=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2022.08.29 10:31:17 =~=~=~=~=~=~=~=~=~=~=~= [ 255.310876] systemd-sysv-generator[2240]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 256.641925] systemd-sysv-generator[2263]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 279.250158] watchdog: watchdog0: watchdog did not stop! [ 279.717684] Trying to unregister non-registered hwtime source [ 282.764719] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 282.766370] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 58500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿänalÿâadc initialized ÿä ÿâfmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized pm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNIÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäNG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.420] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.486] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.612] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.648] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.650] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.748] calling apps_init() [0003.748] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000657] Console: colour dummy device 80x25 [ 0.002169] printk: console [tty0] enabled [ 0.002231] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002292] pid_max: default: 32768 minimum: 301 [ 0.002475] LSM: Security Framework initializing [ 0.002548] Yama: becoming mindful. [ 0.002621] SELinux: Initializing. [ 0.002804] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002845] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005886] rcu: Hierarchical SRCU implementation. [ 0.006121] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006885] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006935] DTB Build time: Aug 10 2022 20:31:49 [ 0.009790] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010058] Remapping and enabling EFI services. [ 0.012137] smp: Bringing up secondary CPUs ... [ 0.041707] Detected PIPT I-cache on CPU1 [ 0.041839] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071345] Detected PIPT I-cache on CPU2 [ 0.071489] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101052] Detected PIPT I-cache on CPU3 [ 0.101192] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130797] Detected PIPT I-cache on CPU4 [ 0.130898] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160567] Detected PIPT I-cache on CPU5 [ 0.160678] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160986] smp: Brought up 1 node, 6 CPUs [ 0.161178] SMP: Total of 6 processors activated. [ 0.161194] CPU features: detected: Privileged Access Never [ 0.161205] CPU features: detected: LSE atomic instructions [ 0.161216] CPU features: detected: User Access Override [ 0.161227] CPU features: detected: 32-bit EL0 Support [ 0.161238] CPU features: detected: RAS Extension Support [ 0.161249] CPU features: detected: CRC32 instructions [ 0.161260] CPU features: detected: 32-bit EL1 Support [ 0.230006] CPU: All CPU(s) started at EL2 [ 0.234985] devtmpfs: initialized [ 0.284413] Registered cp15_barrier emulation handler [ 0.284528] Registered setend emulation handler [ 0.284548] KASLR enabled [ 0.284829] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.284855] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286162] pinctrl core: initialized pinctrl subsystem [ 0.287268] SMBIOS 3.0.0 present. [ 0.287296] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.287901] NET: Registered protocol family 16 [ 0.289934] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.290448] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291132] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291196] audit: initializing netlink subsys (disabled) [ 0.291476] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.291956] thermal_sys: Registered thermal governor 'step_wise' [ 0.291962] thermal_sys: Registered thermal governor 'power_allocator' [ 0.291976] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294335] cpuidle: using governor menu [ 0.294681] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295110] ASID allocator initialised with 32768 entries [ 0.295342] Serial: AMBA PL011 UART driver [ 0.298603] Tegra reboot handler registered. [ 0.372029] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.372156] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.372351] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.372399] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.372553] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.372599] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.372716] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.372762] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372882] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372930] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.375092] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.375127] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.375157] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.375185] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.375215] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375262] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.375302] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375354] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375397] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375428] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.375456] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.375481] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.375507] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.375533] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.375558] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.375583] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.375608] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.375708] mc-err: mcerr ops are set to t19x [ 0.388558] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.388584] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.388595] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.388606] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.394755] ACPI: Interpreter disabled. [ 0.395953] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.397215] iommu: Default domain type: Translated [ 0.397276] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.397680] SCSI subsystem initialized [ 0.397905] usbcore: registered new interface driver usbfs [ 0.397961] usbcore: registered new interface driver hub [ 0.397998] usbcore: registered new device driver usb [ 0.398380] mc: Linux media interface: v0.10 [ 0.398414] videodev: Linux video capture interface: v2.00 [ 0.398714] pps_core: LinuxPPS API ver. 1 registered [ 0.398726] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.398747] PTP clock support registered [ 0.398941] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.399232] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.399318] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.399905] Registered efivars operations [ 0.405701] FPGA manager framework [ 0.405811] Advanced Linux Sound Architecture Driver Initialized. [ 0.406426] Bluetooth: Core ver 2.22 [ 0.406464] NET: Registered protocol family 31 [ 0.406475] Bluetooth: HCI device and connection manager initialized [ 0.406490] Bluetooth: HCI socket layer initialized [ 0.406537] Bluetooth: L2CAP socket layer initialized [ 0.406560] Bluetooth: SCO socket layer initialized [ 0.408144] camchar: rtcpu character device driver loaded [ 0.408800] clocksource: Switched to clocksource arch_sys_counter [ 0.711978] VFS: Disk quotas dquot_6.6.0 [ 0.712042] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.712336] pnp: PnP ACPI: disabled [ 0.725037] la/ptsa driver initialized. [ 0.725154] NET: Registered protocol family 2 [ 0.725334] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.730260] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.730332] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.730650] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.731077] TCP: Hash tables configured (established 65536 bind 65536) [ 0.731206] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.731304] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.731488] NET: Registered protocol family 1 [ 0.732113] RPC: Registered named UNIX socket transport module. [ 0.732129] RPC: Registered udp transport module. [ 0.732139] RPC: Registered tcp transport module. [ 0.732167] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.732182] PCI: CLS 0 bytes, default 64 [ 0.732383] Trying to unpack rootfs image as initramfs... [ 0.925754] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.927928] Freeing initrd memory: 8196K [ 0.931824] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.931872] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.931919] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.932330] kvm [1]: IPA Size Limit: 40 bits [ 0.932903] kvm [1]: vgic interrupt IRQ9 [ 0.933429] kvm [1]: VHE mode initialized successfully [ 0.934799] Initialise system trusted keyrings [ 0.935075] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.940356] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.941086] NFS: Registering the id_resolver key type [ 0.941131] Key type id_resolver registered [ 0.941142] Key type id_legacy registered [ 0.941244] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.941263] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.941290] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.952516] NET: Registered protocol family 38 [ 0.952537] Key type asymmetric registered [ 0.952566] Asymmetric key parser 'x509' registered [ 0.952620] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.952821] io scheduler mq-deadline registered [ 0.952833] io scheduler kyber registered [ 0.957542] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.960037] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.960095] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.960147] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.960197] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.960246] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.964509] scrncapt: init (heads:4 wins:6 planes:4) [ 0.964715] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.965540] EINJ: ACPI disabled. [ 0.967866] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.967889] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.967899] tegra-pmc: ### PMC reset level: L1 [ 0.967908] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.967942] tegra-pmc: PMC Prod config success [ 0.972882] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.977069] random: fast init done [ 0.977197] printk: console [ttyTCU0] enabled [ 2.530660] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.534505] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.538714] arm-smmu 10000000.iommu: stage 1 translation [ 2.544210] arm-smmu 10000000.iommu: stage 2 translation [ 2.549999] arm-smmu 10000000.iommu: nested translation [ 2.555083] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.562259] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.574023] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.575581] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.581921] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.590248] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.595218] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.599934] arm-smmu 12000000.iommu: stage 1 translation [ 2.605186] arm-smmu 12000000.iommu: stage 2 translation [ 2.610607] arm-smmu 12000000.iommu: nested translation [ 2.616292] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.623216] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.634902] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.636311] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.643169] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.650614] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.660443] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.663670] tegra_profiler: auth: init [ 2.667895] THERMAL EST: found 3 subdevs [ 2.671250] THERMAL EST num_resources: 0 [ 2.674834] [THERMAL EST subdev 0] [ 2.678413] [THERMAL EST subdev 1] [ 2.681570] [THERMAL EST subdev 2] [ 2.684832] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.691308] THERMAL EST: thz register success. [ 2.695547] THERMAL EST: end of probe, return err: 0 [ 2.700914] nvsciipc: loaded module [ 2.708588] tun: Universal TUN/TAP device driver, 1.6 [ 2.710396] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.716846] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.722140] e1000e: Intel(R) PRO/1000 Network Driver [ 2.727326] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.733409] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.738703] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.744892] PPP generic driver version 2.4.2 [ 2.749146] PPP BSD Compression module registered [ 2.753680] PPP Deflate Compression module registered [ 2.758925] PPP MPPE Compression module registered [ 2.763942] usbcore: registered new interface driver r8152 [ 2.769199] usbcore: registered new interface driver asix [ 2.774528] usbcore: registered new interface driver ax88179_178a [ 2.780653] usbcore: registered new interface driver cdc_ether [ 2.786854] usbcore: registered new interface driver net1080 [ 2.792198] usbcore: registered new interface driver cdc_subset [ 2.798239] usbcore: registered new interface driver zaurus [ 2.804191] usbcore: registered new interface driver cdc_ncm [ 2.809614] usbcore: registered new interface driver aqc111 [ 2.815508] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.821341] ohci-pci: OHCI PCI platform driver [ 2.825882] ohci-platform: OHCI generic platform driver [ 2.831554] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.838273] usbcore: registered new interface driver uas [ 2.842188] usbcore: registered new interface driver usb-storage [ 2.848337] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.854341] mousedev: PS/2 mouse device common for all mice [ 2.859076] usbcore: registered new interface driver xpad [ 2.867184] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.870082] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.877614] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.884228] i2c /dev entries driver [ 2.887523] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.893560] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.898832] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.904476] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.909430] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.914853] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.920267] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.934648] device-mapper: uevent: version 1.0.3 [ 2.935144] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.941202] cpuidle: Initializing cpuidle driver [ 2.945003] sdhci: Secure Digital Host Controller Interface driver [ 2.949427] sdhci: Copyright(c) Pierre Ossman [ 2.953524] Synopsys Designware Multimedia Card Interface Driver [ 2.959761] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.966008] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.966668] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.979044] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.999479] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.008309] vdd-1v0: supplied by regulator-dummy [ 3.013756] vdd-1v8-hs: supplied by regulator-dummy [ 3.018512] vdd-1v8-ls: supplied by regulator-dummy [ 3.023305] vdd-1v8-ao: supplied by regulator-dummy [ 3.027136] vddio-ddr-1v1: supplied by regulator-dummy [ 3.031630] vdd-rtc: supplied by regulator-dummy [ 3.033308] spmic-ldo1: supplied by regulator-dummy [ 3.034516] vdd-ao-3v3: supplied by regulator-dummy [ 3.040594] vddio-emmc-3v3: supplied by regulator-dummy [ 3.046745] spmic-ldo4: supplied by regulator-dummy [ 3.047906] vdd-usb-3v3: supplied by regulator-dummy [ 3.053991] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.060047] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.065451] spmic-ldo8: supplied by vdd-1v8-ls [ 3.066779] gpio-510 (gpio_default): hogged as output/high [ 3.068069] gpio-511 (gpio_default): hogged as output/high [ 3.072559] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.210919] max77686-rtc max77620-rtc: registered as rtc0 [ 3.211897] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.212231] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.922444] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.923501] hid: raw HID events driver (C) Jiri Kosina [ 3.924255] usbcore: registered new interface driver usbhid [ 3.924397] usbhid: USB HID core driver [ 3.926204] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.927378] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.040585] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.115783] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.009 ms) ÿá[ 4.012377] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.013249] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.014395] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.015261] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.017080] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.017805] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.018413] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.019805] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.020188] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.021634] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.022182] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.029267] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.036099] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.043603] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.056142] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.062652] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.067505] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.074785] denver_knobs_init:MTS_VERSION:55637613 [ 4.087570] t19x_cache tegra-cache: probed [ 4.091072] optee: probing for conduit method. [ 4.091907] optee: revision 3.16 (65cc2218) [ 4.093025] optee: dynamic shared memory is enabled [ 4.094485] optee: initialized driver [ 4.100608] nvpmodel: initialized successfully [ 4.101856] tegra_hv: get_hvd: not initialized yet [ 4.106602] user_ivc_mempool: hypervisor not present [ 4.112939] usbcore: registered new interface driver snd-usb-audio [ 4.119465] u32 classifier [ 4.120955] input device check on [ 4.124224] Actions configured [ 4.128237] Initializing XFRM netlink socket [ 4.133298] NET: Registered protocol family 10 [ 4.139543] Segment Routing with IPv6 [ 4.140142] NET: Registered protocol family 17 [ 4.144437] NET: Registered protocol family 15 [ 4.149155] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.162715] Bluetooth: RFCOMM socket layer initialized [ 4.167383] Bluetooth: RFCOMM ver 1.11 [ 4.171268] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.177112] Bluetooth: HIDP socket layer initialized [ 4.182566] 9pnet: Installing 9P2000 support [ 4.186342] Key type dns_resolver registered [ 4.192578] registered taskstats version 1 [ 4.194772] Loading compiled-in X.509 certificates [ 4.207964] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.210909] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.221607] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.222907] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.231539] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.239615] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.356927] tegra194-pcie 14160000.pcie: Link up [ 4.359784] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.360018] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.360174] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.360415] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.360669] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.361117] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.361568] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.375169] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.375685] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.376146] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.377932] pci 0004:01:00.0: supports D1 D2 [ 4.378146] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.387507] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.387839] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.388055] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.388434] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.388732] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.388983] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.391501] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.398905] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.407697] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.417722] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.422239] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.428302] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.435120] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.444779] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.445727] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.454172] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.462388] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.560922] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.561650] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.561852] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.562003] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.562263] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.562497] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.562959] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.563394] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.579085] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.579431] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.581948] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.583449] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.585406] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.587086] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.588037] pci 0005:00:00.0: Removing from iommu group 7 [ 5.588307] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.618297] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.640679] host1x 13e10000.host1x: initialized [ 5.642551] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.643454] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.644624] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.645610] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.646765] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.647386] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.648482] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.649263] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.654251] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.661006] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.671188] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.678181] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.688185] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.694828] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.704710] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.712063] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.721652] falcon 15340000.vic: Adding to iommu group 17 [ 5.736082] falcon 15340000.vic: initialized [ 5.737333] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.743128] falcon 15380000.nvjpg: initialized [ 5.743712] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.754234] falcon 154c0000.nvenc: initialized [ 5.754885] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.764180] falcon 15a80000.nvenc1: initialized [ 5.764981] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.776925] nvdec 15480000.nvdec: initialized [ 5.777633] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.787954] nvdec 15140000.nvdec1: initialized [ 5.788644] tsec 15500000.tsec: Adding to iommu group 18 [ 5.794652] tsec 15500000.tsec: initialized [ 5.795282] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.801874] tsec 15100000.tsecb: initialized [ 5.805642] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.833306] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.845984] gpio-374 (wifi-enable): hogged as output/high [ 5.846273] gpio-431 (camera-control-output-low): hogged as output/low [ 5.846596] gpio-432 (camera-control-output-low): hogged as output/low [ 5.848101] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.849394] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.849911] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.853003] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.858331] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.865126] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.869827] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.878116] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.885743] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.897333] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.902518] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.907963] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.916962] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.926344] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.934249] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.941014] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.947149] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.956722] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.963046] pva 16000000.pva0: Adding to iommu group 22 [ 5.988927] pva 16000000.pva0: initialized [ 5.994051] pva 16800000.pva1: Adding to iommu group 23 [ 6.005165] pva 16800000.pva1: initialized [ 6.009382] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.022494] nvdla 15880000.nvdla0: initialized [ 6.024047] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.032343] nvdla 158c0000.nvdla1: initialized [ 6.034687] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.034972] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.035319] tegradccommon 15200000.display-hub: dma mapping done [ 6.037663] tegradc 15200000.display: Adding to iommu group 26 [ 6.045455] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.045829] generic_infoframe_type: 0x87 [ 6.046056] tegradc 15200000.display: DT parsed successfully [ 6.046376] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.052354] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.054653] tegradc 15210000.display: Adding to iommu group 26 [ 6.059606] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.072314] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.072652] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.078951] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.085574] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.093714] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.099598] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.112859] tegra_cec 3960000.tegra_cec: probed [ 6.117875] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.118514] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.123585] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.135955] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.137362] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.153378] kfuse 3830000.kfuse: initialized [ 6.158266] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.158280] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.171095] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.171260] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.178237] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.186549] tegradc 15210000.display: disp0 connected to head1->sor [ 6.191273] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.196977] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.207138] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.213094] tegradc 15210000.display: DT parsed successfully [ 6.219480] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.224494] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.242419] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.247793] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.267320] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.267675] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.271140] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.279159] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.288037] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.294932] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.301956] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.309295] usb usb1: Product: xHCI Host Controller [ 6.314220] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.320274] usb usb1: SerialNumber: 3610000.xhci [ 6.326211] hub 1-0:1.0: USB hub found [ 6.329118] hub 1-0:1.0: 4 ports detected [ 6.333428] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.338485] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.346160] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.353939] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.361448] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.368908] usb usb2: Product: xHCI Host Controller [ 6.373707] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.380115] usb usb2: SerialNumber: 3610000.xhci [ 6.386143] hub 2-0:1.0: USB hub found [ 6.388432] hub 2-0:1.0: 4 ports detected [ 6.429327] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.435540] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.437193] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.437403] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.451058] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.452141] tegra194-cpufreq ccplex: probed with BWMGR [ 6.453490] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.454120] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.454701] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.456038] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.465160] tegra194-vi5 15c10000.vi: initialized [ 6.465340] mmc0: CQHCI version 5.10 [ 6.466683] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.468083] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.472220] generic_infoframe_type: 0x87 [ 6.478611] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.482632] tegradc 15200000.display: DT parsed successfully [ 6.490463] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.495057] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.496013] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.502784] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.511333] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.518439] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.524999] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.525004] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.525347] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.533308] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.544870] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.547921] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.556332] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.562260] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.568487] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.576125] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.582096] mmc0: Command Queue Engine enabled [ 6.582951] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.583023] nvethernet 2490000.ethernet: Macsec not supported [ 6.584294] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.585488] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.585595] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.585701] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.587031] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.588263] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.588618] tegra-se-nvhost 15810000.se: initialized [ 6.593665] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.594159] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.594900] tegra-se-nvhost 15820000.se: initialized [ 6.596764] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.597311] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.597988] tegra-se-nvhost 15830000.se: initialized [ 6.599213] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.599304] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.599778] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.600411] tegra-se-nvhost 15840000.se: initialized [ 6.602323] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.603872] tegra_actmon d230000.actmon: in actmon_register()... [ 6.604026] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.604370] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.604919] hvc_sysfs: hypervisor is not present [ 6.634110] ALSA device list: [ 6.644793] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.644797] ************************************** [ 6.644800] CPU:0, Error:cbb-noc [ 6.644803] Error Logger : 0 [ 6.644812] ErrLog0 : 0x80030000 [ 6.644814] Transaction Type : RD - Read, Incrementing [ 6.644817] Error Code : SLV [ 6.644837] Error Source : Target [ 6.644840] Error Description : Target error detected by CBB slave [ 6.644850] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.644855] Packet header Lock : 0 [ 6.644857] Packet header Len1 : 3 [ 6.644859] NOC protocol version : version >= 2.7 [ 6.644863] ErrLog1 : 0x352426 [ 6.644870] ErrLog2 : 0x0 [ 6.644875] mmc0: periodic cache flush enabled [ 6.644890] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.645055] No soundcards found. [ 6.652027] RouteId : 0x352426 [ 6.652031] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.652033] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.860983] TargSubRange : 18 [ 6.860986] SeqId : 0 [ 6.860989] ErrLog3 : 0x4045c [ 6.860992] ErrLog4 : 0x0 [ 6.860998] Address accessed : 0x15b4045c [ 6.877783] ErrLog5 : 0x989f851 [ 6.877786] Non-Modify : 0x1 [ 6.877789] AXI ID : 0x13 [ 6.877793] Master ID : CCPLEX [ 6.877796] Security Group(GRPSEC): 0x7e [ 6.877798] Cache : 0x1 -- Bufferable [ 6.877801] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.877804] FALCONSEC : 0x0 [ 6.877806] Virtual Queuing Channel(VQC): 0x0 [ 6.877810] ************************************** [ 6.877848] ------------[ cut here ]------------ [ 6.923796] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.930360] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.935610] Modules linked in: [ 6.938588] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 6.945233] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.957489] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.963271] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 6.968249] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 6.972971] sp : ffff800010003b30 [ 6.976126] x29: ffff800010003b30 x28: 0000000000000001 [ 6.981809] x27: 0000000000000005 x26: ffffa92c60ee3f58 [ 6.987234] x25: ffffa92c6183ce10 x24: 0000000000000001 [ 6.992659] x23: ffffa92c611d7000 x22: ffffa92c6165ea00 [ 6.997995] x21: 000000000000000f x20: ffff5b7200ea4680 [ 7.003509] x19: ffffa92c6165ea00 x18: 0000000000000020 [ 7.008678] x17: 0000000000000007 x16: 000000000000000e [ 7.014014] x15: ffffa92c614d2bf0 x14: ffffffffffffffff [ 7.019526] x13: ffffa92c617eade8 x12: ffffa92c617eaa2d [ 7.025296] x11: 0000000000000038 x10: 0101010101010101 [ 7.030810] x9 : ffff800010003a40 x8 : 2a2a2a2a2a2a2a2a [ 7.036322] x7 : 2a2a2a2a2a2a2a2a x6 : 000000002b0ca80a [ 7.041835] x5 : 000000000000000c x4 : 00000000fffff2c0 [ 7.047260] x3 : 00000000ffffffff x2 : ffffa92c5f97e090 [ 7.052339] x1 : ffffa92c614d2680 x0 : 0000000000010101 [ 7.057934] Call trace: [ 7.060403] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.064420] __handle_irq_event_percpu+0x68/0x2a0 [ 7.069243] handle_irq_event_percpu+0x40/0xa0 [ 7.073688] handle_irq_event+0x50/0xf0 [ 7.077192] handle_fasteoi_irq+0xc0/0x170 [ 7.081217] generic_handle_irq+0x40/0x60 [ 7.085499] __handle_domain_irq+0x70/0xd0 [ 7.089701] efi_header_end+0xb0/0xf0 [ 7.093199] el1_irq+0xd0/0x180 [ 7.096173] __do_softirq+0xb4/0x3e8 [ 7.099863] irq_exit+0xc0/0xe0 [ 7.102566] __handle_domain_irq+0x74/0xd0 [ 7.106848] efi_header_end+0xb0/0xf0 [ 7.110524] el1_irq+0xd0/0x180 [ 7.113243] cpuidle_enter_state+0xb8/0x410 [ 7.117525] cpuidle_enter+0x40/0x60 [ 7.121199] call_cpuidle+0x44/0x80 [ 7.124441] do_idle+0x208/0x270 [ 7.127694] cpu_startup_entry+0x30/0x70 [ 7.131530] rest_init+0xdc/0xe8 [ 7.135202] arch_call_rest_init+0x18/0x20 [ 7.139400] start_kernel+0x514/0x54c [ 7.142738] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.148947] ---[ end trace 8bdaec764ca6010d ]--- [ 7.153490] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.161031] SMP: stopping secondary CPUs [ 7.165138] Kernel Offset: 0x292c4f7c0000 from 0xffff800010000000 [ 7.171422] PHYS_OFFSET: 0xffffa48f00000000 [ 7.175277] CPU features: 0x8240002,03802a30 [ 7.179996] Memory Limit: none [ 7.182894] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 62500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäalÿâadc initialized ÿä ÿâfmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized entering main console loop ] extras_post initialized bpmp: init complete ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> hdmi cable connected [0003.600] W> set volts not configured for 'vdd-1v0' [0003.605] W> set volts not configured for 'vdd-1v8-hs' [0003.605] I> retrieved tmds range from prod_list_hdmi_soc [0003.610] E> invalid display type [0003.611] E> cannot find any other nvdisp nodes [0003.627] I> edid read success [0003.639] I> edid read success [0003.640] I> width = 640, height = 480, frequency = 25174825 [0003.640] I> width = 1920, height = 1080, frequency = 148500000 [0003.641] I> width = 1280, height = 768, frequency = 79500000 [0003.641] I> width = 1360, height = 768, frequency = 85500000 [0003.641] I> width = 720, height = 480, frequency = 26973026 [0003.645] I> width = 720, height = 576, frequency = 26973026 [0003.651] I> width = 1280, height = 720, frequency = 74175824 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1920, height = 1080, frequency = 148351648 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 720, height = 480, frequency = 26973026 [0003.679] I> width = 720, height = 576, frequency = 26973026 [0003.685] I> width = 3840, height = 2160, frequency = 296703296 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 4096, height = 2160, frequency = 296703296 [0003.713] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.725] I> hdmi_enable, starting HDMI initialisation [0003.730] I> hdmi_enable, HDMI initialisation complete [0003.739] initializing target [0003.740] calling apps_init() [0003.741] starting app kernel_boot_app [0003.742] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000715] Console: colour dummy device 80x25 [ 0.002184] printk: console [tty0] enabled [ 0.002252] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002289] pid_max: default: 32768 minimum: 301 [ 0.002481] LSM: Security Framework initializing [ 0.002540] Yama: becoming mindful. [ 0.002584] SELinux: Initializing. [ 0.002739] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002784] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005818] rcu: Hierarchical SRCU implementation. [ 0.006052] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006937] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006994] DTB Build time: Aug 10 2022 20:31:49 [ 0.009978] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010260] Remapping and enabling EFI services. [ 0.012253] smp: Bringing up secondary CPUs ... [ 0.042034] Detected PIPT I-cache on CPU1 [ 0.042139] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073430] Detected PIPT I-cache on CPU2 [ 0.073531] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103148] Detected PIPT I-cache on CPU3 [ 0.103372] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133165] Detected PIPT I-cache on CPU4 [ 0.133266] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162929] Detected PIPT I-cache on CPU5 [ 0.163025] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163408] smp: Brought up 1 node, 6 CPUs [ 0.163613] SMP: Total of 6 processors activated. [ 0.163687] CPU features: detected: Privileged Access Never [ 0.163728] CPU features: detected: LSE atomic instructions [ 0.163742] CPU features: detected: User Access Override [ 0.163755] CPU features: detected: 32-bit EL0 Support [ 0.163768] CPU features: detected: RAS Extension Support [ 0.163781] CPU features: detected: CRC32 instructions [ 0.163794] CPU features: detected: 32-bit EL1 Support [ 0.228936] CPU: All CPU(s) started at EL2 [ 0.234676] devtmpfs: initialized [ 0.282317] Registered cp15_barrier emulation handler [ 0.282488] Registered setend emulation handler [ 0.282509] KASLR enabled [ 0.282736] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.282759] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.284115] pinctrl core: initialized pinctrl subsystem [ 0.285089] SMBIOS 3.0.0 present. [ 0.285117] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.285764] NET: Registered protocol family 16 [ 0.287750] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.288262] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.289255] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.289314] audit: initializing netlink subsys (disabled) [ 0.289584] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.290007] thermal_sys: Registered thermal governor 'step_wise' [ 0.290014] thermal_sys: Registered thermal governor 'power_allocator' [ 0.290029] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.291996] cpuidle: using governor menu [ 0.292316] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.292778] ASID allocator initialised with 32768 entries [ 0.293000] Serial: AMBA PL011 UART driver [ 0.296370] Tegra reboot handler registered. [ 0.357906] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.358052] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.358242] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.358286] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.358401] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.358442] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.358550] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.358611] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.358762] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.358803] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.361290] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.361327] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.361357] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.361386] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.361431] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.361470] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.361520] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.361550] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.361576] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.361618] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.361646] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.361673] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.361730] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.361755] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.361780] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.361805] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.361829] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.361917] mc-err: mcerr ops are set to t19x [ 0.373450] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.373473] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.373486] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.373499] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.380785] ACPI: Interpreter disabled. [ 0.381934] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.383312] iommu: Default domain type: Translated [ 0.383374] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.383750] SCSI subsystem initialized [ 0.383895] usbcore: registered new interface driver usbfs [ 0.383933] usbcore: registered new interface driver hub [ 0.383965] usbcore: registered new device driver usb [ 0.384417] mc: Linux media interface: v0.10 [ 0.384446] videodev: Linux video capture interface: v2.00 [ 0.384798] pps_core: LinuxPPS API ver. 1 registered [ 0.384810] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.384834] PTP clock support registered [ 0.385069] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.385398] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.385506] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.386274] Registered efivars operations [ 0.391884] FPGA manager framework [ 0.392008] Advanced Linux Sound Architecture Driver Initialized. [ 0.392595] Bluetooth: Core ver 2.22 [ 0.392652] NET: Registered protocol family 31 [ 0.392665] Bluetooth: HCI device and connection manager initialized [ 0.392680] Bluetooth: HCI socket layer initialized [ 0.392697] Bluetooth: L2CAP socket layer initialized [ 0.392718] Bluetooth: SCO socket layer initialized [ 0.394382] camchar: rtcpu character device driver loaded [ 0.395071] clocksource: Switched to clocksource arch_sys_counter [ 0.683968] VFS: Disk quotas dquot_6.6.0 [ 0.684048] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.684415] pnp: PnP ACPI: disabled [ 0.696630] la/ptsa driver initialized. [ 0.696758] NET: Registered protocol family 2 [ 0.696922] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.703203] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.703322] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.703574] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.704002] TCP: Hash tables configured (established 65536 bind 65536) [ 0.704122] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.704219] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.704442] NET: Registered protocol family 1 [ 0.705042] RPC: Registered named UNIX socket transport module. [ 0.705057] RPC: Registered udp transport module. [ 0.705067] RPC: Registered tcp transport module. [ 0.705076] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.705093] PCI: CLS 0 bytes, default 64 [ 0.705284] Trying to unpack rootfs image as initramfs... [ 0.889972] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.892107] Freeing initrd memory: 8196K [ 0.896378] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.896432] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.896483] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.896955] kvm [1]: IPA Size Limit: 40 bits [ 0.897554] kvm [1]: vgic interrupt IRQ9 [ 0.898124] kvm [1]: VHE mode initialized successfully [ 0.899840] Initialise system trusted keyrings [ 0.900111] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.906589] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.907536] NFS: Registering the id_resolver key type [ 0.907569] Key type id_resolver registered [ 0.907584] Key type id_legacy registered [ 0.907706] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.907732] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.907774] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.917521] NET: Registered protocol family 38 [ 0.917558] Key type asymmetric registered [ 0.917573] Asymmetric key parser 'x509' registered [ 0.917618] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.917849] io scheduler mq-deadline registered [ 0.917870] io scheduler kyber registered [ 0.924281] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.927269] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.927356] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.927431] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.927503] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.927574] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.932987] scrncapt: init (heads:4 wins:6 planes:4) [ 0.933190] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.934152] EINJ: ACPI disabled. [ 0.937482] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.937507] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 0.937523] tegra-pmc: ### PMC reset level: L1 [ 0.937538] tegra-pmc: ### PMC reset status reg: 0x9 [ 0.937616] tegra-pmc: PMC Prod config success [ 0.942997] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.947930] random: fast init done [ 0.948099] printk: console [ttyTCU0] enabled [ 2.500379] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.505036] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.509649] arm-smmu 10000000.iommu: stage 1 translation [ 2.514837] arm-smmu 10000000.iommu: stage 2 translation [ 2.520604] arm-smmu 10000000.iommu: nested translation [ 2.525675] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.532853] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.543395] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.546469] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.552804] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.560775] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.565836] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.570559] arm-smmu 12000000.iommu: stage 1 translation [ 2.576329] arm-smmu 12000000.iommu: stage 2 translation [ 2.581494] arm-smmu 12000000.iommu: nested translation [ 2.587186] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.594360] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.604575] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.607482] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.614042] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.621197] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.631403] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.634199] tegra_profiler: auth: init [ 2.638701] THERMAL EST: found 3 subdevs [ 2.641874] THERMAL EST num_resources: 0 [ 2.645996] [THERMAL EST subdev 0] [ 2.649039] [THERMAL EST subdev 1] [ 2.652709] [THERMAL EST subdev 2] [ 2.655718] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.662179] THERMAL EST: thz register success. [ 2.666398] THERMAL EST: end of probe, return err: 0 [ 2.671760] nvsciipc: loaded module [ 2.679172] tun: Universal TUN/TAP device driver, 1.6 [ 2.681643] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.687723] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.693029] e1000e: Intel(R) PRO/1000 Network Driver [ 2.698210] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.704070] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.709584] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.715853] PPP generic driver version 2.4.2 [ 2.719807] PPP BSD Compression module registered [ 2.724580] PPP Deflate Compression module registered [ 2.729817] PPP MPPE Compression module registered [ 2.734570] usbcore: registered new interface driver r8152 [ 2.740337] usbcore: registered new interface driver asix [ 2.745671] usbcore: registered new interface driver ax88179_178a [ 2.751789] usbcore: registered new interface driver cdc_ether [ 2.757493] usbcore: registered new interface driver net1080 [ 2.763141] usbcore: registered new interface driver cdc_subset [ 2.769145] usbcore: registered new interface driver zaurus [ 2.775107] usbcore: registered new interface driver cdc_ncm [ 2.780761] usbcore: registered new interface driver aqc111 [ 2.786383] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.792207] ohci-pci: OHCI PCI platform driver [ 2.796770] ohci-platform: OHCI generic platform driver [ 2.802336] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.808896] usbcore: registered new interface driver uas [ 2.813070] usbcore: registered new interface driver usb-storage [ 2.818930] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.825252] mousedev: PS/2 mouse device common for all mice [ 2.829960] usbcore: registered new interface driver xpad [ 2.838241] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.840974] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.848748] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.855091] i2c /dev entries driver [ 2.858374] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.864586] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.869522] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.874873] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.880240] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.885708] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.891223] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.904986] device-mapper: uevent: version 1.0.3 [ 2.905441] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.911872] cpuidle: Initializing cpuidle driver [ 2.915808] sdhci: Secure Digital Host Controller Interface driver [ 2.920555] sdhci: Copyright(c) Pierre Ossman [ 2.924657] Synopsys Designware Multimedia Card Interface Driver [ 2.930620] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.936802] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.937445] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.949800] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.968411] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.977092] vdd-1v0: supplied by regulator-dummy [ 2.982456] vdd-1v8-hs: supplied by regulator-dummy [ 2.987109] vdd-1v8-ls: supplied by regulator-dummy [ 2.991808] vdd-1v8-ao: supplied by regulator-dummy [ 2.995583] vddio-ddr-1v1: supplied by regulator-dummy [ 2.999891] vdd-rtc: supplied by regulator-dummy [ 3.001468] spmic-ldo1: supplied by regulator-dummy [ 3.002621] vdd-ao-3v3: supplied by regulator-dummy [ 3.008629] vddio-emmc-3v3: supplied by regulator-dummy [ 3.014757] spmic-ldo4: supplied by regulator-dummy [ 3.015914] vdd-usb-3v3: supplied by regulator-dummy [ 3.021932] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.028021] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.033489] spmic-ldo8: supplied by vdd-1v8-ls [ 3.034848] gpio-510 (gpio_default): hogged as output/high [ 3.036572] gpio-511 (gpio_default): hogged as output/high [ 3.043685] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.182348] max77686-rtc max77620-rtc: registered as rtc0 [ 3.183624] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.183961] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.911961] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.913182] hid: raw HID events driver (C) Jiri Kosina [ 3.914007] usbcore: registered new interface driver usbhid [ 3.914182] usbhid: USB HID core driver [ 3.916251] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.917540] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.007489] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.081843] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.164 ms) ÿá[ 4.002012] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.002590] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.003737] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.004673] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.006380] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.007260] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.007844] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.009105] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.009352] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.011882] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.011939] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.012205] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.024622] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.038330] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.042931] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.049317] denver_knobs_init:MTS_VERSION:55637613 [ 4.061490] t19x_cache tegra-cache: probed [ 4.064421] optee: probing for conduit method. [ 4.065335] optee: revision 3.16 (65cc2218) [ 4.066377] optee: dynamic shared memory is enabled [ 4.070558] optee: initialized driver [ 4.076521] nvpmodel: initialized successfully [ 4.077959] tegra_hv: get_hvd: not initialized yet [ 4.082752] user_ivc_mempool: hypervisor not present [ 4.088511] usbcore: registered new interface driver snd-usb-audio [ 4.095139] u32 classifier [ 4.096655] input device check on [ 4.100363] Actions configured [ 4.103883] Initializing XFRM netlink socket [ 4.108800] NET: Registered protocol family 10 [ 4.114907] Segment Routing with IPv6 [ 4.116042] NET: Registered protocol family 17 [ 4.120506] NET: Registered protocol family 15 [ 4.124706] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.138499] Bluetooth: RFCOMM socket layer initialized [ 4.143223] Bluetooth: RFCOMM ver 1.11 [ 4.146824] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.152968] Bluetooth: HIDP socket layer initialized [ 4.158483] 9pnet: Installing 9P2000 support [ 4.162164] Key type dns_resolver registered [ 4.168003] registered taskstats version 1 [ 4.170533] Loading compiled-in X.509 certificates [ 4.184393] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.186260] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.196746] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.198501] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.207354] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.215443] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.331183] tegra194-pcie 14160000.pcie: Link up [ 4.333989] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.334266] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.334427] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.334750] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.335011] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.335711] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.336222] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.349765] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.350357] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.350955] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.352852] pci 0004:01:00.0: supports D1 D2 [ 4.353037] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.365925] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.366295] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.366713] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.367435] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.367733] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.367985] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.368437] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.373416] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.381696] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.392180] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.396434] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.402417] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.409131] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.418184] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.419855] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.428129] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.436788] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.551689] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.552359] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.552713] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.552997] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.553352] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.553652] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.554224] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.554822] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.577429] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.577786] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.579826] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.581078] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.582783] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.584874] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.585878] pci 0005:00:00.0: Removing from iommu group 7 [ 5.586232] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.622545] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.650234] host1x 13e10000.host1x: initialized [ 5.652589] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.653636] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.655519] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.656387] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.657920] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.659199] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.660845] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.661789] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.663635] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.664632] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.666087] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.669260] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.679620] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.686123] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.695793] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.702704] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.712527] falcon 15340000.vic: Adding to iommu group 17 [ 5.728285] falcon 15340000.vic: initialized [ 5.729313] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.735160] falcon 15380000.nvjpg: initialized [ 5.735818] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.745267] falcon 154c0000.nvenc: initialized [ 5.745880] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.755916] falcon 15a80000.nvenc1: initialized [ 5.756523] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.768021] nvdec 15480000.nvdec: initialized [ 5.768592] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.779215] nvdec 15140000.nvdec1: initialized [ 5.779666] tsec 15500000.tsec: Adding to iommu group 18 [ 5.785938] tsec 15500000.tsec: initialized [ 5.786528] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.792964] tsec 15100000.tsecb: initialized [ 5.797022] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.825782] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.838645] gpio-374 (wifi-enable): hogged as output/high [ 5.838895] gpio-431 (camera-control-output-low): hogged as output/low [ 5.839204] gpio-432 (camera-control-output-low): hogged as output/low [ 5.841139] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.842867] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.843574] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.844969] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.849152] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.855339] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.860458] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.869204] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.876436] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.888108] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.893208] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.898726] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.907548] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.917158] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.924484] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.931786] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.937802] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.947671] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.953944] pva 16000000.pva0: Adding to iommu group 22 [ 5.982720] pva 16000000.pva0: initialized [ 5.987654] pva 16800000.pva1: Adding to iommu group 23 [ 5.998925] pva 16800000.pva1: initialized [ 6.003009] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.016118] nvdla 15880000.nvdla0: initialized [ 6.017701] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.027364] nvdla 158c0000.nvdla1: initialized [ 6.030905] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.031262] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.031631] tegradccommon 15200000.display-hub: dma mapping done [ 6.031710] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.032026] tegradc 15200000.display: Adding to iommu group 26 [ 6.032195] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.034230] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.038351] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.039637] tegradc 15210000.display: Adding to iommu group 26 [ 6.039935] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.040021] generic_infoframe_type: 0x87 [ 6.040102] tegradc 15200000.display: DT parsed successfully [ 6.040197] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.043871] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.050535] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.055537] tegra_cec 3960000.tegra_cec: probed [ 6.056609] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.059576] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.067783] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.073417] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.074936] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.079757] kfuse 3830000.kfuse: initialized [ 6.087311] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.088873] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.092920] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.101455] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.106229] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.106906] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.113929] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.121536] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.122658] random: crng init done [ 6.130150] tegradc 15210000.display: disp0 connected to head1->sor [ 6.133652] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.137716] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.161414] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.168321] tegradc 15210000.display: DT parsed successfully [ 6.175896] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.181217] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.241721] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.263142] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.263678] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.264875] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.273122] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.281899] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.289015] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.295881] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.303475] usb usb1: Product: xHCI Host Controller [ 6.308083] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.314378] usb usb1: SerialNumber: 3610000.xhci [ 6.320325] hub 1-0:1.0: USB hub found [ 6.322923] hub 1-0:1.0: 4 ports detected [ 6.327702] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.332590] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.339981] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.347998] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.355833] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.363046] usb usb2: Product: xHCI Host Controller [ 6.368007] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.374227] usb usb2: SerialNumber: 3610000.xhci [ 6.379769] hub 2-0:1.0: USB hub found [ 6.382397] hub 2-0:1.0: 4 ports detected [ 6.426481] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.433183] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.434900] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.435166] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.448578] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.449648] tegra194-cpufreq ccplex: probed with BWMGR [ 6.451046] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.451600] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.452062] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.453352] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.461247] tegra194-vi5 15c10000.vi: initialized [ 6.461659] mmc0: CQHCI version 5.10 [ 6.462866] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.464298] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.466576] generic_infoframe_type: 0x87 [ 6.473018] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.476474] tegradc 15200000.display: DT parsed successfully [ 6.484819] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.490372] tegradc 15200000.display: Display dc.0000000017632fef registered with id=0 [ 6.490841] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.496646] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.505688] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.512549] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.512559] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.519374] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.535114] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.540453] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.540826] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.548868] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.554990] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.563132] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.569919] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.573678] mmc0: Command Queue Engine enabled [ 6.573682] mmc0: periodic cache flush enabled [ 6.573694] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.574214] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.576264] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.587107] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.591427] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.591905] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.591910] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.594028] tegradc 15200000.display: probed [ 6.601377] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.604778] nvethernet 2490000.ethernet: Macsec not supported [ 6.649301] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.683087] Console: switching to colour frame buffer device 240x67 [ 6.684027] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.688784] tegradc 15200000.display: fb registered [ 6.699851] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.705531] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.706451] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.712796] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.718906] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.726393] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.739200] tegra-se-nvhost 15810000.se: initialized [ 6.743741] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.749392] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.755737] tegra-se-nvhost 15820000.se: initialized [ 6.761861] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.766736] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.770913] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.773228] tegra-se-nvhost 15830000.se: initialized [ 6.780828] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.788148] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.793100] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.799917] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.803441] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.803945] usb 1-2: Manufacturer: Generic [ 6.804568] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.804577] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.805217] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.805221] Extcon AUX1(HDMI) enable [ 6.810699] tegra-se-nvhost 15840000.se: initialized [ 6.811192] tegradc 15210000.display: disp1 connected to head1->sor [ 6.811498] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.811574] tegradc 15210000.display: DT parsed successfully [ 6.811613] tegradc 15210000.display: Display dc.00000000bce0bfef registered with id=1 [ 6.811749] tegradc 15210000.display: vblank syncpt # 16 for dc 1 [ 6.811760] tegradc 15210000.display: vpulse3 syncpt # 17 for dc 1 [ 6.818430] tegradc 15210000.display: probed [ 6.821064] hub 1-2:1.0: USB hub found [ 6.824605] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.831980] hub 1-2:1.0: 4 ports detected [ 6.840109] tegra_actmon d230000.actmon: in actmon_register()... [ 6.891984] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.893611] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.931184] tegradc 15210000.display: fb registered [ 6.931492] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.945229] hvc_sysfs: hypervisor is not present [ 6.949781] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.955198] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.956087] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.964254] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.971923] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.973972] ALSA device list: [ 6.978666] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.978672] usb 2-3: Manufacturer: Generic [ 6.996341] tegradc 15210000.display: blank - powerdown [ 6.996394] No soundcards found. [ 7.001763] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.001767] Extcon DP: HPD disabled [ 7.001771] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.001799] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.005094] hub 2-3:1.0: USB hub found [ 7.013134] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.040640] tegradc 15200000.display: blank - powerdown [ 7.042450] hub 2-3:1.0: 4 ports detected [ 7.071104] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.071111] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.087236] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.087240] Extcon AUX1(HDMI) disable [ 7.110462] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.111348] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.124396] tegradc 15200000.display: unblank [ 7.125499] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.125707] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.131707] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.133563] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.135676] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.135682] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.137525] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.137529] Extcon AUX1(HDMI) enable [ 7.150344] tegradc 15200000.display: sync windows ret = 247 [ 7.181520] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.182541] Freeing unused kernel memory: 3968K [ 7.183041] Extcon HDMI: HPD enabled [ 7.183052] tegradc 15200000.display: hdmi: plugged [ 7.184711] Run /init as init process [ 7.220295] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.221881] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.223356] usb 1-3: Product: Bluetooth Radio [ 7.224765] usb 1-3: Manufacturer: Realtek [ 7.226060] usb 1-3: SerialNumber: 00e04c000001 [ 7.251934] Root device found: mmcblk0p1 [ 7.255418] Found dev node: /dev/mmcblk0p1 [ 7.291888] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.297129] Rootfs mounted over mmcblk0p1 [ 7.325674] Switching from initrd to actual rootfs [ 7.477928] systemd[1]: System time before build time, advancing clock. [ 7.546936] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.551840] systemd[1]: Detected architecture arm64. [ 7.592180] systemd[1]: Set hostname to . [ 7.759350] systemd-sysv-generator[242]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.119218] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.120855] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.126740] systemd[1]: Created slice system-modprobe.slice. [ 8.131625] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.135823] systemd[1]: Created slice User and Session Slice. [ 8.139222] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.143334] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.146533] systemd[1]: Reached target User and Group Name Lookups. [ 8.149623] systemd[1]: Reached target Slices. [ 8.152758] systemd[1]: Reached target Swap. [ 8.156720] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.160384] systemd[1]: Listening on Syslog Socket. [ 8.163928] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.167232] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.171427] systemd[1]: Listening on Journal Audit Socket. [ 8.174952] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.178589] systemd[1]: Listening on Journal Socket. [ 8.182276] systemd[1]: Listening on udev Control Socket. [ 8.185728] systemd[1]: Listening on udev Kernel Socket. [ 8.194377] systemd[1]: Mounting Huge Pages File System... [ 8.202768] systemd[1]: Mounting POSIX Message Queue File System... [ 8.211672] systemd[1]: Mounting RPC Pipe File System... [ 8.222029] systemd[1]: Mounting Kernel Debug File System... [ 8.230546] systemd[1]: Mounting Kernel Trace File System... [ 8.240842] systemd[1]: Starting Journal Service... [ 8.249796] systemd[1]: Starting Set the console keyboard layout... [ 8.258251] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.261781] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.268524] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.276861] systemd[1]: Started Nameserver information manager. [ 8.281597] systemd[1]: Reached target Network (Pre). [ 8.288378] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.288579] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.295387] systemd[1]: Starting Load Kernel Modules... [ 8.304465] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.312934] systemd[1]: Starting udev Coldplug all Devices... [ 8.324889] systemd[1]: Mounted Huge Pages File System. [ 8.328614] systemd[1]: Mounted POSIX Message Queue File System. [ 8.332237] systemd[1]: Mounted RPC Pipe File System. [ 8.335980] systemd[1]: Mounted Kernel Debug File System. [ 8.337235] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.339426] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.339433] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.339441] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.339445] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.341827] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.347300] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.347546] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.351589] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.353050] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.354854] systemd[1]: Mounted Kernel Trace File System. [ 8.366996] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.373287] systemd[1]: nvfb-udev.service: Succeeded. [ 8.377715] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.391025] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.404055] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.405876] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.413485] systemd[1]: Starting Load/Save Random Seed... [ 8.421261] systemd[1]: Starting Create System Users... [ 8.451125] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.451125] [ 8.472422] systemd[1]: Finished Load/Save Random Seed. [ 8.479341] systemd[1]: Finished Create System Users. [ 8.485861] systemd[1]: Finished Load Kernel Modules. [ 8.490462] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.496868] systemd[1]: Mounting Kernel Configuration File System... [ 8.505180] systemd[1]: Started OP-TEE Client Supplicant. [ 8.513972] systemd[1]: Starting Apply Kernel Variables... [ 8.522397] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.532835] systemd[1]: Finished Set the console keyboard layout. [ 8.537018] systemd[1]: Mounted Kernel Configuration File System. [ 9.960290] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.967020] imx219 9-0010: board setup failed [ 9.981228] imx219: probe of 9-0010 failed with error -121 [ 10.015308] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.023942] imx219 10-0010: board setup failed [ 10.025513] imx219: probe of 10-0010 failed with error -121 [ 10.093230] hot-surface-alert cooling state: 0 -> 1 [ 10.601193] using random self ethernet address [ 10.602383] using random host ethernet address [ 11.568955] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.570186] Creating 1 MTD partitions on "spi6.0": [ 11.571342] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.232432] using random self ethernet address [ 12.233991] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.799755] nvidia: loading out-of-tree module taints kernel. [ 59.957123] watchdog: watchdog0: watchdog did not stop! [ 60.447936] Trying to unregister non-registered hwtime source [ 63.506430] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.508240] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ôÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 63500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.607] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.622] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.651] I> edid read success [0003.651] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.652] I> width = 1280, height = 768, frequency = 79500000 [0003.652] I> width = 1360, height = 768, frequency = 85500000 [0003.653] I> width = 720, height = 480, frequency = 26973026 [0003.657] I> width = 720, height = 576, frequency = 26973026 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 4096, height = 2160, frequency = 296703296 [0003.725] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.736] I> hdmi_enable, starting HDMI initialisation [0003.741] I> hdmi_enable, HDMI initialisation complete [0003.750] initializing target [0003.751] calling apps_init() [0003.752] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000814] Console: colour dummy device 80x25 [ 0.002123] printk: console [tty0] enabled [ 0.002190] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002226] pid_max: default: 32768 minimum: 301 [ 0.002419] LSM: Security Framework initializing [ 0.002515] Yama: becoming mindful. [ 0.002570] SELinux: Initializing. [ 0.002756] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002800] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005721] rcu: Hierarchical SRCU implementation. [ 0.005959] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007007] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007057] DTB Build time: Aug 10 2022 20:31:49 [ 0.011062] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011407] Remapping and enabling EFI services. [ 0.013539] smp: Bringing up secondary CPUs ... [ 0.042580] Detected PIPT I-cache on CPU1 [ 0.042656] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075720] Detected PIPT I-cache on CPU2 [ 0.075815] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105340] Detected PIPT I-cache on CPU3 [ 0.105427] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135066] Detected PIPT I-cache on CPU4 [ 0.135163] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164753] Detected PIPT I-cache on CPU5 [ 0.164844] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165133] smp: Brought up 1 node, 6 CPUs [ 0.165373] SMP: Total of 6 processors activated. [ 0.165467] CPU features: detected: Privileged Access Never [ 0.165494] CPU features: detected: LSE atomic instructions [ 0.165513] CPU features: detected: User Access Override [ 0.165541] CPU features: detected: 32-bit EL0 Support [ 0.165559] CPU features: detected: RAS Extension Support [ 0.165594] CPU features: detected: CRC32 instructions [ 0.165619] CPU features: detected: 32-bit EL1 Support [ 0.242559] CPU: All CPU(s) started at EL2 [ 0.248627] devtmpfs: initialized [ 0.295644] Registered cp15_barrier emulation handler [ 0.295747] Registered setend emulation handler [ 0.295768] KASLR enabled [ 0.296039] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.296080] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.297499] pinctrl core: initialized pinctrl subsystem [ 0.298473] SMBIOS 3.0.0 present. [ 0.298514] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.299123] NET: Registered protocol family 16 [ 0.300986] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.301510] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.302433] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.302489] audit: initializing netlink subsys (disabled) [ 0.302760] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.303174] thermal_sys: Registered thermal governor 'step_wise' [ 0.303181] thermal_sys: Registered thermal governor 'power_allocator' [ 0.303196] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.305560] cpuidle: using governor menu [ 0.305838] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.306282] ASID allocator initialised with 32768 entries [ 0.306519] Serial: AMBA PL011 UART driver [ 0.309969] Tegra reboot handler registered. [ 0.385075] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.385189] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.385360] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.385404] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.385525] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.385584] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.385734] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.385778] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.385920] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.385961] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.388764] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.388794] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.388819] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.388844] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.388872] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.388896] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.388920] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.388943] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.388967] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.388990] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.389013] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.389037] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.389064] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.389090] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.389118] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.389142] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.389166] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.389249] mc-err: mcerr ops are set to t19x [ 0.402368] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.402389] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.402402] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.402414] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.409261] ACPI: Interpreter disabled. [ 0.410486] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.411765] iommu: Default domain type: Translated [ 0.411841] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.412206] SCSI subsystem initialized [ 0.412372] usbcore: registered new interface driver usbfs [ 0.412421] usbcore: registered new interface driver hub [ 0.412457] usbcore: registered new device driver usb [ 0.412885] mc: Linux media interface: v0.10 [ 0.412921] videodev: Linux video capture interface: v2.00 [ 0.413280] pps_core: LinuxPPS API ver. 1 registered [ 0.413295] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.413319] PTP clock support registered [ 0.413552] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.413857] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.414023] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.414648] Registered efivars operations [ 0.420227] FPGA manager framework [ 0.420330] Advanced Linux Sound Architecture Driver Initialized. [ 0.420946] Bluetooth: Core ver 2.22 [ 0.420985] NET: Registered protocol family 31 [ 0.420997] Bluetooth: HCI device and connection manager initialized [ 0.421030] Bluetooth: HCI socket layer initialized [ 0.421046] Bluetooth: L2CAP socket layer initialized [ 0.421085] Bluetooth: SCO socket layer initialized [ 0.422608] camchar: rtcpu character device driver loaded [ 0.423304] clocksource: Switched to clocksource arch_sys_counter [ 0.800666] VFS: Disk quotas dquot_6.6.0 [ 0.800779] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.801100] pnp: PnP ACPI: disabled [ 0.814360] la/ptsa driver initialized. [ 0.814502] NET: Registered protocol family 2 [ 0.814671] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.819226] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.819380] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.819643] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.820075] TCP: Hash tables configured (established 65536 bind 65536) [ 0.820208] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.820306] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.820512] NET: Registered protocol family 1 [ 0.821248] RPC: Registered named UNIX socket transport module. [ 0.821264] RPC: Registered udp transport module. [ 0.821273] RPC: Registered tcp transport module. [ 0.821300] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.821315] PCI: CLS 0 bytes, default 64 [ 0.821527] Trying to unpack rootfs image as initramfs... [ 1.012177] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.014278] Freeing initrd memory: 8196K [ 1.018621] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.018661] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.018720] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.019162] kvm [1]: IPA Size Limit: 40 bits [ 1.019765] kvm [1]: vgic interrupt IRQ9 [ 1.020246] kvm [1]: VHE mode initialized successfully [ 1.021513] Initialise system trusted keyrings [ 1.021778] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.026810] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.027536] NFS: Registering the id_resolver key type [ 1.027560] Key type id_resolver registered [ 1.027571] Key type id_legacy registered [ 1.027640] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.027657] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.027706] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.039014] NET: Registered protocol family 38 [ 1.039036] Key type asymmetric registered [ 1.039047] Asymmetric key parser 'x509' registered [ 1.039100] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.039345] io scheduler mq-deadline registered [ 1.039380] io scheduler kyber registered [ 1.044192] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.046614] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.046674] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.046726] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.046776] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.046841] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.051705] scrncapt: init (heads:4 wins:6 planes:4) [ 1.051983] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.052802] EINJ: ACPI disabled. [ 1.055644] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.055665] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.055676] tegra-pmc: ### PMC reset level: L1 [ 1.055687] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.055746] tegra-pmc: PMC Prod config success [ 1.060928] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.065670] random: fast init done [ 1.066339] printk: console [ttyTCU0] enabled [ 2.617738] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.622379] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.626829] arm-smmu 10000000.iommu: stage 1 translation [ 2.632591] arm-smmu 10000000.iommu: stage 2 translation [ 2.638118] arm-smmu 10000000.iommu: nested translation [ 2.643469] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.650389] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.660987] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.663782] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.670053] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.677970] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.683128] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.688078] arm-smmu 12000000.iommu: stage 1 translation [ 2.693328] arm-smmu 12000000.iommu: stage 2 translation [ 2.698749] arm-smmu 12000000.iommu: nested translation [ 2.704458] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.711352] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.721746] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.724755] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.731041] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.738755] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.748327] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.751856] tegra_profiler: auth: init [ 2.755865] THERMAL EST: found 3 subdevs [ 2.759103] THERMAL EST num_resources: 0 [ 2.763000] [THERMAL EST subdev 0] [ 2.766593] [THERMAL EST subdev 1] [ 2.769991] [THERMAL EST subdev 2] [ 2.773216] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.779436] THERMAL EST: thz register success. [ 2.783924] THERMAL EST: end of probe, return err: 0 [ 2.789295] nvsciipc: loaded module [ 2.796036] tun: Universal TUN/TAP device driver, 1.6 [ 2.798565] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.804736] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.810301] e1000e: Intel(R) PRO/1000 Network Driver [ 2.815472] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.821551] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.826859] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.833005] PPP generic driver version 2.4.2 [ 2.837358] PPP BSD Compression module registered [ 2.841823] PPP Deflate Compression module registered [ 2.846818] PPP MPPE Compression module registered [ 2.852097] usbcore: registered new interface driver r8152 [ 2.857623] usbcore: registered new interface driver asix [ 2.862666] usbcore: registered new interface driver ax88179_178a [ 2.869062] usbcore: registered new interface driver cdc_ether [ 2.874761] usbcore: registered new interface driver net1080 [ 2.880594] usbcore: registered new interface driver cdc_subset [ 2.886651] usbcore: registered new interface driver zaurus [ 2.892069] usbcore: registered new interface driver cdc_ncm [ 2.898004] usbcore: registered new interface driver aqc111 [ 2.903682] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.909491] ohci-pci: OHCI PCI platform driver [ 2.914059] ohci-platform: OHCI generic platform driver [ 2.919876] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.925980] usbcore: registered new interface driver uas [ 2.930357] usbcore: registered new interface driver usb-storage [ 2.936178] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.942236] mousedev: PS/2 mouse device common for all mice [ 2.947235] usbcore: registered new interface driver xpad [ 2.955168] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.958293] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.965758] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.972485] i2c /dev entries driver [ 2.975933] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.981441] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.986723] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.992129] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.997733] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.003097] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.008728] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.022309] device-mapper: uevent: version 1.0.3 [ 3.022791] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.028738] cpuidle: Initializing cpuidle driver [ 3.032910] sdhci: Secure Digital Host Controller Interface driver [ 3.037851] sdhci: Copyright(c) Pierre Ossman [ 3.041930] Synopsys Designware Multimedia Card Interface Driver [ 3.047859] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.054245] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.054854] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.067039] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.086368] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.095436] vdd-1v0: supplied by regulator-dummy [ 3.100863] vdd-1v8-hs: supplied by regulator-dummy [ 3.105604] vdd-1v8-ls: supplied by regulator-dummy [ 3.110325] vdd-1v8-ao: supplied by regulator-dummy [ 3.114115] vddio-ddr-1v1: supplied by regulator-dummy [ 3.118469] vdd-rtc: supplied by regulator-dummy [ 3.120132] spmic-ldo1: supplied by regulator-dummy [ 3.121309] vdd-ao-3v3: supplied by regulator-dummy [ 3.127337] vddio-emmc-3v3: supplied by regulator-dummy [ 3.133580] spmic-ldo4: supplied by regulator-dummy [ 3.134891] vdd-usb-3v3: supplied by regulator-dummy [ 3.141027] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.147091] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.152557] spmic-ldo8: supplied by vdd-1v8-ls [ 3.153897] gpio-510 (gpio_default): hogged as output/high [ 3.155205] gpio-511 (gpio_default): hogged as output/high [ 3.161019] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.299569] max77686-rtc max77620-rtc: registered as rtc0 [ 3.300526] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.300796] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.012059] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.013197] hid: raw HID events driver (C) Jiri Kosina [ 4.013876] usbcore: registered new interface driver usbhid [ 4.014016] usbhid: USB HID core driver [ 4.015975] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.017248] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.038279] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.112934] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.466 ms) ÿá[ 4.102152] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.102818] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.104358] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.105364] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.107492] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.108131] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.108721] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.110136] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.110504] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.112903] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.118298] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.125252] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.130211] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.137302] denver_knobs_init:MTS_VERSION:55637613 [ 4.149645] t19x_cache tegra-cache: probed [ 4.153284] optee: probing for conduit method. [ 4.154205] optee: revision 3.16 (65cc2218) [ 4.155825] optee: dynamic shared memory is enabled [ 4.157149] optee: initialized driver [ 4.164489] nvpmodel: initialized successfully [ 4.165095] tegra_hv: get_hvd: not initialized yet [ 4.169475] user_ivc_mempool: hypervisor not present [ 4.175676] usbcore: registered new interface driver snd-usb-audio [ 4.181927] u32 classifier [ 4.183153] input device check on [ 4.186801] Actions configured [ 4.190405] Initializing XFRM netlink socket [ 4.195124] NET: Registered protocol family 10 [ 4.202287] Segment Routing with IPv6 [ 4.202555] NET: Registered protocol family 17 [ 4.207354] NET: Registered protocol family 15 [ 4.211484] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.225399] Bluetooth: RFCOMM socket layer initialized [ 4.229850] Bluetooth: RFCOMM ver 1.11 [ 4.233654] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.239549] Bluetooth: HIDP socket layer initialized [ 4.245145] 9pnet: Installing 9P2000 support [ 4.248935] Key type dns_resolver registered [ 4.254224] registered taskstats version 1 [ 4.257393] Loading compiled-in X.509 certificates [ 4.270713] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.273428] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.283810] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.285006] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.293943] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.302357] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.419474] tegra194-pcie 14160000.pcie: Link up [ 4.422408] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.422687] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.422848] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.423128] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.423487] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.423870] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.424337] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.436895] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.437550] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.438075] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.439771] pci 0004:01:00.0: supports D1 D2 [ 4.439955] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.451004] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.451573] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.451885] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.452317] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.452588] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.452767] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.454006] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.461822] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.470521] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.480394] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.485330] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.490864] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.497439] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.507719] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.508081] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.516424] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.524992] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.631341] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.631982] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.632195] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.632376] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.632620] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.632840] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.633201] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.633660] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.650282] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.650613] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.652385] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.653432] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.655175] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.656990] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.657897] pci 0005:00:00.0: Removing from iommu group 7 [ 5.658171] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.690957] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.713659] host1x 13e10000.host1x: initialized [ 5.715579] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.716426] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.717617] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.718295] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.719661] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.720374] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.721364] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.721975] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.724451] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.731580] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.741578] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.748658] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.758285] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.765761] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.775593] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.782323] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.792399] falcon 15340000.vic: Adding to iommu group 17 [ 5.807239] falcon 15340000.vic: initialized [ 5.808486] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.814081] falcon 15380000.nvjpg: initialized [ 5.814700] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.824969] falcon 154c0000.nvenc: initialized [ 5.825646] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.835815] falcon 15a80000.nvenc1: initialized [ 5.836496] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.848043] nvdec 15480000.nvdec: initialized [ 5.848641] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.857901] nvdec 15140000.nvdec1: initialized [ 5.858512] tsec 15500000.tsec: Adding to iommu group 18 [ 5.864230] tsec 15500000.tsec: initialized [ 5.864818] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.872171] tsec 15100000.tsecb: initialized [ 5.876278] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.901277] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.914241] gpio-374 (wifi-enable): hogged as output/high [ 5.914619] gpio-431 (camera-control-output-low): hogged as output/low [ 5.914889] gpio-432 (camera-control-output-low): hogged as output/low [ 5.916998] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.918914] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.919649] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.923785] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.928929] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.934853] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.940869] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.949577] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.955942] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.967808] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.973030] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.978726] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.987531] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.996581] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.004499] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.011816] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.017588] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.027380] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.033432] pva 16000000.pva0: Adding to iommu group 22 [ 6.060089] pva 16000000.pva0: initialized [ 6.065474] pva 16800000.pva1: Adding to iommu group 23 [ 6.075869] pva 16800000.pva1: initialized [ 6.080055] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.092750] nvdla 15880000.nvdla0: initialized [ 6.094038] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.103854] nvdla 158c0000.nvdla1: initialized [ 6.106736] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.107100] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.107736] tegradc 15200000.display: Adding to iommu group 26 [ 6.108339] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.109361] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.109424] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.110009] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.115222] tegradc 15210000.display: Adding to iommu group 26 [ 6.116370] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.116411] tegra_cec 3960000.tegra_cec: probed [ 6.117279] tegradccommon 15200000.display-hub: dma mapping done [ 6.117367] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.119790] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.120219] kfuse 3830000.kfuse: initialized [ 6.120784] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.120794] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.121378] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.122508] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.125032] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.191672] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.200805] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.205284] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.225928] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.226271] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.228624] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.236688] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.245188] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.251598] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.259377] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.266589] usb usb1: Product: xHCI Host Controller [ 6.271741] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.277777] usb usb1: SerialNumber: 3610000.xhci [ 6.283752] hub 1-0:1.0: USB hub found [ 6.286315] hub 1-0:1.0: 4 ports detected [ 6.290959] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.296010] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.303352] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.310976] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.318932] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.326424] usb usb2: Product: xHCI Host Controller [ 6.331406] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.337369] usb usb2: SerialNumber: 3610000.xhci [ 6.342970] hub 2-0:1.0: USB hub found [ 6.345871] hub 2-0:1.0: 4 ports detected [ 6.389918] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.396940] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.398076] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.398316] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.411427] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.412478] tegra194-cpufreq ccplex: probed with BWMGR [ 6.413724] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.414300] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.414883] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.416357] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.424436] tegra194-vi5 15c10000.vi: initialized [ 6.426124] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.426413] generic_infoframe_type: 0x87 [ 6.427599] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.430300] tegradc 15200000.display: DT parsed successfully [ 6.436903] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.442290] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.450176] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.458587] mmc0: CQHCI version 5.10 [ 6.459644] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.459648] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.459652] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.459961] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.459967] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.460310] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.461619] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.461624] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.463908] tegradc 15200000.display: probed [ 6.464587] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.464594] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.464599] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.471444] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.506834] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.515804] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.575704] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.575735] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.576031] Console: switching to colour frame buffer device 240x67 [ 6.577096] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.582612] tegradc 15200000.display: fb registered [ 6.582695] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.609737] mmc0: Command Queue Engine enabled [ 6.614843] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.615084] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.618479] mmc0: periodic cache flush enabled [ 6.624438] nvethernet 2490000.ethernet: Macsec not supported [ 6.625833] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.630295] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.630911] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.635799] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.640430] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.648557] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.666869] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.672682] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.683340] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.696134] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.704515] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.711380] tegra-se-nvhost 15810000.se: initialized [ 6.717450] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.718040] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.723992] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.730217] Extcon AUX1(HDMI) enable [ 6.730512] tegradc 15210000.display: disp1 connected to head1->sor [ 6.738082] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.743768] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.747999] tegra-se-nvhost 15820000.se: initialized [ 6.753917] tegradc 15210000.display: DT parsed successfully [ 6.761911] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.767210] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.772595] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.777728] tegradc 15210000.display: vblank syncpt # 13 for dc 1 [ 6.784525] tegra-se-nvhost 15830000.se: initialized [ 6.792235] tegradc 15210000.display: vpulse3 syncpt # 14 for dc 1 [ 6.793541] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.793547] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.793551] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.793555] usb 1-2: Manufacturer: Generic [ 6.795466] hub 1-2:1.0: USB hub found [ 6.796546] hub 1-2:1.0: 4 ports detected [ 6.799370] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.811609] tegradc 15210000.display: probed [ 6.815814] tegra-se-nvhost 15840000.se: Adding to iommu group 31 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.864784] tegradc 15210000.display: fb registered [ 6.864896] tegradc 15200000.display: blank - powerdown [ 6.865428] tegra-se-nvhost 15840000.se: initialized [ 6.867180] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.868313] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.868318] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.868326] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.868895] tegra_actmon d230000.actmon: in actmon_register()... [ 6.869053] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.869405] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.869724] hvc_sysfs: hypervisor is not present [ 6.876153] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.896864] ALSA device list: [ 6.896870] No soundcards found. [ 6.900392] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.900398] Extcon AUX1(HDMI) disable [ 6.912221] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.912251] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.912258] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.912262] usb 2-3: Manufacturer: Generic [ 6.923068] hub 2-3:1.0: USB hub found [ 6.923669] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.924525] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.924965] hub 2-3:1.0: 4 ports detected [ 6.938043] tegradc 15200000.display: unblank [ 6.939396] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.939596] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.945508] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.947398] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.951392] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.951396] Extcon AUX1(HDMI) enable [ 6.964151] tegradc 15200000.display: sync windows ret = 247 [ 7.031331] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.067571] tegradc 15210000.display: blank - powerdown [ 7.072461] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.072466] Extcon DP: HPD disabled [ 7.072470] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.072482] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.096994] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.104060] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.105376] Freeing unused kernel memory: 3968K [ 7.111421] Extcon HDMI: HPD enabled [ 7.111428] tegradc 15200000.display: hdmi: plugged [ 7.124755] Run /init as init process [ 7.135362] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.186045] Root device found: mmcblk0p1 [ 7.189512] Found dev node: /dev/mmcblk0p1 [ 7.199889] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.201333] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.216518] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.217967] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.219397] usb 1-3: Product: Bluetooth Radio [ 7.220687] usb 1-3: Manufacturer: Realtek [ 7.221952] usb 1-3: SerialNumber: 00e04c000001 [ 7.228387] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.233562] Rootfs mounted over mmcblk0p1 [ 7.270218] Switching from initrd to actual rootfs [ 7.422064] systemd[1]: System time before build time, advancing clock. [ 7.501572] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.506489] systemd[1]: Detected architecture arm64. [ 7.563558] systemd[1]: Set hostname to . [ 7.745093] systemd-sysv-generator[253]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.102390] random: systemd: uninitialized urandom read (16 bytes read) [ 8.104253] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.105890] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.112049] systemd[1]: Created slice system-modprobe.slice. [ 8.115485] random: systemd: uninitialized urandom read (16 bytes read) [ 8.118151] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.121324] random: systemd: uninitialized urandom read (16 bytes read) [ 8.124194] systemd[1]: Created slice User and Session Slice. [ 8.127769] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.132042] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.135520] systemd[1]: Reached target User and Group Name Lookups. [ 8.138750] systemd[1]: Reached target Slices. [ 8.141909] systemd[1]: Reached target Swap. [ 8.146071] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.149867] systemd[1]: Listening on Syslog Socket. [ 8.153574] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.158623] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.164652] systemd[1]: Listening on Journal Audit Socket. [ 8.168537] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.172569] systemd[1]: Listening on Journal Socket. [ 8.176459] systemd[1]: Listening on udev Control Socket. [ 8.180048] systemd[1]: Listening on udev Kernel Socket. [ 8.188908] systemd[1]: Mounting Huge Pages File System... [ 8.197904] systemd[1]: Mounting POSIX Message Queue File System... [ 8.206417] systemd[1]: Mounting RPC Pipe File System... [ 8.215343] systemd[1]: Mounting Kernel Debug File System... [ 8.224351] systemd[1]: Mounting Kernel Trace File System... [ 8.234813] systemd[1]: Starting Journal Service... [ 8.244405] systemd[1]: Starting Set the console keyboard layout... [ 8.253282] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.256955] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.263915] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.273678] systemd[1]: Started Nameserver information manager. [ 8.278448] systemd[1]: Reached target Network (Pre). [ 8.285907] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.286228] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.296941] systemd[1]: Starting Load Kernel Modules... [ 8.305051] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.313344] systemd[1]: Starting udev Coldplug all Devices... [ 8.324980] systemd[1]: Mounted Huge Pages File System. [ 8.329010] systemd[1]: Mounted POSIX Message Queue File System. [ 8.333061] systemd[1]: Mounted RPC Pipe File System. [ 8.336589] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.336928] systemd[1]: Mounted Kernel Debug File System. [ 8.339112] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.343326] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.344965] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.346454] systemd[1]: Mounted Kernel Trace File System. [ 8.346487] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.349396] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.353278] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.354898] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.356015] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.356626] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.365643] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.376888] systemd[1]: nvfb-udev.service: Succeeded. [ 8.381394] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.394082] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.402299] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.404156] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.415239] systemd[1]: Starting Load/Save Random Seed... [ 8.424757] systemd[1]: Starting Create System Users... [ 8.471042] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.471042] [ 8.479583] systemd[1]: Finished Create System Users. [ 8.491465] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.508872] systemd[1]: Finished Set the console keyboard layout. [ 8.517369] systemd[1]: Finished Load Kernel Modules. [ 8.522006] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.529101] systemd[1]: Mounting Kernel Configuration File System... [ 8.538111] systemd[1]: Started OP-TEE Client Supplicant. [ 8.547206] systemd[1]: Starting Apply Kernel Variables... [ 8.559905] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.564464] systemd[1]: Mounted Kernel Configuration File System. [ 8.568289] systemd[1]: Reached target Local File Systems (Pre). [ 8.571824] systemd[1]: Reached target Local File Systems. [ 8.576620] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 8.583363] systemd[1]: Starting Enable support for additional executable binary formats... [ 9.519315] random: crng init done [ 9.520701] random: 7 urandom warning(s) missed due to ratelimiting [ 9.909463] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.917646] imx219 9-0010: board setup failed [ 9.918926] imx219: probe of 9-0010 failed with error -121 [ 9.956960] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.963461] imx219 10-0010: board setup failed [ 9.963554] imx219: probe of 10-0010 failed with error -121 [ 10.020439] hot-surface-alert cooling state: 0 -> 1 [ 10.876737] using random self ethernet address [ 10.883341] using random host ethernet address [ 11.678542] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.680274] Creating 1 MTD partitions on "spi6.0": [ 11.681904] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.393854] using random self ethernet address [ 12.395601] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.938971] nvidia: loading out-of-tree module taints kernel. [ 59.120920] watchdog: watchdog0: watchdog did not stop! [ 59.578792] Trying to unregister non-registered hwtime source [ 62.641896] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.643520] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 65000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.310] I> sdmmc DDR50 mode [0001.328] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.345] W> Cannot find any partition table for 00000003 [0001.346] > PARTITION_MANAGER: Failed to publish partition. [0001.362] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.363] I> Active Boot chain : 0 [0002.034] I> Relocating BR-BCT [0002.036] > DEVICE_PROD: device prod is not initialized. [0002.342] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.343] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.343] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.344] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.344] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.344] I> dram_block larger than 80000000 [0002.347] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.358] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.362] I> found decompressor handler: lz4 [0002.591] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.593] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.212] I> Welcome to NVDisp-Init [0003.212] I> NVDisp-Init version: t194-f9ecfedc [0003.213] I> CPU-BL Params @ 0xca020000 [0003.213] I> 0) Base:0x00000000 Size:0x00000000 [0003.213] I> 1) Base:0xc8300000 Size:0x00100000 [0003.214] I> 2) Base:0xc9800000 Size:0x00200000 [0003.214] I> 3) Base:0xc8600000 Size:0x00200000 [0003.217] I> 4) Base:0xc8200000 Size:0x00100000 [0003.221] I> 5) Base:0xc8100000 Size:0x00100000 [0003.225] I> 6) Base:0xc9400000 Size:0x00400000 [0003.230] I> 7) Base:0xc9000000 Size:0x00400000 [0003.234] I> 8) Base:0xc8000000 Size:0x00100000 [0003.239] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.243] I> 10) Base:0xca800000 Size:0x00800000 [0003.248] I> 11) Base:0x40000000 Size:0x00040000 [0003.252] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.257] I> 13) Base:0x40046000 Size:0x00002000 [0003.261] I> 14) Base:0x40048000 Size:0x00002000 [0003.266] I> 15) Base:0xaf000000 Size:0x00004000 [0003.270] I> 16) Base:0x4004a000 Size:0x00002000 [0003.275] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.279] I> 18) Base:0x4004c000 Size:0x00002000 [0003.283] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.288] I> 20) Base:0x4004e000 Size:0x00002000 [0003.292] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.297] I> 22) Base:0x00000000 Size:0x00000000 [0003.301] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.306] I> 24) Base:0xcc000000 Size:0x02000000 [0003.310] I> 25) Base:0x40050000 Size:0x00002000 [0003.315] I> 26) Base:0x40040000 Size:0x00006000 [0003.319] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.324] I> 28) Base:0xc8400000 Size:0x00200000 [0003.328] I> 29) Base:0xc8800000 Size:0x00400000 [0003.333] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.337] I> 31) Base:0x00000000 Size:0x00000000 [0003.341] I> 32) Base:0xf8000000 Size:0x08000000 [0003.346] I> 33) Base:0xce000000 Size:0x2a000000 [0003.350] I> 34) Base:0xcb000000 Size:0x01000000 [0003.355] I> 35) Base:0xae000000 Size:0x01000000 [0003.359] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.364] I> 37) Base:0xca000000 Size:0x00800000 [0003.368] I> 38) Base:0x80000000 Size:0x20000000 [0003.373] I> 39) Base:0xb0000000 Size:0x08000000 [0003.377] I> 40) Base:0x00000000 Size:0x00000000 [0003.382] I> 41) Base:0x00000000 Size:0x00000000 [0003.386] I> 42) Base:0x00000000 Size:0x00000000 [0003.391] I> 43) Base:0x00000000 Size:0x00000000 [0003.395] I> 44) Base:0x00000000 Size:0x00000000 [0003.399] I> 45) Base:0x00000000 Size:0x00000000 [0003.404] GIC-SPI Target CPU: 0 [0003.407] Interrupts Init done [0003.410] calling constructors [0003.413] initializing heap [0003.415] I> Heap: [0xa0960000 ... 0xadf00000] [0003.420] initializing threads [0003.422] initializing timers [0003.425] creating bootstrap completion thread [0003.430] top of bootstrap2() [0003.432] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.437] initializing platform [0003.440] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.445] W> device prod register failed [0003.449] I> Bl_dtb @0xadf00000 [0003.452] I> gpio framework initialized [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.471] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.476] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.494] I> Boot-device: QSPI [0003.496] I> Boot_device: QSPI_FLASH instance: 0 [0003.501] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.511] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.519] I> QSPI source rate = 204000 Khz [0003.522] I> Requested rate for QSPI clock = 34000 Khz [0003.527] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.532] I> tx_clk_tap_delay : 0 [0003.535] I> rx_clk_tap_delay : 16 [0003.538] I> QSPI Flash Size = 32 MB [0003.546] I> Qspi initialized successfully [0003.546] I> qspi flash-0 params source = boot args [0003.551] W> No board IDs available [0003.553] E> Failed to get board id info! [0003.559] I> sdmmc-3 params source = safe params [0003.566] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.568] W> Cannot find any partition table for 00000003 [0003.572] E> Failed to publish 00000003 [0003.577] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.609] I> regulator 'vdd-hdmi-5v0' already enabled [0003.609] I> hdmi cable connected [0003.616] W> set volts not configured for 'vdd-1v0' [0003.623] W> set volts not configured for 'vdd-1v8-hs' [0003.623] I> retrieved tmds range from prod_list_hdmi_soc [0003.630] E> invalid display type [0003.632] E> cannot find any other nvdisp nodes [0003.648] I> edid read success [0003.661] I> edid read success [0003.661] I> width = 640, height = 480, frequency = 25174825 [0003.661] I> width = 1920, height = 1080, frequency = 148500000 [0003.662] I> width = 1280, height = 768, frequency = 79500000 [0003.662] I> width = 1360, height = 768, frequency = 85500000 [0003.663] I> width = 720, height = 480, frequency = 26973026 [0003.667] I> width = 720, height = 576, frequency = 26973026 [0003.672] I> width = 1280, height = 720, frequency = 74175824 [0003.678] I> width = 1280, height = 720, frequency = 74175824 [0003.683] I> width = 1920, height = 1080, frequency = 148351648 [0003.689] I> width = 1920, height = 1080, frequency = 148351648 [0003.695] I> width = 720, height = 480, frequency = 26973026 [0003.700] I> width = 720, height = 576, frequency = 26973026 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 3840, height = 2160, frequency = 296703296 [0003.723] I> width = 3840, height = 2160, frequency = 296703296 [0003.729] I> width = 4096, height = 2160, frequency = 296703296 [0003.735] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.746] I> hdmi_enable, starting HDMI initialisation [0003.751] I> hdmi_enable, HDMI initialisation complete [0003.760] initializing target [0003.761] calling apps_init() [0003.762] starting app kernel_boot_app [0003.763] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000090974000-0x00000000a0974000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000631] Console: colour dummy device 80x25 [ 0.002172] printk: console [tty0] enabled [ 0.002232] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002269] pid_max: default: 32768 minimum: 301 [ 0.002475] LSM: Security Framework initializing [ 0.002551] Yama: becoming mindful. [ 0.002595] SELinux: Initializing. [ 0.002748] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002810] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005755] rcu: Hierarchical SRCU implementation. [ 0.006057] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006959] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007025] DTB Build time: Aug 10 2022 20:31:49 [ 0.009989] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010268] Remapping and enabling EFI services. [ 0.012317] smp: Bringing up secondary CPUs ... [ 0.042304] Detected PIPT I-cache on CPU1 [ 0.042400] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072655] Detected PIPT I-cache on CPU2 [ 0.072732] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102196] Detected PIPT I-cache on CPU3 [ 0.102323] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131959] Detected PIPT I-cache on CPU4 [ 0.132061] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161703] Detected PIPT I-cache on CPU5 [ 0.161794] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162114] smp: Brought up 1 node, 6 CPUs [ 0.162486] SMP: Total of 6 processors activated. [ 0.162534] CPU features: detected: Privileged Access Never [ 0.162565] CPU features: detected: LSE atomic instructions [ 0.162590] CPU features: detected: User Access Override [ 0.162614] CPU features: detected: 32-bit EL0 Support [ 0.162635] CPU features: detected: RAS Extension Support [ 0.162656] CPU features: detected: CRC32 instructions [ 0.162678] CPU features: detected: 32-bit EL1 Support [ 0.233791] CPU: All CPU(s) started at EL2 [ 0.239490] devtmpfs: initialized [ 0.294333] Registered cp15_barrier emulation handler [ 0.294481] Registered setend emulation handler [ 0.294507] KASLR enabled [ 0.294818] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.294848] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.296111] pinctrl core: initialized pinctrl subsystem [ 0.297166] SMBIOS 3.0.0 present. [ 0.297200] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.298030] NET: Registered protocol family 16 [ 0.300118] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.300651] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.301437] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.301514] audit: initializing netlink subsys (disabled) [ 0.301836] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.302337] thermal_sys: Registered thermal governor 'step_wise' [ 0.302346] thermal_sys: Registered thermal governor 'power_allocator' [ 0.302366] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.304457] cpuidle: using governor menu [ 0.305015] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.305642] ASID allocator initialised with 32768 entries [ 0.305937] Serial: AMBA PL011 UART driver [ 0.309550] Tegra reboot handler registered. [ 0.375615] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375764] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.375994] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376038] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376171] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376214] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376331] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.376372] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376534] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376576] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379203] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379245] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.379300] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379328] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379376] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379402] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379427] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379452] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379476] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379501] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379525] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379549] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379574] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379598] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379625] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379649] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379673] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.379768] mc-err: mcerr ops are set to t19x [ 0.392087] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392111] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.392123] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392135] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.398903] ACPI: Interpreter disabled. [ 0.400121] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.401540] iommu: Default domain type: Translated [ 0.401607] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.401974] SCSI subsystem initialized [ 0.402210] usbcore: registered new interface driver usbfs [ 0.402252] usbcore: registered new interface driver hub [ 0.402286] usbcore: registered new device driver usb [ 0.402693] mc: Linux media interface: v0.10 [ 0.402724] videodev: Linux video capture interface: v2.00 [ 0.403056] pps_core: LinuxPPS API ver. 1 registered [ 0.403068] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403113] PTP clock support registered [ 0.403337] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.403664] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.403752] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.404407] Registered efivars operations [ 0.410291] FPGA manager framework [ 0.410425] Advanced Linux Sound Architecture Driver Initialized. [ 0.411051] Bluetooth: Core ver 2.22 [ 0.411089] NET: Registered protocol family 31 [ 0.411119] Bluetooth: HCI device and connection manager initialized [ 0.411135] Bluetooth: HCI socket layer initialized [ 0.411151] Bluetooth: L2CAP socket layer initialized [ 0.411178] Bluetooth: SCO socket layer initialized [ 0.412694] camchar: rtcpu character device driver loaded [ 0.413707] clocksource: Switched to clocksource arch_sys_counter [ 0.707914] VFS: Disk quotas dquot_6.6.0 [ 0.708010] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.708313] pnp: PnP ACPI: disabled [ 0.720058] la/ptsa driver initialized. [ 0.720198] NET: Registered protocol family 2 [ 0.720393] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.726231] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.726321] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.726625] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.727072] TCP: Hash tables configured (established 65536 bind 65536) [ 0.727222] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.727322] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.727542] NET: Registered protocol family 1 [ 0.728163] RPC: Registered named UNIX socket transport module. [ 0.728178] RPC: Registered udp transport module. [ 0.728187] RPC: Registered tcp transport module. [ 0.728196] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.728218] PCI: CLS 0 bytes, default 64 [ 0.728422] Trying to unpack rootfs image as initramfs... [ 0.912904] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.915109] Freeing initrd memory: 8196K [ 0.919397] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.919471] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.919531] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.919972] kvm [1]: IPA Size Limit: 40 bits [ 0.920522] kvm [1]: vgic interrupt IRQ9 [ 0.921212] kvm [1]: VHE mode initialized successfully [ 0.922770] Initialise system trusted keyrings [ 0.923071] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.928911] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.929832] NFS: Registering the id_resolver key type [ 0.929864] Key type id_resolver registered [ 0.929879] Key type id_legacy registered [ 0.929967] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.929992] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.930027] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.939903] NET: Registered protocol family 38 [ 0.939926] Key type asymmetric registered [ 0.939971] Asymmetric key parser 'x509' registered [ 0.940022] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.940248] io scheduler mq-deadline registered [ 0.940266] io scheduler kyber registered [ 0.946626] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.949902] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.949986] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.950061] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.950174] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.950286] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.956438] scrncapt: init (heads:4 wins:6 planes:4) [ 0.956669] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.957614] EINJ: ACPI disabled. [ 0.961168] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.961192] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.961206] tegra-pmc: ### PMC reset level: L1 [ 0.961219] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.961266] tegra-pmc: PMC Prod config success [ 0.966721] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.971426] random: fast init done [ 0.971569] printk: console [ttyTCU0] enabled [ 2.524290] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.528821] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.533460] arm-smmu 10000000.iommu: stage 1 translation [ 2.538844] arm-smmu 10000000.iommu: stage 2 translation [ 2.544072] arm-smmu 10000000.iommu: nested translation [ 2.549411] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.556587] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.567421] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.569968] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.576522] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.584040] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.589307] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.594033] arm-smmu 12000000.iommu: stage 1 translation [ 2.599798] arm-smmu 12000000.iommu: stage 2 translation [ 2.605241] arm-smmu 12000000.iommu: nested translation [ 2.610413] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.617574] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.628387] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.630695] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.637253] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.644972] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.654429] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.657927] tegra_profiler: auth: init [ 2.661943] THERMAL EST: found 3 subdevs [ 2.665570] THERMAL EST num_resources: 0 [ 2.669196] [THERMAL EST subdev 0] [ 2.672802] [THERMAL EST subdev 1] [ 2.675932] [THERMAL EST subdev 2] [ 2.679435] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.686007] THERMAL EST: thz register success. [ 2.689873] THERMAL EST: end of probe, return err: 0 [ 2.695482] nvsciipc: loaded module [ 2.702371] tun: Universal TUN/TAP device driver, 1.6 [ 2.704738] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.710967] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.716748] e1000e: Intel(R) PRO/1000 Network Driver [ 2.721455] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.727781] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.732796] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.739332] PPP generic driver version 2.4.2 [ 2.743235] PPP BSD Compression module registered [ 2.747784] PPP Deflate Compression module registered [ 2.753023] PPP MPPE Compression module registered [ 2.758035] usbcore: registered new interface driver r8152 [ 2.763797] usbcore: registered new interface driver asix [ 2.769157] usbcore: registered new interface driver ax88179_178a [ 2.775007] usbcore: registered new interface driver cdc_ether [ 2.780950] usbcore: registered new interface driver net1080 [ 2.786580] usbcore: registered new interface driver cdc_subset [ 2.792845] usbcore: registered new interface driver zaurus [ 2.798554] usbcore: registered new interface driver cdc_ncm [ 2.804221] usbcore: registered new interface driver aqc111 [ 2.809970] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.815944] ohci-pci: OHCI PCI platform driver [ 2.820012] ohci-platform: OHCI generic platform driver [ 2.825942] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.832368] usbcore: registered new interface driver uas [ 2.836539] usbcore: registered new interface driver usb-storage [ 2.842683] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.848740] mousedev: PS/2 mouse device common for all mice [ 2.853769] usbcore: registered new interface driver xpad [ 2.861458] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.864444] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.872230] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.878586] i2c /dev entries driver [ 2.881863] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.887585] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.893243] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.898718] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.904000] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.909471] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.914860] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.928412] device-mapper: uevent: version 1.0.3 [ 2.928889] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.935391] cpuidle: Initializing cpuidle driver [ 2.939145] sdhci: Secure Digital Host Controller Interface driver [ 2.943777] sdhci: Copyright(c) Pierre Ossman [ 2.948131] Synopsys Designware Multimedia Card Interface Driver [ 2.954339] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.960113] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.960922] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.973413] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.002194] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.012459] vdd-1v0: supplied by regulator-dummy [ 3.018182] vdd-1v8-hs: supplied by regulator-dummy [ 3.023303] vdd-1v8-ls: supplied by regulator-dummy [ 3.028144] vdd-1v8-ao: supplied by regulator-dummy [ 3.032118] vddio-ddr-1v1: supplied by regulator-dummy [ 3.036625] vdd-rtc: supplied by regulator-dummy [ 3.038411] spmic-ldo1: supplied by regulator-dummy [ 3.039698] vdd-ao-3v3: supplied by regulator-dummy [ 3.046005] vddio-emmc-3v3: supplied by regulator-dummy [ 3.052304] spmic-ldo4: supplied by regulator-dummy [ 3.053536] vdd-usb-3v3: supplied by regulator-dummy [ 3.059863] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.066050] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.071752] spmic-ldo8: supplied by vdd-1v8-ls [ 3.073352] gpio-510 (gpio_default): hogged as output/high [ 3.074745] gpio-511 (gpio_default): hogged as output/high [ 3.077749] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.213961] max77686-rtc max77620-rtc: registered as rtc0 [ 3.215324] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.215692] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.044975] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.046419] hid: raw HID events driver (C) Jiri Kosina [ 4.047320] usbcore: registered new interface driver usbhid [ 4.047506] usbhid: USB HID core driver [ 4.049764] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.050954] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.824926] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.899193] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 75.074 ms) ÿá[ 4.135091] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.135690] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.136744] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.137492] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.139401] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.140049] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.140605] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.141881] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.142182] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.144096] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.151395] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.157893] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.162452] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.168694] denver_knobs_init:MTS_VERSION:55637613 [ 4.181996] t19x_cache tegra-cache: probed [ 4.186283] optee: probing for conduit method. [ 4.187167] optee: revision 3.16 (65cc2218) [ 4.188133] optee: dynamic shared memory is enabled [ 4.189830] optee: initialized driver [ 4.197324] nvpmodel: initialized successfully [ 4.198052] tegra_hv: get_hvd: not initialized yet [ 4.202276] user_ivc_mempool: hypervisor not present [ 4.208066] usbcore: registered new interface driver snd-usb-audio [ 4.214773] u32 classifier [ 4.216043] input device check on [ 4.219758] Actions configured [ 4.223286] Initializing XFRM netlink socket [ 4.228176] NET: Registered protocol family 10 [ 4.234741] Segment Routing with IPv6 [ 4.235396] NET: Registered protocol family 17 [ 4.239678] NET: Registered protocol family 15 [ 4.244353] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.258070] Bluetooth: RFCOMM socket layer initialized [ 4.262616] Bluetooth: RFCOMM ver 1.11 [ 4.266267] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.272346] Bluetooth: HIDP socket layer initialized [ 4.277989] 9pnet: Installing 9P2000 support [ 4.281495] Key type dns_resolver registered [ 4.287114] registered taskstats version 1 [ 4.290272] Loading compiled-in X.509 certificates [ 4.301237] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.305844] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.315999] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.318188] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.326460] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.335175] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.449715] tegra194-pcie 14160000.pcie: Link up [ 4.452319] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.452522] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.452668] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.452923] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.453123] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.453483] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.453949] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.464241] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.464821] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.465246] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.466900] pci 0004:01:00.0: supports D1 D2 [ 4.467069] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.475482] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.475778] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.475999] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.476421] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.476665] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.478459] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.484544] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.491887] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.500172] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.510181] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.515127] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.520630] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.527304] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.535865] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.538318] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.546580] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.555056] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.657868] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.658522] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.658774] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.658925] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.659160] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.659397] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.659751] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.660269] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.678095] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.678522] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.680112] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.681164] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.682550] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.684029] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.684863] pci 0005:00:00.0: Removing from iommu group 7 [ 5.685167] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.715783] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.736829] host1x 13e10000.host1x: initialized [ 5.738556] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.739349] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.740409] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.741066] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.742334] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.742990] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.743918] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.744496] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.751181] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.758243] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.767987] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.775150] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.785047] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.791731] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.802022] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.808938] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.818892] falcon 15340000.vic: Adding to iommu group 17 [ 5.833443] falcon 15340000.vic: initialized [ 5.834610] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.840268] falcon 15380000.nvjpg: initialized [ 5.841055] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.851143] falcon 154c0000.nvenc: initialized [ 5.851730] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.861521] falcon 15a80000.nvenc1: initialized [ 5.862202] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.874387] nvdec 15480000.nvdec: initialized [ 5.874974] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.884510] nvdec 15140000.nvdec1: initialized [ 5.885017] tsec 15500000.tsec: Adding to iommu group 18 [ 5.890529] tsec 15500000.tsec: initialized [ 5.891024] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.898455] tsec 15100000.tsecb: initialized [ 5.902022] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.932557] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.946526] gpio-374 (wifi-enable): hogged as output/high [ 5.946950] gpio-431 (camera-control-output-low): hogged as output/low [ 5.947272] gpio-432 (camera-control-output-low): hogged as output/low [ 5.948989] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.951001] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.951598] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.953012] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.955531] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.961135] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.966801] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.975396] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.982494] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.993852] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.999297] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.005139] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.013760] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.023236] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.030653] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.037955] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.044494] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.053885] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.060259] pva 16000000.pva0: Adding to iommu group 22 [ 6.086161] pva 16000000.pva0: initialized [ 6.090833] pva 16800000.pva1: Adding to iommu group 23 [ 6.109089] pva 16800000.pva1: initialized [ 6.113133] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.125899] nvdla 15880000.nvdla0: initialized [ 6.127165] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.135899] nvdla 158c0000.nvdla1: initialized [ 6.138697] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.139021] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.139359] tegradccommon 15200000.display-hub: dma mapping done [ 6.139656] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.139938] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.140525] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.140716] tegradc 15200000.display: Adding to iommu group 26 [ 6.143854] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.148995] tegradc 15210000.display: Adding to iommu group 26 [ 6.149074] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.149201] generic_infoframe_type: 0x87 [ 6.149310] tegradc 15200000.display: DT parsed successfully [ 6.149407] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.149749] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.179467] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.185160] tegra_cec 3960000.tegra_cec: probed [ 6.186223] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.193525] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.193534] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.204532] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.214403] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.220241] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.227168] kfuse 3830000.kfuse: initialized [ 6.243849] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.244503] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.261188] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.268025] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.268592] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.280801] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.281773] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.289960] tegradc 15210000.display: disp0 connected to head1->sor [ 6.298451] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.303445] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.309571] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.315681] tegradc 15210000.display: DT parsed successfully [ 6.325827] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.329963] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.344675] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.364443] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.364838] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.367525] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.376137] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.384620] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.391378] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.398854] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.406043] usb usb1: Product: xHCI Host Controller [ 6.411173] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.417174] usb usb1: SerialNumber: 3610000.xhci [ 6.423134] hub 1-0:1.0: USB hub found [ 6.425780] hub 1-0:1.0: 4 ports detected [ 6.430362] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.435451] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.443034] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.450589] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.458592] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.465570] usb usb2: Product: xHCI Host Controller [ 6.470807] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.477022] usb usb2: SerialNumber: 3610000.xhci [ 6.482253] hub 2-0:1.0: USB hub found [ 6.485467] hub 2-0:1.0: 4 ports detected [ 6.524761] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.531081] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.532287] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.532468] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.545723] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1904000 KHz, changing to: 1907200 KHz [ 6.546765] tegra194-cpufreq ccplex: probed with BWMGR [ 6.548144] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.548854] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.549390] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.550716] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.560472] mmc0: CQHCI version 5.10 [ 6.562039] tegra194-vi5 15c10000.vi: initialized [ 6.563639] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.565046] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.569404] generic_infoframe_type: 0x87 [ 6.575874] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.579504] tegradc 15200000.display: DT parsed successfully [ 6.587392] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.593150] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.599430] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.601681] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.608078] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.614226] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.622192] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.630506] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.636868] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.649745] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.652112] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.659282] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.659289] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.660542] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.665947] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.679103] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.685613] nvethernet 2490000.ethernet: Macsec not supported [ 6.686516] mmc0: Command Queue Engine enabled [ 6.686885] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.688077] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.688193] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.688300] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.689281] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.690884] tegra-se-nvhost 15810000.se: initialized [ 6.696095] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.696132] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.696571] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.697309] tegra-se-nvhost 15820000.se: initialized [ 6.699320] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.699366] mmc0: periodic cache flush enabled [ 6.699382] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.699786] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.700412] tegra-se-nvhost 15830000.se: initialized [ 6.701776] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.701805] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.702222] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.702872] tegra-se-nvhost 15840000.se: initialized [ 6.704825] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.706440] tegra_actmon d230000.actmon: in actmon_register()... [ 6.706592] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.706929] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.707479] hvc_sysfs: hypervisor is not present [ 6.710384] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.736488] ALSA device list: [ 6.747103] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.747108] ************************************** [ 6.747110] CPU:0, Error:cbb-noc [ 6.747113] Error Logger : 0 [ 6.747121] ErrLog0 : 0x80030000 [ 6.747125] Transaction Type : RD - Read, Incrementing [ 6.747127] Error Code : SLV [ 6.747130] Error Source : Target [ 6.747133] Error Description : Target error detected by CBB slave [ 6.747142] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.747157] Packet header Lock : 0 [ 6.747160] Packet header Len1 : 3 [ 6.747180] NOC protocol version : version >= 2.7 [ 6.747183] ErrLog1 : 0x352424 [ 6.747190] ErrLog2 : 0x0 [ 6.748271] No soundcards found. [ 6.748506] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.754284] RouteId : 0x352424 [ 6.754288] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.754291] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.754294] TargSubRange : 18 [ 6.754296] SeqId : 0 [ 6.754299] ErrLog3 : 0x4045c [ 6.754302] ErrLog4 : 0x0 [ 6.754306] Address accessed : 0x15b4045c [ 6.754308] ErrLog5 : 0x909f851 [ 6.754311] Non-Modify : 0x1 [ 6.754314] AXI ID : 0x12 [ 6.754336] Master ID : CCPLEX [ 6.992653] Security Group(GRPSEC): 0x7e [ 6.992658] Cache : 0x1 -- Bufferable [ 6.992662] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.992665] FALCONSEC : 0x0 [ 6.992673] Virtual Queuing Channel(VQC): 0x0 [ 7.015734] ************************************** [ 7.015789] ------------[ cut here ]------------ [ 7.025012] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.031574] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.036827] Modules linked in: [ 7.039806] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 7.046446] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.058958] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.065020] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.069460] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.074183] sp : ffff800010003de0 [ 7.077859] x29: ffff800010003de0 x28: 0000000000000001 [ 7.083282] x27: 0000000000000005 x26: ffffab6ea41c3f58 [ 7.088446] x25: ffffab6ea4b1ce10 x24: 0000000000000001 [ 7.093886] x23: ffffab6ea44b7000 x22: ffffab6ea493ea00 [ 7.099208] x21: 000000000000000f x20: ffff0013c0e66f80 [ 7.104980] x19: ffffab6ea493ea00 x18: 0000000000000010 [ 7.110147] x17: ffffab6ea426d008 x16: 00000000134c32e4 [ 7.115741] x15: ffffab6ea47b2bf0 x14: 0720072007200720 [ 7.121253] x13: 0720072007200720 x12: 0720072007200720 [ 7.126766] x11: 0720072007200720 x10: 0720072007200720 [ 7.132022] x9 : ffff800010003cf0 x8 : 2a2a2a2a2a2a2a2a [ 7.137533] x7 : 2a2a2a2a2a2a2a2a x6 : 000000002a6af221 [ 7.143303] x5 : 000000000000000c x4 : 00000000fffff2bd [ 7.148729] x3 : 00000000ffffffff x2 : ffffab6ea2c5e090 [ 7.154071] x1 : ffffab6ea47b2680 x0 : 0000000100010001 [ 7.159403] Call trace: [ 7.161859] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.166145] __handle_irq_event_percpu+0x68/0x2a0 [ 7.170693] handle_irq_event_percpu+0x40/0xa0 [ 7.174897] handle_irq_event+0x50/0xf0 [ 7.178660] handle_fasteoi_irq+0xc0/0x170 [ 7.182686] generic_handle_irq+0x40/0x60 [ 7.186984] __handle_domain_irq+0x70/0xd0 [ 7.191169] efi_header_end+0xb0/0xf0 [ 7.194410] el1_irq+0xd0/0x180 [ 7.197644] cpuidle_enter_state+0xb8/0x410 [ 7.201584] cpuidle_enter+0x40/0x60 [ 7.205085] call_cpuidle+0x44/0x80 [ 7.208586] do_idle+0x208/0x270 [ 7.212255] cpu_startup_entry+0x2c/0x70 [ 7.215761] rest_init+0xdc/0xe8 [ 7.219275] arch_call_rest_init+0x18/0x20 [ 7.223199] start_kernel+0x514/0x54c [ 7.226788] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.233000] ---[ end trace b9b85043b81cca5a ]--- [ 7.237717] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.245244] SMP: stopping secondary CPUs [ 7.248859] Kernel Offset: 0x2b6e92aa0000 from 0xffff800010000000 [ 7.255217] PHYS_OFFSET: 0xffffffed40000000 [ 7.259334] CPU features: 0x8240002,03802a30 [ 7.263533] Memory Limit: none [ 7.266691] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäalÿâadc initialized ÿä ÿâfmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu ÿâclk_dt_late initialized ÿäAÿânoc_late initialized pm_post initialized dbells initialized ÿäug ÿâdmce initialized ÿä1ÿâcvc initialized ÿä1 03:23:20 Uÿâavfs_clk_mach_post initialized ÿäTC 20ÿâavfs_clk_platform_post initialized ÿä22ÿâcvc_late initialized regulator_post initialized ÿä aarcÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäh64 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initializedentering main console loop ] bpmp: init complete ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.418] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.636] I> edid read success [0003.648] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.649] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.650] I> width = 1360, height = 768, frequency = 85500000 [0003.650] I> width = 720, height = 480, frequency = 26973026 [0003.654] I> width = 720, height = 576, frequency = 26973026 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.688] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.748] calling apps_init() [0003.749] starting app kernel_boot_app [0003.750] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000844] Console: colour dummy device 80x25 [ 0.002372] printk: console [tty0] enabled [ 0.002434] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002480] pid_max: default: 32768 minimum: 301 [ 0.002710] LSM: Security Framework initializing [ 0.002771] Yama: becoming mindful. [ 0.002814] SELinux: Initializing. [ 0.003009] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003050] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006055] rcu: Hierarchical SRCU implementation. [ 0.006330] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007218] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007273] DTB Build time: Aug 10 2022 20:31:49 [ 0.010281] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010547] Remapping and enabling EFI services. [ 0.012703] smp: Bringing up secondary CPUs ... [ 0.041883] Detected PIPT I-cache on CPU1 [ 0.041958] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071454] Detected PIPT I-cache on CPU2 [ 0.071597] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101183] Detected PIPT I-cache on CPU3 [ 0.101315] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130930] Detected PIPT I-cache on CPU4 [ 0.131029] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160751] Detected PIPT I-cache on CPU5 [ 0.160842] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161184] smp: Brought up 1 node, 6 CPUs [ 0.161385] SMP: Total of 6 processors activated. [ 0.161446] CPU features: detected: Privileged Access Never [ 0.161466] CPU features: detected: LSE atomic instructions [ 0.161478] CPU features: detected: User Access Override [ 0.161491] CPU features: detected: 32-bit EL0 Support [ 0.161503] CPU features: detected: RAS Extension Support [ 0.161514] CPU features: detected: CRC32 instructions [ 0.161528] CPU features: detected: 32-bit EL1 Support [ 0.230537] CPU: All CPU(s) started at EL2 [ 0.236751] devtmpfs: initialized [ 0.282790] Registered cp15_barrier emulation handler [ 0.282898] Registered setend emulation handler [ 0.282920] KASLR enabled [ 0.283170] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.283196] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.284455] pinctrl core: initialized pinctrl subsystem [ 0.285492] SMBIOS 3.0.0 present. [ 0.285520] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.286121] NET: Registered protocol family 16 [ 0.288134] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.288648] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.289336] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.289419] audit: initializing netlink subsys (disabled) [ 0.289667] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.290042] thermal_sys: Registered thermal governor 'step_wise' [ 0.290048] thermal_sys: Registered thermal governor 'power_allocator' [ 0.290063] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.292126] cpuidle: using governor menu [ 0.292581] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.293020] ASID allocator initialised with 32768 entries [ 0.293219] Serial: AMBA PL011 UART driver [ 0.296407] Tegra reboot handler registered. [ 0.366836] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.366994] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.367193] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.367243] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.367410] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.367519] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.367640] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.367686] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.367824] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.367903] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.370284] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.370341] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.370370] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.370400] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.370429] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.370456] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.370495] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.370528] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.370555] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.370580] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.370604] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.370628] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.370652] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.370681] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.370708] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.370733] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.370757] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.370845] mc-err: mcerr ops are set to t19x [ 0.383904] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.383927] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.383958] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.383972] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.391109] ACPI: Interpreter disabled. [ 0.392222] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.393617] iommu: Default domain type: Translated [ 0.393687] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.394043] SCSI subsystem initialized [ 0.394238] usbcore: registered new interface driver usbfs [ 0.394319] usbcore: registered new interface driver hub [ 0.394356] usbcore: registered new device driver usb [ 0.394799] mc: Linux media interface: v0.10 [ 0.394829] videodev: Linux video capture interface: v2.00 [ 0.395138] pps_core: LinuxPPS API ver. 1 registered [ 0.395150] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.395170] PTP clock support registered [ 0.395375] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.395655] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.395755] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.396344] Registered efivars operations [ 0.402277] FPGA manager framework [ 0.402469] Advanced Linux Sound Architecture Driver Initialized. [ 0.403060] Bluetooth: Core ver 2.22 [ 0.403104] NET: Registered protocol family 31 [ 0.403116] Bluetooth: HCI device and connection manager initialized [ 0.403131] Bluetooth: HCI socket layer initialized [ 0.403147] Bluetooth: L2CAP socket layer initialized [ 0.403168] Bluetooth: SCO socket layer initialized [ 0.404675] camchar: rtcpu character device driver loaded [ 0.405386] clocksource: Switched to clocksource arch_sys_counter [ 0.752744] VFS: Disk quotas dquot_6.6.0 [ 0.752809] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.753172] pnp: PnP ACPI: disabled [ 0.765790] la/ptsa driver initialized. [ 0.765921] NET: Registered protocol family 2 [ 0.766081] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.771342] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.771414] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.771706] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.772149] TCP: Hash tables configured (established 65536 bind 65536) [ 0.772290] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.772398] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.772578] NET: Registered protocol family 1 [ 0.773182] RPC: Registered named UNIX socket transport module. [ 0.773196] RPC: Registered udp transport module. [ 0.773224] RPC: Registered tcp transport module. [ 0.773235] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.773250] PCI: CLS 0 bytes, default 64 [ 0.773472] Trying to unpack rootfs image as initramfs... [ 0.968379] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.970753] Freeing initrd memory: 8196K [ 0.974857] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.974897] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.974935] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.975370] kvm [1]: IPA Size Limit: 40 bits [ 0.975925] kvm [1]: vgic interrupt IRQ9 [ 0.976360] kvm [1]: VHE mode initialized successfully [ 0.977732] Initialise system trusted keyrings [ 0.977994] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.983021] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.983630] NFS: Registering the id_resolver key type [ 0.983658] Key type id_resolver registered [ 0.983669] Key type id_legacy registered [ 0.983751] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.983772] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.983818] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.994381] NET: Registered protocol family 38 [ 0.994404] Key type asymmetric registered [ 0.994439] Asymmetric key parser 'x509' registered [ 0.994491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.994714] io scheduler mq-deadline registered [ 0.994728] io scheduler kyber registered [ 0.999627] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.002098] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.002157] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.002208] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.002257] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.002305] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.006516] scrncapt: init (heads:4 wins:6 planes:4) [ 1.006918] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.007561] EINJ: ACPI disabled. [ 1.010283] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.010304] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.010315] tegra-pmc: ### PMC reset level: L1 [ 1.010324] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.010364] tegra-pmc: PMC Prod config success [ 1.015321] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.019609] random: fast init done [ 1.019782] printk: console [ttyTCU0] enabled [ 2.572212] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.576836] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.581220] arm-smmu 10000000.iommu: stage 1 translation [ 2.586565] arm-smmu 10000000.iommu: stage 2 translation [ 2.592301] arm-smmu 10000000.iommu: nested translation [ 2.597431] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.604585] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.615389] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.618229] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.624775] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.632148] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.637564] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.642279] arm-smmu 12000000.iommu: stage 1 translation [ 2.647785] arm-smmu 12000000.iommu: stage 2 translation [ 2.653465] arm-smmu 12000000.iommu: nested translation [ 2.658933] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.666093] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.676739] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.678964] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.685763] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.693233] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.703035] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.706056] tegra_profiler: auth: init [ 2.710549] THERMAL EST: found 3 subdevs [ 2.713607] THERMAL EST num_resources: 0 [ 2.717706] [THERMAL EST subdev 0] [ 2.720999] [THERMAL EST subdev 1] [ 2.724171] [THERMAL EST subdev 2] [ 2.727666] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.733851] THERMAL EST: thz register success. [ 2.738375] THERMAL EST: end of probe, return err: 0 [ 2.743753] nvsciipc: loaded module [ 2.750521] tun: Universal TUN/TAP device driver, 1.6 [ 2.753029] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.759221] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.764799] e1000e: Intel(R) PRO/1000 Network Driver [ 2.769681] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.776017] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.781323] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.787204] PPP generic driver version 2.4.2 [ 2.791792] PPP BSD Compression module registered [ 2.796048] PPP Deflate Compression module registered [ 2.801272] PPP MPPE Compression module registered [ 2.806542] usbcore: registered new interface driver r8152 [ 2.811788] usbcore: registered new interface driver asix [ 2.817126] usbcore: registered new interface driver ax88179_178a [ 2.823243] usbcore: registered new interface driver cdc_ether [ 2.829455] usbcore: registered new interface driver net1080 [ 2.835061] usbcore: registered new interface driver cdc_subset [ 2.841130] usbcore: registered new interface driver zaurus [ 2.846547] usbcore: registered new interface driver cdc_ncm [ 2.852469] usbcore: registered new interface driver aqc111 [ 2.858114] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.863969] ohci-pci: OHCI PCI platform driver [ 2.868491] ohci-platform: OHCI generic platform driver [ 2.874132] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.880872] usbcore: registered new interface driver uas [ 2.884556] usbcore: registered new interface driver usb-storage [ 2.890681] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.896671] mousedev: PS/2 mouse device common for all mice [ 2.901710] usbcore: registered new interface driver xpad [ 2.909951] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.912410] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.920525] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.926978] i2c /dev entries driver [ 2.930381] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.936219] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.941258] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.946603] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.952177] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.957718] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.963138] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.977036] device-mapper: uevent: version 1.0.3 [ 2.977606] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.983407] cpuidle: Initializing cpuidle driver [ 2.987533] sdhci: Secure Digital Host Controller Interface driver [ 2.992307] sdhci: Copyright(c) Pierre Ossman [ 2.996146] Synopsys Designware Multimedia Card Interface Driver [ 3.002577] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.008614] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.009495] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.021487] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.040833] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.049937] vdd-1v0: supplied by regulator-dummy [ 3.055387] vdd-1v8-hs: supplied by regulator-dummy [ 3.060235] vdd-1v8-ls: supplied by regulator-dummy [ 3.065099] vdd-1v8-ao: supplied by regulator-dummy [ 3.068936] vddio-ddr-1v1: supplied by regulator-dummy [ 3.073346] vdd-rtc: supplied by regulator-dummy [ 3.075124] spmic-ldo1: supplied by regulator-dummy [ 3.076375] vdd-ao-3v3: supplied by regulator-dummy [ 3.082536] vddio-emmc-3v3: supplied by regulator-dummy [ 3.088802] spmic-ldo4: supplied by regulator-dummy [ 3.090002] vdd-usb-3v3: supplied by regulator-dummy [ 3.096160] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.102249] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.107755] spmic-ldo8: supplied by vdd-1v8-ls [ 3.109194] gpio-510 (gpio_default): hogged as output/high [ 3.110594] gpio-511 (gpio_default): hogged as output/high [ 3.115522] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.253867] max77686-rtc max77620-rtc: registered as rtc0 [ 3.254883] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.255216] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.994420] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.995687] hid: raw HID events driver (C) Jiri Kosina [ 3.996492] usbcore: registered new interface driver usbhid [ 3.996646] usbhid: USB HID core driver [ 3.998625] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.999835] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.161660] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.236488] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 75.639 ms) ÿá[ 4.084721] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.085663] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.086912] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.087890] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.089880] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.090699] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.091447] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.093176] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.093836] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.095879] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.100645] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.107067] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.112051] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.119591] denver_knobs_init:MTS_VERSION:55637613 [ 4.131415] t19x_cache tegra-cache: probed [ 4.138510] optee: probing for conduit method. [ 4.139459] optee: revision 3.16 (65cc2218) [ 4.140917] optee: dynamic shared memory is enabled [ 4.142552] optee: initialized driver [ 4.147128] nvpmodel: initialized successfully [ 4.147824] tegra_hv: get_hvd: not initialized yet [ 4.151660] user_ivc_mempool: hypervisor not present [ 4.158416] usbcore: registered new interface driver snd-usb-audio [ 4.164389] u32 classifier [ 4.165345] input device check on [ 4.169084] Actions configured [ 4.173025] Initializing XFRM netlink socket [ 4.178026] NET: Registered protocol family 10 [ 4.184508] Segment Routing with IPv6 [ 4.185187] NET: Registered protocol family 17 [ 4.189321] NET: Registered protocol family 15 [ 4.194059] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.207283] Bluetooth: RFCOMM socket layer initialized [ 4.212197] Bluetooth: RFCOMM ver 1.11 [ 4.215807] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.221893] Bluetooth: HIDP socket layer initialized [ 4.227704] 9pnet: Installing 9P2000 support [ 4.231348] Key type dns_resolver registered [ 4.236913] registered taskstats version 1 [ 4.239511] Loading compiled-in X.509 certificates [ 4.254560] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.256241] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.267519] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.267930] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.276467] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.284725] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.401616] tegra194-pcie 14160000.pcie: Link up [ 4.405126] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.405375] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.405614] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.405859] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.406141] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.406603] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.407128] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.422437] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.422972] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.423402] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.425173] pci 0004:01:00.0: supports D1 D2 [ 4.425560] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.438321] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.438678] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.439030] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.439440] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.439680] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.439863] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.440203] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.443747] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.452170] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.463071] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.467346] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.473217] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.480244] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.489994] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.490442] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.498815] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.506987] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.622422] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.623128] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.623393] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.623628] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.623913] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.624183] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.624670] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.625114] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.647643] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.648049] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.650418] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.651739] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.654099] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.655764] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.657071] pci 0005:00:00.0: Removing from iommu group 7 [ 5.657367] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.694942] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.719303] host1x 13e10000.host1x: initialized [ 5.721073] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.722069] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.723059] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.723791] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.724774] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.725690] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.726627] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.727276] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.728088] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.728764] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.732697] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.739394] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.749886] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.756525] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.766340] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.773560] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.783525] falcon 15340000.vic: Adding to iommu group 17 [ 5.797613] falcon 15340000.vic: initialized [ 5.798597] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.804179] falcon 15380000.nvjpg: initialized [ 5.804942] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.815937] falcon 154c0000.nvenc: initialized [ 5.816585] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.826825] falcon 15a80000.nvenc1: initialized [ 5.827423] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.838383] nvdec 15480000.nvdec: initialized [ 5.838984] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.847925] nvdec 15140000.nvdec1: initialized [ 5.848470] tsec 15500000.tsec: Adding to iommu group 18 [ 5.854810] tsec 15500000.tsec: initialized [ 5.855392] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.864082] tsec 15100000.tsecb: initialized [ 5.868678] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.890645] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.902634] gpio-374 (wifi-enable): hogged as output/high [ 5.902981] gpio-431 (camera-control-output-low): hogged as output/low [ 5.903269] gpio-432 (camera-control-output-low): hogged as output/low [ 5.905146] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.907152] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.908125] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.914883] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.920145] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.925742] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.931306] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.940158] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.947288] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.958684] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.963846] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.969828] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.978654] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.987944] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.995120] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.002414] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.008680] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.018740] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.024590] pva 16000000.pva0: Adding to iommu group 22 [ 6.050937] pva 16000000.pva0: initialized [ 6.056423] pva 16800000.pva1: Adding to iommu group 23 [ 6.067130] pva 16800000.pva1: initialized [ 6.071892] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.084510] nvdla 15880000.nvdla0: initialized [ 6.086253] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.095239] nvdla 158c0000.nvdla1: initialized [ 6.102036] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.102433] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.102836] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.102920] tegradc 15200000.display: Adding to iommu group 26 [ 6.102931] tegradc 15210000.display: Adding to iommu group 26 [ 6.103017] tegradccommon 15200000.display-hub: dma mapping done [ 6.103265] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.109748] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.111419] tegradc 15210000.display: disp0 connected to head1->sor [ 6.114860] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.120319] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.126593] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.133839] tegradc 15210000.display: DT parsed successfully [ 6.139183] tegra_cec 3960000.tegra_cec: probed [ 6.144766] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.145101] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.150599] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.157170] generic_infoframe_type: 0x87 [ 6.166609] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.169616] tegradc 15200000.display: DT parsed successfully [ 6.174063] kfuse 3830000.kfuse: initialized [ 6.180427] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.186681] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.204937] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.212097] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.212351] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.219773] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.219782] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.233994] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.243265] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.247835] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.263504] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.265275] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.280878] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.289147] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.290384] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.302011] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.302939] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.329615] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.330019] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.332484] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.340798] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.349593] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.355997] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.363664] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.370783] usb usb1: Product: xHCI Host Controller [ 6.375771] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.382062] usb usb1: SerialNumber: 3610000.xhci [ 6.387871] hub 1-0:1.0: USB hub found [ 6.390726] hub 1-0:1.0: 4 ports detected [ 6.395112] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.399771] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.407648] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.415158] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.422988] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.430214] usb usb2: Product: xHCI Host Controller [ 6.435418] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.441367] usb usb2: SerialNumber: 3610000.xhci [ 6.447303] hub 2-0:1.0: USB hub found [ 6.449898] hub 2-0:1.0: 4 ports detected [ 6.492668] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.498369] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.499751] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.500014] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.513680] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.514752] tegra194-cpufreq ccplex: probed with BWMGR [ 6.516075] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.516955] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.517573] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.519041] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.527509] tegra194-vi5 15c10000.vi: initialized [ 6.528072] mmc0: CQHCI version 5.10 [ 6.528809] tegradc 15210000.display: disp0 connected to head1->sor [ 6.530583] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.533591] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.540173] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.547044] tegradc 15210000.display: DT parsed successfully [ 6.555254] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.560634] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.560712] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.567291] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.567298] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.567314] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.575159] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.577547] generic_infoframe_type: 0x87 [ 6.577604] tegradc 15200000.display: DT parsed successfully [ 6.577645] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.578354] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.578358] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.578362] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.578727] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.578732] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.578885] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.580011] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.580016] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.582291] tegradc 15200000.display: probed [ 6.589804] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.653451] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.657226] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.713911] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.714268] Console: switching to colour frame buffer device 240x67 [ 6.715555] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.721216] tegradc 15200000.display: fb registered [ 6.728417] mmc0: Command Queue Engine enabled [ 6.728422] mmc0: periodic cache flush enabled [ 6.728438] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.729007] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.729231] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.733222] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.734643] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.745161] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.748390] nvethernet 2490000.ethernet: Macsec not supported [ 6.749839] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.755436] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.760894] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.812208] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.819517] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.827260] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.833789] tegra-se-nvhost 15810000.se: initialized [ 6.838639] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.839900] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.844205] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.850119] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.850125] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.850149] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.850153] usb 1-2: Manufacturer: Generic [ 6.852205] hub 1-2:1.0: USB hub found [ 6.853263] hub 1-2:1.0: 4 ports detected [ 6.853404] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.853414] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.854083] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.854087] Extcon AUX1(HDMI) enable [ 6.854209] tegradc 15210000.display: disp1 connected to head1->sor [ 6.854360] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.854439] tegradc 15210000.display: DT parsed successfully [ 6.854472] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.854596] tegradc 15210000.display: vblank syncpt # 14 for dc 1 [ 6.854602] tegradc 15210000.display: vpulse3 syncpt # 15 for dc 1 [ 6.859260] tegra-se-nvhost 15820000.se: initialized [ 6.861370] tegradc 15210000.display: probed [ 6.965600] tegradc 15210000.display: fb registered [ 6.967754] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.977769] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.983907] tegra-se-nvhost 15830000.se: initialized [ 6.985295] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.989448] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.995545] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.002281] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.009599] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.021168] tegradc 15210000.display: blank - powerdown [ 7.021531] tegra-se-nvhost 15840000.se: initialized [ 7.026041] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.030981] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.032958] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.034572] tegra_actmon d230000.actmon: in actmon_register()... [ 7.034732] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.035113] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.035700] hvc_sysfs: hypervisor is not present [ 7.039080] Extcon DP: HPD disabled [ 7.039087] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.039106] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.039110] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.061013] ALSA device list: ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.103622] No soundcards found. [ 7.103740] tegradc 15200000.display: blank - powerdown [ 7.116511] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.116517] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.116522] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.116526] usb 2-3: Manufacturer: Generic [ 7.127556] hub 2-3:1.0: USB hub found [ 7.129437] hub 2-3:1.0: 4 ports detected [ 7.140363] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.140368] Extcon AUX1(HDMI) disable [ 7.163789] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.164686] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.169473] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.169478] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.176064] tegradc 15200000.display: unblank [ 7.177247] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.177490] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.183454] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.185340] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.189358] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.189362] Extcon AUX1(HDMI) enable [ 7.202098] tegradc 15200000.display: sync windows ret = 247 [ 7.233434] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.244564] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.245876] Freeing unused kernel memory: 3968K [ 7.251708] Extcon HDMI: HPD enabled [ 7.251714] tegradc 15200000.display: hdmi: plugged [ 7.265100] Run /init as init process [ 7.325739] Root device found: mmcblk0p1 [ 7.329050] Found dev node: /dev/mmcblk0p1 [ 7.366217] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.371522] Rootfs mounted over mmcblk0p1 [ 7.398836] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.400277] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.401665] usb 1-3: Product: Bluetooth Radio [ 7.402869] usb 1-3: Manufacturer: Realtek [ 7.404085] usb 1-3: SerialNumber: 00e04c000001 [ 7.410580] Switching from initrd to actual rootfs [ 7.562844] systemd[1]: System time before build time, advancing clock. [ 7.637513] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.642300] systemd[1]: Detected architecture arm64. [ 7.687831] systemd[1]: Set hostname to . [ 7.852685] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.205261] random: systemd: uninitialized urandom read (16 bytes read) [ 8.206940] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.208487] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.214218] systemd[1]: Created slice system-modprobe.slice. [ 8.217523] random: systemd: uninitialized urandom read (16 bytes read) [ 8.220125] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.223258] random: systemd: uninitialized urandom read (16 bytes read) [ 8.225869] systemd[1]: Created slice User and Session Slice. [ 8.229209] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.233584] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.237055] systemd[1]: Reached target User and Group Name Lookups. [ 8.240206] systemd[1]: Reached target Slices. [ 8.243243] systemd[1]: Reached target Swap. [ 8.247283] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.250848] systemd[1]: Listening on Syslog Socket. [ 8.254389] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.257796] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.262003] systemd[1]: Listening on Journal Audit Socket. [ 8.265579] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.269338] systemd[1]: Listening on Journal Socket. [ 8.273037] systemd[1]: Listening on udev Control Socket. [ 8.276571] systemd[1]: Listening on udev Kernel Socket. [ 8.285741] systemd[1]: Mounting Huge Pages File System... [ 8.297454] systemd[1]: Mounting POSIX Message Queue File System... [ 8.310114] systemd[1]: Mounting RPC Pipe File System... [ 8.322784] systemd[1]: Mounting Kernel Debug File System... [ 8.331672] systemd[1]: Mounting Kernel Trace File System... [ 8.342029] systemd[1]: Starting Journal Service... [ 8.352591] systemd[1]: Starting Set the console keyboard layout... [ 8.362675] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.366424] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.372849] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.382152] systemd[1]: Started Nameserver information manager. [ 8.386401] systemd[1]: Reached target Network (Pre). [ 8.392827] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.394736] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.402181] systemd[1]: Starting Load Kernel Modules... [ 8.410460] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.419500] systemd[1]: Starting udev Coldplug all Devices... [ 8.430253] systemd[1]: Mounted Huge Pages File System. [ 8.435233] systemd[1]: Mounted POSIX Message Queue File System. [ 8.439093] systemd[1]: Mounted RPC Pipe File System. [ 8.440576] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.445370] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.446998] systemd[1]: Mounted Kernel Debug File System. [ 8.447446] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.450009] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.450204] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.450208] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.450370] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.450655] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.458510] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.458523] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.462882] systemd[1]: Mounted Kernel Trace File System. [ 8.472140] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.478886] systemd[1]: nvfb-udev.service: Succeeded. [ 8.483858] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.496590] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.508635] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.510916] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.517864] systemd[1]: Starting Load/Save Random Seed... [ 8.525937] systemd[1]: Starting Create System Users... [ 8.560817] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.560817] [ 8.584654] systemd[1]: Finished Create System Users. [ 8.591984] systemd[1]: Finished Load Kernel Modules. [ 8.596704] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.603123] systemd[1]: Mounting Kernel Configuration File System... [ 8.610586] systemd[1]: Started OP-TEE Client Supplicant. [ 8.619613] systemd[1]: Starting Apply Kernel Variables... [ 8.627401] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.637840] systemd[1]: Finished Set the console keyboard layout. [ 8.642137] systemd[1]: Mounted Kernel Configuration File System. [ 9.000142] random: crng init done [ 9.001520] random: 7 urandom warning(s) missed due to ratelimiting [ 9.964409] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.970843] imx219 9-0010: board setup failed [ 9.972062] imx219: probe of 9-0010 failed with error -121 [ 9.988586] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.995202] imx219 10-0010: board setup failed [ 9.996400] imx219: probe of 10-0010 failed with error -121 [ 10.096966] hot-surface-alert cooling state: 0 -> 1 [ 10.883025] using random self ethernet address [ 10.894467] using random host ethernet address [ 11.577255] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.577268] Creating 1 MTD partitions on "spi6.0": [ 11.580859] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.144087] using random self ethernet address [ 12.146663] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.866603] nvidia: loading out-of-tree module taints kernel. [ 59.210841] watchdog: watchdog0: watchdog did not stop! [ 59.683128] Trying to unregister non-registered hwtime source [ 62.744060] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.745640] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.419] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.614] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.644] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.743] initializing target [0003.744] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000664] Console: colour dummy device 80x25 [ 0.002085] printk: console [tty0] enabled [ 0.002143] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002178] pid_max: default: 32768 minimum: 301 [ 0.002349] LSM: Security Framework initializing [ 0.002406] Yama: becoming mindful. [ 0.002447] SELinux: Initializing. [ 0.002636] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002682] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005774] rcu: Hierarchical SRCU implementation. [ 0.006043] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006682] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006729] DTB Build time: Aug 10 2022 20:31:49 [ 0.009351] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009608] Remapping and enabling EFI services. [ 0.011814] smp: Bringing up secondary CPUs ... [ 0.041073] Detected PIPT I-cache on CPU1 [ 0.041163] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070816] Detected PIPT I-cache on CPU2 [ 0.070968] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100570] Detected PIPT I-cache on CPU3 [ 0.100670] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130363] Detected PIPT I-cache on CPU4 [ 0.130460] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160235] Detected PIPT I-cache on CPU5 [ 0.160384] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160739] smp: Brought up 1 node, 6 CPUs [ 0.160962] SMP: Total of 6 processors activated. [ 0.161008] CPU features: detected: Privileged Access Never [ 0.161030] CPU features: detected: LSE atomic instructions [ 0.161044] CPU features: detected: User Access Override [ 0.161057] CPU features: detected: 32-bit EL0 Support [ 0.161070] CPU features: detected: RAS Extension Support [ 0.161083] CPU features: detected: CRC32 instructions [ 0.161096] CPU features: detected: 32-bit EL1 Support [ 0.231139] CPU: All CPU(s) started at EL2 [ 0.237782] devtmpfs: initialized [ 0.305734] Registered cp15_barrier emulation handler [ 0.305871] Registered setend emulation handler [ 0.305901] KASLR enabled [ 0.306176] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.306214] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.308343] pinctrl core: initialized pinctrl subsystem [ 0.309544] SMBIOS 3.0.0 present. [ 0.309609] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.310346] NET: Registered protocol family 16 [ 0.312888] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.313635] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.315028] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.315109] audit: initializing netlink subsys (disabled) [ 0.315416] audit: type=2000 audit(0.312:1): state=initialized audit_enabled=0 res=1 [ 0.315960] thermal_sys: Registered thermal governor 'step_wise' [ 0.315969] thermal_sys: Registered thermal governor 'power_allocator' [ 0.315990] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.319303] cpuidle: using governor menu [ 0.319757] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.320251] ASID allocator initialised with 32768 entries [ 0.320511] Serial: AMBA PL011 UART driver [ 0.324259] Tegra reboot handler registered. [ 0.393613] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.393731] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.393894] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.393957] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.394104] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.394152] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.394261] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.394304] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.394419] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.394481] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.396549] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.396583] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.396612] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.396639] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.396668] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.396695] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.396735] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.396791] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.396820] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.396861] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.396889] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.396927] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.396951] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.396975] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.396999] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.397022] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.397045] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.397133] mc-err: mcerr ops are set to t19x [ 0.408333] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.408357] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.408369] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.408413] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.414944] ACPI: Interpreter disabled. [ 0.416208] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.417422] iommu: Default domain type: Translated [ 0.417487] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.417821] SCSI subsystem initialized [ 0.417976] usbcore: registered new interface driver usbfs [ 0.418021] usbcore: registered new interface driver hub [ 0.418052] usbcore: registered new device driver usb [ 0.418426] mc: Linux media interface: v0.10 [ 0.418456] videodev: Linux video capture interface: v2.00 [ 0.418745] pps_core: LinuxPPS API ver. 1 registered [ 0.418759] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.418780] PTP clock support registered [ 0.418962] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.419279] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.419413] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.419994] Registered efivars operations [ 0.425513] FPGA manager framework [ 0.425619] Advanced Linux Sound Architecture Driver Initialized. [ 0.426172] Bluetooth: Core ver 2.22 [ 0.426209] NET: Registered protocol family 31 [ 0.426220] Bluetooth: HCI device and connection manager initialized [ 0.426234] Bluetooth: HCI socket layer initialized [ 0.426263] Bluetooth: L2CAP socket layer initialized [ 0.426284] Bluetooth: SCO socket layer initialized [ 0.427822] camchar: rtcpu character device driver loaded [ 0.428615] clocksource: Switched to clocksource arch_sys_counter [ 0.727910] VFS: Disk quotas dquot_6.6.0 [ 0.727977] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.728271] pnp: PnP ACPI: disabled [ 0.738475] la/ptsa driver initialized. [ 0.738590] NET: Registered protocol family 2 [ 0.738762] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.743331] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.743400] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.743712] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.744148] TCP: Hash tables configured (established 65536 bind 65536) [ 0.744263] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.744352] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.744626] NET: Registered protocol family 1 [ 0.745564] RPC: Registered named UNIX socket transport module. [ 0.745591] RPC: Registered udp transport module. [ 0.745606] RPC: Registered tcp transport module. [ 0.745620] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.745655] PCI: CLS 0 bytes, default 64 [ 0.745976] Trying to unpack rootfs image as initramfs... [ 0.947592] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.949791] Freeing initrd memory: 8196K [ 0.953544] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.953582] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.953633] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.954198] kvm [1]: IPA Size Limit: 40 bits [ 0.954758] kvm [1]: vgic interrupt IRQ9 [ 0.955270] kvm [1]: VHE mode initialized successfully [ 0.956629] Initialise system trusted keyrings [ 0.956917] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.961190] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.961791] NFS: Registering the id_resolver key type [ 0.961836] Key type id_resolver registered [ 0.961846] Key type id_legacy registered [ 0.961931] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.961949] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.961978] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.972196] NET: Registered protocol family 38 [ 0.972220] Key type asymmetric registered [ 0.972230] Asymmetric key parser 'x509' registered [ 0.972279] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.972470] io scheduler mq-deadline registered [ 0.972484] io scheduler kyber registered [ 0.977526] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.979955] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.980020] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.980072] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.980143] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.980211] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.984715] scrncapt: init (heads:4 wins:6 planes:4) [ 0.985093] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.985670] EINJ: ACPI disabled. [ 0.988050] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.988071] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.988081] tegra-pmc: ### PMC reset level: L1 [ 0.988090] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.988131] tegra-pmc: PMC Prod config success [ 0.992515] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.996734] random: fast init done [ 0.996927] printk: console [ttyTCU0] enabled [ 2.549878] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.553918] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.558428] arm-smmu 10000000.iommu: stage 1 translation [ 2.564149] arm-smmu 10000000.iommu: stage 2 translation [ 2.569421] arm-smmu 10000000.iommu: nested translation [ 2.575002] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.582202] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.594019] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.595019] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.601875] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.609599] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.614651] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.619621] arm-smmu 12000000.iommu: stage 1 translation [ 2.624878] arm-smmu 12000000.iommu: stage 2 translation [ 2.630556] arm-smmu 12000000.iommu: nested translation [ 2.635985] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.643163] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.654594] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.656009] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.662850] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.670082] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.679879] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.683267] tegra_profiler: auth: init [ 2.687231] THERMAL EST: found 3 subdevs [ 2.690942] THERMAL EST num_resources: 0 [ 2.694527] [THERMAL EST subdev 0] [ 2.698106] [THERMAL EST subdev 1] [ 2.701262] [THERMAL EST subdev 2] [ 2.704763] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.711214] THERMAL EST: thz register success. [ 2.715204] THERMAL EST: end of probe, return err: 0 [ 2.720799] nvsciipc: loaded module [ 2.727662] tun: Universal TUN/TAP device driver, 1.6 [ 2.730337] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.736534] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.741854] e1000e: Intel(R) PRO/1000 Network Driver [ 2.747029] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.752846] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.758135] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.764640] PPP generic driver version 2.4.2 [ 2.768840] PPP BSD Compression module registered [ 2.773363] PPP Deflate Compression module registered [ 2.778615] PPP MPPE Compression module registered [ 2.783371] usbcore: registered new interface driver r8152 [ 2.789179] usbcore: registered new interface driver asix [ 2.794218] usbcore: registered new interface driver ax88179_178a [ 2.800335] usbcore: registered new interface driver cdc_ether [ 2.806560] usbcore: registered new interface driver net1080 [ 2.811892] usbcore: registered new interface driver cdc_subset [ 2.818184] usbcore: registered new interface driver zaurus [ 2.823890] usbcore: registered new interface driver cdc_ncm [ 2.829563] usbcore: registered new interface driver aqc111 [ 2.834968] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.841285] ohci-pci: OHCI PCI platform driver [ 2.845328] ohci-platform: OHCI generic platform driver [ 2.851157] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.857649] usbcore: registered new interface driver uas [ 2.861871] usbcore: registered new interface driver usb-storage [ 2.867801] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.874069] mousedev: PS/2 mouse device common for all mice [ 2.879060] usbcore: registered new interface driver xpad [ 2.886810] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.889524] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.897308] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.904167] i2c /dev entries driver [ 2.907455] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.913225] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.918408] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.923693] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.929489] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.934602] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.940226] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.952259] device-mapper: uevent: version 1.0.3 [ 2.952742] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.960199] cpuidle: Initializing cpuidle driver [ 2.964385] sdhci: Secure Digital Host Controller Interface driver [ 2.969113] sdhci: Copyright(c) Pierre Ossman [ 2.973491] Synopsys Designware Multimedia Card Interface Driver [ 2.979627] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.985331] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.991419] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.998713] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.016480] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.025582] vdd-1v0: supplied by regulator-dummy [ 3.030948] vdd-1v8-hs: supplied by regulator-dummy [ 3.035683] vdd-1v8-ls: supplied by regulator-dummy [ 3.040406] vdd-1v8-ao: supplied by regulator-dummy [ 3.044217] vddio-ddr-1v1: supplied by regulator-dummy [ 3.048525] vdd-rtc: supplied by regulator-dummy [ 3.050171] spmic-ldo1: supplied by regulator-dummy [ 3.051339] vdd-ao-3v3: supplied by regulator-dummy [ 3.057461] vddio-emmc-3v3: supplied by regulator-dummy [ 3.063556] spmic-ldo4: supplied by regulator-dummy [ 3.064730] vdd-usb-3v3: supplied by regulator-dummy [ 3.070752] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.076806] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.082319] spmic-ldo8: supplied by vdd-1v8-ls [ 3.083634] gpio-510 (gpio_default): hogged as output/high [ 3.085371] gpio-511 (gpio_default): hogged as output/high [ 3.092520] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.230760] max77686-rtc max77620-rtc: registered as rtc0 [ 3.232044] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.232321] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.921287] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.922224] hid: raw HID events driver (C) Jiri Kosina [ 3.922824] usbcore: registered new interface driver usbhid [ 3.922968] usbhid: USB HID core driver [ 3.924640] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.925730] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.983487] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.059322] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.645 ms) ÿá[ 4.011198] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.011873] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.013152] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.013987] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.015579] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.016154] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.016932] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.018115] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.018428] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.020186] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.027566] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.034052] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.038716] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.046122] denver_knobs_init:MTS_VERSION:55637613 [ 4.057889] t19x_cache tegra-cache: probed [ 4.060843] optee: probing for conduit method. [ 4.061750] optee: revision 3.16 (65cc2218) [ 4.062925] optee: dynamic shared memory is enabled [ 4.066097] optee: initialized driver [ 4.072136] nvpmodel: initialized successfully [ 4.073608] tegra_hv: get_hvd: not initialized yet [ 4.078373] user_ivc_mempool: hypervisor not present [ 4.085007] usbcore: registered new interface driver snd-usb-audio [ 4.091079] u32 classifier [ 4.092357] input device check on [ 4.096182] Actions configured [ 4.099433] Initializing XFRM netlink socket [ 4.104238] NET: Registered protocol family 10 [ 4.110791] Segment Routing with IPv6 [ 4.111998] NET: Registered protocol family 17 [ 4.116102] NET: Registered protocol family 15 [ 4.120514] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.134529] Bluetooth: RFCOMM socket layer initialized [ 4.138771] Bluetooth: RFCOMM ver 1.11 [ 4.142852] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.148406] Bluetooth: HIDP socket layer initialized [ 4.154539] 9pnet: Installing 9P2000 support [ 4.158105] Key type dns_resolver registered [ 4.163374] registered taskstats version 1 [ 4.166555] Loading compiled-in X.509 certificates [ 4.178020] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.182352] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.191768] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.194483] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.202786] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.211393] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.328628] tegra194-pcie 14160000.pcie: Link up [ 4.331637] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.331874] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.332059] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.332304] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.332495] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.332945] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.333387] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.342101] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.342499] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.342933] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.344441] pci 0004:01:00.0: supports D1 D2 [ 4.344653] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.352235] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.352546] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.352875] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.353266] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.353528] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.357307] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.363427] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.370783] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.379056] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.389026] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.394074] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.399420] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.406029] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.416199] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.417376] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.425793] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.433976] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.549690] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.550263] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.550485] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.550616] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.550909] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.551108] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.551535] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.552059] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.571783] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.572077] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.573963] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.575142] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.576385] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.577888] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.579008] pci 0005:00:00.0: Removing from iommu group 7 [ 5.579330] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.614491] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.638010] host1x 13e10000.host1x: initialized [ 5.639497] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.640366] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.641748] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.642457] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.643706] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.644368] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.645601] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.646266] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.647100] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.649643] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.659697] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.666740] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.676744] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.683659] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.693654] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.700912] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.710819] falcon 15340000.vic: Adding to iommu group 17 [ 5.725843] falcon 15340000.vic: initialized [ 5.726910] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.732671] falcon 15380000.nvjpg: initialized [ 5.733260] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.743900] falcon 154c0000.nvenc: initialized [ 5.744448] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.753555] falcon 15a80000.nvenc1: initialized [ 5.754118] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.765913] nvdec 15480000.nvdec: initialized [ 5.766398] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.776109] nvdec 15140000.nvdec1: initialized [ 5.776635] tsec 15500000.tsec: Adding to iommu group 18 [ 5.782303] tsec 15500000.tsec: initialized [ 5.782729] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.791031] tsec 15100000.tsecb: initialized [ 5.795096] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.822695] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.835017] gpio-374 (wifi-enable): hogged as output/high [ 5.835352] gpio-431 (camera-control-output-low): hogged as output/low [ 5.835580] gpio-432 (camera-control-output-low): hogged as output/low [ 5.837606] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.839757] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.840324] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.841765] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.847302] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.853295] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.858529] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.866927] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.874294] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.885993] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.891058] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.896913] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.905550] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.915011] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.922279] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.929956] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.935831] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.945852] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.951711] pva 16000000.pva0: Adding to iommu group 22 [ 5.980123] pva 16000000.pva0: initialized [ 5.985029] pva 16800000.pva1: Adding to iommu group 23 [ 5.997077] pva 16800000.pva1: initialized [ 6.001950] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.014869] nvdla 15880000.nvdla0: initialized [ 6.016282] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.024964] nvdla 158c0000.nvdla1: initialized [ 6.029321] tegradc 15200000.display: Adding to iommu group 26 [ 6.029670] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.029702] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.030026] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.030461] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.030842] tegradccommon 15200000.display-hub: dma mapping done [ 6.031165] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.036374] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.036884] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.037022] tegradc 15210000.display: Adding to iommu group 26 [ 6.041952] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.048283] generic_infoframe_type: 0x87 [ 6.053760] tegra_cec 3960000.tegra_cec: probed [ 6.054819] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.059651] tegradc 15200000.display: DT parsed successfully [ 6.065617] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.067866] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.073939] kfuse 3830000.kfuse: initialized [ 6.083415] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.087026] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.094001] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.094009] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.095067] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.098760] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.099711] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.106882] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.108266] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.114524] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.124971] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.131891] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.136474] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.143427] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.150508] tegradc 15210000.display: disp0 connected to head1->sor [ 6.156413] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.165420] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.174465] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.181141] tegradc 15210000.display: DT parsed successfully [ 6.200501] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.202946] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.209016] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.259510] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.268069] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.276545] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.283374] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.290821] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.297757] usb usb1: Product: xHCI Host Controller [ 6.302685] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.309160] usb usb1: SerialNumber: 3610000.xhci [ 6.315091] hub 1-0:1.0: USB hub found [ 6.317805] hub 1-0:1.0: 4 ports detected [ 6.322528] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.326960] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.334574] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.342532] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.350433] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.357715] usb usb2: Product: xHCI Host Controller [ 6.362615] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.368874] usb usb2: SerialNumber: 3610000.xhci [ 6.374608] hub 2-0:1.0: USB hub found [ 6.377116] hub 2-0:1.0: 4 ports detected [ 6.419815] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.426024] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.427764] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.427960] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.441605] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.442661] tegra194-cpufreq ccplex: probed with BWMGR [ 6.443928] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.444410] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.444940] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.446241] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.454530] tegra194-vi5 15c10000.vi: initialized [ 6.456237] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.457282] generic_infoframe_type: 0x87 [ 6.457606] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.461445] tegradc 15200000.display: DT parsed successfully [ 6.467628] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.473183] mmc0: CQHCI version 5.10 [ 6.473192] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.481136] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.481156] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.481191] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.481196] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.481201] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.488651] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.492894] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.492899] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.533687] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.541973] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.549857] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.550102] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.556384] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.562447] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.580535] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.588670] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.594759] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.595443] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.597821] tegradc 15200000.display: probed [ 6.628276] nvethernet 2490000.ethernet: Macsec not supported [ 6.635628] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.643308] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.648088] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.655107] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.655335] Console: switching to colour frame buffer device 240x67 [ 6.656439] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.661707] tegradc 15200000.display: fb registered [ 6.670679] tegra-se-nvhost 15810000.se: initialized [ 6.673778] mmc0: Command Queue Engine enabled [ 6.673783] mmc0: periodic cache flush enabled [ 6.673798] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.674291] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.674431] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.674614] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.678315] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.684405] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.689375] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.693304] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.699450] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.704952] tegra-se-nvhost 15820000.se: initialized [ 6.756384] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.761163] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.767722] tegra-se-nvhost 15830000.se: initialized [ 6.772791] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.773057] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.778361] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.780368] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.780375] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.780379] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.780383] usb 1-2: Manufacturer: Generic [ 6.782427] hub 1-2:1.0: USB hub found [ 6.783705] hub 1-2:1.0: 4 ports detected [ 6.788166] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.794004] tegra-se-nvhost 15840000.se: initialized [ 6.801258] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.810426] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.814039] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.818829] tegra_actmon d230000.actmon: in actmon_register()... [ 6.821578] Extcon AUX1(HDMI) enable [ 6.825906] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.833405] tegradc 15210000.display: disp1 connected to head1->sor [ 6.845990] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.852690] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.860108] hvc_sysfs: hypervisor is not present [ 6.865477] tegradc 15210000.display: DT parsed successfully [ 6.906008] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.909575] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.939204] random: crng init done [ 6.941366] ALSA device list: [ 6.941446] No soundcards found. [ 6.941917] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.942113] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.950461] tegradc 15210000.display: probed [ 6.950817] tegradc 15210000.display: fb registered [ 6.956343] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.958066] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.960496] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.961269] Freeing unused kernel memory: 3968K [ 6.968683] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.976337] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.980724] Run /init as init process [ 6.981201] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.002332] usb 2-3: Manufacturer: Generic [ 7.002377] tegradc 15210000.display: blank - powerdown ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.011446] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.011449] Extcon DP: HPD disabled [ 7.011454] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.011465] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.011470] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.011572] tegradc 15200000.display: blank - powerdown [ 7.012914] hub 2-3:1.0: USB hub found [ 7.014897] hub 2-3:1.0: 4 ports detected [ 7.056808] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.056812] Extcon AUX1(HDMI) disable [ 7.072657] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.072663] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.076633] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.080083] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.081036] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.093306] tegradc 15200000.display: unblank [ 7.094419] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.094619] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.100421] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.102321] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.106359] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.106363] Extcon AUX1(HDMI) enable [ 7.119085] tegradc 15200000.display: sync windows ret = 247 [ 7.165366] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.172505] Extcon HDMI: HPD enabled [ 7.176189] tegradc 15200000.display: hdmi: plugged [ 7.214593] Root device found: mmcblk0p1 [ 7.217979] Found dev node: /dev/mmcblk0p1 [ 7.225862] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.227265] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.228612] usb 1-3: Product: Bluetooth Radio [ 7.229866] usb 1-3: Manufacturer: Realtek [ 7.231104] usb 1-3: SerialNumber: 00e04c000001 [ 7.253517] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.258830] Rootfs mounted over mmcblk0p1 [ 7.295797] Switching from initrd to actual rootfs [ 7.440102] systemd[1]: System time before build time, advancing clock. [ 7.513127] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.518044] systemd[1]: Detected architecture arm64. [ 7.555202] systemd[1]: Set hostname to . [ 7.715823] systemd-sysv-generator[244]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.064320] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.066054] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.071540] systemd[1]: Created slice system-modprobe.slice. [ 8.076045] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.080097] systemd[1]: Created slice User and Session Slice. [ 8.083515] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.087498] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.090850] systemd[1]: Reached target User and Group Name Lookups. [ 8.093968] systemd[1]: Reached target Slices. [ 8.096971] systemd[1]: Reached target Swap. [ 8.100838] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.104358] systemd[1]: Listening on Syslog Socket. [ 8.108130] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.112176] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.117769] systemd[1]: Listening on Journal Audit Socket. [ 8.121237] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.124891] systemd[1]: Listening on Journal Socket. [ 8.128429] systemd[1]: Listening on udev Control Socket. [ 8.131742] systemd[1]: Listening on udev Kernel Socket. [ 8.140256] systemd[1]: Mounting Huge Pages File System... [ 8.148815] systemd[1]: Mounting POSIX Message Queue File System... [ 8.156776] systemd[1]: Mounting RPC Pipe File System... [ 8.165364] systemd[1]: Mounting Kernel Debug File System... [ 8.173923] systemd[1]: Mounting Kernel Trace File System... [ 8.184121] systemd[1]: Starting Journal Service... [ 8.193365] systemd[1]: Starting Set the console keyboard layout... [ 8.201606] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.205159] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.211583] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.220915] systemd[1]: Started Nameserver information manager. [ 8.225601] systemd[1]: Reached target Network (Pre). [ 8.233383] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.235244] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.241648] systemd[1]: Starting Load Kernel Modules... [ 8.249403] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.257204] systemd[1]: Starting udev Coldplug all Devices... [ 8.268035] systemd[1]: Mounted Huge Pages File System. [ 8.271667] systemd[1]: Mounted POSIX Message Queue File System. [ 8.275232] systemd[1]: Mounted RPC Pipe File System. [ 8.278026] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.278687] systemd[1]: Mounted Kernel Debug File System. [ 8.284411] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.286395] systemd[1]: Mounted Kernel Trace File System. [ 8.286752] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.289393] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.289409] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.292233] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.292436] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.292701] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.292869] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.292877] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.311180] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.318093] systemd[1]: nvfb-udev.service: Succeeded. [ 8.323124] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.335071] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.347573] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.349608] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.355552] systemd[1]: Starting Load/Save Random Seed... [ 8.364314] systemd[1]: Starting Create System Users... [ 8.390390] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.390390] [ 8.422383] systemd[1]: Finished Load/Save Random Seed. [ 8.429266] systemd[1]: Finished Load Kernel Modules. [ 8.434070] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.440257] systemd[1]: Mounting Kernel Configuration File System... [ 8.448260] systemd[1]: Started OP-TEE Client Supplicant. [ 8.456845] systemd[1]: Starting Apply Kernel Variables... [ 8.464017] systemd[1]: Mounted Kernel Configuration File System. [ 8.475371] systemd[1]: Finished Set the console keyboard layout. [ 8.482265] systemd[1]: Finished Create System Users. [ 9.852817] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.864700] imx219 9-0010: board setup failed [ 9.866020] imx219: probe of 9-0010 failed with error -121 [ 9.878335] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.884733] imx219 10-0010: board setup failed [ 9.886141] imx219: probe of 10-0010 failed with error -121 [ 9.923416] hot-surface-alert cooling state: 0 -> 1 [ 10.720110] using random self ethernet address [ 10.755483] using random host ethernet address [ 11.485804] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.485810] Creating 1 MTD partitions on "spi6.0": [ 11.485821] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.061699] using random self ethernet address [ 12.063725] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.791006] nvidia: loading out-of-tree module taints kernel. [ 59.338424] watchdog: watchdog0: watchdog did not stop! [ 59.813394] Trying to unregister non-registered hwtime source [ 62.878783] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.880838] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.421] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.614] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.644] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.743] initializing target [0003.744] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000918] Console: colour dummy device 80x25 [ 0.002420] printk: console [tty0] enabled [ 0.002484] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002518] pid_max: default: 32768 minimum: 301 [ 0.002748] LSM: Security Framework initializing [ 0.002807] Yama: becoming mindful. [ 0.002849] SELinux: Initializing. [ 0.003054] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003107] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006287] rcu: Hierarchical SRCU implementation. [ 0.006566] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007857] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007951] DTB Build time: Aug 10 2022 20:31:49 [ 0.012769] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.013053] Remapping and enabling EFI services. [ 0.015279] smp: Bringing up secondary CPUs ... [ 0.045745] Detected PIPT I-cache on CPU1 [ 0.045824] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075800] Detected PIPT I-cache on CPU2 [ 0.075902] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105589] Detected PIPT I-cache on CPU3 [ 0.105686] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135410] Detected PIPT I-cache on CPU4 [ 0.135511] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165180] Detected PIPT I-cache on CPU5 [ 0.165251] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165648] smp: Brought up 1 node, 6 CPUs [ 0.165876] SMP: Total of 6 processors activated. [ 0.165943] CPU features: detected: Privileged Access Never [ 0.165965] CPU features: detected: LSE atomic instructions [ 0.165979] CPU features: detected: User Access Override [ 0.165994] CPU features: detected: 32-bit EL0 Support [ 0.166007] CPU features: detected: RAS Extension Support [ 0.166020] CPU features: detected: CRC32 instructions [ 0.166033] CPU features: detected: 32-bit EL1 Support [ 0.229720] CPU: All CPU(s) started at EL2 [ 0.235112] devtmpfs: initialized [ 0.283546] Registered cp15_barrier emulation handler [ 0.283684] Registered setend emulation handler [ 0.283705] KASLR enabled [ 0.283973] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.284001] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.285350] pinctrl core: initialized pinctrl subsystem [ 0.286479] SMBIOS 3.0.0 present. [ 0.286527] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.287198] NET: Registered protocol family 16 [ 0.289159] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.289657] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.290418] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.290479] audit: initializing netlink subsys (disabled) [ 0.290756] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.291189] thermal_sys: Registered thermal governor 'step_wise' [ 0.291195] thermal_sys: Registered thermal governor 'power_allocator' [ 0.291209] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294614] cpuidle: using governor menu [ 0.294962] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295412] ASID allocator initialised with 32768 entries [ 0.295636] Serial: AMBA PL011 UART driver [ 0.299131] Tegra reboot handler registered. [ 0.363195] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.363387] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.363645] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.363722] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.363850] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.363897] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.364012] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.364056] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.364176] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.364223] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.366810] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.366855] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.366883] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.366926] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.366958] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.367021] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.367058] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.367087] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.367111] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.367135] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.367158] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.367181] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.367205] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.367228] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.367252] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.367275] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.367299] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.367391] mc-err: mcerr ops are set to t19x [ 0.379295] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.379318] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.379331] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.379343] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.386626] ACPI: Interpreter disabled. [ 0.388433] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.390518] iommu: Default domain type: Translated [ 0.390609] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.391201] SCSI subsystem initialized [ 0.391410] usbcore: registered new interface driver usbfs [ 0.391470] usbcore: registered new interface driver hub [ 0.391518] usbcore: registered new device driver usb [ 0.392503] mc: Linux media interface: v0.10 [ 0.392553] videodev: Linux video capture interface: v2.00 [ 0.393194] pps_core: LinuxPPS API ver. 1 registered [ 0.393216] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.393254] PTP clock support registered [ 0.393688] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.394138] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.394233] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.395432] Registered efivars operations [ 0.403835] FPGA manager framework [ 0.404010] Advanced Linux Sound Architecture Driver Initialized. [ 0.404817] Bluetooth: Core ver 2.22 [ 0.404898] NET: Registered protocol family 31 [ 0.404916] Bluetooth: HCI device and connection manager initialized [ 0.404937] Bluetooth: HCI socket layer initialized [ 0.404956] Bluetooth: L2CAP socket layer initialized [ 0.404986] Bluetooth: SCO socket layer initialized [ 0.407002] camchar: rtcpu character device driver loaded [ 0.407941] clocksource: Switched to clocksource arch_sys_counter [ 0.812937] VFS: Disk quotas dquot_6.6.0 [ 0.813044] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.813541] pnp: PnP ACPI: disabled [ 0.826712] la/ptsa driver initialized. [ 0.826850] NET: Registered protocol family 2 [ 0.827085] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.834632] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.834828] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.835205] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.835832] TCP: Hash tables configured (established 65536 bind 65536) [ 0.836032] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.836178] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.836501] NET: Registered protocol family 1 [ 0.837444] RPC: Registered named UNIX socket transport module. [ 0.837506] RPC: Registered udp transport module. [ 0.837526] RPC: Registered tcp transport module. [ 0.837545] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.837576] PCI: CLS 0 bytes, default 64 [ 0.837870] Trying to unpack rootfs image as initramfs... [ 1.099242] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.102614] Freeing initrd memory: 8196K [ 1.107902] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.107991] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.108045] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.108557] kvm [1]: IPA Size Limit: 40 bits [ 1.109102] kvm [1]: vgic interrupt IRQ9 [ 1.109634] kvm [1]: VHE mode initialized successfully [ 1.111128] Initialise system trusted keyrings [ 1.111399] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.117360] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.118204] NFS: Registering the id_resolver key type [ 1.118240] Key type id_resolver registered [ 1.118255] Key type id_legacy registered [ 1.118342] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.118365] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.118401] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.128693] NET: Registered protocol family 38 [ 1.128720] Key type asymmetric registered [ 1.128736] Asymmetric key parser 'x509' registered [ 1.128799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.129069] io scheduler mq-deadline registered [ 1.129087] io scheduler kyber registered [ 1.135035] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.137988] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.138071] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.138145] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.138246] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.138320] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.143663] scrncapt: init (heads:4 wins:6 planes:4) [ 1.144071] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.145013] EINJ: ACPI disabled. [ 1.148267] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.148291] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.148306] tegra-pmc: ### PMC reset level: L1 [ 1.148320] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.148404] tegra-pmc: PMC Prod config success [ 1.153540] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.158515] random: fast init done [ 1.159422] printk: console [ttyTCU0] enabled [ 2.711092] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.715380] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.719944] arm-smmu 10000000.iommu: stage 1 translation [ 2.725407] arm-smmu 10000000.iommu: stage 2 translation [ 2.731171] arm-smmu 10000000.iommu: nested translation [ 2.736254] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.743716] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.753214] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.756813] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.763115] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.771066] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.776155] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.781138] arm-smmu 12000000.iommu: stage 1 translation [ 2.786650] arm-smmu 12000000.iommu: stage 2 translation [ 2.792073] arm-smmu 12000000.iommu: nested translation [ 2.797500] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.804685] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.814046] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.817809] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.824104] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.831788] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.841211] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.844507] tegra_profiler: auth: init [ 2.849036] THERMAL EST: found 3 subdevs [ 2.852199] THERMAL EST num_resources: 0 [ 2.856043] [THERMAL EST subdev 0] [ 2.859601] [THERMAL EST subdev 1] [ 2.862777] [THERMAL EST subdev 2] [ 2.866283] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.872486] THERMAL EST: thz register success. [ 2.876976] THERMAL EST: end of probe, return err: 0 [ 2.882004] nvsciipc: loaded module [ 2.889472] tun: Universal TUN/TAP device driver, 1.6 [ 2.891837] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.898046] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.903351] e1000e: Intel(R) PRO/1000 Network Driver [ 2.908534] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.914365] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.919910] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.926145] PPP generic driver version 2.4.2 [ 2.930368] PPP BSD Compression module registered [ 2.934632] PPP Deflate Compression module registered [ 2.939879] PPP MPPE Compression module registered [ 2.945156] usbcore: registered new interface driver r8152 [ 2.950401] usbcore: registered new interface driver asix [ 2.955991] usbcore: registered new interface driver ax88179_178a [ 2.961868] usbcore: registered new interface driver cdc_ether [ 2.968062] usbcore: registered new interface driver net1080 [ 2.973406] usbcore: registered new interface driver cdc_subset [ 2.979449] usbcore: registered new interface driver zaurus [ 2.985442] usbcore: registered new interface driver cdc_ncm [ 2.991077] usbcore: registered new interface driver aqc111 [ 2.996737] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.002531] ohci-pci: OHCI PCI platform driver [ 3.007118] ohci-platform: OHCI generic platform driver [ 3.012798] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.019172] usbcore: registered new interface driver uas [ 3.023179] usbcore: registered new interface driver usb-storage [ 3.029312] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.035272] mousedev: PS/2 mouse device common for all mice [ 3.040540] usbcore: registered new interface driver xpad [ 3.048515] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.050994] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.058811] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.065336] i2c /dev entries driver [ 3.068998] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.074475] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.080074] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.085462] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.090573] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.096080] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.101797] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.115277] device-mapper: uevent: version 1.0.3 [ 3.115696] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.122335] cpuidle: Initializing cpuidle driver [ 3.126587] sdhci: Secure Digital Host Controller Interface driver [ 3.130917] sdhci: Copyright(c) Pierre Ossman [ 3.134991] Synopsys Designware Multimedia Card Interface Driver [ 3.140947] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.146941] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.147744] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.160322] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.184276] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.194071] vdd-1v0: supplied by regulator-dummy [ 3.199523] vdd-1v8-hs: supplied by regulator-dummy [ 3.204435] vdd-1v8-ls: supplied by regulator-dummy [ 3.209265] vdd-1v8-ao: supplied by regulator-dummy [ 3.213156] vddio-ddr-1v1: supplied by regulator-dummy [ 3.217712] vdd-rtc: supplied by regulator-dummy [ 3.219455] spmic-ldo1: supplied by regulator-dummy [ 3.220728] vdd-ao-3v3: supplied by regulator-dummy [ 3.227065] vddio-emmc-3v3: supplied by regulator-dummy [ 3.233404] spmic-ldo4: supplied by regulator-dummy [ 3.234709] vdd-usb-3v3: supplied by regulator-dummy [ 3.241055] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.247226] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.252804] spmic-ldo8: supplied by vdd-1v8-ls [ 3.254224] gpio-510 (gpio_default): hogged as output/high [ 3.255595] gpio-511 (gpio_default): hogged as output/high [ 3.258546] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.394305] max77686-rtc max77620-rtc: registered as rtc0 [ 3.395340] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.395661] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.215046] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.216216] hid: raw HID events driver (C) Jiri Kosina [ 4.217060] usbcore: registered new interface driver usbhid [ 4.217222] usbhid: USB HID core driver [ 4.219227] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.220607] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.034812] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.109111] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.108 ms) ÿá[ 4.305103] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.305747] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.306679] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.307354] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.308954] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.309590] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.310346] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.311782] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.312158] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.314855] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.321726] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.327603] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.333064] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.339025] denver_knobs_init:MTS_VERSION:55637613 [ 4.351829] t19x_cache tegra-cache: probed [ 4.354928] optee: probing for conduit method. [ 4.355749] optee: revision 3.16 (65cc2218) [ 4.356918] optee: dynamic shared memory is enabled [ 4.360232] optee: initialized driver [ 4.367026] nvpmodel: initialized successfully [ 4.367576] tegra_hv: get_hvd: not initialized yet [ 4.372359] user_ivc_mempool: hypervisor not present [ 4.377984] usbcore: registered new interface driver snd-usb-audio [ 4.384364] u32 classifier [ 4.385833] input device check on [ 4.389538] Actions configured [ 4.393510] Initializing XFRM netlink socket [ 4.398422] NET: Registered protocol family 10 [ 4.405314] Segment Routing with IPv6 [ 4.405630] NET: Registered protocol family 17 [ 4.409760] NET: Registered protocol family 15 [ 4.414449] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.427754] Bluetooth: RFCOMM socket layer initialized [ 4.432711] Bluetooth: RFCOMM ver 1.11 [ 4.436400] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.442439] Bluetooth: HIDP socket layer initialized [ 4.448207] 9pnet: Installing 9P2000 support [ 4.451783] Key type dns_resolver registered [ 4.457083] registered taskstats version 1 [ 4.460325] Loading compiled-in X.509 certificates [ 4.472636] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.476086] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.486025] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.488275] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.496768] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.504904] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.620117] tegra194-pcie 14160000.pcie: Link up [ 4.622927] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.623139] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.623302] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.623571] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.623836] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.624253] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.624677] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.637704] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.638209] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.638743] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.640270] pci 0004:01:00.0: supports D1 D2 [ 4.640459] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.648689] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.648973] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.649275] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.649692] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.649956] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.650122] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.654735] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.662044] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.670827] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.680839] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.685862] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.690748] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.697816] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.706842] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.708866] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.717067] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.725759] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.840992] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.841608] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.841867] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.842018] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.842412] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.842601] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.842998] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.843506] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.864520] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.865047] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.866745] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.868301] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.869639] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.871037] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.872231] pci 0005:00:00.0: Removing from iommu group 7 [ 5.872541] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.907273] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.932147] host1x 13e10000.host1x: initialized [ 5.933865] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.934835] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.936477] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.937287] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.938683] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.939354] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.940762] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.941558] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.942529] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.943317] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.951248] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.958257] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.968140] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.974929] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.984844] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.992175] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.002116] falcon 15340000.vic: Adding to iommu group 17 [ 6.016638] falcon 15340000.vic: initialized [ 6.017718] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.023227] falcon 15380000.nvjpg: initialized [ 6.023811] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.035474] falcon 154c0000.nvenc: initialized [ 6.036265] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.045110] falcon 15a80000.nvenc1: initialized [ 6.045706] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.057708] nvdec 15480000.nvdec: initialized [ 6.058431] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.068457] nvdec 15140000.nvdec1: initialized [ 6.069015] tsec 15500000.tsec: Adding to iommu group 18 [ 6.075248] tsec 15500000.tsec: initialized [ 6.075818] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.083003] tsec 15100000.tsecb: initialized [ 6.087063] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.116188] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.127901] gpio-374 (wifi-enable): hogged as output/high [ 6.128311] gpio-431 (camera-control-output-low): hogged as output/low [ 6.128635] gpio-432 (camera-control-output-low): hogged as output/low [ 6.130212] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.132207] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.132916] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.134521] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.139022] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.144459] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.150095] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.158512] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.165692] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.177370] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.182436] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.188223] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.196852] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.206068] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.213310] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.220845] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.227395] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.236911] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.243314] pva 16000000.pva0: Adding to iommu group 22 [ 6.270140] pva 16000000.pva0: initialized [ 6.274645] pva 16800000.pva1: Adding to iommu group 23 [ 6.286322] pva 16800000.pva1: initialized [ 6.291068] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.305194] nvdla 15880000.nvdla0: initialized [ 6.306559] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.323160] nvdla 158c0000.nvdla1: initialized [ 6.327523] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.327810] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.328021] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.328166] tegradc 15200000.display: Adding to iommu group 26 [ 6.328424] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.328754] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.329785] tegradccommon 15200000.display-hub: dma mapping done [ 6.330586] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.332309] tegra_cec 3960000.tegra_cec: probed [ 6.336689] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.336719] tegradc 15210000.display: Adding to iommu group 26 [ 6.337627] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.343782] generic_infoframe_type: 0x87 [ 6.349650] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.351451] random: crng init done [ 6.355412] tegradc 15200000.display: DT parsed successfully [ 6.361202] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.365002] tegradc 15200000.display: Display dc.0000000023071417 registered with id=0 [ 6.368666] kfuse 3830000.kfuse: initialized [ 6.378402] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.381714] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.389013] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.389021] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.390322] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.393232] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.401509] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.408751] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.417539] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.437014] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.446107] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.451049] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.460496] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.481529] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.490944] tegradc 15210000.display: disp0 connected to head1->sor [ 6.498912] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.503789] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.510379] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.516871] tegradc 15210000.display: DT parsed successfully [ 6.531596] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.538176] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.548709] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.554418] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.562471] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.571228] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.578092] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.585547] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.592731] usb usb1: Product: xHCI Host Controller [ 6.597412] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.603664] usb usb1: SerialNumber: 3610000.xhci [ 6.609522] hub 1-0:1.0: USB hub found [ 6.612351] hub 1-0:1.0: 4 ports detected [ 6.616958] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.621695] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.629525] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.637374] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.645098] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.652336] usb usb2: Product: xHCI Host Controller [ 6.657343] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.663531] usb usb2: SerialNumber: 3610000.xhci [ 6.668821] hub 2-0:1.0: USB hub found [ 6.671709] hub 2-0:1.0: 4 ports detected [ 6.713043] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.718724] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.720482] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.720752] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.734522] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.735632] tegra194-cpufreq ccplex: probed with BWMGR [ 6.737023] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.737512] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.738006] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.739080] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.746860] tegra194-vi5 15c10000.vi: initialized [ 6.748244] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.749392] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.752200] mmc0: CQHCI version 5.10 [ 6.752418] generic_infoframe_type: 0x87 [ 6.758851] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.762137] tegradc 15200000.display: DT parsed successfully [ 6.765787] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.774304] tegradc 15200000.display: Display dc.000000007fe84fca registered with id=0 [ 6.779531] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.786995] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.793968] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.800765] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.808961] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.815817] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.839105] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.839167] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.844593] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.844603] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.851058] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.859006] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.863651] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.865040] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.879446] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.885871] nvethernet 2490000.ethernet: Macsec not supported [ 6.887247] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.896837] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.899432] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.902163] tegradc 15200000.display: probed [ 6.905820] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.942907] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.949658] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.951423] mmc0: Command Queue Engine enabled [ 6.957714] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.960756] mmc0: periodic cache flush enabled [ 6.960769] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.961377] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.968930] tegra-se-nvhost 15810000.se: initialized [ 6.971869] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.983100] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.999175] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.001556] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.015684] Console: switching to colour frame buffer device 240x67 [ 7.021516] tegradc 15200000.display: fb registered [ 7.026462] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.026521] tegra-se-nvhost 15820000.se: initialized [ 7.033001] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.038700] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.043230] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.049750] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.062061] tegra-se-nvhost 15830000.se: initialized [ 7.067578] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.073166] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.079404] tegra-se-nvhost 15840000.se: initialized [ 7.085254] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.091403] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.091747] tegra_actmon d230000.actmon: in actmon_register()... [ 7.098141] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.098145] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.098149] usb 1-2: Manufacturer: Generic [ 7.100284] hub 1-2:1.0: USB hub found [ 7.104621] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.112843] hub 1-2:1.0: 4 ports detected [ 7.116790] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.116963] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.118066] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.118074] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.118649] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.118652] Extcon AUX1(HDMI) enable [ 7.118768] tegradc 15210000.display: disp1 connected to head1->sor [ 7.118920] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.119007] tegradc 15210000.display: DT parsed successfully [ 7.119043] tegradc 15210000.display: Display dc.00000000772344de registered with id=1 [ 7.119133] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.119139] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.125784] tegradc 15210000.display: probed [ 7.130210] hvc_sysfs: hypervisor is not present [ 7.212842] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.232855] tegradc 15210000.display: fb registered [ 7.242452] ALSA device list: [ 7.242565] No soundcards found. [ 7.246331] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.251529] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.253429] Freeing unused kernel memory: 3968K [ 7.259428] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.269262] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.276112] Run /init as init process [ 7.277867] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.288358] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.288381] usb 2-3: Manufacturer: Generic [ 7.297233] tegradc 15210000.display: blank - powerdown ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.302759] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.302763] Extcon DP: HPD disabled [ 7.302766] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.302778] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.302783] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.302849] tegradc 15200000.display: blank - powerdown [ 7.308127] hub 2-3:1.0: USB hub found [ 7.309887] hub 2-3:1.0: 4 ports detected [ 7.350702] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.350707] Extcon AUX1(HDMI) disable [ 7.373951] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.374759] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.387832] tegradc 15200000.display: unblank [ 7.388019] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.389043] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.389232] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.392053] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.392059] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.395064] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.396874] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.400808] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.400812] Extcon AUX1(HDMI) enable [ 7.413624] tegradc 15200000.display: sync windows ret = 247 [ 7.464378] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.466599] Extcon HDMI: HPD enabled [ 7.469958] tegradc 15200000.display: hdmi: plugged [ 7.515499] Root device found: mmcblk0p1 [ 7.518915] Found dev node: /dev/mmcblk0p1 [ 7.545210] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.546628] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.547972] usb 1-3: Product: Bluetooth Radio [ 7.549201] usb 1-3: Manufacturer: Realtek [ 7.550448] usb 1-3: SerialNumber: 00e04c000001 [ 7.555348] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.561102] Rootfs mounted over mmcblk0p1 [ 7.598673] Switching from initrd to actual rootfs [ 7.750174] systemd[1]: System time before build time, advancing clock. [ 7.821496] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.826434] systemd[1]: Detected architecture arm64. [ 7.871820] systemd[1]: Set hostname to . [ 8.041233] systemd-sysv-generator[255]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.387663] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.389421] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.395271] systemd[1]: Created slice system-modprobe.slice. [ 8.400055] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.404186] systemd[1]: Created slice User and Session Slice. [ 8.407602] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.411846] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.415322] systemd[1]: Reached target User and Group Name Lookups. [ 8.418538] systemd[1]: Reached target Slices. [ 8.421621] systemd[1]: Reached target Swap. [ 8.425647] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.429312] systemd[1]: Listening on Syslog Socket. [ 8.432927] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.436306] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.440534] systemd[1]: Listening on Journal Audit Socket. [ 8.444136] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.447912] systemd[1]: Listening on Journal Socket. [ 8.451712] systemd[1]: Listening on udev Control Socket. [ 8.455212] systemd[1]: Listening on udev Kernel Socket. [ 8.463752] systemd[1]: Mounting Huge Pages File System... [ 8.473301] systemd[1]: Mounting POSIX Message Queue File System... [ 8.482900] systemd[1]: Mounting RPC Pipe File System... [ 8.491378] systemd[1]: Mounting Kernel Debug File System... [ 8.500163] systemd[1]: Mounting Kernel Trace File System... [ 8.510534] systemd[1]: Starting Journal Service... [ 8.522018] systemd[1]: Starting Set the console keyboard layout... [ 8.531766] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.535450] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.542262] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.551519] systemd[1]: Started Nameserver information manager. [ 8.556468] systemd[1]: Reached target Network (Pre). [ 8.563728] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.565747] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.574664] systemd[1]: Starting Load Kernel Modules... [ 8.582786] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.590882] systemd[1]: Starting udev Coldplug all Devices... [ 8.602202] systemd[1]: Mounted Huge Pages File System. [ 8.606016] systemd[1]: Mounted POSIX Message Queue File System. [ 8.609738] systemd[1]: Mounted RPC Pipe File System. [ 8.612699] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.613542] systemd[1]: Mounted Kernel Debug File System. [ 8.620240] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.621779] systemd[1]: Mounted Kernel Trace File System. [ 8.622526] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.624858] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.624873] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.624877] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.625163] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.626579] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.632842] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.632852] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.641142] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.647028] systemd[1]: nvfb-udev.service: Succeeded. [ 8.651449] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.662119] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.667403] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.669246] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.680905] systemd[1]: Starting Load/Save Random Seed... [ 8.690771] systemd[1]: Starting Create System Users... [ 8.729979] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.729979] [ 8.739974] systemd[1]: Finished Load/Save Random Seed. [ 8.753724] systemd[1]: Finished Create System Users. [ 8.762462] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.770201] systemd[1]: Finished Load Kernel Modules. [ 8.774827] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.781745] systemd[1]: Mounting Kernel Configuration File System... [ 8.791355] systemd[1]: Started OP-TEE Client Supplicant. [ 8.800096] systemd[1]: Starting Apply Kernel Variables... [ 8.811086] systemd[1]: Finished Set the console keyboard layout. [ 8.815870] systemd[1]: Mounted Kernel Configuration File System. [ 8.831644] systemd[1]: Finished Create Static Device Nodes in /dev. [ 10.325030] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.335424] imx219 9-0010: board setup failed [ 10.335540] imx219: probe of 9-0010 failed with error -121 [ 10.352050] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.361581] imx219 10-0010: board setup failed [ 10.363165] imx219: probe of 10-0010 failed with error -121 [ 10.471729] hot-surface-alert cooling state: 0 -> 1 [ 11.033471] using random self ethernet address [ 11.034698] using random host ethernet address [ 11.938420] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.938426] Creating 1 MTD partitions on "spi6.0": [ 11.938433] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.542676] using random self ethernet address [ 12.544335] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.818269] nvidia: loading out-of-tree module taints kernel. [ 59.813484] watchdog: watchdog0: watchdog did not stop! [ 60.284869] Trying to unregister non-registered hwtime source [ 63.342966] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.344707] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeouÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNIÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäNG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.617] E> invalid display type [0003.618] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.647] I> edid read success [0003.647] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.648] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.649] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.681] I> width = 720, height = 480, frequency = 26973026 [0003.686] I> width = 720, height = 576, frequency = 26973026 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 4096, height = 2160, frequency = 296703296 [0003.721] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.732] I> hdmi_enable, starting HDMI initialisation [0003.737] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.747] calling apps_init() [0003.748] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000678] Console: colour dummy device 80x25 [ 0.002091] printk: console [tty0] enabled [ 0.002153] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002187] pid_max: default: 32768 minimum: 301 [ 0.002363] LSM: Security Framework initializing [ 0.002420] Yama: becoming mindful. [ 0.002462] SELinux: Initializing. [ 0.002608] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002645] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005767] rcu: Hierarchical SRCU implementation. [ 0.006068] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006777] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006826] DTB Build time: Aug 10 2022 20:31:49 [ 0.009527] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009793] Remapping and enabling EFI services. [ 0.011692] smp: Bringing up secondary CPUs ... [ 0.045099] Detected PIPT I-cache on CPU1 [ 0.045173] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074695] Detected PIPT I-cache on CPU2 [ 0.074845] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104552] Detected PIPT I-cache on CPU3 [ 0.104690] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134394] Detected PIPT I-cache on CPU4 [ 0.134589] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164392] Detected PIPT I-cache on CPU5 [ 0.164495] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164889] smp: Brought up 1 node, 6 CPUs [ 0.165096] SMP: Total of 6 processors activated. [ 0.165161] CPU features: detected: Privileged Access Never [ 0.165185] CPU features: detected: LSE atomic instructions [ 0.165200] CPU features: detected: User Access Override [ 0.165213] CPU features: detected: 32-bit EL0 Support [ 0.165226] CPU features: detected: RAS Extension Support [ 0.165238] CPU features: detected: CRC32 instructions [ 0.165251] CPU features: detected: 32-bit EL1 Support [ 0.236152] CPU: All CPU(s) started at EL2 [ 0.243148] devtmpfs: initialized [ 0.290802] Registered cp15_barrier emulation handler [ 0.290939] Registered setend emulation handler [ 0.290959] KASLR enabled [ 0.291329] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291354] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292707] pinctrl core: initialized pinctrl subsystem [ 0.293716] SMBIOS 3.0.0 present. [ 0.293744] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294409] NET: Registered protocol family 16 [ 0.296264] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296771] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297463] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297518] audit: initializing netlink subsys (disabled) [ 0.297750] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.298171] thermal_sys: Registered thermal governor 'step_wise' [ 0.298177] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298190] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300376] cpuidle: using governor menu [ 0.300736] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.301147] ASID allocator initialised with 32768 entries [ 0.301376] Serial: AMBA PL011 UART driver [ 0.304808] Tegra reboot handler registered. [ 0.375538] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375732] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.375947] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376038] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376198] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376239] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376353] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.376392] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376536] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376594] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379140] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379173] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.379200] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379226] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379271] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379297] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379335] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379367] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379391] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379414] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379436] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379458] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379480] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379503] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379525] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379547] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379571] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.379676] mc-err: mcerr ops are set to t19x [ 0.390988] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391011] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.391042] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391054] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399559] ACPI: Interpreter disabled. [ 0.401390] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.403061] iommu: Default domain type: Translated [ 0.403151] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.403671] SCSI subsystem initialized [ 0.403899] usbcore: registered new interface driver usbfs [ 0.403998] usbcore: registered new interface driver hub [ 0.404092] usbcore: registered new device driver usb [ 0.404781] mc: Linux media interface: v0.10 [ 0.404845] videodev: Linux video capture interface: v2.00 [ 0.405408] pps_core: LinuxPPS API ver. 1 registered [ 0.405465] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.405542] PTP clock support registered [ 0.405872] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.406316] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.406444] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.407299] Registered efivars operations [ 0.414776] FPGA manager framework [ 0.414916] Advanced Linux Sound Architecture Driver Initialized. [ 0.415718] Bluetooth: Core ver 2.22 [ 0.415805] NET: Registered protocol family 31 [ 0.415825] Bluetooth: HCI device and connection manager initialized [ 0.415870] Bluetooth: HCI socket layer initialized [ 0.415888] Bluetooth: L2CAP socket layer initialized [ 0.415945] Bluetooth: SCO socket layer initialized [ 0.417938] camchar: rtcpu character device driver loaded [ 0.419060] clocksource: Switched to clocksource arch_sys_counter [ 0.715640] VFS: Disk quotas dquot_6.6.0 [ 0.715710] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.716068] pnp: PnP ACPI: disabled [ 0.728674] la/ptsa driver initialized. [ 0.728853] NET: Registered protocol family 2 [ 0.729036] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.735137] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.735236] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.735532] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.735956] TCP: Hash tables configured (established 65536 bind 65536) [ 0.736070] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.736163] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.736358] NET: Registered protocol family 1 [ 0.737171] RPC: Registered named UNIX socket transport module. [ 0.737201] RPC: Registered udp transport module. [ 0.737219] RPC: Registered tcp transport module. [ 0.737236] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.737278] PCI: CLS 0 bytes, default 64 [ 0.737560] Trying to unpack rootfs image as initramfs... [ 1.009864] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.013221] Freeing initrd memory: 8196K [ 1.017666] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.017735] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.017798] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.018156] kvm [1]: IPA Size Limit: 40 bits [ 1.018666] kvm [1]: vgic interrupt IRQ9 [ 1.019255] kvm [1]: VHE mode initialized successfully [ 1.020892] Initialise system trusted keyrings [ 1.021285] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.027431] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.028271] NFS: Registering the id_resolver key type [ 1.028306] Key type id_resolver registered [ 1.028320] Key type id_legacy registered [ 1.028433] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.028457] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.028498] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.039252] NET: Registered protocol family 38 [ 1.039276] Key type asymmetric registered [ 1.039290] Asymmetric key parser 'x509' registered [ 1.039367] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.039644] io scheduler mq-deadline registered [ 1.039663] io scheduler kyber registered [ 1.045567] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.048327] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.048411] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.048480] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.048546] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.048620] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.054129] scrncapt: init (heads:4 wins:6 planes:4) [ 1.054210] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.055281] EINJ: ACPI disabled. [ 1.058084] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.058106] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.058116] tegra-pmc: ### PMC reset level: L1 [ 1.058125] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.058162] tegra-pmc: PMC Prod config success [ 1.064299] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.070715] random: fast init done [ 2.616270] printk: console [ttyTCU0] enabled [ 2.622646] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.626885] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.631418] arm-smmu 10000000.iommu: stage 1 translation [ 2.636932] arm-smmu 10000000.iommu: stage 2 translation [ 2.642444] arm-smmu 10000000.iommu: nested translation [ 2.647822] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.654961] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.667222] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.668058] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.674644] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.682845] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.687684] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.692673] arm-smmu 12000000.iommu: stage 1 translation [ 2.697917] arm-smmu 12000000.iommu: stage 2 translation [ 2.703598] arm-smmu 12000000.iommu: nested translation [ 2.709038] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.715956] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.727973] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.729046] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.735889] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.743345] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.753557] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.756338] tegra_profiler: auth: init [ 2.760324] THERMAL EST: found 3 subdevs [ 2.763995] THERMAL EST num_resources: 0 [ 2.767580] [THERMAL EST subdev 0] [ 2.770878] [THERMAL EST subdev 1] [ 2.774313] [THERMAL EST subdev 2] [ 2.777562] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.784314] THERMAL EST: thz register success. [ 2.788529] THERMAL EST: end of probe, return err: 0 [ 2.793609] nvsciipc: loaded module [ 2.801182] tun: Universal TUN/TAP device driver, 1.6 [ 2.803301] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.809307] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.814909] e1000e: Intel(R) PRO/1000 Network Driver [ 2.820130] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.826153] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.831195] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.837360] PPP generic driver version 2.4.2 [ 2.841891] PPP BSD Compression module registered [ 2.846203] PPP Deflate Compression module registered [ 2.851448] PPP MPPE Compression module registered [ 2.856678] usbcore: registered new interface driver r8152 [ 2.862187] usbcore: registered new interface driver asix [ 2.867524] usbcore: registered new interface driver ax88179_178a [ 2.873665] usbcore: registered new interface driver cdc_ether [ 2.879362] usbcore: registered new interface driver net1080 [ 2.885216] usbcore: registered new interface driver cdc_subset [ 2.890975] usbcore: registered new interface driver zaurus [ 2.896938] usbcore: registered new interface driver cdc_ncm [ 2.902609] usbcore: registered new interface driver aqc111 [ 2.907981] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.914097] ohci-pci: OHCI PCI platform driver [ 2.918619] ohci-platform: OHCI generic platform driver [ 2.924387] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.930936] usbcore: registered new interface driver uas [ 2.934925] usbcore: registered new interface driver usb-storage [ 2.940817] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.947221] mousedev: PS/2 mouse device common for all mice [ 2.951817] usbcore: registered new interface driver xpad [ 2.959955] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.962800] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.970372] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.977209] i2c /dev entries driver [ 2.980533] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.986408] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.991417] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.997122] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.002187] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.007975] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.013325] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.027550] device-mapper: uevent: version 1.0.3 [ 3.028001] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.033793] cpuidle: Initializing cpuidle driver [ 3.037624] sdhci: Secure Digital Host Controller Interface driver [ 3.042419] sdhci: Copyright(c) Pierre Ossman [ 3.046259] Synopsys Designware Multimedia Card Interface Driver [ 3.052702] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.058384] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.059197] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.071817] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.094346] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.104558] vdd-1v0: supplied by regulator-dummy [ 3.110251] vdd-1v8-hs: supplied by regulator-dummy [ 3.115195] vdd-1v8-ls: supplied by regulator-dummy [ 3.120197] vdd-1v8-ao: supplied by regulator-dummy [ 3.124284] vddio-ddr-1v1: supplied by regulator-dummy [ 3.128908] vdd-rtc: supplied by regulator-dummy [ 3.130867] spmic-ldo1: supplied by regulator-dummy [ 3.132343] vdd-ao-3v3: supplied by regulator-dummy [ 3.138657] vddio-emmc-3v3: supplied by regulator-dummy [ 3.145102] spmic-ldo4: supplied by regulator-dummy [ 3.146437] vdd-usb-3v3: supplied by regulator-dummy [ 3.152785] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.159093] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.164885] spmic-ldo8: supplied by vdd-1v8-ls [ 3.166422] gpio-510 (gpio_default): hogged as output/high [ 3.167902] gpio-511 (gpio_default): hogged as output/high [ 3.170944] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.307182] max77686-rtc max77620-rtc: registered as rtc0 [ 3.308676] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.309037] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.181060] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.182302] hid: raw HID events driver (C) Jiri Kosina [ 4.183259] usbcore: registered new interface driver usbhid [ 4.183410] usbhid: USB HID core driver [ 4.185723] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.187314] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.143322] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.216994] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.480 ms) ÿá[ 4.271459] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.272049] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.273244] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.274009] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.275793] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.276452] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.277009] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.278631] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.278884] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.281550] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.287397] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.294232] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.299483] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.305558] denver_knobs_init:MTS_VERSION:55637613 [ 4.318228] t19x_cache tegra-cache: probed [ 4.321146] optee: probing for conduit method. [ 4.321992] optee: revision 3.16 (65cc2218) [ 4.323240] optee: dynamic shared memory is enabled [ 4.325947] optee: initialized driver [ 4.332595] nvpmodel: initialized successfully [ 4.333637] tegra_hv: get_hvd: not initialized yet [ 4.338445] user_ivc_mempool: hypervisor not present [ 4.344446] usbcore: registered new interface driver snd-usb-audio [ 4.350710] u32 classifier [ 4.352201] input device check on [ 4.356079] Actions configured [ 4.359658] Initializing XFRM netlink socket [ 4.364749] NET: Registered protocol family 10 [ 4.371448] Segment Routing with IPv6 [ 4.371728] NET: Registered protocol family 17 [ 4.375787] NET: Registered protocol family 15 [ 4.380183] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.393968] Bluetooth: RFCOMM socket layer initialized [ 4.398741] Bluetooth: RFCOMM ver 1.11 [ 4.402324] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.408439] Bluetooth: HIDP socket layer initialized [ 4.413993] 9pnet: Installing 9P2000 support [ 4.417614] Key type dns_resolver registered [ 4.423822] registered taskstats version 1 [ 4.426060] Loading compiled-in X.509 certificates [ 4.440723] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.442332] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.453180] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.453962] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.462938] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.471241] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.587126] tegra194-pcie 14160000.pcie: Link up [ 4.590097] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.590476] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.590718] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.591147] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.591449] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.591862] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.592358] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.605199] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.605672] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.606190] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.607961] pci 0004:01:00.0: supports D1 D2 [ 4.608227] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.620991] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.621436] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.621734] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.622191] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.622523] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.622718] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.623042] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.629223] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.637868] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.648168] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.652574] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.658554] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.665493] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.674956] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.675957] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.684350] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.692569] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.808407] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.809385] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.809625] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.809779] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.810027] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.810311] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.810707] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.811369] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.830644] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.830977] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.833109] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.834453] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.836329] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.837728] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.838714] pci 0005:00:00.0: Removing from iommu group 7 [ 5.839149] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.870915] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.893721] host1x 13e10000.host1x: initialized [ 5.895515] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.896390] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.897488] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.898133] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.899517] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.900178] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.901083] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.901705] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.902523] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.908589] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.918499] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.925333] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.935628] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.942578] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.952374] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.959631] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.969526] falcon 15340000.vic: Adding to iommu group 17 [ 5.984961] falcon 15340000.vic: initialized [ 5.985994] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.991485] falcon 15380000.nvjpg: initialized [ 5.992194] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.001924] falcon 154c0000.nvenc: initialized [ 6.002443] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.012224] falcon 15a80000.nvenc1: initialized [ 6.012809] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.024920] nvdec 15480000.nvdec: initialized [ 6.025545] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.034546] nvdec 15140000.nvdec1: initialized [ 6.035125] tsec 15500000.tsec: Adding to iommu group 18 [ 6.040778] tsec 15500000.tsec: initialized [ 6.041310] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.049322] tsec 15100000.tsecb: initialized [ 6.053502] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.077115] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.089415] gpio-374 (wifi-enable): hogged as output/high [ 6.089747] gpio-431 (camera-control-output-low): hogged as output/low [ 6.090036] gpio-432 (camera-control-output-low): hogged as output/low [ 6.092281] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.094371] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.094970] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.100561] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.106154] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.112017] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.117504] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.125388] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.133025] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.144758] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.149924] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.155781] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.164672] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.173942] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.181119] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.188931] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.195035] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.204851] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.211223] pva 16000000.pva0: Adding to iommu group 22 [ 6.238201] pva 16000000.pva0: initialized [ 6.244348] pva 16800000.pva1: Adding to iommu group 23 [ 6.255579] pva 16800000.pva1: initialized [ 6.260813] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.272945] nvdla 15880000.nvdla0: initialized [ 6.274635] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.283370] nvdla 158c0000.nvdla1: initialized [ 6.286055] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.286412] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.287222] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.287790] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.287837] tegradc 15200000.display: Adding to iommu group 26 [ 6.288120] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.288255] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.288350] tegradc 15210000.display: Adding to iommu group 26 [ 6.288775] tegradccommon 15200000.display-hub: dma mapping done [ 6.291616] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.291630] tegra_cec 3960000.tegra_cec: probed [ 6.292590] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.294741] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.329343] kfuse 3830000.kfuse: initialized [ 6.333810] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.340052] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.347225] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.353293] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.362574] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.367565] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.376942] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.382593] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.403240] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.403607] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.405707] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.413751] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.422584] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.428819] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.436747] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.443694] usb usb1: Product: xHCI Host Controller [ 6.448876] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.455174] usb usb1: SerialNumber: 3610000.xhci [ 6.460770] hub 1-0:1.0: USB hub found [ 6.463871] hub 1-0:1.0: 4 ports detected [ 6.468160] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.472890] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.480766] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.488269] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.496142] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.503584] usb usb2: Product: xHCI Host Controller [ 6.508358] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.514503] usb usb2: SerialNumber: 3610000.xhci [ 6.520495] hub 2-0:1.0: USB hub found [ 6.523221] hub 2-0:1.0: 4 ports detected [ 6.563777] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.570121] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.571693] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.571908] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.585371] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.586464] tegra194-cpufreq ccplex: probed with BWMGR [ 6.587706] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.588403] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.588979] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.590254] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.597713] tegra194-vi5 15c10000.vi: initialized [ 6.599505] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.600839] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.603466] generic_infoframe_type: 0x87 [ 6.609901] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.613721] tegradc 15200000.display: DT parsed successfully [ 6.621702] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.627438] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.627985] mmc0: CQHCI version 5.10 [ 6.633563] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.643883] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.645384] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.651959] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.657067] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.660429] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.667085] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.675230] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.675614] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.683069] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.689307] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.689773] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.695783] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.697384] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.704957] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.716088] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.718474] tegradc 15200000.display: probed [ 6.743865] mmc0: Command Queue Engine enabled [ 6.747874] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.755631] mmc0: periodic cache flush enabled [ 6.755662] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.755758] nvethernet 2490000.ethernet: Macsec not supported [ 6.757522] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.759209] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.759395] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.759577] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.761592] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.763525] tegra-se-nvhost 15810000.se: initialized [ 6.768204] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.777038] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.778838] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.783753] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.800932] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.804099] tegra-se-nvhost 15820000.se: initialized [ 6.871721] Console: switching to colour frame buffer device 240x67 [ 6.873308] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.877450] tegradc 15200000.display: fb registered [ 6.877517] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.884241] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.889599] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.895412] tegra-se-nvhost 15830000.se: initialized [ 6.900931] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.907652] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.924305] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.930589] tegra-se-nvhost 15840000.se: initialized [ 6.936420] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.938719] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.942582] tegra_actmon d230000.actmon: in actmon_register()... [ 6.949538] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.949544] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.949557] usb 1-2: Manufacturer: Generic [ 6.955239] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.964554] hub 1-2:1.0: USB hub found [ 6.967420] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.978053] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.980681] hub 1-2:1.0: 4 ports detected [ 6.981412] hvc_sysfs: hypervisor is not present [ 7.005731] random: crng init done [ 7.010848] ALSA device list: [ 7.012799] No soundcards found. [ 7.016855] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.023755] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.032307] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.038615] Extcon AUX1(HDMI) enable [ 7.042717] tegradc 15210000.display: disp1 connected to head1->sor [ 7.048650] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.055759] tegradc 15210000.display: DT parsed successfully [ 7.055923] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.061747] tegradc 15210000.display: Display dc.0000000007748698 registered with id=1 [ 7.077226] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 7.083235] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 7.096549] tegradc 15210000.display: probed [ 7.096884] tegradc 15210000.display: fb registered [ 7.101867] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.105390] Freeing unused kernel memory: 3968K [ 7.105838] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.110851] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.118596] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.132457] tegradc 15210000.display: blank - powerdown [ 7.132471] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.137410] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.137414] Extcon DP: HPD disabled [ 7.137418] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.137427] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.137436] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.144893] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.144996] Run /init as init process [ 7.184227] usb 2-3: Manufacturer: Generic [ 7.195423] hub 2-3:1.0: USB hub found [ 7.197412] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.200298] tegradc 15200000.display: blank - powerdown [ 7.223076] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.240561] Root device found: mmcblk0p1 [ 7.242672] Found dev node: /dev/mmcblk0p1 [ 7.245136] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.245142] Extcon AUX1(HDMI) disable [ 7.268548] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.269380] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.278233] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.282284] Rootfs mounted over mmcblk0p1 [ 7.283332] tegradc 15200000.display: unblank [ 7.284642] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.284857] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.290852] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.292799] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.296787] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.296791] Extcon AUX1(HDMI) enable [ 7.299065] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.309596] tegradc 15200000.display: sync windows ret = 247 [ 7.312406] Switching from initrd to actual rootfs [ 7.348212] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.349764] Extcon HDMI: HPD enabled [ 7.351136] tegradc 15200000.display: hdmi: plugged [ 7.363597] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.365085] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.372172] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.374065] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.381046] usb 1-3: Product: Bluetooth Radio [ 7.385635] usb 1-3: Manufacturer: Realtek [ 7.389484] usb 1-3: SerialNumber: 00e04c000001 [ 7.502774] systemd[1]: System time before build time, advancing clock. [ 7.581577] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.586495] systemd[1]: Detected architecture arm64. [ 7.625860] systemd[1]: Set hostname to . [ 7.796854] systemd-sysv-generator[260]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.149593] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.151379] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.156962] systemd[1]: Created slice system-modprobe.slice. [ 8.161737] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.166045] systemd[1]: Created slice User and Session Slice. [ 8.169574] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.173907] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.177476] systemd[1]: Reached target User and Group Name Lookups. [ 8.180904] systemd[1]: Reached target Slices. [ 8.184189] systemd[1]: Reached target Swap. [ 8.188463] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.192370] systemd[1]: Listening on Syslog Socket. [ 8.196195] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.199878] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.204331] systemd[1]: Listening on Journal Audit Socket. [ 8.208157] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.212168] systemd[1]: Listening on Journal Socket. [ 8.216060] systemd[1]: Listening on udev Control Socket. [ 8.219756] systemd[1]: Listening on udev Kernel Socket. [ 8.229950] systemd[1]: Mounting Huge Pages File System... [ 8.239932] systemd[1]: Mounting POSIX Message Queue File System... [ 8.248475] systemd[1]: Mounting RPC Pipe File System... [ 8.257367] systemd[1]: Mounting Kernel Debug File System... [ 8.266369] systemd[1]: Mounting Kernel Trace File System... [ 8.276650] systemd[1]: Starting Journal Service... [ 8.285992] systemd[1]: Starting Set the console keyboard layout... [ 8.294446] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.298131] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.305059] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.313199] systemd[1]: Started Nameserver information manager. [ 8.318313] systemd[1]: Reached target Network (Pre). [ 8.326018] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.328344] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.335695] systemd[1]: Starting Load Kernel Modules... [ 8.343624] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.351592] systemd[1]: Starting udev Coldplug all Devices... [ 8.362476] systemd[1]: Mounted Huge Pages File System. [ 8.366484] systemd[1]: Mounted POSIX Message Queue File System. [ 8.370397] systemd[1]: Mounted RPC Pipe File System. [ 8.372804] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.374959] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.377803] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.379625] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.380404] systemd[1]: Mounted Kernel Debug File System. [ 8.381216] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.384237] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.384642] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.387075] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.387611] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.390463] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.394732] systemd[1]: Mounted Kernel Trace File System. [ 8.401286] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.406315] systemd[1]: nvfb-udev.service: Succeeded. [ 8.410367] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.420916] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.426328] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.428354] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.442720] systemd[1]: Starting Load/Save Random Seed... [ 8.451396] systemd[1]: Starting Create System Users... [ 8.488221] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.488221] [ 8.499227] systemd[1]: Finished Load/Save Random Seed. [ 8.512188] systemd[1]: Finished Create System Users. [ 8.519495] systemd[1]: Finished Load Kernel Modules. [ 8.524147] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.531142] systemd[1]: Mounting Kernel Configuration File System... [ 8.540210] systemd[1]: Started OP-TEE Client Supplicant. [ 8.549139] systemd[1]: Starting Apply Kernel Variables... [ 8.558927] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.569941] systemd[1]: Finished Set the console keyboard layout. [ 8.574392] systemd[1]: Mounted Kernel Configuration File System. [ 10.021234] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.028635] imx219 9-0010: board setup failed [ 10.030034] imx219: probe of 9-0010 failed with error -121 [ 10.044232] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.049423] imx219 10-0010: board setup failed [ 10.050805] imx219: probe of 10-0010 failed with error -121 [ 10.089128] hot-surface-alert cooling state: 0 -> 1 [ 10.894678] using random self ethernet address [ 10.938741] using random host ethernet address [ 11.652551] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.654360] Creating 1 MTD partitions on "spi6.0": [ 11.656378] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.281170] using random self ethernet address [ 12.282899] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.881783] nvidia: loading out-of-tree module taints kernel. [ 29.611563] tegradc 15200000.display: sor_poll_register 0x16: timeout [ 29.611571] tegradc 15200000.display: dc timeout waiting for HEAD MODE = SLEEP [ 58.981004] watchdog: watchdog0: watchdog did not stop! [ 59.472030] Trying to unregister non-registered hwtime source [ 62.529982] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.531640] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿänalÿâadc initialized ÿä ÿâfmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNING: ÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäThis OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.419] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.607] W> set volts not configured for 'vdd-1v0' [0003.612] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.619] E> invalid display type [0003.620] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.649] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.650] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.723] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.739] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.749] calling apps_init() [0003.750] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000749] Console: colour dummy device 80x25 [ 0.002212] printk: console [tty0] enabled [ 0.002277] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002314] pid_max: default: 32768 minimum: 301 [ 0.002487] LSM: Security Framework initializing [ 0.002570] Yama: becoming mindful. [ 0.002611] SELinux: Initializing. [ 0.002820] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002858] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006002] rcu: Hierarchical SRCU implementation. [ 0.006288] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006944] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006994] DTB Build time: Aug 10 2022 20:31:49 [ 0.009571] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009943] Remapping and enabling EFI services. [ 0.012069] smp: Bringing up secondary CPUs ... [ 0.041492] Detected PIPT I-cache on CPU1 [ 0.041602] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073313] Detected PIPT I-cache on CPU2 [ 0.073461] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105879] Detected PIPT I-cache on CPU3 [ 0.105967] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135648] Detected PIPT I-cache on CPU4 [ 0.135800] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165563] Detected PIPT I-cache on CPU5 [ 0.165665] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166048] smp: Brought up 1 node, 6 CPUs [ 0.166202] SMP: Total of 6 processors activated. [ 0.166285] CPU features: detected: Privileged Access Never [ 0.166308] CPU features: detected: LSE atomic instructions [ 0.166321] CPU features: detected: User Access Override [ 0.166333] CPU features: detected: 32-bit EL0 Support [ 0.166345] CPU features: detected: RAS Extension Support [ 0.166357] CPU features: detected: CRC32 instructions [ 0.166370] CPU features: detected: 32-bit EL1 Support [ 0.236237] CPU: All CPU(s) started at EL2 [ 0.244422] devtmpfs: initialized [ 0.292350] Registered cp15_barrier emulation handler [ 0.292512] Registered setend emulation handler [ 0.292532] KASLR enabled [ 0.292790] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.292813] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.294216] pinctrl core: initialized pinctrl subsystem [ 0.295219] SMBIOS 3.0.0 present. [ 0.295250] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.295890] NET: Registered protocol family 16 [ 0.298003] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.298509] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.299228] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.299285] audit: initializing netlink subsys (disabled) [ 0.299587] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.299949] thermal_sys: Registered thermal governor 'step_wise' [ 0.299956] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299976] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.302263] cpuidle: using governor menu [ 0.302776] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.303268] ASID allocator initialised with 32768 entries [ 0.303531] Serial: AMBA PL011 UART driver [ 0.306930] Tegra reboot handler registered. [ 0.370703] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.370856] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.371069] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.371121] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.371252] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.371293] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.371407] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.371446] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.371561] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.371619] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.373921] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.373957] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.373985] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.374013] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.374043] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.374069] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.374106] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.374138] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.374163] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.374187] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.374211] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.374234] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.374257] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.374303] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.374328] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.374374] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.374398] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.374505] mc-err: mcerr ops are set to t19x [ 0.385906] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.385928] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.385941] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.385953] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.393420] ACPI: Interpreter disabled. [ 0.394643] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.396230] iommu: Default domain type: Translated [ 0.396307] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.396690] SCSI subsystem initialized [ 0.396868] usbcore: registered new interface driver usbfs [ 0.396910] usbcore: registered new interface driver hub [ 0.396945] usbcore: registered new device driver usb [ 0.397321] mc: Linux media interface: v0.10 [ 0.397349] videodev: Linux video capture interface: v2.00 [ 0.397654] pps_core: LinuxPPS API ver. 1 registered [ 0.397667] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.397687] PTP clock support registered [ 0.397905] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.398196] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.398280] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.398877] Registered efivars operations [ 0.404319] FPGA manager framework [ 0.404426] Advanced Linux Sound Architecture Driver Initialized. [ 0.405008] Bluetooth: Core ver 2.22 [ 0.405046] NET: Registered protocol family 31 [ 0.405058] Bluetooth: HCI device and connection manager initialized [ 0.405074] Bluetooth: HCI socket layer initialized [ 0.405090] Bluetooth: L2CAP socket layer initialized [ 0.405111] Bluetooth: SCO socket layer initialized [ 0.406466] camchar: rtcpu character device driver loaded [ 0.407127] clocksource: Switched to clocksource arch_sys_counter [ 0.809210] VFS: Disk quotas dquot_6.6.0 [ 0.809303] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.809676] pnp: PnP ACPI: disabled [ 0.822636] la/ptsa driver initialized. [ 0.822837] NET: Registered protocol family 2 [ 0.823040] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.830680] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.830870] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.831280] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.831908] TCP: Hash tables configured (established 65536 bind 65536) [ 0.832073] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.832237] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.832530] NET: Registered protocol family 1 [ 0.833304] RPC: Registered named UNIX socket transport module. [ 0.833325] RPC: Registered udp transport module. [ 0.833339] RPC: Registered tcp transport module. [ 0.833352] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.833373] PCI: CLS 0 bytes, default 64 [ 0.833685] Trying to unpack rootfs image as initramfs... [ 1.096307] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.099469] Freeing initrd memory: 8196K [ 1.104019] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.104056] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.104092] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.104480] kvm [1]: IPA Size Limit: 40 bits [ 1.105071] kvm [1]: vgic interrupt IRQ9 [ 1.105582] kvm [1]: VHE mode initialized successfully [ 1.106974] Initialise system trusted keyrings [ 1.107290] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.112781] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.113576] NFS: Registering the id_resolver key type [ 1.113610] Key type id_resolver registered [ 1.113625] Key type id_legacy registered [ 1.113707] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.113729] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.113775] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.123379] NET: Registered protocol family 38 [ 1.123401] Key type asymmetric registered [ 1.123416] Asymmetric key parser 'x509' registered [ 1.123490] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.123761] io scheduler mq-deadline registered [ 1.123784] io scheduler kyber registered [ 1.129420] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.132401] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.132482] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.132554] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.132622] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.132716] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.138196] scrncapt: init (heads:4 wins:6 planes:4) [ 1.138608] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.139516] EINJ: ACPI disabled. [ 1.142748] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.142775] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.142790] tegra-pmc: ### PMC reset level: L1 [ 1.142804] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.142885] tegra-pmc: PMC Prod config success [ 1.148222] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.153295] random: fast init done [ 1.153998] printk: console [ttyTCU0] enabled [ 2.705002] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.710246] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.714748] arm-smmu 10000000.iommu: stage 1 translation [ 2.719977] arm-smmu 10000000.iommu: stage 2 translation [ 2.725504] arm-smmu 10000000.iommu: nested translation [ 2.730824] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.738012] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.747157] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.751121] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.757682] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.765135] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.770743] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.775460] arm-smmu 12000000.iommu: stage 1 translation [ 2.781233] arm-smmu 12000000.iommu: stage 2 translation [ 2.786380] arm-smmu 12000000.iommu: nested translation [ 2.792065] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.798994] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.807770] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.812373] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.818691] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.826235] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.836023] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.839076] tegra_profiler: auth: init [ 2.843331] THERMAL EST: found 3 subdevs [ 2.846747] THERMAL EST num_resources: 0 [ 2.850871] [THERMAL EST subdev 0] [ 2.854209] [THERMAL EST subdev 1] [ 2.857604] [THERMAL EST subdev 2] [ 2.860870] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.867272] THERMAL EST: thz register success. [ 2.871539] THERMAL EST: end of probe, return err: 0 [ 2.876754] nvsciipc: loaded module [ 2.883035] tun: Universal TUN/TAP device driver, 1.6 [ 2.885787] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.892633] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.897928] e1000e: Intel(R) PRO/1000 Network Driver [ 2.903107] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.908918] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.914220] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.920306] PPP generic driver version 2.4.2 [ 2.924873] PPP BSD Compression module registered [ 2.929202] PPP Deflate Compression module registered [ 2.934451] PPP MPPE Compression module registered [ 2.939710] usbcore: registered new interface driver r8152 [ 2.944966] usbcore: registered new interface driver asix [ 2.950547] usbcore: registered new interface driver ax88179_178a [ 2.956670] usbcore: registered new interface driver cdc_ether [ 2.962383] usbcore: registered new interface driver net1080 [ 2.968223] usbcore: registered new interface driver cdc_subset [ 2.974003] usbcore: registered new interface driver zaurus [ 2.979713] usbcore: registered new interface driver cdc_ncm [ 2.985386] usbcore: registered new interface driver aqc111 [ 2.990991] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.997099] ohci-pci: OHCI PCI platform driver [ 3.001649] ohci-platform: OHCI generic platform driver [ 3.007088] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.013851] usbcore: registered new interface driver uas [ 3.017994] usbcore: registered new interface driver usb-storage [ 3.024053] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.029987] mousedev: PS/2 mouse device common for all mice [ 3.034849] usbcore: registered new interface driver xpad [ 3.042590] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.045862] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.053633] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.059796] i2c /dev entries driver [ 3.063492] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.068971] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.074585] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.079740] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.085295] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.090532] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.096202] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.108127] device-mapper: uevent: version 1.0.3 [ 3.108499] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.116139] cpuidle: Initializing cpuidle driver [ 3.120172] sdhci: Secure Digital Host Controller Interface driver [ 3.125458] sdhci: Copyright(c) Pierre Ossman [ 3.129555] Synopsys Designware Multimedia Card Interface Driver [ 3.135707] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.141738] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.142247] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.154929] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.172896] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.181581] vdd-1v0: supplied by regulator-dummy [ 3.186919] vdd-1v8-hs: supplied by regulator-dummy [ 3.191607] vdd-1v8-ls: supplied by regulator-dummy [ 3.196211] vdd-1v8-ao: supplied by regulator-dummy [ 3.199981] vddio-ddr-1v1: supplied by regulator-dummy [ 3.204266] vdd-rtc: supplied by regulator-dummy [ 3.205825] spmic-ldo1: supplied by regulator-dummy [ 3.206932] vdd-ao-3v3: supplied by regulator-dummy [ 3.212913] vddio-emmc-3v3: supplied by regulator-dummy [ 3.219081] spmic-ldo4: supplied by regulator-dummy [ 3.220174] vdd-usb-3v3: supplied by regulator-dummy [ 3.226438] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.232499] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.237803] spmic-ldo8: supplied by vdd-1v8-ls [ 3.239137] gpio-510 (gpio_default): hogged as output/high [ 3.241684] gpio-511 (gpio_default): hogged as output/high [ 3.248530] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.386769] max77686-rtc max77620-rtc: registered as rtc0 [ 3.387715] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.387990] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.081497] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.082698] hid: raw HID events driver (C) Jiri Kosina [ 4.083744] usbcore: registered new interface driver usbhid [ 4.083892] usbhid: USB HID core driver [ 4.086051] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.087255] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.874525] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.948938] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 75.224 ms) ÿá[ 4.171437] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.172074] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.173120] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.173971] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.175934] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.176633] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.177269] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.178718] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.179209] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.181367] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.187822] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.194025] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.198911] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.205724] denver_knobs_init:MTS_VERSION:55637613 [ 4.220275] t19x_cache tegra-cache: probed [ 4.224635] optee: probing for conduit method. [ 4.225513] optee: revision 3.16 (65cc2218) [ 4.226523] optee: dynamic shared memory is enabled [ 4.227764] optee: initialized driver [ 4.233060] nvpmodel: initialized successfully [ 4.234066] tegra_hv: get_hvd: not initialized yet [ 4.238856] user_ivc_mempool: hypervisor not present [ 4.244492] usbcore: registered new interface driver snd-usb-audio [ 4.251158] u32 classifier [ 4.252534] input device check on [ 4.256327] Actions configured [ 4.259783] Initializing XFRM netlink socket [ 4.264695] NET: Registered protocol family 10 [ 4.270774] Segment Routing with IPv6 [ 4.271985] NET: Registered protocol family 17 [ 4.276396] NET: Registered protocol family 15 [ 4.280888] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.294216] Bluetooth: RFCOMM socket layer initialized [ 4.299126] Bluetooth: RFCOMM ver 1.11 [ 4.302721] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.308861] Bluetooth: HIDP socket layer initialized [ 4.314449] 9pnet: Installing 9P2000 support [ 4.318015] Key type dns_resolver registered [ 4.323696] registered taskstats version 1 [ 4.326409] Loading compiled-in X.509 certificates [ 4.339885] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.342291] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.353420] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.354652] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.362989] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.371595] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.487295] tegra194-pcie 14160000.pcie: Link up [ 4.490404] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.490654] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.490881] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.491190] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.491511] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.491886] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.492333] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.504776] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.505319] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.505795] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.507494] pci 0004:01:00.0: supports D1 D2 [ 4.507650] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.518900] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.519406] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.519711] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.520145] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.520417] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.520624] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.521800] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.529253] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.538012] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.548670] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.552956] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.558447] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.565583] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.574904] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.575826] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.584168] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.592685] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.707962] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.708636] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.708823] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.709096] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.709453] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.709693] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.710073] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.710487] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.729658] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.729988] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.732030] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.733460] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.734974] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.737161] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.738127] pci 0005:00:00.0: Removing from iommu group 7 [ 5.738398] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.773789] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.798225] host1x 13e10000.host1x: initialized [ 5.800098] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.800884] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.802241] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.802869] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.804291] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.804892] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.805985] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.806607] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.807617] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.808160] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.818250] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.824875] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.835138] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.841871] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.851744] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.858774] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.869064] falcon 15340000.vic: Adding to iommu group 17 [ 5.884343] falcon 15340000.vic: initialized [ 5.885722] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.891585] falcon 15380000.nvjpg: initialized [ 5.892312] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.901951] falcon 154c0000.nvenc: initialized [ 5.902506] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.913411] falcon 15a80000.nvenc1: initialized [ 5.914015] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.924682] nvdec 15480000.nvdec: initialized [ 5.925241] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.935175] nvdec 15140000.nvdec1: initialized [ 5.935714] tsec 15500000.tsec: Adding to iommu group 18 [ 5.941733] tsec 15500000.tsec: initialized [ 5.942283] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.949462] tsec 15100000.tsecb: initialized [ 5.953663] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.981818] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.994545] gpio-374 (wifi-enable): hogged as output/high [ 5.994819] gpio-431 (camera-control-output-low): hogged as output/low [ 5.995198] gpio-432 (camera-control-output-low): hogged as output/low [ 5.996722] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.998758] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.999314] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.000732] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.005479] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.011368] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.016994] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.025513] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.032476] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.043857] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.049270] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.055253] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.063862] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.073090] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.080165] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.088218] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.094238] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.104486] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.110432] pva 16000000.pva0: Adding to iommu group 22 [ 6.138308] pva 16000000.pva0: initialized [ 6.143664] pva 16800000.pva1: Adding to iommu group 23 [ 6.155950] pva 16800000.pva1: initialized [ 6.159786] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.173500] nvdla 15880000.nvdla0: initialized [ 6.174697] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.191668] nvdla 158c0000.nvdla1: initialized [ 6.195774] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.195806] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.195840] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.196138] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.196144] tegradc 15200000.display: Adding to iommu group 26 [ 6.197230] tegradccommon 15200000.display-hub: dma mapping done [ 6.198160] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.198874] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.199855] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.204070] tegradc 15210000.display: Adding to iommu group 26 [ 6.204332] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.204491] generic_infoframe_type: 0x87 [ 6.204589] tegradc 15200000.display: DT parsed successfully [ 6.204683] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.205485] tegra_cec 3960000.tegra_cec: probed [ 6.209946] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.209957] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.209961] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.210906] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.210917] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.212271] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.219006] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.224620] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.237133] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.241100] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.248665] kfuse 3830000.kfuse: initialized [ 6.258604] tegradc 15210000.display: disp0 connected to head1->sor [ 6.265937] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.270994] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.276878] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.277567] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.287922] tegradc 15210000.display: DT parsed successfully [ 6.294464] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.300532] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.375374] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.379908] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.389043] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.394641] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.414651] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.415029] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.417974] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.426153] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.434656] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.441723] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.449132] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.456327] usb usb1: Product: xHCI Host Controller [ 6.460992] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.467324] usb usb1: SerialNumber: 3610000.xhci [ 6.473102] hub 1-0:1.0: USB hub found [ 6.475882] hub 1-0:1.0: 4 ports detected [ 6.480766] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.485256] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.492863] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.500528] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.508718] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.515736] usb usb2: Product: xHCI Host Controller [ 6.520925] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.527152] usb usb2: SerialNumber: 3610000.xhci [ 6.532497] hub 2-0:1.0: USB hub found [ 6.535352] hub 2-0:1.0: 4 ports detected [ 6.576367] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.582534] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.584151] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.584416] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.597626] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.598740] tegra194-cpufreq ccplex: probed with BWMGR [ 6.600017] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.600450] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.600919] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.602369] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.611903] mmc0: CQHCI version 5.10 [ 6.612976] tegra194-vi5 15c10000.vi: initialized [ 6.614474] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.615691] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.619547] generic_infoframe_type: 0x87 [ 6.625644] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.629673] tegradc 15200000.display: DT parsed successfully [ 6.637468] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.637477] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.637484] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.643348] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.649831] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.657202] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.657876] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.671113] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.677508] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.685688] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.685695] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.693185] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.701185] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.721693] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.737045] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.737309] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.750707] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.755106] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.760426] nvethernet 2490000.ethernet: Macsec not supported [ 6.768096] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.770393] tegradc 15200000.display: probed [ 6.793033] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.802340] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.806521] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.813523] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.822459] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.828108] tegra-se-nvhost 15810000.se: initialized [ 6.836494] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.838205] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.844406] tegra-se-nvhost 15820000.se: initialized [ 6.849263] Console: switching to colour frame buffer device 240x67 [ 6.850805] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.854850] tegradc 15200000.display: fb registered [ 6.854922] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.861778] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.867543] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.884463] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.890108] tegra-se-nvhost 15830000.se: initialized [ 6.891615] mmc0: Command Queue Engine enabled [ 6.896109] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.899292] mmc0: periodic cache flush enabled [ 6.905948] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.909738] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.916511] tegra-se-nvhost 15840000.se: initialized [ 6.922887] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.929251] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.932201] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.939792] tegra_actmon d230000.actmon: in actmon_register()... [ 6.948607] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.960736] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.961528] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.973691] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.973952] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.981387] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.990010] hvc_sysfs: hypervisor is not present [ 6.998419] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.999849] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.999853] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.999857] usb 1-2: Manufacturer: Generic [ 7.021681] hub 1-2:1.0: USB hub found [ 7.025795] Extcon AUX1(HDMI) enable [ 7.030484] hub 1-2:1.0: 4 ports detected [ 7.033358] tegradc 15210000.display: disp1 connected to head1->sor [ 7.043672] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.050766] tegradc 15210000.display: DT parsed successfully [ 7.056626] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.062199] ALSA device list: [ 7.064696] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.066776] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.067697] No soundcards found. [ 7.085222] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.087967] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.098092] tegradc 15210000.display: probed [ 7.103229] tegradc 15210000.display: fb registered [ 7.111311] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.115303] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.116130] Freeing unused kernel memory: 3968K [ 7.122850] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.132915] tegradc 15210000.display: blank - powerdown [ 7.134828] random: crng init done [ 7.137986] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.141561] Run /init as init process [ 7.149867] Extcon DP: HPD disabled [ 7.149871] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.149968] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.156982] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.183164] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.184765] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.192395] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.196984] usb 2-3: Manufacturer: Generic ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.201225] tegradc 15200000.display: blank - powerdown [ 7.207136] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.211995] hub 2-3:1.0: USB hub found [ 7.213812] hub 2-3:1.0: 4 ports detected [ 7.238636] Root device found: mmcblk0p1 [ 7.240671] Found dev node: /dev/mmcblk0p1 [ 7.249095] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.249100] Extcon AUX1(HDMI) disable [ 7.271721] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.271728] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.272461] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.273336] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.275948] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.280005] Rootfs mounted over mmcblk0p1 [ 7.285396] tegradc 15200000.display: unblank [ 7.286534] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.286734] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.291138] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.293039] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.294935] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.299135] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.299140] Extcon AUX1(HDMI) enable [ 7.311693] tegradc 15200000.display: sync windows ret = 247 [ 7.314963] Switching from initrd to actual rootfs [ 7.358163] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.365243] Extcon HDMI: HPD enabled [ 7.368585] tegradc 15200000.display: hdmi: plugged [ 7.440361] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.441754] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.443116] usb 1-3: Product: Bluetooth Radio [ 7.444398] usb 1-3: Manufacturer: Realtek [ 7.445666] usb 1-3: SerialNumber: 00e04c000001 [ 7.506943] systemd[1]: System time before build time, advancing clock. [ 7.576042] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.580892] systemd[1]: Detected architecture arm64. [ 7.626004] systemd[1]: Set hostname to . [ 7.791845] systemd-sysv-generator[258]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.146422] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.148169] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.153748] systemd[1]: Created slice system-modprobe.slice. [ 8.158275] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.162399] systemd[1]: Created slice User and Session Slice. [ 8.165758] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.169725] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.173129] systemd[1]: Reached target User and Group Name Lookups. [ 8.176290] systemd[1]: Reached target Slices. [ 8.179399] systemd[1]: Reached target Swap. [ 8.183494] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.187133] systemd[1]: Listening on Syslog Socket. [ 8.190583] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.193885] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.198255] systemd[1]: Listening on Journal Audit Socket. [ 8.201718] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.205277] systemd[1]: Listening on Journal Socket. [ 8.208821] systemd[1]: Listening on udev Control Socket. [ 8.212229] systemd[1]: Listening on udev Kernel Socket. [ 8.220215] systemd[1]: Mounting Huge Pages File System... [ 8.228713] systemd[1]: Mounting POSIX Message Queue File System... [ 8.238482] systemd[1]: Mounting RPC Pipe File System... [ 8.248421] systemd[1]: Mounting Kernel Debug File System... [ 8.257151] systemd[1]: Mounting Kernel Trace File System... [ 8.267470] systemd[1]: Starting Journal Service... [ 8.276500] systemd[1]: Starting Set the console keyboard layout... [ 8.284931] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.288334] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.294678] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.302961] systemd[1]: Started Nameserver information manager. [ 8.307097] systemd[1]: Reached target Network (Pre). [ 8.313627] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.313810] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.319944] systemd[1]: Starting Load Kernel Modules... [ 8.329454] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.338268] systemd[1]: Starting udev Coldplug all Devices... [ 8.348198] systemd[1]: Mounted Huge Pages File System. [ 8.351921] systemd[1]: Mounted POSIX Message Queue File System. [ 8.355638] systemd[1]: Mounted RPC Pipe File System. [ 8.358320] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.363208] systemd[1]: Mounted Kernel Debug File System. [ 8.364108] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.366889] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.366894] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.366902] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.366905] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.368736] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.368888] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.368897] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.369274] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.385741] systemd[1]: Mounted Kernel Trace File System. [ 8.393339] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.400542] systemd[1]: nvfb-udev.service: Succeeded. [ 8.404997] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.417399] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.429919] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.432291] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.439436] systemd[1]: Starting Load/Save Random Seed... [ 8.448691] systemd[1]: Starting Create System Users... [ 8.454321] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.454321] [ 8.486625] systemd[1]: Finished Load Kernel Modules. [ 8.490945] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.497316] systemd[1]: Mounting Kernel Configuration File System... [ 8.507499] systemd[1]: Started OP-TEE Client Supplicant. [ 8.515974] systemd[1]: Starting Apply Kernel Variables... [ 8.526147] systemd[1]: Finished Set the console keyboard layout. [ 8.533761] systemd[1]: Finished Load/Save Random Seed. [ 8.537776] systemd[1]: Mounted Kernel Configuration File System. [ 8.550427] systemd[1]: Finished Create System Users. [ 10.013035] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.019724] imx219 9-0010: board setup failed [ 10.021258] imx219: probe of 9-0010 failed with error -121 [ 10.062385] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.074614] imx219 10-0010: board setup failed [ 10.075930] imx219: probe of 10-0010 failed with error -121 [ 10.144267] hot-surface-alert cooling state: 0 -> 1 [ 10.814935] using random self ethernet address [ 10.892539] using random host ethernet address [ 11.616239] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.616245] Creating 1 MTD partitions on "spi6.0": [ 11.616255] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.371944] using random self ethernet address [ 12.373567] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.830114] nvidia: loading out-of-tree module taints kernel. [ 59.492879] watchdog: watchdog0: watchdog did not stop! [ 59.942506] Trying to unregister non-registered hwtime source [ 63.006523] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.008048] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.928] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.939] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.325] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized ÿä1ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä 03ÿâdmce initialized cvc initialized ÿä:23:20 UTC 20ÿâavfs_clk_mach_post initialized ÿä22 aÿâavfs_clk_platform_post initialized ÿäarcÿâcvc_late initialized regulator_post initialized ÿäh64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extrasentering main console loop ] _post initialized bpmp: init complete ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.469] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.478] I> fixed regulator driver initialized [0003.493] I> register 'maxim' power off handle [0003.496] I> virtual i2c enabled [0003.496] I> registered 'maxim,max20024' pmic [0003.497] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.497] I> Boot-device: QSPI [0003.498] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.645] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.647] I> width = 720, height = 480, frequency = 26973026 [0003.651] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.745] calling apps_init() [0003.746] starting app kernel_boot_app [0003.747] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000628] Console: colour dummy device 80x25 [ 0.002136] printk: console [tty0] enabled [ 0.002223] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002258] pid_max: default: 32768 minimum: 301 [ 0.002443] LSM: Security Framework initializing [ 0.002517] Yama: becoming mindful. [ 0.002578] SELinux: Initializing. [ 0.002730] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002775] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005620] rcu: Hierarchical SRCU implementation. [ 0.005864] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006549] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006598] DTB Build time: Aug 10 2022 20:31:49 [ 0.009363] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009629] Remapping and enabling EFI services. [ 0.012007] smp: Bringing up secondary CPUs ... [ 0.044887] Detected PIPT I-cache on CPU1 [ 0.044986] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.079485] Detected PIPT I-cache on CPU2 [ 0.079633] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.109155] Detected PIPT I-cache on CPU3 [ 0.109240] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.138907] Detected PIPT I-cache on CPU4 [ 0.138984] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.168526] Detected PIPT I-cache on CPU5 [ 0.168669] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.169010] smp: Brought up 1 node, 6 CPUs [ 0.169218] SMP: Total of 6 processors activated. [ 0.169283] CPU features: detected: Privileged Access Never [ 0.169304] CPU features: detected: LSE atomic instructions [ 0.169318] CPU features: detected: User Access Override [ 0.169330] CPU features: detected: 32-bit EL0 Support [ 0.169342] CPU features: detected: RAS Extension Support [ 0.169354] CPU features: detected: CRC32 instructions [ 0.169366] CPU features: detected: 32-bit EL1 Support [ 0.241553] CPU: All CPU(s) started at EL2 [ 0.247053] devtmpfs: initialized [ 0.295746] Registered cp15_barrier emulation handler [ 0.295868] Registered setend emulation handler [ 0.295891] KASLR enabled [ 0.296219] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.296246] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.297703] pinctrl core: initialized pinctrl subsystem [ 0.298609] SMBIOS 3.0.0 present. [ 0.298654] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.299223] NET: Registered protocol family 16 [ 0.301065] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.301586] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.302303] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.302356] audit: initializing netlink subsys (disabled) [ 0.302596] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.303017] thermal_sys: Registered thermal governor 'step_wise' [ 0.303023] thermal_sys: Registered thermal governor 'power_allocator' [ 0.303037] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.305131] cpuidle: using governor menu [ 0.305460] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.305792] ASID allocator initialised with 32768 entries [ 0.305985] Serial: AMBA PL011 UART driver [ 0.309059] Tegra reboot handler registered. [ 0.381004] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.381135] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.381306] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.381354] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.381475] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.381519] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.381651] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.381700] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.381853] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.381897] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.384432] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.384471] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.384502] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.384531] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.384578] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.384608] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.384649] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.384700] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.384727] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.384773] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.384801] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.384827] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.384861] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.384887] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.384913] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.384939] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.384966] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.385062] mc-err: mcerr ops are set to t19x [ 0.397676] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.397698] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.397711] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.397723] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.405288] ACPI: Interpreter disabled. [ 0.406492] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.407763] iommu: Default domain type: Translated [ 0.407832] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.408188] SCSI subsystem initialized [ 0.408362] usbcore: registered new interface driver usbfs [ 0.408405] usbcore: registered new interface driver hub [ 0.408443] usbcore: registered new device driver usb [ 0.408816] mc: Linux media interface: v0.10 [ 0.408847] videodev: Linux video capture interface: v2.00 [ 0.409144] pps_core: LinuxPPS API ver. 1 registered [ 0.409155] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.409192] PTP clock support registered [ 0.409400] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.409687] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.409764] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.410451] Registered efivars operations [ 0.416221] FPGA manager framework [ 0.416322] Advanced Linux Sound Architecture Driver Initialized. [ 0.416963] Bluetooth: Core ver 2.22 [ 0.417003] NET: Registered protocol family 31 [ 0.417016] Bluetooth: HCI device and connection manager initialized [ 0.417032] Bluetooth: HCI socket layer initialized [ 0.417069] Bluetooth: L2CAP socket layer initialized [ 0.417096] Bluetooth: SCO socket layer initialized [ 0.419242] camchar: rtcpu character device driver loaded [ 0.420129] clocksource: Switched to clocksource arch_sys_counter [ 0.861636] VFS: Disk quotas dquot_6.6.0 [ 0.861726] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.862183] pnp: PnP ACPI: disabled [ 0.875747] la/ptsa driver initialized. [ 0.875892] NET: Registered protocol family 2 [ 0.876098] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.883919] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.884102] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.884488] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.885134] TCP: Hash tables configured (established 65536 bind 65536) [ 0.885284] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.885446] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.885733] NET: Registered protocol family 1 [ 0.886608] RPC: Registered named UNIX socket transport module. [ 0.886630] RPC: Registered udp transport module. [ 0.886642] RPC: Registered tcp transport module. [ 0.886654] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.886675] PCI: CLS 0 bytes, default 64 [ 0.886881] Trying to unpack rootfs image as initramfs... [ 1.072860] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.075118] Freeing initrd memory: 8196K [ 1.078811] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.078883] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.078941] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.079348] kvm [1]: IPA Size Limit: 40 bits [ 1.079870] kvm [1]: vgic interrupt IRQ9 [ 1.080429] kvm [1]: VHE mode initialized successfully [ 1.082060] Initialise system trusted keyrings [ 1.082384] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.089276] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.090131] NFS: Registering the id_resolver key type [ 1.090169] Key type id_resolver registered [ 1.090187] Key type id_legacy registered [ 1.090281] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.090339] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.090381] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.100288] NET: Registered protocol family 38 [ 1.100311] Key type asymmetric registered [ 1.100327] Asymmetric key parser 'x509' registered [ 1.100371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.100569] io scheduler mq-deadline registered [ 1.100586] io scheduler kyber registered [ 1.106710] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.109969] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.110057] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.110143] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.110216] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.110288] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.115824] scrncapt: init (heads:4 wins:6 planes:4) [ 1.116069] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.117276] EINJ: ACPI disabled. [ 1.120764] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.120790] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.120839] tegra-pmc: ### PMC reset level: L1 [ 1.120853] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.120905] tegra-pmc: PMC Prod config success [ 1.126034] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.131325] random: fast init done [ 1.131998] printk: console [ttyTCU0] enabled [ 2.683792] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.688239] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.692883] arm-smmu 10000000.iommu: stage 1 translation [ 2.698251] arm-smmu 10000000.iommu: stage 2 translation [ 2.703500] arm-smmu 10000000.iommu: nested translation [ 2.709095] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.716011] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.726569] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.729138] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.735696] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.743897] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.748734] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.753715] arm-smmu 12000000.iommu: stage 1 translation [ 2.758969] arm-smmu 12000000.iommu: stage 2 translation [ 2.764649] arm-smmu 12000000.iommu: nested translation [ 2.769822] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.777257] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.787655] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.790123] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.796948] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.804468] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.813836] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.817117] tegra_profiler: auth: init [ 2.821421] THERMAL EST: found 3 subdevs [ 2.825035] THERMAL EST num_resources: 0 [ 2.828622] [THERMAL EST subdev 0] [ 2.832202] [THERMAL EST subdev 1] [ 2.835336] [THERMAL EST subdev 2] [ 2.838862] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.845090] THERMAL EST: thz register success. [ 2.849582] THERMAL EST: end of probe, return err: 0 [ 2.854651] nvsciipc: loaded module [ 2.861872] tun: Universal TUN/TAP device driver, 1.6 [ 2.864327] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.870611] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.875912] e1000e: Intel(R) PRO/1000 Network Driver [ 2.881113] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.886933] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.892231] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.898774] PPP generic driver version 2.4.2 [ 2.902633] PPP BSD Compression module registered [ 2.907202] PPP Deflate Compression module registered [ 2.912713] PPP MPPE Compression module registered [ 2.917467] usbcore: registered new interface driver r8152 [ 2.923244] usbcore: registered new interface driver asix [ 2.928308] usbcore: registered new interface driver ax88179_178a [ 2.934700] usbcore: registered new interface driver cdc_ether [ 2.940386] usbcore: registered new interface driver net1080 [ 2.946240] usbcore: registered new interface driver cdc_subset [ 2.952312] usbcore: registered new interface driver zaurus [ 2.958008] usbcore: registered new interface driver cdc_ncm [ 2.963395] usbcore: registered new interface driver aqc111 [ 2.969321] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.975109] ohci-pci: OHCI PCI platform driver [ 2.979691] ohci-platform: OHCI generic platform driver [ 2.985282] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.991800] usbcore: registered new interface driver uas [ 2.995976] usbcore: registered new interface driver usb-storage [ 3.001913] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.008051] mousedev: PS/2 mouse device common for all mice [ 3.013117] usbcore: registered new interface driver xpad [ 3.020798] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.023584] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.031646] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.038272] i2c /dev entries driver [ 3.041557] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.047296] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.052453] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.057834] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.063379] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.068883] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.074068] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.087589] device-mapper: uevent: version 1.0.3 [ 3.088025] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.094450] cpuidle: Initializing cpuidle driver [ 3.098559] sdhci: Secure Digital Host Controller Interface driver [ 3.103211] sdhci: Copyright(c) Pierre Ossman [ 3.107569] Synopsys Designware Multimedia Card Interface Driver [ 3.113507] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.119512] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.120462] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.132756] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.156611] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.166522] vdd-1v0: supplied by regulator-dummy [ 3.172176] vdd-1v8-hs: supplied by regulator-dummy [ 3.177084] vdd-1v8-ls: supplied by regulator-dummy [ 3.182047] vdd-1v8-ao: supplied by regulator-dummy [ 3.186081] vddio-ddr-1v1: supplied by regulator-dummy [ 3.190575] vdd-rtc: supplied by regulator-dummy [ 3.192487] spmic-ldo1: supplied by regulator-dummy [ 3.193824] vdd-ao-3v3: supplied by regulator-dummy [ 3.200079] vddio-emmc-3v3: supplied by regulator-dummy [ 3.206579] spmic-ldo4: supplied by regulator-dummy [ 3.207956] vdd-usb-3v3: supplied by regulator-dummy [ 3.214259] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.220719] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.226421] spmic-ldo8: supplied by vdd-1v8-ls [ 3.228026] gpio-510 (gpio_default): hogged as output/high [ 3.229422] gpio-511 (gpio_default): hogged as output/high [ 3.232379] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.368453] max77686-rtc max77620-rtc: registered as rtc0 [ 3.369836] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.370208] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.191707] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.192968] hid: raw HID events driver (C) Jiri Kosina [ 4.194001] usbcore: registered new interface driver usbhid [ 4.194150] usbhid: USB HID core driver [ 4.196317] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.197734] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.977298] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.051218] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.728 ms) ÿá[ 4.281891] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.282511] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.283535] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.284256] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.286060] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.286791] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.287556] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.289173] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.289427] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.292040] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.298202] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.304752] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.309864] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.315943] denver_knobs_init:MTS_VERSION:55637613 [ 4.328759] t19x_cache tegra-cache: probed [ 4.331677] optee: probing for conduit method. [ 4.332704] optee: revision 3.16 (65cc2218) [ 4.333723] optee: dynamic shared memory is enabled [ 4.336758] optee: initialized driver [ 4.343846] nvpmodel: initialized successfully [ 4.344593] tegra_hv: get_hvd: not initialized yet [ 4.348717] user_ivc_mempool: hypervisor not present [ 4.355019] usbcore: registered new interface driver snd-usb-audio [ 4.361148] u32 classifier [ 4.362495] input device check on [ 4.366337] Actions configured [ 4.370103] Initializing XFRM netlink socket [ 4.375103] NET: Registered protocol family 10 [ 4.382427] Segment Routing with IPv6 [ 4.382775] NET: Registered protocol family 17 [ 4.386604] NET: Registered protocol family 15 [ 4.390843] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.404641] Bluetooth: RFCOMM socket layer initialized [ 4.409330] Bluetooth: RFCOMM ver 1.11 [ 4.412955] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.419077] Bluetooth: HIDP socket layer initialized [ 4.425027] 9pnet: Installing 9P2000 support [ 4.428278] Key type dns_resolver registered [ 4.433972] registered taskstats version 1 [ 4.436679] Loading compiled-in X.509 certificates [ 4.449482] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.452852] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.462747] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.464624] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.473422] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.481541] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.596221] tegra194-pcie 14160000.pcie: Link up [ 4.599198] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.599382] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.599563] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.599790] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.600014] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.600531] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.600973] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.613676] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.614210] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.614779] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.616350] pci 0004:01:00.0: supports D1 D2 [ 4.616559] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.629085] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.629488] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.629755] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.630236] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.630673] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.630882] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.631103] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.638489] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.646673] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.657101] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.661825] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.667137] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.674162] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.683526] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.684891] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.693125] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.701808] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.817067] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.817676] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.818020] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.818253] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.818537] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.818750] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.819138] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.819566] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.839208] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.839605] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.841629] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.842801] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.844360] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.845877] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.846950] pci 0005:00:00.0: Removing from iommu group 7 [ 5.847214] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.881892] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.905172] host1x 13e10000.host1x: initialized [ 5.906855] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.907764] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.909091] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.909818] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.910890] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.911544] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.912789] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.913544] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.914530] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.916948] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.927330] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.934033] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.943954] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.951164] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.960798] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.967913] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.977775] falcon 15340000.vic: Adding to iommu group 17 [ 5.991705] falcon 15340000.vic: initialized [ 5.992544] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.998300] falcon 15380000.nvjpg: initialized [ 5.998884] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.010574] falcon 154c0000.nvenc: initialized [ 6.011256] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.021156] falcon 15a80000.nvenc1: initialized [ 6.021788] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.033557] nvdec 15480000.nvdec: initialized [ 6.034122] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.042851] nvdec 15140000.nvdec1: initialized [ 6.043316] tsec 15500000.tsec: Adding to iommu group 18 [ 6.049884] tsec 15500000.tsec: initialized [ 6.050393] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.058702] tsec 15100000.tsecb: initialized [ 6.062500] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.087932] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.099957] gpio-374 (wifi-enable): hogged as output/high [ 6.100335] gpio-431 (camera-control-output-low): hogged as output/low [ 6.100651] gpio-432 (camera-control-output-low): hogged as output/low [ 6.102598] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.104286] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.104873] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.109591] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.114770] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.121042] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.126132] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.134522] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.141649] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.153012] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.158529] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.164364] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.173044] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.182509] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.189991] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.197556] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.203569] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.213300] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.219546] pva 16000000.pva0: Adding to iommu group 22 [ 6.246365] pva 16000000.pva0: initialized [ 6.250895] pva 16800000.pva1: Adding to iommu group 23 [ 6.261595] pva 16800000.pva1: initialized [ 6.265347] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.279404] nvdla 15880000.nvdla0: initialized [ 6.280866] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.297465] nvdla 158c0000.nvdla1: initialized [ 6.299777] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.299973] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.300317] tegradccommon 15200000.display-hub: dma mapping done [ 6.302186] tegradc 15200000.display: Adding to iommu group 26 [ 6.309963] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.310296] generic_infoframe_type: 0x87 [ 6.310490] tegradc 15200000.display: DT parsed successfully [ 6.310748] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.313069] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.315251] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.315385] tegradc 15210000.display: Adding to iommu group 26 [ 6.325431] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.327518] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.333388] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.341204] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.347455] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.355487] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.361116] tegra_cec 3960000.tegra_cec: probed [ 6.370127] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.374441] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.379441] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.393673] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.393770] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.406448] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.409498] kfuse 3830000.kfuse: initialized [ 6.417130] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.421238] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.431104] tegradc 15210000.display: disp0 connected to head1->sor [ 6.433948] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.434760] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.440974] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.447492] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.453244] tegradc 15210000.display: DT parsed successfully [ 6.461513] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.468680] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.489138] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.498131] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.503816] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.523832] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.524360] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.527055] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.535246] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.543678] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.550543] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.557937] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.565124] usb usb1: Product: xHCI Host Controller [ 6.570468] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.576738] usb usb1: SerialNumber: 3610000.xhci [ 6.582913] hub 1-0:1.0: USB hub found [ 6.585431] hub 1-0:1.0: 4 ports detected [ 6.589824] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.594382] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.601993] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.609638] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.617571] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.622787] random: crng init done [ 6.624929] usb usb2: Product: xHCI Host Controller [ 6.633073] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.639329] usb usb2: SerialNumber: 3610000.xhci [ 6.645127] hub 2-0:1.0: USB hub found [ 6.647779] hub 2-0:1.0: 4 ports detected [ 6.690223] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.696671] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.698147] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.698389] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.711777] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.712835] tegra194-cpufreq ccplex: probed with BWMGR [ 6.714245] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.714853] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.715261] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.716511] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.723931] tegra194-vi5 15c10000.vi: initialized [ 6.725469] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.725700] mmc0: CQHCI version 5.10 [ 6.726554] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.726736] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.726741] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.726748] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.726752] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.726756] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.728008] generic_infoframe_type: 0x87 [ 6.732221] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.738191] tegradc 15200000.display: DT parsed successfully [ 6.746362] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.752472] tegradc 15200000.display: Display dc.0000000055de3903 registered with id=0 [ 6.759451] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.772199] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.778490] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.782412] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.782416] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.790926] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.794915] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.794928] nvethernet 2490000.ethernet: Macsec not supported [ 6.796190] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.797380] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.797497] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.797622] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.804600] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.809831] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.810006] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.819747] tegra-se-nvhost 15810000.se: initialized [ 6.842688] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.848182] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.855179] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.856003] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.862186] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.913874] tegradc 15200000.display: probed [ 6.918516] tegra-se-nvhost 15820000.se: initialized [ 6.963462] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.967733] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.974038] tegra-se-nvhost 15830000.se: initialized [ 6.979880] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.984883] Console: switching to colour frame buffer device 240x67 [ 6.985126] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.990848] tegradc 15200000.display: fb registered [ 6.990912] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.993656] mmc0: Command Queue Engine enabled [ 6.993661] mmc0: periodic cache flush enabled [ 6.993674] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.994096] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.994204] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.997917] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.998168] tegra-se-nvhost 15840000.se: initialized [ 7.002925] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.003799] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.005322] tegra_actmon d230000.actmon: in actmon_register()... [ 7.005469] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.005845] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.006403] hvc_sysfs: hypervisor is not present [ 7.019804] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.033374] ALSA device list: [ 7.034860] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.042580] No soundcards found. [ 7.042617] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.047543] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.047548] usb 1-2: Manufacturer: Generic [ 7.071154] hub 1-2:1.0: USB hub found [ 7.126364] hub 1-2:1.0: 4 ports detected [ 7.135642] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.138993] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.141064] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.145554] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.146567] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.167852] Extcon AUX1(HDMI) enable [ 7.171474] tegradc 15210000.display: disp1 connected to head1->sor [ 7.178178] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.185431] tegradc 15210000.display: DT parsed successfully [ 7.190206] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.190659] tegradc 15210000.display: Display dc.00000000f31eed50 registered with id=1 [ 7.198666] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.207116] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.214223] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.214231] usb 2-3: Manufacturer: Generic [ 7.220271] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.235910] hub 2-3:1.0: USB hub found [ 7.241160] hub 2-3:1.0: 4 ports detected [ 7.242020] tegradc 15210000.display: probed [ 7.248033] tegradc 15210000.display: fb registered [ 7.256507] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.260062] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.268040] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.268133] Freeing unused kernel memory: 3968K [ 7.278130] tegradc 15210000.display: blank - powerdown [ 7.283181] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.288282] Run /init as init process [ 7.291080] Extcon DP: HPD disabled [ 7.298311] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.298321] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.310740] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.310844] tegradc 15200000.display: blank - powerdown [ 7.312166] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.352662] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.352667] Extcon AUX1(HDMI) disable [ 7.376009] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.376882] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.388328] tegradc 15200000.display: unblank [ 7.389382] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.389572] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.392197] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.392202] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.395483] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.397372] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.401356] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.401360] Extcon AUX1(HDMI) enable [ 7.414177] tegradc 15200000.display: sync windows ret = 247 [ 7.451878] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.454491] Extcon HDMI: HPD enabled [ 7.457043] tegradc 15200000.display: hdmi: plugged [ 7.461556] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.464320] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.466908] usb 1-3: Product: Bluetooth Radio [ 7.469391] usb 1-3: Manufacturer: Realtek [ 7.471902] usb 1-3: SerialNumber: 00e04c000001 [ 7.503926] Root device found: mmcblk0p1 [ 7.507324] Found dev node: /dev/mmcblk0p1 [ 7.543653] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.549110] Rootfs mounted over mmcblk0p1 [ 7.579312] Switching from initrd to actual rootfs [ 7.735163] systemd[1]: System time before build time, advancing clock. [ 7.805952] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.810841] systemd[1]: Detected architecture arm64. [ 7.844332] systemd[1]: Set hostname to . [ 8.012778] systemd-sysv-generator[245]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.355110] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.356863] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.362365] systemd[1]: Created slice system-modprobe.slice. [ 8.366941] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.371004] systemd[1]: Created slice User and Session Slice. [ 8.374491] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.378537] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.381861] systemd[1]: Reached target User and Group Name Lookups. [ 8.385009] systemd[1]: Reached target Slices. [ 8.388082] systemd[1]: Reached target Swap. [ 8.392060] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.395641] systemd[1]: Listening on Syslog Socket. [ 8.399153] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.402435] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.406604] systemd[1]: Listening on Journal Audit Socket. [ 8.410104] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.413769] systemd[1]: Listening on Journal Socket. [ 8.417359] systemd[1]: Listening on udev Control Socket. [ 8.420760] systemd[1]: Listening on udev Kernel Socket. [ 8.429057] systemd[1]: Mounting Huge Pages File System... [ 8.437860] systemd[1]: Mounting POSIX Message Queue File System... [ 8.446109] systemd[1]: Mounting RPC Pipe File System... [ 8.454691] systemd[1]: Mounting Kernel Debug File System... [ 8.462923] systemd[1]: Mounting Kernel Trace File System... [ 8.475727] systemd[1]: Starting Journal Service... [ 8.484578] systemd[1]: Starting Set the console keyboard layout... [ 8.492488] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.495954] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.502174] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.509901] systemd[1]: Started Nameserver information manager. [ 8.514451] systemd[1]: Reached target Network (Pre). [ 8.521795] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.523590] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.532049] systemd[1]: Starting Load Kernel Modules... [ 8.539672] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.547863] systemd[1]: Starting udev Coldplug all Devices... [ 8.558779] systemd[1]: Mounted Huge Pages File System. [ 8.562532] systemd[1]: Mounted POSIX Message Queue File System. [ 8.566111] systemd[1]: Mounted RPC Pipe File System. [ 8.569607] systemd[1]: Mounted Kernel Debug File System. [ 8.572044] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.573971] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.574395] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.574401] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.574411] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.574415] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.574908] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.575142] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.585227] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.586735] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.588281] systemd[1]: Mounted Kernel Trace File System. [ 8.602350] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.610148] systemd[1]: nvfb-udev.service: Succeeded. [ 8.614276] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.625936] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.638390] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.640164] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.647463] systemd[1]: Starting Load/Save Random Seed... [ 8.655708] systemd[1]: Starting Create System Users... [ 8.687161] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.687161] [ 8.711996] systemd[1]: Finished Load/Save Random Seed. [ 8.718831] systemd[1]: Finished Load Kernel Modules. [ 8.725051] systemd[1]: Finished Create System Users. [ 8.729331] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.735977] systemd[1]: Mounting Kernel Configuration File System... [ 8.744599] systemd[1]: Started OP-TEE Client Supplicant. [ 8.753556] systemd[1]: Starting Apply Kernel Variables... [ 8.761394] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.772619] systemd[1]: Finished Set the console keyboard layout. [ 8.779270] systemd[1]: Mounted Kernel Configuration File System. [ 10.288850] hot-surface-alert cooling state: 0 -> 1 [ 10.297268] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.304500] imx219 9-0010: board setup failed [ 10.306194] imx219: probe of 9-0010 failed with error -121 [ 10.321041] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.327997] imx219 10-0010: board setup failed [ 10.329819] imx219: probe of 10-0010 failed with error -121 [ 11.016049] using random self ethernet address [ 11.016054] using random host ethernet address [ 11.611520] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.613231] Creating 1 MTD partitions on "spi6.0": [ 11.614827] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.448207] using random self ethernet address [ 12.448214] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.786716] nvidia: loading out-of-tree module taints kernel. [ 59.445764] watchdog: watchdog0: watchdog did not stop! [ 59.928986] Trying to unregister non-registered hwtime source [ 62.986858] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.988558] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aÿâclk_dt_late initialized ÿäuÿânoc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 202ÿâavfs_clk_platform_post initialized ÿä2 aÿâcvc_late initialized regulator_post initialized ÿäarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.421] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> hdmi cable connected [0003.612] W> set volts not configured for 'vdd-1v0' [0003.619] W> set volts not configured for 'vdd-1v8-hs' [0003.619] I> retrieved tmds range from prod_list_hdmi_soc [0003.626] E> invalid display type [0003.628] E> cannot find any other nvdisp nodes [0003.644] I> edid read success [0003.657] I> edid read success [0003.657] I> width = 640, height = 480, frequency = 25174825 [0003.658] I> width = 1920, height = 1080, frequency = 148500000 [0003.658] I> width = 1280, height = 768, frequency = 79500000 [0003.658] I> width = 1360, height = 768, frequency = 85500000 [0003.659] I> width = 720, height = 480, frequency = 26973026 [0003.663] I> width = 720, height = 576, frequency = 26973026 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1280, height = 720, frequency = 74175824 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 1920, height = 1080, frequency = 148351648 [0003.691] I> width = 720, height = 480, frequency = 26973026 [0003.696] I> width = 720, height = 576, frequency = 26973026 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 3840, height = 2160, frequency = 296703296 [0003.725] I> width = 4096, height = 2160, frequency = 296703296 [0003.731] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.742] I> hdmi_enable, starting HDMI initialisation [0003.747] I> hdmi_enable, HDMI initialisation complete [0003.756] initializing target [0003.757] calling apps_init() [0003.757] starting app kernel_boot_app [0003.758] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000702] Console: colour dummy device 80x25 [ 0.002116] printk: console [tty0] enabled [ 0.002176] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002210] pid_max: default: 32768 minimum: 301 [ 0.002376] LSM: Security Framework initializing [ 0.002432] Yama: becoming mindful. [ 0.002472] SELinux: Initializing. [ 0.002617] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002654] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005479] rcu: Hierarchical SRCU implementation. [ 0.005769] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006450] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006500] DTB Build time: Aug 10 2022 20:31:49 [ 0.009249] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009497] Remapping and enabling EFI services. [ 0.011644] smp: Bringing up secondary CPUs ... [ 0.042944] Detected PIPT I-cache on CPU1 [ 0.043024] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072517] Detected PIPT I-cache on CPU2 [ 0.072666] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102294] Detected PIPT I-cache on CPU3 [ 0.102431] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132186] Detected PIPT I-cache on CPU4 [ 0.132336] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162025] Detected PIPT I-cache on CPU5 [ 0.162189] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162647] smp: Brought up 1 node, 6 CPUs [ 0.162803] SMP: Total of 6 processors activated. [ 0.162879] CPU features: detected: Privileged Access Never [ 0.162905] CPU features: detected: LSE atomic instructions [ 0.162919] CPU features: detected: User Access Override [ 0.162932] CPU features: detected: 32-bit EL0 Support [ 0.162945] CPU features: detected: RAS Extension Support [ 0.162957] CPU features: detected: CRC32 instructions [ 0.162971] CPU features: detected: 32-bit EL1 Support [ 0.232298] CPU: All CPU(s) started at EL2 [ 0.239051] devtmpfs: initialized [ 0.285633] Registered cp15_barrier emulation handler [ 0.285753] Registered setend emulation handler [ 0.285775] KASLR enabled [ 0.286011] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286053] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287292] pinctrl core: initialized pinctrl subsystem [ 0.288320] SMBIOS 3.0.0 present. [ 0.288353] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288924] NET: Registered protocol family 16 [ 0.290762] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291258] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291989] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292048] audit: initializing netlink subsys (disabled) [ 0.292375] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292768] thermal_sys: Registered thermal governor 'step_wise' [ 0.292774] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292792] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294921] cpuidle: using governor menu [ 0.295240] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295614] ASID allocator initialised with 32768 entries [ 0.295857] Serial: AMBA PL011 UART driver [ 0.299037] Tegra reboot handler registered. [ 0.371269] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.371409] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.371594] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.371637] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.371762] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.371806] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.371962] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.372020] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372176] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372217] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.374257] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.374290] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.374337] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.374364] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.374392] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.374417] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.374451] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.374481] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.374504] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.374526] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.374549] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.374571] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.374593] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.374615] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.374638] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.374660] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.374697] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.374800] mc-err: mcerr ops are set to t19x [ 0.386771] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.386792] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.386803] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.386814] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.394471] ACPI: Interpreter disabled. [ 0.396214] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.398177] iommu: Default domain type: Translated [ 0.398300] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.398855] SCSI subsystem initialized [ 0.399126] usbcore: registered new interface driver usbfs [ 0.399217] usbcore: registered new interface driver hub [ 0.399267] usbcore: registered new device driver usb [ 0.399845] mc: Linux media interface: v0.10 [ 0.399895] videodev: Linux video capture interface: v2.00 [ 0.400329] pps_core: LinuxPPS API ver. 1 registered [ 0.400351] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.400381] PTP clock support registered [ 0.400680] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.401166] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401262] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.402076] Registered efivars operations [ 0.410202] FPGA manager framework [ 0.410357] Advanced Linux Sound Architecture Driver Initialized. [ 0.411195] Bluetooth: Core ver 2.22 [ 0.411256] NET: Registered protocol family 31 [ 0.411273] Bluetooth: HCI device and connection manager initialized [ 0.411294] Bluetooth: HCI socket layer initialized [ 0.411311] Bluetooth: L2CAP socket layer initialized [ 0.411340] Bluetooth: SCO socket layer initialized [ 0.413474] camchar: rtcpu character device driver loaded [ 0.414472] clocksource: Switched to clocksource arch_sys_counter [ 0.832467] VFS: Disk quotas dquot_6.6.0 [ 0.832561] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.833095] pnp: PnP ACPI: disabled [ 0.847956] la/ptsa driver initialized. [ 0.848119] NET: Registered protocol family 2 [ 0.848367] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.856535] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.856745] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.857100] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.857717] TCP: Hash tables configured (established 65536 bind 65536) [ 0.857883] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.858038] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.858300] NET: Registered protocol family 1 [ 0.859241] RPC: Registered named UNIX socket transport module. [ 0.859268] RPC: Registered udp transport module. [ 0.859282] RPC: Registered tcp transport module. [ 0.859296] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.859345] PCI: CLS 0 bytes, default 64 [ 0.859703] Trying to unpack rootfs image as initramfs... [ 1.120668] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.123654] Freeing initrd memory: 8196K [ 1.128047] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.128074] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.128117] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.128445] kvm [1]: IPA Size Limit: 40 bits [ 1.129025] kvm [1]: vgic interrupt IRQ9 [ 1.129522] kvm [1]: VHE mode initialized successfully [ 1.130920] Initialise system trusted keyrings [ 1.131252] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.136035] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.136796] NFS: Registering the id_resolver key type [ 1.136823] Key type id_resolver registered [ 1.136833] Key type id_legacy registered [ 1.136899] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.136916] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.136964] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.144396] NET: Registered protocol family 38 [ 1.144415] Key type asymmetric registered [ 1.144426] Asymmetric key parser 'x509' registered [ 1.144467] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.144660] io scheduler mq-deadline registered [ 1.144674] io scheduler kyber registered [ 1.149290] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.151381] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.151438] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.151514] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.151584] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.151637] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.155446] scrncapt: init (heads:4 wins:6 planes:4) [ 1.155537] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.156434] EINJ: ACPI disabled. [ 1.158646] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.158665] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.158675] tegra-pmc: ### PMC reset level: L1 [ 1.158704] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.158743] tegra-pmc: PMC Prod config success [ 1.162557] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.646040] random: fast init done [ 2.713278] printk: console [ttyTCU0] enabled [ 2.718562] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.723685] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.728528] arm-smmu 10000000.iommu: stage 1 translation [ 2.733817] arm-smmu 10000000.iommu: stage 2 translation [ 2.739243] arm-smmu 10000000.iommu: nested translation [ 2.744863] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.751757] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.760992] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.765146] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.771698] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.778865] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.784753] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.789457] arm-smmu 12000000.iommu: stage 1 translation [ 2.794726] arm-smmu 12000000.iommu: stage 2 translation [ 2.800410] arm-smmu 12000000.iommu: nested translation [ 2.805832] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.812759] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.821671] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.826155] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.832682] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.840017] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.849697] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.853130] tegra_profiler: auth: init [ 2.857035] THERMAL EST: found 3 subdevs [ 2.860544] THERMAL EST num_resources: 0 [ 2.864629] [THERMAL EST subdev 0] [ 2.867964] [THERMAL EST subdev 1] [ 2.871359] [THERMAL EST subdev 2] [ 2.874338] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.880754] THERMAL EST: thz register success. [ 2.885297] THERMAL EST: end of probe, return err: 0 [ 2.890707] nvsciipc: loaded module [ 2.896855] tun: Universal TUN/TAP device driver, 1.6 [ 2.899935] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.906372] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.911656] e1000e: Intel(R) PRO/1000 Network Driver [ 2.916597] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.922931] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.927976] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.934135] PPP generic driver version 2.4.2 [ 2.938642] PPP BSD Compression module registered [ 2.943202] PPP Deflate Compression module registered [ 2.948468] PPP MPPE Compression module registered [ 2.953211] usbcore: registered new interface driver r8152 [ 2.958969] usbcore: registered new interface driver asix [ 2.964056] usbcore: registered new interface driver ax88179_178a [ 2.970173] usbcore: registered new interface driver cdc_ether [ 2.976374] usbcore: registered new interface driver net1080 [ 2.982019] usbcore: registered new interface driver cdc_subset [ 2.988069] usbcore: registered new interface driver zaurus [ 2.993459] usbcore: registered new interface driver cdc_ncm [ 2.999139] usbcore: registered new interface driver aqc111 [ 3.005034] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.011135] ohci-pci: OHCI PCI platform driver [ 3.015149] ohci-platform: OHCI generic platform driver [ 3.021059] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.027130] usbcore: registered new interface driver uas [ 3.031698] usbcore: registered new interface driver usb-storage [ 3.037751] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.043659] mousedev: PS/2 mouse device common for all mice [ 3.048857] usbcore: registered new interface driver xpad [ 3.056673] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.059351] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.067391] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.073889] i2c /dev entries driver [ 3.076970] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.082684] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.088336] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.093736] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.099058] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.104607] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.109989] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.121498] device-mapper: uevent: version 1.0.3 [ 3.121891] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.129946] cpuidle: Initializing cpuidle driver [ 3.134163] sdhci: Secure Digital Host Controller Interface driver [ 3.139210] sdhci: Copyright(c) Pierre Ossman [ 3.143308] Synopsys Designware Multimedia Card Interface Driver [ 3.149205] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.155074] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.155705] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.168297] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.186965] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.196143] vdd-1v0: supplied by regulator-dummy [ 3.201576] vdd-1v8-hs: supplied by regulator-dummy [ 3.206237] vdd-1v8-ls: supplied by regulator-dummy [ 3.210912] vdd-1v8-ao: supplied by regulator-dummy [ 3.214642] vddio-ddr-1v1: supplied by regulator-dummy [ 3.218886] vdd-rtc: supplied by regulator-dummy [ 3.220446] spmic-ldo1: supplied by regulator-dummy [ 3.221522] vdd-ao-3v3: supplied by regulator-dummy [ 3.227559] vddio-emmc-3v3: supplied by regulator-dummy [ 3.233625] spmic-ldo4: supplied by regulator-dummy [ 3.234748] vdd-usb-3v3: supplied by regulator-dummy [ 3.240803] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.246843] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.252227] spmic-ldo8: supplied by vdd-1v8-ls [ 3.253549] gpio-510 (gpio_default): hogged as output/high [ 3.255473] gpio-511 (gpio_default): hogged as output/high [ 3.262298] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.400702] max77686-rtc max77620-rtc: registered as rtc0 [ 3.401698] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.402035] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.095270] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.096285] hid: raw HID events driver (C) Jiri Kosina [ 4.096991] usbcore: registered new interface driver usbhid [ 4.097140] usbhid: USB HID core driver [ 4.098928] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.100053] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.146085] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.221491] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 76.215 ms) ÿá[ 4.185352] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.185907] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.186861] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.187509] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.189092] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.189750] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.190301] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.191508] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.191728] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.193493] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.201137] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.207876] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.212401] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.219103] denver_knobs_init:MTS_VERSION:55637613 [ 4.232268] t19x_cache tegra-cache: probed [ 4.234819] optee: probing for conduit method. [ 4.235627] optee: revision 3.16 (65cc2218) [ 4.236658] optee: dynamic shared memory is enabled [ 4.240346] optee: initialized driver [ 4.246443] nvpmodel: initialized successfully [ 4.248040] tegra_hv: get_hvd: not initialized yet [ 4.252612] user_ivc_mempool: hypervisor not present [ 4.258391] usbcore: registered new interface driver snd-usb-audio [ 4.264905] u32 classifier [ 4.266353] input device check on [ 4.270169] Actions configured [ 4.273515] Initializing XFRM netlink socket [ 4.278391] NET: Registered protocol family 10 [ 4.285443] Segment Routing with IPv6 [ 4.285757] NET: Registered protocol family 17 [ 4.290554] NET: Registered protocol family 15 [ 4.294703] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.308103] Bluetooth: RFCOMM socket layer initialized [ 4.312942] Bluetooth: RFCOMM ver 1.11 [ 4.316593] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.322659] Bluetooth: HIDP socket layer initialized [ 4.328312] 9pnet: Installing 9P2000 support [ 4.332187] Key type dns_resolver registered [ 4.337207] registered taskstats version 1 [ 4.340323] Loading compiled-in X.509 certificates [ 4.352693] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.356011] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.366427] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.368254] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.377021] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.385142] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.502661] tegra194-pcie 14160000.pcie: Link up [ 4.505767] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.505962] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.506145] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.506342] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.506597] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.506946] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.507389] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.520151] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.520689] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.521114] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.522791] pci 0004:01:00.0: supports D1 D2 [ 4.522946] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.534206] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.534583] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.534819] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.535212] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.535456] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.535609] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.537186] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.544896] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.553456] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.563477] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.568083] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.573828] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.580633] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.590106] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.591366] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.599536] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.608266] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.723096] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.723793] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.723959] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.724085] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.724431] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.724662] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.725102] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.725573] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.748364] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.748693] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.750537] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.752151] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.753458] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.755322] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.756250] pci 0005:00:00.0: Removing from iommu group 7 [ 5.756514] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.793026] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.818671] host1x 13e10000.host1x: initialized [ 5.820488] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.821419] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.822978] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.823679] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.824828] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.825504] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.826677] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.827293] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.828197] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.828839] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.833026] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.840201] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.849910] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.857257] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.867149] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.873978] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.883809] falcon 15340000.vic: Adding to iommu group 17 [ 5.899334] falcon 15340000.vic: initialized [ 5.900311] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.905828] falcon 15380000.nvjpg: initialized [ 5.906550] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.917019] falcon 154c0000.nvenc: initialized [ 5.917594] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.927558] falcon 15a80000.nvenc1: initialized [ 5.928055] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.939642] nvdec 15480000.nvdec: initialized [ 5.940098] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.950541] nvdec 15140000.nvdec1: initialized [ 5.950988] tsec 15500000.tsec: Adding to iommu group 18 [ 5.956486] tsec 15500000.tsec: initialized [ 5.956982] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.965025] tsec 15100000.tsecb: initialized [ 5.969064] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.996243] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.008491] gpio-374 (wifi-enable): hogged as output/high [ 6.008826] gpio-431 (camera-control-output-low): hogged as output/low [ 6.009084] gpio-432 (camera-control-output-low): hogged as output/low [ 6.010860] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.013148] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.013742] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.015131] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.020433] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.026729] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.031884] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.040025] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.047535] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.059665] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.064478] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.070318] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.078952] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.088358] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.095668] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.103269] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.109276] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.119305] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.125167] pva 16000000.pva0: Adding to iommu group 22 [ 6.153549] pva 16000000.pva0: initialized [ 6.158050] pva 16800000.pva1: Adding to iommu group 23 [ 6.169411] pva 16800000.pva1: initialized [ 6.173718] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.186532] nvdla 15880000.nvdla0: initialized [ 6.187746] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.196904] nvdla 158c0000.nvdla1: initialized [ 6.200750] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.201058] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.201441] tegradccommon 15200000.display-hub: dma mapping done [ 6.201594] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.201684] tegradc 15200000.display: Adding to iommu group 26 [ 6.201984] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.204024] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.209300] tegradc 15210000.display: Adding to iommu group 26 [ 6.209633] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.209651] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.215189] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.221425] generic_infoframe_type: 0x87 [ 6.226899] tegra_cec 3960000.tegra_cec: probed [ 6.227891] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.233132] tegradc 15200000.display: DT parsed successfully [ 6.239169] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.241359] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.247501] kfuse 3830000.kfuse: initialized [ 6.256723] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.260523] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.267675] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.267702] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.271925] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.281536] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.287649] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.295121] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.296565] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.303928] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.312945] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.317649] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.322322] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.328565] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.340025] tegradc 15210000.display: disp0 connected to head1->sor [ 6.348829] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.354237] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.376285] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.382364] tegradc 15210000.display: DT parsed successfully [ 6.410268] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.424859] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.427329] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.433090] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.441117] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.449939] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.456541] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.464223] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.471419] usb usb1: Product: xHCI Host Controller [ 6.476251] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.482566] usb usb1: SerialNumber: 3610000.xhci [ 6.488492] hub 1-0:1.0: USB hub found [ 6.491236] hub 1-0:1.0: 4 ports detected [ 6.495885] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.500610] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.507998] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.515782] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.523546] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.530781] usb usb2: Product: xHCI Host Controller [ 6.536013] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.541968] usb usb2: SerialNumber: 3610000.xhci [ 6.547567] hub 2-0:1.0: USB hub found [ 6.550760] hub 2-0:1.0: 4 ports detected [ 6.594749] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.601559] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.603500] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.603692] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.616859] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.617997] tegra194-cpufreq ccplex: probed with BWMGR [ 6.619245] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.619759] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.620189] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.621517] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.628570] tegra194-vi5 15c10000.vi: initialized [ 6.630247] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.630621] mmc0: CQHCI version 5.10 [ 6.630638] generic_infoframe_type: 0x87 [ 6.636399] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.638401] tegradc 15200000.display: DT parsed successfully [ 6.644617] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.650489] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.658126] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.672652] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.673894] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.679509] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.686508] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.687896] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.687904] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.694200] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.702539] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.710608] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.718347] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.718354] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.724481] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.732530] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.737633] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.752286] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.754502] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.764577] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.766816] tegradc 15200000.display: probed [ 6.772044] mmc0: Command Queue Engine enabled [ 6.772049] mmc0: periodic cache flush enabled [ 6.772060] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.772511] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.775579] nvethernet 2490000.ethernet: Macsec not supported [ 6.775769] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.817283] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.833149] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.835961] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.856542] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.856713] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.856738] Console: switching to colour frame buffer device 240x67 [ 6.858036] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.863882] tegradc 15200000.display: fb registered [ 6.872199] tegra-se-nvhost 15810000.se: initialized [ 6.876877] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.888186] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.893723] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.899038] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.905069] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.911490] tegra-se-nvhost 15820000.se: initialized [ 6.922262] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.925089] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.928000] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.928005] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.928009] usb 1-2: Manufacturer: Generic [ 6.930149] hub 1-2:1.0: USB hub found [ 6.936870] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.943818] hub 1-2:1.0: 4 ports detected [ 6.962366] tegra-se-nvhost 15830000.se: initialized [ 6.979173] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.981123] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.984397] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.994038] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.999605] tegra-se-nvhost 15840000.se: initialized [ 7.006625] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.013096] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.020065] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.027109] tegra_actmon d230000.actmon: in actmon_register()... [ 7.032644] Extcon AUX1(HDMI) enable [ 7.032817] tegradc 15210000.display: disp1 connected to head1->sor [ 7.038432] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.042123] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.043355] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.050750] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.053725] tegradc 15210000.display: DT parsed successfully [ 7.061326] hvc_sysfs: hypervisor is not present [ 7.068141] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.080180] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.102249] ALSA device list: [ 7.102386] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.102393] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.102826] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.102830] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.102834] usb 2-3: Manufacturer: Generic [ 7.134856] No soundcards found. [ 7.136855] tegradc 15210000.display: probed [ 7.142338] hub 2-3:1.0: USB hub found [ 7.146802] tegradc 15210000.display: fb registered [ 7.148921] hub 2-3:1.0: 4 ports detected [ 7.155120] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.162699] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.162709] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.176030] tegradc 15210000.display: blank - powerdown [ 7.176963] Freeing unused kernel memory: 3968K [ 7.181076] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.185677] Run /init as init process [ 7.193657] Extcon DP: HPD disabled [ 7.198511] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.201086] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.214387] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.214398] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.227416] tegradc 15200000.display: blank - powerdown [ 7.234514] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.264916] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.264921] Extcon AUX1(HDMI) disable [ 7.288328] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.289204] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.299110] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.299117] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.302207] tegradc 15200000.display: unblank [ 7.303347] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.303541] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.309298] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.311162] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.315129] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.315133] Extcon AUX1(HDMI) enable [ 7.327913] tegradc 15200000.display: sync windows ret = 247 [ 7.351628] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.359086] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.359091] usb 1-3: Product: Bluetooth Radio [ 7.359095] usb 1-3: Manufacturer: Realtek [ 7.359098] usb 1-3: SerialNumber: 00e04c000001 [ 7.365042] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.370089] Extcon HDMI: HPD enabled [ 7.374005] tegradc 15200000.display: hdmi: plugged [ 7.415398] Root device found: mmcblk0p1 [ 7.418904] Found dev node: /dev/mmcblk0p1 [ 7.454948] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.460260] Rootfs mounted over mmcblk0p1 [ 7.489943] Switching from initrd to actual rootfs [ 7.632809] systemd[1]: System time before build time, advancing clock. [ 7.703584] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.708559] systemd[1]: Detected architecture arm64. [ 7.767511] systemd[1]: Set hostname to . [ 7.940628] systemd-sysv-generator[254]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.286061] random: systemd: uninitialized urandom read (16 bytes read) [ 8.287913] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.289584] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.295170] systemd[1]: Created slice system-modprobe.slice. [ 8.298793] random: systemd: uninitialized urandom read (16 bytes read) [ 8.301455] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.304745] random: systemd: uninitialized urandom read (16 bytes read) [ 8.307416] systemd[1]: Created slice User and Session Slice. [ 8.310985] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.315243] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.318808] systemd[1]: Reached target User and Group Name Lookups. [ 8.322148] systemd[1]: Reached target Slices. [ 8.325513] systemd[1]: Reached target Swap. [ 8.329558] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.333283] systemd[1]: Listening on Syslog Socket. [ 8.337024] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.340482] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.344767] systemd[1]: Listening on Journal Audit Socket. [ 8.348440] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.352311] systemd[1]: Listening on Journal Socket. [ 8.356117] systemd[1]: Listening on udev Control Socket. [ 8.361251] systemd[1]: Listening on udev Kernel Socket. [ 8.371196] systemd[1]: Mounting Huge Pages File System... [ 8.379882] systemd[1]: Mounting POSIX Message Queue File System... [ 8.388052] systemd[1]: Mounting RPC Pipe File System... [ 8.396486] systemd[1]: Mounting Kernel Debug File System... [ 8.405057] systemd[1]: Mounting Kernel Trace File System... [ 8.414985] systemd[1]: Starting Journal Service... [ 8.424021] systemd[1]: Starting Set the console keyboard layout... [ 8.432268] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.435906] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.442599] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.450709] systemd[1]: Started Nameserver information manager. [ 8.455428] systemd[1]: Reached target Network (Pre). [ 8.462241] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.464186] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.471694] systemd[1]: Starting Load Kernel Modules... [ 8.479479] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.487199] systemd[1]: Starting udev Coldplug all Devices... [ 8.498054] systemd[1]: Mounted Huge Pages File System. [ 8.501857] systemd[1]: Mounted POSIX Message Queue File System. [ 8.505437] systemd[1]: Mounted RPC Pipe File System. [ 8.508989] systemd[1]: Mounted Kernel Debug File System. [ 8.509108] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.514736] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.516316] systemd[1]: Mounted Kernel Trace File System. [ 8.517006] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.519421] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.519441] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.519445] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.519614] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.522712] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.533110] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.533120] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.551822] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.561055] systemd[1]: nvfb-udev.service: Succeeded. [ 8.565038] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.576371] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.589130] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.591562] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.598402] systemd[1]: Starting Load/Save Random Seed... [ 8.607698] systemd[1]: Starting Create System Users... [ 8.628953] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.628953] [ 8.666568] systemd[1]: Finished Load Kernel Modules. [ 8.671417] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.677910] systemd[1]: Mounting Kernel Configuration File System... [ 8.685790] systemd[1]: Started OP-TEE Client Supplicant. [ 8.694263] systemd[1]: Starting Apply Kernel Variables... [ 8.704697] systemd[1]: Finished Set the console keyboard layout. [ 8.711452] systemd[1]: Mounted Kernel Configuration File System. [ 8.724012] systemd[1]: Finished Create System Users. [ 9.866512] random: crng init done [ 9.867844] random: 7 urandom warning(s) missed due to ratelimiting [ 10.100845] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.119456] imx219 9-0010: board setup failed [ 10.119550] imx219: probe of 9-0010 failed with error -121 [ 10.135526] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.141966] imx219 10-0010: board setup failed [ 10.143283] imx219: probe of 10-0010 failed with error -121 [ 10.258244] hot-surface-alert cooling state: 0 -> 1 [ 10.985199] using random self ethernet address [ 11.026533] using random host ethernet address [ 12.215000] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.216655] Creating 1 MTD partitions on "spi6.0": [ 12.218227] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.378902] using random self ethernet address [ 12.380616] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.861537] nvidia: loading out-of-tree module taints kernel. [ 59.416240] watchdog: watchdog0: watchdog did not stop! [ 59.884248] Trying to unregister non-registered hwtime source [ 62.943811] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.945536] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ãÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.419] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> regulator 'vdd-hdmi-5v0' already enabled [0003.606] I> hdmi cable connected [0003.612] W> set volts not configured for 'vdd-1v0' [0003.617] W> set volts not configured for 'vdd-1v8-hs' [0003.618] I> retrieved tmds range from prod_list_hdmi_soc [0003.624] E> invalid display type [0003.626] E> cannot find any other nvdisp nodes [0003.642] I> edid read success [0003.655] I> edid read success [0003.655] I> width = 640, height = 480, frequency = 25174825 [0003.655] I> width = 1920, height = 1080, frequency = 148500000 [0003.656] I> width = 1280, height = 768, frequency = 79500000 [0003.656] I> width = 1360, height = 768, frequency = 85500000 [0003.657] I> width = 720, height = 480, frequency = 26973026 [0003.661] I> width = 720, height = 576, frequency = 26973026 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1280, height = 720, frequency = 74175824 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 1920, height = 1080, frequency = 148351648 [0003.689] I> width = 720, height = 480, frequency = 26973026 [0003.694] I> width = 720, height = 576, frequency = 26973026 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 3840, height = 2160, frequency = 296703296 [0003.723] I> width = 4096, height = 2160, frequency = 296703296 [0003.729] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.740] I> hdmi_enable, starting HDMI initialisation [0003.745] I> hdmi_enable, HDMI initialisation complete [0003.755] initializing target [0003.756] calling apps_init() [0003.756] starting app kernel_boot_app [0003.757] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000be000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000090974000-0x00000000a0974000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000680] Console: colour dummy device 80x25 [ 0.002119] printk: console [tty0] enabled [ 0.002178] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002220] pid_max: default: 32768 minimum: 301 [ 0.002390] LSM: Security Framework initializing [ 0.002449] Yama: becoming mindful. [ 0.002491] SELinux: Initializing. [ 0.002658] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002714] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005807] rcu: Hierarchical SRCU implementation. [ 0.006079] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006759] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006811] DTB Build time: Aug 10 2022 20:31:49 [ 0.009415] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009669] Remapping and enabling EFI services. [ 0.011734] smp: Bringing up secondary CPUs ... [ 0.045547] Detected PIPT I-cache on CPU1 [ 0.045622] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075174] Detected PIPT I-cache on CPU2 [ 0.075270] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104841] Detected PIPT I-cache on CPU3 [ 0.104933] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134625] Detected PIPT I-cache on CPU4 [ 0.134724] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164439] Detected PIPT I-cache on CPU5 [ 0.164528] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165014] smp: Brought up 1 node, 6 CPUs [ 0.165232] SMP: Total of 6 processors activated. [ 0.165318] CPU features: detected: Privileged Access Never [ 0.165344] CPU features: detected: LSE atomic instructions [ 0.165360] CPU features: detected: User Access Override [ 0.165373] CPU features: detected: 32-bit EL0 Support [ 0.165386] CPU features: detected: RAS Extension Support [ 0.165399] CPU features: detected: CRC32 instructions [ 0.165413] CPU features: detected: 32-bit EL1 Support [ 0.234637] CPU: All CPU(s) started at EL2 [ 0.241017] devtmpfs: initialized [ 0.288978] Registered cp15_barrier emulation handler [ 0.289108] Registered setend emulation handler [ 0.289127] KASLR enabled [ 0.289384] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289411] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290764] pinctrl core: initialized pinctrl subsystem [ 0.291759] SMBIOS 3.0.0 present. [ 0.291786] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292382] NET: Registered protocol family 16 [ 0.294342] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.294849] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295543] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295604] audit: initializing netlink subsys (disabled) [ 0.295901] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296294] thermal_sys: Registered thermal governor 'step_wise' [ 0.296301] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296315] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299459] cpuidle: using governor menu [ 0.299874] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300376] ASID allocator initialised with 32768 entries [ 0.300580] Serial: AMBA PL011 UART driver [ 0.303648] Tegra reboot handler registered. [ 0.372154] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.372281] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.372456] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.372498] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.372640] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.372696] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.372829] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.372869] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372986] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.373025] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.375527] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.375586] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.375617] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.375644] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.375674] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375701] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.375743] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375775] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375799] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375823] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.375847] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.375870] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.375894] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.375917] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.375941] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.375965] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.375988] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.376075] mc-err: mcerr ops are set to t19x [ 0.387627] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.387650] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.387662] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.387674] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.393814] ACPI: Interpreter disabled. [ 0.395089] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.396309] iommu: Default domain type: Translated [ 0.396375] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.396775] SCSI subsystem initialized [ 0.396913] usbcore: registered new interface driver usbfs [ 0.396954] usbcore: registered new interface driver hub [ 0.396986] usbcore: registered new device driver usb [ 0.397400] mc: Linux media interface: v0.10 [ 0.397425] videodev: Linux video capture interface: v2.00 [ 0.397705] pps_core: LinuxPPS API ver. 1 registered [ 0.397716] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.397738] PTP clock support registered [ 0.397948] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.398250] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.398326] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.398920] Registered efivars operations [ 0.404185] FPGA manager framework [ 0.404286] Advanced Linux Sound Architecture Driver Initialized. [ 0.404884] Bluetooth: Core ver 2.22 [ 0.404921] NET: Registered protocol family 31 [ 0.404951] Bluetooth: HCI device and connection manager initialized [ 0.404967] Bluetooth: HCI socket layer initialized [ 0.404983] Bluetooth: L2CAP socket layer initialized [ 0.405003] Bluetooth: SCO socket layer initialized [ 0.407536] camchar: rtcpu character device driver loaded [ 0.408476] clocksource: Switched to clocksource arch_sys_counter [ 0.810678] VFS: Disk quotas dquot_6.6.0 [ 0.810795] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.811288] pnp: PnP ACPI: disabled [ 0.824755] la/ptsa driver initialized. [ 0.824931] NET: Registered protocol family 2 [ 0.825128] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.835503] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.835653] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.836027] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.836656] TCP: Hash tables configured (established 65536 bind 65536) [ 0.836816] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.836982] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.837255] NET: Registered protocol family 1 [ 0.838098] RPC: Registered named UNIX socket transport module. [ 0.838144] RPC: Registered udp transport module. [ 0.838166] RPC: Registered tcp transport module. [ 0.838187] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.838234] PCI: CLS 0 bytes, default 64 [ 0.838512] Trying to unpack rootfs image as initramfs... [ 1.103474] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.106711] Freeing initrd memory: 8196K [ 1.111286] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.111326] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.111379] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.111737] kvm [1]: IPA Size Limit: 40 bits [ 1.112323] kvm [1]: vgic interrupt IRQ9 [ 1.112995] kvm [1]: VHE mode initialized successfully [ 1.114498] Initialise system trusted keyrings [ 1.114848] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.120149] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.120921] NFS: Registering the id_resolver key type [ 1.120963] Key type id_resolver registered [ 1.120980] Key type id_legacy registered [ 1.121061] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.121118] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.121160] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.130736] NET: Registered protocol family 38 [ 1.130763] Key type asymmetric registered [ 1.130781] Asymmetric key parser 'x509' registered [ 1.130867] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.131142] io scheduler mq-deadline registered [ 1.131165] io scheduler kyber registered [ 1.137096] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.140163] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.140272] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.140349] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.140423] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.140537] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.146192] scrncapt: init (heads:4 wins:6 planes:4) [ 1.146408] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.147358] EINJ: ACPI disabled. [ 1.150661] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.150687] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.150702] tegra-pmc: ### PMC reset level: L1 [ 1.150715] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.150785] tegra-pmc: PMC Prod config success [ 1.156003] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.160799] random: fast init done [ 1.160963] printk: console [ttyTCU0] enabled [ 2.713545] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.718082] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.722708] arm-smmu 10000000.iommu: stage 1 translation [ 2.727883] arm-smmu 10000000.iommu: stage 2 translation [ 2.733642] arm-smmu 10000000.iommu: nested translation [ 2.738725] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.745901] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.756205] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.759284] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.765598] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.773547] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.778628] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.783349] arm-smmu 12000000.iommu: stage 1 translation [ 2.789139] arm-smmu 12000000.iommu: stage 2 translation [ 2.794284] arm-smmu 12000000.iommu: nested translation [ 2.799711] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.806892] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.817024] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.819985] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.826831] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.833974] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.844257] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.847002] tegra_profiler: auth: init [ 2.851363] THERMAL EST: found 3 subdevs [ 2.854924] THERMAL EST num_resources: 0 [ 2.858510] [THERMAL EST subdev 0] [ 2.862089] [THERMAL EST subdev 1] [ 2.865273] [THERMAL EST subdev 2] [ 2.868748] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.874978] THERMAL EST: thz register success. [ 2.879193] THERMAL EST: end of probe, return err: 0 [ 2.884786] nvsciipc: loaded module [ 2.891828] tun: Universal TUN/TAP device driver, 1.6 [ 2.894234] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.900518] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.905841] e1000e: Intel(R) PRO/1000 Network Driver [ 2.911002] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.917075] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.922394] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.928536] PPP generic driver version 2.4.2 [ 2.932781] PPP BSD Compression module registered [ 2.937362] PPP Deflate Compression module registered [ 2.942604] PPP MPPE Compression module registered [ 2.947382] usbcore: registered new interface driver r8152 [ 2.953154] usbcore: registered new interface driver asix [ 2.958199] usbcore: registered new interface driver ax88179_178a [ 2.964326] usbcore: registered new interface driver cdc_ether [ 2.970528] usbcore: registered new interface driver net1080 [ 2.976127] usbcore: registered new interface driver cdc_subset [ 2.981920] usbcore: registered new interface driver zaurus [ 2.987607] usbcore: registered new interface driver cdc_ncm [ 2.993290] usbcore: registered new interface driver aqc111 [ 2.998913] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.005034] ohci-pci: OHCI PCI platform driver [ 3.009559] ohci-platform: OHCI generic platform driver [ 3.015553] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.021596] usbcore: registered new interface driver uas [ 3.025614] usbcore: registered new interface driver usb-storage [ 3.032024] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.037758] mousedev: PS/2 mouse device common for all mice [ 3.043045] usbcore: registered new interface driver xpad [ 3.050729] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.053503] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.061271] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.067826] i2c /dev entries driver [ 3.071433] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.077254] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.082373] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.087943] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.093283] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.098769] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.104167] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.117918] device-mapper: uevent: version 1.0.3 [ 3.118299] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.123955] cpuidle: Initializing cpuidle driver [ 3.128385] sdhci: Secure Digital Host Controller Interface driver [ 3.133100] sdhci: Copyright(c) Pierre Ossman [ 3.137447] Synopsys Designware Multimedia Card Interface Driver [ 3.143363] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.149523] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.150097] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.162674] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.180928] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.189913] vdd-1v0: supplied by regulator-dummy [ 3.195288] vdd-1v8-hs: supplied by regulator-dummy [ 3.199908] vdd-1v8-ls: supplied by regulator-dummy [ 3.204601] vdd-1v8-ao: supplied by regulator-dummy [ 3.208294] vddio-ddr-1v1: supplied by regulator-dummy [ 3.212670] vdd-rtc: supplied by regulator-dummy [ 3.214195] spmic-ldo1: supplied by regulator-dummy [ 3.215293] vdd-ao-3v3: supplied by regulator-dummy [ 3.221337] vddio-emmc-3v3: supplied by regulator-dummy [ 3.227402] spmic-ldo4: supplied by regulator-dummy [ 3.228530] vdd-usb-3v3: supplied by regulator-dummy [ 3.234573] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.240565] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.245896] spmic-ldo8: supplied by vdd-1v8-ls [ 3.247198] gpio-510 (gpio_default): hogged as output/high [ 3.249320] gpio-511 (gpio_default): hogged as output/high [ 3.256191] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.394858] max77686-rtc max77620-rtc: registered as rtc0 [ 3.396027] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.396302] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.081689] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.082642] hid: raw HID events driver (C) Jiri Kosina [ 4.083282] usbcore: registered new interface driver usbhid [ 4.083428] usbhid: USB HID core driver [ 4.085061] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.086159] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.228532] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.304310] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.587 ms) ÿá[ 4.171452] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.172042] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.173150] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.173977] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.175655] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.176340] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.177081] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.178235] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.178545] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.180315] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.187885] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.194223] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.199398] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.206324] denver_knobs_init:MTS_VERSION:55637613 [ 4.219267] t19x_cache tegra-cache: probed [ 4.222868] optee: probing for conduit method. [ 4.223762] optee: revision 3.16 (65cc2218) [ 4.224868] optee: dynamic shared memory is enabled [ 4.226470] optee: initialized driver [ 4.233587] nvpmodel: initialized successfully [ 4.234202] tegra_hv: get_hvd: not initialized yet [ 4.239166] user_ivc_mempool: hypervisor not present [ 4.245595] usbcore: registered new interface driver snd-usb-audio [ 4.251271] u32 classifier [ 4.252679] input device check on [ 4.256188] Actions configured [ 4.260148] Initializing XFRM netlink socket [ 4.265121] NET: Registered protocol family 10 [ 4.271708] Segment Routing with IPv6 [ 4.272374] NET: Registered protocol family 17 [ 4.276529] NET: Registered protocol family 15 [ 4.280810] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.294210] Bluetooth: RFCOMM socket layer initialized [ 4.299087] Bluetooth: RFCOMM ver 1.11 [ 4.303203] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.308807] Bluetooth: HIDP socket layer initialized [ 4.314794] 9pnet: Installing 9P2000 support [ 4.318517] Key type dns_resolver registered [ 4.323780] registered taskstats version 1 [ 4.326946] Loading compiled-in X.509 certificates [ 4.338566] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.342283] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.352549] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.354867] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.363163] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.371805] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.488569] tegra194-pcie 14160000.pcie: Link up [ 4.491472] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.491699] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.491865] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.492111] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.492353] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.492811] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.493304] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.505264] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.505699] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.506156] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.507757] pci 0004:01:00.0: supports D1 D2 [ 4.507982] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.518752] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.519165] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.519400] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.519870] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.520158] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.520379] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.523287] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.530532] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.539410] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.549378] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.554031] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.559664] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.566576] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.574933] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.577327] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.585480] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.594198] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.709301] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.709726] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.709954] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.710089] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.710370] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.710561] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.711054] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.711466] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.731367] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.731697] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.733580] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.734746] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.736231] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.737977] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.739063] pci 0005:00:00.0: Removing from iommu group 7 [ 5.739416] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.774017] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.798158] host1x 13e10000.host1x: initialized [ 5.799661] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.800697] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.802019] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.802653] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.803857] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.804702] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.806039] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.806780] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.807920] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.809293] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.819593] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.826112] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.836425] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.843136] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.853309] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.860396] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.870286] falcon 15340000.vic: Adding to iommu group 17 [ 5.884959] falcon 15340000.vic: initialized [ 5.885904] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.891470] falcon 15380000.nvjpg: initialized [ 5.892038] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.902760] falcon 154c0000.nvenc: initialized [ 5.903285] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.913542] falcon 15a80000.nvenc1: initialized [ 5.914024] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.926382] nvdec 15480000.nvdec: initialized [ 5.926839] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.936035] nvdec 15140000.nvdec1: initialized [ 5.936722] tsec 15500000.tsec: Adding to iommu group 18 [ 5.942410] tsec 15500000.tsec: initialized [ 5.942888] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.950688] tsec 15100000.tsecb: initialized [ 5.954306] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.981988] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.994505] gpio-374 (wifi-enable): hogged as output/high [ 5.994777] gpio-431 (camera-control-output-low): hogged as output/low [ 5.995108] gpio-432 (camera-control-output-low): hogged as output/low [ 5.997028] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.999192] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.999749] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.001524] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.007005] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.013080] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.018221] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.026642] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.033776] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.045501] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.050685] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.056591] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.065405] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.074753] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.081652] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.089446] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.095441] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.105554] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.111370] pva 16000000.pva0: Adding to iommu group 22 [ 6.139225] pva 16000000.pva0: initialized [ 6.143803] pva 16800000.pva1: Adding to iommu group 23 [ 6.156094] pva 16800000.pva1: initialized [ 6.160754] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.174667] nvdla 15880000.nvdla0: initialized [ 6.176005] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.185796] nvdla 158c0000.nvdla1: initialized [ 6.190026] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.190337] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.190366] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.190594] tegradc 15200000.display: Adding to iommu group 26 [ 6.190733] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.191589] tegradccommon 15200000.display-hub: dma mapping done [ 6.193263] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.195791] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.198867] tegradc 15210000.display: Adding to iommu group 26 [ 6.198986] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.199135] generic_infoframe_type: 0x87 [ 6.199235] tegradc 15200000.display: DT parsed successfully [ 6.199318] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.201316] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.204947] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.204961] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.204965] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.205797] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.205808] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.206983] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.213419] tegra_cec 3960000.tegra_cec: probed [ 6.214627] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.220070] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.225360] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.231877] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.237352] kfuse 3830000.kfuse: initialized [ 6.246892] tegradc 15210000.display: disp0 connected to head1->sor [ 6.254042] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.261429] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.267437] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.268102] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.273882] tegradc 15210000.display: DT parsed successfully [ 6.285432] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.288900] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.376592] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.381480] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.390455] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.395922] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.416641] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.417025] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.418996] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.427819] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.436230] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.442927] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.450429] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.457616] usb usb1: Product: xHCI Host Controller [ 6.462288] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.468633] usb usb1: SerialNumber: 3610000.xhci [ 6.474393] hub 1-0:1.0: USB hub found [ 6.477203] hub 1-0:1.0: 4 ports detected [ 6.481795] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.486810] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.494151] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.494248] random: crng init done [ 6.502023] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.513437] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.520649] usb usb2: Product: xHCI Host Controller [ 6.525288] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.531501] usb usb2: SerialNumber: 3610000.xhci [ 6.537007] hub 2-0:1.0: USB hub found [ 6.539966] hub 2-0:1.0: 4 ports detected [ 6.585313] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.591579] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.593377] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.593603] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.607122] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.608148] tegra194-cpufreq ccplex: probed with BWMGR [ 6.609456] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.609899] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.610343] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.611772] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.619643] tegra194-vi5 15c10000.vi: initialized [ 6.620877] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.621132] generic_infoframe_type: 0x87 [ 6.622063] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.624191] tegradc 15200000.display: DT parsed successfully [ 6.630894] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.636494] tegradc 15200000.display: Display dc.00000000b9623d1c registered with id=0 [ 6.637043] mmc0: CQHCI version 5.10 [ 6.644389] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.653142] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.655932] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.662241] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.668526] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.670698] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.677614] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.685941] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.696517] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.700111] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.708074] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.714193] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.714373] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.720594] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.727774] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.735006] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.739838] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.740379] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.742811] tegradc 15200000.display: probed [ 6.755308] mmc0: Command Queue Engine enabled [ 6.755313] mmc0: periodic cache flush enabled [ 6.755333] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.755987] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.756173] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.760352] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.765464] nvethernet 2490000.ethernet: Macsec not supported [ 6.766916] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.840755] Console: switching to colour frame buffer device 240x67 [ 6.841610] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.846778] tegradc 15200000.display: fb registered [ 6.852376] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.864495] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.864580] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.871352] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.877904] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.883096] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.900379] tegra-se-nvhost 15810000.se: initialized [ 6.901999] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.906777] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.913081] tegra-se-nvhost 15820000.se: initialized [ 6.919126] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.924296] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.930584] tegra-se-nvhost 15830000.se: initialized [ 6.932404] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.935859] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.943354] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.943360] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.943364] usb 1-2: Manufacturer: Generic [ 6.945496] hub 1-2:1.0: USB hub found [ 6.950173] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.958028] hub 1-2:1.0: 4 ports detected [ 6.962259] tegra-se-nvhost 15840000.se: initialized [ 6.966141] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.971194] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.976771] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.981068] tegra_actmon d230000.actmon: in actmon_register()... [ 6.984598] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.999755] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.008245] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.021450] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.026538] Extcon AUX1(HDMI) enable [ 7.034254] hvc_sysfs: hypervisor is not present [ 7.041566] tegradc 15210000.display: disp1 connected to head1->sor [ 7.053366] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.056091] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.070752] tegradc 15210000.display: DT parsed successfully [ 7.072245] ALSA device list: [ 7.076391] tegradc 15210000.display: Display dc.0000000076b32564 registered with id=1 [ 7.079493] No soundcards found. [ 7.090845] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.097013] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.098114] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.110249] tegradc 15210000.display: probed [ 7.111698] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.123441] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.123445] usb 2-3: Manufacturer: Generic [ 7.132088] tegradc 15210000.display: fb registered [ 7.134501] hub 2-3:1.0: USB hub found [ 7.140724] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.143093] Freeing unused kernel memory: 3968K [ 7.143223] hub 2-3:1.0: 4 ports detected [ 7.148364] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.148381] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.169978] tegradc 15210000.display: blank - powerdown [ 7.175518] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.183277] Extcon DP: HPD disabled [ 7.183281] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.183289] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.183294] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.183363] tegradc 15200000.display: blank - powerdown [ 7.196606] Run /init as init process [ 7.216528] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.232525] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.233248] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.233271] Extcon AUX1(HDMI) disable [ 7.256394] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.257215] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.268778] tegradc 15200000.display: unblank [ 7.269809] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.269993] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.275726] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.277534] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.281693] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.281697] Extcon AUX1(HDMI) enable [ 7.294314] tegradc 15200000.display: sync windows ret = 247 [ 7.297352] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.329759] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.334649] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.341577] Extcon HDMI: HPD enabled [ 7.345294] tegradc 15200000.display: hdmi: plugged [ 7.369751] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.371303] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.372839] usb 1-3: Product: Bluetooth Radio [ 7.374208] usb 1-3: Manufacturer: Realtek [ 7.375564] usb 1-3: SerialNumber: 00e04c000001 [ 7.384614] Root device found: mmcblk0p1 [ 7.388002] Found dev node: /dev/mmcblk0p1 [ 7.424338] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.429868] Rootfs mounted over mmcblk0p1 [ 7.458126] Switching from initrd to actual rootfs [ 7.601408] systemd[1]: System time before build time, advancing clock. [ 7.672952] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.678046] systemd[1]: Detected architecture arm64. [ 7.722731] systemd[1]: Set hostname to . [ 7.881959] systemd-sysv-generator[242]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.236395] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.238200] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.243962] systemd[1]: Created slice system-modprobe.slice. [ 8.249017] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.253208] systemd[1]: Created slice User and Session Slice. [ 8.256753] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.260911] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.264320] systemd[1]: Reached target User and Group Name Lookups. [ 8.267659] systemd[1]: Reached target Slices. [ 8.270875] systemd[1]: Reached target Swap. [ 8.274902] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.278597] systemd[1]: Listening on Syslog Socket. [ 8.282246] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.285672] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.289915] systemd[1]: Listening on Journal Audit Socket. [ 8.293503] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.298789] systemd[1]: Listening on Journal Socket. [ 8.303563] systemd[1]: Listening on udev Control Socket. [ 8.307129] systemd[1]: Listening on udev Kernel Socket. [ 8.315694] systemd[1]: Mounting Huge Pages File System... [ 8.324305] systemd[1]: Mounting POSIX Message Queue File System... [ 8.332535] systemd[1]: Mounting RPC Pipe File System... [ 8.341254] systemd[1]: Mounting Kernel Debug File System... [ 8.349647] systemd[1]: Mounting Kernel Trace File System... [ 8.359695] systemd[1]: Starting Journal Service... [ 8.368911] systemd[1]: Starting Set the console keyboard layout... [ 8.377156] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.380696] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.387234] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.395463] systemd[1]: Started Nameserver information manager. [ 8.400333] systemd[1]: Reached target Network (Pre). [ 8.407366] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.407609] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.417427] systemd[1]: Starting Load Kernel Modules... [ 8.425345] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.433681] systemd[1]: Starting udev Coldplug all Devices... [ 8.445076] systemd[1]: Mounted Huge Pages File System. [ 8.448814] systemd[1]: Mounted POSIX Message Queue File System. [ 8.452441] systemd[1]: Mounted RPC Pipe File System. [ 8.454893] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.460210] systemd[1]: Mounted Kernel Debug File System. [ 8.460379] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.464263] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.464270] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.464278] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.464283] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.464549] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.464775] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.473999] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.474680] systemd[1]: Mounted Kernel Trace File System. [ 8.475564] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.483750] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.490448] systemd[1]: nvfb-udev.service: Succeeded. [ 8.495071] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.507579] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.513093] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.514820] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.529759] systemd[1]: Starting Load/Save Random Seed... [ 8.538432] systemd[1]: Starting Create System Users... [ 8.583944] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.583944] [ 8.586039] systemd[1]: Finished Load/Save Random Seed. [ 8.601174] systemd[1]: Finished Create System Users. [ 8.609973] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.617368] systemd[1]: Finished Load Kernel Modules. [ 8.621995] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.629036] systemd[1]: Mounting Kernel Configuration File System... [ 8.637321] systemd[1]: Started OP-TEE Client Supplicant. [ 8.647241] systemd[1]: Starting Apply Kernel Variables... [ 8.658129] systemd[1]: Finished Set the console keyboard layout. [ 8.662513] systemd[1]: Mounted Kernel Configuration File System. [ 10.082518] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.087718] imx219 9-0010: board setup failed [ 10.087811] imx219: probe of 9-0010 failed with error -121 [ 10.098780] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.103975] imx219 10-0010: board setup failed [ 10.104086] imx219: probe of 10-0010 failed with error -121 [ 10.178331] hot-surface-alert cooling state: 0 -> 1 [ 11.073042] using random self ethernet address [ 11.074201] using random host ethernet address [ 11.573382] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.573389] Creating 1 MTD partitions on "spi6.0": [ 11.573398] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.336333] using random self ethernet address [ 12.338624] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.789214] nvidia: loading out-of-tree module taints kernel. [ 59.702308] watchdog: watchdog0: watchdog did not stop! [ 60.190200] Trying to unregister non-registered hwtime source [ 63.247632] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.249376] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.607] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.622] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.650] I> edid read success [0003.651] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.652] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.736] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.750] initializing target [0003.751] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000768] Console: colour dummy device 80x25 [ 0.002134] printk: console [tty0] enabled [ 0.002196] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002231] pid_max: default: 32768 minimum: 301 [ 0.002401] LSM: Security Framework initializing [ 0.002459] Yama: becoming mindful. [ 0.002502] SELinux: Initializing. [ 0.002654] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002692] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005795] rcu: Hierarchical SRCU implementation. [ 0.006051] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006722] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006782] DTB Build time: Aug 10 2022 20:31:49 [ 0.009467] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009697] Remapping and enabling EFI services. [ 0.011682] smp: Bringing up secondary CPUs ... [ 0.041506] Detected PIPT I-cache on CPU1 [ 0.041584] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071167] Detected PIPT I-cache on CPU2 [ 0.071264] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100880] Detected PIPT I-cache on CPU3 [ 0.100971] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130750] Detected PIPT I-cache on CPU4 [ 0.130937] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160695] Detected PIPT I-cache on CPU5 [ 0.160843] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161241] smp: Brought up 1 node, 6 CPUs [ 0.161422] SMP: Total of 6 processors activated. [ 0.161478] CPU features: detected: Privileged Access Never [ 0.161516] CPU features: detected: LSE atomic instructions [ 0.161530] CPU features: detected: User Access Override [ 0.161543] CPU features: detected: 32-bit EL0 Support [ 0.161555] CPU features: detected: RAS Extension Support [ 0.161568] CPU features: detected: CRC32 instructions [ 0.161581] CPU features: detected: 32-bit EL1 Support [ 0.230843] CPU: All CPU(s) started at EL2 [ 0.237319] devtmpfs: initialized [ 0.285664] Registered cp15_barrier emulation handler [ 0.285799] Registered setend emulation handler [ 0.285819] KASLR enabled [ 0.286126] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286154] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287458] pinctrl core: initialized pinctrl subsystem [ 0.288410] SMBIOS 3.0.0 present. [ 0.288438] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289098] NET: Registered protocol family 16 [ 0.290994] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291512] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292198] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292256] audit: initializing netlink subsys (disabled) [ 0.292475] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292878] thermal_sys: Registered thermal governor 'step_wise' [ 0.292885] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292899] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295042] cpuidle: using governor menu [ 0.295346] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295740] ASID allocator initialised with 32768 entries [ 0.295960] Serial: AMBA PL011 UART driver [ 0.299298] Tegra reboot handler registered. [ 0.372963] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.373083] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.373259] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.373305] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.373434] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.373478] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.373613] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.373657] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.373775] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.373819] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.375934] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.375970] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.376000] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.376031] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.376062] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.376091] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.376133] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.376170] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.376197] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.376224] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.376250] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.376276] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.376302] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.376328] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.376354] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.376380] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.376406] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.376499] mc-err: mcerr ops are set to t19x [ 0.391170] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391194] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.391206] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391218] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397739] ACPI: Interpreter disabled. [ 0.399001] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400329] iommu: Default domain type: Translated [ 0.400398] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400859] SCSI subsystem initialized [ 0.401060] usbcore: registered new interface driver usbfs [ 0.401108] usbcore: registered new interface driver hub [ 0.401150] usbcore: registered new device driver usb [ 0.401546] mc: Linux media interface: v0.10 [ 0.401580] videodev: Linux video capture interface: v2.00 [ 0.401880] pps_core: LinuxPPS API ver. 1 registered [ 0.401891] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401911] PTP clock support registered [ 0.402107] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.402416] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.402499] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.403158] Registered efivars operations [ 0.408517] FPGA manager framework [ 0.408624] Advanced Linux Sound Architecture Driver Initialized. [ 0.409260] Bluetooth: Core ver 2.22 [ 0.409299] NET: Registered protocol family 31 [ 0.409312] Bluetooth: HCI device and connection manager initialized [ 0.409326] Bluetooth: HCI socket layer initialized [ 0.409342] Bluetooth: L2CAP socket layer initialized [ 0.409363] Bluetooth: SCO socket layer initialized [ 0.410964] camchar: rtcpu character device driver loaded [ 0.411740] clocksource: Switched to clocksource arch_sys_counter [ 0.707443] VFS: Disk quotas dquot_6.6.0 [ 0.707524] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.707915] pnp: PnP ACPI: disabled [ 0.719163] la/ptsa driver initialized. [ 0.719318] NET: Registered protocol family 2 [ 0.719518] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.725141] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.725207] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.725555] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.725985] TCP: Hash tables configured (established 65536 bind 65536) [ 0.726109] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.726202] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.726415] NET: Registered protocol family 1 [ 0.727306] RPC: Registered named UNIX socket transport module. [ 0.727365] RPC: Registered udp transport module. [ 0.727382] RPC: Registered tcp transport module. [ 0.727397] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.727422] PCI: CLS 0 bytes, default 64 [ 0.727721] Trying to unpack rootfs image as initramfs... [ 0.990447] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.993583] Freeing initrd memory: 8196K [ 0.998366] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.998405] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.998445] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.998849] kvm [1]: IPA Size Limit: 40 bits [ 0.999473] kvm [1]: vgic interrupt IRQ9 [ 0.999992] kvm [1]: VHE mode initialized successfully [ 1.001889] Initialise system trusted keyrings [ 1.002209] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.011885] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.013073] NFS: Registering the id_resolver key type [ 1.013114] Key type id_resolver registered [ 1.013130] Key type id_legacy registered [ 1.013268] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.013295] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.013372] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.023008] NET: Registered protocol family 38 [ 1.023031] Key type asymmetric registered [ 1.023048] Asymmetric key parser 'x509' registered [ 1.023126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.023391] io scheduler mq-deadline registered [ 1.023419] io scheduler kyber registered [ 1.030272] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.033644] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.033762] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.033910] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.034020] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.034109] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.040718] scrncapt: init (heads:4 wins:6 planes:4) [ 1.040725] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.042027] EINJ: ACPI disabled. [ 1.045615] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.045670] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.045686] tegra-pmc: ### PMC reset level: L1 [ 1.045700] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.045781] tegra-pmc: PMC Prod config success [ 1.051206] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.064437] random: fast init done [ 1.068619] printk: console [ttyTCU0] enabled [ 2.609002] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.613577] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.618165] arm-smmu 10000000.iommu: stage 1 translation [ 2.623963] arm-smmu 10000000.iommu: stage 2 translation [ 2.629160] arm-smmu 10000000.iommu: nested translation [ 2.634753] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.641919] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.653390] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.654752] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.661600] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.669221] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.674378] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.679098] arm-smmu 12000000.iommu: stage 1 translation [ 2.684880] arm-smmu 12000000.iommu: stage 2 translation [ 2.690034] arm-smmu 12000000.iommu: nested translation [ 2.695719] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.702898] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.714295] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.715770] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.722581] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.729806] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.739880] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.742737] tegra_profiler: auth: init [ 2.747232] THERMAL EST: found 3 subdevs [ 2.750417] THERMAL EST num_resources: 0 [ 2.754518] [THERMAL EST subdev 0] [ 2.757584] [THERMAL EST subdev 1] [ 2.761255] [THERMAL EST subdev 2] [ 2.764242] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.770982] THERMAL EST: thz register success. [ 2.775202] THERMAL EST: end of probe, return err: 0 [ 2.780321] nvsciipc: loaded module [ 2.787609] tun: Universal TUN/TAP device driver, 1.6 [ 2.789912] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.796364] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.801613] e1000e: Intel(R) PRO/1000 Network Driver [ 2.806509] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.812840] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.818127] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.824063] PPP generic driver version 2.4.2 [ 2.828319] PPP BSD Compression module registered [ 2.833124] PPP Deflate Compression module registered [ 2.838086] PPP MPPE Compression module registered [ 2.843382] usbcore: registered new interface driver r8152 [ 2.848608] usbcore: registered new interface driver asix [ 2.853955] usbcore: registered new interface driver ax88179_178a [ 2.860086] usbcore: registered new interface driver cdc_ether [ 2.866027] usbcore: registered new interface driver net1080 [ 2.871622] usbcore: registered new interface driver cdc_subset [ 2.877925] usbcore: registered new interface driver zaurus [ 2.883362] usbcore: registered new interface driver cdc_ncm [ 2.889040] usbcore: registered new interface driver aqc111 [ 2.894952] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.901030] ohci-pci: OHCI PCI platform driver [ 2.905049] ohci-platform: OHCI generic platform driver [ 2.910801] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.917131] usbcore: registered new interface driver uas [ 2.921378] usbcore: registered new interface driver usb-storage [ 2.927709] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.933575] mousedev: PS/2 mouse device common for all mice [ 2.938769] usbcore: registered new interface driver xpad [ 2.946611] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.949519] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.957026] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.963629] i2c /dev entries driver [ 2.966896] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.972895] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.978017] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.983371] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.988701] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.994232] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.999925] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.012793] device-mapper: uevent: version 1.0.3 [ 3.013255] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.020133] cpuidle: Initializing cpuidle driver [ 3.024003] sdhci: Secure Digital Host Controller Interface driver [ 3.029112] sdhci: Copyright(c) Pierre Ossman [ 3.033203] Synopsys Designware Multimedia Card Interface Driver [ 3.039101] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.045381] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.045965] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.058488] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.077232] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.086085] vdd-1v0: supplied by regulator-dummy [ 3.091441] vdd-1v8-hs: supplied by regulator-dummy [ 3.096157] vdd-1v8-ls: supplied by regulator-dummy [ 3.100856] vdd-1v8-ao: supplied by regulator-dummy [ 3.104644] vddio-ddr-1v1: supplied by regulator-dummy [ 3.109001] vdd-rtc: supplied by regulator-dummy [ 3.110571] spmic-ldo1: supplied by regulator-dummy [ 3.111778] vdd-ao-3v3: supplied by regulator-dummy [ 3.117814] vddio-emmc-3v3: supplied by regulator-dummy [ 3.124075] spmic-ldo4: supplied by regulator-dummy [ 3.125261] vdd-usb-3v3: supplied by regulator-dummy [ 3.131365] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.137503] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.142915] spmic-ldo8: supplied by vdd-1v8-ls [ 3.144267] gpio-510 (gpio_default): hogged as output/high [ 3.145539] gpio-511 (gpio_default): hogged as output/high [ 3.152211] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.290231] max77686-rtc max77620-rtc: registered as rtc0 [ 3.291196] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.291504] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.987917] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.988881] hid: raw HID events driver (C) Jiri Kosina [ 3.989532] usbcore: registered new interface driver usbhid [ 3.989680] usbhid: USB HID core driver [ 3.991335] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.992511] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.010343] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.086079] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.545 ms) ÿá[ 4.077756] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.078293] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.079543] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.080382] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.081999] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.082634] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.083131] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.084332] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.084650] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.086648] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.094289] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.101266] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.105909] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.112840] denver_knobs_init:MTS_VERSION:55637613 [ 4.125707] t19x_cache tegra-cache: probed [ 4.128751] optee: probing for conduit method. [ 4.129588] optee: revision 3.16 (65cc2218) [ 4.130471] optee: dynamic shared memory is enabled [ 4.133055] optee: initialized driver [ 4.138992] nvpmodel: initialized successfully [ 4.140590] tegra_hv: get_hvd: not initialized yet [ 4.145281] user_ivc_mempool: hypervisor not present [ 4.151181] usbcore: registered new interface driver snd-usb-audio [ 4.157847] u32 classifier [ 4.158771] input device check on [ 4.162492] Actions configured [ 4.166464] Initializing XFRM netlink socket [ 4.171288] NET: Registered protocol family 10 [ 4.179122] Segment Routing with IPv6 [ 4.179471] NET: Registered protocol family 17 [ 4.183025] NET: Registered protocol family 15 [ 4.187175] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.200971] Bluetooth: RFCOMM socket layer initialized [ 4.205372] Bluetooth: RFCOMM ver 1.11 [ 4.209478] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.215083] Bluetooth: HIDP socket layer initialized [ 4.221258] 9pnet: Installing 9P2000 support [ 4.224759] Key type dns_resolver registered [ 4.229919] registered taskstats version 1 [ 4.232947] Loading compiled-in X.509 certificates [ 4.245968] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.249042] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.258948] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.261163] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.269431] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.278081] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.395876] tegra194-pcie 14160000.pcie: Link up [ 4.398947] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.399313] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.399458] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.399847] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.400109] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.401035] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.401667] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.414799] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.415350] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.415909] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.417400] pci 0004:01:00.0: supports D1 D2 [ 4.417560] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.428723] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.429061] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.429291] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.429831] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.430188] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.430509] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.430850] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.438195] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.446364] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.456665] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.461433] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.467095] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.473852] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.483014] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.484287] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.493049] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.501249] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.616727] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.617170] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.617479] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.617784] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.618153] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.618435] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.618984] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.619482] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.641236] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.641616] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.643594] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.644927] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.646427] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.648151] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.649107] pci 0005:00:00.0: Removing from iommu group 7 [ 5.649497] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.682289] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.708590] host1x 13e10000.host1x: initialized [ 5.710603] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.711590] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.713053] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.714135] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.715330] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.716212] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.717709] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.718415] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.720064] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.721039] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.728211] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.734389] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.744641] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.751112] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.760792] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.767857] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.777855] falcon 15340000.vic: Adding to iommu group 17 [ 5.792690] falcon 15340000.vic: initialized [ 5.793891] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.799648] falcon 15380000.nvjpg: initialized [ 5.800518] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.811051] falcon 154c0000.nvenc: initialized [ 5.811641] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.821022] falcon 15a80000.nvenc1: initialized [ 5.821710] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.833779] nvdec 15480000.nvdec: initialized [ 5.834342] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.844011] nvdec 15140000.nvdec1: initialized [ 5.844613] tsec 15500000.tsec: Adding to iommu group 18 [ 5.850132] tsec 15500000.tsec: initialized [ 5.850661] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.858063] tsec 15100000.tsecb: initialized [ 5.862180] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.891080] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.903018] gpio-374 (wifi-enable): hogged as output/high [ 5.903313] gpio-431 (camera-control-output-low): hogged as output/low [ 5.903680] gpio-432 (camera-control-output-low): hogged as output/low [ 5.905504] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.907198] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.907679] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.909102] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.914492] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.920517] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.925749] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.934479] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.941249] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.953243] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.958391] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.963871] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.972665] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.982398] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.989456] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.997158] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.003202] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.012772] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.019080] pva 16000000.pva0: Adding to iommu group 22 [ 6.046111] pva 16000000.pva0: initialized [ 6.052080] pva 16800000.pva1: Adding to iommu group 23 [ 6.064073] pva 16800000.pva1: initialized [ 6.068803] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.083348] nvdla 15880000.nvdla0: initialized [ 6.084873] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.093865] nvdla 158c0000.nvdla1: initialized [ 6.097542] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.097990] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.098015] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.098471] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.098763] tegradc 15200000.display: Adding to iommu group 26 [ 6.098771] tegradccommon 15200000.display-hub: dma mapping done [ 6.098914] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.103034] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.106293] tegradc 15210000.display: Adding to iommu group 26 [ 6.106476] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.106727] generic_infoframe_type: 0x87 [ 6.106822] tegradc 15200000.display: DT parsed successfully [ 6.106897] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.108792] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.115830] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.120558] tegra_cec 3960000.tegra_cec: probed [ 6.121843] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.124464] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.124475] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.125438] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.133244] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.138529] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.144798] kfuse 3830000.kfuse: initialized [ 6.154316] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.157901] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.166601] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.171308] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.180172] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.186559] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.194030] tegradc 15210000.display: disp0 connected to head1->sor [ 6.213207] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.220116] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.228725] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.233380] tegradc 15210000.display: DT parsed successfully [ 6.252675] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.261640] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.270229] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.303480] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.323490] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.323981] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.326719] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.334687] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.343722] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.350287] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.357495] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.364746] usb usb1: Product: xHCI Host Controller [ 6.370018] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.376346] usb usb1: SerialNumber: 3610000.xhci [ 6.382055] hub 1-0:1.0: USB hub found [ 6.384892] hub 1-0:1.0: 4 ports detected [ 6.389619] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.394243] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.401585] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.409254] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.417447] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.424687] usb usb2: Product: xHCI Host Controller [ 6.429393] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.435650] usb usb2: SerialNumber: 3610000.xhci [ 6.441305] hub 2-0:1.0: USB hub found [ 6.444347] hub 2-0:1.0: 4 ports detected [ 6.492564] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.498755] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.500442] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.500612] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.514104] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.515250] tegra194-cpufreq ccplex: probed with BWMGR [ 6.516661] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.517137] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.517654] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.518935] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.526701] tegra194-vi5 15c10000.vi: initialized [ 6.527906] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.528157] generic_infoframe_type: 0x87 [ 6.528346] tegradc 15200000.display: DT parsed successfully [ 6.528431] mmc0: CQHCI version 5.10 [ 6.529431] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.529678] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.529683] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.529690] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.529694] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.529699] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.534218] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.535811] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.535819] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.535823] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.539257] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.544520] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.558532] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.558541] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.566422] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.572086] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.577871] nvethernet 2490000.ethernet: Macsec not supported [ 6.579255] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.586278] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.593361] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.599688] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.606565] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.652261] mmc0: Command Queue Engine enabled [ 6.658290] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.665966] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.666617] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.666622] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.673388] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.677580] mmc0: periodic cache flush enabled [ 6.697811] tegradc 15200000.display: probed [ 6.700402] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.750900] tegra-se-nvhost 15810000.se: initialized [ 6.751862] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.760263] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.772010] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.774235] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.780485] tegra-se-nvhost 15820000.se: initialized [ 6.782111] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.786825] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.799259] Console: switching to colour frame buffer device 240x67 [ 6.799448] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.805038] tegradc 15200000.display: fb registered [ 6.812186] tegra-se-nvhost 15830000.se: initialized [ 6.816190] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.822378] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.827711] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.833399] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.839117] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.846003] tegra-se-nvhost 15840000.se: initialized [ 6.857904] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.864225] tegra_actmon d230000.actmon: in actmon_register()... [ 6.868188] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.873943] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.882436] hvc_sysfs: hypervisor is not present [ 6.913691] random: crng init done [ 6.914988] ALSA device list: [ 6.915129] No soundcards found. [ 6.918939] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.919179] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.919244] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.919396] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.925173] usb 1-2: Manufacturer: Generic [ 6.929940] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.931224] hub 1-2:1.0: USB hub found [ 6.937325] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.949431] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.950241] hub 1-2:1.0: 4 ports detected [ 6.956306] Extcon AUX1(HDMI) enable [ 6.956452] tegradc 15210000.display: disp1 connected to head1->sor [ 6.970243] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.977549] tegradc 15210000.display: DT parsed successfully [ 6.983131] tegradc 15210000.display: Display dc.000000003739e8d4 registered with id=1 [ 6.991243] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.997254] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.010223] tegradc 15210000.display: probed [ 7.010604] tegradc 15210000.display: fb registered [ 7.016094] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.020025] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.022043] Freeing unused kernel memory: 3968K [ 7.027638] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.036678] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.045161] tegradc 15210000.display: blank - powerdown [ 7.050558] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.051995] Run /init as init process [ 7.058771] Extcon DP: HPD disabled [ 7.065679] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.065689] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.065714] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.081487] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.093829] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.093834] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.093837] usb 2-3: Manufacturer: Generic [ 7.104835] hub 2-3:1.0: USB hub found ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.113935] tegradc 15200000.display: blank - powerdown [ 7.115936] hub 2-3:1.0: 4 ports detected [ 7.135820] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.152979] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.153003] Extcon AUX1(HDMI) disable [ 7.158166] Root device found: mmcblk0p1 [ 7.160274] Found dev node: /dev/mmcblk0p1 [ 7.176478] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.177399] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.190456] tegradc 15200000.display: unblank [ 7.191554] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.191767] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.196034] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.198146] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.199778] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.199992] Rootfs mounted over mmcblk0p1 [ 7.200056] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.200537] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.200542] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.204165] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.204170] Extcon AUX1(HDMI) enable [ 7.216844] tegradc 15200000.display: sync windows ret = 247 [ 7.227915] Switching from initrd to actual rootfs [ 7.258954] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.266230] Extcon HDMI: HPD enabled [ 7.270169] tegradc 15200000.display: hdmi: plugged [ 7.352917] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.354322] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.355675] usb 1-3: Product: Bluetooth Radio [ 7.356991] usb 1-3: Manufacturer: Realtek [ 7.358253] usb 1-3: SerialNumber: 00e04c000001 [ 7.410584] systemd[1]: System time before build time, advancing clock. [ 7.481592] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.486444] systemd[1]: Detected architecture arm64. [ 7.529614] systemd[1]: Set hostname to . [ 7.687939] systemd-sysv-generator[242]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.031938] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.033669] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.039378] systemd[1]: Created slice system-modprobe.slice. [ 8.044047] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.048470] systemd[1]: Created slice User and Session Slice. [ 8.051905] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.056167] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.059459] systemd[1]: Reached target User and Group Name Lookups. [ 8.062606] systemd[1]: Reached target Slices. [ 8.065592] systemd[1]: Reached target Swap. [ 8.070974] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.076389] systemd[1]: Listening on Syslog Socket. [ 8.082391] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.088214] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.094914] systemd[1]: Listening on Journal Audit Socket. [ 8.100714] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.104415] systemd[1]: Listening on Journal Socket. [ 8.108070] systemd[1]: Listening on udev Control Socket. [ 8.111470] systemd[1]: Listening on udev Kernel Socket. [ 8.120352] systemd[1]: Mounting Huge Pages File System... [ 8.128822] systemd[1]: Mounting POSIX Message Queue File System... [ 8.137051] systemd[1]: Mounting RPC Pipe File System... [ 8.145923] systemd[1]: Mounting Kernel Debug File System... [ 8.155933] systemd[1]: Mounting Kernel Trace File System... [ 8.167310] systemd[1]: Starting Journal Service... [ 8.177688] systemd[1]: Starting Set the console keyboard layout... [ 8.185968] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.189424] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.196099] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.204176] systemd[1]: Started Nameserver information manager. [ 8.209268] systemd[1]: Reached target Network (Pre). [ 8.218013] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.219939] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.228102] systemd[1]: Starting Load Kernel Modules... [ 8.236428] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.244259] systemd[1]: Starting udev Coldplug all Devices... [ 8.255976] systemd[1]: Mounted Huge Pages File System. [ 8.259577] systemd[1]: Mounted POSIX Message Queue File System. [ 8.263132] systemd[1]: Mounted RPC Pipe File System. [ 8.266594] systemd[1]: Mounted Kernel Debug File System. [ 8.267957] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.272543] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.274401] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.274826] systemd[1]: Mounted Kernel Trace File System. [ 8.276092] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.278778] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.278782] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.279074] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.280433] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.285224] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.285235] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.301148] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.306034] systemd[1]: nvfb-udev.service: Succeeded. [ 8.310383] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.321183] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.333343] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.335066] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.343375] systemd[1]: Starting Load/Save Random Seed... [ 8.352358] systemd[1]: Starting Create System Users... [ 8.393447] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.393447] [ 8.400792] systemd[1]: Finished Load/Save Random Seed. [ 8.419295] systemd[1]: Finished Create System Users. [ 8.425571] systemd[1]: Finished Load Kernel Modules. [ 8.429693] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.437450] systemd[1]: Mounting Kernel Configuration File System... [ 8.445520] systemd[1]: Started OP-TEE Client Supplicant. [ 8.453838] systemd[1]: Starting Apply Kernel Variables... [ 8.461540] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.471638] systemd[1]: Finished Set the console keyboard layout. [ 8.479580] systemd[1]: Mounted Kernel Configuration File System. [ 9.782693] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.789279] imx219 9-0010: board setup failed [ 9.790450] imx219: probe of 9-0010 failed with error -121 [ 9.817932] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.827894] imx219 10-0010: board setup failed [ 9.829148] imx219: probe of 10-0010 failed with error -121 [ 9.966824] hot-surface-alert cooling state: 0 -> 1 [ 10.279479] using random self ethernet address [ 10.280726] using random host ethernet address [ 11.750702] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.752400] Creating 1 MTD partitions on "spi6.0": [ 11.753955] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.047569] using random self ethernet address [ 12.049208] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.776798] nvidia: loading out-of-tree module taints kernel. [ 58.893832] watchdog: watchdog0: watchdog did not stop! [ 59.344883] Trying to unregister non-registered hwtime source [ 62.402475] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.404018] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.045] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.086] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.107] I> Temperature = 68000 [0000.110] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.201] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.928] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.939] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.961] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.327] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.340] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.341] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.342] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.342] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.343] I> dram_block larger than 80000000 [0002.345] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.357] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.360] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuration miÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized entering main console loop ] bpmp: init complete ÿäght be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.212] I> Welcome to NVDisp-Init [0003.212] I> NVDisp-Init version: t194-f9ecfedc [0003.213] I> CPU-BL Params @ 0xca020000 [0003.213] I> 0) Base:0x00000000 Size:0x00000000 [0003.213] I> 1) Base:0xc8300000 Size:0x00100000 [0003.214] I> 2) Base:0xc9800000 Size:0x00200000 [0003.214] I> 3) Base:0xc8600000 Size:0x00200000 [0003.216] I> 4) Base:0xc8200000 Size:0x00100000 [0003.221] I> 5) Base:0xc8100000 Size:0x00100000 [0003.225] I> 6) Base:0xc9400000 Size:0x00400000 [0003.230] I> 7) Base:0xc9000000 Size:0x00400000 [0003.234] I> 8) Base:0xc8000000 Size:0x00100000 [0003.239] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.243] I> 10) Base:0xca800000 Size:0x00800000 [0003.248] I> 11) Base:0x40000000 Size:0x00040000 [0003.252] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.257] I> 13) Base:0x40046000 Size:0x00002000 [0003.261] I> 14) Base:0x40048000 Size:0x00002000 [0003.265] I> 15) Base:0xaf000000 Size:0x00004000 [0003.270] I> 16) Base:0x4004a000 Size:0x00002000 [0003.274] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.279] I> 18) Base:0x4004c000 Size:0x00002000 [0003.283] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.288] I> 20) Base:0x4004e000 Size:0x00002000 [0003.292] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.297] I> 22) Base:0x00000000 Size:0x00000000 [0003.301] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.306] I> 24) Base:0xcc000000 Size:0x02000000 [0003.310] I> 25) Base:0x40050000 Size:0x00002000 [0003.315] I> 26) Base:0x40040000 Size:0x00006000 [0003.319] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.324] I> 28) Base:0xc8400000 Size:0x00200000 [0003.328] I> 29) Base:0xc8800000 Size:0x00400000 [0003.332] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.337] I> 31) Base:0x00000000 Size:0x00000000 [0003.341] I> 32) Base:0xf8000000 Size:0x08000000 [0003.346] I> 33) Base:0xce000000 Size:0x2a000000 [0003.350] I> 34) Base:0xcb000000 Size:0x01000000 [0003.355] I> 35) Base:0xae000000 Size:0x01000000 [0003.359] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.364] I> 37) Base:0xca000000 Size:0x00800000 [0003.368] I> 38) Base:0x80000000 Size:0x20000000 [0003.373] I> 39) Base:0xb0000000 Size:0x08000000 [0003.377] I> 40) Base:0x00000000 Size:0x00000000 [0003.382] I> 41) Base:0x00000000 Size:0x00000000 [0003.386] I> 42) Base:0x00000000 Size:0x00000000 [0003.390] I> 43) Base:0x00000000 Size:0x00000000 [0003.395] I> 44) Base:0x00000000 Size:0x00000000 [0003.399] I> 45) Base:0x00000000 Size:0x00000000 [0003.404] GIC-SPI Target CPU: 0 [0003.407] Interrupts Init done [0003.410] calling constructors [0003.413] initializing heap [0003.415] I> Heap: [0xa0960000 ... 0xadf00000] [0003.419] initializing threads [0003.422] initializing timers [0003.425] creating bootstrap completion thread [0003.429] top of bootstrap2() [0003.432] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.437] initializing platform [0003.440] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.445] W> device prod register failed [0003.449] I> Bl_dtb @0xadf00000 [0003.452] I> gpio framework initialized [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.469] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.475] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.496] I> Boot_device: QSPI_FLASH instance: 0 [0003.501] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.511] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.519] I> QSPI source rate = 204000 Khz [0003.522] I> Requested rate for QSPI clock = 34000 Khz [0003.527] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.532] I> tx_clk_tap_delay : 0 [0003.535] I> rx_clk_tap_delay : 16 [0003.538] I> QSPI Flash Size = 32 MB [0003.546] I> Qspi initialized successfully [0003.546] I> qspi flash-0 params source = boot args [0003.551] W> No board IDs available [0003.553] E> Failed to get board id info! [0003.559] I> sdmmc-3 params source = safe params [0003.566] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.568] W> Cannot find any partition table for 00000003 [0003.572] E> Failed to publish 00000003 [0003.577] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.613] I> regulator 'vdd-hdmi-5v0' already enabled [0003.613] I> hdmi cable connected [0003.620] W> set volts not configured for 'vdd-1v0' [0003.625] W> set volts not configured for 'vdd-1v8-hs' [0003.625] I> retrieved tmds range from prod_list_hdmi_soc [0003.632] E> invalid display type [0003.633] E> cannot find any other nvdisp nodes [0003.649] I> edid read success [0003.661] I> edid read success [0003.662] I> width = 640, height = 480, frequency = 25174825 [0003.662] I> width = 1920, height = 1080, frequency = 148500000 [0003.662] I> width = 1280, height = 768, frequency = 79500000 [0003.663] I> width = 1360, height = 768, frequency = 85500000 [0003.663] I> width = 720, height = 480, frequency = 26973026 [0003.667] I> width = 720, height = 576, frequency = 26973026 [0003.673] I> width = 1280, height = 720, frequency = 74175824 [0003.678] I> width = 1280, height = 720, frequency = 74175824 [0003.684] I> width = 1920, height = 1080, frequency = 148351648 [0003.690] I> width = 1920, height = 1080, frequency = 148351648 [0003.696] I> width = 720, height = 480, frequency = 26973026 [0003.701] I> width = 720, height = 576, frequency = 26973026 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 3840, height = 2160, frequency = 296703296 [0003.724] I> width = 3840, height = 2160, frequency = 296703296 [0003.730] I> width = 4096, height = 2160, frequency = 296703296 [0003.735] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.747] I> hdmi_enable, starting HDMI initialisation [0003.751] I> hdmi_enable, HDMI initialisation complete [0003.761] initializing target [0003.762] calling apps_init() [0003.763] starting app kernel_boot_app [0003.764] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000669] Console: colour dummy device 80x25 [ 0.002143] printk: console [tty0] enabled [ 0.002205] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002239] pid_max: default: 32768 minimum: 301 [ 0.002409] LSM: Security Framework initializing [ 0.002465] Yama: becoming mindful. [ 0.002506] SELinux: Initializing. [ 0.002654] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002690] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005511] rcu: Hierarchical SRCU implementation. [ 0.005833] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006497] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006544] DTB Build time: Aug 10 2022 20:31:49 [ 0.009178] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009430] Remapping and enabling EFI services. [ 0.011312] smp: Bringing up secondary CPUs ... [ 0.040443] Detected PIPT I-cache on CPU1 [ 0.040540] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072015] Detected PIPT I-cache on CPU2 [ 0.072235] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101730] Detected PIPT I-cache on CPU3 [ 0.101871] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131553] Detected PIPT I-cache on CPU4 [ 0.131708] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161415] Detected PIPT I-cache on CPU5 [ 0.161571] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161968] smp: Brought up 1 node, 6 CPUs [ 0.162182] SMP: Total of 6 processors activated. [ 0.162246] CPU features: detected: Privileged Access Never [ 0.162288] CPU features: detected: LSE atomic instructions [ 0.162301] CPU features: detected: User Access Override [ 0.162315] CPU features: detected: 32-bit EL0 Support [ 0.162328] CPU features: detected: RAS Extension Support [ 0.162341] CPU features: detected: CRC32 instructions [ 0.162354] CPU features: detected: 32-bit EL1 Support [ 0.233756] CPU: All CPU(s) started at EL2 [ 0.239888] devtmpfs: initialized [ 0.292389] Registered cp15_barrier emulation handler [ 0.292510] Registered setend emulation handler [ 0.292530] KASLR enabled [ 0.292855] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.292883] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.294199] pinctrl core: initialized pinctrl subsystem [ 0.295148] SMBIOS 3.0.0 present. [ 0.295179] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.295813] NET: Registered protocol family 16 [ 0.297738] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.298233] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.298931] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.298989] audit: initializing netlink subsys (disabled) [ 0.299237] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.299631] thermal_sys: Registered thermal governor 'step_wise' [ 0.299639] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299654] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.302763] cpuidle: using governor menu [ 0.303105] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.303497] ASID allocator initialised with 32768 entries [ 0.303746] Serial: AMBA PL011 UART driver [ 0.306930] Tegra reboot handler registered. [ 0.379650] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.379775] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.379955] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.380016] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.380182] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.380243] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.380363] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.380409] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.380527] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.380570] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.383125] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.383176] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.383210] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.383250] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.383281] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.383310] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.383348] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.383403] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.383428] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.383471] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.383496] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.383537] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.383562] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.383586] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.383611] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.383635] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.383663] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.383756] mc-err: mcerr ops are set to t19x [ 0.397437] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.397462] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.397476] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.397488] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.404394] ACPI: Interpreter disabled. [ 0.405720] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.407299] iommu: Default domain type: Translated [ 0.407379] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.407825] SCSI subsystem initialized [ 0.408005] usbcore: registered new interface driver usbfs [ 0.408054] usbcore: registered new interface driver hub [ 0.408100] usbcore: registered new device driver usb [ 0.408621] mc: Linux media interface: v0.10 [ 0.408653] videodev: Linux video capture interface: v2.00 [ 0.408975] pps_core: LinuxPPS API ver. 1 registered [ 0.408987] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.409007] PTP clock support registered [ 0.409275] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.409599] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.409685] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.410582] Registered efivars operations [ 0.415816] FPGA manager framework [ 0.415945] Advanced Linux Sound Architecture Driver Initialized. [ 0.416551] Bluetooth: Core ver 2.22 [ 0.416591] NET: Registered protocol family 31 [ 0.416602] Bluetooth: HCI device and connection manager initialized [ 0.416617] Bluetooth: HCI socket layer initialized [ 0.416632] Bluetooth: L2CAP socket layer initialized [ 0.416656] Bluetooth: SCO socket layer initialized [ 0.418205] camchar: rtcpu character device driver loaded [ 0.418967] clocksource: Switched to clocksource arch_sys_counter [ 0.818387] VFS: Disk quotas dquot_6.6.0 [ 0.818483] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.818919] pnp: PnP ACPI: disabled [ 0.834759] la/ptsa driver initialized. [ 0.834918] NET: Registered protocol family 2 [ 0.835220] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.844567] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.844664] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.845031] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.845689] TCP: Hash tables configured (established 65536 bind 65536) [ 0.845854] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.845988] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.846260] NET: Registered protocol family 1 [ 0.847235] RPC: Registered named UNIX socket transport module. [ 0.847267] RPC: Registered udp transport module. [ 0.847285] RPC: Registered tcp transport module. [ 0.847301] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.847329] PCI: CLS 0 bytes, default 64 [ 0.847602] Trying to unpack rootfs image as initramfs... [ 1.112203] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.115258] Freeing initrd memory: 8196K [ 1.119696] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.119761] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.119808] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.120292] kvm [1]: IPA Size Limit: 40 bits [ 1.120935] kvm [1]: vgic interrupt IRQ9 [ 1.121546] kvm [1]: VHE mode initialized successfully [ 1.123348] Initialise system trusted keyrings [ 1.123668] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.131382] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.132295] NFS: Registering the id_resolver key type [ 1.132329] Key type id_resolver registered [ 1.132344] Key type id_legacy registered [ 1.132433] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.132457] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.132497] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.142405] NET: Registered protocol family 38 [ 1.142429] Key type asymmetric registered [ 1.142445] Asymmetric key parser 'x509' registered [ 1.142540] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.142817] io scheduler mq-deadline registered [ 1.142837] io scheduler kyber registered [ 1.148627] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.151718] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.151800] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.151873] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.151944] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.152015] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.157293] scrncapt: init (heads:4 wins:6 planes:4) [ 1.157411] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.158480] EINJ: ACPI disabled. [ 1.161829] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.161854] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.161891] tegra-pmc: ### PMC reset level: L1 [ 1.161905] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.161955] tegra-pmc: PMC Prod config success [ 1.167404] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.193031] random: fast init done [ 1.195640] printk: console [ttyTCU0] enabled [ 2.724448] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.729203] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.733668] arm-smmu 10000000.iommu: stage 1 translation [ 2.739456] arm-smmu 10000000.iommu: stage 2 translation [ 2.744686] arm-smmu 10000000.iommu: nested translation [ 2.750027] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.757457] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.767125] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.770567] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.776889] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.784484] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.790189] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.794645] arm-smmu 12000000.iommu: stage 1 translation [ 2.800418] arm-smmu 12000000.iommu: stage 2 translation [ 2.805581] arm-smmu 12000000.iommu: nested translation [ 2.811010] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.818452] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.828280] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.831568] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.838150] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.845323] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.855593] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.858547] tegra_profiler: auth: init [ 2.862752] THERMAL EST: found 3 subdevs [ 2.866231] THERMAL EST num_resources: 0 [ 2.869812] [THERMAL EST subdev 0] [ 2.873138] [THERMAL EST subdev 1] [ 2.876803] [THERMAL EST subdev 2] [ 2.880048] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.886235] THERMAL EST: thz register success. [ 2.890738] THERMAL EST: end of probe, return err: 0 [ 2.896043] nvsciipc: loaded module [ 2.902371] tun: Universal TUN/TAP device driver, 1.6 [ 2.905365] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.911827] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.917414] e1000e: Intel(R) PRO/1000 Network Driver [ 2.922300] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.928142] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.933674] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.939907] PPP generic driver version 2.4.2 [ 2.944109] PPP BSD Compression module registered [ 2.948395] PPP Deflate Compression module registered [ 2.953902] PPP MPPE Compression module registered [ 2.958932] usbcore: registered new interface driver r8152 [ 2.964438] usbcore: registered new interface driver asix [ 2.969501] usbcore: registered new interface driver ax88179_178a [ 2.975634] usbcore: registered new interface driver cdc_ether [ 2.981824] usbcore: registered new interface driver net1080 [ 2.987424] usbcore: registered new interface driver cdc_subset [ 2.993212] usbcore: registered new interface driver zaurus [ 2.998904] usbcore: registered new interface driver cdc_ncm [ 3.004836] usbcore: registered new interface driver aqc111 [ 3.010186] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.016567] ohci-pci: OHCI PCI platform driver [ 3.020851] ohci-platform: OHCI generic platform driver [ 3.026299] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.032640] usbcore: registered new interface driver uas [ 3.036903] usbcore: registered new interface driver usb-storage [ 3.043016] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.049249] mousedev: PS/2 mouse device common for all mice [ 3.054053] usbcore: registered new interface driver xpad [ 3.061875] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.065096] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.072851] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.079068] i2c /dev entries driver [ 3.082404] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.088173] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.093896] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.098984] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.104537] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.109806] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.115225] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.128150] device-mapper: uevent: version 1.0.3 [ 3.128573] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.135746] cpuidle: Initializing cpuidle driver [ 3.139341] sdhci: Secure Digital Host Controller Interface driver [ 3.144397] sdhci: Copyright(c) Pierre Ossman [ 3.148749] Synopsys Designware Multimedia Card Interface Driver [ 3.154636] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.160615] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.161167] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.173699] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.192260] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.201304] vdd-1v0: supplied by regulator-dummy [ 3.206605] vdd-1v8-hs: supplied by regulator-dummy [ 3.211258] vdd-1v8-ls: supplied by regulator-dummy [ 3.215937] vdd-1v8-ao: supplied by regulator-dummy [ 3.219687] vddio-ddr-1v1: supplied by regulator-dummy [ 3.224014] vdd-rtc: supplied by regulator-dummy [ 3.225543] spmic-ldo1: supplied by regulator-dummy [ 3.226671] vdd-ao-3v3: supplied by regulator-dummy [ 3.232702] vddio-emmc-3v3: supplied by regulator-dummy [ 3.238793] spmic-ldo4: supplied by regulator-dummy [ 3.239974] vdd-usb-3v3: supplied by regulator-dummy [ 3.245960] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.251988] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.257394] spmic-ldo8: supplied by vdd-1v8-ls [ 3.258732] gpio-510 (gpio_default): hogged as output/high [ 3.260922] gpio-511 (gpio_default): hogged as output/high [ 3.267511] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.406123] max77686-rtc max77620-rtc: registered as rtc0 [ 3.407353] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.407626] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.118839] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.119838] hid: raw HID events driver (C) Jiri Kosina [ 4.120601] usbcore: registered new interface driver usbhid [ 4.120746] usbhid: USB HID core driver [ 4.122482] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.123648] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.181670] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.257134] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 76.274 ms) ÿá[ 4.208596] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.209158] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.210072] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.210749] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.212665] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.213327] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.213964] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.215562] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.215906] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.217814] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.225068] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.231985] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.236620] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.242357] denver_knobs_init:MTS_VERSION:55637613 [ 4.255943] t19x_cache tegra-cache: probed [ 4.259708] optee: probing for conduit method. [ 4.260540] optee: revision 3.16 (65cc2218) [ 4.261560] optee: dynamic shared memory is enabled [ 4.263955] optee: initialized driver [ 4.270183] nvpmodel: initialized successfully [ 4.271348] tegra_hv: get_hvd: not initialized yet [ 4.276228] user_ivc_mempool: hypervisor not present [ 4.282361] usbcore: registered new interface driver snd-usb-audio [ 4.288184] u32 classifier [ 4.289943] input device check on [ 4.293646] Actions configured [ 4.297107] Initializing XFRM netlink socket [ 4.302015] NET: Registered protocol family 10 [ 4.308870] Segment Routing with IPv6 [ 4.309567] NET: Registered protocol family 17 [ 4.313618] NET: Registered protocol family 15 [ 4.318252] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.331457] Bluetooth: RFCOMM socket layer initialized [ 4.336244] Bluetooth: RFCOMM ver 1.11 [ 4.340383] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.345973] Bluetooth: HIDP socket layer initialized [ 4.352095] 9pnet: Installing 9P2000 support [ 4.355696] Key type dns_resolver registered [ 4.360862] registered taskstats version 1 [ 4.364132] Loading compiled-in X.509 certificates [ 4.375924] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.380489] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.390811] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.392145] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.400354] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.409079] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.523041] tegra194-pcie 14160000.pcie: Link up [ 4.525664] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.525851] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.525971] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.526159] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.526319] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.526635] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.527071] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.536896] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.537766] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.538260] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.539831] pci 0004:01:00.0: supports D1 D2 [ 4.540055] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.548661] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.549123] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.549345] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.549774] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.550062] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.551588] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.557645] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.565241] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.573759] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.584048] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.588493] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.594199] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.600663] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.609634] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.611499] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.620196] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.628410] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.731130] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.731669] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.731953] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.732098] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.732384] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.732576] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.732961] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.733398] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.747909] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.748239] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.749664] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.750737] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.752428] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.753942] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.754838] pci 0005:00:00.0: Removing from iommu group 7 [ 5.755309] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.784913] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.807294] host1x 13e10000.host1x: initialized [ 5.809052] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.809940] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.811214] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.811936] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.812973] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.813589] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.814590] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.815293] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.824187] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.831374] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.841363] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.848200] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.858239] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.865197] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.875382] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.882066] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.892106] falcon 15340000.vic: Adding to iommu group 17 [ 5.906661] falcon 15340000.vic: initialized [ 5.907692] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.912921] falcon 15380000.nvjpg: initialized [ 5.913548] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.924256] falcon 154c0000.nvenc: initialized [ 5.924916] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.935137] falcon 15a80000.nvenc1: initialized [ 5.935727] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.948346] nvdec 15480000.nvdec: initialized [ 5.948969] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.957868] nvdec 15140000.nvdec1: initialized [ 5.958345] tsec 15500000.tsec: Adding to iommu group 18 [ 5.963702] tsec 15500000.tsec: initialized [ 5.964124] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.971803] tsec 15100000.tsecb: initialized [ 5.975308] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.001335] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.013257] gpio-374 (wifi-enable): hogged as output/high [ 6.013565] gpio-431 (camera-control-output-low): hogged as output/low [ 6.013883] gpio-432 (camera-control-output-low): hogged as output/low [ 6.015817] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.017975] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.018624] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.023705] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.028600] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.034329] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.040202] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.048470] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.055650] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.067116] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.072646] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.078188] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.087286] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.096467] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.103728] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.111158] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.117577] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.127185] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.133449] pva 16000000.pva0: Adding to iommu group 22 [ 6.159117] pva 16000000.pva0: initialized [ 6.163607] pva 16800000.pva1: Adding to iommu group 23 [ 6.173656] pva 16800000.pva1: initialized [ 6.177681] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.189942] nvdla 15880000.nvdla0: initialized [ 6.191308] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.200362] nvdla 158c0000.nvdla1: initialized [ 6.204066] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.204263] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.204337] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.204648] tegradc 15200000.display: Adding to iommu group 26 [ 6.204689] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.204792] tegradccommon 15200000.display-hub: dma mapping done [ 6.206875] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.214128] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.214137] tegradc 15210000.display: Adding to iommu group 26 [ 6.217749] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.223822] generic_infoframe_type: 0x87 [ 6.229459] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.235126] tegradc 15200000.display: DT parsed successfully [ 6.238886] tegra_cec 3960000.tegra_cec: probed [ 6.245062] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.251751] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.269919] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.271218] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.277107] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.277117] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.292473] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.300832] kfuse 3830000.kfuse: initialized [ 6.306005] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.317243] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.317630] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.333850] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.341400] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.341642] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.354535] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.355019] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.363109] tegradc 15210000.display: disp0 connected to head1->sor [ 6.371477] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.376213] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.382461] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.389185] tegradc 15210000.display: DT parsed successfully [ 6.398629] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.403220] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.417858] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.437385] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.437747] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.441008] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.449178] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.457861] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.464582] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.472110] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.479574] usb usb1: Product: xHCI Host Controller [ 6.484147] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.490716] usb usb1: SerialNumber: 3610000.xhci [ 6.496180] hub 1-0:1.0: USB hub found [ 6.499387] hub 1-0:1.0: 4 ports detected [ 6.503950] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.508729] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.516303] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.524067] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.531924] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.538915] usb usb2: Product: xHCI Host Controller [ 6.544072] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.550047] usb usb2: SerialNumber: 3610000.xhci [ 6.555644] hub 2-0:1.0: USB hub found [ 6.558745] hub 2-0:1.0: 4 ports detected [ 6.598130] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.603848] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.605072] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.605245] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.618292] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1904000 KHz, changing to: 1907200 KHz [ 6.619302] tegra194-cpufreq ccplex: probed with BWMGR [ 6.620621] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.621402] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.621882] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.623303] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.634005] mmc0: CQHCI version 5.10 [ 6.635495] tegra194-vi5 15c10000.vi: initialized [ 6.637240] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.638146] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.642618] generic_infoframe_type: 0x87 [ 6.648860] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.652813] tegradc 15200000.display: DT parsed successfully [ 6.660658] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.666206] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.672720] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.681911] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.687583] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.695790] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.702453] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.708579] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.710400] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.710840] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.732910] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.738998] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.745250] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.751889] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.758111] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.770590] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.771036] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.790660] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.800073] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.801390] tegradc 15200000.display: probed [ 6.810161] nvethernet 2490000.ethernet: Macsec not supported [ 6.816881] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.825259] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.829641] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.836704] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.844596] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.846003] mmc0: Command Queue Engine enabled [ 6.851378] tegra-se-nvhost 15810000.se: initialized [ 6.853903] mmc0: periodic cache flush enabled [ 6.863295] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.863898] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.870493] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.876367] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.880776] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.887653] tegra-se-nvhost 15820000.se: initialized [ 6.899272] Console: switching to colour frame buffer device 240x67 [ 6.900917] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.905358] tegradc 15200000.display: fb registered [ 6.905400] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.905423] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.906326] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.906564] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.911860] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.948922] tegra-se-nvhost 15830000.se: initialized [ 6.954157] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.955023] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.959790] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.967650] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.967655] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.967658] usb 1-2: Manufacturer: Generic [ 6.969768] hub 1-2:1.0: USB hub found [ 6.973219] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.974349] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.974818] tegra-se-nvhost 15840000.se: initialized [ 6.982097] hub 1-2:1.0: 4 ports detected [ 6.982476] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.983995] tegra_actmon d230000.actmon: in actmon_register()... [ 6.984164] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.985536] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.987180] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.987740] hvc_sysfs: hypervisor is not present [ 7.015011] ALSA device list: [ 7.016514] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.019714] No soundcards found. [ 7.070905] Extcon AUX1(HDMI) enable [ 7.074657] tegradc 15210000.display: disp1 connected to head1->sor [ 7.080907] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.088169] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.095057] tegradc 15210000.display: DT parsed successfully [ 7.101406] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.109325] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.115441] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.128328] tegradc 15210000.display: probed [ 7.128644] tegradc 15210000.display: fb registered [ 7.132603] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.134200] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.139169] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.140940] Freeing unused kernel memory: 3968K [ 7.146683] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.153764] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.153772] usb 2-3: Manufacturer: Generic [ 7.158506] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.177375] hub 2-3:1.0: USB hub found [ 7.184586] tegradc 15210000.display: blank - powerdown [ 7.186482] hub 2-3:1.0: 4 ports detected [ 7.187112] Run /init as init process [ 7.189490] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.205357] Extcon DP: HPD disabled [ 7.209100] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.215975] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.221547] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.244401] tegradc 15200000.display: blank - powerdown [ 7.251009] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.257301] Root device found: mmcblk0p1 [ 7.259340] Found dev node: /dev/mmcblk0p1 [ 7.263026] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.290380] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.290385] Extcon AUX1(HDMI) disable [ 7.294661] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.298580] Rootfs mounted over mmcblk0p1 [ 7.313864] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.314832] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.327577] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.327584] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.328269] tegradc 15200000.display: unblank [ 7.329386] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.329590] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.330085] Switching from initrd to actual rootfs [ 7.335656] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.337675] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.341662] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.341665] Extcon AUX1(HDMI) enable [ 7.354455] tegradc 15200000.display: sync windows ret = 247 [ 7.395773] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.400180] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.401509] Extcon HDMI: HPD enabled [ 7.409735] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.413566] tegradc 15200000.display: hdmi: plugged [ 7.420654] usb 1-3: Product: Bluetooth Radio [ 7.429932] usb 1-3: Manufacturer: Realtek [ 7.434130] usb 1-3: SerialNumber: 00e04c000001 [ 7.480824] systemd[1]: System time before build time, advancing clock. [ 7.553892] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.558741] systemd[1]: Detected architecture arm64. [ 7.606097] systemd[1]: Set hostname to . [ 7.768982] systemd-sysv-generator[237]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.121486] random: systemd: uninitialized urandom read (16 bytes read) [ 8.123250] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.124845] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.130473] systemd[1]: Created slice system-modprobe.slice. [ 8.134026] random: systemd: uninitialized urandom read (16 bytes read) [ 8.136644] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.139774] random: systemd: uninitialized urandom read (16 bytes read) [ 8.142425] systemd[1]: Created slice User and Session Slice. [ 8.145976] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.150223] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.153677] systemd[1]: Reached target User and Group Name Lookups. [ 8.156899] systemd[1]: Reached target Slices. [ 8.160048] systemd[1]: Reached target Swap. [ 8.164016] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.167760] systemd[1]: Listening on Syslog Socket. [ 8.171331] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.174771] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.179076] systemd[1]: Listening on Journal Audit Socket. [ 8.182657] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.186422] systemd[1]: Listening on Journal Socket. [ 8.190093] systemd[1]: Listening on udev Control Socket. [ 8.193594] systemd[1]: Listening on udev Kernel Socket. [ 8.203266] systemd[1]: Mounting Huge Pages File System... [ 8.213077] systemd[1]: Mounting POSIX Message Queue File System... [ 8.221539] systemd[1]: Mounting RPC Pipe File System... [ 8.227556] random: crng init done [ 8.229071] random: 7 urandom warning(s) missed due to ratelimiting [ 8.230090] systemd[1]: Mounting Kernel Debug File System... [ 8.239196] systemd[1]: Mounting Kernel Trace File System... [ 8.248930] systemd[1]: Starting Journal Service... [ 8.257813] systemd[1]: Starting Set the console keyboard layout... [ 8.266003] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.269489] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.275719] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.283511] systemd[1]: Started Nameserver information manager. [ 8.291019] systemd[1]: Reached target Network (Pre). [ 8.298318] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.300300] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.306632] systemd[1]: Starting Load Kernel Modules... [ 8.314891] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.322778] systemd[1]: Starting udev Coldplug all Devices... [ 8.333917] systemd[1]: Mounted Huge Pages File System. [ 8.337912] systemd[1]: Mounted POSIX Message Queue File System. [ 8.341552] systemd[1]: Mounted RPC Pipe File System. [ 8.345255] systemd[1]: Mounted Kernel Debug File System. [ 8.346136] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.348442] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.348903] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.348909] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.348919] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.348924] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.349591] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.351097] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.373173] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.376221] systemd[1]: Mounted Kernel Trace File System. [ 8.380578] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.402368] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.407346] systemd[1]: nvfb-udev.service: Succeeded. [ 8.411234] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.421324] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.426279] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.429593] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.443913] systemd[1]: Starting Load/Save Random Seed... [ 8.452303] systemd[1]: Starting Create System Users... [ 8.495960] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.495960] [ 8.509736] systemd[1]: Finished Load/Save Random Seed. [ 8.521124] systemd[1]: Finished Create System Users. [ 8.527750] systemd[1]: Finished Set the console keyboard layout. [ 8.536873] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.543422] systemd[1]: Finished Load Kernel Modules. [ 8.550376] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.557501] systemd[1]: Mounting Kernel Configuration File System... [ 8.565500] systemd[1]: Started OP-TEE Client Supplicant. [ 8.574818] systemd[1]: Starting Apply Kernel Variables... [ 8.582748] systemd[1]: Mounted Kernel Configuration File System. [ 8.597328] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.601168] systemd[1]: Reached target Local File Systems (Pre). [ 8.604295] systemd[1]: Reached target Local File Systems. [ 9.951226] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.957890] imx219 9-0010: board setup failed [ 9.957976] imx219: probe of 9-0010 failed with error -121 [ 9.969316] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.975900] imx219 10-0010: board setup failed [ 9.982990] imx219: probe of 10-0010 failed with error -121 [ 9.984151] hot-surface-alert cooling state: 0 -> 1 [ 10.730120] using random self ethernet address [ 10.750339] using random host ethernet address [ 11.513611] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.513621] Creating 1 MTD partitions on "spi6.0": [ 11.513633] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.357985] using random self ethernet address [ 12.364140] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.799140] nvidia: loading out-of-tree module taints kernel. [ 58.980813] watchdog: watchdog0: watchdog did not stop! [ 59.451726] Trying to unregister non-registered hwtime source [ 62.513249] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.514707] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.045] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.086] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.107] I> Temperature = 68000 [0000.110] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.201] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.928] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.939] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.961] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.325] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.211] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.263] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.321] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.330] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.379] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.388] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.417] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.427] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.473] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.606] I> regulator 'vdd-hdmi-5v0' already enabled [0003.606] I> hdmi cable connected [0003.611] W> set volts not configured for 'vdd-1v0' [0003.615] W> set volts not configured for 'vdd-1v8-hs' [0003.616] I> retrieved tmds range from prod_list_hdmi_soc [0003.622] E> invalid display type [0003.623] E> cannot find any other nvdisp nodes [0003.639] I> edid read success [0003.652] I> edid read success [0003.652] I> width = 640, height = 480, frequency = 25174825 [0003.652] I> width = 1920, height = 1080, frequency = 148500000 [0003.653] I> width = 1280, height = 768, frequency = 79500000 [0003.653] I> width = 1360, height = 768, frequency = 85500000 [0003.654] I> width = 720, height = 480, frequency = 26973026 [0003.658] I> width = 720, height = 576, frequency = 26973026 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.686] I> width = 720, height = 480, frequency = 26973026 [0003.691] I> width = 720, height = 576, frequency = 26973026 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 4096, height = 2160, frequency = 296703296 [0003.726] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.737] I> hdmi_enable, starting HDMI initialisation [0003.742] I> hdmi_enable, HDMI initialisation complete [0003.751] initializing target [0003.752] calling apps_init() [0003.753] starting app kernel_boot_app [0003.754] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000661] Console: colour dummy device 80x25 [ 0.002005] printk: console [tty0] enabled [ 0.002067] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002102] pid_max: default: 32768 minimum: 301 [ 0.002271] LSM: Security Framework initializing [ 0.002329] Yama: becoming mindful. [ 0.002371] SELinux: Initializing. [ 0.002516] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002553] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005638] rcu: Hierarchical SRCU implementation. [ 0.005884] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006743] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006793] DTB Build time: Aug 10 2022 20:31:49 [ 0.009672] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009911] Remapping and enabling EFI services. [ 0.011860] smp: Bringing up secondary CPUs ... [ 0.044754] Detected PIPT I-cache on CPU1 [ 0.044852] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074621] Detected PIPT I-cache on CPU2 [ 0.074772] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104323] Detected PIPT I-cache on CPU3 [ 0.104413] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134100] Detected PIPT I-cache on CPU4 [ 0.134268] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163837] Detected PIPT I-cache on CPU5 [ 0.163990] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164303] smp: Brought up 1 node, 6 CPUs [ 0.164556] SMP: Total of 6 processors activated. [ 0.164624] CPU features: detected: Privileged Access Never [ 0.164657] CPU features: detected: LSE atomic instructions [ 0.164677] CPU features: detected: User Access Override [ 0.164707] CPU features: detected: 32-bit EL0 Support [ 0.164726] CPU features: detected: RAS Extension Support [ 0.164760] CPU features: detected: CRC32 instructions [ 0.164796] CPU features: detected: 32-bit EL1 Support [ 0.237930] CPU: All CPU(s) started at EL2 [ 0.244184] devtmpfs: initialized [ 0.293033] Registered cp15_barrier emulation handler [ 0.293153] Registered setend emulation handler [ 0.293175] KASLR enabled [ 0.293456] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.293481] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.294860] pinctrl core: initialized pinctrl subsystem [ 0.295865] SMBIOS 3.0.0 present. [ 0.295894] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.296506] NET: Registered protocol family 16 [ 0.298660] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.299161] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.299865] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.299923] audit: initializing netlink subsys (disabled) [ 0.300219] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.300688] thermal_sys: Registered thermal governor 'step_wise' [ 0.300695] thermal_sys: Registered thermal governor 'power_allocator' [ 0.300713] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.303167] cpuidle: using governor menu [ 0.303639] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.304072] ASID allocator initialised with 32768 entries [ 0.304308] Serial: AMBA PL011 UART driver [ 0.307482] Tegra reboot handler registered. [ 0.379684] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.379828] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.380029] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.380079] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.380200] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.380246] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.380377] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.380439] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.380579] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.380625] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.382883] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.382921] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.382951] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.382990] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.383024] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.383051] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.383076] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.383101] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.383126] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.383157] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.383184] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.383209] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.383251] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.383276] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.383320] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.383346] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.383371] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.383462] mc-err: mcerr ops are set to t19x [ 0.396079] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.396101] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.396114] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.396126] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.404799] ACPI: Interpreter disabled. [ 0.406604] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.408409] iommu: Default domain type: Translated [ 0.408513] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.409022] SCSI subsystem initialized [ 0.409329] usbcore: registered new interface driver usbfs [ 0.409416] usbcore: registered new interface driver hub [ 0.409472] usbcore: registered new device driver usb [ 0.410146] mc: Linux media interface: v0.10 [ 0.410198] videodev: Linux video capture interface: v2.00 [ 0.410675] pps_core: LinuxPPS API ver. 1 registered [ 0.410694] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.410726] PTP clock support registered [ 0.411028] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.411438] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.411560] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.412334] Registered efivars operations [ 0.420791] FPGA manager framework [ 0.420960] Advanced Linux Sound Architecture Driver Initialized. [ 0.421830] Bluetooth: Core ver 2.22 [ 0.421890] NET: Registered protocol family 31 [ 0.421911] Bluetooth: HCI device and connection manager initialized [ 0.421933] Bluetooth: HCI socket layer initialized [ 0.421952] Bluetooth: L2CAP socket layer initialized [ 0.421982] Bluetooth: SCO socket layer initialized [ 0.423897] camchar: rtcpu character device driver loaded [ 0.424781] clocksource: Switched to clocksource arch_sys_counter [ 0.853594] VFS: Disk quotas dquot_6.6.0 [ 0.853722] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.854126] pnp: PnP ACPI: disabled [ 0.867783] la/ptsa driver initialized. [ 0.867956] NET: Registered protocol family 2 [ 0.868183] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.876099] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.876257] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.876641] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.877311] TCP: Hash tables configured (established 65536 bind 65536) [ 0.877473] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.877602] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.877918] NET: Registered protocol family 1 [ 0.878958] RPC: Registered named UNIX socket transport module. [ 0.878986] RPC: Registered udp transport module. [ 0.879001] RPC: Registered tcp transport module. [ 0.879015] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.879040] PCI: CLS 0 bytes, default 64 [ 0.879334] Trying to unpack rootfs image as initramfs... [ 1.144170] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.147272] Freeing initrd memory: 8196K [ 1.151469] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.151506] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.151547] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.151853] kvm [1]: IPA Size Limit: 40 bits [ 1.152422] kvm [1]: vgic interrupt IRQ9 [ 1.152996] kvm [1]: VHE mode initialized successfully [ 1.154377] Initialise system trusted keyrings [ 1.154665] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.160536] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.161366] NFS: Registering the id_resolver key type [ 1.161396] Key type id_resolver registered [ 1.161436] Key type id_legacy registered [ 1.161527] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.161552] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.161592] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.171245] NET: Registered protocol family 38 [ 1.171268] Key type asymmetric registered [ 1.171283] Asymmetric key parser 'x509' registered [ 1.171332] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.171532] io scheduler mq-deadline registered [ 1.171550] io scheduler kyber registered [ 1.177049] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.180189] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.180275] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.180383] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.180489] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.180562] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.186026] scrncapt: init (heads:4 wins:6 planes:4) [ 1.186165] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.187127] EINJ: ACPI disabled. [ 1.190543] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.190568] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.190583] tegra-pmc: ### PMC reset level: L1 [ 1.190597] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.190668] tegra-pmc: PMC Prod config success [ 1.195582] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.201235] random: fast init done [ 1.201554] printk: console [ttyTCU0] enabled [ 2.752958] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.757458] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.762097] arm-smmu 10000000.iommu: stage 1 translation [ 2.767559] arm-smmu 10000000.iommu: stage 2 translation [ 2.773279] arm-smmu 10000000.iommu: nested translation [ 2.778406] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.785554] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.795834] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.798922] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.805221] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.813533] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.818515] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.823283] arm-smmu 12000000.iommu: stage 1 translation [ 2.828492] arm-smmu 12000000.iommu: stage 2 translation [ 2.834185] arm-smmu 12000000.iommu: nested translation [ 2.839629] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.846790] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.856763] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.859882] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.866465] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.873689] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.883655] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.886874] tegra_profiler: auth: init [ 2.890899] THERMAL EST: found 3 subdevs [ 2.894304] THERMAL EST num_resources: 0 [ 2.898427] [THERMAL EST subdev 0] [ 2.901469] [THERMAL EST subdev 1] [ 2.905161] [THERMAL EST subdev 2] [ 2.908110] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.914833] THERMAL EST: thz register success. [ 2.919088] THERMAL EST: end of probe, return err: 0 [ 2.924123] nvsciipc: loaded module [ 2.931266] tun: Universal TUN/TAP device driver, 1.6 [ 2.934054] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.939898] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.945710] e1000e: Intel(R) PRO/1000 Network Driver [ 2.950638] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.956463] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.962014] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.967930] PPP generic driver version 2.4.2 [ 2.972201] PPP BSD Compression module registered [ 2.976760] PPP Deflate Compression module registered [ 2.982239] PPP MPPE Compression module registered [ 2.986991] usbcore: registered new interface driver r8152 [ 2.992756] usbcore: registered new interface driver asix [ 2.997838] usbcore: registered new interface driver ax88179_178a [ 3.003956] usbcore: registered new interface driver cdc_ether [ 3.010170] usbcore: registered new interface driver net1080 [ 3.015768] usbcore: registered new interface driver cdc_subset [ 3.021801] usbcore: registered new interface driver zaurus [ 3.027503] usbcore: registered new interface driver cdc_ncm [ 3.033176] usbcore: registered new interface driver aqc111 [ 3.038841] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.044640] ohci-pci: OHCI PCI platform driver [ 3.049200] ohci-platform: OHCI generic platform driver [ 3.055129] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.061117] usbcore: registered new interface driver uas [ 3.065229] usbcore: registered new interface driver usb-storage [ 3.071660] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.077452] mousedev: PS/2 mouse device common for all mice [ 3.082640] usbcore: registered new interface driver xpad [ 3.090639] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.093411] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.100919] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.107491] i2c /dev entries driver [ 3.110848] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.116551] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.122068] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.127772] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.132719] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.138187] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.143562] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.157956] device-mapper: uevent: version 1.0.3 [ 3.158411] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.164451] cpuidle: Initializing cpuidle driver [ 3.168101] sdhci: Secure Digital Host Controller Interface driver [ 3.172731] sdhci: Copyright(c) Pierre Ossman [ 3.177088] Synopsys Designware Multimedia Card Interface Driver [ 3.183035] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.189086] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.189978] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.202253] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.225318] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.235169] vdd-1v0: supplied by regulator-dummy [ 3.240670] vdd-1v8-hs: supplied by regulator-dummy [ 3.245665] vdd-1v8-ls: supplied by regulator-dummy [ 3.250522] vdd-1v8-ao: supplied by regulator-dummy [ 3.254484] vddio-ddr-1v1: supplied by regulator-dummy [ 3.258937] vdd-rtc: supplied by regulator-dummy [ 3.260737] spmic-ldo1: supplied by regulator-dummy [ 3.261994] vdd-ao-3v3: supplied by regulator-dummy [ 3.268264] vddio-emmc-3v3: supplied by regulator-dummy [ 3.274642] spmic-ldo4: supplied by regulator-dummy [ 3.275879] vdd-usb-3v3: supplied by regulator-dummy [ 3.282081] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.288236] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.293881] spmic-ldo8: supplied by vdd-1v8-ls [ 3.295403] gpio-510 (gpio_default): hogged as output/high [ 3.296823] gpio-511 (gpio_default): hogged as output/high [ 3.299726] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.435489] max77686-rtc max77620-rtc: registered as rtc0 [ 3.436593] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.436988] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.268466] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.269732] hid: raw HID events driver (C) Jiri Kosina [ 4.270537] usbcore: registered new interface driver usbhid [ 4.270680] usbhid: USB HID core driver [ 4.273023] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.274384] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.048572] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.122506] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.743 ms) ÿá[ 4.358229] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.358769] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.359830] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.360572] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.362356] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.363138] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.363680] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.365557] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.365784] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.368657] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.375420] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.381496] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.386556] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.392294] denver_knobs_init:MTS_VERSION:55637613 [ 4.405273] t19x_cache tegra-cache: probed [ 4.408111] optee: probing for conduit method. [ 4.409093] optee: revision 3.16 (65cc2218) [ 4.410037] optee: dynamic shared memory is enabled [ 4.413337] optee: initialized driver [ 4.421403] nvpmodel: initialized successfully [ 4.421954] tegra_hv: get_hvd: not initialized yet [ 4.425811] user_ivc_mempool: hypervisor not present [ 4.431377] usbcore: registered new interface driver snd-usb-audio [ 4.437885] u32 classifier [ 4.439252] input device check on [ 4.443121] Actions configured [ 4.446961] Initializing XFRM netlink socket [ 4.451799] NET: Registered protocol family 10 [ 4.458139] Segment Routing with IPv6 [ 4.458851] NET: Registered protocol family 17 [ 4.463386] NET: Registered protocol family 15 [ 4.467548] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.481169] Bluetooth: RFCOMM socket layer initialized [ 4.485799] Bluetooth: RFCOMM ver 1.11 [ 4.489988] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.495549] Bluetooth: HIDP socket layer initialized [ 4.501455] 9pnet: Installing 9P2000 support [ 4.505018] Key type dns_resolver registered [ 4.510675] registered taskstats version 1 [ 4.513431] Loading compiled-in X.509 certificates [ 4.527472] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.529421] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.540362] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.541704] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.549954] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.558604] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.672905] tegra194-pcie 14160000.pcie: Link up [ 4.675788] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.676015] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.676196] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.676434] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.676633] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.677078] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.677548] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.690808] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.691368] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.691817] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.693395] pci 0004:01:00.0: supports D1 D2 [ 4.693551] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.702391] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.702753] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.703105] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.703542] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.703828] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.704021] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.707807] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.715099] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.723363] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.733599] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.738580] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.744210] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.750777] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.759717] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.761654] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.769803] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.778516] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.893802] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.894419] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.894777] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.895010] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.895397] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.895642] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.896278] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.896760] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.917573] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.917919] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.919865] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.921195] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.922541] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.924163] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.925263] pci 0005:00:00.0: Removing from iommu group 7 [ 5.925652] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.960955] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.986517] host1x 13e10000.host1x: initialized [ 5.988130] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.989157] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.990407] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.991101] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.992382] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.993129] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.994390] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.994941] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.995996] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.996729] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.004040] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.011004] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.021180] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.027961] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.038003] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.044704] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.054613] falcon 15340000.vic: Adding to iommu group 17 [ 6.069978] falcon 15340000.vic: initialized [ 6.070936] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.077197] falcon 15380000.nvjpg: initialized [ 6.077688] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.087602] falcon 154c0000.nvenc: initialized [ 6.088141] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.097935] falcon 15a80000.nvenc1: initialized [ 6.098549] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.110768] nvdec 15480000.nvdec: initialized [ 6.111389] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.121570] nvdec 15140000.nvdec1: initialized [ 6.122142] tsec 15500000.tsec: Adding to iommu group 18 [ 6.128230] tsec 15500000.tsec: initialized [ 6.128695] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.134979] tsec 15100000.tsecb: initialized [ 6.138852] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.168837] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.182182] gpio-374 (wifi-enable): hogged as output/high [ 6.182539] gpio-431 (camera-control-output-low): hogged as output/low [ 6.182995] gpio-432 (camera-control-output-low): hogged as output/low [ 6.184919] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.187107] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.187664] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.189199] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.191326] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.197077] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.202618] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.210780] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.218277] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.230081] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.234870] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.240816] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.249929] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.258853] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.266152] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.273691] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.280192] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.289621] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.295839] pva 16000000.pva0: Adding to iommu group 22 [ 6.323539] pva 16000000.pva0: initialized [ 6.327995] pva 16800000.pva1: Adding to iommu group 23 [ 6.339897] pva 16800000.pva1: initialized [ 6.344193] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.357754] nvdla 15880000.nvdla0: initialized [ 6.359247] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.375894] nvdla 158c0000.nvdla1: initialized [ 6.378192] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.378537] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.378908] tegradccommon 15200000.display-hub: dma mapping done [ 6.381397] tegradc 15200000.display: Adding to iommu group 26 [ 6.390727] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.391178] generic_infoframe_type: 0x87 [ 6.391530] tegradc 15200000.display: DT parsed successfully [ 6.391890] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.393813] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.394179] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.395823] tegradc 15210000.display: Adding to iommu group 26 [ 6.403890] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.406614] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.410065] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.417918] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.417943] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.423982] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.433362] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.439923] tegra_cec 3960000.tegra_cec: probed [ 6.440737] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.445565] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.446891] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.458249] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.465202] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.468693] kfuse 3830000.kfuse: initialized [ 6.480451] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.486696] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.494690] tegradc 15210000.display: disp0 connected to head1->sor [ 6.497419] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.504428] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.511852] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.517218] tegradc 15210000.display: DT parsed successfully [ 6.524678] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.530962] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.553317] random: crng init done [ 6.561065] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.568969] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.578198] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.583735] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.604013] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.604513] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.607319] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.615490] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.623905] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.630604] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.638100] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.645238] usb usb1: Product: xHCI Host Controller [ 6.650466] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.656764] usb usb1: SerialNumber: 3610000.xhci [ 6.662767] hub 1-0:1.0: USB hub found [ 6.665116] hub 1-0:1.0: 4 ports detected [ 6.669831] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.674465] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.682334] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.690133] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.697934] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.704949] usb usb2: Product: xHCI Host Controller [ 6.710140] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.716379] usb usb2: SerialNumber: 3610000.xhci [ 6.721819] hub 2-0:1.0: USB hub found [ 6.724851] hub 2-0:1.0: 4 ports detected [ 6.767555] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.774584] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.776344] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.776607] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.790506] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.791548] tegra194-cpufreq ccplex: probed with BWMGR [ 6.793042] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.793604] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.794091] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.795328] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.802377] tegra194-vi5 15c10000.vi: initialized [ 6.803919] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.805007] generic_infoframe_type: 0x87 [ 6.805173] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.808958] tegradc 15200000.display: DT parsed successfully [ 6.815371] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.820713] tegradc 15200000.display: Display dc.000000000a6099bc registered with id=0 [ 6.828888] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.828896] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.828905] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.836738] mmc0: CQHCI version 5.10 [ 6.837608] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.837613] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.837616] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.837964] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.837969] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.838129] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.839224] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.839228] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.841332] tegradc 15200000.display: probed [ 6.843333] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.849021] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.879668] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.884596] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.932837] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.933865] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.969017] Console: switching to colour frame buffer device 240x67 [ 6.970867] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.974555] tegradc 15200000.display: fb registered [ 6.974657] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.978004] mmc0: Command Queue Engine enabled [ 6.978008] mmc0: periodic cache flush enabled [ 6.978025] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.978569] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.978728] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.982683] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.988381] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.988595] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.040115] nvethernet 2490000.ethernet: Macsec not supported [ 7.047252] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 7.047695] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.054729] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 7.063558] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.068299] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 7.076169] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.083178] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.091899] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.099050] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.105132] Extcon AUX1(HDMI) enable [ 7.113259] tegra-se-nvhost 15810000.se: initialized [ 7.115478] tegradc 15210000.display: disp1 connected to head1->sor [ 7.126805] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.133575] tegradc 15210000.display: DT parsed successfully [ 7.134240] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.139274] tegradc 15210000.display: Display dc.000000000bc10365 registered with id=1 [ 7.146404] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.153927] tegradc 15210000.display: vblank syncpt # 14 for dc 1 [ 7.165972] tegradc 15210000.display: vpulse3 syncpt # 15 for dc 1 [ 7.172616] tegra-se-nvhost 15820000.se: initialized [ 7.173969] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.178978] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.179325] tegradc 15210000.display: probed [ 7.185537] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.192000] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.196031] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.196040] usb 1-2: Manufacturer: Generic [ 7.204336] tegra-se-nvhost 15830000.se: initialized [ 7.211746] hub 1-2:1.0: USB hub found [ 7.215165] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.219735] hub 1-2:1.0: 4 ports detected [ 7.223574] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.243490] tegradc 15210000.display: fb registered [ 7.244154] tegra-se-nvhost 15840000.se: initialized [ 7.251812] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.255127] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.260415] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.260426] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.279862] tegradc 15200000.display: blank - powerdown [ 7.281333] tegra_actmon d230000.actmon: in actmon_register()... [ 7.281501] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.281688] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.281907] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.282393] hvc_sysfs: hypervisor is not present [ 7.309214] ALSA device list: [ 7.309220] No soundcards found. [ 7.314755] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.314778] Extcon AUX1(HDMI) disable [ 7.318947] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.318954] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.318958] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.318962] usb 2-3: Manufacturer: Generic [ 7.329715] hub 2-3:1.0: USB hub found [ 7.331588] hub 2-3:1.0: 4 ports detected [ 7.338236] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.339107] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.350307] tegradc 15200000.display: unblank [ 7.351410] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.351604] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.358374] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.360301] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.364343] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.364347] Extcon AUX1(HDMI) enable [ 7.377076] tegradc 15200000.display: sync windows ret = 246 [ 7.435410] tegradc 15210000.display: blank - powerdown [ 7.436806] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.440471] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.455600] Extcon DP: HPD disabled [ 7.455605] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.455617] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.455622] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.458989] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.485211] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.486224] Freeing unused kernel memory: 3968K [ 7.492158] Extcon HDMI: HPD enabled [ 7.492164] tegradc 15200000.display: hdmi: plugged [ 7.505543] Run /init as init process [ 7.523557] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.524980] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.564574] Root device found: mmcblk0p1 [ 7.567980] Found dev node: /dev/mmcblk0p1 [ 7.598049] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.599442] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.600740] usb 1-3: Product: Bluetooth Radio [ 7.601976] usb 1-3: Manufacturer: Realtek [ 7.603190] usb 1-3: SerialNumber: 00e04c000001 [ 7.604235] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.609969] Rootfs mounted over mmcblk0p1 [ 7.641922] Switching from initrd to actual rootfs [ 7.801663] systemd[1]: System time before build time, advancing clock. [ 7.875985] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.880956] systemd[1]: Detected architecture arm64. [ 7.935924] systemd[1]: Set hostname to . [ 8.101878] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.450259] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.451880] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.457331] systemd[1]: Created slice system-modprobe.slice. [ 8.461956] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.465890] systemd[1]: Created slice User and Session Slice. [ 8.469217] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.473180] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.476343] systemd[1]: Reached target User and Group Name Lookups. [ 8.479417] systemd[1]: Reached target Slices. [ 8.482331] systemd[1]: Reached target Swap. [ 8.486139] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.491123] systemd[1]: Listening on Syslog Socket. [ 8.496063] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.499401] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.503595] systemd[1]: Listening on Journal Audit Socket. [ 8.507099] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.510776] systemd[1]: Listening on Journal Socket. [ 8.514342] systemd[1]: Listening on udev Control Socket. [ 8.517765] systemd[1]: Listening on udev Kernel Socket. [ 8.525819] systemd[1]: Mounting Huge Pages File System... [ 8.533968] systemd[1]: Mounting POSIX Message Queue File System... [ 8.541890] systemd[1]: Mounting RPC Pipe File System... [ 8.550283] systemd[1]: Mounting Kernel Debug File System... [ 8.558718] systemd[1]: Mounting Kernel Trace File System... [ 8.568628] systemd[1]: Starting Journal Service... [ 8.577553] systemd[1]: Starting Set the console keyboard layout... [ 8.585900] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.589361] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.595855] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.603756] systemd[1]: Started Nameserver information manager. [ 8.608294] systemd[1]: Reached target Network (Pre). [ 8.615321] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.617337] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.624176] systemd[1]: Starting Load Kernel Modules... [ 8.632266] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.641179] systemd[1]: Starting udev Coldplug all Devices... [ 8.650899] systemd[1]: Mounted Huge Pages File System. [ 8.654521] systemd[1]: Mounted POSIX Message Queue File System. [ 8.658458] systemd[1]: Mounted RPC Pipe File System. [ 8.661905] systemd[1]: Mounted Kernel Debug File System. [ 8.663278] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.668890] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.671186] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.671620] systemd[1]: Mounted Kernel Trace File System. [ 8.672682] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.672697] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.676824] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.677094] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.677326] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.677488] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.677495] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.698124] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.703939] systemd[1]: nvfb-udev.service: Succeeded. [ 8.708722] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.721816] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.727054] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.728764] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.743411] systemd[1]: Starting Load/Save Random Seed... [ 8.751726] systemd[1]: Starting Create System Users... [ 8.797671] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.797671] [ 8.807133] systemd[1]: Finished Load/Save Random Seed. [ 8.813616] systemd[1]: Finished Create System Users. [ 8.821801] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.828563] systemd[1]: Finished Set the console keyboard layout. [ 8.835633] systemd[1]: Finished Load Kernel Modules. [ 8.840708] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.847548] systemd[1]: Mounting Kernel Configuration File System... [ 8.857298] systemd[1]: Started OP-TEE Client Supplicant. [ 8.865425] systemd[1]: Starting Apply Kernel Variables... [ 8.875184] systemd[1]: Mounted Kernel Configuration File System. [ 8.883548] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.887507] systemd[1]: Reached target Local File Systems (Pre). [ 8.890604] systemd[1]: Reached target Local File Systems. [ 8.893738] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 10.309458] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.319816] imx219 9-0010: board setup failed [ 10.321224] imx219: probe of 9-0010 failed with error -121 [ 10.337350] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.346161] imx219 10-0010: board setup failed [ 10.346285] imx219: probe of 10-0010 failed with error -121 [ 10.377167] hot-surface-alert cooling state: 0 -> 1 [ 11.152452] using random self ethernet address [ 11.184409] using random host ethernet address [ 11.826546] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.828206] Creating 1 MTD partitions on "spi6.0": [ 11.830292] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.484704] using random self ethernet address [ 12.486387] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.801323] nvidia: loading out-of-tree module taints kernel. [ 59.514960] watchdog: watchdog0: watchdog did not stop! [ 59.982534] Trying to unregister non-registered hwtime source [ 63.044126] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.046204] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.358] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized ÿä:ÿâpm_post initialized dbells initialized ÿä23:ÿâdmce initialized cvc initialized ÿä20 UTC 2022 aÿâavfs_clk_mach_post initialized ÿäarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuratioÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿän might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.636] I> edid read success [0003.648] I> edid read success [0003.649] I> width = 640, height = 480, frequency = 25174825 [0003.649] I> width = 1920, height = 1080, frequency = 148500000 [0003.650] I> width = 1280, height = 768, frequency = 79500000 [0003.650] I> width = 1360, height = 768, frequency = 85500000 [0003.650] I> width = 720, height = 480, frequency = 26973026 [0003.654] I> width = 720, height = 576, frequency = 26973026 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 720, height = 480, frequency = 26973026 [0003.688] I> width = 720, height = 576, frequency = 26973026 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.734] I> hdmi_enable, starting HDMI initialisation [0003.739] I> hdmi_enable, HDMI initialisation complete [0003.748] initializing target [0003.749] calling apps_init() [0003.750] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000677] Console: colour dummy device 80x25 [ 0.002121] printk: console [tty0] enabled [ 0.002184] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002219] pid_max: default: 32768 minimum: 301 [ 0.002487] LSM: Security Framework initializing [ 0.002558] Yama: becoming mindful. [ 0.002612] SELinux: Initializing. [ 0.002823] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002879] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005849] rcu: Hierarchical SRCU implementation. [ 0.006088] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006802] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006880] DTB Build time: Aug 10 2022 20:31:49 [ 0.009658] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009902] Remapping and enabling EFI services. [ 0.011779] smp: Bringing up secondary CPUs ... [ 0.040977] Detected PIPT I-cache on CPU1 [ 0.041078] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.076431] Detected PIPT I-cache on CPU2 [ 0.076529] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.106187] Detected PIPT I-cache on CPU3 [ 0.106328] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.136024] Detected PIPT I-cache on CPU4 [ 0.136189] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165999] Detected PIPT I-cache on CPU5 [ 0.166197] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166579] smp: Brought up 1 node, 6 CPUs [ 0.166909] SMP: Total of 6 processors activated. [ 0.166933] CPU features: detected: Privileged Access Never [ 0.166955] CPU features: detected: LSE atomic instructions [ 0.166976] CPU features: detected: User Access Override [ 0.166998] CPU features: detected: 32-bit EL0 Support [ 0.167019] CPU features: detected: RAS Extension Support [ 0.167040] CPU features: detected: CRC32 instructions [ 0.167062] CPU features: detected: 32-bit EL1 Support [ 0.237425] CPU: All CPU(s) started at EL2 [ 0.244494] devtmpfs: initialized [ 0.290877] Registered cp15_barrier emulation handler [ 0.291004] Registered setend emulation handler [ 0.291029] KASLR enabled [ 0.291291] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291326] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292650] pinctrl core: initialized pinctrl subsystem [ 0.293584] SMBIOS 3.0.0 present. [ 0.293617] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294257] NET: Registered protocol family 16 [ 0.296060] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296567] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297286] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297340] audit: initializing netlink subsys (disabled) [ 0.297630] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.298056] thermal_sys: Registered thermal governor 'step_wise' [ 0.298063] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298078] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300233] cpuidle: using governor menu [ 0.300548] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300961] ASID allocator initialised with 32768 entries [ 0.301156] Serial: AMBA PL011 UART driver [ 0.304143] Tegra reboot handler registered. [ 0.374805] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375010] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.375242] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.375319] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.375457] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.375501] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.375637] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.375680] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.375796] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.375838] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.378185] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.378236] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.378265] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.378291] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.378320] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.378368] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.378404] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.378434] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.378458] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.378480] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.378503] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.378526] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.378551] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.378575] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.378597] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.378620] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.378643] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.378726] mc-err: mcerr ops are set to t19x [ 0.391085] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391109] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.391121] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391131] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397493] ACPI: Interpreter disabled. [ 0.398588] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.399760] iommu: Default domain type: Translated [ 0.399834] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400195] SCSI subsystem initialized [ 0.400349] usbcore: registered new interface driver usbfs [ 0.400389] usbcore: registered new interface driver hub [ 0.400423] usbcore: registered new device driver usb [ 0.400854] mc: Linux media interface: v0.10 [ 0.400893] videodev: Linux video capture interface: v2.00 [ 0.401254] pps_core: LinuxPPS API ver. 1 registered [ 0.401266] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401289] PTP clock support registered [ 0.401514] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.401803] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401887] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.402582] Registered efivars operations [ 0.408231] FPGA manager framework [ 0.408370] Advanced Linux Sound Architecture Driver Initialized. [ 0.408982] Bluetooth: Core ver 2.22 [ 0.409019] NET: Registered protocol family 31 [ 0.409030] Bluetooth: HCI device and connection manager initialized [ 0.409044] Bluetooth: HCI socket layer initialized [ 0.409059] Bluetooth: L2CAP socket layer initialized [ 0.409079] Bluetooth: SCO socket layer initialized [ 0.410605] camchar: rtcpu character device driver loaded [ 0.411323] clocksource: Switched to clocksource arch_sys_counter [ 0.700598] VFS: Disk quotas dquot_6.6.0 [ 0.700713] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.701047] pnp: PnP ACPI: disabled [ 0.713549] la/ptsa driver initialized. [ 0.713722] NET: Registered protocol family 2 [ 0.713928] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.719387] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.719496] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.719750] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.720190] TCP: Hash tables configured (established 65536 bind 65536) [ 0.720343] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.720434] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.720620] NET: Registered protocol family 1 [ 0.721453] RPC: Registered named UNIX socket transport module. [ 0.721485] RPC: Registered udp transport module. [ 0.721501] RPC: Registered tcp transport module. [ 0.721515] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.721538] PCI: CLS 0 bytes, default 64 [ 0.721815] Trying to unpack rootfs image as initramfs... [ 0.925689] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.927901] Freeing initrd memory: 8196K [ 0.932152] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.932188] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.932236] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.932948] kvm [1]: IPA Size Limit: 40 bits [ 0.933554] kvm [1]: vgic interrupt IRQ9 [ 0.934069] kvm [1]: VHE mode initialized successfully [ 0.935469] Initialise system trusted keyrings [ 0.935733] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.942215] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.942958] NFS: Registering the id_resolver key type [ 0.942985] Key type id_resolver registered [ 0.942997] Key type id_legacy registered [ 0.943073] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.943091] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.943116] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.953777] NET: Registered protocol family 38 [ 0.953797] Key type asymmetric registered [ 0.953809] Asymmetric key parser 'x509' registered [ 0.953850] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.954049] io scheduler mq-deadline registered [ 0.954062] io scheduler kyber registered [ 0.958940] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.961230] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.961291] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.961370] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.961441] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.961491] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.965894] scrncapt: init (heads:4 wins:6 planes:4) [ 0.966169] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.966835] EINJ: ACPI disabled. [ 0.969312] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.969334] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.969345] tegra-pmc: ### PMC reset level: L1 [ 0.969354] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.969398] tegra-pmc: PMC Prod config success [ 0.973759] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.978048] random: fast init done [ 0.978284] printk: console [ttyTCU0] enabled [ 2.530740] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.535290] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.539771] arm-smmu 10000000.iommu: stage 1 translation [ 2.545269] arm-smmu 10000000.iommu: stage 2 translation [ 2.551039] arm-smmu 10000000.iommu: nested translation [ 2.556405] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.563563] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.574123] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.576715] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.582986] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.590602] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.596046] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.600751] arm-smmu 12000000.iommu: stage 1 translation [ 2.606259] arm-smmu 12000000.iommu: stage 2 translation [ 2.611954] arm-smmu 12000000.iommu: nested translation [ 2.617383] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.624540] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.634952] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.637438] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.643992] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.651397] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.661887] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.664450] tegra_profiler: auth: init [ 2.668669] THERMAL EST: found 3 subdevs [ 2.672075] THERMAL EST num_resources: 0 [ 2.676177] [THERMAL EST subdev 0] [ 2.679494] [THERMAL EST subdev 1] [ 2.682629] [THERMAL EST subdev 2] [ 2.686156] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.692592] THERMAL EST: thz register success. [ 2.696591] THERMAL EST: end of probe, return err: 0 [ 2.702140] nvsciipc: loaded module [ 2.708768] tun: Universal TUN/TAP device driver, 1.6 [ 2.711438] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.717657] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.723481] e1000e: Intel(R) PRO/1000 Network Driver [ 2.728144] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.734472] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.739785] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.745883] PPP generic driver version 2.4.2 [ 2.749938] PPP BSD Compression module registered [ 2.754498] PPP Deflate Compression module registered [ 2.759997] PPP MPPE Compression module registered [ 2.765006] usbcore: registered new interface driver r8152 [ 2.770270] usbcore: registered new interface driver asix [ 2.775852] usbcore: registered new interface driver ax88179_178a [ 2.781711] usbcore: registered new interface driver cdc_ether [ 2.787919] usbcore: registered new interface driver net1080 [ 2.793259] usbcore: registered new interface driver cdc_subset [ 2.799636] usbcore: registered new interface driver zaurus [ 2.805032] usbcore: registered new interface driver cdc_ncm [ 2.810696] usbcore: registered new interface driver aqc111 [ 2.816578] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.822455] ohci-pci: OHCI PCI platform driver [ 2.826955] ohci-platform: OHCI generic platform driver [ 2.832628] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.838823] usbcore: registered new interface driver uas [ 2.843255] usbcore: registered new interface driver usb-storage [ 2.849378] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.855321] mousedev: PS/2 mouse device common for all mice [ 2.860407] usbcore: registered new interface driver xpad [ 2.868067] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.870865] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.878713] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.885185] i2c /dev entries driver [ 2.888528] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.894585] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.899920] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.905341] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.910356] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.916137] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.921330] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.933954] device-mapper: uevent: version 1.0.3 [ 2.934395] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.941778] cpuidle: Initializing cpuidle driver [ 2.945765] sdhci: Secure Digital Host Controller Interface driver [ 2.950509] sdhci: Copyright(c) Pierre Ossman [ 2.954854] Synopsys Designware Multimedia Card Interface Driver [ 2.961041] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.966774] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.967362] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.979923] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.001031] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.010145] vdd-1v0: supplied by regulator-dummy [ 3.015525] vdd-1v8-hs: supplied by regulator-dummy [ 3.020276] vdd-1v8-ls: supplied by regulator-dummy [ 3.024980] vdd-1v8-ao: supplied by regulator-dummy [ 3.028921] vddio-ddr-1v1: supplied by regulator-dummy [ 3.033300] vdd-rtc: supplied by regulator-dummy [ 3.034998] spmic-ldo1: supplied by regulator-dummy [ 3.036187] vdd-ao-3v3: supplied by regulator-dummy [ 3.042308] vddio-emmc-3v3: supplied by regulator-dummy [ 3.048533] spmic-ldo4: supplied by regulator-dummy [ 3.049801] vdd-usb-3v3: supplied by regulator-dummy [ 3.055919] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.062045] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.067479] spmic-ldo8: supplied by vdd-1v8-ls [ 3.068881] gpio-510 (gpio_default): hogged as output/high [ 3.070156] gpio-511 (gpio_default): hogged as output/high [ 3.073863] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.212647] max77686-rtc max77620-rtc: registered as rtc0 [ 3.213897] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.214212] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.934041] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.935044] hid: raw HID events driver (C) Jiri Kosina [ 3.935832] usbcore: registered new interface driver usbhid [ 3.935984] usbhid: USB HID core driver [ 3.937664] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.938843] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.933875] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.009260] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.195 ms) ÿá[ 4.024087] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.024794] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.025965] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.026717] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.028648] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.029347] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.029998] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.031495] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.031864] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.033143] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.033804] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.040894] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.048121] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.061179] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.068141] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.072394] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.079432] denver_knobs_init:MTS_VERSION:55637613 [ 4.090335] t19x_cache tegra-cache: probed [ 4.092890] optee: probing for conduit method. [ 4.093665] optee: revision 3.16 (65cc2218) [ 4.094662] optee: dynamic shared memory is enabled [ 4.099328] optee: initialized driver [ 4.105543] nvpmodel: initialized successfully [ 4.106999] tegra_hv: get_hvd: not initialized yet [ 4.111773] user_ivc_mempool: hypervisor not present [ 4.118365] usbcore: registered new interface driver snd-usb-audio [ 4.124353] u32 classifier [ 4.125328] input device check on [ 4.129034] Actions configured [ 4.132947] Initializing XFRM netlink socket [ 4.137903] NET: Registered protocol family 10 [ 4.145164] Segment Routing with IPv6 [ 4.145464] NET: Registered protocol family 17 [ 4.149569] NET: Registered protocol family 15 [ 4.153897] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.167705] Bluetooth: RFCOMM socket layer initialized [ 4.171925] Bluetooth: RFCOMM ver 1.11 [ 4.175783] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.181891] Bluetooth: HIDP socket layer initialized [ 4.187635] 9pnet: Installing 9P2000 support [ 4.191331] Key type dns_resolver registered [ 4.196799] registered taskstats version 1 [ 4.199770] Loading compiled-in X.509 certificates [ 4.212824] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.215185] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.225666] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.227735] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.236002] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.244836] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.359385] tegra194-pcie 14160000.pcie: Link up [ 4.362427] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.362757] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.362994] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.363364] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.363580] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.363978] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.364481] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.377175] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.377681] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.378216] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.379893] pci 0004:01:00.0: supports D1 D2 [ 4.380102] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.391257] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.391810] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.392052] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.392565] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.392959] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.393156] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.393943] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.401671] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.410098] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.420288] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.424568] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.430443] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.437474] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.447385] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.448044] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.456371] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.465009] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.580191] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.580817] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.581053] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.581199] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.581549] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.581769] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.582194] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.582660] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.603406] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.603663] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.606150] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.607756] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.609259] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.611202] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.612444] pci 0005:00:00.0: Removing from iommu group 7 [ 5.612908] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.650807] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.676147] host1x 13e10000.host1x: initialized [ 5.677934] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.678811] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.680311] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.681056] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.682320] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.683048] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.684381] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.685089] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.686164] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.686812] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.690212] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.697165] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.707031] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.714300] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.724001] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.731391] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.741044] falcon 15340000.vic: Adding to iommu group 17 [ 5.757040] falcon 15340000.vic: initialized [ 5.758257] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.763983] falcon 15380000.nvjpg: initialized [ 5.764731] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.774890] falcon 154c0000.nvenc: initialized [ 5.775695] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.784553] falcon 15a80000.nvenc1: initialized [ 5.785192] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.798251] nvdec 15480000.nvdec: initialized [ 5.799043] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.810289] nvdec 15140000.nvdec1: initialized [ 5.810874] tsec 15500000.tsec: Adding to iommu group 18 [ 5.816992] tsec 15500000.tsec: initialized [ 5.817689] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.822984] tsec 15100000.tsecb: initialized [ 5.827396] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.854496] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.867695] gpio-374 (wifi-enable): hogged as output/high [ 5.867979] gpio-431 (camera-control-output-low): hogged as output/low [ 5.868276] gpio-432 (camera-control-output-low): hogged as output/low [ 5.870266] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.872751] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.873290] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.874848] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.877865] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.883892] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.889402] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.898075] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.904761] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.916073] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.921632] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.927488] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.936326] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.945391] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.952661] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.960218] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.966337] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.976331] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.982563] pva 16000000.pva0: Adding to iommu group 22 [ 6.010831] pva 16000000.pva0: initialized [ 6.016175] pva 16800000.pva1: Adding to iommu group 23 [ 6.028184] pva 16800000.pva1: initialized [ 6.032644] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.046080] nvdla 15880000.nvdla0: initialized [ 6.047709] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.057791] nvdla 158c0000.nvdla1: initialized [ 6.060241] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.060507] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.060919] tegradccommon 15200000.display-hub: dma mapping done [ 6.062791] tegradc 15200000.display: Adding to iommu group 26 [ 6.072223] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.072699] generic_infoframe_type: 0x87 [ 6.072955] tegradc 15200000.display: DT parsed successfully [ 6.073206] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.076732] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.077357] tegradc 15210000.display: Adding to iommu group 26 [ 6.078938] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.085411] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.093557] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.101167] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.109266] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.115884] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.121050] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.126744] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.132652] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.140217] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.144550] tegra_cec 3960000.tegra_cec: probed [ 6.157889] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.160147] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.167224] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.181785] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.182087] tegradc 15210000.display: disp0 connected to head1->sor [ 6.186575] kfuse 3830000.kfuse: initialized [ 6.192277] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.197252] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.204044] tegradc 15210000.display: DT parsed successfully [ 6.210366] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.211020] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.216058] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.237350] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.246388] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.251484] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.261334] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.266296] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.286981] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.287424] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.289301] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.298108] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.306372] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.313052] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.320562] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.327740] usb usb1: Product: xHCI Host Controller [ 6.332670] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.338968] usb usb1: SerialNumber: 3610000.xhci [ 6.344886] hub 1-0:1.0: USB hub found [ 6.347559] hub 1-0:1.0: 4 ports detected [ 6.352622] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.357181] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.364544] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.372624] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.380146] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.387474] usb usb2: Product: xHCI Host Controller [ 6.392601] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.398815] usb usb2: SerialNumber: 3610000.xhci [ 6.404527] hub 2-0:1.0: USB hub found [ 6.407003] hub 2-0:1.0: 4 ports detected [ 6.452841] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.459147] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.460881] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.461080] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.474235] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.475372] tegra194-cpufreq ccplex: probed with BWMGR [ 6.476708] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.477187] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.477647] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.479131] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.486795] tegra194-vi5 15c10000.vi: initialized [ 6.488243] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.488475] generic_infoframe_type: 0x87 [ 6.489385] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.491425] mmc0: CQHCI version 5.10 [ 6.491434] tegradc 15200000.display: DT parsed successfully [ 6.491464] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.492099] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.492103] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.492106] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.492465] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.492472] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.492625] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.493657] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.493662] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.503999] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.504003] ************************************** [ 6.504005] CPU:0, Error:cbb-noc [ 6.504008] Error Logger : 0 [ 6.504017] ErrLog0 : 0x80030000 [ 6.504020] Transaction Type : RD - Read, Incrementing [ 6.504022] Error Code : SLV [ 6.504025] Error Source : Target [ 6.504028] Error Description : Target error detected by CBB slave [ 6.504037] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.504046] Packet header Lock : 0 [ 6.504049] Packet header Len1 : 3 [ 6.504052] NOC protocol version : version >= 2.7 [ 6.504055] ErrLog1 : 0x352424 [ 6.504058] ErrLog2 : 0x0 [ 6.504060] RouteId : 0x352424 [ 6.504063] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.504066] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.504069] TargSubRange : 18 [ 6.504071] SeqId : 0 [ 6.504074] ErrLog3 : 0x4045c [ 6.504076] ErrLog4 : 0x0 [ 6.504080] Address accessed : 0x15b4045c [ 6.504083] ErrLog5 : 0x909f851 [ 6.504086] Non-Modify : 0x1 [ 6.504088] AXI ID : 0x12 [ 6.504091] Master ID : CCPLEX [ 6.504099] Security Group(GRPSEC): 0x7e [ 6.504363] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.507014] Cache : 0x1 -- Bufferable [ 6.507045] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.514691] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.523114] FALCONSEC : 0x0 [ 6.523117] Virtual Queuing Channel(VQC): 0x0 [ 6.523121] ************************************** [ 6.523152] ------------[ cut here ]------------ [ 6.531541] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.539219] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.539227] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.539232] Modules linked in: [ 6.539245] CPU: 0 PID: 103 Comm: kworker/u12:2 Not tainted 5.10.104-tegra #1 [ 6.545797] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.551819] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.551837] Workqueue: events_unbound async_run_entry_fn [ 6.551865] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.551878] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 6.562420] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.569755] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 6.569759] sp : ffff800010003b30 [ 6.569766] x29: ffff800010003b30 x28: 0000000000000001 [ 6.587335] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.589800] x27: 0000000000000005 x26: ffffbec2f6873f58 [ 6.592972] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.596875] [ 6.596879] x25: ffffbec2f71cce10 x24: 0000000000000001 [ 6.596889] x23: ffffbec2f6b67000 x22: ffffbec2f6feea00 [ 6.602152] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.605544] x21: 000000000000000f x20: ffff28bcc0ea4e80 [ 6.605554] x19: ffffbec2f6feea00 x18: 0000000000000020 [ 6.605563] x17: 0000000000006270 x16: 0000000022dcbdf9 [ 6.615310] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.615604] [ 6.615625] x15: ffff28bcc1002270 x14: ffffffffffffffff [ 6.883271] x13: ffffbec2f717ade8 x12: ffffbec2f717aa2d [ 6.888864] x11: 0720072007200720 x10: 0720072007200720 [ 6.893946] x9 : ffff800010003a40 x8 : 2a2a2a2a2a2a2a2a [ 6.899457] x7 : 2a2a2a2a2a2a2a2a x6 : 000000002ad44e5c [ 6.905051] x5 : 000000000000000c x4 : 00000000fffff29a [ 6.910389] x3 : 00000000ffffffff x2 : ffffbec2f530e090 [ 6.915486] x1 : ffff28bcc1001d00 x0 : 0000000100010100 [ 6.920806] Call trace: [ 6.923711] tegra194_cbb_err_isr+0x190/0x1b0 [ 6.927727] __handle_irq_event_percpu+0x68/0x2a0 [ 6.932545] handle_irq_event_percpu+0x40/0xa0 [ 6.936819] handle_irq_event+0x50/0xf0 [ 6.940498] handle_fasteoi_irq+0xc0/0x170 [ 6.944522] generic_handle_irq+0x40/0x60 [ 6.948547] __handle_domain_irq+0x70/0xd0 [ 6.953004] efi_header_end+0xb0/0xf0 [ 6.956245] el1_irq+0xd0/0x180 [ 6.959239] __do_softirq+0xb4/0x3e8 [ 6.963156] irq_exit+0xc0/0xe0 [ 6.966129] __handle_domain_irq+0x74/0xd0 [ 6.969898] efi_header_end+0xb0/0xf0 [ 6.973829] el1_irq+0xd0/0x180 [ 6.976807] tegra_hda_get_dev_id+0x6c/0x2b0 [ 6.980850] tegra_hda_init+0x234/0x440 [ 6.985030] tegra_dc_hdmi_init+0x820/0xb50 [ 6.988878] tegra_dc_set_out+0x2cc/0x480 [ 6.992991] tegra_dc_probe+0xa90/0x1570 [ 6.996930] platform_drv_probe+0x5c/0xb0 [ 7.000873] really_probe+0xf8/0x3d0 [ 7.004562] driver_probe_device+0x60/0xc0 [ 7.008917] __device_attach_driver+0x8c/0xd0 [ 7.013292] bus_for_each_drv+0x8c/0xe0 [ 7.017055] __device_attach_async_helper+0xc4/0xf0 [ 7.021698] async_run_entry_fn+0x4c/0x150 [ 7.025898] process_one_work+0x1c4/0x4a0 [ 7.030009] worker_thread+0x54/0x430 [ 7.033941] kthread+0x148/0x170 [ 7.037282] ret_from_fork+0x10/0x24 [ 7.040951] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.046832] ---[ end trace 0ee9269ba83602af ]--- [ 7.051445] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.059140] SMP: stopping secondary CPUs [ 7.063092] Kernel Offset: 0x3ec2e5150000 from 0xffff800010000000 [ 7.069201] PHYS_OFFSET: 0xffffd74440000000 [ 7.073057] CPU features: 0x8240002,03802a30 [ 7.077687] Memory Limit: none [ 7.080500] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.030] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.337] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.338] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.338] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.352] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.481] I> register 'maxim' power off handle [0003.483] I> virtual i2c enabled [0003.483] I> registered 'maxim,max20024' pmic [0003.484] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.614] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.631] I> edid read success [0003.644] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.644] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.683] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.744] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000681] Console: colour dummy device 80x25 [ 0.002012] printk: console [tty0] enabled [ 0.002073] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002108] pid_max: default: 32768 minimum: 301 [ 0.002295] LSM: Security Framework initializing [ 0.002352] Yama: becoming mindful. [ 0.002394] SELinux: Initializing. [ 0.002576] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002615] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005631] rcu: Hierarchical SRCU implementation. [ 0.005889] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006711] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006759] DTB Build time: Aug 10 2022 20:31:49 [ 0.009365] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009627] Remapping and enabling EFI services. [ 0.011651] smp: Bringing up secondary CPUs ... [ 0.040871] Detected PIPT I-cache on CPU1 [ 0.040971] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073098] Detected PIPT I-cache on CPU2 [ 0.073241] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102828] Detected PIPT I-cache on CPU3 [ 0.102979] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132712] Detected PIPT I-cache on CPU4 [ 0.132828] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162558] Detected PIPT I-cache on CPU5 [ 0.162662] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162977] smp: Brought up 1 node, 6 CPUs [ 0.163164] SMP: Total of 6 processors activated. [ 0.163243] CPU features: detected: Privileged Access Never [ 0.163272] CPU features: detected: LSE atomic instructions [ 0.163292] CPU features: detected: User Access Override [ 0.163322] CPU features: detected: 32-bit EL0 Support [ 0.163341] CPU features: detected: RAS Extension Support [ 0.163377] CPU features: detected: CRC32 instructions [ 0.163411] CPU features: detected: 32-bit EL1 Support [ 0.234253] CPU: All CPU(s) started at EL2 [ 0.240467] devtmpfs: initialized [ 0.288414] Registered cp15_barrier emulation handler [ 0.288538] Registered setend emulation handler [ 0.288558] KASLR enabled [ 0.288843] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288866] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290327] pinctrl core: initialized pinctrl subsystem [ 0.291298] SMBIOS 3.0.0 present. [ 0.291338] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291880] NET: Registered protocol family 16 [ 0.293939] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.294436] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295147] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295203] audit: initializing netlink subsys (disabled) [ 0.295410] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.295845] thermal_sys: Registered thermal governor 'step_wise' [ 0.295850] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295863] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298027] cpuidle: using governor menu [ 0.298370] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.298756] ASID allocator initialised with 32768 entries [ 0.298994] Serial: AMBA PL011 UART driver [ 0.302373] Tegra reboot handler registered. [ 0.373565] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.373692] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.373886] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.373953] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.374111] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.374202] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.374319] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.374365] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.374485] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.374533] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.376731] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.376766] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.376796] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.376825] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.376856] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.376884] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.376923] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.376958] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.376984] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.377009] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.377034] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.377059] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.377083] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.377128] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.377154] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.377199] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.377224] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.377337] mc-err: mcerr ops are set to t19x [ 0.389731] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.389752] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.389765] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.389776] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.396220] ACPI: Interpreter disabled. [ 0.397466] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.398810] iommu: Default domain type: Translated [ 0.398884] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.399289] SCSI subsystem initialized [ 0.399435] usbcore: registered new interface driver usbfs [ 0.399480] usbcore: registered new interface driver hub [ 0.399515] usbcore: registered new device driver usb [ 0.399857] mc: Linux media interface: v0.10 [ 0.399923] videodev: Linux video capture interface: v2.00 [ 0.400193] pps_core: LinuxPPS API ver. 1 registered [ 0.400206] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.400226] PTP clock support registered [ 0.400398] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.400734] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.400818] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.401353] Registered efivars operations [ 0.406862] FPGA manager framework [ 0.407002] Advanced Linux Sound Architecture Driver Initialized. [ 0.407641] Bluetooth: Core ver 2.22 [ 0.407681] NET: Registered protocol family 31 [ 0.407693] Bluetooth: HCI device and connection manager initialized [ 0.407709] Bluetooth: HCI socket layer initialized [ 0.407724] Bluetooth: L2CAP socket layer initialized [ 0.407744] Bluetooth: SCO socket layer initialized [ 0.409407] camchar: rtcpu character device driver loaded [ 0.410210] clocksource: Switched to clocksource arch_sys_counter [ 0.708157] VFS: Disk quotas dquot_6.6.0 [ 0.708236] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.708559] pnp: PnP ACPI: disabled [ 0.720488] la/ptsa driver initialized. [ 0.720627] NET: Registered protocol family 2 [ 0.720800] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.725930] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.726002] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.726328] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.726765] TCP: Hash tables configured (established 65536 bind 65536) [ 0.726890] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.726977] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.727218] NET: Registered protocol family 1 [ 0.728171] RPC: Registered named UNIX socket transport module. [ 0.728198] RPC: Registered udp transport module. [ 0.728212] RPC: Registered tcp transport module. [ 0.728225] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.728249] PCI: CLS 0 bytes, default 64 [ 0.728543] Trying to unpack rootfs image as initramfs... [ 0.991582] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.994911] Freeing initrd memory: 8196K [ 0.998896] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.998967] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.999018] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.999333] kvm [1]: IPA Size Limit: 40 bits [ 0.999803] kvm [1]: vgic interrupt IRQ9 [ 1.000256] kvm [1]: VHE mode initialized successfully [ 1.001687] Initialise system trusted keyrings [ 1.002005] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.008136] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.009104] NFS: Registering the id_resolver key type [ 1.009138] Key type id_resolver registered [ 1.009151] Key type id_legacy registered [ 1.009275] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.009307] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.009373] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.019615] NET: Registered protocol family 38 [ 1.019637] Key type asymmetric registered [ 1.019652] Asymmetric key parser 'x509' registered [ 1.019701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.019921] io scheduler mq-deadline registered [ 1.019938] io scheduler kyber registered [ 1.025361] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.028069] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.028171] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.028242] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.028308] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.028375] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.033449] scrncapt: init (heads:4 wins:6 planes:4) [ 1.033580] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.034608] EINJ: ACPI disabled. [ 1.037753] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.037806] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.037821] tegra-pmc: ### PMC reset level: L1 [ 1.037834] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.037908] tegra-pmc: PMC Prod config success [ 1.042715] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.048009] random: fast init done [ 1.048226] printk: console [ttyTCU0] enabled [ 2.599267] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.604419] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.608817] arm-smmu 10000000.iommu: stage 1 translation [ 2.614410] arm-smmu 10000000.iommu: stage 2 translation [ 2.619662] arm-smmu 10000000.iommu: nested translation [ 2.625000] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.632437] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.641821] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.645583] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.652381] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.659519] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.665172] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.669908] arm-smmu 12000000.iommu: stage 1 translation [ 2.675400] arm-smmu 12000000.iommu: stage 2 translation [ 2.681079] arm-smmu 12000000.iommu: nested translation [ 2.686506] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.693428] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.702724] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.706813] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.713114] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.720690] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.730302] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.733770] tegra_profiler: auth: init [ 2.737662] THERMAL EST: found 3 subdevs [ 2.741468] THERMAL EST num_resources: 0 [ 2.745307] [THERMAL EST subdev 0] [ 2.748629] [THERMAL EST subdev 1] [ 2.751784] [THERMAL EST subdev 2] [ 2.755303] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.761432] THERMAL EST: thz register success. [ 2.765995] THERMAL EST: end of probe, return err: 0 [ 2.770921] nvsciipc: loaded module [ 2.777459] tun: Universal TUN/TAP device driver, 1.6 [ 2.780632] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.787067] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.792349] e1000e: Intel(R) PRO/1000 Network Driver [ 2.797541] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.803614] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.808661] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.815046] PPP generic driver version 2.4.2 [ 2.819352] PPP BSD Compression module registered [ 2.823898] PPP Deflate Compression module registered [ 2.829144] PPP MPPE Compression module registered [ 2.834204] usbcore: registered new interface driver r8152 [ 2.839661] usbcore: registered new interface driver asix [ 2.844986] usbcore: registered new interface driver ax88179_178a [ 2.850850] usbcore: registered new interface driver cdc_ether [ 2.856804] usbcore: registered new interface driver net1080 [ 2.862400] usbcore: registered new interface driver cdc_subset [ 2.868444] usbcore: registered new interface driver zaurus [ 2.874134] usbcore: registered new interface driver cdc_ncm [ 2.879813] usbcore: registered new interface driver aqc111 [ 2.885415] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.891801] ohci-pci: OHCI PCI platform driver [ 2.895858] ohci-platform: OHCI generic platform driver [ 2.901490] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.907746] usbcore: registered new interface driver uas [ 2.912140] usbcore: registered new interface driver usb-storage [ 2.918481] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.924483] mousedev: PS/2 mouse device common for all mice [ 2.929542] usbcore: registered new interface driver xpad [ 2.937208] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.940043] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.948084] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.954561] i2c /dev entries driver [ 2.957909] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.963432] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.968741] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.974142] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.979498] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.984976] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.990644] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.002084] device-mapper: uevent: version 1.0.3 [ 3.002592] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.010732] cpuidle: Initializing cpuidle driver [ 3.014687] sdhci: Secure Digital Host Controller Interface driver [ 3.019892] sdhci: Copyright(c) Pierre Ossman [ 3.023996] Synopsys Designware Multimedia Card Interface Driver [ 3.030141] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.036138] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.036699] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.049253] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.067097] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.075783] vdd-1v0: supplied by regulator-dummy [ 3.081094] vdd-1v8-hs: supplied by regulator-dummy [ 3.085755] vdd-1v8-ls: supplied by regulator-dummy [ 3.090412] vdd-1v8-ao: supplied by regulator-dummy [ 3.094220] vddio-ddr-1v1: supplied by regulator-dummy [ 3.098512] vdd-rtc: supplied by regulator-dummy [ 3.100050] spmic-ldo1: supplied by regulator-dummy [ 3.101150] vdd-ao-3v3: supplied by regulator-dummy [ 3.107248] vddio-emmc-3v3: supplied by regulator-dummy [ 3.113326] spmic-ldo4: supplied by regulator-dummy [ 3.114447] vdd-usb-3v3: supplied by regulator-dummy [ 3.121010] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.127005] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.132391] spmic-ldo8: supplied by vdd-1v8-ls [ 3.133697] gpio-510 (gpio_default): hogged as output/high [ 3.136178] gpio-511 (gpio_default): hogged as output/high [ 3.142990] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.281316] max77686-rtc max77620-rtc: registered as rtc0 [ 3.282256] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.282522] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.982190] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.983096] hid: raw HID events driver (C) Jiri Kosina [ 3.983735] usbcore: registered new interface driver usbhid [ 3.983898] usbhid: USB HID core driver [ 3.985786] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.986897] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.908654] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.984217] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 76.371 ms) ÿá[ 4.072320] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.072931] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.073914] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.074564] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.076143] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.076757] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.077387] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.078605] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.078982] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.080722] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.088551] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.095401] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.099916] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.107228] denver_knobs_init:MTS_VERSION:55637613 [ 4.119880] t19x_cache tegra-cache: probed [ 4.122467] optee: probing for conduit method. [ 4.123295] optee: revision 3.16 (65cc2218) [ 4.124355] optee: dynamic shared memory is enabled [ 4.126964] optee: initialized driver [ 4.133909] nvpmodel: initialized successfully [ 4.134971] tegra_hv: get_hvd: not initialized yet [ 4.139333] user_ivc_mempool: hypervisor not present [ 4.145980] usbcore: registered new interface driver snd-usb-audio [ 4.151897] u32 classifier [ 4.153284] input device check on [ 4.157126] Actions configured [ 4.160691] Initializing XFRM netlink socket [ 4.165369] NET: Registered protocol family 10 [ 4.171096] Segment Routing with IPv6 [ 4.172625] NET: Registered protocol family 17 [ 4.177225] NET: Registered protocol family 15 [ 4.181304] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.195373] Bluetooth: RFCOMM socket layer initialized [ 4.199613] Bluetooth: RFCOMM ver 1.11 [ 4.203709] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.209301] Bluetooth: HIDP socket layer initialized [ 4.215409] 9pnet: Installing 9P2000 support [ 4.219007] Key type dns_resolver registered [ 4.224143] registered taskstats version 1 [ 4.227220] Loading compiled-in X.509 certificates [ 4.239445] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.243476] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.253243] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.255464] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.263676] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.272434] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.390201] tegra194-pcie 14160000.pcie: Link up [ 4.392922] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.393134] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.393327] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.393573] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.393832] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.394250] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.394675] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.404714] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.405190] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.405651] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.407395] pci 0004:01:00.0: supports D1 D2 [ 4.407589] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.416952] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.417285] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.417572] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.417948] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.418327] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.418889] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.425136] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.432456] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.440987] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.450873] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.455975] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.461576] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.468031] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.476416] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.478753] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.487428] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.495677] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.602327] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.602870] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.603063] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.603267] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.603541] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.603771] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.604134] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.604541] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.619600] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.619880] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.621446] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.622857] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.624196] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.625690] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.626670] pci 0005:00:00.0: Removing from iommu group 7 [ 5.626936] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.660038] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.682434] host1x 13e10000.host1x: initialized [ 5.684056] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.685126] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.686529] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.687281] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.688347] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.689148] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.690277] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.690938] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.695619] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.702357] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.712447] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.719105] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.729387] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.736294] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.746544] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.753255] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.763094] falcon 15340000.vic: Adding to iommu group 17 [ 5.777837] falcon 15340000.vic: initialized [ 5.778921] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.784536] falcon 15380000.nvjpg: initialized [ 5.785228] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.796226] falcon 154c0000.nvenc: initialized [ 5.797092] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.806270] falcon 15a80000.nvenc1: initialized [ 5.807098] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.819230] nvdec 15480000.nvdec: initialized [ 5.819853] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.828860] nvdec 15140000.nvdec1: initialized [ 5.829324] tsec 15500000.tsec: Adding to iommu group 18 [ 5.834643] tsec 15500000.tsec: initialized [ 5.835073] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.843380] tsec 15100000.tsecb: initialized [ 5.846976] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.871230] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.881570] gpio-374 (wifi-enable): hogged as output/high [ 5.881862] gpio-431 (camera-control-output-low): hogged as output/low [ 5.882311] gpio-432 (camera-control-output-low): hogged as output/low [ 5.883818] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.885312] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.888011] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.894239] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.899608] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.905623] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.911254] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.919307] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.926704] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.937870] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.943636] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.949649] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.958248] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.967652] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.974999] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.982143] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.988725] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.998365] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.004569] pva 16000000.pva0: Adding to iommu group 22 [ 6.031020] pva 16000000.pva0: initialized [ 6.035676] pva 16800000.pva1: Adding to iommu group 23 [ 6.046727] pva 16800000.pva1: initialized [ 6.051310] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.071001] nvdla 15880000.nvdla0: initialized [ 6.072275] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.080936] nvdla 158c0000.nvdla1: initialized [ 6.083072] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.083392] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.084474] tegradc 15200000.display: Adding to iommu group 26 [ 6.084612] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.085155] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.085235] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.085560] tegradccommon 15200000.display-hub: dma mapping done [ 6.086313] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.091758] tegradc 15210000.display: Adding to iommu group 26 [ 6.093097] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.093360] generic_infoframe_type: 0x87 [ 6.093480] tegradc 15200000.display: DT parsed successfully [ 6.093578] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.094338] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.124078] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.129515] tegra_cec 3960000.tegra_cec: probed [ 6.130547] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.137906] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.144812] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.148507] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.164148] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.171898] kfuse 3830000.kfuse: initialized [ 6.177478] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.188427] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.188853] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.205087] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.212386] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.212559] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.225415] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.226034] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.234710] tegradc 15210000.display: disp0 connected to head1->sor [ 6.242132] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.247477] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.253620] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.260313] tegradc 15210000.display: DT parsed successfully [ 6.269910] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.274440] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.289049] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.308537] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.308936] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.312043] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.320361] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.329077] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.335951] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.343586] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.350654] usb usb1: Product: xHCI Host Controller [ 6.355387] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.361650] usb usb1: SerialNumber: 3610000.xhci [ 6.367452] hub 1-0:1.0: USB hub found [ 6.370463] hub 1-0:1.0: 4 ports detected [ 6.375379] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.379930] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.387252] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.395165] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.403046] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.410011] usb usb2: Product: xHCI Host Controller [ 6.415250] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.421464] usb usb2: SerialNumber: 3610000.xhci [ 6.426865] hub 2-0:1.0: USB hub found [ 6.429647] hub 2-0:1.0: 4 ports detected [ 6.471278] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.476781] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.477833] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.478007] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.490904] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1904000 KHz, changing to: 1907200 KHz [ 6.491885] tegra194-cpufreq ccplex: probed with BWMGR [ 6.492919] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.493627] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.494189] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.495399] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.504118] tegra194-vi5 15c10000.vi: initialized [ 6.505327] mmc0: CQHCI version 5.10 [ 6.505594] tegradc 15210000.display: disp0 connected to head1->sor [ 6.506602] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.506852] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.506857] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.506864] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.506869] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.506873] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.518217] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.519863] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.527630] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.534290] tegradc 15210000.display: DT parsed successfully [ 6.536473] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.541287] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.547109] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.547255] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.609095] generic_infoframe_type: 0x87 [ 6.609901] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.612947] tegradc 15200000.display: DT parsed successfully [ 6.626237] nvethernet 2490000.ethernet: Macsec not supported [ 6.626255] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.632869] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.639711] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.641039] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.641046] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.641051] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.641367] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.641372] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.641548] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.642637] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.642642] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.644902] tegradc 15200000.display: probed [ 6.649045] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.665891] mmc0: Command Queue Engine enabled [ 6.671650] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.679029] mmc0: periodic cache flush enabled [ 6.679062] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.685498] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.692434] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.704037] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.710203] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.719199] tegra-se-nvhost 15810000.se: initialized [ 6.732550] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.744128] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.794438] Console: switching to colour frame buffer device 240x67 [ 6.794648] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.800355] tegradc 15200000.display: fb registered [ 6.811954] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.817354] tegra-se-nvhost 15820000.se: initialized [ 6.818027] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.824207] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.828173] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.834531] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.843761] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.847270] tegra-se-nvhost 15830000.se: initialized [ 6.854781] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.861244] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.866932] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.866938] usb 1-2: Manufacturer: Generic [ 6.869041] hub 1-2:1.0: USB hub found [ 6.873866] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.879113] hub 1-2:1.0: 4 ports detected [ 6.882579] tegra-se-nvhost 15840000.se: initialized [ 6.902995] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.908635] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.908958] tegra_actmon d230000.actmon: in actmon_register()... [ 6.917556] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.922264] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.930191] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.930803] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.935652] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.943217] Extcon AUX1(HDMI) enable [ 6.943352] tegradc 15210000.display: disp1 connected to head1->sor [ 6.950794] hvc_sysfs: hypervisor is not present [ 6.958309] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.959051] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.987497] tegradc 15210000.display: DT parsed successfully [ 6.989367] ALSA device list: [ 6.992964] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.995827] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.995834] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.995838] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.995841] usb 2-3: Manufacturer: Generic [ 6.995988] No soundcards found. [ 7.004268] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.006306] hub 2-3:1.0: USB hub found [ 7.008415] hub 2-3:1.0: 4 ports detected [ 7.046222] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.053089] tegradc 15210000.display: probed [ 7.057176] tegradc 15210000.display: fb registered [ 7.065486] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.069052] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.070926] Freeing unused kernel memory: 3968K [ 7.077011] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.086923] tegradc 15210000.display: blank - powerdown ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.091810] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.091813] Extcon DP: HPD disabled [ 7.091816] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.091845] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.091852] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.091923] tegradc 15200000.display: blank - powerdown [ 7.098338] Run /init as init process [ 7.110204] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.114247] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.125697] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.125701] Extcon AUX1(HDMI) disable [ 7.149255] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.150232] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.163336] tegradc 15200000.display: unblank [ 7.164426] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.164621] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.171735] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.173835] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.174749] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.174753] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.177926] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.177929] Extcon AUX1(HDMI) enable [ 7.190647] tegradc 15200000.display: sync windows ret = 246 [ 7.238697] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.245584] Extcon HDMI: HPD enabled [ 7.249416] tegradc 15200000.display: hdmi: plugged [ 7.263539] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.264974] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.270070] usb 1-3: Product: Bluetooth Radio [ 7.274324] usb 1-3: Manufacturer: Realtek [ 7.278546] usb 1-3: SerialNumber: 00e04c000001 [ 7.293195] Root device found: mmcblk0p1 [ 7.297045] Found dev node: /dev/mmcblk0p1 [ 7.334308] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.339856] Rootfs mounted over mmcblk0p1 [ 7.377830] Switching from initrd to actual rootfs [ 7.540434] systemd[1]: System time before build time, advancing clock. [ 7.612565] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.617464] systemd[1]: Detected architecture arm64. [ 7.665196] systemd[1]: Set hostname to . [ 7.829032] systemd-sysv-generator[249]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.176136] random: systemd: uninitialized urandom read (16 bytes read) [ 8.177875] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.179523] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.185074] systemd[1]: Created slice system-modprobe.slice. [ 8.188624] random: systemd: uninitialized urandom read (16 bytes read) [ 8.191258] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.194308] random: systemd: uninitialized urandom read (16 bytes read) [ 8.196880] systemd[1]: Created slice User and Session Slice. [ 8.200333] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.204415] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.207760] systemd[1]: Reached target User and Group Name Lookups. [ 8.211052] systemd[1]: Reached target Slices. [ 8.212489] random: crng init done [ 8.214007] random: 4 urandom warning(s) missed due to ratelimiting [ 8.217393] systemd[1]: Reached target Swap. [ 8.221532] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.225305] systemd[1]: Listening on Syslog Socket. [ 8.228949] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.232357] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.236747] systemd[1]: Listening on Journal Audit Socket. [ 8.240387] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.244181] systemd[1]: Listening on Journal Socket. [ 8.249370] systemd[1]: Listening on udev Control Socket. [ 8.254400] systemd[1]: Listening on udev Kernel Socket. [ 8.262974] systemd[1]: Mounting Huge Pages File System... [ 8.271409] systemd[1]: Mounting POSIX Message Queue File System... [ 8.279423] systemd[1]: Mounting RPC Pipe File System... [ 8.288057] systemd[1]: Mounting Kernel Debug File System... [ 8.296404] systemd[1]: Mounting Kernel Trace File System... [ 8.305983] systemd[1]: Starting Journal Service... [ 8.316781] systemd[1]: Starting Set the console keyboard layout... [ 8.325862] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.329357] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.335754] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.343689] systemd[1]: Started Nameserver information manager. [ 8.348105] systemd[1]: Reached target Network (Pre). [ 8.355040] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.356957] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.363608] systemd[1]: Starting Load Kernel Modules... [ 8.372526] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.380171] systemd[1]: Starting udev Coldplug all Devices... [ 8.389908] systemd[1]: Mounted Huge Pages File System. [ 8.393689] systemd[1]: Mounted POSIX Message Queue File System. [ 8.397251] systemd[1]: Mounted RPC Pipe File System. [ 8.401085] systemd[1]: Mounted Kernel Debug File System. [ 8.403601] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.404079] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.406704] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.406719] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.406724] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.406907] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.407132] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.407287] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.407295] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.420554] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.446986] systemd[1]: Mounted Kernel Trace File System. [ 8.453413] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.460009] systemd[1]: nvfb-udev.service: Succeeded. [ 8.465627] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.477241] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.490398] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.492149] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.496358] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.496358] [ 8.499061] systemd[1]: Starting Load/Save Random Seed... [ 8.520443] systemd[1]: Starting Create System Users... [ 8.532074] systemd[1]: Finished Load Kernel Modules. [ 8.536449] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.543334] systemd[1]: Mounting Kernel Configuration File System... [ 8.552145] systemd[1]: Started OP-TEE Client Supplicant. [ 8.560687] systemd[1]: Starting Apply Kernel Variables... [ 8.571570] systemd[1]: Finished Load/Save Random Seed. [ 8.575487] systemd[1]: Mounted Kernel Configuration File System. [ 8.587555] systemd[1]: Finished Create System Users. [ 8.593977] systemd[1]: Finished Set the console keyboard layout. [ 8.603396] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.064781] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.072170] imx219 9-0010: board setup failed [ 10.073620] imx219: probe of 9-0010 failed with error -121 [ 10.084757] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.091175] imx219 10-0010: board setup failed [ 10.092474] imx219: probe of 10-0010 failed with error -121 [ 10.130746] hot-surface-alert cooling state: 0 -> 1 [ 10.933505] using random self ethernet address [ 10.981151] using random host ethernet address [ 11.487167] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.487174] Creating 1 MTD partitions on "spi6.0": [ 11.487182] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.323887] using random self ethernet address [ 12.328762] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.752253] nvidia: loading out-of-tree module taints kernel. [ 58.171749] watchdog: watchdog0: watchdog did not stop! [ 58.626959] Trying to unregister non-registered hwtime source [ 61.688934] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.690795] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.358] I> Active Boot chain : 0 [0002.029] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿänalÿâadc initialized ÿä ÿâfmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11ÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä03:ÿâdmce initialized ÿä2ÿâcvc initialized ÿä3:20 UTC 202ÿâavfs_clk_mach_post initialized ÿä2 aaÿâavfs_clk_platform_post initialized ÿärchÿâcvc_late initialized regulator_post initialized ÿä64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: Thÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized entering main console loop ] bpmp: init complete ÿäis OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.480] I> register 'maxim' power off handle [0003.483] I> virtual i2c enabled [0003.483] I> registered 'maxim,max20024' pmic [0003.484] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.607] W> set volts not configured for 'vdd-1v0' [0003.612] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.648] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.649] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.748] calling apps_init() [0003.748] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000672] Console: colour dummy device 80x25 [ 0.002205] printk: console [tty0] enabled [ 0.002287] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002340] pid_max: default: 32768 minimum: 301 [ 0.002534] LSM: Security Framework initializing [ 0.002594] Yama: becoming mindful. [ 0.002657] SELinux: Initializing. [ 0.002840] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002879] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005985] rcu: Hierarchical SRCU implementation. [ 0.006313] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007024] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007072] DTB Build time: Aug 10 2022 20:31:49 [ 0.009803] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010036] Remapping and enabling EFI services. [ 0.012312] smp: Bringing up secondary CPUs ... [ 0.041534] Detected PIPT I-cache on CPU1 [ 0.041611] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071153] Detected PIPT I-cache on CPU2 [ 0.071302] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100919] Detected PIPT I-cache on CPU3 [ 0.101054] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130735] Detected PIPT I-cache on CPU4 [ 0.130905] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160686] Detected PIPT I-cache on CPU5 [ 0.160791] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161143] smp: Brought up 1 node, 6 CPUs [ 0.161399] SMP: Total of 6 processors activated. [ 0.161416] CPU features: detected: Privileged Access Never [ 0.161430] CPU features: detected: LSE atomic instructions [ 0.161461] CPU features: detected: User Access Override [ 0.161476] CPU features: detected: 32-bit EL0 Support [ 0.161491] CPU features: detected: RAS Extension Support [ 0.161507] CPU features: detected: CRC32 instructions [ 0.161521] CPU features: detected: 32-bit EL1 Support [ 0.236474] CPU: All CPU(s) started at EL2 [ 0.241623] devtmpfs: initialized [ 0.290650] Registered cp15_barrier emulation handler [ 0.290807] Registered setend emulation handler [ 0.290829] KASLR enabled [ 0.291100] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291132] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292415] pinctrl core: initialized pinctrl subsystem [ 0.293370] SMBIOS 3.0.0 present. [ 0.293414] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294045] NET: Registered protocol family 16 [ 0.295983] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296485] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297215] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297287] audit: initializing netlink subsys (disabled) [ 0.297622] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.298064] thermal_sys: Registered thermal governor 'step_wise' [ 0.298072] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298090] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300399] cpuidle: using governor menu [ 0.300694] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.301137] ASID allocator initialised with 32768 entries [ 0.301363] Serial: AMBA PL011 UART driver [ 0.304671] Tegra reboot handler registered. [ 0.371535] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.371687] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.371910] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.371972] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.372116] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.372167] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.372279] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.372323] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372440] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372485] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.374714] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.374752] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.374784] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.374815] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.374849] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.374879] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.374942] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.374978] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375027] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375057] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.375084] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.375128] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.375169] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.375196] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.375224] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.375251] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.375279] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.375420] mc-err: mcerr ops are set to t19x [ 0.386955] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.386989] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.387001] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.387012] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.394096] ACPI: Interpreter disabled. [ 0.395324] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.396640] iommu: Default domain type: Translated [ 0.396705] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.397087] SCSI subsystem initialized [ 0.397249] usbcore: registered new interface driver usbfs [ 0.397292] usbcore: registered new interface driver hub [ 0.397343] usbcore: registered new device driver usb [ 0.397728] mc: Linux media interface: v0.10 [ 0.397755] videodev: Linux video capture interface: v2.00 [ 0.398015] pps_core: LinuxPPS API ver. 1 registered [ 0.398026] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.398045] PTP clock support registered [ 0.398227] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.398519] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.398624] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.399161] Registered efivars operations [ 0.405106] FPGA manager framework [ 0.405210] Advanced Linux Sound Architecture Driver Initialized. [ 0.405829] Bluetooth: Core ver 2.22 [ 0.405873] NET: Registered protocol family 31 [ 0.405903] Bluetooth: HCI device and connection manager initialized [ 0.405922] Bluetooth: HCI socket layer initialized [ 0.405938] Bluetooth: L2CAP socket layer initialized [ 0.405960] Bluetooth: SCO socket layer initialized [ 0.407370] camchar: rtcpu character device driver loaded [ 0.408062] clocksource: Switched to clocksource arch_sys_counter [ 0.693911] VFS: Disk quotas dquot_6.6.0 [ 0.693980] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.694269] pnp: PnP ACPI: disabled [ 0.705509] la/ptsa driver initialized. [ 0.705652] NET: Registered protocol family 2 [ 0.705810] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.711089] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.711154] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.711453] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.711889] TCP: Hash tables configured (established 65536 bind 65536) [ 0.712023] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.712151] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.712360] NET: Registered protocol family 1 [ 0.712984] RPC: Registered named UNIX socket transport module. [ 0.712998] RPC: Registered udp transport module. [ 0.713008] RPC: Registered tcp transport module. [ 0.713023] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.713040] PCI: CLS 0 bytes, default 64 [ 0.713207] Trying to unpack rootfs image as initramfs... [ 0.897284] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.899559] Freeing initrd memory: 8196K [ 0.903020] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.903056] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.903107] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.903445] kvm [1]: IPA Size Limit: 40 bits [ 0.903831] kvm [1]: vgic interrupt IRQ9 [ 0.904299] kvm [1]: VHE mode initialized successfully [ 0.905321] Initialise system trusted keyrings [ 0.905530] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.909580] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.910260] NFS: Registering the id_resolver key type [ 0.910293] Key type id_resolver registered [ 0.910303] Key type id_legacy registered [ 0.910366] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.910382] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.910408] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.917862] NET: Registered protocol family 38 [ 0.917883] Key type asymmetric registered [ 0.917894] Asymmetric key parser 'x509' registered [ 0.917935] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.918106] io scheduler mq-deadline registered [ 0.918118] io scheduler kyber registered [ 0.922108] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.924106] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.924165] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.924216] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.924265] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.924337] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.927834] scrncapt: init (heads:4 wins:6 planes:4) [ 0.928202] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.928838] EINJ: ACPI disabled. [ 0.930962] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.930981] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.930992] tegra-pmc: ### PMC reset level: L1 [ 0.931000] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.931045] tegra-pmc: PMC Prod config success [ 0.935669] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.939677] random: fast init done [ 0.939868] printk: console [ttyTCU0] enabled [ 2.492535] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.497104] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.501688] arm-smmu 10000000.iommu: stage 1 translation [ 2.507024] arm-smmu 10000000.iommu: stage 2 translation [ 2.512665] arm-smmu 10000000.iommu: nested translation [ 2.518008] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.525185] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.535101] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.538026] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.544842] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.552611] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.557625] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.562346] arm-smmu 12000000.iommu: stage 1 translation [ 2.568141] arm-smmu 12000000.iommu: stage 2 translation [ 2.573541] arm-smmu 12000000.iommu: nested translation [ 2.578740] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.585917] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.595810] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.599017] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.605827] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.613266] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.622916] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.626309] tegra_profiler: auth: init [ 2.630490] THERMAL EST: found 3 subdevs [ 2.633699] THERMAL EST num_resources: 0 [ 2.637769] [THERMAL EST subdev 0] [ 2.640835] [THERMAL EST subdev 1] [ 2.644528] [THERMAL EST subdev 2] [ 2.647728] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.654241] THERMAL EST: thz register success. [ 2.658477] THERMAL EST: end of probe, return err: 0 [ 2.663505] nvsciipc: loaded module [ 2.670599] tun: Universal TUN/TAP device driver, 1.6 [ 2.673095] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.679261] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.685064] e1000e: Intel(R) PRO/1000 Network Driver [ 2.689749] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.696122] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.701387] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.707596] PPP generic driver version 2.4.2 [ 2.711612] PPP BSD Compression module registered [ 2.716094] PPP Deflate Compression module registered [ 2.721343] PPP MPPE Compression module registered [ 2.726640] usbcore: registered new interface driver r8152 [ 2.732127] usbcore: registered new interface driver asix [ 2.737469] usbcore: registered new interface driver ax88179_178a [ 2.743579] usbcore: registered new interface driver cdc_ether [ 2.749530] usbcore: registered new interface driver net1080 [ 2.754906] usbcore: registered new interface driver cdc_subset [ 2.760943] usbcore: registered new interface driver zaurus [ 2.766898] usbcore: registered new interface driver cdc_ncm [ 2.772542] usbcore: registered new interface driver aqc111 [ 2.777954] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.784276] ohci-pci: OHCI PCI platform driver [ 2.788329] ohci-platform: OHCI generic platform driver [ 2.794381] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.800709] usbcore: registered new interface driver uas [ 2.804596] usbcore: registered new interface driver usb-storage [ 2.810985] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.816769] mousedev: PS/2 mouse device common for all mice [ 2.821779] usbcore: registered new interface driver xpad [ 2.829839] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.832528] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.840272] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.846799] i2c /dev entries driver [ 2.850162] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.856389] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.861511] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.866939] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.872317] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.877807] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.882944] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.896534] device-mapper: uevent: version 1.0.3 [ 2.896959] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.903577] cpuidle: Initializing cpuidle driver [ 2.907676] sdhci: Secure Digital Host Controller Interface driver [ 2.912350] sdhci: Copyright(c) Pierre Ossman [ 2.916194] Synopsys Designware Multimedia Card Interface Driver [ 2.922652] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.928643] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.929430] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.941614] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.965472] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.975217] vdd-1v0: supplied by regulator-dummy [ 2.980680] vdd-1v8-hs: supplied by regulator-dummy [ 2.985535] vdd-1v8-ls: supplied by regulator-dummy [ 2.990395] vdd-1v8-ao: supplied by regulator-dummy [ 2.994317] vddio-ddr-1v1: supplied by regulator-dummy [ 2.998864] vdd-rtc: supplied by regulator-dummy [ 3.000629] spmic-ldo1: supplied by regulator-dummy [ 3.001893] vdd-ao-3v3: supplied by regulator-dummy [ 3.008179] vddio-emmc-3v3: supplied by regulator-dummy [ 3.014461] spmic-ldo4: supplied by regulator-dummy [ 3.015712] vdd-usb-3v3: supplied by regulator-dummy [ 3.022010] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.028220] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.033787] spmic-ldo8: supplied by vdd-1v8-ls [ 3.035280] gpio-510 (gpio_default): hogged as output/high [ 3.036645] gpio-511 (gpio_default): hogged as output/high [ 3.039593] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.175572] max77686-rtc max77620-rtc: registered as rtc0 [ 3.176952] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.177304] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.998330] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.999576] hid: raw HID events driver (C) Jiri Kosina [ 4.000533] usbcore: registered new interface driver usbhid [ 4.000698] usbhid: USB HID core driver [ 4.002718] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.003831] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.000302] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.074853] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.361 ms) ÿá[ 4.088330] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.089010] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.090083] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.090795] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.092928] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.093683] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.094254] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.095761] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.096071] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.097943] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.105179] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.110961] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.116684] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.122965] denver_knobs_init:MTS_VERSION:55637613 [ 4.135187] t19x_cache tegra-cache: probed [ 4.139875] optee: probing for conduit method. [ 4.140902] optee: revision 3.16 (65cc2218) [ 4.142203] optee: dynamic shared memory is enabled [ 4.143554] optee: initialized driver [ 4.151413] nvpmodel: initialized successfully [ 4.152017] tegra_hv: get_hvd: not initialized yet [ 4.155688] user_ivc_mempool: hypervisor not present [ 4.161470] usbcore: registered new interface driver snd-usb-audio [ 4.168028] u32 classifier [ 4.169395] input device check on [ 4.173062] Actions configured [ 4.176508] Initializing XFRM netlink socket [ 4.181487] NET: Registered protocol family 10 [ 4.188261] Segment Routing with IPv6 [ 4.188979] NET: Registered protocol family 17 [ 4.192987] NET: Registered protocol family 15 [ 4.197666] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.210992] Bluetooth: RFCOMM socket layer initialized [ 4.215651] Bluetooth: RFCOMM ver 1.11 [ 4.219811] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.225430] Bluetooth: HIDP socket layer initialized [ 4.231647] 9pnet: Installing 9P2000 support [ 4.234969] Key type dns_resolver registered [ 4.240334] registered taskstats version 1 [ 4.243565] Loading compiled-in X.509 certificates [ 4.256854] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.258992] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.269062] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.271205] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.280120] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.288164] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.404167] tegra194-pcie 14160000.pcie: Link up [ 4.407208] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.407413] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.407594] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.407889] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.408185] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.408580] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.409029] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.421056] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.421469] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.421968] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.423658] pci 0004:01:00.0: supports D1 D2 [ 4.423823] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.435584] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.435913] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.436303] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.436688] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.436986] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.437256] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.438982] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.446416] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.454677] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.464852] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.469313] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.475122] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.482033] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.491128] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.492907] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.501114] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.509824] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.624946] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.625534] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.625762] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.625929] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.626220] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.626485] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.626833] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.627315] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.646990] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.647249] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.649004] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.650298] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.651917] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.653671] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.654751] pci 0005:00:00.0: Removing from iommu group 7 [ 5.655202] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.691357] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.716966] host1x 13e10000.host1x: initialized [ 5.718664] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.719492] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.721124] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.721835] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.723231] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.724041] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.725571] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.726325] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.727389] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.728467] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.735032] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.741914] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.751868] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.759098] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.769170] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.775903] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.785866] falcon 15340000.vic: Adding to iommu group 17 [ 5.800939] falcon 15340000.vic: initialized [ 5.801880] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.807220] falcon 15380000.nvjpg: initialized [ 5.807798] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.819424] falcon 154c0000.nvenc: initialized [ 5.820156] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.828647] falcon 15a80000.nvenc1: initialized [ 5.829265] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.840736] nvdec 15480000.nvdec: initialized [ 5.841251] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.851318] nvdec 15140000.nvdec1: initialized [ 5.851837] tsec 15500000.tsec: Adding to iommu group 18 [ 5.857942] tsec 15500000.tsec: initialized [ 5.858335] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.866639] tsec 15100000.tsecb: initialized [ 5.870452] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.900803] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.914306] gpio-374 (wifi-enable): hogged as output/high [ 5.914618] gpio-431 (camera-control-output-low): hogged as output/low [ 5.914986] gpio-432 (camera-control-output-low): hogged as output/low [ 5.916785] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.919049] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.919697] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.921271] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.922455] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.928309] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.934017] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.942041] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.949755] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.961048] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.966051] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.972224] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.981068] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.990034] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.997303] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.005121] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.011133] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.021109] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.027031] pva 16000000.pva0: Adding to iommu group 22 [ 6.054512] pva 16000000.pva0: initialized [ 6.059411] pva 16800000.pva1: Adding to iommu group 23 [ 6.071422] pva 16800000.pva1: initialized [ 6.075431] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.088590] nvdla 15880000.nvdla0: initialized [ 6.090534] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.099127] nvdla 158c0000.nvdla1: initialized [ 6.103060] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.103397] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.103790] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.104356] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.104727] tegradccommon 15200000.display-hub: dma mapping done [ 6.105005] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.105325] tegradc 15200000.display: Adding to iommu group 26 [ 6.112247] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.116713] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.118078] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.122375] tegra_cec 3960000.tegra_cec: probed [ 6.124391] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.126025] tegradc 15210000.display: Adding to iommu group 26 [ 6.129530] generic_infoframe_type: 0x87 [ 6.141655] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.145538] tegradc 15200000.display: DT parsed successfully [ 6.149793] kfuse 3830000.kfuse: initialized [ 6.155817] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.162110] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.169803] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.173907] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.174607] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.180286] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.180312] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.201092] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.210688] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.219479] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.226313] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.227991] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.232876] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.242079] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.245676] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.255803] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.264514] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.273227] tegradc 15210000.display: disp0 connected to head1->sor [ 6.288191] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.292951] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.298780] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.308634] tegradc 15210000.display: DT parsed successfully [ 6.315954] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.321197] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.343335] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.351751] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.358129] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.365639] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.372982] usb usb1: Product: xHCI Host Controller [ 6.378050] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.384337] usb usb1: SerialNumber: 3610000.xhci [ 6.390148] hub 1-0:1.0: USB hub found [ 6.392838] hub 1-0:1.0: 4 ports detected [ 6.397399] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.402566] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.409830] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.417484] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.425393] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.432628] usb usb2: Product: xHCI Host Controller [ 6.437867] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.444081] usb usb2: SerialNumber: 3610000.xhci [ 6.449465] hub 2-0:1.0: USB hub found [ 6.452588] hub 2-0:1.0: 4 ports detected [ 6.494607] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.500564] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.502173] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.502342] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.515593] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.516686] tegra194-cpufreq ccplex: probed with BWMGR [ 6.517871] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.518288] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.518739] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.520007] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.528424] tegra194-vi5 15c10000.vi: initialized [ 6.529812] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.531098] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.532837] generic_infoframe_type: 0x87 [ 6.539191] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.543037] tegradc 15200000.display: DT parsed successfully [ 6.551067] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.556771] mmc0: CQHCI version 5.10 [ 6.560403] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.563090] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.567587] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.574739] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.581312] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.589504] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.596125] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.596373] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.604296] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.604303] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.640116] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.640877] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.644886] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.645084] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.653270] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.660043] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.669819] nvethernet 2490000.ethernet: Macsec not supported [ 6.671138] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.677602] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.679725] tegradc 15200000.display: probed [ 6.685988] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.700182] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.706420] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.730339] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.738314] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.743566] mmc0: Command Queue Engine enabled [ 6.743571] mmc0: periodic cache flush enabled [ 6.743585] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.743715] Console: switching to colour frame buffer device 240x67 [ 6.744214] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.744988] tegra-se-nvhost 15810000.se: initialized [ 6.747791] tegradc 15200000.display: fb registered [ 6.750020] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.750528] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.751283] tegra-se-nvhost 15820000.se: initialized [ 6.752182] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.753245] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.753782] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.754462] tegra-se-nvhost 15830000.se: initialized [ 6.755632] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.756223] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.756852] tegra-se-nvhost 15840000.se: initialized [ 6.758610] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.758747] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.760368] tegra_actmon d230000.actmon: in actmon_register()... [ 6.760560] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.760931] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.761473] hvc_sysfs: hypervisor is not present [ 6.770118] random: crng init done [ 6.898078] ALSA device list: [ 6.898172] No soundcards found. [ 6.900463] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.900849] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.910212] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.915835] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.916091] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.919802] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.924282] usb 1-2: Manufacturer: Generic [ 6.930725] hub 1-2:1.0: USB hub found [ 6.934081] hub 1-2:1.0: 4 ports detected [ 6.954963] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.956322] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.956526] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.962199] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.968290] Extcon AUX1(HDMI) enable [ 6.972101] tegradc 15210000.display: disp1 connected to head1->sor [ 6.978691] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.985524] tegradc 15210000.display: DT parsed successfully [ 6.991240] tegradc 15210000.display: Display dc.00000000231a886e registered with id=1 [ 6.999193] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.004961] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.018310] tegradc 15210000.display: probed [ 7.018647] tegradc 15210000.display: fb registered [ 7.024135] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.027768] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.033180] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.035835] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.041242] Freeing unused kernel memory: 3968K [ 7.053349] tegradc 15210000.display: blank - powerdown [ 7.058529] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.060238] Run /init as init process [ 7.066982] Extcon DP: HPD disabled [ 7.066986] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.067014] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.074154] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.081387] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.093803] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.109399] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.113884] usb 2-3: Manufacturer: Generic [ 7.129117] hub 2-3:1.0: USB hub found [ 7.131063] hub 2-3:1.0: 4 ports detected [ 7.136125] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.136292] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.145859] tegradc 15200000.display: blank - powerdown [ 7.171553] Root device found: mmcblk0p1 [ 7.173609] Found dev node: /dev/mmcblk0p1 [ 7.188729] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.188735] Extcon AUX1(HDMI) disable [ 7.204125] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.208553] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.212370] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.212476] Rootfs mounted over mmcblk0p1 [ 7.213278] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.225848] tegradc 15200000.display: unblank [ 7.227539] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.227836] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.234216] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.236232] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.240287] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.240290] Extcon AUX1(HDMI) enable [ 7.253007] tegradc 15200000.display: sync windows ret = 247 [ 7.253106] Switching from initrd to actual rootfs [ 7.283905] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.285408] Extcon HDMI: HPD enabled [ 7.286707] tegradc 15200000.display: hdmi: plugged [ 7.353403] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.354865] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.356280] usb 1-3: Product: Bluetooth Radio [ 7.357590] usb 1-3: Manufacturer: Realtek [ 7.358896] usb 1-3: SerialNumber: 00e04c000001 [ 7.454332] systemd[1]: System time before build time, advancing clock. [ 7.526298] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.531221] systemd[1]: Detected architecture arm64. [ 7.579085] systemd[1]: Set hostname to . [ 7.751940] systemd-sysv-generator[254]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.098771] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.100564] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.106261] systemd[1]: Created slice system-modprobe.slice. [ 8.111162] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.115596] systemd[1]: Created slice User and Session Slice. [ 8.119231] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.123703] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.127125] systemd[1]: Reached target User and Group Name Lookups. [ 8.130465] systemd[1]: Reached target Slices. [ 8.133725] systemd[1]: Reached target Swap. [ 8.137926] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.141772] systemd[1]: Listening on Syslog Socket. [ 8.145592] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.149156] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.153691] systemd[1]: Listening on Journal Audit Socket. [ 8.157468] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.161533] systemd[1]: Listening on Journal Socket. [ 8.165713] systemd[1]: Listening on udev Control Socket. [ 8.170849] systemd[1]: Listening on udev Kernel Socket. [ 8.179257] systemd[1]: Mounting Huge Pages File System... [ 8.189155] systemd[1]: Mounting POSIX Message Queue File System... [ 8.197313] systemd[1]: Mounting RPC Pipe File System... [ 8.205986] systemd[1]: Mounting Kernel Debug File System... [ 8.214946] systemd[1]: Mounting Kernel Trace File System... [ 8.225073] systemd[1]: Starting Journal Service... [ 8.234222] systemd[1]: Starting Set the console keyboard layout... [ 8.242518] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.246226] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.252616] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.260697] systemd[1]: Started Nameserver information manager. [ 8.267811] systemd[1]: Reached target Network (Pre). [ 8.274787] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.276818] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.283939] systemd[1]: Starting Load Kernel Modules... [ 8.291893] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.300185] systemd[1]: Starting udev Coldplug all Devices... [ 8.310992] systemd[1]: Mounted Huge Pages File System. [ 8.315136] systemd[1]: Mounted POSIX Message Queue File System. [ 8.319510] systemd[1]: Mounted RPC Pipe File System. [ 8.320383] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.326777] systemd[1]: Mounted Kernel Debug File System. [ 8.330395] systemd[1]: Mounted Kernel Trace File System. [ 8.335033] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.337286] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.339016] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.340567] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.340579] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.340584] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.340829] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.342311] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.348393] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.348404] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.354238] systemd[1]: nvfb-udev.service: Succeeded. [ 8.358346] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.370739] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.379382] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.381464] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.391628] systemd[1]: Starting Load/Save Random Seed... [ 8.401195] systemd[1]: Starting Create System Users... [ 8.444472] systemd[1]: Finished Load/Save Random Seed. [ 8.448776] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.448776] [ 8.457069] systemd[1]: Finished Create System Users. [ 8.466609] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.486897] systemd[1]: Finished Load Kernel Modules. [ 8.491353] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.498627] systemd[1]: Mounting Kernel Configuration File System... [ 8.507489] systemd[1]: Started OP-TEE Client Supplicant. [ 8.516035] systemd[1]: Starting Apply Kernel Variables... [ 8.526513] systemd[1]: Finished Set the console keyboard layout. [ 8.533433] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.540317] systemd[1]: Mounted Kernel Configuration File System. [ 8.544375] systemd[1]: Reached target Local File Systems (Pre). [ 8.549282] systemd[1]: Reached target Local File Systems. [ 8.553000] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 9.923798] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.930629] imx219 9-0010: board setup failed [ 9.930736] imx219: probe of 9-0010 failed with error -121 [ 9.948470] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.955116] imx219 10-0010: board setup failed [ 9.955222] imx219: probe of 10-0010 failed with error -121 [ 10.031062] hot-surface-alert cooling state: 0 -> 1 [ 10.667539] using random self ethernet address [ 10.737364] using random host ethernet address [ 11.906494] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.908195] Creating 1 MTD partitions on "spi6.0": [ 11.909804] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.362223] using random self ethernet address [ 12.363881] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.861158] nvidia: loading out-of-tree module taints kernel. [ 59.109703] watchdog: watchdog0: watchdog did not stop! [ 59.601442] Trying to unregister non-registered hwtime source [ 62.658655] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.660259] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR]ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized ÿä:ÿâpm_post initialized dbells initialized ÿä23:ÿâdmce initialized cvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.421] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.614] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.644] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.744] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000754] Console: colour dummy device 80x25 [ 0.002077] printk: console [tty0] enabled [ 0.002148] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002184] pid_max: default: 32768 minimum: 301 [ 0.002358] LSM: Security Framework initializing [ 0.002415] Yama: becoming mindful. [ 0.002477] SELinux: Initializing. [ 0.002676] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002714] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005812] rcu: Hierarchical SRCU implementation. [ 0.006057] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006933] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006982] DTB Build time: Aug 10 2022 20:31:49 [ 0.009969] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010245] Remapping and enabling EFI services. [ 0.012243] smp: Bringing up secondary CPUs ... [ 0.047084] Detected PIPT I-cache on CPU1 [ 0.047157] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.076892] Detected PIPT I-cache on CPU2 [ 0.076970] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.106529] Detected PIPT I-cache on CPU3 [ 0.106675] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.136273] Detected PIPT I-cache on CPU4 [ 0.136448] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.166065] Detected PIPT I-cache on CPU5 [ 0.166165] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166496] smp: Brought up 1 node, 6 CPUs [ 0.166619] SMP: Total of 6 processors activated. [ 0.166677] CPU features: detected: Privileged Access Never [ 0.166697] CPU features: detected: LSE atomic instructions [ 0.166709] CPU features: detected: User Access Override [ 0.166721] CPU features: detected: 32-bit EL0 Support [ 0.166732] CPU features: detected: RAS Extension Support [ 0.166743] CPU features: detected: CRC32 instructions [ 0.166754] CPU features: detected: 32-bit EL1 Support [ 0.239699] CPU: All CPU(s) started at EL2 [ 0.246252] devtmpfs: initialized [ 0.295613] Registered cp15_barrier emulation handler [ 0.295727] Registered setend emulation handler [ 0.295748] KASLR enabled [ 0.296049] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.296071] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.297456] pinctrl core: initialized pinctrl subsystem [ 0.298473] SMBIOS 3.0.0 present. [ 0.298501] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.299108] NET: Registered protocol family 16 [ 0.301047] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.301545] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.302316] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.302391] audit: initializing netlink subsys (disabled) [ 0.302666] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.303083] thermal_sys: Registered thermal governor 'step_wise' [ 0.303090] thermal_sys: Registered thermal governor 'power_allocator' [ 0.303105] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.305416] cpuidle: using governor menu [ 0.305748] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.306430] ASID allocator initialised with 32768 entries [ 0.306687] Serial: AMBA PL011 UART driver [ 0.310477] Tegra reboot handler registered. [ 0.390127] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.390264] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.390458] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.390506] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.390622] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.390674] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.390832] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.390904] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.391052] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.391098] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.393749] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.393784] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.393812] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.393839] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.393869] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.393896] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.393923] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.393950] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.393998] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.394026] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.394071] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.394127] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.394155] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.394182] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.394210] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.394236] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.394266] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.394370] mc-err: mcerr ops are set to t19x [ 0.407424] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.407447] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.407461] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.407474] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.414921] ACPI: Interpreter disabled. [ 0.416191] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.417630] iommu: Default domain type: Translated [ 0.417700] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.418087] SCSI subsystem initialized [ 0.418267] usbcore: registered new interface driver usbfs [ 0.418312] usbcore: registered new interface driver hub [ 0.418350] usbcore: registered new device driver usb [ 0.418887] mc: Linux media interface: v0.10 [ 0.418935] videodev: Linux video capture interface: v2.00 [ 0.419434] pps_core: LinuxPPS API ver. 1 registered [ 0.419449] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.419492] PTP clock support registered [ 0.419794] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.420112] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.420206] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.420981] Registered efivars operations [ 0.427391] FPGA manager framework [ 0.427508] Advanced Linux Sound Architecture Driver Initialized. [ 0.428167] Bluetooth: Core ver 2.22 [ 0.428213] NET: Registered protocol family 31 [ 0.428230] Bluetooth: HCI device and connection manager initialized [ 0.428246] Bluetooth: HCI socket layer initialized [ 0.428262] Bluetooth: L2CAP socket layer initialized [ 0.428302] Bluetooth: SCO socket layer initialized [ 0.430244] camchar: rtcpu character device driver loaded [ 0.431109] clocksource: Switched to clocksource arch_sys_counter [ 0.749925] VFS: Disk quotas dquot_6.6.0 [ 0.750006] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.750375] pnp: PnP ACPI: disabled [ 0.762859] la/ptsa driver initialized. [ 0.762980] NET: Registered protocol family 2 [ 0.763198] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.768455] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.768589] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.768835] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.769268] TCP: Hash tables configured (established 65536 bind 65536) [ 0.769459] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.769561] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.769778] NET: Registered protocol family 1 [ 0.770473] RPC: Registered named UNIX socket transport module. [ 0.770487] RPC: Registered udp transport module. [ 0.770498] RPC: Registered tcp transport module. [ 0.770507] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.770523] PCI: CLS 0 bytes, default 64 [ 0.770801] Trying to unpack rootfs image as initramfs... [ 0.952971] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.955338] Freeing initrd memory: 8196K [ 0.959640] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.959707] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.959768] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.960168] kvm [1]: IPA Size Limit: 40 bits [ 0.960744] kvm [1]: vgic interrupt IRQ9 [ 0.961272] kvm [1]: VHE mode initialized successfully [ 0.962748] Initialise system trusted keyrings [ 0.963070] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.969295] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.970216] NFS: Registering the id_resolver key type [ 0.970250] Key type id_resolver registered [ 0.970266] Key type id_legacy registered [ 0.970358] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.970382] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.970418] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.980411] NET: Registered protocol family 38 [ 0.980436] Key type asymmetric registered [ 0.980452] Asymmetric key parser 'x509' registered [ 0.980502] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.980702] io scheduler mq-deadline registered [ 0.980724] io scheduler kyber registered [ 0.986992] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.990515] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.990604] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.990684] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.990755] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.990854] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.996406] scrncapt: init (heads:4 wins:6 planes:4) [ 0.996728] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.997681] EINJ: ACPI disabled. [ 1.001083] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.001112] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.001156] tegra-pmc: ### PMC reset level: L1 [ 1.001170] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.001252] tegra-pmc: PMC Prod config success [ 1.006652] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.012073] random: fast init done [ 1.012683] printk: console [ttyTCU0] enabled [ 2.564307] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.568864] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.573470] arm-smmu 10000000.iommu: stage 1 translation [ 2.578775] arm-smmu 10000000.iommu: stage 2 translation [ 2.584439] arm-smmu 10000000.iommu: nested translation [ 2.589510] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.596687] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.607423] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.610043] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.616372] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.624345] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.629418] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.634134] arm-smmu 12000000.iommu: stage 1 translation [ 2.639901] arm-smmu 12000000.iommu: stage 2 translation [ 2.645070] arm-smmu 12000000.iommu: nested translation [ 2.650494] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.657682] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.668302] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.670774] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.677644] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.684782] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.694839] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.697806] tegra_profiler: auth: init [ 2.702010] THERMAL EST: found 3 subdevs [ 2.705708] THERMAL EST num_resources: 0 [ 2.709321] [THERMAL EST subdev 0] [ 2.712874] [THERMAL EST subdev 1] [ 2.716030] [THERMAL EST subdev 2] [ 2.719557] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.725728] THERMAL EST: thz register success. [ 2.730238] THERMAL EST: end of probe, return err: 0 [ 2.735260] nvsciipc: loaded module [ 2.742598] tun: Universal TUN/TAP device driver, 1.6 [ 2.745032] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.751303] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.756605] e1000e: Intel(R) PRO/1000 Network Driver [ 2.761785] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.767866] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.773161] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.779423] PPP generic driver version 2.4.2 [ 2.783388] PPP BSD Compression module registered [ 2.787912] PPP Deflate Compression module registered [ 2.793129] PPP MPPE Compression module registered [ 2.798402] usbcore: registered new interface driver r8152 [ 2.803659] usbcore: registered new interface driver asix [ 2.809246] usbcore: registered new interface driver ax88179_178a [ 2.815368] usbcore: registered new interface driver cdc_ether [ 2.821062] usbcore: registered new interface driver net1080 [ 2.826657] usbcore: registered new interface driver cdc_subset [ 2.832973] usbcore: registered new interface driver zaurus [ 2.838682] usbcore: registered new interface driver cdc_ncm [ 2.844336] usbcore: registered new interface driver aqc111 [ 2.850002] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.856101] ohci-pci: OHCI PCI platform driver [ 2.860344] ohci-platform: OHCI generic platform driver [ 2.866241] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.872368] usbcore: registered new interface driver uas [ 2.876382] usbcore: registered new interface driver usb-storage [ 2.882572] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.888882] mousedev: PS/2 mouse device common for all mice [ 2.893801] usbcore: registered new interface driver xpad [ 2.901879] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.904544] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.912075] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.918922] i2c /dev entries driver [ 2.922242] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.928017] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.933050] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.938558] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.943799] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.949288] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.954744] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.969368] device-mapper: uevent: version 1.0.3 [ 2.969837] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.975186] cpuidle: Initializing cpuidle driver [ 2.979467] sdhci: Secure Digital Host Controller Interface driver [ 2.984131] sdhci: Copyright(c) Pierre Ossman [ 2.987997] Synopsys Designware Multimedia Card Interface Driver [ 2.994506] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.000195] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.001086] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.013690] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.036552] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.046120] vdd-1v0: supplied by regulator-dummy [ 3.051621] vdd-1v8-hs: supplied by regulator-dummy [ 3.056426] vdd-1v8-ls: supplied by regulator-dummy [ 3.061410] vdd-1v8-ao: supplied by regulator-dummy [ 3.065344] vddio-ddr-1v1: supplied by regulator-dummy [ 3.069847] vdd-rtc: supplied by regulator-dummy [ 3.071676] spmic-ldo1: supplied by regulator-dummy [ 3.072945] vdd-ao-3v3: supplied by regulator-dummy [ 3.079221] vddio-emmc-3v3: supplied by regulator-dummy [ 3.085572] spmic-ldo4: supplied by regulator-dummy [ 3.086804] vdd-usb-3v3: supplied by regulator-dummy [ 3.093043] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.099248] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.104937] spmic-ldo8: supplied by vdd-1v8-ls [ 3.106442] gpio-510 (gpio_default): hogged as output/high [ 3.107857] gpio-511 (gpio_default): hogged as output/high [ 3.110858] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.246638] max77686-rtc max77620-rtc: registered as rtc0 [ 3.247739] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.248127] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.075406] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.076597] hid: raw HID events driver (C) Jiri Kosina [ 4.077627] usbcore: registered new interface driver usbhid [ 4.077779] usbhid: USB HID core driver [ 4.080119] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.081532] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.014731] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.088685] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 74.764 ms) ÿá[ 4.165731] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.166455] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.167648] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.168481] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.170129] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.170898] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.171604] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.172876] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.173206] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.175706] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.182275] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.188614] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.193754] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.199397] denver_knobs_init:MTS_VERSION:55637613 [ 4.213674] t19x_cache tegra-cache: probed [ 4.217386] optee: probing for conduit method. [ 4.218279] optee: revision 3.16 (65cc2218) [ 4.219540] optee: dynamic shared memory is enabled [ 4.220949] optee: initialized driver [ 4.229899] nvpmodel: initialized successfully [ 4.230822] tegra_hv: get_hvd: not initialized yet [ 4.232694] user_ivc_mempool: hypervisor not present [ 4.239327] usbcore: registered new interface driver snd-usb-audio [ 4.245583] u32 classifier [ 4.246433] input device check on [ 4.250204] Actions configured [ 4.254024] Initializing XFRM netlink socket [ 4.259053] NET: Registered protocol family 10 [ 4.265801] Segment Routing with IPv6 [ 4.266082] NET: Registered protocol family 17 [ 4.270516] NET: Registered protocol family 15 [ 4.274659] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.288341] Bluetooth: RFCOMM socket layer initialized [ 4.293219] Bluetooth: RFCOMM ver 1.11 [ 4.296890] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.302937] Bluetooth: HIDP socket layer initialized [ 4.308718] 9pnet: Installing 9P2000 support [ 4.312395] Key type dns_resolver registered [ 4.317683] registered taskstats version 1 [ 4.320820] Loading compiled-in X.509 certificates [ 4.333392] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.336719] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.346535] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.348784] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.357050] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.365681] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.483207] tegra194-pcie 14160000.pcie: Link up [ 4.486206] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.486402] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.486582] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.487027] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.487381] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.487810] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.488343] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.502914] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.503591] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.504044] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.505648] pci 0004:01:00.0: supports D1 D2 [ 4.505886] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.517823] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.518140] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.518558] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.519265] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.519577] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.519827] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.520091] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.525483] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.533666] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.544791] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.548783] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.554457] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.561305] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.571109] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.571861] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.580134] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.588822] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.704288] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.705064] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.705312] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.705563] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.705816] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.706093] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.706497] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.706995] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.725562] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.726004] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.728080] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.729425] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.731095] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.732887] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.733862] pci 0005:00:00.0: Removing from iommu group 7 [ 5.734137] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.767952] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.789565] host1x 13e10000.host1x: initialized [ 5.791392] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.792312] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.793594] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.794400] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.795720] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.796310] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.797257] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.797811] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.798555] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.804219] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.814509] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.821321] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.831194] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.838414] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.848045] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.855179] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.865107] falcon 15340000.vic: Adding to iommu group 17 [ 5.880277] falcon 15340000.vic: initialized [ 5.881287] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.886254] falcon 15380000.nvjpg: initialized [ 5.886879] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.897418] falcon 154c0000.nvenc: initialized [ 5.897982] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.907450] falcon 15a80000.nvenc1: initialized [ 5.908024] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.921244] nvdec 15480000.nvdec: initialized [ 5.921831] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.930686] nvdec 15140000.nvdec1: initialized [ 5.931204] tsec 15500000.tsec: Adding to iommu group 18 [ 5.936210] tsec 15500000.tsec: initialized [ 5.936663] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.945390] tsec 15100000.tsecb: initialized [ 5.949160] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.974099] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.985095] gpio-374 (wifi-enable): hogged as output/high [ 5.985430] gpio-431 (camera-control-output-low): hogged as output/low [ 5.985690] gpio-432 (camera-control-output-low): hogged as output/low [ 5.987505] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.989026] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.989896] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.996412] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.001935] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.007424] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.013413] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.021881] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.029291] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.040306] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.046171] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.051450] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.060241] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.069562] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.077207] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.084430] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.090787] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.100478] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.106461] pva 16000000.pva0: Adding to iommu group 22 [ 6.132325] pva 16000000.pva0: initialized [ 6.137611] pva 16800000.pva1: Adding to iommu group 23 [ 6.148366] pva 16800000.pva1: initialized [ 6.153389] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.166388] nvdla 15880000.nvdla0: initialized [ 6.167806] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.176652] nvdla 158c0000.nvdla1: initialized [ 6.178956] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.179338] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.179643] tegradccommon 15200000.display-hub: dma mapping done [ 6.181436] tegradc 15200000.display: Adding to iommu group 26 [ 6.188612] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.188969] generic_infoframe_type: 0x87 [ 6.189225] tegradc 15200000.display: DT parsed successfully [ 6.189554] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.196159] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.197146] tegradc 15210000.display: Adding to iommu group 26 [ 6.202901] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.217129] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.220786] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.220846] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.228508] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.228518] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.243010] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.250795] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.256388] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.268604] tegra_cec 3960000.tegra_cec: probed [ 6.273351] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.274335] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.291610] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.296455] kfuse 3830000.kfuse: initialized [ 6.297224] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.300923] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.314109] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.314525] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.321393] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.330014] tegradc 15210000.display: disp0 connected to head1->sor [ 6.334472] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.339669] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.352613] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.355667] tegradc 15210000.display: DT parsed successfully [ 6.362562] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.367331] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.385122] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.390637] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.409826] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.410190] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.413956] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.422117] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.430851] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.437323] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.444938] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.452180] usb usb1: Product: xHCI Host Controller [ 6.457135] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.463395] usb usb1: SerialNumber: 3610000.xhci [ 6.468965] hub 1-0:1.0: USB hub found [ 6.471765] hub 1-0:1.0: 4 ports detected [ 6.476261] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.481399] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.488985] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.496665] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.504296] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.511781] usb usb2: Product: xHCI Host Controller [ 6.516512] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.522979] usb usb2: SerialNumber: 3610000.xhci [ 6.528239] hub 2-0:1.0: USB hub found [ 6.531780] hub 2-0:1.0: 4 ports detected [ 6.570752] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.576357] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.577905] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.578131] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.591266] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.592268] tegra194-cpufreq ccplex: probed with BWMGR [ 6.593366] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.594178] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.594620] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.595832] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.605975] tegra194-vi5 15c10000.vi: initialized [ 6.607155] mmc0: CQHCI version 5.10 [ 6.607395] tegradc 15210000.display: disp0 connected to head1->sor [ 6.608445] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.608673] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.615188] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.621106] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.629453] tegradc 15210000.display: DT parsed successfully [ 6.636640] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.642763] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.642895] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.648479] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.655471] generic_infoframe_type: 0x87 [ 6.655517] tegradc 15200000.display: DT parsed successfully [ 6.663240] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.669735] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.683159] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.690310] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.692312] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.692328] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.692333] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.692336] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.706901] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.714576] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.721253] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.721425] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.730765] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.735159] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.738810] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.751784] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.762138] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.765326] ************************************** [ 6.765330] CPU:0, Error:cbb-noc [ 6.765333] Error Logger : 0 [ 6.765344] ErrLog0 : 0x80030000 [ 6.765351] Transaction Type : RD - Read, Incrementing [ 6.775512] nvethernet 2490000.ethernet: Macsec not supported [ 6.783088] Error Code : SLV [ 6.783091] Error Source : Target [ 6.783094] Error Description : Target error detected by CBB slave [ 6.783104] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.783111] Packet header Lock : 0 [ 6.783114] Packet header Len1 : 3 [ 6.783145] NOC protocol version : version >= 2.7 [ 6.868928] ErrLog1 : 0x352424 [ 6.872251] ErrLog2 : 0x0 [ 6.874881] RouteId : 0x352424 [ 6.878293] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.883363] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.888088] TargSubRange : 18 [ 6.891068] SeqId : 0 [ 6.894214] ErrLog3 : 0x4045c [ 6.897626] ErrLog4 : 0x0 [ 6.900532] Address accessed : 0x15b4045c [ 6.904719] ErrLog5 : 0x909f851 [ 6.907957] Non-Modify : 0x1 [ 6.911626] AXI ID : 0x12 [ 6.914776] Master ID : CCPLEX [ 6.918102] Security Group(GRPSEC): 0x7e [ 6.922044] Cache : 0x1 -- Bufferable [ 6.926245] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.933327] FALCONSEC : 0x0 [ 6.936475] Virtual Queuing Channel(VQC): 0x0 [ 6.940857] ************************************** [ 6.946153] ------------[ cut here ]------------ [ 6.950651] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.957216] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.962466] Modules linked in: [ 6.965187] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 6.971831] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.984344] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.990383] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 6.995102] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 6.999825] sp : ffff800010003b30 [ 7.003245] x29: ffff800010003b30 x28: 0000000000000001 [ 7.008667] x27: 0000000000000005 x26: ffffd4d80c7b3f58 [ 7.013847] x25: ffffd4d80d10ce10 x24: 0000000000000001 [ 7.019512] x23: ffffd4d80caa7000 x22: ffffd4d80cf2ea00 [ 7.024852] x21: 000000000000000f x20: ffff334800e66880 [ 7.030362] x19: ffffd4d80cf2ea00 x18: 0000000000000010 [ 7.035530] x17: ffffd4d80bc15180 x16: ffffd4d80bc149f0 [ 7.041126] x15: ffffd4d80cda2bf0 x14: 0720072007200720 [ 7.046381] x13: 0720072007200720 x12: 0720072007200720 [ 7.052151] x11: 0720072007200720 x10: 0720072007200720 [ 7.057679] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.063175] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.068690] x5 : 0000000000057fa8 x4 : ffffd4d80cdb7968 [ 7.074114] x3 : 00000000ffffffff x2 : ffffd4d80b24e090 [ 7.079451] x1 : ffffd4d80cda2680 x0 : 0000000100010101 [ 7.084530] Call trace: [ 7.086985] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.091274] __handle_irq_event_percpu+0x68/0x2a0 [ 7.095997] handle_irq_event_percpu+0x40/0xa0 [ 7.100542] handle_irq_event+0x50/0xf0 [ 7.104046] handle_fasteoi_irq+0xc0/0x170 [ 7.108345] generic_handle_irq+0x40/0x60 [ 7.112354] __handle_domain_irq+0x70/0xd0 [ 7.116555] efi_header_end+0xb0/0xf0 [ 7.120053] el1_irq+0xd0/0x180 [ 7.122770] __do_softirq+0xb4/0x3e8 [ 7.126448] irq_exit+0xc0/0xe0 [ 7.129679] __handle_domain_irq+0x74/0xd0 [ 7.133446] efi_header_end+0xb0/0xf0 [ 7.137378] el1_irq+0xd0/0x180 [ 7.140355] cpuidle_enter_state+0xb8/0x410 [ 7.144378] cpuidle_enter+0x40/0x60 [ 7.148054] call_cpuidle+0x44/0x80 [ 7.151296] do_idle+0x208/0x270 [ 7.154789] cpu_startup_entry+0x2c/0x70 [ 7.158642] rest_init+0xdc/0xe8 [ 7.162057] arch_call_rest_init+0x18/0x20 [ 7.165998] start_kernel+0x514/0x54c [ 7.169847] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.176060] ---[ end trace 49153e6c9d192540 ]--- [ 7.180345] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.187870] SMP: stopping secondary CPUs [ 7.191996] Kernel Offset: 0x54d7fb090000 from 0xffff800010000000 [ 7.198019] PHYS_OFFSET: 0xffffccb900000000 [ 7.202133] CPU features: 0x8240002,03802a30 [ 7.206850] Memory Limit: none [ 7.209750] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 67000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.355] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.356] I> Active Boot chain : 0 [0002.027] I> Relocating BR-BCT [0002.029] > DEVICE_PROD: device prod is not initialized. [0002.335] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.336] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.336] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.337] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.337] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.338] I> dram_block larger than 80000000 [0002.340] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.351] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.355] I> found decompressor handler: lz4 [0002.583] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.585] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.204] I> Welcome to NVDisp-Init [0003.204] I> NVDisp-Init version: t194-f9ecfedc [0003.204] I> CPU-BL Params @ 0xca020000 [0003.205] I> 0) Base:0x00000000 Size:0x00000000 [0003.205] I> 1) Base:0xc8300000 Size:0x00100000 [0003.205] I> 2) Base:0xc9800000 Size:0x00200000 [0003.206] I> 3) Base:0xc8600000 Size:0x00200000 [0003.208] I> 4) Base:0xc8200000 Size:0x00100000 [0003.213] I> 5) Base:0xc8100000 Size:0x00100000 [0003.217] I> 6) Base:0xc9400000 Size:0x00400000 [0003.221] I> 7) Base:0xc9000000 Size:0x00400000 [0003.226] I> 8) Base:0xc8000000 Size:0x00100000 [0003.230] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.235] I> 10) Base:0xca800000 Size:0x00800000 [0003.239] I> 11) Base:0x40000000 Size:0x00040000 [0003.244] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.248] I> 13) Base:0x40046000 Size:0x00002000 [0003.253] I> 14) Base:0x40048000 Size:0x00002000 [0003.257] I> 15) Base:0xaf000000 Size:0x00004000 [0003.262] I> 16) Base:0x4004a000 Size:0x00002000 [0003.266] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.271] I> 18) Base:0x4004c000 Size:0x00002000 [0003.275] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.279] I> 20) Base:0x4004e000 Size:0x00002000 [0003.284] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.288] I> 22) Base:0x00000000 Size:0x00000000 [0003.293] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.297] I> 24) Base:0xcc000000 Size:0x02000000 [0003.302] I> 25) Base:0x40050000 Size:0x00002000 [0003.306] I> 26) Base:0x40040000 Size:0x00006000 [0003.311] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.315] I> 28) Base:0xc8400000 Size:0x00200000 [0003.320] I> 29) Base:0xc8800000 Size:0x00400000 [0003.324] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.329] I> 31) Base:0x00000000 Size:0x00000000 [0003.333] I> 32) Base:0xf8000000 Size:0x08000000 [0003.337] I> 33) Base:0xce000000 Size:0x2a000000 [0003.342] I> 34) Base:0xcb000000 Size:0x01000000 [0003.346] I> 35) Base:0xae000000 Size:0x01000000 [0003.351] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.355] I> 37) Base:0xca000000 Size:0x00800000 [0003.360] I> 38) Base:0x80000000 Size:0x20000000 [0003.364] I> 39) Base:0xb0000000 Size:0x08000000 [0003.369] I> 40) Base:0x00000000 Size:0x00000000 [0003.373] I> 41) Base:0x00000000 Size:0x00000000 [0003.378] I> 42) Base:0x00000000 Size:0x00000000 [0003.382] I> 43) Base:0x00000000 Size:0x00000000 [0003.387] I> 44) Base:0x00000000 Size:0x00000000 [0003.391] I> 45) Base:0x00000000 Size:0x00000000 [0003.396] GIC-SPI Target CPU: 0 [0003.398] Interrupts Init done [0003.401] calling constructors [0003.404] initializing heap [0003.407] I> Heap: [0xa0960000 ... 0xadf00000] [0003.411] initializing threads [0003.414] initializing timers [0003.417] creating bootstrap completion thread [0003.421] top of bootstrap2() [0003.424] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.429] initializing platform [0003.432] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.437] W> device prod register failed [0003.441] I> Bl_dtb @0xadf00000 [0003.444] I> gpio framework initialized [0003.455] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.466] I> fixed regulator driver initialized [0003.480] I> register 'maxim' power off handle [0003.482] I> virtual i2c enabled [0003.483] I> registered 'maxim,max20024' pmic [0003.483] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.485] I> Boot-device: QSPI [0003.488] I> Boot_device: QSPI_FLASH instance: 0 [0003.492] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.503] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.510] I> QSPI source rate = 204000 Khz [0003.513] I> Requested rate for QSPI clock = 34000 Khz [0003.519] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.523] I> tx_clk_tap_delay : 0 [0003.526] I> rx_clk_tap_delay : 16 [0003.530] I> QSPI Flash Size = 32 MB [0003.537] I> Qspi initialized successfully [0003.538] I> qspi flash-0 params source = boot args [0003.542] W> No board IDs available [0003.545] E> Failed to get board id info! [0003.551] I> sdmmc-3 params source = safe params [0003.558] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.559] W> Cannot find any partition table for 00000003 [0003.564] E> Failed to publish 00000003 [0003.568] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.636] I> edid read success [0003.648] I> edid read success [0003.649] I> width = 640, height = 480, frequency = 25174825 [0003.649] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.650] I> width = 1360, height = 768, frequency = 85500000 [0003.650] I> width = 720, height = 480, frequency = 26973026 [0003.654] I> width = 720, height = 576, frequency = 26973026 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.688] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.748] calling apps_init() [0003.749] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000646] Console: colour dummy device 80x25 [ 0.002156] printk: console [tty0] enabled [ 0.002239] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002273] pid_max: default: 32768 minimum: 301 [ 0.002514] LSM: Security Framework initializing [ 0.002575] Yama: becoming mindful. [ 0.002620] SELinux: Initializing. [ 0.002800] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002846] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005920] rcu: Hierarchical SRCU implementation. [ 0.006193] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006915] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006951] DTB Build time: Aug 10 2022 20:31:49 [ 0.009675] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009896] Remapping and enabling EFI services. [ 0.012067] smp: Bringing up secondary CPUs ... [ 0.042122] Detected PIPT I-cache on CPU1 [ 0.042180] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074344] Detected PIPT I-cache on CPU2 [ 0.074446] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103965] Detected PIPT I-cache on CPU3 [ 0.104141] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133850] Detected PIPT I-cache on CPU4 [ 0.133949] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163624] Detected PIPT I-cache on CPU5 [ 0.163720] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164071] smp: Brought up 1 node, 6 CPUs [ 0.164284] SMP: Total of 6 processors activated. [ 0.164323] CPU features: detected: Privileged Access Never [ 0.164345] CPU features: detected: LSE atomic instructions [ 0.164359] CPU features: detected: User Access Override [ 0.164390] CPU features: detected: 32-bit EL0 Support [ 0.164403] CPU features: detected: RAS Extension Support [ 0.164416] CPU features: detected: CRC32 instructions [ 0.164428] CPU features: detected: 32-bit EL1 Support [ 0.233457] CPU: All CPU(s) started at EL2 [ 0.239123] devtmpfs: initialized [ 0.288956] Registered cp15_barrier emulation handler [ 0.289086] Registered setend emulation handler [ 0.289106] KASLR enabled [ 0.289446] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289471] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290958] pinctrl core: initialized pinctrl subsystem [ 0.291999] SMBIOS 3.0.0 present. [ 0.292043] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292775] NET: Registered protocol family 16 [ 0.294755] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295263] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296001] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296078] audit: initializing netlink subsys (disabled) [ 0.296355] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296736] thermal_sys: Registered thermal governor 'step_wise' [ 0.296745] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296761] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298957] cpuidle: using governor menu [ 0.299229] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299660] ASID allocator initialised with 32768 entries [ 0.299882] Serial: AMBA PL011 UART driver [ 0.303230] Tegra reboot handler registered. [ 0.368658] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.368774] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.368991] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.369060] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.369207] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.369250] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.369383] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.369423] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.369559] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.369603] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.372146] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.372179] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.372204] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.372251] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.372278] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.372319] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.372343] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.372366] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.372405] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.372429] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.372452] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.372475] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.372512] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.372535] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.372559] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.372583] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.372606] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.372690] mc-err: mcerr ops are set to t19x [ 0.384565] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.384590] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.384623] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.384635] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.392482] ACPI: Interpreter disabled. [ 0.394173] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.395955] iommu: Default domain type: Translated [ 0.396076] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.396635] SCSI subsystem initialized [ 0.396914] usbcore: registered new interface driver usbfs [ 0.396982] usbcore: registered new interface driver hub [ 0.397047] usbcore: registered new device driver usb [ 0.397637] mc: Linux media interface: v0.10 [ 0.397695] videodev: Linux video capture interface: v2.00 [ 0.398187] pps_core: LinuxPPS API ver. 1 registered [ 0.398205] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.398235] PTP clock support registered [ 0.398548] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.398868] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.398970] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.399881] Registered efivars operations [ 0.406713] FPGA manager framework [ 0.406867] Advanced Linux Sound Architecture Driver Initialized. [ 0.407686] Bluetooth: Core ver 2.22 [ 0.407764] NET: Registered protocol family 31 [ 0.407782] Bluetooth: HCI device and connection manager initialized [ 0.407804] Bluetooth: HCI socket layer initialized [ 0.407849] Bluetooth: L2CAP socket layer initialized [ 0.407885] Bluetooth: SCO socket layer initialized [ 0.409843] camchar: rtcpu character device driver loaded [ 0.410679] clocksource: Switched to clocksource arch_sys_counter [ 0.815406] VFS: Disk quotas dquot_6.6.0 [ 0.815503] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.815961] pnp: PnP ACPI: disabled [ 0.828745] la/ptsa driver initialized. [ 0.828891] NET: Registered protocol family 2 [ 0.829103] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.838013] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.838176] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.838565] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.839322] TCP: Hash tables configured (established 65536 bind 65536) [ 0.839566] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.839707] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.840068] NET: Registered protocol family 1 [ 0.840878] RPC: Registered named UNIX socket transport module. [ 0.840907] RPC: Registered udp transport module. [ 0.840927] RPC: Registered tcp transport module. [ 0.840946] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.840993] PCI: CLS 0 bytes, default 64 [ 0.841323] Trying to unpack rootfs image as initramfs... [ 1.095353] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.098427] Freeing initrd memory: 8196K [ 1.103074] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.103115] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.103152] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.103498] kvm [1]: IPA Size Limit: 40 bits [ 1.104009] kvm [1]: vgic interrupt IRQ9 [ 1.104441] kvm [1]: VHE mode initialized successfully [ 1.105837] Initialise system trusted keyrings [ 1.106107] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.112949] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.113870] NFS: Registering the id_resolver key type [ 1.113909] Key type id_resolver registered [ 1.113925] Key type id_legacy registered [ 1.114019] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.114045] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.114086] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.123869] NET: Registered protocol family 38 [ 1.123893] Key type asymmetric registered [ 1.123908] Asymmetric key parser 'x509' registered [ 1.123951] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.124207] io scheduler mq-deadline registered [ 1.124226] io scheduler kyber registered [ 1.130470] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.133432] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.133512] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.133584] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.133655] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.133728] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.139308] scrncapt: init (heads:4 wins:6 planes:4) [ 1.139416] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.140473] EINJ: ACPI disabled. [ 1.144197] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.144254] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.144271] tegra-pmc: ### PMC reset level: L1 [ 1.144285] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.144338] tegra-pmc: PMC Prod config success [ 1.149315] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.155008] random: fast init done [ 1.155322] printk: console [ttyTCU0] enabled [ 2.706537] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.711219] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.715746] arm-smmu 10000000.iommu: stage 1 translation [ 2.721253] arm-smmu 10000000.iommu: stage 2 translation [ 2.726513] arm-smmu 10000000.iommu: nested translation [ 2.732106] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.739284] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.748633] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.752678] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.758988] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.766721] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.772273] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.776990] arm-smmu 12000000.iommu: stage 1 translation [ 2.782499] arm-smmu 12000000.iommu: stage 2 translation [ 2.787667] arm-smmu 12000000.iommu: nested translation [ 2.793374] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.800552] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.809754] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.813398] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.820219] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.827675] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.837448] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.840353] tegra_profiler: auth: init [ 2.844904] THERMAL EST: found 3 subdevs [ 2.848058] THERMAL EST num_resources: 0 [ 2.852146] [THERMAL EST subdev 0] [ 2.855211] [THERMAL EST subdev 1] [ 2.858881] [THERMAL EST subdev 2] [ 2.861848] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.868335] THERMAL EST: thz register success. [ 2.872567] THERMAL EST: end of probe, return err: 0 [ 2.878146] nvsciipc: loaded module [ 2.885225] tun: Universal TUN/TAP device driver, 1.6 [ 2.887577] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.893882] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.899469] e1000e: Intel(R) PRO/1000 Network Driver [ 2.904381] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.910477] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.915757] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.921717] PPP generic driver version 2.4.2 [ 2.925927] PPP BSD Compression module registered [ 2.930735] PPP Deflate Compression module registered [ 2.935724] PPP MPPE Compression module registered [ 2.941006] usbcore: registered new interface driver r8152 [ 2.946530] usbcore: registered new interface driver asix [ 2.951579] usbcore: registered new interface driver ax88179_178a [ 2.957703] usbcore: registered new interface driver cdc_ether [ 2.963693] usbcore: registered new interface driver net1080 [ 2.969255] usbcore: registered new interface driver cdc_subset [ 2.975317] usbcore: registered new interface driver zaurus [ 2.981246] usbcore: registered new interface driver cdc_ncm [ 2.986701] usbcore: registered new interface driver aqc111 [ 2.992324] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.998631] ohci-pci: OHCI PCI platform driver [ 3.002716] ohci-platform: OHCI generic platform driver [ 3.008497] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.015178] usbcore: registered new interface driver uas [ 3.018981] usbcore: registered new interface driver usb-storage [ 3.025354] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.031396] mousedev: PS/2 mouse device common for all mice [ 3.036423] usbcore: registered new interface driver xpad [ 3.044224] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.046845] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.054917] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.061260] i2c /dev entries driver [ 3.064585] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.070598] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.075627] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.081072] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.086626] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.092133] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.097354] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.111084] device-mapper: uevent: version 1.0.3 [ 3.111544] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.117787] cpuidle: Initializing cpuidle driver [ 3.122059] sdhci: Secure Digital Host Controller Interface driver [ 3.126742] sdhci: Copyright(c) Pierre Ossman [ 3.130555] Synopsys Designware Multimedia Card Interface Driver [ 3.136779] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.142742] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.148931] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.156345] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.177434] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.187024] vdd-1v0: supplied by regulator-dummy [ 3.192501] vdd-1v8-hs: supplied by regulator-dummy [ 3.197304] vdd-1v8-ls: supplied by regulator-dummy [ 3.202131] vdd-1v8-ao: supplied by regulator-dummy [ 3.206076] vddio-ddr-1v1: supplied by regulator-dummy [ 3.210486] vdd-rtc: supplied by regulator-dummy [ 3.212307] spmic-ldo1: supplied by regulator-dummy [ 3.213517] vdd-ao-3v3: supplied by regulator-dummy [ 3.219669] vddio-emmc-3v3: supplied by regulator-dummy [ 3.225997] spmic-ldo4: supplied by regulator-dummy [ 3.227232] vdd-usb-3v3: supplied by regulator-dummy [ 3.233409] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.239622] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.245146] spmic-ldo8: supplied by vdd-1v8-ls [ 3.246694] gpio-510 (gpio_default): hogged as output/high [ 3.248242] gpio-511 (gpio_default): hogged as output/high [ 3.251155] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.388913] max77686-rtc max77620-rtc: registered as rtc0 [ 3.390263] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.390638] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.211361] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.212620] hid: raw HID events driver (C) Jiri Kosina [ 4.213485] usbcore: registered new interface driver usbhid [ 4.213661] usbhid: USB HID core driver [ 4.215797] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.217131] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.973886] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.048087] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 75.009 ms) ÿá[ 4.301412] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.301926] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.302999] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.303680] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.305231] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.305917] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.306529] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.308041] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.308303] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.311031] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.318448] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.324080] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.328908] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.335372] denver_knobs_init:MTS_VERSION:55637613 [ 4.347502] t19x_cache tegra-cache: probed [ 4.350990] optee: probing for conduit method. [ 4.351907] optee: revision 3.16 (65cc2218) [ 4.353359] optee: dynamic shared memory is enabled [ 4.356613] optee: initialized driver [ 4.364632] nvpmodel: initialized successfully [ 4.365403] tegra_hv: get_hvd: not initialized yet [ 4.368762] user_ivc_mempool: hypervisor not present [ 4.374590] usbcore: registered new interface driver snd-usb-audio [ 4.381067] u32 classifier [ 4.382467] input device check on [ 4.386222] Actions configured [ 4.389622] Initializing XFRM netlink socket [ 4.394361] NET: Registered protocol family 10 [ 4.400698] Segment Routing with IPv6 [ 4.401751] NET: Registered protocol family 17 [ 4.406340] NET: Registered protocol family 15 [ 4.410467] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.424024] Bluetooth: RFCOMM socket layer initialized [ 4.429008] Bluetooth: RFCOMM ver 1.11 [ 4.432602] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.438862] Bluetooth: HIDP socket layer initialized [ 4.444460] 9pnet: Installing 9P2000 support [ 4.448227] Key type dns_resolver registered [ 4.453137] registered taskstats version 1 [ 4.456328] Loading compiled-in X.509 certificates [ 4.469928] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.472493] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.482088] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.484607] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.492833] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.501537] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.618756] tegra194-pcie 14160000.pcie: Link up [ 4.621638] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.621869] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.622006] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.622255] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.622430] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.622892] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.623322] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.636641] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.637161] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.637678] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.639393] pci 0004:01:00.0: supports D1 D2 [ 4.639540] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.652273] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.652555] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.652771] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.653156] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.653489] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.653646] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.653897] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.660762] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.669665] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.679271] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.683952] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.689716] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.696810] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.706226] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.707475] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.715734] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.724446] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.830850] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.831356] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.831558] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.831757] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.832030] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.832318] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.832703] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.833122] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.857743] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.858053] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.859938] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.860952] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.862287] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.864049] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.864965] pci 0005:00:00.0: Removing from iommu group 7 [ 5.865250] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.905367] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.932844] host1x 13e10000.host1x: initialized [ 5.934595] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.935465] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.936677] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.937391] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.938622] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.939398] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.940565] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.941228] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.942153] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.942870] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.943728] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.947951] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.957690] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.965063] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.974968] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.981777] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.991609] falcon 15340000.vic: Adding to iommu group 17 [ 6.006402] falcon 15340000.vic: initialized [ 6.007554] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.013495] falcon 15380000.nvjpg: initialized [ 6.014450] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.025431] falcon 154c0000.nvenc: initialized [ 6.026131] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.034142] falcon 15a80000.nvenc1: initialized [ 6.034837] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.048299] nvdec 15480000.nvdec: initialized [ 6.049027] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.059103] nvdec 15140000.nvdec1: initialized [ 6.059923] tsec 15500000.tsec: Adding to iommu group 18 [ 6.065643] tsec 15500000.tsec: initialized [ 6.066276] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.072324] tsec 15100000.tsecb: initialized [ 6.076688] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.107475] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.120694] gpio-374 (wifi-enable): hogged as output/high [ 6.120962] gpio-431 (camera-control-output-low): hogged as output/low [ 6.121187] gpio-432 (camera-control-output-low): hogged as output/low [ 6.123388] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.125417] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.125960] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.127472] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.128757] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.134532] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.139866] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.148348] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.155608] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.167328] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.172336] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.178121] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.187013] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.196350] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.203804] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.211228] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.217395] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.226960] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.233074] pva 16000000.pva0: Adding to iommu group 22 [ 6.261129] pva 16000000.pva0: initialized [ 6.265616] pva 16800000.pva1: Adding to iommu group 23 [ 6.277411] pva 16800000.pva1: initialized [ 6.282654] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.296847] nvdla 15880000.nvdla0: initialized [ 6.298525] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.308188] nvdla 158c0000.nvdla1: initialized [ 6.312214] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.312595] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.312772] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.313161] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.313588] tegradccommon 15200000.display-hub: dma mapping done [ 6.313752] tegradc 15200000.display: Adding to iommu group 26 [ 6.313782] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.314026] tegradc 15210000.display: Adding to iommu group 26 [ 6.314465] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.322389] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.323110] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.328917] generic_infoframe_type: 0x87 [ 6.335051] tegra_cec 3960000.tegra_cec: probed [ 6.336441] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.340835] tegradc 15200000.display: DT parsed successfully [ 6.351671] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.355287] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.361453] kfuse 3830000.kfuse: initialized [ 6.371968] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.376480] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.379927] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.388131] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.388883] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.394575] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.395751] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.403744] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.409330] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.410874] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.416990] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.427096] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.430125] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.439325] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.447147] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.457872] tegradc 15210000.display: disp0 connected to head1->sor [ 6.462092] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.468460] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.490878] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.496630] tegradc 15210000.display: DT parsed successfully [ 6.504688] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.504767] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.511900] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.522843] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.557444] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.564449] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.571539] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.578875] usb usb1: Product: xHCI Host Controller [ 6.584105] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.590224] usb usb1: SerialNumber: 3610000.xhci [ 6.590857] random: crng init done [ 6.596260] hub 1-0:1.0: USB hub found [ 6.601983] hub 1-0:1.0: 4 ports detected [ 6.606891] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.611646] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.619417] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.627276] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.634952] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.642196] usb usb2: Product: xHCI Host Controller [ 6.646850] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.653064] usb usb2: SerialNumber: 3610000.xhci [ 6.658769] hub 2-0:1.0: USB hub found [ 6.661813] hub 2-0:1.0: 4 ports detected [ 6.706872] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.713188] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.714889] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.715111] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.728645] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.729720] tegra194-cpufreq ccplex: probed with BWMGR [ 6.731023] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.731482] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.731925] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.733272] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.740452] tegra194-vi5 15c10000.vi: initialized [ 6.742123] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.742378] generic_infoframe_type: 0x87 [ 6.743507] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.746058] tegradc 15200000.display: DT parsed successfully [ 6.748088] mmc0: CQHCI version 5.10 [ 6.752164] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.757726] tegradc 15200000.display: Display dc.000000006f165058 registered with id=0 [ 6.761369] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.769985] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.776976] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.777501] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.784029] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.784034] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.784430] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.792020] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.799916] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.806718] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.814773] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.815403] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.823146] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.830700] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.835663] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.841963] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.849954] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.856941] tegradc 15200000.display: probed [ 6.858736] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.880770] mmc0: Command Queue Engine enabled [ 6.886780] nvethernet 2490000.ethernet: Macsec not supported [ 6.888271] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.894407] mmc0: periodic cache flush enabled [ 6.903676] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.906565] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.913233] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.918394] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.923170] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.931299] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.937095] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.980232] Console: switching to colour frame buffer device 240x67 [ 6.981557] tegra-se-nvhost 15810000.se: initialized [ 6.986160] tegradc 15200000.display: fb registered [ 6.986219] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.996155] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.008689] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.015135] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.015340] tegra-se-nvhost 15820000.se: initialized [ 7.025145] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.027143] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.027307] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.028100] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.028738] tegra-se-nvhost 15830000.se: initialized [ 7.029977] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.030520] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.031550] tegra-se-nvhost 15840000.se: initialized [ 7.056227] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.064414] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.068959] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.068964] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.068968] usb 1-2: Manufacturer: Generic [ 7.100318] hub 1-2:1.0: USB hub found [ 7.106326] tegra_actmon d230000.actmon: in actmon_register()... [ 7.109799] hub 1-2:1.0: 4 ports detected [ 7.114294] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.124489] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.128761] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.132467] hvc_sysfs: hypervisor is not present [ 7.141681] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.153076] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.163643] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.177817] ALSA device list: [ 7.177920] No soundcards found. [ 7.178919] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.181697] Extcon AUX1(HDMI) enable [ 7.185071] tegradc 15210000.display: disp1 connected to head1->sor [ 7.191681] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.198603] tegradc 15210000.display: DT parsed successfully [ 7.204170] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.204580] tegradc 15210000.display: Display dc.000000007851eb04 registered with id=1 [ 7.212860] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.227907] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.232858] usb 2-3: Manufacturer: Generic [ 7.233001] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.243155] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.247547] hub 2-3:1.0: USB hub found [ 7.255160] hub 2-3:1.0: 4 ports detected [ 7.260176] tegradc 15210000.display: probed [ 7.261823] tegradc 15210000.display: fb registered [ 7.269944] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.273859] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.275851] Freeing unused kernel memory: 3968K [ 7.281582] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.291887] tegradc 15210000.display: blank - powerdown [ 7.296720] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.304916] Extcon DP: HPD disabled [ 7.308845] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.315157] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.321015] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.322712] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.330707] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.334907] Run /init as init process ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.344402] tegradc 15200000.display: blank - powerdown [ 7.379182] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.379191] Extcon AUX1(HDMI) disable [ 7.395285] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.395290] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.402540] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.403412] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.415223] tegradc 15200000.display: unblank [ 7.416281] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.416467] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.422683] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.424547] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.428501] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.428505] Extcon AUX1(HDMI) enable [ 7.441304] tegradc 15200000.display: sync windows ret = 247 [ 7.468122] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.469728] Extcon HDMI: HPD enabled [ 7.471157] tegradc 15200000.display: hdmi: plugged [ 7.483978] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.485484] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.487011] usb 1-3: Product: Bluetooth Radio [ 7.488354] usb 1-3: Manufacturer: Realtek [ 7.489653] usb 1-3: SerialNumber: 00e04c000001 [ 7.520869] Root device found: mmcblk0p1 [ 7.524313] Found dev node: /dev/mmcblk0p1 [ 7.560689] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.566135] Rootfs mounted over mmcblk0p1 [ 7.610963] Switching from initrd to actual rootfs [ 7.775784] systemd[1]: System time before build time, advancing clock. [ 7.848022] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.853013] systemd[1]: Detected architecture arm64. [ 7.904623] systemd[1]: Set hostname to . [ 8.080217] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.427016] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.428816] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.434656] systemd[1]: Created slice system-modprobe.slice. [ 8.439475] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.443651] systemd[1]: Created slice User and Session Slice. [ 8.447205] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.451264] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.454524] systemd[1]: Reached target User and Group Name Lookups. [ 8.457686] systemd[1]: Reached target Slices. [ 8.460711] systemd[1]: Reached target Swap. [ 8.464678] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.468255] systemd[1]: Listening on Syslog Socket. [ 8.471831] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.475115] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.479295] systemd[1]: Listening on Journal Audit Socket. [ 8.482821] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.486459] systemd[1]: Listening on Journal Socket. [ 8.491365] systemd[1]: Listening on udev Control Socket. [ 8.495222] systemd[1]: Listening on udev Kernel Socket. [ 8.504557] systemd[1]: Mounting Huge Pages File System... [ 8.513220] systemd[1]: Mounting POSIX Message Queue File System... [ 8.521510] systemd[1]: Mounting RPC Pipe File System... [ 8.530364] systemd[1]: Mounting Kernel Debug File System... [ 8.539003] systemd[1]: Mounting Kernel Trace File System... [ 8.549015] systemd[1]: Starting Journal Service... [ 8.558275] systemd[1]: Starting Set the console keyboard layout... [ 8.566545] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.570068] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.576756] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.585021] systemd[1]: Started Nameserver information manager. [ 8.589804] systemd[1]: Reached target Network (Pre). [ 8.598136] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.600117] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.608231] systemd[1]: Starting Load Kernel Modules... [ 8.616176] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.624304] systemd[1]: Starting udev Coldplug all Devices... [ 8.635157] systemd[1]: Mounted Huge Pages File System. [ 8.638843] systemd[1]: Mounted POSIX Message Queue File System. [ 8.642309] systemd[1]: Mounted RPC Pipe File System. [ 8.646256] systemd[1]: Mounted Kernel Debug File System. [ 8.648274] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.649135] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.649791] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.653510] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.653523] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.653527] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.653714] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.653956] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.654119] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.654127] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.668352] systemd[1]: Mounted Kernel Trace File System. [ 8.675299] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.680917] systemd[1]: nvfb-udev.service: Succeeded. [ 8.685743] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.698235] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.712701] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.714495] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.721262] systemd[1]: Starting Load/Save Random Seed... [ 8.730786] systemd[1]: Starting Create System Users... [ 8.750428] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.750428] [ 8.785419] systemd[1]: Finished Load Kernel Modules. [ 8.792220] systemd[1]: Finished Load/Save Random Seed. [ 8.796425] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.803148] systemd[1]: Mounting Kernel Configuration File System... [ 8.811757] systemd[1]: Started OP-TEE Client Supplicant. [ 8.821914] systemd[1]: Starting Apply Kernel Variables... [ 8.832069] systemd[1]: Finished Set the console keyboard layout. [ 8.836476] systemd[1]: Mounted Kernel Configuration File System. [ 8.849524] systemd[1]: Finished Create System Users. [ 8.858128] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.238723] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.245168] imx219 9-0010: board setup failed [ 10.246424] imx219: probe of 9-0010 failed with error -121 [ 10.273873] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.282870] imx219 10-0010: board setup failed [ 10.284154] imx219: probe of 10-0010 failed with error -121 [ 10.434746] hot-surface-alert cooling state: 0 -> 1 [ 10.707445] using random self ethernet address [ 10.708659] using random host ethernet address [ 12.013988] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.013994] Creating 1 MTD partitions on "spi6.0": [ 12.014005] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.334763] using random self ethernet address [ 12.336443] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.825732] nvidia: loading out-of-tree module taints kernel. [ 58.252383] watchdog: watchdog0: watchdog did not stop! [ 58.711782] Trying to unregister non-registered hwtime source [ 61.768922] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.770446] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.327] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.361] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.035] > DEVICE_PROD: device prod is not initialized. [0002.341] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.341] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.342] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.342] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.343] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.343] I> dram_block larger than 80000000 [0002.346] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.357] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.360] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu ÿâclk_dt_late initialized ÿäAÿânoc_late initialized ÿäuÿâpm_post initialized dbells initialized ÿäg 1ÿâdmce initialized ÿä1ÿâcvc initialized ÿä 03:23:20 UTÿâavfs_clk_mach_post initialized ÿäC 20ÿâavfs_clk_platform_post initialized ÿä22 ÿâcvc_late initialized regulator_post initialized ÿäaarcÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäh64 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.490] I> register 'maxim' power off handle [0003.494] I> virtual i2c enabled [0003.494] I> registered 'maxim,max20024' pmic [0003.495] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.495] I> Boot-device: QSPI [0003.495] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> hdmi cable connected [0003.610] W> set volts not configured for 'vdd-1v0' [0003.616] W> set volts not configured for 'vdd-1v8-hs' [0003.617] I> retrieved tmds range from prod_list_hdmi_soc [0003.622] E> invalid display type [0003.623] E> cannot find any other nvdisp nodes [0003.639] I> edid read success [0003.652] I> edid read success [0003.652] I> width = 640, height = 480, frequency = 25174825 [0003.652] I> width = 1920, height = 1080, frequency = 148500000 [0003.653] I> width = 1280, height = 768, frequency = 79500000 [0003.653] I> width = 1360, height = 768, frequency = 85500000 [0003.654] I> width = 720, height = 480, frequency = 26973026 [0003.658] I> width = 720, height = 576, frequency = 26973026 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.686] I> width = 720, height = 480, frequency = 26973026 [0003.691] I> width = 720, height = 576, frequency = 26973026 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 4096, height = 2160, frequency = 296703296 [0003.726] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.737] I> hdmi_enable, starting HDMI initialisation [0003.742] I> hdmi_enable, HDMI initialisation complete [0003.751] initializing target [0003.752] calling apps_init() [0003.753] starting app kernel_boot_app [0003.754] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000796] Console: colour dummy device 80x25 [ 0.002279] printk: console [tty0] enabled [ 0.002348] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002382] pid_max: default: 32768 minimum: 301 [ 0.002576] LSM: Security Framework initializing [ 0.002635] Yama: becoming mindful. [ 0.002675] SELinux: Initializing. [ 0.002833] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002871] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005632] rcu: Hierarchical SRCU implementation. [ 0.005907] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007233] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007289] DTB Build time: Aug 10 2022 20:31:49 [ 0.010602] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010899] Remapping and enabling EFI services. [ 0.013068] smp: Bringing up secondary CPUs ... [ 0.042464] Detected PIPT I-cache on CPU1 [ 0.042538] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072115] Detected PIPT I-cache on CPU2 [ 0.072265] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101906] Detected PIPT I-cache on CPU3 [ 0.102047] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131801] Detected PIPT I-cache on CPU4 [ 0.131963] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161761] Detected PIPT I-cache on CPU5 [ 0.161908] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162287] smp: Brought up 1 node, 6 CPUs [ 0.162527] SMP: Total of 6 processors activated. [ 0.162587] CPU features: detected: Privileged Access Never [ 0.162608] CPU features: detected: LSE atomic instructions [ 0.162620] CPU features: detected: User Access Override [ 0.162632] CPU features: detected: 32-bit EL0 Support [ 0.162644] CPU features: detected: RAS Extension Support [ 0.162657] CPU features: detected: CRC32 instructions [ 0.162669] CPU features: detected: 32-bit EL1 Support [ 0.235236] CPU: All CPU(s) started at EL2 [ 0.241493] devtmpfs: initialized [ 0.288327] Registered cp15_barrier emulation handler [ 0.288464] Registered setend emulation handler [ 0.288487] KASLR enabled [ 0.288738] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288761] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290035] pinctrl core: initialized pinctrl subsystem [ 0.291073] SMBIOS 3.0.0 present. [ 0.291100] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291701] NET: Registered protocol family 16 [ 0.293709] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.294264] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294968] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295024] audit: initializing netlink subsys (disabled) [ 0.295261] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.295648] thermal_sys: Registered thermal governor 'step_wise' [ 0.295654] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295667] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299092] cpuidle: using governor menu [ 0.299573] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300071] ASID allocator initialised with 32768 entries [ 0.300302] Serial: AMBA PL011 UART driver [ 0.303490] Tegra reboot handler registered. [ 0.375976] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.376075] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.376252] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376290] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376404] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376441] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376561] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.376597] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376704] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376738] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.378874] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.378905] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.378929] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.378951] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.378976] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.378998] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379025] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379048] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379069] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379091] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379112] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379134] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379156] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379177] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379199] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379220] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379242] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.379325] mc-err: mcerr ops are set to t19x [ 0.390045] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390068] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390080] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390091] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397978] ACPI: Interpreter disabled. [ 0.399106] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400250] iommu: Default domain type: Translated [ 0.400308] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400662] SCSI subsystem initialized [ 0.400813] usbcore: registered new interface driver usbfs [ 0.400859] usbcore: registered new interface driver hub [ 0.400897] usbcore: registered new device driver usb [ 0.401299] mc: Linux media interface: v0.10 [ 0.401329] videodev: Linux video capture interface: v2.00 [ 0.401616] pps_core: LinuxPPS API ver. 1 registered [ 0.401628] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401654] PTP clock support registered [ 0.401853] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.402155] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.402266] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.402870] Registered efivars operations [ 0.408292] FPGA manager framework [ 0.408413] Advanced Linux Sound Architecture Driver Initialized. [ 0.408917] Bluetooth: Core ver 2.22 [ 0.408953] NET: Registered protocol family 31 [ 0.408963] Bluetooth: HCI device and connection manager initialized [ 0.408977] Bluetooth: HCI socket layer initialized [ 0.408991] Bluetooth: L2CAP socket layer initialized [ 0.409010] Bluetooth: SCO socket layer initialized [ 0.410392] camchar: rtcpu character device driver loaded [ 0.411126] clocksource: Switched to clocksource arch_sys_counter [ 0.724407] VFS: Disk quotas dquot_6.6.0 [ 0.724478] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.724816] pnp: PnP ACPI: disabled [ 0.735094] la/ptsa driver initialized. [ 0.735263] NET: Registered protocol family 2 [ 0.735456] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.740602] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.740715] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.740960] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.741406] TCP: Hash tables configured (established 65536 bind 65536) [ 0.741545] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.741651] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.741833] NET: Registered protocol family 1 [ 0.742689] RPC: Registered named UNIX socket transport module. [ 0.742722] RPC: Registered udp transport module. [ 0.742745] RPC: Registered tcp transport module. [ 0.742761] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.742786] PCI: CLS 0 bytes, default 64 [ 0.743106] Trying to unpack rootfs image as initramfs... [ 1.015577] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.018767] Freeing initrd memory: 8196K [ 1.023613] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.023644] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.023678] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.024167] kvm [1]: IPA Size Limit: 40 bits [ 1.024699] kvm [1]: vgic interrupt IRQ9 [ 1.025219] kvm [1]: VHE mode initialized successfully [ 1.026794] Initialise system trusted keyrings [ 1.027204] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.033930] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.034888] NFS: Registering the id_resolver key type [ 1.034953] Key type id_resolver registered [ 1.034973] Key type id_legacy registered [ 1.035100] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.035170] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.035211] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.045778] NET: Registered protocol family 38 [ 1.045805] Key type asymmetric registered [ 1.045821] Asymmetric key parser 'x509' registered [ 1.045876] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.046196] io scheduler mq-deadline registered [ 1.046222] io scheduler kyber registered [ 1.053152] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.056599] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.056708] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.056779] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.056847] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.056924] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.063602] scrncapt: init (heads:4 wins:6 planes:4) [ 1.063854] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.064898] EINJ: ACPI disabled. [ 1.068821] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.068846] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.068860] tegra-pmc: ### PMC reset level: L1 [ 1.068873] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.068940] tegra-pmc: PMC Prod config success [ 1.074789] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.080606] random: fast init done [ 1.081180] printk: console [ttyTCU0] enabled [ 2.633019] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.637112] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.641699] arm-smmu 10000000.iommu: stage 1 translation [ 2.647602] arm-smmu 10000000.iommu: stage 2 translation [ 2.652941] arm-smmu 10000000.iommu: nested translation [ 2.658016] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.665188] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.677205] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.678286] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.684879] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.692969] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.697921] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.702637] arm-smmu 12000000.iommu: stage 1 translation [ 2.708404] arm-smmu 12000000.iommu: stage 2 translation [ 2.713570] arm-smmu 12000000.iommu: nested translation [ 2.719259] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.726436] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.738227] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.739556] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.745860] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.753612] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.763812] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.766350] tegra_profiler: auth: init [ 2.770835] THERMAL EST: found 3 subdevs [ 2.774226] THERMAL EST num_resources: 0 [ 2.777796] [THERMAL EST subdev 0] [ 2.781377] [THERMAL EST subdev 1] [ 2.784540] [THERMAL EST subdev 2] [ 2.788034] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.794499] THERMAL EST: thz register success. [ 2.798476] THERMAL EST: end of probe, return err: 0 [ 2.804081] nvsciipc: loaded module [ 2.811475] tun: Universal TUN/TAP device driver, 1.6 [ 2.813278] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.819553] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.825123] e1000e: Intel(R) PRO/1000 Network Driver [ 2.830289] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.836146] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.841667] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.847920] PPP generic driver version 2.4.2 [ 2.851892] PPP BSD Compression module registered [ 2.856648] PPP Deflate Compression module registered [ 2.861915] PPP MPPE Compression module registered [ 2.866683] usbcore: registered new interface driver r8152 [ 2.872416] usbcore: registered new interface driver asix [ 2.877745] usbcore: registered new interface driver ax88179_178a [ 2.883645] usbcore: registered new interface driver cdc_ether [ 2.889849] usbcore: registered new interface driver net1080 [ 2.895184] usbcore: registered new interface driver cdc_subset [ 2.901490] usbcore: registered new interface driver zaurus [ 2.907175] usbcore: registered new interface driver cdc_ncm [ 2.912588] usbcore: registered new interface driver aqc111 [ 2.918466] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.924294] ohci-pci: OHCI PCI platform driver [ 2.928595] ohci-platform: OHCI generic platform driver [ 2.934583] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.941102] usbcore: registered new interface driver uas [ 2.944899] usbcore: registered new interface driver usb-storage [ 2.951324] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.957405] mousedev: PS/2 mouse device common for all mice [ 2.962064] usbcore: registered new interface driver xpad [ 2.970418] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.972818] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.980845] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.987437] i2c /dev entries driver [ 2.990690] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.996288] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.001809] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.006979] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.012590] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.018069] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.023491] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.037076] device-mapper: uevent: version 1.0.3 [ 3.037538] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.044093] cpuidle: Initializing cpuidle driver [ 3.047761] sdhci: Secure Digital Host Controller Interface driver [ 3.052392] sdhci: Copyright(c) Pierre Ossman [ 3.056745] Synopsys Designware Multimedia Card Interface Driver [ 3.062682] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.068653] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.069423] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.081918] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.103332] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.113359] vdd-1v0: supplied by regulator-dummy [ 3.119010] vdd-1v8-hs: supplied by regulator-dummy [ 3.123982] vdd-1v8-ls: supplied by regulator-dummy [ 3.128905] vdd-1v8-ao: supplied by regulator-dummy [ 3.132946] vddio-ddr-1v1: supplied by regulator-dummy [ 3.137511] vdd-rtc: supplied by regulator-dummy [ 3.139436] spmic-ldo1: supplied by regulator-dummy [ 3.140683] vdd-ao-3v3: supplied by regulator-dummy [ 3.146919] vddio-emmc-3v3: supplied by regulator-dummy [ 3.153622] spmic-ldo4: supplied by regulator-dummy [ 3.154928] vdd-usb-3v3: supplied by regulator-dummy [ 3.161229] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.167515] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.173206] spmic-ldo8: supplied by vdd-1v8-ls [ 3.174796] gpio-510 (gpio_default): hogged as output/high [ 3.176182] gpio-511 (gpio_default): hogged as output/high [ 3.179097] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.314888] max77686-rtc max77620-rtc: registered as rtc0 [ 3.315998] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.316378] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.158681] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.159792] hid: raw HID events driver (C) Jiri Kosina [ 4.160659] usbcore: registered new interface driver usbhid [ 4.160806] usbhid: USB HID core driver [ 4.162910] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.164277] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.253960] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.328353] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.202 ms) ÿá[ 4.248894] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.249445] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.250464] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.251253] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.252921] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.253647] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.254162] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.255701] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.255996] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.258781] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.265894] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.271737] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.276800] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.282728] denver_knobs_init:MTS_VERSION:55637613 [ 4.298351] t19x_cache tegra-cache: probed [ 4.301546] optee: probing for conduit method. [ 4.302467] optee: revision 3.16 (65cc2218) [ 4.303545] optee: dynamic shared memory is enabled [ 4.304927] optee: initialized driver [ 4.310884] nvpmodel: initialized successfully [ 4.311890] tegra_hv: get_hvd: not initialized yet [ 4.315736] user_ivc_mempool: hypervisor not present [ 4.322088] usbcore: registered new interface driver snd-usb-audio [ 4.328169] u32 classifier [ 4.329492] input device check on [ 4.333205] Actions configured [ 4.337094] Initializing XFRM netlink socket [ 4.341959] NET: Registered protocol family 10 [ 4.348000] Segment Routing with IPv6 [ 4.349079] NET: Registered protocol family 17 [ 4.353625] NET: Registered protocol family 15 [ 4.357770] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.371225] Bluetooth: RFCOMM socket layer initialized [ 4.376049] Bluetooth: RFCOMM ver 1.11 [ 4.380199] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.386047] Bluetooth: HIDP socket layer initialized [ 4.391694] 9pnet: Installing 9P2000 support [ 4.395236] Key type dns_resolver registered [ 4.400912] registered taskstats version 1 [ 4.403936] Loading compiled-in X.509 certificates [ 4.417461] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.419650] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.429491] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.431889] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.440166] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.448915] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.563186] tegra194-pcie 14160000.pcie: Link up [ 4.566199] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.566451] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.566669] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.566896] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.567073] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.567532] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.567995] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.580136] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.580723] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.581216] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.582713] pci 0004:01:00.0: supports D1 D2 [ 4.582866] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.593355] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.593629] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.593896] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.594319] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.594613] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.594824] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.597874] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.605227] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.613938] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.624354] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.628508] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.634809] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.641492] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.650855] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.651746] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.660500] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.668846] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.771318] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.771843] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.772061] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.772304] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.772677] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.772921] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.773382] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.773863] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.800815] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.801173] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.803456] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.804874] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.806230] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.808075] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.809095] pci 0005:00:00.0: Removing from iommu group 7 [ 5.809461] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.844312] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.869731] host1x 13e10000.host1x: initialized [ 5.871525] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.872459] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.873731] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.874410] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.875835] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.876497] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.877674] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.878565] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.880000] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.880677] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.881670] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.888618] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.898633] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.905251] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.915541] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.922277] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.932194] falcon 15340000.vic: Adding to iommu group 17 [ 5.947438] falcon 15340000.vic: initialized [ 5.948467] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.954406] falcon 15380000.nvjpg: initialized [ 5.955066] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.965610] falcon 154c0000.nvenc: initialized [ 5.966344] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.975689] falcon 15a80000.nvenc1: initialized [ 5.976476] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.988758] nvdec 15480000.nvdec: initialized [ 5.989438] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.999206] nvdec 15140000.nvdec1: initialized [ 5.999935] tsec 15500000.tsec: Adding to iommu group 18 [ 6.005768] tsec 15500000.tsec: initialized [ 6.006353] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.012553] tsec 15100000.tsecb: initialized [ 6.016752] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.047480] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.060947] gpio-374 (wifi-enable): hogged as output/high [ 6.061367] gpio-431 (camera-control-output-low): hogged as output/low [ 6.061670] gpio-432 (camera-control-output-low): hogged as output/low [ 6.063603] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.065680] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.066270] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.068028] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.069320] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.074721] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.080373] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.088850] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.096122] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.107593] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.112564] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.118659] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.127470] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.136762] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.144185] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.151326] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.157796] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.167341] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.173684] pva 16000000.pva0: Adding to iommu group 22 [ 6.200498] pva 16000000.pva0: initialized [ 6.205899] pva 16800000.pva1: Adding to iommu group 23 [ 6.217886] pva 16800000.pva1: initialized [ 6.222093] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.235214] nvdla 15880000.nvdla0: initialized [ 6.236525] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.244909] nvdla 158c0000.nvdla1: initialized [ 6.249562] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.249892] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.250256] tegradccommon 15200000.display-hub: dma mapping done [ 6.250483] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.250503] tegradc 15200000.display: Adding to iommu group 26 [ 6.251249] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.252066] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.258061] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.259001] tegradc 15210000.display: Adding to iommu group 26 [ 6.259347] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.259490] generic_infoframe_type: 0x87 [ 6.259591] tegradc 15200000.display: DT parsed successfully [ 6.259694] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.263339] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.263965] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.263978] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.263983] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.264931] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.264942] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.266082] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.268373] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.269195] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.275349] tegra_cec 3960000.tegra_cec: probed [ 6.281223] tegradc 15210000.display: disp0 connected to head1->sor [ 6.286398] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.293115] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.302019] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.307496] tegradc 15210000.display: DT parsed successfully [ 6.315727] kfuse 3830000.kfuse: initialized [ 6.323550] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.409575] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.415281] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.422719] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.428824] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.438303] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.443524] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.452534] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.458363] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.479011] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.479527] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.481165] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.489352] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.498096] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.504680] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.512518] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.519632] usb usb1: Product: xHCI Host Controller [ 6.524605] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.530912] usb usb1: SerialNumber: 3610000.xhci [ 6.536612] hub 1-0:1.0: USB hub found [ 6.539263] hub 1-0:1.0: 4 ports detected [ 6.543808] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.548601] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.556480] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.564192] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.572054] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.579038] usb usb2: Product: xHCI Host Controller [ 6.584021] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.590487] usb usb2: SerialNumber: 3610000.xhci [ 6.595980] hub 2-0:1.0: USB hub found [ 6.598959] hub 2-0:1.0: 4 ports detected [ 6.643508] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.649805] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.651464] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.651664] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.665180] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.666200] tegra194-cpufreq ccplex: probed with BWMGR [ 6.667437] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.667948] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.668390] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.669534] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.677109] mmc0: CQHCI version 5.10 [ 6.677140] tegra194-vi5 15c10000.vi: initialized [ 6.678787] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.679736] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.682568] generic_infoframe_type: 0x87 [ 6.689245] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.693175] tegradc 15200000.display: DT parsed successfully [ 6.701111] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.701129] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.706660] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.713164] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.720989] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.727688] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.735179] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.742641] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.742650] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.746709] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.749029] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.749035] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.793945] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.793984] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.799184] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.811250] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.813051] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.819556] nvethernet 2490000.ethernet: Macsec not supported [ 6.820988] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.831786] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.837513] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.844320] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.846320] tegradc 15200000.display: probed [ 6.852378] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.876743] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.884916] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.892175] tegra-se-nvhost 15810000.se: initialized [ 6.899649] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.901122] mmc0: Command Queue Engine enabled [ 6.901158] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.905394] mmc0: periodic cache flush enabled [ 6.905411] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.912261] tegra-se-nvhost 15820000.se: initialized [ 6.916296] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.924223] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.927485] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.932427] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.949580] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.952574] tegra-se-nvhost 15830000.se: initialized [ 6.964934] Console: switching to colour frame buffer device 240x67 [ 6.965600] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.970852] tegradc 15200000.display: fb registered [ 6.970915] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.977347] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.978744] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.978775] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.978781] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.978785] usb 1-2: Manufacturer: Generic [ 6.980687] hub 1-2:1.0: USB hub found [ 6.981909] hub 1-2:1.0: 4 ports detected [ 6.982757] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.988443] tegra-se-nvhost 15840000.se: initialized [ 6.993822] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.003487] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.050842] tegra_actmon d230000.actmon: in actmon_register()... [ 7.055228] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.061001] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.065938] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.068929] hvc_sysfs: hypervisor is not present [ 7.077683] random: crng init done [ 7.085712] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.092570] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.108116] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.113234] ALSA device list: [ 7.113317] No soundcards found. [ 7.114358] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.121792] Extcon AUX1(HDMI) enable [ 7.121891] tegradc 15210000.display: disp1 connected to head1->sor [ 7.132181] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.139107] tegradc 15210000.display: DT parsed successfully [ 7.144737] tegradc 15210000.display: Display dc.000000007fdb5bd8 registered with id=1 [ 7.144753] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.153195] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.161069] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.167539] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.174632] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.185758] usb 2-3: Manufacturer: Generic [ 7.187839] tegradc 15210000.display: probed [ 7.194183] tegradc 15210000.display: fb registered [ 7.200563] hub 2-3:1.0: USB hub found [ 7.202583] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.205015] Freeing unused kernel memory: 3968K [ 7.205197] hub 2-3:1.0: 4 ports detected [ 7.210501] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.210512] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.232148] tegradc 15210000.display: blank - powerdown [ 7.237460] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.245672] Extcon DP: HPD disabled [ 7.249285] hpd: switching from state 0 (Reset) to state 1 (Check Plug) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.255918] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.255942] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.256000] tegradc 15200000.display: blank - powerdown [ 7.263189] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.263222] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.263282] Run /init as init process [ 7.299646] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.299651] Extcon AUX1(HDMI) disable [ 7.323093] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.323963] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.327755] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.327761] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.337076] tegradc 15200000.display: unblank [ 7.338135] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.338330] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.344127] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.345966] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.349971] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.349975] Extcon AUX1(HDMI) enable [ 7.362749] tegradc 15200000.display: sync windows ret = 247 [ 7.395403] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.399464] Extcon HDMI: HPD enabled [ 7.403136] tegradc 15200000.display: hdmi: plugged [ 7.412384] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.416299] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.423631] usb 1-3: Product: Bluetooth Radio [ 7.427833] usb 1-3: Manufacturer: Realtek [ 7.432023] usb 1-3: SerialNumber: 00e04c000001 [ 7.448634] Root device found: mmcblk0p1 [ 7.451934] Found dev node: /dev/mmcblk0p1 [ 7.488126] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.493309] Rootfs mounted over mmcblk0p1 [ 7.529986] Switching from initrd to actual rootfs [ 7.679324] systemd[1]: System time before build time, advancing clock. [ 7.748382] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.753376] systemd[1]: Detected architecture arm64. [ 7.794334] systemd[1]: Set hostname to . [ 7.962061] systemd-sysv-generator[244]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.306038] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.309051] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.316439] systemd[1]: Created slice system-modprobe.slice. [ 8.321047] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.325199] systemd[1]: Created slice User and Session Slice. [ 8.328676] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.332913] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.336279] systemd[1]: Reached target User and Group Name Lookups. [ 8.339523] systemd[1]: Reached target Slices. [ 8.342617] systemd[1]: Reached target Swap. [ 8.346596] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.350293] systemd[1]: Listening on Syslog Socket. [ 8.353915] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.357344] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.361595] systemd[1]: Listening on Journal Audit Socket. [ 8.366701] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.372035] systemd[1]: Listening on Journal Socket. [ 8.375838] systemd[1]: Listening on udev Control Socket. [ 8.379411] systemd[1]: Listening on udev Kernel Socket. [ 8.387651] systemd[1]: Mounting Huge Pages File System... [ 8.396073] systemd[1]: Mounting POSIX Message Queue File System... [ 8.404016] systemd[1]: Mounting RPC Pipe File System... [ 8.412677] systemd[1]: Mounting Kernel Debug File System... [ 8.421070] systemd[1]: Mounting Kernel Trace File System... [ 8.431032] systemd[1]: Starting Journal Service... [ 8.439847] systemd[1]: Starting Set the console keyboard layout... [ 8.447923] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.451534] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.458155] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.466165] systemd[1]: Started Nameserver information manager. [ 8.470556] systemd[1]: Reached target Network (Pre). [ 8.477796] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.479778] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.486177] systemd[1]: Starting Load Kernel Modules... [ 8.495732] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.503512] systemd[1]: Starting udev Coldplug all Devices... [ 8.514290] systemd[1]: Mounted Huge Pages File System. [ 8.518220] systemd[1]: Mounted POSIX Message Queue File System. [ 8.521995] systemd[1]: Mounted RPC Pipe File System. [ 8.526867] systemd[1]: Mounted Kernel Debug File System. [ 8.529736] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.530542] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.533013] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.533036] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.533041] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.533799] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.542262] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.542276] systemd[1]: Mounted Kernel Trace File System. [ 8.543911] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.547467] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.547483] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.556530] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.561353] systemd[1]: nvfb-udev.service: Succeeded. [ 8.565521] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.578003] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.583290] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.585272] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.600234] systemd[1]: Starting Load/Save Random Seed... [ 8.608673] systemd[1]: Starting Create System Users... [ 8.646800] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.646800] [ 8.660758] systemd[1]: Finished Load/Save Random Seed. [ 8.676262] systemd[1]: Finished Load Kernel Modules. [ 8.687406] systemd[1]: Finished Create System Users. [ 8.691859] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.698126] systemd[1]: Mounting Kernel Configuration File System... [ 8.705626] systemd[1]: Started OP-TEE Client Supplicant. [ 8.714190] systemd[1]: Starting Apply Kernel Variables... [ 8.724255] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.734427] systemd[1]: Finished Set the console keyboard layout. [ 8.738666] systemd[1]: Mounted Kernel Configuration File System. [ 10.177305] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.177843] hot-surface-alert cooling state: 0 -> 1 [ 10.182757] imx219 9-0010: board setup failed [ 10.184467] imx219: probe of 9-0010 failed with error -121 [ 10.197555] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.202765] imx219 10-0010: board setup failed [ 10.204593] imx219: probe of 10-0010 failed with error -121 [ 10.776392] using random self ethernet address [ 10.778159] using random host ethernet address [ 12.011943] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.013613] Creating 1 MTD partitions on "spi6.0": [ 12.015410] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.263683] using random self ethernet address [ 12.265308] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 34.786126] nvidia: loading out-of-tree module taints kernel. [ 59.277129] watchdog: watchdog0: watchdog did not stop! [ 59.752157] Trying to unregister non-registered hwtime source [ 62.817617] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.819182] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR]àÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.205] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.206] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.213] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.222] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.271] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.280] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.329] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.338] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.387] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.396] GIC-SPI Target CPU: 0 [0003.399] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.429] initializing platform [0003.432] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.466] I> fixed regulator driver initialized [0003.479] I> register 'maxim' power off handle [0003.482] I> virtual i2c enabled [0003.482] I> registered 'maxim,max20024' pmic [0003.482] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.486] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.493] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.530] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.643] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.644] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.688] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.717] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.733] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.743] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000666] Console: colour dummy device 80x25 [ 0.002136] printk: console [tty0] enabled [ 0.002195] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002231] pid_max: default: 32768 minimum: 301 [ 0.002408] LSM: Security Framework initializing [ 0.002464] Yama: becoming mindful. [ 0.002510] SELinux: Initializing. [ 0.002665] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002704] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005424] rcu: Hierarchical SRCU implementation. [ 0.005731] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006420] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006470] DTB Build time: Aug 10 2022 20:31:49 [ 0.009157] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009435] Remapping and enabling EFI services. [ 0.011749] smp: Bringing up secondary CPUs ... [ 0.041500] Detected PIPT I-cache on CPU1 [ 0.041613] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072673] Detected PIPT I-cache on CPU2 [ 0.072821] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102437] Detected PIPT I-cache on CPU3 [ 0.102574] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132328] Detected PIPT I-cache on CPU4 [ 0.132426] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162313] Detected PIPT I-cache on CPU5 [ 0.162416] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162790] smp: Brought up 1 node, 6 CPUs [ 0.162962] SMP: Total of 6 processors activated. [ 0.163005] CPU features: detected: Privileged Access Never [ 0.163027] CPU features: detected: LSE atomic instructions [ 0.163040] CPU features: detected: User Access Override [ 0.163053] CPU features: detected: 32-bit EL0 Support [ 0.163065] CPU features: detected: RAS Extension Support [ 0.163076] CPU features: detected: CRC32 instructions [ 0.163089] CPU features: detected: 32-bit EL1 Support [ 0.231269] CPU: All CPU(s) started at EL2 [ 0.237341] devtmpfs: initialized [ 0.304187] Registered cp15_barrier emulation handler [ 0.304331] Registered setend emulation handler [ 0.304368] KASLR enabled [ 0.304671] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.304707] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.306766] pinctrl core: initialized pinctrl subsystem [ 0.308225] SMBIOS 3.0.0 present. [ 0.308277] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.309158] NET: Registered protocol family 16 [ 0.311915] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.312665] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.313718] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.313853] audit: initializing netlink subsys (disabled) [ 0.314222] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1 [ 0.314901] thermal_sys: Registered thermal governor 'step_wise' [ 0.314910] thermal_sys: Registered thermal governor 'power_allocator' [ 0.314933] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.318360] cpuidle: using governor menu [ 0.318921] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.319410] ASID allocator initialised with 32768 entries [ 0.319759] Serial: AMBA PL011 UART driver [ 0.325197] Tegra reboot handler registered. [ 0.414813] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.414957] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.415240] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.415299] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.415540] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.415600] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.415794] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.415855] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.416031] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.416086] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.419651] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.419701] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.419740] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.419778] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.419818] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.419856] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.419930] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.419977] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.420031] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.420065] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.420117] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.420152] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.420185] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.420217] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.420249] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.420281] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.420313] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.420442] mc-err: mcerr ops are set to t19x [ 0.436357] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.436393] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.436415] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.436466] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.444648] ACPI: Interpreter disabled. [ 0.446241] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.448177] iommu: Default domain type: Translated [ 0.448260] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.448870] SCSI subsystem initialized [ 0.449125] usbcore: registered new interface driver usbfs [ 0.449182] usbcore: registered new interface driver hub [ 0.449227] usbcore: registered new device driver usb [ 0.449785] mc: Linux media interface: v0.10 [ 0.449843] videodev: Linux video capture interface: v2.00 [ 0.450330] pps_core: LinuxPPS API ver. 1 registered [ 0.450348] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.450402] PTP clock support registered [ 0.450681] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.451042] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.451130] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.451926] Registered efivars operations [ 0.457811] FPGA manager framework [ 0.457944] Advanced Linux Sound Architecture Driver Initialized. [ 0.458755] Bluetooth: Core ver 2.22 [ 0.458804] NET: Registered protocol family 31 [ 0.458820] Bluetooth: HCI device and connection manager initialized [ 0.458841] Bluetooth: HCI socket layer initialized [ 0.458859] Bluetooth: L2CAP socket layer initialized [ 0.458886] Bluetooth: SCO socket layer initialized [ 0.460587] camchar: rtcpu character device driver loaded [ 0.461477] clocksource: Switched to clocksource arch_sys_counter [ 0.864821] VFS: Disk quotas dquot_6.6.0 [ 0.864951] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.865378] pnp: PnP ACPI: disabled [ 0.878398] la/ptsa driver initialized. [ 0.878598] NET: Registered protocol family 2 [ 0.878837] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.887243] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.887443] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.887822] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.888460] TCP: Hash tables configured (established 65536 bind 65536) [ 0.888669] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.888801] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.889129] NET: Registered protocol family 1 [ 0.890089] RPC: Registered named UNIX socket transport module. [ 0.890124] RPC: Registered udp transport module. [ 0.890138] RPC: Registered tcp transport module. [ 0.890152] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.890178] PCI: CLS 0 bytes, default 64 [ 0.890457] Trying to unpack rootfs image as initramfs... [ 1.153415] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.156675] Freeing initrd memory: 8196K [ 1.160884] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.160918] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.160953] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.161260] kvm [1]: IPA Size Limit: 40 bits [ 1.161740] kvm [1]: vgic interrupt IRQ9 [ 1.162212] kvm [1]: VHE mode initialized successfully [ 1.163517] Initialise system trusted keyrings [ 1.163789] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.169032] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.169903] NFS: Registering the id_resolver key type [ 1.169938] Key type id_resolver registered [ 1.169953] Key type id_legacy registered [ 1.170036] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.170060] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.170103] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.179604] NET: Registered protocol family 38 [ 1.179631] Key type asymmetric registered [ 1.179646] Asymmetric key parser 'x509' registered [ 1.179700] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.179915] io scheduler mq-deadline registered [ 1.179933] io scheduler kyber registered [ 1.185412] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.188354] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.188444] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.188512] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.188600] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.188669] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.194145] scrncapt: init (heads:4 wins:6 planes:4) [ 1.194201] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.195266] EINJ: ACPI disabled. [ 1.198718] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.198742] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.198757] tegra-pmc: ### PMC reset level: L1 [ 1.198770] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.198856] tegra-pmc: PMC Prod config success [ 1.203659] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.208607] random: fast init done [ 1.209228] printk: console [ttyTCU0] enabled [ 2.761128] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.765728] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.770193] arm-smmu 10000000.iommu: stage 1 translation [ 2.775703] arm-smmu 10000000.iommu: stage 2 translation [ 2.780926] arm-smmu 10000000.iommu: nested translation [ 2.786273] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.793445] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.804064] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.806571] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.813384] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.821225] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.826439] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.831184] arm-smmu 12000000.iommu: stage 1 translation [ 2.836427] arm-smmu 12000000.iommu: stage 2 translation [ 2.842084] arm-smmu 12000000.iommu: nested translation [ 2.847257] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.854517] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.865215] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.867558] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.874370] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.881900] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.891158] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.894518] tegra_profiler: auth: init [ 2.899046] THERMAL EST: found 3 subdevs [ 2.902212] THERMAL EST num_resources: 0 [ 2.906310] [THERMAL EST subdev 0] [ 2.909359] [THERMAL EST subdev 1] [ 2.913047] [THERMAL EST subdev 2] [ 2.916037] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.922773] THERMAL EST: thz register success. [ 2.926990] THERMAL EST: end of probe, return err: 0 [ 2.932078] nvsciipc: loaded module [ 2.939078] tun: Universal TUN/TAP device driver, 1.6 [ 2.941876] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.948059] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.953353] e1000e: Intel(R) PRO/1000 Network Driver [ 2.958294] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.964363] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.969921] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.976078] PPP generic driver version 2.4.2 [ 2.980112] PPP BSD Compression module registered [ 2.984901] PPP Deflate Compression module registered [ 2.990146] PPP MPPE Compression module registered [ 2.994902] usbcore: registered new interface driver r8152 [ 3.000663] usbcore: registered new interface driver asix [ 3.005754] usbcore: registered new interface driver ax88179_178a [ 3.012163] usbcore: registered new interface driver cdc_ether [ 3.017856] usbcore: registered new interface driver net1080 [ 3.023469] usbcore: registered new interface driver cdc_subset [ 3.029456] usbcore: registered new interface driver zaurus [ 3.035186] usbcore: registered new interface driver cdc_ncm [ 3.040849] usbcore: registered new interface driver aqc111 [ 3.046579] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.052553] ohci-pci: OHCI PCI platform driver [ 3.056872] ohci-platform: OHCI generic platform driver [ 3.062737] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.068942] usbcore: registered new interface driver uas [ 3.073145] usbcore: registered new interface driver usb-storage [ 3.079534] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.085680] mousedev: PS/2 mouse device common for all mice [ 3.090294] usbcore: registered new interface driver xpad [ 3.098521] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.101265] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.109092] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.115606] i2c /dev entries driver [ 3.118750] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.124492] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.129968] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.135432] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.140828] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.146308] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.151713] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.164887] device-mapper: uevent: version 1.0.3 [ 3.165335] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.172021] cpuidle: Initializing cpuidle driver [ 3.176000] sdhci: Secure Digital Host Controller Interface driver [ 3.180630] sdhci: Copyright(c) Pierre Ossman [ 3.184729] Synopsys Designware Multimedia Card Interface Driver [ 3.190934] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.196815] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.197532] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.210149] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.226073] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.235368] vdd-1v0: supplied by regulator-dummy [ 3.240764] vdd-1v8-hs: supplied by regulator-dummy [ 3.245361] vdd-1v8-ls: supplied by regulator-dummy [ 3.250056] vdd-1v8-ao: supplied by regulator-dummy [ 3.253788] vddio-ddr-1v1: supplied by regulator-dummy [ 3.258041] vdd-rtc: supplied by regulator-dummy [ 3.259647] spmic-ldo1: supplied by regulator-dummy [ 3.260742] vdd-ao-3v3: supplied by regulator-dummy [ 3.266736] vddio-emmc-3v3: supplied by regulator-dummy [ 3.272847] spmic-ldo4: supplied by regulator-dummy [ 3.273957] vdd-usb-3v3: supplied by regulator-dummy [ 3.281946] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.288011] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.293366] spmic-ldo8: supplied by vdd-1v8-ls [ 3.294772] gpio-510 (gpio_default): hogged as output/high [ 3.296877] gpio-511 (gpio_default): hogged as output/high [ 3.304025] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.442765] max77686-rtc max77620-rtc: registered as rtc0 [ 3.444023] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.444316] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.143865] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.144778] hid: raw HID events driver (C) Jiri Kosina [ 4.145412] usbcore: registered new interface driver usbhid [ 4.145572] usbhid: USB HID core driver [ 4.147358] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.148460] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.155678] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.231244] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.375 ms) ÿá[ 4.233885] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.234462] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.235365] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.236046] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.237766] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.238344] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.238844] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.239788] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.240001] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.241716] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.249664] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.256401] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.261380] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.267811] denver_knobs_init:MTS_VERSION:55637613 [ 4.280681] t19x_cache tegra-cache: probed [ 4.282969] optee: probing for conduit method. [ 4.283766] optee: revision 3.16 (65cc2218) [ 4.284506] optee: dynamic shared memory is enabled [ 4.288606] optee: initialized driver [ 4.294894] nvpmodel: initialized successfully [ 4.296466] tegra_hv: get_hvd: not initialized yet [ 4.301182] user_ivc_mempool: hypervisor not present [ 4.307014] usbcore: registered new interface driver snd-usb-audio [ 4.313577] u32 classifier [ 4.314928] input device check on [ 4.318530] Actions configured [ 4.322344] Initializing XFRM netlink socket [ 4.327207] NET: Registered protocol family 10 [ 4.333932] Segment Routing with IPv6 [ 4.334290] NET: Registered protocol family 17 [ 4.338557] NET: Registered protocol family 15 [ 4.342977] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.356364] Bluetooth: RFCOMM socket layer initialized [ 4.361525] Bluetooth: RFCOMM ver 1.11 [ 4.365092] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.370984] Bluetooth: HIDP socket layer initialized [ 4.376951] 9pnet: Installing 9P2000 support [ 4.380658] Key type dns_resolver registered [ 4.386027] registered taskstats version 1 [ 4.389071] Loading compiled-in X.509 certificates [ 4.401756] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.404579] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.415075] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.416821] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.425716] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.433756] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.549552] tegra194-pcie 14160000.pcie: Link up [ 4.552335] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.552548] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.552703] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.552944] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.553138] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.553532] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.553961] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.564114] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.564633] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.565094] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.566687] pci 0004:01:00.0: supports D1 D2 [ 4.566842] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.575721] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.576128] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.576381] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.576806] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.577100] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.578309] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.584119] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.591777] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.600295] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.610487] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.614727] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.620801] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.627584] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.635908] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.638334] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.646614] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.655148] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.770015] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.770636] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.770839] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.770986] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.771254] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.771500] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.771881] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.772330] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.788439] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.788800] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.790891] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.792190] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.794028] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.795740] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.796581] pci 0005:00:00.0: Removing from iommu group 7 [ 5.796834] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.827056] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.847130] host1x 13e10000.host1x: initialized [ 5.848767] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.849709] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.850892] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.851599] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.852708] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.853265] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.854399] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.855072] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.863347] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.869885] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.879954] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.887198] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.896945] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.903980] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.913825] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.921125] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.930702] falcon 15340000.vic: Adding to iommu group 17 [ 5.944865] falcon 15340000.vic: initialized [ 5.946012] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.951105] falcon 15380000.nvjpg: initialized [ 5.951696] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.963855] falcon 154c0000.nvenc: initialized [ 5.964518] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.974271] falcon 15a80000.nvenc1: initialized [ 5.974973] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.986139] nvdec 15480000.nvdec: initialized [ 5.986711] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.996611] nvdec 15140000.nvdec1: initialized [ 5.997242] tsec 15500000.tsec: Adding to iommu group 18 [ 6.002869] tsec 15500000.tsec: initialized [ 6.003525] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.011458] tsec 15100000.tsecb: initialized [ 6.015120] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.038239] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.048935] gpio-374 (wifi-enable): hogged as output/high [ 6.049228] gpio-431 (camera-control-output-low): hogged as output/low [ 6.049616] gpio-432 (camera-control-output-low): hogged as output/low [ 6.050991] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.052257] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.055679] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.061985] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.067702] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.073584] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.078943] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.087097] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.094658] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.105812] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.111108] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.117087] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.125935] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.135081] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.142398] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.150217] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.156265] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.165980] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.172130] pva 16000000.pva0: Adding to iommu group 22 [ 6.199501] pva 16000000.pva0: initialized [ 6.204500] pva 16800000.pva1: Adding to iommu group 23 [ 6.215315] pva 16800000.pva1: initialized [ 6.220245] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.232183] nvdla 15880000.nvdla0: initialized [ 6.233596] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.242324] nvdla 158c0000.nvdla1: initialized [ 6.244589] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.244843] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.245135] tegradccommon 15200000.display-hub: dma mapping done [ 6.247075] tegradc 15200000.display: Adding to iommu group 26 [ 6.254882] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.255339] generic_infoframe_type: 0x87 [ 6.255594] tegradc 15200000.display: DT parsed successfully [ 6.255881] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.261808] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.263795] tegradc 15210000.display: Adding to iommu group 26 [ 6.268333] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.281355] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.285673] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.286466] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.294347] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.299898] tegra_cec 3960000.tegra_cec: probed [ 6.300545] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.307894] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.318821] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.326841] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.332405] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.344722] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.346034] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.362948] kfuse 3830000.kfuse: initialized [ 6.367484] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.367749] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.379956] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.380147] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.387282] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.395954] tegradc 15210000.display: disp0 connected to head1->sor [ 6.400468] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.406140] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.416111] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.422084] tegradc 15210000.display: DT parsed successfully [ 6.428417] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.433245] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.451321] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.456509] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.476112] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.476447] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.479786] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.488233] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.496725] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.503504] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.510822] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.518088] usb usb1: Product: xHCI Host Controller [ 6.523009] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.529600] usb usb1: SerialNumber: 3610000.xhci [ 6.534872] hub 1-0:1.0: USB hub found [ 6.538176] hub 1-0:1.0: 4 ports detected [ 6.542426] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.547329] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.555212] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.562947] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.570733] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.578000] usb usb2: Product: xHCI Host Controller [ 6.582685] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.588930] usb usb2: SerialNumber: 3610000.xhci [ 6.594662] hub 2-0:1.0: USB hub found [ 6.597705] hub 2-0:1.0: 4 ports detected [ 6.636090] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.641293] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.642365] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.642549] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.655294] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.656290] tegra194-cpufreq ccplex: probed with BWMGR [ 6.657364] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.658054] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.658485] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.659678] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.672227] tegra194-vi5 15c10000.vi: initialized [ 6.672809] mmc0: CQHCI version 5.10 [ 6.673522] tegradc 15210000.display: disp0 connected to head1->sor [ 6.675638] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.681373] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.687421] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.694552] tegradc 15210000.display: DT parsed successfully [ 6.702781] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.704285] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.708152] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.708228] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.715029] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.722461] generic_infoframe_type: 0x87 [ 6.730514] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.736729] tegradc 15200000.display: DT parsed successfully [ 6.743720] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.747407] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.761532] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.774352] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.780783] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.788992] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.788996] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.801531] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.803735] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.826001] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.827192] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.832144] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.832416] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.856311] nvethernet 2490000.ethernet: Macsec not supported [ 6.862485] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.863251] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.869513] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.886739] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.887354] tegradc 15200000.display: probed [ 6.891100] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.902831] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.910801] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.917086] tegra-se-nvhost 15810000.se: initialized [ 6.917538] mmc0: Command Queue Engine enabled [ 6.924632] mmc0: periodic cache flush enabled [ 6.925879] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.929355] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.936172] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.942554] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.953199] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.953364] Console: switching to colour frame buffer device 240x67 [ 6.953719] tegra-se-nvhost 15820000.se: initialized [ 6.960341] tegradc 15200000.display: fb registered [ 6.964388] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.968300] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.971197] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.976695] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.985004] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.991183] tegra-se-nvhost 15830000.se: initialized [ 6.996511] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.003270] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.025841] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.027920] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.032036] tegra-se-nvhost 15840000.se: initialized [ 7.039951] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.039956] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.039960] usb 1-2: Manufacturer: Generic [ 7.042023] hub 1-2:1.0: USB hub found [ 7.046780] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.053402] hub 1-2:1.0: 4 ports detected [ 7.058372] tegra_actmon d230000.actmon: in actmon_register()... [ 7.072487] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.075159] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.082156] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.095832] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.103296] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.111835] hvc_sysfs: hypervisor is not present [ 7.119276] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.130642] Extcon AUX1(HDMI) enable [ 7.134435] tegradc 15210000.display: disp1 connected to head1->sor [ 7.140560] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.146389] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.147390] tegradc 15210000.display: DT parsed successfully [ 7.160658] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.161233] ALSA device list: [ 7.169045] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.171829] No soundcards found. [ 7.178029] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.180136] random: crng init done [ 7.191355] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.197942] tegradc 15210000.display: probed [ 7.199575] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.211015] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.211040] usb 2-3: Manufacturer: Generic [ 7.215744] tegradc 15210000.display: fb registered [ 7.228332] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.231069] hub 2-3:1.0: USB hub found [ 7.232192] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.234302] Freeing unused kernel memory: 3968K [ 7.237928] hub 2-3:1.0: 4 ports detected [ 7.243683] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.253599] Run /init as init process [ 7.261526] tegradc 15210000.display: blank - powerdown [ 7.266861] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.275066] Extcon DP: HPD disabled [ 7.275087] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.275099] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.291179] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.291287] tegradc 15200000.display: blank - powerdown [ 7.309559] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.327009] Root device found: mmcblk0p1 [ 7.328885] Found dev node: /dev/mmcblk0p1 [ 7.339636] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.339642] Extcon AUX1(HDMI) disable [ 7.362989] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.363822] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.364366] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.368530] Rootfs mounted over mmcblk0p1 [ 7.377556] tegradc 15200000.display: unblank [ 7.378582] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.378770] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.384803] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.386756] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.390773] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.390778] Extcon AUX1(HDMI) enable [ 7.393537] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.398206] Switching from initrd to actual rootfs [ 7.403553] tegradc 15200000.display: sync windows ret = 247 [ 7.440653] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.443343] Extcon HDMI: HPD enabled [ 7.447020] tegradc 15200000.display: hdmi: plugged [ 7.458090] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.459540] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.465243] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.473077] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.480241] usb 1-3: Product: Bluetooth Radio [ 7.484615] usb 1-3: Manufacturer: Realtek [ 7.488488] usb 1-3: SerialNumber: 00e04c000001 [ 7.573273] systemd[1]: System time before build time, advancing clock. [ 7.643443] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.648350] systemd[1]: Detected architecture arm64. [ 7.706444] systemd[1]: Set hostname to . [ 7.868487] systemd-sysv-generator[241]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.219093] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.220799] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.226142] systemd[1]: Created slice system-modprobe.slice. [ 8.230879] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.234986] systemd[1]: Created slice User and Session Slice. [ 8.238485] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.242474] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.245827] systemd[1]: Reached target User and Group Name Lookups. [ 8.248975] systemd[1]: Reached target Slices. [ 8.252063] systemd[1]: Reached target Swap. [ 8.255997] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.259557] systemd[1]: Listening on Syslog Socket. [ 8.263045] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.266351] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.270538] systemd[1]: Listening on Journal Audit Socket. [ 8.274026] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.279162] systemd[1]: Listening on Journal Socket. [ 8.282726] systemd[1]: Listening on udev Control Socket. [ 8.287622] systemd[1]: Listening on udev Kernel Socket. [ 8.295659] systemd[1]: Mounting Huge Pages File System... [ 8.303801] systemd[1]: Mounting POSIX Message Queue File System... [ 8.311481] systemd[1]: Mounting RPC Pipe File System... [ 8.319907] systemd[1]: Mounting Kernel Debug File System... [ 8.328284] systemd[1]: Mounting Kernel Trace File System... [ 8.338169] systemd[1]: Starting Journal Service... [ 8.346946] systemd[1]: Starting Set the console keyboard layout... [ 8.355050] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.358535] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.364996] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.373089] systemd[1]: Started Nameserver information manager. [ 8.377335] systemd[1]: Reached target Network (Pre). [ 8.383712] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.385551] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.391958] systemd[1]: Starting Load Kernel Modules... [ 8.399879] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.408792] systemd[1]: Starting udev Coldplug all Devices... [ 8.418871] systemd[1]: Mounted Huge Pages File System. [ 8.422759] systemd[1]: Mounted POSIX Message Queue File System. [ 8.426330] systemd[1]: Mounted RPC Pipe File System. [ 8.429643] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.429979] systemd[1]: Mounted Kernel Debug File System. [ 8.437856] systemd[1]: Mounted Kernel Trace File System. [ 8.442257] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.443918] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.444131] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.446916] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.446929] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.446933] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.447172] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.449704] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.455566] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.455582] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.471677] systemd[1]: nvfb-udev.service: Succeeded. [ 8.477597] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.489378] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.500880] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.502604] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.511650] systemd[1]: Starting Load/Save Random Seed... [ 8.519416] systemd[1]: Starting Create System Users... [ 8.546134] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.546134] [ 8.586329] systemd[1]: Finished Load Kernel Modules. [ 8.592646] systemd[1]: Finished Load/Save Random Seed. [ 8.597362] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.606102] systemd[1]: Mounting Kernel Configuration File System... [ 8.613958] systemd[1]: Started OP-TEE Client Supplicant. [ 8.622203] systemd[1]: Starting Apply Kernel Variables... [ 8.632243] systemd[1]: Finished Set the console keyboard layout. [ 8.639202] systemd[1]: Mounted Kernel Configuration File System. [ 8.650936] systemd[1]: Finished Create System Users. [ 10.036448] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.043750] imx219 9-0010: board setup failed [ 10.045227] imx219: probe of 9-0010 failed with error -121 [ 10.057700] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.070764] imx219 10-0010: board setup failed [ 10.070861] imx219: probe of 10-0010 failed with error -121 [ 10.168542] hot-surface-alert cooling state: 0 -> 1 [ 11.386528] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.386535] Creating 1 MTD partitions on "spi6.0": [ 11.386544] 0x000000000000-0x000002000000 : "Whole_flash0" [ 11.410120] using random self ethernet address [ 11.410126] using random host ethernet address [ 12.459895] using random self ethernet address [ 12.461450] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.766381] nvidia: loading out-of-tree module taints kernel. [ 59.535537] watchdog: watchdog0: watchdog did not stop! [ 59.994856] Trying to unregister non-registered hwtime source [ 63.056027] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.057500] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.310] I> sdmmc DDR50 mode [0001.328] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.345] W> Cannot find any partition table for 00000003 [0001.346] > PARTITION_MANAGER: Failed to publish partition. [0001.362] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.363] I> Active Boot chain : 0 [0002.034] I> Relocating BR-BCT [0002.035] > DEVICE_PROD: device prod is not initialized. [0002.341] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.342] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.343] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.343] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.343] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.344] I> dram_block larger than 80000000 [0002.346] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.358] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.361] I> found decompressor handler: lz4 [0002.590] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.591] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.212] I> Welcome to NVDisp-Init [0003.212] I> NVDisp-Init version: t194-f9ecfedc [0003.213] I> CPU-BL Params @ 0xca020000 [0003.213] I> 0) Base:0x00000000 Size:0x00000000 [0003.213] I> 1) Base:0xc8300000 Size:0x00100000 [0003.213] I> 2) Base:0xc9800000 Size:0x00200000 [0003.214] I> 3) Base:0xc8600000 Size:0x00200000 [0003.216] I> 4) Base:0xc8200000 Size:0x00100000 [0003.221] I> 5) Base:0xc8100000 Size:0x00100000 [0003.225] I> 6) Base:0xc9400000 Size:0x00400000 [0003.230] I> 7) Base:0xc9000000 Size:0x00400000 [0003.234] I> 8) Base:0xc8000000 Size:0x00100000 [0003.239] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.243] I> 10) Base:0xca800000 Size:0x00800000 [0003.248] I> 11) Base:0x40000000 Size:0x00040000 [0003.252] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.256] I> 13) Base:0x40046000 Size:0x00002000 [0003.261] I> 14) Base:0x40048000 Size:0x00002000 [0003.265] I> 15) Base:0xaf000000 Size:0x00004000 [0003.270] I> 16) Base:0x4004a000 Size:0x00002000 [0003.274] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.279] I> 18) Base:0x4004c000 Size:0x00002000 [0003.283] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.288] I> 20) Base:0x4004e000 Size:0x00002000 [0003.292] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.297] I> 22) Base:0x00000000 Size:0x00000000 [0003.301] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.306] I> 24) Base:0xcc000000 Size:0x02000000 [0003.310] I> 25) Base:0x40050000 Size:0x00002000 [0003.314] I> 26) Base:0x40040000 Size:0x00006000 [0003.319] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.323] I> 28) Base:0xc8400000 Size:0x00200000 [0003.328] I> 29) Base:0xc8800000 Size:0x00400000 [0003.332] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.337] I> 31) Base:0x00000000 Size:0x00000000 [0003.341] I> 32) Base:0xf8000000 Size:0x08000000 [0003.346] I> 33) Base:0xce000000 Size:0x2a000000 [0003.350] I> 34) Base:0xcb000000 Size:0x01000000 [0003.355] I> 35) Base:0xae000000 Size:0x01000000 [0003.359] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.364] I> 37) Base:0xca000000 Size:0x00800000 [0003.368] I> 38) Base:0x80000000 Size:0x20000000 [0003.372] I> 39) Base:0xb0000000 Size:0x08000000 [0003.377] I> 40) Base:0x00000000 Size:0x00000000 [0003.381] I> 41) Base:0x00000000 Size:0x00000000 [0003.386] I> 42) Base:0x00000000 Size:0x00000000 [0003.390] I> 43) Base:0x00000000 Size:0x00000000 [0003.395] I> 44) Base:0x00000000 Size:0x00000000 [0003.399] I> 45) Base:0x00000000 Size:0x00000000 [0003.404] GIC-SPI Target CPU: 0 [0003.407] Interrupts Init done [0003.410] calling constructors [0003.412] initializing heap [0003.415] I> Heap: [0xa0960000 ... 0xadf00000] [0003.419] initializing threads [0003.422] initializing timers [0003.425] creating bootstrap completion thread [0003.429] top of bootstrap2() [0003.432] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.437] initializing platform [0003.440] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.445] W> device prod register failed [0003.449] I> Bl_dtb @0xadf00000 [0003.452] I> gpio framework initialized [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.468] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.474] I> fixed regulator driver initialized [0003.490] I> register 'maxim' power off handle [0003.493] I> virtual i2c enabled [0003.493] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.494] I> Boot-device: QSPI [0003.496] I> Boot_device: QSPI_FLASH instance: 0 [0003.501] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.511] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.519] I> QSPI source rate = 204000 Khz [0003.522] I> Requested rate for QSPI clock = 34000 Khz [0003.527] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.532] I> tx_clk_tap_delay : 0 [0003.534] I> rx_clk_tap_delay : 16 [0003.538] I> QSPI Flash Size = 32 MB [0003.546] I> Qspi initialized successfully [0003.546] I> qspi flash-0 params source = boot args [0003.550] W> No board IDs available [0003.553] E> Failed to get board id info! [0003.559] I> sdmmc-3 params source = safe params [0003.566] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.567] W> Cannot find any partition table for 00000003 [0003.572] E> Failed to publish 00000003 [0003.577] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> hdmi cable connected [0003.609] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.619] E> invalid display type [0003.620] E> cannot find any other nvdisp nodes [0003.636] I> edid read success [0003.649] I> edid read success [0003.649] I> width = 640, height = 480, frequency = 25174825 [0003.649] I> width = 1920, height = 1080, frequency = 148500000 [0003.650] I> width = 1280, height = 768, frequency = 79500000 [0003.650] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 720, height = 480, frequency = 26973026 [0003.688] I> width = 720, height = 576, frequency = 26973026 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 4096, height = 2160, frequency = 296703296 [0003.723] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.734] I> hdmi_enable, starting HDMI initialisation [0003.739] I> hdmi_enable, HDMI initialisation complete [0003.748] initializing target [0003.749] calling apps_init() [0003.750] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000026] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000689] Console: colour dummy device 80x25 [ 0.002052] printk: console [tty0] enabled [ 0.002113] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002147] pid_max: default: 32768 minimum: 301 [ 0.002315] LSM: Security Framework initializing [ 0.002376] Yama: becoming mindful. [ 0.002419] SELinux: Initializing. [ 0.002563] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002602] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005498] rcu: Hierarchical SRCU implementation. [ 0.005736] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006452] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006524] DTB Build time: Aug 10 2022 20:31:49 [ 0.009164] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009386] Remapping and enabling EFI services. [ 0.011486] smp: Bringing up secondary CPUs ... [ 0.046748] Detected PIPT I-cache on CPU1 [ 0.046851] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.076838] Detected PIPT I-cache on CPU2 [ 0.076985] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.106524] Detected PIPT I-cache on CPU3 [ 0.106663] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.136346] Detected PIPT I-cache on CPU4 [ 0.136447] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.166165] Detected PIPT I-cache on CPU5 [ 0.166320] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166708] smp: Brought up 1 node, 6 CPUs [ 0.166867] SMP: Total of 6 processors activated. [ 0.166937] CPU features: detected: Privileged Access Never [ 0.166961] CPU features: detected: LSE atomic instructions [ 0.166975] CPU features: detected: User Access Override [ 0.166988] CPU features: detected: 32-bit EL0 Support [ 0.167001] CPU features: detected: RAS Extension Support [ 0.167013] CPU features: detected: CRC32 instructions [ 0.167027] CPU features: detected: 32-bit EL1 Support [ 0.234527] CPU: All CPU(s) started at EL2 [ 0.241275] devtmpfs: initialized [ 0.288011] Registered cp15_barrier emulation handler [ 0.288136] Registered setend emulation handler [ 0.288157] KASLR enabled [ 0.288410] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288434] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289861] pinctrl core: initialized pinctrl subsystem [ 0.290797] SMBIOS 3.0.0 present. [ 0.290825] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291458] NET: Registered protocol family 16 [ 0.293515] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.294050] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294764] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294813] audit: initializing netlink subsys (disabled) [ 0.295037] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.295414] thermal_sys: Registered thermal governor 'step_wise' [ 0.295421] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295434] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.297692] cpuidle: using governor menu [ 0.298223] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.298705] ASID allocator initialised with 32768 entries [ 0.298943] Serial: AMBA PL011 UART driver [ 0.302136] Tegra reboot handler registered. [ 0.373637] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.373786] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.374007] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.374059] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.374221] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.374271] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.374391] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.374438] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.374583] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.374648] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.376944] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.377002] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.377035] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.377081] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.377114] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.377144] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.377185] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.377219] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.377247] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.377273] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.377302] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.377328] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.377353] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.377379] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.377405] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.377431] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.377456] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.377553] mc-err: mcerr ops are set to t19x [ 0.390327] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390351] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390366] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390378] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397496] ACPI: Interpreter disabled. [ 0.399421] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.401297] iommu: Default domain type: Translated [ 0.401414] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.401925] SCSI subsystem initialized [ 0.402180] usbcore: registered new interface driver usbfs [ 0.402263] usbcore: registered new interface driver hub [ 0.402316] usbcore: registered new device driver usb [ 0.402851] mc: Linux media interface: v0.10 [ 0.402904] videodev: Linux video capture interface: v2.00 [ 0.403372] pps_core: LinuxPPS API ver. 1 registered [ 0.403389] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403419] PTP clock support registered [ 0.403691] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404172] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.404294] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.405166] Registered efivars operations [ 0.413895] FPGA manager framework [ 0.414009] Advanced Linux Sound Architecture Driver Initialized. [ 0.414748] Bluetooth: Core ver 2.22 [ 0.414794] NET: Registered protocol family 31 [ 0.414805] Bluetooth: HCI device and connection manager initialized [ 0.414842] Bluetooth: HCI socket layer initialized [ 0.414855] Bluetooth: L2CAP socket layer initialized [ 0.414876] Bluetooth: SCO socket layer initialized [ 0.417088] camchar: rtcpu character device driver loaded [ 0.418262] clocksource: Switched to clocksource arch_sys_counter [ 0.840886] VFS: Disk quotas dquot_6.6.0 [ 0.840980] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.841433] pnp: PnP ACPI: disabled [ 0.855728] la/ptsa driver initialized. [ 0.855898] NET: Registered protocol family 2 [ 0.856134] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.864125] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.864244] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.864599] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.865134] TCP: Hash tables configured (established 65536 bind 65536) [ 0.865293] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.865455] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.865724] NET: Registered protocol family 1 [ 0.866631] RPC: Registered named UNIX socket transport module. [ 0.866664] RPC: Registered udp transport module. [ 0.866678] RPC: Registered tcp transport module. [ 0.866692] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.866715] PCI: CLS 0 bytes, default 64 [ 0.866976] Trying to unpack rootfs image as initramfs... [ 1.121549] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.124736] Freeing initrd memory: 8196K [ 1.128978] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.129037] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.129084] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.129394] kvm [1]: IPA Size Limit: 40 bits [ 1.129858] kvm [1]: vgic interrupt IRQ9 [ 1.130396] kvm [1]: VHE mode initialized successfully [ 1.131753] Initialise system trusted keyrings [ 1.132075] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.138410] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.139317] NFS: Registering the id_resolver key type [ 1.139366] Key type id_resolver registered [ 1.139407] Key type id_legacy registered [ 1.139503] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.139528] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.139600] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.149420] NET: Registered protocol family 38 [ 1.149444] Key type asymmetric registered [ 1.149460] Asymmetric key parser 'x509' registered [ 1.149511] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.149783] io scheduler mq-deadline registered [ 1.149802] io scheduler kyber registered [ 1.155658] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.158675] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.158783] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.158905] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.158979] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.159072] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.164675] scrncapt: init (heads:4 wins:6 planes:4) [ 1.164851] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.165969] EINJ: ACPI disabled. [ 1.169407] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.169459] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.169474] tegra-pmc: ### PMC reset level: L1 [ 1.169488] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.169578] tegra-pmc: PMC Prod config success [ 1.174587] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.180089] random: fast init done [ 1.180408] printk: console [ttyTCU0] enabled [ 2.731963] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.736557] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.741138] arm-smmu 10000000.iommu: stage 1 translation [ 2.746981] arm-smmu 10000000.iommu: stage 2 translation [ 2.752122] arm-smmu 10000000.iommu: nested translation [ 2.757713] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.764889] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.774727] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.777736] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.784580] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.792084] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.797614] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.802337] arm-smmu 12000000.iommu: stage 1 translation [ 2.807591] arm-smmu 12000000.iommu: stage 2 translation [ 2.813015] arm-smmu 12000000.iommu: nested translation [ 2.818704] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.825879] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.835590] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.839001] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.845304] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.852941] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.863039] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.865935] tegra_profiler: auth: init [ 2.869993] THERMAL EST: found 3 subdevs [ 2.873657] THERMAL EST num_resources: 0 [ 2.877244] [THERMAL EST subdev 0] [ 2.880823] [THERMAL EST subdev 1] [ 2.883976] [THERMAL EST subdev 2] [ 2.887541] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.894023] THERMAL EST: thz register success. [ 2.898188] THERMAL EST: end of probe, return err: 0 [ 2.903307] nvsciipc: loaded module [ 2.910384] tun: Universal TUN/TAP device driver, 1.6 [ 2.913108] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.918985] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.924803] e1000e: Intel(R) PRO/1000 Network Driver [ 2.929482] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.935814] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.941111] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.947045] PPP generic driver version 2.4.2 [ 2.951264] PPP BSD Compression module registered [ 2.955832] PPP Deflate Compression module registered [ 2.961359] PPP MPPE Compression module registered [ 2.966089] usbcore: registered new interface driver r8152 [ 2.971854] usbcore: registered new interface driver asix [ 2.977192] usbcore: registered new interface driver ax88179_178a [ 2.983319] usbcore: registered new interface driver cdc_ether [ 2.989003] usbcore: registered new interface driver net1080 [ 2.994606] usbcore: registered new interface driver cdc_subset [ 3.000643] usbcore: registered new interface driver zaurus [ 3.006369] usbcore: registered new interface driver cdc_ncm [ 3.012028] usbcore: registered new interface driver aqc111 [ 3.017670] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.024007] ohci-pci: OHCI PCI platform driver [ 3.028034] ohci-platform: OHCI generic platform driver [ 3.033828] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.040521] usbcore: registered new interface driver uas [ 3.044598] usbcore: registered new interface driver usb-storage [ 3.050709] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.056487] mousedev: PS/2 mouse device common for all mice [ 3.061765] usbcore: registered new interface driver xpad [ 3.069412] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.072242] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.080009] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.086641] i2c /dev entries driver [ 3.089869] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.096009] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.101007] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.106462] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.111772] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.117268] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.122660] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.136097] device-mapper: uevent: version 1.0.3 [ 3.136551] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.143191] cpuidle: Initializing cpuidle driver [ 3.147105] sdhci: Secure Digital Host Controller Interface driver [ 3.151836] sdhci: Copyright(c) Pierre Ossman [ 3.156187] Synopsys Designware Multimedia Card Interface Driver [ 3.162140] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.168081] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.168838] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.181658] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.203738] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.213332] vdd-1v0: supplied by regulator-dummy [ 3.218866] vdd-1v8-hs: supplied by regulator-dummy [ 3.223626] vdd-1v8-ls: supplied by regulator-dummy [ 3.228420] vdd-1v8-ao: supplied by regulator-dummy [ 3.232413] vddio-ddr-1v1: supplied by regulator-dummy [ 3.236908] vdd-rtc: supplied by regulator-dummy [ 3.238750] spmic-ldo1: supplied by regulator-dummy [ 3.240020] vdd-ao-3v3: supplied by regulator-dummy [ 3.246264] vddio-emmc-3v3: supplied by regulator-dummy [ 3.252569] spmic-ldo4: supplied by regulator-dummy [ 3.253794] vdd-usb-3v3: supplied by regulator-dummy [ 3.260054] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.266330] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.271852] spmic-ldo8: supplied by vdd-1v8-ls [ 3.273487] gpio-510 (gpio_default): hogged as output/high [ 3.274874] gpio-511 (gpio_default): hogged as output/high [ 3.277789] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.414176] max77686-rtc max77620-rtc: registered as rtc0 [ 3.415336] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.415722] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.237531] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.238646] hid: raw HID events driver (C) Jiri Kosina [ 4.239510] usbcore: registered new interface driver usbhid [ 4.239667] usbhid: USB HID core driver [ 4.241695] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.243140] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.359914] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.434287] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.181 ms) ÿá[ 4.327691] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.328616] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.329662] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.330539] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.332418] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.333071] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.333828] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.335457] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.335759] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.338805] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.343855] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.350422] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.355354] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.361388] denver_knobs_init:MTS_VERSION:55637613 [ 4.373837] t19x_cache tegra-cache: probed [ 4.376907] optee: probing for conduit method. [ 4.377855] optee: revision 3.16 (65cc2218) [ 4.378851] optee: dynamic shared memory is enabled [ 4.382671] optee: initialized driver [ 4.389207] nvpmodel: initialized successfully [ 4.390076] tegra_hv: get_hvd: not initialized yet [ 4.394871] user_ivc_mempool: hypervisor not present [ 4.400422] usbcore: registered new interface driver snd-usb-audio [ 4.407071] u32 classifier [ 4.408327] input device check on [ 4.412194] Actions configured [ 4.415998] Initializing XFRM netlink socket [ 4.420751] NET: Registered protocol family 10 [ 4.427685] Segment Routing with IPv6 [ 4.428008] NET: Registered protocol family 17 [ 4.432538] NET: Registered protocol family 15 [ 4.436678] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.450310] Bluetooth: RFCOMM socket layer initialized [ 4.455166] Bluetooth: RFCOMM ver 1.11 [ 4.458836] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.464894] Bluetooth: HIDP socket layer initialized [ 4.470412] 9pnet: Installing 9P2000 support [ 4.474029] Key type dns_resolver registered [ 4.479612] registered taskstats version 1 [ 4.482772] Loading compiled-in X.509 certificates [ 4.494347] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.498410] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.508468] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.510759] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.519014] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.527644] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.642368] tegra194-pcie 14160000.pcie: Link up [ 4.645036] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.645285] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.645415] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.645607] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.645782] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.646097] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.646577] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.658578] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.659067] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.659541] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.661050] pci 0004:01:00.0: supports D1 D2 [ 4.661272] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.669390] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.670051] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.670523] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.670981] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.671298] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.671511] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.677270] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.684550] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.693070] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.703276] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.707842] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.714030] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.720688] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.729642] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.731016] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.739257] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.747945] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.863021] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.863549] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.863771] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.863893] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.864162] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.864365] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.864767] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.865182] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.880054] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.880441] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.882610] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.883685] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.884953] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.886334] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.887138] pci 0005:00:00.0: Removing from iommu group 7 [ 5.887372] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.917009] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.937272] host1x 13e10000.host1x: initialized [ 5.938795] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.939780] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.940924] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.941895] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.943178] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.943964] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.945160] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.946364] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.956347] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.963247] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.973251] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.979936] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.989894] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.997157] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.006964] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.014069] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.023675] falcon 15340000.vic: Adding to iommu group 17 [ 6.038489] falcon 15340000.vic: initialized [ 6.039431] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.045060] falcon 15380000.nvjpg: initialized [ 6.045578] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.056327] falcon 154c0000.nvenc: initialized [ 6.056902] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.066411] falcon 15a80000.nvenc1: initialized [ 6.066977] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.078470] nvdec 15480000.nvdec: initialized [ 6.079062] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.089060] nvdec 15140000.nvdec1: initialized [ 6.089628] tsec 15500000.tsec: Adding to iommu group 18 [ 6.095831] tsec 15500000.tsec: initialized [ 6.096347] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.103963] tsec 15100000.tsecb: initialized [ 6.107729] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.131496] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.142007] gpio-374 (wifi-enable): hogged as output/high [ 6.142484] gpio-431 (camera-control-output-low): hogged as output/low [ 6.142793] gpio-432 (camera-control-output-low): hogged as output/low [ 6.144513] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.146050] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.148767] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.155028] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.160647] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.166097] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.171927] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.179588] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.187753] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.199119] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.204451] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.210316] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.219138] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.228162] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.236134] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.243599] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.249481] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.258881] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.265306] pva 16000000.pva0: Adding to iommu group 22 [ 6.292327] pva 16000000.pva0: initialized [ 6.297037] pva 16800000.pva1: Adding to iommu group 23 [ 6.307946] pva 16800000.pva1: initialized [ 6.312213] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.332393] nvdla 15880000.nvdla0: initialized [ 6.333767] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.342610] nvdla 158c0000.nvdla1: initialized [ 6.346739] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.347157] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.347255] tegradc 15200000.display: Adding to iommu group 26 [ 6.347379] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.347416] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.347590] tegradccommon 15200000.display-hub: dma mapping done [ 6.348545] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.349743] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.355358] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.356721] tegradc 15210000.display: Adding to iommu group 26 [ 6.357062] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.357533] generic_infoframe_type: 0x87 [ 6.357712] tegradc 15200000.display: DT parsed successfully [ 6.357815] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.360447] tegra_cec 3960000.tegra_cec: probed [ 6.382622] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.391426] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.395196] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.405559] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.409267] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.418332] kfuse 3830000.kfuse: initialized [ 6.437074] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.437421] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.442294] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.455307] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.461379] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.462022] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.479450] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.488259] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.489274] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.501025] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.501459] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.509680] tegradc 15210000.display: disp0 connected to head1->sor [ 6.517377] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.522711] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.528867] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.535793] tegradc 15210000.display: DT parsed successfully [ 6.550187] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.556024] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.567350] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.573030] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.581078] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.589864] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.596664] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.603949] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.611057] usb usb1: Product: xHCI Host Controller [ 6.616248] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.622493] usb usb1: SerialNumber: 3610000.xhci [ 6.628084] hub 1-0:1.0: USB hub found [ 6.631200] hub 1-0:1.0: 4 ports detected [ 6.635697] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.640294] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.647902] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.655855] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.663480] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.670697] usb usb2: Product: xHCI Host Controller [ 6.675970] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.682149] usb usb2: SerialNumber: 3610000.xhci [ 6.687713] hub 2-0:1.0: USB hub found [ 6.690359] hub 2-0:1.0: 4 ports detected [ 6.730349] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.735774] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.736933] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.737155] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.750970] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1903000 KHz, changing to: 1907200 KHz [ 6.751997] tegra194-cpufreq ccplex: probed with BWMGR [ 6.753210] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.753853] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.754382] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.755821] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.766258] mmc0: CQHCI version 5.10 [ 6.767405] tegra194-vi5 15c10000.vi: initialized [ 6.769716] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.770959] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.774488] generic_infoframe_type: 0x87 [ 6.774547] tegradc 15200000.display: DT parsed successfully [ 6.780650] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.784668] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.790400] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.796428] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.799136] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.805978] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.812521] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.812530] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.820479] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.829288] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.835354] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.842270] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.843840] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.851806] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.858313] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.864400] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.865714] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.872004] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.883245] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.888856] mmc0: Command Queue Engine enabled [ 6.888860] mmc0: periodic cache flush enabled [ 6.888872] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.889317] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.889495] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.893251] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.894275] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.903302] tegradc 15200000.display: probed [ 6.907909] nvethernet 2490000.ethernet: Macsec not supported [ 6.983169] Console: switching to colour frame buffer device 240x67 [ 6.984253] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.989015] tegradc 15200000.display: fb registered [ 6.989091] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 7.007782] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 7.008465] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.013576] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 7.019524] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.026763] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.040366] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.047212] tegra-se-nvhost 15810000.se: initialized [ 7.049476] random: crng init done [ 7.055122] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.060787] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.067107] tegra-se-nvhost 15820000.se: initialized [ 7.071888] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.073253] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.079687] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.086518] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.093247] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.100032] tegra-se-nvhost 15830000.se: initialized [ 7.102785] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.103851] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.103865] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.103987] usb 1-2: Manufacturer: Generic [ 7.104505] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.109966] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.117698] Extcon AUX1(HDMI) enable [ 7.126046] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.133514] tegradc 15210000.display: disp1 connected to head1->sor [ 7.133940] hub 1-2:1.0: USB hub found [ 7.135154] hub 1-2:1.0: 4 ports detected [ 7.138416] tegra-se-nvhost 15840000.se: initialized [ 7.144777] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.152615] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.154555] tegradc 15210000.display: DT parsed successfully [ 7.162015] tegra_actmon d230000.actmon: in actmon_register()... [ 7.166515] tegradc 15210000.display: Display dc.00000000cb501608 registered with id=1 [ 7.170510] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.174886] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.179858] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.187037] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.193782] hvc_sysfs: hypervisor is not present [ 7.205251] tegradc 15210000.display: probed [ 7.213796] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.239594] ALSA device list: [ 7.258332] No soundcards found. [ 7.261555] tegradc 15210000.display: fb registered [ 7.264965] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.273566] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.273575] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.280241] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.282693] Freeing unused kernel memory: 3968K [ 7.286802] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.295344] Run /init as init process [ 7.299639] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.299648] usb 2-3: Manufacturer: Generic ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.319354] tegradc 15200000.display: blank - powerdown [ 7.321602] hub 2-3:1.0: USB hub found [ 7.323438] hub 2-3:1.0: 4 ports detected [ 7.353229] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.353235] Extcon AUX1(HDMI) disable [ 7.366260] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.366265] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.376383] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.377192] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.390372] tegradc 15200000.display: unblank [ 7.391477] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.391668] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.397425] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.398244] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.399307] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.403275] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.403279] Extcon AUX1(HDMI) enable [ 7.416066] tegradc 15200000.display: sync windows ret = 247 [ 7.448301] tegradc 15210000.display: blank - powerdown [ 7.449919] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.449923] Extcon DP: HPD disabled [ 7.449928] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.449938] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.449944] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.467545] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.474767] Extcon HDMI: HPD enabled [ 7.478153] tegradc 15200000.display: hdmi: plugged [ 7.517688] Root device found: mmcblk0p1 [ 7.521344] Found dev node: /dev/mmcblk0p1 [ 7.551517] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.553036] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.554556] usb 1-3: Product: Bluetooth Radio [ 7.555883] usb 1-3: Manufacturer: Realtek [ 7.557156] usb 1-3: SerialNumber: 00e04c000001 [ 7.557948] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.564177] Rootfs mounted over mmcblk0p1 [ 7.600675] Switching from initrd to actual rootfs [ 7.750970] systemd[1]: System time before build time, advancing clock. [ 7.823970] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.828896] systemd[1]: Detected architecture arm64. [ 7.879911] systemd[1]: Set hostname to . [ 8.046474] systemd-sysv-generator[257]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.400624] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.402360] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.407688] systemd[1]: Created slice system-modprobe.slice. [ 8.412249] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.416311] systemd[1]: Created slice User and Session Slice. [ 8.419824] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.423928] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.427366] systemd[1]: Reached target User and Group Name Lookups. [ 8.430554] systemd[1]: Reached target Slices. [ 8.433638] systemd[1]: Reached target Swap. [ 8.437693] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.441321] systemd[1]: Listening on Syslog Socket. [ 8.444881] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.448207] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.453951] systemd[1]: Listening on Journal Audit Socket. [ 8.459009] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.462810] systemd[1]: Listening on Journal Socket. [ 8.466561] systemd[1]: Listening on udev Control Socket. [ 8.470113] systemd[1]: Listening on udev Kernel Socket. [ 8.478692] systemd[1]: Mounting Huge Pages File System... [ 8.487079] systemd[1]: Mounting POSIX Message Queue File System... [ 8.495019] systemd[1]: Mounting RPC Pipe File System... [ 8.503664] systemd[1]: Mounting Kernel Debug File System... [ 8.512666] systemd[1]: Mounting Kernel Trace File System... [ 8.522967] systemd[1]: Starting Journal Service... [ 8.534372] systemd[1]: Starting Set the console keyboard layout... [ 8.544858] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.548408] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.554636] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.562948] systemd[1]: Started Nameserver information manager. [ 8.567623] systemd[1]: Reached target Network (Pre). [ 8.574835] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.576572] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.584860] systemd[1]: Starting Load Kernel Modules... [ 8.592467] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.600802] systemd[1]: Starting udev Coldplug all Devices... [ 8.612365] systemd[1]: Mounted Huge Pages File System. [ 8.616000] systemd[1]: Mounted POSIX Message Queue File System. [ 8.619552] systemd[1]: Mounted RPC Pipe File System. [ 8.623231] systemd[1]: Mounted Kernel Debug File System. [ 8.625130] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.625626] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.625634] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.625643] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.625647] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.625855] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.626080] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.632744] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.633164] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.638756] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.643589] systemd[1]: Mounted Kernel Trace File System. [ 8.650304] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.655638] systemd[1]: nvfb-udev.service: Succeeded. [ 8.659640] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.671966] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.678468] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.680231] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.694231] systemd[1]: Starting Load/Save Random Seed... [ 8.701847] systemd[1]: Starting Create System Users... [ 8.750736] systemd[1]: Finished Load/Save Random Seed. [ 8.754778] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.754778] [ 8.762617] systemd[1]: Finished Create System Users. [ 8.770673] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.795459] systemd[1]: Finished Set the console keyboard layout. [ 8.802393] systemd[1]: Finished Load Kernel Modules. [ 8.806744] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.816121] systemd[1]: Mounting Kernel Configuration File System... [ 8.823932] systemd[1]: Started OP-TEE Client Supplicant. [ 8.832797] systemd[1]: Starting Apply Kernel Variables... [ 8.845030] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.849231] systemd[1]: Mounted Kernel Configuration File System. [ 8.852838] systemd[1]: Reached target Local File Systems (Pre). [ 8.856048] systemd[1]: Reached target Local File Systems. [ 8.859128] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 10.302671] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.309148] imx219 9-0010: board setup failed [ 10.310528] imx219: probe of 9-0010 failed with error -121 [ 10.324702] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.330966] hot-surface-alert cooling state: 0 -> 1 [ 10.331191] imx219 10-0010: board setup failed [ 10.333449] imx219: probe of 10-0010 failed with error -121 [ 10.749697] using random self ethernet address [ 10.775911] using random host ethernet address [ 12.286677] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.288433] Creating 1 MTD partitions on "spi6.0": [ 12.290063] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.547000] using random self ethernet address [ 12.548633] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.805192] nvidia: loading out-of-tree module taints kernel. [ 59.219992] watchdog: watchdog0: watchdog did not stop! [ 59.655350] Trying to unregister non-registered hwtime source [ 62.714173] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.716367] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gòÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: Thiÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäs OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.210] I> Welcome to NVDisp-Init [0003.211] I> NVDisp-Init version: t194-f9ecfedc [0003.211] I> CPU-BL Params @ 0xca020000 [0003.211] I> 0) Base:0x00000000 Size:0x00000000 [0003.212] I> 1) Base:0xc8300000 Size:0x00100000 [0003.212] I> 2) Base:0xc9800000 Size:0x00200000 [0003.212] I> 3) Base:0xc8600000 Size:0x00200000 [0003.215] I> 4) Base:0xc8200000 Size:0x00100000 [0003.219] I> 5) Base:0xc8100000 Size:0x00100000 [0003.224] I> 6) Base:0xc9400000 Size:0x00400000 [0003.228] I> 7) Base:0xc9000000 Size:0x00400000 [0003.233] I> 8) Base:0xc8000000 Size:0x00100000 [0003.237] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.242] I> 10) Base:0xca800000 Size:0x00800000 [0003.246] I> 11) Base:0x40000000 Size:0x00040000 [0003.251] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.255] I> 13) Base:0x40046000 Size:0x00002000 [0003.259] I> 14) Base:0x40048000 Size:0x00002000 [0003.264] I> 15) Base:0xaf000000 Size:0x00004000 [0003.268] I> 16) Base:0x4004a000 Size:0x00002000 [0003.273] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.277] I> 18) Base:0x4004c000 Size:0x00002000 [0003.282] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.286] I> 20) Base:0x4004e000 Size:0x00002000 [0003.291] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.295] I> 22) Base:0x00000000 Size:0x00000000 [0003.300] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.304] I> 24) Base:0xcc000000 Size:0x02000000 [0003.309] I> 25) Base:0x40050000 Size:0x00002000 [0003.313] I> 26) Base:0x40040000 Size:0x00006000 [0003.317] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.322] I> 28) Base:0xc8400000 Size:0x00200000 [0003.326] I> 29) Base:0xc8800000 Size:0x00400000 [0003.331] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.335] I> 31) Base:0x00000000 Size:0x00000000 [0003.340] I> 32) Base:0xf8000000 Size:0x08000000 [0003.344] I> 33) Base:0xce000000 Size:0x2a000000 [0003.349] I> 34) Base:0xcb000000 Size:0x01000000 [0003.353] I> 35) Base:0xae000000 Size:0x01000000 [0003.358] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.362] I> 37) Base:0xca000000 Size:0x00800000 [0003.367] I> 38) Base:0x80000000 Size:0x20000000 [0003.371] I> 39) Base:0xb0000000 Size:0x08000000 [0003.375] I> 40) Base:0x00000000 Size:0x00000000 [0003.380] I> 41) Base:0x00000000 Size:0x00000000 [0003.384] I> 42) Base:0x00000000 Size:0x00000000 [0003.389] I> 43) Base:0x00000000 Size:0x00000000 [0003.393] I> 44) Base:0x00000000 Size:0x00000000 [0003.398] I> 45) Base:0x00000000 Size:0x00000000 [0003.402] GIC-SPI Target CPU: 0 [0003.405] Interrupts Init done [0003.408] calling constructors [0003.411] initializing heap [0003.414] I> Heap: [0xa0960000 ... 0xadf00000] [0003.418] initializing threads [0003.421] initializing timers [0003.424] creating bootstrap completion thread [0003.428] top of bootstrap2() [0003.431] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.435] initializing platform [0003.438] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.444] W> device prod register failed [0003.447] I> Bl_dtb @0xadf00000 [0003.450] I> gpio framework initialized [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.470] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.474] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.495] I> Boot_device: QSPI_FLASH instance: 0 [0003.499] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.510] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.517] I> QSPI source rate = 204000 Khz [0003.520] I> Requested rate for QSPI clock = 34000 Khz [0003.525] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.530] I> tx_clk_tap_delay : 0 [0003.533] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.544] I> Qspi initialized successfully [0003.544] I> qspi flash-0 params source = boot args [0003.549] W> No board IDs available [0003.552] E> Failed to get board id info! [0003.558] I> sdmmc-3 params source = safe params [0003.565] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.566] W> Cannot find any partition table for 00000003 [0003.571] E> Failed to publish 00000003 [0003.575] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.649] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.723] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.739] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.749] calling apps_init() [0003.750] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000801] Console: colour dummy device 80x25 [ 0.002309] printk: console [tty0] enabled [ 0.002373] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002411] pid_max: default: 32768 minimum: 301 [ 0.002604] LSM: Security Framework initializing [ 0.002664] Yama: becoming mindful. [ 0.002708] SELinux: Initializing. [ 0.002900] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002944] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006161] rcu: Hierarchical SRCU implementation. [ 0.006402] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007448] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007526] DTB Build time: Aug 10 2022 20:31:49 [ 0.010652] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010912] Remapping and enabling EFI services. [ 0.012978] smp: Bringing up secondary CPUs ... [ 0.043147] Detected PIPT I-cache on CPU1 [ 0.043223] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072880] Detected PIPT I-cache on CPU2 [ 0.072957] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102609] Detected PIPT I-cache on CPU3 [ 0.102704] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132385] Detected PIPT I-cache on CPU4 [ 0.132565] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162222] Detected PIPT I-cache on CPU5 [ 0.162289] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162674] smp: Brought up 1 node, 6 CPUs [ 0.163076] SMP: Total of 6 processors activated. [ 0.163143] CPU features: detected: Privileged Access Never [ 0.163173] CPU features: detected: LSE atomic instructions [ 0.163194] CPU features: detected: User Access Override [ 0.163214] CPU features: detected: 32-bit EL0 Support [ 0.163233] CPU features: detected: RAS Extension Support [ 0.163252] CPU features: detected: CRC32 instructions [ 0.163271] CPU features: detected: 32-bit EL1 Support [ 0.228592] CPU: All CPU(s) started at EL2 [ 0.233528] devtmpfs: initialized [ 0.286303] Registered cp15_barrier emulation handler [ 0.286486] Registered setend emulation handler [ 0.286518] KASLR enabled [ 0.286803] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286847] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288019] pinctrl core: initialized pinctrl subsystem [ 0.289022] SMBIOS 3.0.0 present. [ 0.289071] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289734] NET: Registered protocol family 16 [ 0.291538] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292065] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292768] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292846] audit: initializing netlink subsys (disabled) [ 0.293145] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293544] thermal_sys: Registered thermal governor 'step_wise' [ 0.293551] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293574] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295601] cpuidle: using governor menu [ 0.295913] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296369] ASID allocator initialised with 32768 entries [ 0.296600] Serial: AMBA PL011 UART driver [ 0.299934] Tegra reboot handler registered. [ 0.360461] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.360623] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.360811] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.360885] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.361038] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.361133] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.361278] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.361329] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.361449] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.361495] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.363811] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.363853] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.363887] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.363921] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.363957] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.363990] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.364034] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.364074] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.364105] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.364135] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.364189] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.364223] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.364275] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.364305] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.364350] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.364381] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.364419] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.364515] mc-err: mcerr ops are set to t19x [ 0.375698] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.375728] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.375747] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.375765] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.383072] ACPI: Interpreter disabled. [ 0.384416] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.385887] iommu: Default domain type: Translated [ 0.385959] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.386355] SCSI subsystem initialized [ 0.386506] usbcore: registered new interface driver usbfs [ 0.386555] usbcore: registered new interface driver hub [ 0.386593] usbcore: registered new device driver usb [ 0.387112] mc: Linux media interface: v0.10 [ 0.387144] videodev: Linux video capture interface: v2.00 [ 0.387488] pps_core: LinuxPPS API ver. 1 registered [ 0.387505] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.387535] PTP clock support registered [ 0.387824] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.388131] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.388228] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.388982] Registered efivars operations [ 0.393917] FPGA manager framework [ 0.394025] Advanced Linux Sound Architecture Driver Initialized. [ 0.394611] Bluetooth: Core ver 2.22 [ 0.394654] NET: Registered protocol family 31 [ 0.394671] Bluetooth: HCI device and connection manager initialized [ 0.394692] Bluetooth: HCI socket layer initialized [ 0.394712] Bluetooth: L2CAP socket layer initialized [ 0.394739] Bluetooth: SCO socket layer initialized [ 0.396644] camchar: rtcpu character device driver loaded [ 0.397393] clocksource: Switched to clocksource arch_sys_counter [ 0.682888] VFS: Disk quotas dquot_6.6.0 [ 0.682968] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.683323] pnp: PnP ACPI: disabled [ 0.694960] la/ptsa driver initialized. [ 0.695091] NET: Registered protocol family 2 [ 0.695264] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.700859] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.700939] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.701237] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.701716] TCP: Hash tables configured (established 65536 bind 65536) [ 0.701924] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.702027] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.702228] NET: Registered protocol family 1 [ 0.702929] RPC: Registered named UNIX socket transport module. [ 0.702950] RPC: Registered udp transport module. [ 0.702966] RPC: Registered tcp transport module. [ 0.702980] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.703002] PCI: CLS 0 bytes, default 64 [ 0.703240] Trying to unpack rootfs image as initramfs... [ 0.888348] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.890490] Freeing initrd memory: 8196K [ 0.894429] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.894488] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.894529] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.894942] kvm [1]: IPA Size Limit: 40 bits [ 0.895473] kvm [1]: vgic interrupt IRQ9 [ 0.896014] kvm [1]: VHE mode initialized successfully [ 0.897559] Initialise system trusted keyrings [ 0.897866] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.903519] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.904394] NFS: Registering the id_resolver key type [ 0.904436] Key type id_resolver registered [ 0.904458] Key type id_legacy registered [ 0.904551] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.904584] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.904631] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.914627] NET: Registered protocol family 38 [ 0.914656] Key type asymmetric registered [ 0.914705] Asymmetric key parser 'x509' registered [ 0.914760] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.915034] io scheduler mq-deadline registered [ 0.915059] io scheduler kyber registered [ 0.920876] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.923946] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.924036] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.924118] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.924212] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.924322] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.929988] scrncapt: init (heads:4 wins:6 planes:4) [ 0.930043] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.931171] EINJ: ACPI disabled. [ 0.934777] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.934805] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.934822] tegra-pmc: ### PMC reset level: L1 [ 0.934838] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.934888] tegra-pmc: PMC Prod config success [ 0.940064] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.945267] random: fast init done [ 0.945741] printk: console [ttyTCU0] enabled [ 2.497486] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.502099] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.506718] arm-smmu 10000000.iommu: stage 1 translation [ 2.512155] arm-smmu 10000000.iommu: stage 2 translation [ 2.517407] arm-smmu 10000000.iommu: nested translation [ 2.523013] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.529922] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.540601] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.543049] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.549608] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.557687] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.562903] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.567627] arm-smmu 12000000.iommu: stage 1 translation [ 2.572903] arm-smmu 12000000.iommu: stage 2 translation [ 2.578564] arm-smmu 12000000.iommu: nested translation [ 2.583733] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.591192] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.601540] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.604015] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.610853] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.618003] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.628018] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.631291] tegra_profiler: auth: init [ 2.635545] THERMAL EST: found 3 subdevs [ 2.638691] THERMAL EST num_resources: 0 [ 2.642788] [THERMAL EST subdev 0] [ 2.645863] [THERMAL EST subdev 1] [ 2.649527] [THERMAL EST subdev 2] [ 2.652496] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.658982] THERMAL EST: thz register success. [ 2.663209] THERMAL EST: end of probe, return err: 0 [ 2.668728] nvsciipc: loaded module [ 2.675940] tun: Universal TUN/TAP device driver, 1.6 [ 2.678138] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.684269] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.690097] e1000e: Intel(R) PRO/1000 Network Driver [ 2.694769] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.701101] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.706141] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.712268] PPP generic driver version 2.4.2 [ 2.716810] PPP BSD Compression module registered [ 2.721433] PPP Deflate Compression module registered [ 2.726626] PPP MPPE Compression module registered [ 2.731385] usbcore: registered new interface driver r8152 [ 2.737146] usbcore: registered new interface driver asix [ 2.742480] usbcore: registered new interface driver ax88179_178a [ 2.748602] usbcore: registered new interface driver cdc_ether [ 2.754304] usbcore: registered new interface driver net1080 [ 2.759908] usbcore: registered new interface driver cdc_subset [ 2.766193] usbcore: registered new interface driver zaurus [ 2.771895] usbcore: registered new interface driver cdc_ncm [ 2.777307] usbcore: registered new interface driver aqc111 [ 2.782998] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.789280] ohci-pci: OHCI PCI platform driver [ 2.793324] ohci-platform: OHCI generic platform driver [ 2.799194] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.805869] usbcore: registered new interface driver uas [ 2.809879] usbcore: registered new interface driver usb-storage [ 2.815761] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.822036] mousedev: PS/2 mouse device common for all mice [ 2.826803] usbcore: registered new interface driver xpad [ 2.835194] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.837488] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.845305] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.851844] i2c /dev entries driver [ 2.855483] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.861316] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.866679] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.871859] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.877393] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.882865] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.888013] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.901908] device-mapper: uevent: version 1.0.3 [ 2.902406] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.909027] cpuidle: Initializing cpuidle driver [ 2.912691] sdhci: Secure Digital Host Controller Interface driver [ 2.917464] sdhci: Copyright(c) Pierre Ossman [ 2.921475] Synopsys Designware Multimedia Card Interface Driver [ 2.927680] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.933651] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.934512] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.946665] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.968162] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.977682] vdd-1v0: supplied by regulator-dummy [ 2.983132] vdd-1v8-hs: supplied by regulator-dummy [ 2.988066] vdd-1v8-ls: supplied by regulator-dummy [ 2.992947] vdd-1v8-ao: supplied by regulator-dummy [ 2.996834] vddio-ddr-1v1: supplied by regulator-dummy [ 3.001342] vdd-rtc: supplied by regulator-dummy [ 3.003127] spmic-ldo1: supplied by regulator-dummy [ 3.004332] vdd-ao-3v3: supplied by regulator-dummy [ 3.010608] vddio-emmc-3v3: supplied by regulator-dummy [ 3.016883] spmic-ldo4: supplied by regulator-dummy [ 3.018143] vdd-usb-3v3: supplied by regulator-dummy [ 3.024460] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.030620] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.036218] spmic-ldo8: supplied by vdd-1v8-ls [ 3.037730] gpio-510 (gpio_default): hogged as output/high [ 3.039200] gpio-511 (gpio_default): hogged as output/high [ 3.042185] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.179464] max77686-rtc max77620-rtc: registered as rtc0 [ 3.180770] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.181109] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.009236] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.010692] hid: raw HID events driver (C) Jiri Kosina [ 4.011671] usbcore: registered new interface driver usbhid [ 4.011818] usbhid: USB HID core driver [ 4.014203] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.015432] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.138079] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.211962] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.692 ms) ÿá[ 4.099166] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.099743] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.101042] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.102389] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.104354] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.105256] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.106077] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.107593] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.107839] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.110624] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.115181] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.122396] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.127013] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.133205] denver_knobs_init:MTS_VERSION:55637613 [ 4.146059] t19x_cache tegra-cache: probed [ 4.149069] optee: probing for conduit method. [ 4.150004] optee: revision 3.16 (65cc2218) [ 4.151037] optee: dynamic shared memory is enabled [ 4.154047] optee: initialized driver [ 4.160972] nvpmodel: initialized successfully [ 4.161994] tegra_hv: get_hvd: not initialized yet [ 4.166329] user_ivc_mempool: hypervisor not present [ 4.172690] usbcore: registered new interface driver snd-usb-audio [ 4.178720] u32 classifier [ 4.180087] input device check on [ 4.183769] Actions configured [ 4.187754] Initializing XFRM netlink socket [ 4.192711] NET: Registered protocol family 10 [ 4.199495] Segment Routing with IPv6 [ 4.199815] NET: Registered protocol family 17 [ 4.204068] NET: Registered protocol family 15 [ 4.208508] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.222328] Bluetooth: RFCOMM socket layer initialized [ 4.226625] Bluetooth: RFCOMM ver 1.11 [ 4.230767] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.236370] Bluetooth: HIDP socket layer initialized [ 4.242615] 9pnet: Installing 9P2000 support [ 4.245801] Key type dns_resolver registered [ 4.251577] registered taskstats version 1 [ 4.254243] Loading compiled-in X.509 certificates [ 4.267798] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.270520] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.280857] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.282216] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.290985] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.299099] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.417542] tegra194-pcie 14160000.pcie: Link up [ 4.420508] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.420768] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.421027] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.421536] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.421879] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.422487] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.423035] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.436514] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.437006] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.437596] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.439106] pci 0004:01:00.0: supports D1 D2 [ 4.439330] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.450956] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.451281] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.451657] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.452205] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.452522] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.452745] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.452958] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.459799] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.468027] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.478190] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.482799] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.488604] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.495717] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.504194] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.505987] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.514696] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.522899] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.638239] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.638687] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.639019] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.639224] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.639699] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.639915] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.640259] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.640752] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.664244] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.664766] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.666859] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.667994] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.669643] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.671338] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.672338] pci 0005:00:00.0: Removing from iommu group 7 [ 5.672743] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.708607] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.732955] host1x 13e10000.host1x: initialized [ 5.734868] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.735812] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.737095] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.738002] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.739321] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.739979] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.741228] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.742058] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.743118] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.743808] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.748289] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.755449] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.765556] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.772204] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.782099] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.789426] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.799280] falcon 15340000.vic: Adding to iommu group 17 [ 5.813764] falcon 15340000.vic: initialized [ 5.814890] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.820481] falcon 15380000.nvjpg: initialized [ 5.821169] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.832235] falcon 154c0000.nvenc: initialized [ 5.832885] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.842101] falcon 15a80000.nvenc1: initialized [ 5.842775] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.855424] nvdec 15480000.nvdec: initialized [ 5.855944] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.865724] nvdec 15140000.nvdec1: initialized [ 5.866283] tsec 15500000.tsec: Adding to iommu group 18 [ 5.872059] tsec 15500000.tsec: initialized [ 5.872515] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.880112] tsec 15100000.tsecb: initialized [ 5.883994] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.917369] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.933215] gpio-374 (wifi-enable): hogged as output/high [ 5.933588] gpio-431 (camera-control-output-low): hogged as output/low [ 5.933884] gpio-432 (camera-control-output-low): hogged as output/low [ 5.935643] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.937895] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.938562] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.939988] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.941610] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.943441] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.947393] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.955928] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.963064] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.974126] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.979620] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.985537] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.994246] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.003642] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.010828] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.018455] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.024505] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.034426] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.040372] pva 16000000.pva0: Adding to iommu group 22 [ 6.067824] pva 16000000.pva0: initialized [ 6.072327] pva 16800000.pva1: Adding to iommu group 23 [ 6.083604] pva 16800000.pva1: initialized [ 6.088093] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.109647] nvdla 15880000.nvdla0: initialized [ 6.111127] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.127478] nvdla 158c0000.nvdla1: initialized [ 6.131582] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.131612] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.131922] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.132125] tegradc 15200000.display: Adding to iommu group 26 [ 6.132294] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.133005] tegradccommon 15200000.display-hub: dma mapping done [ 6.133523] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.135387] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.135899] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.136141] tegra_cec 3960000.tegra_cec: probed [ 6.140742] tegradc 15210000.display: Adding to iommu group 26 [ 6.140787] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.141605] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.144298] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.144740] kfuse 3830000.kfuse: initialized [ 6.145283] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.145293] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.146039] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.147132] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.153387] generic_infoframe_type: 0x87 [ 6.160704] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.165344] tegradc 15200000.display: DT parsed successfully [ 6.169822] random: crng init done [ 6.176110] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.183357] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.192760] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.199158] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.201489] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.207815] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.212544] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.213555] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.228899] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.232857] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.234044] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.241098] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.251069] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.255657] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.264992] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.273118] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.280800] tegradc 15210000.display: disp0 connected to head1->sor [ 6.287934] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.288896] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.294415] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.305047] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.305070] usb usb1: Product: xHCI Host Controller [ 6.310317] tegradc 15210000.display: DT parsed successfully [ 6.317447] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.317481] usb usb1: SerialNumber: 3610000.xhci [ 6.324806] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.333114] hub 1-0:1.0: USB hub found [ 6.409474] hub 1-0:1.0: 4 ports detected [ 6.414779] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.419058] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.426833] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.434448] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.442246] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.449409] usb usb2: Product: xHCI Host Controller [ 6.454537] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.460664] usb usb2: SerialNumber: 3610000.xhci [ 6.466278] hub 2-0:1.0: USB hub found [ 6.469012] hub 2-0:1.0: 4 ports detected [ 6.513052] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.519128] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.520684] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.520854] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.534062] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.535151] tegra194-cpufreq ccplex: probed with BWMGR [ 6.536450] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.536911] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.537431] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.538631] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.545782] tegra194-vi5 15c10000.vi: initialized [ 6.547348] mmc0: CQHCI version 5.10 [ 6.547498] tegradc 15210000.display: disp0 connected to head1->sor [ 6.548722] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.553005] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.559132] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.566272] tegradc 15210000.display: DT parsed successfully [ 6.574212] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.579829] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.580008] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.586238] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.586245] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.586250] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.593444] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.594128] generic_infoframe_type: 0x87 [ 6.600441] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.600749] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.607631] tegradc 15200000.display: DT parsed successfully [ 6.613892] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.620653] tegradc 15200000.display: Display dc.000000002c265cc2 registered with id=0 [ 6.628432] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.638842] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.651134] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.651140] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.666224] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.681594] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.681821] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.690160] nvethernet 2490000.ethernet: Macsec not supported [ 6.691556] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.698141] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.704614] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.705676] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.705832] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.705952] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.707058] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.708733] tegra-se-nvhost 15810000.se: initialized [ 6.714051] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.721419] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.727764] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.770519] tegradc 15200000.display: probed [ 6.776198] tegra-se-nvhost 15820000.se: initialized [ 6.806983] mmc0: Command Queue Engine enabled [ 6.811959] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.813726] mmc0: periodic cache flush enabled [ 6.813749] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.820629] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.825313] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.832075] tegra-se-nvhost 15830000.se: initialized [ 6.837388] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.842979] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.858442] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.860669] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.874821] Console: switching to colour frame buffer device 240x67 [ 6.875249] tegra-se-nvhost 15840000.se: initialized [ 6.880753] tegradc 15200000.display: fb registered [ 6.880851] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.881097] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.881104] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.881109] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.881112] usb 1-2: Manufacturer: Generic [ 6.883043] hub 1-2:1.0: USB hub found [ 6.884133] hub 1-2:1.0: 4 ports detected [ 6.887412] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.934758] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.936446] tegra_actmon d230000.actmon: in actmon_register()... [ 6.946410] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.946600] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.958680] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.967109] hvc_sysfs: hypervisor is not present [ 6.997158] ALSA device list: [ 6.997318] No soundcards found. [ 6.998577] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.030854] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.032294] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.032553] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.033585] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.033817] Extcon AUX1(HDMI) enable [ 7.034076] tegradc 15210000.display: disp1 connected to head1->sor [ 7.034451] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.034778] tegradc 15210000.display: DT parsed successfully [ 7.035268] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.039077] tegradc 15210000.display: Display dc.00000000815245c7 registered with id=1 [ 7.046989] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.046994] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.046998] usb 2-3: Manufacturer: Generic [ 7.057584] hub 2-3:1.0: USB hub found [ 7.062542] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.069224] hub 2-3:1.0: 4 ports detected [ 7.071487] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.078570] tegradc 15210000.display: probed [ 7.096753] tegradc 15210000.display: fb registered [ 7.104938] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.108694] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.110524] Freeing unused kernel memory: 3968K [ 7.116406] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.126485] tegradc 15210000.display: blank - powerdown [ 7.131317] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.133523] Run /init as init process [ 7.137429] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.137435] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.139822] Extcon DP: HPD disabled [ 7.153400] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.155012] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.172147] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.177852] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.200622] tegradc 15200000.display: blank - powerdown [ 7.228548] Root device found: mmcblk0p1 [ 7.230666] Found dev node: /dev/mmcblk0p1 [ 7.247922] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.247927] Extcon AUX1(HDMI) disable [ 7.267265] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.271297] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.272024] Rootfs mounted over mmcblk0p1 [ 7.272172] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.285137] tegradc 15200000.display: unblank [ 7.286245] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.286456] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.292400] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.294313] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.298350] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.298354] Extcon AUX1(HDMI) enable [ 7.301854] Switching from initrd to actual rootfs [ 7.311086] tegradc 15200000.display: sync windows ret = 247 [ 7.322656] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.344632] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.344638] usb 1-3: Product: Bluetooth Radio [ 7.344643] usb 1-3: Manufacturer: Realtek [ 7.344647] usb 1-3: SerialNumber: 00e04c000001 [ 7.353159] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.360229] Extcon HDMI: HPD enabled [ 7.363817] tegradc 15200000.display: hdmi: plugged [ 7.448164] systemd[1]: System time before build time, advancing clock. [ 7.520212] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.525128] systemd[1]: Detected architecture arm64. [ 7.566337] systemd[1]: Set hostname to . [ 7.734011] systemd-sysv-generator[243]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.083298] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.085027] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.090962] systemd[1]: Created slice system-modprobe.slice. [ 8.095561] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.099643] systemd[1]: Created slice User and Session Slice. [ 8.103046] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.107086] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.110398] systemd[1]: Reached target User and Group Name Lookups. [ 8.113585] systemd[1]: Reached target Slices. [ 8.116591] systemd[1]: Reached target Swap. [ 8.120530] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.124178] systemd[1]: Listening on Syslog Socket. [ 8.127674] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.131037] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.135338] systemd[1]: Listening on Journal Audit Socket. [ 8.138921] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.142719] systemd[1]: Listening on Journal Socket. [ 8.146330] systemd[1]: Listening on udev Control Socket. [ 8.149748] systemd[1]: Listening on udev Kernel Socket. [ 8.158228] systemd[1]: Mounting Huge Pages File System... [ 8.168017] systemd[1]: Mounting POSIX Message Queue File System... [ 8.176174] systemd[1]: Mounting RPC Pipe File System... [ 8.184782] systemd[1]: Mounting Kernel Debug File System... [ 8.193161] systemd[1]: Mounting Kernel Trace File System... [ 8.203316] systemd[1]: Starting Journal Service... [ 8.212301] systemd[1]: Starting Set the console keyboard layout... [ 8.220801] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.224406] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.231022] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.239574] systemd[1]: Started Nameserver information manager. [ 8.244302] systemd[1]: Reached target Network (Pre). [ 8.251421] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.253301] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.263373] systemd[1]: Starting Load Kernel Modules... [ 8.272108] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.280534] systemd[1]: Starting udev Coldplug all Devices... [ 8.291804] systemd[1]: Mounted Huge Pages File System. [ 8.295648] systemd[1]: Mounted POSIX Message Queue File System. [ 8.299338] systemd[1]: Mounted RPC Pipe File System. [ 8.302833] systemd[1]: Mounted Kernel Debug File System. [ 8.303171] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.308729] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.310476] systemd[1]: Mounted Kernel Trace File System. [ 8.311191] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.313412] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.313426] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.313430] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.313615] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.313836] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.313998] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.314008] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.330767] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.338063] systemd[1]: nvfb-udev.service: Succeeded. [ 8.342443] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.354451] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.367354] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.369102] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.376555] systemd[1]: Starting Load/Save Random Seed... [ 8.385984] systemd[1]: Starting Create System Users... [ 8.404544] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.404544] [ 8.432992] systemd[1]: Finished Load/Save Random Seed. [ 8.445051] systemd[1]: Finished Create System Users. [ 8.452099] systemd[1]: Finished Load Kernel Modules. [ 8.456764] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.463568] systemd[1]: Mounting Kernel Configuration File System... [ 8.472712] systemd[1]: Started OP-TEE Client Supplicant. [ 8.481262] systemd[1]: Starting Apply Kernel Variables... [ 8.489896] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.504901] systemd[1]: Finished Set the console keyboard layout. [ 8.508979] systemd[1]: Mounted Kernel Configuration File System. [ 10.044549] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.055526] imx219 9-0010: board setup failed [ 10.056907] imx219: probe of 9-0010 failed with error -121 [ 10.110388] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.117119] imx219 10-0010: board setup failed [ 10.118463] imx219: probe of 10-0010 failed with error -121 [ 10.157811] hot-surface-alert cooling state: 0 -> 1 [ 10.403130] using random self ethernet address [ 10.404254] using random host ethernet address [ 11.912610] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.913849] Creating 1 MTD partitions on "spi6.0": [ 11.914968] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.274705] using random self ethernet address [ 12.275889] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.772667] nvidia: loading out-of-tree module taints kernel. [ 57.999257] watchdog: watchdog0: watchdog did not stop! [ 58.458846] Trying to unregister non-registered hwtime source [ 61.516696] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.519312] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeÿÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.358] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.490] I> register 'maxim' power off handle [0003.494] I> virtual i2c enabled [0003.494] I> registered 'maxim,max20024' pmic [0003.495] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.495] I> Boot-device: QSPI [0003.496] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.620] E> cannot find any other nvdisp nodes [0003.636] I> edid read success [0003.649] I> edid read success [0003.649] I> width = 640, height = 480, frequency = 25174825 [0003.649] I> width = 1920, height = 1080, frequency = 148500000 [0003.650] I> width = 1280, height = 768, frequency = 79500000 [0003.650] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 720, height = 480, frequency = 26973026 [0003.688] I> width = 720, height = 576, frequency = 26973026 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 4096, height = 2160, frequency = 296703296 [0003.723] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.734] I> hdmi_enable, starting HDMI initialisation [0003.739] I> hdmi_enable, HDMI initialisation complete [0003.748] initializing target [0003.749] calling apps_init() [0003.750] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000798] Console: colour dummy device 80x25 [ 0.002289] printk: console [tty0] enabled [ 0.002358] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002412] pid_max: default: 32768 minimum: 301 [ 0.002597] LSM: Security Framework initializing [ 0.002684] Yama: becoming mindful. [ 0.002757] SELinux: Initializing. [ 0.002915] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002969] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006067] rcu: Hierarchical SRCU implementation. [ 0.006325] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007345] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007456] DTB Build time: Aug 10 2022 20:31:49 [ 0.011760] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.012079] Remapping and enabling EFI services. [ 0.014125] smp: Bringing up secondary CPUs ... [ 0.045556] Detected PIPT I-cache on CPU1 [ 0.045658] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075450] Detected PIPT I-cache on CPU2 [ 0.075594] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105156] Detected PIPT I-cache on CPU3 [ 0.105245] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135078] Detected PIPT I-cache on CPU4 [ 0.135264] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164879] Detected PIPT I-cache on CPU5 [ 0.165036] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165402] smp: Brought up 1 node, 6 CPUs [ 0.165711] SMP: Total of 6 processors activated. [ 0.165758] CPU features: detected: Privileged Access Never [ 0.165788] CPU features: detected: LSE atomic instructions [ 0.165810] CPU features: detected: User Access Override [ 0.165833] CPU features: detected: 32-bit EL0 Support [ 0.165853] CPU features: detected: RAS Extension Support [ 0.165874] CPU features: detected: CRC32 instructions [ 0.165895] CPU features: detected: 32-bit EL1 Support [ 0.234472] CPU: All CPU(s) started at EL2 [ 0.240237] devtmpfs: initialized [ 0.289588] Registered cp15_barrier emulation handler [ 0.289712] Registered setend emulation handler [ 0.289740] KASLR enabled [ 0.290016] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.290066] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291451] pinctrl core: initialized pinctrl subsystem [ 0.292687] SMBIOS 3.0.0 present. [ 0.292733] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.293424] NET: Registered protocol family 16 [ 0.295359] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295900] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296616] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296694] audit: initializing netlink subsys (disabled) [ 0.296988] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.297392] thermal_sys: Registered thermal governor 'step_wise' [ 0.297399] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297427] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299878] cpuidle: using governor menu [ 0.300233] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300732] ASID allocator initialised with 32768 entries [ 0.300954] Serial: AMBA PL011 UART driver [ 0.304125] Tegra reboot handler registered. [ 0.375558] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375768] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.376022] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376094] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376230] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376296] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376441] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.376517] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376661] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376731] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379215] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379267] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.379312] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379355] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379403] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379446] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379503] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379550] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379617] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379675] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379729] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379769] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379807] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379866] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379906] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379945] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379983] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.380097] mc-err: mcerr ops are set to t19x [ 0.391364] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391403] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.391428] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391452] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.398601] ACPI: Interpreter disabled. [ 0.399706] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400979] iommu: Default domain type: Translated [ 0.401049] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.401415] SCSI subsystem initialized [ 0.401563] usbcore: registered new interface driver usbfs [ 0.401612] usbcore: registered new interface driver hub [ 0.401652] usbcore: registered new device driver usb [ 0.402191] mc: Linux media interface: v0.10 [ 0.402228] videodev: Linux video capture interface: v2.00 [ 0.402640] pps_core: LinuxPPS API ver. 1 registered [ 0.402664] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.402700] PTP clock support registered [ 0.402976] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.403339] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.403436] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.404066] Registered efivars operations [ 0.410196] FPGA manager framework [ 0.410342] Advanced Linux Sound Architecture Driver Initialized. [ 0.410860] Bluetooth: Core ver 2.22 [ 0.410903] NET: Registered protocol family 31 [ 0.410923] Bluetooth: HCI device and connection manager initialized [ 0.410949] Bluetooth: HCI socket layer initialized [ 0.410973] Bluetooth: L2CAP socket layer initialized [ 0.411003] Bluetooth: SCO socket layer initialized [ 0.412689] camchar: rtcpu character device driver loaded [ 0.413584] clocksource: Switched to clocksource arch_sys_counter [ 0.702676] VFS: Disk quotas dquot_6.6.0 [ 0.702763] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.703140] pnp: PnP ACPI: disabled [ 0.714525] la/ptsa driver initialized. [ 0.714642] NET: Registered protocol family 2 [ 0.714845] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.720137] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.720220] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.720525] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.720986] TCP: Hash tables configured (established 65536 bind 65536) [ 0.721142] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.721245] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.721471] NET: Registered protocol family 1 [ 0.722015] RPC: Registered named UNIX socket transport module. [ 0.722040] RPC: Registered udp transport module. [ 0.722057] RPC: Registered tcp transport module. [ 0.722075] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.722110] PCI: CLS 0 bytes, default 64 [ 0.722306] Trying to unpack rootfs image as initramfs... [ 0.914272] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.916585] Freeing initrd memory: 8196K [ 0.920808] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.920855] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.920904] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.921238] kvm [1]: IPA Size Limit: 40 bits [ 0.921847] kvm [1]: vgic interrupt IRQ9 [ 0.922322] kvm [1]: VHE mode initialized successfully [ 0.923554] Initialise system trusted keyrings [ 0.923839] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.927897] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.928625] NFS: Registering the id_resolver key type [ 0.928664] Key type id_resolver registered [ 0.928682] Key type id_legacy registered [ 0.928792] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.928823] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.928882] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.937823] NET: Registered protocol family 38 [ 0.937852] Key type asymmetric registered [ 0.937871] Asymmetric key parser 'x509' registered [ 0.937924] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.938165] io scheduler mq-deadline registered [ 0.938187] io scheduler kyber registered [ 0.942945] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.945287] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.945371] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.945435] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.945527] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.945593] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.950454] scrncapt: init (heads:4 wins:6 planes:4) [ 0.950768] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.951527] EINJ: ACPI disabled. [ 0.954373] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.954412] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.954459] tegra-pmc: ### PMC reset level: L1 [ 0.954479] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.954535] tegra-pmc: PMC Prod config success [ 0.959529] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.443195] random: fast init done [ 2.510415] printk: console [ttyTCU0] enabled [ 2.516570] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.521336] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.525869] arm-smmu 10000000.iommu: stage 1 translation [ 2.531373] arm-smmu 10000000.iommu: stage 2 translation [ 2.536630] arm-smmu 10000000.iommu: nested translation [ 2.542264] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.549405] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.559270] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.562282] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.569095] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.576471] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.582140] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.586594] arm-smmu 12000000.iommu: stage 1 translation [ 2.592108] arm-smmu 12000000.iommu: stage 2 translation [ 2.597788] arm-smmu 12000000.iommu: nested translation [ 2.603246] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.610394] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.620427] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.623534] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.630083] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.637462] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.647140] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.650313] tegra_profiler: auth: init [ 2.654755] THERMAL EST: found 3 subdevs [ 2.657931] THERMAL EST num_resources: 0 [ 2.661772] [THERMAL EST subdev 0] [ 2.665062] [THERMAL EST subdev 1] [ 2.668489] [THERMAL EST subdev 2] [ 2.671747] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.678151] THERMAL EST: thz register success. [ 2.682714] THERMAL EST: end of probe, return err: 0 [ 2.688004] nvsciipc: loaded module [ 2.694793] tun: Universal TUN/TAP device driver, 1.6 [ 2.697554] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.703778] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.709116] e1000e: Intel(R) PRO/1000 Network Driver [ 2.714005] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.720342] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.725656] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.731611] PPP generic driver version 2.4.2 [ 2.735859] PPP BSD Compression module registered [ 2.740617] PPP Deflate Compression module registered [ 2.745589] PPP MPPE Compression module registered [ 2.750609] usbcore: registered new interface driver r8152 [ 2.756129] usbcore: registered new interface driver asix [ 2.761707] usbcore: registered new interface driver ax88179_178a [ 2.767578] usbcore: registered new interface driver cdc_ether [ 2.773777] usbcore: registered new interface driver net1080 [ 2.779127] usbcore: registered new interface driver cdc_subset [ 2.785425] usbcore: registered new interface driver zaurus [ 2.791165] usbcore: registered new interface driver cdc_ncm [ 2.796550] usbcore: registered new interface driver aqc111 [ 2.802299] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.808573] ohci-pci: OHCI PCI platform driver [ 2.812587] ohci-platform: OHCI generic platform driver [ 2.818669] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.825018] usbcore: registered new interface driver uas [ 2.829133] usbcore: registered new interface driver usb-storage [ 2.835261] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.840989] mousedev: PS/2 mouse device common for all mice [ 2.846290] usbcore: registered new interface driver xpad [ 2.854243] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.856728] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.864839] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.871354] i2c /dev entries driver [ 2.874412] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.880458] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.885593] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.891177] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.896493] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.901742] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.907170] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.919821] device-mapper: uevent: version 1.0.3 [ 2.920302] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.927761] cpuidle: Initializing cpuidle driver [ 2.931805] sdhci: Secure Digital Host Controller Interface driver [ 2.936612] sdhci: Copyright(c) Pierre Ossman [ 2.940446] Synopsys Designware Multimedia Card Interface Driver [ 2.946681] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.952919] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.953764] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.966134] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.985196] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.994413] vdd-1v0: supplied by regulator-dummy [ 2.999919] vdd-1v8-hs: supplied by regulator-dummy [ 3.004707] vdd-1v8-ls: supplied by regulator-dummy [ 3.009610] vdd-1v8-ao: supplied by regulator-dummy [ 3.013490] vddio-ddr-1v1: supplied by regulator-dummy [ 3.017911] vdd-rtc: supplied by regulator-dummy [ 3.019584] spmic-ldo1: supplied by regulator-dummy [ 3.020845] vdd-ao-3v3: supplied by regulator-dummy [ 3.026927] vddio-emmc-3v3: supplied by regulator-dummy [ 3.033231] spmic-ldo4: supplied by regulator-dummy [ 3.034428] vdd-usb-3v3: supplied by regulator-dummy [ 3.040567] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.046693] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.052254] spmic-ldo8: supplied by vdd-1v8-ls [ 3.053718] gpio-510 (gpio_default): hogged as output/high [ 3.055077] gpio-511 (gpio_default): hogged as output/high [ 3.060051] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.198389] max77686-rtc max77620-rtc: registered as rtc0 [ 3.199458] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.199758] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.912035] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.913038] hid: raw HID events driver (C) Jiri Kosina [ 3.913770] usbcore: registered new interface driver usbhid [ 3.913907] usbhid: USB HID core driver [ 3.915557] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.916738] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.008181] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.083674] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.303 ms) ÿá[ 4.001928] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.002531] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.003631] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.004448] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.006186] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.006800] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.007435] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.008731] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.009082] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.011226] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.018076] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.024974] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.029481] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.036799] denver_knobs_init:MTS_VERSION:55637613 [ 4.048995] t19x_cache tegra-cache: probed [ 4.051906] optee: probing for conduit method. [ 4.052711] optee: revision 3.16 (65cc2218) [ 4.053846] optee: dynamic shared memory is enabled [ 4.057041] optee: initialized driver [ 4.062852] nvpmodel: initialized successfully [ 4.064391] tegra_hv: get_hvd: not initialized yet [ 4.069122] user_ivc_mempool: hypervisor not present [ 4.075446] usbcore: registered new interface driver snd-usb-audio [ 4.081639] u32 classifier [ 4.083114] input device check on [ 4.086936] Actions configured [ 4.090398] Initializing XFRM netlink socket [ 4.095263] NET: Registered protocol family 10 [ 4.101153] Segment Routing with IPv6 [ 4.102834] NET: Registered protocol family 17 [ 4.106772] NET: Registered protocol family 15 [ 4.111440] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.124957] Bluetooth: RFCOMM socket layer initialized [ 4.129703] Bluetooth: RFCOMM ver 1.11 [ 4.133345] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.139425] Bluetooth: HIDP socket layer initialized [ 4.144990] 9pnet: Installing 9P2000 support [ 4.148633] Key type dns_resolver registered [ 4.154443] registered taskstats version 1 [ 4.156998] Loading compiled-in X.509 certificates [ 4.170160] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.172824] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.183073] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.185214] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.193735] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.202047] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.317589] tegra194-pcie 14160000.pcie: Link up [ 4.320249] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.320470] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.320622] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.320859] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.321055] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.321455] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.321937] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.334898] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.335459] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.335943] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.337405] pci 0004:01:00.0: supports D1 D2 [ 4.337727] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.346049] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.346415] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.346641] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.347102] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.347379] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.347578] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.352494] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.359600] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.368306] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.378333] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.383220] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.388652] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.395609] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.404798] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.406094] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.414487] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.422984] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.525736] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.526438] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.526676] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.526836] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.527081] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.527290] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.527707] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.528153] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.543763] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.544151] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.546196] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.547325] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.548817] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.550479] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.551299] pci 0005:00:00.0: Removing from iommu group 7 [ 5.551566] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.580691] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.600936] host1x 13e10000.host1x: initialized [ 5.602332] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.603254] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.604286] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.604968] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.606068] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.606611] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.607575] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.609320] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.619093] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.625940] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.635746] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.642917] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.652828] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.659682] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.669470] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.676782] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.686638] falcon 15340000.vic: Adding to iommu group 17 [ 5.700841] falcon 15340000.vic: initialized [ 5.702012] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.707227] falcon 15380000.nvjpg: initialized [ 5.707776] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.719550] falcon 154c0000.nvenc: initialized [ 5.720116] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.729354] falcon 15a80000.nvenc1: initialized [ 5.730118] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.741943] nvdec 15480000.nvdec: initialized [ 5.742542] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.751161] nvdec 15140000.nvdec1: initialized [ 5.751680] tsec 15500000.tsec: Adding to iommu group 18 [ 5.757467] tsec 15500000.tsec: initialized [ 5.757982] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.767200] tsec 15100000.tsecb: initialized [ 5.770756] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.793214] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.803772] gpio-374 (wifi-enable): hogged as output/high [ 5.804115] gpio-431 (camera-control-output-low): hogged as output/low [ 5.804396] gpio-432 (camera-control-output-low): hogged as output/low [ 5.806185] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.808143] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.811509] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.817888] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.823349] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.829175] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.835140] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.842690] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.850167] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.862135] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.867518] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.873054] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.881618] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.890860] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.898588] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.905759] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.911966] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.921793] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.928039] pva 16000000.pva0: Adding to iommu group 22 [ 5.953095] pva 16000000.pva0: initialized [ 5.957917] pva 16800000.pva1: Adding to iommu group 23 [ 5.968958] pva 16800000.pva1: initialized [ 5.973133] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.985842] nvdla 15880000.nvdla0: initialized [ 5.987153] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.002549] nvdla 158c0000.nvdla1: initialized [ 6.005428] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.005494] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.005864] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.006083] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.006402] tegradccommon 15200000.display-hub: dma mapping done [ 6.006853] tegradc 15200000.display: Adding to iommu group 26 [ 6.006980] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.012222] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.015788] tegradc 15210000.display: Adding to iommu group 26 [ 6.016255] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.016389] generic_infoframe_type: 0x87 [ 6.016555] tegradc 15200000.display: DT parsed successfully [ 6.016671] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.017559] tegra_cec 3960000.tegra_cec: probed [ 6.047135] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.052947] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.060285] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.060298] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.074761] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.082747] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.088453] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.095622] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.107718] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.107948] kfuse 3830000.kfuse: initialized [ 6.123318] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.128935] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.129466] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.135935] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.148965] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.149694] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.157818] tegradc 15210000.display: disp0 connected to head1->sor [ 6.165991] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.170616] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.176942] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.184053] tegradc 15210000.display: DT parsed successfully [ 6.193787] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.198090] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.212447] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.232064] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.232445] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.235725] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.244071] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.252490] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.259104] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.266870] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.274151] usb usb1: Product: xHCI Host Controller [ 6.278780] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.285059] usb usb1: SerialNumber: 3610000.xhci [ 6.291034] hub 1-0:1.0: USB hub found [ 6.293699] hub 1-0:1.0: 4 ports detected [ 6.298533] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.303329] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.310666] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.318412] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.326460] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.333747] usb usb2: Product: xHCI Host Controller [ 6.338423] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.344674] usb usb2: SerialNumber: 3610000.xhci [ 6.350484] hub 2-0:1.0: USB hub found [ 6.353149] hub 2-0:1.0: 4 ports detected [ 6.392870] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.398463] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.399616] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.399816] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.413388] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.414504] tegra194-cpufreq ccplex: probed with BWMGR [ 6.415811] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.416484] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.417014] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.418409] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.428379] tegra194-vi5 15c10000.vi: initialized [ 6.429638] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.433271] generic_infoframe_type: 0x87 [ 6.434888] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.437571] tegradc 15200000.display: DT parsed successfully [ 6.444173] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.449475] mmc0: CQHCI version 5.10 [ 6.457591] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.461073] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.467676] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.476069] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.482094] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.482100] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.489582] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.490570] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.497140] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.503260] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.503635] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.504365] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.509910] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.511206] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.517971] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.518216] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.533761] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.546746] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.553525] nvethernet 2490000.ethernet: Macsec not supported [ 6.563388] tegradc 15200000.display: probed [ 6.568943] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.590973] mmc0: Command Queue Engine enabled [ 6.593553] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.594982] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.595102] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.595284] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.599189] mmc0: periodic cache flush enabled [ 6.599208] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.603306] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.605172] tegra-se-nvhost 15810000.se: initialized [ 6.612051] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.669529] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.669648] Console: switching to colour frame buffer device 240x67 [ 6.674335] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.676175] tegradc 15200000.display: fb registered [ 6.682588] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.684565] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.688662] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.694916] tegra-se-nvhost 15820000.se: initialized [ 6.700953] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.709814] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.713769] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.719305] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.743429] tegra-se-nvhost 15830000.se: initialized [ 6.748757] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.754764] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.761056] tegra-se-nvhost 15840000.se: initialized [ 6.766777] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.772683] tegra_actmon d230000.actmon: in actmon_register()... [ 6.773074] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.777670] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.785817] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.785882] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.794813] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.801715] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.808162] hvc_sysfs: hypervisor is not present [ 6.815465] usb 1-2: Manufacturer: Generic [ 6.828729] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.831044] hub 1-2:1.0: USB hub found [ 6.836555] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.849435] hub 1-2:1.0: 4 ports detected [ 6.877006] ALSA device list: [ 6.877103] No soundcards found. [ 6.878073] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.878261] Extcon AUX1(HDMI) enable [ 6.878506] tegradc 15210000.display: disp1 connected to head1->sor [ 6.878917] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.883191] tegradc 15210000.display: DT parsed successfully [ 6.888584] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.890396] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.896610] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.910395] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.923358] tegradc 15210000.display: probed [ 6.923703] tegradc 15210000.display: fb registered [ 6.928809] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.933004] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.933669] Freeing unused kernel memory: 3968K [ 6.939073] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.939081] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.939085] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.939089] usb 2-3: Manufacturer: Generic [ 6.940762] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.949712] hub 2-3:1.0: USB hub found [ 6.961011] Run /init as init process [ 6.967452] hub 2-3:1.0: 4 ports detected [ 6.986830] tegradc 15210000.display: blank - powerdown [ 6.991961] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.991965] Extcon DP: HPD disabled [ 6.991969] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.992000] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.016532] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.023549] tegradc 15200000.display: blank - powerdown [ 7.051224] Root device found: mmcblk0p1 [ 7.053196] Found dev node: /dev/mmcblk0p1 [ 7.061568] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.061591] Extcon AUX1(HDMI) disable [ 7.065548] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.084909] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.085842] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.088748] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.092769] Rootfs mounted over mmcblk0p1 [ 7.099230] tegradc 15200000.display: unblank [ 7.100482] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.100679] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.106886] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.108890] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.112942] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.112946] Extcon AUX1(HDMI) enable [ 7.113595] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.125674] tegradc 15200000.display: sync windows ret = 246 [ 7.133430] Switching from initrd to actual rootfs [ 7.158989] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.160532] Extcon HDMI: HPD enabled [ 7.162434] tegradc 15200000.display: hdmi: plugged [ 7.178124] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.179655] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.214691] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.216289] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.217826] usb 1-3: Product: Bluetooth Radio [ 7.219243] usb 1-3: Manufacturer: Realtek [ 7.220579] usb 1-3: SerialNumber: 00e04c000001 [ 7.330217] systemd[1]: System time before build time, advancing clock. [ 7.402690] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.407771] systemd[1]: Detected architecture arm64. [ 7.462360] systemd[1]: Set hostname to . [ 7.628049] systemd-sysv-generator[241]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.984673] random: systemd: uninitialized urandom read (16 bytes read) [ 7.986567] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.988287] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.994451] systemd[1]: Created slice system-modprobe.slice. [ 7.998033] random: systemd: uninitialized urandom read (16 bytes read) [ 8.000723] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.003959] random: systemd: uninitialized urandom read (16 bytes read) [ 8.006709] systemd[1]: Created slice User and Session Slice. [ 8.010396] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.014867] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.018446] systemd[1]: Reached target User and Group Name Lookups. [ 8.021854] systemd[1]: Reached target Slices. [ 8.025142] systemd[1]: Reached target Swap. [ 8.029333] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.033197] systemd[1]: Listening on Syslog Socket. [ 8.037001] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.040634] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.046589] systemd[1]: Listening on Journal Audit Socket. [ 8.051953] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.055931] systemd[1]: Listening on Journal Socket. [ 8.059905] systemd[1]: Listening on udev Control Socket. [ 8.063579] systemd[1]: Listening on udev Kernel Socket. [ 8.072323] systemd[1]: Mounting Huge Pages File System... [ 8.081091] systemd[1]: Mounting POSIX Message Queue File System... [ 8.089302] systemd[1]: Mounting RPC Pipe File System... [ 8.098335] systemd[1]: Mounting Kernel Debug File System... [ 8.107089] systemd[1]: Mounting Kernel Trace File System... [ 8.117142] systemd[1]: Starting Journal Service... [ 8.126601] systemd[1]: Starting Set the console keyboard layout... [ 8.135417] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.139273] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.146187] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.154684] systemd[1]: Started Nameserver information manager. [ 8.159340] systemd[1]: Reached target Network (Pre). [ 8.167424] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.169462] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.176635] systemd[1]: Starting Load Kernel Modules... [ 8.184614] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.192836] systemd[1]: Starting udev Coldplug all Devices... [ 8.204084] systemd[1]: Mounted Huge Pages File System. [ 8.208028] systemd[1]: Mounted POSIX Message Queue File System. [ 8.211996] systemd[1]: Mounted RPC Pipe File System. [ 8.215385] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.217937] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.220369] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.221940] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.223100] systemd[1]: Mounted Kernel Debug File System. [ 8.223431] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.226401] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.228081] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.228328] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.228510] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.228517] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.242379] systemd[1]: Mounted Kernel Trace File System. [ 8.252697] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.259033] systemd[1]: nvfb-udev.service: Succeeded. [ 8.263788] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.276349] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.289441] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.291300] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.298998] systemd[1]: Starting Load/Save Random Seed... [ 8.308664] systemd[1]: Starting Create System Users... [ 8.336399] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.336399] [ 8.372574] systemd[1]: Finished Load Kernel Modules. [ 8.385428] systemd[1]: Finished Create System Users. [ 8.392531] systemd[1]: Finished Set the console keyboard layout. [ 8.397103] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.403752] systemd[1]: Mounting Kernel Configuration File System... [ 8.411809] systemd[1]: Started OP-TEE Client Supplicant. [ 8.420438] systemd[1]: Starting Apply Kernel Variables... [ 8.428445] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.439251] systemd[1]: Mounted Kernel Configuration File System. [ 9.749456] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.757553] imx219 9-0010: board setup failed [ 9.759016] imx219: probe of 9-0010 failed with error -121 [ 9.777555] random: crng init done [ 9.778881] random: 7 urandom warning(s) missed due to ratelimiting [ 9.789946] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.796541] imx219 10-0010: board setup failed [ 9.798047] imx219: probe of 10-0010 failed with error -121 [ 9.868141] hot-surface-alert cooling state: 0 -> 1 [ 11.084114] using random self ethernet address [ 11.085361] using random host ethernet address [ 11.304304] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.306078] Creating 1 MTD partitions on "spi6.0": [ 11.307719] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.357313] using random self ethernet address [ 12.359177] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.770008] nvidia: loading out-of-tree module taints kernel. [ 58.507137] watchdog: watchdog0: watchdog did not stop! [ 58.970484] Trying to unregister non-registered hwtime source [ 62.027596] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.029112] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿänalÿâadc initialized ÿä ÿâfmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration mighÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿät be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.469] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.475] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> hdmi cable connected [0003.610] W> set volts not configured for 'vdd-1v0' [0003.614] W> set volts not configured for 'vdd-1v8-hs' [0003.615] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.650] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.750] initializing target [0003.751] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000735] Console: colour dummy device 80x25 [ 0.002236] printk: console [tty0] enabled [ 0.002302] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002349] pid_max: default: 32768 minimum: 301 [ 0.002587] LSM: Security Framework initializing [ 0.002646] Yama: becoming mindful. [ 0.002689] SELinux: Initializing. [ 0.002884] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002930] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006015] rcu: Hierarchical SRCU implementation. [ 0.006316] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007080] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007148] DTB Build time: Aug 10 2022 20:31:49 [ 0.010348] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010639] Remapping and enabling EFI services. [ 0.012673] smp: Bringing up secondary CPUs ... [ 0.041925] Detected PIPT I-cache on CPU1 [ 0.042027] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073206] Detected PIPT I-cache on CPU2 [ 0.073360] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103025] Detected PIPT I-cache on CPU3 [ 0.103118] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132910] Detected PIPT I-cache on CPU4 [ 0.133023] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162728] Detected PIPT I-cache on CPU5 [ 0.162878] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163354] smp: Brought up 1 node, 6 CPUs [ 0.163659] SMP: Total of 6 processors activated. [ 0.163717] CPU features: detected: Privileged Access Never [ 0.163753] CPU features: detected: LSE atomic instructions [ 0.163777] CPU features: detected: User Access Override [ 0.163800] CPU features: detected: 32-bit EL0 Support [ 0.163822] CPU features: detected: RAS Extension Support [ 0.163844] CPU features: detected: CRC32 instructions [ 0.163866] CPU features: detected: 32-bit EL1 Support [ 0.231212] CPU: All CPU(s) started at EL2 [ 0.237591] devtmpfs: initialized [ 0.308684] Registered cp15_barrier emulation handler [ 0.308789] Registered setend emulation handler [ 0.308822] KASLR enabled [ 0.309199] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.309260] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.311369] pinctrl core: initialized pinctrl subsystem [ 0.312466] SMBIOS 3.0.0 present. [ 0.312545] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.313454] NET: Registered protocol family 16 [ 0.316327] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.317091] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.317854] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.317951] audit: initializing netlink subsys (disabled) [ 0.318287] audit: type=2000 audit(0.316:1): state=initialized audit_enabled=0 res=1 [ 0.318868] thermal_sys: Registered thermal governor 'step_wise' [ 0.318877] thermal_sys: Registered thermal governor 'power_allocator' [ 0.318916] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.322657] cpuidle: using governor menu [ 0.323240] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.323714] ASID allocator initialised with 32768 entries [ 0.324040] Serial: AMBA PL011 UART driver [ 0.327975] Tegra reboot handler registered. [ 0.397975] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.398103] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.398291] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.398336] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.398525] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.398571] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.398725] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.398768] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.398900] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.398942] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.401236] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.401275] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.401306] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.401336] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.401367] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.401396] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.401435] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.401470] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.401513] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.401540] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.401583] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.401633] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.401660] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.401686] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.401711] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.401737] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.401762] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.401854] mc-err: mcerr ops are set to t19x [ 0.413160] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.413251] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.413266] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.413279] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.419575] ACPI: Interpreter disabled. [ 0.420683] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.421971] iommu: Default domain type: Translated [ 0.422033] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.422397] SCSI subsystem initialized [ 0.422552] usbcore: registered new interface driver usbfs [ 0.422598] usbcore: registered new interface driver hub [ 0.422631] usbcore: registered new device driver usb [ 0.423125] mc: Linux media interface: v0.10 [ 0.423167] videodev: Linux video capture interface: v2.00 [ 0.423469] pps_core: LinuxPPS API ver. 1 registered [ 0.423482] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.423503] PTP clock support registered [ 0.423709] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.424005] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.424111] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.424704] Registered efivars operations [ 0.429987] FPGA manager framework [ 0.430107] Advanced Linux Sound Architecture Driver Initialized. [ 0.430633] Bluetooth: Core ver 2.22 [ 0.430674] NET: Registered protocol family 31 [ 0.430698] Bluetooth: HCI device and connection manager initialized [ 0.430714] Bluetooth: HCI socket layer initialized [ 0.430726] Bluetooth: L2CAP socket layer initialized [ 0.430750] Bluetooth: SCO socket layer initialized [ 0.432145] camchar: rtcpu character device driver loaded [ 0.432718] clocksource: Switched to clocksource arch_sys_counter [ 0.733830] VFS: Disk quotas dquot_6.6.0 [ 0.733926] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.734222] pnp: PnP ACPI: disabled [ 0.745105] la/ptsa driver initialized. [ 0.745223] NET: Registered protocol family 2 [ 0.745426] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.751111] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.751184] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.751512] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.751946] TCP: Hash tables configured (established 65536 bind 65536) [ 0.752077] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.752173] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.752407] NET: Registered protocol family 1 [ 0.753281] RPC: Registered named UNIX socket transport module. [ 0.753309] RPC: Registered udp transport module. [ 0.753324] RPC: Registered tcp transport module. [ 0.753337] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.753360] PCI: CLS 0 bytes, default 64 [ 0.753650] Trying to unpack rootfs image as initramfs... [ 1.022803] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.026275] Freeing initrd memory: 8196K [ 1.030900] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.030937] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.030972] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.031357] kvm [1]: IPA Size Limit: 40 bits [ 1.031905] kvm [1]: vgic interrupt IRQ9 [ 1.032482] kvm [1]: VHE mode initialized successfully [ 1.034040] Initialise system trusted keyrings [ 1.034376] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.041007] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.041917] NFS: Registering the id_resolver key type [ 1.041963] Key type id_resolver registered [ 1.041978] Key type id_legacy registered [ 1.042101] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.042127] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.042190] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.054822] NET: Registered protocol family 38 [ 1.054877] Key type asymmetric registered [ 1.054893] Asymmetric key parser 'x509' registered [ 1.054943] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.055243] io scheduler mq-deadline registered [ 1.055264] io scheduler kyber registered [ 1.061362] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.064500] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.064590] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.064667] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.064786] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.064864] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.070799] scrncapt: init (heads:4 wins:6 planes:4) [ 1.070823] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.072086] EINJ: ACPI disabled. [ 1.075524] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.075553] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.075568] tegra-pmc: ### PMC reset level: L1 [ 1.075582] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.075629] tegra-pmc: PMC Prod config success [ 1.080999] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.106578] random: fast init done [ 1.109715] printk: console [ttyTCU0] enabled [ 2.638745] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.643226] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.648015] arm-smmu 10000000.iommu: stage 1 translation [ 2.653511] arm-smmu 10000000.iommu: stage 2 translation [ 2.659030] arm-smmu 10000000.iommu: nested translation [ 2.664381] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.671540] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.681756] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.684394] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.691260] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.698567] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.704292] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.708999] arm-smmu 12000000.iommu: stage 1 translation [ 2.714504] arm-smmu 12000000.iommu: stage 2 translation [ 2.719667] arm-smmu 12000000.iommu: nested translation [ 2.725094] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.732531] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.742604] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.745662] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.751955] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.759566] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.769551] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.772608] tegra_profiler: auth: init [ 2.776663] THERMAL EST: found 3 subdevs [ 2.780079] THERMAL EST num_resources: 0 [ 2.784158] [THERMAL EST subdev 0] [ 2.787222] [THERMAL EST subdev 1] [ 2.790630] [THERMAL EST subdev 2] [ 2.794136] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.800585] THERMAL EST: thz register success. [ 2.804850] THERMAL EST: end of probe, return err: 0 [ 2.810165] nvsciipc: loaded module [ 2.816813] tun: Universal TUN/TAP device driver, 1.6 [ 2.819540] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.825906] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.831216] e1000e: Intel(R) PRO/1000 Network Driver [ 2.836394] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.842485] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.847505] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.854076] PPP generic driver version 2.4.2 [ 2.857953] PPP BSD Compression module registered [ 2.862487] PPP Deflate Compression module registered [ 2.867722] PPP MPPE Compression module registered [ 2.872770] usbcore: registered new interface driver r8152 [ 2.878263] usbcore: registered new interface driver asix [ 2.883851] usbcore: registered new interface driver ax88179_178a [ 2.889970] usbcore: registered new interface driver cdc_ether [ 2.895678] usbcore: registered new interface driver net1080 [ 2.901252] usbcore: registered new interface driver cdc_subset [ 2.907601] usbcore: registered new interface driver zaurus [ 2.913251] usbcore: registered new interface driver cdc_ncm [ 2.918664] usbcore: registered new interface driver aqc111 [ 2.924637] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.930421] ohci-pci: OHCI PCI platform driver [ 2.934961] ohci-platform: OHCI generic platform driver [ 2.940504] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.946823] usbcore: registered new interface driver uas [ 2.950998] usbcore: registered new interface driver usb-storage [ 2.957327] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.963079] mousedev: PS/2 mouse device common for all mice [ 2.968434] usbcore: registered new interface driver xpad [ 2.976047] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.978933] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.986676] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.993190] i2c /dev entries driver [ 2.996521] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.002335] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.007938] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.013309] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.018425] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.024212] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.029376] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.044152] device-mapper: uevent: version 1.0.3 [ 3.044787] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.050001] cpuidle: Initializing cpuidle driver [ 3.054154] sdhci: Secure Digital Host Controller Interface driver [ 3.058785] sdhci: Copyright(c) Pierre Ossman [ 3.062836] Synopsys Designware Multimedia Card Interface Driver [ 3.068851] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.074870] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.075726] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.088328] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.110106] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.120137] vdd-1v0: supplied by regulator-dummy [ 3.125711] vdd-1v8-hs: supplied by regulator-dummy [ 3.130613] vdd-1v8-ls: supplied by regulator-dummy [ 3.135528] vdd-1v8-ao: supplied by regulator-dummy [ 3.139585] vddio-ddr-1v1: supplied by regulator-dummy [ 3.144153] vdd-rtc: supplied by regulator-dummy [ 3.146163] spmic-ldo1: supplied by regulator-dummy [ 3.147394] vdd-ao-3v3: supplied by regulator-dummy [ 3.153711] vddio-emmc-3v3: supplied by regulator-dummy [ 3.160127] spmic-ldo4: supplied by regulator-dummy [ 3.161487] vdd-usb-3v3: supplied by regulator-dummy [ 3.167723] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.174021] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.179736] spmic-ldo8: supplied by vdd-1v8-ls [ 3.181320] gpio-510 (gpio_default): hogged as output/high [ 3.182785] gpio-511 (gpio_default): hogged as output/high [ 3.185888] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.322155] max77686-rtc max77620-rtc: registered as rtc0 [ 3.323544] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.323921] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.183064] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.184559] hid: raw HID events driver (C) Jiri Kosina [ 4.185444] usbcore: registered new interface driver usbhid [ 4.185598] usbhid: USB HID core driver [ 4.187822] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.189211] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.043695] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.117719] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.832 ms) ÿá[ 4.273747] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.274586] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.276260] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.277575] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.280078] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.281176] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.281865] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.283552] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.283949] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.286573] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.290073] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.296436] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.302308] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.307892] denver_knobs_init:MTS_VERSION:55637613 [ 4.320434] t19x_cache tegra-cache: probed [ 4.325517] optee: probing for conduit method. [ 4.326420] optee: revision 3.16 (65cc2218) [ 4.327682] optee: dynamic shared memory is enabled [ 4.329079] optee: initialized driver [ 4.334940] nvpmodel: initialized successfully [ 4.335526] tegra_hv: get_hvd: not initialized yet [ 4.340288] user_ivc_mempool: hypervisor not present [ 4.346577] usbcore: registered new interface driver snd-usb-audio [ 4.352922] u32 classifier [ 4.354167] input device check on [ 4.357929] Actions configured [ 4.361457] Initializing XFRM netlink socket [ 4.366223] NET: Registered protocol family 10 [ 4.373094] Segment Routing with IPv6 [ 4.373790] NET: Registered protocol family 17 [ 4.377788] NET: Registered protocol family 15 [ 4.382447] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.396009] Bluetooth: RFCOMM socket layer initialized [ 4.400793] Bluetooth: RFCOMM ver 1.11 [ 4.404337] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.410512] Bluetooth: HIDP socket layer initialized [ 4.416501] 9pnet: Installing 9P2000 support [ 4.419923] Key type dns_resolver registered [ 4.425434] registered taskstats version 1 [ 4.428086] Loading compiled-in X.509 certificates [ 4.442504] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.444080] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.454742] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.456029] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.465053] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.473231] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.588935] tegra194-pcie 14160000.pcie: Link up [ 4.592067] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.592308] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.592483] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.592697] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.593058] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.593488] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.593955] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.607073] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.607570] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.608075] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.609807] pci 0004:01:00.0: supports D1 D2 [ 4.610026] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.622704] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.623039] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.623314] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.623836] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.624245] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.624481] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.624962] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.631000] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.639692] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.650617] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.654622] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.660475] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.666854] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.677795] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.678120] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.686191] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.694332] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.809778] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.810651] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.810890] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.811041] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.811395] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.811674] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.812107] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.812607] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.835296] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.835687] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.838204] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.839923] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.842060] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.844085] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.845731] pci 0005:00:00.0: Removing from iommu group 7 [ 5.846153] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.883974] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.910147] host1x 13e10000.host1x: initialized [ 5.911996] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.913419] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.914622] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.915483] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.916551] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.917763] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.919046] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.919815] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.921048] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.921902] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.922993] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.927035] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.936963] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.943786] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.953839] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.961008] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.970621] falcon 15340000.vic: Adding to iommu group 17 [ 5.985257] falcon 15340000.vic: initialized [ 5.986348] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.991568] falcon 15380000.nvjpg: initialized [ 5.992107] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.004679] falcon 154c0000.nvenc: initialized [ 6.005472] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.013701] falcon 15a80000.nvenc1: initialized [ 6.014381] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.026266] nvdec 15480000.nvdec: initialized [ 6.026969] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.036610] nvdec 15140000.nvdec1: initialized [ 6.037286] tsec 15500000.tsec: Adding to iommu group 18 [ 6.043390] tsec 15500000.tsec: initialized [ 6.044046] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.051694] tsec 15100000.tsecb: initialized [ 6.055629] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.081207] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.094116] gpio-374 (wifi-enable): hogged as output/high [ 6.094475] gpio-431 (camera-control-output-low): hogged as output/low [ 6.094829] gpio-432 (camera-control-output-low): hogged as output/low [ 6.096666] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.098520] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.099065] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.102193] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.107865] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.113348] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.118999] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.127497] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.134571] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.146748] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.151244] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.157119] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.165721] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.174944] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.182482] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.190136] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.196301] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.205705] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.212251] pva 16000000.pva0: Adding to iommu group 22 [ 6.238923] pva 16000000.pva0: initialized [ 6.245017] pva 16800000.pva1: Adding to iommu group 23 [ 6.257875] pva 16800000.pva1: initialized [ 6.262663] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.275956] nvdla 15880000.nvdla0: initialized [ 6.277464] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.286472] nvdla 158c0000.nvdla1: initialized [ 6.289270] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.289689] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.290581] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.290746] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.290814] tegradc 15200000.display: Adding to iommu group 26 [ 6.290987] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.291857] tegradccommon 15200000.display-hub: dma mapping done [ 6.293310] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.299754] tegradc 15210000.display: Adding to iommu group 26 [ 6.300068] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.300235] generic_infoframe_type: 0x87 [ 6.300339] tegradc 15200000.display: DT parsed successfully [ 6.300418] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.301228] tegra_cec 3960000.tegra_cec: probed [ 6.302656] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.305434] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.305446] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.305453] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.306440] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.306458] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.307697] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.314424] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.320675] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.326278] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.332497] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.337071] kfuse 3830000.kfuse: initialized [ 6.345704] tegradc 15210000.display: disp0 connected to head1->sor [ 6.351265] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.359318] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.366249] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.367141] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.372708] tegradc 15210000.display: DT parsed successfully [ 6.379567] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.389425] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.397015] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.482136] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.491404] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.496701] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.516916] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.517397] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.519561] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.528004] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.536484] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.543388] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.550971] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.557868] usb usb1: Product: xHCI Host Controller [ 6.563108] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.569409] usb usb1: SerialNumber: 3610000.xhci [ 6.575006] hub 1-0:1.0: USB hub found [ 6.577802] hub 1-0:1.0: 4 ports detected [ 6.582486] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.587387] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.594969] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.602770] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.610291] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.617788] usb usb2: Product: xHCI Host Controller [ 6.622558] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.628795] usb usb2: SerialNumber: 3610000.xhci [ 6.634076] hub 2-0:1.0: USB hub found [ 6.637536] hub 2-0:1.0: 4 ports detected [ 6.680392] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.686415] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.687601] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.687784] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.701251] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.702328] tegra194-cpufreq ccplex: probed with BWMGR [ 6.703561] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.703985] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.704392] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.705796] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.711506] tegra194-vi5 15c10000.vi: initialized [ 6.712962] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.714446] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.715536] mmc0: CQHCI version 5.10 [ 6.717388] generic_infoframe_type: 0x87 [ 6.717428] tegradc 15200000.display: DT parsed successfully [ 6.723894] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.727267] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.731209] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.744895] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.752876] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.759604] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.759608] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.790951] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.791319] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.797126] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.803329] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.803655] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.816792] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.824176] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.830321] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.830329] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.842019] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.848772] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.854731] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.877113] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.878744] tegradc 15200000.display: probed [ 6.888795] nvethernet 2490000.ethernet: Macsec not supported [ 6.896333] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.903759] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.908159] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.909133] mmc0: Command Queue Engine enabled [ 6.915639] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.919660] mmc0: periodic cache flush enabled [ 6.928001] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.931067] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.943875] Console: switching to colour frame buffer device 240x67 [ 6.944283] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.950033] tegradc 15200000.display: fb registered [ 6.950111] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.954840] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.972665] tegra-se-nvhost 15810000.se: initialized [ 6.973238] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.982197] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.983279] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.986291] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.989623] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.010281] tegra-se-nvhost 15820000.se: initialized [ 7.016438] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.021234] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.027327] tegra-se-nvhost 15830000.se: initialized [ 7.033039] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.038459] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.045232] tegra-se-nvhost 15840000.se: initialized [ 7.049178] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.051249] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.052565] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.052572] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.052576] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.052580] usb 1-2: Manufacturer: Generic [ 7.054734] hub 1-2:1.0: USB hub found [ 7.055794] hub 1-2:1.0: 4 ports detected [ 7.059109] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.066068] tegra_actmon d230000.actmon: in actmon_register()... [ 7.072694] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.073344] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.080282] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.084843] Extcon AUX1(HDMI) enable [ 7.084980] tegradc 15210000.display: disp1 connected to head1->sor [ 7.089025] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.092941] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.097261] hvc_sysfs: hypervisor is not present [ 7.104607] tegradc 15210000.display: DT parsed successfully [ 7.137871] ALSA device list: [ 7.140517] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.148380] No soundcards found. [ 7.180681] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.186784] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.197719] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.203213] tegradc 15210000.display: probed [ 7.205198] tegradc 15210000.display: fb registered [ 7.213771] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.217021] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.218594] Freeing unused kernel memory: 3968K [ 7.224919] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.235289] tegradc 15200000.display: blank - powerdown [ 7.240869] Run /init as init process [ 7.249269] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.249275] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.249300] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.249305] usb 2-3: Manufacturer: Generic [ 7.260087] hub 2-3:1.0: USB hub found [ 7.261919] hub 2-3:1.0: 4 ports detected [ 7.282924] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.282928] Extcon AUX1(HDMI) disable [ 7.306289] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.307179] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.318903] tegradc 15200000.display: unblank [ 7.319952] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.320147] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.326108] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.328007] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.328765] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.328771] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.332044] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.332050] Extcon AUX1(HDMI) enable [ 7.344806] tegradc 15200000.display: sync windows ret = 246 [ 7.372770] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.387343] tegradc 15210000.display: blank - powerdown [ 7.392468] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.392472] Extcon DP: HPD disabled [ 7.392476] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.392490] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.392504] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.424303] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.431498] Extcon HDMI: HPD enabled [ 7.434897] tegradc 15200000.display: hdmi: plugged [ 7.454201] Root device found: mmcblk0p1 [ 7.457714] Found dev node: /dev/mmcblk0p1 [ 7.494084] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.499467] Rootfs mounted over mmcblk0p1 [ 7.536314] Switching from initrd to actual rootfs [ 7.537901] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.539366] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.540790] usb 1-3: Product: Bluetooth Radio [ 7.542141] usb 1-3: Manufacturer: Realtek [ 7.543450] usb 1-3: SerialNumber: 00e04c000001 [ 7.607760] random: crng init done [ 7.696570] systemd[1]: System time before build time, advancing clock. [ 7.769098] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.774086] systemd[1]: Detected architecture arm64. [ 7.813029] systemd[1]: Set hostname to . [ 7.986087] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.339562] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.341335] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.347877] systemd[1]: Created slice system-modprobe.slice. [ 8.352890] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.357085] systemd[1]: Created slice User and Session Slice. [ 8.360535] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.364674] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.368137] systemd[1]: Reached target User and Group Name Lookups. [ 8.371403] systemd[1]: Reached target Slices. [ 8.374471] systemd[1]: Reached target Swap. [ 8.378500] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.382193] systemd[1]: Listening on Syslog Socket. [ 8.385764] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.389188] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.395048] systemd[1]: Listening on Journal Audit Socket. [ 8.399631] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.403680] systemd[1]: Listening on Journal Socket. [ 8.407469] systemd[1]: Listening on udev Control Socket. [ 8.411065] systemd[1]: Listening on udev Kernel Socket. [ 8.419646] systemd[1]: Mounting Huge Pages File System... [ 8.428138] systemd[1]: Mounting POSIX Message Queue File System... [ 8.436244] systemd[1]: Mounting RPC Pipe File System... [ 8.444664] systemd[1]: Mounting Kernel Debug File System... [ 8.453098] systemd[1]: Mounting Kernel Trace File System... [ 8.462851] systemd[1]: Starting Journal Service... [ 8.471763] systemd[1]: Starting Set the console keyboard layout... [ 8.479786] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.483399] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.489739] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.498088] systemd[1]: Started Nameserver information manager. [ 8.503190] systemd[1]: Reached target Network (Pre). [ 8.510916] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.512931] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.521627] systemd[1]: Starting Load Kernel Modules... [ 8.529382] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.538012] systemd[1]: Starting udev Coldplug all Devices... [ 8.548103] systemd[1]: Mounted Huge Pages File System. [ 8.551996] systemd[1]: Mounted POSIX Message Queue File System. [ 8.556819] systemd[1]: Mounted RPC Pipe File System. [ 8.559140] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.564244] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.564565] systemd[1]: Mounted Kernel Debug File System. [ 8.566244] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.568877] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.568892] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.568896] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.569079] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.570774] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.576868] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.576881] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.582295] systemd[1]: Mounted Kernel Trace File System. [ 8.588667] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.593471] systemd[1]: nvfb-udev.service: Succeeded. [ 8.598039] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.611765] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.616838] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.618603] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.632592] systemd[1]: Starting Load/Save Random Seed... [ 8.640314] systemd[1]: Starting Create System Users... [ 8.681428] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.681428] [ 8.687956] systemd[1]: Finished Load/Save Random Seed. [ 8.700882] systemd[1]: Finished Create System Users. [ 8.709286] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.717299] systemd[1]: Finished Load Kernel Modules. [ 8.721764] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.728471] systemd[1]: Mounting Kernel Configuration File System... [ 8.738059] systemd[1]: Started OP-TEE Client Supplicant. [ 8.746374] systemd[1]: Starting Apply Kernel Variables... [ 8.756883] systemd[1]: Finished Set the console keyboard layout. [ 8.761193] systemd[1]: Mounted Kernel Configuration File System. [ 8.767757] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.771822] systemd[1]: Reached target Local File Systems (Pre). [ 8.775259] systemd[1]: Reached target Local File Systems. [ 10.232659] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.237946] imx219 9-0010: board setup failed [ 10.238052] imx219: probe of 9-0010 failed with error -121 [ 10.249071] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.254267] imx219 10-0010: board setup failed [ 10.293040] imx219: probe of 10-0010 failed with error -121 [ 10.303739] hot-surface-alert cooling state: 0 -> 1 [ 10.810470] using random self ethernet address [ 10.811741] using random host ethernet address [ 12.089038] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.090334] Creating 1 MTD partitions on "spi6.0": [ 12.091464] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.451926] using random self ethernet address [ 12.453090] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.853436] nvidia: loading out-of-tree module taints kernel. [ 59.310584] watchdog: watchdog0: watchdog did not stop! [ 59.761614] Trying to unregister non-registered hwtime source [ 62.820269] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.821932] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [Åÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized ÿä1ÿânoc_late initialized pm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 aÿâavfs_clk_platform_post initialized ÿäarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.211] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.263] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.321] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.330] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.379] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.388] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.417] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.427] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.636] I> edid read success [0003.648] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.649] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.650] I> width = 1360, height = 768, frequency = 85500000 [0003.650] I> width = 720, height = 480, frequency = 26973026 [0003.654] I> width = 720, height = 576, frequency = 26973026 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.688] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.748] calling apps_init() [0003.749] starting app kernel_boot_app [0003.750] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000693] Console: colour dummy device 80x25 [ 0.002167] printk: console [tty0] enabled [ 0.002236] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002271] pid_max: default: 32768 minimum: 301 [ 0.002494] LSM: Security Framework initializing [ 0.002553] Yama: becoming mindful. [ 0.002595] SELinux: Initializing. [ 0.002784] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002838] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006837] rcu: Hierarchical SRCU implementation. [ 0.007138] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007947] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.008018] DTB Build time: Aug 10 2022 20:31:49 [ 0.010581] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010819] Remapping and enabling EFI services. [ 0.012730] smp: Bringing up secondary CPUs ... [ 0.041853] Detected PIPT I-cache on CPU1 [ 0.041973] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071522] Detected PIPT I-cache on CPU2 [ 0.071620] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101173] Detected PIPT I-cache on CPU3 [ 0.101241] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130923] Detected PIPT I-cache on CPU4 [ 0.131032] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160660] Detected PIPT I-cache on CPU5 [ 0.160732] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161059] smp: Brought up 1 node, 6 CPUs [ 0.161286] SMP: Total of 6 processors activated. [ 0.161324] CPU features: detected: Privileged Access Never [ 0.161365] CPU features: detected: LSE atomic instructions [ 0.161379] CPU features: detected: User Access Override [ 0.161394] CPU features: detected: 32-bit EL0 Support [ 0.161407] CPU features: detected: RAS Extension Support [ 0.161421] CPU features: detected: CRC32 instructions [ 0.161435] CPU features: detected: 32-bit EL1 Support [ 0.228303] CPU: All CPU(s) started at EL2 [ 0.233655] devtmpfs: initialized [ 0.285601] Registered cp15_barrier emulation handler [ 0.285700] Registered setend emulation handler [ 0.285722] KASLR enabled [ 0.285971] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285998] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287406] pinctrl core: initialized pinctrl subsystem [ 0.288451] SMBIOS 3.0.0 present. [ 0.288494] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289196] NET: Registered protocol family 16 [ 0.291313] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291822] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292581] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292642] audit: initializing netlink subsys (disabled) [ 0.292951] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293337] thermal_sys: Registered thermal governor 'step_wise' [ 0.293344] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293364] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295574] cpuidle: using governor menu [ 0.295929] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296397] ASID allocator initialised with 32768 entries [ 0.296664] Serial: AMBA PL011 UART driver [ 0.300116] Tegra reboot handler registered. [ 0.369906] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.370034] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.370225] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.370271] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.370396] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.370471] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.370637] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.370678] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.370793] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.370831] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.373141] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.373177] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.373205] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.373247] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.373276] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.373303] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.373386] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.373420] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.373459] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.373483] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.373506] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.373528] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.373552] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.373574] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.373596] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.373618] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.373653] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.373761] mc-err: mcerr ops are set to t19x [ 0.385273] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.385295] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.385307] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.385319] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.391680] ACPI: Interpreter disabled. [ 0.392816] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.393998] iommu: Default domain type: Translated [ 0.394061] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.394417] SCSI subsystem initialized [ 0.394562] usbcore: registered new interface driver usbfs [ 0.394605] usbcore: registered new interface driver hub [ 0.394638] usbcore: registered new device driver usb [ 0.394993] mc: Linux media interface: v0.10 [ 0.395025] videodev: Linux video capture interface: v2.00 [ 0.395292] pps_core: LinuxPPS API ver. 1 registered [ 0.395304] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.395335] PTP clock support registered [ 0.395539] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.395867] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.395951] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.396456] Registered efivars operations [ 0.402085] FPGA manager framework [ 0.402186] Advanced Linux Sound Architecture Driver Initialized. [ 0.402768] Bluetooth: Core ver 2.22 [ 0.402810] NET: Registered protocol family 31 [ 0.402822] Bluetooth: HCI device and connection manager initialized [ 0.402842] Bluetooth: HCI socket layer initialized [ 0.402858] Bluetooth: L2CAP socket layer initialized [ 0.402898] Bluetooth: SCO socket layer initialized [ 0.404431] camchar: rtcpu character device driver loaded [ 0.405095] clocksource: Switched to clocksource arch_sys_counter [ 0.696695] VFS: Disk quotas dquot_6.6.0 [ 0.696768] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.697169] pnp: PnP ACPI: disabled [ 0.708964] la/ptsa driver initialized. [ 0.709105] NET: Registered protocol family 2 [ 0.709319] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.714503] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.714635] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.714884] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.715321] TCP: Hash tables configured (established 65536 bind 65536) [ 0.715449] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.715546] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.715785] NET: Registered protocol family 1 [ 0.716689] RPC: Registered named UNIX socket transport module. [ 0.716725] RPC: Registered udp transport module. [ 0.716744] RPC: Registered tcp transport module. [ 0.716762] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.716792] PCI: CLS 0 bytes, default 64 [ 0.717164] Trying to unpack rootfs image as initramfs... [ 0.986632] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.989878] Freeing initrd memory: 8196K [ 0.994181] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.994224] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.994262] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.994587] kvm [1]: IPA Size Limit: 40 bits [ 0.994987] kvm [1]: vgic interrupt IRQ9 [ 0.995407] kvm [1]: VHE mode initialized successfully [ 0.996833] Initialise system trusted keyrings [ 0.997189] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.003605] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.004414] NFS: Registering the id_resolver key type [ 1.004452] Key type id_resolver registered [ 1.004466] Key type id_legacy registered [ 1.004581] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.004615] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.004682] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.014352] NET: Registered protocol family 38 [ 1.014377] Key type asymmetric registered [ 1.014392] Asymmetric key parser 'x509' registered [ 1.014472] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.014745] io scheduler mq-deadline registered [ 1.014762] io scheduler kyber registered [ 1.020465] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.023365] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.023442] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.023513] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.023590] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.023657] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.029653] scrncapt: init (heads:4 wins:6 planes:4) [ 1.029717] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.030871] EINJ: ACPI disabled. [ 1.034439] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.034464] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.034478] tegra-pmc: ### PMC reset level: L1 [ 1.034524] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.034577] tegra-pmc: PMC Prod config success [ 1.040254] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.050711] random: fast init done [ 1.057495] printk: console [ttyTCU0] enabled [ 2.598088] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.602203] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.606840] arm-smmu 10000000.iommu: stage 1 translation [ 2.612644] arm-smmu 10000000.iommu: stage 2 translation [ 2.617767] arm-smmu 10000000.iommu: nested translation [ 2.623104] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.630280] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.640949] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.643403] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.650221] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.657803] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.663002] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.667726] arm-smmu 12000000.iommu: stage 1 translation [ 2.673492] arm-smmu 12000000.iommu: stage 2 translation [ 2.678661] arm-smmu 12000000.iommu: nested translation [ 2.684351] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.691535] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.701657] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.704626] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.711210] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.718312] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.728412] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.731358] tegra_profiler: auth: init [ 2.735947] THERMAL EST: found 3 subdevs [ 2.739075] THERMAL EST num_resources: 0 [ 2.743147] [THERMAL EST subdev 0] [ 2.746494] [THERMAL EST subdev 1] [ 2.749626] [THERMAL EST subdev 2] [ 2.753126] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.759642] THERMAL EST: thz register success. [ 2.763836] THERMAL EST: end of probe, return err: 0 [ 2.768916] nvsciipc: loaded module [ 2.776085] tun: Universal TUN/TAP device driver, 1.6 [ 2.778541] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.784664] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.790453] e1000e: Intel(R) PRO/1000 Network Driver [ 2.795129] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.801498] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.806757] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.813063] PPP generic driver version 2.4.2 [ 2.817216] PPP BSD Compression module registered [ 2.821470] PPP Deflate Compression module registered [ 2.826721] PPP MPPE Compression module registered [ 2.831994] usbcore: registered new interface driver r8152 [ 2.837244] usbcore: registered new interface driver asix [ 2.842583] usbcore: registered new interface driver ax88179_178a [ 2.848712] usbcore: registered new interface driver cdc_ether [ 2.854921] usbcore: registered new interface driver net1080 [ 2.860509] usbcore: registered new interface driver cdc_subset [ 2.866293] usbcore: registered new interface driver zaurus [ 2.872261] usbcore: registered new interface driver cdc_ncm [ 2.877676] usbcore: registered new interface driver aqc111 [ 2.883587] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.889403] ohci-pci: OHCI PCI platform driver [ 2.893682] ohci-platform: OHCI generic platform driver [ 2.899461] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.905922] usbcore: registered new interface driver uas [ 2.909979] usbcore: registered new interface driver usb-storage [ 2.916092] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.922384] mousedev: PS/2 mouse device common for all mice [ 2.927423] usbcore: registered new interface driver xpad [ 2.935096] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.938137] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.945652] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.952478] i2c /dev entries driver [ 2.955547] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.961560] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.966961] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.972407] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.977708] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.983182] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.988569] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.002133] device-mapper: uevent: version 1.0.3 [ 3.002606] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.008969] cpuidle: Initializing cpuidle driver [ 3.013027] sdhci: Secure Digital Host Controller Interface driver [ 3.017479] sdhci: Copyright(c) Pierre Ossman [ 3.021576] Synopsys Designware Multimedia Card Interface Driver [ 3.028021] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.033999] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.039988] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.047262] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.069979] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.079507] vdd-1v0: supplied by regulator-dummy [ 3.084953] vdd-1v8-hs: supplied by regulator-dummy [ 3.089869] vdd-1v8-ls: supplied by regulator-dummy [ 3.094739] vdd-1v8-ao: supplied by regulator-dummy [ 3.098717] vddio-ddr-1v1: supplied by regulator-dummy [ 3.103175] vdd-rtc: supplied by regulator-dummy [ 3.104980] spmic-ldo1: supplied by regulator-dummy [ 3.106193] vdd-ao-3v3: supplied by regulator-dummy [ 3.112334] vddio-emmc-3v3: supplied by regulator-dummy [ 3.118671] spmic-ldo4: supplied by regulator-dummy [ 3.119872] vdd-usb-3v3: supplied by regulator-dummy [ 3.126031] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.132183] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.137783] spmic-ldo8: supplied by vdd-1v8-ls [ 3.139339] gpio-510 (gpio_default): hogged as output/high [ 3.140761] gpio-511 (gpio_default): hogged as output/high [ 3.143722] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.279617] max77686-rtc max77620-rtc: registered as rtc0 [ 3.280689] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.281032] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.116538] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.117759] hid: raw HID events driver (C) Jiri Kosina [ 4.118595] usbcore: registered new interface driver usbhid [ 4.118737] usbhid: USB HID core driver [ 4.120732] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.122211] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.124486] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.198807] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 75.128 ms) ÿá[ 4.206759] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.207371] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.208525] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.209378] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.211228] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.211860] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.212427] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.213874] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.214115] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.216634] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.223533] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.229476] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.234555] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.240104] denver_knobs_init:MTS_VERSION:55637613 [ 4.252052] t19x_cache tegra-cache: probed [ 4.255182] optee: probing for conduit method. [ 4.256030] optee: revision 3.16 (65cc2218) [ 4.257243] optee: dynamic shared memory is enabled [ 4.261403] optee: initialized driver [ 4.269324] nvpmodel: initialized successfully [ 4.269858] tegra_hv: get_hvd: not initialized yet [ 4.273569] user_ivc_mempool: hypervisor not present [ 4.279820] usbcore: registered new interface driver snd-usb-audio [ 4.286049] u32 classifier [ 4.287329] input device check on [ 4.291147] Actions configured [ 4.295020] Initializing XFRM netlink socket [ 4.299851] NET: Registered protocol family 10 [ 4.305934] Segment Routing with IPv6 [ 4.307180] NET: Registered protocol family 17 [ 4.311196] NET: Registered protocol family 15 [ 4.315961] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.329430] Bluetooth: RFCOMM socket layer initialized [ 4.334139] Bluetooth: RFCOMM ver 1.11 [ 4.337826] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.343900] Bluetooth: HIDP socket layer initialized [ 4.349645] 9pnet: Installing 9P2000 support [ 4.353311] Key type dns_resolver registered [ 4.358493] registered taskstats version 1 [ 4.361532] Loading compiled-in X.509 certificates [ 4.375069] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.377766] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.387923] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.389751] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.398005] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.406634] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.521148] tegra194-pcie 14160000.pcie: Link up [ 4.524079] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.524260] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.524383] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.524615] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.524789] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.525264] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.525754] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.538086] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.538726] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.539183] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.540737] pci 0004:01:00.0: supports D1 D2 [ 4.540871] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.550881] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.551286] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.551483] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.551983] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.552232] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.552461] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.556069] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.563418] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.571691] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.582014] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.586554] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.592336] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.599586] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.608534] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.609929] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.618388] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.626536] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.734153] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.734885] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.735088] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.735231] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.735497] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.735687] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.736117] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.736540] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.750301] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.750554] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.752027] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.753067] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.754702] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.755937] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.756819] pci 0005:00:00.0: Removing from iommu group 7 [ 5.757421] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.791960] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.816456] host1x 13e10000.host1x: initialized [ 5.818250] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.819089] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.820248] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.820944] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.822527] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.823215] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.824480] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.825278] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.827584] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.834055] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.844373] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.851115] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.861178] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.868384] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.878317] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.885226] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.895022] falcon 15340000.vic: Adding to iommu group 17 [ 5.909589] falcon 15340000.vic: initialized [ 5.910466] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.915968] falcon 15380000.nvjpg: initialized [ 5.916566] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.928282] falcon 154c0000.nvenc: initialized [ 5.928768] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.938255] falcon 15a80000.nvenc1: initialized [ 5.938794] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.951921] nvdec 15480000.nvdec: initialized [ 5.952415] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.962584] nvdec 15140000.nvdec1: initialized [ 5.963180] tsec 15500000.tsec: Adding to iommu group 18 [ 5.969361] tsec 15500000.tsec: initialized [ 5.969831] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.975240] tsec 15100000.tsecb: initialized [ 5.979282] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.013666] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.027916] gpio-374 (wifi-enable): hogged as output/high [ 6.028207] gpio-431 (camera-control-output-low): hogged as output/low [ 6.028570] gpio-432 (camera-control-output-low): hogged as output/low [ 6.030401] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.032618] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.033482] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.035267] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.036507] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.037947] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.043651] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.052207] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.058946] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.070788] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.075512] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.081474] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.090093] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.099563] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.106654] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.114109] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.120654] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.130034] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.136278] pva 16000000.pva0: Adding to iommu group 22 [ 6.163743] pva 16000000.pva0: initialized [ 6.168682] pva 16800000.pva1: Adding to iommu group 23 [ 6.179174] random: crng init done [ 6.180072] pva 16800000.pva1: initialized [ 6.184415] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.198745] nvdla 15880000.nvdla0: initialized [ 6.200136] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.209287] nvdla 158c0000.nvdla1: initialized [ 6.212784] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.213173] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.213254] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.213669] tegradccommon 15200000.display-hub: dma mapping done [ 6.213935] tegradc 15200000.display: Adding to iommu group 26 [ 6.213969] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.218619] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.221528] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.221872] tegradc 15210000.display: Adding to iommu group 26 [ 6.224408] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.230344] generic_infoframe_type: 0x87 [ 6.235716] tegra_cec 3960000.tegra_cec: probed [ 6.241403] tegradc 15200000.display: DT parsed successfully [ 6.246460] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.250244] tegradc 15200000.display: Display dc.00000000b400afaf registered with id=0 [ 6.256265] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.265386] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.271575] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.275449] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.284238] kfuse 3830000.kfuse: initialized [ 6.290460] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.299472] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.304368] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.310928] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.311643] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.317299] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.318782] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.336198] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.346879] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.354979] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.363008] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.369612] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.377167] tegradc 15210000.display: disp0 connected to head1->sor [ 6.383428] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.391139] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.397906] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.402930] tegradc 15210000.display: DT parsed successfully [ 6.421299] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.424554] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.434334] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.447435] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.455749] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.464214] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.470872] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.478767] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.485982] usb usb1: Product: xHCI Host Controller [ 6.490693] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.496841] usb usb1: SerialNumber: 3610000.xhci [ 6.502268] hub 1-0:1.0: USB hub found [ 6.505450] hub 1-0:1.0: 4 ports detected [ 6.510285] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.514907] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.522756] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.530401] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.538100] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.545326] usb usb2: Product: xHCI Host Controller [ 6.550601] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.556766] usb usb2: SerialNumber: 3610000.xhci [ 6.562140] hub 2-0:1.0: USB hub found [ 6.564942] hub 2-0:1.0: 4 ports detected [ 6.610656] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.617632] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.619195] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.619412] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.632960] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.634088] tegra194-cpufreq ccplex: probed with BWMGR [ 6.635161] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.635734] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.636202] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.637384] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.643268] tegra194-vi5 15c10000.vi: initialized [ 6.644956] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.645221] generic_infoframe_type: 0x87 [ 6.646606] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.649385] tegradc 15200000.display: DT parsed successfully [ 6.649407] mmc0: CQHCI version 5.10 [ 6.655925] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.661366] tegradc 15200000.display: Display dc.00000000fc2022a5 registered with id=0 [ 6.665128] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.673315] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.680894] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.687150] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.695407] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.702446] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.725357] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.732587] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.737165] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.737905] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.744014] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.746208] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.750743] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.756783] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.758095] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.765972] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.782763] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.785420] tegradc 15200000.display: probed [ 6.789121] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.790135] nvethernet 2490000.ethernet: Macsec not supported [ 6.823773] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.831393] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.834006] mmc0: Command Queue Engine enabled [ 6.836104] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.840197] mmc0: periodic cache flush enabled [ 6.847905] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.851997] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.859707] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.865749] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.876178] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.876339] Console: switching to colour frame buffer device 240x67 [ 6.877860] tegra-se-nvhost 15810000.se: initialized [ 6.883240] tegradc 15200000.display: fb registered [ 6.888273] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.894318] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.894598] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.899630] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.926134] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.926420] tegra-se-nvhost 15820000.se: initialized [ 6.936312] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.938362] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.948811] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.956220] tegra-se-nvhost 15830000.se: initialized [ 6.960931] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.966296] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.972744] tegra-se-nvhost 15840000.se: initialized [ 6.976565] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.978813] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.985520] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.985525] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.985534] usb 1-2: Manufacturer: Generic [ 6.993094] tegra_actmon d230000.actmon: in actmon_register()... [ 7.013949] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.016205] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.019307] hub 1-2:1.0: USB hub found [ 7.019515] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.020208] hvc_sysfs: hypervisor is not present [ 7.044812] ALSA device list: [ 7.047803] hub 1-2:1.0: 4 ports detected [ 7.047808] No soundcards found. [ 7.048613] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.062538] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.070778] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.077396] Extcon AUX1(HDMI) enable [ 7.081205] tegradc 15210000.display: disp1 connected to head1->sor [ 7.087542] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.094721] tegradc 15210000.display: DT parsed successfully [ 7.100545] tegradc 15210000.display: Display dc.000000006630d6c2 registered with id=1 [ 7.101971] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.108675] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.121748] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.134881] tegradc 15210000.display: probed [ 7.135250] tegradc 15210000.display: fb registered [ 7.140969] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.144591] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.145193] Freeing unused kernel memory: 3968K [ 7.152402] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.162699] tegradc 15210000.display: blank - powerdown [ 7.164339] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.167818] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.176013] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.176192] Run /init as init process [ 7.184434] Extcon DP: HPD disabled [ 7.191847] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.191853] usb 2-3: Manufacturer: Generic [ 7.202971] hub 2-3:1.0: USB hub found [ 7.203391] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.209673] hub 2-3:1.0: 4 ports detected [ 7.211644] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.228450] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.266748] tegradc 15200000.display: blank - powerdown [ 7.273142] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.292510] Root device found: mmcblk0p1 [ 7.294975] Found dev node: /dev/mmcblk0p1 [ 7.301121] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.316688] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.316693] Extcon AUX1(HDMI) disable [ 7.331066] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.335455] Rootfs mounted over mmcblk0p1 [ 7.340041] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.341192] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.355158] tegradc 15200000.display: unblank [ 7.356335] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.356543] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.362893] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.364781] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.365694] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.365701] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.366416] Switching from initrd to actual rootfs [ 7.368842] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.368847] Extcon AUX1(HDMI) enable [ 7.381567] tegradc 15200000.display: sync windows ret = 246 [ 7.419442] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.422416] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.426806] Extcon HDMI: HPD enabled [ 7.426812] tegradc 15200000.display: hdmi: plugged [ 7.443616] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.450909] usb 1-3: Product: Bluetooth Radio [ 7.455171] usb 1-3: Manufacturer: Realtek [ 7.459469] usb 1-3: SerialNumber: 00e04c000001 [ 7.530552] systemd[1]: System time before build time, advancing clock. [ 7.603923] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.608743] systemd[1]: Detected architecture arm64. [ 7.656780] systemd[1]: Set hostname to . [ 7.816053] systemd-sysv-generator[253]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.160231] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.161942] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.167602] systemd[1]: Created slice system-modprobe.slice. [ 8.172135] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.176384] systemd[1]: Created slice User and Session Slice. [ 8.179729] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.183757] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.187153] systemd[1]: Reached target User and Group Name Lookups. [ 8.190340] systemd[1]: Reached target Slices. [ 8.193498] systemd[1]: Reached target Swap. [ 8.197424] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.200974] systemd[1]: Listening on Syslog Socket. [ 8.204457] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.207764] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.211889] systemd[1]: Listening on Journal Audit Socket. [ 8.215430] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.219099] systemd[1]: Listening on Journal Socket. [ 8.222752] systemd[1]: Listening on udev Control Socket. [ 8.226121] systemd[1]: Listening on udev Kernel Socket. [ 8.234446] systemd[1]: Mounting Huge Pages File System... [ 8.244218] systemd[1]: Mounting POSIX Message Queue File System... [ 8.253811] systemd[1]: Mounting RPC Pipe File System... [ 8.262783] systemd[1]: Mounting Kernel Debug File System... [ 8.271538] systemd[1]: Mounting Kernel Trace File System... [ 8.281551] systemd[1]: Starting Journal Service... [ 8.290588] systemd[1]: Starting Set the console keyboard layout... [ 8.298966] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.302440] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.308976] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.316966] systemd[1]: Started Nameserver information manager. [ 8.323361] systemd[1]: Reached target Network (Pre). [ 8.331718] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.333641] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.341390] systemd[1]: Starting Load Kernel Modules... [ 8.349133] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.357228] systemd[1]: Starting udev Coldplug all Devices... [ 8.367960] systemd[1]: Mounted Huge Pages File System. [ 8.371812] systemd[1]: Mounted POSIX Message Queue File System. [ 8.376419] systemd[1]: Mounted RPC Pipe File System. [ 8.377876] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.382343] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.384008] systemd[1]: Mounted Kernel Debug File System. [ 8.384599] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.386904] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.386916] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.386921] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.387187] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.392626] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.392796] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.395552] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.399167] systemd[1]: Mounted Kernel Trace File System. [ 8.408250] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.414339] systemd[1]: nvfb-udev.service: Succeeded. [ 8.419013] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.431462] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.436640] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.438397] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.454564] systemd[1]: Starting Load/Save Random Seed... [ 8.462986] systemd[1]: Starting Create System Users... [ 8.500342] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.500342] [ 8.518830] systemd[1]: Finished Load/Save Random Seed. [ 8.531744] systemd[1]: Finished Create System Users. [ 8.538413] systemd[1]: Finished Load Kernel Modules. [ 8.542819] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.549458] systemd[1]: Mounting Kernel Configuration File System... [ 8.557321] systemd[1]: Started OP-TEE Client Supplicant. [ 8.566706] systemd[1]: Starting Apply Kernel Variables... [ 8.574738] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.585885] systemd[1]: Finished Set the console keyboard layout. [ 8.592573] systemd[1]: Mounted Kernel Configuration File System. [ 10.099289] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.105637] imx219 9-0010: board setup failed [ 10.105748] imx219: probe of 9-0010 failed with error -121 [ 10.119412] hot-surface-alert cooling state: 0 -> 1 [ 10.134570] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.140959] imx219 10-0010: board setup failed [ 10.142205] imx219: probe of 10-0010 failed with error -121 [ 10.654585] using random self ethernet address [ 10.656290] using random host ethernet address [ 11.753281] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.755015] Creating 1 MTD partitions on "spi6.0": [ 11.756623] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.304738] using random self ethernet address [ 12.307636] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.837376] nvidia: loading out-of-tree module taints kernel. [ 59.335355] watchdog: watchdog0: watchdog did not stop! [ 59.821712] Trying to unregister non-registered hwtime source [ 62.884604] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.886149] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [Eÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 69000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.643] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.644] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.688] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.717] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.733] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.742] calling apps_init() [0003.743] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000776] Console: colour dummy device 80x25 [ 0.002360] printk: console [tty0] enabled [ 0.002427] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002465] pid_max: default: 32768 minimum: 301 [ 0.002724] LSM: Security Framework initializing [ 0.002855] Yama: becoming mindful. [ 0.002898] SELinux: Initializing. [ 0.003047] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003096] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006125] rcu: Hierarchical SRCU implementation. [ 0.006430] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007339] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007396] DTB Build time: Aug 10 2022 20:31:49 [ 0.010797] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011038] Remapping and enabling EFI services. [ 0.013243] smp: Bringing up secondary CPUs ... [ 0.042552] Detected PIPT I-cache on CPU1 [ 0.042651] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072064] Detected PIPT I-cache on CPU2 [ 0.072141] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101710] Detected PIPT I-cache on CPU3 [ 0.101887] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131547] Detected PIPT I-cache on CPU4 [ 0.131647] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161217] Detected PIPT I-cache on CPU5 [ 0.161288] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161618] smp: Brought up 1 node, 6 CPUs [ 0.161867] SMP: Total of 6 processors activated. [ 0.161916] CPU features: detected: Privileged Access Never [ 0.161957] CPU features: detected: LSE atomic instructions [ 0.161972] CPU features: detected: User Access Override [ 0.161986] CPU features: detected: 32-bit EL0 Support [ 0.161999] CPU features: detected: RAS Extension Support [ 0.162012] CPU features: detected: CRC32 instructions [ 0.162024] CPU features: detected: 32-bit EL1 Support [ 0.228708] CPU: All CPU(s) started at EL2 [ 0.235070] devtmpfs: initialized [ 0.287349] Registered cp15_barrier emulation handler [ 0.287464] Registered setend emulation handler [ 0.287488] KASLR enabled [ 0.287806] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287832] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289429] pinctrl core: initialized pinctrl subsystem [ 0.290421] SMBIOS 3.0.0 present. [ 0.290452] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291188] NET: Registered protocol family 16 [ 0.293166] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293680] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294405] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294473] audit: initializing netlink subsys (disabled) [ 0.294760] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.295203] thermal_sys: Registered thermal governor 'step_wise' [ 0.295211] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295231] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.297124] cpuidle: using governor menu [ 0.297386] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297803] ASID allocator initialised with 32768 entries [ 0.298070] Serial: AMBA PL011 UART driver [ 0.301432] Tegra reboot handler registered. [ 0.371236] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.371407] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.371604] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.371694] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.371906] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.371987] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.372114] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.372163] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372292] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372341] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.374700] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.374740] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.374776] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.374813] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.374852] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.374886] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.374931] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.374970] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375002] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375033] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.375064] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.375094] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.375125] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.375154] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.375207] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.375238] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.375286] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.375406] mc-err: mcerr ops are set to t19x [ 0.387230] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.387257] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.387271] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.387284] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.394690] ACPI: Interpreter disabled. [ 0.395850] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.398903] iommu: Default domain type: Translated [ 0.399005] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.399564] SCSI subsystem initialized [ 0.399758] usbcore: registered new interface driver usbfs [ 0.399821] usbcore: registered new interface driver hub [ 0.399881] usbcore: registered new device driver usb [ 0.400395] mc: Linux media interface: v0.10 [ 0.400445] videodev: Linux video capture interface: v2.00 [ 0.400865] pps_core: LinuxPPS API ver. 1 registered [ 0.400888] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.400926] PTP clock support registered [ 0.401278] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.401762] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401862] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.402647] Registered efivars operations [ 0.411035] FPGA manager framework [ 0.411174] Advanced Linux Sound Architecture Driver Initialized. [ 0.412001] Bluetooth: Core ver 2.22 [ 0.412057] NET: Registered protocol family 31 [ 0.412075] Bluetooth: HCI device and connection manager initialized [ 0.412120] Bluetooth: HCI socket layer initialized [ 0.412139] Bluetooth: L2CAP socket layer initialized [ 0.412171] Bluetooth: SCO socket layer initialized [ 0.414174] camchar: rtcpu character device driver loaded [ 0.415086] clocksource: Switched to clocksource arch_sys_counter [ 0.827682] VFS: Disk quotas dquot_6.6.0 [ 0.827788] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.828206] pnp: PnP ACPI: disabled [ 0.841697] la/ptsa driver initialized. [ 0.841867] NET: Registered protocol family 2 [ 0.842115] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.850032] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.850165] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.850522] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.851199] TCP: Hash tables configured (established 65536 bind 65536) [ 0.851363] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.851505] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.851803] NET: Registered protocol family 1 [ 0.852559] RPC: Registered named UNIX socket transport module. [ 0.852582] RPC: Registered udp transport module. [ 0.852597] RPC: Registered tcp transport module. [ 0.852611] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.852633] PCI: CLS 0 bytes, default 64 [ 0.852929] Trying to unpack rootfs image as initramfs... [ 1.112499] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.115533] Freeing initrd memory: 8196K [ 1.119742] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.119775] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.119814] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.120126] kvm [1]: IPA Size Limit: 40 bits [ 1.120556] kvm [1]: vgic interrupt IRQ9 [ 1.120992] kvm [1]: VHE mode initialized successfully [ 1.122273] Initialise system trusted keyrings [ 1.122559] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.128092] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.128923] NFS: Registering the id_resolver key type [ 1.128967] Key type id_resolver registered [ 1.128985] Key type id_legacy registered [ 1.129072] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.129097] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.129135] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.138970] NET: Registered protocol family 38 [ 1.138995] Key type asymmetric registered [ 1.139011] Asymmetric key parser 'x509' registered [ 1.139136] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.139405] io scheduler mq-deadline registered [ 1.139426] io scheduler kyber registered [ 1.145352] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.148567] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.148688] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.148769] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.148870] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.148946] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.154531] scrncapt: init (heads:4 wins:6 planes:4) [ 1.154901] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.155956] EINJ: ACPI disabled. [ 1.159301] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.159329] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.159344] tegra-pmc: ### PMC reset level: L1 [ 1.159359] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.159409] tegra-pmc: PMC Prod config success [ 1.164472] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.169968] random: fast init done [ 1.170252] printk: console [ttyTCU0] enabled [ 2.722176] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.726399] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.730972] arm-smmu 10000000.iommu: stage 1 translation [ 2.736774] arm-smmu 10000000.iommu: stage 2 translation [ 2.742252] arm-smmu 10000000.iommu: nested translation [ 2.747565] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.754728] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.764634] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.767588] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.774152] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.782030] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.787443] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.792193] arm-smmu 12000000.iommu: stage 1 translation [ 2.797456] arm-smmu 12000000.iommu: stage 2 translation [ 2.802844] arm-smmu 12000000.iommu: nested translation [ 2.808534] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.815709] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.825809] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.828585] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.835397] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.842869] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.852436] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.855804] tegra_profiler: auth: init [ 2.859797] THERMAL EST: found 3 subdevs [ 2.863487] THERMAL EST num_resources: 0 [ 2.867328] [THERMAL EST subdev 0] [ 2.870375] [THERMAL EST subdev 1] [ 2.873809] [THERMAL EST subdev 2] [ 2.877318] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.883509] THERMAL EST: thz register success. [ 2.887752] THERMAL EST: end of probe, return err: 0 [ 2.893306] nvsciipc: loaded module [ 2.900575] tun: Universal TUN/TAP device driver, 1.6 [ 2.902996] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.908820] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.914371] e1000e: Intel(R) PRO/1000 Network Driver [ 2.919356] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.925415] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.930967] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.937188] PPP generic driver version 2.4.2 [ 2.941381] PPP BSD Compression module registered [ 2.945918] PPP Deflate Compression module registered [ 2.950908] PPP MPPE Compression module registered [ 2.956203] usbcore: registered new interface driver r8152 [ 2.961455] usbcore: registered new interface driver asix [ 2.967067] usbcore: registered new interface driver ax88179_178a [ 2.972886] usbcore: registered new interface driver cdc_ether [ 2.979127] usbcore: registered new interface driver net1080 [ 2.984438] usbcore: registered new interface driver cdc_subset [ 2.990730] usbcore: registered new interface driver zaurus [ 2.996438] usbcore: registered new interface driver cdc_ncm [ 3.001848] usbcore: registered new interface driver aqc111 [ 3.007489] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.013821] ohci-pci: OHCI PCI platform driver [ 3.018133] ohci-platform: OHCI generic platform driver [ 3.024066] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.030296] usbcore: registered new interface driver uas [ 3.034426] usbcore: registered new interface driver usb-storage [ 3.040320] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.046574] mousedev: PS/2 mouse device common for all mice [ 3.051315] usbcore: registered new interface driver xpad [ 3.059751] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.062033] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.070101] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.076616] i2c /dev entries driver [ 3.080021] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.085563] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.091369] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.096557] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.101813] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.107337] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.112767] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.125866] device-mapper: uevent: version 1.0.3 [ 3.126331] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.133286] cpuidle: Initializing cpuidle driver [ 3.137030] sdhci: Secure Digital Host Controller Interface driver [ 3.141912] sdhci: Copyright(c) Pierre Ossman [ 3.145753] Synopsys Designware Multimedia Card Interface Driver [ 3.152213] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.158130] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.158824] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.171400] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.189658] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.198740] vdd-1v0: supplied by regulator-dummy [ 3.204120] vdd-1v8-hs: supplied by regulator-dummy [ 3.208750] vdd-1v8-ls: supplied by regulator-dummy [ 3.213413] vdd-1v8-ao: supplied by regulator-dummy [ 3.217185] vddio-ddr-1v1: supplied by regulator-dummy [ 3.221469] vdd-rtc: supplied by regulator-dummy [ 3.222985] spmic-ldo1: supplied by regulator-dummy [ 3.224175] vdd-ao-3v3: supplied by regulator-dummy [ 3.230267] vddio-emmc-3v3: supplied by regulator-dummy [ 3.236433] spmic-ldo4: supplied by regulator-dummy [ 3.237614] vdd-usb-3v3: supplied by regulator-dummy [ 3.243696] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.249736] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.255101] spmic-ldo8: supplied by vdd-1v8-ls [ 3.256443] gpio-510 (gpio_default): hogged as output/high [ 3.258183] gpio-511 (gpio_default): hogged as output/high [ 3.264996] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.403816] max77686-rtc max77620-rtc: registered as rtc0 [ 3.405069] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.405403] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.131995] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.133263] hid: raw HID events driver (C) Jiri Kosina [ 4.134139] usbcore: registered new interface driver usbhid [ 4.134302] usbhid: USB HID core driver [ 4.136504] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.138073] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.241320] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.315128] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.776 ms, total boot 74.613 ms) ÿá[ 4.222196] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.222873] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.223901] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.224740] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.226319] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.226976] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.227636] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.228984] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.229210] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.231842] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.238522] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.244895] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.249546] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.255933] denver_knobs_init:MTS_VERSION:55637613 [ 4.267617] t19x_cache tegra-cache: probed [ 4.270642] optee: probing for conduit method. [ 4.271547] optee: revision 3.16 (65cc2218) [ 4.272539] optee: dynamic shared memory is enabled [ 4.276817] optee: initialized driver [ 4.284504] nvpmodel: initialized successfully [ 4.285094] tegra_hv: get_hvd: not initialized yet [ 4.289348] user_ivc_mempool: hypervisor not present [ 4.294993] usbcore: registered new interface driver snd-usb-audio [ 4.301559] u32 classifier [ 4.302795] input device check on [ 4.306589] Actions configured [ 4.310524] Initializing XFRM netlink socket [ 4.315463] NET: Registered protocol family 10 [ 4.321811] Segment Routing with IPv6 [ 4.322448] NET: Registered protocol family 17 [ 4.327012] NET: Registered protocol family 15 [ 4.331204] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.344646] Bluetooth: RFCOMM socket layer initialized [ 4.349392] Bluetooth: RFCOMM ver 1.11 [ 4.353286] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.359378] Bluetooth: HIDP socket layer initialized [ 4.364889] 9pnet: Installing 9P2000 support [ 4.368647] Key type dns_resolver registered [ 4.374143] registered taskstats version 1 [ 4.377386] Loading compiled-in X.509 certificates [ 4.389618] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.393158] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.402995] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.405355] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.413483] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.422130] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.539217] tegra194-pcie 14160000.pcie: Link up [ 4.542245] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.542480] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.542632] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.542868] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.543139] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.543522] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.543949] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.557812] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.558288] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.558724] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.560262] pci 0004:01:00.0: supports D1 D2 [ 4.560434] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.570085] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.570490] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.570747] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.571329] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.571622] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.571813] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.573745] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.581163] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.589679] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.599749] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.604704] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.610316] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.617368] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.625786] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.627677] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.636370] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.644817] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.759850] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.760494] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.760708] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.760897] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.761181] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.761381] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.761765] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.762170] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.778964] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.779567] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.781300] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.782596] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.784077] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.785453] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.786361] pci 0005:00:00.0: Removing from iommu group 7 [ 5.786622] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.817746] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.837937] host1x 13e10000.host1x: initialized [ 5.839560] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.840392] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.841537] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.842205] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.843479] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.844091] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.845030] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.845581] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.853065] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.859836] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.870056] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.876757] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.886705] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.894097] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.903807] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.910684] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.920818] falcon 15340000.vic: Adding to iommu group 17 [ 5.935017] falcon 15340000.vic: initialized [ 5.936146] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.941922] falcon 15380000.nvjpg: initialized [ 5.942533] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.954177] falcon 154c0000.nvenc: initialized [ 5.954825] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.963951] falcon 15a80000.nvenc1: initialized [ 5.964524] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.975836] nvdec 15480000.nvdec: initialized [ 5.976410] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.985085] nvdec 15140000.nvdec1: initialized [ 5.985580] tsec 15500000.tsec: Adding to iommu group 18 [ 5.992455] tsec 15500000.tsec: initialized [ 5.993000] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.001083] tsec 15100000.tsecb: initialized [ 6.004995] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.030460] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.042495] gpio-374 (wifi-enable): hogged as output/high [ 6.042842] gpio-431 (camera-control-output-low): hogged as output/low [ 6.043188] gpio-432 (camera-control-output-low): hogged as output/low [ 6.044919] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.046408] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.046943] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.052062] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.057605] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.063323] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.068513] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.076823] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.084308] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.095587] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.101138] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.107138] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.115729] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.125164] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.132553] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.140098] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.146411] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.155711] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.161998] pva 16000000.pva0: Adding to iommu group 22 [ 6.187978] pva 16000000.pva0: initialized [ 6.193311] pva 16800000.pva1: Adding to iommu group 23 [ 6.204319] pva 16800000.pva1: initialized [ 6.208823] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.220998] nvdla 15880000.nvdla0: initialized [ 6.222417] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.238918] nvdla 158c0000.nvdla1: initialized [ 6.241248] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.241558] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.241898] tegradccommon 15200000.display-hub: dma mapping done [ 6.244024] tegradc 15200000.display: Adding to iommu group 26 [ 6.251986] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.252384] generic_infoframe_type: 0x87 [ 6.252621] tegradc 15200000.display: DT parsed successfully [ 6.252893] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.254999] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.257643] tegradc 15210000.display: Adding to iommu group 26 [ 6.258499] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.270866] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.275472] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.275488] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.285093] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.292127] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.306267] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.306286] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.311855] tegra_cec 3960000.tegra_cec: probed [ 6.317450] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.328795] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.329300] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.346930] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.347562] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.359338] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.359574] kfuse 3830000.kfuse: initialized [ 6.368362] tegradc 15210000.display: disp0 connected to head1->sor [ 6.370936] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.376870] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.383287] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.383956] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.390724] tegradc 15210000.display: DT parsed successfully [ 6.397466] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.402865] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.426916] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.431933] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.441260] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.446690] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.466090] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.466448] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.469642] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.477915] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.486765] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.493302] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.501067] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.507939] usb usb1: Product: xHCI Host Controller [ 6.513164] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.519398] usb usb1: SerialNumber: 3610000.xhci [ 6.525278] hub 1-0:1.0: USB hub found [ 6.527775] hub 1-0:1.0: 4 ports detected [ 6.532447] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.537132] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.544975] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.552653] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.560599] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.567893] usb usb2: Product: xHCI Host Controller [ 6.572518] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.578728] usb usb2: SerialNumber: 3610000.xhci [ 6.584371] hub 2-0:1.0: USB hub found [ 6.587548] hub 2-0:1.0: 4 ports detected [ 6.627233] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.633229] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.634714] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.634916] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.649030] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.650051] tegra194-cpufreq ccplex: probed with BWMGR [ 6.651433] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.652184] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.652654] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.653982] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.663067] mmc0: CQHCI version 5.10 [ 6.664944] tegra194-vi5 15c10000.vi: initialized [ 6.666459] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.667900] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.671085] generic_infoframe_type: 0x87 [ 6.677810] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.681236] tegradc 15200000.display: DT parsed successfully [ 6.689341] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.692776] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.695167] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.701413] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.701420] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.701429] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.710148] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.723100] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.724182] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.730624] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.737221] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.745254] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.751983] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.761286] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.766748] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.767015] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.782915] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.791117] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.795491] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.801764] nvethernet 2490000.ethernet: Macsec not supported [ 6.814700] tegradc 15200000.display: probed [ 6.845156] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.853974] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.858375] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.859955] mmc0: Command Queue Engine enabled [ 6.865523] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.869648] mmc0: periodic cache flush enabled [ 6.869669] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.878201] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.881576] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.888900] tegra-se-nvhost 15810000.se: initialized [ 6.893872] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.903657] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.917127] Console: switching to colour frame buffer device 240x67 [ 6.917314] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.922665] tegradc 15200000.display: fb registered [ 6.933897] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.941022] tegra-se-nvhost 15820000.se: initialized [ 6.941063] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.944137] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.946957] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.950734] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.958947] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.970703] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.970708] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.970713] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.970717] usb 1-2: Manufacturer: Generic [ 6.972691] hub 1-2:1.0: USB hub found [ 6.977745] tegra-se-nvhost 15830000.se: initialized [ 6.986578] hub 1-2:1.0: 4 ports detected [ 6.996222] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.021327] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.026966] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.028095] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.036492] tegra-se-nvhost 15840000.se: initialized [ 7.043429] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.056516] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.058150] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.063073] Extcon AUX1(HDMI) enable [ 7.070644] tegra_actmon d230000.actmon: in actmon_register()... [ 7.073039] tegradc 15210000.display: disp1 connected to head1->sor [ 7.079152] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.085193] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.090606] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.097421] tegradc 15210000.display: DT parsed successfully [ 7.105445] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.107890] hvc_sysfs: hypervisor is not present [ 7.111116] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.145932] ALSA device list: [ 7.146053] No soundcards found. [ 7.146254] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.146441] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.152417] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.158693] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.166034] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.171117] usb 2-3: Manufacturer: Generic [ 7.176821] tegradc 15210000.display: probed [ 7.179561] tegradc 15210000.display: fb registered [ 7.187654] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.191729] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.193626] Freeing unused kernel memory: 3968K [ 7.199361] hub 2-3:1.0: USB hub found [ 7.207998] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.213419] hub 2-3:1.0: 4 ports detected [ 7.215189] Run /init as init process [ 7.220827] tegradc 15210000.display: blank - powerdown [ 7.225988] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.225993] Extcon DP: HPD disabled [ 7.225996] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.226008] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.226018] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.257566] tegradc 15200000.display: blank - powerdown [ 7.271095] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.277740] random: crng init done [ 7.284312] Root device found: mmcblk0p1 [ 7.286271] Found dev node: /dev/mmcblk0p1 [ 7.294102] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.294107] Extcon AUX1(HDMI) disable [ 7.317507] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.318378] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.321502] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.325628] Rootfs mounted over mmcblk0p1 [ 7.330744] tegradc 15200000.display: unblank [ 7.331089] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.331094] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.332040] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.332239] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.338339] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.340341] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.344954] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.344958] Extcon AUX1(HDMI) enable [ 7.357111] tegradc 15200000.display: sync windows ret = 247 [ 7.374895] Switching from initrd to actual rootfs [ 7.395695] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.400039] Extcon HDMI: HPD enabled [ 7.403712] tegradc 15200000.display: hdmi: plugged [ 7.428483] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.430008] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.431477] usb 1-3: Product: Bluetooth Radio [ 7.432819] usb 1-3: Manufacturer: Realtek [ 7.434174] usb 1-3: SerialNumber: 00e04c000001 [ 7.545795] systemd[1]: System time before build time, advancing clock. [ 7.616922] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.621947] systemd[1]: Detected architecture arm64. [ 7.663205] systemd[1]: Set hostname to . [ 7.831763] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.190292] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.193282] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.201068] systemd[1]: Created slice system-modprobe.slice. [ 8.208749] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.215987] systemd[1]: Created slice User and Session Slice. [ 8.221283] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.225539] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.228901] systemd[1]: Reached target User and Group Name Lookups. [ 8.232107] systemd[1]: Reached target Slices. [ 8.235161] systemd[1]: Reached target Swap. [ 8.239345] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.243095] systemd[1]: Listening on Syslog Socket. [ 8.246679] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.250112] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.254391] systemd[1]: Listening on Journal Audit Socket. [ 8.258112] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.261946] systemd[1]: Listening on Journal Socket. [ 8.267286] systemd[1]: Listening on udev Control Socket. [ 8.270748] systemd[1]: Listening on udev Kernel Socket. [ 8.281055] systemd[1]: Mounting Huge Pages File System... [ 8.290089] systemd[1]: Mounting POSIX Message Queue File System... [ 8.298749] systemd[1]: Mounting RPC Pipe File System... [ 8.307677] systemd[1]: Mounting Kernel Debug File System... [ 8.316430] systemd[1]: Mounting Kernel Trace File System... [ 8.326403] systemd[1]: Starting Journal Service... [ 8.335381] systemd[1]: Starting Set the console keyboard layout... [ 8.343694] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.347245] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.353755] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.362007] systemd[1]: Started Nameserver information manager. [ 8.367324] systemd[1]: Reached target Network (Pre). [ 8.375500] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.377264] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.384666] systemd[1]: Starting Load Kernel Modules... [ 8.393694] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.401954] systemd[1]: Starting udev Coldplug all Devices... [ 8.414935] systemd[1]: Mounted Huge Pages File System. [ 8.420597] systemd[1]: Mounted POSIX Message Queue File System. [ 8.422176] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.425712] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.428057] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.429614] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.431479] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.431608] systemd[1]: Mounted RPC Pipe File System. [ 8.432890] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.435981] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.436256] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.436430] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.436440] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.443848] systemd[1]: Mounted Kernel Debug File System. [ 8.447583] systemd[1]: Mounted Kernel Trace File System. [ 8.455500] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.460403] systemd[1]: nvfb-udev.service: Succeeded. [ 8.464415] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.474590] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.487586] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.489359] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.496827] systemd[1]: Starting Load/Save Random Seed... [ 8.506435] systemd[1]: Starting Create System Users... [ 8.527718] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.527718] [ 8.558222] systemd[1]: Finished Load/Save Random Seed. [ 8.567799] systemd[1]: Finished Load Kernel Modules. [ 8.572217] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.580349] systemd[1]: Mounting Kernel Configuration File System... [ 8.588845] systemd[1]: Started OP-TEE Client Supplicant. [ 8.597900] systemd[1]: Starting Apply Kernel Variables... [ 8.608803] systemd[1]: Finished Set the console keyboard layout. [ 8.613064] systemd[1]: Mounted Kernel Configuration File System. [ 8.625422] systemd[1]: Finished Create System Users. [ 10.227274] hot-surface-alert cooling state: 0 -> 1 [ 10.231483] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.240590] imx219 9-0010: board setup failed [ 10.242087] imx219: probe of 9-0010 failed with error -121 [ 10.255894] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.261084] imx219 10-0010: board setup failed [ 10.262386] imx219: probe of 10-0010 failed with error -121 [ 10.608794] using random self ethernet address [ 10.610036] using random host ethernet address [ 11.845375] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.846659] Creating 1 MTD partitions on "spi6.0": [ 11.847892] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.323970] using random self ethernet address [ 12.323976] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.835595] nvidia: loading out-of-tree module taints kernel. [ 58.220968] watchdog: watchdog0: watchdog did not stop! [ 58.700739] Trying to unregister non-registered hwtime source [ 61.757353] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.758904] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR]ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized noc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 202ÿâavfs_clk_platform_post initialized ÿä2 aÿâcvc_late initialized regulator_post initialized ÿäarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.486] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.619] E> invalid display type [0003.620] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.649] I> edid read success [0003.649] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.650] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 4096, height = 2160, frequency = 296703296 [0003.723] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.734] I> hdmi_enable, starting HDMI initialisation [0003.739] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.749] calling apps_init() [0003.750] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000765] Console: colour dummy device 80x25 [ 0.002314] printk: console [tty0] enabled [ 0.002377] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002437] pid_max: default: 32768 minimum: 301 [ 0.002612] LSM: Security Framework initializing [ 0.002686] Yama: becoming mindful. [ 0.002750] SELinux: Initializing. [ 0.002918] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002959] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005947] rcu: Hierarchical SRCU implementation. [ 0.006239] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007187] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007222] DTB Build time: Aug 10 2022 20:31:49 [ 0.011674] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.012011] Remapping and enabling EFI services. [ 0.014047] smp: Bringing up secondary CPUs ... [ 0.043126] Detected PIPT I-cache on CPU1 [ 0.043254] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074004] Detected PIPT I-cache on CPU2 [ 0.074169] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103817] Detected PIPT I-cache on CPU3 [ 0.103959] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133720] Detected PIPT I-cache on CPU4 [ 0.133816] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163600] Detected PIPT I-cache on CPU5 [ 0.163781] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164142] smp: Brought up 1 node, 6 CPUs [ 0.164420] SMP: Total of 6 processors activated. [ 0.164468] CPU features: detected: Privileged Access Never [ 0.164491] CPU features: detected: LSE atomic instructions [ 0.164522] CPU features: detected: User Access Override [ 0.164536] CPU features: detected: 32-bit EL0 Support [ 0.164548] CPU features: detected: RAS Extension Support [ 0.164560] CPU features: detected: CRC32 instructions [ 0.164573] CPU features: detected: 32-bit EL1 Support [ 0.233770] CPU: All CPU(s) started at EL2 [ 0.240105] devtmpfs: initialized [ 0.290436] Registered cp15_barrier emulation handler [ 0.290581] Registered setend emulation handler [ 0.290602] KASLR enabled [ 0.290955] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.290980] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292427] pinctrl core: initialized pinctrl subsystem [ 0.293521] SMBIOS 3.0.0 present. [ 0.293550] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294252] NET: Registered protocol family 16 [ 0.296281] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296785] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297504] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297560] audit: initializing netlink subsys (disabled) [ 0.297800] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.298287] thermal_sys: Registered thermal governor 'step_wise' [ 0.298294] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298309] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300569] cpuidle: using governor menu [ 0.300946] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.301316] ASID allocator initialised with 32768 entries [ 0.301553] Serial: AMBA PL011 UART driver [ 0.305486] Tegra reboot handler registered. [ 0.380893] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.381032] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.381239] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.381301] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.381434] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.381476] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.381592] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.381633] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.381776] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.381819] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.384470] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.384509] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.384539] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.384587] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.384622] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.384669] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.384711] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.384759] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.384786] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.384812] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.384837] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.384862] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.384887] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.384912] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.384937] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.384962] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.384987] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.385082] mc-err: mcerr ops are set to t19x [ 0.396902] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.396926] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.396938] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.396950] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.403968] ACPI: Interpreter disabled. [ 0.405086] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.406394] iommu: Default domain type: Translated [ 0.406468] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.406825] SCSI subsystem initialized [ 0.407020] usbcore: registered new interface driver usbfs [ 0.407061] usbcore: registered new interface driver hub [ 0.407093] usbcore: registered new device driver usb [ 0.407579] mc: Linux media interface: v0.10 [ 0.407608] videodev: Linux video capture interface: v2.00 [ 0.408048] pps_core: LinuxPPS API ver. 1 registered [ 0.408060] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.408084] PTP clock support registered [ 0.408331] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.408650] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.408757] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.409453] Registered efivars operations [ 0.414545] FPGA manager framework [ 0.414669] Advanced Linux Sound Architecture Driver Initialized. [ 0.415264] Bluetooth: Core ver 2.22 [ 0.415303] NET: Registered protocol family 31 [ 0.415315] Bluetooth: HCI device and connection manager initialized [ 0.415330] Bluetooth: HCI socket layer initialized [ 0.415345] Bluetooth: L2CAP socket layer initialized [ 0.415366] Bluetooth: SCO socket layer initialized [ 0.417452] camchar: rtcpu character device driver loaded [ 0.418174] clocksource: Switched to clocksource arch_sys_counter [ 0.706745] VFS: Disk quotas dquot_6.6.0 [ 0.706816] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.707152] pnp: PnP ACPI: disabled [ 0.719634] la/ptsa driver initialized. [ 0.719763] NET: Registered protocol family 2 [ 0.719938] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.724479] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.724613] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.724862] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.725297] TCP: Hash tables configured (established 65536 bind 65536) [ 0.725419] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.725508] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.725719] NET: Registered protocol family 1 [ 0.726386] RPC: Registered named UNIX socket transport module. [ 0.726401] RPC: Registered udp transport module. [ 0.726410] RPC: Registered tcp transport module. [ 0.726419] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.726456] PCI: CLS 0 bytes, default 64 [ 0.726714] Trying to unpack rootfs image as initramfs... [ 0.913734] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.915901] Freeing initrd memory: 8196K [ 0.920649] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.920714] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.920751] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.921319] kvm [1]: IPA Size Limit: 40 bits [ 0.921824] kvm [1]: vgic interrupt IRQ9 [ 0.922441] kvm [1]: VHE mode initialized successfully [ 0.924042] Initialise system trusted keyrings [ 0.924411] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.930494] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.931289] NFS: Registering the id_resolver key type [ 0.931321] Key type id_resolver registered [ 0.931335] Key type id_legacy registered [ 0.931442] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.931489] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.931527] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.942485] NET: Registered protocol family 38 [ 0.942508] Key type asymmetric registered [ 0.942522] Asymmetric key parser 'x509' registered [ 0.942565] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.942769] io scheduler mq-deadline registered [ 0.942787] io scheduler kyber registered [ 0.949168] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.952406] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.952525] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.952624] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.952696] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.952766] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.959863] scrncapt: init (heads:4 wins:6 planes:4) [ 0.960003] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.961188] EINJ: ACPI disabled. [ 0.965865] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.965894] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.965908] tegra-pmc: ### PMC reset level: L1 [ 0.965921] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.965969] tegra-pmc: PMC Prod config success [ 0.971713] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.994001] random: fast init done [ 1.000309] printk: console [ttyTCU0] enabled [ 2.529984] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.534119] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.538584] arm-smmu 10000000.iommu: stage 1 translation [ 2.544085] arm-smmu 10000000.iommu: stage 2 translation [ 2.549849] arm-smmu 10000000.iommu: nested translation [ 2.555204] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.562109] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.572622] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.575517] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.581817] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.589358] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.595130] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.599824] arm-smmu 12000000.iommu: stage 1 translation [ 2.605351] arm-smmu 12000000.iommu: stage 2 translation [ 2.610500] arm-smmu 12000000.iommu: nested translation [ 2.615929] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.623373] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.633553] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.636258] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.643058] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.650258] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.660062] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.663306] tegra_profiler: auth: init [ 2.667436] THERMAL EST: found 3 subdevs [ 2.671140] THERMAL EST num_resources: 0 [ 2.674743] [THERMAL EST subdev 0] [ 2.678030] [THERMAL EST subdev 1] [ 2.681715] [THERMAL EST subdev 2] [ 2.684972] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.691156] THERMAL EST: thz register success. [ 2.695679] THERMAL EST: end of probe, return err: 0 [ 2.700737] nvsciipc: loaded module [ 2.707762] tun: Universal TUN/TAP device driver, 1.6 [ 2.710538] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.716481] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.722288] e1000e: Intel(R) PRO/1000 Network Driver [ 2.727231] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.733077] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.738364] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.744570] PPP generic driver version 2.4.2 [ 2.748858] PPP BSD Compression module registered [ 2.753592] PPP Deflate Compression module registered [ 2.758827] PPP MPPE Compression module registered [ 2.763580] usbcore: registered new interface driver r8152 [ 2.769359] usbcore: registered new interface driver asix [ 2.774439] usbcore: registered new interface driver ax88179_178a [ 2.780803] usbcore: registered new interface driver cdc_ether [ 2.786762] usbcore: registered new interface driver net1080 [ 2.792092] usbcore: registered new interface driver cdc_subset [ 2.798390] usbcore: registered new interface driver zaurus [ 2.804093] usbcore: registered new interface driver cdc_ncm [ 2.809761] usbcore: registered new interface driver aqc111 [ 2.815465] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.821261] ohci-pci: OHCI PCI platform driver [ 2.825530] ohci-platform: OHCI generic platform driver [ 2.831552] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.838015] usbcore: registered new interface driver uas [ 2.841847] usbcore: registered new interface driver usb-storage [ 2.847947] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.853965] mousedev: PS/2 mouse device common for all mice [ 2.858968] usbcore: registered new interface driver xpad [ 2.867308] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.869946] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.877540] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.884038] i2c /dev entries driver [ 2.887672] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.893449] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.898503] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.903907] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.909288] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.915049] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.920225] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.934356] device-mapper: uevent: version 1.0.3 [ 2.934857] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.940689] cpuidle: Initializing cpuidle driver [ 2.944820] sdhci: Secure Digital Host Controller Interface driver [ 2.949333] sdhci: Copyright(c) Pierre Ossman [ 2.953707] Synopsys Designware Multimedia Card Interface Driver [ 2.959897] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.965969] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.966868] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.979117] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.997811] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.006972] vdd-1v0: supplied by regulator-dummy [ 3.012389] vdd-1v8-hs: supplied by regulator-dummy [ 3.017225] vdd-1v8-ls: supplied by regulator-dummy [ 3.021949] vdd-1v8-ao: supplied by regulator-dummy [ 3.025790] vddio-ddr-1v1: supplied by regulator-dummy [ 3.030201] vdd-rtc: supplied by regulator-dummy [ 3.031909] spmic-ldo1: supplied by regulator-dummy [ 3.033160] vdd-ao-3v3: supplied by regulator-dummy [ 3.039286] vddio-emmc-3v3: supplied by regulator-dummy [ 3.045591] spmic-ldo4: supplied by regulator-dummy [ 3.046860] vdd-usb-3v3: supplied by regulator-dummy [ 3.053010] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.059151] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.064711] spmic-ldo8: supplied by vdd-1v8-ls [ 3.066116] gpio-510 (gpio_default): hogged as output/high [ 3.067475] gpio-511 (gpio_default): hogged as output/high [ 3.072851] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.211259] max77686-rtc max77620-rtc: registered as rtc0 [ 3.212353] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.212668] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.940794] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.942129] hid: raw HID events driver (C) Jiri Kosina [ 3.942936] usbcore: registered new interface driver usbhid [ 3.943080] usbhid: USB HID core driver [ 3.945110] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.946244] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.022586] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.097311] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.535 ms) ÿá[ 4.031148] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.031961] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.033249] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.033936] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.036048] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.036814] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.037493] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.039222] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.039559] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.041456] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.047198] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.053512] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.059156] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.065097] denver_knobs_init:MTS_VERSION:55637613 [ 4.077543] t19x_cache tegra-cache: probed [ 4.080247] optee: probing for conduit method. [ 4.081166] optee: revision 3.16 (65cc2218) [ 4.082699] optee: dynamic shared memory is enabled [ 4.085864] optee: initialized driver [ 4.092131] nvpmodel: initialized successfully [ 4.093230] tegra_hv: get_hvd: not initialized yet [ 4.097957] user_ivc_mempool: hypervisor not present [ 4.104259] usbcore: registered new interface driver snd-usb-audio [ 4.110360] u32 classifier [ 4.111635] input device check on [ 4.115455] Actions configured [ 4.119217] Initializing XFRM netlink socket [ 4.124214] NET: Registered protocol family 10 [ 4.130533] Segment Routing with IPv6 [ 4.131252] NET: Registered protocol family 17 [ 4.135799] NET: Registered protocol family 15 [ 4.140042] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.153853] Bluetooth: RFCOMM socket layer initialized [ 4.158272] Bluetooth: RFCOMM ver 1.11 [ 4.162385] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.167925] Bluetooth: HIDP socket layer initialized [ 4.174064] 9pnet: Installing 9P2000 support [ 4.177624] Key type dns_resolver registered [ 4.182870] registered taskstats version 1 [ 4.186029] Loading compiled-in X.509 certificates [ 4.199061] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.201994] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.212205] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.214019] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.222597] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.231116] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.346303] tegra194-pcie 14160000.pcie: Link up [ 4.349276] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.349515] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.349715] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.349961] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.350340] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.350720] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.351184] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.361381] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.361950] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.362641] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.364229] pci 0004:01:00.0: supports D1 D2 [ 4.364419] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.375459] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.375992] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.376285] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.376734] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.377031] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.377230] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.381068] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.388529] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.397103] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.407293] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.411895] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.417479] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.424354] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.433783] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.435102] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.443790] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.452057] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.554413] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.555074] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.555339] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.555504] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.555789] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.555992] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.556378] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.556821] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.573676] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.574057] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.576536] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.577981] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.580522] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.582600] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.583613] pci 0005:00:00.0: Removing from iommu group 7 [ 5.583942] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.615756] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.637270] host1x 13e10000.host1x: initialized [ 5.639252] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.640251] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.641257] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.642048] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.643253] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.644153] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.645015] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.645744] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.647490] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.654655] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.664670] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.671539] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.681736] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.688575] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.698719] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.705569] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.715453] falcon 15340000.vic: Adding to iommu group 17 [ 5.730701] falcon 15340000.vic: initialized [ 5.731792] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.737348] falcon 15380000.nvjpg: initialized [ 5.737978] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.748103] falcon 154c0000.nvenc: initialized [ 5.748829] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.757822] falcon 15a80000.nvenc1: initialized [ 5.758666] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.771584] nvdec 15480000.nvdec: initialized [ 5.772354] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.782087] nvdec 15140000.nvdec1: initialized [ 5.782880] tsec 15500000.tsec: Adding to iommu group 18 [ 5.788340] tsec 15500000.tsec: initialized [ 5.789005] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.795416] tsec 15100000.tsecb: initialized [ 5.799843] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.823076] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.835681] gpio-374 (wifi-enable): hogged as output/high [ 5.836032] gpio-431 (camera-control-output-low): hogged as output/low [ 5.836377] gpio-432 (camera-control-output-low): hogged as output/low [ 5.838081] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.840187] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.840874] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.847019] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.852117] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.857724] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.863577] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.872640] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.879290] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.890046] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.895904] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.901555] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.910292] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.919920] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.926940] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.934685] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.940896] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.950524] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.956959] pva 16000000.pva0: Adding to iommu group 22 [ 5.983119] pva 16000000.pva0: initialized [ 5.989002] pva 16800000.pva1: Adding to iommu group 23 [ 6.000380] pva 16800000.pva1: initialized [ 6.005204] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.017878] nvdla 15880000.nvdla0: initialized [ 6.019435] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.028183] nvdla 158c0000.nvdla1: initialized [ 6.033089] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.033424] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.033654] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.033927] tegradccommon 15200000.display-hub: dma mapping done [ 6.034090] tegradc 15200000.display: Adding to iommu group 26 [ 6.034358] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.036750] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.040899] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.043077] tegradc 15210000.display: Adding to iommu group 26 [ 6.043859] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.044028] generic_infoframe_type: 0x87 [ 6.044142] tegradc 15200000.display: DT parsed successfully [ 6.044276] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.046587] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.076053] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.081699] tegra_cec 3960000.tegra_cec: probed [ 6.082798] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.090281] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.090367] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.101038] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.111193] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.117102] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.135897] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.136452] kfuse 3830000.kfuse: initialized [ 6.151676] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.157947] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.158596] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.164529] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.177541] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.178422] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.187500] tegradc 15210000.display: disp0 connected to head1->sor [ 6.195117] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.199336] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.205772] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.212657] tegradc 15210000.display: DT parsed successfully [ 6.222009] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.226513] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.233459] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.261015] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.261424] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.264389] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.272402] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.281403] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.287978] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.295263] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.302565] usb usb1: Product: xHCI Host Controller [ 6.307688] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.313737] usb usb1: SerialNumber: 3610000.xhci [ 6.319265] hub 1-0:1.0: USB hub found [ 6.322706] hub 1-0:1.0: 4 ports detected [ 6.327247] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.332084] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.339396] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.347274] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.355177] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.362415] usb usb2: Product: xHCI Host Controller [ 6.367108] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.373576] usb usb2: SerialNumber: 3610000.xhci [ 6.378843] hub 2-0:1.0: USB hub found [ 6.381795] hub 2-0:1.0: 4 ports detected [ 6.425676] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.431740] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.432848] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.433089] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.446246] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1903000 KHz, changing to: 1907200 KHz [ 6.447266] tegra194-cpufreq ccplex: probed with BWMGR [ 6.448482] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.449129] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.449707] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.451031] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.456402] tegra194-vi5 15c10000.vi: initialized [ 6.458109] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.459567] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.460053] mmc0: CQHCI version 5.10 [ 6.462272] generic_infoframe_type: 0x87 [ 6.468696] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.472157] tegradc 15200000.display: DT parsed successfully [ 6.475760] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.475769] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.484210] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.489077] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.489712] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.496886] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.502646] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.510226] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.510844] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.518471] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.525280] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.525935] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.533517] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.539852] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.547836] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.554845] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.570265] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.575264] nvethernet 2490000.ethernet: Macsec not supported [ 6.594210] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.596346] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.636276] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.637641] tegradc 15200000.display: probed [ 6.643789] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.650368] mmc0: Command Queue Engine enabled [ 6.652644] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.656859] mmc0: periodic cache flush enabled [ 6.664416] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.668752] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.677294] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.682620] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.690125] tegra-se-nvhost 15810000.se: initialized [ 6.693288] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.702610] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.711394] Console: switching to colour frame buffer device 240x67 [ 6.711631] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.717216] tegradc 15200000.display: fb registered [ 6.728567] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.735360] tegra-se-nvhost 15820000.se: initialized [ 6.735481] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.740992] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.745371] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.751755] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.759241] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.764022] tegra-se-nvhost 15830000.se: initialized [ 6.777469] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.782950] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.789415] tegra-se-nvhost 15840000.se: initialized [ 6.794081] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.795681] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.802157] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.802203] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.809974] tegra_actmon d230000.actmon: in actmon_register()... [ 6.815817] usb 1-2: Manufacturer: Generic [ 6.820303] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.826270] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.827366] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.828505] hub 1-2:1.0: USB hub found [ 6.829571] hub 1-2:1.0: 4 ports detected [ 6.830800] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.835924] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.845228] hvc_sysfs: hypervisor is not present [ 6.853196] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.883781] ALSA device list: [ 6.887967] Extcon AUX1(HDMI) enable [ 6.888082] tegradc 15210000.display: disp1 connected to head1->sor [ 6.891118] No soundcards found. [ 6.904327] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.911087] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.911516] tegradc 15210000.display: DT parsed successfully [ 6.924859] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.932932] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.938739] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.951969] tegradc 15210000.display: probed [ 6.952318] tegradc 15210000.display: fb registered [ 6.956107] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.957585] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.962374] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.964288] Freeing unused kernel memory: 3968K [ 6.969703] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.969721] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.977055] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.999891] usb 2-3: Manufacturer: Generic [ 6.999912] tegradc 15210000.display: blank - powerdown [ 7.009160] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.010764] hub 2-3:1.0: USB hub found [ 7.014342] Run /init as init process [ 7.017298] Extcon DP: HPD disabled [ 7.017304] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.017333] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.017345] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.023048] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.051882] tegradc 15200000.display: blank - powerdown [ 7.078243] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.078249] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.093632] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.093638] Extcon AUX1(HDMI) disable [ 7.104241] Root device found: mmcblk0p1 [ 7.106226] Found dev node: /dev/mmcblk0p1 [ 7.117822] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.118706] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.129351] tegradc 15200000.display: unblank [ 7.130398] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.130596] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.136685] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.138648] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.142723] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.142728] Extcon AUX1(HDMI) enable [ 7.142795] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.142842] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.142848] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.146789] Rootfs mounted over mmcblk0p1 [ 7.155425] tegradc 15200000.display: sync windows ret = 247 [ 7.177177] Switching from initrd to actual rootfs [ 7.193998] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.201298] Extcon HDMI: HPD enabled [ 7.204973] tegradc 15200000.display: hdmi: plugged [ 7.227407] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.228840] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.230249] usb 1-3: Product: Bluetooth Radio [ 7.231536] usb 1-3: Manufacturer: Realtek [ 7.233911] usb 1-3: SerialNumber: 00e04c000001 [ 7.342298] systemd[1]: System time before build time, advancing clock. [ 7.414592] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.419440] systemd[1]: Detected architecture arm64. [ 7.464361] systemd[1]: Set hostname to . [ 7.632160] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.985096] random: systemd: uninitialized urandom read (16 bytes read) [ 7.986868] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.988450] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.994028] systemd[1]: Created slice system-modprobe.slice. [ 7.997584] random: systemd: uninitialized urandom read (16 bytes read) [ 8.000239] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.003339] random: systemd: uninitialized urandom read (16 bytes read) [ 8.005883] systemd[1]: Created slice User and Session Slice. [ 8.009305] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.013528] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.016853] systemd[1]: Reached target User and Group Name Lookups. [ 8.020014] systemd[1]: Reached target Slices. [ 8.023039] systemd[1]: Reached target Swap. [ 8.027022] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.030605] systemd[1]: Listening on Syslog Socket. [ 8.034086] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.037444] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.041644] systemd[1]: Listening on Journal Audit Socket. [ 8.045209] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.049000] systemd[1]: Listening on Journal Socket. [ 8.052682] systemd[1]: Listening on udev Control Socket. [ 8.056239] systemd[1]: Listening on udev Kernel Socket. [ 8.064529] systemd[1]: Mounting Huge Pages File System... [ 8.073160] systemd[1]: Mounting POSIX Message Queue File System... [ 8.081357] systemd[1]: Mounting RPC Pipe File System... [ 8.091452] systemd[1]: Mounting Kernel Debug File System... [ 8.101106] systemd[1]: Mounting Kernel Trace File System... [ 8.111244] systemd[1]: Starting Journal Service... [ 8.120453] systemd[1]: Starting Set the console keyboard layout... [ 8.128997] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.132631] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.139260] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.147630] systemd[1]: Started Nameserver information manager. [ 8.152117] systemd[1]: Reached target Network (Pre). [ 8.159266] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.159448] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.169340] systemd[1]: Starting Load Kernel Modules... [ 8.177178] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.186244] systemd[1]: Starting udev Coldplug all Devices... [ 8.196696] systemd[1]: Mounted Huge Pages File System. [ 8.200500] systemd[1]: Mounted POSIX Message Queue File System. [ 8.204089] systemd[1]: Mounted RPC Pipe File System. [ 8.207702] systemd[1]: Mounted Kernel Debug File System. [ 8.211467] systemd[1]: Mounted Kernel Trace File System. [ 8.212272] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.214813] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.214818] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.214828] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.214833] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.220354] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.226271] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.226592] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.230846] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.232472] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.248367] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.259219] systemd[1]: nvfb-udev.service: Succeeded. [ 8.263888] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.277591] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.290745] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.292522] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.300339] systemd[1]: Starting Load/Save Random Seed... [ 8.308020] systemd[1]: Starting Create System Users... [ 8.354661] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.354661] [ 8.361101] systemd[1]: Finished Create System Users. [ 8.370686] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.387991] systemd[1]: Finished Set the console keyboard layout. [ 8.395203] systemd[1]: Finished Load Kernel Modules. [ 8.399836] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.406145] systemd[1]: Mounting Kernel Configuration File System... [ 8.413867] systemd[1]: Started OP-TEE Client Supplicant. [ 8.422113] systemd[1]: Starting Apply Kernel Variables... [ 8.435301] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.439655] systemd[1]: Mounted Kernel Configuration File System. [ 8.443389] systemd[1]: Reached target Local File Systems (Pre). [ 8.446616] systemd[1]: Reached target Local File Systems. [ 8.449895] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 8.457424] systemd[1]: Starting Enable support for additional executable binary formats... [ 8.459072] random: crng init done [ 8.459078] random: 7 urandom warning(s) missed due to ratelimiting [ 9.863497] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.870043] imx219 9-0010: board setup failed [ 9.870151] imx219: probe of 9-0010 failed with error -121 [ 9.883670] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.888846] imx219 10-0010: board setup failed [ 9.890266] imx219: probe of 10-0010 failed with error -121 [ 10.014935] hot-surface-alert cooling state: 0 -> 1 [ 10.746003] using random self ethernet address [ 10.797791] using random host ethernet address [ 11.589297] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.589304] Creating 1 MTD partitions on "spi6.0": [ 11.589314] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.275537] using random self ethernet address [ 12.277171] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.867908] nvidia: loading out-of-tree module taints kernel. [ 59.407950] watchdog: watchdog0: watchdog did not stop! [ 59.883170] Trying to unregister non-registered hwtime source [ 62.941308] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.943343] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.486] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.686] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.747] calling apps_init() [0003.748] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000874] Console: colour dummy device 80x25 [ 0.002406] printk: console [tty0] enabled [ 0.002480] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002517] pid_max: default: 32768 minimum: 301 [ 0.002728] LSM: Security Framework initializing [ 0.002806] Yama: becoming mindful. [ 0.002853] SELinux: Initializing. [ 0.003023] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003082] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006000] rcu: Hierarchical SRCU implementation. [ 0.006258] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007272] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007315] DTB Build time: Aug 10 2022 20:31:49 [ 0.011656] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011939] Remapping and enabling EFI services. [ 0.013887] smp: Bringing up secondary CPUs ... [ 0.043151] Detected PIPT I-cache on CPU1 [ 0.043230] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073832] Detected PIPT I-cache on CPU2 [ 0.073989] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103514] Detected PIPT I-cache on CPU3 [ 0.103664] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133386] Detected PIPT I-cache on CPU4 [ 0.133483] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163203] Detected PIPT I-cache on CPU5 [ 0.163398] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163815] smp: Brought up 1 node, 6 CPUs [ 0.164037] SMP: Total of 6 processors activated. [ 0.164118] CPU features: detected: Privileged Access Never [ 0.164140] CPU features: detected: LSE atomic instructions [ 0.164172] CPU features: detected: User Access Override [ 0.164186] CPU features: detected: 32-bit EL0 Support [ 0.164201] CPU features: detected: RAS Extension Support [ 0.164215] CPU features: detected: CRC32 instructions [ 0.164229] CPU features: detected: 32-bit EL1 Support [ 0.239500] CPU: All CPU(s) started at EL2 [ 0.244789] devtmpfs: initialized [ 0.292201] Registered cp15_barrier emulation handler [ 0.292308] Registered setend emulation handler [ 0.292328] KASLR enabled [ 0.292602] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.292628] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293926] pinctrl core: initialized pinctrl subsystem [ 0.294878] SMBIOS 3.0.0 present. [ 0.294910] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.295535] NET: Registered protocol family 16 [ 0.297649] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.298155] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.298896] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.298962] audit: initializing netlink subsys (disabled) [ 0.299252] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.299722] thermal_sys: Registered thermal governor 'step_wise' [ 0.299729] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299744] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.301996] cpuidle: using governor menu [ 0.302505] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.302901] ASID allocator initialised with 32768 entries [ 0.303129] Serial: AMBA PL011 UART driver [ 0.306812] Tegra reboot handler registered. [ 0.380332] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.380491] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.380674] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.380724] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.380908] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.380971] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.381108] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.381154] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.381285] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.381332] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.383880] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.383919] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.383951] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.383981] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.384013] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.384043] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.384081] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.384112] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.384141] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.384170] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.384198] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.384227] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.384278] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.384309] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.384338] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.384388] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.384428] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.384549] mc-err: mcerr ops are set to t19x [ 0.397261] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.397284] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.397296] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.397307] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.404163] ACPI: Interpreter disabled. [ 0.405311] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.406586] iommu: Default domain type: Translated [ 0.406652] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.407092] SCSI subsystem initialized [ 0.407279] usbcore: registered new interface driver usbfs [ 0.407321] usbcore: registered new interface driver hub [ 0.407354] usbcore: registered new device driver usb [ 0.407677] mc: Linux media interface: v0.10 [ 0.407705] videodev: Linux video capture interface: v2.00 [ 0.407979] pps_core: LinuxPPS API ver. 1 registered [ 0.407991] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.408031] PTP clock support registered [ 0.408210] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.408476] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.408557] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.409123] Registered efivars operations [ 0.414772] FPGA manager framework [ 0.415034] Advanced Linux Sound Architecture Driver Initialized. [ 0.415738] Bluetooth: Core ver 2.22 [ 0.415778] NET: Registered protocol family 31 [ 0.415790] Bluetooth: HCI device and connection manager initialized [ 0.415805] Bluetooth: HCI socket layer initialized [ 0.415821] Bluetooth: L2CAP socket layer initialized [ 0.415841] Bluetooth: SCO socket layer initialized [ 0.417340] camchar: rtcpu character device driver loaded [ 0.418012] clocksource: Switched to clocksource arch_sys_counter [ 0.828970] VFS: Disk quotas dquot_6.6.0 [ 0.829067] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.829556] pnp: PnP ACPI: disabled [ 0.843163] la/ptsa driver initialized. [ 0.843330] NET: Registered protocol family 2 [ 0.843532] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.851272] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.851403] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.851781] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.852337] TCP: Hash tables configured (established 65536 bind 65536) [ 0.852522] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.852690] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.852961] NET: Registered protocol family 1 [ 0.853890] RPC: Registered named UNIX socket transport module. [ 0.853928] RPC: Registered udp transport module. [ 0.853946] RPC: Registered tcp transport module. [ 0.853964] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.853993] PCI: CLS 0 bytes, default 64 [ 0.854321] Trying to unpack rootfs image as initramfs... [ 1.116352] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.119763] Freeing initrd memory: 8196K [ 1.123930] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.123991] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.124041] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.124457] kvm [1]: IPA Size Limit: 40 bits [ 1.125086] kvm [1]: vgic interrupt IRQ9 [ 1.125698] kvm [1]: VHE mode initialized successfully [ 1.127123] Initialise system trusted keyrings [ 1.127393] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.133269] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.134160] NFS: Registering the id_resolver key type [ 1.134198] Key type id_resolver registered [ 1.134215] Key type id_legacy registered [ 1.134303] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.134364] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.134439] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.143849] NET: Registered protocol family 38 [ 1.143880] Key type asymmetric registered [ 1.143923] Asymmetric key parser 'x509' registered [ 1.143973] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.144196] io scheduler mq-deadline registered [ 1.144214] io scheduler kyber registered [ 1.149945] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.153127] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.153208] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.153280] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.153349] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.153418] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.158936] scrncapt: init (heads:4 wins:6 planes:4) [ 1.159016] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.160060] EINJ: ACPI disabled. [ 1.163377] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.163402] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.163416] tegra-pmc: ### PMC reset level: L1 [ 1.163430] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.163478] tegra-pmc: PMC Prod config success [ 1.168307] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.173264] random: fast init done [ 1.173411] printk: console [ttyTCU0] enabled [ 2.725902] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.730460] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.735269] arm-smmu 10000000.iommu: stage 1 translation [ 2.740405] arm-smmu 10000000.iommu: stage 2 translation [ 2.746167] arm-smmu 10000000.iommu: nested translation [ 2.751280] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.758681] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.768957] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.771550] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.778368] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.786038] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.791165] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.796127] arm-smmu 12000000.iommu: stage 1 translation [ 2.801406] arm-smmu 12000000.iommu: stage 2 translation [ 2.807084] arm-smmu 12000000.iommu: nested translation [ 2.812493] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.819670] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.829694] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.832789] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.839347] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.846597] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.856571] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.859520] tegra_profiler: auth: init [ 2.863763] THERMAL EST: found 3 subdevs [ 2.867445] THERMAL EST num_resources: 0 [ 2.871029] [THERMAL EST subdev 0] [ 2.874609] [THERMAL EST subdev 1] [ 2.877745] [THERMAL EST subdev 2] [ 2.881273] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.887751] THERMAL EST: thz register success. [ 2.891966] THERMAL EST: end of probe, return err: 0 [ 2.897280] nvsciipc: loaded module [ 2.904337] tun: Universal TUN/TAP device driver, 1.6 [ 2.906988] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.912829] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.918604] e1000e: Intel(R) PRO/1000 Network Driver [ 2.923527] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.929340] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.934898] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.940908] PPP generic driver version 2.4.2 [ 2.945082] PPP BSD Compression module registered [ 2.949622] PPP Deflate Compression module registered [ 2.954874] PPP MPPE Compression module registered [ 2.960143] usbcore: registered new interface driver r8152 [ 2.965385] usbcore: registered new interface driver asix [ 2.970733] usbcore: registered new interface driver ax88179_178a [ 2.976841] usbcore: registered new interface driver cdc_ether [ 2.983053] usbcore: registered new interface driver net1080 [ 2.988397] usbcore: registered new interface driver cdc_subset [ 2.994694] usbcore: registered new interface driver zaurus [ 3.000390] usbcore: registered new interface driver cdc_ncm [ 3.005806] usbcore: registered new interface driver aqc111 [ 3.011747] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.017525] ohci-pci: OHCI PCI platform driver [ 3.021827] ohci-platform: OHCI generic platform driver [ 3.027675] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.034306] usbcore: registered new interface driver uas [ 3.038380] usbcore: registered new interface driver usb-storage [ 3.044271] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.050295] mousedev: PS/2 mouse device common for all mice [ 3.055273] usbcore: registered new interface driver xpad [ 3.063528] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.066255] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.074060] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.080371] i2c /dev entries driver [ 3.083956] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.089754] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.095007] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.100735] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.105791] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.111128] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.116726] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.129585] device-mapper: uevent: version 1.0.3 [ 3.130061] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.136826] cpuidle: Initializing cpuidle driver [ 3.140914] sdhci: Secure Digital Host Controller Interface driver [ 3.145884] sdhci: Copyright(c) Pierre Ossman [ 3.149998] Synopsys Designware Multimedia Card Interface Driver [ 3.155940] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.162164] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.163025] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.175080] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.196593] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.206360] vdd-1v0: supplied by regulator-dummy [ 3.211912] vdd-1v8-hs: supplied by regulator-dummy [ 3.216763] vdd-1v8-ls: supplied by regulator-dummy [ 3.221574] vdd-1v8-ao: supplied by regulator-dummy [ 3.225679] vddio-ddr-1v1: supplied by regulator-dummy [ 3.230123] vdd-rtc: supplied by regulator-dummy [ 3.231936] spmic-ldo1: supplied by regulator-dummy [ 3.233247] vdd-ao-3v3: supplied by regulator-dummy [ 3.239464] vddio-emmc-3v3: supplied by regulator-dummy [ 3.245906] spmic-ldo4: supplied by regulator-dummy [ 3.247237] vdd-usb-3v3: supplied by regulator-dummy [ 3.253477] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.259746] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.265293] spmic-ldo8: supplied by vdd-1v8-ls [ 3.266838] gpio-510 (gpio_default): hogged as output/high [ 3.268237] gpio-511 (gpio_default): hogged as output/high [ 3.271156] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.407964] max77686-rtc max77620-rtc: registered as rtc0 [ 3.409276] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.409618] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.240365] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.241476] hid: raw HID events driver (C) Jiri Kosina [ 4.242247] usbcore: registered new interface driver usbhid [ 4.242389] usbhid: USB HID core driver [ 4.244155] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.245246] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.142250] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.217599] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.159 ms) ÿá[ 4.330399] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.331094] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.332324] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.333123] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.335351] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.336038] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.336593] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.337901] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.338356] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.340096] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.346863] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.352718] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.357926] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.364138] denver_knobs_init:MTS_VERSION:55637613 [ 4.378341] t19x_cache tegra-cache: probed [ 4.381563] optee: probing for conduit method. [ 4.382570] optee: revision 3.16 (65cc2218) [ 4.383545] optee: dynamic shared memory is enabled [ 4.385032] optee: initialized driver [ 4.392362] nvpmodel: initialized successfully [ 4.393033] tegra_hv: get_hvd: not initialized yet [ 4.397703] user_ivc_mempool: hypervisor not present [ 4.403636] usbcore: registered new interface driver snd-usb-audio [ 4.409992] u32 classifier [ 4.411557] input device check on [ 4.415150] Actions configured [ 4.418731] Initializing XFRM netlink socket [ 4.423660] NET: Registered protocol family 10 [ 4.429423] Segment Routing with IPv6 [ 4.431059] NET: Registered protocol family 17 [ 4.435282] NET: Registered protocol family 15 [ 4.439896] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.453141] Bluetooth: RFCOMM socket layer initialized [ 4.458061] Bluetooth: RFCOMM ver 1.11 [ 4.461596] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.467787] Bluetooth: HIDP socket layer initialized [ 4.473515] 9pnet: Installing 9P2000 support [ 4.477281] Key type dns_resolver registered [ 4.482665] registered taskstats version 1 [ 4.485322] Loading compiled-in X.509 certificates [ 4.498799] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.501221] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.511570] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.513279] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.522112] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.530231] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.646160] tegra194-pcie 14160000.pcie: Link up [ 4.648965] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.649254] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.649491] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.649907] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.650315] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.650811] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.651383] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.667286] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.667706] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.668188] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.669811] pci 0004:01:00.0: supports D1 D2 [ 4.669990] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.681375] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.681732] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.682196] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.682565] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.682815] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.683012] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.683290] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.688098] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.696881] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.706783] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.711578] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.717310] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.724354] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.733269] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.734640] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.743300] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.751530] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.867064] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.867587] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.867758] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.867935] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.868256] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.868493] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.868947] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.869462] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.892362] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.892735] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.894869] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.896132] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.897873] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.899878] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.900843] pci 0005:00:00.0: Removing from iommu group 7 [ 5.901113] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.936676] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.961566] host1x 13e10000.host1x: initialized [ 5.963176] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.964056] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.965309] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.966295] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.967542] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.968339] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.969815] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.970561] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.971629] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.972362] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.977203] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.984193] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.994230] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.001048] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.011099] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.017988] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.028009] falcon 15340000.vic: Adding to iommu group 17 [ 6.043221] falcon 15340000.vic: initialized [ 6.044519] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.050875] falcon 15380000.nvjpg: initialized [ 6.051796] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.061747] falcon 154c0000.nvenc: initialized [ 6.062698] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.071486] falcon 15a80000.nvenc1: initialized [ 6.072283] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.084188] nvdec 15480000.nvdec: initialized [ 6.084905] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.095754] nvdec 15140000.nvdec1: initialized [ 6.096555] tsec 15500000.tsec: Adding to iommu group 18 [ 6.103363] tsec 15500000.tsec: initialized [ 6.104153] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.109582] tsec 15100000.tsecb: initialized [ 6.114335] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.146651] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.161458] gpio-374 (wifi-enable): hogged as output/high [ 6.161804] gpio-431 (camera-control-output-low): hogged as output/low [ 6.162193] gpio-432 (camera-control-output-low): hogged as output/low [ 6.164119] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.165975] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.166658] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.168069] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.169320] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.170800] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.176003] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.185209] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.191864] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.204078] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.208992] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.214488] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.223275] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.232381] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.240764] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.247276] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.253368] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.263326] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.269294] pva 16000000.pva0: Adding to iommu group 22 [ 6.297091] pva 16000000.pva0: initialized [ 6.301954] pva 16800000.pva1: Adding to iommu group 23 [ 6.314174] pva 16800000.pva1: initialized [ 6.318352] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.331857] nvdla 15880000.nvdla0: initialized [ 6.333498] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.342857] nvdla 158c0000.nvdla1: initialized [ 6.345780] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.345909] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.346150] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.346608] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.346953] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.347085] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.347418] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.347620] tegradccommon 15200000.display-hub: dma mapping done [ 6.348043] tegradc 15200000.display: Adding to iommu group 26 [ 6.348051] tegradc 15210000.display: Adding to iommu group 26 [ 6.352788] tegra_cec 3960000.tegra_cec: probed [ 6.375837] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.383169] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.387757] kfuse 3830000.kfuse: initialized [ 6.392288] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.398579] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.405341] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.411946] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.420954] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.426387] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.435824] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.441138] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.461157] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.461647] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.464400] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.472477] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.480964] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.487839] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.495120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.502258] usb usb1: Product: xHCI Host Controller [ 6.507515] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.513785] usb usb1: SerialNumber: 3610000.xhci [ 6.519445] hub 1-0:1.0: USB hub found [ 6.522178] hub 1-0:1.0: 4 ports detected [ 6.526729] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.531766] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.539114] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.546852] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.554942] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.558165] random: crng init done [ 6.562219] usb usb2: Product: xHCI Host Controller [ 6.570376] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.576472] usb usb2: SerialNumber: 3610000.xhci [ 6.581938] hub 2-0:1.0: USB hub found [ 6.584938] hub 2-0:1.0: 4 ports detected [ 6.626350] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.632451] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.634246] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.634434] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.647746] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.648803] tegra194-cpufreq ccplex: probed with BWMGR [ 6.649916] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.650350] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.650831] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.651990] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.660068] mmc0: CQHCI version 5.10 [ 6.662047] tegra194-vi5 15c10000.vi: initialized [ 6.664079] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.665373] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.669255] generic_infoframe_type: 0x87 [ 6.675661] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.679075] tegradc 15200000.display: DT parsed successfully [ 6.687206] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.692957] tegradc 15200000.display: Display dc.000000001a45e976 registered with id=0 [ 6.699471] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.709350] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.714065] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.714071] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.722066] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.722198] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.722462] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.728690] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.735076] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.741454] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.749697] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.759437] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.764551] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.764928] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.780633] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.785129] nvethernet 2490000.ethernet: Macsec not supported [ 6.786072] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.792815] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.801499] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.809127] mmc0: Command Queue Engine enabled [ 6.809132] mmc0: periodic cache flush enabled [ 6.809143] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.809633] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.809952] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.818782] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.826450] tegradc 15200000.display: probed [ 6.830275] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.833478] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.898586] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.898753] Console: switching to colour frame buffer device 240x67 [ 6.900000] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.905087] tegradc 15200000.display: fb registered [ 6.905160] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.913004] tegra-se-nvhost 15810000.se: initialized [ 6.918445] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.927034] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.928343] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.933510] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.953734] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.957804] tegra-se-nvhost 15820000.se: initialized [ 6.965458] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.965463] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.965467] usb 1-2: Manufacturer: Generic [ 6.967755] hub 1-2:1.0: USB hub found [ 6.975765] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.979202] hub 1-2:1.0: 4 ports detected [ 6.982994] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.002520] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.016957] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.017014] tegra-se-nvhost 15830000.se: initialized [ 7.023576] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.029893] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.037078] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.043040] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.049891] Extcon AUX1(HDMI) enable [ 7.050193] tegradc 15210000.display: disp1 connected to head1->sor [ 7.056867] tegra-se-nvhost 15840000.se: initialized [ 7.059655] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.067123] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.070346] tegradc 15210000.display: DT parsed successfully [ 7.074933] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.079224] tegra_actmon d230000.actmon: in actmon_register()... [ 7.083976] tegradc 15210000.display: Display dc.0000000000b8878b registered with id=1 [ 7.089784] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.097111] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 7.103609] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.110934] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 7.115263] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.115269] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.115273] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.115276] usb 2-3: Manufacturer: Generic [ 7.116896] hvc_sysfs: hypervisor is not present [ 7.126138] hub 2-3:1.0: USB hub found [ 7.129253] tegradc 15210000.display: probed [ 7.156551] ALSA device list: [ 7.158889] hub 2-3:1.0: 4 ports detected [ 7.161202] No soundcards found. [ 7.184936] tegradc 15210000.display: fb registered ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.190178] tegradc 15200000.display: blank - powerdown [ 7.193396] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.193400] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.193408] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.236261] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.236266] Extcon AUX1(HDMI) disable [ 7.254059] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.259511] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.260343] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.271664] tegradc 15200000.display: unblank [ 7.272885] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.273069] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.278820] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.280665] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.284788] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.284792] Extcon AUX1(HDMI) enable [ 7.297406] tegradc 15200000.display: sync windows ret = 247 [ 7.328538] tegradc 15210000.display: blank - powerdown [ 7.329577] Freeing unused kernel memory: 3968K [ 7.330213] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.330217] Extcon DP: HPD disabled [ 7.330222] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.330234] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.330238] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.354798] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.354865] Run /init as init process [ 7.361749] Extcon HDMI: HPD enabled [ 7.362088] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.375371] tegradc 15200000.display: hdmi: plugged [ 7.407287] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.408903] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.410504] usb 1-3: Product: Bluetooth Radio [ 7.411920] usb 1-3: Manufacturer: Realtek [ 7.413313] usb 1-3: SerialNumber: 00e04c000001 [ 7.426258] Root device found: mmcblk0p1 [ 7.426638] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.429143] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.429631] Found dev node: /dev/mmcblk0p1 [ 7.466557] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.472309] Rootfs mounted over mmcblk0p1 [ 7.509138] Switching from initrd to actual rootfs [ 7.653148] systemd[1]: System time before build time, advancing clock. [ 7.725484] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.730696] systemd[1]: Detected architecture arm64. [ 7.770312] systemd[1]: Set hostname to . [ 7.938894] systemd-sysv-generator[249]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.292565] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.294325] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.299873] systemd[1]: Created slice system-modprobe.slice. [ 8.304410] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.309266] systemd[1]: Created slice User and Session Slice. [ 8.312711] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.316941] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.320275] systemd[1]: Reached target User and Group Name Lookups. [ 8.323442] systemd[1]: Reached target Slices. [ 8.326585] systemd[1]: Reached target Swap. [ 8.330556] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.334155] systemd[1]: Listening on Syslog Socket. [ 8.337618] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.340993] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.345199] systemd[1]: Listening on Journal Audit Socket. [ 8.348804] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.352599] systemd[1]: Listening on Journal Socket. [ 8.356275] systemd[1]: Listening on udev Control Socket. [ 8.361047] systemd[1]: Listening on udev Kernel Socket. [ 8.371201] systemd[1]: Mounting Huge Pages File System... [ 8.379667] systemd[1]: Mounting POSIX Message Queue File System... [ 8.387616] systemd[1]: Mounting RPC Pipe File System... [ 8.396366] systemd[1]: Mounting Kernel Debug File System... [ 8.404909] systemd[1]: Mounting Kernel Trace File System... [ 8.415196] systemd[1]: Starting Journal Service... [ 8.424455] systemd[1]: Starting Set the console keyboard layout... [ 8.432989] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.436688] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.443436] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.451776] systemd[1]: Started Nameserver information manager. [ 8.456595] systemd[1]: Reached target Network (Pre). [ 8.463391] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.465263] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.473494] systemd[1]: Starting Load Kernel Modules... [ 8.481157] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.489610] systemd[1]: Starting udev Coldplug all Devices... [ 8.500682] systemd[1]: Mounted Huge Pages File System. [ 8.504569] systemd[1]: Mounted POSIX Message Queue File System. [ 8.508199] systemd[1]: Mounted RPC Pipe File System. [ 8.511162] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.511836] systemd[1]: Mounted Kernel Debug File System. [ 8.514493] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.514945] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.514950] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.514964] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.514968] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.515662] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.515901] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.526262] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.527807] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.529165] systemd[1]: Mounted Kernel Trace File System. [ 8.540122] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.547607] systemd[1]: nvfb-udev.service: Succeeded. [ 8.551723] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.564087] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.575568] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.577334] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.586170] systemd[1]: Starting Load/Save Random Seed... [ 8.594529] systemd[1]: Starting Create System Users... [ 8.627550] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.627550] [ 8.651438] systemd[1]: Finished Load/Save Random Seed. [ 8.658758] systemd[1]: Finished Load Kernel Modules. [ 8.663373] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.671037] systemd[1]: Mounting Kernel Configuration File System... [ 8.679358] systemd[1]: Started OP-TEE Client Supplicant. [ 8.688615] systemd[1]: Starting Apply Kernel Variables... [ 8.698662] systemd[1]: Finished Set the console keyboard layout. [ 8.702908] systemd[1]: Mounted Kernel Configuration File System. [ 8.717185] systemd[1]: Finished Create System Users. [ 8.727910] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.039639] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.046124] imx219 9-0010: board setup failed [ 10.047525] imx219: probe of 9-0010 failed with error -121 [ 10.058586] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.069175] imx219 10-0010: board setup failed [ 10.070512] imx219: probe of 10-0010 failed with error -121 [ 10.160574] hot-surface-alert cooling state: 0 -> 1 [ 10.879680] using random self ethernet address [ 10.880964] using random host ethernet address [ 11.448805] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.448812] Creating 1 MTD partitions on "spi6.0": [ 11.448820] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.307984] using random self ethernet address [ 12.309132] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.811876] nvidia: loading out-of-tree module taints kernel. [ 58.583648] watchdog: watchdog0: watchdog did not stop! [ 59.051865] Trying to unregister non-registered hwtime source [ 62.110445] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.112005] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERÒÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/Tÿâclk_early initialized ÿäC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.481] I> register 'maxim' power off handle [0003.483] I> virtual i2c enabled [0003.483] I> registered 'maxim,max20024' pmic [0003.483] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.614] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.644] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.744] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000020] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000669] Console: colour dummy device 80x25 [ 0.002189] printk: console [tty0] enabled [ 0.002266] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002315] pid_max: default: 32768 minimum: 301 [ 0.002508] LSM: Security Framework initializing [ 0.002586] Yama: becoming mindful. [ 0.002652] SELinux: Initializing. [ 0.002814] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002850] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005824] rcu: Hierarchical SRCU implementation. [ 0.006115] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006816] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006865] DTB Build time: Aug 10 2022 20:31:49 [ 0.009577] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009855] Remapping and enabling EFI services. [ 0.011981] smp: Bringing up secondary CPUs ... [ 0.046175] Detected PIPT I-cache on CPU1 [ 0.046276] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075792] Detected PIPT I-cache on CPU2 [ 0.075942] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105677] Detected PIPT I-cache on CPU3 [ 0.105748] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135621] Detected PIPT I-cache on CPU4 [ 0.135723] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165528] Detected PIPT I-cache on CPU5 [ 0.165597] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165953] smp: Brought up 1 node, 6 CPUs [ 0.166177] SMP: Total of 6 processors activated. [ 0.166208] CPU features: detected: Privileged Access Never [ 0.166222] CPU features: detected: LSE atomic instructions [ 0.166234] CPU features: detected: User Access Override [ 0.166247] CPU features: detected: 32-bit EL0 Support [ 0.166275] CPU features: detected: RAS Extension Support [ 0.166288] CPU features: detected: CRC32 instructions [ 0.166302] CPU features: detected: 32-bit EL1 Support [ 0.233782] CPU: All CPU(s) started at EL2 [ 0.238696] devtmpfs: initialized [ 0.284242] Registered cp15_barrier emulation handler [ 0.284384] Registered setend emulation handler [ 0.284405] KASLR enabled [ 0.284606] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.284631] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286006] pinctrl core: initialized pinctrl subsystem [ 0.286968] SMBIOS 3.0.0 present. [ 0.287013] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.287692] NET: Registered protocol family 16 [ 0.289658] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.290177] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.290907] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.290972] audit: initializing netlink subsys (disabled) [ 0.291255] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.291654] thermal_sys: Registered thermal governor 'step_wise' [ 0.291661] thermal_sys: Registered thermal governor 'power_allocator' [ 0.291677] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.293922] cpuidle: using governor menu [ 0.294202] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.294656] ASID allocator initialised with 32768 entries [ 0.294898] Serial: AMBA PL011 UART driver [ 0.298131] Tegra reboot handler registered. [ 0.362398] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.362649] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.362858] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.362904] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.363025] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.363071] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.363180] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.363225] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.363357] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.363401] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.365931] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.365967] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.365995] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.366021] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.366050] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.366111] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.366139] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.366165] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.366210] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.366244] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.366271] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.366315] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.366342] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.366385] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.366412] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.366437] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.366463] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.366555] mc-err: mcerr ops are set to t19x [ 0.377842] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.377866] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.377879] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.377891] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.384963] ACPI: Interpreter disabled. [ 0.386152] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.387576] iommu: Default domain type: Translated [ 0.387637] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.388008] SCSI subsystem initialized [ 0.388202] usbcore: registered new interface driver usbfs [ 0.388243] usbcore: registered new interface driver hub [ 0.388276] usbcore: registered new device driver usb [ 0.388698] mc: Linux media interface: v0.10 [ 0.388725] videodev: Linux video capture interface: v2.00 [ 0.389219] pps_core: LinuxPPS API ver. 1 registered [ 0.389233] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.389277] PTP clock support registered [ 0.389513] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.389826] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.389913] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.390726] Registered efivars operations [ 0.396171] FPGA manager framework [ 0.396307] Advanced Linux Sound Architecture Driver Initialized. [ 0.396875] Bluetooth: Core ver 2.22 [ 0.396914] NET: Registered protocol family 31 [ 0.396926] Bluetooth: HCI device and connection manager initialized [ 0.396941] Bluetooth: HCI socket layer initialized [ 0.396956] Bluetooth: L2CAP socket layer initialized [ 0.396977] Bluetooth: SCO socket layer initialized [ 0.398636] camchar: rtcpu character device driver loaded [ 0.399345] clocksource: Switched to clocksource arch_sys_counter [ 0.698890] VFS: Disk quotas dquot_6.6.0 [ 0.698960] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.699387] pnp: PnP ACPI: disabled [ 0.711425] la/ptsa driver initialized. [ 0.711559] NET: Registered protocol family 2 [ 0.711759] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.718195] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.718270] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.718520] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.718951] TCP: Hash tables configured (established 65536 bind 65536) [ 0.719093] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.719186] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.719471] NET: Registered protocol family 1 [ 0.720108] RPC: Registered named UNIX socket transport module. [ 0.720122] RPC: Registered udp transport module. [ 0.720132] RPC: Registered tcp transport module. [ 0.720141] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.720157] PCI: CLS 0 bytes, default 64 [ 0.720361] Trying to unpack rootfs image as initramfs... [ 0.909282] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.911491] Freeing initrd memory: 8196K [ 0.915289] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.915325] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.915420] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.915793] kvm [1]: IPA Size Limit: 40 bits [ 0.916318] kvm [1]: vgic interrupt IRQ9 [ 0.916761] kvm [1]: VHE mode initialized successfully [ 0.917980] Initialise system trusted keyrings [ 0.918243] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.921869] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.922453] NFS: Registering the id_resolver key type [ 0.922499] Key type id_resolver registered [ 0.922510] Key type id_legacy registered [ 0.922584] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.922605] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.922634] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.930074] NET: Registered protocol family 38 [ 0.930094] Key type asymmetric registered [ 0.930130] Asymmetric key parser 'x509' registered [ 0.930182] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.930398] io scheduler mq-deadline registered [ 0.930413] io scheduler kyber registered [ 0.934576] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.936880] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.936943] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.936998] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.937053] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.937106] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.941003] scrncapt: init (heads:4 wins:6 planes:4) [ 0.941442] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.942016] EINJ: ACPI disabled. [ 0.944451] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.944472] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.944484] tegra-pmc: ### PMC reset level: L1 [ 0.944494] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.944533] tegra-pmc: PMC Prod config success [ 0.948943] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.953021] random: fast init done [ 0.953209] printk: console [ttyTCU0] enabled [ 2.506230] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.510166] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.514746] arm-smmu 10000000.iommu: stage 1 translation [ 2.520611] arm-smmu 10000000.iommu: stage 2 translation [ 2.525724] arm-smmu 10000000.iommu: nested translation [ 2.531360] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.538241] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.549329] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.551371] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.557926] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.565828] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.570964] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.575687] arm-smmu 12000000.iommu: stage 1 translation [ 2.581457] arm-smmu 12000000.iommu: stage 2 translation [ 2.586620] arm-smmu 12000000.iommu: nested translation [ 2.592060] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.599229] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.609962] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.612609] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.619186] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.626428] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.636258] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.639599] tegra_profiler: auth: init [ 2.643837] THERMAL EST: found 3 subdevs [ 2.646971] THERMAL EST num_resources: 0 [ 2.651115] [THERMAL EST subdev 0] [ 2.654173] [THERMAL EST subdev 1] [ 2.657584] [THERMAL EST subdev 2] [ 2.661088] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.667535] THERMAL EST: thz register success. [ 2.671795] THERMAL EST: end of probe, return err: 0 [ 2.676868] nvsciipc: loaded module [ 2.684293] tun: Universal TUN/TAP device driver, 1.6 [ 2.686877] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.692600] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.698401] e1000e: Intel(R) PRO/1000 Network Driver [ 2.703367] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.709171] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.714463] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.720690] PPP generic driver version 2.4.2 [ 2.724900] PPP BSD Compression module registered [ 2.729433] PPP Deflate Compression module registered [ 2.734677] PPP MPPE Compression module registered [ 2.739947] usbcore: registered new interface driver r8152 [ 2.745207] usbcore: registered new interface driver asix [ 2.750794] usbcore: registered new interface driver ax88179_178a [ 2.756917] usbcore: registered new interface driver cdc_ether [ 2.762607] usbcore: registered new interface driver net1080 [ 2.768205] usbcore: registered new interface driver cdc_subset [ 2.774523] usbcore: registered new interface driver zaurus [ 2.779945] usbcore: registered new interface driver cdc_ncm [ 2.785878] usbcore: registered new interface driver aqc111 [ 2.791571] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.797357] ohci-pci: OHCI PCI platform driver [ 2.801635] ohci-platform: OHCI generic platform driver [ 2.807639] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.814156] usbcore: registered new interface driver uas [ 2.818231] usbcore: registered new interface driver usb-storage [ 2.824349] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.830346] mousedev: PS/2 mouse device common for all mice [ 2.835080] usbcore: registered new interface driver xpad [ 2.843056] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.845863] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.853880] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.860241] i2c /dev entries driver [ 2.863791] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.869246] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.874885] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.880318] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.885374] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.891150] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.896530] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.910403] device-mapper: uevent: version 1.0.3 [ 2.910889] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.917105] cpuidle: Initializing cpuidle driver [ 2.920677] sdhci: Secure Digital Host Controller Interface driver [ 2.925428] sdhci: Copyright(c) Pierre Ossman [ 2.929526] Synopsys Designware Multimedia Card Interface Driver [ 2.935730] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.942050] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.942777] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.954979] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.977802] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.987447] vdd-1v0: supplied by regulator-dummy [ 2.992906] vdd-1v8-hs: supplied by regulator-dummy [ 2.997699] vdd-1v8-ls: supplied by regulator-dummy [ 3.002500] vdd-1v8-ao: supplied by regulator-dummy [ 3.006462] vddio-ddr-1v1: supplied by regulator-dummy [ 3.010948] vdd-rtc: supplied by regulator-dummy [ 3.012746] spmic-ldo1: supplied by regulator-dummy [ 3.013993] vdd-ao-3v3: supplied by regulator-dummy [ 3.020163] vddio-emmc-3v3: supplied by regulator-dummy [ 3.026527] spmic-ldo4: supplied by regulator-dummy [ 3.027783] vdd-usb-3v3: supplied by regulator-dummy [ 3.033975] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.040160] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.045736] spmic-ldo8: supplied by vdd-1v8-ls [ 3.047199] gpio-510 (gpio_default): hogged as output/high [ 3.048622] gpio-511 (gpio_default): hogged as output/high [ 3.051543] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.187641] max77686-rtc max77620-rtc: registered as rtc0 [ 3.188721] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.189064] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.038862] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.040139] hid: raw HID events driver (C) Jiri Kosina [ 4.040934] usbcore: registered new interface driver usbhid [ 4.041072] usbhid: USB HID core driver [ 4.043248] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.044656] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.119740] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.193934] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.775 ms, total boot 74.999 ms) ÿá[ 4.129349] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.129961] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.131056] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.131814] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.133543] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.134164] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.134748] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.136241] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.136475] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.139102] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.145516] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.151960] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.156985] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.162595] denver_knobs_init:MTS_VERSION:55637613 [ 4.179009] t19x_cache tegra-cache: probed [ 4.182602] optee: probing for conduit method. [ 4.183518] optee: revision 3.16 (65cc2218) [ 4.184525] optee: dynamic shared memory is enabled [ 4.185820] optee: initialized driver [ 4.191959] nvpmodel: initialized successfully [ 4.192680] tegra_hv: get_hvd: not initialized yet [ 4.195934] user_ivc_mempool: hypervisor not present [ 4.202355] usbcore: registered new interface driver snd-usb-audio [ 4.208477] u32 classifier [ 4.209931] input device check on [ 4.213639] Actions configured [ 4.216998] Initializing XFRM netlink socket [ 4.221947] NET: Registered protocol family 10 [ 4.229551] Segment Routing with IPv6 [ 4.229903] NET: Registered protocol family 17 [ 4.233924] NET: Registered protocol family 15 [ 4.237998] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.251864] Bluetooth: RFCOMM socket layer initialized [ 4.256519] Bluetooth: RFCOMM ver 1.11 [ 4.260135] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.266238] Bluetooth: HIDP socket layer initialized [ 4.272006] 9pnet: Installing 9P2000 support [ 4.275738] Key type dns_resolver registered [ 4.280879] registered taskstats version 1 [ 4.284110] Loading compiled-in X.509 certificates [ 4.297629] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.299988] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.309805] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.312139] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.320408] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.328990] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.443529] tegra194-pcie 14160000.pcie: Link up [ 4.446561] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.446816] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.446949] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.447163] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.447432] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.447964] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.448472] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.461683] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.462172] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.462799] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.464497] pci 0004:01:00.0: supports D1 D2 [ 4.464723] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.476824] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.477072] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.477425] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.477862] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.478114] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.478312] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.478623] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.485508] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.494262] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.504684] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.508834] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.514801] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.521822] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.531217] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.532002] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.540660] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.548968] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.664382] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.664906] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.665140] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.665267] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.665582] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.665748] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.666214] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.666668] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.690079] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.690404] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.692384] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.693612] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.695588] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.697371] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.698375] pci 0005:00:00.0: Removing from iommu group 7 [ 5.698868] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.737602] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.760569] host1x 13e10000.host1x: initialized [ 5.762455] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.763269] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.764416] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.765088] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.766086] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.766869] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.767889] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.768587] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.769591] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.770253] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.774634] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.781281] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.791483] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.798338] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.808328] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.815578] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.825464] falcon 15340000.vic: Adding to iommu group 17 [ 5.839619] falcon 15340000.vic: initialized [ 5.840815] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.846594] falcon 15380000.nvjpg: initialized [ 5.847224] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.857905] falcon 154c0000.nvenc: initialized [ 5.858686] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.867800] falcon 15a80000.nvenc1: initialized [ 5.868495] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.881044] nvdec 15480000.nvdec: initialized [ 5.881723] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.891805] nvdec 15140000.nvdec1: initialized [ 5.892351] tsec 15500000.tsec: Adding to iommu group 18 [ 5.898571] tsec 15500000.tsec: initialized [ 5.899063] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.905428] tsec 15100000.tsecb: initialized [ 5.909641] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.938474] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.951761] gpio-374 (wifi-enable): hogged as output/high [ 5.952097] gpio-431 (camera-control-output-low): hogged as output/low [ 5.952481] gpio-432 (camera-control-output-low): hogged as output/low [ 5.954108] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.955981] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.956581] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.958025] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.961816] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.967795] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.973601] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.982306] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.988857] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.000845] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.005719] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.011666] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.020566] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.029526] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.037082] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.044581] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.050580] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.060421] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.066751] pva 16000000.pva0: Adding to iommu group 22 [ 6.095141] pva 16000000.pva0: initialized [ 6.100045] pva 16800000.pva1: Adding to iommu group 23 [ 6.111157] pva 16800000.pva1: initialized [ 6.115584] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.137095] nvdla 15880000.nvdla0: initialized [ 6.138528] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.148103] nvdla 158c0000.nvdla1: initialized [ 6.151327] tegradc 15200000.display: Adding to iommu group 26 [ 6.162204] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.162663] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.164081] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.164444] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.165052] tegradccommon 15200000.display-hub: dma mapping done [ 6.165459] tegradc 15210000.display: Adding to iommu group 26 [ 6.165508] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.166420] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.167537] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.167809] tegra_cec 3960000.tegra_cec: probed [ 6.173135] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.180125] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.185265] kfuse 3830000.kfuse: initialized [ 6.189592] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.195764] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.202663] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.209079] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.218341] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.223915] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.233223] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.238997] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.259457] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.259857] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.261563] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.269568] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.278508] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.284754] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.292623] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.299851] usb usb1: Product: xHCI Host Controller [ 6.304508] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.310804] usb usb1: SerialNumber: 3610000.xhci [ 6.316382] hub 1-0:1.0: USB hub found [ 6.319657] hub 1-0:1.0: 4 ports detected [ 6.324253] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.328766] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.336634] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.344440] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.352221] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.359478] usb usb2: Product: xHCI Host Controller [ 6.364176] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.370394] usb usb2: SerialNumber: 3610000.xhci [ 6.375845] hub 2-0:1.0: USB hub found [ 6.378827] hub 2-0:1.0: 4 ports detected [ 6.423753] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.430331] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.431993] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.432150] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.445973] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.447112] tegra194-cpufreq ccplex: probed with BWMGR [ 6.448440] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.448914] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.449452] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.450708] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.458052] tegra194-vi5 15c10000.vi: initialized [ 6.459757] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.459891] mmc0: CQHCI version 5.10 [ 6.460138] generic_infoframe_type: 0x87 [ 6.464376] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.466643] tegradc 15200000.display: DT parsed successfully [ 6.473621] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.478954] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.487094] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.495576] random: crng init done [ 6.501371] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.504758] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.511390] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.519362] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.519480] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.519485] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.519855] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.525873] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.531418] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.534097] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.541896] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.550453] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.556051] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.557279] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.563845] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.575151] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.591395] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.594960] tegradc 15200000.display: probed [ 6.599805] nvethernet 2490000.ethernet: Macsec not supported [ 6.639598] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.648968] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.650541] mmc0: Command Queue Engine enabled [ 6.653254] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.657304] mmc0: periodic cache flush enabled [ 6.664974] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.669126] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.677211] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.682977] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.693488] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.693598] Console: switching to colour frame buffer device 240x67 [ 6.695640] tegra-se-nvhost 15810000.se: initialized [ 6.700374] tegradc 15200000.display: fb registered [ 6.705797] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.712226] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.716538] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.725138] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.731836] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.737466] tegra-se-nvhost 15820000.se: initialized [ 6.743039] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.750134] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.765875] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.771130] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.772407] tegra-se-nvhost 15830000.se: initialized [ 6.780084] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.786240] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.792593] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.799009] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.803428] usb 1-2: Manufacturer: Generic [ 6.805542] hub 1-2:1.0: USB hub found [ 6.810399] tegra-se-nvhost 15840000.se: initialized [ 6.817782] hub 1-2:1.0: 4 ports detected [ 6.822581] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.823796] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.824465] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.826068] tegra_actmon d230000.actmon: in actmon_register()... [ 6.826224] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.827253] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.835640] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.868638] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.877383] hvc_sysfs: hypervisor is not present [ 6.883504] Extcon AUX1(HDMI) enable [ 6.888329] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.891974] tegradc 15210000.display: disp1 connected to head1->sor [ 6.905461] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.913017] tegradc 15210000.display: DT parsed successfully [ 6.918202] tegradc 15210000.display: Display dc.000000007057fe30 registered with id=1 [ 6.942773] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.943031] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.943216] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.946297] ALSA device list: [ 6.946574] usb 2-3: Manufacturer: Generic [ 6.946698] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.946705] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.949642] No soundcards found. [ 6.953704] tegradc 15210000.display: probed [ 6.964441] hub 2-3:1.0: USB hub found [ 6.978128] tegradc 15210000.display: fb registered [ 6.980045] hub 2-3:1.0: 4 ports detected [ 6.981536] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.981541] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.981549] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.007601] tegradc 15210000.display: blank - powerdown [ 7.012793] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.020799] Extcon DP: HPD disabled [ 7.021727] Freeing unused kernel memory: 3968K [ 7.024417] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.029211] Run /init as init process [ 7.036008] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.045147] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.057354] tegradc 15200000.display: blank - powerdown [ 7.067400] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.098146] Root device found: mmcblk0p1 [ 7.100225] Found dev node: /dev/mmcblk0p1 [ 7.106377] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.106382] Extcon AUX1(HDMI) disable [ 7.129904] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.130765] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.136631] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.140729] Rootfs mounted over mmcblk0p1 [ 7.142805] tegradc 15200000.display: unblank [ 7.144148] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.144374] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.150780] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.152736] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.156792] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.156796] Extcon AUX1(HDMI) enable [ 7.167409] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.169564] tegradc 15200000.display: sync windows ret = 247 [ 7.176484] Switching from initrd to actual rootfs [ 7.205086] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.206658] Extcon HDMI: HPD enabled [ 7.208084] tegradc 15200000.display: hdmi: plugged [ 7.216615] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.219727] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.227321] usb 1-3: Product: Bluetooth Radio [ 7.231440] usb 1-3: Manufacturer: Realtek [ 7.231942] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.235716] usb 1-3: SerialNumber: 00e04c000001 [ 7.246840] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.374137] systemd[1]: System time before build time, advancing clock. [ 7.445995] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.451061] systemd[1]: Detected architecture arm64. [ 7.500300] systemd[1]: Set hostname to . [ 7.669305] systemd-sysv-generator[252]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.014001] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.015835] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.021522] systemd[1]: Created slice system-modprobe.slice. [ 8.026256] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.030494] systemd[1]: Created slice User and Session Slice. [ 8.033981] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.038332] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.041746] systemd[1]: Reached target User and Group Name Lookups. [ 8.045026] systemd[1]: Reached target Slices. [ 8.048238] systemd[1]: Reached target Swap. [ 8.052282] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.057744] systemd[1]: Listening on Syslog Socket. [ 8.063243] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.068938] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.075769] systemd[1]: Listening on Journal Audit Socket. [ 8.081916] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.087274] systemd[1]: Listening on Journal Socket. [ 8.091033] systemd[1]: Listening on udev Control Socket. [ 8.094593] systemd[1]: Listening on udev Kernel Socket. [ 8.103024] systemd[1]: Mounting Huge Pages File System... [ 8.111493] systemd[1]: Mounting POSIX Message Queue File System... [ 8.119496] systemd[1]: Mounting RPC Pipe File System... [ 8.128116] systemd[1]: Mounting Kernel Debug File System... [ 8.136720] systemd[1]: Mounting Kernel Trace File System... [ 8.146808] systemd[1]: Starting Journal Service... [ 8.156069] systemd[1]: Starting Set the console keyboard layout... [ 8.164876] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.168489] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.176547] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.185318] systemd[1]: Started Nameserver information manager. [ 8.190050] systemd[1]: Reached target Network (Pre). [ 8.197971] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.199874] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.207981] systemd[1]: Starting Load Kernel Modules... [ 8.215989] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.224084] systemd[1]: Starting udev Coldplug all Devices... [ 8.235293] systemd[1]: Mounted Huge Pages File System. [ 8.239225] systemd[1]: Mounted POSIX Message Queue File System. [ 8.243080] systemd[1]: Mounted RPC Pipe File System. [ 8.245038] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.247672] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.249900] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.251538] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.253103] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.254459] systemd[1]: Mounted Kernel Debug File System. [ 8.254509] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.257750] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.257889] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.258056] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.258063] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.265751] systemd[1]: Mounted Kernel Trace File System. [ 8.272320] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.278333] systemd[1]: nvfb-udev.service: Succeeded. [ 8.282507] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.292372] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.304834] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.306658] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.312732] systemd[1]: Starting Load/Save Random Seed... [ 8.322676] systemd[1]: Starting Create System Users... [ 8.349342] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.349342] [ 8.380340] systemd[1]: Finished Load/Save Random Seed. [ 8.394003] systemd[1]: Finished Load Kernel Modules. [ 8.401152] systemd[1]: Finished Create System Users. [ 8.406243] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.413260] systemd[1]: Mounting Kernel Configuration File System... [ 8.421984] systemd[1]: Started OP-TEE Client Supplicant. [ 8.430590] systemd[1]: Starting Apply Kernel Variables... [ 8.438414] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.448809] systemd[1]: Finished Set the console keyboard layout. [ 8.452942] systemd[1]: Mounted Kernel Configuration File System. [ 9.873110] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.879643] imx219 9-0010: board setup failed [ 9.880928] imx219: probe of 9-0010 failed with error -121 [ 9.899087] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.908572] imx219 10-0010: board setup failed [ 9.909855] imx219: probe of 10-0010 failed with error -121 [ 9.962573] hot-surface-alert cooling state: 0 -> 1 [ 10.642475] using random self ethernet address [ 10.646272] using random host ethernet address [ 11.539828] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.539835] Creating 1 MTD partitions on "spi6.0": [ 11.539845] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.182490] using random self ethernet address [ 12.184149] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.774324] nvidia: loading out-of-tree module taints kernel. [ 58.313310] watchdog: watchdog0: watchdog did not stop! [ 58.784237] Trying to unregister non-registered hwtime source [ 61.843600] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.845725] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxswàÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.361] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.340] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.345] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.614] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.631] I> edid read success [0003.644] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.644] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.683] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.743] initializing target [0003.744] calling apps_init() [0003.744] starting app kernel_boot_app [0003.745] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000770] Console: colour dummy device 80x25 [ 0.002114] printk: console [tty0] enabled [ 0.002180] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002216] pid_max: default: 32768 minimum: 301 [ 0.002416] LSM: Security Framework initializing [ 0.002486] Yama: becoming mindful. [ 0.002541] SELinux: Initializing. [ 0.002720] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002765] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005911] rcu: Hierarchical SRCU implementation. [ 0.006188] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007179] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007229] DTB Build time: Aug 10 2022 20:31:49 [ 0.010676] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011015] Remapping and enabling EFI services. [ 0.013528] smp: Bringing up secondary CPUs ... [ 0.045561] Detected PIPT I-cache on CPU1 [ 0.045658] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.077158] Detected PIPT I-cache on CPU2 [ 0.077298] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.106850] Detected PIPT I-cache on CPU3 [ 0.106937] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.136656] Detected PIPT I-cache on CPU4 [ 0.136767] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.166433] Detected PIPT I-cache on CPU5 [ 0.166622] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166948] smp: Brought up 1 node, 6 CPUs [ 0.167119] SMP: Total of 6 processors activated. [ 0.167198] CPU features: detected: Privileged Access Never [ 0.167227] CPU features: detected: LSE atomic instructions [ 0.167262] CPU features: detected: User Access Override [ 0.167281] CPU features: detected: 32-bit EL0 Support [ 0.167314] CPU features: detected: RAS Extension Support [ 0.167347] CPU features: detected: CRC32 instructions [ 0.167365] CPU features: detected: 32-bit EL1 Support [ 0.239026] CPU: All CPU(s) started at EL2 [ 0.244430] devtmpfs: initialized [ 0.290786] Registered cp15_barrier emulation handler [ 0.290922] Registered setend emulation handler [ 0.290944] KASLR enabled [ 0.291231] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291252] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292575] pinctrl core: initialized pinctrl subsystem [ 0.293589] SMBIOS 3.0.0 present. [ 0.293616] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294242] NET: Registered protocol family 16 [ 0.296209] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296711] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297397] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297452] audit: initializing netlink subsys (disabled) [ 0.297728] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.298138] thermal_sys: Registered thermal governor 'step_wise' [ 0.298144] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298159] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300372] cpuidle: using governor menu [ 0.300773] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.301271] ASID allocator initialised with 32768 entries [ 0.301537] Serial: AMBA PL011 UART driver [ 0.305607] Tegra reboot handler registered. [ 0.376855] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.376963] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.377138] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.377180] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.377334] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.377392] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.377502] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.377542] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.377653] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.377707] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.380107] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.380142] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.380172] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.380200] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.380231] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.380258] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.380298] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.380332] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.380378] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.380418] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.380443] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.380488] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.380512] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.380536] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.380560] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.380583] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.380607] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.380693] mc-err: mcerr ops are set to t19x [ 0.392613] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392633] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.392646] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392657] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399155] ACPI: Interpreter disabled. [ 0.400294] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.401501] iommu: Default domain type: Translated [ 0.401561] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.401905] SCSI subsystem initialized [ 0.402056] usbcore: registered new interface driver usbfs [ 0.402102] usbcore: registered new interface driver hub [ 0.402135] usbcore: registered new device driver usb [ 0.402587] mc: Linux media interface: v0.10 [ 0.402615] videodev: Linux video capture interface: v2.00 [ 0.402919] pps_core: LinuxPPS API ver. 1 registered [ 0.402930] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.402949] PTP clock support registered [ 0.403180] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.403514] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.403597] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.404373] Registered efivars operations [ 0.409727] FPGA manager framework [ 0.409836] Advanced Linux Sound Architecture Driver Initialized. [ 0.410461] Bluetooth: Core ver 2.22 [ 0.410507] NET: Registered protocol family 31 [ 0.410519] Bluetooth: HCI device and connection manager initialized [ 0.410534] Bluetooth: HCI socket layer initialized [ 0.410549] Bluetooth: L2CAP socket layer initialized [ 0.410570] Bluetooth: SCO socket layer initialized [ 0.412393] camchar: rtcpu character device driver loaded [ 0.413084] clocksource: Switched to clocksource arch_sys_counter [ 0.697310] VFS: Disk quotas dquot_6.6.0 [ 0.697407] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.697738] pnp: PnP ACPI: disabled [ 0.709571] la/ptsa driver initialized. [ 0.709722] NET: Registered protocol family 2 [ 0.709898] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.715048] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.715153] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.715415] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.715846] TCP: Hash tables configured (established 65536 bind 65536) [ 0.715979] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.716067] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.716277] NET: Registered protocol family 1 [ 0.717161] RPC: Registered named UNIX socket transport module. [ 0.717189] RPC: Registered udp transport module. [ 0.717202] RPC: Registered tcp transport module. [ 0.717215] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.717238] PCI: CLS 0 bytes, default 64 [ 0.717510] Trying to unpack rootfs image as initramfs... [ 0.989723] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.992928] Freeing initrd memory: 8196K [ 0.997759] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.997792] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.997863] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.998255] kvm [1]: IPA Size Limit: 40 bits [ 0.998863] kvm [1]: vgic interrupt IRQ9 [ 0.999445] kvm [1]: VHE mode initialized successfully [ 1.001163] Initialise system trusted keyrings [ 1.001502] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.008160] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.009057] NFS: Registering the id_resolver key type [ 1.009164] Key type id_resolver registered [ 1.009188] Key type id_legacy registered [ 1.009315] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.009341] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.009410] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.019588] NET: Registered protocol family 38 [ 1.019615] Key type asymmetric registered [ 1.019630] Asymmetric key parser 'x509' registered [ 1.019692] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.019909] io scheduler mq-deadline registered [ 1.019963] io scheduler kyber registered [ 1.026098] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.029222] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.029300] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.029369] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.029435] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.029502] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.035413] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.035439] scrncapt: init (heads:4 wins:6 planes:4) [ 1.036605] EINJ: ACPI disabled. [ 1.040298] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.040324] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.040363] tegra-pmc: ### PMC reset level: L1 [ 1.040377] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.040422] tegra-pmc: PMC Prod config success [ 1.045742] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.072752] random: fast init done [ 1.073796] printk: console [ttyTCU0] enabled [ 2.603111] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.607617] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.612204] arm-smmu 10000000.iommu: stage 1 translation [ 2.617594] arm-smmu 10000000.iommu: stage 2 translation [ 2.623366] arm-smmu 10000000.iommu: nested translation [ 2.628443] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.635629] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.647079] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.648976] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.655304] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.663269] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.668342] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.673107] arm-smmu 12000000.iommu: stage 1 translation [ 2.678833] arm-smmu 12000000.iommu: stage 2 translation [ 2.684269] arm-smmu 12000000.iommu: nested translation [ 2.689428] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.696606] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.708017] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.709990] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.716290] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.723692] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.733634] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.736978] tegra_profiler: auth: init [ 2.741269] THERMAL EST: found 3 subdevs [ 2.744612] THERMAL EST num_resources: 0 [ 2.748228] [THERMAL EST subdev 0] [ 2.751806] [THERMAL EST subdev 1] [ 2.754962] [THERMAL EST subdev 2] [ 2.758461] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.764954] THERMAL EST: thz register success. [ 2.769164] THERMAL EST: end of probe, return err: 0 [ 2.774391] nvsciipc: loaded module [ 2.781386] tun: Universal TUN/TAP device driver, 1.6 [ 2.783671] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.789970] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.795785] e1000e: Intel(R) PRO/1000 Network Driver [ 2.800718] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.806825] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.812094] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.818363] PPP generic driver version 2.4.2 [ 2.822538] PPP BSD Compression module registered [ 2.827074] PPP Deflate Compression module registered [ 2.832321] PPP MPPE Compression module registered [ 2.837103] usbcore: registered new interface driver r8152 [ 2.842844] usbcore: registered new interface driver asix [ 2.848196] usbcore: registered new interface driver ax88179_178a [ 2.854062] usbcore: registered new interface driver cdc_ether [ 2.860246] usbcore: registered new interface driver net1080 [ 2.865864] usbcore: registered new interface driver cdc_subset [ 2.871631] usbcore: registered new interface driver zaurus [ 2.877352] usbcore: registered new interface driver cdc_ncm [ 2.883032] usbcore: registered new interface driver aqc111 [ 2.888672] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.894720] ohci-pci: OHCI PCI platform driver [ 2.899283] ohci-platform: OHCI generic platform driver [ 2.904834] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.911143] usbcore: registered new interface driver uas [ 2.915322] usbcore: registered new interface driver usb-storage [ 2.921693] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.927687] mousedev: PS/2 mouse device common for all mice [ 2.932472] usbcore: registered new interface driver xpad [ 2.940735] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.943486] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.951278] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.957567] i2c /dev entries driver [ 2.960882] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.966728] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.972226] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.977670] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.983017] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.988495] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.993929] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.006939] device-mapper: uevent: version 1.0.3 [ 3.007382] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.014525] cpuidle: Initializing cpuidle driver [ 3.018197] sdhci: Secure Digital Host Controller Interface driver [ 3.022819] sdhci: Copyright(c) Pierre Ossman [ 3.027171] Synopsys Designware Multimedia Card Interface Driver [ 3.033154] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.039292] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.040116] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.052660] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.074803] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.084793] vdd-1v0: supplied by regulator-dummy [ 3.090424] vdd-1v8-hs: supplied by regulator-dummy [ 3.095257] vdd-1v8-ls: supplied by regulator-dummy [ 3.100177] vdd-1v8-ao: supplied by regulator-dummy [ 3.104151] vddio-ddr-1v1: supplied by regulator-dummy [ 3.108770] vdd-rtc: supplied by regulator-dummy [ 3.110558] spmic-ldo1: supplied by regulator-dummy [ 3.111840] vdd-ao-3v3: supplied by regulator-dummy [ 3.118209] vddio-emmc-3v3: supplied by regulator-dummy [ 3.124535] spmic-ldo4: supplied by regulator-dummy [ 3.125910] vdd-usb-3v3: supplied by regulator-dummy [ 3.132150] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.138445] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.144112] spmic-ldo8: supplied by vdd-1v8-ls [ 3.145670] gpio-510 (gpio_default): hogged as output/high [ 3.147100] gpio-511 (gpio_default): hogged as output/high [ 3.150035] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.286007] max77686-rtc max77620-rtc: registered as rtc0 [ 3.287391] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.287769] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.117423] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.118629] hid: raw HID events driver (C) Jiri Kosina [ 4.119391] usbcore: registered new interface driver usbhid [ 4.119544] usbhid: USB HID core driver [ 4.122040] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.123471] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.085667] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.159555] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.697 ms) ÿá[ 4.207861] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.208437] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.209655] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.210354] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.212071] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.212778] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.213396] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.214818] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.215042] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.217698] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.223833] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.230563] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.235530] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.242336] denver_knobs_init:MTS_VERSION:55637613 [ 4.253677] t19x_cache tegra-cache: probed [ 4.256603] optee: probing for conduit method. [ 4.257551] optee: revision 3.16 (65cc2218) [ 4.258551] optee: dynamic shared memory is enabled [ 4.262250] optee: initialized driver [ 4.268782] nvpmodel: initialized successfully [ 4.269871] tegra_hv: get_hvd: not initialized yet [ 4.274460] user_ivc_mempool: hypervisor not present [ 4.280738] usbcore: registered new interface driver snd-usb-audio [ 4.287163] u32 classifier [ 4.288485] input device check on [ 4.292369] Actions configured [ 4.295710] Initializing XFRM netlink socket [ 4.300462] NET: Registered protocol family 10 [ 4.307315] Segment Routing with IPv6 [ 4.308097] NET: Registered protocol family 17 [ 4.312224] NET: Registered protocol family 15 [ 4.316958] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.330032] Bluetooth: RFCOMM socket layer initialized [ 4.334904] Bluetooth: RFCOMM ver 1.11 [ 4.338938] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.344544] Bluetooth: HIDP socket layer initialized [ 4.350524] 9pnet: Installing 9P2000 support [ 4.354219] Key type dns_resolver registered [ 4.359587] registered taskstats version 1 [ 4.362700] Loading compiled-in X.509 certificates [ 4.375232] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.378395] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.388185] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.390386] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.399156] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.407272] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.525196] tegra194-pcie 14160000.pcie: Link up [ 4.528242] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.528437] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.528569] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.528816] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.529067] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.529560] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.530058] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.543622] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.544107] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.544583] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.546263] pci 0004:01:00.0: supports D1 D2 [ 4.546479] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.559478] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.559771] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.560091] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.560533] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.560799] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.560979] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.561370] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.567191] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.575962] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.586563] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.591050] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.596515] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.603402] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.612436] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.613719] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.622391] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.630617] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.745921] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.746588] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.746851] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.747006] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.747289] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.747491] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.747860] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.748279] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.764380] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.764787] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.766700] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.767994] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.768993] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.770715] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.771471] pci 0005:00:00.0: Removing from iommu group 7 [ 5.771736] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.799998] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.821706] host1x 13e10000.host1x: initialized [ 5.823145] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.824099] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.825510] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.826300] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.827362] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.828275] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.829418] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.829978] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.839034] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.846188] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.855986] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.863187] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.872930] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.879992] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.889923] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.897380] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.906885] falcon 15340000.vic: Adding to iommu group 17 [ 5.920737] falcon 15340000.vic: initialized [ 5.921798] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.927050] falcon 15380000.nvjpg: initialized [ 5.927614] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.940317] falcon 154c0000.nvenc: initialized [ 5.940923] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.949906] falcon 15a80000.nvenc1: initialized [ 5.950544] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.962000] nvdec 15480000.nvdec: initialized [ 5.962646] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.972238] nvdec 15140000.nvdec1: initialized [ 5.972769] tsec 15500000.tsec: Adding to iommu group 18 [ 5.978441] tsec 15500000.tsec: initialized [ 5.978975] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.987171] tsec 15100000.tsecb: initialized [ 5.990997] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.016022] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.026712] gpio-374 (wifi-enable): hogged as output/high [ 6.027046] gpio-431 (camera-control-output-low): hogged as output/low [ 6.027304] gpio-432 (camera-control-output-low): hogged as output/low [ 6.028906] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.030592] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.031549] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.038414] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.043508] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.049304] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.054868] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.062755] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.070529] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.082209] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.087375] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.093223] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.102089] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.111293] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.118406] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.126137] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.132386] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.141988] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.147989] pva 16000000.pva0: Adding to iommu group 22 [ 6.173696] pva 16000000.pva0: initialized [ 6.178978] pva 16800000.pva1: Adding to iommu group 23 [ 6.189816] pva 16800000.pva1: initialized [ 6.194463] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.207345] nvdla 15880000.nvdla0: initialized [ 6.208674] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.216708] nvdla 158c0000.nvdla1: initialized [ 6.219160] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.219466] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.219789] tegradccommon 15200000.display-hub: dma mapping done [ 6.221622] tegradc 15200000.display: Adding to iommu group 26 [ 6.229208] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.229619] generic_infoframe_type: 0x87 [ 6.229882] tegradc 15200000.display: DT parsed successfully [ 6.230161] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.237330] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.240955] tegradc 15210000.display: Adding to iommu group 26 [ 6.244554] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.256191] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.262311] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.262884] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.270068] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.270073] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.284092] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.292035] tegra_cec 3960000.tegra_cec: probed [ 6.292998] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.297782] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.302810] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.320754] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.321975] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.338579] kfuse 3830000.kfuse: initialized [ 6.343046] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.343059] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.343078] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.363147] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.363500] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.371752] tegradc 15210000.display: disp0 connected to head1->sor [ 6.376204] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.382140] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.392146] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.398075] tegradc 15210000.display: DT parsed successfully [ 6.404569] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.409467] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.427234] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.432555] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.452727] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.453072] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.455705] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.464165] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.472685] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.479499] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.487104] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.494259] usb usb1: Product: xHCI Host Controller [ 6.499252] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.505552] usb usb1: SerialNumber: 3610000.xhci [ 6.510913] hub 1-0:1.0: USB hub found [ 6.513883] hub 1-0:1.0: 4 ports detected [ 6.518425] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.523494] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.530863] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.538618] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.546707] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.553959] usb usb2: Product: xHCI Host Controller [ 6.558963] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.564852] usb usb2: SerialNumber: 3610000.xhci [ 6.570425] hub 2-0:1.0: USB hub found [ 6.573323] hub 2-0:1.0: 4 ports detected [ 6.613627] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.619190] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.620436] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.620693] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.634404] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.635387] tegra194-cpufreq ccplex: probed with BWMGR [ 6.636631] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.637422] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.637981] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.639289] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.648878] mmc0: CQHCI version 5.10 [ 6.649804] tegra194-vi5 15c10000.vi: initialized [ 6.652189] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.653633] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.657201] generic_infoframe_type: 0x87 [ 6.663980] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.667589] tegradc 15200000.display: DT parsed successfully [ 6.675720] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.679467] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.681239] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.687777] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.696177] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.703440] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.703451] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.710033] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.725145] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.731134] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.739779] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.746582] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.753760] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.774132] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.775003] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.780477] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.789123] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.793347] mmc0: Command Queue Engine enabled [ 6.793351] mmc0: periodic cache flush enabled [ 6.793367] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.793915] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.794090] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.798179] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.800260] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.809754] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.813959] nvethernet 2490000.ethernet: Macsec not supported [ 6.815691] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.823006] tegradc 15200000.display: probed [ 6.826481] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.879790] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.886860] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.893691] Console: switching to colour frame buffer device 240x67 [ 6.894746] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.899385] tegradc 15200000.display: fb registered [ 6.910727] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.918134] tegra-se-nvhost 15810000.se: initialized [ 6.918369] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.927956] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.938158] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.940266] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.946284] tegra-se-nvhost 15820000.se: initialized [ 6.952970] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.957455] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.964000] tegra-se-nvhost 15830000.se: initialized [ 6.964689] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.969625] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.976543] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.983401] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.990097] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.990108] usb 1-2: Manufacturer: Generic [ 6.997137] tegra-se-nvhost 15840000.se: initialized [ 7.001892] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.006817] hub 1-2:1.0: USB hub found [ 7.007278] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.008949] tegra_actmon d230000.actmon: in actmon_register()... [ 7.009133] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.009491] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.010197] hvc_sysfs: hypervisor is not present [ 7.010941] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.010949] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.011533] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.011537] Extcon AUX1(HDMI) enable [ 7.011646] tegradc 15210000.display: disp1 connected to head1->sor [ 7.011756] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.011802] tegradc 15210000.display: DT parsed successfully [ 7.011833] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.011928] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.011934] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.018370] tegradc 15210000.display: probed [ 7.020062] hub 1-2:1.0: 4 ports detected [ 7.048916] ALSA device list: [ 7.085984] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.092462] No soundcards found. [ 7.141060] tegradc 15210000.display: fb registered [ 7.145176] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.153544] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.154395] Freeing unused kernel memory: 3968K [ 7.161224] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.171334] tegradc 15210000.display: blank - powerdown [ 7.173194] Run /init as init process [ 7.176452] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.188190] Extcon DP: HPD disabled [ 7.188196] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.188209] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.188214] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.188299] tegradc 15200000.display: blank - powerdown [ 7.200708] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.200714] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.200733] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.200739] usb 2-3: Manufacturer: Generic [ 7.211416] hub 2-3:1.0: USB hub found [ 7.213572] hub 2-3:1.0: 4 ports detected [ 7.235609] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.235613] Extcon AUX1(HDMI) disable [ 7.258953] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.259804] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.271824] tegradc 15200000.display: unblank [ 7.272904] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.273099] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.279202] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.281095] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.285206] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.285209] Extcon AUX1(HDMI) enable [ 7.297852] tegradc 15200000.display: sync windows ret = 247 [ 7.321141] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.347754] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.354869] Extcon HDMI: HPD enabled [ 7.358285] tegradc 15200000.display: hdmi: plugged [ 7.361168] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.398643] Root device found: mmcblk0p1 [ 7.402086] Found dev node: /dev/mmcblk0p1 [ 7.409515] random: crng init done [ 7.425764] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.427163] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.439640] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.445016] Rootfs mounted over mmcblk0p1 [ 7.488333] Switching from initrd to actual rootfs [ 7.502465] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.503961] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.505349] usb 1-3: Product: Bluetooth Radio [ 7.506642] usb 1-3: Manufacturer: Realtek [ 7.507919] usb 1-3: SerialNumber: 00e04c000001 [ 7.659166] systemd[1]: System time before build time, advancing clock. [ 7.729955] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.735083] systemd[1]: Detected architecture arm64. [ 7.781828] systemd[1]: Set hostname to . [ 7.951254] systemd-sysv-generator[253]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.299129] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.300863] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.306514] systemd[1]: Created slice system-modprobe.slice. [ 8.311277] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.315640] systemd[1]: Created slice User and Session Slice. [ 8.319197] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.323652] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.329166] systemd[1]: Reached target User and Group Name Lookups. [ 8.334888] systemd[1]: Reached target Slices. [ 8.340342] systemd[1]: Reached target Swap. [ 8.346937] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.351853] systemd[1]: Listening on Syslog Socket. [ 8.355300] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.358572] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.362687] systemd[1]: Listening on Journal Audit Socket. [ 8.366166] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.369840] systemd[1]: Listening on Journal Socket. [ 8.373430] systemd[1]: Listening on udev Control Socket. [ 8.376819] systemd[1]: Listening on udev Kernel Socket. [ 8.384941] systemd[1]: Mounting Huge Pages File System... [ 8.393263] systemd[1]: Mounting POSIX Message Queue File System... [ 8.400960] systemd[1]: Mounting RPC Pipe File System... [ 8.409441] systemd[1]: Mounting Kernel Debug File System... [ 8.419393] systemd[1]: Mounting Kernel Trace File System... [ 8.430421] systemd[1]: Starting Journal Service... [ 8.439162] systemd[1]: Starting Set the console keyboard layout... [ 8.447607] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.451074] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.457827] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.465962] systemd[1]: Started Nameserver information manager. [ 8.470590] systemd[1]: Reached target Network (Pre). [ 8.477617] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.479428] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.487331] systemd[1]: Starting Load Kernel Modules... [ 8.495411] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.504602] systemd[1]: Starting udev Coldplug all Devices... [ 8.515102] systemd[1]: Mounted Huge Pages File System. [ 8.518864] systemd[1]: Mounted POSIX Message Queue File System. [ 8.522385] systemd[1]: Mounted RPC Pipe File System. [ 8.524646] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.529787] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.530611] systemd[1]: Mounted Kernel Debug File System. [ 8.531754] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.534181] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.534196] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.534200] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.534456] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.535837] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.541529] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.541541] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.546418] systemd[1]: Mounted Kernel Trace File System. [ 8.552719] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.557448] systemd[1]: nvfb-udev.service: Succeeded. [ 8.561501] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.571677] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.576762] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.578713] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.593750] systemd[1]: Starting Load/Save Random Seed... [ 8.601542] systemd[1]: Starting Create System Users... [ 8.647632] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.647632] [ 8.660880] systemd[1]: Finished Create System Users. [ 8.667708] systemd[1]: Finished Load/Save Random Seed. [ 8.673933] systemd[1]: Finished Load Kernel Modules. [ 8.678277] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.684435] systemd[1]: Mounting Kernel Configuration File System... [ 8.693289] systemd[1]: Started OP-TEE Client Supplicant. [ 8.701657] systemd[1]: Starting Apply Kernel Variables... [ 8.709948] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.721239] systemd[1]: Finished Set the console keyboard layout. [ 8.725290] systemd[1]: Mounted Kernel Configuration File System. [ 10.259364] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.266702] imx219 9-0010: board setup failed [ 10.268085] imx219: probe of 9-0010 failed with error -121 [ 10.282096] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.289384] imx219 10-0010: board setup failed [ 10.290658] imx219: probe of 10-0010 failed with error -121 [ 10.351633] hot-surface-alert cooling state: 0 -> 1 [ 11.368871] using random self ethernet address [ 11.392187] using random host ethernet address [ 11.742602] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.742608] Creating 1 MTD partitions on "spi6.0": [ 11.742617] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.595941] using random self ethernet address [ 12.597476] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.814857] nvidia: loading out-of-tree module taints kernel. [ 59.802936] watchdog: watchdog0: watchdog did not stop! [ 60.254041] Trying to unregister non-registered hwtime source [ 63.313440] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.314950] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized noc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 aÿâavfs_clk_platform_post initialized ÿäarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.645] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.647] I> width = 720, height = 480, frequency = 26973026 [0003.651] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.745] calling apps_init() [0003.746] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000707] Console: colour dummy device 80x25 [ 0.002105] printk: console [tty0] enabled [ 0.002164] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002199] pid_max: default: 32768 minimum: 301 [ 0.002438] LSM: Security Framework initializing [ 0.002499] Yama: becoming mindful. [ 0.002543] SELinux: Initializing. [ 0.002687] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002731] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005802] rcu: Hierarchical SRCU implementation. [ 0.006069] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006776] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006846] DTB Build time: Aug 10 2022 20:31:49 [ 0.009477] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009704] Remapping and enabling EFI services. [ 0.011790] smp: Bringing up secondary CPUs ... [ 0.041674] Detected PIPT I-cache on CPU1 [ 0.041749] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071266] Detected PIPT I-cache on CPU2 [ 0.071342] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100904] Detected PIPT I-cache on CPU3 [ 0.100996] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130728] Detected PIPT I-cache on CPU4 [ 0.130827] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160630] Detected PIPT I-cache on CPU5 [ 0.160770] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161125] smp: Brought up 1 node, 6 CPUs [ 0.161286] SMP: Total of 6 processors activated. [ 0.161341] CPU features: detected: Privileged Access Never [ 0.161365] CPU features: detected: LSE atomic instructions [ 0.161378] CPU features: detected: User Access Override [ 0.161392] CPU features: detected: 32-bit EL0 Support [ 0.161404] CPU features: detected: RAS Extension Support [ 0.161417] CPU features: detected: CRC32 instructions [ 0.161430] CPU features: detected: 32-bit EL1 Support [ 0.228974] CPU: All CPU(s) started at EL2 [ 0.235028] devtmpfs: initialized [ 0.305171] Registered cp15_barrier emulation handler [ 0.305288] Registered setend emulation handler [ 0.305323] KASLR enabled [ 0.305640] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.305689] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.307855] pinctrl core: initialized pinctrl subsystem [ 0.309007] SMBIOS 3.0.0 present. [ 0.309054] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.309789] NET: Registered protocol family 16 [ 0.312594] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.313338] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.314488] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.314630] audit: initializing netlink subsys (disabled) [ 0.314949] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1 [ 0.315478] thermal_sys: Registered thermal governor 'step_wise' [ 0.315487] thermal_sys: Registered thermal governor 'power_allocator' [ 0.315547] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.318615] cpuidle: using governor menu [ 0.319140] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.319644] ASID allocator initialised with 32768 entries [ 0.319928] Serial: AMBA PL011 UART driver [ 0.323126] Tegra reboot handler registered. [ 0.396905] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.397051] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.397274] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.397342] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.397469] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.397534] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.397643] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.397688] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.397794] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.397839] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.399932] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.399970] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.400014] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.400045] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.400097] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.400126] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.400166] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.400206] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.400240] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.400266] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.400292] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.400317] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.400343] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.400368] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.400393] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.400419] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.400444] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.400539] mc-err: mcerr ops are set to t19x [ 0.412182] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.412204] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.412216] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.412226] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.419332] ACPI: Interpreter disabled. [ 0.420465] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.421699] iommu: Default domain type: Translated [ 0.421771] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.422127] SCSI subsystem initialized [ 0.422271] usbcore: registered new interface driver usbfs [ 0.422314] usbcore: registered new interface driver hub [ 0.422345] usbcore: registered new device driver usb [ 0.422741] mc: Linux media interface: v0.10 [ 0.422771] videodev: Linux video capture interface: v2.00 [ 0.423085] pps_core: LinuxPPS API ver. 1 registered [ 0.423097] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.423116] PTP clock support registered [ 0.423316] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.423717] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.423826] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.424423] Registered efivars operations [ 0.429832] FPGA manager framework [ 0.429944] Advanced Linux Sound Architecture Driver Initialized. [ 0.430503] Bluetooth: Core ver 2.22 [ 0.430540] NET: Registered protocol family 31 [ 0.430552] Bluetooth: HCI device and connection manager initialized [ 0.430567] Bluetooth: HCI socket layer initialized [ 0.430579] Bluetooth: L2CAP socket layer initialized [ 0.430613] Bluetooth: SCO socket layer initialized [ 0.432096] camchar: rtcpu character device driver loaded [ 0.432772] clocksource: Switched to clocksource arch_sys_counter [ 0.719046] VFS: Disk quotas dquot_6.6.0 [ 0.719142] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.719468] pnp: PnP ACPI: disabled [ 0.729710] la/ptsa driver initialized. [ 0.729826] NET: Registered protocol family 2 [ 0.730007] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.734566] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.734635] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.734939] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.735377] TCP: Hash tables configured (established 65536 bind 65536) [ 0.735555] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.735647] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.735844] NET: Registered protocol family 1 [ 0.736679] RPC: Registered named UNIX socket transport module. [ 0.736709] RPC: Registered udp transport module. [ 0.736722] RPC: Registered tcp transport module. [ 0.736758] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.736844] PCI: CLS 0 bytes, default 64 [ 0.737140] Trying to unpack rootfs image as initramfs... [ 1.003695] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.007072] Freeing initrd memory: 8196K [ 1.011929] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.011966] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.012003] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.012406] kvm [1]: IPA Size Limit: 40 bits [ 1.013059] kvm [1]: vgic interrupt IRQ9 [ 1.013692] kvm [1]: VHE mode initialized successfully [ 1.015538] Initialise system trusted keyrings [ 1.015938] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.023098] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.023998] NFS: Registering the id_resolver key type [ 1.024030] Key type id_resolver registered [ 1.024043] Key type id_legacy registered [ 1.024157] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.024180] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.024237] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.036848] NET: Registered protocol family 38 [ 1.036898] Key type asymmetric registered [ 1.036913] Asymmetric key parser 'x509' registered [ 1.036960] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.037290] io scheduler mq-deadline registered [ 1.037309] io scheduler kyber registered [ 1.043704] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.046845] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.046946] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.047041] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.047111] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.047179] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.053086] scrncapt: init (heads:4 wins:6 planes:4) [ 1.053239] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.054330] EINJ: ACPI disabled. [ 1.058245] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.058273] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.058300] tegra-pmc: ### PMC reset level: L1 [ 1.058343] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.058397] tegra-pmc: PMC Prod config success [ 1.064728] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.096123] random: fast init done [ 1.104591] printk: console [ttyTCU0] enabled [ 2.623004] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.627073] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.631671] arm-smmu 10000000.iommu: stage 1 translation [ 2.637559] arm-smmu 10000000.iommu: stage 2 translation [ 2.642620] arm-smmu 10000000.iommu: nested translation [ 2.648213] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.655388] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.667097] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.668230] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.675107] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.682862] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.687863] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.692837] arm-smmu 12000000.iommu: stage 1 translation [ 2.698089] arm-smmu 12000000.iommu: stage 2 translation [ 2.703770] arm-smmu 12000000.iommu: nested translation [ 2.709230] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.716406] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.728242] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.729500] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.735800] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.743324] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.753672] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.756521] tegra_profiler: auth: init [ 2.760546] THERMAL EST: found 3 subdevs [ 2.764168] THERMAL EST num_resources: 0 [ 2.767746] [THERMAL EST subdev 0] [ 2.771068] [THERMAL EST subdev 1] [ 2.774477] [THERMAL EST subdev 2] [ 2.777996] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.784517] THERMAL EST: thz register success. [ 2.788422] THERMAL EST: end of probe, return err: 0 [ 2.794123] nvsciipc: loaded module [ 2.801485] tun: Universal TUN/TAP device driver, 1.6 [ 2.803265] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.809521] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.815345] e1000e: Intel(R) PRO/1000 Network Driver [ 2.819990] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.826341] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.831612] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.837524] PPP generic driver version 2.4.2 [ 2.841836] PPP BSD Compression module registered [ 2.846337] PPP Deflate Compression module registered [ 2.851613] PPP MPPE Compression module registered [ 2.856882] usbcore: registered new interface driver r8152 [ 2.862121] usbcore: registered new interface driver asix [ 2.867690] usbcore: registered new interface driver ax88179_178a [ 2.873563] usbcore: registered new interface driver cdc_ether [ 2.879763] usbcore: registered new interface driver net1080 [ 2.885363] usbcore: registered new interface driver cdc_subset [ 2.891150] usbcore: registered new interface driver zaurus [ 2.896851] usbcore: registered new interface driver cdc_ncm [ 2.902519] usbcore: registered new interface driver aqc111 [ 2.908176] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.914521] ohci-pci: OHCI PCI platform driver [ 2.918792] ohci-platform: OHCI generic platform driver [ 2.924520] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.931168] usbcore: registered new interface driver uas [ 2.934862] usbcore: registered new interface driver usb-storage [ 2.941095] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.947092] mousedev: PS/2 mouse device common for all mice [ 2.951988] usbcore: registered new interface driver xpad [ 2.960490] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.962763] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.970582] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.977329] i2c /dev entries driver [ 2.980388] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.986594] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.991568] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.997048] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.002267] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.007786] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.013282] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.028413] device-mapper: uevent: version 1.0.3 [ 3.029043] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.033708] cpuidle: Initializing cpuidle driver [ 3.038170] sdhci: Secure Digital Host Controller Interface driver [ 3.042339] sdhci: Copyright(c) Pierre Ossman [ 3.046440] Synopsys Designware Multimedia Card Interface Driver [ 3.052969] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.058712] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.059596] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.072242] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.096743] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.106765] vdd-1v0: supplied by regulator-dummy [ 3.112321] vdd-1v8-hs: supplied by regulator-dummy [ 3.117259] vdd-1v8-ls: supplied by regulator-dummy [ 3.122101] vdd-1v8-ao: supplied by regulator-dummy [ 3.126195] vddio-ddr-1v1: supplied by regulator-dummy [ 3.130767] vdd-rtc: supplied by regulator-dummy [ 3.132644] spmic-ldo1: supplied by regulator-dummy [ 3.133965] vdd-ao-3v3: supplied by regulator-dummy [ 3.140264] vddio-emmc-3v3: supplied by regulator-dummy [ 3.146656] spmic-ldo4: supplied by regulator-dummy [ 3.147922] vdd-usb-3v3: supplied by regulator-dummy [ 3.154163] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.160504] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.166134] spmic-ldo8: supplied by vdd-1v8-ls [ 3.167735] gpio-510 (gpio_default): hogged as output/high [ 3.169144] gpio-511 (gpio_default): hogged as output/high [ 3.172187] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.308447] max77686-rtc max77620-rtc: registered as rtc0 [ 3.309519] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.309898] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.172554] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.173886] hid: raw HID events driver (C) Jiri Kosina [ 4.174895] usbcore: registered new interface driver usbhid [ 4.175058] usbhid: USB HID core driver [ 4.177645] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.179219] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.248379] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.321634] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 74.065 ms) ÿá[ 4.262847] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.263480] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.264697] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.265632] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.267390] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.268148] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.268950] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.270698] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.271000] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.273672] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.279589] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.285773] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.291334] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.298219] denver_knobs_init:MTS_VERSION:55637613 [ 4.311588] t19x_cache tegra-cache: probed [ 4.318376] optee: probing for conduit method. [ 4.319311] optee: revision 3.16 (65cc2218) [ 4.321108] optee: dynamic shared memory is enabled [ 4.322537] optee: initialized driver [ 4.327521] nvpmodel: initialized successfully [ 4.328240] tegra_hv: get_hvd: not initialized yet [ 4.329924] user_ivc_mempool: hypervisor not present [ 4.336374] usbcore: registered new interface driver snd-usb-audio [ 4.342875] u32 classifier [ 4.343788] input device check on [ 4.347701] Actions configured [ 4.350970] Initializing XFRM netlink socket [ 4.356048] NET: Registered protocol family 10 [ 4.362946] Segment Routing with IPv6 [ 4.363187] NET: Registered protocol family 17 [ 4.367458] NET: Registered protocol family 15 [ 4.372205] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.385406] Bluetooth: RFCOMM socket layer initialized [ 4.390105] Bluetooth: RFCOMM ver 1.11 [ 4.394253] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.399839] Bluetooth: HIDP socket layer initialized [ 4.406147] 9pnet: Installing 9P2000 support [ 4.409548] Key type dns_resolver registered [ 4.415275] registered taskstats version 1 [ 4.417983] Loading compiled-in X.509 certificates [ 4.431421] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.433821] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.444382] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.445702] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.454211] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.462853] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.576866] tegra194-pcie 14160000.pcie: Link up [ 4.579812] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.580109] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.580292] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.580556] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.580826] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.581312] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.581753] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.598779] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.599322] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.599878] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.601586] pci 0004:01:00.0: supports D1 D2 [ 4.601819] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.613905] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.614289] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.614515] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.615009] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.615262] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.615450] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.615661] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.618978] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.627463] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.638307] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.642288] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.648583] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.655609] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.665953] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.666403] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.673882] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.682524] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.788896] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.789555] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.789823] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.790001] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.790332] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.790664] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.791109] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.791652] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.814564] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.814865] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.817396] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.818922] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.821030] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.823069] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.824175] pci 0005:00:00.0: Removing from iommu group 7 [ 5.824549] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.860146] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.887264] host1x 13e10000.host1x: initialized [ 5.889383] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.890453] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.891455] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.892147] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.893486] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.894270] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.895252] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.895893] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.897212] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.897839] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.899105] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.905875] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.915816] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.922997] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.932687] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.939872] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.949638] falcon 15340000.vic: Adding to iommu group 17 [ 5.965143] falcon 15340000.vic: initialized [ 5.966347] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.971796] falcon 15380000.nvjpg: initialized [ 5.972395] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.983906] falcon 154c0000.nvenc: initialized [ 5.984572] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.992748] falcon 15a80000.nvenc1: initialized [ 5.993463] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.005551] nvdec 15480000.nvdec: initialized [ 6.006146] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.015711] nvdec 15140000.nvdec1: initialized [ 6.016270] tsec 15500000.tsec: Adding to iommu group 18 [ 6.021900] tsec 15500000.tsec: initialized [ 6.022526] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.031305] tsec 15100000.tsecb: initialized [ 6.035349] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.062590] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.077611] gpio-374 (wifi-enable): hogged as output/high [ 6.077900] gpio-431 (camera-control-output-low): hogged as output/low [ 6.078220] gpio-432 (camera-control-output-low): hogged as output/low [ 6.079902] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.082214] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.082817] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.084417] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.086710] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.092703] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.098002] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.106303] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.113688] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.125500] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.129991] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.135971] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.144826] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.154345] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.161364] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.168896] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.175139] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.184643] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.191123] pva 16000000.pva0: Adding to iommu group 22 [ 6.218122] pva 16000000.pva0: initialized [ 6.223178] pva 16800000.pva1: Adding to iommu group 23 [ 6.235336] pva 16800000.pva1: initialized [ 6.239884] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.253621] nvdla 15880000.nvdla0: initialized [ 6.255184] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.263597] nvdla 158c0000.nvdla1: initialized [ 6.267434] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.267781] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.268477] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.268709] tegradc 15200000.display: Adding to iommu group 26 [ 6.269084] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.269092] tegradc 15210000.display: Adding to iommu group 26 [ 6.269248] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.270690] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.274629] tegradccommon 15200000.display-hub: dma mapping done [ 6.280326] tegra_cec 3960000.tegra_cec: probed [ 6.291938] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.297061] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.305149] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.310021] kfuse 3830000.kfuse: initialized [ 6.314613] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.320347] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.327125] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.333805] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.342700] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.347840] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.357304] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.362585] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.384006] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.384402] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.386151] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.394116] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.402998] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.409347] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.417174] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.424290] usb usb1: Product: xHCI Host Controller [ 6.429275] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.435608] usb usb1: SerialNumber: 3610000.xhci [ 6.441362] hub 1-0:1.0: USB hub found [ 6.443869] hub 1-0:1.0: 4 ports detected [ 6.448672] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.453294] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.461187] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.469021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.476708] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.483713] usb usb2: Product: xHCI Host Controller [ 6.488723] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.494908] usb usb2: SerialNumber: 3610000.xhci [ 6.500315] hub 2-0:1.0: USB hub found [ 6.503713] hub 2-0:1.0: 4 ports detected [ 6.550144] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.557714] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.559261] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.559532] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.573529] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.574732] tegra194-cpufreq ccplex: probed with BWMGR [ 6.575874] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.576311] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.576937] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.578123] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.583618] tegra194-vi5 15c10000.vi: initialized [ 6.585371] tegradc 15210000.display: disp0 connected to head1->sor [ 6.585662] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.586280] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.587737] mmc0: CQHCI version 5.10 [ 6.590633] tegradc 15210000.display: DT parsed successfully [ 6.597228] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.600490] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.600740] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.606171] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.614497] generic_infoframe_type: 0x87 [ 6.616712] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.621953] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.628723] tegradc 15200000.display: DT parsed successfully [ 6.634839] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.639039] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.646873] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.653050] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.654633] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.659232] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.665860] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.665868] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.673831] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.680803] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.688020] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.694663] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.695168] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.702693] mmc0: Command Queue Engine enabled [ 6.702699] mmc0: periodic cache flush enabled [ 6.702715] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.703247] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.703418] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.704833] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.707195] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.711463] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.725100] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.727311] tegradc 15200000.display: probed [ 6.731048] nvethernet 2490000.ethernet: Macsec not supported [ 6.732389] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.831214] Console: switching to colour frame buffer device 240x67 [ 6.832048] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.836908] tegradc 15200000.display: fb registered [ 6.842682] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.855266] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.855344] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.861581] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.868401] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.872636] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.872643] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.872647] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.872655] usb 1-2: Manufacturer: Generic [ 6.873659] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.874807] hub 1-2:1.0: USB hub found [ 6.875818] hub 1-2:1.0: 4 ports detected [ 6.881319] tegra-se-nvhost 15810000.se: initialized [ 6.924292] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.929587] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.936181] tegra-se-nvhost 15820000.se: initialized [ 6.942281] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.946279] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.946831] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.956170] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.961842] tegra-se-nvhost 15830000.se: initialized [ 6.969003] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.975010] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.982602] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.988241] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.989792] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.994868] Extcon AUX1(HDMI) enable [ 6.995020] tegradc 15210000.display: disp1 connected to head1->sor [ 7.002003] tegra-se-nvhost 15840000.se: initialized [ 7.008910] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.013903] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.018795] tegradc 15210000.display: DT parsed successfully [ 7.025257] tegra_actmon d230000.actmon: in actmon_register()... [ 7.030560] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.042807] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.048683] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 7.056812] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.061852] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 7.065258] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.065265] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.065287] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.065293] usb 2-3: Manufacturer: Generic [ 7.068564] hvc_sysfs: hypervisor is not present [ 7.076173] hub 2-3:1.0: USB hub found [ 7.082836] tegradc 15210000.display: probed [ 7.092639] hub 2-3:1.0: 4 ports detected [ 7.098990] random: crng init done [ 7.127322] tegradc 15210000.display: fb registered [ 7.136640] ALSA device list: [ 7.136749] No soundcards found. [ 7.140573] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.146171] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.146632] Freeing unused kernel memory: 3968K [ 7.153687] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.164041] tegradc 15210000.display: blank - powerdown [ 7.168909] Run /init as init process [ 7.168998] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.180883] Extcon DP: HPD disabled [ 7.180908] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.180919] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.184827] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.190608] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.210656] tegradc 15200000.display: blank - powerdown [ 7.246728] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.246733] Extcon AUX1(HDMI) disable [ 7.270204] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.271076] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.284081] tegradc 15200000.display: unblank [ 7.285409] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.285603] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.291376] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.293303] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.297456] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.297460] Extcon AUX1(HDMI) enable [ 7.310085] tegradc 15200000.display: sync windows ret = 247 [ 7.333982] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.334250] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.335849] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.338959] usb 1-3: Product: Bluetooth Radio [ 7.338963] usb 1-3: Manufacturer: Realtek [ 7.338968] usb 1-3: SerialNumber: 00e04c000001 [ 7.343300] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.344738] Extcon HDMI: HPD enabled [ 7.346119] tegradc 15200000.display: hdmi: plugged [ 7.395283] Root device found: mmcblk0p1 [ 7.398797] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.398809] Found dev node: /dev/mmcblk0p1 [ 7.400316] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.437530] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.442922] Rootfs mounted over mmcblk0p1 [ 7.478507] Switching from initrd to actual rootfs [ 7.637880] systemd[1]: System time before build time, advancing clock. [ 7.709056] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.714077] systemd[1]: Detected architecture arm64. [ 7.759487] systemd[1]: Set hostname to . [ 7.930249] systemd-sysv-generator[245]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.282822] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.284616] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.290441] systemd[1]: Created slice system-modprobe.slice. [ 8.295368] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.299756] systemd[1]: Created slice User and Session Slice. [ 8.303393] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.307875] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.311413] systemd[1]: Reached target User and Group Name Lookups. [ 8.314842] systemd[1]: Reached target Slices. [ 8.318122] systemd[1]: Reached target Swap. [ 8.322273] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.326111] systemd[1]: Listening on Syslog Socket. [ 8.329858] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.333436] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.337867] systemd[1]: Listening on Journal Audit Socket. [ 8.341618] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.345553] systemd[1]: Listening on Journal Socket. [ 8.349416] systemd[1]: Listening on udev Control Socket. [ 8.353191] systemd[1]: Listening on udev Kernel Socket. [ 8.363256] systemd[1]: Mounting Huge Pages File System... [ 8.372872] systemd[1]: Mounting POSIX Message Queue File System... [ 8.380934] systemd[1]: Mounting RPC Pipe File System... [ 8.389540] systemd[1]: Mounting Kernel Debug File System... [ 8.398247] systemd[1]: Mounting Kernel Trace File System... [ 8.408183] systemd[1]: Starting Journal Service... [ 8.417166] systemd[1]: Starting Set the console keyboard layout... [ 8.425442] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.428964] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.435276] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.444325] systemd[1]: Started Nameserver information manager. [ 8.449502] systemd[1]: Reached target Network (Pre). [ 8.456656] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.459577] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.468214] systemd[1]: Starting Load Kernel Modules... [ 8.475871] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.483546] systemd[1]: Starting udev Coldplug all Devices... [ 8.494014] systemd[1]: Mounted Huge Pages File System. [ 8.497940] systemd[1]: Mounted POSIX Message Queue File System. [ 8.501380] systemd[1]: Mounted RPC Pipe File System. [ 8.504852] systemd[1]: Mounted Kernel Debug File System. [ 8.506517] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.514693] systemd[1]: Mounted Kernel Trace File System. [ 8.520942] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.523888] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.525649] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.525655] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.525664] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.525667] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.527978] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.529438] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.535258] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.536711] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.537085] systemd[1]: nvfb-udev.service: Succeeded. [ 8.542064] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.553642] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.562618] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.564353] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.575481] systemd[1]: Starting Load/Save Random Seed... [ 8.584123] systemd[1]: Starting Create System Users... [ 8.628989] systemd[1]: Finished Load/Save Random Seed. [ 8.643500] systemd[1]: Finished Create System Users. [ 8.648330] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.648330] [ 8.651953] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.672796] systemd[1]: Finished Set the console keyboard layout. [ 8.683851] systemd[1]: Finished Load Kernel Modules. [ 8.688546] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.695483] systemd[1]: Mounting Kernel Configuration File System... [ 8.703731] systemd[1]: Started OP-TEE Client Supplicant. [ 8.712582] systemd[1]: Starting Apply Kernel Variables... [ 8.725537] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.730303] systemd[1]: Mounted Kernel Configuration File System. [ 8.733954] systemd[1]: Reached target Local File Systems (Pre). [ 8.737123] systemd[1]: Reached target Local File Systems. [ 8.740313] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 8.746674] systemd[1]: Starting Enable support for additional executable binary formats... [ 10.008634] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.017064] imx219 9-0010: board setup failed [ 10.018280] imx219: probe of 9-0010 failed with error -121 [ 10.030809] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.037252] imx219 10-0010: board setup failed [ 10.038553] imx219: probe of 10-0010 failed with error -121 [ 10.214320] hot-surface-alert cooling state: 0 -> 1 [ 10.562923] using random self ethernet address [ 10.564595] using random host ethernet address [ 11.947563] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.949384] Creating 1 MTD partitions on "spi6.0": [ 11.958250] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.302700] using random self ethernet address [ 12.304309] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.794671] nvidia: loading out-of-tree module taints kernel. [ 59.414570] watchdog: watchdog0: watchdog did not stop! [ 59.906186] Trying to unregister non-registered hwtime source [ 62.967890] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.969441] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [Eÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.205] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.206] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.213] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.222] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.262] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.271] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.280] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.320] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.329] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.338] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.378] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.387] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.396] GIC-SPI Target CPU: 0 [0003.399] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.429] initializing platform [0003.432] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.480] I> register 'maxim' power off handle [0003.482] I> virtual i2c enabled [0003.482] I> registered 'maxim,max20024' pmic [0003.483] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.486] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.493] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.519] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.530] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.538] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.589] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.631] I> edid read success [0003.644] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.644] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.683] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.743] initializing target [0003.744] calling apps_init() [0003.744] starting app kernel_boot_app [0003.745] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000826] Console: colour dummy device 80x25 [ 0.002305] printk: console [tty0] enabled [ 0.002380] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002419] pid_max: default: 32768 minimum: 301 [ 0.002678] LSM: Security Framework initializing [ 0.002737] Yama: becoming mindful. [ 0.002785] SELinux: Initializing. [ 0.002937] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002974] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006108] rcu: Hierarchical SRCU implementation. [ 0.006355] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007016] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007118] DTB Build time: Aug 10 2022 20:31:49 [ 0.009790] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010045] Remapping and enabling EFI services. [ 0.012108] smp: Bringing up secondary CPUs ... [ 0.041311] Detected PIPT I-cache on CPU1 [ 0.041392] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070944] Detected PIPT I-cache on CPU2 [ 0.071092] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100693] Detected PIPT I-cache on CPU3 [ 0.100837] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130483] Detected PIPT I-cache on CPU4 [ 0.130585] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160273] Detected PIPT I-cache on CPU5 [ 0.160452] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160781] smp: Brought up 1 node, 6 CPUs [ 0.161123] SMP: Total of 6 processors activated. [ 0.161168] CPU features: detected: Privileged Access Never [ 0.161199] CPU features: detected: LSE atomic instructions [ 0.161222] CPU features: detected: User Access Override [ 0.161244] CPU features: detected: 32-bit EL0 Support [ 0.161267] CPU features: detected: RAS Extension Support [ 0.161289] CPU features: detected: CRC32 instructions [ 0.161311] CPU features: detected: 32-bit EL1 Support [ 0.229946] CPU: All CPU(s) started at EL2 [ 0.237191] devtmpfs: initialized [ 0.287668] Registered cp15_barrier emulation handler [ 0.287773] Registered setend emulation handler [ 0.287800] KASLR enabled [ 0.288052] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288117] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290448] pinctrl core: initialized pinctrl subsystem [ 0.291475] SMBIOS 3.0.0 present. [ 0.291511] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292179] NET: Registered protocol family 16 [ 0.294129] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.294663] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295383] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295462] audit: initializing netlink subsys (disabled) [ 0.295692] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296144] thermal_sys: Registered thermal governor 'step_wise' [ 0.296150] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296174] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298331] cpuidle: using governor menu [ 0.298675] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299131] ASID allocator initialised with 32768 entries [ 0.299353] Serial: AMBA PL011 UART driver [ 0.302599] Tegra reboot handler registered. [ 0.377931] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.378101] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.378291] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.378347] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.378480] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.378531] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.378725] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.378776] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.378902] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.378951] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.381347] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.381391] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.381427] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.381462] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.381500] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.381534] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.381568] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.381603] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.381658] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.381709] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.381755] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.381836] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.381872] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.381906] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.381940] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.381974] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.382008] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.382104] mc-err: mcerr ops are set to t19x [ 0.395387] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.395422] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.395448] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.395471] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.404000] ACPI: Interpreter disabled. [ 0.405876] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.407739] iommu: Default domain type: Translated [ 0.407840] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.408463] SCSI subsystem initialized [ 0.408698] usbcore: registered new interface driver usbfs [ 0.408794] usbcore: registered new interface driver hub [ 0.408855] usbcore: registered new device driver usb [ 0.409486] mc: Linux media interface: v0.10 [ 0.409568] videodev: Linux video capture interface: v2.00 [ 0.410006] pps_core: LinuxPPS API ver. 1 registered [ 0.410024] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.410083] PTP clock support registered [ 0.410423] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.410758] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.410856] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.411697] Registered efivars operations [ 0.420329] FPGA manager framework [ 0.420516] Advanced Linux Sound Architecture Driver Initialized. [ 0.421351] Bluetooth: Core ver 2.22 [ 0.421407] NET: Registered protocol family 31 [ 0.421452] Bluetooth: HCI device and connection manager initialized [ 0.421480] Bluetooth: HCI socket layer initialized [ 0.421525] Bluetooth: L2CAP socket layer initialized [ 0.421558] Bluetooth: SCO socket layer initialized [ 0.423676] camchar: rtcpu character device driver loaded [ 0.424711] clocksource: Switched to clocksource arch_sys_counter [ 0.841712] VFS: Disk quotas dquot_6.6.0 [ 0.841829] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.842280] pnp: PnP ACPI: disabled [ 0.856524] la/ptsa driver initialized. [ 0.856739] NET: Registered protocol family 2 [ 0.856973] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.864531] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.864776] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.865152] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.865774] TCP: Hash tables configured (established 65536 bind 65536) [ 0.866011] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.866154] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.866456] NET: Registered protocol family 1 [ 0.867475] RPC: Registered named UNIX socket transport module. [ 0.867505] RPC: Registered udp transport module. [ 0.867521] RPC: Registered tcp transport module. [ 0.867537] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.867591] PCI: CLS 0 bytes, default 64 [ 0.867855] Trying to unpack rootfs image as initramfs... [ 1.130258] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.133448] Freeing initrd memory: 8196K [ 1.137545] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.137586] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.137627] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.137924] kvm [1]: IPA Size Limit: 40 bits [ 1.138373] kvm [1]: vgic interrupt IRQ9 [ 1.138887] kvm [1]: VHE mode initialized successfully [ 1.140525] Initialise system trusted keyrings [ 1.140887] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.147280] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.148134] NFS: Registering the id_resolver key type [ 1.148167] Key type id_resolver registered [ 1.148183] Key type id_legacy registered [ 1.148266] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.148293] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.148335] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.157890] NET: Registered protocol family 38 [ 1.157915] Key type asymmetric registered [ 1.157932] Asymmetric key parser 'x509' registered [ 1.158017] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.158341] io scheduler mq-deadline registered [ 1.158373] io scheduler kyber registered [ 1.164113] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.167194] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.167308] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.167414] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.167492] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.167565] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.172805] scrncapt: init (heads:4 wins:6 planes:4) [ 1.173027] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.173907] EINJ: ACPI disabled. [ 1.177210] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.177235] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.177249] tegra-pmc: ### PMC reset level: L1 [ 1.177263] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.177340] tegra-pmc: PMC Prod config success [ 1.182662] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.188066] random: fast init done [ 1.188727] printk: console [ttyTCU0] enabled [ 2.740381] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.744620] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.749242] arm-smmu 10000000.iommu: stage 1 translation [ 2.754755] arm-smmu 10000000.iommu: stage 2 translation [ 2.760192] arm-smmu 10000000.iommu: nested translation [ 2.765786] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.772724] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.783883] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.785818] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.792369] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.800471] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.805412] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.810147] arm-smmu 12000000.iommu: stage 1 translation [ 2.815901] arm-smmu 12000000.iommu: stage 2 translation [ 2.821075] arm-smmu 12000000.iommu: nested translation [ 2.826500] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.833687] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.844380] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.847064] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.853358] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.861191] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.871124] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.874073] tegra_profiler: auth: init [ 2.878025] THERMAL EST: found 3 subdevs [ 2.881712] THERMAL EST num_resources: 0 [ 2.885295] [THERMAL EST subdev 0] [ 2.888879] [THERMAL EST subdev 1] [ 2.892011] [THERMAL EST subdev 2] [ 2.895538] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.902007] THERMAL EST: thz register success. [ 2.905987] THERMAL EST: end of probe, return err: 0 [ 2.911526] nvsciipc: loaded module [ 2.918578] tun: Universal TUN/TAP device driver, 1.6 [ 2.920804] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.927033] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.932599] e1000e: Intel(R) PRO/1000 Network Driver [ 2.937799] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.943621] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.949165] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.955291] PPP generic driver version 2.4.2 [ 2.959592] PPP BSD Compression module registered [ 2.964143] PPP Deflate Compression module registered [ 2.969132] PPP MPPE Compression module registered [ 2.974142] usbcore: registered new interface driver r8152 [ 2.979937] usbcore: registered new interface driver asix [ 2.985247] usbcore: registered new interface driver ax88179_178a [ 2.991110] usbcore: registered new interface driver cdc_ether [ 2.997332] usbcore: registered new interface driver net1080 [ 3.002660] usbcore: registered new interface driver cdc_subset [ 3.008779] usbcore: registered new interface driver zaurus [ 3.014433] usbcore: registered new interface driver cdc_ncm [ 3.020070] usbcore: registered new interface driver aqc111 [ 3.025701] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.032053] ohci-pci: OHCI PCI platform driver [ 3.036346] ohci-platform: OHCI generic platform driver [ 3.042155] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.048272] usbcore: registered new interface driver uas [ 3.052393] usbcore: registered new interface driver usb-storage [ 3.058535] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.064524] mousedev: PS/2 mouse device common for all mice [ 3.069790] usbcore: registered new interface driver xpad [ 3.077473] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.080253] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.088083] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.094664] i2c /dev entries driver [ 3.097961] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.103965] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.109255] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.114777] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.119797] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.125560] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.130775] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.144833] device-mapper: uevent: version 1.0.3 [ 3.145295] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.151424] cpuidle: Initializing cpuidle driver [ 3.155306] sdhci: Secure Digital Host Controller Interface driver [ 3.159882] sdhci: Copyright(c) Pierre Ossman [ 3.163981] Synopsys Designware Multimedia Card Interface Driver [ 3.170164] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.176095] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.176954] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.189450] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.211496] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.221237] vdd-1v0: supplied by regulator-dummy [ 3.226769] vdd-1v8-hs: supplied by regulator-dummy [ 3.231664] vdd-1v8-ls: supplied by regulator-dummy [ 3.236532] vdd-1v8-ao: supplied by regulator-dummy [ 3.240492] vddio-ddr-1v1: supplied by regulator-dummy [ 3.245086] vdd-rtc: supplied by regulator-dummy [ 3.246872] spmic-ldo1: supplied by regulator-dummy [ 3.248144] vdd-ao-3v3: supplied by regulator-dummy [ 3.254566] vddio-emmc-3v3: supplied by regulator-dummy [ 3.260964] spmic-ldo4: supplied by regulator-dummy [ 3.262208] vdd-usb-3v3: supplied by regulator-dummy [ 3.268456] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.274679] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.280259] spmic-ldo8: supplied by vdd-1v8-ls [ 3.281772] gpio-510 (gpio_default): hogged as output/high [ 3.283120] gpio-511 (gpio_default): hogged as output/high [ 3.286072] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.422234] max77686-rtc max77620-rtc: registered as rtc0 [ 3.423537] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.423867] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.248387] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.249721] hid: raw HID events driver (C) Jiri Kosina [ 4.250580] usbcore: registered new interface driver usbhid [ 4.250729] usbhid: USB HID core driver [ 4.252757] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.253895] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.236971] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.311642] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 75.478 ms) ÿá[ 4.338497] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.339150] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.340322] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.341164] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.342837] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.343533] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.344006] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.345457] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.345681] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.347572] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.354567] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.361195] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.366446] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.371854] denver_knobs_init:MTS_VERSION:55637613 [ 4.386444] t19x_cache tegra-cache: probed [ 4.389193] optee: probing for conduit method. [ 4.390002] optee: revision 3.16 (65cc2218) [ 4.391066] optee: dynamic shared memory is enabled [ 4.393449] optee: initialized driver [ 4.399321] nvpmodel: initialized successfully [ 4.400654] tegra_hv: get_hvd: not initialized yet [ 4.405486] user_ivc_mempool: hypervisor not present [ 4.411684] usbcore: registered new interface driver snd-usb-audio [ 4.417885] u32 classifier [ 4.419225] input device check on [ 4.422887] Actions configured [ 4.426795] Initializing XFRM netlink socket [ 4.431654] NET: Registered protocol family 10 [ 4.438283] Segment Routing with IPv6 [ 4.439052] NET: Registered protocol family 17 [ 4.443091] NET: Registered protocol family 15 [ 4.447764] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.461311] Bluetooth: RFCOMM socket layer initialized [ 4.465961] Bluetooth: RFCOMM ver 1.11 [ 4.469620] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.475736] Bluetooth: HIDP socket layer initialized [ 4.481274] 9pnet: Installing 9P2000 support [ 4.484956] Key type dns_resolver registered [ 4.490538] registered taskstats version 1 [ 4.493608] Loading compiled-in X.509 certificates [ 4.506676] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.509410] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.519358] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.521567] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.529937] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.538541] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.652828] tegra194-pcie 14160000.pcie: Link up [ 4.655911] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.656174] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.656391] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.656638] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.656927] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.657307] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.657794] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.670979] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.671571] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.672093] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.673848] pci 0004:01:00.0: supports D1 D2 [ 4.674026] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.685441] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.685799] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.686018] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.686428] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.686762] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.686921] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.687603] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.695122] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.703558] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.713992] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.718544] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.724312] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.731007] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.739543] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.741235] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.749954] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.758166] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.873565] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.874152] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.874320] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.874538] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.874944] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.875142] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.875526] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.875949] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.895949] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.896341] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.897995] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.899007] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.900826] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.902598] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.903689] pci 0005:00:00.0: Removing from iommu group 7 [ 5.904006] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.938969] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.963188] host1x 13e10000.host1x: initialized [ 5.965071] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.965993] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.967421] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.968228] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.969655] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.970412] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.971443] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.972068] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.973490] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.974085] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.983745] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.990487] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.000577] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.007619] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.017302] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.024670] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.034538] falcon 15340000.vic: Adding to iommu group 17 [ 6.049771] falcon 15340000.vic: initialized [ 6.050855] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.056463] falcon 15380000.nvjpg: initialized [ 6.057418] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.068057] falcon 154c0000.nvenc: initialized [ 6.068817] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.077949] falcon 15a80000.nvenc1: initialized [ 6.078710] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.091071] nvdec 15480000.nvdec: initialized [ 6.091812] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.102271] nvdec 15140000.nvdec1: initialized [ 6.102908] tsec 15500000.tsec: Adding to iommu group 18 [ 6.109036] tsec 15500000.tsec: initialized [ 6.109536] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.115365] tsec 15100000.tsecb: initialized [ 6.119336] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.146527] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.159220] gpio-374 (wifi-enable): hogged as output/high [ 6.159569] gpio-431 (camera-control-output-low): hogged as output/low [ 6.159845] gpio-432 (camera-control-output-low): hogged as output/low [ 6.161645] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.164031] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.164571] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.166198] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.171551] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.177334] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.182870] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.190934] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.198145] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.210229] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.214723] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.220544] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.229696] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.238848] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.246345] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.253543] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.259959] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.269316] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.275722] pva 16000000.pva0: Adding to iommu group 22 [ 6.302427] pva 16000000.pva0: initialized [ 6.306901] pva 16800000.pva1: Adding to iommu group 23 [ 6.319210] pva 16800000.pva1: initialized [ 6.323435] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.337074] nvdla 15880000.nvdla0: initialized [ 6.338321] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.354950] nvdla 158c0000.nvdla1: initialized [ 6.360281] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.360591] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.360619] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.361082] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.361723] tegradccommon 15200000.display-hub: dma mapping done [ 6.361783] tegradc 15210000.display: Adding to iommu group 26 [ 6.361913] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.361955] tegradc 15200000.display: Adding to iommu group 26 [ 6.361972] random: crng init done [ 6.362246] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.370996] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.374815] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.381383] generic_infoframe_type: 0x87 [ 6.386832] tegra_cec 3960000.tegra_cec: probed [ 6.387481] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.390668] tegradc 15200000.display: DT parsed successfully [ 6.397400] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.400990] tegradc 15200000.display: Display dc.000000007e53642d registered with id=0 [ 6.406860] kfuse 3830000.kfuse: initialized [ 6.418396] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.422225] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.425746] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.425771] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.433985] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.441583] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.449866] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.456768] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.458033] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.464498] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.472495] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.477216] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.482863] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.492882] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.504298] tegradc 15210000.display: disp0 connected to head1->sor [ 6.510140] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.514255] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.521764] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.529994] tegradc 15210000.display: DT parsed successfully [ 6.548488] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.549512] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.558412] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.558493] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.595042] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.603834] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.610629] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.618082] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.625238] usb usb1: Product: xHCI Host Controller [ 6.629952] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.636163] usb usb1: SerialNumber: 3610000.xhci [ 6.641841] hub 1-0:1.0: USB hub found [ 6.645026] hub 1-0:1.0: 4 ports detected [ 6.649689] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.654241] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.662102] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.669913] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.677674] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.684897] usb usb2: Product: xHCI Host Controller [ 6.689640] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.695837] usb usb2: SerialNumber: 3610000.xhci [ 6.701283] hub 2-0:1.0: USB hub found [ 6.704277] hub 2-0:1.0: 4 ports detected [ 6.746133] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.751949] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.753453] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.753688] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.767021] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.768095] tegra194-cpufreq ccplex: probed with BWMGR [ 6.769434] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.770001] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.770458] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.771616] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.778934] tegra194-vi5 15c10000.vi: initialized [ 6.780341] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.781499] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.784671] generic_infoframe_type: 0x87 [ 6.790989] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.794660] mmc0: CQHCI version 5.10 [ 6.796754] tegradc 15200000.display: DT parsed successfully [ 6.796815] tegradc 15200000.display: Display dc.0000000049c1cc1e registered with id=0 [ 6.797438] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.797445] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.797448] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.797776] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.797782] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.797929] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.799153] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.799158] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.801419] tegradc 15200000.display: probed [ 6.803016] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.803024] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.803029] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.803040] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.836268] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.844812] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.912737] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.913445] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.937695] mmc0: Command Queue Engine enabled [ 6.941197] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.945893] mmc0: periodic cache flush enabled [ 6.945910] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.953931] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.957839] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.971295] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.975566] nvethernet 2490000.ethernet: Macsec not supported [ 6.976949] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.994378] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.997835] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 7.010687] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.010847] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.010990] Console: switching to colour frame buffer device 240x67 [ 7.012120] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.017680] tegradc 15200000.display: fb registered [ 7.026618] tegra-se-nvhost 15810000.se: initialized [ 7.030774] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.041832] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.047294] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.052807] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.059000] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.065386] tegra-se-nvhost 15820000.se: initialized [ 7.083403] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.088594] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.094997] tegra-se-nvhost 15830000.se: initialized [ 7.100429] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.105736] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.112386] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.112399] tegra-se-nvhost 15840000.se: initialized [ 7.112424] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.121902] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.124791] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.130878] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.131957] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.133658] tegra_actmon d230000.actmon: in actmon_register()... [ 7.138059] usb 1-2: Manufacturer: Generic [ 7.138123] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.142865] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.159725] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.165494] hub 1-2:1.0: USB hub found [ 7.165962] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.165970] Extcon AUX1(HDMI) enable [ 7.166143] tegradc 15210000.display: disp1 connected to head1->sor [ 7.166270] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.166387] tegradc 15210000.display: DT parsed successfully [ 7.166426] tegradc 15210000.display: Display dc.0000000033f5657f registered with id=1 [ 7.166553] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.166563] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.170090] hvc_sysfs: hypervisor is not present [ 7.173034] tegradc 15210000.display: probed [ 7.176065] hub 1-2:1.0: 4 ports detected [ 7.209763] ALSA device list: [ 7.233581] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.238847] No soundcards found. [ 7.272239] tegradc 15210000.display: fb registered [ 7.275784] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.284536] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.284546] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.293165] Freeing unused kernel memory: 3968K [ 7.302178] tegradc 15210000.display: blank - powerdown ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.307233] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.307241] Extcon DP: HPD disabled [ 7.307250] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.307261] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.307271] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.307335] tegradc 15200000.display: blank - powerdown [ 7.308798] Run /init as init process [ 7.316722] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.316727] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.316731] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.316734] usb 2-3: Manufacturer: Generic [ 7.327222] hub 2-3:1.0: USB hub found [ 7.328970] hub 2-3:1.0: 4 ports detected [ 7.347878] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.347887] Extcon AUX1(HDMI) disable [ 7.371178] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.371998] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.384340] tegradc 15200000.display: unblank [ 7.385392] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.385585] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.391605] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.392761] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.392774] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.393478] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.397449] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.397459] Extcon AUX1(HDMI) enable [ 7.410273] tegradc 15200000.display: sync windows ret = 247 [ 7.424783] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.484266] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.491454] Extcon HDMI: HPD enabled [ 7.494871] tegradc 15200000.display: hdmi: plugged [ 7.535171] Root device found: mmcblk0p1 [ 7.538522] Found dev node: /dev/mmcblk0p1 [ 7.574642] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.580165] Rootfs mounted over mmcblk0p1 [ 7.624121] Switching from initrd to actual rootfs [ 7.638021] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.639481] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.640875] usb 1-3: Product: Bluetooth Radio [ 7.642155] usb 1-3: Manufacturer: Realtek [ 7.643440] usb 1-3: SerialNumber: 00e04c000001 [ 7.782451] systemd[1]: System time before build time, advancing clock. [ 7.850857] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.855702] systemd[1]: Detected architecture arm64. [ 7.889120] systemd[1]: Set hostname to . [ 8.053458] systemd-sysv-generator[249]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.398471] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.400164] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.405703] systemd[1]: Created slice system-modprobe.slice. [ 8.410215] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.414189] systemd[1]: Created slice User and Session Slice. [ 8.417633] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.421697] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.424909] systemd[1]: Reached target User and Group Name Lookups. [ 8.427945] systemd[1]: Reached target Slices. [ 8.430903] systemd[1]: Reached target Swap. [ 8.434666] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.438153] systemd[1]: Listening on Syslog Socket. [ 8.441609] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.444812] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.448898] systemd[1]: Listening on Journal Audit Socket. [ 8.452393] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.456067] systemd[1]: Listening on Journal Socket. [ 8.459736] systemd[1]: Listening on udev Control Socket. [ 8.463187] systemd[1]: Listening on udev Kernel Socket. [ 8.473239] systemd[1]: Mounting Huge Pages File System... [ 8.482843] systemd[1]: Mounting POSIX Message Queue File System... [ 8.490776] systemd[1]: Mounting RPC Pipe File System... [ 8.499338] systemd[1]: Mounting Kernel Debug File System... [ 8.507792] systemd[1]: Mounting Kernel Trace File System... [ 8.517957] systemd[1]: Starting Journal Service... [ 8.526654] systemd[1]: Starting Set the console keyboard layout... [ 8.534800] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.538308] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.544615] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.552469] systemd[1]: Started Nameserver information manager. [ 8.556976] systemd[1]: Reached target Network (Pre). [ 8.563986] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.565983] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.572850] systemd[1]: Starting Load Kernel Modules... [ 8.580489] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.588797] systemd[1]: Starting udev Coldplug all Devices... [ 8.600054] systemd[1]: Mounted Huge Pages File System. [ 8.603815] systemd[1]: Mounted POSIX Message Queue File System. [ 8.607416] systemd[1]: Mounted RPC Pipe File System. [ 8.609224] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.614746] systemd[1]: Mounted Kernel Debug File System. [ 8.618345] systemd[1]: Mounted Kernel Trace File System. [ 8.620292] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.621334] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.623948] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.623961] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.623965] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.624216] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.628865] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.631173] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.633465] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.634612] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.653348] systemd[1]: nvfb-udev.service: Succeeded. [ 8.657181] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.669166] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.675089] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.677111] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.690223] systemd[1]: Starting Load/Save Random Seed... [ 8.697603] systemd[1]: Starting Create System Users... [ 8.736415] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.736415] [ 8.753080] systemd[1]: Finished Load/Save Random Seed. [ 8.760824] systemd[1]: Finished Create System Users. [ 8.767547] systemd[1]: Finished Load Kernel Modules. [ 8.772156] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.779580] systemd[1]: Mounting Kernel Configuration File System... [ 8.787556] systemd[1]: Started OP-TEE Client Supplicant. [ 8.795281] systemd[1]: Starting Apply Kernel Variables... [ 8.802809] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.813587] systemd[1]: Finished Set the console keyboard layout. [ 8.817589] systemd[1]: Mounted Kernel Configuration File System. [ 10.188371] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.201606] imx219 9-0010: board setup failed [ 10.203056] imx219: probe of 9-0010 failed with error -121 [ 10.232974] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.238173] imx219 10-0010: board setup failed [ 10.238283] imx219: probe of 10-0010 failed with error -121 [ 10.326494] hot-surface-alert cooling state: 0 -> 1 [ 11.369102] using random self ethernet address [ 11.389889] using random host ethernet address [ 11.464813] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.464820] Creating 1 MTD partitions on "spi6.0": [ 11.464830] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.537123] using random self ethernet address [ 12.538707] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.824878] nvidia: loading out-of-tree module taints kernel. [ 59.998520] watchdog: watchdog0: watchdog did not stop! [ 60.445631] Trying to unregister non-registered hwtime source [ 63.503686] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.505250] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.340] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.341] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.342] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.343] I> dram_block larger than 80000000 [0002.345] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.357] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.360] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized noc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 aÿâavfs_clk_platform_post initialized ÿäarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.617] E> invalid display type [0003.618] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.647] I> edid read success [0003.647] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.648] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.681] I> width = 720, height = 480, frequency = 26973026 [0003.686] I> width = 720, height = 576, frequency = 26973026 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 4096, height = 2160, frequency = 296703296 [0003.721] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.732] I> hdmi_enable, starting HDMI initialisation [0003.737] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.746] calling apps_init() [0003.747] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000738] Console: colour dummy device 80x25 [ 0.002269] printk: console [tty0] enabled [ 0.002340] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002391] pid_max: default: 32768 minimum: 301 [ 0.002593] LSM: Security Framework initializing [ 0.002652] Yama: becoming mindful. [ 0.002694] SELinux: Initializing. [ 0.002843] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002881] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005914] rcu: Hierarchical SRCU implementation. [ 0.006163] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007072] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007167] DTB Build time: Aug 10 2022 20:31:49 [ 0.010134] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010411] Remapping and enabling EFI services. [ 0.012408] smp: Bringing up secondary CPUs ... [ 0.042931] Detected PIPT I-cache on CPU1 [ 0.043007] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072903] Detected PIPT I-cache on CPU2 [ 0.072980] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102622] Detected PIPT I-cache on CPU3 [ 0.102693] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132415] Detected PIPT I-cache on CPU4 [ 0.132514] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162168] Detected PIPT I-cache on CPU5 [ 0.162236] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162555] smp: Brought up 1 node, 6 CPUs [ 0.162854] SMP: Total of 6 processors activated. [ 0.162919] CPU features: detected: Privileged Access Never [ 0.162945] CPU features: detected: LSE atomic instructions [ 0.162963] CPU features: detected: User Access Override [ 0.162980] CPU features: detected: 32-bit EL0 Support [ 0.162996] CPU features: detected: RAS Extension Support [ 0.163012] CPU features: detected: CRC32 instructions [ 0.163028] CPU features: detected: 32-bit EL1 Support [ 0.229790] CPU: All CPU(s) started at EL2 [ 0.235428] devtmpfs: initialized [ 0.297926] Registered cp15_barrier emulation handler [ 0.298000] Registered setend emulation handler [ 0.298056] KASLR enabled [ 0.298342] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.298391] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.300742] pinctrl core: initialized pinctrl subsystem [ 0.302067] SMBIOS 3.0.0 present. [ 0.302132] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.302998] NET: Registered protocol family 16 [ 0.305494] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.306214] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.306702] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.306795] audit: initializing netlink subsys (disabled) [ 0.307162] audit: type=2000 audit(0.304:1): state=initialized audit_enabled=0 res=1 [ 0.307713] thermal_sys: Registered thermal governor 'step_wise' [ 0.307721] thermal_sys: Registered thermal governor 'power_allocator' [ 0.307748] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.310704] cpuidle: using governor menu [ 0.311160] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.311650] ASID allocator initialised with 32768 entries [ 0.311935] Serial: AMBA PL011 UART driver [ 0.315509] Tegra reboot handler registered. [ 0.382752] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.382889] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.383093] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.383165] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.383325] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.383369] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.383494] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.383537] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.383675] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.383727] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.386454] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.386495] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.386528] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.386559] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.386593] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.386650] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.386691] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.386744] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.386776] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.386829] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.386858] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.386885] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.386912] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.386940] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.386968] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.386995] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.387022] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.387126] mc-err: mcerr ops are set to t19x [ 0.397501] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.397544] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.397562] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.397580] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.405518] ACPI: Interpreter disabled. [ 0.407036] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.408767] iommu: Default domain type: Translated [ 0.408905] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.409358] SCSI subsystem initialized [ 0.409629] usbcore: registered new interface driver usbfs [ 0.409683] usbcore: registered new interface driver hub [ 0.409760] usbcore: registered new device driver usb [ 0.410307] mc: Linux media interface: v0.10 [ 0.410345] videodev: Linux video capture interface: v2.00 [ 0.410733] pps_core: LinuxPPS API ver. 1 registered [ 0.410753] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.410782] PTP clock support registered [ 0.411042] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.411596] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.411707] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.412362] Registered efivars operations [ 0.420542] FPGA manager framework [ 0.420733] Advanced Linux Sound Architecture Driver Initialized. [ 0.421548] Bluetooth: Core ver 2.22 [ 0.421604] NET: Registered protocol family 31 [ 0.421626] Bluetooth: HCI device and connection manager initialized [ 0.421659] Bluetooth: HCI socket layer initialized [ 0.421692] Bluetooth: L2CAP socket layer initialized [ 0.421736] Bluetooth: SCO socket layer initialized [ 0.423464] camchar: rtcpu character device driver loaded [ 0.424269] clocksource: Switched to clocksource arch_sys_counter [ 0.827850] VFS: Disk quotas dquot_6.6.0 [ 0.827955] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.828545] pnp: PnP ACPI: disabled [ 0.841406] la/ptsa driver initialized. [ 0.841563] NET: Registered protocol family 2 [ 0.841793] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.850724] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.850890] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.851264] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.851900] TCP: Hash tables configured (established 65536 bind 65536) [ 0.852077] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.852212] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.852612] NET: Registered protocol family 1 [ 0.853645] RPC: Registered named UNIX socket transport module. [ 0.853688] RPC: Registered udp transport module. [ 0.853707] RPC: Registered tcp transport module. [ 0.853723] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.853748] PCI: CLS 0 bytes, default 64 [ 0.854028] Trying to unpack rootfs image as initramfs... [ 1.117782] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.120744] Freeing initrd memory: 8196K [ 1.125034] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.125069] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.125117] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.125406] kvm [1]: IPA Size Limit: 40 bits [ 1.125873] kvm [1]: vgic interrupt IRQ9 [ 1.126450] kvm [1]: VHE mode initialized successfully [ 1.127677] Initialise system trusted keyrings [ 1.127961] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.133344] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.134222] NFS: Registering the id_resolver key type [ 1.134257] Key type id_resolver registered [ 1.134273] Key type id_legacy registered [ 1.134357] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.134381] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.134419] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.144828] NET: Registered protocol family 38 [ 1.144852] Key type asymmetric registered [ 1.144868] Asymmetric key parser 'x509' registered [ 1.144932] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.145165] io scheduler mq-deadline registered [ 1.145184] io scheduler kyber registered [ 1.150992] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.154076] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.154165] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.154246] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.154326] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.154413] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.160298] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.160315] scrncapt: init (heads:4 wins:6 planes:4) [ 1.161419] EINJ: ACPI disabled. [ 1.164974] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.165001] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.165018] tegra-pmc: ### PMC reset level: L1 [ 1.165034] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.165088] tegra-pmc: PMC Prod config success [ 1.170155] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.175016] random: fast init done [ 1.175201] printk: console [ttyTCU0] enabled [ 2.728480] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.732093] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.736671] arm-smmu 10000000.iommu: stage 1 translation [ 2.742169] arm-smmu 10000000.iommu: stage 2 translation [ 2.747938] arm-smmu 10000000.iommu: nested translation [ 2.753050] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.760222] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.770111] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.773326] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.780136] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.787686] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.793177] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.797899] arm-smmu 12000000.iommu: stage 1 translation [ 2.803158] arm-smmu 12000000.iommu: stage 2 translation [ 2.808835] arm-smmu 12000000.iommu: nested translation [ 2.814014] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.821193] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.830942] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.834564] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.840870] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.848608] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.858239] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.861539] tegra_profiler: auth: init [ 2.865541] THERMAL EST: found 3 subdevs [ 2.869220] THERMAL EST num_resources: 0 [ 2.872807] [THERMAL EST subdev 0] [ 2.876394] [THERMAL EST subdev 1] [ 2.879531] [THERMAL EST subdev 2] [ 2.883061] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.889597] THERMAL EST: thz register success. [ 2.893744] THERMAL EST: end of probe, return err: 0 [ 2.898836] nvsciipc: loaded module [ 2.906139] tun: Universal TUN/TAP device driver, 1.6 [ 2.908650] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.914821] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.920153] e1000e: Intel(R) PRO/1000 Network Driver [ 2.925301] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.931124] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.936673] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.942949] PPP generic driver version 2.4.2 [ 2.946866] PPP BSD Compression module registered [ 2.951684] PPP Deflate Compression module registered [ 2.956907] PPP MPPE Compression module registered [ 2.961682] usbcore: registered new interface driver r8152 [ 2.967433] usbcore: registered new interface driver asix [ 2.972494] usbcore: registered new interface driver ax88179_178a [ 2.978617] usbcore: registered new interface driver cdc_ether [ 2.984823] usbcore: registered new interface driver net1080 [ 2.990424] usbcore: registered new interface driver cdc_subset [ 2.996209] usbcore: registered new interface driver zaurus [ 3.001902] usbcore: registered new interface driver cdc_ncm [ 3.007582] usbcore: registered new interface driver aqc111 [ 3.013219] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.019557] ohci-pci: OHCI PCI platform driver [ 3.023605] ohci-platform: OHCI generic platform driver [ 3.029544] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.036103] usbcore: registered new interface driver uas [ 3.040184] usbcore: registered new interface driver usb-storage [ 3.046102] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.052375] mousedev: PS/2 mouse device common for all mice [ 3.057044] usbcore: registered new interface driver xpad [ 3.065318] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.068017] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.075839] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.082066] i2c /dev entries driver [ 3.085785] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.091688] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.096558] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.102064] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.107580] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.113116] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.118522] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.131907] device-mapper: uevent: version 1.0.3 [ 3.132360] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.138750] cpuidle: Initializing cpuidle driver [ 3.142971] sdhci: Secure Digital Host Controller Interface driver [ 3.147664] sdhci: Copyright(c) Pierre Ossman [ 3.151520] Synopsys Designware Multimedia Card Interface Driver [ 3.157973] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.164057] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.164913] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.177481] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.200459] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.210250] vdd-1v0: supplied by regulator-dummy [ 3.215728] vdd-1v8-hs: supplied by regulator-dummy [ 3.220534] vdd-1v8-ls: supplied by regulator-dummy [ 3.225448] vdd-1v8-ao: supplied by regulator-dummy [ 3.229433] vddio-ddr-1v1: supplied by regulator-dummy [ 3.233944] vdd-rtc: supplied by regulator-dummy [ 3.235654] spmic-ldo1: supplied by regulator-dummy [ 3.236904] vdd-ao-3v3: supplied by regulator-dummy [ 3.243138] vddio-emmc-3v3: supplied by regulator-dummy [ 3.249448] spmic-ldo4: supplied by regulator-dummy [ 3.250722] vdd-usb-3v3: supplied by regulator-dummy [ 3.256972] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.263131] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.268753] spmic-ldo8: supplied by vdd-1v8-ls [ 3.270245] gpio-510 (gpio_default): hogged as output/high [ 3.271607] gpio-511 (gpio_default): hogged as output/high [ 3.274527] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.410269] max77686-rtc max77620-rtc: registered as rtc0 [ 3.411338] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.411721] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.253704] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.254967] hid: raw HID events driver (C) Jiri Kosina [ 4.255824] usbcore: registered new interface driver usbhid [ 4.256010] usbhid: USB HID core driver [ 4.258437] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.259685] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.074270] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.148228] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 74.767 ms) ÿá[ 4.343575] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.344151] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.345377] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.346077] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.347706] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.348431] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.349051] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.350434] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.350770] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.352636] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.359660] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.366774] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.373935] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.377898] denver_knobs_init:MTS_VERSION:55637613 [ 4.391987] t19x_cache tegra-cache: probed [ 4.395396] optee: probing for conduit method. [ 4.396342] optee: revision 3.16 (65cc2218) [ 4.397272] optee: dynamic shared memory is enabled [ 4.398551] optee: initialized driver [ 4.406923] nvpmodel: initialized successfully [ 4.407687] tegra_hv: get_hvd: not initialized yet [ 4.410993] user_ivc_mempool: hypervisor not present [ 4.417085] usbcore: registered new interface driver snd-usb-audio [ 4.423554] u32 classifier [ 4.424551] input device check on [ 4.428184] Actions configured [ 4.432094] Initializing XFRM netlink socket [ 4.437098] NET: Registered protocol family 10 [ 4.444149] Segment Routing with IPv6 [ 4.444507] NET: Registered protocol family 17 [ 4.448641] NET: Registered protocol family 15 [ 4.452798] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.466530] Bluetooth: RFCOMM socket layer initialized [ 4.471353] Bluetooth: RFCOMM ver 1.11 [ 4.474939] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.481050] Bluetooth: HIDP socket layer initialized [ 4.486626] 9pnet: Installing 9P2000 support [ 4.490218] Key type dns_resolver registered [ 4.495996] registered taskstats version 1 [ 4.498643] Loading compiled-in X.509 certificates [ 4.512420] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.514885] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.525108] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.526817] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.535162] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.543779] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.660407] tegra194-pcie 14160000.pcie: Link up [ 4.663417] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.663659] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.663914] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.664156] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.664455] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.664950] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.665410] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.678339] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.678903] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.679430] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.681156] pci 0004:01:00.0: supports D1 D2 [ 4.681356] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.692628] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.692969] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.693299] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.693761] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.694009] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.694280] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.694973] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.702528] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.710937] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.721606] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.725880] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.731956] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.738868] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.747659] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.748876] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.757579] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.765816] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.881277] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.881833] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.882077] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.882299] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.882547] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.882740] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.883174] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.883651] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.903948] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.904414] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.906029] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.907225] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.909029] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.910459] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.911554] pci 0005:00:00.0: Removing from iommu group 7 [ 5.911833] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.952586] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.977196] host1x 13e10000.host1x: initialized [ 5.978978] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.979848] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.981251] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.982038] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.983261] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.983939] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.985429] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.986060] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.987083] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.987772] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.991669] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.998470] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.008472] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.015188] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.025090] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.032448] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.042257] falcon 15340000.vic: Adding to iommu group 17 [ 6.056868] falcon 15340000.vic: initialized [ 6.058077] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.063820] falcon 15380000.nvjpg: initialized [ 6.064549] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.075317] falcon 154c0000.nvenc: initialized [ 6.075813] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.086154] falcon 15a80000.nvenc1: initialized [ 6.086869] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.097897] nvdec 15480000.nvdec: initialized [ 6.098423] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.107764] nvdec 15140000.nvdec1: initialized [ 6.108360] tsec 15500000.tsec: Adding to iommu group 18 [ 6.114707] tsec 15500000.tsec: initialized [ 6.115466] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.122741] tsec 15100000.tsecb: initialized [ 6.126979] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.156170] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.169946] gpio-374 (wifi-enable): hogged as output/high [ 6.170283] gpio-431 (camera-control-output-low): hogged as output/low [ 6.170699] gpio-432 (camera-control-output-low): hogged as output/low [ 6.172820] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.175562] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.176554] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.178793] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.179289] random: crng init done [ 6.182409] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.189167] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.193717] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.202458] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.209218] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.221408] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.225873] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.231756] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.240415] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.250151] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.257193] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.264969] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.270853] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.280839] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.286774] pva 16000000.pva0: Adding to iommu group 22 [ 6.314006] pva 16000000.pva0: initialized [ 6.318559] pva 16800000.pva1: Adding to iommu group 23 [ 6.330137] pva 16800000.pva1: initialized [ 6.334362] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.355451] nvdla 15880000.nvdla0: initialized [ 6.356866] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.365453] nvdla 158c0000.nvdla1: initialized [ 6.369677] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.369765] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.370008] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.370191] tegradc 15200000.display: Adding to iommu group 26 [ 6.370623] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.370920] tegradccommon 15200000.display-hub: dma mapping done [ 6.372585] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.373561] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.376670] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.378205] tegradc 15210000.display: Adding to iommu group 26 [ 6.378431] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.378573] generic_infoframe_type: 0x87 [ 6.378666] tegradc 15200000.display: DT parsed successfully [ 6.378773] tegradc 15200000.display: Display dc.000000004f0a624e registered with id=0 [ 6.382199] tegra_cec 3960000.tegra_cec: probed [ 6.382523] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.382534] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.382537] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.383448] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.383456] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.384585] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.387233] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.388834] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.395827] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.401407] tegradc 15210000.display: disp0 connected to head1->sor [ 6.406757] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.412673] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.417366] kfuse 3830000.kfuse: initialized [ 6.425273] tegradc 15210000.display: DT parsed successfully [ 6.434224] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.441612] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.528507] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.535980] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.541984] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.551050] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.556419] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.565717] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.571539] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.591276] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.591618] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.594816] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.602629] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.611413] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.618078] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.625801] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.633038] usb usb1: Product: xHCI Host Controller [ 6.637681] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.644024] usb usb1: SerialNumber: 3610000.xhci [ 6.649653] hub 1-0:1.0: USB hub found [ 6.652837] hub 1-0:1.0: 4 ports detected [ 6.657500] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.662206] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.669554] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.677277] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.685397] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.692654] usb usb2: Product: xHCI Host Controller [ 6.697359] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.703576] usb usb2: SerialNumber: 3610000.xhci [ 6.708973] hub 2-0:1.0: USB hub found [ 6.711999] hub 2-0:1.0: 4 ports detected [ 6.754637] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.760936] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.762625] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.762860] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.775536] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.776590] tegra194-cpufreq ccplex: probed with BWMGR [ 6.778072] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.778585] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.779130] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.780400] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.788144] tegra194-vi5 15c10000.vi: initialized [ 6.789534] mmc0: CQHCI version 5.10 [ 6.789680] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.790799] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.795937] generic_infoframe_type: 0x87 [ 6.802327] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.806097] tegradc 15200000.display: DT parsed successfully [ 6.814213] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.819979] tegradc 15200000.display: Display dc.00000000a0101443 registered with id=0 [ 6.826245] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.826273] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.835890] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.841110] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.848351] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.855766] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.860001] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.862369] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.862392] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.898597] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.899244] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.914121] nvethernet 2490000.ethernet: Macsec not supported [ 6.919662] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.920786] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.925646] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.932277] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.934824] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.940389] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.947154] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.971059] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.978347] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.979017] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.985047] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.987127] tegradc 15200000.display: probed [ 6.992814] tegra-se-nvhost 15810000.se: initialized [ 7.013078] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.014430] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.021497] tegra-se-nvhost 15820000.se: initialized [ 7.026983] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.032205] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.038647] tegra-se-nvhost 15830000.se: initialized [ 7.043889] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.049482] Console: switching to colour frame buffer device 240x67 [ 7.049623] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.055150] tegradc 15200000.display: fb registered [ 7.059388] mmc0: Command Queue Engine enabled [ 7.059394] mmc0: periodic cache flush enabled [ 7.059408] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.059928] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.060094] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.062278] tegra-se-nvhost 15840000.se: initialized [ 7.064068] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.066481] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.072324] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.075752] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.082774] tegra_actmon d230000.actmon: in actmon_register()... [ 7.086506] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.093438] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.119772] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.124380] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.129782] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.129793] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.136483] hvc_sysfs: hypervisor is not present [ 7.141234] usb 1-2: Manufacturer: Generic [ 7.143373] hub 1-2:1.0: USB hub found [ 7.152417] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.159096] hub 1-2:1.0: 4 ports detected [ 7.177788] ALSA device list: [ 7.178902] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.182643] No soundcards found. [ 7.191112] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.191977] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.224713] Extcon AUX1(HDMI) enable [ 7.224828] tegradc 15210000.display: disp1 connected to head1->sor [ 7.234805] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.241822] tegradc 15210000.display: DT parsed successfully [ 7.247650] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.255157] tegradc 15210000.display: Display dc.00000000aed0f79a registered with id=1 [ 7.263094] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.268812] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.282522] tegradc 15210000.display: probed [ 7.282926] tegradc 15210000.display: fb registered [ 7.288037] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.290139] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.290608] Freeing unused kernel memory: 3968K [ 7.291651] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.300243] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.304947] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.312564] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.312571] usb 2-3: Manufacturer: Generic [ 7.323299] hub 2-3:1.0: USB hub found [ 7.330257] Run /init as init process [ 7.336321] hub 2-3:1.0: 4 ports detected [ 7.346251] tegradc 15210000.display: blank - powerdown [ 7.352006] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.352031] Extcon DP: HPD disabled [ 7.352035] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.352052] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.375081] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.387301] tegradc 15200000.display: blank - powerdown [ 7.396310] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.408324] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.411533] Root device found: mmcblk0p1 [ 7.413580] Found dev node: /dev/mmcblk0p1 [ 7.436198] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.436204] Extcon AUX1(HDMI) disable [ 7.449919] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.454218] Rootfs mounted over mmcblk0p1 [ 7.459710] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.460603] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.460863] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.460868] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.472533] tegradc 15200000.display: unblank [ 7.473659] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.473855] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.480212] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.482148] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.484083] Switching from initrd to actual rootfs [ 7.486215] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.486219] Extcon AUX1(HDMI) enable [ 7.498902] tegradc 15200000.display: sync windows ret = 247 [ 7.537883] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.544843] Extcon HDMI: HPD enabled [ 7.548598] tegradc 15200000.display: hdmi: plugged [ 7.561640] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.563094] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.569259] usb 1-3: Product: Bluetooth Radio [ 7.573713] usb 1-3: Manufacturer: Realtek [ 7.577824] usb 1-3: SerialNumber: 00e04c000001 [ 7.653989] systemd[1]: System time before build time, advancing clock. [ 7.726457] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.731383] systemd[1]: Detected architecture arm64. [ 7.779217] systemd[1]: Set hostname to . [ 7.948762] systemd-sysv-generator[245]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.304020] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.305762] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.311592] systemd[1]: Created slice system-modprobe.slice. [ 8.316403] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.320530] systemd[1]: Created slice User and Session Slice. [ 8.323956] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.328045] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.331407] systemd[1]: Reached target User and Group Name Lookups. [ 8.334518] systemd[1]: Reached target Slices. [ 8.337497] systemd[1]: Reached target Swap. [ 8.341396] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.344928] systemd[1]: Listening on Syslog Socket. [ 8.348437] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.351725] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.355874] systemd[1]: Listening on Journal Audit Socket. [ 8.359508] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.363245] systemd[1]: Listening on Journal Socket. [ 8.367945] systemd[1]: Listening on udev Control Socket. [ 8.371457] systemd[1]: Listening on udev Kernel Socket. [ 8.380735] systemd[1]: Mounting Huge Pages File System... [ 8.389566] systemd[1]: Mounting POSIX Message Queue File System... [ 8.397896] systemd[1]: Mounting RPC Pipe File System... [ 8.406605] systemd[1]: Mounting Kernel Debug File System... [ 8.415372] systemd[1]: Mounting Kernel Trace File System... [ 8.425506] systemd[1]: Starting Journal Service... [ 8.434554] systemd[1]: Starting Set the console keyboard layout... [ 8.442902] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.446339] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.453019] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.461248] systemd[1]: Started Nameserver information manager. [ 8.465803] systemd[1]: Reached target Network (Pre). [ 8.472970] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.474789] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.483045] systemd[1]: Starting Load Kernel Modules... [ 8.490838] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.498853] systemd[1]: Starting udev Coldplug all Devices... [ 8.510095] systemd[1]: Mounted Huge Pages File System. [ 8.513957] systemd[1]: Mounted POSIX Message Queue File System. [ 8.521410] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.525678] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.528656] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.530228] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.531379] systemd[1]: Mounted RPC Pipe File System. [ 8.531672] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.534638] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.536235] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.537794] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.537966] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.537978] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.545285] systemd[1]: Mounted Kernel Debug File System. [ 8.548778] systemd[1]: Mounted Kernel Trace File System. [ 8.555924] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.561445] systemd[1]: nvfb-udev.service: Succeeded. [ 8.565486] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.575440] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.589122] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.590865] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.598539] systemd[1]: Starting Load/Save Random Seed... [ 8.606477] systemd[1]: Starting Create System Users... [ 8.636687] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.636687] [ 8.663800] systemd[1]: Finished Load/Save Random Seed. [ 8.671838] systemd[1]: Finished Load Kernel Modules. [ 8.678736] systemd[1]: Finished Set the console keyboard layout. [ 8.684892] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.691961] systemd[1]: Mounting Kernel Configuration File System... [ 8.700561] systemd[1]: Started OP-TEE Client Supplicant. [ 8.708844] systemd[1]: Starting Apply Kernel Variables... [ 8.716926] systemd[1]: Mounted Kernel Configuration File System. [ 8.728028] systemd[1]: Finished Create System Users. [ 8.736591] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.133280] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.139515] imx219 9-0010: board setup failed [ 10.141097] imx219: probe of 9-0010 failed with error -121 [ 10.166642] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.176659] imx219 10-0010: board setup failed [ 10.176791] imx219: probe of 10-0010 failed with error -121 [ 10.301992] hot-surface-alert cooling state: 0 -> 1 [ 10.863010] using random self ethernet address [ 10.902961] using random host ethernet address [ 11.851368] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.851376] Creating 1 MTD partitions on "spi6.0": [ 11.851386] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.437814] using random self ethernet address [ 12.439644] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.821878] nvidia: loading out-of-tree module taints kernel. [ 59.398312] watchdog: watchdog0: watchdog did not stop! [ 59.857797] Trying to unregister non-registered hwtime source [ 62.915296] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.916880] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR]ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.614] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.631] I> edid read success [0003.644] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.744] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932988K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475328K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000724] Console: colour dummy device 80x25 [ 0.002165] printk: console [tty0] enabled [ 0.002229] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002266] pid_max: default: 32768 minimum: 301 [ 0.002431] LSM: Security Framework initializing [ 0.002490] Yama: becoming mindful. [ 0.002534] SELinux: Initializing. [ 0.002701] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002767] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005912] rcu: Hierarchical SRCU implementation. [ 0.006183] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006836] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006900] DTB Build time: Aug 10 2022 20:31:49 [ 0.009537] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009759] Remapping and enabling EFI services. [ 0.011892] smp: Bringing up secondary CPUs ... [ 0.041100] Detected PIPT I-cache on CPU1 [ 0.041220] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075487] Detected PIPT I-cache on CPU2 [ 0.075645] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105221] Detected PIPT I-cache on CPU3 [ 0.105365] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135015] Detected PIPT I-cache on CPU4 [ 0.135115] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164798] Detected PIPT I-cache on CPU5 [ 0.164948] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165337] smp: Brought up 1 node, 6 CPUs [ 0.165508] SMP: Total of 6 processors activated. [ 0.165590] CPU features: detected: Privileged Access Never [ 0.165616] CPU features: detected: LSE atomic instructions [ 0.165631] CPU features: detected: User Access Override [ 0.165645] CPU features: detected: 32-bit EL0 Support [ 0.165658] CPU features: detected: RAS Extension Support [ 0.165672] CPU features: detected: CRC32 instructions [ 0.165685] CPU features: detected: 32-bit EL1 Support [ 0.236229] CPU: All CPU(s) started at EL2 [ 0.243511] devtmpfs: initialized [ 0.290070] Registered cp15_barrier emulation handler [ 0.290194] Registered setend emulation handler [ 0.290216] KASLR enabled [ 0.290514] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.290539] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291910] pinctrl core: initialized pinctrl subsystem [ 0.292812] SMBIOS 3.0.0 present. [ 0.292842] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.293512] NET: Registered protocol family 16 [ 0.295461] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296019] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296740] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296793] audit: initializing netlink subsys (disabled) [ 0.297148] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.297532] thermal_sys: Registered thermal governor 'step_wise' [ 0.297539] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297557] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300238] cpuidle: using governor menu [ 0.300573] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300972] ASID allocator initialised with 32768 entries [ 0.301195] Serial: AMBA PL011 UART driver [ 0.304641] Tegra reboot handler registered. [ 0.383359] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.383486] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.383684] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.383775] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.383980] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.384068] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.384237] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.384289] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.384412] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.384459] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.386754] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.386793] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.386824] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.386853] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.386885] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.386913] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.386951] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.386987] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.387013] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.387038] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.387086] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.387126] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.387152] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.387194] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.387222] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.387248] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.387272] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.387369] mc-err: mcerr ops are set to t19x [ 0.401080] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.401101] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.401114] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.401127] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.407775] ACPI: Interpreter disabled. [ 0.409037] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.410366] iommu: Default domain type: Translated [ 0.410452] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.410827] SCSI subsystem initialized [ 0.410995] usbcore: registered new interface driver usbfs [ 0.411042] usbcore: registered new interface driver hub [ 0.411078] usbcore: registered new device driver usb [ 0.411504] mc: Linux media interface: v0.10 [ 0.411535] videodev: Linux video capture interface: v2.00 [ 0.411880] pps_core: LinuxPPS API ver. 1 registered [ 0.411893] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.411920] PTP clock support registered [ 0.412135] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.412483] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.412587] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.413241] Registered efivars operations [ 0.418820] FPGA manager framework [ 0.418963] Advanced Linux Sound Architecture Driver Initialized. [ 0.419558] Bluetooth: Core ver 2.22 [ 0.419599] NET: Registered protocol family 31 [ 0.419611] Bluetooth: HCI device and connection manager initialized [ 0.419627] Bluetooth: HCI socket layer initialized [ 0.419643] Bluetooth: L2CAP socket layer initialized [ 0.419665] Bluetooth: SCO socket layer initialized [ 0.421269] camchar: rtcpu character device driver loaded [ 0.422058] clocksource: Switched to clocksource arch_sys_counter [ 0.724238] VFS: Disk quotas dquot_6.6.0 [ 0.724342] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.724679] pnp: PnP ACPI: disabled [ 0.735095] la/ptsa driver initialized. [ 0.735272] NET: Registered protocol family 2 [ 0.735454] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.740756] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.740840] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.741152] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.741593] TCP: Hash tables configured (established 65536 bind 65536) [ 0.741732] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.741839] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.742025] NET: Registered protocol family 1 [ 0.742849] RPC: Registered named UNIX socket transport module. [ 0.742878] RPC: Registered udp transport module. [ 0.742895] RPC: Registered tcp transport module. [ 0.742911] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.742948] PCI: CLS 0 bytes, default 64 [ 0.743261] Trying to unpack rootfs image as initramfs... [ 1.017879] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.021015] Freeing initrd memory: 8196K [ 1.026312] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.026349] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.026392] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.026860] kvm [1]: IPA Size Limit: 40 bits [ 1.027380] kvm [1]: vgic interrupt IRQ9 [ 1.027945] kvm [1]: VHE mode initialized successfully [ 1.029681] Initialise system trusted keyrings [ 1.030000] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.037526] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.038470] NFS: Registering the id_resolver key type [ 1.038548] Key type id_resolver registered [ 1.038572] Key type id_legacy registered [ 1.038688] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.038715] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.038782] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.050426] NET: Registered protocol family 38 [ 1.050454] Key type asymmetric registered [ 1.050472] Asymmetric key parser 'x509' registered [ 1.050542] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.050844] io scheduler mq-deadline registered [ 1.050893] io scheduler kyber registered [ 1.057175] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.060444] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.060565] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.060667] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.060739] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.060815] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.066259] scrncapt: init (heads:4 wins:6 planes:4) [ 1.066559] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.067452] EINJ: ACPI disabled. [ 1.070777] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.070802] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.070817] tegra-pmc: ### PMC reset level: L1 [ 1.070830] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.070879] tegra-pmc: PMC Prod config success [ 1.076423] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.081574] random: fast init done [ 1.082267] printk: console [ttyTCU0] enabled [ 2.634252] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.638166] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.642826] arm-smmu 10000000.iommu: stage 1 translation [ 2.648499] arm-smmu 10000000.iommu: stage 2 translation [ 2.653724] arm-smmu 10000000.iommu: nested translation [ 2.659069] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.666499] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.678496] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.679336] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.685927] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.694028] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.698966] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.703702] arm-smmu 12000000.iommu: stage 1 translation [ 2.709197] arm-smmu 12000000.iommu: stage 2 translation [ 2.714884] arm-smmu 12000000.iommu: nested translation [ 2.720308] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.727229] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.739323] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.740326] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.747169] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.754420] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.764590] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.767757] tegra_profiler: auth: init [ 2.772012] THERMAL EST: found 3 subdevs [ 2.775272] THERMAL EST num_resources: 0 [ 2.778852] [THERMAL EST subdev 0] [ 2.782439] [THERMAL EST subdev 1] [ 2.785564] [THERMAL EST subdev 2] [ 2.788878] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.795579] THERMAL EST: thz register success. [ 2.799535] THERMAL EST: end of probe, return err: 0 [ 2.804962] nvsciipc: loaded module [ 2.812422] tun: Universal TUN/TAP device driver, 1.6 [ 2.814555] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.820844] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.826204] e1000e: Intel(R) PRO/1000 Network Driver [ 2.831344] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.837447] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.842470] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.848830] PPP generic driver version 2.4.2 [ 2.852936] PPP BSD Compression module registered [ 2.857435] PPP Deflate Compression module registered [ 2.862683] PPP MPPE Compression module registered [ 2.867955] usbcore: registered new interface driver r8152 [ 2.873207] usbcore: registered new interface driver asix [ 2.878810] usbcore: registered new interface driver ax88179_178a [ 2.884923] usbcore: registered new interface driver cdc_ether [ 2.890881] usbcore: registered new interface driver net1080 [ 2.896472] usbcore: registered new interface driver cdc_subset [ 2.902272] usbcore: registered new interface driver zaurus [ 2.908214] usbcore: registered new interface driver cdc_ncm [ 2.913882] usbcore: registered new interface driver aqc111 [ 2.919257] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.925630] ohci-pci: OHCI PCI platform driver [ 2.929648] ohci-platform: OHCI generic platform driver [ 2.935770] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.941862] usbcore: registered new interface driver uas [ 2.945974] usbcore: registered new interface driver usb-storage [ 2.952408] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.958268] mousedev: PS/2 mouse device common for all mice [ 2.963353] usbcore: registered new interface driver xpad [ 2.971522] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.974092] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.981905] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.988212] i2c /dev entries driver [ 2.991818] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.997731] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.002908] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.008337] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.013743] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.019276] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.024343] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.038491] device-mapper: uevent: version 1.0.3 [ 3.039017] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.044837] cpuidle: Initializing cpuidle driver [ 3.049063] sdhci: Secure Digital Host Controller Interface driver [ 3.053714] sdhci: Copyright(c) Pierre Ossman [ 3.057549] Synopsys Designware Multimedia Card Interface Driver [ 3.063725] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.069753] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.070635] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.083117] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.106738] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.116752] vdd-1v0: supplied by regulator-dummy [ 3.122366] vdd-1v8-hs: supplied by regulator-dummy [ 3.127323] vdd-1v8-ls: supplied by regulator-dummy [ 3.132324] vdd-1v8-ao: supplied by regulator-dummy [ 3.136539] vddio-ddr-1v1: supplied by regulator-dummy [ 3.141108] vdd-rtc: supplied by regulator-dummy [ 3.143032] spmic-ldo1: supplied by regulator-dummy [ 3.144329] vdd-ao-3v3: supplied by regulator-dummy [ 3.150808] vddio-emmc-3v3: supplied by regulator-dummy [ 3.157231] spmic-ldo4: supplied by regulator-dummy [ 3.158633] vdd-usb-3v3: supplied by regulator-dummy [ 3.164918] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.171306] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.176892] spmic-ldo8: supplied by vdd-1v8-ls [ 3.178581] gpio-510 (gpio_default): hogged as output/high [ 3.179982] gpio-511 (gpio_default): hogged as output/high [ 3.183178] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.319533] max77686-rtc max77620-rtc: registered as rtc0 [ 3.320941] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.321315] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.164658] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.165854] hid: raw HID events driver (C) Jiri Kosina [ 4.166743] usbcore: registered new interface driver usbhid [ 4.166889] usbhid: USB HID core driver [ 4.168944] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.170621] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.977907] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.051954] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.856 ms) ÿá[ 4.254716] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.255356] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.256476] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.257295] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.258986] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.259623] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.260371] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.262259] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.262502] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.266011] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.271959] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.277780] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.283008] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.288669] denver_knobs_init:MTS_VERSION:55637613 [ 4.301013] t19x_cache tegra-cache: probed [ 4.304197] optee: probing for conduit method. [ 4.305008] optee: revision 3.16 (65cc2218) [ 4.306813] optee: dynamic shared memory is enabled [ 4.309879] optee: initialized driver [ 4.316895] nvpmodel: initialized successfully [ 4.317468] tegra_hv: get_hvd: not initialized yet [ 4.321872] user_ivc_mempool: hypervisor not present [ 4.328026] usbcore: registered new interface driver snd-usb-audio [ 4.334573] u32 classifier [ 4.335513] input device check on [ 4.339358] Actions configured [ 4.343142] Initializing XFRM netlink socket [ 4.348220] NET: Registered protocol family 10 [ 4.354426] Segment Routing with IPv6 [ 4.355102] NET: Registered protocol family 17 [ 4.359649] NET: Registered protocol family 15 [ 4.363806] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.377453] Bluetooth: RFCOMM socket layer initialized [ 4.382106] Bluetooth: RFCOMM ver 1.11 [ 4.386218] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.391809] Bluetooth: HIDP socket layer initialized [ 4.398018] 9pnet: Installing 9P2000 support [ 4.401248] Key type dns_resolver registered [ 4.407357] registered taskstats version 1 [ 4.409705] Loading compiled-in X.509 certificates [ 4.423541] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.425631] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.436239] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.437612] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.446516] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.454562] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.570178] tegra194-pcie 14160000.pcie: Link up [ 4.573020] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.573259] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.573598] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.573824] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.574140] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.574575] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.575020] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.587142] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.587659] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.588145] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.589680] pci 0004:01:00.0: supports D1 D2 [ 4.589896] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.601631] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.602053] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.602586] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.602963] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.603252] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.603463] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.604694] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.612226] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.620639] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.630979] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.635513] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.641536] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.648364] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.657897] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.658892] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.667381] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.675697] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.782181] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.782881] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.783100] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.783252] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.783623] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.783870] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.784319] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.784857] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.806474] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.806911] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.809096] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.810859] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.812495] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.814628] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.816030] pci 0005:00:00.0: Removing from iommu group 7 [ 5.816372] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.852600] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.877427] host1x 13e10000.host1x: initialized [ 5.879118] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.880031] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.881445] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.882337] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.883686] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.884339] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.885600] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.886545] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.887567] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.888300] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.892719] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.899515] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.909346] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.916476] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.926237] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.933338] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.943028] falcon 15340000.vic: Adding to iommu group 17 [ 5.958361] falcon 15340000.vic: initialized [ 5.959348] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.964550] falcon 15380000.nvjpg: initialized [ 5.965230] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.976678] falcon 154c0000.nvenc: initialized [ 5.977315] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.987278] falcon 15a80000.nvenc1: initialized [ 5.987879] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.999602] nvdec 15480000.nvdec: initialized [ 6.000172] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.010276] nvdec 15140000.nvdec1: initialized [ 6.010802] tsec 15500000.tsec: Adding to iommu group 18 [ 6.016865] tsec 15500000.tsec: initialized [ 6.017386] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.023484] tsec 15100000.tsecb: initialized [ 6.028097] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.054455] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.068159] gpio-374 (wifi-enable): hogged as output/high [ 6.068572] gpio-431 (camera-control-output-low): hogged as output/low [ 6.068898] gpio-432 (camera-control-output-low): hogged as output/low [ 6.070954] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.073286] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.073842] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.075597] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.079993] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.085983] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.091164] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.099919] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.107064] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.118734] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.123579] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.129476] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.138342] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.147256] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.154568] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.162626] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.168677] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.178417] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.184588] pva 16000000.pva0: Adding to iommu group 22 [ 6.211632] pva 16000000.pva0: initialized [ 6.216997] pva 16800000.pva1: Adding to iommu group 23 [ 6.228287] pva 16800000.pva1: initialized [ 6.232903] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.247839] nvdla 15880000.nvdla0: initialized [ 6.249295] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.258519] nvdla 158c0000.nvdla1: initialized [ 6.262753] tegradc 15200000.display: Adding to iommu group 26 [ 6.263098] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.263334] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.263705] tegradccommon 15200000.display-hub: dma mapping done [ 6.271547] tegradc 15210000.display: Adding to iommu group 26 [ 6.271700] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.272324] generic_infoframe_type: 0x87 [ 6.272561] tegradc 15200000.display: DT parsed successfully [ 6.272957] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.274810] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.282218] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.286430] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.294983] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.295014] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.308497] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.317613] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.322864] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.328137] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.329492] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.334396] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.344392] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.351627] tegra_cec 3960000.tegra_cec: probed [ 6.357771] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.365125] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.370502] tegradc 15210000.display: disp0 connected to head1->sor [ 6.378563] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.381803] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.388475] kfuse 3830000.kfuse: initialized [ 6.394771] tegradc 15210000.display: DT parsed successfully [ 6.402691] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.406514] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.426152] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.433562] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.439786] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.448741] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.454264] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.463947] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.469055] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.491463] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.492089] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.492424] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.500700] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.508959] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.515722] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.523115] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.530525] usb usb1: Product: xHCI Host Controller [ 6.535513] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.541778] usb usb1: SerialNumber: 3610000.xhci [ 6.547662] hub 1-0:1.0: USB hub found [ 6.550480] hub 1-0:1.0: 4 ports detected [ 6.555001] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.559512] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.567131] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.574919] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.582943] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.590171] usb usb2: Product: xHCI Host Controller [ 6.594936] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.601365] usb usb2: SerialNumber: 3610000.xhci [ 6.607105] hub 2-0:1.0: USB hub found [ 6.609547] hub 2-0:1.0: 4 ports detected [ 6.653406] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.659952] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.661435] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.661636] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.674581] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.675678] tegra194-cpufreq ccplex: probed with BWMGR [ 6.677061] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.677493] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.677957] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.679560] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.687309] tegra194-vi5 15c10000.vi: initialized [ 6.688219] mmc0: CQHCI version 5.10 [ 6.688684] tegradc 15210000.display: disp0 connected to head1->sor [ 6.690042] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.693651] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.699636] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.707073] tegradc 15210000.display: DT parsed successfully [ 6.714989] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.720366] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.726751] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.726761] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.734796] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.741539] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.761170] generic_infoframe_type: 0x87 [ 6.765169] tegradc 15200000.display: DT parsed successfully [ 6.770523] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.770680] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.779581] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.784540] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.785190] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.785198] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.793104] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.802170] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.807847] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.808309] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.823222] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.826100] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.830439] nvethernet 2490000.ethernet: Macsec not supported [ 6.863732] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.874342] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.875558] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.883586] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.889962] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.895830] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.905461] tegradc 15200000.display: probed [ 6.910384] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.923267] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.929478] tegra-se-nvhost 15810000.se: initialized [ 6.938136] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.939348] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.946031] tegra-se-nvhost 15820000.se: initialized [ 6.947189] mmc0: Command Queue Engine enabled [ 6.951896] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.954566] mmc0: periodic cache flush enabled [ 6.961104] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.965146] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.971882] tegra-se-nvhost 15830000.se: initialized [ 6.978650] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.983913] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.987625] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.993975] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.007363] Console: switching to colour frame buffer device 240x67 [ 7.013157] tegradc 15200000.display: fb registered [ 7.017957] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.024293] tegra-se-nvhost 15840000.se: initialized [ 7.024944] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.030471] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.034825] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.042149] tegra_actmon d230000.actmon: in actmon_register()... [ 7.048678] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.052701] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.062624] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.074305] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.081657] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.086294] usb 1-2: Manufacturer: Generic [ 7.086579] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.092308] hub 1-2:1.0: USB hub found [ 7.099313] hvc_sysfs: hypervisor is not present [ 7.103092] random: crng init done [ 7.107106] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.110373] hub 1-2:1.0: 4 ports detected [ 7.150744] ALSA device list: [ 7.150847] No soundcards found. [ 7.151879] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.152115] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.153132] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.153340] Extcon AUX1(HDMI) enable [ 7.156429] tegradc 15210000.display: disp1 connected to head1->sor [ 7.162660] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.169921] tegradc 15210000.display: DT parsed successfully [ 7.175298] tegradc 15210000.display: Display dc.00000000beb58b66 registered with id=1 [ 7.178971] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.183765] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.196889] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.209927] tegradc 15210000.display: probed [ 7.210292] tegradc 15210000.display: fb registered [ 7.215800] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.219730] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.221764] Freeing unused kernel memory: 3968K [ 7.227572] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.227579] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.227584] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.227588] usb 2-3: Manufacturer: Generic [ 7.227773] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.238356] hub 2-3:1.0: USB hub found [ 7.250330] Run /init as init process [ 7.254583] hub 2-3:1.0: 4 ports detected [ 7.273748] tegradc 15210000.display: blank - powerdown [ 7.279028] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.279032] Extcon DP: HPD disabled [ 7.279037] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.279049] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.303305] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.303415] tegradc 15200000.display: blank - powerdown [ 7.338509] Root device found: mmcblk0p1 [ 7.340588] Found dev node: /dev/mmcblk0p1 [ 7.340831] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.340836] Extcon AUX1(HDMI) disable [ 7.350115] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.364136] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.364927] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.366150] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.366158] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.376329] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.377650] tegradc 15200000.display: unblank [ 7.378726] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.378920] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.380440] Rootfs mounted over mmcblk0p1 [ 7.385027] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.386908] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.390865] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.390870] Extcon AUX1(HDMI) enable [ 7.403680] tegradc 15200000.display: sync windows ret = 247 [ 7.417323] Switching from initrd to actual rootfs [ 7.442913] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.450247] Extcon HDMI: HPD enabled [ 7.453905] tegradc 15200000.display: hdmi: plugged [ 7.499238] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.500785] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.502305] usb 1-3: Product: Bluetooth Radio [ 7.503785] usb 1-3: Manufacturer: Realtek [ 7.505195] usb 1-3: SerialNumber: 00e04c000001 [ 7.624242] systemd[1]: System time before build time, advancing clock. [ 7.695259] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.700409] systemd[1]: Detected architecture arm64. [ 7.742002] systemd[1]: Set hostname to . [ 7.913424] systemd-sysv-generator[251]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.265121] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.266999] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.272705] systemd[1]: Created slice system-modprobe.slice. [ 8.277636] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.281967] systemd[1]: Created slice User and Session Slice. [ 8.285546] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.289805] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.293339] systemd[1]: Reached target User and Group Name Lookups. [ 8.296829] systemd[1]: Reached target Slices. [ 8.300075] systemd[1]: Reached target Swap. [ 8.304345] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.308313] systemd[1]: Listening on Syslog Socket. [ 8.312098] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.315768] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.320223] systemd[1]: Listening on Journal Audit Socket. [ 8.324036] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.328008] systemd[1]: Listening on Journal Socket. [ 8.331913] systemd[1]: Listening on udev Control Socket. [ 8.337052] systemd[1]: Listening on udev Kernel Socket. [ 8.346896] systemd[1]: Mounting Huge Pages File System... [ 8.355468] systemd[1]: Mounting POSIX Message Queue File System... [ 8.363591] systemd[1]: Mounting RPC Pipe File System... [ 8.372238] systemd[1]: Mounting Kernel Debug File System... [ 8.380679] systemd[1]: Mounting Kernel Trace File System... [ 8.390748] systemd[1]: Starting Journal Service... [ 8.400095] systemd[1]: Starting Set the console keyboard layout... [ 8.408649] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.412366] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.418873] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.426982] systemd[1]: Started Nameserver information manager. [ 8.431973] systemd[1]: Reached target Network (Pre). [ 8.439363] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.441262] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.447654] systemd[1]: Starting Load Kernel Modules... [ 8.455821] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.464902] systemd[1]: Starting udev Coldplug all Devices... [ 8.475656] systemd[1]: Mounted Huge Pages File System. [ 8.479604] systemd[1]: Mounted POSIX Message Queue File System. [ 8.483496] systemd[1]: Mounted RPC Pipe File System. [ 8.483876] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.489615] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.491988] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.492518] systemd[1]: Mounted Kernel Debug File System. [ 8.493588] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.493602] nvmap_page_pool_init: Total RAM pages: 1752672 [ 8.498277] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.498538] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.501474] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.501626] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.504629] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.508721] systemd[1]: Mounted Kernel Trace File System. [ 8.515085] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.519943] systemd[1]: nvfb-udev.service: Succeeded. [ 8.524299] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.536884] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.549660] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.551608] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.558598] systemd[1]: Starting Load/Save Random Seed... [ 8.568022] systemd[1]: Starting Create System Users... [ 8.600173] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.600173] [ 8.619589] systemd[1]: Finished Load/Save Random Seed. [ 8.629590] systemd[1]: Finished Load Kernel Modules. [ 8.635034] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.641577] systemd[1]: Mounting Kernel Configuration File System... [ 8.649490] systemd[1]: Started OP-TEE Client Supplicant. [ 8.658273] systemd[1]: Starting Apply Kernel Variables... [ 8.667817] systemd[1]: Finished Create System Users. [ 8.674668] systemd[1]: Finished Set the console keyboard layout. [ 8.680196] systemd[1]: Mounted Kernel Configuration File System. [ 8.688403] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.227099] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.233584] imx219 9-0010: board setup failed [ 10.234944] imx219: probe of 9-0010 failed with error -121 [ 10.243688] hot-surface-alert cooling state: 0 -> 1 [ 10.247971] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.253302] imx219 10-0010: board setup failed [ 10.254851] imx219: probe of 10-0010 failed with error -121 [ 11.117893] using random self ethernet address [ 11.139608] using random host ethernet address [ 11.947815] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.950093] Creating 1 MTD partitions on "spi6.0": [ 11.952294] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.651666] using random self ethernet address [ 12.654272] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.830853] nvidia: loading out-of-tree module taints kernel. [ 58.359453] watchdog: watchdog0: watchdog did not stop! [ 58.851838] Trying to unregister non-registered hwtime source [ 61.907864] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.909358] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.311] I> sdmmc DDR50 mode [0001.329] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.346] W> Cannot find any partition table for 00000003 [0001.347] > PARTITION_MANAGER: Failed to publish partition. [0001.363] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.364] I> Active Boot chain : 0 [0002.035] I> Relocating BR-BCT [0002.036] > DEVICE_PROD: device prod is not initialized. [0002.341] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.342] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.343] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.343] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.344] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.344] I> dram_block larger than 80000000 [0002.347] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.358] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.361] I> found decompressor handler: lz4 [0002.590] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.591] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.211] I> Welcome to NVDisp-Init [0003.211] I> NVDisp-Init version: t194-f9ecfedc [0003.211] I> CPU-BL Params @ 0xca020000 [0003.211] I> 0) Base:0x00000000 Size:0x00000000 [0003.212] I> 1) Base:0xc8300000 Size:0x00100000 [0003.212] I> 2) Base:0xc9800000 Size:0x00200000 [0003.212] I> 3) Base:0xc8600000 Size:0x00200000 [0003.215] I> 4) Base:0xc8200000 Size:0x00100000 [0003.219] I> 5) Base:0xc8100000 Size:0x00100000 [0003.224] I> 6) Base:0xc9400000 Size:0x00400000 [0003.228] I> 7) Base:0xc9000000 Size:0x00400000 [0003.233] I> 8) Base:0xc8000000 Size:0x00100000 [0003.237] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.242] I> 10) Base:0xca800000 Size:0x00800000 [0003.246] I> 11) Base:0x40000000 Size:0x00040000 [0003.251] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.255] I> 13) Base:0x40046000 Size:0x00002000 [0003.260] I> 14) Base:0x40048000 Size:0x00002000 [0003.264] I> 15) Base:0xaf000000 Size:0x00004000 [0003.269] I> 16) Base:0x4004a000 Size:0x00002000 [0003.273] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.277] I> 18) Base:0x4004c000 Size:0x00002000 [0003.282] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.286] I> 20) Base:0x4004e000 Size:0x00002000 [0003.291] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.295] I> 22) Base:0x00000000 Size:0x00000000 [0003.300] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.304] I> 24) Base:0xcc000000 Size:0x02000000 [0003.309] I> 25) Base:0x40050000 Size:0x00002000 [0003.313] I> 26) Base:0x40040000 Size:0x00006000 [0003.318] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.322] I> 28) Base:0xc8400000 Size:0x00200000 [0003.327] I> 29) Base:0xc8800000 Size:0x00400000 [0003.331] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.335] I> 31) Base:0x00000000 Size:0x00000000 [0003.340] I> 32) Base:0xf8000000 Size:0x08000000 [0003.344] I> 33) Base:0xce000000 Size:0x2a000000 [0003.349] I> 34) Base:0xcb000000 Size:0x01000000 [0003.353] I> 35) Base:0xae000000 Size:0x01000000 [0003.358] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.362] I> 37) Base:0xca000000 Size:0x00800000 [0003.367] I> 38) Base:0x80000000 Size:0x20000000 [0003.371] I> 39) Base:0xb0000000 Size:0x08000000 [0003.376] I> 40) Base:0x00000000 Size:0x00000000 [0003.380] I> 41) Base:0x00000000 Size:0x00000000 [0003.385] I> 42) Base:0x00000000 Size:0x00000000 [0003.389] I> 43) Base:0x00000000 Size:0x00000000 [0003.393] I> 44) Base:0x00000000 Size:0x00000000 [0003.398] I> 45) Base:0x00000000 Size:0x00000000 [0003.402] GIC-SPI Target CPU: 0 [0003.405] Interrupts Init done [0003.408] calling constructors [0003.411] initializing heap [0003.414] I> Heap: [0xa0960000 ... 0xadf00000] [0003.418] initializing threads [0003.421] initializing timers [0003.424] creating bootstrap completion thread [0003.428] top of bootstrap2() [0003.431] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.435] initializing platform [0003.438] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.444] W> device prod register failed [0003.448] I> Bl_dtb @0xadf00000 [0003.451] I> gpio framework initialized [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.468] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.473] I> fixed regulator driver initialized [0003.491] I> register 'maxim' power off handle [0003.496] I> virtual i2c enabled [0003.496] I> registered 'maxim,max20024' pmic [0003.496] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.497] I> Boot-device: QSPI [0003.497] I> Boot_device: QSPI_FLASH instance: 0 [0003.499] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.510] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.517] I> QSPI source rate = 204000 Khz [0003.520] I> Requested rate for QSPI clock = 34000 Khz [0003.525] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.530] I> tx_clk_tap_delay : 0 [0003.533] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.544] I> Qspi initialized successfully [0003.545] I> qspi flash-0 params source = boot args [0003.549] W> No board IDs available [0003.552] E> Failed to get board id info! [0003.558] I> sdmmc-3 params source = safe params [0003.565] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.567] W> Cannot find any partition table for 00000003 [0003.571] E> Failed to publish 00000003 [0003.575] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.631] I> edid read success [0003.644] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.644] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.645] I> width = 720, height = 480, frequency = 26973026 [0003.649] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.683] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.743] initializing target [0003.744] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000707] Console: colour dummy device 80x25 [ 0.002174] printk: console [tty0] enabled [ 0.002235] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002271] pid_max: default: 32768 minimum: 301 [ 0.002501] LSM: Security Framework initializing [ 0.002571] Yama: becoming mindful. [ 0.002618] SELinux: Initializing. [ 0.002818] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002858] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005786] rcu: Hierarchical SRCU implementation. [ 0.006082] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006765] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006821] DTB Build time: Aug 10 2022 20:31:49 [ 0.009485] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009751] Remapping and enabling EFI services. [ 0.011821] smp: Bringing up secondary CPUs ... [ 0.042426] Detected PIPT I-cache on CPU1 [ 0.042520] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073594] Detected PIPT I-cache on CPU2 [ 0.073750] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103355] Detected PIPT I-cache on CPU3 [ 0.103499] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133256] Detected PIPT I-cache on CPU4 [ 0.133354] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163232] Detected PIPT I-cache on CPU5 [ 0.163340] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163687] smp: Brought up 1 node, 6 CPUs [ 0.163882] SMP: Total of 6 processors activated. [ 0.163961] CPU features: detected: Privileged Access Never [ 0.164003] CPU features: detected: LSE atomic instructions [ 0.164016] CPU features: detected: User Access Override [ 0.164028] CPU features: detected: 32-bit EL0 Support [ 0.164040] CPU features: detected: RAS Extension Support [ 0.164052] CPU features: detected: CRC32 instructions [ 0.164065] CPU features: detected: 32-bit EL1 Support [ 0.233209] CPU: All CPU(s) started at EL2 [ 0.239805] devtmpfs: initialized [ 0.289449] Registered cp15_barrier emulation handler [ 0.289597] Registered setend emulation handler [ 0.289641] KASLR enabled [ 0.289903] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289930] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291169] pinctrl core: initialized pinctrl subsystem [ 0.292182] SMBIOS 3.0.0 present. [ 0.292211] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292868] NET: Registered protocol family 16 [ 0.294908] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295403] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296090] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296144] audit: initializing netlink subsys (disabled) [ 0.296381] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296807] thermal_sys: Registered thermal governor 'step_wise' [ 0.296813] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296827] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299040] cpuidle: using governor menu [ 0.299645] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300100] ASID allocator initialised with 32768 entries [ 0.300350] Serial: AMBA PL011 UART driver [ 0.303806] Tegra reboot handler registered. [ 0.374660] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.374822] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.375008] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.375085] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.375260] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.375333] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.375461] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.375503] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.375628] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.375671] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.377763] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.377796] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.377825] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.377853] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.377885] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.377913] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.377950] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.377983] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.378008] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.378032] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.378058] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.378082] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.378152] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.378179] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.378221] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.378259] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.378285] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.378371] mc-err: mcerr ops are set to t19x [ 0.390245] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390290] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390304] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390317] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.398028] ACPI: Interpreter disabled. [ 0.399671] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.401482] iommu: Default domain type: Translated [ 0.401565] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.402149] SCSI subsystem initialized [ 0.402368] usbcore: registered new interface driver usbfs [ 0.402432] usbcore: registered new interface driver hub [ 0.402490] usbcore: registered new device driver usb [ 0.402999] mc: Linux media interface: v0.10 [ 0.403044] videodev: Linux video capture interface: v2.00 [ 0.403477] pps_core: LinuxPPS API ver. 1 registered [ 0.403499] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403532] PTP clock support registered [ 0.403799] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404354] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.404449] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.405394] Registered efivars operations [ 0.413182] FPGA manager framework [ 0.413333] Advanced Linux Sound Architecture Driver Initialized. [ 0.414121] Bluetooth: Core ver 2.22 [ 0.414174] NET: Registered protocol family 31 [ 0.414192] Bluetooth: HCI device and connection manager initialized [ 0.414213] Bluetooth: HCI socket layer initialized [ 0.414232] Bluetooth: L2CAP socket layer initialized [ 0.414261] Bluetooth: SCO socket layer initialized [ 0.416603] camchar: rtcpu character device driver loaded [ 0.417628] clocksource: Switched to clocksource arch_sys_counter [ 0.837519] VFS: Disk quotas dquot_6.6.0 [ 0.837650] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.838176] pnp: PnP ACPI: disabled [ 0.852613] la/ptsa driver initialized. [ 0.852795] NET: Registered protocol family 2 [ 0.853057] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.860741] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.860839] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.861197] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.861891] TCP: Hash tables configured (established 65536 bind 65536) [ 0.862092] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.862246] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.862516] NET: Registered protocol family 1 [ 0.863456] RPC: Registered named UNIX socket transport module. [ 0.863489] RPC: Registered udp transport module. [ 0.863507] RPC: Registered tcp transport module. [ 0.863525] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.863575] PCI: CLS 0 bytes, default 64 [ 0.863991] Trying to unpack rootfs image as initramfs... [ 1.127542] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.130457] Freeing initrd memory: 8196K [ 1.134880] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.134910] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.134940] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.135255] kvm [1]: IPA Size Limit: 40 bits [ 1.135724] kvm [1]: vgic interrupt IRQ9 [ 1.136319] kvm [1]: VHE mode initialized successfully [ 1.137569] Initialise system trusted keyrings [ 1.137903] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.142146] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.142773] NFS: Registering the id_resolver key type [ 1.142800] Key type id_resolver registered [ 1.142810] Key type id_legacy registered [ 1.142887] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.142925] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.142956] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.150948] NET: Registered protocol family 38 [ 1.150969] Key type asymmetric registered [ 1.150980] Asymmetric key parser 'x509' registered [ 1.151033] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.151216] io scheduler mq-deadline registered [ 1.151229] io scheduler kyber registered [ 1.155733] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.157674] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.157731] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.157780] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.157856] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.157929] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.161645] scrncapt: init (heads:4 wins:6 planes:4) [ 1.161957] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.162528] EINJ: ACPI disabled. [ 1.164763] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.164786] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.164796] tegra-pmc: ### PMC reset level: L1 [ 1.164805] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.164842] tegra-pmc: PMC Prod config success [ 1.168570] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.652066] random: fast init done [ 2.719301] printk: console [ttyTCU0] enabled [ 2.725037] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.729959] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.734290] arm-smmu 10000000.iommu: stage 1 translation [ 2.739863] arm-smmu 10000000.iommu: stage 2 translation [ 2.745261] arm-smmu 10000000.iommu: nested translation [ 2.750879] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.757775] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.766901] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.770901] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.777464] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.784907] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.790514] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.795225] arm-smmu 12000000.iommu: stage 1 translation [ 2.801009] arm-smmu 12000000.iommu: stage 2 translation [ 2.806176] arm-smmu 12000000.iommu: nested translation [ 2.811605] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.819023] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.827872] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.831899] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.838705] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.845974] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.855316] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.859174] tegra_profiler: auth: init [ 2.863079] THERMAL EST: found 3 subdevs [ 2.866806] THERMAL EST num_resources: 0 [ 2.870661] [THERMAL EST subdev 0] [ 2.873727] [THERMAL EST subdev 1] [ 2.877367] [THERMAL EST subdev 2] [ 2.880364] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.887024] THERMAL EST: thz register success. [ 2.891326] THERMAL EST: end of probe, return err: 0 [ 2.896561] nvsciipc: loaded module [ 2.902497] tun: Universal TUN/TAP device driver, 1.6 [ 2.905870] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.912123] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.917927] e1000e: Intel(R) PRO/1000 Network Driver [ 2.922879] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.928964] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.934000] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.940032] PPP generic driver version 2.4.2 [ 2.944676] PPP BSD Compression module registered [ 2.948967] PPP Deflate Compression module registered [ 2.954491] PPP MPPE Compression module registered [ 2.959510] usbcore: registered new interface driver r8152 [ 2.964992] usbcore: registered new interface driver asix [ 2.970341] usbcore: registered new interface driver ax88179_178a [ 2.976214] usbcore: registered new interface driver cdc_ether [ 2.982138] usbcore: registered new interface driver net1080 [ 2.987740] usbcore: registered new interface driver cdc_subset [ 2.994035] usbcore: registered new interface driver zaurus [ 2.999479] usbcore: registered new interface driver cdc_ncm [ 3.005153] usbcore: registered new interface driver aqc111 [ 3.011012] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.017128] ohci-pci: OHCI PCI platform driver [ 3.021164] ohci-platform: OHCI generic platform driver [ 3.027097] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.033069] usbcore: registered new interface driver uas [ 3.037721] usbcore: registered new interface driver usb-storage [ 3.043774] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.049364] mousedev: PS/2 mouse device common for all mice [ 3.054620] usbcore: registered new interface driver xpad [ 3.062336] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.065377] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.073172] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.079548] i2c /dev entries driver [ 3.083244] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.088976] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.094086] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.099466] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.105045] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.110323] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.116033] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.127224] device-mapper: uevent: version 1.0.3 [ 3.127573] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.136004] cpuidle: Initializing cpuidle driver [ 3.140137] sdhci: Secure Digital Host Controller Interface driver [ 3.144977] sdhci: Copyright(c) Pierre Ossman [ 3.149335] Synopsys Designware Multimedia Card Interface Driver [ 3.155477] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.161489] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.162067] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.174611] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.192272] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.201058] vdd-1v0: supplied by regulator-dummy [ 3.206329] vdd-1v8-hs: supplied by regulator-dummy [ 3.210913] vdd-1v8-ls: supplied by regulator-dummy [ 3.215524] vdd-1v8-ao: supplied by regulator-dummy [ 3.219202] vddio-ddr-1v1: supplied by regulator-dummy [ 3.223442] vdd-rtc: supplied by regulator-dummy [ 3.224992] spmic-ldo1: supplied by regulator-dummy [ 3.226202] vdd-ao-3v3: supplied by regulator-dummy [ 3.232197] vddio-emmc-3v3: supplied by regulator-dummy [ 3.238258] spmic-ldo4: supplied by regulator-dummy [ 3.239503] vdd-usb-3v3: supplied by regulator-dummy [ 3.245993] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.251991] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.257344] spmic-ldo8: supplied by vdd-1v8-ls [ 3.258665] gpio-510 (gpio_default): hogged as output/high [ 3.261475] gpio-511 (gpio_default): hogged as output/high [ 3.268295] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.406357] max77686-rtc max77620-rtc: registered as rtc0 [ 3.407301] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.407593] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.093120] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.094010] hid: raw HID events driver (C) Jiri Kosina [ 4.094659] usbcore: registered new interface driver usbhid [ 4.094800] usbhid: USB HID core driver [ 4.096356] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.097393] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.914624] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.990611] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.797 ms) ÿá[ 4.183135] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.183686] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.184744] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.185395] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.187027] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.187605] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.188147] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.189370] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.189780] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.191448] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.199191] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.205501] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.210670] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.216752] denver_knobs_init:MTS_VERSION:55637613 [ 4.229264] t19x_cache tegra-cache: probed [ 4.231684] optee: probing for conduit method. [ 4.232553] optee: revision 3.16 (65cc2218) [ 4.233752] optee: dynamic shared memory is enabled [ 4.238132] optee: initialized driver [ 4.244160] nvpmodel: initialized successfully [ 4.245514] tegra_hv: get_hvd: not initialized yet [ 4.250293] user_ivc_mempool: hypervisor not present [ 4.256209] usbcore: registered new interface driver snd-usb-audio [ 4.262699] u32 classifier [ 4.264017] input device check on [ 4.267776] Actions configured [ 4.271384] Initializing XFRM netlink socket [ 4.276342] NET: Registered protocol family 10 [ 4.282648] Segment Routing with IPv6 [ 4.283813] NET: Registered protocol family 17 [ 4.288191] NET: Registered protocol family 15 [ 4.292281] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.306094] Bluetooth: RFCOMM socket layer initialized [ 4.310539] Bluetooth: RFCOMM ver 1.11 [ 4.314729] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.320286] Bluetooth: HIDP socket layer initialized [ 4.326334] 9pnet: Installing 9P2000 support [ 4.329972] Key type dns_resolver registered [ 4.335380] registered taskstats version 1 [ 4.338411] Loading compiled-in X.509 certificates [ 4.350214] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.354206] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.363584] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.366380] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.374635] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.383016] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.497682] tegra194-pcie 14160000.pcie: Link up [ 4.500540] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.500759] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.500904] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.501132] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.501344] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.501797] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.502207] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.511097] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.511531] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.512025] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.513452] pci 0004:01:00.0: supports D1 D2 [ 4.513606] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.521350] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.521843] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.522090] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.522455] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.522702] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.526382] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.532492] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.539868] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.548147] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.558691] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.563149] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.568701] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.575168] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.585248] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.586461] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.594830] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.603050] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.718657] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.719280] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.719605] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.719765] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.720029] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.720310] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.720669] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.721094] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.739445] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.739684] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.741317] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.742836] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.744378] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.745850] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.746914] pci 0005:00:00.0: Removing from iommu group 7 [ 5.747223] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.780320] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.799754] host1x 13e10000.host1x: initialized [ 5.801194] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.802133] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.803211] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.803945] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.804919] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.805538] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.806622] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.807213] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.812111] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.818859] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.828799] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.835583] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.845906] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.852539] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.862496] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.869521] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.879614] falcon 15340000.vic: Adding to iommu group 17 [ 5.893801] falcon 15340000.vic: initialized [ 5.894776] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.899833] falcon 15380000.nvjpg: initialized [ 5.900410] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.912020] falcon 154c0000.nvenc: initialized [ 5.912603] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.922178] falcon 15a80000.nvenc1: initialized [ 5.922768] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.935044] nvdec 15480000.nvdec: initialized [ 5.935551] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.944954] nvdec 15140000.nvdec1: initialized [ 5.945465] tsec 15500000.tsec: Adding to iommu group 18 [ 5.950559] tsec 15500000.tsec: initialized [ 5.951004] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.959530] tsec 15100000.tsecb: initialized [ 5.962877] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.989861] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.001823] gpio-374 (wifi-enable): hogged as output/high [ 6.002139] gpio-431 (camera-control-output-low): hogged as output/low [ 6.002413] gpio-432 (camera-control-output-low): hogged as output/low [ 6.004078] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.005941] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.006514] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.010552] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.015912] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.021851] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.027792] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.036042] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.043375] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.054693] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.060095] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.065739] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.074530] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.083705] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.090870] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.098676] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.105113] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.114650] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.120910] pva 16000000.pva0: Adding to iommu group 22 [ 6.146884] pva 16000000.pva0: initialized [ 6.151631] pva 16800000.pva1: Adding to iommu group 23 [ 6.162387] pva 16800000.pva1: initialized [ 6.166234] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.186029] nvdla 15880000.nvdla0: initialized [ 6.187272] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.195830] nvdla 158c0000.nvdla1: initialized [ 6.197810] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.198108] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.198718] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.198757] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.199380] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.199733] tegradccommon 15200000.display-hub: dma mapping done [ 6.199829] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.204453] tegra_cec 3960000.tegra_cec: probed [ 6.210380] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.210836] tegradc 15200000.display: Adding to iommu group 26 [ 6.211450] tegradc 15210000.display: Adding to iommu group 26 [ 6.214876] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.219981] tegradc 15210000.display: disp0 connected to head1->sor [ 6.220096] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.220227] tegradc 15210000.display: DT parsed successfully [ 6.220247] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.221542] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.227914] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.232778] generic_infoframe_type: 0x87 [ 6.238852] kfuse 3830000.kfuse: initialized [ 6.245838] tegradc 15200000.display: DT parsed successfully [ 6.251990] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.259276] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.266033] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.300853] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.308218] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.315730] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.315736] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.330266] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.338937] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.344266] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.359323] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.360358] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.376193] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.385047] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.385876] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.398016] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.398503] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.425033] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.425411] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.428710] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.436809] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.445419] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.451981] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.459853] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.467165] usb usb1: Product: xHCI Host Controller [ 6.471670] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.477989] usb usb1: SerialNumber: 3610000.xhci [ 6.483354] hub 1-0:1.0: USB hub found [ 6.486569] hub 1-0:1.0: 4 ports detected [ 6.491091] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.496018] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.503813] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.511591] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.519107] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.526367] usb usb2: Product: xHCI Host Controller [ 6.531606] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.537825] usb usb2: SerialNumber: 3610000.xhci [ 6.542876] hub 2-0:1.0: USB hub found [ 6.546328] hub 2-0:1.0: 4 ports detected [ 6.585194] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.590791] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.591961] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.592203] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.605107] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1903000 KHz, changing to: 1907200 KHz [ 6.606144] tegra194-cpufreq ccplex: probed with BWMGR [ 6.607229] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.607926] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.608419] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.609693] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.620206] tegra194-vi5 15c10000.vi: initialized [ 6.621675] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.621681] mmc0: CQHCI version 5.10 [ 6.622703] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.626448] generic_infoframe_type: 0x87 [ 6.626480] tegradc 15200000.display: DT parsed successfully [ 6.630066] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.636093] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.640288] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.646711] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.653934] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.661860] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.661864] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.699797] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.700769] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.705887] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.712115] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.714483] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.725717] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.732670] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.739126] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.749654] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.750691] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.750696] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.753100] tegradc 15200000.display: probed [ 6.756717] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.758259] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.797701] nvethernet 2490000.ethernet: Macsec not supported [ 6.801374] mmc0: Command Queue Engine enabled [ 6.804813] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.807375] mmc0: periodic cache flush enabled [ 6.807392] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.807897] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.816489] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.820314] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.826631] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.842490] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.844625] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.866235] Console: switching to colour frame buffer device 240x67 [ 6.867342] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.872148] tegradc 15200000.display: fb registered [ 6.872227] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.880251] tegra-se-nvhost 15810000.se: initialized [ 6.894561] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.899250] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.900168] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.906503] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.919274] tegra-se-nvhost 15820000.se: initialized [ 6.925655] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.930343] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.933492] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.936469] tegra-se-nvhost 15830000.se: initialized [ 6.944144] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.944154] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.959407] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.960938] usb 1-2: Manufacturer: Generic [ 6.968071] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.973842] hub 1-2:1.0: USB hub found [ 6.978582] tegra-se-nvhost 15840000.se: initialized [ 6.979571] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.980738] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.980746] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.981349] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.981353] Extcon AUX1(HDMI) enable [ 6.981512] tegradc 15210000.display: disp1 connected to head1->sor [ 6.981732] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.981816] tegradc 15210000.display: DT parsed successfully [ 6.983073] hub 1-2:1.0: 4 ports detected [ 6.988310] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.995554] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.004182] tegra_actmon d230000.actmon: in actmon_register()... [ 7.010579] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.018259] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.021744] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.028613] tegradc 15210000.display: probed [ 7.035336] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.054550] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.059559] hvc_sysfs: hypervisor is not present [ 7.099296] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.115730] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.115735] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.115739] usb 2-3: Manufacturer: Generic [ 7.126646] hub 2-3:1.0: USB hub found [ 7.127453] tegradc 15210000.display: fb registered [ 7.130636] ALSA device list: [ 7.130642] No soundcards found. [ 7.133592] hub 2-3:1.0: 4 ports detected [ 7.139138] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.158249] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.158259] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.171682] tegradc 15200000.display: blank - powerdown [ 7.213278] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.213282] Extcon AUX1(HDMI) disable [ 7.217669] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.236957] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.237834] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.249172] tegradc 15200000.display: unblank [ 7.250290] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.250488] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.256245] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.258142] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.262155] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.262158] Extcon AUX1(HDMI) enable [ 7.269686] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.274909] tegradc 15200000.display: sync windows ret = 247 [ 7.300967] tegradc 15210000.display: blank - powerdown [ 7.302339] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.302343] Extcon DP: HPD disabled [ 7.302347] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.302376] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.302382] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.312864] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.313753] Freeing unused kernel memory: 3968K [ 7.320157] Extcon HDMI: HPD enabled [ 7.320170] tegradc 15200000.display: hdmi: plugged [ 7.324840] Run /init as init process [ 7.334236] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.343460] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.370896] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.372340] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.373745] usb 1-3: Product: Bluetooth Radio [ 7.375090] usb 1-3: Manufacturer: Realtek [ 7.376380] usb 1-3: SerialNumber: 00e04c000001 [ 7.395841] Root device found: mmcblk0p1 [ 7.399340] Found dev node: /dev/mmcblk0p1 [ 7.435548] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.440859] Rootfs mounted over mmcblk0p1 [ 7.476388] Switching from initrd to actual rootfs [ 7.624521] systemd[1]: System time before build time, advancing clock. [ 7.692634] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.697501] systemd[1]: Detected architecture arm64. [ 7.738363] systemd[1]: Set hostname to . [ 7.898249] systemd-sysv-generator[259]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.247190] random: systemd: uninitialized urandom read (16 bytes read) [ 8.248900] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.250563] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.256148] systemd[1]: Created slice system-modprobe.slice. [ 8.259724] random: systemd: uninitialized urandom read (16 bytes read) [ 8.262357] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.265442] random: systemd: uninitialized urandom read (16 bytes read) [ 8.268043] systemd[1]: Created slice User and Session Slice. [ 8.271519] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.275634] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.279148] systemd[1]: Reached target User and Group Name Lookups. [ 8.282341] systemd[1]: Reached target Slices. [ 8.285374] systemd[1]: Reached target Swap. [ 8.289282] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.292904] systemd[1]: Listening on Syslog Socket. [ 8.296510] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.299905] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.304103] systemd[1]: Listening on Journal Audit Socket. [ 8.307732] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.311464] systemd[1]: Listening on Journal Socket. [ 8.315170] systemd[1]: Listening on udev Control Socket. [ 8.318682] systemd[1]: Listening on udev Kernel Socket. [ 8.326750] systemd[1]: Mounting Huge Pages File System... [ 8.334941] systemd[1]: Mounting POSIX Message Queue File System... [ 8.344345] systemd[1]: Mounting RPC Pipe File System... [ 8.353850] systemd[1]: Mounting Kernel Debug File System... [ 8.362289] systemd[1]: Mounting Kernel Trace File System... [ 8.372086] systemd[1]: Starting Journal Service... [ 8.380864] systemd[1]: Starting Set the console keyboard layout... [ 8.389007] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.392678] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.398986] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.407083] systemd[1]: Started Nameserver information manager. [ 8.411933] systemd[1]: Reached target Network (Pre). [ 8.418864] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.420747] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.429642] systemd[1]: Starting Load Kernel Modules... [ 8.438007] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.446273] systemd[1]: Starting udev Coldplug all Devices... [ 8.457290] systemd[1]: Mounted Huge Pages File System. [ 8.461214] systemd[1]: Mounted POSIX Message Queue File System. [ 8.464940] systemd[1]: Mounted RPC Pipe File System. [ 8.467698] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.470615] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.472535] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.473817] systemd[1]: Mounted Kernel Debug File System. [ 8.474091] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.476966] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.476971] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.477265] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.478725] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.489093] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.489104] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.505140] systemd[1]: Mounted Kernel Trace File System. [ 8.514798] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.532982] systemd[1]: nvfb-udev.service: Succeeded. [ 8.537142] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.546969] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.559722] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.561601] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.568073] systemd[1]: Starting Load/Save Random Seed... [ 8.577641] systemd[1]: Starting Create System Users... [ 8.586796] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.586796] [ 8.627928] systemd[1]: Finished Load Kernel Modules. [ 8.632314] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.638882] systemd[1]: Mounting Kernel Configuration File System... [ 8.646877] systemd[1]: Started OP-TEE Client Supplicant. [ 8.655068] systemd[1]: Starting Apply Kernel Variables... [ 8.664962] systemd[1]: Finished Set the console keyboard layout. [ 8.669452] systemd[1]: Mounted Kernel Configuration File System. [ 8.681883] systemd[1]: Finished Create System Users. [ 9.905661] random: crng init done [ 9.906900] random: 7 urandom warning(s) missed due to ratelimiting [ 9.926856] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.935964] imx219 9-0010: board setup failed [ 9.937370] imx219: probe of 9-0010 failed with error -121 [ 9.953110] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.962229] imx219 10-0010: board setup failed [ 9.962324] imx219: probe of 10-0010 failed with error -121 [ 10.022379] hot-surface-alert cooling state: 0 -> 1 [ 10.795172] using random self ethernet address [ 10.796806] using random host ethernet address [ 11.674690] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.676556] Creating 1 MTD partitions on "spi6.0": [ 11.679046] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.252170] using random self ethernet address [ 12.252176] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.878838] nvidia: loading out-of-tree module taints kernel. [ 59.419576] watchdog: watchdog0: watchdog did not stop! [ 59.907031] Trying to unregister non-registered hwtime source [ 62.968380] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.969949] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [Eÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.645] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.647] I> width = 720, height = 480, frequency = 26973026 [0003.651] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.745] calling apps_init() [0003.746] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000673] Console: colour dummy device 80x25 [ 0.002021] printk: console [tty0] enabled [ 0.002080] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002115] pid_max: default: 32768 minimum: 301 [ 0.002347] LSM: Security Framework initializing [ 0.002423] Yama: becoming mindful. [ 0.002497] SELinux: Initializing. [ 0.002670] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002707] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005813] rcu: Hierarchical SRCU implementation. [ 0.006108] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006780] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006828] DTB Build time: Aug 10 2022 20:31:49 [ 0.009494] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009735] Remapping and enabling EFI services. [ 0.011740] smp: Bringing up secondary CPUs ... [ 0.044178] Detected PIPT I-cache on CPU1 [ 0.044285] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.079145] Detected PIPT I-cache on CPU2 [ 0.079296] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.108732] Detected PIPT I-cache on CPU3 [ 0.108832] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.138558] Detected PIPT I-cache on CPU4 [ 0.138672] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.168347] Detected PIPT I-cache on CPU5 [ 0.168495] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.169201] smp: Brought up 1 node, 6 CPUs [ 0.169321] SMP: Total of 6 processors activated. [ 0.169382] CPU features: detected: Privileged Access Never [ 0.169402] CPU features: detected: LSE atomic instructions [ 0.169415] CPU features: detected: User Access Override [ 0.169427] CPU features: detected: 32-bit EL0 Support [ 0.169439] CPU features: detected: RAS Extension Support [ 0.169450] CPU features: detected: CRC32 instructions [ 0.169462] CPU features: detected: 32-bit EL1 Support [ 0.240493] CPU: All CPU(s) started at EL2 [ 0.246276] devtmpfs: initialized [ 0.294589] Registered cp15_barrier emulation handler [ 0.294718] Registered setend emulation handler [ 0.294743] KASLR enabled [ 0.294994] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.295022] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.296391] pinctrl core: initialized pinctrl subsystem [ 0.297321] SMBIOS 3.0.0 present. [ 0.297351] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.297975] NET: Registered protocol family 16 [ 0.299898] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.300396] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.301101] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.301161] audit: initializing netlink subsys (disabled) [ 0.301436] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.301898] thermal_sys: Registered thermal governor 'step_wise' [ 0.301904] thermal_sys: Registered thermal governor 'power_allocator' [ 0.301922] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.304102] cpuidle: using governor menu [ 0.304354] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.304735] ASID allocator initialised with 32768 entries [ 0.304947] Serial: AMBA PL011 UART driver [ 0.308149] Tegra reboot handler registered. [ 0.382875] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.383009] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.383198] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.383244] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.383362] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.383406] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.383535] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.383593] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.383733] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.383777] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.385968] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.386005] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.386035] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.386079] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.386111] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.386155] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.386197] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.386244] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.386270] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.386295] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.386319] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.386344] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.386368] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.386392] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.386417] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.386441] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.386465] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.386555] mc-err: mcerr ops are set to t19x [ 0.398901] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.398921] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.398934] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.398946] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.405754] ACPI: Interpreter disabled. [ 0.407037] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.408324] iommu: Default domain type: Translated [ 0.408392] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.408764] SCSI subsystem initialized [ 0.408919] usbcore: registered new interface driver usbfs [ 0.408972] usbcore: registered new interface driver hub [ 0.409008] usbcore: registered new device driver usb [ 0.409406] mc: Linux media interface: v0.10 [ 0.409438] videodev: Linux video capture interface: v2.00 [ 0.409729] pps_core: LinuxPPS API ver. 1 registered [ 0.409740] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.409760] PTP clock support registered [ 0.409967] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.410312] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.410401] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.410947] Registered efivars operations [ 0.416721] FPGA manager framework [ 0.416852] Advanced Linux Sound Architecture Driver Initialized. [ 0.417438] Bluetooth: Core ver 2.22 [ 0.417480] NET: Registered protocol family 31 [ 0.417492] Bluetooth: HCI device and connection manager initialized [ 0.417506] Bluetooth: HCI socket layer initialized [ 0.417521] Bluetooth: L2CAP socket layer initialized [ 0.417542] Bluetooth: SCO socket layer initialized [ 0.419474] camchar: rtcpu character device driver loaded [ 0.420211] clocksource: Switched to clocksource arch_sys_counter [ 0.846003] VFS: Disk quotas dquot_6.6.0 [ 0.846152] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.846554] pnp: PnP ACPI: disabled [ 0.862825] la/ptsa driver initialized. [ 0.862970] NET: Registered protocol family 2 [ 0.863215] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.872492] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.872614] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.872967] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.873600] TCP: Hash tables configured (established 65536 bind 65536) [ 0.873746] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.873938] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.874191] NET: Registered protocol family 1 [ 0.874920] RPC: Registered named UNIX socket transport module. [ 0.874949] RPC: Registered udp transport module. [ 0.874963] RPC: Registered tcp transport module. [ 0.874977] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.874999] PCI: CLS 0 bytes, default 64 [ 0.875272] Trying to unpack rootfs image as initramfs... [ 1.147112] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.150289] Freeing initrd memory: 8196K [ 1.155288] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.155327] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.155374] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.155807] kvm [1]: IPA Size Limit: 40 bits [ 1.156461] kvm [1]: vgic interrupt IRQ9 [ 1.157049] kvm [1]: VHE mode initialized successfully [ 1.158824] Initialise system trusted keyrings [ 1.159194] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.165870] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.166797] NFS: Registering the id_resolver key type [ 1.166837] Key type id_resolver registered [ 1.166851] Key type id_legacy registered [ 1.166969] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.166994] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.167066] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.177089] NET: Registered protocol family 38 [ 1.177114] Key type asymmetric registered [ 1.177129] Asymmetric key parser 'x509' registered [ 1.177181] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.177486] io scheduler mq-deadline registered [ 1.177529] io scheduler kyber registered [ 1.184292] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.187780] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.187861] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.187933] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.188003] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.188074] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.194483] scrncapt: init (heads:4 wins:6 planes:4) [ 1.194497] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.195903] EINJ: ACPI disabled. [ 1.199617] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.199644] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.199658] tegra-pmc: ### PMC reset level: L1 [ 1.199672] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.199723] tegra-pmc: PMC Prod config success [ 1.205593] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.242150] random: fast init done [ 1.245378] printk: console [ttyTCU0] enabled [ 2.763787] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.767896] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.772679] arm-smmu 10000000.iommu: stage 1 translation [ 2.777959] arm-smmu 10000000.iommu: stage 2 translation [ 2.783661] arm-smmu 10000000.iommu: nested translation [ 2.789008] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.796312] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.807980] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.809041] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.815596] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.823643] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.828940] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.833651] arm-smmu 12000000.iommu: stage 1 translation [ 2.838869] arm-smmu 12000000.iommu: stage 2 translation [ 2.844552] arm-smmu 12000000.iommu: nested translation [ 2.849721] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.856921] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.868625] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.869999] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.876586] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.884016] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.894250] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.897055] tegra_profiler: auth: init [ 2.901722] THERMAL EST: found 3 subdevs [ 2.904940] THERMAL EST num_resources: 0 [ 2.908523] [THERMAL EST subdev 0] [ 2.912084] [THERMAL EST subdev 1] [ 2.915518] [THERMAL EST subdev 2] [ 2.918519] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.924944] THERMAL EST: thz register success. [ 2.929200] THERMAL EST: end of probe, return err: 0 [ 2.934925] nvsciipc: loaded module [ 2.941732] tun: Universal TUN/TAP device driver, 1.6 [ 2.944011] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.950526] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.955844] e1000e: Intel(R) PRO/1000 Network Driver [ 2.961013] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.966851] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.972389] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.978721] PPP generic driver version 2.4.2 [ 2.982628] PPP BSD Compression module registered [ 2.987115] PPP Deflate Compression module registered [ 2.992386] PPP MPPE Compression module registered [ 2.997632] usbcore: registered new interface driver r8152 [ 3.002878] usbcore: registered new interface driver asix [ 3.008497] usbcore: registered new interface driver ax88179_178a [ 3.014332] usbcore: registered new interface driver cdc_ether [ 3.020566] usbcore: registered new interface driver net1080 [ 3.026143] usbcore: registered new interface driver cdc_subset [ 3.031922] usbcore: registered new interface driver zaurus [ 3.037657] usbcore: registered new interface driver cdc_ncm [ 3.043553] usbcore: registered new interface driver aqc111 [ 3.049213] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.055022] ohci-pci: OHCI PCI platform driver [ 3.059338] ohci-platform: OHCI generic platform driver [ 3.065757] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.071917] usbcore: registered new interface driver uas [ 3.075635] usbcore: registered new interface driver usb-storage [ 3.082054] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.087851] mousedev: PS/2 mouse device common for all mice [ 3.093047] usbcore: registered new interface driver xpad [ 3.100854] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.103480] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.111308] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.118136] i2c /dev entries driver [ 3.121461] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.127304] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.132489] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.137983] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.143256] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.148547] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.153997] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.167716] device-mapper: uevent: version 1.0.3 [ 3.168168] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.174959] cpuidle: Initializing cpuidle driver [ 3.178685] sdhci: Secure Digital Host Controller Interface driver [ 3.183372] sdhci: Copyright(c) Pierre Ossman [ 3.187210] Synopsys Designware Multimedia Card Interface Driver [ 3.193654] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.199634] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.200399] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.212896] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.235483] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.245479] vdd-1v0: supplied by regulator-dummy [ 3.251069] vdd-1v8-hs: supplied by regulator-dummy [ 3.255936] vdd-1v8-ls: supplied by regulator-dummy [ 3.260859] vdd-1v8-ao: supplied by regulator-dummy [ 3.264866] vddio-ddr-1v1: supplied by regulator-dummy [ 3.269404] vdd-rtc: supplied by regulator-dummy [ 3.271192] spmic-ldo1: supplied by regulator-dummy [ 3.272503] vdd-ao-3v3: supplied by regulator-dummy [ 3.278926] vddio-emmc-3v3: supplied by regulator-dummy [ 3.285258] spmic-ldo4: supplied by regulator-dummy [ 3.286643] vdd-usb-3v3: supplied by regulator-dummy [ 3.292974] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.299219] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.304924] spmic-ldo8: supplied by vdd-1v8-ls [ 3.306403] gpio-510 (gpio_default): hogged as output/high [ 3.307823] gpio-511 (gpio_default): hogged as output/high [ 3.310770] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.446959] max77686-rtc max77620-rtc: registered as rtc0 [ 3.448347] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.448703] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.282971] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.284379] hid: raw HID events driver (C) Jiri Kosina [ 4.285286] usbcore: registered new interface driver usbhid [ 4.285470] usbhid: USB HID core driver [ 4.287753] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.289235] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.013891] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.087806] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.723 ms) ÿá[ 4.373147] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.373828] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.374916] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.375626] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.377525] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.378266] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.378892] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.380422] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.380774] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.383624] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.389389] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.396913] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.401641] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.406861] denver_knobs_init:MTS_VERSION:55637613 [ 4.419373] t19x_cache tegra-cache: probed [ 4.422578] optee: probing for conduit method. [ 4.423396] optee: revision 3.16 (65cc2218) [ 4.424455] optee: dynamic shared memory is enabled [ 4.428169] optee: initialized driver [ 4.434260] nvpmodel: initialized successfully [ 4.435661] tegra_hv: get_hvd: not initialized yet [ 4.440449] user_ivc_mempool: hypervisor not present [ 4.446372] usbcore: registered new interface driver snd-usb-audio [ 4.452877] u32 classifier [ 4.454172] input device check on [ 4.457887] Actions configured [ 4.461292] Initializing XFRM netlink socket [ 4.466190] NET: Registered protocol family 10 [ 4.472509] Segment Routing with IPv6 [ 4.473518] NET: Registered protocol family 17 [ 4.478068] NET: Registered protocol family 15 [ 4.482341] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.496100] Bluetooth: RFCOMM socket layer initialized [ 4.500494] Bluetooth: RFCOMM ver 1.11 [ 4.504640] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.510243] Bluetooth: HIDP socket layer initialized [ 4.516596] 9pnet: Installing 9P2000 support [ 4.519643] Key type dns_resolver registered [ 4.525465] registered taskstats version 1 [ 4.528069] Loading compiled-in X.509 certificates [ 4.540890] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.543705] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.554117] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.556353] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.564585] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.573218] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.688312] tegra194-pcie 14160000.pcie: Link up [ 4.691146] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.691454] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.691663] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.691916] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.692104] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.692536] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.692994] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.704521] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.705132] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.705583] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.707141] pci 0004:01:00.0: supports D1 D2 [ 4.707313] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.717497] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.717789] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.718023] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.718536] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.718793] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.718961] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.723220] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.730330] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.738851] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.749548] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.754200] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.759583] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.766256] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.775464] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.776808] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.785475] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.793710] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.909224] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.909831] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.910077] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.910354] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.910608] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.910913] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.911304] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.911754] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.932342] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.932616] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.934231] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.935403] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.936995] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.938449] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.939351] pci 0005:00:00.0: Removing from iommu group 7 [ 5.939669] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.973756] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.998490] host1x 13e10000.host1x: initialized [ 5.999913] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.001075] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.002183] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.002873] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.003819] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.004571] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.005623] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.006361] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.007273] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.009376] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.019141] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.026473] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.036296] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.043024] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.053221] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.060480] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.069939] falcon 15340000.vic: Adding to iommu group 17 [ 6.085256] falcon 15340000.vic: initialized [ 6.086215] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.091758] falcon 15380000.nvjpg: initialized [ 6.092437] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.103160] falcon 154c0000.nvenc: initialized [ 6.103681] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.114153] falcon 15a80000.nvenc1: initialized [ 6.115047] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.125899] nvdec 15480000.nvdec: initialized [ 6.126460] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.137159] nvdec 15140000.nvdec1: initialized [ 6.137729] tsec 15500000.tsec: Adding to iommu group 18 [ 6.143932] tsec 15500000.tsec: initialized [ 6.144612] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.150531] tsec 15100000.tsecb: initialized [ 6.154552] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.182575] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.195447] gpio-374 (wifi-enable): hogged as output/high [ 6.195761] gpio-431 (camera-control-output-low): hogged as output/low [ 6.196004] gpio-432 (camera-control-output-low): hogged as output/low [ 6.197841] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.200158] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.200741] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.202264] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.206674] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.212504] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.217950] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.226674] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.233666] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.245693] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.250314] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.256526] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.265098] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.274421] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.281968] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.289199] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.295389] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.305281] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.311514] pva 16000000.pva0: Adding to iommu group 22 [ 6.338981] pva 16000000.pva0: initialized [ 6.343555] pva 16800000.pva1: Adding to iommu group 23 [ 6.355107] pva 16800000.pva1: initialized [ 6.359222] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.372599] nvdla 15880000.nvdla0: initialized [ 6.373945] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.383158] nvdla 158c0000.nvdla1: initialized [ 6.387357] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.387542] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.387730] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.387738] tegradc 15200000.display: Adding to iommu group 26 [ 6.387992] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.388909] tegradccommon 15200000.display-hub: dma mapping done [ 6.389281] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.395275] tegradc 15210000.display: Adding to iommu group 26 [ 6.395465] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.395759] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.396174] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.396182] tegra_cec 3960000.tegra_cec: probed [ 6.397072] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.399410] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.399751] kfuse 3830000.kfuse: initialized [ 6.400409] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.400416] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.400946] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.401894] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.407765] generic_infoframe_type: 0x87 [ 6.415482] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.419397] tegradc 15200000.display: DT parsed successfully [ 6.424434] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.429591] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.437367] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.445212] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.447886] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.453288] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.453299] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.454073] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.472038] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.472263] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.473319] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.478131] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.478269] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.486600] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.493264] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.501331] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.506580] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.510717] random: crng init done [ 6.517032] tegradc 15210000.display: disp0 connected to head1->sor [ 6.524347] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.531941] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.539962] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.545963] tegradc 15210000.display: DT parsed successfully [ 6.555305] usb usb1: Product: xHCI Host Controller [ 6.561429] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.665606] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.671788] usb usb1: SerialNumber: 3610000.xhci [ 6.677405] hub 1-0:1.0: USB hub found [ 6.680645] hub 1-0:1.0: 4 ports detected [ 6.685256] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.689889] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.697506] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.705371] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.713420] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.720633] usb usb2: Product: xHCI Host Controller [ 6.725470] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.731772] usb usb2: SerialNumber: 3610000.xhci [ 6.737122] hub 2-0:1.0: USB hub found [ 6.739952] hub 2-0:1.0: 4 ports detected [ 6.783125] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.789699] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.791411] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.791619] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.805208] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.806243] tegra194-cpufreq ccplex: probed with BWMGR [ 6.807485] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.807941] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.808399] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.809666] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.816870] tegra194-vi5 15c10000.vi: initialized [ 6.818539] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.819745] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.820158] generic_infoframe_type: 0x87 [ 6.826835] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.830393] tegradc 15200000.display: DT parsed successfully [ 6.831336] mmc0: CQHCI version 5.10 [ 6.838690] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.838717] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.844317] tegradc 15200000.display: Display dc.00000000e491a757 registered with id=0 [ 6.847873] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.855125] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.860312] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.860831] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.868261] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.869067] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.875615] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.875626] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.884010] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.884386] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.892999] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.897840] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.898031] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.913935] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.919279] nvethernet 2490000.ethernet: Macsec not supported [ 6.920605] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.926237] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.935380] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.943116] tegradc 15200000.display: probed [ 6.944268] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.948372] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.974469] mmc0: Command Queue Engine enabled [ 6.978706] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.986309] mmc0: periodic cache flush enabled [ 6.995028] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.999525] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.000230] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.005819] tegra-se-nvhost 15810000.se: initialized [ 7.011041] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.063499] Console: switching to colour frame buffer device 240x67 [ 7.068049] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.069355] tegradc 15200000.display: fb registered [ 7.069441] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.075762] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.093388] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.093835] tegra-se-nvhost 15820000.se: initialized [ 7.104099] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.105478] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.108135] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.123587] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.123762] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.131703] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.138666] tegra-se-nvhost 15830000.se: initialized [ 7.145123] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.145133] usb 1-2: Manufacturer: Generic [ 7.152157] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.157246] hub 1-2:1.0: USB hub found [ 7.159591] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.166311] hub 1-2:1.0: 4 ports detected [ 7.170056] tegra-se-nvhost 15840000.se: initialized [ 7.173783] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.174893] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.174902] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.175514] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.175518] Extcon AUX1(HDMI) enable [ 7.175669] tegradc 15210000.display: disp1 connected to head1->sor [ 7.181390] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.185028] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.195180] tegra_actmon d230000.actmon: in actmon_register()... [ 7.201317] tegradc 15210000.display: DT parsed successfully [ 7.215957] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.219833] tegradc 15210000.display: Display dc.00000000aee4eccf registered with id=1 [ 7.232220] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.239195] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.245663] hvc_sysfs: hypervisor is not present [ 7.250698] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.289466] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.322915] ALSA device list: [ 7.323013] No soundcards found. [ 7.330013] tegradc 15210000.display: probed [ 7.330383] tegradc 15210000.display: fb registered [ 7.333403] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.333616] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.333799] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.333895] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.333925] usb 2-3: Manufacturer: Generic [ 7.340244] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.340254] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.341933] Freeing unused kernel memory: 3968K [ 7.355385] hub 2-3:1.0: USB hub found [ 7.364312] Run /init as init process [ 7.367763] hub 2-3:1.0: 4 ports detected [ 7.373616] tegradc 15210000.display: blank - powerdown ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.378583] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.378587] Extcon DP: HPD disabled [ 7.378591] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.378623] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.378630] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.378740] tegradc 15200000.display: blank - powerdown [ 7.400263] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.424248] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.424253] Extcon AUX1(HDMI) disable [ 7.447534] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.448390] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.452276] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.460001] tegradc 15200000.display: unblank [ 7.461086] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.461278] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.464836] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.464851] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.467177] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.469080] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.473071] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.473076] Extcon AUX1(HDMI) enable [ 7.485844] tegradc 15200000.display: sync windows ret = 247 [ 7.530451] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.537616] Extcon HDMI: HPD enabled [ 7.541195] tegradc 15200000.display: hdmi: plugged [ 7.581573] Root device found: mmcblk0p1 [ 7.584978] Found dev node: /dev/mmcblk0p1 [ 7.605432] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.606808] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.608136] usb 1-3: Product: Bluetooth Radio [ 7.609412] usb 1-3: Manufacturer: Realtek [ 7.610656] usb 1-3: SerialNumber: 00e04c000001 [ 7.620950] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.626273] Rootfs mounted over mmcblk0p1 [ 7.662828] Switching from initrd to actual rootfs [ 7.812926] systemd[1]: System time before build time, advancing clock. [ 7.882577] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.887324] systemd[1]: Detected architecture arm64. [ 7.926390] systemd[1]: Set hostname to . [ 8.095168] systemd-sysv-generator[244]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.439806] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.441500] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.447068] systemd[1]: Created slice system-modprobe.slice. [ 8.451760] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.455772] systemd[1]: Created slice User and Session Slice. [ 8.459132] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.463145] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.466607] systemd[1]: Reached target User and Group Name Lookups. [ 8.469785] systemd[1]: Reached target Slices. [ 8.472762] systemd[1]: Reached target Swap. [ 8.476611] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.480100] systemd[1]: Listening on Syslog Socket. [ 8.483479] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.486791] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.490820] systemd[1]: Listening on Journal Audit Socket. [ 8.494245] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.498217] systemd[1]: Listening on Journal Socket. [ 8.503460] systemd[1]: Listening on udev Control Socket. [ 8.508517] systemd[1]: Listening on udev Kernel Socket. [ 8.519248] systemd[1]: Mounting Huge Pages File System... [ 8.530389] systemd[1]: Mounting POSIX Message Queue File System... [ 8.541634] systemd[1]: Mounting RPC Pipe File System... [ 8.549891] systemd[1]: Mounting Kernel Debug File System... [ 8.557864] systemd[1]: Mounting Kernel Trace File System... [ 8.567440] systemd[1]: Starting Journal Service... [ 8.576024] systemd[1]: Starting Set the console keyboard layout... [ 8.583980] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.588929] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.595289] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.605097] systemd[1]: Started Nameserver information manager. [ 8.609337] systemd[1]: Reached target Network (Pre). [ 8.616066] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.617912] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.625900] systemd[1]: Starting Load Kernel Modules... [ 8.633593] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.641112] systemd[1]: Starting udev Coldplug all Devices... [ 8.651326] systemd[1]: Mounted Huge Pages File System. [ 8.655320] systemd[1]: Mounted POSIX Message Queue File System. [ 8.660035] systemd[1]: Mounted RPC Pipe File System. [ 8.661274] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.667503] systemd[1]: Mounted Kernel Debug File System. [ 8.671158] systemd[1]: Mounted Kernel Trace File System. [ 8.673650] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.674518] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.676924] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.676942] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.679696] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.679894] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.680116] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.680425] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.680437] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.685033] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.694620] systemd[1]: nvfb-udev.service: Succeeded. [ 8.699123] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.711395] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.716620] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.718319] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.733129] systemd[1]: Starting Load/Save Random Seed... [ 8.740936] systemd[1]: Starting Create System Users... [ 8.768779] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.768779] [ 8.790361] systemd[1]: Finished Load/Save Random Seed. [ 8.797177] systemd[1]: Finished Load Kernel Modules. [ 8.801967] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.809088] systemd[1]: Mounting Kernel Configuration File System... [ 8.816893] systemd[1]: Started OP-TEE Client Supplicant. [ 8.825091] systemd[1]: Starting Apply Kernel Variables... [ 8.835120] systemd[1]: Finished Create System Users. [ 8.839852] systemd[1]: Mounted Kernel Configuration File System. [ 8.848020] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.854865] systemd[1]: Finished Set the console keyboard layout. [ 10.293840] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.300535] imx219 9-0010: board setup failed [ 10.301808] imx219: probe of 9-0010 failed with error -121 [ 10.313882] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.320597] imx219 10-0010: board setup failed [ 10.321945] imx219: probe of 10-0010 failed with error -121 [ 10.328027] hot-surface-alert cooling state: 0 -> 1 [ 10.905829] using random self ethernet address [ 10.906987] using random host ethernet address [ 11.783380] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.783387] Creating 1 MTD partitions on "spi6.0": [ 11.783395] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.559961] using random self ethernet address [ 12.561096] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.027797] nvidia: loading out-of-tree module taints kernel. [ 59.286223] watchdog: watchdog0: watchdog did not stop! [ 59.769756] Trying to unregister non-registered hwtime source [ 62.827221] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.828829] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.607] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.650] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.750] calling apps_init() [0003.751] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000800] Console: colour dummy device 80x25 [ 0.002322] printk: console [tty0] enabled [ 0.002396] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002432] pid_max: default: 32768 minimum: 301 [ 0.002674] LSM: Security Framework initializing [ 0.002765] Yama: becoming mindful. [ 0.002817] SELinux: Initializing. [ 0.002971] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003037] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006140] rcu: Hierarchical SRCU implementation. [ 0.006401] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007269] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007302] DTB Build time: Aug 10 2022 20:31:49 [ 0.009900] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010154] Remapping and enabling EFI services. [ 0.012414] smp: Bringing up secondary CPUs ... [ 0.043706] Detected PIPT I-cache on CPU1 [ 0.043804] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073348] Detected PIPT I-cache on CPU2 [ 0.073502] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103179] Detected PIPT I-cache on CPU3 [ 0.103270] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133111] Detected PIPT I-cache on CPU4 [ 0.133281] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162957] Detected PIPT I-cache on CPU5 [ 0.163110] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163515] smp: Brought up 1 node, 6 CPUs [ 0.163694] SMP: Total of 6 processors activated. [ 0.163781] CPU features: detected: Privileged Access Never [ 0.163807] CPU features: detected: LSE atomic instructions [ 0.163821] CPU features: detected: User Access Override [ 0.163834] CPU features: detected: 32-bit EL0 Support [ 0.163847] CPU features: detected: RAS Extension Support [ 0.163859] CPU features: detected: CRC32 instructions [ 0.163873] CPU features: detected: 32-bit EL1 Support [ 0.233042] CPU: All CPU(s) started at EL2 [ 0.238698] devtmpfs: initialized [ 0.285950] Registered cp15_barrier emulation handler [ 0.286080] Registered setend emulation handler [ 0.286099] KASLR enabled [ 0.286382] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286408] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287767] pinctrl core: initialized pinctrl subsystem [ 0.288714] SMBIOS 3.0.0 present. [ 0.288758] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289388] NET: Registered protocol family 16 [ 0.291191] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291918] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292810] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292877] audit: initializing netlink subsys (disabled) [ 0.293123] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293577] thermal_sys: Registered thermal governor 'step_wise' [ 0.293584] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293598] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295793] cpuidle: using governor menu [ 0.296067] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296482] ASID allocator initialised with 32768 entries [ 0.296719] Serial: AMBA PL011 UART driver [ 0.299944] Tegra reboot handler registered. [ 0.376773] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.376904] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.377093] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.377141] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.377268] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.377311] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.377431] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.377508] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.377639] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.377682] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379953] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379987] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.380016] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.380044] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.380074] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.380101] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.380137] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.380166] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.380192] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.380237] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.380268] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.380308] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.380338] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.380380] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.380405] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.380429] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.380453] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.380546] mc-err: mcerr ops are set to t19x [ 0.393638] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.393663] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.393676] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.393688] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.400439] ACPI: Interpreter disabled. [ 0.401633] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.402944] iommu: Default domain type: Translated [ 0.403025] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.403397] SCSI subsystem initialized [ 0.403557] usbcore: registered new interface driver usbfs [ 0.403598] usbcore: registered new interface driver hub [ 0.403631] usbcore: registered new device driver usb [ 0.403993] mc: Linux media interface: v0.10 [ 0.404022] videodev: Linux video capture interface: v2.00 [ 0.404342] pps_core: LinuxPPS API ver. 1 registered [ 0.404355] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.404375] PTP clock support registered [ 0.404564] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404906] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.405010] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.405605] Registered efivars operations [ 0.412488] FPGA manager framework [ 0.412597] Advanced Linux Sound Architecture Driver Initialized. [ 0.413262] Bluetooth: Core ver 2.22 [ 0.413302] NET: Registered protocol family 31 [ 0.413330] Bluetooth: HCI device and connection manager initialized [ 0.413346] Bluetooth: HCI socket layer initialized [ 0.413363] Bluetooth: L2CAP socket layer initialized [ 0.413401] Bluetooth: SCO socket layer initialized [ 0.415080] camchar: rtcpu character device driver loaded [ 0.415831] clocksource: Switched to clocksource arch_sys_counter [ 0.709368] VFS: Disk quotas dquot_6.6.0 [ 0.709440] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.709862] pnp: PnP ACPI: disabled [ 0.722566] la/ptsa driver initialized. [ 0.722722] NET: Registered protocol family 2 [ 0.722893] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.728578] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.728730] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.728976] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.729401] TCP: Hash tables configured (established 65536 bind 65536) [ 0.729522] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.729638] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.729824] NET: Registered protocol family 1 [ 0.730409] RPC: Registered named UNIX socket transport module. [ 0.730423] RPC: Registered udp transport module. [ 0.730432] RPC: Registered tcp transport module. [ 0.730441] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.730473] PCI: CLS 0 bytes, default 64 [ 0.730660] Trying to unpack rootfs image as initramfs... [ 0.917362] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.919456] Freeing initrd memory: 8196K [ 0.923088] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.923115] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.923158] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.923433] kvm [1]: IPA Size Limit: 40 bits [ 0.923927] kvm [1]: vgic interrupt IRQ9 [ 0.924456] kvm [1]: VHE mode initialized successfully [ 0.925888] Initialise system trusted keyrings [ 0.926129] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.932144] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.932931] NFS: Registering the id_resolver key type [ 0.932957] Key type id_resolver registered [ 0.932967] Key type id_legacy registered [ 0.933074] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.933093] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.933121] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.943128] NET: Registered protocol family 38 [ 0.943147] Key type asymmetric registered [ 0.943159] Asymmetric key parser 'x509' registered [ 0.943218] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.943438] io scheduler mq-deadline registered [ 0.943452] io scheduler kyber registered [ 0.948198] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.950457] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.950518] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.950591] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.950642] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.950706] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.954948] scrncapt: init (heads:4 wins:6 planes:4) [ 0.955477] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.956113] EINJ: ACPI disabled. [ 0.958574] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.958597] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.958608] tegra-pmc: ### PMC reset level: L1 [ 0.958618] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.958671] tegra-pmc: PMC Prod config success [ 0.963316] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.446752] random: fast init done [ 2.514016] printk: console [ttyTCU0] enabled [ 2.519997] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.524661] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.529445] arm-smmu 10000000.iommu: stage 1 translation [ 2.534702] arm-smmu 10000000.iommu: stage 2 translation [ 2.540209] arm-smmu 10000000.iommu: nested translation [ 2.545555] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.552983] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.563608] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.565878] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.572686] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.580065] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.585725] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.590182] arm-smmu 12000000.iommu: stage 1 translation [ 2.595685] arm-smmu 12000000.iommu: stage 2 translation [ 2.601115] arm-smmu 12000000.iommu: nested translation [ 2.606797] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.613982] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.624577] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.627080] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.633679] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.640823] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.650814] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.654205] tegra_profiler: auth: init [ 2.658152] THERMAL EST: found 3 subdevs [ 2.661754] THERMAL EST num_resources: 0 [ 2.665598] [THERMAL EST subdev 0] [ 2.668915] [THERMAL EST subdev 1] [ 2.672323] [THERMAL EST subdev 2] [ 2.675552] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.682006] THERMAL EST: thz register success. [ 2.686271] THERMAL EST: end of probe, return err: 0 [ 2.691572] nvsciipc: loaded module [ 2.698582] tun: Universal TUN/TAP device driver, 1.6 [ 2.700823] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.707100] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.712677] e1000e: Intel(R) PRO/1000 Network Driver [ 2.717571] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.723649] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.729197] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.735363] PPP generic driver version 2.4.2 [ 2.739418] PPP BSD Compression module registered [ 2.743950] PPP Deflate Compression module registered [ 2.749414] PPP MPPE Compression module registered [ 2.754172] usbcore: registered new interface driver r8152 [ 2.759702] usbcore: registered new interface driver asix [ 2.765020] usbcore: registered new interface driver ax88179_178a [ 2.771152] usbcore: registered new interface driver cdc_ether [ 2.777342] usbcore: registered new interface driver net1080 [ 2.782944] usbcore: registered new interface driver cdc_subset [ 2.788739] usbcore: registered new interface driver zaurus [ 2.794677] usbcore: registered new interface driver cdc_ncm [ 2.800356] usbcore: registered new interface driver aqc111 [ 2.805806] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.811861] ohci-pci: OHCI PCI platform driver [ 2.816392] ohci-platform: OHCI generic platform driver [ 2.822200] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.828289] usbcore: registered new interface driver uas [ 2.832674] usbcore: registered new interface driver usb-storage [ 2.838528] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.844681] mousedev: PS/2 mouse device common for all mice [ 2.849639] usbcore: registered new interface driver xpad [ 2.857752] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.860330] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.868134] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.874659] i2c /dev entries driver [ 2.877987] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.884075] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.889096] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.894498] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.900111] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.905549] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.910755] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.923604] device-mapper: uevent: version 1.0.3 [ 2.924063] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.931279] cpuidle: Initializing cpuidle driver [ 2.935400] sdhci: Secure Digital Host Controller Interface driver [ 2.940184] sdhci: Copyright(c) Pierre Ossman [ 2.944023] Synopsys Designware Multimedia Card Interface Driver [ 2.950456] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.956288] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.956975] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.969340] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.989489] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.998765] vdd-1v0: supplied by regulator-dummy [ 3.004270] vdd-1v8-hs: supplied by regulator-dummy [ 3.009075] vdd-1v8-ls: supplied by regulator-dummy [ 3.013875] vdd-1v8-ao: supplied by regulator-dummy [ 3.017745] vddio-ddr-1v1: supplied by regulator-dummy [ 3.022158] vdd-rtc: supplied by regulator-dummy [ 3.023929] spmic-ldo1: supplied by regulator-dummy [ 3.025113] vdd-ao-3v3: supplied by regulator-dummy [ 3.031277] vddio-emmc-3v3: supplied by regulator-dummy [ 3.037540] spmic-ldo4: supplied by regulator-dummy [ 3.038763] vdd-usb-3v3: supplied by regulator-dummy [ 3.044998] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.051146] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.056673] spmic-ldo8: supplied by vdd-1v8-ls [ 3.058130] gpio-510 (gpio_default): hogged as output/high [ 3.059457] gpio-511 (gpio_default): hogged as output/high [ 3.063359] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.201727] max77686-rtc max77620-rtc: registered as rtc0 [ 3.202736] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.203060] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.935265] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.936421] hid: raw HID events driver (C) Jiri Kosina [ 3.937160] usbcore: registered new interface driver usbhid [ 3.937333] usbhid: USB HID core driver [ 3.939212] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.940553] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.009598] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.084363] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.575 ms) ÿá[ 4.025729] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.026480] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.027684] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.028636] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.030445] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.030988] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.031493] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.032833] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.033247] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.035263] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.041707] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.047802] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.053364] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.060554] denver_knobs_init:MTS_VERSION:55637613 [ 4.072708] t19x_cache tegra-cache: probed [ 4.075779] optee: probing for conduit method. [ 4.076879] optee: revision 3.16 (65cc2218) [ 4.078308] optee: dynamic shared memory is enabled [ 4.080516] optee: initialized driver [ 4.086687] nvpmodel: initialized successfully [ 4.087662] tegra_hv: get_hvd: not initialized yet [ 4.092663] user_ivc_mempool: hypervisor not present [ 4.098870] usbcore: registered new interface driver snd-usb-audio [ 4.105391] u32 classifier [ 4.106360] input device check on [ 4.110213] Actions configured [ 4.113403] Initializing XFRM netlink socket [ 4.118386] NET: Registered protocol family 10 [ 4.125328] Segment Routing with IPv6 [ 4.125971] NET: Registered protocol family 17 [ 4.130131] NET: Registered protocol family 15 [ 4.134432] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.148726] Bluetooth: RFCOMM socket layer initialized [ 4.152966] Bluetooth: RFCOMM ver 1.11 [ 4.156707] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.162665] Bluetooth: HIDP socket layer initialized [ 4.168571] 9pnet: Installing 9P2000 support [ 4.172084] Key type dns_resolver registered [ 4.177394] registered taskstats version 1 [ 4.180656] Loading compiled-in X.509 certificates [ 4.193773] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.196356] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.206995] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.208575] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.217100] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.225394] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.343972] tegra194-pcie 14160000.pcie: Link up [ 4.347057] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.347333] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.347531] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.347776] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.348080] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.348480] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.348925] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.362325] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.362890] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.363352] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.365013] pci 0004:01:00.0: supports D1 D2 [ 4.365199] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.374854] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.375318] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.375572] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.376231] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.376507] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.376687] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.378808] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.386302] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.394744] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.404621] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.409604] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.415204] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.422475] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.430788] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.432767] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.440876] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.449727] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.555984] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.556621] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.556804] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.556928] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.557195] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.557356] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.557733] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.558118] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.573818] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.574123] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.575698] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.577078] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.578792] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.580602] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.581490] pci 0005:00:00.0: Removing from iommu group 7 [ 5.581820] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.616279] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.637950] host1x 13e10000.host1x: initialized [ 5.639714] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.640602] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.641489] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.642107] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.643006] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.643682] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.644872] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.645457] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.649337] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.656238] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.665761] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.672857] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.683054] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.689959] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.699790] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.706808] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.716958] falcon 15340000.vic: Adding to iommu group 17 [ 5.731746] falcon 15340000.vic: initialized [ 5.732859] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.738227] falcon 15380000.nvjpg: initialized [ 5.738847] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.749651] falcon 154c0000.nvenc: initialized [ 5.750225] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.759604] falcon 15a80000.nvenc1: initialized [ 5.760197] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.772107] nvdec 15480000.nvdec: initialized [ 5.772792] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.781760] nvdec 15140000.nvdec1: initialized [ 5.782296] tsec 15500000.tsec: Adding to iommu group 18 [ 5.787554] tsec 15500000.tsec: initialized [ 5.788139] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.797140] tsec 15100000.tsecb: initialized [ 5.801248] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.824462] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.836173] gpio-374 (wifi-enable): hogged as output/high [ 5.836518] gpio-431 (camera-control-output-low): hogged as output/low [ 5.836798] gpio-432 (camera-control-output-low): hogged as output/low [ 5.838562] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.840438] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.841418] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.848505] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.853577] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.859245] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.864929] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.873108] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.880768] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.892616] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.897283] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.903289] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.912153] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.921143] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.928891] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.936217] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.942202] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.952165] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.958114] pva 16000000.pva0: Adding to iommu group 22 [ 5.983394] pva 16000000.pva0: initialized [ 5.989334] pva 16800000.pva1: Adding to iommu group 23 [ 6.000464] pva 16800000.pva1: initialized [ 6.005982] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.018743] nvdla 15880000.nvdla0: initialized [ 6.020294] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.028705] nvdla 158c0000.nvdla1: initialized [ 6.032567] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.032942] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.033715] tegradc 15200000.display: Adding to iommu group 26 [ 6.033736] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.034077] tegradc 15210000.display: Adding to iommu group 26 [ 6.034812] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.035223] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.040168] tegra_cec 3960000.tegra_cec: probed [ 6.046634] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.047257] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.052724] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.056646] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.063763] kfuse 3830000.kfuse: initialized [ 6.070589] tegradccommon 15200000.display-hub: dma mapping done [ 6.075751] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.087229] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.094982] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.100880] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.109961] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.115271] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.124408] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.129965] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.150544] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.150952] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.153448] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.161224] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.169885] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.176635] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.184304] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.191422] usb usb1: Product: xHCI Host Controller [ 6.196398] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.202685] usb usb1: SerialNumber: 3610000.xhci [ 6.208293] hub 1-0:1.0: USB hub found [ 6.211007] hub 1-0:1.0: 4 ports detected [ 6.215664] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.220506] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.228029] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.235680] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.243909] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.251084] usb usb2: Product: xHCI Host Controller [ 6.256075] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.262291] usb usb2: SerialNumber: 3610000.xhci [ 6.267912] hub 2-0:1.0: USB hub found [ 6.270480] hub 2-0:1.0: 4 ports detected [ 6.314942] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.320630] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.321882] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.322106] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.335234] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.336276] tegra194-cpufreq ccplex: probed with BWMGR [ 6.337709] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.338442] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.339010] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.340407] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.348539] tegra194-vi5 15c10000.vi: initialized [ 6.350240] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.350723] generic_infoframe_type: 0x87 [ 6.351795] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.354931] tegradc 15200000.display: DT parsed successfully [ 6.361465] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.366917] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.374850] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.382919] mmc0: CQHCI version 5.10 [ 6.389310] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.390242] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.390247] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.390250] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.390633] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.390640] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.391057] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.392432] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.392437] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.394923] tegradc 15200000.display: probed [ 6.399556] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.399562] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.436283] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.460127] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.462029] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.479866] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.485694] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.487055] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.521698] nvethernet 2490000.ethernet: Macsec not supported [ 6.522033] Console: switching to colour frame buffer device 240x67 [ 6.533486] tegradc 15200000.display: fb registered [ 6.538810] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.545266] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.545889] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.553289] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.558585] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.564134] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.577600] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.585132] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.589199] mmc0: Command Queue Engine enabled [ 6.591941] tegra-se-nvhost 15810000.se: initialized [ 6.594613] mmc0: periodic cache flush enabled [ 6.601017] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.603842] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.610805] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.617552] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.623711] tegra-se-nvhost 15820000.se: initialized [ 6.632813] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.634540] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.641768] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.655735] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.661496] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.662247] tegra-se-nvhost 15830000.se: initialized [ 6.668812] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.682613] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.682731] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.688677] Extcon AUX1(HDMI) enable [ 6.688981] tegradc 15210000.display: disp1 connected to head1->sor [ 6.695359] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.698355] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.705450] tegra-se-nvhost 15840000.se: initialized [ 6.710976] tegradc 15210000.display: DT parsed successfully [ 6.718943] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.720328] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.722118] tegra_actmon d230000.actmon: in actmon_register()... [ 6.722302] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.722639] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.722920] hvc_sysfs: hypervisor is not present [ 6.723297] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.728582] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.749701] ALSA device list: [ 6.749810] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.749837] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.754516] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.756264] tegradc 15210000.display: probed [ 6.762501] No soundcards found. [ 6.808699] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.810637] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.826332] tegradc 15210000.display: fb registered [ 6.826381] usb 1-2: Manufacturer: Generic [ 6.829778] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.829784] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.829791] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.849387] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.855617] hub 1-2:1.0: USB hub found [ 6.863744] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.863749] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.863753] usb 2-3: Manufacturer: Generic [ 6.874370] hub 2-3:1.0: USB hub found [ 6.878119] hub 1-2:1.0: 4 ports detected [ 6.881261] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.896118] tegradc 15200000.display: blank - powerdown [ 6.934974] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.934979] Extcon AUX1(HDMI) disable [ 6.958400] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.959299] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.972396] tegradc 15200000.display: unblank [ 6.973654] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.973843] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.979611] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.981574] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.985589] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.985593] Extcon AUX1(HDMI) enable [ 6.998347] tegradc 15200000.display: sync windows ret = 247 [ 7.011928] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.023124] tegradc 15210000.display: blank - powerdown [ 7.024752] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.024756] Extcon DP: HPD disabled [ 7.024761] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.024794] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.027685] Freeing unused kernel memory: 3968K [ 7.028070] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.034450] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.034519] Run /init as init process [ 7.039885] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.041496] Extcon HDMI: HPD enabled [ 7.051297] tegradc 15200000.display: hdmi: plugged [ 7.104434] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.106083] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.115894] Root device found: mmcblk0p1 [ 7.119336] Found dev node: /dev/mmcblk0p1 [ 7.156038] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.161323] Rootfs mounted over mmcblk0p1 [ 7.169078] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.170686] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.172225] usb 1-3: Product: Bluetooth Radio [ 7.173658] usb 1-3: Manufacturer: Realtek [ 7.175025] usb 1-3: SerialNumber: 00e04c000001 [ 7.194404] Switching from initrd to actual rootfs [ 7.343382] systemd[1]: System time before build time, advancing clock. [ 7.413121] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.418139] systemd[1]: Detected architecture arm64. [ 7.458412] systemd[1]: Set hostname to . [ 7.621179] systemd-sysv-generator[250]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.969044] random: systemd: uninitialized urandom read (16 bytes read) [ 7.970859] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.972627] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.978490] systemd[1]: Created slice system-modprobe.slice. [ 7.982268] random: systemd: uninitialized urandom read (16 bytes read) [ 7.985080] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.988426] random: systemd: uninitialized urandom read (16 bytes read) [ 7.991101] systemd[1]: Created slice User and Session Slice. [ 7.994772] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.999211] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.002749] systemd[1]: Reached target User and Group Name Lookups. [ 8.006138] systemd[1]: Reached target Slices. [ 8.009386] systemd[1]: Reached target Swap. [ 8.013532] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.018890] systemd[1]: Listening on Syslog Socket. [ 8.022612] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.027686] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.032163] systemd[1]: Listening on Journal Audit Socket. [ 8.036091] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.040093] systemd[1]: Listening on Journal Socket. [ 8.043968] systemd[1]: Listening on udev Control Socket. [ 8.047614] systemd[1]: Listening on udev Kernel Socket. [ 8.056067] systemd[1]: Mounting Huge Pages File System... [ 8.064501] systemd[1]: Mounting POSIX Message Queue File System... [ 8.072853] systemd[1]: Mounting RPC Pipe File System... [ 8.081867] systemd[1]: Mounting Kernel Debug File System... [ 8.090605] systemd[1]: Mounting Kernel Trace File System... [ 8.100670] systemd[1]: Starting Journal Service... [ 8.109806] systemd[1]: Starting Set the console keyboard layout... [ 8.118464] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.122112] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.128919] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.137398] systemd[1]: Started Nameserver information manager. [ 8.142004] systemd[1]: Reached target Network (Pre). [ 8.149351] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.151307] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.159757] systemd[1]: Starting Load Kernel Modules... [ 8.167733] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.175933] systemd[1]: Starting udev Coldplug all Devices... [ 8.186468] systemd[1]: Mounted Huge Pages File System. [ 8.191494] systemd[1]: Mounted POSIX Message Queue File System. [ 8.195505] systemd[1]: Mounted RPC Pipe File System. [ 8.196247] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.202671] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.203350] systemd[1]: Mounted Kernel Debug File System. [ 8.205167] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.207281] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.207295] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.207299] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.207555] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.208997] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.214950] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.214962] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.226846] systemd[1]: Mounted Kernel Trace File System. [ 8.236651] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.242855] systemd[1]: nvfb-udev.service: Succeeded. [ 8.248005] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.260268] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.274033] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.276124] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.283765] systemd[1]: Starting Load/Save Random Seed... [ 8.292629] systemd[1]: Starting Create System Users... [ 8.314724] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.314724] [ 8.349189] systemd[1]: Finished Load Kernel Modules. [ 8.355900] systemd[1]: Finished Create System Users. [ 8.360368] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.367135] systemd[1]: Mounting Kernel Configuration File System... [ 8.375092] systemd[1]: Started OP-TEE Client Supplicant. [ 8.385866] systemd[1]: Starting Apply Kernel Variables... [ 8.394895] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.405163] systemd[1]: Finished Set the console keyboard layout. [ 8.412239] systemd[1]: Mounted Kernel Configuration File System. [ 9.823286] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.832916] imx219 9-0010: board setup failed [ 9.834364] imx219: probe of 9-0010 failed with error -121 [ 9.848396] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.871975] imx219 10-0010: board setup failed [ 9.873379] imx219: probe of 10-0010 failed with error -121 [ 9.879892] random: crng init done [ 9.881295] random: 7 urandom warning(s) missed due to ratelimiting [ 9.929514] hot-surface-alert cooling state: 0 -> 1 [ 10.773065] using random self ethernet address [ 10.774309] using random host ethernet address [ 11.253641] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.253647] Creating 1 MTD partitions on "spi6.0": [ 11.253656] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.178172] using random self ethernet address [ 12.179761] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.825158] nvidia: loading out-of-tree module taints kernel. [ 58.433421] watchdog: watchdog0: watchdog did not stop! [ 58.961690] Trying to unregister non-registered hwtime source [ 62.022956] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.024769] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERÒÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.327] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.361] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.035] > DEVICE_PROD: device prod is not initialized. [0002.341] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.342] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.342] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.343] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.343] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.344] I> dram_block larger than 80000000 [0002.346] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.357] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.361] I> found decompressor handler: lz4 [0002.590] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.591] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäalÿâadc initialized ÿä ÿâfmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.210] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.211] I> CPU-BL Params @ 0xca020000 [0003.211] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.212] I> 2) Base:0xc9800000 Size:0x00200000 [0003.212] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.219] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.228] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.237] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.246] I> 11) Base:0x40000000 Size:0x00040000 [0003.250] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.255] I> 13) Base:0x40046000 Size:0x00002000 [0003.259] I> 14) Base:0x40048000 Size:0x00002000 [0003.264] I> 15) Base:0xaf000000 Size:0x00004000 [0003.268] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.277] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.286] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.295] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.304] I> 24) Base:0xcc000000 Size:0x02000000 [0003.308] I> 25) Base:0x40050000 Size:0x00002000 [0003.313] I> 26) Base:0x40040000 Size:0x00006000 [0003.317] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.322] I> 28) Base:0xc8400000 Size:0x00200000 [0003.326] I> 29) Base:0xc8800000 Size:0x00400000 [0003.330] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.335] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.344] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.353] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.362] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.371] I> 39) Base:0xb0000000 Size:0x08000000 [0003.375] I> 40) Base:0x00000000 Size:0x00000000 [0003.380] I> 41) Base:0x00000000 Size:0x00000000 [0003.384] I> 42) Base:0x00000000 Size:0x00000000 [0003.388] I> 43) Base:0x00000000 Size:0x00000000 [0003.393] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.402] GIC-SPI Target CPU: 0 [0003.405] Interrupts Init done [0003.408] calling constructors [0003.411] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.418] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.428] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.435] initializing platform [0003.438] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.447] I> Bl_dtb @0xadf00000 [0003.450] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.473] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.499] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.517] I> QSPI source rate = 204000 Khz [0003.520] I> Requested rate for QSPI clock = 34000 Khz [0003.525] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.530] I> tx_clk_tap_delay : 0 [0003.533] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.544] I> Qspi initialized successfully [0003.544] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.557] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.575] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.606] I> regulator 'vdd-hdmi-5v0' already enabled [0003.606] I> hdmi cable connected [0003.613] W> set volts not configured for 'vdd-1v0' [0003.619] W> set volts not configured for 'vdd-1v8-hs' [0003.620] I> retrieved tmds range from prod_list_hdmi_soc [0003.626] E> invalid display type [0003.627] E> cannot find any other nvdisp nodes [0003.644] I> edid read success [0003.656] I> edid read success [0003.657] I> width = 640, height = 480, frequency = 25174825 [0003.657] I> width = 1920, height = 1080, frequency = 148500000 [0003.658] I> width = 1280, height = 768, frequency = 79500000 [0003.658] I> width = 1360, height = 768, frequency = 85500000 [0003.658] I> width = 720, height = 480, frequency = 26973026 [0003.662] I> width = 720, height = 576, frequency = 26973026 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1280, height = 720, frequency = 74175824 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 1920, height = 1080, frequency = 148351648 [0003.691] I> width = 720, height = 480, frequency = 26973026 [0003.696] I> width = 720, height = 576, frequency = 26973026 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 3840, height = 2160, frequency = 296703296 [0003.725] I> width = 4096, height = 2160, frequency = 296703296 [0003.730] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.742] I> hdmi_enable, starting HDMI initialisation [0003.747] I> hdmi_enable, HDMI initialisation complete [0003.756] initializing target [0003.756] calling apps_init() [0003.757] starting app kernel_boot_app [0003.758] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000652] Console: colour dummy device 80x25 [ 0.002103] printk: console [tty0] enabled [ 0.002162] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002197] pid_max: default: 32768 minimum: 301 [ 0.002357] LSM: Security Framework initializing [ 0.002419] Yama: becoming mindful. [ 0.002464] SELinux: Initializing. [ 0.002605] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002663] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005584] rcu: Hierarchical SRCU implementation. [ 0.005915] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006631] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006685] DTB Build time: Aug 10 2022 20:31:49 [ 0.009402] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009656] Remapping and enabling EFI services. [ 0.011568] smp: Bringing up secondary CPUs ... [ 0.044193] Detected PIPT I-cache on CPU1 [ 0.044268] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.077811] Detected PIPT I-cache on CPU2 [ 0.077962] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.107525] Detected PIPT I-cache on CPU3 [ 0.107665] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.137385] Detected PIPT I-cache on CPU4 [ 0.137523] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.167360] Detected PIPT I-cache on CPU5 [ 0.167490] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.167807] smp: Brought up 1 node, 6 CPUs [ 0.168034] SMP: Total of 6 processors activated. [ 0.168049] CPU features: detected: Privileged Access Never [ 0.168075] CPU features: detected: LSE atomic instructions [ 0.168087] CPU features: detected: User Access Override [ 0.168100] CPU features: detected: 32-bit EL0 Support [ 0.168113] CPU features: detected: RAS Extension Support [ 0.168125] CPU features: detected: CRC32 instructions [ 0.168138] CPU features: detected: 32-bit EL1 Support [ 0.236157] CPU: All CPU(s) started at EL2 [ 0.242486] devtmpfs: initialized [ 0.291412] Registered cp15_barrier emulation handler [ 0.291587] Registered setend emulation handler [ 0.291607] KASLR enabled [ 0.291897] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291920] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293219] pinctrl core: initialized pinctrl subsystem [ 0.294260] SMBIOS 3.0.0 present. [ 0.294294] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294961] NET: Registered protocol family 16 [ 0.296865] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.297374] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.298288] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.298349] audit: initializing netlink subsys (disabled) [ 0.298628] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.299062] thermal_sys: Registered thermal governor 'step_wise' [ 0.299069] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299084] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.301312] cpuidle: using governor menu [ 0.301605] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.301968] ASID allocator initialised with 32768 entries [ 0.302206] Serial: AMBA PL011 UART driver [ 0.305314] Tegra reboot handler registered. [ 0.380459] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.380697] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.380944] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.380997] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.381122] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.381168] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.381282] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.381344] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.381499] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.381544] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.383723] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.383760] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.383789] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.383819] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.383850] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.383900] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.383939] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.383973] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.384000] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.384024] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.384049] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.384074] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.384127] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.384152] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.384181] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.384206] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.384231] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.384323] mc-err: mcerr ops are set to t19x [ 0.397691] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.397717] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.397730] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.397743] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.404736] ACPI: Interpreter disabled. [ 0.405983] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.407359] iommu: Default domain type: Translated [ 0.407438] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.407808] SCSI subsystem initialized [ 0.408038] usbcore: registered new interface driver usbfs [ 0.408087] usbcore: registered new interface driver hub [ 0.408126] usbcore: registered new device driver usb [ 0.408583] mc: Linux media interface: v0.10 [ 0.408620] videodev: Linux video capture interface: v2.00 [ 0.408955] pps_core: LinuxPPS API ver. 1 registered [ 0.408966] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.408988] PTP clock support registered [ 0.409200] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.409593] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.409677] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.410285] Registered efivars operations [ 0.415897] FPGA manager framework [ 0.416080] Advanced Linux Sound Architecture Driver Initialized. [ 0.416694] Bluetooth: Core ver 2.22 [ 0.416734] NET: Registered protocol family 31 [ 0.416745] Bluetooth: HCI device and connection manager initialized [ 0.416760] Bluetooth: HCI socket layer initialized [ 0.416775] Bluetooth: L2CAP socket layer initialized [ 0.416796] Bluetooth: SCO socket layer initialized [ 0.418440] camchar: rtcpu character device driver loaded [ 0.419189] clocksource: Switched to clocksource arch_sys_counter [ 0.749555] VFS: Disk quotas dquot_6.6.0 [ 0.749626] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.750066] pnp: PnP ACPI: disabled [ 0.763500] la/ptsa driver initialized. [ 0.763665] NET: Registered protocol family 2 [ 0.763845] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.769397] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.769471] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.769776] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.770214] TCP: Hash tables configured (established 65536 bind 65536) [ 0.770331] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.770442] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.770646] NET: Registered protocol family 1 [ 0.771242] RPC: Registered named UNIX socket transport module. [ 0.771260] RPC: Registered udp transport module. [ 0.771269] RPC: Registered tcp transport module. [ 0.771279] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.771293] PCI: CLS 0 bytes, default 64 [ 0.771495] Trying to unpack rootfs image as initramfs... [ 0.955275] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.957514] Freeing initrd memory: 8196K [ 0.961847] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.961891] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.961941] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.962501] kvm [1]: IPA Size Limit: 40 bits [ 0.963006] kvm [1]: vgic interrupt IRQ9 [ 0.963680] kvm [1]: VHE mode initialized successfully [ 0.965108] Initialise system trusted keyrings [ 0.965363] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.969712] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.970356] NFS: Registering the id_resolver key type [ 0.970391] Key type id_resolver registered [ 0.970402] Key type id_legacy registered [ 0.970465] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.970483] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.970537] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.978770] NET: Registered protocol family 38 [ 0.978789] Key type asymmetric registered [ 0.978800] Asymmetric key parser 'x509' registered [ 0.978836] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.979001] io scheduler mq-deadline registered [ 0.979014] io scheduler kyber registered [ 0.983418] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.985718] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.985796] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.985866] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.985915] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.985965] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.990346] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.990374] scrncapt: init (heads:4 wins:6 planes:4) [ 0.991144] EINJ: ACPI disabled. [ 0.993295] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.993315] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.993325] tegra-pmc: ### PMC reset level: L1 [ 0.993342] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.993378] tegra-pmc: PMC Prod config success [ 0.997619] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.002097] random: fast init done [ 1.002492] printk: console [ttyTCU0] enabled [ 2.554315] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.558666] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.563319] arm-smmu 10000000.iommu: stage 1 translation [ 2.568979] arm-smmu 10000000.iommu: stage 2 translation [ 2.574219] arm-smmu 10000000.iommu: nested translation [ 2.579570] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.586740] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.598187] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.600118] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.606413] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.614611] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.619456] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.624190] arm-smmu 12000000.iommu: stage 1 translation [ 2.629943] arm-smmu 12000000.iommu: stage 2 translation [ 2.635125] arm-smmu 12000000.iommu: nested translation [ 2.640804] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.647978] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.658890] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.660848] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.667406] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.675082] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.684764] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.688084] tegra_profiler: auth: init [ 2.692413] THERMAL EST: found 3 subdevs [ 2.695499] THERMAL EST num_resources: 0 [ 2.699598] [THERMAL EST subdev 0] [ 2.702645] [THERMAL EST subdev 1] [ 2.706334] [THERMAL EST subdev 2] [ 2.709321] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.715760] THERMAL EST: thz register success. [ 2.720025] THERMAL EST: end of probe, return err: 0 [ 2.725561] nvsciipc: loaded module [ 2.732664] tun: Universal TUN/TAP device driver, 1.6 [ 2.734890] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.741088] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.746907] e1000e: Intel(R) PRO/1000 Network Driver [ 2.751631] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.757916] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.763209] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.769385] PPP generic driver version 2.4.2 [ 2.773660] PPP BSD Compression module registered [ 2.778214] PPP Deflate Compression module registered [ 2.783438] PPP MPPE Compression module registered [ 2.788188] usbcore: registered new interface driver r8152 [ 2.794024] usbcore: registered new interface driver asix [ 2.799045] usbcore: registered new interface driver ax88179_178a [ 2.805159] usbcore: registered new interface driver cdc_ether [ 2.811369] usbcore: registered new interface driver net1080 [ 2.816960] usbcore: registered new interface driver cdc_subset [ 2.822788] usbcore: registered new interface driver zaurus [ 2.828444] usbcore: registered new interface driver cdc_ncm [ 2.834131] usbcore: registered new interface driver aqc111 [ 2.839783] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.846104] ohci-pci: OHCI PCI platform driver [ 2.850161] ohci-platform: OHCI generic platform driver [ 2.856024] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.862598] usbcore: registered new interface driver uas [ 2.866701] usbcore: registered new interface driver usb-storage [ 2.872594] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.878959] mousedev: PS/2 mouse device common for all mice [ 2.883577] usbcore: registered new interface driver xpad [ 2.891904] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.894559] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.902377] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.908708] i2c /dev entries driver [ 2.912003] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.918091] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.923580] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.928538] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.934176] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.939626] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.945013] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.958840] device-mapper: uevent: version 1.0.3 [ 2.959349] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.965377] cpuidle: Initializing cpuidle driver [ 2.969478] sdhci: Secure Digital Host Controller Interface driver [ 2.974198] sdhci: Copyright(c) Pierre Ossman [ 2.978022] Synopsys Designware Multimedia Card Interface Driver [ 2.984181] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.990146] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.990732] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.003559] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.021717] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.030941] vdd-1v0: supplied by regulator-dummy [ 3.036292] vdd-1v8-hs: supplied by regulator-dummy [ 3.040993] vdd-1v8-ls: supplied by regulator-dummy [ 3.045615] vdd-1v8-ao: supplied by regulator-dummy [ 3.049382] vddio-ddr-1v1: supplied by regulator-dummy [ 3.053643] vdd-rtc: supplied by regulator-dummy [ 3.055281] spmic-ldo1: supplied by regulator-dummy [ 3.056385] vdd-ao-3v3: supplied by regulator-dummy [ 3.062354] vddio-emmc-3v3: supplied by regulator-dummy [ 3.068461] spmic-ldo4: supplied by regulator-dummy [ 3.069549] vdd-usb-3v3: supplied by regulator-dummy [ 3.075657] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.081696] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.087077] spmic-ldo8: supplied by vdd-1v8-ls [ 3.088417] gpio-510 (gpio_default): hogged as output/high [ 3.090155] gpio-511 (gpio_default): hogged as output/high [ 3.097293] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.235892] max77686-rtc max77620-rtc: registered as rtc0 [ 3.237133] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.237430] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.925909] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.926769] hid: raw HID events driver (C) Jiri Kosina [ 3.927522] usbcore: registered new interface driver usbhid [ 3.927669] usbhid: USB HID core driver [ 3.929283] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.930389] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.047627] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.123456] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.639 ms) ÿá[ 4.015960] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.016544] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.017470] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.018178] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.019698] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.020344] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.020875] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.022126] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.022437] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.024297] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.032767] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.038716] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.043914] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.049498] denver_knobs_init:MTS_VERSION:55637613 [ 4.061647] t19x_cache tegra-cache: probed [ 4.066783] optee: probing for conduit method. [ 4.067731] optee: revision 3.16 (65cc2218) [ 4.068766] optee: dynamic shared memory is enabled [ 4.070993] optee: initialized driver [ 4.077381] nvpmodel: initialized successfully [ 4.078302] tegra_hv: get_hvd: not initialized yet [ 4.083041] user_ivc_mempool: hypervisor not present [ 4.089123] usbcore: registered new interface driver snd-usb-audio [ 4.095474] u32 classifier [ 4.096731] input device check on [ 4.100434] Actions configured [ 4.104447] Initializing XFRM netlink socket [ 4.109341] NET: Registered protocol family 10 [ 4.116289] Segment Routing with IPv6 [ 4.116623] NET: Registered protocol family 17 [ 4.120908] NET: Registered protocol family 15 [ 4.125268] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.138592] Bluetooth: RFCOMM socket layer initialized [ 4.143326] Bluetooth: RFCOMM ver 1.11 [ 4.147404] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.153001] Bluetooth: HIDP socket layer initialized [ 4.158961] 9pnet: Installing 9P2000 support [ 4.162711] Key type dns_resolver registered [ 4.167781] registered taskstats version 1 [ 4.170884] Loading compiled-in X.509 certificates [ 4.183432] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.187002] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.196993] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.198784] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.207695] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.215760] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.331279] tegra194-pcie 14160000.pcie: Link up [ 4.334145] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.334326] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.334547] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.334768] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.334945] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.335341] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.335751] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.345814] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.346378] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.346878] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.348438] pci 0004:01:00.0: supports D1 D2 [ 4.348610] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.356786] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.357136] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.357397] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.357770] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.358073] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.359757] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.365821] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.373191] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.381720] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.391929] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.396991] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.402536] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.409040] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.418280] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.420036] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.428248] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.436959] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.552194] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.552989] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.553276] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.553435] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.553792] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.553975] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.554493] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.555032] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.575807] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.576186] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.577940] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.579657] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.581058] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.582948] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.584369] pci 0005:00:00.0: Removing from iommu group 7 [ 5.584771] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.620944] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.646178] host1x 13e10000.host1x: initialized [ 5.647901] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.648894] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.650315] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.651157] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.652685] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.653383] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.654619] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.655369] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.656404] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.657016] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.662515] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.669469] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.679506] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.686032] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.696319] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.703488] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.713193] falcon 15340000.vic: Adding to iommu group 17 [ 5.727770] falcon 15340000.vic: initialized [ 5.728634] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.734505] falcon 15380000.nvjpg: initialized [ 5.734993] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.745742] falcon 154c0000.nvenc: initialized [ 5.746411] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.756023] falcon 15a80000.nvenc1: initialized [ 5.756719] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.768783] nvdec 15480000.nvdec: initialized [ 5.769303] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.779166] nvdec 15140000.nvdec1: initialized [ 5.779747] tsec 15500000.tsec: Adding to iommu group 18 [ 5.785542] tsec 15500000.tsec: initialized [ 5.786076] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.793488] tsec 15100000.tsecb: initialized [ 5.797296] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.824829] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.838011] gpio-374 (wifi-enable): hogged as output/high [ 5.838390] gpio-431 (camera-control-output-low): hogged as output/low [ 5.838687] gpio-432 (camera-control-output-low): hogged as output/low [ 5.840244] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.842337] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.842827] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.844331] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.849795] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.855435] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.861198] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.869370] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.876883] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.888783] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.893246] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.899437] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.908075] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.917483] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.924760] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.932381] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.938369] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.947930] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.954306] pva 16000000.pva0: Adding to iommu group 22 [ 5.981504] pva 16000000.pva0: initialized [ 5.986231] pva 16800000.pva1: Adding to iommu group 23 [ 5.997855] pva 16800000.pva1: initialized [ 6.002077] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.014901] nvdla 15880000.nvdla0: initialized [ 6.016323] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.025002] nvdla 158c0000.nvdla1: initialized [ 6.028377] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.028704] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.028839] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.029078] tegradccommon 15200000.display-hub: dma mapping done [ 6.029345] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.030427] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.031066] tegradc 15200000.display: Adding to iommu group 26 [ 6.031104] tegradc 15210000.display: Adding to iommu group 26 [ 6.033105] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.038831] tegradc 15210000.display: disp0 connected to head1->sor [ 6.044068] tegra_cec 3960000.tegra_cec: probed [ 6.044906] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.050026] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.056279] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.060777] tegradc 15210000.display: DT parsed successfully [ 6.068033] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.073188] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.074073] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.080134] kfuse 3830000.kfuse: initialized [ 6.085396] generic_infoframe_type: 0x87 [ 6.092571] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.099667] tegradc 15200000.display: DT parsed successfully [ 6.106237] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.110359] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.115068] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.125192] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.141117] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.147176] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.157117] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.164148] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.165306] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.186672] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.192429] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.202922] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.208835] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.214328] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.227478] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.240802] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.244427] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.256596] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.262426] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.270657] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.279231] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.285776] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.293144] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.300613] usb usb1: Product: xHCI Host Controller [ 6.305277] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.311493] usb usb1: SerialNumber: 3610000.xhci [ 6.317152] hub 1-0:1.0: USB hub found [ 6.320104] hub 1-0:1.0: 4 ports detected [ 6.324797] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.329474] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.337327] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.344892] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.352639] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.359929] usb usb2: Product: xHCI Host Controller [ 6.365142] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.371418] usb usb2: SerialNumber: 3610000.xhci [ 6.376687] hub 2-0:1.0: USB hub found [ 6.379582] hub 2-0:1.0: 4 ports detected [ 6.422630] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.429128] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.431080] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.431406] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.445444] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.446517] tegra194-cpufreq ccplex: probed with BWMGR [ 6.447894] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.448448] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.448975] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.450202] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.455519] tegra194-vi5 15c10000.vi: initialized [ 6.456988] tegradc 15210000.display: disp0 connected to head1->sor [ 6.459752] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.459898] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.466165] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.473403] tegradc 15210000.display: DT parsed successfully [ 6.481431] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.481439] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.481450] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.487057] mmc0: CQHCI version 5.10 [ 6.487070] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.487233] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.487264] generic_infoframe_type: 0x87 [ 6.487343] tegradc 15200000.display: DT parsed successfully [ 6.487410] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.488306] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.488312] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.488317] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.488733] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.488739] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.488915] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.490135] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.490141] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.492204] tegradc 15200000.display: probed [ 6.493217] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.499284] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.529620] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.534170] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.534182] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.607208] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.610748] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.634808] mmc0: Command Queue Engine enabled [ 6.643967] mmc0: periodic cache flush enabled [ 6.644000] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.650715] nvethernet 2490000.ethernet: Macsec not supported [ 6.658936] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.664037] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.667056] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.674927] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.690552] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.691714] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.720048] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.720205] Console: switching to colour frame buffer device 240x67 [ 6.724448] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.726502] tegradc 15200000.display: fb registered [ 6.743990] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.751129] tegra-se-nvhost 15810000.se: initialized [ 6.751374] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.760875] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.770705] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.773157] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.779973] tegra-se-nvhost 15820000.se: initialized [ 6.786046] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.786926] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.790199] random: crng init done [ 6.790724] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.798528] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.798541] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.802687] tegra-se-nvhost 15830000.se: initialized [ 6.808295] usb 1-2: Manufacturer: Generic [ 6.810471] hub 1-2:1.0: USB hub found [ 6.816554] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.825753] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.829271] hub 1-2:1.0: 4 ports detected [ 6.829804] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.830476] tegra-se-nvhost 15840000.se: initialized [ 6.832177] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.833616] tegra_actmon d230000.actmon: in actmon_register()... [ 6.869793] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.875564] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.883340] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.889237] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.896882] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.905096] hvc_sysfs: hypervisor is not present [ 6.911431] Extcon AUX1(HDMI) enable [ 6.919561] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.923329] tegradc 15210000.display: disp1 connected to head1->sor [ 6.933491] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.940785] tegradc 15210000.display: DT parsed successfully [ 6.946306] tegradc 15210000.display: Display dc.000000009845b9b6 registered with id=1 [ 6.970204] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.970417] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.970614] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.973993] ALSA device list: [ 6.974365] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.974372] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.974815] usb 2-3: Manufacturer: Generic [ 6.977616] No soundcards found. [ 6.980957] tegradc 15210000.display: probed [ 7.002491] tegradc 15210000.display: fb registered [ 7.010746] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.014403] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.016321] Freeing unused kernel memory: 3968K [ 7.022395] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.022454] hub 2-3:1.0: USB hub found [ 7.027107] hub 2-3:1.0: 4 ports detected [ 7.035330] Run /init as init process [ 7.043703] tegradc 15210000.display: blank - powerdown [ 7.048800] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.056998] Extcon DP: HPD disabled [ 7.060564] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.067354] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.073446] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.091264] usb 1-3: new full-speed USB device number 3 using tegra-xusb ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.093647] tegradc 15200000.display: blank - powerdown [ 7.107067] Root device found: mmcblk0p1 [ 7.109135] Found dev node: /dev/mmcblk0p1 [ 7.111254] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.142876] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.142881] Extcon AUX1(HDMI) disable [ 7.144092] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.148052] Rootfs mounted over mmcblk0p1 [ 7.166360] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.167267] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.175816] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.175821] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.179257] tegradc 15200000.display: unblank [ 7.180371] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.180578] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.182653] Switching from initrd to actual rootfs [ 7.186453] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.188386] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.192401] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.192405] Extcon AUX1(HDMI) enable [ 7.205133] tegradc 15200000.display: sync windows ret = 247 [ 7.240468] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.245314] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.245319] usb 1-3: Product: Bluetooth Radio [ 7.245323] usb 1-3: Manufacturer: Realtek [ 7.245345] usb 1-3: SerialNumber: 00e04c000001 [ 7.265982] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.273123] Extcon HDMI: HPD enabled [ 7.276559] tegradc 15200000.display: hdmi: plugged [ 7.344058] systemd[1]: System time before build time, advancing clock. [ 7.414929] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.419866] systemd[1]: Detected architecture arm64. [ 7.474576] systemd[1]: Set hostname to . [ 7.634513] systemd-sysv-generator[250]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.987016] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.988794] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.994415] systemd[1]: Created slice system-modprobe.slice. [ 7.999161] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.003481] systemd[1]: Created slice User and Session Slice. [ 8.006916] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.011110] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.014701] systemd[1]: Reached target User and Group Name Lookups. [ 8.017992] systemd[1]: Reached target Slices. [ 8.021137] systemd[1]: Reached target Swap. [ 8.025199] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.028983] systemd[1]: Listening on Syslog Socket. [ 8.032563] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.036011] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.040286] systemd[1]: Listening on Journal Audit Socket. [ 8.043947] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.047811] systemd[1]: Listening on Journal Socket. [ 8.051639] systemd[1]: Listening on udev Control Socket. [ 8.055095] systemd[1]: Listening on udev Kernel Socket. [ 8.065056] systemd[1]: Mounting Huge Pages File System... [ 8.075131] systemd[1]: Mounting POSIX Message Queue File System... [ 8.083391] systemd[1]: Mounting RPC Pipe File System... [ 8.092261] systemd[1]: Mounting Kernel Debug File System... [ 8.101093] systemd[1]: Mounting Kernel Trace File System... [ 8.111395] systemd[1]: Starting Journal Service... [ 8.120456] systemd[1]: Starting Set the console keyboard layout... [ 8.128998] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.132597] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.139110] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.147325] systemd[1]: Started Nameserver information manager. [ 8.152138] systemd[1]: Reached target Network (Pre). [ 8.158972] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.161313] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.168519] systemd[1]: Starting Load Kernel Modules... [ 8.177149] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.185239] systemd[1]: Starting udev Coldplug all Devices... [ 8.195780] systemd[1]: Mounted Huge Pages File System. [ 8.199755] systemd[1]: Mounted POSIX Message Queue File System. [ 8.204197] systemd[1]: Mounted RPC Pipe File System. [ 8.206849] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.212011] systemd[1]: Mounted Kernel Debug File System. [ 8.215616] systemd[1]: Mounted Kernel Trace File System. [ 8.220335] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.222117] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.222642] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.225206] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.225219] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.225228] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.229900] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.230148] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.230317] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.230326] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.240884] systemd[1]: nvfb-udev.service: Succeeded. [ 8.245776] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.260509] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.265990] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.267849] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.280826] systemd[1]: Starting Load/Save Random Seed... [ 8.289786] systemd[1]: Starting Create System Users... [ 8.329544] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.329544] [ 8.339740] systemd[1]: Finished Load/Save Random Seed. [ 8.358735] systemd[1]: Finished Create System Users. [ 8.365722] systemd[1]: Finished Load Kernel Modules. [ 8.370156] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.376839] systemd[1]: Mounting Kernel Configuration File System... [ 8.385178] systemd[1]: Started OP-TEE Client Supplicant. [ 8.394605] systemd[1]: Starting Apply Kernel Variables... [ 8.402800] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.413060] systemd[1]: Finished Set the console keyboard layout. [ 8.420463] systemd[1]: Mounted Kernel Configuration File System. [ 9.730617] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.740366] imx219 9-0010: board setup failed [ 9.741753] imx219: probe of 9-0010 failed with error -121 [ 9.770517] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.777555] imx219 10-0010: board setup failed [ 9.778901] imx219: probe of 10-0010 failed with error -121 [ 9.927098] hot-surface-alert cooling state: 0 -> 1 [ 10.826600] using random self ethernet address [ 10.833300] using random host ethernet address [ 11.363933] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.365569] Creating 1 MTD partitions on "spi6.0": [ 11.367086] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.198867] using random self ethernet address [ 12.200586] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.828785] nvidia: loading out-of-tree module taints kernel. [ 58.561150] watchdog: watchdog0: watchdog did not stop! [ 59.048057] Trying to unregister non-registered hwtime source [ 62.105769] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.107347] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERRÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.310] I> sdmmc DDR50 mode [0001.328] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.345] W> Cannot find any partition table for 00000003 [0001.347] > PARTITION_MANAGER: Failed to publish partition. [0001.362] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.363] I> Active Boot chain : 0 [0002.034] I> Relocating BR-BCT [0002.036] > DEVICE_PROD: device prod is not initialized. [0002.342] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.343] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.343] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.344] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.344] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.345] I> dram_block larger than 80000000 [0002.347] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.359] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.362] I> found decompressor handler: lz4 [0002.590] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.592] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuratioÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿän might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.213] I> Welcome to NVDisp-Init [0003.213] I> NVDisp-Init version: t194-f9ecfedc [0003.214] I> CPU-BL Params @ 0xca020000 [0003.214] I> 0) Base:0x00000000 Size:0x00000000 [0003.214] I> 1) Base:0xc8300000 Size:0x00100000 [0003.215] I> 2) Base:0xc9800000 Size:0x00200000 [0003.215] I> 3) Base:0xc8600000 Size:0x00200000 [0003.217] I> 4) Base:0xc8200000 Size:0x00100000 [0003.222] I> 5) Base:0xc8100000 Size:0x00100000 [0003.226] I> 6) Base:0xc9400000 Size:0x00400000 [0003.231] I> 7) Base:0xc9000000 Size:0x00400000 [0003.235] I> 8) Base:0xc8000000 Size:0x00100000 [0003.240] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.244] I> 10) Base:0xca800000 Size:0x00800000 [0003.249] I> 11) Base:0x40000000 Size:0x00040000 [0003.253] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.258] I> 13) Base:0x40046000 Size:0x00002000 [0003.262] I> 14) Base:0x40048000 Size:0x00002000 [0003.266] I> 15) Base:0xaf000000 Size:0x00004000 [0003.271] I> 16) Base:0x4004a000 Size:0x00002000 [0003.275] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.280] I> 18) Base:0x4004c000 Size:0x00002000 [0003.284] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.289] I> 20) Base:0x4004e000 Size:0x00002000 [0003.293] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.298] I> 22) Base:0x00000000 Size:0x00000000 [0003.302] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.307] I> 24) Base:0xcc000000 Size:0x02000000 [0003.311] I> 25) Base:0x40050000 Size:0x00002000 [0003.316] I> 26) Base:0x40040000 Size:0x00006000 [0003.320] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.324] I> 28) Base:0xc8400000 Size:0x00200000 [0003.329] I> 29) Base:0xc8800000 Size:0x00400000 [0003.333] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.338] I> 31) Base:0x00000000 Size:0x00000000 [0003.342] I> 32) Base:0xf8000000 Size:0x08000000 [0003.347] I> 33) Base:0xce000000 Size:0x2a000000 [0003.351] I> 34) Base:0xcb000000 Size:0x01000000 [0003.356] I> 35) Base:0xae000000 Size:0x01000000 [0003.360] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.365] I> 37) Base:0xca000000 Size:0x00800000 [0003.369] I> 38) Base:0x80000000 Size:0x20000000 [0003.374] I> 39) Base:0xb0000000 Size:0x08000000 [0003.378] I> 40) Base:0x00000000 Size:0x00000000 [0003.382] I> 41) Base:0x00000000 Size:0x00000000 [0003.387] I> 42) Base:0x00000000 Size:0x00000000 [0003.391] I> 43) Base:0x00000000 Size:0x00000000 [0003.396] I> 44) Base:0x00000000 Size:0x00000000 [0003.400] I> 45) Base:0x00000000 Size:0x00000000 [0003.405] GIC-SPI Target CPU: 0 [0003.408] Interrupts Init done [0003.411] calling constructors [0003.414] initializing heap [0003.416] I> Heap: [0xa0960000 ... 0xadf00000] [0003.420] initializing threads [0003.423] initializing timers [0003.426] creating bootstrap completion thread [0003.430] top of bootstrap2() [0003.433] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.438] initializing platform [0003.441] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.446] W> device prod register failed [0003.450] I> Bl_dtb @0xadf00000 [0003.453] I> gpio framework initialized [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.471] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.475] I> fixed regulator driver initialized [0003.492] I> register 'maxim' power off handle [0003.494] I> virtual i2c enabled [0003.495] I> registered 'maxim,max20024' pmic [0003.495] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.496] I> Boot-device: QSPI [0003.497] I> Boot_device: QSPI_FLASH instance: 0 [0003.502] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.512] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.520] I> QSPI source rate = 204000 Khz [0003.523] I> Requested rate for QSPI clock = 34000 Khz [0003.528] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.533] I> tx_clk_tap_delay : 0 [0003.536] I> rx_clk_tap_delay : 16 [0003.539] I> QSPI Flash Size = 32 MB [0003.547] I> Qspi initialized successfully [0003.547] I> qspi flash-0 params source = boot args [0003.551] W> No board IDs available [0003.554] E> Failed to get board id info! [0003.560] I> sdmmc-3 params source = safe params [0003.567] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.569] W> Cannot find any partition table for 00000003 [0003.573] E> Failed to publish 00000003 [0003.578] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> regulator 'vdd-hdmi-5v0' already enabled [0003.606] I> hdmi cable connected [0003.611] W> set volts not configured for 'vdd-1v0' [0003.616] W> set volts not configured for 'vdd-1v8-hs' [0003.616] I> retrieved tmds range from prod_list_hdmi_soc [0003.621] E> invalid display type [0003.623] E> cannot find any other nvdisp nodes [0003.639] I> edid read success [0003.651] I> edid read success [0003.652] I> width = 640, height = 480, frequency = 25174825 [0003.652] I> width = 1920, height = 1080, frequency = 148500000 [0003.653] I> width = 1280, height = 768, frequency = 79500000 [0003.653] I> width = 1360, height = 768, frequency = 85500000 [0003.653] I> width = 720, height = 480, frequency = 26973026 [0003.657] I> width = 720, height = 576, frequency = 26973026 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.686] I> width = 720, height = 480, frequency = 26973026 [0003.691] I> width = 720, height = 576, frequency = 26973026 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 4096, height = 2160, frequency = 296703296 [0003.725] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.737] I> hdmi_enable, starting HDMI initialisation [0003.741] I> hdmi_enable, HDMI initialisation complete [0003.750] initializing target [0003.751] calling apps_init() [0003.752] starting app kernel_boot_app [0003.753] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000654] Console: colour dummy device 80x25 [ 0.002040] printk: console [tty0] enabled [ 0.002108] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002144] pid_max: default: 32768 minimum: 301 [ 0.002307] LSM: Security Framework initializing [ 0.002368] Yama: becoming mindful. [ 0.002435] SELinux: Initializing. [ 0.002622] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002666] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005796] rcu: Hierarchical SRCU implementation. [ 0.006083] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006754] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006827] DTB Build time: Aug 10 2022 20:31:49 [ 0.009499] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009735] Remapping and enabling EFI services. [ 0.011622] smp: Bringing up secondary CPUs ... [ 0.044805] Detected PIPT I-cache on CPU1 [ 0.044905] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074434] Detected PIPT I-cache on CPU2 [ 0.074583] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104200] Detected PIPT I-cache on CPU3 [ 0.104334] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134074] Detected PIPT I-cache on CPU4 [ 0.134175] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163993] Detected PIPT I-cache on CPU5 [ 0.164139] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164528] smp: Brought up 1 node, 6 CPUs [ 0.164714] SMP: Total of 6 processors activated. [ 0.164778] CPU features: detected: Privileged Access Never [ 0.164804] CPU features: detected: LSE atomic instructions [ 0.164819] CPU features: detected: User Access Override [ 0.164834] CPU features: detected: 32-bit EL0 Support [ 0.164848] CPU features: detected: RAS Extension Support [ 0.164861] CPU features: detected: CRC32 instructions [ 0.164876] CPU features: detected: 32-bit EL1 Support [ 0.238966] CPU: All CPU(s) started at EL2 [ 0.245021] devtmpfs: initialized [ 0.294923] Registered cp15_barrier emulation handler [ 0.295028] Registered setend emulation handler [ 0.295053] KASLR enabled [ 0.295316] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.295340] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.296656] pinctrl core: initialized pinctrl subsystem [ 0.297560] SMBIOS 3.0.0 present. [ 0.297600] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.298301] NET: Registered protocol family 16 [ 0.300236] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.300731] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.301431] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.301511] audit: initializing netlink subsys (disabled) [ 0.301763] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.302248] thermal_sys: Registered thermal governor 'step_wise' [ 0.302255] thermal_sys: Registered thermal governor 'power_allocator' [ 0.302271] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.304524] cpuidle: using governor menu [ 0.305099] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.305479] ASID allocator initialised with 32768 entries [ 0.305717] Serial: AMBA PL011 UART driver [ 0.308912] Tegra reboot handler registered. [ 0.384724] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.384844] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.385016] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.385069] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.385215] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.385268] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.385385] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.385438] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.385556] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.385608] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.387951] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.387990] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.388024] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.388069] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.388108] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.388135] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.388172] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.388202] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.388240] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.388267] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.388318] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.388344] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.388372] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.388396] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.388420] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.388444] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.388469] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.388555] mc-err: mcerr ops are set to t19x [ 0.400865] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.400887] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.400898] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.400908] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.407640] ACPI: Interpreter disabled. [ 0.408896] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.410333] iommu: Default domain type: Translated [ 0.410406] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.410747] SCSI subsystem initialized [ 0.410935] usbcore: registered new interface driver usbfs [ 0.410976] usbcore: registered new interface driver hub [ 0.411008] usbcore: registered new device driver usb [ 0.411515] mc: Linux media interface: v0.10 [ 0.411544] videodev: Linux video capture interface: v2.00 [ 0.411966] pps_core: LinuxPPS API ver. 1 registered [ 0.411980] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.412000] PTP clock support registered [ 0.412266] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.412573] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.412658] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.413284] Registered efivars operations [ 0.419393] FPGA manager framework [ 0.419498] Advanced Linux Sound Architecture Driver Initialized. [ 0.420138] Bluetooth: Core ver 2.22 [ 0.420175] NET: Registered protocol family 31 [ 0.420185] Bluetooth: HCI device and connection manager initialized [ 0.420199] Bluetooth: HCI socket layer initialized [ 0.420213] Bluetooth: L2CAP socket layer initialized [ 0.420232] Bluetooth: SCO socket layer initialized [ 0.421862] camchar: rtcpu character device driver loaded [ 0.422574] clocksource: Switched to clocksource arch_sys_counter [ 0.721750] VFS: Disk quotas dquot_6.6.0 [ 0.721824] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.722180] pnp: PnP ACPI: disabled [ 0.734880] la/ptsa driver initialized. [ 0.735030] NET: Registered protocol family 2 [ 0.735204] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.739821] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.739914] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.740217] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.740655] TCP: Hash tables configured (established 65536 bind 65536) [ 0.740791] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.740927] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.741109] NET: Registered protocol family 1 [ 0.741877] RPC: Registered named UNIX socket transport module. [ 0.741901] RPC: Registered udp transport module. [ 0.741915] RPC: Registered tcp transport module. [ 0.741928] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.741971] PCI: CLS 0 bytes, default 64 [ 0.742198] Trying to unpack rootfs image as initramfs... [ 0.930120] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.932272] Freeing initrd memory: 8196K [ 0.937214] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.937249] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.937307] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.937904] kvm [1]: IPA Size Limit: 40 bits [ 0.938544] kvm [1]: vgic interrupt IRQ9 [ 0.939055] kvm [1]: VHE mode initialized successfully [ 0.940497] Initialise system trusted keyrings [ 0.940807] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.945890] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.946750] NFS: Registering the id_resolver key type [ 0.946776] Key type id_resolver registered [ 0.946786] Key type id_legacy registered [ 0.946877] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.946921] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.946948] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.957697] NET: Registered protocol family 38 [ 0.957740] Key type asymmetric registered [ 0.957760] Asymmetric key parser 'x509' registered [ 0.957803] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.958048] io scheduler mq-deadline registered [ 0.958062] io scheduler kyber registered [ 0.963053] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.965261] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.965319] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.965369] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.965428] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.965480] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.970239] scrncapt: init (heads:4 wins:6 planes:4) [ 0.970632] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.971289] EINJ: ACPI disabled. [ 0.973709] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.973730] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.973741] tegra-pmc: ### PMC reset level: L1 [ 0.973751] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.973809] tegra-pmc: PMC Prod config success [ 0.979007] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.983358] random: fast init done [ 0.983419] printk: console [ttyTCU0] enabled [ 2.535909] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.540635] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.545163] arm-smmu 10000000.iommu: stage 1 translation [ 2.550673] arm-smmu 10000000.iommu: stage 2 translation [ 2.556200] arm-smmu 10000000.iommu: nested translation [ 2.561279] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.568446] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.579093] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.581552] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.588132] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.595953] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.601428] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.605889] arm-smmu 12000000.iommu: stage 1 translation [ 2.611650] arm-smmu 12000000.iommu: stage 2 translation [ 2.617094] arm-smmu 12000000.iommu: nested translation [ 2.622526] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.629429] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.639764] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.642535] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.649378] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.656687] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.666835] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.669626] tegra_profiler: auth: init [ 2.673825] THERMAL EST: found 3 subdevs [ 2.677240] THERMAL EST num_resources: 0 [ 2.681354] [THERMAL EST subdev 0] [ 2.684642] [THERMAL EST subdev 1] [ 2.688063] [THERMAL EST subdev 2] [ 2.691310] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.697771] THERMAL EST: thz register success. [ 2.702022] THERMAL EST: end of probe, return err: 0 [ 2.707322] nvsciipc: loaded module [ 2.714072] tun: Universal TUN/TAP device driver, 1.6 [ 2.716586] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.723106] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.728698] e1000e: Intel(R) PRO/1000 Network Driver [ 2.733309] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.739657] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.744957] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.751209] PPP generic driver version 2.4.2 [ 2.755409] PPP BSD Compression module registered [ 2.759908] PPP Deflate Compression module registered [ 2.764887] PPP MPPE Compression module registered [ 2.770181] usbcore: registered new interface driver r8152 [ 2.775664] usbcore: registered new interface driver asix [ 2.780733] usbcore: registered new interface driver ax88179_178a [ 2.786856] usbcore: registered new interface driver cdc_ether [ 2.792804] usbcore: registered new interface driver net1080 [ 2.798405] usbcore: registered new interface driver cdc_subset [ 2.804463] usbcore: registered new interface driver zaurus [ 2.810414] usbcore: registered new interface driver cdc_ncm [ 2.815840] usbcore: registered new interface driver aqc111 [ 2.821477] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.827828] ohci-pci: OHCI PCI platform driver [ 2.831881] ohci-platform: OHCI generic platform driver [ 2.837586] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.844246] usbcore: registered new interface driver uas [ 2.848422] usbcore: registered new interface driver usb-storage [ 2.854514] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.860489] mousedev: PS/2 mouse device common for all mice [ 2.865288] usbcore: registered new interface driver xpad [ 2.873172] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.876064] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.883836] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.890536] i2c /dev entries driver [ 2.893911] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.899497] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.905098] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.910450] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.915776] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.921052] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.926801] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.939433] device-mapper: uevent: version 1.0.3 [ 2.939884] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.946949] cpuidle: Initializing cpuidle driver [ 2.951045] sdhci: Secure Digital Host Controller Interface driver [ 2.955887] sdhci: Copyright(c) Pierre Ossman [ 2.959745] Synopsys Designware Multimedia Card Interface Driver [ 2.966168] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.972226] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.972838] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.985360] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.005324] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.014845] vdd-1v0: supplied by regulator-dummy [ 3.020398] vdd-1v8-hs: supplied by regulator-dummy [ 3.025177] vdd-1v8-ls: supplied by regulator-dummy [ 3.029932] vdd-1v8-ao: supplied by regulator-dummy [ 3.033811] vddio-ddr-1v1: supplied by regulator-dummy [ 3.038223] vdd-rtc: supplied by regulator-dummy [ 3.040030] spmic-ldo1: supplied by regulator-dummy [ 3.041243] vdd-ao-3v3: supplied by regulator-dummy [ 3.047304] vddio-emmc-3v3: supplied by regulator-dummy [ 3.053499] spmic-ldo4: supplied by regulator-dummy [ 3.054709] vdd-usb-3v3: supplied by regulator-dummy [ 3.060856] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.066953] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.072486] spmic-ldo8: supplied by vdd-1v8-ls [ 3.073884] gpio-510 (gpio_default): hogged as output/high [ 3.075199] gpio-511 (gpio_default): hogged as output/high [ 3.078746] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.217661] max77686-rtc max77620-rtc: registered as rtc0 [ 3.218658] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.218982] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.943261] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.944333] hid: raw HID events driver (C) Jiri Kosina [ 3.945083] usbcore: registered new interface driver usbhid [ 3.945217] usbhid: USB HID core driver [ 3.947012] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.948308] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.079891] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.154941] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.858 ms) ÿá[ 4.033423] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.034175] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.035842] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.036986] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.039430] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.040059] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.040717] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.042281] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.042904] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.045555] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.050143] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.056712] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.061517] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.069591] denver_knobs_init:MTS_VERSION:55637613 [ 4.080762] t19x_cache tegra-cache: probed [ 4.083862] optee: probing for conduit method. [ 4.084745] optee: revision 3.16 (65cc2218) [ 4.086110] optee: dynamic shared memory is enabled [ 4.088154] optee: initialized driver [ 4.094784] nvpmodel: initialized successfully [ 4.095688] tegra_hv: get_hvd: not initialized yet [ 4.100402] user_ivc_mempool: hypervisor not present [ 4.106790] usbcore: registered new interface driver snd-usb-audio [ 4.113160] u32 classifier [ 4.114114] input device check on [ 4.118141] Actions configured [ 4.121523] Initializing XFRM netlink socket [ 4.126441] NET: Registered protocol family 10 [ 4.132997] Segment Routing with IPv6 [ 4.133723] NET: Registered protocol family 17 [ 4.138138] NET: Registered protocol family 15 [ 4.142716] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.156133] Bluetooth: RFCOMM socket layer initialized [ 4.160800] Bluetooth: RFCOMM ver 1.11 [ 4.164920] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.170752] Bluetooth: HIDP socket layer initialized [ 4.176700] 9pnet: Installing 9P2000 support [ 4.180179] Key type dns_resolver registered [ 4.185365] registered taskstats version 1 [ 4.188547] Loading compiled-in X.509 certificates [ 4.201001] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.204596] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.214765] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.216447] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.224850] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.233299] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.350714] tegra194-pcie 14160000.pcie: Link up [ 4.353547] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.353779] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.353990] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.354226] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.354453] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.354921] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.355372] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.368910] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.369551] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.370059] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.371780] pci 0004:01:00.0: supports D1 D2 [ 4.371934] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.380013] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.380345] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.380635] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.381034] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.381336] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.381551] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.385609] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.392649] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.401697] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.411775] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.416439] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.422051] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.429002] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.438308] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.439289] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.447757] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.456294] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.562978] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.563794] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.564016] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.564175] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.564457] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.564686] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.565078] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.565503] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.581101] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.581462] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.583506] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.584771] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.586768] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.588549] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.589524] pci 0005:00:00.0: Removing from iommu group 7 [ 5.589837] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.621967] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.644563] host1x 13e10000.host1x: initialized [ 5.646043] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.647096] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.648151] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.648755] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.649749] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.650356] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.651376] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.651978] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.656336] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.663482] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.673161] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.680324] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.689872] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.697212] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.707119] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.713918] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.724010] falcon 15340000.vic: Adding to iommu group 17 [ 5.739792] falcon 15340000.vic: initialized [ 5.740990] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.747320] falcon 15380000.nvjpg: initialized [ 5.748119] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.757024] falcon 154c0000.nvenc: initialized [ 5.757686] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.766737] falcon 15a80000.nvenc1: initialized [ 5.767533] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.778784] nvdec 15480000.nvdec: initialized [ 5.779437] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.789547] nvdec 15140000.nvdec1: initialized [ 5.790066] tsec 15500000.tsec: Adding to iommu group 18 [ 5.796443] tsec 15500000.tsec: initialized [ 5.797078] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.804457] tsec 15100000.tsecb: initialized [ 5.808485] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.832254] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.845269] gpio-374 (wifi-enable): hogged as output/high [ 5.845592] gpio-431 (camera-control-output-low): hogged as output/low [ 5.845875] gpio-432 (camera-control-output-low): hogged as output/low [ 5.847835] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.849738] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.850266] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.855028] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.860536] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.866152] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.871967] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.880007] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.887810] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.899218] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.904228] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.910303] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.918912] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.928097] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.935541] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.943252] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.949549] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.959189] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.965411] pva 16000000.pva0: Adding to iommu group 22 [ 5.992277] pva 16000000.pva0: initialized [ 5.998328] pva 16800000.pva1: Adding to iommu group 23 [ 6.009507] pva 16800000.pva1: initialized [ 6.014913] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.027409] nvdla 15880000.nvdla0: initialized [ 6.029067] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.038936] nvdla 158c0000.nvdla1: initialized [ 6.044181] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.044344] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.044528] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.044872] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.045117] tegradc 15210000.display: Adding to iommu group 26 [ 6.045197] tegradc 15200000.display: Adding to iommu group 26 [ 6.045445] tegradccommon 15200000.display-hub: dma mapping done [ 6.046286] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.054120] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.055502] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.062041] generic_infoframe_type: 0x87 [ 6.067233] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.071264] tegradc 15200000.display: DT parsed successfully [ 6.076915] tegra_cec 3960000.tegra_cec: probed [ 6.082419] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.088027] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.102698] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.103791] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.109081] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.116464] kfuse 3830000.kfuse: initialized [ 6.124289] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.137034] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.137660] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.142665] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.154928] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.161690] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.162679] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.179363] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.188648] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.189805] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.201239] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.201475] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.209675] tegradc 15210000.display: disp0 connected to head1->sor [ 6.222703] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.223315] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.229704] tegradc 15210000.display: DT parsed successfully [ 6.236415] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.241216] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.269359] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.269727] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.272862] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.281416] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.289837] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.296322] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.304152] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.311210] usb usb1: Product: xHCI Host Controller [ 6.316196] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.322492] usb usb1: SerialNumber: 3610000.xhci [ 6.328015] hub 1-0:1.0: USB hub found [ 6.331168] hub 1-0:1.0: 4 ports detected [ 6.335705] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.340296] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.347887] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.355575] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.363741] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.370988] usb usb2: Product: xHCI Host Controller [ 6.375723] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.381913] usb usb2: SerialNumber: 3610000.xhci [ 6.387300] hub 2-0:1.0: USB hub found [ 6.390398] hub 2-0:1.0: 4 ports detected [ 6.431719] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.437120] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.438112] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.438290] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.451264] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.452266] tegra194-cpufreq ccplex: probed with BWMGR [ 6.453335] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.454089] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.454636] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.455925] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.464475] mmc0: CQHCI version 5.10 [ 6.468848] tegra194-vi5 15c10000.vi: initialized [ 6.470388] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.471409] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.474639] generic_infoframe_type: 0x87 [ 6.481042] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.484489] tegradc 15200000.display: DT parsed successfully [ 6.492765] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.492775] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.492780] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.492784] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.524564] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.525211] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.533305] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.539077] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.539082] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.546844] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.546858] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.553678] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.561825] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.570925] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.577826] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.578123] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.592150] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.598593] nvethernet 2490000.ethernet: Macsec not supported [ 6.604689] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.610680] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.617358] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.625407] tegradc 15200000.display: probed [ 6.625511] mmc0: Command Queue Engine enabled [ 6.625516] mmc0: periodic cache flush enabled [ 6.625529] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.626014] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.626143] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.629938] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.630040] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.630176] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.630291] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.631329] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.691143] tegra-se-nvhost 15810000.se: initialized [ 6.721991] Console: switching to colour frame buffer device 240x67 [ 6.726867] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.727898] tegradc 15200000.display: fb registered [ 6.734446] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.739117] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.745577] tegra-se-nvhost 15820000.se: initialized [ 6.751606] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.757384] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.761868] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.768752] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.781119] tegra-se-nvhost 15830000.se: initialized [ 6.786356] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.792040] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.793785] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.798263] tegra-se-nvhost 15840000.se: initialized [ 6.805664] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.805669] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.812375] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.818081] usb 1-2: Manufacturer: Generic [ 6.820305] hub 1-2:1.0: USB hub found [ 6.824330] tegra_actmon d230000.actmon: in actmon_register()... [ 6.830265] hub 1-2:1.0: 4 ports detected [ 6.833228] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.840202] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.843506] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.848246] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.853333] hvc_sysfs: hypervisor is not present [ 6.861399] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.862032] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.896084] ALSA device list: [ 6.896311] Extcon AUX1(HDMI) enable [ 6.899641] No soundcards found. [ 6.902989] tegradc 15210000.display: disp1 connected to head1->sor [ 6.911475] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.912824] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.927624] tegradc 15210000.display: DT parsed successfully [ 6.933108] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.941488] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.947496] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.955860] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.962158] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.969046] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.973904] usb 2-3: Manufacturer: Generic [ 6.979689] tegradc 15210000.display: probed [ 6.982469] tegradc 15210000.display: fb registered [ 6.988849] hub 2-3:1.0: USB hub found [ 6.992261] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.993014] hub 2-3:1.0: 4 ports detected [ 6.998785] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.998798] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.000851] Freeing unused kernel memory: 3968K [ 7.020311] tegradc 15210000.display: blank - powerdown [ 7.025814] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.030722] Run /init as init process [ 7.034035] Extcon DP: HPD disabled ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.040866] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.040878] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.040884] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.040984] tegradc 15200000.display: blank - powerdown [ 7.074674] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.090660] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.090664] Extcon AUX1(HDMI) disable [ 7.106654] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.106659] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.113898] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.114783] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.127799] tegradc 15200000.display: unblank [ 7.128852] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.129061] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.134819] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.136764] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.140744] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.140748] Extcon AUX1(HDMI) enable [ 7.153521] tegradc 15200000.display: sync windows ret = 247 [ 7.186745] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.188209] Extcon HDMI: HPD enabled [ 7.191045] tegradc 15200000.display: hdmi: plugged [ 7.223856] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.225402] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.226908] usb 1-3: Product: Bluetooth Radio [ 7.228268] usb 1-3: Manufacturer: Realtek [ 7.229603] usb 1-3: SerialNumber: 00e04c000001 [ 7.243428] Root device found: mmcblk0p1 [ 7.246832] Found dev node: /dev/mmcblk0p1 [ 7.283482] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.288908] Rootfs mounted over mmcblk0p1 [ 7.327505] Switching from initrd to actual rootfs [ 7.478128] systemd[1]: System time before build time, advancing clock. [ 7.551250] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.556255] systemd[1]: Detected architecture arm64. [ 7.597947] systemd[1]: Set hostname to . [ 7.761508] systemd-sysv-generator[242]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.119617] random: systemd: uninitialized urandom read (16 bytes read) [ 8.121439] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.123247] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.129090] systemd[1]: Created slice system-modprobe.slice. [ 8.132913] random: systemd: uninitialized urandom read (16 bytes read) [ 8.135754] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.139079] random: systemd: uninitialized urandom read (16 bytes read) [ 8.141724] systemd[1]: Created slice User and Session Slice. [ 8.145601] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.149941] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.153570] systemd[1]: Reached target User and Group Name Lookups. [ 8.156969] systemd[1]: Reached target Slices. [ 8.160209] systemd[1]: Reached target Swap. [ 8.164433] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.168302] systemd[1]: Listening on Syslog Socket. [ 8.171994] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.175545] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.179945] systemd[1]: Listening on Journal Audit Socket. [ 8.183730] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.187697] systemd[1]: Listening on Journal Socket. [ 8.191598] systemd[1]: Listening on udev Control Socket. [ 8.195346] systemd[1]: Listening on udev Kernel Socket. [ 8.204137] systemd[1]: Mounting Huge Pages File System... [ 8.212871] systemd[1]: Mounting POSIX Message Queue File System... [ 8.221453] systemd[1]: Mounting RPC Pipe File System... [ 8.233356] systemd[1]: Mounting Kernel Debug File System... [ 8.242127] systemd[1]: Mounting Kernel Trace File System... [ 8.252354] systemd[1]: Starting Journal Service... [ 8.261628] systemd[1]: Starting Set the console keyboard layout... [ 8.270071] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.273823] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.280288] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.288581] systemd[1]: Started Nameserver information manager. [ 8.293428] systemd[1]: Reached target Network (Pre). [ 8.300682] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.302678] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.310887] systemd[1]: Starting Load Kernel Modules... [ 8.319712] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.327502] systemd[1]: Starting udev Coldplug all Devices... [ 8.338451] systemd[1]: Mounted Huge Pages File System. [ 8.342379] systemd[1]: Mounted POSIX Message Queue File System. [ 8.346099] systemd[1]: Mounted RPC Pipe File System. [ 8.346918] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.354148] systemd[1]: Mounted Kernel Debug File System. [ 8.355314] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.357972] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.357978] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.357989] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.357992] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.358215] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.358435] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.358686] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.358696] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.377401] systemd[1]: Mounted Kernel Trace File System. [ 8.388017] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.393279] systemd[1]: nvfb-udev.service: Succeeded. [ 8.398196] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.410298] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.425041] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.426855] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.434116] systemd[1]: Starting Load/Save Random Seed... [ 8.442237] systemd[1]: Starting Create System Users... [ 8.446634] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.446634] [ 8.482211] systemd[1]: Finished Load Kernel Modules. [ 8.486829] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.494172] systemd[1]: Mounting Kernel Configuration File System... [ 8.503338] systemd[1]: Started OP-TEE Client Supplicant. [ 8.511925] systemd[1]: Starting Apply Kernel Variables... [ 8.521646] systemd[1]: Finished Set the console keyboard layout. [ 8.525867] systemd[1]: Mounted Kernel Configuration File System. [ 8.541407] systemd[1]: Finished Create System Users. [ 9.518622] random: crng init done [ 9.519944] random: 7 urandom warning(s) missed due to ratelimiting [ 10.057374] hot-surface-alert cooling state: 0 -> 1 [ 10.106757] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.114698] imx219 9-0010: board setup failed [ 10.116029] imx219: probe of 9-0010 failed with error -121 [ 10.133790] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.141134] imx219 10-0010: board setup failed [ 10.142447] imx219: probe of 10-0010 failed with error -121 [ 10.947205] using random self ethernet address [ 10.948534] using random host ethernet address [ 11.457055] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.458337] Creating 1 MTD partitions on "spi6.0": [ 11.460480] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.346160] using random self ethernet address [ 12.347738] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.799096] nvidia: loading out-of-tree module taints kernel. [ 58.856327] watchdog: watchdog0: watchdog did not stop! [ 59.347676] Trying to unregister non-registered hwtime source [ 62.408929] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.410626] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeouôÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.327] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.361] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.035] > DEVICE_PROD: device prod is not initialized. [0002.340] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.341] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.342] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.342] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.343] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.343] I> dram_block larger than 80000000 [0002.345] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.357] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.360] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.591] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized ÿä1ÿânoc_late initialized pm_post initialized dbells initialized ÿä1 03ÿâdmce initialized cvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 aÿâavfs_clk_platform_post initialized ÿäarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.210] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.211] I> CPU-BL Params @ 0xca020000 [0003.211] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.212] I> 2) Base:0xc9800000 Size:0x00200000 [0003.212] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.219] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.228] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.237] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.246] I> 11) Base:0x40000000 Size:0x00040000 [0003.250] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.255] I> 13) Base:0x40046000 Size:0x00002000 [0003.259] I> 14) Base:0x40048000 Size:0x00002000 [0003.264] I> 15) Base:0xaf000000 Size:0x00004000 [0003.268] I> 16) Base:0x4004a000 Size:0x00002000 [0003.273] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.277] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.286] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.295] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.304] I> 24) Base:0xcc000000 Size:0x02000000 [0003.308] I> 25) Base:0x40050000 Size:0x00002000 [0003.313] I> 26) Base:0x40040000 Size:0x00006000 [0003.317] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.322] I> 28) Base:0xc8400000 Size:0x00200000 [0003.326] I> 29) Base:0xc8800000 Size:0x00400000 [0003.331] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.335] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.344] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.353] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.362] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.371] I> 39) Base:0xb0000000 Size:0x08000000 [0003.375] I> 40) Base:0x00000000 Size:0x00000000 [0003.380] I> 41) Base:0x00000000 Size:0x00000000 [0003.384] I> 42) Base:0x00000000 Size:0x00000000 [0003.389] I> 43) Base:0x00000000 Size:0x00000000 [0003.393] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.402] GIC-SPI Target CPU: 0 [0003.405] Interrupts Init done [0003.408] calling constructors [0003.411] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.418] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.428] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.435] initializing platform [0003.438] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.447] I> Bl_dtb @0xadf00000 [0003.450] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.491] I> register 'maxim' power off handle [0003.496] I> virtual i2c enabled [0003.496] I> registered 'maxim,max20024' pmic [0003.496] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.497] I> Boot-device: QSPI [0003.497] I> Boot_device: QSPI_FLASH instance: 0 [0003.499] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.517] I> QSPI source rate = 204000 Khz [0003.520] I> Requested rate for QSPI clock = 34000 Khz [0003.525] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.530] I> tx_clk_tap_delay : 0 [0003.533] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.544] I> Qspi initialized successfully [0003.544] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.557] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.566] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.575] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.609] W> set volts not configured for 'vdd-1v0' [0003.614] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.650] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.750] calling apps_init() [0003.751] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000746] Console: colour dummy device 80x25 [ 0.002157] printk: console [tty0] enabled [ 0.002216] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002250] pid_max: default: 32768 minimum: 301 [ 0.002439] LSM: Security Framework initializing [ 0.002498] Yama: becoming mindful. [ 0.002542] SELinux: Initializing. [ 0.002692] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002736] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005659] rcu: Hierarchical SRCU implementation. [ 0.005906] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006764] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006820] DTB Build time: Aug 10 2022 20:31:49 [ 0.009442] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009682] Remapping and enabling EFI services. [ 0.011776] smp: Bringing up secondary CPUs ... [ 0.041618] Detected PIPT I-cache on CPU1 [ 0.041749] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071204] Detected PIPT I-cache on CPU2 [ 0.071356] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100970] Detected PIPT I-cache on CPU3 [ 0.101148] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130872] Detected PIPT I-cache on CPU4 [ 0.131103] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160908] Detected PIPT I-cache on CPU5 [ 0.161066] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161396] smp: Brought up 1 node, 6 CPUs [ 0.161552] SMP: Total of 6 processors activated. [ 0.161608] CPU features: detected: Privileged Access Never [ 0.161630] CPU features: detected: LSE atomic instructions [ 0.161644] CPU features: detected: User Access Override [ 0.161658] CPU features: detected: 32-bit EL0 Support [ 0.161671] CPU features: detected: RAS Extension Support [ 0.161684] CPU features: detected: CRC32 instructions [ 0.161697] CPU features: detected: 32-bit EL1 Support [ 0.230635] CPU: All CPU(s) started at EL2 [ 0.236567] devtmpfs: initialized [ 0.289633] Registered cp15_barrier emulation handler [ 0.289803] Registered setend emulation handler [ 0.289824] KASLR enabled [ 0.290181] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.290211] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291653] pinctrl core: initialized pinctrl subsystem [ 0.292622] SMBIOS 3.0.0 present. [ 0.292651] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.293298] NET: Registered protocol family 16 [ 0.295226] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295730] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296432] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296493] audit: initializing netlink subsys (disabled) [ 0.296810] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.297211] thermal_sys: Registered thermal governor 'step_wise' [ 0.297218] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297240] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299572] cpuidle: using governor menu [ 0.299940] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300377] ASID allocator initialised with 32768 entries [ 0.300630] Serial: AMBA PL011 UART driver [ 0.304168] Tegra reboot handler registered. [ 0.371590] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.371743] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.371961] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.372006] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.372136] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.372176] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.372296] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.372335] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372464] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372520] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.374772] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.374805] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.374832] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.374859] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.374888] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.374924] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.374954] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375002] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375025] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375065] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.375089] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.375128] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.375155] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.375178] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.375201] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.375225] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.375248] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.375347] mc-err: mcerr ops are set to t19x [ 0.388113] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.388141] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.388174] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.388186] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.395069] ACPI: Interpreter disabled. [ 0.396412] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.397778] iommu: Default domain type: Translated [ 0.397847] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.398223] SCSI subsystem initialized [ 0.398370] usbcore: registered new interface driver usbfs [ 0.398410] usbcore: registered new interface driver hub [ 0.398443] usbcore: registered new device driver usb [ 0.398970] mc: Linux media interface: v0.10 [ 0.399000] videodev: Linux video capture interface: v2.00 [ 0.399388] pps_core: LinuxPPS API ver. 1 registered [ 0.399401] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.399423] PTP clock support registered [ 0.399701] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.399999] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.400108] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.400851] Registered efivars operations [ 0.406905] FPGA manager framework [ 0.407017] Advanced Linux Sound Architecture Driver Initialized. [ 0.407647] Bluetooth: Core ver 2.22 [ 0.407704] NET: Registered protocol family 31 [ 0.407716] Bluetooth: HCI device and connection manager initialized [ 0.407731] Bluetooth: HCI socket layer initialized [ 0.407747] Bluetooth: L2CAP socket layer initialized [ 0.407784] Bluetooth: SCO socket layer initialized [ 0.409605] camchar: rtcpu character device driver loaded [ 0.410439] clocksource: Switched to clocksource arch_sys_counter [ 0.702316] VFS: Disk quotas dquot_6.6.0 [ 0.702428] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.702783] pnp: PnP ACPI: disabled [ 0.714424] la/ptsa driver initialized. [ 0.714558] NET: Registered protocol family 2 [ 0.714720] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.720152] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.720355] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.720774] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.721410] TCP: Hash tables configured (established 65536 bind 65536) [ 0.721644] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.721817] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722140] NET: Registered protocol family 1 [ 0.722863] RPC: Registered named UNIX socket transport module. [ 0.722883] RPC: Registered udp transport module. [ 0.722896] RPC: Registered tcp transport module. [ 0.722909] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.722937] PCI: CLS 0 bytes, default 64 [ 0.723255] Trying to unpack rootfs image as initramfs... [ 0.913842] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.916065] Freeing initrd memory: 8196K [ 0.920087] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.920127] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.920167] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.920521] kvm [1]: IPA Size Limit: 40 bits [ 0.921022] kvm [1]: vgic interrupt IRQ9 [ 0.921570] kvm [1]: VHE mode initialized successfully [ 0.922803] Initialise system trusted keyrings [ 0.923029] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.927851] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.928606] NFS: Registering the id_resolver key type [ 0.928633] Key type id_resolver registered [ 0.928643] Key type id_legacy registered [ 0.928705] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.928722] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.928748] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.937450] NET: Registered protocol family 38 [ 0.937472] Key type asymmetric registered [ 0.937484] Asymmetric key parser 'x509' registered [ 0.937552] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.937790] io scheduler mq-deadline registered [ 0.937802] io scheduler kyber registered [ 0.941772] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.943739] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.943798] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.943849] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.943898] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.943948] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.947409] scrncapt: init (heads:4 wins:6 planes:4) [ 0.947835] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.948374] EINJ: ACPI disabled. [ 0.950341] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.950392] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.950402] tegra-pmc: ### PMC reset level: L1 [ 0.950411] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.950467] tegra-pmc: PMC Prod config success [ 0.954140] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.957993] random: fast init done [ 0.958262] printk: console [ttyTCU0] enabled [ 2.510934] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.515452] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.520000] arm-smmu 10000000.iommu: stage 1 translation [ 2.525255] arm-smmu 10000000.iommu: stage 2 translation [ 2.531023] arm-smmu 10000000.iommu: nested translation [ 2.536109] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.543286] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.554276] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.556668] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.562966] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.571042] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.576266] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.580988] arm-smmu 12000000.iommu: stage 1 translation [ 2.586261] arm-smmu 12000000.iommu: stage 2 translation [ 2.591666] arm-smmu 12000000.iommu: nested translation [ 2.597350] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.604535] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.615149] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.617627] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.623952] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.631403] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.641274] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.644613] tegra_profiler: auth: init [ 2.648655] THERMAL EST: found 3 subdevs [ 2.652047] THERMAL EST num_resources: 0 [ 2.656146] [THERMAL EST subdev 0] [ 2.659214] [THERMAL EST subdev 1] [ 2.662882] [THERMAL EST subdev 2] [ 2.665877] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.672394] THERMAL EST: thz register success. [ 2.676598] THERMAL EST: end of probe, return err: 0 [ 2.682169] nvsciipc: loaded module [ 2.689384] tun: Universal TUN/TAP device driver, 1.6 [ 2.691662] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.697647] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.703193] e1000e: Intel(R) PRO/1000 Network Driver [ 2.708381] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.714201] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.719756] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.725978] PPP generic driver version 2.4.2 [ 2.730160] PPP BSD Compression module registered [ 2.734729] PPP Deflate Compression module registered [ 2.739978] PPP MPPE Compression module registered [ 2.744763] usbcore: registered new interface driver r8152 [ 2.750517] usbcore: registered new interface driver asix [ 2.755577] usbcore: registered new interface driver ax88179_178a [ 2.761706] usbcore: registered new interface driver cdc_ether [ 2.767923] usbcore: registered new interface driver net1080 [ 2.773509] usbcore: registered new interface driver cdc_subset [ 2.779294] usbcore: registered new interface driver zaurus [ 2.784988] usbcore: registered new interface driver cdc_ncm [ 2.790676] usbcore: registered new interface driver aqc111 [ 2.796311] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.802658] ohci-pci: OHCI PCI platform driver [ 2.806686] ohci-platform: OHCI generic platform driver [ 2.812506] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.819134] usbcore: registered new interface driver uas [ 2.823235] usbcore: registered new interface driver usb-storage [ 2.829343] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.835101] mousedev: PS/2 mouse device common for all mice [ 2.840139] usbcore: registered new interface driver xpad [ 2.848331] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.850879] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.858654] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.865169] i2c /dev entries driver [ 2.868786] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.874619] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.879823] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.885049] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.890468] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.895933] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.901350] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.913573] device-mapper: uevent: version 1.0.3 [ 2.913935] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.921238] cpuidle: Initializing cpuidle driver [ 2.925454] sdhci: Secure Digital Host Controller Interface driver [ 2.930460] sdhci: Copyright(c) Pierre Ossman [ 2.934564] Synopsys Designware Multimedia Card Interface Driver [ 2.940718] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.946813] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.947329] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.959794] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.978789] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.987723] vdd-1v0: supplied by regulator-dummy [ 2.993048] vdd-1v8-hs: supplied by regulator-dummy [ 2.997682] vdd-1v8-ls: supplied by regulator-dummy [ 3.002392] vdd-1v8-ao: supplied by regulator-dummy [ 3.006251] vddio-ddr-1v1: supplied by regulator-dummy [ 3.010581] vdd-rtc: supplied by regulator-dummy [ 3.012152] spmic-ldo1: supplied by regulator-dummy [ 3.013293] vdd-ao-3v3: supplied by regulator-dummy [ 3.019341] vddio-emmc-3v3: supplied by regulator-dummy [ 3.025521] spmic-ldo4: supplied by regulator-dummy [ 3.026705] vdd-usb-3v3: supplied by regulator-dummy [ 3.032736] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.038824] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.044280] spmic-ldo8: supplied by vdd-1v8-ls [ 3.045685] gpio-510 (gpio_default): hogged as output/high [ 3.046988] gpio-511 (gpio_default): hogged as output/high [ 3.053887] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.192325] max77686-rtc max77620-rtc: registered as rtc0 [ 3.193560] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.193856] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.915528] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.916591] hid: raw HID events driver (C) Jiri Kosina [ 3.917263] usbcore: registered new interface driver usbhid [ 3.917416] usbhid: USB HID core driver [ 3.919073] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.920191] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.958881] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.034432] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.361 ms) ÿá[ 4.005967] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.006681] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.007777] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.008557] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.010448] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.011192] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.011859] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.013183] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.013590] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.015714] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.021822] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.028250] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.033068] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.039560] denver_knobs_init:MTS_VERSION:55637613 [ 4.051369] t19x_cache tegra-cache: probed [ 4.054115] optee: probing for conduit method. [ 4.055122] optee: revision 3.16 (65cc2218) [ 4.056142] optee: dynamic shared memory is enabled [ 4.060285] optee: initialized driver [ 4.066513] nvpmodel: initialized successfully [ 4.067784] tegra_hv: get_hvd: not initialized yet [ 4.072590] user_ivc_mempool: hypervisor not present [ 4.079076] usbcore: registered new interface driver snd-usb-audio [ 4.085512] u32 classifier [ 4.086411] input device check on [ 4.090010] Actions configured [ 4.094163] Initializing XFRM netlink socket [ 4.098952] NET: Registered protocol family 10 [ 4.104852] Segment Routing with IPv6 [ 4.105922] NET: Registered protocol family 17 [ 4.110512] NET: Registered protocol family 15 [ 4.114601] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.128281] Bluetooth: RFCOMM socket layer initialized [ 4.132931] Bluetooth: RFCOMM ver 1.11 [ 4.137060] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.142639] Bluetooth: HIDP socket layer initialized [ 4.148594] 9pnet: Installing 9P2000 support [ 4.152330] Key type dns_resolver registered [ 4.157417] registered taskstats version 1 [ 4.160557] Loading compiled-in X.509 certificates [ 4.173043] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.176463] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.185847] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.188806] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.197244] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.205400] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.322415] tegra194-pcie 14160000.pcie: Link up [ 4.325200] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.325415] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.325598] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.325859] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.326059] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.326489] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.326926] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.335677] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.336307] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.336782] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.338324] pci 0004:01:00.0: supports D1 D2 [ 4.338739] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.346287] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.346748] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.346969] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.347420] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.347687] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.350844] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.356961] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.364313] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.373118] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.383175] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.388012] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.393070] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.400029] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.408569] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.410877] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.419527] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.427793] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.543091] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.543776] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.543993] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.544142] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.544389] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.544638] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.545026] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.545484] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.559882] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.560170] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.561899] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.563409] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.564936] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.566229] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.567178] pci 0005:00:00.0: Removing from iommu group 7 [ 5.567522] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.596066] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.616636] host1x 13e10000.host1x: initialized [ 5.618472] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.619381] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.620510] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.621194] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.622146] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.622902] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.623913] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.626568] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.636497] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.643169] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.653336] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.660159] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.670130] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.677344] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.687218] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.694121] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.703937] falcon 15340000.vic: Adding to iommu group 17 [ 5.718094] falcon 15340000.vic: initialized [ 5.719024] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.723799] falcon 15380000.nvjpg: initialized [ 5.724379] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.736357] falcon 154c0000.nvenc: initialized [ 5.736983] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.747491] falcon 15a80000.nvenc1: initialized [ 5.748305] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.760209] nvdec 15480000.nvdec: initialized [ 5.760898] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.770550] nvdec 15140000.nvdec1: initialized [ 5.771140] tsec 15500000.tsec: Adding to iommu group 18 [ 5.776131] tsec 15500000.tsec: initialized [ 5.776649] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.784178] tsec 15100000.tsecb: initialized [ 5.788020] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.813277] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.826668] gpio-374 (wifi-enable): hogged as output/high [ 5.826985] gpio-431 (camera-control-output-low): hogged as output/low [ 5.827260] gpio-432 (camera-control-output-low): hogged as output/low [ 5.828951] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.830728] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.831428] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.835229] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.840995] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.846742] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.852434] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.860404] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.868040] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.879064] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.884227] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.890170] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.899284] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.908434] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.916020] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.923115] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.929501] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.939432] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.945280] pva 16000000.pva0: Adding to iommu group 22 [ 5.972325] pva 16000000.pva0: initialized [ 5.977496] pva 16800000.pva1: Adding to iommu group 23 [ 5.988760] pva 16800000.pva1: initialized [ 5.993936] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.007197] nvdla 15880000.nvdla0: initialized [ 6.008638] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.017390] nvdla 158c0000.nvdla1: initialized [ 6.020007] tegradc 15200000.display: Adding to iommu group 26 [ 6.028189] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.028513] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.030234] tegradc 15210000.display: Adding to iommu group 26 [ 6.031528] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.032307] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.032533] tegra_cec 3960000.tegra_cec: probed [ 6.033441] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.033919] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.038843] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.039003] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.043863] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.050951] kfuse 3830000.kfuse: initialized [ 6.057762] tegradccommon 15200000.display-hub: dma mapping done [ 6.062930] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.074545] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.081345] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.087571] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.097001] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.102193] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.111429] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.116859] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.137223] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.137613] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.140425] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.148246] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.157208] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.163417] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.171145] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.178339] usb usb1: Product: xHCI Host Controller [ 6.183541] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.189878] usb usb1: SerialNumber: 3610000.xhci [ 6.195396] hub 1-0:1.0: USB hub found [ 6.198141] hub 1-0:1.0: 4 ports detected [ 6.202856] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.207546] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.215400] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.223100] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.230977] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.238220] usb usb2: Product: xHCI Host Controller [ 6.242945] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.249155] usb usb2: SerialNumber: 3610000.xhci [ 6.254620] hub 2-0:1.0: USB hub found [ 6.257609] hub 2-0:1.0: 4 ports detected [ 6.299692] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.305320] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.306587] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.306733] random: crng init done [ 6.306744] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.319947] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.321008] tegra194-cpufreq ccplex: probed with BWMGR [ 6.322202] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.322652] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.323080] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.325337] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.334893] mmc0: CQHCI version 5.10 [ 6.336167] tegra194-vi5 15c10000.vi: initialized [ 6.339639] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.343469] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.344997] generic_infoframe_type: 0x87 [ 6.351545] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.355106] tegradc 15200000.display: DT parsed successfully [ 6.363325] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.369023] tegradc 15200000.display: Display dc.00000000df0b0791 registered with id=0 [ 6.375598] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.390174] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.390994] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.396681] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.397403] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.402407] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.402415] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.402420] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.404773] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.447362] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.447702] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.455935] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.468787] nvethernet 2490000.ethernet: Macsec not supported [ 6.468895] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.478396] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.481786] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.487464] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.500251] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.507744] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.513784] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.519934] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.529342] tegradc 15200000.display: probed [ 6.534474] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.547350] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.553677] tegra-se-nvhost 15810000.se: initialized [ 6.562752] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.563529] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.570055] tegra-se-nvhost 15820000.se: initialized [ 6.576223] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.581043] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.584074] mmc0: Command Queue Engine enabled [ 6.587277] tegra-se-nvhost 15830000.se: initialized [ 6.591274] mmc0: periodic cache flush enabled [ 6.591293] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.597442] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.601260] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.607494] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.613342] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.631536] Console: switching to colour frame buffer device 240x67 [ 6.631941] tegra-se-nvhost 15840000.se: initialized [ 6.637314] tegradc 15200000.display: fb registered [ 6.637387] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.642652] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.643927] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.645404] tegra_actmon d230000.actmon: in actmon_register()... [ 6.645567] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.645885] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.646503] hvc_sysfs: hypervisor is not present [ 6.673086] ALSA device list: [ 6.694076] No soundcards found. [ 6.694705] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.703710] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.707069] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.717832] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.724899] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.729622] usb 1-2: Manufacturer: Generic [ 6.736068] hub 1-2:1.0: USB hub found [ 6.739012] hub 1-2:1.0: 4 ports detected [ 6.764382] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.765677] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.765879] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.767315] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.773720] Extcon AUX1(HDMI) enable [ 6.777475] tegradc 15210000.display: disp1 connected to head1->sor [ 6.783524] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.790952] tegradc 15210000.display: DT parsed successfully [ 6.796417] tegradc 15210000.display: Display dc.0000000030d8d844 registered with id=1 [ 6.804379] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.810403] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.823315] tegradc 15210000.display: probed [ 6.823330] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.828359] tegradc 15210000.display: fb registered [ 6.836636] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.840750] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.842733] Freeing unused kernel memory: 3968K [ 6.848534] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.858791] tegradc 15210000.display: blank - powerdown [ 6.863957] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.867652] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.870550] Run /init as init process [ 6.872152] Extcon DP: HPD disabled [ 6.872157] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.872194] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.880121] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.880126] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.880130] usb 2-3: Manufacturer: Generic [ 6.891050] hub 2-3:1.0: USB hub found [ 6.894036] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.902067] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.938833] tegradc 15200000.display: blank - powerdown [ 6.981440] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.981446] Extcon AUX1(HDMI) disable [ 6.982486] Root device found: mmcblk0p1 [ 6.984519] Found dev node: /dev/mmcblk0p1 [ 6.990421] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.004912] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.005753] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.018947] tegradc 15200000.display: unblank [ 7.020048] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.020262] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.020464] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.024004] Rootfs mounted over mmcblk0p1 [ 7.027490] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.029343] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.033320] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.033324] Extcon AUX1(HDMI) enable [ 7.046108] tegradc 15200000.display: sync windows ret = 247 [ 7.048542] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.052783] Switching from initrd to actual rootfs [ 7.079494] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.081032] Extcon HDMI: HPD enabled [ 7.082828] tegradc 15200000.display: hdmi: plugged [ 7.113088] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.114580] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.139631] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.141099] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.142514] usb 1-3: Product: Bluetooth Radio [ 7.143844] usb 1-3: Manufacturer: Realtek [ 7.145137] usb 1-3: SerialNumber: 00e04c000001 [ 7.243665] systemd[1]: System time before build time, advancing clock. [ 7.314486] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.319453] systemd[1]: Detected architecture arm64. [ 7.364472] systemd[1]: Set hostname to . [ 7.518474] systemd-sysv-generator[240]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.865885] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.867676] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.873107] systemd[1]: Created slice system-modprobe.slice. [ 7.877907] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.882116] systemd[1]: Created slice User and Session Slice. [ 7.885677] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.889924] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.893348] systemd[1]: Reached target User and Group Name Lookups. [ 7.896675] systemd[1]: Reached target Slices. [ 7.899891] systemd[1]: Reached target Swap. [ 7.903991] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.907706] systemd[1]: Listening on Syslog Socket. [ 7.911381] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.914859] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.919145] systemd[1]: Listening on Journal Audit Socket. [ 7.923194] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.929291] systemd[1]: Listening on Journal Socket. [ 7.933074] systemd[1]: Listening on udev Control Socket. [ 7.936703] systemd[1]: Listening on udev Kernel Socket. [ 7.945110] systemd[1]: Mounting Huge Pages File System... [ 7.953394] systemd[1]: Mounting POSIX Message Queue File System... [ 7.961290] systemd[1]: Mounting RPC Pipe File System... [ 7.969887] systemd[1]: Mounting Kernel Debug File System... [ 7.978742] systemd[1]: Mounting Kernel Trace File System... [ 7.988947] systemd[1]: Starting Journal Service... [ 7.997972] systemd[1]: Starting Set the console keyboard layout... [ 8.006172] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.009814] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.016361] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.025659] systemd[1]: Started Nameserver information manager. [ 8.030518] systemd[1]: Reached target Network (Pre). [ 8.038605] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.040572] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.047170] systemd[1]: Starting Load Kernel Modules... [ 8.054860] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.062768] systemd[1]: Starting udev Coldplug all Devices... [ 8.073567] systemd[1]: Mounted Huge Pages File System. [ 8.077457] systemd[1]: Mounted POSIX Message Queue File System. [ 8.081502] systemd[1]: Mounted RPC Pipe File System. [ 8.082223] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.089375] systemd[1]: Mounted Kernel Debug File System. [ 8.090924] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.091345] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.094005] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.094018] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.094023] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.094275] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.096828] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.102107] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.102120] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.107091] systemd[1]: Mounted Kernel Trace File System. [ 8.113315] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.119934] systemd[1]: nvfb-udev.service: Succeeded. [ 8.125659] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.137803] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.149702] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.151503] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.159147] systemd[1]: Starting Load/Save Random Seed... [ 8.166984] systemd[1]: Starting Create System Users... [ 8.198655] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.198655] [ 8.213311] systemd[1]: Finished Load/Save Random Seed. [ 8.225154] systemd[1]: Finished Create System Users. [ 8.231856] systemd[1]: Finished Load Kernel Modules. [ 8.236117] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.242731] systemd[1]: Mounting Kernel Configuration File System... [ 8.251943] systemd[1]: Started OP-TEE Client Supplicant. [ 8.260563] systemd[1]: Starting Apply Kernel Variables... [ 8.268662] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.278721] systemd[1]: Finished Set the console keyboard layout. [ 8.284209] systemd[1]: Mounted Kernel Configuration File System. [ 9.660437] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.667675] imx219 9-0010: board setup failed [ 9.668960] imx219: probe of 9-0010 failed with error -121 [ 9.681294] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.687898] imx219 10-0010: board setup failed [ 9.689171] imx219: probe of 10-0010 failed with error -121 [ 9.774699] hot-surface-alert cooling state: 0 -> 1 [ 10.579948] using random self ethernet address [ 10.581352] using random host ethernet address [ 11.375084] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.376284] Creating 1 MTD partitions on "spi6.0": [ 11.376291] 0x000000000000-0x000002000000 : "Whole_flash0" [ 11.936718] using random self ethernet address [ 11.938229] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.854059] nvidia: loading out-of-tree module taints kernel. [ 58.835990] watchdog: watchdog0: watchdog did not stop! [ 59.295365] Trying to unregister non-registered hwtime source [ 62.357271] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.358771] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.606] I> retrieved tmds range from prod_list_hdmi_soc [0003.611] E> invalid display type [0003.612] E> cannot find any other nvdisp nodes [0003.628] I> edid read success [0003.641] I> edid read success [0003.641] I> width = 640, height = 480, frequency = 25174825 [0003.641] I> width = 1920, height = 1080, frequency = 148500000 [0003.642] I> width = 1280, height = 768, frequency = 79500000 [0003.642] I> width = 1360, height = 768, frequency = 85500000 [0003.642] I> width = 720, height = 480, frequency = 26973026 [0003.646] I> width = 720, height = 576, frequency = 26973026 [0003.652] I> width = 1280, height = 720, frequency = 74175824 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1920, height = 1080, frequency = 148351648 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 720, height = 480, frequency = 26973026 [0003.680] I> width = 720, height = 576, frequency = 26973026 [0003.686] I> width = 3840, height = 2160, frequency = 296703296 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 4096, height = 2160, frequency = 296703296 [0003.715] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.726] I> hdmi_enable, starting HDMI initialisation [0003.731] I> hdmi_enable, HDMI initialisation complete [0003.740] initializing target [0003.741] calling apps_init() [0003.742] starting app kernel_boot_app [0003.743] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000670] Console: colour dummy device 80x25 [ 0.002225] printk: console [tty0] enabled [ 0.002285] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002321] pid_max: default: 32768 minimum: 301 [ 0.002582] LSM: Security Framework initializing [ 0.002641] Yama: becoming mindful. [ 0.002686] SELinux: Initializing. [ 0.002891] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002929] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006274] rcu: Hierarchical SRCU implementation. [ 0.006522] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007510] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007549] DTB Build time: Aug 10 2022 20:31:49 [ 0.010752] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010994] Remapping and enabling EFI services. [ 0.013660] smp: Bringing up secondary CPUs ... [ 0.043345] Detected PIPT I-cache on CPU1 [ 0.043500] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.076237] Detected PIPT I-cache on CPU2 [ 0.076395] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.106006] Detected PIPT I-cache on CPU3 [ 0.106150] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135941] Detected PIPT I-cache on CPU4 [ 0.136144] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165934] Detected PIPT I-cache on CPU5 [ 0.166092] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166466] smp: Brought up 1 node, 6 CPUs [ 0.166644] SMP: Total of 6 processors activated. [ 0.166713] CPU features: detected: Privileged Access Never [ 0.166750] CPU features: detected: LSE atomic instructions [ 0.166763] CPU features: detected: User Access Override [ 0.166776] CPU features: detected: 32-bit EL0 Support [ 0.166787] CPU features: detected: RAS Extension Support [ 0.166799] CPU features: detected: CRC32 instructions [ 0.166810] CPU features: detected: 32-bit EL1 Support [ 0.234318] CPU: All CPU(s) started at EL2 [ 0.240150] devtmpfs: initialized [ 0.286077] Registered cp15_barrier emulation handler [ 0.286219] Registered setend emulation handler [ 0.286239] KASLR enabled [ 0.286496] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286521] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287826] pinctrl core: initialized pinctrl subsystem [ 0.288847] SMBIOS 3.0.0 present. [ 0.288887] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289491] NET: Registered protocol family 16 [ 0.291511] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292013] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292701] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292760] audit: initializing netlink subsys (disabled) [ 0.293044] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293560] thermal_sys: Registered thermal governor 'step_wise' [ 0.293567] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293582] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.297051] cpuidle: using governor menu [ 0.297548] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297942] ASID allocator initialised with 32768 entries [ 0.298206] Serial: AMBA PL011 UART driver [ 0.301712] Tegra reboot handler registered. [ 0.378925] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.379085] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.379273] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.379324] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.379444] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.379487] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.379619] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.379665] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.379788] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.379830] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.382185] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.382223] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.382254] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.382281] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.382311] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.382337] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.382373] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.382427] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.382457] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.382497] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.382522] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.382558] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.382582] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.382605] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.382629] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.382654] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.382711] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.382813] mc-err: mcerr ops are set to t19x [ 0.395434] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.395456] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.395468] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.395482] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.402865] ACPI: Interpreter disabled. [ 0.404013] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.405207] iommu: Default domain type: Translated [ 0.405264] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.405643] SCSI subsystem initialized [ 0.405818] usbcore: registered new interface driver usbfs [ 0.405859] usbcore: registered new interface driver hub [ 0.405895] usbcore: registered new device driver usb [ 0.406265] mc: Linux media interface: v0.10 [ 0.406295] videodev: Linux video capture interface: v2.00 [ 0.406643] pps_core: LinuxPPS API ver. 1 registered [ 0.406654] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.406674] PTP clock support registered [ 0.407007] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.407267] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.407350] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.407920] Registered efivars operations [ 0.413408] FPGA manager framework [ 0.413511] Advanced Linux Sound Architecture Driver Initialized. [ 0.414088] Bluetooth: Core ver 2.22 [ 0.414126] NET: Registered protocol family 31 [ 0.414158] Bluetooth: HCI device and connection manager initialized [ 0.414176] Bluetooth: HCI socket layer initialized [ 0.414192] Bluetooth: L2CAP socket layer initialized [ 0.414229] Bluetooth: SCO socket layer initialized [ 0.415748] camchar: rtcpu character device driver loaded [ 0.416369] clocksource: Switched to clocksource arch_sys_counter [ 0.718040] VFS: Disk quotas dquot_6.6.0 [ 0.718129] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.718476] pnp: PnP ACPI: disabled [ 0.730873] la/ptsa driver initialized. [ 0.731009] NET: Registered protocol family 2 [ 0.731169] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.736166] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.736233] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.736563] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.736996] TCP: Hash tables configured (established 65536 bind 65536) [ 0.737116] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.737209] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.737420] NET: Registered protocol family 1 [ 0.738067] RPC: Registered named UNIX socket transport module. [ 0.738083] RPC: Registered udp transport module. [ 0.738093] RPC: Registered tcp transport module. [ 0.738102] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.738117] PCI: CLS 0 bytes, default 64 [ 0.738365] Trying to unpack rootfs image as initramfs... [ 0.926787] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.929164] Freeing initrd memory: 8196K [ 0.933300] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.933368] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.933429] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.933876] kvm [1]: IPA Size Limit: 40 bits [ 0.934486] kvm [1]: vgic interrupt IRQ9 [ 0.935101] kvm [1]: VHE mode initialized successfully [ 0.936814] Initialise system trusted keyrings [ 0.937206] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.943621] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.944649] NFS: Registering the id_resolver key type [ 0.944690] Key type id_resolver registered [ 0.944705] Key type id_legacy registered [ 0.944796] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.944819] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.944857] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.954619] NET: Registered protocol family 38 [ 0.954641] Key type asymmetric registered [ 0.954684] Asymmetric key parser 'x509' registered [ 0.954741] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.955030] io scheduler mq-deadline registered [ 0.955079] io scheduler kyber registered [ 0.961371] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.964529] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.964609] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.964708] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.964800] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.964903] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.971205] scrncapt: init (heads:4 wins:6 planes:4) [ 0.971428] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.972529] EINJ: ACPI disabled. [ 0.976081] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.976109] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.976151] tegra-pmc: ### PMC reset level: L1 [ 0.976164] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.976213] tegra-pmc: PMC Prod config success [ 0.981673] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.992872] random: fast init done [ 0.998638] printk: console [ttyTCU0] enabled [ 2.538975] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.543892] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.548120] arm-smmu 10000000.iommu: stage 1 translation [ 2.553898] arm-smmu 10000000.iommu: stage 2 translation [ 2.559398] arm-smmu 10000000.iommu: nested translation [ 2.564492] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.571915] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.581970] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.584801] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.591601] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.598752] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.604641] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.609363] arm-smmu 12000000.iommu: stage 1 translation [ 2.614620] arm-smmu 12000000.iommu: stage 2 translation [ 2.620296] arm-smmu 12000000.iommu: nested translation [ 2.625730] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.632653] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.642885] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.645780] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.652334] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.659936] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.669892] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.673049] tegra_profiler: auth: init [ 2.676952] THERMAL EST: found 3 subdevs [ 2.680431] THERMAL EST num_resources: 0 [ 2.684527] [THERMAL EST subdev 0] [ 2.687836] [THERMAL EST subdev 1] [ 2.691003] [THERMAL EST subdev 2] [ 2.694506] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.700952] THERMAL EST: thz register success. [ 2.705206] THERMAL EST: end of probe, return err: 0 [ 2.710469] nvsciipc: loaded module [ 2.716864] tun: Universal TUN/TAP device driver, 1.6 [ 2.719937] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.726018] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.731827] e1000e: Intel(R) PRO/1000 Network Driver [ 2.736504] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.742570] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.748156] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.754264] PPP generic driver version 2.4.2 [ 2.758553] PPP BSD Compression module registered [ 2.762863] PPP Deflate Compression module registered [ 2.768109] PPP MPPE Compression module registered [ 2.773367] usbcore: registered new interface driver r8152 [ 2.778910] usbcore: registered new interface driver asix [ 2.784203] usbcore: registered new interface driver ax88179_178a [ 2.790071] usbcore: registered new interface driver cdc_ether [ 2.796297] usbcore: registered new interface driver net1080 [ 2.801910] usbcore: registered new interface driver cdc_subset [ 2.807707] usbcore: registered new interface driver zaurus [ 2.813392] usbcore: registered new interface driver cdc_ncm [ 2.819306] usbcore: registered new interface driver aqc111 [ 2.824729] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.830773] ohci-pci: OHCI PCI platform driver [ 2.835095] ohci-platform: OHCI generic platform driver [ 2.841141] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.847133] usbcore: registered new interface driver uas [ 2.851629] usbcore: registered new interface driver usb-storage [ 2.857448] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.863495] mousedev: PS/2 mouse device common for all mice [ 2.868777] usbcore: registered new interface driver xpad [ 2.876548] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.879239] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.887308] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.893504] i2c /dev entries driver [ 2.897131] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.902639] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.908212] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.913657] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.918725] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.924259] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.929934] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.942809] device-mapper: uevent: version 1.0.3 [ 2.943217] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.949805] cpuidle: Initializing cpuidle driver [ 2.953837] sdhci: Secure Digital Host Controller Interface driver [ 2.959122] sdhci: Copyright(c) Pierre Ossman [ 2.963213] Synopsys Designware Multimedia Card Interface Driver [ 2.969103] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.975437] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.976067] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.988469] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.005829] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.014828] vdd-1v0: supplied by regulator-dummy [ 3.020324] vdd-1v8-hs: supplied by regulator-dummy [ 3.025168] vdd-1v8-ls: supplied by regulator-dummy [ 3.029833] vdd-1v8-ao: supplied by regulator-dummy [ 3.033591] vddio-ddr-1v1: supplied by regulator-dummy [ 3.037943] vdd-rtc: supplied by regulator-dummy [ 3.039540] spmic-ldo1: supplied by regulator-dummy [ 3.040700] vdd-ao-3v3: supplied by regulator-dummy [ 3.046822] vddio-emmc-3v3: supplied by regulator-dummy [ 3.052935] spmic-ldo4: supplied by regulator-dummy [ 3.054085] vdd-usb-3v3: supplied by regulator-dummy [ 3.060166] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.066240] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.071616] spmic-ldo8: supplied by vdd-1v8-ls [ 3.072986] gpio-510 (gpio_default): hogged as output/high [ 3.075372] gpio-511 (gpio_default): hogged as output/high [ 3.081998] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.220331] max77686-rtc max77620-rtc: registered as rtc0 [ 3.221302] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.221584] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.928065] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.929148] hid: raw HID events driver (C) Jiri Kosina [ 3.929871] usbcore: registered new interface driver usbhid [ 3.930017] usbhid: USB HID core driver [ 3.931718] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.932889] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.730811] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.806209] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.209 ms) ÿá[ 4.017878] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.018412] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.019325] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.020195] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.022060] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.022610] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.023130] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.024580] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.024885] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.026640] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.034729] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.040753] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.046014] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.053409] denver_knobs_init:MTS_VERSION:55637613 [ 4.065487] t19x_cache tegra-cache: probed [ 4.070237] optee: probing for conduit method. [ 4.071131] optee: revision 3.16 (65cc2218) [ 4.072476] optee: dynamic shared memory is enabled [ 4.073697] optee: initialized driver [ 4.079785] nvpmodel: initialized successfully [ 4.080808] tegra_hv: get_hvd: not initialized yet [ 4.085099] user_ivc_mempool: hypervisor not present [ 4.091127] usbcore: registered new interface driver snd-usb-audio [ 4.097823] u32 classifier [ 4.099128] input device check on [ 4.102857] Actions configured [ 4.106274] Initializing XFRM netlink socket [ 4.111078] NET: Registered protocol family 10 [ 4.118205] Segment Routing with IPv6 [ 4.118557] NET: Registered protocol family 17 [ 4.123088] NET: Registered protocol family 15 [ 4.127363] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.141160] Bluetooth: RFCOMM socket layer initialized [ 4.145459] Bluetooth: RFCOMM ver 1.11 [ 4.149580] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.155171] Bluetooth: HIDP socket layer initialized [ 4.161398] 9pnet: Installing 9P2000 support [ 4.164670] Key type dns_resolver registered [ 4.170338] registered taskstats version 1 [ 4.173128] Loading compiled-in X.509 certificates [ 4.186382] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.188944] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.199348] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.201043] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.209815] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.217923] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.332554] tegra194-pcie 14160000.pcie: Link up [ 4.335562] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.335809] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.335963] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.336169] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.336429] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.336793] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.337251] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.349567] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.350080] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.350560] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.352055] pci 0004:01:00.0: supports D1 D2 [ 4.352182] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.363139] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.363457] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.363751] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.364222] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.364583] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.364887] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.367076] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.374515] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.383283] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.393250] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.397942] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.403685] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.410476] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.419574] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.420982] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.429718] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.437901] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.553403] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.553911] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.554124] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.554293] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.554542] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.554710] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.555181] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.555726] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.575605] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.575913] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.577468] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.578639] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.580302] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.581972] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.582836] pci 0005:00:00.0: Removing from iommu group 7 [ 5.583368] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.619327] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.643880] host1x 13e10000.host1x: initialized [ 5.645700] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.646533] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.647726] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.648489] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.649766] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.650391] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.651481] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.652032] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.653147] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.653758] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.663737] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.670367] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.680189] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.687217] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.697494] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.704471] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.714258] falcon 15340000.vic: Adding to iommu group 17 [ 5.729994] falcon 15340000.vic: initialized [ 5.731183] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.736633] falcon 15380000.nvjpg: initialized [ 5.737270] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.747624] falcon 154c0000.nvenc: initialized [ 5.748264] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.758190] falcon 15a80000.nvenc1: initialized [ 5.759047] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.771145] nvdec 15480000.nvdec: initialized [ 5.771862] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.781039] nvdec 15140000.nvdec1: initialized [ 5.781622] tsec 15500000.tsec: Adding to iommu group 18 [ 5.787592] tsec 15500000.tsec: initialized [ 5.788066] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.794558] tsec 15100000.tsecb: initialized [ 5.798618] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.825771] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.837923] gpio-374 (wifi-enable): hogged as output/high [ 5.838249] gpio-431 (camera-control-output-low): hogged as output/low [ 5.838658] gpio-432 (camera-control-output-low): hogged as output/low [ 5.840710] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.843111] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.843843] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.845968] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.851498] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.856774] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.862626] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.870891] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.878035] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.889761] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.894466] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.900516] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.909319] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.918566] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.925720] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.933352] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.939857] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.949276] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.955526] pva 16000000.pva0: Adding to iommu group 22 [ 5.983083] pva 16000000.pva0: initialized [ 5.987912] pva 16800000.pva1: Adding to iommu group 23 [ 5.999511] pva 16800000.pva1: initialized [ 6.003831] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.017535] nvdla 15880000.nvdla0: initialized [ 6.019006] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.027659] nvdla 158c0000.nvdla1: initialized [ 6.031913] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.031986] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.032209] tegradc 15200000.display: Adding to iommu group 26 [ 6.032239] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.032650] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.033194] tegradccommon 15200000.display-hub: dma mapping done [ 6.034555] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.039793] tegradc 15210000.display: Adding to iommu group 26 [ 6.039820] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.039937] generic_infoframe_type: 0x87 [ 6.040167] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.040725] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.040734] tegra_cec 3960000.tegra_cec: probed [ 6.041570] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.043685] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.044127] kfuse 3830000.kfuse: initialized [ 6.044994] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.045003] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.046035] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.051938] tegradc 15200000.display: DT parsed successfully [ 6.056841] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.061488] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.069143] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.076702] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.078419] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.083999] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.084009] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.084944] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.091136] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.095276] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.096896] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.103051] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.111304] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.127000] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.131188] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.135859] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.135943] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.146663] tegradc 15210000.display: disp0 connected to head1->sor [ 6.154225] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.161436] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.169553] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.175274] tegradc 15210000.display: DT parsed successfully [ 6.182423] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.187633] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.294136] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.301323] usb usb1: Product: xHCI Host Controller [ 6.306248] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.312516] usb usb1: SerialNumber: 3610000.xhci [ 6.318867] hub 1-0:1.0: USB hub found [ 6.321550] hub 1-0:1.0: 4 ports detected [ 6.326401] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.331076] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.338497] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.345979] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.354189] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.361476] usb usb2: Product: xHCI Host Controller [ 6.366141] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.372334] usb usb2: SerialNumber: 3610000.xhci [ 6.378005] hub 2-0:1.0: USB hub found [ 6.380860] hub 2-0:1.0: 4 ports detected [ 6.424807] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.431049] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.432692] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.432891] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.446025] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.447091] tegra194-cpufreq ccplex: probed with BWMGR [ 6.448340] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.448797] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.449261] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.450639] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.458102] tegra194-vi5 15c10000.vi: initialized [ 6.459128] mmc0: CQHCI version 5.10 [ 6.459762] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.461287] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.464930] generic_infoframe_type: 0x87 [ 6.471139] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.475092] tegradc 15200000.display: DT parsed successfully [ 6.483180] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.483189] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.488402] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.488758] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.495293] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.502827] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.509793] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.517756] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.532463] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.538825] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.539210] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.547237] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.553633] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.561490] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.562793] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.567947] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.584449] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.606526] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.613058] nvethernet 2490000.ethernet: Macsec not supported [ 6.620377] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.635358] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.636094] tegradc 15200000.display: probed [ 6.642713] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.651971] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.658896] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.667114] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.673588] tegra-se-nvhost 15810000.se: initialized [ 6.676797] mmc0: Command Queue Engine enabled [ 6.680954] mmc0: periodic cache flush enabled [ 6.682060] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.685713] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.692252] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.699062] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.705572] tegra-se-nvhost 15820000.se: initialized [ 6.709467] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.716245] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.727987] Console: switching to colour frame buffer device 240x67 [ 6.728230] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.733049] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.733894] tegradc 15200000.display: fb registered [ 6.740556] tegra-se-nvhost 15830000.se: initialized [ 6.748207] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.754139] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.770287] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.770407] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.781605] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.782323] tegra-se-nvhost 15840000.se: initialized [ 6.794697] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.800521] tegra_actmon d230000.actmon: in actmon_register()... [ 6.805221] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.810471] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.810792] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.818769] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.827223] hvc_sysfs: hypervisor is not present [ 6.834151] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.834156] usb 1-2: Manufacturer: Generic [ 6.848598] hub 1-2:1.0: USB hub found [ 6.852862] hub 1-2:1.0: 4 ports detected [ 6.862674] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.874715] ALSA device list: [ 6.874829] No soundcards found. [ 6.875858] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.878798] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.887230] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.893483] Extcon AUX1(HDMI) enable [ 6.897304] tegradc 15210000.display: disp1 connected to head1->sor [ 6.903714] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.910788] tegradc 15210000.display: DT parsed successfully [ 6.916422] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.921309] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.924320] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.937569] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.951000] tegradc 15210000.display: probed [ 6.951332] tegradc 15210000.display: fb registered [ 6.956511] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.960465] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.960616] Freeing unused kernel memory: 3968K [ 6.968698] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.976689] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.986787] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.986791] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.986795] usb 2-3: Manufacturer: Generic [ 6.986811] tegradc 15210000.display: blank - powerdown [ 6.987026] Run /init as init process [ 6.993936] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.993940] Extcon DP: HPD disabled [ 6.993943] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.993952] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.993956] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.040418] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.049573] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.057848] hub 2-3:1.0: USB hub found ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.059170] tegradc 15200000.display: blank - powerdown [ 7.060800] hub 2-3:1.0: 4 ports detected [ 7.096451] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.096467] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.096471] Extcon AUX1(HDMI) disable [ 7.115327] Root device found: mmcblk0p1 [ 7.117535] Found dev node: /dev/mmcblk0p1 [ 7.119745] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.120715] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.134352] tegradc 15200000.display: unblank [ 7.135448] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.135648] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.141589] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.143517] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.147514] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.147518] Extcon AUX1(HDMI) enable [ 7.152018] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.155820] Rootfs mounted over mmcblk0p1 [ 7.160298] tegradc 15200000.display: sync windows ret = 247 [ 7.184200] Switching from initrd to actual rootfs [ 7.199027] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.200753] Extcon HDMI: HPD enabled [ 7.202280] tegradc 15200000.display: hdmi: plugged [ 7.245681] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.247320] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.248873] usb 1-3: Product: Bluetooth Radio [ 7.250308] usb 1-3: Manufacturer: Realtek [ 7.251692] usb 1-3: SerialNumber: 00e04c000001 [ 7.314729] random: crng init done [ 7.370643] systemd[1]: System time before build time, advancing clock. [ 7.440798] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.445905] systemd[1]: Detected architecture arm64. [ 7.483789] systemd[1]: Set hostname to . [ 7.649000] systemd-sysv-generator[253]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.997427] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.999168] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.004594] systemd[1]: Created slice system-modprobe.slice. [ 8.009226] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.013633] systemd[1]: Created slice User and Session Slice. [ 8.017097] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.021297] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.024706] systemd[1]: Reached target User and Group Name Lookups. [ 8.027928] systemd[1]: Reached target Slices. [ 8.031239] systemd[1]: Reached target Swap. [ 8.035323] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.039009] systemd[1]: Listening on Syslog Socket. [ 8.042677] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.046218] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.050578] systemd[1]: Listening on Journal Audit Socket. [ 8.054313] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.058148] systemd[1]: Listening on Journal Socket. [ 8.061966] systemd[1]: Listening on udev Control Socket. [ 8.065490] systemd[1]: Listening on udev Kernel Socket. [ 8.073572] systemd[1]: Mounting Huge Pages File System... [ 8.081832] systemd[1]: Mounting POSIX Message Queue File System... [ 8.090039] systemd[1]: Mounting RPC Pipe File System... [ 8.098448] systemd[1]: Mounting Kernel Debug File System... [ 8.106711] systemd[1]: Mounting Kernel Trace File System... [ 8.117812] systemd[1]: Starting Journal Service... [ 8.126650] systemd[1]: Starting Set the console keyboard layout... [ 8.134773] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.138350] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.144935] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.152852] systemd[1]: Started Nameserver information manager. [ 8.157459] systemd[1]: Reached target Network (Pre). [ 8.164442] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.166316] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.173062] systemd[1]: Starting Load Kernel Modules... [ 8.180665] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.189623] systemd[1]: Starting udev Coldplug all Devices... [ 8.199660] systemd[1]: Mounted Huge Pages File System. [ 8.203499] systemd[1]: Mounted POSIX Message Queue File System. [ 8.207111] systemd[1]: Mounted RPC Pipe File System. [ 8.208952] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.215602] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.215704] systemd[1]: Mounted Kernel Debug File System. [ 8.217553] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.220047] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.220059] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.220063] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.220384] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.224657] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.227490] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.227503] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.235596] systemd[1]: Mounted Kernel Trace File System. [ 8.244819] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.251406] systemd[1]: nvfb-udev.service: Succeeded. [ 8.256160] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.268729] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.281847] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.283656] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.291209] systemd[1]: Starting Load/Save Random Seed... [ 8.298978] systemd[1]: Starting Create System Users... [ 8.323272] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.323272] [ 8.350535] systemd[1]: Finished Load/Save Random Seed. [ 8.360291] systemd[1]: Finished Load Kernel Modules. [ 8.371202] systemd[1]: Finished Create System Users. [ 8.375633] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.382937] systemd[1]: Mounting Kernel Configuration File System... [ 8.391178] systemd[1]: Started OP-TEE Client Supplicant. [ 8.399307] systemd[1]: Starting Apply Kernel Variables... [ 8.407110] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.417597] systemd[1]: Finished Set the console keyboard layout. [ 8.423078] systemd[1]: Mounted Kernel Configuration File System. [ 9.809205] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.819565] imx219 9-0010: board setup failed [ 9.820915] imx219: probe of 9-0010 failed with error -121 [ 9.832927] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.839301] imx219 10-0010: board setup failed [ 9.840554] imx219: probe of 10-0010 failed with error -121 [ 9.903638] hot-surface-alert cooling state: 0 -> 1 [ 10.739445] using random self ethernet address [ 10.741652] using random host ethernet address [ 11.402276] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.403933] Creating 1 MTD partitions on "spi6.0": [ 11.412484] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.063178] using random self ethernet address [ 12.064801] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.770911] nvidia: loading out-of-tree module taints kernel. [ 59.398310] watchdog: watchdog0: watchdog did not stop! [ 59.868058] Trying to unregister non-registered hwtime source [ 62.928664] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.930502] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxswÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> hdmi cable connected [0003.600] W> set volts not configured for 'vdd-1v0' [0003.604] W> set volts not configured for 'vdd-1v8-hs' [0003.605] I> retrieved tmds range from prod_list_hdmi_soc [0003.610] E> invalid display type [0003.611] E> cannot find any other nvdisp nodes [0003.629] I> edid read success [0003.642] I> edid read success [0003.642] I> width = 640, height = 480, frequency = 25174825 [0003.642] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1280, height = 768, frequency = 79500000 [0003.643] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.647] I> width = 720, height = 576, frequency = 26973026 [0003.653] I> width = 1280, height = 720, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1920, height = 1080, frequency = 148351648 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.681] I> width = 720, height = 576, frequency = 26973026 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 4096, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.727] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.741] initializing target [0003.741] calling apps_init() [0003.742] starting app kernel_boot_app [0003.743] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000742] Console: colour dummy device 80x25 [ 0.002282] printk: console [tty0] enabled [ 0.002340] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002376] pid_max: default: 32768 minimum: 301 [ 0.002635] LSM: Security Framework initializing [ 0.002724] Yama: becoming mindful. [ 0.002770] SELinux: Initializing. [ 0.002938] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003007] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006108] rcu: Hierarchical SRCU implementation. [ 0.006347] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007025] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007107] DTB Build time: Aug 10 2022 20:31:49 [ 0.009757] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010025] Remapping and enabling EFI services. [ 0.012225] smp: Bringing up secondary CPUs ... [ 0.042846] Detected PIPT I-cache on CPU1 [ 0.042947] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075157] Detected PIPT I-cache on CPU2 [ 0.075306] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105437] Detected PIPT I-cache on CPU3 [ 0.105528] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135389] Detected PIPT I-cache on CPU4 [ 0.135499] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165375] Detected PIPT I-cache on CPU5 [ 0.165524] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165920] smp: Brought up 1 node, 6 CPUs [ 0.166283] SMP: Total of 6 processors activated. [ 0.166342] CPU features: detected: Privileged Access Never [ 0.166377] CPU features: detected: LSE atomic instructions [ 0.166404] CPU features: detected: User Access Override [ 0.166433] CPU features: detected: 32-bit EL0 Support [ 0.166458] CPU features: detected: RAS Extension Support [ 0.166484] CPU features: detected: CRC32 instructions [ 0.166510] CPU features: detected: 32-bit EL1 Support [ 0.237989] CPU: All CPU(s) started at EL2 [ 0.245175] devtmpfs: initialized [ 0.295552] Registered cp15_barrier emulation handler [ 0.295685] Registered setend emulation handler [ 0.295710] KASLR enabled [ 0.295980] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.296016] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.297339] pinctrl core: initialized pinctrl subsystem [ 0.298355] SMBIOS 3.0.0 present. [ 0.298387] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.298951] NET: Registered protocol family 16 [ 0.300905] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.301448] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.302165] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.302232] audit: initializing netlink subsys (disabled) [ 0.302493] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.303012] thermal_sys: Registered thermal governor 'step_wise' [ 0.303019] thermal_sys: Registered thermal governor 'power_allocator' [ 0.303040] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.305225] cpuidle: using governor menu [ 0.305601] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.306000] ASID allocator initialised with 32768 entries [ 0.306271] Serial: AMBA PL011 UART driver [ 0.309641] Tegra reboot handler registered. [ 0.383541] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.383704] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.383890] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.383964] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.384128] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.384184] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.384312] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.384365] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.384515] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.384574] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.386767] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.386810] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.386844] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.386878] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.386928] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.386968] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.387012] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.387053] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.387084] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.387114] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.387144] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.387173] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.387202] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.387231] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.387260] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.387289] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.387320] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.387438] mc-err: mcerr ops are set to t19x [ 0.399976] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.400003] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.400017] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.400030] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.407306] ACPI: Interpreter disabled. [ 0.408549] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.409972] iommu: Default domain type: Translated [ 0.410043] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.410435] SCSI subsystem initialized [ 0.410595] usbcore: registered new interface driver usbfs [ 0.410638] usbcore: registered new interface driver hub [ 0.410674] usbcore: registered new device driver usb [ 0.411122] mc: Linux media interface: v0.10 [ 0.411156] videodev: Linux video capture interface: v2.00 [ 0.411511] pps_core: LinuxPPS API ver. 1 registered [ 0.411523] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.411546] PTP clock support registered [ 0.411767] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.412160] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.412245] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.412947] Registered efivars operations [ 0.419340] FPGA manager framework [ 0.419451] Advanced Linux Sound Architecture Driver Initialized. [ 0.420033] Bluetooth: Core ver 2.22 [ 0.420071] NET: Registered protocol family 31 [ 0.420083] Bluetooth: HCI device and connection manager initialized [ 0.420099] Bluetooth: HCI socket layer initialized [ 0.420115] Bluetooth: L2CAP socket layer initialized [ 0.420138] Bluetooth: SCO socket layer initialized [ 0.421726] camchar: rtcpu character device driver loaded [ 0.422529] clocksource: Switched to clocksource arch_sys_counter [ 0.769976] VFS: Disk quotas dquot_6.6.0 [ 0.770095] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.770400] pnp: PnP ACPI: disabled [ 0.783303] la/ptsa driver initialized. [ 0.783427] NET: Registered protocol family 2 [ 0.783617] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.788189] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.788263] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.788567] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.788979] TCP: Hash tables configured (established 65536 bind 65536) [ 0.789102] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.789196] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.789388] NET: Registered protocol family 1 [ 0.790116] RPC: Registered named UNIX socket transport module. [ 0.790133] RPC: Registered udp transport module. [ 0.790144] RPC: Registered tcp transport module. [ 0.790154] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.790192] PCI: CLS 0 bytes, default 64 [ 0.790386] Trying to unpack rootfs image as initramfs... [ 0.977096] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.979302] Freeing initrd memory: 8196K [ 0.983517] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.983569] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.983617] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.984104] kvm [1]: IPA Size Limit: 40 bits [ 0.984636] kvm [1]: vgic interrupt IRQ9 [ 0.985090] kvm [1]: VHE mode initialized successfully [ 0.986623] Initialise system trusted keyrings [ 0.986921] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.991711] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.992415] NFS: Registering the id_resolver key type [ 0.992444] Key type id_resolver registered [ 0.992455] Key type id_legacy registered [ 0.992544] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.992563] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.992612] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.001619] NET: Registered protocol family 38 [ 1.001661] Key type asymmetric registered [ 1.001674] Asymmetric key parser 'x509' registered [ 1.001732] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.001951] io scheduler mq-deadline registered [ 1.001966] io scheduler kyber registered [ 1.007167] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.009960] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.010027] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.010104] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.010160] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.010215] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.014956] scrncapt: init (heads:4 wins:6 planes:4) [ 1.015381] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.016091] EINJ: ACPI disabled. [ 1.018605] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.018628] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.018647] tegra-pmc: ### PMC reset level: L1 [ 1.018657] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.018718] tegra-pmc: PMC Prod config success [ 1.024027] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.507520] random: fast init done [ 2.574770] printk: console [ttyTCU0] enabled [ 2.580761] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.585670] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.590203] arm-smmu 10000000.iommu: stage 1 translation [ 2.595452] arm-smmu 10000000.iommu: stage 2 translation [ 2.601218] arm-smmu 10000000.iommu: nested translation [ 2.606563] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.613751] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.623857] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.626608] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.633179] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.641170] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.646221] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.650945] arm-smmu 12000000.iommu: stage 1 translation [ 2.656714] arm-smmu 12000000.iommu: stage 2 translation [ 2.662118] arm-smmu 12000000.iommu: nested translation [ 2.667548] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.674725] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.684777] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.687872] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.694406] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.701849] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.711689] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.714692] tegra_profiler: auth: init [ 2.718795] THERMAL EST: found 3 subdevs [ 2.722484] THERMAL EST num_resources: 0 [ 2.726094] [THERMAL EST subdev 0] [ 2.729428] [THERMAL EST subdev 1] [ 2.732830] [THERMAL EST subdev 2] [ 2.736073] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.742761] THERMAL EST: thz register success. [ 2.746769] THERMAL EST: end of probe, return err: 0 [ 2.752290] nvsciipc: loaded module [ 2.758896] tun: Universal TUN/TAP device driver, 1.6 [ 2.761728] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.768107] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.773424] e1000e: Intel(R) PRO/1000 Network Driver [ 2.778581] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.784408] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.789983] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.796241] PPP generic driver version 2.4.2 [ 2.800404] PPP BSD Compression module registered [ 2.804684] PPP Deflate Compression module registered [ 2.810182] PPP MPPE Compression module registered [ 2.814939] usbcore: registered new interface driver r8152 [ 2.820703] usbcore: registered new interface driver asix [ 2.825772] usbcore: registered new interface driver ax88179_178a [ 2.831895] usbcore: registered new interface driver cdc_ether [ 2.837844] usbcore: registered new interface driver net1080 [ 2.843443] usbcore: registered new interface driver cdc_subset [ 2.849795] usbcore: registered new interface driver zaurus [ 2.855446] usbcore: registered new interface driver cdc_ncm [ 2.861138] usbcore: registered new interface driver aqc111 [ 2.866774] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.872872] ohci-pci: OHCI PCI platform driver [ 2.877171] ohci-platform: OHCI generic platform driver [ 2.882933] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.889084] usbcore: registered new interface driver uas [ 2.893184] usbcore: registered new interface driver usb-storage [ 2.899289] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.905242] mousedev: PS/2 mouse device common for all mice [ 2.910358] usbcore: registered new interface driver xpad [ 2.918256] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.921080] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.929122] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.935563] i2c /dev entries driver [ 2.938947] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.944477] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.949775] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.955443] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.960788] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.966300] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.971707] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.983893] device-mapper: uevent: version 1.0.3 [ 2.984306] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.991890] cpuidle: Initializing cpuidle driver [ 2.996041] sdhci: Secure Digital Host Controller Interface driver [ 3.000933] sdhci: Copyright(c) Pierre Ossman [ 3.004781] Synopsys Designware Multimedia Card Interface Driver [ 3.011195] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.017042] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.017567] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.030307] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.049583] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.058735] vdd-1v0: supplied by regulator-dummy [ 3.064234] vdd-1v8-hs: supplied by regulator-dummy [ 3.069023] vdd-1v8-ls: supplied by regulator-dummy [ 3.073724] vdd-1v8-ao: supplied by regulator-dummy [ 3.077533] vddio-ddr-1v1: supplied by regulator-dummy [ 3.081946] vdd-rtc: supplied by regulator-dummy [ 3.083688] spmic-ldo1: supplied by regulator-dummy [ 3.085045] vdd-ao-3v3: supplied by regulator-dummy [ 3.091137] vddio-emmc-3v3: supplied by regulator-dummy [ 3.097282] spmic-ldo4: supplied by regulator-dummy [ 3.098480] vdd-usb-3v3: supplied by regulator-dummy [ 3.104623] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.110718] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.116181] spmic-ldo8: supplied by vdd-1v8-ls [ 3.117519] gpio-510 (gpio_default): hogged as output/high [ 3.118830] gpio-511 (gpio_default): hogged as output/high [ 3.123986] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.262956] max77686-rtc max77620-rtc: registered as rtc0 [ 3.264153] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.264453] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.977722] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.978745] hid: raw HID events driver (C) Jiri Kosina [ 3.979433] usbcore: registered new interface driver usbhid [ 3.979585] usbhid: USB HID core driver [ 3.981331] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.982477] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.000009] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.075490] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 76.290 ms) ÿá[ 4.067342] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.067950] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.069015] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.069803] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.071717] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.072436] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.072992] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.074257] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.074746] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.076596] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.084050] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.090251] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.094883] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.101926] denver_knobs_init:MTS_VERSION:55637613 [ 4.113973] t19x_cache tegra-cache: probed [ 4.116737] optee: probing for conduit method. [ 4.117539] optee: revision 3.16 (65cc2218) [ 4.118515] optee: dynamic shared memory is enabled [ 4.122439] optee: initialized driver [ 4.129308] nvpmodel: initialized successfully [ 4.130278] tegra_hv: get_hvd: not initialized yet [ 4.134776] user_ivc_mempool: hypervisor not present [ 4.141062] usbcore: registered new interface driver snd-usb-audio [ 4.147351] u32 classifier [ 4.148776] input device check on [ 4.152438] Actions configured [ 4.156173] Initializing XFRM netlink socket [ 4.161136] NET: Registered protocol family 10 [ 4.167505] Segment Routing with IPv6 [ 4.168166] NET: Registered protocol family 17 [ 4.172714] NET: Registered protocol family 15 [ 4.176810] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.190666] Bluetooth: RFCOMM socket layer initialized [ 4.195334] Bluetooth: RFCOMM ver 1.11 [ 4.199309] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.204835] Bluetooth: HIDP socket layer initialized [ 4.210935] 9pnet: Installing 9P2000 support [ 4.214467] Key type dns_resolver registered [ 4.219925] registered taskstats version 1 [ 4.222714] Loading compiled-in X.509 certificates [ 4.234473] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.238662] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.248509] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.250914] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.259216] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.267696] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.382623] tegra194-pcie 14160000.pcie: Link up [ 4.385261] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.385496] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.385618] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.385820] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.385975] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.386299] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.386770] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.399957] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.400413] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.400911] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.402278] pci 0004:01:00.0: supports D1 D2 [ 4.402403] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.410904] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.411254] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.411467] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.411907] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.412119] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.412329] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.417583] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.424963] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.433170] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.443657] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.448036] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.454053] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.461146] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.469763] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.471146] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.479773] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.488124] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.590731] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.591396] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.591620] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.591743] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.591988] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.592156] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.592464] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.592847] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.610891] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.611167] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.612891] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.614212] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.616468] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.618133] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.619287] pci 0005:00:00.0: Removing from iommu group 7 [ 5.619563] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.647980] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.668981] host1x 13e10000.host1x: initialized [ 5.670686] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.671568] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.672625] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.673208] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.674204] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.674945] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.675851] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.676477] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.684505] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.690959] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.700724] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.707829] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.717667] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.724888] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.734782] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.741898] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.751722] falcon 15340000.vic: Adding to iommu group 17 [ 5.766173] falcon 15340000.vic: initialized [ 5.767172] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.772116] falcon 15380000.nvjpg: initialized [ 5.772716] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.785114] falcon 154c0000.nvenc: initialized [ 5.785740] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.794863] falcon 15a80000.nvenc1: initialized [ 5.795457] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.806970] nvdec 15480000.nvdec: initialized [ 5.807548] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.816411] nvdec 15140000.nvdec1: initialized [ 5.816973] tsec 15500000.tsec: Adding to iommu group 18 [ 5.823232] tsec 15500000.tsec: initialized [ 5.823764] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.832148] tsec 15100000.tsecb: initialized [ 5.836685] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.861910] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.873347] gpio-374 (wifi-enable): hogged as output/high [ 5.873718] gpio-431 (camera-control-output-low): hogged as output/low [ 5.874036] gpio-432 (camera-control-output-low): hogged as output/low [ 5.875691] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.877578] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.878151] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.883265] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.888400] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.894283] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.899763] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.908064] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.915405] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.926943] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.931943] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.937757] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.946642] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.956111] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.963199] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.970991] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.977201] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.986627] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.992817] pva 16000000.pva0: Adding to iommu group 22 [ 6.018581] pva 16000000.pva0: initialized [ 6.023321] pva 16800000.pva1: Adding to iommu group 23 [ 6.041619] pva 16800000.pva1: initialized [ 6.045490] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.058656] nvdla 15880000.nvdla0: initialized [ 6.060024] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.068345] nvdla 158c0000.nvdla1: initialized [ 6.074033] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.074368] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.074688] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.075058] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.075429] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.075438] tegradc 15210000.display: Adding to iommu group 26 [ 6.075511] tegradccommon 15200000.display-hub: dma mapping done [ 6.076991] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.082845] tegradc 15210000.display: disp0 connected to head1->sor [ 6.082933] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.083112] tegradc 15200000.display: Adding to iommu group 26 [ 6.088649] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.094104] tegra_cec 3960000.tegra_cec: probed [ 6.100691] tegradc 15210000.display: DT parsed successfully [ 6.108324] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.112365] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.120034] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.124806] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.131788] kfuse 3830000.kfuse: initialized [ 6.138437] generic_infoframe_type: 0x87 [ 6.145602] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.149041] tegradc 15200000.display: DT parsed successfully [ 6.153178] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.159834] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.166088] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.186862] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.193847] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.202615] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.203133] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.219405] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.220627] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.225142] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.237722] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.238228] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.257870] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.263357] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.263520] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.279282] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.290462] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.295535] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.300821] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.308975] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.317822] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.324441] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.331825] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.338986] usb usb1: Product: xHCI Host Controller [ 6.344223] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.350334] usb usb1: SerialNumber: 3610000.xhci [ 6.356014] hub 1-0:1.0: USB hub found [ 6.358882] hub 1-0:1.0: 4 ports detected [ 6.363755] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.368128] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.375688] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.383594] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.391235] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.398464] usb usb2: Product: xHCI Host Controller [ 6.403723] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.409918] usb usb2: SerialNumber: 3610000.xhci [ 6.415391] hub 2-0:1.0: USB hub found [ 6.418222] hub 2-0:1.0: 4 ports detected [ 6.458987] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.464700] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.466128] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.466348] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.479405] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.480444] tegra194-cpufreq ccplex: probed with BWMGR [ 6.481550] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.482281] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.482756] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.484058] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.493240] tegra194-vi5 15c10000.vi: initialized [ 6.494283] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.495657] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.498345] generic_infoframe_type: 0x87 [ 6.504779] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.508801] tegradc 15200000.display: DT parsed successfully [ 6.516833] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.516846] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.522564] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.528680] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.535619] mmc0: CQHCI version 5.10 [ 6.536264] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.536268] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.536271] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.536599] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.536604] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.536760] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.537801] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.537806] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.539825] tegradc 15200000.display: probed [ 6.543453] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.550686] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.583134] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.584295] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.626605] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.627183] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.662701] Console: switching to colour frame buffer device 240x67 [ 6.668147] tegradc 15200000.display: fb registered [ 6.673554] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.680112] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.686749] nvethernet 2490000.ethernet: Macsec not supported [ 6.694244] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.694514] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.707201] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.707768] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.718064] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.725221] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.728379] mmc0: Command Queue Engine enabled [ 6.733102] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.736277] mmc0: periodic cache flush enabled [ 6.736295] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.744275] tegra-se-nvhost 15810000.se: initialized [ 6.747313] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.754847] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.758213] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.763720] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.781168] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.783458] tegra-se-nvhost 15820000.se: initialized [ 6.794249] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.797286] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.805842] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.811393] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.811557] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.811563] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.811569] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.811573] usb 1-2: Manufacturer: Generic [ 6.813561] hub 1-2:1.0: USB hub found [ 6.814925] hub 1-2:1.0: 4 ports detected [ 6.818744] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.825384] tegra-se-nvhost 15830000.se: initialized [ 6.833761] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.841286] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.844956] Extcon AUX1(HDMI) enable [ 6.845110] tegradc 15210000.display: disp1 connected to head1->sor [ 6.849501] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.852898] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.876909] tegra-se-nvhost 15840000.se: initialized [ 6.883230] tegradc 15210000.display: DT parsed successfully [ 6.888426] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.892911] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.900846] tegra_actmon d230000.actmon: in actmon_register()... [ 6.906566] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.916783] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.922955] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.922994] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.937026] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.949913] tegradc 15210000.display: probed [ 6.955430] hvc_sysfs: hypervisor is not present [ 6.970802] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.987905] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.987922] tegradc 15210000.display: fb registered [ 6.995054] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.004299] usb 2-3: Manufacturer: Generic [ 7.014273] ALSA device list: [ 7.014373] No soundcards found. [ 7.018183] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.022469] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.024268] Freeing unused kernel memory: 3968K [ 7.030344] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.030404] hub 2-3:1.0: USB hub found [ 7.035155] hub 2-3:1.0: 4 ports detected [ 7.048381] tegradc 15210000.display: blank - powerdown [ 7.053436] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.054780] Run /init as init process [ 7.061478] Extcon DP: HPD disabled ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.068980] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.068996] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.069001] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.069052] tegradc 15200000.display: blank - powerdown [ 7.086579] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.102583] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.111387] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.111391] Extcon AUX1(HDMI) disable [ 7.135125] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.136034] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.147186] tegradc 15200000.display: unblank [ 7.148263] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.148459] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.154353] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.156253] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.160253] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.160257] Extcon AUX1(HDMI) enable [ 7.167124] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.167129] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.173037] tegradc 15200000.display: sync windows ret = 247 [ 7.208293] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.212905] Extcon HDMI: HPD enabled [ 7.216491] tegradc 15200000.display: hdmi: plugged [ 7.235862] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.237393] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.238875] usb 1-3: Product: Bluetooth Radio [ 7.241843] usb 1-3: Manufacturer: Realtek [ 7.245890] usb 1-3: SerialNumber: 00e04c000001 [ 7.260406] Root device found: mmcblk0p1 [ 7.263812] Found dev node: /dev/mmcblk0p1 [ 7.299358] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.304625] Rootfs mounted over mmcblk0p1 [ 7.342033] Switching from initrd to actual rootfs [ 7.485544] systemd[1]: System time before build time, advancing clock. [ 7.556664] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.561773] systemd[1]: Detected architecture arm64. [ 7.610674] systemd[1]: Set hostname to . [ 7.773312] systemd-sysv-generator[250]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.142613] random: systemd: uninitialized urandom read (16 bytes read) [ 8.144440] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.146151] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.152242] systemd[1]: Created slice system-modprobe.slice. [ 8.155991] random: systemd: uninitialized urandom read (16 bytes read) [ 8.160077] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.166147] random: systemd: uninitialized urandom read (16 bytes read) [ 8.170168] systemd[1]: Created slice User and Session Slice. [ 8.176292] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.182332] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.185899] systemd[1]: Reached target User and Group Name Lookups. [ 8.189384] systemd[1]: Reached target Slices. [ 8.192626] systemd[1]: Reached target Swap. [ 8.196766] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.200567] systemd[1]: Listening on Syslog Socket. [ 8.204286] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.207817] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.212194] systemd[1]: Listening on Journal Audit Socket. [ 8.215914] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.219900] systemd[1]: Listening on Journal Socket. [ 8.224618] systemd[1]: Listening on udev Control Socket. [ 8.229810] systemd[1]: Listening on udev Kernel Socket. [ 8.238469] systemd[1]: Mounting Huge Pages File System... [ 8.246975] systemd[1]: Mounting POSIX Message Queue File System... [ 8.254930] systemd[1]: Mounting RPC Pipe File System... [ 8.263769] systemd[1]: Mounting Kernel Debug File System... [ 8.272377] systemd[1]: Mounting Kernel Trace File System... [ 8.282781] systemd[1]: Starting Journal Service... [ 8.292083] systemd[1]: Starting Set the console keyboard layout... [ 8.300661] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.304373] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.311113] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.319032] systemd[1]: Started Nameserver information manager. [ 8.323214] systemd[1]: Reached target Network (Pre). [ 8.330051] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.330247] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.337753] systemd[1]: Starting Load Kernel Modules... [ 8.346399] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.354556] systemd[1]: Starting udev Coldplug all Devices... [ 8.366120] systemd[1]: Mounted Huge Pages File System. [ 8.370107] systemd[1]: Mounted POSIX Message Queue File System. [ 8.373861] systemd[1]: Mounted RPC Pipe File System. [ 8.377705] systemd[1]: Mounted Kernel Debug File System. [ 8.377841] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.379578] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.382668] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.382675] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.382684] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.382688] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.386840] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.387043] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.387239] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.387246] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.402788] systemd[1]: Mounted Kernel Trace File System. [ 8.409540] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.416651] systemd[1]: nvfb-udev.service: Succeeded. [ 8.421067] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.433560] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.446619] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.448453] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.454375] systemd[1]: Starting Load/Save Random Seed... [ 8.463296] systemd[1]: Starting Create System Users... [ 8.487360] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.487360] [ 8.517162] systemd[1]: Finished Load Kernel Modules. [ 8.522208] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.528699] systemd[1]: Mounting Kernel Configuration File System... [ 8.537435] systemd[1]: Started OP-TEE Client Supplicant. [ 8.545814] systemd[1]: Starting Apply Kernel Variables... [ 8.553416] systemd[1]: Mounted Kernel Configuration File System. [ 8.564501] systemd[1]: Finished Create System Users. [ 8.571825] systemd[1]: Finished Set the console keyboard layout. [ 9.820642] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.827283] imx219 9-0010: board setup failed [ 9.828781] imx219: probe of 9-0010 failed with error -121 [ 9.841165] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.847791] imx219 10-0010: board setup failed [ 9.849250] imx219: probe of 10-0010 failed with error -121 [ 9.930279] hot-surface-alert cooling state: 0 -> 1 [ 9.946579] random: crng init done [ 9.947967] random: 7 urandom warning(s) missed due to ratelimiting [ 11.202049] using random self ethernet address [ 11.203757] using random host ethernet address [ 11.380675] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.382429] Creating 1 MTD partitions on "spi6.0": [ 11.382439] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.381424] using random self ethernet address [ 12.383087] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.820656] nvidia: loading out-of-tree module taints kernel. [ 59.172542] watchdog: watchdog0: watchdog did not stop! [ 59.646601] Trying to unregister non-registered hwtime source [ 62.710416] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.712420] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, grÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration miÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäght be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.629] I> edid read success [0003.642] I> edid read success [0003.642] I> width = 640, height = 480, frequency = 25174825 [0003.642] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1280, height = 768, frequency = 79500000 [0003.643] I> width = 1360, height = 768, frequency = 85500000 [0003.643] I> width = 720, height = 480, frequency = 26973026 [0003.647] I> width = 720, height = 576, frequency = 26973026 [0003.653] I> width = 1280, height = 720, frequency = 74175824 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1920, height = 1080, frequency = 148351648 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.681] I> width = 720, height = 576, frequency = 26973026 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 4096, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.727] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.741] initializing target [0003.741] calling apps_init() [0003.742] starting app kernel_boot_app [0003.743] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000725] Console: colour dummy device 80x25 [ 0.002370] printk: console [tty0] enabled [ 0.002433] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002476] pid_max: default: 32768 minimum: 301 [ 0.002703] LSM: Security Framework initializing [ 0.002764] Yama: becoming mindful. [ 0.002811] SELinux: Initializing. [ 0.002974] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003026] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006006] rcu: Hierarchical SRCU implementation. [ 0.006342] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007219] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007280] DTB Build time: Aug 10 2022 20:31:49 [ 0.010232] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010500] Remapping and enabling EFI services. [ 0.012506] smp: Bringing up secondary CPUs ... [ 0.041510] Detected PIPT I-cache on CPU1 [ 0.041568] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071420] Detected PIPT I-cache on CPU2 [ 0.071521] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101116] Detected PIPT I-cache on CPU3 [ 0.101186] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130822] Detected PIPT I-cache on CPU4 [ 0.130922] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160555] Detected PIPT I-cache on CPU5 [ 0.160651] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161020] smp: Brought up 1 node, 6 CPUs [ 0.161299] SMP: Total of 6 processors activated. [ 0.161370] CPU features: detected: Privileged Access Never [ 0.161400] CPU features: detected: LSE atomic instructions [ 0.161420] CPU features: detected: User Access Override [ 0.161440] CPU features: detected: 32-bit EL0 Support [ 0.161461] CPU features: detected: RAS Extension Support [ 0.161492] CPU features: detected: CRC32 instructions [ 0.161511] CPU features: detected: 32-bit EL1 Support [ 0.233111] CPU: All CPU(s) started at EL2 [ 0.238169] devtmpfs: initialized [ 0.287770] Registered cp15_barrier emulation handler [ 0.287904] Registered setend emulation handler [ 0.287930] KASLR enabled [ 0.288156] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288187] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289299] pinctrl core: initialized pinctrl subsystem [ 0.290260] SMBIOS 3.0.0 present. [ 0.290304] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.290978] NET: Registered protocol family 16 [ 0.292937] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293441] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294169] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294243] audit: initializing netlink subsys (disabled) [ 0.294578] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.294975] thermal_sys: Registered thermal governor 'step_wise' [ 0.294982] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295018] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.297045] cpuidle: using governor menu [ 0.297356] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297771] ASID allocator initialised with 32768 entries [ 0.297978] Serial: AMBA PL011 UART driver [ 0.301294] Tegra reboot handler registered. [ 0.368053] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.368222] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.368447] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.368525] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.368697] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.368755] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.368889] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.368942] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.369071] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.369123] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.372232] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.372279] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.372316] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.372351] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.372388] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.372423] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.372456] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.372490] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.372525] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.372558] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.372597] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.372631] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.372665] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.372699] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.372755] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.372794] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.372842] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.372975] mc-err: mcerr ops are set to t19x [ 0.384322] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.384351] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.384369] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.384386] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.391136] ACPI: Interpreter disabled. [ 0.392371] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.393816] iommu: Default domain type: Translated [ 0.393908] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.394339] SCSI subsystem initialized [ 0.394482] usbcore: registered new interface driver usbfs [ 0.394538] usbcore: registered new interface driver hub [ 0.394575] usbcore: registered new device driver usb [ 0.394941] mc: Linux media interface: v0.10 [ 0.394972] videodev: Linux video capture interface: v2.00 [ 0.395327] pps_core: LinuxPPS API ver. 1 registered [ 0.395345] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.395376] PTP clock support registered [ 0.395622] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.395927] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.396014] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.396755] Registered efivars operations [ 0.402336] FPGA manager framework [ 0.402464] Advanced Linux Sound Architecture Driver Initialized. [ 0.403023] Bluetooth: Core ver 2.22 [ 0.403065] NET: Registered protocol family 31 [ 0.403080] Bluetooth: HCI device and connection manager initialized [ 0.403101] Bluetooth: HCI socket layer initialized [ 0.403120] Bluetooth: L2CAP socket layer initialized [ 0.403152] Bluetooth: SCO socket layer initialized [ 0.404768] camchar: rtcpu character device driver loaded [ 0.405520] clocksource: Switched to clocksource arch_sys_counter [ 0.823097] VFS: Disk quotas dquot_6.6.0 [ 0.823200] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.823750] pnp: PnP ACPI: disabled [ 0.837033] la/ptsa driver initialized. [ 0.837270] NET: Registered protocol family 2 [ 0.837550] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.845182] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.845368] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.845805] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.846447] TCP: Hash tables configured (established 65536 bind 65536) [ 0.846626] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.846783] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.847077] NET: Registered protocol family 1 [ 0.847970] RPC: Registered named UNIX socket transport module. [ 0.848000] RPC: Registered udp transport module. [ 0.848015] RPC: Registered tcp transport module. [ 0.848059] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.848089] PCI: CLS 0 bytes, default 64 [ 0.848346] Trying to unpack rootfs image as initramfs... [ 1.038219] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.040337] Freeing initrd memory: 8196K [ 1.043868] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.043920] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.043953] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.044249] kvm [1]: IPA Size Limit: 40 bits [ 1.044659] kvm [1]: vgic interrupt IRQ9 [ 1.045071] kvm [1]: VHE mode initialized successfully [ 1.046203] Initialise system trusted keyrings [ 1.046493] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.051005] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.051686] NFS: Registering the id_resolver key type [ 1.051749] Key type id_resolver registered [ 1.051764] Key type id_legacy registered [ 1.051856] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.051881] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.051934] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.060034] NET: Registered protocol family 38 [ 1.060061] Key type asymmetric registered [ 1.060076] Asymmetric key parser 'x509' registered [ 1.060130] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.060314] io scheduler mq-deadline registered [ 1.060331] io scheduler kyber registered [ 1.064794] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.067066] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.067129] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.067192] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.067248] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.067304] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.071356] scrncapt: init (heads:4 wins:6 planes:4) [ 1.071371] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.072263] EINJ: ACPI disabled. [ 1.074762] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.074788] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.074804] tegra-pmc: ### PMC reset level: L1 [ 1.074819] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.074866] tegra-pmc: PMC Prod config success [ 1.078909] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.083405] random: fast init done [ 1.084256] printk: console [ttyTCU0] enabled [ 2.635431] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.640502] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.644818] arm-smmu 10000000.iommu: stage 1 translation [ 2.650253] arm-smmu 10000000.iommu: stage 2 translation [ 2.656015] arm-smmu 10000000.iommu: nested translation [ 2.661111] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.668270] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.677697] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.681650] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.687957] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.695792] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.700999] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.705975] arm-smmu 12000000.iommu: stage 1 translation [ 2.711485] arm-smmu 12000000.iommu: stage 2 translation [ 2.716908] arm-smmu 12000000.iommu: nested translation [ 2.722084] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.729263] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.738346] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.742392] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.748941] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.756561] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.766204] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.769659] tegra_profiler: auth: init [ 2.773889] THERMAL EST: found 3 subdevs [ 2.777014] THERMAL EST num_resources: 0 [ 2.781141] [THERMAL EST subdev 0] [ 2.784229] [THERMAL EST subdev 1] [ 2.787616] [THERMAL EST subdev 2] [ 2.791136] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.797594] THERMAL EST: thz register success. [ 2.801815] THERMAL EST: end of probe, return err: 0 [ 2.807096] nvsciipc: loaded module [ 2.813412] tun: Universal TUN/TAP device driver, 1.6 [ 2.816468] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.822951] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.828437] e1000e: Intel(R) PRO/1000 Network Driver [ 2.833372] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.839222] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.844491] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.850602] PPP generic driver version 2.4.2 [ 2.854879] PPP BSD Compression module registered [ 2.859722] PPP Deflate Compression module registered [ 2.864712] PPP MPPE Compression module registered [ 2.869730] usbcore: registered new interface driver r8152 [ 2.875507] usbcore: registered new interface driver asix [ 2.880582] usbcore: registered new interface driver ax88179_178a [ 2.886704] usbcore: registered new interface driver cdc_ether [ 2.892895] usbcore: registered new interface driver net1080 [ 2.898236] usbcore: registered new interface driver cdc_subset [ 2.904309] usbcore: registered new interface driver zaurus [ 2.909979] usbcore: registered new interface driver cdc_ncm [ 2.915657] usbcore: registered new interface driver aqc111 [ 2.921277] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.927370] ohci-pci: OHCI PCI platform driver [ 2.931947] ohci-platform: OHCI generic platform driver [ 2.937348] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.943664] usbcore: registered new interface driver uas [ 2.947972] usbcore: registered new interface driver usb-storage [ 2.954284] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.960200] mousedev: PS/2 mouse device common for all mice [ 2.965142] usbcore: registered new interface driver xpad [ 2.973140] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.975881] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.983904] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.990347] i2c /dev entries driver [ 2.993764] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.999470] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.004573] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.009981] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.015319] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.020838] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.026488] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.038138] device-mapper: uevent: version 1.0.3 [ 3.038501] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.046468] cpuidle: Initializing cpuidle driver [ 3.050699] sdhci: Secure Digital Host Controller Interface driver [ 3.055485] sdhci: Copyright(c) Pierre Ossman [ 3.059567] Synopsys Designware Multimedia Card Interface Driver [ 3.066020] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.072024] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.072629] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.085115] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.103600] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.112822] vdd-1v0: supplied by regulator-dummy [ 3.118232] vdd-1v8-hs: supplied by regulator-dummy [ 3.122938] vdd-1v8-ls: supplied by regulator-dummy [ 3.127611] vdd-1v8-ao: supplied by regulator-dummy [ 3.131493] vddio-ddr-1v1: supplied by regulator-dummy [ 3.135831] vdd-rtc: supplied by regulator-dummy [ 3.137494] spmic-ldo1: supplied by regulator-dummy [ 3.138646] vdd-ao-3v3: supplied by regulator-dummy [ 3.144673] vddio-emmc-3v3: supplied by regulator-dummy [ 3.150827] spmic-ldo4: supplied by regulator-dummy [ 3.151997] vdd-usb-3v3: supplied by regulator-dummy [ 3.157979] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.164130] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.169576] spmic-ldo8: supplied by vdd-1v8-ls [ 3.170925] gpio-510 (gpio_default): hogged as output/high [ 3.172415] gpio-511 (gpio_default): hogged as output/high [ 3.178997] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.317625] max77686-rtc max77620-rtc: registered as rtc0 [ 3.318616] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.318925] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.050584] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.051779] hid: raw HID events driver (C) Jiri Kosina [ 4.052451] usbcore: registered new interface driver usbhid [ 4.052592] usbhid: USB HID core driver [ 4.054701] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.055910] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.033582] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.108503] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.777 ms, total boot 75.727 ms) ÿá[ 4.140588] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.141189] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.142227] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.142990] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.144648] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.145393] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.146038] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.147215] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.147450] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.149335] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.150418] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.150573] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.157220] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.157228] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.157236] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.192632] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.198551] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.202625] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.208816] denver_knobs_init:MTS_VERSION:55637613 [ 4.222453] t19x_cache tegra-cache: probed [ 4.226640] optee: probing for conduit method. [ 4.227428] optee: revision 3.16 (65cc2218) [ 4.228417] optee: dynamic shared memory is enabled [ 4.229645] optee: initialized driver [ 4.236934] nvpmodel: initialized successfully [ 4.238055] tegra_hv: get_hvd: not initialized yet [ 4.241410] user_ivc_mempool: hypervisor not present [ 4.249140] usbcore: registered new interface driver snd-usb-audio [ 4.254692] u32 classifier [ 4.255823] input device check on [ 4.259562] Actions configured [ 4.262872] Initializing XFRM netlink socket [ 4.268341] NET: Registered protocol family 10 [ 4.274342] Segment Routing with IPv6 [ 4.275464] NET: Registered protocol family 17 [ 4.279470] NET: Registered protocol family 15 [ 4.284142] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.297884] Bluetooth: RFCOMM socket layer initialized [ 4.302560] Bluetooth: RFCOMM ver 1.11 [ 4.306300] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.311953] Bluetooth: HIDP socket layer initialized [ 4.318290] 9pnet: Installing 9P2000 support [ 4.321265] Key type dns_resolver registered [ 4.327221] registered taskstats version 1 [ 4.330030] Loading compiled-in X.509 certificates [ 4.342843] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.345751] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.355548] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.358001] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.366371] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.374895] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.489524] tegra194-pcie 14160000.pcie: Link up [ 4.492584] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.492942] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.493195] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.493644] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.494074] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.494755] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.495406] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.510226] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.510787] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.511314] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.512933] pci 0004:01:00.0: supports D1 D2 [ 4.513100] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.525806] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.526166] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.526524] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.526894] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.527232] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.527472] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.527770] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.531528] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.540279] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.550341] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.555203] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.560403] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.567502] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.577781] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.578142] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.586483] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.595170] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.710798] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.711497] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.711738] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.711893] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.712270] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.712499] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.712903] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.713366] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.737829] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.738225] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.740132] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.741731] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.743235] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.744931] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.746162] pci 0005:00:00.0: Removing from iommu group 7 [ 5.746611] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.791843] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.817746] host1x 13e10000.host1x: initialized [ 5.819512] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.820340] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.821752] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.822405] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.823570] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.824174] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.825181] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.825943] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.826852] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.827481] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.828430] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.829134] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.838482] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.844921] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.854780] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.861915] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.871703] falcon 15340000.vic: Adding to iommu group 17 [ 5.887826] falcon 15340000.vic: initialized [ 5.888981] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.895159] falcon 15380000.nvjpg: initialized [ 5.895955] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.904884] falcon 154c0000.nvenc: initialized [ 5.905609] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.914645] falcon 15a80000.nvenc1: initialized [ 5.915214] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.927869] nvdec 15480000.nvdec: initialized [ 5.928723] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.940681] nvdec 15140000.nvdec1: initialized [ 5.941436] tsec 15500000.tsec: Adding to iommu group 18 [ 5.947429] tsec 15500000.tsec: initialized [ 5.947952] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.953249] tsec 15100000.tsecb: initialized [ 5.957363] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.986656] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.001237] gpio-374 (wifi-enable): hogged as output/high [ 6.001678] gpio-431 (camera-control-output-low): hogged as output/low [ 6.002020] gpio-432 (camera-control-output-low): hogged as output/low [ 6.003972] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.005940] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.006611] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.008071] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.009438] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.014357] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.020030] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.028718] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.035499] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.048132] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.052533] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.057911] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.066758] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.076288] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.083455] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.091243] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.097320] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.106986] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.113185] pva 16000000.pva0: Adding to iommu group 22 [ 6.142182] pva 16000000.pva0: initialized [ 6.147239] pva 16800000.pva1: Adding to iommu group 23 [ 6.165851] pva 16800000.pva1: initialized [ 6.169996] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.183942] nvdla 15880000.nvdla0: initialized [ 6.185379] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.194809] nvdla 158c0000.nvdla1: initialized [ 6.199354] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.199690] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.199860] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.200061] tegradccommon 15200000.display-hub: dma mapping done [ 6.200518] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.201169] tegradc 15200000.display: Adding to iommu group 26 [ 6.202698] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.203741] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.206085] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.208256] tegra_cec 3960000.tegra_cec: probed [ 6.209413] tegradc 15210000.display: Adding to iommu group 26 [ 6.210192] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.210345] generic_infoframe_type: 0x87 [ 6.210439] tegradc 15200000.display: DT parsed successfully [ 6.210527] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.214040] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.214429] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.214439] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.214443] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.215348] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.215358] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.216442] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.219592] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.232193] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.235882] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.243730] kfuse 3830000.kfuse: initialized [ 6.251213] tegradc 15210000.display: disp0 connected to head1->sor [ 6.258039] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.265829] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.273522] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.279294] tegradc 15210000.display: DT parsed successfully [ 6.286200] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.295973] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.368409] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.378291] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.382820] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.392432] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.397512] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.419803] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.420274] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.420599] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.425045] random: crng init done [ 6.429354] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.441007] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.447532] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.455447] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.462567] usb usb1: Product: xHCI Host Controller [ 6.467335] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.473400] usb usb1: SerialNumber: 3610000.xhci [ 6.479437] hub 1-0:1.0: USB hub found [ 6.482018] hub 1-0:1.0: 4 ports detected [ 6.487097] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.491800] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.499162] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.506904] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.515013] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.522257] usb usb2: Product: xHCI Host Controller [ 6.527269] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.533166] usb usb2: SerialNumber: 3610000.xhci [ 6.539128] hub 2-0:1.0: USB hub found [ 6.541719] hub 2-0:1.0: 4 ports detected [ 6.590409] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.597388] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.599323] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.599541] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.612852] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.613981] tegra194-cpufreq ccplex: probed with BWMGR [ 6.615386] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.615906] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.616469] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.617657] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.625069] tegra194-vi5 15c10000.vi: initialized [ 6.626539] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.626715] generic_infoframe_type: 0x87 [ 6.626808] mmc0: CQHCI version 5.10 [ 6.626861] tegradc 15200000.display: DT parsed successfully [ 6.627861] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.628071] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.628077] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.628084] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.628089] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.628093] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.633564] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.635426] tegradc 15200000.display: Display dc.000000004f1e8f28 registered with id=0 [ 6.641664] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.649959] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.656170] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.658280] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.662481] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.670373] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.675485] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.690744] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.705030] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.712204] nvethernet 2490000.ethernet: Macsec not supported [ 6.719871] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.729517] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.736991] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.743905] mmc0: Command Queue Engine enabled [ 6.744966] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.745088] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.745205] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.749661] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.750277] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.755857] mmc0: periodic cache flush enabled [ 6.756256] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.781959] tegradc 15200000.display: probed [ 6.787911] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.841604] tegra-se-nvhost 15810000.se: initialized [ 6.848879] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.857709] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.869537] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.871853] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.878089] tegra-se-nvhost 15820000.se: initialized [ 6.879554] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.884323] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.896893] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.896912] Console: switching to colour frame buffer device 240x67 [ 6.897540] tegra-se-nvhost 15830000.se: initialized [ 6.903053] tegradc 15200000.display: fb registered [ 6.910032] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.914021] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.919037] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.925770] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.931372] tegra-se-nvhost 15840000.se: initialized [ 6.937198] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.944627] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.961415] tegra_actmon d230000.actmon: in actmon_register()... [ 6.966133] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.971603] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.980128] hvc_sysfs: hypervisor is not present [ 6.983906] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.991957] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.999269] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.000640] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.004083] usb 1-2: Manufacturer: Generic [ 7.006118] hub 1-2:1.0: USB hub found [ 7.008987] ALSA device list: [ 7.008995] No soundcards found. [ 7.014108] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.018408] hub 1-2:1.0: 4 ports detected [ 7.020889] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.047958] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.054651] Extcon AUX1(HDMI) enable [ 7.058195] tegradc 15210000.display: disp1 connected to head1->sor [ 7.064385] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.071374] tegradc 15210000.display: DT parsed successfully [ 7.077091] tegradc 15210000.display: Display dc.00000000ff20606e registered with id=1 [ 7.085426] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.086424] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.091222] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.097952] tegradc 15210000.display: probed [ 7.109568] tegradc 15210000.display: fb registered [ 7.117647] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.120858] Freeing unused kernel memory: 3968K [ 7.121495] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.121505] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.134763] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.147588] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.147593] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.147598] usb 2-3: Manufacturer: Generic [ 7.147612] tegradc 15210000.display: blank - powerdown [ 7.157592] Run /init as init process [ 7.158184] hub 2-3:1.0: USB hub found [ 7.159560] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.159969] hub 2-3:1.0: 4 ports detected [ 7.169005] Extcon DP: HPD disabled [ 7.169010] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.169038] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.176099] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.233521] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.233699] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.243158] tegradc 15200000.display: blank - powerdown [ 7.257556] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.268904] Root device found: mmcblk0p1 [ 7.271011] Found dev node: /dev/mmcblk0p1 [ 7.284420] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.284426] Extcon AUX1(HDMI) disable [ 7.306449] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.308048] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.308948] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.311342] Rootfs mounted over mmcblk0p1 [ 7.321684] tegradc 15200000.display: unblank [ 7.322768] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.322974] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.329838] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.331794] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.335929] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.335933] Extcon AUX1(HDMI) enable [ 7.348555] tegradc 15200000.display: sync windows ret = 247 [ 7.350951] Switching from initrd to actual rootfs [ 7.382113] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.383671] Extcon HDMI: HPD enabled [ 7.385046] tegradc 15200000.display: hdmi: plugged [ 7.410798] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.412327] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.413849] usb 1-3: Product: Bluetooth Radio [ 7.415214] usb 1-3: Manufacturer: Realtek [ 7.416561] usb 1-3: SerialNumber: 00e04c000001 [ 7.531181] systemd[1]: System time before build time, advancing clock. [ 7.601689] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.606826] systemd[1]: Detected architecture arm64. [ 7.652415] systemd[1]: Set hostname to . [ 7.818666] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.160318] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.162208] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.168002] systemd[1]: Created slice system-modprobe.slice. [ 8.172882] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.177192] systemd[1]: Created slice User and Session Slice. [ 8.180893] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.185639] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.189171] systemd[1]: Reached target User and Group Name Lookups. [ 8.192676] systemd[1]: Reached target Slices. [ 8.195887] systemd[1]: Reached target Swap. [ 8.200043] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.203775] systemd[1]: Listening on Syslog Socket. [ 8.207448] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.210951] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.215351] systemd[1]: Listening on Journal Audit Socket. [ 8.220199] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.224409] systemd[1]: Listening on Journal Socket. [ 8.228470] systemd[1]: Listening on udev Control Socket. [ 8.231865] systemd[1]: Listening on udev Kernel Socket. [ 8.239989] systemd[1]: Mounting Huge Pages File System... [ 8.248020] systemd[1]: Mounting POSIX Message Queue File System... [ 8.255636] systemd[1]: Mounting RPC Pipe File System... [ 8.264393] systemd[1]: Mounting Kernel Debug File System... [ 8.272923] systemd[1]: Mounting Kernel Trace File System... [ 8.283153] systemd[1]: Starting Journal Service... [ 8.292099] systemd[1]: Starting Set the console keyboard layout... [ 8.300382] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.303964] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.310509] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.318585] systemd[1]: Started Nameserver information manager. [ 8.323540] systemd[1]: Reached target Network (Pre). [ 8.330565] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.332779] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.339622] systemd[1]: Starting Load Kernel Modules... [ 8.347490] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.355583] systemd[1]: Starting udev Coldplug all Devices... [ 8.366953] systemd[1]: Mounted Huge Pages File System. [ 8.370833] systemd[1]: Mounted POSIX Message Queue File System. [ 8.374434] systemd[1]: Mounted RPC Pipe File System. [ 8.378066] systemd[1]: Mounted Kernel Debug File System. [ 8.378524] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.380310] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.383012] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.383018] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.383028] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.383032] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.383283] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.383733] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.383879] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.383886] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.400733] systemd[1]: Mounted Kernel Trace File System. [ 8.407890] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.414293] systemd[1]: nvfb-udev.service: Succeeded. [ 8.419259] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.431833] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.444676] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.447251] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.454680] systemd[1]: Starting Load/Save Random Seed... [ 8.462664] systemd[1]: Starting Create System Users... [ 8.476897] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.476897] [ 8.516242] systemd[1]: Finished Load Kernel Modules. [ 8.527169] systemd[1]: Finished Load/Save Random Seed. [ 8.532079] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.539209] systemd[1]: Mounting Kernel Configuration File System... [ 8.547539] systemd[1]: Started OP-TEE Client Supplicant. [ 8.556084] systemd[1]: Starting Apply Kernel Variables... [ 8.565781] systemd[1]: Finished Set the console keyboard layout. [ 8.570016] systemd[1]: Mounted Kernel Configuration File System. [ 8.580853] systemd[1]: Finished Create System Users. [ 9.899650] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.914739] imx219 9-0010: board setup failed [ 9.917115] imx219: probe of 9-0010 failed with error -121 [ 9.929372] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.940354] imx219 10-0010: board setup failed [ 9.941819] imx219: probe of 10-0010 failed with error -121 [ 10.024892] hot-surface-alert cooling state: 0 -> 1 [ 10.636646] using random self ethernet address [ 10.673845] using random host ethernet address [ 11.596771] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.598795] Creating 1 MTD partitions on "spi6.0": [ 11.600501] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.015908] using random self ethernet address [ 12.018329] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.836624] nvidia: loading out-of-tree module taints kernel. [ 59.179059] watchdog: watchdog0: watchdog did not stop! [ 59.686476] Trying to unregister non-registered hwtime source [ 62.748168] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.750160] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busùÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.905] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.915] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.922] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.323] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä ÿâfuse initialized hwwdt initialized ÿäNon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exteÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿärnalÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä DT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized ÿä:ÿâpm_post initialized dbells initialized ÿä23:ÿâdmce initialized cvc initialized ÿä20 UTC 2022 aÿâavfs_clk_mach_post initialized ÿäarchÿâavfs_clk_platform_post initialized ÿä64 ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.647] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.649] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 4096, height = 2160, frequency = 296703296 [0003.721] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.747] calling apps_init() [0003.748] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000020] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000699] Console: colour dummy device 80x25 [ 0.002169] printk: console [tty0] enabled [ 0.002253] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002288] pid_max: default: 32768 minimum: 301 [ 0.002530] LSM: Security Framework initializing [ 0.002589] Yama: becoming mindful. [ 0.002631] SELinux: Initializing. [ 0.002797] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002834] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005853] rcu: Hierarchical SRCU implementation. [ 0.006129] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006836] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006883] DTB Build time: Aug 10 2022 20:31:49 [ 0.009576] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009814] Remapping and enabling EFI services. [ 0.011965] smp: Bringing up secondary CPUs ... [ 0.043725] Detected PIPT I-cache on CPU1 [ 0.043836] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075998] Detected PIPT I-cache on CPU2 [ 0.076149] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105825] Detected PIPT I-cache on CPU3 [ 0.105975] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135671] Detected PIPT I-cache on CPU4 [ 0.135770] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165401] Detected PIPT I-cache on CPU5 [ 0.165553] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165904] smp: Brought up 1 node, 6 CPUs [ 0.166155] SMP: Total of 6 processors activated. [ 0.166220] CPU features: detected: Privileged Access Never [ 0.166242] CPU features: detected: LSE atomic instructions [ 0.166256] CPU features: detected: User Access Override [ 0.166269] CPU features: detected: 32-bit EL0 Support [ 0.166281] CPU features: detected: RAS Extension Support [ 0.166293] CPU features: detected: CRC32 instructions [ 0.166306] CPU features: detected: 32-bit EL1 Support [ 0.244150] CPU: All CPU(s) started at EL2 [ 0.250758] devtmpfs: initialized [ 0.304230] Registered cp15_barrier emulation handler [ 0.304363] Registered setend emulation handler [ 0.304386] KASLR enabled [ 0.304656] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.304682] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.305964] pinctrl core: initialized pinctrl subsystem [ 0.307011] SMBIOS 3.0.0 present. [ 0.307045] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.307725] NET: Registered protocol family 16 [ 0.309781] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.310298] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.311033] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.311092] audit: initializing netlink subsys (disabled) [ 0.311433] audit: type=2000 audit(0.304:1): state=initialized audit_enabled=0 res=1 [ 0.311865] thermal_sys: Registered thermal governor 'step_wise' [ 0.311871] thermal_sys: Registered thermal governor 'power_allocator' [ 0.311888] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.314093] cpuidle: using governor menu [ 0.314385] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.314808] ASID allocator initialised with 32768 entries [ 0.315057] Serial: AMBA PL011 UART driver [ 0.318306] Tegra reboot handler registered. [ 0.391396] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.391502] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.391712] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.391769] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.391889] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.391928] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.392077] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.392117] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.392279] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.392319] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.394438] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.394471] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.394496] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.394521] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.394548] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.394572] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.394596] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.394620] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.394643] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.394666] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.394687] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.394708] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.394729] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.394750] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.394786] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.394808] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.394829] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.394911] mc-err: mcerr ops are set to t19x [ 0.406879] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.406904] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.406917] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.406930] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.413818] ACPI: Interpreter disabled. [ 0.414884] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.416084] iommu: Default domain type: Translated [ 0.416204] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.416562] SCSI subsystem initialized [ 0.416759] usbcore: registered new interface driver usbfs [ 0.416804] usbcore: registered new interface driver hub [ 0.416839] usbcore: registered new device driver usb [ 0.417224] mc: Linux media interface: v0.10 [ 0.417261] videodev: Linux video capture interface: v2.00 [ 0.417570] pps_core: LinuxPPS API ver. 1 registered [ 0.417586] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.417616] PTP clock support registered [ 0.417833] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.418156] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.418243] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.418898] Registered efivars operations [ 0.424881] FPGA manager framework [ 0.424994] Advanced Linux Sound Architecture Driver Initialized. [ 0.425532] Bluetooth: Core ver 2.22 [ 0.425569] NET: Registered protocol family 31 [ 0.425579] Bluetooth: HCI device and connection manager initialized [ 0.425594] Bluetooth: HCI socket layer initialized [ 0.425609] Bluetooth: L2CAP socket layer initialized [ 0.425630] Bluetooth: SCO socket layer initialized [ 0.427418] camchar: rtcpu character device driver loaded [ 0.428152] clocksource: Switched to clocksource arch_sys_counter [ 0.720833] VFS: Disk quotas dquot_6.6.0 [ 0.720909] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.721235] pnp: PnP ACPI: disabled [ 0.733463] la/ptsa driver initialized. [ 0.733630] NET: Registered protocol family 2 [ 0.733788] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.738378] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.738505] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.738774] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.739208] TCP: Hash tables configured (established 65536 bind 65536) [ 0.739326] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.739415] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.739635] NET: Registered protocol family 1 [ 0.740292] RPC: Registered named UNIX socket transport module. [ 0.740309] RPC: Registered udp transport module. [ 0.740318] RPC: Registered tcp transport module. [ 0.740349] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.740368] PCI: CLS 0 bytes, default 64 [ 0.740593] Trying to unpack rootfs image as initramfs... [ 0.927572] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.929672] Freeing initrd memory: 8196K [ 0.933814] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.933851] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.933879] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.934191] kvm [1]: IPA Size Limit: 40 bits [ 0.934732] kvm [1]: vgic interrupt IRQ9 [ 0.935255] kvm [1]: VHE mode initialized successfully [ 0.936712] Initialise system trusted keyrings [ 0.936958] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.941988] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.942717] NFS: Registering the id_resolver key type [ 0.942746] Key type id_resolver registered [ 0.942756] Key type id_legacy registered [ 0.942834] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.942854] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.942880] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.950307] NET: Registered protocol family 38 [ 0.950325] Key type asymmetric registered [ 0.950335] Asymmetric key parser 'x509' registered [ 0.950380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.950547] io scheduler mq-deadline registered [ 0.950559] io scheduler kyber registered [ 0.954965] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.957117] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.957173] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.957222] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.957268] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.957318] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.962041] scrncapt: init (heads:4 wins:6 planes:4) [ 0.962488] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.963209] EINJ: ACPI disabled. [ 0.965591] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.965612] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.965622] tegra-pmc: ### PMC reset level: L1 [ 0.965631] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.965668] tegra-pmc: PMC Prod config success [ 0.970100] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.453909] random: fast init done [ 2.520906] printk: console [ttyTCU0] enabled [ 2.526595] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.531813] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.536088] arm-smmu 10000000.iommu: stage 1 translation [ 2.541856] arm-smmu 10000000.iommu: stage 2 translation [ 2.547361] arm-smmu 10000000.iommu: nested translation [ 2.552715] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.559620] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.569516] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.573002] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.579559] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.586747] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.592364] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.597325] arm-smmu 12000000.iommu: stage 1 translation [ 2.602576] arm-smmu 12000000.iommu: stage 2 translation [ 2.608259] arm-smmu 12000000.iommu: nested translation [ 2.613699] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.620611] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.630449] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.634012] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.640293] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.647570] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.657538] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.660973] tegra_profiler: auth: init [ 2.665133] THERMAL EST: found 3 subdevs [ 2.668393] THERMAL EST num_resources: 0 [ 2.672238] [THERMAL EST subdev 0] [ 2.675540] [THERMAL EST subdev 1] [ 2.679222] [THERMAL EST subdev 2] [ 2.682467] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.688607] THERMAL EST: thz register success. [ 2.693161] THERMAL EST: end of probe, return err: 0 [ 2.698057] nvsciipc: loaded module [ 2.704773] tun: Universal TUN/TAP device driver, 1.6 [ 2.707845] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.713987] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.719791] e1000e: Intel(R) PRO/1000 Network Driver [ 2.724464] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.730540] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.735850] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.742184] PPP generic driver version 2.4.2 [ 2.746282] PPP BSD Compression module registered [ 2.750818] PPP Deflate Compression module registered [ 2.756063] PPP MPPE Compression module registered [ 2.761332] usbcore: registered new interface driver r8152 [ 2.766584] usbcore: registered new interface driver asix [ 2.772167] usbcore: registered new interface driver ax88179_178a [ 2.778292] usbcore: registered new interface driver cdc_ether [ 2.783983] usbcore: registered new interface driver net1080 [ 2.789582] usbcore: registered new interface driver cdc_subset [ 2.795911] usbcore: registered new interface driver zaurus [ 2.801594] usbcore: registered new interface driver cdc_ncm [ 2.806997] usbcore: registered new interface driver aqc111 [ 2.812612] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.818755] ohci-pci: OHCI PCI platform driver [ 2.823034] ohci-platform: OHCI generic platform driver [ 2.828975] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.835249] usbcore: registered new interface driver uas [ 2.839327] usbcore: registered new interface driver usb-storage [ 2.845412] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.851627] mousedev: PS/2 mouse device common for all mice [ 2.856540] usbcore: registered new interface driver xpad [ 2.864260] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.867449] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.875257] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.881513] i2c /dev entries driver [ 2.885104] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.890616] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.895948] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.901311] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.906650] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.912238] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.917710] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.929391] device-mapper: uevent: version 1.0.3 [ 2.929844] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.937863] cpuidle: Initializing cpuidle driver [ 2.941809] sdhci: Secure Digital Host Controller Interface driver [ 2.946814] sdhci: Copyright(c) Pierre Ossman [ 2.950947] Synopsys Designware Multimedia Card Interface Driver [ 2.957324] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.963068] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.963746] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.976195] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.993786] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.002550] vdd-1v0: supplied by regulator-dummy [ 3.007883] vdd-1v8-hs: supplied by regulator-dummy [ 3.012584] vdd-1v8-ls: supplied by regulator-dummy [ 3.017356] vdd-1v8-ao: supplied by regulator-dummy [ 3.021138] vddio-ddr-1v1: supplied by regulator-dummy [ 3.025500] vdd-rtc: supplied by regulator-dummy [ 3.027079] spmic-ldo1: supplied by regulator-dummy [ 3.028253] vdd-ao-3v3: supplied by regulator-dummy [ 3.034239] vddio-emmc-3v3: supplied by regulator-dummy [ 3.040355] spmic-ldo4: supplied by regulator-dummy [ 3.041520] vdd-usb-3v3: supplied by regulator-dummy [ 3.047896] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.053967] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.059348] spmic-ldo8: supplied by vdd-1v8-ls [ 3.060737] gpio-510 (gpio_default): hogged as output/high [ 3.063309] gpio-511 (gpio_default): hogged as output/high [ 3.070340] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.208776] max77686-rtc max77620-rtc: registered as rtc0 [ 3.210088] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.210379] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.916312] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.917234] hid: raw HID events driver (C) Jiri Kosina [ 3.917894] usbcore: registered new interface driver usbhid [ 3.918037] usbhid: USB HID core driver [ 3.919674] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.920877] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.048375] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.124103] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.538 ms) ÿá[ 4.006306] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.006901] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.007950] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.008659] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.010216] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.010868] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.011401] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.012737] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.013066] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.014893] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.022742] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.029345] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.034424] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.040763] denver_knobs_init:MTS_VERSION:55637613 [ 4.052556] t19x_cache tegra-cache: probed [ 4.054630] optee: probing for conduit method. [ 4.055402] optee: revision 3.16 (65cc2218) [ 4.056272] optee: dynamic shared memory is enabled [ 4.061212] optee: initialized driver [ 4.067784] nvpmodel: initialized successfully [ 4.068824] tegra_hv: get_hvd: not initialized yet [ 4.073704] user_ivc_mempool: hypervisor not present [ 4.079794] usbcore: registered new interface driver snd-usb-audio [ 4.086016] u32 classifier [ 4.087416] input device check on [ 4.091226] Actions configured [ 4.094491] Initializing XFRM netlink socket [ 4.099665] NET: Registered protocol family 10 [ 4.105539] Segment Routing with IPv6 [ 4.106979] NET: Registered protocol family 17 [ 4.111041] NET: Registered protocol family 15 [ 4.115649] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.129550] Bluetooth: RFCOMM socket layer initialized [ 4.133816] Bluetooth: RFCOMM ver 1.11 [ 4.137798] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.143464] Bluetooth: HIDP socket layer initialized [ 4.149605] 9pnet: Installing 9P2000 support [ 4.153138] Key type dns_resolver registered [ 4.158742] registered taskstats version 1 [ 4.161377] Loading compiled-in X.509 certificates [ 4.173761] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.177481] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.186999] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.189505] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.198056] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.206521] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.324238] tegra194-pcie 14160000.pcie: Link up [ 4.326934] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.327142] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.327291] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.327527] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.327720] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.328099] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.328550] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.338828] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.339357] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.339835] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.341407] pci 0004:01:00.0: supports D1 D2 [ 4.341584] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.350640] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.351006] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.351262] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.351823] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.352105] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.352783] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.358843] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.366242] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.374866] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.385149] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.389995] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.395328] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.402203] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.410860] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.412686] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.421117] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.429695] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.536264] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.536811] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.537065] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.537229] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.537495] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.537731] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.538087] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.538488] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.553317] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.553742] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.555513] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.557163] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.558470] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.559892] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.560777] pci 0005:00:00.0: Removing from iommu group 7 [ 5.561045] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.591544] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.612744] host1x 13e10000.host1x: initialized [ 5.614122] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.614940] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.615830] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.616645] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.617470] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.618105] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.618913] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.619541] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.629633] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.636379] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.646508] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.653279] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.663240] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.670440] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.680485] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.687118] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.697208] falcon 15340000.vic: Adding to iommu group 17 [ 5.711591] falcon 15340000.vic: initialized [ 5.712659] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.717717] falcon 15380000.nvjpg: initialized [ 5.718241] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.730709] falcon 154c0000.nvenc: initialized [ 5.731304] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.739891] falcon 15a80000.nvenc1: initialized [ 5.740491] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.752387] nvdec 15480000.nvdec: initialized [ 5.753033] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.761860] nvdec 15140000.nvdec1: initialized [ 5.762387] tsec 15500000.tsec: Adding to iommu group 18 [ 5.768250] tsec 15500000.tsec: initialized [ 5.768700] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.777165] tsec 15100000.tsecb: initialized [ 5.780761] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.806929] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.817790] gpio-374 (wifi-enable): hogged as output/high [ 5.818108] gpio-431 (camera-control-output-low): hogged as output/low [ 5.818405] gpio-432 (camera-control-output-low): hogged as output/low [ 5.820270] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.821856] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.822476] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.828530] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.833730] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.839737] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.845167] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.853404] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.860678] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.872334] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.877677] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.883283] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.892400] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.901583] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.908745] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.916192] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.922638] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.932412] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.938293] pva 16000000.pva0: Adding to iommu group 22 [ 5.963584] pva 16000000.pva0: initialized [ 5.968671] pva 16800000.pva1: Adding to iommu group 23 [ 5.979432] pva 16800000.pva1: initialized [ 5.983076] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.995425] nvdla 15880000.nvdla0: initialized [ 5.996870] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.012843] nvdla 158c0000.nvdla1: initialized [ 6.017089] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.017413] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.017562] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.017615] tegradc 15200000.display: Adding to iommu group 26 [ 6.018006] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.018390] tegradccommon 15200000.display-hub: dma mapping done [ 6.019762] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.022508] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.026081] tegradc 15210000.display: Adding to iommu group 26 [ 6.026184] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.026279] generic_infoframe_type: 0x87 [ 6.026407] tegradc 15200000.display: DT parsed successfully [ 6.026497] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.028217] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.057847] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.063798] tegra_cec 3960000.tegra_cec: probed [ 6.065016] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.071925] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.071933] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.082566] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.093274] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.098621] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.117533] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.117964] kfuse 3830000.kfuse: initialized [ 6.134335] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.139256] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.139971] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.146511] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.159730] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.160088] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.167839] tegradc 15210000.display: disp0 connected to head1->sor [ 6.176867] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.181050] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.187576] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.194247] tegradc 15210000.display: DT parsed successfully [ 6.204879] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.208366] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.222991] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.242470] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.242823] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.246253] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.254285] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.262971] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.269710] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.277300] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.284632] usb usb1: Product: xHCI Host Controller [ 6.289269] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.295559] usb usb1: SerialNumber: 3610000.xhci [ 6.301330] hub 1-0:1.0: USB hub found [ 6.304418] hub 1-0:1.0: 4 ports detected [ 6.309034] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.313531] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.321387] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.328971] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.336992] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.343976] usb usb2: Product: xHCI Host Controller [ 6.348936] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.355399] usb usb2: SerialNumber: 3610000.xhci [ 6.361028] hub 2-0:1.0: USB hub found [ 6.363638] hub 2-0:1.0: 4 ports detected [ 6.405060] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.410841] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.412002] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.412255] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.425122] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1904000 KHz, changing to: 1907200 KHz [ 6.426201] tegra194-cpufreq ccplex: probed with BWMGR [ 6.427517] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.428278] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.428800] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.430186] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.439485] mmc0: CQHCI version 5.10 [ 6.441686] tegra194-vi5 15c10000.vi: initialized [ 6.443162] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.445397] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.447469] generic_infoframe_type: 0x87 [ 6.454249] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.457631] tegradc 15200000.display: DT parsed successfully [ 6.457681] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.466056] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.485860] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.486466] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.492616] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.499757] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.501074] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.501078] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.501421] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.507300] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.512209] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.515330] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.523234] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.531805] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.537660] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.545292] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.551824] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.556727] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.558802] tegradc 15200000.display: probed [ 6.574085] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.581163] nvethernet 2490000.ethernet: Macsec not supported [ 6.591125] mmc0: Command Queue Engine enabled [ 6.598189] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.603809] mmc0: periodic cache flush enabled [ 6.603828] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.609677] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.615606] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.621086] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.625221] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.633954] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.648994] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.651157] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.690394] Console: switching to colour frame buffer device 240x67 [ 6.696330] tegradc 15200000.display: fb registered [ 6.701198] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.707916] tegra-se-nvhost 15810000.se: initialized [ 6.708087] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.721782] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.722539] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.730129] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.736652] tegra-se-nvhost 15820000.se: initialized [ 6.742843] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.747620] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.754337] tegra-se-nvhost 15830000.se: initialized [ 6.755851] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.759419] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.766837] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.766851] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.773654] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.780383] usb 1-2: Manufacturer: Generic [ 6.782560] hub 1-2:1.0: USB hub found [ 6.785721] tegra-se-nvhost 15840000.se: initialized [ 6.790400] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.791544] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.795472] hub 1-2:1.0: 4 ports detected [ 6.796921] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.798483] tegra_actmon d230000.actmon: in actmon_register()... [ 6.799405] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.799457] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.804486] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.813856] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.821005] hvc_sysfs: hypervisor is not present [ 6.824856] Extcon AUX1(HDMI) enable [ 6.825005] tegradc 15210000.display: disp1 connected to head1->sor [ 6.857949] ALSA device list: [ 6.865146] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.869720] No soundcards found. [ 6.893384] tegradc 15210000.display: DT parsed successfully [ 6.894173] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.898630] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.914372] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.920573] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.933643] tegradc 15210000.display: probed [ 6.934042] tegradc 15210000.display: fb registered [ 6.939704] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.942126] Freeing unused kernel memory: 3968K [ 6.943341] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.955806] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.961367] tegradc 15200000.display: blank - powerdown [ 6.964279] Run /init as init process [ 6.964790] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.964796] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.964800] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.964804] usb 2-3: Manufacturer: Generic [ 6.975448] hub 2-3:1.0: USB hub found [ 6.977328] hub 2-3:1.0: 4 ports detected [ 7.007479] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.007484] Extcon AUX1(HDMI) disable [ 7.030721] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.031541] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.042922] tegradc 15200000.display: unblank [ 7.043949] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.044155] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.048170] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.048174] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.049884] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.051653] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.055595] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.055599] Extcon AUX1(HDMI) enable [ 7.064194] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.068433] tegradc 15200000.display: sync windows ret = 246 [ 7.110866] tegradc 15210000.display: blank - powerdown [ 7.115954] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.115957] Extcon DP: HPD disabled [ 7.115961] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.115974] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.115979] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.148114] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.155059] Extcon HDMI: HPD enabled [ 7.158908] tegradc 15200000.display: hdmi: plugged [ 7.198354] Root device found: mmcblk0p1 [ 7.201633] Found dev node: /dev/mmcblk0p1 [ 7.213383] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.214804] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.216209] usb 1-3: Product: Bluetooth Radio [ 7.217473] usb 1-3: Manufacturer: Realtek [ 7.218725] usb 1-3: SerialNumber: 00e04c000001 [ 7.238073] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.243370] Rootfs mounted over mmcblk0p1 [ 7.280601] Switching from initrd to actual rootfs [ 7.425260] systemd[1]: System time before build time, advancing clock. [ 7.498629] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.503544] systemd[1]: Detected architecture arm64. [ 7.544307] systemd[1]: Set hostname to . [ 7.701794] systemd-sysv-generator[244]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.049865] random: systemd: uninitialized urandom read (16 bytes read) [ 8.051568] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.053172] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.058687] systemd[1]: Created slice system-modprobe.slice. [ 8.062270] random: systemd: uninitialized urandom read (16 bytes read) [ 8.064897] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.067867] random: systemd: uninitialized urandom read (16 bytes read) [ 8.070462] systemd[1]: Created slice User and Session Slice. [ 8.073976] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.078187] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.081615] systemd[1]: Reached target User and Group Name Lookups. [ 8.084820] systemd[1]: Reached target Slices. [ 8.089468] systemd[1]: Reached target Swap. [ 8.095889] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.102071] systemd[1]: Listening on Syslog Socket. [ 8.108121] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.114057] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.118770] systemd[1]: Listening on Journal Audit Socket. [ 8.122460] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.126295] systemd[1]: Listening on Journal Socket. [ 8.131368] systemd[1]: Listening on udev Control Socket. [ 8.136493] systemd[1]: Listening on udev Kernel Socket. [ 8.145160] systemd[1]: Mounting Huge Pages File System... [ 8.153557] systemd[1]: Mounting POSIX Message Queue File System... [ 8.161702] systemd[1]: Mounting RPC Pipe File System... [ 8.170348] systemd[1]: Mounting Kernel Debug File System... [ 8.178440] systemd[1]: Mounting Kernel Trace File System... [ 8.187912] systemd[1]: Starting Journal Service... [ 8.196683] systemd[1]: Starting Set the console keyboard layout... [ 8.204935] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.208670] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.215138] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.223109] systemd[1]: Started Nameserver information manager. [ 8.227815] systemd[1]: Reached target Network (Pre). [ 8.234681] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.236890] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.243287] systemd[1]: Starting Load Kernel Modules... [ 8.251044] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.259882] systemd[1]: Starting udev Coldplug all Devices... [ 8.269727] systemd[1]: Mounted Huge Pages File System. [ 8.273463] systemd[1]: Mounted POSIX Message Queue File System. [ 8.277175] systemd[1]: Mounted RPC Pipe File System. [ 8.279539] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.286120] systemd[1]: Mounted Kernel Debug File System. [ 8.287989] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.288859] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.288864] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.288874] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.288878] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.289068] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.289280] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.289448] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.289456] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.307567] systemd[1]: Mounted Kernel Trace File System. [ 8.317106] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.323565] systemd[1]: nvfb-udev.service: Succeeded. [ 8.327921] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.340413] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.353545] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.355327] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.361618] systemd[1]: Starting Load/Save Random Seed... [ 8.371172] systemd[1]: Starting Create System Users... [ 8.376544] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.376544] [ 8.407106] systemd[1]: Finished Load Kernel Modules. [ 8.411496] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.418348] systemd[1]: Mounting Kernel Configuration File System... [ 8.427471] systemd[1]: Started OP-TEE Client Supplicant. [ 8.435986] systemd[1]: Starting Apply Kernel Variables... [ 8.443277] systemd[1]: Mounted Kernel Configuration File System. [ 8.454828] systemd[1]: Finished Create System Users. [ 8.463304] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.762758] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.771626] imx219 9-0010: board setup failed [ 9.773154] imx219: probe of 9-0010 failed with error -121 [ 9.785525] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.792437] imx219 10-0010: board setup failed [ 9.793937] imx219: probe of 10-0010 failed with error -121 [ 9.880353] hot-surface-alert cooling state: 0 -> 1 [ 9.889051] random: crng init done [ 9.890310] random: 7 urandom warning(s) missed due to ratelimiting [ 11.263788] using random self ethernet address [ 11.276808] using random host ethernet address [ 11.381244] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.382941] Creating 1 MTD partitions on "spi6.0": [ 11.391811] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.466466] using random self ethernet address [ 12.468070] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.807905] nvidia: loading out-of-tree module taints kernel. [ 58.750119] watchdog: watchdog0: watchdog did not stop! [ 59.229069] Trying to unregister non-registered hwtime source [ 62.294429] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.295931] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 àÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.614] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.650] I> edid read success [0003.651] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.652] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.736] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.750] initializing target [0003.751] calling apps_init() [0003.752] starting app kernel_boot_app [0003.753] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000684] Console: colour dummy device 80x25 [ 0.002120] printk: console [tty0] enabled [ 0.002190] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002224] pid_max: default: 32768 minimum: 301 [ 0.002462] LSM: Security Framework initializing [ 0.002520] Yama: becoming mindful. [ 0.002561] SELinux: Initializing. [ 0.002745] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002783] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005696] rcu: Hierarchical SRCU implementation. [ 0.005960] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006633] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006703] DTB Build time: Aug 10 2022 20:31:49 [ 0.009357] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009585] Remapping and enabling EFI services. [ 0.011757] smp: Bringing up secondary CPUs ... [ 0.041009] Detected PIPT I-cache on CPU1 [ 0.041120] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070645] Detected PIPT I-cache on CPU2 [ 0.070794] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100409] Detected PIPT I-cache on CPU3 [ 0.100552] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130300] Detected PIPT I-cache on CPU4 [ 0.130399] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160189] Detected PIPT I-cache on CPU5 [ 0.160331] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160651] smp: Brought up 1 node, 6 CPUs [ 0.160980] SMP: Total of 6 processors activated. [ 0.161003] CPU features: detected: Privileged Access Never [ 0.161016] CPU features: detected: LSE atomic instructions [ 0.161029] CPU features: detected: User Access Override [ 0.161063] CPU features: detected: 32-bit EL0 Support [ 0.161076] CPU features: detected: RAS Extension Support [ 0.161090] CPU features: detected: CRC32 instructions [ 0.161104] CPU features: detected: 32-bit EL1 Support [ 0.229391] CPU: All CPU(s) started at EL2 [ 0.236386] devtmpfs: initialized [ 0.305143] Registered cp15_barrier emulation handler [ 0.305301] Registered setend emulation handler [ 0.305348] KASLR enabled [ 0.305746] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.305805] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.308104] pinctrl core: initialized pinctrl subsystem [ 0.309406] SMBIOS 3.0.0 present. [ 0.309454] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.310391] NET: Registered protocol family 16 [ 0.313062] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.313848] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.315262] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.315372] audit: initializing netlink subsys (disabled) [ 0.315764] audit: type=2000 audit(0.312:1): state=initialized audit_enabled=0 res=1 [ 0.316477] thermal_sys: Registered thermal governor 'step_wise' [ 0.316488] thermal_sys: Registered thermal governor 'power_allocator' [ 0.316528] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.320163] cpuidle: using governor menu [ 0.321091] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.321585] ASID allocator initialised with 32768 entries [ 0.321987] Serial: AMBA PL011 UART driver [ 0.327159] Tegra reboot handler registered. [ 0.425457] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.425660] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.425879] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.425942] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.426141] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.426201] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.426402] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.426460] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.426618] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.426673] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.429954] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.430003] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.430042] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.430079] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.430121] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.430158] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.430204] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.430245] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.430285] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.430318] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.430350] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.430407] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.430442] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.430518] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.430574] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.430609] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.430642] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.430785] mc-err: mcerr ops are set to t19x [ 0.448570] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.448627] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.448660] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.448691] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.456918] ACPI: Interpreter disabled. [ 0.458595] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.460302] iommu: Default domain type: Translated [ 0.460387] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.460988] SCSI subsystem initialized [ 0.461208] usbcore: registered new interface driver usbfs [ 0.461270] usbcore: registered new interface driver hub [ 0.461353] usbcore: registered new device driver usb [ 0.461899] mc: Linux media interface: v0.10 [ 0.461949] videodev: Linux video capture interface: v2.00 [ 0.462320] pps_core: LinuxPPS API ver. 1 registered [ 0.462340] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.462373] PTP clock support registered [ 0.462639] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.463147] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.463247] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.463943] Registered efivars operations [ 0.472169] FPGA manager framework [ 0.472336] Advanced Linux Sound Architecture Driver Initialized. [ 0.473210] Bluetooth: Core ver 2.22 [ 0.473264] NET: Registered protocol family 31 [ 0.473281] Bluetooth: HCI device and connection manager initialized [ 0.473304] Bluetooth: HCI socket layer initialized [ 0.473323] Bluetooth: L2CAP socket layer initialized [ 0.473353] Bluetooth: SCO socket layer initialized [ 0.475301] camchar: rtcpu character device driver loaded [ 0.476391] clocksource: Switched to clocksource arch_sys_counter [ 0.886947] VFS: Disk quotas dquot_6.6.0 [ 0.887056] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.887510] pnp: PnP ACPI: disabled [ 0.901435] la/ptsa driver initialized. [ 0.901665] NET: Registered protocol family 2 [ 0.901897] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.910266] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.910426] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.910802] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.911431] TCP: Hash tables configured (established 65536 bind 65536) [ 0.911609] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.911749] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.912074] NET: Registered protocol family 1 [ 0.913037] RPC: Registered named UNIX socket transport module. [ 0.913079] RPC: Registered udp transport module. [ 0.913100] RPC: Registered tcp transport module. [ 0.913120] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.913151] PCI: CLS 0 bytes, default 64 [ 0.913490] Trying to unpack rootfs image as initramfs... [ 1.180992] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.183841] Freeing initrd memory: 8196K [ 1.188215] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.188266] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.188304] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.188660] kvm [1]: IPA Size Limit: 40 bits [ 1.189201] kvm [1]: vgic interrupt IRQ9 [ 1.189753] kvm [1]: VHE mode initialized successfully [ 1.191198] Initialise system trusted keyrings [ 1.191575] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.197664] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.198554] NFS: Registering the id_resolver key type [ 1.198599] Key type id_resolver registered [ 1.198616] Key type id_legacy registered [ 1.198705] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.198733] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.198774] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.208700] NET: Registered protocol family 38 [ 1.208759] Key type asymmetric registered [ 1.208778] Asymmetric key parser 'x509' registered [ 1.208850] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.209127] io scheduler mq-deadline registered [ 1.209147] io scheduler kyber registered [ 1.214539] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.217437] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.217566] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.217672] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.217752] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.217854] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.222998] scrncapt: init (heads:4 wins:6 planes:4) [ 1.223038] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.223948] EINJ: ACPI disabled. [ 1.227056] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.227082] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.227126] tegra-pmc: ### PMC reset level: L1 [ 1.227141] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.227192] tegra-pmc: PMC Prod config success [ 1.232002] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.237780] random: fast init done [ 1.248796] printk: console [ttyTCU0] enabled [ 2.789564] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.793993] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.798666] arm-smmu 10000000.iommu: stage 1 translation [ 2.803815] arm-smmu 10000000.iommu: stage 2 translation [ 2.809558] arm-smmu 10000000.iommu: nested translation [ 2.814645] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.821820] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.832685] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.835179] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.841504] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.849608] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.854809] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.859264] arm-smmu 12000000.iommu: stage 1 translation [ 2.865033] arm-smmu 12000000.iommu: stage 2 translation [ 2.870202] arm-smmu 12000000.iommu: nested translation [ 2.875891] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.883063] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.893701] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.896174] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.902491] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.910215] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.919573] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.922896] tegra_profiler: auth: init [ 2.927422] THERMAL EST: found 3 subdevs [ 2.930596] THERMAL EST num_resources: 0 [ 2.934683] [THERMAL EST subdev 0] [ 2.937751] [THERMAL EST subdev 1] [ 2.941422] [THERMAL EST subdev 2] [ 2.944408] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.951155] THERMAL EST: thz register success. [ 2.955363] THERMAL EST: end of probe, return err: 0 [ 2.960389] nvsciipc: loaded module [ 2.967411] tun: Universal TUN/TAP device driver, 1.6 [ 2.970251] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.976440] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.981768] e1000e: Intel(R) PRO/1000 Network Driver [ 2.986918] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.992739] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.998292] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.004629] PPP generic driver version 2.4.2 [ 3.008511] PPP BSD Compression module registered [ 3.013318] PPP Deflate Compression module registered [ 3.018517] PPP MPPE Compression module registered [ 3.023301] usbcore: registered new interface driver r8152 [ 3.029046] usbcore: registered new interface driver asix [ 3.034126] usbcore: registered new interface driver ax88179_178a [ 3.040239] usbcore: registered new interface driver cdc_ether [ 3.046448] usbcore: registered new interface driver net1080 [ 3.052052] usbcore: registered new interface driver cdc_subset [ 3.057862] usbcore: registered new interface driver zaurus [ 3.063525] usbcore: registered new interface driver cdc_ncm [ 3.069211] usbcore: registered new interface driver aqc111 [ 3.075373] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.081189] ohci-pci: OHCI PCI platform driver [ 3.085479] ohci-platform: OHCI generic platform driver [ 3.091356] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.097566] usbcore: registered new interface driver uas [ 3.101510] usbcore: registered new interface driver usb-storage [ 3.107920] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.113704] mousedev: PS/2 mouse device common for all mice [ 3.118932] usbcore: registered new interface driver xpad [ 3.126936] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.129683] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.137200] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.143710] i2c /dev entries driver [ 3.147324] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.152911] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.158419] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.163813] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.169183] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.174732] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.180135] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.193381] device-mapper: uevent: version 1.0.3 [ 3.193868] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.200237] cpuidle: Initializing cpuidle driver [ 3.204263] sdhci: Secure Digital Host Controller Interface driver [ 3.209019] sdhci: Copyright(c) Pierre Ossman [ 3.213371] Synopsys Designware Multimedia Card Interface Driver [ 3.219304] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.225275] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.226072] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.238547] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.260523] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.270094] vdd-1v0: supplied by regulator-dummy [ 3.275520] vdd-1v8-hs: supplied by regulator-dummy [ 3.280406] vdd-1v8-ls: supplied by regulator-dummy [ 3.285248] vdd-1v8-ao: supplied by regulator-dummy [ 3.289222] vddio-ddr-1v1: supplied by regulator-dummy [ 3.293802] vdd-rtc: supplied by regulator-dummy [ 3.295519] spmic-ldo1: supplied by regulator-dummy [ 3.296817] vdd-ao-3v3: supplied by regulator-dummy [ 3.302981] vddio-emmc-3v3: supplied by regulator-dummy [ 3.309275] spmic-ldo4: supplied by regulator-dummy [ 3.310503] vdd-usb-3v3: supplied by regulator-dummy [ 3.316646] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.322852] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.328408] spmic-ldo8: supplied by vdd-1v8-ls [ 3.329904] gpio-510 (gpio_default): hogged as output/high [ 3.331277] gpio-511 (gpio_default): hogged as output/high [ 3.334139] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.471223] max77686-rtc max77620-rtc: registered as rtc0 [ 3.472274] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.472613] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.305439] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.306519] hid: raw HID events driver (C) Jiri Kosina [ 4.307480] usbcore: registered new interface driver usbhid [ 4.307615] usbhid: USB HID core driver [ 4.309752] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.311113] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.088052] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.162238] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 74.995 ms) ÿá[ 4.396049] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.396821] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.398218] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.399279] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.401251] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.402079] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.402631] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.403967] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.404319] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.407460] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.412034] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.418279] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.423176] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.429272] denver_knobs_init:MTS_VERSION:55637613 [ 4.442055] t19x_cache tegra-cache: probed [ 4.446383] optee: probing for conduit method. [ 4.447276] optee: revision 3.16 (65cc2218) [ 4.448629] optee: dynamic shared memory is enabled [ 4.450617] optee: initialized driver [ 4.457929] nvpmodel: initialized successfully [ 4.458627] tegra_hv: get_hvd: not initialized yet [ 4.462896] user_ivc_mempool: hypervisor not present [ 4.468716] usbcore: registered new interface driver snd-usb-audio [ 4.475009] u32 classifier [ 4.476331] input device check on [ 4.480048] Actions configured [ 4.483951] Initializing XFRM netlink socket [ 4.489009] NET: Registered protocol family 10 [ 4.494897] Segment Routing with IPv6 [ 4.495939] NET: Registered protocol family 17 [ 4.500462] NET: Registered protocol family 15 [ 4.504711] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.518364] Bluetooth: RFCOMM socket layer initialized [ 4.523130] Bluetooth: RFCOMM ver 1.11 [ 4.526768] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.532876] Bluetooth: HIDP socket layer initialized [ 4.538352] 9pnet: Installing 9P2000 support [ 4.542094] Key type dns_resolver registered [ 4.547950] registered taskstats version 1 [ 4.550499] Loading compiled-in X.509 certificates [ 4.564080] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.566403] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.576762] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.578668] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.587030] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.595635] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.712476] tegra194-pcie 14160000.pcie: Link up [ 4.715434] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.715761] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.716015] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.716447] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.716919] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.717563] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.718188] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.730639] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.731294] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.731774] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.733341] pci 0004:01:00.0: supports D1 D2 [ 4.733535] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.743415] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.743869] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.744139] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.744594] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.745043] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.745333] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.746976] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.754435] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.763173] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.773237] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.777971] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.783290] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.790351] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.799888] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.801199] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.809386] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.818056] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.933253] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.933840] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.934047] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.934269] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.934679] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.935030] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.935664] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.936282] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.956870] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.957351] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.959374] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.961105] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.962683] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.964145] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.965453] pci 0005:00:00.0: Removing from iommu group 7 [ 5.965745] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 6.010236] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.038878] host1x 13e10000.host1x: initialized [ 6.040725] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.041688] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.042991] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.043748] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.045149] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.045897] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.047052] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.047866] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.049140] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.049878] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.050768] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.051522] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.060907] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.067264] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.077214] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.084514] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.094187] falcon 15340000.vic: Adding to iommu group 17 [ 6.108502] falcon 15340000.vic: initialized [ 6.109763] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.114891] falcon 15380000.nvjpg: initialized [ 6.115516] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.127372] falcon 154c0000.nvenc: initialized [ 6.128057] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.137582] falcon 15a80000.nvenc1: initialized [ 6.138568] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.150888] nvdec 15480000.nvdec: initialized [ 6.151542] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.161476] nvdec 15140000.nvdec1: initialized [ 6.162007] tsec 15500000.tsec: Adding to iommu group 18 [ 6.167636] tsec 15500000.tsec: initialized [ 6.168079] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.174629] tsec 15100000.tsecb: initialized [ 6.178569] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.206625] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.220762] gpio-374 (wifi-enable): hogged as output/high [ 6.221086] gpio-431 (camera-control-output-low): hogged as output/low [ 6.221406] gpio-432 (camera-control-output-low): hogged as output/low [ 6.223144] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.225092] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.225636] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.227461] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.230714] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.236568] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.242266] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.250741] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.257794] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.269620] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.274327] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.280256] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.289394] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.298290] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.305561] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.313201] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.319702] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.329089] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.335327] pva 16000000.pva0: Adding to iommu group 22 [ 6.362019] pva 16000000.pva0: initialized [ 6.366906] pva 16800000.pva1: Adding to iommu group 23 [ 6.378431] pva 16800000.pva1: initialized [ 6.383306] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.397687] nvdla 15880000.nvdla0: initialized [ 6.399044] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.408790] nvdla 158c0000.nvdla1: initialized [ 6.412977] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.413277] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.413392] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.413702] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.414292] tegradc 15210000.display: Adding to iommu group 26 [ 6.414328] tegradccommon 15200000.display-hub: dma mapping done [ 6.414404] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.414510] tegradc 15200000.display: Adding to iommu group 26 [ 6.415010] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.424612] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.424916] tegra_cec 3960000.tegra_cec: probed [ 6.430605] generic_infoframe_type: 0x87 [ 6.437987] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.441953] tegradc 15200000.display: DT parsed successfully [ 6.446058] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.451531] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.458991] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.466992] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.471777] kfuse 3830000.kfuse: initialized [ 6.477891] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.486886] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.490469] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.498640] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.506296] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.513496] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.519751] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.520974] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.526352] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.534659] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.539198] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.549505] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.558256] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.566627] tegradc 15210000.display: disp0 connected to head1->sor [ 6.571677] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.577317] random: crng init done [ 6.577628] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.577838] tegradc 15210000.display: DT parsed successfully [ 6.577852] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.623464] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.644336] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.644890] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.646206] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.654740] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.663463] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.670045] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.677895] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.685173] usb usb1: Product: xHCI Host Controller [ 6.689709] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.696005] usb usb1: SerialNumber: 3610000.xhci [ 6.701822] hub 1-0:1.0: USB hub found [ 6.704593] hub 1-0:1.0: 4 ports detected [ 6.709440] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.714004] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.721812] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.729597] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.737386] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.744630] usb usb2: Product: xHCI Host Controller [ 6.749346] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.755559] usb usb2: SerialNumber: 3610000.xhci [ 6.761025] hub 2-0:1.0: USB hub found [ 6.763987] hub 2-0:1.0: 4 ports detected [ 6.806444] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.812298] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.813970] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.814235] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.827686] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.828767] tegra194-cpufreq ccplex: probed with BWMGR [ 6.830044] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.830532] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.831037] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.832181] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.838391] tegra194-vi5 15c10000.vi: initialized [ 6.839596] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.841657] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.844228] generic_infoframe_type: 0x87 [ 6.851086] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.854392] tegradc 15200000.display: DT parsed successfully [ 6.862773] mmc0: CQHCI version 5.10 [ 6.862783] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.862792] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.862797] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.862802] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.868402] tegradc 15200000.display: Display dc.000000001343715c registered with id=0 [ 6.868427] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.868433] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.868438] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.869740] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.869788] nvethernet 2490000.ethernet: Macsec not supported [ 6.871071] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.872018] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.879100] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.885107] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.891686] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.891691] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.892053] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.898367] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.899096] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.906221] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.906432] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.913681] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.920391] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.927950] tegra-se-nvhost 15810000.se: initialized [ 6.933776] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.936593] tegradc 15200000.display: probed [ 6.944648] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.972408] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.977329] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.989357] mmc0: Command Queue Engine enabled [ 6.991668] tegra-se-nvhost 15820000.se: initialized [ 6.997493] mmc0: periodic cache flush enabled [ 6.997528] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.007548] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.012523] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.022836] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.028875] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.037051] tegra-se-nvhost 15830000.se: initialized [ 7.052591] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.054561] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.136256] Console: switching to colour frame buffer device 240x67 [ 7.136419] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.142065] tegradc 15200000.display: fb registered [ 7.149109] tegra-se-nvhost 15840000.se: initialized [ 7.152097] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.152103] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.152107] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.152111] usb 1-2: Manufacturer: Generic [ 7.153412] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.154017] hub 1-2:1.0: USB hub found [ 7.155075] hub 1-2:1.0: 4 ports detected [ 7.160292] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.196225] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.204092] tegra_actmon d230000.actmon: in actmon_register()... [ 7.214487] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.214654] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.226465] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.234437] hvc_sysfs: hypervisor is not present [ 7.266800] ALSA device list: [ 7.266922] No soundcards found. [ 7.273520] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.294278] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.295653] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.295877] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.296879] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.297091] Extcon AUX1(HDMI) enable [ 7.297350] tegradc 15210000.display: disp1 connected to head1->sor [ 7.297760] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.301272] tegradc 15210000.display: DT parsed successfully [ 7.306916] tegradc 15210000.display: Display dc.00000000344cc103 registered with id=1 [ 7.310415] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.314768] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.323240] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.323250] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.329200] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.336457] usb 2-3: Manufacturer: Generic [ 7.347161] hub 2-3:1.0: USB hub found [ 7.354526] tegradc 15210000.display: probed [ 7.360158] hub 2-3:1.0: 4 ports detected [ 7.364046] tegradc 15210000.display: fb registered [ 7.372577] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.376285] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.378062] Freeing unused kernel memory: 3968K [ 7.384031] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.394115] tegradc 15210000.display: blank - powerdown [ 7.399199] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.400476] Run /init as init process [ 7.407325] Extcon DP: HPD disabled [ 7.414566] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.421310] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.421316] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.428403] usb 1-3: new full-speed USB device number 3 using tegra-xusb ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.449090] tegradc 15200000.display: blank - powerdown [ 7.488291] Root device found: mmcblk0p1 [ 7.488403] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.490396] Found dev node: /dev/mmcblk0p1 [ 7.494667] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.494672] Extcon AUX1(HDMI) disable [ 7.517990] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.518885] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.526113] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.530266] Rootfs mounted over mmcblk0p1 [ 7.531129] tegradc 15200000.display: unblank [ 7.532215] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.532408] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.538452] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.540426] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.544457] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.544461] Extcon AUX1(HDMI) enable [ 7.552938] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.552943] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.557202] tegradc 15200000.display: sync windows ret = 247 [ 7.573856] Switching from initrd to actual rootfs [ 7.592646] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.593801] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.596087] Extcon HDMI: HPD enabled [ 7.604503] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.604508] usb 1-3: Product: Bluetooth Radio [ 7.604519] usb 1-3: Manufacturer: Realtek [ 7.608434] tegradc 15200000.display: hdmi: plugged [ 7.615690] usb 1-3: SerialNumber: 00e04c000001 [ 7.760767] systemd[1]: System time before build time, advancing clock. [ 7.830066] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.835062] systemd[1]: Detected architecture arm64. [ 7.885128] systemd[1]: Set hostname to . [ 8.050108] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.390298] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.392038] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.397608] systemd[1]: Created slice system-modprobe.slice. [ 8.402173] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.406336] systemd[1]: Created slice User and Session Slice. [ 8.409984] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.414138] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.417588] systemd[1]: Reached target User and Group Name Lookups. [ 8.420808] systemd[1]: Reached target Slices. [ 8.423936] systemd[1]: Reached target Swap. [ 8.427903] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.431610] systemd[1]: Listening on Syslog Socket. [ 8.435238] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.438737] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.443073] systemd[1]: Listening on Journal Audit Socket. [ 8.446718] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.450578] systemd[1]: Listening on Journal Socket. [ 8.454288] systemd[1]: Listening on udev Control Socket. [ 8.459237] systemd[1]: Listening on udev Kernel Socket. [ 8.469178] systemd[1]: Mounting Huge Pages File System... [ 8.477425] systemd[1]: Mounting POSIX Message Queue File System... [ 8.485532] systemd[1]: Mounting RPC Pipe File System... [ 8.494260] systemd[1]: Mounting Kernel Debug File System... [ 8.502892] systemd[1]: Mounting Kernel Trace File System... [ 8.512903] systemd[1]: Starting Journal Service... [ 8.521710] systemd[1]: Starting Set the console keyboard layout... [ 8.529879] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.533537] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.539885] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.548448] systemd[1]: Started Nameserver information manager. [ 8.553771] systemd[1]: Reached target Network (Pre). [ 8.560609] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.560838] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.570708] systemd[1]: Starting Load Kernel Modules... [ 8.578368] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.586241] systemd[1]: Starting udev Coldplug all Devices... [ 8.596882] systemd[1]: Mounted Huge Pages File System. [ 8.600891] systemd[1]: Mounted POSIX Message Queue File System. [ 8.605551] systemd[1]: Mounted RPC Pipe File System. [ 8.607621] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.610303] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.612873] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.613475] systemd[1]: Mounted Kernel Debug File System. [ 8.614444] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.617436] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.617440] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.617612] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.617980] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.618133] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.618141] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.629554] systemd[1]: Mounted Kernel Trace File System. [ 8.637293] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.644053] systemd[1]: nvfb-udev.service: Succeeded. [ 8.648888] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.660384] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.672803] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.674628] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.683713] systemd[1]: Starting Load/Save Random Seed... [ 8.692268] systemd[1]: Starting Create System Users... [ 8.725634] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.725634] [ 8.747623] systemd[1]: Finished Load/Save Random Seed. [ 8.760747] systemd[1]: Finished Load Kernel Modules. [ 8.766327] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.773668] systemd[1]: Mounting Kernel Configuration File System... [ 8.782622] systemd[1]: Started OP-TEE Client Supplicant. [ 8.791622] systemd[1]: Starting Apply Kernel Variables... [ 8.802136] systemd[1]: Finished Set the console keyboard layout. [ 8.807635] systemd[1]: Mounted Kernel Configuration File System. [ 8.824317] systemd[1]: Finished Create System Users. [ 10.207051] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.216977] imx219 9-0010: board setup failed [ 10.218323] imx219: probe of 9-0010 failed with error -121 [ 10.223587] hot-surface-alert cooling state: 0 -> 1 [ 10.250109] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.260546] imx219 10-0010: board setup failed [ 10.261954] imx219: probe of 10-0010 failed with error -121 [ 10.593584] using random self ethernet address [ 10.594812] using random host ethernet address [ 11.732842] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.732848] Creating 1 MTD partitions on "spi6.0": [ 11.732857] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.078128] using random self ethernet address [ 12.079826] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.839079] nvidia: loading out-of-tree module taints kernel. [ 59.254107] watchdog: watchdog0: watchdog did not stop! [ 59.706047] Trying to unregister non-registered hwtime source [ 62.764735] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.766470] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.077] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.120] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.128] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.905] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.915] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.922] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.323] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.481] I> register 'maxim' power off handle [0003.482] I> virtual i2c enabled [0003.483] I> registered 'maxim,max20024' pmic [0003.483] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> hdmi cable connected [0003.600] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.606] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.642] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.644] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.688] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.733] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.743] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000682] Console: colour dummy device 80x25 [ 0.002044] printk: console [tty0] enabled [ 0.002108] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002144] pid_max: default: 32768 minimum: 301 [ 0.002317] LSM: Security Framework initializing [ 0.002376] Yama: becoming mindful. [ 0.002424] SELinux: Initializing. [ 0.002582] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002621] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005683] rcu: Hierarchical SRCU implementation. [ 0.005952] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006823] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006888] DTB Build time: Aug 10 2022 20:31:49 [ 0.009675] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009904] Remapping and enabling EFI services. [ 0.012150] smp: Bringing up secondary CPUs ... [ 0.041324] Detected PIPT I-cache on CPU1 [ 0.041415] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070902] Detected PIPT I-cache on CPU2 [ 0.070997] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100572] Detected PIPT I-cache on CPU3 [ 0.100712] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130424] Detected PIPT I-cache on CPU4 [ 0.130540] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160185] Detected PIPT I-cache on CPU5 [ 0.160336] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160738] smp: Brought up 1 node, 6 CPUs [ 0.160888] SMP: Total of 6 processors activated. [ 0.160930] CPU features: detected: Privileged Access Never [ 0.160950] CPU features: detected: LSE atomic instructions [ 0.160963] CPU features: detected: User Access Override [ 0.160976] CPU features: detected: 32-bit EL0 Support [ 0.160987] CPU features: detected: RAS Extension Support [ 0.160999] CPU features: detected: CRC32 instructions [ 0.161011] CPU features: detected: 32-bit EL1 Support [ 0.230848] CPU: All CPU(s) started at EL2 [ 0.237735] devtmpfs: initialized [ 0.285037] Registered cp15_barrier emulation handler [ 0.285134] Registered setend emulation handler [ 0.285156] KASLR enabled [ 0.285452] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285477] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286847] pinctrl core: initialized pinctrl subsystem [ 0.287846] SMBIOS 3.0.0 present. [ 0.287903] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289411] NET: Registered protocol family 16 [ 0.291406] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291913] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292623] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292678] audit: initializing netlink subsys (disabled) [ 0.292922] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293417] thermal_sys: Registered thermal governor 'step_wise' [ 0.293424] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293439] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295594] cpuidle: using governor menu [ 0.295955] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296378] ASID allocator initialised with 32768 entries [ 0.296607] Serial: AMBA PL011 UART driver [ 0.300069] Tegra reboot handler registered. [ 0.372071] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.372183] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.372370] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.372412] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.372590] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.372629] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.372743] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.372782] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372910] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372965] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.375240] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.375273] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.375301] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.375328] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.375356] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375382] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.375419] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375452] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375477] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375501] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.375524] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.375547] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.375569] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.375592] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.375617] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.375640] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.375662] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.375747] mc-err: mcerr ops are set to t19x [ 0.388107] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.388131] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.388145] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.388157] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.396565] ACPI: Interpreter disabled. [ 0.398431] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400359] iommu: Default domain type: Translated [ 0.400469] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.401073] SCSI subsystem initialized [ 0.401310] usbcore: registered new interface driver usbfs [ 0.401377] usbcore: registered new interface driver hub [ 0.401429] usbcore: registered new device driver usb [ 0.402492] mc: Linux media interface: v0.10 [ 0.402546] videodev: Linux video capture interface: v2.00 [ 0.403347] pps_core: LinuxPPS API ver. 1 registered [ 0.403368] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403399] PTP clock support registered [ 0.403864] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404321] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.404417] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.405504] Registered efivars operations [ 0.412862] FPGA manager framework [ 0.413012] Advanced Linux Sound Architecture Driver Initialized. [ 0.413770] Bluetooth: Core ver 2.22 [ 0.413824] NET: Registered protocol family 31 [ 0.413841] Bluetooth: HCI device and connection manager initialized [ 0.413890] Bluetooth: HCI socket layer initialized [ 0.413909] Bluetooth: L2CAP socket layer initialized [ 0.413938] Bluetooth: SCO socket layer initialized [ 0.416282] camchar: rtcpu character device driver loaded [ 0.417445] clocksource: Switched to clocksource arch_sys_counter [ 0.842278] VFS: Disk quotas dquot_6.6.0 [ 0.842379] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.842820] pnp: PnP ACPI: disabled [ 0.858076] la/ptsa driver initialized. [ 0.858262] NET: Registered protocol family 2 [ 0.858481] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.865939] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.866136] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.866489] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.867140] TCP: Hash tables configured (established 65536 bind 65536) [ 0.867310] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.867442] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.867712] NET: Registered protocol family 1 [ 0.868495] RPC: Registered named UNIX socket transport module. [ 0.868530] RPC: Registered udp transport module. [ 0.868545] RPC: Registered tcp transport module. [ 0.868559] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.868613] PCI: CLS 0 bytes, default 64 [ 0.868921] Trying to unpack rootfs image as initramfs... [ 1.135232] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.138164] Freeing initrd memory: 8196K [ 1.142983] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.143021] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.143054] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.143386] kvm [1]: IPA Size Limit: 40 bits [ 1.143878] kvm [1]: vgic interrupt IRQ9 [ 1.144407] kvm [1]: VHE mode initialized successfully [ 1.146147] Initialise system trusted keyrings [ 1.146419] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.153970] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.154949] NFS: Registering the id_resolver key type [ 1.154992] Key type id_resolver registered [ 1.155008] Key type id_legacy registered [ 1.155098] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.155129] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.155168] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.165529] NET: Registered protocol family 38 [ 1.165556] Key type asymmetric registered [ 1.165574] Asymmetric key parser 'x509' registered [ 1.165623] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.165894] io scheduler mq-deadline registered [ 1.165913] io scheduler kyber registered [ 1.172191] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.175232] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.175341] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.175425] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.175499] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.175572] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.181283] scrncapt: init (heads:4 wins:6 planes:4) [ 1.181422] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.182420] EINJ: ACPI disabled. [ 1.186066] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.186092] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.186109] tegra-pmc: ### PMC reset level: L1 [ 1.186124] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.186178] tegra-pmc: PMC Prod config success [ 1.192054] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.206719] random: fast init done [ 1.209430] printk: console [ttyTCU0] enabled [ 2.750159] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.754633] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.759171] arm-smmu 10000000.iommu: stage 1 translation [ 2.764423] arm-smmu 10000000.iommu: stage 2 translation [ 2.770219] arm-smmu 10000000.iommu: nested translation [ 2.775535] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.782745] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.792974] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.795577] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.802395] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.809894] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.815176] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.819950] arm-smmu 12000000.iommu: stage 1 translation [ 2.825677] arm-smmu 12000000.iommu: stage 2 translation [ 2.830841] arm-smmu 12000000.iommu: nested translation [ 2.836521] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.843751] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.853979] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.856536] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.863389] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.870964] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.880352] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.883573] tegra_profiler: auth: init [ 2.888026] THERMAL EST: found 3 subdevs [ 2.891475] THERMAL EST num_resources: 0 [ 2.895323] [THERMAL EST subdev 0] [ 2.898385] [THERMAL EST subdev 1] [ 2.902055] [THERMAL EST subdev 2] [ 2.905017] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.911551] THERMAL EST: thz register success. [ 2.915742] THERMAL EST: end of probe, return err: 0 [ 2.921424] nvsciipc: loaded module [ 2.928777] tun: Universal TUN/TAP device driver, 1.6 [ 2.930715] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.937067] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.942629] e1000e: Intel(R) PRO/1000 Network Driver [ 2.947554] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.953376] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.958936] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.965147] PPP generic driver version 2.4.2 [ 2.969426] PPP BSD Compression module registered [ 2.973897] PPP Deflate Compression module registered [ 2.979150] PPP MPPE Compression module registered [ 2.983912] usbcore: registered new interface driver r8152 [ 2.989684] usbcore: registered new interface driver asix [ 2.994757] usbcore: registered new interface driver ax88179_178a [ 3.000875] usbcore: registered new interface driver cdc_ether [ 3.007084] usbcore: registered new interface driver net1080 [ 3.012679] usbcore: registered new interface driver cdc_subset [ 3.018488] usbcore: registered new interface driver zaurus [ 3.024171] usbcore: registered new interface driver cdc_ncm [ 3.029839] usbcore: registered new interface driver aqc111 [ 3.035491] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.041802] ohci-pci: OHCI PCI platform driver [ 3.045872] ohci-platform: OHCI generic platform driver [ 3.051763] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.058052] usbcore: registered new interface driver uas [ 3.062159] usbcore: registered new interface driver usb-storage [ 3.068533] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.074532] mousedev: PS/2 mouse device common for all mice [ 3.079300] usbcore: registered new interface driver xpad [ 3.087649] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.090306] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.097818] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.104346] i2c /dev entries driver [ 3.108000] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.113843] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.119037] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.124471] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.129599] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.135080] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.140713] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.154151] device-mapper: uevent: version 1.0.3 [ 3.154583] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.160831] cpuidle: Initializing cpuidle driver [ 3.164905] sdhci: Secure Digital Host Controller Interface driver [ 3.169659] sdhci: Copyright(c) Pierre Ossman [ 3.174002] Synopsys Designware Multimedia Card Interface Driver [ 3.179943] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.186160] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.186915] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.199218] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.221112] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.231026] vdd-1v0: supplied by regulator-dummy [ 3.236580] vdd-1v8-hs: supplied by regulator-dummy [ 3.241482] vdd-1v8-ls: supplied by regulator-dummy [ 3.246444] vdd-1v8-ao: supplied by regulator-dummy [ 3.250584] vddio-ddr-1v1: supplied by regulator-dummy [ 3.255138] vdd-rtc: supplied by regulator-dummy [ 3.256872] spmic-ldo1: supplied by regulator-dummy [ 3.258198] vdd-ao-3v3: supplied by regulator-dummy [ 3.264443] vddio-emmc-3v3: supplied by regulator-dummy [ 3.270754] spmic-ldo4: supplied by regulator-dummy [ 3.272028] vdd-usb-3v3: supplied by regulator-dummy [ 3.278248] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.284514] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.290063] spmic-ldo8: supplied by vdd-1v8-ls [ 3.291482] gpio-510 (gpio_default): hogged as output/high [ 3.292903] gpio-511 (gpio_default): hogged as output/high [ 3.295858] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.432375] max77686-rtc max77620-rtc: registered as rtc0 [ 3.433788] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.434144] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.266765] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.267804] hid: raw HID events driver (C) Jiri Kosina [ 4.268423] usbcore: registered new interface driver usbhid [ 4.268559] usbhid: USB HID core driver [ 4.270164] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.271283] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.265767] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.341533] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.576 ms) ÿá[ 4.356862] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.357491] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.358447] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.359000] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.360556] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.361206] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.361923] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.363039] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.363247] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.364897] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.373206] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.379602] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.384706] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.390860] denver_knobs_init:MTS_VERSION:55637613 [ 4.405349] t19x_cache tegra-cache: probed [ 4.408193] optee: probing for conduit method. [ 4.408967] optee: revision 3.16 (65cc2218) [ 4.409752] optee: dynamic shared memory is enabled [ 4.411761] optee: initialized driver [ 4.418750] nvpmodel: initialized successfully [ 4.419476] tegra_hv: get_hvd: not initialized yet [ 4.424146] user_ivc_mempool: hypervisor not present [ 4.429792] usbcore: registered new interface driver snd-usb-audio [ 4.436374] u32 classifier [ 4.437672] input device check on [ 4.441301] Actions configured [ 4.445188] Initializing XFRM netlink socket [ 4.449866] NET: Registered protocol family 10 [ 4.455777] Segment Routing with IPv6 [ 4.457599] NET: Registered protocol family 17 [ 4.461505] NET: Registered protocol family 15 [ 4.466215] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.480174] Bluetooth: RFCOMM socket layer initialized [ 4.484582] Bluetooth: RFCOMM ver 1.11 [ 4.488344] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.493943] Bluetooth: HIDP socket layer initialized [ 4.500112] 9pnet: Installing 9P2000 support [ 4.503654] Key type dns_resolver registered [ 4.508990] registered taskstats version 1 [ 4.512129] Loading compiled-in X.509 certificates [ 4.524879] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.527922] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.537841] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.539711] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.548578] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.556699] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.673533] tegra194-pcie 14160000.pcie: Link up [ 4.676430] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.676732] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.676978] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.677305] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.677618] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.678056] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.678607] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.691855] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.692578] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.693132] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.694800] pci 0004:01:00.0: supports D1 D2 [ 4.694976] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.706343] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.706652] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.707060] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.707451] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.707836] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.708117] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.708349] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.715842] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.724303] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.734609] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.739167] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.744342] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.751437] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.760648] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.761976] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.770709] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.778895] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.894461] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.894957] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.895227] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.895445] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.895679] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.895864] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.896312] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.896744] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.917663] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.917981] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.919964] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.921350] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.923094] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.924671] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.925927] pci 0005:00:00.0: Removing from iommu group 7 [ 5.926209] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.963468] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.983120] host1x 13e10000.host1x: initialized [ 5.984527] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.985586] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.986611] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.987256] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.988235] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.988793] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.989817] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.990422] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.991427] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.994638] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.004588] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.011333] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.021382] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.028222] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.038438] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.045608] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.055319] falcon 15340000.vic: Adding to iommu group 17 [ 6.070109] falcon 15340000.vic: initialized [ 6.071019] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.075973] falcon 15380000.nvjpg: initialized [ 6.076469] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.087578] falcon 154c0000.nvenc: initialized [ 6.088262] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.098083] falcon 15a80000.nvenc1: initialized [ 6.098768] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.110242] nvdec 15480000.nvdec: initialized [ 6.110758] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.119678] nvdec 15140000.nvdec1: initialized [ 6.120206] tsec 15500000.tsec: Adding to iommu group 18 [ 6.126199] tsec 15500000.tsec: initialized [ 6.126653] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.134985] tsec 15100000.tsecb: initialized [ 6.138339] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.163822] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.174969] gpio-374 (wifi-enable): hogged as output/high [ 6.175331] gpio-431 (camera-control-output-low): hogged as output/low [ 6.175587] gpio-432 (camera-control-output-low): hogged as output/low [ 6.176895] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.178381] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.179775] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.186620] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.191784] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.197929] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.203352] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.211955] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.219140] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.229925] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.235664] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.241689] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.250566] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.259448] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.266856] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.274619] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.280865] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.290568] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.296555] pva 16000000.pva0: Adding to iommu group 22 [ 6.323194] pva 16000000.pva0: initialized [ 6.328377] pva 16800000.pva1: Adding to iommu group 23 [ 6.338406] pva 16800000.pva1: initialized [ 6.343575] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.356620] nvdla 15880000.nvdla0: initialized [ 6.358069] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.366583] nvdla 158c0000.nvdla1: initialized [ 6.368560] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.368862] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.369648] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.369853] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.370076] tegradc 15200000.display: Adding to iommu group 26 [ 6.370314] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.371044] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.374182] tegradccommon 15200000.display-hub: dma mapping done [ 6.379694] tegradc 15210000.display: Adding to iommu group 26 [ 6.380227] tegra_cec 3960000.tegra_cec: probed [ 6.397255] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.402409] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.410081] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.415530] kfuse 3830000.kfuse: initialized [ 6.419687] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.426015] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.432971] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.438984] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.448255] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.453629] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.462833] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.468088] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.488091] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.488443] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.491759] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.499696] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.508349] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.515077] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.522854] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.529662] usb usb1: Product: xHCI Host Controller [ 6.534834] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.541129] usb usb1: SerialNumber: 3610000.xhci [ 6.546811] hub 1-0:1.0: USB hub found [ 6.549750] hub 1-0:1.0: 4 ports detected [ 6.554350] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.558871] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.566667] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.574492] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.582048] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.589542] usb usb2: Product: xHCI Host Controller [ 6.594274] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.600721] usb usb2: SerialNumber: 3610000.xhci [ 6.606154] hub 2-0:1.0: USB hub found [ 6.609266] hub 2-0:1.0: 4 ports detected [ 6.650174] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.655788] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.657102] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.657329] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.671142] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.672140] tegra194-cpufreq ccplex: probed with BWMGR [ 6.673361] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.674053] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.674485] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.675683] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.683732] tegra194-vi5 15c10000.vi: initialized [ 6.683936] mmc0: CQHCI version 5.10 [ 6.685270] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.687767] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.693184] generic_infoframe_type: 0x87 [ 6.699671] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.702946] tegradc 15200000.display: DT parsed successfully [ 6.711434] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.716589] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.723446] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.732630] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.738000] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.738007] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.745458] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.746148] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.749427] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.752877] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.759006] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.759379] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.765527] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.774049] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.782821] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.788972] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.803298] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.809315] nvethernet 2490000.ethernet: Macsec not supported [ 6.810685] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.815184] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.823838] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.829419] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.835987] mmc0: Command Queue Engine enabled [ 6.836070] tegradc 15200000.display: probed [ 6.841854] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.846980] mmc0: periodic cache flush enabled [ 6.855492] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.862920] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.870088] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.876200] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.881195] tegra-se-nvhost 15810000.se: initialized [ 6.883911] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.896159] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.913646] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.915817] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.952909] Console: switching to colour frame buffer device 240x67 [ 6.953333] tegra-se-nvhost 15820000.se: initialized [ 6.958776] tegradc 15200000.display: fb registered [ 6.965584] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.968534] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.975426] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.981438] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.983298] random: crng init done [ 6.987187] tegra-se-nvhost 15830000.se: initialized [ 6.992508] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.997039] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.000874] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.007238] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.012879] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.022039] tegra-se-nvhost 15840000.se: initialized [ 7.027371] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.038998] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.039668] usb 1-2: Manufacturer: Generic [ 7.045628] tegra_actmon d230000.actmon: in actmon_register()... [ 7.052845] hub 1-2:1.0: USB hub found [ 7.054928] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.062138] hub 1-2:1.0: 4 ports detected [ 7.065372] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.068630] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.069772] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.069780] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.070427] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.074801] hvc_sysfs: hypervisor is not present [ 7.082391] Extcon AUX1(HDMI) enable [ 7.082708] tegradc 15210000.display: disp1 connected to head1->sor [ 7.117290] ALSA device list: [ 7.118539] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.121742] No soundcards found. [ 7.128329] tegradc 15210000.display: DT parsed successfully [ 7.131236] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.138348] tegradc 15210000.display: Display dc.000000002471d8a6 registered with id=1 [ 7.163302] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 7.169372] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 7.178979] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.182469] tegradc 15210000.display: probed [ 7.183650] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.195298] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.195302] usb 2-3: Manufacturer: Generic [ 7.204279] tegradc 15210000.display: fb registered [ 7.206390] hub 2-3:1.0: USB hub found [ 7.212352] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.214804] Freeing unused kernel memory: 3968K [ 7.214930] hub 2-3:1.0: 4 ports detected [ 7.220478] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.220489] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.242463] tegradc 15200000.display: blank - powerdown [ 7.253522] Run /init as init process [ 7.285631] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.285638] Extcon AUX1(HDMI) disable [ 7.301466] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.309072] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.309989] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.323412] tegradc 15200000.display: unblank [ 7.324661] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.324851] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.330780] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.332644] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.336654] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.336658] Extcon AUX1(HDMI) enable [ 7.349451] tegradc 15200000.display: sync windows ret = 246 [ 7.379868] tegradc 15210000.display: blank - powerdown [ 7.381449] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.381453] Extcon DP: HPD disabled [ 7.381457] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.381468] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.381473] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.389248] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.393598] Extcon HDMI: HPD enabled [ 7.396995] tegradc 15200000.display: hdmi: plugged [ 7.425577] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.439933] Root device found: mmcblk0p1 [ 7.443475] Found dev node: /dev/mmcblk0p1 [ 7.458544] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.460082] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.461582] usb 1-3: Product: Bluetooth Radio [ 7.462955] usb 1-3: Manufacturer: Realtek [ 7.464307] usb 1-3: SerialNumber: 00e04c000001 [ 7.479753] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.485089] Rootfs mounted over mmcblk0p1 [ 7.490119] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.491638] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.523031] Switching from initrd to actual rootfs [ 7.684025] systemd[1]: System time before build time, advancing clock. [ 7.754220] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.759390] systemd[1]: Detected architecture arm64. [ 7.808642] systemd[1]: Set hostname to . [ 7.972937] systemd-sysv-generator[243]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.319351] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.321110] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.326640] systemd[1]: Created slice system-modprobe.slice. [ 8.331454] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.335766] systemd[1]: Created slice User and Session Slice. [ 8.339380] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.343649] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.347267] systemd[1]: Reached target User and Group Name Lookups. [ 8.350628] systemd[1]: Reached target Slices. [ 8.353880] systemd[1]: Reached target Swap. [ 8.357943] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.361807] systemd[1]: Listening on Syslog Socket. [ 8.365485] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.369093] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.373440] systemd[1]: Listening on Journal Audit Socket. [ 8.377155] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.381107] systemd[1]: Listening on Journal Socket. [ 8.384952] systemd[1]: Listening on udev Control Socket. [ 8.390076] systemd[1]: Listening on udev Kernel Socket. [ 8.401130] systemd[1]: Mounting Huge Pages File System... [ 8.409771] systemd[1]: Mounting POSIX Message Queue File System... [ 8.418232] systemd[1]: Mounting RPC Pipe File System... [ 8.427063] systemd[1]: Mounting Kernel Debug File System... [ 8.435737] systemd[1]: Mounting Kernel Trace File System... [ 8.445866] systemd[1]: Starting Journal Service... [ 8.454857] systemd[1]: Starting Set the console keyboard layout... [ 8.463113] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.466747] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.473032] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.480877] systemd[1]: Started Nameserver information manager. [ 8.485755] systemd[1]: Reached target Network (Pre). [ 8.492699] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.494719] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.501010] systemd[1]: Starting Load Kernel Modules... [ 8.508716] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.517663] systemd[1]: Starting udev Coldplug all Devices... [ 8.527544] systemd[1]: Mounted Huge Pages File System. [ 8.531508] systemd[1]: Mounted POSIX Message Queue File System. [ 8.535207] systemd[1]: Mounted RPC Pipe File System. [ 8.537092] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.540325] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.543181] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.544805] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.545671] systemd[1]: Mounted Kernel Debug File System. [ 8.546360] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.549149] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.549431] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.551005] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.553901] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.553917] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.562228] systemd[1]: Mounted Kernel Trace File System. [ 8.568674] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.574477] systemd[1]: nvfb-udev.service: Succeeded. [ 8.578586] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.590578] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.602453] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.604272] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.611920] systemd[1]: Starting Load/Save Random Seed... [ 8.620546] systemd[1]: Starting Create System Users... [ 8.647431] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.647431] [ 8.677640] systemd[1]: Finished Load/Save Random Seed. [ 8.684278] systemd[1]: Finished Load Kernel Modules. [ 8.689540] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.696369] systemd[1]: Mounting Kernel Configuration File System... [ 8.704509] systemd[1]: Started OP-TEE Client Supplicant. [ 8.713280] systemd[1]: Starting Apply Kernel Variables... [ 8.723473] systemd[1]: Finished Set the console keyboard layout. [ 8.728730] systemd[1]: Mounted Kernel Configuration File System. [ 10.122294] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.128850] imx219 9-0010: board setup failed [ 10.130254] imx219: probe of 9-0010 failed with error -121 [ 10.147589] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.154148] imx219 10-0010: board setup failed [ 10.155489] imx219: probe of 10-0010 failed with error -121 [ 10.229464] hot-surface-alert cooling state: 0 -> 1 [ 10.720595] using random self ethernet address [ 10.721890] using random host ethernet address [ 11.565125] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.565131] Creating 1 MTD partitions on "spi6.0": [ 11.565142] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.193600] using random self ethernet address [ 12.195935] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.791520] nvidia: loading out-of-tree module taints kernel. [ 59.043065] watchdog: watchdog0: watchdog did not stop! [ 59.578175] Trying to unregister non-registered hwtime source [ 62.640330] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.642480] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy :ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.311] I> sdmmc DDR50 mode [0001.328] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.346] W> Cannot find any partition table for 00000003 [0001.347] > PARTITION_MANAGER: Failed to publish partition. [0001.362] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.364] I> Active Boot chain : 0 [0002.035] I> Relocating BR-BCT [0002.036] > DEVICE_PROD: device prod is not initialized. [0002.341] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.342] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.343] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.343] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.344] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.344] I> dram_block larger than 80000000 [0002.347] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.358] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.361] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.591] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized pm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.210] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.211] I> CPU-BL Params @ 0xca020000 [0003.211] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.212] I> 2) Base:0xc9800000 Size:0x00200000 [0003.212] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.219] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.228] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.237] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.246] I> 11) Base:0x40000000 Size:0x00040000 [0003.250] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.255] I> 13) Base:0x40046000 Size:0x00002000 [0003.259] I> 14) Base:0x40048000 Size:0x00002000 [0003.263] I> 15) Base:0xaf000000 Size:0x00004000 [0003.268] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.277] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.286] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.295] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.304] I> 24) Base:0xcc000000 Size:0x02000000 [0003.308] I> 25) Base:0x40050000 Size:0x00002000 [0003.313] I> 26) Base:0x40040000 Size:0x00006000 [0003.317] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.321] I> 28) Base:0xc8400000 Size:0x00200000 [0003.326] I> 29) Base:0xc8800000 Size:0x00400000 [0003.330] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.335] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.344] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.353] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.362] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.371] I> 39) Base:0xb0000000 Size:0x08000000 [0003.375] I> 40) Base:0x00000000 Size:0x00000000 [0003.379] I> 41) Base:0x00000000 Size:0x00000000 [0003.384] I> 42) Base:0x00000000 Size:0x00000000 [0003.388] I> 43) Base:0x00000000 Size:0x00000000 [0003.393] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.402] GIC-SPI Target CPU: 0 [0003.405] Interrupts Init done [0003.408] calling constructors [0003.411] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.417] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.427] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.435] initializing platform [0003.438] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.447] I> Bl_dtb @0xadf00000 [0003.450] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.491] I> register 'maxim' power off handle [0003.494] I> virtual i2c enabled [0003.494] I> registered 'maxim,max20024' pmic [0003.494] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.495] I> Boot-device: QSPI [0003.495] I> Boot_device: QSPI_FLASH instance: 0 [0003.499] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.517] I> QSPI source rate = 204000 Khz [0003.520] I> Requested rate for QSPI clock = 34000 Khz [0003.525] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.530] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.544] I> Qspi initialized successfully [0003.544] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.557] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.566] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.575] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> regulator 'vdd-hdmi-5v0' already enabled [0003.606] I> hdmi cable connected [0003.612] W> set volts not configured for 'vdd-1v0' [0003.619] W> set volts not configured for 'vdd-1v8-hs' [0003.620] I> retrieved tmds range from prod_list_hdmi_soc [0003.627] E> invalid display type [0003.628] E> cannot find any other nvdisp nodes [0003.644] I> edid read success [0003.656] I> edid read success [0003.657] I> width = 640, height = 480, frequency = 25174825 [0003.657] I> width = 1920, height = 1080, frequency = 148500000 [0003.658] I> width = 1280, height = 768, frequency = 79500000 [0003.658] I> width = 1360, height = 768, frequency = 85500000 [0003.658] I> width = 720, height = 480, frequency = 26973026 [0003.662] I> width = 720, height = 576, frequency = 26973026 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1280, height = 720, frequency = 74175824 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 1920, height = 1080, frequency = 148351648 [0003.691] I> width = 720, height = 480, frequency = 26973026 [0003.696] I> width = 720, height = 576, frequency = 26973026 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 3840, height = 2160, frequency = 296703296 [0003.725] I> width = 4096, height = 2160, frequency = 296703296 [0003.731] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.742] I> hdmi_enable, starting HDMI initialisation [0003.747] I> hdmi_enable, HDMI initialisation complete [0003.756] initializing target [0003.757] calling apps_init() [0003.758] starting app kernel_boot_app [0003.759] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000725] Console: colour dummy device 80x25 [ 0.002033] printk: console [tty0] enabled [ 0.002109] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002145] pid_max: default: 32768 minimum: 301 [ 0.002330] LSM: Security Framework initializing [ 0.002388] Yama: becoming mindful. [ 0.002435] SELinux: Initializing. [ 0.002586] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002624] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005643] rcu: Hierarchical SRCU implementation. [ 0.005888] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006817] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006865] DTB Build time: Aug 10 2022 20:31:49 [ 0.009962] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010237] Remapping and enabling EFI services. [ 0.012238] smp: Bringing up secondary CPUs ... [ 0.042669] Detected PIPT I-cache on CPU1 [ 0.042776] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072239] Detected PIPT I-cache on CPU2 [ 0.072385] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101940] Detected PIPT I-cache on CPU3 [ 0.102089] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131784] Detected PIPT I-cache on CPU4 [ 0.131938] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161700] Detected PIPT I-cache on CPU5 [ 0.161801] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162084] smp: Brought up 1 node, 6 CPUs [ 0.162266] SMP: Total of 6 processors activated. [ 0.162320] CPU features: detected: Privileged Access Never [ 0.162347] CPU features: detected: LSE atomic instructions [ 0.162366] CPU features: detected: User Access Override [ 0.162395] CPU features: detected: 32-bit EL0 Support [ 0.162412] CPU features: detected: RAS Extension Support [ 0.162446] CPU features: detected: CRC32 instructions [ 0.162470] CPU features: detected: 32-bit EL1 Support [ 0.234168] CPU: All CPU(s) started at EL2 [ 0.239636] devtmpfs: initialized [ 0.286654] Registered cp15_barrier emulation handler [ 0.286743] Registered setend emulation handler [ 0.286763] KASLR enabled [ 0.287011] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287034] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288351] pinctrl core: initialized pinctrl subsystem [ 0.289404] SMBIOS 3.0.0 present. [ 0.289432] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.290075] NET: Registered protocol family 16 [ 0.291875] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292372] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293071] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.293132] audit: initializing netlink subsys (disabled) [ 0.293431] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.293885] thermal_sys: Registered thermal governor 'step_wise' [ 0.293892] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293907] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.296117] cpuidle: using governor menu [ 0.296472] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296855] ASID allocator initialised with 32768 entries [ 0.297070] Serial: AMBA PL011 UART driver [ 0.301566] Tegra reboot handler registered. [ 0.370184] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.370316] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.370534] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.370575] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.370707] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.370746] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.370854] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.370891] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.371004] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.371040] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.373308] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.373342] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.373370] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.373397] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.373427] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.373453] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.373492] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.373524] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.373558] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.373600] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.373625] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.373651] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.373675] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.373698] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.373721] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.373744] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.373768] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.373862] mc-err: mcerr ops are set to t19x [ 0.385935] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.385956] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.385968] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.385979] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.393215] ACPI: Interpreter disabled. [ 0.394303] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.395496] iommu: Default domain type: Translated [ 0.395563] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.395942] SCSI subsystem initialized [ 0.396091] usbcore: registered new interface driver usbfs [ 0.396136] usbcore: registered new interface driver hub [ 0.396172] usbcore: registered new device driver usb [ 0.396534] mc: Linux media interface: v0.10 [ 0.396561] videodev: Linux video capture interface: v2.00 [ 0.396875] pps_core: LinuxPPS API ver. 1 registered [ 0.396887] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.396906] PTP clock support registered [ 0.397107] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.397400] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.397484] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.398074] Registered efivars operations [ 0.403601] FPGA manager framework [ 0.403698] Advanced Linux Sound Architecture Driver Initialized. [ 0.404240] Bluetooth: Core ver 2.22 [ 0.404284] NET: Registered protocol family 31 [ 0.404295] Bluetooth: HCI device and connection manager initialized [ 0.404309] Bluetooth: HCI socket layer initialized [ 0.404324] Bluetooth: L2CAP socket layer initialized [ 0.404344] Bluetooth: SCO socket layer initialized [ 0.406002] camchar: rtcpu character device driver loaded [ 0.406744] clocksource: Switched to clocksource arch_sys_counter [ 0.701717] VFS: Disk quotas dquot_6.6.0 [ 0.701788] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.702155] pnp: PnP ACPI: disabled [ 0.713911] la/ptsa driver initialized. [ 0.714029] NET: Registered protocol family 2 [ 0.714212] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.718823] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.718912] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.719208] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.719640] TCP: Hash tables configured (established 65536 bind 65536) [ 0.719857] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.719975] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.720165] NET: Registered protocol family 1 [ 0.720901] RPC: Registered named UNIX socket transport module. [ 0.720915] RPC: Registered udp transport module. [ 0.720925] RPC: Registered tcp transport module. [ 0.720934] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.720949] PCI: CLS 0 bytes, default 64 [ 0.721122] Trying to unpack rootfs image as initramfs... [ 0.904848] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.907090] Freeing initrd memory: 8196K [ 0.911244] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.911280] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.911319] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.911786] kvm [1]: IPA Size Limit: 40 bits [ 0.912544] kvm [1]: vgic interrupt IRQ9 [ 0.913299] kvm [1]: VHE mode initialized successfully [ 0.915125] Initialise system trusted keyrings [ 0.915484] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.923232] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.924257] NFS: Registering the id_resolver key type [ 0.924297] Key type id_resolver registered [ 0.924312] Key type id_legacy registered [ 0.924454] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.924479] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.924515] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.935754] NET: Registered protocol family 38 [ 0.935779] Key type asymmetric registered [ 0.935794] Asymmetric key parser 'x509' registered [ 0.935841] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.936098] io scheduler mq-deadline registered [ 0.936118] io scheduler kyber registered [ 0.943160] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.946512] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.946591] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.946707] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.946818] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.946920] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.952671] scrncapt: init (heads:4 wins:6 planes:4) [ 0.953079] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.953885] EINJ: ACPI disabled. [ 0.957137] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.957167] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.957182] tegra-pmc: ### PMC reset level: L1 [ 0.957197] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.957252] tegra-pmc: PMC Prod config success [ 0.962567] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.980906] random: fast init done [ 0.990857] printk: console [ttyTCU0] enabled [ 2.520175] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.524364] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.528936] arm-smmu 10000000.iommu: stage 1 translation [ 2.534761] arm-smmu 10000000.iommu: stage 2 translation [ 2.539916] arm-smmu 10000000.iommu: nested translation [ 2.545506] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.552680] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.563921] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.565782] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.572113] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.580065] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.585147] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.589870] arm-smmu 12000000.iommu: stage 1 translation [ 2.595637] arm-smmu 12000000.iommu: stage 2 translation [ 2.600804] arm-smmu 12000000.iommu: nested translation [ 2.606489] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.613673] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.624701] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.626792] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.633094] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.640769] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.650148] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.653505] tegra_profiler: auth: init [ 2.657998] THERMAL EST: found 3 subdevs [ 2.661192] THERMAL EST num_resources: 0 [ 2.665315] [THERMAL EST subdev 0] [ 2.668358] [THERMAL EST subdev 1] [ 2.672026] [THERMAL EST subdev 2] [ 2.675015] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.681456] THERMAL EST: thz register success. [ 2.685719] THERMAL EST: end of probe, return err: 0 [ 2.691241] nvsciipc: loaded module [ 2.698411] tun: Universal TUN/TAP device driver, 1.6 [ 2.700635] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.707039] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.712337] e1000e: Intel(R) PRO/1000 Network Driver [ 2.717525] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.723346] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.728900] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.735080] PPP generic driver version 2.4.2 [ 2.739303] PPP BSD Compression module registered [ 2.743625] PPP Deflate Compression module registered [ 2.748868] PPP MPPE Compression module registered [ 2.754137] usbcore: registered new interface driver r8152 [ 2.759386] usbcore: registered new interface driver asix [ 2.764991] usbcore: registered new interface driver ax88179_178a [ 2.771112] usbcore: registered new interface driver cdc_ether [ 2.776794] usbcore: registered new interface driver net1080 [ 2.782393] usbcore: registered new interface driver cdc_subset [ 2.788690] usbcore: registered new interface driver zaurus [ 2.794389] usbcore: registered new interface driver cdc_ncm [ 2.800065] usbcore: registered new interface driver aqc111 [ 2.805724] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.811533] ohci-pci: OHCI PCI platform driver [ 2.816084] ohci-platform: OHCI generic platform driver [ 2.821950] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.827970] usbcore: registered new interface driver uas [ 2.832124] usbcore: registered new interface driver usb-storage [ 2.838520] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.844223] mousedev: PS/2 mouse device common for all mice [ 2.849297] usbcore: registered new interface driver xpad [ 2.857463] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.860281] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.868072] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.874618] i2c /dev entries driver [ 2.877755] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.883741] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.888801] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.894196] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.899601] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.905077] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.910830] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.924045] device-mapper: uevent: version 1.0.3 [ 2.924487] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.930932] cpuidle: Initializing cpuidle driver [ 2.935051] sdhci: Secure Digital Host Controller Interface driver [ 2.939619] sdhci: Copyright(c) Pierre Ossman [ 2.943973] Synopsys Designware Multimedia Card Interface Driver [ 2.949921] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.955912] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.956716] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.969386] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.991246] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.001030] vdd-1v0: supplied by regulator-dummy [ 3.006571] vdd-1v8-hs: supplied by regulator-dummy [ 3.011439] vdd-1v8-ls: supplied by regulator-dummy [ 3.016331] vdd-1v8-ao: supplied by regulator-dummy [ 3.020250] vddio-ddr-1v1: supplied by regulator-dummy [ 3.024796] vdd-rtc: supplied by regulator-dummy [ 3.026555] spmic-ldo1: supplied by regulator-dummy [ 3.027843] vdd-ao-3v3: supplied by regulator-dummy [ 3.034020] vddio-emmc-3v3: supplied by regulator-dummy [ 3.040353] spmic-ldo4: supplied by regulator-dummy [ 3.041651] vdd-usb-3v3: supplied by regulator-dummy [ 3.047914] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.054199] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.059848] spmic-ldo8: supplied by vdd-1v8-ls [ 3.061417] gpio-510 (gpio_default): hogged as output/high [ 3.062806] gpio-511 (gpio_default): hogged as output/high [ 3.065730] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.201703] max77686-rtc max77620-rtc: registered as rtc0 [ 3.202790] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.203166] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.051603] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.052926] hid: raw HID events driver (C) Jiri Kosina [ 4.053845] usbcore: registered new interface driver usbhid [ 4.054036] usbhid: USB HID core driver [ 4.056522] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.057759] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.157631] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.231537] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 74.716 ms) ÿá[ 4.141577] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.142150] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.143652] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.144931] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.147127] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.147801] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.148462] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.149950] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.150145] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.152729] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.158353] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.164258] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.169467] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.175880] denver_knobs_init:MTS_VERSION:55637613 [ 4.189081] t19x_cache tegra-cache: probed [ 4.194902] optee: probing for conduit method. [ 4.195799] optee: revision 3.16 (65cc2218) [ 4.196937] optee: dynamic shared memory is enabled [ 4.198242] optee: initialized driver [ 4.203402] nvpmodel: initialized successfully [ 4.203927] tegra_hv: get_hvd: not initialized yet [ 4.208668] user_ivc_mempool: hypervisor not present [ 4.214804] usbcore: registered new interface driver snd-usb-audio [ 4.221459] u32 classifier [ 4.222397] input device check on [ 4.226119] Actions configured [ 4.230086] Initializing XFRM netlink socket [ 4.234952] NET: Registered protocol family 10 [ 4.241251] Segment Routing with IPv6 [ 4.242259] NET: Registered protocol family 17 [ 4.246283] NET: Registered protocol family 15 [ 4.251002] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.265069] Bluetooth: RFCOMM socket layer initialized [ 4.269095] Bluetooth: RFCOMM ver 1.11 [ 4.272911] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.279003] Bluetooth: HIDP socket layer initialized [ 4.285014] 9pnet: Installing 9P2000 support [ 4.288425] Key type dns_resolver registered [ 4.294109] registered taskstats version 1 [ 4.296914] Loading compiled-in X.509 certificates [ 4.309176] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.312729] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.322557] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.324792] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.333071] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.341700] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.458865] tegra194-pcie 14160000.pcie: Link up [ 4.461875] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.462133] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.462345] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.462555] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.462809] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.463337] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.463881] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.477616] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.478167] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.478593] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.480231] pci 0004:01:00.0: supports D1 D2 [ 4.480450] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.493468] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.493837] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.494130] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.494571] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.495071] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.495370] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.495563] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.500886] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.509676] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.520240] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.524614] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.530328] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.537100] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.546082] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.547292] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.556048] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.564472] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.679603] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.680079] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.680364] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.680500] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.680838] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.681047] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.681491] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.681893] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.703756] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.704141] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.705920] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.707405] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.708651] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.710228] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.711354] pci 0005:00:00.0: Removing from iommu group 7 [ 5.711634] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.747860] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.772075] host1x 13e10000.host1x: initialized [ 5.774052] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.775106] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.776480] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.777200] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.778399] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.779115] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.780329] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.781038] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.782125] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.782840] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.789959] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.796952] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.806843] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.813614] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.823344] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.830361] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.840668] falcon 15340000.vic: Adding to iommu group 17 [ 5.855171] falcon 15340000.vic: initialized [ 5.856224] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.861506] falcon 15380000.nvjpg: initialized [ 5.862113] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.873019] falcon 154c0000.nvenc: initialized [ 5.873519] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.883636] falcon 15a80000.nvenc1: initialized [ 5.884273] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.896618] nvdec 15480000.nvdec: initialized [ 5.897420] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.908206] nvdec 15140000.nvdec1: initialized [ 5.908835] tsec 15500000.tsec: Adding to iommu group 18 [ 5.914745] tsec 15500000.tsec: initialized [ 5.915569] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.921154] tsec 15100000.tsecb: initialized [ 5.925194] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.952362] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.964930] gpio-374 (wifi-enable): hogged as output/high [ 5.965216] gpio-431 (camera-control-output-low): hogged as output/low [ 5.965477] gpio-432 (camera-control-output-low): hogged as output/low [ 5.967147] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.969186] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.969826] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.971916] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.977094] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.982917] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.988633] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.997178] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.004335] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.016054] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.021102] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.026569] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.035465] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.044934] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.052357] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.059642] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.066041] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.075420] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.081884] pva 16000000.pva0: Adding to iommu group 22 [ 6.110816] pva 16000000.pva0: initialized [ 6.115514] pva 16800000.pva1: Adding to iommu group 23 [ 6.126782] pva 16800000.pva1: initialized [ 6.131411] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.144476] nvdla 15880000.nvdla0: initialized [ 6.145982] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.163613] nvdla 158c0000.nvdla1: initialized [ 6.168783] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.169196] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.169559] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.169586] tegradc 15210000.display: Adding to iommu group 26 [ 6.170220] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.170605] tegradccommon 15200000.display-hub: dma mapping done [ 6.170924] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.171456] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.172122] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.176543] tegradc 15200000.display: Adding to iommu group 26 [ 6.176683] tegradc 15210000.display: disp0 connected to head1->sor [ 6.176792] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.176843] tegra_cec 3960000.tegra_cec: probed [ 6.177893] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.185110] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.189073] tegradc 15210000.display: DT parsed successfully [ 6.197172] kfuse 3830000.kfuse: initialized [ 6.201176] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.202058] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.207545] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.214170] generic_infoframe_type: 0x87 [ 6.219024] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.219884] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.223806] tegradc 15200000.display: DT parsed successfully [ 6.244655] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.248713] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.256364] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.264739] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.283643] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.289223] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.289246] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.298733] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.307199] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.328484] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.334620] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.352964] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.362775] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.364333] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.370046] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.370127] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.377267] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.379884] random: crng init done [ 6.383543] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.410026] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.416592] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.423877] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.431121] usb usb1: Product: xHCI Host Controller [ 6.436134] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.442479] usb usb1: SerialNumber: 3610000.xhci [ 6.448235] hub 1-0:1.0: USB hub found [ 6.451102] hub 1-0:1.0: 4 ports detected [ 6.455889] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.460767] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.467892] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.475700] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.483551] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.490961] usb usb2: Product: xHCI Host Controller [ 6.495680] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.501892] usb usb2: SerialNumber: 3610000.xhci [ 6.507783] hub 2-0:1.0: USB hub found [ 6.510351] hub 2-0:1.0: 4 ports detected [ 6.552921] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.559007] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.560574] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.560846] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.574160] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.575299] tegra194-cpufreq ccplex: probed with BWMGR [ 6.576570] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.577082] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.577580] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.578893] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.586578] tegra194-vi5 15c10000.vi: initialized [ 6.587904] tegradc 15210000.display: disp0 connected to head1->sor [ 6.590659] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.592263] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.597993] tegradc 15210000.display: DT parsed successfully [ 6.604465] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.609916] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.617844] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.625417] mmc0: CQHCI version 5.10 [ 6.625455] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.625501] generic_infoframe_type: 0x87 [ 6.625531] tegradc 15200000.display: DT parsed successfully [ 6.625561] tegradc 15200000.display: Display dc.000000004d7a9682 registered with id=0 [ 6.626283] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.626288] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.626291] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.626633] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.626639] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.626848] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.627915] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.627919] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.630028] tegradc 15200000.display: probed [ 6.632109] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.665050] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.668062] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.722735] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.726926] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.734759] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.762911] mmc0: Command Queue Engine enabled [ 6.767446] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.767460] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.772157] mmc0: periodic cache flush enabled [ 6.772182] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.780255] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.786527] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.796688] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.816380] nvethernet 2490000.ethernet: Macsec not supported [ 6.816814] Console: switching to colour frame buffer device 240x67 [ 6.828057] tegradc 15200000.display: fb registered [ 6.833409] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.839155] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.839748] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.848174] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.852748] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.858388] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.864859] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.871489] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.887551] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.894275] tegra-se-nvhost 15810000.se: initialized [ 6.899194] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.904076] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.910536] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.911025] tegra-se-nvhost 15820000.se: initialized [ 6.918158] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.925373] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.926959] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.928039] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.928048] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.928660] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.928663] Extcon AUX1(HDMI) enable [ 6.928852] tegradc 15210000.display: disp1 connected to head1->sor [ 6.929034] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.929096] tegradc 15210000.display: DT parsed successfully [ 6.929133] tegradc 15210000.display: Display dc.0000000095c9d586 registered with id=1 [ 6.929239] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.929245] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.930728] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.936139] tegradc 15210000.display: probed [ 6.937167] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.945854] usb 1-2: Manufacturer: Generic [ 6.954369] tegra-se-nvhost 15830000.se: initialized [ 6.963111] hub 1-2:1.0: USB hub found [ 6.969621] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.973394] hub 1-2:1.0: 4 ports detected [ 6.978828] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.027589] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.046245] tegra-se-nvhost 15840000.se: initialized [ 7.068990] tegradc 15210000.display: fb registered [ 7.070741] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.077232] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.081426] tegra_actmon d230000.actmon: in actmon_register()... [ 7.087073] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.087084] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.088248] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.100781] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.106080] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.119898] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.126593] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.135542] hvc_sysfs: hypervisor is not present [ 7.139586] usb 2-3: Manufacturer: Generic ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.148525] tegradc 15200000.display: blank - powerdown [ 7.173884] ALSA device list: [ 7.173890] No soundcards found. [ 7.180795] hub 2-3:1.0: USB hub found [ 7.182644] hub 2-3:1.0: 4 ports detected [ 7.194067] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.194072] Extcon AUX1(HDMI) disable [ 7.202755] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.202760] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.206729] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.217270] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.218080] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.230300] tegradc 15200000.display: unblank [ 7.231348] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.231544] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.237221] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.239126] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.243078] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.243082] Extcon AUX1(HDMI) enable [ 7.255873] tegradc 15200000.display: sync windows ret = 247 [ 7.289198] tegradc 15210000.display: blank - powerdown [ 7.290729] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.290733] Extcon DP: HPD disabled [ 7.290737] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.290749] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.290753] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.314222] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.315219] Freeing unused kernel memory: 3968K [ 7.321230] Extcon HDMI: HPD enabled [ 7.325977] Run /init as init process [ 7.329719] tegradc 15200000.display: hdmi: plugged [ 7.355979] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.357343] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.358653] usb 1-3: Product: Bluetooth Radio [ 7.359861] usb 1-3: Manufacturer: Realtek [ 7.361990] usb 1-3: SerialNumber: 00e04c000001 [ 7.394947] Root device found: mmcblk0p1 [ 7.398276] Found dev node: /dev/mmcblk0p1 [ 7.434176] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.439485] Rootfs mounted over mmcblk0p1 [ 7.468892] Switching from initrd to actual rootfs [ 7.611569] systemd[1]: System time before build time, advancing clock. [ 7.684980] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.689679] systemd[1]: Detected architecture arm64. [ 7.740477] systemd[1]: Set hostname to . [ 7.908623] systemd-sysv-generator[252]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.258028] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.259704] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.265161] systemd[1]: Created slice system-modprobe.slice. [ 8.269708] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.273789] systemd[1]: Created slice User and Session Slice. [ 8.277045] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.280958] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.284188] systemd[1]: Reached target User and Group Name Lookups. [ 8.287288] systemd[1]: Reached target Slices. [ 8.290228] systemd[1]: Reached target Swap. [ 8.294557] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.300902] systemd[1]: Listening on Syslog Socket. [ 8.306854] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.312654] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.318153] systemd[1]: Listening on Journal Audit Socket. [ 8.321761] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.325492] systemd[1]: Listening on Journal Socket. [ 8.330833] systemd[1]: Listening on udev Control Socket. [ 8.336010] systemd[1]: Listening on udev Kernel Socket. [ 8.346963] systemd[1]: Mounting Huge Pages File System... [ 8.355380] systemd[1]: Mounting POSIX Message Queue File System... [ 8.363215] systemd[1]: Mounting RPC Pipe File System... [ 8.371536] systemd[1]: Mounting Kernel Debug File System... [ 8.379788] systemd[1]: Mounting Kernel Trace File System... [ 8.389322] systemd[1]: Starting Journal Service... [ 8.398603] systemd[1]: Starting Set the console keyboard layout... [ 8.408082] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.411474] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.418468] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.427049] systemd[1]: Started Nameserver information manager. [ 8.431153] systemd[1]: Reached target Network (Pre). [ 8.437878] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.439747] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.447313] systemd[1]: Starting Load Kernel Modules... [ 8.455145] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.462618] systemd[1]: Starting udev Coldplug all Devices... [ 8.473742] systemd[1]: Mounted Huge Pages File System. [ 8.477416] systemd[1]: Mounted POSIX Message Queue File System. [ 8.481145] systemd[1]: Mounted RPC Pipe File System. [ 8.484654] systemd[1]: Mounted Kernel Debug File System. [ 8.487968] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.488189] systemd[1]: Mounted Kernel Trace File System. [ 8.488747] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.491013] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.493649] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.493663] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.493668] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.493926] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.498837] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.500757] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.500768] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.514833] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.519773] systemd[1]: nvfb-udev.service: Succeeded. [ 8.523632] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.535047] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.546571] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.548433] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.554126] systemd[1]: Starting Load/Save Random Seed... [ 8.562281] systemd[1]: Starting Create System Users... [ 8.607978] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.607978] [ 8.613226] systemd[1]: Finished Load/Save Random Seed. [ 8.630624] systemd[1]: Finished Create System Users. [ 8.638613] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.645177] systemd[1]: Finished Load Kernel Modules. [ 8.649356] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.656564] systemd[1]: Mounting Kernel Configuration File System... [ 8.664540] systemd[1]: Started OP-TEE Client Supplicant. [ 8.672896] systemd[1]: Starting Apply Kernel Variables... [ 8.683295] systemd[1]: Finished Set the console keyboard layout. [ 8.687317] systemd[1]: Mounted Kernel Configuration File System. [ 8.696153] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.702941] systemd[1]: Reached target Local File Systems (Pre). [ 8.706031] systemd[1]: Reached target Local File Systems. [ 8.709303] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 8.715862] systemd[1]: Starting Enable support for additional executable binary formats... [ 10.139624] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.150621] imx219 9-0010: board setup failed [ 10.154375] imx219: probe of 9-0010 failed with error -121 [ 10.176397] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.184945] imx219 10-0010: board setup failed [ 10.186659] imx219: probe of 10-0010 failed with error -121 [ 10.231403] hot-surface-alert cooling state: 0 -> 1 [ 11.167544] using random self ethernet address [ 11.173843] using random host ethernet address [ 11.520284] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.520291] Creating 1 MTD partitions on "spi6.0": [ 11.520302] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.362319] using random self ethernet address [ 12.364121] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.835266] nvidia: loading out-of-tree module taints kernel. [ 59.248358] watchdog: watchdog0: watchdog did not stop! [ 59.743680] Trying to unregister non-registered hwtime source [ 62.802301] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.804047] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.905] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.323] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized cvc initialized ÿä:20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh6ÿâcvc_late initialized regulator_post initialized ÿä4 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuration mÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäight be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.612] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.650] I> edid read success [0003.651] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.652] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.736] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.750] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000691] Console: colour dummy device 80x25 [ 0.002467] printk: console [tty0] enabled [ 0.002532] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002583] pid_max: default: 32768 minimum: 301 [ 0.002804] LSM: Security Framework initializing [ 0.002862] Yama: becoming mindful. [ 0.002904] SELinux: Initializing. [ 0.003097] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003134] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006237] rcu: Hierarchical SRCU implementation. [ 0.006566] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007461] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007549] DTB Build time: Aug 10 2022 20:31:49 [ 0.010889] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011157] Remapping and enabling EFI services. [ 0.013164] smp: Bringing up secondary CPUs ... [ 0.042239] Detected PIPT I-cache on CPU1 [ 0.042330] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073206] Detected PIPT I-cache on CPU2 [ 0.073306] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102906] Detected PIPT I-cache on CPU3 [ 0.102998] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132691] Detected PIPT I-cache on CPU4 [ 0.132767] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162402] Detected PIPT I-cache on CPU5 [ 0.162474] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162797] smp: Brought up 1 node, 6 CPUs [ 0.163180] SMP: Total of 6 processors activated. [ 0.163239] CPU features: detected: Privileged Access Never [ 0.163271] CPU features: detected: LSE atomic instructions [ 0.163293] CPU features: detected: User Access Override [ 0.163314] CPU features: detected: 32-bit EL0 Support [ 0.163335] CPU features: detected: RAS Extension Support [ 0.163356] CPU features: detected: CRC32 instructions [ 0.163376] CPU features: detected: 32-bit EL1 Support [ 0.229983] CPU: All CPU(s) started at EL2 [ 0.236315] devtmpfs: initialized [ 0.286572] Registered cp15_barrier emulation handler [ 0.286675] Registered setend emulation handler [ 0.286697] KASLR enabled [ 0.286944] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286974] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288304] pinctrl core: initialized pinctrl subsystem [ 0.289376] SMBIOS 3.0.0 present. [ 0.289410] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.290076] NET: Registered protocol family 16 [ 0.292189] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292702] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293442] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.293505] audit: initializing netlink subsys (disabled) [ 0.293817] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.294209] thermal_sys: Registered thermal governor 'step_wise' [ 0.294216] thermal_sys: Registered thermal governor 'power_allocator' [ 0.294233] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.296194] cpuidle: using governor menu [ 0.296553] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297019] ASID allocator initialised with 32768 entries [ 0.297256] Serial: AMBA PL011 UART driver [ 0.300472] Tegra reboot handler registered. [ 0.363526] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.363639] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.363830] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.363875] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.364005] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.364048] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.364197] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.364259] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.364406] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.364447] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.367056] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.367117] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.367146] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.367173] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.367203] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.367232] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.367269] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.367303] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.367330] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.367355] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.367380] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.367404] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.367428] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.367452] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.367476] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.367500] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.367526] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.367640] mc-err: mcerr ops are set to t19x [ 0.378812] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.378867] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.378884] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.378897] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.385606] ACPI: Interpreter disabled. [ 0.386684] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.387999] iommu: Default domain type: Translated [ 0.388079] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.388435] SCSI subsystem initialized [ 0.388586] usbcore: registered new interface driver usbfs [ 0.388623] usbcore: registered new interface driver hub [ 0.388673] usbcore: registered new device driver usb [ 0.389071] mc: Linux media interface: v0.10 [ 0.389098] videodev: Linux video capture interface: v2.00 [ 0.389384] pps_core: LinuxPPS API ver. 1 registered [ 0.389396] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.389419] PTP clock support registered [ 0.389640] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.389952] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.390056] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.390626] Registered efivars operations [ 0.395963] FPGA manager framework [ 0.396071] Advanced Linux Sound Architecture Driver Initialized. [ 0.396645] Bluetooth: Core ver 2.22 [ 0.396684] NET: Registered protocol family 31 [ 0.396697] Bluetooth: HCI device and connection manager initialized [ 0.396712] Bluetooth: HCI socket layer initialized [ 0.396748] Bluetooth: L2CAP socket layer initialized [ 0.396770] Bluetooth: SCO socket layer initialized [ 0.398388] camchar: rtcpu character device driver loaded [ 0.399089] clocksource: Switched to clocksource arch_sys_counter [ 0.694406] VFS: Disk quotas dquot_6.6.0 [ 0.694519] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.694859] pnp: PnP ACPI: disabled [ 0.706199] la/ptsa driver initialized. [ 0.706316] NET: Registered protocol family 2 [ 0.706507] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.712643] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.712788] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.713039] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.713470] TCP: Hash tables configured (established 65536 bind 65536) [ 0.713602] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.713704] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.713932] NET: Registered protocol family 1 [ 0.714580] RPC: Registered named UNIX socket transport module. [ 0.714596] RPC: Registered udp transport module. [ 0.714607] RPC: Registered tcp transport module. [ 0.714617] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.714633] PCI: CLS 0 bytes, default 64 [ 0.714831] Trying to unpack rootfs image as initramfs... [ 0.900543] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.902730] Freeing initrd memory: 8196K [ 0.906114] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.906149] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.906180] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.906467] kvm [1]: IPA Size Limit: 40 bits [ 0.906927] kvm [1]: vgic interrupt IRQ9 [ 0.907386] kvm [1]: VHE mode initialized successfully [ 0.908420] Initialise system trusted keyrings [ 0.908614] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.912206] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.912819] NFS: Registering the id_resolver key type [ 0.912850] Key type id_resolver registered [ 0.912861] Key type id_legacy registered [ 0.912941] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.912960] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.913006] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.919960] NET: Registered protocol family 38 [ 0.919984] Key type asymmetric registered [ 0.919996] Asymmetric key parser 'x509' registered [ 0.920038] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.920231] io scheduler mq-deadline registered [ 0.920246] io scheduler kyber registered [ 0.924387] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.926739] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.926806] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.926864] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.926919] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.927005] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.934053] scrncapt: init (heads:4 wins:6 planes:4) [ 0.934221] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.935633] EINJ: ACPI disabled. [ 0.942084] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.942125] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.942136] tegra-pmc: ### PMC reset level: L1 [ 0.942146] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.942187] tegra-pmc: PMC Prod config success [ 0.948071] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.433749] random: fast init done [ 2.500746] printk: console [ttyTCU0] enabled [ 2.506584] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.511379] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.516188] arm-smmu 10000000.iommu: stage 1 translation [ 2.521685] arm-smmu 10000000.iommu: stage 2 translation [ 2.526939] arm-smmu 10000000.iommu: nested translation [ 2.532539] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.539713] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.549162] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.552598] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.559400] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.566862] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.572441] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.577174] arm-smmu 12000000.iommu: stage 1 translation [ 2.582688] arm-smmu 12000000.iommu: stage 2 translation [ 2.588097] arm-smmu 12000000.iommu: nested translation [ 2.593266] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.600444] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.609747] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.613839] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.620394] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.627366] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.637284] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.640829] tegra_profiler: auth: init [ 2.644930] THERMAL EST: found 3 subdevs [ 2.648226] THERMAL EST num_resources: 0 [ 2.652066] [THERMAL EST subdev 0] [ 2.655648] [THERMAL EST subdev 1] [ 2.659046] [THERMAL EST subdev 2] [ 2.662050] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.668673] THERMAL EST: thz register success. [ 2.673019] THERMAL EST: end of probe, return err: 0 [ 2.677963] nvsciipc: loaded module [ 2.684298] tun: Universal TUN/TAP device driver, 1.6 [ 2.687385] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.694059] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.699628] e1000e: Intel(R) PRO/1000 Network Driver [ 2.704565] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.710658] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.715678] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.722094] PPP generic driver version 2.4.2 [ 2.726141] PPP BSD Compression module registered [ 2.730943] PPP Deflate Compression module registered [ 2.735902] PPP MPPE Compression module registered [ 2.741164] usbcore: registered new interface driver r8152 [ 2.746417] usbcore: registered new interface driver asix [ 2.752010] usbcore: registered new interface driver ax88179_178a [ 2.757869] usbcore: registered new interface driver cdc_ether [ 2.764099] usbcore: registered new interface driver net1080 [ 2.769702] usbcore: registered new interface driver cdc_subset [ 2.775467] usbcore: registered new interface driver zaurus [ 2.781154] usbcore: registered new interface driver cdc_ncm [ 2.786833] usbcore: registered new interface driver aqc111 [ 2.792480] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.798857] ohci-pci: OHCI PCI platform driver [ 2.803136] ohci-platform: OHCI generic platform driver [ 2.808514] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.815020] usbcore: registered new interface driver uas [ 2.819415] usbcore: registered new interface driver usb-storage [ 2.825526] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.831209] mousedev: PS/2 mouse device common for all mice [ 2.836559] usbcore: registered new interface driver xpad [ 2.844252] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.847287] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.855114] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.861571] i2c /dev entries driver [ 2.864941] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.870622] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.875755] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.881174] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.886740] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.892047] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.897466] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.908955] device-mapper: uevent: version 1.0.3 [ 2.909385] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.917429] cpuidle: Initializing cpuidle driver [ 2.921558] sdhci: Secure Digital Host Controller Interface driver [ 2.926656] sdhci: Copyright(c) Pierre Ossman [ 2.930755] Synopsys Designware Multimedia Card Interface Driver [ 2.937162] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.943275] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.943716] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.956255] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.974251] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.982904] vdd-1v0: supplied by regulator-dummy [ 2.988257] vdd-1v8-hs: supplied by regulator-dummy [ 2.992882] vdd-1v8-ls: supplied by regulator-dummy [ 2.997544] vdd-1v8-ao: supplied by regulator-dummy [ 3.001368] vddio-ddr-1v1: supplied by regulator-dummy [ 3.005617] vdd-rtc: supplied by regulator-dummy [ 3.007247] spmic-ldo1: supplied by regulator-dummy [ 3.008330] vdd-ao-3v3: supplied by regulator-dummy [ 3.014336] vddio-emmc-3v3: supplied by regulator-dummy [ 3.020373] spmic-ldo4: supplied by regulator-dummy [ 3.021473] vdd-usb-3v3: supplied by regulator-dummy [ 3.027916] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.033926] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.039252] spmic-ldo8: supplied by vdd-1v8-ls [ 3.040572] gpio-510 (gpio_default): hogged as output/high [ 3.043176] gpio-511 (gpio_default): hogged as output/high [ 3.050146] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.188758] max77686-rtc max77620-rtc: registered as rtc0 [ 3.189936] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.190242] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.884631] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.885581] hid: raw HID events driver (C) Jiri Kosina [ 3.886252] usbcore: registered new interface driver usbhid [ 3.886400] usbhid: USB HID core driver [ 3.888073] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.889145] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.932038] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.007680] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.451 ms) ÿá[ 3.974609] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.975248] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.976129] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.976705] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.978167] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.978694] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.979272] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.980508] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.980777] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.982251] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 3.984900] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.997120] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.004044] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.008798] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.015979] denver_knobs_init:MTS_VERSION:55637613 [ 4.027644] t19x_cache tegra-cache: probed [ 4.029955] optee: probing for conduit method. [ 4.030728] optee: revision 3.16 (65cc2218) [ 4.031604] optee: dynamic shared memory is enabled [ 4.036043] optee: initialized driver [ 4.043644] nvpmodel: initialized successfully [ 4.044459] tegra_hv: get_hvd: not initialized yet [ 4.048722] user_ivc_mempool: hypervisor not present [ 4.055282] usbcore: registered new interface driver snd-usb-audio [ 4.060985] u32 classifier [ 4.062267] input device check on [ 4.065966] Actions configured [ 4.069545] Initializing XFRM netlink socket [ 4.074676] NET: Registered protocol family 10 [ 4.080386] Segment Routing with IPv6 [ 4.082097] NET: Registered protocol family 17 [ 4.086129] NET: Registered protocol family 15 [ 4.090771] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.104255] Bluetooth: RFCOMM socket layer initialized [ 4.108905] Bluetooth: RFCOMM ver 1.11 [ 4.113098] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.118574] Bluetooth: HIDP socket layer initialized [ 4.124417] 9pnet: Installing 9P2000 support [ 4.128003] Key type dns_resolver registered [ 4.133172] registered taskstats version 1 [ 4.136443] Loading compiled-in X.509 certificates [ 4.147885] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.152200] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.161838] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.164614] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.172942] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.181542] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.299167] tegra194-pcie 14160000.pcie: Link up [ 4.302109] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.302285] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.302437] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.302643] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.302812] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.303195] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.303581] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.313122] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.313550] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.314021] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.315527] pci 0004:01:00.0: supports D1 D2 [ 4.315656] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.323731] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.323943] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.324172] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.324599] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.324829] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.327881] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.333992] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.341103] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.349865] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.359622] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.364823] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.369887] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.376644] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.386256] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.387661] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.396331] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.404512] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.520136] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.520697] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.520979] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.521113] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.521457] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.521667] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.522033] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.522447] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.542853] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.543483] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.545396] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.546755] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.548166] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.549816] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.550784] pci 0005:00:00.0: Removing from iommu group 7 [ 5.551426] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.587757] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.611890] host1x 13e10000.host1x: initialized [ 5.613593] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.614593] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.615917] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.616712] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.617705] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.618466] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.619569] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.620305] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.621194] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.621934] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.630485] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.637366] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.647553] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.654234] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.664143] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.671469] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.681334] falcon 15340000.vic: Adding to iommu group 17 [ 5.696568] falcon 15340000.vic: initialized [ 5.697648] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.704287] falcon 15380000.nvjpg: initialized [ 5.704962] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.714464] falcon 154c0000.nvenc: initialized [ 5.715330] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.723979] falcon 15a80000.nvenc1: initialized [ 5.724644] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.736108] nvdec 15480000.nvdec: initialized [ 5.736653] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.746194] nvdec 15140000.nvdec1: initialized [ 5.746730] tsec 15500000.tsec: Adding to iommu group 18 [ 5.752666] tsec 15500000.tsec: initialized [ 5.753341] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.762080] tsec 15100000.tsecb: initialized [ 5.766144] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.794201] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.808912] gpio-374 (wifi-enable): hogged as output/high [ 5.809220] gpio-431 (camera-control-output-low): hogged as output/low [ 5.809530] gpio-432 (camera-control-output-low): hogged as output/low [ 5.811476] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.814024] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.814609] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.816275] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.817847] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.823696] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.829155] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.837823] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.844864] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.856563] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.861516] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.867395] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.876019] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.885400] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.892582] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.900209] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.906434] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.916552] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.922550] pva 16000000.pva0: Adding to iommu group 22 [ 5.951168] pva 16000000.pva0: initialized [ 5.955608] pva 16800000.pva1: Adding to iommu group 23 [ 5.967455] pva 16800000.pva1: initialized [ 5.971777] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.985107] nvdla 15880000.nvdla0: initialized [ 5.986585] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.003217] nvdla 158c0000.nvdla1: initialized [ 6.008102] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.008336] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.008425] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.008704] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.009360] tegradccommon 15200000.display-hub: dma mapping done [ 6.009527] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.009640] tegradc 15210000.display: Adding to iommu group 26 [ 6.011876] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.012429] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.017663] tegra_cec 3960000.tegra_cec: probed [ 6.018212] tegradc 15200000.display: Adding to iommu group 26 [ 6.018553] tegradc 15210000.display: disp0 connected to head1->sor [ 6.018691] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.018829] tegradc 15210000.display: DT parsed successfully [ 6.018843] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.023450] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.029460] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.043615] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.047610] generic_infoframe_type: 0x87 [ 6.055651] kfuse 3830000.kfuse: initialized [ 6.060802] tegradc 15200000.display: DT parsed successfully [ 6.068195] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.074056] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.078013] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.078585] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.086332] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.102457] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.109115] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.109141] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.116365] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.124326] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.148558] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.154207] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.162025] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.170349] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.192620] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.195288] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.209381] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.214502] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.224948] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.230156] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.238544] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.246911] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.253672] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.261374] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.268536] usb usb1: Product: xHCI Host Controller [ 6.273258] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.279462] usb usb1: SerialNumber: 3610000.xhci [ 6.285394] hub 1-0:1.0: USB hub found [ 6.288066] hub 1-0:1.0: 4 ports detected [ 6.292676] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.297425] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.305285] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.312973] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.320840] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.328083] usb usb2: Product: xHCI Host Controller [ 6.332868] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.339020] usb usb2: SerialNumber: 3610000.xhci [ 6.344619] hub 2-0:1.0: USB hub found [ 6.347499] hub 2-0:1.0: 4 ports detected [ 6.390105] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.396349] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.397995] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.398181] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.411843] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.412967] tegra194-cpufreq ccplex: probed with BWMGR [ 6.414264] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.414780] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.415340] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.416653] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.424929] tegra194-vi5 15c10000.vi: initialized [ 6.425345] mmc0: CQHCI version 5.10 [ 6.426544] tegradc 15210000.display: disp0 connected to head1->sor [ 6.427843] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.431359] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.437816] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.444983] tegradc 15210000.display: DT parsed successfully [ 6.452866] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.452892] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.458292] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.458466] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.464967] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.471145] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.471757] generic_infoframe_type: 0x87 [ 6.479186] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.487169] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.492387] tegradc 15200000.display: DT parsed successfully [ 6.500099] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.500106] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.501464] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.503916] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.518031] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.522843] nvethernet 2490000.ethernet: Macsec not supported [ 6.524187] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.529328] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.529339] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.537392] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.544104] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.552010] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.557773] mmc0: Command Queue Engine enabled [ 6.557778] mmc0: periodic cache flush enabled [ 6.557793] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.558324] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.558502] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.560307] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.562305] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.562481] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.562724] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.566252] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.566908] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.566913] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.569020] tegradc 15200000.display: probed [ 6.694945] Console: switching to colour frame buffer device 240x67 [ 6.695989] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.700921] tegradc 15200000.display: fb registered [ 6.708674] tegra-se-nvhost 15810000.se: initialized [ 6.712183] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.722082] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.723994] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.729607] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.735373] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.741799] tegra-se-nvhost 15820000.se: initialized [ 6.753924] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.759046] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.764901] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.765336] tegra-se-nvhost 15830000.se: initialized [ 6.772757] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.772765] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.778816] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.785113] usb 1-2: Manufacturer: Generic [ 6.790156] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.797972] hub 1-2:1.0: USB hub found [ 6.800786] tegra-se-nvhost 15840000.se: initialized [ 6.807635] hub 1-2:1.0: 4 ports detected [ 6.811063] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.811966] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.813466] tegra_actmon d230000.actmon: in actmon_register()... [ 6.813660] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.814041] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.814580] hvc_sysfs: hypervisor is not present [ 6.842747] ALSA device list: [ 6.846504] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.853358] No soundcards found. [ 6.857976] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.880762] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.883997] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.887112] Extcon AUX1(HDMI) enable [ 6.898183] tegradc 15210000.display: disp1 connected to head1->sor [ 6.904615] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.911848] tegradc 15210000.display: DT parsed successfully [ 6.917712] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.925527] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.931460] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.944992] tegradc 15210000.display: probed [ 6.945356] tegradc 15210000.display: fb registered [ 6.947014] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.950338] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.955289] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.955294] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.955299] usb 2-3: Manufacturer: Generic [ 6.957354] Freeing unused kernel memory: 3968K [ 6.962688] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.979256] Run /init as init process [ 6.983652] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.000562] tegradc 15210000.display: blank - powerdown [ 7.005697] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.013529] Extcon DP: HPD disabled [ 7.017276] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.024138] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.029731] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.037098] hub 2-3:1.0: USB hub found [ 7.040460] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.047199] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.053438] Root device found: mmcblk0p1 [ 7.054515] hub 2-3:1.0: 4 ports detected [ 7.058770] Found dev node: /dev/mmcblk0p1 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.065109] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.065199] tegradc 15200000.display: blank - powerdown [ 7.100366] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.104329] Rootfs mounted over mmcblk0p1 [ 7.111527] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.111553] Extcon AUX1(HDMI) disable [ 7.134227] Switching from initrd to actual rootfs [ 7.135044] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.136016] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.149332] tegradc 15200000.display: unblank [ 7.150520] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.150721] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.156981] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.158955] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.163022] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.163025] Extcon AUX1(HDMI) enable [ 7.175706] tegradc 15200000.display: sync windows ret = 246 [ 7.206113] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.207658] Extcon HDMI: HPD enabled [ 7.209093] tegradc 15200000.display: hdmi: plugged [ 7.216408] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.217935] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.219413] usb 1-3: Product: Bluetooth Radio [ 7.222744] usb 1-3: Manufacturer: Realtek [ 7.226957] usb 1-3: SerialNumber: 00e04c000001 [ 7.294342] systemd[1]: System time before build time, advancing clock. [ 7.367605] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.372919] systemd[1]: Detected architecture arm64. [ 7.415235] systemd[1]: Set hostname to . [ 7.583383] systemd-sysv-generator[258]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.930179] random: systemd: uninitialized urandom read (16 bytes read) [ 7.932102] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.933879] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.939928] systemd[1]: Created slice system-modprobe.slice. [ 7.943549] random: systemd: uninitialized urandom read (16 bytes read) [ 7.946333] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.949836] random: systemd: uninitialized urandom read (16 bytes read) [ 7.952627] systemd[1]: Created slice User and Session Slice. [ 7.956456] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.960964] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.964580] systemd[1]: Reached target User and Group Name Lookups. [ 7.968068] systemd[1]: Reached target Slices. [ 7.971378] systemd[1]: Reached target Swap. [ 7.975758] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.979665] systemd[1]: Listening on Syslog Socket. [ 7.983507] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.987055] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.991603] systemd[1]: Listening on Journal Audit Socket. [ 7.995461] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.999504] systemd[1]: Listening on Journal Socket. [ 8.003413] systemd[1]: Listening on udev Control Socket. [ 8.007054] systemd[1]: Listening on udev Kernel Socket. [ 8.017060] systemd[1]: Mounting Huge Pages File System... [ 8.027149] systemd[1]: Mounting POSIX Message Queue File System... [ 8.035682] systemd[1]: Mounting RPC Pipe File System... [ 8.044832] systemd[1]: Mounting Kernel Debug File System... [ 8.053594] systemd[1]: Mounting Kernel Trace File System... [ 8.064026] systemd[1]: Starting Journal Service... [ 8.073161] systemd[1]: Starting Set the console keyboard layout... [ 8.081677] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.085491] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.092057] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.100058] systemd[1]: Started Nameserver information manager. [ 8.104339] systemd[1]: Reached target Network (Pre). [ 8.111228] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.111430] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.117837] systemd[1]: Starting Load Kernel Modules... [ 8.126440] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.134538] systemd[1]: Starting udev Coldplug all Devices... [ 8.146027] systemd[1]: Mounted Huge Pages File System. [ 8.150052] systemd[1]: Mounted POSIX Message Queue File System. [ 8.153835] systemd[1]: Mounted RPC Pipe File System. [ 8.155726] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.161375] systemd[1]: Mounted Kernel Debug File System. [ 8.165110] systemd[1]: Mounted Kernel Trace File System. [ 8.169694] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.171855] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.172712] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.174984] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.175000] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.175005] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.175390] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.176751] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.178076] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.193386] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.204819] systemd[1]: nvfb-udev.service: Succeeded. [ 8.209144] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.222793] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.228545] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.230351] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.242247] systemd[1]: Starting Load/Save Random Seed... [ 8.250605] systemd[1]: Starting Create System Users... [ 8.284001] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.284001] [ 8.301967] systemd[1]: Finished Create System Users. [ 8.311613] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.318535] systemd[1]: Finished Load Kernel Modules. [ 8.323269] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.330538] systemd[1]: Mounting Kernel Configuration File System... [ 8.340956] systemd[1]: Started OP-TEE Client Supplicant. [ 8.349406] systemd[1]: Starting Apply Kernel Variables... [ 8.360760] systemd[1]: Finished Set the console keyboard layout. [ 8.367994] systemd[1]: Mounted Kernel Configuration File System. [ 8.379676] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.383845] systemd[1]: Reached target Local File Systems (Pre). [ 9.563124] random: crng init done [ 9.564454] random: 7 urandom warning(s) missed due to ratelimiting [ 9.856189] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.864154] imx219 9-0010: board setup failed [ 9.864272] imx219: probe of 9-0010 failed with error -121 [ 9.878260] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.884802] imx219 10-0010: board setup failed [ 9.886133] imx219: probe of 10-0010 failed with error -121 [ 9.955175] hot-surface-alert cooling state: 0 -> 1 [ 10.642118] using random self ethernet address [ 10.652803] using random host ethernet address [ 11.450577] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.452410] Creating 1 MTD partitions on "spi6.0": [ 11.454155] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.183055] using random self ethernet address [ 12.184770] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.820556] nvidia: loading out-of-tree module taints kernel. [ 59.256658] watchdog: watchdog0: watchdog did not stop! [ 59.752025] Trying to unregister non-registered hwtime source [ 62.814075] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.815879] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout,ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.045] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.086] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.107] I> Temperature = 68000 [0000.110] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.325] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.631] I> edid read success [0003.643] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.644] I> width = 1920, height = 1080, frequency = 148500000 [0003.644] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.645] I> width = 720, height = 480, frequency = 26973026 [0003.649] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 720, height = 480, frequency = 26973026 [0003.683] I> width = 720, height = 576, frequency = 26973026 [0003.688] I> width = 3840, height = 2160, frequency = 296703296 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.717] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.733] I> hdmi_enable, HDMI initialisation complete [0003.743] initializing target [0003.743] calling apps_init() [0003.744] starting app kernel_boot_app [0003.745] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000695] Console: colour dummy device 80x25 [ 0.002219] printk: console [tty0] enabled [ 0.002296] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002332] pid_max: default: 32768 minimum: 301 [ 0.002531] LSM: Security Framework initializing [ 0.002604] Yama: becoming mindful. [ 0.002664] SELinux: Initializing. [ 0.002826] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002874] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005974] rcu: Hierarchical SRCU implementation. [ 0.006238] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006901] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006934] DTB Build time: Aug 10 2022 20:31:49 [ 0.009671] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009949] Remapping and enabling EFI services. [ 0.011843] smp: Bringing up secondary CPUs ... [ 0.041031] Detected PIPT I-cache on CPU1 [ 0.041133] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070599] Detected PIPT I-cache on CPU2 [ 0.070773] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100374] Detected PIPT I-cache on CPU3 [ 0.100463] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130242] Detected PIPT I-cache on CPU4 [ 0.130410] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160151] Detected PIPT I-cache on CPU5 [ 0.160288] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160653] smp: Brought up 1 node, 6 CPUs [ 0.160906] SMP: Total of 6 processors activated. [ 0.160960] CPU features: detected: Privileged Access Never [ 0.160982] CPU features: detected: LSE atomic instructions [ 0.160995] CPU features: detected: User Access Override [ 0.161009] CPU features: detected: 32-bit EL0 Support [ 0.161038] CPU features: detected: RAS Extension Support [ 0.161051] CPU features: detected: CRC32 instructions [ 0.161064] CPU features: detected: 32-bit EL1 Support [ 0.229189] CPU: All CPU(s) started at EL2 [ 0.235504] devtmpfs: initialized [ 0.284618] Registered cp15_barrier emulation handler [ 0.284774] Registered setend emulation handler [ 0.284796] KASLR enabled [ 0.285063] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285088] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286491] pinctrl core: initialized pinctrl subsystem [ 0.287411] SMBIOS 3.0.0 present. [ 0.287441] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288060] NET: Registered protocol family 16 [ 0.289915] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.290400] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291049] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291106] audit: initializing netlink subsys (disabled) [ 0.291371] audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1 [ 0.291786] thermal_sys: Registered thermal governor 'step_wise' [ 0.291792] thermal_sys: Registered thermal governor 'power_allocator' [ 0.291806] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295018] cpuidle: using governor menu [ 0.295266] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295634] ASID allocator initialised with 32768 entries [ 0.295849] Serial: AMBA PL011 UART driver [ 0.299024] Tegra reboot handler registered. [ 0.374569] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.374700] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.374868] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.374913] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.375029] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.375071] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.375183] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.375224] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.375340] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.375381] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.377605] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.377641] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.377670] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.377697] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.377726] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.377767] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.377808] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.377845] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.377872] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.377897] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.377922] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.377947] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.377970] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.378019] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.378061] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.378091] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.378130] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.378220] mc-err: mcerr ops are set to t19x [ 0.390369] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390394] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390406] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390417] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.396950] ACPI: Interpreter disabled. [ 0.398349] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.399608] iommu: Default domain type: Translated [ 0.399682] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400030] SCSI subsystem initialized [ 0.400183] usbcore: registered new interface driver usbfs [ 0.400236] usbcore: registered new interface driver hub [ 0.400269] usbcore: registered new device driver usb [ 0.400656] mc: Linux media interface: v0.10 [ 0.400687] videodev: Linux video capture interface: v2.00 [ 0.400972] pps_core: LinuxPPS API ver. 1 registered [ 0.400983] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401002] PTP clock support registered [ 0.401194] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.401544] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401629] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.402176] Registered efivars operations [ 0.407337] FPGA manager framework [ 0.407437] Advanced Linux Sound Architecture Driver Initialized. [ 0.408011] Bluetooth: Core ver 2.22 [ 0.408047] NET: Registered protocol family 31 [ 0.408058] Bluetooth: HCI device and connection manager initialized [ 0.408090] Bluetooth: HCI socket layer initialized [ 0.408105] Bluetooth: L2CAP socket layer initialized [ 0.408126] Bluetooth: SCO socket layer initialized [ 0.409764] camchar: rtcpu character device driver loaded [ 0.410465] clocksource: Switched to clocksource arch_sys_counter [ 0.702579] VFS: Disk quotas dquot_6.6.0 [ 0.702650] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.702995] pnp: PnP ACPI: disabled [ 0.714895] la/ptsa driver initialized. [ 0.715034] NET: Registered protocol family 2 [ 0.715192] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.720830] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.720902] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.721200] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.721632] TCP: Hash tables configured (established 65536 bind 65536) [ 0.721757] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.721845] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722068] NET: Registered protocol family 1 [ 0.722751] RPC: Registered named UNIX socket transport module. [ 0.722765] RPC: Registered udp transport module. [ 0.722775] RPC: Registered tcp transport module. [ 0.722783] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.722798] PCI: CLS 0 bytes, default 64 [ 0.723085] Trying to unpack rootfs image as initramfs... [ 0.906950] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.909078] Freeing initrd memory: 8196K [ 0.913181] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.913219] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.913275] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.913683] kvm [1]: IPA Size Limit: 40 bits [ 0.914184] kvm [1]: vgic interrupt IRQ9 [ 0.914795] kvm [1]: VHE mode initialized successfully [ 0.916156] Initialise system trusted keyrings [ 0.916420] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.921570] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.922319] NFS: Registering the id_resolver key type [ 0.922347] Key type id_resolver registered [ 0.922357] Key type id_legacy registered [ 0.922456] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.922474] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.922502] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.931306] NET: Registered protocol family 38 [ 0.931327] Key type asymmetric registered [ 0.931339] Asymmetric key parser 'x509' registered [ 0.931389] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.931582] io scheduler mq-deadline registered [ 0.931593] io scheduler kyber registered [ 0.936050] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.938193] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.938252] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.938303] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.938353] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.938409] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.942404] scrncapt: init (heads:4 wins:6 planes:4) [ 0.942739] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.943387] EINJ: ACPI disabled. [ 0.945753] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.945774] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.945784] tegra-pmc: ### PMC reset level: L1 [ 0.945793] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.945829] tegra-pmc: PMC Prod config success [ 0.950319] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.954582] random: fast init done [ 0.955528] printk: console [ttyTCU0] enabled [ 2.507336] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.511475] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.516094] arm-smmu 10000000.iommu: stage 1 translation [ 2.521799] arm-smmu 10000000.iommu: stage 2 translation [ 2.527041] arm-smmu 10000000.iommu: nested translation [ 2.532647] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.539818] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.551171] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.552650] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.559503] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.567129] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.572280] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.577035] arm-smmu 12000000.iommu: stage 1 translation [ 2.582782] arm-smmu 12000000.iommu: stage 2 translation [ 2.587950] arm-smmu 12000000.iommu: nested translation [ 2.593619] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.600799] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.611954] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.613898] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.620233] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.627732] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.637582] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.640894] tegra_profiler: auth: init [ 2.644907] THERMAL EST: found 3 subdevs [ 2.648313] THERMAL EST num_resources: 0 [ 2.652415] [THERMAL EST subdev 0] [ 2.655479] [THERMAL EST subdev 1] [ 2.659172] [THERMAL EST subdev 2] [ 2.662118] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.668618] THERMAL EST: thz register success. [ 2.672838] THERMAL EST: end of probe, return err: 0 [ 2.678482] nvsciipc: loaded module [ 2.685299] tun: Universal TUN/TAP device driver, 1.6 [ 2.687992] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.693908] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.699751] e1000e: Intel(R) PRO/1000 Network Driver [ 2.704390] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.710761] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.716023] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.722139] PPP generic driver version 2.4.2 [ 2.726519] PPP BSD Compression module registered [ 2.730767] PPP Deflate Compression module registered [ 2.735986] PPP MPPE Compression module registered [ 2.741025] usbcore: registered new interface driver r8152 [ 2.746769] usbcore: registered new interface driver asix [ 2.752107] usbcore: registered new interface driver ax88179_178a [ 2.757975] usbcore: registered new interface driver cdc_ether [ 2.764186] usbcore: registered new interface driver net1080 [ 2.769561] usbcore: registered new interface driver cdc_subset [ 2.775865] usbcore: registered new interface driver zaurus [ 2.781258] usbcore: registered new interface driver cdc_ncm [ 2.787000] usbcore: registered new interface driver aqc111 [ 2.792608] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.798652] ohci-pci: OHCI PCI platform driver [ 2.802953] ohci-platform: OHCI generic platform driver [ 2.808834] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.815182] usbcore: registered new interface driver uas [ 2.819241] usbcore: registered new interface driver usb-storage [ 2.825432] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.831643] mousedev: PS/2 mouse device common for all mice [ 2.836661] usbcore: registered new interface driver xpad [ 2.844459] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.847146] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.855183] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.861779] i2c /dev entries driver [ 2.865104] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.870863] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.876068] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.881353] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.886678] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.892158] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.897912] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.911125] device-mapper: uevent: version 1.0.3 [ 2.911607] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.918531] cpuidle: Initializing cpuidle driver [ 2.922646] sdhci: Secure Digital Host Controller Interface driver [ 2.926748] sdhci: Copyright(c) Pierre Ossman [ 2.931110] Synopsys Designware Multimedia Card Interface Driver [ 2.937324] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.943263] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.943980] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.956421] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.974323] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.983426] vdd-1v0: supplied by regulator-dummy [ 2.988831] vdd-1v8-hs: supplied by regulator-dummy [ 2.993462] vdd-1v8-ls: supplied by regulator-dummy [ 2.998180] vdd-1v8-ao: supplied by regulator-dummy [ 3.001947] vddio-ddr-1v1: supplied by regulator-dummy [ 3.006254] vdd-rtc: supplied by regulator-dummy [ 3.007865] spmic-ldo1: supplied by regulator-dummy [ 3.008985] vdd-ao-3v3: supplied by regulator-dummy [ 3.015069] vddio-emmc-3v3: supplied by regulator-dummy [ 3.021190] spmic-ldo4: supplied by regulator-dummy [ 3.022344] vdd-usb-3v3: supplied by regulator-dummy [ 3.028372] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.034387] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.039770] spmic-ldo8: supplied by vdd-1v8-ls [ 3.041126] gpio-510 (gpio_default): hogged as output/high [ 3.043263] gpio-511 (gpio_default): hogged as output/high [ 3.050297] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.188229] max77686-rtc max77620-rtc: registered as rtc0 [ 3.189177] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.189488] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.881344] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.882380] hid: raw HID events driver (C) Jiri Kosina [ 3.883104] usbcore: registered new interface driver usbhid [ 3.883243] usbhid: USB HID core driver [ 3.884912] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.886048] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.983648] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.059198] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.360 ms) ÿá[ 3.971170] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.971788] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.972844] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.973696] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.975580] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.976267] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.976929] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.978543] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.978865] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.980695] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.987621] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.994209] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.999188] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.005506] denver_knobs_init:MTS_VERSION:55637613 [ 4.017704] t19x_cache tegra-cache: probed [ 4.022045] optee: probing for conduit method. [ 4.023010] optee: revision 3.16 (65cc2218) [ 4.024127] optee: dynamic shared memory is enabled [ 4.026159] optee: initialized driver [ 4.033571] nvpmodel: initialized successfully [ 4.034200] tegra_hv: get_hvd: not initialized yet [ 4.038416] user_ivc_mempool: hypervisor not present [ 4.044641] usbcore: registered new interface driver snd-usb-audio [ 4.051075] u32 classifier [ 4.052380] input device check on [ 4.056089] Actions configured [ 4.059531] Initializing XFRM netlink socket [ 4.064393] NET: Registered protocol family 10 [ 4.070809] Segment Routing with IPv6 [ 4.071978] NET: Registered protocol family 17 [ 4.075999] NET: Registered protocol family 15 [ 4.080661] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.094339] Bluetooth: RFCOMM socket layer initialized [ 4.098923] Bluetooth: RFCOMM ver 1.11 [ 4.102560] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.108682] Bluetooth: HIDP socket layer initialized [ 4.114558] 9pnet: Installing 9P2000 support [ 4.118127] Key type dns_resolver registered [ 4.123518] registered taskstats version 1 [ 4.126559] Loading compiled-in X.509 certificates [ 4.140128] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.142138] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.153009] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.154361] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.163081] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.171174] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.286627] tegra194-pcie 14160000.pcie: Link up [ 4.289719] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.289936] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.290069] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.290416] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.290710] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.291330] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.291776] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.304885] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.305349] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.305877] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.307528] pci 0004:01:00.0: supports D1 D2 [ 4.307731] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.318569] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.318946] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.319242] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.319725] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.319956] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.320147] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.321133] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.328567] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.337332] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.347430] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.352122] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.357873] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.364577] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.373537] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.375290] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.383745] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.391958] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.507395] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.507812] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.508003] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.508223] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.508474] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.508633] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.508988] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.509398] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.528933] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.529171] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.530987] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.532254] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.533786] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.535409] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.536425] pci 0005:00:00.0: Removing from iommu group 7 [ 5.536676] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.571956] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.595200] host1x 13e10000.host1x: initialized [ 5.596797] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.597580] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.598963] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.599799] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.601068] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.601708] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.603058] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.603668] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.604616] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.607517] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.617207] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.624570] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.634575] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.641224] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.651449] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.658154] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.668503] falcon 15340000.vic: Adding to iommu group 17 [ 5.683426] falcon 15340000.vic: initialized [ 5.684535] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.689876] falcon 15380000.nvjpg: initialized [ 5.690591] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.702095] falcon 154c0000.nvenc: initialized [ 5.702744] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.711906] falcon 15a80000.nvenc1: initialized [ 5.712606] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.724516] nvdec 15480000.nvdec: initialized [ 5.725120] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.735288] nvdec 15140000.nvdec1: initialized [ 5.735987] tsec 15500000.tsec: Adding to iommu group 18 [ 5.741780] tsec 15500000.tsec: initialized [ 5.742318] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.748943] tsec 15100000.tsecb: initialized [ 5.753198] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.780107] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.792030] gpio-374 (wifi-enable): hogged as output/high [ 5.792294] gpio-431 (camera-control-output-low): hogged as output/low [ 5.792695] gpio-432 (camera-control-output-low): hogged as output/low [ 5.794330] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.796279] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.796843] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.799835] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.805121] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.811037] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.816476] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.824845] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.831790] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.843608] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.848707] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.854639] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.863254] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.872767] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.880303] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.887516] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.893882] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.903572] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.909511] pva 16000000.pva0: Adding to iommu group 22 [ 5.937052] pva 16000000.pva0: initialized [ 5.942388] pva 16800000.pva1: Adding to iommu group 23 [ 5.954474] pva 16800000.pva1: initialized [ 5.959307] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.973324] nvdla 15880000.nvdla0: initialized [ 5.974748] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.983826] nvdla 158c0000.nvdla1: initialized [ 5.986751] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.987099] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.988011] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.988772] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 5.988877] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.989046] tegradc 15210000.display: Adding to iommu group 26 [ 5.989294] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 5.989607] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.990036] tegra_cec 3960000.tegra_cec: probed [ 5.991917] tegradccommon 15200000.display-hub: dma mapping done [ 5.995808] tegradc 15200000.display: Adding to iommu group 26 [ 6.000288] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.023545] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.028117] kfuse 3830000.kfuse: initialized [ 6.033150] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.038944] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.045825] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.052241] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.061993] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.066866] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.075825] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.081204] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.102364] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.102809] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.104578] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.112558] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.121483] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.127838] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.135644] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.142583] usb usb1: Product: xHCI Host Controller [ 6.147513] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.153811] usb usb1: SerialNumber: 3610000.xhci [ 6.159421] hub 1-0:1.0: USB hub found [ 6.162663] hub 1-0:1.0: 4 ports detected [ 6.167345] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.172045] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.179388] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.187140] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.194996] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.202233] usb usb2: Product: xHCI Host Controller [ 6.207439] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.213652] usb usb2: SerialNumber: 3610000.xhci [ 6.219199] hub 2-0:1.0: USB hub found [ 6.222090] hub 2-0:1.0: 4 ports detected [ 6.265348] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.271277] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.272687] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.272925] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.286124] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.287191] tegra194-cpufreq ccplex: probed with BWMGR [ 6.288349] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.288789] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.289233] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.290622] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.297877] tegra194-vi5 15c10000.vi: initialized [ 6.299716] tegradc 15210000.display: disp0 connected to head1->sor [ 6.300859] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.302124] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.308294] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.315678] tegradc 15210000.display: DT parsed successfully [ 6.323746] mmc0: CQHCI version 5.10 [ 6.326466] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.326475] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.326480] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.326484] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.329316] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.329476] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.334497] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.339372] generic_infoframe_type: 0x87 [ 6.346159] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.352293] tegradc 15200000.display: DT parsed successfully [ 6.358831] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.361232] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.366738] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.374777] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.380853] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.390492] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.403172] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.403517] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.410863] nvethernet 2490000.ethernet: Macsec not supported [ 6.412161] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.418661] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.419041] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.427524] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.447480] mmc0: Command Queue Engine enabled [ 6.450837] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.451646] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.451652] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.453639] tegradc 15200000.display: probed [ 6.456889] mmc0: periodic cache flush enabled [ 6.456907] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.457527] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.462818] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.470576] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.478144] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.487662] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.549746] random: crng init done [ 6.570758] Console: switching to colour frame buffer device 240x67 [ 6.572725] tegra-se-nvhost 15810000.se: initialized [ 6.576861] tegradc 15200000.display: fb registered [ 6.576939] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.581436] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.586815] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.593213] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.600989] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.606782] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.625322] tegra-se-nvhost 15820000.se: initialized [ 6.631198] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.636276] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.642633] tegra-se-nvhost 15830000.se: initialized [ 6.648742] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.653518] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.660278] tegra-se-nvhost 15840000.se: initialized [ 6.666220] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.672379] tegra_actmon d230000.actmon: in actmon_register()... [ 6.676921] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.681755] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.691258] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.692042] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.699808] hvc_sysfs: hypervisor is not present [ 6.706836] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.746529] ALSA device list: [ 6.746622] No soundcards found. [ 6.747631] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.747844] Extcon AUX1(HDMI) enable [ 6.748121] tegradc 15210000.display: disp1 connected to head1->sor [ 6.748454] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.749747] tegradc 15210000.display: DT parsed successfully [ 6.750172] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.755496] tegradc 15210000.display: Display dc.00000000ab89335f registered with id=1 [ 6.763756] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.763779] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.772228] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.779241] usb 1-2: Manufacturer: Generic [ 6.783705] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.790535] tegradc 15210000.display: probed [ 6.805177] tegradc 15210000.display: fb registered [ 6.809671] hub 1-2:1.0: USB hub found [ 6.812961] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.814625] hub 1-2:1.0: 4 ports detected [ 6.815174] Freeing unused kernel memory: 3968K [ 6.820836] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.837638] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.842703] tegradc 15210000.display: blank - powerdown [ 6.847770] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.850698] Run /init as init process [ 6.856172] Extcon DP: HPD disabled [ 6.863154] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.863166] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.867316] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.875667] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.890142] tegradc 15200000.display: blank - powerdown [ 6.904260] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.904266] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.904270] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.904274] usb 2-3: Manufacturer: Generic [ 6.914858] hub 2-3:1.0: USB hub found [ 6.916672] hub 2-3:1.0: 4 ports detected [ 6.932182] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.932187] Extcon AUX1(HDMI) disable [ 6.955435] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.956261] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.967900] tegradc 15200000.display: unblank [ 6.969073] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.969251] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.975105] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.976936] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.980918] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.980922] Extcon AUX1(HDMI) enable [ 6.993690] tegradc 15200000.display: sync windows ret = 247 [ 7.010494] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.022528] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.027570] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.033977] Extcon HDMI: HPD enabled [ 7.037856] tegradc 15200000.display: hdmi: plugged [ 7.076105] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.077474] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.080255] Root device found: mmcblk0p1 [ 7.083519] Found dev node: /dev/mmcblk0p1 [ 7.119832] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.125141] Rootfs mounted over mmcblk0p1 [ 7.162195] Switching from initrd to actual rootfs [ 7.187645] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.188993] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.190248] usb 1-3: Product: Bluetooth Radio [ 7.191521] usb 1-3: Manufacturer: Realtek [ 7.192716] usb 1-3: SerialNumber: 00e04c000001 [ 7.324179] systemd[1]: System time before build time, advancing clock. [ 7.395506] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.400264] systemd[1]: Detected architecture arm64. [ 7.442064] systemd[1]: Set hostname to . [ 7.604669] systemd-sysv-generator[241]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.951847] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.953468] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.958824] systemd[1]: Created slice system-modprobe.slice. [ 7.963288] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.967209] systemd[1]: Created slice User and Session Slice. [ 7.970341] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.974365] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.977578] systemd[1]: Reached target User and Group Name Lookups. [ 7.980594] systemd[1]: Reached target Slices. [ 7.983511] systemd[1]: Reached target Swap. [ 7.987315] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.990737] systemd[1]: Listening on Syslog Socket. [ 7.994097] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.997281] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.001319] systemd[1]: Listening on Journal Audit Socket. [ 8.004778] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.008333] systemd[1]: Listening on Journal Socket. [ 8.013384] systemd[1]: Listening on udev Control Socket. [ 8.017641] systemd[1]: Listening on udev Kernel Socket. [ 8.026065] systemd[1]: Mounting Huge Pages File System... [ 8.034257] systemd[1]: Mounting POSIX Message Queue File System... [ 8.042132] systemd[1]: Mounting RPC Pipe File System... [ 8.050775] systemd[1]: Mounting Kernel Debug File System... [ 8.059259] systemd[1]: Mounting Kernel Trace File System... [ 8.069109] systemd[1]: Starting Journal Service... [ 8.077942] systemd[1]: Starting Set the console keyboard layout... [ 8.086279] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.089747] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.096355] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.104383] systemd[1]: Started Nameserver information manager. [ 8.109276] systemd[1]: Reached target Network (Pre). [ 8.116571] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.118340] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.124953] systemd[1]: Starting Load Kernel Modules... [ 8.134317] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.144293] systemd[1]: Starting udev Coldplug all Devices... [ 8.155396] systemd[1]: Mounted Huge Pages File System. [ 8.158931] systemd[1]: Mounted POSIX Message Queue File System. [ 8.162513] systemd[1]: Mounted RPC Pipe File System. [ 8.163552] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.168727] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.170081] systemd[1]: Mounted Kernel Debug File System. [ 8.171047] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.173076] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.173086] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.173090] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.173511] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.174568] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.180598] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.180610] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.189975] systemd[1]: Mounted Kernel Trace File System. [ 8.199138] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.206137] systemd[1]: nvfb-udev.service: Succeeded. [ 8.210532] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.223571] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.236651] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.238384] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.245900] systemd[1]: Starting Load/Save Random Seed... [ 8.254102] systemd[1]: Starting Create System Users... [ 8.272732] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.272732] [ 8.312321] systemd[1]: Finished Load Kernel Modules. [ 8.319908] systemd[1]: Finished Load/Save Random Seed. [ 8.324367] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.331080] systemd[1]: Mounting Kernel Configuration File System... [ 8.338553] systemd[1]: Started OP-TEE Client Supplicant. [ 8.349447] systemd[1]: Starting Apply Kernel Variables... [ 8.359811] systemd[1]: Finished Set the console keyboard layout. [ 8.364126] systemd[1]: Mounted Kernel Configuration File System. [ 9.818871] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.834620] imx219 9-0010: board setup failed [ 9.835924] imx219: probe of 9-0010 failed with error -121 [ 9.852790] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.861659] imx219 10-0010: board setup failed [ 9.864869] imx219: probe of 10-0010 failed with error -121 [ 9.982010] hot-surface-alert cooling state: 0 -> 1 [ 10.073166] using random self ethernet address [ 10.080599] using random host ethernet address [ 11.645753] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.647057] Creating 1 MTD partitions on "spi6.0": [ 11.647067] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.044748] using random self ethernet address [ 12.045890] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.825371] nvidia: loading out-of-tree module taints kernel. [ 58.630544] watchdog: watchdog0: watchdog did not stop! [ 59.083344] Trying to unregister non-registered hwtime source [ 62.140826] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.142408] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERRÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.340] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.341] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.342] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.345] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.360] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.591] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.211] I> Welcome to NVDisp-Init [0003.212] I> NVDisp-Init version: t194-f9ecfedc [0003.212] I> CPU-BL Params @ 0xca020000 [0003.212] I> 0) Base:0x00000000 Size:0x00000000 [0003.213] I> 1) Base:0xc8300000 Size:0x00100000 [0003.213] I> 2) Base:0xc9800000 Size:0x00200000 [0003.213] I> 3) Base:0xc8600000 Size:0x00200000 [0003.216] I> 4) Base:0xc8200000 Size:0x00100000 [0003.220] I> 5) Base:0xc8100000 Size:0x00100000 [0003.225] I> 6) Base:0xc9400000 Size:0x00400000 [0003.229] I> 7) Base:0xc9000000 Size:0x00400000 [0003.234] I> 8) Base:0xc8000000 Size:0x00100000 [0003.238] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.243] I> 10) Base:0xca800000 Size:0x00800000 [0003.247] I> 11) Base:0x40000000 Size:0x00040000 [0003.252] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.256] I> 13) Base:0x40046000 Size:0x00002000 [0003.260] I> 14) Base:0x40048000 Size:0x00002000 [0003.265] I> 15) Base:0xaf000000 Size:0x00004000 [0003.269] I> 16) Base:0x4004a000 Size:0x00002000 [0003.274] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.278] I> 18) Base:0x4004c000 Size:0x00002000 [0003.283] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.287] I> 20) Base:0x4004e000 Size:0x00002000 [0003.292] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.296] I> 22) Base:0x00000000 Size:0x00000000 [0003.301] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.305] I> 24) Base:0xcc000000 Size:0x02000000 [0003.310] I> 25) Base:0x40050000 Size:0x00002000 [0003.314] I> 26) Base:0x40040000 Size:0x00006000 [0003.318] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.323] I> 28) Base:0xc8400000 Size:0x00200000 [0003.327] I> 29) Base:0xc8800000 Size:0x00400000 [0003.332] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.336] I> 31) Base:0x00000000 Size:0x00000000 [0003.341] I> 32) Base:0xf8000000 Size:0x08000000 [0003.345] I> 33) Base:0xce000000 Size:0x2a000000 [0003.350] I> 34) Base:0xcb000000 Size:0x01000000 [0003.354] I> 35) Base:0xae000000 Size:0x01000000 [0003.359] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.363] I> 37) Base:0xca000000 Size:0x00800000 [0003.368] I> 38) Base:0x80000000 Size:0x20000000 [0003.372] I> 39) Base:0xb0000000 Size:0x08000000 [0003.376] I> 40) Base:0x00000000 Size:0x00000000 [0003.381] I> 41) Base:0x00000000 Size:0x00000000 [0003.385] I> 42) Base:0x00000000 Size:0x00000000 [0003.390] I> 43) Base:0x00000000 Size:0x00000000 [0003.394] I> 44) Base:0x00000000 Size:0x00000000 [0003.399] I> 45) Base:0x00000000 Size:0x00000000 [0003.403] GIC-SPI Target CPU: 0 [0003.406] Interrupts Init done [0003.409] calling constructors [0003.412] initializing heap [0003.415] I> Heap: [0xa0960000 ... 0xadf00000] [0003.419] initializing threads [0003.422] initializing timers [0003.425] creating bootstrap completion thread [0003.429] top of bootstrap2() [0003.432] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.436] initializing platform [0003.439] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.445] W> device prod register failed [0003.448] I> Bl_dtb @0xadf00000 [0003.451] I> gpio framework initialized [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.469] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.475] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.496] I> Boot_device: QSPI_FLASH instance: 0 [0003.500] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.511] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.518] I> QSPI source rate = 204000 Khz [0003.521] I> Requested rate for QSPI clock = 34000 Khz [0003.526] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.531] I> tx_clk_tap_delay : 0 [0003.534] I> rx_clk_tap_delay : 16 [0003.537] I> QSPI Flash Size = 32 MB [0003.545] I> Qspi initialized successfully [0003.545] I> qspi flash-0 params source = boot args [0003.550] W> No board IDs available [0003.553] E> Failed to get board id info! [0003.558] I> sdmmc-3 params source = safe params [0003.566] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.567] W> Cannot find any partition table for 00000003 [0003.572] E> Failed to publish 00000003 [0003.577] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.619] E> invalid display type [0003.620] E> cannot find any other nvdisp nodes [0003.636] I> edid read success [0003.648] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.649] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.650] I> width = 1360, height = 768, frequency = 85500000 [0003.650] I> width = 720, height = 480, frequency = 26973026 [0003.654] I> width = 720, height = 576, frequency = 26973026 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.688] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.748] initializing target [0003.749] calling apps_init() [0003.749] starting app kernel_boot_app [0003.750] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000829] Console: colour dummy device 80x25 [ 0.002361] printk: console [tty0] enabled [ 0.002422] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002460] pid_max: default: 32768 minimum: 301 [ 0.002649] LSM: Security Framework initializing [ 0.002729] Yama: becoming mindful. [ 0.002773] SELinux: Initializing. [ 0.002928] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002966] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006041] rcu: Hierarchical SRCU implementation. [ 0.006295] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007004] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007074] DTB Build time: Aug 10 2022 20:31:49 [ 0.009798] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010085] Remapping and enabling EFI services. [ 0.012126] smp: Bringing up secondary CPUs ... [ 0.043607] Detected PIPT I-cache on CPU1 [ 0.043683] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073556] Detected PIPT I-cache on CPU2 [ 0.073632] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103269] Detected PIPT I-cache on CPU3 [ 0.103360] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133098] Detected PIPT I-cache on CPU4 [ 0.133202] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162842] Detected PIPT I-cache on CPU5 [ 0.162911] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163223] smp: Brought up 1 node, 6 CPUs [ 0.163533] SMP: Total of 6 processors activated. [ 0.163579] CPU features: detected: Privileged Access Never [ 0.163606] CPU features: detected: LSE atomic instructions [ 0.163625] CPU features: detected: User Access Override [ 0.163643] CPU features: detected: 32-bit EL0 Support [ 0.163660] CPU features: detected: RAS Extension Support [ 0.163677] CPU features: detected: CRC32 instructions [ 0.163694] CPU features: detected: 32-bit EL1 Support [ 0.230810] CPU: All CPU(s) started at EL2 [ 0.236264] devtmpfs: initialized [ 0.289600] Registered cp15_barrier emulation handler [ 0.289707] Registered setend emulation handler [ 0.289738] KASLR enabled [ 0.290085] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.290120] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291740] pinctrl core: initialized pinctrl subsystem [ 0.292733] SMBIOS 3.0.0 present. [ 0.292765] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.293403] NET: Registered protocol family 16 [ 0.295270] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295797] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296533] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296603] audit: initializing netlink subsys (disabled) [ 0.296900] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.297322] thermal_sys: Registered thermal governor 'step_wise' [ 0.297329] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297348] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299480] cpuidle: using governor menu [ 0.299750] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300193] ASID allocator initialised with 32768 entries [ 0.300440] Serial: AMBA PL011 UART driver [ 0.303659] Tegra reboot handler registered. [ 0.368122] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.368239] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.368435] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.368480] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.368600] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.368642] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.368799] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.368843] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.368984] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.369026] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.371500] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.371544] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.371578] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.371611] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.371646] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.371691] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.371731] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.371762] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.371810] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.371840] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.371889] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.371921] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.371951] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.371997] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.372041] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.372212] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.372291] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.372406] mc-err: mcerr ops are set to t19x [ 0.383414] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.383441] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.383459] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.383476] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.390982] ACPI: Interpreter disabled. [ 0.392097] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.393303] iommu: Default domain type: Translated [ 0.393387] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.393756] SCSI subsystem initialized [ 0.393955] usbcore: registered new interface driver usbfs [ 0.394000] usbcore: registered new interface driver hub [ 0.394079] usbcore: registered new device driver usb [ 0.394473] mc: Linux media interface: v0.10 [ 0.394503] videodev: Linux video capture interface: v2.00 [ 0.394790] pps_core: LinuxPPS API ver. 1 registered [ 0.394806] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.394833] PTP clock support registered [ 0.395044] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.395357] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.395439] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.395978] Registered efivars operations [ 0.400905] FPGA manager framework [ 0.401016] Advanced Linux Sound Architecture Driver Initialized. [ 0.401603] Bluetooth: Core ver 2.22 [ 0.401643] NET: Registered protocol family 31 [ 0.401658] Bluetooth: HCI device and connection manager initialized [ 0.401679] Bluetooth: HCI socket layer initialized [ 0.401698] Bluetooth: L2CAP socket layer initialized [ 0.401723] Bluetooth: SCO socket layer initialized [ 0.403478] camchar: rtcpu character device driver loaded [ 0.404145] clocksource: Switched to clocksource arch_sys_counter [ 0.689681] VFS: Disk quotas dquot_6.6.0 [ 0.689757] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.690091] pnp: PnP ACPI: disabled [ 0.701962] la/ptsa driver initialized. [ 0.702100] NET: Registered protocol family 2 [ 0.702280] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.708428] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.708504] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.708816] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.709249] TCP: Hash tables configured (established 65536 bind 65536) [ 0.709361] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.709462] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.709683] NET: Registered protocol family 1 [ 0.710284] RPC: Registered named UNIX socket transport module. [ 0.710303] RPC: Registered udp transport module. [ 0.710317] RPC: Registered tcp transport module. [ 0.710330] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.710364] PCI: CLS 0 bytes, default 64 [ 0.710581] Trying to unpack rootfs image as initramfs... [ 0.893804] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.895828] Freeing initrd memory: 8196K [ 0.899471] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.899508] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.899545] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.899879] kvm [1]: IPA Size Limit: 40 bits [ 0.900424] kvm [1]: vgic interrupt IRQ9 [ 0.900959] kvm [1]: VHE mode initialized successfully [ 0.902165] Initialise system trusted keyrings [ 0.902465] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.906662] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.907360] NFS: Registering the id_resolver key type [ 0.907392] Key type id_resolver registered [ 0.907405] Key type id_legacy registered [ 0.907473] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.907496] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.907529] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.915069] NET: Registered protocol family 38 [ 0.915093] Key type asymmetric registered [ 0.915107] Asymmetric key parser 'x509' registered [ 0.915176] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.915398] io scheduler mq-deadline registered [ 0.915416] io scheduler kyber registered [ 0.919802] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.922017] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.922088] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.922146] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.922202] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.922257] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.927077] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.927097] scrncapt: init (heads:4 wins:6 planes:4) [ 0.928246] EINJ: ACPI disabled. [ 0.931307] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.931335] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.931349] tegra-pmc: ### PMC reset level: L1 [ 0.931363] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.931407] tegra-pmc: PMC Prod config success [ 0.936633] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.420834] random: fast init done [ 2.487808] printk: console [ttyTCU0] enabled [ 2.493642] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.498473] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.503263] arm-smmu 10000000.iommu: stage 1 translation [ 2.508779] arm-smmu 10000000.iommu: stage 2 translation [ 2.514295] arm-smmu 10000000.iommu: nested translation [ 2.519371] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.526546] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.535991] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.539684] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.546487] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.553844] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.559293] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.564250] arm-smmu 12000000.iommu: stage 1 translation [ 2.569520] arm-smmu 12000000.iommu: stage 2 translation [ 2.575210] arm-smmu 12000000.iommu: nested translation [ 2.580630] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.587789] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.596622] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.600930] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.607478] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.614466] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.624106] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.627871] tegra_profiler: auth: init [ 2.631757] THERMAL EST: found 3 subdevs [ 2.635577] THERMAL EST num_resources: 0 [ 2.639157] [THERMAL EST subdev 0] [ 2.642737] [THERMAL EST subdev 1] [ 2.645918] [THERMAL EST subdev 2] [ 2.649138] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.655551] THERMAL EST: thz register success. [ 2.660107] THERMAL EST: end of probe, return err: 0 [ 2.665091] nvsciipc: loaded module [ 2.671591] tun: Universal TUN/TAP device driver, 1.6 [ 2.674885] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.681170] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.686490] e1000e: Intel(R) PRO/1000 Network Driver [ 2.691652] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.697758] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.702766] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.709242] PPP generic driver version 2.4.2 [ 2.713514] PPP BSD Compression module registered [ 2.718013] PPP Deflate Compression module registered [ 2.723250] PPP MPPE Compression module registered [ 2.728263] usbcore: registered new interface driver r8152 [ 2.733770] usbcore: registered new interface driver asix [ 2.738840] usbcore: registered new interface driver ax88179_178a [ 2.744960] usbcore: registered new interface driver cdc_ether [ 2.750909] usbcore: registered new interface driver net1080 [ 2.756778] usbcore: registered new interface driver cdc_subset [ 2.762810] usbcore: registered new interface driver zaurus [ 2.768504] usbcore: registered new interface driver cdc_ncm [ 2.774182] usbcore: registered new interface driver aqc111 [ 2.779823] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.785918] ohci-pci: OHCI PCI platform driver [ 2.789948] ohci-platform: OHCI generic platform driver [ 2.795584] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.802084] usbcore: registered new interface driver uas [ 2.806248] usbcore: registered new interface driver usb-storage [ 2.812575] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.818191] mousedev: PS/2 mouse device common for all mice [ 2.823667] usbcore: registered new interface driver xpad [ 2.831427] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.834424] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.842181] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.848422] i2c /dev entries driver [ 2.852002] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.857715] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.862850] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.868534] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.873614] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.879364] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.884499] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.896604] device-mapper: uevent: version 1.0.3 [ 2.897008] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.904865] cpuidle: Initializing cpuidle driver [ 2.908670] sdhci: Secure Digital Host Controller Interface driver [ 2.913742] sdhci: Copyright(c) Pierre Ossman [ 2.917849] Synopsys Designware Multimedia Card Interface Driver [ 2.923998] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.930215] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.930883] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.943340] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.960430] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.969282] vdd-1v0: supplied by regulator-dummy [ 2.974646] vdd-1v8-hs: supplied by regulator-dummy [ 2.979261] vdd-1v8-ls: supplied by regulator-dummy [ 2.983933] vdd-1v8-ao: supplied by regulator-dummy [ 2.987633] vddio-ddr-1v1: supplied by regulator-dummy [ 2.991941] vdd-rtc: supplied by regulator-dummy [ 2.993527] spmic-ldo1: supplied by regulator-dummy [ 2.994679] vdd-ao-3v3: supplied by regulator-dummy [ 3.000648] vddio-emmc-3v3: supplied by regulator-dummy [ 3.006742] spmic-ldo4: supplied by regulator-dummy [ 3.007835] vdd-usb-3v3: supplied by regulator-dummy [ 3.015093] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.021253] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.026587] spmic-ldo8: supplied by vdd-1v8-ls [ 3.027978] gpio-510 (gpio_default): hogged as output/high [ 3.030261] gpio-511 (gpio_default): hogged as output/high [ 3.037219] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.175671] max77686-rtc max77620-rtc: registered as rtc0 [ 3.177089] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.177451] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.871166] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.872272] hid: raw HID events driver (C) Jiri Kosina [ 3.873003] usbcore: registered new interface driver usbhid [ 3.873164] usbhid: USB HID core driver [ 3.875131] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.876484] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.853062] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.927899] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.646 ms) ÿá[ 3.961025] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.961694] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.962826] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.963741] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.966313] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.967090] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.967640] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.969335] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.969726] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.971687] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.977661] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.983716] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.988808] tegra186-aondbg aondbg: aondbg driver probe() OK [ 3.995293] denver_knobs_init:MTS_VERSION:55637613 [ 4.007480] t19x_cache tegra-cache: probed [ 4.009998] optee: probing for conduit method. [ 4.010775] optee: revision 3.16 (65cc2218) [ 4.011672] optee: dynamic shared memory is enabled [ 4.016310] optee: initialized driver [ 4.022246] nvpmodel: initialized successfully [ 4.023814] tegra_hv: get_hvd: not initialized yet [ 4.028563] user_ivc_mempool: hypervisor not present [ 4.034055] usbcore: registered new interface driver snd-usb-audio [ 4.040676] u32 classifier [ 4.041977] input device check on [ 4.046009] Actions configured [ 4.049332] Initializing XFRM netlink socket [ 4.054164] NET: Registered protocol family 10 [ 4.060285] Segment Routing with IPv6 [ 4.061553] NET: Registered protocol family 17 [ 4.066119] NET: Registered protocol family 15 [ 4.070246] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.083775] Bluetooth: RFCOMM socket layer initialized [ 4.088925] Bluetooth: RFCOMM ver 1.11 [ 4.092480] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.098266] Bluetooth: HIDP socket layer initialized [ 4.104631] 9pnet: Installing 9P2000 support [ 4.107662] Key type dns_resolver registered [ 4.113245] registered taskstats version 1 [ 4.116440] Loading compiled-in X.509 certificates [ 4.128473] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.131792] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.141905] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.144053] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.152942] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.161347] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.276179] tegra194-pcie 14160000.pcie: Link up [ 4.278967] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.279223] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.279394] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.279650] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.279860] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.280391] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.280826] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.290587] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.291077] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.291578] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.293257] pci 0004:01:00.0: supports D1 D2 [ 4.293451] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.302141] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.302508] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.302838] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.303229] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.303475] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.304732] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.310786] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.318182] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.326682] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.337221] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.341990] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.347391] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.354063] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.362230] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.364615] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.373326] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.381839] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.484287] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.484843] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.485059] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.485215] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.485532] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.485734] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.486118] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.486556] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.506775] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.507272] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.509729] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.511193] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.512806] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.514468] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.515502] pci 0005:00:00.0: Removing from iommu group 7 [ 5.515824] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.551129] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.572981] host1x 13e10000.host1x: initialized [ 5.574480] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.575259] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.576503] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.577102] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.578108] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.578655] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.579560] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.580283] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.581065] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.584204] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.594407] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.601504] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.611551] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.618278] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.628672] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.635467] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.645294] falcon 15340000.vic: Adding to iommu group 17 [ 5.659433] falcon 15340000.vic: initialized [ 5.660647] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.665995] falcon 15380000.nvjpg: initialized [ 5.666816] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.678323] falcon 154c0000.nvenc: initialized [ 5.678879] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.687948] falcon 15a80000.nvenc1: initialized [ 5.688531] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.699761] nvdec 15480000.nvdec: initialized [ 5.700388] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.709412] nvdec 15140000.nvdec1: initialized [ 5.709994] tsec 15500000.tsec: Adding to iommu group 18 [ 5.716458] tsec 15500000.tsec: initialized [ 5.716979] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.725237] tsec 15100000.tsecb: initialized [ 5.728879] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.753471] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.763949] gpio-374 (wifi-enable): hogged as output/high [ 5.764392] gpio-431 (camera-control-output-low): hogged as output/low [ 5.764685] gpio-432 (camera-control-output-low): hogged as output/low [ 5.766271] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.767712] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.769735] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.776718] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.781935] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.787710] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.793516] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.801901] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.808873] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.820679] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.825584] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.831491] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.840419] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.849616] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.857030] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.864586] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.870490] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.880410] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.886380] pva 16000000.pva0: Adding to iommu group 22 [ 5.912610] pva 16000000.pva0: initialized [ 5.917355] pva 16800000.pva1: Adding to iommu group 23 [ 5.928483] pva 16800000.pva1: initialized [ 5.932993] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.945499] nvdla 15880000.nvdla0: initialized [ 5.946672] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.955683] nvdla 158c0000.nvdla1: initialized [ 5.958744] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.958752] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.958771] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.959077] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.959819] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.959867] tegradccommon 15200000.display-hub: dma mapping done [ 5.959972] tegradc 15200000.display: Adding to iommu group 26 [ 5.961353] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 5.969838] tegradc 15210000.display: Adding to iommu group 26 [ 5.970190] tegradc 15200000.display: disp0 connected to head0->sor1 [ 5.970258] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 5.970271] tegra_cec 3960000.tegra_cec: probed [ 5.971089] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 5.973285] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 5.973649] kfuse 3830000.kfuse: initialized [ 5.974106] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 5.974111] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 5.974555] serial-tegra 3100000.serial: Adding to iommu group 2 [ 5.975195] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 5.976600] serial-tegra 3110000.serial: Adding to iommu group 2 [ 5.982485] generic_infoframe_type: 0x87 [ 5.989462] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 5.994492] tegradc 15200000.display: DT parsed successfully [ 6.000291] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.004580] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.011886] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.049530] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.065788] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.067316] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.067339] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.073409] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.098745] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.108501] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.116333] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.130192] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.136834] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.161543] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.170052] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.183509] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.184286] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.191978] tegradc 15210000.display: disp0 connected to head1->sor [ 6.197980] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.197991] usb usb1: Product: xHCI Host Controller [ 6.197996] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.198000] usb usb1: SerialNumber: 3610000.xhci [ 6.199405] hub 1-0:1.0: USB hub found [ 6.205045] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.211960] hub 1-0:1.0: 4 ports detected [ 6.216683] tegradc 15210000.display: DT parsed successfully [ 6.223808] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.227692] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.231318] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.269384] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.277204] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.284714] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.292101] usb usb2: Product: xHCI Host Controller [ 6.296990] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.303106] usb usb2: SerialNumber: 3610000.xhci [ 6.308998] hub 2-0:1.0: USB hub found [ 6.311689] hub 2-0:1.0: 4 ports detected [ 6.352651] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.358607] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.360081] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.360416] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.374216] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.375314] tegra194-cpufreq ccplex: probed with BWMGR [ 6.376674] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.377428] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.377930] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.379230] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.386388] mmc0: CQHCI version 5.10 [ 6.389108] tegra194-vi5 15c10000.vi: initialized [ 6.390374] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.391517] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.395535] generic_infoframe_type: 0x87 [ 6.402108] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.405974] tegradc 15200000.display: DT parsed successfully [ 6.413876] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.419638] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.426197] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.440780] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.447324] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.454295] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.460194] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.462064] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.468419] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.476551] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.483520] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.491914] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.504072] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.504555] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.520077] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.520320] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.530748] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.544431] nvethernet 2490000.ethernet: Macsec not supported [ 6.544460] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.559655] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.561249] tegradc 15200000.display: probed [ 6.566646] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.575648] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.583365] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.591365] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.597679] tegra-se-nvhost 15810000.se: initialized [ 6.606334] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.607499] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.613935] tegra-se-nvhost 15820000.se: initialized [ 6.619934] mmc0: Command Queue Engine enabled [ 6.620071] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.622915] mmc0: periodic cache flush enabled [ 6.622932] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.629629] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.634025] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.640281] tegra-se-nvhost 15830000.se: initialized [ 6.644172] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.646262] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.651925] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.667021] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.670166] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.690381] Console: switching to colour frame buffer device 240x67 [ 6.695930] tegradc 15200000.display: fb registered [ 6.701274] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.701305] tegra-se-nvhost 15840000.se: initialized [ 6.707650] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.713383] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.717409] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.724978] tegra_actmon d230000.actmon: in actmon_register()... [ 6.735877] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.741350] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.749855] hvc_sysfs: hypervisor is not present [ 6.783568] ALSA device list: [ 6.783717] No soundcards found. [ 6.791783] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.793135] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.793342] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.794414] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.794625] Extcon AUX1(HDMI) enable [ 6.795819] tegradc 15210000.display: disp1 connected to head1->sor [ 6.802221] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.809191] tegradc 15210000.display: DT parsed successfully [ 6.811570] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.815196] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.823221] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.831493] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.838337] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.844808] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.851475] tegradc 15210000.display: probed [ 6.855743] usb 1-2: Manufacturer: Generic [ 6.857827] hub 1-2:1.0: USB hub found [ 6.867926] tegradc 15210000.display: fb registered [ 6.869097] hub 1-2:1.0: 4 ports detected [ 6.876286] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.878582] Freeing unused kernel memory: 3968K [ 6.884648] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.897059] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.902131] tegradc 15210000.display: blank - powerdown [ 6.907217] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.915339] Extcon DP: HPD disabled [ 6.919012] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.925842] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.931551] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.931656] tegradc 15200000.display: blank - powerdown [ 6.933035] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.936339] Run /init as init process [ 6.969574] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.969580] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.969601] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.969605] usb 2-3: Manufacturer: Generic [ 6.975445] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.975450] Extcon AUX1(HDMI) disable [ 6.976202] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 6.976207] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 6.980179] hub 2-3:1.0: USB hub found [ 6.981971] hub 2-3:1.0: 4 ports detected [ 6.998818] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.999696] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.010762] tegradc 15200000.display: unblank [ 7.011808] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.011998] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.017977] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.019933] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.024056] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.024060] Extcon AUX1(HDMI) enable [ 7.036701] tegradc 15200000.display: sync windows ret = 246 [ 7.084698] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.091847] Extcon HDMI: HPD enabled [ 7.095491] tegradc 15200000.display: hdmi: plugged [ 7.136736] Root device found: mmcblk0p1 [ 7.140193] Found dev node: /dev/mmcblk0p1 [ 7.152215] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.177233] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.182628] Rootfs mounted over mmcblk0p1 [ 7.218716] Switching from initrd to actual rootfs [ 7.301459] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.302951] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.304346] usb 1-3: Product: Bluetooth Radio [ 7.305635] usb 1-3: Manufacturer: Realtek [ 7.306910] usb 1-3: SerialNumber: 00e04c000001 [ 7.370299] systemd[1]: System time before build time, advancing clock. [ 7.442381] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.447641] systemd[1]: Detected architecture arm64. [ 7.498412] systemd[1]: Set hostname to . [ 7.664433] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.018838] random: systemd: uninitialized urandom read (16 bytes read) [ 8.020690] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.022373] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.028458] systemd[1]: Created slice system-modprobe.slice. [ 8.031928] random: systemd: uninitialized urandom read (16 bytes read) [ 8.034723] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.037993] random: systemd: uninitialized urandom read (16 bytes read) [ 8.040920] systemd[1]: Created slice User and Session Slice. [ 8.044700] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.049057] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.052597] systemd[1]: Reached target User and Group Name Lookups. [ 8.055858] systemd[1]: Reached target Slices. [ 8.059092] systemd[1]: Reached target Swap. [ 8.063255] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.066990] systemd[1]: Listening on Syslog Socket. [ 8.070565] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.074028] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.079099] systemd[1]: Listening on Journal Audit Socket. [ 8.084367] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.088276] systemd[1]: Listening on Journal Socket. [ 8.092275] systemd[1]: Listening on udev Control Socket. [ 8.095849] systemd[1]: Listening on udev Kernel Socket. [ 8.104685] systemd[1]: Mounting Huge Pages File System... [ 8.113291] systemd[1]: Mounting POSIX Message Queue File System... [ 8.121725] systemd[1]: Mounting RPC Pipe File System... [ 8.130822] systemd[1]: Mounting Kernel Debug File System... [ 8.139417] systemd[1]: Mounting Kernel Trace File System... [ 8.149611] systemd[1]: Starting Journal Service... [ 8.158718] systemd[1]: Starting Set the console keyboard layout... [ 8.167182] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.170827] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.177434] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.185726] systemd[1]: Started Nameserver information manager. [ 8.190410] systemd[1]: Reached target Network (Pre). [ 8.197187] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.197400] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.204440] systemd[1]: Starting Load Kernel Modules... [ 8.214490] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.222958] systemd[1]: Starting udev Coldplug all Devices... [ 8.234311] systemd[1]: Mounted Huge Pages File System. [ 8.238305] systemd[1]: Mounted POSIX Message Queue File System. [ 8.245417] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.245862] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.245868] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.245877] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.245881] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.246043] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.246237] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.246374] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.246388] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.247800] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.268657] systemd[1]: Mounted RPC Pipe File System. [ 8.272745] systemd[1]: Mounted Kernel Debug File System. [ 8.278127] systemd[1]: Mounted Kernel Trace File System. [ 8.286368] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.292873] systemd[1]: nvfb-udev.service: Succeeded. [ 8.298416] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.310798] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.323957] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.325809] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.333165] systemd[1]: Starting Load/Save Random Seed... [ 8.338855] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.338855] [ 8.342254] systemd[1]: Starting Create System Users... [ 8.380332] systemd[1]: Finished Load Kernel Modules. [ 8.386016] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.392891] systemd[1]: Mounting Kernel Configuration File System... [ 8.400925] systemd[1]: Started OP-TEE Client Supplicant. [ 8.410535] systemd[1]: Starting Apply Kernel Variables... [ 8.418144] systemd[1]: Mounted Kernel Configuration File System. [ 8.430641] systemd[1]: Finished Create System Users. [ 8.438072] systemd[1]: Finished Set the console keyboard layout. [ 8.446610] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.830263] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.838705] imx219 9-0010: board setup failed [ 9.840443] imx219: probe of 9-0010 failed with error -121 [ 9.848176] random: crng init done [ 9.849542] random: 7 urandom warning(s) missed due to ratelimiting [ 9.858333] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.864941] imx219 10-0010: board setup failed [ 9.866373] imx219: probe of 10-0010 failed with error -121 [ 9.940356] hot-surface-alert cooling state: 0 -> 1 [ 11.189930] using random self ethernet address [ 11.189938] using random host ethernet address [ 11.445508] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.447232] Creating 1 MTD partitions on "spi6.0": [ 11.447244] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.318245] using random self ethernet address [ 12.319979] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.836413] nvidia: loading out-of-tree module taints kernel. [ 59.834201] watchdog: watchdog0: watchdog did not stop! [ 60.329628] Trying to unregister non-registered hwtime source [ 63.395217] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.396749] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ÿÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.591] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23:ÿâdmce initialized cvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.211] I> Welcome to NVDisp-Init [0003.211] I> NVDisp-Init version: t194-f9ecfedc [0003.212] I> CPU-BL Params @ 0xca020000 [0003.212] I> 0) Base:0x00000000 Size:0x00000000 [0003.212] I> 1) Base:0xc8300000 Size:0x00100000 [0003.212] I> 2) Base:0xc9800000 Size:0x00200000 [0003.213] I> 3) Base:0xc8600000 Size:0x00200000 [0003.215] I> 4) Base:0xc8200000 Size:0x00100000 [0003.220] I> 5) Base:0xc8100000 Size:0x00100000 [0003.224] I> 6) Base:0xc9400000 Size:0x00400000 [0003.229] I> 7) Base:0xc9000000 Size:0x00400000 [0003.233] I> 8) Base:0xc8000000 Size:0x00100000 [0003.238] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.242] I> 10) Base:0xca800000 Size:0x00800000 [0003.247] I> 11) Base:0x40000000 Size:0x00040000 [0003.251] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.255] I> 13) Base:0x40046000 Size:0x00002000 [0003.260] I> 14) Base:0x40048000 Size:0x00002000 [0003.264] I> 15) Base:0xaf000000 Size:0x00004000 [0003.269] I> 16) Base:0x4004a000 Size:0x00002000 [0003.273] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.278] I> 18) Base:0x4004c000 Size:0x00002000 [0003.282] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.287] I> 20) Base:0x4004e000 Size:0x00002000 [0003.291] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.296] I> 22) Base:0x00000000 Size:0x00000000 [0003.300] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.305] I> 24) Base:0xcc000000 Size:0x02000000 [0003.309] I> 25) Base:0x40050000 Size:0x00002000 [0003.313] I> 26) Base:0x40040000 Size:0x00006000 [0003.318] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.322] I> 28) Base:0xc8400000 Size:0x00200000 [0003.327] I> 29) Base:0xc8800000 Size:0x00400000 [0003.331] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.336] I> 31) Base:0x00000000 Size:0x00000000 [0003.340] I> 32) Base:0xf8000000 Size:0x08000000 [0003.345] I> 33) Base:0xce000000 Size:0x2a000000 [0003.349] I> 34) Base:0xcb000000 Size:0x01000000 [0003.354] I> 35) Base:0xae000000 Size:0x01000000 [0003.358] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.363] I> 37) Base:0xca000000 Size:0x00800000 [0003.367] I> 38) Base:0x80000000 Size:0x20000000 [0003.371] I> 39) Base:0xb0000000 Size:0x08000000 [0003.376] I> 40) Base:0x00000000 Size:0x00000000 [0003.380] I> 41) Base:0x00000000 Size:0x00000000 [0003.385] I> 42) Base:0x00000000 Size:0x00000000 [0003.389] I> 43) Base:0x00000000 Size:0x00000000 [0003.394] I> 44) Base:0x00000000 Size:0x00000000 [0003.398] I> 45) Base:0x00000000 Size:0x00000000 [0003.403] GIC-SPI Target CPU: 0 [0003.406] Interrupts Init done [0003.409] calling constructors [0003.411] initializing heap [0003.414] I> Heap: [0xa0960000 ... 0xadf00000] [0003.418] initializing threads [0003.421] initializing timers [0003.424] creating bootstrap completion thread [0003.428] top of bootstrap2() [0003.431] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.436] initializing platform [0003.439] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.444] W> device prod register failed [0003.448] I> Bl_dtb @0xadf00000 [0003.451] I> gpio framework initialized [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.469] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.473] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.495] I> Boot_device: QSPI_FLASH instance: 0 [0003.500] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.510] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.517] I> QSPI source rate = 204000 Khz [0003.521] I> Requested rate for QSPI clock = 34000 Khz [0003.526] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.531] I> tx_clk_tap_delay : 0 [0003.533] I> rx_clk_tap_delay : 16 [0003.537] I> QSPI Flash Size = 32 MB [0003.545] I> Qspi initialized successfully [0003.545] I> qspi flash-0 params source = boot args [0003.549] W> No board IDs available [0003.552] E> Failed to get board id info! [0003.558] I> sdmmc-3 params source = safe params [0003.565] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.566] W> Cannot find any partition table for 00000003 [0003.571] E> Failed to publish 00000003 [0003.576] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.607] I> regulator 'vdd-hdmi-5v0' already enabled [0003.608] I> hdmi cable connected [0003.615] W> set volts not configured for 'vdd-1v0' [0003.621] W> set volts not configured for 'vdd-1v8-hs' [0003.621] I> retrieved tmds range from prod_list_hdmi_soc [0003.627] E> invalid display type [0003.628] E> cannot find any other nvdisp nodes [0003.645] I> edid read success [0003.657] I> edid read success [0003.658] I> width = 640, height = 480, frequency = 25174825 [0003.658] I> width = 1920, height = 1080, frequency = 148500000 [0003.658] I> width = 1280, height = 768, frequency = 79500000 [0003.659] I> width = 1360, height = 768, frequency = 85500000 [0003.659] I> width = 720, height = 480, frequency = 26973026 [0003.663] I> width = 720, height = 576, frequency = 26973026 [0003.669] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1280, height = 720, frequency = 74175824 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.686] I> width = 1920, height = 1080, frequency = 148351648 [0003.692] I> width = 720, height = 480, frequency = 26973026 [0003.697] I> width = 720, height = 576, frequency = 26973026 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 3840, height = 2160, frequency = 296703296 [0003.726] I> width = 4096, height = 2160, frequency = 296703296 [0003.731] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.743] I> hdmi_enable, starting HDMI initialisation [0003.748] I> hdmi_enable, HDMI initialisation complete [0003.757] initializing target [0003.758] calling apps_init() [0003.759] starting app kernel_boot_app [0003.760] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000720] Console: colour dummy device 80x25 [ 0.002250] printk: console [tty0] enabled [ 0.002313] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002352] pid_max: default: 32768 minimum: 301 [ 0.002545] LSM: Security Framework initializing [ 0.002603] Yama: becoming mindful. [ 0.002669] SELinux: Initializing. [ 0.002856] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002895] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005846] rcu: Hierarchical SRCU implementation. [ 0.006143] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006808] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006857] DTB Build time: Aug 10 2022 20:31:49 [ 0.009587] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009881] Remapping and enabling EFI services. [ 0.011862] smp: Bringing up secondary CPUs ... [ 0.042554] Detected PIPT I-cache on CPU1 [ 0.042665] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072209] Detected PIPT I-cache on CPU2 [ 0.072365] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102006] Detected PIPT I-cache on CPU3 [ 0.102106] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131853] Detected PIPT I-cache on CPU4 [ 0.132030] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161784] Detected PIPT I-cache on CPU5 [ 0.161937] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162439] smp: Brought up 1 node, 6 CPUs [ 0.162648] SMP: Total of 6 processors activated. [ 0.162738] CPU features: detected: Privileged Access Never [ 0.162779] CPU features: detected: LSE atomic instructions [ 0.162793] CPU features: detected: User Access Override [ 0.162807] CPU features: detected: 32-bit EL0 Support [ 0.162821] CPU features: detected: RAS Extension Support [ 0.162835] CPU features: detected: CRC32 instructions [ 0.162849] CPU features: detected: 32-bit EL1 Support [ 0.231567] CPU: All CPU(s) started at EL2 [ 0.237911] devtmpfs: initialized [ 0.306611] Registered cp15_barrier emulation handler [ 0.306744] Registered setend emulation handler [ 0.306831] KASLR enabled [ 0.307181] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.307256] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.309961] pinctrl core: initialized pinctrl subsystem [ 0.311028] SMBIOS 3.0.0 present. [ 0.311074] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.311904] NET: Registered protocol family 16 [ 0.314870] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.315656] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.316675] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.316760] audit: initializing netlink subsys (disabled) [ 0.317126] audit: type=2000 audit(0.312:1): state=initialized audit_enabled=0 res=1 [ 0.317693] thermal_sys: Registered thermal governor 'step_wise' [ 0.317706] thermal_sys: Registered thermal governor 'power_allocator' [ 0.317744] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.321309] cpuidle: using governor menu [ 0.321898] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.322322] ASID allocator initialised with 32768 entries [ 0.322634] Serial: AMBA PL011 UART driver [ 0.326630] Tegra reboot handler registered. [ 0.394128] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.394251] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.394433] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.394484] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.394621] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.394670] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.394794] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.394842] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.394984] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.395035] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.397108] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.397149] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.397202] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.397229] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.397273] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.397306] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.397332] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.397356] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.397380] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.397403] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.397426] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.397450] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.397473] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.397513] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.397537] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.397580] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.397620] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.397720] mc-err: mcerr ops are set to t19x [ 0.408797] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.408843] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.408860] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.408873] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.415172] ACPI: Interpreter disabled. [ 0.416313] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.417467] iommu: Default domain type: Translated [ 0.417528] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.417875] SCSI subsystem initialized [ 0.418061] usbcore: registered new interface driver usbfs [ 0.418124] usbcore: registered new interface driver hub [ 0.418158] usbcore: registered new device driver usb [ 0.418559] mc: Linux media interface: v0.10 [ 0.418590] videodev: Linux video capture interface: v2.00 [ 0.418887] pps_core: LinuxPPS API ver. 1 registered [ 0.418899] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.418924] PTP clock support registered [ 0.419144] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.419434] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.419491] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.420127] Registered efivars operations [ 0.425007] FPGA manager framework [ 0.425113] Advanced Linux Sound Architecture Driver Initialized. [ 0.425756] Bluetooth: Core ver 2.22 [ 0.425793] NET: Registered protocol family 31 [ 0.425804] Bluetooth: HCI device and connection manager initialized [ 0.425819] Bluetooth: HCI socket layer initialized [ 0.425831] Bluetooth: L2CAP socket layer initialized [ 0.425850] Bluetooth: SCO socket layer initialized [ 0.427134] camchar: rtcpu character device driver loaded [ 0.427837] clocksource: Switched to clocksource arch_sys_counter [ 0.711723] VFS: Disk quotas dquot_6.6.0 [ 0.711819] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.712154] pnp: PnP ACPI: disabled [ 0.722439] la/ptsa driver initialized. [ 0.722547] NET: Registered protocol family 2 [ 0.722706] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.727326] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.727395] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.727709] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.728163] TCP: Hash tables configured (established 65536 bind 65536) [ 0.728277] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.728366] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.728560] NET: Registered protocol family 1 [ 0.729442] RPC: Registered named UNIX socket transport module. [ 0.729473] RPC: Registered udp transport module. [ 0.729488] RPC: Registered tcp transport module. [ 0.729502] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.729525] PCI: CLS 0 bytes, default 64 [ 0.729850] Trying to unpack rootfs image as initramfs... [ 0.999618] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.002759] Freeing initrd memory: 8196K [ 1.007524] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.007557] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.007591] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.008016] kvm [1]: IPA Size Limit: 40 bits [ 1.008649] kvm [1]: vgic interrupt IRQ9 [ 1.009327] kvm [1]: VHE mode initialized successfully [ 1.010949] Initialise system trusted keyrings [ 1.011299] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.018035] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.019034] NFS: Registering the id_resolver key type [ 1.019074] Key type id_resolver registered [ 1.019089] Key type id_legacy registered [ 1.019221] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.019247] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.019284] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.029921] NET: Registered protocol family 38 [ 1.029946] Key type asymmetric registered [ 1.029961] Asymmetric key parser 'x509' registered [ 1.030012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.030285] io scheduler mq-deadline registered [ 1.030303] io scheduler kyber registered [ 1.036670] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.039978] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.040068] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.040145] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.040215] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.040283] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.046308] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.046321] scrncapt: init (heads:4 wins:6 planes:4) [ 1.047502] EINJ: ACPI disabled. [ 1.051011] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.051035] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.051050] tegra-pmc: ### PMC reset level: L1 [ 1.051063] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.051114] tegra-pmc: PMC Prod config success [ 1.056668] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.077163] random: fast init done [ 1.085029] printk: console [ttyTCU0] enabled [ 2.614458] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.618542] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.623196] arm-smmu 10000000.iommu: stage 1 translation [ 2.628867] arm-smmu 10000000.iommu: stage 2 translation [ 2.634070] arm-smmu 10000000.iommu: nested translation [ 2.639682] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.646594] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.658783] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.659687] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.666529] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.674170] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.679311] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.684301] arm-smmu 12000000.iommu: stage 1 translation [ 2.689545] arm-smmu 12000000.iommu: stage 2 translation [ 2.694971] arm-smmu 12000000.iommu: nested translation [ 2.700653] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.707831] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.719498] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.720696] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.727516] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.734760] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.744762] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.747988] tegra_profiler: auth: init [ 2.751973] THERMAL EST: found 3 subdevs [ 2.755578] THERMAL EST num_resources: 0 [ 2.759199] [THERMAL EST subdev 0] [ 2.762807] [THERMAL EST subdev 1] [ 2.765931] [THERMAL EST subdev 2] [ 2.769436] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.775635] THERMAL EST: thz register success. [ 2.780137] THERMAL EST: end of probe, return err: 0 [ 2.785484] nvsciipc: loaded module [ 2.792814] tun: Universal TUN/TAP device driver, 1.6 [ 2.794935] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.801201] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.806525] e1000e: Intel(R) PRO/1000 Network Driver [ 2.811689] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.817513] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.823063] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.829260] PPP generic driver version 2.4.2 [ 2.833297] PPP BSD Compression module registered [ 2.838064] PPP Deflate Compression module registered [ 2.843288] PPP MPPE Compression module registered [ 2.848329] usbcore: registered new interface driver r8152 [ 2.853835] usbcore: registered new interface driver asix [ 2.859173] usbcore: registered new interface driver ax88179_178a [ 2.865305] usbcore: registered new interface driver cdc_ether [ 2.871218] usbcore: registered new interface driver net1080 [ 2.876816] usbcore: registered new interface driver cdc_subset [ 2.882614] usbcore: registered new interface driver zaurus [ 2.888312] usbcore: registered new interface driver cdc_ncm [ 2.893973] usbcore: registered new interface driver aqc111 [ 2.899939] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.905720] ohci-pci: OHCI PCI platform driver [ 2.910251] ohci-platform: OHCI generic platform driver [ 2.915958] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.922463] usbcore: registered new interface driver uas [ 2.926563] usbcore: registered new interface driver usb-storage [ 2.932441] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.938788] mousedev: PS/2 mouse device common for all mice [ 2.943493] usbcore: registered new interface driver xpad [ 2.951513] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.954502] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.961986] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.968529] i2c /dev entries driver [ 2.972141] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.977741] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.983478] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.988633] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.993776] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.999225] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.004667] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.017192] device-mapper: uevent: version 1.0.3 [ 3.017710] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.025105] cpuidle: Initializing cpuidle driver [ 3.028993] sdhci: Secure Digital Host Controller Interface driver [ 3.034071] sdhci: Copyright(c) Pierre Ossman [ 3.037893] Synopsys Designware Multimedia Card Interface Driver [ 3.044081] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.049999] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.050553] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.063236] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.081998] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.091443] vdd-1v0: supplied by regulator-dummy [ 3.096912] vdd-1v8-hs: supplied by regulator-dummy [ 3.101726] vdd-1v8-ls: supplied by regulator-dummy [ 3.106512] vdd-1v8-ao: supplied by regulator-dummy [ 3.110362] vddio-ddr-1v1: supplied by regulator-dummy [ 3.114796] vdd-rtc: supplied by regulator-dummy [ 3.116571] spmic-ldo1: supplied by regulator-dummy [ 3.117706] vdd-ao-3v3: supplied by regulator-dummy [ 3.123817] vddio-emmc-3v3: supplied by regulator-dummy [ 3.130009] spmic-ldo4: supplied by regulator-dummy [ 3.131185] vdd-usb-3v3: supplied by regulator-dummy [ 3.137234] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.143414] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.148920] spmic-ldo8: supplied by vdd-1v8-ls [ 3.150357] gpio-510 (gpio_default): hogged as output/high [ 3.151619] gpio-511 (gpio_default): hogged as output/high [ 3.157097] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.295685] max77686-rtc max77620-rtc: registered as rtc0 [ 3.296720] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.297016] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.018594] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.019905] hid: raw HID events driver (C) Jiri Kosina [ 4.020626] usbcore: registered new interface driver usbhid [ 4.020784] usbhid: USB HID core driver [ 4.022564] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.023858] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.880388] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.955210] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.632 ms) ÿá[ 4.108737] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.109490] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.110646] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.111392] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.113408] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.114113] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.114723] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.117141] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.117372] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.119665] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.119916] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.125482] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.132267] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.139087] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.146098] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.158894] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.165697] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.170358] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.177727] denver_knobs_init:MTS_VERSION:55637613 [ 4.190202] t19x_cache tegra-cache: probed [ 4.193494] optee: probing for conduit method. [ 4.194455] optee: revision 3.16 (65cc2218) [ 4.195936] optee: dynamic shared memory is enabled [ 4.197512] optee: initialized driver [ 4.203923] nvpmodel: initialized successfully [ 4.204856] tegra_hv: get_hvd: not initialized yet [ 4.209657] user_ivc_mempool: hypervisor not present [ 4.216306] usbcore: registered new interface driver snd-usb-audio [ 4.222913] u32 classifier [ 4.223871] input device check on [ 4.227461] Actions configured [ 4.230936] Initializing XFRM netlink socket [ 4.236045] NET: Registered protocol family 10 [ 4.243219] Segment Routing with IPv6 [ 4.243478] NET: Registered protocol family 17 [ 4.248179] NET: Registered protocol family 15 [ 4.252168] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.265807] Bluetooth: RFCOMM socket layer initialized [ 4.270132] Bluetooth: RFCOMM ver 1.11 [ 4.274266] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.280099] Bluetooth: HIDP socket layer initialized [ 4.285781] 9pnet: Installing 9P2000 support [ 4.289561] Key type dns_resolver registered [ 4.294739] registered taskstats version 1 [ 4.297996] Loading compiled-in X.509 certificates [ 4.311311] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.313691] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.324537] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.325697] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.334720] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.342767] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.460044] tegra194-pcie 14160000.pcie: Link up [ 4.463076] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.463331] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.463559] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.463921] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.464120] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.464551] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.465053] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.480589] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.481194] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.481737] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.483270] pci 0004:01:00.0: supports D1 D2 [ 4.483453] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.492442] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.492850] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.493089] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.493567] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.493871] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.494059] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.494695] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.502466] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.511017] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.521059] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.525865] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.531948] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.537969] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.549151] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.549520] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.557477] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.565486] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.681106] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.681860] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.682088] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.682317] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.682561] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.682791] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.683155] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.683590] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.703427] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.704018] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.706364] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.708271] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.709919] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.711719] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.712769] pci 0005:00:00.0: Removing from iommu group 7 [ 5.713019] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.746104] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.769626] host1x 13e10000.host1x: initialized [ 5.771457] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.772865] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.774045] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.774935] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.776131] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.776856] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.777725] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.778414] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.779305] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.781508] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.791637] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.798292] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.808155] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.815108] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.824945] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.832095] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.842092] falcon 15340000.vic: Adding to iommu group 17 [ 5.856624] falcon 15340000.vic: initialized [ 5.857654] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.863051] falcon 15380000.nvjpg: initialized [ 5.863867] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.874818] falcon 154c0000.nvenc: initialized [ 5.875586] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.885584] falcon 15a80000.nvenc1: initialized [ 5.886447] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.899246] nvdec 15480000.nvdec: initialized [ 5.900208] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.910732] nvdec 15140000.nvdec1: initialized [ 5.911485] tsec 15500000.tsec: Adding to iommu group 18 [ 5.917290] tsec 15500000.tsec: initialized [ 5.917914] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.922584] tsec 15100000.tsecb: initialized [ 5.927043] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.951442] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.965283] gpio-374 (wifi-enable): hogged as output/high [ 5.965642] gpio-431 (camera-control-output-low): hogged as output/low [ 5.965928] gpio-432 (camera-control-output-low): hogged as output/low [ 5.967885] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.969326] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.969860] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.973407] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.979124] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.984547] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.990185] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.998445] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.005970] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.017280] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.022816] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.028283] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.037103] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.046714] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.054677] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.061507] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.067637] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.077433] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.083494] pva 16000000.pva0: Adding to iommu group 22 [ 6.110989] pva 16000000.pva0: initialized [ 6.117001] pva 16800000.pva1: Adding to iommu group 23 [ 6.128022] pva 16800000.pva1: initialized [ 6.132641] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.145433] nvdla 15880000.nvdla0: initialized [ 6.146916] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.156474] nvdla 158c0000.nvdla1: initialized [ 6.159627] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.160277] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.160783] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.161010] tegradc 15200000.display: Adding to iommu group 26 [ 6.161115] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.161662] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.161763] tegradccommon 15200000.display-hub: dma mapping done [ 6.163173] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.172132] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.172699] tegradc 15210000.display: Adding to iommu group 26 [ 6.173506] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.179983] generic_infoframe_type: 0x87 [ 6.185353] tegra_cec 3960000.tegra_cec: probed [ 6.191003] tegradc 15200000.display: DT parsed successfully [ 6.197075] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.199968] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.208221] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.226539] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.226700] kfuse 3830000.kfuse: initialized [ 6.233905] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.233990] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.239529] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.260922] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.261271] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.268596] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.273485] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.286205] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.286989] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.307592] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.311874] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.313252] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.321950] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.334091] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.334225] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.342985] tegradc 15210000.display: disp0 connected to head1->sor [ 6.355426] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.362483] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.362523] tegradc 15210000.display: DT parsed successfully [ 6.371926] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.377530] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.391063] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.399490] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.407671] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.414972] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.421845] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.429510] usb usb1: Product: xHCI Host Controller [ 6.434375] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.440262] usb usb1: SerialNumber: 3610000.xhci [ 6.446140] hub 1-0:1.0: USB hub found [ 6.448955] hub 1-0:1.0: 4 ports detected [ 6.453703] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.458669] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.466016] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.473739] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.481843] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.489066] usb usb2: Product: xHCI Host Controller [ 6.493786] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.499995] usb usb2: SerialNumber: 3610000.xhci [ 6.505810] hub 2-0:1.0: USB hub found [ 6.508736] hub 2-0:1.0: 4 ports detected [ 6.553078] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.559166] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.560571] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.560821] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.574009] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.575061] tegra194-cpufreq ccplex: probed with BWMGR [ 6.576408] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.577141] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.577703] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.578999] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.586499] tegra194-vi5 15c10000.vi: initialized [ 6.588108] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.588650] generic_infoframe_type: 0x87 [ 6.589617] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.593024] tegradc 15200000.display: DT parsed successfully [ 6.599019] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.604738] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.612792] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.612801] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.612806] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.612810] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.619835] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.620872] mmc0: CQHCI version 5.10 [ 6.621639] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.621647] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.621652] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.622038] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.622045] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.622272] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.623471] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.623476] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.625761] tegradc 15200000.display: probed [ 6.627260] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.663363] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.665456] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.745774] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.746139] Console: switching to colour frame buffer device 240x67 [ 6.747442] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.752317] tegradc 15200000.display: fb registered [ 6.760019] mmc0: Command Queue Engine enabled [ 6.760023] mmc0: periodic cache flush enabled [ 6.760039] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.766224] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.766603] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.766780] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.770765] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.776211] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.779723] nvethernet 2490000.ethernet: Macsec not supported [ 6.786794] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.793459] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.838881] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.843541] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.850646] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.854464] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.858239] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.867364] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.874059] tegra-se-nvhost 15810000.se: initialized [ 6.880346] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.880947] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.886849] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.892944] Extcon AUX1(HDMI) enable [ 6.893105] tegradc 15210000.display: disp1 connected to head1->sor [ 6.901068] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.906921] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.910790] tegra-se-nvhost 15820000.se: initialized [ 6.916765] tegradc 15210000.display: DT parsed successfully [ 6.919328] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.919334] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.919338] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.919342] usb 1-2: Manufacturer: Generic [ 6.921293] hub 1-2:1.0: USB hub found [ 6.922353] hub 1-2:1.0: 4 ports detected [ 6.924883] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.930173] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.935200] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.940487] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.949377] tegra-se-nvhost 15830000.se: initialized [ 6.956294] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.963455] tegradc 15210000.display: probed [ 6.966183] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.021614] tegradc 15210000.display: fb registered [ 7.022126] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.029724] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.039535] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.039546] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.039611] tegradc 15200000.display: blank - powerdown [ 7.039867] tegra-se-nvhost 15840000.se: initialized [ 7.041803] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.043346] tegra_actmon d230000.actmon: in actmon_register()... [ 7.043546] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.044006] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.044542] hvc_sysfs: hypervisor is not present [ 7.048820] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.072104] ALSA device list: [ 7.072111] No soundcards found. [ 7.085409] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.085416] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.085420] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.085424] usb 2-3: Manufacturer: Generic [ 7.088185] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.088190] Extcon AUX1(HDMI) disable [ 7.096167] hub 2-3:1.0: USB hub found [ 7.098095] hub 2-3:1.0: 4 ports detected [ 7.111565] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.112448] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.124613] tegradc 15200000.display: unblank [ 7.125650] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.125858] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.131676] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.133566] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.137572] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.137576] Extcon AUX1(HDMI) enable [ 7.150338] tegradc 15200000.display: sync windows ret = 247 [ 7.203867] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.207793] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.246096] tegradc 15210000.display: blank - powerdown [ 7.251606] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.251609] Extcon DP: HPD disabled [ 7.251630] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.251649] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.251714] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.282997] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.283013] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.284155] Freeing unused kernel memory: 3968K [ 7.284355] Run /init as init process [ 7.290430] Extcon HDMI: HPD enabled [ 7.290436] tegradc 15200000.display: hdmi: plugged [ 7.313706] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.365193] Root device found: mmcblk0p1 [ 7.368713] Found dev node: /dev/mmcblk0p1 [ 7.405046] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.405249] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.406395] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.406404] usb 1-3: Product: Bluetooth Radio [ 7.410361] usb 1-3: Manufacturer: Realtek [ 7.411592] usb 1-3: SerialNumber: 00e04c000001 [ 7.411708] Rootfs mounted over mmcblk0p1 [ 7.450430] Switching from initrd to actual rootfs [ 7.601387] systemd[1]: System time before build time, advancing clock. [ 7.672089] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.676799] systemd[1]: Detected architecture arm64. [ 7.716383] systemd[1]: Set hostname to . [ 7.878966] systemd-sysv-generator[249]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.190864] random: crng init done [ 8.253125] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.254807] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.260605] systemd[1]: Created slice system-modprobe.slice. [ 8.265375] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.269491] systemd[1]: Created slice User and Session Slice. [ 8.272924] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.277075] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.280366] systemd[1]: Reached target User and Group Name Lookups. [ 8.283470] systemd[1]: Reached target Slices. [ 8.286670] systemd[1]: Reached target Swap. [ 8.290723] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.294378] systemd[1]: Listening on Syslog Socket. [ 8.297932] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.301400] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.305751] systemd[1]: Listening on Journal Audit Socket. [ 8.309434] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.314811] systemd[1]: Listening on Journal Socket. [ 8.319875] systemd[1]: Listening on udev Control Socket. [ 8.323407] systemd[1]: Listening on udev Kernel Socket. [ 8.332236] systemd[1]: Mounting Huge Pages File System... [ 8.340840] systemd[1]: Mounting POSIX Message Queue File System... [ 8.349049] systemd[1]: Mounting RPC Pipe File System... [ 8.357848] systemd[1]: Mounting Kernel Debug File System... [ 8.366517] systemd[1]: Mounting Kernel Trace File System... [ 8.376581] systemd[1]: Starting Journal Service... [ 8.385365] systemd[1]: Starting Set the console keyboard layout... [ 8.393748] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.397402] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.403740] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.411853] systemd[1]: Started Nameserver information manager. [ 8.416824] systemd[1]: Reached target Network (Pre). [ 8.423865] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.425782] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.434020] systemd[1]: Starting Load Kernel Modules... [ 8.441673] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.450816] systemd[1]: Starting udev Coldplug all Devices... [ 8.460869] systemd[1]: Mounted Huge Pages File System. [ 8.464602] systemd[1]: Mounted POSIX Message Queue File System. [ 8.468268] systemd[1]: Mounted RPC Pipe File System. [ 8.471952] systemd[1]: Mounted Kernel Debug File System. [ 8.474413] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.474907] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.477724] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.477737] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.477742] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.478109] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.478169] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.478326] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.478336] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.488979] systemd[1]: Mounted Kernel Trace File System. [ 8.490075] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.504352] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.509338] systemd[1]: nvfb-udev.service: Succeeded. [ 8.513823] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.524071] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.538006] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.539840] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.548104] systemd[1]: Starting Load/Save Random Seed... [ 8.556409] systemd[1]: Starting Create System Users... [ 8.589385] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.589385] [ 8.609134] systemd[1]: Finished Load/Save Random Seed. [ 8.620375] systemd[1]: Finished Load Kernel Modules. [ 8.625108] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.631992] systemd[1]: Mounting Kernel Configuration File System... [ 8.639911] systemd[1]: Started OP-TEE Client Supplicant. [ 8.648428] systemd[1]: Starting Apply Kernel Variables... [ 8.658500] systemd[1]: Finished Set the console keyboard layout. [ 8.665531] systemd[1]: Finished Create System Users. [ 8.669725] systemd[1]: Mounted Kernel Configuration File System. [ 8.678513] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.152648] hot-surface-alert cooling state: 0 -> 1 [ 10.184307] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.190787] imx219 9-0010: board setup failed [ 10.192060] imx219: probe of 9-0010 failed with error -121 [ 10.204320] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.228477] imx219 10-0010: board setup failed [ 10.229766] imx219: probe of 10-0010 failed with error -121 [ 10.763418] using random self ethernet address [ 10.800937] using random host ethernet address [ 11.732118] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.732123] Creating 1 MTD partitions on "spi6.0": [ 11.732134] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.412207] using random self ethernet address [ 12.413860] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.865488] nvidia: loading out-of-tree module taints kernel. [ 58.222044] watchdog: watchdog0: watchdog did not stop! [ 58.669573] Trying to unregister non-registered hwtime source [ 61.734394] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.735955] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuratioÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿän might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.629] I> edid read success [0003.641] I> edid read success [0003.641] I> width = 640, height = 480, frequency = 25174825 [0003.642] I> width = 1920, height = 1080, frequency = 148500000 [0003.642] I> width = 1280, height = 768, frequency = 79500000 [0003.642] I> width = 1360, height = 768, frequency = 85500000 [0003.643] I> width = 720, height = 480, frequency = 26973026 [0003.647] I> width = 720, height = 576, frequency = 26973026 [0003.652] I> width = 1280, height = 720, frequency = 74175824 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1920, height = 1080, frequency = 148351648 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 720, height = 480, frequency = 26973026 [0003.681] I> width = 720, height = 576, frequency = 26973026 [0003.686] I> width = 3840, height = 2160, frequency = 296703296 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 4096, height = 2160, frequency = 296703296 [0003.715] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.726] I> hdmi_enable, starting HDMI initialisation [0003.731] I> hdmi_enable, HDMI initialisation complete [0003.741] initializing target [0003.742] calling apps_init() [0003.742] starting app kernel_boot_app [0003.743] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000667] Console: colour dummy device 80x25 [ 0.002201] printk: console [tty0] enabled [ 0.002264] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002300] pid_max: default: 32768 minimum: 301 [ 0.002487] LSM: Security Framework initializing [ 0.002546] Yama: becoming mindful. [ 0.002593] SELinux: Initializing. [ 0.002769] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002809] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005735] rcu: Hierarchical SRCU implementation. [ 0.005978] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006621] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006690] DTB Build time: Aug 10 2022 20:31:49 [ 0.009329] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009562] Remapping and enabling EFI services. [ 0.011507] smp: Bringing up secondary CPUs ... [ 0.041171] Detected PIPT I-cache on CPU1 [ 0.041269] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070715] Detected PIPT I-cache on CPU2 [ 0.070867] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100452] Detected PIPT I-cache on CPU3 [ 0.100542] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130164] Detected PIPT I-cache on CPU4 [ 0.130368] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.159954] Detected PIPT I-cache on CPU5 [ 0.160096] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160545] smp: Brought up 1 node, 6 CPUs [ 0.160764] SMP: Total of 6 processors activated. [ 0.160834] CPU features: detected: Privileged Access Never [ 0.160859] CPU features: detected: LSE atomic instructions [ 0.160893] CPU features: detected: User Access Override [ 0.160908] CPU features: detected: 32-bit EL0 Support [ 0.160958] CPU features: detected: RAS Extension Support [ 0.160974] CPU features: detected: CRC32 instructions [ 0.160989] CPU features: detected: 32-bit EL1 Support [ 0.229245] CPU: All CPU(s) started at EL2 [ 0.235367] devtmpfs: initialized [ 0.304444] Registered cp15_barrier emulation handler [ 0.304502] Registered setend emulation handler [ 0.304528] KASLR enabled [ 0.304867] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.305056] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.307200] pinctrl core: initialized pinctrl subsystem [ 0.308561] SMBIOS 3.0.0 present. [ 0.308605] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.309380] NET: Registered protocol family 16 [ 0.312214] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.312958] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.313983] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.314063] audit: initializing netlink subsys (disabled) [ 0.314353] audit: type=2000 audit(0.312:1): state=initialized audit_enabled=0 res=1 [ 0.314859] thermal_sys: Registered thermal governor 'step_wise' [ 0.314868] thermal_sys: Registered thermal governor 'power_allocator' [ 0.314889] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.318215] cpuidle: using governor menu [ 0.318665] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.319094] ASID allocator initialised with 32768 entries [ 0.319402] Serial: AMBA PL011 UART driver [ 0.322782] Tegra reboot handler registered. [ 0.392623] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.392737] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.392926] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.392980] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.393146] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.393196] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.393357] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.393423] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.393548] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.393594] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.395718] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.395756] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.395789] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.395821] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.395865] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.395902] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.395932] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.395961] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.395989] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.396020] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.396049] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.396077] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.396105] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.396138] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.396176] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.396205] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.396241] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.396352] mc-err: mcerr ops are set to t19x [ 0.408147] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.408177] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.408190] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.408201] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.416308] ACPI: Interpreter disabled. [ 0.418081] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.419983] iommu: Default domain type: Translated [ 0.420072] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.420625] SCSI subsystem initialized [ 0.420840] usbcore: registered new interface driver usbfs [ 0.420942] usbcore: registered new interface driver hub [ 0.421013] usbcore: registered new device driver usb [ 0.421652] mc: Linux media interface: v0.10 [ 0.421699] videodev: Linux video capture interface: v2.00 [ 0.422116] pps_core: LinuxPPS API ver. 1 registered [ 0.422132] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.422161] PTP clock support registered [ 0.422491] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.422973] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.423066] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.423918] Registered efivars operations [ 0.431991] FPGA manager framework [ 0.432136] Advanced Linux Sound Architecture Driver Initialized. [ 0.432930] Bluetooth: Core ver 2.22 [ 0.433006] NET: Registered protocol family 31 [ 0.433023] Bluetooth: HCI device and connection manager initialized [ 0.433045] Bluetooth: HCI socket layer initialized [ 0.433086] Bluetooth: L2CAP socket layer initialized [ 0.433116] Bluetooth: SCO socket layer initialized [ 0.435262] camchar: rtcpu character device driver loaded [ 0.436202] clocksource: Switched to clocksource arch_sys_counter [ 0.853254] VFS: Disk quotas dquot_6.6.0 [ 0.853341] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.853817] pnp: PnP ACPI: disabled [ 0.868489] la/ptsa driver initialized. [ 0.868641] NET: Registered protocol family 2 [ 0.868860] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.876676] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.876793] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.877143] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.877764] TCP: Hash tables configured (established 65536 bind 65536) [ 0.877909] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.878072] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.878332] NET: Registered protocol family 1 [ 0.879033] RPC: Registered named UNIX socket transport module. [ 0.879052] RPC: Registered udp transport module. [ 0.879065] RPC: Registered tcp transport module. [ 0.879077] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.879115] PCI: CLS 0 bytes, default 64 [ 0.879392] Trying to unpack rootfs image as initramfs... [ 1.145285] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.148566] Freeing initrd memory: 8196K [ 1.153459] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.153492] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.153525] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.153939] kvm [1]: IPA Size Limit: 40 bits [ 1.154642] kvm [1]: vgic interrupt IRQ9 [ 1.155242] kvm [1]: VHE mode initialized successfully [ 1.156908] Initialise system trusted keyrings [ 1.157262] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.162908] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.163745] NFS: Registering the id_resolver key type [ 1.163781] Key type id_resolver registered [ 1.163795] Key type id_legacy registered [ 1.163905] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.163932] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.163978] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.174005] NET: Registered protocol family 38 [ 1.174036] Key type asymmetric registered [ 1.174053] Asymmetric key parser 'x509' registered [ 1.174131] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.174419] io scheduler mq-deadline registered [ 1.174443] io scheduler kyber registered [ 1.179998] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.182963] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.183070] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.183167] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.183235] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.183301] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.188898] scrncapt: init (heads:4 wins:6 planes:4) [ 1.189080] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.189938] EINJ: ACPI disabled. [ 1.193444] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.193500] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.193517] tegra-pmc: ### PMC reset level: L1 [ 1.193533] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.193612] tegra-pmc: PMC Prod config success [ 1.198865] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.204081] random: fast init done [ 1.204443] printk: console [ttyTCU0] enabled [ 2.755851] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.760860] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.765247] arm-smmu 10000000.iommu: stage 1 translation [ 2.770861] arm-smmu 10000000.iommu: stage 2 translation [ 2.776117] arm-smmu 10000000.iommu: nested translation [ 2.781713] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.788637] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.799166] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.801756] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.808570] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.815993] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.821609] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.826332] arm-smmu 12000000.iommu: stage 1 translation [ 2.831586] arm-smmu 12000000.iommu: stage 2 translation [ 2.837269] arm-smmu 12000000.iommu: nested translation [ 2.842696] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.849882] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.860220] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.862974] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.869300] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.876957] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.886719] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.889965] tegra_profiler: auth: init [ 2.893978] THERMAL EST: found 3 subdevs [ 2.897654] THERMAL EST num_resources: 0 [ 2.901237] [THERMAL EST subdev 0] [ 2.904818] [THERMAL EST subdev 1] [ 2.908236] [THERMAL EST subdev 2] [ 2.911200] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.917892] THERMAL EST: thz register success. [ 2.922181] THERMAL EST: end of probe, return err: 0 [ 2.927199] nvsciipc: loaded module [ 2.934314] tun: Universal TUN/TAP device driver, 1.6 [ 2.937069] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.943233] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.948790] e1000e: Intel(R) PRO/1000 Network Driver [ 2.953472] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.959809] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.964847] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.970987] PPP generic driver version 2.4.2 [ 2.975331] PPP BSD Compression module registered [ 2.980077] PPP Deflate Compression module registered [ 2.985333] PPP MPPE Compression module registered [ 2.990347] usbcore: registered new interface driver r8152 [ 2.995588] usbcore: registered new interface driver asix [ 3.001184] usbcore: registered new interface driver ax88179_178a [ 3.007304] usbcore: registered new interface driver cdc_ether [ 3.012998] usbcore: registered new interface driver net1080 [ 3.018603] usbcore: registered new interface driver cdc_subset [ 3.024900] usbcore: registered new interface driver zaurus [ 3.030341] usbcore: registered new interface driver cdc_ncm [ 3.036011] usbcore: registered new interface driver aqc111 [ 3.041917] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.047734] ohci-pci: OHCI PCI platform driver [ 3.052293] ohci-platform: OHCI generic platform driver [ 3.058151] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.064084] usbcore: registered new interface driver uas [ 3.068625] usbcore: registered new interface driver usb-storage [ 3.074482] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.080746] mousedev: PS/2 mouse device common for all mice [ 3.085477] usbcore: registered new interface driver xpad [ 3.093384] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.096209] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.104004] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.110575] i2c /dev entries driver [ 3.113903] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.119914] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.125243] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.130411] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.135736] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.141247] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.146655] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.159997] device-mapper: uevent: version 1.0.3 [ 3.160503] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.167360] cpuidle: Initializing cpuidle driver [ 3.171251] sdhci: Secure Digital Host Controller Interface driver [ 3.176087] sdhci: Copyright(c) Pierre Ossman [ 3.179930] Synopsys Designware Multimedia Card Interface Driver [ 3.186372] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.192422] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.193113] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.205405] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.227498] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.237225] vdd-1v0: supplied by regulator-dummy [ 3.242812] vdd-1v8-hs: supplied by regulator-dummy [ 3.247595] vdd-1v8-ls: supplied by regulator-dummy [ 3.252363] vdd-1v8-ao: supplied by regulator-dummy [ 3.256277] vddio-ddr-1v1: supplied by regulator-dummy [ 3.260726] vdd-rtc: supplied by regulator-dummy [ 3.262538] spmic-ldo1: supplied by regulator-dummy [ 3.263717] vdd-ao-3v3: supplied by regulator-dummy [ 3.269880] vddio-emmc-3v3: supplied by regulator-dummy [ 3.276187] spmic-ldo4: supplied by regulator-dummy [ 3.277352] vdd-usb-3v3: supplied by regulator-dummy [ 3.283561] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.289848] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.295382] spmic-ldo8: supplied by vdd-1v8-ls [ 3.296986] gpio-510 (gpio_default): hogged as output/high [ 3.298350] gpio-511 (gpio_default): hogged as output/high [ 3.301248] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.438368] max77686-rtc max77620-rtc: registered as rtc0 [ 3.439706] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.440087] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.267135] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.268323] hid: raw HID events driver (C) Jiri Kosina [ 4.269189] usbcore: registered new interface driver usbhid [ 4.269345] usbhid: USB HID core driver [ 4.271437] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.272893] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.331297] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.405552] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.064 ms) ÿá[ 4.356838] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.357379] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.358269] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.359168] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.361242] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.361907] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.362633] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.364298] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.364523] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.367283] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.373687] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.379609] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.385231] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.390586] denver_knobs_init:MTS_VERSION:55637613 [ 4.403002] t19x_cache tegra-cache: probed [ 4.405737] optee: probing for conduit method. [ 4.406662] optee: revision 3.16 (65cc2218) [ 4.407557] optee: dynamic shared memory is enabled [ 4.412031] optee: initialized driver [ 4.419058] nvpmodel: initialized successfully [ 4.419923] tegra_hv: get_hvd: not initialized yet [ 4.424240] user_ivc_mempool: hypervisor not present [ 4.430414] usbcore: registered new interface driver snd-usb-audio [ 4.436856] u32 classifier [ 4.438181] input device check on [ 4.441976] Actions configured [ 4.445249] Initializing XFRM netlink socket [ 4.450069] NET: Registered protocol family 10 [ 4.456857] Segment Routing with IPv6 [ 4.457511] NET: Registered protocol family 17 [ 4.462055] NET: Registered protocol family 15 [ 4.466265] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.479872] Bluetooth: RFCOMM socket layer initialized [ 4.484481] Bluetooth: RFCOMM ver 1.11 [ 4.488676] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.494271] Bluetooth: HIDP socket layer initialized [ 4.500435] 9pnet: Installing 9P2000 support [ 4.503628] Key type dns_resolver registered [ 4.509550] registered taskstats version 1 [ 4.512070] Loading compiled-in X.509 certificates [ 4.524968] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.527744] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.537709] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.540035] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.548871] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.556972] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.672216] tegra194-pcie 14160000.pcie: Link up [ 4.675132] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.675391] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.675571] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.675916] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.676206] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.677111] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.677782] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.689789] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.690470] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.690986] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.692652] pci 0004:01:00.0: supports D1 D2 [ 4.692874] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.702667] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.703176] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.703458] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.703884] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.704406] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.704586] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.706768] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.714176] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.722714] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.732862] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.737295] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.742946] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.749992] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.758794] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.760682] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.769379] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.777609] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.892858] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.893314] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.893619] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.893807] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.894255] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.894524] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.894861] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.895279] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.913958] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.914364] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.916418] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.917947] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.919389] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.921004] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.922086] pci 0005:00:00.0: Removing from iommu group 7 [ 5.922447] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.960973] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.984225] host1x 13e10000.host1x: initialized [ 5.985771] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.986800] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.988090] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.988933] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.990332] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.990978] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.992054] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.992698] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.993686] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.994231] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.003038] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.009745] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.019897] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.026966] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.036836] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.043949] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.053597] falcon 15340000.vic: Adding to iommu group 17 [ 6.067912] falcon 15340000.vic: initialized [ 6.068994] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.074884] falcon 15380000.nvjpg: initialized [ 6.075706] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.087065] falcon 154c0000.nvenc: initialized [ 6.087871] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.098205] falcon 15a80000.nvenc1: initialized [ 6.098774] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.109841] nvdec 15480000.nvdec: initialized [ 6.110482] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.120081] nvdec 15140000.nvdec1: initialized [ 6.120730] tsec 15500000.tsec: Adding to iommu group 18 [ 6.126159] tsec 15500000.tsec: initialized [ 6.126708] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.134035] tsec 15100000.tsecb: initialized [ 6.137967] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.166287] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.178265] gpio-374 (wifi-enable): hogged as output/high [ 6.178582] gpio-431 (camera-control-output-low): hogged as output/low [ 6.178895] gpio-432 (camera-control-output-low): hogged as output/low [ 6.180573] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.182618] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.183166] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.184834] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.190292] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.196394] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.201880] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.210276] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.217273] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.229205] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.233956] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.239907] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.248780] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.258269] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.265516] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.273033] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.279002] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.288684] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.294951] pva 16000000.pva0: Adding to iommu group 22 [ 6.321916] pva 16000000.pva0: initialized [ 6.326709] pva 16800000.pva1: Adding to iommu group 23 [ 6.345539] pva 16800000.pva1: initialized [ 6.349595] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.354896] random: crng init done [ 6.363783] nvdla 15880000.nvdla0: initialized [ 6.365219] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.373408] nvdla 158c0000.nvdla1: initialized [ 6.377919] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.378058] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.378194] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.378347] tegradccommon 15200000.display-hub: dma mapping done [ 6.378378] tegradc 15200000.display: Adding to iommu group 26 [ 6.378725] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.385645] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.385763] tegradc 15210000.display: Adding to iommu group 26 [ 6.386226] generic_infoframe_type: 0x87 [ 6.388289] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.388746] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.392793] tegradc 15200000.display: DT parsed successfully [ 6.398437] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.404493] tegradc 15200000.display: Display dc.00000000aa637a43 registered with id=0 [ 6.410079] tegra_cec 3960000.tegra_cec: probed [ 6.419612] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.424524] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.428200] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.428225] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.438789] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.443349] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.450779] kfuse 3830000.kfuse: initialized [ 6.458679] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.466065] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.472572] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.475920] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.485964] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.489175] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.500085] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.506306] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.514781] tegradc 15210000.display: disp0 connected to head1->sor [ 6.521320] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.526290] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.535650] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.541332] tegradc 15210000.display: DT parsed successfully [ 6.547882] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.553924] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.563341] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.602972] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.603561] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.605916] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.614677] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.623333] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.629885] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.637095] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.644461] usb usb1: Product: xHCI Host Controller [ 6.649548] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.655849] usb usb1: SerialNumber: 3610000.xhci [ 6.661434] hub 1-0:1.0: USB hub found [ 6.664130] hub 1-0:1.0: 4 ports detected [ 6.668792] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.673814] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.681279] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.688977] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.696765] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.704011] usb usb2: Product: xHCI Host Controller [ 6.709229] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.715443] usb usb2: SerialNumber: 3610000.xhci [ 6.720927] hub 2-0:1.0: USB hub found [ 6.723877] hub 2-0:1.0: 4 ports detected [ 6.767248] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.773286] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.774809] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.774995] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.787821] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.788938] tegra194-cpufreq ccplex: probed with BWMGR [ 6.790162] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.790662] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.791088] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.792191] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.797855] tegra194-vi5 15c10000.vi: initialized [ 6.799275] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.800647] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.803843] generic_infoframe_type: 0x87 [ 6.810026] mmc0: CQHCI version 5.10 [ 6.810353] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.810378] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.810388] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.810393] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.810397] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.814001] tegradc 15200000.display: DT parsed successfully [ 6.816233] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.816241] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.816246] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.819403] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.826061] tegradc 15200000.display: Display dc.00000000da969cde registered with id=0 [ 6.845595] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.857496] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.864290] nvethernet 2490000.ethernet: Macsec not supported [ 6.866343] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.870918] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.871309] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.878748] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.879421] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.885369] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.885567] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.893199] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.932221] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.937925] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.938737] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.938742] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.940942] tegradc 15200000.display: probed [ 6.965259] mmc0: Command Queue Engine enabled [ 6.969729] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.975192] mmc0: periodic cache flush enabled [ 7.023548] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.023907] Console: switching to colour frame buffer device 240x67 [ 7.024064] tegra-se-nvhost 15810000.se: initialized [ 7.024112] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.030181] tegradc 15200000.display: fb registered [ 7.030188] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.041685] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.045716] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.051112] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.051441] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.058925] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.084229] tegra-se-nvhost 15820000.se: initialized [ 7.090553] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.097013] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.107660] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.114263] tegra-se-nvhost 15830000.se: initialized [ 7.119159] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.125235] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.128049] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.131480] tegra-se-nvhost 15840000.se: initialized [ 7.139187] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.139193] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.139196] usb 1-2: Manufacturer: Generic [ 7.141339] hub 1-2:1.0: USB hub found [ 7.145399] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.152568] hub 1-2:1.0: 4 ports detected [ 7.157601] tegra_actmon d230000.actmon: in actmon_register()... [ 7.170021] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.174356] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.181262] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.194698] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.202430] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.210731] hvc_sysfs: hypervisor is not present [ 7.218476] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.229683] Extcon AUX1(HDMI) enable [ 7.233316] tegradc 15210000.display: disp1 connected to head1->sor [ 7.239440] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.245045] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.246803] tegradc 15210000.display: DT parsed successfully [ 7.260082] tegradc 15210000.display: Display dc.000000004fe08840 registered with id=1 [ 7.260467] ALSA device list: [ 7.268263] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.270965] No soundcards found. [ 7.277201] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.289946] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.293636] tegradc 15210000.display: probed [ 7.295122] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.306756] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.306760] usb 2-3: Manufacturer: Generic [ 7.315680] tegradc 15210000.display: fb registered [ 7.317258] hub 2-3:1.0: USB hub found [ 7.324304] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.326791] hub 2-3:1.0: 4 ports detected [ 7.326883] Freeing unused kernel memory: 3968K [ 7.331884] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.331895] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.353570] tegradc 15210000.display: blank - powerdown [ 7.359086] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.360312] Run /init as init process [ 7.366865] Extcon DP: HPD disabled [ 7.366870] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.366889] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.374040] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.393922] tegradc 15200000.display: blank - powerdown [ 7.408204] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.424212] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.437109] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.437114] Extcon AUX1(HDMI) disable [ 7.460348] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.461165] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.474178] tegradc 15200000.display: unblank [ 7.475194] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.475378] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.481042] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.482920] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.486845] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.486848] Extcon AUX1(HDMI) enable [ 7.488738] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.488742] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.499674] tegradc 15200000.display: sync windows ret = 247 [ 7.529642] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.531109] Extcon HDMI: HPD enabled [ 7.532490] tegradc 15200000.display: hdmi: plugged [ 7.557423] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.558937] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.560432] usb 1-3: Product: Bluetooth Radio [ 7.561737] usb 1-3: Manufacturer: Realtek [ 7.563053] usb 1-3: SerialNumber: 00e04c000001 [ 7.584349] Root device found: mmcblk0p1 [ 7.587904] Found dev node: /dev/mmcblk0p1 [ 7.625539] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.630975] Rootfs mounted over mmcblk0p1 [ 7.668058] Switching from initrd to actual rootfs [ 7.810642] systemd[1]: System time before build time, advancing clock. [ 7.884108] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.889040] systemd[1]: Detected architecture arm64. [ 7.938835] systemd[1]: Set hostname to . [ 8.102970] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.458672] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.460391] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.465880] systemd[1]: Created slice system-modprobe.slice. [ 8.470459] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.474435] systemd[1]: Created slice User and Session Slice. [ 8.477759] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.481824] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.485380] systemd[1]: Reached target User and Group Name Lookups. [ 8.488580] systemd[1]: Reached target Slices. [ 8.491625] systemd[1]: Reached target Swap. [ 8.495565] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.499146] systemd[1]: Listening on Syslog Socket. [ 8.502623] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.505975] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.510165] systemd[1]: Listening on Journal Audit Socket. [ 8.513678] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.517379] systemd[1]: Listening on Journal Socket. [ 8.520956] systemd[1]: Listening on udev Control Socket. [ 8.524422] systemd[1]: Listening on udev Kernel Socket. [ 8.532933] systemd[1]: Mounting Huge Pages File System... [ 8.541365] systemd[1]: Mounting POSIX Message Queue File System... [ 8.550546] systemd[1]: Mounting RPC Pipe File System... [ 8.558813] systemd[1]: Mounting Kernel Debug File System... [ 8.567028] systemd[1]: Mounting Kernel Trace File System... [ 8.576598] systemd[1]: Starting Journal Service... [ 8.585510] systemd[1]: Starting Set the console keyboard layout... [ 8.593545] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.597037] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.603489] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.612622] systemd[1]: Started Nameserver information manager. [ 8.617219] systemd[1]: Reached target Network (Pre). [ 8.625252] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.627463] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.633659] systemd[1]: Starting Load Kernel Modules... [ 8.641133] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.648816] systemd[1]: Starting udev Coldplug all Devices... [ 8.659837] systemd[1]: Mounted Huge Pages File System. [ 8.663514] systemd[1]: Mounted POSIX Message Queue File System. [ 8.667254] systemd[1]: Mounted RPC Pipe File System. [ 8.670831] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.670980] systemd[1]: Mounted Kernel Debug File System. [ 8.673590] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.675775] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.675780] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.675791] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.675796] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.676117] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.676361] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.676506] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.676514] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.698423] systemd[1]: Mounted Kernel Trace File System. [ 8.706491] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.712440] systemd[1]: nvfb-udev.service: Succeeded. [ 8.718390] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.728920] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.742253] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.744424] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.751056] systemd[1]: Starting Load/Save Random Seed... [ 8.759886] systemd[1]: Starting Create System Users... [ 8.767430] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.767430] [ 8.813117] systemd[1]: Finished Load/Save Random Seed. [ 8.819699] systemd[1]: Finished Load Kernel Modules. [ 8.824665] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.831218] systemd[1]: Mounting Kernel Configuration File System... [ 8.840460] systemd[1]: Started OP-TEE Client Supplicant. [ 8.848802] systemd[1]: Starting Apply Kernel Variables... [ 8.858941] systemd[1]: Finished Set the console keyboard layout. [ 8.863126] systemd[1]: Mounted Kernel Configuration File System. [ 8.874756] systemd[1]: Finished Create System Users. [ 10.289773] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.296215] imx219 9-0010: board setup failed [ 10.297535] imx219: probe of 9-0010 failed with error -121 [ 10.318565] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.332285] imx219 10-0010: board setup failed [ 10.334621] imx219: probe of 10-0010 failed with error -121 [ 10.468210] hot-surface-alert cooling state: 0 -> 1 [ 10.839892] using random self ethernet address [ 10.863136] using random host ethernet address [ 12.000748] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.001993] Creating 1 MTD partitions on "spi6.0": [ 12.003139] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.289652] using random self ethernet address [ 12.290787] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.768659] nvidia: loading out-of-tree module taints kernel. [ 59.233829] watchdog: watchdog0: watchdog did not stop! [ 59.677635] Trying to unregister non-registered hwtime source [ 62.734990] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.737052] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0 ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.482] I> register 'maxim' power off handle [0003.484] I> virtual i2c enabled [0003.484] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.607] W> set volts not configured for 'vdd-1v0' [0003.612] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.619] E> invalid display type [0003.620] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.649] I> edid read success [0003.649] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.650] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 4096, height = 2160, frequency = 296703296 [0003.723] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.734] I> hdmi_enable, starting HDMI initialisation [0003.739] I> hdmi_enable, HDMI initialisation complete [0003.748] initializing target [0003.749] calling apps_init() [0003.750] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000788] Console: colour dummy device 80x25 [ 0.002195] printk: console [tty0] enabled [ 0.002256] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002291] pid_max: default: 32768 minimum: 301 [ 0.002492] LSM: Security Framework initializing [ 0.002550] Yama: becoming mindful. [ 0.002592] SELinux: Initializing. [ 0.002793] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002836] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006214] rcu: Hierarchical SRCU implementation. [ 0.006464] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007432] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007483] DTB Build time: Aug 10 2022 20:31:49 [ 0.011077] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011447] Remapping and enabling EFI services. [ 0.013526] smp: Bringing up secondary CPUs ... [ 0.042638] Detected PIPT I-cache on CPU1 [ 0.042760] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074071] Detected PIPT I-cache on CPU2 [ 0.074233] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103828] Detected PIPT I-cache on CPU3 [ 0.103918] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134058] Detected PIPT I-cache on CPU4 [ 0.134243] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163961] Detected PIPT I-cache on CPU5 [ 0.164117] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164467] smp: Brought up 1 node, 6 CPUs [ 0.164716] SMP: Total of 6 processors activated. [ 0.164758] CPU features: detected: Privileged Access Never [ 0.164797] CPU features: detected: LSE atomic instructions [ 0.164811] CPU features: detected: User Access Override [ 0.164824] CPU features: detected: 32-bit EL0 Support [ 0.164836] CPU features: detected: RAS Extension Support [ 0.164848] CPU features: detected: CRC32 instructions [ 0.164860] CPU features: detected: 32-bit EL1 Support [ 0.236376] CPU: All CPU(s) started at EL2 [ 0.242039] devtmpfs: initialized [ 0.292176] Registered cp15_barrier emulation handler [ 0.292273] Registered setend emulation handler [ 0.292295] KASLR enabled [ 0.292586] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.292611] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293894] pinctrl core: initialized pinctrl subsystem [ 0.295077] SMBIOS 3.0.0 present. [ 0.295141] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.295760] NET: Registered protocol family 16 [ 0.297713] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.298232] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.298961] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.299024] audit: initializing netlink subsys (disabled) [ 0.299307] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.299729] thermal_sys: Registered thermal governor 'step_wise' [ 0.299735] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299748] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.303039] cpuidle: using governor menu [ 0.303311] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.303732] ASID allocator initialised with 32768 entries [ 0.303963] Serial: AMBA PL011 UART driver [ 0.309695] Tegra reboot handler registered. [ 0.385096] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.385216] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.385395] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.385435] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.385554] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.385595] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.385720] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.385757] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.385874] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.385910] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.388780] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.388843] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.388871] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.388915] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.388944] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.388969] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.388994] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.389018] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.389043] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.389067] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.389092] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.389116] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.389141] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.389166] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.389195] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.389237] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.389263] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.389383] mc-err: mcerr ops are set to t19x [ 0.402149] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.402171] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.402183] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.402196] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.409727] ACPI: Interpreter disabled. [ 0.411849] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.413631] iommu: Default domain type: Translated [ 0.413730] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.414278] SCSI subsystem initialized [ 0.414543] usbcore: registered new interface driver usbfs [ 0.414615] usbcore: registered new interface driver hub [ 0.414676] usbcore: registered new device driver usb [ 0.415463] mc: Linux media interface: v0.10 [ 0.415538] videodev: Linux video capture interface: v2.00 [ 0.416293] pps_core: LinuxPPS API ver. 1 registered [ 0.416321] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.416367] PTP clock support registered [ 0.416768] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.417234] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.417342] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.418443] Registered efivars operations [ 0.426766] FPGA manager framework [ 0.426965] Advanced Linux Sound Architecture Driver Initialized. [ 0.427781] Bluetooth: Core ver 2.22 [ 0.427832] NET: Registered protocol family 31 [ 0.427848] Bluetooth: HCI device and connection manager initialized [ 0.427903] Bluetooth: HCI socket layer initialized [ 0.427922] Bluetooth: L2CAP socket layer initialized [ 0.427952] Bluetooth: SCO socket layer initialized [ 0.430458] camchar: rtcpu character device driver loaded [ 0.431423] clocksource: Switched to clocksource arch_sys_counter [ 0.831732] VFS: Disk quotas dquot_6.6.0 [ 0.831870] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.832292] pnp: PnP ACPI: disabled [ 0.846190] la/ptsa driver initialized. [ 0.846386] NET: Registered protocol family 2 [ 0.846592] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.854333] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.854524] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.854904] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.855577] TCP: Hash tables configured (established 65536 bind 65536) [ 0.855743] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.855880] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.856133] NET: Registered protocol family 1 [ 0.856821] RPC: Registered named UNIX socket transport module. [ 0.856863] RPC: Registered udp transport module. [ 0.856884] RPC: Registered tcp transport module. [ 0.856904] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.856957] PCI: CLS 0 bytes, default 64 [ 0.857259] Trying to unpack rootfs image as initramfs... [ 1.129755] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.132869] Freeing initrd memory: 8196K [ 1.139095] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.139132] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.139170] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.140065] kvm [1]: IPA Size Limit: 40 bits [ 1.140659] kvm [1]: vgic interrupt IRQ9 [ 1.141352] kvm [1]: VHE mode initialized successfully [ 1.143170] Initialise system trusted keyrings [ 1.143639] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.150416] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.151377] NFS: Registering the id_resolver key type [ 1.151489] Key type id_resolver registered [ 1.151506] Key type id_legacy registered [ 1.151595] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.151618] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.151657] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.162626] NET: Registered protocol family 38 [ 1.162650] Key type asymmetric registered [ 1.162664] Asymmetric key parser 'x509' registered [ 1.162722] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.163053] io scheduler mq-deadline registered [ 1.163075] io scheduler kyber registered [ 1.169885] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.173366] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.173443] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.173512] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.173623] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.173720] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.181414] scrncapt: init (heads:4 wins:6 planes:4) [ 1.181877] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.183006] EINJ: ACPI disabled. [ 1.188182] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.188209] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.188223] tegra-pmc: ### PMC reset level: L1 [ 1.188237] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.188290] tegra-pmc: PMC Prod config success [ 1.194419] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.214066] random: fast init done [ 1.224021] printk: console [ttyTCU0] enabled [ 2.753946] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.757542] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.762140] arm-smmu 10000000.iommu: stage 1 translation [ 2.767970] arm-smmu 10000000.iommu: stage 2 translation [ 2.773093] arm-smmu 10000000.iommu: nested translation [ 2.778444] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.785858] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.795716] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.798964] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.805565] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.813090] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.818600] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.823324] arm-smmu 12000000.iommu: stage 1 translation [ 2.828810] arm-smmu 12000000.iommu: stage 2 translation [ 2.834232] arm-smmu 12000000.iommu: nested translation [ 2.839662] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.846579] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.856556] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.859981] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.866268] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.873745] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.884269] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.887016] tegra_profiler: auth: init [ 2.891223] THERMAL EST: found 3 subdevs [ 2.894373] THERMAL EST num_resources: 0 [ 2.898463] [THERMAL EST subdev 0] [ 2.901525] [THERMAL EST subdev 1] [ 2.905196] [THERMAL EST subdev 2] [ 2.908445] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.914621] THERMAL EST: thz register success. [ 2.919156] THERMAL EST: end of probe, return err: 0 [ 2.924568] nvsciipc: loaded module [ 2.931162] tun: Universal TUN/TAP device driver, 1.6 [ 2.934454] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.939983] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.945553] e1000e: Intel(R) PRO/1000 Network Driver [ 2.950732] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.956539] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.962076] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.968214] PPP generic driver version 2.4.2 [ 2.972548] PPP BSD Compression module registered [ 2.976831] PPP Deflate Compression module registered [ 2.982044] PPP MPPE Compression module registered [ 2.987323] usbcore: registered new interface driver r8152 [ 2.992572] usbcore: registered new interface driver asix [ 2.998150] usbcore: registered new interface driver ax88179_178a [ 3.004041] usbcore: registered new interface driver cdc_ether [ 3.009967] usbcore: registered new interface driver net1080 [ 3.015836] usbcore: registered new interface driver cdc_subset [ 3.021621] usbcore: registered new interface driver zaurus [ 3.027320] usbcore: registered new interface driver cdc_ncm [ 3.033227] usbcore: registered new interface driver aqc111 [ 3.038619] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.044968] ohci-pci: OHCI PCI platform driver [ 3.049252] ohci-platform: OHCI generic platform driver [ 3.055521] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.061597] usbcore: registered new interface driver uas [ 3.065304] usbcore: registered new interface driver usb-storage [ 3.071794] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.077772] mousedev: PS/2 mouse device common for all mice [ 3.082441] usbcore: registered new interface driver xpad [ 3.090459] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.093486] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.101264] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.107883] i2c /dev entries driver [ 3.111177] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.116585] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.121910] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.127662] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.132964] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.138207] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.143660] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.157336] device-mapper: uevent: version 1.0.3 [ 3.157791] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.164244] cpuidle: Initializing cpuidle driver [ 3.168136] sdhci: Secure Digital Host Controller Interface driver [ 3.173062] sdhci: Copyright(c) Pierre Ossman [ 3.176895] Synopsys Designware Multimedia Card Interface Driver [ 3.183470] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.189448] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.195199] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.202629] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.222248] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.231245] vdd-1v0: supplied by regulator-dummy [ 3.236680] vdd-1v8-hs: supplied by regulator-dummy [ 3.241412] vdd-1v8-ls: supplied by regulator-dummy [ 3.246157] vdd-1v8-ao: supplied by regulator-dummy [ 3.249956] vddio-ddr-1v1: supplied by regulator-dummy [ 3.254304] vdd-rtc: supplied by regulator-dummy [ 3.255979] spmic-ldo1: supplied by regulator-dummy [ 3.257292] vdd-ao-3v3: supplied by regulator-dummy [ 3.263449] vddio-emmc-3v3: supplied by regulator-dummy [ 3.269609] spmic-ldo4: supplied by regulator-dummy [ 3.270820] vdd-usb-3v3: supplied by regulator-dummy [ 3.276899] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.283024] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.288501] spmic-ldo8: supplied by vdd-1v8-ls [ 3.289914] gpio-510 (gpio_default): hogged as output/high [ 3.291204] gpio-511 (gpio_default): hogged as output/high [ 3.296249] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.434450] max77686-rtc max77620-rtc: registered as rtc0 [ 3.435450] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.435746] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.142300] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.143282] hid: raw HID events driver (C) Jiri Kosina [ 4.143941] usbcore: registered new interface driver usbhid [ 4.144079] usbhid: USB HID core driver [ 4.146233] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.147321] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.244647] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.320003] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.166 ms) ÿá[ 4.232092] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.232597] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.233883] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.234652] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.236370] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.236986] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.237571] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.239118] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.239645] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.241499] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.249074] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.254787] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.260390] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.267014] denver_knobs_init:MTS_VERSION:55637613 [ 4.279061] t19x_cache tegra-cache: probed [ 4.282057] optee: probing for conduit method. [ 4.282927] optee: revision 3.16 (65cc2218) [ 4.284071] optee: dynamic shared memory is enabled [ 4.287196] optee: initialized driver [ 4.294529] nvpmodel: initialized successfully [ 4.295123] tegra_hv: get_hvd: not initialized yet [ 4.299910] user_ivc_mempool: hypervisor not present [ 4.306047] usbcore: registered new interface driver snd-usb-audio [ 4.312623] u32 classifier [ 4.313538] input device check on [ 4.317125] Actions configured [ 4.320919] Initializing XFRM netlink socket [ 4.325895] NET: Registered protocol family 10 [ 4.332776] Segment Routing with IPv6 [ 4.333076] NET: Registered protocol family 17 [ 4.337198] NET: Registered protocol family 15 [ 4.341756] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.355337] Bluetooth: RFCOMM socket layer initialized [ 4.360114] Bluetooth: RFCOMM ver 1.11 [ 4.363726] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.369831] Bluetooth: HIDP socket layer initialized [ 4.375540] 9pnet: Installing 9P2000 support [ 4.379214] Key type dns_resolver registered [ 4.384514] registered taskstats version 1 [ 4.387707] Loading compiled-in X.509 certificates [ 4.401079] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.403376] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.414034] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.415721] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.423967] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.432596] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.547666] tegra194-pcie 14160000.pcie: Link up [ 4.550669] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.550931] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.551096] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.551339] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.551578] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.552015] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.552492] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.565347] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.565776] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.566346] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.568123] pci 0004:01:00.0: supports D1 D2 [ 4.568296] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.581711] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.582148] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.582429] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.582905] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.583174] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.583380] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.583847] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.589663] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.598410] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.608916] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.613394] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.619211] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.626147] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.635267] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.636122] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.644818] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.653038] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.768432] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.768902] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.769131] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.769280] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.769626] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.769850] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.770233] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.770695] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.793713] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.794133] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.796545] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.797879] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.799862] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.801595] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.802670] pci 0005:00:00.0: Removing from iommu group 7 [ 5.802953] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.838062] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.863336] host1x 13e10000.host1x: initialized [ 5.865016] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.865983] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.867276] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.868191] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.869499] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.870256] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.871608] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.872296] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.873380] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.873976] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.878590] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.885314] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.895743] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.902567] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.912464] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.919165] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.929406] falcon 15340000.vic: Adding to iommu group 17 [ 5.944984] falcon 15340000.vic: initialized [ 5.946005] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.951821] falcon 15380000.nvjpg: initialized [ 5.952414] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.962717] falcon 154c0000.nvenc: initialized [ 5.963319] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.973037] falcon 15a80000.nvenc1: initialized [ 5.973737] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.984638] nvdec 15480000.nvdec: initialized [ 5.985227] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.994508] nvdec 15140000.nvdec1: initialized [ 5.995117] tsec 15500000.tsec: Adding to iommu group 18 [ 6.001290] tsec 15500000.tsec: initialized [ 6.001877] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.010269] tsec 15100000.tsecb: initialized [ 6.015238] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.042399] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.054634] gpio-374 (wifi-enable): hogged as output/high [ 6.054971] gpio-431 (camera-control-output-low): hogged as output/low [ 6.055292] gpio-432 (camera-control-output-low): hogged as output/low [ 6.057145] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.059296] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.059973] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.061442] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.066290] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.072046] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.077259] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.086010] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.093353] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.104796] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.109686] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.115709] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.124572] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.133507] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.140631] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.148833] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.154848] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.164622] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.170467] pva 16000000.pva0: Adding to iommu group 22 [ 6.198117] pva 16000000.pva0: initialized [ 6.203221] pva 16800000.pva1: Adding to iommu group 23 [ 6.216113] pva 16800000.pva1: initialized [ 6.220222] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.235266] nvdla 15880000.nvdla0: initialized [ 6.236972] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.254065] nvdla 158c0000.nvdla1: initialized [ 6.258588] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.258854] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.259022] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.259143] tegradc 15200000.display: Adding to iommu group 26 [ 6.259149] tegradccommon 15200000.display-hub: dma mapping done [ 6.259578] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.260541] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.262518] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.263223] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.265936] tegra_cec 3960000.tegra_cec: probed [ 6.268456] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.268879] tegradc 15210000.display: Adding to iommu group 26 [ 6.271865] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.277085] generic_infoframe_type: 0x87 [ 6.290903] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.292545] tegradc 15200000.display: DT parsed successfully [ 6.299673] kfuse 3830000.kfuse: initialized [ 6.304806] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.310049] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.321569] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.323793] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.324618] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.332050] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.340316] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.344286] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.345239] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.354815] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.361468] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.363062] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.370769] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.379102] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.383660] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.388822] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.399608] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.409180] tegradc 15210000.display: disp0 connected to head1->sor [ 6.442725] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.450262] tegradc 15210000.display: DT parsed successfully [ 6.455307] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.469872] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.472761] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.478400] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.486447] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.495235] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.501691] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.509399] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.516809] usb usb1: Product: xHCI Host Controller [ 6.521601] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.527663] usb usb1: SerialNumber: 3610000.xhci [ 6.533514] hub 1-0:1.0: USB hub found [ 6.536304] hub 1-0:1.0: 4 ports detected [ 6.540972] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.545686] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.553552] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.561206] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.568920] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.576279] usb usb2: Product: xHCI Host Controller [ 6.581118] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.587320] usb usb2: SerialNumber: 3610000.xhci [ 6.593189] hub 2-0:1.0: USB hub found [ 6.595807] hub 2-0:1.0: 4 ports detected [ 6.640248] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.646407] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.648014] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.648257] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.661550] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.662670] tegra194-cpufreq ccplex: probed with BWMGR [ 6.663972] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.664340] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.664831] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.666188] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.673716] tegra194-vi5 15c10000.vi: initialized [ 6.675368] tegradc 15210000.display: disp0 connected to head1->sor [ 6.675378] mmc0: CQHCI version 5.10 [ 6.676110] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.676577] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.676802] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.676808] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.676815] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.676820] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.676843] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.683530] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.687064] tegradc 15210000.display: DT parsed successfully [ 6.693192] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.693201] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.700895] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.761213] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.767266] generic_infoframe_type: 0x87 [ 6.771580] tegradc 15200000.display: DT parsed successfully [ 6.772218] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.776816] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.792424] nvethernet 2490000.ethernet: Macsec not supported [ 6.797120] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.798130] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.799388] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.800540] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.800681] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.800815] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.801736] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.803285] tegra-se-nvhost 15810000.se: initialized [ 6.805735] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.808521] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.808993] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.809662] tegra-se-nvhost 15820000.se: initialized [ 6.811726] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.812169] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.812770] tegra-se-nvhost 15830000.se: initialized [ 6.814010] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.814013] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.814072] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.814472] tegradc 15200000.display: vblank syncpt # 14 for dc 0 [ 6.814609] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.815198] tegra-se-nvhost 15840000.se: initialized [ 6.816956] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.818418] tegra_actmon d230000.actmon: in actmon_register()... [ 6.818569] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.818993] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.819517] hvc_sysfs: hypervisor is not present [ 6.848924] ALSA device list: [ 6.852689] tegradc 15200000.display: vpulse3 syncpt # 16 for dc 0 [ 6.973672] No soundcards found. [ 6.987620] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 7.027696] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8195x57005 (on 0x0mm) pclk=148350937 [ 7.027735] ************************************** [ 7.027743] CPU:0, Error:cbb-noc [ 7.028234] Error Logger : 0 [ 7.028339] ErrLog0 : 0x80030000 [ 7.028442] Transaction Type : RD - Read, Incrementing [ 7.028623] Error Code : SLV [ 7.028718] Error Source : Target [ 7.028808] Error Description : Target error detected by CBB slave [ 7.028991] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 7.033708] Packet header Lock : 0 [ 7.037636] Packet header Len1 : 3 [ 7.040965] NOC protocol version : version >= 2.7 [ 7.046212] ErrLog1 : 0x350e24 [ 7.049624] ErrLog2 : 0x0 [ 7.052256] RouteId : 0x350e24 [ 7.055928] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 7.060654] Targflow : host1x_p2pm/T/host1x_p2pm [ 7.065723] TargSubRange : 7 [ 7.068961] SeqId : 0 [ 7.071761] ErrLog3 : 0x101c [ 7.074736] ErrLog4 : 0x0 [ 7.077625] Address accessed : 0x1520101c [ 7.081829] ErrLog5 : 0x909f851 [ 7.085324] Non-Modify : 0x1 [ 7.088736] AXI ID : 0x12 [ 7.091629] Master ID : CCPLEX [ 7.095229] Security Group(GRPSEC): 0x7e [ 7.099155] Cache : 0x1 -- Bufferable [ 7.103613] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.110436] FALCONSEC : 0x0 [ 7.113587] Virtual Queuing Channel(VQC): 0x0 [ 7.117967] ************************************** [ 7.123004] ------------[ cut here ]------------ [ 7.127763] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.134326] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.139232] Modules linked in: [ 7.142642] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 7.149288] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.161284] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.167582] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.172301] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.177045] sp : ffff800010003b30 [ 7.180443] x29: ffff800010003b30 x28: 0000000000000001 [ 7.185863] x27: 0000000000000005 x26: ffffdc9fd46e3f58 [ 7.191287] x25: ffffdc9fd503ce10 x24: 0000000000000001 [ 7.196455] x23: ffffdc9fd49d7000 x22: ffffdc9fd4e5ea00 [ 7.202063] x21: 000000000000000f x20: ffff172c80e66280 [ 7.207304] x19: ffffdc9fd4e5ea00 x18: 0000000000000010 [ 7.212987] x17: ffffdc9fd3e1f5a0 x16: 00000000f64c97e3 [ 7.218324] x15: ffffdc9fd4cd2bf0 x14: 0720072007200720 [ 7.223836] x13: 0720072007200720 x12: 0720072007200720 [ 7.229349] x11: 0720072007200720 x10: 0720072007200720 [ 7.234862] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.240116] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.245886] x5 : 0000000000057fa8 x4 : ffffdc9fd4ce7968 [ 7.251071] x3 : 00000000ffffffff x2 : ffffdc9fd317e090 [ 7.256391] x1 : ffffdc9fd4cd2680 x0 : 0000000000010101 [ 7.261729] Call trace: [ 7.264456] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.268472] __handle_irq_event_percpu+0x68/0x2a0 [ 7.273295] handle_irq_event_percpu+0x40/0xa0 [ 7.277482] handle_irq_event+0x50/0xf0 [ 7.281245] handle_fasteoi_irq+0xc0/0x170 [ 7.285285] generic_handle_irq+0x40/0x60 [ 7.289293] __handle_domain_irq+0x70/0xd0 [ 7.293494] efi_header_end+0xb0/0xf0 [ 7.297269] el1_irq+0xd0/0x180 [ 7.300227] __do_softirq+0xb4/0x3e8 [ 7.303644] irq_exit+0xc0/0xe0 [ 7.306635] __handle_domain_irq+0x74/0xd0 [ 7.310645] efi_header_end+0xb0/0xf0 [ 7.314576] el1_irq+0xd0/0x180 [ 7.317553] cpuidle_enter_state+0xb8/0x410 [ 7.321336] cpuidle_enter+0x40/0x60 [ 7.325254] call_cpuidle+0x44/0x80 [ 7.328750] do_idle+0x208/0x270 [ 7.332003] cpu_startup_entry+0x2c/0x70 [ 7.335840] rest_init+0xdc/0xe8 [ 7.338998] arch_call_rest_init+0x18/0x20 [ 7.343452] start_kernel+0x514/0x54c [ 7.347049] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.353023] ---[ end trace 4de3d680c136f1d8 ]--- [ 7.357800] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.365324] SMP: stopping secondary CPUs [ 7.369196] Kernel Offset: 0x5c9fc2fc0000 from 0xffff800010000000 [ 7.375473] PHYS_OFFSET: 0xffffe8d480000000 [ 7.379588] CPU features: 0x8240002,03802a30 [ 7.383791] Memory Limit: none [ 7.386947] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 69000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.905] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.922] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.321] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.029] > DEVICE_PROD: device prod is not initialized. [0002.335] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.336] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.336] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.337] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.337] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.338] I> dram_block larger than 80000000 [0002.340] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.351] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.355] I> found decompressor handler: lz4 [0002.583] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.585] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 1ÿâclk_dt_late initialized ÿä1ÿânoc_late initialized pm_post initialized dbells initialized ÿä 03ÿâdmce initialized ÿä:ÿâcvc initialized ÿä23:20 UTC 20ÿâavfs_clk_mach_post initialized ÿä22 aaÿâavfs_clk_platform_post initialized ÿärcÿâcvc_late initialized regulator_post initialized ÿäh64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.569] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.589] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.746] calling apps_init() [0003.747] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000692] Console: colour dummy device 80x25 [ 0.002125] printk: console [tty0] enabled [ 0.002206] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002243] pid_max: default: 32768 minimum: 301 [ 0.002429] LSM: Security Framework initializing [ 0.002547] Yama: becoming mindful. [ 0.002594] SELinux: Initializing. [ 0.002764] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002805] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005730] rcu: Hierarchical SRCU implementation. [ 0.005983] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006792] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006852] DTB Build time: Aug 10 2022 20:31:49 [ 0.010002] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010259] Remapping and enabling EFI services. [ 0.012189] smp: Bringing up secondary CPUs ... [ 0.043478] Detected PIPT I-cache on CPU1 [ 0.043577] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073029] Detected PIPT I-cache on CPU2 [ 0.073178] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102733] Detected PIPT I-cache on CPU3 [ 0.102823] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132504] Detected PIPT I-cache on CPU4 [ 0.132650] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162372] Detected PIPT I-cache on CPU5 [ 0.162498] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162833] smp: Brought up 1 node, 6 CPUs [ 0.163002] SMP: Total of 6 processors activated. [ 0.163082] CPU features: detected: Privileged Access Never [ 0.163109] CPU features: detected: LSE atomic instructions [ 0.163124] CPU features: detected: User Access Override [ 0.163138] CPU features: detected: 32-bit EL0 Support [ 0.163153] CPU features: detected: RAS Extension Support [ 0.163168] CPU features: detected: CRC32 instructions [ 0.163183] CPU features: detected: 32-bit EL1 Support [ 0.236084] CPU: All CPU(s) started at EL2 [ 0.244011] devtmpfs: initialized [ 0.291293] Registered cp15_barrier emulation handler [ 0.291415] Registered setend emulation handler [ 0.291436] KASLR enabled [ 0.291721] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291746] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293133] pinctrl core: initialized pinctrl subsystem [ 0.294111] SMBIOS 3.0.0 present. [ 0.294143] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294725] NET: Registered protocol family 16 [ 0.296747] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.297258] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297963] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.298023] audit: initializing netlink subsys (disabled) [ 0.298287] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.298722] thermal_sys: Registered thermal governor 'step_wise' [ 0.298728] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298743] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.301112] cpuidle: using governor menu [ 0.301529] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.301990] ASID allocator initialised with 32768 entries [ 0.302227] Serial: AMBA PL011 UART driver [ 0.305485] Tegra reboot handler registered. [ 0.379257] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.379453] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.379629] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.379672] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.379816] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.379858] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.379970] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.380019] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.380142] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.380184] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.382335] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.382368] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.382396] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.382423] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.382452] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.382478] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.382517] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.382551] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.382641] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.382688] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.382733] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.382760] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.382787] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.382813] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.382839] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.382864] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.382890] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.383001] mc-err: mcerr ops are set to t19x [ 0.396052] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.396074] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.396087] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.396099] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.402144] ACPI: Interpreter disabled. [ 0.403296] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.404666] iommu: Default domain type: Translated [ 0.404734] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.405134] SCSI subsystem initialized [ 0.405301] usbcore: registered new interface driver usbfs [ 0.405347] usbcore: registered new interface driver hub [ 0.405382] usbcore: registered new device driver usb [ 0.405802] mc: Linux media interface: v0.10 [ 0.405834] videodev: Linux video capture interface: v2.00 [ 0.406160] pps_core: LinuxPPS API ver. 1 registered [ 0.406173] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.406193] PTP clock support registered [ 0.406424] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.406730] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.406783] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.407498] Registered efivars operations [ 0.413138] FPGA manager framework [ 0.413243] Advanced Linux Sound Architecture Driver Initialized. [ 0.413877] Bluetooth: Core ver 2.22 [ 0.413942] NET: Registered protocol family 31 [ 0.413954] Bluetooth: HCI device and connection manager initialized [ 0.413972] Bluetooth: HCI socket layer initialized [ 0.414007] Bluetooth: L2CAP socket layer initialized [ 0.414029] Bluetooth: SCO socket layer initialized [ 0.415545] camchar: rtcpu character device driver loaded [ 0.416205] clocksource: Switched to clocksource arch_sys_counter [ 0.763132] VFS: Disk quotas dquot_6.6.0 [ 0.763220] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.763584] pnp: PnP ACPI: disabled [ 0.773604] la/ptsa driver initialized. [ 0.773718] NET: Registered protocol family 2 [ 0.773886] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.778381] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.778469] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.778760] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.779195] TCP: Hash tables configured (established 65536 bind 65536) [ 0.779312] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.779441] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.779619] NET: Registered protocol family 1 [ 0.780806] RPC: Registered named UNIX socket transport module. [ 0.780833] RPC: Registered udp transport module. [ 0.780846] RPC: Registered tcp transport module. [ 0.780859] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.780881] PCI: CLS 0 bytes, default 64 [ 0.781159] Trying to unpack rootfs image as initramfs... [ 1.050937] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.053999] Freeing initrd memory: 8196K [ 1.059078] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.059140] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.059187] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.059563] kvm [1]: IPA Size Limit: 40 bits [ 1.060119] kvm [1]: vgic interrupt IRQ9 [ 1.060767] kvm [1]: VHE mode initialized successfully [ 1.062409] Initialise system trusted keyrings [ 1.062794] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.070473] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.071444] NFS: Registering the id_resolver key type [ 1.071479] Key type id_resolver registered [ 1.071493] Key type id_legacy registered [ 1.071585] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.071633] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.071671] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.082390] NET: Registered protocol family 38 [ 1.082413] Key type asymmetric registered [ 1.082428] Asymmetric key parser 'x509' registered [ 1.082482] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.082793] io scheduler mq-deadline registered [ 1.082817] io scheduler kyber registered [ 1.089875] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.093299] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.093379] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.093451] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.093522] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.093590] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.100455] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.100574] scrncapt: init (heads:4 wins:6 planes:4) [ 1.101976] EINJ: ACPI disabled. [ 1.105984] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.106012] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.106027] tegra-pmc: ### PMC reset level: L1 [ 1.106067] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.106120] tegra-pmc: PMC Prod config success [ 1.112337] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.128477] random: fast init done [ 1.129594] printk: console [ttyTCU0] enabled [ 2.670379] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.674554] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.679132] arm-smmu 10000000.iommu: stage 1 translation [ 2.684450] arm-smmu 10000000.iommu: stage 2 translation [ 2.690106] arm-smmu 10000000.iommu: nested translation [ 2.695211] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.702363] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.713649] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.715720] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.722569] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.730258] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.735347] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.740097] arm-smmu 12000000.iommu: stage 1 translation [ 2.745850] arm-smmu 12000000.iommu: stage 2 translation [ 2.751008] arm-smmu 12000000.iommu: nested translation [ 2.756694] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.763871] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.775136] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.776993] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.783553] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.790918] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.800946] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.803726] tegra_profiler: auth: init [ 2.808279] THERMAL EST: found 3 subdevs [ 2.811356] THERMAL EST num_resources: 0 [ 2.815491] [THERMAL EST subdev 0] [ 2.818558] [THERMAL EST subdev 1] [ 2.822226] [THERMAL EST subdev 2] [ 2.825213] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.831718] THERMAL EST: thz register success. [ 2.835930] THERMAL EST: end of probe, return err: 0 [ 2.841548] nvsciipc: loaded module [ 2.848950] tun: Universal TUN/TAP device driver, 1.6 [ 2.850802] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.857262] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.862821] e1000e: Intel(R) PRO/1000 Network Driver [ 2.867753] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.873817] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.878846] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.885246] PPP generic driver version 2.4.2 [ 2.889285] PPP BSD Compression module registered [ 2.894089] PPP Deflate Compression module registered [ 2.899355] PPP MPPE Compression module registered [ 2.904091] usbcore: registered new interface driver r8152 [ 2.909591] usbcore: registered new interface driver asix [ 2.914930] usbcore: registered new interface driver ax88179_178a [ 2.921305] usbcore: registered new interface driver cdc_ether [ 2.927276] usbcore: registered new interface driver net1080 [ 2.932619] usbcore: registered new interface driver cdc_subset [ 2.938962] usbcore: registered new interface driver zaurus [ 2.944631] usbcore: registered new interface driver cdc_ncm [ 2.950011] usbcore: registered new interface driver aqc111 [ 2.955660] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.961996] ohci-pci: OHCI PCI platform driver [ 2.966038] ohci-platform: OHCI generic platform driver [ 2.972146] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.978574] usbcore: registered new interface driver uas [ 2.982589] usbcore: registered new interface driver usb-storage [ 2.988503] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.994784] mousedev: PS/2 mouse device common for all mice [ 2.999738] usbcore: registered new interface driver xpad [ 3.007806] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.010263] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.018299] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.024785] i2c /dev entries driver [ 3.027860] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.033764] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.039469] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.044660] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.049753] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.055590] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.060763] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.074749] device-mapper: uevent: version 1.0.3 [ 3.075191] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.081262] cpuidle: Initializing cpuidle driver [ 3.085451] sdhci: Secure Digital Host Controller Interface driver [ 3.090086] sdhci: Copyright(c) Pierre Ossman [ 3.094176] Synopsys Designware Multimedia Card Interface Driver [ 3.100130] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.106420] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.107289] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.119492] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.142094] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.151820] vdd-1v0: supplied by regulator-dummy [ 3.157427] vdd-1v8-hs: supplied by regulator-dummy [ 3.162391] vdd-1v8-ls: supplied by regulator-dummy [ 3.167261] vdd-1v8-ao: supplied by regulator-dummy [ 3.171331] vddio-ddr-1v1: supplied by regulator-dummy [ 3.175896] vdd-rtc: supplied by regulator-dummy [ 3.177802] spmic-ldo1: supplied by regulator-dummy [ 3.179108] vdd-ao-3v3: supplied by regulator-dummy [ 3.185455] vddio-emmc-3v3: supplied by regulator-dummy [ 3.191884] spmic-ldo4: supplied by regulator-dummy [ 3.193201] vdd-usb-3v3: supplied by regulator-dummy [ 3.199412] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.205709] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.211335] spmic-ldo8: supplied by vdd-1v8-ls [ 3.212975] gpio-510 (gpio_default): hogged as output/high [ 3.214356] gpio-511 (gpio_default): hogged as output/high [ 3.217390] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.353654] max77686-rtc max77620-rtc: registered as rtc0 [ 3.355033] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.355366] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.193471] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.194725] hid: raw HID events driver (C) Jiri Kosina [ 4.195477] usbcore: registered new interface driver usbhid [ 4.195619] usbhid: USB HID core driver [ 4.197605] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.198870] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.947656] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.022363] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.516 ms) ÿá[ 4.283634] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.284557] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.286152] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.287028] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.289223] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.289978] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.290651] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.292792] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.293196] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.295658] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.300417] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.306613] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.311886] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.318551] denver_knobs_init:MTS_VERSION:55637613 [ 4.329807] t19x_cache tegra-cache: probed [ 4.332585] optee: probing for conduit method. [ 4.333449] optee: revision 3.16 (65cc2218) [ 4.334561] optee: dynamic shared memory is enabled [ 4.338329] optee: initialized driver [ 4.345262] nvpmodel: initialized successfully [ 4.346026] tegra_hv: get_hvd: not initialized yet [ 4.350807] user_ivc_mempool: hypervisor not present [ 4.357116] usbcore: registered new interface driver snd-usb-audio [ 4.363666] u32 classifier [ 4.364593] input device check on [ 4.368259] Actions configured [ 4.371878] Initializing XFRM netlink socket [ 4.377375] NET: Registered protocol family 10 [ 4.384356] Segment Routing with IPv6 [ 4.384614] NET: Registered protocol family 17 [ 4.388119] NET: Registered protocol family 15 [ 4.392887] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.406857] Bluetooth: RFCOMM socket layer initialized [ 4.411134] Bluetooth: RFCOMM ver 1.11 [ 4.414733] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.420965] Bluetooth: HIDP socket layer initialized [ 4.427024] 9pnet: Installing 9P2000 support [ 4.430008] Key type dns_resolver registered [ 4.435945] registered taskstats version 1 [ 4.438476] Loading compiled-in X.509 certificates [ 4.452857] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.454726] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.466175] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.466534] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.475381] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.483847] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.600335] tegra194-pcie 14160000.pcie: Link up [ 4.603348] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.603596] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.603788] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.604032] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.604375] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.604795] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.605227] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.617596] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.618115] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.618598] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.620172] pci 0004:01:00.0: supports D1 D2 [ 4.620633] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.629606] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.629952] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.630245] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.630811] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.631078] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.631294] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.635357] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.642697] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.651516] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.661310] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.666109] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.672334] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.678598] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.687928] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.689200] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.697551] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.706198] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.812308] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.813087] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.813309] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.813463] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.813739] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.813983] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.814373] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.814779] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.832853] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.833146] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.834943] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.836027] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.838532] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.840506] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.841406] pci 0005:00:00.0: Removing from iommu group 7 [ 5.841650] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.873236] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.896850] host1x 13e10000.host1x: initialized [ 5.898628] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.899791] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.900968] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.901675] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.902476] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.903033] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.903775] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.904603] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.905442] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.912854] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.922405] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.929629] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.939284] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.946566] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.956588] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.963295] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.973107] falcon 15340000.vic: Adding to iommu group 17 [ 5.987904] falcon 15340000.vic: initialized [ 5.988892] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.994434] falcon 15380000.nvjpg: initialized [ 5.995148] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.006093] falcon 154c0000.nvenc: initialized [ 6.006630] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.016720] falcon 15a80000.nvenc1: initialized [ 6.017372] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.027728] nvdec 15480000.nvdec: initialized [ 6.028571] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.038517] nvdec 15140000.nvdec1: initialized [ 6.039337] tsec 15500000.tsec: Adding to iommu group 18 [ 6.045947] tsec 15500000.tsec: initialized [ 6.046470] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.053582] tsec 15100000.tsecb: initialized [ 6.057267] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.081241] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.093605] gpio-374 (wifi-enable): hogged as output/high [ 6.093927] gpio-431 (camera-control-output-low): hogged as output/low [ 6.094203] gpio-432 (camera-control-output-low): hogged as output/low [ 6.095831] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.097820] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.098341] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.104823] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.110161] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.115953] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.121024] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.129875] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.137590] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.148756] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.153738] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.159624] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.168536] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.177417] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.184959] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.192410] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.198567] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.208167] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.214717] pva 16000000.pva0: Adding to iommu group 22 [ 6.240442] pva 16000000.pva0: initialized [ 6.246090] pva 16800000.pva1: Adding to iommu group 23 [ 6.256820] pva 16800000.pva1: initialized [ 6.261967] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.274693] nvdla 15880000.nvdla0: initialized [ 6.276386] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.284600] nvdla 158c0000.nvdla1: initialized [ 6.288077] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.288371] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.288401] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.288519] tegradccommon 15200000.display-hub: dma mapping done [ 6.289389] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.290247] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.291155] tegradc 15200000.display: Adding to iommu group 26 [ 6.291385] tegradc 15210000.display: Adding to iommu group 26 [ 6.293351] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.302336] tegradc 15210000.display: disp0 connected to head1->sor [ 6.304473] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.311536] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.316426] tegra_cec 3960000.tegra_cec: probed [ 6.322388] tegradc 15210000.display: DT parsed successfully [ 6.330715] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.334075] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.341888] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.346842] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.353757] kfuse 3830000.kfuse: initialized [ 6.360852] generic_infoframe_type: 0x87 [ 6.366995] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.370550] tegradc 15200000.display: DT parsed successfully [ 6.374638] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.375261] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.380945] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.387988] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.416976] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.418145] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.424580] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.431125] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.438335] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.455680] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.456714] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.461194] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.468312] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.482892] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.495442] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.503106] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.504389] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.508498] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.523516] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.524163] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.539315] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.545773] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.553548] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.560517] usb usb1: Product: xHCI Host Controller [ 6.565713] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.571834] usb usb1: SerialNumber: 3610000.xhci [ 6.577933] hub 1-0:1.0: USB hub found [ 6.580314] hub 1-0:1.0: 4 ports detected [ 6.584980] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.589825] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.597492] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.605002] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.613098] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.620314] usb usb2: Product: xHCI Host Controller [ 6.625076] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.631274] usb usb2: SerialNumber: 3610000.xhci [ 6.636986] hub 2-0:1.0: USB hub found [ 6.639685] hub 2-0:1.0: 4 ports detected [ 6.682167] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.687408] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.688759] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.688956] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.702485] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.703477] tegra194-cpufreq ccplex: probed with BWMGR [ 6.704822] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.705532] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.706001] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.707373] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.716616] mmc0: CQHCI version 5.10 [ 6.716892] tegra194-vi5 15c10000.vi: initialized [ 6.718841] tegradc 15210000.display: disp0 connected to head1->sor [ 6.719979] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.723605] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.729996] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.737093] tegradc 15210000.display: DT parsed successfully [ 6.744842] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.750502] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.750648] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.757154] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.757161] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.757175] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.764985] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.765052] generic_infoframe_type: 0x87 [ 6.776284] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.778308] tegradc 15200000.display: DT parsed successfully [ 6.784456] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.784471] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.791339] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.800257] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.803660] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.815064] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.815070] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.829105] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.836538] nvethernet 2490000.ethernet: Macsec not supported [ 6.843951] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.846343] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.851797] mmc0: Command Queue Engine enabled [ 6.851801] mmc0: periodic cache flush enabled [ 6.851824] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.852468] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.852622] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.853821] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.854901] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.855054] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.855184] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.857723] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.859243] tegra-se-nvhost 15810000.se: initialized [ 6.863529] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.864385] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.864903] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.865608] tegra-se-nvhost 15820000.se: initialized [ 6.867531] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.868007] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.868714] tegra-se-nvhost 15830000.se: initialized [ 6.869976] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.876398] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.880852] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.881129] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.881778] tegra-se-nvhost 15840000.se: initialized [ 6.883530] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.885008] tegra_actmon d230000.actmon: in actmon_register()... [ 6.885169] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.885494] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.886030] hvc_sysfs: hypervisor is not present [ 6.886843] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.912477] ALSA device list: [ 6.923101] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.923296] No soundcards found. [ 6.928816] ************************************** [ 6.928822] CPU:0, Error:cbb-noc [ 7.095156] Error Logger : 0 [ 7.095166] ErrLog0 : 0x80030000 [ 7.095187] Transaction Type : RD - Read, Incrementing [ 7.107567] Error Code : SLV [ 7.107570] Error Source : Target [ 7.107574] Error Description : Target error detected by CBB slave [ 7.107584] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 7.128653] Packet header Lock : 0 [ 7.132237] Packet header Len1 : 3 [ 7.135825] NOC protocol version : version >= 2.7 [ 7.140813] ErrLog1 : 0x352426 [ 7.144137] ErrLog2 : 0x0 [ 7.146592] RouteId : 0x352426 [ 7.150005] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 7.155248] Targflow : host1x_p2pm/T/host1x_p2pm [ 7.160062] TargSubRange : 18 [ 7.163299] SeqId : 0 [ 7.166100] ErrLog3 : 0x4045c [ 7.169337] ErrLog4 : 0x0 [ 7.172242] Address accessed : 0x15b4045c [ 7.176517] ErrLog5 : 0x989f851 [ 7.179666] Non-Modify : 0x1 [ 7.183080] AXI ID : 0x13 [ 7.186500] Master ID : CCPLEX [ 7.189554] Security Group(GRPSEC): 0x7e [ 7.194014] Cache : 0x1 -- Bufferable [ 7.198212] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.205050] FALCONSEC : 0x0 [ 7.207928] Virtual Queuing Channel(VQC): 0x0 [ 7.212569] ************************************** [ 7.217862] ------------[ cut here ]------------ [ 7.222106] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.228926] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.234176] Modules linked in: [ 7.236898] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 7.243817] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.255795] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.261837] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.266572] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.271283] sp : ffff800010003b30 [ 7.274952] x29: ffff800010003b30 x28: 0000000000000001 [ 7.280389] x27: 0000000000000005 x26: ffffb1f428a43f58 [ 7.285801] x25: ffffb1f42939ce10 x24: 0000000000000001 [ 7.290967] x23: ffffb1f428d37000 x22: ffffb1f4291bea00 [ 7.296562] x21: 000000000000000f x20: ffff42d5c0e66180 [ 7.301819] x19: ffffb1f4291bea00 x18: 0000000000000010 [ 7.307258] x17: 0000000000000007 x16: 000000000000000e [ 7.312838] x15: ffffb1f429032bf0 x14: 0720072007200720 [ 7.318092] x13: 0720072007200720 x12: 0720072007200720 [ 7.323605] x11: 0720072007200720 x10: 0720072007200720 [ 7.329120] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.334904] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.340399] x5 : 0000000000057fa8 x4 : ffffb1f429047968 [ 7.345566] x3 : 00000000ffffffff x2 : ffffb1f4274de090 [ 7.350906] x1 : ffffb1f429032680 x0 : 0000000100010101 [ 7.356499] Call trace: [ 7.358711] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.363242] __handle_irq_event_percpu+0x68/0x2a0 [ 7.367707] handle_irq_event_percpu+0x40/0xa0 [ 7.372253] handle_irq_event+0x50/0xf0 [ 7.376014] handle_fasteoi_irq+0xc0/0x170 [ 7.380056] generic_handle_irq+0x40/0x60 [ 7.384065] __handle_domain_irq+0x70/0xd0 [ 7.388008] efi_header_end+0xb0/0xf0 [ 7.391522] el1_irq+0xd0/0x180 [ 7.394739] __do_softirq+0xb4/0x3e8 [ 7.398415] irq_exit+0xc0/0xe0 [ 7.401407] __handle_domain_irq+0x74/0xd0 [ 7.405413] efi_header_end+0xb0/0xf0 [ 7.409088] el1_irq+0xd0/0x180 [ 7.412080] cpuidle_enter_state+0xb8/0x410 [ 7.416089] cpuidle_enter+0x40/0x60 [ 7.419507] call_cpuidle+0x44/0x80 [ 7.423266] do_idle+0x208/0x270 [ 7.426502] cpu_startup_entry+0x30/0x70 [ 7.430353] rest_init+0xdc/0xe8 [ 7.433512] arch_call_rest_init+0x18/0x20 [ 7.437966] start_kernel+0x514/0x54c [ 7.441556] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.447515] ---[ end trace 81f4498b54e98d82 ]--- [ 7.452314] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.459581] SMP: stopping secondary CPUs [ 7.463530] Kernel Offset: 0x31f417320000 from 0xffff800010000000 [ 7.469986] PHYS_OFFSET: 0xffffbd2b40000000 [ 7.473844] CPU features: 0x8240002,03802a30 [ 7.478305] Memory Limit: none [ 7.481717] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿänalÿâadc initialized ÿä ÿâfmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aÿâclk_dt_late initialized ÿäuÿânoc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized cvc initialized ÿä 03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 202ÿâavfs_clk_platform_post initialized ÿä2 ÿâcvc_late initialized regulator_post initialized ÿäaarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.486] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.645] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.745] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000757] Console: colour dummy device 80x25 [ 0.002051] printk: console [tty0] enabled [ 0.002109] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002146] pid_max: default: 32768 minimum: 301 [ 0.002369] LSM: Security Framework initializing [ 0.002427] Yama: becoming mindful. [ 0.002471] SELinux: Initializing. [ 0.002613] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002653] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005765] rcu: Hierarchical SRCU implementation. [ 0.006007] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006971] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007020] DTB Build time: Aug 10 2022 20:31:49 [ 0.010095] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010339] Remapping and enabling EFI services. [ 0.012490] smp: Bringing up secondary CPUs ... [ 0.044580] Detected PIPT I-cache on CPU1 [ 0.044699] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.077536] Detected PIPT I-cache on CPU2 [ 0.077679] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.107181] Detected PIPT I-cache on CPU3 [ 0.107313] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.136925] Detected PIPT I-cache on CPU4 [ 0.137101] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.166636] Detected PIPT I-cache on CPU5 [ 0.166788] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.167080] smp: Brought up 1 node, 6 CPUs [ 0.167292] SMP: Total of 6 processors activated. [ 0.167374] CPU features: detected: Privileged Access Never [ 0.167408] CPU features: detected: LSE atomic instructions [ 0.167427] CPU features: detected: User Access Override [ 0.167464] CPU features: detected: 32-bit EL0 Support [ 0.167491] CPU features: detected: RAS Extension Support [ 0.167511] CPU features: detected: CRC32 instructions [ 0.167547] CPU features: detected: 32-bit EL1 Support [ 0.236609] CPU: All CPU(s) started at EL2 [ 0.243726] devtmpfs: initialized [ 0.292967] Registered cp15_barrier emulation handler [ 0.293083] Registered setend emulation handler [ 0.293107] KASLR enabled [ 0.293351] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.293377] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.294738] pinctrl core: initialized pinctrl subsystem [ 0.295748] SMBIOS 3.0.0 present. [ 0.295798] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.296424] NET: Registered protocol family 16 [ 0.298395] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.298898] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.299667] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.299726] audit: initializing netlink subsys (disabled) [ 0.299975] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.300374] thermal_sys: Registered thermal governor 'step_wise' [ 0.300380] thermal_sys: Registered thermal governor 'power_allocator' [ 0.300400] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.302417] cpuidle: using governor menu [ 0.302960] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.303397] ASID allocator initialised with 32768 entries [ 0.303656] Serial: AMBA PL011 UART driver [ 0.306898] Tegra reboot handler registered. [ 0.375098] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375277] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.375472] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.375527] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.375672] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.375740] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.375870] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.375915] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376033] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376080] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.378765] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.378805] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.378836] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.378865] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.378948] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.378983] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379021] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379051] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379077] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379103] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379127] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379152] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379177] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379216] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379246] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379300] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379331] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.379445] mc-err: mcerr ops are set to t19x [ 0.391279] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391304] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.391317] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391329] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.398177] ACPI: Interpreter disabled. [ 0.399232] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400517] iommu: Default domain type: Translated [ 0.400585] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400990] SCSI subsystem initialized [ 0.401129] usbcore: registered new interface driver usbfs [ 0.401171] usbcore: registered new interface driver hub [ 0.401202] usbcore: registered new device driver usb [ 0.401606] mc: Linux media interface: v0.10 [ 0.401633] videodev: Linux video capture interface: v2.00 [ 0.401950] pps_core: LinuxPPS API ver. 1 registered [ 0.401963] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401983] PTP clock support registered [ 0.402190] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.402550] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.402632] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.403217] Registered efivars operations [ 0.409134] FPGA manager framework [ 0.409236] Advanced Linux Sound Architecture Driver Initialized. [ 0.409860] Bluetooth: Core ver 2.22 [ 0.409898] NET: Registered protocol family 31 [ 0.409909] Bluetooth: HCI device and connection manager initialized [ 0.409946] Bluetooth: HCI socket layer initialized [ 0.409962] Bluetooth: L2CAP socket layer initialized [ 0.409983] Bluetooth: SCO socket layer initialized [ 0.411809] camchar: rtcpu character device driver loaded [ 0.412561] clocksource: Switched to clocksource arch_sys_counter [ 0.706310] VFS: Disk quotas dquot_6.6.0 [ 0.706396] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.706728] pnp: PnP ACPI: disabled [ 0.718245] la/ptsa driver initialized. [ 0.718396] NET: Registered protocol family 2 [ 0.718551] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.723908] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.724048] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.724291] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.724754] TCP: Hash tables configured (established 65536 bind 65536) [ 0.724904] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.725017] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.725216] NET: Registered protocol family 1 [ 0.726122] RPC: Registered named UNIX socket transport module. [ 0.726148] RPC: Registered udp transport module. [ 0.726162] RPC: Registered tcp transport module. [ 0.726176] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.726215] PCI: CLS 0 bytes, default 64 [ 0.726530] Trying to unpack rootfs image as initramfs... [ 0.925437] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.927513] Freeing initrd memory: 8196K [ 0.931848] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.931886] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.931938] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.932327] kvm [1]: IPA Size Limit: 40 bits [ 0.932870] kvm [1]: vgic interrupt IRQ9 [ 0.933473] kvm [1]: VHE mode initialized successfully [ 0.935166] Initialise system trusted keyrings [ 0.935521] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.941698] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.942525] NFS: Registering the id_resolver key type [ 0.942596] Key type id_resolver registered [ 0.942611] Key type id_legacy registered [ 0.942723] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.942750] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.942819] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.952463] NET: Registered protocol family 38 [ 0.952487] Key type asymmetric registered [ 0.952529] Asymmetric key parser 'x509' registered [ 0.952574] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.952821] io scheduler mq-deadline registered [ 0.952838] io scheduler kyber registered [ 0.958889] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.962064] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.962146] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.962223] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.962294] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.962363] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.967805] scrncapt: init (heads:4 wins:6 planes:4) [ 0.968129] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.969102] EINJ: ACPI disabled. [ 0.972340] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.972366] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 0.972381] tegra-pmc: ### PMC reset level: L1 [ 0.972427] tegra-pmc: ### PMC reset status reg: 0x9 [ 0.972561] tegra-pmc: PMC Prod config success [ 0.977636] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.982548] random: fast init done [ 0.983208] printk: console [ttyTCU0] enabled [ 2.534747] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.539418] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.544043] arm-smmu 10000000.iommu: stage 1 translation [ 2.549168] arm-smmu 10000000.iommu: stage 2 translation [ 2.554927] arm-smmu 10000000.iommu: nested translation [ 2.560005] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.567180] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.578186] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.580827] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.587128] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.594868] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.600426] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.605150] arm-smmu 12000000.iommu: stage 1 translation [ 2.610657] arm-smmu 12000000.iommu: stage 2 translation [ 2.615826] arm-smmu 12000000.iommu: nested translation [ 2.621258] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.628434] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.639102] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.641555] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.648371] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.655466] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.665576] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.668545] tegra_profiler: auth: init [ 2.672817] THERMAL EST: found 3 subdevs [ 2.676436] THERMAL EST num_resources: 0 [ 2.680059] [THERMAL EST subdev 0] [ 2.683639] [THERMAL EST subdev 1] [ 2.686789] [THERMAL EST subdev 2] [ 2.690316] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.696852] THERMAL EST: thz register success. [ 2.701017] THERMAL EST: end of probe, return err: 0 [ 2.706017] nvsciipc: loaded module [ 2.713316] tun: Universal TUN/TAP device driver, 1.6 [ 2.715760] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.721802] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.727607] e1000e: Intel(R) PRO/1000 Network Driver [ 2.732289] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.738372] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.743930] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.750227] PPP generic driver version 2.4.2 [ 2.754106] PPP BSD Compression module registered [ 2.758899] PPP Deflate Compression module registered [ 2.764144] PPP MPPE Compression module registered [ 2.769156] usbcore: registered new interface driver r8152 [ 2.774409] usbcore: registered new interface driver asix [ 2.779997] usbcore: registered new interface driver ax88179_178a [ 2.786128] usbcore: registered new interface driver cdc_ether [ 2.791816] usbcore: registered new interface driver net1080 [ 2.797417] usbcore: registered new interface driver cdc_subset [ 2.803712] usbcore: registered new interface driver zaurus [ 2.809412] usbcore: registered new interface driver cdc_ncm [ 2.815095] usbcore: registered new interface driver aqc111 [ 2.820468] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.826798] ohci-pci: OHCI PCI platform driver [ 2.830841] ohci-platform: OHCI generic platform driver [ 2.836758] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.843285] usbcore: registered new interface driver uas [ 2.847423] usbcore: registered new interface driver usb-storage [ 2.853285] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.859542] mousedev: PS/2 mouse device common for all mice [ 2.864294] usbcore: registered new interface driver xpad [ 2.872629] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.875264] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.883084] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.889666] i2c /dev entries driver [ 2.892982] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.898786] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.903919] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.909206] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.914526] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.920085] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.925523] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.938986] device-mapper: uevent: version 1.0.3 [ 2.939442] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.946331] cpuidle: Initializing cpuidle driver [ 2.949919] sdhci: Secure Digital Host Controller Interface driver [ 2.954647] sdhci: Copyright(c) Pierre Ossman [ 2.958995] Synopsys Designware Multimedia Card Interface Driver [ 2.964940] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.970960] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.971758] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.984192] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.006911] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.016382] vdd-1v0: supplied by regulator-dummy [ 3.022013] vdd-1v8-hs: supplied by regulator-dummy [ 3.026878] vdd-1v8-ls: supplied by regulator-dummy [ 3.031757] vdd-1v8-ao: supplied by regulator-dummy [ 3.035840] vddio-ddr-1v1: supplied by regulator-dummy [ 3.040349] vdd-rtc: supplied by regulator-dummy [ 3.042179] spmic-ldo1: supplied by regulator-dummy [ 3.043479] vdd-ao-3v3: supplied by regulator-dummy [ 3.049791] vddio-emmc-3v3: supplied by regulator-dummy [ 3.056110] spmic-ldo4: supplied by regulator-dummy [ 3.057438] vdd-usb-3v3: supplied by regulator-dummy [ 3.063730] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.069983] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.075640] spmic-ldo8: supplied by vdd-1v8-ls [ 3.077171] gpio-510 (gpio_default): hogged as output/high [ 3.078548] gpio-511 (gpio_default): hogged as output/high [ 3.081733] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.217480] max77686-rtc max77620-rtc: registered as rtc0 [ 3.218582] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.218951] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.050000] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.051261] hid: raw HID events driver (C) Jiri Kosina [ 4.051955] usbcore: registered new interface driver usbhid [ 4.052108] usbhid: USB HID core driver [ 4.054040] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.055137] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.014843] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.089911] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.878 ms) ÿá[ 4.139830] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.140436] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.141533] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.142237] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.144110] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.144852] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.145443] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.147015] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.147384] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.149329] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.156241] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.162732] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.167919] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.174431] denver_knobs_init:MTS_VERSION:55637613 [ 4.186781] t19x_cache tegra-cache: probed [ 4.189490] optee: probing for conduit method. [ 4.190372] optee: revision 3.16 (65cc2218) [ 4.191299] optee: dynamic shared memory is enabled [ 4.194860] optee: initialized driver [ 4.200923] nvpmodel: initialized successfully [ 4.202334] tegra_hv: get_hvd: not initialized yet [ 4.207042] user_ivc_mempool: hypervisor not present [ 4.213269] usbcore: registered new interface driver snd-usb-audio [ 4.219608] u32 classifier [ 4.221197] input device check on [ 4.224768] Actions configured [ 4.228135] Initializing XFRM netlink socket [ 4.232997] NET: Registered protocol family 10 [ 4.239281] Segment Routing with IPv6 [ 4.240400] NET: Registered protocol family 17 [ 4.244933] NET: Registered protocol family 15 [ 4.249107] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.262684] Bluetooth: RFCOMM socket layer initialized [ 4.267374] Bluetooth: RFCOMM ver 1.11 [ 4.271530] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.277141] Bluetooth: HIDP socket layer initialized [ 4.283185] 9pnet: Installing 9P2000 support [ 4.286816] Key type dns_resolver registered [ 4.291636] registered taskstats version 1 [ 4.295260] Loading compiled-in X.509 certificates [ 4.307512] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.310971] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.321211] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.322890] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.331778] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.339965] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.456559] tegra194-pcie 14160000.pcie: Link up [ 4.459370] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.459567] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.459701] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.459904] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.460068] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.460378] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.460828] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.472336] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.473040] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.473557] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.475109] pci 0004:01:00.0: supports D1 D2 [ 4.475268] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.484060] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.484365] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.484677] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.485112] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.485380] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.485530] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.491215] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.498548] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.507475] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.517417] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.522221] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.527457] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.534333] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.543859] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.545102] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.553562] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.562558] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.668719] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.669354] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.669587] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.669716] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.669954] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.670120] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.670443] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.670815] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.688288] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.688747] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.690552] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.691721] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.693343] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.694792] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.695631] pci 0005:00:00.0: Removing from iommu group 7 [ 5.695918] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.726622] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.748196] host1x 13e10000.host1x: initialized [ 5.750048] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.751111] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.752721] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.753587] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.754655] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.755347] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.756815] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.757437] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.762120] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.768929] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.779299] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.786593] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.796069] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.803196] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.812798] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.819713] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.829539] falcon 15340000.vic: Adding to iommu group 17 [ 5.843742] falcon 15340000.vic: initialized [ 5.844830] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.850382] falcon 15380000.nvjpg: initialized [ 5.851053] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.862577] falcon 154c0000.nvenc: initialized [ 5.863132] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.872467] falcon 15a80000.nvenc1: initialized [ 5.873143] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.885163] nvdec 15480000.nvdec: initialized [ 5.885791] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.895116] nvdec 15140000.nvdec1: initialized [ 5.895683] tsec 15500000.tsec: Adding to iommu group 18 [ 5.901164] tsec 15500000.tsec: initialized [ 5.901691] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.909761] tsec 15100000.tsecb: initialized [ 5.913629] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.938643] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.951095] gpio-374 (wifi-enable): hogged as output/high [ 5.951409] gpio-431 (camera-control-output-low): hogged as output/low [ 5.951658] gpio-432 (camera-control-output-low): hogged as output/low [ 5.953273] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.954678] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.955201] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.960933] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.966274] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.972170] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.977719] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.986388] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.993505] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.004362] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.010233] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.016058] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.024613] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.034153] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.041124] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.048856] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.054933] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.064786] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.070870] pva 16000000.pva0: Adding to iommu group 22 [ 6.097266] pva 16000000.pva0: initialized [ 6.101776] pva 16800000.pva1: Adding to iommu group 23 [ 6.112407] pva 16800000.pva1: initialized [ 6.116193] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.128143] nvdla 15880000.nvdla0: initialized [ 6.129457] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.137885] nvdla 158c0000.nvdla1: initialized [ 6.141695] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.141942] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.141984] tegradc 15200000.display: Adding to iommu group 26 [ 6.142214] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.142613] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.142729] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.143038] tegradccommon 15200000.display-hub: dma mapping done [ 6.149168] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.151223] tegradc 15210000.display: Adding to iommu group 26 [ 6.166457] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.171831] tegra_cec 3960000.tegra_cec: probed [ 6.177423] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.184654] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.189637] kfuse 3830000.kfuse: initialized [ 6.194250] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.200157] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.206825] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.213333] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.222489] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.227873] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.237550] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.242828] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.262889] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.263253] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.265989] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.273899] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.282817] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.289002] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.297061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.303911] usb usb1: Product: xHCI Host Controller [ 6.308881] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.315181] usb usb1: SerialNumber: 3610000.xhci [ 6.321002] hub 1-0:1.0: USB hub found [ 6.323737] hub 1-0:1.0: 4 ports detected [ 6.328406] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.333175] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.341021] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.348727] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.356578] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.363567] usb usb2: Product: xHCI Host Controller [ 6.368829] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.375062] usb usb2: SerialNumber: 3610000.xhci [ 6.380283] hub 2-0:1.0: USB hub found [ 6.383493] hub 2-0:1.0: 4 ports detected [ 6.421295] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.426480] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.427695] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.427874] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.441109] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.442178] tegra194-cpufreq ccplex: probed with BWMGR [ 6.443370] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.443992] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.444557] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.445847] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.459005] mmc0: CQHCI version 5.10 [ 6.460357] tegra194-vi5 15c10000.vi: initialized [ 6.462518] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.463896] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.467147] generic_infoframe_type: 0x87 [ 6.473754] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.477294] tegradc 15200000.display: DT parsed successfully [ 6.485385] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.491241] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.497698] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.497704] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.497709] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.525453] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.526696] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.531962] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.539980] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.546804] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.552575] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.554872] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.578580] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.579281] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.580555] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.583373] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.598018] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.604096] nvethernet 2490000.ethernet: Macsec not supported [ 6.605450] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.616283] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.621831] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.628609] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.636120] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.644048] tegradc 15200000.display: probed [ 6.649771] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.669370] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.675672] tegra-se-nvhost 15810000.se: initialized [ 6.681940] mmc0: Command Queue Engine enabled [ 6.683437] mmc0: periodic cache flush enabled [ 6.684874] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.687695] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.694785] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.701221] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.711868] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.711981] Console: switching to colour frame buffer device 240x67 [ 6.712368] tegra-se-nvhost 15820000.se: initialized [ 6.718921] tegradc 15200000.display: fb registered [ 6.722693] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.726829] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.730011] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.735088] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.743430] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.766978] tegra-se-nvhost 15830000.se: initialized [ 6.767113] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.771935] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.773075] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.773589] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.778252] tegra-se-nvhost 15840000.se: initialized [ 6.785695] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.793642] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.798269] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.798278] usb 1-2: Manufacturer: Generic [ 6.804632] tegra_actmon d230000.actmon: in actmon_register()... [ 6.813124] hub 1-2:1.0: USB hub found [ 6.817102] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.822980] hub 1-2:1.0: 4 ports detected [ 6.825970] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.838374] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.841741] hvc_sysfs: hypervisor is not present [ 6.846201] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.874515] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.874549] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.899626] ALSA device list: [ 6.899762] No soundcards found. [ 6.900680] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.903147] Extcon AUX1(HDMI) enable [ 6.906905] tegradc 15210000.display: disp1 connected to head1->sor [ 6.912822] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.920337] tegradc 15210000.display: DT parsed successfully [ 6.926108] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.932432] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.934195] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.942278] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.942282] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.942286] usb 2-3: Manufacturer: Generic [ 6.952917] hub 2-3:1.0: USB hub found [ 6.955584] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.962293] hub 2-3:1.0: 4 ports detected [ 6.971128] tegradc 15210000.display: probed [ 6.983276] tegradc 15210000.display: fb registered [ 6.991700] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.995572] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.997423] Freeing unused kernel memory: 3968K [ 7.003277] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.013125] tegradc 15210000.display: blank - powerdown [ 7.018156] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.020643] Run /init as init process [ 7.026541] Extcon DP: HPD disabled [ 7.026546] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.026574] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.033544] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.044560] usb 1-3: new full-speed USB device number 3 using tegra-xusb ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.061972] tegradc 15200000.display: blank - powerdown [ 7.105453] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.105458] Extcon AUX1(HDMI) disable [ 7.129096] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.130014] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.143308] tegradc 15200000.display: unblank [ 7.144629] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.144830] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.151222] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.153080] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.157094] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.157098] Extcon AUX1(HDMI) enable [ 7.169872] tegradc 15200000.display: sync windows ret = 247 [ 7.193800] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.195360] Extcon HDMI: HPD enabled [ 7.196860] tegradc 15200000.display: hdmi: plugged [ 7.201915] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.203415] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.203438] random: crng init done [ 7.204870] usb 1-3: Product: Bluetooth Radio [ 7.207597] usb 1-3: Manufacturer: Realtek [ 7.208575] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.208911] usb 1-3: SerialNumber: 00e04c000001 [ 7.253447] Root device found: mmcblk0p1 [ 7.256818] Found dev node: /dev/mmcblk0p1 [ 7.273114] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.274511] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.295541] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.300954] Rootfs mounted over mmcblk0p1 [ 7.330572] Switching from initrd to actual rootfs [ 7.486429] systemd[1]: System time before build time, advancing clock. [ 7.558051] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.562967] systemd[1]: Detected architecture arm64. [ 7.598912] systemd[1]: Set hostname to . [ 7.762379] systemd-sysv-generator[244]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.105825] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.107594] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.113247] systemd[1]: Created slice system-modprobe.slice. [ 8.117876] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.121982] systemd[1]: Created slice User and Session Slice. [ 8.125454] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.129505] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.132818] systemd[1]: Reached target User and Group Name Lookups. [ 8.135947] systemd[1]: Reached target Slices. [ 8.138968] systemd[1]: Reached target Swap. [ 8.142891] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.146503] systemd[1]: Listening on Syslog Socket. [ 8.150002] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.153311] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.157707] systemd[1]: Listening on Journal Audit Socket. [ 8.161293] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.165057] systemd[1]: Listening on Journal Socket. [ 8.168680] systemd[1]: Listening on udev Control Socket. [ 8.172132] systemd[1]: Listening on udev Kernel Socket. [ 8.181622] systemd[1]: Mounting Huge Pages File System... [ 8.191268] systemd[1]: Mounting POSIX Message Queue File System... [ 8.199684] systemd[1]: Mounting RPC Pipe File System... [ 8.208408] systemd[1]: Mounting Kernel Debug File System... [ 8.217257] systemd[1]: Mounting Kernel Trace File System... [ 8.227322] systemd[1]: Starting Journal Service... [ 8.236307] systemd[1]: Starting Set the console keyboard layout... [ 8.244787] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.248269] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.254659] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.262723] systemd[1]: Started Nameserver information manager. [ 8.267354] systemd[1]: Reached target Network (Pre). [ 8.274752] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.274985] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.284494] systemd[1]: Starting Load Kernel Modules... [ 8.293397] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.301783] systemd[1]: Starting udev Coldplug all Devices... [ 8.313306] systemd[1]: Mounted Huge Pages File System. [ 8.317100] systemd[1]: Mounted POSIX Message Queue File System. [ 8.320709] systemd[1]: Mounted RPC Pipe File System. [ 8.321520] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.326671] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.328891] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.329094] systemd[1]: Mounted Kernel Debug File System. [ 8.330406] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.333286] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.333290] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.333496] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.333719] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.333893] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.333901] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.345071] systemd[1]: Mounted Kernel Trace File System. [ 8.353320] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.359822] systemd[1]: nvfb-udev.service: Succeeded. [ 8.364180] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.376380] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.388845] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.390564] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.398943] systemd[1]: Starting Load/Save Random Seed... [ 8.407824] systemd[1]: Starting Create System Users... [ 8.435785] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.435785] [ 8.456336] systemd[1]: Finished Load/Save Random Seed. [ 8.465617] systemd[1]: Finished Load Kernel Modules. [ 8.476080] systemd[1]: Finished Create System Users. [ 8.480566] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.487374] systemd[1]: Mounting Kernel Configuration File System... [ 8.495256] systemd[1]: Started OP-TEE Client Supplicant. [ 8.504491] systemd[1]: Starting Apply Kernel Variables... [ 8.512404] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.521524] systemd[1]: Mounted Kernel Configuration File System. [ 8.530589] systemd[1]: Finished Set the console keyboard layout. [ 10.000549] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.005720] imx219 9-0010: board setup failed [ 10.007624] imx219: probe of 9-0010 failed with error -121 [ 10.041851] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.056964] imx219 10-0010: board setup failed [ 10.058739] imx219: probe of 10-0010 failed with error -121 [ 10.171804] hot-surface-alert cooling state: 0 -> 1 [ 10.882454] using random self ethernet address [ 10.884105] using random host ethernet address [ 11.624991] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.626850] Creating 1 MTD partitions on "spi6.0": [ 11.628758] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.419619] using random self ethernet address [ 12.421298] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.861584] nvidia: loading out-of-tree module taints kernel. [ 58.550512] watchdog: watchdog0: watchdog did not stop! [ 59.013521] Trying to unregister non-registered hwtime source [ 62.072455] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.074629] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.311] I> sdmmc DDR50 mode [0001.328] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.346] W> Cannot find any partition table for 00000003 [0001.347] > PARTITION_MANAGER: Failed to publish partition. [0001.363] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.364] I> Active Boot chain : 0 [0002.035] I> Relocating BR-BCT [0002.036] > DEVICE_PROD: device prod is not initialized. [0002.342] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.343] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.343] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.344] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.344] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.344] I> dram_block larger than 80000000 [0002.347] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.358] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.362] I> found decompressor handler: lz4 [0002.590] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.591] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 clk_early initialized ÿäI/TCÿâmail_early initialized ÿä: ÿâfuse initialized hwwdt initialized ÿäNon-ÿât194_ec_get_ec_list: found 45 ecs ÿäsecure exteÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿärnaÿâadc initialized ÿälÿâfmon_populate_monitors: found 73 monitors ÿä DT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 03ÿâclk_dt_late initialized noc_late initialized ÿä:ÿâpm_post initialized dbells initialized ÿä23:ÿâdmce initialized ÿä2ÿâcvc initialized ÿä0 UTC 2022 aÿâavfs_clk_mach_post initialized ÿäarchÿâavfs_clk_platform_post initialized ÿä64 ÿâcvc_late initialized regulator_post initialized ÿä I/ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäTC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.617] E> invalid display type [0003.618] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.647] I> edid read success [0003.647] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.648] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.649] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.681] I> width = 720, height = 480, frequency = 26973026 [0003.686] I> width = 720, height = 576, frequency = 26973026 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 4096, height = 2160, frequency = 296703296 [0003.721] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.732] I> hdmi_enable, starting HDMI initialisation [0003.737] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.747] calling apps_init() [0003.748] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000706] Console: colour dummy device 80x25 [ 0.002060] printk: console [tty0] enabled [ 0.002138] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002174] pid_max: default: 32768 minimum: 301 [ 0.002368] LSM: Security Framework initializing [ 0.002427] Yama: becoming mindful. [ 0.002468] SELinux: Initializing. [ 0.002688] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002726] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005892] rcu: Hierarchical SRCU implementation. [ 0.006183] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006865] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006915] DTB Build time: Aug 10 2022 20:31:49 [ 0.009621] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009886] Remapping and enabling EFI services. [ 0.011882] smp: Bringing up secondary CPUs ... [ 0.044083] Detected PIPT I-cache on CPU1 [ 0.044157] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073956] Detected PIPT I-cache on CPU2 [ 0.074054] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103716] Detected PIPT I-cache on CPU3 [ 0.103808] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133702] Detected PIPT I-cache on CPU4 [ 0.133909] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163642] Detected PIPT I-cache on CPU5 [ 0.163787] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164167] smp: Brought up 1 node, 6 CPUs [ 0.164392] SMP: Total of 6 processors activated. [ 0.164454] CPU features: detected: Privileged Access Never [ 0.164483] CPU features: detected: LSE atomic instructions [ 0.164504] CPU features: detected: User Access Override [ 0.164543] CPU features: detected: 32-bit EL0 Support [ 0.164571] CPU features: detected: RAS Extension Support [ 0.164591] CPU features: detected: CRC32 instructions [ 0.164629] CPU features: detected: 32-bit EL1 Support [ 0.235532] CPU: All CPU(s) started at EL2 [ 0.242890] devtmpfs: initialized [ 0.290105] Registered cp15_barrier emulation handler [ 0.290286] Registered setend emulation handler [ 0.290306] KASLR enabled [ 0.290579] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.290603] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291954] pinctrl core: initialized pinctrl subsystem [ 0.293008] SMBIOS 3.0.0 present. [ 0.293037] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.293640] NET: Registered protocol family 16 [ 0.295579] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296080] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296785] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296840] audit: initializing netlink subsys (disabled) [ 0.297108] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.297531] thermal_sys: Registered thermal governor 'step_wise' [ 0.297538] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297554] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299729] cpuidle: using governor menu [ 0.300051] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300463] ASID allocator initialised with 32768 entries [ 0.300689] Serial: AMBA PL011 UART driver [ 0.303677] Tegra reboot handler registered. [ 0.376188] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.376306] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.376478] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376526] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376678] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376739] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376854] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.376902] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.377018] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.377064] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379195] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379230] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.379260] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379288] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379318] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379354] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379395] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379429] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379455] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379500] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379525] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379552] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379576] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379601] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379626] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379650] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379675] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.379764] mc-err: mcerr ops are set to t19x [ 0.392300] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392322] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.392335] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392350] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399288] ACPI: Interpreter disabled. [ 0.400475] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.401802] iommu: Default domain type: Translated [ 0.401866] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.402231] SCSI subsystem initialized [ 0.402404] usbcore: registered new interface driver usbfs [ 0.402451] usbcore: registered new interface driver hub [ 0.402485] usbcore: registered new device driver usb [ 0.402877] mc: Linux media interface: v0.10 [ 0.402905] videodev: Linux video capture interface: v2.00 [ 0.403197] pps_core: LinuxPPS API ver. 1 registered [ 0.403208] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403228] PTP clock support registered [ 0.403478] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.403794] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.403896] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.404459] Registered efivars operations [ 0.410115] FPGA manager framework [ 0.410225] Advanced Linux Sound Architecture Driver Initialized. [ 0.410832] Bluetooth: Core ver 2.22 [ 0.410894] NET: Registered protocol family 31 [ 0.410906] Bluetooth: HCI device and connection manager initialized [ 0.410921] Bluetooth: HCI socket layer initialized [ 0.410955] Bluetooth: L2CAP socket layer initialized [ 0.410977] Bluetooth: SCO socket layer initialized [ 0.412514] camchar: rtcpu character device driver loaded [ 0.413193] clocksource: Switched to clocksource arch_sys_counter [ 0.758748] VFS: Disk quotas dquot_6.6.0 [ 0.758813] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.759152] pnp: PnP ACPI: disabled [ 0.771624] la/ptsa driver initialized. [ 0.771776] NET: Registered protocol family 2 [ 0.771945] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.776483] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.776621] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.776865] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.777324] TCP: Hash tables configured (established 65536 bind 65536) [ 0.777438] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.777528] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.777712] NET: Registered protocol family 1 [ 0.778236] RPC: Registered named UNIX socket transport module. [ 0.778250] RPC: Registered udp transport module. [ 0.778260] RPC: Registered tcp transport module. [ 0.778269] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.778283] PCI: CLS 0 bytes, default 64 [ 0.778483] Trying to unpack rootfs image as initramfs... [ 0.966222] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.968320] Freeing initrd memory: 8196K [ 0.972398] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.972430] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.972457] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.972790] kvm [1]: IPA Size Limit: 40 bits [ 0.973333] kvm [1]: vgic interrupt IRQ9 [ 0.973800] kvm [1]: VHE mode initialized successfully [ 0.975078] Initialise system trusted keyrings [ 0.975327] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.980245] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.980993] NFS: Registering the id_resolver key type [ 0.981020] Key type id_resolver registered [ 0.981029] Key type id_legacy registered [ 0.981121] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.981140] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.981284] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.990833] NET: Registered protocol family 38 [ 0.990854] Key type asymmetric registered [ 0.990865] Asymmetric key parser 'x509' registered [ 0.990928] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.991155] io scheduler mq-deadline registered [ 0.991168] io scheduler kyber registered [ 0.996136] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.998591] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.998664] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.998737] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.998807] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.998857] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.003677] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.003705] scrncapt: init (heads:4 wins:6 planes:4) [ 1.004664] EINJ: ACPI disabled. [ 1.007355] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.007375] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.007385] tegra-pmc: ### PMC reset level: L1 [ 1.007394] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.007432] tegra-pmc: PMC Prod config success [ 1.012153] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.138167] random: fast init done [ 1.139773] printk: console [ttyTCU0] enabled [ 2.568848] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.573866] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.578075] arm-smmu 10000000.iommu: stage 1 translation [ 2.583842] arm-smmu 10000000.iommu: stage 2 translation [ 2.589347] arm-smmu 10000000.iommu: nested translation [ 2.594703] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.601608] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.612041] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.614737] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.621564] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.629077] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.634591] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.639308] arm-smmu 12000000.iommu: stage 1 translation [ 2.644816] arm-smmu 12000000.iommu: stage 2 translation [ 2.650244] arm-smmu 12000000.iommu: nested translation [ 2.655672] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.662856] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.672581] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.675717] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.682551] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.689912] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.699287] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.702702] tegra_profiler: auth: init [ 2.706910] THERMAL EST: found 3 subdevs [ 2.710372] THERMAL EST num_resources: 0 [ 2.714212] [THERMAL EST subdev 0] [ 2.717792] [THERMAL EST subdev 1] [ 2.721205] [THERMAL EST subdev 2] [ 2.724437] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.730554] THERMAL EST: thz register success. [ 2.735146] THERMAL EST: end of probe, return err: 0 [ 2.740136] nvsciipc: loaded module [ 2.746800] tun: Universal TUN/TAP device driver, 1.6 [ 2.749778] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.756209] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.761778] e1000e: Intel(R) PRO/1000 Network Driver [ 2.766449] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.772520] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.778082] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.783923] PPP generic driver version 2.4.2 [ 2.788271] PPP BSD Compression module registered [ 2.793060] PPP Deflate Compression module registered [ 2.798308] PPP MPPE Compression module registered [ 2.803313] usbcore: registered new interface driver r8152 [ 2.808832] usbcore: registered new interface driver asix [ 2.814151] usbcore: registered new interface driver ax88179_178a [ 2.820015] usbcore: registered new interface driver cdc_ether [ 2.826224] usbcore: registered new interface driver net1080 [ 2.831566] usbcore: registered new interface driver cdc_subset [ 2.837616] usbcore: registered new interface driver zaurus [ 2.843297] usbcore: registered new interface driver cdc_ncm [ 2.849243] usbcore: registered new interface driver aqc111 [ 2.854884] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.860724] ohci-pci: OHCI PCI platform driver [ 2.865267] ohci-platform: OHCI generic platform driver [ 2.870752] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.877303] usbcore: registered new interface driver uas [ 2.881564] usbcore: registered new interface driver usb-storage [ 2.887396] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.893369] mousedev: PS/2 mouse device common for all mice [ 2.898707] usbcore: registered new interface driver xpad [ 2.906605] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.909213] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.917243] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.923417] i2c /dev entries driver [ 2.927099] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.932565] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.938241] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.943613] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.948698] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.954188] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.959855] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.971279] device-mapper: uevent: version 1.0.3 [ 2.971686] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.979526] cpuidle: Initializing cpuidle driver [ 2.984043] sdhci: Secure Digital Host Controller Interface driver [ 2.989061] sdhci: Copyright(c) Pierre Ossman [ 2.992898] Synopsys Designware Multimedia Card Interface Driver [ 2.999306] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.004967] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.011223] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.018328] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.036788] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.045629] vdd-1v0: supplied by regulator-dummy [ 3.050959] vdd-1v8-hs: supplied by regulator-dummy [ 3.055658] vdd-1v8-ls: supplied by regulator-dummy [ 3.060285] vdd-1v8-ao: supplied by regulator-dummy [ 3.064103] vddio-ddr-1v1: supplied by regulator-dummy [ 3.068396] vdd-rtc: supplied by regulator-dummy [ 3.070011] spmic-ldo1: supplied by regulator-dummy [ 3.071096] vdd-ao-3v3: supplied by regulator-dummy [ 3.077168] vddio-emmc-3v3: supplied by regulator-dummy [ 3.083376] spmic-ldo4: supplied by regulator-dummy [ 3.084528] vdd-usb-3v3: supplied by regulator-dummy [ 3.090605] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.096663] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.102242] spmic-ldo8: supplied by vdd-1v8-ls [ 3.103603] gpio-510 (gpio_default): hogged as output/high [ 3.105290] gpio-511 (gpio_default): hogged as output/high [ 3.111846] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.250487] max77686-rtc max77620-rtc: registered as rtc0 [ 3.251706] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.251982] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.946532] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.947441] hid: raw HID events driver (C) Jiri Kosina [ 3.948082] usbcore: registered new interface driver usbhid [ 3.948254] usbhid: USB HID core driver [ 3.949927] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.950970] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.979492] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.055266] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.584 ms) ÿá[ 4.036426] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.036948] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.038076] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.038672] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.040211] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.040786] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.041334] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.042335] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.042649] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.044512] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.052546] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.059325] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.063763] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.071246] denver_knobs_init:MTS_VERSION:55637613 [ 4.083136] t19x_cache tegra-cache: probed [ 4.085685] optee: probing for conduit method. [ 4.086489] optee: revision 3.16 (65cc2218) [ 4.087419] optee: dynamic shared memory is enabled [ 4.091486] optee: initialized driver [ 4.098268] nvpmodel: initialized successfully [ 4.099151] tegra_hv: get_hvd: not initialized yet [ 4.103896] user_ivc_mempool: hypervisor not present [ 4.110144] usbcore: registered new interface driver snd-usb-audio [ 4.116350] u32 classifier [ 4.117723] input device check on [ 4.121296] Actions configured [ 4.124688] Initializing XFRM netlink socket [ 4.129569] NET: Registered protocol family 10 [ 4.135923] Segment Routing with IPv6 [ 4.137332] NET: Registered protocol family 17 [ 4.141463] NET: Registered protocol family 15 [ 4.145591] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.159293] Bluetooth: RFCOMM socket layer initialized [ 4.164187] Bluetooth: RFCOMM ver 1.11 [ 4.167820] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.173923] Bluetooth: HIDP socket layer initialized [ 4.179214] 9pnet: Installing 9P2000 support [ 4.183321] Key type dns_resolver registered [ 4.188296] registered taskstats version 1 [ 4.191469] Loading compiled-in X.509 certificates [ 4.204191] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.207495] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.217311] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.219695] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.228025] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.236719] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.353230] tegra194-pcie 14160000.pcie: Link up [ 4.355929] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.356111] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.356246] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.356441] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.356600] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.356918] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.357360] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.367321] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.368060] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.368494] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.369976] pci 0004:01:00.0: supports D1 D2 [ 4.370223] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.379452] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.379952] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.380155] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.380557] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.380796] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.382097] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.387777] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.395164] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.403840] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.414240] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.418696] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.424494] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.431012] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.440044] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.441937] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.450152] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.458952] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.565366] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.565946] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.566221] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.566350] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.566595] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.566754] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.567060] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.567473] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.584002] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.584326] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.586427] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.587812] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.589920] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.591289] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.592198] pci 0005:00:00.0: Removing from iommu group 7 [ 5.592447] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.620725] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.640897] host1x 13e10000.host1x: initialized [ 5.642459] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.643309] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.644428] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.645048] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.646187] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.646690] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.647614] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.648506] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.658374] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.665584] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.675605] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.682304] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.692373] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.699720] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.709611] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.716613] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.726298] falcon 15340000.vic: Adding to iommu group 17 [ 5.740625] falcon 15340000.vic: initialized [ 5.741764] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.747386] falcon 15380000.nvjpg: initialized [ 5.748033] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.758883] falcon 154c0000.nvenc: initialized [ 5.759400] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.768940] falcon 15a80000.nvenc1: initialized [ 5.769521] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.781008] nvdec 15480000.nvdec: initialized [ 5.781714] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.791630] nvdec 15140000.nvdec1: initialized [ 5.792132] tsec 15500000.tsec: Adding to iommu group 18 [ 5.797839] tsec 15500000.tsec: initialized [ 5.798262] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.806455] tsec 15100000.tsecb: initialized [ 5.810215] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.835385] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.847392] gpio-374 (wifi-enable): hogged as output/high [ 5.847889] gpio-431 (camera-control-output-low): hogged as output/low [ 5.848237] gpio-432 (camera-control-output-low): hogged as output/low [ 5.850074] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.851589] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.852211] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.857728] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.862688] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.868869] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.874524] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.882970] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.890003] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.901587] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.906768] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.912652] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.921507] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.930689] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.938045] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.945304] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.951809] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.961102] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.967440] pva 16000000.pva0: Adding to iommu group 22 [ 5.994433] pva 16000000.pva0: initialized [ 5.998739] pva 16800000.pva1: Adding to iommu group 23 [ 6.009335] pva 16800000.pva1: initialized [ 6.012900] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.032276] nvdla 15880000.nvdla0: initialized [ 6.033649] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.043076] nvdla 158c0000.nvdla1: initialized [ 6.046858] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.047206] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.047681] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.047938] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.048012] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.048111] tegradccommon 15200000.display-hub: dma mapping done [ 6.048569] tegradc 15200000.display: Adding to iommu group 26 [ 6.049401] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.049947] tegradc 15210000.display: Adding to iommu group 26 [ 6.059012] tegradc 15210000.display: disp0 connected to head1->sor [ 6.063369] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.069796] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.074816] tegra_cec 3960000.tegra_cec: probed [ 6.075845] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.082670] tegradc 15210000.display: DT parsed successfully [ 6.089369] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.092731] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.099007] kfuse 3830000.kfuse: initialized [ 6.105938] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.113764] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.117537] generic_infoframe_type: 0x87 [ 6.123786] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.124433] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.130018] tegradc 15200000.display: DT parsed successfully [ 6.135011] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.140921] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.148285] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.175702] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.176444] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.183357] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.193869] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.200179] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.214503] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.215029] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.220147] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.235460] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.247219] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.255965] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.256624] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.261063] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.276234] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.276853] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.292515] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.298638] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.306250] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.313799] usb usb1: Product: xHCI Host Controller [ 6.318729] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.324844] usb usb1: SerialNumber: 3610000.xhci [ 6.330670] hub 1-0:1.0: USB hub found [ 6.333320] hub 1-0:1.0: 4 ports detected [ 6.337839] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.343077] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.350528] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.357951] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.366106] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.373332] usb usb2: Product: xHCI Host Controller [ 6.378095] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.384268] usb usb2: SerialNumber: 3610000.xhci [ 6.390062] hub 2-0:1.0: USB hub found [ 6.393048] hub 2-0:1.0: 4 ports detected [ 6.432972] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.439250] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.440489] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.440759] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.453628] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1904000 KHz, changing to: 1907200 KHz [ 6.454661] tegra194-cpufreq ccplex: probed with BWMGR [ 6.455883] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.456708] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.457232] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.458736] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.468126] mmc0: CQHCI version 5.10 [ 6.469078] tegra194-vi5 15c10000.vi: initialized [ 6.471433] tegradc 15210000.display: disp0 connected to head1->sor [ 6.472786] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.476492] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.483143] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.490224] tegradc 15210000.display: DT parsed successfully [ 6.498105] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.498485] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.503779] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.509948] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.517830] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.525530] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.532248] generic_infoframe_type: 0x87 [ 6.539079] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.545396] tegradc 15200000.display: DT parsed successfully [ 6.557288] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.561525] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.568113] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.582857] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.582867] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.591192] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.591196] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.605242] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.606437] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.607622] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.607674] nvethernet 2490000.ethernet: Macsec not supported [ 6.608848] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.610043] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.610163] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.610308] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.611406] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.612947] tegra-se-nvhost 15810000.se: initialized [ 6.618143] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.621290] tegradc 15200000.display: vpulse3 syncpt # 13 for dc 0 [ 6.621533] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.627799] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.635863] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.641726] tegra-se-nvhost 15820000.se: initialized [ 6.645524] mmc0: Command Queue Engine enabled [ 6.645528] mmc0: periodic cache flush enabled [ 6.645556] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.646008] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.646133] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.648333] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.649928] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.650531] tegradc 15200000.display: probed [ 6.656576] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.775092] Console: switching to colour frame buffer device 240x67 [ 6.775354] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.780819] tegradc 15200000.display: fb registered [ 6.788002] tegra-se-nvhost 15830000.se: initialized [ 6.792176] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.798421] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.803839] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.808883] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.809413] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.815219] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.823172] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.823182] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.823279] tegra-se-nvhost 15840000.se: initialized [ 6.824845] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.826420] tegra_actmon d230000.actmon: in actmon_register()... [ 6.829279] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.835054] usb 1-2: Manufacturer: Generic [ 6.837158] hub 1-2:1.0: USB hub found [ 6.842634] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.848178] hub 1-2:1.0: 4 ports detected [ 6.852880] hvc_sysfs: hypervisor is not present [ 6.888182] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.930143] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.930236] ALSA device list: [ 6.930470] No soundcards found. [ 6.931487] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.931704] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.933670] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.940154] Extcon AUX1(HDMI) enable [ 6.943725] tegradc 15210000.display: disp1 connected to head1->sor [ 6.950207] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.957198] tegradc 15210000.display: DT parsed successfully [ 6.962812] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.970715] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.977071] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.983718] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.989836] tegradc 15210000.display: probed [ 6.991510] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.002972] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.002976] usb 2-3: Manufacturer: Generic [ 7.011977] tegradc 15210000.display: fb registered [ 7.013724] hub 2-3:1.0: USB hub found [ 7.020360] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.022862] hub 2-3:1.0: 4 ports detected [ 7.025016] Freeing unused kernel memory: 3968K [ 7.028021] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.044361] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.050041] tegradc 15210000.display: blank - powerdown [ 7.055059] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.057343] Run /init as init process [ 7.063079] Extcon DP: HPD disabled [ 7.063083] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.063095] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.070512] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.085228] tegra_cec 3960000.tegra_cec: physical address: 10:00. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.096047] tegradc 15200000.display: blank - powerdown [ 7.101274] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.138604] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.138608] Extcon AUX1(HDMI) disable [ 7.155569] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.155575] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.161762] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.162580] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.173645] tegradc 15200000.display: unblank [ 7.174686] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.174878] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.180528] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.182425] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.186451] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.186454] Extcon AUX1(HDMI) enable [ 7.199173] tegradc 15200000.display: sync windows ret = 247 [ 7.227658] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.229149] Extcon HDMI: HPD enabled [ 7.230614] tegradc 15200000.display: hdmi: plugged [ 7.250480] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.252044] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.253458] usb 1-3: Product: Bluetooth Radio [ 7.254839] usb 1-3: Manufacturer: Realtek [ 7.256106] usb 1-3: SerialNumber: 00e04c000001 [ 7.281740] Root device found: mmcblk0p1 [ 7.285066] Found dev node: /dev/mmcblk0p1 [ 7.320520] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.325791] Rootfs mounted over mmcblk0p1 [ 7.356942] Switching from initrd to actual rootfs [ 7.526743] systemd[1]: System time before build time, advancing clock. [ 7.598120] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.602946] systemd[1]: Detected architecture arm64. [ 7.646224] systemd[1]: Set hostname to . [ 7.817099] systemd-sysv-generator[245]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.160751] random: systemd: uninitialized urandom read (16 bytes read) [ 8.162543] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.164136] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.169710] systemd[1]: Created slice system-modprobe.slice. [ 8.173109] random: systemd: uninitialized urandom read (16 bytes read) [ 8.175808] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.178959] random: systemd: uninitialized urandom read (16 bytes read) [ 8.181627] systemd[1]: Created slice User and Session Slice. [ 8.185158] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.189550] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.192980] systemd[1]: Reached target User and Group Name Lookups. [ 8.196208] systemd[1]: Reached target Slices. [ 8.199328] systemd[1]: Reached target Swap. [ 8.203342] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.206950] systemd[1]: Listening on Syslog Socket. [ 8.210470] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.213879] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.218075] systemd[1]: Listening on Journal Audit Socket. [ 8.221698] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.225473] systemd[1]: Listening on Journal Socket. [ 8.229114] systemd[1]: Listening on udev Control Socket. [ 8.232619] systemd[1]: Listening on udev Kernel Socket. [ 8.242201] systemd[1]: Mounting Huge Pages File System... [ 8.251764] systemd[1]: Mounting POSIX Message Queue File System... [ 8.259948] systemd[1]: Mounting RPC Pipe File System... [ 8.268458] systemd[1]: Mounting Kernel Debug File System... [ 8.277078] systemd[1]: Mounting Kernel Trace File System... [ 8.287067] systemd[1]: Starting Journal Service... [ 8.295785] systemd[1]: Starting Set the console keyboard layout... [ 8.304092] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.307704] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.314020] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.322298] systemd[1]: Started Nameserver information manager. [ 8.326914] systemd[1]: Reached target Network (Pre). [ 8.334052] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.335912] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.342255] systemd[1]: Starting Load Kernel Modules... [ 8.350309] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.358261] systemd[1]: Starting udev Coldplug all Devices... [ 8.369796] systemd[1]: Mounted Huge Pages File System. [ 8.373523] systemd[1]: Mounted POSIX Message Queue File System. [ 8.377548] systemd[1]: Mounted RPC Pipe File System. [ 8.379363] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.386221] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.386899] systemd[1]: Mounted Kernel Debug File System. [ 8.388589] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.390713] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.390728] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.390732] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.390908] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.391149] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.391409] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.391417] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.397665] random: crng init done [ 8.421028] random: 7 urandom warning(s) missed due to ratelimiting [ 8.431459] systemd[1]: Mounted Kernel Trace File System. [ 8.437960] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.444552] systemd[1]: nvfb-udev.service: Succeeded. [ 8.449259] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.461715] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.474589] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.476389] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.482612] systemd[1]: Starting Load/Save Random Seed... [ 8.492244] systemd[1]: Starting Create System Users... [ 8.527332] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.527332] [ 8.541173] systemd[1]: Finished Load/Save Random Seed. [ 8.553367] systemd[1]: Finished Set the console keyboard layout. [ 8.563022] systemd[1]: Finished Load Kernel Modules. [ 8.569421] systemd[1]: Finished Create System Users. [ 8.573808] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.579818] systemd[1]: Mounting Kernel Configuration File System... [ 8.591000] systemd[1]: Started OP-TEE Client Supplicant. [ 8.599461] systemd[1]: Starting Apply Kernel Variables... [ 8.607023] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.614664] systemd[1]: Mounted Kernel Configuration File System. [ 10.009309] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.016292] imx219 9-0010: board setup failed [ 10.016375] imx219: probe of 9-0010 failed with error -121 [ 10.027324] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.032533] imx219 10-0010: board setup failed [ 10.036622] imx219: probe of 10-0010 failed with error -121 [ 10.063864] hot-surface-alert cooling state: 0 -> 1 [ 10.878684] using random self ethernet address [ 10.878691] using random host ethernet address [ 11.385475] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.386758] Creating 1 MTD partitions on "spi6.0": [ 11.387990] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.205736] using random self ethernet address [ 12.207301] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.833528] nvidia: loading out-of-tree module taints kernel. [ 29.540190] tegradc 15200000.display: sor_poll_register 0x15: timeout [ 29.540201] tegradc 15200000.display: dc timeout waiting for OR MODE = SAFE [ 59.255156] watchdog: watchdog0: watchdog did not stop! [ 59.726162] Trying to unregister non-registered hwtime source [ 62.783677] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.785252] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERRÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.647] I> width = 720, height = 480, frequency = 26973026 [0003.651] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.746] calling apps_init() [0003.747] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000696] Console: colour dummy device 80x25 [ 0.002106] printk: console [tty0] enabled [ 0.002174] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002210] pid_max: default: 32768 minimum: 301 [ 0.002381] LSM: Security Framework initializing [ 0.002439] Yama: becoming mindful. [ 0.002486] SELinux: Initializing. [ 0.002635] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002680] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005865] rcu: Hierarchical SRCU implementation. [ 0.006159] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006846] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006897] DTB Build time: Aug 10 2022 20:31:49 [ 0.009468] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009696] Remapping and enabling EFI services. [ 0.011894] smp: Bringing up secondary CPUs ... [ 0.041089] Detected PIPT I-cache on CPU1 [ 0.041188] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070704] Detected PIPT I-cache on CPU2 [ 0.070860] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100510] Detected PIPT I-cache on CPU3 [ 0.100601] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130471] Detected PIPT I-cache on CPU4 [ 0.130649] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160496] Detected PIPT I-cache on CPU5 [ 0.160693] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161057] smp: Brought up 1 node, 6 CPUs [ 0.161241] SMP: Total of 6 processors activated. [ 0.161285] CPU features: detected: Privileged Access Never [ 0.161312] CPU features: detected: LSE atomic instructions [ 0.161332] CPU features: detected: User Access Override [ 0.161359] CPU features: detected: 32-bit EL0 Support [ 0.161377] CPU features: detected: RAS Extension Support [ 0.161410] CPU features: detected: CRC32 instructions [ 0.161436] CPU features: detected: 32-bit EL1 Support [ 0.229589] CPU: All CPU(s) started at EL2 [ 0.235225] devtmpfs: initialized [ 0.313359] Registered cp15_barrier emulation handler [ 0.313464] Registered setend emulation handler [ 0.313498] KASLR enabled [ 0.313841] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.313877] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.315895] pinctrl core: initialized pinctrl subsystem [ 0.316967] SMBIOS 3.0.0 present. [ 0.317034] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.317888] NET: Registered protocol family 16 [ 0.320356] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.321089] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.322145] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.322228] audit: initializing netlink subsys (disabled) [ 0.322522] audit: type=2000 audit(0.320:1): state=initialized audit_enabled=0 res=1 [ 0.323066] thermal_sys: Registered thermal governor 'step_wise' [ 0.323079] thermal_sys: Registered thermal governor 'power_allocator' [ 0.323105] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.326372] cpuidle: using governor menu [ 0.326850] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.327313] ASID allocator initialised with 32768 entries [ 0.327768] Serial: AMBA PL011 UART driver [ 0.333446] Tegra reboot handler registered. [ 0.428507] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.428675] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.428950] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.429004] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.429161] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.429211] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.429396] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.429470] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.429654] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.429705] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.432929] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.432996] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.433036] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.433079] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.433133] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.433184] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.433218] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.433251] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.433286] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.433319] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.433352] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.433384] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.433445] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.433499] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.433532] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.433587] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.433620] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.433735] mc-err: mcerr ops are set to t19x [ 0.450186] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.450219] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.450239] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.450258] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.458321] ACPI: Interpreter disabled. [ 0.459830] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.461568] iommu: Default domain type: Translated [ 0.461672] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.462228] SCSI subsystem initialized [ 0.462417] usbcore: registered new interface driver usbfs [ 0.462472] usbcore: registered new interface driver hub [ 0.462561] usbcore: registered new device driver usb [ 0.463171] mc: Linux media interface: v0.10 [ 0.463222] videodev: Linux video capture interface: v2.00 [ 0.463638] pps_core: LinuxPPS API ver. 1 registered [ 0.463657] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.463691] PTP clock support registered [ 0.463968] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.464344] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.464503] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.465257] Registered efivars operations [ 0.471527] FPGA manager framework [ 0.471657] Advanced Linux Sound Architecture Driver Initialized. [ 0.472540] Bluetooth: Core ver 2.22 [ 0.472591] NET: Registered protocol family 31 [ 0.472607] Bluetooth: HCI device and connection manager initialized [ 0.472629] Bluetooth: HCI socket layer initialized [ 0.472646] Bluetooth: L2CAP socket layer initialized [ 0.472675] Bluetooth: SCO socket layer initialized [ 0.474503] camchar: rtcpu character device driver loaded [ 0.475404] clocksource: Switched to clocksource arch_sys_counter [ 0.938525] VFS: Disk quotas dquot_6.6.0 [ 0.938622] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.939074] pnp: PnP ACPI: disabled [ 0.953262] la/ptsa driver initialized. [ 0.953469] NET: Registered protocol family 2 [ 0.953693] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.961610] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.961706] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.962085] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.962713] TCP: Hash tables configured (established 65536 bind 65536) [ 0.962884] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.963023] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.963330] NET: Registered protocol family 1 [ 0.964238] RPC: Registered named UNIX socket transport module. [ 0.964269] RPC: Registered udp transport module. [ 0.964310] RPC: Registered tcp transport module. [ 0.964324] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.964347] PCI: CLS 0 bytes, default 64 [ 0.964600] Trying to unpack rootfs image as initramfs... [ 1.226806] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.230034] Freeing initrd memory: 8196K [ 1.233965] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.233999] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.234055] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.234362] kvm [1]: IPA Size Limit: 40 bits [ 1.234817] kvm [1]: vgic interrupt IRQ9 [ 1.235373] kvm [1]: VHE mode initialized successfully [ 1.236720] Initialise system trusted keyrings [ 1.237004] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.242042] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.242798] NFS: Registering the id_resolver key type [ 1.242835] Key type id_resolver registered [ 1.242850] Key type id_legacy registered [ 1.242930] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.242981] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.243019] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.252621] NET: Registered protocol family 38 [ 1.252670] Key type asymmetric registered [ 1.252686] Asymmetric key parser 'x509' registered [ 1.252729] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.253020] io scheduler mq-deadline registered [ 1.253041] io scheduler kyber registered [ 1.258631] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.261560] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.261659] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.261730] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.261826] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.261920] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.267616] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.267738] scrncapt: init (heads:4 wins:6 planes:4) [ 1.268791] EINJ: ACPI disabled. [ 1.271992] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.272049] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.272066] tegra-pmc: ### PMC reset level: L1 [ 1.272080] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.272126] tegra-pmc: PMC Prod config success [ 1.276599] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.281990] random: fast init done [ 1.293442] printk: console [ttyTCU0] enabled [ 2.833549] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.838422] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.843051] arm-smmu 10000000.iommu: stage 1 translation [ 2.848226] arm-smmu 10000000.iommu: stage 2 translation [ 2.853973] arm-smmu 10000000.iommu: nested translation [ 2.859059] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.866231] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.877123] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.879617] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.885916] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.893872] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.898986] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.903694] arm-smmu 12000000.iommu: stage 1 translation [ 2.909470] arm-smmu 12000000.iommu: stage 2 translation [ 2.914895] arm-smmu 12000000.iommu: nested translation [ 2.920070] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.927221] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.938108] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.940628] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.946903] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.954580] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.963927] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.967566] tegra_profiler: auth: init [ 2.971620] THERMAL EST: found 3 subdevs [ 2.975224] THERMAL EST num_resources: 0 [ 2.978844] [THERMAL EST subdev 0] [ 2.982420] [THERMAL EST subdev 1] [ 2.985574] [THERMAL EST subdev 2] [ 2.989082] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.995600] THERMAL EST: thz register success. [ 2.999795] THERMAL EST: end of probe, return err: 0 [ 3.004733] nvsciipc: loaded module [ 3.012174] tun: Universal TUN/TAP device driver, 1.6 [ 3.014274] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 3.020589] hns3: Copyright (c) 2017 Huawei Corporation. [ 3.026401] e1000e: Intel(R) PRO/1000 Network Driver [ 3.031087] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.037429] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.042707] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.048917] PPP generic driver version 2.4.2 [ 3.053146] PPP BSD Compression module registered [ 3.057711] PPP Deflate Compression module registered [ 3.062934] PPP MPPE Compression module registered [ 3.067715] usbcore: registered new interface driver r8152 [ 3.073449] usbcore: registered new interface driver asix [ 3.078527] usbcore: registered new interface driver ax88179_178a [ 3.084652] usbcore: registered new interface driver cdc_ether [ 3.090873] usbcore: registered new interface driver net1080 [ 3.096468] usbcore: registered new interface driver cdc_subset [ 3.102498] usbcore: registered new interface driver zaurus [ 3.108194] usbcore: registered new interface driver cdc_ncm [ 3.113896] usbcore: registered new interface driver aqc111 [ 3.119589] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.125336] ohci-pci: OHCI PCI platform driver [ 3.129915] ohci-platform: OHCI generic platform driver [ 3.135800] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.141745] usbcore: registered new interface driver uas [ 3.145935] usbcore: registered new interface driver usb-storage [ 3.152367] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.158079] mousedev: PS/2 mouse device common for all mice [ 3.163347] usbcore: registered new interface driver xpad [ 3.171056] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.173832] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.181873] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.188445] i2c /dev entries driver [ 3.191790] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.197579] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.202760] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.208220] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.213663] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.219097] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.224246] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.237102] device-mapper: uevent: version 1.0.3 [ 3.237504] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.244516] cpuidle: Initializing cpuidle driver [ 3.248446] sdhci: Secure Digital Host Controller Interface driver [ 3.253676] sdhci: Copyright(c) Pierre Ossman [ 3.257522] Synopsys Designware Multimedia Card Interface Driver [ 3.263689] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.269961] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.270493] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.282887] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.299168] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.308312] vdd-1v0: supplied by regulator-dummy [ 3.313656] vdd-1v8-hs: supplied by regulator-dummy [ 3.318400] vdd-1v8-ls: supplied by regulator-dummy [ 3.323064] vdd-1v8-ao: supplied by regulator-dummy [ 3.326824] vddio-ddr-1v1: supplied by regulator-dummy [ 3.331142] vdd-rtc: supplied by regulator-dummy [ 3.332679] spmic-ldo1: supplied by regulator-dummy [ 3.333842] vdd-ao-3v3: supplied by regulator-dummy [ 3.339830] vddio-emmc-3v3: supplied by regulator-dummy [ 3.345951] spmic-ldo4: supplied by regulator-dummy [ 3.347101] vdd-usb-3v3: supplied by regulator-dummy [ 3.354455] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.360594] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.365960] spmic-ldo8: supplied by vdd-1v8-ls [ 3.367302] gpio-510 (gpio_default): hogged as output/high [ 3.369947] gpio-511 (gpio_default): hogged as output/high [ 3.376536] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.515038] max77686-rtc max77620-rtc: registered as rtc0 [ 3.516026] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.516307] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.238425] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.239544] hid: raw HID events driver (C) Jiri Kosina [ 4.240179] usbcore: registered new interface driver usbhid [ 4.240325] usbhid: USB HID core driver [ 4.242080] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.243237] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.379849] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.455188] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.148 ms) ÿá[ 4.328305] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.328969] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.330044] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.330796] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.332527] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.333154] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.333759] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.335056] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.335369] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.337396] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.344867] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.350743] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.356216] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.362637] denver_knobs_init:MTS_VERSION:55637613 [ 4.374971] t19x_cache tegra-cache: probed [ 4.377784] optee: probing for conduit method. [ 4.378674] optee: revision 3.16 (65cc2218) [ 4.379946] optee: dynamic shared memory is enabled [ 4.383551] optee: initialized driver [ 4.389526] nvpmodel: initialized successfully [ 4.391014] tegra_hv: get_hvd: not initialized yet [ 4.395762] user_ivc_mempool: hypervisor not present [ 4.401918] usbcore: registered new interface driver snd-usb-audio [ 4.407994] u32 classifier [ 4.409249] input device check on [ 4.413091] Actions configured [ 4.416876] Initializing XFRM netlink socket [ 4.421816] NET: Registered protocol family 10 [ 4.428711] Segment Routing with IPv6 [ 4.429048] NET: Registered protocol family 17 [ 4.433134] NET: Registered protocol family 15 [ 4.437904] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.451066] Bluetooth: RFCOMM socket layer initialized [ 4.455868] Bluetooth: RFCOMM ver 1.11 [ 4.459948] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.465593] Bluetooth: HIDP socket layer initialized [ 4.471560] 9pnet: Installing 9P2000 support [ 4.475189] Key type dns_resolver registered [ 4.480344] registered taskstats version 1 [ 4.483471] Loading compiled-in X.509 certificates [ 4.496247] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.498917] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.509217] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.511640] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.519933] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.528612] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.643553] tegra194-pcie 14160000.pcie: Link up [ 4.646694] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.647174] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.647378] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.647684] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.647901] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.648326] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.648811] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.660983] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.661535] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.661972] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.663686] pci 0004:01:00.0: supports D1 D2 [ 4.663834] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.674882] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.675261] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.675631] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.676065] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.676404] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.676642] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.678322] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.685570] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.694311] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.703971] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.708987] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.714704] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.721443] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.730363] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.732213] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.740440] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.748886] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.864385] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.864816] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.865072] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.865261] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.865487] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.865741] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.866182] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.866578] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.886936] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.887294] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.889130] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.890448] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.892139] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.893686] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.894634] pci 0005:00:00.0: Removing from iommu group 7 [ 5.894929] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.930914] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.955525] host1x 13e10000.host1x: initialized [ 5.957118] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.958077] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.959264] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.960124] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.961350] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.962152] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.963320] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.964142] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.965418] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.966063] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.974323] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.981581] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.991508] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.998435] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.008166] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.015590] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.025351] falcon 15340000.vic: Adding to iommu group 17 [ 6.040283] falcon 15340000.vic: initialized [ 6.041617] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.047719] falcon 15380000.nvjpg: initialized [ 6.048778] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.058803] falcon 154c0000.nvenc: initialized [ 6.059774] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.069819] falcon 15a80000.nvenc1: initialized [ 6.070459] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.082534] nvdec 15480000.nvdec: initialized [ 6.083352] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.093585] nvdec 15140000.nvdec1: initialized [ 6.094151] tsec 15500000.tsec: Adding to iommu group 18 [ 6.099999] tsec 15500000.tsec: initialized [ 6.100604] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.105853] tsec 15100000.tsecb: initialized [ 6.109817] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.136714] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.148495] gpio-374 (wifi-enable): hogged as output/high [ 6.148905] gpio-431 (camera-control-output-low): hogged as output/low [ 6.149185] gpio-432 (camera-control-output-low): hogged as output/low [ 6.151076] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.153589] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.154219] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.157269] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.162200] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.167938] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.173819] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.182961] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.189290] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.201425] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.205979] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.211497] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.220269] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.230052] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.237625] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.244851] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.250582] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.260756] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.266583] pva 16000000.pva0: Adding to iommu group 22 [ 6.294163] pva 16000000.pva0: initialized [ 6.300098] pva 16800000.pva1: Adding to iommu group 23 [ 6.312751] pva 16800000.pva1: initialized [ 6.316895] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.330931] nvdla 15880000.nvdla0: initialized [ 6.332435] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.348856] nvdla 158c0000.nvdla1: initialized [ 6.351611] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.352050] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.352632] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.353026] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.353377] tegradccommon 15200000.display-hub: dma mapping done [ 6.353614] tegradc 15200000.display: Adding to iommu group 26 [ 6.353678] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.354326] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.356617] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.361633] tegra_cec 3960000.tegra_cec: probed [ 6.362737] tegradc 15210000.display: Adding to iommu group 26 [ 6.363076] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.363221] generic_infoframe_type: 0x87 [ 6.363313] tegradc 15200000.display: DT parsed successfully [ 6.363609] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.367701] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.368013] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.368026] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.368031] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.368980] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.368993] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.370411] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.374217] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.384967] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.389515] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.397581] kfuse 3830000.kfuse: initialized [ 6.404781] tegradc 15210000.display: disp0 connected to head1->sor [ 6.411488] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.419453] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.427197] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.432696] tegradc 15210000.display: DT parsed successfully [ 6.440032] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.449747] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.521860] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.531311] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.536234] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.545326] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.551009] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.552120] random: crng init done [ 6.571526] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.572252] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.577543] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.586256] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.594777] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.601137] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.608903] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.616130] usb usb1: Product: xHCI Host Controller [ 6.620791] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.626911] usb usb1: SerialNumber: 3610000.xhci [ 6.633223] hub 1-0:1.0: USB hub found [ 6.635972] hub 1-0:1.0: 4 ports detected [ 6.640530] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.645299] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.652658] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.660462] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.668247] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.675489] usb usb2: Product: xHCI Host Controller [ 6.680744] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.686929] usb usb2: SerialNumber: 3610000.xhci [ 6.692385] hub 2-0:1.0: USB hub found [ 6.695367] hub 2-0:1.0: 4 ports detected [ 6.741960] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.749026] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.750576] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.750762] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.764189] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.765311] tegra194-cpufreq ccplex: probed with BWMGR [ 6.766733] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.767244] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.767754] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.768979] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.776416] tegra194-vi5 15c10000.vi: initialized [ 6.777929] tegradc 15210000.display: disp0 connected to head1->sor [ 6.778390] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.780825] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.782674] tegradc 15210000.display: DT parsed successfully [ 6.784621] mmc0: CQHCI version 5.10 [ 6.789074] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.794630] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.794713] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.798189] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.806272] generic_infoframe_type: 0x87 [ 6.813893] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.813899] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.813908] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.820509] tegradc 15200000.display: DT parsed successfully [ 6.856213] tegradc 15200000.display: Display dc.000000004fd6f16a registered with id=0 [ 6.856723] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.865001] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.870599] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.870608] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.870616] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.878817] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.878821] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.899433] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.909046] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.929948] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.936567] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.936717] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.953982] nvethernet 2490000.ethernet: Macsec not supported [ 6.955240] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.967181] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.976150] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.984448] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.984835] tegradc 15200000.display: probed [ 6.988739] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.000797] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.008596] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.015109] tegra-se-nvhost 15810000.se: initialized [ 7.023344] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.025166] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.031372] tegra-se-nvhost 15820000.se: initialized [ 7.037730] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.042581] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.048738] tegra-se-nvhost 15830000.se: initialized [ 7.054081] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.054253] Console: switching to colour frame buffer device 240x67 [ 7.054637] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.059261] tegradc 15200000.display: fb registered [ 7.065283] mmc0: Command Queue Engine enabled [ 7.071832] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.076692] mmc0: periodic cache flush enabled [ 7.081055] tegra-se-nvhost 15840000.se: initialized [ 7.086829] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.092772] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.096451] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.096554] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.096678] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.100310] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.103802] tegra_actmon d230000.actmon: in actmon_register()... [ 7.108765] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.114531] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.119129] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.126650] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.134429] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.134437] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.140668] hvc_sysfs: hypervisor is not present [ 7.145968] usb 1-2: Manufacturer: Generic [ 7.179767] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.179790] ALSA device list: [ 7.179796] No soundcards found. [ 7.182176] hub 1-2:1.0: USB hub found [ 7.185874] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.190064] hub 1-2:1.0: 4 ports detected [ 7.197670] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.198466] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.234954] Extcon AUX1(HDMI) enable [ 7.235061] tegradc 15210000.display: disp1 connected to head1->sor [ 7.236325] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.252679] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.259793] tegradc 15210000.display: DT parsed successfully [ 7.265184] tegradc 15210000.display: Display dc.00000000bf2310d4 registered with id=1 [ 7.273256] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.273616] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.281578] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.281583] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.281587] usb 2-3: Manufacturer: Generic [ 7.292690] hub 2-3:1.0: USB hub found [ 7.294626] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.301669] hub 2-3:1.0: 4 ports detected [ 7.310507] tegradc 15210000.display: probed [ 7.322763] tegradc 15210000.display: fb registered [ 7.330874] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.334518] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.336412] Freeing unused kernel memory: 3968K [ 7.342327] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.351547] Run /init as init process [ 7.356066] tegradc 15210000.display: blank - powerdown [ 7.359481] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.361142] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.367593] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.381408] Extcon DP: HPD disabled [ 7.381413] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.381439] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.381444] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.399441] usb 1-3: new full-speed USB device number 3 using tegra-xusb ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.411114] tegradc 15200000.display: blank - powerdown [ 7.446871] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.446879] Extcon AUX1(HDMI) disable [ 7.466203] Root device found: mmcblk0p1 [ 7.468201] Found dev node: /dev/mmcblk0p1 [ 7.470147] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.471004] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.482867] tegradc 15200000.display: unblank [ 7.483921] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.484111] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.490151] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.491959] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.496059] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.496063] Extcon AUX1(HDMI) enable [ 7.502951] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.506849] Rootfs mounted over mmcblk0p1 [ 7.508728] tegradc 15200000.display: sync windows ret = 247 [ 7.538603] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.539744] Switching from initrd to actual rootfs [ 7.540023] Extcon HDMI: HPD enabled [ 7.542740] tegradc 15200000.display: hdmi: plugged [ 7.564625] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.566112] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.567529] usb 1-3: Product: Bluetooth Radio [ 7.568818] usb 1-3: Manufacturer: Realtek [ 7.570089] usb 1-3: SerialNumber: 00e04c000001 [ 7.695301] systemd[1]: System time before build time, advancing clock. [ 7.772661] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.777555] systemd[1]: Detected architecture arm64. [ 7.814754] systemd[1]: Set hostname to . [ 7.980097] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.329069] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.330762] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.336316] systemd[1]: Created slice system-modprobe.slice. [ 8.340843] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.344907] systemd[1]: Created slice User and Session Slice. [ 8.348312] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.352624] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.355933] systemd[1]: Reached target User and Group Name Lookups. [ 8.360198] systemd[1]: Reached target Slices. [ 8.365050] systemd[1]: Reached target Swap. [ 8.371521] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.377570] systemd[1]: Listening on Syslog Socket. [ 8.383599] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.389432] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.394741] systemd[1]: Listening on Journal Audit Socket. [ 8.398206] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.401805] systemd[1]: Listening on Journal Socket. [ 8.405366] systemd[1]: Listening on udev Control Socket. [ 8.408687] systemd[1]: Listening on udev Kernel Socket. [ 8.416753] systemd[1]: Mounting Huge Pages File System... [ 8.424746] systemd[1]: Mounting POSIX Message Queue File System... [ 8.432455] systemd[1]: Mounting RPC Pipe File System... [ 8.440825] systemd[1]: Mounting Kernel Debug File System... [ 8.448908] systemd[1]: Mounting Kernel Trace File System... [ 8.458498] systemd[1]: Starting Journal Service... [ 8.467126] systemd[1]: Starting Set the console keyboard layout... [ 8.475969] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.479556] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.487056] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.495094] systemd[1]: Started Nameserver information manager. [ 8.499650] systemd[1]: Reached target Network (Pre). [ 8.507176] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.509010] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.515381] systemd[1]: Starting Load Kernel Modules... [ 8.523057] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.531901] systemd[1]: Starting udev Coldplug all Devices... [ 8.541638] systemd[1]: Mounted Huge Pages File System. [ 8.545176] systemd[1]: Mounted POSIX Message Queue File System. [ 8.548923] systemd[1]: Mounted RPC Pipe File System. [ 8.553103] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.553403] systemd[1]: Mounted Kernel Debug File System. [ 8.559131] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.560494] systemd[1]: Mounted Kernel Trace File System. [ 8.562710] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.562717] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.562725] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.562730] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.562936] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.563518] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.572008] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.573459] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.575048] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.583415] systemd[1]: nvfb-udev.service: Succeeded. [ 8.588013] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.600752] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.605724] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.607427] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.622249] systemd[1]: Starting Load/Save Random Seed... [ 8.630197] systemd[1]: Starting Create System Users... [ 8.671337] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.671337] [ 8.677992] systemd[1]: Finished Load/Save Random Seed. [ 8.689347] systemd[1]: Finished Create System Users. [ 8.697821] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.705900] systemd[1]: Finished Load Kernel Modules. [ 8.710184] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.716884] systemd[1]: Mounting Kernel Configuration File System... [ 8.723847] systemd[1]: Started OP-TEE Client Supplicant. [ 8.732650] systemd[1]: Starting Apply Kernel Variables... [ 8.742396] systemd[1]: Finished Set the console keyboard layout. [ 8.746769] systemd[1]: Mounted Kernel Configuration File System. [ 8.757964] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.764758] systemd[1]: Reached target Local File Systems (Pre). [ 10.207113] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.215824] imx219 9-0010: board setup failed [ 10.217114] imx219: probe of 9-0010 failed with error -121 [ 10.235452] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.242040] imx219 10-0010: board setup failed [ 10.272649] imx219: probe of 10-0010 failed with error -121 [ 10.275969] hot-surface-alert cooling state: 0 -> 1 [ 11.152767] using random self ethernet address [ 11.153984] using random host ethernet address [ 11.931548] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.932731] Creating 1 MTD partitions on "spi6.0": [ 11.933792] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.664881] using random self ethernet address [ 12.665993] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.818142] nvidia: loading out-of-tree module taints kernel. [ 59.349705] watchdog: watchdog0: watchdog did not stop! [ 59.836858] Trying to unregister non-registered hwtime source [ 62.893463] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.894943] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.642] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.743] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000741] Console: colour dummy device 80x25 [ 0.002113] printk: console [tty0] enabled [ 0.002181] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002218] pid_max: default: 32768 minimum: 301 [ 0.002461] LSM: Security Framework initializing [ 0.002523] Yama: becoming mindful. [ 0.002564] SELinux: Initializing. [ 0.002727] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002770] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005904] rcu: Hierarchical SRCU implementation. [ 0.006165] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007087] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007137] DTB Build time: Aug 10 2022 20:31:49 [ 0.010140] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010390] Remapping and enabling EFI services. [ 0.012398] smp: Bringing up secondary CPUs ... [ 0.042402] Detected PIPT I-cache on CPU1 [ 0.042494] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071992] Detected PIPT I-cache on CPU2 [ 0.072139] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101756] Detected PIPT I-cache on CPU3 [ 0.101899] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131562] Detected PIPT I-cache on CPU4 [ 0.131661] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161427] Detected PIPT I-cache on CPU5 [ 0.161582] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161911] smp: Brought up 1 node, 6 CPUs [ 0.162040] SMP: Total of 6 processors activated. [ 0.162129] CPU features: detected: Privileged Access Never [ 0.162154] CPU features: detected: LSE atomic instructions [ 0.162168] CPU features: detected: User Access Override [ 0.162182] CPU features: detected: 32-bit EL0 Support [ 0.162195] CPU features: detected: RAS Extension Support [ 0.162207] CPU features: detected: CRC32 instructions [ 0.162221] CPU features: detected: 32-bit EL1 Support [ 0.232728] CPU: All CPU(s) started at EL2 [ 0.239896] devtmpfs: initialized [ 0.291854] Registered cp15_barrier emulation handler [ 0.291983] Registered setend emulation handler [ 0.292005] KASLR enabled [ 0.292247] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.292274] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293651] pinctrl core: initialized pinctrl subsystem [ 0.294705] SMBIOS 3.0.0 present. [ 0.294747] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.295373] NET: Registered protocol family 16 [ 0.297421] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.297952] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.298650] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.298725] audit: initializing netlink subsys (disabled) [ 0.299014] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.299451] thermal_sys: Registered thermal governor 'step_wise' [ 0.299458] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299473] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.301690] cpuidle: using governor menu [ 0.302024] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.302494] ASID allocator initialised with 32768 entries [ 0.302718] Serial: AMBA PL011 UART driver [ 0.305988] Tegra reboot handler registered. [ 0.383863] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.384041] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.384221] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.384280] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.384457] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.384507] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.384623] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.384670] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.384790] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.384848] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.387322] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.387358] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.387387] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.387415] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.387451] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.387479] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.387516] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.387549] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.387575] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.387600] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.387646] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.387671] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.387696] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.387726] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.387752] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.387777] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.387802] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.387957] mc-err: mcerr ops are set to t19x [ 0.401029] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.401052] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.401087] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.401099] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.408137] ACPI: Interpreter disabled. [ 0.409336] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.410596] iommu: Default domain type: Translated [ 0.410668] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.411042] SCSI subsystem initialized [ 0.411229] usbcore: registered new interface driver usbfs [ 0.411277] usbcore: registered new interface driver hub [ 0.411327] usbcore: registered new device driver usb [ 0.411782] mc: Linux media interface: v0.10 [ 0.411811] videodev: Linux video capture interface: v2.00 [ 0.412151] pps_core: LinuxPPS API ver. 1 registered [ 0.412164] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.412189] PTP clock support registered [ 0.412416] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.412808] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.412899] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.413496] Registered efivars operations [ 0.420442] FPGA manager framework [ 0.420568] Advanced Linux Sound Architecture Driver Initialized. [ 0.421152] Bluetooth: Core ver 2.22 [ 0.421191] NET: Registered protocol family 31 [ 0.421202] Bluetooth: HCI device and connection manager initialized [ 0.421218] Bluetooth: HCI socket layer initialized [ 0.421235] Bluetooth: L2CAP socket layer initialized [ 0.421260] Bluetooth: SCO socket layer initialized [ 0.423237] camchar: rtcpu character device driver loaded [ 0.424015] clocksource: Switched to clocksource arch_sys_counter [ 0.786099] VFS: Disk quotas dquot_6.6.0 [ 0.786182] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.786528] pnp: PnP ACPI: disabled [ 0.798240] la/ptsa driver initialized. [ 0.798364] NET: Registered protocol family 2 [ 0.798520] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.803061] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.803122] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.803423] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.803853] TCP: Hash tables configured (established 65536 bind 65536) [ 0.803974] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.804089] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.804295] NET: Registered protocol family 1 [ 0.804926] RPC: Registered named UNIX socket transport module. [ 0.804939] RPC: Registered udp transport module. [ 0.804948] RPC: Registered tcp transport module. [ 0.804957] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.804985] PCI: CLS 0 bytes, default 64 [ 0.805202] Trying to unpack rootfs image as initramfs... [ 0.989954] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.992253] Freeing initrd memory: 8196K [ 0.995821] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.995859] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.995894] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.996290] kvm [1]: IPA Size Limit: 40 bits [ 0.996818] kvm [1]: vgic interrupt IRQ9 [ 0.997416] kvm [1]: VHE mode initialized successfully [ 0.999073] Initialise system trusted keyrings [ 0.999428] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.006201] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.007092] NFS: Registering the id_resolver key type [ 1.007128] Key type id_resolver registered [ 1.007142] Key type id_legacy registered [ 1.007230] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.007281] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.007321] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.020947] NET: Registered protocol family 38 [ 1.020975] Key type asymmetric registered [ 1.020989] Asymmetric key parser 'x509' registered [ 1.021050] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.021318] io scheduler mq-deadline registered [ 1.021337] io scheduler kyber registered [ 1.027526] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.030390] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.030502] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.030573] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.030641] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.030708] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.036042] scrncapt: init (heads:4 wins:6 planes:4) [ 1.036377] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.037271] EINJ: ACPI disabled. [ 1.040529] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.040580] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.040594] tegra-pmc: ### PMC reset level: L1 [ 1.040607] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.040660] tegra-pmc: PMC Prod config success [ 1.046036] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.050907] random: fast init done [ 1.051799] printk: console [ttyTCU0] enabled [ 2.603380] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.607747] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.612583] arm-smmu 10000000.iommu: stage 1 translation [ 2.618233] arm-smmu 10000000.iommu: stage 2 translation [ 2.623301] arm-smmu 10000000.iommu: nested translation [ 2.628897] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.636089] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.647408] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.648935] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.655754] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.663389] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.668538] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.673259] arm-smmu 12000000.iommu: stage 1 translation [ 2.679026] arm-smmu 12000000.iommu: stage 2 translation [ 2.684192] arm-smmu 12000000.iommu: nested translation [ 2.689879] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.697074] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.708399] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.709899] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.716743] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.723861] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.733956] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.736942] tegra_profiler: auth: init [ 2.741138] THERMAL EST: found 3 subdevs [ 2.744835] THERMAL EST num_resources: 0 [ 2.748419] [THERMAL EST subdev 0] [ 2.751725] [THERMAL EST subdev 1] [ 2.755414] [THERMAL EST subdev 2] [ 2.758402] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.764866] THERMAL EST: thz register success. [ 2.769361] THERMAL EST: end of probe, return err: 0 [ 2.774373] nvsciipc: loaded module [ 2.781642] tun: Universal TUN/TAP device driver, 1.6 [ 2.783854] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.790425] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.795795] e1000e: Intel(R) PRO/1000 Network Driver [ 2.800924] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.806738] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.812290] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.818505] PPP generic driver version 2.4.2 [ 2.822766] PPP BSD Compression module registered [ 2.827011] PPP Deflate Compression module registered [ 2.832259] PPP MPPE Compression module registered [ 2.837265] usbcore: registered new interface driver r8152 [ 2.843070] usbcore: registered new interface driver asix [ 2.848109] usbcore: registered new interface driver ax88179_178a [ 2.854232] usbcore: registered new interface driver cdc_ether [ 2.860193] usbcore: registered new interface driver net1080 [ 2.865781] usbcore: registered new interface driver cdc_subset [ 2.872084] usbcore: registered new interface driver zaurus [ 2.877775] usbcore: registered new interface driver cdc_ncm [ 2.883453] usbcore: registered new interface driver aqc111 [ 2.889104] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.895176] ohci-pci: OHCI PCI platform driver [ 2.899209] ohci-platform: OHCI generic platform driver [ 2.905029] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.911637] usbcore: registered new interface driver uas [ 2.915523] usbcore: registered new interface driver usb-storage [ 2.921677] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.927928] mousedev: PS/2 mouse device common for all mice [ 2.932658] usbcore: registered new interface driver xpad [ 2.940872] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.943652] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.951461] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.957982] i2c /dev entries driver [ 2.961123] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.966867] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.972591] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.977916] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.983383] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.988799] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.994153] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.007837] device-mapper: uevent: version 1.0.3 [ 3.008330] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.014455] cpuidle: Initializing cpuidle driver [ 3.018738] sdhci: Secure Digital Host Controller Interface driver [ 3.023055] sdhci: Copyright(c) Pierre Ossman [ 3.027381] Synopsys Designware Multimedia Card Interface Driver [ 3.033335] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.039224] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.039972] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.052826] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.071060] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.080112] vdd-1v0: supplied by regulator-dummy [ 3.085493] vdd-1v8-hs: supplied by regulator-dummy [ 3.090137] vdd-1v8-ls: supplied by regulator-dummy [ 3.094797] vdd-1v8-ao: supplied by regulator-dummy [ 3.098589] vddio-ddr-1v1: supplied by regulator-dummy [ 3.102943] vdd-rtc: supplied by regulator-dummy [ 3.104582] spmic-ldo1: supplied by regulator-dummy [ 3.105726] vdd-ao-3v3: supplied by regulator-dummy [ 3.111839] vddio-emmc-3v3: supplied by regulator-dummy [ 3.118089] spmic-ldo4: supplied by regulator-dummy [ 3.119233] vdd-usb-3v3: supplied by regulator-dummy [ 3.125289] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.131370] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.136774] spmic-ldo8: supplied by vdd-1v8-ls [ 3.138118] gpio-510 (gpio_default): hogged as output/high [ 3.139449] gpio-511 (gpio_default): hogged as output/high [ 3.146173] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.284858] max77686-rtc max77620-rtc: registered as rtc0 [ 3.286076] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.286360] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.011823] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.012910] hid: raw HID events driver (C) Jiri Kosina [ 4.013543] usbcore: registered new interface driver usbhid [ 4.013683] usbhid: USB HID core driver [ 4.015494] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.016805] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.896584] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.971863] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.089 ms) ÿá[ 4.102003] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.102588] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.103691] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.104640] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.106321] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.107017] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.107696] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.109132] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.109489] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.111318] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.118379] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.124149] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.129509] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.135924] denver_knobs_init:MTS_VERSION:55637613 [ 4.148193] t19x_cache tegra-cache: probed [ 4.150780] optee: probing for conduit method. [ 4.151610] optee: revision 3.16 (65cc2218) [ 4.152593] optee: dynamic shared memory is enabled [ 4.156967] optee: initialized driver [ 4.162718] nvpmodel: initialized successfully [ 4.164225] tegra_hv: get_hvd: not initialized yet [ 4.168948] user_ivc_mempool: hypervisor not present [ 4.175418] usbcore: registered new interface driver snd-usb-audio [ 4.181704] u32 classifier [ 4.182639] input device check on [ 4.186468] Actions configured [ 4.190341] Initializing XFRM netlink socket [ 4.195041] NET: Registered protocol family 10 [ 4.201389] Segment Routing with IPv6 [ 4.202504] NET: Registered protocol family 17 [ 4.206547] NET: Registered protocol family 15 [ 4.211184] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.224727] Bluetooth: RFCOMM socket layer initialized [ 4.229563] Bluetooth: RFCOMM ver 1.11 [ 4.233099] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.239188] Bluetooth: HIDP socket layer initialized [ 4.245072] 9pnet: Installing 9P2000 support [ 4.248663] Key type dns_resolver registered [ 4.253743] registered taskstats version 1 [ 4.256816] Loading compiled-in X.509 certificates [ 4.269159] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.272570] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.283238] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.285134] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.293590] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.301763] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.416092] tegra194-pcie 14160000.pcie: Link up [ 4.418740] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.418953] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.419109] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.419371] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.419571] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.419936] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.420426] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.431602] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.432334] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.432785] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.434361] pci 0004:01:00.0: supports D1 D2 [ 4.434530] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.443248] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.443617] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.443879] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.444490] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.444768] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.444956] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.450934] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.458276] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.466564] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.477145] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.481550] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.487191] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.494035] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.502715] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.504507] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.513233] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.521417] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.624210] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.624747] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.624954] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.625183] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.625433] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.625681] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.626032] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.626447] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.642317] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.642716] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.644778] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.646025] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.647632] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.649344] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.650256] pci 0005:00:00.0: Removing from iommu group 7 [ 5.650544] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.679795] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.699628] host1x 13e10000.host1x: initialized [ 5.701006] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.701837] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.702935] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.703603] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.704802] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.705384] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.706406] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.707399] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.717424] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.724288] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.734184] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.741326] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.751002] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.758351] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.768191] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.775386] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.785150] falcon 15340000.vic: Adding to iommu group 17 [ 5.799404] falcon 15340000.vic: initialized [ 5.800510] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.805505] falcon 15380000.nvjpg: initialized [ 5.805989] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.817927] falcon 154c0000.nvenc: initialized [ 5.818482] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.827668] falcon 15a80000.nvenc1: initialized [ 5.828240] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.839556] nvdec 15480000.nvdec: initialized [ 5.840133] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.849885] nvdec 15140000.nvdec1: initialized [ 5.850423] tsec 15500000.tsec: Adding to iommu group 18 [ 5.856198] tsec 15500000.tsec: initialized [ 5.856654] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.865222] tsec 15100000.tsecb: initialized [ 5.868855] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.893429] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.904267] gpio-374 (wifi-enable): hogged as output/high [ 5.904539] gpio-431 (camera-control-output-low): hogged as output/low [ 5.904767] gpio-432 (camera-control-output-low): hogged as output/low [ 5.906398] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.908082] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.909536] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.916525] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.921509] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.927273] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.932956] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.941647] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.948747] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.959928] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.965533] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.971523] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.980314] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.989634] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.996512] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.004122] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.010643] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.020050] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.026293] pva 16000000.pva0: Adding to iommu group 22 [ 6.052431] pva 16000000.pva0: initialized [ 6.056712] pva 16800000.pva1: Adding to iommu group 23 [ 6.067294] pva 16800000.pva1: initialized [ 6.071682] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.083649] nvdla 15880000.nvdla0: initialized [ 6.084961] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.093265] nvdla 158c0000.nvdla1: initialized [ 6.095739] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.095927] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.096198] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.096419] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.096490] tegradccommon 15200000.display-hub: dma mapping done [ 6.097274] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.097944] tegradc 15200000.display: Adding to iommu group 26 [ 6.106852] tegradc 15210000.display: Adding to iommu group 26 [ 6.107023] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.107139] generic_infoframe_type: 0x87 [ 6.107246] tegradc 15200000.display: DT parsed successfully [ 6.107368] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.110911] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.126498] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.131970] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.140004] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.140042] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.154807] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.160092] tegra_cec 3960000.tegra_cec: probed [ 6.168440] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.186923] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.194051] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.211970] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.212821] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.217222] kfuse 3830000.kfuse: initialized [ 6.228484] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.228889] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.236630] tegradc 15210000.display: disp0 connected to head1->sor [ 6.241332] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.241927] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.247853] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.255001] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.260103] tegradc 15210000.display: DT parsed successfully [ 6.268675] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.275809] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.296663] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.305800] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.310650] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.331390] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.331768] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.334015] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.342370] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.350911] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.357786] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.365538] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.372409] usb usb1: Product: xHCI Host Controller [ 6.377517] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.383787] usb usb1: SerialNumber: 3610000.xhci [ 6.389395] hub 1-0:1.0: USB hub found [ 6.392121] hub 1-0:1.0: 4 ports detected [ 6.396652] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.401882] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.409272] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.417301] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.424700] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.431924] usb usb2: Product: xHCI Host Controller [ 6.437169] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.443093] usb usb2: SerialNumber: 3610000.xhci [ 6.448879] hub 2-0:1.0: USB hub found [ 6.451598] hub 2-0:1.0: 4 ports detected [ 6.491544] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.497203] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.498517] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.498732] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.512413] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1904000 KHz, changing to: 1907200 KHz [ 6.513434] tegra194-cpufreq ccplex: probed with BWMGR [ 6.514709] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.515367] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.515862] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.517224] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.527026] mmc0: CQHCI version 5.10 [ 6.528459] tegra194-vi5 15c10000.vi: initialized [ 6.530031] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.531563] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.535450] generic_infoframe_type: 0x87 [ 6.541884] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.545599] tegradc 15200000.display: DT parsed successfully [ 6.553978] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.554782] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.559245] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.565755] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.565766] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.574440] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.581678] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.588068] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.588236] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.594722] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.603197] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.603595] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.609614] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.615892] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.616152] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.625703] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.633200] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.645127] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.661384] tegradc 15200000.display: probed [ 6.664037] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.664796] mmc0: Command Queue Engine enabled [ 6.664800] mmc0: periodic cache flush enabled [ 6.664812] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.665273] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.665403] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.669219] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.669351] nvethernet 2490000.ethernet: Macsec not supported [ 6.670778] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.752428] Console: switching to colour frame buffer device 240x67 [ 6.753427] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.758272] tegradc 15200000.display: fb registered [ 6.768635] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.774312] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.775248] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.781770] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.787716] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.795681] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.808368] tegra-se-nvhost 15810000.se: initialized [ 6.813459] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.818579] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.824877] tegra-se-nvhost 15820000.se: initialized [ 6.830624] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.835612] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.835634] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.842343] tegra-se-nvhost 15830000.se: initialized [ 6.849712] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.855757] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.862197] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.862201] usb 1-2: Manufacturer: Generic [ 6.864325] hub 1-2:1.0: USB hub found [ 6.865855] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.866949] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.866957] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.867586] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.867589] Extcon AUX1(HDMI) enable [ 6.867783] tegradc 15210000.display: disp1 connected to head1->sor [ 6.867944] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.868064] tegradc 15210000.display: DT parsed successfully [ 6.868132] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.868277] tegradc 15210000.display: vblank syncpt # 16 for dc 1 [ 6.868282] tegradc 15210000.display: vpulse3 syncpt # 17 for dc 1 [ 6.869062] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.874224] hub 1-2:1.0: 4 ports detected [ 6.874939] tegradc 15210000.display: probed [ 6.877650] tegra-se-nvhost 15840000.se: initialized [ 6.956912] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.963096] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.988967] tegradc 15210000.display: fb registered [ 6.990516] tegra_actmon d230000.actmon: in actmon_register()... [ 6.997291] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.999869] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.005401] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.005408] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.005411] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.005415] usb 2-3: Manufacturer: Generic [ 7.006950] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.006961] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.012922] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.016085] hub 2-3:1.0: USB hub found [ 7.018152] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.065957] tegradc 15200000.display: blank - powerdown [ 7.066383] hvc_sysfs: hypervisor is not present [ 7.093233] ALSA device list: [ 7.093238] No soundcards found. [ 7.099619] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.099623] Extcon AUX1(HDMI) disable [ 7.123165] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.124032] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.124079] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.137037] tegradc 15200000.display: unblank [ 7.138135] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.138329] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.144037] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.145910] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.149948] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.149952] Extcon AUX1(HDMI) enable [ 7.162673] tegradc 15200000.display: sync windows ret = 247 [ 7.180061] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.201938] tegradc 15210000.display: blank - powerdown [ 7.203544] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.203548] Extcon DP: HPD disabled [ 7.203552] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.203564] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.203568] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.211076] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.212123] Freeing unused kernel memory: 3968K [ 7.218093] Extcon HDMI: HPD enabled [ 7.222918] Run /init as init process [ 7.226417] tegradc 15200000.display: hdmi: plugged [ 7.234885] random: crng init done [ 7.254538] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.255986] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.273378] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.274887] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.276325] usb 1-3: Product: Bluetooth Radio [ 7.277624] usb 1-3: Manufacturer: Realtek [ 7.278955] usb 1-3: SerialNumber: 00e04c000001 [ 7.294469] Root device found: mmcblk0p1 [ 7.297885] Found dev node: /dev/mmcblk0p1 [ 7.333975] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.339201] Rootfs mounted over mmcblk0p1 [ 7.376097] Switching from initrd to actual rootfs [ 7.544875] systemd[1]: System time before build time, advancing clock. [ 7.618135] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.623011] systemd[1]: Detected architecture arm64. [ 7.669011] systemd[1]: Set hostname to . [ 7.830334] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.177331] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.179124] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.184835] systemd[1]: Created slice system-modprobe.slice. [ 8.189631] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.193762] systemd[1]: Created slice User and Session Slice. [ 8.197247] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.201534] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.205095] systemd[1]: Reached target User and Group Name Lookups. [ 8.208555] systemd[1]: Reached target Slices. [ 8.211785] systemd[1]: Reached target Swap. [ 8.216059] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.219818] systemd[1]: Listening on Syslog Socket. [ 8.223552] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.227097] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.231590] systemd[1]: Listening on Journal Audit Socket. [ 8.235401] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.239327] systemd[1]: Listening on Journal Socket. [ 8.243235] systemd[1]: Listening on udev Control Socket. [ 8.246922] systemd[1]: Listening on udev Kernel Socket. [ 8.255731] systemd[1]: Mounting Huge Pages File System... [ 8.267460] systemd[1]: Mounting POSIX Message Queue File System... [ 8.276080] systemd[1]: Mounting RPC Pipe File System... [ 8.284640] systemd[1]: Mounting Kernel Debug File System... [ 8.293298] systemd[1]: Mounting Kernel Trace File System... [ 8.303238] systemd[1]: Starting Journal Service... [ 8.312439] systemd[1]: Starting Set the console keyboard layout... [ 8.320710] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.324516] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.330859] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.338882] systemd[1]: Started Nameserver information manager. [ 8.343534] systemd[1]: Reached target Network (Pre). [ 8.352112] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.354050] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.362848] systemd[1]: Starting Load Kernel Modules... [ 8.371442] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.380700] systemd[1]: Starting udev Coldplug all Devices... [ 8.391031] systemd[1]: Mounted Huge Pages File System. [ 8.394949] systemd[1]: Mounted POSIX Message Queue File System. [ 8.399309] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.399586] systemd[1]: Mounted RPC Pipe File System. [ 8.405155] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.407073] systemd[1]: Mounted Kernel Debug File System. [ 8.407402] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.410079] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.410096] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.410099] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.410505] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.411675] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.413238] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.418940] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.423063] systemd[1]: Mounted Kernel Trace File System. [ 8.429346] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.435439] systemd[1]: nvfb-udev.service: Succeeded. [ 8.439577] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.449141] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.454176] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.455954] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.470641] systemd[1]: Starting Load/Save Random Seed... [ 8.479040] systemd[1]: Starting Create System Users... [ 8.515362] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.515362] [ 8.536415] systemd[1]: Finished Load/Save Random Seed. [ 8.548443] systemd[1]: Finished Create System Users. [ 8.554781] systemd[1]: Finished Load Kernel Modules. [ 8.559070] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.565738] systemd[1]: Mounting Kernel Configuration File System... [ 8.574022] systemd[1]: Started OP-TEE Client Supplicant. [ 8.582640] systemd[1]: Starting Apply Kernel Variables... [ 8.590382] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.600591] systemd[1]: Finished Set the console keyboard layout. [ 8.604808] systemd[1]: Mounted Kernel Configuration File System. [ 9.986106] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.991309] imx219 9-0010: board setup failed [ 9.993084] imx219: probe of 9-0010 failed with error -121 [ 10.007666] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.013761] imx219 10-0010: board setup failed [ 10.013859] imx219: probe of 10-0010 failed with error -121 [ 10.151927] hot-surface-alert cooling state: 0 -> 1 [ 10.557667] using random self ethernet address [ 10.559342] using random host ethernet address [ 11.786135] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.787903] Creating 1 MTD partitions on "spi6.0": [ 11.792117] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.193705] using random self ethernet address [ 12.195417] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.837036] nvidia: loading out-of-tree module taints kernel. [ 59.425803] watchdog: watchdog0: watchdog did not stop! [ 59.884908] Trying to unregister non-registered hwtime source [ 62.947698] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.949513] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] tiíÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized cvc initialized ÿä:20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh6ÿâcvc_late initialized regulator_post initialized ÿä4 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuration miÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäght be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.642] I> edid read success [0003.642] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.653] I> width = 1280, height = 720, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 4096, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.727] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.742] calling apps_init() [0003.743] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000695] Console: colour dummy device 80x25 [ 0.002075] printk: console [tty0] enabled [ 0.002145] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002181] pid_max: default: 32768 minimum: 301 [ 0.002344] LSM: Security Framework initializing [ 0.002400] Yama: becoming mindful. [ 0.002446] SELinux: Initializing. [ 0.002657] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002701] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005884] rcu: Hierarchical SRCU implementation. [ 0.006148] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006868] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006917] DTB Build time: Aug 10 2022 20:31:49 [ 0.009629] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009917] Remapping and enabling EFI services. [ 0.012012] smp: Bringing up secondary CPUs ... [ 0.041257] Detected PIPT I-cache on CPU1 [ 0.041370] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073466] Detected PIPT I-cache on CPU2 [ 0.073627] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103234] Detected PIPT I-cache on CPU3 [ 0.103323] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133207] Detected PIPT I-cache on CPU4 [ 0.133316] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162978] Detected PIPT I-cache on CPU5 [ 0.163157] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163539] smp: Brought up 1 node, 6 CPUs [ 0.163707] SMP: Total of 6 processors activated. [ 0.163752] CPU features: detected: Privileged Access Never [ 0.163774] CPU features: detected: LSE atomic instructions [ 0.163787] CPU features: detected: User Access Override [ 0.163800] CPU features: detected: 32-bit EL0 Support [ 0.163812] CPU features: detected: RAS Extension Support [ 0.163825] CPU features: detected: CRC32 instructions [ 0.163838] CPU features: detected: 32-bit EL1 Support [ 0.232012] CPU: All CPU(s) started at EL2 [ 0.239332] devtmpfs: initialized [ 0.289153] Registered cp15_barrier emulation handler [ 0.289271] Registered setend emulation handler [ 0.289291] KASLR enabled [ 0.289583] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289606] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290987] pinctrl core: initialized pinctrl subsystem [ 0.292140] SMBIOS 3.0.0 present. [ 0.292182] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292850] NET: Registered protocol family 16 [ 0.294773] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295271] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296016] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296080] audit: initializing netlink subsys (disabled) [ 0.296348] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296832] thermal_sys: Registered thermal governor 'step_wise' [ 0.296839] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296855] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299259] cpuidle: using governor menu [ 0.299558] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299990] ASID allocator initialised with 32768 entries [ 0.300220] Serial: AMBA PL011 UART driver [ 0.303432] Tegra reboot handler registered. [ 0.376740] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.376934] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.377136] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.377182] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.377306] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.377348] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.377507] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.377564] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.377693] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.377734] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.380037] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.380071] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.380100] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.380133] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.380163] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.380189] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.380225] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.380258] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.380282] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.380306] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.380330] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.380353] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.380377] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.380400] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.380424] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.380447] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.380471] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.380558] mc-err: mcerr ops are set to t19x [ 0.393482] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.393526] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.393539] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.393569] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.400228] ACPI: Interpreter disabled. [ 0.401356] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.402629] iommu: Default domain type: Translated [ 0.402689] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.403128] SCSI subsystem initialized [ 0.403289] usbcore: registered new interface driver usbfs [ 0.403329] usbcore: registered new interface driver hub [ 0.403362] usbcore: registered new device driver usb [ 0.403801] mc: Linux media interface: v0.10 [ 0.403831] videodev: Linux video capture interface: v2.00 [ 0.404185] pps_core: LinuxPPS API ver. 1 registered [ 0.404197] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.404218] PTP clock support registered [ 0.404415] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404682] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.404735] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.405343] Registered efivars operations [ 0.411129] FPGA manager framework [ 0.411233] Advanced Linux Sound Architecture Driver Initialized. [ 0.411838] Bluetooth: Core ver 2.22 [ 0.411880] NET: Registered protocol family 31 [ 0.411892] Bluetooth: HCI device and connection manager initialized [ 0.411906] Bluetooth: HCI socket layer initialized [ 0.411922] Bluetooth: L2CAP socket layer initialized [ 0.411943] Bluetooth: SCO socket layer initialized [ 0.413572] camchar: rtcpu character device driver loaded [ 0.414316] clocksource: Switched to clocksource arch_sys_counter [ 0.704004] VFS: Disk quotas dquot_6.6.0 [ 0.704119] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.704456] pnp: PnP ACPI: disabled [ 0.716370] la/ptsa driver initialized. [ 0.716513] NET: Registered protocol family 2 [ 0.716674] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.722072] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.722206] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.722476] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.722903] TCP: Hash tables configured (established 65536 bind 65536) [ 0.723040] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.723132] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.723321] NET: Registered protocol family 1 [ 0.724266] RPC: Registered named UNIX socket transport module. [ 0.724323] RPC: Registered udp transport module. [ 0.724337] RPC: Registered tcp transport module. [ 0.724351] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.724401] PCI: CLS 0 bytes, default 64 [ 0.724689] Trying to unpack rootfs image as initramfs... [ 0.984839] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.988002] Freeing initrd memory: 8196K [ 0.992261] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.992293] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.992339] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.992698] kvm [1]: IPA Size Limit: 40 bits [ 0.993199] kvm [1]: vgic interrupt IRQ9 [ 0.993788] kvm [1]: VHE mode initialized successfully [ 0.995512] Initialise system trusted keyrings [ 0.995857] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.002042] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.003015] NFS: Registering the id_resolver key type [ 1.003051] Key type id_resolver registered [ 1.003071] Key type id_legacy registered [ 1.003158] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.003182] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.003223] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.013187] NET: Registered protocol family 38 [ 1.013210] Key type asymmetric registered [ 1.013226] Asymmetric key parser 'x509' registered [ 1.013277] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.013612] io scheduler mq-deadline registered [ 1.013634] io scheduler kyber registered [ 1.019160] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.022027] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.022115] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.022192] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.022288] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.022433] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.027574] scrncapt: init (heads:4 wins:6 planes:4) [ 1.027724] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.028641] EINJ: ACPI disabled. [ 1.031807] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.031831] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.031871] tegra-pmc: ### PMC reset level: L1 [ 1.031885] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.031948] tegra-pmc: PMC Prod config success [ 1.036794] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.042242] random: fast init done [ 1.053735] printk: console [ttyTCU0] enabled [ 2.593755] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.598724] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.603357] arm-smmu 10000000.iommu: stage 1 translation [ 2.608487] arm-smmu 10000000.iommu: stage 2 translation [ 2.614248] arm-smmu 10000000.iommu: nested translation [ 2.619324] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.626513] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.637613] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.639625] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.646434] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.653817] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.659474] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.663940] arm-smmu 12000000.iommu: stage 1 translation [ 2.669706] arm-smmu 12000000.iommu: stage 2 translation [ 2.674879] arm-smmu 12000000.iommu: nested translation [ 2.680560] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.687522] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.698813] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.700836] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.707423] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.714903] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.724249] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.727620] tegra_profiler: auth: init [ 2.731859] THERMAL EST: found 3 subdevs [ 2.735258] THERMAL EST num_resources: 0 [ 2.739359] [THERMAL EST subdev 0] [ 2.742683] [THERMAL EST subdev 1] [ 2.745817] [THERMAL EST subdev 2] [ 2.749347] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.755846] THERMAL EST: thz register success. [ 2.760042] THERMAL EST: end of probe, return err: 0 [ 2.765078] nvsciipc: loaded module [ 2.772353] tun: Universal TUN/TAP device driver, 1.6 [ 2.774636] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.781094] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.786421] e1000e: Intel(R) PRO/1000 Network Driver [ 2.791593] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.797416] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.802969] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.809129] PPP generic driver version 2.4.2 [ 2.813392] PPP BSD Compression module registered [ 2.817948] PPP Deflate Compression module registered [ 2.822933] PPP MPPE Compression module registered [ 2.828215] usbcore: registered new interface driver r8152 [ 2.833464] usbcore: registered new interface driver asix [ 2.839078] usbcore: registered new interface driver ax88179_178a [ 2.845170] usbcore: registered new interface driver cdc_ether [ 2.850891] usbcore: registered new interface driver net1080 [ 2.856758] usbcore: registered new interface driver cdc_subset [ 2.862759] usbcore: registered new interface driver zaurus [ 2.868490] usbcore: registered new interface driver cdc_ncm [ 2.874137] usbcore: registered new interface driver aqc111 [ 2.879835] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.885595] ohci-pci: OHCI PCI platform driver [ 2.890152] ohci-platform: OHCI generic platform driver [ 2.896012] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.902101] usbcore: registered new interface driver uas [ 2.906483] usbcore: registered new interface driver usb-storage [ 2.912578] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.918366] mousedev: PS/2 mouse device common for all mice [ 2.923340] usbcore: registered new interface driver xpad [ 2.931698] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.934349] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.942136] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.948463] i2c /dev entries driver [ 2.951988] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.957448] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.963057] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.968261] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.973830] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.979070] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.984706] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.997636] device-mapper: uevent: version 1.0.3 [ 2.998046] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.004725] cpuidle: Initializing cpuidle driver [ 3.008891] sdhci: Secure Digital Host Controller Interface driver [ 3.013696] sdhci: Copyright(c) Pierre Ossman [ 3.017805] Synopsys Designware Multimedia Card Interface Driver [ 3.024200] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.029918] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.030573] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.042985] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.061047] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.069946] vdd-1v0: supplied by regulator-dummy [ 3.075360] vdd-1v8-hs: supplied by regulator-dummy [ 3.080030] vdd-1v8-ls: supplied by regulator-dummy [ 3.084689] vdd-1v8-ao: supplied by regulator-dummy [ 3.088474] vddio-ddr-1v1: supplied by regulator-dummy [ 3.092821] vdd-rtc: supplied by regulator-dummy [ 3.094436] spmic-ldo1: supplied by regulator-dummy [ 3.095613] vdd-ao-3v3: supplied by regulator-dummy [ 3.101661] vddio-emmc-3v3: supplied by regulator-dummy [ 3.107736] spmic-ldo4: supplied by regulator-dummy [ 3.108870] vdd-usb-3v3: supplied by regulator-dummy [ 3.115012] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.121086] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.126559] spmic-ldo8: supplied by vdd-1v8-ls [ 3.127869] gpio-510 (gpio_default): hogged as output/high [ 3.130184] gpio-511 (gpio_default): hogged as output/high [ 3.136768] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.275629] max77686-rtc max77620-rtc: registered as rtc0 [ 3.276578] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.276840] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.969041] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.970090] hid: raw HID events driver (C) Jiri Kosina [ 3.970804] usbcore: registered new interface driver usbhid [ 3.970946] usbhid: USB HID core driver [ 3.972701] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.973779] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.746084] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.821542] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.267 ms) ÿá[ 4.058720] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.059252] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.060152] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.060865] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.062561] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.063246] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.063801] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.065147] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.065469] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.067293] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.075394] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.081740] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.086697] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.093138] denver_knobs_init:MTS_VERSION:55637613 [ 4.104965] t19x_cache tegra-cache: probed [ 4.107689] optee: probing for conduit method. [ 4.108660] optee: revision 3.16 (65cc2218) [ 4.109859] optee: dynamic shared memory is enabled [ 4.113833] optee: initialized driver [ 4.119668] nvpmodel: initialized successfully [ 4.121548] tegra_hv: get_hvd: not initialized yet [ 4.126351] user_ivc_mempool: hypervisor not present [ 4.132060] usbcore: registered new interface driver snd-usb-audio [ 4.138477] u32 classifier [ 4.139832] input device check on [ 4.143601] Actions configured [ 4.147218] Initializing XFRM netlink socket [ 4.151934] NET: Registered protocol family 10 [ 4.158271] Segment Routing with IPv6 [ 4.159494] NET: Registered protocol family 17 [ 4.163949] NET: Registered protocol family 15 [ 4.168106] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.181526] Bluetooth: RFCOMM socket layer initialized [ 4.186449] Bluetooth: RFCOMM ver 1.11 [ 4.190255] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.196394] Bluetooth: HIDP socket layer initialized [ 4.201832] 9pnet: Installing 9P2000 support [ 4.205589] Key type dns_resolver registered [ 4.211028] registered taskstats version 1 [ 4.213971] Loading compiled-in X.509 certificates [ 4.226613] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.230199] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.239818] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.241917] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.250796] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.259022] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.374402] tegra194-pcie 14160000.pcie: Link up [ 4.376949] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.377180] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.377329] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.377574] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.377771] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.378142] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.378616] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.391339] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.391849] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.392350] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.393823] pci 0004:01:00.0: supports D1 D2 [ 4.394026] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.403389] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.403721] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.404008] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.404451] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.404715] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.404916] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.409092] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.416313] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.424855] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.435118] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.440024] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.445491] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.452202] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.460481] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.462814] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.471567] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.479758] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.582568] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.583200] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.583401] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.583588] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.583856] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.584054] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.584464] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.584878] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.599922] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.600256] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.601900] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.603399] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.604644] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.606143] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.607167] pci 0005:00:00.0: Removing from iommu group 7 [ 5.607449] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.637599] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.658809] host1x 13e10000.host1x: initialized [ 5.660333] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.661142] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.662171] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.662894] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.663791] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.664284] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.665307] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.665971] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.676143] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.683006] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.693026] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.700059] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.709904] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.716910] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.726480] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.733494] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.743589] falcon 15340000.vic: Adding to iommu group 17 [ 5.757664] falcon 15340000.vic: initialized [ 5.758537] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.763973] falcon 15380000.nvjpg: initialized [ 5.764556] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.777136] falcon 154c0000.nvenc: initialized [ 5.777719] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.786483] falcon 15a80000.nvenc1: initialized [ 5.787081] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.798822] nvdec 15480000.nvdec: initialized [ 5.799496] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.808305] nvdec 15140000.nvdec1: initialized [ 5.808856] tsec 15500000.tsec: Adding to iommu group 18 [ 5.814453] tsec 15500000.tsec: initialized [ 5.814917] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.823674] tsec 15100000.tsecb: initialized [ 5.827435] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.851605] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.863226] gpio-374 (wifi-enable): hogged as output/high [ 5.863512] gpio-431 (camera-control-output-low): hogged as output/low [ 5.863832] gpio-432 (camera-control-output-low): hogged as output/low [ 5.865417] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.867378] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.868115] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.875028] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.880248] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.885689] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.891353] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.899585] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.907103] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.918225] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.924127] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.929592] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.938786] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.947701] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.955229] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.962934] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.969046] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.978793] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.984689] pva 16000000.pva0: Adding to iommu group 22 [ 6.010404] pva 16000000.pva0: initialized [ 6.015042] pva 16800000.pva1: Adding to iommu group 23 [ 6.033752] pva 16800000.pva1: initialized [ 6.037725] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.050490] nvdla 15880000.nvdla0: initialized [ 6.051688] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.059958] nvdla 158c0000.nvdla1: initialized [ 6.064377] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.064577] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.064735] tegradc 15200000.display: Adding to iommu group 26 [ 6.064770] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.064880] tegradccommon 15200000.display-hub: dma mapping done [ 6.065112] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.067291] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.069174] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.073185] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.073368] tegradc 15210000.display: Adding to iommu group 26 [ 6.074496] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.080856] generic_infoframe_type: 0x87 [ 6.086485] tegra_cec 3960000.tegra_cec: probed [ 6.092292] tegradc 15200000.display: DT parsed successfully [ 6.097390] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.101107] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.109178] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.128432] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.128606] kfuse 3830000.kfuse: initialized [ 6.135609] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.135618] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.148427] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.157053] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.161969] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.168242] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.168903] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.187355] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.188092] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.208568] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.209240] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.213640] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.229091] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.230862] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.237902] tegradc 15210000.display: disp0 connected to head1->sor [ 6.242287] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.247714] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.264340] tegradc 15210000.display: DT parsed successfully [ 6.267676] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.269498] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.279310] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.292371] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.301051] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.309448] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.316197] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.323304] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.330928] usb usb1: Product: xHCI Host Controller [ 6.335612] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.341813] usb usb1: SerialNumber: 3610000.xhci [ 6.347391] hub 1-0:1.0: USB hub found [ 6.350687] hub 1-0:1.0: 4 ports detected [ 6.355375] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.359876] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.367481] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.375459] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.383375] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.390634] usb usb2: Product: xHCI Host Controller [ 6.395283] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.401522] usb usb2: SerialNumber: 3610000.xhci [ 6.407153] hub 2-0:1.0: USB hub found [ 6.410241] hub 2-0:1.0: 4 ports detected [ 6.448859] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.454163] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.455366] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.455549] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.468272] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.469256] tegra194-cpufreq ccplex: probed with BWMGR [ 6.470495] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.471126] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.471574] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.472896] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.485442] mmc0: CQHCI version 5.10 [ 6.486990] tegra194-vi5 15c10000.vi: initialized [ 6.489250] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.490170] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.493841] generic_infoframe_type: 0x87 [ 6.500401] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.504287] tegradc 15200000.display: DT parsed successfully [ 6.512160] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.517956] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.524160] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.524166] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.524170] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.532230] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.539907] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.545336] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.545342] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.551802] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.552092] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.596505] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.596905] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.612086] nvethernet 2490000.ethernet: Macsec not supported [ 6.612241] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.617470] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.619625] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.621018] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.621149] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.621279] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.624001] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.624787] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.626455] tegra-se-nvhost 15810000.se: initialized [ 6.631659] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.638804] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.644729] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.693374] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.699840] tegra-se-nvhost 15820000.se: initialized [ 6.706412] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.708343] tegradc 15200000.display: probed [ 6.713375] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.730264] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.736962] tegra-se-nvhost 15830000.se: initialized [ 6.742243] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.746808] mmc0: Command Queue Engine enabled [ 6.747235] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.751217] mmc0: periodic cache flush enabled [ 6.751236] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.758006] tegra-se-nvhost 15840000.se: initialized [ 6.762527] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.769909] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.773472] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.779531] tegra_actmon d230000.actmon: in actmon_register()... [ 6.795488] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.797188] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.810795] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.810848] Console: switching to colour frame buffer device 240x67 [ 6.811433] hvc_sysfs: hypervisor is not present [ 6.818261] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.818266] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.818270] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.818274] usb 1-2: Manufacturer: Generic [ 6.818720] tegradc 15200000.display: fb registered [ 6.820264] hub 1-2:1.0: USB hub found [ 6.821289] hub 1-2:1.0: 4 ports detected [ 6.855139] ALSA device list: [ 6.858482] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.862597] No soundcards found. [ 6.880331] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.885324] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.935324] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.956284] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.957650] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.957867] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.958813] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.959004] Extcon AUX1(HDMI) enable [ 6.959249] tegradc 15210000.display: disp1 connected to head1->sor [ 6.959622] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.959893] tegradc 15210000.display: DT parsed successfully [ 6.960077] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.960969] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.966892] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.972184] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.981386] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.988762] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.993668] usb 2-3: Manufacturer: Generic [ 7.002845] tegradc 15210000.display: probed [ 7.003187] tegradc 15210000.display: fb registered [ 7.009140] hub 2-3:1.0: USB hub found [ 7.010545] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.011491] Freeing unused kernel memory: 3968K [ 7.012928] hub 2-3:1.0: 4 ports detected [ 7.018357] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.018811] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.040159] tegradc 15210000.display: blank - powerdown [ 7.045405] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.053636] Extcon DP: HPD disabled [ 7.057109] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.063767] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.069392] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.070608] Run /init as init process [ 7.074386] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.074392] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.098392] usb 1-3: new full-speed USB device number 3 using tegra-xusb ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.107700] tegradc 15200000.display: blank - powerdown [ 7.145271] Root device found: mmcblk0p1 [ 7.147340] Found dev node: /dev/mmcblk0p1 [ 7.156639] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.156644] Extcon AUX1(HDMI) disable [ 7.180098] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.180995] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.182844] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.186905] Rootfs mounted over mmcblk0p1 [ 7.193793] tegradc 15200000.display: unblank [ 7.194874] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.195086] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.201251] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.203265] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.207223] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.207227] Extcon AUX1(HDMI) enable [ 7.220382] tegradc 15200000.display: sync windows ret = 247 [ 7.227605] Switching from initrd to actual rootfs [ 7.250566] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.252068] Extcon HDMI: HPD enabled [ 7.253390] tegradc 15200000.display: hdmi: plugged [ 7.255560] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.257070] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.264594] usb 1-3: Product: Bluetooth Radio [ 7.268802] usb 1-3: Manufacturer: Realtek [ 7.273151] usb 1-3: SerialNumber: 00e04c000001 [ 7.418242] systemd[1]: System time before build time, advancing clock. [ 7.487657] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.492515] systemd[1]: Detected architecture arm64. [ 7.521552] random: crng init done [ 7.532515] systemd[1]: Set hostname to . [ 7.693597] systemd-sysv-generator[253]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.036047] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.037757] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.043461] systemd[1]: Created slice system-modprobe.slice. [ 8.048196] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.052357] systemd[1]: Created slice User and Session Slice. [ 8.055801] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.060031] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.063454] systemd[1]: Reached target User and Group Name Lookups. [ 8.066746] systemd[1]: Reached target Slices. [ 8.069871] systemd[1]: Reached target Swap. [ 8.073882] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.077652] systemd[1]: Listening on Syslog Socket. [ 8.081344] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.084861] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.089247] systemd[1]: Listening on Journal Audit Socket. [ 8.092896] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.096574] systemd[1]: Listening on Journal Socket. [ 8.100131] systemd[1]: Listening on udev Control Socket. [ 8.103507] systemd[1]: Listening on udev Kernel Socket. [ 8.111843] systemd[1]: Mounting Huge Pages File System... [ 8.121861] systemd[1]: Mounting POSIX Message Queue File System... [ 8.131261] systemd[1]: Mounting RPC Pipe File System... [ 8.139711] systemd[1]: Mounting Kernel Debug File System... [ 8.148281] systemd[1]: Mounting Kernel Trace File System... [ 8.158168] systemd[1]: Starting Journal Service... [ 8.167257] systemd[1]: Starting Set the console keyboard layout... [ 8.175451] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.179004] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.185327] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.193393] systemd[1]: Started Nameserver information manager. [ 8.197794] systemd[1]: Reached target Network (Pre). [ 8.204694] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.206586] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.214891] systemd[1]: Starting Load Kernel Modules... [ 8.222557] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.231006] systemd[1]: Starting udev Coldplug all Devices... [ 8.242103] systemd[1]: Mounted Huge Pages File System. [ 8.246077] systemd[1]: Mounted POSIX Message Queue File System. [ 8.249732] systemd[1]: Mounted RPC Pipe File System. [ 8.250993] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.257904] systemd[1]: Mounted Kernel Debug File System. [ 8.258652] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.261996] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.262003] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.262012] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.262015] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.262273] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.266503] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.270848] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.271587] systemd[1]: Mounted Kernel Trace File System. [ 8.272281] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.283245] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.291286] systemd[1]: nvfb-udev.service: Succeeded. [ 8.295319] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.307918] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.312891] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.314949] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.329528] systemd[1]: Starting Load/Save Random Seed... [ 8.337685] systemd[1]: Starting Create System Users... [ 8.372237] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.372237] [ 8.382908] systemd[1]: Finished Load/Save Random Seed. [ 8.395307] systemd[1]: Finished Create System Users. [ 8.403724] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.411805] systemd[1]: Finished Load Kernel Modules. [ 8.416726] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.423085] systemd[1]: Mounting Kernel Configuration File System... [ 8.431345] systemd[1]: Started OP-TEE Client Supplicant. [ 8.439902] systemd[1]: Starting Apply Kernel Variables... [ 8.450641] systemd[1]: Finished Set the console keyboard layout. [ 8.454662] systemd[1]: Mounted Kernel Configuration File System. [ 8.470194] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.474876] systemd[1]: Reached target Local File Systems (Pre). [ 9.991332] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.011334] imx219 9-0010: board setup failed [ 10.018490] imx219: probe of 9-0010 failed with error -121 [ 10.034495] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.050014] imx219 10-0010: board setup failed [ 10.051323] imx219: probe of 10-0010 failed with error -121 [ 10.161009] hot-surface-alert cooling state: 0 -> 1 [ 10.929805] using random self ethernet address [ 10.964512] using random host ethernet address [ 11.656709] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.657923] Creating 1 MTD partitions on "spi6.0": [ 11.659172] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.372873] using random self ethernet address [ 12.374726] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.817807] nvidia: loading out-of-tree module taints kernel. [ 57.732308] watchdog: watchdog0: watchdog did not stop! [ 58.188521] Trying to unregister non-registered hwtime source [ 61.249369] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.251001] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.045] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.086] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.110] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.327] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.361] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.340] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.341] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.342] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.343] I> dram_block larger than 80000000 [0002.345] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.357] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.360] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized cvc initialized ÿä:20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuration miÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäght be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.211] I> Welcome to NVDisp-Init [0003.211] I> NVDisp-Init version: t194-f9ecfedc [0003.212] I> CPU-BL Params @ 0xca020000 [0003.212] I> 0) Base:0x00000000 Size:0x00000000 [0003.212] I> 1) Base:0xc8300000 Size:0x00100000 [0003.213] I> 2) Base:0xc9800000 Size:0x00200000 [0003.213] I> 3) Base:0xc8600000 Size:0x00200000 [0003.215] I> 4) Base:0xc8200000 Size:0x00100000 [0003.220] I> 5) Base:0xc8100000 Size:0x00100000 [0003.224] I> 6) Base:0xc9400000 Size:0x00400000 [0003.229] I> 7) Base:0xc9000000 Size:0x00400000 [0003.233] I> 8) Base:0xc8000000 Size:0x00100000 [0003.238] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.242] I> 10) Base:0xca800000 Size:0x00800000 [0003.247] I> 11) Base:0x40000000 Size:0x00040000 [0003.251] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.256] I> 13) Base:0x40046000 Size:0x00002000 [0003.260] I> 14) Base:0x40048000 Size:0x00002000 [0003.265] I> 15) Base:0xaf000000 Size:0x00004000 [0003.269] I> 16) Base:0x4004a000 Size:0x00002000 [0003.273] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.278] I> 18) Base:0x4004c000 Size:0x00002000 [0003.282] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.287] I> 20) Base:0x4004e000 Size:0x00002000 [0003.291] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.296] I> 22) Base:0x00000000 Size:0x00000000 [0003.300] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.305] I> 24) Base:0xcc000000 Size:0x02000000 [0003.309] I> 25) Base:0x40050000 Size:0x00002000 [0003.314] I> 26) Base:0x40040000 Size:0x00006000 [0003.318] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.323] I> 28) Base:0xc8400000 Size:0x00200000 [0003.327] I> 29) Base:0xc8800000 Size:0x00400000 [0003.331] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.336] I> 31) Base:0x00000000 Size:0x00000000 [0003.340] I> 32) Base:0xf8000000 Size:0x08000000 [0003.345] I> 33) Base:0xce000000 Size:0x2a000000 [0003.349] I> 34) Base:0xcb000000 Size:0x01000000 [0003.354] I> 35) Base:0xae000000 Size:0x01000000 [0003.358] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.363] I> 37) Base:0xca000000 Size:0x00800000 [0003.367] I> 38) Base:0x80000000 Size:0x20000000 [0003.372] I> 39) Base:0xb0000000 Size:0x08000000 [0003.376] I> 40) Base:0x00000000 Size:0x00000000 [0003.381] I> 41) Base:0x00000000 Size:0x00000000 [0003.385] I> 42) Base:0x00000000 Size:0x00000000 [0003.389] I> 43) Base:0x00000000 Size:0x00000000 [0003.394] I> 44) Base:0x00000000 Size:0x00000000 [0003.398] I> 45) Base:0x00000000 Size:0x00000000 [0003.403] GIC-SPI Target CPU: 0 [0003.406] Interrupts Init done [0003.409] calling constructors [0003.412] initializing heap [0003.414] I> Heap: [0xa0960000 ... 0xadf00000] [0003.419] initializing threads [0003.421] initializing timers [0003.424] creating bootstrap completion thread [0003.428] top of bootstrap2() [0003.431] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.436] initializing platform [0003.439] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.444] W> device prod register failed [0003.448] I> Bl_dtb @0xadf00000 [0003.451] I> gpio framework initialized [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.474] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.495] I> Boot_device: QSPI_FLASH instance: 0 [0003.500] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.510] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.518] I> QSPI source rate = 204000 Khz [0003.521] I> Requested rate for QSPI clock = 34000 Khz [0003.526] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.531] I> tx_clk_tap_delay : 0 [0003.534] I> rx_clk_tap_delay : 16 [0003.537] I> QSPI Flash Size = 32 MB [0003.545] I> Qspi initialized successfully [0003.545] I> qspi flash-0 params source = boot args [0003.550] W> No board IDs available [0003.552] E> Failed to get board id info! [0003.558] I> sdmmc-3 params source = safe params [0003.565] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.566] W> Cannot find any partition table for 00000003 [0003.571] E> Failed to publish 00000003 [0003.576] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> hdmi cable connected [0003.611] W> set volts not configured for 'vdd-1v0' [0003.618] W> set volts not configured for 'vdd-1v8-hs' [0003.619] I> retrieved tmds range from prod_list_hdmi_soc [0003.624] E> invalid display type [0003.625] E> cannot find any other nvdisp nodes [0003.642] I> edid read success [0003.654] I> edid read success [0003.655] I> width = 640, height = 480, frequency = 25174825 [0003.655] I> width = 1920, height = 1080, frequency = 148500000 [0003.655] I> width = 1280, height = 768, frequency = 79500000 [0003.656] I> width = 1360, height = 768, frequency = 85500000 [0003.656] I> width = 720, height = 480, frequency = 26973026 [0003.660] I> width = 720, height = 576, frequency = 26973026 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1280, height = 720, frequency = 74175824 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 1920, height = 1080, frequency = 148351648 [0003.688] I> width = 720, height = 480, frequency = 26973026 [0003.694] I> width = 720, height = 576, frequency = 26973026 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 3840, height = 2160, frequency = 296703296 [0003.723] I> width = 4096, height = 2160, frequency = 296703296 [0003.728] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.740] I> hdmi_enable, starting HDMI initialisation [0003.744] I> hdmi_enable, HDMI initialisation complete [0003.754] initializing target [0003.755] calling apps_init() [0003.756] starting app kernel_boot_app [0003.756] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000026] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000743] Console: colour dummy device 80x25 [ 0.002094] printk: console [tty0] enabled [ 0.002158] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002192] pid_max: default: 32768 minimum: 301 [ 0.002355] LSM: Security Framework initializing [ 0.002420] Yama: becoming mindful. [ 0.002464] SELinux: Initializing. [ 0.002609] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002645] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005445] rcu: Hierarchical SRCU implementation. [ 0.005680] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006555] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006606] DTB Build time: Aug 10 2022 20:31:49 [ 0.009601] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009883] Remapping and enabling EFI services. [ 0.011812] smp: Bringing up secondary CPUs ... [ 0.041137] Detected PIPT I-cache on CPU1 [ 0.041248] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074424] Detected PIPT I-cache on CPU2 [ 0.074575] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104135] Detected PIPT I-cache on CPU3 [ 0.104349] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134105] Detected PIPT I-cache on CPU4 [ 0.134277] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163986] Detected PIPT I-cache on CPU5 [ 0.164089] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164431] smp: Brought up 1 node, 6 CPUs [ 0.164593] SMP: Total of 6 processors activated. [ 0.164638] CPU features: detected: Privileged Access Never [ 0.164658] CPU features: detected: LSE atomic instructions [ 0.164671] CPU features: detected: User Access Override [ 0.164683] CPU features: detected: 32-bit EL0 Support [ 0.164695] CPU features: detected: RAS Extension Support [ 0.164706] CPU features: detected: CRC32 instructions [ 0.164718] CPU features: detected: 32-bit EL1 Support [ 0.233004] CPU: All CPU(s) started at EL2 [ 0.239073] devtmpfs: initialized [ 0.310158] Registered cp15_barrier emulation handler [ 0.310296] Registered setend emulation handler [ 0.310351] KASLR enabled [ 0.310843] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.310882] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.312812] pinctrl core: initialized pinctrl subsystem [ 0.314073] SMBIOS 3.0.0 present. [ 0.314114] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.314918] NET: Registered protocol family 16 [ 0.317573] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.318652] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.319669] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.319756] audit: initializing netlink subsys (disabled) [ 0.320060] audit: type=2000 audit(0.312:1): state=initialized audit_enabled=0 res=1 [ 0.320932] thermal_sys: Registered thermal governor 'step_wise' [ 0.320967] thermal_sys: Registered thermal governor 'power_allocator' [ 0.320994] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.324905] cpuidle: using governor menu [ 0.325363] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.325884] ASID allocator initialised with 32768 entries [ 0.326226] Serial: AMBA PL011 UART driver [ 0.330162] Tegra reboot handler registered. [ 0.401441] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.401560] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.401783] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.401828] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.401949] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.401991] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.402107] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.402167] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.402314] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.402356] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.404607] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.404652] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.404682] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.404708] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.404748] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.404779] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.404802] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.404856] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.404896] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.404919] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.404944] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.404967] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.404989] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.405011] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.405034] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.405056] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.405078] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.405161] mc-err: mcerr ops are set to t19x [ 0.418296] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.418334] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.418348] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.418361] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.426372] ACPI: Interpreter disabled. [ 0.427951] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.429708] iommu: Default domain type: Translated [ 0.429804] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.430389] SCSI subsystem initialized [ 0.430669] usbcore: registered new interface driver usbfs [ 0.430744] usbcore: registered new interface driver hub [ 0.430799] usbcore: registered new device driver usb [ 0.431350] mc: Linux media interface: v0.10 [ 0.431404] videodev: Linux video capture interface: v2.00 [ 0.431852] pps_core: LinuxPPS API ver. 1 registered [ 0.431870] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.431904] PTP clock support registered [ 0.432194] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.432579] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.432691] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.433580] Registered efivars operations [ 0.441122] FPGA manager framework [ 0.441289] Advanced Linux Sound Architecture Driver Initialized. [ 0.442331] Bluetooth: Core ver 2.22 [ 0.442388] NET: Registered protocol family 31 [ 0.442407] Bluetooth: HCI device and connection manager initialized [ 0.442430] Bluetooth: HCI socket layer initialized [ 0.442449] Bluetooth: L2CAP socket layer initialized [ 0.442479] Bluetooth: SCO socket layer initialized [ 0.444653] camchar: rtcpu character device driver loaded [ 0.445765] clocksource: Switched to clocksource arch_sys_counter [ 0.881722] VFS: Disk quotas dquot_6.6.0 [ 0.881869] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.882394] pnp: PnP ACPI: disabled [ 0.897345] la/ptsa driver initialized. [ 0.897504] NET: Registered protocol family 2 [ 0.897749] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.905481] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.905581] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.905976] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.906618] TCP: Hash tables configured (established 65536 bind 65536) [ 0.906819] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.906959] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.907238] NET: Registered protocol family 1 [ 0.908142] RPC: Registered named UNIX socket transport module. [ 0.908174] RPC: Registered udp transport module. [ 0.908187] RPC: Registered tcp transport module. [ 0.908200] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.908238] PCI: CLS 0 bytes, default 64 [ 0.908624] Trying to unpack rootfs image as initramfs... [ 1.175586] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.178751] Freeing initrd memory: 8196K [ 1.183040] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.183073] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.183109] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.183416] kvm [1]: IPA Size Limit: 40 bits [ 1.183854] kvm [1]: vgic interrupt IRQ9 [ 1.184319] kvm [1]: VHE mode initialized successfully [ 1.185953] Initialise system trusted keyrings [ 1.186307] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.192172] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.192974] NFS: Registering the id_resolver key type [ 1.193012] Key type id_resolver registered [ 1.193026] Key type id_legacy registered [ 1.193133] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.193157] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.193197] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.203158] NET: Registered protocol family 38 [ 1.203189] Key type asymmetric registered [ 1.203206] Asymmetric key parser 'x509' registered [ 1.203256] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.203488] io scheduler mq-deadline registered [ 1.203505] io scheduler kyber registered [ 1.209281] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.212275] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.212352] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.212434] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.212503] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.212577] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.218473] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.218479] scrncapt: init (heads:4 wins:6 planes:4) [ 1.219580] EINJ: ACPI disabled. [ 1.223095] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.223123] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.223137] tegra-pmc: ### PMC reset level: L1 [ 1.223151] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.223203] tegra-pmc: PMC Prod config success [ 1.228655] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.235312] random: fast init done [ 1.245811] printk: console [ttyTCU0] enabled [ 2.786370] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.790478] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.795105] arm-smmu 10000000.iommu: stage 1 translation [ 2.800934] arm-smmu 10000000.iommu: stage 2 translation [ 2.806049] arm-smmu 10000000.iommu: nested translation [ 2.811648] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.818813] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.829399] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.831944] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.838245] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.846253] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.851301] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.856002] arm-smmu 12000000.iommu: stage 1 translation [ 2.861774] arm-smmu 12000000.iommu: stage 2 translation [ 2.866941] arm-smmu 12000000.iommu: nested translation [ 2.872633] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.879806] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.890242] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.892642] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.899511] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.906666] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.916670] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.919942] tegra_profiler: auth: init [ 2.924166] THERMAL EST: found 3 subdevs [ 2.927323] THERMAL EST num_resources: 0 [ 2.931431] [THERMAL EST subdev 0] [ 2.934517] [THERMAL EST subdev 1] [ 2.938158] [THERMAL EST subdev 2] [ 2.941125] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.947586] THERMAL EST: thz register success. [ 2.951841] THERMAL EST: end of probe, return err: 0 [ 2.957464] nvsciipc: loaded module [ 2.964538] tun: Universal TUN/TAP device driver, 1.6 [ 2.966768] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.972911] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.978744] e1000e: Intel(R) PRO/1000 Network Driver [ 2.983404] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.989483] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.995043] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.001305] PPP generic driver version 2.4.2 [ 3.005249] PPP BSD Compression module registered [ 3.010013] PPP Deflate Compression module registered [ 3.015254] PPP MPPE Compression module registered [ 3.020014] usbcore: registered new interface driver r8152 [ 3.025806] usbcore: registered new interface driver asix [ 3.030878] usbcore: registered new interface driver ax88179_178a [ 3.036978] usbcore: registered new interface driver cdc_ether [ 3.043191] usbcore: registered new interface driver net1080 [ 3.048785] usbcore: registered new interface driver cdc_subset [ 3.054586] usbcore: registered new interface driver zaurus [ 3.060267] usbcore: registered new interface driver cdc_ncm [ 3.065949] usbcore: registered new interface driver aqc111 [ 3.071632] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.077914] ohci-pci: OHCI PCI platform driver [ 3.082248] ohci-platform: OHCI generic platform driver [ 3.088117] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.094214] usbcore: registered new interface driver uas [ 3.098264] usbcore: registered new interface driver usb-storage [ 3.104686] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.110371] mousedev: PS/2 mouse device common for all mice [ 3.115415] usbcore: registered new interface driver xpad [ 3.123637] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.126413] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.134190] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.140784] i2c /dev entries driver [ 3.144115] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.149850] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.155204] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.160634] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.165941] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.171407] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.176831] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.190250] device-mapper: uevent: version 1.0.3 [ 3.190675] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.197080] cpuidle: Initializing cpuidle driver [ 3.201166] sdhci: Secure Digital Host Controller Interface driver [ 3.205770] sdhci: Copyright(c) Pierre Ossman [ 3.210111] Synopsys Designware Multimedia Card Interface Driver [ 3.216073] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.222060] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.227936] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.235343] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.257388] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.266926] vdd-1v0: supplied by regulator-dummy [ 3.272445] vdd-1v8-hs: supplied by regulator-dummy [ 3.277210] vdd-1v8-ls: supplied by regulator-dummy [ 3.281976] vdd-1v8-ao: supplied by regulator-dummy [ 3.285940] vddio-ddr-1v1: supplied by regulator-dummy [ 3.290361] vdd-rtc: supplied by regulator-dummy [ 3.292169] spmic-ldo1: supplied by regulator-dummy [ 3.293358] vdd-ao-3v3: supplied by regulator-dummy [ 3.299514] vddio-emmc-3v3: supplied by regulator-dummy [ 3.305914] spmic-ldo4: supplied by regulator-dummy [ 3.307122] vdd-usb-3v3: supplied by regulator-dummy [ 3.313260] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.319526] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.324981] spmic-ldo8: supplied by vdd-1v8-ls [ 3.326612] gpio-510 (gpio_default): hogged as output/high [ 3.328084] gpio-511 (gpio_default): hogged as output/high [ 3.330991] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.468489] max77686-rtc max77620-rtc: registered as rtc0 [ 3.470003] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.470377] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.297723] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.298868] hid: raw HID events driver (C) Jiri Kosina [ 4.299662] usbcore: registered new interface driver usbhid [ 4.299803] usbhid: USB HID core driver [ 4.302040] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.303327] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.404626] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.478964] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 75.145 ms) ÿá[ 4.387552] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.388201] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.389404] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.390268] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.391924] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.392573] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.393225] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.394733] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.394993] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.398095] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.404230] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.410438] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.415274] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.421714] denver_knobs_init:MTS_VERSION:55637613 [ 4.433629] t19x_cache tegra-cache: probed [ 4.436467] optee: probing for conduit method. [ 4.437347] optee: revision 3.16 (65cc2218) [ 4.438386] optee: dynamic shared memory is enabled [ 4.442635] optee: initialized driver [ 4.448954] nvpmodel: initialized successfully [ 4.450398] tegra_hv: get_hvd: not initialized yet [ 4.454985] user_ivc_mempool: hypervisor not present [ 4.460626] usbcore: registered new interface driver snd-usb-audio [ 4.467185] u32 classifier [ 4.468513] input device check on [ 4.472354] Actions configured [ 4.476262] Initializing XFRM netlink socket [ 4.481021] NET: Registered protocol family 10 [ 4.487638] Segment Routing with IPv6 [ 4.488420] NET: Registered protocol family 17 [ 4.492587] NET: Registered protocol family 15 [ 4.496880] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.510185] Bluetooth: RFCOMM socket layer initialized [ 4.515349] Bluetooth: RFCOMM ver 1.11 [ 4.518966] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.525120] Bluetooth: HIDP socket layer initialized [ 4.530681] 9pnet: Installing 9P2000 support [ 4.534294] Key type dns_resolver registered [ 4.539971] registered taskstats version 1 [ 4.542739] Loading compiled-in X.509 certificates [ 4.554200] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.558644] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.568715] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.570959] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.579180] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.587827] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.702081] tegra194-pcie 14160000.pcie: Link up [ 4.705163] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.705373] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.705528] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.705729] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.705968] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.706305] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.706715] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.719778] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.720271] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.720729] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.722254] pci 0004:01:00.0: supports D1 D2 [ 4.722390] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.731029] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.731290] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.731481] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.731808] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.732051] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.732226] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.736953] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.744301] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.752579] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.762720] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.767345] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.773241] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.780023] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.788962] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.790791] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.798967] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.807724] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.922650] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.923275] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.923623] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.923760] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.923998] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.924320] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.924708] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.925196] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.948405] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.948738] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.951044] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.952176] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.953747] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.955432] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.956355] pci 0005:00:00.0: Removing from iommu group 7 [ 5.956721] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.993591] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.016573] host1x 13e10000.host1x: initialized [ 6.018504] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.019276] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.020609] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.021233] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.022677] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.023497] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.025057] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.026019] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.027247] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.028157] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.032677] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.039721] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.049628] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.056742] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.066973] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.073830] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.083704] falcon 15340000.vic: Adding to iommu group 17 [ 6.098407] falcon 15340000.vic: initialized [ 6.099333] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.105095] falcon 15380000.nvjpg: initialized [ 6.105681] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.116077] falcon 154c0000.nvenc: initialized [ 6.116725] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.126140] falcon 15a80000.nvenc1: initialized [ 6.126730] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.139007] nvdec 15480000.nvdec: initialized [ 6.139576] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.149903] nvdec 15140000.nvdec1: initialized [ 6.150531] tsec 15500000.tsec: Adding to iommu group 18 [ 6.156914] tsec 15500000.tsec: initialized [ 6.157424] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.164066] tsec 15100000.tsecb: initialized [ 6.168452] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.198194] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.211470] gpio-374 (wifi-enable): hogged as output/high [ 6.211737] gpio-431 (camera-control-output-low): hogged as output/low [ 6.211994] gpio-432 (camera-control-output-low): hogged as output/low [ 6.213810] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.215373] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.215915] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.217181] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.220008] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.226182] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.231698] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.239790] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.247038] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.258539] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.264056] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.270087] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.278494] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.287778] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.294934] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.302737] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.308811] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.318761] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.324683] pva 16000000.pva0: Adding to iommu group 22 [ 6.352930] pva 16000000.pva0: initialized [ 6.357639] pva 16800000.pva1: Adding to iommu group 23 [ 6.376486] pva 16800000.pva1: initialized [ 6.380080] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.393129] nvdla 15880000.nvdla0: initialized [ 6.394431] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.404450] nvdla 158c0000.nvdla1: initialized [ 6.408637] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.408910] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.409315] tegradccommon 15200000.display-hub: dma mapping done [ 6.409536] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.409926] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.411186] tegradc 15200000.display: Adding to iommu group 26 [ 6.411590] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.412745] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.414817] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.419696] tegradc 15210000.display: Adding to iommu group 26 [ 6.419859] tegra_cec 3960000.tegra_cec: probed [ 6.420132] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.420273] generic_infoframe_type: 0x87 [ 6.420368] tegradc 15200000.display: DT parsed successfully [ 6.420469] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.424186] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.424197] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.424201] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.425169] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.425178] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.426352] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.431581] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.439929] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.443420] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.447339] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.455436] kfuse 3830000.kfuse: initialized [ 6.464632] tegradc 15210000.display: disp0 connected to head1->sor [ 6.471941] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.479820] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.485257] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.485985] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.491703] tegradc 15210000.display: DT parsed successfully [ 6.514863] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.521415] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.566758] random: crng init done [ 6.573279] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.598008] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.606988] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.612816] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.632388] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.632747] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.636078] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.644130] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.652942] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.659202] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.666915] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.674083] usb usb1: Product: xHCI Host Controller [ 6.679305] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.685361] usb usb1: SerialNumber: 3610000.xhci [ 6.691030] hub 1-0:1.0: USB hub found [ 6.693993] hub 1-0:1.0: 4 ports detected [ 6.698604] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.703306] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.711180] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.718969] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.726778] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.734017] usb usb2: Product: xHCI Host Controller [ 6.738722] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.744939] usb usb2: SerialNumber: 3610000.xhci [ 6.750661] hub 2-0:1.0: USB hub found [ 6.753632] hub 2-0:1.0: 4 ports detected [ 6.796010] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.802199] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.803872] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.804077] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.817120] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.818244] tegra194-cpufreq ccplex: probed with BWMGR [ 6.819507] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.820008] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.820506] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.821639] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.828954] tegra194-vi5 15c10000.vi: initialized [ 6.830669] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.830972] mmc0: CQHCI version 5.10 [ 6.831935] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.832167] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.832173] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.832179] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.832184] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.832188] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.833574] generic_infoframe_type: 0x87 [ 6.837871] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.843746] tegradc 15200000.display: DT parsed successfully [ 6.851697] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.858257] tegradc 15200000.display: Display dc.000000004fc60c26 registered with id=0 [ 6.865541] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.877968] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.882988] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.888255] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.888262] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.947496] nvethernet 2490000.ethernet: Macsec not supported [ 6.948439] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.954540] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.959557] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.962067] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.968645] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.973740] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.981420] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.005289] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.005793] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 7.006084] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 7.006088] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 7.012960] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.020771] tegradc 15200000.display: probed [ 7.027868] tegra-se-nvhost 15810000.se: initialized [ 7.054404] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.055537] mmc0: Command Queue Engine enabled [ 7.055963] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.060179] mmc0: periodic cache flush enabled [ 7.070548] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.077284] tegra-se-nvhost 15820000.se: initialized [ 7.077689] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.083743] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.087044] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.093630] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.106834] Console: switching to colour frame buffer device 240x67 [ 7.107930] tegra-se-nvhost 15830000.se: initialized [ 7.111725] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.112605] tegradc 15200000.display: fb registered [ 7.112664] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.118604] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.126534] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.131012] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.136103] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.143166] tegra-se-nvhost 15840000.se: initialized [ 7.166584] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.172911] tegra_actmon d230000.actmon: in actmon_register()... [ 7.177386] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.183327] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.185514] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.191527] hvc_sysfs: hypervisor is not present [ 7.199398] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.199408] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.206807] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.211379] usb 1-2: Manufacturer: Generic [ 7.231180] hub 1-2:1.0: USB hub found [ 7.233805] hub 1-2:1.0: 4 ports detected [ 7.261238] ALSA device list: [ 7.261336] No soundcards found. [ 7.262455] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.262667] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.263655] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.266086] Extcon AUX1(HDMI) enable [ 7.269902] tegradc 15210000.display: disp1 connected to head1->sor [ 7.276397] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.283137] tegradc 15210000.display: DT parsed successfully [ 7.289115] tegradc 15210000.display: Display dc.00000000625d9886 registered with id=1 [ 7.297164] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.302753] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.303015] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.323371] tegradc 15210000.display: probed [ 7.323679] tegradc 15210000.display: fb registered [ 7.329370] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.333270] Freeing unused kernel memory: 3968K [ 7.337922] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.345792] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.347315] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.359372] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.359376] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.359379] usb 2-3: Manufacturer: Generic [ 7.359397] tegradc 15210000.display: blank - powerdown [ 7.359510] Run /init as init process [ 7.366551] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.370125] hub 2-3:1.0: USB hub found [ 7.371906] hub 2-3:1.0: 4 ports detected [ 7.375271] Extcon DP: HPD disabled [ 7.375316] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.384118] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.396196] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.423831] tegradc 15200000.display: blank - powerdown [ 7.429817] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.465813] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.473897] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.473902] Extcon AUX1(HDMI) disable [ 7.494354] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.494359] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.497196] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.498064] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.511254] tegradc 15200000.display: unblank [ 7.512274] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.512470] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.518605] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.520457] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.524544] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.524547] Extcon AUX1(HDMI) enable [ 7.537202] tegradc 15200000.display: sync windows ret = 247 [ 7.566215] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.567646] Extcon HDMI: HPD enabled [ 7.568995] tegradc 15200000.display: hdmi: plugged [ 7.614959] Root device found: mmcblk0p1 [ 7.618385] Found dev node: /dev/mmcblk0p1 [ 7.620689] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.622152] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.623553] usb 1-3: Product: Bluetooth Radio [ 7.624884] usb 1-3: Manufacturer: Realtek [ 7.626216] usb 1-3: SerialNumber: 00e04c000001 [ 7.656420] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.661872] Rootfs mounted over mmcblk0p1 [ 7.706283] Switching from initrd to actual rootfs [ 7.849571] systemd[1]: System time before build time, advancing clock. [ 7.924909] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.929895] systemd[1]: Detected architecture arm64. [ 7.968027] systemd[1]: Set hostname to . [ 8.131545] systemd-sysv-generator[241]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.474768] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.476441] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.481972] systemd[1]: Created slice system-modprobe.slice. [ 8.486563] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.490607] systemd[1]: Created slice User and Session Slice. [ 8.494077] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.498154] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.501459] systemd[1]: Reached target User and Group Name Lookups. [ 8.504634] systemd[1]: Reached target Slices. [ 8.507711] systemd[1]: Reached target Swap. [ 8.511690] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.515251] systemd[1]: Listening on Syslog Socket. [ 8.518761] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.522132] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.526275] systemd[1]: Listening on Journal Audit Socket. [ 8.529744] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.533474] systemd[1]: Listening on Journal Socket. [ 8.537079] systemd[1]: Listening on udev Control Socket. [ 8.540502] systemd[1]: Listening on udev Kernel Socket. [ 8.548583] systemd[1]: Mounting Huge Pages File System... [ 8.556687] systemd[1]: Mounting POSIX Message Queue File System... [ 8.566161] systemd[1]: Mounting RPC Pipe File System... [ 8.575987] systemd[1]: Mounting Kernel Debug File System... [ 8.584566] systemd[1]: Mounting Kernel Trace File System... [ 8.594532] systemd[1]: Starting Journal Service... [ 8.603353] systemd[1]: Starting Set the console keyboard layout... [ 8.611645] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.615216] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.621680] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.630575] systemd[1]: Started Nameserver information manager. [ 8.635160] systemd[1]: Reached target Network (Pre). [ 8.642021] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.643834] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.651876] systemd[1]: Starting Load Kernel Modules... [ 8.659797] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.668596] systemd[1]: Starting udev Coldplug all Devices... [ 8.678542] systemd[1]: Mounted Huge Pages File System. [ 8.682338] systemd[1]: Mounted POSIX Message Queue File System. [ 8.685970] systemd[1]: Mounted RPC Pipe File System. [ 8.688245] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.694299] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.694540] systemd[1]: Mounted Kernel Debug File System. [ 8.696176] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.698711] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.698722] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.698725] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.698937] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.699121] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.699275] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.699283] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.713850] systemd[1]: Mounted Kernel Trace File System. [ 8.721966] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.728791] systemd[1]: nvfb-udev.service: Succeeded. [ 8.734587] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.746638] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.759026] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.760780] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.768607] systemd[1]: Starting Load/Save Random Seed... [ 8.776531] systemd[1]: Starting Create System Users... [ 8.793609] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.793609] [ 8.836492] systemd[1]: Finished Load Kernel Modules. [ 8.843350] systemd[1]: Finished Load/Save Random Seed. [ 8.848552] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.855247] systemd[1]: Mounting Kernel Configuration File System... [ 8.864344] systemd[1]: Started OP-TEE Client Supplicant. [ 8.873309] systemd[1]: Starting Apply Kernel Variables... [ 8.884198] systemd[1]: Finished Set the console keyboard layout. [ 8.888472] systemd[1]: Mounted Kernel Configuration File System. [ 8.902775] systemd[1]: Finished Create System Users. [ 10.240161] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.247299] imx219 9-0010: board setup failed [ 10.248624] imx219: probe of 9-0010 failed with error -121 [ 10.268720] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.275155] imx219 10-0010: board setup failed [ 10.276423] imx219: probe of 10-0010 failed with error -121 [ 10.315192] hot-surface-alert cooling state: 0 -> 1 [ 11.084884] using random self ethernet address [ 11.086241] using random host ethernet address [ 11.784810] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.786262] Creating 1 MTD partitions on "spi6.0": [ 11.787716] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.678151] using random self ethernet address [ 12.679717] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.858085] nvidia: loading out-of-tree module taints kernel. [ 59.747803] watchdog: watchdog0: watchdog did not stop! [ 60.242405] Trying to unregister non-registered hwtime source [ 63.300299] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.301840] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 67500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: Thÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäis OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.211] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.263] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.308] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.321] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.330] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.379] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.388] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.417] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.427] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.557] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.745] initializing target [0003.746] calling apps_init() [0003.747] starting app kernel_boot_app [0003.747] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000729] Console: colour dummy device 80x25 [ 0.002215] printk: console [tty0] enabled [ 0.002293] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002327] pid_max: default: 32768 minimum: 301 [ 0.002524] LSM: Security Framework initializing [ 0.002604] Yama: becoming mindful. [ 0.002647] SELinux: Initializing. [ 0.002800] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002853] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005880] rcu: Hierarchical SRCU implementation. [ 0.006137] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007079] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007110] DTB Build time: Aug 10 2022 20:31:49 [ 0.011441] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011733] Remapping and enabling EFI services. [ 0.014347] smp: Bringing up secondary CPUs ... [ 0.044284] Detected PIPT I-cache on CPU1 [ 0.044395] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073864] Detected PIPT I-cache on CPU2 [ 0.074018] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103608] Detected PIPT I-cache on CPU3 [ 0.103700] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133366] Detected PIPT I-cache on CPU4 [ 0.133534] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163232] Detected PIPT I-cache on CPU5 [ 0.163334] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163724] smp: Brought up 1 node, 6 CPUs [ 0.163951] SMP: Total of 6 processors activated. [ 0.164027] CPU features: detected: Privileged Access Never [ 0.164065] CPU features: detected: LSE atomic instructions [ 0.164077] CPU features: detected: User Access Override [ 0.164090] CPU features: detected: 32-bit EL0 Support [ 0.164101] CPU features: detected: RAS Extension Support [ 0.164113] CPU features: detected: CRC32 instructions [ 0.164125] CPU features: detected: 32-bit EL1 Support [ 0.240998] CPU: All CPU(s) started at EL2 [ 0.246887] devtmpfs: initialized [ 0.294610] Registered cp15_barrier emulation handler [ 0.294737] Registered setend emulation handler [ 0.294758] KASLR enabled [ 0.295047] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.295070] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.296455] pinctrl core: initialized pinctrl subsystem [ 0.297529] SMBIOS 3.0.0 present. [ 0.297557] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.298201] NET: Registered protocol family 16 [ 0.300146] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.300645] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.301575] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.301634] audit: initializing netlink subsys (disabled) [ 0.301928] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.302428] thermal_sys: Registered thermal governor 'step_wise' [ 0.302435] thermal_sys: Registered thermal governor 'power_allocator' [ 0.302466] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.304662] cpuidle: using governor menu [ 0.304991] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.305504] ASID allocator initialised with 32768 entries [ 0.305751] Serial: AMBA PL011 UART driver [ 0.309733] Tegra reboot handler registered. [ 0.384927] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.385088] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.385274] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.385319] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.385435] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.385477] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.385615] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.385675] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.385806] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.385848] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.388638] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.388685] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.388713] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.388775] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.388804] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.388842] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.388873] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.388917] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.388942] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.388967] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.388992] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.389016] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.389040] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.389062] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.389086] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.389110] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.389133] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.389222] mc-err: mcerr ops are set to t19x [ 0.402410] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.402435] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.402449] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.402460] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.408663] ACPI: Interpreter disabled. [ 0.410158] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.411588] iommu: Default domain type: Translated [ 0.411661] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.412043] SCSI subsystem initialized [ 0.412220] usbcore: registered new interface driver usbfs [ 0.412267] usbcore: registered new interface driver hub [ 0.412303] usbcore: registered new device driver usb [ 0.412988] mc: Linux media interface: v0.10 [ 0.413021] videodev: Linux video capture interface: v2.00 [ 0.413495] pps_core: LinuxPPS API ver. 1 registered [ 0.413509] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.413545] PTP clock support registered [ 0.413836] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.414119] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.414213] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.414912] Registered efivars operations [ 0.420397] FPGA manager framework [ 0.420548] Advanced Linux Sound Architecture Driver Initialized. [ 0.421175] Bluetooth: Core ver 2.22 [ 0.421216] NET: Registered protocol family 31 [ 0.421227] Bluetooth: HCI device and connection manager initialized [ 0.421242] Bluetooth: HCI socket layer initialized [ 0.421257] Bluetooth: L2CAP socket layer initialized [ 0.421279] Bluetooth: SCO socket layer initialized [ 0.424317] camchar: rtcpu character device driver loaded [ 0.425587] clocksource: Switched to clocksource arch_sys_counter [ 0.847024] VFS: Disk quotas dquot_6.6.0 [ 0.847134] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.847607] pnp: PnP ACPI: disabled [ 0.863698] la/ptsa driver initialized. [ 0.863889] NET: Registered protocol family 2 [ 0.864124] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.874024] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.874116] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.874478] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.875127] TCP: Hash tables configured (established 65536 bind 65536) [ 0.875273] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.875403] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.875664] NET: Registered protocol family 1 [ 0.876439] RPC: Registered named UNIX socket transport module. [ 0.876473] RPC: Registered udp transport module. [ 0.876492] RPC: Registered tcp transport module. [ 0.876509] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.876537] PCI: CLS 0 bytes, default 64 [ 0.876851] Trying to unpack rootfs image as initramfs... [ 1.139453] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.142517] Freeing initrd memory: 8196K [ 1.147917] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.147979] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.148023] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.148419] kvm [1]: IPA Size Limit: 40 bits [ 1.149014] kvm [1]: vgic interrupt IRQ9 [ 1.149650] kvm [1]: VHE mode initialized successfully [ 1.151175] Initialise system trusted keyrings [ 1.151507] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.158274] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.159219] NFS: Registering the id_resolver key type [ 1.159262] Key type id_resolver registered [ 1.159279] Key type id_legacy registered [ 1.159367] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.159395] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.159437] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.169267] NET: Registered protocol family 38 [ 1.169295] Key type asymmetric registered [ 1.169313] Asymmetric key parser 'x509' registered [ 1.169365] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.169681] io scheduler mq-deadline registered [ 1.169701] io scheduler kyber registered [ 1.175734] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.178735] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.178815] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.178886] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.178954] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.179022] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.184631] scrncapt: init (heads:4 wins:6 planes:4) [ 1.184687] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.185821] EINJ: ACPI disabled. [ 1.189485] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.189572] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.189589] tegra-pmc: ### PMC reset level: L1 [ 1.189603] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.189655] tegra-pmc: PMC Prod config success [ 1.194684] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.203085] random: fast init done [ 1.211989] printk: console [ttyTCU0] enabled [ 2.752194] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.756712] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.761348] arm-smmu 10000000.iommu: stage 1 translation [ 2.766987] arm-smmu 10000000.iommu: stage 2 translation [ 2.772230] arm-smmu 10000000.iommu: nested translation [ 2.777837] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.784999] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.795367] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.797883] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.804685] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.812084] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.817724] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.822447] arm-smmu 12000000.iommu: stage 1 translation [ 2.827698] arm-smmu 12000000.iommu: stage 2 translation [ 2.833381] arm-smmu 12000000.iommu: nested translation [ 2.838569] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.845989] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.856501] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.858851] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.865669] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.872859] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.882832] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.886120] tegra_profiler: auth: init [ 2.890366] THERMAL EST: found 3 subdevs [ 2.893480] THERMAL EST num_resources: 0 [ 2.897625] [THERMAL EST subdev 0] [ 2.900655] [THERMAL EST subdev 1] [ 2.904345] [THERMAL EST subdev 2] [ 2.907330] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.913764] THERMAL EST: thz register success. [ 2.918025] THERMAL EST: end of probe, return err: 0 [ 2.923585] nvsciipc: loaded module [ 2.930451] tun: Universal TUN/TAP device driver, 1.6 [ 2.933254] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.939098] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.944933] e1000e: Intel(R) PRO/1000 Network Driver [ 2.949602] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.955963] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.961218] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.967452] PPP generic driver version 2.4.2 [ 2.971683] PPP BSD Compression module registered [ 2.975942] PPP Deflate Compression module registered [ 2.981188] PPP MPPE Compression module registered [ 2.986452] usbcore: registered new interface driver r8152 [ 2.991712] usbcore: registered new interface driver asix [ 2.997302] usbcore: registered new interface driver ax88179_178a [ 3.003427] usbcore: registered new interface driver cdc_ether [ 3.009113] usbcore: registered new interface driver net1080 [ 3.014712] usbcore: registered new interface driver cdc_subset [ 3.021007] usbcore: registered new interface driver zaurus [ 3.026711] usbcore: registered new interface driver cdc_ncm [ 3.032387] usbcore: registered new interface driver aqc111 [ 3.038047] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.043864] ohci-pci: OHCI PCI platform driver [ 3.048396] ohci-platform: OHCI generic platform driver [ 3.054308] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.060549] usbcore: registered new interface driver uas [ 3.064457] usbcore: registered new interface driver usb-storage [ 3.070639] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.076923] mousedev: PS/2 mouse device common for all mice [ 3.081884] usbcore: registered new interface driver xpad [ 3.089629] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.092338] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.100142] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.106708] i2c /dev entries driver [ 3.110056] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.115852] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.121493] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.126811] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.132159] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.137712] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.143080] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.156377] device-mapper: uevent: version 1.0.3 [ 3.156844] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.163277] cpuidle: Initializing cpuidle driver [ 3.167587] sdhci: Secure Digital Host Controller Interface driver [ 3.172194] sdhci: Copyright(c) Pierre Ossman [ 3.176037] Synopsys Designware Multimedia Card Interface Driver [ 3.182238] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.188501] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.189426] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.201486] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.219391] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.228287] vdd-1v0: supplied by regulator-dummy [ 3.233624] vdd-1v8-hs: supplied by regulator-dummy [ 3.238237] vdd-1v8-ls: supplied by regulator-dummy [ 3.242919] vdd-1v8-ao: supplied by regulator-dummy [ 3.246671] vddio-ddr-1v1: supplied by regulator-dummy [ 3.250913] vdd-rtc: supplied by regulator-dummy [ 3.252497] spmic-ldo1: supplied by regulator-dummy [ 3.253594] vdd-ao-3v3: supplied by regulator-dummy [ 3.259639] vddio-emmc-3v3: supplied by regulator-dummy [ 3.265710] spmic-ldo4: supplied by regulator-dummy [ 3.266972] vdd-usb-3v3: supplied by regulator-dummy [ 3.273177] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.279179] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.284568] spmic-ldo8: supplied by vdd-1v8-ls [ 3.285878] gpio-510 (gpio_default): hogged as output/high [ 3.288161] gpio-511 (gpio_default): hogged as output/high [ 3.295304] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.433611] max77686-rtc max77620-rtc: registered as rtc0 [ 3.434583] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.434890] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.128514] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.129551] hid: raw HID events driver (C) Jiri Kosina [ 4.130197] usbcore: registered new interface driver usbhid [ 4.130348] usbhid: USB HID core driver [ 4.132069] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.133141] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.204172] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.279816] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.454 ms) ÿá[ 4.218207] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.218703] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.219568] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.220237] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.221897] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.222578] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.223085] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.224236] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.224517] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.226403] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.234612] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.240757] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.245992] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.252872] denver_knobs_init:MTS_VERSION:55637613 [ 4.265596] t19x_cache tegra-cache: probed [ 4.268208] optee: probing for conduit method. [ 4.269002] optee: revision 3.16 (65cc2218) [ 4.269872] optee: dynamic shared memory is enabled [ 4.273636] optee: initialized driver [ 4.280607] nvpmodel: initialized successfully [ 4.281130] tegra_hv: get_hvd: not initialized yet [ 4.285869] user_ivc_mempool: hypervisor not present [ 4.291648] usbcore: registered new interface driver snd-usb-audio [ 4.298465] u32 classifier [ 4.299352] input device check on [ 4.303053] Actions configured [ 4.306943] Initializing XFRM netlink socket [ 4.311767] NET: Registered protocol family 10 [ 4.317955] Segment Routing with IPv6 [ 4.319184] NET: Registered protocol family 17 [ 4.323254] NET: Registered protocol family 15 [ 4.327878] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.341865] Bluetooth: RFCOMM socket layer initialized [ 4.346128] Bluetooth: RFCOMM ver 1.11 [ 4.349801] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.355899] Bluetooth: HIDP socket layer initialized [ 4.361658] 9pnet: Installing 9P2000 support [ 4.365288] Key type dns_resolver registered [ 4.370356] registered taskstats version 1 [ 4.373485] Loading compiled-in X.509 certificates [ 4.385392] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.389448] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.399609] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.401757] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.410017] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.418675] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.533612] tegra194-pcie 14160000.pcie: Link up [ 4.536626] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.536808] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.536947] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.537178] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.537340] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.537704] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.538112] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.551298] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.551767] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.552235] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.553789] pci 0004:01:00.0: supports D1 D2 [ 4.553916] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.562229] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.562581] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.562872] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.563223] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.563495] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.563658] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.568512] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.575823] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.584088] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.594380] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.599269] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.604637] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.611384] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.620297] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.622193] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.630540] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.639249] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.754584] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.755165] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.755358] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.755549] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.755856] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.756138] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.756600] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.757034] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.776555] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.776930] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.778628] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.779800] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.780911] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.782616] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.783672] pci 0005:00:00.0: Removing from iommu group 7 [ 5.783972] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.818333] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.842601] host1x 13e10000.host1x: initialized [ 5.844233] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.845098] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.846494] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.847124] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.848658] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.849393] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.851001] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.851778] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.852664] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.854582] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.864601] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.872252] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.881931] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.888999] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.898763] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.905916] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.915810] falcon 15340000.vic: Adding to iommu group 17 [ 5.931322] falcon 15340000.vic: initialized [ 5.932283] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.937958] falcon 15380000.nvjpg: initialized [ 5.938576] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.948361] falcon 154c0000.nvenc: initialized [ 5.949012] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.958523] falcon 15a80000.nvenc1: initialized [ 5.959169] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.971117] nvdec 15480000.nvdec: initialized [ 5.971714] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.983618] nvdec 15140000.nvdec1: initialized [ 5.984085] tsec 15500000.tsec: Adding to iommu group 18 [ 5.990288] tsec 15500000.tsec: initialized [ 5.990951] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.996517] tsec 15100000.tsecb: initialized [ 6.000354] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.028024] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.041113] gpio-374 (wifi-enable): hogged as output/high [ 6.041448] gpio-431 (camera-control-output-low): hogged as output/low [ 6.041801] gpio-432 (camera-control-output-low): hogged as output/low [ 6.043554] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.045987] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.046727] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.048152] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.052024] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.058182] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.063685] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.071971] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.079124] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.090917] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.095994] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.101910] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.110510] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.120058] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.127182] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.134709] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.141029] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.150587] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.156956] pva 16000000.pva0: Adding to iommu group 22 [ 6.186088] pva 16000000.pva0: initialized [ 6.190714] pva 16800000.pva1: Adding to iommu group 23 [ 6.202375] pva 16800000.pva1: initialized [ 6.206280] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.219181] nvdla 15880000.nvdla0: initialized [ 6.220442] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.230258] nvdla 158c0000.nvdla1: initialized [ 6.233655] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.233914] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.234032] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.234465] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.234579] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.234595] tegradc 15200000.display: Adding to iommu group 26 [ 6.234907] tegradccommon 15200000.display-hub: dma mapping done [ 6.235984] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.242998] tegradc 15210000.display: Adding to iommu group 26 [ 6.243071] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.243190] generic_infoframe_type: 0x87 [ 6.243295] tegradc 15200000.display: DT parsed successfully [ 6.243415] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.247093] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.253400] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.258638] tegra_cec 3960000.tegra_cec: probed [ 6.262715] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.262745] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.269522] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.277365] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.284342] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.290265] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.295373] kfuse 3830000.kfuse: initialized [ 6.304767] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.312327] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.320622] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.322852] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.323584] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.330301] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.336773] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.343202] tegradc 15210000.display: disp0 connected to head1->sor [ 6.353453] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.358142] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.377253] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.384315] tegradc 15210000.display: DT parsed successfully [ 6.394463] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.399421] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.421197] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.461675] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.462016] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.464214] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.472963] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.481412] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.488274] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.495425] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.502811] usb usb1: Product: xHCI Host Controller [ 6.507691] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.513983] usb usb1: SerialNumber: 3610000.xhci [ 6.519704] hub 1-0:1.0: USB hub found [ 6.522857] hub 1-0:1.0: 4 ports detected [ 6.527450] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.532161] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.539765] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.547428] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.555108] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.562348] usb usb2: Product: xHCI Host Controller [ 6.567569] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.573599] usb usb2: SerialNumber: 3610000.xhci [ 6.579157] hub 2-0:1.0: USB hub found [ 6.582281] hub 2-0:1.0: 4 ports detected [ 6.625180] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.631448] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.633089] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.633271] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.646301] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.647439] tegra194-cpufreq ccplex: probed with BWMGR [ 6.648754] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.649188] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.649729] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.651003] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.658508] tegra194-vi5 15c10000.vi: initialized [ 6.659585] mmc0: CQHCI version 5.10 [ 6.659855] tegradc 15210000.display: disp0 connected to head1->sor [ 6.661112] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.665803] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.672344] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.679468] tegradc 15210000.display: DT parsed successfully [ 6.687127] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.688261] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.693034] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.697599] random: crng init done [ 6.699270] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.707155] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.714798] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.714806] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.721598] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.725330] generic_infoframe_type: 0x87 [ 6.731460] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.731467] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.768773] tegradc 15200000.display: DT parsed successfully [ 6.769175] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.774468] tegradc 15200000.display: Display dc.0000000058e34dec registered with id=0 [ 6.785608] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.790757] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.796808] nvethernet 2490000.ethernet: Macsec not supported [ 6.798145] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.805027] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.805031] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.805368] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.811843] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.818679] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.818903] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.826991] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.831733] mmc0: Command Queue Engine enabled [ 6.831738] mmc0: periodic cache flush enabled [ 6.831754] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.832274] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.832441] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.836156] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.841358] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.847521] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.854522] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.863855] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.872608] tegra-se-nvhost 15810000.se: initialized [ 6.899789] tegradc 15200000.display: probed [ 6.911745] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.950776] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.957237] tegra-se-nvhost 15820000.se: initialized [ 6.961900] Console: switching to colour frame buffer device 240x67 [ 6.963346] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.967437] tegradc 15200000.display: fb registered [ 6.967502] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.973956] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.977286] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.977291] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.977295] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.977299] usb 1-2: Manufacturer: Generic [ 6.979197] hub 1-2:1.0: USB hub found [ 6.979319] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.979544] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.985080] tegra-se-nvhost 15830000.se: initialized [ 6.992062] hub 1-2:1.0: 4 ports detected [ 6.999974] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.045235] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.046461] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.055948] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.061755] tegra-se-nvhost 15840000.se: initialized [ 7.068609] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.074920] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.081510] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.088676] tegra_actmon d230000.actmon: in actmon_register()... [ 7.094460] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.094563] Extcon AUX1(HDMI) enable [ 7.094693] tegradc 15210000.display: disp1 connected to head1->sor [ 7.100775] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.107894] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.111858] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.117687] tegradc 15210000.display: DT parsed successfully [ 7.123685] hvc_sysfs: hypervisor is not present [ 7.130487] tegradc 15210000.display: Display dc.00000000048707b6 registered with id=1 [ 7.135011] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.135017] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.135021] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.135025] usb 2-3: Manufacturer: Generic [ 7.145764] hub 2-3:1.0: USB hub found [ 7.166008] ALSA device list: [ 7.166136] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.166144] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.173836] tegradc 15210000.display: probed [ 7.174281] hub 2-3:1.0: 4 ports detected [ 7.177266] No soundcards found. [ 7.212980] tegradc 15210000.display: fb registered [ 7.221258] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.225034] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.226954] Freeing unused kernel memory: 3968K [ 7.232484] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.242668] tegradc 15200000.display: blank - powerdown [ 7.249748] Run /init as init process [ 7.253598] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.265569] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.278947] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.278951] Extcon AUX1(HDMI) disable [ 7.302389] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.303238] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.314737] tegradc 15200000.display: unblank [ 7.315804] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.315993] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.321756] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.323708] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.327684] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.327687] Extcon AUX1(HDMI) enable [ 7.330110] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.330114] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.340461] tegradc 15200000.display: sync windows ret = 247 [ 7.371606] tegradc 15210000.display: blank - powerdown [ 7.373123] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.373127] Extcon DP: HPD disabled [ 7.373131] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.373143] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.373148] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.394459] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.401281] Extcon HDMI: HPD enabled [ 7.405118] tegradc 15200000.display: hdmi: plugged [ 7.414732] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.418347] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.425265] usb 1-3: Product: Bluetooth Radio [ 7.429719] usb 1-3: Manufacturer: Realtek [ 7.433920] usb 1-3: SerialNumber: 00e04c000001 [ 7.447539] Root device found: mmcblk0p1 [ 7.451076] Found dev node: /dev/mmcblk0p1 [ 7.487391] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.492789] Rootfs mounted over mmcblk0p1 [ 7.529159] Switching from initrd to actual rootfs [ 7.687143] systemd[1]: System time before build time, advancing clock. [ 7.758304] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.763300] systemd[1]: Detected architecture arm64. [ 7.816669] systemd[1]: Set hostname to . [ 7.976652] systemd-sysv-generator[241]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.337315] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.339074] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.344508] systemd[1]: Created slice system-modprobe.slice. [ 8.349069] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.353077] systemd[1]: Created slice User and Session Slice. [ 8.356555] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.360604] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.364058] systemd[1]: Reached target User and Group Name Lookups. [ 8.367279] systemd[1]: Reached target Slices. [ 8.370361] systemd[1]: Reached target Swap. [ 8.374388] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.378075] systemd[1]: Listening on Syslog Socket. [ 8.381698] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.385046] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.389350] systemd[1]: Listening on Journal Audit Socket. [ 8.392954] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.396789] systemd[1]: Listening on Journal Socket. [ 8.401985] systemd[1]: Listening on udev Control Socket. [ 8.405944] systemd[1]: Listening on udev Kernel Socket. [ 8.414907] systemd[1]: Mounting Huge Pages File System... [ 8.423256] systemd[1]: Mounting POSIX Message Queue File System... [ 8.430988] systemd[1]: Mounting RPC Pipe File System... [ 8.439490] systemd[1]: Mounting Kernel Debug File System... [ 8.447918] systemd[1]: Mounting Kernel Trace File System... [ 8.457513] systemd[1]: Starting Journal Service... [ 8.466300] systemd[1]: Starting Set the console keyboard layout... [ 8.474529] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.478173] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.484389] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.492534] systemd[1]: Started Nameserver information manager. [ 8.497455] systemd[1]: Reached target Network (Pre). [ 8.504853] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.506712] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.512716] systemd[1]: Starting Load Kernel Modules... [ 8.520209] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.528697] systemd[1]: Starting udev Coldplug all Devices... [ 8.538744] systemd[1]: Mounted Huge Pages File System. [ 8.542492] systemd[1]: Mounted POSIX Message Queue File System. [ 8.546169] systemd[1]: Mounted RPC Pipe File System. [ 8.549952] systemd[1]: Mounted Kernel Debug File System. [ 8.551203] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.552575] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.554984] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.554989] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.554998] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.555001] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.555673] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.555779] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.555829] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.555844] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.577195] systemd[1]: Mounted Kernel Trace File System. [ 8.584008] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.591122] systemd[1]: nvfb-udev.service: Succeeded. [ 8.596496] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.607646] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.620296] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.622136] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.629874] systemd[1]: Starting Load/Save Random Seed... [ 8.637467] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.637467] [ 8.638274] systemd[1]: Starting Create System Users... [ 8.672541] systemd[1]: Finished Load Kernel Modules. [ 8.676909] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.683400] systemd[1]: Mounting Kernel Configuration File System... [ 8.692200] systemd[1]: Started OP-TEE Client Supplicant. [ 8.700593] systemd[1]: Starting Apply Kernel Variables... [ 8.710628] systemd[1]: Finished Load/Save Random Seed. [ 8.714763] systemd[1]: Mounted Kernel Configuration File System. [ 8.726457] systemd[1]: Finished Create System Users. [ 8.734579] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.155916] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.162824] imx219 9-0010: board setup failed [ 10.164293] imx219: probe of 9-0010 failed with error -121 [ 10.179740] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.190520] imx219 10-0010: board setup failed [ 10.190616] imx219: probe of 10-0010 failed with error -121 [ 10.315160] hot-surface-alert cooling state: 0 -> 1 [ 10.675059] using random self ethernet address [ 10.676360] using random host ethernet address [ 11.800783] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.802223] Creating 1 MTD partitions on "spi6.0": [ 11.803404] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.255070] using random self ethernet address [ 12.256190] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.829237] nvidia: loading out-of-tree module taints kernel. [ 58.451296] watchdog: watchdog0: watchdog did not stop! [ 58.910330] Trying to unregister non-registered hwtime source [ 61.968946] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.970565] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [Eÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11ÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä0ÿâpm_post initialized dbells initialized ÿä3:2ÿâdmce initialized cvc initialized ÿä3:20 UTC 2022ÿâavfs_clk_mach_post initialized ÿä aarÿâavfs_clk_platform_post initialized ÿäch6ÿâcvc_late initialized regulator_post initialized ÿä4 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING:ÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.420] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.686] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.746] calling apps_init() [0003.747] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000787] Console: colour dummy device 80x25 [ 0.002185] printk: console [tty0] enabled [ 0.002262] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002328] pid_max: default: 32768 minimum: 301 [ 0.002502] LSM: Security Framework initializing [ 0.002559] Yama: becoming mindful. [ 0.002618] SELinux: Initializing. [ 0.002797] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002836] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006261] rcu: Hierarchical SRCU implementation. [ 0.006501] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007343] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007375] DTB Build time: Aug 10 2022 20:31:49 [ 0.010305] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010603] Remapping and enabling EFI services. [ 0.012767] smp: Bringing up secondary CPUs ... [ 0.041959] Detected PIPT I-cache on CPU1 [ 0.042071] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073212] Detected PIPT I-cache on CPU2 [ 0.073359] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102914] Detected PIPT I-cache on CPU3 [ 0.103090] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132854] Detected PIPT I-cache on CPU4 [ 0.133011] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162774] Detected PIPT I-cache on CPU5 [ 0.162879] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163264] smp: Brought up 1 node, 6 CPUs [ 0.163466] SMP: Total of 6 processors activated. [ 0.163525] CPU features: detected: Privileged Access Never [ 0.163546] CPU features: detected: LSE atomic instructions [ 0.163558] CPU features: detected: User Access Override [ 0.163570] CPU features: detected: 32-bit EL0 Support [ 0.163582] CPU features: detected: RAS Extension Support [ 0.163593] CPU features: detected: CRC32 instructions [ 0.163605] CPU features: detected: 32-bit EL1 Support [ 0.233705] CPU: All CPU(s) started at EL2 [ 0.239323] devtmpfs: initialized [ 0.287846] Registered cp15_barrier emulation handler [ 0.287967] Registered setend emulation handler [ 0.288010] KASLR enabled [ 0.288262] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288287] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289586] pinctrl core: initialized pinctrl subsystem [ 0.290561] SMBIOS 3.0.0 present. [ 0.290591] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291174] NET: Registered protocol family 16 [ 0.293079] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293572] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294311] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294368] audit: initializing netlink subsys (disabled) [ 0.294657] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.295099] thermal_sys: Registered thermal governor 'step_wise' [ 0.295108] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295132] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298573] cpuidle: using governor menu [ 0.298937] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299346] ASID allocator initialised with 32768 entries [ 0.299628] Serial: AMBA PL011 UART driver [ 0.303212] Tegra reboot handler registered. [ 0.381452] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.381582] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.381796] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.381847] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.381972] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.382019] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.382150] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.382197] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.382320] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.382395] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.384460] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.384493] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.384536] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.384564] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.384594] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.384620] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.384647] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.384673] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.384699] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.384725] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.384751] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.384778] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.384811] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.384839] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.384894] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.384924] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.384968] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.385100] mc-err: mcerr ops are set to t19x [ 0.396812] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.396834] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.396847] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.396859] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.405055] ACPI: Interpreter disabled. [ 0.406794] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.408603] iommu: Default domain type: Translated [ 0.408682] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.409282] SCSI subsystem initialized [ 0.409487] usbcore: registered new interface driver usbfs [ 0.409568] usbcore: registered new interface driver hub [ 0.409630] usbcore: registered new device driver usb [ 0.410274] mc: Linux media interface: v0.10 [ 0.410332] videodev: Linux video capture interface: v2.00 [ 0.410725] pps_core: LinuxPPS API ver. 1 registered [ 0.410742] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.410798] PTP clock support registered [ 0.411116] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.411584] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.411706] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.412551] Registered efivars operations [ 0.420803] FPGA manager framework [ 0.420968] Advanced Linux Sound Architecture Driver Initialized. [ 0.421798] Bluetooth: Core ver 2.22 [ 0.421849] NET: Registered protocol family 31 [ 0.421865] Bluetooth: HCI device and connection manager initialized [ 0.421888] Bluetooth: HCI socket layer initialized [ 0.421905] Bluetooth: L2CAP socket layer initialized [ 0.421934] Bluetooth: SCO socket layer initialized [ 0.423764] camchar: rtcpu character device driver loaded [ 0.424599] clocksource: Switched to clocksource arch_sys_counter [ 0.837094] VFS: Disk quotas dquot_6.6.0 [ 0.837187] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.837626] pnp: PnP ACPI: disabled [ 0.852461] la/ptsa driver initialized. [ 0.852722] NET: Registered protocol family 2 [ 0.852932] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.860898] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.861089] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.861480] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.862103] TCP: Hash tables configured (established 65536 bind 65536) [ 0.862269] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.862417] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.862714] NET: Registered protocol family 1 [ 0.863479] RPC: Registered named UNIX socket transport module. [ 0.863499] RPC: Registered udp transport module. [ 0.863513] RPC: Registered tcp transport module. [ 0.863526] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.863551] PCI: CLS 0 bytes, default 64 [ 0.863845] Trying to unpack rootfs image as initramfs... [ 1.122876] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.125955] Freeing initrd memory: 8196K [ 1.130128] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.130160] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.130194] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.130566] kvm [1]: IPA Size Limit: 40 bits [ 1.131088] kvm [1]: vgic interrupt IRQ9 [ 1.131620] kvm [1]: VHE mode initialized successfully [ 1.133024] Initialise system trusted keyrings [ 1.133344] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.138974] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.139789] NFS: Registering the id_resolver key type [ 1.139827] Key type id_resolver registered [ 1.139842] Key type id_legacy registered [ 1.139929] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.139952] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.139988] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.149971] NET: Registered protocol family 38 [ 1.149995] Key type asymmetric registered [ 1.150040] Asymmetric key parser 'x509' registered [ 1.150084] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.150303] io scheduler mq-deadline registered [ 1.150319] io scheduler kyber registered [ 1.156326] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.159440] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.159523] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.159593] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.159668] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.159735] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.166200] scrncapt: init (heads:4 wins:6 planes:4) [ 1.166436] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.167412] EINJ: ACPI disabled. [ 1.170649] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.170675] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.170690] tegra-pmc: ### PMC reset level: L1 [ 1.170703] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.170747] tegra-pmc: PMC Prod config success [ 1.176080] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.181491] random: fast init done [ 1.181764] printk: console [ttyTCU0] enabled [ 2.733224] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.738199] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.742786] arm-smmu 10000000.iommu: stage 1 translation [ 2.748280] arm-smmu 10000000.iommu: stage 2 translation [ 2.753733] arm-smmu 10000000.iommu: nested translation [ 2.758822] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.766249] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.775300] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.779371] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.785688] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.793241] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.798703] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.803685] arm-smmu 12000000.iommu: stage 1 translation [ 2.808943] arm-smmu 12000000.iommu: stage 2 translation [ 2.814361] arm-smmu 12000000.iommu: nested translation [ 2.820045] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.826967] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.836077] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.840096] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.846905] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.853978] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.864122] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.867073] tegra_profiler: auth: init [ 2.871243] THERMAL EST: found 3 subdevs [ 2.874746] THERMAL EST num_resources: 0 [ 2.878844] [THERMAL EST subdev 0] [ 2.881910] [THERMAL EST subdev 1] [ 2.885580] [THERMAL EST subdev 2] [ 2.888551] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.894977] THERMAL EST: thz register success. [ 2.899522] THERMAL EST: end of probe, return err: 0 [ 2.904751] nvsciipc: loaded module [ 2.910891] tun: Universal TUN/TAP device driver, 1.6 [ 2.913982] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.920351] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.926176] e1000e: Intel(R) PRO/1000 Network Driver [ 2.930823] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.937154] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.942455] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.948676] PPP generic driver version 2.4.2 [ 2.952649] PPP BSD Compression module registered [ 2.957172] PPP Deflate Compression module registered [ 2.962676] PPP MPPE Compression module registered [ 2.967691] usbcore: registered new interface driver r8152 [ 2.973195] usbcore: registered new interface driver asix [ 2.978279] usbcore: registered new interface driver ax88179_178a [ 2.984652] usbcore: registered new interface driver cdc_ether [ 2.990610] usbcore: registered new interface driver net1080 [ 2.995943] usbcore: registered new interface driver cdc_subset [ 3.002251] usbcore: registered new interface driver zaurus [ 3.007937] usbcore: registered new interface driver cdc_ncm [ 3.013621] usbcore: registered new interface driver aqc111 [ 3.019246] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.025084] ohci-pci: OHCI PCI platform driver [ 3.029633] ohci-platform: OHCI generic platform driver [ 3.035352] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.041645] usbcore: registered new interface driver uas [ 3.045918] usbcore: registered new interface driver usb-storage [ 3.051998] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.057896] mousedev: PS/2 mouse device common for all mice [ 3.063082] usbcore: registered new interface driver xpad [ 3.070830] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.073586] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.081615] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.087770] i2c /dev entries driver [ 3.091474] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.096960] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.102383] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.107733] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.113373] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.118913] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.124279] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.137828] device-mapper: uevent: version 1.0.3 [ 3.138258] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.144399] cpuidle: Initializing cpuidle driver [ 3.148382] sdhci: Secure Digital Host Controller Interface driver [ 3.153185] sdhci: Copyright(c) Pierre Ossman [ 3.157540] Synopsys Designware Multimedia Card Interface Driver [ 3.163487] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.169436] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.170264] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.182992] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.205451] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.215290] vdd-1v0: supplied by regulator-dummy [ 3.220781] vdd-1v8-hs: supplied by regulator-dummy [ 3.225672] vdd-1v8-ls: supplied by regulator-dummy [ 3.230691] vdd-1v8-ao: supplied by regulator-dummy [ 3.234662] vddio-ddr-1v1: supplied by regulator-dummy [ 3.239114] vdd-rtc: supplied by regulator-dummy [ 3.240937] spmic-ldo1: supplied by regulator-dummy [ 3.242137] vdd-ao-3v3: supplied by regulator-dummy [ 3.248363] vddio-emmc-3v3: supplied by regulator-dummy [ 3.254657] spmic-ldo4: supplied by regulator-dummy [ 3.255898] vdd-usb-3v3: supplied by regulator-dummy [ 3.262178] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.268341] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.273876] spmic-ldo8: supplied by vdd-1v8-ls [ 3.275369] gpio-510 (gpio_default): hogged as output/high [ 3.276761] gpio-511 (gpio_default): hogged as output/high [ 3.279772] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.415720] max77686-rtc max77620-rtc: registered as rtc0 [ 3.417174] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.417513] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.236869] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.238088] hid: raw HID events driver (C) Jiri Kosina [ 4.238933] usbcore: registered new interface driver usbhid [ 4.239079] usbhid: USB HID core driver [ 4.241160] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.242575] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.971999] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.046227] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.037 ms) ÿá[ 4.326782] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.327233] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.328159] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.329100] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.330610] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.331352] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.331950] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.333428] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.333678] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.335895] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.343558] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.349938] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.354666] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.360956] denver_knobs_init:MTS_VERSION:55637613 [ 4.372758] t19x_cache tegra-cache: probed [ 4.375844] optee: probing for conduit method. [ 4.376766] optee: revision 3.16 (65cc2218) [ 4.377722] optee: dynamic shared memory is enabled [ 4.381992] optee: initialized driver [ 4.387925] nvpmodel: initialized successfully [ 4.389560] tegra_hv: get_hvd: not initialized yet [ 4.394125] user_ivc_mempool: hypervisor not present [ 4.399851] usbcore: registered new interface driver snd-usb-audio [ 4.406258] u32 classifier [ 4.407639] input device check on [ 4.411463] Actions configured [ 4.415284] Initializing XFRM netlink socket [ 4.420196] NET: Registered protocol family 10 [ 4.426309] Segment Routing with IPv6 [ 4.427479] NET: Registered protocol family 17 [ 4.431518] NET: Registered protocol family 15 [ 4.436561] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.449980] Bluetooth: RFCOMM socket layer initialized [ 4.454173] Bluetooth: RFCOMM ver 1.11 [ 4.458371] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.463944] Bluetooth: HIDP socket layer initialized [ 4.470013] 9pnet: Installing 9P2000 support [ 4.473646] Key type dns_resolver registered [ 4.478760] registered taskstats version 1 [ 4.481864] Loading compiled-in X.509 certificates [ 4.494076] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.497636] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.508002] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.509786] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.518573] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.526739] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.644746] tegra194-pcie 14160000.pcie: Link up [ 4.647688] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.647891] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.648127] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.648491] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.648756] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.649145] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.649586] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.663204] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.663800] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.664232] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.665979] pci 0004:01:00.0: supports D1 D2 [ 4.666184] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.680343] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.680950] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.681276] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.681725] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.682031] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.682248] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.682491] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.686773] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.695472] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.705489] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.710120] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.715784] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.722608] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.731680] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.733453] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.741600] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.750334] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.865548] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.866270] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.866488] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.866642] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.866912] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.867134] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.867517] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.867906] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.885097] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.885482] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.887209] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.888586] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.889877] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.891023] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.891901] pci 0005:00:00.0: Removing from iommu group 7 [ 5.892165] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.921425] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.941931] host1x 13e10000.host1x: initialized [ 5.943386] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.944292] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.945388] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.946044] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.947002] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.947606] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.948795] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.949421] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.958822] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.965526] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.975737] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.982527] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.992356] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.999669] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.009609] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.016310] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.026467] falcon 15340000.vic: Adding to iommu group 17 [ 6.040446] falcon 15340000.vic: initialized [ 6.041290] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.046538] falcon 15380000.nvjpg: initialized [ 6.047053] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.059084] falcon 154c0000.nvenc: initialized [ 6.059607] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.069756] falcon 15a80000.nvenc1: initialized [ 6.070323] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.081757] nvdec 15480000.nvdec: initialized [ 6.082475] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.091450] nvdec 15140000.nvdec1: initialized [ 6.091982] tsec 15500000.tsec: Adding to iommu group 18 [ 6.097973] tsec 15500000.tsec: initialized [ 6.098446] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.106691] tsec 15100000.tsecb: initialized [ 6.110537] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.135694] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.146980] gpio-374 (wifi-enable): hogged as output/high [ 6.147353] gpio-431 (camera-control-output-low): hogged as output/low [ 6.147633] gpio-432 (camera-control-output-low): hogged as output/low [ 6.149200] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.150812] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.151306] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.157809] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.163401] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.169157] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.174206] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.182331] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.190011] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.201181] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.206643] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.212821] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.221446] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.230629] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.237837] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.245835] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.252010] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.261460] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.267877] pva 16000000.pva0: Adding to iommu group 22 [ 6.293444] pva 16000000.pva0: initialized [ 6.297938] pva 16800000.pva1: Adding to iommu group 23 [ 6.308534] pva 16800000.pva1: initialized [ 6.312765] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.325968] nvdla 15880000.nvdla0: initialized [ 6.327286] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.336395] nvdla 158c0000.nvdla1: initialized [ 6.340529] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.340890] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.340925] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.341115] tegradc 15200000.display: Adding to iommu group 26 [ 6.341284] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.341391] tegradccommon 15200000.display-hub: dma mapping done [ 6.343747] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.349838] tegradc 15210000.display: Adding to iommu group 26 [ 6.352187] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.353624] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.353770] generic_infoframe_type: 0x87 [ 6.353868] tegradc 15200000.display: DT parsed successfully [ 6.353956] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.357723] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.363400] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.369689] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.369696] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.370775] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.373431] tegra_cec 3960000.tegra_cec: probed [ 6.378993] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.380402] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.388327] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.398793] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.403729] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.410554] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.418116] kfuse 3830000.kfuse: initialized [ 6.426013] tegradc 15210000.display: disp0 connected to head1->sor [ 6.429403] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.435069] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.445354] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.446118] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.451374] tegradc 15210000.display: DT parsed successfully [ 6.458708] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.464396] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.532529] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.537651] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.537798] random: crng init done [ 6.547042] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.555500] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.575771] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.576150] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.578983] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.587045] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.595607] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.602452] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.609850] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.617063] usb usb1: Product: xHCI Host Controller [ 6.622228] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.628514] usb usb1: SerialNumber: 3610000.xhci [ 6.634255] hub 1-0:1.0: USB hub found [ 6.636939] hub 1-0:1.0: 4 ports detected [ 6.641517] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.646235] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.654130] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.661485] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.669444] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.676668] usb usb2: Product: xHCI Host Controller [ 6.681883] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.688096] usb usb2: SerialNumber: 3610000.xhci [ 6.693573] hub 2-0:1.0: USB hub found [ 6.696536] hub 2-0:1.0: 4 ports detected [ 6.738356] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.743752] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.745129] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.745321] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.758298] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.759368] tegra194-cpufreq ccplex: probed with BWMGR [ 6.760752] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.761300] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.761727] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.762941] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.770667] mmc0: CQHCI version 5.10 [ 6.772835] tegra194-vi5 15c10000.vi: initialized [ 6.775159] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.776683] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.780454] generic_infoframe_type: 0x87 [ 6.786937] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.790374] tegradc 15200000.display: DT parsed successfully [ 6.798520] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.804280] tegradc 15200000.display: Display dc.00000000a4890a81 registered with id=0 [ 6.810802] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.820035] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.825324] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.825332] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.833264] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.833549] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.852687] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.854343] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.862752] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.870148] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.876757] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.878064] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.883576] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.883828] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.898065] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.900629] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.904147] nvethernet 2490000.ethernet: Macsec not supported [ 6.905533] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.910698] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.913012] tegradc 15200000.display: probed [ 6.920711] mmc0: Command Queue Engine enabled [ 6.920715] mmc0: periodic cache flush enabled [ 6.920729] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.921169] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.922602] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.929060] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.935816] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.954153] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.957414] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.016635] Console: switching to colour frame buffer device 240x67 [ 7.017702] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.022796] tegradc 15200000.display: fb registered [ 7.022886] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.030496] tegra-se-nvhost 15810000.se: initialized [ 7.034533] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.044353] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.044639] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.050516] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.069390] tegra-se-nvhost 15820000.se: initialized [ 7.072529] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.075593] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.082201] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.082206] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.082218] usb 1-2: Manufacturer: Generic [ 7.089056] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.097551] hub 1-2:1.0: USB hub found [ 7.101058] tegra-se-nvhost 15830000.se: initialized [ 7.105387] hub 1-2:1.0: 4 ports detected [ 7.111712] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.120001] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.124114] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.145803] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.146285] tegra-se-nvhost 15840000.se: initialized [ 7.152732] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.165412] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.166841] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.172157] Extcon AUX1(HDMI) enable [ 7.172294] tegradc 15210000.display: disp1 connected to head1->sor [ 7.180166] tegra_actmon d230000.actmon: in actmon_register()... [ 7.182237] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.188264] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.194075] tegradc 15210000.display: DT parsed successfully [ 7.201813] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.206580] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.206629] tegradc 15210000.display: Display dc.0000000030275e40 registered with id=1 [ 7.213037] hvc_sysfs: hypervisor is not present [ 7.220648] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.246677] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.253676] ALSA device list: [ 7.255965] No soundcards found. [ 7.260538] tegradc 15210000.display: probed [ 7.264061] tegradc 15210000.display: fb registered [ 7.264402] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.272447] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.277238] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.277243] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.277247] usb 2-3: Manufacturer: Generic [ 7.279064] Freeing unused kernel memory: 3968K [ 7.284790] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.288353] hub 2-3:1.0: USB hub found [ 7.290159] hub 2-3:1.0: 4 ports detected [ 7.321265] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.326265] tegradc 15210000.display: blank - powerdown [ 7.328820] Run /init as init process [ 7.331613] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.345437] Extcon DP: HPD disabled [ 7.347878] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.353773] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.359571] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.382775] tegradc 15200000.display: blank - powerdown [ 7.388657] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.392670] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.394994] Root device found: mmcblk0p1 [ 7.397068] Found dev node: /dev/mmcblk0p1 [ 7.420477] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.420481] Extcon AUX1(HDMI) disable [ 7.431678] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.435748] Rootfs mounted over mmcblk0p1 [ 7.444144] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.445063] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.457229] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.457236] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.457836] tegradc 15200000.display: unblank [ 7.458903] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.459094] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.466728] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.468752] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.472753] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.472757] Extcon AUX1(HDMI) enable [ 7.475466] Switching from initrd to actual rootfs [ 7.485560] tegradc 15200000.display: sync windows ret = 247 [ 7.524188] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.531255] Extcon HDMI: HPD enabled [ 7.534672] tegradc 15200000.display: hdmi: plugged [ 7.537863] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.548258] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.555617] usb 1-3: Product: Bluetooth Radio [ 7.560056] usb 1-3: Manufacturer: Realtek [ 7.563908] usb 1-3: SerialNumber: 00e04c000001 [ 7.638565] systemd[1]: System time before build time, advancing clock. [ 7.712439] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.717618] systemd[1]: Detected architecture arm64. [ 7.757413] systemd[1]: Set hostname to . [ 7.906600] systemd-sysv-generator[245]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.262383] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.264178] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.269845] systemd[1]: Created slice system-modprobe.slice. [ 8.274760] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.279139] systemd[1]: Created slice User and Session Slice. [ 8.282746] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.287015] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.290547] systemd[1]: Reached target User and Group Name Lookups. [ 8.293961] systemd[1]: Reached target Slices. [ 8.297242] systemd[1]: Reached target Swap. [ 8.301551] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.305363] systemd[1]: Listening on Syslog Socket. [ 8.309128] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.312712] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.317100] systemd[1]: Listening on Journal Audit Socket. [ 8.320920] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.324728] systemd[1]: Listening on Journal Socket. [ 8.328457] systemd[1]: Listening on udev Control Socket. [ 8.332020] systemd[1]: Listening on udev Kernel Socket. [ 8.340027] systemd[1]: Mounting Huge Pages File System... [ 8.348255] systemd[1]: Mounting POSIX Message Queue File System... [ 8.356407] systemd[1]: Mounting RPC Pipe File System... [ 8.364919] systemd[1]: Mounting Kernel Debug File System... [ 8.373512] systemd[1]: Mounting Kernel Trace File System... [ 8.384999] systemd[1]: Starting Journal Service... [ 8.395273] systemd[1]: Starting Set the console keyboard layout... [ 8.403391] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.407097] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.413460] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.421499] systemd[1]: Started Nameserver information manager. [ 8.425844] systemd[1]: Reached target Network (Pre). [ 8.432681] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.434893] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.444906] systemd[1]: Starting Load Kernel Modules... [ 8.452743] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.460690] systemd[1]: Starting udev Coldplug all Devices... [ 8.471992] systemd[1]: Mounted Huge Pages File System. [ 8.475859] systemd[1]: Mounted POSIX Message Queue File System. [ 8.479767] systemd[1]: Mounted RPC Pipe File System. [ 8.480988] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.485810] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.487356] systemd[1]: Mounted Kernel Debug File System. [ 8.489226] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.490780] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.492276] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.493791] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.497549] systemd[1]: Mounted Kernel Trace File System. [ 8.503576] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.505219] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.505469] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.508423] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.508436] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.517290] systemd[1]: nvfb-udev.service: Succeeded. [ 8.521354] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.533772] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.538764] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.540519] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.555105] systemd[1]: Starting Load/Save Random Seed... [ 8.563396] systemd[1]: Starting Create System Users... [ 8.609272] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.609272] [ 8.610777] systemd[1]: Finished Create System Users. [ 8.622026] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.629261] systemd[1]: Finished Load/Save Random Seed. [ 8.639303] systemd[1]: Finished Load Kernel Modules. [ 8.644031] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.650946] systemd[1]: Mounting Kernel Configuration File System... [ 8.659364] systemd[1]: Started OP-TEE Client Supplicant. [ 8.669415] systemd[1]: Starting Apply Kernel Variables... [ 8.680306] systemd[1]: Finished Set the console keyboard layout. [ 8.687794] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.691897] systemd[1]: Mounted Kernel Configuration File System. [ 8.696040] systemd[1]: Reached target Local File Systems (Pre). [ 10.111209] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.117638] imx219 9-0010: board setup failed [ 10.128310] imx219: probe of 9-0010 failed with error -121 [ 10.145707] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.152294] imx219 10-0010: board setup failed [ 10.152415] imx219: probe of 10-0010 failed with error -121 [ 10.221379] hot-surface-alert cooling state: 0 -> 1 [ 10.800093] using random self ethernet address [ 10.830657] using random host ethernet address [ 11.738682] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.738689] Creating 1 MTD partitions on "spi6.0": [ 11.738697] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.310960] using random self ethernet address [ 12.312133] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.778271] nvidia: loading out-of-tree module taints kernel. [ 58.810357] watchdog: watchdog0: watchdog did not stop! [ 59.346388] Trying to unregister non-registered hwtime source [ 62.404057] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.405808] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeouüÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11ÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä03:ÿâdmce initialized ÿä2ÿâcvc initialized ÿä3:20 UTC 202ÿâavfs_clk_mach_post initialized ÿä2 aaÿâavfs_clk_platform_post initialized ÿärchÿâcvc_late initialized regulator_post initialized ÿä64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.607] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.648] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.650] I> width = 720, height = 480, frequency = 26973026 [0003.654] I> width = 720, height = 576, frequency = 26973026 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.748] initializing target [0003.748] calling apps_init() [0003.749] starting app kernel_boot_app [0003.750] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000027] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000717] Console: colour dummy device 80x25 [ 0.002348] printk: console [tty0] enabled [ 0.002412] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002456] pid_max: default: 32768 minimum: 301 [ 0.002676] LSM: Security Framework initializing [ 0.002754] Yama: becoming mindful. [ 0.002816] SELinux: Initializing. [ 0.002970] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003009] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006047] rcu: Hierarchical SRCU implementation. [ 0.006308] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007141] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007178] DTB Build time: Aug 10 2022 20:31:49 [ 0.010000] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010243] Remapping and enabling EFI services. [ 0.012196] smp: Bringing up secondary CPUs ... [ 0.041533] Detected PIPT I-cache on CPU1 [ 0.041612] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071497] Detected PIPT I-cache on CPU2 [ 0.071576] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101234] Detected PIPT I-cache on CPU3 [ 0.101305] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130965] Detected PIPT I-cache on CPU4 [ 0.131065] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160688] Detected PIPT I-cache on CPU5 [ 0.160758] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161095] smp: Brought up 1 node, 6 CPUs [ 0.161304] SMP: Total of 6 processors activated. [ 0.161364] CPU features: detected: Privileged Access Never [ 0.161387] CPU features: detected: LSE atomic instructions [ 0.161400] CPU features: detected: User Access Override [ 0.161414] CPU features: detected: 32-bit EL0 Support [ 0.161447] CPU features: detected: RAS Extension Support [ 0.161460] CPU features: detected: CRC32 instructions [ 0.161474] CPU features: detected: 32-bit EL1 Support [ 0.235230] CPU: All CPU(s) started at EL2 [ 0.241106] devtmpfs: initialized [ 0.291558] Registered cp15_barrier emulation handler [ 0.291668] Registered setend emulation handler [ 0.291689] KASLR enabled [ 0.291933] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291960] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293037] pinctrl core: initialized pinctrl subsystem [ 0.294075] SMBIOS 3.0.0 present. [ 0.294105] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294786] NET: Registered protocol family 16 [ 0.296496] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296995] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297616] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297681] audit: initializing netlink subsys (disabled) [ 0.298000] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.298356] thermal_sys: Registered thermal governor 'step_wise' [ 0.298362] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298377] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300325] cpuidle: using governor menu [ 0.300587] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.301036] ASID allocator initialised with 32768 entries [ 0.301289] Serial: AMBA PL011 UART driver [ 0.304527] Tegra reboot handler registered. [ 0.368852] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.369006] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.369204] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.369250] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.369368] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.369410] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.369520] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.369559] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.369699] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.369737] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.372166] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.372204] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.372231] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.372257] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.372285] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.372345] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.372413] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.372489] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.372551] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.372587] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.372627] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.372652] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.372675] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.372697] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.372719] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.372741] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.372763] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.372854] mc-err: mcerr ops are set to t19x [ 0.384298] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.384322] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.384334] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.384346] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.392188] ACPI: Interpreter disabled. [ 0.393286] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.394338] iommu: Default domain type: Translated [ 0.394418] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.394791] SCSI subsystem initialized [ 0.394920] usbcore: registered new interface driver usbfs [ 0.394959] usbcore: registered new interface driver hub [ 0.395003] usbcore: registered new device driver usb [ 0.395455] mc: Linux media interface: v0.10 [ 0.395485] videodev: Linux video capture interface: v2.00 [ 0.395787] pps_core: LinuxPPS API ver. 1 registered [ 0.395799] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.395818] PTP clock support registered [ 0.396014] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.396372] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.396440] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.397004] Registered efivars operations [ 0.401846] FPGA manager framework [ 0.401945] Advanced Linux Sound Architecture Driver Initialized. [ 0.402517] Bluetooth: Core ver 2.22 [ 0.402557] NET: Registered protocol family 31 [ 0.402569] Bluetooth: HCI device and connection manager initialized [ 0.402584] Bluetooth: HCI socket layer initialized [ 0.402597] Bluetooth: L2CAP socket layer initialized [ 0.402618] Bluetooth: SCO socket layer initialized [ 0.404556] camchar: rtcpu character device driver loaded [ 0.405526] clocksource: Switched to clocksource arch_sys_counter [ 0.812057] VFS: Disk quotas dquot_6.6.0 [ 0.812187] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.812621] pnp: PnP ACPI: disabled [ 0.825689] la/ptsa driver initialized. [ 0.825896] NET: Registered protocol family 2 [ 0.826151] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.835154] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.835318] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.835709] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.836353] TCP: Hash tables configured (established 65536 bind 65536) [ 0.836583] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.836729] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.837090] NET: Registered protocol family 1 [ 0.837998] RPC: Registered named UNIX socket transport module. [ 0.838059] RPC: Registered udp transport module. [ 0.838084] RPC: Registered tcp transport module. [ 0.838106] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.838167] PCI: CLS 0 bytes, default 64 [ 0.838425] Trying to unpack rootfs image as initramfs... [ 1.102501] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.105461] Freeing initrd memory: 8196K [ 1.109970] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.110004] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.110046] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.110393] kvm [1]: IPA Size Limit: 40 bits [ 1.110915] kvm [1]: vgic interrupt IRQ9 [ 1.111432] kvm [1]: VHE mode initialized successfully [ 1.112866] Initialise system trusted keyrings [ 1.113190] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.119116] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.120027] NFS: Registering the id_resolver key type [ 1.120062] Key type id_resolver registered [ 1.120076] Key type id_legacy registered [ 1.120167] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.120204] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.120244] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.130300] NET: Registered protocol family 38 [ 1.130353] Key type asymmetric registered [ 1.130369] Asymmetric key parser 'x509' registered [ 1.130425] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.130673] io scheduler mq-deadline registered [ 1.130691] io scheduler kyber registered [ 1.136299] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.139277] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.139354] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.139424] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.139493] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.139562] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.145226] scrncapt: init (heads:4 wins:6 planes:4) [ 1.145400] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.146501] EINJ: ACPI disabled. [ 1.149973] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.150006] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.150023] tegra-pmc: ### PMC reset level: L1 [ 1.150072] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.150127] tegra-pmc: PMC Prod config success [ 1.155265] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.160039] random: fast init done [ 1.160214] printk: console [ttyTCU0] enabled [ 2.712529] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.717149] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.722021] arm-smmu 10000000.iommu: stage 1 translation [ 2.727205] arm-smmu 10000000.iommu: stage 2 translation [ 2.732955] arm-smmu 10000000.iommu: nested translation [ 2.738297] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.745473] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.754211] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.758603] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.765152] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.772608] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.778193] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.782667] arm-smmu 12000000.iommu: stage 1 translation [ 2.788426] arm-smmu 12000000.iommu: stage 2 translation [ 2.793850] arm-smmu 12000000.iommu: nested translation [ 2.799024] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.806228] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.815457] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.819334] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.825883] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.833210] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.843255] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.846572] tegra_profiler: auth: init [ 2.850965] THERMAL EST: found 3 subdevs [ 2.854241] THERMAL EST num_resources: 0 [ 2.858077] [THERMAL EST subdev 0] [ 2.861130] [THERMAL EST subdev 1] [ 2.864811] [THERMAL EST subdev 2] [ 2.868057] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.874171] THERMAL EST: thz register success. [ 2.878749] THERMAL EST: end of probe, return err: 0 [ 2.883708] nvsciipc: loaded module [ 2.890655] tun: Universal TUN/TAP device driver, 1.6 [ 2.893559] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.899563] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.905128] e1000e: Intel(R) PRO/1000 Network Driver [ 2.910333] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.916383] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.921434] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.927647] PPP generic driver version 2.4.2 [ 2.932139] PPP BSD Compression module registered [ 2.936668] PPP Deflate Compression module registered [ 2.941914] PPP MPPE Compression module registered [ 2.946656] usbcore: registered new interface driver r8152 [ 2.952176] usbcore: registered new interface driver asix [ 2.957765] usbcore: registered new interface driver ax88179_178a [ 2.963886] usbcore: registered new interface driver cdc_ether [ 2.969610] usbcore: registered new interface driver net1080 [ 2.975433] usbcore: registered new interface driver cdc_subset [ 2.981237] usbcore: registered new interface driver zaurus [ 2.986941] usbcore: registered new interface driver cdc_ncm [ 2.992612] usbcore: registered new interface driver aqc111 [ 2.998348] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.004320] ohci-pci: OHCI PCI platform driver [ 3.008864] ohci-platform: OHCI generic platform driver [ 3.014765] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.020971] usbcore: registered new interface driver uas [ 3.025183] usbcore: registered new interface driver usb-storage [ 3.031274] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.037259] mousedev: PS/2 mouse device common for all mice [ 3.042334] usbcore: registered new interface driver xpad [ 3.050263] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.053039] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.060860] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.067285] i2c /dev entries driver [ 3.070710] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.076511] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.081919] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.087174] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.092293] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.098047] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.103169] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.117170] device-mapper: uevent: version 1.0.3 [ 3.117613] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.124040] cpuidle: Initializing cpuidle driver [ 3.127429] sdhci: Secure Digital Host Controller Interface driver [ 3.132671] sdhci: Copyright(c) Pierre Ossman [ 3.136769] Synopsys Designware Multimedia Card Interface Driver [ 3.142937] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.148966] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.149557] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.162149] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.180021] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.189290] vdd-1v0: supplied by regulator-dummy [ 3.194725] vdd-1v8-hs: supplied by regulator-dummy [ 3.199384] vdd-1v8-ls: supplied by regulator-dummy [ 3.204029] vdd-1v8-ao: supplied by regulator-dummy [ 3.207791] vddio-ddr-1v1: supplied by regulator-dummy [ 3.212046] vdd-rtc: supplied by regulator-dummy [ 3.213590] spmic-ldo1: supplied by regulator-dummy [ 3.214685] vdd-ao-3v3: supplied by regulator-dummy [ 3.220623] vddio-emmc-3v3: supplied by regulator-dummy [ 3.226705] spmic-ldo4: supplied by regulator-dummy [ 3.227768] vdd-usb-3v3: supplied by regulator-dummy [ 3.233722] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.239937] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.245296] spmic-ldo8: supplied by vdd-1v8-ls [ 3.246687] gpio-510 (gpio_default): hogged as output/high [ 3.248905] gpio-511 (gpio_default): hogged as output/high [ 3.255520] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.394093] max77686-rtc max77620-rtc: registered as rtc0 [ 3.395030] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.395332] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.100137] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.101126] hid: raw HID events driver (C) Jiri Kosina [ 4.101822] usbcore: registered new interface driver usbhid [ 4.101959] usbhid: USB HID core driver [ 4.103817] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.104987] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.154857] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.230136] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.088 ms) ÿá[ 4.190253] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.190807] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.191835] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.192438] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.194240] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.194907] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.195429] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.196589] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.196802] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.198448] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.200180] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.200250] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.206969] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.206979] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.233560] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.239921] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.245063] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.251903] denver_knobs_init:MTS_VERSION:55637613 [ 4.263174] t19x_cache tegra-cache: probed [ 4.266242] optee: probing for conduit method. [ 4.267142] optee: revision 3.16 (65cc2218) [ 4.268103] optee: dynamic shared memory is enabled [ 4.272147] optee: initialized driver [ 4.278761] nvpmodel: initialized successfully [ 4.279702] tegra_hv: get_hvd: not initialized yet [ 4.284319] user_ivc_mempool: hypervisor not present [ 4.290865] usbcore: registered new interface driver snd-usb-audio [ 4.297295] u32 classifier [ 4.298271] input device check on [ 4.302195] Actions configured [ 4.305914] Initializing XFRM netlink socket [ 4.310468] NET: Registered protocol family 10 [ 4.317029] Segment Routing with IPv6 [ 4.318200] NET: Registered protocol family 17 [ 4.322167] NET: Registered protocol family 15 [ 4.326800] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.340359] Bluetooth: RFCOMM socket layer initialized [ 4.345135] Bluetooth: RFCOMM ver 1.11 [ 4.348717] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.354806] Bluetooth: HIDP socket layer initialized [ 4.360231] 9pnet: Installing 9P2000 support [ 4.364256] Key type dns_resolver registered [ 4.369701] registered taskstats version 1 [ 4.372403] Loading compiled-in X.509 certificates [ 4.384768] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.388684] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.399285] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.400649] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.408941] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.417305] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.533597] tegra194-pcie 14160000.pcie: Link up [ 4.536449] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.536669] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.536881] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.537117] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.537312] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.537743] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.538219] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.551243] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.551859] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.552316] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.553994] pci 0004:01:00.0: supports D1 D2 [ 4.554170] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.563163] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.563520] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.563828] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.564224] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.564559] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.564775] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.568488] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.575795] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.584313] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.594600] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.599006] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.604942] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.611309] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.620382] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.622273] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.630470] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.639192] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.754126] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.754733] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.754913] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.755086] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.755328] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.755487] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.755852] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.756250] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.774323] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.774636] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.776248] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.777813] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.778879] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.780368] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.781341] pci 0005:00:00.0: Removing from iommu group 7 [ 5.781738] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.816534] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.838509] host1x 13e10000.host1x: initialized [ 5.840091] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.840956] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.842253] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.842869] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.843850] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.844391] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.845297] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.845862] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.847181] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.854344] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.864369] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.871079] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.881078] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.888203] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.898185] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.904935] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.915062] falcon 15340000.vic: Adding to iommu group 17 [ 5.929136] falcon 15340000.vic: initialized [ 5.930224] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.935373] falcon 15380000.nvjpg: initialized [ 5.935928] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.947910] falcon 154c0000.nvenc: initialized [ 5.948439] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.957838] falcon 15a80000.nvenc1: initialized [ 5.958435] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.969930] nvdec 15480000.nvdec: initialized [ 5.970521] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.979740] nvdec 15140000.nvdec1: initialized [ 5.980305] tsec 15500000.tsec: Adding to iommu group 18 [ 5.986361] tsec 15500000.tsec: initialized [ 5.986827] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.995213] tsec 15100000.tsecb: initialized [ 5.999480] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.024789] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.036377] gpio-374 (wifi-enable): hogged as output/high [ 6.036661] gpio-431 (camera-control-output-low): hogged as output/low [ 6.036865] gpio-432 (camera-control-output-low): hogged as output/low [ 6.038624] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.040133] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.040599] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.046220] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.051698] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.057651] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.063115] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.071044] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.078648] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.089828] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.095292] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.101152] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.110091] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.119579] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.126745] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.134336] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.140319] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.150211] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.156470] pva 16000000.pva0: Adding to iommu group 22 [ 6.182337] pva 16000000.pva0: initialized [ 6.187141] pva 16800000.pva1: Adding to iommu group 23 [ 6.205240] pva 16800000.pva1: initialized [ 6.209871] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.222531] nvdla 15880000.nvdla0: initialized [ 6.223849] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.231613] nvdla 158c0000.nvdla1: initialized [ 6.236357] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.236744] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.236844] tegradc 15200000.display: Adding to iommu group 26 [ 6.236904] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.236968] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.237249] tegradccommon 15200000.display-hub: dma mapping done [ 6.238305] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.240793] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.245647] tegra_cec 3960000.tegra_cec: probed [ 6.246192] tegradc 15210000.display: Adding to iommu group 26 [ 6.246478] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.246664] generic_infoframe_type: 0x87 [ 6.246778] tegradc 15200000.display: DT parsed successfully [ 6.246857] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.251268] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.256490] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.263375] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.266397] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.266408] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.280392] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.287764] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.294302] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.316751] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.322788] kfuse 3830000.kfuse: initialized [ 6.346902] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.351709] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.364410] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.364648] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.371178] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.379450] tegradc 15210000.display: disp0 connected to head1->sor [ 6.384536] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.389990] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.400237] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.406101] tegradc 15210000.display: DT parsed successfully [ 6.412916] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.417389] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.435608] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.440583] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.460831] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.461184] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.463937] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.472329] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.480872] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.487712] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.495276] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.502179] usb usb1: Product: xHCI Host Controller [ 6.507413] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.513735] usb usb1: SerialNumber: 3610000.xhci [ 6.519234] hub 1-0:1.0: USB hub found [ 6.522052] hub 1-0:1.0: 4 ports detected [ 6.526638] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.531677] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.539280] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.546989] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.554589] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.561829] usb usb2: Product: xHCI Host Controller [ 6.567067] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.573059] usb usb2: SerialNumber: 3610000.xhci [ 6.578381] hub 2-0:1.0: USB hub found [ 6.581837] hub 2-0:1.0: 4 ports detected [ 6.621709] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.627086] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.628183] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.628381] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.641742] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.642761] tegra194-cpufreq ccplex: probed with BWMGR [ 6.644094] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.644849] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.645340] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.646674] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.656344] tegra194-vi5 15c10000.vi: initialized [ 6.657716] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.662269] generic_infoframe_type: 0x87 [ 6.662719] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.665723] tegradc 15200000.display: DT parsed successfully [ 6.672420] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.677882] mmc0: CQHCI version 5.10 [ 6.677970] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.685539] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.685549] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.689981] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.697116] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.703909] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.703914] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.704654] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.710577] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.717559] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.718338] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.718960] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.725527] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.733926] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.741450] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.742735] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.749090] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.760809] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.776736] tegradc 15200000.display: probed [ 6.781362] nvethernet 2490000.ethernet: Macsec not supported [ 6.804773] mmc0: Command Queue Engine enabled [ 6.808418] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.814101] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.814131] mmc0: periodic cache flush enabled [ 6.823082] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.826410] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.832082] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.836847] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.844347] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.851373] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.857056] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.871848] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.876493] tegra-se-nvhost 15810000.se: initialized [ 6.913167] Console: switching to colour frame buffer device 240x67 [ 6.917736] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.918751] tegradc 15200000.display: fb registered [ 6.925844] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.930355] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.937085] tegra-se-nvhost 15820000.se: initialized [ 6.942783] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.948484] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.953127] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.959328] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.971993] tegra-se-nvhost 15830000.se: initialized [ 6.977483] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.982796] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.989642] tegra-se-nvhost 15840000.se: initialized [ 6.995169] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.001297] tegra_actmon d230000.actmon: in actmon_register()... [ 7.005262] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.005731] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.013931] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.013936] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.013940] usb 1-2: Manufacturer: Generic [ 7.016342] hub 1-2:1.0: USB hub found [ 7.018468] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.019614] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.020056] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.020730] hvc_sysfs: hypervisor is not present [ 7.027797] hub 1-2:1.0: 4 ports detected [ 7.031341] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.047063] ALSA device list: [ 7.072799] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.080420] No soundcards found. [ 7.083483] Extcon AUX1(HDMI) enable [ 7.083607] tegradc 15210000.display: disp1 connected to head1->sor [ 7.104050] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.111136] tegradc 15210000.display: DT parsed successfully [ 7.117024] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.122442] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.125197] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.138606] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.151778] tegradc 15210000.display: probed [ 7.152166] tegradc 15210000.display: fb registered [ 7.157447] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.160970] Freeing unused kernel memory: 3968K [ 7.161367] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.161377] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.170120] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.179322] Run /init as init process [ 7.187695] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.187700] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.187704] usb 2-3: Manufacturer: Generic [ 7.207364] tegradc 15210000.display: blank - powerdown [ 7.212492] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.212495] Extcon DP: HPD disabled [ 7.212499] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.212510] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.212518] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.248424] hub 2-3:1.0: USB hub found [ 7.250481] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.257171] tegradc 15200000.display: blank - powerdown [ 7.298804] Root device found: mmcblk0p1 [ 7.300845] Found dev node: /dev/mmcblk0p1 [ 7.302254] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.302258] Extcon AUX1(HDMI) disable [ 7.305591] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.325718] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.326649] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.329572] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.329577] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.336253] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.340052] tegradc 15200000.display: unblank [ 7.340275] Rootfs mounted over mmcblk0p1 [ 7.341173] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.341545] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.348180] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.352546] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.359299] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.359302] Extcon AUX1(HDMI) enable [ 7.369353] tegradc 15200000.display: sync windows ret = 248 [ 7.381657] Switching from initrd to actual rootfs [ 7.411065] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.412588] Extcon HDMI: HPD enabled [ 7.413967] tegradc 15200000.display: hdmi: plugged [ 7.462806] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.464345] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.465847] usb 1-3: Product: Bluetooth Radio [ 7.467222] usb 1-3: Manufacturer: Realtek [ 7.468604] usb 1-3: SerialNumber: 00e04c000001 [ 7.563669] systemd[1]: System time before build time, advancing clock. [ 7.635754] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.640817] systemd[1]: Detected architecture arm64. [ 7.690874] systemd[1]: Set hostname to . [ 7.763980] random: crng init done [ 7.861241] systemd-sysv-generator[250]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.226905] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.228729] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.234518] systemd[1]: Created slice system-modprobe.slice. [ 8.239195] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.243590] systemd[1]: Created slice User and Session Slice. [ 8.247219] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.251676] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.255279] systemd[1]: Reached target User and Group Name Lookups. [ 8.258804] systemd[1]: Reached target Slices. [ 8.262029] systemd[1]: Reached target Swap. [ 8.266199] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.269938] systemd[1]: Listening on Syslog Socket. [ 8.273614] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.277062] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.281457] systemd[1]: Listening on Journal Audit Socket. [ 8.285200] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.289124] systemd[1]: Listening on Journal Socket. [ 8.292913] systemd[1]: Listening on udev Control Socket. [ 8.296492] systemd[1]: Listening on udev Kernel Socket. [ 8.304906] systemd[1]: Mounting Huge Pages File System... [ 8.313449] systemd[1]: Mounting POSIX Message Queue File System... [ 8.324629] systemd[1]: Mounting RPC Pipe File System... [ 8.333368] systemd[1]: Mounting Kernel Debug File System... [ 8.342171] systemd[1]: Mounting Kernel Trace File System... [ 8.352798] systemd[1]: Starting Journal Service... [ 8.362197] systemd[1]: Starting Set the console keyboard layout... [ 8.370785] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.374369] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.380975] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.389369] systemd[1]: Started Nameserver information manager. [ 8.394633] systemd[1]: Reached target Network (Pre). [ 8.401909] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.403798] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.412983] systemd[1]: Starting Load Kernel Modules... [ 8.421271] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.430553] systemd[1]: Starting udev Coldplug all Devices... [ 8.440828] systemd[1]: Mounted Huge Pages File System. [ 8.444741] systemd[1]: Mounted POSIX Message Queue File System. [ 8.449410] systemd[1]: Mounted RPC Pipe File System. [ 8.452237] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.455219] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.457288] systemd[1]: Mounted Kernel Debug File System. [ 8.457671] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.460401] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.460416] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.460420] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.460662] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.462193] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.468292] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.468307] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.474247] systemd[1]: Mounted Kernel Trace File System. [ 8.480822] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.485877] systemd[1]: nvfb-udev.service: Succeeded. [ 8.490418] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.500283] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.505414] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.507219] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.519751] systemd[1]: Starting Load/Save Random Seed... [ 8.528244] systemd[1]: Starting Create System Users... [ 8.568821] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.568821] [ 8.583852] systemd[1]: Finished Load/Save Random Seed. [ 8.599425] systemd[1]: Finished Create System Users. [ 8.607045] systemd[1]: Finished Load Kernel Modules. [ 8.611590] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.618784] systemd[1]: Mounting Kernel Configuration File System... [ 8.627822] systemd[1]: Started OP-TEE Client Supplicant. [ 8.637554] systemd[1]: Starting Apply Kernel Variables... [ 8.646043] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.656818] systemd[1]: Finished Set the console keyboard layout. [ 8.661859] systemd[1]: Mounted Kernel Configuration File System. [ 10.098939] hot-surface-alert cooling state: 0 -> 1 [ 10.114599] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.120071] imx219 9-0010: board setup failed [ 10.121397] imx219: probe of 9-0010 failed with error -121 [ 10.133665] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.145833] imx219 10-0010: board setup failed [ 10.147162] imx219: probe of 10-0010 failed with error -121 [ 11.022768] using random self ethernet address [ 11.024412] using random host ethernet address [ 11.567043] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.568827] Creating 1 MTD partitions on "spi6.0": [ 11.570952] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.491245] using random self ethernet address [ 12.492784] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.814433] nvidia: loading out-of-tree module taints kernel. [ 59.155530] watchdog: watchdog0: watchdog did not stop! [ 59.627109] Trying to unregister non-registered hwtime source [ 62.692559] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.694166] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ôÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.421] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> hdmi cable connected [0003.611] W> set volts not configured for 'vdd-1v0' [0003.617] W> set volts not configured for 'vdd-1v8-hs' [0003.617] I> retrieved tmds range from prod_list_hdmi_soc [0003.624] E> invalid display type [0003.625] E> cannot find any other nvdisp nodes [0003.642] I> edid read success [0003.654] I> edid read success [0003.655] I> width = 640, height = 480, frequency = 25174825 [0003.655] I> width = 1920, height = 1080, frequency = 148500000 [0003.655] I> width = 1280, height = 768, frequency = 79500000 [0003.656] I> width = 1360, height = 768, frequency = 85500000 [0003.656] I> width = 720, height = 480, frequency = 26973026 [0003.660] I> width = 720, height = 576, frequency = 26973026 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1280, height = 720, frequency = 74175824 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 1920, height = 1080, frequency = 148351648 [0003.688] I> width = 720, height = 480, frequency = 26973026 [0003.694] I> width = 720, height = 576, frequency = 26973026 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 3840, height = 2160, frequency = 296703296 [0003.722] I> width = 4096, height = 2160, frequency = 296703296 [0003.728] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.740] I> hdmi_enable, starting HDMI initialisation [0003.744] I> hdmi_enable, HDMI initialisation complete [0003.753] initializing target [0003.754] calling apps_init() [0003.755] starting app kernel_boot_app [0003.756] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000849] Console: colour dummy device 80x25 [ 0.002423] printk: console [tty0] enabled [ 0.002487] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002543] pid_max: default: 32768 minimum: 301 [ 0.002722] LSM: Security Framework initializing [ 0.002787] Yama: becoming mindful. [ 0.002847] SELinux: Initializing. [ 0.003032] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003070] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006030] rcu: Hierarchical SRCU implementation. [ 0.006296] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007205] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007260] DTB Build time: Aug 10 2022 20:31:49 [ 0.010253] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010523] Remapping and enabling EFI services. [ 0.012449] smp: Bringing up secondary CPUs ... [ 0.041636] Detected PIPT I-cache on CPU1 [ 0.041696] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071233] Detected PIPT I-cache on CPU2 [ 0.071308] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100767] Detected PIPT I-cache on CPU3 [ 0.100835] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130430] Detected PIPT I-cache on CPU4 [ 0.130572] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160224] Detected PIPT I-cache on CPU5 [ 0.160292] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160626] smp: Brought up 1 node, 6 CPUs [ 0.160860] SMP: Total of 6 processors activated. [ 0.160908] CPU features: detected: Privileged Access Never [ 0.160931] CPU features: detected: LSE atomic instructions [ 0.160946] CPU features: detected: User Access Override [ 0.160978] CPU features: detected: 32-bit EL0 Support [ 0.160993] CPU features: detected: RAS Extension Support [ 0.161033] CPU features: detected: CRC32 instructions [ 0.161048] CPU features: detected: 32-bit EL1 Support [ 0.226966] CPU: All CPU(s) started at EL2 [ 0.232044] devtmpfs: initialized [ 0.298413] Registered cp15_barrier emulation handler [ 0.298506] Registered setend emulation handler [ 0.298535] KASLR enabled [ 0.298772] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.298821] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.300495] pinctrl core: initialized pinctrl subsystem [ 0.301576] SMBIOS 3.0.0 present. [ 0.301622] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.302510] NET: Registered protocol family 16 [ 0.304821] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.305545] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.306074] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.306260] audit: initializing netlink subsys (disabled) [ 0.306618] audit: type=2000 audit(0.304:1): state=initialized audit_enabled=0 res=1 [ 0.307057] thermal_sys: Registered thermal governor 'step_wise' [ 0.307067] thermal_sys: Registered thermal governor 'power_allocator' [ 0.307091] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.310092] cpuidle: using governor menu [ 0.310625] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.311010] ASID allocator initialised with 32768 entries [ 0.311320] Serial: AMBA PL011 UART driver [ 0.314893] Tegra reboot handler registered. [ 0.378333] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.378500] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.378710] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.378764] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.378907] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.378956] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.379080] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.379125] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.379269] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.379315] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.382034] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.382079] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.382111] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.382141] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.382173] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.382213] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.382251] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.382282] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.382309] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.382335] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.382361] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.382387] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.382413] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.382440] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.382467] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.382493] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.382535] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.382650] mc-err: mcerr ops are set to t19x [ 0.393748] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.393781] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.393794] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.393808] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399773] ACPI: Interpreter disabled. [ 0.401088] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.402324] iommu: Default domain type: Translated [ 0.402386] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.402806] SCSI subsystem initialized [ 0.402955] usbcore: registered new interface driver usbfs [ 0.402999] usbcore: registered new interface driver hub [ 0.403031] usbcore: registered new device driver usb [ 0.403465] mc: Linux media interface: v0.10 [ 0.403491] videodev: Linux video capture interface: v2.00 [ 0.403803] pps_core: LinuxPPS API ver. 1 registered [ 0.403815] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403835] PTP clock support registered [ 0.404042] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404326] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.404422] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.405033] Registered efivars operations [ 0.410410] FPGA manager framework [ 0.410512] Advanced Linux Sound Architecture Driver Initialized. [ 0.411179] Bluetooth: Core ver 2.22 [ 0.411219] NET: Registered protocol family 31 [ 0.411232] Bluetooth: HCI device and connection manager initialized [ 0.411248] Bluetooth: HCI socket layer initialized [ 0.411261] Bluetooth: L2CAP socket layer initialized [ 0.411282] Bluetooth: SCO socket layer initialized [ 0.412686] camchar: rtcpu character device driver loaded [ 0.413393] clocksource: Switched to clocksource arch_sys_counter [ 0.809800] VFS: Disk quotas dquot_6.6.0 [ 0.809949] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.810324] pnp: PnP ACPI: disabled [ 0.822529] la/ptsa driver initialized. [ 0.822679] NET: Registered protocol family 2 [ 0.822903] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.832096] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.832259] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.832639] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.833281] TCP: Hash tables configured (established 65536 bind 65536) [ 0.833476] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.833605] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.833924] NET: Registered protocol family 1 [ 0.834763] RPC: Registered named UNIX socket transport module. [ 0.834834] RPC: Registered udp transport module. [ 0.834855] RPC: Registered tcp transport module. [ 0.834874] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.834905] PCI: CLS 0 bytes, default 64 [ 0.835224] Trying to unpack rootfs image as initramfs... [ 1.101203] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.104116] Freeing initrd memory: 8196K [ 1.108731] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.108802] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.108861] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.109236] kvm [1]: IPA Size Limit: 40 bits [ 1.109787] kvm [1]: vgic interrupt IRQ9 [ 1.110302] kvm [1]: VHE mode initialized successfully [ 1.111598] Initialise system trusted keyrings [ 1.111880] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.117484] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.118260] NFS: Registering the id_resolver key type [ 1.118297] Key type id_resolver registered [ 1.118312] Key type id_legacy registered [ 1.118399] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.118423] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.118460] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.128278] NET: Registered protocol family 38 [ 1.128303] Key type asymmetric registered [ 1.128317] Asymmetric key parser 'x509' registered [ 1.128364] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.128624] io scheduler mq-deadline registered [ 1.128642] io scheduler kyber registered [ 1.134936] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.138365] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.138498] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.138607] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.138685] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.138789] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.145108] scrncapt: init (heads:4 wins:6 planes:4) [ 1.145122] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.146260] EINJ: ACPI disabled. [ 1.150194] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.150223] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.150273] tegra-pmc: ### PMC reset level: L1 [ 1.150288] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.150378] tegra-pmc: PMC Prod config success [ 1.155888] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.161364] random: fast init done [ 1.162032] printk: console [ttyTCU0] enabled [ 2.713771] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.717930] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.722455] arm-smmu 10000000.iommu: stage 1 translation [ 2.728219] arm-smmu 10000000.iommu: stage 2 translation [ 2.733496] arm-smmu 10000000.iommu: nested translation [ 2.739072] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.746252] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.755103] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.759389] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.765940] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.773281] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.778978] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.783444] arm-smmu 12000000.iommu: stage 1 translation [ 2.788949] arm-smmu 12000000.iommu: stage 2 translation [ 2.794630] arm-smmu 12000000.iommu: nested translation [ 2.799800] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.807235] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.815960] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.820372] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.826922] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.833998] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.844033] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.847315] tegra_profiler: auth: init [ 2.851240] THERMAL EST: found 3 subdevs [ 2.855021] THERMAL EST num_resources: 0 [ 2.858859] [THERMAL EST subdev 0] [ 2.861924] [THERMAL EST subdev 1] [ 2.865592] [THERMAL EST subdev 2] [ 2.868591] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.875258] THERMAL EST: thz register success. [ 2.879538] THERMAL EST: end of probe, return err: 0 [ 2.884718] nvsciipc: loaded module [ 2.891295] tun: Universal TUN/TAP device driver, 1.6 [ 2.893955] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.900360] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.906181] e1000e: Intel(R) PRO/1000 Network Driver [ 2.910836] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.916911] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.922212] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.928315] PPP generic driver version 2.4.2 [ 2.932597] PPP BSD Compression module registered [ 2.937447] PPP Deflate Compression module registered [ 2.942705] PPP MPPE Compression module registered [ 2.947446] usbcore: registered new interface driver r8152 [ 2.952949] usbcore: registered new interface driver asix [ 2.958291] usbcore: registered new interface driver ax88179_178a [ 2.964663] usbcore: registered new interface driver cdc_ether [ 2.970613] usbcore: registered new interface driver net1080 [ 2.975954] usbcore: registered new interface driver cdc_subset [ 2.982271] usbcore: registered new interface driver zaurus [ 2.987946] usbcore: registered new interface driver cdc_ncm [ 2.993625] usbcore: registered new interface driver aqc111 [ 2.999044] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.005091] ohci-pci: OHCI PCI platform driver [ 3.009398] ohci-platform: OHCI generic platform driver [ 3.015367] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.021668] usbcore: registered new interface driver uas [ 3.025688] usbcore: registered new interface driver usb-storage [ 3.031763] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.037897] mousedev: PS/2 mouse device common for all mice [ 3.043107] usbcore: registered new interface driver xpad [ 3.050931] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.053584] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.061415] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.068138] i2c /dev entries driver [ 3.071245] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.077307] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.082353] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.087982] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.093053] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.098837] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.104035] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.115796] device-mapper: uevent: version 1.0.3 [ 3.116175] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.124301] cpuidle: Initializing cpuidle driver [ 3.128201] sdhci: Secure Digital Host Controller Interface driver [ 3.133198] sdhci: Copyright(c) Pierre Ossman [ 3.137289] Synopsys Designware Multimedia Card Interface Driver [ 3.143463] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.149404] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.149931] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.162748] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.180834] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.189751] vdd-1v0: supplied by regulator-dummy [ 3.195109] vdd-1v8-hs: supplied by regulator-dummy [ 3.199728] vdd-1v8-ls: supplied by regulator-dummy [ 3.204390] vdd-1v8-ao: supplied by regulator-dummy [ 3.208199] vddio-ddr-1v1: supplied by regulator-dummy [ 3.212568] vdd-rtc: supplied by regulator-dummy [ 3.214218] spmic-ldo1: supplied by regulator-dummy [ 3.215324] vdd-ao-3v3: supplied by regulator-dummy [ 3.221383] vddio-emmc-3v3: supplied by regulator-dummy [ 3.227588] spmic-ldo4: supplied by regulator-dummy [ 3.228714] vdd-usb-3v3: supplied by regulator-dummy [ 3.234728] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.240759] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.246117] spmic-ldo8: supplied by vdd-1v8-ls [ 3.247429] gpio-510 (gpio_default): hogged as output/high [ 3.249453] gpio-511 (gpio_default): hogged as output/high [ 3.256646] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.395448] max77686-rtc max77620-rtc: registered as rtc0 [ 3.396668] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.396956] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.115037] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.116092] hid: raw HID events driver (C) Jiri Kosina [ 4.116746] usbcore: registered new interface driver usbhid [ 4.116882] usbhid: USB HID core driver [ 4.118699] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.119777] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.153438] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.229125] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.498 ms) ÿá[ 4.204945] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.205594] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.206489] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.207207] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.208715] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.209259] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.209919] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.211098] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.211300] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.212765] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.220958] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.227755] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.232498] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.239553] denver_knobs_init:MTS_VERSION:55637613 [ 4.251716] t19x_cache tegra-cache: probed [ 4.254732] optee: probing for conduit method. [ 4.255539] optee: revision 3.16 (65cc2218) [ 4.256407] optee: dynamic shared memory is enabled [ 4.259994] optee: initialized driver [ 4.267092] nvpmodel: initialized successfully [ 4.267671] tegra_hv: get_hvd: not initialized yet [ 4.272512] user_ivc_mempool: hypervisor not present [ 4.278340] usbcore: registered new interface driver snd-usb-audio [ 4.284780] u32 classifier [ 4.286124] input device check on [ 4.289713] Actions configured [ 4.293650] Initializing XFRM netlink socket [ 4.298755] NET: Registered protocol family 10 [ 4.305090] Segment Routing with IPv6 [ 4.305650] NET: Registered protocol family 17 [ 4.310136] NET: Registered protocol family 15 [ 4.314313] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.328179] Bluetooth: RFCOMM socket layer initialized [ 4.332807] Bluetooth: RFCOMM ver 1.11 [ 4.336437] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.342299] Bluetooth: HIDP socket layer initialized [ 4.348536] 9pnet: Installing 9P2000 support [ 4.351801] Key type dns_resolver registered [ 4.357226] registered taskstats version 1 [ 4.360458] Loading compiled-in X.509 certificates [ 4.373146] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.376036] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.386379] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.388113] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.396977] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.405334] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.521472] tegra194-pcie 14160000.pcie: Link up [ 4.524466] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.524737] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.524894] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.525137] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.525330] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.525763] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.526197] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.538901] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.539456] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.539918] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.541573] pci 0004:01:00.0: supports D1 D2 [ 4.541778] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.550841] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.551202] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.551493] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.551878] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.552118] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.552291] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.556234] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.563508] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.572019] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.582589] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.587147] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.592232] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.599511] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.608654] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.610263] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.618400] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.626861] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.742055] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.742713] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.742918] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.743068] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.743312] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.743537] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.743911] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.744363] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.762660] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.763095] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.764908] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.766533] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.768254] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.769869] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.770760] pci 0005:00:00.0: Removing from iommu group 7 [ 5.771071] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.803211] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.823398] host1x 13e10000.host1x: initialized [ 5.824894] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.825919] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.827037] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.827697] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.828728] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.829316] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.830553] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.831124] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.835146] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.842443] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.852327] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.858991] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.869150] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.876259] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.885814] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.893224] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.903303] falcon 15340000.vic: Adding to iommu group 17 [ 5.917708] falcon 15340000.vic: initialized [ 5.918761] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.924215] falcon 15380000.nvjpg: initialized [ 5.924870] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.935274] falcon 154c0000.nvenc: initialized [ 5.935936] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.945939] falcon 15a80000.nvenc1: initialized [ 5.946511] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.957920] nvdec 15480000.nvdec: initialized [ 5.958688] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.968224] nvdec 15140000.nvdec1: initialized [ 5.968806] tsec 15500000.tsec: Adding to iommu group 18 [ 5.973784] tsec 15500000.tsec: initialized [ 5.974278] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.982640] tsec 15100000.tsecb: initialized [ 5.986188] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.012588] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.024886] gpio-374 (wifi-enable): hogged as output/high [ 6.025245] gpio-431 (camera-control-output-low): hogged as output/low [ 6.025557] gpio-432 (camera-control-output-low): hogged as output/low [ 6.027144] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.028945] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.029617] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.034044] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.039675] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.045210] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.050705] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.059143] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.067045] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.078703] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.083515] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.089396] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.097991] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.107467] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.114563] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.122236] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.128505] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.137776] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.144093] pva 16000000.pva0: Adding to iommu group 22 [ 6.170091] pva 16000000.pva0: initialized [ 6.174866] pva 16800000.pva1: Adding to iommu group 23 [ 6.185826] pva 16800000.pva1: initialized [ 6.189798] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.201737] nvdla 15880000.nvdla0: initialized [ 6.202959] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.211232] nvdla 158c0000.nvdla1: initialized [ 6.213861] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.214162] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.214731] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.215400] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.215560] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.215734] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.215834] tegradccommon 15200000.display-hub: dma mapping done [ 6.215959] tegradc 15200000.display: Adding to iommu group 26 [ 6.215995] tegra_cec 3960000.tegra_cec: probed [ 6.217790] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.223987] tegradc 15210000.display: Adding to iommu group 26 [ 6.224305] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.224435] generic_infoframe_type: 0x87 [ 6.224533] tegradc 15200000.display: DT parsed successfully [ 6.224649] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.227870] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.249961] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.258268] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.260024] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.266316] kfuse 3830000.kfuse: initialized [ 6.274212] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.288540] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.295836] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.303411] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.321572] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.328080] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.328755] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.352385] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.358418] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.374449] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.375669] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.382648] tegradc 15210000.display: disp0 connected to head1->sor [ 6.387015] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.392797] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.402511] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.408716] tegradc 15210000.display: DT parsed successfully [ 6.415447] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.420287] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.448561] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.448947] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.451787] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.460523] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.468900] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.475734] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.483036] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.490273] usb usb1: Product: xHCI Host Controller [ 6.495273] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.501614] usb usb1: SerialNumber: 3610000.xhci [ 6.507019] hub 1-0:1.0: USB hub found [ 6.510341] hub 1-0:1.0: 4 ports detected [ 6.514791] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.519443] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.527297] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.534953] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.542814] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.549851] usb usb2: Product: xHCI Host Controller [ 6.555035] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.560989] usb usb2: SerialNumber: 3610000.xhci [ 6.566532] hub 2-0:1.0: USB hub found [ 6.569573] hub 2-0:1.0: 4 ports detected [ 6.609665] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.614851] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.616255] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.616470] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.630169] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.631205] tegra194-cpufreq ccplex: probed with BWMGR [ 6.632360] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.633031] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.633562] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.634715] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.643264] mmc0: CQHCI version 5.10 [ 6.644523] tegra194-vi5 15c10000.vi: initialized [ 6.648674] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.649846] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.653462] generic_infoframe_type: 0x87 [ 6.659802] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.663667] tegradc 15200000.display: DT parsed successfully [ 6.671917] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.677517] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.683945] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.698545] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.704843] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.712506] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.717440] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.719796] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.724394] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.726288] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.734569] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.748855] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.756818] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.762847] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.770354] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.777425] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.794430] nvethernet 2490000.ethernet: Macsec not supported [ 6.801636] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.802064] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.807726] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.809942] tegradc 15200000.display: probed [ 6.817108] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.833915] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.837508] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.841107] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.855914] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.862857] tegra-se-nvhost 15810000.se: initialized [ 6.870635] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.872318] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.878573] tegra-se-nvhost 15820000.se: initialized [ 6.883237] Console: switching to colour frame buffer device 240x67 [ 6.885630] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.888974] tegradc 15200000.display: fb registered [ 6.895604] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.900096] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.912352] tegra-se-nvhost 15830000.se: initialized [ 6.912919] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.918395] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.923325] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.929778] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.943107] tegra-se-nvhost 15840000.se: initialized [ 6.948137] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.950484] mmc0: Command Queue Engine enabled [ 6.954075] tegra_actmon d230000.actmon: in actmon_register()... [ 6.956916] mmc0: periodic cache flush enabled [ 6.962996] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.966897] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.967446] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.972933] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.979286] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.984265] hvc_sysfs: hypervisor is not present [ 6.990783] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.992935] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.020382] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.036545] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.036786] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.043915] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.046096] ALSA device list: [ 7.048241] usb 1-2: Manufacturer: Generic [ 7.051176] No soundcards found. [ 7.060054] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.064501] hub 1-2:1.0: USB hub found [ 7.066310] Extcon AUX1(HDMI) enable [ 7.071353] hub 1-2:1.0: 4 ports detected [ 7.073697] tegradc 15210000.display: disp1 connected to head1->sor [ 7.080695] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.084150] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.099628] tegradc 15210000.display: DT parsed successfully [ 7.104914] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.113209] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.118886] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.132067] tegradc 15210000.display: probed [ 7.132366] tegradc 15210000.display: fb registered [ 7.137849] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.141541] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.143036] Freeing unused kernel memory: 3968K [ 7.149507] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.159815] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.159820] tegradc 15210000.display: blank - powerdown [ 7.165521] Run /init as init process [ 7.167371] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.176186] Extcon DP: HPD disabled [ 7.176191] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.176200] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.176208] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.213853] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.215464] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.222941] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.227645] usb 2-3: Manufacturer: Generic ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.231952] tegradc 15200000.display: blank - powerdown [ 7.243219] hub 2-3:1.0: USB hub found [ 7.245094] hub 2-3:1.0: 4 ports detected [ 7.263510] Root device found: mmcblk0p1 [ 7.265492] Found dev node: /dev/mmcblk0p1 [ 7.274562] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.274566] Extcon AUX1(HDMI) disable [ 7.297402] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.297408] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.297878] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.298725] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.300936] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.304956] Rootfs mounted over mmcblk0p1 [ 7.312695] tegradc 15200000.display: unblank [ 7.313794] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.314107] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.320305] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.322308] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.326451] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.326455] Extcon AUX1(HDMI) enable [ 7.333402] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.339062] tegradc 15200000.display: sync windows ret = 247 [ 7.341285] Switching from initrd to actual rootfs [ 7.380765] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.387657] Extcon HDMI: HPD enabled [ 7.391229] tegradc 15200000.display: hdmi: plugged [ 7.486615] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.488032] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.489375] usb 1-3: Product: Bluetooth Radio [ 7.490623] usb 1-3: Manufacturer: Realtek [ 7.491864] usb 1-3: SerialNumber: 00e04c000001 [ 7.548440] systemd[1]: System time before build time, advancing clock. [ 7.618594] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.623564] systemd[1]: Detected architecture arm64. [ 7.667259] systemd[1]: Set hostname to . [ 7.834920] systemd-sysv-generator[245]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.931752] random: crng init done [ 8.183255] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.184969] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.190847] systemd[1]: Created slice system-modprobe.slice. [ 8.195515] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.199859] systemd[1]: Created slice User and Session Slice. [ 8.203383] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.207722] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.213092] systemd[1]: Reached target User and Group Name Lookups. [ 8.218982] systemd[1]: Reached target Slices. [ 8.224732] systemd[1]: Reached target Swap. [ 8.230093] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.233792] systemd[1]: Listening on Syslog Socket. [ 8.237414] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.240886] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.245207] systemd[1]: Listening on Journal Audit Socket. [ 8.248909] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.252756] systemd[1]: Listening on Journal Socket. [ 8.256616] systemd[1]: Listening on udev Control Socket. [ 8.260242] systemd[1]: Listening on udev Kernel Socket. [ 8.269130] systemd[1]: Mounting Huge Pages File System... [ 8.277921] systemd[1]: Mounting POSIX Message Queue File System... [ 8.286261] systemd[1]: Mounting RPC Pipe File System... [ 8.295425] systemd[1]: Mounting Kernel Debug File System... [ 8.304628] systemd[1]: Mounting Kernel Trace File System... [ 8.315340] systemd[1]: Starting Journal Service... [ 8.324735] systemd[1]: Starting Set the console keyboard layout... [ 8.334055] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.339307] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.346172] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.355363] systemd[1]: Started Nameserver information manager. [ 8.360187] systemd[1]: Reached target Network (Pre). [ 8.367381] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.369341] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.377965] systemd[1]: Starting Load Kernel Modules... [ 8.385926] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.394373] systemd[1]: Starting udev Coldplug all Devices... [ 8.405834] systemd[1]: Mounted Huge Pages File System. [ 8.409862] systemd[1]: Mounted POSIX Message Queue File System. [ 8.418311] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.418360] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.418744] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.418750] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.418761] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.418766] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.419509] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.420859] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.422501] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.432964] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.439480] systemd[1]: Mounted RPC Pipe File System. [ 8.443329] systemd[1]: Mounted Kernel Debug File System. [ 8.447206] systemd[1]: Mounted Kernel Trace File System. [ 8.455696] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.460839] systemd[1]: nvfb-udev.service: Succeeded. [ 8.465738] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.476095] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.489176] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.492053] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.500454] systemd[1]: Starting Load/Save Random Seed... [ 8.509140] systemd[1]: Starting Create System Users... [ 8.530003] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.530003] [ 8.563793] systemd[1]: Finished Load/Save Random Seed. [ 8.570794] systemd[1]: Finished Load Kernel Modules. [ 8.578350] systemd[1]: Finished Set the console keyboard layout. [ 8.591206] systemd[1]: Finished Create System Users. [ 8.595751] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.602507] systemd[1]: Mounting Kernel Configuration File System... [ 8.610952] systemd[1]: Started OP-TEE Client Supplicant. [ 8.620224] systemd[1]: Starting Apply Kernel Variables... [ 8.628808] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.636626] systemd[1]: Mounted Kernel Configuration File System. [ 9.934182] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.945238] imx219 9-0010: board setup failed [ 9.945339] imx219: probe of 9-0010 failed with error -121 [ 9.963808] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.968992] imx219 10-0010: board setup failed [ 9.970675] imx219: probe of 10-0010 failed with error -121 [ 10.073425] hot-surface-alert cooling state: 0 -> 1 [ 10.980810] using random self ethernet address [ 11.020067] using random host ethernet address [ 11.359769] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.359775] Creating 1 MTD partitions on "spi6.0": [ 11.359788] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.252759] using random self ethernet address [ 12.254219] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.804042] nvidia: loading out-of-tree module taints kernel. [ 59.466957] watchdog: watchdog0: watchdog did not stop! [ 59.914170] Trying to unregister non-registered hwtime source [ 62.972247] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.973857] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: Thÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäis OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.609] W> set volts not configured for 'vdd-1v0' [0003.614] W> set volts not configured for 'vdd-1v8-hs' [0003.615] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.650] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.652] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.750] initializing target [0003.750] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000680] Console: colour dummy device 80x25 [ 0.002274] printk: console [tty0] enabled [ 0.002350] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002401] pid_max: default: 32768 minimum: 301 [ 0.002594] LSM: Security Framework initializing [ 0.002666] Yama: becoming mindful. [ 0.002729] SELinux: Initializing. [ 0.002892] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002935] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005971] rcu: Hierarchical SRCU implementation. [ 0.006252] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006920] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006958] DTB Build time: Aug 10 2022 20:31:49 [ 0.009628] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009850] Remapping and enabling EFI services. [ 0.012229] smp: Bringing up secondary CPUs ... [ 0.041430] Detected PIPT I-cache on CPU1 [ 0.041535] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072923] Detected PIPT I-cache on CPU2 [ 0.073076] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102684] Detected PIPT I-cache on CPU3 [ 0.102776] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133554] Detected PIPT I-cache on CPU4 [ 0.133709] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163341] Detected PIPT I-cache on CPU5 [ 0.163483] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163832] smp: Brought up 1 node, 6 CPUs [ 0.164057] SMP: Total of 6 processors activated. [ 0.164101] CPU features: detected: Privileged Access Never [ 0.164122] CPU features: detected: LSE atomic instructions [ 0.164135] CPU features: detected: User Access Override [ 0.164150] CPU features: detected: 32-bit EL0 Support [ 0.164164] CPU features: detected: RAS Extension Support [ 0.164176] CPU features: detected: CRC32 instructions [ 0.164190] CPU features: detected: 32-bit EL1 Support [ 0.231939] CPU: All CPU(s) started at EL2 [ 0.239387] devtmpfs: initialized [ 0.287273] Registered cp15_barrier emulation handler [ 0.287405] Registered setend emulation handler [ 0.287425] KASLR enabled [ 0.287700] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287722] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289104] pinctrl core: initialized pinctrl subsystem [ 0.290043] SMBIOS 3.0.0 present. [ 0.290071] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.290668] NET: Registered protocol family 16 [ 0.292764] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293266] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293983] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294050] audit: initializing netlink subsys (disabled) [ 0.294293] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.294763] thermal_sys: Registered thermal governor 'step_wise' [ 0.294768] thermal_sys: Registered thermal governor 'power_allocator' [ 0.294782] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.297372] cpuidle: using governor menu [ 0.297795] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.298247] ASID allocator initialised with 32768 entries [ 0.298460] Serial: AMBA PL011 UART driver [ 0.301615] Tegra reboot handler registered. [ 0.377348] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.377491] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.377689] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.377731] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.377859] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.377903] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.378042] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.378108] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.378250] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.378290] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.380373] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.380406] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.380434] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.380461] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.380489] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.380515] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.380550] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.380582] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.380609] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.380632] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.380656] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.380679] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.380701] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.380724] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.380747] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.380770] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.380793] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.380891] mc-err: mcerr ops are set to t19x [ 0.394376] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.394398] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.394427] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.394441] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.401125] ACPI: Interpreter disabled. [ 0.402310] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.403593] iommu: Default domain type: Translated [ 0.403697] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.404123] SCSI subsystem initialized [ 0.404282] usbcore: registered new interface driver usbfs [ 0.404325] usbcore: registered new interface driver hub [ 0.404359] usbcore: registered new device driver usb [ 0.404738] mc: Linux media interface: v0.10 [ 0.404771] videodev: Linux video capture interface: v2.00 [ 0.405057] pps_core: LinuxPPS API ver. 1 registered [ 0.405069] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.405090] PTP clock support registered [ 0.405280] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.405592] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.405679] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.406243] Registered efivars operations [ 0.411725] FPGA manager framework [ 0.411854] Advanced Linux Sound Architecture Driver Initialized. [ 0.412496] Bluetooth: Core ver 2.22 [ 0.412536] NET: Registered protocol family 31 [ 0.412548] Bluetooth: HCI device and connection manager initialized [ 0.412562] Bluetooth: HCI socket layer initialized [ 0.412577] Bluetooth: L2CAP socket layer initialized [ 0.412598] Bluetooth: SCO socket layer initialized [ 0.414135] camchar: rtcpu character device driver loaded [ 0.414962] clocksource: Switched to clocksource arch_sys_counter [ 0.714845] VFS: Disk quotas dquot_6.6.0 [ 0.714939] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.715254] pnp: PnP ACPI: disabled [ 0.728659] la/ptsa driver initialized. [ 0.728801] NET: Registered protocol family 2 [ 0.728956] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.733581] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.733692] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.733945] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.734397] TCP: Hash tables configured (established 65536 bind 65536) [ 0.734539] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.734629] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.734817] NET: Registered protocol family 1 [ 0.735946] RPC: Registered named UNIX socket transport module. [ 0.735981] RPC: Registered udp transport module. [ 0.735999] RPC: Registered tcp transport module. [ 0.736015] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.736042] PCI: CLS 0 bytes, default 64 [ 0.736333] Trying to unpack rootfs image as initramfs... [ 1.002380] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.005586] Freeing initrd memory: 8196K [ 1.010416] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.010454] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.010488] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.010908] kvm [1]: IPA Size Limit: 40 bits [ 1.011494] kvm [1]: vgic interrupt IRQ9 [ 1.012082] kvm [1]: VHE mode initialized successfully [ 1.013903] Initialise system trusted keyrings [ 1.014273] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.022707] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.023803] NFS: Registering the id_resolver key type [ 1.023843] Key type id_resolver registered [ 1.023887] Key type id_legacy registered [ 1.023995] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.024019] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.024054] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.034457] NET: Registered protocol family 38 [ 1.034480] Key type asymmetric registered [ 1.034496] Asymmetric key parser 'x509' registered [ 1.034552] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.034823] io scheduler mq-deadline registered [ 1.034843] io scheduler kyber registered [ 1.041398] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.044663] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.044749] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.044824] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.044895] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.044966] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.050832] scrncapt: init (heads:4 wins:6 planes:4) [ 1.051135] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.051987] EINJ: ACPI disabled. [ 1.055180] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.055209] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.055225] tegra-pmc: ### PMC reset level: L1 [ 1.055240] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.055298] tegra-pmc: PMC Prod config success [ 1.061261] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.098244] random: fast init done [ 1.100954] printk: console [ttyTCU0] enabled [ 2.619016] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.623657] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.627989] arm-smmu 10000000.iommu: stage 1 translation [ 2.633517] arm-smmu 10000000.iommu: stage 2 translation [ 2.639224] arm-smmu 10000000.iommu: nested translation [ 2.644563] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.651760] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.663165] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.664580] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.671426] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.679057] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.684202] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.688928] arm-smmu 12000000.iommu: stage 1 translation [ 2.694693] arm-smmu 12000000.iommu: stage 2 translation [ 2.700118] arm-smmu 12000000.iommu: nested translation [ 2.705548] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.712471] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.724064] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.725568] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.732408] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.739769] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.749614] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.752816] tegra_profiler: auth: init [ 2.756842] THERMAL EST: found 3 subdevs [ 2.760504] THERMAL EST num_resources: 0 [ 2.764089] [THERMAL EST subdev 0] [ 2.767669] [THERMAL EST subdev 1] [ 2.770806] [THERMAL EST subdev 2] [ 2.774328] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.780558] THERMAL EST: thz register success. [ 2.784771] THERMAL EST: end of probe, return err: 0 [ 2.790331] nvsciipc: loaded module [ 2.797367] tun: Universal TUN/TAP device driver, 1.6 [ 2.799642] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.806085] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.811420] e1000e: Intel(R) PRO/1000 Network Driver [ 2.816327] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.822490] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.827971] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.833855] PPP generic driver version 2.4.2 [ 2.838397] PPP BSD Compression module registered [ 2.842939] PPP Deflate Compression module registered [ 2.848182] PPP MPPE Compression module registered [ 2.853192] usbcore: registered new interface driver r8152 [ 2.858700] usbcore: registered new interface driver asix [ 2.863785] usbcore: registered new interface driver ax88179_178a [ 2.869901] usbcore: registered new interface driver cdc_ether [ 2.876108] usbcore: registered new interface driver net1080 [ 2.881450] usbcore: registered new interface driver cdc_subset [ 2.887756] usbcore: registered new interface driver zaurus [ 2.893451] usbcore: registered new interface driver cdc_ncm [ 2.898863] usbcore: registered new interface driver aqc111 [ 2.904531] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.910837] ohci-pci: OHCI PCI platform driver [ 2.914900] ohci-platform: OHCI generic platform driver [ 2.920737] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.927425] usbcore: registered new interface driver uas [ 2.931179] usbcore: registered new interface driver usb-storage [ 2.937554] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.943624] mousedev: PS/2 mouse device common for all mice [ 2.948591] usbcore: registered new interface driver xpad [ 2.956403] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.959382] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.967133] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.973668] i2c /dev entries driver [ 2.976764] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.982596] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.988244] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.993613] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.998587] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.004105] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.009600] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.023133] device-mapper: uevent: version 1.0.3 [ 3.023584] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.030449] cpuidle: Initializing cpuidle driver [ 3.034273] sdhci: Secure Digital Host Controller Interface driver [ 3.038936] sdhci: Copyright(c) Pierre Ossman [ 3.042776] Synopsys Designware Multimedia Card Interface Driver [ 3.049242] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.055237] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.056030] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.068575] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.093045] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.102634] vdd-1v0: supplied by regulator-dummy [ 3.108267] vdd-1v8-hs: supplied by regulator-dummy [ 3.113136] vdd-1v8-ls: supplied by regulator-dummy [ 3.118096] vdd-1v8-ao: supplied by regulator-dummy [ 3.122265] vddio-ddr-1v1: supplied by regulator-dummy [ 3.126886] vdd-rtc: supplied by regulator-dummy [ 3.128692] spmic-ldo1: supplied by regulator-dummy [ 3.130010] vdd-ao-3v3: supplied by regulator-dummy [ 3.136249] vddio-emmc-3v3: supplied by regulator-dummy [ 3.142660] spmic-ldo4: supplied by regulator-dummy [ 3.144010] vdd-usb-3v3: supplied by regulator-dummy [ 3.150299] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.156568] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.162242] spmic-ldo8: supplied by vdd-1v8-ls [ 3.163714] gpio-510 (gpio_default): hogged as output/high [ 3.165063] gpio-511 (gpio_default): hogged as output/high [ 3.167994] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.303851] max77686-rtc max77620-rtc: registered as rtc0 [ 3.304913] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.305244] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.154503] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.155900] hid: raw HID events driver (C) Jiri Kosina [ 4.156766] usbcore: registered new interface driver usbhid [ 4.156929] usbhid: USB HID core driver [ 4.159243] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.160694] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.181287] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.254933] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 74.454 ms) ÿá[ 4.244411] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.244882] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.245847] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.246624] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.248485] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.249353] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.249959] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.251997] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.252289] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.254824] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.261027] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.267392] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.272113] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.278307] denver_knobs_init:MTS_VERSION:55637613 [ 4.290900] t19x_cache tegra-cache: probed [ 4.293991] optee: probing for conduit method. [ 4.294863] optee: revision 3.16 (65cc2218) [ 4.295973] optee: dynamic shared memory is enabled [ 4.299487] optee: initialized driver [ 4.305954] nvpmodel: initialized successfully [ 4.307216] tegra_hv: get_hvd: not initialized yet [ 4.311558] user_ivc_mempool: hypervisor not present [ 4.317778] usbcore: registered new interface driver snd-usb-audio [ 4.323889] u32 classifier [ 4.325281] input device check on [ 4.329157] Actions configured [ 4.332648] Initializing XFRM netlink socket [ 4.337577] NET: Registered protocol family 10 [ 4.344502] Segment Routing with IPv6 [ 4.345144] NET: Registered protocol family 17 [ 4.349196] NET: Registered protocol family 15 [ 4.353852] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.367562] Bluetooth: RFCOMM socket layer initialized [ 4.371914] Bluetooth: RFCOMM ver 1.11 [ 4.376023] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.381584] Bluetooth: HIDP socket layer initialized [ 4.387799] 9pnet: Installing 9P2000 support [ 4.391047] Key type dns_resolver registered [ 4.397455] registered taskstats version 1 [ 4.399710] Loading compiled-in X.509 certificates [ 4.413155] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.415478] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.425349] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.427772] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.436323] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.444376] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.559159] tegra194-pcie 14160000.pcie: Link up [ 4.562393] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.562680] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.562817] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.563148] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.563328] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.563722] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.564188] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.578726] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.579378] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.579917] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.581435] pci 0004:01:00.0: supports D1 D2 [ 4.581645] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.593153] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.593529] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.593908] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.594453] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.594835] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.595228] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.595470] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.601397] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.609687] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.620461] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.625091] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.630700] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.637784] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.646862] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.647587] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.656297] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.664566] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.780004] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.780551] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.780838] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.780996] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.781210] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.781498] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.781862] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.782361] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.804332] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.804702] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.806863] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.808552] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.810242] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.812562] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.813761] pci 0005:00:00.0: Removing from iommu group 7 [ 5.814042] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.850205] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.874142] host1x 13e10000.host1x: initialized [ 5.875838] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.876818] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.877823] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.878744] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.879750] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.880330] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.881387] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.882063] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.882897] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.883549] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.889976] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.897268] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.907109] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.913843] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.924094] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.930905] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.940761] falcon 15340000.vic: Adding to iommu group 17 [ 5.956374] falcon 15340000.vic: initialized [ 5.957363] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.963252] falcon 15380000.nvjpg: initialized [ 5.963833] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.975203] falcon 154c0000.nvenc: initialized [ 5.975747] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.984300] falcon 15a80000.nvenc1: initialized [ 5.984900] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.996456] nvdec 15480000.nvdec: initialized [ 5.997164] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.008406] nvdec 15140000.nvdec1: initialized [ 6.009156] tsec 15500000.tsec: Adding to iommu group 18 [ 6.014776] tsec 15500000.tsec: initialized [ 6.015451] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.021787] tsec 15100000.tsecb: initialized [ 6.026060] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.053309] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.065689] gpio-374 (wifi-enable): hogged as output/high [ 6.065935] gpio-431 (camera-control-output-low): hogged as output/low [ 6.066238] gpio-432 (camera-control-output-low): hogged as output/low [ 6.068014] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.069998] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.070579] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.072574] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.077753] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.083576] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.089449] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.097250] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.104491] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.116235] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.121209] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.127127] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.135930] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.145410] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.152683] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.160283] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.166198] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.176132] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.182333] pva 16000000.pva0: Adding to iommu group 22 [ 6.209237] pva 16000000.pva0: initialized [ 6.213948] pva 16800000.pva1: Adding to iommu group 23 [ 6.234058] pva 16800000.pva1: initialized [ 6.238492] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.252538] nvdla 15880000.nvdla0: initialized [ 6.254311] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.263373] nvdla 158c0000.nvdla1: initialized [ 6.265733] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.266020] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.266470] tegradccommon 15200000.display-hub: dma mapping done [ 6.268613] tegradc 15200000.display: Adding to iommu group 26 [ 6.276975] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.277373] generic_infoframe_type: 0x87 [ 6.277415] random: crng init done [ 6.277608] tegradc 15200000.display: DT parsed successfully [ 6.278412] tegradc 15200000.display: Display dc.0000000073c510c1 registered with id=0 [ 6.280382] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.281663] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.282072] tegradc 15210000.display: Adding to iommu group 26 [ 6.288778] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.295559] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.300404] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.307664] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.307687] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.313568] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.322524] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.329903] tegra_cec 3960000.tegra_cec: probed [ 6.330842] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.335506] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.336980] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.347806] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.355448] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.358202] kfuse 3830000.kfuse: initialized [ 6.369175] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.375496] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.384638] tegradc 15210000.display: disp0 connected to head1->sor [ 6.386245] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.393995] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.400470] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.406346] tegradc 15210000.display: DT parsed successfully [ 6.413537] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.420092] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.449582] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.454910] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.464126] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.469514] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.489599] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.490054] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.492721] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.501271] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.509570] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.516359] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.523807] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.530988] usb usb1: Product: xHCI Host Controller [ 6.536193] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.542488] usb usb1: SerialNumber: 3610000.xhci [ 6.548020] hub 1-0:1.0: USB hub found [ 6.551129] hub 1-0:1.0: 4 ports detected [ 6.555623] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.560215] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.568065] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.575745] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.583639] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.590893] usb usb2: Product: xHCI Host Controller [ 6.595622] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.601823] usb usb2: SerialNumber: 3610000.xhci [ 6.607184] hub 2-0:1.0: USB hub found [ 6.610262] hub 2-0:1.0: 4 ports detected [ 6.650270] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.656638] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.658164] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.658355] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.671504] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.672582] tegra194-cpufreq ccplex: probed with BWMGR [ 6.673857] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.674288] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.674784] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.676283] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.685478] mmc0: CQHCI version 5.10 [ 6.686754] tegra194-vi5 15c10000.vi: initialized [ 6.689299] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.690636] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.694159] generic_infoframe_type: 0x87 [ 6.700668] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.704333] tegradc 15200000.display: DT parsed successfully [ 6.712437] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.717988] tegradc 15200000.display: Display dc.00000000ceae4408 registered with id=0 [ 6.724743] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.724750] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.733719] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.739270] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.747039] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.754233] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.754239] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.754590] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.758274] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.760363] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.760370] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.810739] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.811141] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.817304] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.822997] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.836130] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.841504] nvethernet 2490000.ethernet: Macsec not supported [ 6.842783] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.849146] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.856068] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.873484] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.873732] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.876101] ************************************** [ 6.876105] CPU:0, Error:cbb-noc [ 6.876108] Error Logger : 0 [ 6.876118] ErrLog0 : 0x80030000 [ 6.876124] Transaction Type : RD - Read, Incrementing [ 6.880833] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.888172] Error Code : SLV [ 6.888195] Error Source : Target [ 6.888202] Error Description : Target error detected by CBB slave [ 6.894034] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.896147] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.896152] Packet header Lock : 0 [ 6.896155] Packet header Len1 : 3 [ 6.896158] NOC protocol version : version >= 2.7 [ 6.896160] ErrLog1 : 0x35242a [ 6.896163] ErrLog2 : 0x0 [ 6.896165] RouteId : 0x35242a [ 6.896168] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.896191] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.973753] TargSubRange : 18 [ 6.977420] SeqId : 0 [ 6.980309] ErrLog3 : 0x4045c [ 6.983377] ErrLog4 : 0x0 [ 6.986091] Address accessed : 0x15b4045c [ 6.990565] ErrLog5 : 0xa89f851 [ 6.994222] Non-Modify : 0x1 [ 6.997564] AXI ID : 0x15 [ 7.000696] Master ID : CCPLEX [ 7.003676] Security Group(GRPSEC): 0x7e [ 7.007878] Cache : 0x1 -- Bufferable [ 7.012078] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.018915] FALCONSEC : 0x0 [ 7.022308] Virtual Queuing Channel(VQC): 0x0 [ 7.026948] ************************************** [ 7.031983] ------------[ cut here ]------------ [ 7.036486] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.043049] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.048297] Modules linked in: [ 7.051295] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 7.057670] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.069935] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.076235] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.080678] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.085659] sp : ffff800010003de0 [ 7.089077] x29: ffff800010003de0 x28: 0000000000000001 [ 7.094499] x27: 0000000000000005 x26: ffffb0f427983f58 [ 7.099922] x25: ffffb0f4282dce10 x24: 0000000000000001 [ 7.105347] x23: ffffb0f427c77000 x22: ffffb0f4280fea00 [ 7.110428] x21: 000000000000000f x20: ffff41d640e66e80 [ 7.116197] x19: ffffb0f4280fea00 x18: 0000000000000010 [ 7.121622] x17: 0000001000002000 x16: 0000000000000068 [ 7.126702] x15: ffffb0f427f72bf0 x14: 0720072007200720 [ 7.132471] x13: 0720072007200720 x12: 0720072007200720 [ 7.137985] x11: 0720072007200720 x10: 0720072007200720 [ 7.143503] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.148753] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.154263] x5 : 0000000000057fa8 x4 : ffffb0f427f87968 [ 7.159946] x3 : 00000000ffffffff x2 : ffffb0f42641e090 [ 7.165285] x1 : ffffb0f427f72680 x0 : 0000000100010001 [ 7.170623] Call trace: [ 7.173077] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.177366] __handle_irq_event_percpu+0x68/0x2a0 [ 7.181844] handle_irq_event_percpu+0x40/0xa0 [ 7.186377] handle_irq_event+0x50/0xf0 [ 7.189912] handle_fasteoi_irq+0xc0/0x170 [ 7.193906] generic_handle_irq+0x40/0x60 [ 7.198188] __handle_domain_irq+0x70/0xd0 [ 7.202387] efi_header_end+0xb0/0xf0 [ 7.205886] el1_irq+0xd0/0x180 [ 7.208606] cpuidle_enter_state+0xb8/0x410 [ 7.212804] cpuidle_enter+0x40/0x60 [ 7.216563] call_cpuidle+0x44/0x80 [ 7.219803] do_idle+0x208/0x270 [ 7.223218] cpu_startup_entry+0x2c/0x70 [ 7.227238] rest_init+0xdc/0xe8 [ 7.230235] arch_call_rest_init+0x18/0x20 [ 7.234432] start_kernel+0x514/0x54c [ 7.237749] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.243960] ---[ end trace 5d845510a1583888 ]--- [ 7.248934] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.256461] SMP: stopping secondary CPUs [ 7.260072] Kernel Offset: 0x30f416260000 from 0xffff800010000000 [ 7.266433] PHYS_OFFSET: 0xffffbe2ac0000000 [ 7.270290] CPU features: 0x8240002,03802a30 [ 7.274751] Memory Limit: none [ 7.278178] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 1ÿâclk_dt_late initialized ÿä1ÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä03:ÿâdmce initialized ÿä2ÿâcvc initialized ÿä3:20 UTC 202ÿâavfs_clk_mach_post initialized ÿä2 aaÿâavfs_clk_platform_post initialized ÿärchÿâcvc_late initialized regulator_post initialized ÿä64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.420] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.490] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.745] initializing target [0003.746] calling apps_init() [0003.746] starting app kernel_boot_app [0003.747] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000654] Console: colour dummy device 80x25 [ 0.002071] printk: console [tty0] enabled [ 0.002134] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002169] pid_max: default: 32768 minimum: 301 [ 0.002331] LSM: Security Framework initializing [ 0.002431] Yama: becoming mindful. [ 0.002478] SELinux: Initializing. [ 0.002633] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002688] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005719] rcu: Hierarchical SRCU implementation. [ 0.006022] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006697] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006755] DTB Build time: Aug 10 2022 20:31:49 [ 0.009455] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009706] Remapping and enabling EFI services. [ 0.011571] smp: Bringing up secondary CPUs ... [ 0.041177] Detected PIPT I-cache on CPU1 [ 0.041254] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072889] Detected PIPT I-cache on CPU2 [ 0.073043] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102625] Detected PIPT I-cache on CPU3 [ 0.102767] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132446] Detected PIPT I-cache on CPU4 [ 0.132615] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162410] Detected PIPT I-cache on CPU5 [ 0.162543] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162968] smp: Brought up 1 node, 6 CPUs [ 0.163194] SMP: Total of 6 processors activated. [ 0.163211] CPU features: detected: Privileged Access Never [ 0.163223] CPU features: detected: LSE atomic instructions [ 0.163235] CPU features: detected: User Access Override [ 0.163248] CPU features: detected: 32-bit EL0 Support [ 0.163261] CPU features: detected: RAS Extension Support [ 0.163273] CPU features: detected: CRC32 instructions [ 0.163286] CPU features: detected: 32-bit EL1 Support [ 0.232836] CPU: All CPU(s) started at EL2 [ 0.238838] devtmpfs: initialized [ 0.285927] Registered cp15_barrier emulation handler [ 0.286038] Registered setend emulation handler [ 0.286057] KASLR enabled [ 0.286347] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286370] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287683] pinctrl core: initialized pinctrl subsystem [ 0.288646] SMBIOS 3.0.0 present. [ 0.288676] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289252] NET: Registered protocol family 16 [ 0.291078] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291576] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292322] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292376] audit: initializing netlink subsys (disabled) [ 0.292649] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293053] thermal_sys: Registered thermal governor 'step_wise' [ 0.293059] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293072] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295335] cpuidle: using governor menu [ 0.295667] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296076] ASID allocator initialised with 32768 entries [ 0.296297] Serial: AMBA PL011 UART driver [ 0.299332] Tegra reboot handler registered. [ 0.368899] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.369012] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.369184] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.369228] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.369379] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.369439] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.369570] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.369613] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.369731] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.369773] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.371819] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.371853] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.371882] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.371908] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.371938] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.371964] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.372001] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.372030] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.372060] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.372087] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.372111] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.372134] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.372158] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.372181] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.372204] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.372227] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.372250] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.372338] mc-err: mcerr ops are set to t19x [ 0.384607] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.384633] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.384671] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.384684] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.391239] ACPI: Interpreter disabled. [ 0.392667] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.393979] iommu: Default domain type: Translated [ 0.394046] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.394419] SCSI subsystem initialized [ 0.394568] usbcore: registered new interface driver usbfs [ 0.394606] usbcore: registered new interface driver hub [ 0.394641] usbcore: registered new device driver usb [ 0.395016] mc: Linux media interface: v0.10 [ 0.395048] videodev: Linux video capture interface: v2.00 [ 0.395336] pps_core: LinuxPPS API ver. 1 registered [ 0.395348] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.395383] PTP clock support registered [ 0.395581] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.395916] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.395989] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.396592] Registered efivars operations [ 0.402335] FPGA manager framework [ 0.402440] Advanced Linux Sound Architecture Driver Initialized. [ 0.403050] Bluetooth: Core ver 2.22 [ 0.403091] NET: Registered protocol family 31 [ 0.403102] Bluetooth: HCI device and connection manager initialized [ 0.403117] Bluetooth: HCI socket layer initialized [ 0.403133] Bluetooth: L2CAP socket layer initialized [ 0.403156] Bluetooth: SCO socket layer initialized [ 0.405671] camchar: rtcpu character device driver loaded [ 0.406782] clocksource: Switched to clocksource arch_sys_counter [ 0.810284] VFS: Disk quotas dquot_6.6.0 [ 0.810373] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.810855] pnp: PnP ACPI: disabled [ 0.825026] la/ptsa driver initialized. [ 0.825219] NET: Registered protocol family 2 [ 0.825417] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.833259] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.833377] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.833736] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.834366] TCP: Hash tables configured (established 65536 bind 65536) [ 0.834570] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.834720] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.835030] NET: Registered protocol family 1 [ 0.835726] RPC: Registered named UNIX socket transport module. [ 0.835745] RPC: Registered udp transport module. [ 0.835757] RPC: Registered tcp transport module. [ 0.835774] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.835794] PCI: CLS 0 bytes, default 64 [ 0.836039] Trying to unpack rootfs image as initramfs... [ 1.106641] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.109882] Freeing initrd memory: 8196K [ 1.114380] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.114413] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.114458] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.114936] kvm [1]: IPA Size Limit: 40 bits [ 1.115500] kvm [1]: vgic interrupt IRQ9 [ 1.116024] kvm [1]: VHE mode initialized successfully [ 1.117868] Initialise system trusted keyrings [ 1.118228] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.125094] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.126003] NFS: Registering the id_resolver key type [ 1.126045] Key type id_resolver registered [ 1.126058] Key type id_legacy registered [ 1.126176] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.126199] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.126257] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.137496] NET: Registered protocol family 38 [ 1.137548] Key type asymmetric registered [ 1.137564] Asymmetric key parser 'x509' registered [ 1.137621] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.137842] io scheduler mq-deadline registered [ 1.137859] io scheduler kyber registered [ 1.145140] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.148897] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.148981] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.149052] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.149121] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.149221] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.155982] scrncapt: init (heads:4 wins:6 planes:4) [ 1.156309] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.157405] EINJ: ACPI disabled. [ 1.161178] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.161206] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.161221] tegra-pmc: ### PMC reset level: L1 [ 1.161265] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.161334] tegra-pmc: PMC Prod config success [ 1.167691] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.193030] random: fast init done [ 1.196165] printk: console [ttyTCU0] enabled [ 2.725610] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.729932] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.734513] arm-smmu 10000000.iommu: stage 1 translation [ 2.739876] arm-smmu 10000000.iommu: stage 2 translation [ 2.745632] arm-smmu 10000000.iommu: nested translation [ 2.750580] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.757763] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.767491] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.771393] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.777956] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.785595] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.790737] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.795458] arm-smmu 12000000.iommu: stage 1 translation [ 2.801001] arm-smmu 12000000.iommu: stage 2 translation [ 2.806653] arm-smmu 12000000.iommu: nested translation [ 2.812064] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.819243] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.828556] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.832128] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.838922] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.846111] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.856050] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.859405] tegra_profiler: auth: init [ 2.863388] THERMAL EST: found 3 subdevs [ 2.867042] THERMAL EST num_resources: 0 [ 2.870864] [THERMAL EST subdev 0] [ 2.874166] [THERMAL EST subdev 1] [ 2.877336] [THERMAL EST subdev 2] [ 2.880839] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.887247] THERMAL EST: thz register success. [ 2.891269] THERMAL EST: end of probe, return err: 0 [ 2.896808] nvsciipc: loaded module [ 2.903515] tun: Universal TUN/TAP device driver, 1.6 [ 2.905989] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.912674] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.918234] e1000e: Intel(R) PRO/1000 Network Driver [ 2.922904] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.928954] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.934220] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.940778] PPP generic driver version 2.4.2 [ 2.944704] PPP BSD Compression module registered [ 2.949468] PPP Deflate Compression module registered [ 2.954698] PPP MPPE Compression module registered [ 2.959456] usbcore: registered new interface driver r8152 [ 2.965217] usbcore: registered new interface driver asix [ 2.970297] usbcore: registered new interface driver ax88179_178a [ 2.976675] usbcore: registered new interface driver cdc_ether [ 2.982617] usbcore: registered new interface driver net1080 [ 2.987984] usbcore: registered new interface driver cdc_subset [ 2.994252] usbcore: registered new interface driver zaurus [ 2.999950] usbcore: registered new interface driver cdc_ncm [ 3.005374] usbcore: registered new interface driver aqc111 [ 3.011454] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.017392] ohci-pci: OHCI PCI platform driver [ 3.021411] ohci-platform: OHCI generic platform driver [ 3.027293] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.033766] usbcore: registered new interface driver uas [ 3.037994] usbcore: registered new interface driver usb-storage [ 3.043792] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.049814] mousedev: PS/2 mouse device common for all mice [ 3.055098] usbcore: registered new interface driver xpad [ 3.062835] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.065839] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.073388] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.079842] i2c /dev entries driver [ 3.083488] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.089007] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.094594] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.099753] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.105385] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.110638] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.116275] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.128192] device-mapper: uevent: version 1.0.3 [ 3.128611] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.136475] cpuidle: Initializing cpuidle driver [ 3.140682] sdhci: Secure Digital Host Controller Interface driver [ 3.145446] sdhci: Copyright(c) Pierre Ossman [ 3.149299] Synopsys Designware Multimedia Card Interface Driver [ 3.155723] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.161397] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.167706] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.174743] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.194686] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.203800] vdd-1v0: supplied by regulator-dummy [ 3.209356] vdd-1v8-hs: supplied by regulator-dummy [ 3.214200] vdd-1v8-ls: supplied by regulator-dummy [ 3.218952] vdd-1v8-ao: supplied by regulator-dummy [ 3.222817] vddio-ddr-1v1: supplied by regulator-dummy [ 3.227178] vdd-rtc: supplied by regulator-dummy [ 3.228801] spmic-ldo1: supplied by regulator-dummy [ 3.230022] vdd-ao-3v3: supplied by regulator-dummy [ 3.236129] vddio-emmc-3v3: supplied by regulator-dummy [ 3.242356] spmic-ldo4: supplied by regulator-dummy [ 3.243547] vdd-usb-3v3: supplied by regulator-dummy [ 3.249748] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.255924] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.261425] spmic-ldo8: supplied by vdd-1v8-ls [ 3.262896] gpio-510 (gpio_default): hogged as output/high [ 3.264199] gpio-511 (gpio_default): hogged as output/high [ 3.268568] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.407498] max77686-rtc max77620-rtc: registered as rtc0 [ 3.408725] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.409033] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.130901] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.132085] hid: raw HID events driver (C) Jiri Kosina [ 4.132782] usbcore: registered new interface driver usbhid [ 4.132930] usbhid: USB HID core driver [ 4.134853] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.136216] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.130360] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.205309] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.759 ms) ÿá[ 4.221090] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.221779] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.223263] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.224319] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.226610] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.227546] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.228304] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.230188] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.230567] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.232945] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.237364] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.244493] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.249320] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.257019] denver_knobs_init:MTS_VERSION:55637613 [ 4.268741] t19x_cache tegra-cache: probed [ 4.271680] optee: probing for conduit method. [ 4.272521] optee: revision 3.16 (65cc2218) [ 4.273785] optee: dynamic shared memory is enabled [ 4.276161] optee: initialized driver [ 4.282613] nvpmodel: initialized successfully [ 4.283654] tegra_hv: get_hvd: not initialized yet [ 4.288332] user_ivc_mempool: hypervisor not present [ 4.295319] usbcore: registered new interface driver snd-usb-audio [ 4.300656] u32 classifier [ 4.302011] input device check on [ 4.305908] Actions configured [ 4.309381] Initializing XFRM netlink socket [ 4.314316] NET: Registered protocol family 10 [ 4.321078] Segment Routing with IPv6 [ 4.321595] NET: Registered protocol family 17 [ 4.325728] NET: Registered protocol family 15 [ 4.330398] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.344585] Bluetooth: RFCOMM socket layer initialized [ 4.348541] Bluetooth: RFCOMM ver 1.11 [ 4.352466] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.358305] Bluetooth: HIDP socket layer initialized [ 4.364288] 9pnet: Installing 9P2000 support [ 4.367782] Key type dns_resolver registered [ 4.373338] registered taskstats version 1 [ 4.375931] Loading compiled-in X.509 certificates [ 4.389698] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.392347] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.402721] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.403966] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.412446] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.421049] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.538933] tegra194-pcie 14160000.pcie: Link up [ 4.542031] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.542412] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.542602] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.542902] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.543161] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.543583] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.544072] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.556528] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.557026] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.557454] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.559292] pci 0004:01:00.0: supports D1 D2 [ 4.559572] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.571276] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.571592] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.571925] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.572460] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.572797] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.573056] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.573697] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.581294] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.589469] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.600256] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.604605] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.610210] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.617048] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.627080] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.627569] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.635867] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.644538] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.759749] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.760432] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.760617] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.760862] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.761120] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.761448] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.761857] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.762395] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.782487] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.782957] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.784782] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.786138] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.787780] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.789415] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.790445] pci 0005:00:00.0: Removing from iommu group 7 [ 5.790686] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.829912] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.853874] host1x 13e10000.host1x: initialized [ 5.855722] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.856760] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.858121] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.858956] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.860362] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.860951] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.862134] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.862757] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.864094] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.864788] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.869729] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.877043] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.886974] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.893746] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.903628] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.911007] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.920851] falcon 15340000.vic: Adding to iommu group 17 [ 5.935389] falcon 15340000.vic: initialized [ 5.936792] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.943522] falcon 15380000.nvjpg: initialized [ 5.944252] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.955327] falcon 154c0000.nvenc: initialized [ 5.955934] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.964356] falcon 15a80000.nvenc1: initialized [ 5.965148] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.977382] nvdec 15480000.nvdec: initialized [ 5.978218] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.988685] nvdec 15140000.nvdec1: initialized [ 5.989411] tsec 15500000.tsec: Adding to iommu group 18 [ 5.995761] tsec 15500000.tsec: initialized [ 5.996462] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.003222] tsec 15100000.tsecb: initialized [ 6.008039] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.034670] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.047271] gpio-374 (wifi-enable): hogged as output/high [ 6.047594] gpio-431 (camera-control-output-low): hogged as output/low [ 6.047864] gpio-432 (camera-control-output-low): hogged as output/low [ 6.050128] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.052605] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.053267] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.055014] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.057127] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.063447] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.068896] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.077595] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.084287] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.096256] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.101273] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.107062] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.115921] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.124970] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.132322] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.140255] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.146320] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.155777] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.162138] pva 16000000.pva0: Adding to iommu group 22 [ 6.189088] pva 16000000.pva0: initialized [ 6.194167] pva 16800000.pva1: Adding to iommu group 23 [ 6.206696] pva 16800000.pva1: initialized [ 6.211844] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.225329] nvdla 15880000.nvdla0: initialized [ 6.227005] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.235868] nvdla 158c0000.nvdla1: initialized [ 6.240168] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.240208] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.240263] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.240458] tegradc 15200000.display: Adding to iommu group 26 [ 6.240549] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.241627] tegradccommon 15200000.display-hub: dma mapping done [ 6.242650] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.246657] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.247604] tegradc 15210000.display: Adding to iommu group 26 [ 6.248042] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.249359] generic_infoframe_type: 0x87 [ 6.249475] tegradc 15200000.display: DT parsed successfully [ 6.249567] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.251791] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.259209] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.264005] tegra_cec 3960000.tegra_cec: probed [ 6.267551] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.267560] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.268698] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.274917] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.281667] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.289852] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.297327] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.300697] kfuse 3830000.kfuse: initialized [ 6.313066] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.317324] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.323796] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.328272] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.329010] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.336762] tegradc 15210000.display: disp0 connected to head1->sor [ 6.356582] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.363465] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.371620] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.376846] tegradc 15210000.display: DT parsed successfully [ 6.395769] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.404382] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.441036] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.446413] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.466757] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.467128] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.469771] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.477841] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.486515] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.493425] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.500840] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.508082] usb usb1: Product: xHCI Host Controller [ 6.512793] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.519189] usb usb1: SerialNumber: 3610000.xhci [ 6.524896] hub 1-0:1.0: USB hub found [ 6.527731] hub 1-0:1.0: 4 ports detected [ 6.532825] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.537078] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.544964] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.553086] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.560278] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.567508] usb usb2: Product: xHCI Host Controller [ 6.572717] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.578677] usb usb2: SerialNumber: 3610000.xhci [ 6.584583] hub 2-0:1.0: USB hub found [ 6.587173] hub 2-0:1.0: 4 ports detected [ 6.631036] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.637321] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.639075] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.639278] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.653110] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.654210] tegra194-cpufreq ccplex: probed with BWMGR [ 6.655574] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.656018] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.656494] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.657726] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.664921] tegra194-vi5 15c10000.vi: initialized [ 6.665317] mmc0: CQHCI version 5.10 [ 6.666430] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.667438] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.671308] generic_infoframe_type: 0x87 [ 6.677562] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.681434] tegradc 15200000.display: DT parsed successfully [ 6.689274] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.694817] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.700062] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.701600] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.710038] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.717277] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.724081] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.724091] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.732141] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.738857] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.747430] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.755167] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.755175] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.787974] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.788536] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.794314] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.812340] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.819431] nvethernet 2490000.ethernet: Macsec not supported [ 6.826334] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.826678] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.832459] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.849145] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.849911] tegradc 15200000.display: probed [ 6.853699] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.865306] mmc0: Command Queue Engine enabled [ 6.865313] mmc0: periodic cache flush enabled [ 6.865339] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.869837] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.874580] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.882285] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.887388] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.907574] tegra-se-nvhost 15810000.se: initialized [ 6.911317] Console: switching to colour frame buffer device 240x67 [ 6.916202] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.916683] tegradc 15200000.display: fb registered [ 6.919175] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.923287] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.927584] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.936528] tegra-se-nvhost 15820000.se: initialized [ 6.942985] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.949668] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.952718] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.959094] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.977458] tegra-se-nvhost 15830000.se: initialized [ 6.983029] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.988779] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.994741] tegra-se-nvhost 15840000.se: initialized [ 7.000854] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.006831] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.006953] tegra_actmon d230000.actmon: in actmon_register()... [ 7.013805] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.013817] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.020044] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.021711] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.022786] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.022795] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.023353] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.023357] Extcon AUX1(HDMI) enable [ 7.023508] tegradc 15210000.display: disp1 connected to head1->sor [ 7.023649] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.023706] tegradc 15210000.display: DT parsed successfully [ 7.023744] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.023864] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.023870] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.026919] usb 1-2: Manufacturer: Generic [ 7.028998] hub 1-2:1.0: USB hub found [ 7.030451] tegradc 15210000.display: probed [ 7.031825] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.038452] hub 1-2:1.0: 4 ports detected [ 7.046391] hvc_sysfs: hypervisor is not present [ 7.123658] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.148583] tegradc 15210000.display: fb registered [ 7.151739] ALSA device list: [ 7.156693] No soundcards found. [ 7.156890] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.167192] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.167201] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.180608] tegradc 15210000.display: blank - powerdown [ 7.185802] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.185806] Extcon DP: HPD disabled [ 7.185810] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.185824] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.188693] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.188700] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.188704] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.188708] usb 2-3: Manufacturer: Generic [ 7.194849] Freeing unused kernel memory: 3968K [ 7.197418] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.199505] hub 2-3:1.0: USB hub found [ 7.201356] hub 2-3:1.0: 4 ports detected [ 7.203848] Run /init as init process ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.257705] tegradc 15200000.display: blank - powerdown [ 7.270873] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.305500] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.305505] Extcon AUX1(HDMI) disable [ 7.322820] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.328756] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.329570] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.335421] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.335426] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.342877] tegradc 15200000.display: unblank [ 7.343905] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.344092] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.349731] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.351595] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.355584] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.355588] Extcon AUX1(HDMI) enable [ 7.368373] tegradc 15200000.display: sync windows ret = 247 [ 7.396930] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.398369] Extcon HDMI: HPD enabled [ 7.399758] tegradc 15200000.display: hdmi: plugged [ 7.449664] Root device found: mmcblk0p1 [ 7.453384] Found dev node: /dev/mmcblk0p1 [ 7.472054] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.473551] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.475029] usb 1-3: Product: Bluetooth Radio [ 7.476389] usb 1-3: Manufacturer: Realtek [ 7.477690] usb 1-3: SerialNumber: 00e04c000001 [ 7.490398] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.495826] Rootfs mounted over mmcblk0p1 [ 7.533275] Switching from initrd to actual rootfs [ 7.683764] systemd[1]: System time before build time, advancing clock. [ 7.756259] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.761161] systemd[1]: Detected architecture arm64. [ 7.794579] random: crng init done [ 7.809080] systemd[1]: Set hostname to . [ 7.973779] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.321104] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.322934] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.328572] systemd[1]: Created slice system-modprobe.slice. [ 8.333380] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.337571] systemd[1]: Created slice User and Session Slice. [ 8.341030] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.345372] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.348784] systemd[1]: Reached target User and Group Name Lookups. [ 8.352024] systemd[1]: Reached target Slices. [ 8.355200] systemd[1]: Reached target Swap. [ 8.359370] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.363158] systemd[1]: Listening on Syslog Socket. [ 8.366873] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.370387] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.374699] systemd[1]: Listening on Journal Audit Socket. [ 8.378381] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.383690] systemd[1]: Listening on Journal Socket. [ 8.387949] systemd[1]: Listening on udev Control Socket. [ 8.392138] systemd[1]: Listening on udev Kernel Socket. [ 8.401062] systemd[1]: Mounting Huge Pages File System... [ 8.409673] systemd[1]: Mounting POSIX Message Queue File System... [ 8.417988] systemd[1]: Mounting RPC Pipe File System... [ 8.427185] systemd[1]: Mounting Kernel Debug File System... [ 8.436451] systemd[1]: Mounting Kernel Trace File System... [ 8.446973] systemd[1]: Starting Journal Service... [ 8.456055] systemd[1]: Starting Set the console keyboard layout... [ 8.464638] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.468353] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.475222] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.484237] systemd[1]: Started Nameserver information manager. [ 8.489443] systemd[1]: Reached target Network (Pre). [ 8.496640] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.498534] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.504992] systemd[1]: Starting Load Kernel Modules... [ 8.512898] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.522319] systemd[1]: Starting udev Coldplug all Devices... [ 8.532799] systemd[1]: Mounted Huge Pages File System. [ 8.536836] systemd[1]: Mounted POSIX Message Queue File System. [ 8.541846] systemd[1]: Mounted RPC Pipe File System. [ 8.541909] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.549648] systemd[1]: Mounted Kernel Debug File System. [ 8.551502] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.551998] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.552004] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.552021] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.552025] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.552427] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.552603] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.554074] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.555773] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.567461] systemd[1]: Mounted Kernel Trace File System. [ 8.573616] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.579782] systemd[1]: nvfb-udev.service: Succeeded. [ 8.583924] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.593330] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.598957] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.600758] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.613339] systemd[1]: Starting Load/Save Random Seed... [ 8.621764] systemd[1]: Starting Create System Users... [ 8.669214] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.669214] [ 8.678298] systemd[1]: Finished Load/Save Random Seed. [ 8.685553] systemd[1]: Finished Create System Users. [ 8.701679] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.712157] systemd[1]: Finished Load Kernel Modules. [ 8.716845] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.724017] systemd[1]: Mounting Kernel Configuration File System... [ 8.733259] systemd[1]: Started OP-TEE Client Supplicant. [ 8.741914] systemd[1]: Starting Apply Kernel Variables... [ 8.752210] systemd[1]: Finished Set the console keyboard layout. [ 8.756504] systemd[1]: Mounted Kernel Configuration File System. [ 8.763305] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.769946] systemd[1]: Reached target Local File Systems (Pre). [ 8.774493] systemd[1]: Reached target Local File Systems. [ 10.245465] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.250663] imx219 9-0010: board setup failed [ 10.252194] imx219: probe of 9-0010 failed with error -121 [ 10.263343] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.274249] imx219 10-0010: board setup failed [ 10.275794] imx219: probe of 10-0010 failed with error -121 [ 10.487652] hot-surface-alert cooling state: 0 -> 1 [ 10.640827] using random self ethernet address [ 10.650957] using random host ethernet address [ 12.056694] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.057977] Creating 1 MTD partitions on "spi6.0": [ 12.059826] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.440965] using random self ethernet address [ 12.442188] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.821885] nvidia: loading out-of-tree module taints kernel. [ 57.804707] watchdog: watchdog0: watchdog did not stop! [ 58.252667] Trying to unregister non-registered hwtime source [ 61.309804] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.311433] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized ÿä1ÿânoc_late initialized pm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 aÿâavfs_clk_platform_post initialized ÿäarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.619] E> invalid display type [0003.620] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.649] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.650] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.723] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.750] calling apps_init() [0003.750] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000655] Console: colour dummy device 80x25 [ 0.002179] printk: console [tty0] enabled [ 0.002247] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002284] pid_max: default: 32768 minimum: 301 [ 0.002476] LSM: Security Framework initializing [ 0.002571] Yama: becoming mindful. [ 0.002633] SELinux: Initializing. [ 0.002795] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002834] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005721] rcu: Hierarchical SRCU implementation. [ 0.005982] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006686] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006763] DTB Build time: Aug 10 2022 20:31:49 [ 0.009545] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009801] Remapping and enabling EFI services. [ 0.011732] smp: Bringing up secondary CPUs ... [ 0.041124] Detected PIPT I-cache on CPU1 [ 0.041183] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073256] Detected PIPT I-cache on CPU2 [ 0.073334] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102871] Detected PIPT I-cache on CPU3 [ 0.102937] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132557] Detected PIPT I-cache on CPU4 [ 0.132636] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162282] Detected PIPT I-cache on CPU5 [ 0.162350] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162710] smp: Brought up 1 node, 6 CPUs [ 0.162932] SMP: Total of 6 processors activated. [ 0.162971] CPU features: detected: Privileged Access Never [ 0.162992] CPU features: detected: LSE atomic instructions [ 0.163021] CPU features: detected: User Access Override [ 0.163035] CPU features: detected: 32-bit EL0 Support [ 0.163046] CPU features: detected: RAS Extension Support [ 0.163059] CPU features: detected: CRC32 instructions [ 0.163070] CPU features: detected: 32-bit EL1 Support [ 0.229416] CPU: All CPU(s) started at EL2 [ 0.235392] devtmpfs: initialized [ 0.284237] Registered cp15_barrier emulation handler [ 0.284361] Registered setend emulation handler [ 0.284382] KASLR enabled [ 0.284587] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.284612] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.285805] pinctrl core: initialized pinctrl subsystem [ 0.286768] SMBIOS 3.0.0 present. [ 0.286808] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.287526] NET: Registered protocol family 16 [ 0.289357] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.289906] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.290608] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.290672] audit: initializing netlink subsys (disabled) [ 0.290970] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.291307] thermal_sys: Registered thermal governor 'step_wise' [ 0.291313] thermal_sys: Registered thermal governor 'power_allocator' [ 0.291329] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.293394] cpuidle: using governor menu [ 0.293678] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.294195] ASID allocator initialised with 32768 entries [ 0.294452] Serial: AMBA PL011 UART driver [ 0.297669] Tegra reboot handler registered. [ 0.363988] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.364142] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.364342] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.364397] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.364522] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.364572] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.364687] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.364736] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.364896] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.364945] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.367222] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.367264] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.367300] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.367332] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.367364] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.367414] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.367455] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.367511] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.367540] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.367572] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.367619] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.367647] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.367675] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.367702] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.367729] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.367756] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.367783] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.367884] mc-err: mcerr ops are set to t19x [ 0.378846] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.378868] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.378880] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.378891] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.385627] ACPI: Interpreter disabled. [ 0.387283] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.388961] iommu: Default domain type: Translated [ 0.389057] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.389598] SCSI subsystem initialized [ 0.389789] usbcore: registered new interface driver usbfs [ 0.389846] usbcore: registered new interface driver hub [ 0.389901] usbcore: registered new device driver usb [ 0.390482] mc: Linux media interface: v0.10 [ 0.390523] videodev: Linux video capture interface: v2.00 [ 0.390932] pps_core: LinuxPPS API ver. 1 registered [ 0.390950] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.390978] PTP clock support registered [ 0.391265] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.391723] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.391851] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.392664] Registered efivars operations [ 0.401084] FPGA manager framework [ 0.401228] Advanced Linux Sound Architecture Driver Initialized. [ 0.401809] Bluetooth: Core ver 2.22 [ 0.401851] NET: Registered protocol family 31 [ 0.401863] Bluetooth: HCI device and connection manager initialized [ 0.401878] Bluetooth: HCI socket layer initialized [ 0.401909] Bluetooth: L2CAP socket layer initialized [ 0.401930] Bluetooth: SCO socket layer initialized [ 0.403277] camchar: rtcpu character device driver loaded [ 0.403919] clocksource: Switched to clocksource arch_sys_counter [ 0.694441] VFS: Disk quotas dquot_6.6.0 [ 0.694513] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.694810] pnp: PnP ACPI: disabled [ 0.704755] la/ptsa driver initialized. [ 0.704896] NET: Registered protocol family 2 [ 0.705070] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.710524] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.710596] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.710886] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.711325] TCP: Hash tables configured (established 65536 bind 65536) [ 0.711450] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.711538] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.711753] NET: Registered protocol family 1 [ 0.712746] RPC: Registered named UNIX socket transport module. [ 0.712790] RPC: Registered udp transport module. [ 0.712809] RPC: Registered tcp transport module. [ 0.712828] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.712857] PCI: CLS 0 bytes, default 64 [ 0.713159] Trying to unpack rootfs image as initramfs... [ 0.908592] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.910578] Freeing initrd memory: 8196K [ 0.914186] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.914255] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.914316] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.914714] kvm [1]: IPA Size Limit: 40 bits [ 0.915205] kvm [1]: vgic interrupt IRQ9 [ 0.915689] kvm [1]: VHE mode initialized successfully [ 0.916853] Initialise system trusted keyrings [ 0.917093] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.921412] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.922064] NFS: Registering the id_resolver key type [ 0.922092] Key type id_resolver registered [ 0.922128] Key type id_legacy registered [ 0.922217] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.922242] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.922275] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.929598] NET: Registered protocol family 38 [ 0.929622] Key type asymmetric registered [ 0.929636] Asymmetric key parser 'x509' registered [ 0.929676] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.929896] io scheduler mq-deadline registered [ 0.929912] io scheduler kyber registered [ 0.934015] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.936447] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.936515] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.936594] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.936653] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.936709] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.940751] scrncapt: init (heads:4 wins:6 planes:4) [ 0.941177] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.941789] EINJ: ACPI disabled. [ 0.944222] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.944245] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.944255] tegra-pmc: ### PMC reset level: L1 [ 0.944264] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.944304] tegra-pmc: PMC Prod config success [ 0.948094] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.952353] random: fast init done [ 0.952384] printk: console [ttyTCU0] enabled [ 2.505192] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.509282] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.513903] arm-smmu 10000000.iommu: stage 1 translation [ 2.519685] arm-smmu 10000000.iommu: stage 2 translation [ 2.525112] arm-smmu 10000000.iommu: nested translation [ 2.530228] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.537654] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.548193] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.550725] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.557322] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.565347] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.570352] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.575121] arm-smmu 12000000.iommu: stage 1 translation [ 2.580329] arm-smmu 12000000.iommu: stage 2 translation [ 2.585762] arm-smmu 12000000.iommu: nested translation [ 2.591441] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.598622] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.609084] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.611453] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.618323] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.625572] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.635425] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.638706] tegra_profiler: auth: init [ 2.642974] THERMAL EST: found 3 subdevs [ 2.646139] THERMAL EST num_resources: 0 [ 2.650234] [THERMAL EST subdev 0] [ 2.653558] [THERMAL EST subdev 1] [ 2.656712] [THERMAL EST subdev 2] [ 2.660218] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.666382] THERMAL EST: thz register success. [ 2.670920] THERMAL EST: end of probe, return err: 0 [ 2.676226] nvsciipc: loaded module [ 2.683633] tun: Universal TUN/TAP device driver, 1.6 [ 2.685998] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.691732] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.697310] e1000e: Intel(R) PRO/1000 Network Driver [ 2.702470] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.708542] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.713845] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.719807] PPP generic driver version 2.4.2 [ 2.724070] PPP BSD Compression module registered [ 2.728818] PPP Deflate Compression module registered [ 2.734096] PPP MPPE Compression module registered [ 2.738864] usbcore: registered new interface driver r8152 [ 2.744336] usbcore: registered new interface driver asix [ 2.749923] usbcore: registered new interface driver ax88179_178a [ 2.755796] usbcore: registered new interface driver cdc_ether [ 2.762004] usbcore: registered new interface driver net1080 [ 2.767338] usbcore: registered new interface driver cdc_subset [ 2.773646] usbcore: registered new interface driver zaurus [ 2.779332] usbcore: registered new interface driver cdc_ncm [ 2.784757] usbcore: registered new interface driver aqc111 [ 2.790397] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.796482] ohci-pci: OHCI PCI platform driver [ 2.801023] ohci-platform: OHCI generic platform driver [ 2.806691] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.813014] usbcore: registered new interface driver uas [ 2.817317] usbcore: registered new interface driver usb-storage [ 2.823273] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.829236] mousedev: PS/2 mouse device common for all mice [ 2.834224] usbcore: registered new interface driver xpad [ 2.842447] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.845226] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.853020] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.859385] i2c /dev entries driver [ 2.862903] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.868409] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.874060] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.879447] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.884751] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.890002] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.895695] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.909114] device-mapper: uevent: version 1.0.3 [ 2.909550] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.916217] cpuidle: Initializing cpuidle driver [ 2.919874] sdhci: Secure Digital Host Controller Interface driver [ 2.924826] sdhci: Copyright(c) Pierre Ossman [ 2.928670] Synopsys Designware Multimedia Card Interface Driver [ 2.935132] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.941149] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.941986] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.954167] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.977849] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.987794] vdd-1v0: supplied by regulator-dummy [ 2.993362] vdd-1v8-hs: supplied by regulator-dummy [ 2.998242] vdd-1v8-ls: supplied by regulator-dummy [ 3.003056] vdd-1v8-ao: supplied by regulator-dummy [ 3.007045] vddio-ddr-1v1: supplied by regulator-dummy [ 3.011506] vdd-rtc: supplied by regulator-dummy [ 3.013361] spmic-ldo1: supplied by regulator-dummy [ 3.014641] vdd-ao-3v3: supplied by regulator-dummy [ 3.020796] vddio-emmc-3v3: supplied by regulator-dummy [ 3.027189] spmic-ldo4: supplied by regulator-dummy [ 3.028496] vdd-usb-3v3: supplied by regulator-dummy [ 3.034812] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.041156] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.046795] spmic-ldo8: supplied by vdd-1v8-ls [ 3.048263] gpio-510 (gpio_default): hogged as output/high [ 3.049706] gpio-511 (gpio_default): hogged as output/high [ 3.052652] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.188526] max77686-rtc max77620-rtc: registered as rtc0 [ 3.189609] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.189930] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.042989] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.044451] hid: raw HID events driver (C) Jiri Kosina [ 4.045265] usbcore: registered new interface driver usbhid [ 4.045399] usbhid: USB HID core driver [ 4.047656] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.048986] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.020022] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.094073] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 74.859 ms) ÿá[ 4.133477] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.134032] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.135116] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.135904] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.137650] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.138238] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.138759] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.140018] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.140233] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.142422] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.143159] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.156233] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.162217] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.167386] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.174757] denver_knobs_init:MTS_VERSION:55637613 [ 4.189834] t19x_cache tegra-cache: probed [ 4.195227] optee: probing for conduit method. [ 4.196327] optee: revision 3.16 (65cc2218) [ 4.197725] optee: dynamic shared memory is enabled [ 4.198902] optee: initialized driver [ 4.203470] nvpmodel: initialized successfully [ 4.204091] tegra_hv: get_hvd: not initialized yet [ 4.206660] user_ivc_mempool: hypervisor not present [ 4.213419] usbcore: registered new interface driver snd-usb-audio [ 4.219367] u32 classifier [ 4.220790] input device check on [ 4.224367] Actions configured [ 4.228012] Initializing XFRM netlink socket [ 4.232882] NET: Registered protocol family 10 [ 4.240305] Segment Routing with IPv6 [ 4.240746] NET: Registered protocol family 17 [ 4.244795] NET: Registered protocol family 15 [ 4.248961] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.262845] Bluetooth: RFCOMM socket layer initialized [ 4.267464] Bluetooth: RFCOMM ver 1.11 [ 4.271388] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.276997] Bluetooth: HIDP socket layer initialized [ 4.283272] 9pnet: Installing 9P2000 support [ 4.286394] Key type dns_resolver registered [ 4.292117] registered taskstats version 1 [ 4.294784] Loading compiled-in X.509 certificates [ 4.308822] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.310609] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.321438] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.322744] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.331641] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.339692] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.456026] tegra194-pcie 14160000.pcie: Link up [ 4.459187] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.459382] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.459588] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.459820] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.460066] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.460430] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.460916] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.474295] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.474794] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.475276] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.477057] pci 0004:01:00.0: supports D1 D2 [ 4.477191] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.490458] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.490876] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.491079] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.491429] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.491751] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.492083] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.492278] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.498336] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.506544] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.516940] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.521995] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.527270] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.534073] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.543765] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.544536] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.553221] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.561423] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.676849] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.677382] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.677562] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.677697] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.678036] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.678248] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.678761] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.679229] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.703716] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.704270] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.706415] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.708422] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.710336] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.712150] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.713426] pci 0005:00:00.0: Removing from iommu group 7 [ 5.713705] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.755889] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.783343] host1x 13e10000.host1x: initialized [ 5.785547] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.786511] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.788097] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.788902] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.790251] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.790891] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.792414] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.793167] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.794152] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.794829] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.795805] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.796693] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.804044] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.811207] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.821482] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.828214] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.837810] falcon 15340000.vic: Adding to iommu group 17 [ 5.852670] falcon 15340000.vic: initialized [ 5.853639] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.859594] falcon 15380000.nvjpg: initialized [ 5.860179] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.871350] falcon 154c0000.nvenc: initialized [ 5.872131] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.880845] falcon 15a80000.nvenc1: initialized [ 5.881506] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.894757] nvdec 15480000.nvdec: initialized [ 5.895290] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.905021] nvdec 15140000.nvdec1: initialized [ 5.905708] tsec 15500000.tsec: Adding to iommu group 18 [ 5.911591] tsec 15500000.tsec: initialized [ 5.912248] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.918323] tsec 15100000.tsecb: initialized [ 5.922421] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.952853] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.966972] gpio-374 (wifi-enable): hogged as output/high [ 5.967248] gpio-431 (camera-control-output-low): hogged as output/low [ 5.967638] gpio-432 (camera-control-output-low): hogged as output/low [ 5.969747] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.972395] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.973011] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.974783] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.976231] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.980499] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.986085] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.994287] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.001565] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.013183] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.018407] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.023971] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.032767] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.042214] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.049721] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.056976] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.063372] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.072800] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.079322] pva 16000000.pva0: Adding to iommu group 22 [ 6.106375] pva 16000000.pva0: initialized [ 6.111448] pva 16800000.pva1: Adding to iommu group 23 [ 6.123548] pva 16800000.pva1: initialized [ 6.128719] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.143329] nvdla 15880000.nvdla0: initialized [ 6.144841] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.153842] nvdla 158c0000.nvdla1: initialized [ 6.158874] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.159157] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.159982] tegradc 15210000.display: Adding to iommu group 26 [ 6.160123] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.160322] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.160808] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.161195] tegradccommon 15200000.display-hub: dma mapping done [ 6.161818] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.168767] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.168825] tegradc 15210000.display: disp0 connected to head1->sor [ 6.169015] tegradc 15200000.display: Adding to iommu group 26 [ 6.174355] tegra_cec 3960000.tegra_cec: probed [ 6.175325] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.180713] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.189058] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.191375] tegradc 15210000.display: DT parsed successfully [ 6.197443] kfuse 3830000.kfuse: initialized [ 6.204054] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.205048] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.211738] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.217062] generic_infoframe_type: 0x87 [ 6.220798] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.221461] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.228684] tegradc 15200000.display: DT parsed successfully [ 6.245588] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.252434] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.259816] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.267629] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.273877] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.280790] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.280798] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.281820] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.289299] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.294726] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.296409] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.319836] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.329905] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.367339] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.374351] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.381415] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.386672] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.395347] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.403821] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.410682] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.418103] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.425299] usb usb1: Product: xHCI Host Controller [ 6.429995] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.436231] usb usb1: SerialNumber: 3610000.xhci [ 6.442008] hub 1-0:1.0: USB hub found [ 6.444786] hub 1-0:1.0: 4 ports detected [ 6.449397] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.454422] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.461759] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.469530] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.476648] random: crng init done [ 6.477591] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.488246] usb usb2: Product: xHCI Host Controller [ 6.492912] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.499113] usb usb2: SerialNumber: 3610000.xhci [ 6.504562] hub 2-0:1.0: USB hub found [ 6.507524] hub 2-0:1.0: 4 ports detected [ 6.553958] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.561996] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.563821] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.564257] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.578174] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.579374] tegra194-cpufreq ccplex: probed with BWMGR [ 6.580702] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.581283] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.581755] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.582915] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.590428] tegra194-vi5 15c10000.vi: initialized [ 6.590752] mmc0: CQHCI version 5.10 [ 6.591962] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.592206] generic_infoframe_type: 0x87 [ 6.592879] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.595652] tegradc 15200000.display: DT parsed successfully [ 6.601898] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.607479] tegradc 15200000.display: Display dc.00000000e3440b29 registered with id=0 [ 6.615311] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.629869] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.636769] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.643312] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.650796] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.655978] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.657985] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.663935] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.664659] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.672762] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.687040] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.694970] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.701115] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.709322] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.711953] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.714553] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.729961] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.739383] nvethernet 2490000.ethernet: Macsec not supported [ 6.752761] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.761908] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.763980] tegradc 15200000.display: probed [ 6.769513] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.778468] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.785990] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.793918] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.800295] tegra-se-nvhost 15810000.se: initialized [ 6.808911] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.810216] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.817691] tegra-se-nvhost 15820000.se: initialized [ 6.821947] mmc0: Command Queue Engine enabled [ 6.823364] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.825631] mmc0: periodic cache flush enabled [ 6.825645] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.826168] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.832488] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.836280] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.860845] Console: switching to colour frame buffer device 240x67 [ 6.866707] tegradc 15200000.display: fb registered [ 6.871720] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.871744] tegra-se-nvhost 15830000.se: initialized [ 6.878304] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.883269] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.886799] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.886825] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.886831] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.886835] usb 1-2: Manufacturer: Generic [ 6.887796] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.888305] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.894925] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.902950] hub 1-2:1.0: USB hub found [ 6.943189] tegra-se-nvhost 15840000.se: initialized [ 6.944000] hub 1-2:1.0: 4 ports detected [ 6.949617] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.959793] tegra_actmon d230000.actmon: in actmon_register()... [ 6.964143] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.969926] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.978149] hvc_sysfs: hypervisor is not present [ 7.012144] ALSA device list: [ 7.012268] No soundcards found. [ 7.015372] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.016723] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.016870] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.016929] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.017713] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.027322] Extcon AUX1(HDMI) enable [ 7.031458] tegradc 15210000.display: disp1 connected to head1->sor [ 7.037496] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.044677] tegradc 15210000.display: DT parsed successfully [ 7.050285] tegradc 15210000.display: Display dc.00000000eb34b67c registered with id=1 [ 7.057595] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.058357] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.066546] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.072743] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.080342] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.091026] usb 2-3: Manufacturer: Generic [ 7.093669] tegradc 15210000.display: probed [ 7.100053] tegradc 15210000.display: fb registered [ 7.107873] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.112213] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.114168] Freeing unused kernel memory: 3968K [ 7.120099] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.130007] tegradc 15210000.display: blank - powerdown [ 7.132162] Run /init as init process [ 7.135155] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.135211] hub 2-3:1.0: USB hub found [ 7.138808] hub 2-3:1.0: 4 ports detected [ 7.146794] Extcon DP: HPD disabled [ 7.158506] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.165023] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.171051] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.179962] usb 1-3: new full-speed USB device number 3 using tegra-xusb ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.198175] tegradc 15200000.display: blank - powerdown [ 7.199994] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.211594] Root device found: mmcblk0p1 [ 7.213669] Found dev node: /dev/mmcblk0p1 [ 7.232468] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.232474] Extcon AUX1(HDMI) disable [ 7.249602] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.254037] Rootfs mounted over mmcblk0p1 [ 7.255839] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.256691] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.264554] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.264561] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.270044] tegradc 15200000.display: unblank [ 7.271324] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.271518] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.277785] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.279649] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.284003] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.284007] Extcon AUX1(HDMI) enable [ 7.291855] Switching from initrd to actual rootfs [ 7.296443] tegradc 15200000.display: sync windows ret = 247 [ 7.332330] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.334879] Extcon HDMI: HPD enabled [ 7.337154] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.338313] tegradc 15200000.display: hdmi: plugged [ 7.352046] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.359294] usb 1-3: Product: Bluetooth Radio [ 7.363775] usb 1-3: Manufacturer: Realtek [ 7.367826] usb 1-3: SerialNumber: 00e04c000001 [ 7.467568] systemd[1]: System time before build time, advancing clock. [ 7.538410] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.543384] systemd[1]: Detected architecture arm64. [ 7.588450] systemd[1]: Set hostname to . [ 7.756483] systemd-sysv-generator[240]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.103227] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.105017] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.110668] systemd[1]: Created slice system-modprobe.slice. [ 8.115229] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.119554] systemd[1]: Created slice User and Session Slice. [ 8.123058] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.127261] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.130781] systemd[1]: Reached target User and Group Name Lookups. [ 8.134046] systemd[1]: Reached target Slices. [ 8.137210] systemd[1]: Reached target Swap. [ 8.141244] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.144961] systemd[1]: Listening on Syslog Socket. [ 8.148636] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.152064] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.156427] systemd[1]: Listening on Journal Audit Socket. [ 8.160153] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.164101] systemd[1]: Listening on Journal Socket. [ 8.167902] systemd[1]: Listening on udev Control Socket. [ 8.171505] systemd[1]: Listening on udev Kernel Socket. [ 8.179862] systemd[1]: Mounting Huge Pages File System... [ 8.188506] systemd[1]: Mounting POSIX Message Queue File System... [ 8.199887] systemd[1]: Mounting RPC Pipe File System... [ 8.208811] systemd[1]: Mounting Kernel Debug File System... [ 8.217687] systemd[1]: Mounting Kernel Trace File System... [ 8.228120] systemd[1]: Starting Journal Service... [ 8.237282] systemd[1]: Starting Set the console keyboard layout... [ 8.245505] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.249174] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.255682] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.263710] systemd[1]: Started Nameserver information manager. [ 8.268760] systemd[1]: Reached target Network (Pre). [ 8.276239] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.278105] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.284603] systemd[1]: Starting Load Kernel Modules... [ 8.292580] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.300594] systemd[1]: Starting udev Coldplug all Devices... [ 8.312520] systemd[1]: Mounted Huge Pages File System. [ 8.316316] systemd[1]: Mounted POSIX Message Queue File System. [ 8.320312] systemd[1]: Mounted RPC Pipe File System. [ 8.321477] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.328267] systemd[1]: Mounted Kernel Debug File System. [ 8.329280] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.332375] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.332384] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.332393] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.332397] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.332607] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.332817] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.332969] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.332978] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.347379] systemd[1]: Mounted Kernel Trace File System. [ 8.353600] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.358290] systemd[1]: nvfb-udev.service: Succeeded. [ 8.362324] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.373959] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.386985] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.388837] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.395901] systemd[1]: Starting Load/Save Random Seed... [ 8.404512] systemd[1]: Starting Create System Users... [ 8.426523] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.426523] [ 8.460734] systemd[1]: Finished Load/Save Random Seed. [ 8.467457] systemd[1]: Finished Load Kernel Modules. [ 8.472302] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.479332] systemd[1]: Mounting Kernel Configuration File System... [ 8.488417] systemd[1]: Started OP-TEE Client Supplicant. [ 8.497000] systemd[1]: Starting Apply Kernel Variables... [ 8.507753] systemd[1]: Finished Set the console keyboard layout. [ 8.512244] systemd[1]: Mounted Kernel Configuration File System. [ 8.523639] systemd[1]: Finished Create System Users. [ 10.044876] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.051318] imx219 9-0010: board setup failed [ 10.052650] imx219: probe of 9-0010 failed with error -121 [ 10.083373] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.096933] imx219 10-0010: board setup failed [ 10.104926] imx219: probe of 10-0010 failed with error -121 [ 10.214304] hot-surface-alert cooling state: 0 -> 1 [ 10.972606] using random self ethernet address [ 10.972612] using random host ethernet address [ 11.715151] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.716876] Creating 1 MTD partitions on "spi6.0": [ 11.718541] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.334711] using random self ethernet address [ 12.335869] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.831624] nvidia: loading out-of-tree module taints kernel. [ 29.556032] tegradc 15200000.display: sor_poll_register 0x16: timeout [ 29.556045] tegradc 15200000.display: dc timeout waiting for HEAD MODE = SLEEP [ 59.733929] watchdog: watchdog0: watchdog did not stop! [ 60.217471] Trying to unregister non-registered hwtime source [ 63.274722] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.276312] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [Åÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.645] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.745] calling apps_init() [0003.746] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000711] Console: colour dummy device 80x25 [ 0.002267] printk: console [tty0] enabled [ 0.002345] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002387] pid_max: default: 32768 minimum: 301 [ 0.002616] LSM: Security Framework initializing [ 0.002689] Yama: becoming mindful. [ 0.002732] SELinux: Initializing. [ 0.002921] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002962] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006236] rcu: Hierarchical SRCU implementation. [ 0.006495] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007238] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007287] DTB Build time: Aug 10 2022 20:31:49 [ 0.010376] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010653] Remapping and enabling EFI services. [ 0.012798] smp: Bringing up secondary CPUs ... [ 0.042093] Detected PIPT I-cache on CPU1 [ 0.042174] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071795] Detected PIPT I-cache on CPU2 [ 0.071893] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101502] Detected PIPT I-cache on CPU3 [ 0.101649] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131453] Detected PIPT I-cache on CPU4 [ 0.131558] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161238] Detected PIPT I-cache on CPU5 [ 0.161310] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161637] smp: Brought up 1 node, 6 CPUs [ 0.161913] SMP: Total of 6 processors activated. [ 0.161932] CPU features: detected: Privileged Access Never [ 0.161947] CPU features: detected: LSE atomic instructions [ 0.161979] CPU features: detected: User Access Override [ 0.161993] CPU features: detected: 32-bit EL0 Support [ 0.162007] CPU features: detected: RAS Extension Support [ 0.162020] CPU features: detected: CRC32 instructions [ 0.162034] CPU features: detected: 32-bit EL1 Support [ 0.226513] CPU: All CPU(s) started at EL2 [ 0.231893] devtmpfs: initialized [ 0.278426] Registered cp15_barrier emulation handler [ 0.278522] Registered setend emulation handler [ 0.278546] KASLR enabled [ 0.278808] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.278837] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.280365] pinctrl core: initialized pinctrl subsystem [ 0.281515] SMBIOS 3.0.0 present. [ 0.281546] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.282272] NET: Registered protocol family 16 [ 0.284075] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.284592] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.285311] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.285393] audit: initializing netlink subsys (disabled) [ 0.285786] audit: type=2000 audit(0.280:1): state=initialized audit_enabled=0 res=1 [ 0.286169] thermal_sys: Registered thermal governor 'step_wise' [ 0.286176] thermal_sys: Registered thermal governor 'power_allocator' [ 0.286193] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.288276] cpuidle: using governor menu [ 0.288585] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.289024] ASID allocator initialised with 32768 entries [ 0.289268] Serial: AMBA PL011 UART driver [ 0.292637] Tegra reboot handler registered. [ 0.358925] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.359074] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.359253] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.359324] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.359473] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.359539] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.359655] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.359701] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.359817] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.359863] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.362523] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.362561] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.362592] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.362626] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.362680] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.362710] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.362748] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.362799] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.362825] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.362866] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.362892] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.362918] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.362944] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.362969] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.362995] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.363020] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.363045] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.363138] mc-err: mcerr ops are set to t19x [ 0.374614] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.374640] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.374652] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.374663] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.381119] ACPI: Interpreter disabled. [ 0.382259] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.383659] iommu: Default domain type: Translated [ 0.383735] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.384115] SCSI subsystem initialized [ 0.384258] usbcore: registered new interface driver usbfs [ 0.384299] usbcore: registered new interface driver hub [ 0.384354] usbcore: registered new device driver usb [ 0.384793] mc: Linux media interface: v0.10 [ 0.384823] videodev: Linux video capture interface: v2.00 [ 0.385110] pps_core: LinuxPPS API ver. 1 registered [ 0.385121] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.385141] PTP clock support registered [ 0.385337] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.385668] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.385773] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.386404] Registered efivars operations [ 0.392443] FPGA manager framework [ 0.392552] Advanced Linux Sound Architecture Driver Initialized. [ 0.393110] Bluetooth: Core ver 2.22 [ 0.393147] NET: Registered protocol family 31 [ 0.393160] Bluetooth: HCI device and connection manager initialized [ 0.393177] Bluetooth: HCI socket layer initialized [ 0.393194] Bluetooth: L2CAP socket layer initialized [ 0.393216] Bluetooth: SCO socket layer initialized [ 0.394820] camchar: rtcpu character device driver loaded [ 0.395519] clocksource: Switched to clocksource arch_sys_counter [ 0.688707] VFS: Disk quotas dquot_6.6.0 [ 0.688795] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.689112] pnp: PnP ACPI: disabled [ 0.700669] la/ptsa driver initialized. [ 0.700817] NET: Registered protocol family 2 [ 0.701012] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.706812] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.706888] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.707201] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.707662] TCP: Hash tables configured (established 65536 bind 65536) [ 0.707789] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.707883] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.708086] NET: Registered protocol family 1 [ 0.709038] RPC: Registered named UNIX socket transport module. [ 0.709072] RPC: Registered udp transport module. [ 0.709093] RPC: Registered tcp transport module. [ 0.709127] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.709161] PCI: CLS 0 bytes, default 64 [ 0.709436] Trying to unpack rootfs image as initramfs... [ 0.979156] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.982176] Freeing initrd memory: 8196K [ 0.986254] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.986295] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.986338] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.986619] kvm [1]: IPA Size Limit: 40 bits [ 0.987142] kvm [1]: vgic interrupt IRQ9 [ 0.987730] kvm [1]: VHE mode initialized successfully [ 0.989112] Initialise system trusted keyrings [ 0.989465] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.994813] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.995712] NFS: Registering the id_resolver key type [ 0.995751] Key type id_resolver registered [ 0.995764] Key type id_legacy registered [ 0.995847] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.995871] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.995906] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.005872] NET: Registered protocol family 38 [ 1.005898] Key type asymmetric registered [ 1.005941] Asymmetric key parser 'x509' registered [ 1.005989] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.006310] io scheduler mq-deadline registered [ 1.006332] io scheduler kyber registered [ 1.011705] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.014528] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.014607] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.014680] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.014750] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.014821] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.020021] scrncapt: init (heads:4 wins:6 planes:4) [ 1.020295] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.021185] EINJ: ACPI disabled. [ 1.024384] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.024409] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.024423] tegra-pmc: ### PMC reset level: L1 [ 1.024436] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.024490] tegra-pmc: PMC Prod config success [ 1.029583] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.049626] random: fast init done [ 1.058004] printk: console [ttyTCU0] enabled [ 2.587136] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.591826] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.596137] arm-smmu 10000000.iommu: stage 1 translation [ 2.601547] arm-smmu 10000000.iommu: stage 2 translation [ 2.607053] arm-smmu 10000000.iommu: nested translation [ 2.612663] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.619571] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.629108] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.632713] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.639521] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.647065] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.652580] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.657277] arm-smmu 12000000.iommu: stage 1 translation [ 2.662784] arm-smmu 12000000.iommu: stage 2 translation [ 2.668210] arm-smmu 12000000.iommu: nested translation [ 2.673637] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.680555] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.690022] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.693952] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.700501] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.707882] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.717423] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.720674] tegra_profiler: auth: init [ 2.724903] THERMAL EST: found 3 subdevs [ 2.728610] THERMAL EST num_resources: 0 [ 2.732177] [THERMAL EST subdev 0] [ 2.735756] [THERMAL EST subdev 1] [ 2.738901] [THERMAL EST subdev 2] [ 2.742414] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.748563] THERMAL EST: thz register success. [ 2.753102] THERMAL EST: end of probe, return err: 0 [ 2.758096] nvsciipc: loaded module [ 2.764822] tun: Universal TUN/TAP device driver, 1.6 [ 2.767774] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.774188] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.779753] e1000e: Intel(R) PRO/1000 Network Driver [ 2.784418] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.790490] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.796044] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.802161] PPP generic driver version 2.4.2 [ 2.806269] PPP BSD Compression module registered [ 2.810769] PPP Deflate Compression module registered [ 2.816270] PPP MPPE Compression module registered [ 2.821016] usbcore: registered new interface driver r8152 [ 2.826793] usbcore: registered new interface driver asix [ 2.832136] usbcore: registered new interface driver ax88179_178a [ 2.838240] usbcore: registered new interface driver cdc_ether [ 2.843930] usbcore: registered new interface driver net1080 [ 2.849787] usbcore: registered new interface driver cdc_subset [ 2.855827] usbcore: registered new interface driver zaurus [ 2.861265] usbcore: registered new interface driver cdc_ncm [ 2.867199] usbcore: registered new interface driver aqc111 [ 2.872541] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.878932] ohci-pci: OHCI PCI platform driver [ 2.882957] ohci-platform: OHCI generic platform driver [ 2.888856] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.895283] usbcore: registered new interface driver uas [ 2.899561] usbcore: registered new interface driver usb-storage [ 2.905336] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.911426] mousedev: PS/2 mouse device common for all mice [ 2.916668] usbcore: registered new interface driver xpad [ 2.924287] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.927190] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.934954] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.941604] i2c /dev entries driver [ 2.944784] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.950826] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.955884] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.961541] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.966640] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.972366] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.977569] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.989694] device-mapper: uevent: version 1.0.3 [ 2.990094] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.997880] cpuidle: Initializing cpuidle driver [ 3.001717] sdhci: Secure Digital Host Controller Interface driver [ 3.006769] sdhci: Copyright(c) Pierre Ossman [ 3.011129] Synopsys Designware Multimedia Card Interface Driver [ 3.017283] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.023177] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.023765] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.036072] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.054900] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.063872] vdd-1v0: supplied by regulator-dummy [ 3.069252] vdd-1v8-hs: supplied by regulator-dummy [ 3.073837] vdd-1v8-ls: supplied by regulator-dummy [ 3.078487] vdd-1v8-ao: supplied by regulator-dummy [ 3.082222] vddio-ddr-1v1: supplied by regulator-dummy [ 3.086449] vdd-rtc: supplied by regulator-dummy [ 3.088081] spmic-ldo1: supplied by regulator-dummy [ 3.089178] vdd-ao-3v3: supplied by regulator-dummy [ 3.095189] vddio-emmc-3v3: supplied by regulator-dummy [ 3.101421] spmic-ldo4: supplied by regulator-dummy [ 3.102533] vdd-usb-3v3: supplied by regulator-dummy [ 3.108560] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.114725] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.120091] spmic-ldo8: supplied by vdd-1v8-ls [ 3.121393] gpio-510 (gpio_default): hogged as output/high [ 3.123000] gpio-511 (gpio_default): hogged as output/high [ 3.129825] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.268881] max77686-rtc max77620-rtc: registered as rtc0 [ 3.270134] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.270451] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.968892] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.969847] hid: raw HID events driver (C) Jiri Kosina [ 3.970479] usbcore: registered new interface driver usbhid [ 3.970646] usbhid: USB HID core driver [ 3.972255] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.973335] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.013995] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.089733] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.547 ms) ÿá[ 4.058806] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.059450] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.060742] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.061437] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.063177] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.064025] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.064624] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.065851] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.066160] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.068063] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.075287] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.082166] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.086321] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.092775] denver_knobs_init:MTS_VERSION:55637613 [ 4.106599] t19x_cache tegra-cache: probed [ 4.109227] optee: probing for conduit method. [ 4.110060] optee: revision 3.16 (65cc2218) [ 4.111031] optee: dynamic shared memory is enabled [ 4.113595] optee: initialized driver [ 4.120318] nvpmodel: initialized successfully [ 4.121183] tegra_hv: get_hvd: not initialized yet [ 4.125946] user_ivc_mempool: hypervisor not present [ 4.132177] usbcore: registered new interface driver snd-usb-audio [ 4.138736] u32 classifier [ 4.139999] input device check on [ 4.143653] Actions configured [ 4.147051] Initializing XFRM netlink socket [ 4.152191] NET: Registered protocol family 10 [ 4.158273] Segment Routing with IPv6 [ 4.159304] NET: Registered protocol family 17 [ 4.163878] NET: Registered protocol family 15 [ 4.167989] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.181590] Bluetooth: RFCOMM socket layer initialized [ 4.186337] Bluetooth: RFCOMM ver 1.11 [ 4.190401] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.196045] Bluetooth: HIDP socket layer initialized [ 4.202121] 9pnet: Installing 9P2000 support [ 4.205788] Key type dns_resolver registered [ 4.210680] registered taskstats version 1 [ 4.213877] Loading compiled-in X.509 certificates [ 4.226223] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.229804] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.239738] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.242164] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.250405] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.259035] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.375632] tegra194-pcie 14160000.pcie: Link up [ 4.378346] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.378556] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.378703] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.378938] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.379138] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.379589] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.380006] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.388951] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.389525] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.389957] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.391491] pci 0004:01:00.0: supports D1 D2 [ 4.391774] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.400457] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.400876] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.401147] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.401541] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.401876] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.404173] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.410192] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.417567] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.426384] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.436262] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.440972] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.446631] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.453577] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.462277] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.464074] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.472512] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.481277] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.596051] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.596605] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.596844] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.597020] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.597266] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.597500] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.597872] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.598342] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.615195] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.615764] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.617635] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.619065] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.620752] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.622217] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.623188] pci 0005:00:00.0: Removing from iommu group 7 [ 5.623467] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.652715] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.673325] host1x 13e10000.host1x: initialized [ 5.675079] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.675981] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.677111] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.677880] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.678892] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.679448] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.680648] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.681220] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.689803] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.696122] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.706721] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.713496] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.723009] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.730332] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.740204] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.746953] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.756807] falcon 15340000.vic: Adding to iommu group 17 [ 5.771508] falcon 15340000.vic: initialized [ 5.772648] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.777216] falcon 15380000.nvjpg: initialized [ 5.777722] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.789199] falcon 154c0000.nvenc: initialized [ 5.789750] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.799206] falcon 15a80000.nvenc1: initialized [ 5.799871] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.811311] nvdec 15480000.nvdec: initialized [ 5.811875] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.822597] nvdec 15140000.nvdec1: initialized [ 5.823133] tsec 15500000.tsec: Adding to iommu group 18 [ 5.828417] tsec 15500000.tsec: initialized [ 5.828945] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.837145] tsec 15100000.tsecb: initialized [ 5.840787] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.865278] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.875343] gpio-374 (wifi-enable): hogged as output/high [ 5.875778] gpio-431 (camera-control-output-low): hogged as output/low [ 5.876076] gpio-432 (camera-control-output-low): hogged as output/low [ 5.877544] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.879117] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.881644] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.887917] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.893344] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.899436] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.905281] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.913328] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.920518] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.931796] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.937121] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.943088] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.952169] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.961151] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.968262] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.976212] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.982183] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.992022] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.998320] pva 16000000.pva0: Adding to iommu group 22 [ 6.025008] pva 16000000.pva0: initialized [ 6.030091] pva 16800000.pva1: Adding to iommu group 23 [ 6.041248] pva 16800000.pva1: initialized [ 6.046551] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.067021] nvdla 15880000.nvdla0: initialized [ 6.068642] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.077648] nvdla 158c0000.nvdla1: initialized [ 6.079933] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.080188] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.080509] tegradccommon 15200000.display-hub: dma mapping done [ 6.082057] tegradc 15200000.display: Adding to iommu group 26 [ 6.089404] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.089779] generic_infoframe_type: 0x87 [ 6.090029] tegradc 15200000.display: DT parsed successfully [ 6.090421] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.092537] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.093628] tegradc 15210000.display: Adding to iommu group 26 [ 6.094248] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.107680] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.112502] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.117603] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.117779] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.125946] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.131576] tegra_cec 3960000.tegra_cec: probed [ 6.139744] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.152928] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.153389] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.158654] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.170771] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.172403] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.188654] kfuse 3830000.kfuse: initialized [ 6.192826] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.192961] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.206071] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.206186] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.212731] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.221231] tegradc 15210000.display: disp0 connected to head1->sor [ 6.226247] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.231989] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.244510] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.248226] tegradc 15210000.display: DT parsed successfully [ 6.254311] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.259277] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.276840] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.282782] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.302245] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.302611] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.305906] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.314349] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.322767] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.329249] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.336858] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.344328] usb usb1: Product: xHCI Host Controller [ 6.349301] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.355620] usb usb1: SerialNumber: 3610000.xhci [ 6.361226] hub 1-0:1.0: USB hub found [ 6.364229] hub 1-0:1.0: 4 ports detected [ 6.368710] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.373330] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.381191] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.388870] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.396531] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.403987] usb usb2: Product: xHCI Host Controller [ 6.408972] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.415187] usb usb2: SerialNumber: 3610000.xhci [ 6.420225] hub 2-0:1.0: USB hub found [ 6.423400] hub 2-0:1.0: 4 ports detected [ 6.462791] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.469319] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.470519] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.470735] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.483721] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1904000 KHz, changing to: 1907200 KHz [ 6.484754] tegra194-cpufreq ccplex: probed with BWMGR [ 6.485801] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.486528] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.487020] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.488239] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.498265] tegra194-vi5 15c10000.vi: initialized [ 6.499346] mmc0: CQHCI version 5.10 [ 6.499650] tegradc 15210000.display: disp0 connected to head1->sor [ 6.500857] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.501078] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.501083] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.501096] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.507117] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.513499] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.521664] tegradc 15210000.display: DT parsed successfully [ 6.527712] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.530351] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.534450] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.547574] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.548298] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.554048] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.554055] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.555300] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.560425] generic_infoframe_type: 0x87 [ 6.576110] tegradc 15200000.display: DT parsed successfully [ 6.582656] nvethernet 2490000.ethernet: Macsec not supported [ 6.584050] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.589130] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.596549] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.603757] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.610466] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.614241] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.614245] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.614626] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.619912] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.625708] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.633536] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.636032] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.637852] tegra-se-nvhost 15810000.se: initialized [ 6.642514] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.643170] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.643755] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.644416] tegra-se-nvhost 15820000.se: initialized [ 6.646506] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.646980] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.648861] tegra-se-nvhost 15830000.se: initialized [ 6.656756] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.664959] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.670279] mmc0: Command Queue Engine enabled [ 6.670284] mmc0: periodic cache flush enabled [ 6.670304] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.670815] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.670861] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.670960] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.673058] tegradc 15200000.display: probed [ 6.679848] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.695957] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.699006] tegra-se-nvhost 15840000.se: initialized [ 6.834131] Console: switching to colour frame buffer device 240x67 [ 6.835747] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.840009] tegradc 15200000.display: fb registered [ 6.840080] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.847795] tegra_actmon d230000.actmon: in actmon_register()... [ 6.856804] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.862753] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.870895] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.870907] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.870929] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.876578] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.876816] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.877188] hvc_sysfs: hypervisor is not present [ 6.883307] usb 1-2: Manufacturer: Generic [ 6.885408] hub 1-2:1.0: USB hub found [ 6.904824] ALSA device list: [ 6.912968] hub 1-2:1.0: 4 ports detected [ 6.916878] No soundcards found. [ 6.964474] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.990837] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.992209] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.992400] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.993405] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.993609] Extcon AUX1(HDMI) enable [ 6.993817] tegradc 15210000.display: disp1 connected to head1->sor [ 6.994160] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.994490] tegradc 15210000.display: DT parsed successfully [ 6.994675] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.001453] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.007459] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.020037] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.022150] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.024080] tegradc 15210000.display: probed [ 7.029454] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.038547] usb 2-3: Manufacturer: Generic [ 7.042650] tegradc 15210000.display: fb registered [ 7.049554] hub 2-3:1.0: USB hub found [ 7.051000] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.053443] Freeing unused kernel memory: 3968K [ 7.053815] hub 2-3:1.0: 4 ports detected [ 7.058681] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.075026] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.080464] tegradc 15210000.display: blank - powerdown [ 7.085964] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.087763] Run /init as init process [ 7.094198] Extcon DP: HPD disabled [ 7.100939] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.108029] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.113540] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.135557] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.135581] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.135952] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.155632] tegradc 15200000.display: blank - powerdown [ 7.164123] Root device found: mmcblk0p1 [ 7.166175] Found dev node: /dev/mmcblk0p1 [ 7.191214] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.191220] Extcon AUX1(HDMI) disable [ 7.201456] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.205707] Rootfs mounted over mmcblk0p1 [ 7.214792] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.215800] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.229049] tegradc 15200000.display: unblank [ 7.230195] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.230393] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.236380] Switching from initrd to actual rootfs [ 7.236651] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.238630] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.242753] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.242758] Extcon AUX1(HDMI) enable [ 7.255418] tegradc 15200000.display: sync windows ret = 247 [ 7.285977] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.287483] Extcon HDMI: HPD enabled [ 7.288711] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.288840] tegradc 15200000.display: hdmi: plugged [ 7.290306] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.290320] usb 1-3: Product: Bluetooth Radio [ 7.303973] usb 1-3: Manufacturer: Realtek [ 7.308173] usb 1-3: SerialNumber: 00e04c000001 [ 7.380646] systemd[1]: System time before build time, advancing clock. [ 7.453002] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.457968] systemd[1]: Detected architecture arm64. [ 7.502625] systemd[1]: Set hostname to . [ 7.664082] systemd-sysv-generator[244]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.022898] random: systemd: uninitialized urandom read (16 bytes read) [ 8.024813] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.026517] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.032609] systemd[1]: Created slice system-modprobe.slice. [ 8.036148] random: systemd: uninitialized urandom read (16 bytes read) [ 8.038950] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.042228] random: systemd: uninitialized urandom read (16 bytes read) [ 8.045003] systemd[1]: Created slice User and Session Slice. [ 8.048664] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.052953] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.056495] systemd[1]: Reached target User and Group Name Lookups. [ 8.058033] random: crng init done [ 8.059636] random: 3 urandom warning(s) missed due to ratelimiting [ 8.063194] systemd[1]: Reached target Slices. [ 8.066510] systemd[1]: Reached target Swap. [ 8.070753] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.074726] systemd[1]: Listening on Syslog Socket. [ 8.078520] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.081979] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.086472] systemd[1]: Listening on Journal Audit Socket. [ 8.090240] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.094140] systemd[1]: Listening on Journal Socket. [ 8.097970] systemd[1]: Listening on udev Control Socket. [ 8.101500] systemd[1]: Listening on udev Kernel Socket. [ 8.110082] systemd[1]: Mounting Huge Pages File System... [ 8.120016] systemd[1]: Mounting POSIX Message Queue File System... [ 8.130206] systemd[1]: Mounting RPC Pipe File System... [ 8.139144] systemd[1]: Mounting Kernel Debug File System... [ 8.147931] systemd[1]: Mounting Kernel Trace File System... [ 8.158473] systemd[1]: Starting Journal Service... [ 8.167808] systemd[1]: Starting Set the console keyboard layout... [ 8.176681] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.180415] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.187602] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.196149] systemd[1]: Started Nameserver information manager. [ 8.201018] systemd[1]: Reached target Network (Pre). [ 8.208655] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.208893] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.218728] systemd[1]: Starting Load Kernel Modules... [ 8.226818] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.235221] systemd[1]: Starting udev Coldplug all Devices... [ 8.246544] systemd[1]: Mounted Huge Pages File System. [ 8.251367] systemd[1]: Mounted POSIX Message Queue File System. [ 8.255155] systemd[1]: Mounted RPC Pipe File System. [ 8.256162] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.262298] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.262742] systemd[1]: Mounted Kernel Debug File System. [ 8.264712] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.266714] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.266727] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.266732] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.266951] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.267145] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.267313] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.267319] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.291926] systemd[1]: Mounted Kernel Trace File System. [ 8.299907] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.306785] systemd[1]: nvfb-udev.service: Succeeded. [ 8.311271] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.323445] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.336100] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.337824] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.345862] systemd[1]: Starting Load/Save Random Seed... [ 8.353902] systemd[1]: Starting Create System Users... [ 8.362169] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.362169] [ 8.390566] systemd[1]: Finished Load Kernel Modules. [ 8.395927] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.402596] systemd[1]: Mounting Kernel Configuration File System... [ 8.410563] systemd[1]: Started OP-TEE Client Supplicant. [ 8.418519] systemd[1]: Starting Apply Kernel Variables... [ 8.430090] systemd[1]: Finished Load/Save Random Seed. [ 8.434028] systemd[1]: Mounted Kernel Configuration File System. [ 8.441986] systemd[1]: Finished Set the console keyboard layout. [ 8.454252] systemd[1]: Finished Create System Users. [ 9.821016] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.827859] imx219 9-0010: board setup failed [ 9.829496] imx219: probe of 9-0010 failed with error -121 [ 9.843782] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.855081] imx219 10-0010: board setup failed [ 9.856836] imx219: probe of 10-0010 failed with error -121 [ 10.002764] hot-surface-alert cooling state: 0 -> 1 [ 10.845617] using random self ethernet address [ 10.846799] using random host ethernet address [ 11.283286] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.284738] Creating 1 MTD partitions on "spi6.0": [ 11.284751] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.180601] using random self ethernet address [ 12.181740] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.815683] nvidia: loading out-of-tree module taints kernel. [ 59.537340] watchdog: watchdog0: watchdog did not stop! [ 60.017811] Trying to unregister non-registered hwtime source [ 63.082355] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.083882] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.358] I> Active Boot chain : 0 [0002.029] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> hdmi cable connected [0003.611] W> set volts not configured for 'vdd-1v0' [0003.618] W> set volts not configured for 'vdd-1v8-hs' [0003.619] I> retrieved tmds range from prod_list_hdmi_soc [0003.626] E> invalid display type [0003.627] E> cannot find any other nvdisp nodes [0003.644] I> edid read success [0003.656] I> edid read success [0003.657] I> width = 640, height = 480, frequency = 25174825 [0003.657] I> width = 1920, height = 1080, frequency = 148500000 [0003.657] I> width = 1280, height = 768, frequency = 79500000 [0003.658] I> width = 1360, height = 768, frequency = 85500000 [0003.658] I> width = 720, height = 480, frequency = 26973026 [0003.662] I> width = 720, height = 576, frequency = 26973026 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1280, height = 720, frequency = 74175824 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 1920, height = 1080, frequency = 148351648 [0003.690] I> width = 720, height = 480, frequency = 26973026 [0003.696] I> width = 720, height = 576, frequency = 26973026 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 3840, height = 2160, frequency = 296703296 [0003.725] I> width = 4096, height = 2160, frequency = 296703296 [0003.730] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.742] I> hdmi_enable, starting HDMI initialisation [0003.747] I> hdmi_enable, HDMI initialisation complete [0003.755] initializing target [0003.756] calling apps_init() [0003.757] starting app kernel_boot_app [0003.757] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000630] Console: colour dummy device 80x25 [ 0.002140] printk: console [tty0] enabled [ 0.002201] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002239] pid_max: default: 32768 minimum: 301 [ 0.002400] LSM: Security Framework initializing [ 0.002456] Yama: becoming mindful. [ 0.002508] SELinux: Initializing. [ 0.002661] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002717] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005626] rcu: Hierarchical SRCU implementation. [ 0.005869] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006526] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006575] DTB Build time: Aug 10 2022 20:31:49 [ 0.009322] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009587] Remapping and enabling EFI services. [ 0.011570] smp: Bringing up secondary CPUs ... [ 0.040786] Detected PIPT I-cache on CPU1 [ 0.040920] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072308] Detected PIPT I-cache on CPU2 [ 0.072432] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101951] Detected PIPT I-cache on CPU3 [ 0.102099] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131939] Detected PIPT I-cache on CPU4 [ 0.132111] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162111] Detected PIPT I-cache on CPU5 [ 0.162252] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162653] smp: Brought up 1 node, 6 CPUs [ 0.162811] SMP: Total of 6 processors activated. [ 0.162883] CPU features: detected: Privileged Access Never [ 0.162921] CPU features: detected: LSE atomic instructions [ 0.162936] CPU features: detected: User Access Override [ 0.162949] CPU features: detected: 32-bit EL0 Support [ 0.162962] CPU features: detected: RAS Extension Support [ 0.162975] CPU features: detected: CRC32 instructions [ 0.162989] CPU features: detected: 32-bit EL1 Support [ 0.234126] CPU: All CPU(s) started at EL2 [ 0.241679] devtmpfs: initialized [ 0.289308] Registered cp15_barrier emulation handler [ 0.289441] Registered setend emulation handler [ 0.289460] KASLR enabled [ 0.289734] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289761] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291093] pinctrl core: initialized pinctrl subsystem [ 0.291901] SMBIOS 3.0.0 present. [ 0.291939] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292586] NET: Registered protocol family 16 [ 0.294571] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295071] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295766] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295819] audit: initializing netlink subsys (disabled) [ 0.296084] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296529] thermal_sys: Registered thermal governor 'step_wise' [ 0.296535] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296549] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298716] cpuidle: using governor menu [ 0.299125] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299480] ASID allocator initialised with 32768 entries [ 0.299681] Serial: AMBA PL011 UART driver [ 0.303069] Tegra reboot handler registered. [ 0.373511] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.373659] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.373881] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.373950] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.374075] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.374122] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.374237] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.374320] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.374474] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.374540] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.376840] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.376874] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.376903] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.376931] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.376961] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.376995] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.377035] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.377066] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.377092] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.377135] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.377160] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.377202] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.377228] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.377271] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.377296] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.377321] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.377346] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.377452] mc-err: mcerr ops are set to t19x [ 0.389766] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.389789] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.389801] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.389813] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.396619] ACPI: Interpreter disabled. [ 0.397807] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.399050] iommu: Default domain type: Translated [ 0.399112] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.399458] SCSI subsystem initialized [ 0.399616] usbcore: registered new interface driver usbfs [ 0.399659] usbcore: registered new interface driver hub [ 0.399693] usbcore: registered new device driver usb [ 0.400086] mc: Linux media interface: v0.10 [ 0.400116] videodev: Linux video capture interface: v2.00 [ 0.400406] pps_core: LinuxPPS API ver. 1 registered [ 0.400417] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.400436] PTP clock support registered [ 0.400654] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.400969] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401052] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.401644] Registered efivars operations [ 0.407592] FPGA manager framework [ 0.407696] Advanced Linux Sound Architecture Driver Initialized. [ 0.408282] Bluetooth: Core ver 2.22 [ 0.408317] NET: Registered protocol family 31 [ 0.408328] Bluetooth: HCI device and connection manager initialized [ 0.408343] Bluetooth: HCI socket layer initialized [ 0.408363] Bluetooth: L2CAP socket layer initialized [ 0.408385] Bluetooth: SCO socket layer initialized [ 0.409969] camchar: rtcpu character device driver loaded [ 0.410777] clocksource: Switched to clocksource arch_sys_counter [ 0.761116] VFS: Disk quotas dquot_6.6.0 [ 0.761189] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.761516] pnp: PnP ACPI: disabled [ 0.773506] la/ptsa driver initialized. [ 0.773648] NET: Registered protocol family 2 [ 0.773823] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.778452] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.778562] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.778843] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.779290] TCP: Hash tables configured (established 65536 bind 65536) [ 0.779438] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.779526] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.779723] NET: Registered protocol family 1 [ 0.780366] RPC: Registered named UNIX socket transport module. [ 0.780382] RPC: Registered udp transport module. [ 0.780391] RPC: Registered tcp transport module. [ 0.780400] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.780414] PCI: CLS 0 bytes, default 64 [ 0.780647] Trying to unpack rootfs image as initramfs... [ 0.971470] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.973377] Freeing initrd memory: 8196K [ 0.977544] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.977592] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.977651] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.978097] kvm [1]: IPA Size Limit: 40 bits [ 0.978719] kvm [1]: vgic interrupt IRQ9 [ 0.979319] kvm [1]: VHE mode initialized successfully [ 0.981219] Initialise system trusted keyrings [ 0.981589] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.989854] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.990956] NFS: Registering the id_resolver key type [ 0.990993] Key type id_resolver registered [ 0.991010] Key type id_legacy registered [ 0.991107] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.991144] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.991209] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.001199] NET: Registered protocol family 38 [ 1.001221] Key type asymmetric registered [ 1.001236] Asymmetric key parser 'x509' registered [ 1.001321] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.001606] io scheduler mq-deadline registered [ 1.001651] io scheduler kyber registered [ 1.008368] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.011658] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.011765] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.011847] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.011921] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.011993] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.017892] scrncapt: init (heads:4 wins:6 planes:4) [ 1.018090] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.019088] EINJ: ACPI disabled. [ 1.022633] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.022696] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.022718] tegra-pmc: ### PMC reset level: L1 [ 1.022737] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.022879] tegra-pmc: PMC Prod config success [ 1.028330] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.045268] random: fast init done [ 2.579595] printk: console [ttyTCU0] enabled [ 2.585931] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.590503] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.595093] arm-smmu 10000000.iommu: stage 1 translation [ 2.600381] arm-smmu 10000000.iommu: stage 2 translation [ 2.605814] arm-smmu 10000000.iommu: nested translation [ 2.611421] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.618586] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.629676] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.631449] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.638272] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.645674] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.651309] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.656036] arm-smmu 12000000.iommu: stage 1 translation [ 2.661285] arm-smmu 12000000.iommu: stage 2 translation [ 2.666968] arm-smmu 12000000.iommu: nested translation [ 2.672170] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.679317] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.690456] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.692445] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.699255] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.706657] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.716357] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.719683] tegra_profiler: auth: init [ 2.723933] THERMAL EST: found 3 subdevs [ 2.727103] THERMAL EST num_resources: 0 [ 2.731193] [THERMAL EST subdev 0] [ 2.734241] [THERMAL EST subdev 1] [ 2.737932] [THERMAL EST subdev 2] [ 2.740917] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.747654] THERMAL EST: thz register success. [ 2.751876] THERMAL EST: end of probe, return err: 0 [ 2.757205] nvsciipc: loaded module [ 2.764367] tun: Universal TUN/TAP device driver, 1.6 [ 2.766731] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.772943] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.778508] e1000e: Intel(R) PRO/1000 Network Driver [ 2.783174] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.789513] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.794805] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.800982] PPP generic driver version 2.4.2 [ 2.805211] PPP BSD Compression module registered [ 2.809532] PPP Deflate Compression module registered [ 2.814791] PPP MPPE Compression module registered [ 2.820047] usbcore: registered new interface driver r8152 [ 2.825293] usbcore: registered new interface driver asix [ 2.830883] usbcore: registered new interface driver ax88179_178a [ 2.837010] usbcore: registered new interface driver cdc_ether [ 2.842699] usbcore: registered new interface driver net1080 [ 2.848306] usbcore: registered new interface driver cdc_subset [ 2.854598] usbcore: registered new interface driver zaurus [ 2.860300] usbcore: registered new interface driver cdc_ncm [ 2.865969] usbcore: registered new interface driver aqc111 [ 2.871366] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.877432] ohci-pci: OHCI PCI platform driver [ 2.881986] ohci-platform: OHCI generic platform driver [ 2.887831] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.893890] usbcore: registered new interface driver uas [ 2.898055] usbcore: registered new interface driver usb-storage [ 2.904445] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.910423] mousedev: PS/2 mouse device common for all mice [ 2.915183] usbcore: registered new interface driver xpad [ 2.923518] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.926149] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.933977] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.940588] i2c /dev entries driver [ 2.944035] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.949733] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.954702] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.960358] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.965747] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.971031] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.976405] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.990497] device-mapper: uevent: version 1.0.3 [ 2.991001] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.997116] cpuidle: Initializing cpuidle driver [ 3.000776] sdhci: Secure Digital Host Controller Interface driver [ 3.005522] sdhci: Copyright(c) Pierre Ossman [ 3.009880] Synopsys Designware Multimedia Card Interface Driver [ 3.016078] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.021823] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.022703] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.035344] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.057601] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.067178] vdd-1v0: supplied by regulator-dummy [ 3.072692] vdd-1v8-hs: supplied by regulator-dummy [ 3.077508] vdd-1v8-ls: supplied by regulator-dummy [ 3.082312] vdd-1v8-ao: supplied by regulator-dummy [ 3.086281] vddio-ddr-1v1: supplied by regulator-dummy [ 3.090756] vdd-rtc: supplied by regulator-dummy [ 3.092589] spmic-ldo1: supplied by regulator-dummy [ 3.093815] vdd-ao-3v3: supplied by regulator-dummy [ 3.100180] vddio-emmc-3v3: supplied by regulator-dummy [ 3.106675] spmic-ldo4: supplied by regulator-dummy [ 3.107973] vdd-usb-3v3: supplied by regulator-dummy [ 3.114252] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.120468] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.126091] spmic-ldo8: supplied by vdd-1v8-ls [ 3.127611] gpio-510 (gpio_default): hogged as output/high [ 3.129002] gpio-511 (gpio_default): hogged as output/high [ 3.131975] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.267911] max77686-rtc max77620-rtc: registered as rtc0 [ 3.269001] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.269346] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.114014] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.115216] hid: raw HID events driver (C) Jiri Kosina [ 4.116132] usbcore: registered new interface driver usbhid [ 4.116286] usbhid: USB HID core driver [ 4.118434] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.119923] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.158512] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.232655] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.952 ms) ÿá[ 4.204011] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.204704] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.205721] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.206435] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.208133] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.208800] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.209356] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.210702] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.211117] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.213877] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.221073] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.226728] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.232164] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.238054] denver_knobs_init:MTS_VERSION:55637613 [ 4.250866] t19x_cache tegra-cache: probed [ 4.253986] optee: probing for conduit method. [ 4.254929] optee: revision 3.16 (65cc2218) [ 4.256047] optee: dynamic shared memory is enabled [ 4.259158] optee: initialized driver [ 4.266215] nvpmodel: initialized successfully [ 4.266901] tegra_hv: get_hvd: not initialized yet [ 4.271059] user_ivc_mempool: hypervisor not present [ 4.277264] usbcore: registered new interface driver snd-usb-audio [ 4.283702] u32 classifier [ 4.285094] input device check on [ 4.288977] Actions configured [ 4.292253] Initializing XFRM netlink socket [ 4.297340] NET: Registered protocol family 10 [ 4.304469] Segment Routing with IPv6 [ 4.304791] NET: Registered protocol family 17 [ 4.308842] NET: Registered protocol family 15 [ 4.313564] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.327576] Bluetooth: RFCOMM socket layer initialized [ 4.331797] Bluetooth: RFCOMM ver 1.11 [ 4.335396] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.341436] Bluetooth: HIDP socket layer initialized [ 4.347338] 9pnet: Installing 9P2000 support [ 4.350553] Key type dns_resolver registered [ 4.356810] registered taskstats version 1 [ 4.359041] Loading compiled-in X.509 certificates [ 4.371727] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.375055] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.385124] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.387054] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.395638] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.404240] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.519087] tegra194-pcie 14160000.pcie: Link up [ 4.522165] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.522419] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.522615] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.522943] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.523148] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.523520] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.523996] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.537397] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.537914] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.538446] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.540050] pci 0004:01:00.0: supports D1 D2 [ 4.540208] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.548556] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.548941] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.549165] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.549585] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.549844] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.550013] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.553689] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.561051] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.569793] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.579778] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.584626] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.589944] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.596755] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.606046] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.607797] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.615970] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.624673] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.740052] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.740755] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.740965] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.741153] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.741394] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.741582] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.742018] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.742423] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.757938] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.758334] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.760352] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.761931] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.763468] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.764863] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.765867] pci 0005:00:00.0: Removing from iommu group 7 [ 5.766162] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.796760] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.818774] host1x 13e10000.host1x: initialized [ 5.820658] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.821611] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.823265] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.824053] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.825245] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.825893] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.827148] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.827764] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.833215] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.840340] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.850367] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.857094] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.867078] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.874145] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.884070] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.891130] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.900784] falcon 15340000.vic: Adding to iommu group 17 [ 5.914934] falcon 15340000.vic: initialized [ 5.915861] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.921256] falcon 15380000.nvjpg: initialized [ 5.921926] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.933753] falcon 154c0000.nvenc: initialized [ 5.934366] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.943872] falcon 15a80000.nvenc1: initialized [ 5.944626] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.956602] nvdec 15480000.nvdec: initialized [ 5.957129] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.965963] nvdec 15140000.nvdec1: initialized [ 5.966474] tsec 15500000.tsec: Adding to iommu group 18 [ 5.971868] tsec 15500000.tsec: initialized [ 5.972352] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.981001] tsec 15100000.tsecb: initialized [ 5.984678] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.010292] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.021752] gpio-374 (wifi-enable): hogged as output/high [ 6.022085] gpio-431 (camera-control-output-low): hogged as output/low [ 6.022369] gpio-432 (camera-control-output-low): hogged as output/low [ 6.024148] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.025786] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.026304] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.032113] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.037431] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.043493] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.049694] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.057238] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.064753] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.075951] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.081440] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.087043] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.095936] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.105205] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.112791] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.120417] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.126247] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.135920] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.142198] pva 16000000.pva0: Adding to iommu group 22 [ 6.169725] pva 16000000.pva0: initialized [ 6.175154] pva 16800000.pva1: Adding to iommu group 23 [ 6.186099] pva 16800000.pva1: initialized [ 6.190530] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.210496] nvdla 15880000.nvdla0: initialized [ 6.211806] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.220513] nvdla 158c0000.nvdla1: initialized [ 6.223554] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.223867] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.224195] tegradccommon 15200000.display-hub: dma mapping done [ 6.224300] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.224698] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.225370] tegradc 15200000.display: Adding to iommu group 26 [ 6.225682] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.225711] tegradc 15210000.display: Adding to iommu group 26 [ 6.232287] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.233399] tegradc 15210000.display: disp0 connected to head1->sor [ 6.237515] tegra_cec 3960000.tegra_cec: probed [ 6.244155] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.249115] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.256140] tegradc 15210000.display: DT parsed successfully [ 6.261562] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.267312] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.274664] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.281734] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.288158] kfuse 3830000.kfuse: initialized [ 6.294189] generic_infoframe_type: 0x87 [ 6.299033] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.302219] tegradc 15200000.display: DT parsed successfully [ 6.308796] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.314606] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.321615] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.336424] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.337060] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.343125] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.343133] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.360540] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.369830] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.374153] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.386654] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.387081] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.407157] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.412450] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.412481] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.428746] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.430870] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.444682] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.450014] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.458247] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.467124] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.473465] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.481299] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.488236] usb usb1: Product: xHCI Host Controller [ 6.493430] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.499410] usb usb1: SerialNumber: 3610000.xhci [ 6.505174] hub 1-0:1.0: USB hub found [ 6.508017] hub 1-0:1.0: 4 ports detected [ 6.512685] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.517368] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.525342] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.532831] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.540623] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.548017] usb usb2: Product: xHCI Host Controller [ 6.553028] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.559199] usb usb2: SerialNumber: 3610000.xhci [ 6.564852] hub 2-0:1.0: USB hub found [ 6.567713] hub 2-0:1.0: 4 ports detected [ 6.609869] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.615570] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.616837] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.617025] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.630397] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1904000 KHz, changing to: 1907200 KHz [ 6.631438] tegra194-cpufreq ccplex: probed with BWMGR [ 6.632493] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.633281] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.633727] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.634983] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.642017] tegra194-vi5 15c10000.vi: initialized [ 6.643530] tegradc 15210000.display: disp0 connected to head1->sor [ 6.644725] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.647614] mmc0: CQHCI version 5.10 [ 6.650954] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.651012] tegradc 15210000.display: DT parsed successfully [ 6.651018] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.651125] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.651149] generic_infoframe_type: 0x87 [ 6.651217] tegradc 15200000.display: DT parsed successfully [ 6.651261] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.652098] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.652109] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.652116] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.652543] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.652549] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.652710] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.653789] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.654077] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.654082] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.654089] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.654094] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.654098] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.658847] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.664543] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.666808] tegradc 15200000.display: probed [ 6.670432] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.686272] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.688298] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.774839] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.781811] mmc0: Command Queue Engine enabled [ 6.784240] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.784297] nvethernet 2490000.ethernet: Macsec not supported [ 6.785574] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.791772] mmc0: periodic cache flush enabled [ 6.791793] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.799941] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.806351] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.810541] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.817037] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.825184] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.843425] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.851583] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.921034] Console: switching to colour frame buffer device 240x67 [ 6.922556] tegra-se-nvhost 15810000.se: initialized [ 6.926976] tegradc 15200000.display: fb registered [ 6.936830] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.937012] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.943501] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.949472] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.955124] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.967794] tegra-se-nvhost 15820000.se: initialized [ 6.972096] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.973927] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.980335] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.980340] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.980344] usb 1-2: Manufacturer: Generic [ 7.003061] hub 1-2:1.0: USB hub found [ 7.003421] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.007824] hub 1-2:1.0: 4 ports detected [ 7.013655] tegra-se-nvhost 15830000.se: initialized [ 7.023177] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.028525] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.034826] tegra-se-nvhost 15840000.se: initialized [ 7.038375] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.040802] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.049227] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.055641] tegra_actmon d230000.actmon: in actmon_register()... [ 7.061621] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.068008] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.076150] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.081208] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.087692] Extcon AUX1(HDMI) enable [ 7.087751] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.087820] tegradc 15210000.display: disp1 connected to head1->sor [ 7.087930] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.088017] tegradc 15210000.display: DT parsed successfully [ 7.088053] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.088143] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.088149] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.096418] hvc_sysfs: hypervisor is not present [ 7.135767] tegradc 15210000.display: probed [ 7.148433] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.156571] random: crng init done [ 7.164213] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.174605] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.174609] usb 2-3: Manufacturer: Generic [ 7.179113] ALSA device list: [ 7.179575] tegradc 15210000.display: fb registered [ 7.183510] No soundcards found. [ 7.185402] hub 2-3:1.0: USB hub found [ 7.187268] hub 2-3:1.0: 4 ports detected [ 7.190272] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.190277] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.190284] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.223174] tegradc 15210000.display: blank - powerdown [ 7.228668] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.228672] Extcon DP: HPD disabled [ 7.228676] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.228686] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.228691] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.260014] tegradc 15200000.display: blank - powerdown [ 7.266826] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.294832] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.305502] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.305506] Extcon AUX1(HDMI) disable [ 7.328783] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.329632] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.341436] tegradc 15200000.display: unblank [ 7.342492] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.342791] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.348448] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.350406] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.354419] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.354423] Extcon AUX1(HDMI) enable [ 7.359372] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.359378] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.367155] tegradc 15200000.display: sync windows ret = 246 [ 7.407868] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.408839] Freeing unused kernel memory: 3968K [ 7.409388] Extcon HDMI: HPD enabled [ 7.409394] tegradc 15200000.display: hdmi: plugged [ 7.413915] Run /init as init process [ 7.416438] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.417939] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.420490] usb 1-3: Product: Bluetooth Radio [ 7.424947] usb 1-3: Manufacturer: Realtek [ 7.424951] usb 1-3: SerialNumber: 00e04c000001 [ 7.484859] Root device found: mmcblk0p1 [ 7.488281] Found dev node: /dev/mmcblk0p1 [ 7.524136] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.529385] Rootfs mounted over mmcblk0p1 [ 7.566557] Switching from initrd to actual rootfs [ 7.727701] systemd[1]: System time before build time, advancing clock. [ 7.801740] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.806740] systemd[1]: Detected architecture arm64. [ 7.863828] systemd[1]: Set hostname to . [ 8.022960] systemd-sysv-generator[245]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.363255] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.365043] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.370413] systemd[1]: Created slice system-modprobe.slice. [ 8.375154] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.379297] systemd[1]: Created slice User and Session Slice. [ 8.382704] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.386999] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.390326] systemd[1]: Reached target User and Group Name Lookups. [ 8.393620] systemd[1]: Reached target Slices. [ 8.396695] systemd[1]: Reached target Swap. [ 8.400691] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.404372] systemd[1]: Listening on Syslog Socket. [ 8.407975] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.411392] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.415916] systemd[1]: Listening on Journal Audit Socket. [ 8.419998] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.424459] systemd[1]: Listening on Journal Socket. [ 8.428495] systemd[1]: Listening on udev Control Socket. [ 8.431999] systemd[1]: Listening on udev Kernel Socket. [ 8.440413] systemd[1]: Mounting Huge Pages File System... [ 8.448652] systemd[1]: Mounting POSIX Message Queue File System... [ 8.456645] systemd[1]: Mounting RPC Pipe File System... [ 8.465097] systemd[1]: Mounting Kernel Debug File System... [ 8.473610] systemd[1]: Mounting Kernel Trace File System... [ 8.483425] systemd[1]: Starting Journal Service... [ 8.492237] systemd[1]: Starting Set the console keyboard layout... [ 8.500437] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.504036] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.510589] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.518817] systemd[1]: Started Nameserver information manager. [ 8.523918] systemd[1]: Reached target Network (Pre). [ 8.531151] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.533027] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.542312] systemd[1]: Starting Load Kernel Modules... [ 8.550189] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.558284] systemd[1]: Starting udev Coldplug all Devices... [ 8.569575] systemd[1]: Mounted Huge Pages File System. [ 8.573541] systemd[1]: Mounted POSIX Message Queue File System. [ 8.581470] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.583130] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.585191] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.586739] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.588351] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.589794] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.589843] systemd[1]: Mounted RPC Pipe File System. [ 8.591599] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.594364] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.596082] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.596090] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.601069] systemd[1]: Mounted Kernel Debug File System. [ 8.605463] systemd[1]: Mounted Kernel Trace File System. [ 8.611687] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.617735] systemd[1]: nvfb-udev.service: Succeeded. [ 8.622548] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.635628] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.648277] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.650050] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.656765] systemd[1]: Starting Load/Save Random Seed... [ 8.665846] systemd[1]: Starting Create System Users... [ 8.698432] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.698432] [ 8.724440] systemd[1]: Finished Load/Save Random Seed. [ 8.731976] systemd[1]: Finished Load Kernel Modules. [ 8.736936] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.744464] systemd[1]: Mounting Kernel Configuration File System... [ 8.752493] systemd[1]: Started OP-TEE Client Supplicant. [ 8.761594] systemd[1]: Starting Apply Kernel Variables... [ 8.771902] systemd[1]: Finished Set the console keyboard layout. [ 8.776113] systemd[1]: Mounted Kernel Configuration File System. [ 8.787545] systemd[1]: Finished Create System Users. [ 10.146911] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.157849] imx219 9-0010: board setup failed [ 10.159368] imx219: probe of 9-0010 failed with error -121 [ 10.172665] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.183862] imx219 10-0010: board setup failed [ 10.186146] imx219: probe of 10-0010 failed with error -121 [ 10.233209] hot-surface-alert cooling state: 0 -> 1 [ 11.138851] using random self ethernet address [ 11.140234] using random host ethernet address [ 11.683650] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.685437] Creating 1 MTD partitions on "spi6.0": [ 11.695017] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.473970] using random self ethernet address [ 12.475644] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.813443] nvidia: loading out-of-tree module taints kernel. [ 59.224736] watchdog: watchdog0: watchdog did not stop! [ 59.671825] Trying to unregister non-registered hwtime source [ 62.734261] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.736522] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy : 1, bÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.310] I> sdmmc DDR50 mode [0001.328] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.345] W> Cannot find any partition table for 00000003 [0001.346] > PARTITION_MANAGER: Failed to publish partition. [0001.362] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.363] I> Active Boot chain : 0 [0002.034] I> Relocating BR-BCT [0002.035] > DEVICE_PROD: device prod is not initialized. [0002.341] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.342] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.342] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.343] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.343] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.344] I> dram_block larger than 80000000 [0002.346] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.357] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.361] I> found decompressor handler: lz4 [0002.590] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.592] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.211] I> Welcome to NVDisp-Init [0003.212] I> NVDisp-Init version: t194-f9ecfedc [0003.212] I> CPU-BL Params @ 0xca020000 [0003.212] I> 0) Base:0x00000000 Size:0x00000000 [0003.213] I> 1) Base:0xc8300000 Size:0x00100000 [0003.213] I> 2) Base:0xc9800000 Size:0x00200000 [0003.213] I> 3) Base:0xc8600000 Size:0x00200000 [0003.216] I> 4) Base:0xc8200000 Size:0x00100000 [0003.220] I> 5) Base:0xc8100000 Size:0x00100000 [0003.225] I> 6) Base:0xc9400000 Size:0x00400000 [0003.229] I> 7) Base:0xc9000000 Size:0x00400000 [0003.234] I> 8) Base:0xc8000000 Size:0x00100000 [0003.238] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.243] I> 10) Base:0xca800000 Size:0x00800000 [0003.247] I> 11) Base:0x40000000 Size:0x00040000 [0003.251] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.256] I> 13) Base:0x40046000 Size:0x00002000 [0003.260] I> 14) Base:0x40048000 Size:0x00002000 [0003.265] I> 15) Base:0xaf000000 Size:0x00004000 [0003.269] I> 16) Base:0x4004a000 Size:0x00002000 [0003.274] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.278] I> 18) Base:0x4004c000 Size:0x00002000 [0003.283] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.287] I> 20) Base:0x4004e000 Size:0x00002000 [0003.292] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.296] I> 22) Base:0x00000000 Size:0x00000000 [0003.301] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.305] I> 24) Base:0xcc000000 Size:0x02000000 [0003.309] I> 25) Base:0x40050000 Size:0x00002000 [0003.314] I> 26) Base:0x40040000 Size:0x00006000 [0003.318] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.323] I> 28) Base:0xc8400000 Size:0x00200000 [0003.327] I> 29) Base:0xc8800000 Size:0x00400000 [0003.332] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.336] I> 31) Base:0x00000000 Size:0x00000000 [0003.341] I> 32) Base:0xf8000000 Size:0x08000000 [0003.345] I> 33) Base:0xce000000 Size:0x2a000000 [0003.350] I> 34) Base:0xcb000000 Size:0x01000000 [0003.354] I> 35) Base:0xae000000 Size:0x01000000 [0003.359] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.363] I> 37) Base:0xca000000 Size:0x00800000 [0003.367] I> 38) Base:0x80000000 Size:0x20000000 [0003.372] I> 39) Base:0xb0000000 Size:0x08000000 [0003.376] I> 40) Base:0x00000000 Size:0x00000000 [0003.381] I> 41) Base:0x00000000 Size:0x00000000 [0003.385] I> 42) Base:0x00000000 Size:0x00000000 [0003.390] I> 43) Base:0x00000000 Size:0x00000000 [0003.394] I> 44) Base:0x00000000 Size:0x00000000 [0003.399] I> 45) Base:0x00000000 Size:0x00000000 [0003.403] GIC-SPI Target CPU: 0 [0003.406] Interrupts Init done [0003.409] calling constructors [0003.412] initializing heap [0003.415] I> Heap: [0xa0960000 ... 0xadf00000] [0003.419] initializing threads [0003.422] initializing timers [0003.425] creating bootstrap completion thread [0003.429] top of bootstrap2() [0003.432] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.436] initializing platform [0003.439] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.445] W> device prod register failed [0003.448] I> Bl_dtb @0xadf00000 [0003.451] I> gpio framework initialized [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.469] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.473] I> fixed regulator driver initialized [0003.492] I> register 'maxim' power off handle [0003.496] I> virtual i2c enabled [0003.496] I> registered 'maxim,max20024' pmic [0003.497] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.497] I> Boot-device: QSPI [0003.497] I> Boot_device: QSPI_FLASH instance: 0 [0003.500] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.511] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.518] I> QSPI source rate = 204000 Khz [0003.521] I> Requested rate for QSPI clock = 34000 Khz [0003.526] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.531] I> tx_clk_tap_delay : 0 [0003.534] I> rx_clk_tap_delay : 16 [0003.537] I> QSPI Flash Size = 32 MB [0003.545] I> Qspi initialized successfully [0003.545] I> qspi flash-0 params source = boot args [0003.550] W> No board IDs available [0003.553] E> Failed to get board id info! [0003.558] I> sdmmc-3 params source = safe params [0003.566] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.567] W> Cannot find any partition table for 00000003 [0003.572] E> Failed to publish 00000003 [0003.576] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> regulator 'vdd-hdmi-5v0' already enabled [0003.606] I> hdmi cable connected [0003.611] W> set volts not configured for 'vdd-1v0' [0003.615] W> set volts not configured for 'vdd-1v8-hs' [0003.616] I> retrieved tmds range from prod_list_hdmi_soc [0003.621] E> invalid display type [0003.623] E> cannot find any other nvdisp nodes [0003.639] I> edid read success [0003.651] I> edid read success [0003.652] I> width = 640, height = 480, frequency = 25174825 [0003.652] I> width = 1920, height = 1080, frequency = 148500000 [0003.652] I> width = 1280, height = 768, frequency = 79500000 [0003.653] I> width = 1360, height = 768, frequency = 85500000 [0003.653] I> width = 720, height = 480, frequency = 26973026 [0003.657] I> width = 720, height = 576, frequency = 26973026 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 720, height = 480, frequency = 26973026 [0003.691] I> width = 720, height = 576, frequency = 26973026 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 4096, height = 2160, frequency = 296703296 [0003.725] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.737] I> hdmi_enable, starting HDMI initialisation [0003.741] I> hdmi_enable, HDMI initialisation complete [0003.750] initializing target [0003.751] calling apps_init() [0003.752] starting app kernel_boot_app [0003.753] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000710] Console: colour dummy device 80x25 [ 0.002131] printk: console [tty0] enabled [ 0.002204] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002240] pid_max: default: 32768 minimum: 301 [ 0.002433] LSM: Security Framework initializing [ 0.002490] Yama: becoming mindful. [ 0.002534] SELinux: Initializing. [ 0.002691] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002730] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005720] rcu: Hierarchical SRCU implementation. [ 0.005986] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006703] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006773] DTB Build time: Aug 10 2022 20:31:49 [ 0.009467] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009702] Remapping and enabling EFI services. [ 0.012043] smp: Bringing up secondary CPUs ... [ 0.041155] Detected PIPT I-cache on CPU1 [ 0.041232] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073323] Detected PIPT I-cache on CPU2 [ 0.073432] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102996] Detected PIPT I-cache on CPU3 [ 0.103137] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132890] Detected PIPT I-cache on CPU4 [ 0.133068] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162838] Detected PIPT I-cache on CPU5 [ 0.163037] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163405] smp: Brought up 1 node, 6 CPUs [ 0.163569] SMP: Total of 6 processors activated. [ 0.163641] CPU features: detected: Privileged Access Never [ 0.163667] CPU features: detected: LSE atomic instructions [ 0.163681] CPU features: detected: User Access Override [ 0.163695] CPU features: detected: 32-bit EL0 Support [ 0.163709] CPU features: detected: RAS Extension Support [ 0.163721] CPU features: detected: CRC32 instructions [ 0.163735] CPU features: detected: 32-bit EL1 Support [ 0.232560] CPU: All CPU(s) started at EL2 [ 0.239038] devtmpfs: initialized [ 0.284900] Registered cp15_barrier emulation handler [ 0.285018] Registered setend emulation handler [ 0.285045] KASLR enabled [ 0.285285] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285310] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286648] pinctrl core: initialized pinctrl subsystem [ 0.287561] SMBIOS 3.0.0 present. [ 0.287592] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288237] NET: Registered protocol family 16 [ 0.290225] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.290730] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291454] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291533] audit: initializing netlink subsys (disabled) [ 0.291819] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292285] thermal_sys: Registered thermal governor 'step_wise' [ 0.292293] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292311] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294376] cpuidle: using governor menu [ 0.294879] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295295] ASID allocator initialised with 32768 entries [ 0.295524] Serial: AMBA PL011 UART driver [ 0.298655] Tegra reboot handler registered. [ 0.370870] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.371016] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.371233] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.371282] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.371412] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.371459] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.371579] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.371654] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.371816] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.371862] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.374213] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.374278] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.374315] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.374345] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.374376] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.374406] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.374446] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.374481] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.374507] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.374532] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.374559] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.374585] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.374610] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.374652] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.374680] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.374722] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.374748] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.374865] mc-err: mcerr ops are set to t19x [ 0.387507] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.387529] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.387543] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.387555] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.394052] ACPI: Interpreter disabled. [ 0.395356] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.396831] iommu: Default domain type: Translated [ 0.396910] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.397281] SCSI subsystem initialized [ 0.397437] usbcore: registered new interface driver usbfs [ 0.397483] usbcore: registered new interface driver hub [ 0.397517] usbcore: registered new device driver usb [ 0.397924] mc: Linux media interface: v0.10 [ 0.397954] videodev: Linux video capture interface: v2.00 [ 0.398297] pps_core: LinuxPPS API ver. 1 registered [ 0.398310] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.398331] PTP clock support registered [ 0.398543] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.398861] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.398955] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.399557] Registered efivars operations [ 0.405268] FPGA manager framework [ 0.405374] Advanced Linux Sound Architecture Driver Initialized. [ 0.405973] Bluetooth: Core ver 2.22 [ 0.406015] NET: Registered protocol family 31 [ 0.406046] Bluetooth: HCI device and connection manager initialized [ 0.406064] Bluetooth: HCI socket layer initialized [ 0.406081] Bluetooth: L2CAP socket layer initialized [ 0.406120] Bluetooth: SCO socket layer initialized [ 0.407725] camchar: rtcpu character device driver loaded [ 0.408795] clocksource: Switched to clocksource arch_sys_counter [ 0.717581] VFS: Disk quotas dquot_6.6.0 [ 0.717657] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.718035] pnp: PnP ACPI: disabled [ 0.730040] la/ptsa driver initialized. [ 0.730188] NET: Registered protocol family 2 [ 0.730374] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.735383] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.735463] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.735717] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.736150] TCP: Hash tables configured (established 65536 bind 65536) [ 0.736286] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.736379] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.736595] NET: Registered protocol family 1 [ 0.737406] RPC: Registered named UNIX socket transport module. [ 0.737436] RPC: Registered udp transport module. [ 0.737450] RPC: Registered tcp transport module. [ 0.737463] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.737498] PCI: CLS 0 bytes, default 64 [ 0.737803] Trying to unpack rootfs image as initramfs... [ 1.006046] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.008835] Freeing initrd memory: 8196K [ 1.014053] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.014094] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.014136] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.014764] kvm [1]: IPA Size Limit: 40 bits [ 1.015290] kvm [1]: vgic interrupt IRQ9 [ 1.015889] kvm [1]: VHE mode initialized successfully [ 1.017861] Initialise system trusted keyrings [ 1.018220] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.025850] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.026910] NFS: Registering the id_resolver key type [ 1.026947] Key type id_resolver registered [ 1.026961] Key type id_legacy registered [ 1.027074] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.027099] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.027135] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.038571] NET: Registered protocol family 38 [ 1.038600] Key type asymmetric registered [ 1.038615] Asymmetric key parser 'x509' registered [ 1.038679] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.038928] io scheduler mq-deadline registered [ 1.038946] io scheduler kyber registered [ 1.045560] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.048506] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.048586] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.048657] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.048762] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.048839] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.054617] scrncapt: init (heads:4 wins:6 planes:4) [ 1.054740] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.055805] EINJ: ACPI disabled. [ 1.059213] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.059240] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.059255] tegra-pmc: ### PMC reset level: L1 [ 1.059268] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.059341] tegra-pmc: PMC Prod config success [ 1.065048] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.102635] random: fast init done [ 1.104823] printk: console [ttyTCU0] enabled [ 2.623008] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.627537] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.632104] arm-smmu 10000000.iommu: stage 1 translation [ 2.637436] arm-smmu 10000000.iommu: stage 2 translation [ 2.643159] arm-smmu 10000000.iommu: nested translation [ 2.648176] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.655611] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.667014] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.668445] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.675287] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.682916] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.688064] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.693048] arm-smmu 12000000.iommu: stage 1 translation [ 2.698325] arm-smmu 12000000.iommu: stage 2 translation [ 2.704013] arm-smmu 12000000.iommu: nested translation [ 2.709180] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.716354] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.727543] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.729452] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.736270] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.743418] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.753675] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.756464] tegra_profiler: auth: init [ 2.760799] THERMAL EST: found 3 subdevs [ 2.764339] THERMAL EST num_resources: 0 [ 2.767959] [THERMAL EST subdev 0] [ 2.771538] [THERMAL EST subdev 1] [ 2.774951] [THERMAL EST subdev 2] [ 2.777979] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.784460] THERMAL EST: thz register success. [ 2.788651] THERMAL EST: end of probe, return err: 0 [ 2.794237] nvsciipc: loaded module [ 2.801551] tun: Universal TUN/TAP device driver, 1.6 [ 2.803961] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.809699] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.815524] e1000e: Intel(R) PRO/1000 Network Driver [ 2.820188] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.826283] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.831563] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.838113] PPP generic driver version 2.4.2 [ 2.842000] PPP BSD Compression module registered [ 2.846804] PPP Deflate Compression module registered [ 2.852044] PPP MPPE Compression module registered [ 2.856803] usbcore: registered new interface driver r8152 [ 2.862312] usbcore: registered new interface driver asix [ 2.867904] usbcore: registered new interface driver ax88179_178a [ 2.874023] usbcore: registered new interface driver cdc_ether [ 2.879729] usbcore: registered new interface driver net1080 [ 2.885316] usbcore: registered new interface driver cdc_subset [ 2.891696] usbcore: registered new interface driver zaurus [ 2.897314] usbcore: registered new interface driver cdc_ncm [ 2.902988] usbcore: registered new interface driver aqc111 [ 2.908686] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.914447] ohci-pci: OHCI PCI platform driver [ 2.919010] ohci-platform: OHCI generic platform driver [ 2.924954] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.930849] usbcore: registered new interface driver uas [ 2.935304] usbcore: registered new interface driver usb-storage [ 2.941180] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.947528] mousedev: PS/2 mouse device common for all mice [ 2.952210] usbcore: registered new interface driver xpad [ 2.960539] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.962951] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.970742] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.977248] i2c /dev entries driver [ 2.980917] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.986785] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.991907] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.997631] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.002605] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.008333] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.013785] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.027555] device-mapper: uevent: version 1.0.3 [ 3.028010] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.034109] cpuidle: Initializing cpuidle driver [ 3.038045] sdhci: Secure Digital Host Controller Interface driver [ 3.042795] sdhci: Copyright(c) Pierre Ossman [ 3.046646] Synopsys Designware Multimedia Card Interface Driver [ 3.053104] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.059007] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.059633] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.071946] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.090620] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.099703] vdd-1v0: supplied by regulator-dummy [ 3.105146] vdd-1v8-hs: supplied by regulator-dummy [ 3.109854] vdd-1v8-ls: supplied by regulator-dummy [ 3.114543] vdd-1v8-ao: supplied by regulator-dummy [ 3.118475] vddio-ddr-1v1: supplied by regulator-dummy [ 3.122821] vdd-rtc: supplied by regulator-dummy [ 3.124468] spmic-ldo1: supplied by regulator-dummy [ 3.125679] vdd-ao-3v3: supplied by regulator-dummy [ 3.131750] vddio-emmc-3v3: supplied by regulator-dummy [ 3.137946] spmic-ldo4: supplied by regulator-dummy [ 3.139118] vdd-usb-3v3: supplied by regulator-dummy [ 3.145164] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.151252] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.156814] spmic-ldo8: supplied by vdd-1v8-ls [ 3.158195] gpio-510 (gpio_default): hogged as output/high [ 3.159572] gpio-511 (gpio_default): hogged as output/high [ 3.165835] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.304718] max77686-rtc max77620-rtc: registered as rtc0 [ 3.306133] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.306433] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.041829] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.042910] hid: raw HID events driver (C) Jiri Kosina [ 4.043608] usbcore: registered new interface driver usbhid [ 4.043764] usbhid: USB HID core driver [ 4.045625] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.046737] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.033684] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.108948] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.073 ms) ÿá[ 4.131992] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.132665] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.134038] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.134912] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.136858] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.137529] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.138102] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.139328] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.139669] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.141563] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.148482] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.154390] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.159787] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.166951] denver_knobs_init:MTS_VERSION:55637613 [ 4.179454] t19x_cache tegra-cache: probed [ 4.182494] optee: probing for conduit method. [ 4.183395] optee: revision 3.16 (65cc2218) [ 4.184562] optee: dynamic shared memory is enabled [ 4.186772] optee: initialized driver [ 4.193607] nvpmodel: initialized successfully [ 4.194408] tegra_hv: get_hvd: not initialized yet [ 4.199187] user_ivc_mempool: hypervisor not present [ 4.205145] usbcore: registered new interface driver snd-usb-audio [ 4.211545] u32 classifier [ 4.213064] input device check on [ 4.216570] Actions configured [ 4.220062] Initializing XFRM netlink socket [ 4.225274] NET: Registered protocol family 10 [ 4.231489] Segment Routing with IPv6 [ 4.232494] NET: Registered protocol family 17 [ 4.236558] NET: Registered protocol family 15 [ 4.241180] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.254592] Bluetooth: RFCOMM socket layer initialized [ 4.259250] Bluetooth: RFCOMM ver 1.11 [ 4.263473] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.269104] Bluetooth: HIDP socket layer initialized [ 4.274742] 9pnet: Installing 9P2000 support [ 4.278499] Key type dns_resolver registered [ 4.284462] registered taskstats version 1 [ 4.287143] Loading compiled-in X.509 certificates [ 4.300149] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.303153] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.313212] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.315000] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.323368] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.332048] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.448933] tegra194-pcie 14160000.pcie: Link up [ 4.451717] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.451980] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.452123] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.452351] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.452541] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.452952] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.453385] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.465957] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.466470] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.466921] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.468478] pci 0004:01:00.0: supports D1 D2 [ 4.468640] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.478785] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.479074] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.479326] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.479736] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.479994] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.480164] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.483761] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.490852] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.499647] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.510083] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.514747] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.520373] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.527318] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.535982] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.537683] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.545850] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.554530] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.669423] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.670127] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.670362] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.670501] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.670736] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.670952] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.671333] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.671771] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.686925] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.687188] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.689212] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.690461] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.692023] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.693449] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.694360] pci 0005:00:00.0: Removing from iommu group 7 [ 5.694637] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.725039] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.745704] host1x 13e10000.host1x: initialized [ 5.747199] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.748102] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.749300] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.749969] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.750917] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.751533] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.752515] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.753169] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.763018] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.769656] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.779662] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.786449] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.796606] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.803582] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.813460] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.820197] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.830367] falcon 15340000.vic: Adding to iommu group 17 [ 5.845046] falcon 15340000.vic: initialized [ 5.845874] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.851191] falcon 15380000.nvjpg: initialized [ 5.851728] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.862913] falcon 154c0000.nvenc: initialized [ 5.863415] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.873069] falcon 15a80000.nvenc1: initialized [ 5.873632] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.886454] nvdec 15480000.nvdec: initialized [ 5.887067] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.896366] nvdec 15140000.nvdec1: initialized [ 5.897006] tsec 15500000.tsec: Adding to iommu group 18 [ 5.902303] tsec 15500000.tsec: initialized [ 5.902793] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.910293] tsec 15100000.tsecb: initialized [ 5.913724] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.939021] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.951492] gpio-374 (wifi-enable): hogged as output/high [ 5.951778] gpio-431 (camera-control-output-low): hogged as output/low [ 5.952037] gpio-432 (camera-control-output-low): hogged as output/low [ 5.953530] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.955084] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.955519] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.961491] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.967130] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.972558] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.978419] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.986638] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.994121] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.005665] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.010508] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.016661] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.025297] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.034556] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.042094] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.049603] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.055625] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.065474] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.071861] pva 16000000.pva0: Adding to iommu group 22 [ 6.098743] pva 16000000.pva0: initialized [ 6.103078] pva 16800000.pva1: Adding to iommu group 23 [ 6.113544] pva 16800000.pva1: initialized [ 6.117694] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.138496] nvdla 15880000.nvdla0: initialized [ 6.140065] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.148719] nvdla 158c0000.nvdla1: initialized [ 6.150919] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.151205] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.151487] tegradccommon 15200000.display-hub: dma mapping done [ 6.153240] tegradc 15200000.display: Adding to iommu group 26 [ 6.160571] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.160992] generic_infoframe_type: 0x87 [ 6.161211] tegradc 15200000.display: DT parsed successfully [ 6.161540] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.163639] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.165044] tegradc 15210000.display: Adding to iommu group 26 [ 6.167924] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.174603] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.187674] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.187726] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.196151] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.203030] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.210923] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.215291] tegra_cec 3960000.tegra_cec: probed [ 6.216158] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.221512] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.226331] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.233469] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.239608] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.247976] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.255417] kfuse 3830000.kfuse: initialized [ 6.262395] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.269323] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.274962] tegradc 15210000.display: disp0 connected to head1->sor [ 6.280194] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.280947] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.286756] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.305323] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.312392] tegradc 15210000.display: DT parsed successfully [ 6.322480] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.326954] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.340790] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.350353] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.355785] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.375689] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.376023] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.379208] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.387864] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.396359] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.403132] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.410582] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.417754] usb usb1: Product: xHCI Host Controller [ 6.422419] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.428814] usb usb1: SerialNumber: 3610000.xhci [ 6.434796] hub 1-0:1.0: USB hub found [ 6.437667] hub 1-0:1.0: 4 ports detected [ 6.442183] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.446714] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.454330] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.462368] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.469927] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.477372] usb usb2: Product: xHCI Host Controller [ 6.482085] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.488298] usb usb2: SerialNumber: 3610000.xhci [ 6.494345] hub 2-0:1.0: USB hub found [ 6.496887] hub 2-0:1.0: 4 ports detected [ 6.530065] random: crng init done [ 6.538686] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.544427] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.545912] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.546230] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.559276] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.560399] tegra194-cpufreq ccplex: probed with BWMGR [ 6.561781] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.562337] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.562835] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.564057] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.573297] mmc0: CQHCI version 5.10 [ 6.575681] tegra194-vi5 15c10000.vi: initialized [ 6.579072] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.580254] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.584074] generic_infoframe_type: 0x87 [ 6.584131] tegradc 15200000.display: DT parsed successfully [ 6.590799] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.594233] tegradc 15200000.display: Display dc.00000000f74aad93 registered with id=0 [ 6.599959] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.609559] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.615880] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.622599] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.622605] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.622778] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.630905] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.637752] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.646112] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.653668] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.653846] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.672818] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.687283] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.697637] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.703802] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.712778] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.718290] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.742054] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.742704] tegradc 15200000.display: probed [ 6.751864] nvethernet 2490000.ethernet: Macsec not supported [ 6.758977] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.767171] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.771159] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.778578] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.786609] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.793037] tegra-se-nvhost 15810000.se: initialized [ 6.802853] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.803645] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.809193] Console: switching to colour frame buffer device 240x67 [ 6.809667] tegra-se-nvhost 15820000.se: initialized [ 6.814938] tegradc 15200000.display: fb registered [ 6.815009] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.821931] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.837096] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.843712] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.843991] tegra-se-nvhost 15830000.se: initialized [ 6.853824] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.854965] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.866362] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.872236] mmc0: Command Queue Engine enabled [ 6.873455] tegra-se-nvhost 15840000.se: initialized [ 6.876099] mmc0: periodic cache flush enabled [ 6.882972] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.885808] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.886342] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.893643] tegra_actmon d230000.actmon: in actmon_register()... [ 6.898567] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.916452] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.922518] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.930543] hvc_sysfs: hypervisor is not present [ 6.932795] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.934683] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.946268] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.959666] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.959948] ALSA device list: [ 6.966832] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.966837] usb 1-2: Manufacturer: Generic [ 6.978596] No soundcards found. [ 6.982430] hub 1-2:1.0: USB hub found [ 6.987204] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.987367] hub 1-2:1.0: 4 ports detected [ 6.993973] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.007071] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.012951] Extcon AUX1(HDMI) enable [ 7.017032] tegradc 15210000.display: disp1 connected to head1->sor [ 7.022994] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.030336] tegradc 15210000.display: DT parsed successfully [ 7.035921] tegradc 15210000.display: Display dc.000000004e82bf47 registered with id=1 [ 7.043606] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.049694] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.057698] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.062875] tegradc 15210000.display: probed [ 7.067907] tegradc 15210000.display: fb registered [ 7.076181] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.080054] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.081903] Freeing unused kernel memory: 3968K [ 7.087860] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.097908] tegradc 15210000.display: blank - powerdown [ 7.103258] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.109051] Run /init as init process [ 7.111470] Extcon DP: HPD disabled [ 7.111475] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.111485] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.111495] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.115041] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.115047] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.115051] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.115055] usb 2-3: Manufacturer: Generic [ 7.167288] hub 2-3:1.0: USB hub found [ 7.169310] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.178426] tegradc 15200000.display: blank - powerdown [ 7.218761] Root device found: mmcblk0p1 [ 7.220834] Found dev node: /dev/mmcblk0p1 [ 7.221398] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.221403] Extcon AUX1(HDMI) disable [ 7.236812] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.241809] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.242691] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.256015] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.256435] tegradc 15200000.display: unblank [ 7.258711] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.258919] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.259906] Rootfs mounted over mmcblk0p1 [ 7.264796] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.264815] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.264840] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.266690] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.270735] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.270740] Extcon AUX1(HDMI) enable [ 7.283484] tegradc 15200000.display: sync windows ret = 247 [ 7.288533] Switching from initrd to actual rootfs [ 7.319260] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.322564] Extcon HDMI: HPD enabled [ 7.325970] tegradc 15200000.display: hdmi: plugged [ 7.386123] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.387560] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.388968] usb 1-3: Product: Bluetooth Radio [ 7.390261] usb 1-3: Manufacturer: Realtek [ 7.391556] usb 1-3: SerialNumber: 00e04c000001 [ 7.470738] systemd[1]: System time before build time, advancing clock. [ 7.540657] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.545575] systemd[1]: Detected architecture arm64. [ 7.593171] systemd[1]: Set hostname to . [ 7.758145] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.111888] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.113691] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.119425] systemd[1]: Created slice system-modprobe.slice. [ 8.124189] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.128264] systemd[1]: Created slice User and Session Slice. [ 8.131696] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.135705] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.138916] systemd[1]: Reached target User and Group Name Lookups. [ 8.142025] systemd[1]: Reached target Slices. [ 8.145025] systemd[1]: Reached target Swap. [ 8.149020] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.152552] systemd[1]: Listening on Syslog Socket. [ 8.156019] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.159314] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.163421] systemd[1]: Listening on Journal Audit Socket. [ 8.166928] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.170625] systemd[1]: Listening on Journal Socket. [ 8.174351] systemd[1]: Listening on udev Control Socket. [ 8.177896] systemd[1]: Listening on udev Kernel Socket. [ 8.187657] systemd[1]: Mounting Huge Pages File System... [ 8.197299] systemd[1]: Mounting POSIX Message Queue File System... [ 8.205277] systemd[1]: Mounting RPC Pipe File System... [ 8.213649] systemd[1]: Mounting Kernel Debug File System... [ 8.222196] systemd[1]: Mounting Kernel Trace File System... [ 8.232067] systemd[1]: Starting Journal Service... [ 8.241085] systemd[1]: Starting Set the console keyboard layout... [ 8.249090] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.252482] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.258985] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.267119] systemd[1]: Started Nameserver information manager. [ 8.272704] systemd[1]: Reached target Network (Pre). [ 8.280322] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.282404] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.290327] systemd[1]: Starting Load Kernel Modules... [ 8.297948] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.306443] systemd[1]: Starting udev Coldplug all Devices... [ 8.316816] systemd[1]: Mounted Huge Pages File System. [ 8.320509] systemd[1]: Mounted POSIX Message Queue File System. [ 8.325227] systemd[1]: Mounted RPC Pipe File System. [ 8.326951] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.332819] systemd[1]: Mounted Kernel Debug File System. [ 8.335505] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.336288] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.338619] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.338633] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.338637] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.338873] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.339089] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.339250] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.339268] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.349832] systemd[1]: Mounted Kernel Trace File System. [ 8.359625] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.366074] systemd[1]: nvfb-udev.service: Succeeded. [ 8.370782] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.383121] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.395865] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.398500] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.405233] systemd[1]: Starting Load/Save Random Seed... [ 8.413702] systemd[1]: Starting Create System Users... [ 8.444486] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.444486] [ 8.459100] systemd[1]: Finished Load/Save Random Seed. [ 8.470766] systemd[1]: Finished Create System Users. [ 8.477905] systemd[1]: Finished Load Kernel Modules. [ 8.482434] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.489202] systemd[1]: Mounting Kernel Configuration File System... [ 8.496844] systemd[1]: Started OP-TEE Client Supplicant. [ 8.505276] systemd[1]: Starting Apply Kernel Variables... [ 8.514477] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.525053] systemd[1]: Finished Set the console keyboard layout. [ 8.529165] systemd[1]: Mounted Kernel Configuration File System. [ 9.953939] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.960443] imx219 9-0010: board setup failed [ 9.961886] imx219: probe of 9-0010 failed with error -121 [ 9.974025] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.980426] imx219 10-0010: board setup failed [ 9.981865] imx219: probe of 10-0010 failed with error -121 [ 10.085880] hot-surface-alert cooling state: 0 -> 1 [ 10.914098] using random self ethernet address [ 10.915376] using random host ethernet address [ 11.809276] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.811819] Creating 1 MTD partitions on "spi6.0": [ 11.814005] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.421938] using random self ethernet address [ 12.423498] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.838647] nvidia: loading out-of-tree module taints kernel. [ 59.170395] watchdog: watchdog0: watchdog did not stop! [ 59.634743] Trying to unregister non-registered hwtime source [ 62.698738] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.700182] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:9ùÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aÿâclk_dt_late initialized ÿäuÿânoc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 202ÿâavfs_clk_platform_post initialized ÿä2 aÿâcvc_late initialized regulator_post initialized ÿäarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNIÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäNG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.418] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.605] W> set volts not configured for 'vdd-1v8-hs' [0003.606] I> retrieved tmds range from prod_list_hdmi_soc [0003.611] E> invalid display type [0003.612] E> cannot find any other nvdisp nodes [0003.628] I> edid read success [0003.641] I> edid read success [0003.641] I> width = 640, height = 480, frequency = 25174825 [0003.642] I> width = 1920, height = 1080, frequency = 148500000 [0003.642] I> width = 1280, height = 768, frequency = 79500000 [0003.642] I> width = 1360, height = 768, frequency = 85500000 [0003.643] I> width = 720, height = 480, frequency = 26973026 [0003.647] I> width = 720, height = 576, frequency = 26973026 [0003.652] I> width = 1280, height = 720, frequency = 74175824 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1920, height = 1080, frequency = 148351648 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 720, height = 480, frequency = 26973026 [0003.680] I> width = 720, height = 576, frequency = 26973026 [0003.686] I> width = 3840, height = 2160, frequency = 296703296 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 4096, height = 2160, frequency = 296703296 [0003.715] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.726] I> hdmi_enable, starting HDMI initialisation [0003.731] I> hdmi_enable, HDMI initialisation complete [0003.740] initializing target [0003.741] calling apps_init() [0003.742] starting app kernel_boot_app [0003.742] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000808] Console: colour dummy device 80x25 [ 0.002384] printk: console [tty0] enabled [ 0.002448] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002507] pid_max: default: 32768 minimum: 301 [ 0.002701] LSM: Security Framework initializing [ 0.002762] Yama: becoming mindful. [ 0.002828] SELinux: Initializing. [ 0.003005] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003044] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005983] rcu: Hierarchical SRCU implementation. [ 0.006271] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007547] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007606] DTB Build time: Aug 10 2022 20:31:49 [ 0.012007] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.012257] Remapping and enabling EFI services. [ 0.014118] smp: Bringing up secondary CPUs ... [ 0.044043] Detected PIPT I-cache on CPU1 [ 0.044122] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073926] Detected PIPT I-cache on CPU2 [ 0.074005] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103580] Detected PIPT I-cache on CPU3 [ 0.103737] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133529] Detected PIPT I-cache on CPU4 [ 0.133607] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163214] Detected PIPT I-cache on CPU5 [ 0.163283] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163663] smp: Brought up 1 node, 6 CPUs [ 0.163957] SMP: Total of 6 processors activated. [ 0.164005] CPU features: detected: Privileged Access Never [ 0.164052] CPU features: detected: LSE atomic instructions [ 0.164071] CPU features: detected: User Access Override [ 0.164089] CPU features: detected: 32-bit EL0 Support [ 0.164105] CPU features: detected: RAS Extension Support [ 0.164123] CPU features: detected: CRC32 instructions [ 0.164142] CPU features: detected: 32-bit EL1 Support [ 0.232520] CPU: All CPU(s) started at EL2 [ 0.237731] devtmpfs: initialized [ 0.286416] Registered cp15_barrier emulation handler [ 0.286545] Registered setend emulation handler [ 0.286572] KASLR enabled [ 0.286797] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286834] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288089] pinctrl core: initialized pinctrl subsystem [ 0.289236] SMBIOS 3.0.0 present. [ 0.289300] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289950] NET: Registered protocol family 16 [ 0.291796] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292309] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293007] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.293074] audit: initializing netlink subsys (disabled) [ 0.293349] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293781] thermal_sys: Registered thermal governor 'step_wise' [ 0.293788] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293809] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295779] cpuidle: using governor menu [ 0.296091] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296497] ASID allocator initialised with 32768 entries [ 0.296708] Serial: AMBA PL011 UART driver [ 0.300017] Tegra reboot handler registered. [ 0.364577] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.364706] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.364898] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.364952] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.365092] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.365145] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.365298] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.365344] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.365472] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.365519] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.367882] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.367927] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.367983] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.368018] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.368069] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.368103] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.368145] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.368203] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.368233] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.368268] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.368298] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.368328] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.368357] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.368386] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.368416] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.368446] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.368475] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.368646] mc-err: mcerr ops are set to t19x [ 0.379976] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.380008] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.380027] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.380046] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.387135] ACPI: Interpreter disabled. [ 0.388396] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.389758] iommu: Default domain type: Translated [ 0.389827] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.390189] SCSI subsystem initialized [ 0.390359] usbcore: registered new interface driver usbfs [ 0.390403] usbcore: registered new interface driver hub [ 0.390463] usbcore: registered new device driver usb [ 0.390892] mc: Linux media interface: v0.10 [ 0.390925] videodev: Linux video capture interface: v2.00 [ 0.391211] pps_core: LinuxPPS API ver. 1 registered [ 0.391228] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.391256] PTP clock support registered [ 0.391457] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.391817] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.391926] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.392516] Registered efivars operations [ 0.398211] FPGA manager framework [ 0.398322] Advanced Linux Sound Architecture Driver Initialized. [ 0.398933] Bluetooth: Core ver 2.22 [ 0.398978] NET: Registered protocol family 31 [ 0.398993] Bluetooth: HCI device and connection manager initialized [ 0.399014] Bluetooth: HCI socket layer initialized [ 0.399035] Bluetooth: L2CAP socket layer initialized [ 0.399061] Bluetooth: SCO socket layer initialized [ 0.400708] camchar: rtcpu character device driver loaded [ 0.401524] clocksource: Switched to clocksource arch_sys_counter [ 0.828597] VFS: Disk quotas dquot_6.6.0 [ 0.828703] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.829178] pnp: PnP ACPI: disabled [ 0.842563] la/ptsa driver initialized. [ 0.842713] NET: Registered protocol family 2 [ 0.842918] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.851959] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.852144] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.852522] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.853157] TCP: Hash tables configured (established 65536 bind 65536) [ 0.853336] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.853564] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.853897] NET: Registered protocol family 1 [ 0.854510] RPC: Registered named UNIX socket transport module. [ 0.854546] RPC: Registered udp transport module. [ 0.854566] RPC: Registered tcp transport module. [ 0.854588] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.854616] PCI: CLS 0 bytes, default 64 [ 0.854929] Trying to unpack rootfs image as initramfs... [ 1.116255] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.119354] Freeing initrd memory: 8196K [ 1.123679] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.123732] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.123806] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.124193] kvm [1]: IPA Size Limit: 40 bits [ 1.124695] kvm [1]: vgic interrupt IRQ9 [ 1.125167] kvm [1]: VHE mode initialized successfully [ 1.126660] Initialise system trusted keyrings [ 1.126979] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.132818] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.133723] NFS: Registering the id_resolver key type [ 1.133792] Key type id_resolver registered [ 1.133812] Key type id_legacy registered [ 1.133908] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.133943] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.133992] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.144038] NET: Registered protocol family 38 [ 1.144067] Key type asymmetric registered [ 1.144088] Asymmetric key parser 'x509' registered [ 1.144165] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.144425] io scheduler mq-deadline registered [ 1.144458] io scheduler kyber registered [ 1.150338] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.153525] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.153687] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.153782] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.153872] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.153960] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.160477] scrncapt: init (heads:4 wins:6 planes:4) [ 1.160527] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.161610] EINJ: ACPI disabled. [ 1.165991] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.166030] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.166052] tegra-pmc: ### PMC reset level: L1 [ 1.166072] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.166132] tegra-pmc: PMC Prod config success [ 1.172342] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.179256] random: fast init done [ 1.179326] printk: console [ttyTCU0] enabled [ 2.731354] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.735495] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.740064] arm-smmu 10000000.iommu: stage 1 translation [ 2.745939] arm-smmu 10000000.iommu: stage 2 translation [ 2.751054] arm-smmu 10000000.iommu: nested translation [ 2.756385] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.763564] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.773602] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.776917] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.783249] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.791029] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.796284] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.801009] arm-smmu 12000000.iommu: stage 1 translation [ 2.806777] arm-smmu 12000000.iommu: stage 2 translation [ 2.811970] arm-smmu 12000000.iommu: nested translation [ 2.817394] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.824812] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.834519] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.837672] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.844488] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.851916] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.861255] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.864668] tegra_profiler: auth: init [ 2.868904] THERMAL EST: found 3 subdevs [ 2.872335] THERMAL EST num_resources: 0 [ 2.876192] [THERMAL EST subdev 0] [ 2.879753] [THERMAL EST subdev 1] [ 2.882902] [THERMAL EST subdev 2] [ 2.886413] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.892642] THERMAL EST: thz register success. [ 2.896847] THERMAL EST: end of probe, return err: 0 [ 2.902128] nvsciipc: loaded module [ 2.909686] tun: Universal TUN/TAP device driver, 1.6 [ 2.911913] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.918172] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.923716] e1000e: Intel(R) PRO/1000 Network Driver [ 2.928404] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.934478] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.940044] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.946179] PPP generic driver version 2.4.2 [ 2.950469] PPP BSD Compression module registered [ 2.955021] PPP Deflate Compression module registered [ 2.960262] PPP MPPE Compression module registered [ 2.965021] usbcore: registered new interface driver r8152 [ 2.970791] usbcore: registered new interface driver asix [ 2.975856] usbcore: registered new interface driver ax88179_178a [ 2.982247] usbcore: registered new interface driver cdc_ether [ 2.987933] usbcore: registered new interface driver net1080 [ 2.993790] usbcore: registered new interface driver cdc_subset [ 2.999571] usbcore: registered new interface driver zaurus [ 3.005526] usbcore: registered new interface driver cdc_ncm [ 3.011208] usbcore: registered new interface driver aqc111 [ 3.016847] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.022660] ohci-pci: OHCI PCI platform driver [ 3.027215] ohci-platform: OHCI generic platform driver [ 3.032801] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.039139] usbcore: registered new interface driver uas [ 3.043266] usbcore: registered new interface driver usb-storage [ 3.049671] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.055360] mousedev: PS/2 mouse device common for all mice [ 3.060700] usbcore: registered new interface driver xpad [ 3.068451] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.071191] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.078935] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.085487] i2c /dev entries driver [ 3.088835] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.094628] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.100169] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.105597] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.110714] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.116482] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.121609] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.135208] device-mapper: uevent: version 1.0.3 [ 3.135685] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.142139] cpuidle: Initializing cpuidle driver [ 3.146252] sdhci: Secure Digital Host Controller Interface driver [ 3.151017] sdhci: Copyright(c) Pierre Ossman [ 3.154882] Synopsys Designware Multimedia Card Interface Driver [ 3.161091] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.167315] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.168136] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.180337] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.204131] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.213671] vdd-1v0: supplied by regulator-dummy [ 3.219206] vdd-1v8-hs: supplied by regulator-dummy [ 3.224041] vdd-1v8-ls: supplied by regulator-dummy [ 3.228816] vdd-1v8-ao: supplied by regulator-dummy [ 3.232753] vddio-ddr-1v1: supplied by regulator-dummy [ 3.237157] vdd-rtc: supplied by regulator-dummy [ 3.238954] spmic-ldo1: supplied by regulator-dummy [ 3.240148] vdd-ao-3v3: supplied by regulator-dummy [ 3.246288] vddio-emmc-3v3: supplied by regulator-dummy [ 3.252792] spmic-ldo4: supplied by regulator-dummy [ 3.254098] vdd-usb-3v3: supplied by regulator-dummy [ 3.260252] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.266576] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.272106] spmic-ldo8: supplied by vdd-1v8-ls [ 3.273618] gpio-510 (gpio_default): hogged as output/high [ 3.275038] gpio-511 (gpio_default): hogged as output/high [ 3.277894] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.413542] max77686-rtc max77620-rtc: registered as rtc0 [ 3.414617] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.414961] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.225602] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.226805] hid: raw HID events driver (C) Jiri Kosina [ 4.227712] usbcore: registered new interface driver usbhid [ 4.227868] usbhid: USB HID core driver [ 4.230077] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.231439] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.317912] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.391847] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.744 ms) ÿá[ 4.315438] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.315901] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.317052] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.317803] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.319516] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.320262] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.320853] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.322527] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.322828] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.325225] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.332298] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.338537] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.343370] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.350188] denver_knobs_init:MTS_VERSION:55637613 [ 4.362190] t19x_cache tegra-cache: probed [ 4.365067] optee: probing for conduit method. [ 4.366068] optee: revision 3.16 (65cc2218) [ 4.366980] optee: dynamic shared memory is enabled [ 4.370793] optee: initialized driver [ 4.377706] nvpmodel: initialized successfully [ 4.378260] tegra_hv: get_hvd: not initialized yet [ 4.382999] user_ivc_mempool: hypervisor not present [ 4.388883] usbcore: registered new interface driver snd-usb-audio [ 4.395554] u32 classifier [ 4.396428] input device check on [ 4.400249] Actions configured [ 4.404075] Initializing XFRM netlink socket [ 4.408992] NET: Registered protocol family 10 [ 4.415189] Segment Routing with IPv6 [ 4.416279] NET: Registered protocol family 17 [ 4.420300] NET: Registered protocol family 15 [ 4.424961] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.438475] Bluetooth: RFCOMM socket layer initialized [ 4.443250] Bluetooth: RFCOMM ver 1.11 [ 4.446907] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.452793] Bluetooth: HIDP socket layer initialized [ 4.458639] 9pnet: Installing 9P2000 support [ 4.462183] Key type dns_resolver registered [ 4.467759] registered taskstats version 1 [ 4.470866] Loading compiled-in X.509 certificates [ 4.483953] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.486530] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.497304] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.498898] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.507169] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.515906] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.633515] tegra194-pcie 14160000.pcie: Link up [ 4.636592] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.636866] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.637060] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.637327] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.637621] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.638144] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.638578] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.651672] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.652147] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.652594] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.654287] pci 0004:01:00.0: supports D1 D2 [ 4.654480] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.678505] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.678921] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.679309] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.679900] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.680299] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.680599] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.680962] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.681258] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.684412] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.695184] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.699166] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.704574] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.712053] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.720858] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.722295] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.730446] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.739271] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.845596] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.846048] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.846317] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.846533] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.846880] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.847085] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.847508] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.847975] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.872424] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.872788] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.874709] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.875850] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.877608] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.879264] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.880250] pci 0005:00:00.0: Removing from iommu group 7 [ 5.880569] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.916375] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.945460] host1x 13e10000.host1x: initialized [ 5.947864] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.948897] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.950889] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.951913] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.953308] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.954133] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.955346] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.956064] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.957106] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.957963] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.958885] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.962646] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.972570] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.979646] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.989703] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.996549] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.006808] falcon 15340000.vic: Adding to iommu group 17 [ 6.021822] falcon 15340000.vic: initialized [ 6.023061] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.028650] falcon 15380000.nvjpg: initialized [ 6.029292] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.039381] falcon 154c0000.nvenc: initialized [ 6.039974] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.049616] falcon 15a80000.nvenc1: initialized [ 6.050263] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.063073] nvdec 15480000.nvdec: initialized [ 6.063630] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.074005] nvdec 15140000.nvdec1: initialized [ 6.074574] tsec 15500000.tsec: Adding to iommu group 18 [ 6.080014] tsec 15500000.tsec: initialized [ 6.080516] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.086950] tsec 15100000.tsecb: initialized [ 6.091173] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.121383] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.135243] gpio-374 (wifi-enable): hogged as output/high [ 6.135545] gpio-431 (camera-control-output-low): hogged as output/low [ 6.135877] gpio-432 (camera-control-output-low): hogged as output/low [ 6.138085] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.140169] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.140736] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.142433] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.143667] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.149397] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.155090] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.163598] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.170349] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.182372] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.186988] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.192879] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.201501] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.211005] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.218614] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.226453] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.232160] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.241626] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.248011] pva 16000000.pva0: Adding to iommu group 22 [ 6.276199] pva 16000000.pva0: initialized [ 6.280547] pva 16800000.pva1: Adding to iommu group 23 [ 6.291591] pva 16800000.pva1: initialized [ 6.295389] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.309832] nvdla 15880000.nvdla0: initialized [ 6.311175] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.320214] nvdla 158c0000.nvdla1: initialized [ 6.323900] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.324247] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.324584] tegradc 15200000.display: Adding to iommu group 26 [ 6.324695] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.324886] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.325229] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.325334] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.329958] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.331567] tegradccommon 15200000.display-hub: dma mapping done [ 6.334165] tegradc 15210000.display: Adding to iommu group 26 [ 6.337247] tegra_cec 3960000.tegra_cec: probed [ 6.354635] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.362041] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.366298] kfuse 3830000.kfuse: initialized [ 6.371174] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.376964] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.383724] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.390304] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.399174] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.404794] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.414074] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.419427] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.424643] random: crng init done [ 6.440884] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.441334] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.445926] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.454486] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.463121] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.469437] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.477253] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.484422] usb usb1: Product: xHCI Host Controller [ 6.489165] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.495309] usb usb1: SerialNumber: 3610000.xhci [ 6.500953] hub 1-0:1.0: USB hub found [ 6.504065] hub 1-0:1.0: 4 ports detected [ 6.508556] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.513677] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.521003] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.528740] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.536872] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.544113] usb usb2: Product: xHCI Host Controller [ 6.548841] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.555072] usb usb2: SerialNumber: 3610000.xhci [ 6.560274] hub 2-0:1.0: USB hub found [ 6.563797] hub 2-0:1.0: 4 ports detected [ 6.604233] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.610827] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.612441] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.612737] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.626033] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.627126] tegra194-cpufreq ccplex: probed with BWMGR [ 6.628389] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.628754] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.629272] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.630694] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.638082] tegra194-vi5 15c10000.vi: initialized [ 6.639877] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.641138] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.643801] generic_infoframe_type: 0x87 [ 6.650152] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.654103] tegradc 15200000.display: DT parsed successfully [ 6.662259] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.662268] mmc0: CQHCI version 5.10 [ 6.667839] tegradc 15200000.display: Display dc.00000000a1ea3177 registered with id=0 [ 6.669232] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.674273] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.674280] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.674284] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.681538] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.685902] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.685907] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.686212] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.694133] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.694140] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.756112] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.761533] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.762782] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.770184] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.782513] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.789555] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.796040] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.802832] nvethernet 2490000.ethernet: Macsec not supported [ 6.816793] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.818942] tegradc 15200000.display: probed [ 6.825051] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.834120] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.841669] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.849439] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.856444] tegra-se-nvhost 15810000.se: initialized [ 6.864499] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.866290] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.872446] tegra-se-nvhost 15820000.se: initialized [ 6.878581] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.883477] Console: switching to colour frame buffer device 240x67 [ 6.883755] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.889112] tegradc 15200000.display: fb registered [ 6.889183] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.896168] tegra-se-nvhost 15830000.se: initialized [ 6.912199] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.917827] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.917948] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.923012] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.925775] mmc0: Command Queue Engine enabled [ 6.925780] mmc0: periodic cache flush enabled [ 6.925796] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.929441] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.929787] tegra-se-nvhost 15840000.se: initialized [ 6.931368] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.932940] tegra_actmon d230000.actmon: in actmon_register()... [ 6.933119] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.933554] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.934060] hvc_sysfs: hypervisor is not present [ 6.962162] ALSA device list: [ 6.971795] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.972293] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.972419] No soundcards found. [ 6.977633] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.977637] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.977642] usb 1-2: Manufacturer: Generic [ 6.979967] hub 1-2:1.0: USB hub found [ 6.996712] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.003040] hub 1-2:1.0: 4 ports detected [ 7.025223] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.054302] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.060943] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.069430] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.075725] Extcon AUX1(HDMI) enable [ 7.079679] tegradc 15210000.display: disp1 connected to head1->sor [ 7.085866] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.092863] tegradc 15210000.display: DT parsed successfully [ 7.098370] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.098609] tegradc 15210000.display: Display dc.00000000cda8637d registered with id=1 [ 7.114036] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 7.120341] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 7.133615] tegradc 15210000.display: probed [ 7.133965] tegradc 15210000.display: fb registered [ 7.139262] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.143219] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.145099] Freeing unused kernel memory: 3968K [ 7.150785] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.161227] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.169524] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.173716] Run /init as init process [ 7.176626] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.185122] tegradc 15210000.display: blank - powerdown [ 7.190194] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.190199] Extcon DP: HPD disabled [ 7.190203] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.190225] usb 2-3: Manufacturer: Generic [ 7.212855] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.218576] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.218675] tegradc 15200000.display: blank - powerdown [ 7.231078] hub 2-3:1.0: USB hub found [ 7.232959] hub 2-3:1.0: 4 ports detected [ 7.250872] Root device found: mmcblk0p1 [ 7.252885] Found dev node: /dev/mmcblk0p1 [ 7.258975] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.258983] Extcon AUX1(HDMI) disable [ 7.261508] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.282438] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.283376] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.289313] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.293583] Rootfs mounted over mmcblk0p1 [ 7.297228] tegradc 15200000.display: unblank [ 7.298502] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.298689] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.304832] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.306752] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.310764] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.310769] Extcon AUX1(HDMI) enable [ 7.323545] tegradc 15200000.display: sync windows ret = 247 [ 7.328592] Switching from initrd to actual rootfs [ 7.329516] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.365748] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.373117] Extcon HDMI: HPD enabled [ 7.376787] tegradc 15200000.display: hdmi: plugged [ 7.394051] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.395473] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.410734] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.412151] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.413622] usb 1-3: Product: Bluetooth Radio [ 7.414895] usb 1-3: Manufacturer: Realtek [ 7.418012] usb 1-3: SerialNumber: 00e04c000001 [ 7.532936] systemd[1]: System time before build time, advancing clock. [ 7.603053] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.608091] systemd[1]: Detected architecture arm64. [ 7.649519] systemd[1]: Set hostname to . [ 7.819586] systemd-sysv-generator[245]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.159804] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.161605] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.167553] systemd[1]: Created slice system-modprobe.slice. [ 8.172393] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.176476] systemd[1]: Created slice User and Session Slice. [ 8.179902] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.184053] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.187452] systemd[1]: Reached target User and Group Name Lookups. [ 8.190727] systemd[1]: Reached target Slices. [ 8.193790] systemd[1]: Reached target Swap. [ 8.197950] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.201588] systemd[1]: Listening on Syslog Socket. [ 8.205144] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.208615] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.212894] systemd[1]: Listening on Journal Audit Socket. [ 8.216591] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.220444] systemd[1]: Listening on Journal Socket. [ 8.224128] systemd[1]: Listening on udev Control Socket. [ 8.227698] systemd[1]: Listening on udev Kernel Socket. [ 8.236179] systemd[1]: Mounting Huge Pages File System... [ 8.246088] systemd[1]: Mounting POSIX Message Queue File System... [ 8.255960] systemd[1]: Mounting RPC Pipe File System... [ 8.264665] systemd[1]: Mounting Kernel Debug File System... [ 8.273383] systemd[1]: Mounting Kernel Trace File System... [ 8.283764] systemd[1]: Starting Journal Service... [ 8.292979] systemd[1]: Starting Set the console keyboard layout... [ 8.301586] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.305200] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.311841] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.320060] systemd[1]: Started Nameserver information manager. [ 8.325233] systemd[1]: Reached target Network (Pre). [ 8.332350] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.334411] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.340968] systemd[1]: Starting Load Kernel Modules... [ 8.349293] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.357310] systemd[1]: Starting udev Coldplug all Devices... [ 8.368596] systemd[1]: Mounted Huge Pages File System. [ 8.372401] systemd[1]: Mounted POSIX Message Queue File System. [ 8.376212] systemd[1]: Mounted RPC Pipe File System. [ 8.376951] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.382420] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.384787] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.385352] systemd[1]: Mounted Kernel Debug File System. [ 8.386465] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.389477] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.389482] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.389702] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.389846] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.390006] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.390013] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.401004] systemd[1]: Mounted Kernel Trace File System. [ 8.407552] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.414056] systemd[1]: nvfb-udev.service: Succeeded. [ 8.418787] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.431158] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.442997] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.444867] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.452632] systemd[1]: Starting Load/Save Random Seed... [ 8.462374] systemd[1]: Starting Create System Users... [ 8.505371] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.505371] [ 8.528710] systemd[1]: Finished Load/Save Random Seed. [ 8.539284] systemd[1]: Finished Load Kernel Modules. [ 8.545511] systemd[1]: Finished Create System Users. [ 8.550040] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.557111] systemd[1]: Mounting Kernel Configuration File System... [ 8.566086] systemd[1]: Started OP-TEE Client Supplicant. [ 8.574756] systemd[1]: Starting Apply Kernel Variables... [ 8.583373] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.594393] systemd[1]: Finished Set the console keyboard layout. [ 8.601420] systemd[1]: Mounted Kernel Configuration File System. [ 10.004709] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.011704] imx219 9-0010: board setup failed [ 10.013125] imx219: probe of 9-0010 failed with error -121 [ 10.029442] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.036587] imx219 10-0010: board setup failed [ 10.038031] imx219: probe of 10-0010 failed with error -121 [ 10.109747] hot-surface-alert cooling state: 0 -> 1 [ 10.781097] using random self ethernet address [ 10.782346] using random host ethernet address [ 11.618089] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.618095] Creating 1 MTD partitions on "spi6.0": [ 11.618118] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.242900] using random self ethernet address [ 12.244836] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.821231] nvidia: loading out-of-tree module taints kernel. [ 58.894984] watchdog: watchdog0: watchdog did not stop! [ 59.370381] Trying to unregister non-registered hwtime source [ 62.431615] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.433187] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.358] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized ÿä1ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä 03ÿâdmce initialized ÿä:ÿâcvc initialized ÿä23:20 UTC 20ÿâavfs_clk_mach_post initialized ÿä22 aÿâavfs_clk_platform_post initialized ÿäarcÿâcvc_late initialized regulator_post initialized ÿäh64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.643] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.644] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.645] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.688] I> width = 3840, height = 2160, frequency = 296703296 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.717] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.733] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.744] starting app kernel_boot_app [0003.745] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000723] Console: colour dummy device 80x25 [ 0.002253] printk: console [tty0] enabled [ 0.002317] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002375] pid_max: default: 32768 minimum: 301 [ 0.002590] LSM: Security Framework initializing [ 0.002652] Yama: becoming mindful. [ 0.002695] SELinux: Initializing. [ 0.002893] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002932] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006856] rcu: Hierarchical SRCU implementation. [ 0.007157] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.008152] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.008191] DTB Build time: Aug 10 2022 20:31:49 [ 0.011049] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011360] Remapping and enabling EFI services. [ 0.013912] smp: Bringing up secondary CPUs ... [ 0.042989] Detected PIPT I-cache on CPU1 [ 0.043049] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075695] Detected PIPT I-cache on CPU2 [ 0.075851] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105552] Detected PIPT I-cache on CPU3 [ 0.105697] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135477] Detected PIPT I-cache on CPU4 [ 0.135576] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.166462] Detected PIPT I-cache on CPU5 [ 0.166605] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.167009] smp: Brought up 1 node, 6 CPUs [ 0.167255] SMP: Total of 6 processors activated. [ 0.167272] CPU features: detected: Privileged Access Never [ 0.167299] CPU features: detected: LSE atomic instructions [ 0.167311] CPU features: detected: User Access Override [ 0.167324] CPU features: detected: 32-bit EL0 Support [ 0.167336] CPU features: detected: RAS Extension Support [ 0.167349] CPU features: detected: CRC32 instructions [ 0.167361] CPU features: detected: 32-bit EL1 Support [ 0.238031] CPU: All CPU(s) started at EL2 [ 0.244126] devtmpfs: initialized [ 0.291463] Registered cp15_barrier emulation handler [ 0.291585] Registered setend emulation handler [ 0.291607] KASLR enabled [ 0.291891] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291913] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.294161] pinctrl core: initialized pinctrl subsystem [ 0.295307] SMBIOS 3.0.0 present. [ 0.295340] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.295980] NET: Registered protocol family 16 [ 0.298223] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.298774] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.299614] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.299680] audit: initializing netlink subsys (disabled) [ 0.299987] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.300445] thermal_sys: Registered thermal governor 'step_wise' [ 0.300451] thermal_sys: Registered thermal governor 'power_allocator' [ 0.300465] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.302618] cpuidle: using governor menu [ 0.302965] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.303368] ASID allocator initialised with 32768 entries [ 0.303598] Serial: AMBA PL011 UART driver [ 0.307100] Tegra reboot handler registered. [ 0.378572] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.378674] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.378843] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.378898] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.379027] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.379062] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.379163] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.379197] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.379313] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.379365] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.381647] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.381680] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.381706] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.381732] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.381760] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.381784] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.381809] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.381834] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.381858] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.381882] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.381906] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.381930] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.381956] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.381981] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.382005] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.382030] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.382091] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.382182] mc-err: mcerr ops are set to t19x [ 0.394562] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.394587] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.394600] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.394612] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.401988] ACPI: Interpreter disabled. [ 0.403173] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.404355] iommu: Default domain type: Translated [ 0.404439] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.404785] SCSI subsystem initialized [ 0.404935] usbcore: registered new interface driver usbfs [ 0.404975] usbcore: registered new interface driver hub [ 0.405007] usbcore: registered new device driver usb [ 0.405369] mc: Linux media interface: v0.10 [ 0.405397] videodev: Linux video capture interface: v2.00 [ 0.405714] pps_core: LinuxPPS API ver. 1 registered [ 0.405726] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.405747] PTP clock support registered [ 0.405931] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.406303] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.406394] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.406940] Registered efivars operations [ 0.412307] FPGA manager framework [ 0.412414] Advanced Linux Sound Architecture Driver Initialized. [ 0.413005] Bluetooth: Core ver 2.22 [ 0.413059] NET: Registered protocol family 31 [ 0.413076] Bluetooth: HCI device and connection manager initialized [ 0.413092] Bluetooth: HCI socket layer initialized [ 0.413111] Bluetooth: L2CAP socket layer initialized [ 0.413153] Bluetooth: SCO socket layer initialized [ 0.414768] camchar: rtcpu character device driver loaded [ 0.415645] clocksource: Switched to clocksource arch_sys_counter [ 0.694655] VFS: Disk quotas dquot_6.6.0 [ 0.694727] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.695076] pnp: PnP ACPI: disabled [ 0.707493] la/ptsa driver initialized. [ 0.707615] NET: Registered protocol family 2 [ 0.707818] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.713856] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.713927] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.714225] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.714656] TCP: Hash tables configured (established 65536 bind 65536) [ 0.714801] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.714910] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.715098] NET: Registered protocol family 1 [ 0.715757] RPC: Registered named UNIX socket transport module. [ 0.715772] RPC: Registered udp transport module. [ 0.715781] RPC: Registered tcp transport module. [ 0.715790] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.715806] PCI: CLS 0 bytes, default 64 [ 0.716014] Trying to unpack rootfs image as initramfs... [ 0.904102] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.906170] Freeing initrd memory: 8196K [ 0.909976] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.910026] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.910063] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.910355] kvm [1]: IPA Size Limit: 40 bits [ 0.910814] kvm [1]: vgic interrupt IRQ9 [ 0.911344] kvm [1]: VHE mode initialized successfully [ 0.912671] Initialise system trusted keyrings [ 0.912920] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.917890] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.918635] NFS: Registering the id_resolver key type [ 0.918661] Key type id_resolver registered [ 0.918670] Key type id_legacy registered [ 0.918738] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.918754] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.918780] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.927846] NET: Registered protocol family 38 [ 0.927866] Key type asymmetric registered [ 0.927877] Asymmetric key parser 'x509' registered [ 0.927950] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.928164] io scheduler mq-deadline registered [ 0.928178] io scheduler kyber registered [ 0.932538] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.934550] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.934614] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.934666] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.934732] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.934797] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.938745] scrncapt: init (heads:4 wins:6 planes:4) [ 0.939205] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.939758] EINJ: ACPI disabled. [ 0.942035] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.942055] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.942065] tegra-pmc: ### PMC reset level: L1 [ 0.942074] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.942117] tegra-pmc: PMC Prod config success [ 0.946903] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.430445] random: fast init done [ 2.497680] printk: console [ttyTCU0] enabled [ 2.503030] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.508082] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.512870] arm-smmu 10000000.iommu: stage 1 translation [ 2.518127] arm-smmu 10000000.iommu: stage 2 translation [ 2.523647] arm-smmu 10000000.iommu: nested translation [ 2.528977] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.536419] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.545938] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.549546] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.555836] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.563351] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.568880] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.573600] arm-smmu 12000000.iommu: stage 1 translation [ 2.579110] arm-smmu 12000000.iommu: stage 2 translation [ 2.584793] arm-smmu 12000000.iommu: nested translation [ 2.589964] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.597151] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.606803] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.610288] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.617092] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.624380] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.634256] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.637256] tegra_profiler: auth: init [ 2.641651] THERMAL EST: found 3 subdevs [ 2.644923] THERMAL EST num_resources: 0 [ 2.649020] [THERMAL EST subdev 0] [ 2.652344] [THERMAL EST subdev 1] [ 2.655486] [THERMAL EST subdev 2] [ 2.659011] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.665376] THERMAL EST: thz register success. [ 2.669438] THERMAL EST: end of probe, return err: 0 [ 2.674879] nvsciipc: loaded module [ 2.681274] tun: Universal TUN/TAP device driver, 1.6 [ 2.684306] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.690758] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.696060] e1000e: Intel(R) PRO/1000 Network Driver [ 2.701261] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.707338] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.712635] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.718702] PPP generic driver version 2.4.2 [ 2.723119] PPP BSD Compression module registered [ 2.727355] PPP Deflate Compression module registered [ 2.732598] PPP MPPE Compression module registered [ 2.737608] usbcore: registered new interface driver r8152 [ 2.743376] usbcore: registered new interface driver asix [ 2.748703] usbcore: registered new interface driver ax88179_178a [ 2.754567] usbcore: registered new interface driver cdc_ether [ 2.760523] usbcore: registered new interface driver net1080 [ 2.766373] usbcore: registered new interface driver cdc_subset [ 2.772431] usbcore: registered new interface driver zaurus [ 2.778142] usbcore: registered new interface driver cdc_ncm [ 2.783532] usbcore: registered new interface driver aqc111 [ 2.789432] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.795292] ohci-pci: OHCI PCI platform driver [ 2.799551] ohci-platform: OHCI generic platform driver [ 2.805277] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.811554] usbcore: registered new interface driver uas [ 2.816113] usbcore: registered new interface driver usb-storage [ 2.822195] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.828161] mousedev: PS/2 mouse device common for all mice [ 2.833262] usbcore: registered new interface driver xpad [ 2.841101] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.843722] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.851587] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.858303] i2c /dev entries driver [ 2.861648] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.867151] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.872434] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.878159] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.883205] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.888947] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.894147] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.906453] device-mapper: uevent: version 1.0.3 [ 2.906816] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.914195] cpuidle: Initializing cpuidle driver [ 2.918356] sdhci: Secure Digital Host Controller Interface driver [ 2.923617] sdhci: Copyright(c) Pierre Ossman [ 2.927714] Synopsys Designware Multimedia Card Interface Driver [ 2.933856] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.939921] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.940449] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.953018] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.972471] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.981114] vdd-1v0: supplied by regulator-dummy [ 2.986408] vdd-1v8-hs: supplied by regulator-dummy [ 2.991018] vdd-1v8-ls: supplied by regulator-dummy [ 2.995690] vdd-1v8-ao: supplied by regulator-dummy [ 2.999483] vddio-ddr-1v1: supplied by regulator-dummy [ 3.003778] vdd-rtc: supplied by regulator-dummy [ 3.005350] spmic-ldo1: supplied by regulator-dummy [ 3.006414] vdd-ao-3v3: supplied by regulator-dummy [ 3.012395] vddio-emmc-3v3: supplied by regulator-dummy [ 3.018472] spmic-ldo4: supplied by regulator-dummy [ 3.019572] vdd-usb-3v3: supplied by regulator-dummy [ 3.025614] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.031666] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.037004] spmic-ldo8: supplied by vdd-1v8-ls [ 3.038334] gpio-510 (gpio_default): hogged as output/high [ 3.039597] gpio-511 (gpio_default): hogged as output/high [ 3.046834] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.185299] max77686-rtc max77620-rtc: registered as rtc0 [ 3.186544] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.186833] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.885205] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.886211] hid: raw HID events driver (C) Jiri Kosina [ 3.886854] usbcore: registered new interface driver usbhid [ 3.887007] usbhid: USB HID core driver [ 3.888628] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.889704] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.993712] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.069468] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.567 ms) ÿá[ 3.974865] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.975372] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.976419] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.977249] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.978789] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.979414] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.980072] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.981218] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.981524] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.983457] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.991045] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.997886] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.002469] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.009499] denver_knobs_init:MTS_VERSION:55637613 [ 4.022039] t19x_cache tegra-cache: probed [ 4.025078] optee: probing for conduit method. [ 4.026027] optee: revision 3.16 (65cc2218) [ 4.027406] optee: dynamic shared memory is enabled [ 4.029851] optee: initialized driver [ 4.035471] nvpmodel: initialized successfully [ 4.037735] tegra_hv: get_hvd: not initialized yet [ 4.042485] user_ivc_mempool: hypervisor not present [ 4.048191] usbcore: registered new interface driver snd-usb-audio [ 4.054436] u32 classifier [ 4.056432] input device check on [ 4.059956] Actions configured [ 4.063368] Initializing XFRM netlink socket [ 4.068218] NET: Registered protocol family 10 [ 4.074357] Segment Routing with IPv6 [ 4.075610] NET: Registered protocol family 17 [ 4.080207] NET: Registered protocol family 15 [ 4.084309] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.097845] Bluetooth: RFCOMM socket layer initialized [ 4.102610] Bluetooth: RFCOMM ver 1.11 [ 4.106763] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.112365] Bluetooth: HIDP socket layer initialized [ 4.118232] 9pnet: Installing 9P2000 support [ 4.121804] Key type dns_resolver registered [ 4.126911] registered taskstats version 1 [ 4.130456] Loading compiled-in X.509 certificates [ 4.142751] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.146223] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.156027] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.158388] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.166735] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.175424] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.291727] tegra194-pcie 14160000.pcie: Link up [ 4.294410] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.294623] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.294773] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.295033] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.295230] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.295588] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.296050] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.307269] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.307793] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.308261] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.309748] pci 0004:01:00.0: supports D1 D2 [ 4.309896] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.317905] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.318275] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.318582] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.319004] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.319247] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.320465] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.326525] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.333920] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.342294] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.352333] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.357133] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.362665] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.369532] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.379107] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.380450] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.388755] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.397361] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.503754] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.504479] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.504696] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.504847] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.505115] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.505355] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.505771] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.506217] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.522100] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.522448] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.524737] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.526167] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.527899] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.529265] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.530220] pci 0005:00:00.0: Removing from iommu group 7 [ 5.530495] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.561682] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.582278] host1x 13e10000.host1x: initialized [ 5.583604] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.584612] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.585663] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.586402] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.587446] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.588456] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.589614] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.590279] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.597102] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.604350] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.613997] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.620900] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.630532] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.637623] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.647482] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.654665] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.664710] falcon 15340000.vic: Adding to iommu group 17 [ 5.679020] falcon 15340000.vic: initialized [ 5.680272] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.685740] falcon 15380000.nvjpg: initialized [ 5.686486] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.697240] falcon 154c0000.nvenc: initialized [ 5.697888] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.707854] falcon 15a80000.nvenc1: initialized [ 5.708380] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.719537] nvdec 15480000.nvdec: initialized [ 5.720206] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.729333] nvdec 15140000.nvdec1: initialized [ 5.729776] tsec 15500000.tsec: Adding to iommu group 18 [ 5.735716] tsec 15500000.tsec: initialized [ 5.736241] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.744295] tsec 15100000.tsecb: initialized [ 5.747834] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.773356] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.784434] gpio-374 (wifi-enable): hogged as output/high [ 5.784738] gpio-431 (camera-control-output-low): hogged as output/low [ 5.784989] gpio-432 (camera-control-output-low): hogged as output/low [ 5.786441] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.788135] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.789064] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.795958] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.801472] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.807104] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.812655] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.820753] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.828427] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.839630] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.845107] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.850998] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.859895] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.868832] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.875952] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.883870] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.889899] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.899720] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.906020] pva 16000000.pva0: Adding to iommu group 22 [ 5.931785] pva 16000000.pva0: initialized [ 5.935543] pva 16800000.pva1: Adding to iommu group 23 [ 5.945558] pva 16800000.pva1: initialized [ 5.949345] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.962906] nvdla 15880000.nvdla0: initialized [ 5.964099] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.972425] nvdla 158c0000.nvdla1: initialized [ 5.975033] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.975300] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.975391] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.975605] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.976238] tegradccommon 15200000.display-hub: dma mapping done [ 5.976736] tegradc 15200000.display: Adding to iommu group 26 [ 5.976744] tegradc 15210000.display: Adding to iommu group 26 [ 5.977430] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.984932] tegradc 15210000.display: disp0 connected to head1->sor [ 5.990609] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 5.995516] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.002249] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.007596] tegradc 15210000.display: DT parsed successfully [ 6.015071] tegra_cec 3960000.tegra_cec: probed [ 6.020651] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.021109] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.027536] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.031166] generic_infoframe_type: 0x87 [ 6.041203] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.045235] tegradc 15200000.display: DT parsed successfully [ 6.051537] kfuse 3830000.kfuse: initialized [ 6.054797] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.061953] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.086468] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.093334] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.093593] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.101030] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.101037] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.115198] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.124025] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.129430] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.139853] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.150974] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.151528] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.170587] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.176665] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.176906] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.192525] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.195778] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.208161] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.213529] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.222179] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.230794] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.236924] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.244962] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.251916] usb usb1: Product: xHCI Host Controller [ 6.257118] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.263324] usb usb1: SerialNumber: 3610000.xhci [ 6.268687] hub 1-0:1.0: USB hub found [ 6.271898] hub 1-0:1.0: 4 ports detected [ 6.276091] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.281017] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.288894] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.296352] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.304473] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.311759] usb usb2: Product: xHCI Host Controller [ 6.316496] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.322674] usb usb2: SerialNumber: 3610000.xhci [ 6.328345] hub 2-0:1.0: USB hub found [ 6.331347] hub 2-0:1.0: 4 ports detected [ 6.368267] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.373397] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.374623] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.374836] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.387825] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.388842] tegra194-cpufreq ccplex: probed with BWMGR [ 6.390226] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.390877] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.391391] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.392649] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.406717] mmc0: CQHCI version 5.10 [ 6.408214] tegra194-vi5 15c10000.vi: initialized [ 6.410069] tegradc 15210000.display: disp0 connected to head1->sor [ 6.411182] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.414836] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.421530] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.428630] tegradc 15210000.display: DT parsed successfully [ 6.436343] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.441954] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.448574] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.456543] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.463070] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.463076] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.482864] generic_infoframe_type: 0x87 [ 6.486714] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.486736] tegradc 15200000.display: DT parsed successfully [ 6.493005] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.498856] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.505440] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.511697] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.514161] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.522094] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.527927] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.539680] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.543655] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.544004] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.552240] nvethernet 2490000.ethernet: Macsec not supported [ 6.558805] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.568301] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.573129] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.579799] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.599320] mmc0: Command Queue Engine enabled [ 6.603772] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.604519] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.604523] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.606730] tegradc 15200000.display: probed [ 6.609782] mmc0: periodic cache flush enabled [ 6.614176] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.621036] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.630190] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.637135] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.669338] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.669438] Console: switching to colour frame buffer device 240x67 [ 6.671120] tegra-se-nvhost 15810000.se: initialized [ 6.676337] tegradc 15200000.display: fb registered [ 6.681452] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.687825] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.692835] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.701211] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.719150] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.719613] tegra-se-nvhost 15820000.se: initialized [ 6.729587] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.731366] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.741579] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.742118] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.749923] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.749928] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.749937] usb 1-2: Manufacturer: Generic [ 6.757688] tegra-se-nvhost 15830000.se: initialized [ 6.778174] hub 1-2:1.0: USB hub found [ 6.779165] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.787621] hub 1-2:1.0: 4 ports detected [ 6.788157] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.798891] tegra-se-nvhost 15840000.se: initialized [ 6.804737] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.808916] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.818732] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.819571] tegra_actmon d230000.actmon: in actmon_register()... [ 6.825354] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.831699] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.844709] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.852289] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.860014] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.860660] hvc_sysfs: hypervisor is not present [ 6.866805] Extcon AUX1(HDMI) enable [ 6.866932] tegradc 15210000.display: disp1 connected to head1->sor [ 6.881744] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.885781] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.888659] tegradc 15210000.display: DT parsed successfully [ 6.897157] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.897163] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.897167] usb 2-3: Manufacturer: Generic [ 6.898393] ALSA device list: [ 6.902717] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.907851] hub 2-3:1.0: USB hub found [ 6.909958] No soundcards found. [ 6.910048] hub 2-3:1.0: 4 ports detected [ 6.915042] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.947911] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.954877] tegradc 15210000.display: probed [ 6.958884] tegradc 15210000.display: fb registered [ 6.966776] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.970747] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.972650] Freeing unused kernel memory: 3968K [ 6.978197] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.988100] tegradc 15210000.display: blank - powerdown [ 6.993610] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.999876] Run /init as init process [ 7.001637] Extcon DP: HPD disabled [ 7.003713] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.008544] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.008554] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.021939] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.034966] tegradc 15200000.display: blank - powerdown [ 7.039725] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.075995] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.076017] Extcon AUX1(HDMI) disable [ 7.099572] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.100512] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.104281] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.104287] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.112360] tegradc 15200000.display: unblank [ 7.113654] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.113846] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.119758] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.121666] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.125664] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.125668] Extcon AUX1(HDMI) enable [ 7.138415] tegradc 15200000.display: sync windows ret = 247 [ 7.153073] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.169111] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.169117] usb 1-3: Product: Bluetooth Radio [ 7.169120] usb 1-3: Manufacturer: Realtek [ 7.169124] usb 1-3: SerialNumber: 00e04c000001 [ 7.175175] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.181280] Extcon HDMI: HPD enabled [ 7.184957] tegradc 15200000.display: hdmi: plugged [ 7.225562] Root device found: mmcblk0p1 [ 7.229074] Found dev node: /dev/mmcblk0p1 [ 7.265150] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.270381] Rootfs mounted over mmcblk0p1 [ 7.306748] Switching from initrd to actual rootfs [ 7.450158] systemd[1]: System time before build time, advancing clock. [ 7.521399] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.526446] systemd[1]: Detected architecture arm64. [ 7.574671] systemd[1]: Set hostname to . [ 7.744724] systemd-sysv-generator[249]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.088130] random: systemd: uninitialized urandom read (16 bytes read) [ 8.089951] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.091628] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.097376] systemd[1]: Created slice system-modprobe.slice. [ 8.101192] random: systemd: uninitialized urandom read (16 bytes read) [ 8.103963] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.107216] random: systemd: uninitialized urandom read (16 bytes read) [ 8.110074] systemd[1]: Created slice User and Session Slice. [ 8.113684] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.117999] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.121613] systemd[1]: Reached target User and Group Name Lookups. [ 8.125005] systemd[1]: Reached target Slices. [ 8.128298] systemd[1]: Reached target Swap. [ 8.132541] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.136337] systemd[1]: Listening on Syslog Socket. [ 8.140082] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.143597] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.148013] systemd[1]: Listening on Journal Audit Socket. [ 8.151748] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.155576] systemd[1]: Listening on Journal Socket. [ 8.159462] systemd[1]: Listening on udev Control Socket. [ 8.164710] systemd[1]: Listening on udev Kernel Socket. [ 8.174429] systemd[1]: Mounting Huge Pages File System... [ 8.183197] systemd[1]: Mounting POSIX Message Queue File System... [ 8.191251] systemd[1]: Mounting RPC Pipe File System... [ 8.199745] systemd[1]: Mounting Kernel Debug File System... [ 8.208574] systemd[1]: Mounting Kernel Trace File System... [ 8.218702] systemd[1]: Starting Journal Service... [ 8.227539] systemd[1]: Starting Set the console keyboard layout... [ 8.235806] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.239356] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.245738] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.253997] systemd[1]: Started Nameserver information manager. [ 8.258646] systemd[1]: Reached target Network (Pre). [ 8.267432] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.269438] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.276355] systemd[1]: Starting Load Kernel Modules... [ 8.284285] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.292635] systemd[1]: Starting udev Coldplug all Devices... [ 8.303376] systemd[1]: Mounted Huge Pages File System. [ 8.307336] systemd[1]: Mounted POSIX Message Queue File System. [ 8.312873] systemd[1]: Mounted RPC Pipe File System. [ 8.315051] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.317508] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.318353] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.322377] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.322392] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.322396] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.322561] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.324079] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.330430] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.332222] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.333203] systemd[1]: Mounted Kernel Debug File System. [ 8.347247] systemd[1]: Mounted Kernel Trace File System. [ 8.355492] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.362864] systemd[1]: nvfb-udev.service: Succeeded. [ 8.366984] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.378994] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.391356] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.393493] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.399946] systemd[1]: Starting Load/Save Random Seed... [ 8.409245] systemd[1]: Starting Create System Users... [ 8.431384] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.431384] [ 8.466831] systemd[1]: Finished Create System Users. [ 8.473639] systemd[1]: Finished Load Kernel Modules. [ 8.478092] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.484992] systemd[1]: Mounting Kernel Configuration File System... [ 8.492990] systemd[1]: Started OP-TEE Client Supplicant. [ 8.501837] systemd[1]: Starting Apply Kernel Variables... [ 8.510021] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.520165] systemd[1]: Finished Set the console keyboard layout. [ 8.524469] systemd[1]: Mounted Kernel Configuration File System. [ 9.891683] random: crng init done [ 9.892909] random: 7 urandom warning(s) missed due to ratelimiting [ 10.074741] hot-surface-alert cooling state: 0 -> 1 [ 10.087742] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.096500] imx219 9-0010: board setup failed [ 10.096600] imx219: probe of 9-0010 failed with error -121 [ 10.110711] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.116731] imx219 10-0010: board setup failed [ 10.116815] imx219: probe of 10-0010 failed with error -121 [ 10.722160] using random self ethernet address [ 10.723344] using random host ethernet address [ 11.615688] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.616948] Creating 1 MTD partitions on "spi6.0": [ 11.616958] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.171048] using random self ethernet address [ 12.183576] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.812715] nvidia: loading out-of-tree module taints kernel. [ 59.089358] watchdog: watchdog0: watchdog did not stop! [ 59.580518] Trying to unregister non-registered hwtime source [ 62.638411] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.640065] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] tÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.340] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.341] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.342] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.342] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.343] I> dram_block larger than 80000000 [0002.345] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.357] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.360] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.210] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.211] I> CPU-BL Params @ 0xca020000 [0003.211] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.212] I> 2) Base:0xc9800000 Size:0x00200000 [0003.212] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.219] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.228] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.237] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.246] I> 11) Base:0x40000000 Size:0x00040000 [0003.250] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.255] I> 13) Base:0x40046000 Size:0x00002000 [0003.259] I> 14) Base:0x40048000 Size:0x00002000 [0003.264] I> 15) Base:0xaf000000 Size:0x00004000 [0003.268] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.277] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.286] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.295] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.304] I> 24) Base:0xcc000000 Size:0x02000000 [0003.308] I> 25) Base:0x40050000 Size:0x00002000 [0003.313] I> 26) Base:0x40040000 Size:0x00006000 [0003.317] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.322] I> 28) Base:0xc8400000 Size:0x00200000 [0003.326] I> 29) Base:0xc8800000 Size:0x00400000 [0003.331] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.335] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.344] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.353] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.362] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.371] I> 39) Base:0xb0000000 Size:0x08000000 [0003.375] I> 40) Base:0x00000000 Size:0x00000000 [0003.380] I> 41) Base:0x00000000 Size:0x00000000 [0003.384] I> 42) Base:0x00000000 Size:0x00000000 [0003.389] I> 43) Base:0x00000000 Size:0x00000000 [0003.393] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.402] GIC-SPI Target CPU: 0 [0003.405] Interrupts Init done [0003.408] calling constructors [0003.411] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.418] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.428] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.435] initializing platform [0003.438] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.447] I> Bl_dtb @0xadf00000 [0003.450] I> gpio framework initialized [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.473] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.499] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.517] I> QSPI source rate = 204000 Khz [0003.520] I> Requested rate for QSPI clock = 34000 Khz [0003.525] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.530] I> tx_clk_tap_delay : 0 [0003.533] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.544] I> Qspi initialized successfully [0003.544] I> qspi flash-0 params source = boot args [0003.549] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.557] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.566] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.575] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.631] I> edid read success [0003.643] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.644] I> width = 1920, height = 1080, frequency = 148500000 [0003.644] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.645] I> width = 720, height = 480, frequency = 26973026 [0003.649] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 720, height = 480, frequency = 26973026 [0003.683] I> width = 720, height = 576, frequency = 26973026 [0003.688] I> width = 3840, height = 2160, frequency = 296703296 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.717] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.733] I> hdmi_enable, HDMI initialisation complete [0003.743] initializing target [0003.743] calling apps_init() [0003.744] starting app kernel_boot_app [0003.745] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000696] Console: colour dummy device 80x25 [ 0.002184] printk: console [tty0] enabled [ 0.002243] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002280] pid_max: default: 32768 minimum: 301 [ 0.002497] LSM: Security Framework initializing [ 0.002555] Yama: becoming mindful. [ 0.002601] SELinux: Initializing. [ 0.002797] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002836] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005632] rcu: Hierarchical SRCU implementation. [ 0.005877] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006729] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006787] DTB Build time: Aug 10 2022 20:31:49 [ 0.009447] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009721] Remapping and enabling EFI services. [ 0.011776] smp: Bringing up secondary CPUs ... [ 0.041344] Detected PIPT I-cache on CPU1 [ 0.041457] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.076164] Detected PIPT I-cache on CPU2 [ 0.076317] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105929] Detected PIPT I-cache on CPU3 [ 0.106015] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135765] Detected PIPT I-cache on CPU4 [ 0.135933] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165591] Detected PIPT I-cache on CPU5 [ 0.165729] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166129] smp: Brought up 1 node, 6 CPUs [ 0.166331] SMP: Total of 6 processors activated. [ 0.166400] CPU features: detected: Privileged Access Never [ 0.166427] CPU features: detected: LSE atomic instructions [ 0.166442] CPU features: detected: User Access Override [ 0.166457] CPU features: detected: 32-bit EL0 Support [ 0.166472] CPU features: detected: RAS Extension Support [ 0.166485] CPU features: detected: CRC32 instructions [ 0.166500] CPU features: detected: 32-bit EL1 Support [ 0.238782] CPU: All CPU(s) started at EL2 [ 0.245228] devtmpfs: initialized [ 0.294131] Registered cp15_barrier emulation handler [ 0.294255] Registered setend emulation handler [ 0.294277] KASLR enabled [ 0.294535] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.294560] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.295854] pinctrl core: initialized pinctrl subsystem [ 0.296809] SMBIOS 3.0.0 present. [ 0.296857] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.297411] NET: Registered protocol family 16 [ 0.299488] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.300214] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.301130] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.301192] audit: initializing netlink subsys (disabled) [ 0.301477] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.301900] thermal_sys: Registered thermal governor 'step_wise' [ 0.301907] thermal_sys: Registered thermal governor 'power_allocator' [ 0.301922] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.304178] cpuidle: using governor menu [ 0.304474] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.304845] ASID allocator initialised with 32768 entries [ 0.305075] Serial: AMBA PL011 UART driver [ 0.308504] Tegra reboot handler registered. [ 0.388898] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.389013] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.389244] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.389306] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.389453] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.389494] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.389612] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.389652] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.389791] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.389831] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.392175] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.392238] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.392264] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.392289] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.392316] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.392361] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.392386] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.392410] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.392434] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.392458] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.392481] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.392505] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.392528] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.392551] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.392575] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.392600] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.392623] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.392720] mc-err: mcerr ops are set to t19x [ 0.406515] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.406541] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.406554] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.406567] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.413467] ACPI: Interpreter disabled. [ 0.414739] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.416093] iommu: Default domain type: Translated [ 0.416167] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.416565] SCSI subsystem initialized [ 0.416759] usbcore: registered new interface driver usbfs [ 0.416806] usbcore: registered new interface driver hub [ 0.416847] usbcore: registered new device driver usb [ 0.417278] mc: Linux media interface: v0.10 [ 0.417313] videodev: Linux video capture interface: v2.00 [ 0.417650] pps_core: LinuxPPS API ver. 1 registered [ 0.417665] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.417694] PTP clock support registered [ 0.417898] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.418228] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.418317] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.418951] Registered efivars operations [ 0.425638] FPGA manager framework [ 0.425750] Advanced Linux Sound Architecture Driver Initialized. [ 0.426326] Bluetooth: Core ver 2.22 [ 0.426384] NET: Registered protocol family 31 [ 0.426398] Bluetooth: HCI device and connection manager initialized [ 0.426414] Bluetooth: HCI socket layer initialized [ 0.426431] Bluetooth: L2CAP socket layer initialized [ 0.426484] Bluetooth: SCO socket layer initialized [ 0.428129] camchar: rtcpu character device driver loaded [ 0.428847] clocksource: Switched to clocksource arch_sys_counter [ 0.733055] VFS: Disk quotas dquot_6.6.0 [ 0.733123] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.733459] pnp: PnP ACPI: disabled [ 0.744984] la/ptsa driver initialized. [ 0.745104] NET: Registered protocol family 2 [ 0.745282] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.749915] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.750001] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.750287] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.750739] TCP: Hash tables configured (established 65536 bind 65536) [ 0.750884] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.750978] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.751159] NET: Registered protocol family 1 [ 0.751753] RPC: Registered named UNIX socket transport module. [ 0.751767] RPC: Registered udp transport module. [ 0.751777] RPC: Registered tcp transport module. [ 0.751787] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.751802] PCI: CLS 0 bytes, default 64 [ 0.752011] Trying to unpack rootfs image as initramfs... [ 0.941401] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.943735] Freeing initrd memory: 8196K [ 0.947625] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.947669] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.947720] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.948133] kvm [1]: IPA Size Limit: 40 bits [ 0.948824] kvm [1]: vgic interrupt IRQ9 [ 0.949558] kvm [1]: VHE mode initialized successfully [ 0.951367] Initialise system trusted keyrings [ 0.951768] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.959023] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.959985] NFS: Registering the id_resolver key type [ 0.960047] Key type id_resolver registered [ 0.960064] Key type id_legacy registered [ 0.960189] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.960215] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.960255] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.971317] NET: Registered protocol family 38 [ 0.971342] Key type asymmetric registered [ 0.971358] Asymmetric key parser 'x509' registered [ 0.971405] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.971663] io scheduler mq-deadline registered [ 0.971685] io scheduler kyber registered [ 0.978052] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.981203] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.981316] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.981439] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.981554] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.981638] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.987796] scrncapt: init (heads:4 wins:6 planes:4) [ 0.987892] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.989004] EINJ: ACPI disabled. [ 0.992586] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.992614] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.992630] tegra-pmc: ### PMC reset level: L1 [ 0.992647] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.992704] tegra-pmc: PMC Prod config success [ 0.999165] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.036277] random: fast init done [ 1.039247] printk: console [ttyTCU0] enabled [ 2.556996] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.561432] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.566060] arm-smmu 10000000.iommu: stage 1 translation [ 2.571498] arm-smmu 10000000.iommu: stage 2 translation [ 2.577260] arm-smmu 10000000.iommu: nested translation [ 2.582377] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.589803] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.600807] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.602923] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.609202] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.616982] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.622233] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.626959] arm-smmu 12000000.iommu: stage 1 translation [ 2.632725] arm-smmu 12000000.iommu: stage 2 translation [ 2.638156] arm-smmu 12000000.iommu: nested translation [ 2.643348] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.650780] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.661924] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.663856] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.670441] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.677915] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.687695] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.690905] tegra_profiler: auth: init [ 2.694889] THERMAL EST: found 3 subdevs [ 2.698566] THERMAL EST num_resources: 0 [ 2.702381] [THERMAL EST subdev 0] [ 2.705725] [THERMAL EST subdev 1] [ 2.708863] [THERMAL EST subdev 2] [ 2.712346] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.718814] THERMAL EST: thz register success. [ 2.722795] THERMAL EST: end of probe, return err: 0 [ 2.728118] nvsciipc: loaded module [ 2.735797] tun: Universal TUN/TAP device driver, 1.6 [ 2.737750] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.744117] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.749466] e1000e: Intel(R) PRO/1000 Network Driver [ 2.754614] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.760456] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.765756] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.771943] PPP generic driver version 2.4.2 [ 2.776170] PPP BSD Compression module registered [ 2.780738] PPP Deflate Compression module registered [ 2.785954] PPP MPPE Compression module registered [ 2.791255] usbcore: registered new interface driver r8152 [ 2.796514] usbcore: registered new interface driver asix [ 2.801810] usbcore: registered new interface driver ax88179_178a [ 2.807986] usbcore: registered new interface driver cdc_ether [ 2.813888] usbcore: registered new interface driver net1080 [ 2.819489] usbcore: registered new interface driver cdc_subset [ 2.825523] usbcore: registered new interface driver zaurus [ 2.831224] usbcore: registered new interface driver cdc_ncm [ 2.836909] usbcore: registered new interface driver aqc111 [ 2.842535] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.848882] ohci-pci: OHCI PCI platform driver [ 2.853170] ohci-platform: OHCI generic platform driver [ 2.859124] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.865208] usbcore: registered new interface driver uas [ 2.869526] usbcore: registered new interface driver usb-storage [ 2.875696] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.881382] mousedev: PS/2 mouse device common for all mice [ 2.886627] usbcore: registered new interface driver xpad [ 2.894723] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.897383] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.905169] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.911537] i2c /dev entries driver [ 2.914833] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.921116] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.926102] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.931608] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.936922] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.942173] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.947854] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.962581] device-mapper: uevent: version 1.0.3 [ 2.963078] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.968126] cpuidle: Initializing cpuidle driver [ 2.972357] sdhci: Secure Digital Host Controller Interface driver [ 2.976976] sdhci: Copyright(c) Pierre Ossman [ 2.980784] Synopsys Designware Multimedia Card Interface Driver [ 2.987294] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.992976] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.999264] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.006572] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.033451] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.043588] vdd-1v0: supplied by regulator-dummy [ 3.049140] vdd-1v8-hs: supplied by regulator-dummy [ 3.054181] vdd-1v8-ls: supplied by regulator-dummy [ 3.059102] vdd-1v8-ao: supplied by regulator-dummy [ 3.063306] vddio-ddr-1v1: supplied by regulator-dummy [ 3.067954] vdd-rtc: supplied by regulator-dummy [ 3.069885] spmic-ldo1: supplied by regulator-dummy [ 3.071194] vdd-ao-3v3: supplied by regulator-dummy [ 3.077720] vddio-emmc-3v3: supplied by regulator-dummy [ 3.084071] spmic-ldo4: supplied by regulator-dummy [ 3.085451] vdd-usb-3v3: supplied by regulator-dummy [ 3.091688] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.098103] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.103732] spmic-ldo8: supplied by vdd-1v8-ls [ 3.105318] gpio-510 (gpio_default): hogged as output/high [ 3.106676] gpio-511 (gpio_default): hogged as output/high [ 3.109703] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.245540] max77686-rtc max77620-rtc: registered as rtc0 [ 3.246636] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.246968] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.095258] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.096660] hid: raw HID events driver (C) Jiri Kosina [ 4.097689] usbcore: registered new interface driver usbhid [ 4.097829] usbhid: USB HID core driver [ 4.100101] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.101410] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.081856] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.155893] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.846 ms) ÿá[ 4.185510] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.186254] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.187468] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.188378] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.190793] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.191565] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.192248] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.194286] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.194673] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.197086] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.201435] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.207649] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.213387] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.220576] denver_knobs_init:MTS_VERSION:55637613 [ 4.233149] t19x_cache tegra-cache: probed [ 4.237600] optee: probing for conduit method. [ 4.238545] optee: revision 3.16 (65cc2218) [ 4.239737] optee: dynamic shared memory is enabled [ 4.241065] optee: initialized driver [ 4.248041] nvpmodel: initialized successfully [ 4.248749] tegra_hv: get_hvd: not initialized yet [ 4.252482] user_ivc_mempool: hypervisor not present [ 4.258821] usbcore: registered new interface driver snd-usb-audio [ 4.265548] u32 classifier [ 4.266328] input device check on [ 4.269784] Actions configured [ 4.273740] Initializing XFRM netlink socket [ 4.278585] NET: Registered protocol family 10 [ 4.285116] Segment Routing with IPv6 [ 4.285932] NET: Registered protocol family 17 [ 4.289953] NET: Registered protocol family 15 [ 4.294613] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.308101] Bluetooth: RFCOMM socket layer initialized [ 4.312916] Bluetooth: RFCOMM ver 1.11 [ 4.316551] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.322643] Bluetooth: HIDP socket layer initialized [ 4.328101] 9pnet: Installing 9P2000 support [ 4.332138] Key type dns_resolver registered [ 4.337409] registered taskstats version 1 [ 4.340473] Loading compiled-in X.509 certificates [ 4.354430] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.356450] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.367541] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.368449] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.376823] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.385439] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.500977] tegra194-pcie 14160000.pcie: Link up [ 4.503927] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.504182] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.504425] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.504652] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.504951] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.505312] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.505781] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.519520] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.519961] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.520444] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.522448] pci 0004:01:00.0: supports D1 D2 [ 4.522639] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.534562] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.534951] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.535292] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.535702] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.535998] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.536262] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.536505] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.543107] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.551731] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.562245] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.566748] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.572537] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.579222] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.588145] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.589542] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.597867] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.606584] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.721898] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.722571] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.722807] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.722963] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.723241] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.723469] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.723856] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.724322] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.743850] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.744107] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.746428] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.747820] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.749824] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.751645] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.752726] pci 0005:00:00.0: Removing from iommu group 7 [ 5.753233] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.789506] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.815226] host1x 13e10000.host1x: initialized [ 5.816784] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.817816] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.819192] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.819921] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.821533] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.822157] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.823221] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.823921] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.824970] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.825538] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.832204] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.838859] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.849169] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.855821] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.865702] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.873162] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.882953] falcon 15340000.vic: Adding to iommu group 17 [ 5.898323] falcon 15340000.vic: initialized [ 5.899476] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.905730] falcon 15380000.nvjpg: initialized [ 5.906447] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.916066] falcon 154c0000.nvenc: initialized [ 5.916730] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.926297] falcon 15a80000.nvenc1: initialized [ 5.926958] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.939053] nvdec 15480000.nvdec: initialized [ 5.939730] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.950050] nvdec 15140000.nvdec1: initialized [ 5.950663] tsec 15500000.tsec: Adding to iommu group 18 [ 5.956734] tsec 15500000.tsec: initialized [ 5.957355] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.963589] tsec 15100000.tsecb: initialized [ 5.968037] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.994486] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.007628] gpio-374 (wifi-enable): hogged as output/high [ 6.007988] gpio-431 (camera-control-output-low): hogged as output/low [ 6.008240] gpio-432 (camera-control-output-low): hogged as output/low [ 6.010345] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.012602] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.013396] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.014986] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.019915] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.025316] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.030996] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.039781] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.046502] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.058330] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.063629] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.069046] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.077822] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.087136] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.094844] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.101931] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.108495] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.118159] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.124089] pva 16000000.pva0: Adding to iommu group 22 [ 6.151904] pva 16000000.pva0: initialized [ 6.157266] pva 16800000.pva1: Adding to iommu group 23 [ 6.169566] pva 16800000.pva1: initialized [ 6.174096] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.187597] nvdla 15880000.nvdla0: initialized [ 6.189179] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.197515] nvdla 158c0000.nvdla1: initialized [ 6.201728] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.201759] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.201788] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.201913] tegradc 15200000.display: Adding to iommu group 26 [ 6.202047] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.203173] tegradccommon 15200000.display-hub: dma mapping done [ 6.203856] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.208661] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.209536] tegradc 15210000.display: Adding to iommu group 26 [ 6.210104] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.210263] generic_infoframe_type: 0x87 [ 6.210370] tegradc 15200000.display: DT parsed successfully [ 6.210470] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.213922] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.214398] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.214410] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.214413] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.215222] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.215234] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.216475] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.220111] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.226096] tegra_cec 3960000.tegra_cec: probed [ 6.227595] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.231655] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.245679] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.252840] tegradc 15210000.display: disp0 connected to head1->sor [ 6.258276] kfuse 3830000.kfuse: initialized [ 6.266047] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.274746] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.280082] tegradc 15210000.display: DT parsed successfully [ 6.286211] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.286842] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.296827] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.305016] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.389223] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.393723] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.402901] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.408767] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.429026] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.429387] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.431870] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.440136] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.448713] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.455566] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.463056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.470263] usb usb1: Product: xHCI Host Controller [ 6.474944] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.481498] usb usb1: SerialNumber: 3610000.xhci [ 6.486855] hub 1-0:1.0: USB hub found [ 6.490088] hub 1-0:1.0: 4 ports detected [ 6.494668] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.499202] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.507068] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.514717] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.522657] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.529650] usb usb2: Product: xHCI Host Controller [ 6.534871] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.541084] usb usb2: SerialNumber: 3610000.xhci [ 6.546417] hub 2-0:1.0: USB hub found [ 6.549341] hub 2-0:1.0: 4 ports detected [ 6.583619] random: crng init done [ 6.593387] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.599364] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.600960] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.601158] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.614998] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.616073] tegra194-cpufreq ccplex: probed with BWMGR [ 6.617389] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.617892] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.618403] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.619595] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.627043] mmc0: CQHCI version 5.10 [ 6.629072] tegra194-vi5 15c10000.vi: initialized [ 6.631776] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.633011] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.636858] generic_infoframe_type: 0x87 [ 6.643076] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.647007] tegradc 15200000.display: DT parsed successfully [ 6.654908] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.660672] tegradc 15200000.display: Display dc.00000000a80ad4d3 registered with id=0 [ 6.666902] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.666930] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.676479] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.681779] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.688910] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.696652] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.696662] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.700944] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.703031] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.703038] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.747619] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.747672] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.753372] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.753424] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.767687] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.773837] nvethernet 2490000.ethernet: Macsec not supported [ 6.775254] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.786008] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.791666] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.798376] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.806399] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.814650] tegradc 15200000.display: probed [ 6.819605] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.838924] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.845685] tegra-se-nvhost 15810000.se: initialized [ 6.853890] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.855284] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.861995] tegra-se-nvhost 15820000.se: initialized [ 6.868120] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.872946] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.873443] mmc0: Command Queue Engine enabled [ 6.879372] tegra-se-nvhost 15830000.se: initialized [ 6.883104] mmc0: periodic cache flush enabled [ 6.883123] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.889379] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.892819] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.899112] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.905181] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.923204] Console: switching to colour frame buffer device 240x67 [ 6.929169] tegradc 15200000.display: fb registered [ 6.934265] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.934300] tegra-se-nvhost 15840000.se: initialized [ 6.940691] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.945860] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.949971] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.950889] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.958362] tegra_actmon d230000.actmon: in actmon_register()... [ 6.972147] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.976751] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.984527] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.984532] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.984536] usb 1-2: Manufacturer: Generic [ 6.986427] hub 1-2:1.0: USB hub found [ 6.990697] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.998910] hub 1-2:1.0: 4 ports detected [ 7.003040] hvc_sysfs: hypervisor is not present [ 7.033080] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.054764] ALSA device list: [ 7.054870] No soundcards found. [ 7.055937] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.056125] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.059128] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.065545] Extcon AUX1(HDMI) enable [ 7.069005] tegradc 15210000.display: disp1 connected to head1->sor [ 7.075551] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.077782] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.082365] tegradc 15210000.display: DT parsed successfully [ 7.095621] tegradc 15210000.display: Display dc.000000002604e496 registered with id=1 [ 7.103486] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.109734] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.122933] tegradc 15210000.display: probed [ 7.123307] tegradc 15210000.display: fb registered [ 7.126143] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.133439] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.134441] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.140659] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.142554] Freeing unused kernel memory: 3968K [ 7.148237] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.148249] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.153022] usb 2-3: Manufacturer: Generic [ 7.165099] Run /init as init process [ 7.176105] hub 2-3:1.0: USB hub found [ 7.182418] tegradc 15210000.display: blank - powerdown [ 7.184321] hub 2-3:1.0: 4 ports detected [ 7.187561] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.199541] Extcon DP: HPD disabled [ 7.199546] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.199556] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.199561] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.222830] tegradc 15200000.display: blank - powerdown [ 7.232916] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.244945] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.266825] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.266830] Extcon AUX1(HDMI) disable [ 7.274321] Root device found: mmcblk0p1 [ 7.276328] Found dev node: /dev/mmcblk0p1 [ 7.290692] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.291547] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.297478] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.297484] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.304130] tegradc 15200000.display: unblank [ 7.305216] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.305405] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.311455] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.312765] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.313316] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.316664] Rootfs mounted over mmcblk0p1 [ 7.317456] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.317461] Extcon AUX1(HDMI) enable [ 7.330098] tegradc 15200000.display: sync windows ret = 247 [ 7.345849] Switching from initrd to actual rootfs [ 7.368452] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.375650] Extcon HDMI: HPD enabled [ 7.379567] tegradc 15200000.display: hdmi: plugged [ 7.394071] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.395573] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.399976] usb 1-3: Product: Bluetooth Radio [ 7.404456] usb 1-3: Manufacturer: Realtek [ 7.408882] usb 1-3: SerialNumber: 00e04c000001 [ 7.516812] systemd[1]: System time before build time, advancing clock. [ 7.587581] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.592536] systemd[1]: Detected architecture arm64. [ 7.631436] systemd[1]: Set hostname to . [ 7.795323] systemd-sysv-generator[240]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.139426] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.141192] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.146916] systemd[1]: Created slice system-modprobe.slice. [ 8.151667] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.155779] systemd[1]: Created slice User and Session Slice. [ 8.159270] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.163376] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.166943] systemd[1]: Reached target User and Group Name Lookups. [ 8.170183] systemd[1]: Reached target Slices. [ 8.173325] systemd[1]: Reached target Swap. [ 8.177380] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.181091] systemd[1]: Listening on Syslog Socket. [ 8.184653] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.188076] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.192409] systemd[1]: Listening on Journal Audit Socket. [ 8.196059] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.201176] systemd[1]: Listening on Journal Socket. [ 8.206198] systemd[1]: Listening on udev Control Socket. [ 8.209739] systemd[1]: Listening on udev Kernel Socket. [ 8.218054] systemd[1]: Mounting Huge Pages File System... [ 8.226167] systemd[1]: Mounting POSIX Message Queue File System... [ 8.234421] systemd[1]: Mounting RPC Pipe File System... [ 8.242874] systemd[1]: Mounting Kernel Debug File System... [ 8.251198] systemd[1]: Mounting Kernel Trace File System... [ 8.261132] systemd[1]: Starting Journal Service... [ 8.270040] systemd[1]: Starting Set the console keyboard layout... [ 8.278647] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.282218] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.288799] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.296830] systemd[1]: Started Nameserver information manager. [ 8.301930] systemd[1]: Reached target Network (Pre). [ 8.309285] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.311099] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.319460] systemd[1]: Starting Load Kernel Modules... [ 8.327440] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.336020] systemd[1]: Starting udev Coldplug all Devices... [ 8.346767] systemd[1]: Mounted Huge Pages File System. [ 8.350576] systemd[1]: Mounted POSIX Message Queue File System. [ 8.355063] systemd[1]: Mounted RPC Pipe File System. [ 8.357941] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.359702] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.362273] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.363836] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.364473] systemd[1]: Mounted Kernel Debug File System. [ 8.365498] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.368312] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.368509] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.368742] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.368954] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.368968] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.378439] systemd[1]: Mounted Kernel Trace File System. [ 8.387336] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.394782] systemd[1]: nvfb-udev.service: Succeeded. [ 8.398921] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.410799] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.423868] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.425741] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.433067] systemd[1]: Starting Load/Save Random Seed... [ 8.441129] systemd[1]: Starting Create System Users... [ 8.457371] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.457371] [ 8.489181] systemd[1]: Finished Load/Save Random Seed. [ 8.496105] systemd[1]: Finished Load Kernel Modules. [ 8.500962] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.507558] systemd[1]: Mounting Kernel Configuration File System... [ 8.516759] systemd[1]: Started OP-TEE Client Supplicant. [ 8.525061] systemd[1]: Starting Apply Kernel Variables... [ 8.532266] systemd[1]: Mounted Kernel Configuration File System. [ 8.538958] systemd[1]: Finished Set the console keyboard layout. [ 8.550580] systemd[1]: Finished Create System Users. [ 9.947778] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.954283] imx219 9-0010: board setup failed [ 9.955549] imx219: probe of 9-0010 failed with error -121 [ 9.967962] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.980976] imx219 10-0010: board setup failed [ 9.982251] imx219: probe of 10-0010 failed with error -121 [ 10.087937] hot-surface-alert cooling state: 0 -> 1 [ 10.463741] using random self ethernet address [ 10.465748] using random host ethernet address [ 11.549598] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.551295] Creating 1 MTD partitions on "spi6.0": [ 11.553613] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.057389] using random self ethernet address [ 12.059009] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.792032] nvidia: loading out-of-tree module taints kernel. [ 59.259180] watchdog: watchdog0: watchdog did not stop! [ 59.770542] Trying to unregister non-registered hwtime source [ 62.831668] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.833241] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERRýÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.620] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.649] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.650] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 4096, height = 2160, frequency = 296703296 [0003.723] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.734] I> hdmi_enable, starting HDMI initialisation [0003.739] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.750] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000659] Console: colour dummy device 80x25 [ 0.002098] printk: console [tty0] enabled [ 0.002159] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002195] pid_max: default: 32768 minimum: 301 [ 0.002356] LSM: Security Framework initializing [ 0.002414] Yama: becoming mindful. [ 0.002457] SELinux: Initializing. [ 0.002599] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002641] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005653] rcu: Hierarchical SRCU implementation. [ 0.005898] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006604] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006655] DTB Build time: Aug 10 2022 20:31:49 [ 0.009472] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009717] Remapping and enabling EFI services. [ 0.011677] smp: Bringing up secondary CPUs ... [ 0.040930] Detected PIPT I-cache on CPU1 [ 0.040990] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070500] Detected PIPT I-cache on CPU2 [ 0.070663] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100231] Detected PIPT I-cache on CPU3 [ 0.100380] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130000] Detected PIPT I-cache on CPU4 [ 0.130168] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.159947] Detected PIPT I-cache on CPU5 [ 0.160113] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160517] smp: Brought up 1 node, 6 CPUs [ 0.160755] SMP: Total of 6 processors activated. [ 0.160808] CPU features: detected: Privileged Access Never [ 0.160828] CPU features: detected: LSE atomic instructions [ 0.160840] CPU features: detected: User Access Override [ 0.160852] CPU features: detected: 32-bit EL0 Support [ 0.160863] CPU features: detected: RAS Extension Support [ 0.160874] CPU features: detected: CRC32 instructions [ 0.160917] CPU features: detected: 32-bit EL1 Support [ 0.228095] CPU: All CPU(s) started at EL2 [ 0.234050] devtmpfs: initialized [ 0.308871] Registered cp15_barrier emulation handler [ 0.309038] Registered setend emulation handler [ 0.309184] KASLR enabled [ 0.309524] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.309561] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.311756] pinctrl core: initialized pinctrl subsystem [ 0.313264] SMBIOS 3.0.0 present. [ 0.313314] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.314296] NET: Registered protocol family 16 [ 0.317555] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.318294] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.319395] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.319476] audit: initializing netlink subsys (disabled) [ 0.319859] audit: type=2000 audit(0.316:1): state=initialized audit_enabled=0 res=1 [ 0.320584] thermal_sys: Registered thermal governor 'step_wise' [ 0.320594] thermal_sys: Registered thermal governor 'power_allocator' [ 0.320616] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.324394] cpuidle: using governor menu [ 0.325166] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.325682] ASID allocator initialised with 32768 entries [ 0.326041] Serial: AMBA PL011 UART driver [ 0.331616] Tegra reboot handler registered. [ 0.417456] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.417595] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.417802] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.417857] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.418050] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.418130] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.418308] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.418368] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.418522] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.418575] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.421910] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.421956] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.421995] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.422056] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.422152] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.422223] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.422275] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.422335] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.422376] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.422409] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.422441] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.422473] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.422508] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.422544] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.422576] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.422608] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.422640] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.422756] mc-err: mcerr ops are set to t19x [ 0.437700] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.437740] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.437758] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.437775] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.445343] ACPI: Interpreter disabled. [ 0.446812] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.448641] iommu: Default domain type: Translated [ 0.448711] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.449283] SCSI subsystem initialized [ 0.449450] usbcore: registered new interface driver usbfs [ 0.449497] usbcore: registered new interface driver hub [ 0.449540] usbcore: registered new device driver usb [ 0.450187] mc: Linux media interface: v0.10 [ 0.450229] videodev: Linux video capture interface: v2.00 [ 0.450699] pps_core: LinuxPPS API ver. 1 registered [ 0.450717] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.450774] PTP clock support registered [ 0.451103] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.451445] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.451537] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.452344] Registered efivars operations [ 0.459039] FPGA manager framework [ 0.459162] Advanced Linux Sound Architecture Driver Initialized. [ 0.460003] Bluetooth: Core ver 2.22 [ 0.460055] NET: Registered protocol family 31 [ 0.460072] Bluetooth: HCI device and connection manager initialized [ 0.460093] Bluetooth: HCI socket layer initialized [ 0.460112] Bluetooth: L2CAP socket layer initialized [ 0.460140] Bluetooth: SCO socket layer initialized [ 0.462079] camchar: rtcpu character device driver loaded [ 0.462840] clocksource: Switched to clocksource arch_sys_counter [ 0.879075] VFS: Disk quotas dquot_6.6.0 [ 0.879173] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.879637] pnp: PnP ACPI: disabled [ 0.891986] la/ptsa driver initialized. [ 0.892164] NET: Registered protocol family 2 [ 0.892357] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.900060] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.900184] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.900545] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.901172] TCP: Hash tables configured (established 65536 bind 65536) [ 0.901314] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.901458] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.901732] NET: Registered protocol family 1 [ 0.902911] RPC: Registered named UNIX socket transport module. [ 0.902943] RPC: Registered udp transport module. [ 0.902958] RPC: Registered tcp transport module. [ 0.902973] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.902999] PCI: CLS 0 bytes, default 64 [ 0.903282] Trying to unpack rootfs image as initramfs... [ 1.170395] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.173521] Freeing initrd memory: 8196K [ 1.177258] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.177295] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.177334] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.177587] kvm [1]: IPA Size Limit: 40 bits [ 1.178016] kvm [1]: vgic interrupt IRQ9 [ 1.178537] kvm [1]: VHE mode initialized successfully [ 1.179819] Initialise system trusted keyrings [ 1.180115] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.185049] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.185868] NFS: Registering the id_resolver key type [ 1.185904] Key type id_resolver registered [ 1.185919] Key type id_legacy registered [ 1.186001] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.186026] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.186064] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.195891] NET: Registered protocol family 38 [ 1.195914] Key type asymmetric registered [ 1.195929] Asymmetric key parser 'x509' registered [ 1.195999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.196295] io scheduler mq-deadline registered [ 1.196325] io scheduler kyber registered [ 1.201549] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.204273] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.204348] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.204441] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.204511] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.204632] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.209731] scrncapt: init (heads:4 wins:6 planes:4) [ 1.209745] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.210931] EINJ: ACPI disabled. [ 1.214076] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.214103] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.214117] tegra-pmc: ### PMC reset level: L1 [ 1.214133] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.214178] tegra-pmc: PMC Prod config success [ 1.219364] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.224776] random: fast init done [ 1.224958] printk: console [ttyTCU0] enabled [ 2.776502] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.781364] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.785939] arm-smmu 10000000.iommu: stage 1 translation [ 2.791270] arm-smmu 10000000.iommu: stage 2 translation [ 2.796678] arm-smmu 10000000.iommu: nested translation [ 2.802262] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.809179] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.819368] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.822279] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.828865] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.836883] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.842156] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.846880] arm-smmu 12000000.iommu: stage 1 translation [ 2.852133] arm-smmu 12000000.iommu: stage 2 translation [ 2.857558] arm-smmu 12000000.iommu: nested translation [ 2.862986] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.870164] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.879860] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.883287] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.889844] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.897513] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.907313] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.910516] tegra_profiler: auth: init [ 2.914786] THERMAL EST: found 3 subdevs [ 2.918201] THERMAL EST num_resources: 0 [ 2.921816] [THERMAL EST subdev 0] [ 2.925367] [THERMAL EST subdev 1] [ 2.928779] [THERMAL EST subdev 2] [ 2.931768] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.938261] THERMAL EST: thz register success. [ 2.942719] THERMAL EST: end of probe, return err: 0 [ 2.948020] nvsciipc: loaded module [ 2.955254] tun: Universal TUN/TAP device driver, 1.6 [ 2.957690] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.963816] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.969347] e1000e: Intel(R) PRO/1000 Network Driver [ 2.974312] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.980382] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.985422] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.991647] PPP generic driver version 2.4.2 [ 2.995874] PPP BSD Compression module registered [ 3.000381] PPP Deflate Compression module registered [ 3.005880] PPP MPPE Compression module registered [ 3.010896] usbcore: registered new interface driver r8152 [ 3.016145] usbcore: registered new interface driver asix [ 3.021471] usbcore: registered new interface driver ax88179_178a [ 3.027855] usbcore: registered new interface driver cdc_ether [ 3.033805] usbcore: registered new interface driver net1080 [ 3.039430] usbcore: registered new interface driver cdc_subset [ 3.045189] usbcore: registered new interface driver zaurus [ 3.051150] usbcore: registered new interface driver cdc_ncm [ 3.056830] usbcore: registered new interface driver aqc111 [ 3.062235] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.068538] ohci-pci: OHCI PCI platform driver [ 3.072578] ohci-platform: OHCI generic platform driver [ 3.078354] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.084700] usbcore: registered new interface driver uas [ 3.089143] usbcore: registered new interface driver usb-storage [ 3.095053] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.101312] mousedev: PS/2 mouse device common for all mice [ 3.106291] usbcore: registered new interface driver xpad [ 3.113943] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.116792] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.124555] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.131394] i2c /dev entries driver [ 3.134659] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.140245] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.145508] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.150958] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.156277] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.162089] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.167483] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.180794] device-mapper: uevent: version 1.0.3 [ 3.181209] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.187955] cpuidle: Initializing cpuidle driver [ 3.191733] sdhci: Secure Digital Host Controller Interface driver [ 3.196375] sdhci: Copyright(c) Pierre Ossman [ 3.200733] Synopsys Designware Multimedia Card Interface Driver [ 3.206679] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.212916] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.213739] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.225952] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.247463] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.257360] vdd-1v0: supplied by regulator-dummy [ 3.262870] vdd-1v8-hs: supplied by regulator-dummy [ 3.267720] vdd-1v8-ls: supplied by regulator-dummy [ 3.272651] vdd-1v8-ao: supplied by regulator-dummy [ 3.276610] vddio-ddr-1v1: supplied by regulator-dummy [ 3.281201] vdd-rtc: supplied by regulator-dummy [ 3.283026] spmic-ldo1: supplied by regulator-dummy [ 3.284344] vdd-ao-3v3: supplied by regulator-dummy [ 3.290589] vddio-emmc-3v3: supplied by regulator-dummy [ 3.296843] spmic-ldo4: supplied by regulator-dummy [ 3.298120] vdd-usb-3v3: supplied by regulator-dummy [ 3.304384] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.310626] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.316245] spmic-ldo8: supplied by vdd-1v8-ls [ 3.317810] gpio-510 (gpio_default): hogged as output/high [ 3.319184] gpio-511 (gpio_default): hogged as output/high [ 3.322146] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.459255] max77686-rtc max77620-rtc: registered as rtc0 [ 3.460661] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.461041] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.290344] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.291630] hid: raw HID events driver (C) Jiri Kosina [ 4.292622] usbcore: registered new interface driver usbhid [ 4.292781] usbhid: USB HID core driver [ 4.295113] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.296469] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.411084] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.484933] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 74.656 ms) ÿá[ 4.380332] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.380948] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.381928] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.382680] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.384397] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.384998] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.385539] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.387119] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.387392] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.390614] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.396938] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.403409] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.408371] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.414186] denver_knobs_init:MTS_VERSION:55637613 [ 4.427464] t19x_cache tegra-cache: probed [ 4.430501] optee: probing for conduit method. [ 4.431403] optee: revision 3.16 (65cc2218) [ 4.432310] optee: dynamic shared memory is enabled [ 4.435492] optee: initialized driver [ 4.441157] nvpmodel: initialized successfully [ 4.442680] tegra_hv: get_hvd: not initialized yet [ 4.447487] user_ivc_mempool: hypervisor not present [ 4.453532] usbcore: registered new interface driver snd-usb-audio [ 4.460176] u32 classifier [ 4.461438] input device check on [ 4.465299] Actions configured [ 4.468602] Initializing XFRM netlink socket [ 4.473644] NET: Registered protocol family 10 [ 4.479693] Segment Routing with IPv6 [ 4.480808] NET: Registered protocol family 17 [ 4.485309] NET: Registered protocol family 15 [ 4.489466] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.503191] Bluetooth: RFCOMM socket layer initialized [ 4.508388] Bluetooth: RFCOMM ver 1.11 [ 4.511936] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.517549] Bluetooth: HIDP socket layer initialized [ 4.523771] 9pnet: Installing 9P2000 support [ 4.526947] Key type dns_resolver registered [ 4.532708] registered taskstats version 1 [ 4.535426] Loading compiled-in X.509 certificates [ 4.547433] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.551435] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.561771] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.563624] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.571855] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.580477] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.694933] tegra194-pcie 14160000.pcie: Link up [ 4.697638] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.697854] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.698002] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.698238] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.698436] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.698971] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.699395] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.708614] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.709059] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.709542] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.711157] pci 0004:01:00.0: supports D1 D2 [ 4.711303] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.719257] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.719539] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.719772] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.720200] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.720482] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.723741] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.729792] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.736904] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.745701] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.755266] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.760601] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.766208] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.772722] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.781875] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.783461] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.792118] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.800329] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.915815] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.916393] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.916563] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.916745] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.917006] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.917284] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.917682] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.918127] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.938601] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.938940] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.940679] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.941790] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.943371] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.944646] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.945741] pci 0005:00:00.0: Removing from iommu group 7 [ 5.946073] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.980233] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.004702] host1x 13e10000.host1x: initialized [ 6.006116] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.007273] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.008476] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.009205] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.010375] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.011041] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.012243] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.012851] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.014014] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.015952] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.026060] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.032666] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.043100] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.049930] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.059837] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.067041] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.076795] falcon 15340000.vic: Adding to iommu group 17 [ 6.091015] falcon 15340000.vic: initialized [ 6.092074] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.097577] falcon 15380000.nvjpg: initialized [ 6.098138] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.109619] falcon 154c0000.nvenc: initialized [ 6.110187] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.119462] falcon 15a80000.nvenc1: initialized [ 6.120038] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.133011] nvdec 15480000.nvdec: initialized [ 6.133689] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.144288] nvdec 15140000.nvdec1: initialized [ 6.144923] tsec 15500000.tsec: Adding to iommu group 18 [ 6.151048] tsec 15500000.tsec: initialized [ 6.151625] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.157166] tsec 15100000.tsecb: initialized [ 6.161191] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.198522] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.213455] gpio-374 (wifi-enable): hogged as output/high [ 6.213884] gpio-431 (camera-control-output-low): hogged as output/low [ 6.214160] gpio-432 (camera-control-output-low): hogged as output/low [ 6.216134] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.218172] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.218772] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.220323] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.221467] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.222803] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.224665] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.234197] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.240662] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.252561] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.257076] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.263057] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.271683] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.281353] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.288401] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.295731] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.302225] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.311698] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.318117] pva 16000000.pva0: Adding to iommu group 22 [ 6.346534] pva 16000000.pva0: initialized [ 6.350781] pva 16800000.pva1: Adding to iommu group 23 [ 6.370368] pva 16800000.pva1: initialized [ 6.374720] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.395822] nvdla 15880000.nvdla0: initialized [ 6.397214] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.406493] nvdla 158c0000.nvdla1: initialized [ 6.409520] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.409684] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.409811] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.410330] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.410754] tegradccommon 15200000.display-hub: dma mapping done [ 6.411162] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.412319] tegradc 15210000.display: Adding to iommu group 26 [ 6.412404] tegradc 15200000.display: Adding to iommu group 26 [ 6.412502] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.412514] tegra_cec 3960000.tegra_cec: probed [ 6.414464] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.421593] tegradc 15210000.display: disp0 connected to head1->sor [ 6.423793] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.430308] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.437936] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.443296] tegradc 15210000.display: DT parsed successfully [ 6.450563] kfuse 3830000.kfuse: initialized [ 6.455336] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.456611] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.461044] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.467862] generic_infoframe_type: 0x87 [ 6.473943] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.480453] tegradc 15200000.display: DT parsed successfully [ 6.485362] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.490757] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.494669] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.497989] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.502385] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.502397] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.503310] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.512585] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.519187] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.520398] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.528685] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.539131] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.545297] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.550778] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.556982] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.622986] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.623458] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.625716] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.634167] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.642642] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.649515] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.656671] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.659877] random: crng init done [ 6.664244] usb usb1: Product: xHCI Host Controller [ 6.672463] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.678402] usb usb1: SerialNumber: 3610000.xhci [ 6.684402] hub 1-0:1.0: USB hub found [ 6.687026] hub 1-0:1.0: 4 ports detected [ 6.692123] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.696756] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.704082] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.711925] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.719655] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.727150] usb usb2: Product: xHCI Host Controller [ 6.731790] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.738087] usb usb2: SerialNumber: 3610000.xhci [ 6.743391] hub 2-0:1.0: USB hub found [ 6.746523] hub 2-0:1.0: 4 ports detected [ 6.790482] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.796331] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.797900] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.798081] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.811006] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.812023] tegra194-cpufreq ccplex: probed with BWMGR [ 6.813417] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.813924] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.814423] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.815552] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.821115] tegra194-vi5 15c10000.vi: initialized [ 6.822341] tegradc 15210000.display: disp0 connected to head1->sor [ 6.823974] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.825034] mmc0: CQHCI version 5.10 [ 6.827012] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.832934] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.836663] tegradc 15210000.display: DT parsed successfully [ 6.843719] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.851909] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.852013] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.857662] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.863998] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.866883] generic_infoframe_type: 0x87 [ 6.866914] tegradc 15200000.display: DT parsed successfully [ 6.866945] tegradc 15200000.display: Display dc.00000000fe98bf15 registered with id=0 [ 6.867585] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.867591] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.867596] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.867960] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.867965] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.868115] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.869167] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.869171] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.871299] tegradc 15200000.display: probed [ 6.871886] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.871893] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.878989] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.950878] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.958065] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.958077] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.982579] mmc0: Command Queue Engine enabled [ 6.985361] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.990684] mmc0: periodic cache flush enabled [ 6.990699] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.004424] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.010730] nvethernet 2490000.ethernet: Macsec not supported [ 7.017573] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.023522] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 7.041300] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.046251] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 7.080104] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.080245] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.080334] Console: switching to colour frame buffer device 240x67 [ 7.081244] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.087135] tegradc 15200000.display: fb registered [ 7.095622] tegra-se-nvhost 15810000.se: initialized [ 7.099849] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.111333] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.116678] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.122026] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.128027] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.134694] tegra-se-nvhost 15820000.se: initialized [ 7.137311] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.137318] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.137322] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.137326] usb 1-2: Manufacturer: Generic [ 7.142350] hub 1-2:1.0: USB hub found [ 7.147913] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.152653] hub 1-2:1.0: 4 ports detected [ 7.159834] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.196553] tegra-se-nvhost 15830000.se: initialized [ 7.202231] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.205499] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.207409] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.216980] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.222956] tegra-se-nvhost 15840000.se: initialized [ 7.230096] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.230757] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.236610] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.242607] Extcon AUX1(HDMI) enable [ 7.242763] tegradc 15210000.display: disp1 connected to head1->sor [ 7.251236] tegra_actmon d230000.actmon: in actmon_register()... [ 7.255940] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.259566] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.265343] tegradc 15210000.display: DT parsed successfully [ 7.271742] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.278809] tegradc 15210000.display: Display dc.00000000f230840c registered with id=1 [ 7.279750] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.284769] hvc_sysfs: hypervisor is not present [ 7.289616] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.316395] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.317855] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.324254] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.325167] ALSA device list: [ 7.325172] No soundcards found. [ 7.339281] tegradc 15210000.display: probed [ 7.346201] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.346207] usb 2-3: Manufacturer: Generic [ 7.357310] hub 2-3:1.0: USB hub found [ 7.370008] tegradc 15210000.display: fb registered [ 7.371946] hub 2-3:1.0: 4 ports detected [ 7.373404] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.373409] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.373415] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.375948] Freeing unused kernel memory: 3968K [ 7.403969] tegradc 15210000.display: blank - powerdown ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.408877] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.408880] Extcon DP: HPD disabled [ 7.408887] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.408903] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.408909] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.408995] Run /init as init process [ 7.409022] tegradc 15200000.display: blank - powerdown [ 7.434846] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.455930] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.455934] Extcon AUX1(HDMI) disable [ 7.458874] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.458879] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.479445] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.480399] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.492207] tegradc 15200000.display: unblank [ 7.493453] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.493648] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.499809] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.501683] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.505667] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.505671] Extcon AUX1(HDMI) enable [ 7.518480] tegradc 15200000.display: sync windows ret = 247 [ 7.560884] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.567779] Extcon HDMI: HPD enabled [ 7.571444] tegradc 15200000.display: hdmi: plugged [ 7.584073] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.585613] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.592218] usb 1-3: Product: Bluetooth Radio [ 7.596452] usb 1-3: Manufacturer: Realtek [ 7.600856] usb 1-3: SerialNumber: 00e04c000001 [ 7.612125] Root device found: mmcblk0p1 [ 7.615541] Found dev node: /dev/mmcblk0p1 [ 7.651958] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.657725] Rootfs mounted over mmcblk0p1 [ 7.702950] Switching from initrd to actual rootfs [ 7.846711] systemd[1]: System time before build time, advancing clock. [ 7.919681] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.924696] systemd[1]: Detected architecture arm64. [ 7.969324] systemd[1]: Set hostname to . [ 8.131032] systemd-sysv-generator[251]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.476962] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.478747] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.484538] systemd[1]: Created slice system-modprobe.slice. [ 8.489301] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.493612] systemd[1]: Created slice User and Session Slice. [ 8.497307] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.501511] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.504964] systemd[1]: Reached target User and Group Name Lookups. [ 8.508248] systemd[1]: Reached target Slices. [ 8.511421] systemd[1]: Reached target Swap. [ 8.515496] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.519236] systemd[1]: Listening on Syslog Socket. [ 8.522770] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.526125] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.530439] systemd[1]: Listening on Journal Audit Socket. [ 8.534090] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.537832] systemd[1]: Listening on Journal Socket. [ 8.542021] systemd[1]: Listening on udev Control Socket. [ 8.546017] systemd[1]: Listening on udev Kernel Socket. [ 8.555651] systemd[1]: Mounting Huge Pages File System... [ 8.563849] systemd[1]: Mounting POSIX Message Queue File System... [ 8.571916] systemd[1]: Mounting RPC Pipe File System... [ 8.580454] systemd[1]: Mounting Kernel Debug File System... [ 8.589201] systemd[1]: Mounting Kernel Trace File System... [ 8.599213] systemd[1]: Starting Journal Service... [ 8.608042] systemd[1]: Starting Set the console keyboard layout... [ 8.616056] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.619614] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.625854] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.633771] systemd[1]: Started Nameserver information manager. [ 8.638515] systemd[1]: Reached target Network (Pre). [ 8.645577] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.647672] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.653919] systemd[1]: Starting Load Kernel Modules... [ 8.661582] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.670942] systemd[1]: Starting udev Coldplug all Devices... [ 8.680885] systemd[1]: Mounted Huge Pages File System. [ 8.684761] systemd[1]: Mounted POSIX Message Queue File System. [ 8.688477] systemd[1]: Mounted RPC Pipe File System. [ 8.692154] systemd[1]: Mounted Kernel Debug File System. [ 8.695967] systemd[1]: Mounted Kernel Trace File System. [ 8.696333] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.700183] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.700189] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.700199] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.700203] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.703180] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.703579] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.704994] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.706902] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.707922] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.725681] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.731305] systemd[1]: nvfb-udev.service: Succeeded. [ 8.735956] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.748169] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.753129] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.755812] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.769691] systemd[1]: Starting Load/Save Random Seed... [ 8.780044] systemd[1]: Starting Create System Users... [ 8.813754] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.813754] [ 8.838608] systemd[1]: Finished Load/Save Random Seed. [ 8.845608] systemd[1]: Finished Create System Users. [ 8.852494] systemd[1]: Finished Load Kernel Modules. [ 8.856995] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.864417] systemd[1]: Mounting Kernel Configuration File System... [ 8.872845] systemd[1]: Started OP-TEE Client Supplicant. [ 8.881509] systemd[1]: Starting Apply Kernel Variables... [ 8.888935] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.899396] systemd[1]: Finished Set the console keyboard layout. [ 8.906047] systemd[1]: Mounted Kernel Configuration File System. [ 10.225088] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.231768] imx219 9-0010: board setup failed [ 10.233067] imx219: probe of 9-0010 failed with error -121 [ 10.254065] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.262930] imx219 10-0010: board setup failed [ 10.263030] imx219: probe of 10-0010 failed with error -121 [ 10.429054] hot-surface-alert cooling state: 0 -> 1 [ 10.570668] using random self ethernet address [ 10.571883] using random host ethernet address [ 12.167716] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.167722] Creating 1 MTD partitions on "spi6.0": [ 12.167784] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.576567] using random self ethernet address [ 12.578112] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.801883] nvidia: loading out-of-tree module taints kernel. [ 59.220594] watchdog: watchdog0: watchdog did not stop! [ 59.683830] Trying to unregister non-registered hwtime source [ 62.740818] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.742452] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.210] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.211] I> CPU-BL Params @ 0xca020000 [0003.211] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.212] I> 2) Base:0xc9800000 Size:0x00200000 [0003.212] I> 3) Base:0xc8600000 Size:0x00200000 [0003.215] I> 4) Base:0xc8200000 Size:0x00100000 [0003.219] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.228] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.237] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.246] I> 11) Base:0x40000000 Size:0x00040000 [0003.250] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.255] I> 13) Base:0x40046000 Size:0x00002000 [0003.259] I> 14) Base:0x40048000 Size:0x00002000 [0003.264] I> 15) Base:0xaf000000 Size:0x00004000 [0003.268] I> 16) Base:0x4004a000 Size:0x00002000 [0003.273] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.277] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.286] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.295] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.304] I> 24) Base:0xcc000000 Size:0x02000000 [0003.308] I> 25) Base:0x40050000 Size:0x00002000 [0003.313] I> 26) Base:0x40040000 Size:0x00006000 [0003.317] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.322] I> 28) Base:0xc8400000 Size:0x00200000 [0003.326] I> 29) Base:0xc8800000 Size:0x00400000 [0003.331] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.335] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.344] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.353] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.362] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.371] I> 39) Base:0xb0000000 Size:0x08000000 [0003.375] I> 40) Base:0x00000000 Size:0x00000000 [0003.380] I> 41) Base:0x00000000 Size:0x00000000 [0003.384] I> 42) Base:0x00000000 Size:0x00000000 [0003.389] I> 43) Base:0x00000000 Size:0x00000000 [0003.393] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.402] GIC-SPI Target CPU: 0 [0003.405] Interrupts Init done [0003.408] calling constructors [0003.411] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.418] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.428] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.435] initializing platform [0003.438] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.447] I> Bl_dtb @0xadf00000 [0003.450] I> gpio framework initialized [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.470] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.476] I> fixed regulator driver initialized [0003.495] I> register 'maxim' power off handle [0003.497] I> virtual i2c enabled [0003.497] I> registered 'maxim,max20024' pmic [0003.498] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.498] I> Boot-device: QSPI [0003.498] I> Boot_device: QSPI_FLASH instance: 0 [0003.499] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.517] I> QSPI source rate = 204000 Khz [0003.520] I> Requested rate for QSPI clock = 34000 Khz [0003.525] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.530] I> tx_clk_tap_delay : 0 [0003.533] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.544] I> Qspi initialized successfully [0003.544] I> qspi flash-0 params source = boot args [0003.549] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.557] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.575] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.648] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.650] I> width = 720, height = 480, frequency = 26973026 [0003.654] I> width = 720, height = 576, frequency = 26973026 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.748] calling apps_init() [0003.749] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000640] Console: colour dummy device 80x25 [ 0.002208] printk: console [tty0] enabled [ 0.002283] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002336] pid_max: default: 32768 minimum: 301 [ 0.002504] LSM: Security Framework initializing [ 0.002596] Yama: becoming mindful. [ 0.002658] SELinux: Initializing. [ 0.002814] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002870] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005811] rcu: Hierarchical SRCU implementation. [ 0.006111] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006987] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007021] DTB Build time: Aug 10 2022 20:31:49 [ 0.009912] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010172] Remapping and enabling EFI services. [ 0.012182] smp: Bringing up secondary CPUs ... [ 0.041775] Detected PIPT I-cache on CPU1 [ 0.041882] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075466] Detected PIPT I-cache on CPU2 [ 0.075621] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105239] Detected PIPT I-cache on CPU3 [ 0.105329] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135025] Detected PIPT I-cache on CPU4 [ 0.135143] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164684] Detected PIPT I-cache on CPU5 [ 0.164770] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165133] smp: Brought up 1 node, 6 CPUs [ 0.165324] SMP: Total of 6 processors activated. [ 0.165354] CPU features: detected: Privileged Access Never [ 0.165367] CPU features: detected: LSE atomic instructions [ 0.165378] CPU features: detected: User Access Override [ 0.165391] CPU features: detected: 32-bit EL0 Support [ 0.165402] CPU features: detected: RAS Extension Support [ 0.165414] CPU features: detected: CRC32 instructions [ 0.165427] CPU features: detected: 32-bit EL1 Support [ 0.236443] CPU: All CPU(s) started at EL2 [ 0.241847] devtmpfs: initialized [ 0.291364] Registered cp15_barrier emulation handler [ 0.291465] Registered setend emulation handler [ 0.291488] KASLR enabled [ 0.291763] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291789] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293123] pinctrl core: initialized pinctrl subsystem [ 0.295192] SMBIOS 3.0.0 present. [ 0.295222] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.295835] NET: Registered protocol family 16 [ 0.297873] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.298368] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.299060] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.299150] audit: initializing netlink subsys (disabled) [ 0.299428] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.299889] thermal_sys: Registered thermal governor 'step_wise' [ 0.299895] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299910] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.301999] cpuidle: using governor menu [ 0.302333] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.302700] ASID allocator initialised with 32768 entries [ 0.302939] Serial: AMBA PL011 UART driver [ 0.306286] Tegra reboot handler registered. [ 0.376706] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.376816] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.377021] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.377065] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.377206] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.377242] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.377401] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.377437] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.377560] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.377598] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379659] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379728] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.379758] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379784] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379812] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379837] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379873] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379902] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379926] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379949] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379971] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379994] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.380015] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.380037] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.380063] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.380108] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.380131] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.380282] mc-err: mcerr ops are set to t19x [ 0.392460] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392482] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.392494] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392505] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399701] ACPI: Interpreter disabled. [ 0.400820] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.401974] iommu: Default domain type: Translated [ 0.402029] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.402370] SCSI subsystem initialized [ 0.402529] usbcore: registered new interface driver usbfs [ 0.402571] usbcore: registered new interface driver hub [ 0.402604] usbcore: registered new device driver usb [ 0.403035] mc: Linux media interface: v0.10 [ 0.403064] videodev: Linux video capture interface: v2.00 [ 0.403351] pps_core: LinuxPPS API ver. 1 registered [ 0.403363] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403383] PTP clock support registered [ 0.403575] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.403917] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.403970] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.404564] Registered efivars operations [ 0.409821] FPGA manager framework [ 0.409952] Advanced Linux Sound Architecture Driver Initialized. [ 0.410561] Bluetooth: Core ver 2.22 [ 0.410598] NET: Registered protocol family 31 [ 0.410609] Bluetooth: HCI device and connection manager initialized [ 0.410625] Bluetooth: HCI socket layer initialized [ 0.410641] Bluetooth: L2CAP socket layer initialized [ 0.410661] Bluetooth: SCO socket layer initialized [ 0.412572] camchar: rtcpu character device driver loaded [ 0.413346] clocksource: Switched to clocksource arch_sys_counter [ 0.702328] VFS: Disk quotas dquot_6.6.0 [ 0.702415] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.702738] pnp: PnP ACPI: disabled [ 0.715932] la/ptsa driver initialized. [ 0.716070] NET: Registered protocol family 2 [ 0.716238] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.720822] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.720939] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.721188] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.721674] TCP: Hash tables configured (established 65536 bind 65536) [ 0.721798] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.721898] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722097] NET: Registered protocol family 1 [ 0.723048] RPC: Registered named UNIX socket transport module. [ 0.723077] RPC: Registered udp transport module. [ 0.723095] RPC: Registered tcp transport module. [ 0.723112] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.723155] PCI: CLS 0 bytes, default 64 [ 0.723489] Trying to unpack rootfs image as initramfs... [ 0.998808] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.001891] Freeing initrd memory: 8196K [ 1.007166] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.007202] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.007233] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.007655] kvm [1]: IPA Size Limit: 40 bits [ 1.008171] kvm [1]: vgic interrupt IRQ9 [ 1.008744] kvm [1]: VHE mode initialized successfully [ 1.010666] Initialise system trusted keyrings [ 1.011021] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.017278] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.018162] NFS: Registering the id_resolver key type [ 1.018204] Key type id_resolver registered [ 1.018218] Key type id_legacy registered [ 1.018296] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.018331] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.018375] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.028241] NET: Registered protocol family 38 [ 1.028262] Key type asymmetric registered [ 1.028276] Asymmetric key parser 'x509' registered [ 1.028323] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.028552] io scheduler mq-deadline registered [ 1.028596] io scheduler kyber registered [ 1.034386] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.037182] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.037259] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.037329] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.037438] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.037507] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.042723] scrncapt: init (heads:4 wins:6 planes:4) [ 1.042922] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.043842] EINJ: ACPI disabled. [ 1.047145] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.047175] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.047194] tegra-pmc: ### PMC reset level: L1 [ 1.047210] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.047260] tegra-pmc: PMC Prod config success [ 1.052940] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.058515] random: fast init done [ 1.058742] printk: console [ttyTCU0] enabled [ 2.610302] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.614896] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.619745] arm-smmu 10000000.iommu: stage 1 translation [ 2.625038] arm-smmu 10000000.iommu: stage 2 translation [ 2.630714] arm-smmu 10000000.iommu: nested translation [ 2.636055] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.643224] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.654979] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.656319] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.662651] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.670439] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.675942] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.680666] arm-smmu 12000000.iommu: stage 1 translation [ 2.685932] arm-smmu 12000000.iommu: stage 2 translation [ 2.691600] arm-smmu 12000000.iommu: nested translation [ 2.697030] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.704210] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.715861] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.717047] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.723891] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.731039] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.740790] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.744106] tegra_profiler: auth: init [ 2.748327] THERMAL EST: found 3 subdevs [ 2.751986] THERMAL EST num_resources: 0 [ 2.755570] [THERMAL EST subdev 0] [ 2.759151] [THERMAL EST subdev 1] [ 2.762307] [THERMAL EST subdev 2] [ 2.765806] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.772000] THERMAL EST: thz register success. [ 2.776256] THERMAL EST: end of probe, return err: 0 [ 2.781859] nvsciipc: loaded module [ 2.788806] tun: Universal TUN/TAP device driver, 1.6 [ 2.791075] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.797319] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.803132] e1000e: Intel(R) PRO/1000 Network Driver [ 2.807815] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.814187] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.819440] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.825601] PPP generic driver version 2.4.2 [ 2.829869] PPP BSD Compression module registered [ 2.834161] PPP Deflate Compression module registered [ 2.839405] PPP MPPE Compression module registered [ 2.844678] usbcore: registered new interface driver r8152 [ 2.849925] usbcore: registered new interface driver asix [ 2.855524] usbcore: registered new interface driver ax88179_178a [ 2.861640] usbcore: registered new interface driver cdc_ether [ 2.867596] usbcore: registered new interface driver net1080 [ 2.873191] usbcore: registered new interface driver cdc_subset [ 2.878986] usbcore: registered new interface driver zaurus [ 2.884673] usbcore: registered new interface driver cdc_ncm [ 2.890345] usbcore: registered new interface driver aqc111 [ 2.896003] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.902320] ohci-pci: OHCI PCI platform driver [ 2.906396] ohci-platform: OHCI generic platform driver [ 2.912237] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.918749] usbcore: registered new interface driver uas [ 2.922661] usbcore: registered new interface driver usb-storage [ 2.929085] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.934813] mousedev: PS/2 mouse device common for all mice [ 2.939820] usbcore: registered new interface driver xpad [ 2.948022] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.950846] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.958606] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.965113] i2c /dev entries driver [ 2.968494] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.974070] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.979624] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.985012] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.990630] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.995631] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.001007] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.014498] device-mapper: uevent: version 1.0.3 [ 3.014914] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.021811] cpuidle: Initializing cpuidle driver [ 3.025424] sdhci: Secure Digital Host Controller Interface driver [ 3.030147] sdhci: Copyright(c) Pierre Ossman [ 3.034510] Synopsys Designware Multimedia Card Interface Driver [ 3.040717] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.046653] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.052419] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.059676] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.080997] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.090885] vdd-1v0: supplied by regulator-dummy [ 3.096546] vdd-1v8-hs: supplied by regulator-dummy [ 3.101602] vdd-1v8-ls: supplied by regulator-dummy [ 3.106506] vdd-1v8-ao: supplied by regulator-dummy [ 3.110598] vddio-ddr-1v1: supplied by regulator-dummy [ 3.115103] vdd-rtc: supplied by regulator-dummy [ 3.116966] spmic-ldo1: supplied by regulator-dummy [ 3.118281] vdd-ao-3v3: supplied by regulator-dummy [ 3.124579] vddio-emmc-3v3: supplied by regulator-dummy [ 3.130928] spmic-ldo4: supplied by regulator-dummy [ 3.132306] vdd-usb-3v3: supplied by regulator-dummy [ 3.138597] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.144946] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.150697] spmic-ldo8: supplied by vdd-1v8-ls [ 3.152143] gpio-510 (gpio_default): hogged as output/high [ 3.153533] gpio-511 (gpio_default): hogged as output/high [ 3.156473] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.292492] max77686-rtc max77620-rtc: registered as rtc0 [ 3.293525] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.293848] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.127718] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.129001] hid: raw HID events driver (C) Jiri Kosina [ 4.129742] usbcore: registered new interface driver usbhid [ 4.129885] usbhid: USB HID core driver [ 4.131757] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.132943] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.137897] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.212711] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.623 ms) ÿá[ 4.217632] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.218262] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.219475] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.220499] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.222464] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.223283] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.223893] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.225186] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.225674] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.227626] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.234174] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.240357] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.245759] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.252755] denver_knobs_init:MTS_VERSION:55637613 [ 4.264066] t19x_cache tegra-cache: probed [ 4.267140] optee: probing for conduit method. [ 4.268034] optee: revision 3.16 (65cc2218) [ 4.269298] optee: dynamic shared memory is enabled [ 4.272620] optee: initialized driver [ 4.280475] nvpmodel: initialized successfully [ 4.281255] tegra_hv: get_hvd: not initialized yet [ 4.285111] user_ivc_mempool: hypervisor not present [ 4.290926] usbcore: registered new interface driver snd-usb-audio [ 4.297486] u32 classifier [ 4.298774] input device check on [ 4.302483] Actions configured [ 4.305986] Initializing XFRM netlink socket [ 4.310707] NET: Registered protocol family 10 [ 4.317310] Segment Routing with IPv6 [ 4.318408] NET: Registered protocol family 17 [ 4.322381] NET: Registered protocol family 15 [ 4.327080] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.340486] Bluetooth: RFCOMM socket layer initialized [ 4.345406] Bluetooth: RFCOMM ver 1.11 [ 4.348945] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.355086] Bluetooth: HIDP socket layer initialized [ 4.360580] 9pnet: Installing 9P2000 support [ 4.364252] Key type dns_resolver registered [ 4.369900] registered taskstats version 1 [ 4.372923] Loading compiled-in X.509 certificates [ 4.386388] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.388582] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.399157] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.400868] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.409250] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.417843] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.533508] tegra194-pcie 14160000.pcie: Link up [ 4.536658] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.536875] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.537074] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.537431] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.537659] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.538065] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.538534] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.553876] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.554337] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.554947] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.556566] pci 0004:01:00.0: supports D1 D2 [ 4.556830] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.569274] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.569830] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.570153] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.570515] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.570857] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.571073] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.571349] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.575781] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.583971] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.594445] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.598862] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.604508] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.611505] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.620595] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.621932] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.630623] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.638861] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.747187] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.747694] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.747904] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.748041] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.748421] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.748598] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.749026] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.749601] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.774743] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.775064] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.776716] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.778304] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.779731] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.781292] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.782454] pci 0005:00:00.0: Removing from iommu group 7 [ 5.782739] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.819784] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.843915] host1x 13e10000.host1x: initialized [ 5.845667] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.846711] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.848171] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.849001] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.850448] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.851102] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.852326] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.853028] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.854117] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.854784] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.857201] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.864362] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.874358] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.881005] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.891311] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.898017] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.908030] falcon 15340000.vic: Adding to iommu group 17 [ 5.922797] falcon 15340000.vic: initialized [ 5.923749] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.929619] falcon 15380000.nvjpg: initialized [ 5.930222] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.941468] falcon 154c0000.nvenc: initialized [ 5.942071] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.951647] falcon 15a80000.nvenc1: initialized [ 5.952223] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.963958] nvdec 15480000.nvdec: initialized [ 5.964605] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.974832] nvdec 15140000.nvdec1: initialized [ 5.975366] tsec 15500000.tsec: Adding to iommu group 18 [ 5.981098] tsec 15500000.tsec: initialized [ 5.981677] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.988014] tsec 15100000.tsecb: initialized [ 5.992393] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.019270] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.032204] gpio-374 (wifi-enable): hogged as output/high [ 6.032493] gpio-431 (camera-control-output-low): hogged as output/low [ 6.032764] gpio-432 (camera-control-output-low): hogged as output/low [ 6.034836] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.037220] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.037846] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.039231] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.045298] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.050765] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.056008] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.064911] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.071715] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.083662] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.088648] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.094508] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.103044] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.112559] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.119632] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.127359] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.133326] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.143070] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.149515] pva 16000000.pva0: Adding to iommu group 22 [ 6.176259] pva 16000000.pva0: initialized [ 6.181135] pva 16800000.pva1: Adding to iommu group 23 [ 6.192800] pva 16800000.pva1: initialized [ 6.197140] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.211715] nvdla 15880000.nvdla0: initialized [ 6.213009] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.221786] nvdla 158c0000.nvdla1: initialized [ 6.225693] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.225984] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.226222] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.226412] tegradccommon 15200000.display-hub: dma mapping done [ 6.226788] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.227239] tegradc 15200000.display: Adding to iommu group 26 [ 6.227655] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.233545] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.235563] tegradc 15210000.display: Adding to iommu group 26 [ 6.236063] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.236186] generic_infoframe_type: 0x87 [ 6.236277] tegradc 15200000.display: DT parsed successfully [ 6.236366] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.239529] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.240552] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.240570] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.240574] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.241645] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.241729] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.243361] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.246730] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.251340] tegra_cec 3960000.tegra_cec: probed [ 6.252638] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.256642] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.271269] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.277829] tegradc 15210000.display: disp0 connected to head1->sor [ 6.284013] kfuse 3830000.kfuse: initialized [ 6.292184] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.300300] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.305688] tegradc 15210000.display: DT parsed successfully [ 6.311504] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.322335] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.331735] random: crng init done [ 6.334946] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.408089] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.417817] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.422340] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.431895] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.437254] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.457497] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.457968] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.460233] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.468908] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.477439] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.484107] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.491474] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.498606] usb usb1: Product: xHCI Host Controller [ 6.503845] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.510149] usb usb1: SerialNumber: 3610000.xhci [ 6.516094] hub 1-0:1.0: USB hub found [ 6.518747] hub 1-0:1.0: 4 ports detected [ 6.523444] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.528109] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.535457] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.543120] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.551065] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.558293] usb usb2: Product: xHCI Host Controller [ 6.563517] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.569734] usb usb2: SerialNumber: 3610000.xhci [ 6.575117] hub 2-0:1.0: USB hub found [ 6.578206] hub 2-0:1.0: 4 ports detected [ 6.619458] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.625698] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.627277] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.627477] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.641039] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.642132] tegra194-cpufreq ccplex: probed with BWMGR [ 6.643464] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.643946] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.644366] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.645779] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.653926] tegra194-vi5 15c10000.vi: initialized [ 6.655190] mmc0: CQHCI version 5.10 [ 6.655335] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.656728] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.661809] generic_infoframe_type: 0x87 [ 6.668296] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.672209] tegradc 15200000.display: DT parsed successfully [ 6.680370] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.684659] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.685856] tegradc 15200000.display: Display dc.000000003503afa0 registered with id=0 [ 6.692430] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.700553] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.708078] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.714629] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.723213] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.729403] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.729671] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.737555] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.737562] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.738768] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.744799] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.758640] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.770359] mmc0: Command Queue Engine enabled [ 6.770363] mmc0: periodic cache flush enabled [ 6.770374] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.770917] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.771085] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.772751] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.775021] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.779736] nvethernet 2490000.ethernet: Macsec not supported [ 6.781111] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.787287] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.789414] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.793215] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.796890] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.801392] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.810097] tegradc 15200000.display: probed [ 6.812562] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.898434] Console: switching to colour frame buffer device 240x67 [ 6.899545] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.904086] tegradc 15200000.display: fb registered [ 6.912358] tegra-se-nvhost 15810000.se: initialized [ 6.915668] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.925304] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.926961] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.933004] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.938407] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.945314] tegra-se-nvhost 15820000.se: initialized [ 6.957192] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.961954] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.964705] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.968660] tegra-se-nvhost 15830000.se: initialized [ 6.976344] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.976349] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.976357] usb 1-2: Manufacturer: Generic [ 6.982111] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.990554] hub 1-2:1.0: USB hub found [ 6.993694] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.998319] hub 1-2:1.0: 4 ports detected [ 7.003957] tegra-se-nvhost 15840000.se: initialized [ 7.013445] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.015210] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.018890] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.023916] tegra_actmon d230000.actmon: in actmon_register()... [ 7.031465] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.032086] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.045076] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.051321] Extcon AUX1(HDMI) enable [ 7.051454] tegradc 15210000.display: disp1 connected to head1->sor [ 7.059363] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.066306] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.071912] hvc_sysfs: hypervisor is not present [ 7.075100] tegradc 15210000.display: DT parsed successfully [ 7.106796] tegradc 15210000.display: Display dc.000000005920f03d registered with id=1 [ 7.114552] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.115840] ALSA device list: [ 7.116123] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.116149] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.123017] tegradc 15210000.display: probed [ 7.125438] No soundcards found. [ 7.146088] tegradc 15210000.display: fb registered [ 7.155664] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.158018] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.159677] Freeing unused kernel memory: 3968K [ 7.167027] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.175754] tegradc 15210000.display: blank - powerdown [ 7.181107] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.181662] Run /init as init process [ 7.189537] Extcon DP: HPD disabled [ 7.192958] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.196420] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.204452] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.204458] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.204480] usb 2-3: Manufacturer: Generic [ 7.227487] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.235317] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.245431] hub 2-3:1.0: USB hub found [ 7.247758] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.253894] tegradc 15200000.display: blank - powerdown [ 7.265399] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.277042] Root device found: mmcblk0p1 [ 7.279135] Found dev node: /dev/mmcblk0p1 [ 7.293376] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.297228] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.297252] Extcon AUX1(HDMI) disable [ 7.313740] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.317717] Rootfs mounted over mmcblk0p1 [ 7.320761] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.321650] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.329947] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.329952] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.334853] tegradc 15200000.display: unblank [ 7.335923] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.336108] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.341826] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.343809] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.348023] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.348026] Extcon AUX1(HDMI) enable [ 7.353826] Switching from initrd to actual rootfs [ 7.360587] tegradc 15200000.display: sync windows ret = 247 [ 7.408869] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.410313] Extcon HDMI: HPD enabled [ 7.411699] tegradc 15200000.display: hdmi: plugged [ 7.442733] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.444192] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.445587] usb 1-3: Product: Bluetooth Radio [ 7.446901] usb 1-3: Manufacturer: Realtek [ 7.448200] usb 1-3: SerialNumber: 00e04c000001 [ 7.526728] systemd[1]: System time before build time, advancing clock. [ 7.594719] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.599665] systemd[1]: Detected architecture arm64. [ 7.637559] systemd[1]: Set hostname to . [ 7.804146] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.152605] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.154391] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.159779] systemd[1]: Created slice system-modprobe.slice. [ 8.164554] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.168877] systemd[1]: Created slice User and Session Slice. [ 8.172448] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.176658] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.179983] systemd[1]: Reached target User and Group Name Lookups. [ 8.183173] systemd[1]: Reached target Slices. [ 8.186277] systemd[1]: Reached target Swap. [ 8.190180] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.193830] systemd[1]: Listening on Syslog Socket. [ 8.197327] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.200676] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.204905] systemd[1]: Listening on Journal Audit Socket. [ 8.208555] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.213868] systemd[1]: Listening on Journal Socket. [ 8.217591] systemd[1]: Listening on udev Control Socket. [ 8.222632] systemd[1]: Listening on udev Kernel Socket. [ 8.231141] systemd[1]: Mounting Huge Pages File System... [ 8.239396] systemd[1]: Mounting POSIX Message Queue File System... [ 8.247432] systemd[1]: Mounting RPC Pipe File System... [ 8.255658] systemd[1]: Mounting Kernel Debug File System... [ 8.264274] systemd[1]: Mounting Kernel Trace File System... [ 8.274047] systemd[1]: Starting Journal Service... [ 8.282769] systemd[1]: Starting Set the console keyboard layout... [ 8.291378] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.294940] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.301630] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.309813] systemd[1]: Started Nameserver information manager. [ 8.314638] systemd[1]: Reached target Network (Pre). [ 8.321649] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.323500] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.331725] systemd[1]: Starting Load Kernel Modules... [ 8.339541] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.347739] systemd[1]: Starting udev Coldplug all Devices... [ 8.359630] systemd[1]: Mounted Huge Pages File System. [ 8.363379] systemd[1]: Mounted POSIX Message Queue File System. [ 8.367095] systemd[1]: Mounted RPC Pipe File System. [ 8.370519] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.370923] systemd[1]: Mounted Kernel Debug File System. [ 8.371429] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.372188] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.376587] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.376599] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.376604] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.376773] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.378318] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.384165] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.384177] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.392607] systemd[1]: Mounted Kernel Trace File System. [ 8.400485] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.407674] systemd[1]: nvfb-udev.service: Succeeded. [ 8.412598] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.424774] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.438376] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.440182] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.447449] systemd[1]: Starting Load/Save Random Seed... [ 8.455360] systemd[1]: Starting Create System Users... [ 8.482608] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.482608] [ 8.500730] systemd[1]: Finished Load/Save Random Seed. [ 8.510836] systemd[1]: Finished Load Kernel Modules. [ 8.515803] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.524416] systemd[1]: Mounting Kernel Configuration File System... [ 8.532479] systemd[1]: Started OP-TEE Client Supplicant. [ 8.541329] systemd[1]: Starting Apply Kernel Variables... [ 8.552528] systemd[1]: Finished Set the console keyboard layout. [ 8.556974] systemd[1]: Mounted Kernel Configuration File System. [ 8.568777] systemd[1]: Finished Create System Users. [ 10.072083] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.078615] imx219 9-0010: board setup failed [ 10.079905] imx219: probe of 9-0010 failed with error -121 [ 10.092147] hot-surface-alert cooling state: 0 -> 1 [ 10.092290] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.101804] imx219 10-0010: board setup failed [ 10.103314] imx219: probe of 10-0010 failed with error -121 [ 10.643042] using random self ethernet address [ 10.643048] using random host ethernet address [ 11.513456] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.515265] Creating 1 MTD partitions on "spi6.0": [ 11.515275] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.321275] using random self ethernet address [ 12.323228] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.795308] nvidia: loading out-of-tree module taints kernel. [ 58.859453] watchdog: watchdog0: watchdog did not stop! [ 59.322181] Trying to unregister non-registered hwtime source [ 62.379910] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.381533] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [Eòÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.045] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.086] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.327] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.361] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.035] > DEVICE_PROD: device prod is not initialized. [0002.341] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.341] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.342] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.342] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.343] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.343] I> dram_block larger than 80000000 [0002.346] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.357] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.360] I> found decompressor handler: lz4 [0002.590] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.591] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: Thiÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäs OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.213] I> Welcome to NVDisp-Init [0003.213] I> NVDisp-Init version: t194-f9ecfedc [0003.214] I> CPU-BL Params @ 0xca020000 [0003.214] I> 0) Base:0x00000000 Size:0x00000000 [0003.214] I> 1) Base:0xc8300000 Size:0x00100000 [0003.215] I> 2) Base:0xc9800000 Size:0x00200000 [0003.215] I> 3) Base:0xc8600000 Size:0x00200000 [0003.218] I> 4) Base:0xc8200000 Size:0x00100000 [0003.222] I> 5) Base:0xc8100000 Size:0x00100000 [0003.226] I> 6) Base:0xc9400000 Size:0x00400000 [0003.231] I> 7) Base:0xc9000000 Size:0x00400000 [0003.235] I> 8) Base:0xc8000000 Size:0x00100000 [0003.240] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.244] I> 10) Base:0xca800000 Size:0x00800000 [0003.249] I> 11) Base:0x40000000 Size:0x00040000 [0003.253] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.258] I> 13) Base:0x40046000 Size:0x00002000 [0003.262] I> 14) Base:0x40048000 Size:0x00002000 [0003.267] I> 15) Base:0xaf000000 Size:0x00004000 [0003.271] I> 16) Base:0x4004a000 Size:0x00002000 [0003.276] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.280] I> 18) Base:0x4004c000 Size:0x00002000 [0003.285] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.289] I> 20) Base:0x4004e000 Size:0x00002000 [0003.293] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.298] I> 22) Base:0x00000000 Size:0x00000000 [0003.302] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.307] I> 24) Base:0xcc000000 Size:0x02000000 [0003.311] I> 25) Base:0x40050000 Size:0x00002000 [0003.316] I> 26) Base:0x40040000 Size:0x00006000 [0003.320] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.325] I> 28) Base:0xc8400000 Size:0x00200000 [0003.329] I> 29) Base:0xc8800000 Size:0x00400000 [0003.334] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.338] I> 31) Base:0x00000000 Size:0x00000000 [0003.343] I> 32) Base:0xf8000000 Size:0x08000000 [0003.347] I> 33) Base:0xce000000 Size:0x2a000000 [0003.351] I> 34) Base:0xcb000000 Size:0x01000000 [0003.356] I> 35) Base:0xae000000 Size:0x01000000 [0003.360] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.365] I> 37) Base:0xca000000 Size:0x00800000 [0003.369] I> 38) Base:0x80000000 Size:0x20000000 [0003.374] I> 39) Base:0xb0000000 Size:0x08000000 [0003.378] I> 40) Base:0x00000000 Size:0x00000000 [0003.383] I> 41) Base:0x00000000 Size:0x00000000 [0003.387] I> 42) Base:0x00000000 Size:0x00000000 [0003.392] I> 43) Base:0x00000000 Size:0x00000000 [0003.396] I> 44) Base:0x00000000 Size:0x00000000 [0003.401] I> 45) Base:0x00000000 Size:0x00000000 [0003.405] GIC-SPI Target CPU: 0 [0003.408] Interrupts Init done [0003.411] calling constructors [0003.414] initializing heap [0003.416] I> Heap: [0xa0960000 ... 0xadf00000] [0003.421] initializing threads [0003.424] initializing timers [0003.426] creating bootstrap completion thread [0003.431] top of bootstrap2() [0003.433] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.438] initializing platform [0003.441] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.446] W> device prod register failed [0003.450] I> Bl_dtb @0xadf00000 [0003.453] I> gpio framework initialized [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.471] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.476] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.495] I> Boot-device: QSPI [0003.497] I> Boot_device: QSPI_FLASH instance: 0 [0003.502] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.513] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.520] I> QSPI source rate = 204000 Khz [0003.523] I> Requested rate for QSPI clock = 34000 Khz [0003.528] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.533] I> tx_clk_tap_delay : 0 [0003.536] I> rx_clk_tap_delay : 16 [0003.539] I> QSPI Flash Size = 32 MB [0003.547] I> Qspi initialized successfully [0003.547] I> qspi flash-0 params source = boot args [0003.552] W> No board IDs available [0003.554] E> Failed to get board id info! [0003.560] I> sdmmc-3 params source = safe params [0003.567] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.568] W> Cannot find any partition table for 00000003 [0003.573] E> Failed to publish 00000003 [0003.578] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.609] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.651] I> edid read success [0003.651] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.652] I> width = 1280, height = 768, frequency = 79500000 [0003.652] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 4096, height = 2160, frequency = 296703296 [0003.725] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.736] I> hdmi_enable, starting HDMI initialisation [0003.741] I> hdmi_enable, HDMI initialisation complete [0003.750] initializing target [0003.750] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000663] Console: colour dummy device 80x25 [ 0.002013] printk: console [tty0] enabled [ 0.002073] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002107] pid_max: default: 32768 minimum: 301 [ 0.002361] LSM: Security Framework initializing [ 0.002433] Yama: becoming mindful. [ 0.002487] SELinux: Initializing. [ 0.002679] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002720] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005661] rcu: Hierarchical SRCU implementation. [ 0.005922] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006818] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006894] DTB Build time: Aug 10 2022 20:31:49 [ 0.009776] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010039] Remapping and enabling EFI services. [ 0.012012] smp: Bringing up secondary CPUs ... [ 0.041077] Detected PIPT I-cache on CPU1 [ 0.041172] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070658] Detected PIPT I-cache on CPU2 [ 0.070805] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100388] Detected PIPT I-cache on CPU3 [ 0.100474] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130142] Detected PIPT I-cache on CPU4 [ 0.130306] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.159933] Detected PIPT I-cache on CPU5 [ 0.160076] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160443] smp: Brought up 1 node, 6 CPUs [ 0.160616] SMP: Total of 6 processors activated. [ 0.160682] CPU features: detected: Privileged Access Never [ 0.160703] CPU features: detected: LSE atomic instructions [ 0.160717] CPU features: detected: User Access Override [ 0.160732] CPU features: detected: 32-bit EL0 Support [ 0.160744] CPU features: detected: RAS Extension Support [ 0.160756] CPU features: detected: CRC32 instructions [ 0.160769] CPU features: detected: 32-bit EL1 Support [ 0.229186] CPU: All CPU(s) started at EL2 [ 0.235518] devtmpfs: initialized [ 0.282627] Registered cp15_barrier emulation handler [ 0.282752] Registered setend emulation handler [ 0.282774] KASLR enabled [ 0.283027] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.283049] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.284359] pinctrl core: initialized pinctrl subsystem [ 0.285266] SMBIOS 3.0.0 present. [ 0.285294] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.285980] NET: Registered protocol family 16 [ 0.287862] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.288355] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.289320] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.289372] audit: initializing netlink subsys (disabled) [ 0.289585] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.290016] thermal_sys: Registered thermal governor 'step_wise' [ 0.290022] thermal_sys: Registered thermal governor 'power_allocator' [ 0.290036] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.292049] cpuidle: using governor menu [ 0.292382] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.292767] ASID allocator initialised with 32768 entries [ 0.292967] Serial: AMBA PL011 UART driver [ 0.296113] Tegra reboot handler registered. [ 0.373548] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.373692] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.373920] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.373987] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.374147] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.374200] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.374323] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.374389] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.374564] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.374613] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.376858] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.376896] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.376927] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.376959] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.376992] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.377020] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.377060] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.377096] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.377121] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.377145] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.377169] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.377193] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.377217] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.377240] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.377264] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.377287] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.377311] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.377405] mc-err: mcerr ops are set to t19x [ 0.390225] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390248] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390262] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390274] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397133] ACPI: Interpreter disabled. [ 0.398358] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.399671] iommu: Default domain type: Translated [ 0.399749] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400128] SCSI subsystem initialized [ 0.400290] usbcore: registered new interface driver usbfs [ 0.400333] usbcore: registered new interface driver hub [ 0.400368] usbcore: registered new device driver usb [ 0.400784] mc: Linux media interface: v0.10 [ 0.400822] videodev: Linux video capture interface: v2.00 [ 0.401177] pps_core: LinuxPPS API ver. 1 registered [ 0.401188] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401209] PTP clock support registered [ 0.401434] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.401726] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401807] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.402473] Registered efivars operations [ 0.409632] FPGA manager framework [ 0.409742] Advanced Linux Sound Architecture Driver Initialized. [ 0.410349] Bluetooth: Core ver 2.22 [ 0.410392] NET: Registered protocol family 31 [ 0.410408] Bluetooth: HCI device and connection manager initialized [ 0.410424] Bluetooth: HCI socket layer initialized [ 0.410439] Bluetooth: L2CAP socket layer initialized [ 0.410460] Bluetooth: SCO socket layer initialized [ 0.412731] camchar: rtcpu character device driver loaded [ 0.414039] clocksource: Switched to clocksource arch_sys_counter [ 0.894331] VFS: Disk quotas dquot_6.6.0 [ 0.894471] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.894903] pnp: PnP ACPI: disabled [ 0.910340] la/ptsa driver initialized. [ 0.910501] NET: Registered protocol family 2 [ 0.910719] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.919206] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.919297] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.919751] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.920377] TCP: Hash tables configured (established 65536 bind 65536) [ 0.920588] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.920726] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.921037] NET: Registered protocol family 1 [ 0.921806] RPC: Registered named UNIX socket transport module. [ 0.921828] RPC: Registered udp transport module. [ 0.921839] RPC: Registered tcp transport module. [ 0.921849] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.921868] PCI: CLS 0 bytes, default 64 [ 0.922189] Trying to unpack rootfs image as initramfs... [ 1.111188] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.113378] Freeing initrd memory: 8196K [ 1.117459] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.117507] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.117542] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.117813] kvm [1]: IPA Size Limit: 40 bits [ 1.118370] kvm [1]: vgic interrupt IRQ9 [ 1.118927] kvm [1]: VHE mode initialized successfully [ 1.120136] Initialise system trusted keyrings [ 1.120423] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.124892] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.125587] NFS: Registering the id_resolver key type [ 1.125614] Key type id_resolver registered [ 1.125624] Key type id_legacy registered [ 1.125686] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.125707] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.125734] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.133052] NET: Registered protocol family 38 [ 1.133072] Key type asymmetric registered [ 1.133084] Asymmetric key parser 'x509' registered [ 1.133161] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.133362] io scheduler mq-deadline registered [ 1.133376] io scheduler kyber registered [ 1.137867] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.140098] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.140159] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.140214] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.140262] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.140310] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.145125] scrncapt: init (heads:4 wins:6 planes:4) [ 1.145329] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.146225] EINJ: ACPI disabled. [ 1.148928] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.148947] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.148977] tegra-pmc: ### PMC reset level: L1 [ 1.148987] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.149032] tegra-pmc: PMC Prod config success [ 1.153020] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.157038] random: fast init done [ 1.157255] printk: console [ttyTCU0] enabled [ 2.709270] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.714487] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.718832] arm-smmu 10000000.iommu: stage 1 translation [ 2.724264] arm-smmu 10000000.iommu: stage 2 translation [ 2.729755] arm-smmu 10000000.iommu: nested translation [ 2.735353] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.742275] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.751911] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.755395] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.761952] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.769706] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.774998] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.779974] arm-smmu 12000000.iommu: stage 1 translation [ 2.785484] arm-smmu 12000000.iommu: stage 2 translation [ 2.790916] arm-smmu 12000000.iommu: nested translation [ 2.796078] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.803258] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.812567] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.816645] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.823254] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.830546] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.840340] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.843315] tegra_profiler: auth: init [ 2.847922] THERMAL EST: found 3 subdevs [ 2.851033] THERMAL EST num_resources: 0 [ 2.854894] [THERMAL EST subdev 0] [ 2.858203] [THERMAL EST subdev 1] [ 2.861859] [THERMAL EST subdev 2] [ 2.865115] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.871250] THERMAL EST: thz register success. [ 2.875809] THERMAL EST: end of probe, return err: 0 [ 2.880755] nvsciipc: loaded module [ 2.887483] tun: Universal TUN/TAP device driver, 1.6 [ 2.890105] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.896623] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.902426] e1000e: Intel(R) PRO/1000 Network Driver [ 2.907372] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.913455] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.918488] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.924633] PPP generic driver version 2.4.2 [ 2.928886] PPP BSD Compression module registered [ 2.933721] PPP Deflate Compression module registered [ 2.938712] PPP MPPE Compression module registered [ 2.943988] usbcore: registered new interface driver r8152 [ 2.949489] usbcore: registered new interface driver asix [ 2.954565] usbcore: registered new interface driver ax88179_178a [ 2.960946] usbcore: registered new interface driver cdc_ether [ 2.966890] usbcore: registered new interface driver net1080 [ 2.972234] usbcore: registered new interface driver cdc_subset [ 2.978530] usbcore: registered new interface driver zaurus [ 2.984240] usbcore: registered new interface driver cdc_ncm [ 2.989909] usbcore: registered new interface driver aqc111 [ 2.995529] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.001628] ohci-pci: OHCI PCI platform driver [ 3.005682] ohci-platform: OHCI generic platform driver [ 3.011489] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.017794] usbcore: registered new interface driver uas [ 3.022229] usbcore: registered new interface driver usb-storage [ 3.028040] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.033986] mousedev: PS/2 mouse device common for all mice [ 3.039126] usbcore: registered new interface driver xpad [ 3.047088] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.050114] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.057894] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.064208] i2c /dev entries driver [ 3.067753] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.073473] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.078850] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.083978] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.089274] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.094804] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.100234] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.112092] device-mapper: uevent: version 1.0.3 [ 3.112443] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.120564] cpuidle: Initializing cpuidle driver [ 3.124522] sdhci: Secure Digital Host Controller Interface driver [ 3.129731] sdhci: Copyright(c) Pierre Ossman [ 3.133571] Synopsys Designware Multimedia Card Interface Driver [ 3.139767] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.145928] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.146532] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.159075] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.178109] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.187343] vdd-1v0: supplied by regulator-dummy [ 3.192669] vdd-1v8-hs: supplied by regulator-dummy [ 3.197405] vdd-1v8-ls: supplied by regulator-dummy [ 3.202056] vdd-1v8-ao: supplied by regulator-dummy [ 3.205923] vddio-ddr-1v1: supplied by regulator-dummy [ 3.210256] vdd-rtc: supplied by regulator-dummy [ 3.211847] spmic-ldo1: supplied by regulator-dummy [ 3.213044] vdd-ao-3v3: supplied by regulator-dummy [ 3.219095] vddio-emmc-3v3: supplied by regulator-dummy [ 3.225240] spmic-ldo4: supplied by regulator-dummy [ 3.226435] vdd-usb-3v3: supplied by regulator-dummy [ 3.232455] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.238637] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.244108] spmic-ldo8: supplied by vdd-1v8-ls [ 3.245414] gpio-510 (gpio_default): hogged as output/high [ 3.246685] gpio-511 (gpio_default): hogged as output/high [ 3.252618] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.391320] max77686-rtc max77620-rtc: registered as rtc0 [ 3.392554] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.392832] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.114586] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.115452] hid: raw HID events driver (C) Jiri Kosina [ 4.116096] usbcore: registered new interface driver usbhid [ 4.116221] usbhid: USB HID core driver [ 4.117855] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.118933] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.130415] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.206270] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.665 ms) ÿá[ 4.204417] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.204958] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.205833] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.206491] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.207904] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.208561] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.209133] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.210431] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.210660] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.212080] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.212120] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.214589] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.214602] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.241608] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.247478] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.252684] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.259562] denver_knobs_init:MTS_VERSION:55637613 [ 4.271621] t19x_cache tegra-cache: probed [ 4.273930] optee: probing for conduit method. [ 4.274803] optee: revision 3.16 (65cc2218) [ 4.275828] optee: dynamic shared memory is enabled [ 4.279983] optee: initialized driver [ 4.287315] nvpmodel: initialized successfully [ 4.287868] tegra_hv: get_hvd: not initialized yet [ 4.291951] user_ivc_mempool: hypervisor not present [ 4.298179] usbcore: registered new interface driver snd-usb-audio [ 4.304602] u32 classifier [ 4.305859] input device check on [ 4.309588] Actions configured [ 4.313476] Initializing XFRM netlink socket [ 4.318301] NET: Registered protocol family 10 [ 4.324379] Segment Routing with IPv6 [ 4.325436] NET: Registered protocol family 17 [ 4.330242] NET: Registered protocol family 15 [ 4.334423] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.347894] Bluetooth: RFCOMM socket layer initialized [ 4.352816] Bluetooth: RFCOMM ver 1.11 [ 4.356578] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.362430] Bluetooth: HIDP socket layer initialized [ 4.368112] 9pnet: Installing 9P2000 support [ 4.371973] Key type dns_resolver registered [ 4.377609] registered taskstats version 1 [ 4.380310] Loading compiled-in X.509 certificates [ 4.392763] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.396141] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.405983] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.408326] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.416812] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.424907] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.542212] tegra194-pcie 14160000.pcie: Link up [ 4.545260] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.545476] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.545616] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.545851] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.546112] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.546531] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.546970] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.559198] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.559621] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.560063] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.561704] pci 0004:01:00.0: supports D1 D2 [ 4.561857] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.572837] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.573193] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.573463] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.573961] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.574284] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.574454] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.576982] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.584411] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.592684] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.602952] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.607632] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.613213] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.620186] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.629148] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.630895] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.639161] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.647810] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.762962] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.763462] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.763852] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.764050] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.764356] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.764669] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.765031] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.765549] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.785961] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.786514] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.788556] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.789746] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.791515] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.793334] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.794603] pci 0005:00:00.0: Removing from iommu group 7 [ 5.795140] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.829189] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.853987] host1x 13e10000.host1x: initialized [ 5.855701] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.856707] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.857757] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.858497] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.859547] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.860143] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.861090] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.861656] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.862793] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.863397] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.873118] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.879868] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.889866] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.897040] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.906901] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.913811] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.923945] falcon 15340000.vic: Adding to iommu group 17 [ 5.939118] falcon 15340000.vic: initialized [ 5.940232] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.946287] falcon 15380000.nvjpg: initialized [ 5.946881] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.957235] falcon 154c0000.nvenc: initialized [ 5.957944] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.967469] falcon 15a80000.nvenc1: initialized [ 5.968130] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.979968] nvdec 15480000.nvdec: initialized [ 5.980519] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.991140] nvdec 15140000.nvdec1: initialized [ 5.991733] tsec 15500000.tsec: Adding to iommu group 18 [ 5.997664] tsec 15500000.tsec: initialized [ 5.998271] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.004262] tsec 15100000.tsecb: initialized [ 6.008905] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.039806] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.054775] gpio-374 (wifi-enable): hogged as output/high [ 6.055113] gpio-431 (camera-control-output-low): hogged as output/low [ 6.055431] gpio-432 (camera-control-output-low): hogged as output/low [ 6.057234] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.059760] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.060453] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.061938] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.063244] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.066548] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.072308] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.080280] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.087499] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.099257] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.104122] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.109942] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.119100] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.128124] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.135424] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.142788] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.149114] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.159037] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.165030] pva 16000000.pva0: Adding to iommu group 22 [ 6.193947] pva 16000000.pva0: initialized [ 6.199094] pva 16800000.pva1: Adding to iommu group 23 [ 6.210413] pva 16800000.pva1: initialized [ 6.215041] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.235955] nvdla 15880000.nvdla0: initialized [ 6.237279] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.247067] nvdla 158c0000.nvdla1: initialized [ 6.250649] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.250884] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.250945] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.251220] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.251376] tegradccommon 15200000.display-hub: dma mapping done [ 6.252095] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.253355] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.253789] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.253997] tegradc 15200000.display: Adding to iommu group 26 [ 6.254119] tegradc 15210000.display: Adding to iommu group 26 [ 6.254626] tegra_cec 3960000.tegra_cec: probed [ 6.261110] tegradc 15210000.display: disp0 connected to head1->sor [ 6.267099] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.270865] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.285184] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.290900] tegradc 15210000.display: DT parsed successfully [ 6.297467] kfuse 3830000.kfuse: initialized [ 6.302882] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.307737] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.315774] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.321196] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.321807] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.328630] generic_infoframe_type: 0x87 [ 6.343991] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.344010] tegradc 15200000.display: DT parsed successfully [ 6.344195] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.354417] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.362995] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.380798] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.380920] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.389048] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.399057] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.406702] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.417824] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.424330] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.425718] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.450237] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.451520] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.452851] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.467153] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.472992] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.481289] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.489846] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.496730] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.504085] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.511339] usb usb1: Product: xHCI Host Controller [ 6.516336] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.522260] usb usb1: SerialNumber: 3610000.xhci [ 6.527993] hub 1-0:1.0: USB hub found [ 6.531098] hub 1-0:1.0: 4 ports detected [ 6.535650] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.540242] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.547926] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.555976] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.563692] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.570662] usb usb2: Product: xHCI Host Controller [ 6.575887] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.581839] usb usb2: SerialNumber: 3610000.xhci [ 6.587599] hub 2-0:1.0: USB hub found [ 6.590566] hub 2-0:1.0: 4 ports detected [ 6.636908] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.643883] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.645720] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.645910] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.659607] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.660772] tegra194-cpufreq ccplex: probed with BWMGR [ 6.662146] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.662634] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.663062] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.664353] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.671809] tegra194-vi5 15c10000.vi: initialized [ 6.672392] mmc0: CQHCI version 5.10 [ 6.673333] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.674244] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.674433] generic_infoframe_type: 0x87 [ 6.680885] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.684617] tegradc 15200000.display: DT parsed successfully [ 6.692810] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.697980] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.702230] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.704765] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.713596] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.720426] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.720432] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.726091] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.727047] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.735564] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.735573] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.741710] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.749604] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.755019] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.769883] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.776775] nvethernet 2490000.ethernet: Macsec not supported [ 6.778115] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.784775] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.788262] mmc0: Command Queue Engine enabled [ 6.788266] mmc0: periodic cache flush enabled [ 6.788281] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.788800] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.788964] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.792904] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.793387] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.793511] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.793643] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.794119] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.794738] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.856841] tegra-se-nvhost 15810000.se: initialized [ 6.865168] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.875665] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.877249] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.886146] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.893016] tegradc 15200000.display: probed [ 6.897663] tegra-se-nvhost 15820000.se: initialized [ 6.941376] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.945906] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.951883] Console: switching to colour frame buffer device 240x67 [ 6.952305] tegra-se-nvhost 15830000.se: initialized [ 6.957731] tegradc 15200000.display: fb registered [ 6.957797] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.963863] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.968406] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.974039] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.979803] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.985982] tegra-se-nvhost 15840000.se: initialized [ 6.988520] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.988525] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.988529] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.988532] usb 1-2: Manufacturer: Generic [ 6.989089] random: crng init done [ 6.990509] hub 1-2:1.0: USB hub found [ 6.991543] hub 1-2:1.0: 4 ports detected [ 7.039833] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.046261] tegra_actmon d230000.actmon: in actmon_register()... [ 7.050498] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.056212] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.059108] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.064184] hvc_sysfs: hypervisor is not present [ 7.073843] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.084956] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.090937] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.104802] ALSA device list: [ 7.104906] No soundcards found. [ 7.105680] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.113669] Extcon AUX1(HDMI) enable [ 7.113797] tegradc 15210000.display: disp1 connected to head1->sor [ 7.123676] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.130996] tegradc 15210000.display: DT parsed successfully [ 7.136494] tegradc 15210000.display: Display dc.00000000c0206dbe registered with id=1 [ 7.144687] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.150722] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.161114] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.163925] tegradc 15210000.display: probed [ 7.165197] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.177089] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.177097] usb 2-3: Manufacturer: Generic [ 7.185876] tegradc 15210000.display: fb registered [ 7.194179] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.198296] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.200188] Freeing unused kernel memory: 3968K [ 7.206130] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.216077] tegradc 15210000.display: blank - powerdown [ 7.221282] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.221331] hub 2-3:1.0: USB hub found [ 7.222142] Run /init as init process [ 7.229481] Extcon DP: HPD disabled [ 7.236512] hub 2-3:1.0: 4 ports detected [ 7.240409] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.251227] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.257113] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.270071] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.270105] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.270253] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.282990] tegradc 15200000.display: blank - powerdown [ 7.304115] Root device found: mmcblk0p1 [ 7.306164] Found dev node: /dev/mmcblk0p1 [ 7.326306] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.326312] Extcon AUX1(HDMI) disable [ 7.340882] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.344907] Rootfs mounted over mmcblk0p1 [ 7.349477] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.350381] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.363000] tegradc 15200000.display: unblank [ 7.364102] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.364295] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.370119] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.372071] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.375013] Switching from initrd to actual rootfs [ 7.376068] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.376072] Extcon AUX1(HDMI) enable [ 7.388837] tegradc 15200000.display: sync windows ret = 247 [ 7.418938] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.420306] Extcon HDMI: HPD enabled [ 7.421615] tegradc 15200000.display: hdmi: plugged [ 7.431254] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.432787] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.434229] usb 1-3: Product: Bluetooth Radio [ 7.437589] usb 1-3: Manufacturer: Realtek [ 7.441980] usb 1-3: SerialNumber: 00e04c000001 [ 7.518879] systemd[1]: System time before build time, advancing clock. [ 7.589962] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.595033] systemd[1]: Detected architecture arm64. [ 7.644767] systemd[1]: Set hostname to . [ 7.811718] systemd-sysv-generator[253]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.164513] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.166330] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.172183] systemd[1]: Created slice system-modprobe.slice. [ 8.177094] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.181378] systemd[1]: Created slice User and Session Slice. [ 8.184961] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.189190] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.192790] systemd[1]: Reached target User and Group Name Lookups. [ 8.196128] systemd[1]: Reached target Slices. [ 8.199318] systemd[1]: Reached target Swap. [ 8.203364] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.207150] systemd[1]: Listening on Syslog Socket. [ 8.210794] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.214286] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.218596] systemd[1]: Listening on Journal Audit Socket. [ 8.222337] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.226229] systemd[1]: Listening on Journal Socket. [ 8.231404] systemd[1]: Listening on udev Control Socket. [ 8.236305] systemd[1]: Listening on udev Kernel Socket. [ 8.244993] systemd[1]: Mounting Huge Pages File System... [ 8.253792] systemd[1]: Mounting POSIX Message Queue File System... [ 8.262245] systemd[1]: Mounting RPC Pipe File System... [ 8.270909] systemd[1]: Mounting Kernel Debug File System... [ 8.279780] systemd[1]: Mounting Kernel Trace File System... [ 8.290232] systemd[1]: Starting Journal Service... [ 8.299371] systemd[1]: Starting Set the console keyboard layout... [ 8.307680] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.311321] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.318315] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.326737] systemd[1]: Started Nameserver information manager. [ 8.332127] systemd[1]: Reached target Network (Pre). [ 8.339043] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.340864] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.349189] systemd[1]: Starting Load Kernel Modules... [ 8.357052] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.365286] systemd[1]: Starting udev Coldplug all Devices... [ 8.376377] systemd[1]: Mounted Huge Pages File System. [ 8.380085] systemd[1]: Mounted POSIX Message Queue File System. [ 8.383747] systemd[1]: Mounted RPC Pipe File System. [ 8.385514] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.392385] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.392526] systemd[1]: Mounted Kernel Debug File System. [ 8.394403] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.396966] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.398571] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.398575] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.398778] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.399005] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.399160] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.399168] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.409754] systemd[1]: Mounted Kernel Trace File System. [ 8.416531] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.421546] systemd[1]: nvfb-udev.service: Succeeded. [ 8.425995] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.436003] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.447815] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.449569] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.458196] systemd[1]: Starting Load/Save Random Seed... [ 8.466481] systemd[1]: Starting Create System Users... [ 8.495928] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.495928] [ 8.522337] systemd[1]: Finished Load/Save Random Seed. [ 8.529210] systemd[1]: Finished Load Kernel Modules. [ 8.535787] systemd[1]: Finished Create System Users. [ 8.540158] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.547487] systemd[1]: Mounting Kernel Configuration File System... [ 8.554982] systemd[1]: Started OP-TEE Client Supplicant. [ 8.564906] systemd[1]: Starting Apply Kernel Variables... [ 8.572898] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.583156] systemd[1]: Finished Set the console keyboard layout. [ 8.587253] systemd[1]: Mounted Kernel Configuration File System. [ 9.978205] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.984719] imx219 9-0010: board setup failed [ 9.984887] imx219: probe of 9-0010 failed with error -121 [ 10.010978] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.016667] imx219 10-0010: board setup failed [ 10.016755] imx219: probe of 10-0010 failed with error -121 [ 10.051731] hot-surface-alert cooling state: 0 -> 1 [ 10.835570] using random self ethernet address [ 10.837798] using random host ethernet address [ 11.451784] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.451789] Creating 1 MTD partitions on "spi6.0": [ 11.451806] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.051163] using random self ethernet address [ 12.052836] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.795955] nvidia: loading out-of-tree module taints kernel. [ 29.495971] tegradc 15200000.display: sor_poll_register 0x16: timeout [ 29.495984] tegradc 15200000.display: dc timeout waiting for HEAD MODE = SLEEP [ 59.220166] watchdog: watchdog0: watchdog did not stop! [ 59.734846] Trying to unregister non-registered hwtime source [ 62.792339] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.793899] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized cvc initialized ÿä:20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuration miÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäght be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.473] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> hdmi cable connected [0003.612] W> set volts not configured for 'vdd-1v0' [0003.620] W> set volts not configured for 'vdd-1v8-hs' [0003.620] I> retrieved tmds range from prod_list_hdmi_soc [0003.627] E> invalid display type [0003.628] E> cannot find any other nvdisp nodes [0003.645] I> edid read success [0003.657] I> edid read success [0003.657] I> width = 640, height = 480, frequency = 25174825 [0003.658] I> width = 1920, height = 1080, frequency = 148500000 [0003.658] I> width = 1280, height = 768, frequency = 79500000 [0003.659] I> width = 1360, height = 768, frequency = 85500000 [0003.659] I> width = 720, height = 480, frequency = 26973026 [0003.663] I> width = 720, height = 576, frequency = 26973026 [0003.669] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1280, height = 720, frequency = 74175824 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 1920, height = 1080, frequency = 148351648 [0003.691] I> width = 720, height = 480, frequency = 26973026 [0003.697] I> width = 720, height = 576, frequency = 26973026 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 3840, height = 2160, frequency = 296703296 [0003.725] I> width = 4096, height = 2160, frequency = 296703296 [0003.731] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.742] I> hdmi_enable, starting HDMI initialisation [0003.747] I> hdmi_enable, HDMI initialisation complete [0003.756] initializing target [0003.757] calling apps_init() [0003.758] starting app kernel_boot_app [0003.759] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000638] Console: colour dummy device 80x25 [ 0.002093] printk: console [tty0] enabled [ 0.002154] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002188] pid_max: default: 32768 minimum: 301 [ 0.002352] LSM: Security Framework initializing [ 0.002409] Yama: becoming mindful. [ 0.002451] SELinux: Initializing. [ 0.002593] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002629] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005389] rcu: Hierarchical SRCU implementation. [ 0.005629] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006352] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006401] DTB Build time: Aug 10 2022 20:31:49 [ 0.009071] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009329] Remapping and enabling EFI services. [ 0.011327] smp: Bringing up secondary CPUs ... [ 0.040705] Detected PIPT I-cache on CPU1 [ 0.040812] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073532] Detected PIPT I-cache on CPU2 [ 0.073682] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103199] Detected PIPT I-cache on CPU3 [ 0.103336] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133193] Detected PIPT I-cache on CPU4 [ 0.133334] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163665] Detected PIPT I-cache on CPU5 [ 0.163735] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164137] smp: Brought up 1 node, 6 CPUs [ 0.164314] SMP: Total of 6 processors activated. [ 0.164379] CPU features: detected: Privileged Access Never [ 0.164405] CPU features: detected: LSE atomic instructions [ 0.164419] CPU features: detected: User Access Override [ 0.164435] CPU features: detected: 32-bit EL0 Support [ 0.164448] CPU features: detected: RAS Extension Support [ 0.164460] CPU features: detected: CRC32 instructions [ 0.164472] CPU features: detected: 32-bit EL1 Support [ 0.233061] CPU: All CPU(s) started at EL2 [ 0.237669] devtmpfs: initialized [ 0.293499] Registered cp15_barrier emulation handler [ 0.293636] Registered setend emulation handler [ 0.293670] KASLR enabled [ 0.293929] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.293990] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.296019] pinctrl core: initialized pinctrl subsystem [ 0.297179] SMBIOS 3.0.0 present. [ 0.297241] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.298112] NET: Registered protocol family 16 [ 0.300993] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.301325] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.301840] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.301918] audit: initializing netlink subsys (disabled) [ 0.302246] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.302704] thermal_sys: Registered thermal governor 'step_wise' [ 0.302737] thermal_sys: Registered thermal governor 'power_allocator' [ 0.302760] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.305787] cpuidle: using governor menu [ 0.306294] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.306715] ASID allocator initialised with 32768 entries [ 0.306972] Serial: AMBA PL011 UART driver [ 0.310225] Tegra reboot handler registered. [ 0.376159] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.376306] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.376506] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376561] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376717] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376768] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376892] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.376939] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.377048] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.377095] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379391] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379425] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.379454] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379499] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379568] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379603] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379641] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379673] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379702] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379727] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379751] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379776] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379808] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379833] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379859] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379886] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379911] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.379996] mc-err: mcerr ops are set to t19x [ 0.390918] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390940] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390952] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390964] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.398802] ACPI: Interpreter disabled. [ 0.400417] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.402055] iommu: Default domain type: Translated [ 0.402150] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.402670] SCSI subsystem initialized [ 0.402866] usbcore: registered new interface driver usbfs [ 0.402913] usbcore: registered new interface driver hub [ 0.402956] usbcore: registered new device driver usb [ 0.403492] mc: Linux media interface: v0.10 [ 0.403529] videodev: Linux video capture interface: v2.00 [ 0.403910] pps_core: LinuxPPS API ver. 1 registered [ 0.403928] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403957] PTP clock support registered [ 0.404281] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404746] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.404861] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.405588] Registered efivars operations [ 0.414540] FPGA manager framework [ 0.414678] Advanced Linux Sound Architecture Driver Initialized. [ 0.415519] Bluetooth: Core ver 2.22 [ 0.415571] NET: Registered protocol family 31 [ 0.415625] Bluetooth: HCI device and connection manager initialized [ 0.415652] Bluetooth: HCI socket layer initialized [ 0.415670] Bluetooth: L2CAP socket layer initialized [ 0.415729] Bluetooth: SCO socket layer initialized [ 0.417566] camchar: rtcpu character device driver loaded [ 0.418434] clocksource: Switched to clocksource arch_sys_counter [ 0.830618] VFS: Disk quotas dquot_6.6.0 [ 0.830717] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.831192] pnp: PnP ACPI: disabled [ 0.844461] la/ptsa driver initialized. [ 0.844604] NET: Registered protocol family 2 [ 0.844815] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.852471] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.852661] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.853025] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.853666] TCP: Hash tables configured (established 65536 bind 65536) [ 0.853816] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.853954] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.854225] NET: Registered protocol family 1 [ 0.855204] RPC: Registered named UNIX socket transport module. [ 0.855225] RPC: Registered udp transport module. [ 0.855239] RPC: Registered tcp transport module. [ 0.855253] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.855313] PCI: CLS 0 bytes, default 64 [ 0.855578] Trying to unpack rootfs image as initramfs... [ 1.122585] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.125676] Freeing initrd memory: 8196K [ 1.130099] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.130134] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.130170] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.130685] kvm [1]: IPA Size Limit: 40 bits [ 1.131213] kvm [1]: vgic interrupt IRQ9 [ 1.131764] kvm [1]: VHE mode initialized successfully [ 1.133104] Initialise system trusted keyrings [ 1.133431] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.138683] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.139449] NFS: Registering the id_resolver key type [ 1.139490] Key type id_resolver registered [ 1.139530] Key type id_legacy registered [ 1.139614] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.139665] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.139707] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.149375] NET: Registered protocol family 38 [ 1.149402] Key type asymmetric registered [ 1.149418] Asymmetric key parser 'x509' registered [ 1.149474] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.149748] io scheduler mq-deadline registered [ 1.149767] io scheduler kyber registered [ 1.155591] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.158863] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.158946] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.159025] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.159125] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.159224] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.164863] scrncapt: init (heads:4 wins:6 planes:4) [ 1.165099] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.166079] EINJ: ACPI disabled. [ 1.169478] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.169504] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.169520] tegra-pmc: ### PMC reset level: L1 [ 1.169540] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.169622] tegra-pmc: PMC Prod config success [ 1.175527] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.180886] random: fast init done [ 1.181813] printk: console [ttyTCU0] enabled [ 2.733518] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.738038] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.742693] arm-smmu 10000000.iommu: stage 1 translation [ 2.747824] arm-smmu 10000000.iommu: stage 2 translation [ 2.753555] arm-smmu 10000000.iommu: nested translation [ 2.758895] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.766065] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.775917] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.778930] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.785493] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.793573] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.798533] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.803511] arm-smmu 12000000.iommu: stage 1 translation [ 2.808765] arm-smmu 12000000.iommu: stage 2 translation [ 2.814447] arm-smmu 12000000.iommu: nested translation [ 2.819623] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.826800] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.836560] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.840176] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.846736] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.854119] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.863785] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.866896] tegra_profiler: auth: init [ 2.871142] THERMAL EST: found 3 subdevs [ 2.874831] THERMAL EST num_resources: 0 [ 2.878397] [THERMAL EST subdev 0] [ 2.882005] [THERMAL EST subdev 1] [ 2.885151] [THERMAL EST subdev 2] [ 2.888662] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.894837] THERMAL EST: thz register success. [ 2.899132] THERMAL EST: end of probe, return err: 0 [ 2.904719] nvsciipc: loaded module [ 2.911486] tun: Universal TUN/TAP device driver, 1.6 [ 2.914193] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.920420] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.925712] e1000e: Intel(R) PRO/1000 Network Driver [ 2.930909] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.936725] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.942284] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.948436] PPP generic driver version 2.4.2 [ 2.952734] PPP BSD Compression module registered [ 2.957292] PPP Deflate Compression module registered [ 2.962258] PPP MPPE Compression module registered [ 2.967548] usbcore: registered new interface driver r8152 [ 2.973071] usbcore: registered new interface driver asix [ 2.978104] usbcore: registered new interface driver ax88179_178a [ 2.984229] usbcore: registered new interface driver cdc_ether [ 2.990204] usbcore: registered new interface driver net1080 [ 2.995778] usbcore: registered new interface driver cdc_subset [ 3.001845] usbcore: registered new interface driver zaurus [ 3.007775] usbcore: registered new interface driver cdc_ncm [ 3.013192] usbcore: registered new interface driver aqc111 [ 3.019098] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.025191] ohci-pci: OHCI PCI platform driver [ 3.029469] ohci-platform: OHCI generic platform driver [ 3.035123] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.041685] usbcore: registered new interface driver uas [ 3.045770] usbcore: registered new interface driver usb-storage [ 3.051904] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.057680] mousedev: PS/2 mouse device common for all mice [ 3.062925] usbcore: registered new interface driver xpad [ 3.070885] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.073632] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.081189] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.087791] i2c /dev entries driver [ 3.091093] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.096825] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.102221] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.107612] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.112941] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.118555] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.124102] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.137095] device-mapper: uevent: version 1.0.3 [ 3.137591] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.144610] cpuidle: Initializing cpuidle driver [ 3.148183] sdhci: Secure Digital Host Controller Interface driver [ 3.153273] sdhci: Copyright(c) Pierre Ossman [ 3.157114] Synopsys Designware Multimedia Card Interface Driver [ 3.163566] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.169518] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.175522] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.182610] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.207360] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.216998] vdd-1v0: supplied by regulator-dummy [ 3.222459] vdd-1v8-hs: supplied by regulator-dummy [ 3.227286] vdd-1v8-ls: supplied by regulator-dummy [ 3.232101] vdd-1v8-ao: supplied by regulator-dummy [ 3.235994] vddio-ddr-1v1: supplied by regulator-dummy [ 3.240465] vdd-rtc: supplied by regulator-dummy [ 3.242236] spmic-ldo1: supplied by regulator-dummy [ 3.243530] vdd-ao-3v3: supplied by regulator-dummy [ 3.249770] vddio-emmc-3v3: supplied by regulator-dummy [ 3.256033] spmic-ldo4: supplied by regulator-dummy [ 3.257274] vdd-usb-3v3: supplied by regulator-dummy [ 3.263480] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.269631] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.275212] spmic-ldo8: supplied by vdd-1v8-ls [ 3.276684] gpio-510 (gpio_default): hogged as output/high [ 3.278045] gpio-511 (gpio_default): hogged as output/high [ 3.281043] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.416762] max77686-rtc max77620-rtc: registered as rtc0 [ 3.417840] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.418195] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.245818] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.247013] hid: raw HID events driver (C) Jiri Kosina [ 4.247810] usbcore: registered new interface driver usbhid [ 4.247954] usbhid: USB HID core driver [ 4.249970] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.251437] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.325203] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.399397] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.003 ms) ÿá[ 4.335634] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.336226] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.337047] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.337797] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.339554] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.340120] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.340614] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.341854] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.342166] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.345119] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.352146] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.358892] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.363686] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.369837] denver_knobs_init:MTS_VERSION:55637613 [ 4.382112] t19x_cache tegra-cache: probed [ 4.385085] optee: probing for conduit method. [ 4.385892] optee: revision 3.16 (65cc2218) [ 4.386848] optee: dynamic shared memory is enabled [ 4.390633] optee: initialized driver [ 4.398174] nvpmodel: initialized successfully [ 4.398895] tegra_hv: get_hvd: not initialized yet [ 4.403118] user_ivc_mempool: hypervisor not present [ 4.408760] usbcore: registered new interface driver snd-usb-audio [ 4.415448] u32 classifier [ 4.416845] input device check on [ 4.420649] Actions configured [ 4.423942] Initializing XFRM netlink socket [ 4.428862] NET: Registered protocol family 10 [ 4.435143] Segment Routing with IPv6 [ 4.436193] NET: Registered protocol family 17 [ 4.440712] NET: Registered protocol family 15 [ 4.444872] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.458826] Bluetooth: RFCOMM socket layer initialized [ 4.463250] Bluetooth: RFCOMM ver 1.11 [ 4.467394] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.472969] Bluetooth: HIDP socket layer initialized [ 4.479170] 9pnet: Installing 9P2000 support [ 4.482317] Key type dns_resolver registered [ 4.488143] registered taskstats version 1 [ 4.490798] Loading compiled-in X.509 certificates [ 4.502178] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.507112] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.516999] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.518746] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.527612] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.535675] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.650538] tegra194-pcie 14160000.pcie: Link up [ 4.653224] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.653476] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.653628] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.653862] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.654067] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.654501] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.654923] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.667030] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.667472] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.667953] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.669510] pci 0004:01:00.0: supports D1 D2 [ 4.669669] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.677657] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.678015] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.678259] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.678789] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.679039] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.679206] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.685384] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.692717] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.701258] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.711242] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.716245] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.721562] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.728294] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.737924] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.739292] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.747678] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.755893] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.871429] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.872067] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.872246] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.872413] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.872698] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.872890] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.873268] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.873745] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.893568] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.893848] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.895736] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.897044] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.899172] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.900833] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.901877] pci 0005:00:00.0: Removing from iommu group 7 [ 5.902636] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.936641] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.956700] host1x 13e10000.host1x: initialized [ 5.958197] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.959092] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.960090] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.960662] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.961643] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.962318] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.963276] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.963810] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.964737] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.971873] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.981570] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.988421] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.998297] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.005608] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.015582] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.022271] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.032191] falcon 15340000.vic: Adding to iommu group 17 [ 6.047078] falcon 15340000.vic: initialized [ 6.048090] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.053746] falcon 15380000.nvjpg: initialized [ 6.054297] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.065565] falcon 154c0000.nvenc: initialized [ 6.066206] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.075257] falcon 15a80000.nvenc1: initialized [ 6.075808] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.087617] nvdec 15480000.nvdec: initialized [ 6.088237] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.097448] nvdec 15140000.nvdec1: initialized [ 6.097910] tsec 15500000.tsec: Adding to iommu group 18 [ 6.103890] tsec 15500000.tsec: initialized [ 6.104396] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.112281] tsec 15100000.tsecb: initialized [ 6.116180] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.142125] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.153342] gpio-374 (wifi-enable): hogged as output/high [ 6.153672] gpio-431 (camera-control-output-low): hogged as output/low [ 6.153997] gpio-432 (camera-control-output-low): hogged as output/low [ 6.155403] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.156547] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.157014] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.163651] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.169181] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.174971] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.180632] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.188388] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.196168] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.207537] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.212570] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.218550] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.227373] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.236957] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.244161] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.251684] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.257895] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.267422] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.274037] pva 16000000.pva0: Adding to iommu group 22 [ 6.301211] pva 16000000.pva0: initialized [ 6.305910] pva 16800000.pva1: Adding to iommu group 23 [ 6.317249] pva 16800000.pva1: initialized [ 6.322009] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.334806] nvdla 15880000.nvdla0: initialized [ 6.336189] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.352495] nvdla 158c0000.nvdla1: initialized [ 6.356552] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.356835] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.356934] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.357156] tegradc 15200000.display: Adding to iommu group 26 [ 6.357188] tegradccommon 15200000.display-hub: dma mapping done [ 6.357403] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.359279] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.360345] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.363191] tegra_cec 3960000.tegra_cec: probed [ 6.366853] tegradc 15210000.display: Adding to iommu group 26 [ 6.367007] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.367242] generic_infoframe_type: 0x87 [ 6.367354] tegradc 15200000.display: DT parsed successfully [ 6.367456] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.368720] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.371648] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.371660] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.371667] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.372518] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.372530] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.373901] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.380649] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.387184] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.391469] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.398529] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.403915] kfuse 3830000.kfuse: initialized [ 6.413581] tegradc 15210000.display: disp0 connected to head1->sor [ 6.420818] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.428439] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.433892] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.434641] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.440183] tegradc 15210000.display: DT parsed successfully [ 6.451511] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.456831] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.538552] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.543550] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.552921] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.558376] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.578601] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.578938] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.581422] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.589820] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.598104] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.604996] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.612611] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.619520] usb usb1: Product: xHCI Host Controller [ 6.624712] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.631013] usb usb1: SerialNumber: 3610000.xhci [ 6.636522] hub 1-0:1.0: USB hub found [ 6.639706] hub 1-0:1.0: 4 ports detected [ 6.644146] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.648751] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.656593] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.664202] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.671912] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.679180] usb usb2: Product: xHCI Host Controller [ 6.684384] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.690637] usb usb2: SerialNumber: 3610000.xhci [ 6.695962] hub 2-0:1.0: USB hub found [ 6.698914] hub 2-0:1.0: 4 ports detected [ 6.713638] random: crng init done [ 6.741147] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.747156] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.748371] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.748545] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.761791] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.762838] tegra194-cpufreq ccplex: probed with BWMGR [ 6.764113] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.764621] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.765067] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.766198] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.775529] mmc0: CQHCI version 5.10 [ 6.777134] tegra194-vi5 15c10000.vi: initialized [ 6.781016] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.782461] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.786100] generic_infoframe_type: 0x87 [ 6.792521] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.796278] tegradc 15200000.display: DT parsed successfully [ 6.804371] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.810185] tegradc 15200000.display: Display dc.00000000ae9c9a91 registered with id=0 [ 6.816514] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.825661] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.831317] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.839751] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.846184] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.852565] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.854393] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.854501] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.854509] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.854515] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.855748] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.855795] nvethernet 2490000.ethernet: Macsec not supported [ 6.857063] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.858237] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.858346] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.858534] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.859578] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.861203] tegra-se-nvhost 15810000.se: initialized [ 6.868805] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.881477] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.882941] tegradc 15200000.display: vpulse3 syncpt # 13 for dc 0 [ 6.883161] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.890231] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.898157] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.904685] tegra-se-nvhost 15820000.se: initialized [ 6.906474] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.909788] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.911973] tegradc 15200000.display: probed [ 6.919935] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.947438] mmc0: Command Queue Engine enabled [ 6.949464] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.955215] mmc0: periodic cache flush enabled [ 6.955233] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.955838] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.961992] tegra-se-nvhost 15830000.se: initialized [ 6.967711] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.979817] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.995966] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.997565] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.080828] Console: switching to colour frame buffer device 240x67 [ 7.081215] tegra-se-nvhost 15840000.se: initialized [ 7.086063] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.086070] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.086074] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.086077] usb 1-2: Manufacturer: Generic [ 7.086575] tegradc 15200000.display: fb registered [ 7.088032] hub 1-2:1.0: USB hub found [ 7.089060] hub 1-2:1.0: 4 ports detected [ 7.093240] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.099640] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.108361] tegra_actmon d230000.actmon: in actmon_register()... [ 7.140832] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.146834] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.158241] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.158610] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.172631] hvc_sysfs: hypervisor is not present [ 7.203224] ALSA device list: [ 7.203368] No soundcards found. [ 7.203527] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.240534] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.240757] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.240959] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.241084] usb 2-3: Manufacturer: Generic [ 7.252170] hub 2-3:1.0: USB hub found [ 7.254085] hub 2-3:1.0: 4 ports detected [ 7.271272] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.272597] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.272793] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.273776] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.273993] Extcon AUX1(HDMI) enable [ 7.274234] tegradc 15210000.display: disp1 connected to head1->sor [ 7.274639] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.274945] tegradc 15210000.display: DT parsed successfully [ 7.277303] tegradc 15210000.display: Display dc.000000000cd50e86 registered with id=1 [ 7.285059] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.291318] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.304172] tegradc 15210000.display: probed [ 7.304484] tegradc 15210000.display: fb registered [ 7.310438] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.314104] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.321274] Freeing unused kernel memory: 3968K [ 7.321911] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.332063] tegradc 15210000.display: blank - powerdown [ 7.337340] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.338619] Run /init as init process [ 7.345363] Extcon DP: HPD disabled [ 7.345367] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.345380] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.352800] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.358480] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.390508] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.390710] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.405922] tegradc 15200000.display: blank - powerdown [ 7.430154] Root device found: mmcblk0p1 [ 7.432252] Found dev node: /dev/mmcblk0p1 [ 7.455001] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.455007] Extcon AUX1(HDMI) disable [ 7.466867] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.470848] Rootfs mounted over mmcblk0p1 [ 7.478486] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.479396] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.493176] tegradc 15200000.display: unblank [ 7.494297] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.494486] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.500724] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.502177] Switching from initrd to actual rootfs [ 7.502601] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.506688] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.506693] Extcon AUX1(HDMI) enable [ 7.507763] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.507769] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.507773] usb 1-3: Product: Bluetooth Radio [ 7.507776] usb 1-3: Manufacturer: Realtek [ 7.507780] usb 1-3: SerialNumber: 00e04c000001 [ 7.519351] tegradc 15200000.display: sync windows ret = 247 [ 7.561102] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.568151] Extcon HDMI: HPD enabled [ 7.572016] tegradc 15200000.display: hdmi: plugged [ 7.643531] systemd[1]: System time before build time, advancing clock. [ 7.714007] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.718922] systemd[1]: Detected architecture arm64. [ 7.776444] systemd[1]: Set hostname to . [ 7.942003] systemd-sysv-generator[255]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.306483] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.308141] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.313552] systemd[1]: Created slice system-modprobe.slice. [ 8.318068] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.322025] systemd[1]: Created slice User and Session Slice. [ 8.325351] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.329306] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.332679] systemd[1]: Reached target User and Group Name Lookups. [ 8.335873] systemd[1]: Reached target Slices. [ 8.338932] systemd[1]: Reached target Swap. [ 8.342935] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.346569] systemd[1]: Listening on Syslog Socket. [ 8.350068] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.353358] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.357563] systemd[1]: Listening on Journal Audit Socket. [ 8.362522] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.367749] systemd[1]: Listening on Journal Socket. [ 8.371441] systemd[1]: Listening on udev Control Socket. [ 8.374913] systemd[1]: Listening on udev Kernel Socket. [ 8.383351] systemd[1]: Mounting Huge Pages File System... [ 8.391831] systemd[1]: Mounting POSIX Message Queue File System... [ 8.399776] systemd[1]: Mounting RPC Pipe File System... [ 8.408313] systemd[1]: Mounting Kernel Debug File System... [ 8.417090] systemd[1]: Mounting Kernel Trace File System... [ 8.427197] systemd[1]: Starting Journal Service... [ 8.435938] systemd[1]: Starting Set the console keyboard layout... [ 8.444047] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.447551] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.453853] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.462146] systemd[1]: Started Nameserver information manager. [ 8.468165] systemd[1]: Reached target Network (Pre). [ 8.475700] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.475888] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.485571] systemd[1]: Starting Load Kernel Modules... [ 8.493288] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.501399] systemd[1]: Starting udev Coldplug all Devices... [ 8.511739] systemd[1]: Mounted Huge Pages File System. [ 8.516455] systemd[1]: Mounted POSIX Message Queue File System. [ 8.520075] systemd[1]: Mounted RPC Pipe File System. [ 8.522842] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.523541] systemd[1]: Mounted Kernel Debug File System. [ 8.528563] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.530151] systemd[1]: Mounted Kernel Trace File System. [ 8.530878] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.533013] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.533027] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.533035] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.533224] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.533459] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.533641] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.533654] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.553633] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.561831] systemd[1]: nvfb-udev.service: Succeeded. [ 8.566370] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.577443] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.582667] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.584403] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.600212] systemd[1]: Starting Load/Save Random Seed... [ 8.607858] systemd[1]: Starting Create System Users... [ 8.645194] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.645194] [ 8.652689] systemd[1]: Finished Load/Save Random Seed. [ 8.664533] systemd[1]: Finished Create System Users. [ 8.672687] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.679937] systemd[1]: Finished Load Kernel Modules. [ 8.684338] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.691219] systemd[1]: Mounting Kernel Configuration File System... [ 8.699552] systemd[1]: Started OP-TEE Client Supplicant. [ 8.708136] systemd[1]: Starting Apply Kernel Variables... [ 8.719263] systemd[1]: Finished Set the console keyboard layout. [ 8.723496] systemd[1]: Mounted Kernel Configuration File System. [ 8.735859] systemd[1]: Finished Create Static Device Nodes in /dev. [ 10.087073] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.093542] imx219 9-0010: board setup failed [ 10.093638] imx219: probe of 9-0010 failed with error -121 [ 10.110269] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.116700] imx219 10-0010: board setup failed [ 10.117947] imx219: probe of 10-0010 failed with error -121 [ 10.242878] hot-surface-alert cooling state: 0 -> 1 [ 10.861571] using random self ethernet address [ 10.878478] using random host ethernet address [ 11.675413] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.675420] Creating 1 MTD partitions on "spi6.0": [ 11.675430] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.338650] using random self ethernet address [ 12.340184] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.797501] nvidia: loading out-of-tree module taints kernel. [ 57.824012] watchdog: watchdog0: watchdog did not stop! [ 58.264014] Trying to unregister non-registered hwtime source [ 61.320843] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.322399] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.327] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.345] W> Cannot find any partition table for 00000003 [0001.346] > PARTITION_MANAGER: Failed to publish partition. [0001.361] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.034] I> Relocating BR-BCT [0002.035] > DEVICE_PROD: device prod is not initialized. [0002.341] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.342] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.343] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.343] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.343] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.344] I> dram_block larger than 80000000 [0002.346] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.358] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.361] I> found decompressor handler: lz4 [0002.590] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.591] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized cvc initialized ÿä:20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuration miÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäght be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.212] I> Welcome to NVDisp-Init [0003.212] I> NVDisp-Init version: t194-f9ecfedc [0003.212] I> CPU-BL Params @ 0xca020000 [0003.213] I> 0) Base:0x00000000 Size:0x00000000 [0003.213] I> 1) Base:0xc8300000 Size:0x00100000 [0003.213] I> 2) Base:0xc9800000 Size:0x00200000 [0003.214] I> 3) Base:0xc8600000 Size:0x00200000 [0003.216] I> 4) Base:0xc8200000 Size:0x00100000 [0003.221] I> 5) Base:0xc8100000 Size:0x00100000 [0003.225] I> 6) Base:0xc9400000 Size:0x00400000 [0003.229] I> 7) Base:0xc9000000 Size:0x00400000 [0003.234] I> 8) Base:0xc8000000 Size:0x00100000 [0003.238] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.243] I> 10) Base:0xca800000 Size:0x00800000 [0003.247] I> 11) Base:0x40000000 Size:0x00040000 [0003.252] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.256] I> 13) Base:0x40046000 Size:0x00002000 [0003.261] I> 14) Base:0x40048000 Size:0x00002000 [0003.265] I> 15) Base:0xaf000000 Size:0x00004000 [0003.270] I> 16) Base:0x4004a000 Size:0x00002000 [0003.274] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.279] I> 18) Base:0x4004c000 Size:0x00002000 [0003.283] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.287] I> 20) Base:0x4004e000 Size:0x00002000 [0003.292] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.296] I> 22) Base:0x00000000 Size:0x00000000 [0003.301] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.305] I> 24) Base:0xcc000000 Size:0x02000000 [0003.310] I> 25) Base:0x40050000 Size:0x00002000 [0003.314] I> 26) Base:0x40040000 Size:0x00006000 [0003.319] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.323] I> 28) Base:0xc8400000 Size:0x00200000 [0003.328] I> 29) Base:0xc8800000 Size:0x00400000 [0003.332] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.337] I> 31) Base:0x00000000 Size:0x00000000 [0003.341] I> 32) Base:0xf8000000 Size:0x08000000 [0003.345] I> 33) Base:0xce000000 Size:0x2a000000 [0003.350] I> 34) Base:0xcb000000 Size:0x01000000 [0003.354] I> 35) Base:0xae000000 Size:0x01000000 [0003.359] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.363] I> 37) Base:0xca000000 Size:0x00800000 [0003.368] I> 38) Base:0x80000000 Size:0x20000000 [0003.372] I> 39) Base:0xb0000000 Size:0x08000000 [0003.377] I> 40) Base:0x00000000 Size:0x00000000 [0003.381] I> 41) Base:0x00000000 Size:0x00000000 [0003.386] I> 42) Base:0x00000000 Size:0x00000000 [0003.390] I> 43) Base:0x00000000 Size:0x00000000 [0003.395] I> 44) Base:0x00000000 Size:0x00000000 [0003.399] I> 45) Base:0x00000000 Size:0x00000000 [0003.403] GIC-SPI Target CPU: 0 [0003.406] Interrupts Init done [0003.409] calling constructors [0003.412] initializing heap [0003.415] I> Heap: [0xa0960000 ... 0xadf00000] [0003.419] initializing threads [0003.422] initializing timers [0003.425] creating bootstrap completion thread [0003.429] top of bootstrap2() [0003.432] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.437] initializing platform [0003.440] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.445] W> device prod register failed [0003.449] I> Bl_dtb @0xadf00000 [0003.452] I> gpio framework initialized [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.469] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.474] I> fixed regulator driver initialized [0003.491] I> register 'maxim' power off handle [0003.493] I> virtual i2c enabled [0003.493] I> registered 'maxim,max20024' pmic [0003.494] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.494] I> Boot-device: QSPI [0003.496] I> Boot_device: QSPI_FLASH instance: 0 [0003.500] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.511] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.518] I> QSPI source rate = 204000 Khz [0003.521] I> Requested rate for QSPI clock = 34000 Khz [0003.527] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.531] I> tx_clk_tap_delay : 0 [0003.534] I> rx_clk_tap_delay : 16 [0003.537] I> QSPI Flash Size = 32 MB [0003.545] I> Qspi initialized successfully [0003.546] I> qspi flash-0 params source = boot args [0003.550] W> No board IDs available [0003.553] E> Failed to get board id info! [0003.559] I> sdmmc-3 params source = safe params [0003.566] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.567] W> Cannot find any partition table for 00000003 [0003.572] E> Failed to publish 00000003 [0003.577] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> hdmi cable connected [0003.609] W> set volts not configured for 'vdd-1v0' [0003.614] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.650] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.750] initializing target [0003.750] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000669] Console: colour dummy device 80x25 [ 0.002039] printk: console [tty0] enabled [ 0.002100] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002135] pid_max: default: 32768 minimum: 301 [ 0.002300] LSM: Security Framework initializing [ 0.002358] Yama: becoming mindful. [ 0.002401] SELinux: Initializing. [ 0.002552] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002591] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005738] rcu: Hierarchical SRCU implementation. [ 0.005983] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006682] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006750] DTB Build time: Aug 10 2022 20:31:49 [ 0.009459] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009695] Remapping and enabling EFI services. [ 0.011732] smp: Bringing up secondary CPUs ... [ 0.044911] Detected PIPT I-cache on CPU1 [ 0.044987] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074402] Detected PIPT I-cache on CPU2 [ 0.074554] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104012] Detected PIPT I-cache on CPU3 [ 0.104156] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133832] Detected PIPT I-cache on CPU4 [ 0.134008] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163700] Detected PIPT I-cache on CPU5 [ 0.163860] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164207] smp: Brought up 1 node, 6 CPUs [ 0.164421] SMP: Total of 6 processors activated. [ 0.164481] CPU features: detected: Privileged Access Never [ 0.164502] CPU features: detected: LSE atomic instructions [ 0.164516] CPU features: detected: User Access Override [ 0.164529] CPU features: detected: 32-bit EL0 Support [ 0.164542] CPU features: detected: RAS Extension Support [ 0.164554] CPU features: detected: CRC32 instructions [ 0.164567] CPU features: detected: 32-bit EL1 Support [ 0.232302] CPU: All CPU(s) started at EL2 [ 0.239626] devtmpfs: initialized [ 0.286768] Registered cp15_barrier emulation handler [ 0.286912] Registered setend emulation handler [ 0.286933] KASLR enabled [ 0.287199] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287223] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289330] pinctrl core: initialized pinctrl subsystem [ 0.290261] SMBIOS 3.0.0 present. [ 0.290304] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.290898] NET: Registered protocol family 16 [ 0.292993] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293540] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294561] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294612] audit: initializing netlink subsys (disabled) [ 0.294906] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.295349] thermal_sys: Registered thermal governor 'step_wise' [ 0.295356] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295373] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.297709] cpuidle: using governor menu [ 0.298071] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.298461] ASID allocator initialised with 32768 entries [ 0.298719] Serial: AMBA PL011 UART driver [ 0.301914] Tegra reboot handler registered. [ 0.372956] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.373130] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.373315] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.373360] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.373496] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.373539] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.373691] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.373806] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.373983] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.374024] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.376512] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.376549] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.376578] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.376605] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.376635] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.376663] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.376700] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.376731] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.376756] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.376780] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.376803] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.376827] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.376851] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.376913] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.376942] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.376968] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.377013] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.377104] mc-err: mcerr ops are set to t19x [ 0.389249] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.389273] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.389286] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.389299] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397213] ACPI: Interpreter disabled. [ 0.398374] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.399644] iommu: Default domain type: Translated [ 0.399718] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400160] SCSI subsystem initialized [ 0.400307] usbcore: registered new interface driver usbfs [ 0.400346] usbcore: registered new interface driver hub [ 0.400379] usbcore: registered new device driver usb [ 0.400791] mc: Linux media interface: v0.10 [ 0.400824] videodev: Linux video capture interface: v2.00 [ 0.401103] pps_core: LinuxPPS API ver. 1 registered [ 0.401123] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401144] PTP clock support registered [ 0.401375] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.401670] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401753] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.402326] Registered efivars operations [ 0.407080] FPGA manager framework [ 0.407209] Advanced Linux Sound Architecture Driver Initialized. [ 0.407816] Bluetooth: Core ver 2.22 [ 0.407876] NET: Registered protocol family 31 [ 0.407888] Bluetooth: HCI device and connection manager initialized [ 0.407903] Bluetooth: HCI socket layer initialized [ 0.407918] Bluetooth: L2CAP socket layer initialized [ 0.407939] Bluetooth: SCO socket layer initialized [ 0.409529] camchar: rtcpu character device driver loaded [ 0.410288] clocksource: Switched to clocksource arch_sys_counter [ 0.748741] VFS: Disk quotas dquot_6.6.0 [ 0.748809] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.749102] pnp: PnP ACPI: disabled [ 0.760469] la/ptsa driver initialized. [ 0.760595] NET: Registered protocol family 2 [ 0.760766] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.766067] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.766187] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.766473] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.766906] TCP: Hash tables configured (established 65536 bind 65536) [ 0.767071] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.767163] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.767374] NET: Registered protocol family 1 [ 0.768027] RPC: Registered named UNIX socket transport module. [ 0.768041] RPC: Registered udp transport module. [ 0.768051] RPC: Registered tcp transport module. [ 0.768063] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.768091] PCI: CLS 0 bytes, default 64 [ 0.768260] Trying to unpack rootfs image as initramfs... [ 0.950210] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.952477] Freeing initrd memory: 8196K [ 0.956234] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.956273] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.956306] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.956682] kvm [1]: IPA Size Limit: 40 bits [ 0.957126] kvm [1]: vgic interrupt IRQ9 [ 0.957607] kvm [1]: VHE mode initialized successfully [ 0.958919] Initialise system trusted keyrings [ 0.959159] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.963044] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.963629] NFS: Registering the id_resolver key type [ 0.963655] Key type id_resolver registered [ 0.963685] Key type id_legacy registered [ 0.963746] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.963764] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.963792] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.971063] NET: Registered protocol family 38 [ 0.971084] Key type asymmetric registered [ 0.971095] Asymmetric key parser 'x509' registered [ 0.971134] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.971315] io scheduler mq-deadline registered [ 0.971330] io scheduler kyber registered [ 0.975720] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.977697] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.977772] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.977840] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.977890] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.977939] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.981603] scrncapt: init (heads:4 wins:6 planes:4) [ 0.982012] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.982625] EINJ: ACPI disabled. [ 0.984909] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.984948] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.984960] tegra-pmc: ### PMC reset level: L1 [ 0.984970] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.985010] tegra-pmc: PMC Prod config success [ 0.989268] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.993335] random: fast init done [ 0.993391] printk: console [ttyTCU0] enabled [ 2.546047] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.550654] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.555208] arm-smmu 10000000.iommu: stage 1 translation [ 2.560419] arm-smmu 10000000.iommu: stage 2 translation [ 2.566171] arm-smmu 10000000.iommu: nested translation [ 2.571254] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.578683] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.589093] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.591581] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.598368] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.605915] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.611423] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.616137] arm-smmu 12000000.iommu: stage 1 translation [ 2.621384] arm-smmu 12000000.iommu: stage 2 translation [ 2.626807] arm-smmu 12000000.iommu: nested translation [ 2.632493] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.639673] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.650234] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.652793] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.659096] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.666567] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.676023] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.679515] tegra_profiler: auth: init [ 2.684036] THERMAL EST: found 3 subdevs [ 2.687194] THERMAL EST num_resources: 0 [ 2.691300] [THERMAL EST subdev 0] [ 2.694357] [THERMAL EST subdev 1] [ 2.698009] [THERMAL EST subdev 2] [ 2.701013] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.707471] THERMAL EST: thz register success. [ 2.711714] THERMAL EST: end of probe, return err: 0 [ 2.717304] nvsciipc: loaded module [ 2.724324] tun: Universal TUN/TAP device driver, 1.6 [ 2.726697] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.733027] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.738369] e1000e: Intel(R) PRO/1000 Network Driver [ 2.743529] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.749611] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.754654] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.760916] PPP generic driver version 2.4.2 [ 2.765044] PPP BSD Compression module registered [ 2.769876] PPP Deflate Compression module registered [ 2.775124] PPP MPPE Compression module registered [ 2.779883] usbcore: registered new interface driver r8152 [ 2.785646] usbcore: registered new interface driver asix [ 2.790797] usbcore: registered new interface driver ax88179_178a [ 2.796856] usbcore: registered new interface driver cdc_ether [ 2.802809] usbcore: registered new interface driver net1080 [ 2.808396] usbcore: registered new interface driver cdc_subset [ 2.814732] usbcore: registered new interface driver zaurus [ 2.820393] usbcore: registered new interface driver cdc_ncm [ 2.825807] usbcore: registered new interface driver aqc111 [ 2.831445] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.837784] ohci-pci: OHCI PCI platform driver [ 2.842091] ohci-platform: OHCI generic platform driver [ 2.847939] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.853974] usbcore: registered new interface driver uas [ 2.858136] usbcore: registered new interface driver usb-storage [ 2.864535] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.870253] mousedev: PS/2 mouse device common for all mice [ 2.875297] usbcore: registered new interface driver xpad [ 2.883155] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.886249] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.894064] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.900613] i2c /dev entries driver [ 2.903707] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.909485] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.915280] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.920201] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.925547] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.931079] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.936475] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.949862] device-mapper: uevent: version 1.0.3 [ 2.950331] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.957160] cpuidle: Initializing cpuidle driver [ 2.961030] sdhci: Secure Digital Host Controller Interface driver [ 2.965618] sdhci: Copyright(c) Pierre Ossman [ 2.969718] Synopsys Designware Multimedia Card Interface Driver [ 2.975913] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.981868] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.982553] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.995363] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.012494] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.021663] vdd-1v0: supplied by regulator-dummy [ 3.027081] vdd-1v8-hs: supplied by regulator-dummy [ 3.031739] vdd-1v8-ls: supplied by regulator-dummy [ 3.036376] vdd-1v8-ao: supplied by regulator-dummy [ 3.040217] vddio-ddr-1v1: supplied by regulator-dummy [ 3.044512] vdd-rtc: supplied by regulator-dummy [ 3.046096] spmic-ldo1: supplied by regulator-dummy [ 3.047324] vdd-ao-3v3: supplied by regulator-dummy [ 3.053316] vddio-emmc-3v3: supplied by regulator-dummy [ 3.059440] spmic-ldo4: supplied by regulator-dummy [ 3.060612] vdd-usb-3v3: supplied by regulator-dummy [ 3.066981] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.073098] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.078531] spmic-ldo8: supplied by vdd-1v8-ls [ 3.079837] gpio-510 (gpio_default): hogged as output/high [ 3.082116] gpio-511 (gpio_default): hogged as output/high [ 3.088756] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.227459] max77686-rtc max77620-rtc: registered as rtc0 [ 3.228689] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.228983] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.950037] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.951103] hid: raw HID events driver (C) Jiri Kosina [ 3.951778] usbcore: registered new interface driver usbhid [ 3.951925] usbhid: USB HID core driver [ 3.953618] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.954824] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.996243] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.071648] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.216 ms) ÿá[ 4.039777] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.040327] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.041212] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.041949] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.043787] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.044476] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.045155] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.046561] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.046921] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.049009] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.056050] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.062871] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.067988] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.074629] denver_knobs_init:MTS_VERSION:55637613 [ 4.086156] t19x_cache tegra-cache: probed [ 4.088814] optee: probing for conduit method. [ 4.089617] optee: revision 3.16 (65cc2218) [ 4.090397] optee: dynamic shared memory is enabled [ 4.095127] optee: initialized driver [ 4.100804] nvpmodel: initialized successfully [ 4.102741] tegra_hv: get_hvd: not initialized yet [ 4.107322] user_ivc_mempool: hypervisor not present [ 4.112938] usbcore: registered new interface driver snd-usb-audio [ 4.119587] u32 classifier [ 4.120837] input device check on [ 4.124554] Actions configured [ 4.128485] Initializing XFRM netlink socket [ 4.133419] NET: Registered protocol family 10 [ 4.140257] Segment Routing with IPv6 [ 4.140631] NET: Registered protocol family 17 [ 4.144908] NET: Registered protocol family 15 [ 4.149147] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.162606] Bluetooth: RFCOMM socket layer initialized [ 4.167418] Bluetooth: RFCOMM ver 1.11 [ 4.171544] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.177148] Bluetooth: HIDP socket layer initialized [ 4.183443] 9pnet: Installing 9P2000 support [ 4.186594] Key type dns_resolver registered [ 4.192199] registered taskstats version 1 [ 4.195273] Loading compiled-in X.509 certificates [ 4.208095] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.210825] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.221174] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.222981] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.231760] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.239950] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.354453] tegra194-pcie 14160000.pcie: Link up [ 4.357309] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.357500] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.357793] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.358034] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.358324] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.358762] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.359218] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.371614] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.372193] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.372630] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.374473] pci 0004:01:00.0: supports D1 D2 [ 4.374642] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.385771] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.386152] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.386514] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.386920] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.387174] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.387375] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.388963] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.396386] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.405170] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.415545] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.419990] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.425284] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.432297] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.440933] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.442867] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.451577] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.459789] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.575210] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.575745] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.575926] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.576220] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.576501] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.576782] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.577226] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.577640] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.597975] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.598971] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.600741] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.602203] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.603787] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.605324] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.606248] pci 0005:00:00.0: Removing from iommu group 7 [ 5.606691] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.641354] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.665434] host1x 13e10000.host1x: initialized [ 5.667369] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.668242] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.669633] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.670538] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.671962] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.672631] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.673832] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.674713] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.675661] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.676276] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.685208] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.692183] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.702100] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.709382] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.719340] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.726374] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.736026] falcon 15340000.vic: Adding to iommu group 17 [ 5.751011] falcon 15340000.vic: initialized [ 5.751993] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.757434] falcon 15380000.nvjpg: initialized [ 5.758012] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.769626] falcon 154c0000.nvenc: initialized [ 5.770175] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.780695] falcon 15a80000.nvenc1: initialized [ 5.781374] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.793945] nvdec 15480000.nvdec: initialized [ 5.795015] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.805927] nvdec 15140000.nvdec1: initialized [ 5.806598] tsec 15500000.tsec: Adding to iommu group 18 [ 5.812415] tsec 15500000.tsec: initialized [ 5.812911] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.817816] tsec 15100000.tsecb: initialized [ 5.821884] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.851232] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.864981] gpio-374 (wifi-enable): hogged as output/high [ 5.865295] gpio-431 (camera-control-output-low): hogged as output/low [ 5.865616] gpio-432 (camera-control-output-low): hogged as output/low [ 5.867593] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.869660] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.870173] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.871697] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.873053] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.878749] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.884229] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.892551] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.899829] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.911317] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.916791] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.922344] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.931144] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.940699] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.947595] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.955175] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.961381] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.971066] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.977371] pva 16000000.pva0: Adding to iommu group 22 [ 6.004286] pva 16000000.pva0: initialized [ 6.008733] pva 16800000.pva1: Adding to iommu group 23 [ 6.019412] pva 16800000.pva1: initialized [ 6.024256] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.038735] nvdla 15880000.nvdla0: initialized [ 6.040254] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.056925] nvdla 158c0000.nvdla1: initialized [ 6.060798] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.061226] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.061929] tegradc 15210000.display: Adding to iommu group 26 [ 6.061995] tegradc 15200000.display: Adding to iommu group 26 [ 6.063441] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.064182] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.064703] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.065018] tegra_cec 3960000.tegra_cec: probed [ 6.066237] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.066939] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.071946] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.075653] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.082742] kfuse 3830000.kfuse: initialized [ 6.089984] tegradccommon 15200000.display-hub: dma mapping done [ 6.094684] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.106623] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.113662] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.119714] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.129026] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.134414] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.143606] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.149315] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.170388] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.170806] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.172154] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.180460] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.189125] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.195670] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.203302] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.210394] usb usb1: Product: xHCI Host Controller [ 6.215367] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.221669] usb usb1: SerialNumber: 3610000.xhci [ 6.227452] hub 1-0:1.0: USB hub found [ 6.230265] hub 1-0:1.0: 4 ports detected [ 6.235234] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.239895] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.247260] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.255040] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.263076] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.270316] usb usb2: Product: xHCI Host Controller [ 6.275042] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.281307] usb usb2: SerialNumber: 3610000.xhci [ 6.287205] hub 2-0:1.0: USB hub found [ 6.289682] hub 2-0:1.0: 4 ports detected [ 6.333227] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.339259] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.341018] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.341213] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.341264] random: crng init done [ 6.354751] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.355843] tegra194-cpufreq ccplex: probed with BWMGR [ 6.356737] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.357310] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.357710] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.358974] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.368218] mmc0: CQHCI version 5.10 [ 6.369634] tegra194-vi5 15c10000.vi: initialized [ 6.371882] tegradc 15210000.display: disp0 connected to head1->sor [ 6.375314] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.376730] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.383177] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.390366] tegradc 15210000.display: DT parsed successfully [ 6.398320] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.404207] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.410588] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.418728] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.425088] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.425093] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.431737] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.437972] generic_infoframe_type: 0x87 [ 6.444432] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.444439] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.457023] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.461647] tegradc 15200000.display: DT parsed successfully [ 6.482385] tegradc 15200000.display: Display dc.00000000812b2722 registered with id=0 [ 6.490839] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.491880] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.502311] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.505711] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.512425] nvethernet 2490000.ethernet: Macsec not supported [ 6.526779] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.535201] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.540664] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.540755] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.549757] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.555232] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.560659] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.578437] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.579229] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.586324] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.592927] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.608908] tegra-se-nvhost 15810000.se: initialized [ 6.610183] tegradc 15200000.display: probed [ 6.616738] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.622932] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.629178] tegra-se-nvhost 15820000.se: initialized [ 6.635675] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.640423] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.646709] tegra-se-nvhost 15830000.se: initialized [ 6.651975] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.657500] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.664299] tegra-se-nvhost 15840000.se: initialized [ 6.668394] Console: switching to colour frame buffer device 240x67 [ 6.670205] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.670239] mmc0: Command Queue Engine enabled [ 6.670244] mmc0: periodic cache flush enabled [ 6.670261] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.670816] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.670989] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.674227] tegradc 15200000.display: fb registered [ 6.674314] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.682099] tegra_actmon d230000.actmon: in actmon_register()... [ 6.700615] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.707887] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.708034] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.708371] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.708998] hvc_sysfs: hypervisor is not present [ 6.712511] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.736142] ALSA device list: [ 6.736161] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.738261] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.743353] No soundcards found. [ 6.784359] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.788770] usb 1-2: Manufacturer: Generic [ 6.794977] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.796074] hub 1-2:1.0: USB hub found [ 6.807262] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.807927] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.809335] hub 1-2:1.0: 4 ports detected [ 6.813606] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.814465] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.840104] Extcon AUX1(HDMI) enable [ 6.844173] tegradc 15210000.display: disp1 connected to head1->sor [ 6.850385] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.855817] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.857429] tegradc 15210000.display: DT parsed successfully [ 6.865744] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.871454] tegradc 15210000.display: Display dc.00000000afe326ac registered with id=1 [ 6.878350] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.886773] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.891118] usb 2-3: Manufacturer: Generic [ 6.901618] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.901911] hub 2-3:1.0: USB hub found [ 6.913668] hub 2-3:1.0: 4 ports detected [ 6.914705] tegradc 15210000.display: probed [ 6.920610] tegradc 15210000.display: fb registered [ 6.928761] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.932596] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.934603] Freeing unused kernel memory: 3968K [ 6.940394] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.950445] tegradc 15210000.display: blank - powerdown [ 6.955233] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.963585] Extcon DP: HPD disabled [ 6.967020] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.973963] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.979591] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.982325] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 6.982410] Run /init as init process ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.003160] tegradc 15200000.display: blank - powerdown [ 7.045397] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.045402] Extcon AUX1(HDMI) disable [ 7.046750] Root device found: mmcblk0p1 [ 7.048835] Found dev node: /dev/mmcblk0p1 [ 7.068571] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.069563] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.074337] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.074342] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.082896] tegradc 15200000.display: unblank [ 7.084300] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.084468] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.084498] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.089346] Rootfs mounted over mmcblk0p1 [ 7.090677] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.092636] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.096685] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.096689] Extcon AUX1(HDMI) enable [ 7.109386] tegradc 15200000.display: sync windows ret = 247 [ 7.126356] Switching from initrd to actual rootfs [ 7.144118] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.145748] Extcon HDMI: HPD enabled [ 7.147239] tegradc 15200000.display: hdmi: plugged [ 7.151497] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.158898] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.166016] usb 1-3: Product: Bluetooth Radio [ 7.170478] usb 1-3: Manufacturer: Realtek [ 7.174352] usb 1-3: SerialNumber: 00e04c000001 [ 7.294851] systemd[1]: System time before build time, advancing clock. [ 7.365325] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.370472] systemd[1]: Detected architecture arm64. [ 7.411444] systemd[1]: Set hostname to . [ 7.584649] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.937043] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.938891] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.944486] systemd[1]: Created slice system-modprobe.slice. [ 7.949492] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.953806] systemd[1]: Created slice User and Session Slice. [ 7.957393] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.961824] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.965333] systemd[1]: Reached target User and Group Name Lookups. [ 7.968734] systemd[1]: Reached target Slices. [ 7.971963] systemd[1]: Reached target Swap. [ 7.976110] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.979905] systemd[1]: Listening on Syslog Socket. [ 7.983573] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.987090] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.991365] systemd[1]: Listening on Journal Audit Socket. [ 7.995046] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.998934] systemd[1]: Listening on Journal Socket. [ 8.002740] systemd[1]: Listening on udev Control Socket. [ 8.006319] systemd[1]: Listening on udev Kernel Socket. [ 8.014836] systemd[1]: Mounting Huge Pages File System... [ 8.023060] systemd[1]: Mounting POSIX Message Queue File System... [ 8.030940] systemd[1]: Mounting RPC Pipe File System... [ 8.039353] systemd[1]: Mounting Kernel Debug File System... [ 8.050752] systemd[1]: Mounting Kernel Trace File System... [ 8.060525] systemd[1]: Starting Journal Service... [ 8.069145] systemd[1]: Starting Set the console keyboard layout... [ 8.077346] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.080973] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.087170] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.095214] systemd[1]: Started Nameserver information manager. [ 8.100186] systemd[1]: Reached target Network (Pre). [ 8.107951] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.109757] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.118136] systemd[1]: Starting Load Kernel Modules... [ 8.126000] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.133611] systemd[1]: Starting udev Coldplug all Devices... [ 8.145010] systemd[1]: Mounted Huge Pages File System. [ 8.148830] systemd[1]: Mounted POSIX Message Queue File System. [ 8.152426] systemd[1]: Mounted RPC Pipe File System. [ 8.155467] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.155971] systemd[1]: Mounted Kernel Debug File System. [ 8.161632] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.163116] systemd[1]: Mounted Kernel Trace File System. [ 8.163583] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.166018] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.166031] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.166036] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.166374] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.168059] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.174024] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.174034] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.182745] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.191244] systemd[1]: nvfb-udev.service: Succeeded. [ 8.195804] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.209424] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.214581] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.216377] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.234444] systemd[1]: Starting Load/Save Random Seed... [ 8.242038] systemd[1]: Starting Create System Users... [ 8.280590] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.280590] [ 8.291487] systemd[1]: Finished Load/Save Random Seed. [ 8.303685] systemd[1]: Finished Create System Users. [ 8.311561] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.318992] systemd[1]: Finished Load Kernel Modules. [ 8.323748] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.331707] systemd[1]: Mounting Kernel Configuration File System... [ 8.339248] systemd[1]: Started OP-TEE Client Supplicant. [ 8.349188] systemd[1]: Starting Apply Kernel Variables... [ 8.360051] systemd[1]: Finished Set the console keyboard layout. [ 8.364293] systemd[1]: Mounted Kernel Configuration File System. [ 9.770606] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.786375] imx219 9-0010: board setup failed [ 9.787674] imx219: probe of 9-0010 failed with error -121 [ 9.809189] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.814464] imx219 10-0010: board setup failed [ 9.815888] imx219: probe of 10-0010 failed with error -121 [ 9.907572] hot-surface-alert cooling state: 0 -> 1 [ 10.678704] using random self ethernet address [ 10.680391] using random host ethernet address [ 11.276879] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.276884] Creating 1 MTD partitions on "spi6.0": [ 11.276904] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.029624] using random self ethernet address [ 12.031268] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.840465] nvidia: loading out-of-tree module taints kernel. [ 59.680445] watchdog: watchdog0: watchdog did not stop! [ 60.163806] Trying to unregister non-registered hwtime source [ 63.224142] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.225707] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERRÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/Tÿâclk_early initialized ÿäC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.421] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.605] W> set volts not configured for 'vdd-1v8-hs' [0003.606] I> retrieved tmds range from prod_list_hdmi_soc [0003.610] E> invalid display type [0003.611] E> cannot find any other nvdisp nodes [0003.629] I> edid read success [0003.641] I> edid read success [0003.641] I> width = 640, height = 480, frequency = 25174825 [0003.642] I> width = 1920, height = 1080, frequency = 148500000 [0003.642] I> width = 1280, height = 768, frequency = 79500000 [0003.642] I> width = 1360, height = 768, frequency = 85500000 [0003.643] I> width = 720, height = 480, frequency = 26973026 [0003.647] I> width = 720, height = 576, frequency = 26973026 [0003.652] I> width = 1280, height = 720, frequency = 74175824 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1920, height = 1080, frequency = 148351648 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 720, height = 480, frequency = 26973026 [0003.681] I> width = 720, height = 576, frequency = 26973026 [0003.686] I> width = 3840, height = 2160, frequency = 296703296 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 4096, height = 2160, frequency = 296703296 [0003.715] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.726] I> hdmi_enable, starting HDMI initialisation [0003.731] I> hdmi_enable, HDMI initialisation complete [0003.740] initializing target [0003.741] calling apps_init() [0003.742] starting app kernel_boot_app [0003.742] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000671] Console: colour dummy device 80x25 [ 0.002066] printk: console [tty0] enabled [ 0.002130] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002166] pid_max: default: 32768 minimum: 301 [ 0.002327] LSM: Security Framework initializing [ 0.002384] Yama: becoming mindful. [ 0.002425] SELinux: Initializing. [ 0.002568] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002604] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005650] rcu: Hierarchical SRCU implementation. [ 0.005918] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006732] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006795] DTB Build time: Aug 10 2022 20:31:49 [ 0.009603] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009887] Remapping and enabling EFI services. [ 0.011870] smp: Bringing up secondary CPUs ... [ 0.041044] Detected PIPT I-cache on CPU1 [ 0.041142] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072819] Detected PIPT I-cache on CPU2 [ 0.072894] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102415] Detected PIPT I-cache on CPU3 [ 0.102552] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132242] Detected PIPT I-cache on CPU4 [ 0.132403] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162116] Detected PIPT I-cache on CPU5 [ 0.162273] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162706] smp: Brought up 1 node, 6 CPUs [ 0.162866] SMP: Total of 6 processors activated. [ 0.162936] CPU features: detected: Privileged Access Never [ 0.162961] CPU features: detected: LSE atomic instructions [ 0.162975] CPU features: detected: User Access Override [ 0.162988] CPU features: detected: 32-bit EL0 Support [ 0.163001] CPU features: detected: RAS Extension Support [ 0.163014] CPU features: detected: CRC32 instructions [ 0.163027] CPU features: detected: 32-bit EL1 Support [ 0.231316] CPU: All CPU(s) started at EL2 [ 0.236032] devtmpfs: initialized [ 0.287047] Registered cp15_barrier emulation handler [ 0.287171] Registered setend emulation handler [ 0.287190] KASLR enabled [ 0.287496] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287523] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288795] pinctrl core: initialized pinctrl subsystem [ 0.289806] SMBIOS 3.0.0 present. [ 0.289847] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.290528] NET: Registered protocol family 16 [ 0.292568] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293077] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294068] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294125] audit: initializing netlink subsys (disabled) [ 0.294469] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.294916] thermal_sys: Registered thermal governor 'step_wise' [ 0.294922] thermal_sys: Registered thermal governor 'power_allocator' [ 0.294936] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.297237] cpuidle: using governor menu [ 0.297577] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.298023] ASID allocator initialised with 32768 entries [ 0.298237] Serial: AMBA PL011 UART driver [ 0.301777] Tegra reboot handler registered. [ 0.375001] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375127] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.375308] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.375355] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.375479] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.375523] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.375638] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.375681] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.375805] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.375848] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.377965] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.378003] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.378032] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.378060] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.378109] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.378136] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.378173] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.378205] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.378231] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.378256] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.378280] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.378304] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.378329] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.378353] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.378377] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.378404] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.378428] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.378515] mc-err: mcerr ops are set to t19x [ 0.391652] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391695] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.391709] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391737] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399085] ACPI: Interpreter disabled. [ 0.400233] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.401486] iommu: Default domain type: Translated [ 0.401545] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.401898] SCSI subsystem initialized [ 0.402073] usbcore: registered new interface driver usbfs [ 0.402117] usbcore: registered new interface driver hub [ 0.402161] usbcore: registered new device driver usb [ 0.402568] mc: Linux media interface: v0.10 [ 0.402599] videodev: Linux video capture interface: v2.00 [ 0.403034] pps_core: LinuxPPS API ver. 1 registered [ 0.403072] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403098] PTP clock support registered [ 0.403321] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.403622] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.403713] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.404308] Registered efivars operations [ 0.410055] FPGA manager framework [ 0.410163] Advanced Linux Sound Architecture Driver Initialized. [ 0.410732] Bluetooth: Core ver 2.22 [ 0.410790] NET: Registered protocol family 31 [ 0.410802] Bluetooth: HCI device and connection manager initialized [ 0.410818] Bluetooth: HCI socket layer initialized [ 0.410834] Bluetooth: L2CAP socket layer initialized [ 0.410856] Bluetooth: SCO socket layer initialized [ 0.412275] camchar: rtcpu character device driver loaded [ 0.413044] clocksource: Switched to clocksource arch_sys_counter [ 0.754751] VFS: Disk quotas dquot_6.6.0 [ 0.754821] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.755119] pnp: PnP ACPI: disabled [ 0.766987] la/ptsa driver initialized. [ 0.767119] NET: Registered protocol family 2 [ 0.767293] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.771865] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.771933] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.772227] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.772661] TCP: Hash tables configured (established 65536 bind 65536) [ 0.772770] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.772888] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.773126] NET: Registered protocol family 1 [ 0.773779] RPC: Registered named UNIX socket transport module. [ 0.773794] RPC: Registered udp transport module. [ 0.773804] RPC: Registered tcp transport module. [ 0.773813] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.773830] PCI: CLS 0 bytes, default 64 [ 0.774040] Trying to unpack rootfs image as initramfs... [ 0.962141] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.964268] Freeing initrd memory: 8196K [ 0.968458] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.968498] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.968553] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.968968] kvm [1]: IPA Size Limit: 40 bits [ 0.969515] kvm [1]: vgic interrupt IRQ9 [ 0.970133] kvm [1]: VHE mode initialized successfully [ 0.971977] Initialise system trusted keyrings [ 0.972317] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.979721] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.980718] NFS: Registering the id_resolver key type [ 0.980755] Key type id_resolver registered [ 0.980770] Key type id_legacy registered [ 0.980869] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.980895] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.980933] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.991649] NET: Registered protocol family 38 [ 0.991672] Key type asymmetric registered [ 0.991687] Asymmetric key parser 'x509' registered [ 0.991746] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.991992] io scheduler mq-deadline registered [ 0.992011] io scheduler kyber registered [ 0.998930] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.002428] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.002518] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.002600] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.002689] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.002763] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.009477] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.009509] scrncapt: init (heads:4 wins:6 planes:4) [ 1.010784] EINJ: ACPI disabled. [ 1.014043] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.014074] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.014088] tegra-pmc: ### PMC reset level: L1 [ 1.014102] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.014150] tegra-pmc: PMC Prod config success [ 1.020009] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.025604] random: fast init done [ 1.025822] printk: console [ttyTCU0] enabled [ 2.577783] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.582256] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.586885] arm-smmu 10000000.iommu: stage 1 translation [ 2.592297] arm-smmu 10000000.iommu: stage 2 translation [ 2.597517] arm-smmu 10000000.iommu: nested translation [ 2.603106] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.610281] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.622475] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.623374] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.629708] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.637655] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.642745] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.647470] arm-smmu 12000000.iommu: stage 1 translation [ 2.653237] arm-smmu 12000000.iommu: stage 2 translation [ 2.658662] arm-smmu 12000000.iommu: nested translation [ 2.664091] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.671287] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.683398] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.684103] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.690713] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.698388] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.708341] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.711216] tegra_profiler: auth: init [ 2.715659] THERMAL EST: found 3 subdevs [ 2.718798] THERMAL EST num_resources: 0 [ 2.722632] [THERMAL EST subdev 0] [ 2.726212] [THERMAL EST subdev 1] [ 2.729368] [THERMAL EST subdev 2] [ 2.732843] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.739394] THERMAL EST: thz register success. [ 2.743575] THERMAL EST: end of probe, return err: 0 [ 2.748665] nvsciipc: loaded module [ 2.756479] tun: Universal TUN/TAP device driver, 1.6 [ 2.758381] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.764652] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.769977] e1000e: Intel(R) PRO/1000 Network Driver [ 2.775119] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.781205] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.786239] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.792375] PPP generic driver version 2.4.2 [ 2.796713] PPP BSD Compression module registered [ 2.801474] PPP Deflate Compression module registered [ 2.806716] PPP MPPE Compression module registered [ 2.811477] usbcore: registered new interface driver r8152 [ 2.816987] usbcore: registered new interface driver asix [ 2.822604] usbcore: registered new interface driver ax88179_178a [ 2.828697] usbcore: registered new interface driver cdc_ether [ 2.834657] usbcore: registered new interface driver net1080 [ 2.839990] usbcore: registered new interface driver cdc_subset [ 2.846051] usbcore: registered new interface driver zaurus [ 2.851994] usbcore: registered new interface driver cdc_ncm [ 2.857668] usbcore: registered new interface driver aqc111 [ 2.863060] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.869394] ohci-pci: OHCI PCI platform driver [ 2.873428] ohci-platform: OHCI generic platform driver [ 2.879313] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.886114] usbcore: registered new interface driver uas [ 2.889723] usbcore: registered new interface driver usb-storage [ 2.896135] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.902010] mousedev: PS/2 mouse device common for all mice [ 2.906871] usbcore: registered new interface driver xpad [ 2.915373] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.917646] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.925449] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.932288] i2c /dev entries driver [ 2.935320] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.941223] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.946581] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.951881] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.957859] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.963063] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.968405] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.983020] device-mapper: uevent: version 1.0.3 [ 2.983572] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.989004] cpuidle: Initializing cpuidle driver [ 2.992702] sdhci: Secure Digital Host Controller Interface driver [ 2.997227] sdhci: Copyright(c) Pierre Ossman [ 3.001575] Synopsys Designware Multimedia Card Interface Driver [ 3.007504] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.013551] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.014240] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.027053] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.050081] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.060064] vdd-1v0: supplied by regulator-dummy [ 3.065670] vdd-1v8-hs: supplied by regulator-dummy [ 3.070743] vdd-1v8-ls: supplied by regulator-dummy [ 3.075799] vdd-1v8-ao: supplied by regulator-dummy [ 3.079982] vddio-ddr-1v1: supplied by regulator-dummy [ 3.084524] vdd-rtc: supplied by regulator-dummy [ 3.086520] spmic-ldo1: supplied by regulator-dummy [ 3.087850] vdd-ao-3v3: supplied by regulator-dummy [ 3.094251] vddio-emmc-3v3: supplied by regulator-dummy [ 3.100671] spmic-ldo4: supplied by regulator-dummy [ 3.102070] vdd-usb-3v3: supplied by regulator-dummy [ 3.108448] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.114893] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.120636] spmic-ldo8: supplied by vdd-1v8-ls [ 3.122330] gpio-510 (gpio_default): hogged as output/high [ 3.123736] gpio-511 (gpio_default): hogged as output/high [ 3.127036] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.263167] max77686-rtc max77620-rtc: registered as rtc0 [ 3.264305] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.264653] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.135305] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.136546] hid: raw HID events driver (C) Jiri Kosina [ 4.137533] usbcore: registered new interface driver usbhid [ 4.137718] usbhid: USB HID core driver [ 4.140172] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.141576] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.059107] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.133028] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 74.731 ms) ÿá[ 4.226292] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.227038] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.228639] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.229869] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.232082] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.232861] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.233870] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.235355] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.235721] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.237948] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.242196] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.248062] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.254016] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.259819] denver_knobs_init:MTS_VERSION:55637613 [ 4.273746] t19x_cache tegra-cache: probed [ 4.278390] optee: probing for conduit method. [ 4.279381] optee: revision 3.16 (65cc2218) [ 4.280987] optee: dynamic shared memory is enabled [ 4.282594] optee: initialized driver [ 4.287463] nvpmodel: initialized successfully [ 4.288019] tegra_hv: get_hvd: not initialized yet [ 4.292714] user_ivc_mempool: hypervisor not present [ 4.298571] usbcore: registered new interface driver snd-usb-audio [ 4.305377] u32 classifier [ 4.306104] input device check on [ 4.309829] Actions configured [ 4.313901] Initializing XFRM netlink socket [ 4.318657] NET: Registered protocol family 10 [ 4.326256] Segment Routing with IPv6 [ 4.326538] NET: Registered protocol family 17 [ 4.330142] NET: Registered protocol family 15 [ 4.334563] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.348539] Bluetooth: RFCOMM socket layer initialized [ 4.352692] Bluetooth: RFCOMM ver 1.11 [ 4.356821] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.362416] Bluetooth: HIDP socket layer initialized [ 4.368739] 9pnet: Installing 9P2000 support [ 4.371872] Key type dns_resolver registered [ 4.377651] registered taskstats version 1 [ 4.380248] Loading compiled-in X.509 certificates [ 4.394824] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.396320] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.407116] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.408457] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.416880] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.425438] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.541244] tegra194-pcie 14160000.pcie: Link up [ 4.544324] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.544635] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.544841] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.545129] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.545334] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.545772] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.546229] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.560031] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.560528] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.560990] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.562691] pci 0004:01:00.0: supports D1 D2 [ 4.562925] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.575418] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.576030] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.576363] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.576884] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.577386] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.577672] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.577940] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.583288] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.592076] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.602630] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.606960] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.612753] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.620370] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.630107] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.630533] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.638629] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.646677] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.762562] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.763467] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.763682] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.763881] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.764256] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.764472] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.764900] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.765743] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.786276] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.786582] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.789033] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.790881] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.793405] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.795333] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.796595] pci 0005:00:00.0: Removing from iommu group 7 [ 5.796907] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.832735] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.858807] host1x 13e10000.host1x: initialized [ 5.860497] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.861762] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.863103] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.863895] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.865296] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.865991] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.867116] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.867902] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.868838] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.869590] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.872803] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.879540] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.889907] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.896483] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.906522] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.913879] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.923885] falcon 15340000.vic: Adding to iommu group 17 [ 5.940254] falcon 15340000.vic: initialized [ 5.941679] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.947421] falcon 15380000.nvjpg: initialized [ 5.948116] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.956086] falcon 154c0000.nvenc: initialized [ 5.956778] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.966601] falcon 15a80000.nvenc1: initialized [ 5.967366] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.980126] nvdec 15480000.nvdec: initialized [ 5.980694] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.990711] nvdec 15140000.nvdec1: initialized [ 5.991270] tsec 15500000.tsec: Adding to iommu group 18 [ 5.997191] tsec 15500000.tsec: initialized [ 5.997804] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.004752] tsec 15100000.tsecb: initialized [ 6.010226] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.036587] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.050407] gpio-374 (wifi-enable): hogged as output/high [ 6.050823] gpio-431 (camera-control-output-low): hogged as output/low [ 6.051097] gpio-432 (camera-control-output-low): hogged as output/low [ 6.052756] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.054652] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.055221] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.056714] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.060339] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.066184] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.071655] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.080289] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.087415] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.098898] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.103952] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.109920] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.118757] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.127776] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.135755] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.143500] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.149283] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.158992] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.165202] pva 16000000.pva0: Adding to iommu group 22 [ 6.194672] pva 16000000.pva0: initialized [ 6.201542] pva 16800000.pva1: Adding to iommu group 23 [ 6.213786] pva 16800000.pva1: initialized [ 6.219479] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.234770] nvdla 15880000.nvdla0: initialized [ 6.236489] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.247204] nvdla 158c0000.nvdla1: initialized [ 6.251670] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.251709] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.252067] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.252403] tegradc 15200000.display: Adding to iommu group 26 [ 6.252689] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.252870] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.253689] tegradccommon 15200000.display-hub: dma mapping done [ 6.254275] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.254535] tegra_cec 3960000.tegra_cec: probed [ 6.259917] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.260119] tegradc 15210000.display: Adding to iommu group 26 [ 6.260440] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.260618] generic_infoframe_type: 0x87 [ 6.260718] tegradc 15200000.display: DT parsed successfully [ 6.260819] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.265191] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.265272] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.265285] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.265288] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.266118] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.266129] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.267427] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.270368] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.279540] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.282265] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.287630] kfuse 3830000.kfuse: initialized [ 6.298221] tegradc 15210000.display: disp0 connected to head1->sor [ 6.301470] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.309152] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.317277] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.318630] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.325213] tegradc 15210000.display: DT parsed successfully [ 6.332982] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.337226] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.430454] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.435516] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.444402] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.449668] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.470120] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.470523] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.472340] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.481146] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.489554] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.495966] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.503471] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.510635] usb usb1: Product: xHCI Host Controller [ 6.515885] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.522178] usb usb1: SerialNumber: 3610000.xhci [ 6.527865] hub 1-0:1.0: USB hub found [ 6.530627] hub 1-0:1.0: 4 ports detected [ 6.535387] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.539902] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.547495] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.555415] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.563070] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.570573] usb usb2: Product: xHCI Host Controller [ 6.575295] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.581764] usb usb2: SerialNumber: 3610000.xhci [ 6.587011] hub 2-0:1.0: USB hub found [ 6.589999] hub 2-0:1.0: 4 ports detected [ 6.636177] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.643084] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.644621] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.644809] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.658413] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.659610] tegra194-cpufreq ccplex: probed with BWMGR [ 6.660873] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.661461] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.661973] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.663165] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.668624] tegra194-vi5 15c10000.vi: initialized [ 6.669848] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.670412] generic_infoframe_type: 0x87 [ 6.671369] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.674405] tegradc 15200000.display: DT parsed successfully [ 6.680899] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.686100] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.694303] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.694347] mmc0: CQHCI version 5.10 [ 6.703138] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.708745] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.712139] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.720610] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.720634] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.748729] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.756538] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.756796] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.762852] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.769215] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.775574] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.781769] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.783077] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.789144] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.798382] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.815070] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.822689] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.831901] tegradc 15200000.display: probed [ 6.836730] nvethernet 2490000.ethernet: Macsec not supported [ 6.847776] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.856620] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.860794] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.868323] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.876553] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.882692] tegra-se-nvhost 15810000.se: initialized [ 6.890863] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.892903] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.898840] Console: switching to colour frame buffer device 240x67 [ 6.904560] tegradc 15200000.display: fb registered [ 6.909646] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.915369] tegra-se-nvhost 15820000.se: initialized [ 6.916107] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.922051] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.926389] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.932951] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.945594] tegra-se-nvhost 15830000.se: initialized [ 6.950421] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.956314] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.962354] tegra-se-nvhost 15840000.se: initialized [ 6.963521] mmc0: Command Queue Engine enabled [ 6.968555] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.971128] mmc0: periodic cache flush enabled [ 6.971145] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.971765] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.978949] tegra_actmon d230000.actmon: in actmon_register()... [ 6.981775] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.993632] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.015486] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.016374] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.027920] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.028338] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.035779] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.036596] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.036600] Extcon AUX1(HDMI) enable [ 7.036756] tegradc 15210000.display: disp1 connected to head1->sor [ 7.036912] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.036984] tegradc 15210000.display: DT parsed successfully [ 7.037020] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.037202] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.037208] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.043928] tegradc 15210000.display: probed [ 7.044351] hvc_sysfs: hypervisor is not present [ 7.111919] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.120170] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.120192] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.127169] tegradc 15210000.display: fb registered [ 7.137111] usb 1-2: Manufacturer: Generic [ 7.143121] hub 1-2:1.0: USB hub found [ 7.146048] hub 1-2:1.0: 4 ports detected [ 7.161966] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.168119] ALSA device list: [ 7.168222] No soundcards found. [ 7.172875] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.173116] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.177732] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.179316] Freeing unused kernel memory: 3968K [ 7.188084] tegradc 15210000.display: blank - powerdown [ 7.193130] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.197280] Run /init as init process [ 7.198782] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.198788] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.198792] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.198796] usb 2-3: Manufacturer: Generic [ 7.201429] Extcon DP: HPD disabled [ 7.201435] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.201446] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.209599] hub 2-3:1.0: USB hub found [ 7.211436] hub 2-3:1.0: 4 ports detected [ 7.213158] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.260631] tegradc 15200000.display: blank - powerdown [ 7.297083] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.310770] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.310774] Extcon AUX1(HDMI) disable [ 7.321117] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.334053] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.334896] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.347944] tegradc 15200000.display: unblank [ 7.348980] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.349299] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.355110] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.356951] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.360950] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.360954] Extcon AUX1(HDMI) enable [ 7.361620] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.361624] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.373702] tegradc 15200000.display: sync windows ret = 246 [ 7.394587] random: crng init done [ 7.403594] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.405097] Extcon HDMI: HPD enabled [ 7.406501] tegradc 15200000.display: hdmi: plugged [ 7.453775] Root device found: mmcblk0p1 [ 7.457287] Found dev node: /dev/mmcblk0p1 [ 7.470331] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.471837] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.473423] usb 1-3: Product: Bluetooth Radio [ 7.474863] usb 1-3: Manufacturer: Realtek [ 7.476217] usb 1-3: SerialNumber: 00e04c000001 [ 7.498506] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.503873] Rootfs mounted over mmcblk0p1 [ 7.540297] Switching from initrd to actual rootfs [ 7.682425] systemd[1]: System time before build time, advancing clock. [ 7.751635] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.756603] systemd[1]: Detected architecture arm64. [ 7.796824] systemd[1]: Set hostname to . [ 7.963702] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.314930] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.316646] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.322437] systemd[1]: Created slice system-modprobe.slice. [ 8.327217] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.331406] systemd[1]: Created slice User and Session Slice. [ 8.334795] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.339074] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.342422] systemd[1]: Reached target User and Group Name Lookups. [ 8.345640] systemd[1]: Reached target Slices. [ 8.348739] systemd[1]: Reached target Swap. [ 8.352819] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.356541] systemd[1]: Listening on Syslog Socket. [ 8.360183] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.363635] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.367936] systemd[1]: Listening on Journal Audit Socket. [ 8.371688] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.377174] systemd[1]: Listening on Journal Socket. [ 8.382559] systemd[1]: Listening on udev Control Socket. [ 8.386242] systemd[1]: Listening on udev Kernel Socket. [ 8.394739] systemd[1]: Mounting Huge Pages File System... [ 8.403230] systemd[1]: Mounting POSIX Message Queue File System... [ 8.411243] systemd[1]: Mounting RPC Pipe File System... [ 8.419758] systemd[1]: Mounting Kernel Debug File System... [ 8.428582] systemd[1]: Mounting Kernel Trace File System... [ 8.439022] systemd[1]: Starting Journal Service... [ 8.448546] systemd[1]: Starting Set the console keyboard layout... [ 8.457315] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.460939] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.467629] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.476230] systemd[1]: Started Nameserver information manager. [ 8.481151] systemd[1]: Reached target Network (Pre). [ 8.488517] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.490489] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.497257] systemd[1]: Starting Load Kernel Modules... [ 8.505574] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.515049] systemd[1]: Starting udev Coldplug all Devices... [ 8.525268] systemd[1]: Mounted Huge Pages File System. [ 8.529125] systemd[1]: Mounted POSIX Message Queue File System. [ 8.532874] systemd[1]: Mounted RPC Pipe File System. [ 8.537430] systemd[1]: Mounted Kernel Debug File System. [ 8.538404] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.540602] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.541300] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.543791] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.543803] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.543806] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.544100] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.549242] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.551594] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.551608] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.559749] systemd[1]: Mounted Kernel Trace File System. [ 8.566723] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.571689] systemd[1]: nvfb-udev.service: Succeeded. [ 8.576005] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.586332] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.598123] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.599952] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.607655] systemd[1]: Starting Load/Save Random Seed... [ 8.615853] systemd[1]: Starting Create System Users... [ 8.646207] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.646207] [ 8.669945] systemd[1]: Finished Load/Save Random Seed. [ 8.679341] systemd[1]: Finished Load Kernel Modules. [ 8.684347] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.691075] systemd[1]: Mounting Kernel Configuration File System... [ 8.699795] systemd[1]: Started OP-TEE Client Supplicant. [ 8.709168] systemd[1]: Starting Apply Kernel Variables... [ 8.716046] systemd[1]: Mounted Kernel Configuration File System. [ 8.727761] systemd[1]: Finished Create System Users. [ 8.734647] systemd[1]: Finished Set the console keyboard layout. [ 10.089694] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.096416] imx219 9-0010: board setup failed [ 10.096580] imx219: probe of 9-0010 failed with error -121 [ 10.107627] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.113483] imx219 10-0010: board setup failed [ 10.113624] imx219: probe of 10-0010 failed with error -121 [ 10.221355] hot-surface-alert cooling state: 0 -> 1 [ 10.780874] using random self ethernet address [ 10.817760] using random host ethernet address [ 11.711666] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.711673] Creating 1 MTD partitions on "spi6.0": [ 11.711688] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.410751] using random self ethernet address [ 12.424678] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.829711] nvidia: loading out-of-tree module taints kernel. [ 59.679289] watchdog: watchdog0: watchdog did not stop! [ 60.181401] Trying to unregister non-registered hwtime source [ 63.240561] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.242688] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr bÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.583] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.585] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized cvc initialized ÿä:20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuration miÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäght be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.204] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.205] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.206] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.213] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.222] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.235] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.244] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.253] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.262] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.271] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.280] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.293] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.302] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.311] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.320] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.329] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.338] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.351] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.360] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.369] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.378] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.387] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.396] GIC-SPI Target CPU: 0 [0003.399] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.407] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.417] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.429] initializing platform [0003.432] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.441] I> Bl_dtb @0xadf00000 [0003.444] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.493] I> virtual i2c enabled [0003.493] I> registered 'maxim,max20024' pmic [0003.494] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.494] I> Boot-device: QSPI [0003.495] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.519] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.530] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.538] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.545] E> Failed to get board id info! [0003.551] I> sdmmc-3 params source = safe params [0003.558] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.564] E> Failed to publish 00000003 [0003.569] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.609] W> set volts not configured for 'vdd-1v0' [0003.614] W> set volts not configured for 'vdd-1v8-hs' [0003.615] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.650] I> edid read success [0003.651] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.652] I> width = 1280, height = 768, frequency = 79500000 [0003.652] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.736] I> hdmi_enable, starting HDMI initialisation [0003.741] I> hdmi_enable, HDMI initialisation complete [0003.750] initializing target [0003.750] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000864] Console: colour dummy device 80x25 [ 0.002477] printk: console [tty0] enabled [ 0.002547] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002584] pid_max: default: 32768 minimum: 301 [ 0.002822] LSM: Security Framework initializing [ 0.002882] Yama: becoming mindful. [ 0.002927] SELinux: Initializing. [ 0.003109] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003162] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006362] rcu: Hierarchical SRCU implementation. [ 0.006654] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.008009] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.008044] DTB Build time: Aug 10 2022 20:31:49 [ 0.012795] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.013280] Remapping and enabling EFI services. [ 0.015388] smp: Bringing up secondary CPUs ... [ 0.048647] Detected PIPT I-cache on CPU1 [ 0.048747] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.079094] Detected PIPT I-cache on CPU2 [ 0.079248] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.108877] Detected PIPT I-cache on CPU3 [ 0.109052] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.138844] Detected PIPT I-cache on CPU4 [ 0.139074] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.168852] Detected PIPT I-cache on CPU5 [ 0.168985] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.169439] smp: Brought up 1 node, 6 CPUs [ 0.169685] SMP: Total of 6 processors activated. [ 0.169730] CPU features: detected: Privileged Access Never [ 0.169753] CPU features: detected: LSE atomic instructions [ 0.169767] CPU features: detected: User Access Override [ 0.169781] CPU features: detected: 32-bit EL0 Support [ 0.169794] CPU features: detected: RAS Extension Support [ 0.169806] CPU features: detected: CRC32 instructions [ 0.169819] CPU features: detected: 32-bit EL1 Support [ 0.239662] CPU: All CPU(s) started at EL2 [ 0.245268] devtmpfs: initialized [ 0.299313] Registered cp15_barrier emulation handler [ 0.299452] Registered setend emulation handler [ 0.299473] KASLR enabled [ 0.299744] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.299774] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.301194] pinctrl core: initialized pinctrl subsystem [ 0.302350] SMBIOS 3.0.0 present. [ 0.302385] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.302998] NET: Registered protocol family 16 [ 0.305044] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.305548] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.306256] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.306339] audit: initializing netlink subsys (disabled) [ 0.306593] audit: type=2000 audit(0.304:1): state=initialized audit_enabled=0 res=1 [ 0.307023] thermal_sys: Registered thermal governor 'step_wise' [ 0.307030] thermal_sys: Registered thermal governor 'power_allocator' [ 0.307045] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.309260] cpuidle: using governor menu [ 0.309616] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.310031] ASID allocator initialised with 32768 entries [ 0.310264] Serial: AMBA PL011 UART driver [ 0.314481] Tegra reboot handler registered. [ 0.385263] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.385426] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.385605] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.385654] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.385809] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.385854] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.385985] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.386029] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.386154] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.386197] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.388581] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.388644] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.388677] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.388722] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.388754] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.388782] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.388839] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.388870] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.388895] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.388919] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.388943] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.388967] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.388992] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.389016] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.389053] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.389078] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.389102] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.389201] mc-err: mcerr ops are set to t19x [ 0.402413] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.402436] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.402449] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.402462] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.408855] ACPI: Interpreter disabled. [ 0.410068] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.411330] iommu: Default domain type: Translated [ 0.411387] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.411801] SCSI subsystem initialized [ 0.411975] usbcore: registered new interface driver usbfs [ 0.412019] usbcore: registered new interface driver hub [ 0.412054] usbcore: registered new device driver usb [ 0.412477] mc: Linux media interface: v0.10 [ 0.412506] videodev: Linux video capture interface: v2.00 [ 0.412800] pps_core: LinuxPPS API ver. 1 registered [ 0.412812] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.412835] PTP clock support registered [ 0.413080] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.413410] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.413503] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.414076] Registered efivars operations [ 0.419845] FPGA manager framework [ 0.419963] Advanced Linux Sound Architecture Driver Initialized. [ 0.420480] Bluetooth: Core ver 2.22 [ 0.420518] NET: Registered protocol family 31 [ 0.420529] Bluetooth: HCI device and connection manager initialized [ 0.420545] Bluetooth: HCI socket layer initialized [ 0.420560] Bluetooth: L2CAP socket layer initialized [ 0.420581] Bluetooth: SCO socket layer initialized [ 0.422145] camchar: rtcpu character device driver loaded [ 0.422888] clocksource: Switched to clocksource arch_sys_counter [ 0.821338] VFS: Disk quotas dquot_6.6.0 [ 0.821433] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.821933] pnp: PnP ACPI: disabled [ 0.834655] la/ptsa driver initialized. [ 0.834802] NET: Registered protocol family 2 [ 0.835068] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.842647] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.842776] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.843179] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.843743] TCP: Hash tables configured (established 65536 bind 65536) [ 0.843899] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.844066] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.844340] NET: Registered protocol family 1 [ 0.845033] RPC: Registered named UNIX socket transport module. [ 0.845086] RPC: Registered udp transport module. [ 0.845101] RPC: Registered tcp transport module. [ 0.845115] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.845161] PCI: CLS 0 bytes, default 64 [ 0.845431] Trying to unpack rootfs image as initramfs... [ 1.105110] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.108160] Freeing initrd memory: 8196K [ 1.112716] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.112767] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.112826] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.113176] kvm [1]: IPA Size Limit: 40 bits [ 1.113766] kvm [1]: vgic interrupt IRQ9 [ 1.114275] kvm [1]: VHE mode initialized successfully [ 1.116008] Initialise system trusted keyrings [ 1.116320] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.121942] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.122745] NFS: Registering the id_resolver key type [ 1.122785] Key type id_resolver registered [ 1.122804] Key type id_legacy registered [ 1.122963] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.123019] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.123065] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.132623] NET: Registered protocol family 38 [ 1.132648] Key type asymmetric registered [ 1.132664] Asymmetric key parser 'x509' registered [ 1.132748] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.132964] io scheduler mq-deadline registered [ 1.132983] io scheduler kyber registered [ 1.138689] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.141734] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.141824] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.141895] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.141964] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.142032] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.147466] scrncapt: init (heads:4 wins:6 planes:4) [ 1.148031] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.148955] EINJ: ACPI disabled. [ 1.152607] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.152636] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.152676] tegra-pmc: ### PMC reset level: L1 [ 1.152692] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.152746] tegra-pmc: PMC Prod config success [ 1.157834] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.163155] random: fast init done [ 1.163808] printk: console [ttyTCU0] enabled [ 2.715203] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.719966] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.724501] arm-smmu 10000000.iommu: stage 1 translation [ 2.729754] arm-smmu 10000000.iommu: stage 2 translation [ 2.735524] arm-smmu 10000000.iommu: nested translation [ 2.740879] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.747800] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.758824] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.761170] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.767734] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.775246] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.780763] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.785489] arm-smmu 12000000.iommu: stage 1 translation [ 2.790745] arm-smmu 12000000.iommu: stage 2 translation [ 2.796423] arm-smmu 12000000.iommu: nested translation [ 2.801879] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.809032] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.819637] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.822131] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.828463] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.836207] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.846084] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.848908] tegra_profiler: auth: init [ 2.853262] THERMAL EST: found 3 subdevs [ 2.856824] THERMAL EST num_resources: 0 [ 2.860405] [THERMAL EST subdev 0] [ 2.863978] [THERMAL EST subdev 1] [ 2.867127] [THERMAL EST subdev 2] [ 2.870356] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.876894] THERMAL EST: thz register success. [ 2.881079] THERMAL EST: end of probe, return err: 0 [ 2.886531] nvsciipc: loaded module [ 2.893573] tun: Universal TUN/TAP device driver, 1.6 [ 2.896003] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.902218] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.908194] e1000e: Intel(R) PRO/1000 Network Driver [ 2.912976] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.919012] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.924007] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.930790] PPP generic driver version 2.4.2 [ 2.934743] PPP BSD Compression module registered [ 2.939231] PPP Deflate Compression module registered [ 2.944482] PPP MPPE Compression module registered [ 2.949268] usbcore: registered new interface driver r8152 [ 2.954777] usbcore: registered new interface driver asix [ 2.960368] usbcore: registered new interface driver ax88179_178a [ 2.966206] usbcore: registered new interface driver cdc_ether [ 2.972169] usbcore: registered new interface driver net1080 [ 2.977785] usbcore: registered new interface driver cdc_subset [ 2.984077] usbcore: registered new interface driver zaurus [ 2.989773] usbcore: registered new interface driver cdc_ncm [ 2.995425] usbcore: registered new interface driver aqc111 [ 3.001094] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.006914] ohci-pci: OHCI PCI platform driver [ 3.011184] ohci-platform: OHCI generic platform driver [ 3.017063] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.023725] usbcore: registered new interface driver uas [ 3.027774] usbcore: registered new interface driver usb-storage [ 3.033827] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.039815] mousedev: PS/2 mouse device common for all mice [ 3.044942] usbcore: registered new interface driver xpad [ 3.052847] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.055638] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.063418] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.069919] i2c /dev entries driver [ 3.073307] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.078834] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.084148] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.089747] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.095123] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.100386] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.105820] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.117414] device-mapper: uevent: version 1.0.3 [ 3.117803] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.125891] cpuidle: Initializing cpuidle driver [ 3.129977] sdhci: Secure Digital Host Controller Interface driver [ 3.135239] sdhci: Copyright(c) Pierre Ossman [ 3.139079] Synopsys Designware Multimedia Card Interface Driver [ 3.145485] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.151407] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.157487] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.164556] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.182144] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.191111] vdd-1v0: supplied by regulator-dummy [ 3.196460] vdd-1v8-hs: supplied by regulator-dummy [ 3.201153] vdd-1v8-ls: supplied by regulator-dummy [ 3.205821] vdd-1v8-ao: supplied by regulator-dummy [ 3.209577] vddio-ddr-1v1: supplied by regulator-dummy [ 3.213871] vdd-rtc: supplied by regulator-dummy [ 3.215423] spmic-ldo1: supplied by regulator-dummy [ 3.216570] vdd-ao-3v3: supplied by regulator-dummy [ 3.222720] vddio-emmc-3v3: supplied by regulator-dummy [ 3.228909] spmic-ldo4: supplied by regulator-dummy [ 3.230073] vdd-usb-3v3: supplied by regulator-dummy [ 3.236044] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.242082] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.247407] spmic-ldo8: supplied by vdd-1v8-ls [ 3.248785] gpio-510 (gpio_default): hogged as output/high [ 3.251211] gpio-511 (gpio_default): hogged as output/high [ 3.258519] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.396969] max77686-rtc max77620-rtc: registered as rtc0 [ 3.398165] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.398460] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.096883] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.097918] hid: raw HID events driver (C) Jiri Kosina [ 4.098573] usbcore: registered new interface driver usbhid [ 4.098715] usbhid: USB HID core driver [ 4.100415] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.101532] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.184134] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.259737] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.413 ms) ÿá[ 4.186516] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.187075] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.188019] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.188710] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.190197] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.190771] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.191469] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.192748] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.193056] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.195120] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.202982] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.209305] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.214261] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.221043] denver_knobs_init:MTS_VERSION:55637613 [ 4.233624] t19x_cache tegra-cache: probed [ 4.236518] optee: probing for conduit method. [ 4.237440] optee: revision 3.16 (65cc2218) [ 4.238646] optee: dynamic shared memory is enabled [ 4.241878] optee: initialized driver [ 4.248178] nvpmodel: initialized successfully [ 4.249276] tegra_hv: get_hvd: not initialized yet [ 4.254008] user_ivc_mempool: hypervisor not present [ 4.260324] usbcore: registered new interface driver snd-usb-audio [ 4.266708] u32 classifier [ 4.268086] input device check on [ 4.271414] Actions configured [ 4.275361] Initializing XFRM netlink socket [ 4.280041] NET: Registered protocol family 10 [ 4.286783] Segment Routing with IPv6 [ 4.287786] NET: Registered protocol family 17 [ 4.291828] NET: Registered protocol family 15 [ 4.295996] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.309576] Bluetooth: RFCOMM socket layer initialized [ 4.314291] Bluetooth: RFCOMM ver 1.11 [ 4.318389] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.324264] Bluetooth: HIDP socket layer initialized [ 4.329715] 9pnet: Installing 9P2000 support [ 4.333692] Key type dns_resolver registered [ 4.339168] registered taskstats version 1 [ 4.341823] Loading compiled-in X.509 certificates [ 4.354281] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.357654] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.367845] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.370015] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.378389] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.386795] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.503081] tegra194-pcie 14160000.pcie: Link up [ 4.506189] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.506388] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.506548] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.506841] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.507108] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.507516] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.507957] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.520454] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.520931] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.521425] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.523171] pci 0004:01:00.0: supports D1 D2 [ 4.523401] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.536225] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.536596] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.536861] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.537234] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.537550] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.537754] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.537966] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.545443] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.553813] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.564067] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.568686] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.573818] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.580929] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.589825] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.591550] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.599948] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.608698] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.724215] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.724927] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.725196] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.725344] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.725562] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.725810] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.726217] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.726704] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.749250] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.749588] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.752009] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.753298] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.754817] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.756421] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.757447] pci 0005:00:00.0: Removing from iommu group 7 [ 5.757695] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.793143] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.818459] host1x 13e10000.host1x: initialized [ 5.820209] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.821097] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.822439] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.823406] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.824745] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.825384] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.826616] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.827403] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.828489] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.829092] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.834572] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.841377] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.851123] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.858352] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.868192] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.875426] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.885090] falcon 15340000.vic: Adding to iommu group 17 [ 5.900390] falcon 15340000.vic: initialized [ 5.901426] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.907589] falcon 15380000.nvjpg: initialized [ 5.908354] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.918430] falcon 154c0000.nvenc: initialized [ 5.919086] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.928651] falcon 15a80000.nvenc1: initialized [ 5.929419] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.941165] nvdec 15480000.nvdec: initialized [ 5.941882] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.951661] nvdec 15140000.nvdec1: initialized [ 5.952190] tsec 15500000.tsec: Adding to iommu group 18 [ 5.957857] tsec 15500000.tsec: initialized [ 5.958323] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.966054] tsec 15100000.tsecb: initialized [ 5.969956] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.999290] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.012263] gpio-374 (wifi-enable): hogged as output/high [ 6.012554] gpio-431 (camera-control-output-low): hogged as output/low [ 6.012882] gpio-432 (camera-control-output-low): hogged as output/low [ 6.015185] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.018048] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.018750] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.020499] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.021604] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.027891] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.033303] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.041823] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.049024] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.060929] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.065485] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.071515] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.080106] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.089647] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.096706] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.104303] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.110399] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.120289] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.126259] pva 16000000.pva0: Adding to iommu group 22 [ 6.154115] pva 16000000.pva0: initialized [ 6.159663] pva 16800000.pva1: Adding to iommu group 23 [ 6.172315] pva 16800000.pva1: initialized [ 6.177473] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.191687] nvdla 15880000.nvdla0: initialized [ 6.193096] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.201552] nvdla 158c0000.nvdla1: initialized [ 6.205429] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.205723] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.206102] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.206116] tegradccommon 15200000.display-hub: dma mapping done [ 6.206266] tegradc 15210000.display: Adding to iommu group 26 [ 6.206584] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.208528] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.210640] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.214234] tegradc 15200000.display: Adding to iommu group 26 [ 6.214618] tegradc 15210000.display: disp0 connected to head1->sor [ 6.214735] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.214874] tegradc 15210000.display: DT parsed successfully [ 6.215044] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.216475] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.223373] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.227841] tegra_cec 3960000.tegra_cec: probed [ 6.228787] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.235408] generic_infoframe_type: 0x87 [ 6.243480] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.249085] tegradc 15200000.display: DT parsed successfully [ 6.255094] kfuse 3830000.kfuse: initialized [ 6.261246] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.266313] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.275605] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.281946] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.282584] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.287768] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.306810] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.314972] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.322886] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.328418] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.352634] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.358613] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.365621] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.374701] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.396121] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.399683] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.414183] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.425615] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.428954] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.434247] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.442989] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.451018] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.457899] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.465217] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.472412] usb usb1: Product: xHCI Host Controller [ 6.477587] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.483847] usb usb1: SerialNumber: 3610000.xhci [ 6.489700] hub 1-0:1.0: USB hub found [ 6.492449] hub 1-0:1.0: 4 ports detected [ 6.496862] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.501516] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.509123] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.517122] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.524754] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.532016] usb usb2: Product: xHCI Host Controller [ 6.537174] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.543434] usb usb2: SerialNumber: 3610000.xhci [ 6.549347] hub 2-0:1.0: USB hub found [ 6.551935] hub 2-0:1.0: 4 ports detected [ 6.593524] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.599401] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.601021] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.601197] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.614633] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.615725] tegra194-cpufreq ccplex: probed with BWMGR [ 6.617044] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.617613] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.618067] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.619343] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.627691] tegra194-vi5 15c10000.vi: initialized [ 6.628768] mmc0: CQHCI version 5.10 [ 6.629079] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.630145] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.635469] generic_infoframe_type: 0x87 [ 6.642262] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.645609] tegradc 15200000.display: DT parsed successfully [ 6.653989] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.659208] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.659252] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.666056] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.674474] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.681709] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.688569] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.696844] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.703070] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.718987] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.726315] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.732018] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.732044] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.738597] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.742962] mmc0: Command Queue Engine enabled [ 6.742966] mmc0: periodic cache flush enabled [ 6.742978] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.743478] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.743590] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.746752] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.747301] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.752477] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.762943] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.763687] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.763691] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.765652] tegradc 15200000.display: probed [ 6.767321] nvethernet 2490000.ethernet: Macsec not supported [ 6.768709] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.849622] random: crng init done [ 6.853401] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.861126] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.861253] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.861344] Console: switching to colour frame buffer device 240x67 [ 6.862334] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.868348] tegradc 15200000.display: fb registered [ 6.876574] tegra-se-nvhost 15810000.se: initialized [ 6.881441] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.892436] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.898571] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.903531] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.909647] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.916203] tegra-se-nvhost 15820000.se: initialized [ 6.934435] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.939101] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.942689] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.945716] tegra-se-nvhost 15830000.se: initialized [ 6.953405] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.959336] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.965468] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.965473] usb 1-2: Manufacturer: Generic [ 6.967557] hub 1-2:1.0: USB hub found [ 6.972059] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.977526] hub 1-2:1.0: 4 ports detected [ 6.981245] tegra-se-nvhost 15840000.se: initialized [ 6.988104] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.992149] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.995655] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.001258] tegra_actmon d230000.actmon: in actmon_register()... [ 7.008514] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.009203] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.014553] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.022077] Extcon AUX1(HDMI) enable [ 7.022201] tegradc 15210000.display: disp1 connected to head1->sor [ 7.036400] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.043402] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.049085] hvc_sysfs: hypervisor is not present [ 7.051910] tegradc 15210000.display: DT parsed successfully [ 7.066231] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.073731] tegradc 15210000.display: Display dc.00000000957ff565 registered with id=1 [ 7.115707] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.115932] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.116110] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.119386] usb 2-3: Manufacturer: Generic [ 7.125840] ALSA device list: [ 7.126137] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.127000] No soundcards found. [ 7.132962] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.134655] hub 2-3:1.0: USB hub found [ 7.136380] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.157545] tegradc 15200000.display: blank - powerdown [ 7.157651] tegradc 15210000.display: probed [ 7.205158] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.205162] Extcon AUX1(HDMI) disable [ 7.228518] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.229365] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.234945] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.234951] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.234958] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.240380] tegradc 15200000.display: unblank [ 7.241430] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.241645] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.247872] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.249745] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.253723] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.253727] Extcon AUX1(HDMI) enable [ 7.266491] tegradc 15200000.display: sync windows ret = 247 [ 7.296863] tegradc 15210000.display: fb registered [ 7.298290] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.299727] Extcon HDMI: HPD enabled [ 7.300343] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.301060] tegradc 15200000.display: hdmi: plugged [ 7.302401] Freeing unused kernel memory: 3968K [ 7.302621] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.302636] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.323593] tegradc 15210000.display: blank - powerdown [ 7.328932] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.331058] Run /init as init process [ 7.336973] Extcon DP: HPD disabled [ 7.336978] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.336988] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.344407] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.384181] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.385709] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.387241] usb 1-3: Product: Bluetooth Radio [ 7.388624] usb 1-3: Manufacturer: Realtek [ 7.389986] usb 1-3: SerialNumber: 00e04c000001 [ 7.420284] Root device found: mmcblk0p1 [ 7.423691] Found dev node: /dev/mmcblk0p1 [ 7.459338] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.465008] Rootfs mounted over mmcblk0p1 [ 7.503086] Switching from initrd to actual rootfs [ 7.647047] systemd[1]: System time before build time, advancing clock. [ 7.717306] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.722199] systemd[1]: Detected architecture arm64. [ 7.761407] systemd[1]: Set hostname to . [ 7.930268] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.272718] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.274399] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.279843] systemd[1]: Created slice system-modprobe.slice. [ 8.284438] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.288585] systemd[1]: Created slice User and Session Slice. [ 8.292099] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.296076] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.299346] systemd[1]: Reached target User and Group Name Lookups. [ 8.302391] systemd[1]: Reached target Slices. [ 8.305415] systemd[1]: Reached target Swap. [ 8.309339] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.312961] systemd[1]: Listening on Syslog Socket. [ 8.316513] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.320131] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.326486] systemd[1]: Listening on Journal Audit Socket. [ 8.332622] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.339012] systemd[1]: Listening on Journal Socket. [ 8.343519] systemd[1]: Listening on udev Control Socket. [ 8.346955] systemd[1]: Listening on udev Kernel Socket. [ 8.355516] systemd[1]: Mounting Huge Pages File System... [ 8.364247] systemd[1]: Mounting POSIX Message Queue File System... [ 8.372521] systemd[1]: Mounting RPC Pipe File System... [ 8.382675] systemd[1]: Mounting Kernel Debug File System... [ 8.391365] systemd[1]: Mounting Kernel Trace File System... [ 8.401699] systemd[1]: Starting Journal Service... [ 8.410691] systemd[1]: Starting Set the console keyboard layout... [ 8.419011] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.422500] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.429070] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.437069] systemd[1]: Started Nameserver information manager. [ 8.443703] systemd[1]: Reached target Network (Pre). [ 8.450206] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.452158] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.459530] systemd[1]: Starting Load Kernel Modules... [ 8.467404] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.475847] systemd[1]: Starting udev Coldplug all Devices... [ 8.486288] systemd[1]: Mounted Huge Pages File System. [ 8.490808] systemd[1]: Mounted POSIX Message Queue File System. [ 8.494522] systemd[1]: Mounted RPC Pipe File System. [ 8.495832] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.500892] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.502355] systemd[1]: Mounted Kernel Debug File System. [ 8.503160] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.505222] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.505246] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.508314] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.508484] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.508725] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.508895] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.508902] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.517954] systemd[1]: Mounted Kernel Trace File System. [ 8.524060] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.529669] systemd[1]: nvfb-udev.service: Succeeded. [ 8.533739] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.543779] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.548544] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.550524] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.565094] systemd[1]: Starting Load/Save Random Seed... [ 8.573684] systemd[1]: Starting Create System Users... [ 8.610209] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.610209] [ 8.624118] systemd[1]: Finished Load/Save Random Seed. [ 8.642531] systemd[1]: Finished Create System Users. [ 8.649092] systemd[1]: Finished Load Kernel Modules. [ 8.653643] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.660593] systemd[1]: Mounting Kernel Configuration File System... [ 8.668250] systemd[1]: Started OP-TEE Client Supplicant. [ 8.677120] systemd[1]: Starting Apply Kernel Variables... [ 8.685471] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.695414] systemd[1]: Finished Set the console keyboard layout. [ 8.702550] systemd[1]: Mounted Kernel Configuration File System. [ 10.228924] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.241612] imx219 9-0010: board setup failed [ 10.241715] imx219: probe of 9-0010 failed with error -121 [ 10.252763] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.271005] imx219 10-0010: board setup failed [ 10.272395] imx219: probe of 10-0010 failed with error -121 [ 10.306744] hot-surface-alert cooling state: 0 -> 1 [ 11.455899] using random self ethernet address [ 11.457029] using random host ethernet address [ 11.583798] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.584989] Creating 1 MTD partitions on "spi6.0": [ 11.586072] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.665879] using random self ethernet address [ 12.667105] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.789977] nvidia: loading out-of-tree module taints kernel. [ 59.708987] watchdog: watchdog0: watchdog did not stop! [ 60.184269] Trying to unregister non-registered hwtime source [ 63.242529] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.244082] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ÿÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.647] I> width = 720, height = 480, frequency = 26973026 [0003.651] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.745] initializing target [0003.746] calling apps_init() [0003.746] starting app kernel_boot_app [0003.747] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932988K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475328K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000727] Console: colour dummy device 80x25 [ 0.002236] printk: console [tty0] enabled [ 0.002295] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002332] pid_max: default: 32768 minimum: 301 [ 0.002585] LSM: Security Framework initializing [ 0.002687] Yama: becoming mindful. [ 0.002749] SELinux: Initializing. [ 0.002912] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002980] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006090] rcu: Hierarchical SRCU implementation. [ 0.006378] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007055] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007117] DTB Build time: Aug 10 2022 20:31:49 [ 0.009692] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010069] Remapping and enabling EFI services. [ 0.013430] smp: Bringing up secondary CPUs ... [ 0.042845] Detected PIPT I-cache on CPU1 [ 0.042958] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075238] Detected PIPT I-cache on CPU2 [ 0.075395] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105123] Detected PIPT I-cache on CPU3 [ 0.105217] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135003] Detected PIPT I-cache on CPU4 [ 0.135160] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164918] Detected PIPT I-cache on CPU5 [ 0.165067] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165423] smp: Brought up 1 node, 6 CPUs [ 0.165644] SMP: Total of 6 processors activated. [ 0.165697] CPU features: detected: Privileged Access Never [ 0.165722] CPU features: detected: LSE atomic instructions [ 0.165735] CPU features: detected: User Access Override [ 0.165749] CPU features: detected: 32-bit EL0 Support [ 0.165761] CPU features: detected: RAS Extension Support [ 0.165774] CPU features: detected: CRC32 instructions [ 0.165787] CPU features: detected: 32-bit EL1 Support [ 0.241643] CPU: All CPU(s) started at EL2 [ 0.248471] devtmpfs: initialized [ 0.295200] Registered cp15_barrier emulation handler [ 0.295342] Registered setend emulation handler [ 0.295366] KASLR enabled [ 0.295613] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.295637] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.296973] pinctrl core: initialized pinctrl subsystem [ 0.297989] SMBIOS 3.0.0 present. [ 0.298018] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.298567] NET: Registered protocol family 16 [ 0.300464] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.300957] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.301678] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.301733] audit: initializing netlink subsys (disabled) [ 0.301952] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.302416] thermal_sys: Registered thermal governor 'step_wise' [ 0.302422] thermal_sys: Registered thermal governor 'power_allocator' [ 0.302437] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.304647] cpuidle: using governor menu [ 0.305047] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.305447] ASID allocator initialised with 32768 entries [ 0.305670] Serial: AMBA PL011 UART driver [ 0.308749] Tegra reboot handler registered. [ 0.380981] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.381132] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.381301] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.381347] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.381460] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.381502] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.381613] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.381665] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.381807] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.381848] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.384084] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.384119] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.384146] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.384171] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.384198] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.384223] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.384247] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.384272] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.384296] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.384320] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.384345] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.384369] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.384393] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.384417] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.384443] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.384467] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.384497] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.384584] mc-err: mcerr ops are set to t19x [ 0.397412] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.397440] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.397456] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.397471] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.404641] ACPI: Interpreter disabled. [ 0.406004] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.407324] iommu: Default domain type: Translated [ 0.407402] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.407805] SCSI subsystem initialized [ 0.407974] usbcore: registered new interface driver usbfs [ 0.408039] usbcore: registered new interface driver hub [ 0.408087] usbcore: registered new device driver usb [ 0.408498] mc: Linux media interface: v0.10 [ 0.408531] videodev: Linux video capture interface: v2.00 [ 0.408829] pps_core: LinuxPPS API ver. 1 registered [ 0.408842] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.408865] PTP clock support registered [ 0.409059] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.409430] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.409488] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.410275] Registered efivars operations [ 0.415371] FPGA manager framework [ 0.415500] Advanced Linux Sound Architecture Driver Initialized. [ 0.416119] Bluetooth: Core ver 2.22 [ 0.416158] NET: Registered protocol family 31 [ 0.416171] Bluetooth: HCI device and connection manager initialized [ 0.416189] Bluetooth: HCI socket layer initialized [ 0.416206] Bluetooth: L2CAP socket layer initialized [ 0.416229] Bluetooth: SCO socket layer initialized [ 0.418218] camchar: rtcpu character device driver loaded [ 0.418926] clocksource: Switched to clocksource arch_sys_counter [ 0.711376] VFS: Disk quotas dquot_6.6.0 [ 0.711450] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.711806] pnp: PnP ACPI: disabled [ 0.724684] la/ptsa driver initialized. [ 0.724808] NET: Registered protocol family 2 [ 0.724981] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.729798] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.729882] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.730208] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.730642] TCP: Hash tables configured (established 65536 bind 65536) [ 0.730791] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.730892] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.731125] NET: Registered protocol family 1 [ 0.731820] RPC: Registered named UNIX socket transport module. [ 0.731838] RPC: Registered udp transport module. [ 0.731848] RPC: Registered tcp transport module. [ 0.731858] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.731884] PCI: CLS 0 bytes, default 64 [ 0.732075] Trying to unpack rootfs image as initramfs... [ 0.919510] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.921691] Freeing initrd memory: 8196K [ 0.925932] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.925979] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.926021] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.926416] kvm [1]: IPA Size Limit: 40 bits [ 0.927115] kvm [1]: vgic interrupt IRQ9 [ 0.927676] kvm [1]: VHE mode initialized successfully [ 0.929163] Initialise system trusted keyrings [ 0.929431] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.934084] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.934780] NFS: Registering the id_resolver key type [ 0.934808] Key type id_resolver registered [ 0.934818] Key type id_legacy registered [ 0.934890] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.934908] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.934976] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.943767] NET: Registered protocol family 38 [ 0.943787] Key type asymmetric registered [ 0.943800] Asymmetric key parser 'x509' registered [ 0.943856] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.944062] io scheduler mq-deadline registered [ 0.944078] io scheduler kyber registered [ 0.948728] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.951021] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.951088] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.951164] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.951242] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.951297] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.955599] scrncapt: init (heads:4 wins:6 planes:4) [ 0.956146] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.956946] EINJ: ACPI disabled. [ 0.960961] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.960982] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.960993] tegra-pmc: ### PMC reset level: L1 [ 0.961003] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.961040] tegra-pmc: PMC Prod config success [ 0.965523] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.969989] random: fast init done [ 0.970943] printk: console [ttyTCU0] enabled [ 2.522717] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.526884] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.531485] arm-smmu 10000000.iommu: stage 1 translation [ 2.537186] arm-smmu 10000000.iommu: stage 2 translation [ 2.542692] arm-smmu 10000000.iommu: nested translation [ 2.547795] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.554948] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.566730] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.568323] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.574880] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.582473] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.587921] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.592656] arm-smmu 12000000.iommu: stage 1 translation [ 2.597924] arm-smmu 12000000.iommu: stage 2 translation [ 2.603352] arm-smmu 12000000.iommu: nested translation [ 2.609010] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.616186] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.627854] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.629028] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.635638] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.643385] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.652820] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.656321] tegra_profiler: auth: init [ 2.660578] THERMAL EST: found 3 subdevs [ 2.663706] THERMAL EST num_resources: 0 [ 2.667834] [THERMAL EST subdev 0] [ 2.670851] [THERMAL EST subdev 1] [ 2.674543] [THERMAL EST subdev 2] [ 2.677527] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.683968] THERMAL EST: thz register success. [ 2.688230] THERMAL EST: end of probe, return err: 0 [ 2.693746] nvsciipc: loaded module [ 2.701081] tun: Universal TUN/TAP device driver, 1.6 [ 2.703401] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.709549] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.714864] e1000e: Intel(R) PRO/1000 Network Driver [ 2.720059] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.726125] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.731419] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.737655] PPP generic driver version 2.4.2 [ 2.741889] PPP BSD Compression module registered [ 2.746140] PPP Deflate Compression module registered [ 2.751395] PPP MPPE Compression module registered [ 2.756396] usbcore: registered new interface driver r8152 [ 2.761905] usbcore: registered new interface driver asix [ 2.767501] usbcore: registered new interface driver ax88179_178a [ 2.773619] usbcore: registered new interface driver cdc_ether [ 2.779323] usbcore: registered new interface driver net1080 [ 2.784978] usbcore: registered new interface driver cdc_subset [ 2.790993] usbcore: registered new interface driver zaurus [ 2.796916] usbcore: registered new interface driver cdc_ncm [ 2.802583] usbcore: registered new interface driver aqc111 [ 2.808223] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.814048] ohci-pci: OHCI PCI platform driver [ 2.818600] ohci-platform: OHCI generic platform driver [ 2.824532] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.830584] usbcore: registered new interface driver uas [ 2.834648] usbcore: registered new interface driver usb-storage [ 2.841073] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.847231] mousedev: PS/2 mouse device common for all mice [ 2.851801] usbcore: registered new interface driver xpad [ 2.859982] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.862763] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.870336] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.877143] i2c /dev entries driver [ 2.880491] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.886224] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.891742] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.897034] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.902567] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.907869] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.913257] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.927494] device-mapper: uevent: version 1.0.3 [ 2.927975] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.933784] cpuidle: Initializing cpuidle driver [ 2.937632] sdhci: Secure Digital Host Controller Interface driver [ 2.942390] sdhci: Copyright(c) Pierre Ossman [ 2.946246] Synopsys Designware Multimedia Card Interface Driver [ 2.952460] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.958637] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.959382] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.971664] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.989537] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.998545] vdd-1v0: supplied by regulator-dummy [ 3.003993] vdd-1v8-hs: supplied by regulator-dummy [ 3.008664] vdd-1v8-ls: supplied by regulator-dummy [ 3.013342] vdd-1v8-ao: supplied by regulator-dummy [ 3.017159] vddio-ddr-1v1: supplied by regulator-dummy [ 3.021532] vdd-rtc: supplied by regulator-dummy [ 3.023139] spmic-ldo1: supplied by regulator-dummy [ 3.024318] vdd-ao-3v3: supplied by regulator-dummy [ 3.030405] vddio-emmc-3v3: supplied by regulator-dummy [ 3.036535] spmic-ldo4: supplied by regulator-dummy [ 3.037774] vdd-usb-3v3: supplied by regulator-dummy [ 3.043915] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.049983] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.055462] spmic-ldo8: supplied by vdd-1v8-ls [ 3.056787] gpio-510 (gpio_default): hogged as output/high [ 3.058357] gpio-511 (gpio_default): hogged as output/high [ 3.065520] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.204035] max77686-rtc max77620-rtc: registered as rtc0 [ 3.204992] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.205290] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.935513] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.936825] hid: raw HID events driver (C) Jiri Kosina [ 3.937701] usbcore: registered new interface driver usbhid [ 3.937850] usbhid: USB HID core driver [ 3.939993] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.941399] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.699869] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.773940] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 74.879 ms) ÿá[ 4.025404] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.026070] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.027222] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.028001] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.029487] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.030199] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.030816] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.032248] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.032473] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.034835] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.041450] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.048520] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.053004] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.059680] denver_knobs_init:MTS_VERSION:55637613 [ 4.071411] t19x_cache tegra-cache: probed [ 4.074579] optee: probing for conduit method. [ 4.075521] optee: revision 3.16 (65cc2218) [ 4.076765] optee: dynamic shared memory is enabled [ 4.080650] optee: initialized driver [ 4.087690] nvpmodel: initialized successfully [ 4.088303] tegra_hv: get_hvd: not initialized yet [ 4.092634] user_ivc_mempool: hypervisor not present [ 4.099034] usbcore: registered new interface driver snd-usb-audio [ 4.105101] u32 classifier [ 4.106313] input device check on [ 4.110122] Actions configured [ 4.114005] Initializing XFRM netlink socket [ 4.118829] NET: Registered protocol family 10 [ 4.125248] Segment Routing with IPv6 [ 4.125916] NET: Registered protocol family 17 [ 4.130461] NET: Registered protocol family 15 [ 4.134667] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.148380] Bluetooth: RFCOMM socket layer initialized [ 4.153175] Bluetooth: RFCOMM ver 1.11 [ 4.156800] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.162873] Bluetooth: HIDP socket layer initialized [ 4.168558] 9pnet: Installing 9P2000 support [ 4.172052] Key type dns_resolver registered [ 4.177837] registered taskstats version 1 [ 4.180487] Loading compiled-in X.509 certificates [ 4.194313] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.196185] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.206150] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.208534] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.217255] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.225363] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.343028] tegra194-pcie 14160000.pcie: Link up [ 4.346041] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.346297] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.346433] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.346723] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.346905] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.347369] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.347815] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.360436] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.360942] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.361403] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.363097] pci 0004:01:00.0: supports D1 D2 [ 4.363269] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.374390] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.374761] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.375120] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.375637] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.375972] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.376187] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.377795] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.385246] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.393490] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.404101] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.408596] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.414077] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.421138] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.431233] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.431727] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.440139] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.448423] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.563860] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.564596] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.564909] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.565105] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.565545] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.565839] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.566334] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.566849] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.589662] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.590074] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.592530] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.593812] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.595753] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.597483] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.598482] pci 0005:00:00.0: Removing from iommu group 7 [ 5.599204] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.633363] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.654882] host1x 13e10000.host1x: initialized [ 5.656730] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.657549] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.658667] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.659574] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.660657] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.661319] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.662255] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.662892] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.663871] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.664482] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.674064] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.680987] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.691053] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.697960] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.707832] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.715032] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.724911] falcon 15340000.vic: Adding to iommu group 17 [ 5.738867] falcon 15340000.vic: initialized [ 5.739949] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.746259] falcon 15380000.nvjpg: initialized [ 5.746838] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.757176] falcon 154c0000.nvenc: initialized [ 5.757746] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.767260] falcon 15a80000.nvenc1: initialized [ 5.767837] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.779297] nvdec 15480000.nvdec: initialized [ 5.779844] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.789816] nvdec 15140000.nvdec1: initialized [ 5.790435] tsec 15500000.tsec: Adding to iommu group 18 [ 5.796069] tsec 15500000.tsec: initialized [ 5.796646] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.804925] tsec 15100000.tsecb: initialized [ 5.808525] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.834554] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.845986] gpio-374 (wifi-enable): hogged as output/high [ 5.846297] gpio-431 (camera-control-output-low): hogged as output/low [ 5.846587] gpio-432 (camera-control-output-low): hogged as output/low [ 5.848286] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.849930] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.850554] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.855966] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.861284] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.867557] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.872639] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.880830] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.888635] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.900159] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.905455] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.911048] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.919778] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.929398] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.936489] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.943802] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.950373] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.960163] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.966251] pva 16000000.pva0: Adding to iommu group 22 [ 5.992120] pva 16000000.pva0: initialized [ 5.997532] pva 16800000.pva1: Adding to iommu group 23 [ 6.016000] pva 16800000.pva1: initialized [ 6.021259] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.033938] nvdla 15880000.nvdla0: initialized [ 6.035962] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.044893] nvdla 158c0000.nvdla1: initialized [ 6.048281] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.048561] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.048966] tegradccommon 15200000.display-hub: dma mapping done [ 6.051095] tegradc 15200000.display: Adding to iommu group 26 [ 6.060219] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.060740] generic_infoframe_type: 0x87 [ 6.060997] tegradc 15200000.display: DT parsed successfully [ 6.061324] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.064090] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.064508] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.065546] tegradc 15210000.display: Adding to iommu group 26 [ 6.068189] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.080636] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.080712] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.088111] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.093870] tegra_cec 3960000.tegra_cec: probed [ 6.102028] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.114899] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.115588] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.120506] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.132686] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.135536] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.150807] kfuse 3830000.kfuse: initialized [ 6.155948] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.155987] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.168467] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.168930] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.175496] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.183753] tegradc 15210000.display: disp0 connected to head1->sor [ 6.187782] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.193737] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.200120] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.207286] tegradc 15210000.display: DT parsed successfully [ 6.217619] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.221203] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.235697] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.245147] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.250412] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.270756] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.271192] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.273901] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.282404] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.290856] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.297150] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.304818] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.312214] usb usb1: Product: xHCI Host Controller [ 6.316923] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.323217] usb usb1: SerialNumber: 3610000.xhci [ 6.328786] hub 1-0:1.0: USB hub found [ 6.332116] hub 1-0:1.0: 4 ports detected [ 6.336572] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.341206] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.349106] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.356899] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.364741] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.371907] usb usb2: Product: xHCI Host Controller [ 6.376853] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.383063] usb usb2: SerialNumber: 3610000.xhci [ 6.388539] hub 2-0:1.0: USB hub found [ 6.391595] hub 2-0:1.0: 4 ports detected [ 6.431733] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.437818] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.439301] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.439508] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.453281] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1904000 KHz, changing to: 1907200 KHz [ 6.454342] tegra194-cpufreq ccplex: probed with BWMGR [ 6.455660] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.456299] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.456859] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.458061] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.465928] tegra194-vi5 15c10000.vi: initialized [ 6.467084] mmc0: CQHCI version 5.10 [ 6.467511] tegradc 15210000.display: disp0 connected to head1->sor [ 6.469012] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.475339] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.481662] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.488788] tegradc 15210000.display: DT parsed successfully [ 6.496653] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.497734] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.502318] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.508459] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.508470] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.516744] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.524284] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.530987] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.531176] generic_infoframe_type: 0x87 [ 6.537422] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.544169] tegradc 15200000.display: DT parsed successfully [ 6.550529] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.556880] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.562070] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.568107] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.580018] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.580027] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.588156] nvethernet 2490000.ethernet: Macsec not supported [ 6.589484] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.595093] mmc0: Command Queue Engine enabled [ 6.595099] mmc0: periodic cache flush enabled [ 6.595116] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.595676] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.595862] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.596141] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.596148] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.596326] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.597463] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.597468] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.599654] tegradc 15200000.display: probed [ 6.604039] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.605705] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.624454] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.626494] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.732146] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.732314] Console: switching to colour frame buffer device 240x67 [ 6.733614] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.738504] tegradc 15200000.display: fb registered [ 6.755991] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.762751] tegra-se-nvhost 15810000.se: initialized [ 6.762973] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.772698] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.782693] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.785264] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.791464] tegra-se-nvhost 15820000.se: initialized [ 6.797427] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.802703] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.809129] tegra-se-nvhost 15830000.se: initialized [ 6.814548] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.820023] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.826410] tegra-se-nvhost 15840000.se: initialized [ 6.832437] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.834732] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.838207] tegra_actmon d230000.actmon: in actmon_register()... [ 6.840726] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.841864] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.841872] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.842510] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.842514] Extcon AUX1(HDMI) enable [ 6.842653] tegradc 15210000.display: disp1 connected to head1->sor [ 6.842762] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.842853] tegradc 15210000.display: DT parsed successfully [ 6.842888] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.843116] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.843122] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.845413] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.845418] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.845426] usb 1-2: Manufacturer: Generic [ 6.851432] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.860316] tegradc 15210000.display: probed [ 6.862113] hub 1-2:1.0: USB hub found [ 6.863220] hub 1-2:1.0: 4 ports detected [ 6.868273] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.955873] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.960475] hvc_sysfs: hypervisor is not present [ 6.964584] random: crng init done ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.983275] tegradc 15210000.display: fb registered [ 6.983332] tegradc 15200000.display: blank - powerdown [ 7.004246] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.004252] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.004257] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.004261] usb 2-3: Manufacturer: Generic [ 7.010170] ALSA device list: [ 7.010177] No soundcards found. [ 7.013639] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.013644] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.013651] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.015071] hub 2-3:1.0: USB hub found [ 7.017210] hub 2-3:1.0: 4 ports detected [ 7.024401] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.024405] Extcon AUX1(HDMI) disable [ 7.047720] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.048531] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.060004] tegradc 15200000.display: unblank [ 7.061025] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.061210] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.067016] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.068878] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.072877] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.072881] Extcon AUX1(HDMI) enable [ 7.085628] tegradc 15200000.display: sync windows ret = 247 [ 7.123014] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.144105] tegradc 15210000.display: blank - powerdown [ 7.149017] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.149020] Extcon DP: HPD disabled [ 7.149024] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.149042] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.157339] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.161075] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.187942] Extcon HDMI: HPD enabled [ 7.188849] Freeing unused kernel memory: 3968K [ 7.191862] tegradc 15200000.display: hdmi: plugged [ 7.196677] Run /init as init process [ 7.230999] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.260318] Root device found: mmcblk0p1 [ 7.263604] Found dev node: /dev/mmcblk0p1 [ 7.295540] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.296993] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.298878] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.300286] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.301018] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.301619] usb 1-3: Product: Bluetooth Radio [ 7.301625] usb 1-3: Manufacturer: Realtek [ 7.301629] usb 1-3: SerialNumber: 00e04c000001 [ 7.311199] Rootfs mounted over mmcblk0p1 [ 7.354144] Switching from initrd to actual rootfs [ 7.516748] systemd[1]: System time before build time, advancing clock. [ 7.587858] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.592741] systemd[1]: Detected architecture arm64. [ 7.630113] systemd[1]: Set hostname to . [ 7.798672] systemd-sysv-generator[251]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.150508] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.152376] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.158027] systemd[1]: Created slice system-modprobe.slice. [ 8.162705] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.166765] systemd[1]: Created slice User and Session Slice. [ 8.170321] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.174546] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.177857] systemd[1]: Reached target User and Group Name Lookups. [ 8.181088] systemd[1]: Reached target Slices. [ 8.184179] systemd[1]: Reached target Swap. [ 8.188174] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.191815] systemd[1]: Listening on Syslog Socket. [ 8.195419] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.198817] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.203967] systemd[1]: Listening on Journal Audit Socket. [ 8.207696] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.212858] systemd[1]: Listening on Journal Socket. [ 8.216623] systemd[1]: Listening on udev Control Socket. [ 8.220294] systemd[1]: Listening on udev Kernel Socket. [ 8.228432] systemd[1]: Mounting Huge Pages File System... [ 8.236689] systemd[1]: Mounting POSIX Message Queue File System... [ 8.244467] systemd[1]: Mounting RPC Pipe File System... [ 8.252909] systemd[1]: Mounting Kernel Debug File System... [ 8.261218] systemd[1]: Mounting Kernel Trace File System... [ 8.271023] systemd[1]: Starting Journal Service... [ 8.279976] systemd[1]: Starting Set the console keyboard layout... [ 8.288275] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.291943] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.298252] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.306183] systemd[1]: Started Nameserver information manager. [ 8.311032] systemd[1]: Reached target Network (Pre). [ 8.318582] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.320728] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.327047] systemd[1]: Starting Load Kernel Modules... [ 8.335789] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.343616] systemd[1]: Starting udev Coldplug all Devices... [ 8.354887] systemd[1]: Mounted Huge Pages File System. [ 8.358999] systemd[1]: Mounted POSIX Message Queue File System. [ 8.362712] systemd[1]: Mounted RPC Pipe File System. [ 8.364860] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.370666] systemd[1]: Mounted Kernel Debug File System. [ 8.371706] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.374436] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.374443] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.374452] nvmap_page_pool_init: Total RAM pages: 1752672 [ 8.374456] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.374710] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.374889] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.375135] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.385590] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.386511] systemd[1]: Mounted Kernel Trace File System. [ 8.398452] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.404811] systemd[1]: nvfb-udev.service: Succeeded. [ 8.410563] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.422250] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.434137] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.436241] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.443410] systemd[1]: Starting Load/Save Random Seed... [ 8.451720] systemd[1]: Starting Create System Users... [ 8.483463] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.483463] [ 8.501805] systemd[1]: Finished Load/Save Random Seed. [ 8.512830] systemd[1]: Finished Load Kernel Modules. [ 8.517727] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.524329] systemd[1]: Mounting Kernel Configuration File System... [ 8.532303] systemd[1]: Started OP-TEE Client Supplicant. [ 8.541037] systemd[1]: Starting Apply Kernel Variables... [ 8.550978] systemd[1]: Finished Set the console keyboard layout. [ 8.555316] systemd[1]: Mounted Kernel Configuration File System. [ 8.566606] systemd[1]: Finished Create System Users. [ 10.035704] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.040965] imx219 9-0010: board setup failed [ 10.042265] imx219: probe of 9-0010 failed with error -121 [ 10.054511] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.061086] imx219 10-0010: board setup failed [ 10.062351] imx219: probe of 10-0010 failed with error -121 [ 10.119912] hot-surface-alert cooling state: 0 -> 1 [ 10.610327] using random self ethernet address [ 10.637358] using random host ethernet address [ 11.720300] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.720308] Creating 1 MTD partitions on "spi6.0": [ 11.720316] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.254409] using random self ethernet address [ 12.256123] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.788504] nvidia: loading out-of-tree module taints kernel. [ 58.781221] watchdog: watchdog0: watchdog did not stop! [ 59.286667] Trying to unregister non-registered hwtime source [ 62.347648] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.349712] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, grÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.585] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized cvc initialized ÿä:20 UTC 2022ÿâavfs_clk_mach_post initialized ÿä aarcÿâavfs_clk_platform_post initialized ÿäh6ÿâcvc_late initialized regulator_post initialized ÿä4 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuratiÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäon might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.481] I> register 'maxim' power off handle [0003.484] I> virtual i2c enabled [0003.484] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.617] E> invalid display type [0003.618] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.647] I> edid read success [0003.647] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.648] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.649] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.681] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 4096, height = 2160, frequency = 296703296 [0003.721] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.732] I> hdmi_enable, starting HDMI initialisation [0003.737] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.748] calling apps_init() [0003.748] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000843] Console: colour dummy device 80x25 [ 0.002308] printk: console [tty0] enabled [ 0.002370] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002408] pid_max: default: 32768 minimum: 301 [ 0.002589] LSM: Security Framework initializing [ 0.002665] Yama: becoming mindful. [ 0.002727] SELinux: Initializing. [ 0.002889] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002933] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006065] rcu: Hierarchical SRCU implementation. [ 0.006340] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007109] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007196] DTB Build time: Aug 10 2022 20:31:49 [ 0.010389] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010647] Remapping and enabling EFI services. [ 0.012601] smp: Bringing up secondary CPUs ... [ 0.045424] Detected PIPT I-cache on CPU1 [ 0.045527] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075075] Detected PIPT I-cache on CPU2 [ 0.075226] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104856] Detected PIPT I-cache on CPU3 [ 0.105041] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134794] Detected PIPT I-cache on CPU4 [ 0.134957] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164719] Detected PIPT I-cache on CPU5 [ 0.164808] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165142] smp: Brought up 1 node, 6 CPUs [ 0.165294] SMP: Total of 6 processors activated. [ 0.165352] CPU features: detected: Privileged Access Never [ 0.165375] CPU features: detected: LSE atomic instructions [ 0.165387] CPU features: detected: User Access Override [ 0.165399] CPU features: detected: 32-bit EL0 Support [ 0.165410] CPU features: detected: RAS Extension Support [ 0.165421] CPU features: detected: CRC32 instructions [ 0.165432] CPU features: detected: 32-bit EL1 Support [ 0.236032] CPU: All CPU(s) started at EL2 [ 0.242115] devtmpfs: initialized [ 0.294040] Registered cp15_barrier emulation handler [ 0.294191] Registered setend emulation handler [ 0.294216] KASLR enabled [ 0.294534] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.294559] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.295862] pinctrl core: initialized pinctrl subsystem [ 0.296932] SMBIOS 3.0.0 present. [ 0.296961] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.297669] NET: Registered protocol family 16 [ 0.299604] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.300094] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.300796] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.300854] audit: initializing netlink subsys (disabled) [ 0.301150] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.301573] thermal_sys: Registered thermal governor 'step_wise' [ 0.301579] thermal_sys: Registered thermal governor 'power_allocator' [ 0.301595] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.303985] cpuidle: using governor menu [ 0.304246] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.304663] ASID allocator initialised with 32768 entries [ 0.304902] Serial: AMBA PL011 UART driver [ 0.309447] Tegra reboot handler registered. [ 0.380114] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.380259] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.380425] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.380478] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.380618] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.380669] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.380779] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.380828] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.380984] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.381057] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.383389] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.383455] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.383491] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.383544] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.383579] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.383637] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.383669] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.383696] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.383736] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.383769] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.383798] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.383824] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.383850] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.383876] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.383902] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.383928] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.383971] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.384066] mc-err: mcerr ops are set to t19x [ 0.395399] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.395442] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.395455] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.395466] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.402609] ACPI: Interpreter disabled. [ 0.404329] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.406206] iommu: Default domain type: Translated [ 0.406304] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.406824] SCSI subsystem initialized [ 0.407043] usbcore: registered new interface driver usbfs [ 0.407104] usbcore: registered new interface driver hub [ 0.407154] usbcore: registered new device driver usb [ 0.407804] mc: Linux media interface: v0.10 [ 0.407857] videodev: Linux video capture interface: v2.00 [ 0.408340] pps_core: LinuxPPS API ver. 1 registered [ 0.408358] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.408386] PTP clock support registered [ 0.408771] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.409185] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.409304] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.410235] Registered efivars operations [ 0.419157] FPGA manager framework [ 0.419303] Advanced Linux Sound Architecture Driver Initialized. [ 0.420138] Bluetooth: Core ver 2.22 [ 0.420213] NET: Registered protocol family 31 [ 0.420230] Bluetooth: HCI device and connection manager initialized [ 0.420250] Bluetooth: HCI socket layer initialized [ 0.420267] Bluetooth: L2CAP socket layer initialized [ 0.420320] Bluetooth: SCO socket layer initialized [ 0.422348] camchar: rtcpu character device driver loaded [ 0.423260] clocksource: Switched to clocksource arch_sys_counter [ 0.825831] VFS: Disk quotas dquot_6.6.0 [ 0.825950] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.826373] pnp: PnP ACPI: disabled [ 0.840402] la/ptsa driver initialized. [ 0.840540] NET: Registered protocol family 2 [ 0.840786] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.849501] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.849656] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.850033] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.850659] TCP: Hash tables configured (established 65536 bind 65536) [ 0.850804] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.850935] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.851298] NET: Registered protocol family 1 [ 0.852257] RPC: Registered named UNIX socket transport module. [ 0.852284] RPC: Registered udp transport module. [ 0.852298] RPC: Registered tcp transport module. [ 0.852311] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.852348] PCI: CLS 0 bytes, default 64 [ 0.852593] Trying to unpack rootfs image as initramfs... [ 1.110020] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.113130] Freeing initrd memory: 8196K [ 1.118011] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.118057] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.118090] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.118442] kvm [1]: IPA Size Limit: 40 bits [ 1.118946] kvm [1]: vgic interrupt IRQ9 [ 1.119503] kvm [1]: VHE mode initialized successfully [ 1.121145] Initialise system trusted keyrings [ 1.121428] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.127394] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.128221] NFS: Registering the id_resolver key type [ 1.128258] Key type id_resolver registered [ 1.128298] Key type id_legacy registered [ 1.128397] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.128420] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.128488] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.137887] NET: Registered protocol family 38 [ 1.137910] Key type asymmetric registered [ 1.137959] Asymmetric key parser 'x509' registered [ 1.138004] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.138235] io scheduler mq-deadline registered [ 1.138253] io scheduler kyber registered [ 1.144282] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.147714] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.147836] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.147944] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.148017] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.148087] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.154225] scrncapt: init (heads:4 wins:6 planes:4) [ 1.154408] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.155517] EINJ: ACPI disabled. [ 1.159286] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.159310] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.159325] tegra-pmc: ### PMC reset level: L1 [ 1.159338] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.159415] tegra-pmc: PMC Prod config success [ 1.164474] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.169408] random: fast init done [ 1.170191] printk: console [ttyTCU0] enabled [ 2.721956] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.726587] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.731129] arm-smmu 10000000.iommu: stage 1 translation [ 2.736371] arm-smmu 10000000.iommu: stage 2 translation [ 2.742139] arm-smmu 10000000.iommu: nested translation [ 2.747231] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.754401] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.764849] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.767791] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.774085] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.782113] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.787382] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.792105] arm-smmu 12000000.iommu: stage 1 translation [ 2.797359] arm-smmu 12000000.iommu: stage 2 translation [ 2.803039] arm-smmu 12000000.iommu: nested translation [ 2.808212] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.815397] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.825691] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.828769] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.835066] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.842705] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.852241] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.855468] tegra_profiler: auth: init [ 2.860008] THERMAL EST: found 3 subdevs [ 2.863139] THERMAL EST num_resources: 0 [ 2.867274] [THERMAL EST subdev 0] [ 2.870311] [THERMAL EST subdev 1] [ 2.873999] [THERMAL EST subdev 2] [ 2.876989] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.883475] THERMAL EST: thz register success. [ 2.887689] THERMAL EST: end of probe, return err: 0 [ 2.893254] nvsciipc: loaded module [ 2.900102] tun: Universal TUN/TAP device driver, 1.6 [ 2.902759] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.908750] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.914297] e1000e: Intel(R) PRO/1000 Network Driver [ 2.919498] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.925323] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.930872] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.937085] PPP generic driver version 2.4.2 [ 2.941329] PPP BSD Compression module registered [ 2.945623] PPP Deflate Compression module registered [ 2.951098] PPP MPPE Compression module registered [ 2.955855] usbcore: registered new interface driver r8152 [ 2.961367] usbcore: registered new interface driver asix [ 2.966701] usbcore: registered new interface driver ax88179_178a [ 2.972817] usbcore: registered new interface driver cdc_ether [ 2.978766] usbcore: registered new interface driver net1080 [ 2.984368] usbcore: registered new interface driver cdc_subset [ 2.990661] usbcore: registered new interface driver zaurus [ 2.996374] usbcore: registered new interface driver cdc_ncm [ 3.002044] usbcore: registered new interface driver aqc111 [ 3.007704] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.013753] ohci-pci: OHCI PCI platform driver [ 3.018053] ohci-platform: OHCI generic platform driver [ 3.023961] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.029913] usbcore: registered new interface driver uas [ 3.034099] usbcore: registered new interface driver usb-storage [ 3.040494] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.046272] mousedev: PS/2 mouse device common for all mice [ 3.051501] usbcore: registered new interface driver xpad [ 3.059158] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.062014] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.069775] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.076560] i2c /dev entries driver [ 3.079954] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.085500] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.091006] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.096402] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.101528] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.107047] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.112441] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.125838] device-mapper: uevent: version 1.0.3 [ 3.126241] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.133156] cpuidle: Initializing cpuidle driver [ 3.136870] sdhci: Secure Digital Host Controller Interface driver [ 3.141598] sdhci: Copyright(c) Pierre Ossman [ 3.145950] Synopsys Designware Multimedia Card Interface Driver [ 3.151905] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.157867] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.158658] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.171391] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.193560] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.203313] vdd-1v0: supplied by regulator-dummy [ 3.208814] vdd-1v8-hs: supplied by regulator-dummy [ 3.213577] vdd-1v8-ls: supplied by regulator-dummy [ 3.218388] vdd-1v8-ao: supplied by regulator-dummy [ 3.222349] vddio-ddr-1v1: supplied by regulator-dummy [ 3.226794] vdd-rtc: supplied by regulator-dummy [ 3.228538] spmic-ldo1: supplied by regulator-dummy [ 3.229730] vdd-ao-3v3: supplied by regulator-dummy [ 3.235948] vddio-emmc-3v3: supplied by regulator-dummy [ 3.242174] spmic-ldo4: supplied by regulator-dummy [ 3.243431] vdd-usb-3v3: supplied by regulator-dummy [ 3.249755] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.255954] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.261533] spmic-ldo8: supplied by vdd-1v8-ls [ 3.262997] gpio-510 (gpio_default): hogged as output/high [ 3.264377] gpio-511 (gpio_default): hogged as output/high [ 3.267310] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.404004] max77686-rtc max77620-rtc: registered as rtc0 [ 3.405299] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.405595] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.229847] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.230998] hid: raw HID events driver (C) Jiri Kosina [ 4.231817] usbcore: registered new interface driver usbhid [ 4.231967] usbhid: USB HID core driver [ 4.234480] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.235936] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.029697] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.103500] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 74.613 ms) ÿá[ 4.320028] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.320700] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.321962] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.323013] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.325242] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.326025] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.326763] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.328561] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.328852] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.331397] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.336759] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.342635] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.347747] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.354039] denver_knobs_init:MTS_VERSION:55637613 [ 4.365962] t19x_cache tegra-cache: probed [ 4.369165] optee: probing for conduit method. [ 4.370151] optee: revision 3.16 (65cc2218) [ 4.371382] optee: dynamic shared memory is enabled [ 4.374607] optee: initialized driver [ 4.382151] nvpmodel: initialized successfully [ 4.382663] tegra_hv: get_hvd: not initialized yet [ 4.386976] user_ivc_mempool: hypervisor not present [ 4.393265] usbcore: registered new interface driver snd-usb-audio [ 4.399244] u32 classifier [ 4.400624] input device check on [ 4.404441] Actions configured [ 4.408293] Initializing XFRM netlink socket [ 4.413102] NET: Registered protocol family 10 [ 4.419923] Segment Routing with IPv6 [ 4.420294] NET: Registered protocol family 17 [ 4.424776] NET: Registered protocol family 15 [ 4.428972] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.442660] Bluetooth: RFCOMM socket layer initialized [ 4.447437] Bluetooth: RFCOMM ver 1.11 [ 4.451086] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.457198] Bluetooth: HIDP socket layer initialized [ 4.462651] 9pnet: Installing 9P2000 support [ 4.466438] Key type dns_resolver registered [ 4.472079] registered taskstats version 1 [ 4.474772] Loading compiled-in X.509 certificates [ 4.488035] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.490577] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.501069] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.502974] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.511355] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.519945] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.635323] tegra194-pcie 14160000.pcie: Link up [ 4.638184] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.638561] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.638721] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.639275] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.639683] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.640325] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.640903] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.654136] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.654664] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.655156] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.656793] pci 0004:01:00.0: supports D1 D2 [ 4.657028] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.668572] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.668994] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.669551] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.670067] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.670421] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.670768] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.670984] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.677455] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.685844] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.696958] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.701078] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.706641] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.713304] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.723041] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.723862] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.732560] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.740765] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.856428] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.857215] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.857473] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.857656] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.857942] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.858172] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.858564] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.859008] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.877234] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.877567] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.879610] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.880828] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.882214] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.883559] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.884530] pci 0005:00:00.0: Removing from iommu group 7 [ 5.884921] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.917625] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.938015] host1x 13e10000.host1x: initialized [ 5.939522] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.940283] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.941341] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.941947] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.943062] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.943745] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.944655] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.945199] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.949530] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.956811] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.966780] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.973577] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.983738] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.990560] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.000298] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.007598] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.017329] falcon 15340000.vic: Adding to iommu group 17 [ 6.031891] falcon 15340000.vic: initialized [ 6.032899] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.038655] falcon 15380000.nvjpg: initialized [ 6.039385] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.050873] falcon 154c0000.nvenc: initialized [ 6.051542] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.060408] falcon 15a80000.nvenc1: initialized [ 6.061081] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.072509] nvdec 15480000.nvdec: initialized [ 6.073125] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.082349] nvdec 15140000.nvdec1: initialized [ 6.082815] tsec 15500000.tsec: Adding to iommu group 18 [ 6.088756] tsec 15500000.tsec: initialized [ 6.089189] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.097700] tsec 15100000.tsecb: initialized [ 6.101765] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.126065] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.136436] gpio-374 (wifi-enable): hogged as output/high [ 6.136675] gpio-431 (camera-control-output-low): hogged as output/low [ 6.136904] gpio-432 (camera-control-output-low): hogged as output/low [ 6.138746] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.140409] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.141857] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.148917] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.153775] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.159622] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.165064] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.173819] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.180917] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.192302] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.197785] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.203801] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.212360] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.221925] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.228937] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.236695] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.242972] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.252411] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.258845] pva 16000000.pva0: Adding to iommu group 22 [ 6.284818] pva 16000000.pva0: initialized [ 6.289413] pva 16800000.pva1: Adding to iommu group 23 [ 6.300559] pva 16800000.pva1: initialized [ 6.304684] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.318233] nvdla 15880000.nvdla0: initialized [ 6.319644] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.327762] nvdla 158c0000.nvdla1: initialized [ 6.329970] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.330287] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.330565] tegradccommon 15200000.display-hub: dma mapping done [ 6.332441] tegradc 15200000.display: Adding to iommu group 26 [ 6.339937] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.340351] generic_infoframe_type: 0x87 [ 6.340573] tegradc 15200000.display: DT parsed successfully [ 6.340845] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.347910] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.349073] tegradc 15210000.display: Adding to iommu group 26 [ 6.354979] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.360659] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.367950] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.372779] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.380514] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.380528] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.381631] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.383838] random: crng init done [ 6.386912] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.394635] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.396276] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.402670] tegra_cec 3960000.tegra_cec: probed [ 6.412127] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.419136] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.425087] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.437287] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.442112] tegradc 15210000.display: disp0 connected to head1->sor [ 6.447139] kfuse 3830000.kfuse: initialized [ 6.452591] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.459915] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.466060] tegradc 15210000.display: DT parsed successfully [ 6.472149] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.472840] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.476925] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.485108] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.527407] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.531932] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.541037] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.546418] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.566236] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.566519] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.569636] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.577926] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.586593] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.593259] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.601044] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.608213] usb usb1: Product: xHCI Host Controller [ 6.612931] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.619454] usb usb1: SerialNumber: 3610000.xhci [ 6.625161] hub 1-0:1.0: USB hub found [ 6.627852] hub 1-0:1.0: 4 ports detected [ 6.632274] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.637433] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.645032] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.652496] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.660389] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.667609] usb usb2: Product: xHCI Host Controller [ 6.672573] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.678781] usb usb2: SerialNumber: 3610000.xhci [ 6.684540] hub 2-0:1.0: USB hub found [ 6.687599] hub 2-0:1.0: 4 ports detected [ 6.726269] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.732274] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.733472] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.733631] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.746797] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.747871] tegra194-cpufreq ccplex: probed with BWMGR [ 6.749254] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.749721] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.750144] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.751472] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.760759] mmc0: CQHCI version 5.10 [ 6.764057] tegra194-vi5 15c10000.vi: initialized [ 6.766400] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.767368] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.771389] generic_infoframe_type: 0x87 [ 6.777909] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.781548] tegradc 15200000.display: DT parsed successfully [ 6.789660] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.789906] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.795182] tegradc 15200000.display: Display dc.00000000bf3be67d registered with id=0 [ 6.801821] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.817182] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.817190] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.824052] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.832517] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.847275] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.855045] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.861065] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.861239] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.875309] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.891290] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.897992] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.898534] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.904598] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.912144] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.928941] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.929203] tegradc 15200000.display: probed [ 6.938929] nvethernet 2490000.ethernet: Macsec not supported [ 6.946533] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.953907] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.958145] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.965410] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.973850] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.977908] mmc0: Command Queue Engine enabled [ 6.980201] tegra-se-nvhost 15810000.se: initialized [ 6.983022] mmc0: periodic cache flush enabled [ 6.992050] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.992399] Console: switching to colour frame buffer device 240x67 [ 6.992567] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.992927] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.993519] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.994214] tegra-se-nvhost 15820000.se: initialized [ 6.995995] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.996489] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.997234] tegra-se-nvhost 15830000.se: initialized [ 6.998329] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.998788] tegradc 15200000.display: fb registered [ 6.998845] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.999534] tegra-se-nvhost 15840000.se: initialized [ 7.000953] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.002444] tegra_actmon d230000.actmon: in actmon_register()... [ 7.002602] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.002955] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.003585] hvc_sysfs: hypervisor is not present [ 7.004842] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.009555] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.030109] ALSA device list: [ 7.112701] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.112709] No soundcards found. [ 7.120606] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.122001] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.122217] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.143344] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.143354] usb 1-2: Manufacturer: Generic [ 7.154088] hub 1-2:1.0: USB hub found [ 7.157272] hub 1-2:1.0: 4 ports detected [ 7.160720] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.190615] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.192015] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.192226] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.193154] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.199508] Extcon AUX1(HDMI) enable [ 7.203584] tegradc 15210000.display: disp1 connected to head1->sor [ 7.209770] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.217107] tegradc 15210000.display: DT parsed successfully [ 7.220241] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.222536] tegradc 15210000.display: Display dc.000000002003fafc registered with id=1 [ 7.237980] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.244045] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.257425] tegradc 15210000.display: probed [ 7.257788] tegradc 15210000.display: fb registered [ 7.263302] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.264709] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.266850] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.266859] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.275447] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.277391] Freeing unused kernel memory: 3968K [ 7.300815] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.300819] usb 2-3: Manufacturer: Generic [ 7.300833] tegradc 15210000.display: blank - powerdown [ 7.307403] Run /init as init process [ 7.309312] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.311823] hub 2-3:1.0: USB hub found [ 7.313629] hub 2-3:1.0: 4 ports detected [ 7.317963] Extcon DP: HPD disabled [ 7.317993] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.330048] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.350469] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.357890] tegradc 15200000.display: blank - powerdown [ 7.387291] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.407045] Root device found: mmcblk0p1 [ 7.407686] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.407690] Extcon AUX1(HDMI) disable [ 7.409119] Found dev node: /dev/mmcblk0p1 [ 7.430858] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.431295] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.431299] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.431718] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.443845] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.445371] tegradc 15200000.display: unblank [ 7.446506] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.446684] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.448020] Rootfs mounted over mmcblk0p1 [ 7.452846] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.454693] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.458732] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.458736] Extcon AUX1(HDMI) enable [ 7.471465] tegradc 15200000.display: sync windows ret = 246 [ 7.485089] Switching from initrd to actual rootfs [ 7.507019] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.510524] Extcon HDMI: HPD enabled [ 7.513939] tegradc 15200000.display: hdmi: plugged [ 7.536508] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.537984] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.539420] usb 1-3: Product: Bluetooth Radio [ 7.540725] usb 1-3: Manufacturer: Realtek [ 7.542954] usb 1-3: SerialNumber: 00e04c000001 [ 7.658945] systemd[1]: System time before build time, advancing clock. [ 7.730463] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.735630] systemd[1]: Detected architecture arm64. [ 7.779932] systemd[1]: Set hostname to . [ 7.944513] systemd-sysv-generator[249]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.296389] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.298192] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.303931] systemd[1]: Created slice system-modprobe.slice. [ 8.308756] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.312987] systemd[1]: Created slice User and Session Slice. [ 8.316566] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.320786] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.324255] systemd[1]: Reached target User and Group Name Lookups. [ 8.327644] systemd[1]: Reached target Slices. [ 8.330847] systemd[1]: Reached target Swap. [ 8.335085] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.338968] systemd[1]: Listening on Syslog Socket. [ 8.342692] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.346231] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.350655] systemd[1]: Listening on Journal Audit Socket. [ 8.354528] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.358380] systemd[1]: Listening on Journal Socket. [ 8.362117] systemd[1]: Listening on udev Control Socket. [ 8.365726] systemd[1]: Listening on udev Kernel Socket. [ 8.374175] systemd[1]: Mounting Huge Pages File System... [ 8.382772] systemd[1]: Mounting POSIX Message Queue File System... [ 8.391050] systemd[1]: Mounting RPC Pipe File System... [ 8.400917] systemd[1]: Mounting Kernel Debug File System... [ 8.410137] systemd[1]: Mounting Kernel Trace File System... [ 8.420103] systemd[1]: Starting Journal Service... [ 8.429191] systemd[1]: Starting Set the console keyboard layout... [ 8.437474] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.441092] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.447649] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.455814] systemd[1]: Started Nameserver information manager. [ 8.460889] systemd[1]: Reached target Network (Pre). [ 8.468195] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.470211] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.478367] systemd[1]: Starting Load Kernel Modules... [ 8.486304] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.494961] systemd[1]: Starting udev Coldplug all Devices... [ 8.505251] systemd[1]: Mounted Huge Pages File System. [ 8.509280] systemd[1]: Mounted POSIX Message Queue File System. [ 8.517666] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.518038] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.519686] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.523249] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.524221] systemd[1]: Mounted RPC Pipe File System. [ 8.524833] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.527886] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.528190] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.531081] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.531255] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.531264] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.538095] systemd[1]: Mounted Kernel Debug File System. [ 8.541703] systemd[1]: Mounted Kernel Trace File System. [ 8.551419] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.556369] systemd[1]: nvfb-udev.service: Succeeded. [ 8.560345] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.569620] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.582152] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.584872] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.591973] systemd[1]: Starting Load/Save Random Seed... [ 8.600223] systemd[1]: Starting Create System Users... [ 8.635084] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.635084] [ 8.653800] systemd[1]: Finished Load/Save Random Seed. [ 8.672268] systemd[1]: Finished Create System Users. [ 8.678540] systemd[1]: Finished Load Kernel Modules. [ 8.682877] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.689659] systemd[1]: Mounting Kernel Configuration File System... [ 8.697991] systemd[1]: Started OP-TEE Client Supplicant. [ 8.705919] systemd[1]: Starting Apply Kernel Variables... [ 8.714164] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.724599] systemd[1]: Finished Set the console keyboard layout. [ 8.731384] systemd[1]: Mounted Kernel Configuration File System. [ 10.165395] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.177396] imx219 9-0010: board setup failed [ 10.178696] imx219: probe of 9-0010 failed with error -121 [ 10.220038] hot-surface-alert cooling state: 0 -> 1 [ 10.227551] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.235331] imx219 10-0010: board setup failed [ 10.237406] imx219: probe of 10-0010 failed with error -121 [ 10.927859] using random self ethernet address [ 10.929078] using random host ethernet address [ 11.603135] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.604440] Creating 1 MTD partitions on "spi6.0": [ 11.605602] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.384725] using random self ethernet address [ 12.386325] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.865621] nvidia: loading out-of-tree module taints kernel. [ 59.237577] watchdog: watchdog0: watchdog did not stop! [ 59.708344] Trying to unregister non-registered hwtime source [ 62.774619] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.776860] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy : 1, baÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.311] I> sdmmc DDR50 mode [0001.329] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.346] W> Cannot find any partition table for 00000003 [0001.347] > PARTITION_MANAGER: Failed to publish partition. [0001.363] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.364] I> Active Boot chain : 0 [0002.035] I> Relocating BR-BCT [0002.036] > DEVICE_PROD: device prod is not initialized. [0002.342] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.343] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.343] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.344] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.344] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.345] I> dram_block larger than 80000000 [0002.347] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.359] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.362] I> found decompressor handler: lz4 [0002.591] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.593] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿänalÿâadc initialized ÿä ÿâfmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11ÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä03:ÿâdmce initialized ÿä2ÿâcvc initialized ÿä3:20 UTC 202ÿâavfs_clk_mach_post initialized ÿä2 aarÿâavfs_clk_platform_post initialized ÿächÿâcvc_late initialized regulator_post initialized ÿä64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.213] I> Welcome to NVDisp-Init [0003.213] I> NVDisp-Init version: t194-f9ecfedc [0003.213] I> CPU-BL Params @ 0xca020000 [0003.214] I> 0) Base:0x00000000 Size:0x00000000 [0003.214] I> 1) Base:0xc8300000 Size:0x00100000 [0003.214] I> 2) Base:0xc9800000 Size:0x00200000 [0003.215] I> 3) Base:0xc8600000 Size:0x00200000 [0003.217] I> 4) Base:0xc8200000 Size:0x00100000 [0003.222] I> 5) Base:0xc8100000 Size:0x00100000 [0003.226] I> 6) Base:0xc9400000 Size:0x00400000 [0003.231] I> 7) Base:0xc9000000 Size:0x00400000 [0003.235] I> 8) Base:0xc8000000 Size:0x00100000 [0003.240] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.244] I> 10) Base:0xca800000 Size:0x00800000 [0003.248] I> 11) Base:0x40000000 Size:0x00040000 [0003.253] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.257] I> 13) Base:0x40046000 Size:0x00002000 [0003.262] I> 14) Base:0x40048000 Size:0x00002000 [0003.266] I> 15) Base:0xaf000000 Size:0x00004000 [0003.271] I> 16) Base:0x4004a000 Size:0x00002000 [0003.275] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.280] I> 18) Base:0x4004c000 Size:0x00002000 [0003.284] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.289] I> 20) Base:0x4004e000 Size:0x00002000 [0003.293] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.298] I> 22) Base:0x00000000 Size:0x00000000 [0003.302] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.306] I> 24) Base:0xcc000000 Size:0x02000000 [0003.311] I> 25) Base:0x40050000 Size:0x00002000 [0003.315] I> 26) Base:0x40040000 Size:0x00006000 [0003.320] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.324] I> 28) Base:0xc8400000 Size:0x00200000 [0003.329] I> 29) Base:0xc8800000 Size:0x00400000 [0003.333] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.338] I> 31) Base:0x00000000 Size:0x00000000 [0003.342] I> 32) Base:0xf8000000 Size:0x08000000 [0003.347] I> 33) Base:0xce000000 Size:0x2a000000 [0003.351] I> 34) Base:0xcb000000 Size:0x01000000 [0003.356] I> 35) Base:0xae000000 Size:0x01000000 [0003.360] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.364] I> 37) Base:0xca000000 Size:0x00800000 [0003.369] I> 38) Base:0x80000000 Size:0x20000000 [0003.373] I> 39) Base:0xb0000000 Size:0x08000000 [0003.378] I> 40) Base:0x00000000 Size:0x00000000 [0003.382] I> 41) Base:0x00000000 Size:0x00000000 [0003.387] I> 42) Base:0x00000000 Size:0x00000000 [0003.391] I> 43) Base:0x00000000 Size:0x00000000 [0003.396] I> 44) Base:0x00000000 Size:0x00000000 [0003.400] I> 45) Base:0x00000000 Size:0x00000000 [0003.405] GIC-SPI Target CPU: 0 [0003.408] Interrupts Init done [0003.411] calling constructors [0003.413] initializing heap [0003.416] I> Heap: [0xa0960000 ... 0xadf00000] [0003.420] initializing threads [0003.423] initializing timers [0003.426] creating bootstrap completion thread [0003.430] top of bootstrap2() [0003.433] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.438] initializing platform [0003.441] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.446] W> device prod register failed [0003.450] I> Bl_dtb @0xadf00000 [0003.453] I> gpio framework initialized [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.469] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.476] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.494] I> Boot-device: QSPI [0003.497] I> Boot_device: QSPI_FLASH instance: 0 [0003.502] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.512] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.519] I> QSPI source rate = 204000 Khz [0003.523] I> Requested rate for QSPI clock = 34000 Khz [0003.528] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.533] I> tx_clk_tap_delay : 0 [0003.535] I> rx_clk_tap_delay : 16 [0003.539] I> QSPI Flash Size = 32 MB [0003.547] I> Qspi initialized successfully [0003.547] I> qspi flash-0 params source = boot args [0003.551] W> No board IDs available [0003.554] E> Failed to get board id info! [0003.560] I> sdmmc-3 params source = safe params [0003.567] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.569] W> Cannot find any partition table for 00000003 [0003.573] E> Failed to publish 00000003 [0003.577] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.606] I> regulator 'vdd-hdmi-5v0' already enabled [0003.607] I> hdmi cable connected [0003.613] W> set volts not configured for 'vdd-1v0' [0003.619] W> set volts not configured for 'vdd-1v8-hs' [0003.619] I> retrieved tmds range from prod_list_hdmi_soc [0003.626] E> invalid display type [0003.627] E> cannot find any other nvdisp nodes [0003.644] I> edid read success [0003.656] I> edid read success [0003.657] I> width = 640, height = 480, frequency = 25174825 [0003.657] I> width = 1920, height = 1080, frequency = 148500000 [0003.657] I> width = 1280, height = 768, frequency = 79500000 [0003.658] I> width = 1360, height = 768, frequency = 85500000 [0003.658] I> width = 720, height = 480, frequency = 26973026 [0003.662] I> width = 720, height = 576, frequency = 26973026 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1280, height = 720, frequency = 74175824 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 1920, height = 1080, frequency = 148351648 [0003.690] I> width = 720, height = 480, frequency = 26973026 [0003.696] I> width = 720, height = 576, frequency = 26973026 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 3840, height = 2160, frequency = 296703296 [0003.725] I> width = 4096, height = 2160, frequency = 296703296 [0003.730] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.742] I> hdmi_enable, starting HDMI initialisation [0003.746] I> hdmi_enable, HDMI initialisation complete [0003.756] initializing target [0003.757] calling apps_init() [0003.757] starting app kernel_boot_app [0003.758] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000590] Console: colour dummy device 80x25 [ 0.002045] printk: console [tty0] enabled [ 0.002113] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002177] pid_max: default: 32768 minimum: 301 [ 0.002347] LSM: Security Framework initializing [ 0.002421] Yama: becoming mindful. [ 0.002477] SELinux: Initializing. [ 0.002620] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002668] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005857] rcu: Hierarchical SRCU implementation. [ 0.006102] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006780] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006850] DTB Build time: Aug 10 2022 20:31:49 [ 0.009528] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009765] Remapping and enabling EFI services. [ 0.011654] smp: Bringing up secondary CPUs ... [ 0.040961] Detected PIPT I-cache on CPU1 [ 0.041083] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074846] Detected PIPT I-cache on CPU2 [ 0.074995] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104497] Detected PIPT I-cache on CPU3 [ 0.104634] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134391] Detected PIPT I-cache on CPU4 [ 0.134504] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164112] Detected PIPT I-cache on CPU5 [ 0.164270] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164610] smp: Brought up 1 node, 6 CPUs [ 0.164840] SMP: Total of 6 processors activated. [ 0.164897] CPU features: detected: Privileged Access Never [ 0.164936] CPU features: detected: LSE atomic instructions [ 0.164950] CPU features: detected: User Access Override [ 0.164963] CPU features: detected: 32-bit EL0 Support [ 0.164974] CPU features: detected: RAS Extension Support [ 0.164985] CPU features: detected: CRC32 instructions [ 0.164997] CPU features: detected: 32-bit EL1 Support [ 0.235550] CPU: All CPU(s) started at EL2 [ 0.243543] devtmpfs: initialized [ 0.290192] Registered cp15_barrier emulation handler [ 0.290321] Registered setend emulation handler [ 0.290363] KASLR enabled [ 0.290661] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.290688] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292024] pinctrl core: initialized pinctrl subsystem [ 0.293054] SMBIOS 3.0.0 present. [ 0.293082] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.293700] NET: Registered protocol family 16 [ 0.295603] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296101] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296808] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296865] audit: initializing netlink subsys (disabled) [ 0.297139] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.297516] thermal_sys: Registered thermal governor 'step_wise' [ 0.297522] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297536] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299615] cpuidle: using governor menu [ 0.299955] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300303] ASID allocator initialised with 32768 entries [ 0.300506] Serial: AMBA PL011 UART driver [ 0.303508] Tegra reboot handler registered. [ 0.381891] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.382006] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.382186] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.382249] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.382401] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.382444] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.382550] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.382600] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.382726] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.382897] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.385412] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.385449] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.385478] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.385504] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.385552] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.385579] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.385604] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.385630] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.385655] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.385680] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.385706] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.385731] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.385762] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.385787] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.385813] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.385838] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.385868] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.385979] mc-err: mcerr ops are set to t19x [ 0.398109] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.398130] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.398141] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.398152] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.404718] ACPI: Interpreter disabled. [ 0.405881] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.407351] iommu: Default domain type: Translated [ 0.407409] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.407868] SCSI subsystem initialized [ 0.408034] usbcore: registered new interface driver usbfs [ 0.408076] usbcore: registered new interface driver hub [ 0.408109] usbcore: registered new device driver usb [ 0.408558] mc: Linux media interface: v0.10 [ 0.408591] videodev: Linux video capture interface: v2.00 [ 0.408938] pps_core: LinuxPPS API ver. 1 registered [ 0.408949] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.408970] PTP clock support registered [ 0.409179] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.409542] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.409647] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.410551] Registered efivars operations [ 0.417630] FPGA manager framework [ 0.417737] Advanced Linux Sound Architecture Driver Initialized. [ 0.418289] Bluetooth: Core ver 2.22 [ 0.418328] NET: Registered protocol family 31 [ 0.418339] Bluetooth: HCI device and connection manager initialized [ 0.418354] Bluetooth: HCI socket layer initialized [ 0.418369] Bluetooth: L2CAP socket layer initialized [ 0.418395] Bluetooth: SCO socket layer initialized [ 0.420278] camchar: rtcpu character device driver loaded [ 0.421004] clocksource: Switched to clocksource arch_sys_counter [ 0.719468] VFS: Disk quotas dquot_6.6.0 [ 0.719544] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.719859] pnp: PnP ACPI: disabled [ 0.732569] la/ptsa driver initialized. [ 0.732704] NET: Registered protocol family 2 [ 0.732861] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.737469] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.737582] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.737842] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.738271] TCP: Hash tables configured (established 65536 bind 65536) [ 0.738393] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.738491] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.738718] NET: Registered protocol family 1 [ 0.739743] RPC: Registered named UNIX socket transport module. [ 0.739786] RPC: Registered udp transport module. [ 0.739811] RPC: Registered tcp transport module. [ 0.739835] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.739903] PCI: CLS 0 bytes, default 64 [ 0.740246] Trying to unpack rootfs image as initramfs... [ 0.999915] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.003107] Freeing initrd memory: 8196K [ 1.007534] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.007578] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.007654] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.008045] kvm [1]: IPA Size Limit: 40 bits [ 1.008597] kvm [1]: vgic interrupt IRQ9 [ 1.009226] kvm [1]: VHE mode initialized successfully [ 1.010936] Initialise system trusted keyrings [ 1.011306] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.018469] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.019399] NFS: Registering the id_resolver key type [ 1.019441] Key type id_resolver registered [ 1.019459] Key type id_legacy registered [ 1.019545] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.019583] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.019628] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.029869] NET: Registered protocol family 38 [ 1.029894] Key type asymmetric registered [ 1.029910] Asymmetric key parser 'x509' registered [ 1.029988] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.030276] io scheduler mq-deadline registered [ 1.030295] io scheduler kyber registered [ 1.035980] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.038918] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.038995] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.039112] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.039209] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.039283] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.044473] scrncapt: init (heads:4 wins:6 planes:4) [ 1.044546] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.045658] EINJ: ACPI disabled. [ 1.048819] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.048850] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.048865] tegra-pmc: ### PMC reset level: L1 [ 1.048879] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.048951] tegra-pmc: PMC Prod config success [ 1.054052] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.069386] random: fast init done [ 1.071017] printk: console [ttyTCU0] enabled [ 2.611469] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.615991] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.620579] arm-smmu 10000000.iommu: stage 1 translation [ 2.625807] arm-smmu 10000000.iommu: stage 2 translation [ 2.631304] arm-smmu 10000000.iommu: nested translation [ 2.636640] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.643790] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.655303] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.657176] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.663474] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.671444] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.676519] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.681248] arm-smmu 12000000.iommu: stage 1 translation [ 2.687005] arm-smmu 12000000.iommu: stage 2 translation [ 2.692171] arm-smmu 12000000.iommu: nested translation [ 2.697860] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.705036] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.716340] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.717925] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.724717] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.731849] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.742042] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.744856] tegra_profiler: auth: init [ 2.749402] THERMAL EST: found 3 subdevs [ 2.752526] THERMAL EST num_resources: 0 [ 2.756669] [THERMAL EST subdev 0] [ 2.759723] [THERMAL EST subdev 1] [ 2.763395] [THERMAL EST subdev 2] [ 2.766380] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.773168] THERMAL EST: thz register success. [ 2.777336] THERMAL EST: end of probe, return err: 0 [ 2.782290] nvsciipc: loaded module [ 2.789764] tun: Universal TUN/TAP device driver, 1.6 [ 2.791955] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.798145] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.804005] e1000e: Intel(R) PRO/1000 Network Driver [ 2.808634] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.814971] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.820265] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.826530] PPP generic driver version 2.4.2 [ 2.830459] PPP BSD Compression module registered [ 2.834982] PPP Deflate Compression module registered [ 2.840229] PPP MPPE Compression module registered [ 2.845509] usbcore: registered new interface driver r8152 [ 2.850764] usbcore: registered new interface driver asix [ 2.856344] usbcore: registered new interface driver ax88179_178a [ 2.862476] usbcore: registered new interface driver cdc_ether [ 2.868159] usbcore: registered new interface driver net1080 [ 2.873761] usbcore: registered new interface driver cdc_subset [ 2.880065] usbcore: registered new interface driver zaurus [ 2.885753] usbcore: registered new interface driver cdc_ncm [ 2.891428] usbcore: registered new interface driver aqc111 [ 2.897094] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.902898] ohci-pci: OHCI PCI platform driver [ 2.907447] ohci-platform: OHCI generic platform driver [ 2.913328] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.919350] usbcore: registered new interface driver uas [ 2.923497] usbcore: registered new interface driver usb-storage [ 2.929892] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.935721] mousedev: PS/2 mouse device common for all mice [ 2.940925] usbcore: registered new interface driver xpad [ 2.948607] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.951411] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.959179] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.965694] i2c /dev entries driver [ 2.969324] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.975167] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.980547] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.985854] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.991256] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.996757] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.002083] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.015307] device-mapper: uevent: version 1.0.3 [ 3.015751] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.022313] cpuidle: Initializing cpuidle driver [ 3.026648] sdhci: Secure Digital Host Controller Interface driver [ 3.031242] sdhci: Copyright(c) Pierre Ossman [ 3.035345] Synopsys Designware Multimedia Card Interface Driver [ 3.041293] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.047232] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.048063] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.060533] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.079153] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.088107] vdd-1v0: supplied by regulator-dummy [ 3.093540] vdd-1v8-hs: supplied by regulator-dummy [ 3.098238] vdd-1v8-ls: supplied by regulator-dummy [ 3.102950] vdd-1v8-ao: supplied by regulator-dummy [ 3.106741] vddio-ddr-1v1: supplied by regulator-dummy [ 3.111103] vdd-rtc: supplied by regulator-dummy [ 3.112671] spmic-ldo1: supplied by regulator-dummy [ 3.113831] vdd-ao-3v3: supplied by regulator-dummy [ 3.120030] vddio-emmc-3v3: supplied by regulator-dummy [ 3.126188] spmic-ldo4: supplied by regulator-dummy [ 3.127481] vdd-usb-3v3: supplied by regulator-dummy [ 3.133622] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.139671] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.145144] spmic-ldo8: supplied by vdd-1v8-ls [ 3.146455] gpio-510 (gpio_default): hogged as output/high [ 3.147725] gpio-511 (gpio_default): hogged as output/high [ 3.154388] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.292678] max77686-rtc max77620-rtc: registered as rtc0 [ 3.293619] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.293916] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.986101] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.987230] hid: raw HID events driver (C) Jiri Kosina [ 3.987862] usbcore: registered new interface driver usbhid [ 3.988002] usbhid: USB HID core driver [ 3.989720] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.990965] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.016489] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.092046] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.368 ms) ÿá[ 4.076177] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.076733] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.077880] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.078565] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.080114] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.080757] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.081407] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.082657] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.082937] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.084731] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.092464] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.098723] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.103630] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.110294] denver_knobs_init:MTS_VERSION:55637613 [ 4.122859] t19x_cache tegra-cache: probed [ 4.125324] optee: probing for conduit method. [ 4.126183] optee: revision 3.16 (65cc2218) [ 4.127172] optee: dynamic shared memory is enabled [ 4.131290] optee: initialized driver [ 4.138001] nvpmodel: initialized successfully [ 4.138961] tegra_hv: get_hvd: not initialized yet [ 4.143571] user_ivc_mempool: hypervisor not present [ 4.149380] usbcore: registered new interface driver snd-usb-audio [ 4.155903] u32 classifier [ 4.157370] input device check on [ 4.161026] Actions configured [ 4.164474] Initializing XFRM netlink socket [ 4.169419] NET: Registered protocol family 10 [ 4.176010] Segment Routing with IPv6 [ 4.176730] NET: Registered protocol family 17 [ 4.181287] NET: Registered protocol family 15 [ 4.185385] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.198766] Bluetooth: RFCOMM socket layer initialized [ 4.203894] Bluetooth: RFCOMM ver 1.11 [ 4.207572] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.213637] Bluetooth: HIDP socket layer initialized [ 4.219157] 9pnet: Installing 9P2000 support [ 4.222843] Key type dns_resolver registered [ 4.228606] registered taskstats version 1 [ 4.231252] Loading compiled-in X.509 certificates [ 4.244353] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.247429] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.257553] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.259424] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.267817] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.276453] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.393128] tegra194-pcie 14160000.pcie: Link up [ 4.396270] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.396479] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.396617] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.396956] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.397236] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.397590] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.398063] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.409933] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.410398] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.410953] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.412403] pci 0004:01:00.0: supports D1 D2 [ 4.412561] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.424094] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.424404] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.424674] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.425411] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.425722] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.425953] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.427649] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.435113] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.443913] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.454270] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.458466] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.464253] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.471214] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.480431] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.481857] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.490002] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.498725] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.614192] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.615024] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.615249] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.615398] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.615691] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.615899] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.616356] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.616826] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.636789] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.637252] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.639423] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.640866] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.642697] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.644474] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.645800] pci 0005:00:00.0: Removing from iommu group 7 [ 5.646064] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.683101] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.707866] host1x 13e10000.host1x: initialized [ 5.710010] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.710923] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.712185] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.712950] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.714183] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.714854] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.716021] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.716615] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.717929] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.718662] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.724566] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.731295] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.741526] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.748638] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.758436] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.765149] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.775068] falcon 15340000.vic: Adding to iommu group 17 [ 5.790186] falcon 15340000.vic: initialized [ 5.791172] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.796525] falcon 15380000.nvjpg: initialized [ 5.797254] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.808075] falcon 154c0000.nvenc: initialized [ 5.808720] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.818369] falcon 15a80000.nvenc1: initialized [ 5.819045] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.832453] nvdec 15480000.nvdec: initialized [ 5.832984] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.842985] nvdec 15140000.nvdec1: initialized [ 5.843460] tsec 15500000.tsec: Adding to iommu group 18 [ 5.849089] tsec 15500000.tsec: initialized [ 5.849540] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.855792] tsec 15100000.tsecb: initialized [ 5.859615] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.889793] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.903437] gpio-374 (wifi-enable): hogged as output/high [ 5.903740] gpio-431 (camera-control-output-low): hogged as output/low [ 5.904059] gpio-432 (camera-control-output-low): hogged as output/low [ 5.905806] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.907795] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.908358] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.909851] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.911784] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.917484] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.923446] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.931740] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.939332] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.951109] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.956072] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.961593] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.970368] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.979538] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.986945] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.994679] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.000422] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.010521] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.016325] pva 16000000.pva0: Adding to iommu group 22 [ 6.043029] pva 16000000.pva0: initialized [ 6.047514] pva 16800000.pva1: Adding to iommu group 23 [ 6.058509] pva 16800000.pva1: initialized [ 6.062784] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.077101] nvdla 15880000.nvdla0: initialized [ 6.078522] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.087930] nvdla 158c0000.nvdla1: initialized [ 6.092119] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.092382] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.092499] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.092548] tegradc 15200000.display: Adding to iommu group 26 [ 6.092817] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.093717] tegradccommon 15200000.display-hub: dma mapping done [ 6.095334] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.100177] tegradc 15210000.display: Adding to iommu group 26 [ 6.100224] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.106508] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.112891] generic_infoframe_type: 0x87 [ 6.118298] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.122506] tegradc 15200000.display: DT parsed successfully [ 6.128033] tegra_cec 3960000.tegra_cec: probed [ 6.133883] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.139661] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.150779] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.154993] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.160409] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.160424] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.161281] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.167983] kfuse 3830000.kfuse: initialized [ 6.175430] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.176850] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.184526] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.192520] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.193856] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.200567] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.211982] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.219190] tegradc 15210000.display: disp0 connected to head1->sor [ 6.225628] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.230691] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.239835] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.244040] tegradc 15210000.display: DT parsed successfully [ 6.250753] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.258758] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.296132] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.300734] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.321259] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.321712] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.323975] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.332736] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.341293] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.347813] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.355029] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.362281] usb usb1: Product: xHCI Host Controller [ 6.367516] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.373848] usb usb1: SerialNumber: 3610000.xhci [ 6.379978] hub 1-0:1.0: USB hub found [ 6.382240] hub 1-0:1.0: 4 ports detected [ 6.386806] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.391572] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.399416] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.407193] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.414985] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.422236] usb usb2: Product: xHCI Host Controller [ 6.426898] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.433109] usb usb2: SerialNumber: 3610000.xhci [ 6.439024] hub 2-0:1.0: USB hub found [ 6.441058] random: crng init done [ 6.441952] hub 2-0:1.0: 4 ports detected [ 6.491567] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.498726] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.500281] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.500535] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.514369] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.515445] tegra194-cpufreq ccplex: probed with BWMGR [ 6.516684] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.517237] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.517687] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.519201] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.527311] tegra194-vi5 15c10000.vi: initialized [ 6.528793] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.529123] generic_infoframe_type: 0x87 [ 6.529376] tegradc 15200000.display: DT parsed successfully [ 6.530569] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.535095] tegradc 15200000.display: Display dc.00000000b7e42c37 registered with id=0 [ 6.541413] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.557117] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.557136] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.563780] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.563790] mmc0: CQHCI version 5.10 [ 6.572195] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.578584] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.582456] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.597421] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.605361] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.611159] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.624399] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.629080] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.638068] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.640951] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.649023] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.649412] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.649417] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.655843] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.671813] tegradc 15200000.display: probed [ 6.679002] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.696763] nvethernet 2490000.ethernet: Macsec not supported [ 6.703742] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.711360] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.716110] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.723159] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.731315] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.738083] tegra-se-nvhost 15810000.se: initialized [ 6.746305] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.747790] Console: switching to colour frame buffer device 240x67 [ 6.748025] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.753614] tegradc 15200000.display: fb registered [ 6.753680] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.760212] tegra-se-nvhost 15820000.se: initialized [ 6.765507] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.772340] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.775547] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.781744] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.800729] tegra-se-nvhost 15830000.se: initialized [ 6.802319] mmc0: Command Queue Engine enabled [ 6.805567] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.808922] mmc0: periodic cache flush enabled [ 6.815327] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.819497] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.820039] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.826343] tegra-se-nvhost 15840000.se: initialized [ 6.832265] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.838600] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.845272] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.850348] tegra_actmon d230000.actmon: in actmon_register()... [ 6.850767] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.851809] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.851818] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.852387] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.852390] Extcon AUX1(HDMI) enable [ 6.852529] tegradc 15210000.display: disp1 connected to head1->sor [ 6.852665] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.852731] tegradc 15210000.display: DT parsed successfully [ 6.852768] tegradc 15210000.display: Display dc.00000000baba216c registered with id=1 [ 6.852892] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.852897] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.853437] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.855409] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.859508] tegradc 15210000.display: probed [ 6.863573] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.869538] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.869543] usb 1-2: Manufacturer: Generic [ 6.871611] hub 1-2:1.0: USB hub found [ 6.878778] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.887362] hub 1-2:1.0: 4 ports detected [ 6.894243] hvc_sysfs: hypervisor is not present [ 6.965918] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.995499] ALSA device list: [ 7.009630] No soundcards found. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.012692] tegradc 15210000.display: fb registered [ 7.012821] tegradc 15200000.display: blank - powerdown [ 7.016107] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.016112] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.016119] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.034579] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.034585] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.034588] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.034592] usb 2-3: Manufacturer: Generic [ 7.045441] hub 2-3:1.0: USB hub found [ 7.047291] hub 2-3:1.0: 4 ports detected [ 7.051105] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.051109] Extcon AUX1(HDMI) disable [ 7.074413] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.075385] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.088368] tegradc 15200000.display: unblank [ 7.089445] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.089640] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.095319] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.097249] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.101290] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.101294] Extcon AUX1(HDMI) enable [ 7.114001] tegradc 15200000.display: sync windows ret = 247 [ 7.141708] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.153089] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.172320] tegradc 15210000.display: blank - powerdown [ 7.177374] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.177378] Extcon DP: HPD disabled [ 7.177382] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.177394] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.185436] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.189081] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.196158] Extcon HDMI: HPD enabled [ 7.196164] tegradc 15200000.display: hdmi: plugged [ 7.206253] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.231443] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.238262] Freeing unused kernel memory: 3968K [ 7.241984] Run /init as init process [ 7.300874] Root device found: mmcblk0p1 [ 7.304452] Found dev node: /dev/mmcblk0p1 [ 7.322249] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.323697] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.325123] usb 1-3: Product: Bluetooth Radio [ 7.326462] usb 1-3: Manufacturer: Realtek [ 7.327772] usb 1-3: SerialNumber: 00e04c000001 [ 7.341114] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.346516] Rootfs mounted over mmcblk0p1 [ 7.377254] Switching from initrd to actual rootfs [ 7.521405] systemd[1]: System time before build time, advancing clock. [ 7.589979] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.594985] systemd[1]: Detected architecture arm64. [ 7.642116] systemd[1]: Set hostname to . [ 7.815418] systemd-sysv-generator[252]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.163508] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.165522] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.171030] systemd[1]: Created slice system-modprobe.slice. [ 8.175824] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.180236] systemd[1]: Created slice User and Session Slice. [ 8.183856] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.188230] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.191690] systemd[1]: Reached target User and Group Name Lookups. [ 8.195062] systemd[1]: Reached target Slices. [ 8.198262] systemd[1]: Reached target Swap. [ 8.202390] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.206260] systemd[1]: Listening on Syslog Socket. [ 8.209935] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.213574] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.218002] systemd[1]: Listening on Journal Audit Socket. [ 8.221836] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.225813] systemd[1]: Listening on Journal Socket. [ 8.229720] systemd[1]: Listening on udev Control Socket. [ 8.233413] systemd[1]: Listening on udev Kernel Socket. [ 8.241704] systemd[1]: Mounting Huge Pages File System... [ 8.252605] systemd[1]: Mounting POSIX Message Queue File System... [ 8.260851] systemd[1]: Mounting RPC Pipe File System... [ 8.269418] systemd[1]: Mounting Kernel Debug File System... [ 8.277783] systemd[1]: Mounting Kernel Trace File System... [ 8.287674] systemd[1]: Starting Journal Service... [ 8.296437] systemd[1]: Starting Set the console keyboard layout... [ 8.304747] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.308511] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.314969] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.323145] systemd[1]: Started Nameserver information manager. [ 8.328245] systemd[1]: Reached target Network (Pre). [ 8.335430] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.337453] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.345472] systemd[1]: Starting Load Kernel Modules... [ 8.353300] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.362190] systemd[1]: Starting udev Coldplug all Devices... [ 8.371977] systemd[1]: Mounted Huge Pages File System. [ 8.375956] systemd[1]: Mounted POSIX Message Queue File System. [ 8.379667] systemd[1]: Mounted RPC Pipe File System. [ 8.381676] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.384697] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.387182] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.388866] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.389747] systemd[1]: Mounted Kernel Debug File System. [ 8.390447] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.393301] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.393472] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.393712] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.393857] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.393865] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.403472] systemd[1]: Mounted Kernel Trace File System. [ 8.411105] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.419122] systemd[1]: nvfb-udev.service: Succeeded. [ 8.423390] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.434798] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.447493] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.449362] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.456710] systemd[1]: Starting Load/Save Random Seed... [ 8.465913] systemd[1]: Starting Create System Users... [ 8.486387] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.486387] [ 8.512640] systemd[1]: Finished Load/Save Random Seed. [ 8.523470] systemd[1]: Finished Load Kernel Modules. [ 8.528318] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.535442] systemd[1]: Mounting Kernel Configuration File System... [ 8.543647] systemd[1]: Started OP-TEE Client Supplicant. [ 8.553806] systemd[1]: Starting Apply Kernel Variables... [ 8.563713] systemd[1]: Finished Set the console keyboard layout. [ 8.568186] systemd[1]: Mounted Kernel Configuration File System. [ 8.579720] systemd[1]: Finished Create System Users. [ 10.038536] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.043718] imx219 9-0010: board setup failed [ 10.043822] imx219: probe of 9-0010 failed with error -121 [ 10.064146] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.070587] imx219 10-0010: board setup failed [ 10.071870] imx219: probe of 10-0010 failed with error -121 [ 10.197277] hot-surface-alert cooling state: 0 -> 1 [ 10.681320] using random self ethernet address [ 10.682541] using random host ethernet address [ 11.614970] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.616227] Creating 1 MTD partitions on "spi6.0": [ 11.621337] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.140580] using random self ethernet address [ 12.141815] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.777148] nvidia: loading out-of-tree module taints kernel. [ 59.403944] watchdog: watchdog0: watchdog did not stop! [ 59.897609] Trying to unregister non-registered hwtime source [ 62.956591] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.958188] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] àÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.644] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.744] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000779] Console: colour dummy device 80x25 [ 0.002201] printk: console [tty0] enabled [ 0.002270] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002305] pid_max: default: 32768 minimum: 301 [ 0.002489] LSM: Security Framework initializing [ 0.002546] Yama: becoming mindful. [ 0.002588] SELinux: Initializing. [ 0.002735] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002778] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005967] rcu: Hierarchical SRCU implementation. [ 0.006220] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006900] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006975] DTB Build time: Aug 10 2022 20:31:49 [ 0.009673] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009919] Remapping and enabling EFI services. [ 0.011947] smp: Bringing up secondary CPUs ... [ 0.041284] Detected PIPT I-cache on CPU1 [ 0.041380] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070945] Detected PIPT I-cache on CPU2 [ 0.071103] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100738] Detected PIPT I-cache on CPU3 [ 0.100877] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130580] Detected PIPT I-cache on CPU4 [ 0.130681] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160494] Detected PIPT I-cache on CPU5 [ 0.160629] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160931] smp: Brought up 1 node, 6 CPUs [ 0.161206] SMP: Total of 6 processors activated. [ 0.161246] CPU features: detected: Privileged Access Never [ 0.161269] CPU features: detected: LSE atomic instructions [ 0.161284] CPU features: detected: User Access Override [ 0.161298] CPU features: detected: 32-bit EL0 Support [ 0.161311] CPU features: detected: RAS Extension Support [ 0.161324] CPU features: detected: CRC32 instructions [ 0.161337] CPU features: detected: 32-bit EL1 Support [ 0.231535] CPU: All CPU(s) started at EL2 [ 0.239042] devtmpfs: initialized [ 0.289223] Registered cp15_barrier emulation handler [ 0.289342] Registered setend emulation handler [ 0.289363] KASLR enabled [ 0.289640] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289666] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290965] pinctrl core: initialized pinctrl subsystem [ 0.291956] SMBIOS 3.0.0 present. [ 0.291985] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292590] NET: Registered protocol family 16 [ 0.294675] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295184] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295896] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295957] audit: initializing netlink subsys (disabled) [ 0.296237] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296712] thermal_sys: Registered thermal governor 'step_wise' [ 0.296719] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296735] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299408] cpuidle: using governor menu [ 0.299889] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300248] ASID allocator initialised with 32768 entries [ 0.300501] Serial: AMBA PL011 UART driver [ 0.303927] Tegra reboot handler registered. [ 0.377132] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.377237] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.377430] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.377485] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.377622] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.377659] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.377775] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.377811] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.377940] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.377991] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.380178] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.380212] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.380240] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.380266] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.380294] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.380319] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.380357] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.380389] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.380413] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.380435] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.380458] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.380496] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.380521] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.380543] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.380587] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.380624] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.380649] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.380732] mc-err: mcerr ops are set to t19x [ 0.392932] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392955] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.392967] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392978] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.400039] ACPI: Interpreter disabled. [ 0.401104] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.402231] iommu: Default domain type: Translated [ 0.402293] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.402637] SCSI subsystem initialized [ 0.402783] usbcore: registered new interface driver usbfs [ 0.402820] usbcore: registered new interface driver hub [ 0.402852] usbcore: registered new device driver usb [ 0.403308] mc: Linux media interface: v0.10 [ 0.403337] videodev: Linux video capture interface: v2.00 [ 0.403628] pps_core: LinuxPPS API ver. 1 registered [ 0.403640] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403658] PTP clock support registered [ 0.403847] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404167] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.404257] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.404790] Registered efivars operations [ 0.409741] FPGA manager framework [ 0.409843] Advanced Linux Sound Architecture Driver Initialized. [ 0.410424] Bluetooth: Core ver 2.22 [ 0.410459] NET: Registered protocol family 31 [ 0.410476] Bluetooth: HCI device and connection manager initialized [ 0.410495] Bluetooth: HCI socket layer initialized [ 0.410510] Bluetooth: L2CAP socket layer initialized [ 0.410532] Bluetooth: SCO socket layer initialized [ 0.412184] camchar: rtcpu character device driver loaded [ 0.413063] clocksource: Switched to clocksource arch_sys_counter [ 0.694705] VFS: Disk quotas dquot_6.6.0 [ 0.694775] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.695164] pnp: PnP ACPI: disabled [ 0.707198] la/ptsa driver initialized. [ 0.707330] NET: Registered protocol family 2 [ 0.707497] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.712082] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.712161] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.712460] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.712897] TCP: Hash tables configured (established 65536 bind 65536) [ 0.713122] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.713244] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.713445] NET: Registered protocol family 1 [ 0.714144] RPC: Registered named UNIX socket transport module. [ 0.714159] RPC: Registered udp transport module. [ 0.714192] RPC: Registered tcp transport module. [ 0.714202] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.714217] PCI: CLS 0 bytes, default 64 [ 0.714428] Trying to unpack rootfs image as initramfs... [ 0.905888] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.907928] Freeing initrd memory: 8196K [ 0.912249] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.912291] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.912328] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.912748] kvm [1]: IPA Size Limit: 40 bits [ 0.913332] kvm [1]: vgic interrupt IRQ9 [ 0.913870] kvm [1]: VHE mode initialized successfully [ 0.915239] Initialise system trusted keyrings [ 0.915539] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.920524] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.921268] NFS: Registering the id_resolver key type [ 0.921296] Key type id_resolver registered [ 0.921307] Key type id_legacy registered [ 0.921403] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.921422] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.921468] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.931056] NET: Registered protocol family 38 [ 0.931076] Key type asymmetric registered [ 0.931087] Asymmetric key parser 'x509' registered [ 0.931126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.931339] io scheduler mq-deadline registered [ 0.931353] io scheduler kyber registered [ 0.935838] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.938019] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.938085] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.938153] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.938220] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.938284] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.942787] scrncapt: init (heads:4 wins:6 planes:4) [ 0.942948] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.943736] EINJ: ACPI disabled. [ 0.946754] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.946775] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.946786] tegra-pmc: ### PMC reset level: L1 [ 0.946795] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.946832] tegra-pmc: PMC Prod config success [ 0.952246] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.956817] random: fast init done [ 0.957875] printk: console [ttyTCU0] enabled [ 2.509356] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.513787] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.518420] arm-smmu 10000000.iommu: stage 1 translation [ 2.524106] arm-smmu 10000000.iommu: stage 2 translation [ 2.529351] arm-smmu 10000000.iommu: nested translation [ 2.534962] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.542130] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.553697] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.555223] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.561548] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.569609] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.574844] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.579579] arm-smmu 12000000.iommu: stage 1 translation [ 2.584822] arm-smmu 12000000.iommu: stage 2 translation [ 2.590505] arm-smmu 12000000.iommu: nested translation [ 2.595677] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.602853] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.614346] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.616210] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.622542] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.630314] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.639793] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.643208] tegra_profiler: auth: init [ 2.647230] THERMAL EST: found 3 subdevs [ 2.650890] THERMAL EST num_resources: 0 [ 2.654474] [THERMAL EST subdev 0] [ 2.658055] [THERMAL EST subdev 1] [ 2.661208] [THERMAL EST subdev 2] [ 2.664695] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.671166] THERMAL EST: thz register success. [ 2.675412] THERMAL EST: end of probe, return err: 0 [ 2.680522] nvsciipc: loaded module [ 2.687563] tun: Universal TUN/TAP device driver, 1.6 [ 2.690447] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.696226] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.702040] e1000e: Intel(R) PRO/1000 Network Driver [ 2.706708] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.713072] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.718345] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.724632] PPP generic driver version 2.4.2 [ 2.728547] PPP BSD Compression module registered [ 2.733059] PPP Deflate Compression module registered [ 2.738305] PPP MPPE Compression module registered [ 2.743575] usbcore: registered new interface driver r8152 [ 2.748830] usbcore: registered new interface driver asix [ 2.754445] usbcore: registered new interface driver ax88179_178a [ 2.760308] usbcore: registered new interface driver cdc_ether [ 2.766524] usbcore: registered new interface driver net1080 [ 2.772115] usbcore: registered new interface driver cdc_subset [ 2.777920] usbcore: registered new interface driver zaurus [ 2.783605] usbcore: registered new interface driver cdc_ncm [ 2.789326] usbcore: registered new interface driver aqc111 [ 2.794880] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.801228] ohci-pci: OHCI PCI platform driver [ 2.805294] ohci-platform: OHCI generic platform driver [ 2.811119] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.817727] usbcore: registered new interface driver uas [ 2.821554] usbcore: registered new interface driver usb-storage [ 2.827982] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.833745] mousedev: PS/2 mouse device common for all mice [ 2.838709] usbcore: registered new interface driver xpad [ 2.846776] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.849495] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.857250] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.863740] i2c /dev entries driver [ 2.867417] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.873427] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.878485] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.883808] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.889336] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.894753] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.900153] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.913445] device-mapper: uevent: version 1.0.3 [ 2.913909] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.920858] cpuidle: Initializing cpuidle driver [ 2.924764] sdhci: Secure Digital Host Controller Interface driver [ 2.929326] sdhci: Copyright(c) Pierre Ossman [ 2.933165] Synopsys Designware Multimedia Card Interface Driver [ 2.939603] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.945552] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.946339] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.958925] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.980812] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.990537] vdd-1v0: supplied by regulator-dummy [ 2.996115] vdd-1v8-hs: supplied by regulator-dummy [ 3.000914] vdd-1v8-ls: supplied by regulator-dummy [ 3.005861] vdd-1v8-ao: supplied by regulator-dummy [ 3.009789] vddio-ddr-1v1: supplied by regulator-dummy [ 3.014380] vdd-rtc: supplied by regulator-dummy [ 3.016145] spmic-ldo1: supplied by regulator-dummy [ 3.017359] vdd-ao-3v3: supplied by regulator-dummy [ 3.023567] vddio-emmc-3v3: supplied by regulator-dummy [ 3.029908] spmic-ldo4: supplied by regulator-dummy [ 3.031201] vdd-usb-3v3: supplied by regulator-dummy [ 3.037380] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.043605] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.049207] spmic-ldo8: supplied by vdd-1v8-ls [ 3.050707] gpio-510 (gpio_default): hogged as output/high [ 3.052104] gpio-511 (gpio_default): hogged as output/high [ 3.054999] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.191794] max77686-rtc max77620-rtc: registered as rtc0 [ 3.193143] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.193514] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.890244] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.891187] hid: raw HID events driver (C) Jiri Kosina [ 3.891844] usbcore: registered new interface driver usbhid [ 3.891991] usbhid: USB HID core driver [ 3.893751] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.894939] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.873749] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.949279] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.340 ms) ÿá[ 3.980263] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.980898] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.982060] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.982979] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.984820] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.985603] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.986328] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.987816] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.988173] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.990269] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.996990] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.003289] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.008155] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.015267] denver_knobs_init:MTS_VERSION:55637613 [ 4.026776] t19x_cache tegra-cache: probed [ 4.031161] optee: probing for conduit method. [ 4.031997] optee: revision 3.16 (65cc2218) [ 4.033026] optee: dynamic shared memory is enabled [ 4.035273] optee: initialized driver [ 4.041694] nvpmodel: initialized successfully [ 4.042583] tegra_hv: get_hvd: not initialized yet [ 4.047269] user_ivc_mempool: hypervisor not present [ 4.053593] usbcore: registered new interface driver snd-usb-audio [ 4.059758] u32 classifier [ 4.061015] input device check on [ 4.065011] Actions configured [ 4.068499] Initializing XFRM netlink socket [ 4.073252] NET: Registered protocol family 10 [ 4.080233] Segment Routing with IPv6 [ 4.080891] NET: Registered protocol family 17 [ 4.084985] NET: Registered protocol family 15 [ 4.089620] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.103113] Bluetooth: RFCOMM socket layer initialized [ 4.107697] Bluetooth: RFCOMM ver 1.11 [ 4.111495] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.117592] Bluetooth: HIDP socket layer initialized [ 4.123189] 9pnet: Installing 9P2000 support [ 4.127049] Key type dns_resolver registered [ 4.132446] registered taskstats version 1 [ 4.135248] Loading compiled-in X.509 certificates [ 4.149331] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.151229] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.161338] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.163116] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.171965] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.180063] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.297178] tegra194-pcie 14160000.pcie: Link up [ 4.300112] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.300321] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.300470] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.300685] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.300887] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.301358] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.301836] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.314704] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.315315] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.315789] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.317576] pci 0004:01:00.0: supports D1 D2 [ 4.317716] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.328580] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.328893] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.329305] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.329788] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.330063] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.330294] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.331982] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.339459] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.347665] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.357825] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.362330] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.367978] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.374969] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.384802] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.385707] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.394334] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.402593] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.517959] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.518606] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.518789] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.518923] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.519232] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.519483] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.519873] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.520353] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.540548] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.540927] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.542832] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.543916] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.545357] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.547051] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.547937] pci 0005:00:00.0: Removing from iommu group 7 [ 5.548388] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.580176] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.601285] host1x 13e10000.host1x: initialized [ 5.602624] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.603489] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.604632] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.605422] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.606504] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.607079] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.608206] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.608821] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.611001] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.618085] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.627879] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.635391] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.645180] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.652008] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.662181] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.669195] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.678970] falcon 15340000.vic: Adding to iommu group 17 [ 5.693671] falcon 15340000.vic: initialized [ 5.694633] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.699911] falcon 15380000.nvjpg: initialized [ 5.700482] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.711065] falcon 154c0000.nvenc: initialized [ 5.711646] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.721889] falcon 15a80000.nvenc1: initialized [ 5.722655] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.733898] nvdec 15480000.nvdec: initialized [ 5.734675] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.743705] nvdec 15140000.nvdec1: initialized [ 5.744258] tsec 15500000.tsec: Adding to iommu group 18 [ 5.749694] tsec 15500000.tsec: initialized [ 5.750102] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.758584] tsec 15100000.tsecb: initialized [ 5.762673] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.787482] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.799642] gpio-374 (wifi-enable): hogged as output/high [ 5.799955] gpio-431 (camera-control-output-low): hogged as output/low [ 5.800266] gpio-432 (camera-control-output-low): hogged as output/low [ 5.801802] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.803707] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.804246] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.810494] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.815898] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.821181] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.827461] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.835110] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.842735] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.853856] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.859242] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.865258] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.874151] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.883384] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.890408] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.898167] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.904135] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.914077] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.920011] pva 16000000.pva0: Adding to iommu group 22 [ 5.946454] pva 16000000.pva0: initialized [ 5.951774] pva 16800000.pva1: Adding to iommu group 23 [ 5.962515] pva 16800000.pva1: initialized [ 5.966644] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.979380] nvdla 15880000.nvdla0: initialized [ 5.980635] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.996976] nvdla 158c0000.nvdla1: initialized [ 5.999371] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.999660] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.999992] tegradccommon 15200000.display-hub: dma mapping done [ 6.002072] tegradc 15200000.display: Adding to iommu group 26 [ 6.009550] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.009985] generic_infoframe_type: 0x87 [ 6.010238] tegradc 15200000.display: DT parsed successfully [ 6.010532] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.013820] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.014149] tegradc 15210000.display: Adding to iommu group 26 [ 6.016648] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.016655] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.031554] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.039449] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.045264] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.052965] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.065435] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.065487] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.071793] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.086854] tegra_cec 3960000.tegra_cec: probed [ 6.091929] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.098042] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.098481] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.105448] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.118021] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.118134] kfuse 3830000.kfuse: initialized [ 6.126582] tegradc 15210000.display: disp0 connected to head1->sor [ 6.129709] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.135219] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.141163] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.141945] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.148898] tegradc 15210000.display: DT parsed successfully [ 6.156073] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.160726] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.185235] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.190107] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.198791] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.204339] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.223579] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.223967] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.227971] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.236214] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.244541] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.251270] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.259062] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.266273] usb usb1: Product: xHCI Host Controller [ 6.270994] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.277262] usb usb1: SerialNumber: 3610000.xhci [ 6.282854] hub 1-0:1.0: USB hub found [ 6.286121] hub 1-0:1.0: 4 ports detected [ 6.290710] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.295491] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.302828] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.310587] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.318688] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.325979] usb usb2: Product: xHCI Host Controller [ 6.330625] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.336834] usb usb2: SerialNumber: 3610000.xhci [ 6.342651] hub 2-0:1.0: USB hub found [ 6.345762] hub 2-0:1.0: 4 ports detected [ 6.385655] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.391540] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.393217] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.393441] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.406566] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.407568] tegra194-cpufreq ccplex: probed with BWMGR [ 6.408879] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.409571] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.410084] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.411353] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.420830] mmc0: CQHCI version 5.10 [ 6.422719] tegra194-vi5 15c10000.vi: initialized [ 6.424411] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.425709] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.429456] generic_infoframe_type: 0x87 [ 6.435635] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.439646] tegradc 15200000.display: DT parsed successfully [ 6.447685] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.447694] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.447699] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.447709] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.453301] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.488115] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.488793] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.493750] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.501782] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.508846] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.514362] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.516853] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.540501] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.541099] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.545783] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.545989] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.557108] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.560645] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.569682] nvethernet 2490000.ethernet: Macsec not supported [ 6.589874] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.598495] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.608840] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.610112] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.610328] ************************************** [ 6.610335] CPU:0, Error:cbb-noc [ 6.615812] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.620739] Error Logger : 0 [ 6.620749] ErrLog0 : 0x80030000 [ 6.620753] Transaction Type : RD - Read, Incrementing [ 6.620757] Error Code : SLV [ 6.620764] Error Source : Target [ 6.624017] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.631416] Error Description : Target error detected by CBB slave [ 6.631426] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.631439] Packet header Lock : 0 [ 6.635631] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.637895] Packet header Len1 : 3 [ 6.637899] NOC protocol version : version >= 2.7 [ 6.637903] ErrLog1 : 0x352420 [ 6.637925] ErrLog2 : 0x0 [ 6.695732] RouteId : 0x352420 [ 6.699314] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.703958] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.709027] TargSubRange : 18 [ 6.712440] SeqId : 0 [ 6.714913] ErrLog3 : 0x4045c [ 6.718565] ErrLog4 : 0x0 [ 6.721195] Address accessed : 0x15b4045c [ 6.725827] ErrLog5 : 0x809f851 [ 6.728981] Non-Modify : 0x1 [ 6.732565] AXI ID : 0x10 [ 6.735731] Master ID : CCPLEX [ 6.738869] Security Group(GRPSEC): 0x7e [ 6.743070] Cache : 0x1 -- Bufferable [ 6.747353] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.754178] FALCONSEC : 0x0 [ 6.757326] Virtual Queuing Channel(VQC): 0x0 [ 6.761965] ************************************** [ 6.766749] ------------[ cut here ]------------ [ 6.771246] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.778066] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.783059] Modules linked in: [ 6.786293] CPU: 0 PID: 7 Comm: kworker/u12:0 Not tainted 5.10.104-tegra #1 [ 6.792943] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.805212] Workqueue: events_unbound async_run_entry_fn [ 6.810713] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.817006] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 6.821489] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 6.826452] sp : ffff800010003b30 [ 6.829786] x29: ffff800010003b30 x28: 0000000000000001 [ 6.834948] x27: 0000000000000005 x26: ffffb1f328963f58 [ 6.840631] x25: ffffb1f3292bce10 x24: 0000000000000001 [ 6.845969] x23: ffffb1f328c57000 x22: ffffb1f3290dea00 [ 6.851480] x21: 000000000000000f x20: ffff43d640ea5080 [ 6.856906] x19: ffffb1f3290dea00 x18: 0000000000000010 [ 6.862345] x17: ffffb1f328a0d008 x16: 00000000f15f4d80 [ 6.867844] x15: ffff43d640165c70 x14: 0720072007200720 [ 6.873113] x13: 0720072007200720 x12: 0720072007200720 [ 6.878699] x11: 0720072007200720 x10: 0720072007200720 [ 6.884208] x9 : 0720072007200720 x8 : 07200720072a072a [ 6.889716] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 6.895229] x5 : 0000000000057fa8 x4 : ffffb1f328f67968 [ 6.900654] x3 : 00000000ffffffff x2 : ffffb1f3273fe090 [ 6.905990] x1 : ffff43d640165700 x0 : 0000000100010100 [ 6.911069] Call trace: [ 6.913543] tegra194_cbb_err_isr+0x190/0x1b0 [ 6.918071] __handle_irq_event_percpu+0x68/0x2a0 [ 6.922618] handle_irq_event_percpu+0x40/0xa0 [ 6.927080] handle_irq_event+0x50/0xf0 [ 6.930841] handle_fasteoi_irq+0xc0/0x170 [ 6.934610] generic_handle_irq+0x40/0x60 [ 6.938634] __handle_domain_irq+0x70/0xd0 [ 6.943092] efi_header_end+0xb0/0xf0 [ 6.946351] el1_irq+0xd0/0x180 [ 6.949566] __do_softirq+0xb4/0x3e8 [ 6.952985] irq_exit+0xc0/0xe0 [ 6.955959] __handle_domain_irq+0x74/0xd0 [ 6.960241] efi_header_end+0xb0/0xf0 [ 6.963917] el1_irq+0xd0/0x180 [ 6.966636] tegra_hda_get_dev_id+0x6c/0x2b0 [ 6.971196] tegra_hda_init+0x234/0x440 [ 6.975117] tegra_dc_hdmi_init+0x820/0xb50 [ 6.978711] tegra_dc_set_out+0x2cc/0x480 [ 6.982822] tegra_dc_probe+0xa90/0x1570 [ 6.986760] platform_drv_probe+0x5c/0xb0 [ 6.991223] really_probe+0xf8/0x3d0 [ 6.994652] driver_probe_device+0x60/0xc0 [ 6.999003] __device_attach_driver+0x8c/0xd0 [ 7.003396] bus_for_each_drv+0x8c/0xe0 [ 7.007143] __device_attach_async_helper+0xc4/0xf0 [ 7.012061] async_run_entry_fn+0x4c/0x150 [ 7.016244] process_one_work+0x1c4/0x4a0 [ 7.020098] worker_thread+0x54/0x430 [ 7.023773] kthread+0x148/0x170 [ 7.027356] ret_from_fork+0x10/0x24 [ 7.031054] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.036903] ---[ end trace 2978bd81bc08ef56 ]--- [ 7.041791] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.049248] SMP: stopping secondary CPUs [ 7.053185] Kernel Offset: 0x31f317240000 from 0xffff800010000000 [ 7.059032] PHYS_OFFSET: 0xffffbc2ac0000000 [ 7.063148] CPU features: 0x8240002,03802a30 [ 7.067518] Memory Limit: none [ 7.070586] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.305] I> sdmmc DDR50 mode [0001.323] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.340] W> Cannot find any partition table for 00000003 [0001.341] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.358] I> Active Boot chain : 0 [0002.029] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.481] I> register 'maxim' power off handle [0003.483] I> virtual i2c enabled [0003.483] I> registered 'maxim,max20024' pmic [0003.484] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.486] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.569] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.588] I> regulator 'vdd-hdmi-5v0' already enabled [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.594] I> hdmi cable connected [0003.599] W> set volts not configured for 'vdd-1v0' [0003.605] W> set volts not configured for 'vdd-1v8-hs' [0003.605] I> retrieved tmds range from prod_list_hdmi_soc [0003.610] E> invalid display type [0003.611] E> cannot find any other nvdisp nodes [0003.627] I> edid read success [0003.640] I> edid read success [0003.640] I> width = 640, height = 480, frequency = 25174825 [0003.640] I> width = 1920, height = 1080, frequency = 148500000 [0003.641] I> width = 1280, height = 768, frequency = 79500000 [0003.641] I> width = 1360, height = 768, frequency = 85500000 [0003.642] I> width = 720, height = 480, frequency = 26973026 [0003.646] I> width = 720, height = 576, frequency = 26973026 [0003.651] I> width = 1280, height = 720, frequency = 74175824 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1920, height = 1080, frequency = 148351648 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 720, height = 480, frequency = 26973026 [0003.679] I> width = 720, height = 576, frequency = 26973026 [0003.685] I> width = 3840, height = 2160, frequency = 296703296 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 4096, height = 2160, frequency = 296703296 [0003.714] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.725] I> hdmi_enable, starting HDMI initialisation [0003.730] I> hdmi_enable, HDMI initialisation complete [0003.739] initializing target [0003.740] calling apps_init() [0003.741] starting app kernel_boot_app [0003.742] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000720] Console: colour dummy device 80x25 [ 0.002156] printk: console [tty0] enabled [ 0.002217] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002254] pid_max: default: 32768 minimum: 301 [ 0.002424] LSM: Security Framework initializing [ 0.002491] Yama: becoming mindful. [ 0.002536] SELinux: Initializing. [ 0.002686] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002730] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005653] rcu: Hierarchical SRCU implementation. [ 0.005933] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006854] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006904] DTB Build time: Aug 10 2022 20:31:49 [ 0.009819] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010108] Remapping and enabling EFI services. [ 0.012200] smp: Bringing up secondary CPUs ... [ 0.041405] Detected PIPT I-cache on CPU1 [ 0.041501] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075637] Detected PIPT I-cache on CPU2 [ 0.075786] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105409] Detected PIPT I-cache on CPU3 [ 0.105546] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135254] Detected PIPT I-cache on CPU4 [ 0.135352] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165232] Detected PIPT I-cache on CPU5 [ 0.165338] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165667] smp: Brought up 1 node, 6 CPUs [ 0.165822] SMP: Total of 6 processors activated. [ 0.165907] CPU features: detected: Privileged Access Never [ 0.165931] CPU features: detected: LSE atomic instructions [ 0.165944] CPU features: detected: User Access Override [ 0.165957] CPU features: detected: 32-bit EL0 Support [ 0.165970] CPU features: detected: RAS Extension Support [ 0.165982] CPU features: detected: CRC32 instructions [ 0.165996] CPU features: detected: 32-bit EL1 Support [ 0.238287] CPU: All CPU(s) started at EL2 [ 0.246751] devtmpfs: initialized [ 0.295822] Registered cp15_barrier emulation handler [ 0.295968] Registered setend emulation handler [ 0.296011] KASLR enabled [ 0.296278] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.296305] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.297728] pinctrl core: initialized pinctrl subsystem [ 0.298745] SMBIOS 3.0.0 present. [ 0.298774] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.299356] NET: Registered protocol family 16 [ 0.301326] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.301846] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.302542] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.302601] audit: initializing netlink subsys (disabled) [ 0.302865] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.303372] thermal_sys: Registered thermal governor 'step_wise' [ 0.303379] thermal_sys: Registered thermal governor 'power_allocator' [ 0.303393] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.305779] cpuidle: using governor menu [ 0.306046] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.306460] ASID allocator initialised with 32768 entries [ 0.306692] Serial: AMBA PL011 UART driver [ 0.310205] Tegra reboot handler registered. [ 0.384485] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.384616] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.384801] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.384868] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.385024] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.385071] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.385197] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.385242] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.385360] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.385421] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.387882] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.387942] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.387972] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.388002] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.388032] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.388061] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.388100] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.388133] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.388160] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.388186] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.388212] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.388248] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.388274] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.388299] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.388345] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.388370] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.388398] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.388553] mc-err: mcerr ops are set to t19x [ 0.401354] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.401383] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.401395] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.401407] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.408298] ACPI: Interpreter disabled. [ 0.409570] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.410933] iommu: Default domain type: Translated [ 0.411003] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.411372] SCSI subsystem initialized [ 0.411549] usbcore: registered new interface driver usbfs [ 0.411595] usbcore: registered new interface driver hub [ 0.411651] usbcore: registered new device driver usb [ 0.412097] mc: Linux media interface: v0.10 [ 0.412127] videodev: Linux video capture interface: v2.00 [ 0.412499] pps_core: LinuxPPS API ver. 1 registered [ 0.412512] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.412556] PTP clock support registered [ 0.412787] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.413093] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.413175] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.413827] Registered efivars operations [ 0.419639] FPGA manager framework [ 0.419752] Advanced Linux Sound Architecture Driver Initialized. [ 0.420342] Bluetooth: Core ver 2.22 [ 0.420385] NET: Registered protocol family 31 [ 0.420397] Bluetooth: HCI device and connection manager initialized [ 0.420412] Bluetooth: HCI socket layer initialized [ 0.420427] Bluetooth: L2CAP socket layer initialized [ 0.420448] Bluetooth: SCO socket layer initialized [ 0.422071] camchar: rtcpu character device driver loaded [ 0.422810] clocksource: Switched to clocksource arch_sys_counter [ 0.779740] VFS: Disk quotas dquot_6.6.0 [ 0.779806] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.780171] pnp: PnP ACPI: disabled [ 0.790877] la/ptsa driver initialized. [ 0.790986] NET: Registered protocol family 2 [ 0.791163] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.796220] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.796287] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.796649] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.797079] TCP: Hash tables configured (established 65536 bind 65536) [ 0.797204] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.797315] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.797512] NET: Registered protocol family 1 [ 0.798285] RPC: Registered named UNIX socket transport module. [ 0.798319] RPC: Registered udp transport module. [ 0.798335] RPC: Registered tcp transport module. [ 0.798350] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.798391] PCI: CLS 0 bytes, default 64 [ 0.798753] Trying to unpack rootfs image as initramfs... [ 1.063543] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.066671] Freeing initrd memory: 8196K [ 1.071968] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.072007] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.072048] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.072428] kvm [1]: IPA Size Limit: 40 bits [ 1.072992] kvm [1]: vgic interrupt IRQ9 [ 1.073504] kvm [1]: VHE mode initialized successfully [ 1.075322] Initialise system trusted keyrings [ 1.075644] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.084295] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.085413] NFS: Registering the id_resolver key type [ 1.085455] Key type id_resolver registered [ 1.085470] Key type id_legacy registered [ 1.085566] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.085590] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.085634] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.095712] NET: Registered protocol family 38 [ 1.095738] Key type asymmetric registered [ 1.095785] Asymmetric key parser 'x509' registered [ 1.095839] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.096176] io scheduler mq-deadline registered [ 1.096196] io scheduler kyber registered [ 1.102312] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.105320] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.105401] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.105483] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.105556] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.105627] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.110974] scrncapt: init (heads:4 wins:6 planes:4) [ 1.111119] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.112079] EINJ: ACPI disabled. [ 1.115240] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.115264] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.115311] tegra-pmc: ### PMC reset level: L1 [ 1.115325] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.115371] tegra-pmc: PMC Prod config success [ 1.121553] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.153522] random: fast init done [ 1.161204] printk: console [ttyTCU0] enabled [ 2.679101] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.683416] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.688204] arm-smmu 10000000.iommu: stage 1 translation [ 2.693459] arm-smmu 10000000.iommu: stage 2 translation [ 2.698981] arm-smmu 10000000.iommu: nested translation [ 2.704308] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.711740] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.721456] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.724900] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.731706] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.739296] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.744489] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.749204] arm-smmu 12000000.iommu: stage 1 translation [ 2.754707] arm-smmu 12000000.iommu: stage 2 translation [ 2.760397] arm-smmu 12000000.iommu: nested translation [ 2.765559] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.772759] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.782476] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.786143] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.792424] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.799737] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.810068] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.813113] tegra_profiler: auth: init [ 2.817307] THERMAL EST: found 3 subdevs [ 2.820796] THERMAL EST num_resources: 0 [ 2.824370] [THERMAL EST subdev 0] [ 2.827948] [THERMAL EST subdev 1] [ 2.831094] [THERMAL EST subdev 2] [ 2.834576] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.841016] THERMAL EST: thz register success. [ 2.845304] THERMAL EST: end of probe, return err: 0 [ 2.850610] nvsciipc: loaded module [ 2.857480] tun: Universal TUN/TAP device driver, 1.6 [ 2.859845] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.866384] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.871963] e1000e: Intel(R) PRO/1000 Network Driver [ 2.876590] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.882688] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.888232] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.894138] PPP generic driver version 2.4.2 [ 2.898448] PPP BSD Compression module registered [ 2.903200] PPP Deflate Compression module registered [ 2.908178] PPP MPPE Compression module registered [ 2.913210] usbcore: registered new interface driver r8152 [ 2.918719] usbcore: registered new interface driver asix [ 2.924052] usbcore: registered new interface driver ax88179_178a [ 2.930163] usbcore: registered new interface driver cdc_ether [ 2.936374] usbcore: registered new interface driver net1080 [ 2.941714] usbcore: registered new interface driver cdc_subset [ 2.948010] usbcore: registered new interface driver zaurus [ 2.953714] usbcore: registered new interface driver cdc_ncm [ 2.959396] usbcore: registered new interface driver aqc111 [ 2.964764] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.971125] ohci-pci: OHCI PCI platform driver [ 2.975139] ohci-platform: OHCI generic platform driver [ 2.980884] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.987591] usbcore: registered new interface driver uas [ 2.991741] usbcore: registered new interface driver usb-storage [ 2.997634] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.003963] mousedev: PS/2 mouse device common for all mice [ 3.008862] usbcore: registered new interface driver xpad [ 3.016810] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.019626] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.027417] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.033980] i2c /dev entries driver [ 3.037297] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.042904] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.048530] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.053843] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.059193] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.064754] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.069858] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.084696] device-mapper: uevent: version 1.0.3 [ 3.085242] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.090291] cpuidle: Initializing cpuidle driver [ 3.094660] sdhci: Secure Digital Host Controller Interface driver [ 3.099201] sdhci: Copyright(c) Pierre Ossman [ 3.103040] Synopsys Designware Multimedia Card Interface Driver [ 3.109227] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.115167] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.121247] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.128529] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.150093] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.160066] vdd-1v0: supplied by regulator-dummy [ 3.165787] vdd-1v8-hs: supplied by regulator-dummy [ 3.170671] vdd-1v8-ls: supplied by regulator-dummy [ 3.175686] vdd-1v8-ao: supplied by regulator-dummy [ 3.179667] vddio-ddr-1v1: supplied by regulator-dummy [ 3.184282] vdd-rtc: supplied by regulator-dummy [ 3.186098] spmic-ldo1: supplied by regulator-dummy [ 3.187444] vdd-ao-3v3: supplied by regulator-dummy [ 3.193749] vddio-emmc-3v3: supplied by regulator-dummy [ 3.200232] spmic-ldo4: supplied by regulator-dummy [ 3.201573] vdd-usb-3v3: supplied by regulator-dummy [ 3.207842] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.214264] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.219873] spmic-ldo8: supplied by vdd-1v8-ls [ 3.221491] gpio-510 (gpio_default): hogged as output/high [ 3.222925] gpio-511 (gpio_default): hogged as output/high [ 3.225887] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.361806] max77686-rtc max77620-rtc: registered as rtc0 [ 3.363076] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.363484] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.206017] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.207337] hid: raw HID events driver (C) Jiri Kosina [ 4.208268] usbcore: registered new interface driver usbhid [ 4.208424] usbhid: USB HID core driver [ 4.210549] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.212040] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.295876] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.369631] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.564 ms) ÿá[ 4.295935] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.296502] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.297653] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.298354] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.299940] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.300469] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.301058] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.302540] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.302787] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.305838] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.312199] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.319034] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.324204] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.330159] denver_knobs_init:MTS_VERSION:55637613 [ 4.343234] t19x_cache tegra-cache: probed [ 4.346401] optee: probing for conduit method. [ 4.347493] optee: revision 3.16 (65cc2218) [ 4.348780] optee: dynamic shared memory is enabled [ 4.350924] optee: initialized driver [ 4.357794] nvpmodel: initialized successfully [ 4.358403] tegra_hv: get_hvd: not initialized yet [ 4.363171] user_ivc_mempool: hypervisor not present [ 4.369379] usbcore: registered new interface driver snd-usb-audio [ 4.375792] u32 classifier [ 4.377070] input device check on [ 4.380720] Actions configured [ 4.384250] Initializing XFRM netlink socket [ 4.389130] NET: Registered protocol family 10 [ 4.395295] Segment Routing with IPv6 [ 4.396412] NET: Registered protocol family 17 [ 4.400959] NET: Registered protocol family 15 [ 4.405274] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.419053] Bluetooth: RFCOMM socket layer initialized [ 4.423597] Bluetooth: RFCOMM ver 1.11 [ 4.427629] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.433433] Bluetooth: HIDP socket layer initialized [ 4.439265] 9pnet: Installing 9P2000 support [ 4.442794] Key type dns_resolver registered [ 4.448132] registered taskstats version 1 [ 4.451298] Loading compiled-in X.509 certificates [ 4.463306] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.466669] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.477334] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.479290] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.487538] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.495946] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.611094] tegra194-pcie 14160000.pcie: Link up [ 4.614168] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.614404] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.614554] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.614789] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.615082] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.615491] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.615909] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.626522] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.627270] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.627698] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.629265] pci 0004:01:00.0: supports D1 D2 [ 4.629434] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.638253] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.638644] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.639241] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.639627] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.639938] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.640155] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.646082] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.653406] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.661588] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.671997] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.676983] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.682317] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.689133] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.698052] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.699701] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.708268] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.716535] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.832017] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.832648] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.832942] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.833105] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.833352] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.833547] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.833962] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.834400] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.850104] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.850500] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.852563] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.853775] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.855515] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.857007] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.857855] pci 0005:00:00.0: Removing from iommu group 7 [ 5.858131] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.889726] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.914223] host1x 13e10000.host1x: initialized [ 5.916256] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.917204] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.918333] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.919374] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.920433] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.921006] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.922062] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.922593] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.925486] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.932288] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.942321] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.948988] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.958788] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.965839] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.976091] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.982938] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.992982] falcon 15340000.vic: Adding to iommu group 17 [ 6.007788] falcon 15340000.vic: initialized [ 6.008938] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.014715] falcon 15380000.nvjpg: initialized [ 6.015460] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.026168] falcon 154c0000.nvenc: initialized [ 6.027053] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.036002] falcon 15a80000.nvenc1: initialized [ 6.036740] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.048219] nvdec 15480000.nvdec: initialized [ 6.048991] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.057978] nvdec 15140000.nvdec1: initialized [ 6.058519] tsec 15500000.tsec: Adding to iommu group 18 [ 6.064387] tsec 15500000.tsec: initialized [ 6.064878] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.073323] tsec 15100000.tsecb: initialized [ 6.077572] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.101041] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.112819] gpio-374 (wifi-enable): hogged as output/high [ 6.113160] gpio-431 (camera-control-output-low): hogged as output/low [ 6.113460] gpio-432 (camera-control-output-low): hogged as output/low [ 6.115313] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.117305] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.117896] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.124376] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.129534] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.135783] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.140871] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.149367] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.156700] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.168718] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.173512] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.179047] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.187926] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.197362] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.204512] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.212233] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.218274] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.228277] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.234139] pva 16000000.pva0: Adding to iommu group 22 [ 6.260695] pva 16000000.pva0: initialized [ 6.265529] pva 16800000.pva1: Adding to iommu group 23 [ 6.277046] pva 16800000.pva1: initialized [ 6.281191] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.293397] nvdla 15880000.nvdla0: initialized [ 6.294783] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.303046] nvdla 158c0000.nvdla1: initialized [ 6.307078] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.307334] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.307382] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.307633] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.307940] tegradccommon 15200000.display-hub: dma mapping done [ 6.308025] tegradc 15200000.display: Adding to iommu group 26 [ 6.309250] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.316988] tegradc 15210000.display: Adding to iommu group 26 [ 6.317538] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.317775] generic_infoframe_type: 0x87 [ 6.318164] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.319046] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.319056] tegra_cec 3960000.tegra_cec: probed [ 6.320085] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.322726] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.323473] kfuse 3830000.kfuse: initialized [ 6.324154] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.330468] tegradc 15200000.display: DT parsed successfully [ 6.334016] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.335016] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.340384] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.346699] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.379371] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.388701] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.391934] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.391945] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.409090] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.418317] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.422659] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.445359] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.456023] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.477735] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.478251] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.493196] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.502508] tegradc 15210000.display: disp0 connected to head1->sor [ 6.506259] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.506329] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.515692] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.522993] tegradc 15210000.display: DT parsed successfully [ 6.528253] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.533860] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.550305] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.558981] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.565361] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.572754] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.580163] usb usb1: Product: xHCI Host Controller [ 6.584862] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.591166] usb usb1: SerialNumber: 3610000.xhci [ 6.597290] hub 1-0:1.0: USB hub found [ 6.599905] hub 1-0:1.0: 4 ports detected [ 6.604549] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.609411] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.617168] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.624945] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.632552] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.640042] usb usb2: Product: xHCI Host Controller [ 6.644714] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.650930] usb usb2: SerialNumber: 3610000.xhci [ 6.656759] hub 2-0:1.0: USB hub found [ 6.659914] hub 2-0:1.0: 4 ports detected [ 6.701598] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.707715] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.708927] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.709114] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.722384] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.723433] tegra194-cpufreq ccplex: probed with BWMGR [ 6.724748] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.725404] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.725894] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.727287] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.736382] tegra194-vi5 15c10000.vi: initialized [ 6.736619] mmc0: CQHCI version 5.10 [ 6.737969] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.738722] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.743251] generic_infoframe_type: 0x87 [ 6.743312] tegradc 15200000.display: DT parsed successfully [ 6.749711] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.753460] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.759198] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.768147] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.775238] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.775245] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.775249] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.782893] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.789852] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.796597] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.796605] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.837925] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.846386] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.852359] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.858662] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.858711] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.858720] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.858771] nvethernet 2490000.ethernet: Macsec not supported [ 6.865934] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.877588] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.878359] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.878364] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.886211] tegradc 15200000.display: probed [ 6.891303] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.930374] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.937755] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.945311] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.950947] Console: switching to colour frame buffer device 240x67 [ 6.956488] tegradc 15200000.display: fb registered [ 6.961513] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.968616] tegra-se-nvhost 15810000.se: initialized [ 6.968785] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.982637] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.983354] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.990760] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.997376] tegra-se-nvhost 15820000.se: initialized [ 6.998469] mmc0: Command Queue Engine enabled [ 7.003371] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.005978] mmc0: periodic cache flush enabled [ 7.012463] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.016466] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.023536] tegra-se-nvhost 15830000.se: initialized [ 7.029747] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.035248] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.038945] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.043162] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.044184] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.044192] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.044782] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.044786] Extcon AUX1(HDMI) enable [ 7.044915] tegradc 15210000.display: disp1 connected to head1->sor [ 7.045112] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.045514] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.046285] tegra-se-nvhost 15840000.se: initialized [ 7.047931] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.049612] tegra_actmon d230000.actmon: in actmon_register()... [ 7.049788] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.050172] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.050730] hvc_sysfs: hypervisor is not present [ 7.072399] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.077039] tegradc 15210000.display: DT parsed successfully [ 7.077753] ALSA device list: [ 7.077759] No soundcards found. [ 7.084188] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.087590] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.093975] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.182946] usb 1-2: Manufacturer: Generic [ 7.183327] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.191982] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.192917] hub 1-2:1.0: USB hub found [ 7.193406] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.200873] hub 1-2:1.0: 4 ports detected [ 7.220361] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.222716] tegradc 15210000.display: probed [ 7.227395] tegradc 15210000.display: fb registered ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.232514] tegradc 15200000.display: blank - powerdown [ 7.235777] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.235782] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.235789] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.237570] Freeing unused kernel memory: 3968K [ 7.247341] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.247347] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.247352] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.247356] usb 2-3: Manufacturer: Generic [ 7.257718] hub 2-3:1.0: USB hub found [ 7.259575] hub 2-3:1.0: 4 ports detected [ 7.267021] Run /init as init process [ 7.276894] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.276898] Extcon AUX1(HDMI) disable [ 7.300062] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.300883] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.314599] tegradc 15200000.display: unblank [ 7.315710] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.315908] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.321531] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.323382] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.326842] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.326846] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.327364] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.327368] Extcon AUX1(HDMI) enable [ 7.340130] tegradc 15200000.display: sync windows ret = 247 [ 7.354867] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.408955] tegradc 15210000.display: blank - powerdown [ 7.414099] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.414102] Extcon DP: HPD disabled [ 7.414106] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.414117] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.438938] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.446267] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.453464] Extcon HDMI: HPD enabled [ 7.456941] tegradc 15200000.display: hdmi: plugged [ 7.474164] Root device found: mmcblk0p1 [ 7.477764] Found dev node: /dev/mmcblk0p1 [ 7.514708] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.520164] Rootfs mounted over mmcblk0p1 [ 7.551853] Switching from initrd to actual rootfs [ 7.560086] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.561494] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.562844] usb 1-3: Product: Bluetooth Radio [ 7.564105] usb 1-3: Manufacturer: Realtek [ 7.565355] usb 1-3: SerialNumber: 00e04c000001 [ 7.724034] systemd[1]: System time before build time, advancing clock. [ 7.797363] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.802258] systemd[1]: Detected architecture arm64. [ 7.842184] systemd[1]: Set hostname to . [ 8.003968] systemd-sysv-generator[245]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.258687] random: crng init done [ 8.358756] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.360553] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.366219] systemd[1]: Created slice system-modprobe.slice. [ 8.371068] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.375223] systemd[1]: Created slice User and Session Slice. [ 8.378574] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.382676] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.386083] systemd[1]: Reached target User and Group Name Lookups. [ 8.389212] systemd[1]: Reached target Slices. [ 8.392288] systemd[1]: Reached target Swap. [ 8.396254] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.399970] systemd[1]: Listening on Syslog Socket. [ 8.403477] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.406864] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.411104] systemd[1]: Listening on Journal Audit Socket. [ 8.414735] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.419889] systemd[1]: Listening on Journal Socket. [ 8.425252] systemd[1]: Listening on udev Control Socket. [ 8.428931] systemd[1]: Listening on udev Kernel Socket. [ 8.437325] systemd[1]: Mounting Huge Pages File System... [ 8.445729] systemd[1]: Mounting POSIX Message Queue File System... [ 8.453813] systemd[1]: Mounting RPC Pipe File System... [ 8.462497] systemd[1]: Mounting Kernel Debug File System... [ 8.471403] systemd[1]: Mounting Kernel Trace File System... [ 8.481679] systemd[1]: Starting Journal Service... [ 8.490797] systemd[1]: Starting Set the console keyboard layout... [ 8.499228] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.502704] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.509309] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.517784] systemd[1]: Started Nameserver information manager. [ 8.522705] systemd[1]: Reached target Network (Pre). [ 8.529984] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.532017] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.539267] systemd[1]: Starting Load Kernel Modules... [ 8.547539] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.555758] systemd[1]: Starting udev Coldplug all Devices... [ 8.568278] systemd[1]: Mounted Huge Pages File System. [ 8.572095] systemd[1]: Mounted POSIX Message Queue File System. [ 8.576026] systemd[1]: Mounted RPC Pipe File System. [ 8.579474] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.580680] systemd[1]: Mounted Kernel Debug File System. [ 8.581996] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.585250] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.585257] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.585268] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.585273] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.585524] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.585693] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.594602] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.596219] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.598073] systemd[1]: Mounted Kernel Trace File System. [ 8.606660] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.613661] systemd[1]: nvfb-udev.service: Succeeded. [ 8.619115] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.630729] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.636515] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.638270] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.653308] systemd[1]: Starting Load/Save Random Seed... [ 8.661275] systemd[1]: Starting Create System Users... [ 8.694769] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.694769] [ 8.718135] systemd[1]: Finished Load/Save Random Seed. [ 8.727978] systemd[1]: Finished Load Kernel Modules. [ 8.734638] systemd[1]: Finished Create System Users. [ 8.739074] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.745960] systemd[1]: Mounting Kernel Configuration File System... [ 8.755133] systemd[1]: Started OP-TEE Client Supplicant. [ 8.763513] systemd[1]: Starting Apply Kernel Variables... [ 8.771361] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.782545] systemd[1]: Finished Set the console keyboard layout. [ 8.789814] systemd[1]: Mounted Kernel Configuration File System. [ 10.103413] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.109825] imx219 9-0010: board setup failed [ 10.111193] imx219: probe of 9-0010 failed with error -121 [ 10.124694] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.131161] imx219 10-0010: board setup failed [ 10.132498] imx219: probe of 10-0010 failed with error -121 [ 10.225371] hot-surface-alert cooling state: 0 -> 1 [ 10.572722] using random self ethernet address [ 10.572728] using random host ethernet address [ 11.778112] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.780218] Creating 1 MTD partitions on "spi6.0": [ 11.780228] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.351431] using random self ethernet address [ 12.353807] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.829387] nvidia: loading out-of-tree module taints kernel. [ 59.189227] watchdog: watchdog0: watchdog did not stop! [ 59.656313] Trying to unregister non-registered hwtime source [ 62.715629] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.717696] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.045] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.086] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized noc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 202ÿâavfs_clk_platform_post initialized ÿä2 aÿâcvc_late initialized regulator_post initialized ÿäarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.612] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.619] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.650] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.750] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000025] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000747] Console: colour dummy device 80x25 [ 0.002223] printk: console [tty0] enabled [ 0.002286] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002322] pid_max: default: 32768 minimum: 301 [ 0.002488] LSM: Security Framework initializing [ 0.002545] Yama: becoming mindful. [ 0.002596] SELinux: Initializing. [ 0.002751] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002790] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006252] rcu: Hierarchical SRCU implementation. [ 0.006544] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007233] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007284] DTB Build time: Aug 10 2022 20:31:49 [ 0.009994] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010272] Remapping and enabling EFI services. [ 0.012385] smp: Bringing up secondary CPUs ... [ 0.041765] Detected PIPT I-cache on CPU1 [ 0.041845] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071678] Detected PIPT I-cache on CPU2 [ 0.071780] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101387] Detected PIPT I-cache on CPU3 [ 0.101480] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131089] Detected PIPT I-cache on CPU4 [ 0.131301] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160905] Detected PIPT I-cache on CPU5 [ 0.160976] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161358] smp: Brought up 1 node, 6 CPUs [ 0.161667] SMP: Total of 6 processors activated. [ 0.161719] CPU features: detected: Privileged Access Never [ 0.161752] CPU features: detected: LSE atomic instructions [ 0.161776] CPU features: detected: User Access Override [ 0.161799] CPU features: detected: 32-bit EL0 Support [ 0.161822] CPU features: detected: RAS Extension Support [ 0.161846] CPU features: detected: CRC32 instructions [ 0.161868] CPU features: detected: 32-bit EL1 Support [ 0.230272] CPU: All CPU(s) started at EL2 [ 0.236332] devtmpfs: initialized [ 0.284070] Registered cp15_barrier emulation handler [ 0.284206] Registered setend emulation handler [ 0.284228] KASLR enabled [ 0.284491] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.284516] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.285925] pinctrl core: initialized pinctrl subsystem [ 0.286818] SMBIOS 3.0.0 present. [ 0.286869] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.287474] NET: Registered protocol family 16 [ 0.289381] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.289924] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.290653] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.290721] audit: initializing netlink subsys (disabled) [ 0.290958] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.291360] thermal_sys: Registered thermal governor 'step_wise' [ 0.291366] thermal_sys: Registered thermal governor 'power_allocator' [ 0.291404] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.293450] cpuidle: using governor menu [ 0.293747] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.294184] ASID allocator initialised with 32768 entries [ 0.294420] Serial: AMBA PL011 UART driver [ 0.297501] Tegra reboot handler registered. [ 0.364559] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.364802] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.365004] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.365049] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.365184] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.365230] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.365362] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.365405] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.365576] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.365620] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.368133] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.368200] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.368231] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.368275] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.368309] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.368337] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.368391] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.368424] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.368450] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.368477] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.368501] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.368526] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.368550] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.368575] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.368600] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.368624] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.368657] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.368752] mc-err: mcerr ops are set to t19x [ 0.380713] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.380738] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.380752] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.380782] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.388885] ACPI: Interpreter disabled. [ 0.390600] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.392338] iommu: Default domain type: Translated [ 0.392454] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.392981] SCSI subsystem initialized [ 0.393217] usbcore: registered new interface driver usbfs [ 0.393304] usbcore: registered new interface driver hub [ 0.393356] usbcore: registered new device driver usb [ 0.393892] mc: Linux media interface: v0.10 [ 0.393937] videodev: Linux video capture interface: v2.00 [ 0.394402] pps_core: LinuxPPS API ver. 1 registered [ 0.394429] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.394485] PTP clock support registered [ 0.394778] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.395233] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.395331] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.396350] Registered efivars operations [ 0.404020] FPGA manager framework [ 0.404167] Advanced Linux Sound Architecture Driver Initialized. [ 0.405000] Bluetooth: Core ver 2.22 [ 0.405057] NET: Registered protocol family 31 [ 0.405075] Bluetooth: HCI device and connection manager initialized [ 0.405098] Bluetooth: HCI socket layer initialized [ 0.405117] Bluetooth: L2CAP socket layer initialized [ 0.405153] Bluetooth: SCO socket layer initialized [ 0.407020] camchar: rtcpu character device driver loaded [ 0.407852] clocksource: Switched to clocksource arch_sys_counter [ 0.809640] VFS: Disk quotas dquot_6.6.0 [ 0.809760] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.810145] pnp: PnP ACPI: disabled [ 0.823144] la/ptsa driver initialized. [ 0.823322] NET: Registered protocol family 2 [ 0.823548] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.831576] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.831670] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.832073] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.832715] TCP: Hash tables configured (established 65536 bind 65536) [ 0.832892] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.833021] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.833319] NET: Registered protocol family 1 [ 0.834352] RPC: Registered named UNIX socket transport module. [ 0.834382] RPC: Registered udp transport module. [ 0.834397] RPC: Registered tcp transport module. [ 0.834417] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.834441] PCI: CLS 0 bytes, default 64 [ 0.834727] Trying to unpack rootfs image as initramfs... [ 1.096585] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.099684] Freeing initrd memory: 8196K [ 1.103458] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.103493] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.103530] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.103950] kvm [1]: IPA Size Limit: 40 bits [ 1.104383] kvm [1]: vgic interrupt IRQ9 [ 1.104868] kvm [1]: VHE mode initialized successfully [ 1.106146] Initialise system trusted keyrings [ 1.106411] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.112198] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.112948] NFS: Registering the id_resolver key type [ 1.112984] Key type id_resolver registered [ 1.112999] Key type id_legacy registered [ 1.113108] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.113132] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.113173] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.122879] NET: Registered protocol family 38 [ 1.122904] Key type asymmetric registered [ 1.122920] Asymmetric key parser 'x509' registered [ 1.122974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.123203] io scheduler mq-deadline registered [ 1.123221] io scheduler kyber registered [ 1.128862] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.131751] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.131904] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.132019] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.132091] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.132162] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.137508] scrncapt: init (heads:4 wins:6 planes:4) [ 1.137639] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.138672] EINJ: ACPI disabled. [ 1.142401] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.142430] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.142446] tegra-pmc: ### PMC reset level: L1 [ 1.142460] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.142510] tegra-pmc: PMC Prod config success [ 1.147838] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.153197] random: fast init done [ 1.153999] printk: console [ttyTCU0] enabled [ 2.705434] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.709928] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.714798] arm-smmu 10000000.iommu: stage 1 translation [ 2.720108] arm-smmu 10000000.iommu: stage 2 translation [ 2.725782] arm-smmu 10000000.iommu: nested translation [ 2.731093] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.738007] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.747984] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.751362] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.757952] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.765706] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.770729] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.775451] arm-smmu 12000000.iommu: stage 1 translation [ 2.781228] arm-smmu 12000000.iommu: stage 2 translation [ 2.786385] arm-smmu 12000000.iommu: nested translation [ 2.791831] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.799250] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.808976] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.812119] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.818931] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.826128] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.836194] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.839077] tegra_profiler: auth: init [ 2.843620] THERMAL EST: found 3 subdevs [ 2.846776] THERMAL EST num_resources: 0 [ 2.850872] [THERMAL EST subdev 0] [ 2.853937] [THERMAL EST subdev 1] [ 2.857611] [THERMAL EST subdev 2] [ 2.860593] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.867108] THERMAL EST: thz register success. [ 2.871297] THERMAL EST: end of probe, return err: 0 [ 2.876617] nvsciipc: loaded module [ 2.883746] tun: Universal TUN/TAP device driver, 1.6 [ 2.886394] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.892624] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.897915] e1000e: Intel(R) PRO/1000 Network Driver [ 2.902857] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.909195] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.914480] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.920680] PPP generic driver version 2.4.2 [ 2.924913] PPP BSD Compression module registered [ 2.929458] PPP Deflate Compression module registered [ 2.934450] PPP MPPE Compression module registered [ 2.939732] usbcore: registered new interface driver r8152 [ 2.944973] usbcore: registered new interface driver asix [ 2.950571] usbcore: registered new interface driver ax88179_178a [ 2.956682] usbcore: registered new interface driver cdc_ether [ 2.962382] usbcore: registered new interface driver net1080 [ 2.967980] usbcore: registered new interface driver cdc_subset [ 2.974282] usbcore: registered new interface driver zaurus [ 2.979711] usbcore: registered new interface driver cdc_ncm [ 2.985387] usbcore: registered new interface driver aqc111 [ 2.991027] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.997358] ohci-pci: OHCI PCI platform driver [ 3.001409] ohci-platform: OHCI generic platform driver [ 3.007259] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.013571] usbcore: registered new interface driver uas [ 3.017705] usbcore: registered new interface driver usb-storage [ 3.024150] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.030093] mousedev: PS/2 mouse device common for all mice [ 3.035108] usbcore: registered new interface driver xpad [ 3.043181] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.045879] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.053640] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.060321] i2c /dev entries driver [ 3.063516] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.069279] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.074407] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.079834] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.085348] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.090684] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.096284] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.109819] device-mapper: uevent: version 1.0.3 [ 3.110286] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.116507] cpuidle: Initializing cpuidle driver [ 3.120421] sdhci: Secure Digital Host Controller Interface driver [ 3.125199] sdhci: Copyright(c) Pierre Ossman [ 3.129558] Synopsys Designware Multimedia Card Interface Driver [ 3.135492] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.141519] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.142297] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.154910] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.176184] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.185828] vdd-1v0: supplied by regulator-dummy [ 3.191391] vdd-1v8-hs: supplied by regulator-dummy [ 3.196236] vdd-1v8-ls: supplied by regulator-dummy [ 3.201186] vdd-1v8-ao: supplied by regulator-dummy [ 3.205160] vddio-ddr-1v1: supplied by regulator-dummy [ 3.209654] vdd-rtc: supplied by regulator-dummy [ 3.211426] spmic-ldo1: supplied by regulator-dummy [ 3.212677] vdd-ao-3v3: supplied by regulator-dummy [ 3.218896] vddio-emmc-3v3: supplied by regulator-dummy [ 3.225285] spmic-ldo4: supplied by regulator-dummy [ 3.226492] vdd-usb-3v3: supplied by regulator-dummy [ 3.232685] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.239056] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.244620] spmic-ldo8: supplied by vdd-1v8-ls [ 3.246135] gpio-510 (gpio_default): hogged as output/high [ 3.247526] gpio-511 (gpio_default): hogged as output/high [ 3.250562] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.387924] max77686-rtc max77620-rtc: registered as rtc0 [ 3.389432] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.389794] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.206740] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.207967] hid: raw HID events driver (C) Jiri Kosina [ 4.208807] usbcore: registered new interface driver usbhid [ 4.208951] usbhid: USB HID core driver [ 4.211067] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.212452] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.016827] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.091006] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.988 ms) ÿá[ 4.296666] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.297213] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.298043] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.298727] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.300438] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.301102] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.301725] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.303149] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.303373] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.306181] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.313392] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.319358] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.324846] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.330185] denver_knobs_init:MTS_VERSION:55637613 [ 4.343749] t19x_cache tegra-cache: probed [ 4.348181] optee: probing for conduit method. [ 4.349074] optee: revision 3.16 (65cc2218) [ 4.350085] optee: dynamic shared memory is enabled [ 4.351997] optee: initialized driver [ 4.359252] nvpmodel: initialized successfully [ 4.360093] tegra_hv: get_hvd: not initialized yet [ 4.363696] user_ivc_mempool: hypervisor not present [ 4.370030] usbcore: registered new interface driver snd-usb-audio [ 4.376337] u32 classifier [ 4.377764] input device check on [ 4.381477] Actions configured [ 4.385004] Initializing XFRM netlink socket [ 4.389715] NET: Registered protocol family 10 [ 4.396715] Segment Routing with IPv6 [ 4.397384] NET: Registered protocol family 17 [ 4.401415] NET: Registered protocol family 15 [ 4.406066] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.419577] Bluetooth: RFCOMM socket layer initialized [ 4.424305] Bluetooth: RFCOMM ver 1.11 [ 4.428000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.434065] Bluetooth: HIDP socket layer initialized [ 4.439694] 9pnet: Installing 9P2000 support [ 4.443284] Key type dns_resolver registered [ 4.448915] registered taskstats version 1 [ 4.451938] Loading compiled-in X.509 certificates [ 4.464245] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.467266] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.477313] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.479621] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.488486] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.496663] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.611859] tegra194-pcie 14160000.pcie: Link up [ 4.614789] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.614974] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.615163] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.615474] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.615688] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.616106] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.616533] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.628961] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.629453] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.630120] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.631642] pci 0004:01:00.0: supports D1 D2 [ 4.631788] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.642681] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.643067] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.643302] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.643792] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.644278] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.644470] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.646658] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.654194] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.662645] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.673163] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.677870] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.682899] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.690468] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.699718] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.700605] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.708812] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.717547] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.820008] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.820585] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.820839] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.821024] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.821482] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.821679] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.822040] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.822466] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.847426] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.847750] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.849994] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.851338] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.853338] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.854737] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.856019] pci 0005:00:00.0: Removing from iommu group 7 [ 5.856324] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.893773] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.921492] host1x 13e10000.host1x: initialized [ 5.923084] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.924213] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.925536] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.926299] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.927689] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.928423] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.929561] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.930249] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.931209] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.931932] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.932989] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.937221] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.947213] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.953875] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.964322] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.971128] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.981295] falcon 15340000.vic: Adding to iommu group 17 [ 5.996536] falcon 15340000.vic: initialized [ 5.997566] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.003278] falcon 15380000.nvjpg: initialized [ 6.003943] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.013648] falcon 154c0000.nvenc: initialized [ 6.014190] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.023697] falcon 15a80000.nvenc1: initialized [ 6.024351] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.036557] nvdec 15480000.nvdec: initialized [ 6.037110] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.048299] nvdec 15140000.nvdec1: initialized [ 6.048944] tsec 15500000.tsec: Adding to iommu group 18 [ 6.054548] tsec 15500000.tsec: initialized [ 6.055039] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.061514] tsec 15100000.tsecb: initialized [ 6.065409] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.094399] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.107236] gpio-374 (wifi-enable): hogged as output/high [ 6.107622] gpio-431 (camera-control-output-low): hogged as output/low [ 6.107968] gpio-432 (camera-control-output-low): hogged as output/low [ 6.109677] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.111761] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.112404] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.113832] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.117430] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.123268] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.128740] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.137289] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.144490] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.156399] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.161407] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.167256] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.175876] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.185404] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.192389] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.199883] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.206412] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.215988] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.222311] pva 16000000.pva0: Adding to iommu group 22 [ 6.250817] pva 16000000.pva0: initialized [ 6.256469] pva 16800000.pva1: Adding to iommu group 23 [ 6.268350] pva 16800000.pva1: initialized [ 6.272331] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.285431] nvdla 15880000.nvdla0: initialized [ 6.286757] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.296376] nvdla 158c0000.nvdla1: initialized [ 6.301467] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.301778] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.301849] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.302174] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.302356] tegradc 15200000.display: Adding to iommu group 26 [ 6.302372] tegradc 15210000.display: Adding to iommu group 26 [ 6.302556] tegradccommon 15200000.display-hub: dma mapping done [ 6.306170] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.310995] tegradc 15210000.display: disp0 connected to head1->sor [ 6.312643] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.318084] random: crng init done [ 6.318530] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.324302] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.327114] tegradc 15210000.display: DT parsed successfully [ 6.334339] tegra_cec 3960000.tegra_cec: probed [ 6.340026] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.340425] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.346887] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.350541] generic_infoframe_type: 0x87 [ 6.360883] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.364959] tegradc 15200000.display: DT parsed successfully [ 6.370908] kfuse 3830000.kfuse: initialized [ 6.374320] tegradc 15200000.display: Display dc.000000009ee4cb95 registered with id=0 [ 6.381633] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.391175] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.391422] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.399272] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.399301] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.406659] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.415182] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.421361] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.428749] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.430080] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.438672] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.445693] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.449741] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.458670] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.465693] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.510554] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.530707] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.531244] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.533582] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.541793] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.550207] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.557072] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.564360] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.571453] usb usb1: Product: xHCI Host Controller [ 6.576681] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.582976] usb usb1: SerialNumber: 3610000.xhci [ 6.588729] hub 1-0:1.0: USB hub found [ 6.591525] hub 1-0:1.0: 4 ports detected [ 6.596378] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.600941] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.608316] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.616090] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.623882] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.631133] usb usb2: Product: xHCI Host Controller [ 6.636371] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.642566] usb usb2: SerialNumber: 3610000.xhci [ 6.648151] hub 2-0:1.0: USB hub found [ 6.651008] hub 2-0:1.0: 4 ports detected [ 6.693104] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.699708] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.701554] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.701752] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.715056] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.716250] tegra194-cpufreq ccplex: probed with BWMGR [ 6.717623] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.718138] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.718592] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.719837] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.727042] tegra194-vi5 15c10000.vi: initialized [ 6.728278] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.728848] mmc0: CQHCI version 5.10 [ 6.729408] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.729614] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.729620] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.729627] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.729632] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.729636] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.731287] generic_infoframe_type: 0x87 [ 6.735903] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.740861] tegradc 15200000.display: DT parsed successfully [ 6.748975] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.755632] tegradc 15200000.display: Display dc.000000004fce035b registered with id=0 [ 6.762139] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.763879] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.769434] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.776414] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.779269] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.791391] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.791789] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.798044] nvethernet 2490000.ethernet: Macsec not supported [ 6.799335] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.805839] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.806076] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.814182] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.850722] mmc0: Command Queue Engine enabled [ 6.852715] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.853442] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.853448] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.855608] tegradc 15200000.display: probed [ 6.858973] mmc0: periodic cache flush enabled [ 6.859886] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.864639] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.872637] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.881615] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.890511] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.897109] tegra-se-nvhost 15810000.se: initialized [ 6.899732] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.911593] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.925891] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.927089] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.994971] Console: switching to colour frame buffer device 240x67 [ 7.000906] tegradc 15200000.display: fb registered [ 7.005613] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.005637] tegra-se-nvhost 15820000.se: initialized [ 7.012237] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.018276] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.022295] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.028488] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.041064] tegra-se-nvhost 15830000.se: initialized [ 7.041638] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.046742] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.053834] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.053842] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.053846] usb 1-2: Manufacturer: Generic [ 7.055977] hub 1-2:1.0: USB hub found [ 7.060436] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.068554] hub 1-2:1.0: 4 ports detected [ 7.086265] tegra-se-nvhost 15840000.se: initialized [ 7.096948] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.098782] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.102957] tegra_actmon d230000.actmon: in actmon_register()... [ 7.111517] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.124212] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.129267] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.129566] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.137835] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.145522] hvc_sysfs: hypervisor is not present [ 7.152231] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.152268] Extcon AUX1(HDMI) enable [ 7.152398] tegradc 15210000.display: disp1 connected to head1->sor [ 7.152515] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.152598] tegradc 15210000.display: DT parsed successfully [ 7.152632] tegradc 15210000.display: Display dc.00000000c333081d registered with id=1 [ 7.152747] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.152772] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.183364] ALSA device list: [ 7.185422] tegradc 15210000.display: probed [ 7.215249] No soundcards found. [ 7.218587] tegradc 15210000.display: fb registered [ 7.221560] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.221993] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.221999] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.222006] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.252524] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.252530] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.252535] usb 2-3: Manufacturer: Generic [ 7.252539] tegradc 15210000.display: blank - powerdown [ 7.263489] hub 2-3:1.0: USB hub found [ 7.264330] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.264334] Extcon DP: HPD disabled [ 7.264337] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.264347] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.270024] hub 2-3:1.0: 4 ports detected [ 7.273607] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.313022] tegradc 15200000.display: blank - powerdown [ 7.314039] Freeing unused kernel memory: 3968K [ 7.314272] Run /init as init process [ 7.339843] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.349222] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.349226] Extcon AUX1(HDMI) disable [ 7.359884] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.359890] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.372594] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.373405] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.386413] tegradc 15200000.display: unblank [ 7.387508] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.387702] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.393581] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.395377] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.399394] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.399397] Extcon AUX1(HDMI) enable [ 7.412127] tegradc 15200000.display: sync windows ret = 246 [ 7.445317] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.447016] Extcon HDMI: HPD enabled [ 7.448501] tegradc 15200000.display: hdmi: plugged [ 7.488987] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.490767] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.492460] usb 1-3: Product: Bluetooth Radio [ 7.493952] usb 1-3: Manufacturer: Realtek [ 7.495516] usb 1-3: SerialNumber: 00e04c000001 [ 7.495559] Root device found: mmcblk0p1 [ 7.500660] Found dev node: /dev/mmcblk0p1 [ 7.537721] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.543308] Rootfs mounted over mmcblk0p1 [ 7.587525] Switching from initrd to actual rootfs [ 7.751541] systemd[1]: System time before build time, advancing clock. [ 7.823297] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.828566] systemd[1]: Detected architecture arm64. [ 7.886854] systemd[1]: Set hostname to . [ 8.054154] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.416084] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.417887] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.423299] systemd[1]: Created slice system-modprobe.slice. [ 8.428234] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.432450] systemd[1]: Created slice User and Session Slice. [ 8.436078] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.440300] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.443686] systemd[1]: Reached target User and Group Name Lookups. [ 8.447166] systemd[1]: Reached target Slices. [ 8.450303] systemd[1]: Reached target Swap. [ 8.454400] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.458145] systemd[1]: Listening on Syslog Socket. [ 8.461765] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.465275] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.469554] systemd[1]: Listening on Journal Audit Socket. [ 8.474509] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.478856] systemd[1]: Listening on Journal Socket. [ 8.482774] systemd[1]: Listening on udev Control Socket. [ 8.486162] systemd[1]: Listening on udev Kernel Socket. [ 8.494756] systemd[1]: Mounting Huge Pages File System... [ 8.503314] systemd[1]: Mounting POSIX Message Queue File System... [ 8.511597] systemd[1]: Mounting RPC Pipe File System... [ 8.520547] systemd[1]: Mounting Kernel Debug File System... [ 8.529236] systemd[1]: Mounting Kernel Trace File System... [ 8.539581] systemd[1]: Starting Journal Service... [ 8.548800] systemd[1]: Starting Set the console keyboard layout... [ 8.556974] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.560451] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.566931] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.574963] systemd[1]: Started Nameserver information manager. [ 8.582213] systemd[1]: Reached target Network (Pre). [ 8.589774] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.591538] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.599918] systemd[1]: Starting Load Kernel Modules... [ 8.607591] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.616700] systemd[1]: Starting udev Coldplug all Devices... [ 8.627306] systemd[1]: Mounted Huge Pages File System. [ 8.631607] systemd[1]: Mounted POSIX Message Queue File System. [ 8.635567] systemd[1]: Mounted RPC Pipe File System. [ 8.639002] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.639320] systemd[1]: Mounted Kernel Debug File System. [ 8.646180] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.647880] systemd[1]: Mounted Kernel Trace File System. [ 8.648516] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.650909] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.650921] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.650925] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.651306] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.655728] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.658533] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.658549] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.667640] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.673183] systemd[1]: nvfb-udev.service: Succeeded. [ 8.677604] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.688993] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.694879] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.696721] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.709970] systemd[1]: Starting Load/Save Random Seed... [ 8.718229] systemd[1]: Starting Create System Users... [ 8.753498] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.753498] [ 8.768904] systemd[1]: Finished Load/Save Random Seed. [ 8.781805] systemd[1]: Finished Create System Users. [ 8.791272] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.798021] systemd[1]: Finished Load Kernel Modules. [ 8.802516] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.809523] systemd[1]: Mounting Kernel Configuration File System... [ 8.819100] systemd[1]: Started OP-TEE Client Supplicant. [ 8.827649] systemd[1]: Starting Apply Kernel Variables... [ 8.837718] systemd[1]: Finished Set the console keyboard layout. [ 8.841797] systemd[1]: Mounted Kernel Configuration File System. [ 8.858329] systemd[1]: Finished Create Static Device Nodes in /dev. [ 10.252720] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.262080] imx219 9-0010: board setup failed [ 10.263644] imx219: probe of 9-0010 failed with error -121 [ 10.282502] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.291915] imx219 10-0010: board setup failed [ 10.293518] imx219: probe of 10-0010 failed with error -121 [ 10.402142] hot-surface-alert cooling state: 0 -> 1 [ 11.269831] using random self ethernet address [ 11.271116] using random host ethernet address [ 11.611462] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.612726] Creating 1 MTD partitions on "spi6.0": [ 11.614926] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.575326] using random self ethernet address [ 12.575333] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.791065] nvidia: loading out-of-tree module taints kernel. [ 59.065680] watchdog: watchdog0: watchdog did not stop! [ 59.536421] Trying to unregister non-registered hwtime source [ 62.594901] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.596598] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] tiíÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.645] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.647] I> width = 720, height = 480, frequency = 26973026 [0003.651] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.745] initializing target [0003.746] calling apps_init() [0003.746] starting app kernel_boot_app [0003.747] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000685] Console: colour dummy device 80x25 [ 0.002024] printk: console [tty0] enabled [ 0.002093] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002128] pid_max: default: 32768 minimum: 301 [ 0.002304] LSM: Security Framework initializing [ 0.002362] Yama: becoming mindful. [ 0.002405] SELinux: Initializing. [ 0.002552] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002592] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005675] rcu: Hierarchical SRCU implementation. [ 0.005922] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006769] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006830] DTB Build time: Aug 10 2022 20:31:49 [ 0.009573] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009823] Remapping and enabling EFI services. [ 0.011890] smp: Bringing up secondary CPUs ... [ 0.041187] Detected PIPT I-cache on CPU1 [ 0.041302] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071828] Detected PIPT I-cache on CPU2 [ 0.071977] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101565] Detected PIPT I-cache on CPU3 [ 0.101705] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131402] Detected PIPT I-cache on CPU4 [ 0.131508] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161151] Detected PIPT I-cache on CPU5 [ 0.161292] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161678] smp: Brought up 1 node, 6 CPUs [ 0.161796] SMP: Total of 6 processors activated. [ 0.161835] CPU features: detected: Privileged Access Never [ 0.161857] CPU features: detected: LSE atomic instructions [ 0.161870] CPU features: detected: User Access Override [ 0.161883] CPU features: detected: 32-bit EL0 Support [ 0.161895] CPU features: detected: RAS Extension Support [ 0.161907] CPU features: detected: CRC32 instructions [ 0.161920] CPU features: detected: 32-bit EL1 Support [ 0.230217] CPU: All CPU(s) started at EL2 [ 0.236478] devtmpfs: initialized [ 0.281801] Registered cp15_barrier emulation handler [ 0.281911] Registered setend emulation handler [ 0.281934] KASLR enabled [ 0.282174] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.282195] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.283507] pinctrl core: initialized pinctrl subsystem [ 0.284410] SMBIOS 3.0.0 present. [ 0.284439] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.285073] NET: Registered protocol family 16 [ 0.287160] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.287662] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.288370] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.288428] audit: initializing netlink subsys (disabled) [ 0.288729] audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1 [ 0.289150] thermal_sys: Registered thermal governor 'step_wise' [ 0.289157] thermal_sys: Registered thermal governor 'power_allocator' [ 0.289171] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.291327] cpuidle: using governor menu [ 0.291606] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.292022] ASID allocator initialised with 32768 entries [ 0.292238] Serial: AMBA PL011 UART driver [ 0.295277] Tegra reboot handler registered. [ 0.366727] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.366862] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.367076] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.367118] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.367298] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.367340] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.367501] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.367541] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.367684] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.367723] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.370061] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.370096] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.370124] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.370153] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.370182] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.370226] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.370261] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.370341] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.370384] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.370414] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.370437] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.370461] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.370489] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.370513] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.370535] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.370567] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.370590] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.370677] mc-err: mcerr ops are set to t19x [ 0.383725] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.383755] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.383768] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.383779] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.390994] ACPI: Interpreter disabled. [ 0.392308] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.393616] iommu: Default domain type: Translated [ 0.393682] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.394091] SCSI subsystem initialized [ 0.394258] usbcore: registered new interface driver usbfs [ 0.394318] usbcore: registered new interface driver hub [ 0.394352] usbcore: registered new device driver usb [ 0.394812] mc: Linux media interface: v0.10 [ 0.394855] videodev: Linux video capture interface: v2.00 [ 0.395168] pps_core: LinuxPPS API ver. 1 registered [ 0.395179] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.395203] PTP clock support registered [ 0.395427] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.395760] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.395818] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.396492] Registered efivars operations [ 0.402826] FPGA manager framework [ 0.402932] Advanced Linux Sound Architecture Driver Initialized. [ 0.403532] Bluetooth: Core ver 2.22 [ 0.403568] NET: Registered protocol family 31 [ 0.403579] Bluetooth: HCI device and connection manager initialized [ 0.403594] Bluetooth: HCI socket layer initialized [ 0.403608] Bluetooth: L2CAP socket layer initialized [ 0.403628] Bluetooth: SCO socket layer initialized [ 0.405246] camchar: rtcpu character device driver loaded [ 0.405967] clocksource: Switched to clocksource arch_sys_counter [ 0.698481] VFS: Disk quotas dquot_6.6.0 [ 0.698552] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.698865] pnp: PnP ACPI: disabled [ 0.710807] la/ptsa driver initialized. [ 0.710925] NET: Registered protocol family 2 [ 0.711077] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.716813] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.716877] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.717198] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.717632] TCP: Hash tables configured (established 65536 bind 65536) [ 0.717758] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.717847] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.718116] NET: Registered protocol family 1 [ 0.718778] RPC: Registered named UNIX socket transport module. [ 0.718792] RPC: Registered udp transport module. [ 0.718802] RPC: Registered tcp transport module. [ 0.718810] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.718844] PCI: CLS 0 bytes, default 64 [ 0.719062] Trying to unpack rootfs image as initramfs... [ 0.904407] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.906624] Freeing initrd memory: 8196K [ 0.910397] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.910429] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.910460] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.910971] kvm [1]: IPA Size Limit: 40 bits [ 0.911514] kvm [1]: vgic interrupt IRQ9 [ 0.912007] kvm [1]: VHE mode initialized successfully [ 0.913254] Initialise system trusted keyrings [ 0.913505] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.918086] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.918710] NFS: Registering the id_resolver key type [ 0.918735] Key type id_resolver registered [ 0.918745] Key type id_legacy registered [ 0.918802] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.918819] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.918865] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.926440] NET: Registered protocol family 38 [ 0.926458] Key type asymmetric registered [ 0.926468] Asymmetric key parser 'x509' registered [ 0.926526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.926750] io scheduler mq-deadline registered [ 0.926765] io scheduler kyber registered [ 0.930969] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.933053] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.933110] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.933158] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.933205] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.933250] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.937007] scrncapt: init (heads:4 wins:6 planes:4) [ 0.937351] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.937991] EINJ: ACPI disabled. [ 0.940161] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.940182] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.940192] tegra-pmc: ### PMC reset level: L1 [ 0.940202] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.940237] tegra-pmc: PMC Prod config success [ 0.945079] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.949283] random: fast init done [ 0.949327] printk: console [ttyTCU0] enabled [ 2.501777] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.506318] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.510864] arm-smmu 10000000.iommu: stage 1 translation [ 2.516676] arm-smmu 10000000.iommu: stage 2 translation [ 2.521998] arm-smmu 10000000.iommu: nested translation [ 2.527449] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.534619] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.545937] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.547493] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.554045] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.562152] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.567339] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.571808] arm-smmu 12000000.iommu: stage 1 translation [ 2.577574] arm-smmu 12000000.iommu: stage 2 translation [ 2.582752] arm-smmu 12000000.iommu: nested translation [ 2.588426] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.595353] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.606618] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.608451] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.615289] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.622510] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.632417] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.635701] tegra_profiler: auth: init [ 2.639674] THERMAL EST: found 3 subdevs [ 2.643390] THERMAL EST num_resources: 0 [ 2.646973] [THERMAL EST subdev 0] [ 2.650551] [THERMAL EST subdev 1] [ 2.653945] [THERMAL EST subdev 2] [ 2.656950] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.663453] THERMAL EST: thz register success. [ 2.667655] THERMAL EST: end of probe, return err: 0 [ 2.673172] nvsciipc: loaded module [ 2.680095] tun: Universal TUN/TAP device driver, 1.6 [ 2.682802] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.688707] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.694555] e1000e: Intel(R) PRO/1000 Network Driver [ 2.699206] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.705552] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.710843] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.717048] PPP generic driver version 2.4.2 [ 2.721288] PPP BSD Compression module registered [ 2.725810] PPP Deflate Compression module registered [ 2.731059] PPP MPPE Compression module registered [ 2.735810] usbcore: registered new interface driver r8152 [ 2.741579] usbcore: registered new interface driver asix [ 2.746659] usbcore: registered new interface driver ax88179_178a [ 2.752779] usbcore: registered new interface driver cdc_ether [ 2.758995] usbcore: registered new interface driver net1080 [ 2.764595] usbcore: registered new interface driver cdc_subset [ 2.770383] usbcore: registered new interface driver zaurus [ 2.776068] usbcore: registered new interface driver cdc_ncm [ 2.781744] usbcore: registered new interface driver aqc111 [ 2.787405] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.793718] ohci-pci: OHCI PCI platform driver [ 2.797762] ohci-platform: OHCI generic platform driver [ 2.803606] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.810274] usbcore: registered new interface driver uas [ 2.814308] usbcore: registered new interface driver usb-storage [ 2.820232] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.826525] mousedev: PS/2 mouse device common for all mice [ 2.831211] usbcore: registered new interface driver xpad [ 2.839548] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.842187] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.850044] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.856580] i2c /dev entries driver [ 2.859867] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.865364] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.870930] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.876204] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.881997] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.887054] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.892443] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.905572] device-mapper: uevent: version 1.0.3 [ 2.906052] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.912828] cpuidle: Initializing cpuidle driver [ 2.916864] sdhci: Secure Digital Host Controller Interface driver [ 2.921562] sdhci: Copyright(c) Pierre Ossman [ 2.925916] Synopsys Designware Multimedia Card Interface Driver [ 2.931846] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.938069] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.939044] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.951274] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.968872] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.977705] vdd-1v0: supplied by regulator-dummy [ 2.983062] vdd-1v8-hs: supplied by regulator-dummy [ 2.987678] vdd-1v8-ls: supplied by regulator-dummy [ 2.992325] vdd-1v8-ao: supplied by regulator-dummy [ 2.996051] vddio-ddr-1v1: supplied by regulator-dummy [ 3.000320] vdd-rtc: supplied by regulator-dummy [ 3.001887] spmic-ldo1: supplied by regulator-dummy [ 3.003012] vdd-ao-3v3: supplied by regulator-dummy [ 3.009046] vddio-emmc-3v3: supplied by regulator-dummy [ 3.015108] spmic-ldo4: supplied by regulator-dummy [ 3.016223] vdd-usb-3v3: supplied by regulator-dummy [ 3.022635] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.028623] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.034046] spmic-ldo8: supplied by vdd-1v8-ls [ 3.035393] gpio-510 (gpio_default): hogged as output/high [ 3.038054] gpio-511 (gpio_default): hogged as output/high [ 3.044933] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.183276] max77686-rtc max77620-rtc: registered as rtc0 [ 3.184233] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.184532] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.877697] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.878583] hid: raw HID events driver (C) Jiri Kosina [ 3.879173] usbcore: registered new interface driver usbhid [ 3.879335] usbhid: USB HID core driver [ 3.880916] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.882025] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.867693] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.943818] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.936 ms) ÿá[ 3.967652] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.968162] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.969116] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.969742] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.971271] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.971901] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.972403] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.973546] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.973779] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.975487] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.983791] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.990477] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.995355] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.001118] denver_knobs_init:MTS_VERSION:55637613 [ 4.014975] t19x_cache tegra-cache: probed [ 4.017245] optee: probing for conduit method. [ 4.018096] optee: revision 3.16 (65cc2218) [ 4.019042] optee: dynamic shared memory is enabled [ 4.022793] optee: initialized driver [ 4.029696] nvpmodel: initialized successfully [ 4.030664] tegra_hv: get_hvd: not initialized yet [ 4.034919] user_ivc_mempool: hypervisor not present [ 4.041172] usbcore: registered new interface driver snd-usb-audio [ 4.047226] u32 classifier [ 4.048650] input device check on [ 4.052467] Actions configured [ 4.056273] Initializing XFRM netlink socket [ 4.061018] NET: Registered protocol family 10 [ 4.066694] Segment Routing with IPv6 [ 4.068235] NET: Registered protocol family 17 [ 4.072788] NET: Registered protocol family 15 [ 4.076921] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.090589] Bluetooth: RFCOMM socket layer initialized [ 4.095240] Bluetooth: RFCOMM ver 1.11 [ 4.099354] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.104981] Bluetooth: HIDP socket layer initialized [ 4.110727] 9pnet: Installing 9P2000 support [ 4.114392] Key type dns_resolver registered [ 4.119629] registered taskstats version 1 [ 4.122812] Loading compiled-in X.509 certificates [ 4.135085] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.138962] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.148419] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.150862] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.159564] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.167772] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.286033] tegra194-pcie 14160000.pcie: Link up [ 4.288826] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.289012] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.289147] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.289350] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.289525] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.289848] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.290282] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.299158] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.299682] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.300084] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.301542] pci 0004:01:00.0: supports D1 D2 [ 4.301746] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.309672] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.310184] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.310406] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.310756] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.311028] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.314804] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.320878] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.328255] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.336656] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.346655] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.351341] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.357020] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.363929] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.372725] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.374535] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.383206] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.391546] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.498091] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.498760] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.498939] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.499103] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.499305] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.499526] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.499925] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.500328] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.514561] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.514924] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.516586] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.517932] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.519386] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.520640] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.521458] pci 0005:00:00.0: Removing from iommu group 7 [ 5.521706] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.559562] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.581002] host1x 13e10000.host1x: initialized [ 5.582920] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.583727] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.584757] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.585312] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.586415] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.587054] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.588039] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.588689] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.591604] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.598297] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.608197] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.615179] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.625350] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.632265] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.642546] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.649258] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.658870] falcon 15340000.vic: Adding to iommu group 17 [ 5.673142] falcon 15340000.vic: initialized [ 5.674219] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.679615] falcon 15380000.nvjpg: initialized [ 5.680252] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.692139] falcon 154c0000.nvenc: initialized [ 5.692815] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.701761] falcon 15a80000.nvenc1: initialized [ 5.702444] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.714643] nvdec 15480000.nvdec: initialized [ 5.715370] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.724889] nvdec 15140000.nvdec1: initialized [ 5.725473] tsec 15500000.tsec: Adding to iommu group 18 [ 5.730751] tsec 15500000.tsec: initialized [ 5.731290] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.738571] tsec 15100000.tsecb: initialized [ 5.742359] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.767205] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.778979] gpio-374 (wifi-enable): hogged as output/high [ 5.779243] gpio-431 (camera-control-output-low): hogged as output/low [ 5.779481] gpio-432 (camera-control-output-low): hogged as output/low [ 5.781035] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.782411] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.783704] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.790354] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.795496] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.801526] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.807081] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.815605] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.822596] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.834239] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.839674] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.845477] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.854288] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.863644] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.870973] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.878321] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.884225] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.893890] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.900212] pva 16000000.pva0: Adding to iommu group 22 [ 5.926777] pva 16000000.pva0: initialized [ 5.930872] pva 16800000.pva1: Adding to iommu group 23 [ 5.941742] pva 16800000.pva1: initialized [ 5.945272] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.956994] nvdla 15880000.nvdla0: initialized [ 5.958219] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.967166] nvdla 158c0000.nvdla1: initialized [ 5.972260] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.972627] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.972983] tegradc 15200000.display: Adding to iommu group 26 [ 5.972992] tegradc 15210000.display: Adding to iommu group 26 [ 5.973023] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.973053] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.973604] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.974506] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 5.978349] tegradccommon 15200000.display-hub: dma mapping done [ 5.984056] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.001435] tegra_cec 3960000.tegra_cec: probed [ 6.006928] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.013813] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.018785] kfuse 3830000.kfuse: initialized [ 6.023332] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.029241] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.036397] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.042351] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.051750] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.056938] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.066163] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.071749] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.091641] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.091981] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.095159] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.103333] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.111930] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.118487] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.126119] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.133524] usb usb1: Product: xHCI Host Controller [ 6.138251] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.144562] usb usb1: SerialNumber: 3610000.xhci [ 6.150357] hub 1-0:1.0: USB hub found [ 6.153073] hub 1-0:1.0: 4 ports detected [ 6.157715] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.162507] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.170112] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.177824] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.185940] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.193219] usb usb2: Product: xHCI Host Controller [ 6.197904] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.204379] usb usb2: SerialNumber: 3610000.xhci [ 6.209802] hub 2-0:1.0: USB hub found [ 6.212631] hub 2-0:1.0: 4 ports detected [ 6.250920] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.256718] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.257932] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.258179] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.271275] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.272402] tegra194-cpufreq ccplex: probed with BWMGR [ 6.273466] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.274108] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.274617] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.275931] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.288198] mmc0: CQHCI version 5.10 [ 6.289194] tegra194-vi5 15c10000.vi: initialized [ 6.291788] tegradc 15210000.display: disp0 connected to head1->sor [ 6.292982] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.296689] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.302808] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.309799] tegradc 15210000.display: DT parsed successfully [ 6.318077] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.323631] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.323918] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.330072] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.338146] generic_infoframe_type: 0x87 [ 6.344033] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.344057] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.350041] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.350933] tegradc 15200000.display: DT parsed successfully [ 6.354973] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.358000] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.361344] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.367917] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.409427] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.411091] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.417525] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.417547] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.422094] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.434175] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.448205] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.454119] nvethernet 2490000.ethernet: Macsec not supported [ 6.460845] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.478115] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.479186] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.485706] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.492511] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.498546] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.508157] tegradc 15200000.display: probed [ 6.513407] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.525919] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.532458] tegra-se-nvhost 15810000.se: initialized [ 6.534182] mmc0: Command Queue Engine enabled [ 6.539766] mmc0: periodic cache flush enabled [ 6.540745] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.544159] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.544870] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.551070] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.557023] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.575785] Console: switching to colour frame buffer device 240x67 [ 6.581392] tegradc 15200000.display: fb registered [ 6.586532] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.592323] tegra-se-nvhost 15820000.se: initialized [ 6.592873] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.599030] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.603191] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.609493] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.618375] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.622155] tegra-se-nvhost 15830000.se: initialized [ 6.622498] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.629188] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.629193] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.629201] usb 1-2: Manufacturer: Generic [ 6.635623] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.665143] hub 1-2:1.0: USB hub found [ 6.665436] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.670194] hub 1-2:1.0: 4 ports detected [ 6.675877] tegra-se-nvhost 15840000.se: initialized [ 6.679437] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.686071] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.693940] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.700365] tegra_actmon d230000.actmon: in actmon_register()... [ 6.706632] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.713099] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.721130] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.726154] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.730872] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.732869] Extcon AUX1(HDMI) enable [ 6.733001] tegradc 15210000.display: disp1 connected to head1->sor [ 6.741556] hvc_sysfs: hypervisor is not present [ 6.748588] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.767400] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.770208] tegradc 15210000.display: DT parsed successfully [ 6.778449] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.778459] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.778591] ALSA device list: [ 6.778597] No soundcards found. [ 6.784262] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.791484] usb 2-3: Manufacturer: Generic [ 6.802396] hub 2-3:1.0: USB hub found [ 6.802533] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.812441] hub 2-3:1.0: 4 ports detected [ 6.814939] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.821413] tegradc 15210000.display: probed [ 6.840224] tegradc 15210000.display: fb registered [ 6.848185] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.852050] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.854578] Freeing unused kernel memory: 3968K [ 6.859771] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.869554] tegradc 15200000.display: blank - powerdown [ 6.874125] Run /init as init process [ 6.890009] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 6.913178] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.913183] Extcon AUX1(HDMI) disable [ 6.936519] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.937382] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.949177] tegradc 15200000.display: unblank [ 6.950410] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.950605] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.956697] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.958638] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.962696] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.962700] Extcon AUX1(HDMI) enable [ 6.975384] tegradc 15200000.display: sync windows ret = 247 [ 7.002339] tegradc 15210000.display: blank - powerdown [ 7.003928] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.003932] Extcon DP: HPD disabled [ 7.003936] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.003948] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.003953] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.010016] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.017081] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.023902] Extcon HDMI: HPD enabled [ 7.027558] tegradc 15200000.display: hdmi: plugged [ 7.039351] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.040918] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.048108] usb 1-3: Product: Bluetooth Radio [ 7.052756] usb 1-3: Manufacturer: Realtek [ 7.056702] usb 1-3: SerialNumber: 00e04c000001 [ 7.062567] Root device found: mmcblk0p1 [ 7.067503] Found dev node: /dev/mmcblk0p1 [ 7.074556] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.076177] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.110638] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.116249] Rootfs mounted over mmcblk0p1 [ 7.154351] Switching from initrd to actual rootfs [ 7.296468] systemd[1]: System time before build time, advancing clock. [ 7.368475] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.373625] systemd[1]: Detected architecture arm64. [ 7.431386] systemd[1]: Set hostname to . [ 7.591973] systemd-sysv-generator[245]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.935573] random: systemd: uninitialized urandom read (16 bytes read) [ 7.937358] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.939106] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.944601] systemd[1]: Created slice system-modprobe.slice. [ 7.948283] random: systemd: uninitialized urandom read (16 bytes read) [ 7.949808] random: crng init done [ 7.951043] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.955785] systemd[1]: Created slice User and Session Slice. [ 7.959444] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.963477] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.966847] systemd[1]: Reached target User and Group Name Lookups. [ 7.969939] systemd[1]: Reached target Slices. [ 7.973138] systemd[1]: Reached target Swap. [ 7.977034] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.980545] systemd[1]: Listening on Syslog Socket. [ 7.984010] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.987336] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.992189] systemd[1]: Listening on Journal Audit Socket. [ 7.995825] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.000560] systemd[1]: Listening on Journal Socket. [ 8.004200] systemd[1]: Listening on udev Control Socket. [ 8.007634] systemd[1]: Listening on udev Kernel Socket. [ 8.015841] systemd[1]: Mounting Huge Pages File System... [ 8.023975] systemd[1]: Mounting POSIX Message Queue File System... [ 8.031952] systemd[1]: Mounting RPC Pipe File System... [ 8.040151] systemd[1]: Mounting Kernel Debug File System... [ 8.048484] systemd[1]: Mounting Kernel Trace File System... [ 8.057947] systemd[1]: Starting Journal Service... [ 8.066558] systemd[1]: Starting Set the console keyboard layout... [ 8.074459] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.077870] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.085107] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.093278] systemd[1]: Started Nameserver information manager. [ 8.097885] systemd[1]: Reached target Network (Pre). [ 8.104732] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.106674] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.113693] systemd[1]: Starting Load Kernel Modules... [ 8.121204] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.130519] systemd[1]: Starting udev Coldplug all Devices... [ 8.141269] systemd[1]: Mounted Huge Pages File System. [ 8.144936] systemd[1]: Mounted POSIX Message Queue File System. [ 8.148487] systemd[1]: Mounted RPC Pipe File System. [ 8.151520] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.151888] systemd[1]: Mounted Kernel Debug File System. [ 8.158720] systemd[1]: Mounted Kernel Trace File System. [ 8.163259] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.164994] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.165390] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.167951] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.167963] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.167967] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.168152] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.168364] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.168506] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.168512] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.206749] systemd[1]: nvfb-udev.service: Succeeded. [ 8.210689] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.223014] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.235628] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.237288] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.245772] systemd[1]: Starting Load/Save Random Seed... [ 8.253817] systemd[1]: Starting Create System Users... [ 8.270608] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.270608] [ 8.311507] systemd[1]: Finished Load Kernel Modules. [ 8.317885] systemd[1]: Finished Load/Save Random Seed. [ 8.324015] systemd[1]: Finished Create System Users. [ 8.329021] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.335231] systemd[1]: Mounting Kernel Configuration File System... [ 8.343691] systemd[1]: Started OP-TEE Client Supplicant. [ 8.354524] systemd[1]: Starting Apply Kernel Variables... [ 8.364898] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.378006] systemd[1]: Finished Set the console keyboard layout. [ 8.385016] systemd[1]: Mounted Kernel Configuration File System. [ 9.660486] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.671714] imx219 9-0010: board setup failed [ 9.672930] imx219: probe of 9-0010 failed with error -121 [ 9.685141] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.695253] imx219 10-0010: board setup failed [ 9.696519] imx219: probe of 10-0010 failed with error -121 [ 9.877561] hot-surface-alert cooling state: 0 -> 1 [ 10.258713] using random self ethernet address [ 10.259907] using random host ethernet address [ 11.421260] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.422605] Creating 1 MTD partitions on "spi6.0": [ 11.423685] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.121833] using random self ethernet address [ 12.123432] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.839723] nvidia: loading out-of-tree module taints kernel. [ 58.947544] watchdog: watchdog0: watchdog did not stop! [ 59.453950] Trying to unregister non-registered hwtime source [ 62.514289] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.516570] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy : 1, badfÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized noc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 202ÿâavfs_clk_platform_post initialized ÿä2 aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.418] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.645] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.647] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.745] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000617] Console: colour dummy device 80x25 [ 0.002127] printk: console [tty0] enabled [ 0.002188] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002223] pid_max: default: 32768 minimum: 301 [ 0.002388] LSM: Security Framework initializing [ 0.002445] Yama: becoming mindful. [ 0.002491] SELinux: Initializing. [ 0.002633] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002672] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005622] rcu: Hierarchical SRCU implementation. [ 0.005862] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006575] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006649] DTB Build time: Aug 10 2022 20:31:49 [ 0.009372] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009605] Remapping and enabling EFI services. [ 0.012150] smp: Bringing up secondary CPUs ... [ 0.041343] Detected PIPT I-cache on CPU1 [ 0.041498] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070985] Detected PIPT I-cache on CPU2 [ 0.071144] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100730] Detected PIPT I-cache on CPU3 [ 0.100873] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130500] Detected PIPT I-cache on CPU4 [ 0.130664] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160359] Detected PIPT I-cache on CPU5 [ 0.160518] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160865] smp: Brought up 1 node, 6 CPUs [ 0.161148] SMP: Total of 6 processors activated. [ 0.161227] CPU features: detected: Privileged Access Never [ 0.161251] CPU features: detected: LSE atomic instructions [ 0.161265] CPU features: detected: User Access Override [ 0.161278] CPU features: detected: 32-bit EL0 Support [ 0.161291] CPU features: detected: RAS Extension Support [ 0.161306] CPU features: detected: CRC32 instructions [ 0.161320] CPU features: detected: 32-bit EL1 Support [ 0.237002] CPU: All CPU(s) started at EL2 [ 0.244138] devtmpfs: initialized [ 0.291359] Registered cp15_barrier emulation handler [ 0.291485] Registered setend emulation handler [ 0.291504] KASLR enabled [ 0.291789] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291813] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293204] pinctrl core: initialized pinctrl subsystem [ 0.294117] SMBIOS 3.0.0 present. [ 0.294159] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294772] NET: Registered protocol family 16 [ 0.296887] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.297618] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.298310] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.298367] audit: initializing netlink subsys (disabled) [ 0.298595] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.299044] thermal_sys: Registered thermal governor 'step_wise' [ 0.299052] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299067] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.301473] cpuidle: using governor menu [ 0.301899] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.302323] ASID allocator initialised with 32768 entries [ 0.302565] Serial: AMBA PL011 UART driver [ 0.306093] Tegra reboot handler registered. [ 0.378142] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.378270] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.378487] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.378525] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.378646] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.378682] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.378810] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.378845] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.378993] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.379038] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.381250] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.381291] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.381315] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.381342] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.381368] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.381395] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.381418] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.381444] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.381467] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.381492] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.381518] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.381548] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.381571] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.381597] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.381642] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.381669] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.381691] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.381781] mc-err: mcerr ops are set to t19x [ 0.395155] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.395176] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.395188] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.395200] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.401896] ACPI: Interpreter disabled. [ 0.403125] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.404449] iommu: Default domain type: Translated [ 0.404529] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.404980] SCSI subsystem initialized [ 0.405196] usbcore: registered new interface driver usbfs [ 0.405255] usbcore: registered new interface driver hub [ 0.405291] usbcore: registered new device driver usb [ 0.405732] mc: Linux media interface: v0.10 [ 0.405765] videodev: Linux video capture interface: v2.00 [ 0.406113] pps_core: LinuxPPS API ver. 1 registered [ 0.406125] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.406146] PTP clock support registered [ 0.406392] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.406673] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.406754] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.407399] Registered efivars operations [ 0.412522] FPGA manager framework [ 0.412649] Advanced Linux Sound Architecture Driver Initialized. [ 0.413365] Bluetooth: Core ver 2.22 [ 0.413405] NET: Registered protocol family 31 [ 0.413417] Bluetooth: HCI device and connection manager initialized [ 0.413434] Bluetooth: HCI socket layer initialized [ 0.413449] Bluetooth: L2CAP socket layer initialized [ 0.413470] Bluetooth: SCO socket layer initialized [ 0.415323] camchar: rtcpu character device driver loaded [ 0.416282] clocksource: Switched to clocksource arch_sys_counter [ 0.751772] VFS: Disk quotas dquot_6.6.0 [ 0.751869] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.752245] pnp: PnP ACPI: disabled [ 0.766220] la/ptsa driver initialized. [ 0.766348] NET: Registered protocol family 2 [ 0.766590] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.772054] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.772164] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.772535] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.772969] TCP: Hash tables configured (established 65536 bind 65536) [ 0.773105] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.773195] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.773412] NET: Registered protocol family 1 [ 0.774398] RPC: Registered named UNIX socket transport module. [ 0.774455] RPC: Registered udp transport module. [ 0.774475] RPC: Registered tcp transport module. [ 0.774493] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.774551] PCI: CLS 0 bytes, default 64 [ 0.774857] Trying to unpack rootfs image as initramfs... [ 1.047681] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.050990] Freeing initrd memory: 8196K [ 1.055108] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.055144] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.055210] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.055531] kvm [1]: IPA Size Limit: 40 bits [ 1.055953] kvm [1]: vgic interrupt IRQ9 [ 1.056466] kvm [1]: VHE mode initialized successfully [ 1.058176] Initialise system trusted keyrings [ 1.058555] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.065727] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.066666] NFS: Registering the id_resolver key type [ 1.066710] Key type id_resolver registered [ 1.066728] Key type id_legacy registered [ 1.066880] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.066915] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.066975] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.077274] NET: Registered protocol family 38 [ 1.077302] Key type asymmetric registered [ 1.077330] Asymmetric key parser 'x509' registered [ 1.077421] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.077683] io scheduler mq-deadline registered [ 1.077701] io scheduler kyber registered [ 1.083732] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.086546] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.086626] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.086699] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.086787] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.086859] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.092220] scrncapt: init (heads:4 wins:6 planes:4) [ 1.092419] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.093495] EINJ: ACPI disabled. [ 1.096882] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.096908] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.096924] tegra-pmc: ### PMC reset level: L1 [ 1.096938] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.096986] tegra-pmc: PMC Prod config success [ 1.102210] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.106779] random: fast init done [ 1.106956] printk: console [ttyTCU0] enabled [ 2.659122] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.664134] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.668720] arm-smmu 10000000.iommu: stage 1 translation [ 2.674269] arm-smmu 10000000.iommu: stage 2 translation [ 2.679443] arm-smmu 10000000.iommu: nested translation [ 2.684796] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.691983] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.703045] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.705072] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.711651] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.719613] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.724689] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.729397] arm-smmu 12000000.iommu: stage 1 translation [ 2.735163] arm-smmu 12000000.iommu: stage 2 translation [ 2.740331] arm-smmu 12000000.iommu: nested translation [ 2.746019] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.753197] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.763988] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.766060] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.772878] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.780292] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.790001] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.793076] tegra_profiler: auth: init [ 2.797478] THERMAL EST: found 3 subdevs [ 2.800974] THERMAL EST num_resources: 0 [ 2.804815] [THERMAL EST subdev 0] [ 2.807865] [THERMAL EST subdev 1] [ 2.811551] [THERMAL EST subdev 2] [ 2.814568] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.821048] THERMAL EST: thz register success. [ 2.825238] THERMAL EST: end of probe, return err: 0 [ 2.830748] nvsciipc: loaded module [ 2.837950] tun: Universal TUN/TAP device driver, 1.6 [ 2.839936] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.846562] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.851935] e1000e: Intel(R) PRO/1000 Network Driver [ 2.857052] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.862875] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.868426] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.874298] PPP generic driver version 2.4.2 [ 2.878577] PPP BSD Compression module registered [ 2.883407] PPP Deflate Compression module registered [ 2.888649] PPP MPPE Compression module registered [ 2.893407] usbcore: registered new interface driver r8152 [ 2.899179] usbcore: registered new interface driver asix [ 2.904265] usbcore: registered new interface driver ax88179_178a [ 2.910637] usbcore: registered new interface driver cdc_ether [ 2.916322] usbcore: registered new interface driver net1080 [ 2.921922] usbcore: registered new interface driver cdc_subset [ 2.928253] usbcore: registered new interface driver zaurus [ 2.933663] usbcore: registered new interface driver cdc_ncm [ 2.939338] usbcore: registered new interface driver aqc111 [ 2.944989] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.951310] ohci-pci: OHCI PCI platform driver [ 2.955378] ohci-platform: OHCI generic platform driver [ 2.961281] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.967971] usbcore: registered new interface driver uas [ 2.971657] usbcore: registered new interface driver usb-storage [ 2.977797] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.984124] mousedev: PS/2 mouse device common for all mice [ 2.989053] usbcore: registered new interface driver xpad [ 2.996752] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.999546] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.007337] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.013876] i2c /dev entries driver [ 3.017471] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.023052] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.028694] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.033973] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.039583] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.044634] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.049965] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.064174] device-mapper: uevent: version 1.0.3 [ 3.064704] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.070506] cpuidle: Initializing cpuidle driver [ 3.074734] sdhci: Secure Digital Host Controller Interface driver [ 3.079400] sdhci: Copyright(c) Pierre Ossman [ 3.083250] Synopsys Designware Multimedia Card Interface Driver [ 3.089689] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.095628] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.101607] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.108997] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.130829] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.140516] vdd-1v0: supplied by regulator-dummy [ 3.146004] vdd-1v8-hs: supplied by regulator-dummy [ 3.150747] vdd-1v8-ls: supplied by regulator-dummy [ 3.155811] vdd-1v8-ao: supplied by regulator-dummy [ 3.159738] vddio-ddr-1v1: supplied by regulator-dummy [ 3.164281] vdd-rtc: supplied by regulator-dummy [ 3.165983] spmic-ldo1: supplied by regulator-dummy [ 3.167282] vdd-ao-3v3: supplied by regulator-dummy [ 3.173444] vddio-emmc-3v3: supplied by regulator-dummy [ 3.179744] spmic-ldo4: supplied by regulator-dummy [ 3.180968] vdd-usb-3v3: supplied by regulator-dummy [ 3.187120] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.193396] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.198923] spmic-ldo8: supplied by vdd-1v8-ls [ 3.200512] gpio-510 (gpio_default): hogged as output/high [ 3.201887] gpio-511 (gpio_default): hogged as output/high [ 3.204754] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.341535] max77686-rtc max77620-rtc: registered as rtc0 [ 3.342883] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.343231] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.170780] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.171899] hid: raw HID events driver (C) Jiri Kosina [ 4.172839] usbcore: registered new interface driver usbhid [ 4.172994] usbhid: USB HID core driver [ 4.175054] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.176461] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.060109] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.134304] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 75.003 ms) ÿá[ 4.261103] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.261692] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.262900] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.263794] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.265693] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.266427] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.267163] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.268740] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.269034] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.271914] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.277197] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.283617] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.288694] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.294947] denver_knobs_init:MTS_VERSION:55637613 [ 4.307566] t19x_cache tegra-cache: probed [ 4.310381] optee: probing for conduit method. [ 4.311236] optee: revision 3.16 (65cc2218) [ 4.312164] optee: dynamic shared memory is enabled [ 4.315884] optee: initialized driver [ 4.322273] nvpmodel: initialized successfully [ 4.323109] tegra_hv: get_hvd: not initialized yet [ 4.327943] user_ivc_mempool: hypervisor not present [ 4.334515] usbcore: registered new interface driver snd-usb-audio [ 4.340903] u32 classifier [ 4.341831] input device check on [ 4.345648] Actions configured [ 4.349073] Initializing XFRM netlink socket [ 4.354081] NET: Registered protocol family 10 [ 4.360722] Segment Routing with IPv6 [ 4.361433] NET: Registered protocol family 17 [ 4.365459] NET: Registered protocol family 15 [ 4.370118] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.383885] Bluetooth: RFCOMM socket layer initialized [ 4.388347] Bluetooth: RFCOMM ver 1.11 [ 4.392030] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.398187] Bluetooth: HIDP socket layer initialized [ 4.403730] 9pnet: Installing 9P2000 support [ 4.407318] Key type dns_resolver registered [ 4.413153] registered taskstats version 1 [ 4.415718] Loading compiled-in X.509 certificates [ 4.429496] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.431848] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.442113] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.443928] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.452378] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.460632] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.576318] tegra194-pcie 14160000.pcie: Link up [ 4.579476] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.579668] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.579790] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.580164] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.580444] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.580937] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.581434] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.593896] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.594430] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.594928] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.596780] pci 0004:01:00.0: supports D1 D2 [ 4.596935] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.608847] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.609141] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.609456] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.610010] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.610352] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.610649] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.611004] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.618406] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.627086] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.637436] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.641822] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.647491] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.654305] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.664056] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.664960] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.673258] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.681967] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.797288] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.797866] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.798107] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.798273] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.798584] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.798761] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.799189] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.799680] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.820208] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.820624] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.822790] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.824505] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.826244] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.827940] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.829173] pci 0005:00:00.0: Removing from iommu group 7 [ 5.829809] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.861853] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.883651] host1x 13e10000.host1x: initialized [ 5.885358] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.886239] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.887345] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.888035] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.889263] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.889841] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.890886] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.891498] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.892353] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.897397] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.907436] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.914242] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.924204] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.931331] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.941296] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.948532] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.958300] falcon 15340000.vic: Adding to iommu group 17 [ 5.971660] falcon 15340000.vic: initialized [ 5.972655] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.978161] falcon 15380000.nvjpg: initialized [ 5.978902] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.990371] falcon 154c0000.nvenc: initialized [ 5.990958] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.000472] falcon 15a80000.nvenc1: initialized [ 6.001006] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.014450] nvdec 15480000.nvdec: initialized [ 6.015007] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.024209] nvdec 15140000.nvdec1: initialized [ 6.024843] tsec 15500000.tsec: Adding to iommu group 18 [ 6.030127] tsec 15500000.tsec: initialized [ 6.030643] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.038103] tsec 15100000.tsecb: initialized [ 6.041881] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.066940] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.078292] gpio-374 (wifi-enable): hogged as output/high [ 6.078626] gpio-431 (camera-control-output-low): hogged as output/low [ 6.078882] gpio-432 (camera-control-output-low): hogged as output/low [ 6.080697] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.082648] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.083303] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.089751] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.094902] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.100529] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.106077] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.114330] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.121992] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.133242] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.138690] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.144569] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.153183] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.162641] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.170046] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.177333] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.183424] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.193055] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.199368] pva 16000000.pva0: Adding to iommu group 22 [ 6.226547] pva 16000000.pva0: initialized [ 6.231552] pva 16800000.pva1: Adding to iommu group 23 [ 6.242757] pva 16800000.pva1: initialized [ 6.247359] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.259722] nvdla 15880000.nvdla0: initialized [ 6.261528] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.270921] nvdla 158c0000.nvdla1: initialized [ 6.273294] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.273575] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.273891] tegradccommon 15200000.display-hub: dma mapping done [ 6.275906] tegradc 15200000.display: Adding to iommu group 26 [ 6.283841] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.284214] generic_infoframe_type: 0x87 [ 6.284501] tegradc 15200000.display: DT parsed successfully [ 6.284867] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.289038] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.290205] tegradc 15210000.display: Adding to iommu group 26 [ 6.295519] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.296030] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.313974] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.319148] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.319545] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.327491] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.332799] tegra_cec 3960000.tegra_cec: probed [ 6.333590] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.341040] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.351832] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.361972] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.365447] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.372514] kfuse 3830000.kfuse: initialized [ 6.383711] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.383970] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.399582] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.407291] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.407615] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.419886] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.420347] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.428463] tegradc 15210000.display: disp0 connected to head1->sor [ 6.441311] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.441601] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.448065] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.454520] tegradc 15210000.display: DT parsed successfully [ 6.464546] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.469106] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.483208] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.502878] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.503241] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.506439] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.515022] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.523516] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.530117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.537825] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.545136] usb usb1: Product: xHCI Host Controller [ 6.549761] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.556332] usb usb1: SerialNumber: 3610000.xhci [ 6.561598] hub 1-0:1.0: USB hub found [ 6.564801] hub 1-0:1.0: 4 ports detected [ 6.569587] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.574087] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.581706] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.589446] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.597501] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.604708] usb usb2: Product: xHCI Host Controller [ 6.609470] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.615650] usb usb2: SerialNumber: 3610000.xhci [ 6.621303] hub 2-0:1.0: USB hub found [ 6.624097] hub 2-0:1.0: 4 ports detected [ 6.664209] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.669791] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.671034] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.671226] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.684518] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.685511] tegra194-cpufreq ccplex: probed with BWMGR [ 6.686580] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.687296] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.687796] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.689068] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.698877] tegra194-vi5 15c10000.vi: initialized [ 6.700048] mmc0: CQHCI version 5.10 [ 6.700581] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.701329] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.701535] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.701540] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.701547] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.701559] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.708113] generic_infoframe_type: 0x87 [ 6.714261] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.722785] tegradc 15200000.display: DT parsed successfully [ 6.736320] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.737203] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.742191] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.745761] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.745767] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.794258] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.794725] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.809557] nvethernet 2490000.ethernet: Macsec not supported [ 6.809588] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.816716] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.823678] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.833043] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.840294] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.845549] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.851540] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.851815] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.858975] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.866067] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.872278] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.876416] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.882190] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.891488] tegra-se-nvhost 15810000.se: initialized [ 6.895031] random: crng init done [ 6.907039] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.923028] ************************************** [ 6.927914] CPU:0, Error:cbb-noc [ 6.931235] Error Logger : 0 [ 6.934388] ErrLog0 : 0x80030000 [ 6.938316] Transaction Type : RD - Read, Incrementing [ 6.943482] Error Code : SLV [ 6.947152] Error Source : Target [ 6.950740] Error Description : Target error detected by CBB slave [ 6.957309] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.964590] Packet header Lock : 0 [ 6.968502] Packet header Len1 : 3 [ 6.971745] NOC protocol version : version >= 2.7 [ 6.976921] ErrLog1 : 0x352428 [ 6.980058] ErrLog2 : 0x0 [ 6.982945] RouteId : 0x352428 [ 6.986631] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.991346] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.996157] TargSubRange : 18 [ 6.999667] SeqId : 0 [ 7.002195] ErrLog3 : 0x4045c [ 7.005689] ErrLog4 : 0x0 [ 7.008598] Address accessed : 0x15b4045c [ 7.012784] ErrLog5 : 0xa09f851 [ 7.016279] Non-Modify : 0x1 [ 7.019450] AXI ID : 0x14 [ 7.022583] Master ID : CCPLEX [ 7.025908] Security Group(GRPSEC): 0x7e [ 7.030366] Cache : 0x1 -- Bufferable [ 7.034567] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.041132] FALCONSEC : 0x0 [ 7.044283] Virtual Queuing Channel(VQC): 0x0 [ 7.048922] ************************************** [ 7.054208] ------------[ cut here ]------------ [ 7.058714] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.065023] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.070275] Modules linked in: [ 7.073258] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 7.079896] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.092405] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.098449] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.102910] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.107891] sp : ffff800010003de0 [ 7.111304] x29: ffff800010003de0 x28: 0000000000000001 [ 7.116730] x27: 0000000000000005 x26: ffffb1b4ea573f58 [ 7.122168] x25: ffffb1b4eaecce10 x24: 0000000000000001 [ 7.127320] x23: ffffb1b4ea867000 x22: ffffb1b4eaceea00 [ 7.132914] x21: 000000000000000f x20: ffff1fb600e66e80 [ 7.138427] x19: ffffb1b4eaceea00 x18: 0000000000000010 [ 7.143596] x17: ffffb1b4ea61d008 x16: 0000000037738113 [ 7.149189] x15: ffffb1b4eab62bf0 x14: 0720072007200720 [ 7.154718] x13: 0720072007200720 x12: 0720072007200720 [ 7.160218] x11: 0720072007200720 x10: 0720072007200720 [ 7.165746] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.171242] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.176752] x5 : 0000000000057fa8 x4 : ffffb1b4eab77968 [ 7.182177] x3 : 00000000ffffffff x2 : ffffb1b4e900e090 [ 7.187260] x1 : ffffb1b4eab62680 x0 : 0000000100010001 [ 7.192852] Call trace: [ 7.195306] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.199355] __handle_irq_event_percpu+0x68/0x2a0 [ 7.204061] handle_irq_event_percpu+0x40/0xa0 [ 7.208366] handle_irq_event+0x50/0xf0 [ 7.212111] handle_fasteoi_irq+0xc0/0x170 [ 7.216393] generic_handle_irq+0x40/0x60 [ 7.220421] __handle_domain_irq+0x70/0xd0 [ 7.224362] efi_header_end+0xb0/0xf0 [ 7.227859] el1_irq+0xd0/0x180 [ 7.231094] cpuidle_enter_state+0xb8/0x410 [ 7.235292] cpuidle_enter+0x40/0x60 [ 7.238794] call_cpuidle+0x44/0x80 [ 7.242035] do_idle+0x208/0x270 [ 7.245724] cpu_startup_entry+0x2c/0x70 [ 7.249217] rest_init+0xdc/0xe8 [ 7.252452] arch_call_rest_init+0x18/0x20 [ 7.256664] start_kernel+0x514/0x54c [ 7.259981] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.266191] ---[ end trace bf1db47d77e01675 ]--- [ 7.270910] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.278691] SMP: stopping secondary CPUs [ 7.282561] Kernel Offset: 0x31b4d8e50000 from 0xffff800010000000 [ 7.288665] PHYS_OFFSET: 0xffffe04b00000000 [ 7.292783] CPU features: 0x8240002,03802a30 [ 7.297257] Memory Limit: none [ 7.300139] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 66000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.355] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.356] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.029] > DEVICE_PROD: device prod is not initialized. [0002.334] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.335] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.336] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.336] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.336] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.337] I> dram_block larger than 80000000 [0002.339] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.351] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.354] I> found decompressor handler: lz4 [0002.583] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.584] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.203] I> Welcome to NVDisp-Init [0003.204] I> NVDisp-Init version: t194-f9ecfedc [0003.204] I> CPU-BL Params @ 0xca020000 [0003.204] I> 0) Base:0x00000000 Size:0x00000000 [0003.205] I> 1) Base:0xc8300000 Size:0x00100000 [0003.205] I> 2) Base:0xc9800000 Size:0x00200000 [0003.205] I> 3) Base:0xc8600000 Size:0x00200000 [0003.208] I> 4) Base:0xc8200000 Size:0x00100000 [0003.212] I> 5) Base:0xc8100000 Size:0x00100000 [0003.217] I> 6) Base:0xc9400000 Size:0x00400000 [0003.221] I> 7) Base:0xc9000000 Size:0x00400000 [0003.226] I> 8) Base:0xc8000000 Size:0x00100000 [0003.230] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.235] I> 10) Base:0xca800000 Size:0x00800000 [0003.239] I> 11) Base:0x40000000 Size:0x00040000 [0003.244] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.248] I> 13) Base:0x40046000 Size:0x00002000 [0003.252] I> 14) Base:0x40048000 Size:0x00002000 [0003.257] I> 15) Base:0xaf000000 Size:0x00004000 [0003.261] I> 16) Base:0x4004a000 Size:0x00002000 [0003.266] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.270] I> 18) Base:0x4004c000 Size:0x00002000 [0003.275] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.279] I> 20) Base:0x4004e000 Size:0x00002000 [0003.284] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.288] I> 22) Base:0x00000000 Size:0x00000000 [0003.293] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.297] I> 24) Base:0xcc000000 Size:0x02000000 [0003.302] I> 25) Base:0x40050000 Size:0x00002000 [0003.306] I> 26) Base:0x40040000 Size:0x00006000 [0003.311] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.315] I> 28) Base:0xc8400000 Size:0x00200000 [0003.319] I> 29) Base:0xc8800000 Size:0x00400000 [0003.324] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.328] I> 31) Base:0x00000000 Size:0x00000000 [0003.333] I> 32) Base:0xf8000000 Size:0x08000000 [0003.337] I> 33) Base:0xce000000 Size:0x2a000000 [0003.342] I> 34) Base:0xcb000000 Size:0x01000000 [0003.346] I> 35) Base:0xae000000 Size:0x01000000 [0003.351] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.355] I> 37) Base:0xca000000 Size:0x00800000 [0003.360] I> 38) Base:0x80000000 Size:0x20000000 [0003.364] I> 39) Base:0xb0000000 Size:0x08000000 [0003.369] I> 40) Base:0x00000000 Size:0x00000000 [0003.373] I> 41) Base:0x00000000 Size:0x00000000 [0003.377] I> 42) Base:0x00000000 Size:0x00000000 [0003.382] I> 43) Base:0x00000000 Size:0x00000000 [0003.386] I> 44) Base:0x00000000 Size:0x00000000 [0003.391] I> 45) Base:0x00000000 Size:0x00000000 [0003.395] GIC-SPI Target CPU: 0 [0003.398] Interrupts Init done [0003.401] calling constructors [0003.404] initializing heap [0003.407] I> Heap: [0xa0960000 ... 0xadf00000] [0003.411] initializing threads [0003.414] initializing timers [0003.417] creating bootstrap completion thread [0003.421] top of bootstrap2() [0003.424] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.428] initializing platform [0003.431] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.437] W> device prod register failed [0003.441] I> Bl_dtb @0xadf00000 [0003.444] I> gpio framework initialized [0003.455] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.465] I> fixed regulator driver initialized [0003.481] I> register 'maxim' power off handle [0003.483] I> virtual i2c enabled [0003.484] I> registered 'maxim,max20024' pmic [0003.484] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.485] I> Boot-device: QSPI [0003.488] I> Boot_device: QSPI_FLASH instance: 0 [0003.492] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.503] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.510] I> QSPI source rate = 204000 Khz [0003.513] I> Requested rate for QSPI clock = 34000 Khz [0003.518] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.523] I> tx_clk_tap_delay : 0 [0003.526] I> rx_clk_tap_delay : 16 [0003.529] I> QSPI Flash Size = 32 MB [0003.537] I> Qspi initialized successfully [0003.538] I> qspi flash-0 params source = boot args [0003.542] W> No board IDs available [0003.545] E> Failed to get board id info! [0003.551] I> sdmmc-3 params source = safe params [0003.558] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.564] E> Failed to publish 00000003 [0003.568] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.648] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.649] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.650] I> width = 720, height = 480, frequency = 26973026 [0003.654] I> width = 720, height = 576, frequency = 26973026 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.688] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.748] initializing target [0003.748] calling apps_init() [0003.749] starting app kernel_boot_app [0003.750] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000959] Console: colour dummy device 80x25 [ 0.002416] printk: console [tty0] enabled [ 0.002484] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002520] pid_max: default: 32768 minimum: 301 [ 0.002715] LSM: Security Framework initializing [ 0.002779] Yama: becoming mindful. [ 0.002822] SELinux: Initializing. [ 0.002985] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003039] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006251] rcu: Hierarchical SRCU implementation. [ 0.006552] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007240] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007289] DTB Build time: Aug 10 2022 20:31:49 [ 0.010046] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010286] Remapping and enabling EFI services. [ 0.012378] smp: Bringing up secondary CPUs ... [ 0.041576] Detected PIPT I-cache on CPU1 [ 0.041669] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072766] Detected PIPT I-cache on CPU2 [ 0.072921] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102525] Detected PIPT I-cache on CPU3 [ 0.102666] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132419] Detected PIPT I-cache on CPU4 [ 0.132517] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162226] Detected PIPT I-cache on CPU5 [ 0.162388] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162809] smp: Brought up 1 node, 6 CPUs [ 0.163020] SMP: Total of 6 processors activated. [ 0.163082] CPU features: detected: Privileged Access Never [ 0.163105] CPU features: detected: LSE atomic instructions [ 0.163119] CPU features: detected: User Access Override [ 0.163132] CPU features: detected: 32-bit EL0 Support [ 0.163145] CPU features: detected: RAS Extension Support [ 0.163158] CPU features: detected: CRC32 instructions [ 0.163171] CPU features: detected: 32-bit EL1 Support [ 0.233388] CPU: All CPU(s) started at EL2 [ 0.238977] devtmpfs: initialized [ 0.284989] Registered cp15_barrier emulation handler [ 0.285102] Registered setend emulation handler [ 0.285122] KASLR enabled [ 0.285417] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285444] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286726] pinctrl core: initialized pinctrl subsystem [ 0.287714] SMBIOS 3.0.0 present. [ 0.287754] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288410] NET: Registered protocol family 16 [ 0.290371] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.290879] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291591] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291649] audit: initializing netlink subsys (disabled) [ 0.291911] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292368] thermal_sys: Registered thermal governor 'step_wise' [ 0.292375] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292393] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294691] cpuidle: using governor menu [ 0.295003] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295431] ASID allocator initialised with 32768 entries [ 0.295662] Serial: AMBA PL011 UART driver [ 0.298761] Tegra reboot handler registered. [ 0.366806] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.366939] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.367141] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.367179] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.367301] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.367340] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.367466] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.367503] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.367654] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.367691] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.369903] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.369966] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.369993] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.370018] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.370045] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.370070] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.370108] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.370137] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.370165] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.370188] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.370210] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.370233] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.370255] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.370277] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.370300] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.370322] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.370344] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.370456] mc-err: mcerr ops are set to t19x [ 0.381580] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.381602] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.381616] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.381628] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.388691] ACPI: Interpreter disabled. [ 0.389792] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.391100] iommu: Default domain type: Translated [ 0.391177] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.391573] SCSI subsystem initialized [ 0.391759] usbcore: registered new interface driver usbfs [ 0.391804] usbcore: registered new interface driver hub [ 0.391841] usbcore: registered new device driver usb [ 0.392300] mc: Linux media interface: v0.10 [ 0.392328] videodev: Linux video capture interface: v2.00 [ 0.392682] pps_core: LinuxPPS API ver. 1 registered [ 0.392697] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.392720] PTP clock support registered [ 0.392975] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.393275] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.393326] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.393962] Registered efivars operations [ 0.398729] FPGA manager framework [ 0.398829] Advanced Linux Sound Architecture Driver Initialized. [ 0.399394] Bluetooth: Core ver 2.22 [ 0.399432] NET: Registered protocol family 31 [ 0.399444] Bluetooth: HCI device and connection manager initialized [ 0.399461] Bluetooth: HCI socket layer initialized [ 0.399478] Bluetooth: L2CAP socket layer initialized [ 0.399502] Bluetooth: SCO socket layer initialized [ 0.402024] camchar: rtcpu character device driver loaded [ 0.404199] clocksource: Switched to clocksource arch_sys_counter [ 0.818862] VFS: Disk quotas dquot_6.6.0 [ 0.818961] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.819414] pnp: PnP ACPI: disabled [ 0.833493] la/ptsa driver initialized. [ 0.833653] NET: Registered protocol family 2 [ 0.833929] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.842209] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.842399] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.842780] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.843403] TCP: Hash tables configured (established 65536 bind 65536) [ 0.843541] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.843693] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.843972] NET: Registered protocol family 1 [ 0.845051] RPC: Registered named UNIX socket transport module. [ 0.845089] RPC: Registered udp transport module. [ 0.845111] RPC: Registered tcp transport module. [ 0.845133] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.845179] PCI: CLS 0 bytes, default 64 [ 0.845512] Trying to unpack rootfs image as initramfs... [ 1.113481] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.116836] Freeing initrd memory: 8196K [ 1.121661] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.121692] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.121724] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.122108] kvm [1]: IPA Size Limit: 40 bits [ 1.122646] kvm [1]: vgic interrupt IRQ9 [ 1.123194] kvm [1]: VHE mode initialized successfully [ 1.124888] Initialise system trusted keyrings [ 1.125327] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.131172] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.131954] NFS: Registering the id_resolver key type [ 1.131994] Key type id_resolver registered [ 1.132008] Key type id_legacy registered [ 1.132241] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.132267] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.132336] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.143327] NET: Registered protocol family 38 [ 1.143352] Key type asymmetric registered [ 1.143367] Asymmetric key parser 'x509' registered [ 1.143416] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.143731] io scheduler mq-deadline registered [ 1.143750] io scheduler kyber registered [ 1.149798] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.152751] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.152828] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.152899] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.153011] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.153106] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.158611] scrncapt: init (heads:4 wins:6 planes:4) [ 1.158762] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.160189] EINJ: ACPI disabled. [ 1.163512] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.163537] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.163552] tegra-pmc: ### PMC reset level: L1 [ 1.163565] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.163611] tegra-pmc: PMC Prod config success [ 1.169163] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.205785] random: fast init done [ 1.208493] printk: console [ttyTCU0] enabled [ 2.726118] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.730692] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.735463] arm-smmu 10000000.iommu: stage 1 translation [ 2.740893] arm-smmu 10000000.iommu: stage 2 translation [ 2.746534] arm-smmu 10000000.iommu: nested translation [ 2.751848] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.758765] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.769855] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.772431] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.778715] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.786531] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.791751] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.796734] arm-smmu 12000000.iommu: stage 1 translation [ 2.802242] arm-smmu 12000000.iommu: stage 2 translation [ 2.807686] arm-smmu 12000000.iommu: nested translation [ 2.813100] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.820017] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.831059] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.833394] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.839955] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.847063] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.857313] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.860076] tegra_profiler: auth: init [ 2.864674] THERMAL EST: found 3 subdevs [ 2.868021] THERMAL EST num_resources: 0 [ 2.871680] [THERMAL EST subdev 0] [ 2.875218] [THERMAL EST subdev 1] [ 2.878371] [THERMAL EST subdev 2] [ 2.881875] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.888045] THERMAL EST: thz register success. [ 2.892576] THERMAL EST: end of probe, return err: 0 [ 2.897585] nvsciipc: loaded module [ 2.904899] tun: Universal TUN/TAP device driver, 1.6 [ 2.907254] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.913644] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.918949] e1000e: Intel(R) PRO/1000 Network Driver [ 2.924154] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.929961] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.935249] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.941725] PPP generic driver version 2.4.2 [ 2.945914] PPP BSD Compression module registered [ 2.950486] PPP Deflate Compression module registered [ 2.955731] PPP MPPE Compression module registered [ 2.960485] usbcore: registered new interface driver r8152 [ 2.965998] usbcore: registered new interface driver asix [ 2.971588] usbcore: registered new interface driver ax88179_178a [ 2.977452] usbcore: registered new interface driver cdc_ether [ 2.983657] usbcore: registered new interface driver net1080 [ 2.989008] usbcore: registered new interface driver cdc_subset [ 2.995311] usbcore: registered new interface driver zaurus [ 3.000991] usbcore: registered new interface driver cdc_ncm [ 3.006669] usbcore: registered new interface driver aqc111 [ 3.012356] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.018139] ohci-pci: OHCI PCI platform driver [ 3.022451] ohci-platform: OHCI generic platform driver [ 3.028565] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.034899] usbcore: registered new interface driver uas [ 3.038994] usbcore: registered new interface driver usb-storage [ 3.045149] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.050929] mousedev: PS/2 mouse device common for all mice [ 3.055893] usbcore: registered new interface driver xpad [ 3.063833] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.066664] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.074676] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.081255] i2c /dev entries driver [ 3.084311] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.090381] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.095674] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.101088] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.106389] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.111922] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.117382] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.131522] device-mapper: uevent: version 1.0.3 [ 3.131958] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.137750] cpuidle: Initializing cpuidle driver [ 3.141880] sdhci: Secure Digital Host Controller Interface driver [ 3.146239] sdhci: Copyright(c) Pierre Ossman [ 3.150330] Synopsys Designware Multimedia Card Interface Driver [ 3.156790] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.162763] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.163517] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.175750] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.197613] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.207658] vdd-1v0: supplied by regulator-dummy [ 3.213260] vdd-1v8-hs: supplied by regulator-dummy [ 3.218082] vdd-1v8-ls: supplied by regulator-dummy [ 3.222961] vdd-1v8-ao: supplied by regulator-dummy [ 3.226910] vddio-ddr-1v1: supplied by regulator-dummy [ 3.231446] vdd-rtc: supplied by regulator-dummy [ 3.233231] spmic-ldo1: supplied by regulator-dummy [ 3.234533] vdd-ao-3v3: supplied by regulator-dummy [ 3.240688] vddio-emmc-3v3: supplied by regulator-dummy [ 3.247132] spmic-ldo4: supplied by regulator-dummy [ 3.248371] vdd-usb-3v3: supplied by regulator-dummy [ 3.254657] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.260892] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.266556] spmic-ldo8: supplied by vdd-1v8-ls [ 3.268062] gpio-510 (gpio_default): hogged as output/high [ 3.269623] gpio-511 (gpio_default): hogged as output/high [ 3.272576] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.408904] max77686-rtc max77620-rtc: registered as rtc0 [ 3.409988] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.410320] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.254141] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.255304] hid: raw HID events driver (C) Jiri Kosina [ 4.256067] usbcore: registered new interface driver usbhid [ 4.256269] usbhid: USB HID core driver [ 4.258441] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.259802] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.294243] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.368555] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.122 ms) ÿá[ 4.344296] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.344834] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.345864] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.346618] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.348056] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.348913] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.349462] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.351131] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.351388] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.354037] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.354410] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.361196] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.374549] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.381199] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.385678] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.391681] denver_knobs_init:MTS_VERSION:55637613 [ 4.403832] t19x_cache tegra-cache: probed [ 4.406913] optee: probing for conduit method. [ 4.407741] optee: revision 3.16 (65cc2218) [ 4.408792] optee: dynamic shared memory is enabled [ 4.412544] optee: initialized driver [ 4.419668] nvpmodel: initialized successfully [ 4.420461] tegra_hv: get_hvd: not initialized yet [ 4.424699] user_ivc_mempool: hypervisor not present [ 4.431413] usbcore: registered new interface driver snd-usb-audio [ 4.437446] u32 classifier [ 4.438889] input device check on [ 4.442606] Actions configured [ 4.446175] Initializing XFRM netlink socket [ 4.450819] NET: Registered protocol family 10 [ 4.457758] Segment Routing with IPv6 [ 4.458524] NET: Registered protocol family 17 [ 4.462660] NET: Registered protocol family 15 [ 4.467219] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.480840] Bluetooth: RFCOMM socket layer initialized [ 4.485293] Bluetooth: RFCOMM ver 1.11 [ 4.489344] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.494938] Bluetooth: HIDP socket layer initialized [ 4.501329] 9pnet: Installing 9P2000 support [ 4.504396] Key type dns_resolver registered [ 4.510103] registered taskstats version 1 [ 4.512824] Loading compiled-in X.509 certificates [ 4.526514] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.529050] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.538907] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.540773] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.549366] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.557683] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.672205] tegra194-pcie 14160000.pcie: Link up [ 4.675230] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.675511] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.675669] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.675909] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.676169] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.676530] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.676978] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.689986] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.690508] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.690988] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.692926] pci 0004:01:00.0: supports D1 D2 [ 4.693160] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.705326] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.705682] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.705966] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.706377] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.706621] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.706901] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.707164] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.714523] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.722734] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.733551] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.738124] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.743367] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.750395] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.761778] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.762200] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.769389] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.777936] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.893491] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.894403] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.894701] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.894878] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.895131] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.895369] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.895803] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.896632] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.917176] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.917585] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.919539] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.921100] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.922404] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.923851] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.924867] pci 0005:00:00.0: Removing from iommu group 7 [ 5.925166] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.956727] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.978239] host1x 13e10000.host1x: initialized [ 5.979984] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.980946] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.982071] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.982656] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.983706] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.984471] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.985398] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.986033] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.986932] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.993573] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.003746] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.010375] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.020696] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.027764] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.037496] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.044515] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.054445] falcon 15340000.vic: Adding to iommu group 17 [ 6.069079] falcon 15340000.vic: initialized [ 6.070186] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.075610] falcon 15380000.nvjpg: initialized [ 6.076305] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.086552] falcon 154c0000.nvenc: initialized [ 6.087153] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.096891] falcon 15a80000.nvenc1: initialized [ 6.097496] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.110130] nvdec 15480000.nvdec: initialized [ 6.110705] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.119835] nvdec 15140000.nvdec1: initialized [ 6.120488] tsec 15500000.tsec: Adding to iommu group 18 [ 6.125964] tsec 15500000.tsec: initialized [ 6.126495] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.134200] tsec 15100000.tsecb: initialized [ 6.138168] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.162485] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.174747] gpio-374 (wifi-enable): hogged as output/high [ 6.175096] gpio-431 (camera-control-output-low): hogged as output/low [ 6.175352] gpio-432 (camera-control-output-low): hogged as output/low [ 6.177236] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.179021] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.179553] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.185643] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.190826] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.196664] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.202262] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.211039] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.218334] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.229455] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.234922] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.240584] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.249680] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.258835] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.265710] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.273941] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.280011] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.289361] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.295849] pva 16000000.pva0: Adding to iommu group 22 [ 6.322114] pva 16000000.pva0: initialized [ 6.327394] pva 16800000.pva1: Adding to iommu group 23 [ 6.338641] pva 16800000.pva1: initialized [ 6.343286] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.356441] nvdla 15880000.nvdla0: initialized [ 6.357822] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.366877] nvdla 158c0000.nvdla1: initialized [ 6.371277] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.371303] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.371340] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.371656] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.371680] tegradc 15200000.display: Adding to iommu group 26 [ 6.372055] tegradccommon 15200000.display-hub: dma mapping done [ 6.374088] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.380001] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.380172] tegradc 15210000.display: Adding to iommu group 26 [ 6.380502] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.380642] generic_infoframe_type: 0x87 [ 6.380746] tegradc 15200000.display: DT parsed successfully [ 6.380849] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.385671] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.407413] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.415296] tegra_cec 3960000.tegra_cec: probed [ 6.416347] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.421125] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.431238] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.433919] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.448624] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.455539] kfuse 3830000.kfuse: initialized [ 6.462533] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.479530] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.480265] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.496567] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.503548] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.503761] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.516600] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.517439] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.525227] tegradc 15210000.display: disp0 connected to head1->sor [ 6.533980] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.538453] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.544963] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.551260] tegradc 15210000.display: DT parsed successfully [ 6.561543] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.565596] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.580230] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.599568] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.599939] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.603151] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.611826] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.620544] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.626994] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.634647] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.641699] usb usb1: Product: xHCI Host Controller [ 6.646818] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.653141] usb usb1: SerialNumber: 3610000.xhci [ 6.658844] hub 1-0:1.0: USB hub found [ 6.661549] hub 1-0:1.0: 4 ports detected [ 6.666220] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.670805] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.678418] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.686385] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.694151] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.701280] usb usb2: Product: xHCI Host Controller [ 6.706460] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.712697] usb usb2: SerialNumber: 3610000.xhci [ 6.718277] hub 2-0:1.0: USB hub found [ 6.721173] hub 2-0:1.0: 4 ports detected [ 6.759467] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.764960] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.766070] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.766274] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.780080] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.781123] tegra194-cpufreq ccplex: probed with BWMGR [ 6.782202] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.782921] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.783393] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.784735] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.796199] mmc0: CQHCI version 5.10 [ 6.798289] tegra194-vi5 15c10000.vi: initialized [ 6.799912] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.800703] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.805065] generic_infoframe_type: 0x87 [ 6.811209] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.815012] tegradc 15200000.display: DT parsed successfully [ 6.823070] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.828631] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.835331] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.835337] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.835342] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.840166] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.843021] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.844054] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.849870] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.849877] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.851143] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.856539] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.869541] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.869906] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.877069] nvethernet 2490000.ethernet: Macsec not supported [ 6.878402] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.885472] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.885653] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.893034] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.929767] mmc0: Command Queue Engine enabled [ 6.934712] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.935465] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.935470] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.937832] tegradc 15200000.display: probed [ 6.942557] mmc0: periodic cache flush enabled [ 6.949050] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.959922] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.960195] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.967060] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.970548] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.978802] tegra-se-nvhost 15810000.se: initialized [ 6.984852] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.997292] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.012719] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.014902] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.064765] Console: switching to colour frame buffer device 240x67 [ 7.065320] tegra-se-nvhost 15820000.se: initialized [ 7.070716] tegradc 15200000.display: fb registered [ 7.070782] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.077399] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.081310] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.086737] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.092680] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.099061] tegra-se-nvhost 15830000.se: initialized [ 7.116550] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.122326] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.128781] tegra-se-nvhost 15840000.se: initialized [ 7.134375] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.140604] tegra_actmon d230000.actmon: in actmon_register()... [ 7.145170] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.147649] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.151063] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.158648] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.158653] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.158661] usb 1-2: Manufacturer: Generic [ 7.167427] hvc_sysfs: hypervisor is not present [ 7.167825] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.169000] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.169008] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.169640] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.169644] Extcon AUX1(HDMI) enable [ 7.171964] tegradc 15210000.display: disp1 connected to head1->sor [ 7.172143] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.172229] tegradc 15210000.display: DT parsed successfully [ 7.172272] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.172399] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.172404] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.176034] hub 1-2:1.0: USB hub found [ 7.179074] tegradc 15210000.display: probed [ 7.184063] hub 1-2:1.0: 4 ports detected [ 7.206650] ALSA device list: [ 7.268971] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.270750] No soundcards found. [ 7.288887] tegradc 15210000.display: fb registered [ 7.297013] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.300934] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.302845] Freeing unused kernel memory: 3968K [ 7.308735] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.310035] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.310062] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.310066] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.310069] usb 2-3: Manufacturer: Generic [ 7.320926] hub 2-3:1.0: USB hub found [ 7.332325] Run /init as init process [ 7.335985] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.354682] tegradc 15200000.display: blank - powerdown [ 7.392165] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.401550] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.401554] Extcon AUX1(HDMI) disable [ 7.424854] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.425728] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.428150] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.438707] tegradc 15200000.display: unblank [ 7.439787] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.439978] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.445839] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.447735] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.451776] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.451780] Extcon AUX1(HDMI) enable [ 7.456711] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.456718] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.464493] tegradc 15200000.display: sync windows ret = 246 [ 7.495522] tegradc 15210000.display: blank - powerdown [ 7.497234] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.497238] Extcon DP: HPD disabled [ 7.497242] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.497255] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.497260] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.508548] random: crng init done [ 7.517522] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.524706] Extcon HDMI: HPD enabled [ 7.528540] tegradc 15200000.display: hdmi: plugged [ 7.566472] Root device found: mmcblk0p1 [ 7.569973] Found dev node: /dev/mmcblk0p1 [ 7.577428] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.578964] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.580439] usb 1-3: Product: Bluetooth Radio [ 7.581803] usb 1-3: Manufacturer: Realtek [ 7.583172] usb 1-3: SerialNumber: 00e04c000001 [ 7.606338] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.611814] Rootfs mounted over mmcblk0p1 [ 7.656311] Switching from initrd to actual rootfs [ 7.801227] systemd[1]: System time before build time, advancing clock. [ 7.874888] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.880005] systemd[1]: Detected architecture arm64. [ 7.927039] systemd[1]: Set hostname to . [ 8.093563] systemd-sysv-generator[244]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.440491] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.442297] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.447945] systemd[1]: Created slice system-modprobe.slice. [ 8.452917] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.457205] systemd[1]: Created slice User and Session Slice. [ 8.460807] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.465079] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.468710] systemd[1]: Reached target User and Group Name Lookups. [ 8.472261] systemd[1]: Reached target Slices. [ 8.475539] systemd[1]: Reached target Swap. [ 8.479730] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.483542] systemd[1]: Listening on Syslog Socket. [ 8.487330] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.490886] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.495305] systemd[1]: Listening on Journal Audit Socket. [ 8.499135] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.503153] systemd[1]: Listening on Journal Socket. [ 8.507172] systemd[1]: Listening on udev Control Socket. [ 8.512467] systemd[1]: Listening on udev Kernel Socket. [ 8.521880] systemd[1]: Mounting Huge Pages File System... [ 8.530720] systemd[1]: Mounting POSIX Message Queue File System... [ 8.539110] systemd[1]: Mounting RPC Pipe File System... [ 8.547755] systemd[1]: Mounting Kernel Debug File System... [ 8.556655] systemd[1]: Mounting Kernel Trace File System... [ 8.566796] systemd[1]: Starting Journal Service... [ 8.576027] systemd[1]: Starting Set the console keyboard layout... [ 8.584432] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.588052] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.594937] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.603368] systemd[1]: Started Nameserver information manager. [ 8.608761] systemd[1]: Reached target Network (Pre). [ 8.616264] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.619159] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.627169] systemd[1]: Starting Load Kernel Modules... [ 8.634949] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.644246] systemd[1]: Starting udev Coldplug all Devices... [ 8.654373] systemd[1]: Mounted Huge Pages File System. [ 8.658317] systemd[1]: Mounted POSIX Message Queue File System. [ 8.662272] systemd[1]: Mounted RPC Pipe File System. [ 8.665334] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.666314] systemd[1]: Mounted Kernel Debug File System. [ 8.671019] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.672994] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.673205] systemd[1]: Mounted Kernel Trace File System. [ 8.674562] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.674575] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.679063] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.679324] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.680968] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.683943] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.683957] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.692153] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.697206] systemd[1]: nvfb-udev.service: Succeeded. [ 8.701305] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.712224] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.717893] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.719705] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.732966] systemd[1]: Starting Load/Save Random Seed... [ 8.741582] systemd[1]: Starting Create System Users... [ 8.778807] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.778807] [ 8.798243] systemd[1]: Finished Create System Users. [ 8.807908] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.814722] systemd[1]: Finished Load Kernel Modules. [ 8.821797] systemd[1]: Finished Load/Save Random Seed. [ 8.826354] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.832950] systemd[1]: Mounting Kernel Configuration File System... [ 8.841702] systemd[1]: Started OP-TEE Client Supplicant. [ 8.850006] systemd[1]: Starting Apply Kernel Variables... [ 8.857804] systemd[1]: Mounted Kernel Configuration File System. [ 8.868465] systemd[1]: Finished Set the console keyboard layout. [ 8.875275] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.882228] systemd[1]: Reached target Local File Systems (Pre). [ 8.886228] systemd[1]: Reached target Local File Systems. [ 10.284026] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.296370] imx219 9-0010: board setup failed [ 10.296464] imx219: probe of 9-0010 failed with error -121 [ 10.311109] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.322483] imx219 10-0010: board setup failed [ 10.323805] imx219: probe of 10-0010 failed with error -121 [ 10.374822] hot-surface-alert cooling state: 0 -> 1 [ 11.295967] using random self ethernet address [ 11.307331] using random host ethernet address [ 11.806736] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.806744] Creating 1 MTD partitions on "spi6.0": [ 11.806754] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.616235] using random self ethernet address [ 12.617797] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.872917] nvidia: loading out-of-tree module taints kernel. [ 59.677591] watchdog: watchdog0: watchdog did not stop! [ 60.163894] Trying to unregister non-registered hwtime source [ 63.227639] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.229194] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [Eÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.645] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.647] I> width = 720, height = 480, frequency = 26973026 [0003.651] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.744] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000735] Console: colour dummy device 80x25 [ 0.002295] printk: console [tty0] enabled [ 0.002369] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002408] pid_max: default: 32768 minimum: 301 [ 0.002592] LSM: Security Framework initializing [ 0.002654] Yama: becoming mindful. [ 0.002724] SELinux: Initializing. [ 0.002904] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002944] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005993] rcu: Hierarchical SRCU implementation. [ 0.006266] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006982] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007038] DTB Build time: Aug 10 2022 20:31:49 [ 0.010039] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010293] Remapping and enabling EFI services. [ 0.012451] smp: Bringing up secondary CPUs ... [ 0.043856] Detected PIPT I-cache on CPU1 [ 0.043932] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073490] Detected PIPT I-cache on CPU2 [ 0.073587] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103069] Detected PIPT I-cache on CPU3 [ 0.103234] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132899] Detected PIPT I-cache on CPU4 [ 0.133000] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162529] Detected PIPT I-cache on CPU5 [ 0.162598] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162891] smp: Brought up 1 node, 6 CPUs [ 0.163104] SMP: Total of 6 processors activated. [ 0.163143] CPU features: detected: Privileged Access Never [ 0.163188] CPU features: detected: LSE atomic instructions [ 0.163201] CPU features: detected: User Access Override [ 0.163215] CPU features: detected: 32-bit EL0 Support [ 0.163228] CPU features: detected: RAS Extension Support [ 0.163240] CPU features: detected: CRC32 instructions [ 0.163253] CPU features: detected: 32-bit EL1 Support [ 0.232604] CPU: All CPU(s) started at EL2 [ 0.238544] devtmpfs: initialized [ 0.290461] Registered cp15_barrier emulation handler [ 0.290605] Registered setend emulation handler [ 0.290625] KASLR enabled [ 0.290868] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.290919] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292730] pinctrl core: initialized pinctrl subsystem [ 0.293785] SMBIOS 3.0.0 present. [ 0.293814] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294474] NET: Registered protocol family 16 [ 0.296522] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.297079] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297874] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297935] audit: initializing netlink subsys (disabled) [ 0.298233] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.298669] thermal_sys: Registered thermal governor 'step_wise' [ 0.298676] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298689] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300791] cpuidle: using governor menu [ 0.301075] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.301526] ASID allocator initialised with 32768 entries [ 0.301813] Serial: AMBA PL011 UART driver [ 0.305034] Tegra reboot handler registered. [ 0.367305] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.367441] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.367688] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.367730] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.367860] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.367899] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.368026] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.368064] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.368219] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.368256] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.370871] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.370905] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.370933] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.370959] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.370988] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.371014] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.371051] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.371081] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.371104] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.371127] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.371149] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.371172] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.371195] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.371238] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.371262] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.371285] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.371325] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.371423] mc-err: mcerr ops are set to t19x [ 0.383412] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.383435] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.383447] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.383458] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.389831] ACPI: Interpreter disabled. [ 0.391068] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.392379] iommu: Default domain type: Translated [ 0.392444] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.392827] SCSI subsystem initialized [ 0.392965] usbcore: registered new interface driver usbfs [ 0.393007] usbcore: registered new interface driver hub [ 0.393041] usbcore: registered new device driver usb [ 0.393548] mc: Linux media interface: v0.10 [ 0.393573] videodev: Linux video capture interface: v2.00 [ 0.393946] pps_core: LinuxPPS API ver. 1 registered [ 0.393958] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.393977] PTP clock support registered [ 0.394225] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.394544] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.394601] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.395381] Registered efivars operations [ 0.400450] FPGA manager framework [ 0.400574] Advanced Linux Sound Architecture Driver Initialized. [ 0.401185] Bluetooth: Core ver 2.22 [ 0.401226] NET: Registered protocol family 31 [ 0.401238] Bluetooth: HCI device and connection manager initialized [ 0.401253] Bluetooth: HCI socket layer initialized [ 0.401269] Bluetooth: L2CAP socket layer initialized [ 0.401290] Bluetooth: SCO socket layer initialized [ 0.402997] camchar: rtcpu character device driver loaded [ 0.403932] clocksource: Switched to clocksource arch_sys_counter [ 0.673503] VFS: Disk quotas dquot_6.6.0 [ 0.673615] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.673960] pnp: PnP ACPI: disabled [ 0.683816] la/ptsa driver initialized. [ 0.683990] NET: Registered protocol family 2 [ 0.684167] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.689363] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.689455] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.689778] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.690206] TCP: Hash tables configured (established 65536 bind 65536) [ 0.690329] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.690419] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.690647] NET: Registered protocol family 1 [ 0.691652] RPC: Registered named UNIX socket transport module. [ 0.691718] RPC: Registered udp transport module. [ 0.691742] RPC: Registered tcp transport module. [ 0.691764] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.691806] PCI: CLS 0 bytes, default 64 [ 0.692159] Trying to unpack rootfs image as initramfs... [ 0.883224] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.885659] Freeing initrd memory: 8196K [ 0.889751] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.889823] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.889879] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.890254] kvm [1]: IPA Size Limit: 40 bits [ 0.890812] kvm [1]: vgic interrupt IRQ9 [ 0.891310] kvm [1]: VHE mode initialized successfully [ 0.892691] Initialise system trusted keyrings [ 0.892979] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.898575] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.899403] NFS: Registering the id_resolver key type [ 0.899441] Key type id_resolver registered [ 0.899455] Key type id_legacy registered [ 0.899548] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.899573] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.899611] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.909964] NET: Registered protocol family 38 [ 0.909989] Key type asymmetric registered [ 0.910005] Asymmetric key parser 'x509' registered [ 0.910063] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.910348] io scheduler mq-deadline registered [ 0.910368] io scheduler kyber registered [ 0.916269] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.919161] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.919268] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.919346] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.919452] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.919525] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.925458] scrncapt: init (heads:4 wins:6 planes:4) [ 0.925570] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.926659] EINJ: ACPI disabled. [ 0.930304] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.930331] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.930347] tegra-pmc: ### PMC reset level: L1 [ 0.930393] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.930449] tegra-pmc: PMC Prod config success [ 0.935600] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.940529] random: fast init done [ 0.940600] printk: console [ttyTCU0] enabled [ 2.493321] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.497533] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.502159] arm-smmu 10000000.iommu: stage 1 translation [ 2.507970] arm-smmu 10000000.iommu: stage 2 translation [ 2.513116] arm-smmu 10000000.iommu: nested translation [ 2.518686] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.525860] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.536438] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.538958] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.545289] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.553349] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.558323] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.563092] arm-smmu 12000000.iommu: stage 1 translation [ 2.568816] arm-smmu 12000000.iommu: stage 2 translation [ 2.574237] arm-smmu 12000000.iommu: nested translation [ 2.579412] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.586848] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.597275] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.599696] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.606534] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.613782] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.623442] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.626796] tegra_profiler: auth: init [ 2.630984] THERMAL EST: found 3 subdevs [ 2.634622] THERMAL EST num_resources: 0 [ 2.638239] [THERMAL EST subdev 0] [ 2.641792] [THERMAL EST subdev 1] [ 2.645228] [THERMAL EST subdev 2] [ 2.648191] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.654892] THERMAL EST: thz register success. [ 2.659146] THERMAL EST: end of probe, return err: 0 [ 2.664482] nvsciipc: loaded module [ 2.671687] tun: Universal TUN/TAP device driver, 1.6 [ 2.674224] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.680231] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.685521] e1000e: Intel(R) PRO/1000 Network Driver [ 2.690707] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.696799] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.702082] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.708048] PPP generic driver version 2.4.2 [ 2.712289] PPP BSD Compression module registered [ 2.717055] PPP Deflate Compression module registered [ 2.722303] PPP MPPE Compression module registered [ 2.727365] usbcore: registered new interface driver r8152 [ 2.732606] usbcore: registered new interface driver asix [ 2.738164] usbcore: registered new interface driver ax88179_178a [ 2.744035] usbcore: registered new interface driver cdc_ether [ 2.750242] usbcore: registered new interface driver net1080 [ 2.755587] usbcore: registered new interface driver cdc_subset [ 2.761648] usbcore: registered new interface driver zaurus [ 2.767336] usbcore: registered new interface driver cdc_ncm [ 2.773003] usbcore: registered new interface driver aqc111 [ 2.778909] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.784719] ohci-pci: OHCI PCI platform driver [ 2.789028] ohci-platform: OHCI generic platform driver [ 2.794911] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.801324] usbcore: registered new interface driver uas [ 2.805313] usbcore: registered new interface driver usb-storage [ 2.811713] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.817707] mousedev: PS/2 mouse device common for all mice [ 2.822713] usbcore: registered new interface driver xpad [ 2.830507] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.833204] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.841245] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.847578] i2c /dev entries driver [ 2.850902] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.856631] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.862262] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.867667] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.872987] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.878577] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.884019] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.897652] device-mapper: uevent: version 1.0.3 [ 2.898132] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.904148] cpuidle: Initializing cpuidle driver [ 2.908342] sdhci: Secure Digital Host Controller Interface driver [ 2.913045] sdhci: Copyright(c) Pierre Ossman [ 2.917158] Synopsys Designware Multimedia Card Interface Driver [ 2.923351] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.929337] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.930153] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.942628] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.963248] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.973080] vdd-1v0: supplied by regulator-dummy [ 2.978566] vdd-1v8-hs: supplied by regulator-dummy [ 2.983486] vdd-1v8-ls: supplied by regulator-dummy [ 2.988283] vdd-1v8-ao: supplied by regulator-dummy [ 2.992265] vddio-ddr-1v1: supplied by regulator-dummy [ 2.996713] vdd-rtc: supplied by regulator-dummy [ 2.998483] spmic-ldo1: supplied by regulator-dummy [ 2.999751] vdd-ao-3v3: supplied by regulator-dummy [ 3.005934] vddio-emmc-3v3: supplied by regulator-dummy [ 3.012262] spmic-ldo4: supplied by regulator-dummy [ 3.013482] vdd-usb-3v3: supplied by regulator-dummy [ 3.019720] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.026025] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.031536] spmic-ldo8: supplied by vdd-1v8-ls [ 3.033233] gpio-510 (gpio_default): hogged as output/high [ 3.034606] gpio-511 (gpio_default): hogged as output/high [ 3.037482] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.175207] max77686-rtc max77620-rtc: registered as rtc0 [ 3.176618] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.177011] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.017615] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.019085] hid: raw HID events driver (C) Jiri Kosina [ 4.020143] usbcore: registered new interface driver usbhid [ 4.020307] usbhid: USB HID core driver [ 4.022769] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.024331] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.102740] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.176104] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.173 ms) ÿá[ 4.107808] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.108459] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.109551] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.110184] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.112092] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.112671] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.113315] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.114756] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.115057] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.117420] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.124340] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.130739] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.135749] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.141420] denver_knobs_init:MTS_VERSION:55637613 [ 4.154176] t19x_cache tegra-cache: probed [ 4.157279] optee: probing for conduit method. [ 4.158187] optee: revision 3.16 (65cc2218) [ 4.159138] optee: dynamic shared memory is enabled [ 4.162837] optee: initialized driver [ 4.169446] nvpmodel: initialized successfully [ 4.170445] tegra_hv: get_hvd: not initialized yet [ 4.174848] user_ivc_mempool: hypervisor not present [ 4.181168] usbcore: registered new interface driver snd-usb-audio [ 4.187469] u32 classifier [ 4.188857] input device check on [ 4.192619] Actions configured [ 4.195966] Initializing XFRM netlink socket [ 4.200918] NET: Registered protocol family 10 [ 4.207064] Segment Routing with IPv6 [ 4.208213] NET: Registered protocol family 17 [ 4.212703] NET: Registered protocol family 15 [ 4.216855] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.230565] Bluetooth: RFCOMM socket layer initialized [ 4.235572] Bluetooth: RFCOMM ver 1.11 [ 4.239153] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.245233] Bluetooth: HIDP socket layer initialized [ 4.251155] 9pnet: Installing 9P2000 support [ 4.254396] Key type dns_resolver registered [ 4.260374] registered taskstats version 1 [ 4.262976] Loading compiled-in X.509 certificates [ 4.274608] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.278609] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.288865] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.290656] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.299579] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.307663] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.424017] tegra194-pcie 14160000.pcie: Link up [ 4.426829] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.427044] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.427191] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.427425] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.427605] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.428031] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.428459] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.441910] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.442482] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.443036] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.444621] pci 0004:01:00.0: supports D1 D2 [ 4.444838] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.454012] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.454310] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.454569] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.454934] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.455227] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.455419] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.458940] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.466242] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.474768] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.484712] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.489694] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.494809] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.501792] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.510300] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.512553] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.520986] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.529433] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.644687] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.645278] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.645481] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.645648] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.645883] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.646095] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.646482] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.646874] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.664934] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.665377] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.667311] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.668899] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.670540] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.672384] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.673267] pci 0005:00:00.0: Removing from iommu group 7 [ 5.673535] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.708311] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.730512] host1x 13e10000.host1x: initialized [ 5.732069] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.733032] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.733963] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.734613] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.735354] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.736093] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.736861] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.737468] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.738192] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.744882] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.754552] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.762121] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.771763] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.778675] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.788564] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.795782] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.805451] falcon 15340000.vic: Adding to iommu group 17 [ 5.819668] falcon 15340000.vic: initialized [ 5.820934] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.826967] falcon 15380000.nvjpg: initialized [ 5.827711] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.839000] falcon 154c0000.nvenc: initialized [ 5.839600] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.848673] falcon 15a80000.nvenc1: initialized [ 5.849269] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.860326] nvdec 15480000.nvdec: initialized [ 5.861084] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.871046] nvdec 15140000.nvdec1: initialized [ 5.871710] tsec 15500000.tsec: Adding to iommu group 18 [ 5.877342] tsec 15500000.tsec: initialized [ 5.877803] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.885909] tsec 15100000.tsecb: initialized [ 5.890294] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.914751] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.926223] gpio-374 (wifi-enable): hogged as output/high [ 5.926509] gpio-431 (camera-control-output-low): hogged as output/low [ 5.926872] gpio-432 (camera-control-output-low): hogged as output/low [ 5.928901] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.931020] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.931633] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.937278] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.942401] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.948255] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.953685] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.962179] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.969566] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.981074] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.986597] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.992026] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.000846] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.010145] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.017504] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.024849] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.030924] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.041205] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.047358] pva 16000000.pva0: Adding to iommu group 22 [ 6.073024] pva 16000000.pva0: initialized [ 6.078172] pva 16800000.pva1: Adding to iommu group 23 [ 6.089115] pva 16800000.pva1: initialized [ 6.093768] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.106987] nvdla 15880000.nvdla0: initialized [ 6.108408] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.117229] nvdla 158c0000.nvdla1: initialized [ 6.120021] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.120087] tegradc 15200000.display: Adding to iommu group 26 [ 6.120331] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.120421] tegradccommon 15200000.display-hub: dma mapping done [ 6.128292] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.128759] generic_infoframe_type: 0x87 [ 6.129035] tegradc 15200000.display: DT parsed successfully [ 6.129341] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.136519] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.137717] tegradc 15210000.display: Adding to iommu group 26 [ 6.143319] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.163238] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.163779] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.164353] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.168875] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.174730] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.182960] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.188468] tegra_cec 3960000.tegra_cec: probed [ 6.202237] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.202266] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.207080] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.219321] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.221524] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.237132] kfuse 3830000.kfuse: initialized [ 6.242178] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.242428] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.255149] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.255306] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.262171] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.270093] tegradc 15210000.display: disp0 connected to head1->sor [ 6.275499] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.280660] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.291574] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.296768] tegradc 15210000.display: DT parsed successfully [ 6.302995] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.308249] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.318041] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.331115] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.352238] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.352615] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.354848] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.363004] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.371725] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.378700] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.385815] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.393113] usb usb1: Product: xHCI Host Controller [ 6.397742] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.404316] usb usb1: SerialNumber: 3610000.xhci [ 6.410280] hub 1-0:1.0: USB hub found [ 6.412939] hub 1-0:1.0: 4 ports detected [ 6.417548] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.422008] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.429877] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.437409] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.445192] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.452711] usb usb2: Product: xHCI Host Controller [ 6.457387] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.463918] usb usb2: SerialNumber: 3610000.xhci [ 6.469210] hub 2-0:1.0: USB hub found [ 6.472124] hub 2-0:1.0: 4 ports detected [ 6.515984] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.521748] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.523132] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.523449] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.537446] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.538463] tegra194-cpufreq ccplex: probed with BWMGR [ 6.539622] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.540471] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.540924] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.542273] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.550267] mmc0: CQHCI version 5.10 [ 6.550645] tegra194-vi5 15c10000.vi: initialized [ 6.552271] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.553150] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.555955] generic_infoframe_type: 0x87 [ 6.562648] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.566144] tegradc 15200000.display: DT parsed successfully [ 6.574245] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.580047] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.586615] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.601202] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.607471] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.614736] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.619924] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.622148] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.627880] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.628657] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.636925] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.651755] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.659652] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.665451] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.675889] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.679330] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.680294] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.680338] nvethernet 2490000.ethernet: Macsec not supported [ 6.681578] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.682804] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.682943] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.683094] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.684447] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.686674] tegra-se-nvhost 15810000.se: initialized [ 6.697261] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.709212] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.709821] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.718452] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.763998] tegradc 15200000.display: probed [ 6.770596] tegra-se-nvhost 15820000.se: initialized [ 6.787792] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.792386] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.798715] tegra-se-nvhost 15830000.se: initialized [ 6.804404] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.809796] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.816077] tegra-se-nvhost 15840000.se: initialized [ 6.822402] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.828472] tegra_actmon d230000.actmon: in actmon_register()... [ 6.832806] Console: switching to colour frame buffer device 240x67 [ 6.832953] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.838622] tegradc 15200000.display: fb registered [ 6.838705] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.844264] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.849618] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.855610] hvc_sysfs: hypervisor is not present [ 6.856848] mmc0: Command Queue Engine enabled [ 6.856853] mmc0: periodic cache flush enabled [ 6.856868] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.857357] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.857514] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.859388] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.859394] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.859398] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.859402] usb 1-2: Manufacturer: Generic [ 6.861204] hub 1-2:1.0: USB hub found [ 6.861316] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.862466] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.862618] hub 1-2:1.0: 4 ports detected [ 6.897743] ALSA device list: [ 6.949829] No soundcards found. [ 6.953580] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.963126] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.969876] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.978375] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.984744] Extcon AUX1(HDMI) enable [ 6.988450] tegradc 15210000.display: disp1 connected to head1->sor [ 6.994466] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.001546] tegradc 15210000.display: DT parsed successfully [ 7.007519] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.012823] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.015576] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.028846] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.042019] tegradc 15210000.display: probed [ 7.042354] tegradc 15210000.display: fb registered [ 7.048063] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.051974] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.052376] Freeing unused kernel memory: 3968K [ 7.059654] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.067701] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.069834] Run /init as init process [ 7.078040] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.078048] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.088890] usb 2-3: Manufacturer: Generic [ 7.097925] tegradc 15210000.display: blank - powerdown [ 7.102790] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.108728] hub 2-3:1.0: USB hub found [ 7.111170] Extcon DP: HPD disabled [ 7.117088] hub 2-3:1.0: 4 ports detected [ 7.118606] hpd: switching from state 0 (Reset) to state 1 (Check Plug) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.129722] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.129728] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.129784] tegradc 15200000.display: blank - powerdown [ 7.170602] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.170606] Extcon AUX1(HDMI) disable [ 7.180510] Root device found: mmcblk0p1 [ 7.182614] Found dev node: /dev/mmcblk0p1 [ 7.191887] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.194497] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.196101] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.199911] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.199916] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.208015] tegradc 15200000.display: unblank [ 7.209116] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.209321] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.213361] random: crng init done [ 7.215370] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.217283] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.219242] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.221359] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.221363] Extcon AUX1(HDMI) enable [ 7.223270] Rootfs mounted over mmcblk0p1 [ 7.234050] tegradc 15200000.display: sync windows ret = 247 [ 7.253881] Switching from initrd to actual rootfs [ 7.282485] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.289936] Extcon HDMI: HPD enabled [ 7.293602] tegradc 15200000.display: hdmi: plugged [ 7.341134] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.342585] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.343976] usb 1-3: Product: Bluetooth Radio [ 7.345201] usb 1-3: Manufacturer: Realtek [ 7.346436] usb 1-3: SerialNumber: 00e04c000001 [ 7.453630] systemd[1]: System time before build time, advancing clock. [ 7.528070] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.532898] systemd[1]: Detected architecture arm64. [ 7.575280] systemd[1]: Set hostname to . [ 7.738366] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.097282] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.098920] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.104401] systemd[1]: Created slice system-modprobe.slice. [ 8.108921] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.112973] systemd[1]: Created slice User and Session Slice. [ 8.116422] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.120501] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.123790] systemd[1]: Reached target User and Group Name Lookups. [ 8.126911] systemd[1]: Reached target Slices. [ 8.129964] systemd[1]: Reached target Swap. [ 8.133926] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.137493] systemd[1]: Listening on Syslog Socket. [ 8.140933] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.144205] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.148390] systemd[1]: Listening on Journal Audit Socket. [ 8.151833] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.157041] systemd[1]: Listening on Journal Socket. [ 8.162170] systemd[1]: Listening on udev Control Socket. [ 8.165653] systemd[1]: Listening on udev Kernel Socket. [ 8.174494] systemd[1]: Mounting Huge Pages File System... [ 8.183005] systemd[1]: Mounting POSIX Message Queue File System... [ 8.191360] systemd[1]: Mounting RPC Pipe File System... [ 8.200226] systemd[1]: Mounting Kernel Debug File System... [ 8.208813] systemd[1]: Mounting Kernel Trace File System... [ 8.219138] systemd[1]: Starting Journal Service... [ 8.228584] systemd[1]: Starting Set the console keyboard layout... [ 8.236914] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.240392] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.247006] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.255302] systemd[1]: Started Nameserver information manager. [ 8.260549] systemd[1]: Reached target Network (Pre). [ 8.269596] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.269802] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.276702] systemd[1]: Starting Load Kernel Modules... [ 8.285065] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.293387] systemd[1]: Starting udev Coldplug all Devices... [ 8.304242] systemd[1]: Mounted Huge Pages File System. [ 8.308091] systemd[1]: Mounted POSIX Message Queue File System. [ 8.311569] systemd[1]: Mounted RPC Pipe File System. [ 8.314648] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.315074] systemd[1]: Mounted Kernel Debug File System. [ 8.321035] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.322089] systemd[1]: Mounted Kernel Trace File System. [ 8.323278] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.325346] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.325358] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.325362] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.325573] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.325732] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.332986] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.332998] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.344209] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.351311] systemd[1]: nvfb-udev.service: Succeeded. [ 8.355732] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.368175] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.380995] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.382711] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.392577] systemd[1]: Starting Load/Save Random Seed... [ 8.401283] systemd[1]: Starting Create System Users... [ 8.420958] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.420958] [ 8.457064] systemd[1]: Finished Load/Save Random Seed. [ 8.463685] systemd[1]: Finished Load Kernel Modules. [ 8.468237] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.474971] systemd[1]: Mounting Kernel Configuration File System... [ 8.483226] systemd[1]: Started OP-TEE Client Supplicant. [ 8.491549] systemd[1]: Starting Apply Kernel Variables... [ 8.503087] systemd[1]: Finished Set the console keyboard layout. [ 8.507192] systemd[1]: Mounted Kernel Configuration File System. [ 8.517139] systemd[1]: Finished Create System Users. [ 8.525366] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.036719] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.041913] imx219 9-0010: board setup failed [ 10.043145] imx219: probe of 9-0010 failed with error -121 [ 10.058036] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.064577] imx219 10-0010: board setup failed [ 10.065867] imx219: probe of 10-0010 failed with error -121 [ 10.160606] hot-surface-alert cooling state: 0 -> 1 [ 10.899532] using random self ethernet address [ 10.909757] using random host ethernet address [ 11.743267] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.745126] Creating 1 MTD partitions on "spi6.0": [ 11.747822] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.282464] using random self ethernet address [ 12.284161] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.814078] nvidia: loading out-of-tree module taints kernel. [ 59.262524] watchdog: watchdog0: watchdog did not stop! [ 59.752878] Trying to unregister non-registered hwtime source [ 62.810897] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.812556] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timåÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.745] initializing target [0003.746] calling apps_init() [0003.747] starting app kernel_boot_app [0003.747] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000719] Console: colour dummy device 80x25 [ 0.002282] printk: console [tty0] enabled [ 0.002362] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002400] pid_max: default: 32768 minimum: 301 [ 0.002620] LSM: Security Framework initializing [ 0.002703] Yama: becoming mindful. [ 0.002770] SELinux: Initializing. [ 0.002917] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002986] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006003] rcu: Hierarchical SRCU implementation. [ 0.006268] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006963] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007007] DTB Build time: Aug 10 2022 20:31:49 [ 0.009731] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009982] Remapping and enabling EFI services. [ 0.012732] smp: Bringing up secondary CPUs ... [ 0.042171] Detected PIPT I-cache on CPU1 [ 0.042252] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073521] Detected PIPT I-cache on CPU2 [ 0.073674] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103218] Detected PIPT I-cache on CPU3 [ 0.103362] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133113] Detected PIPT I-cache on CPU4 [ 0.133212] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162982] Detected PIPT I-cache on CPU5 [ 0.163175] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163555] smp: Brought up 1 node, 6 CPUs [ 0.163764] SMP: Total of 6 processors activated. [ 0.163841] CPU features: detected: Privileged Access Never [ 0.163865] CPU features: detected: LSE atomic instructions [ 0.163896] CPU features: detected: User Access Override [ 0.163911] CPU features: detected: 32-bit EL0 Support [ 0.163925] CPU features: detected: RAS Extension Support [ 0.163938] CPU features: detected: CRC32 instructions [ 0.163953] CPU features: detected: 32-bit EL1 Support [ 0.237869] CPU: All CPU(s) started at EL2 [ 0.243637] devtmpfs: initialized [ 0.290244] Registered cp15_barrier emulation handler [ 0.290385] Registered setend emulation handler [ 0.290405] KASLR enabled [ 0.290705] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.290733] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292014] pinctrl core: initialized pinctrl subsystem [ 0.293028] SMBIOS 3.0.0 present. [ 0.293084] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.293795] NET: Registered protocol family 16 [ 0.295811] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296305] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296977] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297037] audit: initializing netlink subsys (disabled) [ 0.297260] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.297688] thermal_sys: Registered thermal governor 'step_wise' [ 0.297694] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297708] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300016] cpuidle: using governor menu [ 0.300311] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300742] ASID allocator initialised with 32768 entries [ 0.300957] Serial: AMBA PL011 UART driver [ 0.304023] Tegra reboot handler registered. [ 0.377590] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.377718] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.377932] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.377977] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.378105] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.378147] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.378258] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.378316] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.378438] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.378481] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.380522] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.380573] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.380603] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.380645] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.380675] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.380718] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.380760] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.380789] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.380814] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.380837] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.380861] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.380884] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.380907] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.380930] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.380953] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.380976] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.381005] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.381096] mc-err: mcerr ops are set to t19x [ 0.393120] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.393145] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.393167] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.393179] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.400693] ACPI: Interpreter disabled. [ 0.401790] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.402970] iommu: Default domain type: Translated [ 0.403047] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.403410] SCSI subsystem initialized [ 0.403565] usbcore: registered new interface driver usbfs [ 0.403605] usbcore: registered new interface driver hub [ 0.403637] usbcore: registered new device driver usb [ 0.404002] mc: Linux media interface: v0.10 [ 0.404029] videodev: Linux video capture interface: v2.00 [ 0.404300] pps_core: LinuxPPS API ver. 1 registered [ 0.404311] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.404333] PTP clock support registered [ 0.404542] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404854] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.404904] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.405492] Registered efivars operations [ 0.411476] FPGA manager framework [ 0.411604] Advanced Linux Sound Architecture Driver Initialized. [ 0.412254] Bluetooth: Core ver 2.22 [ 0.412292] NET: Registered protocol family 31 [ 0.412304] Bluetooth: HCI device and connection manager initialized [ 0.412319] Bluetooth: HCI socket layer initialized [ 0.412335] Bluetooth: L2CAP socket layer initialized [ 0.412355] Bluetooth: SCO socket layer initialized [ 0.413965] camchar: rtcpu character device driver loaded [ 0.414701] clocksource: Switched to clocksource arch_sys_counter [ 0.826661] VFS: Disk quotas dquot_6.6.0 [ 0.826816] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.827238] pnp: PnP ACPI: disabled [ 0.841459] la/ptsa driver initialized. [ 0.841649] NET: Registered protocol family 2 [ 0.841867] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.849854] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.850070] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.850431] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.851104] TCP: Hash tables configured (established 65536 bind 65536) [ 0.851277] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.851447] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.851700] NET: Registered protocol family 1 [ 0.852890] RPC: Registered named UNIX socket transport module. [ 0.852934] RPC: Registered udp transport module. [ 0.852955] RPC: Registered tcp transport module. [ 0.852974] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.853004] PCI: CLS 0 bytes, default 64 [ 0.853362] Trying to unpack rootfs image as initramfs... [ 1.126823] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.129922] Freeing initrd memory: 8196K [ 1.134520] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.134567] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.134615] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.135082] kvm [1]: IPA Size Limit: 40 bits [ 1.135617] kvm [1]: vgic interrupt IRQ9 [ 1.136316] kvm [1]: VHE mode initialized successfully [ 1.138151] Initialise system trusted keyrings [ 1.138494] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.146268] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.147356] NFS: Registering the id_resolver key type [ 1.147391] Key type id_resolver registered [ 1.147408] Key type id_legacy registered [ 1.147517] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.147544] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.147589] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.158919] NET: Registered protocol family 38 [ 1.158947] Key type asymmetric registered [ 1.158965] Asymmetric key parser 'x509' registered [ 1.159022] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.159311] io scheduler mq-deadline registered [ 1.159333] io scheduler kyber registered [ 1.166408] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.169803] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.169893] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.170011] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.170152] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.170235] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.176450] scrncapt: init (heads:4 wins:6 planes:4) [ 1.176488] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.177731] EINJ: ACPI disabled. [ 1.181350] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.181406] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.181424] tegra-pmc: ### PMC reset level: L1 [ 1.181462] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.181518] tegra-pmc: PMC Prod config success [ 1.187484] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.207512] random: fast init done [ 1.216438] printk: console [ttyTCU0] enabled [ 2.745525] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.750217] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.754857] arm-smmu 10000000.iommu: stage 1 translation [ 2.759965] arm-smmu 10000000.iommu: stage 2 translation [ 2.765728] arm-smmu 10000000.iommu: nested translation [ 2.770813] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.777986] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.788999] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.791115] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.797929] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.805384] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.810968] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.815759] arm-smmu 12000000.iommu: stage 1 translation [ 2.821201] arm-smmu 12000000.iommu: stage 2 translation [ 2.826370] arm-smmu 12000000.iommu: nested translation [ 2.832061] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.839234] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.850074] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.852098] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.858915] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.866057] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.875860] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.879099] tegra_profiler: auth: init [ 2.883411] THERMAL EST: found 3 subdevs [ 2.887021] THERMAL EST num_resources: 0 [ 2.890853] [THERMAL EST subdev 0] [ 2.893900] [THERMAL EST subdev 1] [ 2.897590] [THERMAL EST subdev 2] [ 2.900583] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.907381] THERMAL EST: thz register success. [ 2.911532] THERMAL EST: end of probe, return err: 0 [ 2.916611] nvsciipc: loaded module [ 2.923869] tun: Universal TUN/TAP device driver, 1.6 [ 2.926253] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.932601] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.937900] e1000e: Intel(R) PRO/1000 Network Driver [ 2.943088] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.948906] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.954489] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.960766] PPP generic driver version 2.4.2 [ 2.964634] PPP BSD Compression module registered [ 2.969453] PPP Deflate Compression module registered [ 2.974434] PPP MPPE Compression module registered [ 2.979703] usbcore: registered new interface driver r8152 [ 2.984958] usbcore: registered new interface driver asix [ 2.990596] usbcore: registered new interface driver ax88179_178a [ 2.996704] usbcore: registered new interface driver cdc_ether [ 3.002652] usbcore: registered new interface driver net1080 [ 3.008232] usbcore: registered new interface driver cdc_subset [ 3.014024] usbcore: registered new interface driver zaurus [ 3.019770] usbcore: registered new interface driver cdc_ncm [ 3.025413] usbcore: registered new interface driver aqc111 [ 3.031073] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.037092] ohci-pci: OHCI PCI platform driver [ 3.041663] ohci-platform: OHCI generic platform driver [ 3.047560] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.053592] usbcore: registered new interface driver uas [ 3.057692] usbcore: registered new interface driver usb-storage [ 3.063808] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.069840] mousedev: PS/2 mouse device common for all mice [ 3.075124] usbcore: registered new interface driver xpad [ 3.082872] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.085575] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.093638] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.100238] i2c /dev entries driver [ 3.103508] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.109287] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.114627] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.120037] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.125347] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.130948] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.136079] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.149630] device-mapper: uevent: version 1.0.3 [ 3.150036] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.156761] cpuidle: Initializing cpuidle driver [ 3.160494] sdhci: Secure Digital Host Controller Interface driver [ 3.165186] sdhci: Copyright(c) Pierre Ossman [ 3.169547] Synopsys Designware Multimedia Card Interface Driver [ 3.175740] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.181689] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.182496] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.194752] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.217250] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.227020] vdd-1v0: supplied by regulator-dummy [ 3.232536] vdd-1v8-hs: supplied by regulator-dummy [ 3.237382] vdd-1v8-ls: supplied by regulator-dummy [ 3.242263] vdd-1v8-ao: supplied by regulator-dummy [ 3.246266] vddio-ddr-1v1: supplied by regulator-dummy [ 3.250766] vdd-rtc: supplied by regulator-dummy [ 3.252630] spmic-ldo1: supplied by regulator-dummy [ 3.253938] vdd-ao-3v3: supplied by regulator-dummy [ 3.260249] vddio-emmc-3v3: supplied by regulator-dummy [ 3.266779] spmic-ldo4: supplied by regulator-dummy [ 3.268074] vdd-usb-3v3: supplied by regulator-dummy [ 3.274254] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.280543] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.286151] spmic-ldo8: supplied by vdd-1v8-ls [ 3.287795] gpio-510 (gpio_default): hogged as output/high [ 3.289146] gpio-511 (gpio_default): hogged as output/high [ 3.292079] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.427732] max77686-rtc max77620-rtc: registered as rtc0 [ 3.428800] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.429122] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.266383] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.267630] hid: raw HID events driver (C) Jiri Kosina [ 4.268461] usbcore: registered new interface driver usbhid [ 4.268598] usbhid: USB HID core driver [ 4.270541] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.272003] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.360580] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.434958] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.186 ms) ÿá[ 4.356301] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.356779] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.357899] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.358644] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.360390] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.360992] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.361548] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.362800] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.363095] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.365659] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.373013] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.379309] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.384235] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.390264] denver_knobs_init:MTS_VERSION:55637613 [ 4.403277] t19x_cache tegra-cache: probed [ 4.406060] optee: probing for conduit method. [ 4.406940] optee: revision 3.16 (65cc2218) [ 4.408023] optee: dynamic shared memory is enabled [ 4.411235] optee: initialized driver [ 4.417435] nvpmodel: initialized successfully [ 4.419095] tegra_hv: get_hvd: not initialized yet [ 4.423676] user_ivc_mempool: hypervisor not present [ 4.429405] usbcore: registered new interface driver snd-usb-audio [ 4.436222] u32 classifier [ 4.437447] input device check on [ 4.441380] Actions configured [ 4.444840] Initializing XFRM netlink socket [ 4.449839] NET: Registered protocol family 10 [ 4.456551] Segment Routing with IPv6 [ 4.456876] NET: Registered protocol family 17 [ 4.461432] NET: Registered protocol family 15 [ 4.465538] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.478969] Bluetooth: RFCOMM socket layer initialized [ 4.483788] Bluetooth: RFCOMM ver 1.11 [ 4.487936] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.493498] Bluetooth: HIDP socket layer initialized [ 4.499560] 9pnet: Installing 9P2000 support [ 4.502948] Key type dns_resolver registered [ 4.508748] registered taskstats version 1 [ 4.511635] Loading compiled-in X.509 certificates [ 4.523650] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.527479] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.537471] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.539389] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.547862] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.556504] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.670906] tegra194-pcie 14160000.pcie: Link up [ 4.673813] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.673989] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.674109] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.674305] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.674457] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.674841] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.675237] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.685666] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.686081] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.686542] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.688090] pci 0004:01:00.0: supports D1 D2 [ 4.688222] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.696561] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.696824] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.697019] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.697364] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.697585] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.699683] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.705771] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.713085] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.721419] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.731766] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.736666] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.742191] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.749225] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.758351] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.759424] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.768001] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.776543] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.881938] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.882585] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.882955] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.883182] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.883616] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.884003] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.884574] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.885097] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.904307] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.904659] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.906329] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.908040] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.909670] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.911146] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.912191] pci 0005:00:00.0: Removing from iommu group 7 [ 5.912654] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.948573] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.973328] host1x 13e10000.host1x: initialized [ 5.974958] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.975852] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.977224] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.978036] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.979502] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.980236] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.981356] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.981993] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.983113] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.983840] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.992166] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.999023] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.008819] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.016036] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.025763] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.032798] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.043130] falcon 15340000.vic: Adding to iommu group 17 [ 6.057068] falcon 15340000.vic: initialized [ 6.057993] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.063798] falcon 15380000.nvjpg: initialized [ 6.064329] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.076517] falcon 154c0000.nvenc: initialized [ 6.077105] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.085564] falcon 15a80000.nvenc1: initialized [ 6.086105] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.098802] nvdec 15480000.nvdec: initialized [ 6.099318] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.108621] nvdec 15140000.nvdec1: initialized [ 6.109103] tsec 15500000.tsec: Adding to iommu group 18 [ 6.115284] tsec 15500000.tsec: initialized [ 6.115765] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.124562] tsec 15100000.tsecb: initialized [ 6.128455] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.155449] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.167496] gpio-374 (wifi-enable): hogged as output/high [ 6.167787] gpio-431 (camera-control-output-low): hogged as output/low [ 6.168097] gpio-432 (camera-control-output-low): hogged as output/low [ 6.169914] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.171972] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.172480] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.174245] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.179745] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.185223] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.190684] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.199080] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.206676] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.218156] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.223255] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.229232] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.238103] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.247220] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.254291] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.262090] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.268236] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.278085] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.284131] pva 16000000.pva0: Adding to iommu group 22 [ 6.312623] pva 16000000.pva0: initialized [ 6.317290] pva 16800000.pva1: Adding to iommu group 23 [ 6.317647] random: crng init done [ 6.337132] pva 16800000.pva1: initialized [ 6.341717] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.355108] nvdla 15880000.nvdla0: initialized [ 6.356465] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.365305] nvdla 158c0000.nvdla1: initialized [ 6.368935] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.369341] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.369726] tegradc 15200000.display: Adding to iommu group 26 [ 6.369735] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.369765] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.370063] tegradc 15210000.display: Adding to iommu group 26 [ 6.370176] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.370678] tegradccommon 15200000.display-hub: dma mapping done [ 6.371280] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.375161] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.388763] tegra_cec 3960000.tegra_cec: probed [ 6.394097] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.401361] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.406085] kfuse 3830000.kfuse: initialized [ 6.411142] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.416778] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.423844] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.430072] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.439246] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.444576] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.453816] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.459478] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.480251] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.480681] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.482345] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.490810] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.499280] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.505827] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.513638] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.520811] usb usb1: Product: xHCI Host Controller [ 6.525522] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.532087] usb usb1: SerialNumber: 3610000.xhci [ 6.537618] hub 1-0:1.0: USB hub found [ 6.540429] hub 1-0:1.0: 4 ports detected [ 6.544988] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.550046] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.557656] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.565385] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.573273] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.580528] usb usb2: Product: xHCI Host Controller [ 6.585208] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.591480] usb usb2: SerialNumber: 3610000.xhci [ 6.596944] hub 2-0:1.0: USB hub found [ 6.599912] hub 2-0:1.0: 4 ports detected [ 6.642085] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.648346] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.649799] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.650077] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.663040] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.664139] tegra194-cpufreq ccplex: probed with BWMGR [ 6.665267] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.665709] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.666114] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.667316] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.674591] tegra194-vi5 15c10000.vi: initialized [ 6.676044] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.676758] mmc0: CQHCI version 5.10 [ 6.680161] generic_infoframe_type: 0x87 [ 6.685494] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.687622] tegradc 15200000.display: DT parsed successfully [ 6.694523] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.699942] tegradc 15200000.display: Display dc.0000000075035484 registered with id=0 [ 6.707633] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.722380] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.723761] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.728986] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.737084] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.737088] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.737399] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.743651] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.749367] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.750772] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.750779] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.750784] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.752048] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.786441] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.793737] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.801572] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.810757] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.817149] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.819348] tegradc 15200000.display: probed [ 6.851191] nvethernet 2490000.ethernet: Macsec not supported [ 6.858487] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.866116] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.870587] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.877826] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.879136] mmc0: Command Queue Engine enabled [ 6.885854] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.888829] mmc0: periodic cache flush enabled [ 6.888849] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.906544] Console: switching to colour frame buffer device 240x67 [ 6.906859] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.912198] tegradc 15200000.display: fb registered [ 6.912263] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.917303] tegra-se-nvhost 15810000.se: initialized [ 6.917335] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.922736] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.928662] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.939656] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.940493] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.940728] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.946619] tegra-se-nvhost 15820000.se: initialized [ 6.979065] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.983762] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.990230] tegra-se-nvhost 15830000.se: initialized [ 6.994310] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.995538] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.002831] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.002836] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.002840] usb 1-2: Manufacturer: Generic [ 7.005471] hub 1-2:1.0: USB hub found [ 7.009405] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.011317] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.012455] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.012463] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.013088] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.013092] Extcon AUX1(HDMI) enable [ 7.013395] tegradc 15210000.display: disp1 connected to head1->sor [ 7.013449] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.013522] tegradc 15210000.display: DT parsed successfully [ 7.013557] tegradc 15210000.display: Display dc.000000003f3423cd registered with id=1 [ 7.013677] tegradc 15210000.display: vblank syncpt # 14 for dc 1 [ 7.013683] tegradc 15210000.display: vpulse3 syncpt # 15 for dc 1 [ 7.017711] hub 1-2:1.0: 4 ports detected [ 7.020470] tegradc 15210000.display: probed [ 7.021896] tegra-se-nvhost 15840000.se: initialized [ 7.111601] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.115281] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.136901] tegradc 15210000.display: fb registered [ 7.138359] tegra_actmon d230000.actmon: in actmon_register()... [ 7.145006] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.155339] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.155344] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.163042] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.168218] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.176597] hvc_sysfs: hypervisor is not present [ 7.183219] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.194556] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.194561] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.194565] usb 2-3: Manufacturer: Generic [ 7.194788] tegradc 15200000.display: blank - powerdown [ 7.205366] hub 2-3:1.0: USB hub found [ 7.207242] hub 2-3:1.0: 4 ports detected [ 7.214154] ALSA device list: [ 7.214161] No soundcards found. [ 7.228387] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.228392] Extcon AUX1(HDMI) disable [ 7.251684] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.252541] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.264588] tegradc 15200000.display: unblank [ 7.265949] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.266143] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.271929] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.273871] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.277882] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.277885] Extcon AUX1(HDMI) enable [ 7.290658] tegradc 15200000.display: sync windows ret = 247 [ 7.290769] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.324182] tegradc 15210000.display: blank - powerdown [ 7.325592] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.325596] Extcon DP: HPD disabled [ 7.325600] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.325611] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.325616] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.352665] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.353613] Freeing unused kernel memory: 3968K [ 7.359770] Extcon HDMI: HPD enabled [ 7.359776] tegradc 15200000.display: hdmi: plugged [ 7.373050] Run /init as init process [ 7.390794] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.433284] Root device found: mmcblk0p1 [ 7.436685] Found dev node: /dev/mmcblk0p1 [ 7.455329] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.456768] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.472584] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.478162] Rootfs mounted over mmcblk0p1 [ 7.479992] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.481437] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.482859] usb 1-3: Product: Bluetooth Radio [ 7.484170] usb 1-3: Manufacturer: Realtek [ 7.485472] usb 1-3: SerialNumber: 00e04c000001 [ 7.522260] Switching from initrd to actual rootfs [ 7.666054] systemd[1]: System time before build time, advancing clock. [ 7.739592] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.744523] systemd[1]: Detected architecture arm64. [ 7.789629] systemd[1]: Set hostname to . [ 7.957120] systemd-sysv-generator[260]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.315834] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.317554] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.323167] systemd[1]: Created slice system-modprobe.slice. [ 8.327927] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.332090] systemd[1]: Created slice User and Session Slice. [ 8.335525] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.339687] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.343196] systemd[1]: Reached target User and Group Name Lookups. [ 8.346442] systemd[1]: Reached target Slices. [ 8.349584] systemd[1]: Reached target Swap. [ 8.353676] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.357424] systemd[1]: Listening on Syslog Socket. [ 8.361045] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.364513] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.368833] systemd[1]: Listening on Journal Audit Socket. [ 8.372584] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.376516] systemd[1]: Listening on Journal Socket. [ 8.380347] systemd[1]: Listening on udev Control Socket. [ 8.385487] systemd[1]: Listening on udev Kernel Socket. [ 8.394248] systemd[1]: Mounting Huge Pages File System... [ 8.405310] systemd[1]: Mounting POSIX Message Queue File System... [ 8.416747] systemd[1]: Mounting RPC Pipe File System... [ 8.426922] systemd[1]: Mounting Kernel Debug File System... [ 8.435664] systemd[1]: Mounting Kernel Trace File System... [ 8.445973] systemd[1]: Starting Journal Service... [ 8.455224] systemd[1]: Starting Set the console keyboard layout... [ 8.463286] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.466617] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.473047] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.480714] systemd[1]: Started Nameserver information manager. [ 8.486672] systemd[1]: Reached target Network (Pre). [ 8.495127] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.497288] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.505204] systemd[1]: Starting Load Kernel Modules... [ 8.513202] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.521790] systemd[1]: Starting udev Coldplug all Devices... [ 8.531837] systemd[1]: Mounted Huge Pages File System. [ 8.535785] systemd[1]: Mounted POSIX Message Queue File System. [ 8.540710] systemd[1]: Mounted RPC Pipe File System. [ 8.544183] systemd[1]: Mounted Kernel Debug File System. [ 8.547826] systemd[1]: Mounted Kernel Trace File System. [ 8.548529] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.549648] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.551576] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.553442] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.553457] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.553463] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.555218] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.555605] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.555764] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.555774] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.572151] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.577001] systemd[1]: nvfb-udev.service: Succeeded. [ 8.581252] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.590602] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.602778] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.604576] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.610908] systemd[1]: Starting Load/Save Random Seed... [ 8.620318] systemd[1]: Starting Create System Users... [ 8.655549] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.655549] [ 8.673967] systemd[1]: Finished Load/Save Random Seed. [ 8.695255] systemd[1]: Finished Load Kernel Modules. [ 8.701854] systemd[1]: Finished Create System Users. [ 8.706761] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.712928] systemd[1]: Mounting Kernel Configuration File System... [ 8.720827] systemd[1]: Started OP-TEE Client Supplicant. [ 8.728622] systemd[1]: Starting Apply Kernel Variables... [ 8.736831] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.747150] systemd[1]: Finished Set the console keyboard layout. [ 8.755772] systemd[1]: Mounted Kernel Configuration File System. [ 10.092717] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.099346] imx219 9-0010: board setup failed [ 10.100812] imx219: probe of 9-0010 failed with error -121 [ 10.124133] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.135461] imx219 10-0010: board setup failed [ 10.136971] imx219: probe of 10-0010 failed with error -121 [ 10.299515] hot-surface-alert cooling state: 0 -> 1 [ 10.593086] using random self ethernet address [ 10.594617] using random host ethernet address [ 11.709844] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.711144] Creating 1 MTD partitions on "spi6.0": [ 11.712298] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.021093] using random self ethernet address [ 12.021099] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.846543] nvidia: loading out-of-tree module taints kernel. [ 59.000272] watchdog: watchdog0: watchdog did not stop! [ 59.460368] Trying to unregister non-registered hwtime source [ 62.521288] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.522893] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR]àÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.345] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.605] W> set volts not configured for 'vdd-1v8-hs' [0003.605] I> retrieved tmds range from prod_list_hdmi_soc [0003.610] E> invalid display type [0003.611] E> cannot find any other nvdisp nodes [0003.628] I> edid read success [0003.640] I> edid read success [0003.641] I> width = 640, height = 480, frequency = 25174825 [0003.641] I> width = 1920, height = 1080, frequency = 148500000 [0003.641] I> width = 1280, height = 768, frequency = 79500000 [0003.642] I> width = 1360, height = 768, frequency = 85500000 [0003.642] I> width = 720, height = 480, frequency = 26973026 [0003.646] I> width = 720, height = 576, frequency = 26973026 [0003.652] I> width = 1280, height = 720, frequency = 74175824 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1920, height = 1080, frequency = 148351648 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 720, height = 480, frequency = 26973026 [0003.680] I> width = 720, height = 576, frequency = 26973026 [0003.686] I> width = 3840, height = 2160, frequency = 296703296 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 4096, height = 2160, frequency = 296703296 [0003.714] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.726] I> hdmi_enable, starting HDMI initialisation [0003.731] I> hdmi_enable, HDMI initialisation complete [0003.741] initializing target [0003.741] calling apps_init() [0003.742] starting app kernel_boot_app [0003.743] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000795] Console: colour dummy device 80x25 [ 0.002313] printk: console [tty0] enabled [ 0.002380] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002436] pid_max: default: 32768 minimum: 301 [ 0.002640] LSM: Security Framework initializing [ 0.002698] Yama: becoming mindful. [ 0.002741] SELinux: Initializing. [ 0.002948] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002992] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006006] rcu: Hierarchical SRCU implementation. [ 0.006253] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006986] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007021] DTB Build time: Aug 10 2022 20:31:49 [ 0.009952] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010225] Remapping and enabling EFI services. [ 0.012144] smp: Bringing up secondary CPUs ... [ 0.041394] Detected PIPT I-cache on CPU1 [ 0.041454] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073037] Detected PIPT I-cache on CPU2 [ 0.073112] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102637] Detected PIPT I-cache on CPU3 [ 0.102703] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132382] Detected PIPT I-cache on CPU4 [ 0.132485] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162245] Detected PIPT I-cache on CPU5 [ 0.162376] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162735] smp: Brought up 1 node, 6 CPUs [ 0.162984] SMP: Total of 6 processors activated. [ 0.163024] CPU features: detected: Privileged Access Never [ 0.163046] CPU features: detected: LSE atomic instructions [ 0.163059] CPU features: detected: User Access Override [ 0.163092] CPU features: detected: 32-bit EL0 Support [ 0.163106] CPU features: detected: RAS Extension Support [ 0.163118] CPU features: detected: CRC32 instructions [ 0.163131] CPU features: detected: 32-bit EL1 Support [ 0.234008] CPU: All CPU(s) started at EL2 [ 0.239695] devtmpfs: initialized [ 0.291005] Registered cp15_barrier emulation handler [ 0.291148] Registered setend emulation handler [ 0.291200] KASLR enabled [ 0.291438] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291466] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292569] pinctrl core: initialized pinctrl subsystem [ 0.293547] SMBIOS 3.0.0 present. [ 0.293576] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294284] NET: Registered protocol family 16 [ 0.296186] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296683] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297415] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297474] audit: initializing netlink subsys (disabled) [ 0.297768] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.298134] thermal_sys: Registered thermal governor 'step_wise' [ 0.298155] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298172] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300209] cpuidle: using governor menu [ 0.300494] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300848] ASID allocator initialised with 32768 entries [ 0.301047] Serial: AMBA PL011 UART driver [ 0.304389] Tegra reboot handler registered. [ 0.375795] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375946] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.376221] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376275] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376444] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376492] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376628] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.376675] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376844] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376893] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379235] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379279] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.379311] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379343] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379376] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379408] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379449] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379486] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379531] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379560] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379604] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379633] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379660] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379707] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379735] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379763] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379790] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.379887] mc-err: mcerr ops are set to t19x [ 0.390983] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391016] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.391029] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391041] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397445] ACPI: Interpreter disabled. [ 0.398763] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400157] iommu: Default domain type: Translated [ 0.400228] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400618] SCSI subsystem initialized [ 0.400764] usbcore: registered new interface driver usbfs [ 0.400804] usbcore: registered new interface driver hub [ 0.400837] usbcore: registered new device driver usb [ 0.401333] mc: Linux media interface: v0.10 [ 0.401362] videodev: Linux video capture interface: v2.00 [ 0.401689] pps_core: LinuxPPS API ver. 1 registered [ 0.401701] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401725] PTP clock support registered [ 0.401939] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.402280] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.402370] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.402982] Registered efivars operations [ 0.409707] FPGA manager framework [ 0.409811] Advanced Linux Sound Architecture Driver Initialized. [ 0.410432] Bluetooth: Core ver 2.22 [ 0.410471] NET: Registered protocol family 31 [ 0.410483] Bluetooth: HCI device and connection manager initialized [ 0.410498] Bluetooth: HCI socket layer initialized [ 0.410514] Bluetooth: L2CAP socket layer initialized [ 0.410535] Bluetooth: SCO socket layer initialized [ 0.412793] camchar: rtcpu character device driver loaded [ 0.413805] clocksource: Switched to clocksource arch_sys_counter [ 0.822249] VFS: Disk quotas dquot_6.6.0 [ 0.822365] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.822849] pnp: PnP ACPI: disabled [ 0.835919] la/ptsa driver initialized. [ 0.836092] NET: Registered protocol family 2 [ 0.836324] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.844425] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.844598] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.844974] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.845616] TCP: Hash tables configured (established 65536 bind 65536) [ 0.845841] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.845988] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.846325] NET: Registered protocol family 1 [ 0.847383] RPC: Registered named UNIX socket transport module. [ 0.847428] RPC: Registered udp transport module. [ 0.847448] RPC: Registered tcp transport module. [ 0.847468] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.847501] PCI: CLS 0 bytes, default 64 [ 0.847797] Trying to unpack rootfs image as initramfs... [ 1.115189] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.118440] Freeing initrd memory: 8196K [ 1.122943] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.122990] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.123050] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.123396] kvm [1]: IPA Size Limit: 40 bits [ 1.123991] kvm [1]: vgic interrupt IRQ9 [ 1.124548] kvm [1]: VHE mode initialized successfully [ 1.126046] Initialise system trusted keyrings [ 1.126306] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.132141] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.132927] NFS: Registering the id_resolver key type [ 1.132968] Key type id_resolver registered [ 1.132987] Key type id_legacy registered [ 1.133081] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.133141] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.133187] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.142627] NET: Registered protocol family 38 [ 1.142668] Key type asymmetric registered [ 1.142685] Asymmetric key parser 'x509' registered [ 1.142737] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.142994] io scheduler mq-deadline registered [ 1.143049] io scheduler kyber registered [ 1.148937] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.152215] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.152332] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.152446] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.152529] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.152608] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.157884] scrncapt: init (heads:4 wins:6 planes:4) [ 1.158088] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.158974] EINJ: ACPI disabled. [ 1.162648] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.162690] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.162707] tegra-pmc: ### PMC reset level: L1 [ 1.162723] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.162789] tegra-pmc: PMC Prod config success [ 1.167792] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.172512] random: fast init done [ 1.172726] printk: console [ttyTCU0] enabled [ 2.725363] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.730113] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.734257] arm-smmu 10000000.iommu: stage 1 translation [ 2.739976] arm-smmu 10000000.iommu: stage 2 translation [ 2.745257] arm-smmu 10000000.iommu: nested translation [ 2.750876] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.757795] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.767725] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.771157] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.777431] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.785714] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.790740] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.795452] arm-smmu 12000000.iommu: stage 1 translation [ 2.800730] arm-smmu 12000000.iommu: stage 2 translation [ 2.806412] arm-smmu 12000000.iommu: nested translation [ 2.811582] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.818739] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.828768] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.831866] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.838686] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.846044] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.856314] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.858915] tegra_profiler: auth: init [ 2.863206] THERMAL EST: found 3 subdevs [ 2.866778] THERMAL EST num_resources: 0 [ 2.870360] [THERMAL EST subdev 0] [ 2.873941] [THERMAL EST subdev 1] [ 2.877071] [THERMAL EST subdev 2] [ 2.880603] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.886855] THERMAL EST: thz register success. [ 2.891040] THERMAL EST: end of probe, return err: 0 [ 2.896652] nvsciipc: loaded module [ 2.904031] tun: Universal TUN/TAP device driver, 1.6 [ 2.906393] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.912104] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.917939] e1000e: Intel(R) PRO/1000 Network Driver [ 2.922594] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.928936] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.934227] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.940487] PPP generic driver version 2.4.2 [ 2.944445] PPP BSD Compression module registered [ 2.949203] PPP Deflate Compression module registered [ 2.954453] PPP MPPE Compression module registered [ 2.959205] usbcore: registered new interface driver r8152 [ 2.964981] usbcore: registered new interface driver asix [ 2.970063] usbcore: registered new interface driver ax88179_178a [ 2.976171] usbcore: registered new interface driver cdc_ether [ 2.982378] usbcore: registered new interface driver net1080 [ 2.987979] usbcore: registered new interface driver cdc_subset [ 2.993787] usbcore: registered new interface driver zaurus [ 2.999464] usbcore: registered new interface driver cdc_ncm [ 3.005134] usbcore: registered new interface driver aqc111 [ 3.010797] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.017111] ohci-pci: OHCI PCI platform driver [ 3.021148] ohci-platform: OHCI generic platform driver [ 3.027041] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.033641] usbcore: registered new interface driver uas [ 3.037714] usbcore: registered new interface driver usb-storage [ 3.043639] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.050019] mousedev: PS/2 mouse device common for all mice [ 3.054623] usbcore: registered new interface driver xpad [ 3.063018] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.065315] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.073144] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.079729] i2c /dev entries driver [ 3.083063] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.088832] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.094505] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.099931] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.105164] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.110692] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.116133] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.129833] device-mapper: uevent: version 1.0.3 [ 3.130288] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.136338] cpuidle: Initializing cpuidle driver [ 3.140691] sdhci: Secure Digital Host Controller Interface driver [ 3.144937] sdhci: Copyright(c) Pierre Ossman [ 3.149292] Synopsys Designware Multimedia Card Interface Driver [ 3.155504] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.161451] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.162163] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.174371] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.194345] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.203506] vdd-1v0: supplied by regulator-dummy [ 3.208906] vdd-1v8-hs: supplied by regulator-dummy [ 3.213616] vdd-1v8-ls: supplied by regulator-dummy [ 3.218370] vdd-1v8-ao: supplied by regulator-dummy [ 3.222139] vddio-ddr-1v1: supplied by regulator-dummy [ 3.226524] vdd-rtc: supplied by regulator-dummy [ 3.228129] spmic-ldo1: supplied by regulator-dummy [ 3.229269] vdd-ao-3v3: supplied by regulator-dummy [ 3.235409] vddio-emmc-3v3: supplied by regulator-dummy [ 3.241525] spmic-ldo4: supplied by regulator-dummy [ 3.242685] vdd-usb-3v3: supplied by regulator-dummy [ 3.248705] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.254764] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.260244] spmic-ldo8: supplied by vdd-1v8-ls [ 3.261639] gpio-510 (gpio_default): hogged as output/high [ 3.263021] gpio-511 (gpio_default): hogged as output/high [ 3.268347] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.406835] max77686-rtc max77620-rtc: registered as rtc0 [ 3.408069] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.408388] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.142856] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.144213] hid: raw HID events driver (C) Jiri Kosina [ 4.145097] usbcore: registered new interface driver usbhid [ 4.145244] usbhid: USB HID core driver [ 4.147480] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.148907] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.035004] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.108912] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.716 ms) ÿá[ 4.232899] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.233465] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.234691] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.235419] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.237260] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.238011] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.238571] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.240046] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.240263] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.242915] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.249154] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.255872] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.260561] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.266727] denver_knobs_init:MTS_VERSION:55637613 [ 4.279484] t19x_cache tegra-cache: probed [ 4.283318] optee: probing for conduit method. [ 4.284212] optee: revision 3.16 (65cc2218) [ 4.285614] optee: dynamic shared memory is enabled [ 4.288001] optee: initialized driver [ 4.295520] nvpmodel: initialized successfully [ 4.296115] tegra_hv: get_hvd: not initialized yet [ 4.299957] user_ivc_mempool: hypervisor not present [ 4.306217] usbcore: registered new interface driver snd-usb-audio [ 4.312412] u32 classifier [ 4.313680] input device check on [ 4.317472] Actions configured [ 4.321428] Initializing XFRM netlink socket [ 4.326268] NET: Registered protocol family 10 [ 4.332655] Segment Routing with IPv6 [ 4.333276] NET: Registered protocol family 17 [ 4.337850] NET: Registered protocol family 15 [ 4.342051] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.355857] Bluetooth: RFCOMM socket layer initialized [ 4.360489] Bluetooth: RFCOMM ver 1.11 [ 4.364119] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.370228] Bluetooth: HIDP socket layer initialized [ 4.375714] 9pnet: Installing 9P2000 support [ 4.379425] Key type dns_resolver registered [ 4.385201] registered taskstats version 1 [ 4.387844] Loading compiled-in X.509 certificates [ 4.400745] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.403705] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.414254] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.416021] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.424394] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.433004] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.549846] tegra194-pcie 14160000.pcie: Link up [ 4.552818] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.553262] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.553445] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.553753] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.553987] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.554377] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.554822] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.568412] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.568902] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.569456] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.571125] pci 0004:01:00.0: supports D1 D2 [ 4.571371] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.584658] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.585122] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.585370] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.586136] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.586537] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.586755] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.587011] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.591857] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.600609] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.610899] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.615299] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.621207] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.628126] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.637216] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.638550] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.646769] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.655572] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.761923] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.762546] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.762881] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.763107] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.763330] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.763623] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.764091] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.764570] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.788816] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.789117] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.791194] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.792417] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.794364] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.796134] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.797189] pci 0005:00:00.0: Removing from iommu group 7 [ 5.797463] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.834159] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.860396] host1x 13e10000.host1x: initialized [ 5.862366] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.863193] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.864496] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.865183] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.866544] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.867112] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.868213] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.868832] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.869996] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.870680] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.872110] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.878724] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.889058] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.895671] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.906024] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.912681] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.922990] falcon 15340000.vic: Adding to iommu group 17 [ 5.937940] falcon 15340000.vic: initialized [ 5.939257] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.945501] falcon 15380000.nvjpg: initialized [ 5.946371] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.956343] falcon 154c0000.nvenc: initialized [ 5.957076] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.967343] falcon 15a80000.nvenc1: initialized [ 5.968103] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.980029] nvdec 15480000.nvdec: initialized [ 5.980886] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.991763] nvdec 15140000.nvdec1: initialized [ 5.992425] tsec 15500000.tsec: Adding to iommu group 18 [ 5.998743] tsec 15500000.tsec: initialized [ 5.999396] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.004674] tsec 15100000.tsecb: initialized [ 6.009252] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.037766] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.052599] gpio-374 (wifi-enable): hogged as output/high [ 6.052939] gpio-431 (camera-control-output-low): hogged as output/low [ 6.053226] gpio-432 (camera-control-output-low): hogged as output/low [ 6.053311] random: crng init done [ 6.055314] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.057572] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.058157] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.059623] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.062818] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.068709] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.074374] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.083133] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.090115] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.101623] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.106623] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.112641] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.121458] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.130594] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.138042] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.145760] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.151788] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.161241] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.167668] pva 16000000.pva0: Adding to iommu group 22 [ 6.195399] pva 16000000.pva0: initialized [ 6.200798] pva 16800000.pva1: Adding to iommu group 23 [ 6.212584] pva 16800000.pva1: initialized [ 6.216838] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.231768] nvdla 15880000.nvdla0: initialized [ 6.233177] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.241817] nvdla 158c0000.nvdla1: initialized [ 6.246522] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.246876] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.246917] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.247038] tegradc 15200000.display: Adding to iommu group 26 [ 6.247283] tegradccommon 15200000.display-hub: dma mapping done [ 6.247482] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.249533] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.251924] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.254346] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.254373] tegradc 15210000.display: Adding to iommu group 26 [ 6.257473] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.263876] generic_infoframe_type: 0x87 [ 6.269278] tegra_cec 3960000.tegra_cec: probed [ 6.275302] tegradc 15200000.display: DT parsed successfully [ 6.280003] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.283599] tegradc 15200000.display: Display dc.000000008969997a registered with id=0 [ 6.291897] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.299539] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.303642] kfuse 3830000.kfuse: initialized [ 6.309666] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.309698] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.318830] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.323796] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.330917] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.331520] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.338874] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.340374] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.346210] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.355074] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.359855] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.364633] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.370682] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.383988] tegradc 15210000.display: disp0 connected to head1->sor [ 6.391885] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.397346] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.403135] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.410043] tegradc 15210000.display: DT parsed successfully [ 6.431130] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.437704] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.446517] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.446576] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.483604] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.491918] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.498963] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.506215] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.513426] usb usb1: Product: xHCI Host Controller [ 6.518497] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.524801] usb usb1: SerialNumber: 3610000.xhci [ 6.530723] hub 1-0:1.0: USB hub found [ 6.533398] hub 1-0:1.0: 4 ports detected [ 6.538276] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.542884] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.550220] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.557960] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.566038] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.573273] usb usb2: Product: xHCI Host Controller [ 6.578003] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.584222] usb usb2: SerialNumber: 3610000.xhci [ 6.589641] hub 2-0:1.0: USB hub found [ 6.592907] hub 2-0:1.0: 4 ports detected [ 6.639147] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.646193] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.647997] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.648240] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.661756] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.662997] tegra194-cpufreq ccplex: probed with BWMGR [ 6.664327] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.664832] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.665347] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.666552] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.674229] tegra194-vi5 15c10000.vi: initialized [ 6.675757] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.676049] generic_infoframe_type: 0x87 [ 6.676060] mmc0: CQHCI version 5.10 [ 6.677077] tegradc 15200000.display: DT parsed successfully [ 6.677244] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.677462] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.677468] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.677475] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.677480] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.677484] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.685869] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.686257] tegradc 15200000.display: Display dc.00000000b77f9382 registered with id=0 [ 6.692470] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.692479] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.755672] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.756122] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.770672] nvethernet 2490000.ethernet: Macsec not supported [ 6.770686] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.783262] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.784584] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.797836] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.801141] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.806940] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.813065] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.822264] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.827461] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.832901] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.851156] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.851930] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.859157] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.865853] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.873676] tegra-se-nvhost 15810000.se: initialized [ 6.881810] tegradc 15200000.display: probed [ 6.889281] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.895471] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.901940] tegra-se-nvhost 15820000.se: initialized [ 6.908215] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.912719] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.919298] tegra-se-nvhost 15830000.se: initialized [ 6.924478] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.929399] mmc0: Command Queue Engine enabled [ 6.930347] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.934214] mmc0: periodic cache flush enabled [ 6.941056] tegra-se-nvhost 15840000.se: initialized [ 6.944801] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.951236] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.956453] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.963750] tegra_actmon d230000.actmon: in actmon_register()... [ 6.966807] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.972714] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.985399] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.985430] Console: switching to colour frame buffer device 240x67 [ 6.986136] hvc_sysfs: hypervisor is not present [ 6.989428] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.989433] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.989437] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.989441] usb 1-2: Manufacturer: Generic [ 6.991165] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.991426] hub 1-2:1.0: USB hub found [ 6.992677] hub 1-2:1.0: 4 ports detected [ 6.993448] tegradc 15200000.display: fb registered [ 6.993520] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.028122] ALSA device list: [ 7.029901] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.036401] No soundcards found. [ 7.067797] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.106822] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.141804] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.143236] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.143479] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.143979] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.144271] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.144469] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.144481] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.144489] usb 2-3: Manufacturer: Generic [ 7.144686] Extcon AUX1(HDMI) enable [ 7.144808] tegradc 15210000.display: disp1 connected to head1->sor [ 7.146845] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.154358] tegradc 15210000.display: DT parsed successfully [ 7.155667] hub 2-3:1.0: USB hub found [ 7.159975] tegradc 15210000.display: Display dc.00000000e26c2b87 registered with id=1 [ 7.165601] hub 2-3:1.0: 4 ports detected [ 7.171983] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.181922] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.195525] tegradc 15210000.display: probed [ 7.195907] tegradc 15210000.display: fb registered [ 7.200776] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.203583] Freeing unused kernel memory: 3968K [ 7.204847] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.217099] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.222611] tegradc 15210000.display: blank - powerdown [ 7.228039] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.230034] Run /init as init process [ 7.236246] Extcon DP: HPD disabled [ 7.236257] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.242990] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.255870] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.261853] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.265850] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.275481] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.281442] tegradc 15200000.display: blank - powerdown [ 7.325479] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.325486] Extcon AUX1(HDMI) disable [ 7.334128] Root device found: mmcblk0p1 [ 7.336185] Found dev node: /dev/mmcblk0p1 [ 7.349650] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.350554] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.363669] tegradc 15200000.display: unblank [ 7.364790] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.364985] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.371193] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.373102] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.373303] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.377092] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.377097] Extcon AUX1(HDMI) enable [ 7.377371] Rootfs mounted over mmcblk0p1 [ 7.389870] tegradc 15200000.display: sync windows ret = 246 [ 7.414531] Switching from initrd to actual rootfs [ 7.420517] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.422044] Extcon HDMI: HPD enabled [ 7.423138] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.423404] tegradc 15200000.display: hdmi: plugged [ 7.426690] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.434207] usb 1-3: Product: Bluetooth Radio [ 7.438483] usb 1-3: Manufacturer: Realtek [ 7.442683] usb 1-3: SerialNumber: 00e04c000001 [ 7.570952] systemd[1]: System time before build time, advancing clock. [ 7.641464] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.646390] systemd[1]: Detected architecture arm64. [ 7.689549] systemd[1]: Set hostname to . [ 7.859744] systemd-sysv-generator[249]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.204668] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.206468] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.211967] systemd[1]: Created slice system-modprobe.slice. [ 8.216679] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.220944] systemd[1]: Created slice User and Session Slice. [ 8.224488] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.228668] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.232068] systemd[1]: Reached target User and Group Name Lookups. [ 8.235324] systemd[1]: Reached target Slices. [ 8.238569] systemd[1]: Reached target Swap. [ 8.242651] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.246383] systemd[1]: Listening on Syslog Socket. [ 8.249973] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.253402] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.257620] systemd[1]: Listening on Journal Audit Socket. [ 8.261283] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.266381] systemd[1]: Listening on Journal Socket. [ 8.270224] systemd[1]: Listening on udev Control Socket. [ 8.273852] systemd[1]: Listening on udev Kernel Socket. [ 8.285336] systemd[1]: Mounting Huge Pages File System... [ 8.297004] systemd[1]: Mounting POSIX Message Queue File System... [ 8.308529] systemd[1]: Mounting RPC Pipe File System... [ 8.318461] systemd[1]: Mounting Kernel Debug File System... [ 8.326784] systemd[1]: Mounting Kernel Trace File System... [ 8.336391] systemd[1]: Starting Journal Service... [ 8.344841] systemd[1]: Starting Set the console keyboard layout... [ 8.352958] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.356549] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.362883] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.370804] systemd[1]: Started Nameserver information manager. [ 8.375507] systemd[1]: Reached target Network (Pre). [ 8.382887] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.384748] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.392865] systemd[1]: Starting Load Kernel Modules... [ 8.400844] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.409438] systemd[1]: Starting udev Coldplug all Devices... [ 8.419280] systemd[1]: Mounted Huge Pages File System. [ 8.423042] systemd[1]: Mounted POSIX Message Queue File System. [ 8.427455] systemd[1]: Mounted RPC Pipe File System. [ 8.430853] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.431148] systemd[1]: Mounted Kernel Debug File System. [ 8.434274] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.434718] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.434723] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.434732] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.434736] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.437948] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.442019] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.445681] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.447295] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.449301] systemd[1]: Mounted Kernel Trace File System. [ 8.456195] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.462187] systemd[1]: nvfb-udev.service: Succeeded. [ 8.466283] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.476459] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.481731] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.483596] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.498161] systemd[1]: Starting Load/Save Random Seed... [ 8.506464] systemd[1]: Starting Create System Users... [ 8.543255] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.543255] [ 8.567233] systemd[1]: Finished Load/Save Random Seed. [ 8.575151] systemd[1]: Finished Load Kernel Modules. [ 8.581885] systemd[1]: Finished Create System Users. [ 8.586358] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.592647] systemd[1]: Mounting Kernel Configuration File System... [ 8.601585] systemd[1]: Started OP-TEE Client Supplicant. [ 8.610186] systemd[1]: Starting Apply Kernel Variables... [ 8.618055] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.629478] systemd[1]: Finished Set the console keyboard layout. [ 8.633886] systemd[1]: Mounted Kernel Configuration File System. [ 10.181938] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.200278] imx219 9-0010: board setup failed [ 10.200393] imx219: probe of 9-0010 failed with error -121 [ 10.212061] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.234943] imx219 10-0010: board setup failed [ 10.236319] imx219: probe of 10-0010 failed with error -121 [ 10.349640] hot-surface-alert cooling state: 0 -> 1 [ 11.258760] using random self ethernet address [ 11.267265] using random host ethernet address [ 11.606542] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.606549] Creating 1 MTD partitions on "spi6.0": [ 11.606557] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.492443] using random self ethernet address [ 12.494081] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.821938] nvidia: loading out-of-tree module taints kernel. [ 59.443364] watchdog: watchdog0: watchdog did not stop! [ 59.902609] Trying to unregister non-registered hwtime source [ 62.960188] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.962319] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0,ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized pm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.686] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.746] calling apps_init() [0003.747] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000700] Console: colour dummy device 80x25 [ 0.002214] printk: console [tty0] enabled [ 0.002313] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002349] pid_max: default: 32768 minimum: 301 [ 0.002537] LSM: Security Framework initializing [ 0.002628] Yama: becoming mindful. [ 0.002672] SELinux: Initializing. [ 0.002819] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002856] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005749] rcu: Hierarchical SRCU implementation. [ 0.006004] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006842] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006893] DTB Build time: Aug 10 2022 20:31:49 [ 0.009909] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010158] Remapping and enabling EFI services. [ 0.012357] smp: Bringing up secondary CPUs ... [ 0.041558] Detected PIPT I-cache on CPU1 [ 0.041652] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073085] Detected PIPT I-cache on CPU2 [ 0.073230] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105569] Detected PIPT I-cache on CPU3 [ 0.105707] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135388] Detected PIPT I-cache on CPU4 [ 0.135591] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165404] Detected PIPT I-cache on CPU5 [ 0.165503] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165894] smp: Brought up 1 node, 6 CPUs [ 0.166101] SMP: Total of 6 processors activated. [ 0.166165] CPU features: detected: Privileged Access Never [ 0.166205] CPU features: detected: LSE atomic instructions [ 0.166220] CPU features: detected: User Access Override [ 0.166233] CPU features: detected: 32-bit EL0 Support [ 0.166246] CPU features: detected: RAS Extension Support [ 0.166257] CPU features: detected: CRC32 instructions [ 0.166270] CPU features: detected: 32-bit EL1 Support [ 0.236599] CPU: All CPU(s) started at EL2 [ 0.244439] devtmpfs: initialized [ 0.295186] Registered cp15_barrier emulation handler [ 0.295319] Registered setend emulation handler [ 0.295339] KASLR enabled [ 0.295633] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.295662] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.296971] pinctrl core: initialized pinctrl subsystem [ 0.297837] SMBIOS 3.0.0 present. [ 0.297865] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.298522] NET: Registered protocol family 16 [ 0.300623] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.301126] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.301865] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.301925] audit: initializing netlink subsys (disabled) [ 0.302288] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.302734] thermal_sys: Registered thermal governor 'step_wise' [ 0.302741] thermal_sys: Registered thermal governor 'power_allocator' [ 0.302754] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.306199] cpuidle: using governor menu [ 0.306538] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.306989] ASID allocator initialised with 32768 entries [ 0.307225] Serial: AMBA PL011 UART driver [ 0.310668] Tegra reboot handler registered. [ 0.388792] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.388900] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.389085] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.389126] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.389278] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.389341] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.389520] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.389559] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.389675] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.389714] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.391825] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.391871] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.391899] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.391926] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.391956] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.391981] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.392014] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.392045] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.392070] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.392092] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.392114] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.392136] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.392158] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.392180] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.392202] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.392224] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.392246] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.392336] mc-err: mcerr ops are set to t19x [ 0.405709] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.405749] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.405763] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.405776] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.412222] ACPI: Interpreter disabled. [ 0.413466] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.414737] iommu: Default domain type: Translated [ 0.414824] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.415192] SCSI subsystem initialized [ 0.415351] usbcore: registered new interface driver usbfs [ 0.415397] usbcore: registered new interface driver hub [ 0.415434] usbcore: registered new device driver usb [ 0.415858] mc: Linux media interface: v0.10 [ 0.415889] videodev: Linux video capture interface: v2.00 [ 0.416215] pps_core: LinuxPPS API ver. 1 registered [ 0.416226] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.416246] PTP clock support registered [ 0.416500] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.416875] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.416966] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.417630] Registered efivars operations [ 0.425101] FPGA manager framework [ 0.425206] Advanced Linux Sound Architecture Driver Initialized. [ 0.425815] Bluetooth: Core ver 2.22 [ 0.425854] NET: Registered protocol family 31 [ 0.425866] Bluetooth: HCI device and connection manager initialized [ 0.425881] Bluetooth: HCI socket layer initialized [ 0.425897] Bluetooth: L2CAP socket layer initialized [ 0.425919] Bluetooth: SCO socket layer initialized [ 0.427610] camchar: rtcpu character device driver loaded [ 0.428560] clocksource: Switched to clocksource arch_sys_counter [ 0.758428] VFS: Disk quotas dquot_6.6.0 [ 0.758507] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.758922] pnp: PnP ACPI: disabled [ 0.771427] la/ptsa driver initialized. [ 0.771549] NET: Registered protocol family 2 [ 0.771706] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.776322] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.776391] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.776737] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.777173] TCP: Hash tables configured (established 65536 bind 65536) [ 0.777301] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.777390] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.777608] NET: Registered protocol family 1 [ 0.778310] RPC: Registered named UNIX socket transport module. [ 0.778326] RPC: Registered udp transport module. [ 0.778336] RPC: Registered tcp transport module. [ 0.778370] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.778412] PCI: CLS 0 bytes, default 64 [ 0.778638] Trying to unpack rootfs image as initramfs... [ 0.962117] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.964310] Freeing initrd memory: 8196K [ 0.969102] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.969145] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.969186] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.969645] kvm [1]: IPA Size Limit: 40 bits [ 0.970332] kvm [1]: vgic interrupt IRQ9 [ 0.970865] kvm [1]: VHE mode initialized successfully [ 0.972681] Initialise system trusted keyrings [ 0.973020] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.981023] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.982027] NFS: Registering the id_resolver key type [ 0.982071] Key type id_resolver registered [ 0.982091] Key type id_legacy registered [ 0.982196] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.982255] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.982300] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.993322] NET: Registered protocol family 38 [ 0.993348] Key type asymmetric registered [ 0.993389] Asymmetric key parser 'x509' registered [ 0.993436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.993653] io scheduler mq-deadline registered [ 0.993674] io scheduler kyber registered [ 0.999786] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.002928] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.003020] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.003095] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.003166] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.003237] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.008755] scrncapt: init (heads:4 wins:6 planes:4) [ 1.009013] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.010180] EINJ: ACPI disabled. [ 1.013579] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.013607] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.013623] tegra-pmc: ### PMC reset level: L1 [ 1.013638] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.013685] tegra-pmc: PMC Prod config success [ 1.020333] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.039988] random: fast init done [ 1.048894] printk: console [ttyTCU0] enabled [ 2.578311] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.582664] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.587261] arm-smmu 10000000.iommu: stage 1 translation [ 2.592832] arm-smmu 10000000.iommu: stage 2 translation [ 2.598233] arm-smmu 10000000.iommu: nested translation [ 2.603815] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.610738] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.621852] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.623831] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.630681] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.638318] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.643714] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.648437] arm-smmu 12000000.iommu: stage 1 translation [ 2.653691] arm-smmu 12000000.iommu: stage 2 translation [ 2.659374] arm-smmu 12000000.iommu: nested translation [ 2.664805] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.671723] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.682544] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.685101] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.691402] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.698823] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.709560] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.712170] tegra_profiler: auth: init [ 2.716491] THERMAL EST: found 3 subdevs [ 2.719513] THERMAL EST num_resources: 0 [ 2.723341] [THERMAL EST subdev 0] [ 2.726919] [THERMAL EST subdev 1] [ 2.730076] [THERMAL EST subdev 2] [ 2.733332] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.740082] THERMAL EST: thz register success. [ 2.744281] THERMAL EST: end of probe, return err: 0 [ 2.749663] nvsciipc: loaded module [ 2.757410] tun: Universal TUN/TAP device driver, 1.6 [ 2.759124] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.765359] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.770733] e1000e: Intel(R) PRO/1000 Network Driver [ 2.775841] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.781679] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.787215] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.793503] PPP generic driver version 2.4.2 [ 2.797466] PPP BSD Compression module registered [ 2.802195] PPP Deflate Compression module registered [ 2.807179] PPP MPPE Compression module registered [ 2.812198] usbcore: registered new interface driver r8152 [ 2.817716] usbcore: registered new interface driver asix [ 2.823346] usbcore: registered new interface driver ax88179_178a [ 2.829211] usbcore: registered new interface driver cdc_ether [ 2.835152] usbcore: registered new interface driver net1080 [ 2.840981] usbcore: registered new interface driver cdc_subset [ 2.846763] usbcore: registered new interface driver zaurus [ 2.852717] usbcore: registered new interface driver cdc_ncm [ 2.858123] usbcore: registered new interface driver aqc111 [ 2.863874] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.870119] ohci-pci: OHCI PCI platform driver [ 2.874147] ohci-platform: OHCI generic platform driver [ 2.880036] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.887059] usbcore: registered new interface driver uas [ 2.890724] usbcore: registered new interface driver usb-storage [ 2.896648] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.902686] mousedev: PS/2 mouse device common for all mice [ 2.907844] usbcore: registered new interface driver xpad [ 2.915762] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.918631] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.926131] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.932763] i2c /dev entries driver [ 2.936126] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.941891] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.947150] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.952830] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.957870] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.963407] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.969055] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.982990] device-mapper: uevent: version 1.0.3 [ 2.983500] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.989623] cpuidle: Initializing cpuidle driver [ 2.993549] sdhci: Secure Digital Host Controller Interface driver [ 2.997934] sdhci: Copyright(c) Pierre Ossman [ 3.002032] Synopsys Designware Multimedia Card Interface Driver [ 3.008472] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.014156] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.014997] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.027543] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.051981] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.061891] vdd-1v0: supplied by regulator-dummy [ 3.067498] vdd-1v8-hs: supplied by regulator-dummy [ 3.072394] vdd-1v8-ls: supplied by regulator-dummy [ 3.077372] vdd-1v8-ao: supplied by regulator-dummy [ 3.081449] vddio-ddr-1v1: supplied by regulator-dummy [ 3.086028] vdd-rtc: supplied by regulator-dummy [ 3.087901] spmic-ldo1: supplied by regulator-dummy [ 3.089261] vdd-ao-3v3: supplied by regulator-dummy [ 3.095535] vddio-emmc-3v3: supplied by regulator-dummy [ 3.101941] spmic-ldo4: supplied by regulator-dummy [ 3.103242] vdd-usb-3v3: supplied by regulator-dummy [ 3.109579] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.115861] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.121608] spmic-ldo8: supplied by vdd-1v8-ls [ 3.123117] gpio-510 (gpio_default): hogged as output/high [ 3.124578] gpio-511 (gpio_default): hogged as output/high [ 3.127627] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.263471] max77686-rtc max77620-rtc: registered as rtc0 [ 3.264601] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.264948] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.101536] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.102836] hid: raw HID events driver (C) Jiri Kosina [ 4.103651] usbcore: registered new interface driver usbhid [ 4.103804] usbhid: USB HID core driver [ 4.105822] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.107228] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.927978] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.002164] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.994 ms) ÿá[ 4.191483] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.192044] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.193273] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.193958] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.195534] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.196198] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.196951] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.198354] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.198604] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.200824] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.207436] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.214579] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.219142] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.225237] denver_knobs_init:MTS_VERSION:55637613 [ 4.238540] t19x_cache tegra-cache: probed [ 4.241659] optee: probing for conduit method. [ 4.242482] optee: revision 3.16 (65cc2218) [ 4.243522] optee: dynamic shared memory is enabled [ 4.246619] optee: initialized driver [ 4.253384] nvpmodel: initialized successfully [ 4.254038] tegra_hv: get_hvd: not initialized yet [ 4.258829] user_ivc_mempool: hypervisor not present [ 4.264828] usbcore: registered new interface driver snd-usb-audio [ 4.271150] u32 classifier [ 4.272797] input device check on [ 4.275975] Actions configured [ 4.280111] Initializing XFRM netlink socket [ 4.284653] NET: Registered protocol family 10 [ 4.291651] Segment Routing with IPv6 [ 4.292024] NET: Registered protocol family 17 [ 4.296531] NET: Registered protocol family 15 [ 4.300874] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.314340] Bluetooth: RFCOMM socket layer initialized [ 4.319116] Bluetooth: RFCOMM ver 1.11 [ 4.322758] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.328869] Bluetooth: HIDP socket layer initialized [ 4.334511] 9pnet: Installing 9P2000 support [ 4.338323] Key type dns_resolver registered [ 4.343755] registered taskstats version 1 [ 4.346486] Loading compiled-in X.509 certificates [ 4.359796] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.362100] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.372776] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.374640] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.383007] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.391632] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.508689] tegra194-pcie 14160000.pcie: Link up [ 4.511591] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.511809] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.511950] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.512313] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.512632] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.513155] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.513598] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.526178] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.526835] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.527359] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.529033] pci 0004:01:00.0: supports D1 D2 [ 4.529238] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.539753] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.540111] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.540401] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.541002] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.541299] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.541505] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.543198] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.550898] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.559159] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.569579] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.574307] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.580087] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.586861] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.596683] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.597323] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.605600] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.614076] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.729206] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.729793] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.730049] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.730213] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.730521] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.730881] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.731280] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.731789] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.754561] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.754963] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.757030] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.758383] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.760280] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.762355] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.763443] pci 0005:00:00.0: Removing from iommu group 7 [ 5.763734] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.800344] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.827632] host1x 13e10000.host1x: initialized [ 5.829750] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.830773] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.832269] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.833381] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.834706] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.835355] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.836369] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.837241] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.838174] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.838898] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.839826] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.846590] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.856481] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.863341] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.873233] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.880432] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.890231] falcon 15340000.vic: Adding to iommu group 17 [ 5.905263] falcon 15340000.vic: initialized [ 5.906214] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.911967] falcon 15380000.nvjpg: initialized [ 5.912709] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.923073] falcon 154c0000.nvenc: initialized [ 5.923718] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.933212] falcon 15a80000.nvenc1: initialized [ 5.933770] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.945485] nvdec 15480000.nvdec: initialized [ 5.946149] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.955803] nvdec 15140000.nvdec1: initialized [ 5.956337] tsec 15500000.tsec: Adding to iommu group 18 [ 5.962181] tsec 15500000.tsec: initialized [ 5.962690] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.970397] tsec 15100000.tsecb: initialized [ 5.975281] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.003101] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.016394] gpio-374 (wifi-enable): hogged as output/high [ 6.017019] gpio-431 (camera-control-output-low): hogged as output/low [ 6.017338] gpio-432 (camera-control-output-low): hogged as output/low [ 6.019331] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.021632] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.022272] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.024001] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.026723] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.032456] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.038401] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.047251] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.054099] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.065523] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.070485] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.076483] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.085135] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.094601] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.101802] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.109564] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.115421] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.125446] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.131331] pva 16000000.pva0: Adding to iommu group 22 [ 6.159645] pva 16000000.pva0: initialized [ 6.165393] pva 16800000.pva1: Adding to iommu group 23 [ 6.177615] pva 16800000.pva1: initialized [ 6.182444] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.195973] nvdla 15880000.nvdla0: initialized [ 6.197504] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.206384] nvdla 158c0000.nvdla1: initialized [ 6.209755] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.210080] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.210396] tegradccommon 15200000.display-hub: dma mapping done [ 6.211564] tegradc 15200000.display: Adding to iommu group 26 [ 6.211701] tegradc 15210000.display: Adding to iommu group 26 [ 6.221306] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.221635] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.222172] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.222628] generic_infoframe_type: 0x87 [ 6.225620] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.225891] tegradc 15200000.display: DT parsed successfully [ 6.232057] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.237348] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.243142] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.255161] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.256626] tegra_cec 3960000.tegra_cec: probed [ 6.264937] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.270391] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.277573] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.278796] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.294012] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.297529] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.304729] kfuse 3830000.kfuse: initialized [ 6.311903] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.315523] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.329870] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.332171] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.340118] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.345948] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.355223] tegradc 15210000.display: disp0 connected to head1->sor [ 6.359466] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.365366] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.375739] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.381267] tegradc 15210000.display: DT parsed successfully [ 6.387579] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.392471] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.410357] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.415730] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.436277] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.436809] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.438969] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.447302] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.455971] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.462958] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.470027] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.477303] usb usb1: Product: xHCI Host Controller [ 6.482214] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.488512] usb usb1: SerialNumber: 3610000.xhci [ 6.494263] hub 1-0:1.0: USB hub found [ 6.497402] hub 1-0:1.0: 4 ports detected [ 6.501892] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.506474] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.514340] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.522128] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.529690] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.536976] usb usb2: Product: xHCI Host Controller [ 6.542143] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.548354] usb usb2: SerialNumber: 3610000.xhci [ 6.553798] hub 2-0:1.0: USB hub found [ 6.556908] hub 2-0:1.0: 4 ports detected [ 6.601434] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.607753] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.609607] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.609804] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.623644] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.624745] tegra194-cpufreq ccplex: probed with BWMGR [ 6.626074] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.626548] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.627009] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.628447] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.635263] tegra194-vi5 15c10000.vi: initialized [ 6.636802] tegradc 15210000.display: disp0 connected to head1->sor [ 6.637133] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.637726] mmc0: CQHCI version 5.10 [ 6.641398] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.641624] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.641630] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.641637] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.641642] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.641647] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.643859] tegradc 15210000.display: DT parsed successfully [ 6.648633] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.653991] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.654093] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.661920] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.661927] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.728432] generic_infoframe_type: 0x87 [ 6.731988] tegradc 15200000.display: DT parsed successfully [ 6.733728] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.737852] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.754084] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.754931] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.769115] nvethernet 2490000.ethernet: Macsec not supported [ 6.769119] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.769126] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.791222] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.798194] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.798459] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.806958] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.812397] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.818354] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.824227] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.831416] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.843216] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.850584] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.856457] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.858728] tegradc 15200000.display: probed [ 6.864509] tegra-se-nvhost 15810000.se: initialized [ 6.885259] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.886237] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.893591] tegra-se-nvhost 15820000.se: initialized [ 6.899436] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.903982] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.910428] tegra-se-nvhost 15830000.se: initialized [ 6.915691] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.921334] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.927408] Console: switching to colour frame buffer device 240x67 [ 6.928239] tegra-se-nvhost 15840000.se: initialized [ 6.931984] mmc0: Command Queue Engine enabled [ 6.931989] mmc0: periodic cache flush enabled [ 6.932006] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.932526] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.932753] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.932936] tegradc 15200000.display: fb registered [ 6.936432] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.939800] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.942161] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.948324] tegra_actmon d230000.actmon: in actmon_register()... [ 6.954056] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.958107] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.965306] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.970060] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.021919] hvc_sysfs: hypervisor is not present [ 7.030704] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.034049] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.041163] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.045882] usb 1-2: Manufacturer: Generic [ 7.052306] hub 1-2:1.0: USB hub found [ 7.055014] hub 1-2:1.0: 4 ports detected [ 7.067287] random: crng init done [ 7.075224] ALSA device list: [ 7.075338] No soundcards found. [ 7.078861] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.080160] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.084836] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.093567] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.100118] Extcon AUX1(HDMI) enable [ 7.103761] tegradc 15210000.display: disp1 connected to head1->sor [ 7.109932] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.116736] tegradc 15210000.display: DT parsed successfully [ 7.122290] tegradc 15210000.display: Display dc.000000004e5812cb registered with id=1 [ 7.130647] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.136617] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.149336] tegradc 15210000.display: probed [ 7.149446] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.154750] tegradc 15210000.display: fb registered [ 7.162810] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.166979] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.169038] Freeing unused kernel memory: 3968K [ 7.174527] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.184793] tegradc 15210000.display: blank - powerdown [ 7.189908] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.196847] Run /init as init process [ 7.198380] Extcon DP: HPD disabled [ 7.205627] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.212295] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.212304] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.219742] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.219748] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.219752] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.219756] usb 2-3: Manufacturer: Generic [ 7.230389] hub 2-3:1.0: USB hub found ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.253294] tegradc 15200000.display: blank - powerdown [ 7.255131] hub 2-3:1.0: 4 ports detected [ 7.268596] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.295908] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.295912] Extcon AUX1(HDMI) disable [ 7.319225] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.320226] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.320590] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.333159] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.333164] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.333397] tegradc 15200000.display: unblank [ 7.334512] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.334703] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.340401] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.342286] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.346319] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.346323] Extcon AUX1(HDMI) enable [ 7.359042] tegradc 15200000.display: sync windows ret = 247 [ 7.388040] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.389632] Extcon HDMI: HPD enabled [ 7.391003] tegradc 15200000.display: hdmi: plugged [ 7.439123] Root device found: mmcblk0p1 [ 7.442542] Found dev node: /dev/mmcblk0p1 [ 7.473771] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.475321] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.476832] usb 1-3: Product: Bluetooth Radio [ 7.478217] usb 1-3: Manufacturer: Realtek [ 7.479551] usb 1-3: SerialNumber: 00e04c000001 [ 7.482999] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.488494] Rootfs mounted over mmcblk0p1 [ 7.524013] Switching from initrd to actual rootfs [ 7.665390] systemd[1]: System time before build time, advancing clock. [ 7.733438] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.738442] systemd[1]: Detected architecture arm64. [ 7.776255] systemd[1]: Set hostname to . [ 7.935824] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.284453] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.286208] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.291728] systemd[1]: Created slice system-modprobe.slice. [ 8.296422] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.300607] systemd[1]: Created slice User and Session Slice. [ 8.304071] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.308227] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.311844] systemd[1]: Reached target User and Group Name Lookups. [ 8.315157] systemd[1]: Reached target Slices. [ 8.318365] systemd[1]: Reached target Swap. [ 8.322472] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.326125] systemd[1]: Listening on Syslog Socket. [ 8.329776] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.333262] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.337615] systemd[1]: Listening on Journal Audit Socket. [ 8.341255] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.345121] systemd[1]: Listening on Journal Socket. [ 8.348914] systemd[1]: Listening on udev Control Socket. [ 8.352448] systemd[1]: Listening on udev Kernel Socket. [ 8.362627] systemd[1]: Mounting Huge Pages File System... [ 8.372810] systemd[1]: Mounting POSIX Message Queue File System... [ 8.381155] systemd[1]: Mounting RPC Pipe File System... [ 8.389904] systemd[1]: Mounting Kernel Debug File System... [ 8.398716] systemd[1]: Mounting Kernel Trace File System... [ 8.408844] systemd[1]: Starting Journal Service... [ 8.417894] systemd[1]: Starting Set the console keyboard layout... [ 8.426154] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.429786] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.436310] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.444513] systemd[1]: Started Nameserver information manager. [ 8.449518] systemd[1]: Reached target Network (Pre). [ 8.456831] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.459019] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.465826] systemd[1]: Starting Load Kernel Modules... [ 8.474135] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.482336] systemd[1]: Starting udev Coldplug all Devices... [ 8.494138] systemd[1]: Mounted Huge Pages File System. [ 8.498128] systemd[1]: Mounted POSIX Message Queue File System. [ 8.502436] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.503034] systemd[1]: Mounted RPC Pipe File System. [ 8.509552] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.510372] systemd[1]: Mounted Kernel Debug File System. [ 8.511496] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.514254] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.514266] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.514270] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.514457] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.514704] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.514852] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.514860] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.527988] systemd[1]: Mounted Kernel Trace File System. [ 8.534618] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.539681] systemd[1]: nvfb-udev.service: Succeeded. [ 8.544634] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.557132] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.569968] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.571872] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.579234] systemd[1]: Starting Load/Save Random Seed... [ 8.588129] systemd[1]: Starting Create System Users... [ 8.607921] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.607921] [ 8.644743] systemd[1]: Finished Load Kernel Modules. [ 8.651465] systemd[1]: Finished Load/Save Random Seed. [ 8.656743] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.663604] systemd[1]: Mounting Kernel Configuration File System... [ 8.672403] systemd[1]: Started OP-TEE Client Supplicant. [ 8.681187] systemd[1]: Starting Apply Kernel Variables... [ 8.691406] systemd[1]: Finished Set the console keyboard layout. [ 8.695692] systemd[1]: Mounted Kernel Configuration File System. [ 8.709432] systemd[1]: Finished Create System Users. [ 10.064633] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.071828] imx219 9-0010: board setup failed [ 10.073304] imx219: probe of 9-0010 failed with error -121 [ 10.097264] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.103821] imx219 10-0010: board setup failed [ 10.105353] imx219: probe of 10-0010 failed with error -121 [ 10.245905] hot-surface-alert cooling state: 0 -> 1 [ 10.536403] using random self ethernet address [ 10.572605] using random host ethernet address [ 11.966612] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.968307] Creating 1 MTD partitions on "spi6.0": [ 11.970095] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.222893] using random self ethernet address [ 12.224622] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.859460] nvidia: loading out-of-tree module taints kernel. [ 59.230274] watchdog: watchdog0: watchdog did not stop! [ 59.705454] Trying to unregister non-registered hwtime source [ 62.767712] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.769426] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.905] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.323] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.480] I> register 'maxim' power off handle [0003.482] I> virtual i2c enabled [0003.482] I> registered 'maxim,max20024' pmic [0003.483] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.606] I> retrieved tmds range from prod_list_hdmi_soc [0003.611] E> invalid display type [0003.612] E> cannot find any other nvdisp nodes [0003.628] I> edid read success [0003.641] I> edid read success [0003.641] I> width = 640, height = 480, frequency = 25174825 [0003.641] I> width = 1920, height = 1080, frequency = 148500000 [0003.642] I> width = 1280, height = 768, frequency = 79500000 [0003.642] I> width = 1360, height = 768, frequency = 85500000 [0003.643] I> width = 720, height = 480, frequency = 26973026 [0003.647] I> width = 720, height = 576, frequency = 26973026 [0003.652] I> width = 1280, height = 720, frequency = 74175824 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1920, height = 1080, frequency = 148351648 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 720, height = 480, frequency = 26973026 [0003.680] I> width = 720, height = 576, frequency = 26973026 [0003.686] I> width = 3840, height = 2160, frequency = 296703296 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 4096, height = 2160, frequency = 296703296 [0003.715] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.726] I> hdmi_enable, starting HDMI initialisation [0003.731] I> hdmi_enable, HDMI initialisation complete [0003.740] initializing target [0003.741] calling apps_init() [0003.741] starting app kernel_boot_app [0003.742] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000675] Console: colour dummy device 80x25 [ 0.002001] printk: console [tty0] enabled [ 0.002069] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002103] pid_max: default: 32768 minimum: 301 [ 0.002278] LSM: Security Framework initializing [ 0.002335] Yama: becoming mindful. [ 0.002375] SELinux: Initializing. [ 0.002596] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002634] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005523] rcu: Hierarchical SRCU implementation. [ 0.005752] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006493] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006567] DTB Build time: Aug 10 2022 20:31:49 [ 0.009300] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009530] Remapping and enabling EFI services. [ 0.011840] smp: Bringing up secondary CPUs ... [ 0.040980] Detected PIPT I-cache on CPU1 [ 0.041115] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070636] Detected PIPT I-cache on CPU2 [ 0.070776] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100379] Detected PIPT I-cache on CPU3 [ 0.100565] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130302] Detected PIPT I-cache on CPU4 [ 0.130454] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160137] Detected PIPT I-cache on CPU5 [ 0.160288] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160667] smp: Brought up 1 node, 6 CPUs [ 0.160837] SMP: Total of 6 processors activated. [ 0.160939] CPU features: detected: Privileged Access Never [ 0.160963] CPU features: detected: LSE atomic instructions [ 0.160976] CPU features: detected: User Access Override [ 0.160989] CPU features: detected: 32-bit EL0 Support [ 0.161001] CPU features: detected: RAS Extension Support [ 0.161012] CPU features: detected: CRC32 instructions [ 0.161025] CPU features: detected: 32-bit EL1 Support [ 0.230504] CPU: All CPU(s) started at EL2 [ 0.237038] devtmpfs: initialized [ 0.307611] Registered cp15_barrier emulation handler [ 0.307787] Registered setend emulation handler [ 0.307823] KASLR enabled [ 0.308100] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.308135] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.310162] pinctrl core: initialized pinctrl subsystem [ 0.311267] SMBIOS 3.0.0 present. [ 0.311308] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.312197] NET: Registered protocol family 16 [ 0.314623] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.314807] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.315300] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.315401] audit: initializing netlink subsys (disabled) [ 0.315732] audit: type=2000 audit(0.312:1): state=initialized audit_enabled=0 res=1 [ 0.316176] thermal_sys: Registered thermal governor 'step_wise' [ 0.316184] thermal_sys: Registered thermal governor 'power_allocator' [ 0.316208] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.319181] cpuidle: using governor menu [ 0.319700] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.320173] ASID allocator initialised with 32768 entries [ 0.320576] Serial: AMBA PL011 UART driver [ 0.324025] Tegra reboot handler registered. [ 0.392527] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.392633] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.392827] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.392870] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.393010] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.393075] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.393223] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.393263] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.393379] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.393419] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.395903] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.395936] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.395965] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.395992] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.396020] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.396046] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.396083] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.396123] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.396158] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.396182] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.396206] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.396229] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.396253] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.396276] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.396299] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.396341] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.396366] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.396471] mc-err: mcerr ops are set to t19x [ 0.408395] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.408422] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.408435] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.408447] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.416914] ACPI: Interpreter disabled. [ 0.418911] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.420857] iommu: Default domain type: Translated [ 0.420967] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.421457] SCSI subsystem initialized [ 0.421692] usbcore: registered new interface driver usbfs [ 0.421779] usbcore: registered new interface driver hub [ 0.421830] usbcore: registered new device driver usb [ 0.422563] mc: Linux media interface: v0.10 [ 0.422614] videodev: Linux video capture interface: v2.00 [ 0.423143] pps_core: LinuxPPS API ver. 1 registered [ 0.423165] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.423205] PTP clock support registered [ 0.423546] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.423949] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.424046] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.424844] Registered efivars operations [ 0.431847] FPGA manager framework [ 0.431992] Advanced Linux Sound Architecture Driver Initialized. [ 0.432701] Bluetooth: Core ver 2.22 [ 0.432751] NET: Registered protocol family 31 [ 0.432768] Bluetooth: HCI device and connection manager initialized [ 0.432789] Bluetooth: HCI socket layer initialized [ 0.432807] Bluetooth: L2CAP socket layer initialized [ 0.432851] Bluetooth: SCO socket layer initialized [ 0.434945] camchar: rtcpu character device driver loaded [ 0.435697] clocksource: Switched to clocksource arch_sys_counter [ 0.866092] VFS: Disk quotas dquot_6.6.0 [ 0.866240] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.866613] pnp: PnP ACPI: disabled [ 0.879983] la/ptsa driver initialized. [ 0.880180] NET: Registered protocol family 2 [ 0.880398] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.888956] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.889048] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.889418] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.890058] TCP: Hash tables configured (established 65536 bind 65536) [ 0.890200] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.890329] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.890657] NET: Registered protocol family 1 [ 0.891672] RPC: Registered named UNIX socket transport module. [ 0.891743] RPC: Registered udp transport module. [ 0.891760] RPC: Registered tcp transport module. [ 0.891774] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.891801] PCI: CLS 0 bytes, default 64 [ 0.892091] Trying to unpack rootfs image as initramfs... [ 1.155679] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.158686] Freeing initrd memory: 8196K [ 1.162606] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.162646] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.162692] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.162976] kvm [1]: IPA Size Limit: 40 bits [ 1.163457] kvm [1]: vgic interrupt IRQ9 [ 1.164043] kvm [1]: VHE mode initialized successfully [ 1.165378] Initialise system trusted keyrings [ 1.165688] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.171023] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.171863] NFS: Registering the id_resolver key type [ 1.171920] Key type id_resolver registered [ 1.171935] Key type id_legacy registered [ 1.172043] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.172071] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.172119] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.181380] NET: Registered protocol family 38 [ 1.181402] Key type asymmetric registered [ 1.181446] Asymmetric key parser 'x509' registered [ 1.181495] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.181734] io scheduler mq-deadline registered [ 1.181754] io scheduler kyber registered [ 1.187441] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.190478] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.190675] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.190796] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.190901] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.190979] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.196417] scrncapt: init (heads:4 wins:6 planes:4) [ 1.196525] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.197600] EINJ: ACPI disabled. [ 1.201142] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.201172] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.201188] tegra-pmc: ### PMC reset level: L1 [ 1.201202] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.201267] tegra-pmc: PMC Prod config success [ 1.206273] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.211553] random: fast init done [ 1.212249] printk: console [ttyTCU0] enabled [ 2.764389] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.768369] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.772904] arm-smmu 10000000.iommu: stage 1 translation [ 2.778664] arm-smmu 10000000.iommu: stage 2 translation [ 2.783996] arm-smmu 10000000.iommu: nested translation [ 2.789536] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.796447] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.806693] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.809817] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.816120] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.824071] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.829158] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.834140] arm-smmu 12000000.iommu: stage 1 translation [ 2.839394] arm-smmu 12000000.iommu: stage 2 translation [ 2.845076] arm-smmu 12000000.iommu: nested translation [ 2.850285] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.857426] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.867192] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.870804] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.877108] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.884761] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.894309] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.897767] tegra_profiler: auth: init [ 2.901764] THERMAL EST: found 3 subdevs [ 2.905461] THERMAL EST num_resources: 0 [ 2.909079] [THERMAL EST subdev 0] [ 2.912651] [THERMAL EST subdev 1] [ 2.916038] [THERMAL EST subdev 2] [ 2.919029] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.925526] THERMAL EST: thz register success. [ 2.929725] THERMAL EST: end of probe, return err: 0 [ 2.935315] nvsciipc: loaded module [ 2.942524] tun: Universal TUN/TAP device driver, 1.6 [ 2.945038] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.950806] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.956602] e1000e: Intel(R) PRO/1000 Network Driver [ 2.961280] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.967642] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.972921] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.979202] PPP generic driver version 2.4.2 [ 2.983108] PPP BSD Compression module registered [ 2.987885] PPP Deflate Compression module registered [ 2.993131] PPP MPPE Compression module registered [ 2.997900] usbcore: registered new interface driver r8152 [ 3.003658] usbcore: registered new interface driver asix [ 3.008994] usbcore: registered new interface driver ax88179_178a [ 3.015114] usbcore: registered new interface driver cdc_ether [ 3.020821] usbcore: registered new interface driver net1080 [ 3.026415] usbcore: registered new interface driver cdc_subset [ 3.032715] usbcore: registered new interface driver zaurus [ 3.038402] usbcore: registered new interface driver cdc_ncm [ 3.044082] usbcore: registered new interface driver aqc111 [ 3.049486] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.055792] ohci-pci: OHCI PCI platform driver [ 3.059860] ohci-platform: OHCI generic platform driver [ 3.065987] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.072301] usbcore: registered new interface driver uas [ 3.076395] usbcore: registered new interface driver usb-storage [ 3.082269] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.088287] mousedev: PS/2 mouse device common for all mice [ 3.093547] usbcore: registered new interface driver xpad [ 3.101271] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.104312] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.112068] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.118336] i2c /dev entries driver [ 3.121720] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.127530] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.132791] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.138196] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.143518] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.149385] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.154756] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.168336] device-mapper: uevent: version 1.0.3 [ 3.168768] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.175040] cpuidle: Initializing cpuidle driver [ 3.179165] sdhci: Secure Digital Host Controller Interface driver [ 3.183903] sdhci: Copyright(c) Pierre Ossman [ 3.187736] Synopsys Designware Multimedia Card Interface Driver [ 3.194220] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.200272] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.201065] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.213754] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.235919] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.245616] vdd-1v0: supplied by regulator-dummy [ 3.251128] vdd-1v8-hs: supplied by regulator-dummy [ 3.255952] vdd-1v8-ls: supplied by regulator-dummy [ 3.260893] vdd-1v8-ao: supplied by regulator-dummy [ 3.264793] vddio-ddr-1v1: supplied by regulator-dummy [ 3.269267] vdd-rtc: supplied by regulator-dummy [ 3.271012] spmic-ldo1: supplied by regulator-dummy [ 3.272227] vdd-ao-3v3: supplied by regulator-dummy [ 3.278509] vddio-emmc-3v3: supplied by regulator-dummy [ 3.284854] spmic-ldo4: supplied by regulator-dummy [ 3.286115] vdd-usb-3v3: supplied by regulator-dummy [ 3.292326] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.298528] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.304109] spmic-ldo8: supplied by vdd-1v8-ls [ 3.305601] gpio-510 (gpio_default): hogged as output/high [ 3.307024] gpio-511 (gpio_default): hogged as output/high [ 3.310040] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.446249] max77686-rtc max77620-rtc: registered as rtc0 [ 3.447725] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.448113] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.272689] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.273902] hid: raw HID events driver (C) Jiri Kosina [ 4.274850] usbcore: registered new interface driver usbhid [ 4.275006] usbhid: USB HID core driver [ 4.277187] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.278642] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.340903] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.414974] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.777 ms, total boot 74.877 ms) ÿá[ 4.362888] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.363477] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.364505] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.365214] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.366773] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.367478] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.368115] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.369217] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.369492] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.371956] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.379222] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.385819] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.390590] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.396666] denver_knobs_init:MTS_VERSION:55637613 [ 4.409058] t19x_cache tegra-cache: probed [ 4.411901] optee: probing for conduit method. [ 4.412708] optee: revision 3.16 (65cc2218) [ 4.413671] optee: dynamic shared memory is enabled [ 4.417939] optee: initialized driver [ 4.425045] nvpmodel: initialized successfully [ 4.425642] tegra_hv: get_hvd: not initialized yet [ 4.429964] user_ivc_mempool: hypervisor not present [ 4.436361] usbcore: registered new interface driver snd-usb-audio [ 4.442493] u32 classifier [ 4.444053] input device check on [ 4.447576] Actions configured [ 4.451161] Initializing XFRM netlink socket [ 4.456529] NET: Registered protocol family 10 [ 4.463014] Segment Routing with IPv6 [ 4.463367] NET: Registered protocol family 17 [ 4.468061] NET: Registered protocol family 15 [ 4.472304] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.485398] Bluetooth: RFCOMM socket layer initialized [ 4.490512] Bluetooth: RFCOMM ver 1.11 [ 4.494126] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.500216] Bluetooth: HIDP socket layer initialized [ 4.505786] 9pnet: Installing 9P2000 support [ 4.509695] Key type dns_resolver registered [ 4.514954] registered taskstats version 1 [ 4.518143] Loading compiled-in X.509 certificates [ 4.529256] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.534002] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.544315] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.545991] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.554355] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.562984] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.679841] tegra194-pcie 14160000.pcie: Link up [ 4.682648] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.682867] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.683084] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.683320] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.683558] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.683979] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.684428] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.696053] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.696547] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.696970] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.698498] pci 0004:01:00.0: supports D1 D2 [ 4.698663] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.706892] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.707290] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.707588] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.708123] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.708376] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.708558] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.714729] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.721801] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.730590] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.740742] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.745356] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.750435] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.757662] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.766611] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.768561] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.776800] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.785308] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.891890] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.892418] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.892752] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.893082] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.893374] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.893699] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.894115] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.894610] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.914830] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.915068] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.916828] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.917975] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.919821] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.921288] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.922395] pci 0005:00:00.0: Removing from iommu group 7 [ 5.922735] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.956752] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.982240] host1x 13e10000.host1x: initialized [ 5.984098] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.985174] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.986461] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.987408] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.988583] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.989154] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.990047] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.990753] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.991663] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.992344] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.002117] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.008707] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.018967] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.025726] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.035787] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.043033] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.052845] falcon 15340000.vic: Adding to iommu group 17 [ 6.067955] falcon 15340000.vic: initialized [ 6.068993] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.074818] falcon 15380000.nvjpg: initialized [ 6.075384] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.086310] falcon 154c0000.nvenc: initialized [ 6.086928] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.096898] falcon 15a80000.nvenc1: initialized [ 6.097619] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.108868] nvdec 15480000.nvdec: initialized [ 6.109557] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.119887] nvdec 15140000.nvdec1: initialized [ 6.120575] tsec 15500000.tsec: Adding to iommu group 18 [ 6.126652] tsec 15500000.tsec: initialized [ 6.127264] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.133691] tsec 15100000.tsecb: initialized [ 6.138077] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.166717] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.180004] gpio-374 (wifi-enable): hogged as output/high [ 6.180300] gpio-431 (camera-control-output-low): hogged as output/low [ 6.180588] gpio-432 (camera-control-output-low): hogged as output/low [ 6.182258] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.184293] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.184812] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.186216] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.189299] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.195235] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.200904] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.209125] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.216327] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.227883] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.233247] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.239224] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.248021] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.257033] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.264414] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.272141] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.278043] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.288051] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.293922] pva 16000000.pva0: Adding to iommu group 22 [ 6.320742] pva 16000000.pva0: initialized [ 6.325219] pva 16800000.pva1: Adding to iommu group 23 [ 6.344510] pva 16800000.pva1: initialized [ 6.348348] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.361899] nvdla 15880000.nvdla0: initialized [ 6.363476] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.379794] nvdla 158c0000.nvdla1: initialized [ 6.384205] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.384695] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.384712] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.385325] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.385686] tegradccommon 15200000.display-hub: dma mapping done [ 6.385772] tegradc 15200000.display: Adding to iommu group 26 [ 6.385812] tegradc 15210000.display: Adding to iommu group 26 [ 6.387012] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.388463] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.389797] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.394293] tegradc 15210000.display: disp0 connected to head1->sor [ 6.395024] tegra_cec 3960000.tegra_cec: probed [ 6.401949] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.407304] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.413513] tegradc 15210000.display: DT parsed successfully [ 6.421627] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.424709] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.432001] kfuse 3830000.kfuse: initialized [ 6.440022] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.444477] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.450326] generic_infoframe_type: 0x87 [ 6.456424] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.456958] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.460734] tegradc 15200000.display: DT parsed successfully [ 6.467897] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.473135] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.480307] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.491899] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.496394] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.501778] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.510910] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.518630] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.519598] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.527667] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.532730] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.534351] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.551867] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.558316] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.561556] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.561614] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.573255] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.583085] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.619081] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.625408] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.633024] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.640312] usb usb1: Product: xHCI Host Controller [ 6.642997] random: crng init done [ 6.645255] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.654832] usb usb1: SerialNumber: 3610000.xhci [ 6.660765] hub 1-0:1.0: USB hub found [ 6.663357] hub 1-0:1.0: 4 ports detected [ 6.668494] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.672740] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.680465] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.687809] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.696042] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.703247] usb usb2: Product: xHCI Host Controller [ 6.707906] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.714106] usb usb2: SerialNumber: 3610000.xhci [ 6.720121] hub 2-0:1.0: USB hub found [ 6.722627] hub 2-0:1.0: 4 ports detected [ 6.765606] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.771552] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.773100] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.773291] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.786556] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.787610] tegra194-cpufreq ccplex: probed with BWMGR [ 6.788911] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.789391] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.789813] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.791295] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.799076] tegra194-vi5 15c10000.vi: initialized [ 6.800333] mmc0: CQHCI version 5.10 [ 6.800954] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.801847] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.806582] generic_infoframe_type: 0x87 [ 6.812943] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.816727] tegradc 15200000.display: DT parsed successfully [ 6.824798] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.824807] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.830611] tegradc 15200000.display: Display dc.00000000b85ff5f2 registered with id=0 [ 6.836848] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.836858] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.844977] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.859745] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.864619] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.870897] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.872732] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.872738] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.909199] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.909859] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.917552] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.930816] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.931053] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.943770] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.948825] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.954403] nvethernet 2490000.ethernet: Macsec not supported [ 6.962258] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.969516] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.977336] tegradc 15200000.display: probed [ 6.984244] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.993908] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.000847] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.009066] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.014564] mmc0: Command Queue Engine enabled [ 7.015574] tegra-se-nvhost 15810000.se: initialized [ 7.018149] mmc0: periodic cache flush enabled [ 7.018175] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.028128] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.034684] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.040655] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.045198] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.051876] tegra-se-nvhost 15820000.se: initialized [ 7.063448] Console: switching to colour frame buffer device 240x67 [ 7.065157] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.069532] tegradc 15200000.display: fb registered [ 7.069603] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.076013] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.092827] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.093304] tegra-se-nvhost 15830000.se: initialized [ 7.103268] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.104285] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.104613] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.105141] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.105809] tegra-se-nvhost 15840000.se: initialized [ 7.107426] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.108965] tegra_actmon d230000.actmon: in actmon_register()... [ 7.109112] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.153331] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.161114] hvc_sysfs: hypervisor is not present [ 7.164806] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.173116] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.180459] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.185442] usb 1-2: Manufacturer: Generic [ 7.190621] ALSA device list: [ 7.192415] No soundcards found. [ 7.192532] hub 1-2:1.0: USB hub found [ 7.200800] hub 1-2:1.0: 4 ports detected [ 7.216302] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.217647] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.220367] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.229162] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.235669] Extcon AUX1(HDMI) enable [ 7.239434] tegradc 15210000.display: disp1 connected to head1->sor [ 7.245664] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.252634] tegradc 15210000.display: DT parsed successfully [ 7.258274] tegradc 15210000.display: Display dc.000000009eeebca7 registered with id=1 [ 7.266192] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.268652] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.272188] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.292390] tegradc 15210000.display: probed [ 7.292713] tegradc 15210000.display: fb registered [ 7.298332] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.302571] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.304374] Freeing unused kernel memory: 3968K [ 7.310385] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.320382] tegradc 15210000.display: blank - powerdown [ 7.325847] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.327806] Run /init as init process [ 7.333734] Extcon DP: HPD disabled [ 7.341281] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.347824] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.347859] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.353900] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.361764] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.361770] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.361795] usb 2-3: Manufacturer: Generic [ 7.394180] hub 2-3:1.0: USB hub found [ 7.395753] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.395931] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.398410] Root device found: mmcblk0p1 [ 7.401333] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.409413] tegradc 15200000.display: blank - powerdown [ 7.411416] Found dev node: /dev/mmcblk0p1 [ 7.447137] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.450041] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.450049] Extcon AUX1(HDMI) disable [ 7.451080] Rootfs mounted over mmcblk0p1 [ 7.451767] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.474219] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.475096] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.486631] tegradc 15200000.display: unblank [ 7.487828] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.488051] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.494775] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.499282] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.503780] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.503784] Extcon AUX1(HDMI) enable [ 7.507120] Switching from initrd to actual rootfs [ 7.516055] tegradc 15200000.display: sync windows ret = 247 [ 7.546776] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.548236] Extcon HDMI: HPD enabled [ 7.549641] tegradc 15200000.display: hdmi: plugged [ 7.601051] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.602556] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.603956] usb 1-3: Product: Bluetooth Radio [ 7.605251] usb 1-3: Manufacturer: Realtek [ 7.606531] usb 1-3: SerialNumber: 00e04c000001 [ 7.664834] systemd[1]: System time before build time, advancing clock. [ 7.734948] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.740628] systemd[1]: Detected architecture arm64. [ 7.779474] systemd[1]: Set hostname to . [ 7.940887] systemd-sysv-generator[245]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.289580] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.291320] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.296802] systemd[1]: Created slice system-modprobe.slice. [ 8.301458] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.305830] systemd[1]: Created slice User and Session Slice. [ 8.309327] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.313608] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.317060] systemd[1]: Reached target User and Group Name Lookups. [ 8.320529] systemd[1]: Reached target Slices. [ 8.323752] systemd[1]: Reached target Swap. [ 8.327817] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.331576] systemd[1]: Listening on Syslog Socket. [ 8.335226] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.338687] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.343015] systemd[1]: Listening on Journal Audit Socket. [ 8.346758] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.350632] systemd[1]: Listening on Journal Socket. [ 8.355882] systemd[1]: Listening on udev Control Socket. [ 8.360963] systemd[1]: Listening on udev Kernel Socket. [ 8.369772] systemd[1]: Mounting Huge Pages File System... [ 8.378284] systemd[1]: Mounting POSIX Message Queue File System... [ 8.386531] systemd[1]: Mounting RPC Pipe File System... [ 8.395355] systemd[1]: Mounting Kernel Debug File System... [ 8.404144] systemd[1]: Mounting Kernel Trace File System... [ 8.415042] systemd[1]: Starting Journal Service... [ 8.424262] systemd[1]: Starting Set the console keyboard layout... [ 8.433061] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.436733] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.443412] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.451475] systemd[1]: Started Nameserver information manager. [ 8.456469] systemd[1]: Reached target Network (Pre). [ 8.463816] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.465682] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.472445] systemd[1]: Starting Load Kernel Modules... [ 8.480541] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.488781] systemd[1]: Starting udev Coldplug all Devices... [ 8.500484] systemd[1]: Mounted Huge Pages File System. [ 8.504247] systemd[1]: Mounted POSIX Message Queue File System. [ 8.508024] systemd[1]: Mounted RPC Pipe File System. [ 8.511779] systemd[1]: Mounted Kernel Debug File System. [ 8.513318] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.519440] systemd[1]: Mounted Kernel Trace File System. [ 8.524828] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.526300] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.527100] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.529247] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.529263] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.529268] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.529513] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.529855] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.530001] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.530013] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.543149] systemd[1]: nvfb-udev.service: Succeeded. [ 8.548298] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.560345] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.565551] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.567449] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.582689] systemd[1]: Starting Load/Save Random Seed... [ 8.590962] systemd[1]: Starting Create System Users... [ 8.626964] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.626964] [ 8.637315] systemd[1]: Finished Load/Save Random Seed. [ 8.650738] systemd[1]: Finished Create System Users. [ 8.658520] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.665004] systemd[1]: Finished Load Kernel Modules. [ 8.669616] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.675984] systemd[1]: Mounting Kernel Configuration File System... [ 8.683992] systemd[1]: Started OP-TEE Client Supplicant. [ 8.692166] systemd[1]: Starting Apply Kernel Variables... [ 8.702403] systemd[1]: Finished Set the console keyboard layout. [ 8.706579] systemd[1]: Mounted Kernel Configuration File System. [ 8.715310] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.720647] systemd[1]: Reached target Local File Systems (Pre). [ 10.241869] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.251370] imx219 9-0010: board setup failed [ 10.252640] imx219: probe of 9-0010 failed with error -121 [ 10.267350] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.274633] imx219 10-0010: board setup failed [ 10.277719] imx219: probe of 10-0010 failed with error -121 [ 10.381355] hot-surface-alert cooling state: 0 -> 1 [ 10.635190] using random self ethernet address [ 10.660198] using random host ethernet address [ 11.806743] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.806749] Creating 1 MTD partitions on "spi6.0": [ 11.806758] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.361339] using random self ethernet address [ 12.362448] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.774837] nvidia: loading out-of-tree module taints kernel. [ 58.101735] watchdog: watchdog0: watchdog did not stop! [ 58.615926] Trying to unregister non-registered hwtime source [ 61.679189] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.680997] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11ÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä0ÿâpm_post initialized dbells initialized ÿä3:2ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:20 UTC 2022ÿâavfs_clk_mach_post initialized ÿä aarÿâavfs_clk_platform_post initialized ÿäch6ÿâcvc_late initialized regulator_post initialized ÿä4 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: Thÿâpg_post initialized profile initialized fuse_late initialized extrentering main console loop ] as_post initialized bpmp: init complete ÿäis OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.617] E> invalid display type [0003.618] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.647] I> edid read success [0003.647] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.648] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.649] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.681] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 4096, height = 2160, frequency = 296703296 [0003.721] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.732] I> hdmi_enable, starting HDMI initialisation [0003.737] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.748] calling apps_init() [0003.748] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000822] Console: colour dummy device 80x25 [ 0.002208] printk: console [tty0] enabled [ 0.002267] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002303] pid_max: default: 32768 minimum: 301 [ 0.002497] LSM: Security Framework initializing [ 0.002554] Yama: becoming mindful. [ 0.002595] SELinux: Initializing. [ 0.002744] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002782] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005939] rcu: Hierarchical SRCU implementation. [ 0.006195] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007175] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007256] DTB Build time: Aug 10 2022 20:31:49 [ 0.010415] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010676] Remapping and enabling EFI services. [ 0.012857] smp: Bringing up secondary CPUs ... [ 0.042091] Detected PIPT I-cache on CPU1 [ 0.042180] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071648] Detected PIPT I-cache on CPU2 [ 0.071743] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101318] Detected PIPT I-cache on CPU3 [ 0.101408] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131025] Detected PIPT I-cache on CPU4 [ 0.131123] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160715] Detected PIPT I-cache on CPU5 [ 0.160803] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161115] smp: Brought up 1 node, 6 CPUs [ 0.161240] SMP: Total of 6 processors activated. [ 0.161302] CPU features: detected: Privileged Access Never [ 0.161326] CPU features: detected: LSE atomic instructions [ 0.161340] CPU features: detected: User Access Override [ 0.161352] CPU features: detected: 32-bit EL0 Support [ 0.161365] CPU features: detected: RAS Extension Support [ 0.161377] CPU features: detected: CRC32 instructions [ 0.161389] CPU features: detected: 32-bit EL1 Support [ 0.230991] CPU: All CPU(s) started at EL2 [ 0.236793] devtmpfs: initialized [ 0.286417] Registered cp15_barrier emulation handler [ 0.286541] Registered setend emulation handler [ 0.286561] KASLR enabled [ 0.286818] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286840] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288179] pinctrl core: initialized pinctrl subsystem [ 0.289224] SMBIOS 3.0.0 present. [ 0.289254] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289881] NET: Registered protocol family 16 [ 0.291840] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292343] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293058] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.293114] audit: initializing netlink subsys (disabled) [ 0.293391] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293834] thermal_sys: Registered thermal governor 'step_wise' [ 0.293840] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293855] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295972] cpuidle: using governor menu [ 0.296415] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296802] ASID allocator initialised with 32768 entries [ 0.297022] Serial: AMBA PL011 UART driver [ 0.301068] Tegra reboot handler registered. [ 0.372787] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.372890] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.373073] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.373132] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.373253] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.373291] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.373399] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.373436] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.373553] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.373592] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.376020] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.376052] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.376080] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.376105] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.376135] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.376165] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.376202] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.376232] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.376256] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.376279] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.376301] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.376324] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.376346] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.376370] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.376416] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.376441] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.376464] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.376547] mc-err: mcerr ops are set to t19x [ 0.389137] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.389159] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.389172] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.389185] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.396410] ACPI: Interpreter disabled. [ 0.397521] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.398859] iommu: Default domain type: Translated [ 0.398924] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.399313] SCSI subsystem initialized [ 0.399483] usbcore: registered new interface driver usbfs [ 0.399527] usbcore: registered new interface driver hub [ 0.399560] usbcore: registered new device driver usb [ 0.399972] mc: Linux media interface: v0.10 [ 0.400002] videodev: Linux video capture interface: v2.00 [ 0.400328] pps_core: LinuxPPS API ver. 1 registered [ 0.400340] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.400379] PTP clock support registered [ 0.400626] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.400897] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.400999] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.401647] Registered efivars operations [ 0.406655] FPGA manager framework [ 0.406789] Advanced Linux Sound Architecture Driver Initialized. [ 0.407360] Bluetooth: Core ver 2.22 [ 0.407398] NET: Registered protocol family 31 [ 0.407410] Bluetooth: HCI device and connection manager initialized [ 0.407426] Bluetooth: HCI socket layer initialized [ 0.407442] Bluetooth: L2CAP socket layer initialized [ 0.407464] Bluetooth: SCO socket layer initialized [ 0.409070] camchar: rtcpu character device driver loaded [ 0.410015] clocksource: Switched to clocksource arch_sys_counter [ 0.693538] VFS: Disk quotas dquot_6.6.0 [ 0.693610] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.693961] pnp: PnP ACPI: disabled [ 0.706632] la/ptsa driver initialized. [ 0.706791] NET: Registered protocol family 2 [ 0.706973] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.711533] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.711597] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.711889] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.712344] TCP: Hash tables configured (established 65536 bind 65536) [ 0.712488] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.712578] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.712783] NET: Registered protocol family 1 [ 0.713520] RPC: Registered named UNIX socket transport module. [ 0.713536] RPC: Registered udp transport module. [ 0.713546] RPC: Registered tcp transport module. [ 0.713555] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.713570] PCI: CLS 0 bytes, default 64 [ 0.713778] Trying to unpack rootfs image as initramfs... [ 0.901828] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.904052] Freeing initrd memory: 8196K [ 0.907959] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.907997] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.908031] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.908452] kvm [1]: IPA Size Limit: 40 bits [ 0.908992] kvm [1]: vgic interrupt IRQ9 [ 0.909423] kvm [1]: VHE mode initialized successfully [ 0.910906] Initialise system trusted keyrings [ 0.911173] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.916217] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.916915] NFS: Registering the id_resolver key type [ 0.916940] Key type id_resolver registered [ 0.916954] Key type id_legacy registered [ 0.917020] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.917038] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.917067] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.925829] NET: Registered protocol family 38 [ 0.925849] Key type asymmetric registered [ 0.925860] Asymmetric key parser 'x509' registered [ 0.925923] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.926200] io scheduler mq-deadline registered [ 0.926213] io scheduler kyber registered [ 0.930650] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.932949] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.933026] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.933079] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.933128] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.933176] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.937681] scrncapt: init (heads:4 wins:6 planes:4) [ 0.938143] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.938811] EINJ: ACPI disabled. [ 0.941382] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.941407] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.941417] tegra-pmc: ### PMC reset level: L1 [ 0.941426] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.941462] tegra-pmc: PMC Prod config success [ 0.946144] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.950568] random: fast init done [ 0.951579] printk: console [ttyTCU0] enabled [ 2.503805] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.507548] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.512319] arm-smmu 10000000.iommu: stage 1 translation [ 2.517599] arm-smmu 10000000.iommu: stage 2 translation [ 2.523342] arm-smmu 10000000.iommu: nested translation [ 2.528687] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.535859] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.547096] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.548960] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.555291] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.563041] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.568332] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.573052] arm-smmu 12000000.iommu: stage 1 translation [ 2.578839] arm-smmu 12000000.iommu: stage 2 translation [ 2.583982] arm-smmu 12000000.iommu: nested translation [ 2.589668] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.596592] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.607810] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.609946] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.616530] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.623915] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.633565] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.636943] tegra_profiler: auth: init [ 2.640952] THERMAL EST: found 3 subdevs [ 2.644368] THERMAL EST num_resources: 0 [ 2.648467] [THERMAL EST subdev 0] [ 2.651791] [THERMAL EST subdev 1] [ 2.654943] [THERMAL EST subdev 2] [ 2.658449] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.664887] THERMAL EST: thz register success. [ 2.669148] THERMAL EST: end of probe, return err: 0 [ 2.674301] nvsciipc: loaded module [ 2.681136] tun: Universal TUN/TAP device driver, 1.6 [ 2.684150] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.689962] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.695779] e1000e: Intel(R) PRO/1000 Network Driver [ 2.700702] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.706782] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.712077] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.718050] PPP generic driver version 2.4.2 [ 2.722336] PPP BSD Compression module registered [ 2.727048] PPP Deflate Compression module registered [ 2.732299] PPP MPPE Compression module registered [ 2.737316] usbcore: registered new interface driver r8152 [ 2.742579] usbcore: registered new interface driver asix [ 2.748160] usbcore: registered new interface driver ax88179_178a [ 2.754054] usbcore: registered new interface driver cdc_ether [ 2.760244] usbcore: registered new interface driver net1080 [ 2.765571] usbcore: registered new interface driver cdc_subset [ 2.771911] usbcore: registered new interface driver zaurus [ 2.777567] usbcore: registered new interface driver cdc_ncm [ 2.782988] usbcore: registered new interface driver aqc111 [ 2.788758] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.795006] ohci-pci: OHCI PCI platform driver [ 2.799003] ohci-platform: OHCI generic platform driver [ 2.804923] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.811381] usbcore: registered new interface driver uas [ 2.815562] usbcore: registered new interface driver usb-storage [ 2.821710] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.827452] mousedev: PS/2 mouse device common for all mice [ 2.832728] usbcore: registered new interface driver xpad [ 2.840560] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.843201] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.850983] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.857604] i2c /dev entries driver [ 2.860898] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.866660] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.872420] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.877477] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.883163] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.888542] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.893941] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.907270] device-mapper: uevent: version 1.0.3 [ 2.907731] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.914658] cpuidle: Initializing cpuidle driver [ 2.918455] sdhci: Secure Digital Host Controller Interface driver [ 2.922794] sdhci: Copyright(c) Pierre Ossman [ 2.927161] Synopsys Designware Multimedia Card Interface Driver [ 2.933083] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.939336] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.939883] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.952212] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.969540] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.978405] vdd-1v0: supplied by regulator-dummy [ 2.983798] vdd-1v8-hs: supplied by regulator-dummy [ 2.988509] vdd-1v8-ls: supplied by regulator-dummy [ 2.993235] vdd-1v8-ao: supplied by regulator-dummy [ 2.996947] vddio-ddr-1v1: supplied by regulator-dummy [ 3.001255] vdd-rtc: supplied by regulator-dummy [ 3.002810] spmic-ldo1: supplied by regulator-dummy [ 3.003974] vdd-ao-3v3: supplied by regulator-dummy [ 3.009940] vddio-emmc-3v3: supplied by regulator-dummy [ 3.016061] spmic-ldo4: supplied by regulator-dummy [ 3.017143] vdd-usb-3v3: supplied by regulator-dummy [ 3.024106] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.030232] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.035589] spmic-ldo8: supplied by vdd-1v8-ls [ 3.036955] gpio-510 (gpio_default): hogged as output/high [ 3.039086] gpio-511 (gpio_default): hogged as output/high [ 3.045885] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.184533] max77686-rtc max77620-rtc: registered as rtc0 [ 3.185484] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.185792] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.885672] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.886639] hid: raw HID events driver (C) Jiri Kosina [ 3.887308] usbcore: registered new interface driver usbhid [ 3.887447] usbhid: USB HID core driver [ 3.889247] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.890354] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.642354] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.717901] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.357 ms) ÿá[ 3.975531] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.976108] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.977080] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.977957] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.979787] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.980470] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.981007] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.982320] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.982732] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.984449] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.992121] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.998588] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.003064] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.009217] denver_knobs_init:MTS_VERSION:55637613 [ 4.021585] t19x_cache tegra-cache: probed [ 4.026160] optee: probing for conduit method. [ 4.027058] optee: revision 3.16 (65cc2218) [ 4.028112] optee: dynamic shared memory is enabled [ 4.030862] optee: initialized driver [ 4.037779] nvpmodel: initialized successfully [ 4.038482] tegra_hv: get_hvd: not initialized yet [ 4.042729] user_ivc_mempool: hypervisor not present [ 4.048965] usbcore: registered new interface driver snd-usb-audio [ 4.055408] u32 classifier [ 4.056704] input device check on [ 4.060475] Actions configured [ 4.063860] Initializing XFRM netlink socket [ 4.068776] NET: Registered protocol family 10 [ 4.075153] Segment Routing with IPv6 [ 4.076288] NET: Registered protocol family 17 [ 4.080328] NET: Registered protocol family 15 [ 4.085362] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.098988] Bluetooth: RFCOMM socket layer initialized [ 4.103276] Bluetooth: RFCOMM ver 1.11 [ 4.106956] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.113012] Bluetooth: HIDP socket layer initialized [ 4.118953] 9pnet: Installing 9P2000 support [ 4.122454] Key type dns_resolver registered [ 4.127691] registered taskstats version 1 [ 4.130937] Loading compiled-in X.509 certificates [ 4.143893] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.146638] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.156440] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.158833] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.167169] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.175766] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.290190] tegra194-pcie 14160000.pcie: Link up [ 4.293078] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.293334] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.293529] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.293936] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.294185] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.294655] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.295133] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.309009] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.309619] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.310229] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.311710] pci 0004:01:00.0: supports D1 D2 [ 4.311984] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.324019] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.324349] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.324584] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.325097] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.325348] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.325639] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.325928] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.332437] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.340668] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.350991] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.355794] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.361413] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.368410] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.376931] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.378659] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.387316] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.395519] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.511026] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.511524] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.511793] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.511931] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.512166] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.512491] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.512859] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.513315] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.536091] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.536371] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.537903] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.539244] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.540614] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.542519] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.543629] pci 0005:00:00.0: Removing from iommu group 7 [ 5.543924] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.579731] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.603645] host1x 13e10000.host1x: initialized [ 5.605039] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.605983] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.607540] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.608309] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.609564] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.610446] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.611518] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.612270] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.613213] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.613856] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.621406] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.628250] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.638287] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.644875] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.655225] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.661815] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.672112] falcon 15340000.vic: Adding to iommu group 17 [ 5.687309] falcon 15340000.vic: initialized [ 5.688175] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.694411] falcon 15380000.nvjpg: initialized [ 5.694933] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.705903] falcon 154c0000.nvenc: initialized [ 5.706525] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.714969] falcon 15a80000.nvenc1: initialized [ 5.715568] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.727209] nvdec 15480000.nvdec: initialized [ 5.727803] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.737278] nvdec 15140000.nvdec1: initialized [ 5.737825] tsec 15500000.tsec: Adding to iommu group 18 [ 5.743682] tsec 15500000.tsec: initialized [ 5.744147] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.752709] tsec 15100000.tsecb: initialized [ 5.756793] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.783577] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.796864] gpio-374 (wifi-enable): hogged as output/high [ 5.797244] gpio-431 (camera-control-output-low): hogged as output/low [ 5.797593] gpio-432 (camera-control-output-low): hogged as output/low [ 5.799607] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.801989] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.802700] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.804148] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.808679] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.814422] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.820054] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.828507] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.835779] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.847519] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.852417] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.858334] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.867160] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.876111] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.883889] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.891405] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.897479] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.906934] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.913363] pva 16000000.pva0: Adding to iommu group 22 [ 5.941492] pva 16000000.pva0: initialized [ 5.946710] pva 16800000.pva1: Adding to iommu group 23 [ 5.959281] pva 16800000.pva1: initialized [ 5.963748] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.977292] nvdla 15880000.nvdla0: initialized [ 5.978695] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.987673] nvdla 158c0000.nvdla1: initialized [ 5.993879] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.994228] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.994570] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.994817] tegradc 15200000.display: Adding to iommu group 26 [ 5.994947] tegradccommon 15200000.display-hub: dma mapping done [ 5.995256] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.997106] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.998151] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.003204] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.003836] tegradc 15210000.display: Adding to iommu group 26 [ 6.004250] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.004462] generic_infoframe_type: 0x87 [ 6.004600] tegradc 15200000.display: DT parsed successfully [ 6.004702] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.008553] tegra_cec 3960000.tegra_cec: probed [ 6.009549] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.015083] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.023673] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.024478] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.030987] kfuse 3830000.kfuse: initialized [ 6.038301] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.039669] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.043856] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.048898] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.057218] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.065803] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.073066] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.080014] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.085682] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.091014] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.099476] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.105704] tegradc 15210000.display: disp0 connected to head1->sor [ 6.126320] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.133922] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.144290] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.149359] tegradc 15210000.display: DT parsed successfully [ 6.170470] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.177284] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.213105] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.215348] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.220607] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.229440] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.237581] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.244934] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.251950] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.259184] usb usb1: Product: xHCI Host Controller [ 6.264225] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.270321] usb usb1: SerialNumber: 3610000.xhci [ 6.276446] hub 1-0:1.0: USB hub found [ 6.279175] hub 1-0:1.0: 4 ports detected [ 6.283939] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.288544] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.295891] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.303661] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.311493] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.318719] usb usb2: Product: xHCI Host Controller [ 6.323984] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.330173] usb usb2: SerialNumber: 3610000.xhci [ 6.335704] hub 2-0:1.0: USB hub found [ 6.338660] hub 2-0:1.0: 4 ports detected [ 6.383383] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.389672] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.391359] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.391546] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.405466] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.406678] tegra194-cpufreq ccplex: probed with BWMGR [ 6.408070] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.408534] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.409031] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.410234] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.417201] tegra194-vi5 15c10000.vi: initialized [ 6.418878] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.419139] generic_infoframe_type: 0x87 [ 6.419403] mmc0: CQHCI version 5.10 [ 6.420161] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.420356] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.420361] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.420370] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.420375] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.420379] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.422816] tegradc 15200000.display: DT parsed successfully [ 6.426112] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.432384] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.440493] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.447654] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.453633] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.454934] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.460276] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.460284] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.467906] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.472776] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.486797] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.493449] nvethernet 2490000.ethernet: Macsec not supported [ 6.502115] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.510275] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.517696] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.526050] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.532882] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.535079] tegradc 15200000.display: probed [ 6.540338] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.540642] mmc0: Command Queue Engine enabled [ 6.540655] mmc0: periodic cache flush enabled [ 6.540671] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.541111] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.541242] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.544919] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.550085] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.552856] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.650235] random: crng init done [ 6.653297] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.668362] Console: switching to colour frame buffer device 240x67 [ 6.669766] tegra-se-nvhost 15810000.se: initialized [ 6.674128] tegradc 15200000.display: fb registered [ 6.674201] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.684533] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.691033] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.696207] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.701979] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.709171] tegra-se-nvhost 15820000.se: initialized [ 6.721201] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.725950] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.732481] tegra-se-nvhost 15830000.se: initialized [ 6.733954] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.737798] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.744983] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.744988] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.744992] usb 1-2: Manufacturer: Generic [ 6.747323] hub 1-2:1.0: USB hub found [ 6.751782] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.759776] hub 1-2:1.0: 4 ports detected [ 6.763912] tegra-se-nvhost 15840000.se: initialized [ 6.781555] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.788070] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.796476] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.803151] tegra_actmon d230000.actmon: in actmon_register()... [ 6.809302] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.809919] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.815326] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.822601] Extcon AUX1(HDMI) enable [ 6.822741] tegradc 15210000.display: disp1 connected to head1->sor [ 6.830074] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.835255] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.839655] hvc_sysfs: hypervisor is not present [ 6.845079] tegradc 15210000.display: DT parsed successfully [ 6.862911] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.864766] tegradc 15210000.display: Display dc.00000000c0487ad8 registered with id=1 [ 6.879048] ALSA device list: [ 6.886130] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.889020] No soundcards found. [ 6.895573] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.907508] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.911892] tegradc 15210000.display: probed [ 6.913259] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.925257] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.925261] usb 2-3: Manufacturer: Generic [ 6.934071] tegradc 15210000.display: fb registered [ 6.936066] hub 2-3:1.0: USB hub found [ 6.942142] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.944383] Freeing unused kernel memory: 3968K [ 6.944618] hub 2-3:1.0: 4 ports detected [ 6.950267] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.950282] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.972081] tegradc 15200000.display: blank - powerdown [ 6.990155] Run /init as init process [ 7.015286] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.015290] Extcon AUX1(HDMI) disable [ 7.026045] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.038597] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.039540] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.042081] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.042086] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.052449] tegradc 15200000.display: unblank [ 7.053579] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.053773] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.059741] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.061606] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.065598] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.065602] Extcon AUX1(HDMI) enable [ 7.078375] tegradc 15200000.display: sync windows ret = 246 [ 7.120154] tegradc 15210000.display: blank - powerdown [ 7.121642] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.121647] Extcon DP: HPD disabled [ 7.121652] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.121663] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.121667] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.129009] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.132794] Extcon HDMI: HPD enabled [ 7.136492] tegradc 15200000.display: hdmi: plugged [ 7.179209] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.180815] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.182138] Root device found: mmcblk0p1 [ 7.182317] usb 1-3: Product: Bluetooth Radio [ 7.185064] usb 1-3: Manufacturer: Realtek [ 7.185701] Found dev node: /dev/mmcblk0p1 [ 7.186434] usb 1-3: SerialNumber: 00e04c000001 [ 7.223277] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.228516] Rootfs mounted over mmcblk0p1 [ 7.264789] Switching from initrd to actual rootfs [ 7.412872] systemd[1]: System time before build time, advancing clock. [ 7.484909] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.489884] systemd[1]: Detected architecture arm64. [ 7.541413] systemd[1]: Set hostname to . [ 7.699822] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.046893] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.048666] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.054313] systemd[1]: Created slice system-modprobe.slice. [ 8.059067] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.063442] systemd[1]: Created slice User and Session Slice. [ 8.066983] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.071300] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.074838] systemd[1]: Reached target User and Group Name Lookups. [ 8.078205] systemd[1]: Reached target Slices. [ 8.081403] systemd[1]: Reached target Swap. [ 8.085532] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.089445] systemd[1]: Listening on Syslog Socket. [ 8.093143] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.096615] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.100922] systemd[1]: Listening on Journal Audit Socket. [ 8.105989] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.111478] systemd[1]: Listening on Journal Socket. [ 8.115353] systemd[1]: Listening on udev Control Socket. [ 8.119040] systemd[1]: Listening on udev Kernel Socket. [ 8.127620] systemd[1]: Mounting Huge Pages File System... [ 8.136006] systemd[1]: Mounting POSIX Message Queue File System... [ 8.143956] systemd[1]: Mounting RPC Pipe File System... [ 8.152199] systemd[1]: Mounting Kernel Debug File System... [ 8.161086] systemd[1]: Mounting Kernel Trace File System... [ 8.171263] systemd[1]: Starting Journal Service... [ 8.180274] systemd[1]: Starting Set the console keyboard layout... [ 8.188632] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.194043] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.201823] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.211348] systemd[1]: Started Nameserver information manager. [ 8.215960] systemd[1]: Reached target Network (Pre). [ 8.222705] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.224534] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.232944] systemd[1]: Starting Load Kernel Modules... [ 8.240971] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.249989] systemd[1]: Starting udev Coldplug all Devices... [ 8.260798] systemd[1]: Mounted Huge Pages File System. [ 8.264735] systemd[1]: Mounted POSIX Message Queue File System. [ 8.269208] systemd[1]: Mounted RPC Pipe File System. [ 8.272251] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.272467] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.272708] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.272716] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.272725] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.272729] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.272921] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.273436] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.273615] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.273626] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.292063] systemd[1]: Mounted Kernel Debug File System. [ 8.295686] systemd[1]: Mounted Kernel Trace File System. [ 8.301853] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.307373] systemd[1]: nvfb-udev.service: Succeeded. [ 8.311314] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.321047] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.333520] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.335727] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.342123] systemd[1]: Starting Load/Save Random Seed... [ 8.351057] systemd[1]: Starting Create System Users... [ 8.358554] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.358554] [ 8.391548] systemd[1]: Finished Load Kernel Modules. [ 8.396176] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.405049] systemd[1]: Mounting Kernel Configuration File System... [ 8.413419] systemd[1]: Started OP-TEE Client Supplicant. [ 8.423007] systemd[1]: Starting Apply Kernel Variables... [ 8.434459] systemd[1]: Finished Load/Save Random Seed. [ 8.438689] systemd[1]: Mounted Kernel Configuration File System. [ 8.450833] systemd[1]: Finished Create System Users. [ 9.882261] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.890827] imx219 9-0010: board setup failed [ 9.890932] imx219: probe of 9-0010 failed with error -121 [ 9.906664] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.912022] imx219 10-0010: board setup failed [ 9.912121] imx219: probe of 10-0010 failed with error -121 [ 9.974611] hot-surface-alert cooling state: 0 -> 1 [ 10.640216] using random self ethernet address [ 10.641737] using random host ethernet address [ 11.486972] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.488211] Creating 1 MTD partitions on "spi6.0": [ 11.489314] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.058271] using random self ethernet address [ 12.059722] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.848082] nvidia: loading out-of-tree module taints kernel. [ 58.495569] watchdog: watchdog0: watchdog did not stop! [ 58.990889] Trying to unregister non-registered hwtime source [ 62.050632] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.052338] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeouÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 1ÿâclk_dt_late initialized ÿä1ÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä03:ÿâdmce initialized ÿä2ÿâcvc initialized ÿä3:20 UTC 202ÿâavfs_clk_mach_post initialized ÿä2 aaÿâavfs_clk_platform_post initialized ÿärchÿâcvc_late initialized regulator_post initialized ÿä64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: Tÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿähis OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.421] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.482] I> register 'maxim' power off handle [0003.484] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.617] E> invalid display type [0003.618] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.647] I> edid read success [0003.647] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.648] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.649] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.681] I> width = 720, height = 480, frequency = 26973026 [0003.686] I> width = 720, height = 576, frequency = 26973026 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 4096, height = 2160, frequency = 296703296 [0003.721] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.732] I> hdmi_enable, starting HDMI initialisation [0003.737] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.747] calling apps_init() [0003.748] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000685] Console: colour dummy device 80x25 [ 0.002125] printk: console [tty0] enabled [ 0.002197] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002232] pid_max: default: 32768 minimum: 301 [ 0.002416] LSM: Security Framework initializing [ 0.002494] Yama: becoming mindful. [ 0.002555] SELinux: Initializing. [ 0.002707] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002771] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006163] rcu: Hierarchical SRCU implementation. [ 0.006420] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007164] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007204] DTB Build time: Aug 10 2022 20:31:49 [ 0.009975] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010237] Remapping and enabling EFI services. [ 0.012185] smp: Bringing up secondary CPUs ... [ 0.044262] Detected PIPT I-cache on CPU1 [ 0.044336] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073941] Detected PIPT I-cache on CPU2 [ 0.074051] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103682] Detected PIPT I-cache on CPU3 [ 0.103823] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133646] Detected PIPT I-cache on CPU4 [ 0.133823] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163666] Detected PIPT I-cache on CPU5 [ 0.163792] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164187] smp: Brought up 1 node, 6 CPUs [ 0.164388] SMP: Total of 6 processors activated. [ 0.164460] CPU features: detected: Privileged Access Never [ 0.164485] CPU features: detected: LSE atomic instructions [ 0.164500] CPU features: detected: User Access Override [ 0.164515] CPU features: detected: 32-bit EL0 Support [ 0.164529] CPU features: detected: RAS Extension Support [ 0.164544] CPU features: detected: CRC32 instructions [ 0.164559] CPU features: detected: 32-bit EL1 Support [ 0.239818] CPU: All CPU(s) started at EL2 [ 0.245949] devtmpfs: initialized [ 0.296909] Registered cp15_barrier emulation handler [ 0.297035] Registered setend emulation handler [ 0.297058] KASLR enabled [ 0.297392] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.297419] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.298685] pinctrl core: initialized pinctrl subsystem [ 0.299902] SMBIOS 3.0.0 present. [ 0.299931] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.300573] NET: Registered protocol family 16 [ 0.302468] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.302980] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.303692] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.303751] audit: initializing netlink subsys (disabled) [ 0.304033] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.304444] thermal_sys: Registered thermal governor 'step_wise' [ 0.304450] thermal_sys: Registered thermal governor 'power_allocator' [ 0.304465] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.306705] cpuidle: using governor menu [ 0.307012] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.307413] ASID allocator initialised with 32768 entries [ 0.307655] Serial: AMBA PL011 UART driver [ 0.310983] Tegra reboot handler registered. [ 0.381441] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.381553] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.381747] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.381789] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.381936] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.381983] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.382100] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.382142] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.382289] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.382331] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.384468] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.384503] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.384535] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.384563] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.384592] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.384618] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.384656] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.384690] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.384731] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.384755] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.384792] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.384815] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.384853] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.384876] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.384899] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.384922] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.384945] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.385028] mc-err: mcerr ops are set to t19x [ 0.397488] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.397511] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.397524] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.397535] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.404600] ACPI: Interpreter disabled. [ 0.405709] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.406990] iommu: Default domain type: Translated [ 0.407064] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.407427] SCSI subsystem initialized [ 0.407579] usbcore: registered new interface driver usbfs [ 0.407624] usbcore: registered new interface driver hub [ 0.407658] usbcore: registered new device driver usb [ 0.408102] mc: Linux media interface: v0.10 [ 0.408134] videodev: Linux video capture interface: v2.00 [ 0.408465] pps_core: LinuxPPS API ver. 1 registered [ 0.408475] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.408495] PTP clock support registered [ 0.408715] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.408992] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.409073] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.409696] Registered efivars operations [ 0.414838] FPGA manager framework [ 0.414943] Advanced Linux Sound Architecture Driver Initialized. [ 0.415525] Bluetooth: Core ver 2.22 [ 0.415563] NET: Registered protocol family 31 [ 0.415574] Bluetooth: HCI device and connection manager initialized [ 0.415589] Bluetooth: HCI socket layer initialized [ 0.415605] Bluetooth: L2CAP socket layer initialized [ 0.415625] Bluetooth: SCO socket layer initialized [ 0.417222] camchar: rtcpu character device driver loaded [ 0.417888] clocksource: Switched to clocksource arch_sys_counter [ 0.702894] VFS: Disk quotas dquot_6.6.0 [ 0.702966] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.703361] pnp: PnP ACPI: disabled [ 0.716115] la/ptsa driver initialized. [ 0.716234] NET: Registered protocol family 2 [ 0.716400] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.720966] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.721029] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.721340] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.721778] TCP: Hash tables configured (established 65536 bind 65536) [ 0.721924] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722028] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722241] NET: Registered protocol family 1 [ 0.722871] RPC: Registered named UNIX socket transport module. [ 0.722885] RPC: Registered udp transport module. [ 0.722895] RPC: Registered tcp transport module. [ 0.722904] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.722933] PCI: CLS 0 bytes, default 64 [ 0.723191] Trying to unpack rootfs image as initramfs... [ 0.907684] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.909732] Freeing initrd memory: 8196K [ 0.914357] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.914398] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.914444] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.914913] kvm [1]: IPA Size Limit: 40 bits [ 0.915486] kvm [1]: vgic interrupt IRQ9 [ 0.915997] kvm [1]: VHE mode initialized successfully [ 0.918097] Initialise system trusted keyrings [ 0.918454] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.927521] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.928722] NFS: Registering the id_resolver key type [ 0.928762] Key type id_resolver registered [ 0.928776] Key type id_legacy registered [ 0.928900] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.928924] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.928965] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.939511] NET: Registered protocol family 38 [ 0.939537] Key type asymmetric registered [ 0.939551] Asymmetric key parser 'x509' registered [ 0.939608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.939898] io scheduler mq-deadline registered [ 0.939918] io scheduler kyber registered [ 0.947259] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.950426] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.950511] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.950590] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.950666] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.950738] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.956320] scrncapt: init (heads:4 wins:6 planes:4) [ 0.956606] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.957388] EINJ: ACPI disabled. [ 0.960837] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.960862] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.960876] tegra-pmc: ### PMC reset level: L1 [ 0.960889] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.960939] tegra-pmc: PMC Prod config success [ 0.966748] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.972438] random: fast init done [ 0.972543] printk: console [ttyTCU0] enabled [ 2.524912] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.529003] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.533557] arm-smmu 10000000.iommu: stage 1 translation [ 2.538922] arm-smmu 10000000.iommu: stage 2 translation [ 2.544536] arm-smmu 10000000.iommu: nested translation [ 2.549878] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.557042] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.569002] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.570170] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.576727] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.584662] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.589539] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.594237] arm-smmu 12000000.iommu: stage 1 translation [ 2.599737] arm-smmu 12000000.iommu: stage 2 translation [ 2.605420] arm-smmu 12000000.iommu: nested translation [ 2.610853] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.618044] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.629659] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.630891] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.637452] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.645159] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.655211] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.658219] tegra_profiler: auth: init [ 2.662158] THERMAL EST: found 3 subdevs [ 2.665775] THERMAL EST num_resources: 0 [ 2.669397] [THERMAL EST subdev 0] [ 2.672972] [THERMAL EST subdev 1] [ 2.676127] [THERMAL EST subdev 2] [ 2.679627] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.685884] THERMAL EST: thz register success. [ 2.690068] THERMAL EST: end of probe, return err: 0 [ 2.695652] nvsciipc: loaded module [ 2.703385] tun: Universal TUN/TAP device driver, 1.6 [ 2.705282] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.711143] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.716962] e1000e: Intel(R) PRO/1000 Network Driver [ 2.721628] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.727710] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.733002] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.739227] PPP generic driver version 2.4.2 [ 2.743429] PPP BSD Compression module registered [ 2.748250] PPP Deflate Compression module registered [ 2.753489] PPP MPPE Compression module registered [ 2.758511] usbcore: registered new interface driver r8152 [ 2.763767] usbcore: registered new interface driver asix [ 2.769338] usbcore: registered new interface driver ax88179_178a [ 2.775203] usbcore: registered new interface driver cdc_ether [ 2.781412] usbcore: registered new interface driver net1080 [ 2.787021] usbcore: registered new interface driver cdc_subset [ 2.792795] usbcore: registered new interface driver zaurus [ 2.798491] usbcore: registered new interface driver cdc_ncm [ 2.804170] usbcore: registered new interface driver aqc111 [ 2.810116] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.816174] ohci-pci: OHCI PCI platform driver [ 2.820453] ohci-platform: OHCI generic platform driver [ 2.826140] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.832432] usbcore: registered new interface driver uas [ 2.836502] usbcore: registered new interface driver usb-storage [ 2.842646] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.848697] mousedev: PS/2 mouse device common for all mice [ 2.853675] usbcore: registered new interface driver xpad [ 2.862112] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.864344] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.872467] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.878687] i2c /dev entries driver [ 2.882337] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.888178] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.893162] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.898620] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.903909] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.909694] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.915151] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.929142] device-mapper: uevent: version 1.0.3 [ 2.929637] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.935645] cpuidle: Initializing cpuidle driver [ 2.939372] sdhci: Secure Digital Host Controller Interface driver [ 2.944251] sdhci: Copyright(c) Pierre Ossman [ 2.948341] Synopsys Designware Multimedia Card Interface Driver [ 2.954283] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.960508] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.961313] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.973830] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.996961] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.007065] vdd-1v0: supplied by regulator-dummy [ 3.012702] vdd-1v8-hs: supplied by regulator-dummy [ 3.017652] vdd-1v8-ls: supplied by regulator-dummy [ 3.022751] vdd-1v8-ao: supplied by regulator-dummy [ 3.026799] vddio-ddr-1v1: supplied by regulator-dummy [ 3.031446] vdd-rtc: supplied by regulator-dummy [ 3.033330] spmic-ldo1: supplied by regulator-dummy [ 3.034700] vdd-ao-3v3: supplied by regulator-dummy [ 3.041029] vddio-emmc-3v3: supplied by regulator-dummy [ 3.047480] spmic-ldo4: supplied by regulator-dummy [ 3.048859] vdd-usb-3v3: supplied by regulator-dummy [ 3.055302] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.061655] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.067376] spmic-ldo8: supplied by vdd-1v8-ls [ 3.068993] gpio-510 (gpio_default): hogged as output/high [ 3.070402] gpio-511 (gpio_default): hogged as output/high [ 3.073393] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.209477] max77686-rtc max77620-rtc: registered as rtc0 [ 3.210881] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.211218] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.060251] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.061541] hid: raw HID events driver (C) Jiri Kosina [ 4.062326] usbcore: registered new interface driver usbhid [ 4.062467] usbhid: USB HID core driver [ 4.064335] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.065641] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.054847] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.129646] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.610 ms) ÿá[ 4.150616] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.151278] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.152594] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.153657] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.155855] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.156601] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.157233] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.159008] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.159371] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.161274] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.166856] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.173462] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.178985] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.184649] denver_knobs_init:MTS_VERSION:55637613 [ 4.197041] t19x_cache tegra-cache: probed [ 4.200048] optee: probing for conduit method. [ 4.200894] optee: revision 3.16 (65cc2218) [ 4.202061] optee: dynamic shared memory is enabled [ 4.205139] optee: initialized driver [ 4.212013] nvpmodel: initialized successfully [ 4.212902] tegra_hv: get_hvd: not initialized yet [ 4.217638] user_ivc_mempool: hypervisor not present [ 4.223606] usbcore: registered new interface driver snd-usb-audio [ 4.229811] u32 classifier [ 4.231122] input device check on [ 4.235092] Actions configured [ 4.238478] Initializing XFRM netlink socket [ 4.243655] NET: Registered protocol family 10 [ 4.250027] Segment Routing with IPv6 [ 4.250686] NET: Registered protocol family 17 [ 4.255249] NET: Registered protocol family 15 [ 4.259360] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.273097] Bluetooth: RFCOMM socket layer initialized [ 4.278088] Bluetooth: RFCOMM ver 1.11 [ 4.281791] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.287387] Bluetooth: HIDP socket layer initialized [ 4.293570] 9pnet: Installing 9P2000 support [ 4.296836] Key type dns_resolver registered [ 4.302630] registered taskstats version 1 [ 4.305223] Loading compiled-in X.509 certificates [ 4.318626] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.321017] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.331709] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.333421] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.341815] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.350568] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.466097] tegra194-pcie 14160000.pcie: Link up [ 4.469035] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.469279] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.469439] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.469791] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.470121] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.470507] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.471059] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.483905] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.484476] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.484969] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.486701] pci 0004:01:00.0: supports D1 D2 [ 4.486954] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.497143] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.497555] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.498108] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.498531] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.498824] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.498991] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.500930] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.508336] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.516877] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.527495] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.531994] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.537433] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.544059] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.553218] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.554874] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.563004] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.571495] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.674061] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.674691] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.674950] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.675105] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.675396] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.675589] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.675968] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.676418] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.693785] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.694493] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.696509] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.698565] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.700464] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.702220] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.703231] pci 0005:00:00.0: Removing from iommu group 7 [ 5.703564] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.733619] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.756870] host1x 13e10000.host1x: initialized [ 5.758692] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.759657] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.760794] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.761406] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.762836] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.763504] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.764489] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.765113] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.767393] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.774196] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.784337] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.791158] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.800984] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.808227] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.818318] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.825041] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.835160] falcon 15340000.vic: Adding to iommu group 17 [ 5.849189] falcon 15340000.vic: initialized [ 5.850192] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.855942] falcon 15380000.nvjpg: initialized [ 5.856517] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.868064] falcon 154c0000.nvenc: initialized [ 5.868598] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.877388] falcon 15a80000.nvenc1: initialized [ 5.877996] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.889526] nvdec 15480000.nvdec: initialized [ 5.890206] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.899141] nvdec 15140000.nvdec1: initialized [ 5.899767] tsec 15500000.tsec: Adding to iommu group 18 [ 5.906454] tsec 15500000.tsec: initialized [ 5.906903] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.915477] tsec 15100000.tsecb: initialized [ 5.919343] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.943173] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.955129] gpio-374 (wifi-enable): hogged as output/high [ 5.955431] gpio-431 (camera-control-output-low): hogged as output/low [ 5.955750] gpio-432 (camera-control-output-low): hogged as output/low [ 5.957429] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.959399] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.959931] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.966641] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.971650] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.977225] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.982998] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.991055] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.998572] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.009801] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.015306] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.021136] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.029937] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.039276] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.046627] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.054399] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.060528] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.069782] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.076139] pva 16000000.pva0: Adding to iommu group 22 [ 6.101826] pva 16000000.pva0: initialized [ 6.106477] pva 16800000.pva1: Adding to iommu group 23 [ 6.117334] pva 16800000.pva1: initialized [ 6.121402] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.133372] nvdla 15880000.nvdla0: initialized [ 6.134840] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.142591] nvdla 158c0000.nvdla1: initialized [ 6.146242] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.146458] tegradc 15200000.display: Adding to iommu group 26 [ 6.146545] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.146788] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.146817] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.146917] tegradccommon 15200000.display-hub: dma mapping done [ 6.148215] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.157694] tegradc 15210000.display: Adding to iommu group 26 [ 6.160517] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.167203] tegradc 15210000.display: disp0 connected to head1->sor [ 6.171731] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.178109] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.183715] tegra_cec 3960000.tegra_cec: probed [ 6.191094] tegradc 15210000.display: DT parsed successfully [ 6.195923] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.201295] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.208641] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.221647] kfuse 3830000.kfuse: initialized [ 6.226531] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.232404] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.239143] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.245756] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.255017] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.260624] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.270420] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.275114] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.295727] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.296058] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.298208] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.306448] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.315405] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.321931] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.329230] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.336607] usb usb1: Product: xHCI Host Controller [ 6.341331] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.347997] usb usb1: SerialNumber: 3610000.xhci [ 6.353794] hub 1-0:1.0: USB hub found [ 6.356483] hub 1-0:1.0: 4 ports detected [ 6.360884] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.365618] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.373519] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.380996] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.389069] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.396517] usb usb2: Product: xHCI Host Controller [ 6.401307] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.407255] usb usb2: SerialNumber: 3610000.xhci [ 6.413021] hub 2-0:1.0: USB hub found [ 6.415758] hub 2-0:1.0: 4 ports detected [ 6.455836] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.461561] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.462902] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.463121] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.476159] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.477223] tegra194-cpufreq ccplex: probed with BWMGR [ 6.478459] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.479123] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.479580] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.480836] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.491126] mmc0: CQHCI version 5.10 [ 6.492328] tegra194-vi5 15c10000.vi: initialized [ 6.494829] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.496563] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.499906] generic_infoframe_type: 0x87 [ 6.506046] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.510050] tegradc 15200000.display: DT parsed successfully [ 6.517814] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.517823] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.520632] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.523450] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.529924] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.537825] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.544665] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.549926] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.552619] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.559102] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.567322] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.573713] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.580673] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.589791] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.594977] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.595378] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.606933] mmc0: Command Queue Engine enabled [ 6.606938] mmc0: periodic cache flush enabled [ 6.606954] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.607483] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.607656] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.611519] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.611578] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.611583] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.613888] tegradc 15200000.display: probed [ 6.616256] nvethernet 2490000.ethernet: Macsec not supported [ 6.617846] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.617933] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.716342] Console: switching to colour frame buffer device 240x67 [ 6.717399] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.722137] tegradc 15200000.display: fb registered [ 6.732492] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.738267] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.739298] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.746011] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.752076] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.759918] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.772090] tegra-se-nvhost 15810000.se: initialized [ 6.777180] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.782304] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.788788] tegra-se-nvhost 15820000.se: initialized [ 6.794865] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.796609] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.799826] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.807428] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.807433] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.807437] usb 1-2: Manufacturer: Generic [ 6.809561] hub 1-2:1.0: USB hub found [ 6.814356] tegra-se-nvhost 15830000.se: initialized [ 6.822204] hub 1-2:1.0: 4 ports detected [ 6.827531] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.831062] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.835133] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.839169] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.843032] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.879449] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.880141] tegra-se-nvhost 15840000.se: initialized [ 6.886535] Extcon AUX1(HDMI) enable [ 6.886664] tegradc 15210000.display: disp1 connected to head1->sor [ 6.893390] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.895113] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.902772] tegra_actmon d230000.actmon: in actmon_register()... [ 6.907373] tegradc 15210000.display: DT parsed successfully [ 6.920700] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.926331] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.931854] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.939499] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.948111] hvc_sysfs: hypervisor is not present [ 6.953636] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.964949] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.998443] ALSA device list: [ 6.998547] No soundcards found. [ 7.004217] tegradc 15210000.display: probed [ 7.004579] tegradc 15210000.display: fb registered [ 7.007160] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.007420] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.007656] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.008104] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.008481] usb 2-3: Manufacturer: Generic [ 7.015771] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.015781] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.017580] Freeing unused kernel memory: 3968K [ 7.030798] hub 2-3:1.0: USB hub found [ 7.037995] Run /init as init process [ 7.043334] hub 2-3:1.0: 4 ports detected [ 7.049134] tegradc 15210000.display: blank - powerdown ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.054354] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.054358] Extcon DP: HPD disabled [ 7.054361] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.054390] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.054394] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.054460] tegradc 15200000.display: blank - powerdown [ 7.094626] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.094630] Extcon AUX1(HDMI) disable [ 7.117947] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.118814] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.125921] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.131768] tegradc 15200000.display: unblank [ 7.133188] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.133375] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.139114] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.141029] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.144999] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.145003] Extcon AUX1(HDMI) enable [ 7.157805] tegradc 15200000.display: sync windows ret = 247 [ 7.191606] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.193134] Extcon HDMI: HPD enabled [ 7.194618] tegradc 15200000.display: hdmi: plugged [ 7.201962] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.247433] Root device found: mmcblk0p1 [ 7.251096] Found dev node: /dev/mmcblk0p1 [ 7.266502] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.268051] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.275194] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.276798] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.278307] usb 1-3: Product: Bluetooth Radio [ 7.279743] usb 1-3: Manufacturer: Realtek [ 7.281146] usb 1-3: SerialNumber: 00e04c000001 [ 7.289777] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.295297] Rootfs mounted over mmcblk0p1 [ 7.333356] Switching from initrd to actual rootfs [ 7.479582] systemd[1]: System time before build time, advancing clock. [ 7.552547] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.557697] systemd[1]: Detected architecture arm64. [ 7.620464] systemd[1]: Set hostname to . [ 7.788496] systemd-sysv-generator[242]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.138675] random: systemd: uninitialized urandom read (16 bytes read) [ 8.140517] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.142042] random: crng init done [ 8.142249] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.149679] systemd[1]: Created slice system-modprobe.slice. [ 8.154569] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.158950] systemd[1]: Created slice User and Session Slice. [ 8.162589] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.166979] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.170524] systemd[1]: Reached target User and Group Name Lookups. [ 8.173916] systemd[1]: Reached target Slices. [ 8.177203] systemd[1]: Reached target Swap. [ 8.181365] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.185137] systemd[1]: Listening on Syslog Socket. [ 8.188784] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.192324] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.196637] systemd[1]: Listening on Journal Audit Socket. [ 8.200279] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.204108] systemd[1]: Listening on Journal Socket. [ 8.207993] systemd[1]: Listening on udev Control Socket. [ 8.211665] systemd[1]: Listening on udev Kernel Socket. [ 8.220003] systemd[1]: Mounting Huge Pages File System... [ 8.229830] systemd[1]: Mounting POSIX Message Queue File System... [ 8.239051] systemd[1]: Mounting RPC Pipe File System... [ 8.247569] systemd[1]: Mounting Kernel Debug File System... [ 8.255883] systemd[1]: Mounting Kernel Trace File System... [ 8.265738] systemd[1]: Starting Journal Service... [ 8.274606] systemd[1]: Starting Set the console keyboard layout... [ 8.283239] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.286976] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.293559] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.301739] systemd[1]: Started Nameserver information manager. [ 8.306157] systemd[1]: Reached target Network (Pre). [ 8.313460] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.315515] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.323188] systemd[1]: Starting Load Kernel Modules... [ 8.331347] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.339437] systemd[1]: Starting udev Coldplug all Devices... [ 8.350851] systemd[1]: Mounted Huge Pages File System. [ 8.354895] systemd[1]: Mounted POSIX Message Queue File System. [ 8.358697] systemd[1]: Mounted RPC Pipe File System. [ 8.361075] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.363711] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.366729] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.368299] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.369443] systemd[1]: Mounted Kernel Debug File System. [ 8.369790] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.372729] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.373112] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.375949] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.375958] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.376326] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.386585] systemd[1]: Mounted Kernel Trace File System. [ 8.396565] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.404725] systemd[1]: nvfb-udev.service: Succeeded. [ 8.408771] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.419566] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.432310] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.434754] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.442418] systemd[1]: Starting Load/Save Random Seed... [ 8.450930] systemd[1]: Starting Create System Users... [ 8.463624] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.463624] [ 8.497252] systemd[1]: Finished Load/Save Random Seed. [ 8.504308] systemd[1]: Finished Load Kernel Modules. [ 8.509320] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.516482] systemd[1]: Mounting Kernel Configuration File System... [ 8.525467] systemd[1]: Started OP-TEE Client Supplicant. [ 8.533822] systemd[1]: Starting Apply Kernel Variables... [ 8.544674] systemd[1]: Finished Set the console keyboard layout. [ 8.549122] systemd[1]: Mounted Kernel Configuration File System. [ 8.561207] systemd[1]: Finished Create System Users. [ 9.831167] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.838386] imx219 9-0010: board setup failed [ 9.839740] imx219: probe of 9-0010 failed with error -121 [ 9.870505] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.877273] imx219 10-0010: board setup failed [ 9.878642] imx219: probe of 10-0010 failed with error -121 [ 9.974467] hot-surface-alert cooling state: 0 -> 1 [ 10.306250] using random self ethernet address [ 10.307476] using random host ethernet address [ 11.625974] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.627247] Creating 1 MTD partitions on "spi6.0": [ 11.628440] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.222252] using random self ethernet address [ 12.222257] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.815216] nvidia: loading out-of-tree module taints kernel. [ 58.383654] watchdog: watchdog0: watchdog did not stop! [ 58.871654] Trying to unregister non-registered hwtime source [ 61.933011] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.934679] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized noc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.211] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.263] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.321] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.330] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.379] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.388] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.417] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.427] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.557] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.648] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.650] I> width = 720, height = 480, frequency = 26973026 [0003.654] I> width = 720, height = 576, frequency = 26973026 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.748] calling apps_init() [0003.749] starting app kernel_boot_app [0003.750] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000743] Console: colour dummy device 80x25 [ 0.002093] printk: console [tty0] enabled [ 0.002153] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002190] pid_max: default: 32768 minimum: 301 [ 0.002397] LSM: Security Framework initializing [ 0.002463] Yama: becoming mindful. [ 0.002508] SELinux: Initializing. [ 0.002652] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002692] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005638] rcu: Hierarchical SRCU implementation. [ 0.005895] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006815] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006888] DTB Build time: Aug 10 2022 20:31:49 [ 0.010027] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010344] Remapping and enabling EFI services. [ 0.012985] smp: Bringing up secondary CPUs ... [ 0.042175] Detected PIPT I-cache on CPU1 [ 0.042287] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071839] Detected PIPT I-cache on CPU2 [ 0.072014] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101607] Detected PIPT I-cache on CPU3 [ 0.101740] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131203] Detected PIPT I-cache on CPU4 [ 0.131305] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162141] Detected PIPT I-cache on CPU5 [ 0.162244] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162637] smp: Brought up 1 node, 6 CPUs [ 0.162796] SMP: Total of 6 processors activated. [ 0.162811] CPU features: detected: Privileged Access Never [ 0.162823] CPU features: detected: LSE atomic instructions [ 0.162834] CPU features: detected: User Access Override [ 0.162846] CPU features: detected: 32-bit EL0 Support [ 0.162857] CPU features: detected: RAS Extension Support [ 0.162869] CPU features: detected: CRC32 instructions [ 0.162881] CPU features: detected: 32-bit EL1 Support [ 0.228692] CPU: All CPU(s) started at EL2 [ 0.233806] devtmpfs: initialized [ 0.305567] Registered cp15_barrier emulation handler [ 0.305630] Registered setend emulation handler [ 0.305652] KASLR enabled [ 0.305979] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.306015] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.308180] pinctrl core: initialized pinctrl subsystem [ 0.309559] SMBIOS 3.0.0 present. [ 0.309624] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.310481] NET: Registered protocol family 16 [ 0.313689] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.314767] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.315924] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.316014] audit: initializing netlink subsys (disabled) [ 0.316425] audit: type=2000 audit(0.312:1): state=initialized audit_enabled=0 res=1 [ 0.316995] thermal_sys: Registered thermal governor 'step_wise' [ 0.317005] thermal_sys: Registered thermal governor 'power_allocator' [ 0.317034] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.320871] cpuidle: using governor menu [ 0.322087] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.322642] ASID allocator initialised with 32768 entries [ 0.323005] Serial: AMBA PL011 UART driver [ 0.329080] Tegra reboot handler registered. [ 0.425408] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.425570] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.425800] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.425863] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.426072] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.426156] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.426348] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.426404] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.426576] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.426633] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.429916] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.429968] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.430007] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.430044] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.430084] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.430120] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.430171] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.430236] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.430293] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.430337] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.430393] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.430426] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.430457] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.430496] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.430531] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.430563] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.430595] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.430722] mc-err: mcerr ops are set to t19x [ 0.448657] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.448685] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.448704] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.448722] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.457450] ACPI: Interpreter disabled. [ 0.458984] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.460743] iommu: Default domain type: Translated [ 0.460817] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.461321] SCSI subsystem initialized [ 0.461520] usbcore: registered new interface driver usbfs [ 0.461575] usbcore: registered new interface driver hub [ 0.461620] usbcore: registered new device driver usb [ 0.462154] mc: Linux media interface: v0.10 [ 0.462201] videodev: Linux video capture interface: v2.00 [ 0.462632] pps_core: LinuxPPS API ver. 1 registered [ 0.462649] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.462679] PTP clock support registered [ 0.462954] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.463319] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.463455] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.464301] Registered efivars operations [ 0.472518] FPGA manager framework [ 0.472665] Advanced Linux Sound Architecture Driver Initialized. [ 0.473424] Bluetooth: Core ver 2.22 [ 0.473480] NET: Registered protocol family 31 [ 0.473498] Bluetooth: HCI device and connection manager initialized [ 0.473521] Bluetooth: HCI socket layer initialized [ 0.473539] Bluetooth: L2CAP socket layer initialized [ 0.473569] Bluetooth: SCO socket layer initialized [ 0.475652] camchar: rtcpu character device driver loaded [ 0.476920] clocksource: Switched to clocksource arch_sys_counter [ 0.898394] VFS: Disk quotas dquot_6.6.0 [ 0.898487] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.898908] pnp: PnP ACPI: disabled [ 0.912463] la/ptsa driver initialized. [ 0.912654] NET: Registered protocol family 2 [ 0.912888] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.920557] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.920716] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.921137] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.921763] TCP: Hash tables configured (established 65536 bind 65536) [ 0.921923] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.922051] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.922370] NET: Registered protocol family 1 [ 0.923296] RPC: Registered named UNIX socket transport module. [ 0.923350] RPC: Registered udp transport module. [ 0.923366] RPC: Registered tcp transport module. [ 0.923380] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.923424] PCI: CLS 0 bytes, default 64 [ 0.923739] Trying to unpack rootfs image as initramfs... [ 1.183206] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.186507] Freeing initrd memory: 8196K [ 1.190923] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.190957] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.190996] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.191330] kvm [1]: IPA Size Limit: 40 bits [ 1.191845] kvm [1]: vgic interrupt IRQ9 [ 1.192435] kvm [1]: VHE mode initialized successfully [ 1.193900] Initialise system trusted keyrings [ 1.194242] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.200402] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.201351] NFS: Registering the id_resolver key type [ 1.201385] Key type id_resolver registered [ 1.201400] Key type id_legacy registered [ 1.201498] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.201522] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.201558] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.211749] NET: Registered protocol family 38 [ 1.211773] Key type asymmetric registered [ 1.211789] Asymmetric key parser 'x509' registered [ 1.211841] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.212105] io scheduler mq-deadline registered [ 1.212125] io scheduler kyber registered [ 1.217854] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.220844] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.221022] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.221100] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.221180] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.221254] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.226978] scrncapt: init (heads:4 wins:6 planes:4) [ 1.227207] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.228063] EINJ: ACPI disabled. [ 1.231788] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.231813] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.231828] tegra-pmc: ### PMC reset level: L1 [ 1.231841] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.231896] tegra-pmc: PMC Prod config success [ 1.237034] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.242550] random: fast init done [ 1.242914] printk: console [ttyTCU0] enabled [ 2.794576] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.799297] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.803885] arm-smmu 10000000.iommu: stage 1 translation [ 2.809235] arm-smmu 10000000.iommu: stage 2 translation [ 2.814861] arm-smmu 10000000.iommu: nested translation [ 2.819981] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.827111] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.838164] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.840210] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.846797] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.854894] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.860099] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.864816] arm-smmu 12000000.iommu: stage 1 translation [ 2.870330] arm-smmu 12000000.iommu: stage 2 translation [ 2.875774] arm-smmu 12000000.iommu: nested translation [ 2.881198] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.888356] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.899046] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.901477] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.907780] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.915407] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.925233] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.928146] tegra_profiler: auth: init [ 2.932453] THERMAL EST: found 3 subdevs [ 2.936145] THERMAL EST num_resources: 0 [ 2.939975] [THERMAL EST subdev 0] [ 2.943052] [THERMAL EST subdev 1] [ 2.946713] [THERMAL EST subdev 2] [ 2.949704] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.956148] THERMAL EST: thz register success. [ 2.960656] THERMAL EST: end of probe, return err: 0 [ 2.965743] nvsciipc: loaded module [ 2.972754] tun: Universal TUN/TAP device driver, 1.6 [ 2.975497] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.981731] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.987020] e1000e: Intel(R) PRO/1000 Network Driver [ 2.992213] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.998027] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.003339] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.009471] PPP generic driver version 2.4.2 [ 3.013736] PPP BSD Compression module registered [ 3.018306] PPP Deflate Compression module registered [ 3.023811] PPP MPPE Compression module registered [ 3.028824] usbcore: registered new interface driver r8152 [ 3.034337] usbcore: registered new interface driver asix [ 3.039665] usbcore: registered new interface driver ax88179_178a [ 3.045542] usbcore: registered new interface driver cdc_ether [ 3.051745] usbcore: registered new interface driver net1080 [ 3.057344] usbcore: registered new interface driver cdc_subset [ 3.063143] usbcore: registered new interface driver zaurus [ 3.068816] usbcore: registered new interface driver cdc_ncm [ 3.074500] usbcore: registered new interface driver aqc111 [ 3.080161] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.086209] ohci-pci: OHCI PCI platform driver [ 3.090535] ohci-platform: OHCI generic platform driver [ 3.096394] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.102885] usbcore: registered new interface driver uas [ 3.106812] usbcore: registered new interface driver usb-storage [ 3.113240] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.119177] mousedev: PS/2 mouse device common for all mice [ 3.124217] usbcore: registered new interface driver xpad [ 3.132308] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.135025] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.142513] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.149225] i2c /dev entries driver [ 3.152632] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.158475] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.163453] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.168900] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.174272] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.179776] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.185461] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.198907] device-mapper: uevent: version 1.0.3 [ 3.199322] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.205893] cpuidle: Initializing cpuidle driver [ 3.209766] sdhci: Secure Digital Host Controller Interface driver [ 3.214310] sdhci: Copyright(c) Pierre Ossman [ 3.218666] Synopsys Designware Multimedia Card Interface Driver [ 3.224647] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.230576] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.231396] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.244070] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.266200] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.275832] vdd-1v0: supplied by regulator-dummy [ 3.281410] vdd-1v8-hs: supplied by regulator-dummy [ 3.286274] vdd-1v8-ls: supplied by regulator-dummy [ 3.291204] vdd-1v8-ao: supplied by regulator-dummy [ 3.295107] vddio-ddr-1v1: supplied by regulator-dummy [ 3.299606] vdd-rtc: supplied by regulator-dummy [ 3.301331] spmic-ldo1: supplied by regulator-dummy [ 3.302543] vdd-ao-3v3: supplied by regulator-dummy [ 3.308799] vddio-emmc-3v3: supplied by regulator-dummy [ 3.315191] spmic-ldo4: supplied by regulator-dummy [ 3.316392] vdd-usb-3v3: supplied by regulator-dummy [ 3.322630] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.328857] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.334466] spmic-ldo8: supplied by vdd-1v8-ls [ 3.336066] gpio-510 (gpio_default): hogged as output/high [ 3.337439] gpio-511 (gpio_default): hogged as output/high [ 3.340321] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.476765] max77686-rtc max77620-rtc: registered as rtc0 [ 3.477896] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.478262] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.304723] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.305957] hid: raw HID events driver (C) Jiri Kosina [ 4.306853] usbcore: registered new interface driver usbhid [ 4.306991] usbhid: USB HID core driver [ 4.309077] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.310150] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.431515] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.506394] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 75.689 ms) ÿá[ 4.394809] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.395454] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.396483] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.397294] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.398937] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.399535] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.400097] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.401533] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.401837] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.403609] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.411202] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.417527] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.423037] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.430337] denver_knobs_init:MTS_VERSION:55637613 [ 4.445175] t19x_cache tegra-cache: probed [ 4.449363] optee: probing for conduit method. [ 4.450304] optee: revision 3.16 (65cc2218) [ 4.451351] optee: dynamic shared memory is enabled [ 4.452605] optee: initialized driver [ 4.457057] nvpmodel: initialized successfully [ 4.457557] tegra_hv: get_hvd: not initialized yet [ 4.461801] user_ivc_mempool: hypervisor not present [ 4.468103] usbcore: registered new interface driver snd-usb-audio [ 4.474356] u32 classifier [ 4.475818] input device check on [ 4.479529] Actions configured [ 4.483055] Initializing XFRM netlink socket [ 4.487856] NET: Registered protocol family 10 [ 4.494220] Segment Routing with IPv6 [ 4.495420] NET: Registered protocol family 17 [ 4.499476] NET: Registered protocol family 15 [ 4.504101] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.518020] Bluetooth: RFCOMM socket layer initialized [ 4.522215] Bluetooth: RFCOMM ver 1.11 [ 4.526265] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.531921] Bluetooth: HIDP socket layer initialized [ 4.538079] 9pnet: Installing 9P2000 support [ 4.541303] Key type dns_resolver registered [ 4.547251] registered taskstats version 1 [ 4.550032] Loading compiled-in X.509 certificates [ 4.562696] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.565728] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.575972] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.577776] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.586504] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.594976] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.713046] tegra194-pcie 14160000.pcie: Link up [ 4.716098] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.716300] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.716490] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.716767] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.717091] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.717444] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.717972] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.730120] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.730625] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.731107] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.732643] pci 0004:01:00.0: supports D1 D2 [ 4.732804] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.743106] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.743464] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.743664] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.744006] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.744282] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.744475] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.747710] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.755334] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.763577] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.774048] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.778539] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.784274] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.791389] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.800271] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.801547] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.810237] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.818711] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.933712] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.934206] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.934417] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.934578] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.934841] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.935069] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.935499] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.935926] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.955546] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.956028] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.957882] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.959049] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.960477] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.962216] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.963234] pci 0005:00:00.0: Removing from iommu group 7 [ 5.963500] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.999692] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.025056] host1x 13e10000.host1x: initialized [ 6.026568] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.027427] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.028692] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.029533] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.030699] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.031405] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.032541] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.033130] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.034088] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.034686] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.044005] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.050625] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.060704] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.067842] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.077796] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.084505] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.094713] falcon 15340000.vic: Adding to iommu group 17 [ 6.109893] falcon 15340000.vic: initialized [ 6.110846] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.116305] falcon 15380000.nvjpg: initialized [ 6.117002] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.127450] falcon 154c0000.nvenc: initialized [ 6.128042] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.137640] falcon 15a80000.nvenc1: initialized [ 6.138172] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.150638] nvdec 15480000.nvdec: initialized [ 6.151201] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.161025] nvdec 15140000.nvdec1: initialized [ 6.161617] tsec 15500000.tsec: Adding to iommu group 18 [ 6.167550] tsec 15500000.tsec: initialized [ 6.168080] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.174982] tsec 15100000.tsecb: initialized [ 6.179618] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.209223] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.221554] gpio-374 (wifi-enable): hogged as output/high [ 6.221875] gpio-431 (camera-control-output-low): hogged as output/low [ 6.222186] gpio-432 (camera-control-output-low): hogged as output/low [ 6.223935] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.226111] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.226649] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.228167] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.231416] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.237527] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.242901] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.251192] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.258505] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.269560] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.275285] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.280845] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.289624] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.299110] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.306194] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.313735] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.320210] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.329715] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.336113] pva 16000000.pva0: Adding to iommu group 22 [ 6.362057] pva 16000000.pva0: initialized [ 6.367350] pva 16800000.pva1: Adding to iommu group 23 [ 6.379122] pva 16800000.pva1: initialized [ 6.383166] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.397801] nvdla 15880000.nvdla0: initialized [ 6.399142] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.408241] nvdla 158c0000.nvdla1: initialized [ 6.412508] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.412584] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.412714] tegradc 15200000.display: Adding to iommu group 26 [ 6.412785] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.413326] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.413565] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.414085] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.414343] tegradccommon 15200000.display-hub: dma mapping done [ 6.419887] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.420251] tegradc 15210000.display: Adding to iommu group 26 [ 6.437045] tegra_cec 3960000.tegra_cec: probed [ 6.442723] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.450417] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.454795] kfuse 3830000.kfuse: initialized [ 6.459112] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.464784] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.472295] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.478240] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.488056] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.492844] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.502004] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.507891] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.528820] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.529326] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.530943] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.539160] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.547902] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.554233] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.561993] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.569198] usb usb1: Product: xHCI Host Controller [ 6.574159] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.580479] usb usb1: SerialNumber: 3610000.xhci [ 6.585857] hub 1-0:1.0: USB hub found [ 6.588711] hub 1-0:1.0: 4 ports detected [ 6.593433] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.598127] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.605746] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.613537] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.621388] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.628575] usb usb2: Product: xHCI Host Controller [ 6.633846] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.639814] usb usb2: SerialNumber: 3610000.xhci [ 6.645266] hub 2-0:1.0: USB hub found [ 6.648235] hub 2-0:1.0: 4 ports detected [ 6.694703] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.701236] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.702821] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.703039] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.716611] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.717812] tegra194-cpufreq ccplex: probed with BWMGR [ 6.718959] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.719472] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.719977] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.721161] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.728245] tegra194-vi5 15c10000.vi: initialized [ 6.729867] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.730143] generic_infoframe_type: 0x87 [ 6.731233] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.732368] tegradc 15200000.display: DT parsed successfully [ 6.739062] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.744490] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.752685] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.767139] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.767849] mmc0: CQHCI version 5.10 [ 6.773619] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.778627] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.783618] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.792268] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.804993] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.806470] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.806860] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.813347] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.821411] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.823415] random: crng init done [ 6.828819] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.835666] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.843273] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.845545] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.859608] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.865707] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.873578] nvethernet 2490000.ethernet: Macsec not supported [ 6.875037] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.876065] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.876178] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.876316] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.876692] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.877696] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.879174] tegradc 15200000.display: probed [ 6.892131] mmc0: Command Queue Engine enabled [ 6.946972] mmc0: periodic cache flush enabled [ 6.946992] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.947320] tegra-se-nvhost 15810000.se: initialized [ 6.947361] Console: switching to colour frame buffer device 240x67 [ 6.947698] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.951180] tegradc 15200000.display: fb registered [ 6.951279] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.958164] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.969720] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.974643] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.979291] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.984636] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.985607] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.992467] tegra-se-nvhost 15820000.se: initialized [ 7.030933] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.035674] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.041727] tegra-se-nvhost 15830000.se: initialized [ 7.047356] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.053056] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.056779] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.059240] tegra-se-nvhost 15840000.se: initialized [ 7.063618] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.064740] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.064748] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.065343] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.065347] Extcon AUX1(HDMI) enable [ 7.065670] tegradc 15210000.display: disp1 connected to head1->sor [ 7.065752] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.065833] tegradc 15210000.display: DT parsed successfully [ 7.065876] tegradc 15210000.display: Display dc.00000000a751def9 registered with id=1 [ 7.066008] tegradc 15210000.display: vblank syncpt # 14 for dc 1 [ 7.066015] tegradc 15210000.display: vpulse3 syncpt # 15 for dc 1 [ 7.067017] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.073227] tegradc 15210000.display: probed [ 7.073459] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.074646] tegra_actmon d230000.actmon: in actmon_register()... [ 7.075079] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.077091] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.077373] hvc_sysfs: hypervisor is not present [ 7.080746] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.080751] usb 1-2: Manufacturer: Generic [ 7.082883] hub 1-2:1.0: USB hub found [ 7.103678] ALSA device list: [ 7.108342] hub 1-2:1.0: 4 ports detected [ 7.113495] No soundcards found. [ 7.173867] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.219375] tegradc 15210000.display: fb registered [ 7.222932] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.231427] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.231436] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.244843] tegradc 15210000.display: blank - powerdown [ 7.245972] Freeing unused kernel memory: 3968K [ 7.249832] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.258376] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.262933] Extcon DP: HPD disabled [ 7.263133] Run /init as init process [ 7.270627] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.270651] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.274394] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.277792] usb 2-3: Manufacturer: Generic [ 7.288832] hub 2-3:1.0: USB hub found [ 7.290045] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.290055] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.298571] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.321804] tegradc 15200000.display: blank - powerdown [ 7.364077] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.364080] Extcon AUX1(HDMI) disable [ 7.376938] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.387706] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.388567] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.401374] tegradc 15200000.display: unblank [ 7.402617] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.402808] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.408701] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.410636] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.414640] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.414643] Extcon AUX1(HDMI) enable [ 7.424967] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.427401] tegradc 15200000.display: sync windows ret = 247 [ 7.454518] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.455964] Extcon HDMI: HPD enabled [ 7.457320] tegradc 15200000.display: hdmi: plugged [ 7.489539] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.491096] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.505626] Root device found: mmcblk0p1 [ 7.508956] Found dev node: /dev/mmcblk0p1 [ 7.526099] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.527475] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.528837] usb 1-3: Product: Bluetooth Radio [ 7.530111] usb 1-3: Manufacturer: Realtek [ 7.531338] usb 1-3: SerialNumber: 00e04c000001 [ 7.545417] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.550835] Rootfs mounted over mmcblk0p1 [ 7.588810] Switching from initrd to actual rootfs [ 7.741382] systemd[1]: System time before build time, advancing clock. [ 7.812889] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.817796] systemd[1]: Detected architecture arm64. [ 7.865056] systemd[1]: Set hostname to . [ 8.029777] systemd-sysv-generator[241]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.382168] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.383820] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.389394] systemd[1]: Created slice system-modprobe.slice. [ 8.394050] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.398020] systemd[1]: Created slice User and Session Slice. [ 8.401354] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.405365] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.408568] systemd[1]: Reached target User and Group Name Lookups. [ 8.411849] systemd[1]: Reached target Slices. [ 8.414831] systemd[1]: Reached target Swap. [ 8.418734] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.422266] systemd[1]: Listening on Syslog Socket. [ 8.425837] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.429159] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.433474] systemd[1]: Listening on Journal Audit Socket. [ 8.437064] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.440799] systemd[1]: Listening on Journal Socket. [ 8.446009] systemd[1]: Listening on udev Control Socket. [ 8.450552] systemd[1]: Listening on udev Kernel Socket. [ 8.458767] systemd[1]: Mounting Huge Pages File System... [ 8.467004] systemd[1]: Mounting POSIX Message Queue File System... [ 8.474923] systemd[1]: Mounting RPC Pipe File System... [ 8.483216] systemd[1]: Mounting Kernel Debug File System... [ 8.491715] systemd[1]: Mounting Kernel Trace File System... [ 8.501449] systemd[1]: Starting Journal Service... [ 8.510153] systemd[1]: Starting Set the console keyboard layout... [ 8.518282] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.521839] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.528404] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.536382] systemd[1]: Started Nameserver information manager. [ 8.540656] systemd[1]: Reached target Network (Pre). [ 8.547370] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.549332] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.557265] systemd[1]: Starting Load Kernel Modules... [ 8.565255] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.574208] systemd[1]: Starting udev Coldplug all Devices... [ 8.584005] systemd[1]: Mounted Huge Pages File System. [ 8.587715] systemd[1]: Mounted POSIX Message Queue File System. [ 8.592559] systemd[1]: Mounted RPC Pipe File System. [ 8.594829] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.598194] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.600532] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.601537] systemd[1]: Mounted Kernel Debug File System. [ 8.602142] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.605236] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.606667] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.606955] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.608413] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.611523] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.611535] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.621309] systemd[1]: Mounted Kernel Trace File System. [ 8.629354] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.636146] systemd[1]: nvfb-udev.service: Succeeded. [ 8.641741] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.652568] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.665708] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.667509] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.675249] systemd[1]: Starting Load/Save Random Seed... [ 8.682972] systemd[1]: Starting Create System Users... [ 8.710918] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.710918] [ 8.733868] systemd[1]: Finished Load/Save Random Seed. [ 8.746187] systemd[1]: Finished Create System Users. [ 8.752879] systemd[1]: Finished Load Kernel Modules. [ 8.757440] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.763582] systemd[1]: Mounting Kernel Configuration File System... [ 8.771482] systemd[1]: Started OP-TEE Client Supplicant. [ 8.779867] systemd[1]: Starting Apply Kernel Variables... [ 8.787860] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.798515] systemd[1]: Finished Set the console keyboard layout. [ 8.803385] systemd[1]: Mounted Kernel Configuration File System. [ 10.231074] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.241084] imx219 9-0010: board setup failed [ 10.252122] imx219: probe of 9-0010 failed with error -121 [ 10.282664] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.289667] imx219 10-0010: board setup failed [ 10.290985] imx219: probe of 10-0010 failed with error -121 [ 10.305182] hot-surface-alert cooling state: 0 -> 1 [ 10.734441] using random self ethernet address [ 10.735766] using random host ethernet address [ 11.855423] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.857213] Creating 1 MTD partitions on "spi6.0": [ 11.858911] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.507832] using random self ethernet address [ 12.509575] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.810493] nvidia: loading out-of-tree module taints kernel. [ 59.254900] watchdog: watchdog0: watchdog did not stop! [ 59.757866] Trying to unregister non-registered hwtime source [ 62.816118] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.817848] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeïÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized noc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 202ÿâavfs_clk_platform_post initialized ÿä2 aÿâcvc_late initialized regulator_post initialized ÿäarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.642] I> edid read success [0003.642] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.653] I> width = 1280, height = 720, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 4096, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.727] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.741] initializing target [0003.742] calling apps_init() [0003.743] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000748] Console: colour dummy device 80x25 [ 0.002132] printk: console [tty0] enabled [ 0.002195] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002230] pid_max: default: 32768 minimum: 301 [ 0.002425] LSM: Security Framework initializing [ 0.002486] Yama: becoming mindful. [ 0.002528] SELinux: Initializing. [ 0.002673] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002709] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005704] rcu: Hierarchical SRCU implementation. [ 0.005957] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006675] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006725] DTB Build time: Aug 10 2022 20:31:49 [ 0.009583] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009855] Remapping and enabling EFI services. [ 0.011655] smp: Bringing up secondary CPUs ... [ 0.043687] Detected PIPT I-cache on CPU1 [ 0.043763] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073388] Detected PIPT I-cache on CPU2 [ 0.073536] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103116] Detected PIPT I-cache on CPU3 [ 0.103255] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132935] Detected PIPT I-cache on CPU4 [ 0.133048] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162824] Detected PIPT I-cache on CPU5 [ 0.162932] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163244] smp: Brought up 1 node, 6 CPUs [ 0.163412] SMP: Total of 6 processors activated. [ 0.163467] CPU features: detected: Privileged Access Never [ 0.163488] CPU features: detected: LSE atomic instructions [ 0.163500] CPU features: detected: User Access Override [ 0.163513] CPU features: detected: 32-bit EL0 Support [ 0.163524] CPU features: detected: RAS Extension Support [ 0.163536] CPU features: detected: CRC32 instructions [ 0.163548] CPU features: detected: 32-bit EL1 Support [ 0.234214] CPU: All CPU(s) started at EL2 [ 0.240770] devtmpfs: initialized [ 0.286827] Registered cp15_barrier emulation handler [ 0.286980] Registered setend emulation handler [ 0.287004] KASLR enabled [ 0.287287] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287311] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288763] pinctrl core: initialized pinctrl subsystem [ 0.289796] SMBIOS 3.0.0 present. [ 0.289823] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.290468] NET: Registered protocol family 16 [ 0.292494] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293235] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293959] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294014] audit: initializing netlink subsys (disabled) [ 0.294240] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.294624] thermal_sys: Registered thermal governor 'step_wise' [ 0.294630] thermal_sys: Registered thermal governor 'power_allocator' [ 0.294643] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.296720] cpuidle: using governor menu [ 0.297236] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297680] ASID allocator initialised with 32768 entries [ 0.297910] Serial: AMBA PL011 UART driver [ 0.301014] Tegra reboot handler registered. [ 0.377008] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.377146] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.377377] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.377422] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.377572] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.377616] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.377778] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.377840] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.377980] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.378023] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.380316] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.380352] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.380380] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.380406] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.380435] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.380460] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.380496] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.380529] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.380554] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.380578] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.380610] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.380634] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.380657] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.380680] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.380724] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.380748] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.380771] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.380859] mc-err: mcerr ops are set to t19x [ 0.394412] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.394434] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.394446] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.394458] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.401252] ACPI: Interpreter disabled. [ 0.402443] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.403872] iommu: Default domain type: Translated [ 0.403941] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.404320] SCSI subsystem initialized [ 0.404484] usbcore: registered new interface driver usbfs [ 0.404531] usbcore: registered new interface driver hub [ 0.404583] usbcore: registered new device driver usb [ 0.404951] mc: Linux media interface: v0.10 [ 0.404984] videodev: Linux video capture interface: v2.00 [ 0.405280] pps_core: LinuxPPS API ver. 1 registered [ 0.405291] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.405313] PTP clock support registered [ 0.405504] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.405804] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.405857] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.406505] Registered efivars operations [ 0.411774] FPGA manager framework [ 0.411887] Advanced Linux Sound Architecture Driver Initialized. [ 0.412544] Bluetooth: Core ver 2.22 [ 0.412604] NET: Registered protocol family 31 [ 0.412617] Bluetooth: HCI device and connection manager initialized [ 0.412633] Bluetooth: HCI socket layer initialized [ 0.412667] Bluetooth: L2CAP socket layer initialized [ 0.412693] Bluetooth: SCO socket layer initialized [ 0.414329] camchar: rtcpu character device driver loaded [ 0.415352] clocksource: Switched to clocksource arch_sys_counter [ 0.738920] VFS: Disk quotas dquot_6.6.0 [ 0.738989] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.739308] pnp: PnP ACPI: disabled [ 0.751931] la/ptsa driver initialized. [ 0.752066] NET: Registered protocol family 2 [ 0.752239] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.757322] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.757388] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.757678] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.758123] TCP: Hash tables configured (established 65536 bind 65536) [ 0.758344] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.758436] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.758624] NET: Registered protocol family 1 [ 0.759252] RPC: Registered named UNIX socket transport module. [ 0.759266] RPC: Registered udp transport module. [ 0.759276] RPC: Registered tcp transport module. [ 0.759285] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.759299] PCI: CLS 0 bytes, default 64 [ 0.759573] Trying to unpack rootfs image as initramfs... [ 0.948209] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.950310] Freeing initrd memory: 8196K [ 0.954180] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.954208] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.954235] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.954565] kvm [1]: IPA Size Limit: 40 bits [ 0.955147] kvm [1]: vgic interrupt IRQ9 [ 0.955705] kvm [1]: VHE mode initialized successfully [ 0.956989] Initialise system trusted keyrings [ 0.957260] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.962449] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.963175] NFS: Registering the id_resolver key type [ 0.963200] Key type id_resolver registered [ 0.963210] Key type id_legacy registered [ 0.963277] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.963294] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.963320] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.972451] NET: Registered protocol family 38 [ 0.972473] Key type asymmetric registered [ 0.972484] Asymmetric key parser 'x509' registered [ 0.972522] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.972794] io scheduler mq-deadline registered [ 0.972828] io scheduler kyber registered [ 0.977575] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.979868] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.979924] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.979974] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.980021] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.980086] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.984652] scrncapt: init (heads:4 wins:6 planes:4) [ 0.985043] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.985809] EINJ: ACPI disabled. [ 0.988516] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.988536] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.988546] tegra-pmc: ### PMC reset level: L1 [ 0.988555] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.988592] tegra-pmc: PMC Prod config success [ 0.993432] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.477041] random: fast init done [ 2.544309] printk: console [ttyTCU0] enabled [ 2.550068] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.554946] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.559470] arm-smmu 10000000.iommu: stage 1 translation [ 2.564990] arm-smmu 10000000.iommu: stage 2 translation [ 2.570747] arm-smmu 10000000.iommu: nested translation [ 2.575840] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.583271] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.593288] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.596388] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.602703] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.610373] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.616008] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.620457] arm-smmu 12000000.iommu: stage 1 translation [ 2.625974] arm-smmu 12000000.iommu: stage 2 translation [ 2.631386] arm-smmu 12000000.iommu: nested translation [ 2.637093] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.644260] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.653844] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.657380] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.663937] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.671218] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.680714] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.684096] tegra_profiler: auth: init [ 2.688550] THERMAL EST: found 3 subdevs [ 2.692037] THERMAL EST num_resources: 0 [ 2.695870] [THERMAL EST subdev 0] [ 2.698922] [THERMAL EST subdev 1] [ 2.702348] [THERMAL EST subdev 2] [ 2.705590] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.711971] THERMAL EST: thz register success. [ 2.716545] THERMAL EST: end of probe, return err: 0 [ 2.721581] nvsciipc: loaded module [ 2.727985] tun: Universal TUN/TAP device driver, 1.6 [ 2.731188] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.737374] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.742923] e1000e: Intel(R) PRO/1000 Network Driver [ 2.747857] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.754167] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.759488] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.765572] PPP generic driver version 2.4.2 [ 2.769893] PPP BSD Compression module registered [ 2.774459] PPP Deflate Compression module registered [ 2.779703] PPP MPPE Compression module registered [ 2.784726] usbcore: registered new interface driver r8152 [ 2.790243] usbcore: registered new interface driver asix [ 2.795549] usbcore: registered new interface driver ax88179_178a [ 2.801673] usbcore: registered new interface driver cdc_ether [ 2.807397] usbcore: registered new interface driver net1080 [ 2.812989] usbcore: registered new interface driver cdc_subset [ 2.819270] usbcore: registered new interface driver zaurus [ 2.824703] usbcore: registered new interface driver cdc_ncm [ 2.830379] usbcore: registered new interface driver aqc111 [ 2.836260] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.842142] ohci-pci: OHCI PCI platform driver [ 2.846411] ohci-platform: OHCI generic platform driver [ 2.852239] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.858563] usbcore: registered new interface driver uas [ 2.862699] usbcore: registered new interface driver usb-storage [ 2.868793] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.874977] mousedev: PS/2 mouse device common for all mice [ 2.880113] usbcore: registered new interface driver xpad [ 2.887586] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.890860] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.898673] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.905146] i2c /dev entries driver [ 2.908487] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.913985] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.919317] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.924718] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.930077] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.935566] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.941216] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.953690] device-mapper: uevent: version 1.0.3 [ 2.954123] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.961128] cpuidle: Initializing cpuidle driver [ 2.965515] sdhci: Secure Digital Host Controller Interface driver [ 2.970458] sdhci: Copyright(c) Pierre Ossman [ 2.974326] Synopsys Designware Multimedia Card Interface Driver [ 2.980736] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.986461] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.987006] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.999915] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.016655] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.025525] vdd-1v0: supplied by regulator-dummy [ 3.030981] vdd-1v8-hs: supplied by regulator-dummy [ 3.035748] vdd-1v8-ls: supplied by regulator-dummy [ 3.040417] vdd-1v8-ao: supplied by regulator-dummy [ 3.044168] vddio-ddr-1v1: supplied by regulator-dummy [ 3.048589] vdd-rtc: supplied by regulator-dummy [ 3.050170] spmic-ldo1: supplied by regulator-dummy [ 3.051371] vdd-ao-3v3: supplied by regulator-dummy [ 3.057369] vddio-emmc-3v3: supplied by regulator-dummy [ 3.063493] spmic-ldo4: supplied by regulator-dummy [ 3.064640] vdd-usb-3v3: supplied by regulator-dummy [ 3.071311] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.077356] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.082757] spmic-ldo8: supplied by vdd-1v8-ls [ 3.084091] gpio-510 (gpio_default): hogged as output/high [ 3.086691] gpio-511 (gpio_default): hogged as output/high [ 3.093253] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.231924] max77686-rtc max77620-rtc: registered as rtc0 [ 3.233151] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.233466] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.936533] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.937526] hid: raw HID events driver (C) Jiri Kosina [ 3.938182] usbcore: registered new interface driver usbhid [ 3.938327] usbhid: USB HID core driver [ 3.940046] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.941185] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.885836] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.961450] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.425 ms) ÿá[ 4.026253] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.026783] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.027819] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.028542] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.030182] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.030814] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.031502] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.032676] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.033035] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.034967] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.042255] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.049168] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.054152] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.060824] denver_knobs_init:MTS_VERSION:55637613 [ 4.072785] t19x_cache tegra-cache: probed [ 4.077461] optee: probing for conduit method. [ 4.078325] optee: revision 3.16 (65cc2218) [ 4.079526] optee: dynamic shared memory is enabled [ 4.081652] optee: initialized driver [ 4.088277] nvpmodel: initialized successfully [ 4.089180] tegra_hv: get_hvd: not initialized yet [ 4.093808] user_ivc_mempool: hypervisor not present [ 4.099737] usbcore: registered new interface driver snd-usb-audio [ 4.106309] u32 classifier [ 4.107616] input device check on [ 4.111244] Actions configured [ 4.114730] Initializing XFRM netlink socket [ 4.119665] NET: Registered protocol family 10 [ 4.125975] Segment Routing with IPv6 [ 4.127178] NET: Registered protocol family 17 [ 4.131206] NET: Registered protocol family 15 [ 4.135869] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.149487] Bluetooth: RFCOMM socket layer initialized [ 4.154104] Bluetooth: RFCOMM ver 1.11 [ 4.157813] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.163926] Bluetooth: HIDP socket layer initialized [ 4.169599] 9pnet: Installing 9P2000 support [ 4.173366] Key type dns_resolver registered [ 4.178540] registered taskstats version 1 [ 4.181744] Loading compiled-in X.509 certificates [ 4.195277] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.197337] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.207158] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.209484] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.218240] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.226367] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.343511] tegra194-pcie 14160000.pcie: Link up [ 4.346741] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.346955] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.347111] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.347420] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.347596] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.348122] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.348573] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.361403] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.361818] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.362238] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.363910] pci 0004:01:00.0: supports D1 D2 [ 4.364068] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.376079] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.376409] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.376619] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.377104] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.377361] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.377582] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.378273] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.385719] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.393973] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.404283] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.408993] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.414285] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.421247] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.430572] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.432074] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.440394] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.449111] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.564313] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.564951] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.565186] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.565418] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.565649] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.565843] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.566266] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.566689] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.586819] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.587056] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.588856] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.590200] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.591267] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.592734] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.593699] pci 0005:00:00.0: Removing from iommu group 7 [ 5.594114] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.629723] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.653645] host1x 13e10000.host1x: initialized [ 5.655330] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.656476] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.657617] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.658406] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.659649] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.660361] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.661307] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.661995] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.662909] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.664453] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.674216] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.681390] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.691454] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.698117] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.708299] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.715326] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.725038] falcon 15340000.vic: Adding to iommu group 17 [ 5.740335] falcon 15340000.vic: initialized [ 5.741203] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.746727] falcon 15380000.nvjpg: initialized [ 5.747272] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.758445] falcon 154c0000.nvenc: initialized [ 5.758926] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.768351] falcon 15a80000.nvenc1: initialized [ 5.768980] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.781087] nvdec 15480000.nvdec: initialized [ 5.781647] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.791292] nvdec 15140000.nvdec1: initialized [ 5.791916] tsec 15500000.tsec: Adding to iommu group 18 [ 5.798105] tsec 15500000.tsec: initialized [ 5.798646] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.805908] tsec 15100000.tsecb: initialized [ 5.809841] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.837335] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.850247] gpio-374 (wifi-enable): hogged as output/high [ 5.850608] gpio-431 (camera-control-output-low): hogged as output/low [ 5.850955] gpio-432 (camera-control-output-low): hogged as output/low [ 5.852902] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.854669] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.855268] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.857025] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.861873] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.867670] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.873504] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.881948] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.889236] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.900997] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.905506] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.911272] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.920180] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.929473] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.936973] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.944426] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.950533] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.960409] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.966669] pva 16000000.pva0: Adding to iommu group 22 [ 5.993053] pva 16000000.pva0: initialized [ 5.998532] pva 16800000.pva1: Adding to iommu group 23 [ 6.010488] pva 16800000.pva1: initialized [ 6.015023] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.029707] nvdla 15880000.nvdla0: initialized [ 6.031495] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.040558] nvdla 158c0000.nvdla1: initialized [ 6.043967] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.043990] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.044007] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.044256] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.045036] tegradccommon 15200000.display-hub: dma mapping done [ 6.045068] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.045680] tegradc 15210000.display: Adding to iommu group 26 [ 6.046578] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.046672] tegradc 15200000.display: Adding to iommu group 26 [ 6.055492] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.055766] tegra_cec 3960000.tegra_cec: probed [ 6.062237] generic_infoframe_type: 0x87 [ 6.069052] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.072820] tegradc 15200000.display: DT parsed successfully [ 6.077261] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.082889] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.089973] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.098389] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.103222] kfuse 3830000.kfuse: initialized [ 6.109087] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.109095] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.110113] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.117965] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.121816] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.129650] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.130320] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.139245] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.156734] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.167054] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.171086] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.180696] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.189446] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.197426] tegradc 15210000.display: disp0 connected to head1->sor [ 6.202944] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.208826] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.218245] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.223789] tegradc 15210000.display: DT parsed successfully [ 6.241229] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.245750] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.268830] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.274122] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.282603] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.290879] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.297916] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.305451] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.312648] usb usb1: Product: xHCI Host Controller [ 6.317332] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.323522] usb usb1: SerialNumber: 3610000.xhci [ 6.329205] hub 1-0:1.0: USB hub found [ 6.332497] hub 1-0:1.0: 4 ports detected [ 6.337095] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.341593] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.349189] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.356890] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.365023] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.372001] usb usb2: Product: xHCI Host Controller [ 6.377268] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.383193] usb usb2: SerialNumber: 3610000.xhci [ 6.388607] hub 2-0:1.0: USB hub found [ 6.391680] hub 2-0:1.0: 4 ports detected [ 6.432046] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.438314] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.439851] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.440037] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.454000] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.455092] tegra194-cpufreq ccplex: probed with BWMGR [ 6.456528] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.456995] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.457457] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.458679] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.466357] tegra194-vi5 15c10000.vi: initialized [ 6.467729] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.467853] mmc0: CQHCI version 5.10 [ 6.468815] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.469068] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.469073] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.469080] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.469085] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.469088] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.471870] generic_infoframe_type: 0x87 [ 6.475436] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.475442] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.475447] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.476976] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.481752] tegradc 15200000.display: DT parsed successfully [ 6.496510] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.503233] nvethernet 2490000.ethernet: Macsec not supported [ 6.503425] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.504572] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.505660] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.505769] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.505883] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.506853] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.508446] tegra-se-nvhost 15810000.se: initialized [ 6.513997] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.514719] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.514896] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.515672] tegra-se-nvhost 15820000.se: initialized [ 6.517897] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.519851] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.519855] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.520201] tegradc 15200000.display: vblank syncpt # 13 for dc 0 [ 6.526914] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.533322] tegradc 15200000.display: vpulse3 syncpt # 14 for dc 0 [ 6.533503] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.540722] tegra-se-nvhost 15830000.se: initialized [ 6.548916] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.554852] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.561355] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.567416] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.577502] tegradc 15200000.display: probed [ 6.583231] tegra-se-nvhost 15840000.se: initialized [ 6.635801] mmc0: Command Queue Engine enabled [ 6.638902] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.645407] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.645436] mmc0: periodic cache flush enabled [ 6.646999] tegra_actmon d230000.actmon: in actmon_register()... [ 6.647202] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.647621] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.648168] hvc_sysfs: hypervisor is not present [ 6.678553] ALSA device list: [ 6.680331] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.691176] No soundcards found. [ 6.791693] Console: switching to colour frame buffer device 240x67 [ 6.791840] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.797696] tegradc 15200000.display: fb registered [ 6.802335] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.807453] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.822256] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.826641] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.840203] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.842128] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.848268] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.855423] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.860400] usb 1-2: Manufacturer: Generic [ 6.866688] hub 1-2:1.0: USB hub found [ 6.869474] hub 1-2:1.0: 4 ports detected [ 6.900908] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.902204] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.902425] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.903454] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.904489] Extcon AUX1(HDMI) enable [ 6.908159] tegradc 15210000.display: disp1 connected to head1->sor [ 6.914800] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.921781] tegradc 15210000.display: DT parsed successfully [ 6.926969] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.935161] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.941170] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.954598] tegradc 15210000.display: probed [ 6.954939] tegradc 15210000.display: fb registered [ 6.960142] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.960282] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.963738] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.963747] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.965883] Freeing unused kernel memory: 3968K [ 6.989549] tegradc 15210000.display: blank - powerdown [ 6.994462] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.995667] Run /init as init process [ 7.002725] Extcon DP: HPD disabled [ 7.009194] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.009200] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.009205] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.009208] usb 2-3: Manufacturer: Generic [ 7.010294] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.019674] hub 2-3:1.0: USB hub found [ 7.021421] hub 2-3:1.0: 4 ports detected [ 7.025514] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.034262] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.062026] tegradc 15200000.display: blank - powerdown [ 7.101278] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.101282] Extcon AUX1(HDMI) disable [ 7.103394] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.103398] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.124437] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.125262] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.135426] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.138447] tegradc 15200000.display: unblank [ 7.139468] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.139650] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.145189] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.147113] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.151104] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.151108] Extcon AUX1(HDMI) enable [ 7.163863] tegradc 15200000.display: sync windows ret = 246 [ 7.191720] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.193217] Extcon HDMI: HPD enabled [ 7.194562] tegradc 15200000.display: hdmi: plugged [ 7.243033] Root device found: mmcblk0p1 [ 7.246594] Found dev node: /dev/mmcblk0p1 [ 7.282862] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.288575] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.288604] Rootfs mounted over mmcblk0p1 [ 7.289966] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.289971] usb 1-3: Product: Bluetooth Radio [ 7.289975] usb 1-3: Manufacturer: Realtek [ 7.289985] usb 1-3: SerialNumber: 00e04c000001 [ 7.326799] Switching from initrd to actual rootfs [ 7.471248] systemd[1]: System time before build time, advancing clock. [ 7.544216] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.549195] systemd[1]: Detected architecture arm64. [ 7.612075] systemd[1]: Set hostname to . [ 7.770355] systemd-sysv-generator[254]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.122273] random: systemd: uninitialized urandom read (16 bytes read) [ 8.124071] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.125666] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.131104] systemd[1]: Created slice system-modprobe.slice. [ 8.134545] random: systemd: uninitialized urandom read (16 bytes read) [ 8.137172] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.140251] random: systemd: uninitialized urandom read (16 bytes read) [ 8.142815] systemd[1]: Created slice User and Session Slice. [ 8.146238] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.150447] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.153810] systemd[1]: Reached target User and Group Name Lookups. [ 8.156933] systemd[1]: Reached target Slices. [ 8.159986] systemd[1]: Reached target Swap. [ 8.164024] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.167614] systemd[1]: Listening on Syslog Socket. [ 8.171106] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.174413] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.178692] systemd[1]: Listening on Journal Audit Socket. [ 8.182247] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.185999] systemd[1]: Listening on Journal Socket. [ 8.189627] systemd[1]: Listening on udev Control Socket. [ 8.194566] systemd[1]: Listening on udev Kernel Socket. [ 8.204739] systemd[1]: Mounting Huge Pages File System... [ 8.213038] systemd[1]: Mounting POSIX Message Queue File System... [ 8.221134] systemd[1]: Mounting RPC Pipe File System... [ 8.229613] systemd[1]: Mounting Kernel Debug File System... [ 8.238346] systemd[1]: Mounting Kernel Trace File System... [ 8.248861] systemd[1]: Starting Journal Service... [ 8.257809] systemd[1]: Starting Set the console keyboard layout... [ 8.266226] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.269855] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.276780] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.288223] systemd[1]: Started Nameserver information manager. [ 8.294603] systemd[1]: Reached target Network (Pre). [ 8.303032] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.305979] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.315759] systemd[1]: Starting Load Kernel Modules... [ 8.326266] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.337877] systemd[1]: Starting udev Coldplug all Devices... [ 8.347986] systemd[1]: Mounted Huge Pages File System. [ 8.351564] systemd[1]: Mounted POSIX Message Queue File System. [ 8.355134] systemd[1]: Mounted RPC Pipe File System. [ 8.355667] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.361324] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.363333] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.363905] systemd[1]: Mounted Kernel Debug File System. [ 8.364925] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.367805] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.367810] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.367987] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.368190] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.368361] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.368368] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.381771] systemd[1]: Mounted Kernel Trace File System. [ 8.390288] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.396330] systemd[1]: nvfb-udev.service: Succeeded. [ 8.401057] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.413332] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.425718] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.427896] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.435497] systemd[1]: Starting Load/Save Random Seed... [ 8.443805] systemd[1]: Starting Create System Users... [ 8.460723] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.460723] [ 8.500510] systemd[1]: Finished Load Kernel Modules. [ 8.505402] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.512560] systemd[1]: Mounting Kernel Configuration File System... [ 8.520495] systemd[1]: Started OP-TEE Client Supplicant. [ 8.529060] systemd[1]: Starting Apply Kernel Variables... [ 8.539148] systemd[1]: Finished Set the console keyboard layout. [ 8.543400] systemd[1]: Mounted Kernel Configuration File System. [ 8.554847] systemd[1]: Finished Create System Users. [ 8.563160] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.731398] random: crng init done [ 9.732640] random: 7 urandom warning(s) missed due to ratelimiting [ 9.866072] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.872884] imx219 9-0010: board setup failed [ 9.874239] imx219: probe of 9-0010 failed with error -121 [ 9.886507] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.893021] imx219 10-0010: board setup failed [ 9.894379] imx219: probe of 10-0010 failed with error -121 [ 9.991634] hot-surface-alert cooling state: 0 -> 1 [ 10.731075] using random self ethernet address [ 10.737701] using random host ethernet address [ 11.440816] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.442564] Creating 1 MTD partitions on "spi6.0": [ 11.447569] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.205794] using random self ethernet address [ 12.208948] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.803405] nvidia: loading out-of-tree module taints kernel. [ 59.684904] watchdog: watchdog0: watchdog did not stop! [ 60.148449] Trying to unregister non-registered hwtime source [ 63.209091] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.210537] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:9ùÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.045] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.086] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.325] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.644] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.744] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000705] Console: colour dummy device 80x25 [ 0.002229] printk: console [tty0] enabled [ 0.002290] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002325] pid_max: default: 32768 minimum: 301 [ 0.002573] LSM: Security Framework initializing [ 0.002645] Yama: becoming mindful. [ 0.002697] SELinux: Initializing. [ 0.002915] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002956] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006753] rcu: Hierarchical SRCU implementation. [ 0.007024] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.008003] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.008040] DTB Build time: Aug 10 2022 20:31:49 [ 0.011067] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011328] Remapping and enabling EFI services. [ 0.013431] smp: Bringing up secondary CPUs ... [ 0.043744] Detected PIPT I-cache on CPU1 [ 0.043860] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073567] Detected PIPT I-cache on CPU2 [ 0.073727] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103534] Detected PIPT I-cache on CPU3 [ 0.103633] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133544] Detected PIPT I-cache on CPU4 [ 0.133643] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163414] Detected PIPT I-cache on CPU5 [ 0.163483] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163853] smp: Brought up 1 node, 6 CPUs [ 0.164061] SMP: Total of 6 processors activated. [ 0.164113] CPU features: detected: Privileged Access Never [ 0.164135] CPU features: detected: LSE atomic instructions [ 0.164149] CPU features: detected: User Access Override [ 0.164179] CPU features: detected: 32-bit EL0 Support [ 0.164192] CPU features: detected: RAS Extension Support [ 0.164205] CPU features: detected: CRC32 instructions [ 0.164218] CPU features: detected: 32-bit EL1 Support [ 0.230971] CPU: All CPU(s) started at EL2 [ 0.236446] devtmpfs: initialized [ 0.299678] Registered cp15_barrier emulation handler [ 0.299748] Registered setend emulation handler [ 0.299808] KASLR enabled [ 0.300106] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.300163] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.302444] pinctrl core: initialized pinctrl subsystem [ 0.303462] SMBIOS 3.0.0 present. [ 0.303511] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.304502] NET: Registered protocol family 16 [ 0.307276] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.308031] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.309114] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.309222] audit: initializing netlink subsys (disabled) [ 0.309681] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1 [ 0.310222] thermal_sys: Registered thermal governor 'step_wise' [ 0.310233] thermal_sys: Registered thermal governor 'power_allocator' [ 0.310269] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.313519] cpuidle: using governor menu [ 0.314025] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.314712] ASID allocator initialised with 32768 entries [ 0.315007] Serial: AMBA PL011 UART driver [ 0.318410] Tegra reboot handler registered. [ 0.380590] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.380807] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.380999] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.381045] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.381182] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.381245] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.381377] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.381421] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.381538] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.381583] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.383921] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.383971] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.384022] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.384050] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.384089] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.384141] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.384165] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.384189] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.384217] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.384240] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.384263] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.384287] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.384310] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.384333] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.384356] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.384379] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.384403] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.384487] mc-err: mcerr ops are set to t19x [ 0.395185] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.395208] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.395220] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.395232] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.402661] ACPI: Interpreter disabled. [ 0.403806] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.405017] iommu: Default domain type: Translated [ 0.405106] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.405443] SCSI subsystem initialized [ 0.405620] usbcore: registered new interface driver usbfs [ 0.405655] usbcore: registered new interface driver hub [ 0.405703] usbcore: registered new device driver usb [ 0.406092] mc: Linux media interface: v0.10 [ 0.406121] videodev: Linux video capture interface: v2.00 [ 0.406402] pps_core: LinuxPPS API ver. 1 registered [ 0.406416] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.406456] PTP clock support registered [ 0.406657] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.406981] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.407066] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.407622] Registered efivars operations [ 0.413059] FPGA manager framework [ 0.413178] Advanced Linux Sound Architecture Driver Initialized. [ 0.413755] Bluetooth: Core ver 2.22 [ 0.413793] NET: Registered protocol family 31 [ 0.413806] Bluetooth: HCI device and connection manager initialized [ 0.413821] Bluetooth: HCI socket layer initialized [ 0.413833] Bluetooth: L2CAP socket layer initialized [ 0.413871] Bluetooth: SCO socket layer initialized [ 0.415883] camchar: rtcpu character device driver loaded [ 0.416503] clocksource: Switched to clocksource arch_sys_counter [ 0.708595] VFS: Disk quotas dquot_6.6.0 [ 0.708676] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.709068] pnp: PnP ACPI: disabled [ 0.721053] la/ptsa driver initialized. [ 0.721192] NET: Registered protocol family 2 [ 0.721356] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.726587] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.726657] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.726971] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.727407] TCP: Hash tables configured (established 65536 bind 65536) [ 0.727538] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.727627] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.727874] NET: Registered protocol family 1 [ 0.728859] RPC: Registered named UNIX socket transport module. [ 0.728929] RPC: Registered udp transport module. [ 0.728948] RPC: Registered tcp transport module. [ 0.728964] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.728991] PCI: CLS 0 bytes, default 64 [ 0.729302] Trying to unpack rootfs image as initramfs... [ 0.922028] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.924169] Freeing initrd memory: 8196K [ 0.927953] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.928024] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.928088] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.928473] kvm [1]: IPA Size Limit: 40 bits [ 0.929132] kvm [1]: vgic interrupt IRQ9 [ 0.929698] kvm [1]: VHE mode initialized successfully [ 0.931279] Initialise system trusted keyrings [ 0.931652] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.936813] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.937658] NFS: Registering the id_resolver key type [ 0.937705] Key type id_resolver registered [ 0.937727] Key type id_legacy registered [ 0.937826] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.937868] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.937918] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.948234] NET: Registered protocol family 38 [ 0.948266] Key type asymmetric registered [ 0.948290] Asymmetric key parser 'x509' registered [ 0.948364] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.948676] io scheduler mq-deadline registered [ 0.948707] io scheduler kyber registered [ 0.953262] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.955368] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.955459] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.955522] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.955583] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.955643] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.959472] scrncapt: init (heads:4 wins:6 planes:4) [ 0.959573] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.960436] EINJ: ACPI disabled. [ 0.962900] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.962932] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.962948] tegra-pmc: ### PMC reset level: L1 [ 0.962968] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.963033] tegra-pmc: PMC Prod config success [ 0.966810] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.971095] random: fast init done [ 0.971179] printk: console [ttyTCU0] enabled [ 2.524072] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.528421] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.533035] arm-smmu 10000000.iommu: stage 1 translation [ 2.538518] arm-smmu 10000000.iommu: stage 2 translation [ 2.543694] arm-smmu 10000000.iommu: nested translation [ 2.549319] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.556475] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.566751] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.569346] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.576150] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.583809] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.589194] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.593664] arm-smmu 12000000.iommu: stage 1 translation [ 2.599419] arm-smmu 12000000.iommu: stage 2 translation [ 2.604848] arm-smmu 12000000.iommu: nested translation [ 2.610017] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.617203] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.627410] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.630316] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.636877] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.644764] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.654288] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.657616] tegra_profiler: auth: init [ 2.661837] THERMAL EST: found 3 subdevs [ 2.665243] THERMAL EST num_resources: 0 [ 2.669073] [THERMAL EST subdev 0] [ 2.672119] [THERMAL EST subdev 1] [ 2.675813] [THERMAL EST subdev 2] [ 2.678861] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.685283] THERMAL EST: thz register success. [ 2.689755] THERMAL EST: end of probe, return err: 0 [ 2.695057] nvsciipc: loaded module [ 2.702327] tun: Universal TUN/TAP device driver, 1.6 [ 2.704669] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.710810] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.716138] e1000e: Intel(R) PRO/1000 Network Driver [ 2.721094] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.727154] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.732449] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.738906] PPP generic driver version 2.4.2 [ 2.743118] PPP BSD Compression module registered [ 2.747665] PPP Deflate Compression module registered [ 2.752911] PPP MPPE Compression module registered [ 2.757944] usbcore: registered new interface driver r8152 [ 2.763431] usbcore: registered new interface driver asix [ 2.768770] usbcore: registered new interface driver ax88179_178a [ 2.774886] usbcore: registered new interface driver cdc_ether [ 2.780848] usbcore: registered new interface driver net1080 [ 2.786433] usbcore: registered new interface driver cdc_subset [ 2.792215] usbcore: registered new interface driver zaurus [ 2.798181] usbcore: registered new interface driver cdc_ncm [ 2.803847] usbcore: registered new interface driver aqc111 [ 2.809483] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.815566] ohci-pci: OHCI PCI platform driver [ 2.819605] ohci-platform: OHCI generic platform driver [ 2.825547] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.832044] usbcore: registered new interface driver uas [ 2.835907] usbcore: registered new interface driver usb-storage [ 2.842345] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.848017] mousedev: PS/2 mouse device common for all mice [ 2.853352] usbcore: registered new interface driver xpad [ 2.861153] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.864030] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.871854] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.878446] i2c /dev entries driver [ 2.881537] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.887538] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.893081] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.898026] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.903819] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.909357] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.914333] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.927425] device-mapper: uevent: version 1.0.3 [ 2.927875] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.934970] cpuidle: Initializing cpuidle driver [ 2.938649] sdhci: Secure Digital Host Controller Interface driver [ 2.943671] sdhci: Copyright(c) Pierre Ossman [ 2.947514] Synopsys Designware Multimedia Card Interface Driver [ 2.953954] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.959629] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.960543] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.973042] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.995538] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.004984] vdd-1v0: supplied by regulator-dummy [ 3.010431] vdd-1v8-hs: supplied by regulator-dummy [ 3.015251] vdd-1v8-ls: supplied by regulator-dummy [ 3.020092] vdd-1v8-ao: supplied by regulator-dummy [ 3.023972] vddio-ddr-1v1: supplied by regulator-dummy [ 3.028443] vdd-rtc: supplied by regulator-dummy [ 3.030165] spmic-ldo1: supplied by regulator-dummy [ 3.031403] vdd-ao-3v3: supplied by regulator-dummy [ 3.037616] vddio-emmc-3v3: supplied by regulator-dummy [ 3.043891] spmic-ldo4: supplied by regulator-dummy [ 3.045160] vdd-usb-3v3: supplied by regulator-dummy [ 3.051334] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.057555] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.063185] spmic-ldo8: supplied by vdd-1v8-ls [ 3.064777] gpio-510 (gpio_default): hogged as output/high [ 3.066141] gpio-511 (gpio_default): hogged as output/high [ 3.069038] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.205380] max77686-rtc max77620-rtc: registered as rtc0 [ 3.206425] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.206824] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.032200] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.033504] hid: raw HID events driver (C) Jiri Kosina [ 4.034238] usbcore: registered new interface driver usbhid [ 4.034378] usbhid: USB HID core driver [ 4.036294] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.037459] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.831863] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.906841] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 75.788 ms) ÿá[ 4.122292] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.122925] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.123984] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.124830] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.126620] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.127276] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.127835] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.129188] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.129464] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.131382] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.138624] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.144800] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.150099] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.156018] denver_knobs_init:MTS_VERSION:55637613 [ 4.169055] t19x_cache tegra-cache: probed [ 4.171598] optee: probing for conduit method. [ 4.172408] optee: revision 3.16 (65cc2218) [ 4.173406] optee: dynamic shared memory is enabled [ 4.177114] optee: initialized driver [ 4.184161] nvpmodel: initialized successfully [ 4.185109] tegra_hv: get_hvd: not initialized yet [ 4.189462] user_ivc_mempool: hypervisor not present [ 4.196042] usbcore: registered new interface driver snd-usb-audio [ 4.202057] u32 classifier [ 4.203263] input device check on [ 4.207102] Actions configured [ 4.210286] Initializing XFRM netlink socket [ 4.215256] NET: Registered protocol family 10 [ 4.221363] Segment Routing with IPv6 [ 4.222593] NET: Registered protocol family 17 [ 4.226923] NET: Registered protocol family 15 [ 4.231520] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.244962] Bluetooth: RFCOMM socket layer initialized [ 4.249842] Bluetooth: RFCOMM ver 1.11 [ 4.253497] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.259594] Bluetooth: HIDP socket layer initialized [ 4.265405] 9pnet: Installing 9P2000 support [ 4.269015] Key type dns_resolver registered [ 4.274364] registered taskstats version 1 [ 4.277464] Loading compiled-in X.509 certificates [ 4.288286] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.293413] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.302598] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.305168] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.313937] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.322132] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.436528] tegra194-pcie 14160000.pcie: Link up [ 4.439169] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.439373] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.439519] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.439752] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.439947] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.440312] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.440782] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.450313] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.450864] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.451424] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.453060] pci 0004:01:00.0: supports D1 D2 [ 4.453278] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.461448] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.461807] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.462050] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.462425] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.462661] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.465234] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.471089] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.478457] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.487314] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.496954] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.501942] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.507679] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.514371] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.523589] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.525086] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.533800] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.542242] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.644687] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.645333] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.645549] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.645717] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.646000] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.646220] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.646617] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.647022] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.662837] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.663328] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.665373] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.666714] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.668477] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.670338] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.671221] pci 0005:00:00.0: Removing from iommu group 7 [ 5.671505] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.704923] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.726812] host1x 13e10000.host1x: initialized [ 5.728792] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.729755] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.730749] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.731393] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.732161] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.732871] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.733657] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.734262] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.737791] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.745004] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.754941] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.761890] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.771739] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.778791] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.788736] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.795505] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.805692] falcon 15340000.vic: Adding to iommu group 17 [ 5.820406] falcon 15340000.vic: initialized [ 5.821443] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.826692] falcon 15380000.nvjpg: initialized [ 5.827242] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.837441] falcon 154c0000.nvenc: initialized [ 5.838080] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.848628] falcon 15a80000.nvenc1: initialized [ 5.849359] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.860927] nvdec 15480000.nvdec: initialized [ 5.861674] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.872079] nvdec 15140000.nvdec1: initialized [ 5.872744] tsec 15500000.tsec: Adding to iommu group 18 [ 5.878619] tsec 15500000.tsec: initialized [ 5.879170] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.885715] tsec 15100000.tsecb: initialized [ 5.889595] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.915554] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.927449] gpio-374 (wifi-enable): hogged as output/high [ 5.927736] gpio-431 (camera-control-output-low): hogged as output/low [ 5.928109] gpio-432 (camera-control-output-low): hogged as output/low [ 5.929824] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.931548] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.932090] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.936868] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.942018] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.947874] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.953345] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.961379] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.969266] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.980849] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.986063] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.991708] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.000830] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.009896] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.017438] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.024676] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.031250] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.040657] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.047088] pva 16000000.pva0: Adding to iommu group 22 [ 6.072809] pva 16000000.pva0: initialized [ 6.077679] pva 16800000.pva1: Adding to iommu group 23 [ 6.089007] pva 16800000.pva1: initialized [ 6.093836] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.105555] nvdla 15880000.nvdla0: initialized [ 6.106943] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.115529] nvdla 158c0000.nvdla1: initialized [ 6.118172] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.118469] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.118479] tegradc 15200000.display: Adding to iommu group 26 [ 6.118753] tegradccommon 15200000.display-hub: dma mapping done [ 6.126442] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.126868] generic_infoframe_type: 0x87 [ 6.127154] tegradc 15200000.display: DT parsed successfully [ 6.127494] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.136724] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.137759] tegradc 15210000.display: Adding to iommu group 26 [ 6.142927] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.155323] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.161011] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.166299] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.166421] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.174658] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.180178] tegra_cec 3960000.tegra_cec: probed [ 6.181041] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.188409] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.199238] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.209293] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.213006] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.226415] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.226678] kfuse 3830000.kfuse: initialized [ 6.241358] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.247349] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.248031] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.254760] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.267756] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.268023] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.275951] tegradc 15210000.display: disp0 connected to head1->sor [ 6.285747] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.289583] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.295327] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.302343] tegradc 15210000.display: DT parsed successfully [ 6.311858] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.316272] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.330701] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.350862] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.351193] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.354062] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.362168] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.370924] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.377674] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.385061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.392554] usb usb1: Product: xHCI Host Controller [ 6.397210] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.403726] usb usb1: SerialNumber: 3610000.xhci [ 6.409883] hub 1-0:1.0: USB hub found [ 6.412303] hub 1-0:1.0: 4 ports detected [ 6.416744] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.421459] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.429329] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.436946] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.444644] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.451852] usb usb2: Product: xHCI Host Controller [ 6.456840] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.463306] usb usb2: SerialNumber: 3610000.xhci [ 6.469181] hub 2-0:1.0: USB hub found [ 6.471547] hub 2-0:1.0: 4 ports detected [ 6.517006] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.523603] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.525401] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.525632] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.538314] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.539374] tegra194-cpufreq ccplex: probed with BWMGR [ 6.540516] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.541220] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.541644] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.543035] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.550541] mmc0: CQHCI version 5.10 [ 6.551116] tegra194-vi5 15c10000.vi: initialized [ 6.552594] tegradc 15210000.display: disp0 connected to head1->sor [ 6.553724] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.555595] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.561900] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.568751] tegradc 15210000.display: DT parsed successfully [ 6.576675] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.582348] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.588952] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.588962] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.596735] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.603238] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.609828] generic_infoframe_type: 0x87 [ 6.627143] tegradc 15200000.display: DT parsed successfully [ 6.632734] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.632741] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.632749] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.641674] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.647193] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.653543] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.653890] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.676549] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.676734] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.700834] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.700877] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.706250] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.713510] nvethernet 2490000.ethernet: Macsec not supported [ 6.726039] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.726211] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.734615] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.749655] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.750551] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.756738] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.764388] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.774807] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.776184] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.778634] ************************************** [ 6.778638] CPU:0, Error:cbb-noc [ 6.778642] Error Logger : 0 [ 6.778652] ErrLog0 : 0x80030000 [ 6.778655] Transaction Type : RD - Read, Incrementing [ 6.778657] Error Code : SLV [ 6.778660] Error Source : Target [ 6.778663] Error Description : Target error detected by CBB slave [ 6.778679] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.830789] Packet header Lock : 0 [ 6.834716] Packet header Len1 : 3 [ 6.838048] NOC protocol version : version >= 2.7 [ 6.843292] ErrLog1 : 0x352426 [ 6.846359] ErrLog2 : 0x0 [ 6.849246] RouteId : 0x352426 [ 6.852918] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.857476] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.862285] TargSubRange : 18 [ 6.865779] SeqId : 0 [ 6.868579] ErrLog3 : 0x4045c [ 6.871559] ErrLog4 : 0x0 [ 6.874706] Address accessed : 0x15b4045c [ 6.878911] ErrLog5 : 0x989f851 [ 6.882147] Non-Modify : 0x1 [ 6.885817] AXI ID : 0x13 [ 6.888709] Master ID : CCPLEX [ 6.892034] Security Group(GRPSEC): 0x7e [ 6.896493] Cache : 0x1 -- Bufferable [ 6.900435] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.907261] FALCONSEC : 0x0 [ 6.910668] Virtual Queuing Channel(VQC): 0x0 [ 6.915307] ************************************** [ 6.920319] ------------[ cut here ]------------ [ 6.924842] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.931156] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.936399] Modules linked in: [ 6.939655] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 6.946280] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.958539] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.964324] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 6.969301] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 6.974017] sp : ffff800010003de0 [ 6.977181] x29: ffff800010003de0 x28: 0000000000000001 [ 6.982604] x27: 0000000000000005 x26: ffffa5a9dd6e3f58 [ 6.988029] x25: ffffa5a9de03ce10 x24: 0000000000000001 [ 6.993712] x23: ffffa5a9dd9d7000 x22: ffffa5a9dde5ea00 [ 6.999048] x21: 000000000000000f x20: ffff1e3180ed2d80 [ 7.004562] x19: ffffa5a9dde5ea00 x18: 0000000000000010 [ 7.009986] x17: 0000000000006270 x16: 0000000000004350 [ 7.015325] x15: ffffa5a9ddcd2bf0 x14: 0720072007200720 [ 7.020854] x13: 0720072007200720 x12: 0720072007200720 [ 7.026351] x11: 0720072007200720 x10: 0720072007200720 [ 7.031879] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.037112] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.042623] x5 : 0000000000057fa8 x4 : ffffa5a9ddce7968 [ 7.048304] x3 : 00000000ffffffff x2 : ffffa5a9dc17e090 [ 7.053389] x1 : ffffa5a9ddcd2680 x0 : 0000000100010001 [ 7.058980] Call trace: [ 7.061434] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.065724] __handle_irq_event_percpu+0x68/0x2a0 [ 7.070270] handle_irq_event_percpu+0x40/0xa0 [ 7.074732] handle_irq_event+0x50/0xf0 [ 7.078237] handle_fasteoi_irq+0xc0/0x170 [ 7.082264] generic_handle_irq+0x40/0x60 [ 7.086545] __handle_domain_irq+0x70/0xd0 [ 7.090487] efi_header_end+0xb0/0xf0 [ 7.094245] el1_irq+0xd0/0x180 [ 7.096964] cpuidle_enter_state+0xb8/0x410 [ 7.101162] cpuidle_enter+0x40/0x60 [ 7.104664] call_cpuidle+0x44/0x80 [ 7.108163] do_idle+0x208/0x270 [ 7.111832] cpu_startup_entry+0x2c/0x70 [ 7.115338] rest_init+0xdc/0xe8 [ 7.118579] arch_call_rest_init+0x18/0x20 [ 7.123034] start_kernel+0x514/0x54c [ 7.126108] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.132577] ---[ end trace 70da867c535bbec1 ]--- [ 7.137045] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.144562] SMP: stopping secondary CPUs [ 7.148447] Kernel Offset: 0x25a9cbfc0000 from 0xffff800010000000 [ 7.154792] PHYS_OFFSET: 0xffffe1cf80000000 [ 7.158907] CPU features: 0x8240002,03802a30 [ 7.163109] Memory Limit: none [ 7.166266] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.340] W> Cannot find any partition table for 00000003 [0001.341] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.029] I> Relocating BR-BCT [0002.030] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.337] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.338] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu ÿâclk_dt_late initialized ÿäAÿânoc_late initialized ÿäuÿâpm_post initialized dbells initialized ÿäg 1ÿâdmce initialized cvc initialized ÿä1 03:23:20 Uÿâavfs_clk_mach_post initialized ÿäTC 20ÿâavfs_clk_platform_post initialized ÿä22ÿâcvc_late initialized regulator_post initialized ÿä aarcÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäh64 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.222] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.280] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.338] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.399] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.479] I> register 'maxim' power off handle [0003.481] I> virtual i2c enabled [0003.482] I> registered 'maxim,max20024' pmic [0003.482] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.486] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.493] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.569] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.614] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.631] I> edid read success [0003.643] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.644] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.645] I> width = 720, height = 480, frequency = 26973026 [0003.649] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.683] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.717] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.744] starting app kernel_boot_app [0003.745] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000648] Console: colour dummy device 80x25 [ 0.002109] printk: console [tty0] enabled [ 0.002174] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002210] pid_max: default: 32768 minimum: 301 [ 0.002369] LSM: Security Framework initializing [ 0.002439] Yama: becoming mindful. [ 0.002481] SELinux: Initializing. [ 0.002623] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002664] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005748] rcu: Hierarchical SRCU implementation. [ 0.005995] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006691] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006739] DTB Build time: Aug 10 2022 20:31:49 [ 0.009690] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009940] Remapping and enabling EFI services. [ 0.011977] smp: Bringing up secondary CPUs ... [ 0.043770] Detected PIPT I-cache on CPU1 [ 0.043845] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075872] Detected PIPT I-cache on CPU2 [ 0.075985] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105616] Detected PIPT I-cache on CPU3 [ 0.105754] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135472] Detected PIPT I-cache on CPU4 [ 0.135570] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165346] Detected PIPT I-cache on CPU5 [ 0.165537] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165874] smp: Brought up 1 node, 6 CPUs [ 0.166129] SMP: Total of 6 processors activated. [ 0.166191] CPU features: detected: Privileged Access Never [ 0.166215] CPU features: detected: LSE atomic instructions [ 0.166228] CPU features: detected: User Access Override [ 0.166241] CPU features: detected: 32-bit EL0 Support [ 0.166253] CPU features: detected: RAS Extension Support [ 0.166265] CPU features: detected: CRC32 instructions [ 0.166278] CPU features: detected: 32-bit EL1 Support [ 0.233492] CPU: All CPU(s) started at EL2 [ 0.239881] devtmpfs: initialized [ 0.286132] Registered cp15_barrier emulation handler [ 0.286284] Registered setend emulation handler [ 0.286304] KASLR enabled [ 0.286570] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286596] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287886] pinctrl core: initialized pinctrl subsystem [ 0.288925] SMBIOS 3.0.0 present. [ 0.288954] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289572] NET: Registered protocol family 16 [ 0.291341] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291839] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292542] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292598] audit: initializing netlink subsys (disabled) [ 0.292803] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293259] thermal_sys: Registered thermal governor 'step_wise' [ 0.293266] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293282] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295678] cpuidle: using governor menu [ 0.295995] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296442] ASID allocator initialised with 32768 entries [ 0.296678] Serial: AMBA PL011 UART driver [ 0.300098] Tegra reboot handler registered. [ 0.372856] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.372979] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.373159] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.373197] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.373323] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.373363] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.373489] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.373526] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.373650] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.373689] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.375970] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.376006] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.376033] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.376074] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.376104] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.376144] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.376179] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.376224] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.376247] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.376270] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.376292] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.376315] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.376337] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.376359] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.376381] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.376404] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.376426] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.376505] mc-err: mcerr ops are set to t19x [ 0.388253] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.388275] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.388287] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.388299] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.395051] ACPI: Interpreter disabled. [ 0.396193] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.397467] iommu: Default domain type: Translated [ 0.397528] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.397882] SCSI subsystem initialized [ 0.398030] usbcore: registered new interface driver usbfs [ 0.398074] usbcore: registered new interface driver hub [ 0.398128] usbcore: registered new device driver usb [ 0.398583] mc: Linux media interface: v0.10 [ 0.398615] videodev: Linux video capture interface: v2.00 [ 0.398956] pps_core: LinuxPPS API ver. 1 registered [ 0.398968] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.398988] PTP clock support registered [ 0.399204] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.399496] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.399580] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.400183] Registered efivars operations [ 0.405662] FPGA manager framework [ 0.405787] Advanced Linux Sound Architecture Driver Initialized. [ 0.406341] Bluetooth: Core ver 2.22 [ 0.406378] NET: Registered protocol family 31 [ 0.406391] Bluetooth: HCI device and connection manager initialized [ 0.406411] Bluetooth: HCI socket layer initialized [ 0.406426] Bluetooth: L2CAP socket layer initialized [ 0.406447] Bluetooth: SCO socket layer initialized [ 0.407943] camchar: rtcpu character device driver loaded [ 0.408612] clocksource: Switched to clocksource arch_sys_counter [ 0.763223] VFS: Disk quotas dquot_6.6.0 [ 0.763289] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.763608] pnp: PnP ACPI: disabled [ 0.775804] la/ptsa driver initialized. [ 0.775920] NET: Registered protocol family 2 [ 0.776078] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.780677] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.780786] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.781043] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.781476] TCP: Hash tables configured (established 65536 bind 65536) [ 0.781582] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.781670] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.781883] NET: Registered protocol family 1 [ 0.782396] RPC: Registered named UNIX socket transport module. [ 0.782409] RPC: Registered udp transport module. [ 0.782418] RPC: Registered tcp transport module. [ 0.782427] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.782442] PCI: CLS 0 bytes, default 64 [ 0.782673] Trying to unpack rootfs image as initramfs... [ 0.971627] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.973774] Freeing initrd memory: 8196K [ 0.977521] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.977575] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.977618] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.977992] kvm [1]: IPA Size Limit: 40 bits [ 0.978556] kvm [1]: vgic interrupt IRQ9 [ 0.979089] kvm [1]: VHE mode initialized successfully [ 0.980322] Initialise system trusted keyrings [ 0.980641] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.984982] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.985648] NFS: Registering the id_resolver key type [ 0.985678] Key type id_resolver registered [ 0.985689] Key type id_legacy registered [ 0.985751] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.985791] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.985832] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.997560] NET: Registered protocol family 38 [ 0.997585] Key type asymmetric registered [ 0.997595] Asymmetric key parser 'x509' registered [ 0.997643] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.997857] io scheduler mq-deadline registered [ 0.997871] io scheduler kyber registered [ 1.002135] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.004166] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.004222] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.004270] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.004317] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.004364] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.008277] scrncapt: init (heads:4 wins:6 planes:4) [ 1.008658] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.009223] EINJ: ACPI disabled. [ 1.011645] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.011666] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.011676] tegra-pmc: ### PMC reset level: L1 [ 1.011685] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.011718] tegra-pmc: PMC Prod config success [ 1.015959] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.020048] random: fast init done [ 1.020178] printk: console [ttyTCU0] enabled [ 2.573048] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.576862] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.581624] arm-smmu 10000000.iommu: stage 1 translation [ 2.586876] arm-smmu 10000000.iommu: stage 2 translation [ 2.592648] arm-smmu 10000000.iommu: nested translation [ 2.597993] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.605169] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.616662] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.618266] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.625115] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.632780] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.637896] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.642875] arm-smmu 12000000.iommu: stage 1 translation [ 2.648154] arm-smmu 12000000.iommu: stage 2 translation [ 2.653810] arm-smmu 12000000.iommu: nested translation [ 2.659264] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.666161] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.677344] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.679253] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.685849] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.693442] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.703224] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.706293] tegra_profiler: auth: init [ 2.710466] THERMAL EST: found 3 subdevs [ 2.713936] THERMAL EST num_resources: 0 [ 2.718035] [THERMAL EST subdev 0] [ 2.721102] [THERMAL EST subdev 1] [ 2.724490] [THERMAL EST subdev 2] [ 2.728017] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.734203] THERMAL EST: thz register success. [ 2.738462] THERMAL EST: end of probe, return err: 0 [ 2.744082] nvsciipc: loaded module [ 2.751073] tun: Universal TUN/TAP device driver, 1.6 [ 2.753397] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.759517] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.765382] e1000e: Intel(R) PRO/1000 Network Driver [ 2.770013] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.776357] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.781648] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.787901] PPP generic driver version 2.4.2 [ 2.792104] PPP BSD Compression module registered [ 2.796363] PPP Deflate Compression module registered [ 2.801613] PPP MPPE Compression module registered [ 2.806893] usbcore: registered new interface driver r8152 [ 2.812396] usbcore: registered new interface driver asix [ 2.817742] usbcore: registered new interface driver ax88179_178a [ 2.823593] usbcore: registered new interface driver cdc_ether [ 2.829546] usbcore: registered new interface driver net1080 [ 2.835168] usbcore: registered new interface driver cdc_subset [ 2.841484] usbcore: registered new interface driver zaurus [ 2.847141] usbcore: registered new interface driver cdc_ncm [ 2.852555] usbcore: registered new interface driver aqc111 [ 2.858476] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.864541] ohci-pci: OHCI PCI platform driver [ 2.868630] ohci-platform: OHCI generic platform driver [ 2.874495] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.880785] usbcore: registered new interface driver uas [ 2.884875] usbcore: registered new interface driver usb-storage [ 2.891097] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.897377] mousedev: PS/2 mouse device common for all mice [ 2.902021] usbcore: registered new interface driver xpad [ 2.910189] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.913038] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.920836] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.927072] i2c /dev entries driver [ 2.930456] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.936367] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.941954] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.947012] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.952744] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.958157] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.963297] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.977513] device-mapper: uevent: version 1.0.3 [ 2.978019] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.983939] cpuidle: Initializing cpuidle driver [ 2.987854] sdhci: Secure Digital Host Controller Interface driver [ 2.992641] sdhci: Copyright(c) Pierre Ossman [ 2.996726] Synopsys Designware Multimedia Card Interface Driver [ 3.002928] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.009011] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.009828] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.021822] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.044460] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.054481] vdd-1v0: supplied by regulator-dummy [ 3.060104] vdd-1v8-hs: supplied by regulator-dummy [ 3.065063] vdd-1v8-ls: supplied by regulator-dummy [ 3.069995] vdd-1v8-ao: supplied by regulator-dummy [ 3.074055] vddio-ddr-1v1: supplied by regulator-dummy [ 3.078700] vdd-rtc: supplied by regulator-dummy [ 3.080565] spmic-ldo1: supplied by regulator-dummy [ 3.081964] vdd-ao-3v3: supplied by regulator-dummy [ 3.088186] vddio-emmc-3v3: supplied by regulator-dummy [ 3.094556] spmic-ldo4: supplied by regulator-dummy [ 3.095890] vdd-usb-3v3: supplied by regulator-dummy [ 3.102262] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.108527] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.114255] spmic-ldo8: supplied by vdd-1v8-ls [ 3.115796] gpio-510 (gpio_default): hogged as output/high [ 3.117276] gpio-511 (gpio_default): hogged as output/high [ 3.120328] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.256546] max77686-rtc max77620-rtc: registered as rtc0 [ 3.258021] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.258395] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.094700] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.095970] hid: raw HID events driver (C) Jiri Kosina [ 4.096839] usbcore: registered new interface driver usbhid [ 4.096987] usbhid: USB HID core driver [ 4.099056] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.100300] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.150170] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.224932] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 75.573 ms) ÿá[ 4.185173] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.185933] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.187208] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.188180] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.190559] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.191281] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.191979] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.193905] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.194325] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.196321] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.201126] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.207489] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.213402] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.219611] denver_knobs_init:MTS_VERSION:55637613 [ 4.232133] t19x_cache tegra-cache: probed [ 4.235069] optee: probing for conduit method. [ 4.236005] optee: revision 3.16 (65cc2218) [ 4.237657] optee: dynamic shared memory is enabled [ 4.239821] optee: initialized driver [ 4.246716] nvpmodel: initialized successfully [ 4.247334] tegra_hv: get_hvd: not initialized yet [ 4.252275] user_ivc_mempool: hypervisor not present [ 4.258705] usbcore: registered new interface driver snd-usb-audio [ 4.265119] u32 classifier [ 4.265946] input device check on [ 4.269878] Actions configured [ 4.273306] Initializing XFRM netlink socket [ 4.278101] NET: Registered protocol family 10 [ 4.284691] Segment Routing with IPv6 [ 4.285281] NET: Registered protocol family 17 [ 4.289834] NET: Registered protocol family 15 [ 4.293994] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.308248] Bluetooth: RFCOMM socket layer initialized [ 4.312694] Bluetooth: RFCOMM ver 1.11 [ 4.316365] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.321993] Bluetooth: HIDP socket layer initialized [ 4.327992] 9pnet: Installing 9P2000 support [ 4.331428] Key type dns_resolver registered [ 4.337268] registered taskstats version 1 [ 4.340073] Loading compiled-in X.509 certificates [ 4.353484] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.356394] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.366739] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.368062] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.376697] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.384956] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.500814] tegra194-pcie 14160000.pcie: Link up [ 4.503938] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.504193] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.504397] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.504870] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.505072] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.505445] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.505905] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.516551] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.517372] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.517859] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.519324] pci 0004:01:00.0: supports D1 D2 [ 4.519494] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.528418] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.529118] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.529476] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.529915] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.530160] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.530411] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.535503] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.542803] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.551637] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.561925] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.566347] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.572122] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.578981] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.589365] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.589711] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.597952] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.606387] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.708821] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.709478] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.709693] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.709847] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.710137] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.710341] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.710745] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.711202] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.726843] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.727166] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.729322] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.730502] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.732335] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.734366] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.735222] pci 0005:00:00.0: Removing from iommu group 7 [ 5.735465] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.765236] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.788149] host1x 13e10000.host1x: initialized [ 5.790073] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.791092] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.792050] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.792977] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.793690] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.794258] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.794914] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.795521] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.801738] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.808705] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.818614] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.825684] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.835520] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.842816] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.852965] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.859724] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.869896] falcon 15340000.vic: Adding to iommu group 17 [ 5.883333] falcon 15340000.vic: initialized [ 5.884443] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.889952] falcon 15380000.nvjpg: initialized [ 5.890507] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.902354] falcon 154c0000.nvenc: initialized [ 5.902972] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.912457] falcon 15a80000.nvenc1: initialized [ 5.913206] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.924895] nvdec 15480000.nvdec: initialized [ 5.925569] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.934665] nvdec 15140000.nvdec1: initialized [ 5.935251] tsec 15500000.tsec: Adding to iommu group 18 [ 5.941227] tsec 15500000.tsec: initialized [ 5.941880] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.949613] tsec 15100000.tsecb: initialized [ 5.954030] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.977495] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.990154] gpio-374 (wifi-enable): hogged as output/high [ 5.990448] gpio-431 (camera-control-output-low): hogged as output/low [ 5.990768] gpio-432 (camera-control-output-low): hogged as output/low [ 5.992505] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.994574] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.995109] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.001703] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.006375] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.012046] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.017742] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.025899] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.033582] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.044550] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.050354] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.055906] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.064951] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.074068] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.082421] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.089165] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.095059] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.104978] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.110978] pva 16000000.pva0: Adding to iommu group 22 [ 6.136832] pva 16000000.pva0: initialized [ 6.142001] pva 16800000.pva1: Adding to iommu group 23 [ 6.152487] pva 16800000.pva1: initialized [ 6.158048] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.170691] nvdla 15880000.nvdla0: initialized [ 6.172144] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.188036] nvdla 158c0000.nvdla1: initialized [ 6.190671] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.190990] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.191962] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.192809] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.192902] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.193389] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.193551] tegradc 15200000.display: Adding to iommu group 26 [ 6.193598] tegradc 15210000.display: Adding to iommu group 26 [ 6.193857] tegradccommon 15200000.display-hub: dma mapping done [ 6.194120] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.194132] tegra_cec 3960000.tegra_cec: probed [ 6.195247] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.201728] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.208906] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.212542] generic_infoframe_type: 0x87 [ 6.217264] kfuse 3830000.kfuse: initialized [ 6.222558] tegradc 15200000.display: DT parsed successfully [ 6.229793] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.236097] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.239633] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.270924] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.271668] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.278822] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.278849] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.285903] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.310310] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.312029] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.316007] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.328361] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.329027] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.348975] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.354887] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.355196] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.370225] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.383068] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.386180] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.391941] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.400110] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.408812] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.415113] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.423002] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.430288] usb usb1: Product: xHCI Host Controller [ 6.435211] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.441349] usb usb1: SerialNumber: 3610000.xhci [ 6.447435] hub 1-0:1.0: USB hub found [ 6.449911] hub 1-0:1.0: 4 ports detected [ 6.454640] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.459149] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.466635] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.474660] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.482173] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.489408] usb usb2: Product: xHCI Host Controller [ 6.494640] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.500885] usb usb2: SerialNumber: 3610000.xhci [ 6.506922] hub 2-0:1.0: USB hub found [ 6.509346] hub 2-0:1.0: 4 ports detected [ 6.553148] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.559584] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.561040] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.561241] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.574753] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.575788] tegra194-cpufreq ccplex: probed with BWMGR [ 6.576981] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.577647] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.578144] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.579333] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.586799] tegra194-vi5 15c10000.vi: initialized [ 6.587089] mmc0: CQHCI version 5.10 [ 6.588682] tegradc 15210000.display: disp0 connected to head1->sor [ 6.589824] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.592756] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.599408] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.606653] tegradc 15210000.display: DT parsed successfully [ 6.614213] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.619904] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.626493] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.626498] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.626503] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.632675] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.634285] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.640774] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.640781] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.642008] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.647615] generic_infoframe_type: 0x87 [ 6.660392] tegradc 15200000.display: DT parsed successfully [ 6.662479] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.673604] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.680735] nvethernet 2490000.ethernet: Macsec not supported [ 6.682075] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.688793] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.693386] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.697818] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.705699] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.713634] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.714054] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.716722] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.719313] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.727307] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.736869] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.741122] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.751367] tegra-se-nvhost 15810000.se: initialized [ 6.817481] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.817708] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.820025] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.822362] tegradc 15200000.display: probed [ 6.823346] mmc0: Command Queue Engine enabled [ 6.823351] mmc0: periodic cache flush enabled [ 6.823366] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.823785] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.823930] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.826787] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.828384] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.880378] Console: switching to colour frame buffer device 240x67 [ 6.880762] tegra-se-nvhost 15820000.se: initialized [ 6.884708] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.884716] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.884720] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.884723] usb 1-2: Manufacturer: Generic [ 6.886221] tegradc 15200000.display: fb registered [ 6.886882] hub 1-2:1.0: USB hub found [ 6.887965] hub 1-2:1.0: 4 ports detected [ 6.893281] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.899481] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.907014] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.912079] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.915901] tegra-se-nvhost 15830000.se: initialized [ 6.920442] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.925444] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.970109] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.976226] tegra-se-nvhost 15840000.se: initialized [ 6.982445] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.988286] tegra_actmon d230000.actmon: in actmon_register()... [ 6.992786] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.997130] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.998304] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.007487] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.009603] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.015245] hvc_sysfs: hypervisor is not present [ 7.022517] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.023092] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.046002] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.049724] Extcon AUX1(HDMI) enable [ 7.056725] tegradc 15210000.display: disp1 connected to head1->sor [ 7.057831] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.061530] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.068018] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.075276] tegradc 15210000.display: DT parsed successfully [ 7.082212] usb 2-3: Manufacturer: Generic [ 7.087226] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.101888] ALSA device list: [ 7.103322] hub 2-3:1.0: USB hub found [ 7.105256] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.105483] hub 2-3:1.0: 4 ports detected [ 7.108251] No soundcards found. [ 7.112121] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.138854] tegradc 15210000.display: probed [ 7.139230] tegradc 15210000.display: fb registered [ 7.144668] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.148585] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.156139] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.157725] Freeing unused kernel memory: 3968K [ 7.164658] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.172876] tegradc 15210000.display: blank - powerdown [ 7.176762] Run /init as init process [ 7.177808] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.189799] Extcon DP: HPD disabled ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.193183] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.193196] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.193203] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.193315] tegradc 15200000.display: blank - powerdown [ 7.200680] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.230841] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.230846] Extcon AUX1(HDMI) disable [ 7.254125] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.254941] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.265205] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.265212] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.266478] tegradc 15200000.display: unblank [ 7.267488] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.267676] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.273624] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.275468] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.279580] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.279584] Extcon AUX1(HDMI) enable [ 7.292229] tegradc 15200000.display: sync windows ret = 247 [ 7.325751] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.327243] Extcon HDMI: HPD enabled [ 7.329124] tegradc 15200000.display: hdmi: plugged [ 7.338009] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.342515] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.349863] usb 1-3: Product: Bluetooth Radio [ 7.354305] usb 1-3: Manufacturer: Realtek [ 7.358505] usb 1-3: SerialNumber: 00e04c000001 [ 7.379230] Root device found: mmcblk0p1 [ 7.382645] Found dev node: /dev/mmcblk0p1 [ 7.418709] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.424139] Rootfs mounted over mmcblk0p1 [ 7.460492] Switching from initrd to actual rootfs [ 7.602701] systemd[1]: System time before build time, advancing clock. [ 7.675259] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.680512] systemd[1]: Detected architecture arm64. [ 7.735152] systemd[1]: Set hostname to . [ 7.901652] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.203196] random: crng init done [ 8.242955] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.244862] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.250697] systemd[1]: Created slice system-modprobe.slice. [ 8.255651] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.259971] systemd[1]: Created slice User and Session Slice. [ 8.263527] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.267798] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.271476] systemd[1]: Reached target User and Group Name Lookups. [ 8.274861] systemd[1]: Reached target Slices. [ 8.278098] systemd[1]: Reached target Swap. [ 8.282286] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.286126] systemd[1]: Listening on Syslog Socket. [ 8.289927] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.293438] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.297618] systemd[1]: Listening on Journal Audit Socket. [ 8.301234] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.305058] systemd[1]: Listening on Journal Socket. [ 8.308762] systemd[1]: Listening on udev Control Socket. [ 8.314370] systemd[1]: Listening on udev Kernel Socket. [ 8.323173] systemd[1]: Mounting Huge Pages File System... [ 8.331101] systemd[1]: Mounting POSIX Message Queue File System... [ 8.338996] systemd[1]: Mounting RPC Pipe File System... [ 8.347291] systemd[1]: Mounting Kernel Debug File System... [ 8.355748] systemd[1]: Mounting Kernel Trace File System... [ 8.365592] systemd[1]: Starting Journal Service... [ 8.374675] systemd[1]: Starting Set the console keyboard layout... [ 8.382867] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.386415] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.392796] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.401068] systemd[1]: Started Nameserver information manager. [ 8.405796] systemd[1]: Reached target Network (Pre). [ 8.413378] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.415428] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.424213] systemd[1]: Starting Load Kernel Modules... [ 8.432118] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.440758] systemd[1]: Starting udev Coldplug all Devices... [ 8.452074] systemd[1]: Mounted Huge Pages File System. [ 8.455979] systemd[1]: Mounted POSIX Message Queue File System. [ 8.459680] systemd[1]: Mounted RPC Pipe File System. [ 8.463590] systemd[1]: Mounted Kernel Debug File System. [ 8.464199] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.466984] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.466992] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.467004] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.467014] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.467258] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.467488] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.467651] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.467661] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.473673] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.484367] systemd[1]: Mounted Kernel Trace File System. [ 8.491336] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.497271] systemd[1]: nvfb-udev.service: Succeeded. [ 8.502424] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.515284] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.527244] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.529337] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.537664] systemd[1]: Starting Load/Save Random Seed... [ 8.546025] systemd[1]: Starting Create System Users... [ 8.583301] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.583301] [ 8.594104] systemd[1]: Finished Load/Save Random Seed. [ 8.606469] systemd[1]: Finished Create System Users. [ 8.613271] systemd[1]: Finished Load Kernel Modules. [ 8.617634] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.624574] systemd[1]: Mounting Kernel Configuration File System... [ 8.633709] systemd[1]: Started OP-TEE Client Supplicant. [ 8.642039] systemd[1]: Starting Apply Kernel Variables... [ 8.650837] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.661733] systemd[1]: Finished Set the console keyboard layout. [ 8.665987] systemd[1]: Mounted Kernel Configuration File System. [ 9.995964] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.004146] imx219 9-0010: board setup failed [ 10.005885] imx219: probe of 9-0010 failed with error -121 [ 10.018395] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.030008] imx219 10-0010: board setup failed [ 10.031453] imx219: probe of 10-0010 failed with error -121 [ 10.090742] hot-surface-alert cooling state: 0 -> 1 [ 10.975471] using random self ethernet address [ 10.988748] using random host ethernet address [ 11.729042] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.730833] Creating 1 MTD partitions on "spi6.0": [ 11.730845] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.318444] using random self ethernet address [ 12.320073] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.816046] nvidia: loading out-of-tree module taints kernel. [ 58.498437] watchdog: watchdog0: watchdog did not stop! [ 58.929411] Trying to unregister non-registered hwtime source [ 61.995731] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.997831] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr buÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.358] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized ÿä:ÿâpm_post initialized dbells initialized ÿä23:ÿâdmce initialized cvc initialized ÿä20 UTC 2022 aÿâavfs_clk_mach_post initialized ÿäarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.420] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.610] W> set volts not configured for 'vdd-1v0' [0003.617] W> set volts not configured for 'vdd-1v8-hs' [0003.617] I> retrieved tmds range from prod_list_hdmi_soc [0003.625] E> invalid display type [0003.626] E> cannot find any other nvdisp nodes [0003.643] I> edid read success [0003.655] I> edid read success [0003.656] I> width = 640, height = 480, frequency = 25174825 [0003.656] I> width = 1920, height = 1080, frequency = 148500000 [0003.657] I> width = 1280, height = 768, frequency = 79500000 [0003.657] I> width = 1360, height = 768, frequency = 85500000 [0003.657] I> width = 720, height = 480, frequency = 26973026 [0003.661] I> width = 720, height = 576, frequency = 26973026 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1280, height = 720, frequency = 74175824 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 1920, height = 1080, frequency = 148351648 [0003.690] I> width = 720, height = 480, frequency = 26973026 [0003.695] I> width = 720, height = 576, frequency = 26973026 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 3840, height = 2160, frequency = 296703296 [0003.724] I> width = 4096, height = 2160, frequency = 296703296 [0003.730] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.741] I> hdmi_enable, starting HDMI initialisation [0003.746] I> hdmi_enable, HDMI initialisation complete [0003.755] initializing target [0003.755] calling apps_init() [0003.756] starting app kernel_boot_app [0003.757] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000689] Console: colour dummy device 80x25 [ 0.002165] printk: console [tty0] enabled [ 0.002227] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002266] pid_max: default: 32768 minimum: 301 [ 0.002435] LSM: Security Framework initializing [ 0.002493] Yama: becoming mindful. [ 0.002534] SELinux: Initializing. [ 0.002685] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002740] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005637] rcu: Hierarchical SRCU implementation. [ 0.005909] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006588] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006634] DTB Build time: Aug 10 2022 20:31:49 [ 0.009369] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009626] Remapping and enabling EFI services. [ 0.011747] smp: Bringing up secondary CPUs ... [ 0.041281] Detected PIPT I-cache on CPU1 [ 0.041379] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070838] Detected PIPT I-cache on CPU2 [ 0.070935] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100607] Detected PIPT I-cache on CPU3 [ 0.100748] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130435] Detected PIPT I-cache on CPU4 [ 0.130589] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160314] Detected PIPT I-cache on CPU5 [ 0.160458] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160823] smp: Brought up 1 node, 6 CPUs [ 0.161107] SMP: Total of 6 processors activated. [ 0.161184] CPU features: detected: Privileged Access Never [ 0.161207] CPU features: detected: LSE atomic instructions [ 0.161221] CPU features: detected: User Access Override [ 0.161235] CPU features: detected: 32-bit EL0 Support [ 0.161248] CPU features: detected: RAS Extension Support [ 0.161262] CPU features: detected: CRC32 instructions [ 0.161275] CPU features: detected: 32-bit EL1 Support [ 0.232294] CPU: All CPU(s) started at EL2 [ 0.237725] devtmpfs: initialized [ 0.288306] Registered cp15_barrier emulation handler [ 0.288446] Registered setend emulation handler [ 0.288471] KASLR enabled [ 0.288749] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288772] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290252] pinctrl core: initialized pinctrl subsystem [ 0.291378] SMBIOS 3.0.0 present. [ 0.291422] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292131] NET: Registered protocol family 16 [ 0.294166] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.294660] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295616] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295679] audit: initializing netlink subsys (disabled) [ 0.295913] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296386] thermal_sys: Registered thermal governor 'step_wise' [ 0.296396] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296411] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299589] cpuidle: using governor menu [ 0.299948] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300418] ASID allocator initialised with 32768 entries [ 0.300671] Serial: AMBA PL011 UART driver [ 0.304174] Tegra reboot handler registered. [ 0.380523] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.380656] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.380849] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.380896] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.381021] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.381063] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.381175] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.381217] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.381360] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.381433] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.383728] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.383767] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.383795] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.383821] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.383848] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.383920] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.383954] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.383979] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.384003] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.384026] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.384049] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.384092] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.384116] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.384155] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.384179] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.384218] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.384242] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.384332] mc-err: mcerr ops are set to t19x [ 0.397204] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.397247] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.397261] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.397273] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.403768] ACPI: Interpreter disabled. [ 0.404977] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.406365] iommu: Default domain type: Translated [ 0.406435] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.406848] SCSI subsystem initialized [ 0.407001] usbcore: registered new interface driver usbfs [ 0.407043] usbcore: registered new interface driver hub [ 0.407077] usbcore: registered new device driver usb [ 0.407546] mc: Linux media interface: v0.10 [ 0.407582] videodev: Linux video capture interface: v2.00 [ 0.407945] pps_core: LinuxPPS API ver. 1 registered [ 0.407957] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.407979] PTP clock support registered [ 0.408221] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.408481] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.408561] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.409187] Registered efivars operations [ 0.414960] FPGA manager framework [ 0.415100] Advanced Linux Sound Architecture Driver Initialized. [ 0.415788] Bluetooth: Core ver 2.22 [ 0.415825] NET: Registered protocol family 31 [ 0.415836] Bluetooth: HCI device and connection manager initialized [ 0.415851] Bluetooth: HCI socket layer initialized [ 0.415872] Bluetooth: L2CAP socket layer initialized [ 0.415893] Bluetooth: SCO socket layer initialized [ 0.417639] camchar: rtcpu character device driver loaded [ 0.418370] clocksource: Switched to clocksource arch_sys_counter [ 0.706634] VFS: Disk quotas dquot_6.6.0 [ 0.706705] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.707043] pnp: PnP ACPI: disabled [ 0.718782] la/ptsa driver initialized. [ 0.718899] NET: Registered protocol family 2 [ 0.719076] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.724740] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.724811] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.725126] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.725556] TCP: Hash tables configured (established 65536 bind 65536) [ 0.725662] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.725749] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.725949] NET: Registered protocol family 1 [ 0.726829] RPC: Registered named UNIX socket transport module. [ 0.726894] RPC: Registered udp transport module. [ 0.726912] RPC: Registered tcp transport module. [ 0.726929] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.726955] PCI: CLS 0 bytes, default 64 [ 0.727240] Trying to unpack rootfs image as initramfs... [ 0.992980] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.995847] Freeing initrd memory: 8196K [ 1.000358] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.000399] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.000441] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.000789] kvm [1]: IPA Size Limit: 40 bits [ 1.001331] kvm [1]: vgic interrupt IRQ9 [ 1.001781] kvm [1]: VHE mode initialized successfully [ 1.003356] Initialise system trusted keyrings [ 1.003656] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.009737] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.010603] NFS: Registering the id_resolver key type [ 1.010639] Key type id_resolver registered [ 1.010653] Key type id_legacy registered [ 1.010732] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.010755] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.010795] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.020712] NET: Registered protocol family 38 [ 1.020736] Key type asymmetric registered [ 1.020753] Asymmetric key parser 'x509' registered [ 1.020800] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.021070] io scheduler mq-deadline registered [ 1.021089] io scheduler kyber registered [ 1.026557] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.029309] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.029389] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.029457] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.029526] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.029597] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.035185] scrncapt: init (heads:4 wins:6 planes:4) [ 1.035477] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.036461] EINJ: ACPI disabled. [ 1.039858] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.039883] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.039927] tegra-pmc: ### PMC reset level: L1 [ 1.039941] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.039992] tegra-pmc: PMC Prod config success [ 1.044944] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.052435] random: fast init done [ 1.061844] printk: console [ttyTCU0] enabled [ 2.602096] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.606635] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.611226] arm-smmu 10000000.iommu: stage 1 translation [ 2.616862] arm-smmu 10000000.iommu: stage 2 translation [ 2.622379] arm-smmu 10000000.iommu: nested translation [ 2.627720] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.634634] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.645511] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.648016] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.654573] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.662293] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.667356] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.672083] arm-smmu 12000000.iommu: stage 1 translation [ 2.677846] arm-smmu 12000000.iommu: stage 2 translation [ 2.683274] arm-smmu 12000000.iommu: nested translation [ 2.688452] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.695626] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.706099] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.709001] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.715331] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.723085] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.732754] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.735747] tegra_profiler: auth: init [ 2.739931] THERMAL EST: found 3 subdevs [ 2.743658] THERMAL EST num_resources: 0 [ 2.747274] [THERMAL EST subdev 0] [ 2.750847] [THERMAL EST subdev 1] [ 2.753959] [THERMAL EST subdev 2] [ 2.757480] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.763964] THERMAL EST: thz register success. [ 2.768178] THERMAL EST: end of probe, return err: 0 [ 2.773150] nvsciipc: loaded module [ 2.780531] tun: Universal TUN/TAP device driver, 1.6 [ 2.782724] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.788978] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.794540] e1000e: Intel(R) PRO/1000 Network Driver [ 2.799736] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.805585] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.811118] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.817284] PPP generic driver version 2.4.2 [ 2.821550] PPP BSD Compression module registered [ 2.826080] PPP Deflate Compression module registered [ 2.831330] PPP MPPE Compression module registered [ 2.836112] usbcore: registered new interface driver r8152 [ 2.841600] usbcore: registered new interface driver asix [ 2.847188] usbcore: registered new interface driver ax88179_178a [ 2.853309] usbcore: registered new interface driver cdc_ether [ 2.859003] usbcore: registered new interface driver net1080 [ 2.864602] usbcore: registered new interface driver cdc_subset [ 2.870913] usbcore: registered new interface driver zaurus [ 2.876600] usbcore: registered new interface driver cdc_ncm [ 2.882273] usbcore: registered new interface driver aqc111 [ 2.887949] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.893987] ohci-pci: OHCI PCI platform driver [ 2.898038] ohci-platform: OHCI generic platform driver [ 2.903884] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.910518] usbcore: registered new interface driver uas [ 2.914611] usbcore: registered new interface driver usb-storage [ 2.920518] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.926770] mousedev: PS/2 mouse device common for all mice [ 2.931499] usbcore: registered new interface driver xpad [ 2.939769] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.942453] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.950265] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.956805] i2c /dev entries driver [ 2.959938] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.965684] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.971240] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.976695] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.981742] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.987250] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.992669] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.005708] device-mapper: uevent: version 1.0.3 [ 3.006116] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.013334] cpuidle: Initializing cpuidle driver [ 3.017282] sdhci: Secure Digital Host Controller Interface driver [ 3.022093] sdhci: Copyright(c) Pierre Ossman [ 3.025925] Synopsys Designware Multimedia Card Interface Driver [ 3.032127] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.038117] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.038933] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.051605] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.073227] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.082928] vdd-1v0: supplied by regulator-dummy [ 3.088503] vdd-1v8-hs: supplied by regulator-dummy [ 3.093428] vdd-1v8-ls: supplied by regulator-dummy [ 3.098295] vdd-1v8-ao: supplied by regulator-dummy [ 3.102360] vddio-ddr-1v1: supplied by regulator-dummy [ 3.106893] vdd-rtc: supplied by regulator-dummy [ 3.108671] spmic-ldo1: supplied by regulator-dummy [ 3.109969] vdd-ao-3v3: supplied by regulator-dummy [ 3.116170] vddio-emmc-3v3: supplied by regulator-dummy [ 3.122574] spmic-ldo4: supplied by regulator-dummy [ 3.123894] vdd-usb-3v3: supplied by regulator-dummy [ 3.130087] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.136392] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.142032] spmic-ldo8: supplied by vdd-1v8-ls [ 3.143615] gpio-510 (gpio_default): hogged as output/high [ 3.145007] gpio-511 (gpio_default): hogged as output/high [ 3.147971] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.283748] max77686-rtc max77620-rtc: registered as rtc0 [ 3.284806] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.285135] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.114593] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.115687] hid: raw HID events driver (C) Jiri Kosina [ 4.116518] usbcore: registered new interface driver usbhid [ 4.116671] usbhid: USB HID core driver [ 4.118757] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.120114] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.921940] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.996364] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.232 ms) ÿá[ 4.204500] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.205090] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.206047] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.206795] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.208492] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.209252] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.209809] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.211245] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.211525] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.214092] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.221340] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.227519] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.232258] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.238813] denver_knobs_init:MTS_VERSION:55637613 [ 4.251813] t19x_cache tegra-cache: probed [ 4.254769] optee: probing for conduit method. [ 4.255661] optee: revision 3.16 (65cc2218) [ 4.256683] optee: dynamic shared memory is enabled [ 4.259460] optee: initialized driver [ 4.266518] nvpmodel: initialized successfully [ 4.267164] tegra_hv: get_hvd: not initialized yet [ 4.271886] user_ivc_mempool: hypervisor not present [ 4.277570] usbcore: registered new interface driver snd-usb-audio [ 4.284230] u32 classifier [ 4.285643] input device check on [ 4.289447] Actions configured [ 4.292770] Initializing XFRM netlink socket [ 4.297686] NET: Registered protocol family 10 [ 4.303829] Segment Routing with IPv6 [ 4.304981] NET: Registered protocol family 17 [ 4.309262] NET: Registered protocol family 15 [ 4.313657] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.327360] Bluetooth: RFCOMM socket layer initialized [ 4.331970] Bluetooth: RFCOMM ver 1.11 [ 4.336102] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.341682] Bluetooth: HIDP socket layer initialized [ 4.347551] 9pnet: Installing 9P2000 support [ 4.351156] Key type dns_resolver registered [ 4.356707] registered taskstats version 1 [ 4.359594] Loading compiled-in X.509 certificates [ 4.372796] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.375617] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.385823] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.387538] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.396311] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.404476] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.522432] tegra194-pcie 14160000.pcie: Link up [ 4.525320] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.525516] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.525729] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.526016] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.526271] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.526728] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.527193] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.539681] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.540162] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.540639] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.542150] pci 0004:01:00.0: supports D1 D2 [ 4.542413] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.553748] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.554138] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.554434] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.554943] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.555183] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.555401] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.556945] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.564365] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.573151] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.583073] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.587726] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.593510] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.600128] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.609413] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.611197] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.619677] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.627814] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.743202] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.743897] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.744120] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.744274] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.744561] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.744816] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.745224] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.745735] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.763745] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.764001] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.765738] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.767330] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.768601] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.769758] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.770758] pci 0005:00:00.0: Removing from iommu group 7 [ 5.771136] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.808023] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.832000] host1x 13e10000.host1x: initialized [ 5.833448] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.834758] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.836198] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.836944] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.838274] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.839205] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.840438] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.841171] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.842222] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.843403] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.853476] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.860151] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.870297] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.877354] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.887522] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.894230] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.904145] falcon 15340000.vic: Adding to iommu group 17 [ 5.919901] falcon 15340000.vic: initialized [ 5.921017] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.926970] falcon 15380000.nvjpg: initialized [ 5.927506] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.937311] falcon 154c0000.nvenc: initialized [ 5.937841] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.947913] falcon 15a80000.nvenc1: initialized [ 5.948497] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.960177] nvdec 15480000.nvdec: initialized [ 5.960685] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.970269] nvdec 15140000.nvdec1: initialized [ 5.970824] tsec 15500000.tsec: Adding to iommu group 18 [ 5.976457] tsec 15500000.tsec: initialized [ 5.976893] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.984210] tsec 15100000.tsecb: initialized [ 5.987958] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.016716] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.029338] gpio-374 (wifi-enable): hogged as output/high [ 6.029640] gpio-431 (camera-control-output-low): hogged as output/low [ 6.029934] gpio-432 (camera-control-output-low): hogged as output/low [ 6.031911] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.034277] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.035086] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.036489] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.040730] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.046774] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.052298] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.060628] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.067701] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.079083] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.084713] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.090579] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.099396] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.108401] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.115843] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.123116] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.129409] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.139053] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.145275] pva 16000000.pva0: Adding to iommu group 22 [ 6.172035] pva 16000000.pva0: initialized [ 6.176998] pva 16800000.pva1: Adding to iommu group 23 [ 6.188014] pva 16800000.pva1: initialized [ 6.192294] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.206097] nvdla 15880000.nvdla0: initialized [ 6.207472] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.216085] nvdla 158c0000.nvdla1: initialized [ 6.220749] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.220860] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.221086] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.221327] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.221889] tegradccommon 15200000.display-hub: dma mapping done [ 6.222126] tegradc 15210000.display: Adding to iommu group 26 [ 6.222421] tegradc 15200000.display: Adding to iommu group 26 [ 6.222976] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.232045] tegradc 15210000.display: disp0 connected to head1->sor [ 6.235558] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.241462] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.247468] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.254797] tegradc 15210000.display: DT parsed successfully [ 6.260313] tegra_cec 3960000.tegra_cec: probed [ 6.265612] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.271515] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.279461] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.286754] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.290853] generic_infoframe_type: 0x87 [ 6.297578] kfuse 3830000.kfuse: initialized [ 6.300934] tegradc 15200000.display: DT parsed successfully [ 6.306225] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.311472] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.317829] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.329888] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.332976] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.340521] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.340545] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.347131] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.355551] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.364431] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.371594] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.373112] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.378512] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.386199] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.391050] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.396515] random: crng init done [ 6.401448] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.410059] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.453721] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.454124] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.456487] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.465082] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.473476] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.480258] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.487566] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.495145] usb usb1: Product: xHCI Host Controller [ 6.499707] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.505977] usb usb1: SerialNumber: 3610000.xhci [ 6.511458] hub 1-0:1.0: USB hub found [ 6.514561] hub 1-0:1.0: 4 ports detected [ 6.519330] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.523937] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.531546] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.539393] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.547403] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.554687] usb usb2: Product: xHCI Host Controller [ 6.559426] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.565561] usb usb2: SerialNumber: 3610000.xhci [ 6.571176] hub 2-0:1.0: USB hub found [ 6.574005] hub 2-0:1.0: 4 ports detected [ 6.616374] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.622734] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.624253] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.624449] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.638390] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.639426] tegra194-cpufreq ccplex: probed with BWMGR [ 6.640705] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.641156] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.641590] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.642860] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.650295] tegra194-vi5 15c10000.vi: initialized [ 6.651977] mmc0: CQHCI version 5.10 [ 6.651996] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.653288] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.657878] generic_infoframe_type: 0x87 [ 6.657934] tegradc 15200000.display: DT parsed successfully [ 6.664341] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.668292] tegradc 15200000.display: Display dc.000000005a1ce913 registered with id=0 [ 6.673808] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.696244] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.703120] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.709691] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.716050] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.722390] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.724100] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.728866] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.730855] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.739144] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.753696] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.761651] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.767408] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.774896] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.782257] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.790353] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.806179] nvethernet 2490000.ethernet: Macsec not supported [ 6.812494] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.813297] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.819211] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.828685] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.840883] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.847736] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.849342] tegradc 15200000.display: probed [ 6.855819] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.867191] tegra-se-nvhost 15810000.se: initialized [ 6.875282] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.876554] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.883122] tegra-se-nvhost 15820000.se: initialized [ 6.889576] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.894012] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.900687] tegra-se-nvhost 15830000.se: initialized [ 6.905883] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.911569] Console: switching to colour frame buffer device 240x67 [ 6.911777] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.917138] tegradc 15200000.display: fb registered [ 6.924068] tegra-se-nvhost 15840000.se: initialized [ 6.928516] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.935078] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.945482] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.946601] tegra_actmon d230000.actmon: in actmon_register()... [ 6.957104] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.957241] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.968852] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.977103] hvc_sysfs: hypervisor is not present [ 6.987619] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.989031] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.996140] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.001123] usb 1-2: Manufacturer: Generic [ 7.006881] ALSA device list: [ 7.008242] No soundcards found. [ 7.008366] hub 1-2:1.0: USB hub found [ 7.016589] hub 1-2:1.0: 4 ports detected [ 7.018269] mmc0: Command Queue Engine enabled [ 7.024266] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.024302] mmc0: periodic cache flush enabled [ 7.034099] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.037698] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.038257] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.045485] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.046395] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.052143] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.056242] Extcon AUX1(HDMI) enable [ 7.056379] tegradc 15210000.display: disp1 connected to head1->sor [ 7.088457] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.095416] tegradc 15210000.display: DT parsed successfully [ 7.101311] tegradc 15210000.display: Display dc.00000000e21724b0 registered with id=1 [ 7.109407] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.117195] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.122653] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.124740] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.135880] tegradc 15210000.display: probed [ 7.141517] tegradc 15210000.display: fb registered [ 7.144215] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.150168] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.154601] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.154611] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.155995] Freeing unused kernel memory: 3968K [ 7.162206] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.162220] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.169209] usb 2-3: Manufacturer: Generic [ 7.180243] hub 2-3:1.0: USB hub found [ 7.199780] tegradc 15210000.display: blank - powerdown [ 7.201625] hub 2-3:1.0: 4 ports detected [ 7.205262] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.205286] Extcon DP: HPD disabled [ 7.205316] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.206511] Run /init as init process ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.231447] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.231453] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.231547] tegradc 15200000.display: blank - powerdown [ 7.266381] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.266400] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.274711] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.274715] Extcon AUX1(HDMI) disable [ 7.298247] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.299198] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.310869] tegradc 15200000.display: unblank [ 7.311935] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.312130] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.318951] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.320884] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.324889] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.324893] Extcon AUX1(HDMI) enable [ 7.331007] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.331014] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.337663] tegradc 15200000.display: sync windows ret = 247 [ 7.374749] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.376227] Extcon HDMI: HPD enabled [ 7.377545] tegradc 15200000.display: hdmi: plugged [ 7.415544] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.417022] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.418445] usb 1-3: Product: Bluetooth Radio [ 7.419825] usb 1-3: Manufacturer: Realtek [ 7.420548] Root device found: mmcblk0p1 [ 7.421131] usb 1-3: SerialNumber: 00e04c000001 [ 7.425836] Found dev node: /dev/mmcblk0p1 [ 7.462088] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.467545] Rootfs mounted over mmcblk0p1 [ 7.497752] Switching from initrd to actual rootfs [ 7.642722] systemd[1]: System time before build time, advancing clock. [ 7.715895] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.720868] systemd[1]: Detected architecture arm64. [ 7.760807] systemd[1]: Set hostname to . [ 7.927384] systemd-sysv-generator[255]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.280365] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.282121] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.287810] systemd[1]: Created slice system-modprobe.slice. [ 8.292711] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.296958] systemd[1]: Created slice User and Session Slice. [ 8.300521] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.304741] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.308336] systemd[1]: Reached target User and Group Name Lookups. [ 8.311529] systemd[1]: Reached target Slices. [ 8.314676] systemd[1]: Reached target Swap. [ 8.318715] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.322522] systemd[1]: Listening on Syslog Socket. [ 8.327550] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.332196] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.336453] systemd[1]: Listening on Journal Audit Socket. [ 8.340037] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.343783] systemd[1]: Listening on Journal Socket. [ 8.347453] systemd[1]: Listening on udev Control Socket. [ 8.350948] systemd[1]: Listening on udev Kernel Socket. [ 8.359421] systemd[1]: Mounting Huge Pages File System... [ 8.367692] systemd[1]: Mounting POSIX Message Queue File System... [ 8.375903] systemd[1]: Mounting RPC Pipe File System... [ 8.384439] systemd[1]: Mounting Kernel Debug File System... [ 8.392851] systemd[1]: Mounting Kernel Trace File System... [ 8.402731] systemd[1]: Starting Journal Service... [ 8.411517] systemd[1]: Starting Set the console keyboard layout... [ 8.419782] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.423279] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.429476] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.437723] systemd[1]: Started Nameserver information manager. [ 8.442400] systemd[1]: Reached target Network (Pre). [ 8.450279] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.452174] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.459183] systemd[1]: Starting Load Kernel Modules... [ 8.466831] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.475618] systemd[1]: Starting udev Coldplug all Devices... [ 8.485718] systemd[1]: Mounted Huge Pages File System. [ 8.489540] systemd[1]: Mounted POSIX Message Queue File System. [ 8.493198] systemd[1]: Mounted RPC Pipe File System. [ 8.496169] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.498237] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.500298] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.500637] systemd[1]: Mounted Kernel Debug File System. [ 8.501858] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.506162] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.506166] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.506366] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.507852] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.512176] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.512190] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.518196] systemd[1]: Mounted Kernel Trace File System. [ 8.527628] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.535660] systemd[1]: nvfb-udev.service: Succeeded. [ 8.539450] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.550719] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.563426] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.565203] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.572918] systemd[1]: Starting Load/Save Random Seed... [ 8.581326] systemd[1]: Starting Create System Users... [ 8.609529] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.609529] [ 8.633629] systemd[1]: Finished Load/Save Random Seed. [ 8.653486] systemd[1]: Finished Load Kernel Modules. [ 8.658743] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.664950] systemd[1]: Mounting Kernel Configuration File System... [ 8.673952] systemd[1]: Started OP-TEE Client Supplicant. [ 8.682537] systemd[1]: Starting Apply Kernel Variables... [ 8.693332] systemd[1]: Finished Set the console keyboard layout. [ 8.700652] systemd[1]: Finished Create System Users. [ 8.705090] systemd[1]: Mounted Kernel Configuration File System. [ 10.095238] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.100430] imx219 9-0010: board setup failed [ 10.100558] imx219: probe of 9-0010 failed with error -121 [ 10.111513] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.116702] imx219 10-0010: board setup failed [ 10.120702] imx219: probe of 10-0010 failed with error -121 [ 10.213933] hot-surface-alert cooling state: 0 -> 1 [ 10.956264] using random self ethernet address [ 10.959499] using random host ethernet address [ 11.669593] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.671527] Creating 1 MTD partitions on "spi6.0": [ 11.673179] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.443407] using random self ethernet address [ 12.443413] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.828491] nvidia: loading out-of-tree module taints kernel. [ 58.180367] watchdog: watchdog0: watchdog did not stop! [ 58.655681] Trying to unregister non-registered hwtime source [ 61.716408] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.717917] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.311] I> sdmmc DDR50 mode [0001.329] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.346] W> Cannot find any partition table for 00000003 [0001.347] > PARTITION_MANAGER: Failed to publish partition. [0001.363] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.364] I> Active Boot chain : 0 [0002.035] I> Relocating BR-BCT [0002.037] > DEVICE_PROD: device prod is not initialized. [0002.342] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.343] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.344] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.344] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.345] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.345] I> dram_block larger than 80000000 [0002.348] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.359] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.362] I> found decompressor handler: lz4 [0002.591] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.592] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.211] I> Welcome to NVDisp-Init [0003.212] I> NVDisp-Init version: t194-f9ecfedc [0003.212] I> CPU-BL Params @ 0xca020000 [0003.212] I> 0) Base:0x00000000 Size:0x00000000 [0003.213] I> 1) Base:0xc8300000 Size:0x00100000 [0003.213] I> 2) Base:0xc9800000 Size:0x00200000 [0003.213] I> 3) Base:0xc8600000 Size:0x00200000 [0003.216] I> 4) Base:0xc8200000 Size:0x00100000 [0003.220] I> 5) Base:0xc8100000 Size:0x00100000 [0003.225] I> 6) Base:0xc9400000 Size:0x00400000 [0003.229] I> 7) Base:0xc9000000 Size:0x00400000 [0003.234] I> 8) Base:0xc8000000 Size:0x00100000 [0003.238] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.242] I> 10) Base:0xca800000 Size:0x00800000 [0003.247] I> 11) Base:0x40000000 Size:0x00040000 [0003.251] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.256] I> 13) Base:0x40046000 Size:0x00002000 [0003.260] I> 14) Base:0x40048000 Size:0x00002000 [0003.265] I> 15) Base:0xaf000000 Size:0x00004000 [0003.269] I> 16) Base:0x4004a000 Size:0x00002000 [0003.274] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.278] I> 18) Base:0x4004c000 Size:0x00002000 [0003.283] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.287] I> 20) Base:0x4004e000 Size:0x00002000 [0003.292] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.296] I> 22) Base:0x00000000 Size:0x00000000 [0003.300] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.305] I> 24) Base:0xcc000000 Size:0x02000000 [0003.309] I> 25) Base:0x40050000 Size:0x00002000 [0003.314] I> 26) Base:0x40040000 Size:0x00006000 [0003.318] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.323] I> 28) Base:0xc8400000 Size:0x00200000 [0003.327] I> 29) Base:0xc8800000 Size:0x00400000 [0003.332] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.336] I> 31) Base:0x00000000 Size:0x00000000 [0003.341] I> 32) Base:0xf8000000 Size:0x08000000 [0003.345] I> 33) Base:0xce000000 Size:0x2a000000 [0003.350] I> 34) Base:0xcb000000 Size:0x01000000 [0003.354] I> 35) Base:0xae000000 Size:0x01000000 [0003.358] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.363] I> 37) Base:0xca000000 Size:0x00800000 [0003.367] I> 38) Base:0x80000000 Size:0x20000000 [0003.372] I> 39) Base:0xb0000000 Size:0x08000000 [0003.376] I> 40) Base:0x00000000 Size:0x00000000 [0003.381] I> 41) Base:0x00000000 Size:0x00000000 [0003.385] I> 42) Base:0x00000000 Size:0x00000000 [0003.390] I> 43) Base:0x00000000 Size:0x00000000 [0003.394] I> 44) Base:0x00000000 Size:0x00000000 [0003.399] I> 45) Base:0x00000000 Size:0x00000000 [0003.403] GIC-SPI Target CPU: 0 [0003.406] Interrupts Init done [0003.409] calling constructors [0003.412] initializing heap [0003.414] I> Heap: [0xa0960000 ... 0xadf00000] [0003.419] initializing threads [0003.422] initializing timers [0003.424] creating bootstrap completion thread [0003.429] top of bootstrap2() [0003.432] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.436] initializing platform [0003.439] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.445] W> device prod register failed [0003.448] I> Bl_dtb @0xadf00000 [0003.451] I> gpio framework initialized [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.474] I> fixed regulator driver initialized [0003.490] I> register 'maxim' power off handle [0003.493] I> virtual i2c enabled [0003.493] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.494] I> Boot-device: QSPI [0003.496] I> Boot_device: QSPI_FLASH instance: 0 [0003.500] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.511] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.518] I> QSPI source rate = 204000 Khz [0003.521] I> Requested rate for QSPI clock = 34000 Khz [0003.526] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.531] I> tx_clk_tap_delay : 0 [0003.534] I> rx_clk_tap_delay : 16 [0003.537] I> QSPI Flash Size = 32 MB [0003.545] I> Qspi initialized successfully [0003.545] I> qspi flash-0 params source = boot args [0003.550] W> No board IDs available [0003.552] E> Failed to get board id info! [0003.558] I> sdmmc-3 params source = safe params [0003.565] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.567] W> Cannot find any partition table for 00000003 [0003.571] E> Failed to publish 00000003 [0003.576] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> hdmi cable connected [0003.609] W> set volts not configured for 'vdd-1v0' [0003.615] W> set volts not configured for 'vdd-1v8-hs' [0003.615] I> retrieved tmds range from prod_list_hdmi_soc [0003.622] E> invalid display type [0003.623] E> cannot find any other nvdisp nodes [0003.640] I> edid read success [0003.652] I> edid read success [0003.652] I> width = 640, height = 480, frequency = 25174825 [0003.653] I> width = 1920, height = 1080, frequency = 148500000 [0003.653] I> width = 1280, height = 768, frequency = 79500000 [0003.654] I> width = 1360, height = 768, frequency = 85500000 [0003.654] I> width = 720, height = 480, frequency = 26973026 [0003.658] I> width = 720, height = 576, frequency = 26973026 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1280, height = 720, frequency = 74175824 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.686] I> width = 720, height = 480, frequency = 26973026 [0003.692] I> width = 720, height = 576, frequency = 26973026 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 4096, height = 2160, frequency = 296703296 [0003.726] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.737] I> hdmi_enable, starting HDMI initialisation [0003.742] I> hdmi_enable, HDMI initialisation complete [0003.752] initializing target [0003.752] calling apps_init() [0003.753] starting app kernel_boot_app [0003.754] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000654] Console: colour dummy device 80x25 [ 0.002038] printk: console [tty0] enabled [ 0.002098] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002132] pid_max: default: 32768 minimum: 301 [ 0.002302] LSM: Security Framework initializing [ 0.002362] Yama: becoming mindful. [ 0.002403] SELinux: Initializing. [ 0.002547] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002583] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005663] rcu: Hierarchical SRCU implementation. [ 0.005951] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006787] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006874] DTB Build time: Aug 10 2022 20:31:49 [ 0.009572] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009817] Remapping and enabling EFI services. [ 0.011818] smp: Bringing up secondary CPUs ... [ 0.041020] Detected PIPT I-cache on CPU1 [ 0.041119] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072957] Detected PIPT I-cache on CPU2 [ 0.073108] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102638] Detected PIPT I-cache on CPU3 [ 0.102775] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132465] Detected PIPT I-cache on CPU4 [ 0.132633] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162369] Detected PIPT I-cache on CPU5 [ 0.162526] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162916] smp: Brought up 1 node, 6 CPUs [ 0.163076] SMP: Total of 6 processors activated. [ 0.163162] CPU features: detected: Privileged Access Never [ 0.163185] CPU features: detected: LSE atomic instructions [ 0.163199] CPU features: detected: User Access Override [ 0.163212] CPU features: detected: 32-bit EL0 Support [ 0.163225] CPU features: detected: RAS Extension Support [ 0.163237] CPU features: detected: CRC32 instructions [ 0.163250] CPU features: detected: 32-bit EL1 Support [ 0.230856] CPU: All CPU(s) started at EL2 [ 0.237493] devtmpfs: initialized [ 0.284641] Registered cp15_barrier emulation handler [ 0.284768] Registered setend emulation handler [ 0.284787] KASLR enabled [ 0.285064] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285091] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286394] pinctrl core: initialized pinctrl subsystem [ 0.287342] SMBIOS 3.0.0 present. [ 0.287370] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288023] NET: Registered protocol family 16 [ 0.290003] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.290523] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291223] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291279] audit: initializing netlink subsys (disabled) [ 0.291494] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.291847] thermal_sys: Registered thermal governor 'step_wise' [ 0.291853] thermal_sys: Registered thermal governor 'power_allocator' [ 0.291866] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.293945] cpuidle: using governor menu [ 0.294306] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.294696] ASID allocator initialised with 32768 entries [ 0.294932] Serial: AMBA PL011 UART driver [ 0.298107] Tegra reboot handler registered. [ 0.368190] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.368410] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.368606] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.368661] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.368776] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.368827] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.368961] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.369033] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.369143] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.369194] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.371525] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.371564] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.371613] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.371674] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.371733] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.371779] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.371809] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.371842] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.371873] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.371901] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.371930] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.371958] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.371987] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.372015] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.372044] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.372087] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.372116] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.372277] mc-err: mcerr ops are set to t19x [ 0.383554] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.383574] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.383586] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.383597] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.389824] ACPI: Interpreter disabled. [ 0.390950] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.392078] iommu: Default domain type: Translated [ 0.392140] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.392482] SCSI subsystem initialized [ 0.392618] usbcore: registered new interface driver usbfs [ 0.392654] usbcore: registered new interface driver hub [ 0.392684] usbcore: registered new device driver usb [ 0.393032] mc: Linux media interface: v0.10 [ 0.393056] videodev: Linux video capture interface: v2.00 [ 0.393339] pps_core: LinuxPPS API ver. 1 registered [ 0.393350] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.393368] PTP clock support registered [ 0.393560] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.393878] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.393966] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.394507] Registered efivars operations [ 0.400506] FPGA manager framework [ 0.400619] Advanced Linux Sound Architecture Driver Initialized. [ 0.401196] Bluetooth: Core ver 2.22 [ 0.401235] NET: Registered protocol family 31 [ 0.401266] Bluetooth: HCI device and connection manager initialized [ 0.401283] Bluetooth: HCI socket layer initialized [ 0.401300] Bluetooth: L2CAP socket layer initialized [ 0.401342] Bluetooth: SCO socket layer initialized [ 0.402775] camchar: rtcpu character device driver loaded [ 0.403476] clocksource: Switched to clocksource arch_sys_counter [ 0.696898] VFS: Disk quotas dquot_6.6.0 [ 0.696967] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.697363] pnp: PnP ACPI: disabled [ 0.707412] la/ptsa driver initialized. [ 0.707624] NET: Registered protocol family 2 [ 0.707828] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.712513] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.712579] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.712889] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.713328] TCP: Hash tables configured (established 65536 bind 65536) [ 0.713475] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.713570] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.713748] NET: Registered protocol family 1 [ 0.714662] RPC: Registered named UNIX socket transport module. [ 0.714694] RPC: Registered udp transport module. [ 0.714710] RPC: Registered tcp transport module. [ 0.714726] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.714763] PCI: CLS 0 bytes, default 64 [ 0.715111] Trying to unpack rootfs image as initramfs... [ 0.983762] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.986913] Freeing initrd memory: 8196K [ 0.991680] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.991713] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.991771] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.992210] kvm [1]: IPA Size Limit: 40 bits [ 0.992803] kvm [1]: vgic interrupt IRQ9 [ 0.993353] kvm [1]: VHE mode initialized successfully [ 0.995079] Initialise system trusted keyrings [ 0.995529] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.000936] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.001831] NFS: Registering the id_resolver key type [ 1.001868] Key type id_resolver registered [ 1.001883] Key type id_legacy registered [ 1.001967] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.001991] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.002031] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.012161] NET: Registered protocol family 38 [ 1.012215] Key type asymmetric registered [ 1.012230] Asymmetric key parser 'x509' registered [ 1.012284] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.012566] io scheduler mq-deadline registered [ 1.012584] io scheduler kyber registered [ 1.019066] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.022466] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.022549] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.022624] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.022693] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.022760] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.028642] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.028649] scrncapt: init (heads:4 wins:6 planes:4) [ 1.029736] EINJ: ACPI disabled. [ 1.033274] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.033299] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.033314] tegra-pmc: ### PMC reset level: L1 [ 1.033327] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.033375] tegra-pmc: PMC Prod config success [ 1.038799] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.057983] random: fast init done [ 1.067415] printk: console [ttyTCU0] enabled [ 2.596949] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.601192] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.605708] arm-smmu 10000000.iommu: stage 1 translation [ 2.610951] arm-smmu 10000000.iommu: stage 2 translation [ 2.616721] arm-smmu 10000000.iommu: nested translation [ 2.622077] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.629241] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.640962] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.642340] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.648924] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.656774] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.661706] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.666430] arm-smmu 12000000.iommu: stage 1 translation [ 2.672201] arm-smmu 12000000.iommu: stage 2 translation [ 2.677365] arm-smmu 12000000.iommu: nested translation [ 2.683048] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.690229] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.701599] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.703327] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.709659] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.717512] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.726950] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.730326] tegra_profiler: auth: init [ 2.734290] THERMAL EST: found 3 subdevs [ 2.738005] THERMAL EST num_resources: 0 [ 2.741849] [THERMAL EST subdev 0] [ 2.744914] [THERMAL EST subdev 1] [ 2.748583] [THERMAL EST subdev 2] [ 2.751571] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.758270] THERMAL EST: thz register success. [ 2.762529] THERMAL EST: end of probe, return err: 0 [ 2.767596] nvsciipc: loaded module [ 2.774451] tun: Universal TUN/TAP device driver, 1.6 [ 2.777188] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.783338] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.788972] e1000e: Intel(R) PRO/1000 Network Driver [ 2.794087] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.800174] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.805457] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.811631] PPP generic driver version 2.4.2 [ 2.815922] PPP BSD Compression module registered [ 2.820196] PPP Deflate Compression module registered [ 2.825422] PPP MPPE Compression module registered [ 2.830713] usbcore: registered new interface driver r8152 [ 2.835951] usbcore: registered new interface driver asix [ 2.841277] usbcore: registered new interface driver ax88179_178a [ 2.847658] usbcore: registered new interface driver cdc_ether [ 2.853626] usbcore: registered new interface driver net1080 [ 2.859213] usbcore: registered new interface driver cdc_subset [ 2.865267] usbcore: registered new interface driver zaurus [ 2.870943] usbcore: registered new interface driver cdc_ncm [ 2.876624] usbcore: registered new interface driver aqc111 [ 2.882001] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.888368] ohci-pci: OHCI PCI platform driver [ 2.892382] ohci-platform: OHCI generic platform driver [ 2.898280] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.904841] usbcore: registered new interface driver uas [ 2.908946] usbcore: registered new interface driver usb-storage [ 2.914840] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.921099] mousedev: PS/2 mouse device common for all mice [ 2.926093] usbcore: registered new interface driver xpad [ 2.934146] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.936586] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.944628] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.950932] i2c /dev entries driver [ 2.954282] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.960099] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.965828] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.970761] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.976348] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.981687] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.987006] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.000840] device-mapper: uevent: version 1.0.3 [ 3.001286] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.007821] cpuidle: Initializing cpuidle driver [ 3.011736] sdhci: Secure Digital Host Controller Interface driver [ 3.016167] sdhci: Copyright(c) Pierre Ossman [ 3.020530] Synopsys Designware Multimedia Card Interface Driver [ 3.026459] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.032467] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.033282] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.045868] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.067244] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.077091] vdd-1v0: supplied by regulator-dummy [ 3.082528] vdd-1v8-hs: supplied by regulator-dummy [ 3.087433] vdd-1v8-ls: supplied by regulator-dummy [ 3.092371] vdd-1v8-ao: supplied by regulator-dummy [ 3.096337] vddio-ddr-1v1: supplied by regulator-dummy [ 3.100815] vdd-rtc: supplied by regulator-dummy [ 3.102581] spmic-ldo1: supplied by regulator-dummy [ 3.103911] vdd-ao-3v3: supplied by regulator-dummy [ 3.110227] vddio-emmc-3v3: supplied by regulator-dummy [ 3.116509] spmic-ldo4: supplied by regulator-dummy [ 3.117794] vdd-usb-3v3: supplied by regulator-dummy [ 3.124075] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.130363] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.135968] spmic-ldo8: supplied by vdd-1v8-ls [ 3.137476] gpio-510 (gpio_default): hogged as output/high [ 3.138860] gpio-511 (gpio_default): hogged as output/high [ 3.141733] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.278538] max77686-rtc max77620-rtc: registered as rtc0 [ 3.279948] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.280313] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.125418] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.126593] hid: raw HID events driver (C) Jiri Kosina [ 4.127415] usbcore: registered new interface driver usbhid [ 4.127605] usbhid: USB HID core driver [ 4.129668] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.130814] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.272315] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.347148] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 75.644 ms) ÿá[ 4.215129] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.215780] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.216834] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.217651] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.219461] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.220136] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.220729] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.222002] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.222307] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.224235] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.231844] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.238308] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.243230] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.249331] denver_knobs_init:MTS_VERSION:55637613 [ 4.262263] t19x_cache tegra-cache: probed [ 4.266324] optee: probing for conduit method. [ 4.267154] optee: revision 3.16 (65cc2218) [ 4.268152] optee: dynamic shared memory is enabled [ 4.270345] optee: initialized driver [ 4.277153] nvpmodel: initialized successfully [ 4.277915] tegra_hv: get_hvd: not initialized yet [ 4.282735] user_ivc_mempool: hypervisor not present [ 4.288532] usbcore: registered new interface driver snd-usb-audio [ 4.295153] u32 classifier [ 4.296491] input device check on [ 4.300214] Actions configured [ 4.303701] Initializing XFRM netlink socket [ 4.308364] NET: Registered protocol family 10 [ 4.315196] Segment Routing with IPv6 [ 4.315890] NET: Registered protocol family 17 [ 4.320332] NET: Registered protocol family 15 [ 4.324617] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.338119] Bluetooth: RFCOMM socket layer initialized [ 4.343018] Bluetooth: RFCOMM ver 1.11 [ 4.346652] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.352824] Bluetooth: HIDP socket layer initialized [ 4.358409] 9pnet: Installing 9P2000 support [ 4.361955] Key type dns_resolver registered [ 4.367702] registered taskstats version 1 [ 4.370445] Loading compiled-in X.509 certificates [ 4.383200] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.386453] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.396192] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.398559] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.406887] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.415505] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.531623] tegra194-pcie 14160000.pcie: Link up [ 4.534682] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.534959] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.535215] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.535547] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.535732] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.536305] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.536782] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.547988] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.548729] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.549230] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.550741] pci 0004:01:00.0: supports D1 D2 [ 4.550964] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.561297] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.561729] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.562015] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.562480] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.562821] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.562992] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.566498] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.573883] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.582084] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.592393] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.597040] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.602704] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.609635] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.618453] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.620341] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.628505] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.637231] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.752429] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.752968] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.753302] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.753545] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.753935] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.754167] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.754524] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.755009] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.774294] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.774634] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.776546] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.777692] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.779027] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.780738] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.781773] pci 0005:00:00.0: Removing from iommu group 7 [ 5.782169] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.819175] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.843980] host1x 13e10000.host1x: initialized [ 5.845630] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.846569] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.847737] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.848439] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.849560] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.850325] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.851292] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.851942] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.852845] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.853472] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.862418] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.869488] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.879303] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.886519] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.896227] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.903680] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.913415] falcon 15340000.vic: Adding to iommu group 17 [ 5.928276] falcon 15340000.vic: initialized [ 5.929373] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.935088] falcon 15380000.nvjpg: initialized [ 5.935884] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.946571] falcon 154c0000.nvenc: initialized [ 5.947324] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.956514] falcon 15a80000.nvenc1: initialized [ 5.957180] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.968169] nvdec 15480000.nvdec: initialized [ 5.968815] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.979696] nvdec 15140000.nvdec1: initialized [ 5.980206] tsec 15500000.tsec: Adding to iommu group 18 [ 5.985743] tsec 15500000.tsec: initialized [ 5.986235] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.993874] tsec 15100000.tsecb: initialized [ 5.997811] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.026061] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.038408] gpio-374 (wifi-enable): hogged as output/high [ 6.038686] gpio-431 (camera-control-output-low): hogged as output/low [ 6.039072] gpio-432 (camera-control-output-low): hogged as output/low [ 6.040765] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.042754] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.043256] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.044758] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.049740] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.056161] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.061234] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.069869] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.076882] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.088913] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.093898] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.099729] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.108555] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.117580] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.125115] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.132606] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.138644] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.148538] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.154504] pva 16000000.pva0: Adding to iommu group 22 [ 6.181948] pva 16000000.pva0: initialized [ 6.186841] pva 16800000.pva1: Adding to iommu group 23 [ 6.198993] pva 16800000.pva1: initialized [ 6.204188] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.224928] nvdla 15880000.nvdla0: initialized [ 6.226331] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.235985] nvdla 158c0000.nvdla1: initialized [ 6.239973] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.240314] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.240652] tegradccommon 15200000.display-hub: dma mapping done [ 6.240900] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.240991] tegradc 15200000.display: Adding to iommu group 26 [ 6.241406] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.243081] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.244121] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.244327] tegra_cec 3960000.tegra_cec: probed [ 6.248695] tegradc 15210000.display: Adding to iommu group 26 [ 6.249075] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.249505] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.249814] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.251879] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.252214] kfuse 3830000.kfuse: initialized [ 6.252713] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.252719] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.253327] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.254101] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.255532] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.261762] generic_infoframe_type: 0x87 [ 6.267629] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.272782] tegradc 15200000.display: DT parsed successfully [ 6.280403] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.284176] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.291070] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.301558] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.315718] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.317497] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.321089] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.329760] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.335587] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.342961] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.350660] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.358526] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.359831] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.366917] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.380618] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.386119] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.390964] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.398200] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.408250] tegradc 15210000.display: disp0 connected to head1->sor [ 6.411717] usb usb1: Product: xHCI Host Controller [ 6.411727] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.411735] usb usb1: SerialNumber: 3610000.xhci [ 6.413308] hub 1-0:1.0: USB hub found [ 6.421593] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.427321] hub 1-0:1.0: 4 ports detected [ 6.438134] tegradc 15210000.display: DT parsed successfully [ 6.444609] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.450973] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.459022] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.537492] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.545001] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.552860] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.560011] usb usb2: Product: xHCI Host Controller [ 6.564870] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.570999] usb usb2: SerialNumber: 3610000.xhci [ 6.576810] hub 2-0:1.0: USB hub found [ 6.579566] hub 2-0:1.0: 4 ports detected [ 6.619675] random: crng init done [ 6.621445] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.627666] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.629083] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.629322] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.643051] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.644181] tegra194-cpufreq ccplex: probed with BWMGR [ 6.645428] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.645900] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.646387] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.647519] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.656782] mmc0: CQHCI version 5.10 [ 6.657620] tegra194-vi5 15c10000.vi: initialized [ 6.661723] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.664561] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.667324] generic_infoframe_type: 0x87 [ 6.673624] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.677518] tegradc 15200000.display: DT parsed successfully [ 6.685592] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.685600] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.685625] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.690990] tegradc 15200000.display: Display dc.00000000e957822e registered with id=0 [ 6.697408] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.726418] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.733592] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.735544] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.741510] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.746420] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.748183] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.770487] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.770493] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.770502] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.778884] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.783980] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.808632] nvethernet 2490000.ethernet: Macsec not supported [ 6.814764] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.815790] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.821505] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.830562] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.839262] tegradc 15200000.display: probed [ 6.843385] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.855091] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.855592] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.862979] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.876121] tegra-se-nvhost 15810000.se: initialized [ 6.884078] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.886041] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.892636] tegra-se-nvhost 15820000.se: initialized [ 6.898298] Console: switching to colour frame buffer device 240x67 [ 6.898610] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.902950] tegradc 15200000.display: fb registered [ 6.903016] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.909483] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.927924] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.928293] tegra-se-nvhost 15830000.se: initialized [ 6.937761] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.937982] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.949322] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.956463] tegra-se-nvhost 15840000.se: initialized [ 6.959779] mmc0: Command Queue Engine enabled [ 6.961386] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.964345] mmc0: periodic cache flush enabled [ 6.964361] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.964831] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.971945] tegra_actmon d230000.actmon: in actmon_register()... [ 6.975025] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.981601] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.005651] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.013422] hvc_sysfs: hypervisor is not present [ 7.014366] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.014851] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.043162] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.043423] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.043959] ALSA device list: [ 7.049580] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.049584] usb 1-2: Manufacturer: Generic [ 7.061560] No soundcards found. [ 7.065401] hub 1-2:1.0: USB hub found [ 7.070168] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.070319] hub 1-2:1.0: 4 ports detected [ 7.076963] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.089435] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.095867] Extcon AUX1(HDMI) enable [ 7.099918] tegradc 15210000.display: disp1 connected to head1->sor [ 7.106260] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.113351] tegradc 15210000.display: DT parsed successfully [ 7.118900] tegradc 15210000.display: Display dc.00000000b55a9fc9 registered with id=1 [ 7.126898] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.132954] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.146005] tegradc 15210000.display: probed [ 7.146362] tegradc 15210000.display: fb registered [ 7.151633] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.155269] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.157434] Freeing unused kernel memory: 3968K [ 7.163144] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.173230] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.179590] Run /init as init process [ 7.184556] tegradc 15210000.display: blank - powerdown [ 7.189679] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.189703] Extcon DP: HPD disabled [ 7.189716] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.208214] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.214071] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.235184] tegradc 15200000.display: blank - powerdown [ 7.235521] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.235528] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.235532] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.235535] usb 2-3: Manufacturer: Generic [ 7.246428] hub 2-3:1.0: USB hub found [ 7.248346] hub 2-3:1.0: 4 ports detected [ 7.248976] Root device found: mmcblk0p1 [ 7.251005] Found dev node: /dev/mmcblk0p1 [ 7.267508] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.281484] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.281489] Extcon AUX1(HDMI) disable [ 7.286345] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.290291] Rootfs mounted over mmcblk0p1 [ 7.304799] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.305699] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.317937] tegradc 15200000.display: unblank [ 7.319374] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.319739] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.326199] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.328137] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.328971] Switching from initrd to actual rootfs [ 7.332063] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.332068] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.332244] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.332250] Extcon AUX1(HDMI) enable [ 7.344892] tegradc 15200000.display: sync windows ret = 247 [ 7.355529] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.415299] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.422303] Extcon HDMI: HPD enabled [ 7.426216] tegradc 15200000.display: hdmi: plugged [ 7.469918] systemd[1]: System time before build time, advancing clock. [ 7.542164] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.547097] systemd[1]: Detected architecture arm64. [ 7.568791] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.570344] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.571843] usb 1-3: Product: Bluetooth Radio [ 7.573241] usb 1-3: Manufacturer: Realtek [ 7.574620] usb 1-3: SerialNumber: 00e04c000001 [ 7.589921] systemd[1]: Set hostname to . [ 7.747287] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.097789] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.099523] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.105009] systemd[1]: Created slice system-modprobe.slice. [ 8.109593] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.113627] systemd[1]: Created slice User and Session Slice. [ 8.117001] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.121186] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.124585] systemd[1]: Reached target User and Group Name Lookups. [ 8.127735] systemd[1]: Reached target Slices. [ 8.130850] systemd[1]: Reached target Swap. [ 8.134765] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.138419] systemd[1]: Listening on Syslog Socket. [ 8.141987] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.145355] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.149543] systemd[1]: Listening on Journal Audit Socket. [ 8.153228] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.157018] systemd[1]: Listening on Journal Socket. [ 8.160686] systemd[1]: Listening on udev Control Socket. [ 8.167248] systemd[1]: Listening on udev Kernel Socket. [ 8.175342] systemd[1]: Mounting Huge Pages File System... [ 8.183985] systemd[1]: Mounting POSIX Message Queue File System... [ 8.191868] systemd[1]: Mounting RPC Pipe File System... [ 8.200529] systemd[1]: Mounting Kernel Debug File System... [ 8.208854] systemd[1]: Mounting Kernel Trace File System... [ 8.218713] systemd[1]: Starting Journal Service... [ 8.227781] systemd[1]: Starting Set the console keyboard layout... [ 8.236181] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.239792] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.246609] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.254686] systemd[1]: Started Nameserver information manager. [ 8.258873] systemd[1]: Reached target Network (Pre). [ 8.265431] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.267341] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.275141] systemd[1]: Starting Load Kernel Modules... [ 8.282950] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.292073] systemd[1]: Starting udev Coldplug all Devices... [ 8.302413] systemd[1]: Mounted Huge Pages File System. [ 8.307662] systemd[1]: Mounted POSIX Message Queue File System. [ 8.311015] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.317780] systemd[1]: Mounted RPC Pipe File System. [ 8.320744] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.321173] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.324081] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.324093] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.324097] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.324334] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.325783] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.331772] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.332536] systemd[1]: Mounted Kernel Debug File System. [ 8.333288] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.338547] systemd[1]: Mounted Kernel Trace File System. [ 8.346103] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.353020] systemd[1]: nvfb-udev.service: Succeeded. [ 8.357235] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.369855] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.374841] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.377049] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.390091] systemd[1]: Starting Load/Save Random Seed... [ 8.399305] systemd[1]: Starting Create System Users... [ 8.446510] systemd[1]: Finished Load/Save Random Seed. [ 8.450631] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.450631] [ 8.459319] systemd[1]: Finished Create System Users. [ 8.467651] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.478908] systemd[1]: Finished Set the console keyboard layout. [ 8.487934] systemd[1]: Finished Load Kernel Modules. [ 8.492771] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.499224] systemd[1]: Mounting Kernel Configuration File System... [ 8.508808] systemd[1]: Started OP-TEE Client Supplicant. [ 8.517317] systemd[1]: Starting Apply Kernel Variables... [ 8.530266] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.534740] systemd[1]: Mounted Kernel Configuration File System. [ 8.538509] systemd[1]: Reached target Local File Systems (Pre). [ 8.541852] systemd[1]: Reached target Local File Systems. [ 8.545144] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 8.550994] systemd[1]: Starting Enable support for additional executable binary formats... [ 9.978323] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.997796] imx219 9-0010: board setup failed [ 10.003830] imx219: probe of 9-0010 failed with error -121 [ 10.017283] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.027343] imx219 10-0010: board setup failed [ 10.028759] imx219: probe of 10-0010 failed with error -121 [ 10.048628] hot-surface-alert cooling state: 0 -> 1 [ 10.887826] using random self ethernet address [ 10.895816] using random host ethernet address [ 11.419012] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.419019] Creating 1 MTD partitions on "spi6.0": [ 11.419027] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.084758] using random self ethernet address [ 12.086354] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.816307] nvidia: loading out-of-tree module taints kernel. [ 59.504951] watchdog: watchdog0: watchdog did not stop! [ 60.018759] Trying to unregister non-registered hwtime source [ 63.078412] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.080173] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.420] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.609] W> set volts not configured for 'vdd-1v0' [0003.614] W> set volts not configured for 'vdd-1v8-hs' [0003.615] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.622] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.650] I> edid read success [0003.651] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.652] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.750] initializing target [0003.751] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000638] Console: colour dummy device 80x25 [ 0.002055] printk: console [tty0] enabled [ 0.002129] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002165] pid_max: default: 32768 minimum: 301 [ 0.002388] LSM: Security Framework initializing [ 0.002460] Yama: becoming mindful. [ 0.002516] SELinux: Initializing. [ 0.002691] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002728] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005748] rcu: Hierarchical SRCU implementation. [ 0.005996] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006834] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006888] DTB Build time: Aug 10 2022 20:31:49 [ 0.009567] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009811] Remapping and enabling EFI services. [ 0.012108] smp: Bringing up secondary CPUs ... [ 0.041256] Detected PIPT I-cache on CPU1 [ 0.041375] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073048] Detected PIPT I-cache on CPU2 [ 0.073209] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102774] Detected PIPT I-cache on CPU3 [ 0.102916] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132635] Detected PIPT I-cache on CPU4 [ 0.132736] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162491] Detected PIPT I-cache on CPU5 [ 0.162650] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163031] smp: Brought up 1 node, 6 CPUs [ 0.163158] SMP: Total of 6 processors activated. [ 0.163238] CPU features: detected: Privileged Access Never [ 0.163262] CPU features: detected: LSE atomic instructions [ 0.163275] CPU features: detected: User Access Override [ 0.163289] CPU features: detected: 32-bit EL0 Support [ 0.163302] CPU features: detected: RAS Extension Support [ 0.163315] CPU features: detected: CRC32 instructions [ 0.163328] CPU features: detected: 32-bit EL1 Support [ 0.234703] CPU: All CPU(s) started at EL2 [ 0.241006] devtmpfs: initialized [ 0.289359] Registered cp15_barrier emulation handler [ 0.289500] Registered setend emulation handler [ 0.289520] KASLR enabled [ 0.289815] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289837] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291264] pinctrl core: initialized pinctrl subsystem [ 0.292194] SMBIOS 3.0.0 present. [ 0.292222] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292791] NET: Registered protocol family 16 [ 0.294681] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295182] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295911] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295963] audit: initializing netlink subsys (disabled) [ 0.296182] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296589] thermal_sys: Registered thermal governor 'step_wise' [ 0.296595] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296608] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298732] cpuidle: using governor menu [ 0.298960] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299336] ASID allocator initialised with 32768 entries [ 0.299567] Serial: AMBA PL011 UART driver [ 0.302700] Tegra reboot handler registered. [ 0.378097] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.378232] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.378453] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.378502] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.378679] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.378747] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.378869] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.378915] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.379040] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.379102] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.381428] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.381465] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.381495] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.381523] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.381555] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.381582] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.381622] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.381654] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.381681] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.381708] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.381733] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.381758] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.381782] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.381815] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.381841] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.381871] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.381896] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.382007] mc-err: mcerr ops are set to t19x [ 0.395053] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.395092] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.395104] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.395116] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.401550] ACPI: Interpreter disabled. [ 0.403005] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.404406] iommu: Default domain type: Translated [ 0.404466] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.404812] SCSI subsystem initialized [ 0.404958] usbcore: registered new interface driver usbfs [ 0.404998] usbcore: registered new interface driver hub [ 0.405031] usbcore: registered new device driver usb [ 0.405463] mc: Linux media interface: v0.10 [ 0.405491] videodev: Linux video capture interface: v2.00 [ 0.405773] pps_core: LinuxPPS API ver. 1 registered [ 0.405784] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.405803] PTP clock support registered [ 0.405997] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.406306] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.406390] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.407089] Registered efivars operations [ 0.412715] FPGA manager framework [ 0.412857] Advanced Linux Sound Architecture Driver Initialized. [ 0.413429] Bluetooth: Core ver 2.22 [ 0.413467] NET: Registered protocol family 31 [ 0.413478] Bluetooth: HCI device and connection manager initialized [ 0.413492] Bluetooth: HCI socket layer initialized [ 0.413507] Bluetooth: L2CAP socket layer initialized [ 0.413528] Bluetooth: SCO socket layer initialized [ 0.416031] camchar: rtcpu character device driver loaded [ 0.417133] clocksource: Switched to clocksource arch_sys_counter [ 0.858640] VFS: Disk quotas dquot_6.6.0 [ 0.858732] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.859234] pnp: PnP ACPI: disabled [ 0.874370] la/ptsa driver initialized. [ 0.874535] NET: Registered protocol family 2 [ 0.874779] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.882423] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.882550] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.882900] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.883527] TCP: Hash tables configured (established 65536 bind 65536) [ 0.883755] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.883906] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.884190] NET: Registered protocol family 1 [ 0.885017] RPC: Registered named UNIX socket transport module. [ 0.885046] RPC: Registered udp transport module. [ 0.885101] RPC: Registered tcp transport module. [ 0.885117] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.885141] PCI: CLS 0 bytes, default 64 [ 0.885401] Trying to unpack rootfs image as initramfs... [ 1.145551] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.148556] Freeing initrd memory: 8196K [ 1.152644] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.152676] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.152734] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.153129] kvm [1]: IPA Size Limit: 40 bits [ 1.153571] kvm [1]: vgic interrupt IRQ9 [ 1.154191] kvm [1]: VHE mode initialized successfully [ 1.155639] Initialise system trusted keyrings [ 1.155912] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.162488] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.163438] NFS: Registering the id_resolver key type [ 1.163475] Key type id_resolver registered [ 1.163490] Key type id_legacy registered [ 1.163600] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.163624] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.163666] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.173666] NET: Registered protocol family 38 [ 1.173689] Key type asymmetric registered [ 1.173704] Asymmetric key parser 'x509' registered [ 1.173758] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.174069] io scheduler mq-deadline registered [ 1.174093] io scheduler kyber registered [ 1.179667] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.182497] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.182601] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.182696] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.182765] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.182832] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.187969] scrncapt: init (heads:4 wins:6 planes:4) [ 1.188099] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.189021] EINJ: ACPI disabled. [ 1.192155] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.192204] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.192221] tegra-pmc: ### PMC reset level: L1 [ 1.192238] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.192315] tegra-pmc: PMC Prod config success [ 1.197165] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.204517] random: fast init done [ 1.213942] printk: console [ttyTCU0] enabled [ 2.754440] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.758896] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.763505] arm-smmu 10000000.iommu: stage 1 translation [ 2.769205] arm-smmu 10000000.iommu: stage 2 translation [ 2.774485] arm-smmu 10000000.iommu: nested translation [ 2.780084] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.787257] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.798306] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.800332] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.806917] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.814375] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.819957] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.824679] arm-smmu 12000000.iommu: stage 1 translation [ 2.829932] arm-smmu 12000000.iommu: stage 2 translation [ 2.835638] arm-smmu 12000000.iommu: nested translation [ 2.840806] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.847988] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.859137] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.861095] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.867905] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.875092] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.885026] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.888324] tegra_profiler: auth: init [ 2.892571] THERMAL EST: found 3 subdevs [ 2.895742] THERMAL EST num_resources: 0 [ 2.899843] [THERMAL EST subdev 0] [ 2.902912] [THERMAL EST subdev 1] [ 2.906577] [THERMAL EST subdev 2] [ 2.909566] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.916082] THERMAL EST: thz register success. [ 2.920274] THERMAL EST: end of probe, return err: 0 [ 2.925821] nvsciipc: loaded module [ 2.933186] tun: Universal TUN/TAP device driver, 1.6 [ 2.935313] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.941336] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.947142] e1000e: Intel(R) PRO/1000 Network Driver [ 2.951820] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.958154] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.963452] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.969628] PPP generic driver version 2.4.2 [ 2.973909] PPP BSD Compression module registered [ 2.978207] PPP Deflate Compression module registered [ 2.983424] PPP MPPE Compression module registered [ 2.988689] usbcore: registered new interface driver r8152 [ 2.994204] usbcore: registered new interface driver asix [ 2.999537] usbcore: registered new interface driver ax88179_178a [ 3.005654] usbcore: registered new interface driver cdc_ether [ 3.011348] usbcore: registered new interface driver net1080 [ 3.016947] usbcore: registered new interface driver cdc_subset [ 3.023282] usbcore: registered new interface driver zaurus [ 3.028717] usbcore: registered new interface driver cdc_ncm [ 3.034392] usbcore: registered new interface driver aqc111 [ 3.040011] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.046332] ohci-pci: OHCI PCI platform driver [ 3.050378] ohci-platform: OHCI generic platform driver [ 3.056273] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.062829] usbcore: registered new interface driver uas [ 3.066950] usbcore: registered new interface driver usb-storage [ 3.072837] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.079052] mousedev: PS/2 mouse device common for all mice [ 3.083833] usbcore: registered new interface driver xpad [ 3.092091] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.094845] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.102624] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.109146] i2c /dev entries driver [ 3.112513] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.118576] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.123349] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.128755] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.134387] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.139838] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.145300] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.158897] device-mapper: uevent: version 1.0.3 [ 3.159362] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.165799] cpuidle: Initializing cpuidle driver [ 3.169630] sdhci: Secure Digital Host Controller Interface driver [ 3.174422] sdhci: Copyright(c) Pierre Ossman [ 3.178278] Synopsys Designware Multimedia Card Interface Driver [ 3.184727] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.190740] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.191494] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.203633] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.226673] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.236329] vdd-1v0: supplied by regulator-dummy [ 3.241944] vdd-1v8-hs: supplied by regulator-dummy [ 3.246741] vdd-1v8-ls: supplied by regulator-dummy [ 3.251642] vdd-1v8-ao: supplied by regulator-dummy [ 3.255597] vddio-ddr-1v1: supplied by regulator-dummy [ 3.260169] vdd-rtc: supplied by regulator-dummy [ 3.261946] spmic-ldo1: supplied by regulator-dummy [ 3.263221] vdd-ao-3v3: supplied by regulator-dummy [ 3.269612] vddio-emmc-3v3: supplied by regulator-dummy [ 3.276115] spmic-ldo4: supplied by regulator-dummy [ 3.277450] vdd-usb-3v3: supplied by regulator-dummy [ 3.283624] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.289895] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.295473] spmic-ldo8: supplied by vdd-1v8-ls [ 3.297043] gpio-510 (gpio_default): hogged as output/high [ 3.298478] gpio-511 (gpio_default): hogged as output/high [ 3.301430] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.437200] max77686-rtc max77620-rtc: registered as rtc0 [ 3.438282] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.438651] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.268449] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.269749] hid: raw HID events driver (C) Jiri Kosina [ 4.270625] usbcore: registered new interface driver usbhid [ 4.270779] usbhid: USB HID core driver [ 4.272844] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.274283] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.994066] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.068100] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.843 ms) ÿá[ 4.358593] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.359106] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.359988] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.360760] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.362736] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.363384] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.363910] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.365145] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.365349] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.367717] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.374906] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.381281] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.385900] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.392018] denver_knobs_init:MTS_VERSION:55637613 [ 4.403981] t19x_cache tegra-cache: probed [ 4.406985] optee: probing for conduit method. [ 4.407828] optee: revision 3.16 (65cc2218) [ 4.408837] optee: dynamic shared memory is enabled [ 4.413629] optee: initialized driver [ 4.419660] nvpmodel: initialized successfully [ 4.421322] tegra_hv: get_hvd: not initialized yet [ 4.425535] user_ivc_mempool: hypervisor not present [ 4.431765] usbcore: registered new interface driver snd-usb-audio [ 4.437941] u32 classifier [ 4.439257] input device check on [ 4.443044] Actions configured [ 4.446876] Initializing XFRM netlink socket [ 4.451924] NET: Registered protocol family 10 [ 4.457745] Segment Routing with IPv6 [ 4.458850] NET: Registered protocol family 17 [ 4.463374] NET: Registered protocol family 15 [ 4.467535] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.481537] Bluetooth: RFCOMM socket layer initialized [ 4.485863] Bluetooth: RFCOMM ver 1.11 [ 4.489976] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.495564] Bluetooth: HIDP socket layer initialized [ 4.501407] 9pnet: Installing 9P2000 support [ 4.504960] Key type dns_resolver registered [ 4.510305] registered taskstats version 1 [ 4.513496] Loading compiled-in X.509 certificates [ 4.525734] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.529273] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.539488] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.541491] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.550243] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.558338] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.673166] tegra194-pcie 14160000.pcie: Link up [ 4.676007] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.676259] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.676444] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.676676] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.676863] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.677264] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.677715] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.686906] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.687645] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.688047] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.689867] pci 0004:01:00.0: supports D1 D2 [ 4.690018] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.698286] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.698598] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.698822] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.699230] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.699496] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.701676] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.707714] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.715087] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.723920] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.734464] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.739030] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.744608] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.751261] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.760296] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.761622] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.770290] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.778502] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.894003] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.894621] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.894833] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.895028] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.895311] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.895506] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.895885] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.896294] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.910136] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.910457] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.912383] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.914044] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.915622] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.917292] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.918369] pci 0005:00:00.0: Removing from iommu group 7 [ 5.918679] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.947841] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.968891] host1x 13e10000.host1x: initialized [ 5.970695] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.971649] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.972714] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.973475] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.974526] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.975129] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.976064] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.977557] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.986990] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.994231] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.004346] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.011237] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.021139] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.027850] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.038066] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.044991] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.054819] falcon 15340000.vic: Adding to iommu group 17 [ 6.069345] falcon 15340000.vic: initialized [ 6.070410] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.075763] falcon 15380000.nvjpg: initialized [ 6.076381] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.088211] falcon 154c0000.nvenc: initialized [ 6.088780] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.097810] falcon 15a80000.nvenc1: initialized [ 6.098434] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.109748] nvdec 15480000.nvdec: initialized [ 6.110304] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.119589] nvdec 15140000.nvdec1: initialized [ 6.120092] tsec 15500000.tsec: Adding to iommu group 18 [ 6.125409] tsec 15500000.tsec: initialized [ 6.125833] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.135204] tsec 15100000.tsecb: initialized [ 6.138882] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.164357] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.176479] gpio-374 (wifi-enable): hogged as output/high [ 6.176823] gpio-431 (camera-control-output-low): hogged as output/low [ 6.177192] gpio-432 (camera-control-output-low): hogged as output/low [ 6.179219] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.181010] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.181752] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.186148] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.191610] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.197326] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.202807] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.211605] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.218546] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.230510] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.235555] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.241052] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.249877] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.259437] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.266767] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.274274] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.280397] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.290500] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.296492] pva 16000000.pva0: Adding to iommu group 22 [ 6.321984] pva 16000000.pva0: initialized [ 6.326819] pva 16800000.pva1: Adding to iommu group 23 [ 6.337630] pva 16800000.pva1: initialized [ 6.342331] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.355047] nvdla 15880000.nvdla0: initialized [ 6.356604] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.364930] nvdla 158c0000.nvdla1: initialized [ 6.368648] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.368825] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.368966] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.369354] tegradc 15200000.display: Adding to iommu group 26 [ 6.369366] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.369474] tegradccommon 15200000.display-hub: dma mapping done [ 6.370307] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.378043] tegradc 15210000.display: Adding to iommu group 26 [ 6.378384] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.378552] generic_infoframe_type: 0x87 [ 6.378659] tegradc 15200000.display: DT parsed successfully [ 6.378745] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.380996] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.409680] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.416027] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.424143] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.424147] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.438193] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.446024] tegra_cec 3960000.tegra_cec: probed [ 6.452077] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.457664] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.468978] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.470567] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.486819] kfuse 3830000.kfuse: initialized [ 6.491163] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.491298] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.504371] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.504438] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.510904] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.519873] tegradc 15210000.display: disp0 connected to head1->sor [ 6.524694] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.530081] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.540074] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.546148] tegradc 15210000.display: DT parsed successfully [ 6.552354] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.557262] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.575160] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.580787] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.600265] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.600672] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.604167] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.612243] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.621373] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.627862] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.635089] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.642064] usb usb1: Product: xHCI Host Controller [ 6.647264] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.653640] usb usb1: SerialNumber: 3610000.xhci [ 6.659371] hub 1-0:1.0: USB hub found [ 6.661948] hub 1-0:1.0: 4 ports detected [ 6.666640] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.671532] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.679136] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.686805] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.694500] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.701738] usb usb2: Product: xHCI Host Controller [ 6.706937] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.713164] usb usb2: SerialNumber: 3610000.xhci [ 6.718528] hub 2-0:1.0: USB hub found [ 6.721671] hub 2-0:1.0: 4 ports detected [ 6.761598] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.767416] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.768771] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.768984] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.783187] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.784223] tegra194-cpufreq ccplex: probed with BWMGR [ 6.785485] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.786143] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.786650] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.787951] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.797160] mmc0: CQHCI version 5.10 [ 6.797933] tegra194-vi5 15c10000.vi: initialized [ 6.800327] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.801476] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.805569] generic_infoframe_type: 0x87 [ 6.811758] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.815384] tegradc 15200000.display: DT parsed successfully [ 6.823865] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.829283] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.843842] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.844549] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.850466] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.857806] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.858569] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.858572] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.859387] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.865072] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.872872] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.885130] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.889622] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.895153] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.902920] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.908095] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.909360] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.914541] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.929129] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.934528] tegradc 15200000.display: probed [ 6.939710] nvethernet 2490000.ethernet: Macsec not supported [ 6.965497] mmc0: Command Queue Engine enabled [ 6.969992] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.973044] mmc0: periodic cache flush enabled [ 6.979918] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.983039] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.991004] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.996059] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.001139] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.007665] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.016039] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.030924] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.035289] tegra-se-nvhost 15810000.se: initialized [ 7.053136] Console: switching to colour frame buffer device 240x67 [ 7.057815] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.058888] tegradc 15200000.display: fb registered [ 7.065738] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.070224] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.076938] tegra-se-nvhost 15820000.se: initialized [ 7.087436] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.089165] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.099073] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.099501] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.111933] tegra-se-nvhost 15830000.se: initialized [ 7.117284] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.122986] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.129270] tegra-se-nvhost 15840000.se: initialized [ 7.135108] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.141004] tegra_actmon d230000.actmon: in actmon_register()... [ 7.145771] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.145956] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.154067] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.160036] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.166518] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.167719] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.168788] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.168796] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.169419] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.169423] Extcon AUX1(HDMI) enable [ 7.169558] tegradc 15210000.display: disp1 connected to head1->sor [ 7.169693] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.169766] tegradc 15210000.display: DT parsed successfully [ 7.169799] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.169914] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.169922] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.175624] hvc_sysfs: hypervisor is not present [ 7.176674] tegradc 15210000.display: probed [ 7.179427] usb 1-2: Manufacturer: Generic [ 7.181570] hub 1-2:1.0: USB hub found [ 7.190450] random: crng init done [ 7.274841] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.274846] tegradc 15210000.display: fb registered [ 7.274940] hub 1-2:1.0: 4 ports detected [ 7.300248] ALSA device list: [ 7.300350] No soundcards found. [ 7.304386] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.304900] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.305343] Freeing unused kernel memory: 3968K [ 7.312961] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.322965] tegradc 15210000.display: blank - powerdown [ 7.328112] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.336203] Extcon DP: HPD disabled [ 7.336295] Run /init as init process [ 7.339431] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.350284] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.350297] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.356210] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.363904] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.363910] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.363914] usb 2-3: Manufacturer: Generic ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.387086] tegradc 15200000.display: blank - powerdown [ 7.395597] hub 2-3:1.0: USB hub found [ 7.397548] hub 2-3:1.0: 4 ports detected [ 7.401050] Root device found: mmcblk0p1 [ 7.403090] Found dev node: /dev/mmcblk0p1 [ 7.434833] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.434838] Extcon AUX1(HDMI) disable [ 7.438952] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.443004] Rootfs mounted over mmcblk0p1 [ 7.457102] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.457139] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.457145] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.458251] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.459203] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.473002] tegradc 15200000.display: unblank [ 7.474604] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.474796] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.481692] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.483695] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.484162] Switching from initrd to actual rootfs [ 7.487766] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.487772] Extcon AUX1(HDMI) enable [ 7.500517] tegradc 15200000.display: sync windows ret = 247 [ 7.541867] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.548844] Extcon HDMI: HPD enabled [ 7.552512] tegradc 15200000.display: hdmi: plugged [ 7.606412] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.607835] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.609173] usb 1-3: Product: Bluetooth Radio [ 7.610405] usb 1-3: Manufacturer: Realtek [ 7.611624] usb 1-3: SerialNumber: 00e04c000001 [ 7.625837] systemd[1]: System time before build time, advancing clock. [ 7.697416] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.702279] systemd[1]: Detected architecture arm64. [ 7.741896] systemd[1]: Set hostname to . [ 7.909468] systemd-sysv-generator[250]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.262425] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.264098] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.269566] systemd[1]: Created slice system-modprobe.slice. [ 8.274042] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.278056] systemd[1]: Created slice User and Session Slice. [ 8.281316] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.285337] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.288511] systemd[1]: Reached target User and Group Name Lookups. [ 8.291614] systemd[1]: Reached target Slices. [ 8.294774] systemd[1]: Reached target Swap. [ 8.298685] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.302325] systemd[1]: Listening on Syslog Socket. [ 8.305818] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.309191] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.313385] systemd[1]: Listening on Journal Audit Socket. [ 8.317119] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.320913] systemd[1]: Listening on Journal Socket. [ 8.324657] systemd[1]: Listening on udev Control Socket. [ 8.329511] systemd[1]: Listening on udev Kernel Socket. [ 8.339503] systemd[1]: Mounting Huge Pages File System... [ 8.347870] systemd[1]: Mounting POSIX Message Queue File System... [ 8.356089] systemd[1]: Mounting RPC Pipe File System... [ 8.364783] systemd[1]: Mounting Kernel Debug File System... [ 8.373486] systemd[1]: Mounting Kernel Trace File System... [ 8.383423] systemd[1]: Starting Journal Service... [ 8.392635] systemd[1]: Starting Set the console keyboard layout... [ 8.401226] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.404817] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.411232] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.419379] systemd[1]: Started Nameserver information manager. [ 8.424209] systemd[1]: Reached target Network (Pre). [ 8.431528] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.433483] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.443753] systemd[1]: Starting Load Kernel Modules... [ 8.451833] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.462268] systemd[1]: Starting udev Coldplug all Devices... [ 8.472361] systemd[1]: Mounted Huge Pages File System. [ 8.476209] systemd[1]: Mounted POSIX Message Queue File System. [ 8.480018] systemd[1]: Mounted RPC Pipe File System. [ 8.483831] systemd[1]: Mounted Kernel Debug File System. [ 8.483881] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.484046] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.484490] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.484496] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.484505] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.484509] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.485471] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.485657] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.485816] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.485822] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.504593] systemd[1]: Mounted Kernel Trace File System. [ 8.510836] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.516242] systemd[1]: nvfb-udev.service: Succeeded. [ 8.520940] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.532883] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.545712] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.547488] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.554342] systemd[1]: Starting Load/Save Random Seed... [ 8.564359] systemd[1]: Starting Create System Users... [ 8.573710] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.573710] [ 8.611168] systemd[1]: Finished Load/Save Random Seed. [ 8.617768] systemd[1]: Finished Load Kernel Modules. [ 8.622573] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.629320] systemd[1]: Mounting Kernel Configuration File System... [ 8.637184] systemd[1]: Started OP-TEE Client Supplicant. [ 8.646890] systemd[1]: Starting Apply Kernel Variables... [ 8.656369] systemd[1]: Finished Set the console keyboard layout. [ 8.660807] systemd[1]: Mounted Kernel Configuration File System. [ 8.671752] systemd[1]: Finished Create System Users. [ 10.051546] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.058080] imx219 9-0010: board setup failed [ 10.058167] imx219: probe of 9-0010 failed with error -121 [ 10.069160] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.075370] imx219 10-0010: board setup failed [ 10.075467] imx219: probe of 10-0010 failed with error -121 [ 10.155528] hot-surface-alert cooling state: 0 -> 1 [ 10.585990] using random self ethernet address [ 10.595810] using random host ethernet address [ 11.756645] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.756651] Creating 1 MTD partitions on "spi6.0": [ 11.756660] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.381778] using random self ethernet address [ 12.383694] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.807042] nvidia: loading out-of-tree module taints kernel. [ 59.094730] watchdog: watchdog0: watchdog did not stop! [ 59.534859] Trying to unregister non-registered hwtime source [ 62.596324] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.597963] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ôÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized noc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized entering main console loop ] extras_post initialized bpmp: init complete ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.589] I> regulator 'vdd-hdmi-5v0' already enabled [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> hdmi cable connected [0003.599] W> set volts not configured for 'vdd-1v0' [0003.603] W> set volts not configured for 'vdd-1v8-hs' [0003.603] I> retrieved tmds range from prod_list_hdmi_soc [0003.608] E> invalid display type [0003.609] E> cannot find any other nvdisp nodes [0003.627] I> edid read success [0003.639] I> edid read success [0003.640] I> width = 640, height = 480, frequency = 25174825 [0003.640] I> width = 1920, height = 1080, frequency = 148500000 [0003.640] I> width = 1280, height = 768, frequency = 79500000 [0003.641] I> width = 1360, height = 768, frequency = 85500000 [0003.641] I> width = 720, height = 480, frequency = 26973026 [0003.645] I> width = 720, height = 576, frequency = 26973026 [0003.651] I> width = 1280, height = 720, frequency = 74175824 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1920, height = 1080, frequency = 148351648 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 720, height = 480, frequency = 26973026 [0003.679] I> width = 720, height = 576, frequency = 26973026 [0003.685] I> width = 3840, height = 2160, frequency = 296703296 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 4096, height = 2160, frequency = 296703296 [0003.713] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.725] I> hdmi_enable, starting HDMI initialisation [0003.729] I> hdmi_enable, HDMI initialisation complete [0003.739] initializing target [0003.740] calling apps_init() [0003.741] starting app kernel_boot_app [0003.741] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000881] Console: colour dummy device 80x25 [ 0.002420] printk: console [tty0] enabled [ 0.002480] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002535] pid_max: default: 32768 minimum: 301 [ 0.002731] LSM: Security Framework initializing [ 0.002787] Yama: becoming mindful. [ 0.002830] SELinux: Initializing. [ 0.003031] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003072] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006040] rcu: Hierarchical SRCU implementation. [ 0.006304] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007169] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007219] DTB Build time: Aug 10 2022 20:31:49 [ 0.010228] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010530] Remapping and enabling EFI services. [ 0.012474] smp: Bringing up secondary CPUs ... [ 0.041945] Detected PIPT I-cache on CPU1 [ 0.042005] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071661] Detected PIPT I-cache on CPU2 [ 0.071735] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101365] Detected PIPT I-cache on CPU3 [ 0.101432] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131120] Detected PIPT I-cache on CPU4 [ 0.131224] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160900] Detected PIPT I-cache on CPU5 [ 0.160970] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161302] smp: Brought up 1 node, 6 CPUs [ 0.161630] SMP: Total of 6 processors activated. [ 0.161694] CPU features: detected: Privileged Access Never [ 0.161724] CPU features: detected: LSE atomic instructions [ 0.161745] CPU features: detected: User Access Override [ 0.161766] CPU features: detected: 32-bit EL0 Support [ 0.161785] CPU features: detected: RAS Extension Support [ 0.161816] CPU features: detected: CRC32 instructions [ 0.161834] CPU features: detected: 32-bit EL1 Support [ 0.228843] CPU: All CPU(s) started at EL2 [ 0.234353] devtmpfs: initialized [ 0.285820] Registered cp15_barrier emulation handler [ 0.285957] Registered setend emulation handler [ 0.285984] KASLR enabled [ 0.286202] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286235] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287804] pinctrl core: initialized pinctrl subsystem [ 0.288766] SMBIOS 3.0.0 present. [ 0.288806] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289397] NET: Registered protocol family 16 [ 0.291367] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292110] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293038] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.293109] audit: initializing netlink subsys (disabled) [ 0.293409] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293765] thermal_sys: Registered thermal governor 'step_wise' [ 0.293772] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293792] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295823] cpuidle: using governor menu [ 0.296717] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297143] ASID allocator initialised with 32768 entries [ 0.297337] Serial: AMBA PL011 UART driver [ 0.300667] Tegra reboot handler registered. [ 0.362952] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.363112] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.363321] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.363389] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.363536] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.363582] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.363742] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.363791] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.363921] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.363966] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.366306] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.366344] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.366378] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.366410] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.366445] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.366488] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.366524] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.366573] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.366602] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.366646] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.366675] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.366721] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.366751] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.366780] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.366818] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.366850] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.366880] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.366968] mc-err: mcerr ops are set to t19x [ 0.377982] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.378015] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.378033] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.378050] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.385092] ACPI: Interpreter disabled. [ 0.386178] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.387441] iommu: Default domain type: Translated [ 0.387526] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.387950] SCSI subsystem initialized [ 0.388096] usbcore: registered new interface driver usbfs [ 0.388139] usbcore: registered new interface driver hub [ 0.388175] usbcore: registered new device driver usb [ 0.388562] mc: Linux media interface: v0.10 [ 0.388594] videodev: Linux video capture interface: v2.00 [ 0.388930] pps_core: LinuxPPS API ver. 1 registered [ 0.388946] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.388974] PTP clock support registered [ 0.389170] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.389486] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.389544] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.390157] Registered efivars operations [ 0.395005] FPGA manager framework [ 0.395105] Advanced Linux Sound Architecture Driver Initialized. [ 0.395700] Bluetooth: Core ver 2.22 [ 0.395741] NET: Registered protocol family 31 [ 0.395757] Bluetooth: HCI device and connection manager initialized [ 0.395777] Bluetooth: HCI socket layer initialized [ 0.395797] Bluetooth: L2CAP socket layer initialized [ 0.395823] Bluetooth: SCO socket layer initialized [ 0.397386] camchar: rtcpu character device driver loaded [ 0.397945] clocksource: Switched to clocksource arch_sys_counter [ 0.682060] VFS: Disk quotas dquot_6.6.0 [ 0.682152] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.682498] pnp: PnP ACPI: disabled [ 0.693380] la/ptsa driver initialized. [ 0.693514] NET: Registered protocol family 2 [ 0.693693] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.699014] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.699086] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.699395] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.699827] TCP: Hash tables configured (established 65536 bind 65536) [ 0.699952] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.700042] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.700274] NET: Registered protocol family 1 [ 0.700913] RPC: Registered named UNIX socket transport module. [ 0.700928] RPC: Registered udp transport module. [ 0.700938] RPC: Registered tcp transport module. [ 0.700947] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.700962] PCI: CLS 0 bytes, default 64 [ 0.701131] Trying to unpack rootfs image as initramfs... [ 0.886929] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.889137] Freeing initrd memory: 8196K [ 0.892880] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.892930] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.892973] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.893370] kvm [1]: IPA Size Limit: 40 bits [ 0.893816] kvm [1]: vgic interrupt IRQ9 [ 0.894338] kvm [1]: VHE mode initialized successfully [ 0.895442] Initialise system trusted keyrings [ 0.895724] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.899808] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.900442] NFS: Registering the id_resolver key type [ 0.900473] Key type id_resolver registered [ 0.900487] Key type id_legacy registered [ 0.900568] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.900594] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.900650] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.908406] NET: Registered protocol family 38 [ 0.908433] Key type asymmetric registered [ 0.908447] Asymmetric key parser 'x509' registered [ 0.908490] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.908713] io scheduler mq-deadline registered [ 0.908732] io scheduler kyber registered [ 0.912867] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.914877] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.914939] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.915014] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.915097] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.915172] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.919427] scrncapt: init (heads:4 wins:6 planes:4) [ 0.919690] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.920441] EINJ: ACPI disabled. [ 0.923040] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.923071] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.923086] tegra-pmc: ### PMC reset level: L1 [ 0.923099] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.923162] tegra-pmc: PMC Prod config success [ 0.927839] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.931976] random: fast init done [ 0.932174] printk: console [ttyTCU0] enabled [ 2.484326] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.489400] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.493882] arm-smmu 10000000.iommu: stage 1 translation [ 2.499151] arm-smmu 10000000.iommu: stage 2 translation [ 2.504643] arm-smmu 10000000.iommu: nested translation [ 2.510246] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.517411] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.526225] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.530283] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.536838] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.544263] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.549881] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.554605] arm-smmu 12000000.iommu: stage 1 translation [ 2.560370] arm-smmu 12000000.iommu: stage 2 translation [ 2.565540] arm-smmu 12000000.iommu: nested translation [ 2.570982] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.578143] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.587114] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.591530] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.597836] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.605379] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.614901] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.618249] tegra_profiler: auth: init [ 2.622392] THERMAL EST: found 3 subdevs [ 2.626184] THERMAL EST num_resources: 0 [ 2.629755] [THERMAL EST subdev 0] [ 2.633358] [THERMAL EST subdev 1] [ 2.636759] [THERMAL EST subdev 2] [ 2.639772] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.646145] THERMAL EST: thz register success. [ 2.650701] THERMAL EST: end of probe, return err: 0 [ 2.655871] nvsciipc: loaded module [ 2.662041] tun: Universal TUN/TAP device driver, 1.6 [ 2.665076] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.671548] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.677320] e1000e: Intel(R) PRO/1000 Network Driver [ 2.682021] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.688084] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.693663] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.699466] PPP generic driver version 2.4.2 [ 2.703814] PPP BSD Compression module registered [ 2.708355] PPP Deflate Compression module registered [ 2.713877] PPP MPPE Compression module registered [ 2.718632] usbcore: registered new interface driver r8152 [ 2.724389] usbcore: registered new interface driver asix [ 2.729445] usbcore: registered new interface driver ax88179_178a [ 2.735846] usbcore: registered new interface driver cdc_ether [ 2.741797] usbcore: registered new interface driver net1080 [ 2.747134] usbcore: registered new interface driver cdc_subset [ 2.753445] usbcore: registered new interface driver zaurus [ 2.759132] usbcore: registered new interface driver cdc_ncm [ 2.764805] usbcore: registered new interface driver aqc111 [ 2.770409] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.776518] ohci-pci: OHCI PCI platform driver [ 2.780831] ohci-platform: OHCI generic platform driver [ 2.786514] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.792475] usbcore: registered new interface driver uas [ 2.796859] usbcore: registered new interface driver usb-storage [ 2.803175] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.808832] mousedev: PS/2 mouse device common for all mice [ 2.814032] usbcore: registered new interface driver xpad [ 2.822109] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.824743] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.832798] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.838938] i2c /dev entries driver [ 2.842639] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.848452] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.853709] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.859145] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.864270] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.870006] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.875183] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.887995] device-mapper: uevent: version 1.0.3 [ 2.888346] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.895157] cpuidle: Initializing cpuidle driver [ 2.899545] sdhci: Secure Digital Host Controller Interface driver [ 2.904619] sdhci: Copyright(c) Pierre Ossman [ 2.908462] Synopsys Designware Multimedia Card Interface Driver [ 2.914604] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.920910] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.921558] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.934004] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.951426] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.960291] vdd-1v0: supplied by regulator-dummy [ 2.965632] vdd-1v8-hs: supplied by regulator-dummy [ 2.970333] vdd-1v8-ls: supplied by regulator-dummy [ 2.974938] vdd-1v8-ao: supplied by regulator-dummy [ 2.978676] vddio-ddr-1v1: supplied by regulator-dummy [ 2.982944] vdd-rtc: supplied by regulator-dummy [ 2.984470] spmic-ldo1: supplied by regulator-dummy [ 2.985607] vdd-ao-3v3: supplied by regulator-dummy [ 2.991646] vddio-emmc-3v3: supplied by regulator-dummy [ 2.997752] spmic-ldo4: supplied by regulator-dummy [ 2.998915] vdd-usb-3v3: supplied by regulator-dummy [ 3.005599] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.011645] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.017060] spmic-ldo8: supplied by vdd-1v8-ls [ 3.018461] gpio-510 (gpio_default): hogged as output/high [ 3.020608] gpio-511 (gpio_default): hogged as output/high [ 3.027420] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.166282] max77686-rtc max77620-rtc: registered as rtc0 [ 3.167520] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.167820] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.878805] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.879832] hid: raw HID events driver (C) Jiri Kosina [ 3.880490] usbcore: registered new interface driver usbhid [ 3.880633] usbhid: USB HID core driver [ 3.882280] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.883404] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.912252] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.987945] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.502 ms) ÿá[ 3.969031] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.969614] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.970654] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.971318] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.972840] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.973409] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.974110] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.975469] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.975833] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.977612] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.985295] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.991862] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.996846] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.002715] denver_knobs_init:MTS_VERSION:55637613 [ 4.014998] t19x_cache tegra-cache: probed [ 4.017329] optee: probing for conduit method. [ 4.018337] optee: revision 3.16 (65cc2218) [ 4.019088] optee: dynamic shared memory is enabled [ 4.023744] optee: initialized driver [ 4.031683] nvpmodel: initialized successfully [ 4.032370] tegra_hv: get_hvd: not initialized yet [ 4.035946] user_ivc_mempool: hypervisor not present [ 4.042594] usbcore: registered new interface driver snd-usb-audio [ 4.049184] u32 classifier [ 4.049649] input device check on [ 4.053500] Actions configured [ 4.057007] Initializing XFRM netlink socket [ 4.062054] NET: Registered protocol family 10 [ 4.067839] Segment Routing with IPv6 [ 4.069451] NET: Registered protocol family 17 [ 4.073519] NET: Registered protocol family 15 [ 4.078142] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.091691] Bluetooth: RFCOMM socket layer initialized [ 4.096615] Bluetooth: RFCOMM ver 1.11 [ 4.100329] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.106047] Bluetooth: HIDP socket layer initialized [ 4.111932] 9pnet: Installing 9P2000 support [ 4.115678] Key type dns_resolver registered [ 4.120614] registered taskstats version 1 [ 4.123783] Loading compiled-in X.509 certificates [ 4.135532] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.140197] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.149678] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.152018] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.160254] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.168700] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.286036] tegra194-pcie 14160000.pcie: Link up [ 4.288725] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.288956] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.289107] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.289343] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.289585] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.290007] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.290424] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.300398] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.300910] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.301396] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.303033] pci 0004:01:00.0: supports D1 D2 [ 4.303238] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.313086] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.313507] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.313746] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.314300] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.314547] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.314735] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.320927] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.328269] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.336680] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.346782] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.351459] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.357349] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.364134] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.373345] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.374787] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.382970] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.391850] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.498063] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.498791] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.499008] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.499158] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.499468] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.499673] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.500068] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.500478] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.518636] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.519054] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.521192] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.522698] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.524137] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.525785] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.526801] pci 0005:00:00.0: Removing from iommu group 7 [ 5.527135] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.556363] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.579695] host1x 13e10000.host1x: initialized [ 5.581663] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.582851] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.584274] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.585149] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.586767] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.587543] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.588681] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.589492] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.591820] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.598182] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.608557] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.614960] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.625082] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.632135] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.642368] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.648933] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.658797] falcon 15340000.vic: Adding to iommu group 17 [ 5.673799] falcon 15340000.vic: initialized [ 5.674759] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.680257] falcon 15380000.nvjpg: initialized [ 5.680898] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.691165] falcon 154c0000.nvenc: initialized [ 5.691748] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.701178] falcon 15a80000.nvenc1: initialized [ 5.701733] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.714213] nvdec 15480000.nvdec: initialized [ 5.714806] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.724203] nvdec 15140000.nvdec1: initialized [ 5.724678] tsec 15500000.tsec: Adding to iommu group 18 [ 5.729924] tsec 15500000.tsec: initialized [ 5.730394] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.738773] tsec 15100000.tsecb: initialized [ 5.742359] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.767342] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.779539] gpio-374 (wifi-enable): hogged as output/high [ 5.779868] gpio-431 (camera-control-output-low): hogged as output/low [ 5.780163] gpio-432 (camera-control-output-low): hogged as output/low [ 5.781849] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.783778] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.784409] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.790159] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.795340] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.801373] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.806757] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.814790] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.822481] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.833786] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.839083] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.845052] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.853967] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.863427] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.870754] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.878524] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.884586] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.893821] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.900413] pva 16000000.pva0: Adding to iommu group 22 [ 5.925640] pva 16000000.pva0: initialized [ 5.931097] pva 16800000.pva1: Adding to iommu group 23 [ 5.942209] pva 16800000.pva1: initialized [ 5.947093] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.958804] nvdla 15880000.nvdla0: initialized [ 5.960021] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.968244] nvdla 158c0000.nvdla1: initialized [ 5.971014] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.971282] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.971579] tegradccommon 15200000.display-hub: dma mapping done [ 5.973195] tegradc 15200000.display: Adding to iommu group 26 [ 5.980387] tegradc 15200000.display: disp0 connected to head0->sor1 [ 5.980796] generic_infoframe_type: 0x87 [ 5.981033] tegradc 15200000.display: DT parsed successfully [ 5.981390] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 5.989402] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.992016] tegradc 15210000.display: Adding to iommu group 26 [ 5.996678] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.998185] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.014320] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.014551] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.022256] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.028138] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.036175] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.050188] tegra_cec 3960000.tegra_cec: probed [ 6.050443] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.055532] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.060429] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.072894] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.074572] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.090425] kfuse 3830000.kfuse: initialized [ 6.095156] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.095271] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.108191] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.108223] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.114991] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.123762] tegradc 15210000.display: disp0 connected to head1->sor [ 6.128083] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.133932] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.143886] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.150032] tegradc 15210000.display: DT parsed successfully [ 6.156736] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.161565] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.179473] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.184798] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.204293] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.204722] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.207858] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.216311] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.224767] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.231488] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.239145] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.246358] usb usb1: Product: xHCI Host Controller [ 6.251067] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.257411] usb usb1: SerialNumber: 3610000.xhci [ 6.263052] hub 1-0:1.0: USB hub found [ 6.265919] hub 1-0:1.0: 4 ports detected [ 6.270624] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.275386] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.283205] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.290961] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.298898] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.306072] usb usb2: Product: xHCI Host Controller [ 6.311023] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.317220] usb usb2: SerialNumber: 3610000.xhci [ 6.322926] hub 2-0:1.0: USB hub found [ 6.325704] hub 2-0:1.0: 4 ports detected [ 6.363354] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.368496] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.370111] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.370340] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.383507] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.384573] tegra194-cpufreq ccplex: probed with BWMGR [ 6.385822] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.386484] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.387017] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.388286] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.400657] mmc0: CQHCI version 5.10 [ 6.402623] tegra194-vi5 15c10000.vi: initialized [ 6.403987] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.404933] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.409613] generic_infoframe_type: 0x87 [ 6.415703] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.419738] tegradc 15200000.display: DT parsed successfully [ 6.427570] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.433364] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.439625] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.439631] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.439635] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.467360] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.467994] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.473847] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.478008] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.481879] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.481887] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.488745] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.496775] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.506024] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.512683] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.512878] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.527129] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.533336] nvethernet 2490000.ethernet: Macsec not supported [ 6.534710] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.539631] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.541997] tegradc 15200000.display: probed [ 6.551187] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.564814] mmc0: Command Queue Engine enabled [ 6.572059] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.579775] mmc0: periodic cache flush enabled [ 6.584028] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.589476] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.603523] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.605627] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.613779] tegra-se-nvhost 15810000.se: initialized [ 6.619758] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.630215] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.631907] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.637443] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.652660] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.655270] tegra-se-nvhost 15820000.se: initialized [ 6.674612] Console: switching to colour frame buffer device 240x67 [ 6.676069] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.680434] tegradc 15200000.display: fb registered [ 6.686839] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.691438] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.698186] tegra-se-nvhost 15830000.se: initialized [ 6.704242] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.709412] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.713985] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.720526] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.732850] tegra-se-nvhost 15840000.se: initialized [ 6.738905] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.745066] tegra_actmon d230000.actmon: in actmon_register()... [ 6.750025] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.755507] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.763859] hvc_sysfs: hypervisor is not present [ 6.780456] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.796473] ALSA device list: [ 6.796584] No soundcards found. [ 6.797572] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.797823] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.799277] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.801637] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.805720] Extcon AUX1(HDMI) enable [ 6.805825] tegradc 15210000.display: disp1 connected to head1->sor [ 6.814201] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.814209] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.817773] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.824184] usb 1-2: Manufacturer: Generic [ 6.831229] tegradc 15210000.display: DT parsed successfully [ 6.838271] hub 1-2:1.0: USB hub found [ 6.843112] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.848446] hub 1-2:1.0: 4 ports detected [ 6.853243] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.875255] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.888318] tegradc 15210000.display: probed [ 6.888684] tegradc 15210000.display: fb registered [ 6.894289] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.897896] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.905691] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.907064] Freeing unused kernel memory: 3968K [ 6.915874] tegradc 15210000.display: blank - powerdown [ 6.921003] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.922123] Run /init as init process [ 6.929493] Extcon DP: HPD disabled [ 6.929511] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.936532] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.950783] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.956529] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.968692] tegradc 15200000.display: blank - powerdown [ 6.976286] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.976292] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.976296] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.976299] usb 2-3: Manufacturer: Generic [ 6.986756] hub 2-3:1.0: USB hub found [ 6.989033] hub 2-3:1.0: 4 ports detected [ 7.002817] Root device found: mmcblk0p1 [ 7.004845] Found dev node: /dev/mmcblk0p1 [ 7.014217] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.014222] Extcon AUX1(HDMI) disable [ 7.037783] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.038745] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.040023] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.043936] Rootfs mounted over mmcblk0p1 [ 7.051924] tegradc 15200000.display: unblank [ 7.053035] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.053228] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.059734] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.061632] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.065718] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.065721] Extcon AUX1(HDMI) enable [ 7.073108] Switching from initrd to actual rootfs [ 7.074027] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.078393] tegradc 15200000.display: sync windows ret = 246 [ 7.102038] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.136114] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.138560] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.143126] Extcon HDMI: HPD enabled [ 7.143133] tegradc 15200000.display: hdmi: plugged [ 7.158760] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.241161] systemd[1]: System time before build time, advancing clock. [ 7.283244] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.284678] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.286059] usb 1-3: Product: Bluetooth Radio [ 7.287377] usb 1-3: Manufacturer: Realtek [ 7.288658] usb 1-3: SerialNumber: 00e04c000001 [ 7.310056] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.315073] systemd[1]: Detected architecture arm64. [ 7.352890] systemd[1]: Set hostname to . [ 7.522987] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.873788] random: systemd: uninitialized urandom read (16 bytes read) [ 7.875655] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.877254] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.882759] systemd[1]: Created slice system-modprobe.slice. [ 7.886354] random: systemd: uninitialized urandom read (16 bytes read) [ 7.888976] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.892120] random: systemd: uninitialized urandom read (16 bytes read) [ 7.894872] systemd[1]: Created slice User and Session Slice. [ 7.898415] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.902566] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.906079] systemd[1]: Reached target User and Group Name Lookups. [ 7.909304] systemd[1]: Reached target Slices. [ 7.912497] systemd[1]: Reached target Swap. [ 7.916538] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.920264] systemd[1]: Listening on Syslog Socket. [ 7.923980] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.927516] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.931967] systemd[1]: Listening on Journal Audit Socket. [ 7.937354] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.943217] systemd[1]: Listening on Journal Socket. [ 7.949557] systemd[1]: Listening on udev Control Socket. [ 7.955711] systemd[1]: Listening on udev Kernel Socket. [ 7.966892] systemd[1]: Mounting Huge Pages File System... [ 7.975589] systemd[1]: Mounting POSIX Message Queue File System... [ 7.983971] systemd[1]: Mounting RPC Pipe File System... [ 7.993119] systemd[1]: Mounting Kernel Debug File System... [ 8.003896] systemd[1]: Mounting Kernel Trace File System... [ 8.014175] systemd[1]: Starting Journal Service... [ 8.023314] systemd[1]: Starting Set the console keyboard layout... [ 8.031757] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.035364] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.042141] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.050360] systemd[1]: Started Nameserver information manager. [ 8.055560] systemd[1]: Reached target Network (Pre). [ 8.063053] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.065056] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.073169] systemd[1]: Starting Load Kernel Modules... [ 8.081246] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.090410] systemd[1]: Starting udev Coldplug all Devices... [ 8.100527] systemd[1]: Mounted Huge Pages File System. [ 8.104688] systemd[1]: Mounted POSIX Message Queue File System. [ 8.108728] systemd[1]: Mounted RPC Pipe File System. [ 8.112592] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.113405] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.116650] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.118307] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.119218] systemd[1]: Mounted Kernel Debug File System. [ 8.119828] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.122706] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.122892] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.123200] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.123405] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.123414] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.132906] systemd[1]: Mounted Kernel Trace File System. [ 8.140399] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.141829] random: crng init done [ 8.148007] random: 7 urandom warning(s) missed due to ratelimiting [ 8.158825] systemd[1]: nvfb-udev.service: Succeeded. [ 8.163204] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.173552] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.186124] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.187933] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.195423] systemd[1]: Starting Load/Save Random Seed... [ 8.204146] systemd[1]: Starting Create System Users... [ 8.222276] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.222276] [ 8.261257] systemd[1]: Finished Load Kernel Modules. [ 8.267784] systemd[1]: Finished Load/Save Random Seed. [ 8.272590] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.279257] systemd[1]: Mounting Kernel Configuration File System... [ 8.287344] systemd[1]: Started OP-TEE Client Supplicant. [ 8.296176] systemd[1]: Starting Apply Kernel Variables... [ 8.306043] systemd[1]: Finished Set the console keyboard layout. [ 8.310274] systemd[1]: Mounted Kernel Configuration File System. [ 8.324852] systemd[1]: Finished Create System Users. [ 9.608406] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.614903] imx219 9-0010: board setup failed [ 9.616256] imx219: probe of 9-0010 failed with error -121 [ 9.629994] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.641844] imx219 10-0010: board setup failed [ 9.646124] imx219: probe of 10-0010 failed with error -121 [ 9.730292] hot-surface-alert cooling state: 0 -> 1 [ 10.470550] using random self ethernet address [ 10.479910] using random host ethernet address [ 11.204448] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.205749] Creating 1 MTD partitions on "spi6.0": [ 11.207118] 0x000000000000-0x000002000000 : "Whole_flash0" [ 11.867382] using random self ethernet address [ 11.867388] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.823719] nvidia: loading out-of-tree module taints kernel. [ 58.604170] watchdog: watchdog0: watchdog did not stop! [ 59.087012] Trying to unregister non-registered hwtime source [ 62.144894] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.146512] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR]ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.617] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.647] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.649] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.748] calling apps_init() [0003.748] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000780] Console: colour dummy device 80x25 [ 0.002298] printk: console [tty0] enabled [ 0.002361] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002415] pid_max: default: 32768 minimum: 301 [ 0.002613] LSM: Security Framework initializing [ 0.002687] Yama: becoming mindful. [ 0.002725] SELinux: Initializing. [ 0.002922] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002960] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006041] rcu: Hierarchical SRCU implementation. [ 0.006295] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007147] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007235] DTB Build time: Aug 10 2022 20:31:49 [ 0.010312] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010588] Remapping and enabling EFI services. [ 0.013127] smp: Bringing up secondary CPUs ... [ 0.042283] Detected PIPT I-cache on CPU1 [ 0.042359] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075292] Detected PIPT I-cache on CPU2 [ 0.075368] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104907] Detected PIPT I-cache on CPU3 [ 0.104996] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134689] Detected PIPT I-cache on CPU4 [ 0.134794] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164389] Detected PIPT I-cache on CPU5 [ 0.164461] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164821] smp: Brought up 1 node, 6 CPUs [ 0.165132] SMP: Total of 6 processors activated. [ 0.165174] CPU features: detected: Privileged Access Never [ 0.165197] CPU features: detected: LSE atomic instructions [ 0.165230] CPU features: detected: User Access Override [ 0.165243] CPU features: detected: 32-bit EL0 Support [ 0.165256] CPU features: detected: RAS Extension Support [ 0.165268] CPU features: detected: CRC32 instructions [ 0.165281] CPU features: detected: 32-bit EL1 Support [ 0.232827] CPU: All CPU(s) started at EL2 [ 0.237890] devtmpfs: initialized [ 0.289141] Registered cp15_barrier emulation handler [ 0.289254] Registered setend emulation handler [ 0.289284] KASLR enabled [ 0.289622] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289651] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290720] pinctrl core: initialized pinctrl subsystem [ 0.291887] SMBIOS 3.0.0 present. [ 0.291922] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292596] NET: Registered protocol family 16 [ 0.294431] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.294919] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295633] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295698] audit: initializing netlink subsys (disabled) [ 0.296013] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296454] thermal_sys: Registered thermal governor 'step_wise' [ 0.296461] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296477] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298683] cpuidle: using governor menu [ 0.298973] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299542] ASID allocator initialised with 32768 entries [ 0.299817] Serial: AMBA PL011 UART driver [ 0.303929] Tegra reboot handler registered. [ 0.372381] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.372499] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.372729] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.372787] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.372920] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.372957] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.373079] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.373116] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.373242] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.373278] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.375805] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.375843] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.375874] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.375919] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.375950] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375981] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.376016] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.376047] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.376072] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.376127] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.376155] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.376199] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.376226] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.376249] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.376289] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.376313] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.376337] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.376423] mc-err: mcerr ops are set to t19x [ 0.388133] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.388156] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.388169] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.388181] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.394807] ACPI: Interpreter disabled. [ 0.395990] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.397395] iommu: Default domain type: Translated [ 0.397474] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.397875] SCSI subsystem initialized [ 0.398023] usbcore: registered new interface driver usbfs [ 0.398061] usbcore: registered new interface driver hub [ 0.398108] usbcore: registered new device driver usb [ 0.398600] mc: Linux media interface: v0.10 [ 0.398627] videodev: Linux video capture interface: v2.00 [ 0.398943] pps_core: LinuxPPS API ver. 1 registered [ 0.398956] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.398978] PTP clock support registered [ 0.399200] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.399533] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.399619] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.400430] Registered efivars operations [ 0.405375] FPGA manager framework [ 0.405474] Advanced Linux Sound Architecture Driver Initialized. [ 0.406071] Bluetooth: Core ver 2.22 [ 0.406110] NET: Registered protocol family 31 [ 0.406123] Bluetooth: HCI device and connection manager initialized [ 0.406138] Bluetooth: HCI socket layer initialized [ 0.406153] Bluetooth: L2CAP socket layer initialized [ 0.406201] Bluetooth: SCO socket layer initialized [ 0.407527] camchar: rtcpu character device driver loaded [ 0.408299] clocksource: Switched to clocksource arch_sys_counter [ 0.709987] VFS: Disk quotas dquot_6.6.0 [ 0.710104] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.710452] pnp: PnP ACPI: disabled [ 0.720579] la/ptsa driver initialized. [ 0.720735] NET: Registered protocol family 2 [ 0.720938] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.726183] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.726301] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.726568] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.727005] TCP: Hash tables configured (established 65536 bind 65536) [ 0.727132] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.727222] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.727463] NET: Registered protocol family 1 [ 0.728535] RPC: Registered named UNIX socket transport module. [ 0.728573] RPC: Registered udp transport module. [ 0.728593] RPC: Registered tcp transport module. [ 0.728612] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.728644] PCI: CLS 0 bytes, default 64 [ 0.728988] Trying to unpack rootfs image as initramfs... [ 1.004371] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.007235] Freeing initrd memory: 8196K [ 1.011483] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.011550] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.011601] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.011981] kvm [1]: IPA Size Limit: 40 bits [ 1.012685] kvm [1]: vgic interrupt IRQ9 [ 1.013157] kvm [1]: VHE mode initialized successfully [ 1.014654] Initialise system trusted keyrings [ 1.014964] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.020888] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.021703] NFS: Registering the id_resolver key type [ 1.021738] Key type id_resolver registered [ 1.021754] Key type id_legacy registered [ 1.021870] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.021895] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.021961] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.031800] NET: Registered protocol family 38 [ 1.031824] Key type asymmetric registered [ 1.031840] Asymmetric key parser 'x509' registered [ 1.031884] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.032151] io scheduler mq-deadline registered [ 1.032169] io scheduler kyber registered [ 1.038210] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.041374] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.041491] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.041569] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.041644] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.041728] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.047400] scrncapt: init (heads:4 wins:6 planes:4) [ 1.047556] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.048560] EINJ: ACPI disabled. [ 1.051726] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.051751] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.051767] tegra-pmc: ### PMC reset level: L1 [ 1.051781] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.051828] tegra-pmc: PMC Prod config success [ 1.057127] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.062688] random: fast init done [ 1.063322] printk: console [ttyTCU0] enabled [ 2.615309] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.619538] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.624146] arm-smmu 10000000.iommu: stage 1 translation [ 2.629763] arm-smmu 10000000.iommu: stage 2 translation [ 2.635007] arm-smmu 10000000.iommu: nested translation [ 2.640602] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.647779] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.658728] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.660645] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.667463] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.675071] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.680251] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.684969] arm-smmu 12000000.iommu: stage 1 translation [ 2.690734] arm-smmu 12000000.iommu: stage 2 translation [ 2.695902] arm-smmu 12000000.iommu: nested translation [ 2.701593] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.708768] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.719391] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.721894] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.728189] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.735942] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.745680] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.748617] tegra_profiler: auth: init [ 2.752882] THERMAL EST: found 3 subdevs [ 2.756545] THERMAL EST num_resources: 0 [ 2.760110] [THERMAL EST subdev 0] [ 2.763711] [THERMAL EST subdev 1] [ 2.766865] [THERMAL EST subdev 2] [ 2.770383] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.776588] THERMAL EST: thz register success. [ 2.780814] THERMAL EST: end of probe, return err: 0 [ 2.786577] nvsciipc: loaded module [ 2.793930] tun: Universal TUN/TAP device driver, 1.6 [ 2.795875] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.802139] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.807505] e1000e: Intel(R) PRO/1000 Network Driver [ 2.812625] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.818512] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.824005] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.830364] PPP generic driver version 2.4.2 [ 2.834198] PPP BSD Compression module registered [ 2.838984] PPP Deflate Compression module registered [ 2.844224] PPP MPPE Compression module registered [ 2.849035] usbcore: registered new interface driver r8152 [ 2.854793] usbcore: registered new interface driver asix [ 2.859867] usbcore: registered new interface driver ax88179_178a [ 2.866022] usbcore: registered new interface driver cdc_ether [ 2.872203] usbcore: registered new interface driver net1080 [ 2.877781] usbcore: registered new interface driver cdc_subset [ 2.883545] usbcore: registered new interface driver zaurus [ 2.889234] usbcore: registered new interface driver cdc_ncm [ 2.894912] usbcore: registered new interface driver aqc111 [ 2.900613] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.906905] ohci-pci: OHCI PCI platform driver [ 2.910935] ohci-platform: OHCI generic platform driver [ 2.916869] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.923443] usbcore: registered new interface driver uas [ 2.927487] usbcore: registered new interface driver usb-storage [ 2.933386] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.939635] mousedev: PS/2 mouse device common for all mice [ 2.944399] usbcore: registered new interface driver xpad [ 2.952659] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.955348] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.963170] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.969750] i2c /dev entries driver [ 2.973049] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.978908] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.983990] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.989615] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.994652] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.000150] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.005544] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.019147] device-mapper: uevent: version 1.0.3 [ 3.019547] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.026278] cpuidle: Initializing cpuidle driver [ 3.029923] sdhci: Secure Digital Host Controller Interface driver [ 3.034966] sdhci: Copyright(c) Pierre Ossman [ 3.038825] Synopsys Designware Multimedia Card Interface Driver [ 3.045269] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.051221] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.051980] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.064491] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.085503] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.095078] vdd-1v0: supplied by regulator-dummy [ 3.100562] vdd-1v8-hs: supplied by regulator-dummy [ 3.105401] vdd-1v8-ls: supplied by regulator-dummy [ 3.110382] vdd-1v8-ao: supplied by regulator-dummy [ 3.114500] vddio-ddr-1v1: supplied by regulator-dummy [ 3.119031] vdd-rtc: supplied by regulator-dummy [ 3.120810] spmic-ldo1: supplied by regulator-dummy [ 3.122063] vdd-ao-3v3: supplied by regulator-dummy [ 3.128358] vddio-emmc-3v3: supplied by regulator-dummy [ 3.134647] spmic-ldo4: supplied by regulator-dummy [ 3.135907] vdd-usb-3v3: supplied by regulator-dummy [ 3.142192] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.148362] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.153989] spmic-ldo8: supplied by vdd-1v8-ls [ 3.155492] gpio-510 (gpio_default): hogged as output/high [ 3.156910] gpio-511 (gpio_default): hogged as output/high [ 3.159936] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.297092] max77686-rtc max77620-rtc: registered as rtc0 [ 3.298179] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.298536] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.128248] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.129500] hid: raw HID events driver (C) Jiri Kosina [ 4.130327] usbcore: registered new interface driver usbhid [ 4.130470] usbhid: USB HID core driver [ 4.132627] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.134009] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.214371] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.288565] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.004 ms) ÿá[ 4.218316] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.219010] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.220112] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.220892] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.222696] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.223411] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.224175] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.225686] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.225955] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.228772] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.235064] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.241521] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.246492] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.252329] denver_knobs_init:MTS_VERSION:55637613 [ 4.264152] t19x_cache tegra-cache: probed [ 4.267430] optee: probing for conduit method. [ 4.268256] optee: revision 3.16 (65cc2218) [ 4.269358] optee: dynamic shared memory is enabled [ 4.273162] optee: initialized driver [ 4.279444] nvpmodel: initialized successfully [ 4.281070] tegra_hv: get_hvd: not initialized yet [ 4.285352] user_ivc_mempool: hypervisor not present [ 4.291662] usbcore: registered new interface driver snd-usb-audio [ 4.297807] u32 classifier [ 4.299130] input device check on [ 4.302916] Actions configured [ 4.306833] Initializing XFRM netlink socket [ 4.311616] NET: Registered protocol family 10 [ 4.317777] Segment Routing with IPv6 [ 4.318986] NET: Registered protocol family 17 [ 4.323078] NET: Registered protocol family 15 [ 4.327791] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.340854] Bluetooth: RFCOMM socket layer initialized [ 4.345666] Bluetooth: RFCOMM ver 1.11 [ 4.349816] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.355439] Bluetooth: HIDP socket layer initialized [ 4.361489] 9pnet: Installing 9P2000 support [ 4.365149] Key type dns_resolver registered [ 4.370421] registered taskstats version 1 [ 4.373608] Loading compiled-in X.509 certificates [ 4.386937] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.389385] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.399549] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.401530] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.409790] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.418430] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.536390] tegra194-pcie 14160000.pcie: Link up [ 4.539301] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.539553] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.539768] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.540026] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.540311] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.540659] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.541184] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.553936] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.554459] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.554925] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.556575] pci 0004:01:00.0: supports D1 D2 [ 4.556702] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.570131] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.570727] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.571001] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.571454] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.571733] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.572024] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.572256] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.578635] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.586860] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.597743] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.601961] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.607240] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.614168] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.624103] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.625137] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.633521] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.641728] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.751861] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.752603] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.752856] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.753066] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.753340] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.753560] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.753930] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.754448] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.777579] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.777945] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.779835] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.781333] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.782435] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.784494] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.785431] pci 0005:00:00.0: Removing from iommu group 7 [ 5.785932] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.823477] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.847905] host1x 13e10000.host1x: initialized [ 5.849651] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.850496] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.851575] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.852422] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.853453] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.854050] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.855259] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.855987] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.857139] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.857848] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.862185] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.868911] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.878728] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.885988] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.895682] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.903025] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.912964] falcon 15340000.vic: Adding to iommu group 17 [ 5.927558] falcon 15340000.vic: initialized [ 5.928704] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.934451] falcon 15380000.nvjpg: initialized [ 5.935139] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.946120] falcon 154c0000.nvenc: initialized [ 5.946683] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.955777] falcon 15a80000.nvenc1: initialized [ 5.956568] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.969356] nvdec 15480000.nvdec: initialized [ 5.970114] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.981408] nvdec 15140000.nvdec1: initialized [ 5.982345] tsec 15500000.tsec: Adding to iommu group 18 [ 5.988807] tsec 15500000.tsec: initialized [ 5.989686] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.995559] tsec 15100000.tsecb: initialized [ 6.000249] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.029223] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.042270] gpio-374 (wifi-enable): hogged as output/high [ 6.042560] gpio-431 (camera-control-output-low): hogged as output/low [ 6.042851] gpio-432 (camera-control-output-low): hogged as output/low [ 6.044413] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.045716] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.046202] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.047666] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.049382] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.055116] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.060876] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.069627] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.076693] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.088093] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.093316] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.099177] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.108031] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.117027] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.124100] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.131950] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.138346] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.147631] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.153977] pva 16000000.pva0: Adding to iommu group 22 [ 6.182221] pva 16000000.pva0: initialized [ 6.186852] pva 16800000.pva1: Adding to iommu group 23 [ 6.198538] pva 16800000.pva1: initialized [ 6.202783] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.217292] nvdla 15880000.nvdla0: initialized [ 6.218920] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.228219] nvdla 158c0000.nvdla1: initialized [ 6.231807] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.232021] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.232142] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.232783] random: crng init done [ 6.232805] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.233344] tegradccommon 15200000.display-hub: dma mapping done [ 6.233522] tegradc 15210000.display: Adding to iommu group 26 [ 6.233581] tegradc 15200000.display: Adding to iommu group 26 [ 6.233595] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.235388] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.242164] tegradc 15210000.display: disp0 connected to head1->sor [ 6.247021] tegra_cec 3960000.tegra_cec: probed [ 6.252878] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.259651] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.263725] tegradc 15210000.display: DT parsed successfully [ 6.271182] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.276536] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.277908] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.284277] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.288915] generic_infoframe_type: 0x87 [ 6.296915] kfuse 3830000.kfuse: initialized [ 6.302387] tegradc 15200000.display: DT parsed successfully [ 6.309556] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.313302] tegradc 15200000.display: Display dc.000000000adec993 registered with id=0 [ 6.317313] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.317924] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.326994] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.330783] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.337550] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.337557] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.338443] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.345860] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.350057] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.351470] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.359034] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.370784] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.376638] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.385055] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.390319] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.463304] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.463726] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.465534] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.473588] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.482160] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.488876] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.496198] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.503519] usb usb1: Product: xHCI Host Controller [ 6.508583] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.514867] usb usb1: SerialNumber: 3610000.xhci [ 6.520463] hub 1-0:1.0: USB hub found [ 6.523142] hub 1-0:1.0: 4 ports detected [ 6.527792] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.532858] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.540179] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.547934] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.556060] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.563256] usb usb2: Product: xHCI Host Controller [ 6.567981] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.574210] usb usb2: SerialNumber: 3610000.xhci [ 6.579500] hub 2-0:1.0: USB hub found [ 6.583012] hub 2-0:1.0: 4 ports detected [ 6.627498] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.633921] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.635471] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.635660] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.649038] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.650257] tegra194-cpufreq ccplex: probed with BWMGR [ 6.651998] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.652849] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.653394] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.654700] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.660700] tegra194-vi5 15c10000.vi: initialized [ 6.661946] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.663078] generic_infoframe_type: 0x87 [ 6.664121] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.666822] tegradc 15200000.display: DT parsed successfully [ 6.673262] mmc0: CQHCI version 5.10 [ 6.678775] tegradc 15200000.display: Display dc.00000000951ad4f1 registered with id=0 [ 6.680532] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.680558] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.680565] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.680569] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.680574] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.688352] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.691286] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.698569] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.704823] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.704831] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.710931] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.711732] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.718400] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.726169] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.731086] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.746208] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.763386] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.770178] nvethernet 2490000.ethernet: Macsec not supported [ 6.776828] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.779622] tegradc 15200000.display: probed [ 6.785648] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.790599] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.793363] mmc0: Command Queue Engine enabled [ 6.798352] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.807589] mmc0: periodic cache flush enabled [ 6.815338] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.821158] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.828929] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.834000] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.842815] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.848199] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.901361] tegra-se-nvhost 15810000.se: initialized [ 6.901371] Console: switching to colour frame buffer device 240x67 [ 6.906883] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.912106] tegradc 15200000.display: fb registered [ 6.912181] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.916344] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.918867] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.924153] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.929833] tegra-se-nvhost 15820000.se: initialized [ 6.937111] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.945151] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.966439] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.973230] tegra-se-nvhost 15830000.se: initialized [ 6.978427] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.984384] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.990448] tegra-se-nvhost 15840000.se: initialized [ 6.995904] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.996515] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.002941] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.002947] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.002957] usb 1-2: Manufacturer: Generic [ 7.004530] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.005590] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.005601] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.006174] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.006178] Extcon AUX1(HDMI) enable [ 7.006281] tegradc 15210000.display: disp1 connected to head1->sor [ 7.006444] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.006499] tegradc 15210000.display: DT parsed successfully [ 7.006533] tegradc 15210000.display: Display dc.00000000197f871d registered with id=1 [ 7.006647] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.006653] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.010712] tegra_actmon d230000.actmon: in actmon_register()... [ 7.013705] tegradc 15210000.display: probed [ 7.018975] hub 1-2:1.0: USB hub found [ 7.021570] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.026694] hub 1-2:1.0: 4 ports detected [ 7.034424] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.121181] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.124423] hvc_sysfs: hypervisor is not present ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.144016] tegradc 15210000.display: fb registered [ 7.144120] tegradc 15200000.display: blank - powerdown [ 7.147402] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.147407] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.147434] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.165882] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.165888] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.165892] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.165896] usb 2-3: Manufacturer: Generic [ 7.170931] ALSA device list: [ 7.170938] No soundcards found. [ 7.176653] hub 2-3:1.0: USB hub found [ 7.178517] hub 2-3:1.0: 4 ports detected [ 7.188215] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.188220] Extcon AUX1(HDMI) disable [ 7.211550] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.212416] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.224336] tegradc 15200000.display: unblank [ 7.225415] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.225609] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.231470] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.233311] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.237256] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.237260] Extcon AUX1(HDMI) enable [ 7.250060] tegradc 15200000.display: sync windows ret = 247 [ 7.284360] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.296321] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.312326] tegradc 15210000.display: blank - powerdown [ 7.317447] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.317450] Extcon DP: HPD disabled [ 7.317454] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.317468] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.342264] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.348940] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.349869] Freeing unused kernel memory: 3968K [ 7.356212] Extcon HDMI: HPD enabled [ 7.360854] Run /init as init process [ 7.364694] tegradc 15200000.display: hdmi: plugged [ 7.368312] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.379806] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.437023] Root device found: mmcblk0p1 [ 7.440368] Found dev node: /dev/mmcblk0p1 [ 7.449528] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.450869] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.452156] usb 1-3: Product: Bluetooth Radio [ 7.453389] usb 1-3: Manufacturer: Realtek [ 7.454579] usb 1-3: SerialNumber: 00e04c000001 [ 7.477175] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.482668] Rootfs mounted over mmcblk0p1 [ 7.520365] Switching from initrd to actual rootfs [ 7.663871] systemd[1]: System time before build time, advancing clock. [ 7.733903] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.738697] systemd[1]: Detected architecture arm64. [ 7.787169] systemd[1]: Set hostname to . [ 7.958224] systemd-sysv-generator[260]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.304981] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.306674] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.312505] systemd[1]: Created slice system-modprobe.slice. [ 8.317093] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.321100] systemd[1]: Created slice User and Session Slice. [ 8.324395] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.328450] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.331619] systemd[1]: Reached target User and Group Name Lookups. [ 8.334784] systemd[1]: Reached target Slices. [ 8.337647] systemd[1]: Reached target Swap. [ 8.341452] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.345402] systemd[1]: Listening on Syslog Socket. [ 8.350599] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.355567] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.361509] systemd[1]: Listening on Journal Audit Socket. [ 8.367544] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.373793] systemd[1]: Listening on Journal Socket. [ 8.379573] systemd[1]: Listening on udev Control Socket. [ 8.382953] systemd[1]: Listening on udev Kernel Socket. [ 8.391288] systemd[1]: Mounting Huge Pages File System... [ 8.399715] systemd[1]: Mounting POSIX Message Queue File System... [ 8.407895] systemd[1]: Mounting RPC Pipe File System... [ 8.416219] systemd[1]: Mounting Kernel Debug File System... [ 8.425092] systemd[1]: Mounting Kernel Trace File System... [ 8.435433] systemd[1]: Starting Journal Service... [ 8.444543] systemd[1]: Starting Set the console keyboard layout... [ 8.452869] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.456367] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.462990] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.470958] systemd[1]: Started Nameserver information manager. [ 8.474865] systemd[1]: Reached target Network (Pre). [ 8.481761] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.483457] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.491730] systemd[1]: Starting Load Kernel Modules... [ 8.499318] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.509357] systemd[1]: Starting udev Coldplug all Devices... [ 8.519311] systemd[1]: Mounted Huge Pages File System. [ 8.522905] systemd[1]: Mounted POSIX Message Queue File System. [ 8.526399] systemd[1]: Mounted RPC Pipe File System. [ 8.531042] systemd[1]: Mounted Kernel Debug File System. [ 8.531509] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.533743] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.536177] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.536184] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.536194] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.536198] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.536438] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.536648] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.536806] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.546338] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.551123] systemd[1]: Mounted Kernel Trace File System. [ 8.557297] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.562932] systemd[1]: nvfb-udev.service: Succeeded. [ 8.566927] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.576772] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.581603] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.583217] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.598094] systemd[1]: Starting Load/Save Random Seed... [ 8.605445] systemd[1]: Starting Create System Users... [ 8.644846] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.644846] [ 8.654676] systemd[1]: Finished Load/Save Random Seed. [ 8.666983] systemd[1]: Finished Create System Users. [ 8.675090] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.690693] systemd[1]: Finished Load Kernel Modules. [ 8.695019] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.702865] systemd[1]: Mounting Kernel Configuration File System... [ 8.712350] systemd[1]: Started OP-TEE Client Supplicant. [ 8.721147] systemd[1]: Starting Apply Kernel Variables... [ 8.731929] systemd[1]: Finished Set the console keyboard layout. [ 8.738451] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.742346] systemd[1]: Mounted Kernel Configuration File System. [ 8.746213] systemd[1]: Reached target Local File Systems (Pre). [ 8.749142] systemd[1]: Reached target Local File Systems. [ 8.752207] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 8.758704] systemd[1]: Starting Enable support for additional executable binary formats... [ 10.251888] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.258551] imx219 9-0010: board setup failed [ 10.259811] imx219: probe of 9-0010 failed with error -121 [ 10.271664] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.278076] imx219 10-0010: board setup failed [ 10.279277] imx219: probe of 10-0010 failed with error -121 [ 10.348605] hot-surface-alert cooling state: 0 -> 1 [ 10.961028] using random self ethernet address [ 10.962238] using random host ethernet address [ 11.942435] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.942441] Creating 1 MTD partitions on "spi6.0": [ 11.942451] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.327920] using random self ethernet address [ 12.329116] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.832940] nvidia: loading out-of-tree module taints kernel. [ 59.434074] watchdog: watchdog0: watchdog did not stop! [ 59.944051] Trying to unregister non-registered hwtime source [ 63.008456] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.010608] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 clk_early initialized ÿäI/TCÿâmail_early initialized ÿä: ÿâfuse initialized hwwdt initialized ÿäNon-ÿât194_ec_get_ec_list: found 45 ecs ÿäsecure exteÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿärnalÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä DT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thuÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿäAÿâpm_post initialized dbells initialized ÿäug ÿâdmce initialized cvc initialized ÿä11 03:23:20 Uÿâavfs_clk_mach_post initialized ÿäTC 2ÿâavfs_clk_platform_post initialized ÿä022ÿâcvc_late initialized regulator_post initialized ÿä aarÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäch64 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.203] I> Welcome to NVDisp-Init [0003.203] I> NVDisp-Init version: t194-f9ecfedc [0003.203] I> CPU-BL Params @ 0xca020000 [0003.204] I> 0) Base:0x00000000 Size:0x00000000 [0003.204] I> 1) Base:0xc8300000 Size:0x00100000 [0003.204] I> 2) Base:0xc9800000 Size:0x00200000 [0003.205] I> 3) Base:0xc8600000 Size:0x00200000 [0003.207] I> 4) Base:0xc8200000 Size:0x00100000 [0003.212] I> 5) Base:0xc8100000 Size:0x00100000 [0003.216] I> 6) Base:0xc9400000 Size:0x00400000 [0003.220] I> 7) Base:0xc9000000 Size:0x00400000 [0003.225] I> 8) Base:0xc8000000 Size:0x00100000 [0003.229] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.234] I> 10) Base:0xca800000 Size:0x00800000 [0003.238] I> 11) Base:0x40000000 Size:0x00040000 [0003.243] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.247] I> 13) Base:0x40046000 Size:0x00002000 [0003.252] I> 14) Base:0x40048000 Size:0x00002000 [0003.256] I> 15) Base:0xaf000000 Size:0x00004000 [0003.261] I> 16) Base:0x4004a000 Size:0x00002000 [0003.265] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.270] I> 18) Base:0x4004c000 Size:0x00002000 [0003.274] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.278] I> 20) Base:0x4004e000 Size:0x00002000 [0003.283] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.287] I> 22) Base:0x00000000 Size:0x00000000 [0003.292] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.296] I> 24) Base:0xcc000000 Size:0x02000000 [0003.301] I> 25) Base:0x40050000 Size:0x00002000 [0003.305] I> 26) Base:0x40040000 Size:0x00006000 [0003.310] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.314] I> 28) Base:0xc8400000 Size:0x00200000 [0003.319] I> 29) Base:0xc8800000 Size:0x00400000 [0003.323] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.328] I> 31) Base:0x00000000 Size:0x00000000 [0003.332] I> 32) Base:0xf8000000 Size:0x08000000 [0003.336] I> 33) Base:0xce000000 Size:0x2a000000 [0003.341] I> 34) Base:0xcb000000 Size:0x01000000 [0003.345] I> 35) Base:0xae000000 Size:0x01000000 [0003.350] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.354] I> 37) Base:0xca000000 Size:0x00800000 [0003.359] I> 38) Base:0x80000000 Size:0x20000000 [0003.363] I> 39) Base:0xb0000000 Size:0x08000000 [0003.368] I> 40) Base:0x00000000 Size:0x00000000 [0003.372] I> 41) Base:0x00000000 Size:0x00000000 [0003.377] I> 42) Base:0x00000000 Size:0x00000000 [0003.381] I> 43) Base:0x00000000 Size:0x00000000 [0003.386] I> 44) Base:0x00000000 Size:0x00000000 [0003.390] I> 45) Base:0x00000000 Size:0x00000000 [0003.394] GIC-SPI Target CPU: 0 [0003.397] Interrupts Init done [0003.400] calling constructors [0003.403] initializing heap [0003.406] I> Heap: [0xa0960000 ... 0xadf00000] [0003.410] initializing threads [0003.413] initializing timers [0003.416] creating bootstrap completion thread [0003.420] top of bootstrap2() [0003.423] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.428] initializing platform [0003.431] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.436] W> device prod register failed [0003.440] I> Bl_dtb @0xadf00000 [0003.443] I> gpio framework initialized [0003.454] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.465] I> fixed regulator driver initialized [0003.477] I> register 'maxim' power off handle [0003.479] I> virtual i2c enabled [0003.479] I> registered 'maxim,max20024' pmic [0003.479] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.484] I> Boot-device: QSPI [0003.487] I> Boot_device: QSPI_FLASH instance: 0 [0003.491] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.502] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.509] I> QSPI source rate = 204000 Khz [0003.512] I> Requested rate for QSPI clock = 34000 Khz [0003.518] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.522] I> tx_clk_tap_delay : 0 [0003.525] I> rx_clk_tap_delay : 16 [0003.528] I> QSPI Flash Size = 32 MB [0003.536] I> Qspi initialized successfully [0003.537] I> qspi flash-0 params source = boot args [0003.541] W> No board IDs available [0003.544] E> Failed to get board id info! [0003.550] I> sdmmc-3 params source = safe params [0003.557] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.558] W> Cannot find any partition table for 00000003 [0003.563] E> Failed to publish 00000003 [0003.567] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.585] I> regulator 'vdd-hdmi-5v0' already enabled [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.590] I> hdmi cable connected [0003.594] W> set volts not configured for 'vdd-1v0' [0003.598] W> set volts not configured for 'vdd-1v8-hs' [0003.599] I> retrieved tmds range from prod_list_hdmi_soc [0003.605] E> invalid display type [0003.605] E> cannot find any other nvdisp nodes [0003.623] I> edid read success [0003.635] I> edid read success [0003.636] I> width = 640, height = 480, frequency = 25174825 [0003.636] I> width = 1920, height = 1080, frequency = 148500000 [0003.637] I> width = 1280, height = 768, frequency = 79500000 [0003.637] I> width = 1360, height = 768, frequency = 85500000 [0003.637] I> width = 720, height = 480, frequency = 26973026 [0003.641] I> width = 720, height = 576, frequency = 26973026 [0003.647] I> width = 1280, height = 720, frequency = 74175824 [0003.652] I> width = 1280, height = 720, frequency = 74175824 [0003.658] I> width = 1920, height = 1080, frequency = 148351648 [0003.664] I> width = 1920, height = 1080, frequency = 148351648 [0003.670] I> width = 720, height = 480, frequency = 26973026 [0003.675] I> width = 720, height = 576, frequency = 26973026 [0003.681] I> width = 3840, height = 2160, frequency = 296703296 [0003.686] I> width = 3840, height = 2160, frequency = 296703296 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 4096, height = 2160, frequency = 296703296 [0003.709] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.721] I> hdmi_enable, starting HDMI initialisation [0003.726] I> hdmi_enable, HDMI initialisation complete [0003.735] initializing target [0003.736] calling apps_init() [0003.737] starting app kernel_boot_app [0003.738] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000021] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000707] Console: colour dummy device 80x25 [ 0.002129] printk: console [tty0] enabled [ 0.002194] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002228] pid_max: default: 32768 minimum: 301 [ 0.002400] LSM: Security Framework initializing [ 0.002457] Yama: becoming mindful. [ 0.002499] SELinux: Initializing. [ 0.002644] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002702] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005804] rcu: Hierarchical SRCU implementation. [ 0.006123] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006820] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006882] DTB Build time: Aug 10 2022 20:31:49 [ 0.009594] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009883] Remapping and enabling EFI services. [ 0.011818] smp: Bringing up secondary CPUs ... [ 0.041946] Detected PIPT I-cache on CPU1 [ 0.042027] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071737] Detected PIPT I-cache on CPU2 [ 0.071835] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101430] Detected PIPT I-cache on CPU3 [ 0.101497] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131181] Detected PIPT I-cache on CPU4 [ 0.131284] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160928] Detected PIPT I-cache on CPU5 [ 0.161021] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161371] smp: Brought up 1 node, 6 CPUs [ 0.161702] SMP: Total of 6 processors activated. [ 0.161766] CPU features: detected: Privileged Access Never [ 0.161798] CPU features: detected: LSE atomic instructions [ 0.161821] CPU features: detected: User Access Override [ 0.161845] CPU features: detected: 32-bit EL0 Support [ 0.161867] CPU features: detected: RAS Extension Support [ 0.161888] CPU features: detected: CRC32 instructions [ 0.161909] CPU features: detected: 32-bit EL1 Support [ 0.226836] CPU: All CPU(s) started at EL2 [ 0.232174] devtmpfs: initialized [ 0.281683] Registered cp15_barrier emulation handler [ 0.281882] Registered setend emulation handler [ 0.281904] KASLR enabled [ 0.282149] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.282199] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.283577] pinctrl core: initialized pinctrl subsystem [ 0.284462] SMBIOS 3.0.0 present. [ 0.284507] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.285115] NET: Registered protocol family 16 [ 0.287408] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.287935] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.288674] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.288737] audit: initializing netlink subsys (disabled) [ 0.289009] audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1 [ 0.289403] thermal_sys: Registered thermal governor 'step_wise' [ 0.289409] thermal_sys: Registered thermal governor 'power_allocator' [ 0.289424] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.291582] cpuidle: using governor menu [ 0.291951] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.292343] ASID allocator initialised with 32768 entries [ 0.292555] Serial: AMBA PL011 UART driver [ 0.295889] Tegra reboot handler registered. [ 0.366006] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.366176] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.366396] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.366449] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.366582] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.366630] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.366752] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.366800] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.366959] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.367005] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.369573] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.369615] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.369648] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.369680] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.369714] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.369745] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.369788] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.369825] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.369866] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.369895] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.369923] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.369951] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.369979] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.370010] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.370040] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.370068] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.370096] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.370221] mc-err: mcerr ops are set to t19x [ 0.383140] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.383165] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.383178] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.383191] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.390335] ACPI: Interpreter disabled. [ 0.391620] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.392979] iommu: Default domain type: Translated [ 0.393053] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.393470] SCSI subsystem initialized [ 0.393646] usbcore: registered new interface driver usbfs [ 0.393690] usbcore: registered new interface driver hub [ 0.393724] usbcore: registered new device driver usb [ 0.394180] mc: Linux media interface: v0.10 [ 0.394210] videodev: Linux video capture interface: v2.00 [ 0.394521] pps_core: LinuxPPS API ver. 1 registered [ 0.394533] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.394675] PTP clock support registered [ 0.394898] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.395200] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.395283] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.395951] Registered efivars operations [ 0.401428] FPGA manager framework [ 0.401538] Advanced Linux Sound Architecture Driver Initialized. [ 0.402136] Bluetooth: Core ver 2.22 [ 0.402189] NET: Registered protocol family 31 [ 0.402221] Bluetooth: HCI device and connection manager initialized [ 0.402237] Bluetooth: HCI socket layer initialized [ 0.402254] Bluetooth: L2CAP socket layer initialized [ 0.402276] Bluetooth: SCO socket layer initialized [ 0.403869] camchar: rtcpu character device driver loaded [ 0.404619] clocksource: Switched to clocksource arch_sys_counter [ 0.701734] VFS: Disk quotas dquot_6.6.0 [ 0.701810] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.702154] pnp: PnP ACPI: disabled [ 0.713928] la/ptsa driver initialized. [ 0.714060] NET: Registered protocol family 2 [ 0.714243] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.720448] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.720516] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.720861] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.721298] TCP: Hash tables configured (established 65536 bind 65536) [ 0.721432] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.721524] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.721741] NET: Registered protocol family 1 [ 0.722502] RPC: Registered named UNIX socket transport module. [ 0.722517] RPC: Registered udp transport module. [ 0.722527] RPC: Registered tcp transport module. [ 0.722537] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.722553] PCI: CLS 0 bytes, default 64 [ 0.722753] Trying to unpack rootfs image as initramfs... [ 0.907288] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.909531] Freeing initrd memory: 8196K [ 0.913494] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.913531] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.913581] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.913960] kvm [1]: IPA Size Limit: 40 bits [ 0.914388] kvm [1]: vgic interrupt IRQ9 [ 0.914850] kvm [1]: VHE mode initialized successfully [ 0.916370] Initialise system trusted keyrings [ 0.916748] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.923028] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.923837] NFS: Registering the id_resolver key type [ 0.923871] Key type id_resolver registered [ 0.923887] Key type id_legacy registered [ 0.923977] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.924001] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.924039] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.933661] NET: Registered protocol family 38 [ 0.933684] Key type asymmetric registered [ 0.933699] Asymmetric key parser 'x509' registered [ 0.933774] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.933996] io scheduler mq-deadline registered [ 0.934015] io scheduler kyber registered [ 0.940061] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.943230] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.943310] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.943389] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.943473] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.943549] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.948914] scrncapt: init (heads:4 wins:6 planes:4) [ 0.949094] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.950094] EINJ: ACPI disabled. [ 0.953430] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.953457] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.953471] tegra-pmc: ### PMC reset level: L1 [ 0.953485] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.953538] tegra-pmc: PMC Prod config success [ 0.958823] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.963991] random: fast init done [ 0.964691] printk: console [ttyTCU0] enabled [ 2.516872] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.521031] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.525642] arm-smmu 10000000.iommu: stage 1 translation [ 2.530960] arm-smmu 10000000.iommu: stage 2 translation [ 2.536360] arm-smmu 10000000.iommu: nested translation [ 2.541674] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.548847] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.559852] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.561974] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.568786] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.576488] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.581571] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.586294] arm-smmu 12000000.iommu: stage 1 translation [ 2.592061] arm-smmu 12000000.iommu: stage 2 translation [ 2.597228] arm-smmu 12000000.iommu: nested translation [ 2.602956] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.610104] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.620652] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.622935] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.629802] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.637046] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.646932] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.650191] tegra_profiler: auth: init [ 2.654468] THERMAL EST: found 3 subdevs [ 2.657614] THERMAL EST num_resources: 0 [ 2.661740] [THERMAL EST subdev 0] [ 2.664781] [THERMAL EST subdev 1] [ 2.668430] [THERMAL EST subdev 2] [ 2.671434] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.677918] THERMAL EST: thz register success. [ 2.682151] THERMAL EST: end of probe, return err: 0 [ 2.687694] nvsciipc: loaded module [ 2.694751] tun: Universal TUN/TAP device driver, 1.6 [ 2.697026] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.703191] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.709020] e1000e: Intel(R) PRO/1000 Network Driver [ 2.713974] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.719776] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.725325] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.731555] PPP generic driver version 2.4.2 [ 2.735758] PPP BSD Compression module registered [ 2.740304] PPP Deflate Compression module registered [ 2.745549] PPP MPPE Compression module registered [ 2.750567] usbcore: registered new interface driver r8152 [ 2.755824] usbcore: registered new interface driver asix [ 2.761152] usbcore: registered new interface driver ax88179_178a [ 2.767531] usbcore: registered new interface driver cdc_ether [ 2.773251] usbcore: registered new interface driver net1080 [ 2.778819] usbcore: registered new interface driver cdc_subset [ 2.785116] usbcore: registered new interface driver zaurus [ 2.790816] usbcore: registered new interface driver cdc_ncm [ 2.796489] usbcore: registered new interface driver aqc111 [ 2.802159] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.807970] ohci-pci: OHCI PCI platform driver [ 2.812533] ohci-platform: OHCI generic platform driver [ 2.818519] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.824536] usbcore: registered new interface driver uas [ 2.828549] usbcore: registered new interface driver usb-storage [ 2.834696] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.840821] mousedev: PS/2 mouse device common for all mice [ 2.845955] usbcore: registered new interface driver xpad [ 2.853691] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.856409] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.864490] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.871031] i2c /dev entries driver [ 2.874131] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.880154] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.885538] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.890691] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.896241] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.901736] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.906876] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.920518] device-mapper: uevent: version 1.0.3 [ 2.921133] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.927624] cpuidle: Initializing cpuidle driver [ 2.931361] sdhci: Secure Digital Host Controller Interface driver [ 2.936058] sdhci: Copyright(c) Pierre Ossman [ 2.940167] Synopsys Designware Multimedia Card Interface Driver [ 2.946347] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.952350] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.953206] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.965865] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.987931] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.997471] vdd-1v0: supplied by regulator-dummy [ 3.002932] vdd-1v8-hs: supplied by regulator-dummy [ 3.007828] vdd-1v8-ls: supplied by regulator-dummy [ 3.012751] vdd-1v8-ao: supplied by regulator-dummy [ 3.016725] vddio-ddr-1v1: supplied by regulator-dummy [ 3.021197] vdd-rtc: supplied by regulator-dummy [ 3.023009] spmic-ldo1: supplied by regulator-dummy [ 3.024281] vdd-ao-3v3: supplied by regulator-dummy [ 3.030449] vddio-emmc-3v3: supplied by regulator-dummy [ 3.036854] spmic-ldo4: supplied by regulator-dummy [ 3.038058] vdd-usb-3v3: supplied by regulator-dummy [ 3.044251] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.050553] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.056100] spmic-ldo8: supplied by vdd-1v8-ls [ 3.057567] gpio-510 (gpio_default): hogged as output/high [ 3.058911] gpio-511 (gpio_default): hogged as output/high [ 3.061984] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.198683] max77686-rtc max77620-rtc: registered as rtc0 [ 3.200048] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.200366] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.053503] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.054625] hid: raw HID events driver (C) Jiri Kosina [ 4.055454] usbcore: registered new interface driver usbhid [ 4.055603] usbhid: USB HID core driver [ 4.057769] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.059102] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.054665] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.129073] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.217 ms) ÿá[ 4.143586] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.144124] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.145231] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.145988] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.147739] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.148446] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.149072] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.150269] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.150516] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.153056] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.160118] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.166166] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.171490] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.177568] denver_knobs_init:MTS_VERSION:55637613 [ 4.189614] t19x_cache tegra-cache: probed [ 4.192960] optee: probing for conduit method. [ 4.193820] optee: revision 3.16 (65cc2218) [ 4.194780] optee: dynamic shared memory is enabled [ 4.198403] optee: initialized driver [ 4.206533] nvpmodel: initialized successfully [ 4.207372] tegra_hv: get_hvd: not initialized yet [ 4.210698] user_ivc_mempool: hypervisor not present [ 4.217588] usbcore: registered new interface driver snd-usb-audio [ 4.223456] u32 classifier [ 4.224335] input device check on [ 4.228159] Actions configured [ 4.232014] Initializing XFRM netlink socket [ 4.236886] NET: Registered protocol family 10 [ 4.243023] Segment Routing with IPv6 [ 4.244192] NET: Registered protocol family 17 [ 4.248205] NET: Registered protocol family 15 [ 4.252859] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.266061] Bluetooth: RFCOMM socket layer initialized [ 4.270904] Bluetooth: RFCOMM ver 1.11 [ 4.275079] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.280661] Bluetooth: HIDP socket layer initialized [ 4.286547] 9pnet: Installing 9P2000 support [ 4.290083] Key type dns_resolver registered [ 4.295767] registered taskstats version 1 [ 4.298561] Loading compiled-in X.509 certificates [ 4.312070] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.314443] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.324591] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.326484] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.335260] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.343377] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.460733] tegra194-pcie 14160000.pcie: Link up [ 4.463801] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.464046] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.464247] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.464490] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.464734] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.465093] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.465590] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.478656] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.479223] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.479724] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.481393] pci 0004:01:00.0: supports D1 D2 [ 4.481575] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.493940] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.494385] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.494798] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.495260] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.495636] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.495836] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.496042] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.502991] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.511194] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.521584] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.526274] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.531644] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.538814] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.548136] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.549437] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.557609] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.566383] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.681557] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.682240] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.682425] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.682585] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.682894] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.683126] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.683484] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.683970] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.707230] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.707503] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.709418] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.710700] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.712531] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.714177] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.715283] pci 0005:00:00.0: Removing from iommu group 7 [ 5.715730] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.753870] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.778637] host1x 13e10000.host1x: initialized [ 5.780194] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.781173] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.782374] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.783080] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.784236] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.785153] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.786289] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.786908] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.787850] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.788428] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.791656] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.798416] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.808411] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.815691] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.825582] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.832296] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.842501] falcon 15340000.vic: Adding to iommu group 17 [ 5.856880] falcon 15340000.vic: initialized [ 5.858221] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.863935] falcon 15380000.nvjpg: initialized [ 5.864579] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.876261] falcon 154c0000.nvenc: initialized [ 5.876912] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.886396] falcon 15a80000.nvenc1: initialized [ 5.886918] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.898162] nvdec 15480000.nvdec: initialized [ 5.898765] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.908277] nvdec 15140000.nvdec1: initialized [ 5.909260] tsec 15500000.tsec: Adding to iommu group 18 [ 5.915048] tsec 15500000.tsec: initialized [ 5.915725] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.923805] tsec 15100000.tsecb: initialized [ 5.928678] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.957225] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.970610] gpio-374 (wifi-enable): hogged as output/high [ 5.970919] gpio-431 (camera-control-output-low): hogged as output/low [ 5.971379] gpio-432 (camera-control-output-low): hogged as output/low [ 5.973062] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.975099] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.975717] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.977232] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.978942] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.984994] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.990599] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.998871] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.005951] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.018180] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.023013] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.028854] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.037710] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.046720] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.054828] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.061683] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.067808] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.077643] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.083929] pva 16000000.pva0: Adding to iommu group 22 [ 6.110632] pva 16000000.pva0: initialized [ 6.115262] pva 16800000.pva1: Adding to iommu group 23 [ 6.127310] pva 16800000.pva1: initialized [ 6.131032] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.144403] nvdla 15880000.nvdla0: initialized [ 6.146001] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.162672] nvdla 158c0000.nvdla1: initialized [ 6.167117] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.167608] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.167636] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.168112] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.168417] tegradc 15210000.display: Adding to iommu group 26 [ 6.169416] tegradccommon 15200000.display-hub: dma mapping done [ 6.170152] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.171524] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.173709] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.175256] tegradc 15200000.display: Adding to iommu group 26 [ 6.175266] tegradc 15210000.display: disp0 connected to head1->sor [ 6.175367] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.175519] tegradc 15210000.display: DT parsed successfully [ 6.175534] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.178773] tegra_cec 3960000.tegra_cec: probed [ 6.179674] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.186114] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.200343] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.204307] generic_infoframe_type: 0x87 [ 6.212102] kfuse 3830000.kfuse: initialized [ 6.216467] tegradc 15200000.display: DT parsed successfully [ 6.222571] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.228910] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.235602] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.236358] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.243666] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.255882] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.263900] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.272020] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.276437] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.301792] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.309087] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.316574] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.324414] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.326068] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.342823] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.357587] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.371286] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.382638] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.385950] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.391560] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.399763] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.408781] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.415194] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.422494] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.425757] random: crng init done [ 6.429704] usb usb1: Product: xHCI Host Controller [ 6.438166] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.444367] usb usb1: SerialNumber: 3610000.xhci [ 6.450148] hub 1-0:1.0: USB hub found [ 6.452714] hub 1-0:1.0: 4 ports detected [ 6.457751] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.462484] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.470154] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.477693] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.485662] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.492909] usb usb2: Product: xHCI Host Controller [ 6.497549] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.503868] usb usb2: SerialNumber: 3610000.xhci [ 6.509671] hub 2-0:1.0: USB hub found [ 6.512543] hub 2-0:1.0: 4 ports detected [ 6.555746] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.561986] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.563556] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.563774] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.577333] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.578445] tegra194-cpufreq ccplex: probed with BWMGR [ 6.579807] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.580291] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.580854] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.582185] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.589154] tegra194-vi5 15c10000.vi: initialized [ 6.590699] tegradc 15210000.display: disp0 connected to head1->sor [ 6.590721] mmc0: CQHCI version 5.10 [ 6.591902] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.592104] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.592109] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.592117] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.592121] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.592126] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.592592] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.600708] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.602153] tegradc 15210000.display: DT parsed successfully [ 6.610249] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.616638] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.623410] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.624917] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.630150] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.638097] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.643767] generic_infoframe_type: 0x87 [ 6.655874] tegradc 15200000.display: DT parsed successfully [ 6.662822] nvethernet 2490000.ethernet: Macsec not supported [ 6.670545] tegradc 15200000.display: Display dc.000000007254ba39 registered with id=0 [ 6.678907] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.685872] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.692509] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.698955] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.698959] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.699305] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.703188] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.708593] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.710591] mmc0: Command Queue Engine enabled [ 6.710596] mmc0: periodic cache flush enabled [ 6.710610] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.711211] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.711371] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.714486] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.715183] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.716662] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.722760] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.731696] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.740009] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.745828] tegra-se-nvhost 15810000.se: initialized [ 6.752619] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.765823] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.768983] tegradc 15200000.display: probed [ 6.774755] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.883304] Console: switching to colour frame buffer device 240x67 [ 6.883811] tegra-se-nvhost 15820000.se: initialized [ 6.884280] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.884287] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.884291] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.884295] usb 1-2: Manufacturer: Generic [ 6.886375] hub 1-2:1.0: USB hub found [ 6.887745] hub 1-2:1.0: 4 ports detected [ 6.889193] tegradc 15200000.display: fb registered [ 6.889268] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.896247] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.903782] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.910570] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.914519] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.919455] tegra-se-nvhost 15830000.se: initialized [ 6.967866] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.973375] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.977055] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.979691] tegra-se-nvhost 15840000.se: initialized [ 6.988882] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.994096] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.999880] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.000564] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.001637] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.007661] tegra_actmon d230000.actmon: in actmon_register()... [ 7.013880] Extcon AUX1(HDMI) enable [ 7.021484] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.028813] tegradc 15210000.display: disp1 connected to head1->sor [ 7.035190] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.038619] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.038772] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.038848] tegradc 15210000.display: DT parsed successfully [ 7.038888] tegradc 15210000.display: Display dc.000000007c433213 registered with id=1 [ 7.039020] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.039026] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.044795] hvc_sysfs: hypervisor is not present [ 7.045698] tegradc 15210000.display: probed [ 7.050093] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.050103] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.085427] ALSA device list: [ 7.087195] usb 2-3: Manufacturer: Generic [ 7.093421] No soundcards found. [ 7.110421] hub 2-3:1.0: USB hub found [ 7.135642] tegradc 15210000.display: fb registered [ 7.137652] hub 2-3:1.0: 4 ports detected [ 7.139052] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.139058] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.139083] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.164644] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.171778] tegradc 15210000.display: blank - powerdown [ 7.176547] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.176551] Extcon DP: HPD disabled [ 7.176555] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.176637] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.176646] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.185751] Freeing unused kernel memory: 3968K ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.212661] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.212742] tegradc 15200000.display: blank - powerdown [ 7.212928] Run /init as init process [ 7.260882] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.260888] Extcon AUX1(HDMI) disable [ 7.277217] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.277222] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.284181] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.285062] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.298124] tegradc 15200000.display: unblank [ 7.299167] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.299363] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.305369] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.307211] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.311250] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.311253] Extcon AUX1(HDMI) enable [ 7.324038] tegradc 15200000.display: sync windows ret = 247 [ 7.338020] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.354942] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.354948] usb 1-3: Product: Bluetooth Radio [ 7.354952] usb 1-3: Manufacturer: Realtek [ 7.354955] usb 1-3: SerialNumber: 00e04c000001 [ 7.362540] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.370057] Extcon HDMI: HPD enabled [ 7.373718] tegradc 15200000.display: hdmi: plugged [ 7.414281] Root device found: mmcblk0p1 [ 7.417589] Found dev node: /dev/mmcblk0p1 [ 7.453759] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.459037] Rootfs mounted over mmcblk0p1 [ 7.495207] Switching from initrd to actual rootfs [ 7.664362] systemd[1]: System time before build time, advancing clock. [ 7.732498] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.737427] systemd[1]: Detected architecture arm64. [ 7.775376] systemd[1]: Set hostname to . [ 7.943715] systemd-sysv-generator[260]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.294243] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.295938] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.301968] systemd[1]: Created slice system-modprobe.slice. [ 8.309411] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.316319] systemd[1]: Created slice User and Session Slice. [ 8.322215] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.327994] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.331279] systemd[1]: Reached target User and Group Name Lookups. [ 8.334428] systemd[1]: Reached target Slices. [ 8.337348] systemd[1]: Reached target Swap. [ 8.341318] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.344829] systemd[1]: Listening on Syslog Socket. [ 8.348246] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.351534] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.355700] systemd[1]: Listening on Journal Audit Socket. [ 8.359273] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.362992] systemd[1]: Listening on Journal Socket. [ 8.366574] systemd[1]: Listening on udev Control Socket. [ 8.369981] systemd[1]: Listening on udev Kernel Socket. [ 8.378440] systemd[1]: Mounting Huge Pages File System... [ 8.387038] systemd[1]: Mounting POSIX Message Queue File System... [ 8.397216] systemd[1]: Mounting RPC Pipe File System... [ 8.407136] systemd[1]: Mounting Kernel Debug File System... [ 8.415717] systemd[1]: Mounting Kernel Trace File System... [ 8.425880] systemd[1]: Starting Journal Service... [ 8.434898] systemd[1]: Starting Set the console keyboard layout... [ 8.443227] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.446716] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.453351] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.461347] systemd[1]: Started Nameserver information manager. [ 8.466139] systemd[1]: Reached target Network (Pre). [ 8.472229] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.474124] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.482461] systemd[1]: Starting Load Kernel Modules... [ 8.490432] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.499538] systemd[1]: Starting udev Coldplug all Devices... [ 8.509922] systemd[1]: Mounted Huge Pages File System. [ 8.513711] systemd[1]: Mounted POSIX Message Queue File System. [ 8.518347] systemd[1]: Mounted RPC Pipe File System. [ 8.521960] systemd[1]: Mounted Kernel Debug File System. [ 8.525476] systemd[1]: Mounted Kernel Trace File System. [ 8.526551] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.532287] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.534340] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.535820] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.535879] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.537296] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.537306] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.541958] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.542161] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.542338] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.542352] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.551863] systemd[1]: nvfb-udev.service: Succeeded. [ 8.556458] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.567274] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.572506] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.574557] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.587581] systemd[1]: Starting Load/Save Random Seed... [ 8.596160] systemd[1]: Starting Create System Users... [ 8.636446] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.636446] [ 8.645094] systemd[1]: Finished Load/Save Random Seed. [ 8.652868] systemd[1]: Finished Create System Users. [ 8.661565] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.668308] systemd[1]: Finished Load Kernel Modules. [ 8.673373] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.680184] systemd[1]: Mounting Kernel Configuration File System... [ 8.688845] systemd[1]: Started OP-TEE Client Supplicant. [ 8.698692] systemd[1]: Starting Apply Kernel Variables... [ 8.710193] systemd[1]: Finished Set the console keyboard layout. [ 8.714299] systemd[1]: Mounted Kernel Configuration File System. [ 8.721056] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.724882] systemd[1]: Reached target Local File Systems (Pre). [ 8.727965] systemd[1]: Reached target Local File Systems. [ 8.731288] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 10.260957] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.266131] imx219 9-0010: board setup failed [ 10.267116] imx219: probe of 9-0010 failed with error -121 [ 10.289233] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.295888] imx219 10-0010: board setup failed [ 10.297357] imx219: probe of 10-0010 failed with error -121 [ 10.341084] hot-surface-alert cooling state: 0 -> 1 [ 11.244672] using random self ethernet address [ 11.246454] using random host ethernet address [ 11.969174] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.969182] Creating 1 MTD partitions on "spi6.0": [ 11.969192] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.602713] using random self ethernet address [ 12.604287] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.882179] nvidia: loading out-of-tree module taints kernel. [ 59.986356] watchdog: watchdog0: watchdog did not stop! [ 60.489597] Trying to unregister non-registered hwtime source [ 63.547861] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.549945] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0ìÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.481] I> register 'maxim' power off handle [0003.483] I> virtual i2c enabled [0003.483] I> registered 'maxim,max20024' pmic [0003.484] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.611] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.629] I> edid read success [0003.641] I> edid read success [0003.642] I> width = 640, height = 480, frequency = 25174825 [0003.642] I> width = 1920, height = 1080, frequency = 148500000 [0003.642] I> width = 1280, height = 768, frequency = 79500000 [0003.643] I> width = 1360, height = 768, frequency = 85500000 [0003.643] I> width = 720, height = 480, frequency = 26973026 [0003.647] I> width = 720, height = 576, frequency = 26973026 [0003.653] I> width = 1280, height = 720, frequency = 74175824 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1920, height = 1080, frequency = 148351648 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 720, height = 480, frequency = 26973026 [0003.681] I> width = 720, height = 576, frequency = 26973026 [0003.686] I> width = 3840, height = 2160, frequency = 296703296 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 4096, height = 2160, frequency = 296703296 [0003.715] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.727] I> hdmi_enable, starting HDMI initialisation [0003.731] I> hdmi_enable, HDMI initialisation complete [0003.741] initializing target [0003.741] calling apps_init() [0003.742] starting app kernel_boot_app [0003.743] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000766] Console: colour dummy device 80x25 [ 0.002180] printk: console [tty0] enabled [ 0.002247] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002284] pid_max: default: 32768 minimum: 301 [ 0.002474] LSM: Security Framework initializing [ 0.002532] Yama: becoming mindful. [ 0.002576] SELinux: Initializing. [ 0.002726] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002773] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005830] rcu: Hierarchical SRCU implementation. [ 0.006075] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006820] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006900] DTB Build time: Aug 10 2022 20:31:49 [ 0.009678] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009910] Remapping and enabling EFI services. [ 0.012031] smp: Bringing up secondary CPUs ... [ 0.047484] Detected PIPT I-cache on CPU1 [ 0.047576] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.077132] Detected PIPT I-cache on CPU2 [ 0.077277] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.106749] Detected PIPT I-cache on CPU3 [ 0.106891] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.136574] Detected PIPT I-cache on CPU4 [ 0.136675] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.166396] Detected PIPT I-cache on CPU5 [ 0.166542] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166919] smp: Brought up 1 node, 6 CPUs [ 0.167079] SMP: Total of 6 processors activated. [ 0.167128] CPU features: detected: Privileged Access Never [ 0.167148] CPU features: detected: LSE atomic instructions [ 0.167162] CPU features: detected: User Access Override [ 0.167175] CPU features: detected: 32-bit EL0 Support [ 0.167188] CPU features: detected: RAS Extension Support [ 0.167200] CPU features: detected: CRC32 instructions [ 0.167213] CPU features: detected: 32-bit EL1 Support [ 0.236151] CPU: All CPU(s) started at EL2 [ 0.243270] devtmpfs: initialized [ 0.290248] Registered cp15_barrier emulation handler [ 0.290380] Registered setend emulation handler [ 0.290402] KASLR enabled [ 0.290659] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.290686] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292087] pinctrl core: initialized pinctrl subsystem [ 0.293121] SMBIOS 3.0.0 present. [ 0.293151] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.293757] NET: Registered protocol family 16 [ 0.295825] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296316] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297010] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297066] audit: initializing netlink subsys (disabled) [ 0.297317] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.297772] thermal_sys: Registered thermal governor 'step_wise' [ 0.297778] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297792] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300099] cpuidle: using governor menu [ 0.300461] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300838] ASID allocator initialised with 32768 entries [ 0.301056] Serial: AMBA PL011 UART driver [ 0.304392] Tegra reboot handler registered. [ 0.375753] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375859] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.376045] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376095] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376264] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376309] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376444] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.376491] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376624] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376666] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.378931] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.378963] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.378990] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379015] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379048] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379075] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379130] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379161] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379187] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379211] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379233] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379256] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379279] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379302] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379325] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379348] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379371] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.379465] mc-err: mcerr ops are set to t19x [ 0.392248] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392274] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.392287] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392299] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399169] ACPI: Interpreter disabled. [ 0.400932] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.402722] iommu: Default domain type: Translated [ 0.402827] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.403371] SCSI subsystem initialized [ 0.403622] usbcore: registered new interface driver usbfs [ 0.403691] usbcore: registered new interface driver hub [ 0.403746] usbcore: registered new device driver usb [ 0.404477] mc: Linux media interface: v0.10 [ 0.404528] videodev: Linux video capture interface: v2.00 [ 0.405044] pps_core: LinuxPPS API ver. 1 registered [ 0.405062] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.405092] PTP clock support registered [ 0.405419] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.405846] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.405936] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.406778] Registered efivars operations [ 0.413875] FPGA manager framework [ 0.413982] Advanced Linux Sound Architecture Driver Initialized. [ 0.414558] Bluetooth: Core ver 2.22 [ 0.414605] NET: Registered protocol family 31 [ 0.414617] Bluetooth: HCI device and connection manager initialized [ 0.414636] Bluetooth: HCI socket layer initialized [ 0.414651] Bluetooth: L2CAP socket layer initialized [ 0.414671] Bluetooth: SCO socket layer initialized [ 0.416172] camchar: rtcpu character device driver loaded [ 0.416805] clocksource: Switched to clocksource arch_sys_counter [ 0.704522] VFS: Disk quotas dquot_6.6.0 [ 0.704594] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.704931] pnp: PnP ACPI: disabled [ 0.714986] la/ptsa driver initialized. [ 0.715119] NET: Registered protocol family 2 [ 0.715291] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.719901] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.720008] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.720263] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.720691] TCP: Hash tables configured (established 65536 bind 65536) [ 0.720849] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.720938] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.721149] NET: Registered protocol family 1 [ 0.721964] RPC: Registered named UNIX socket transport module. [ 0.721992] RPC: Registered udp transport module. [ 0.722006] RPC: Registered tcp transport module. [ 0.722020] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.722043] PCI: CLS 0 bytes, default 64 [ 0.722340] Trying to unpack rootfs image as initramfs... [ 0.992158] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.995290] Freeing initrd memory: 8196K [ 0.999824] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.999856] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.999902] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.000356] kvm [1]: IPA Size Limit: 40 bits [ 1.001094] kvm [1]: vgic interrupt IRQ9 [ 1.001649] kvm [1]: VHE mode initialized successfully [ 1.003518] Initialise system trusted keyrings [ 1.003925] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.010684] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.011671] NFS: Registering the id_resolver key type [ 1.011707] Key type id_resolver registered [ 1.011721] Key type id_legacy registered [ 1.011811] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.011834] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.011874] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.023067] NET: Registered protocol family 38 [ 1.023093] Key type asymmetric registered [ 1.023139] Asymmetric key parser 'x509' registered [ 1.023202] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.023558] io scheduler mq-deadline registered [ 1.023606] io scheduler kyber registered [ 1.030357] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.033684] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.033788] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.033888] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.033986] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.034060] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.040251] scrncapt: init (heads:4 wins:6 planes:4) [ 1.040369] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.041538] EINJ: ACPI disabled. [ 1.045054] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.045078] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.045092] tegra-pmc: ### PMC reset level: L1 [ 1.045105] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.045148] tegra-pmc: PMC Prod config success [ 1.050830] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.066119] random: fast init done [ 1.067799] printk: console [ttyTCU0] enabled [ 2.608443] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.612985] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.617564] arm-smmu 10000000.iommu: stage 1 translation [ 2.622886] arm-smmu 10000000.iommu: stage 2 translation [ 2.628620] arm-smmu 10000000.iommu: nested translation [ 2.633624] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.640818] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.652284] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.654173] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.660479] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.668504] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.673517] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.678239] arm-smmu 12000000.iommu: stage 1 translation [ 2.684018] arm-smmu 12000000.iommu: stage 2 translation [ 2.689201] arm-smmu 12000000.iommu: nested translation [ 2.694865] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.702039] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.713499] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.714879] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.721725] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.728941] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.738889] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.742133] tegra_profiler: auth: init [ 2.746128] THERMAL EST: found 3 subdevs [ 2.749816] THERMAL EST num_resources: 0 [ 2.753402] [THERMAL EST subdev 0] [ 2.756981] [THERMAL EST subdev 1] [ 2.760120] [THERMAL EST subdev 2] [ 2.763637] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.770106] THERMAL EST: thz register success. [ 2.774081] THERMAL EST: end of probe, return err: 0 [ 2.779465] nvsciipc: loaded module [ 2.786649] tun: Universal TUN/TAP device driver, 1.6 [ 2.788952] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.795395] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.800719] e1000e: Intel(R) PRO/1000 Network Driver [ 2.805905] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.811714] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.817271] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.823503] PPP generic driver version 2.4.2 [ 2.827726] PPP BSD Compression module registered [ 2.831992] PPP Deflate Compression module registered [ 2.837237] PPP MPPE Compression module registered [ 2.842537] usbcore: registered new interface driver r8152 [ 2.847757] usbcore: registered new interface driver asix [ 2.853395] usbcore: registered new interface driver ax88179_178a [ 2.859231] usbcore: registered new interface driver cdc_ether [ 2.865433] usbcore: registered new interface driver net1080 [ 2.871036] usbcore: registered new interface driver cdc_subset [ 2.876827] usbcore: registered new interface driver zaurus [ 2.882759] usbcore: registered new interface driver cdc_ncm [ 2.888431] usbcore: registered new interface driver aqc111 [ 2.894077] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.900156] ohci-pci: OHCI PCI platform driver [ 2.904226] ohci-platform: OHCI generic platform driver [ 2.910103] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.916621] usbcore: registered new interface driver uas [ 2.920502] usbcore: registered new interface driver usb-storage [ 2.926918] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.932671] mousedev: PS/2 mouse device common for all mice [ 2.937912] usbcore: registered new interface driver xpad [ 2.946059] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.948371] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.956196] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.962779] i2c /dev entries driver [ 2.966081] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.971835] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.977468] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.982612] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.988178] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.993402] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.998816] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.012573] device-mapper: uevent: version 1.0.3 [ 3.013065] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.019560] cpuidle: Initializing cpuidle driver [ 3.023579] sdhci: Secure Digital Host Controller Interface driver [ 3.027996] sdhci: Copyright(c) Pierre Ossman [ 3.032346] Synopsys Designware Multimedia Card Interface Driver [ 3.038281] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.044262] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.045128] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.057507] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.078925] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.088566] vdd-1v0: supplied by regulator-dummy [ 3.094207] vdd-1v8-hs: supplied by regulator-dummy [ 3.099065] vdd-1v8-ls: supplied by regulator-dummy [ 3.104065] vdd-1v8-ao: supplied by regulator-dummy [ 3.108208] vddio-ddr-1v1: supplied by regulator-dummy [ 3.112775] vdd-rtc: supplied by regulator-dummy [ 3.114595] spmic-ldo1: supplied by regulator-dummy [ 3.115898] vdd-ao-3v3: supplied by regulator-dummy [ 3.122241] vddio-emmc-3v3: supplied by regulator-dummy [ 3.128554] spmic-ldo4: supplied by regulator-dummy [ 3.129921] vdd-usb-3v3: supplied by regulator-dummy [ 3.136253] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.142482] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.148180] spmic-ldo8: supplied by vdd-1v8-ls [ 3.149675] gpio-510 (gpio_default): hogged as output/high [ 3.151139] gpio-511 (gpio_default): hogged as output/high [ 3.154061] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.290169] max77686-rtc max77620-rtc: registered as rtc0 [ 3.291307] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.291750] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.118679] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.119884] hid: raw HID events driver (C) Jiri Kosina [ 4.120773] usbcore: registered new interface driver usbhid [ 4.120962] usbhid: USB HID core driver [ 4.123157] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.124585] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.164063] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.238103] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.848 ms) ÿá[ 4.208598] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.209165] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.210219] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.210882] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.212383] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.213070] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.213683] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.214837] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.215171] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.217837] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.225143] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.231258] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.236373] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.242310] denver_knobs_init:MTS_VERSION:55637613 [ 4.255338] t19x_cache tegra-cache: probed [ 4.258482] optee: probing for conduit method. [ 4.259290] optee: revision 3.16 (65cc2218) [ 4.260331] optee: dynamic shared memory is enabled [ 4.263567] optee: initialized driver [ 4.271067] nvpmodel: initialized successfully [ 4.271700] tegra_hv: get_hvd: not initialized yet [ 4.275802] user_ivc_mempool: hypervisor not present [ 4.282242] usbcore: registered new interface driver snd-usb-audio [ 4.288236] u32 classifier [ 4.289547] input device check on [ 4.293296] Actions configured [ 4.297304] Initializing XFRM netlink socket [ 4.301792] NET: Registered protocol family 10 [ 4.307926] Segment Routing with IPv6 [ 4.309208] NET: Registered protocol family 17 [ 4.313380] NET: Registered protocol family 15 [ 4.318045] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.331751] Bluetooth: RFCOMM socket layer initialized [ 4.336072] Bluetooth: RFCOMM ver 1.11 [ 4.340217] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.345815] Bluetooth: HIDP socket layer initialized [ 4.351970] 9pnet: Installing 9P2000 support [ 4.355520] Key type dns_resolver registered [ 4.361398] registered taskstats version 1 [ 4.363913] Loading compiled-in X.509 certificates [ 4.377199] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.379464] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.389908] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.391598] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.400455] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.408562] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.524875] tegra194-pcie 14160000.pcie: Link up [ 4.527860] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.528116] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.528247] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.528539] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.528775] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.529245] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.529700] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.543071] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.543576] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.544116] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.545850] pci 0004:01:00.0: supports D1 D2 [ 4.546033] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.557344] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.557740] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.558025] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.558412] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.558654] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.558872] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.559414] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.566933] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.575373] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.585808] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.590439] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.595787] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.602707] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.611728] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.613564] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.622029] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.630243] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.745528] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.746114] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.746421] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.746563] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.746799] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.746995] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.747409] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.747882] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.767642] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.767939] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.769673] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.770871] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.772514] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.774202] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.775060] pci 0005:00:00.0: Removing from iommu group 7 [ 5.775416] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.808652] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.832326] host1x 13e10000.host1x: initialized [ 5.833948] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.834834] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.836105] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.836977] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.838231] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.839036] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.840174] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.840717] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.841909] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.845300] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.855812] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.862518] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.872894] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.879659] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.889564] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.896360] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.906256] falcon 15340000.vic: Adding to iommu group 17 [ 5.920530] falcon 15340000.vic: initialized [ 5.921589] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.927187] falcon 15380000.nvjpg: initialized [ 5.927949] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.940066] falcon 154c0000.nvenc: initialized [ 5.940693] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.950179] falcon 15a80000.nvenc1: initialized [ 5.950828] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.963076] nvdec 15480000.nvdec: initialized [ 5.963790] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.972993] nvdec 15140000.nvdec1: initialized [ 5.973528] tsec 15500000.tsec: Adding to iommu group 18 [ 5.979319] tsec 15500000.tsec: initialized [ 5.979763] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.986495] tsec 15100000.tsecb: initialized [ 5.990441] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.022523] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.036795] gpio-374 (wifi-enable): hogged as output/high [ 6.037158] gpio-431 (camera-control-output-low): hogged as output/low [ 6.037482] gpio-432 (camera-control-output-low): hogged as output/low [ 6.039415] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.041483] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.042079] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.043498] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.044586] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.048955] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.054541] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.063335] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.070021] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.081491] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.086916] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.092790] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.101645] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.110800] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.117993] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.125484] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.131704] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.141330] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.147858] pva 16000000.pva0: Adding to iommu group 22 [ 6.174910] pva 16000000.pva0: initialized [ 6.179878] pva 16800000.pva1: Adding to iommu group 23 [ 6.190923] pva 16800000.pva1: initialized [ 6.195353] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.209967] nvdla 15880000.nvdla0: initialized [ 6.211772] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.218428] random: crng init done [ 6.221608] nvdla 158c0000.nvdla1: initialized [ 6.225694] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.226000] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.226075] tegradc 15200000.display: Adding to iommu group 26 [ 6.226608] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.227059] tegradccommon 15200000.display-hub: dma mapping done [ 6.228415] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.231326] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.234301] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.235337] tegradc 15210000.display: Adding to iommu group 26 [ 6.241244] generic_infoframe_type: 0x87 [ 6.247942] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.251117] tegradc 15200000.display: DT parsed successfully [ 6.256682] tegra_cec 3960000.tegra_cec: probed [ 6.262782] tegradc 15200000.display: Display dc.00000000bba51f01 registered with id=0 [ 6.268016] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.278807] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.280765] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.288837] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.288856] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.289644] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.297398] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.303492] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.304952] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.311748] kfuse 3830000.kfuse: initialized [ 6.321790] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.325002] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.331810] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.341084] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.347947] tegradc 15210000.display: disp0 connected to head1->sor [ 6.353518] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.359363] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.367077] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.372866] tegradc 15210000.display: DT parsed successfully [ 6.380908] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.384542] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.392651] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.430207] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.435419] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.455853] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.456244] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.458978] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.467153] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.475873] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.482354] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.489869] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.496972] usb usb1: Product: xHCI Host Controller [ 6.502198] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.508576] usb usb1: SerialNumber: 3610000.xhci [ 6.514158] hub 1-0:1.0: USB hub found [ 6.516783] hub 1-0:1.0: 4 ports detected [ 6.521850] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.526217] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.534081] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.541822] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.549656] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.556939] usb usb2: Product: xHCI Host Controller [ 6.561612] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.568082] usb usb2: SerialNumber: 3610000.xhci [ 6.573312] hub 2-0:1.0: USB hub found [ 6.576267] hub 2-0:1.0: 4 ports detected [ 6.618491] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.624062] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.625508] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.625708] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.639021] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.640175] tegra194-cpufreq ccplex: probed with BWMGR [ 6.641461] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.641934] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.642392] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.643692] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.651272] tegra194-vi5 15c10000.vi: initialized [ 6.652955] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.653118] mmc0: CQHCI version 5.10 [ 6.653969] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.654147] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.654152] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.654158] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.654163] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.654167] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.656456] generic_infoframe_type: 0x87 [ 6.660900] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.666644] tegradc 15200000.display: DT parsed successfully [ 6.674476] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.681151] tegradc 15200000.display: Display dc.00000000bce55b1f registered with id=0 [ 6.687867] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.689225] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.694901] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.702106] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.704467] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.704472] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.704827] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.716647] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.716896] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.723305] nvethernet 2490000.ethernet: Macsec not supported [ 6.724623] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.732707] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.739653] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.746272] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.754251] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.764185] tegradc 15200000.display: probed [ 6.770536] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.854261] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.854544] Console: switching to colour frame buffer device 240x67 [ 6.855833] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.860862] tegradc 15200000.display: fb registered [ 6.860963] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.869713] tegra-se-nvhost 15810000.se: initialized [ 6.874317] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.874354] mmc0: Command Queue Engine enabled [ 6.874359] mmc0: periodic cache flush enabled [ 6.874372] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.874837] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.874978] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.878849] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.884968] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.885717] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.886238] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.886948] tegra-se-nvhost 15820000.se: initialized [ 6.888708] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.889244] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.955661] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.960636] tegra-se-nvhost 15830000.se: initialized [ 6.967213] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.976520] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.979854] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.980462] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.988362] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.994101] Extcon AUX1(HDMI) enable [ 6.994233] tegradc 15210000.display: disp1 connected to head1->sor [ 7.018808] tegra-se-nvhost 15840000.se: initialized [ 7.025461] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.031531] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.037391] tegradc 15210000.display: DT parsed successfully [ 7.045278] tegra_actmon d230000.actmon: in actmon_register()... [ 7.049085] tegradc 15210000.display: Display dc.00000000bffbd5d3 registered with id=1 [ 7.055378] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.063288] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.065476] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.065483] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.065496] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.065499] usb 1-2: Manufacturer: Generic [ 7.067417] hub 1-2:1.0: USB hub found [ 7.068457] hub 1-2:1.0: 4 ports detected [ 7.069002] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.074887] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.083376] hvc_sysfs: hypervisor is not present [ 7.096739] tegradc 15210000.display: probed [ 7.125124] ALSA device list: [ 7.133418] No soundcards found. [ 7.136852] tegradc 15210000.display: fb registered [ 7.140226] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.149008] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.149017] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.161966] tegradc 15210000.display: blank - powerdown [ 7.162886] Freeing unused kernel memory: 3968K [ 7.167382] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.167391] Extcon DP: HPD disabled [ 7.171798] Run /init as init process [ 7.179877] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.181965] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.187310] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.201047] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.214227] tegradc 15200000.display: blank - powerdown [ 7.218799] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.218806] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.218810] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.218814] usb 2-3: Manufacturer: Generic [ 7.229621] hub 2-3:1.0: USB hub found [ 7.231431] hub 2-3:1.0: 4 ports detected [ 7.256141] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.256145] Extcon AUX1(HDMI) disable [ 7.279448] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.280303] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.291485] tegradc 15200000.display: unblank [ 7.292543] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.292737] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.298778] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.300638] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.304687] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.304691] Extcon AUX1(HDMI) enable [ 7.317390] tegradc 15200000.display: sync windows ret = 246 [ 7.330145] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.340840] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.352515] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.357668] Extcon HDMI: HPD enabled [ 7.361231] tegradc 15200000.display: hdmi: plugged [ 7.394705] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.396200] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.403885] Root device found: mmcblk0p1 [ 7.407147] Found dev node: /dev/mmcblk0p1 [ 7.443112] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.448416] Rootfs mounted over mmcblk0p1 [ 7.484507] Switching from initrd to actual rootfs [ 7.506028] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.507566] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.508993] usb 1-3: Product: Bluetooth Radio [ 7.510371] usb 1-3: Manufacturer: Realtek [ 7.511722] usb 1-3: SerialNumber: 00e04c000001 [ 7.648730] systemd[1]: System time before build time, advancing clock. [ 7.720864] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.725748] systemd[1]: Detected architecture arm64. [ 7.773474] systemd[1]: Set hostname to . [ 7.939198] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.289205] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.290917] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.296337] systemd[1]: Created slice system-modprobe.slice. [ 8.300941] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.305033] systemd[1]: Created slice User and Session Slice. [ 8.308350] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.312510] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.316005] systemd[1]: Reached target User and Group Name Lookups. [ 8.319211] systemd[1]: Reached target Slices. [ 8.322198] systemd[1]: Reached target Swap. [ 8.326022] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.329593] systemd[1]: Listening on Syslog Socket. [ 8.333091] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.336337] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.340475] systemd[1]: Listening on Journal Audit Socket. [ 8.344075] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.347804] systemd[1]: Listening on Journal Socket. [ 8.351445] systemd[1]: Listening on udev Control Socket. [ 8.354942] systemd[1]: Listening on udev Kernel Socket. [ 8.362923] systemd[1]: Mounting Huge Pages File System... [ 8.370953] systemd[1]: Mounting POSIX Message Queue File System... [ 8.378645] systemd[1]: Mounting RPC Pipe File System... [ 8.386903] systemd[1]: Mounting Kernel Debug File System... [ 8.398131] systemd[1]: Mounting Kernel Trace File System... [ 8.407780] systemd[1]: Starting Journal Service... [ 8.416691] systemd[1]: Starting Set the console keyboard layout... [ 8.424942] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.428442] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.435143] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.443260] systemd[1]: Started Nameserver information manager. [ 8.447926] systemd[1]: Reached target Network (Pre). [ 8.455010] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.455223] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.461586] systemd[1]: Starting Load Kernel Modules... [ 8.470340] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.478748] systemd[1]: Starting udev Coldplug all Devices... [ 8.490636] systemd[1]: Mounted Huge Pages File System. [ 8.494538] systemd[1]: Mounted POSIX Message Queue File System. [ 8.499481] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.500209] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.500684] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.500693] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.500705] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.500709] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.501473] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.501608] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.501619] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.502283] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.520354] systemd[1]: Mounted RPC Pipe File System. [ 8.526773] systemd[1]: Mounted Kernel Debug File System. [ 8.531323] systemd[1]: Mounted Kernel Trace File System. [ 8.537699] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.543286] systemd[1]: nvfb-udev.service: Succeeded. [ 8.547690] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.559981] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.572723] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.575352] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.585697] systemd[1]: Starting Load/Save Random Seed... [ 8.587974] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.587974] [ 8.600988] systemd[1]: Starting Create System Users... [ 8.628442] systemd[1]: Finished Load Kernel Modules. [ 8.633986] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.640682] systemd[1]: Mounting Kernel Configuration File System... [ 8.648316] systemd[1]: Started OP-TEE Client Supplicant. [ 8.658879] systemd[1]: Starting Apply Kernel Variables... [ 8.667834] systemd[1]: Finished Load/Save Random Seed. [ 8.675560] systemd[1]: Finished Set the console keyboard layout. [ 8.680027] systemd[1]: Mounted Kernel Configuration File System. [ 8.691980] systemd[1]: Finished Create System Users. [ 10.047226] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.053785] imx219 9-0010: board setup failed [ 10.088914] imx219: probe of 9-0010 failed with error -121 [ 10.108976] hot-surface-alert cooling state: 0 -> 1 [ 10.135387] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.140617] imx219 10-0010: board setup failed [ 10.142067] imx219: probe of 10-0010 failed with error -121 [ 11.133968] using random self ethernet address [ 11.135267] using random host ethernet address [ 11.163616] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.164959] Creating 1 MTD partitions on "spi6.0": [ 11.166233] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.254982] using random self ethernet address [ 12.256962] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.811333] nvidia: loading out-of-tree module taints kernel. [ 59.382621] watchdog: watchdog0: watchdog did not stop! [ 59.877576] Trying to unregister non-registered hwtime source [ 62.944104] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.945897] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.325] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/Tÿâclk_early initialized ÿäC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized noc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 aÿâavfs_clk_platform_post initialized ÿäarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.482] I> register 'maxim' power off handle [0003.484] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.617] E> invalid display type [0003.618] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.647] I> edid read success [0003.647] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.648] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.649] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.681] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 4096, height = 2160, frequency = 296703296 [0003.721] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.732] I> hdmi_enable, starting HDMI initialisation [0003.737] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.747] calling apps_init() [0003.748] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000702] Console: colour dummy device 80x25 [ 0.002196] printk: console [tty0] enabled [ 0.002273] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002335] pid_max: default: 32768 minimum: 301 [ 0.002500] LSM: Security Framework initializing [ 0.002573] Yama: becoming mindful. [ 0.002632] SELinux: Initializing. [ 0.002794] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002832] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005677] rcu: Hierarchical SRCU implementation. [ 0.005933] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006599] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006646] DTB Build time: Aug 10 2022 20:31:49 [ 0.009344] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009588] Remapping and enabling EFI services. [ 0.011660] smp: Bringing up secondary CPUs ... [ 0.040875] Detected PIPT I-cache on CPU1 [ 0.040955] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071418] Detected PIPT I-cache on CPU2 [ 0.071562] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101143] Detected PIPT I-cache on CPU3 [ 0.101245] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130897] Detected PIPT I-cache on CPU4 [ 0.131122] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160909] Detected PIPT I-cache on CPU5 [ 0.161020] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161347] smp: Brought up 1 node, 6 CPUs [ 0.161535] SMP: Total of 6 processors activated. [ 0.161609] CPU features: detected: Privileged Access Never [ 0.161633] CPU features: detected: LSE atomic instructions [ 0.161647] CPU features: detected: User Access Override [ 0.161660] CPU features: detected: 32-bit EL0 Support [ 0.161672] CPU features: detected: RAS Extension Support [ 0.161685] CPU features: detected: CRC32 instructions [ 0.161698] CPU features: detected: 32-bit EL1 Support [ 0.230067] CPU: All CPU(s) started at EL2 [ 0.236039] devtmpfs: initialized [ 0.282837] Registered cp15_barrier emulation handler [ 0.282959] Registered setend emulation handler [ 0.282981] KASLR enabled [ 0.283262] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.283289] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.284570] pinctrl core: initialized pinctrl subsystem [ 0.285598] SMBIOS 3.0.0 present. [ 0.285626] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.286324] NET: Registered protocol family 16 [ 0.288586] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.289082] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.289841] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.289901] audit: initializing netlink subsys (disabled) [ 0.290205] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.290722] thermal_sys: Registered thermal governor 'step_wise' [ 0.290729] thermal_sys: Registered thermal governor 'power_allocator' [ 0.290744] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.293179] cpuidle: using governor menu [ 0.293523] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.293986] ASID allocator initialised with 32768 entries [ 0.294208] Serial: AMBA PL011 UART driver [ 0.297455] Tegra reboot handler registered. [ 0.364848] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.364967] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.365176] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.365214] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.365334] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.365368] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.365479] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.365514] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.365660] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.365697] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.367926] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.367958] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.367986] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.368012] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.368044] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.368080] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.368111] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.368152] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.368176] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.368200] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.368223] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.368245] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.368268] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.368290] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.368313] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.368335] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.368357] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.368438] mc-err: mcerr ops are set to t19x [ 0.379328] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.379370] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.379382] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.379394] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.386712] ACPI: Interpreter disabled. [ 0.387736] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.388915] iommu: Default domain type: Translated [ 0.388983] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.389369] SCSI subsystem initialized [ 0.389530] usbcore: registered new interface driver usbfs [ 0.389571] usbcore: registered new interface driver hub [ 0.389605] usbcore: registered new device driver usb [ 0.389993] mc: Linux media interface: v0.10 [ 0.390019] videodev: Linux video capture interface: v2.00 [ 0.390336] pps_core: LinuxPPS API ver. 1 registered [ 0.390350] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.390370] PTP clock support registered [ 0.390599] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.390906] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.391023] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.391605] Registered efivars operations [ 0.396777] FPGA manager framework [ 0.396883] Advanced Linux Sound Architecture Driver Initialized. [ 0.397397] Bluetooth: Core ver 2.22 [ 0.397434] NET: Registered protocol family 31 [ 0.397445] Bluetooth: HCI device and connection manager initialized [ 0.397460] Bluetooth: HCI socket layer initialized [ 0.397475] Bluetooth: L2CAP socket layer initialized [ 0.397496] Bluetooth: SCO socket layer initialized [ 0.399137] camchar: rtcpu character device driver loaded [ 0.399870] clocksource: Switched to clocksource arch_sys_counter [ 0.750097] VFS: Disk quotas dquot_6.6.0 [ 0.750171] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.750529] pnp: PnP ACPI: disabled [ 0.762916] la/ptsa driver initialized. [ 0.763030] NET: Registered protocol family 2 [ 0.763217] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.767920] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.767985] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.768274] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.768711] TCP: Hash tables configured (established 65536 bind 65536) [ 0.768909] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.769017] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.769206] NET: Registered protocol family 1 [ 0.769903] RPC: Registered named UNIX socket transport module. [ 0.769917] RPC: Registered udp transport module. [ 0.769926] RPC: Registered tcp transport module. [ 0.769935] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.769961] PCI: CLS 0 bytes, default 64 [ 0.770154] Trying to unpack rootfs image as initramfs... [ 0.957246] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.959309] Freeing initrd memory: 8196K [ 0.963291] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.963361] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.963407] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.963836] kvm [1]: IPA Size Limit: 40 bits [ 0.964502] kvm [1]: vgic interrupt IRQ9 [ 0.965029] kvm [1]: VHE mode initialized successfully [ 0.966467] Initialise system trusted keyrings [ 0.966786] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.971164] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.971851] NFS: Registering the id_resolver key type [ 0.971924] Key type id_resolver registered [ 0.971958] Key type id_legacy registered [ 0.972041] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.972060] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.972101] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.980967] NET: Registered protocol family 38 [ 0.981010] Key type asymmetric registered [ 0.981021] Asymmetric key parser 'x509' registered [ 0.981058] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.981314] io scheduler mq-deadline registered [ 0.981327] io scheduler kyber registered [ 0.985865] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.987894] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.987949] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.987999] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.988046] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.988093] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.992207] scrncapt: init (heads:4 wins:6 planes:4) [ 0.992655] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.993405] EINJ: ACPI disabled. [ 0.996006] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.996025] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.996035] tegra-pmc: ### PMC reset level: L1 [ 0.996045] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.996080] tegra-pmc: PMC Prod config success [ 1.001066] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.005597] random: fast init done [ 1.006440] printk: console [ttyTCU0] enabled [ 2.558567] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.562410] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.566985] arm-smmu 10000000.iommu: stage 1 translation [ 2.572916] arm-smmu 10000000.iommu: stage 2 translation [ 2.578221] arm-smmu 10000000.iommu: nested translation [ 2.583557] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.590729] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.602108] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.603834] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.610181] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.618239] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.623197] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.628176] arm-smmu 12000000.iommu: stage 1 translation [ 2.633426] arm-smmu 12000000.iommu: stage 2 translation [ 2.639107] arm-smmu 12000000.iommu: nested translation [ 2.644292] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.651459] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.663758] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.664847] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.671143] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.678889] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.689340] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.692036] tegra_profiler: auth: init [ 2.696440] THERMAL EST: found 3 subdevs [ 2.699454] THERMAL EST num_resources: 0 [ 2.703369] [THERMAL EST subdev 0] [ 2.706399] [THERMAL EST subdev 1] [ 2.709807] [THERMAL EST subdev 2] [ 2.713307] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.719819] THERMAL EST: thz register success. [ 2.723762] THERMAL EST: end of probe, return err: 0 [ 2.729186] nvsciipc: loaded module [ 2.736608] tun: Universal TUN/TAP device driver, 1.6 [ 2.738828] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.744828] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.750680] e1000e: Intel(R) PRO/1000 Network Driver [ 2.755569] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.761423] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.766684] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.773148] PPP generic driver version 2.4.2 [ 2.777185] PPP BSD Compression module registered [ 2.781927] PPP Deflate Compression module registered [ 2.787223] PPP MPPE Compression module registered [ 2.791943] usbcore: registered new interface driver r8152 [ 2.797702] usbcore: registered new interface driver asix [ 2.802771] usbcore: registered new interface driver ax88179_178a [ 2.808896] usbcore: registered new interface driver cdc_ether [ 2.814846] usbcore: registered new interface driver net1080 [ 2.820692] usbcore: registered new interface driver cdc_subset [ 2.826512] usbcore: registered new interface driver zaurus [ 2.832200] usbcore: registered new interface driver cdc_ncm [ 2.837859] usbcore: registered new interface driver aqc111 [ 2.843762] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.849606] ohci-pci: OHCI PCI platform driver [ 2.854123] ohci-platform: OHCI generic platform driver [ 2.860212] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.866637] usbcore: registered new interface driver uas [ 2.870434] usbcore: registered new interface driver usb-storage [ 2.876592] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.882390] mousedev: PS/2 mouse device common for all mice [ 2.887585] usbcore: registered new interface driver xpad [ 2.895543] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.898113] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.905877] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.912402] i2c /dev entries driver [ 2.915697] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.921638] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.926919] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.932534] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.937868] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.943083] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.948821] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.963835] device-mapper: uevent: version 1.0.3 [ 2.964543] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.969288] cpuidle: Initializing cpuidle driver [ 2.973145] sdhci: Secure Digital Host Controller Interface driver [ 2.977686] sdhci: Copyright(c) Pierre Ossman [ 2.982024] Synopsys Designware Multimedia Card Interface Driver [ 2.987989] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.994060] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.994889] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.007521] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.028873] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.038981] vdd-1v0: supplied by regulator-dummy [ 3.044537] vdd-1v8-hs: supplied by regulator-dummy [ 3.049453] vdd-1v8-ls: supplied by regulator-dummy [ 3.054370] vdd-1v8-ao: supplied by regulator-dummy [ 3.058559] vddio-ddr-1v1: supplied by regulator-dummy [ 3.063164] vdd-rtc: supplied by regulator-dummy [ 3.065206] spmic-ldo1: supplied by regulator-dummy [ 3.066479] vdd-ao-3v3: supplied by regulator-dummy [ 3.072709] vddio-emmc-3v3: supplied by regulator-dummy [ 3.079145] spmic-ldo4: supplied by regulator-dummy [ 3.080397] vdd-usb-3v3: supplied by regulator-dummy [ 3.086796] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.093044] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.098761] spmic-ldo8: supplied by vdd-1v8-ls [ 3.100329] gpio-510 (gpio_default): hogged as output/high [ 3.101776] gpio-511 (gpio_default): hogged as output/high [ 3.104852] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.241201] max77686-rtc max77620-rtc: registered as rtc0 [ 3.242628] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.242996] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.104818] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.106272] hid: raw HID events driver (C) Jiri Kosina [ 4.107313] usbcore: registered new interface driver usbhid [ 4.107476] usbhid: USB HID core driver [ 4.110323] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.112043] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.196108] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.268930] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 73.630 ms) ÿá[ 4.195317] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.196011] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.197181] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.198131] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.200164] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.200942] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.201627] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.203179] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.203379] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.206548] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.212223] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.218178] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.223131] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.231306] denver_knobs_init:MTS_VERSION:55637613 [ 4.244433] t19x_cache tegra-cache: probed [ 4.249824] optee: probing for conduit method. [ 4.250752] optee: revision 3.16 (65cc2218) [ 4.252472] optee: dynamic shared memory is enabled [ 4.253816] optee: initialized driver [ 4.257792] nvpmodel: initialized successfully [ 4.258290] tegra_hv: get_hvd: not initialized yet [ 4.262008] user_ivc_mempool: hypervisor not present [ 4.268683] usbcore: registered new interface driver snd-usb-audio [ 4.275000] u32 classifier [ 4.276018] input device check on [ 4.279624] Actions configured [ 4.283218] Initializing XFRM netlink socket [ 4.288407] NET: Registered protocol family 10 [ 4.294641] Segment Routing with IPv6 [ 4.295289] NET: Registered protocol family 17 [ 4.299633] NET: Registered protocol family 15 [ 4.304002] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.317733] Bluetooth: RFCOMM socket layer initialized [ 4.322544] Bluetooth: RFCOMM ver 1.11 [ 4.326205] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.332263] Bluetooth: HIDP socket layer initialized [ 4.338661] 9pnet: Installing 9P2000 support [ 4.341555] Key type dns_resolver registered [ 4.346868] registered taskstats version 1 [ 4.350141] Loading compiled-in X.509 certificates [ 4.364883] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.366380] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.376159] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.377794] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.386655] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.395137] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.511991] tegra194-pcie 14160000.pcie: Link up [ 4.514998] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.515210] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.515368] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.515649] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.515849] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.516404] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.516930] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.531312] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.531855] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.532693] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.534147] pci 0004:01:00.0: supports D1 D2 [ 4.534383] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.545387] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.545801] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.546079] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.546539] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.546913] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.547150] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.547477] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.554443] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.562999] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.573157] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.577693] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.583317] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.591274] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.600030] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.600470] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.609189] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.617476] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.724074] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.724618] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.724882] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.725137] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.725410] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.725600] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.726092] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.726538] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.745743] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.746069] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.748451] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.749828] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.751794] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.753754] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.754916] pci 0005:00:00.0: Removing from iommu group 7 [ 5.755327] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.792706] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.818514] host1x 13e10000.host1x: initialized [ 5.820749] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.821698] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.823006] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.823793] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.825258] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.825913] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.827167] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.828020] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.829181] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.829957] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.834408] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.841110] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.850950] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.858213] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.868500] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.875155] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.885085] falcon 15340000.vic: Adding to iommu group 17 [ 5.900090] falcon 15340000.vic: initialized [ 5.901131] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.906453] falcon 15380000.nvjpg: initialized [ 5.907121] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.918239] falcon 154c0000.nvenc: initialized [ 5.918803] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.927816] falcon 15a80000.nvenc1: initialized [ 5.928413] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.942612] nvdec 15480000.nvdec: initialized [ 5.943285] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.953243] nvdec 15140000.nvdec1: initialized [ 5.953835] tsec 15500000.tsec: Adding to iommu group 18 [ 5.959417] tsec 15500000.tsec: initialized [ 5.960097] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.965092] tsec 15100000.tsecb: initialized [ 5.969244] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.995271] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.009184] gpio-374 (wifi-enable): hogged as output/high [ 6.009545] gpio-431 (camera-control-output-low): hogged as output/low [ 6.009884] gpio-432 (camera-control-output-low): hogged as output/low [ 6.012085] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.014450] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.015097] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.016844] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.021677] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.027561] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.033324] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.041568] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.048577] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.060794] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.065363] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.071408] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.080216] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.089347] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.097192] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.104394] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.110321] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.120210] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.126474] pva 16000000.pva0: Adding to iommu group 22 [ 6.154419] pva 16000000.pva0: initialized [ 6.159526] pva 16800000.pva1: Adding to iommu group 23 [ 6.180216] pva 16800000.pva1: initialized [ 6.185548] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.199276] nvdla 15880000.nvdla0: initialized [ 6.201095] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.218140] nvdla 158c0000.nvdla1: initialized [ 6.222990] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.223364] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.223721] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.223742] tegradc 15200000.display: Adding to iommu group 26 [ 6.223749] tegradccommon 15200000.display-hub: dma mapping done [ 6.224805] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.225789] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.226699] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.227291] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.227587] tegra_cec 3960000.tegra_cec: probed [ 6.229189] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.231797] tegradc 15210000.display: Adding to iommu group 26 [ 6.231838] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.240814] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.244822] generic_infoframe_type: 0x87 [ 6.252010] kfuse 3830000.kfuse: initialized [ 6.254986] tegradc 15200000.display: DT parsed successfully [ 6.260523] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.265208] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.270546] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.271635] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.279521] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.289092] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.294054] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.295191] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.303727] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.308328] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.309729] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.318646] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.326293] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.332453] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.338412] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.350147] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.357055] tegradc 15210000.display: disp0 connected to head1->sor [ 6.361821] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.369998] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.390790] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.398631] tegradc 15210000.display: DT parsed successfully [ 6.405112] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.405229] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.414990] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.421813] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.450955] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.457535] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.464775] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.472109] usb usb1: Product: xHCI Host Controller [ 6.477088] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.483468] usb usb1: SerialNumber: 3610000.xhci [ 6.489294] hub 1-0:1.0: USB hub found [ 6.491850] hub 1-0:1.0: 4 ports detected [ 6.496741] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.501439] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.509281] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.517035] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.524538] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.531777] usb usb2: Product: xHCI Host Controller [ 6.537015] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.542969] usb usb2: SerialNumber: 3610000.xhci [ 6.548761] hub 2-0:1.0: USB hub found [ 6.551679] hub 2-0:1.0: 4 ports detected [ 6.598693] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.604650] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.605970] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.606208] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.619455] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.620516] tegra194-cpufreq ccplex: probed with BWMGR [ 6.621841] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.622257] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.622701] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.624009] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.630890] tegra194-vi5 15c10000.vi: initialized [ 6.632343] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.632562] generic_infoframe_type: 0x87 [ 6.633264] mmc0: CQHCI version 5.10 [ 6.633598] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.633803] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.633809] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.633816] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.633821] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.633826] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.635544] tegradc 15200000.display: DT parsed successfully [ 6.643954] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.645454] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.653609] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.685286] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.691888] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.700023] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.700054] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.703914] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.708306] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.715388] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.730121] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.738172] nvethernet 2490000.ethernet: Macsec not supported [ 6.746216] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.754523] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.763902] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.766822] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.767184] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.767300] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.767422] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.768710] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.770249] tegra-se-nvhost 15810000.se: initialized [ 6.776769] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.782042] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.811901] tegradc 15200000.display: probed [ 6.818242] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.836560] mmc0: Command Queue Engine enabled [ 6.842786] tegra-se-nvhost 15820000.se: initialized [ 6.849193] mmc0: periodic cache flush enabled [ 6.856188] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.859908] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.864859] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.869877] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.874252] tegra-se-nvhost 15830000.se: initialized [ 6.880135] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.887647] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.903974] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.909695] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.930099] Console: switching to colour frame buffer device 240x67 [ 6.930435] tegra-se-nvhost 15840000.se: initialized [ 6.935779] tegradc 15200000.display: fb registered [ 6.942384] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.945786] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.953328] tegra_actmon d230000.actmon: in actmon_register()... [ 6.958292] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.963397] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.969394] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.975127] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.989636] hvc_sysfs: hypervisor is not present [ 6.996297] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.001904] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.009246] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.013626] usb 1-2: Manufacturer: Generic [ 7.019843] hub 1-2:1.0: USB hub found [ 7.021136] ALSA device list: [ 7.022990] hub 1-2:1.0: 4 ports detected [ 7.024749] No soundcards found. [ 7.049967] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.051263] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.051495] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.054136] random: crng init done [ 7.061054] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.067887] Extcon AUX1(HDMI) enable [ 7.071483] tegradc 15210000.display: disp1 connected to head1->sor [ 7.077782] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.084791] tegradc 15210000.display: DT parsed successfully [ 7.090068] tegradc 15210000.display: Display dc.000000009eb1a839 registered with id=1 [ 7.090082] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.098351] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.111641] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.125237] tegradc 15210000.display: probed [ 7.125650] tegradc 15210000.display: fb registered [ 7.130504] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.134769] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.136684] Freeing unused kernel memory: 3968K [ 7.142409] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.152564] tegradc 15210000.display: blank - powerdown [ 7.156172] Run /init as init process [ 7.157760] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.169986] Extcon DP: HPD disabled [ 7.170016] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.173514] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.181733] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.181738] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.181742] usb 2-3: Manufacturer: Generic [ 7.204166] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.210259] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.220778] Root device found: mmcblk0p1 [ 7.222843] Found dev node: /dev/mmcblk0p1 [ 7.223768] hub 2-3:1.0: USB hub found [ 7.231394] hub 2-3:1.0: 4 ports detected [ 7.233347] tegra_cec 3960000.tegra_cec: Can't find physical address. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.239712] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.239773] tegradc 15200000.display: blank - powerdown [ 7.261637] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.265512] Rootfs mounted over mmcblk0p1 [ 7.267906] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.283715] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.283719] Extcon AUX1(HDMI) disable [ 7.293698] Switching from initrd to actual rootfs [ 7.307013] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.307883] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.320908] tegradc 15200000.display: unblank [ 7.321939] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.322149] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.327924] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.329800] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.333861] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.333865] Extcon AUX1(HDMI) enable [ 7.346564] tegradc 15200000.display: sync windows ret = 247 [ 7.377517] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.378948] Extcon HDMI: HPD enabled [ 7.380285] tegradc 15200000.display: hdmi: plugged [ 7.417254] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.418804] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.420237] usb 1-3: Product: Bluetooth Radio [ 7.421551] usb 1-3: Manufacturer: Realtek [ 7.422852] usb 1-3: SerialNumber: 00e04c000001 [ 7.453823] systemd[1]: System time before build time, advancing clock. [ 7.523749] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.529389] systemd[1]: Detected architecture arm64. [ 7.579048] systemd[1]: Set hostname to . [ 7.744197] systemd-sysv-generator[243]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.089350] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.091094] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.097088] systemd[1]: Created slice system-modprobe.slice. [ 8.101988] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.106326] systemd[1]: Created slice User and Session Slice. [ 8.109888] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.114182] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.117870] systemd[1]: Reached target User and Group Name Lookups. [ 8.121167] systemd[1]: Reached target Slices. [ 8.124330] systemd[1]: Reached target Swap. [ 8.128399] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.132240] systemd[1]: Listening on Syslog Socket. [ 8.135994] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.139449] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.143895] systemd[1]: Listening on Journal Audit Socket. [ 8.147650] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.151581] systemd[1]: Listening on Journal Socket. [ 8.155336] systemd[1]: Listening on udev Control Socket. [ 8.159012] systemd[1]: Listening on udev Kernel Socket. [ 8.167663] systemd[1]: Mounting Huge Pages File System... [ 8.176227] systemd[1]: Mounting POSIX Message Queue File System... [ 8.184593] systemd[1]: Mounting RPC Pipe File System... [ 8.193451] systemd[1]: Mounting Kernel Debug File System... [ 8.203370] systemd[1]: Mounting Kernel Trace File System... [ 8.214937] systemd[1]: Starting Journal Service... [ 8.223903] systemd[1]: Starting Set the console keyboard layout... [ 8.232188] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.236057] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.242529] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.251084] systemd[1]: Started Nameserver information manager. [ 8.256520] systemd[1]: Reached target Network (Pre). [ 8.263440] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.265365] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.273902] systemd[1]: Starting Load Kernel Modules... [ 8.281570] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.289600] systemd[1]: Starting udev Coldplug all Devices... [ 8.300266] systemd[1]: Mounted Huge Pages File System. [ 8.304099] systemd[1]: Mounted POSIX Message Queue File System. [ 8.307820] systemd[1]: Mounted RPC Pipe File System. [ 8.310130] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.315798] systemd[1]: Mounted Kernel Debug File System. [ 8.318009] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.318900] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.322017] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.322793] systemd[1]: Mounted Kernel Trace File System. [ 8.323655] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.326584] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.326877] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.328280] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.331280] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.331291] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.339241] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.348559] systemd[1]: nvfb-udev.service: Succeeded. [ 8.352696] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.362089] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.367186] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.369029] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.382704] systemd[1]: Starting Load/Save Random Seed... [ 8.390378] systemd[1]: Starting Create System Users... [ 8.438453] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.438453] [ 8.438611] systemd[1]: Finished Load/Save Random Seed. [ 8.455284] systemd[1]: Finished Create System Users. [ 8.463638] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.470620] systemd[1]: Finished Load Kernel Modules. [ 8.475344] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.481775] systemd[1]: Mounting Kernel Configuration File System... [ 8.489584] systemd[1]: Started OP-TEE Client Supplicant. [ 8.497930] systemd[1]: Starting Apply Kernel Variables... [ 8.508730] systemd[1]: Finished Set the console keyboard layout. [ 8.515266] systemd[1]: Mounted Kernel Configuration File System. [ 8.521987] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.526351] systemd[1]: Reached target Local File Systems (Pre). [ 8.529540] systemd[1]: Reached target Local File Systems. [ 9.920239] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.928108] imx219 9-0010: board setup failed [ 9.929498] imx219: probe of 9-0010 failed with error -121 [ 9.953436] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.958614] imx219 10-0010: board setup failed [ 9.960118] imx219: probe of 10-0010 failed with error -121 [ 10.156097] hot-surface-alert cooling state: 0 -> 1 [ 10.958115] using random self ethernet address [ 10.959419] using random host ethernet address [ 11.464238] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.464245] Creating 1 MTD partitions on "spi6.0": [ 11.464254] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.293316] using random self ethernet address [ 12.294899] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.807141] nvidia: loading out-of-tree module taints kernel. [ 59.233734] watchdog: watchdog0: watchdog did not stop! [ 59.730819] Trying to unregister non-registered hwtime source [ 62.799051] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.800841] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, côÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.045] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.086] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.107] I> Temperature = 69500 [0000.110] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.201] I> Qspi flash params source = mb1bct [0000.235] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.928] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.939] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.961] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.325] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.493] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.686] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.746] calling apps_init() [0003.747] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000714] Console: colour dummy device 80x25 [ 0.002019] printk: console [tty0] enabled [ 0.002099] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002134] pid_max: default: 32768 minimum: 301 [ 0.002302] LSM: Security Framework initializing [ 0.002361] Yama: becoming mindful. [ 0.002402] SELinux: Initializing. [ 0.002587] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002625] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005644] rcu: Hierarchical SRCU implementation. [ 0.005883] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006818] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006873] DTB Build time: Aug 10 2022 20:31:49 [ 0.010114] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010394] Remapping and enabling EFI services. [ 0.012342] smp: Bringing up secondary CPUs ... [ 0.045967] Detected PIPT I-cache on CPU1 [ 0.046073] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.078794] Detected PIPT I-cache on CPU2 [ 0.078940] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.108456] Detected PIPT I-cache on CPU3 [ 0.108648] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.138282] Detected PIPT I-cache on CPU4 [ 0.138392] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.167961] Detected PIPT I-cache on CPU5 [ 0.168112] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.168400] smp: Brought up 1 node, 6 CPUs [ 0.168574] SMP: Total of 6 processors activated. [ 0.168642] CPU features: detected: Privileged Access Never [ 0.168665] CPU features: detected: LSE atomic instructions [ 0.168677] CPU features: detected: User Access Override [ 0.168690] CPU features: detected: 32-bit EL0 Support [ 0.168701] CPU features: detected: RAS Extension Support [ 0.168712] CPU features: detected: CRC32 instructions [ 0.168724] CPU features: detected: 32-bit EL1 Support [ 0.238325] CPU: All CPU(s) started at EL2 [ 0.244318] devtmpfs: initialized [ 0.294389] Registered cp15_barrier emulation handler [ 0.294473] Registered setend emulation handler [ 0.294497] KASLR enabled [ 0.294774] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.294799] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.296148] pinctrl core: initialized pinctrl subsystem [ 0.297964] SMBIOS 3.0.0 present. [ 0.297993] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.298657] NET: Registered protocol family 16 [ 0.300577] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.301092] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.301818] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.301879] audit: initializing netlink subsys (disabled) [ 0.302164] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.302593] thermal_sys: Registered thermal governor 'step_wise' [ 0.302599] thermal_sys: Registered thermal governor 'power_allocator' [ 0.302614] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.304647] cpuidle: using governor menu [ 0.305031] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.305414] ASID allocator initialised with 32768 entries [ 0.305673] Serial: AMBA PL011 UART driver [ 0.309935] Tegra reboot handler registered. [ 0.380634] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.380755] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.380936] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.380982] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.381100] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.381143] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.381258] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.381302] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.381422] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.381464] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.383799] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.383831] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.383858] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.383884] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.383929] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.383956] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.383995] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.384025] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.384049] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.384072] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.384095] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.384118] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.384140] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.384163] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.384191] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.384215] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.384255] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.384378] mc-err: mcerr ops are set to t19x [ 0.397172] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.397205] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.397222] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.397236] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.403898] ACPI: Interpreter disabled. [ 0.404973] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.406134] iommu: Default domain type: Translated [ 0.406195] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.406588] SCSI subsystem initialized [ 0.406767] usbcore: registered new interface driver usbfs [ 0.406807] usbcore: registered new interface driver hub [ 0.406842] usbcore: registered new device driver usb [ 0.407334] mc: Linux media interface: v0.10 [ 0.407367] videodev: Linux video capture interface: v2.00 [ 0.407670] pps_core: LinuxPPS API ver. 1 registered [ 0.407682] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.407715] PTP clock support registered [ 0.407955] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.408289] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.408375] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.408995] Registered efivars operations [ 0.415395] FPGA manager framework [ 0.415539] Advanced Linux Sound Architecture Driver Initialized. [ 0.416149] Bluetooth: Core ver 2.22 [ 0.416186] NET: Registered protocol family 31 [ 0.416197] Bluetooth: HCI device and connection manager initialized [ 0.416214] Bluetooth: HCI socket layer initialized [ 0.416230] Bluetooth: L2CAP socket layer initialized [ 0.416250] Bluetooth: SCO socket layer initialized [ 0.417888] camchar: rtcpu character device driver loaded [ 0.418820] clocksource: Switched to clocksource arch_sys_counter [ 0.862512] VFS: Disk quotas dquot_6.6.0 [ 0.862617] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.863199] pnp: PnP ACPI: disabled [ 0.877127] la/ptsa driver initialized. [ 0.877286] NET: Registered protocol family 2 [ 0.877514] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.888515] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.888700] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.889075] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.889709] TCP: Hash tables configured (established 65536 bind 65536) [ 0.889926] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.890075] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.890371] NET: Registered protocol family 1 [ 0.891485] RPC: Registered named UNIX socket transport module. [ 0.891524] RPC: Registered udp transport module. [ 0.891538] RPC: Registered tcp transport module. [ 0.891552] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.891574] PCI: CLS 0 bytes, default 64 [ 0.891854] Trying to unpack rootfs image as initramfs... [ 1.161167] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.164352] Freeing initrd memory: 8196K [ 1.169323] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.169364] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.169401] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.169941] kvm [1]: IPA Size Limit: 40 bits [ 1.170565] kvm [1]: vgic interrupt IRQ9 [ 1.171243] kvm [1]: VHE mode initialized successfully [ 1.172908] Initialise system trusted keyrings [ 1.173343] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.181291] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.182308] NFS: Registering the id_resolver key type [ 1.182346] Key type id_resolver registered [ 1.182361] Key type id_legacy registered [ 1.182492] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.182538] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.182579] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.194140] NET: Registered protocol family 38 [ 1.194164] Key type asymmetric registered [ 1.194179] Asymmetric key parser 'x509' registered [ 1.194242] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.194540] io scheduler mq-deadline registered [ 1.194559] io scheduler kyber registered [ 1.201505] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.204900] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.204978] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.205070] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.205144] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.205240] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.210905] scrncapt: init (heads:4 wins:6 planes:4) [ 1.211344] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.212511] EINJ: ACPI disabled. [ 1.216185] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.216210] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.216224] tegra-pmc: ### PMC reset level: L1 [ 1.216236] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.216293] tegra-pmc: PMC Prod config success [ 1.221870] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.241625] random: fast init done [ 1.250015] printk: console [ttyTCU0] enabled [ 2.779486] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.784018] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.788390] arm-smmu 10000000.iommu: stage 1 translation [ 2.794080] arm-smmu 10000000.iommu: stage 2 translation [ 2.799589] arm-smmu 10000000.iommu: nested translation [ 2.804929] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.812107] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.823632] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.824939] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.831793] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.839330] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.844827] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.849554] arm-smmu 12000000.iommu: stage 1 translation [ 2.855072] arm-smmu 12000000.iommu: stage 2 translation [ 2.860239] arm-smmu 12000000.iommu: nested translation [ 2.865919] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.872842] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.884492] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.886187] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.892553] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.900285] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.910175] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.912974] tegra_profiler: auth: init [ 2.917429] THERMAL EST: found 3 subdevs [ 2.920898] THERMAL EST num_resources: 0 [ 2.924465] [THERMAL EST subdev 0] [ 2.928040] [THERMAL EST subdev 1] [ 2.931450] [THERMAL EST subdev 2] [ 2.934412] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.940924] THERMAL EST: thz register success. [ 2.945143] THERMAL EST: end of probe, return err: 0 [ 2.950867] nvsciipc: loaded module [ 2.957942] tun: Universal TUN/TAP device driver, 1.6 [ 2.960251] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.966218] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.971767] e1000e: Intel(R) PRO/1000 Network Driver [ 2.976944] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.982855] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.988087] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.994279] PPP generic driver version 2.4.2 [ 2.998785] PPP BSD Compression module registered [ 3.003029] PPP Deflate Compression module registered [ 3.008543] PPP MPPE Compression module registered [ 3.013301] usbcore: registered new interface driver r8152 [ 3.019082] usbcore: registered new interface driver asix [ 3.024148] usbcore: registered new interface driver ax88179_178a [ 3.030527] usbcore: registered new interface driver cdc_ether [ 3.036219] usbcore: registered new interface driver net1080 [ 3.041818] usbcore: registered new interface driver cdc_subset [ 3.047860] usbcore: registered new interface driver zaurus [ 3.053559] usbcore: registered new interface driver cdc_ncm [ 3.059499] usbcore: registered new interface driver aqc111 [ 3.065113] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.071214] ohci-pci: OHCI PCI platform driver [ 3.075259] ohci-platform: OHCI generic platform driver [ 3.081254] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.087896] usbcore: registered new interface driver uas [ 3.091565] usbcore: registered new interface driver usb-storage [ 3.097972] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.103949] mousedev: PS/2 mouse device common for all mice [ 3.108694] usbcore: registered new interface driver xpad [ 3.117036] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.119453] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.127489] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.134047] i2c /dev entries driver [ 3.137373] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.143230] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.148603] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.153967] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.159235] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.164703] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.170206] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.185126] device-mapper: uevent: version 1.0.3 [ 3.185663] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.190606] cpuidle: Initializing cpuidle driver [ 3.194090] sdhci: Secure Digital Host Controller Interface driver [ 3.199033] sdhci: Copyright(c) Pierre Ossman [ 3.203388] Synopsys Designware Multimedia Card Interface Driver [ 3.209543] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.215482] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.216206] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.228315] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.247114] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.256277] vdd-1v0: supplied by regulator-dummy [ 3.261654] vdd-1v8-hs: supplied by regulator-dummy [ 3.266351] vdd-1v8-ls: supplied by regulator-dummy [ 3.271081] vdd-1v8-ao: supplied by regulator-dummy [ 3.274898] vddio-ddr-1v1: supplied by regulator-dummy [ 3.279221] vdd-rtc: supplied by regulator-dummy [ 3.280857] spmic-ldo1: supplied by regulator-dummy [ 3.282022] vdd-ao-3v3: supplied by regulator-dummy [ 3.288170] vddio-emmc-3v3: supplied by regulator-dummy [ 3.294292] spmic-ldo4: supplied by regulator-dummy [ 3.295529] vdd-usb-3v3: supplied by regulator-dummy [ 3.301658] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.307758] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.313224] spmic-ldo8: supplied by vdd-1v8-ls [ 3.314572] gpio-510 (gpio_default): hogged as output/high [ 3.315941] gpio-511 (gpio_default): hogged as output/high [ 3.322235] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.455484] max77686-rtc max77620-rtc: registered as rtc0 [ 3.456465] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.456771] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.193711] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.194733] hid: raw HID events driver (C) Jiri Kosina [ 4.195489] usbcore: registered new interface driver usbhid [ 4.195636] usbhid: USB HID core driver [ 4.197340] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.198542] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.196330] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.271922] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 76.400 ms) ÿá[ 4.283525] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.284099] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.285210] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.286018] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.287860] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.288481] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.289067] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.290269] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.290604] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.292775] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.300286] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.306420] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.311962] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.318315] denver_knobs_init:MTS_VERSION:55637613 [ 4.331098] t19x_cache tegra-cache: probed [ 4.334018] optee: probing for conduit method. [ 4.334969] optee: revision 3.16 (65cc2218) [ 4.336142] optee: dynamic shared memory is enabled [ 4.338645] optee: initialized driver [ 4.344820] nvpmodel: initialized successfully [ 4.346179] tegra_hv: get_hvd: not initialized yet [ 4.350959] user_ivc_mempool: hypervisor not present [ 4.357278] usbcore: registered new interface driver snd-usb-audio [ 4.363889] u32 classifier [ 4.364718] input device check on [ 4.368536] Actions configured [ 4.372264] Initializing XFRM netlink socket [ 4.376892] NET: Registered protocol family 10 [ 4.383662] Segment Routing with IPv6 [ 4.384309] NET: Registered protocol family 17 [ 4.388603] NET: Registered protocol family 15 [ 4.393337] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.406679] Bluetooth: RFCOMM socket layer initialized [ 4.411501] Bluetooth: RFCOMM ver 1.11 [ 4.415176] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.421295] Bluetooth: HIDP socket layer initialized [ 4.426957] 9pnet: Installing 9P2000 support [ 4.430410] Key type dns_resolver registered [ 4.436331] registered taskstats version 1 [ 4.438916] Loading compiled-in X.509 certificates [ 4.451676] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.454724] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.465136] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.466872] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.475659] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.484027] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.598859] tegra194-pcie 14160000.pcie: Link up [ 4.601947] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.602265] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.602410] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.602636] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.602859] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.603202] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.603631] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.616773] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.617344] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.617759] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.619337] pci 0004:01:00.0: supports D1 D2 [ 4.619479] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.628545] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.628888] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.629160] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.629570] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.629844] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.630011] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.633790] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.641093] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.649363] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.659716] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.664476] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.669954] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.676949] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.686180] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.687658] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.695847] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.704509] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.816154] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.816757] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.817051] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.817321] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.817650] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.817921] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.818290] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.818877] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.839442] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.839679] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.841320] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.842524] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.843807] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.845130] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.846173] pci 0005:00:00.0: Removing from iommu group 7 [ 5.846463] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.879816] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.904045] host1x 13e10000.host1x: initialized [ 5.905616] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.906430] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.907876] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.908487] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.909752] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.910332] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.911461] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.912150] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.913162] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.916329] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.926282] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.933082] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.943243] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.950364] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.960006] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.967256] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.977438] falcon 15340000.vic: Adding to iommu group 17 [ 5.991168] falcon 15340000.vic: initialized [ 5.992189] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.997719] falcon 15380000.nvjpg: initialized [ 5.998357] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.010742] falcon 154c0000.nvenc: initialized [ 6.011380] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.020349] falcon 15a80000.nvenc1: initialized [ 6.020922] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.032793] nvdec 15480000.nvdec: initialized [ 6.033384] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.043003] nvdec 15140000.nvdec1: initialized [ 6.043490] tsec 15500000.tsec: Adding to iommu group 18 [ 6.049575] tsec 15500000.tsec: initialized [ 6.050156] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.058212] tsec 15100000.tsecb: initialized [ 6.061967] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.090428] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.102318] gpio-374 (wifi-enable): hogged as output/high [ 6.102600] gpio-431 (camera-control-output-low): hogged as output/low [ 6.102944] gpio-432 (camera-control-output-low): hogged as output/low [ 6.104965] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.107233] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.107834] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.109401] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.113773] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.119422] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.124981] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.133832] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.140633] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.152250] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.157623] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.163475] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.172337] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.181290] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.188661] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.196306] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.202389] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.212212] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.218246] pva 16000000.pva0: Adding to iommu group 22 [ 6.244892] pva 16000000.pva0: initialized [ 6.249293] pva 16800000.pva1: Adding to iommu group 23 [ 6.261546] pva 16800000.pva1: initialized [ 6.265906] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.279398] nvdla 15880000.nvdla0: initialized [ 6.280762] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.290343] nvdla 158c0000.nvdla1: initialized [ 6.295277] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.295435] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.295741] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.295931] tegradc 15200000.display: Adding to iommu group 26 [ 6.296058] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.296554] tegradccommon 15200000.display-hub: dma mapping done [ 6.297423] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.302965] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.305402] tegradc 15210000.display: Adding to iommu group 26 [ 6.306204] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.306358] generic_infoframe_type: 0x87 [ 6.306518] tegradc 15200000.display: DT parsed successfully [ 6.306626] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.308192] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.315628] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.320230] tegra_cec 3960000.tegra_cec: probed [ 6.324037] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.331537] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.337698] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.338790] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.346401] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.351642] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.353243] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.356854] kfuse 3830000.kfuse: initialized [ 6.368518] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.372015] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.379348] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.384573] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.393488] tegradc 15210000.display: disp0 connected to head1->sor [ 6.398972] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.408950] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.426291] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.433417] tegradc 15210000.display: DT parsed successfully [ 6.441644] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.446097] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.468301] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.497305] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.502712] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.522712] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.523124] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.525901] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.534852] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.542927] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.549909] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.557081] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.564275] usb usb1: Product: xHCI Host Controller [ 6.569457] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.575812] usb usb1: SerialNumber: 3610000.xhci [ 6.581757] hub 1-0:1.0: USB hub found [ 6.584134] hub 1-0:1.0: 4 ports detected [ 6.588858] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.593460] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.601330] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.609004] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.616928] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.624158] usb usb2: Product: xHCI Host Controller [ 6.628868] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.635149] usb usb2: SerialNumber: 3610000.xhci [ 6.640661] hub 2-0:1.0: USB hub found [ 6.643599] hub 2-0:1.0: 4 ports detected [ 6.688334] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.695252] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.696813] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.697023] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.710513] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.711628] tegra194-cpufreq ccplex: probed with BWMGR [ 6.712837] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.713269] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.713721] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.714936] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.723069] tegra194-vi5 15c10000.vi: initialized [ 6.724307] tegradc 15210000.display: disp0 connected to head1->sor [ 6.724631] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.725363] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.730811] tegradc 15210000.display: DT parsed successfully [ 6.737054] mmc0: CQHCI version 5.10 [ 6.742862] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.743203] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.743209] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.743216] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.743220] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.743224] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.750820] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.754239] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.762318] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.768630] generic_infoframe_type: 0x87 [ 6.773417] random: crng init done [ 6.773579] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.775246] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.776570] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.782123] tegradc 15200000.display: DT parsed successfully [ 6.795073] tegradc 15200000.display: Display dc.000000004856ffff registered with id=0 [ 6.809118] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.812278] nvethernet 2490000.ethernet: Macsec not supported [ 6.813790] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.815602] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.824298] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.830296] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.830672] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.837833] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.843146] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.843632] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.851688] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.857356] mmc0: Command Queue Engine enabled [ 6.857361] mmc0: periodic cache flush enabled [ 6.857373] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.857892] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.858014] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.859873] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.861779] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.864160] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.864165] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.866314] tegradc 15200000.display: probed [ 6.866817] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.868386] tegra-se-nvhost 15810000.se: initialized [ 6.873552] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.012144] Console: switching to colour frame buffer device 240x67 [ 7.012412] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.017893] tegradc 15200000.display: fb registered [ 7.017967] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.024601] tegra-se-nvhost 15820000.se: initialized [ 7.029725] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.036261] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.039650] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.046199] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.058559] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.064931] tegra-se-nvhost 15830000.se: initialized [ 7.072053] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.072061] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.072064] usb 1-2: Manufacturer: Generic [ 7.074207] hub 1-2:1.0: USB hub found [ 7.078263] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.085436] hub 1-2:1.0: 4 ports detected [ 7.089722] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.114743] tegra-se-nvhost 15840000.se: initialized [ 7.118324] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.120361] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.128759] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.134971] tegra_actmon d230000.actmon: in actmon_register()... [ 7.141451] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.147388] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.155784] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.160641] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.167677] Extcon AUX1(HDMI) enable [ 7.167806] tegradc 15210000.display: disp1 connected to head1->sor [ 7.175831] hvc_sysfs: hypervisor is not present [ 7.179303] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.197277] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.201605] tegradc 15210000.display: DT parsed successfully [ 7.210443] tegradc 15210000.display: Display dc.00000000d2d2bb88 registered with id=1 [ 7.229096] ALSA device list: [ 7.229190] No soundcards found. [ 7.229557] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.231078] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.244510] tegradc 15210000.display: probed [ 7.244900] tegradc 15210000.display: fb registered [ 7.246576] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.249931] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.254931] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.254936] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.254944] usb 2-3: Manufacturer: Generic [ 7.257096] Freeing unused kernel memory: 3968K [ 7.262506] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.278997] Run /init as init process [ 7.283459] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.299803] tegradc 15210000.display: blank - powerdown [ 7.305172] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.313290] Extcon DP: HPD disabled [ 7.316921] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.323635] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.329514] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.330833] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.336207] hub 2-3:1.0: USB hub found [ 7.342828] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.348410] hub 2-3:1.0: 4 ports detected [ 7.351234] Root device found: mmcblk0p1 [ 7.353363] Found dev node: /dev/mmcblk0p1 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.364681] tegradc 15200000.display: blank - powerdown [ 7.366801] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.401908] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.402074] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.402077] Extcon AUX1(HDMI) disable [ 7.405971] Rootfs mounted over mmcblk0p1 [ 7.425603] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.426531] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.440298] tegradc 15200000.display: unblank [ 7.441376] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.441700] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.442861] Switching from initrd to actual rootfs [ 7.447974] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.449944] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.453963] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.453966] Extcon AUX1(HDMI) enable [ 7.466706] tegradc 15200000.display: sync windows ret = 247 [ 7.500672] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.502284] Extcon HDMI: HPD enabled [ 7.503770] tegradc 15200000.display: hdmi: plugged [ 7.516077] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.517573] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.518976] usb 1-3: Product: Bluetooth Radio [ 7.520279] usb 1-3: Manufacturer: Realtek [ 7.521562] usb 1-3: SerialNumber: 00e04c000001 [ 7.585855] systemd[1]: System time before build time, advancing clock. [ 7.656604] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.661499] systemd[1]: Detected architecture arm64. [ 7.702927] systemd[1]: Set hostname to . [ 7.862630] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.204088] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.205784] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.211524] systemd[1]: Created slice system-modprobe.slice. [ 8.216273] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.220519] systemd[1]: Created slice User and Session Slice. [ 8.223968] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.228183] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.231549] systemd[1]: Reached target User and Group Name Lookups. [ 8.234730] systemd[1]: Reached target Slices. [ 8.237936] systemd[1]: Reached target Swap. [ 8.241907] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.245490] systemd[1]: Listening on Syslog Socket. [ 8.248956] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.252256] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.256527] systemd[1]: Listening on Journal Audit Socket. [ 8.260098] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.263797] systemd[1]: Listening on Journal Socket. [ 8.267468] systemd[1]: Listening on udev Control Socket. [ 8.270894] systemd[1]: Listening on udev Kernel Socket. [ 8.279139] systemd[1]: Mounting Huge Pages File System... [ 8.288739] systemd[1]: Mounting POSIX Message Queue File System... [ 8.297024] systemd[1]: Mounting RPC Pipe File System... [ 8.305622] systemd[1]: Mounting Kernel Debug File System... [ 8.314386] systemd[1]: Mounting Kernel Trace File System... [ 8.324160] systemd[1]: Starting Journal Service... [ 8.333174] systemd[1]: Starting Set the console keyboard layout... [ 8.341286] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.346270] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.352954] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.362279] systemd[1]: Started Nameserver information manager. [ 8.366468] systemd[1]: Reached target Network (Pre). [ 8.372959] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.375082] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.383004] systemd[1]: Starting Load Kernel Modules... [ 8.390818] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.399273] systemd[1]: Starting udev Coldplug all Devices... [ 8.409808] systemd[1]: Mounted Huge Pages File System. [ 8.413535] systemd[1]: Mounted POSIX Message Queue File System. [ 8.417236] systemd[1]: Mounted RPC Pipe File System. [ 8.422192] systemd[1]: Mounted Kernel Debug File System. [ 8.425365] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.425439] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.425833] systemd[1]: Mounted Kernel Trace File System. [ 8.430465] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.430471] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.430480] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.430483] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.430953] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.431097] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.434908] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.435535] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.453609] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.459469] systemd[1]: nvfb-udev.service: Succeeded. [ 8.463500] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.475742] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.480769] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.482461] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.496769] systemd[1]: Starting Load/Save Random Seed... [ 8.506147] systemd[1]: Starting Create System Users... [ 8.541952] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.541952] [ 8.562674] systemd[1]: Finished Load/Save Random Seed. [ 8.569487] systemd[1]: Finished Create System Users. [ 8.576082] systemd[1]: Finished Load Kernel Modules. [ 8.580382] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.586995] systemd[1]: Mounting Kernel Configuration File System... [ 8.596054] systemd[1]: Started OP-TEE Client Supplicant. [ 8.604385] systemd[1]: Starting Apply Kernel Variables... [ 8.611791] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.620416] systemd[1]: Mounted Kernel Configuration File System. [ 8.632268] systemd[1]: Finished Set the console keyboard layout. [ 9.930253] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.938516] imx219 9-0010: board setup failed [ 9.938622] imx219: probe of 9-0010 failed with error -121 [ 9.951876] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.957066] imx219 10-0010: board setup failed [ 9.958293] imx219: probe of 10-0010 failed with error -121 [ 10.041533] hot-surface-alert cooling state: 0 -> 1 [ 10.535108] using random self ethernet address [ 10.555427] using random host ethernet address [ 11.635667] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.637315] Creating 1 MTD partitions on "spi6.0": [ 11.638887] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.081153] using random self ethernet address [ 12.082725] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.777682] nvidia: loading out-of-tree module taints kernel. [ 58.808764] watchdog: watchdog0: watchdog did not stop! [ 59.239707] Trying to unregister non-registered hwtime source [ 62.297809] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.299434] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] tÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä ÿâfuse initialized hwwdt initialized ÿäNon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exteÿâec initialized ÿärÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿänalÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä DT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu ÿâclk_dt_late initialized ÿäAÿânoc_late initialized ÿäuÿâpm_post initialized dbells initialized ÿäg 1ÿâdmce initialized cvc initialized ÿä1 03:23:20 UTÿâavfs_clk_mach_post initialized ÿäC 20ÿâavfs_clk_platform_post initialized ÿä22ÿâcvc_late initialized regulator_post initialized ÿä aarcÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäh64 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.481] I> register 'maxim' power off handle [0003.483] I> virtual i2c enabled [0003.483] I> registered 'maxim,max20024' pmic [0003.483] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.636] I> edid read success [0003.648] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.649] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.650] I> width = 1360, height = 768, frequency = 85500000 [0003.650] I> width = 720, height = 480, frequency = 26973026 [0003.654] I> width = 720, height = 576, frequency = 26973026 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.688] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.748] calling apps_init() [0003.749] starting app kernel_boot_app [0003.750] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000666] Console: colour dummy device 80x25 [ 0.002183] printk: console [tty0] enabled [ 0.002248] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002282] pid_max: default: 32768 minimum: 301 [ 0.002501] LSM: Security Framework initializing [ 0.002560] Yama: becoming mindful. [ 0.002603] SELinux: Initializing. [ 0.002794] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002832] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005830] rcu: Hierarchical SRCU implementation. [ 0.006089] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006835] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006910] DTB Build time: Aug 10 2022 20:31:49 [ 0.009841] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010122] Remapping and enabling EFI services. [ 0.012299] smp: Bringing up secondary CPUs ... [ 0.041477] Detected PIPT I-cache on CPU1 [ 0.041597] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074169] Detected PIPT I-cache on CPU2 [ 0.074316] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103737] Detected PIPT I-cache on CPU3 [ 0.103868] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133524] Detected PIPT I-cache on CPU4 [ 0.133621] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163307] Detected PIPT I-cache on CPU5 [ 0.163461] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163770] smp: Brought up 1 node, 6 CPUs [ 0.164170] SMP: Total of 6 processors activated. [ 0.164256] CPU features: detected: Privileged Access Never [ 0.164297] CPU features: detected: LSE atomic instructions [ 0.164330] CPU features: detected: User Access Override [ 0.164359] CPU features: detected: 32-bit EL0 Support [ 0.164386] CPU features: detected: RAS Extension Support [ 0.164413] CPU features: detected: CRC32 instructions [ 0.164441] CPU features: detected: 32-bit EL1 Support [ 0.234091] CPU: All CPU(s) started at EL2 [ 0.241426] devtmpfs: initialized [ 0.294524] Registered cp15_barrier emulation handler [ 0.294676] Registered setend emulation handler [ 0.294709] KASLR enabled [ 0.294998] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.295073] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.296361] pinctrl core: initialized pinctrl subsystem [ 0.297511] SMBIOS 3.0.0 present. [ 0.297548] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.298227] NET: Registered protocol family 16 [ 0.300132] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.300665] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.301438] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.301527] audit: initializing netlink subsys (disabled) [ 0.301829] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.302266] thermal_sys: Registered thermal governor 'step_wise' [ 0.302273] thermal_sys: Registered thermal governor 'power_allocator' [ 0.302304] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.304736] cpuidle: using governor menu [ 0.305042] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.305513] ASID allocator initialised with 32768 entries [ 0.305774] Serial: AMBA PL011 UART driver [ 0.308857] Tegra reboot handler registered. [ 0.376103] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.376317] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.376494] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376540] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376661] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376707] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376820] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.376879] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.377037] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.377081] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379569] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379614] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.379639] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379662] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379688] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379711] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379734] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379757] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379780] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379803] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379825] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379848] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379872] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379898] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379921] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.380001] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.380050] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.380158] mc-err: mcerr ops are set to t19x [ 0.392041] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392086] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.392101] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392115] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399499] ACPI: Interpreter disabled. [ 0.401188] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.402978] iommu: Default domain type: Translated [ 0.403067] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.403527] SCSI subsystem initialized [ 0.403798] usbcore: registered new interface driver usbfs [ 0.403855] usbcore: registered new interface driver hub [ 0.403933] usbcore: registered new device driver usb [ 0.404425] mc: Linux media interface: v0.10 [ 0.404470] videodev: Linux video capture interface: v2.00 [ 0.404848] pps_core: LinuxPPS API ver. 1 registered [ 0.404867] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.404897] PTP clock support registered [ 0.405159] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.405637] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.405753] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.406496] Registered efivars operations [ 0.413824] FPGA manager framework [ 0.413995] Advanced Linux Sound Architecture Driver Initialized. [ 0.414809] Bluetooth: Core ver 2.22 [ 0.414889] NET: Registered protocol family 31 [ 0.414907] Bluetooth: HCI device and connection manager initialized [ 0.414929] Bluetooth: HCI socket layer initialized [ 0.414947] Bluetooth: L2CAP socket layer initialized [ 0.415006] Bluetooth: SCO socket layer initialized [ 0.416690] camchar: rtcpu character device driver loaded [ 0.417511] clocksource: Switched to clocksource arch_sys_counter [ 0.820515] VFS: Disk quotas dquot_6.6.0 [ 0.820626] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.821042] pnp: PnP ACPI: disabled [ 0.834629] la/ptsa driver initialized. [ 0.834818] NET: Registered protocol family 2 [ 0.835024] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.844148] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.844241] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.844626] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.845260] TCP: Hash tables configured (established 65536 bind 65536) [ 0.845419] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.845587] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.845902] NET: Registered protocol family 1 [ 0.846756] RPC: Registered named UNIX socket transport module. [ 0.846792] RPC: Registered udp transport module. [ 0.846807] RPC: Registered tcp transport module. [ 0.846821] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.846847] PCI: CLS 0 bytes, default 64 [ 0.847142] Trying to unpack rootfs image as initramfs... [ 1.119207] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.122514] Freeing initrd memory: 8196K [ 1.126579] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.126617] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.126674] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.126975] kvm [1]: IPA Size Limit: 40 bits [ 1.127417] kvm [1]: vgic interrupt IRQ9 [ 1.127934] kvm [1]: VHE mode initialized successfully [ 1.129309] Initialise system trusted keyrings [ 1.129611] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.135326] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.136143] NFS: Registering the id_resolver key type [ 1.136178] Key type id_resolver registered [ 1.136193] Key type id_legacy registered [ 1.136295] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.136319] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.136356] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.146042] NET: Registered protocol family 38 [ 1.146065] Key type asymmetric registered [ 1.146080] Asymmetric key parser 'x509' registered [ 1.146121] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.146344] io scheduler mq-deadline registered [ 1.146362] io scheduler kyber registered [ 1.151990] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.154908] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.154987] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.155060] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.155131] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.155225] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.160864] scrncapt: init (heads:4 wins:6 planes:4) [ 1.160984] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.162145] EINJ: ACPI disabled. [ 1.165751] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.165777] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.165792] tegra-pmc: ### PMC reset level: L1 [ 1.165805] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.165860] tegra-pmc: PMC Prod config success [ 1.171599] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.177146] random: fast init done [ 1.177605] printk: console [ttyTCU0] enabled [ 2.729389] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.734060] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.738615] arm-smmu 10000000.iommu: stage 1 translation [ 2.743753] arm-smmu 10000000.iommu: stage 2 translation [ 2.749535] arm-smmu 10000000.iommu: nested translation [ 2.754641] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.761797] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.772021] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.775162] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.781491] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.789590] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.794776] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.799486] arm-smmu 12000000.iommu: stage 1 translation [ 2.804738] arm-smmu 12000000.iommu: stage 2 translation [ 2.810425] arm-smmu 12000000.iommu: nested translation [ 2.815593] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.822772] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.832775] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.835892] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.842710] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.849993] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.860089] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.862872] tegra_profiler: auth: init [ 2.867405] THERMAL EST: found 3 subdevs [ 2.870548] THERMAL EST num_resources: 0 [ 2.874646] [THERMAL EST subdev 0] [ 2.877713] [THERMAL EST subdev 1] [ 2.881364] [THERMAL EST subdev 2] [ 2.884374] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.890862] THERMAL EST: thz register success. [ 2.895081] THERMAL EST: end of probe, return err: 0 [ 2.900605] nvsciipc: loaded module [ 2.908063] tun: Universal TUN/TAP device driver, 1.6 [ 2.910447] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.916141] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.921949] e1000e: Intel(R) PRO/1000 Network Driver [ 2.926627] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.932977] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.938259] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.944535] PPP generic driver version 2.4.2 [ 2.948473] PPP BSD Compression module registered [ 2.953237] PPP Deflate Compression module registered [ 2.958491] PPP MPPE Compression module registered [ 2.963239] usbcore: registered new interface driver r8152 [ 2.969010] usbcore: registered new interface driver asix [ 2.974090] usbcore: registered new interface driver ax88179_178a [ 2.980204] usbcore: registered new interface driver cdc_ether [ 2.986152] usbcore: registered new interface driver net1080 [ 2.991755] usbcore: registered new interface driver cdc_subset [ 2.998052] usbcore: registered new interface driver zaurus [ 3.003754] usbcore: registered new interface driver cdc_ncm [ 3.009424] usbcore: registered new interface driver aqc111 [ 3.015109] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.020882] ohci-pci: OHCI PCI platform driver [ 3.025440] ohci-platform: OHCI generic platform driver [ 3.031304] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.037392] usbcore: registered new interface driver uas [ 3.041532] usbcore: registered new interface driver usb-storage [ 3.047911] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.053645] mousedev: PS/2 mouse device common for all mice [ 3.058918] usbcore: registered new interface driver xpad [ 3.066872] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.069601] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.077172] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.083789] i2c /dev entries driver [ 3.087090] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.092926] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.098193] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.103542] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.109130] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.114715] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.119858] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.133347] device-mapper: uevent: version 1.0.3 [ 3.133899] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.140349] cpuidle: Initializing cpuidle driver [ 3.144541] sdhci: Secure Digital Host Controller Interface driver [ 3.149238] sdhci: Copyright(c) Pierre Ossman [ 3.153079] Synopsys Designware Multimedia Card Interface Driver [ 3.159533] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.165549] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.166323] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.178780] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.200652] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.210543] vdd-1v0: supplied by regulator-dummy [ 3.216100] vdd-1v8-hs: supplied by regulator-dummy [ 3.220963] vdd-1v8-ls: supplied by regulator-dummy [ 3.225814] vdd-1v8-ao: supplied by regulator-dummy [ 3.229840] vddio-ddr-1v1: supplied by regulator-dummy [ 3.234438] vdd-rtc: supplied by regulator-dummy [ 3.236233] spmic-ldo1: supplied by regulator-dummy [ 3.237556] vdd-ao-3v3: supplied by regulator-dummy [ 3.243805] vddio-emmc-3v3: supplied by regulator-dummy [ 3.250308] spmic-ldo4: supplied by regulator-dummy [ 3.251520] vdd-usb-3v3: supplied by regulator-dummy [ 3.257682] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.263924] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.269436] spmic-ldo8: supplied by vdd-1v8-ls [ 3.271043] gpio-510 (gpio_default): hogged as output/high [ 3.272429] gpio-511 (gpio_default): hogged as output/high [ 3.275287] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.411761] max77686-rtc max77620-rtc: registered as rtc0 [ 3.413150] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.413552] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.244631] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.245825] hid: raw HID events driver (C) Jiri Kosina [ 4.246784] usbcore: registered new interface driver usbhid [ 4.246932] usbhid: USB HID core driver [ 4.249267] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.250643] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.099745] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.173681] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.744 ms) ÿá[ 4.334746] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.335341] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.336253] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.337010] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.338772] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.339454] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.340089] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.341678] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.341925] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.344785] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.351116] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.357109] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.362552] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.368379] denver_knobs_init:MTS_VERSION:55637613 [ 4.381104] t19x_cache tegra-cache: probed [ 4.384171] optee: probing for conduit method. [ 4.385013] optee: revision 3.16 (65cc2218) [ 4.386035] optee: dynamic shared memory is enabled [ 4.389635] optee: initialized driver [ 4.396485] nvpmodel: initialized successfully [ 4.397212] tegra_hv: get_hvd: not initialized yet [ 4.402044] user_ivc_mempool: hypervisor not present [ 4.408907] usbcore: registered new interface driver snd-usb-audio [ 4.414818] u32 classifier [ 4.415664] input device check on [ 4.419565] Actions configured [ 4.422800] Initializing XFRM netlink socket [ 4.427951] NET: Registered protocol family 10 [ 4.435010] Segment Routing with IPv6 [ 4.435324] NET: Registered protocol family 17 [ 4.439355] NET: Registered protocol family 15 [ 4.443999] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.457971] Bluetooth: RFCOMM socket layer initialized [ 4.462489] Bluetooth: RFCOMM ver 1.11 [ 4.466165] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.471766] Bluetooth: HIDP socket layer initialized [ 4.478060] 9pnet: Installing 9P2000 support [ 4.481106] Key type dns_resolver registered [ 4.486980] registered taskstats version 1 [ 4.489584] Loading compiled-in X.509 certificates [ 4.502447] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.505337] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.515728] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.517564] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.526339] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.534581] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.649561] tegra194-pcie 14160000.pcie: Link up [ 4.652696] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.652968] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.653102] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.653348] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.653596] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.654055] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.654529] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.667917] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.668425] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.668872] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.670481] pci 0004:01:00.0: supports D1 D2 [ 4.670713] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.682208] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.682485] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.682868] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.683278] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.683571] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.683954] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.684298] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.691538] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.700285] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.710738] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.715072] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.720858] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.728014] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.737218] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.738175] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.746518] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.755211] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.857688] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.858459] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.858689] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.858848] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.859082] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.859337] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.859709] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.860259] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.884035] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.884490] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.886762] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.888176] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.889957] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.891726] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.892684] pci 0005:00:00.0: Removing from iommu group 7 [ 5.892940] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.928983] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.955312] host1x 13e10000.host1x: initialized [ 5.957284] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.958354] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.959780] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.960531] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.962079] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.962760] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.963849] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.964498] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.965606] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.966208] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.967890] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.974686] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.984969] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.991591] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.001716] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.008649] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.018757] falcon 15340000.vic: Adding to iommu group 17 [ 6.033096] falcon 15340000.vic: initialized [ 6.034018] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.039217] falcon 15380000.nvjpg: initialized [ 6.039749] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.051645] falcon 154c0000.nvenc: initialized [ 6.052225] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.062566] falcon 15a80000.nvenc1: initialized [ 6.063221] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.074349] nvdec 15480000.nvdec: initialized [ 6.075048] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.085063] nvdec 15140000.nvdec1: initialized [ 6.085637] tsec 15500000.tsec: Adding to iommu group 18 [ 6.091414] tsec 15500000.tsec: initialized [ 6.091869] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.098654] tsec 15100000.tsecb: initialized [ 6.102843] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.130607] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.143876] gpio-374 (wifi-enable): hogged as output/high [ 6.144156] gpio-431 (camera-control-output-low): hogged as output/low [ 6.144449] gpio-432 (camera-control-output-low): hogged as output/low [ 6.146405] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.148631] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.149250] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.150909] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.155315] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.161214] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.166809] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.175381] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.182394] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.194262] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.199126] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.204983] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.213594] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.223110] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.230569] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.238289] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.244169] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.253941] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.260157] pva 16000000.pva0: Adding to iommu group 22 [ 6.287976] pva 16000000.pva0: initialized [ 6.288239] random: crng init done [ 6.293454] pva 16800000.pva1: Adding to iommu group 23 [ 6.314049] pva 16800000.pva1: initialized [ 6.318254] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.332355] nvdla 15880000.nvdla0: initialized [ 6.334030] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.343180] nvdla 158c0000.nvdla1: initialized [ 6.347426] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.347715] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.347770] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.348114] tegradccommon 15200000.display-hub: dma mapping done [ 6.348360] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.349918] tegradc 15210000.display: Adding to iommu group 26 [ 6.349950] tegradc 15200000.display: Adding to iommu group 26 [ 6.350103] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.353145] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.359263] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.360500] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.364515] tegra_cec 3960000.tegra_cec: probed [ 6.365994] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.371760] generic_infoframe_type: 0x87 [ 6.378578] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.381405] tegradc 15200000.display: DT parsed successfully [ 6.385644] kfuse 3830000.kfuse: initialized [ 6.391980] tegradc 15200000.display: Display dc.000000009c3c74ca registered with id=0 [ 6.398343] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.407102] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.409944] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.410726] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.416568] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.416591] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.426052] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.432119] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.438771] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.445249] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.454501] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.463994] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.469300] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.477958] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.481221] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.490638] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.512986] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.523905] tegradc 15210000.display: disp0 connected to head1->sor [ 6.528705] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.528817] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.538713] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.545734] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.550446] tegradc 15210000.display: DT parsed successfully [ 6.557654] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.565063] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.594592] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.601906] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.609021] usb usb1: Product: xHCI Host Controller [ 6.614273] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.620436] usb usb1: SerialNumber: 3610000.xhci [ 6.626432] hub 1-0:1.0: USB hub found [ 6.629186] hub 1-0:1.0: 4 ports detected [ 6.634251] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.638878] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.646158] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.653998] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.661589] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.668864] usb usb2: Product: xHCI Host Controller [ 6.674066] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.680313] usb usb2: SerialNumber: 3610000.xhci [ 6.685926] hub 2-0:1.0: USB hub found [ 6.688560] hub 2-0:1.0: 4 ports detected [ 6.732824] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.739273] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.740794] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.741044] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.754273] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.755455] tegra194-cpufreq ccplex: probed with BWMGR [ 6.756651] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.757143] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.757611] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.758794] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.765886] tegra194-vi5 15c10000.vi: initialized [ 6.767576] tegradc 15210000.display: disp0 connected to head1->sor [ 6.767628] mmc0: CQHCI version 5.10 [ 6.768766] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.769033] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.769234] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.769240] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.769249] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.769254] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.769258] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.777592] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.779681] tegradc 15210000.display: DT parsed successfully [ 6.785922] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.793597] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.793672] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.800357] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.801246] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.806998] generic_infoframe_type: 0x87 [ 6.814532] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.819991] tegradc 15200000.display: DT parsed successfully [ 6.832313] tegradc 15200000.display: Display dc.0000000028c1303c registered with id=0 [ 6.847328] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.853274] nvethernet 2490000.ethernet: Macsec not supported [ 6.860171] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.860198] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.868956] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.872202] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.880507] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.884488] mmc0: Command Queue Engine enabled [ 6.884493] mmc0: periodic cache flush enabled [ 6.884508] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.885012] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.885122] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.885217] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.889166] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.893155] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.897515] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.901565] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.906898] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.916414] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.924494] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.931219] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.933450] tegradc 15200000.display: probed [ 6.938868] tegra-se-nvhost 15810000.se: initialized [ 7.047021] Console: switching to colour frame buffer device 240x67 [ 7.051853] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.053219] tegradc 15200000.display: fb registered [ 7.059994] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.064476] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.069415] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.069421] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.069425] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.069428] usb 1-2: Manufacturer: Generic [ 7.071377] tegra-se-nvhost 15820000.se: initialized [ 7.071757] hub 1-2:1.0: USB hub found [ 7.072801] hub 1-2:1.0: 4 ports detected [ 7.077190] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.086406] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.091913] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.096977] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.138547] tegra-se-nvhost 15830000.se: initialized [ 7.143703] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.149599] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.155668] tegra-se-nvhost 15840000.se: initialized [ 7.161789] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.167515] tegra_actmon d230000.actmon: in actmon_register()... [ 7.169684] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.172137] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.181921] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.186475] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.186482] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.187060] hvc_sysfs: hypervisor is not present [ 7.193994] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.214393] ALSA device list: [ 7.215360] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.215364] Extcon AUX1(HDMI) enable [ 7.215518] tegradc 15210000.display: disp1 connected to head1->sor [ 7.215666] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.215739] tegradc 15210000.display: DT parsed successfully [ 7.215784] tegradc 15210000.display: Display dc.0000000039ddac68 registered with id=1 [ 7.215922] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.215928] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.222630] tegradc 15210000.display: probed [ 7.224944] No soundcards found. [ 7.283849] tegradc 15210000.display: fb registered [ 7.286928] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.291798] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.296623] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.296632] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.298245] Freeing unused kernel memory: 3968K [ 7.303797] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.303808] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.311170] usb 2-3: Manufacturer: Generic [ 7.339374] tegradc 15210000.display: blank - powerdown [ 7.343721] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.348380] hub 2-3:1.0: USB hub found [ 7.349621] Run /init as init process [ 7.351184] Extcon DP: HPD disabled [ 7.356950] hub 2-3:1.0: 4 ports detected [ 7.358423] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.362096] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.366435] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.372795] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.379492] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.398247] tegradc 15200000.display: blank - powerdown [ 7.401581] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.436781] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.436787] Extcon AUX1(HDMI) disable [ 7.460396] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.461407] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.470177] Root device found: mmcblk0p1 [ 7.472215] Found dev node: /dev/mmcblk0p1 [ 7.475404] tegradc 15200000.display: unblank [ 7.476540] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.476740] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.483919] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.485813] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.490420] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.490424] Extcon AUX1(HDMI) enable [ 7.502589] tegradc 15200000.display: sync windows ret = 247 [ 7.510017] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.535757] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.537240] Extcon HDMI: HPD enabled [ 7.538659] tegradc 15200000.display: hdmi: plugged [ 7.540036] Rootfs mounted over mmcblk0p1 [ 7.554747] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.556218] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.557685] usb 1-3: Product: Bluetooth Radio [ 7.559012] usb 1-3: Manufacturer: Realtek [ 7.560340] usb 1-3: SerialNumber: 00e04c000001 [ 7.586896] Switching from initrd to actual rootfs [ 7.736296] systemd[1]: System time before build time, advancing clock. [ 7.806508] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.811294] systemd[1]: Detected architecture arm64. [ 7.852383] systemd[1]: Set hostname to . [ 8.020616] systemd-sysv-generator[251]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.374812] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.376441] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.382091] systemd[1]: Created slice system-modprobe.slice. [ 8.386621] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.390685] systemd[1]: Created slice User and Session Slice. [ 8.393975] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.398033] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.401231] systemd[1]: Reached target User and Group Name Lookups. [ 8.404356] systemd[1]: Reached target Slices. [ 8.407373] systemd[1]: Reached target Swap. [ 8.411176] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.414660] systemd[1]: Listening on Syslog Socket. [ 8.418056] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.421243] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.425366] systemd[1]: Listening on Journal Audit Socket. [ 8.428867] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.432601] systemd[1]: Listening on Journal Socket. [ 8.437634] systemd[1]: Listening on udev Control Socket. [ 8.442143] systemd[1]: Listening on udev Kernel Socket. [ 8.450936] systemd[1]: Mounting Huge Pages File System... [ 8.459561] systemd[1]: Mounting POSIX Message Queue File System... [ 8.467677] systemd[1]: Mounting RPC Pipe File System... [ 8.476182] systemd[1]: Mounting Kernel Debug File System... [ 8.484592] systemd[1]: Mounting Kernel Trace File System... [ 8.494318] systemd[1]: Starting Journal Service... [ 8.503477] systemd[1]: Starting Set the console keyboard layout... [ 8.511625] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.515092] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.521377] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.530675] systemd[1]: Started Nameserver information manager. [ 8.535394] systemd[1]: Reached target Network (Pre). [ 8.542035] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.543831] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.550258] systemd[1]: Starting Load Kernel Modules... [ 8.558176] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.566316] systemd[1]: Starting udev Coldplug all Devices... [ 8.577287] systemd[1]: Mounted Huge Pages File System. [ 8.580982] systemd[1]: Mounted POSIX Message Queue File System. [ 8.584802] systemd[1]: Mounted RPC Pipe File System. [ 8.586351] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.591243] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.593083] systemd[1]: Mounted Kernel Debug File System. [ 8.593648] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.595964] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.595978] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.595982] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.596254] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.597641] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.603206] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.603216] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.612441] systemd[1]: Mounted Kernel Trace File System. [ 8.622555] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.630307] systemd[1]: nvfb-udev.service: Succeeded. [ 8.634440] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.645412] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.658768] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.660547] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.667555] systemd[1]: Starting Load/Save Random Seed... [ 8.677578] systemd[1]: Starting Create System Users... [ 8.704963] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.704963] [ 8.722215] systemd[1]: Finished Load/Save Random Seed. [ 8.734659] systemd[1]: Finished Create System Users. [ 8.741618] systemd[1]: Finished Load Kernel Modules. [ 8.746343] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.754036] systemd[1]: Mounting Kernel Configuration File System... [ 8.762274] systemd[1]: Started OP-TEE Client Supplicant. [ 8.771231] systemd[1]: Starting Apply Kernel Variables... [ 8.780117] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.790696] systemd[1]: Finished Set the console keyboard layout. [ 8.794790] systemd[1]: Mounted Kernel Configuration File System. [ 10.279155] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.309080] imx219 9-0010: board setup failed [ 10.310461] imx219: probe of 9-0010 failed with error -121 [ 10.360158] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.367073] imx219 10-0010: board setup failed [ 10.368442] imx219: probe of 10-0010 failed with error -121 [ 10.414509] hot-surface-alert cooling state: 0 -> 1 [ 11.132079] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.133409] Creating 1 MTD partitions on "spi6.0": [ 11.133429] 0x000000000000-0x000002000000 : "Whole_flash0" [ 11.310591] using random self ethernet address [ 11.311770] using random host ethernet address [ 12.564952] using random self ethernet address [ 12.569612] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.864037] nvidia: loading out-of-tree module taints kernel. [ 59.630920] watchdog: watchdog0: watchdog did not stop! [ 60.119194] Trying to unregister non-registered hwtime source [ 63.180328] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.181851] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERRýÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 69500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized noc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 aÿâavfs_clk_platform_post initialized ÿäarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNING:ÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.643] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.644] I> width = 1920, height = 1080, frequency = 148500000 [0003.644] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.645] I> width = 720, height = 480, frequency = 26973026 [0003.649] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.688] I> width = 3840, height = 2160, frequency = 296703296 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.717] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.733] I> hdmi_enable, HDMI initialisation complete [0003.743] initializing target [0003.743] calling apps_init() [0003.744] starting app kernel_boot_app [0003.745] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b08c0000-0x00000000c08c0000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000650] Console: colour dummy device 80x25 [ 0.002074] printk: console [tty0] enabled [ 0.002137] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002172] pid_max: default: 32768 minimum: 301 [ 0.002333] LSM: Security Framework initializing [ 0.002391] Yama: becoming mindful. [ 0.002433] SELinux: Initializing. [ 0.002576] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002620] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005603] rcu: Hierarchical SRCU implementation. [ 0.005844] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006564] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006626] DTB Build time: Aug 10 2022 20:31:49 [ 0.009257] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009482] Remapping and enabling EFI services. [ 0.011597] smp: Bringing up secondary CPUs ... [ 0.040845] Detected PIPT I-cache on CPU1 [ 0.040949] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070425] Detected PIPT I-cache on CPU2 [ 0.070573] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100201] Detected PIPT I-cache on CPU3 [ 0.100291] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130028] Detected PIPT I-cache on CPU4 [ 0.130190] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.159863] Detected PIPT I-cache on CPU5 [ 0.160006] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160394] smp: Brought up 1 node, 6 CPUs [ 0.160583] SMP: Total of 6 processors activated. [ 0.160621] CPU features: detected: Privileged Access Never [ 0.160643] CPU features: detected: LSE atomic instructions [ 0.160656] CPU features: detected: User Access Override [ 0.160670] CPU features: detected: 32-bit EL0 Support [ 0.160683] CPU features: detected: RAS Extension Support [ 0.160695] CPU features: detected: CRC32 instructions [ 0.160708] CPU features: detected: 32-bit EL1 Support [ 0.230548] CPU: All CPU(s) started at EL2 [ 0.236948] devtmpfs: initialized [ 0.309263] Registered cp15_barrier emulation handler [ 0.309389] Registered setend emulation handler [ 0.309431] KASLR enabled [ 0.309853] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.309904] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.312028] pinctrl core: initialized pinctrl subsystem [ 0.313211] SMBIOS 3.0.0 present. [ 0.313256] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.314122] NET: Registered protocol family 16 [ 0.316806] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.317567] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.318670] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.318798] audit: initializing netlink subsys (disabled) [ 0.319116] audit: type=2000 audit(0.316:1): state=initialized audit_enabled=0 res=1 [ 0.319729] thermal_sys: Registered thermal governor 'step_wise' [ 0.319740] thermal_sys: Registered thermal governor 'power_allocator' [ 0.319772] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.323327] cpuidle: using governor menu [ 0.323885] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.324316] ASID allocator initialised with 32768 entries [ 0.324641] Serial: AMBA PL011 UART driver [ 0.329789] Tegra reboot handler registered. [ 0.429692] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.429845] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.430118] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.430214] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.430434] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.430498] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.430674] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.430736] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.430955] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.431042] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.434344] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.434417] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.434462] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.434519] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.434570] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.434607] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.434643] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.434678] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.434714] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.434758] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.434817] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.434854] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.434916] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.434972] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.435008] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.435044] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.435079] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.435218] mc-err: mcerr ops are set to t19x [ 0.453021] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.453054] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.453076] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.453098] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.462046] ACPI: Interpreter disabled. [ 0.463664] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.465415] iommu: Default domain type: Translated [ 0.465505] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.466082] SCSI subsystem initialized [ 0.466301] usbcore: registered new interface driver usbfs [ 0.466397] usbcore: registered new interface driver hub [ 0.466471] usbcore: registered new device driver usb [ 0.467020] mc: Linux media interface: v0.10 [ 0.467067] videodev: Linux video capture interface: v2.00 [ 0.467471] pps_core: LinuxPPS API ver. 1 registered [ 0.467495] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.467525] PTP clock support registered [ 0.467836] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.468323] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.468409] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.469245] Registered efivars operations [ 0.476317] FPGA manager framework [ 0.476486] Advanced Linux Sound Architecture Driver Initialized. [ 0.477352] Bluetooth: Core ver 2.22 [ 0.477403] NET: Registered protocol family 31 [ 0.477420] Bluetooth: HCI device and connection manager initialized [ 0.477441] Bluetooth: HCI socket layer initialized [ 0.477458] Bluetooth: L2CAP socket layer initialized [ 0.477486] Bluetooth: SCO socket layer initialized [ 0.479431] camchar: rtcpu character device driver loaded [ 0.480419] clocksource: Switched to clocksource arch_sys_counter [ 0.949303] VFS: Disk quotas dquot_6.6.0 [ 0.949396] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.949849] pnp: PnP ACPI: disabled [ 0.965495] la/ptsa driver initialized. [ 0.965672] NET: Registered protocol family 2 [ 0.965898] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.975031] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.975206] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.975580] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.976166] TCP: Hash tables configured (established 65536 bind 65536) [ 0.976312] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.976539] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.976805] NET: Registered protocol family 1 [ 0.977689] RPC: Registered named UNIX socket transport module. [ 0.977721] RPC: Registered udp transport module. [ 0.977739] RPC: Registered tcp transport module. [ 0.977755] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.977783] PCI: CLS 0 bytes, default 64 [ 0.978061] Trying to unpack rootfs image as initramfs... [ 1.245215] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.248559] Freeing initrd memory: 8196K [ 1.252855] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.252895] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.252941] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.253496] kvm [1]: IPA Size Limit: 40 bits [ 1.254090] kvm [1]: vgic interrupt IRQ9 [ 1.254688] kvm [1]: VHE mode initialized successfully [ 1.256272] Initialise system trusted keyrings [ 1.256663] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.263309] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.264160] NFS: Registering the id_resolver key type [ 1.264198] Key type id_resolver registered [ 1.264214] Key type id_legacy registered [ 1.264337] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.264362] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.264467] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.274510] NET: Registered protocol family 38 [ 1.274538] Key type asymmetric registered [ 1.274555] Asymmetric key parser 'x509' registered [ 1.274633] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.274897] io scheduler mq-deadline registered [ 1.274917] io scheduler kyber registered [ 1.280647] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.283926] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.284005] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.284082] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.284152] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.284223] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.289911] scrncapt: init (heads:4 wins:6 planes:4) [ 1.290159] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.291066] EINJ: ACPI disabled. [ 1.294711] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.294740] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.294756] tegra-pmc: ### PMC reset level: L1 [ 1.294771] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.294819] tegra-pmc: PMC Prod config success [ 1.299793] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.308994] random: fast init done [ 1.317113] printk: console [ttyTCU0] enabled [ 2.857217] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.861812] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.866427] arm-smmu 10000000.iommu: stage 1 translation [ 2.872117] arm-smmu 10000000.iommu: stage 2 translation [ 2.877623] arm-smmu 10000000.iommu: nested translation [ 2.882709] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.890141] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.901143] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.902980] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.909834] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.917343] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.922606] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.927356] arm-smmu 12000000.iommu: stage 1 translation [ 2.933096] arm-smmu 12000000.iommu: stage 2 translation [ 2.938523] arm-smmu 12000000.iommu: nested translation [ 2.943690] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.950869] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.961327] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.964228] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.970553] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.978262] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.987805] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.991210] tegra_profiler: auth: init [ 2.995179] THERMAL EST: found 3 subdevs [ 2.998647] THERMAL EST num_resources: 0 [ 3.002515] [THERMAL EST subdev 0] [ 3.005816] [THERMAL EST subdev 1] [ 3.009483] [THERMAL EST subdev 2] [ 3.012499] THERMAL EST: Found 2 profiles, default profile is quiet [ 3.019221] THERMAL EST: thz register success. [ 3.023424] THERMAL EST: end of probe, return err: 0 [ 3.028494] nvsciipc: loaded module [ 3.035576] tun: Universal TUN/TAP device driver, 1.6 [ 3.038374] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 3.044498] hns3: Copyright (c) 2017 Huawei Corporation. [ 3.050044] e1000e: Intel(R) PRO/1000 Network Driver [ 3.054730] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.061070] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.066100] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.072285] PPP generic driver version 2.4.2 [ 3.076580] PPP BSD Compression module registered [ 3.081330] PPP Deflate Compression module registered [ 3.086330] PPP MPPE Compression module registered [ 3.091603] usbcore: registered new interface driver r8152 [ 3.096845] usbcore: registered new interface driver asix [ 3.102182] usbcore: registered new interface driver ax88179_178a [ 3.108308] usbcore: registered new interface driver cdc_ether [ 3.114509] usbcore: registered new interface driver net1080 [ 3.120109] usbcore: registered new interface driver cdc_subset [ 3.125892] usbcore: registered new interface driver zaurus [ 3.131594] usbcore: registered new interface driver cdc_ncm [ 3.137521] usbcore: registered new interface driver aqc111 [ 3.143157] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.148982] ohci-pci: OHCI PCI platform driver [ 3.153534] ohci-platform: OHCI generic platform driver [ 3.159112] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.165640] usbcore: registered new interface driver uas [ 3.169575] usbcore: registered new interface driver usb-storage [ 3.176157] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.182037] mousedev: PS/2 mouse device common for all mice [ 3.186987] usbcore: registered new interface driver xpad [ 3.195097] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.197774] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.205513] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.212045] i2c /dev entries driver [ 3.215395] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.220982] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.226338] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.231974] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.237214] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.242473] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.247921] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.260857] device-mapper: uevent: version 1.0.3 [ 3.261278] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.269044] cpuidle: Initializing cpuidle driver [ 3.272710] sdhci: Secure Digital Host Controller Interface driver [ 3.277334] sdhci: Copyright(c) Pierre Ossman [ 3.281173] Synopsys Designware Multimedia Card Interface Driver [ 3.287362] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.293344] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.294098] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.306577] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.326884] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.336508] vdd-1v0: supplied by regulator-dummy [ 3.341959] vdd-1v8-hs: supplied by regulator-dummy [ 3.346811] vdd-1v8-ls: supplied by regulator-dummy [ 3.351540] vdd-1v8-ao: supplied by regulator-dummy [ 3.355500] vddio-ddr-1v1: supplied by regulator-dummy [ 3.359940] vdd-rtc: supplied by regulator-dummy [ 3.361679] spmic-ldo1: supplied by regulator-dummy [ 3.362959] vdd-ao-3v3: supplied by regulator-dummy [ 3.369137] vddio-emmc-3v3: supplied by regulator-dummy [ 3.375465] spmic-ldo4: supplied by regulator-dummy [ 3.376673] vdd-usb-3v3: supplied by regulator-dummy [ 3.382828] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.388980] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.394482] spmic-ldo8: supplied by vdd-1v8-ls [ 3.395960] gpio-510 (gpio_default): hogged as output/high [ 3.397295] gpio-511 (gpio_default): hogged as output/high [ 3.400640] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.539600] max77686-rtc max77620-rtc: registered as rtc0 [ 3.540754] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.541111] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.350331] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.351517] hid: raw HID events driver (C) Jiri Kosina [ 4.352317] usbcore: registered new interface driver usbhid [ 4.352499] usbhid: USB HID core driver [ 4.354837] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.355952] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.078256] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.152796] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.350 ms) ÿá[ 4.440282] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.441012] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.442065] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.442743] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.444466] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.445099] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.445657] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.447026] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.447317] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.449129] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.457102] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.463034] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.468620] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.474327] denver_knobs_init:MTS_VERSION:55637613 [ 4.487672] t19x_cache tegra-cache: probed [ 4.490339] optee: probing for conduit method. [ 4.491212] optee: revision 3.16 (65cc2218) [ 4.492260] optee: dynamic shared memory is enabled [ 4.495258] optee: initialized driver [ 4.502513] nvpmodel: initialized successfully [ 4.503221] tegra_hv: get_hvd: not initialized yet [ 4.507416] user_ivc_mempool: hypervisor not present [ 4.513795] usbcore: registered new interface driver snd-usb-audio [ 4.520022] u32 classifier [ 4.521429] input device check on [ 4.525133] Actions configured [ 4.528593] Initializing XFRM netlink socket [ 4.533353] NET: Registered protocol family 10 [ 4.539608] Segment Routing with IPv6 [ 4.540811] NET: Registered protocol family 17 [ 4.545275] NET: Registered protocol family 15 [ 4.549433] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.562992] Bluetooth: RFCOMM socket layer initialized [ 4.567867] Bluetooth: RFCOMM ver 1.11 [ 4.571616] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.577729] Bluetooth: HIDP socket layer initialized [ 4.583538] 9pnet: Installing 9P2000 support [ 4.587155] Key type dns_resolver registered [ 4.592303] registered taskstats version 1 [ 4.595606] Loading compiled-in X.509 certificates [ 4.607754] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.611220] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.621938] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.623252] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.632181] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.640210] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.756575] tegra194-pcie 14160000.pcie: Link up [ 4.759570] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.759750] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.759946] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.760200] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.760473] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.760956] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.761498] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.772936] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.773499] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.773900] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.775445] pci 0004:01:00.0: supports D1 D2 [ 4.775604] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.785863] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.786267] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.786516] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.786955] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.787257] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.787418] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.791449] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.798522] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.807060] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.817540] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.821915] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.827722] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.834772] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.843465] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.845317] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.853483] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.862179] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.977343] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.977810] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.978008] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.978349] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.978750] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.978950] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.979405] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.980030] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 6.000026] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 6.000524] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 6.002550] pcieport 0005:00:00.0: Adding to iommu group 7 [ 6.003712] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 6.005543] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 6.007196] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 6.008174] pci 0005:00:00.0: Removing from iommu group 7 [ 6.008632] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 6.044907] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.068941] host1x 13e10000.host1x: initialized [ 6.070591] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.071639] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.073316] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.074173] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.075401] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.076038] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.077287] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.077932] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.078812] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.079453] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.087238] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.094385] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.104193] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.111188] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.121354] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.128194] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.138076] falcon 15340000.vic: Adding to iommu group 17 [ 6.153210] falcon 15340000.vic: initialized [ 6.154376] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.159562] falcon 15380000.nvjpg: initialized [ 6.160134] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.172058] falcon 154c0000.nvenc: initialized [ 6.172780] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.181608] falcon 15a80000.nvenc1: initialized [ 6.182252] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.193986] nvdec 15480000.nvdec: initialized [ 6.194568] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.204202] nvdec 15140000.nvdec1: initialized [ 6.204794] tsec 15500000.tsec: Adding to iommu group 18 [ 6.210535] tsec 15500000.tsec: initialized [ 6.211051] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.218193] tsec 15100000.tsecb: initialized [ 6.222378] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.249096] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.261379] gpio-374 (wifi-enable): hogged as output/high [ 6.261661] gpio-431 (camera-control-output-low): hogged as output/low [ 6.261920] gpio-432 (camera-control-output-low): hogged as output/low [ 6.263715] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.265853] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.266482] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.269609] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.275171] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.280999] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.286386] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.294966] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.302016] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.313605] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.318353] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.324344] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.333231] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.342623] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.349882] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.357265] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.363530] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.373239] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.379685] pva 16000000.pva0: Adding to iommu group 22 [ 6.406244] pva 16000000.pva0: initialized [ 6.411510] pva 16800000.pva1: Adding to iommu group 23 [ 6.423571] pva 16800000.pva1: initialized [ 6.428853] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.443190] nvdla 15880000.nvdla0: initialized [ 6.444674] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.453110] nvdla 158c0000.nvdla1: initialized [ 6.456598] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.456881] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.457013] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.457277] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.457634] tegradc 15200000.display: Adding to iommu group 26 [ 6.457928] tegradccommon 15200000.display-hub: dma mapping done [ 6.459180] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.463463] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.465079] tegradc 15210000.display: Adding to iommu group 26 [ 6.465263] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.465344] generic_infoframe_type: 0x87 [ 6.465433] tegradc 15200000.display: DT parsed successfully [ 6.465524] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.469417] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.469630] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.469644] tegra_cec 3960000.tegra_cec: probed [ 6.470504] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.477111] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.481219] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.481234] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.482289] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.486076] kfuse 3830000.kfuse: initialized [ 6.491212] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.499625] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.508543] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.512935] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.513695] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.521509] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.538823] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.547729] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.554218] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.559157] tegradc 15210000.display: disp0 connected to head1->sor [ 6.563805] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.569841] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.581472] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.586882] tegradc 15210000.display: DT parsed successfully [ 6.593244] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.599805] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.684570] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.684944] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.687167] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.695536] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.704193] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.710487] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.718214] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.725473] usb usb1: Product: xHCI Host Controller [ 6.730521] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.736819] usb usb1: SerialNumber: 3610000.xhci [ 6.742188] hub 1-0:1.0: USB hub found [ 6.745544] hub 1-0:1.0: 4 ports detected [ 6.750050] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.754619] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.762237] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.770017] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.777795] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.785300] usb usb2: Product: xHCI Host Controller [ 6.790035] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.793145] random: crng init done [ 6.796411] usb usb2: SerialNumber: 3610000.xhci [ 6.805131] hub 2-0:1.0: USB hub found [ 6.808314] hub 2-0:1.0: 4 ports detected [ 6.851878] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.858179] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.859758] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.859932] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.873539] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.874683] tegra194-cpufreq ccplex: probed with BWMGR [ 6.875902] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.876304] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.876781] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.878233] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.885062] tegra194-vi5 15c10000.vi: initialized [ 6.886354] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.887499] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.888582] generic_infoframe_type: 0x87 [ 6.888587] mmc0: CQHCI version 5.10 [ 6.895019] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.898505] tegradc 15200000.display: DT parsed successfully [ 6.902107] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.902117] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.902121] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.902126] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.908481] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.910326] tegradc 15200000.display: Display dc.00000000805a47c8 registered with id=0 [ 6.916026] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.923953] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.928971] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.948183] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.948641] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.994400] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.994513] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 7.003035] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 7.016313] nvethernet 2490000.ethernet: Macsec not supported [ 7.016371] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 7.022368] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 7.035905] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 7.045789] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 7.046876] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 7.054707] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 7.061114] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 7.066982] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.077109] tegradc 15200000.display: probed [ 7.081813] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.094371] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.101064] tegra-se-nvhost 15810000.se: initialized [ 7.109150] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.110715] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.117339] tegra-se-nvhost 15820000.se: initialized [ 7.123189] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.128279] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.133500] mmc0: Command Queue Engine enabled [ 7.134572] tegra-se-nvhost 15830000.se: initialized [ 7.138552] mmc0: periodic cache flush enabled [ 7.144594] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.147636] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.154468] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.161019] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.167273] tegra-se-nvhost 15840000.se: initialized [ 7.171388] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.177538] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.189935] Console: switching to colour frame buffer device 240x67 [ 7.191148] tegra_actmon d230000.actmon: in actmon_register()... [ 7.195506] tegradc 15200000.display: fb registered [ 7.206318] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.206404] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.217879] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.218592] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.226188] hvc_sysfs: hypervisor is not present [ 7.227206] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.227212] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.227216] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.227220] usb 1-2: Manufacturer: Generic [ 7.229013] hub 1-2:1.0: USB hub found [ 7.230108] hub 1-2:1.0: 4 ports detected [ 7.232161] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.304113] ALSA device list: [ 7.304222] No soundcards found. [ 7.310713] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.345368] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.374503] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.375840] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.376075] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.377099] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.377310] Extcon AUX1(HDMI) enable [ 7.377585] tegradc 15210000.display: disp1 connected to head1->sor [ 7.377970] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.378351] tegradc 15210000.display: DT parsed successfully [ 7.378560] tegradc 15210000.display: Display dc.000000003f0b8571 registered with id=1 [ 7.378894] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.379085] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.382002] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.385952] tegradc 15210000.display: probed [ 7.386154] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.397898] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.397903] usb 2-3: Manufacturer: Generic [ 7.406882] tegradc 15210000.display: fb registered [ 7.408771] hub 2-3:1.0: USB hub found [ 7.414956] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.417268] Freeing unused kernel memory: 3968K [ 7.423180] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.427551] hub 2-3:1.0: 4 ports detected [ 7.435501] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.444704] tegradc 15210000.display: blank - powerdown [ 7.450221] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.452665] Run /init as init process [ 7.458261] Extcon DP: HPD disabled [ 7.465161] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.465171] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.465176] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.488443] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.491308] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.500477] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.511822] tegradc 15200000.display: blank - powerdown [ 7.545761] Root device found: mmcblk0p1 [ 7.547700] Found dev node: /dev/mmcblk0p1 [ 7.558192] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.558220] Extcon AUX1(HDMI) disable [ 7.581660] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.582274] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.582525] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.586350] Rootfs mounted over mmcblk0p1 [ 7.596013] tegradc 15200000.display: unblank [ 7.597129] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.597322] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.603750] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.605680] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.609775] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.609779] Extcon AUX1(HDMI) enable [ 7.615903] Switching from initrd to actual rootfs [ 7.622450] tegradc 15200000.display: sync windows ret = 247 [ 7.652660] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.653641] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.654096] Extcon HDMI: HPD enabled [ 7.654103] tegradc 15200000.display: hdmi: plugged [ 7.659575] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.666867] usb 1-3: Product: Bluetooth Radio [ 7.671009] usb 1-3: Manufacturer: Realtek [ 7.675180] usb 1-3: SerialNumber: 00e04c000001 [ 7.779363] systemd[1]: System time before build time, advancing clock. [ 7.850270] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.855271] systemd[1]: Detected architecture arm64. [ 7.894958] systemd[1]: Set hostname to . [ 8.061591] systemd-sysv-generator[243]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.405957] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.407805] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.413512] systemd[1]: Created slice system-modprobe.slice. [ 8.418376] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.422770] systemd[1]: Created slice User and Session Slice. [ 8.426446] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.430620] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.434096] systemd[1]: Reached target User and Group Name Lookups. [ 8.437350] systemd[1]: Reached target Slices. [ 8.440572] systemd[1]: Reached target Swap. [ 8.444702] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.448513] systemd[1]: Listening on Syslog Socket. [ 8.452187] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.455698] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.460079] systemd[1]: Listening on Journal Audit Socket. [ 8.463842] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.467737] systemd[1]: Listening on Journal Socket. [ 8.471530] systemd[1]: Listening on udev Control Socket. [ 8.476632] systemd[1]: Listening on udev Kernel Socket. [ 8.486222] systemd[1]: Mounting Huge Pages File System... [ 8.494266] systemd[1]: Mounting POSIX Message Queue File System... [ 8.502065] systemd[1]: Mounting RPC Pipe File System... [ 8.510416] systemd[1]: Mounting Kernel Debug File System... [ 8.518915] systemd[1]: Mounting Kernel Trace File System... [ 8.528704] systemd[1]: Starting Journal Service... [ 8.537379] systemd[1]: Starting Set the console keyboard layout... [ 8.545867] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.549576] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.556149] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.564245] systemd[1]: Started Nameserver information manager. [ 8.569129] systemd[1]: Reached target Network (Pre). [ 8.576257] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.578326] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.584694] systemd[1]: Starting Load Kernel Modules... [ 8.592945] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.602254] systemd[1]: Starting udev Coldplug all Devices... [ 8.612676] systemd[1]: Mounted Huge Pages File System. [ 8.616493] systemd[1]: Mounted POSIX Message Queue File System. [ 8.620284] systemd[1]: Mounted RPC Pipe File System. [ 8.620848] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.626428] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.629053] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.630679] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.632206] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.633666] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.635318] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.636510] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.637484] systemd[1]: Mounted Kernel Debug File System. [ 8.638578] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.643762] systemd[1]: Mounted Kernel Trace File System. [ 8.648480] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.650271] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.663881] systemd[1]: nvfb-udev.service: Succeeded. [ 8.668327] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.679159] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.684441] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.686299] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.698176] systemd[1]: Starting Load/Save Random Seed... [ 8.707040] systemd[1]: Starting Create System Users... [ 8.750463] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.750463] [ 8.765764] systemd[1]: Finished Create System Users. [ 8.779764] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.786546] systemd[1]: Finished Load/Save Random Seed. [ 8.793843] systemd[1]: Finished Load Kernel Modules. [ 8.801073] systemd[1]: Finished Set the console keyboard layout. [ 8.805709] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.812023] systemd[1]: Mounting Kernel Configuration File System... [ 8.820834] systemd[1]: Started OP-TEE Client Supplicant. [ 8.829229] systemd[1]: Starting Apply Kernel Variables... [ 8.842020] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.846461] systemd[1]: Mounted Kernel Configuration File System. [ 8.850265] systemd[1]: Reached target Local File Systems (Pre). [ 8.854145] systemd[1]: Reached target Local File Systems. [ 8.858188] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 10.290542] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.321991] imx219 9-0010: board setup failed [ 10.323343] imx219: probe of 9-0010 failed with error -121 [ 10.338804] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.347338] imx219 10-0010: board setup failed [ 10.352044] imx219: probe of 10-0010 failed with error -121 [ 10.446010] hot-surface-alert cooling state: 0 -> 1 [ 10.548236] using random self ethernet address [ 10.549530] using random host ethernet address [ 11.986724] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.988606] Creating 1 MTD partitions on "spi6.0": [ 11.988616] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.163155] using random self ethernet address [ 12.171611] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.864811] nvidia: loading out-of-tree module taints kernel. [ 57.890206] watchdog: watchdog0: watchdog did not stop! [ 58.370343] Trying to unregister non-registered hwtime source [ 61.431124] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.432765] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aÿâclk_dt_late initialized ÿäuÿânoc_late initialized pm_post initialized dbells initialized ÿäg 1ÿâdmce initialized ÿä1ÿâcvc initialized ÿä 03:23:20 UTÿâavfs_clk_mach_post initialized ÿäC 202ÿâavfs_clk_platform_post initialized ÿä2 ÿâcvc_late initialized regulator_post initialized ÿäaarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.589] I> regulator 'vdd-hdmi-5v0' already enabled [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.594] I> hdmi cable connected [0003.599] W> set volts not configured for 'vdd-1v0' [0003.604] W> set volts not configured for 'vdd-1v8-hs' [0003.604] I> retrieved tmds range from prod_list_hdmi_soc [0003.610] E> invalid display type [0003.611] E> cannot find any other nvdisp nodes [0003.627] I> edid read success [0003.640] I> edid read success [0003.640] I> width = 640, height = 480, frequency = 25174825 [0003.640] I> width = 1920, height = 1080, frequency = 148500000 [0003.641] I> width = 1280, height = 768, frequency = 79500000 [0003.641] I> width = 1360, height = 768, frequency = 85500000 [0003.641] I> width = 720, height = 480, frequency = 26973026 [0003.645] I> width = 720, height = 576, frequency = 26973026 [0003.651] I> width = 1280, height = 720, frequency = 74175824 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1920, height = 1080, frequency = 148351648 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 720, height = 480, frequency = 26973026 [0003.679] I> width = 720, height = 576, frequency = 26973026 [0003.685] I> width = 3840, height = 2160, frequency = 296703296 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 4096, height = 2160, frequency = 296703296 [0003.714] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.725] I> hdmi_enable, starting HDMI initialisation [0003.730] I> hdmi_enable, HDMI initialisation complete [0003.739] initializing target [0003.740] calling apps_init() [0003.740] starting app kernel_boot_app [0003.741] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000672] Console: colour dummy device 80x25 [ 0.002162] printk: console [tty0] enabled [ 0.002232] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002270] pid_max: default: 32768 minimum: 301 [ 0.002448] LSM: Security Framework initializing [ 0.002509] Yama: becoming mindful. [ 0.002555] SELinux: Initializing. [ 0.002768] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002825] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006037] rcu: Hierarchical SRCU implementation. [ 0.006326] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007027] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007056] DTB Build time: Aug 10 2022 20:31:49 [ 0.009713] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009958] Remapping and enabling EFI services. [ 0.012467] smp: Bringing up secondary CPUs ... [ 0.042759] Detected PIPT I-cache on CPU1 [ 0.042832] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072332] Detected PIPT I-cache on CPU2 [ 0.072482] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102017] Detected PIPT I-cache on CPU3 [ 0.102156] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131851] Detected PIPT I-cache on CPU4 [ 0.132015] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161704] Detected PIPT I-cache on CPU5 [ 0.161901] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162253] smp: Brought up 1 node, 6 CPUs [ 0.162471] SMP: Total of 6 processors activated. [ 0.162569] CPU features: detected: Privileged Access Never [ 0.162594] CPU features: detected: LSE atomic instructions [ 0.162607] CPU features: detected: User Access Override [ 0.162620] CPU features: detected: 32-bit EL0 Support [ 0.162633] CPU features: detected: RAS Extension Support [ 0.162645] CPU features: detected: CRC32 instructions [ 0.162659] CPU features: detected: 32-bit EL1 Support [ 0.236690] CPU: All CPU(s) started at EL2 [ 0.243401] devtmpfs: initialized [ 0.294678] Registered cp15_barrier emulation handler [ 0.294815] Registered setend emulation handler [ 0.294835] KASLR enabled [ 0.295092] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.295117] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.296453] pinctrl core: initialized pinctrl subsystem [ 0.297490] SMBIOS 3.0.0 present. [ 0.297518] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.298108] NET: Registered protocol family 16 [ 0.300017] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.300549] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.301259] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.301327] audit: initializing netlink subsys (disabled) [ 0.301564] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.301992] thermal_sys: Registered thermal governor 'step_wise' [ 0.301998] thermal_sys: Registered thermal governor 'power_allocator' [ 0.302012] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.304248] cpuidle: using governor menu [ 0.304581] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.305011] ASID allocator initialised with 32768 entries [ 0.305247] Serial: AMBA PL011 UART driver [ 0.308685] Tegra reboot handler registered. [ 0.381558] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.381693] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.381901] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.381946] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.382072] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.382118] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.382257] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.382301] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.382423] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.382470] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.384576] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.384610] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.384638] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.384704] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.384736] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.384762] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.384788] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.384813] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.384838] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.384864] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.384890] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.384931] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.384958] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.385001] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.385051] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.385077] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.385104] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.385199] mc-err: mcerr ops are set to t19x [ 0.397466] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.397492] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.397506] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.397519] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.403933] ACPI: Interpreter disabled. [ 0.405132] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.406399] iommu: Default domain type: Translated [ 0.406462] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.406816] SCSI subsystem initialized [ 0.406968] usbcore: registered new interface driver usbfs [ 0.407009] usbcore: registered new interface driver hub [ 0.407045] usbcore: registered new device driver usb [ 0.407439] mc: Linux media interface: v0.10 [ 0.407468] videodev: Linux video capture interface: v2.00 [ 0.407781] pps_core: LinuxPPS API ver. 1 registered [ 0.407793] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.407813] PTP clock support registered [ 0.408008] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.408341] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.408435] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.409125] Registered efivars operations [ 0.414761] FPGA manager framework [ 0.414891] Advanced Linux Sound Architecture Driver Initialized. [ 0.415555] Bluetooth: Core ver 2.22 [ 0.415608] NET: Registered protocol family 31 [ 0.415620] Bluetooth: HCI device and connection manager initialized [ 0.415635] Bluetooth: HCI socket layer initialized [ 0.415665] Bluetooth: L2CAP socket layer initialized [ 0.415689] Bluetooth: SCO socket layer initialized [ 0.417288] camchar: rtcpu character device driver loaded [ 0.417975] clocksource: Switched to clocksource arch_sys_counter [ 0.713223] VFS: Disk quotas dquot_6.6.0 [ 0.713317] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.713620] pnp: PnP ACPI: disabled [ 0.726324] la/ptsa driver initialized. [ 0.726444] NET: Registered protocol family 2 [ 0.726625] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.731960] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.732107] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.732346] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.732772] TCP: Hash tables configured (established 65536 bind 65536) [ 0.732953] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.733068] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.733283] NET: Registered protocol family 1 [ 0.734304] RPC: Registered named UNIX socket transport module. [ 0.734338] RPC: Registered udp transport module. [ 0.734358] RPC: Registered tcp transport module. [ 0.734377] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.734407] PCI: CLS 0 bytes, default 64 [ 0.734670] Trying to unpack rootfs image as initramfs... [ 0.931557] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.933591] Freeing initrd memory: 8196K [ 0.937909] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.937959] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.938079] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.938520] kvm [1]: IPA Size Limit: 40 bits [ 0.939104] kvm [1]: vgic interrupt IRQ9 [ 0.939658] kvm [1]: VHE mode initialized successfully [ 0.940858] Initialise system trusted keyrings [ 0.941140] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.946102] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.946790] NFS: Registering the id_resolver key type [ 0.946818] Key type id_resolver registered [ 0.946829] Key type id_legacy registered [ 0.946911] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.946930] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.946958] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.954170] NET: Registered protocol family 38 [ 0.954192] Key type asymmetric registered [ 0.954204] Asymmetric key parser 'x509' registered [ 0.954247] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.954427] io scheduler mq-deadline registered [ 0.954441] io scheduler kyber registered [ 0.958839] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.961192] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.961253] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.961303] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.961350] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.961399] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.966104] scrncapt: init (heads:4 wins:6 planes:4) [ 0.966536] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.967264] EINJ: ACPI disabled. [ 0.969770] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.969794] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.969804] tegra-pmc: ### PMC reset level: L1 [ 0.969814] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.969850] tegra-pmc: PMC Prod config success [ 0.973707] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.978276] random: fast init done [ 0.978334] printk: console [ttyTCU0] enabled [ 2.531309] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.535320] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.539935] arm-smmu 10000000.iommu: stage 1 translation [ 2.545601] arm-smmu 10000000.iommu: stage 2 translation [ 2.551100] arm-smmu 10000000.iommu: nested translation [ 2.556444] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.563616] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.575129] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.576712] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.583042] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.591276] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.596337] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.601061] arm-smmu 12000000.iommu: stage 1 translation [ 2.606315] arm-smmu 12000000.iommu: stage 2 translation [ 2.611994] arm-smmu 12000000.iommu: nested translation [ 2.617167] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.624345] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.635681] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.637701] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.644032] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.651756] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.661338] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.664450] tegra_profiler: auth: init [ 2.668926] THERMAL EST: found 3 subdevs [ 2.672118] THERMAL EST num_resources: 0 [ 2.676218] [THERMAL EST subdev 0] [ 2.679290] [THERMAL EST subdev 1] [ 2.682956] [THERMAL EST subdev 2] [ 2.685935] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.692437] THERMAL EST: thz register success. [ 2.696668] THERMAL EST: end of probe, return err: 0 [ 2.702207] nvsciipc: loaded module [ 2.709147] tun: Universal TUN/TAP device driver, 1.6 [ 2.711783] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.717715] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.723531] e1000e: Intel(R) PRO/1000 Network Driver [ 2.728199] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.734550] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.739831] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.745788] PPP generic driver version 2.4.2 [ 2.749998] PPP BSD Compression module registered [ 2.754554] PPP Deflate Compression module registered [ 2.760053] PPP MPPE Compression module registered [ 2.765069] usbcore: registered new interface driver r8152 [ 2.770353] usbcore: registered new interface driver asix [ 2.775906] usbcore: registered new interface driver ax88179_178a [ 2.782034] usbcore: registered new interface driver cdc_ether [ 2.788050] usbcore: registered new interface driver net1080 [ 2.793582] usbcore: registered new interface driver cdc_subset [ 2.799364] usbcore: registered new interface driver zaurus [ 2.805064] usbcore: registered new interface driver cdc_ncm [ 2.810741] usbcore: registered new interface driver aqc111 [ 2.816428] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.822717] ohci-pci: OHCI PCI platform driver [ 2.826753] ohci-platform: OHCI generic platform driver [ 2.832625] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.839279] usbcore: registered new interface driver uas [ 2.843304] usbcore: registered new interface driver usb-storage [ 2.849202] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.855457] mousedev: PS/2 mouse device common for all mice [ 2.860224] usbcore: registered new interface driver xpad [ 2.868361] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.870957] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.879011] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.885319] i2c /dev entries driver [ 2.888631] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.894684] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.899933] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.905510] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.910677] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.916147] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.921384] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.933286] device-mapper: uevent: version 1.0.3 [ 2.933746] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.941549] cpuidle: Initializing cpuidle driver [ 2.945561] sdhci: Secure Digital Host Controller Interface driver [ 2.950560] sdhci: Copyright(c) Pierre Ossman [ 2.954644] Synopsys Designware Multimedia Card Interface Driver [ 2.961064] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.966893] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.967383] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.979920] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.998896] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.007815] vdd-1v0: supplied by regulator-dummy [ 3.013177] vdd-1v8-hs: supplied by regulator-dummy [ 3.017832] vdd-1v8-ls: supplied by regulator-dummy [ 3.022546] vdd-1v8-ao: supplied by regulator-dummy [ 3.026305] vddio-ddr-1v1: supplied by regulator-dummy [ 3.030570] vdd-rtc: supplied by regulator-dummy [ 3.032138] spmic-ldo1: supplied by regulator-dummy [ 3.033303] vdd-ao-3v3: supplied by regulator-dummy [ 3.039312] vddio-emmc-3v3: supplied by regulator-dummy [ 3.045412] spmic-ldo4: supplied by regulator-dummy [ 3.046483] vdd-usb-3v3: supplied by regulator-dummy [ 3.052552] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.058678] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.064120] spmic-ldo8: supplied by vdd-1v8-ls [ 3.065484] gpio-510 (gpio_default): hogged as output/high [ 3.067044] gpio-511 (gpio_default): hogged as output/high [ 3.073663] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.212309] max77686-rtc max77620-rtc: registered as rtc0 [ 3.213533] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.213835] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.919234] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.920227] hid: raw HID events driver (C) Jiri Kosina [ 3.920880] usbcore: registered new interface driver usbhid [ 3.921012] usbhid: USB HID core driver [ 3.922745] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.923803] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.766203] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.841936] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.543 ms) ÿá[ 4.009549] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.010134] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.011148] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.011981] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.014244] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.014847] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.015380] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.016891] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.017224] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.019717] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.025696] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.032200] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.036843] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.044355] denver_knobs_init:MTS_VERSION:55637613 [ 4.056060] t19x_cache tegra-cache: probed [ 4.058687] optee: probing for conduit method. [ 4.059517] optee: revision 3.16 (65cc2218) [ 4.060654] optee: dynamic shared memory is enabled [ 4.064637] optee: initialized driver [ 4.071029] nvpmodel: initialized successfully [ 4.071985] tegra_hv: get_hvd: not initialized yet [ 4.076420] user_ivc_mempool: hypervisor not present [ 4.082973] usbcore: registered new interface driver snd-usb-audio [ 4.089351] u32 classifier [ 4.090543] input device check on [ 4.094060] Actions configured [ 4.097368] Initializing XFRM netlink socket [ 4.102527] NET: Registered protocol family 10 [ 4.108408] Segment Routing with IPv6 [ 4.109933] NET: Registered protocol family 17 [ 4.113993] NET: Registered protocol family 15 [ 4.118343] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.131887] Bluetooth: RFCOMM socket layer initialized [ 4.136686] Bluetooth: RFCOMM ver 1.11 [ 4.140798] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.146448] Bluetooth: HIDP socket layer initialized [ 4.152500] 9pnet: Installing 9P2000 support [ 4.156165] Key type dns_resolver registered [ 4.161418] registered taskstats version 1 [ 4.164538] Loading compiled-in X.509 certificates [ 4.176939] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.180803] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.190182] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.192193] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.201072] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.209236] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.326038] tegra194-pcie 14160000.pcie: Link up [ 4.328880] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.329104] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.329250] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.329485] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.329684] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.330165] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.330592] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.340765] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.341278] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.341735] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.343335] pci 0004:01:00.0: supports D1 D2 [ 4.343520] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.351583] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.351976] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.352215] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.352646] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.352967] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.354896] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.360612] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.368281] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.377028] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.386953] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.391520] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.397113] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.404034] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.412693] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.414504] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.423187] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.431781] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.538101] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.538690] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.538936] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.539108] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.539355] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.539549] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.539939] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.540330] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.556369] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.556756] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.558892] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.560317] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.561593] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.563213] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.564172] pci 0005:00:00.0: Removing from iommu group 7 [ 5.564448] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.595602] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.616812] host1x 13e10000.host1x: initialized [ 5.618307] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.619291] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.620273] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.620882] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.621821] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.622567] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.623557] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.624166] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.631204] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.637953] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.648253] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.655251] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.665148] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.672062] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.681912] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.688926] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.698840] falcon 15340000.vic: Adding to iommu group 17 [ 5.713088] falcon 15340000.vic: initialized [ 5.714091] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.719616] falcon 15380000.nvjpg: initialized [ 5.720240] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.731666] falcon 154c0000.nvenc: initialized [ 5.732245] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.741599] falcon 15a80000.nvenc1: initialized [ 5.742187] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.754254] nvdec 15480000.nvdec: initialized [ 5.754785] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.764762] nvdec 15140000.nvdec1: initialized [ 5.765402] tsec 15500000.tsec: Adding to iommu group 18 [ 5.770527] tsec 15500000.tsec: initialized [ 5.771022] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.779016] tsec 15100000.tsecb: initialized [ 5.782498] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.808968] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.821324] gpio-374 (wifi-enable): hogged as output/high [ 5.821653] gpio-431 (camera-control-output-low): hogged as output/low [ 5.821927] gpio-432 (camera-control-output-low): hogged as output/low [ 5.823864] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.826083] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.826737] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.830411] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.835584] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.841910] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.847279] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.855286] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.863028] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.874152] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.879558] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.885135] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.893989] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.903522] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.910527] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.918073] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.924603] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.934255] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.940242] pva 16000000.pva0: Adding to iommu group 22 [ 5.966976] pva 16000000.pva0: initialized [ 5.972285] pva 16800000.pva1: Adding to iommu group 23 [ 5.983067] pva 16800000.pva1: initialized [ 5.988365] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.000744] nvdla 15880000.nvdla0: initialized [ 6.002158] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.010722] nvdla 158c0000.nvdla1: initialized [ 6.012955] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.013249] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.014078] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.014881] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.015211] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.015405] tegra_cec 3960000.tegra_cec: probed [ 6.015670] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.015707] tegradc 15200000.display: Adding to iommu group 26 [ 6.015727] tegradc 15210000.display: Adding to iommu group 26 [ 6.017552] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.021291] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.029160] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.033207] tegradccommon 15200000.display-hub: dma mapping done [ 6.039369] kfuse 3830000.kfuse: initialized [ 6.063791] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.069426] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.076873] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.082626] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.092276] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.097042] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.106223] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.112009] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.131911] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.132237] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.135396] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.143572] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.151955] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.158599] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.166362] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.173504] usb usb1: Product: xHCI Host Controller [ 6.178242] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.184533] usb usb1: SerialNumber: 3610000.xhci [ 6.190161] hub 1-0:1.0: USB hub found [ 6.193375] hub 1-0:1.0: 4 ports detected [ 6.197864] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.202500] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.210367] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.217892] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.225984] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.233110] usb usb2: Product: xHCI Host Controller [ 6.238205] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.244431] usb usb2: SerialNumber: 3610000.xhci [ 6.250268] hub 2-0:1.0: USB hub found [ 6.252849] hub 2-0:1.0: 4 ports detected [ 6.292494] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.297913] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.299291] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.299503] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.312535] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.313606] tegra194-cpufreq ccplex: probed with BWMGR [ 6.314731] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.315352] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.315808] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.317059] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.327977] mmc0: CQHCI version 5.10 [ 6.329558] tegra194-vi5 15c10000.vi: initialized [ 6.331445] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.332542] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.336559] generic_infoframe_type: 0x87 [ 6.343303] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.346631] tegradc 15200000.display: DT parsed successfully [ 6.355062] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.360524] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.367132] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.376104] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.381226] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.381658] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.381668] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.390065] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.406043] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.410361] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.410719] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.419021] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.419029] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.425152] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.434582] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.439464] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.454241] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.466706] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.467718] mmc0: Command Queue Engine enabled [ 6.469006] tegradc 15200000.display: probed [ 6.477387] nvethernet 2490000.ethernet: Macsec not supported [ 6.478789] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.485011] mmc0: periodic cache flush enabled [ 6.493803] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.497170] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.498088] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.501640] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.508075] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.515410] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.519714] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.526788] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.543378] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.547530] tegra-se-nvhost 15810000.se: initialized [ 6.583854] Console: switching to colour frame buffer device 240x67 [ 6.588503] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.590005] tegradc 15200000.display: fb registered [ 6.590075] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.596831] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.601792] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.607372] tegra-se-nvhost 15820000.se: initialized [ 6.612966] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.620570] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.636331] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.642962] tegra-se-nvhost 15830000.se: initialized [ 6.648240] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.654118] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.660541] tegra-se-nvhost 15840000.se: initialized [ 6.666202] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.672493] tegra_actmon d230000.actmon: in actmon_register()... [ 6.673569] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.676808] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.683715] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.684850] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.684861] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.684866] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.684870] usb 1-2: Manufacturer: Generic [ 6.686958] hub 1-2:1.0: USB hub found [ 6.688349] hub 1-2:1.0: 4 ports detected [ 6.691028] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.699549] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.700150] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.707030] hvc_sysfs: hypervisor is not present [ 6.714414] Extcon AUX1(HDMI) enable [ 6.714682] tegradc 15210000.display: disp1 connected to head1->sor [ 6.746012] ALSA device list: [ 6.747020] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.753909] No soundcards found. [ 6.758951] tegradc 15210000.display: DT parsed successfully [ 6.787913] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.796105] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.802097] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.808916] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.814868] tegradc 15210000.display: probed [ 6.820196] tegradc 15210000.display: fb registered [ 6.828180] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.832373] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.833324] Freeing unused kernel memory: 3968K [ 6.839846] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.850340] tegradc 15210000.display: blank - powerdown ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.855223] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.855227] Extcon DP: HPD disabled [ 6.855230] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.855239] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.855244] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.855357] tegradc 15200000.display: blank - powerdown [ 6.862125] Run /init as init process [ 6.867602] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.867608] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.867613] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.867616] usb 2-3: Manufacturer: Generic [ 6.878675] hub 2-3:1.0: USB hub found [ 6.880554] hub 2-3:1.0: 4 ports detected [ 6.900742] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.900747] Extcon AUX1(HDMI) disable [ 6.924117] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.924990] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.938233] tegradc 15200000.display: unblank [ 6.939490] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.939681] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.945896] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.947741] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.951890] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.951895] Extcon AUX1(HDMI) enable [ 6.964493] tegradc 15200000.display: sync windows ret = 247 [ 6.986062] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.026016] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.032877] Extcon HDMI: HPD enabled [ 7.036562] tegradc 15200000.display: hdmi: plugged [ 7.042043] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.077033] Root device found: mmcblk0p1 [ 7.080360] Found dev node: /dev/mmcblk0p1 [ 7.106589] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.107989] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.117478] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.123003] Rootfs mounted over mmcblk0p1 [ 7.153509] Switching from initrd to actual rootfs [ 7.175291] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.176707] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.178070] usb 1-3: Product: Bluetooth Radio [ 7.179355] usb 1-3: Manufacturer: Realtek [ 7.180595] usb 1-3: SerialNumber: 00e04c000001 [ 7.296839] systemd[1]: System time before build time, advancing clock. [ 7.368584] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.373360] systemd[1]: Detected architecture arm64. [ 7.423886] systemd[1]: Set hostname to . [ 7.482632] random: crng init done [ 7.593786] systemd-sysv-generator[244]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.947955] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.949607] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.955156] systemd[1]: Created slice system-modprobe.slice. [ 7.959710] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.963952] systemd[1]: Created slice User and Session Slice. [ 7.967272] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.971379] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.974649] systemd[1]: Reached target User and Group Name Lookups. [ 7.977665] systemd[1]: Reached target Slices. [ 7.980704] systemd[1]: Reached target Swap. [ 7.984584] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.988041] systemd[1]: Listening on Syslog Socket. [ 7.991446] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.994711] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.000369] systemd[1]: Listening on Journal Audit Socket. [ 8.005382] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.009125] systemd[1]: Listening on Journal Socket. [ 8.012827] systemd[1]: Listening on udev Control Socket. [ 8.016300] systemd[1]: Listening on udev Kernel Socket. [ 8.024719] systemd[1]: Mounting Huge Pages File System... [ 8.032897] systemd[1]: Mounting POSIX Message Queue File System... [ 8.040814] systemd[1]: Mounting RPC Pipe File System... [ 8.049436] systemd[1]: Mounting Kernel Debug File System... [ 8.057799] systemd[1]: Mounting Kernel Trace File System... [ 8.067967] systemd[1]: Starting Journal Service... [ 8.077118] systemd[1]: Starting Set the console keyboard layout... [ 8.085516] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.089023] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.095553] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.103610] systemd[1]: Started Nameserver information manager. [ 8.108289] systemd[1]: Reached target Network (Pre). [ 8.115290] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.117128] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.125378] systemd[1]: Starting Load Kernel Modules... [ 8.133110] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.141336] systemd[1]: Starting udev Coldplug all Devices... [ 8.151726] systemd[1]: Mounted Huge Pages File System. [ 8.155614] systemd[1]: Mounted POSIX Message Queue File System. [ 8.159239] systemd[1]: Mounted RPC Pipe File System. [ 8.164174] systemd[1]: Mounted Kernel Debug File System. [ 8.165024] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.166281] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.167472] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.169953] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.170007] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.170013] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.170193] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.171679] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.177188] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.177205] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.187849] systemd[1]: Mounted Kernel Trace File System. [ 8.195512] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.201750] systemd[1]: nvfb-udev.service: Succeeded. [ 8.206752] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.220149] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.233689] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.235498] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.242663] systemd[1]: Starting Load/Save Random Seed... [ 8.250744] systemd[1]: Starting Create System Users... [ 8.267983] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.267983] [ 8.301552] systemd[1]: Finished Load Kernel Modules. [ 8.308243] systemd[1]: Finished Load/Save Random Seed. [ 8.313136] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.319813] systemd[1]: Mounting Kernel Configuration File System... [ 8.328370] systemd[1]: Started OP-TEE Client Supplicant. [ 8.337103] systemd[1]: Starting Apply Kernel Variables... [ 8.346766] systemd[1]: Finished Set the console keyboard layout. [ 8.351152] systemd[1]: Mounted Kernel Configuration File System. [ 8.363772] systemd[1]: Finished Create System Users. [ 9.828694] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.834017] imx219 9-0010: board setup failed [ 9.835340] imx219: probe of 9-0010 failed with error -121 [ 9.847469] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.855149] imx219 10-0010: board setup failed [ 9.856526] imx219: probe of 10-0010 failed with error -121 [ 9.896913] hot-surface-alert cooling state: 0 -> 1 [ 10.132533] using random self ethernet address [ 10.133684] using random host ethernet address [ 11.391963] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.391970] Creating 1 MTD partitions on "spi6.0": [ 11.391980] 0x000000000000-0x000002000000 : "Whole_flash0" [ 11.929031] using random self ethernet address [ 11.942007] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.808116] nvidia: loading out-of-tree module taints kernel. [ 58.239493] watchdog: watchdog0: watchdog did not stop! [ 58.719148] Trying to unregister non-registered hwtime source [ 61.776737] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.778872] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy :ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 69500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.905] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.420] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.650] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.652] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.750] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932988K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475328K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000702] Console: colour dummy device 80x25 [ 0.002292] printk: console [tty0] enabled [ 0.002360] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002397] pid_max: default: 32768 minimum: 301 [ 0.002592] LSM: Security Framework initializing [ 0.002669] Yama: becoming mindful. [ 0.002739] SELinux: Initializing. [ 0.002910] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002950] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006000] rcu: Hierarchical SRCU implementation. [ 0.006255] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006930] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006975] DTB Build time: Aug 10 2022 20:31:49 [ 0.009708] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009965] Remapping and enabling EFI services. [ 0.012086] smp: Bringing up secondary CPUs ... [ 0.041344] Detected PIPT I-cache on CPU1 [ 0.041418] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071340] Detected PIPT I-cache on CPU2 [ 0.071440] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101038] Detected PIPT I-cache on CPU3 [ 0.101212] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130947] Detected PIPT I-cache on CPU4 [ 0.131048] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160692] Detected PIPT I-cache on CPU5 [ 0.160764] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161101] smp: Brought up 1 node, 6 CPUs [ 0.161298] SMP: Total of 6 processors activated. [ 0.161337] CPU features: detected: Privileged Access Never [ 0.161361] CPU features: detected: LSE atomic instructions [ 0.161395] CPU features: detected: User Access Override [ 0.161409] CPU features: detected: 32-bit EL0 Support [ 0.161422] CPU features: detected: RAS Extension Support [ 0.161435] CPU features: detected: CRC32 instructions [ 0.161449] CPU features: detected: 32-bit EL1 Support [ 0.231294] CPU: All CPU(s) started at EL2 [ 0.236426] devtmpfs: initialized [ 0.285800] Registered cp15_barrier emulation handler [ 0.285934] Registered setend emulation handler [ 0.285956] KASLR enabled [ 0.286221] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286266] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287430] pinctrl core: initialized pinctrl subsystem [ 0.288316] SMBIOS 3.0.0 present. [ 0.288347] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288941] NET: Registered protocol family 16 [ 0.290762] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291495] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292178] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292237] audit: initializing netlink subsys (disabled) [ 0.292529] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292933] thermal_sys: Registered thermal governor 'step_wise' [ 0.292939] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292955] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.296178] cpuidle: using governor menu [ 0.296429] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296816] ASID allocator initialised with 32768 entries [ 0.297055] Serial: AMBA PL011 UART driver [ 0.300418] Tegra reboot handler registered. [ 0.366704] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.366848] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.367047] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.367107] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.367248] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.367296] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.367436] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.367499] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.367643] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.367693] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.370385] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.370449] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.370486] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.370526] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.370565] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.370594] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.370621] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.370647] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.370674] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.370700] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.370726] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.370751] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.370777] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.370802] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.370828] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.370878] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.370905] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.371019] mc-err: mcerr ops are set to t19x [ 0.382916] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.382940] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.382952] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.382964] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.390053] ACPI: Interpreter disabled. [ 0.391404] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.392871] iommu: Default domain type: Translated [ 0.392955] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.393307] SCSI subsystem initialized [ 0.393458] usbcore: registered new interface driver usbfs [ 0.393501] usbcore: registered new interface driver hub [ 0.393571] usbcore: registered new device driver usb [ 0.394208] mc: Linux media interface: v0.10 [ 0.394236] videodev: Linux video capture interface: v2.00 [ 0.394743] pps_core: LinuxPPS API ver. 1 registered [ 0.394758] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.394779] PTP clock support registered [ 0.395047] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.395355] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.395441] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.396181] Registered efivars operations [ 0.401974] FPGA manager framework [ 0.402074] Advanced Linux Sound Architecture Driver Initialized. [ 0.402710] Bluetooth: Core ver 2.22 [ 0.402752] NET: Registered protocol family 31 [ 0.402763] Bluetooth: HCI device and connection manager initialized [ 0.402779] Bluetooth: HCI socket layer initialized [ 0.402795] Bluetooth: L2CAP socket layer initialized [ 0.402816] Bluetooth: SCO socket layer initialized [ 0.404356] camchar: rtcpu character device driver loaded [ 0.405131] clocksource: Switched to clocksource arch_sys_counter [ 0.811204] VFS: Disk quotas dquot_6.6.0 [ 0.811303] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.811766] pnp: PnP ACPI: disabled [ 0.825893] la/ptsa driver initialized. [ 0.826053] NET: Registered protocol family 2 [ 0.826281] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.833989] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.834134] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.834512] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.835133] TCP: Hash tables configured (established 65536 bind 65536) [ 0.835361] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.835510] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.835801] NET: Registered protocol family 1 [ 0.836599] RPC: Registered named UNIX socket transport module. [ 0.836627] RPC: Registered udp transport module. [ 0.836646] RPC: Registered tcp transport module. [ 0.836665] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.836695] PCI: CLS 0 bytes, default 64 [ 0.837084] Trying to unpack rootfs image as initramfs... [ 1.100870] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.103806] Freeing initrd memory: 8196K [ 1.108568] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.108601] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.108653] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.108998] kvm [1]: IPA Size Limit: 40 bits [ 1.109672] kvm [1]: vgic interrupt IRQ9 [ 1.110182] kvm [1]: VHE mode initialized successfully [ 1.111740] Initialise system trusted keyrings [ 1.112079] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.118672] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.119535] NFS: Registering the id_resolver key type [ 1.119570] Key type id_resolver registered [ 1.119585] Key type id_legacy registered [ 1.119678] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.119702] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.119739] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.130069] NET: Registered protocol family 38 [ 1.130092] Key type asymmetric registered [ 1.130107] Asymmetric key parser 'x509' registered [ 1.130156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.130391] io scheduler mq-deadline registered [ 1.130409] io scheduler kyber registered [ 1.136475] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.139572] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.139656] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.139734] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.139806] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.139876] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.144943] scrncapt: init (heads:4 wins:6 planes:4) [ 1.145468] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.146401] EINJ: ACPI disabled. [ 1.149710] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.149734] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.149750] tegra-pmc: ### PMC reset level: L1 [ 1.149764] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.149822] tegra-pmc: PMC Prod config success [ 1.154710] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.160125] random: fast init done [ 1.160508] printk: console [ttyTCU0] enabled [ 2.712212] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.716785] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.721252] arm-smmu 10000000.iommu: stage 1 translation [ 2.726491] arm-smmu 10000000.iommu: stage 2 translation [ 2.732258] arm-smmu 10000000.iommu: nested translation [ 2.737604] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.744777] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.755296] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.757904] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.764201] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.772273] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.777501] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.782222] arm-smmu 12000000.iommu: stage 1 translation [ 2.787738] arm-smmu 12000000.iommu: stage 2 translation [ 2.792902] arm-smmu 12000000.iommu: nested translation [ 2.798585] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.805507] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.815834] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.818897] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.825189] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.832575] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.842906] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.845894] tegra_profiler: auth: init [ 2.850063] THERMAL EST: found 3 subdevs [ 2.853290] THERMAL EST num_resources: 0 [ 2.857384] [THERMAL EST subdev 0] [ 2.860431] [THERMAL EST subdev 1] [ 2.864141] [THERMAL EST subdev 2] [ 2.867111] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.873610] THERMAL EST: thz register success. [ 2.877810] THERMAL EST: end of probe, return err: 0 [ 2.883402] nvsciipc: loaded module [ 2.890501] tun: Universal TUN/TAP device driver, 1.6 [ 2.892680] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.898875] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.904438] e1000e: Intel(R) PRO/1000 Network Driver [ 2.909621] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.915452] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.920999] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.927178] PPP generic driver version 2.4.2 [ 2.931428] PPP BSD Compression module registered [ 2.935723] PPP Deflate Compression module registered [ 2.940969] PPP MPPE Compression module registered [ 2.945975] usbcore: registered new interface driver r8152 [ 2.951740] usbcore: registered new interface driver asix [ 2.956823] usbcore: registered new interface driver ax88179_178a [ 2.962952] usbcore: registered new interface driver cdc_ether [ 2.969164] usbcore: registered new interface driver net1080 [ 2.974748] usbcore: registered new interface driver cdc_subset [ 2.980571] usbcore: registered new interface driver zaurus [ 2.986231] usbcore: registered new interface driver cdc_ncm [ 2.991906] usbcore: registered new interface driver aqc111 [ 2.997532] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.003886] ohci-pci: OHCI PCI platform driver [ 3.007917] ohci-platform: OHCI generic platform driver [ 3.013863] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.020421] usbcore: registered new interface driver uas [ 3.024482] usbcore: registered new interface driver usb-storage [ 3.030357] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.036573] mousedev: PS/2 mouse device common for all mice [ 3.041626] usbcore: registered new interface driver xpad [ 3.049427] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.052084] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.059905] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.066444] i2c /dev entries driver [ 3.069810] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.075581] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.081342] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.086342] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.091662] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.097221] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.102634] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.116232] device-mapper: uevent: version 1.0.3 [ 3.116664] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.122884] cpuidle: Initializing cpuidle driver [ 3.127024] sdhci: Secure Digital Host Controller Interface driver [ 3.131712] sdhci: Copyright(c) Pierre Ossman [ 3.136060] Synopsys Designware Multimedia Card Interface Driver [ 3.142213] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.147867] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.148417] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.161360] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.180015] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.188811] vdd-1v0: supplied by regulator-dummy [ 3.194131] vdd-1v8-hs: supplied by regulator-dummy [ 3.198803] vdd-1v8-ls: supplied by regulator-dummy [ 3.203445] vdd-1v8-ao: supplied by regulator-dummy [ 3.207319] vddio-ddr-1v1: supplied by regulator-dummy [ 3.211669] vdd-rtc: supplied by regulator-dummy [ 3.213285] spmic-ldo1: supplied by regulator-dummy [ 3.214458] vdd-ao-3v3: supplied by regulator-dummy [ 3.220521] vddio-emmc-3v3: supplied by regulator-dummy [ 3.226657] spmic-ldo4: supplied by regulator-dummy [ 3.227774] vdd-usb-3v3: supplied by regulator-dummy [ 3.233815] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.239898] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.245288] spmic-ldo8: supplied by vdd-1v8-ls [ 3.246619] gpio-510 (gpio_default): hogged as output/high [ 3.248232] gpio-511 (gpio_default): hogged as output/high [ 3.255084] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.393448] max77686-rtc max77620-rtc: registered as rtc0 [ 3.394388] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.394732] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.115681] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.116615] hid: raw HID events driver (C) Jiri Kosina [ 4.117314] usbcore: registered new interface driver usbhid [ 4.117458] usbhid: USB HID core driver [ 4.119136] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.120246] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.954230] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.029929] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.509 ms) ÿá[ 4.205548] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.206101] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.206983] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.207650] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.209646] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.210424] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.210905] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.212071] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.212413] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.214335] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.222134] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.228300] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.233680] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.239366] denver_knobs_init:MTS_VERSION:55637613 [ 4.251948] t19x_cache tegra-cache: probed [ 4.256640] optee: probing for conduit method. [ 4.257690] optee: revision 3.16 (65cc2218) [ 4.259096] optee: dynamic shared memory is enabled [ 4.260988] optee: initialized driver [ 4.268606] nvpmodel: initialized successfully [ 4.269419] tegra_hv: get_hvd: not initialized yet [ 4.272945] user_ivc_mempool: hypervisor not present [ 4.278690] usbcore: registered new interface driver snd-usb-audio [ 4.285261] u32 classifier [ 4.286501] input device check on [ 4.290206] Actions configured [ 4.294187] Initializing XFRM netlink socket [ 4.299036] NET: Registered protocol family 10 [ 4.305700] Segment Routing with IPv6 [ 4.306373] NET: Registered protocol family 17 [ 4.310378] NET: Registered protocol family 15 [ 4.315307] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.328783] Bluetooth: RFCOMM socket layer initialized [ 4.333074] Bluetooth: RFCOMM ver 1.11 [ 4.337215] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.342817] Bluetooth: HIDP socket layer initialized [ 4.348896] 9pnet: Installing 9P2000 support [ 4.352585] Key type dns_resolver registered [ 4.357766] registered taskstats version 1 [ 4.360946] Loading compiled-in X.509 certificates [ 4.373435] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.376487] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.387064] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.388859] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.397273] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.405568] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.521232] tegra194-pcie 14160000.pcie: Link up [ 4.524135] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.524379] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.524695] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.525069] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.525357] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.525912] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.526546] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.540565] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.541061] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.541879] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.543521] pci 0004:01:00.0: supports D1 D2 [ 4.543673] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.555249] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.555578] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.555946] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.556519] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.556801] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.557094] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.557454] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.563211] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.572003] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.581997] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.586641] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.592473] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.599230] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.608553] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.609704] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.618417] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.626666] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.742109] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.742700] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.742960] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.743157] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.743675] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.743987] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.744488] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.745024] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.766816] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.767090] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.769062] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.770532] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.771974] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.773766] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.774727] pci 0005:00:00.0: Removing from iommu group 7 [ 5.774988] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.811594] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.837863] host1x 13e10000.host1x: initialized [ 5.839615] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.840579] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.841974] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.842813] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.844219] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.844940] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.846386] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.847375] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.848629] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.849570] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.852296] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.859019] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.869030] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.876222] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.885833] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.893097] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.903153] falcon 15340000.vic: Adding to iommu group 17 [ 5.917718] falcon 15340000.vic: initialized [ 5.918779] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.924151] falcon 15380000.nvjpg: initialized [ 5.924954] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.935827] falcon 154c0000.nvenc: initialized [ 5.936413] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.945720] falcon 15a80000.nvenc1: initialized [ 5.946265] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.959005] nvdec 15480000.nvdec: initialized [ 5.959515] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.970328] nvdec 15140000.nvdec1: initialized [ 5.970876] tsec 15500000.tsec: Adding to iommu group 18 [ 5.976533] tsec 15500000.tsec: initialized [ 5.976992] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.983087] tsec 15100000.tsecb: initialized [ 5.987049] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.016553] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.030348] gpio-374 (wifi-enable): hogged as output/high [ 6.030784] gpio-431 (camera-control-output-low): hogged as output/low [ 6.031221] gpio-432 (camera-control-output-low): hogged as output/low [ 6.032962] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.035085] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.035786] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.037441] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.040103] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.045611] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.051284] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.059461] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.066671] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.078890] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.083250] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.089092] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.097972] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.107612] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.114613] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.121998] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.128534] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.138116] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.144187] pva 16000000.pva0: Adding to iommu group 22 [ 6.172106] pva 16000000.pva0: initialized [ 6.176890] pva 16800000.pva1: Adding to iommu group 23 [ 6.188708] pva 16800000.pva1: initialized [ 6.193337] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.205864] nvdla 15880000.nvdla0: initialized [ 6.207264] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.217101] nvdla 158c0000.nvdla1: initialized [ 6.221258] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.221666] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.221888] tegradc 15200000.display: Adding to iommu group 26 [ 6.222060] tegradc 15210000.display: Adding to iommu group 26 [ 6.222108] tegradccommon 15200000.display-hub: dma mapping done [ 6.223942] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.224470] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.228773] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.229419] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.234961] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.240169] generic_infoframe_type: 0x87 [ 6.246509] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.249932] tegradc 15200000.display: DT parsed successfully [ 6.255816] tegra_cec 3960000.tegra_cec: probed [ 6.261650] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.267316] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.277837] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.282433] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.288205] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.295350] kfuse 3830000.kfuse: initialized [ 6.303303] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.304180] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.307960] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.315394] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.316842] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.321681] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.322339] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.331499] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.335183] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.345692] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.353384] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.359616] tegradc 15210000.display: disp0 connected to head1->sor [ 6.380323] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.387032] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.394080] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.401368] tegradc 15210000.display: DT parsed successfully [ 6.409175] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.414436] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.449254] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.449589] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.451912] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.452998] random: crng init done [ 6.460465] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.472334] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.478887] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.486546] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.493885] usb usb1: Product: xHCI Host Controller [ 6.498437] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.504639] usb usb1: SerialNumber: 3610000.xhci [ 6.510452] hub 1-0:1.0: USB hub found [ 6.513506] hub 1-0:1.0: 4 ports detected [ 6.518263] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.523035] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.530398] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.538052] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.546232] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.553477] usb usb2: Product: xHCI Host Controller [ 6.558488] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.564658] usb usb2: SerialNumber: 3610000.xhci [ 6.570063] hub 2-0:1.0: USB hub found [ 6.573091] hub 2-0:1.0: 4 ports detected [ 6.613954] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.619933] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.621641] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.621818] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.635148] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.636306] tegra194-cpufreq ccplex: probed with BWMGR [ 6.637647] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.638094] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.638579] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.639768] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.649356] mmc0: CQHCI version 5.10 [ 6.649668] tegra194-vi5 15c10000.vi: initialized [ 6.651492] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.652749] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.656858] generic_infoframe_type: 0x87 [ 6.663252] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.667158] tegradc 15200000.display: DT parsed successfully [ 6.675053] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.680787] tegradc 15200000.display: Display dc.00000000d13a9e64 registered with id=0 [ 6.681515] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.684326] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.687339] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.695022] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.695026] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.695364] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.703264] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.711383] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.711559] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.718125] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.725220] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.727144] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.734074] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.740351] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.742631] tegradc 15200000.display: probed [ 6.746656] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.747921] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.770954] mmc0: Command Queue Engine enabled [ 6.784192] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.790940] nvethernet 2490000.ethernet: Macsec not supported [ 6.834724] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.834750] mmc0: periodic cache flush enabled [ 6.834766] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.835116] Console: switching to colour frame buffer device 240x67 [ 6.835662] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.836229] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.836354] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.836493] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.837729] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.842506] tegradc 15200000.display: fb registered [ 6.842571] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.847261] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.890266] tegra-se-nvhost 15810000.se: initialized [ 6.896046] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.919529] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.924337] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.931368] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.931906] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.946142] tegra-se-nvhost 15820000.se: initialized [ 6.951817] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.956936] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.963303] tegra-se-nvhost 15830000.se: initialized [ 6.968718] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.974474] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.980842] tegra-se-nvhost 15840000.se: initialized [ 6.986370] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.986656] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.995195] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.001520] tegra_actmon d230000.actmon: in actmon_register()... [ 7.007932] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.014144] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.016687] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.016693] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.016697] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.016702] usb 1-2: Manufacturer: Generic [ 7.018628] hub 1-2:1.0: USB hub found [ 7.019636] hub 1-2:1.0: 4 ports detected [ 7.022191] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.027532] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.035418] Extcon AUX1(HDMI) enable [ 7.043163] hvc_sysfs: hypervisor is not present [ 7.047240] tegradc 15210000.display: disp1 connected to head1->sor [ 7.089178] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.096399] tegradc 15210000.display: DT parsed successfully [ 7.102204] tegradc 15210000.display: Display dc.000000001dcf276e registered with id=1 [ 7.114779] ALSA device list: [ 7.114884] No soundcards found. [ 7.115198] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.122654] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.129452] tegradc 15210000.display: probed [ 7.133112] tegradc 15210000.display: fb registered [ 7.134106] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.141488] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.147093] Freeing unused kernel memory: 3968K [ 7.152567] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.152652] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.169282] Run /init as init process [ 7.174554] tegradc 15210000.display: blank - powerdown [ 7.179194] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.179198] Extcon DP: HPD disabled [ 7.179202] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.179214] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.187098] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.187106] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.187110] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.187114] usb 2-3: Manufacturer: Generic [ 7.197930] hub 2-3:1.0: USB hub found [ 7.203761] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.214194] hub 2-3:1.0: 4 ports detected [ 7.238426] Root device found: mmcblk0p1 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.247142] tegradc 15200000.display: blank - powerdown [ 7.250069] Found dev node: /dev/mmcblk0p1 [ 7.285096] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.286838] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.286843] Extcon AUX1(HDMI) disable [ 7.289489] Rootfs mounted over mmcblk0p1 [ 7.297211] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.297217] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.309221] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.310569] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.311513] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.320814] Switching from initrd to actual rootfs [ 7.325197] tegradc 15200000.display: unblank [ 7.326272] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.326469] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.332930] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.334801] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.338890] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.338894] Extcon AUX1(HDMI) enable [ 7.351578] tegradc 15200000.display: sync windows ret = 247 [ 7.388417] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.389763] Extcon HDMI: HPD enabled [ 7.391951] tegradc 15200000.display: hdmi: plugged [ 7.458255] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.459703] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.461024] usb 1-3: Product: Bluetooth Radio [ 7.462274] usb 1-3: Manufacturer: Realtek [ 7.463482] usb 1-3: SerialNumber: 00e04c000001 [ 7.484256] systemd[1]: System time before build time, advancing clock. [ 7.557149] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.561875] systemd[1]: Detected architecture arm64. [ 7.606887] systemd[1]: Set hostname to . [ 7.773304] systemd-sysv-generator[243]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.127469] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.129106] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.134608] systemd[1]: Created slice system-modprobe.slice. [ 8.139260] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.143232] systemd[1]: Created slice User and Session Slice. [ 8.146604] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.150668] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.154025] systemd[1]: Reached target User and Group Name Lookups. [ 8.157054] systemd[1]: Reached target Slices. [ 8.160026] systemd[1]: Reached target Swap. [ 8.163734] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.167206] systemd[1]: Listening on Syslog Socket. [ 8.170577] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.173821] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.177900] systemd[1]: Listening on Journal Audit Socket. [ 8.181407] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.184978] systemd[1]: Listening on Journal Socket. [ 8.188502] systemd[1]: Listening on udev Control Socket. [ 8.191810] systemd[1]: Listening on udev Kernel Socket. [ 8.200192] systemd[1]: Mounting Huge Pages File System... [ 8.210312] systemd[1]: Mounting POSIX Message Queue File System... [ 8.220072] systemd[1]: Mounting RPC Pipe File System... [ 8.228574] systemd[1]: Mounting Kernel Debug File System... [ 8.236830] systemd[1]: Mounting Kernel Trace File System... [ 8.246774] systemd[1]: Starting Journal Service... [ 8.255851] systemd[1]: Starting Set the console keyboard layout... [ 8.264392] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.267829] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.274436] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.282726] systemd[1]: Started Nameserver information manager. [ 8.287173] systemd[1]: Reached target Network (Pre). [ 8.294210] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.296096] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.302711] systemd[1]: Starting Load Kernel Modules... [ 8.311633] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.319561] systemd[1]: Starting udev Coldplug all Devices... [ 8.330224] systemd[1]: Mounted Huge Pages File System. [ 8.334218] systemd[1]: Mounted POSIX Message Queue File System. [ 8.337810] systemd[1]: Mounted RPC Pipe File System. [ 8.342409] systemd[1]: Mounted Kernel Debug File System. [ 8.342577] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.343147] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.343955] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.348142] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.348157] nvmap_page_pool_init: Total RAM pages: 1752672 [ 8.348161] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.348451] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.349946] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.355440] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.355459] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.367766] systemd[1]: Mounted Kernel Trace File System. [ 8.375131] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.382445] systemd[1]: nvfb-udev.service: Succeeded. [ 8.386482] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.398557] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.411426] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.413194] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.419901] systemd[1]: Starting Load/Save Random Seed... [ 8.429503] systemd[1]: Starting Create System Users... [ 8.440145] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.440145] [ 8.485662] systemd[1]: Finished Load/Save Random Seed. [ 8.492570] systemd[1]: Finished Load Kernel Modules. [ 8.499114] systemd[1]: Finished Create System Users. [ 8.503302] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.510021] systemd[1]: Mounting Kernel Configuration File System... [ 8.517642] systemd[1]: Started OP-TEE Client Supplicant. [ 8.527669] systemd[1]: Starting Apply Kernel Variables... [ 8.535864] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.546565] systemd[1]: Finished Set the console keyboard layout. [ 8.550570] systemd[1]: Mounted Kernel Configuration File System. [ 9.942019] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.948438] imx219 9-0010: board setup failed [ 9.949774] imx219: probe of 9-0010 failed with error -121 [ 9.962436] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.971524] imx219 10-0010: board setup failed [ 9.971632] imx219: probe of 10-0010 failed with error -121 [ 10.051549] hot-surface-alert cooling state: 0 -> 1 [ 10.643017] using random self ethernet address [ 10.643023] using random host ethernet address [ 11.523189] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.524363] Creating 1 MTD partitions on "spi6.0": [ 11.526378] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.181194] using random self ethernet address [ 12.182328] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.834707] nvidia: loading out-of-tree module taints kernel. [ 58.179014] watchdog: watchdog0: watchdog did not stop! [ 58.650797] Trying to unregister non-registered hwtime source [ 61.708272] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.709913] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] tiÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.310] I> sdmmc DDR50 mode [0001.328] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.345] W> Cannot find any partition table for 00000003 [0001.346] > PARTITION_MANAGER: Failed to publish partition. [0001.362] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.363] I> Active Boot chain : 0 [0002.034] I> Relocating BR-BCT [0002.036] > DEVICE_PROD: device prod is not initialized. [0002.341] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.342] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.343] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.343] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.344] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.344] I> dram_block larger than 80000000 [0002.347] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.358] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.361] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/Tÿâclk_early initialized ÿäC: Noÿâmail_early initialized ÿänÿâfuse initialized hwwdt initialized ÿä-secuÿât194_ec_get_ec_list: found 45 ecs ÿäre externalÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized ÿä ÿâfmon_populate_monitors: found 73 monitors ÿäfound ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized ÿä1ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä 03ÿâdmce initialized ÿä:ÿâcvc initialized ÿä23:20 UTC 20ÿâavfs_clk_mach_post initialized ÿä22 aÿâavfs_clk_platform_post initialized ÿäarcÿâcvc_late initialized regulator_post initialized ÿäh64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNIÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäNG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.210] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.211] I> CPU-BL Params @ 0xca020000 [0003.211] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.212] I> 2) Base:0xc9800000 Size:0x00200000 [0003.212] I> 3) Base:0xc8600000 Size:0x00200000 [0003.215] I> 4) Base:0xc8200000 Size:0x00100000 [0003.219] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.228] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.237] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.246] I> 11) Base:0x40000000 Size:0x00040000 [0003.250] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.255] I> 13) Base:0x40046000 Size:0x00002000 [0003.259] I> 14) Base:0x40048000 Size:0x00002000 [0003.264] I> 15) Base:0xaf000000 Size:0x00004000 [0003.268] I> 16) Base:0x4004a000 Size:0x00002000 [0003.273] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.277] I> 18) Base:0x4004c000 Size:0x00002000 [0003.282] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.286] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.295] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.304] I> 24) Base:0xcc000000 Size:0x02000000 [0003.308] I> 25) Base:0x40050000 Size:0x00002000 [0003.313] I> 26) Base:0x40040000 Size:0x00006000 [0003.317] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.322] I> 28) Base:0xc8400000 Size:0x00200000 [0003.326] I> 29) Base:0xc8800000 Size:0x00400000 [0003.331] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.335] I> 31) Base:0x00000000 Size:0x00000000 [0003.340] I> 32) Base:0xf8000000 Size:0x08000000 [0003.344] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.353] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.362] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.371] I> 39) Base:0xb0000000 Size:0x08000000 [0003.375] I> 40) Base:0x00000000 Size:0x00000000 [0003.380] I> 41) Base:0x00000000 Size:0x00000000 [0003.384] I> 42) Base:0x00000000 Size:0x00000000 [0003.389] I> 43) Base:0x00000000 Size:0x00000000 [0003.393] I> 44) Base:0x00000000 Size:0x00000000 [0003.398] I> 45) Base:0x00000000 Size:0x00000000 [0003.402] GIC-SPI Target CPU: 0 [0003.405] Interrupts Init done [0003.408] calling constructors [0003.411] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.418] initializing threads [0003.421] initializing timers [0003.423] creating bootstrap completion thread [0003.428] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.435] initializing platform [0003.438] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.447] I> Bl_dtb @0xadf00000 [0003.450] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.499] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.510] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.517] I> QSPI source rate = 204000 Khz [0003.520] I> Requested rate for QSPI clock = 34000 Khz [0003.525] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.530] I> tx_clk_tap_delay : 0 [0003.533] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.544] I> Qspi initialized successfully [0003.544] I> qspi flash-0 params source = boot args [0003.549] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.557] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.566] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.575] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> hdmi cable connected [0003.610] W> set volts not configured for 'vdd-1v0' [0003.615] W> set volts not configured for 'vdd-1v8-hs' [0003.616] I> retrieved tmds range from prod_list_hdmi_soc [0003.621] E> invalid display type [0003.622] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.651] I> edid read success [0003.651] I> width = 640, height = 480, frequency = 25174825 [0003.652] I> width = 1920, height = 1080, frequency = 148500000 [0003.652] I> width = 1280, height = 768, frequency = 79500000 [0003.652] I> width = 1360, height = 768, frequency = 85500000 [0003.653] I> width = 720, height = 480, frequency = 26973026 [0003.657] I> width = 720, height = 576, frequency = 26973026 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 4096, height = 2160, frequency = 296703296 [0003.725] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.736] I> hdmi_enable, starting HDMI initialisation [0003.741] I> hdmi_enable, HDMI initialisation complete [0003.751] initializing target [0003.751] calling apps_init() [0003.752] starting app kernel_boot_app [0003.753] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000675] Console: colour dummy device 80x25 [ 0.002163] printk: console [tty0] enabled [ 0.002231] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002270] pid_max: default: 32768 minimum: 301 [ 0.002441] LSM: Security Framework initializing [ 0.002500] Yama: becoming mindful. [ 0.002548] SELinux: Initializing. [ 0.002704] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002760] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005588] rcu: Hierarchical SRCU implementation. [ 0.005880] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006597] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006647] DTB Build time: Aug 10 2022 20:31:49 [ 0.009573] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009839] Remapping and enabling EFI services. [ 0.011813] smp: Bringing up secondary CPUs ... [ 0.040983] Detected PIPT I-cache on CPU1 [ 0.041092] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073307] Detected PIPT I-cache on CPU2 [ 0.073452] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103076] Detected PIPT I-cache on CPU3 [ 0.103214] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133009] Detected PIPT I-cache on CPU4 [ 0.133111] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163008] Detected PIPT I-cache on CPU5 [ 0.163109] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163460] smp: Brought up 1 node, 6 CPUs [ 0.163681] SMP: Total of 6 processors activated. [ 0.163724] CPU features: detected: Privileged Access Never [ 0.163756] CPU features: detected: LSE atomic instructions [ 0.163770] CPU features: detected: User Access Override [ 0.163783] CPU features: detected: 32-bit EL0 Support [ 0.163795] CPU features: detected: RAS Extension Support [ 0.163807] CPU features: detected: CRC32 instructions [ 0.163820] CPU features: detected: 32-bit EL1 Support [ 0.232804] CPU: All CPU(s) started at EL2 [ 0.238068] devtmpfs: initialized [ 0.285717] Registered cp15_barrier emulation handler [ 0.285845] Registered setend emulation handler [ 0.285868] KASLR enabled [ 0.286186] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286210] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287521] pinctrl core: initialized pinctrl subsystem [ 0.288545] SMBIOS 3.0.0 present. [ 0.288574] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289281] NET: Registered protocol family 16 [ 0.291665] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292163] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293072] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.293165] audit: initializing netlink subsys (disabled) [ 0.293443] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293895] thermal_sys: Registered thermal governor 'step_wise' [ 0.293901] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293915] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.296130] cpuidle: using governor menu [ 0.296924] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297335] ASID allocator initialised with 32768 entries [ 0.297597] Serial: AMBA PL011 UART driver [ 0.301009] Tegra reboot handler registered. [ 0.368091] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.368217] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.368401] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.368442] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.368562] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.368601] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.368713] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.368755] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.368877] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.368916] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.371085] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.371139] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.371167] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.371212] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.371242] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.371280] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.371305] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.371328] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.371351] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.371374] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.371397] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.371420] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.371443] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.371466] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.371488] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.371512] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.371535] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.371687] mc-err: mcerr ops are set to t19x [ 0.384407] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.384430] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.384443] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.384455] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.391449] ACPI: Interpreter disabled. [ 0.392662] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.393962] iommu: Default domain type: Translated [ 0.394020] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.394381] SCSI subsystem initialized [ 0.394539] usbcore: registered new interface driver usbfs [ 0.394583] usbcore: registered new interface driver hub [ 0.394620] usbcore: registered new device driver usb [ 0.394984] mc: Linux media interface: v0.10 [ 0.395014] videodev: Linux video capture interface: v2.00 [ 0.395307] pps_core: LinuxPPS API ver. 1 registered [ 0.395321] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.395344] PTP clock support registered [ 0.395568] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.395921] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.396029] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.396642] Registered efivars operations [ 0.401826] FPGA manager framework [ 0.401978] Advanced Linux Sound Architecture Driver Initialized. [ 0.402523] Bluetooth: Core ver 2.22 [ 0.402560] NET: Registered protocol family 31 [ 0.402572] Bluetooth: HCI device and connection manager initialized [ 0.402588] Bluetooth: HCI socket layer initialized [ 0.402603] Bluetooth: L2CAP socket layer initialized [ 0.402630] Bluetooth: SCO socket layer initialized [ 0.404013] camchar: rtcpu character device driver loaded [ 0.404951] clocksource: Switched to clocksource arch_sys_counter [ 0.755031] VFS: Disk quotas dquot_6.6.0 [ 0.755111] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.755432] pnp: PnP ACPI: disabled [ 0.765493] la/ptsa driver initialized. [ 0.765643] NET: Registered protocol family 2 [ 0.765822] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.770391] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.770478] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.770789] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.771222] TCP: Hash tables configured (established 65536 bind 65536) [ 0.771352] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.771439] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.771644] NET: Registered protocol family 1 [ 0.772418] RPC: Registered named UNIX socket transport module. [ 0.772432] RPC: Registered udp transport module. [ 0.772442] RPC: Registered tcp transport module. [ 0.772450] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.772477] PCI: CLS 0 bytes, default 64 [ 0.772712] Trying to unpack rootfs image as initramfs... [ 0.964032] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.966351] Freeing initrd memory: 8196K [ 0.970538] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.970586] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.970631] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.971035] kvm [1]: IPA Size Limit: 40 bits [ 0.971583] kvm [1]: vgic interrupt IRQ9 [ 0.972091] kvm [1]: VHE mode initialized successfully [ 0.973528] Initialise system trusted keyrings [ 0.973814] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.978432] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.979120] NFS: Registering the id_resolver key type [ 0.979150] Key type id_resolver registered [ 0.979160] Key type id_legacy registered [ 0.979232] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.979250] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.979276] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.987278] NET: Registered protocol family 38 [ 0.987323] Key type asymmetric registered [ 0.987335] Asymmetric key parser 'x509' registered [ 0.987380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.987638] io scheduler mq-deadline registered [ 0.987652] io scheduler kyber registered [ 0.993714] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.996727] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.996802] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.996870] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.996935] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.997048] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.002838] scrncapt: init (heads:4 wins:6 planes:4) [ 1.003080] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.003958] EINJ: ACPI disabled. [ 1.007458] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.007483] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.007497] tegra-pmc: ### PMC reset level: L1 [ 1.007510] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.007557] tegra-pmc: PMC Prod config success [ 1.013222] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.043225] random: fast init done [ 1.052724] printk: console [ttyTCU0] enabled [ 2.570828] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.575457] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.580029] arm-smmu 10000000.iommu: stage 1 translation [ 2.585374] arm-smmu 10000000.iommu: stage 2 translation [ 2.591187] arm-smmu 10000000.iommu: nested translation [ 2.596088] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.603277] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.615039] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.616617] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.623203] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.630720] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.636243] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.640967] arm-smmu 12000000.iommu: stage 1 translation [ 2.646232] arm-smmu 12000000.iommu: stage 2 translation [ 2.651898] arm-smmu 12000000.iommu: nested translation [ 2.657078] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.664256] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.675727] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.677627] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.684186] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.691442] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.701438] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.704343] tegra_profiler: auth: init [ 2.708843] THERMAL EST: found 3 subdevs [ 2.712030] THERMAL EST num_resources: 0 [ 2.716128] [THERMAL EST subdev 0] [ 2.719196] [THERMAL EST subdev 1] [ 2.722862] [THERMAL EST subdev 2] [ 2.725848] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.732313] THERMAL EST: thz register success. [ 2.736559] THERMAL EST: end of probe, return err: 0 [ 2.742210] nvsciipc: loaded module [ 2.749204] tun: Universal TUN/TAP device driver, 1.6 [ 2.751248] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.757622] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.763430] e1000e: Intel(R) PRO/1000 Network Driver [ 2.768107] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.774449] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.779736] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.785842] PPP generic driver version 2.4.2 [ 2.790186] PPP BSD Compression module registered [ 2.794713] PPP Deflate Compression module registered [ 2.799967] PPP MPPE Compression module registered [ 2.804714] usbcore: registered new interface driver r8152 [ 2.810271] usbcore: registered new interface driver asix [ 2.815820] usbcore: registered new interface driver ax88179_178a [ 2.821946] usbcore: registered new interface driver cdc_ether [ 2.827644] usbcore: registered new interface driver net1080 [ 2.833230] usbcore: registered new interface driver cdc_subset [ 2.839525] usbcore: registered new interface driver zaurus [ 2.845227] usbcore: registered new interface driver cdc_ncm [ 2.850906] usbcore: registered new interface driver aqc111 [ 2.856532] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.862665] ohci-pci: OHCI PCI platform driver [ 2.866660] ohci-platform: OHCI generic platform driver [ 2.872569] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.879049] usbcore: registered new interface driver uas [ 2.883233] usbcore: registered new interface driver usb-storage [ 2.889152] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.895396] mousedev: PS/2 mouse device common for all mice [ 2.900365] usbcore: registered new interface driver xpad [ 2.908144] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.910891] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.918651] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.925459] i2c /dev entries driver [ 2.928496] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.934314] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.939956] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.945302] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.950603] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.956131] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.961587] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.974633] device-mapper: uevent: version 1.0.3 [ 2.975091] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.982108] cpuidle: Initializing cpuidle driver [ 2.985959] sdhci: Secure Digital Host Controller Interface driver [ 2.990717] sdhci: Copyright(c) Pierre Ossman [ 2.994815] Synopsys Designware Multimedia Card Interface Driver [ 3.000770] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.006942] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.007783] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.020062] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.042796] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.052854] vdd-1v0: supplied by regulator-dummy [ 3.058405] vdd-1v8-hs: supplied by regulator-dummy [ 3.063426] vdd-1v8-ls: supplied by regulator-dummy [ 3.068283] vdd-1v8-ao: supplied by regulator-dummy [ 3.072357] vddio-ddr-1v1: supplied by regulator-dummy [ 3.076857] vdd-rtc: supplied by regulator-dummy [ 3.078720] spmic-ldo1: supplied by regulator-dummy [ 3.079984] vdd-ao-3v3: supplied by regulator-dummy [ 3.086250] vddio-emmc-3v3: supplied by regulator-dummy [ 3.092569] spmic-ldo4: supplied by regulator-dummy [ 3.093940] vdd-usb-3v3: supplied by regulator-dummy [ 3.100244] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.106558] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.112102] spmic-ldo8: supplied by vdd-1v8-ls [ 3.113671] gpio-510 (gpio_default): hogged as output/high [ 3.115018] gpio-511 (gpio_default): hogged as output/high [ 3.117911] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.253868] max77686-rtc max77620-rtc: registered as rtc0 [ 3.255211] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.255599] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.099216] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.100291] hid: raw HID events driver (C) Jiri Kosina [ 4.101205] usbcore: registered new interface driver usbhid [ 4.101350] usbhid: USB HID core driver [ 4.103382] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.104725] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.109858] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.184284] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.235 ms) ÿá[ 4.189247] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.189828] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.191106] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.191959] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.193804] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.194473] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.195063] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.196408] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.196682] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.199439] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.205726] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.211717] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.217317] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.223557] denver_knobs_init:MTS_VERSION:55637613 [ 4.235397] t19x_cache tegra-cache: probed [ 4.238461] optee: probing for conduit method. [ 4.239316] optee: revision 3.16 (65cc2218) [ 4.240462] optee: dynamic shared memory is enabled [ 4.244073] optee: initialized driver [ 4.250789] nvpmodel: initialized successfully [ 4.251757] tegra_hv: get_hvd: not initialized yet [ 4.256537] user_ivc_mempool: hypervisor not present [ 4.262497] usbcore: registered new interface driver snd-usb-audio [ 4.269478] u32 classifier [ 4.270263] input device check on [ 4.274051] Actions configured [ 4.277346] Initializing XFRM netlink socket [ 4.282179] NET: Registered protocol family 10 [ 4.289322] Segment Routing with IPv6 [ 4.289635] NET: Registered protocol family 17 [ 4.294155] NET: Registered protocol family 15 [ 4.298339] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.311810] Bluetooth: RFCOMM socket layer initialized [ 4.316587] Bluetooth: RFCOMM ver 1.11 [ 4.320704] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.326369] Bluetooth: HIDP socket layer initialized [ 4.332602] 9pnet: Installing 9P2000 support [ 4.335789] Key type dns_resolver registered [ 4.341753] registered taskstats version 1 [ 4.344447] Loading compiled-in X.509 certificates [ 4.357595] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.360047] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.370748] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.372085] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.381036] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.389054] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.505119] tegra194-pcie 14160000.pcie: Link up [ 4.508245] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.508513] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.508726] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.509066] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.509250] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.509671] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.510121] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.522978] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.523570] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.524068] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.525656] pci 0004:01:00.0: supports D1 D2 [ 4.525818] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.536727] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.537259] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.537495] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.537902] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.538148] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.538458] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.539658] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.547082] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.555849] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.565803] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.570497] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.576124] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.583211] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.592100] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.593539] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.602266] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.610545] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.725830] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.726424] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.726680] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.726871] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.727119] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.727408] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.727917] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.728361] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.749571] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.749994] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.751655] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.752826] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.754275] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.756114] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.757116] pci 0005:00:00.0: Removing from iommu group 7 [ 5.757504] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.790092] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.810796] host1x 13e10000.host1x: initialized [ 5.812343] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.813465] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.814807] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.815572] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.816843] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.817706] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.818679] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.819358] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.820240] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.825817] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.835761] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.842912] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.852748] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.859923] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.870058] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.876741] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.886973] falcon 15340000.vic: Adding to iommu group 17 [ 5.900579] falcon 15340000.vic: initialized [ 5.901535] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.907506] falcon 15380000.nvjpg: initialized [ 5.908169] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.919357] falcon 154c0000.nvenc: initialized [ 5.919946] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.929361] falcon 15a80000.nvenc1: initialized [ 5.929934] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.941524] nvdec 15480000.nvdec: initialized [ 5.942182] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.951199] nvdec 15140000.nvdec1: initialized [ 5.951663] tsec 15500000.tsec: Adding to iommu group 18 [ 5.958084] tsec 15500000.tsec: initialized [ 5.958529] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.966711] tsec 15100000.tsecb: initialized [ 5.970164] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.994867] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.005893] gpio-374 (wifi-enable): hogged as output/high [ 6.006200] gpio-431 (camera-control-output-low): hogged as output/low [ 6.006474] gpio-432 (camera-control-output-low): hogged as output/low [ 6.008009] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.009867] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.011243] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.018423] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.023465] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.029425] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.034782] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.042820] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.050324] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.061733] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.067103] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.072922] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.081754] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.091276] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.098380] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.105705] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.112012] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.121630] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.128194] pva 16000000.pva0: Adding to iommu group 22 [ 6.153936] pva 16000000.pva0: initialized [ 6.158274] pva 16800000.pva1: Adding to iommu group 23 [ 6.169092] pva 16800000.pva1: initialized [ 6.172926] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.184660] nvdla 15880000.nvdla0: initialized [ 6.186359] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.194112] nvdla 158c0000.nvdla1: initialized [ 6.196601] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.196872] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.197388] tegradccommon 15200000.display-hub: dma mapping done [ 6.199577] tegradc 15200000.display: Adding to iommu group 26 [ 6.208132] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.208510] generic_infoframe_type: 0x87 [ 6.208784] tegradc 15200000.display: DT parsed successfully [ 6.210059] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.211322] tegradc 15210000.display: Adding to iommu group 26 [ 6.216173] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.216939] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.236848] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.242262] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.242846] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.250057] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.255784] tegra_cec 3960000.tegra_cec: probed [ 6.263717] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.277001] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.277465] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.282542] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.294695] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.344845] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.344853] ************************************** [ 6.344856] CPU:0, Error:cbb-noc [ 6.344862] Error Logger : 0 [ 6.344884] ErrLog0 : 0x80030000 [ 6.344888] Transaction Type : RD - Read, Incrementing [ 6.344891] Error Code : SLV [ 6.344895] Error Source : Target [ 6.344898] Error Description : Target error detected by CBB slave [ 6.344937] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8195x57005 (on 0x0mm) pclk=148350937 [ 6.344950] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.344962] Packet header Lock : 0 [ 6.344966] Packet header Len1 : 3 [ 6.344980] NOC protocol version : version >= 2.7 [ 6.344984] ErrLog1 : 0x350e2a [ 6.344988] ErrLog2 : 0x0 [ 6.344991] RouteId : 0x350e2a [ 6.344999] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.345003] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.345005] TargSubRange : 7 [ 6.345009] SeqId : 0 [ 6.345011] ErrLog3 : 0x101c [ 6.345015] ErrLog4 : 0x0 [ 6.345022] Address accessed : 0x1520101c [ 6.345025] ErrLog5 : 0xa89f851 [ 6.345029] Non-Modify : 0x1 [ 6.345031] AXI ID : 0x15 [ 6.345036] Master ID : CCPLEX [ 6.345041] Security Group(GRPSEC): 0x7e [ 6.345044] Cache : 0x1 -- Bufferable [ 6.345048] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.345051] FALCONSEC : 0x0 [ 6.345053] Virtual Queuing Channel(VQC): 0x0 [ 6.345059] ************************************** [ 6.345174] ------------[ cut here ]------------ [ 6.345181] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.345195] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.345210] Modules linked in: [ 6.345242] CPU: 0 PID: 145 Comm: kworker/0:6 Not tainted 5.10.104-tegra #1 [ 6.345246] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.345314] Workqueue: events tegra_cec_init_worker [ 6.345328] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.345349] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 6.345356] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 6.345378] sp : ffff800010003b30 [ 6.345389] x29: ffff800010003b30 x28: 0000000000000001 [ 6.345405] x27: 0000000000000005 x26: ffffaef124b03f58 [ 6.345413] x25: ffffaef12545ce10 x24: 0000000000000001 [ 6.345421] x23: ffffaef124df7000 x22: ffffaef12527ea00 [ 6.345427] x21: 000000000000000f x20: ffff3fd480e66180 [ 6.345434] x19: ffffaef12527ea00 x18: 0000000000000020 [ 6.345442] x17: ffff80001057e000 x16: 0000000000000068 [ 6.345449] x15: ffff3fd483a66af0 x14: ffffffffffffffff [ 6.345455] x13: ffffaef12540ade8 x12: ffffaef12540aa2d [ 6.345462] x11: 0000000000000038 x10: 0101010101010101 [ 6.345474] x9 : ffff800010003a40 x8 : 2a2a2a2a2a2a2a2a [ 6.345483] x7 : 2a2a2a2a2a2a2a2a x6 : 000000002ad907b0 [ 6.345499] x5 : 000000000000000c x4 : 00000000fffff256 [ 6.345506] x3 : 00000000ffffffff x2 : ffffaef12359e090 [ 6.345513] x1 : ffff3fd483a66580 x0 : 0000000000010101 [ 6.345524] Call trace: [ 6.345530] tegra194_cbb_err_isr+0x190/0x1b0 [ 6.345553] __handle_irq_event_percpu+0x68/0x2a0 [ 6.345558] handle_irq_event_percpu+0x40/0xa0 [ 6.345564] handle_irq_event+0x50/0xf0 [ 6.345571] handle_fasteoi_irq+0xc0/0x170 [ 6.345580] generic_handle_irq+0x40/0x60 [ 6.345586] __handle_domain_irq+0x70/0xd0 [ 6.345596] efi_header_end+0xb0/0xf0 [ 6.345602] el1_irq+0xd0/0x180 [ 6.345606] __do_softirq+0xb4/0x3e8 [ 6.345624] irq_exit+0xc0/0xe0 [ 6.345628] __handle_domain_irq+0x74/0xd0 [ 6.345632] efi_header_end+0xb0/0xf0 [ 6.345636] el1_irq+0xd0/0x180 [ 6.345641] console_unlock+0x36c/0x540 [ 6.345646] vprintk_emit+0x124/0x2a0 [ 6.345657] dev_vprintk_emit+0x154/0x184 [ 6.345662] dev_printk_emit+0x80/0xa8 [ 6.345666] __dev_printk+0x7c/0xa4 [ 6.345671] _dev_notice+0x74/0x9c [ 6.345675] tegra_cec_init_worker+0x7c/0x660 [ 6.345692] process_one_work+0x1c4/0x4a0 [ 6.345696] worker_thread+0x54/0x430 [ 6.345705] kthread+0x148/0x170 [ 6.345713] ret_from_fork+0x10/0x24 [ 6.345727] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 6.345761] ---[ end trace 0c3ad485362bf634 ]--- [ 6.345769] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 6.345774] SMP: stopping secondary CPUs [ 6.345820] Kernel Offset: 0x2ef1133e0000 from 0xffff800010000000 [ 6.345823] PHYS_OFFSET: 0xffffc02c80000000 [ 6.345888] CPU features: 0x8240002,03802a30 [ 6.345894] Memory Limit: none [ 6.727516] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 65500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.325] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized pm_post initialized dbells initialized ÿä11 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.619] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.649] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.650] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.723] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.739] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.750] calling apps_init() [0003.750] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000673] Console: colour dummy device 80x25 [ 0.002278] printk: console [tty0] enabled [ 0.002340] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002378] pid_max: default: 32768 minimum: 301 [ 0.002567] LSM: Security Framework initializing [ 0.002658] Yama: becoming mindful. [ 0.002728] SELinux: Initializing. [ 0.002882] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002931] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005817] rcu: Hierarchical SRCU implementation. [ 0.006158] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007033] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007088] DTB Build time: Aug 10 2022 20:31:49 [ 0.009973] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010224] Remapping and enabling EFI services. [ 0.012255] smp: Bringing up secondary CPUs ... [ 0.041578] Detected PIPT I-cache on CPU1 [ 0.041653] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071504] Detected PIPT I-cache on CPU2 [ 0.071603] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101251] Detected PIPT I-cache on CPU3 [ 0.101343] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131130] Detected PIPT I-cache on CPU4 [ 0.131234] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160956] Detected PIPT I-cache on CPU5 [ 0.161025] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161411] smp: Brought up 1 node, 6 CPUs [ 0.161667] SMP: Total of 6 processors activated. [ 0.161741] CPU features: detected: Privileged Access Never [ 0.161768] CPU features: detected: LSE atomic instructions [ 0.161787] CPU features: detected: User Access Override [ 0.161805] CPU features: detected: 32-bit EL0 Support [ 0.161824] CPU features: detected: RAS Extension Support [ 0.161843] CPU features: detected: CRC32 instructions [ 0.161862] CPU features: detected: 32-bit EL1 Support [ 0.231420] CPU: All CPU(s) started at EL2 [ 0.236451] devtmpfs: initialized [ 0.289219] Registered cp15_barrier emulation handler [ 0.289300] Registered setend emulation handler [ 0.289326] KASLR enabled [ 0.289592] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289629] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291245] pinctrl core: initialized pinctrl subsystem [ 0.292376] SMBIOS 3.0.0 present. [ 0.292409] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.293142] NET: Registered protocol family 16 [ 0.295313] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295824] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296550] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296638] audit: initializing netlink subsys (disabled) [ 0.296988] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.297409] thermal_sys: Registered thermal governor 'step_wise' [ 0.297415] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297435] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299621] cpuidle: using governor menu [ 0.299910] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300373] ASID allocator initialised with 32768 entries [ 0.300609] Serial: AMBA PL011 UART driver [ 0.303687] Tegra reboot handler registered. [ 0.375972] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.376152] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.376363] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376422] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376554] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376612] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376756] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.376835] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376984] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.377045] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379745] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379795] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.379837] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379880] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379921] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379959] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.380013] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.380056] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.380091] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.380126] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.380161] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.380195] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.380230] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.380284] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.380322] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.380372] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.380409] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.380535] mc-err: mcerr ops are set to t19x [ 0.392849] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392877] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.392897] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392915] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399731] ACPI: Interpreter disabled. [ 0.400942] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.402227] iommu: Default domain type: Translated [ 0.402313] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.402842] SCSI subsystem initialized [ 0.403049] usbcore: registered new interface driver usbfs [ 0.403111] usbcore: registered new interface driver hub [ 0.403155] usbcore: registered new device driver usb [ 0.403549] mc: Linux media interface: v0.10 [ 0.403583] videodev: Linux video capture interface: v2.00 [ 0.403896] pps_core: LinuxPPS API ver. 1 registered [ 0.403912] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403943] PTP clock support registered [ 0.404146] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404496] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.404588] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.405224] Registered efivars operations [ 0.411326] FPGA manager framework [ 0.411451] Advanced Linux Sound Architecture Driver Initialized. [ 0.412155] Bluetooth: Core ver 2.22 [ 0.412197] NET: Registered protocol family 31 [ 0.412235] Bluetooth: HCI device and connection manager initialized [ 0.412261] Bluetooth: HCI socket layer initialized [ 0.412289] Bluetooth: L2CAP socket layer initialized [ 0.412334] Bluetooth: SCO socket layer initialized [ 0.414008] camchar: rtcpu character device driver loaded [ 0.414772] clocksource: Switched to clocksource arch_sys_counter [ 0.713002] VFS: Disk quotas dquot_6.6.0 [ 0.713124] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.713510] pnp: PnP ACPI: disabled [ 0.726649] la/ptsa driver initialized. [ 0.726855] NET: Registered protocol family 2 [ 0.727039] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.733387] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.733511] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.733782] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.734223] TCP: Hash tables configured (established 65536 bind 65536) [ 0.734358] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.734460] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.734688] NET: Registered protocol family 1 [ 0.735702] RPC: Registered named UNIX socket transport module. [ 0.735750] RPC: Registered udp transport module. [ 0.735773] RPC: Registered tcp transport module. [ 0.735795] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.735830] PCI: CLS 0 bytes, default 64 [ 0.736200] Trying to unpack rootfs image as initramfs... [ 1.014507] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.017421] Freeing initrd memory: 8196K [ 1.021967] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.022011] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.022061] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.022425] kvm [1]: IPA Size Limit: 40 bits [ 1.022922] kvm [1]: vgic interrupt IRQ9 [ 1.023405] kvm [1]: VHE mode initialized successfully [ 1.024843] Initialise system trusted keyrings [ 1.025137] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.031555] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.032445] NFS: Registering the id_resolver key type [ 1.032489] Key type id_resolver registered [ 1.032517] Key type id_legacy registered [ 1.032647] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.032709] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.032782] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.043077] NET: Registered protocol family 38 [ 1.043109] Key type asymmetric registered [ 1.043160] Asymmetric key parser 'x509' registered [ 1.043226] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.043541] io scheduler mq-deadline registered [ 1.043566] io scheduler kyber registered [ 1.051600] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.057227] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.057345] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.057451] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.057560] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.057664] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.067118] scrncapt: init (heads:4 wins:6 planes:4) [ 1.067515] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.068479] EINJ: ACPI disabled. [ 1.072065] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.072141] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.072171] tegra-pmc: ### PMC reset level: L1 [ 1.072194] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.072260] tegra-pmc: PMC Prod config success [ 1.077784] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.082647] random: fast init done [ 1.082905] printk: console [ttyTCU0] enabled [ 2.634965] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.639793] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.644329] arm-smmu 10000000.iommu: stage 1 translation [ 2.649831] arm-smmu 10000000.iommu: stage 2 translation [ 2.655343] arm-smmu 10000000.iommu: nested translation [ 2.660686] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.667878] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.676960] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.681255] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.687552] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.695321] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.700859] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.705319] arm-smmu 12000000.iommu: stage 1 translation [ 2.710825] arm-smmu 12000000.iommu: stage 2 translation [ 2.716525] arm-smmu 12000000.iommu: nested translation [ 2.721933] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.728878] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.737982] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.741996] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.748561] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.755866] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.765572] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.769331] tegra_profiler: auth: init [ 2.773194] THERMAL EST: found 3 subdevs [ 2.776920] THERMAL EST num_resources: 0 [ 2.780479] [THERMAL EST subdev 0] [ 2.784078] [THERMAL EST subdev 1] [ 2.787213] [THERMAL EST subdev 2] [ 2.790445] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.796852] THERMAL EST: thz register success. [ 2.801409] THERMAL EST: end of probe, return err: 0 [ 2.806656] nvsciipc: loaded module [ 2.813210] tun: Universal TUN/TAP device driver, 1.6 [ 2.815911] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.822229] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.828037] e1000e: Intel(R) PRO/1000 Network Driver [ 2.832966] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.839034] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.844345] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.850268] PPP generic driver version 2.4.2 [ 2.854835] PPP BSD Compression module registered [ 2.859326] PPP Deflate Compression module registered [ 2.864305] PPP MPPE Compression module registered [ 2.869586] usbcore: registered new interface driver r8152 [ 2.874829] usbcore: registered new interface driver asix [ 2.880413] usbcore: registered new interface driver ax88179_178a [ 2.886536] usbcore: registered new interface driver cdc_ether [ 2.892492] usbcore: registered new interface driver net1080 [ 2.897834] usbcore: registered new interface driver cdc_subset [ 2.904124] usbcore: registered new interface driver zaurus [ 2.909818] usbcore: registered new interface driver cdc_ncm [ 2.915498] usbcore: registered new interface driver aqc111 [ 2.921141] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.926967] ohci-pci: OHCI PCI platform driver [ 2.931282] ohci-platform: OHCI generic platform driver [ 2.937002] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.943328] usbcore: registered new interface driver uas [ 2.947811] usbcore: registered new interface driver usb-storage [ 2.953892] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.959701] mousedev: PS/2 mouse device common for all mice [ 2.964977] usbcore: registered new interface driver xpad [ 2.972634] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.975487] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.983241] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.990015] i2c /dev entries driver [ 2.993128] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.999094] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.004489] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.009868] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.015188] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.020660] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.025827] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.037699] device-mapper: uevent: version 1.0.3 [ 3.038131] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.046268] cpuidle: Initializing cpuidle driver [ 3.050322] sdhci: Secure Digital Host Controller Interface driver [ 3.055324] sdhci: Copyright(c) Pierre Ossman [ 3.059165] Synopsys Designware Multimedia Card Interface Driver [ 3.065572] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.071488] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.072062] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.084631] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.102680] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.111189] vdd-1v0: supplied by regulator-dummy [ 3.116691] vdd-1v8-hs: supplied by regulator-dummy [ 3.121359] vdd-1v8-ls: supplied by regulator-dummy [ 3.125977] vdd-1v8-ao: supplied by regulator-dummy [ 3.129772] vddio-ddr-1v1: supplied by regulator-dummy [ 3.134001] vdd-rtc: supplied by regulator-dummy [ 3.135572] spmic-ldo1: supplied by regulator-dummy [ 3.136665] vdd-ao-3v3: supplied by regulator-dummy [ 3.142828] vddio-emmc-3v3: supplied by regulator-dummy [ 3.149012] spmic-ldo4: supplied by regulator-dummy [ 3.150115] vdd-usb-3v3: supplied by regulator-dummy [ 3.156123] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.162151] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.167748] spmic-ldo8: supplied by vdd-1v8-ls [ 3.169263] gpio-510 (gpio_default): hogged as output/high [ 3.171347] gpio-511 (gpio_default): hogged as output/high [ 3.178489] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.316846] max77686-rtc max77620-rtc: registered as rtc0 [ 3.317795] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.318080] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.014894] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.015964] hid: raw HID events driver (C) Jiri Kosina [ 4.016668] usbcore: registered new interface driver usbhid [ 4.016812] usbhid: USB HID core driver [ 4.018664] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.019885] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.119685] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.194764] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 75.887 ms) ÿá[ 4.104835] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.105361] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.106335] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.107187] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.108850] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.109484] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.110018] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.111617] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.111901] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.113729] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.120971] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.127447] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.132599] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.138804] denver_knobs_init:MTS_VERSION:55637613 [ 4.151341] t19x_cache tegra-cache: probed [ 4.154459] optee: probing for conduit method. [ 4.155511] optee: revision 3.16 (65cc2218) [ 4.156448] optee: dynamic shared memory is enabled [ 4.159922] optee: initialized driver [ 4.166459] nvpmodel: initialized successfully [ 4.167294] tegra_hv: get_hvd: not initialized yet [ 4.171969] user_ivc_mempool: hypervisor not present [ 4.178070] usbcore: registered new interface driver snd-usb-audio [ 4.184649] u32 classifier [ 4.185982] input device check on [ 4.189607] Actions configured [ 4.193389] Initializing XFRM netlink socket [ 4.198127] NET: Registered protocol family 10 [ 4.205034] Segment Routing with IPv6 [ 4.205468] NET: Registered protocol family 17 [ 4.209739] NET: Registered protocol family 15 [ 4.214320] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.227794] Bluetooth: RFCOMM socket layer initialized [ 4.232574] Bluetooth: RFCOMM ver 1.11 [ 4.236184] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.242285] Bluetooth: HIDP socket layer initialized [ 4.247775] 9pnet: Installing 9P2000 support [ 4.251461] Key type dns_resolver registered [ 4.257114] registered taskstats version 1 [ 4.260223] Loading compiled-in X.509 certificates [ 4.272747] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.275886] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.285811] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.288135] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.296446] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.305041] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.422892] tegra194-pcie 14160000.pcie: Link up [ 4.426017] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.426310] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.426449] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.426786] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.427147] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.427531] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.428000] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.441536] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.442000] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.442547] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.444163] pci 0004:01:00.0: supports D1 D2 [ 4.444338] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.456563] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.456913] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.457216] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.457648] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.457912] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.458164] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.458409] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.464881] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.473617] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.483557] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.488285] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.493752] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.500720] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.509545] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.511319] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.520028] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.528238] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.643691] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.644133] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.644387] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.644617] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.644835] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.645135] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.645607] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.646032] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.667876] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.668193] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.669756] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.671211] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.672441] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.673755] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.674996] pci 0005:00:00.0: Removing from iommu group 7 [ 5.675257] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.715158] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.739618] host1x 13e10000.host1x: initialized [ 5.741300] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.742179] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.743587] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.744209] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.745396] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.746052] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.747147] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.747820] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.748720] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.749384] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.753553] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.760751] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.770548] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.777851] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.787826] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.794505] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.804663] falcon 15340000.vic: Adding to iommu group 17 [ 5.820374] falcon 15340000.vic: initialized [ 5.821417] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.827512] falcon 15380000.nvjpg: initialized [ 5.828143] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.837376] falcon 154c0000.nvenc: initialized [ 5.837908] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.847382] falcon 15a80000.nvenc1: initialized [ 5.847997] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.859256] nvdec 15480000.nvdec: initialized [ 5.859875] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.871192] nvdec 15140000.nvdec1: initialized [ 5.871737] tsec 15500000.tsec: Adding to iommu group 18 [ 5.877873] tsec 15500000.tsec: initialized [ 5.878477] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.885159] tsec 15100000.tsecb: initialized [ 5.889863] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.918645] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.931541] gpio-374 (wifi-enable): hogged as output/high [ 5.931838] gpio-431 (camera-control-output-low): hogged as output/low [ 5.932170] gpio-432 (camera-control-output-low): hogged as output/low [ 5.934066] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.936308] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.936962] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.938396] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.941182] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.947035] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.952726] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.961093] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.968215] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.980699] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.985106] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.990966] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.999843] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.009053] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.016801] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.023975] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.029869] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.039744] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.046016] pva 16000000.pva0: Adding to iommu group 22 [ 6.074574] pva 16000000.pva0: initialized [ 6.079784] pva 16800000.pva1: Adding to iommu group 23 [ 6.091370] pva 16800000.pva1: initialized [ 6.095810] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.109178] nvdla 15880000.nvdla0: initialized [ 6.110492] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.127465] nvdla 158c0000.nvdla1: initialized [ 6.130463] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.130983] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.131354] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.131433] tegradccommon 15200000.display-hub: dma mapping done [ 6.131695] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.132090] tegradc 15200000.display: Adding to iommu group 26 [ 6.132857] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.134020] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.135466] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.141301] tegra_cec 3960000.tegra_cec: probed [ 6.141848] tegradc 15210000.display: Adding to iommu group 26 [ 6.142130] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.142262] generic_infoframe_type: 0x87 [ 6.142359] tegradc 15200000.display: DT parsed successfully [ 6.142491] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.146385] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.147041] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.147055] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.147061] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.148054] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.148069] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.149409] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.153355] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.164524] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.169287] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.176503] kfuse 3830000.kfuse: initialized [ 6.184645] tegradc 15210000.display: disp0 connected to head1->sor [ 6.190640] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.198693] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.206302] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.207147] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.212073] tegradc 15210000.display: DT parsed successfully [ 6.219035] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.228825] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.237725] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.315993] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.325054] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.330443] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.350854] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.351335] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.353672] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.361919] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.370389] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.376930] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.384828] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.392044] usb usb1: Product: xHCI Host Controller [ 6.396753] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.402998] usb usb1: SerialNumber: 3610000.xhci [ 6.408828] hub 1-0:1.0: USB hub found [ 6.411627] hub 1-0:1.0: 4 ports detected [ 6.416215] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.421041] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.428839] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.436686] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.444431] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.451674] usb usb2: Product: xHCI Host Controller [ 6.456367] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.462848] usb usb2: SerialNumber: 3610000.xhci [ 6.468308] hub 2-0:1.0: USB hub found [ 6.471396] hub 2-0:1.0: 4 ports detected [ 6.516623] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.523689] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.525120] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.525334] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.539136] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.540236] tegra194-cpufreq ccplex: probed with BWMGR [ 6.541405] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.541978] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.542426] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.543587] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.548940] tegra194-vi5 15c10000.vi: initialized [ 6.550119] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.551264] generic_infoframe_type: 0x87 [ 6.555475] tegradc 15200000.display: DT parsed successfully [ 6.560028] mmc0: CQHCI version 5.10 [ 6.560647] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.560906] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.560913] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.560945] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.560950] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.560955] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.561132] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.570836] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.580316] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.585512] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.592150] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.592158] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.593922] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.598463] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.605456] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.614524] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.619638] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.634611] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.642646] nvethernet 2490000.ethernet: Macsec not supported [ 6.651724] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.659591] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.665331] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.672710] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.680266] mmc0: Command Queue Engine enabled [ 6.681436] tegradc 15200000.display: probed [ 6.685608] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.696244] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.696279] mmc0: periodic cache flush enabled [ 6.701975] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.709587] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.719116] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.726135] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.732774] tegra-se-nvhost 15810000.se: initialized [ 6.735490] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.744487] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.757353] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.758578] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.814994] Console: switching to colour frame buffer device 240x67 [ 6.820833] tegradc 15200000.display: fb registered [ 6.826147] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.831854] tegra-se-nvhost 15820000.se: initialized [ 6.832555] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.838207] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.842845] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.849081] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.861557] tegra-se-nvhost 15830000.se: initialized [ 6.866791] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.872511] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.879043] tegra-se-nvhost 15840000.se: initialized [ 6.884946] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.885230] random: crng init done [ 6.891125] tegra_actmon d230000.actmon: in actmon_register()... [ 6.899198] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.901992] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.904703] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.912672] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.919993] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.921041] hvc_sysfs: hypervisor is not present [ 6.921180] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.921189] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.921830] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.921834] Extcon AUX1(HDMI) enable [ 6.927804] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.927811] usb 1-2: Manufacturer: Generic [ 6.927931] tegradc 15210000.display: disp1 connected to head1->sor [ 6.928080] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.928151] tegradc 15210000.display: DT parsed successfully [ 6.928190] tegradc 15210000.display: Display dc.00000000202adced registered with id=1 [ 6.928308] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.928314] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.935020] tegradc 15210000.display: probed [ 6.964798] ALSA device list: [ 6.969466] hub 1-2:1.0: USB hub found [ 6.972633] No soundcards found. [ 6.977833] hub 1-2:1.0: 4 ports detected [ 7.031653] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.042291] tegradc 15210000.display: fb registered [ 7.045694] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.054509] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.054519] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.068242] tegradc 15200000.display: blank - powerdown [ 7.068973] Freeing unused kernel memory: 3968K [ 7.070874] Run /init as init process [ 7.084607] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.084612] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.084616] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.084619] usb 2-3: Manufacturer: Generic [ 7.095136] hub 2-3:1.0: USB hub found [ 7.097020] hub 2-3:1.0: 4 ports detected [ 7.103710] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.103715] Extcon AUX1(HDMI) disable [ 7.127195] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.128055] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.139728] tegradc 15200000.display: unblank [ 7.140789] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.140980] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.142780] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.142784] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.147480] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.149299] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.153319] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.153323] Extcon AUX1(HDMI) enable [ 7.166067] tegradc 15200000.display: sync windows ret = 247 [ 7.202789] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.213021] tegradc 15210000.display: blank - powerdown [ 7.218403] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.218407] Extcon DP: HPD disabled [ 7.218410] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.218423] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.218428] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.250050] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.257172] Extcon HDMI: HPD enabled [ 7.260814] tegradc 15200000.display: hdmi: plugged [ 7.301176] Root device found: mmcblk0p1 [ 7.304515] Found dev node: /dev/mmcblk0p1 [ 7.341281] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.346674] Rootfs mounted over mmcblk0p1 [ 7.360300] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.361747] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.363165] usb 1-3: Product: Bluetooth Radio [ 7.364570] usb 1-3: Manufacturer: Realtek [ 7.365868] usb 1-3: SerialNumber: 00e04c000001 [ 7.394932] Switching from initrd to actual rootfs [ 7.539105] systemd[1]: System time before build time, advancing clock. [ 7.612367] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.617263] systemd[1]: Detected architecture arm64. [ 7.681112] systemd[1]: Set hostname to . [ 7.847884] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.203507] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.205205] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.210912] systemd[1]: Created slice system-modprobe.slice. [ 8.215683] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.219887] systemd[1]: Created slice User and Session Slice. [ 8.223274] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.227434] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.230771] systemd[1]: Reached target User and Group Name Lookups. [ 8.233924] systemd[1]: Reached target Slices. [ 8.237155] systemd[1]: Reached target Swap. [ 8.241105] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.244756] systemd[1]: Listening on Syslog Socket. [ 8.248360] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.251846] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.256110] systemd[1]: Listening on Journal Audit Socket. [ 8.259840] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.263711] systemd[1]: Listening on Journal Socket. [ 8.267515] systemd[1]: Listening on udev Control Socket. [ 8.271122] systemd[1]: Listening on udev Kernel Socket. [ 8.280947] systemd[1]: Mounting Huge Pages File System... [ 8.290832] systemd[1]: Mounting POSIX Message Queue File System... [ 8.298897] systemd[1]: Mounting RPC Pipe File System... [ 8.307770] systemd[1]: Mounting Kernel Debug File System... [ 8.316463] systemd[1]: Mounting Kernel Trace File System... [ 8.326707] systemd[1]: Starting Journal Service... [ 8.335859] systemd[1]: Starting Set the console keyboard layout... [ 8.344275] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.348079] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.354778] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.362989] systemd[1]: Started Nameserver information manager. [ 8.367744] systemd[1]: Reached target Network (Pre). [ 8.375042] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.376969] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.383572] systemd[1]: Starting Load Kernel Modules... [ 8.391764] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.400792] systemd[1]: Starting udev Coldplug all Devices... [ 8.411355] systemd[1]: Mounted Huge Pages File System. [ 8.415155] systemd[1]: Mounted POSIX Message Queue File System. [ 8.419203] systemd[1]: Mounted RPC Pipe File System. [ 8.419999] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.425815] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.426635] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.429612] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.429625] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.429630] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.431344] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.432960] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.433125] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.433137] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.444425] systemd[1]: Mounted Kernel Debug File System. [ 8.448415] systemd[1]: Mounted Kernel Trace File System. [ 8.454712] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.459513] systemd[1]: nvfb-udev.service: Succeeded. [ 8.463746] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.474167] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.487517] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.489277] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.496510] systemd[1]: Starting Load/Save Random Seed... [ 8.504412] systemd[1]: Starting Create System Users... [ 8.526265] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.526265] [ 8.553890] systemd[1]: Finished Create System Users. [ 8.562080] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.570785] systemd[1]: Finished Load Kernel Modules. [ 8.577823] systemd[1]: Finished Load/Save Random Seed. [ 8.582263] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.589168] systemd[1]: Mounting Kernel Configuration File System... [ 8.598378] systemd[1]: Started OP-TEE Client Supplicant. [ 8.608565] systemd[1]: Starting Apply Kernel Variables... [ 8.618709] systemd[1]: Finished Set the console keyboard layout. [ 8.623218] systemd[1]: Mounted Kernel Configuration File System. [ 8.629992] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.634089] systemd[1]: Reached target Local File Systems (Pre). [ 8.637354] systemd[1]: Reached target Local File Systems. [ 10.105457] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.118848] imx219 9-0010: board setup failed [ 10.120254] imx219: probe of 9-0010 failed with error -121 [ 10.145346] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.154193] imx219 10-0010: board setup failed [ 10.155639] imx219: probe of 10-0010 failed with error -121 [ 10.186493] hot-surface-alert cooling state: 0 -> 1 [ 11.176843] using random self ethernet address [ 11.183200] using random host ethernet address [ 11.846376] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.848209] Creating 1 MTD partitions on "spi6.0": [ 11.849900] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.386557] using random self ethernet address [ 12.388271] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.822532] nvidia: loading out-of-tree module taints kernel. [ 59.724587] watchdog: watchdog0: watchdog did not stop! [ 60.211962] Trying to unregister non-registered hwtime source [ 63.270033] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.271823] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout,àÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 66000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.609] I> regulator 'vdd-hdmi-5v0' already enabled [0003.609] I> hdmi cable connected [0003.616] W> set volts not configured for 'vdd-1v0' [0003.622] W> set volts not configured for 'vdd-1v8-hs' [0003.622] I> retrieved tmds range from prod_list_hdmi_soc [0003.629] E> invalid display type [0003.631] E> cannot find any other nvdisp nodes [0003.648] I> edid read success [0003.660] I> edid read success [0003.660] I> width = 640, height = 480, frequency = 25174825 [0003.661] I> width = 1920, height = 1080, frequency = 148500000 [0003.661] I> width = 1280, height = 768, frequency = 79500000 [0003.662] I> width = 1360, height = 768, frequency = 85500000 [0003.662] I> width = 720, height = 480, frequency = 26973026 [0003.666] I> width = 720, height = 576, frequency = 26973026 [0003.671] I> width = 1280, height = 720, frequency = 74175824 [0003.677] I> width = 1280, height = 720, frequency = 74175824 [0003.683] I> width = 1920, height = 1080, frequency = 148351648 [0003.688] I> width = 1920, height = 1080, frequency = 148351648 [0003.694] I> width = 720, height = 480, frequency = 26973026 [0003.700] I> width = 720, height = 576, frequency = 26973026 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 3840, height = 2160, frequency = 296703296 [0003.723] I> width = 3840, height = 2160, frequency = 296703296 [0003.728] I> width = 4096, height = 2160, frequency = 296703296 [0003.734] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.745] I> hdmi_enable, starting HDMI initialisation [0003.750] I> hdmi_enable, HDMI initialisation complete [0003.759] initializing target [0003.760] calling apps_init() [0003.761] starting app kernel_boot_app [0003.762] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000673] Console: colour dummy device 80x25 [ 0.002077] printk: console [tty0] enabled [ 0.002142] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002180] pid_max: default: 32768 minimum: 301 [ 0.002338] LSM: Security Framework initializing [ 0.002394] Yama: becoming mindful. [ 0.002464] SELinux: Initializing. [ 0.002681] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002723] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005996] rcu: Hierarchical SRCU implementation. [ 0.006237] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007099] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007194] DTB Build time: Aug 10 2022 20:31:49 [ 0.010006] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010423] Remapping and enabling EFI services. [ 0.012829] smp: Bringing up secondary CPUs ... [ 0.046753] Detected PIPT I-cache on CPU1 [ 0.046857] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.076287] Detected PIPT I-cache on CPU2 [ 0.076405] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105971] Detected PIPT I-cache on CPU3 [ 0.106055] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135705] Detected PIPT I-cache on CPU4 [ 0.135877] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165663] Detected PIPT I-cache on CPU5 [ 0.165796] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166128] smp: Brought up 1 node, 6 CPUs [ 0.166421] SMP: Total of 6 processors activated. [ 0.166444] CPU features: detected: Privileged Access Never [ 0.166466] CPU features: detected: LSE atomic instructions [ 0.166487] CPU features: detected: User Access Override [ 0.166508] CPU features: detected: 32-bit EL0 Support [ 0.166529] CPU features: detected: RAS Extension Support [ 0.166550] CPU features: detected: CRC32 instructions [ 0.166571] CPU features: detected: 32-bit EL1 Support [ 0.236028] CPU: All CPU(s) started at EL2 [ 0.240969] devtmpfs: initialized [ 0.298982] Registered cp15_barrier emulation handler [ 0.299130] Registered setend emulation handler [ 0.299158] KASLR enabled [ 0.299480] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.299522] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.300931] pinctrl core: initialized pinctrl subsystem [ 0.301995] SMBIOS 3.0.0 present. [ 0.302042] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.302701] NET: Registered protocol family 16 [ 0.305007] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.305511] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.306475] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.306565] audit: initializing netlink subsys (disabled) [ 0.306837] audit: type=2000 audit(0.304:1): state=initialized audit_enabled=0 res=1 [ 0.307294] thermal_sys: Registered thermal governor 'step_wise' [ 0.307301] thermal_sys: Registered thermal governor 'power_allocator' [ 0.307327] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.309752] cpuidle: using governor menu [ 0.310599] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.311123] ASID allocator initialised with 32768 entries [ 0.311387] Serial: AMBA PL011 UART driver [ 0.314568] Tegra reboot handler registered. [ 0.392992] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.393128] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.393309] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.393365] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.393518] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.393572] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.393694] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.393744] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.393908] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.393974] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.396250] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.396291] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.396328] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.396362] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.396417] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.396452] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.396485] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.396519] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.396557] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.396593] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.396627] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.396660] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.396694] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.396731] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.396765] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.396799] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.396833] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.396927] mc-err: mcerr ops are set to t19x [ 0.410753] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.410789] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.410815] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.410839] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.418291] ACPI: Interpreter disabled. [ 0.419596] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.420855] iommu: Default domain type: Translated [ 0.420925] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.421291] SCSI subsystem initialized [ 0.421474] usbcore: registered new interface driver usbfs [ 0.421530] usbcore: registered new interface driver hub [ 0.421575] usbcore: registered new device driver usb [ 0.422026] mc: Linux media interface: v0.10 [ 0.422071] videodev: Linux video capture interface: v2.00 [ 0.422414] pps_core: LinuxPPS API ver. 1 registered [ 0.422438] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.422488] PTP clock support registered [ 0.422711] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.423037] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.423133] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.423856] Registered efivars operations [ 0.430364] FPGA manager framework [ 0.430481] Advanced Linux Sound Architecture Driver Initialized. [ 0.431069] Bluetooth: Core ver 2.22 [ 0.431114] NET: Registered protocol family 31 [ 0.431132] Bluetooth: HCI device and connection manager initialized [ 0.431158] Bluetooth: HCI socket layer initialized [ 0.431182] Bluetooth: L2CAP socket layer initialized [ 0.431222] Bluetooth: SCO socket layer initialized [ 0.432824] camchar: rtcpu character device driver loaded [ 0.434100] clocksource: Switched to clocksource arch_sys_counter [ 0.734239] VFS: Disk quotas dquot_6.6.0 [ 0.734332] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.734707] pnp: PnP ACPI: disabled [ 0.746703] la/ptsa driver initialized. [ 0.746823] NET: Registered protocol family 2 [ 0.747007] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.752036] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.752148] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.752451] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.752912] TCP: Hash tables configured (established 65536 bind 65536) [ 0.753146] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.753263] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.753460] NET: Registered protocol family 1 [ 0.754014] RPC: Registered named UNIX socket transport module. [ 0.754038] RPC: Registered udp transport module. [ 0.754055] RPC: Registered tcp transport module. [ 0.754073] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.754125] PCI: CLS 0 bytes, default 64 [ 0.754323] Trying to unpack rootfs image as initramfs... [ 0.943675] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.945741] Freeing initrd memory: 8196K [ 0.950846] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.950913] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.950993] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.951436] kvm [1]: IPA Size Limit: 40 bits [ 0.951977] kvm [1]: vgic interrupt IRQ9 [ 0.952535] kvm [1]: VHE mode initialized successfully [ 0.954374] Initialise system trusted keyrings [ 0.954687] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.961429] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.962400] NFS: Registering the id_resolver key type [ 0.962438] Key type id_resolver registered [ 0.962453] Key type id_legacy registered [ 0.962540] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.962564] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.962613] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.972915] NET: Registered protocol family 38 [ 0.972945] Key type asymmetric registered [ 0.972965] Asymmetric key parser 'x509' registered [ 0.973020] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.973245] io scheduler mq-deadline registered [ 0.973263] io scheduler kyber registered [ 0.980161] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.983446] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.983534] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.983608] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.983680] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.983748] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.990370] scrncapt: init (heads:4 wins:6 planes:4) [ 0.990503] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.991730] EINJ: ACPI disabled. [ 0.995207] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.995232] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.995247] tegra-pmc: ### PMC reset level: L1 [ 0.995261] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.995308] tegra-pmc: PMC Prod config success [ 1.000548] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.016184] random: fast init done [ 1.017822] printk: console [ttyTCU0] enabled [ 2.557725] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.562592] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.567194] arm-smmu 10000000.iommu: stage 1 translation [ 2.572823] arm-smmu 10000000.iommu: stage 2 translation [ 2.578081] arm-smmu 10000000.iommu: nested translation [ 2.583685] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.590851] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.602163] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.603695] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.610537] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.617924] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.623574] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.628307] arm-smmu 12000000.iommu: stage 1 translation [ 2.633551] arm-smmu 12000000.iommu: stage 2 translation [ 2.639239] arm-smmu 12000000.iommu: nested translation [ 2.644413] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.651583] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.662851] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.664681] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.671268] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.678937] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.688582] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.691981] tegra_profiler: auth: init [ 2.696165] THERMAL EST: found 3 subdevs [ 2.699361] THERMAL EST num_resources: 0 [ 2.703500] [THERMAL EST subdev 0] [ 2.706528] [THERMAL EST subdev 1] [ 2.710206] [THERMAL EST subdev 2] [ 2.713165] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.719669] THERMAL EST: thz register success. [ 2.723893] THERMAL EST: end of probe, return err: 0 [ 2.729496] nvsciipc: loaded module [ 2.736403] tun: Universal TUN/TAP device driver, 1.6 [ 2.738839] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.745198] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.750511] e1000e: Intel(R) PRO/1000 Network Driver [ 2.755694] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.761517] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.766825] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.772996] PPP generic driver version 2.4.2 [ 2.777288] PPP BSD Compression module registered [ 2.782051] PPP Deflate Compression module registered [ 2.787301] PPP MPPE Compression module registered [ 2.792073] usbcore: registered new interface driver r8152 [ 2.797816] usbcore: registered new interface driver asix [ 2.802893] usbcore: registered new interface driver ax88179_178a [ 2.809022] usbcore: registered new interface driver cdc_ether [ 2.815229] usbcore: registered new interface driver net1080 [ 2.820824] usbcore: registered new interface driver cdc_subset [ 2.826873] usbcore: registered new interface driver zaurus [ 2.832563] usbcore: registered new interface driver cdc_ncm [ 2.838237] usbcore: registered new interface driver aqc111 [ 2.843904] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.849700] ohci-pci: OHCI PCI platform driver [ 2.854253] ohci-platform: OHCI generic platform driver [ 2.860322] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.866679] usbcore: registered new interface driver uas [ 2.870304] usbcore: registered new interface driver usb-storage [ 2.876487] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.882728] mousedev: PS/2 mouse device common for all mice [ 2.887722] usbcore: registered new interface driver xpad [ 2.895574] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.898490] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.905995] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.912842] i2c /dev entries driver [ 2.916135] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.921661] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.927298] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.932633] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.937934] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.943486] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.948669] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.962714] device-mapper: uevent: version 1.0.3 [ 2.963162] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.969292] cpuidle: Initializing cpuidle driver [ 2.973412] sdhci: Secure Digital Host Controller Interface driver [ 2.978062] sdhci: Copyright(c) Pierre Ossman [ 2.982150] Synopsys Designware Multimedia Card Interface Driver [ 2.988096] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.994076] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.994945] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.007778] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.029271] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.039092] vdd-1v0: supplied by regulator-dummy [ 3.044667] vdd-1v8-hs: supplied by regulator-dummy [ 3.049600] vdd-1v8-ls: supplied by regulator-dummy [ 3.054399] vdd-1v8-ao: supplied by regulator-dummy [ 3.058443] vddio-ddr-1v1: supplied by regulator-dummy [ 3.062867] vdd-rtc: supplied by regulator-dummy [ 3.064716] spmic-ldo1: supplied by regulator-dummy [ 3.065940] vdd-ao-3v3: supplied by regulator-dummy [ 3.072156] vddio-emmc-3v3: supplied by regulator-dummy [ 3.078548] spmic-ldo4: supplied by regulator-dummy [ 3.079792] vdd-usb-3v3: supplied by regulator-dummy [ 3.086013] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.092201] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.097915] spmic-ldo8: supplied by vdd-1v8-ls [ 3.099480] gpio-510 (gpio_default): hogged as output/high [ 3.100869] gpio-511 (gpio_default): hogged as output/high [ 3.103930] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.240186] max77686-rtc max77620-rtc: registered as rtc0 [ 3.241540] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.241888] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.081684] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.082908] hid: raw HID events driver (C) Jiri Kosina [ 4.083769] usbcore: registered new interface driver usbhid [ 4.083950] usbhid: USB HID core driver [ 4.086550] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.087983] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.130794] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.204182] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.196 ms) ÿá[ 4.171919] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.172507] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.173718] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.174635] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.176458] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.177321] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.177978] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.179519] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.179874] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.182718] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.188398] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.195102] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.200242] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.205931] denver_knobs_init:MTS_VERSION:55637613 [ 4.219642] t19x_cache tegra-cache: probed [ 4.221966] optee: probing for conduit method. [ 4.222887] optee: revision 3.16 (65cc2218) [ 4.223883] optee: dynamic shared memory is enabled [ 4.226470] optee: initialized driver [ 4.233078] nvpmodel: initialized successfully [ 4.234360] tegra_hv: get_hvd: not initialized yet [ 4.238958] user_ivc_mempool: hypervisor not present [ 4.244692] usbcore: registered new interface driver snd-usb-audio [ 4.251384] u32 classifier [ 4.252755] input device check on [ 4.256183] Actions configured [ 4.260032] Initializing XFRM netlink socket [ 4.264683] NET: Registered protocol family 10 [ 4.270921] Segment Routing with IPv6 [ 4.272145] NET: Registered protocol family 17 [ 4.276402] NET: Registered protocol family 15 [ 4.281015] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.295273] Bluetooth: RFCOMM socket layer initialized [ 4.299115] Bluetooth: RFCOMM ver 1.11 [ 4.303194] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.308763] Bluetooth: HIDP socket layer initialized [ 4.314839] 9pnet: Installing 9P2000 support [ 4.318505] Key type dns_resolver registered [ 4.323676] registered taskstats version 1 [ 4.326927] Loading compiled-in X.509 certificates [ 4.339197] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.343021] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.352753] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.354657] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.363458] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.371597] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.486500] tegra194-pcie 14160000.pcie: Link up [ 4.489416] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.489708] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.489868] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.490188] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.490397] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.490795] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.491228] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.501500] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.502257] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.502790] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.504267] pci 0004:01:00.0: supports D1 D2 [ 4.504471] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.513446] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.513864] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.514322] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.514830] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.515113] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.515375] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.521187] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.528558] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.537364] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.547425] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.551988] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.557410] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.564608] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.573796] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.575245] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.583406] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.592189] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.707150] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.707890] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.708106] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.708305] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.708579] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.708813] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.709251] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.709677] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.726852] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.727350] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.729495] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.731305] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.733024] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.734712] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.735577] pci 0005:00:00.0: Removing from iommu group 7 [ 5.735864] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.765784] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.786614] host1x 13e10000.host1x: initialized [ 5.788082] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.788910] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.790032] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.790837] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.791846] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.792432] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.793403] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.794008] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.800152] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.807519] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.817734] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.824364] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.834622] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.841707] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.851296] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.858234] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.868158] falcon 15340000.vic: Adding to iommu group 17 [ 5.881929] falcon 15340000.vic: initialized [ 5.882968] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.888116] falcon 15380000.nvjpg: initialized [ 5.888788] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.901558] falcon 154c0000.nvenc: initialized [ 5.902311] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.910993] falcon 15a80000.nvenc1: initialized [ 5.911645] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.922939] nvdec 15480000.nvdec: initialized [ 5.923481] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.932724] nvdec 15140000.nvdec1: initialized [ 5.933352] tsec 15500000.tsec: Adding to iommu group 18 [ 5.939241] tsec 15500000.tsec: initialized [ 5.939874] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.948427] tsec 15100000.tsecb: initialized [ 5.952345] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.976817] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.988665] gpio-374 (wifi-enable): hogged as output/high [ 5.988995] gpio-431 (camera-control-output-low): hogged as output/low [ 5.989296] gpio-432 (camera-control-output-low): hogged as output/low [ 5.991067] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.992551] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.993062] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.999453] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.004758] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.010314] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.015743] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.024167] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.031887] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.043099] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.048624] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.054491] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.063394] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.072370] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.079889] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.087426] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.093568] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.103122] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.109665] pva 16000000.pva0: Adding to iommu group 22 [ 6.136083] pva 16000000.pva0: initialized [ 6.141386] pva 16800000.pva1: Adding to iommu group 23 [ 6.160494] pva 16800000.pva1: initialized [ 6.164876] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.177066] nvdla 15880000.nvdla0: initialized [ 6.178332] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.194025] nvdla 158c0000.nvdla1: initialized [ 6.196725] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.196994] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.197350] tegradccommon 15200000.display-hub: dma mapping done [ 6.197522] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.197998] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.198527] tegradc 15200000.display: Adding to iommu group 26 [ 6.199048] tegradc 15210000.display: Adding to iommu group 26 [ 6.199889] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.200409] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.204770] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.207631] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.210202] tegra_cec 3960000.tegra_cec: probed [ 6.210810] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.217322] generic_infoframe_type: 0x87 [ 6.223882] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.227600] tegradc 15200000.display: DT parsed successfully [ 6.231463] kfuse 3830000.kfuse: initialized [ 6.237952] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.244106] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.262612] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.269590] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.269690] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.277382] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.277422] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.283763] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.308796] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.310420] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.314332] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.326702] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.327367] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.347405] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.347850] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.352605] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.368205] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.377240] tegradc 15210000.display: disp0 connected to head1->sor [ 6.380912] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.381313] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.390973] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.391078] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.398293] tegradc 15210000.display: DT parsed successfully [ 6.404372] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.411141] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.434204] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.440714] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.447848] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.455234] usb usb1: Product: xHCI Host Controller [ 6.460243] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.466560] usb usb1: SerialNumber: 3610000.xhci [ 6.472374] hub 1-0:1.0: USB hub found [ 6.475276] hub 1-0:1.0: 4 ports detected [ 6.480073] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.484807] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.492302] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.500012] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.507874] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.514842] usb usb2: Product: xHCI Host Controller [ 6.520123] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.526293] usb usb2: SerialNumber: 3610000.xhci [ 6.531741] hub 2-0:1.0: USB hub found [ 6.534798] hub 2-0:1.0: 4 ports detected [ 6.576958] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.582409] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.583692] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.583881] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.598142] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.599161] tegra194-cpufreq ccplex: probed with BWMGR [ 6.600289] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.601049] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.601500] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.602774] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.609165] tegra194-vi5 15c10000.vi: initialized [ 6.610476] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.611771] mmc0: CQHCI version 5.10 [ 6.612178] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.612420] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.612426] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.612432] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.612437] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.612441] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.614959] generic_infoframe_type: 0x87 [ 6.618160] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.618166] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.618171] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.619588] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.624873] tegradc 15200000.display: DT parsed successfully [ 6.639139] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.647912] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.653290] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.658791] nvethernet 2490000.ethernet: Macsec not supported [ 6.662974] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.670363] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.675910] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.676277] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.684199] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.690359] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.696070] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.704349] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.711886] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.721389] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.729556] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.734312] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.743820] tegra-se-nvhost 15810000.se: initialized [ 6.746409] mmc0: Command Queue Engine enabled [ 6.746414] mmc0: periodic cache flush enabled [ 6.746426] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.746911] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.747051] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.749885] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.750898] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.753785] tegradc 15200000.display: probed [ 6.762368] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.872614] Console: switching to colour frame buffer device 240x67 [ 6.872862] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.878111] tegradc 15200000.display: fb registered [ 6.889586] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.895579] tegra-se-nvhost 15820000.se: initialized [ 6.896253] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.901778] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.905955] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.912759] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.925229] tegra-se-nvhost 15830000.se: initialized [ 6.930587] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.935848] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.941852] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.942230] tegra-se-nvhost 15840000.se: initialized [ 6.950150] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.959664] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.962259] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.970157] tegra_actmon d230000.actmon: in actmon_register()... [ 6.971698] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.972795] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.972804] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.973269] usb 1-2: Manufacturer: Generic [ 6.973391] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.973396] Extcon AUX1(HDMI) enable [ 6.979170] tegradc 15210000.display: disp1 connected to head1->sor [ 6.979390] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.988259] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.990180] hub 1-2:1.0: USB hub found [ 6.991324] hub 1-2:1.0: 4 ports detected [ 6.995868] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.004204] hvc_sysfs: hypervisor is not present [ 7.007706] tegradc 15210000.display: DT parsed successfully [ 7.042635] ALSA device list: [ 7.045777] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.053047] No soundcards found. [ 7.063691] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.066787] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.091915] random: crng init done [ 7.095134] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.108357] tegradc 15210000.display: probed [ 7.108735] tegradc 15210000.display: fb registered [ 7.113946] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.115749] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.117968] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.119756] Freeing unused kernel memory: 3968K [ 7.126289] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.133637] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.138613] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.138622] usb 2-3: Manufacturer: Generic ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.160006] tegradc 15200000.display: blank - powerdown [ 7.166258] Run /init as init process [ 7.170862] hub 2-3:1.0: USB hub found [ 7.172691] hub 2-3:1.0: 4 ports detected [ 7.205435] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.205439] Extcon AUX1(HDMI) disable [ 7.228819] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.229660] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.234138] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.234143] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.234161] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.243144] tegradc 15200000.display: unblank [ 7.244162] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.244343] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.250104] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.251970] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.255929] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.255932] Extcon AUX1(HDMI) enable [ 7.268729] tegradc 15200000.display: sync windows ret = 247 [ 7.302941] tegradc 15210000.display: blank - powerdown [ 7.304366] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.304369] Extcon DP: HPD disabled [ 7.304379] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.304391] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.304395] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.324211] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.331504] Extcon HDMI: HPD enabled [ 7.335126] tegradc 15200000.display: hdmi: plugged [ 7.374914] Root device found: mmcblk0p1 [ 7.378336] Found dev node: /dev/mmcblk0p1 [ 7.391364] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.392800] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.394173] usb 1-3: Product: Bluetooth Radio [ 7.395429] usb 1-3: Manufacturer: Realtek [ 7.396689] usb 1-3: SerialNumber: 00e04c000001 [ 7.414807] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.420057] Rootfs mounted over mmcblk0p1 [ 7.457693] Switching from initrd to actual rootfs [ 7.601167] systemd[1]: System time before build time, advancing clock. [ 7.674280] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.679234] systemd[1]: Detected architecture arm64. [ 7.726143] systemd[1]: Set hostname to . [ 7.901536] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.254079] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.255854] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.261855] systemd[1]: Created slice system-modprobe.slice. [ 8.266596] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.270810] systemd[1]: Created slice User and Session Slice. [ 8.274196] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.278471] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.281661] systemd[1]: Reached target User and Group Name Lookups. [ 8.284787] systemd[1]: Reached target Slices. [ 8.287736] systemd[1]: Reached target Swap. [ 8.291659] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.295226] systemd[1]: Listening on Syslog Socket. [ 8.298664] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.301934] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.306168] systemd[1]: Listening on Journal Audit Socket. [ 8.309639] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.313655] systemd[1]: Listening on Journal Socket. [ 8.318917] systemd[1]: Listening on udev Control Socket. [ 8.322379] systemd[1]: Listening on udev Kernel Socket. [ 8.330546] systemd[1]: Mounting Huge Pages File System... [ 8.338699] systemd[1]: Mounting POSIX Message Queue File System... [ 8.346283] systemd[1]: Mounting RPC Pipe File System... [ 8.354835] systemd[1]: Mounting Kernel Debug File System... [ 8.362889] systemd[1]: Mounting Kernel Trace File System... [ 8.372517] systemd[1]: Starting Journal Service... [ 8.380947] systemd[1]: Starting Set the console keyboard layout... [ 8.389056] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.392707] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.399165] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.407097] systemd[1]: Started Nameserver information manager. [ 8.412565] systemd[1]: Reached target Network (Pre). [ 8.421036] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.423936] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.432494] systemd[1]: Starting Load Kernel Modules... [ 8.440122] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.448809] systemd[1]: Starting udev Coldplug all Devices... [ 8.458613] systemd[1]: Mounted Huge Pages File System. [ 8.462359] systemd[1]: Mounted POSIX Message Queue File System. [ 8.466219] systemd[1]: Mounted RPC Pipe File System. [ 8.470305] systemd[1]: Mounted Kernel Debug File System. [ 8.470736] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.476409] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.477800] systemd[1]: Mounted Kernel Trace File System. [ 8.479602] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.481088] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.482757] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.482763] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.483132] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.483287] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.483298] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.483691] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.500087] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.508516] systemd[1]: nvfb-udev.service: Succeeded. [ 8.512417] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.525746] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.538216] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.540000] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.547051] systemd[1]: Starting Load/Save Random Seed... [ 8.554750] systemd[1]: Starting Create System Users... [ 8.578978] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.578978] [ 8.609846] systemd[1]: Finished Load/Save Random Seed. [ 8.621947] systemd[1]: Finished Load Kernel Modules. [ 8.628211] systemd[1]: Finished Create System Users. [ 8.632666] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.638905] systemd[1]: Mounting Kernel Configuration File System... [ 8.646484] systemd[1]: Started OP-TEE Client Supplicant. [ 8.654489] systemd[1]: Starting Apply Kernel Variables... [ 8.662810] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.673407] systemd[1]: Finished Set the console keyboard layout. [ 8.677594] systemd[1]: Mounted Kernel Configuration File System. [ 10.098761] hot-surface-alert cooling state: 0 -> 1 [ 10.113368] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.122217] imx219 9-0010: board setup failed [ 10.123622] imx219: probe of 9-0010 failed with error -121 [ 10.135848] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.141062] imx219 10-0010: board setup failed [ 10.142806] imx219: probe of 10-0010 failed with error -121 [ 10.875778] using random self ethernet address [ 10.877062] using random host ethernet address [ 11.544959] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.546310] Creating 1 MTD partitions on "spi6.0": [ 11.547445] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.317355] using random self ethernet address [ 12.317362] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.813008] nvidia: loading out-of-tree module taints kernel. [ 58.623784] watchdog: watchdog0: watchdog did not stop! [ 59.095927] Trying to unregister non-registered hwtime source [ 62.160872] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.162709] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.481] I> register 'maxim' power off handle [0003.484] I> virtual i2c enabled [0003.484] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.607] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.617] E> invalid display type [0003.618] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.646] I> edid read success [0003.647] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.686] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.732] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.746] calling apps_init() [0003.747] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000006] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000698] Console: colour dummy device 80x25 [ 0.002069] printk: console [tty0] enabled [ 0.002135] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002171] pid_max: default: 32768 minimum: 301 [ 0.002339] LSM: Security Framework initializing [ 0.002397] Yama: becoming mindful. [ 0.002443] SELinux: Initializing. [ 0.002597] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002636] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005536] rcu: Hierarchical SRCU implementation. [ 0.005772] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006609] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006659] DTB Build time: Aug 10 2022 20:31:49 [ 0.009533] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009767] Remapping and enabling EFI services. [ 0.011765] smp: Bringing up secondary CPUs ... [ 0.045430] Detected PIPT I-cache on CPU1 [ 0.045537] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075436] Detected PIPT I-cache on CPU2 [ 0.075581] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105207] Detected PIPT I-cache on CPU3 [ 0.105419] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135203] Detected PIPT I-cache on CPU4 [ 0.135346] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165032] Detected PIPT I-cache on CPU5 [ 0.165175] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165580] smp: Brought up 1 node, 6 CPUs [ 0.165735] SMP: Total of 6 processors activated. [ 0.165802] CPU features: detected: Privileged Access Never [ 0.165824] CPU features: detected: LSE atomic instructions [ 0.165837] CPU features: detected: User Access Override [ 0.165850] CPU features: detected: 32-bit EL0 Support [ 0.165863] CPU features: detected: RAS Extension Support [ 0.165875] CPU features: detected: CRC32 instructions [ 0.165888] CPU features: detected: 32-bit EL1 Support [ 0.235935] CPU: All CPU(s) started at EL2 [ 0.242439] devtmpfs: initialized [ 0.292563] Registered cp15_barrier emulation handler [ 0.292687] Registered setend emulation handler [ 0.292709] KASLR enabled [ 0.293005] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.293029] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.294360] pinctrl core: initialized pinctrl subsystem [ 0.295415] SMBIOS 3.0.0 present. [ 0.295457] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.296121] NET: Registered protocol family 16 [ 0.298348] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.298874] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.299618] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.299680] audit: initializing netlink subsys (disabled) [ 0.299941] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.300490] thermal_sys: Registered thermal governor 'step_wise' [ 0.300497] thermal_sys: Registered thermal governor 'power_allocator' [ 0.300515] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.304256] cpuidle: using governor menu [ 0.304740] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.305251] ASID allocator initialised with 32768 entries [ 0.305498] Serial: AMBA PL011 UART driver [ 0.309385] Tegra reboot handler registered. [ 0.383601] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.383775] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.383980] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.384028] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.384189] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.384233] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.384366] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.384409] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.384543] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.384586] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.386769] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.386809] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.386838] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.386865] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.386894] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.386921] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.386957] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.386991] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.387017] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.387041] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.387084] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.387109] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.387133] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.387157] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.387181] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.387205] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.387229] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.387323] mc-err: mcerr ops are set to t19x [ 0.400587] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.400624] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.400638] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.400649] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.407133] ACPI: Interpreter disabled. [ 0.408406] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.409739] iommu: Default domain type: Translated [ 0.409804] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.410177] SCSI subsystem initialized [ 0.410344] usbcore: registered new interface driver usbfs [ 0.410389] usbcore: registered new interface driver hub [ 0.410423] usbcore: registered new device driver usb [ 0.410844] mc: Linux media interface: v0.10 [ 0.410873] videodev: Linux video capture interface: v2.00 [ 0.411152] pps_core: LinuxPPS API ver. 1 registered [ 0.411163] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.411184] PTP clock support registered [ 0.411387] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.411735] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.411883] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.412478] Registered efivars operations [ 0.418414] FPGA manager framework [ 0.418524] Advanced Linux Sound Architecture Driver Initialized. [ 0.419235] Bluetooth: Core ver 2.22 [ 0.419275] NET: Registered protocol family 31 [ 0.419286] Bluetooth: HCI device and connection manager initialized [ 0.419302] Bluetooth: HCI socket layer initialized [ 0.419318] Bluetooth: L2CAP socket layer initialized [ 0.419346] Bluetooth: SCO socket layer initialized [ 0.421280] camchar: rtcpu character device driver loaded [ 0.422228] clocksource: Switched to clocksource arch_sys_counter [ 0.732901] VFS: Disk quotas dquot_6.6.0 [ 0.732970] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.733381] pnp: PnP ACPI: disabled [ 0.746450] la/ptsa driver initialized. [ 0.746574] NET: Registered protocol family 2 [ 0.746774] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.752928] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.753024] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.753316] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.753753] TCP: Hash tables configured (established 65536 bind 65536) [ 0.753884] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.753972] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.754194] NET: Registered protocol family 1 [ 0.754798] RPC: Registered named UNIX socket transport module. [ 0.754811] RPC: Registered udp transport module. [ 0.754820] RPC: Registered tcp transport module. [ 0.754849] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.754874] PCI: CLS 0 bytes, default 64 [ 0.755053] Trying to unpack rootfs image as initramfs... [ 0.943599] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.945776] Freeing initrd memory: 8196K [ 0.949894] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.949939] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.949995] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.950444] kvm [1]: IPA Size Limit: 40 bits [ 0.951068] kvm [1]: vgic interrupt IRQ9 [ 0.951639] kvm [1]: VHE mode initialized successfully [ 0.953073] Initialise system trusted keyrings [ 0.953362] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.958513] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.959242] NFS: Registering the id_resolver key type [ 0.959269] Key type id_resolver registered [ 0.959279] Key type id_legacy registered [ 0.959371] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.959389] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.959415] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.967096] NET: Registered protocol family 38 [ 0.967115] Key type asymmetric registered [ 0.967126] Asymmetric key parser 'x509' registered [ 0.967166] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.967354] io scheduler mq-deadline registered [ 0.967368] io scheduler kyber registered [ 0.971783] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.973946] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.974008] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.974058] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.974107] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.974154] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.977945] scrncapt: init (heads:4 wins:6 planes:4) [ 0.978373] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.978894] EINJ: ACPI disabled. [ 0.981028] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.981048] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.981058] tegra-pmc: ### PMC reset level: L1 [ 0.981067] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.981100] tegra-pmc: PMC Prod config success [ 0.985509] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.989510] random: fast init done [ 0.989738] printk: console [ttyTCU0] enabled [ 2.542468] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.546936] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.551547] arm-smmu 10000000.iommu: stage 1 translation [ 2.556741] arm-smmu 10000000.iommu: stage 2 translation [ 2.562525] arm-smmu 10000000.iommu: nested translation [ 2.567612] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.574785] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.586052] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.588142] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.594440] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.602430] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.607481] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.612243] arm-smmu 12000000.iommu: stage 1 translation [ 2.617974] arm-smmu 12000000.iommu: stage 2 translation [ 2.623171] arm-smmu 12000000.iommu: nested translation [ 2.628849] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.636005] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.647331] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.648845] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.655695] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.662866] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.672803] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.676131] tegra_profiler: auth: init [ 2.680333] THERMAL EST: found 3 subdevs [ 2.683523] THERMAL EST num_resources: 0 [ 2.687623] [THERMAL EST subdev 0] [ 2.690691] [THERMAL EST subdev 1] [ 2.694369] [THERMAL EST subdev 2] [ 2.697328] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.703796] THERMAL EST: thz register success. [ 2.708091] THERMAL EST: end of probe, return err: 0 [ 2.713576] nvsciipc: loaded module [ 2.720783] tun: Universal TUN/TAP device driver, 1.6 [ 2.723153] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.729362] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.734678] e1000e: Intel(R) PRO/1000 Network Driver [ 2.739857] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.745686] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.751235] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.757432] PPP generic driver version 2.4.2 [ 2.761647] PPP BSD Compression module registered [ 2.766213] PPP Deflate Compression module registered [ 2.771461] PPP MPPE Compression module registered [ 2.776214] usbcore: registered new interface driver r8152 [ 2.781978] usbcore: registered new interface driver asix [ 2.787088] usbcore: registered new interface driver ax88179_178a [ 2.793251] usbcore: registered new interface driver cdc_ether [ 2.799405] usbcore: registered new interface driver net1080 [ 2.804992] usbcore: registered new interface driver cdc_subset [ 2.810810] usbcore: registered new interface driver zaurus [ 2.816468] usbcore: registered new interface driver cdc_ncm [ 2.822139] usbcore: registered new interface driver aqc111 [ 2.827797] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.834120] ohci-pci: OHCI PCI platform driver [ 2.838161] ohci-platform: OHCI generic platform driver [ 2.844035] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.850546] usbcore: registered new interface driver uas [ 2.854712] usbcore: registered new interface driver usb-storage [ 2.860644] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.866899] mousedev: PS/2 mouse device common for all mice [ 2.871605] usbcore: registered new interface driver xpad [ 2.879653] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.882351] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.890404] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.897024] i2c /dev entries driver [ 2.900318] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.906133] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.911274] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.916752] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.922195] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.927374] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.932817] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.946602] device-mapper: uevent: version 1.0.3 [ 2.947033] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.953532] cpuidle: Initializing cpuidle driver [ 2.957259] sdhci: Secure Digital Host Controller Interface driver [ 2.961971] sdhci: Copyright(c) Pierre Ossman [ 2.966320] Synopsys Designware Multimedia Card Interface Driver [ 2.972245] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.978194] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.979118] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.991804] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.013185] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.023115] vdd-1v0: supplied by regulator-dummy [ 3.028676] vdd-1v8-hs: supplied by regulator-dummy [ 3.033542] vdd-1v8-ls: supplied by regulator-dummy [ 3.038502] vdd-1v8-ao: supplied by regulator-dummy [ 3.042494] vddio-ddr-1v1: supplied by regulator-dummy [ 3.047103] vdd-rtc: supplied by regulator-dummy [ 3.048882] spmic-ldo1: supplied by regulator-dummy [ 3.050255] vdd-ao-3v3: supplied by regulator-dummy [ 3.056534] vddio-emmc-3v3: supplied by regulator-dummy [ 3.062845] spmic-ldo4: supplied by regulator-dummy [ 3.064194] vdd-usb-3v3: supplied by regulator-dummy [ 3.070522] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.076793] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.082416] spmic-ldo8: supplied by vdd-1v8-ls [ 3.083917] gpio-510 (gpio_default): hogged as output/high [ 3.085306] gpio-511 (gpio_default): hogged as output/high [ 3.088174] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.223970] max77686-rtc max77620-rtc: registered as rtc0 [ 3.225017] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.225353] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.068260] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.069679] hid: raw HID events driver (C) Jiri Kosina [ 4.070691] usbcore: registered new interface driver usbhid [ 4.070860] usbhid: USB HID core driver [ 4.073563] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.074898] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.846680] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.920235] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.363 ms) ÿá[ 4.158373] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.159053] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.160179] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.160944] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.162842] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.163442] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.164040] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.165315] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.165631] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.167673] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.174915] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.181060] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.185796] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.192505] denver_knobs_init:MTS_VERSION:55637613 [ 4.205389] t19x_cache tegra-cache: probed [ 4.209594] optee: probing for conduit method. [ 4.210503] optee: revision 3.16 (65cc2218) [ 4.211707] optee: dynamic shared memory is enabled [ 4.213303] optee: initialized driver [ 4.218997] nvpmodel: initialized successfully [ 4.220512] tegra_hv: get_hvd: not initialized yet [ 4.225307] user_ivc_mempool: hypervisor not present [ 4.231586] usbcore: registered new interface driver snd-usb-audio [ 4.237630] u32 classifier [ 4.239097] input device check on [ 4.242768] Actions configured [ 4.246661] Initializing XFRM netlink socket [ 4.251620] NET: Registered protocol family 10 [ 4.257889] Segment Routing with IPv6 [ 4.259000] NET: Registered protocol family 17 [ 4.262965] NET: Registered protocol family 15 [ 4.267676] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.281337] Bluetooth: RFCOMM socket layer initialized [ 4.285624] Bluetooth: RFCOMM ver 1.11 [ 4.289775] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.295365] Bluetooth: HIDP socket layer initialized [ 4.301625] 9pnet: Installing 9P2000 support [ 4.304878] Key type dns_resolver registered [ 4.310459] registered taskstats version 1 [ 4.313517] Loading compiled-in X.509 certificates [ 4.326589] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.328865] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.339292] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.341217] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.349982] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.358269] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.474275] tegra194-pcie 14160000.pcie: Link up [ 4.477137] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.477344] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.477513] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.477747] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.477944] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.478347] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.478789] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.487917] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.488493] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.488915] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.490474] pci 0004:01:00.0: supports D1 D2 [ 4.490627] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.500014] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.500457] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.500696] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.501145] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.501418] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.503113] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.508861] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.516249] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.525228] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.535128] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.539983] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.545547] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.551993] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.561303] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.563077] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.571213] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.579996] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.686383] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.686954] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.687157] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.687347] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.687605] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.687807] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.688217] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.688620] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.703807] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.704110] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.705655] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.707006] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.708654] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.710030] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.710961] pci 0005:00:00.0: Removing from iommu group 7 [ 5.711235] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.743644] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.765545] host1x 13e10000.host1x: initialized [ 5.767351] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.768379] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.769493] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.770399] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.771391] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.772041] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.772976] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.773599] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.779488] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.786513] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.796261] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.803601] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.813360] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.820500] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.830126] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.837229] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.847320] falcon 15340000.vic: Adding to iommu group 17 [ 5.861325] falcon 15340000.vic: initialized [ 5.862321] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.868123] falcon 15380000.nvjpg: initialized [ 5.868690] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.880663] falcon 154c0000.nvenc: initialized [ 5.881202] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.889710] falcon 15a80000.nvenc1: initialized [ 5.890304] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.902187] nvdec 15480000.nvdec: initialized [ 5.902836] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.911745] nvdec 15140000.nvdec1: initialized [ 5.912269] tsec 15500000.tsec: Adding to iommu group 18 [ 5.919170] tsec 15500000.tsec: initialized [ 5.919667] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.927959] tsec 15100000.tsecb: initialized [ 5.931658] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.954628] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.964890] gpio-374 (wifi-enable): hogged as output/high [ 5.965193] gpio-431 (camera-control-output-low): hogged as output/low [ 5.965499] gpio-432 (camera-control-output-low): hogged as output/low [ 5.967659] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.969513] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.971812] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.978436] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.983975] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.989821] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.995263] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.003189] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.011076] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.022446] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.027705] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.033612] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.042337] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.051436] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.058931] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.066533] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.072505] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.082568] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.088675] pva 16000000.pva0: Adding to iommu group 22 [ 6.115458] pva 16000000.pva0: initialized [ 6.120359] pva 16800000.pva1: Adding to iommu group 23 [ 6.131352] pva 16800000.pva1: initialized [ 6.135311] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.155444] nvdla 15880000.nvdla0: initialized [ 6.156715] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.172507] nvdla 158c0000.nvdla1: initialized [ 6.174892] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.175166] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.175588] tegradccommon 15200000.display-hub: dma mapping done [ 6.177510] tegradc 15200000.display: Adding to iommu group 26 [ 6.185119] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.185477] generic_infoframe_type: 0x87 [ 6.185751] tegradc 15200000.display: DT parsed successfully [ 6.186125] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.186864] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.187167] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.190877] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.196896] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.202877] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.207812] tegra_cec 3960000.tegra_cec: probed [ 6.213821] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.214195] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.215757] tegradc 15210000.display: Adding to iommu group 26 [ 6.220606] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.220613] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.232740] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.243490] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.248514] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.268006] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.268517] kfuse 3830000.kfuse: initialized [ 6.283305] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.289033] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.289536] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.296096] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.308961] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.309625] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.317465] tegradc 15210000.display: disp0 connected to head1->sor [ 6.326579] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.330975] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.337193] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.343860] tegradc 15210000.display: DT parsed successfully [ 6.354410] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.357941] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.364673] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.392036] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.392420] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.395515] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.404188] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.412822] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.419301] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.426952] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.434308] usb usb1: Product: xHCI Host Controller [ 6.438857] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.445182] usb usb1: SerialNumber: 3610000.xhci [ 6.451033] hub 1-0:1.0: USB hub found [ 6.453957] hub 1-0:1.0: 4 ports detected [ 6.458704] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.463385] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.470758] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.478769] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.486681] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.493606] usb usb2: Product: xHCI Host Controller [ 6.498541] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.504761] usb usb2: SerialNumber: 3610000.xhci [ 6.510444] hub 2-0:1.0: USB hub found [ 6.513236] hub 2-0:1.0: 4 ports detected [ 6.551237] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.556629] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.557799] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.557983] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.570964] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1904000 KHz, changing to: 1907200 KHz [ 6.571981] tegra194-cpufreq ccplex: probed with BWMGR [ 6.573262] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.573998] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.574453] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.575728] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.588271] mmc0: CQHCI version 5.10 [ 6.590395] tegra194-vi5 15c10000.vi: initialized [ 6.592340] tegradc 15210000.display: disp0 connected to head1->sor [ 6.593600] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.596919] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.603573] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.610396] tegradc 15210000.display: DT parsed successfully [ 6.617544] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.618570] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.623993] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.624096] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.631714] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.631721] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.631726] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.638314] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.638586] generic_infoframe_type: 0x87 [ 6.645968] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.645974] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.647313] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.652771] tegradc 15200000.display: DT parsed successfully [ 6.666141] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.672462] nvethernet 2490000.ethernet: Macsec not supported [ 6.673864] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.679463] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.683584] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.689608] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.689611] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.689965] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.696590] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.704223] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.704393] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.710036] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.718810] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.724620] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.731299] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.739625] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.741236] tegra-se-nvhost 15810000.se: initialized [ 6.746546] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.764217] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.764806] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.767736] ************************************** [ 6.767739] CPU:0, Error:cbb-noc [ 6.767742] Error Logger : 0 [ 6.767752] ErrLog0 : 0x80030000 [ 6.767755] Transaction Type : RD - Read, Incrementing [ 6.767758] Error Code : SLV [ 6.767760] Error Source : Target [ 6.767763] Error Description : Target error detected by CBB slave [ 6.767773] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.890060] Packet header Lock : 0 [ 6.893643] Packet header Len1 : 3 [ 6.897319] NOC protocol version : version >= 2.7 [ 6.902307] ErrLog1 : 0x35242e [ 6.905286] ErrLog2 : 0x0 [ 6.908431] RouteId : 0x35242e [ 6.911845] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.916399] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.921211] TargSubRange : 18 [ 6.924706] SeqId : 0 [ 6.927267] ErrLog3 : 0x4045c [ 6.930485] ErrLog4 : 0x0 [ 6.933633] Address accessed : 0x15b4045c [ 6.937918] ErrLog5 : 0xb89f851 [ 6.941332] Non-Modify : 0x1 [ 6.944744] AXI ID : 0x17 [ 6.947893] Master ID : CCPLEX [ 6.951220] Security Group(GRPSEC): 0x7e [ 6.955161] Cache : 0x1 -- Bufferable [ 6.959620] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.966443] FALCONSEC : 0x0 [ 6.969594] Virtual Queuing Channel(VQC): 0x0 [ 6.974233] ************************************** [ 6.979015] ------------[ cut here ]------------ [ 6.983512] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.990334] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.995325] Modules linked in: [ 6.998303] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 7.004967] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.017460] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.023500] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.028238] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.032685] sp : ffff800010003de0 [ 7.036362] x29: ffff800010003de0 x28: 0000000000000001 [ 7.041782] x27: 0000000000000005 x26: ffffab2e62d63f58 [ 7.047207] x25: ffffab2e636bce10 x24: 0000000000000001 [ 7.052374] x23: ffffab2e63057000 x22: ffffab2e634dea00 [ 7.057970] x21: 000000000000000f x20: ffff5e7300ea5880 [ 7.063224] x19: ffffab2e634dea00 x18: 0000000000000010 [ 7.068649] x17: ffffab2e62e0d008 x16: 000000007201f98a [ 7.074244] x15: ffffab2e63352bf0 x14: 0720072007200720 [ 7.079756] x13: 0720072007200720 x12: 0720072007200720 [ 7.085268] x11: 0720072007200720 x10: 0720072007200720 [ 7.090783] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.096038] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.101549] x5 : 0000000000057fa8 x4 : ffffab2e63367968 [ 7.107246] x3 : 00000000ffffffff x2 : ffffab2e617fe090 [ 7.112311] x1 : ffffab2e63352680 x0 : 0000000100010001 [ 7.117649] Call trace: [ 7.120105] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.124669] __handle_irq_event_percpu+0x68/0x2a0 [ 7.129196] handle_irq_event_percpu+0x40/0xa0 [ 7.133675] handle_irq_event+0x50/0xf0 [ 7.137422] handle_fasteoi_irq+0xc0/0x170 [ 7.141447] generic_handle_irq+0x40/0x60 [ 7.145213] __handle_domain_irq+0x70/0xd0 [ 7.149672] efi_header_end+0xb0/0xf0 [ 7.153188] el1_irq+0xd0/0x180 [ 7.156148] cpuidle_enter_state+0xb8/0x410 [ 7.160346] cpuidle_enter+0x40/0x60 [ 7.163864] call_cpuidle+0x44/0x80 [ 7.167346] do_idle+0x208/0x270 [ 7.170758] cpu_startup_entry+0x2c/0x70 [ 7.174285] rest_init+0xdc/0xe8 [ 7.177504] arch_call_rest_init+0x18/0x20 [ 7.181701] start_kernel+0x514/0x54c [ 7.185292] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.191502] ---[ end trace a2f14782f838fdff ]--- [ 7.196220] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.203744] SMP: stopping secondary CPUs [ 7.207357] Kernel Offset: 0x2b2e51640000 from 0xffff800010000000 [ 7.213461] PHYS_OFFSET: 0xffffa18e00000000 [ 7.217832] CPU features: 0x8240002,03802a30 [ 7.222036] Memory Limit: none [ 7.225192] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.029] > DEVICE_PROD: device prod is not initialized. [0002.335] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.336] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.336] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.337] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.337] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.337] I> dram_block larger than 80000000 [0002.340] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.351] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.355] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.585] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 1ÿâclk_dt_late initialized ÿä1ÿânoc_late initialized pm_post initialized dbells initialized ÿä 03ÿâdmce initialized ÿä:ÿâcvc initialized ÿä23:20 UTC 20ÿâavfs_clk_mach_post initialized ÿä22 aaÿâavfs_clk_platform_post initialized ÿärcÿâcvc_late initialized regulator_post initialized ÿäh64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.642] I> edid read success [0003.642] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.653] I> width = 1280, height = 720, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 4096, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.727] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.741] initializing target [0003.742] calling apps_init() [0003.743] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000800] Console: colour dummy device 80x25 [ 0.002339] printk: console [tty0] enabled [ 0.002414] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002451] pid_max: default: 32768 minimum: 301 [ 0.002729] LSM: Security Framework initializing [ 0.002806] Yama: becoming mindful. [ 0.002851] SELinux: Initializing. [ 0.003051] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003090] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006410] rcu: Hierarchical SRCU implementation. [ 0.006669] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007470] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007506] DTB Build time: Aug 10 2022 20:31:49 [ 0.010640] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010873] Remapping and enabling EFI services. [ 0.012794] smp: Bringing up secondary CPUs ... [ 0.042234] Detected PIPT I-cache on CPU1 [ 0.042392] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073502] Detected PIPT I-cache on CPU2 [ 0.073647] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103299] Detected PIPT I-cache on CPU3 [ 0.103437] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133268] Detected PIPT I-cache on CPU4 [ 0.133369] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163275] Detected PIPT I-cache on CPU5 [ 0.163458] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163903] smp: Brought up 1 node, 6 CPUs [ 0.164095] SMP: Total of 6 processors activated. [ 0.164155] CPU features: detected: Privileged Access Never [ 0.164179] CPU features: detected: LSE atomic instructions [ 0.164193] CPU features: detected: User Access Override [ 0.164207] CPU features: detected: 32-bit EL0 Support [ 0.164221] CPU features: detected: RAS Extension Support [ 0.164234] CPU features: detected: CRC32 instructions [ 0.164248] CPU features: detected: 32-bit EL1 Support [ 0.235415] CPU: All CPU(s) started at EL2 [ 0.242131] devtmpfs: initialized [ 0.291753] Registered cp15_barrier emulation handler [ 0.291877] Registered setend emulation handler [ 0.291897] KASLR enabled [ 0.292170] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.292198] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293510] pinctrl core: initialized pinctrl subsystem [ 0.294490] SMBIOS 3.0.0 present. [ 0.294523] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.295218] NET: Registered protocol family 16 [ 0.297252] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.297749] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.298464] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.298526] audit: initializing netlink subsys (disabled) [ 0.298739] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.299171] thermal_sys: Registered thermal governor 'step_wise' [ 0.299177] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299191] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.302788] cpuidle: using governor menu [ 0.303237] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.303679] ASID allocator initialised with 32768 entries [ 0.303912] Serial: AMBA PL011 UART driver [ 0.307397] Tegra reboot handler registered. [ 0.379784] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.379910] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.380097] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.380146] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.380270] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.380332] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.380447] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.380492] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.380605] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.380647] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.382766] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.382800] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.382829] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.382857] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.382887] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.382913] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.382950] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.382982] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.383008] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.383033] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.383057] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.383081] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.383105] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.383129] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.383153] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.383185] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.383209] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.383332] mc-err: mcerr ops are set to t19x [ 0.395067] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.395093] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.395109] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.395121] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.401728] ACPI: Interpreter disabled. [ 0.402868] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.404228] iommu: Default domain type: Translated [ 0.404293] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.404646] SCSI subsystem initialized [ 0.404801] usbcore: registered new interface driver usbfs [ 0.404842] usbcore: registered new interface driver hub [ 0.404885] usbcore: registered new device driver usb [ 0.405334] mc: Linux media interface: v0.10 [ 0.405363] videodev: Linux video capture interface: v2.00 [ 0.405704] pps_core: LinuxPPS API ver. 1 registered [ 0.405715] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.405734] PTP clock support registered [ 0.405952] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.406295] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.406378] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.407009] Registered efivars operations [ 0.413431] FPGA manager framework [ 0.413548] Advanced Linux Sound Architecture Driver Initialized. [ 0.414038] Bluetooth: Core ver 2.22 [ 0.414077] NET: Registered protocol family 31 [ 0.414089] Bluetooth: HCI device and connection manager initialized [ 0.414103] Bluetooth: HCI socket layer initialized [ 0.414118] Bluetooth: L2CAP socket layer initialized [ 0.414138] Bluetooth: SCO socket layer initialized [ 0.415645] camchar: rtcpu character device driver loaded [ 0.416392] clocksource: Switched to clocksource arch_sys_counter [ 0.771058] VFS: Disk quotas dquot_6.6.0 [ 0.771128] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.771474] pnp: PnP ACPI: disabled [ 0.781464] la/ptsa driver initialized. [ 0.781632] NET: Registered protocol family 2 [ 0.781795] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.786334] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.786396] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.786735] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.787169] TCP: Hash tables configured (established 65536 bind 65536) [ 0.787295] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.787392] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.787590] NET: Registered protocol family 1 [ 0.788220] RPC: Registered named UNIX socket transport module. [ 0.788256] RPC: Registered udp transport module. [ 0.788267] RPC: Registered tcp transport module. [ 0.788276] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.788301] PCI: CLS 0 bytes, default 64 [ 0.788544] Trying to unpack rootfs image as initramfs... [ 0.980587] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.982802] Freeing initrd memory: 8196K [ 0.987739] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.987806] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.987842] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.988339] kvm [1]: IPA Size Limit: 40 bits [ 0.988857] kvm [1]: vgic interrupt IRQ9 [ 0.989371] kvm [1]: VHE mode initialized successfully [ 0.990824] Initialise system trusted keyrings [ 0.991082] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.995926] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.996739] NFS: Registering the id_resolver key type [ 0.996768] Key type id_resolver registered [ 0.996777] Key type id_legacy registered [ 0.996861] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.996879] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.996906] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.005722] NET: Registered protocol family 38 [ 1.005745] Key type asymmetric registered [ 1.005759] Asymmetric key parser 'x509' registered [ 1.005799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.006009] io scheduler mq-deadline registered [ 1.006023] io scheduler kyber registered [ 1.011162] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.013673] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.013732] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.013800] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.013867] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.013932] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.018079] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.018229] scrncapt: init (heads:4 wins:6 planes:4) [ 1.019129] EINJ: ACPI disabled. [ 1.021723] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.021744] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.021754] tegra-pmc: ### PMC reset level: L1 [ 1.021763] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.021801] tegra-pmc: PMC Prod config success [ 1.025890] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.029966] random: fast init done [ 1.030088] printk: console [ttyTCU0] enabled [ 2.582843] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.587032] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.591597] arm-smmu 10000000.iommu: stage 1 translation [ 2.596890] arm-smmu 10000000.iommu: stage 2 translation [ 2.602593] arm-smmu 10000000.iommu: nested translation [ 2.607702] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.614847] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.626312] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.628483] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.634781] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.642852] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.648079] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.652834] arm-smmu 12000000.iommu: stage 1 translation [ 2.658098] arm-smmu 12000000.iommu: stage 2 translation [ 2.663740] arm-smmu 12000000.iommu: nested translation [ 2.668911] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.676088] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.687601] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.689216] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.696026] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.703519] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.712725] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.716192] tegra_profiler: auth: init [ 2.720739] THERMAL EST: found 3 subdevs [ 2.723837] THERMAL EST num_resources: 0 [ 2.727968] [THERMAL EST subdev 0] [ 2.731063] [THERMAL EST subdev 1] [ 2.734726] [THERMAL EST subdev 2] [ 2.737690] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.744178] THERMAL EST: thz register success. [ 2.748412] THERMAL EST: end of probe, return err: 0 [ 2.753945] nvsciipc: loaded module [ 2.760986] tun: Universal TUN/TAP device driver, 1.6 [ 2.763216] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.769711] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.775268] e1000e: Intel(R) PRO/1000 Network Driver [ 2.780212] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.786098] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.791587] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.797857] PPP generic driver version 2.4.2 [ 2.801755] PPP BSD Compression module registered [ 2.806294] PPP Deflate Compression module registered [ 2.811540] PPP MPPE Compression module registered [ 2.816839] usbcore: registered new interface driver r8152 [ 2.822061] usbcore: registered new interface driver asix [ 2.827403] usbcore: registered new interface driver ax88179_178a [ 2.833522] usbcore: registered new interface driver cdc_ether [ 2.839739] usbcore: registered new interface driver net1080 [ 2.845325] usbcore: registered new interface driver cdc_subset [ 2.851128] usbcore: registered new interface driver zaurus [ 2.856809] usbcore: registered new interface driver cdc_ncm [ 2.862485] usbcore: registered new interface driver aqc111 [ 2.868128] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.874458] ohci-pci: OHCI PCI platform driver [ 2.878771] ohci-platform: OHCI generic platform driver [ 2.884629] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.890726] usbcore: registered new interface driver uas [ 2.894804] usbcore: registered new interface driver usb-storage [ 2.901247] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.906916] mousedev: PS/2 mouse device common for all mice [ 2.912212] usbcore: registered new interface driver xpad [ 2.919924] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.922703] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.930502] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.937009] i2c /dev entries driver [ 2.940622] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.946184] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.951946] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.956881] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.962238] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.967789] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.973447] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.986708] device-mapper: uevent: version 1.0.3 [ 2.987084] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.993407] cpuidle: Initializing cpuidle driver [ 2.997331] sdhci: Secure Digital Host Controller Interface driver [ 3.002540] sdhci: Copyright(c) Pierre Ossman [ 3.006383] Synopsys Designware Multimedia Card Interface Driver [ 3.012819] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.018737] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.024777] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.031881] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.049259] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.057906] vdd-1v0: supplied by regulator-dummy [ 3.063300] vdd-1v8-hs: supplied by regulator-dummy [ 3.067973] vdd-1v8-ls: supplied by regulator-dummy [ 3.072687] vdd-1v8-ao: supplied by regulator-dummy [ 3.076505] vddio-ddr-1v1: supplied by regulator-dummy [ 3.080838] vdd-rtc: supplied by regulator-dummy [ 3.082556] spmic-ldo1: supplied by regulator-dummy [ 3.083730] vdd-ao-3v3: supplied by regulator-dummy [ 3.089807] vddio-emmc-3v3: supplied by regulator-dummy [ 3.095912] spmic-ldo4: supplied by regulator-dummy [ 3.097101] vdd-usb-3v3: supplied by regulator-dummy [ 3.103723] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.109771] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.115164] spmic-ldo8: supplied by vdd-1v8-ls [ 3.116513] gpio-510 (gpio_default): hogged as output/high [ 3.118798] gpio-511 (gpio_default): hogged as output/high [ 3.125514] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.264563] max77686-rtc max77620-rtc: registered as rtc0 [ 3.265848] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.266171] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.003031] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.004006] hid: raw HID events driver (C) Jiri Kosina [ 4.004740] usbcore: registered new interface driver usbhid [ 4.004893] usbhid: USB HID core driver [ 4.006578] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.007703] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.063706] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.139269] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.373 ms) ÿá[ 4.092832] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.093360] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.094448] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.095227] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.096811] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.097517] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.098109] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.099252] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.099562] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.101500] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.109026] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.115386] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.120504] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.127912] denver_knobs_init:MTS_VERSION:55637613 [ 4.139596] t19x_cache tegra-cache: probed [ 4.142490] optee: probing for conduit method. [ 4.143334] optee: revision 3.16 (65cc2218) [ 4.144235] optee: dynamic shared memory is enabled [ 4.147853] optee: initialized driver [ 4.154220] nvpmodel: initialized successfully [ 4.155621] tegra_hv: get_hvd: not initialized yet [ 4.160362] user_ivc_mempool: hypervisor not present [ 4.166441] usbcore: registered new interface driver snd-usb-audio [ 4.172932] u32 classifier [ 4.173841] input device check on [ 4.177905] Actions configured [ 4.181137] Initializing XFRM netlink socket [ 4.186387] NET: Registered protocol family 10 [ 4.192554] Segment Routing with IPv6 [ 4.193692] NET: Registered protocol family 17 [ 4.197771] NET: Registered protocol family 15 [ 4.202409] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.216483] Bluetooth: RFCOMM socket layer initialized [ 4.220695] Bluetooth: RFCOMM ver 1.11 [ 4.224279] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.230425] Bluetooth: HIDP socket layer initialized [ 4.236016] 9pnet: Installing 9P2000 support [ 4.239593] Key type dns_resolver registered [ 4.245538] registered taskstats version 1 [ 4.248240] Loading compiled-in X.509 certificates [ 4.261213] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.264337] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.273995] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.276194] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.284693] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.293315] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.408444] tegra194-pcie 14160000.pcie: Link up [ 4.411302] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.411539] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.411687] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.411951] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.412142] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.412567] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.412998] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.425267] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.425779] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.426329] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.427921] pci 0004:01:00.0: supports D1 D2 [ 4.428159] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.436571] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.436895] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.437129] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.437490] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.437772] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.437965] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.443050] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.450484] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.459240] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.469697] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.474283] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.479816] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.486325] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.495059] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.496892] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.505739] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.513927] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.616540] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.617264] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.617477] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.617626] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.617915] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.618160] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.618513] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.618965] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.634778] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.635118] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.637047] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.638406] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.639961] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.641739] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.642530] pci 0005:00:00.0: Removing from iommu group 7 [ 5.642844] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.670918] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.692544] host1x 13e10000.host1x: initialized [ 5.693947] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.694691] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.695695] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.696466] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.697382] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.697997] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.698928] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.699714] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.709915] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.716930] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.726549] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.733407] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.743707] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.750949] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.760911] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.767466] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.777626] falcon 15340000.vic: Adding to iommu group 17 [ 5.791732] falcon 15340000.vic: initialized [ 5.792642] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.798176] falcon 15380000.nvjpg: initialized [ 5.798773] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.809708] falcon 154c0000.nvenc: initialized [ 5.810215] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.820003] falcon 15a80000.nvenc1: initialized [ 5.820544] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.832299] nvdec 15480000.nvdec: initialized [ 5.832812] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.842659] nvdec 15140000.nvdec1: initialized [ 5.843180] tsec 15500000.tsec: Adding to iommu group 18 [ 5.848683] tsec 15500000.tsec: initialized [ 5.849162] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.857501] tsec 15100000.tsecb: initialized [ 5.860948] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.886218] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.897083] gpio-374 (wifi-enable): hogged as output/high [ 5.897369] gpio-431 (camera-control-output-low): hogged as output/low [ 5.897664] gpio-432 (camera-control-output-low): hogged as output/low [ 5.899398] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.901315] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.902185] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.908809] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.913901] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.919947] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.925230] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.933705] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.941285] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.952520] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.957681] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.963824] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.972732] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.981716] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.988657] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.996771] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.003009] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.012492] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.018898] pva 16000000.pva0: Adding to iommu group 22 [ 6.045126] pva 16000000.pva0: initialized [ 6.049951] pva 16800000.pva1: Adding to iommu group 23 [ 6.060724] pva 16800000.pva1: initialized [ 6.064896] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.076547] nvdla 15880000.nvdla0: initialized [ 6.077699] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.093620] nvdla 158c0000.nvdla1: initialized [ 6.096960] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.097250] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.097287] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.097508] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.097887] tegradc 15200000.display: Adding to iommu group 26 [ 6.097895] tegradccommon 15200000.display-hub: dma mapping done [ 6.100620] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.102718] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.107296] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.107428] tegradc 15210000.display: Adding to iommu group 26 [ 6.108860] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.114730] generic_infoframe_type: 0x87 [ 6.120824] tegra_cec 3960000.tegra_cec: probed [ 6.126578] tegradc 15200000.display: DT parsed successfully [ 6.131354] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.134895] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.142996] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.162150] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.162299] kfuse 3830000.kfuse: initialized [ 6.169621] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.174538] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.181928] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.196741] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.197031] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.203673] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.208979] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.221332] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.222232] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.243405] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.243675] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.247363] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.263185] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.264669] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.271368] tegradc 15210000.display: disp0 connected to head1->sor [ 6.276223] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.282020] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.298381] tegradc 15210000.display: DT parsed successfully [ 6.302996] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.303486] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.313072] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.326730] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.334809] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.343411] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.349965] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.357329] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.364642] usb usb1: Product: xHCI Host Controller [ 6.369624] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.375814] usb usb1: SerialNumber: 3610000.xhci [ 6.381523] hub 1-0:1.0: USB hub found [ 6.384709] hub 1-0:1.0: 4 ports detected [ 6.389290] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.393878] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.401736] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.409108] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.417316] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.424605] usb usb2: Product: xHCI Host Controller [ 6.429549] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.435747] usb usb2: SerialNumber: 3610000.xhci [ 6.440930] hub 2-0:1.0: USB hub found [ 6.443987] hub 2-0:1.0: 4 ports detected [ 6.482107] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.487892] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.489248] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.489493] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.502695] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.503746] tegra194-cpufreq ccplex: probed with BWMGR [ 6.505130] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.505794] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.506300] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.507529] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.519663] mmc0: CQHCI version 5.10 [ 6.520658] tegra194-vi5 15c10000.vi: initialized [ 6.522275] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.527876] generic_infoframe_type: 0x87 [ 6.532438] tegradc 15200000.display: DT parsed successfully [ 6.533864] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.537800] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.544285] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.553273] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.559583] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.559593] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.568231] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.568240] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.574366] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.580813] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.581655] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.589744] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.597792] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.603950] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.611618] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.611626] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.651244] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.651446] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.656431] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.676474] nvethernet 2490000.ethernet: Macsec not supported [ 6.676782] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.683531] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.689143] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.706667] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.707079] tegradc 15200000.display: probed [ 6.710669] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.722120] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.730555] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.737209] tegra-se-nvhost 15810000.se: initialized [ 6.745403] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.746510] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.753114] tegra-se-nvhost 15820000.se: initialized [ 6.759622] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.764131] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.769983] Console: switching to colour frame buffer device 240x67 [ 6.770358] tegra-se-nvhost 15830000.se: initialized [ 6.776128] tegradc 15200000.display: fb registered [ 6.782085] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.785979] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.792427] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.798628] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.804445] tegra-se-nvhost 15840000.se: initialized [ 6.804772] mmc0: Command Queue Engine enabled [ 6.804776] mmc0: periodic cache flush enabled [ 6.804790] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.805287] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.805444] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.809171] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.809946] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.816061] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.836221] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.843312] tegra_actmon d230000.actmon: in actmon_register()... [ 6.849965] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.849970] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.849979] usb 1-2: Manufacturer: Generic [ 6.856110] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.864255] hub 1-2:1.0: USB hub found [ 6.870729] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.873084] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.874204] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.874212] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.874872] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.874876] Extcon AUX1(HDMI) enable [ 6.875023] tegradc 15210000.display: disp1 connected to head1->sor [ 6.875171] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.875260] tegradc 15210000.display: DT parsed successfully [ 6.875294] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.875408] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.875415] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.877593] hub 1-2:1.0: 4 ports detected [ 6.882105] tegradc 15210000.display: probed [ 6.884158] hvc_sysfs: hypervisor is not present [ 6.953290] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.983578] ALSA device list: [ 7.008331] No soundcards found. [ 7.008336] tegradc 15210000.display: fb registered [ 7.011999] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.023985] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.023995] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.036792] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.045280] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.045284] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.045288] usb 2-3: Manufacturer: Generic [ 7.045307] tegradc 15210000.display: blank - powerdown [ 7.066570] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.066573] Extcon DP: HPD disabled [ 7.066594] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.066609] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.075779] Freeing unused kernel memory: 3968K [ 7.078267] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.085409] Run /init as init process [ 7.095991] hub 2-3:1.0: USB hub found [ 7.108218] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.114613] tegradc 15200000.display: blank - powerdown [ 7.136427] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.156426] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.156939] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.156944] Extcon AUX1(HDMI) disable [ 7.180277] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.181176] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.194728] tegradc 15200000.display: unblank [ 7.195805] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.196001] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.200967] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.200972] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.201941] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.203840] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.207836] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.207840] Extcon AUX1(HDMI) enable [ 7.220593] tegradc 15200000.display: sync windows ret = 246 [ 7.252632] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.254098] Extcon HDMI: HPD enabled [ 7.255430] tegradc 15200000.display: hdmi: plugged [ 7.303325] Root device found: mmcblk0p1 [ 7.305756] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.306786] Found dev node: /dev/mmcblk0p1 [ 7.307191] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.309990] usb 1-3: Product: Bluetooth Radio [ 7.311290] usb 1-3: Manufacturer: Realtek [ 7.312604] usb 1-3: SerialNumber: 00e04c000001 [ 7.343295] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.348902] Rootfs mounted over mmcblk0p1 [ 7.380608] Switching from initrd to actual rootfs [ 7.546204] systemd[1]: System time before build time, advancing clock. [ 7.615953] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.620919] systemd[1]: Detected architecture arm64. [ 7.677177] systemd[1]: Set hostname to . [ 7.742172] random: crng init done [ 7.842221] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.183715] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.185449] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.191131] systemd[1]: Created slice system-modprobe.slice. [ 8.195781] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.199905] systemd[1]: Created slice User and Session Slice. [ 8.203304] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.207372] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.210884] systemd[1]: Reached target User and Group Name Lookups. [ 8.214093] systemd[1]: Reached target Slices. [ 8.217208] systemd[1]: Reached target Swap. [ 8.221211] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.224877] systemd[1]: Listening on Syslog Socket. [ 8.228522] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.231944] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.236269] systemd[1]: Listening on Journal Audit Socket. [ 8.239930] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.245238] systemd[1]: Listening on Journal Socket. [ 8.248940] systemd[1]: Listening on udev Control Socket. [ 8.253804] systemd[1]: Listening on udev Kernel Socket. [ 8.262187] systemd[1]: Mounting Huge Pages File System... [ 8.270732] systemd[1]: Mounting POSIX Message Queue File System... [ 8.279051] systemd[1]: Mounting RPC Pipe File System... [ 8.287810] systemd[1]: Mounting Kernel Debug File System... [ 8.296172] systemd[1]: Mounting Kernel Trace File System... [ 8.306000] systemd[1]: Starting Journal Service... [ 8.314747] systemd[1]: Starting Set the console keyboard layout... [ 8.323046] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.326549] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.333145] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.341125] systemd[1]: Started Nameserver information manager. [ 8.345741] systemd[1]: Reached target Network (Pre). [ 8.352726] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.354669] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.361061] systemd[1]: Starting Load Kernel Modules... [ 8.369130] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.378579] systemd[1]: Starting udev Coldplug all Devices... [ 8.389149] systemd[1]: Mounted Huge Pages File System. [ 8.393961] systemd[1]: Mounted POSIX Message Queue File System. [ 8.397662] systemd[1]: Mounted RPC Pipe File System. [ 8.398765] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.403746] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.406114] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.407630] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.409243] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.410621] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.412876] systemd[1]: Mounted Kernel Debug File System. [ 8.417046] systemd[1]: Mounted Kernel Trace File System. [ 8.420462] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.420662] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.423685] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.425431] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.432560] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.438366] systemd[1]: nvfb-udev.service: Succeeded. [ 8.442756] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.456460] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.461508] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.463230] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.477660] systemd[1]: Starting Load/Save Random Seed... [ 8.485674] systemd[1]: Starting Create System Users... [ 8.532134] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.532134] [ 8.542030] systemd[1]: Finished Create System Users. [ 8.560459] systemd[1]: Finished Load/Save Random Seed. [ 8.567586] systemd[1]: Finished Load Kernel Modules. [ 8.577597] systemd[1]: Finished Set the console keyboard layout. [ 8.582073] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.589595] systemd[1]: Mounting Kernel Configuration File System... [ 8.597948] systemd[1]: Started OP-TEE Client Supplicant. [ 8.606489] systemd[1]: Starting Apply Kernel Variables... [ 8.615018] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.625753] systemd[1]: Mounted Kernel Configuration File System. [ 10.041277] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.047725] imx219 9-0010: board setup failed [ 10.049076] imx219: probe of 9-0010 failed with error -121 [ 10.061323] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.066546] imx219 10-0010: board setup failed [ 10.067854] imx219: probe of 10-0010 failed with error -121 [ 10.076597] hot-surface-alert cooling state: 0 -> 1 [ 10.850210] using random self ethernet address [ 10.851871] using random host ethernet address [ 11.527288] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.527295] Creating 1 MTD partitions on "spi6.0": [ 11.527313] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.030372] using random self ethernet address [ 12.032142] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.828253] nvidia: loading out-of-tree module taints kernel. [ 59.061977] watchdog: watchdog0: watchdog did not stop! [ 59.517219] Trying to unregister non-registered hwtime source [ 62.574940] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.576943] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0,ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized noc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 aÿâavfs_clk_platform_post initialized ÿäarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.486] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.745] initializing target [0003.746] calling apps_init() [0003.746] starting app kernel_boot_app [0003.747] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000685] Console: colour dummy device 80x25 [ 0.002016] printk: console [tty0] enabled [ 0.002076] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002111] pid_max: default: 32768 minimum: 301 [ 0.002281] LSM: Security Framework initializing [ 0.002342] Yama: becoming mindful. [ 0.002389] SELinux: Initializing. [ 0.002531] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002587] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005500] rcu: Hierarchical SRCU implementation. [ 0.005742] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006553] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006608] DTB Build time: Aug 10 2022 20:31:49 [ 0.009465] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009716] Remapping and enabling EFI services. [ 0.011758] smp: Bringing up secondary CPUs ... [ 0.044486] Detected PIPT I-cache on CPU1 [ 0.044582] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074079] Detected PIPT I-cache on CPU2 [ 0.074227] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103786] Detected PIPT I-cache on CPU3 [ 0.103876] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133611] Detected PIPT I-cache on CPU4 [ 0.133771] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163442] Detected PIPT I-cache on CPU5 [ 0.163591] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163918] smp: Brought up 1 node, 6 CPUs [ 0.164127] SMP: Total of 6 processors activated. [ 0.164186] CPU features: detected: Privileged Access Never [ 0.164214] CPU features: detected: LSE atomic instructions [ 0.164234] CPU features: detected: User Access Override [ 0.164270] CPU features: detected: 32-bit EL0 Support [ 0.164301] CPU features: detected: RAS Extension Support [ 0.164320] CPU features: detected: CRC32 instructions [ 0.164356] CPU features: detected: 32-bit EL1 Support [ 0.236599] CPU: All CPU(s) started at EL2 [ 0.243238] devtmpfs: initialized [ 0.296195] Registered cp15_barrier emulation handler [ 0.296313] Registered setend emulation handler [ 0.296334] KASLR enabled [ 0.296633] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.296655] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.297994] pinctrl core: initialized pinctrl subsystem [ 0.299060] SMBIOS 3.0.0 present. [ 0.299102] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.299727] NET: Registered protocol family 16 [ 0.301674] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.302173] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.302885] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.302971] audit: initializing netlink subsys (disabled) [ 0.303247] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.303690] thermal_sys: Registered thermal governor 'step_wise' [ 0.303697] thermal_sys: Registered thermal governor 'power_allocator' [ 0.303713] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.307284] cpuidle: using governor menu [ 0.307652] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.308032] ASID allocator initialised with 32768 entries [ 0.308336] Serial: AMBA PL011 UART driver [ 0.312172] Tegra reboot handler registered. [ 0.389501] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.389610] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.389817] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.389869] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.390002] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.390036] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.390141] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.390174] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.390303] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.390355] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.392666] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.392700] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.392725] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.392771] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.392818] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.392861] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.392885] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.392924] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.392957] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.392981] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.393003] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.393025] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.393047] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.393069] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.393090] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.393113] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.393135] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.393236] mc-err: mcerr ops are set to t19x [ 0.406175] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.406202] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.406215] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.406230] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.412551] ACPI: Interpreter disabled. [ 0.413786] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.415209] iommu: Default domain type: Translated [ 0.415293] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.415721] SCSI subsystem initialized [ 0.415893] usbcore: registered new interface driver usbfs [ 0.415937] usbcore: registered new interface driver hub [ 0.415994] usbcore: registered new device driver usb [ 0.416453] mc: Linux media interface: v0.10 [ 0.416485] videodev: Linux video capture interface: v2.00 [ 0.416796] pps_core: LinuxPPS API ver. 1 registered [ 0.416808] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.416829] PTP clock support registered [ 0.417063] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.417352] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.417440] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.418072] Registered efivars operations [ 0.423599] FPGA manager framework [ 0.423716] Advanced Linux Sound Architecture Driver Initialized. [ 0.424328] Bluetooth: Core ver 2.22 [ 0.424367] NET: Registered protocol family 31 [ 0.424378] Bluetooth: HCI device and connection manager initialized [ 0.424394] Bluetooth: HCI socket layer initialized [ 0.424409] Bluetooth: L2CAP socket layer initialized [ 0.424430] Bluetooth: SCO socket layer initialized [ 0.426200] camchar: rtcpu character device driver loaded [ 0.426993] clocksource: Switched to clocksource arch_sys_counter [ 0.851454] VFS: Disk quotas dquot_6.6.0 [ 0.851530] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.851927] pnp: PnP ACPI: disabled [ 0.865052] la/ptsa driver initialized. [ 0.865218] NET: Registered protocol family 2 [ 0.865381] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.870833] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.870952] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.871463] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.872104] TCP: Hash tables configured (established 65536 bind 65536) [ 0.872312] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.872448] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.872727] NET: Registered protocol family 1 [ 0.873466] RPC: Registered named UNIX socket transport module. [ 0.873487] RPC: Registered udp transport module. [ 0.873501] RPC: Registered tcp transport module. [ 0.873515] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.873536] PCI: CLS 0 bytes, default 64 [ 0.873817] Trying to unpack rootfs image as initramfs... [ 1.143848] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.147236] Freeing initrd memory: 8196K [ 1.151720] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.151752] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.151796] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.152312] kvm [1]: IPA Size Limit: 40 bits [ 1.152959] kvm [1]: vgic interrupt IRQ9 [ 1.153472] kvm [1]: VHE mode initialized successfully [ 1.155378] Initialise system trusted keyrings [ 1.155756] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.164677] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.165818] NFS: Registering the id_resolver key type [ 1.165861] Key type id_resolver registered [ 1.165875] Key type id_legacy registered [ 1.165993] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.166017] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.166059] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.177115] NET: Registered protocol family 38 [ 1.177139] Key type asymmetric registered [ 1.177154] Asymmetric key parser 'x509' registered [ 1.177205] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.177485] io scheduler mq-deadline registered [ 1.177505] io scheduler kyber registered [ 1.183807] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.186771] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.186852] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.186925] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.187028] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.187104] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.193057] scrncapt: init (heads:4 wins:6 planes:4) [ 1.193303] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.194335] EINJ: ACPI disabled. [ 1.198177] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.198201] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.198216] tegra-pmc: ### PMC reset level: L1 [ 1.198228] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.198274] tegra-pmc: PMC Prod config success [ 1.204271] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.236414] random: fast init done [ 1.244346] printk: console [ttyTCU0] enabled [ 2.762550] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.766796] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.771392] arm-smmu 10000000.iommu: stage 1 translation [ 2.777210] arm-smmu 10000000.iommu: stage 2 translation [ 2.782361] arm-smmu 10000000.iommu: nested translation [ 2.787961] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.795141] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.806803] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.808258] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.814561] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.822464] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.827858] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.832592] arm-smmu 12000000.iommu: stage 1 translation [ 2.837856] arm-smmu 12000000.iommu: stage 2 translation [ 2.843517] arm-smmu 12000000.iommu: nested translation [ 2.848948] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.856134] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.867430] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.868964] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.875806] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.882939] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.893236] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.895968] tegra_profiler: auth: init [ 2.900476] THERMAL EST: found 3 subdevs [ 2.903902] THERMAL EST num_resources: 0 [ 2.907744] [THERMAL EST subdev 0] [ 2.910789] [THERMAL EST subdev 1] [ 2.914222] [THERMAL EST subdev 2] [ 2.917726] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.924178] THERMAL EST: thz register success. [ 2.928452] THERMAL EST: end of probe, return err: 0 [ 2.933415] nvsciipc: loaded module [ 2.941007] tun: Universal TUN/TAP device driver, 1.6 [ 2.943240] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.949482] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.954789] e1000e: Intel(R) PRO/1000 Network Driver [ 2.959989] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.965806] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.971356] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.977470] PPP generic driver version 2.4.2 [ 2.981786] PPP BSD Compression module registered [ 2.986336] PPP Deflate Compression module registered [ 2.991609] PPP MPPE Compression module registered [ 2.996341] usbcore: registered new interface driver r8152 [ 3.002109] usbcore: registered new interface driver asix [ 3.007438] usbcore: registered new interface driver ax88179_178a [ 3.013298] usbcore: registered new interface driver cdc_ether [ 3.019513] usbcore: registered new interface driver net1080 [ 3.025107] usbcore: registered new interface driver cdc_subset [ 3.030892] usbcore: registered new interface driver zaurus [ 3.036868] usbcore: registered new interface driver cdc_ncm [ 3.042288] usbcore: registered new interface driver aqc111 [ 3.047916] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.053978] ohci-pci: OHCI PCI platform driver [ 3.058539] ohci-platform: OHCI generic platform driver [ 3.064432] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.070419] usbcore: registered new interface driver uas [ 3.074849] usbcore: registered new interface driver usb-storage [ 3.081008] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.086954] mousedev: PS/2 mouse device common for all mice [ 3.092015] usbcore: registered new interface driver xpad [ 3.099868] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.102449] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.110268] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.117111] i2c /dev entries driver [ 3.120438] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.126220] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.131246] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.136926] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.142022] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.147757] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.152905] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.166810] device-mapper: uevent: version 1.0.3 [ 3.167295] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.173639] cpuidle: Initializing cpuidle driver [ 3.177275] sdhci: Secure Digital Host Controller Interface driver [ 3.182353] sdhci: Copyright(c) Pierre Ossman [ 3.186171] Synopsys Designware Multimedia Card Interface Driver [ 3.192369] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.198336] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.199321] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.212170] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.234230] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.244121] vdd-1v0: supplied by regulator-dummy [ 3.249795] vdd-1v8-hs: supplied by regulator-dummy [ 3.254655] vdd-1v8-ls: supplied by regulator-dummy [ 3.259561] vdd-1v8-ao: supplied by regulator-dummy [ 3.263594] vddio-ddr-1v1: supplied by regulator-dummy [ 3.268177] vdd-rtc: supplied by regulator-dummy [ 3.269967] spmic-ldo1: supplied by regulator-dummy [ 3.271321] vdd-ao-3v3: supplied by regulator-dummy [ 3.277644] vddio-emmc-3v3: supplied by regulator-dummy [ 3.284027] spmic-ldo4: supplied by regulator-dummy [ 3.285311] vdd-usb-3v3: supplied by regulator-dummy [ 3.291616] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.297836] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.303460] spmic-ldo8: supplied by vdd-1v8-ls [ 3.304941] gpio-510 (gpio_default): hogged as output/high [ 3.306285] gpio-511 (gpio_default): hogged as output/high [ 3.309288] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.444867] max77686-rtc max77620-rtc: registered as rtc0 [ 3.445931] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.446259] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.288349] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.289803] hid: raw HID events driver (C) Jiri Kosina [ 4.290638] usbcore: registered new interface driver usbhid [ 4.290805] usbhid: USB HID core driver [ 4.293195] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.294618] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.358367] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.432022] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.464 ms) ÿá[ 4.378327] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.379076] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.380057] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.380690] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.382430] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.383204] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.383792] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.384965] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.385186] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.387708] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.394585] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.401317] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.406359] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.412383] denver_knobs_init:MTS_VERSION:55637613 [ 4.427236] t19x_cache tegra-cache: probed [ 4.430221] optee: probing for conduit method. [ 4.431129] optee: revision 3.16 (65cc2218) [ 4.432211] optee: dynamic shared memory is enabled [ 4.433490] optee: initialized driver [ 4.439862] nvpmodel: initialized successfully [ 4.440950] tegra_hv: get_hvd: not initialized yet [ 4.445655] user_ivc_mempool: hypervisor not present [ 4.451371] usbcore: registered new interface driver snd-usb-audio [ 4.457988] u32 classifier [ 4.459599] input device check on [ 4.463133] Actions configured [ 4.466524] Initializing XFRM netlink socket [ 4.471484] NET: Registered protocol family 10 [ 4.478143] Segment Routing with IPv6 [ 4.478819] NET: Registered protocol family 17 [ 4.483242] NET: Registered protocol family 15 [ 4.487795] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.500941] Bluetooth: RFCOMM socket layer initialized [ 4.505778] Bluetooth: RFCOMM ver 1.11 [ 4.509915] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.515481] Bluetooth: HIDP socket layer initialized [ 4.521591] 9pnet: Installing 9P2000 support [ 4.525242] Key type dns_resolver registered [ 4.530500] registered taskstats version 1 [ 4.533410] Loading compiled-in X.509 certificates [ 4.546045] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.549405] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.559529] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.561255] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.570197] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.578227] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.695119] tegra194-pcie 14160000.pcie: Link up [ 4.697841] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.698053] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.698247] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.698480] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.698676] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.699112] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.699532] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.711355] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.711838] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.712257] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.713889] pci 0004:01:00.0: supports D1 D2 [ 4.714075] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.722365] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.722740] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.723087] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.723476] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.723782] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.723982] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.729706] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.737308] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.745582] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.755784] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.760806] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.766161] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.773249] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.781574] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.783837] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.792254] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.800744] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.915835] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.916493] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.916700] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.916846] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.917086] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.917325] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.917714] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.918155] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.933194] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.933616] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.935578] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.936969] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.938719] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.940677] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.941611] pci 0005:00:00.0: Removing from iommu group 7 [ 5.941899] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.972274] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.993754] host1x 13e10000.host1x: initialized [ 5.995622] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.996450] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.997537] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.998166] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.999410] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.000029] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.000899] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.001588] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.009249] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.015910] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.026064] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.032994] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.042579] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.049898] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.059510] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.066700] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.076579] falcon 15340000.vic: Adding to iommu group 17 [ 6.090844] falcon 15340000.vic: initialized [ 6.091911] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.097132] falcon 15380000.nvjpg: initialized [ 6.097725] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.109690] falcon 154c0000.nvenc: initialized [ 6.110432] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.120005] falcon 15a80000.nvenc1: initialized [ 6.120705] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.132349] nvdec 15480000.nvdec: initialized [ 6.132881] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.142334] nvdec 15140000.nvdec1: initialized [ 6.142857] tsec 15500000.tsec: Adding to iommu group 18 [ 6.148107] tsec 15500000.tsec: initialized [ 6.148591] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.156627] tsec 15100000.tsecb: initialized [ 6.160015] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.185641] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.197377] gpio-374 (wifi-enable): hogged as output/high [ 6.197732] gpio-431 (camera-control-output-low): hogged as output/low [ 6.198029] gpio-432 (camera-control-output-low): hogged as output/low [ 6.199759] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.201482] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.201987] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.208008] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.213552] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.219438] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.224577] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.233183] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.240343] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.251569] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.257305] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.262892] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.272012] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.281034] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.288291] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.295775] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.302341] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.311822] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.318341] pva 16000000.pva0: Adding to iommu group 22 [ 6.344240] pva 16000000.pva0: initialized [ 6.349427] pva 16800000.pva1: Adding to iommu group 23 [ 6.360400] pva 16800000.pva1: initialized [ 6.364515] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.377768] nvdla 15880000.nvdla0: initialized [ 6.379147] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.387963] nvdla 158c0000.nvdla1: initialized [ 6.390092] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.390361] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.390693] tegradccommon 15200000.display-hub: dma mapping done [ 6.392407] tegradc 15200000.display: Adding to iommu group 26 [ 6.400553] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.401067] generic_infoframe_type: 0x87 [ 6.401379] tegradc 15200000.display: DT parsed successfully [ 6.401668] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.407910] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.409230] tegradc 15210000.display: Adding to iommu group 26 [ 6.414251] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.427059] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.431722] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.432125] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.440222] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.445983] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.454110] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.459919] tegra_cec 3960000.tegra_cec: probed [ 6.473372] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.473521] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.478565] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.490704] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.492556] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.508325] kfuse 3830000.kfuse: initialized [ 6.513281] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.513542] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.526058] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.526419] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.533060] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.541732] tegradc 15210000.display: disp0 connected to head1->sor [ 6.546466] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.552043] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.564248] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.567800] tegradc 15210000.display: DT parsed successfully [ 6.574178] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.579125] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.597430] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.602615] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.622220] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.622565] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.625953] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.633886] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.642850] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.649259] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.657049] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.664285] usb usb1: Product: xHCI Host Controller [ 6.668926] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.675182] usb usb1: SerialNumber: 3610000.xhci [ 6.681113] hub 1-0:1.0: USB hub found [ 6.684203] hub 1-0:1.0: 4 ports detected [ 6.688674] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.693517] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.700831] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.708990] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.716405] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.723873] usb usb2: Product: xHCI Host Controller [ 6.728552] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.734784] usb usb2: SerialNumber: 3610000.xhci [ 6.740277] hub 2-0:1.0: USB hub found [ 6.743346] hub 2-0:1.0: 4 ports detected [ 6.786058] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.792356] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.794085] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.794297] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.807786] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.808880] tegra194-cpufreq ccplex: probed with BWMGR [ 6.810027] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.810769] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.811243] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.812541] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.820292] tegra194-vi5 15c10000.vi: initialized [ 6.821338] tegradc 15210000.display: disp0 connected to head1->sor [ 6.822817] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.823578] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.829932] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.837075] tegradc 15210000.display: DT parsed successfully [ 6.844859] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.844868] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.844873] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.844898] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.844909] mmc0: CQHCI version 5.10 [ 6.850486] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.863053] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.863910] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.870124] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.870131] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.871348] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.876814] generic_infoframe_type: 0x87 [ 6.879043] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.888369] tegradc 15200000.display: DT parsed successfully [ 6.894877] nvethernet 2490000.ethernet: Macsec not supported [ 6.901102] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.954263] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.954929] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.955116] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.962546] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.969767] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.976298] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.982037] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.990131] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.997710] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 7.013681] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.018571] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 7.031941] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 7.032230] tegra-se-nvhost 15810000.se: initialized [ 7.052517] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 7.052595] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.054202] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 7.060946] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.076601] tegra-se-nvhost 15820000.se: initialized [ 7.076913] tegradc 15200000.display: probed [ 7.081585] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.084912] mmc0: Command Queue Engine enabled [ 7.090673] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.094039] mmc0: periodic cache flush enabled [ 7.094059] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.101411] tegra-se-nvhost 15830000.se: initialized [ 7.105769] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.112968] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.116432] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.121730] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.138457] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.141223] tegra-se-nvhost 15840000.se: initialized [ 7.154011] Console: switching to colour frame buffer device 240x67 [ 7.155552] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.159507] tegradc 15200000.display: fb registered [ 7.164891] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.164898] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.164902] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.164907] usb 1-2: Manufacturer: Generic [ 7.166872] hub 1-2:1.0: USB hub found [ 7.167333] tegra_actmon d230000.actmon: in actmon_register()... [ 7.167497] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.167882] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.168509] hvc_sysfs: hypervisor is not present [ 7.170942] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.180418] hub 1-2:1.0: 4 ports detected [ 7.197676] ALSA device list: [ 7.200639] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.204738] No soundcards found. [ 7.210552] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.283893] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.320001] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.320872] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.321124] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.321320] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.321510] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.321514] usb 2-3: Manufacturer: Generic [ 7.321772] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.322763] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.322974] Extcon AUX1(HDMI) enable [ 7.323243] tegradc 15210000.display: disp1 connected to head1->sor [ 7.324474] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.331740] tegradc 15210000.display: DT parsed successfully [ 7.331962] hub 2-3:1.0: USB hub found [ 7.337399] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.343490] hub 2-3:1.0: 4 ports detected [ 7.349453] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.359762] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.372246] tegradc 15210000.display: probed [ 7.372620] tegradc 15210000.display: fb registered [ 7.378410] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.380665] Freeing unused kernel memory: 3968K [ 7.382515] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.394773] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.400539] tegradc 15210000.display: blank - powerdown [ 7.405716] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.407267] Run /init as init process [ 7.413669] Extcon DP: HPD disabled [ 7.413677] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.420668] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.433284] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.439039] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.442464] random: crng init done [ 7.463056] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.463255] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.466310] tegradc 15200000.display: blank - powerdown [ 7.491630] Root device found: mmcblk0p1 [ 7.493657] Found dev node: /dev/mmcblk0p1 [ 7.503691] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.503697] Extcon AUX1(HDMI) disable [ 7.527053] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.527882] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.528190] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.532090] Rootfs mounted over mmcblk0p1 [ 7.541410] tegradc 15200000.display: unblank [ 7.542517] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.542710] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.548401] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.550358] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.554336] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.554341] Extcon AUX1(HDMI) enable [ 7.561483] Switching from initrd to actual rootfs [ 7.567121] tegradc 15200000.display: sync windows ret = 246 [ 7.599944] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.601611] Extcon HDMI: HPD enabled [ 7.603126] tegradc 15200000.display: hdmi: plugged [ 7.604971] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.606482] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.611483] usb 1-3: Product: Bluetooth Radio [ 7.615933] usb 1-3: Manufacturer: Realtek [ 7.619805] usb 1-3: SerialNumber: 00e04c000001 [ 7.723821] systemd[1]: System time before build time, advancing clock. [ 7.793179] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.798270] systemd[1]: Detected architecture arm64. [ 7.838613] systemd[1]: Set hostname to . [ 8.008227] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.352259] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.354107] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.360142] systemd[1]: Created slice system-modprobe.slice. [ 8.365327] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.369795] systemd[1]: Created slice User and Session Slice. [ 8.373493] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.377830] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.381471] systemd[1]: Reached target User and Group Name Lookups. [ 8.384936] systemd[1]: Reached target Slices. [ 8.388224] systemd[1]: Reached target Swap. [ 8.392400] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.396197] systemd[1]: Listening on Syslog Socket. [ 8.399891] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.403427] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.407819] systemd[1]: Listening on Journal Audit Socket. [ 8.411625] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.415627] systemd[1]: Listening on Journal Socket. [ 8.419439] systemd[1]: Listening on udev Control Socket. [ 8.423202] systemd[1]: Listening on udev Kernel Socket. [ 8.431734] systemd[1]: Mounting Huge Pages File System... [ 8.441355] systemd[1]: Mounting POSIX Message Queue File System... [ 8.451041] systemd[1]: Mounting RPC Pipe File System... [ 8.459667] systemd[1]: Mounting Kernel Debug File System... [ 8.468452] systemd[1]: Mounting Kernel Trace File System... [ 8.478489] systemd[1]: Starting Journal Service... [ 8.487450] systemd[1]: Starting Set the console keyboard layout... [ 8.495740] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.499407] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.505761] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.514421] systemd[1]: Started Nameserver information manager. [ 8.519383] systemd[1]: Reached target Network (Pre). [ 8.526385] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.528411] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.536402] systemd[1]: Starting Load Kernel Modules... [ 8.544119] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.552178] systemd[1]: Starting udev Coldplug all Devices... [ 8.563530] systemd[1]: Mounted Huge Pages File System. [ 8.567438] systemd[1]: Mounted POSIX Message Queue File System. [ 8.571109] systemd[1]: Mounted RPC Pipe File System. [ 8.574928] systemd[1]: Mounted Kernel Debug File System. [ 8.576313] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.578886] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.578894] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.578903] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.578909] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.580700] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.581172] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.582892] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.590419] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.592015] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.593480] systemd[1]: Mounted Kernel Trace File System. [ 8.600100] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.606566] systemd[1]: nvfb-udev.service: Succeeded. [ 8.611387] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.623315] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.628245] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.630441] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.645621] systemd[1]: Starting Load/Save Random Seed... [ 8.654106] systemd[1]: Starting Create System Users... [ 8.695502] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.695502] [ 8.725038] systemd[1]: Finished Load/Save Random Seed. [ 8.731872] systemd[1]: Finished Create System Users. [ 8.740487] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.749985] systemd[1]: Finished Load Kernel Modules. [ 8.754626] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.761138] systemd[1]: Mounting Kernel Configuration File System... [ 8.770527] systemd[1]: Started OP-TEE Client Supplicant. [ 8.778965] systemd[1]: Starting Apply Kernel Variables... [ 8.788956] systemd[1]: Finished Set the console keyboard layout. [ 8.793037] systemd[1]: Mounted Kernel Configuration File System. [ 8.804793] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.808683] systemd[1]: Reached target Local File Systems (Pre). [ 8.812295] systemd[1]: Reached target Local File Systems. [ 8.815473] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 10.300736] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.306882] imx219 9-0010: board setup failed [ 10.307033] imx219: probe of 9-0010 failed with error -121 [ 10.318057] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.323242] imx219 10-0010: board setup failed [ 10.326252] imx219: probe of 10-0010 failed with error -121 [ 10.342085] hot-surface-alert cooling state: 0 -> 1 [ 11.188472] using random self ethernet address [ 11.188479] using random host ethernet address [ 11.828716] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.828724] Creating 1 MTD partitions on "spi6.0": [ 11.828731] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.613973] using random self ethernet address [ 12.615569] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.806220] nvidia: loading out-of-tree module taints kernel. [ 60.048593] watchdog: watchdog0: watchdog did not stop! [ 60.523880] Trying to unregister non-registered hwtime source [ 63.587449] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.589040] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERRÝÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized pm_post initialized dbells initialized ÿä11 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.419] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.645] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.647] I> width = 720, height = 480, frequency = 26973026 [0003.651] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.745] initializing target [0003.745] calling apps_init() [0003.746] starting app kernel_boot_app [0003.747] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000939] Console: colour dummy device 80x25 [ 0.002333] printk: console [tty0] enabled [ 0.002394] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002436] pid_max: default: 32768 minimum: 301 [ 0.002722] LSM: Security Framework initializing [ 0.002782] Yama: becoming mindful. [ 0.002828] SELinux: Initializing. [ 0.003005] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003044] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006099] rcu: Hierarchical SRCU implementation. [ 0.006348] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007657] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007733] DTB Build time: Aug 10 2022 20:31:49 [ 0.012732] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.013134] Remapping and enabling EFI services. [ 0.015240] smp: Bringing up secondary CPUs ... [ 0.048370] Detected PIPT I-cache on CPU1 [ 0.048479] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.078159] Detected PIPT I-cache on CPU2 [ 0.078305] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.107899] Detected PIPT I-cache on CPU3 [ 0.108035] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.137720] Detected PIPT I-cache on CPU4 [ 0.137817] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.167520] Detected PIPT I-cache on CPU5 [ 0.167677] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.168052] smp: Brought up 1 node, 6 CPUs [ 0.168216] SMP: Total of 6 processors activated. [ 0.168238] CPU features: detected: Privileged Access Never [ 0.168251] CPU features: detected: LSE atomic instructions [ 0.168263] CPU features: detected: User Access Override [ 0.168277] CPU features: detected: 32-bit EL0 Support [ 0.168290] CPU features: detected: RAS Extension Support [ 0.168302] CPU features: detected: CRC32 instructions [ 0.168315] CPU features: detected: 32-bit EL1 Support [ 0.238654] CPU: All CPU(s) started at EL2 [ 0.245481] devtmpfs: initialized [ 0.294641] Registered cp15_barrier emulation handler [ 0.294789] Registered setend emulation handler [ 0.294817] KASLR enabled [ 0.295097] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.295120] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.296445] pinctrl core: initialized pinctrl subsystem [ 0.297488] SMBIOS 3.0.0 present. [ 0.297517] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.298093] NET: Registered protocol family 16 [ 0.299964] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.300464] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.301162] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.301216] audit: initializing netlink subsys (disabled) [ 0.301474] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.301879] thermal_sys: Registered thermal governor 'step_wise' [ 0.301886] thermal_sys: Registered thermal governor 'power_allocator' [ 0.301901] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.304167] cpuidle: using governor menu [ 0.304594] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.305018] ASID allocator initialised with 32768 entries [ 0.305268] Serial: AMBA PL011 UART driver [ 0.308847] Tegra reboot handler registered. [ 0.385259] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.385382] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.385550] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.385598] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.385719] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.385765] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.385880] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.385930] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.386048] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.386093] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.388407] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.388443] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.388473] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.388504] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.388548] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.388582] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.388612] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.388639] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.388666] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.388693] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.388718] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.388743] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.388797] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.388823] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.388864] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.388889] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.388916] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.389005] mc-err: mcerr ops are set to t19x [ 0.402499] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.402523] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.402535] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.402546] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.409173] ACPI: Interpreter disabled. [ 0.410394] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.411725] iommu: Default domain type: Translated [ 0.411799] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.412200] SCSI subsystem initialized [ 0.412384] usbcore: registered new interface driver usbfs [ 0.412435] usbcore: registered new interface driver hub [ 0.412471] usbcore: registered new device driver usb [ 0.412924] mc: Linux media interface: v0.10 [ 0.412955] videodev: Linux video capture interface: v2.00 [ 0.413342] pps_core: LinuxPPS API ver. 1 registered [ 0.413354] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.413375] PTP clock support registered [ 0.413595] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.413915] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.414012] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.414636] Registered efivars operations [ 0.420542] FPGA manager framework [ 0.420646] Advanced Linux Sound Architecture Driver Initialized. [ 0.421332] Bluetooth: Core ver 2.22 [ 0.421370] NET: Registered protocol family 31 [ 0.421381] Bluetooth: HCI device and connection manager initialized [ 0.421417] Bluetooth: HCI socket layer initialized [ 0.421433] Bluetooth: L2CAP socket layer initialized [ 0.421454] Bluetooth: SCO socket layer initialized [ 0.423158] camchar: rtcpu character device driver loaded [ 0.423868] clocksource: Switched to clocksource arch_sys_counter [ 0.752293] VFS: Disk quotas dquot_6.6.0 [ 0.752391] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.752739] pnp: PnP ACPI: disabled [ 0.764969] la/ptsa driver initialized. [ 0.765101] NET: Registered protocol family 2 [ 0.765311] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.770636] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.770709] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.770994] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.771426] TCP: Hash tables configured (established 65536 bind 65536) [ 0.771603] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.771716] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.771943] NET: Registered protocol family 1 [ 0.772468] RPC: Registered named UNIX socket transport module. [ 0.772481] RPC: Registered udp transport module. [ 0.772489] RPC: Registered tcp transport module. [ 0.772498] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.772521] PCI: CLS 0 bytes, default 64 [ 0.772710] Trying to unpack rootfs image as initramfs... [ 0.965239] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.967428] Freeing initrd memory: 8196K [ 0.971155] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.971186] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.971214] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.971506] kvm [1]: IPA Size Limit: 40 bits [ 0.972053] kvm [1]: vgic interrupt IRQ9 [ 0.972519] kvm [1]: VHE mode initialized successfully [ 0.973941] Initialise system trusted keyrings [ 0.974232] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.980760] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.981581] NFS: Registering the id_resolver key type [ 0.981608] Key type id_resolver registered [ 0.981618] Key type id_legacy registered [ 0.981697] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.981738] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.981765] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.993779] NET: Registered protocol family 38 [ 0.993799] Key type asymmetric registered [ 0.993808] Asymmetric key parser 'x509' registered [ 0.993869] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.994076] io scheduler mq-deadline registered [ 0.994089] io scheduler kyber registered [ 0.998583] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.000715] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.000788] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.000857] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.000924] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.000974] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.005102] scrncapt: init (heads:4 wins:6 planes:4) [ 1.005479] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.006136] EINJ: ACPI disabled. [ 1.008580] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.008599] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.008608] tegra-pmc: ### PMC reset level: L1 [ 1.008617] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.008654] tegra-pmc: PMC Prod config success [ 1.013351] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.496985] random: fast init done [ 2.563989] printk: console [ttyTCU0] enabled [ 2.569990] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.574628] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.579156] arm-smmu 10000000.iommu: stage 1 translation [ 2.584922] arm-smmu 10000000.iommu: stage 2 translation [ 2.590435] arm-smmu 10000000.iommu: nested translation [ 2.595785] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.602962] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.613223] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.616089] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.622399] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.629888] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.635691] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.640145] arm-smmu 12000000.iommu: stage 1 translation [ 2.645911] arm-smmu 12000000.iommu: stage 2 translation [ 2.651079] arm-smmu 12000000.iommu: nested translation [ 2.656507] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.663684] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.673925] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.676825] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.683626] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.690946] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.700905] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.703805] tegra_profiler: auth: init [ 2.708271] THERMAL EST: found 3 subdevs [ 2.711446] THERMAL EST num_resources: 0 [ 2.715580] [THERMAL EST subdev 0] [ 2.718887] [THERMAL EST subdev 1] [ 2.722298] [THERMAL EST subdev 2] [ 2.725292] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.731688] THERMAL EST: thz register success. [ 2.735986] THERMAL EST: end of probe, return err: 0 [ 2.741523] nvsciipc: loaded module [ 2.747852] tun: Universal TUN/TAP device driver, 1.6 [ 2.750916] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.757331] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.762926] e1000e: Intel(R) PRO/1000 Network Driver [ 2.767814] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.773935] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.779181] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.785109] PPP generic driver version 2.4.2 [ 2.789385] PPP BSD Compression module registered [ 2.794165] PPP Deflate Compression module registered [ 2.799147] PPP MPPE Compression module registered [ 2.804195] usbcore: registered new interface driver r8152 [ 2.809966] usbcore: registered new interface driver asix [ 2.815268] usbcore: registered new interface driver ax88179_178a [ 2.821157] usbcore: registered new interface driver cdc_ether [ 2.827351] usbcore: registered new interface driver net1080 [ 2.832954] usbcore: registered new interface driver cdc_subset [ 2.838977] usbcore: registered new interface driver zaurus [ 2.844414] usbcore: registered new interface driver cdc_ncm [ 2.850396] usbcore: registered new interface driver aqc111 [ 2.856102] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.862111] ohci-pci: OHCI PCI platform driver [ 2.866377] ohci-platform: OHCI generic platform driver [ 2.872027] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.878313] usbcore: registered new interface driver uas [ 2.882669] usbcore: registered new interface driver usb-storage [ 2.888778] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.894573] mousedev: PS/2 mouse device common for all mice [ 2.899823] usbcore: registered new interface driver xpad [ 2.907848] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.910572] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.918091] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.924513] i2c /dev entries driver [ 2.927945] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.933946] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.939049] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.944454] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.950024] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.955578] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.960688] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.973360] device-mapper: uevent: version 1.0.3 [ 2.973814] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.980961] cpuidle: Initializing cpuidle driver [ 2.985301] sdhci: Secure Digital Host Controller Interface driver [ 2.989899] sdhci: Copyright(c) Pierre Ossman [ 2.994258] Synopsys Designware Multimedia Card Interface Driver [ 3.000148] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.006237] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.006793] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.019379] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.038852] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.048205] vdd-1v0: supplied by regulator-dummy [ 3.053591] vdd-1v8-hs: supplied by regulator-dummy [ 3.058370] vdd-1v8-ls: supplied by regulator-dummy [ 3.063181] vdd-1v8-ao: supplied by regulator-dummy [ 3.067045] vddio-ddr-1v1: supplied by regulator-dummy [ 3.071439] vdd-rtc: supplied by regulator-dummy [ 3.073141] spmic-ldo1: supplied by regulator-dummy [ 3.074367] vdd-ao-3v3: supplied by regulator-dummy [ 3.080438] vddio-emmc-3v3: supplied by regulator-dummy [ 3.086636] spmic-ldo4: supplied by regulator-dummy [ 3.087852] vdd-usb-3v3: supplied by regulator-dummy [ 3.094094] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.100225] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.105714] spmic-ldo8: supplied by vdd-1v8-ls [ 3.107136] gpio-510 (gpio_default): hogged as output/high [ 3.108464] gpio-511 (gpio_default): hogged as output/high [ 3.113330] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.251830] max77686-rtc max77620-rtc: registered as rtc0 [ 3.253138] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.253492] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.978771] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.979797] hid: raw HID events driver (C) Jiri Kosina [ 3.980440] usbcore: registered new interface driver usbhid [ 3.980583] usbhid: USB HID core driver [ 3.982307] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.983606] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.931902] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.007253] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.162 ms) ÿá[ 4.068854] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.069599] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.071000] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.072222] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.074063] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.074792] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.075442] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.077087] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.077501] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.079603] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.085329] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.091506] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.096940] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.104016] denver_knobs_init:MTS_VERSION:55637613 [ 4.115165] t19x_cache tegra-cache: probed [ 4.118071] optee: probing for conduit method. [ 4.118925] optee: revision 3.16 (65cc2218) [ 4.120153] optee: dynamic shared memory is enabled [ 4.123823] optee: initialized driver [ 4.130063] nvpmodel: initialized successfully [ 4.131411] tegra_hv: get_hvd: not initialized yet [ 4.135890] user_ivc_mempool: hypervisor not present [ 4.142374] usbcore: registered new interface driver snd-usb-audio [ 4.149319] u32 classifier [ 4.149851] input device check on [ 4.153861] Actions configured [ 4.157292] Initializing XFRM netlink socket [ 4.162273] NET: Registered protocol family 10 [ 4.169031] Segment Routing with IPv6 [ 4.169366] NET: Registered protocol family 17 [ 4.173568] NET: Registered protocol family 15 [ 4.178197] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.191967] Bluetooth: RFCOMM socket layer initialized [ 4.196417] Bluetooth: RFCOMM ver 1.11 [ 4.200437] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.205907] Bluetooth: HIDP socket layer initialized [ 4.212162] 9pnet: Installing 9P2000 support [ 4.215537] Key type dns_resolver registered [ 4.221225] registered taskstats version 1 [ 4.223721] Loading compiled-in X.509 certificates [ 4.237703] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.239983] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.251039] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.251678] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.260604] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.269053] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.384163] tegra194-pcie 14160000.pcie: Link up [ 4.387623] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.387974] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.388203] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.388441] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.388635] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.389003] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.389442] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.401583] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.402112] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.402537] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.404161] pci 0004:01:00.0: supports D1 D2 [ 4.404390] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.414657] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.415042] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.415278] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.415707] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.416189] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.416355] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.418969] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.426435] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.434688] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.445628] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.449918] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.456270] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.463374] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.472617] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.472941] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.481559] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.489930] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.592215] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.592967] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.593199] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.593391] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.593699] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.593895] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.594294] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.594734] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.609766] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.610135] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.612628] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.614072] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.616291] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.618119] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.619140] pci 0005:00:00.0: Removing from iommu group 7 [ 5.619449] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.651271] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.673981] host1x 13e10000.host1x: initialized [ 5.675710] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.676909] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.677937] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.678822] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.679850] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.680876] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.681754] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.682704] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.685423] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.692311] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.702364] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.709137] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.719184] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.726348] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.736240] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.743680] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.753471] falcon 15340000.vic: Adding to iommu group 17 [ 5.767237] falcon 15340000.vic: initialized [ 5.768417] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.773498] falcon 15380000.nvjpg: initialized [ 5.774110] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.785782] falcon 154c0000.nvenc: initialized [ 5.786396] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.797010] falcon 15a80000.nvenc1: initialized [ 5.797715] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.808500] nvdec 15480000.nvdec: initialized [ 5.809208] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.818351] nvdec 15140000.nvdec1: initialized [ 5.818992] tsec 15500000.tsec: Adding to iommu group 18 [ 5.824561] tsec 15500000.tsec: initialized [ 5.825109] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.833529] tsec 15100000.tsecb: initialized [ 5.837374] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.861612] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.873388] gpio-374 (wifi-enable): hogged as output/high [ 5.873752] gpio-431 (camera-control-output-low): hogged as output/low [ 5.874050] gpio-432 (camera-control-output-low): hogged as output/low [ 5.875829] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.877860] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.878433] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.884443] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.889963] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.895690] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.901127] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.910207] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.917139] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.928060] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.933708] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.939632] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.948161] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.957737] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.965020] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.972437] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.978702] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.988084] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.994613] pva 16000000.pva0: Adding to iommu group 22 [ 6.019990] pva 16000000.pva0: initialized [ 6.026712] pva 16800000.pva1: Adding to iommu group 23 [ 6.037927] pva 16800000.pva1: initialized [ 6.043572] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.056801] nvdla 15880000.nvdla0: initialized [ 6.058485] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.066881] nvdla 158c0000.nvdla1: initialized [ 6.069686] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.070002] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.070746] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.070977] tegradc 15200000.display: Adding to iommu group 26 [ 6.071169] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.071605] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.071796] tegradccommon 15200000.display-hub: dma mapping done [ 6.072975] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.079989] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.080260] tegradc 15210000.display: Adding to iommu group 26 [ 6.084537] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.090898] generic_infoframe_type: 0x87 [ 6.096528] tegra_cec 3960000.tegra_cec: probed [ 6.102447] tegradc 15200000.display: DT parsed successfully [ 6.107647] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.110959] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.118918] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.137668] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.137761] kfuse 3830000.kfuse: initialized [ 6.145063] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.145090] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.150712] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.172109] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.172492] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.179293] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.184393] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.197386] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.198301] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.218946] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.219954] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.223166] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.239156] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.240460] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.247711] tegradc 15210000.display: disp0 connected to head1->sor [ 6.252220] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.257945] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.274005] tegradc 15210000.display: DT parsed successfully [ 6.278544] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.279431] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.288983] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.302256] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.310364] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.319101] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.325768] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.333242] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.340359] usb usb1: Product: xHCI Host Controller [ 6.345469] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.351743] usb usb1: SerialNumber: 3610000.xhci [ 6.357312] hub 1-0:1.0: USB hub found [ 6.360130] hub 1-0:1.0: 4 ports detected [ 6.364809] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.369861] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.377178] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.385183] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.393044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.400316] usb usb2: Product: xHCI Host Controller [ 6.404963] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.411426] usb usb2: SerialNumber: 3610000.xhci [ 6.417113] hub 2-0:1.0: USB hub found [ 6.419659] hub 2-0:1.0: 4 ports detected [ 6.465324] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.471597] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.473283] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.473538] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.486970] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.488042] tegra194-cpufreq ccplex: probed with BWMGR [ 6.489417] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.490124] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.490685] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.492210] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.500329] tegra194-vi5 15c10000.vi: initialized [ 6.501752] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.501994] generic_infoframe_type: 0x87 [ 6.503256] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.504037] tegradc 15200000.display: DT parsed successfully [ 6.510417] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.515814] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.516093] mmc0: CQHCI version 5.10 [ 6.523993] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.532532] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.535230] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.541815] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.550275] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.550281] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.571976] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.578029] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.578515] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.584752] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.584760] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.590830] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.592705] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.592912] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.599946] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.606628] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.620180] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.622313] tegradc 15200000.display: probed [ 6.626139] nvethernet 2490000.ethernet: Macsec not supported [ 6.628138] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.637184] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.646504] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.677954] mmc0: Command Queue Engine enabled [ 6.685023] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.690536] mmc0: periodic cache flush enabled [ 6.690558] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.691208] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.694865] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.702185] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.708126] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.724651] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.733405] tegra-se-nvhost 15810000.se: initialized [ 6.751184] Console: switching to colour frame buffer device 240x67 [ 6.756935] tegradc 15200000.display: fb registered [ 6.761966] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.772698] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.772918] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.774027] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.780525] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.792520] tegra-se-nvhost 15820000.se: initialized [ 6.798860] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.803896] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.809852] tegra-se-nvhost 15830000.se: initialized [ 6.815327] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.819569] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.821301] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.829047] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.829058] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.836103] tegra-se-nvhost 15840000.se: initialized [ 6.842706] usb 1-2: Manufacturer: Generic [ 6.844931] hub 1-2:1.0: USB hub found [ 6.848732] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.849869] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.850969] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.850978] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.851524] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.851528] Extcon AUX1(HDMI) enable [ 6.851686] tegradc 15210000.display: disp1 connected to head1->sor [ 6.851849] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.851963] tegradc 15210000.display: DT parsed successfully [ 6.852001] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.852143] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.852150] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.853438] hub 1-2:1.0: 4 ports detected [ 6.858014] tegra_actmon d230000.actmon: in actmon_register()... [ 6.859203] tegradc 15210000.display: probed [ 6.955103] tegradc 15210000.display: fb registered [ 6.955283] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.963316] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.966078] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.972894] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.972905] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.994096] tegradc 15210000.display: blank - powerdown [ 6.994771] hvc_sysfs: hypervisor is not present [ 6.999417] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.999422] Extcon DP: HPD disabled [ 6.999426] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.999435] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.999447] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.012789] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.031417] ALSA device list: ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.046047] No soundcards found. [ 7.046129] tegradc 15200000.display: blank - powerdown [ 7.069647] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.069655] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.069659] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.069663] usb 2-3: Manufacturer: Generic [ 7.080563] hub 2-3:1.0: USB hub found [ 7.082382] hub 2-3:1.0: 4 ports detected [ 7.083629] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.083636] Extcon AUX1(HDMI) disable [ 7.103922] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.103929] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.106930] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.107767] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.121065] tegradc 15200000.display: unblank [ 7.122091] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.122273] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.128171] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.129998] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.133939] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.133943] Extcon AUX1(HDMI) enable [ 7.146753] tegradc 15200000.display: sync windows ret = 247 [ 7.185653] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.187006] Freeing unused kernel memory: 3968K [ 7.191191] Extcon HDMI: HPD enabled [ 7.195616] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.199495] tegradc 15200000.display: hdmi: plugged [ 7.199653] Run /init as init process [ 7.265329] Root device found: mmcblk0p1 [ 7.268716] Found dev node: /dev/mmcblk0p1 [ 7.305123] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.310530] Rootfs mounted over mmcblk0p1 [ 7.348547] Switching from initrd to actual rootfs [ 7.369143] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.370565] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.371900] usb 1-3: Product: Bluetooth Radio [ 7.373164] usb 1-3: Manufacturer: Realtek [ 7.374425] usb 1-3: SerialNumber: 00e04c000001 [ 7.490184] systemd[1]: System time before build time, advancing clock. [ 7.560552] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.565565] systemd[1]: Detected architecture arm64. [ 7.605912] systemd[1]: Set hostname to . [ 7.769095] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.117369] random: systemd: uninitialized urandom read (16 bytes read) [ 8.119137] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.120801] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.126386] systemd[1]: Created slice system-modprobe.slice. [ 8.130002] random: systemd: uninitialized urandom read (16 bytes read) [ 8.132641] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.135798] random: systemd: uninitialized urandom read (16 bytes read) [ 8.138442] systemd[1]: Created slice User and Session Slice. [ 8.142038] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.146316] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.149776] systemd[1]: Reached target User and Group Name Lookups. [ 8.153082] systemd[1]: Reached target Slices. [ 8.156350] systemd[1]: Reached target Swap. [ 8.160373] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.164090] systemd[1]: Listening on Syslog Socket. [ 8.167670] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.171128] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.175454] systemd[1]: Listening on Journal Audit Socket. [ 8.179142] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.183059] systemd[1]: Listening on Journal Socket. [ 8.188874] systemd[1]: Listening on udev Control Socket. [ 8.193038] systemd[1]: Listening on udev Kernel Socket. [ 8.201328] systemd[1]: Mounting Huge Pages File System... [ 8.209600] systemd[1]: Mounting POSIX Message Queue File System... [ 8.217585] systemd[1]: Mounting RPC Pipe File System... [ 8.226112] systemd[1]: Mounting Kernel Debug File System... [ 8.234989] systemd[1]: Mounting Kernel Trace File System... [ 8.245788] systemd[1]: Starting Journal Service... [ 8.255043] systemd[1]: Starting Set the console keyboard layout... [ 8.263317] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.267075] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.273510] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.281932] systemd[1]: Started Nameserver information manager. [ 8.286621] systemd[1]: Reached target Network (Pre). [ 8.294600] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.296685] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.302898] systemd[1]: Starting Load Kernel Modules... [ 8.311107] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.320153] systemd[1]: Starting udev Coldplug all Devices... [ 8.330423] systemd[1]: Mounted Huge Pages File System. [ 8.334508] systemd[1]: Mounted POSIX Message Queue File System. [ 8.338739] systemd[1]: Mounted RPC Pipe File System. [ 8.339820] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.345126] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.346708] systemd[1]: Mounted Kernel Debug File System. [ 8.348656] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.348665] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.348677] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.348681] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.348858] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.349096] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.349228] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.349235] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.376666] systemd[1]: Mounted Kernel Trace File System. [ 8.385600] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.391325] systemd[1]: nvfb-udev.service: Succeeded. [ 8.395582] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.407937] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.421009] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.422871] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.429962] systemd[1]: Starting Load/Save Random Seed... [ 8.439567] systemd[1]: Starting Create System Users... [ 8.442368] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.442368] [ 8.471076] systemd[1]: Finished Load Kernel Modules. [ 8.475547] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.483331] systemd[1]: Mounting Kernel Configuration File System... [ 8.491809] systemd[1]: Started OP-TEE Client Supplicant. [ 8.500154] systemd[1]: Starting Apply Kernel Variables... [ 8.508109] systemd[1]: Mounted Kernel Configuration File System. [ 8.520233] systemd[1]: Finished Create System Users. [ 8.529781] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.536858] systemd[1]: Finished Set the console keyboard layout. [ 9.859907] random: crng init done [ 9.861263] random: 7 urandom warning(s) missed due to ratelimiting [ 9.982534] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.991456] imx219 9-0010: board setup failed [ 9.992907] imx219: probe of 9-0010 failed with error -121 [ 10.003500] hot-surface-alert cooling state: 0 -> 1 [ 10.008823] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.020023] imx219 10-0010: board setup failed [ 10.021456] imx219: probe of 10-0010 failed with error -121 [ 10.825623] using random self ethernet address [ 10.825631] using random host ethernet address [ 11.704709] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.704718] Creating 1 MTD partitions on "spi6.0": [ 11.704729] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.267617] using random self ethernet address [ 12.272362] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.808920] nvidia: loading out-of-tree module taints kernel. [ 58.985622] watchdog: watchdog0: watchdog did not stop! [ 59.440279] Trying to unregister non-registered hwtime source [ 62.499188] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.501269] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0 ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNING:ÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.629] I> edid read success [0003.642] I> edid read success [0003.642] I> width = 640, height = 480, frequency = 25174825 [0003.642] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1280, height = 768, frequency = 79500000 [0003.643] I> width = 1360, height = 768, frequency = 85500000 [0003.643] I> width = 720, height = 480, frequency = 26973026 [0003.647] I> width = 720, height = 576, frequency = 26973026 [0003.653] I> width = 1280, height = 720, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1920, height = 1080, frequency = 148351648 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.681] I> width = 720, height = 576, frequency = 26973026 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 4096, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.727] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.740] initializing target [0003.741] calling apps_init() [0003.742] starting app kernel_boot_app [0003.743] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000090974000-0x00000000a0974000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000747] Console: colour dummy device 80x25 [ 0.002238] printk: console [tty0] enabled [ 0.002300] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002336] pid_max: default: 32768 minimum: 301 [ 0.002617] LSM: Security Framework initializing [ 0.002690] Yama: becoming mindful. [ 0.002739] SELinux: Initializing. [ 0.002926] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002974] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006110] rcu: Hierarchical SRCU implementation. [ 0.006369] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007046] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007096] DTB Build time: Aug 10 2022 20:31:49 [ 0.009799] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010053] Remapping and enabling EFI services. [ 0.012360] smp: Bringing up secondary CPUs ... [ 0.041509] Detected PIPT I-cache on CPU1 [ 0.041602] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072980] Detected PIPT I-cache on CPU2 [ 0.073134] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102770] Detected PIPT I-cache on CPU3 [ 0.102911] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132629] Detected PIPT I-cache on CPU4 [ 0.132727] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162475] Detected PIPT I-cache on CPU5 [ 0.162646] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163002] smp: Brought up 1 node, 6 CPUs [ 0.163236] SMP: Total of 6 processors activated. [ 0.163306] CPU features: detected: Privileged Access Never [ 0.163330] CPU features: detected: LSE atomic instructions [ 0.163344] CPU features: detected: User Access Override [ 0.163358] CPU features: detected: 32-bit EL0 Support [ 0.163370] CPU features: detected: RAS Extension Support [ 0.163383] CPU features: detected: CRC32 instructions [ 0.163396] CPU features: detected: 32-bit EL1 Support [ 0.231270] CPU: All CPU(s) started at EL2 [ 0.238266] devtmpfs: initialized [ 0.285551] Registered cp15_barrier emulation handler [ 0.285689] Registered setend emulation handler [ 0.285712] KASLR enabled [ 0.285988] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286012] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287409] pinctrl core: initialized pinctrl subsystem [ 0.288342] SMBIOS 3.0.0 present. [ 0.288373] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289067] NET: Registered protocol family 16 [ 0.290938] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291436] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292118] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292174] audit: initializing netlink subsys (disabled) [ 0.292398] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292850] thermal_sys: Registered thermal governor 'step_wise' [ 0.292856] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292869] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295121] cpuidle: using governor menu [ 0.295485] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295961] ASID allocator initialised with 32768 entries [ 0.296180] Serial: AMBA PL011 UART driver [ 0.299293] Tegra reboot handler registered. [ 0.372722] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.372859] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.373029] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.373074] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.373190] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.373234] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.373380] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.373425] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.373548] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.373593] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.375784] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.375823] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.375854] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.375904] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.375936] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375983] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.376028] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.376086] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.376112] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.376137] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.376165] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.376189] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.376214] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.376238] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.376264] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.376289] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.376313] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.376401] mc-err: mcerr ops are set to t19x [ 0.390286] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390318] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390340] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390352] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397919] ACPI: Interpreter disabled. [ 0.399125] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400434] iommu: Default domain type: Translated [ 0.400506] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400962] SCSI subsystem initialized [ 0.401142] usbcore: registered new interface driver usbfs [ 0.401189] usbcore: registered new interface driver hub [ 0.401226] usbcore: registered new device driver usb [ 0.401639] mc: Linux media interface: v0.10 [ 0.401678] videodev: Linux video capture interface: v2.00 [ 0.401984] pps_core: LinuxPPS API ver. 1 registered [ 0.401997] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.402019] PTP clock support registered [ 0.402265] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.402592] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.402681] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.403467] Registered efivars operations [ 0.409516] FPGA manager framework [ 0.409660] Advanced Linux Sound Architecture Driver Initialized. [ 0.410255] Bluetooth: Core ver 2.22 [ 0.410297] NET: Registered protocol family 31 [ 0.410309] Bluetooth: HCI device and connection manager initialized [ 0.410338] Bluetooth: HCI socket layer initialized [ 0.410354] Bluetooth: L2CAP socket layer initialized [ 0.410380] Bluetooth: SCO socket layer initialized [ 0.411964] camchar: rtcpu character device driver loaded [ 0.412660] clocksource: Switched to clocksource arch_sys_counter [ 0.752770] VFS: Disk quotas dquot_6.6.0 [ 0.752851] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.753242] pnp: PnP ACPI: disabled [ 0.766796] la/ptsa driver initialized. [ 0.766977] NET: Registered protocol family 2 [ 0.767152] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.771777] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.771910] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.772180] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.772638] TCP: Hash tables configured (established 65536 bind 65536) [ 0.772794] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.772896] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.773124] NET: Registered protocol family 1 [ 0.773963] RPC: Registered named UNIX socket transport module. [ 0.774007] RPC: Registered udp transport module. [ 0.774030] RPC: Registered tcp transport module. [ 0.774051] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.774110] PCI: CLS 0 bytes, default 64 [ 0.774486] Trying to unpack rootfs image as initramfs... [ 1.033427] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.036655] Freeing initrd memory: 8196K [ 1.041789] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.041862] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.041916] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.042325] kvm [1]: IPA Size Limit: 40 bits [ 1.042944] kvm [1]: vgic interrupt IRQ9 [ 1.043477] kvm [1]: VHE mode initialized successfully [ 1.045507] Initialise system trusted keyrings [ 1.045927] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.053705] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.054803] NFS: Registering the id_resolver key type [ 1.054846] Key type id_resolver registered [ 1.054867] Key type id_legacy registered [ 1.054984] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.055010] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.055050] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.065443] NET: Registered protocol family 38 [ 1.065477] Key type asymmetric registered [ 1.065526] Asymmetric key parser 'x509' registered [ 1.065605] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.065894] io scheduler mq-deadline registered [ 1.065914] io scheduler kyber registered [ 1.072364] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.075419] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.075509] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.075594] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.075675] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.075757] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.081835] scrncapt: init (heads:4 wins:6 planes:4) [ 1.082108] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.082939] EINJ: ACPI disabled. [ 1.086645] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.086672] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.086687] tegra-pmc: ### PMC reset level: L1 [ 1.086700] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.086751] tegra-pmc: PMC Prod config success [ 1.092522] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.117654] random: fast init done [ 1.121324] printk: console [ttyTCU0] enabled [ 2.650215] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.654821] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.659524] arm-smmu 10000000.iommu: stage 1 translation [ 2.665112] arm-smmu 10000000.iommu: stage 2 translation [ 2.670358] arm-smmu 10000000.iommu: nested translation [ 2.675981] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.683148] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.694929] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.695978] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.702833] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.710367] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.715601] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.720326] arm-smmu 12000000.iommu: stage 1 translation [ 2.726090] arm-smmu 12000000.iommu: stage 2 translation [ 2.731294] arm-smmu 12000000.iommu: nested translation [ 2.736944] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.744136] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.755646] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.757251] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.763554] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.771345] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.781213] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.783971] tegra_profiler: auth: init [ 2.788297] THERMAL EST: found 3 subdevs [ 2.791900] THERMAL EST num_resources: 0 [ 2.795510] [THERMAL EST subdev 0] [ 2.799065] [THERMAL EST subdev 1] [ 2.802218] [THERMAL EST subdev 2] [ 2.805725] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.812267] THERMAL EST: thz register success. [ 2.816436] THERMAL EST: end of probe, return err: 0 [ 2.821479] nvsciipc: loaded module [ 2.828778] tun: Universal TUN/TAP device driver, 1.6 [ 2.831014] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.837489] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.842788] e1000e: Intel(R) PRO/1000 Network Driver [ 2.847720] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.854085] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.859096] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.865328] PPP generic driver version 2.4.2 [ 2.869822] PPP BSD Compression module registered [ 2.874101] PPP Deflate Compression module registered [ 2.879318] PPP MPPE Compression module registered [ 2.884598] usbcore: registered new interface driver r8152 [ 2.889852] usbcore: registered new interface driver asix [ 2.895187] usbcore: registered new interface driver ax88179_178a [ 2.901300] usbcore: registered new interface driver cdc_ether [ 2.907506] usbcore: registered new interface driver net1080 [ 2.913106] usbcore: registered new interface driver cdc_subset [ 2.918940] usbcore: registered new interface driver zaurus [ 2.924592] usbcore: registered new interface driver cdc_ncm [ 2.930271] usbcore: registered new interface driver aqc111 [ 2.935909] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.942236] ohci-pci: OHCI PCI platform driver [ 2.946281] ohci-platform: OHCI generic platform driver [ 2.952155] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.958410] usbcore: registered new interface driver uas [ 2.962580] usbcore: registered new interface driver usb-storage [ 2.969023] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.974731] mousedev: PS/2 mouse device common for all mice [ 2.980007] usbcore: registered new interface driver xpad [ 2.987807] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.990751] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.998530] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.005090] i2c /dev entries driver [ 3.008414] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.014213] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.019756] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.025025] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.030324] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.035804] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.041232] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.054756] device-mapper: uevent: version 1.0.3 [ 3.055210] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.061632] cpuidle: Initializing cpuidle driver [ 3.065386] sdhci: Secure Digital Host Controller Interface driver [ 3.070069] sdhci: Copyright(c) Pierre Ossman [ 3.074437] Synopsys Designware Multimedia Card Interface Driver [ 3.080372] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.086538] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.092587] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.099881] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.122738] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.132401] vdd-1v0: supplied by regulator-dummy [ 3.137963] vdd-1v8-hs: supplied by regulator-dummy [ 3.142780] vdd-1v8-ls: supplied by regulator-dummy [ 3.147595] vdd-1v8-ao: supplied by regulator-dummy [ 3.151514] vddio-ddr-1v1: supplied by regulator-dummy [ 3.156089] vdd-rtc: supplied by regulator-dummy [ 3.157894] spmic-ldo1: supplied by regulator-dummy [ 3.159190] vdd-ao-3v3: supplied by regulator-dummy [ 3.165367] vddio-emmc-3v3: supplied by regulator-dummy [ 3.171749] spmic-ldo4: supplied by regulator-dummy [ 3.172972] vdd-usb-3v3: supplied by regulator-dummy [ 3.179148] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.185413] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.190968] spmic-ldo8: supplied by vdd-1v8-ls [ 3.192518] gpio-510 (gpio_default): hogged as output/high [ 3.193926] gpio-511 (gpio_default): hogged as output/high [ 3.196898] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.332468] max77686-rtc max77620-rtc: registered as rtc0 [ 3.333590] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.333939] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.127856] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.128881] hid: raw HID events driver (C) Jiri Kosina [ 4.129619] usbcore: registered new interface driver usbhid [ 4.129777] usbhid: USB HID core driver [ 4.131498] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.132629] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.117632] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.193121] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.299 ms) ÿá[ 4.217590] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.218136] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.219051] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.219803] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.221851] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.222529] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.223187] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.224555] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.225095] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.227006] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.234373] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.240272] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.245346] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.252559] denver_knobs_init:MTS_VERSION:55637613 [ 4.266183] t19x_cache tegra-cache: probed [ 4.270050] optee: probing for conduit method. [ 4.270878] optee: revision 3.16 (65cc2218) [ 4.271968] optee: dynamic shared memory is enabled [ 4.273258] optee: initialized driver [ 4.280251] nvpmodel: initialized successfully [ 4.280992] tegra_hv: get_hvd: not initialized yet [ 4.285118] user_ivc_mempool: hypervisor not present [ 4.290850] usbcore: registered new interface driver snd-usb-audio [ 4.297376] u32 classifier [ 4.298643] input device check on [ 4.302345] Actions configured [ 4.306307] Initializing XFRM netlink socket [ 4.311169] NET: Registered protocol family 10 [ 4.317950] Segment Routing with IPv6 [ 4.318538] NET: Registered protocol family 17 [ 4.322805] NET: Registered protocol family 15 [ 4.327079] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.340612] Bluetooth: RFCOMM socket layer initialized [ 4.345504] Bluetooth: RFCOMM ver 1.11 [ 4.349122] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.355243] Bluetooth: HIDP socket layer initialized [ 4.361108] 9pnet: Installing 9P2000 support [ 4.364368] Key type dns_resolver registered [ 4.370251] registered taskstats version 1 [ 4.372879] Loading compiled-in X.509 certificates [ 4.385289] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.388578] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.398829] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.401075] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.409585] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.417979] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.532778] tegra194-pcie 14160000.pcie: Link up [ 4.535706] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.535927] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.536073] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.536328] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.536527] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.536927] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.537382] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.549760] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.550348] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.550748] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.552223] pci 0004:01:00.0: supports D1 D2 [ 4.552418] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.561673] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.561983] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.562262] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.562611] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.562840] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.563022] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.567656] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.574714] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.583495] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.593765] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.598080] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.604151] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.610693] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.619709] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.621477] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.629667] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.638113] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.753267] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.753912] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.754109] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.754279] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.754559] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.754749] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.755184] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.755598] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.772008] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.772327] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.774145] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.775353] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.777104] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.778532] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.779367] pci 0005:00:00.0: Removing from iommu group 7 [ 5.779639] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.809678] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.831276] host1x 13e10000.host1x: initialized [ 5.832876] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.833835] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.834854] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.835542] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.836536] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.837219] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.838176] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.838706] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.846458] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.853449] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.863448] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.870262] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.880209] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.887363] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.897409] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.904117] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.914008] falcon 15340000.vic: Adding to iommu group 17 [ 5.928523] falcon 15340000.vic: initialized [ 5.929453] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.934856] falcon 15380000.nvjpg: initialized [ 5.935488] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.947261] falcon 154c0000.nvenc: initialized [ 5.947824] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.957599] falcon 15a80000.nvenc1: initialized [ 5.958214] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.970424] nvdec 15480000.nvdec: initialized [ 5.970991] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.979902] nvdec 15140000.nvdec1: initialized [ 5.980379] tsec 15500000.tsec: Adding to iommu group 18 [ 5.986228] tsec 15500000.tsec: initialized [ 5.986721] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.994555] tsec 15100000.tsecb: initialized [ 5.997940] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.022928] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.034484] gpio-374 (wifi-enable): hogged as output/high [ 6.034764] gpio-431 (camera-control-output-low): hogged as output/low [ 6.035020] gpio-432 (camera-control-output-low): hogged as output/low [ 6.036911] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.038528] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.039086] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.045486] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.050861] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.056742] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.062337] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.070524] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.077891] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.089601] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.094980] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.100585] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.109166] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.118490] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.126402] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.133853] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.139707] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.149500] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.155414] pva 16000000.pva0: Adding to iommu group 22 [ 6.182900] pva 16000000.pva0: initialized [ 6.187674] pva 16800000.pva1: Adding to iommu group 23 [ 6.197973] pva 16800000.pva1: initialized [ 6.202130] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.215518] nvdla 15880000.nvdla0: initialized [ 6.216783] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.225288] nvdla 158c0000.nvdla1: initialized [ 6.229019] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.229048] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.229082] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.229355] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.229675] tegradc 15200000.display: Adding to iommu group 26 [ 6.229755] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.230042] tegradccommon 15200000.display-hub: dma mapping done [ 6.231229] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.238102] tegradc 15210000.display: Adding to iommu group 26 [ 6.238172] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.238293] generic_infoframe_type: 0x87 [ 6.238385] tegradc 15200000.display: DT parsed successfully [ 6.238468] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.239529] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.242469] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.242482] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.242487] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.243326] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.243336] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.244642] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.247761] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.251051] tegra_cec 3960000.tegra_cec: probed [ 6.252152] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.257901] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.263716] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.269754] tegradc 15210000.display: disp0 connected to head1->sor [ 6.275688] kfuse 3830000.kfuse: initialized [ 6.281172] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.289679] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.297284] tegradc 15210000.display: DT parsed successfully [ 6.305288] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.311471] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.318172] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.410457] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.420514] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.425363] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.434439] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.439945] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.459946] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.460179] random: crng init done [ 6.460574] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.466386] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.475083] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.483516] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.490075] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.497861] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.505004] usb usb1: Product: xHCI Host Controller [ 6.509759] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.515864] usb usb1: SerialNumber: 3610000.xhci [ 6.521929] hub 1-0:1.0: USB hub found [ 6.524415] hub 1-0:1.0: 4 ports detected [ 6.529308] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.533988] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.541885] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.549220] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.557440] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.564690] usb usb2: Product: xHCI Host Controller [ 6.569393] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.575636] usb usb2: SerialNumber: 3610000.xhci [ 6.581389] hub 2-0:1.0: USB hub found [ 6.584030] hub 2-0:1.0: 4 ports detected [ 6.625033] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.630684] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.631866] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.632030] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.645183] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.646210] tegra194-cpufreq ccplex: probed with BWMGR [ 6.647519] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.648093] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.648512] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.649862] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.658836] mmc0: CQHCI version 5.10 [ 6.661034] tegra194-vi5 15c10000.vi: initialized [ 6.663219] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.664381] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.667924] generic_infoframe_type: 0x87 [ 6.667958] tegradc 15200000.display: DT parsed successfully [ 6.674383] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.678107] tegradc 15200000.display: Display dc.0000000062709572 registered with id=0 [ 6.683845] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.706560] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.707534] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.713093] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.721324] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.727762] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.742653] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.750498] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.750827] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.757249] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.763395] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.770016] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.770054] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.770295] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.771568] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.771574] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.773873] tegradc 15200000.display: probed [ 6.800729] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.803360] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.835427] nvethernet 2490000.ethernet: Macsec not supported [ 6.835656] Console: switching to colour frame buffer device 240x67 [ 6.836801] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.840989] tegradc 15200000.display: fb registered [ 6.841050] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.864733] mmc0: Command Queue Engine enabled [ 6.866104] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.866824] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.867044] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.870294] mmc0: periodic cache flush enabled [ 6.870310] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.876449] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.882756] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.888017] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.892582] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.900140] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.918099] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.926751] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.926755] tegra-se-nvhost 15810000.se: initialized [ 6.928275] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.928921] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.929632] tegra-se-nvhost 15820000.se: initialized [ 6.931795] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.940176] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.948505] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.953253] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.960027] tegra-se-nvhost 15830000.se: initialized [ 6.966079] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.971927] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.976316] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.976322] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.976326] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.976329] usb 1-2: Manufacturer: Generic [ 6.976622] Extcon AUX1(HDMI) enable [ 6.976791] tegradc 15210000.display: disp1 connected to head1->sor [ 6.984931] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.991063] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.999198] tegra-se-nvhost 15840000.se: initialized [ 7.003330] tegradc 15210000.display: DT parsed successfully [ 7.012303] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.016871] tegradc 15210000.display: Display dc.00000000911eab7c registered with id=1 [ 7.016888] hub 1-2:1.0: USB hub found [ 7.018098] hub 1-2:1.0: 4 ports detected [ 7.026586] tegra_actmon d230000.actmon: in actmon_register()... [ 7.032568] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.037070] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.041353] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.048154] tegradc 15210000.display: probed [ 7.051465] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.093589] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.098028] hvc_sysfs: hypervisor is not present [ 7.137940] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.153972] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.153999] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.154003] usb 2-3: Manufacturer: Generic [ 7.165080] hub 2-3:1.0: USB hub found [ 7.165519] tegradc 15210000.display: fb registered [ 7.168411] ALSA device list: [ 7.168419] No soundcards found. [ 7.171519] hub 2-3:1.0: 4 ports detected [ 7.176834] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.196062] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.196072] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.196191] tegradc 15200000.display: blank - powerdown [ 7.243916] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.243921] Extcon AUX1(HDMI) disable [ 7.256695] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.264727] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.264735] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.267262] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.268134] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.279212] tegradc 15200000.display: unblank [ 7.280303] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.280496] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.286258] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.288153] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.292315] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.292319] Extcon AUX1(HDMI) enable [ 7.304940] tegradc 15200000.display: sync windows ret = 246 [ 7.337078] tegradc 15210000.display: blank - powerdown [ 7.338648] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.338651] Extcon DP: HPD disabled [ 7.338655] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.338666] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.340228] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.342617] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.349246] Extcon HDMI: HPD enabled [ 7.349251] tegradc 15200000.display: hdmi: plugged [ 7.378866] Freeing unused kernel memory: 3968K [ 7.382645] Run /init as init process [ 7.405979] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.407503] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.409022] usb 1-3: Product: Bluetooth Radio [ 7.410397] usb 1-3: Manufacturer: Realtek [ 7.411753] usb 1-3: SerialNumber: 00e04c000001 [ 7.441561] Root device found: mmcblk0p1 [ 7.445026] Found dev node: /dev/mmcblk0p1 [ 7.480979] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.486274] Rootfs mounted over mmcblk0p1 [ 7.516289] Switching from initrd to actual rootfs [ 7.659033] systemd[1]: System time before build time, advancing clock. [ 7.730082] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.734945] systemd[1]: Detected architecture arm64. [ 7.779788] systemd[1]: Set hostname to . [ 7.939539] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.290758] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.292573] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.298240] systemd[1]: Created slice system-modprobe.slice. [ 8.302957] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.307144] systemd[1]: Created slice User and Session Slice. [ 8.310521] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.314698] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.318013] systemd[1]: Reached target User and Group Name Lookups. [ 8.321329] systemd[1]: Reached target Slices. [ 8.324327] systemd[1]: Reached target Swap. [ 8.328294] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.331930] systemd[1]: Listening on Syslog Socket. [ 8.335430] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.338737] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.342917] systemd[1]: Listening on Journal Audit Socket. [ 8.346492] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.350228] systemd[1]: Listening on Journal Socket. [ 8.353907] systemd[1]: Listening on udev Control Socket. [ 8.357344] systemd[1]: Listening on udev Kernel Socket. [ 8.365549] systemd[1]: Mounting Huge Pages File System... [ 8.373874] systemd[1]: Mounting POSIX Message Queue File System... [ 8.381891] systemd[1]: Mounting RPC Pipe File System... [ 8.392075] systemd[1]: Mounting Kernel Debug File System... [ 8.402060] systemd[1]: Mounting Kernel Trace File System... [ 8.412100] systemd[1]: Starting Journal Service... [ 8.421110] systemd[1]: Starting Set the console keyboard layout... [ 8.429282] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.432835] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.439258] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.447235] systemd[1]: Started Nameserver information manager. [ 8.452117] systemd[1]: Reached target Network (Pre). [ 8.458572] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.460403] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.468445] systemd[1]: Starting Load Kernel Modules... [ 8.476297] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.485251] systemd[1]: Starting udev Coldplug all Devices... [ 8.494878] systemd[1]: Mounted Huge Pages File System. [ 8.498833] systemd[1]: Mounted POSIX Message Queue File System. [ 8.502563] systemd[1]: Mounted RPC Pipe File System. [ 8.506562] systemd[1]: Mounted Kernel Debug File System. [ 8.506701] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.508631] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.513532] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.515064] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.516204] systemd[1]: Mounted Kernel Trace File System. [ 8.516468] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.516475] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.520987] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.521164] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.521317] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.521326] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.537794] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.548146] systemd[1]: nvfb-udev.service: Succeeded. [ 8.555071] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.565482] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.570461] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.572318] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.584012] systemd[1]: Starting Load/Save Random Seed... [ 8.592373] systemd[1]: Starting Create System Users... [ 8.635047] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.635047] [ 8.656384] systemd[1]: Finished Load/Save Random Seed. [ 8.666622] systemd[1]: Finished Load Kernel Modules. [ 8.673614] systemd[1]: Finished Create System Users. [ 8.680036] systemd[1]: Finished Set the console keyboard layout. [ 8.684578] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.690916] systemd[1]: Mounting Kernel Configuration File System... [ 8.698777] systemd[1]: Started OP-TEE Client Supplicant. [ 8.707158] systemd[1]: Starting Apply Kernel Variables... [ 8.714711] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.725064] systemd[1]: Mounted Kernel Configuration File System. [ 9.973479] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.980052] imx219 9-0010: board setup failed [ 9.981387] imx219: probe of 9-0010 failed with error -121 [ 10.020974] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.027019] imx219 10-0010: board setup failed [ 10.028374] imx219: probe of 10-0010 failed with error -121 [ 10.122269] hot-surface-alert cooling state: 0 -> 1 [ 11.170349] using random self ethernet address [ 11.171617] using random host ethernet address [ 11.558991] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.560867] Creating 1 MTD partitions on "spi6.0": [ 11.562534] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.292590] using random self ethernet address [ 12.294333] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.823459] nvidia: loading out-of-tree module taints kernel. [ 59.134446] watchdog: watchdog0: watchdog did not stop! [ 59.597838] Trying to unregister non-registered hwtime source [ 62.660543] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.662675] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr buÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/Tÿâclk_early initialized ÿäC: Noÿâmail_early initialized ÿänÿâfuse initialized hwwdt initialized ÿä-secuÿât194_ec_get_ec_list: found 45 ecs ÿäre externalÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuratioÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿän might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.607] W> set volts not configured for 'vdd-1v0' [0003.612] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.648] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.650] I> width = 720, height = 480, frequency = 26973026 [0003.654] I> width = 720, height = 576, frequency = 26973026 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.748] calling apps_init() [0003.748] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933004K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475312K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000831] Console: colour dummy device 80x25 [ 0.002373] printk: console [tty0] enabled [ 0.002432] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002499] pid_max: default: 32768 minimum: 301 [ 0.002688] LSM: Security Framework initializing [ 0.002746] Yama: becoming mindful. [ 0.002788] SELinux: Initializing. [ 0.002992] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003031] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005965] rcu: Hierarchical SRCU implementation. [ 0.006217] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007519] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007599] DTB Build time: Aug 10 2022 20:31:49 [ 0.012025] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.012289] Remapping and enabling EFI services. [ 0.014421] smp: Bringing up secondary CPUs ... [ 0.043608] Detected PIPT I-cache on CPU1 [ 0.043668] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073325] Detected PIPT I-cache on CPU2 [ 0.073401] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103047] Detected PIPT I-cache on CPU3 [ 0.103145] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132881] Detected PIPT I-cache on CPU4 [ 0.132959] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162580] Detected PIPT I-cache on CPU5 [ 0.162646] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162944] smp: Brought up 1 node, 6 CPUs [ 0.163250] SMP: Total of 6 processors activated. [ 0.163290] CPU features: detected: Privileged Access Never [ 0.163313] CPU features: detected: LSE atomic instructions [ 0.163328] CPU features: detected: User Access Override [ 0.163357] CPU features: detected: 32-bit EL0 Support [ 0.163373] CPU features: detected: RAS Extension Support [ 0.163387] CPU features: detected: CRC32 instructions [ 0.163400] CPU features: detected: 32-bit EL1 Support [ 0.236473] CPU: All CPU(s) started at EL2 [ 0.241833] devtmpfs: initialized [ 0.293166] Registered cp15_barrier emulation handler [ 0.293321] Registered setend emulation handler [ 0.293345] KASLR enabled [ 0.293554] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.293600] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.295070] pinctrl core: initialized pinctrl subsystem [ 0.296111] SMBIOS 3.0.0 present. [ 0.296143] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.296743] NET: Registered protocol family 16 [ 0.298859] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.299371] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.300301] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.300362] audit: initializing netlink subsys (disabled) [ 0.300626] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.301066] thermal_sys: Registered thermal governor 'step_wise' [ 0.301072] thermal_sys: Registered thermal governor 'power_allocator' [ 0.301089] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.303263] cpuidle: using governor menu [ 0.303564] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.304123] ASID allocator initialised with 32768 entries [ 0.304363] Serial: AMBA PL011 UART driver [ 0.307576] Tegra reboot handler registered. [ 0.377250] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.377446] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.377674] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.377753] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.377904] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.377962] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.378118] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.378194] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.378351] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.378408] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.380723] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.380766] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.380801] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.380854] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.380897] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.380932] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.380999] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.381037] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.381081] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.381111] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.381140] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.381168] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.381196] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.381224] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.381252] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.381281] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.381309] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.381426] mc-err: mcerr ops are set to t19x [ 0.392541] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392566] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.392580] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392593] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.400699] ACPI: Interpreter disabled. [ 0.402509] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.404494] iommu: Default domain type: Translated [ 0.404617] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.405220] SCSI subsystem initialized [ 0.405448] usbcore: registered new interface driver usbfs [ 0.405547] usbcore: registered new interface driver hub [ 0.405628] usbcore: registered new device driver usb [ 0.406224] mc: Linux media interface: v0.10 [ 0.406275] videodev: Linux video capture interface: v2.00 [ 0.406673] pps_core: LinuxPPS API ver. 1 registered [ 0.406695] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.406759] PTP clock support registered [ 0.407093] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.407576] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.407676] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.408653] Registered efivars operations [ 0.417992] FPGA manager framework [ 0.418172] Advanced Linux Sound Architecture Driver Initialized. [ 0.419040] Bluetooth: Core ver 2.22 [ 0.419098] NET: Registered protocol family 31 [ 0.419120] Bluetooth: HCI device and connection manager initialized [ 0.419148] Bluetooth: HCI socket layer initialized [ 0.419172] Bluetooth: L2CAP socket layer initialized [ 0.419207] Bluetooth: SCO socket layer initialized [ 0.421249] camchar: rtcpu character device driver loaded [ 0.422317] clocksource: Switched to clocksource arch_sys_counter [ 0.839436] VFS: Disk quotas dquot_6.6.0 [ 0.839543] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.840015] pnp: PnP ACPI: disabled [ 0.852919] la/ptsa driver initialized. [ 0.853126] NET: Registered protocol family 2 [ 0.853332] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.860992] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.861208] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.861584] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.862238] TCP: Hash tables configured (established 65536 bind 65536) [ 0.862459] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.862634] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.862940] NET: Registered protocol family 1 [ 0.863834] RPC: Registered named UNIX socket transport module. [ 0.863898] RPC: Registered udp transport module. [ 0.863924] RPC: Registered tcp transport module. [ 0.863946] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.863997] PCI: CLS 0 bytes, default 64 [ 0.864287] Trying to unpack rootfs image as initramfs... [ 1.123476] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.126276] Freeing initrd memory: 8196K [ 1.130898] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.130932] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.130983] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.131318] kvm [1]: IPA Size Limit: 40 bits [ 1.131810] kvm [1]: vgic interrupt IRQ9 [ 1.132318] kvm [1]: VHE mode initialized successfully [ 1.133682] Initialise system trusted keyrings [ 1.133962] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.140414] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.141339] NFS: Registering the id_resolver key type [ 1.141376] Key type id_resolver registered [ 1.141391] Key type id_legacy registered [ 1.141484] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.141508] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.141545] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.151359] NET: Registered protocol family 38 [ 1.151381] Key type asymmetric registered [ 1.151397] Asymmetric key parser 'x509' registered [ 1.151447] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.151676] io scheduler mq-deadline registered [ 1.151696] io scheduler kyber registered [ 1.157308] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.160701] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.160788] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.160871] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.160948] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.161028] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.166743] scrncapt: init (heads:4 wins:6 planes:4) [ 1.167108] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.168076] EINJ: ACPI disabled. [ 1.171451] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.171476] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.171492] tegra-pmc: ### PMC reset level: L1 [ 1.171506] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.171592] tegra-pmc: PMC Prod config success [ 1.176521] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.181331] random: fast init done [ 1.181565] printk: console [ttyTCU0] enabled [ 2.734368] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.738491] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.743066] arm-smmu 10000000.iommu: stage 1 translation [ 2.748912] arm-smmu 10000000.iommu: stage 2 translation [ 2.754052] arm-smmu 10000000.iommu: nested translation [ 2.759655] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.766819] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.776688] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.779686] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.786507] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.794188] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.799288] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.804010] arm-smmu 12000000.iommu: stage 1 translation [ 2.809779] arm-smmu 12000000.iommu: stage 2 translation [ 2.814946] arm-smmu 12000000.iommu: nested translation [ 2.820640] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.827557] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.837494] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.840932] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.847523] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.854953] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.864344] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.867639] tegra_profiler: auth: init [ 2.871944] THERMAL EST: found 3 subdevs [ 2.875357] THERMAL EST num_resources: 0 [ 2.879438] [THERMAL EST subdev 0] [ 2.882524] [THERMAL EST subdev 1] [ 2.886146] [THERMAL EST subdev 2] [ 2.889412] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.895636] THERMAL EST: thz register success. [ 2.899853] THERMAL EST: end of probe, return err: 0 [ 2.905156] nvsciipc: loaded module [ 2.912246] tun: Universal TUN/TAP device driver, 1.6 [ 2.914912] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.921170] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.926475] e1000e: Intel(R) PRO/1000 Network Driver [ 2.931667] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.937740] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.943048] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.949288] PPP generic driver version 2.4.2 [ 2.953451] PPP BSD Compression module registered [ 2.958019] PPP Deflate Compression module registered [ 2.963266] PPP MPPE Compression module registered [ 2.968299] usbcore: registered new interface driver r8152 [ 2.973795] usbcore: registered new interface driver asix [ 2.978861] usbcore: registered new interface driver ax88179_178a [ 2.985243] usbcore: registered new interface driver cdc_ether [ 2.990935] usbcore: registered new interface driver net1080 [ 2.996792] usbcore: registered new interface driver cdc_subset [ 3.002584] usbcore: registered new interface driver zaurus [ 3.008271] usbcore: registered new interface driver cdc_ncm [ 3.013952] usbcore: registered new interface driver aqc111 [ 3.019591] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.025917] ohci-pci: OHCI PCI platform driver [ 3.030226] ohci-platform: OHCI generic platform driver [ 3.035784] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.042468] usbcore: registered new interface driver uas [ 3.046223] usbcore: registered new interface driver usb-storage [ 3.052657] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.058604] mousedev: PS/2 mouse device common for all mice [ 3.063707] usbcore: registered new interface driver xpad [ 3.071638] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.074400] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.082191] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.088542] i2c /dev entries driver [ 3.091829] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.097678] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.102944] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.108596] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.113943] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.119525] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.124876] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.138420] device-mapper: uevent: version 1.0.3 [ 3.138856] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.145085] cpuidle: Initializing cpuidle driver [ 3.149264] sdhci: Secure Digital Host Controller Interface driver [ 3.154023] sdhci: Copyright(c) Pierre Ossman [ 3.157860] Synopsys Designware Multimedia Card Interface Driver [ 3.164324] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.170365] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.171059] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.183563] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.207709] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.217744] vdd-1v0: supplied by regulator-dummy [ 3.223297] vdd-1v8-hs: supplied by regulator-dummy [ 3.228298] vdd-1v8-ls: supplied by regulator-dummy [ 3.233238] vdd-1v8-ao: supplied by regulator-dummy [ 3.237205] vddio-ddr-1v1: supplied by regulator-dummy [ 3.241786] vdd-rtc: supplied by regulator-dummy [ 3.243617] spmic-ldo1: supplied by regulator-dummy [ 3.244833] vdd-ao-3v3: supplied by regulator-dummy [ 3.251065] vddio-emmc-3v3: supplied by regulator-dummy [ 3.257343] spmic-ldo4: supplied by regulator-dummy [ 3.258613] vdd-usb-3v3: supplied by regulator-dummy [ 3.264806] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.270983] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.276614] spmic-ldo8: supplied by vdd-1v8-ls [ 3.278139] gpio-510 (gpio_default): hogged as output/high [ 3.279540] gpio-511 (gpio_default): hogged as output/high [ 3.282660] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.418567] max77686-rtc max77620-rtc: registered as rtc0 [ 3.419906] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.420242] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.257781] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.258987] hid: raw HID events driver (C) Jiri Kosina [ 4.259850] usbcore: registered new interface driver usbhid [ 4.259998] usbhid: USB HID core driver [ 4.262089] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.263598] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.279562] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.353699] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 74.945 ms) ÿá[ 4.347788] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.348372] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.349249] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.349933] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.351617] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.352242] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.352804] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.354450] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.354702] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.357780] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.364331] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.370548] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.375541] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.381744] denver_knobs_init:MTS_VERSION:55637613 [ 4.393662] t19x_cache tegra-cache: probed [ 4.396922] optee: probing for conduit method. [ 4.397859] optee: revision 3.16 (65cc2218) [ 4.398922] optee: dynamic shared memory is enabled [ 4.402928] optee: initialized driver [ 4.410984] nvpmodel: initialized successfully [ 4.411549] tegra_hv: get_hvd: not initialized yet [ 4.414904] user_ivc_mempool: hypervisor not present [ 4.421626] usbcore: registered new interface driver snd-usb-audio [ 4.427614] u32 classifier [ 4.428583] input device check on [ 4.432374] Actions configured [ 4.436287] Initializing XFRM netlink socket [ 4.441046] NET: Registered protocol family 10 [ 4.447296] Segment Routing with IPv6 [ 4.448432] NET: Registered protocol family 17 [ 4.452469] NET: Registered protocol family 15 [ 4.457200] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.470810] Bluetooth: RFCOMM socket layer initialized [ 4.475451] Bluetooth: RFCOMM ver 1.11 [ 4.479057] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.485148] Bluetooth: HIDP socket layer initialized [ 4.490875] 9pnet: Installing 9P2000 support [ 4.494284] Key type dns_resolver registered [ 4.499868] registered taskstats version 1 [ 4.503066] Loading compiled-in X.509 certificates [ 4.515907] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.519033] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.529086] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.531003] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.539301] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.548060] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.662397] tegra194-pcie 14160000.pcie: Link up [ 4.665511] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.665804] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.666014] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.666220] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.666518] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.667091] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.667708] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.681966] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.682550] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.682993] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.684555] pci 0004:01:00.0: supports D1 D2 [ 4.684808] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.696374] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.696746] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.697056] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.697549] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.697943] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.698114] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.698387] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.704344] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.713165] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.723133] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.727838] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.733724] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.740583] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.749511] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.750846] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.759607] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.767850] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.870483] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.871033] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.871219] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.871409] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.871971] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.872333] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.872868] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.873403] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.896888] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.897239] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.899274] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.900678] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.902659] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.904547] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.905545] pci 0005:00:00.0: Removing from iommu group 7 [ 5.906046] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.943076] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.968942] host1x 13e10000.host1x: initialized [ 5.970733] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.971807] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.973095] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.974004] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.975684] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.976363] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.977444] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.978042] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.979010] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.979621] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.980528] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.987622] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.997357] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.004586] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.014532] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.021380] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.031283] falcon 15340000.vic: Adding to iommu group 17 [ 6.046009] falcon 15340000.vic: initialized [ 6.046984] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.052969] falcon 15380000.nvjpg: initialized [ 6.053655] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.064144] falcon 154c0000.nvenc: initialized [ 6.064768] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.074366] falcon 15a80000.nvenc1: initialized [ 6.075107] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.088558] nvdec 15480000.nvdec: initialized [ 6.089274] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.100138] nvdec 15140000.nvdec1: initialized [ 6.100845] tsec 15500000.tsec: Adding to iommu group 18 [ 6.107171] tsec 15500000.tsec: initialized [ 6.107818] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.112790] tsec 15100000.tsecb: initialized [ 6.116849] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.145294] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.157947] gpio-374 (wifi-enable): hogged as output/high [ 6.158213] gpio-431 (camera-control-output-low): hogged as output/low [ 6.158670] gpio-432 (camera-control-output-low): hogged as output/low [ 6.160295] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.162253] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.163001] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.164651] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.168115] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.173716] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.179360] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.188010] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.195223] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.206997] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.211778] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.217752] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.226364] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.235855] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.243269] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.250573] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.256799] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.266779] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.272612] pva 16000000.pva0: Adding to iommu group 22 [ 6.301283] pva 16000000.pva0: initialized [ 6.306811] pva 16800000.pva1: Adding to iommu group 23 [ 6.318675] pva 16800000.pva1: initialized [ 6.323521] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.337502] nvdla 15880000.nvdla0: initialized [ 6.339044] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.348780] nvdla 158c0000.nvdla1: initialized [ 6.353127] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.353256] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.353468] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.353628] tegradc 15200000.display: Adding to iommu group 26 [ 6.353808] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.354859] tegradccommon 15200000.display-hub: dma mapping done [ 6.354897] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.357366] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.361644] tegradc 15210000.display: Adding to iommu group 26 [ 6.361836] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.362005] generic_infoframe_type: 0x87 [ 6.362115] tegradc 15200000.display: DT parsed successfully [ 6.362570] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.362585] tegra_cec 3960000.tegra_cec: probed [ 6.363586] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.370604] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.374708] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.379203] kfuse 3830000.kfuse: initialized [ 6.383555] random: crng init done [ 6.387725] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.390916] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.394400] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.400124] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.406784] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.415859] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.420236] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.437579] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.445961] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.453956] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.461776] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.481198] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.491821] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.494792] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.504676] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.513528] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.522182] tegradc 15210000.display: disp0 connected to head1->sor [ 6.548402] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.555116] tegradc 15210000.display: DT parsed successfully [ 6.561029] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.574458] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.578158] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.583839] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.591899] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.600700] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.607091] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.614860] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.622196] usb usb1: Product: xHCI Host Controller [ 6.626982] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.633141] usb usb1: SerialNumber: 3610000.xhci [ 6.639561] hub 1-0:1.0: USB hub found [ 6.641765] hub 1-0:1.0: 4 ports detected [ 6.646642] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.651183] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.659044] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.666747] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.674643] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.681868] usb usb2: Product: xHCI Host Controller [ 6.686599] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.692924] usb usb2: SerialNumber: 3610000.xhci [ 6.698855] hub 2-0:1.0: USB hub found [ 6.701268] hub 2-0:1.0: 4 ports detected [ 6.746638] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.752985] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.754962] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.755226] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.768348] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.769522] tegra194-cpufreq ccplex: probed with BWMGR [ 6.770965] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.771496] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.772065] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.773294] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.780862] mmc0: CQHCI version 5.10 [ 6.780945] tegra194-vi5 15c10000.vi: initialized [ 6.782543] tegradc 15210000.display: disp0 connected to head1->sor [ 6.783925] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.785301] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.791321] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.798751] tegradc 15210000.display: DT parsed successfully [ 6.806646] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.810712] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.812300] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.812400] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.818441] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.818448] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.818453] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.826384] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.834092] generic_infoframe_type: 0x87 [ 6.840750] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.847635] tegradc 15200000.display: DT parsed successfully [ 6.853883] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.855488] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.860570] tegradc 15200000.display: Display dc.00000000cd1bcfa5 registered with id=0 [ 6.871484] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.877655] nvethernet 2490000.ethernet: Macsec not supported [ 6.883087] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.891328] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.897915] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.906359] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.907145] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.907261] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.907377] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.908304] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.910004] tegra-se-nvhost 15810000.se: initialized [ 6.914620] tegradc 15200000.display: vblank syncpt # 12 for dc 0 [ 6.915398] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.915890] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.916664] tegra-se-nvhost 15820000.se: initialized [ 6.918986] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.919480] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.920135] tegra-se-nvhost 15830000.se: initialized [ 6.928195] tegradc 15200000.display: vpulse3 syncpt # 14 for dc 0 [ 6.932036] mmc0: Command Queue Engine enabled [ 6.932041] mmc0: periodic cache flush enabled [ 6.932058] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.932564] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.932722] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.936550] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.937289] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.937785] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.938523] tegra-se-nvhost 15840000.se: initialized [ 6.940420] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.941924] tegra_actmon d230000.actmon: in actmon_register()... [ 6.942092] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.942565] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.943128] hvc_sysfs: hypervisor is not present [ 6.972772] ALSA device list: [ 6.983127] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.983132] ************************************** [ 6.983134] CPU:0, Error:cbb-noc [ 6.983137] Error Logger : 0 [ 6.983146] ErrLog0 : 0x80030000 [ 6.983149] Transaction Type : RD - Read, Incrementing [ 6.983152] Error Code : SLV [ 6.983155] Error Source : Target [ 6.983178] Error Description : Target error detected by CBB slave [ 6.993154] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.993160] Packet header Lock : 0 [ 6.993163] Packet header Len1 : 3 [ 6.993165] NOC protocol version : version >= 2.7 [ 6.993168] ErrLog1 : 0x350e2a [ 6.993171] ErrLog2 : 0x0 [ 6.993174] RouteId : 0x350e2a [ 6.993177] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.993180] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.993183] TargSubRange : 7 [ 6.993186] SeqId : 0 [ 6.993189] ErrLog3 : 0x101c [ 6.993192] ErrLog4 : 0x0 [ 6.993196] Address accessed : 0x1520101c [ 6.993198] ErrLog5 : 0xa89f851 [ 6.993201] Non-Modify : 0x1 [ 6.993204] AXI ID : 0x15 [ 6.993217] Master ID : CCPLEX [ 7.023260] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8195x57005 (on 0x0mm) pclk=148350937 [ 7.023388] No soundcards found. [ 7.023440] Security Group(GRPSEC): 0x7e [ 7.023449] Cache : 0x1 -- Bufferable [ 7.244359] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.244363] FALCONSEC : 0x0 [ 7.244365] Virtual Queuing Channel(VQC): 0x0 [ 7.244370] ************************************** [ 7.244428] ------------[ cut here ]------------ [ 7.268244] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.268250] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.268254] Modules linked in: [ 7.283116] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 7.289508] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.302366] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.308408] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.312872] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.317850] sp : ffff800010003b30 [ 7.321006] x29: ffff800010003b30 x28: 0000000000000001 [ 7.326688] x27: 0000000000000005 x26: ffffb4b7eb923f58 [ 7.331855] x25: ffffb4b7ec27ce10 x24: 0000000000000001 [ 7.337280] x23: ffffb4b7ebc17000 x22: ffffb4b7ec09ea00 [ 7.342876] x21: 000000000000000f x20: ffff1f3800e66080 [ 7.348145] x19: ffffb4b7ec09ea00 x18: 0000000000000020 [ 7.353555] x17: 0000000000004000 x16: 00000000d04c93a7 [ 7.359150] x15: ffffb4b7ebf12bf0 x14: ffffffffffffffff [ 7.364669] x13: ffffb4b7ec22ade8 x12: ffffb4b7ec22aa2d [ 7.366368] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.370175] x11: 0720072007200720 x10: 0720072007200720 [ 7.376784] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.381995] x9 : ffff800010003a40 x8 : 2a2a2a2a2a2a2a2a [ 7.382007] x7 : 2a2a2a2a2a2a2a2a x6 : 000000002ade4b43 [ 7.398613] x5 : 000000000000000c x4 : 00000000fffff2c2 [ 7.403951] x3 : 00000000ffffffff x2 : ffffb4b7ea3be090 [ 7.409288] x1 : ffffb4b7ebf12680 x0 : 0000000100010101 [ 7.414367] Call trace: [ 7.417254] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.421556] __handle_irq_event_percpu+0x68/0x2a0 [ 7.426091] handle_irq_event_percpu+0x40/0xa0 [ 7.430377] handle_irq_event+0x50/0xf0 [ 7.434058] handle_fasteoi_irq+0xc0/0x170 [ 7.438342] generic_handle_irq+0x40/0x60 [ 7.442454] __handle_domain_irq+0x70/0xd0 [ 7.446397] efi_header_end+0xb0/0xf0 [ 7.450152] el1_irq+0xd0/0x180 [ 7.453045] __do_softirq+0xb4/0x3e8 [ 7.456980] irq_exit+0xc0/0xe0 [ 7.459696] __handle_domain_irq+0x74/0xd0 [ 7.463976] efi_header_end+0xb0/0xf0 [ 7.467394] el1_irq+0xd0/0x180 [ 7.470630] cpuidle_enter_state+0xb8/0x410 [ 7.474653] cpuidle_enter+0x40/0x60 [ 7.478070] call_cpuidle+0x44/0x80 [ 7.481569] do_idle+0x208/0x270 [ 7.484808] cpu_startup_entry+0x30/0x70 [ 7.488659] rest_init+0xdc/0xe8 [ 7.492093] arch_call_rest_init+0x18/0x20 [ 7.496270] start_kernel+0x514/0x54c [ 7.500140] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.506334] ---[ end trace 9c9859eb548310ff ]--- [ 7.510619] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.518402] SMP: stopping secondary CPUs [ 7.522094] Kernel Offset: 0x34b7da200000 from 0xffff800010000000 [ 7.528564] PHYS_OFFSET: 0xffffe0c900000000 [ 7.532406] CPU features: 0x8240002,03802a30 [ 7.537125] Memory Limit: none [ 7.540282] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> hdmi cable connected [0003.610] W> set volts not configured for 'vdd-1v0' [0003.616] W> set volts not configured for 'vdd-1v8-hs' [0003.617] I> retrieved tmds range from prod_list_hdmi_soc [0003.625] E> invalid display type [0003.626] E> cannot find any other nvdisp nodes [0003.643] I> edid read success [0003.655] I> edid read success [0003.656] I> width = 640, height = 480, frequency = 25174825 [0003.656] I> width = 1920, height = 1080, frequency = 148500000 [0003.656] I> width = 1280, height = 768, frequency = 79500000 [0003.657] I> width = 1360, height = 768, frequency = 85500000 [0003.657] I> width = 720, height = 480, frequency = 26973026 [0003.661] I> width = 720, height = 576, frequency = 26973026 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1280, height = 720, frequency = 74175824 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 1920, height = 1080, frequency = 148351648 [0003.689] I> width = 720, height = 480, frequency = 26973026 [0003.695] I> width = 720, height = 576, frequency = 26973026 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 3840, height = 2160, frequency = 296703296 [0003.724] I> width = 4096, height = 2160, frequency = 296703296 [0003.729] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.741] I> hdmi_enable, starting HDMI initialisation [0003.746] I> hdmi_enable, HDMI initialisation complete [0003.755] initializing target [0003.755] calling apps_init() [0003.756] starting app kernel_boot_app [0003.757] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000767] Console: colour dummy device 80x25 [ 0.002305] printk: console [tty0] enabled [ 0.002365] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002415] pid_max: default: 32768 minimum: 301 [ 0.002648] LSM: Security Framework initializing [ 0.002708] Yama: becoming mindful. [ 0.002761] SELinux: Initializing. [ 0.002957] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002997] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005929] rcu: Hierarchical SRCU implementation. [ 0.006185] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006899] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006964] DTB Build time: Aug 10 2022 20:31:49 [ 0.009809] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010111] Remapping and enabling EFI services. [ 0.012094] smp: Bringing up secondary CPUs ... [ 0.041262] Detected PIPT I-cache on CPU1 [ 0.041339] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071710] Detected PIPT I-cache on CPU2 [ 0.071788] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101413] Detected PIPT I-cache on CPU3 [ 0.101506] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131226] Detected PIPT I-cache on CPU4 [ 0.131327] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160919] Detected PIPT I-cache on CPU5 [ 0.160986] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161318] smp: Brought up 1 node, 6 CPUs [ 0.161650] SMP: Total of 6 processors activated. [ 0.161735] CPU features: detected: Privileged Access Never [ 0.161763] CPU features: detected: LSE atomic instructions [ 0.161781] CPU features: detected: User Access Override [ 0.161800] CPU features: detected: 32-bit EL0 Support [ 0.161817] CPU features: detected: RAS Extension Support [ 0.161833] CPU features: detected: CRC32 instructions [ 0.161851] CPU features: detected: 32-bit EL1 Support [ 0.231969] CPU: All CPU(s) started at EL2 [ 0.237195] devtmpfs: initialized [ 0.289534] Registered cp15_barrier emulation handler [ 0.289662] Registered setend emulation handler [ 0.289707] KASLR enabled [ 0.289965] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289997] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291122] pinctrl core: initialized pinctrl subsystem [ 0.292062] SMBIOS 3.0.0 present. [ 0.292094] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292760] NET: Registered protocol family 16 [ 0.294686] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295181] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295904] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295995] audit: initializing netlink subsys (disabled) [ 0.296328] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296684] thermal_sys: Registered thermal governor 'step_wise' [ 0.296692] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296734] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298814] cpuidle: using governor menu [ 0.299090] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299523] ASID allocator initialised with 32768 entries [ 0.299757] Serial: AMBA PL011 UART driver [ 0.302990] Tegra reboot handler registered. [ 0.369486] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.369646] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.369868] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.369921] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.370050] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.370103] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.370222] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.370274] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.370413] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.370481] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.373410] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.373460] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.373520] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.373556] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.373594] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.373629] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.373671] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.373715] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.373748] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.373780] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.373811] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.373842] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.373874] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.373905] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.373937] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.373978] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.374010] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.374129] mc-err: mcerr ops are set to t19x [ 0.386289] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.386326] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.386362] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.386380] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.393093] ACPI: Interpreter disabled. [ 0.394270] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.395677] iommu: Default domain type: Translated [ 0.395773] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.396161] SCSI subsystem initialized [ 0.396311] usbcore: registered new interface driver usbfs [ 0.396360] usbcore: registered new interface driver hub [ 0.396402] usbcore: registered new device driver usb [ 0.396901] mc: Linux media interface: v0.10 [ 0.396931] videodev: Linux video capture interface: v2.00 [ 0.397256] pps_core: LinuxPPS API ver. 1 registered [ 0.397271] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.397299] PTP clock support registered [ 0.397549] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.397929] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.398042] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.398771] Registered efivars operations [ 0.404525] FPGA manager framework [ 0.404673] Advanced Linux Sound Architecture Driver Initialized. [ 0.405297] Bluetooth: Core ver 2.22 [ 0.405349] NET: Registered protocol family 31 [ 0.405365] Bluetooth: HCI device and connection manager initialized [ 0.405386] Bluetooth: HCI socket layer initialized [ 0.405406] Bluetooth: L2CAP socket layer initialized [ 0.405433] Bluetooth: SCO socket layer initialized [ 0.407438] camchar: rtcpu character device driver loaded [ 0.408204] clocksource: Switched to clocksource arch_sys_counter [ 0.699151] VFS: Disk quotas dquot_6.6.0 [ 0.699240] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.699641] pnp: PnP ACPI: disabled [ 0.712303] la/ptsa driver initialized. [ 0.712434] NET: Registered protocol family 2 [ 0.712604] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.717981] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.718065] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.718390] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.718833] TCP: Hash tables configured (established 65536 bind 65536) [ 0.718971] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.719066] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.719320] NET: Registered protocol family 1 [ 0.720302] RPC: Registered named UNIX socket transport module. [ 0.720350] RPC: Registered udp transport module. [ 0.720374] RPC: Registered tcp transport module. [ 0.720396] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.720433] PCI: CLS 0 bytes, default 64 [ 0.720681] Trying to unpack rootfs image as initramfs... [ 0.986709] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.989819] Freeing initrd memory: 8196K [ 0.995057] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.995096] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.995159] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.995584] kvm [1]: IPA Size Limit: 40 bits [ 0.996092] kvm [1]: vgic interrupt IRQ9 [ 0.996645] kvm [1]: VHE mode initialized successfully [ 0.998191] Initialise system trusted keyrings [ 0.998554] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.005443] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.006293] NFS: Registering the id_resolver key type [ 1.006359] Key type id_resolver registered [ 1.006375] Key type id_legacy registered [ 1.006495] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.006525] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.006571] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.016670] NET: Registered protocol family 38 [ 1.016695] Key type asymmetric registered [ 1.016711] Asymmetric key parser 'x509' registered [ 1.016762] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.017025] io scheduler mq-deadline registered [ 1.017074] io scheduler kyber registered [ 1.024018] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.027698] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.027788] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.027865] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.027943] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.028019] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.035578] scrncapt: init (heads:4 wins:6 planes:4) [ 1.035940] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.037123] EINJ: ACPI disabled. [ 1.041394] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.041422] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.041439] tegra-pmc: ### PMC reset level: L1 [ 1.041454] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.041541] tegra-pmc: PMC Prod config success [ 1.047393] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.054899] random: fast init done [ 1.055654] printk: console [ttyTCU0] enabled [ 2.607307] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.611903] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.616360] arm-smmu 10000000.iommu: stage 1 translation [ 2.621600] arm-smmu 10000000.iommu: stage 2 translation [ 2.627372] arm-smmu 10000000.iommu: nested translation [ 2.632449] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.639877] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.649273] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.653012] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.659825] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.667205] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.672872] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.677586] arm-smmu 12000000.iommu: stage 1 translation [ 2.683096] arm-smmu 12000000.iommu: stage 2 translation [ 2.688263] arm-smmu 12000000.iommu: nested translation [ 2.693692] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.700882] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.710496] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.714004] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.720820] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.728234] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.738078] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.740962] tegra_profiler: auth: init [ 2.745456] THERMAL EST: found 3 subdevs [ 2.748648] THERMAL EST num_resources: 0 [ 2.752487] [THERMAL EST subdev 0] [ 2.755798] [THERMAL EST subdev 1] [ 2.759480] [THERMAL EST subdev 2] [ 2.762756] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.768903] THERMAL EST: thz register success. [ 2.773169] THERMAL EST: end of probe, return err: 0 [ 2.778389] nvsciipc: loaded module [ 2.785518] tun: Universal TUN/TAP device driver, 1.6 [ 2.788152] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.794508] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.800073] e1000e: Intel(R) PRO/1000 Network Driver [ 2.805011] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.810822] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.816360] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.822246] PPP generic driver version 2.4.2 [ 2.826815] PPP BSD Compression module registered [ 2.831102] PPP Deflate Compression module registered [ 2.836584] PPP MPPE Compression module registered [ 2.841343] usbcore: registered new interface driver r8152 [ 2.847108] usbcore: registered new interface driver asix [ 2.852430] usbcore: registered new interface driver ax88179_178a [ 2.858297] usbcore: registered new interface driver cdc_ether [ 2.864251] usbcore: registered new interface driver net1080 [ 2.870101] usbcore: registered new interface driver cdc_subset [ 2.875896] usbcore: registered new interface driver zaurus [ 2.881839] usbcore: registered new interface driver cdc_ncm [ 2.887536] usbcore: registered new interface driver aqc111 [ 2.893153] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.899240] ohci-pci: OHCI PCI platform driver [ 2.903291] ohci-platform: OHCI generic platform driver [ 2.909058] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.915539] usbcore: registered new interface driver uas [ 2.919871] usbcore: registered new interface driver usb-storage [ 2.925924] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.931629] mousedev: PS/2 mouse device common for all mice [ 2.936981] usbcore: registered new interface driver xpad [ 2.944607] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.947729] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.955279] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.962026] i2c /dev entries driver [ 2.965126] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.971256] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.976293] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.981894] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.986948] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.992680] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.998096] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.010472] device-mapper: uevent: version 1.0.3 [ 3.010897] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.018025] cpuidle: Initializing cpuidle driver [ 3.022256] sdhci: Secure Digital Host Controller Interface driver [ 3.027094] sdhci: Copyright(c) Pierre Ossman [ 3.031180] Synopsys Designware Multimedia Card Interface Driver [ 3.037356] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.043292] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.043913] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.057256] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.079437] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.088816] vdd-1v0: supplied by regulator-dummy [ 3.094374] vdd-1v8-hs: supplied by regulator-dummy [ 3.099218] vdd-1v8-ls: supplied by regulator-dummy [ 3.104172] vdd-1v8-ao: supplied by regulator-dummy [ 3.108339] vddio-ddr-1v1: supplied by regulator-dummy [ 3.112922] vdd-rtc: supplied by regulator-dummy [ 3.114749] spmic-ldo1: supplied by regulator-dummy [ 3.115999] vdd-ao-3v3: supplied by regulator-dummy [ 3.122207] vddio-emmc-3v3: supplied by regulator-dummy [ 3.128588] spmic-ldo4: supplied by regulator-dummy [ 3.129875] vdd-usb-3v3: supplied by regulator-dummy [ 3.136058] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.142373] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.147911] spmic-ldo8: supplied by vdd-1v8-ls [ 3.149474] gpio-510 (gpio_default): hogged as output/high [ 3.150891] gpio-511 (gpio_default): hogged as output/high [ 3.153774] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.289393] max77686-rtc max77620-rtc: registered as rtc0 [ 3.290475] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.290832] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.119559] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.120889] hid: raw HID events driver (C) Jiri Kosina [ 4.121568] usbcore: registered new interface driver usbhid [ 4.121703] usbhid: USB HID core driver [ 4.123502] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.124712] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.053878] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.128953] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.883 ms) ÿá[ 4.209748] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.210411] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.211576] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.212554] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.214287] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.215006] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.215652] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.217042] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.217252] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.218927] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.225799] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.232336] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.237062] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.243989] denver_knobs_init:MTS_VERSION:55637613 [ 4.256546] t19x_cache tegra-cache: probed [ 4.260173] optee: probing for conduit method. [ 4.261181] optee: revision 3.16 (65cc2218) [ 4.262429] optee: dynamic shared memory is enabled [ 4.264756] optee: initialized driver [ 4.271625] nvpmodel: initialized successfully [ 4.272365] tegra_hv: get_hvd: not initialized yet [ 4.276620] user_ivc_mempool: hypervisor not present [ 4.283124] usbcore: registered new interface driver snd-usb-audio [ 4.289609] u32 classifier [ 4.290376] input device check on [ 4.294234] Actions configured [ 4.297966] Initializing XFRM netlink socket [ 4.302917] NET: Registered protocol family 10 [ 4.310229] Segment Routing with IPv6 [ 4.310595] NET: Registered protocol family 17 [ 4.314403] NET: Registered protocol family 15 [ 4.318764] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.332770] Bluetooth: RFCOMM socket layer initialized [ 4.337015] Bluetooth: RFCOMM ver 1.11 [ 4.341102] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.346699] Bluetooth: HIDP socket layer initialized [ 4.353077] 9pnet: Installing 9P2000 support [ 4.356068] Key type dns_resolver registered [ 4.361980] registered taskstats version 1 [ 4.364617] Loading compiled-in X.509 certificates [ 4.377963] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.380452] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.391279] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.392557] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.401311] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.409476] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.524369] tegra194-pcie 14160000.pcie: Link up [ 4.527324] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.527568] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.527717] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.528038] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.528320] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.528832] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.529294] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.545492] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.546107] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.546547] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.548143] pci 0004:01:00.0: supports D1 D2 [ 4.548466] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.565272] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.565899] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.566332] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.567084] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.567580] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.568059] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.568559] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.569303] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.574925] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.585602] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.590000] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.595435] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.603334] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.611906] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.612800] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.621253] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.629749] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.745229] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.745688] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.745904] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.746131] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.746364] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.746705] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.747136] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.747609] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.770972] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.771270] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.773320] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.774569] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.776028] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.777886] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.779059] pci 0005:00:00.0: Removing from iommu group 7 [ 5.779365] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.815238] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.841839] host1x 13e10000.host1x: initialized [ 5.843707] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.844875] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.846201] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.847085] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.848593] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.849405] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.850920] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.851669] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.853523] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.854306] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.855806] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.862409] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.872171] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.879247] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.889065] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.896453] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.906225] falcon 15340000.vic: Adding to iommu group 17 [ 5.921340] falcon 15340000.vic: initialized [ 5.922467] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.928112] falcon 15380000.nvjpg: initialized [ 5.928783] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.938954] falcon 154c0000.nvenc: initialized [ 5.939611] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.949325] falcon 15a80000.nvenc1: initialized [ 5.949970] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.962184] nvdec 15480000.nvdec: initialized [ 5.962765] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.973627] nvdec 15140000.nvdec1: initialized [ 5.974160] tsec 15500000.tsec: Adding to iommu group 18 [ 5.979766] tsec 15500000.tsec: initialized [ 5.980386] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.986242] tsec 15100000.tsecb: initialized [ 5.990275] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.020134] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.033000] gpio-374 (wifi-enable): hogged as output/high [ 6.033404] gpio-431 (camera-control-output-low): hogged as output/low [ 6.033712] gpio-432 (camera-control-output-low): hogged as output/low [ 6.035262] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.037396] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.037967] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.039626] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.043072] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.048567] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.054497] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.062952] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.069751] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.081756] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.086344] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.092330] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.101104] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.110282] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.117615] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.125198] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.131695] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.141131] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.147335] pva 16000000.pva0: Adding to iommu group 22 [ 6.175651] pva 16000000.pva0: initialized [ 6.181052] pva 16800000.pva1: Adding to iommu group 23 [ 6.192699] pva 16800000.pva1: initialized [ 6.197569] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.210426] nvdla 15880000.nvdla0: initialized [ 6.212349] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.221819] nvdla 158c0000.nvdla1: initialized [ 6.227217] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.227536] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.227567] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.227825] tegradc 15200000.display: Adding to iommu group 26 [ 6.227955] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.228075] tegradccommon 15200000.display-hub: dma mapping done [ 6.229677] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.231410] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.236811] tegradc 15210000.display: Adding to iommu group 26 [ 6.237393] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.237431] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.237619] generic_infoframe_type: 0x87 [ 6.237749] tegradc 15200000.display: DT parsed successfully [ 6.237859] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.242244] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.242258] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.242264] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.243234] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.248316] tegra_cec 3960000.tegra_cec: probed [ 6.249247] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.254926] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.261613] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.267494] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.273021] kfuse 3830000.kfuse: initialized [ 6.285515] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.290140] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.298414] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.303385] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.304002] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.310713] tegradc 15210000.display: disp0 connected to head1->sor [ 6.314793] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.320353] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.328470] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.337706] tegradc 15210000.display: DT parsed successfully [ 6.342319] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.348694] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.426894] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.431697] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.452296] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.452713] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.454937] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.463690] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.471984] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.478917] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.486003] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.493302] usb usb1: Product: xHCI Host Controller [ 6.498486] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.504787] usb usb1: SerialNumber: 3610000.xhci [ 6.510170] hub 1-0:1.0: USB hub found [ 6.513457] hub 1-0:1.0: 4 ports detected [ 6.518160] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.522758] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.530114] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.538043] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.545718] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.553177] usb usb2: Product: xHCI Host Controller [ 6.558205] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.564375] usb usb2: SerialNumber: 3610000.xhci [ 6.569812] hub 2-0:1.0: USB hub found [ 6.572933] hub 2-0:1.0: 4 ports detected [ 6.617266] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.623549] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.625158] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.625400] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.638899] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.639969] tegra194-cpufreq ccplex: probed with BWMGR [ 6.641228] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.641767] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.642246] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.643379] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.648964] tegra194-vi5 15c10000.vi: initialized [ 6.650680] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.651947] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.652582] mmc0: CQHCI version 5.10 [ 6.652804] generic_infoframe_type: 0x87 [ 6.659459] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.662949] tegradc 15200000.display: DT parsed successfully [ 6.666589] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.675041] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.680497] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.681624] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.687721] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.694769] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.701598] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.704853] random: crng init done [ 6.709578] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.717665] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.718332] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.736262] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.742274] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.750318] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.756708] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.762829] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.765630] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.769429] mmc0: Command Queue Engine enabled [ 6.770267] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.770273] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.772316] tegradc 15200000.display: probed [ 6.786499] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.801152] mmc0: periodic cache flush enabled [ 6.805625] nvethernet 2490000.ethernet: Macsec not supported [ 6.813178] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.822229] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.826078] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.833071] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.836294] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.841948] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.859850] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.861326] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.896620] Console: switching to colour frame buffer device 240x67 [ 6.897300] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.902386] tegradc 15200000.display: fb registered [ 6.902451] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.910273] tegra-se-nvhost 15810000.se: initialized [ 6.914398] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.924102] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.929989] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.936841] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.949231] tegra-se-nvhost 15820000.se: initialized [ 6.955267] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.960355] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.966456] tegra-se-nvhost 15830000.se: initialized [ 6.971882] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.977416] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.983779] tegra-se-nvhost 15840000.se: initialized [ 6.990100] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.995989] tegra_actmon d230000.actmon: in actmon_register()... [ 6.996631] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.999522] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.999529] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.999533] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.999539] usb 1-2: Manufacturer: Generic [ 7.000850] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.001453] hub 1-2:1.0: USB hub found [ 7.002568] hub 1-2:1.0: 4 ports detected [ 7.010333] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.017830] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.024966] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.025800] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.030177] hvc_sysfs: hypervisor is not present [ 7.033555] Extcon AUX1(HDMI) enable [ 7.066436] ALSA device list: [ 7.070451] tegradc 15210000.display: disp1 connected to head1->sor [ 7.077557] No soundcards found. [ 7.098550] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.105982] tegradc 15210000.display: DT parsed successfully [ 7.111528] tegradc 15210000.display: Display dc.0000000003aed88f registered with id=1 [ 7.117216] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.119326] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.132953] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.146308] tegradc 15210000.display: probed [ 7.146679] tegradc 15210000.display: fb registered [ 7.151798] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.155798] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.156163] Freeing unused kernel memory: 3968K [ 7.161807] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.161815] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.161819] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.161823] usb 2-3: Manufacturer: Generic [ 7.163693] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.172000] hub 2-3:1.0: USB hub found [ 7.183936] Run /init as init process [ 7.190373] hub 2-3:1.0: 4 ports detected [ 7.209627] tegradc 15210000.display: blank - powerdown ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.214618] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.214622] Extcon DP: HPD disabled [ 7.214626] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.214639] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.214644] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.214720] tegradc 15200000.display: blank - powerdown [ 7.263722] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.263727] Extcon AUX1(HDMI) disable [ 7.264247] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.264252] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.280238] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.287073] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.287915] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.301080] tegradc 15200000.display: unblank [ 7.302120] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.302312] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.308262] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.310112] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.314164] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.314168] Extcon AUX1(HDMI) enable [ 7.326882] tegradc 15200000.display: sync windows ret = 247 [ 7.369421] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.372156] Extcon HDMI: HPD enabled [ 7.375869] tegradc 15200000.display: hdmi: plugged [ 7.415293] Root device found: mmcblk0p1 [ 7.418813] Found dev node: /dev/mmcblk0p1 [ 7.437563] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.438995] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.440431] usb 1-3: Product: Bluetooth Radio [ 7.441671] usb 1-3: Manufacturer: Realtek [ 7.442901] usb 1-3: SerialNumber: 00e04c000001 [ 7.455158] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.460663] Rootfs mounted over mmcblk0p1 [ 7.490969] Switching from initrd to actual rootfs [ 7.643893] systemd[1]: System time before build time, advancing clock. [ 7.715972] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.720989] systemd[1]: Detected architecture arm64. [ 7.761127] systemd[1]: Set hostname to . [ 7.933241] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.288310] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.290041] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.295757] systemd[1]: Created slice system-modprobe.slice. [ 8.300638] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.304869] systemd[1]: Created slice User and Session Slice. [ 8.308319] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.312608] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.315892] systemd[1]: Reached target User and Group Name Lookups. [ 8.319158] systemd[1]: Reached target Slices. [ 8.322225] systemd[1]: Reached target Swap. [ 8.326219] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.329940] systemd[1]: Listening on Syslog Socket. [ 8.333566] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.336985] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.341240] systemd[1]: Listening on Journal Audit Socket. [ 8.344847] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.348615] systemd[1]: Listening on Journal Socket. [ 8.353597] systemd[1]: Listening on udev Control Socket. [ 8.357093] systemd[1]: Listening on udev Kernel Socket. [ 8.367158] systemd[1]: Mounting Huge Pages File System... [ 8.375633] systemd[1]: Mounting POSIX Message Queue File System... [ 8.384082] systemd[1]: Mounting RPC Pipe File System... [ 8.393160] systemd[1]: Mounting Kernel Debug File System... [ 8.402385] systemd[1]: Mounting Kernel Trace File System... [ 8.415323] systemd[1]: Starting Journal Service... [ 8.427674] systemd[1]: Starting Set the console keyboard layout... [ 8.438878] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.442538] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.449218] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.458091] systemd[1]: Started Nameserver information manager. [ 8.462776] systemd[1]: Reached target Network (Pre). [ 8.470045] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.471933] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.480129] systemd[1]: Starting Load Kernel Modules... [ 8.488454] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.497005] systemd[1]: Starting udev Coldplug all Devices... [ 8.507224] systemd[1]: Mounted Huge Pages File System. [ 8.511128] systemd[1]: Mounted POSIX Message Queue File System. [ 8.515109] systemd[1]: Mounted RPC Pipe File System. [ 8.518596] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.520739] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.522288] systemd[1]: Mounted Kernel Debug File System. [ 8.523205] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.525486] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.525501] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.525506] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.525722] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.525939] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.526111] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.526121] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.538925] systemd[1]: Mounted Kernel Trace File System. [ 8.545986] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.551256] systemd[1]: nvfb-udev.service: Succeeded. [ 8.555795] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.565656] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.578457] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.580335] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.586768] systemd[1]: Starting Load/Save Random Seed... [ 8.596382] systemd[1]: Starting Create System Users... [ 8.635010] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.635010] [ 8.648999] systemd[1]: Finished Load/Save Random Seed. [ 8.665903] systemd[1]: Finished Create System Users. [ 8.673701] systemd[1]: Finished Load Kernel Modules. [ 8.678417] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.685600] systemd[1]: Mounting Kernel Configuration File System... [ 8.693966] systemd[1]: Started OP-TEE Client Supplicant. [ 8.702752] systemd[1]: Starting Apply Kernel Variables... [ 8.710946] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.722754] systemd[1]: Finished Set the console keyboard layout. [ 8.727115] systemd[1]: Mounted Kernel Configuration File System. [ 10.090863] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.097677] imx219 9-0010: board setup failed [ 10.099287] imx219: probe of 9-0010 failed with error -121 [ 10.112947] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.118414] imx219 10-0010: board setup failed [ 10.118511] imx219: probe of 10-0010 failed with error -121 [ 10.223284] hot-surface-alert cooling state: 0 -> 1 [ 11.007995] using random self ethernet address [ 11.020652] using random host ethernet address [ 11.675696] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.677046] Creating 1 MTD partitions on "spi6.0": [ 11.678304] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.602935] using random self ethernet address [ 12.604715] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.839072] nvidia: loading out-of-tree module taints kernel. [ 59.442250] watchdog: watchdog0: watchdog did not stop! [ 59.901609] Trying to unregister non-registered hwtime source [ 62.964435] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.966653] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, grÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.420] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.614] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.631] I> edid read success [0003.644] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.644] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.645] I> width = 720, height = 480, frequency = 26973026 [0003.649] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.683] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.743] initializing target [0003.744] calling apps_init() [0003.744] starting app kernel_boot_app [0003.745] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000654] Console: colour dummy device 80x25 [ 0.002008] printk: console [tty0] enabled [ 0.002069] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002105] pid_max: default: 32768 minimum: 301 [ 0.002277] LSM: Security Framework initializing [ 0.002335] Yama: becoming mindful. [ 0.002382] SELinux: Initializing. [ 0.002529] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002574] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005588] rcu: Hierarchical SRCU implementation. [ 0.005850] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006606] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006657] DTB Build time: Aug 10 2022 20:31:49 [ 0.009246] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009484] Remapping and enabling EFI services. [ 0.011911] smp: Bringing up secondary CPUs ... [ 0.041126] Detected PIPT I-cache on CPU1 [ 0.041217] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070720] Detected PIPT I-cache on CPU2 [ 0.070816] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100423] Detected PIPT I-cache on CPU3 [ 0.100521] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130065] Detected PIPT I-cache on CPU4 [ 0.130164] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.159859] Detected PIPT I-cache on CPU5 [ 0.160011] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160396] smp: Brought up 1 node, 6 CPUs [ 0.160532] SMP: Total of 6 processors activated. [ 0.160607] CPU features: detected: Privileged Access Never [ 0.160633] CPU features: detected: LSE atomic instructions [ 0.160647] CPU features: detected: User Access Override [ 0.160661] CPU features: detected: 32-bit EL0 Support [ 0.160674] CPU features: detected: RAS Extension Support [ 0.160687] CPU features: detected: CRC32 instructions [ 0.160701] CPU features: detected: 32-bit EL1 Support [ 0.230726] CPU: All CPU(s) started at EL2 [ 0.236625] devtmpfs: initialized [ 0.302150] Registered cp15_barrier emulation handler [ 0.302264] Registered setend emulation handler [ 0.302298] KASLR enabled [ 0.302575] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.302613] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.304647] pinctrl core: initialized pinctrl subsystem [ 0.305783] SMBIOS 3.0.0 present. [ 0.305870] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.306751] NET: Registered protocol family 16 [ 0.309157] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.309958] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.311287] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.311372] audit: initializing netlink subsys (disabled) [ 0.311693] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1 [ 0.312219] thermal_sys: Registered thermal governor 'step_wise' [ 0.312241] thermal_sys: Registered thermal governor 'power_allocator' [ 0.312277] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.315531] cpuidle: using governor menu [ 0.316072] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.316515] ASID allocator initialised with 32768 entries [ 0.316811] Serial: AMBA PL011 UART driver [ 0.320271] Tegra reboot handler registered. [ 0.390376] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.390489] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.390654] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.390701] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.390829] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.390874] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.391027] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.391086] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.391195] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.391239] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.393519] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.393550] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.393577] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.393602] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.393629] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.393655] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.393680] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.393704] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.393749] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.393789] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.393815] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.393856] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.393880] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.393905] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.393930] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.393954] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.393979] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.394071] mc-err: mcerr ops are set to t19x [ 0.406420] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.406444] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.406457] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.406470] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.414751] ACPI: Interpreter disabled. [ 0.416806] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.418737] iommu: Default domain type: Translated [ 0.418839] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.419417] SCSI subsystem initialized [ 0.419628] usbcore: registered new interface driver usbfs [ 0.419688] usbcore: registered new interface driver hub [ 0.419752] usbcore: registered new device driver usb [ 0.420652] mc: Linux media interface: v0.10 [ 0.420701] videodev: Linux video capture interface: v2.00 [ 0.421329] pps_core: LinuxPPS API ver. 1 registered [ 0.421346] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.421375] PTP clock support registered [ 0.421782] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.422305] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.422399] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.423603] Registered efivars operations [ 0.431423] FPGA manager framework [ 0.431601] Advanced Linux Sound Architecture Driver Initialized. [ 0.432497] Bluetooth: Core ver 2.22 [ 0.432573] NET: Registered protocol family 31 [ 0.432590] Bluetooth: HCI device and connection manager initialized [ 0.432614] Bluetooth: HCI socket layer initialized [ 0.432631] Bluetooth: L2CAP socket layer initialized [ 0.432660] Bluetooth: SCO socket layer initialized [ 0.434911] camchar: rtcpu character device driver loaded [ 0.435984] clocksource: Switched to clocksource arch_sys_counter [ 0.850457] VFS: Disk quotas dquot_6.6.0 [ 0.850548] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.851103] pnp: PnP ACPI: disabled [ 0.865448] la/ptsa driver initialized. [ 0.865595] NET: Registered protocol family 2 [ 0.865820] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.873750] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.873912] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.874302] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.874926] TCP: Hash tables configured (established 65536 bind 65536) [ 0.875079] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.875208] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.875544] NET: Registered protocol family 1 [ 0.876586] RPC: Registered named UNIX socket transport module. [ 0.876614] RPC: Registered udp transport module. [ 0.876628] RPC: Registered tcp transport module. [ 0.876642] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.876670] PCI: CLS 0 bytes, default 64 [ 0.876974] Trying to unpack rootfs image as initramfs... [ 1.147264] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.150519] Freeing initrd memory: 8196K [ 1.155441] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.155475] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.155510] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.156009] kvm [1]: IPA Size Limit: 40 bits [ 1.156590] kvm [1]: vgic interrupt IRQ9 [ 1.157142] kvm [1]: VHE mode initialized successfully [ 1.158765] Initialise system trusted keyrings [ 1.159153] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.165808] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.166746] NFS: Registering the id_resolver key type [ 1.166787] Key type id_resolver registered [ 1.166802] Key type id_legacy registered [ 1.166916] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.166940] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.166977] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.177096] NET: Registered protocol family 38 [ 1.177122] Key type asymmetric registered [ 1.177137] Asymmetric key parser 'x509' registered [ 1.177193] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.177426] io scheduler mq-deadline registered [ 1.177455] io scheduler kyber registered [ 1.182920] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.186071] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.186142] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.186208] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.186271] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.186367] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.191902] scrncapt: init (heads:4 wins:6 planes:4) [ 1.191952] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.193045] EINJ: ACPI disabled. [ 1.196482] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.196507] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.196522] tegra-pmc: ### PMC reset level: L1 [ 1.196536] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.196583] tegra-pmc: PMC Prod config success [ 1.201652] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.209679] random: fast init done [ 1.218593] printk: console [ttyTCU0] enabled [ 2.759342] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.763581] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.768172] arm-smmu 10000000.iommu: stage 1 translation [ 2.773938] arm-smmu 10000000.iommu: stage 2 translation [ 2.779113] arm-smmu 10000000.iommu: nested translation [ 2.784702] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.791621] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.801768] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.804737] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.811553] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.819064] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.824595] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.829099] arm-smmu 12000000.iommu: stage 1 translation [ 2.834830] arm-smmu 12000000.iommu: stage 2 translation [ 2.839996] arm-smmu 12000000.iommu: nested translation [ 2.845679] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.852863] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.862893] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.865724] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.872541] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.879765] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.889479] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.892974] tegra_profiler: auth: init [ 2.897212] THERMAL EST: found 3 subdevs [ 2.900637] THERMAL EST num_resources: 0 [ 2.904222] [THERMAL EST subdev 0] [ 2.907783] [THERMAL EST subdev 1] [ 2.910958] [THERMAL EST subdev 2] [ 2.914202] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.920682] THERMAL EST: thz register success. [ 2.924904] THERMAL EST: end of probe, return err: 0 [ 2.930474] nvsciipc: loaded module [ 2.937734] tun: Universal TUN/TAP device driver, 1.6 [ 2.940184] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.945961] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.951830] e1000e: Intel(R) PRO/1000 Network Driver [ 2.956726] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.962543] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.968090] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.974043] PPP generic driver version 2.4.2 [ 2.978249] PPP BSD Compression module registered [ 2.982814] PPP Deflate Compression module registered [ 2.988067] PPP MPPE Compression module registered [ 2.993329] usbcore: registered new interface driver r8152 [ 2.998583] usbcore: registered new interface driver asix [ 3.004168] usbcore: registered new interface driver ax88179_178a [ 3.010291] usbcore: registered new interface driver cdc_ether [ 3.015995] usbcore: registered new interface driver net1080 [ 3.021592] usbcore: registered new interface driver cdc_subset [ 3.027886] usbcore: registered new interface driver zaurus [ 3.033576] usbcore: registered new interface driver cdc_ncm [ 3.039254] usbcore: registered new interface driver aqc111 [ 3.044926] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.050731] ohci-pci: OHCI PCI platform driver [ 3.055295] ohci-platform: OHCI generic platform driver [ 3.060965] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.067408] usbcore: registered new interface driver uas [ 3.071571] usbcore: registered new interface driver usb-storage [ 3.077504] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.083677] mousedev: PS/2 mouse device common for all mice [ 3.088732] usbcore: registered new interface driver xpad [ 3.096439] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.099182] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.107278] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.113841] i2c /dev entries driver [ 3.117165] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.122627] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.128280] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.133665] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.138979] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.144217] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.149879] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.163422] device-mapper: uevent: version 1.0.3 [ 3.163893] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.170402] cpuidle: Initializing cpuidle driver [ 3.174360] sdhci: Secure Digital Host Controller Interface driver [ 3.179105] sdhci: Copyright(c) Pierre Ossman [ 3.183169] Synopsys Designware Multimedia Card Interface Driver [ 3.189373] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.195364] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.196271] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.208594] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.229804] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.239578] vdd-1v0: supplied by regulator-dummy [ 3.245087] vdd-1v8-hs: supplied by regulator-dummy [ 3.250052] vdd-1v8-ls: supplied by regulator-dummy [ 3.254868] vdd-1v8-ao: supplied by regulator-dummy [ 3.258840] vddio-ddr-1v1: supplied by regulator-dummy [ 3.263319] vdd-rtc: supplied by regulator-dummy [ 3.265114] spmic-ldo1: supplied by regulator-dummy [ 3.266364] vdd-ao-3v3: supplied by regulator-dummy [ 3.272516] vddio-emmc-3v3: supplied by regulator-dummy [ 3.278854] spmic-ldo4: supplied by regulator-dummy [ 3.280065] vdd-usb-3v3: supplied by regulator-dummy [ 3.286250] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.292456] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.298054] spmic-ldo8: supplied by vdd-1v8-ls [ 3.299711] gpio-510 (gpio_default): hogged as output/high [ 3.301138] gpio-511 (gpio_default): hogged as output/high [ 3.304110] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.441474] max77686-rtc max77620-rtc: registered as rtc0 [ 3.442830] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.443194] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.258707] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.259896] hid: raw HID events driver (C) Jiri Kosina [ 4.260816] usbcore: registered new interface driver usbhid [ 4.260973] usbhid: USB HID core driver [ 4.263077] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.264493] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.306983] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.381125] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.951 ms) ÿá[ 4.348544] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.349086] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.350031] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.350745] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.352449] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.353112] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.353722] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.355179] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.355431] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.358490] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.364931] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.371581] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.376289] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.381959] denver_knobs_init:MTS_VERSION:55637613 [ 4.395173] t19x_cache tegra-cache: probed [ 4.400239] optee: probing for conduit method. [ 4.401139] optee: revision 3.16 (65cc2218) [ 4.402555] optee: dynamic shared memory is enabled [ 4.404099] optee: initialized driver [ 4.410791] nvpmodel: initialized successfully [ 4.411506] tegra_hv: get_hvd: not initialized yet [ 4.415807] user_ivc_mempool: hypervisor not present [ 4.422082] usbcore: registered new interface driver snd-usb-audio [ 4.428260] u32 classifier [ 4.429515] input device check on [ 4.433267] Actions configured [ 4.437207] Initializing XFRM netlink socket [ 4.442050] NET: Registered protocol family 10 [ 4.449022] Segment Routing with IPv6 [ 4.449353] NET: Registered protocol family 17 [ 4.453456] NET: Registered protocol family 15 [ 4.458175] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.471212] Bluetooth: RFCOMM socket layer initialized [ 4.476112] Bluetooth: RFCOMM ver 1.11 [ 4.480226] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.485863] Bluetooth: HIDP socket layer initialized [ 4.491897] 9pnet: Installing 9P2000 support [ 4.495548] Key type dns_resolver registered [ 4.500760] registered taskstats version 1 [ 4.503985] Loading compiled-in X.509 certificates [ 4.516900] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.519789] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.529841] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.531616] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.540462] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.548567] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.663986] tegra194-pcie 14160000.pcie: Link up [ 4.666998] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.667216] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.667388] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.667630] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.667801] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.668286] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.668793] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.680642] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.681205] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.681709] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.683347] pci 0004:01:00.0: supports D1 D2 [ 4.683527] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.695572] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.695869] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.696345] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.696910] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.697361] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.697523] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.698559] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.706082] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.714774] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.725191] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.729708] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.735302] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.741996] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.751053] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.752480] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.761175] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.769633] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.884608] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.885137] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.885325] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.885740] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.885975] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.886172] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.886673] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.887086] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.906568] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.906793] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.908499] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.909849] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.911272] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.912812] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.913808] pci 0005:00:00.0: Removing from iommu group 7 [ 5.914053] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.951533] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.976273] host1x 13e10000.host1x: initialized [ 5.977957] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.978960] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.980469] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.981301] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.982696] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.983299] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.984661] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.985341] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.986520] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.987140] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.994646] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.001527] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.011653] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.018596] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.028470] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.035825] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.045429] falcon 15340000.vic: Adding to iommu group 17 [ 6.060771] falcon 15340000.vic: initialized [ 6.061875] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.067518] falcon 15380000.nvjpg: initialized [ 6.068143] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.078775] falcon 154c0000.nvenc: initialized [ 6.079380] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.088410] falcon 15a80000.nvenc1: initialized [ 6.089037] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.101871] nvdec 15480000.nvdec: initialized [ 6.102462] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.112750] nvdec 15140000.nvdec1: initialized [ 6.113298] tsec 15500000.tsec: Adding to iommu group 18 [ 6.119016] tsec 15500000.tsec: initialized [ 6.119503] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.126058] tsec 15100000.tsecb: initialized [ 6.130081] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.158192] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.171018] gpio-374 (wifi-enable): hogged as output/high [ 6.171317] gpio-431 (camera-control-output-low): hogged as output/low [ 6.171644] gpio-432 (camera-control-output-low): hogged as output/low [ 6.173459] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.175875] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.176455] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.178243] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.182462] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.188422] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.193585] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.202756] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.209231] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.220889] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.225838] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.231631] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.240507] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.249979] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.257211] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.264763] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.271054] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.280437] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.286939] pva 16000000.pva0: Adding to iommu group 22 [ 6.314697] pva 16000000.pva0: initialized [ 6.319640] pva 16800000.pva1: Adding to iommu group 23 [ 6.331488] pva 16800000.pva1: initialized [ 6.335696] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.357487] nvdla 15880000.nvdla0: initialized [ 6.358878] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.368301] nvdla 158c0000.nvdla1: initialized [ 6.370650] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.370948] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.371216] tegradccommon 15200000.display-hub: dma mapping done [ 6.373264] tegradc 15200000.display: Adding to iommu group 26 [ 6.381700] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.382014] generic_infoframe_type: 0x87 [ 6.382248] tegradc 15200000.display: DT parsed successfully [ 6.382512] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.384946] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.385331] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.386337] tegradc 15210000.display: Adding to iommu group 26 [ 6.389768] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.390656] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.390671] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.390677] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.391840] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.391849] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.393440] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.449306] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.453949] tegra_cec 3960000.tegra_cec: probed [ 6.454950] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.458938] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.466036] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.467531] random: crng init done [ 6.471681] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.480300] tegradc 15210000.display: disp0 connected to head1->sor [ 6.483130] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.488004] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.494130] kfuse 3830000.kfuse: initialized [ 6.500527] tegradc 15210000.display: DT parsed successfully [ 6.508300] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.512101] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.517944] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.518572] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.545366] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.554677] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.560073] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.569362] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.574628] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.595128] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.595664] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.597898] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.606075] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.615032] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.621298] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.629179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.636078] usb usb1: Product: xHCI Host Controller [ 6.641347] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.647651] usb usb1: SerialNumber: 3610000.xhci [ 6.653333] hub 1-0:1.0: USB hub found [ 6.656034] hub 1-0:1.0: 4 ports detected [ 6.660536] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.665595] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.672930] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.680792] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.688761] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.695996] usb usb2: Product: xHCI Host Controller [ 6.700729] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.707194] usb usb2: SerialNumber: 3610000.xhci [ 6.712412] hub 2-0:1.0: USB hub found [ 6.715369] hub 2-0:1.0: 4 ports detected [ 6.758739] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.764856] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.766362] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.766548] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.780094] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.781141] tegra194-cpufreq ccplex: probed with BWMGR [ 6.782323] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.782922] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.783347] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.784641] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.791640] tegra194-vi5 15c10000.vi: initialized [ 6.793013] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.793624] mmc0: CQHCI version 5.10 [ 6.794033] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.794231] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.794235] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.794242] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.794247] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.794251] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.795823] generic_infoframe_type: 0x87 [ 6.799988] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.805792] tegradc 15200000.display: DT parsed successfully [ 6.813850] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.813856] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.815399] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.820287] tegradc 15200000.display: Display dc.00000000761472d5 registered with id=0 [ 6.827019] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.839715] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.850248] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.850252] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.862514] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.869715] nvethernet 2490000.ethernet: Macsec not supported [ 6.876859] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.877037] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.886484] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.893580] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.902302] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.909394] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.919760] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.919959] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.920047] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.920181] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.921248] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.923297] ************************************** [ 6.923307] CPU:0, Error:cbb-noc [ 7.014557] Error Logger : 0 [ 7.017708] ErrLog0 : 0x80030000 [ 7.021203] Transaction Type : RD - Read, Incrementing [ 7.026458] Error Code : SLV [ 7.030127] Error Source : Target [ 7.033545] Error Description : Target error detected by CBB slave [ 7.040115] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 7.047910] Packet header Lock : 0 [ 7.051308] Packet header Len1 : 3 [ 7.054894] NOC protocol version : version >= 2.7 [ 7.059797] ErrLog1 : 0x352420 [ 7.063208] ErrLog2 : 0x0 [ 7.066096] RouteId : 0x352420 [ 7.069421] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 7.074233] Targflow : host1x_p2pm/T/host1x_p2pm [ 7.079303] TargSubRange : 18 [ 7.082539] SeqId : 0 [ 7.085355] ErrLog3 : 0x4045c [ 7.088320] ErrLog4 : 0x0 [ 7.091484] Address accessed : 0x15b4045c [ 7.095753] ErrLog5 : 0x809f851 [ 7.099165] Non-Modify : 0x1 [ 7.102320] AXI ID : 0x10 [ 7.105471] Master ID : CCPLEX [ 7.109053] Security Group(GRPSEC): 0x7e [ 7.112995] Cache : 0x1 -- Bufferable [ 7.117453] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.124295] FALCONSEC : 0x0 [ 7.127427] Virtual Queuing Channel(VQC): 0x0 [ 7.132067] ************************************** [ 7.136847] ------------[ cut here ]------------ [ 7.141604] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.147910] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.153160] Modules linked in: [ 7.156412] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 7.162783] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.175040] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.181340] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.186056] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.190776] sp : ffff800010003de0 [ 7.194193] x29: ffff800010003de0 x28: 0000000000000001 [ 7.199617] x27: 0000000000000005 x26: ffffa72a5fdf3f58 [ 7.205041] x25: ffffa72a6074ce10 x24: 0000000000000001 [ 7.210465] x23: ffffa72a600e7000 x22: ffffa72a6056ea00 [ 7.215545] x21: 000000000000000f x20: ffff5c7100eca580 [ 7.221315] x19: ffffa72a6056ea00 x18: 0000000000000010 [ 7.226483] x17: 0000000000000003 x16: 0000000000000003 [ 7.231821] x15: ffffa72a603e2bf0 x14: 0720072007200720 [ 7.237590] x13: 0720072007200720 x12: 0720072007200720 [ 7.243102] x11: 0720072007200720 x10: 0720072007200720 [ 7.248358] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.253871] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.259399] x5 : 0000000000057fa8 x4 : ffffa72a603f7968 [ 7.264808] x3 : 00000000ffffffff x2 : ffffa72a5e88e090 [ 7.270145] x1 : ffffa72a603e2680 x0 : 0000000100010001 [ 7.275483] Call trace: [ 7.277955] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.282225] __handle_irq_event_percpu+0x68/0x2a0 [ 7.286948] handle_irq_event_percpu+0x40/0xa0 [ 7.291235] handle_irq_event+0x50/0xf0 [ 7.294999] handle_fasteoi_irq+0xc0/0x170 [ 7.299041] generic_handle_irq+0x40/0x60 [ 7.303049] __handle_domain_irq+0x70/0xd0 [ 7.307506] efi_header_end+0xb0/0xf0 [ 7.311006] el1_irq+0xd0/0x180 [ 7.313982] cpuidle_enter_state+0xb8/0x410 [ 7.317922] cpuidle_enter+0x40/0x60 [ 7.321441] call_cpuidle+0x44/0x80 [ 7.324922] do_idle+0x208/0x270 [ 7.328353] cpu_startup_entry+0x30/0x70 [ 7.332099] rest_init+0xdc/0xe8 [ 7.335339] arch_call_rest_init+0x18/0x20 [ 7.339536] start_kernel+0x514/0x54c [ 7.342869] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.349080] ---[ end trace 13b73af3ae13ab76 ]--- [ 7.354054] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.361598] SMP: stopping secondary CPUs [ 7.365191] Kernel Offset: 0x272a4e6d0000 from 0xffff800010000000 [ 7.371313] PHYS_OFFSET: 0xffffa39000000000 [ 7.375414] CPU features: 0x8240002,03802a30 [ 7.379870] Memory Limit: none [ 7.383283] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.030] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.336] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.337] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.337] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.338] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.338] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.352] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuration miÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäght be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.205] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.206] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.213] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.222] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.262] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.271] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.280] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.320] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.329] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.338] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.378] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.387] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.396] GIC-SPI Target CPU: 0 [0003.399] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.429] initializing platform [0003.432] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.466] I> fixed regulator driver initialized [0003.482] I> register 'maxim' power off handle [0003.484] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.486] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.493] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.519] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.530] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.551] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.569] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.587] I> regulator 'vdd-hdmi-5v0' already enabled [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.593] I> hdmi cable connected [0003.598] W> set volts not configured for 'vdd-1v0' [0003.603] W> set volts not configured for 'vdd-1v8-hs' [0003.603] I> retrieved tmds range from prod_list_hdmi_soc [0003.609] E> invalid display type [0003.610] E> cannot find any other nvdisp nodes [0003.626] I> edid read success [0003.639] I> edid read success [0003.639] I> width = 640, height = 480, frequency = 25174825 [0003.640] I> width = 1920, height = 1080, frequency = 148500000 [0003.640] I> width = 1280, height = 768, frequency = 79500000 [0003.640] I> width = 1360, height = 768, frequency = 85500000 [0003.641] I> width = 720, height = 480, frequency = 26973026 [0003.645] I> width = 720, height = 576, frequency = 26973026 [0003.650] I> width = 1280, height = 720, frequency = 74175824 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1920, height = 1080, frequency = 148351648 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 720, height = 480, frequency = 26973026 [0003.678] I> width = 720, height = 576, frequency = 26973026 [0003.684] I> width = 3840, height = 2160, frequency = 296703296 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 4096, height = 2160, frequency = 296703296 [0003.713] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.724] I> hdmi_enable, starting HDMI initialisation [0003.729] I> hdmi_enable, HDMI initialisation complete [0003.739] initializing target [0003.739] calling apps_init() [0003.740] starting app kernel_boot_app [0003.741] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000679] Console: colour dummy device 80x25 [ 0.002180] printk: console [tty0] enabled [ 0.002248] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002285] pid_max: default: 32768 minimum: 301 [ 0.002465] LSM: Security Framework initializing [ 0.002552] Yama: becoming mindful. [ 0.002623] SELinux: Initializing. [ 0.002795] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002864] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005889] rcu: Hierarchical SRCU implementation. [ 0.006149] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006865] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006935] DTB Build time: Aug 10 2022 20:31:49 [ 0.009660] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009933] Remapping and enabling EFI services. [ 0.011944] smp: Bringing up secondary CPUs ... [ 0.041100] Detected PIPT I-cache on CPU1 [ 0.041211] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072784] Detected PIPT I-cache on CPU2 [ 0.072936] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103883] Detected PIPT I-cache on CPU3 [ 0.104058] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133833] Detected PIPT I-cache on CPU4 [ 0.133985] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163771] Detected PIPT I-cache on CPU5 [ 0.163897] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164246] smp: Brought up 1 node, 6 CPUs [ 0.164641] SMP: Total of 6 processors activated. [ 0.164665] CPU features: detected: Privileged Access Never [ 0.164687] CPU features: detected: LSE atomic instructions [ 0.164709] CPU features: detected: User Access Override [ 0.164731] CPU features: detected: 32-bit EL0 Support [ 0.164753] CPU features: detected: RAS Extension Support [ 0.164775] CPU features: detected: CRC32 instructions [ 0.164797] CPU features: detected: 32-bit EL1 Support [ 0.231836] CPU: All CPU(s) started at EL2 [ 0.238626] devtmpfs: initialized [ 0.292805] Registered cp15_barrier emulation handler [ 0.292938] Registered setend emulation handler [ 0.292979] KASLR enabled [ 0.293351] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.293379] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.294806] pinctrl core: initialized pinctrl subsystem [ 0.295981] SMBIOS 3.0.0 present. [ 0.296011] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.296713] NET: Registered protocol family 16 [ 0.298702] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.299221] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.299957] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.300026] audit: initializing netlink subsys (disabled) [ 0.300360] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.300913] thermal_sys: Registered thermal governor 'step_wise' [ 0.300920] thermal_sys: Registered thermal governor 'power_allocator' [ 0.300937] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.303486] cpuidle: using governor menu [ 0.303768] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.304229] ASID allocator initialised with 32768 entries [ 0.304532] Serial: AMBA PL011 UART driver [ 0.308019] Tegra reboot handler registered. [ 0.377912] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.378067] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.378253] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.378301] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.378431] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.378500] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.378641] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.378708] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.378871] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.378917] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.381307] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.381344] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.381375] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.381405] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.381437] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.381466] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.381507] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.381543] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.381570] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.381595] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.381620] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.381645] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.381670] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.381697] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.381723] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.381748] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.381793] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.381905] mc-err: mcerr ops are set to t19x [ 0.394355] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.394391] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.394404] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.394420] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.401060] ACPI: Interpreter disabled. [ 0.402253] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.403519] iommu: Default domain type: Translated [ 0.403609] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.404011] SCSI subsystem initialized [ 0.404166] usbcore: registered new interface driver usbfs [ 0.404214] usbcore: registered new interface driver hub [ 0.404255] usbcore: registered new device driver usb [ 0.404680] mc: Linux media interface: v0.10 [ 0.404712] videodev: Linux video capture interface: v2.00 [ 0.404998] pps_core: LinuxPPS API ver. 1 registered [ 0.405011] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.405032] PTP clock support registered [ 0.405228] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.405534] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.405620] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.406215] Registered efivars operations [ 0.411645] FPGA manager framework [ 0.411793] Advanced Linux Sound Architecture Driver Initialized. [ 0.412387] Bluetooth: Core ver 2.22 [ 0.412426] NET: Registered protocol family 31 [ 0.412438] Bluetooth: HCI device and connection manager initialized [ 0.412454] Bluetooth: HCI socket layer initialized [ 0.412472] Bluetooth: L2CAP socket layer initialized [ 0.412495] Bluetooth: SCO socket layer initialized [ 0.414839] camchar: rtcpu character device driver loaded [ 0.415802] clocksource: Switched to clocksource arch_sys_counter [ 0.818089] VFS: Disk quotas dquot_6.6.0 [ 0.818197] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.818624] pnp: PnP ACPI: disabled [ 0.832140] la/ptsa driver initialized. [ 0.832289] NET: Registered protocol family 2 [ 0.832515] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.841564] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.841729] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.842104] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.842726] TCP: Hash tables configured (established 65536 bind 65536) [ 0.842889] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.843021] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.843360] NET: Registered protocol family 1 [ 0.844298] RPC: Registered named UNIX socket transport module. [ 0.844338] RPC: Registered udp transport module. [ 0.844355] RPC: Registered tcp transport module. [ 0.844373] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.844401] PCI: CLS 0 bytes, default 64 [ 0.844713] Trying to unpack rootfs image as initramfs... [ 1.048991] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.051099] Freeing initrd memory: 8196K [ 1.054334] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.054362] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.054401] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.054694] kvm [1]: IPA Size Limit: 40 bits [ 1.055139] kvm [1]: vgic interrupt IRQ9 [ 1.055546] kvm [1]: VHE mode initialized successfully [ 1.056730] Initialise system trusted keyrings [ 1.056953] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.061532] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.062264] NFS: Registering the id_resolver key type [ 1.062292] Key type id_resolver registered [ 1.062302] Key type id_legacy registered [ 1.062384] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.062404] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.062432] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.070384] NET: Registered protocol family 38 [ 1.070407] Key type asymmetric registered [ 1.070418] Asymmetric key parser 'x509' registered [ 1.070459] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.070676] io scheduler mq-deadline registered [ 1.070690] io scheduler kyber registered [ 1.074951] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.077130] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.077188] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.077252] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.077304] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.077353] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.081415] scrncapt: init (heads:4 wins:6 planes:4) [ 1.081626] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.082557] EINJ: ACPI disabled. [ 1.085045] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.085071] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.085082] tegra-pmc: ### PMC reset level: L1 [ 1.085093] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.085151] tegra-pmc: PMC Prod config success [ 1.089211] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.572665] random: fast init done [ 2.639624] printk: console [ttyTCU0] enabled [ 2.645152] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.650035] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.654748] arm-smmu 10000000.iommu: stage 1 translation [ 2.660341] arm-smmu 10000000.iommu: stage 2 translation [ 2.665600] arm-smmu 10000000.iommu: nested translation [ 2.671194] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.678112] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.687166] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.691504] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.698317] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.705754] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.711102] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.715823] arm-smmu 12000000.iommu: stage 1 translation [ 2.721594] arm-smmu 12000000.iommu: stage 2 translation [ 2.727016] arm-smmu 12000000.iommu: nested translation [ 2.732192] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.739620] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.748663] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.752505] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.759053] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.766324] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.776345] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.779663] tegra_profiler: auth: init [ 2.783902] THERMAL EST: found 3 subdevs [ 2.787380] THERMAL EST num_resources: 0 [ 2.790989] [THERMAL EST subdev 0] [ 2.794593] [THERMAL EST subdev 1] [ 2.797980] [THERMAL EST subdev 2] [ 2.801250] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.807631] THERMAL EST: thz register success. [ 2.811917] THERMAL EST: end of probe, return err: 0 [ 2.816831] nvsciipc: loaded module [ 2.823396] tun: Universal TUN/TAP device driver, 1.6 [ 2.826368] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.832739] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.838284] e1000e: Intel(R) PRO/1000 Network Driver [ 2.843477] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.849609] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.854609] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.860763] PPP generic driver version 2.4.2 [ 2.865253] PPP BSD Compression module registered [ 2.869824] PPP Deflate Compression module registered [ 2.875074] PPP MPPE Compression module registered [ 2.879847] usbcore: registered new interface driver r8152 [ 2.885610] usbcore: registered new interface driver asix [ 2.890926] usbcore: registered new interface driver ax88179_178a [ 2.896795] usbcore: registered new interface driver cdc_ether [ 2.902740] usbcore: registered new interface driver net1080 [ 2.908341] usbcore: registered new interface driver cdc_subset [ 2.914639] usbcore: registered new interface driver zaurus [ 2.920101] usbcore: registered new interface driver cdc_ncm [ 2.926043] usbcore: registered new interface driver aqc111 [ 2.931618] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.937730] ohci-pci: OHCI PCI platform driver [ 2.942047] ohci-platform: OHCI generic platform driver [ 2.947683] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.953704] usbcore: registered new interface driver uas [ 2.958328] usbcore: registered new interface driver usb-storage [ 2.964389] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.970030] mousedev: PS/2 mouse device common for all mice [ 2.975219] usbcore: registered new interface driver xpad [ 2.983288] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.986263] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.993781] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.000484] i2c /dev entries driver [ 3.003849] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.009617] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.014975] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.020130] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.025682] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.031160] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.036327] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.048223] device-mapper: uevent: version 1.0.3 [ 3.048648] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.056795] cpuidle: Initializing cpuidle driver [ 3.060613] sdhci: Secure Digital Host Controller Interface driver [ 3.065835] sdhci: Copyright(c) Pierre Ossman [ 3.069935] Synopsys Designware Multimedia Card Interface Driver [ 3.076127] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.081862] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.082450] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.094962] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.112899] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.121422] vdd-1v0: supplied by regulator-dummy [ 3.126804] vdd-1v8-hs: supplied by regulator-dummy [ 3.131500] vdd-1v8-ls: supplied by regulator-dummy [ 3.136165] vdd-1v8-ao: supplied by regulator-dummy [ 3.139920] vddio-ddr-1v1: supplied by regulator-dummy [ 3.144164] vdd-rtc: supplied by regulator-dummy [ 3.145741] spmic-ldo1: supplied by regulator-dummy [ 3.146816] vdd-ao-3v3: supplied by regulator-dummy [ 3.152838] vddio-emmc-3v3: supplied by regulator-dummy [ 3.158931] spmic-ldo4: supplied by regulator-dummy [ 3.160050] vdd-usb-3v3: supplied by regulator-dummy [ 3.166881] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.173002] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.178433] spmic-ldo8: supplied by vdd-1v8-ls [ 3.179744] gpio-510 (gpio_default): hogged as output/high [ 3.181851] gpio-511 (gpio_default): hogged as output/high [ 3.188640] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.327242] max77686-rtc max77620-rtc: registered as rtc0 [ 3.328244] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.328541] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.019704] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.020731] hid: raw HID events driver (C) Jiri Kosina [ 4.021380] usbcore: registered new interface driver usbhid [ 4.021531] usbhid: USB HID core driver [ 4.023308] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.024413] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.042708] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.118296] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.397 ms) ÿá[ 4.109416] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.109961] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.110953] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.111579] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.113193] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.113808] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.114355] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.115473] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.115933] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.117666] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.125900] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.132461] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.136998] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.144055] denver_knobs_init:MTS_VERSION:55637613 [ 4.156293] t19x_cache tegra-cache: probed [ 4.158867] optee: probing for conduit method. [ 4.159707] optee: revision 3.16 (65cc2218) [ 4.160918] optee: dynamic shared memory is enabled [ 4.164687] optee: initialized driver [ 4.171542] nvpmodel: initialized successfully [ 4.172363] tegra_hv: get_hvd: not initialized yet [ 4.177033] user_ivc_mempool: hypervisor not present [ 4.182641] usbcore: registered new interface driver snd-usb-audio [ 4.189075] u32 classifier [ 4.190546] input device check on [ 4.194340] Actions configured [ 4.198136] Initializing XFRM netlink socket [ 4.203106] NET: Registered protocol family 10 [ 4.209154] Segment Routing with IPv6 [ 4.210412] NET: Registered protocol family 17 [ 4.214438] NET: Registered protocol family 15 [ 4.219083] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.232779] Bluetooth: RFCOMM socket layer initialized [ 4.237285] Bluetooth: RFCOMM ver 1.11 [ 4.240994] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.247167] Bluetooth: HIDP socket layer initialized [ 4.253060] 9pnet: Installing 9P2000 support [ 4.256323] Key type dns_resolver registered [ 4.262179] registered taskstats version 1 [ 4.264762] Loading compiled-in X.509 certificates [ 4.278090] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.280650] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.291235] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.292944] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.301200] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.309831] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.423889] tegra194-pcie 14160000.pcie: Link up [ 4.426739] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.426997] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.427183] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.427439] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.427656] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.428111] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.428570] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.441688] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.442118] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.442636] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.444533] pci 0004:01:00.0: supports D1 D2 [ 4.444809] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.457609] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.457966] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.458251] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.458668] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.458979] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.459269] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.459567] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.465927] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.474364] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.484978] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.489601] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.495123] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.501784] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.511264] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.512626] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.521033] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.529237] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.644817] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.645493] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.645746] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.645979] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.646304] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.646514] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.646940] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.647416] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.668322] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.668807] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.670565] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.672224] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.674103] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.675613] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.676745] pci 0005:00:00.0: Removing from iommu group 7 [ 5.677260] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.723535] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.749619] host1x 13e10000.host1x: initialized [ 5.751574] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.752758] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.754002] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.754728] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.756119] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.756845] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.757991] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.758544] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.759664] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.760310] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.761549] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.762157] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.772397] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.779004] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.788658] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.796115] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.805985] falcon 15340000.vic: Adding to iommu group 17 [ 5.820104] falcon 15340000.vic: initialized [ 5.821050] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.826077] falcon 15380000.nvjpg: initialized [ 5.826645] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.839418] falcon 154c0000.nvenc: initialized [ 5.840094] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.848170] falcon 15a80000.nvenc1: initialized [ 5.848718] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.861606] nvdec 15480000.nvdec: initialized [ 5.862301] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.872710] nvdec 15140000.nvdec1: initialized [ 5.873422] tsec 15500000.tsec: Adding to iommu group 18 [ 5.880140] tsec 15500000.tsec: initialized [ 5.880659] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.886587] tsec 15100000.tsecb: initialized [ 5.890542] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.917964] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.930029] gpio-374 (wifi-enable): hogged as output/high [ 5.930303] gpio-431 (camera-control-output-low): hogged as output/low [ 5.930681] gpio-432 (camera-control-output-low): hogged as output/low [ 5.932401] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.934351] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.934932] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.937202] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.942218] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.948446] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.953741] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.962050] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.969541] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.981001] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.985998] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.992038] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.000763] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.010244] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.017099] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.025040] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.031033] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.041050] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.046937] pva 16000000.pva0: Adding to iommu group 22 [ 6.074668] pva 16000000.pva0: initialized [ 6.079210] pva 16800000.pva1: Adding to iommu group 23 [ 6.091495] pva 16800000.pva1: initialized [ 6.095077] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.108816] nvdla 15880000.nvdla0: initialized [ 6.110885] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.120084] nvdla 158c0000.nvdla1: initialized [ 6.126701] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.126750] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.127205] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.127729] tegradc 15200000.display: Adding to iommu group 26 [ 6.127935] tegradc 15210000.display: Adding to iommu group 26 [ 6.127972] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.128091] tegradccommon 15200000.display-hub: dma mapping done [ 6.128972] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.136424] tegradc 15210000.display: disp0 connected to head1->sor [ 6.137665] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.143572] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.149140] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.156571] tegradc 15210000.display: DT parsed successfully [ 6.161728] tegra_cec 3960000.tegra_cec: probed [ 6.167277] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.173654] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.180556] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.188038] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.192338] generic_infoframe_type: 0x87 [ 6.199295] kfuse 3830000.kfuse: initialized [ 6.202548] tegradc 15200000.display: DT parsed successfully [ 6.207914] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.213123] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.219156] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.219834] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.232195] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.234963] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.239547] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.239559] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.240445] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.249481] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.256846] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.265647] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.274769] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.280500] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.288646] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.292206] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.300954] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.323603] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.323629] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.355197] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.363254] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.372032] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.378235] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.386117] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.393367] usb usb1: Product: xHCI Host Controller [ 6.398075] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.404481] usb usb1: SerialNumber: 3610000.xhci [ 6.410264] hub 1-0:1.0: USB hub found [ 6.412838] hub 1-0:1.0: 4 ports detected [ 6.417595] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.422158] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.430020] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.437634] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.445618] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.452918] usb usb2: Product: xHCI Host Controller [ 6.457822] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.464040] usb usb2: SerialNumber: 3610000.xhci [ 6.469627] hub 2-0:1.0: USB hub found [ 6.472361] hub 2-0:1.0: 4 ports detected [ 6.518509] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.525776] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.527433] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.527698] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.541304] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.542403] tegra194-cpufreq ccplex: probed with BWMGR [ 6.543629] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.544076] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.544525] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.545770] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.553681] tegra194-vi5 15c10000.vi: initialized [ 6.555127] tegradc 15210000.display: disp0 connected to head1->sor [ 6.555472] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.556487] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.559896] tegradc 15210000.display: DT parsed successfully [ 6.565932] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.571663] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.579698] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.579709] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.587658] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.593672] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.600765] mmc0: CQHCI version 5.10 [ 6.600811] generic_infoframe_type: 0x87 [ 6.607091] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.611880] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.613527] tegradc 15200000.display: DT parsed successfully [ 6.617153] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.621063] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.627914] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.634671] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.641994] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.646551] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.646556] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.646904] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.655779] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.661510] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.661688] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.675839] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.678391] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.685598] nvethernet 2490000.ethernet: Macsec not supported [ 6.693621] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.696015] tegradc 15200000.display: probed [ 6.701068] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.743561] mmc0: Command Queue Engine enabled [ 6.745769] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.751900] mmc0: periodic cache flush enabled [ 6.751916] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.752548] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.756256] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.764695] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.768953] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.785437] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.791615] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.826176] Console: switching to colour frame buffer device 240x67 [ 6.827683] tegra-se-nvhost 15810000.se: initialized [ 6.831679] tegradc 15200000.display: fb registered [ 6.841669] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.841885] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.843623] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.843630] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.843634] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.843637] usb 1-2: Manufacturer: Generic [ 6.845735] hub 1-2:1.0: USB hub found [ 6.846819] hub 1-2:1.0: 4 ports detected [ 6.848332] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.854242] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.862194] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.870058] tegra-se-nvhost 15820000.se: initialized [ 6.911265] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.916205] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.922634] tegra-se-nvhost 15830000.se: initialized [ 6.927879] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.933329] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.939727] tegra-se-nvhost 15840000.se: initialized [ 6.940780] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.945800] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.953461] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.960298] tegra_actmon d230000.actmon: in actmon_register()... [ 6.964812] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.966358] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.966991] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.972589] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.979748] Extcon AUX1(HDMI) enable [ 6.979936] tegradc 15210000.display: disp1 connected to head1->sor [ 6.987757] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.995018] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.000958] hvc_sysfs: hypervisor is not present [ 7.003994] tegradc 15210000.display: DT parsed successfully [ 7.005165] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.005172] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.005176] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.005180] usb 2-3: Manufacturer: Generic [ 7.015908] hub 2-3:1.0: USB hub found [ 7.018221] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.027161] hub 2-3:1.0: 4 ports detected [ 7.093984] ALSA device list: [ 7.094089] No soundcards found. [ 7.094121] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.094386] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.101283] tegradc 15210000.display: probed [ 7.101621] tegradc 15210000.display: fb registered [ 7.107812] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.109716] Freeing unused kernel memory: 3968K [ 7.111870] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.111881] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.129669] tegradc 15210000.display: blank - powerdown [ 7.134732] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.140032] Run /init as init process [ 7.141220] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.153181] Extcon DP: HPD disabled [ 7.153186] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.153195] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.153219] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.153229] tegradc 15200000.display: blank - powerdown [ 7.167859] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.191205] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.191209] Extcon AUX1(HDMI) disable [ 7.214650] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.215515] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.227059] tegradc 15200000.display: unblank [ 7.228192] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.228535] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.232438] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.232467] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.234473] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.236351] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.240388] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.240392] Extcon AUX1(HDMI) enable [ 7.253105] tegradc 15200000.display: sync windows ret = 247 [ 7.285728] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.289605] Extcon HDMI: HPD enabled [ 7.293189] tegradc 15200000.display: hdmi: plugged [ 7.301020] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.306839] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.314006] usb 1-3: Product: Bluetooth Radio [ 7.318206] usb 1-3: Manufacturer: Realtek [ 7.322665] usb 1-3: SerialNumber: 00e04c000001 [ 7.341431] Root device found: mmcblk0p1 [ 7.344814] Found dev node: /dev/mmcblk0p1 [ 7.382111] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.387609] Rootfs mounted over mmcblk0p1 [ 7.432620] Switching from initrd to actual rootfs [ 7.586290] systemd[1]: System time before build time, advancing clock. [ 7.657184] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.661991] systemd[1]: Detected architecture arm64. [ 7.702773] systemd[1]: Set hostname to . [ 7.874878] systemd-sysv-generator[259]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.228558] random: systemd: uninitialized urandom read (16 bytes read) [ 8.230403] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.232167] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.237963] systemd[1]: Created slice system-modprobe.slice. [ 8.241810] random: systemd: uninitialized urandom read (16 bytes read) [ 8.244657] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.248054] random: systemd: uninitialized urandom read (16 bytes read) [ 8.250690] systemd[1]: Created slice User and Session Slice. [ 8.254334] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.258610] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.262155] systemd[1]: Reached target User and Group Name Lookups. [ 8.265527] systemd[1]: Reached target Slices. [ 8.268820] systemd[1]: Reached target Swap. [ 8.273106] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.276895] systemd[1]: Listening on Syslog Socket. [ 8.280564] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.284011] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.289832] systemd[1]: Listening on Journal Audit Socket. [ 8.294895] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.298688] systemd[1]: Listening on Journal Socket. [ 8.302404] systemd[1]: Listening on udev Control Socket. [ 8.305950] systemd[1]: Listening on udev Kernel Socket. [ 8.314619] systemd[1]: Mounting Huge Pages File System... [ 8.323002] systemd[1]: Mounting POSIX Message Queue File System... [ 8.331023] systemd[1]: Mounting RPC Pipe File System... [ 8.339569] systemd[1]: Mounting Kernel Debug File System... [ 8.347967] systemd[1]: Mounting Kernel Trace File System... [ 8.357981] systemd[1]: Starting Journal Service... [ 8.367092] systemd[1]: Starting Set the console keyboard layout... [ 8.375249] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.378902] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.385252] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.393086] systemd[1]: Started Nameserver information manager. [ 8.398091] systemd[1]: Reached target Network (Pre). [ 8.405822] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.407673] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.415685] systemd[1]: Starting Load Kernel Modules... [ 8.423631] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.431416] systemd[1]: Starting udev Coldplug all Devices... [ 8.442733] systemd[1]: Mounted Huge Pages File System. [ 8.446526] systemd[1]: Mounted POSIX Message Queue File System. [ 8.450108] systemd[1]: Mounted RPC Pipe File System. [ 8.453780] systemd[1]: Mounted Kernel Debug File System. [ 8.453996] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.455410] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.458600] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.458605] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.458614] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.458618] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.460950] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.461080] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.470384] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.470397] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.489074] systemd[1]: Mounted Kernel Trace File System. [ 8.496748] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.502386] systemd[1]: nvfb-udev.service: Succeeded. [ 8.509589] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.520765] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.532582] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.534319] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.541499] systemd[1]: Starting Load/Save Random Seed... [ 8.550395] systemd[1]: Starting Create System Users... [ 8.578899] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.578899] [ 8.604554] systemd[1]: Finished Create System Users. [ 8.613172] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.620244] systemd[1]: Finished Load Kernel Modules. [ 8.624908] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.632669] systemd[1]: Mounting Kernel Configuration File System... [ 8.640777] systemd[1]: Started OP-TEE Client Supplicant. [ 8.649632] systemd[1]: Starting Apply Kernel Variables... [ 8.659759] systemd[1]: Finished Set the console keyboard layout. [ 8.666686] systemd[1]: Mounted Kernel Configuration File System. [ 8.683694] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.687593] systemd[1]: Reached target Local File Systems (Pre). [ 8.690788] systemd[1]: Reached target Local File Systems. [ 8.694090] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 9.807836] random: crng init done [ 9.809117] random: 7 urandom warning(s) missed due to ratelimiting [ 10.008156] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.015386] imx219 9-0010: board setup failed [ 10.020024] imx219: probe of 9-0010 failed with error -121 [ 10.033629] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.041537] imx219 10-0010: board setup failed [ 10.042964] imx219: probe of 10-0010 failed with error -121 [ 10.123860] hot-surface-alert cooling state: 0 -> 1 [ 11.134090] using random self ethernet address [ 11.150451] using random host ethernet address [ 11.626487] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.628528] Creating 1 MTD partitions on "spi6.0": [ 11.630344] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.411343] using random self ethernet address [ 12.412988] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.866163] nvidia: loading out-of-tree module taints kernel. [ 59.649308] watchdog: watchdog0: watchdog did not stop! [ 60.153039] Trying to unregister non-registered hwtime source [ 63.209683] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.211152] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized cvc initialized ÿä:20 UTC 2022ÿâavfs_clk_mach_post initialized ÿä aarcÿâavfs_clk_platform_post initialized ÿäh6ÿâcvc_late initialized regulator_post initialized ÿä4 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuration miÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäght be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.629] I> edid read success [0003.642] I> edid read success [0003.642] I> width = 640, height = 480, frequency = 25174825 [0003.642] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1280, height = 768, frequency = 79500000 [0003.643] I> width = 1360, height = 768, frequency = 85500000 [0003.643] I> width = 720, height = 480, frequency = 26973026 [0003.647] I> width = 720, height = 576, frequency = 26973026 [0003.653] I> width = 1280, height = 720, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1920, height = 1080, frequency = 148351648 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.681] I> width = 720, height = 576, frequency = 26973026 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 4096, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.727] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.741] initializing target [0003.742] calling apps_init() [0003.743] starting app kernel_boot_app [0003.743] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000772] Console: colour dummy device 80x25 [ 0.002291] printk: console [tty0] enabled [ 0.002362] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002415] pid_max: default: 32768 minimum: 301 [ 0.002614] LSM: Security Framework initializing [ 0.002672] Yama: becoming mindful. [ 0.002735] SELinux: Initializing. [ 0.002921] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002960] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006334] rcu: Hierarchical SRCU implementation. [ 0.006627] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007846] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007898] DTB Build time: Aug 10 2022 20:31:49 [ 0.012475] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.012786] Remapping and enabling EFI services. [ 0.014861] smp: Bringing up secondary CPUs ... [ 0.045157] Detected PIPT I-cache on CPU1 [ 0.045257] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074830] Detected PIPT I-cache on CPU2 [ 0.074964] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104631] Detected PIPT I-cache on CPU3 [ 0.104717] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134511] Detected PIPT I-cache on CPU4 [ 0.134666] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164400] Detected PIPT I-cache on CPU5 [ 0.164528] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164964] smp: Brought up 1 node, 6 CPUs [ 0.165171] SMP: Total of 6 processors activated. [ 0.165242] CPU features: detected: Privileged Access Never [ 0.165314] CPU features: detected: LSE atomic instructions [ 0.165328] CPU features: detected: User Access Override [ 0.165342] CPU features: detected: 32-bit EL0 Support [ 0.165354] CPU features: detected: RAS Extension Support [ 0.165366] CPU features: detected: CRC32 instructions [ 0.165379] CPU features: detected: 32-bit EL1 Support [ 0.237782] CPU: All CPU(s) started at EL2 [ 0.243717] devtmpfs: initialized [ 0.292451] Registered cp15_barrier emulation handler [ 0.292572] Registered setend emulation handler [ 0.292611] KASLR enabled [ 0.292912] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.292939] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.294416] pinctrl core: initialized pinctrl subsystem [ 0.295625] SMBIOS 3.0.0 present. [ 0.295658] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.296386] NET: Registered protocol family 16 [ 0.298405] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.298906] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.299606] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.299671] audit: initializing netlink subsys (disabled) [ 0.299962] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.300439] thermal_sys: Registered thermal governor 'step_wise' [ 0.300447] thermal_sys: Registered thermal governor 'power_allocator' [ 0.300461] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.302861] cpuidle: using governor menu [ 0.303138] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.303636] ASID allocator initialised with 32768 entries [ 0.303863] Serial: AMBA PL011 UART driver [ 0.307781] Tegra reboot handler registered. [ 0.382829] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.382957] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.383142] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.383179] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.383310] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.383391] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.383519] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.383553] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.383660] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.383693] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.385945] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.385976] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.386001] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.386024] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.386050] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.386072] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.386117] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.386147] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.386186] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.386209] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.386232] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.386274] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.386297] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.386319] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.386341] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.386363] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.386385] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.386539] mc-err: mcerr ops are set to t19x [ 0.398407] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.398430] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.398443] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.398455] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.405961] ACPI: Interpreter disabled. [ 0.407234] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.408583] iommu: Default domain type: Translated [ 0.408663] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.409017] SCSI subsystem initialized [ 0.409196] usbcore: registered new interface driver usbfs [ 0.409235] usbcore: registered new interface driver hub [ 0.409285] usbcore: registered new device driver usb [ 0.409643] mc: Linux media interface: v0.10 [ 0.409671] videodev: Linux video capture interface: v2.00 [ 0.409941] pps_core: LinuxPPS API ver. 1 registered [ 0.409953] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.409972] PTP clock support registered [ 0.410173] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.410538] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.410638] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.411224] Registered efivars operations [ 0.416541] FPGA manager framework [ 0.416646] Advanced Linux Sound Architecture Driver Initialized. [ 0.417255] Bluetooth: Core ver 2.22 [ 0.417299] NET: Registered protocol family 31 [ 0.417312] Bluetooth: HCI device and connection manager initialized [ 0.417328] Bluetooth: HCI socket layer initialized [ 0.417345] Bluetooth: L2CAP socket layer initialized [ 0.417368] Bluetooth: SCO socket layer initialized [ 0.419066] camchar: rtcpu character device driver loaded [ 0.419684] clocksource: Switched to clocksource arch_sys_counter [ 0.708984] VFS: Disk quotas dquot_6.6.0 [ 0.709062] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.709445] pnp: PnP ACPI: disabled [ 0.719424] la/ptsa driver initialized. [ 0.719535] NET: Registered protocol family 2 [ 0.719728] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.725409] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.725476] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.725799] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.726242] TCP: Hash tables configured (established 65536 bind 65536) [ 0.726371] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.726461] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.726695] NET: Registered protocol family 1 [ 0.727732] RPC: Registered named UNIX socket transport module. [ 0.727792] RPC: Registered udp transport module. [ 0.727813] RPC: Registered tcp transport module. [ 0.727833] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.727864] PCI: CLS 0 bytes, default 64 [ 0.728171] Trying to unpack rootfs image as initramfs... [ 0.998550] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.001764] Freeing initrd memory: 8196K [ 1.006165] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.006211] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.006285] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.006716] kvm [1]: IPA Size Limit: 40 bits [ 1.007273] kvm [1]: vgic interrupt IRQ9 [ 1.007883] kvm [1]: VHE mode initialized successfully [ 1.009310] Initialise system trusted keyrings [ 1.009657] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.015869] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.016749] NFS: Registering the id_resolver key type [ 1.016789] Key type id_resolver registered [ 1.016811] Key type id_legacy registered [ 1.016905] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.016938] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.016983] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.026828] NET: Registered protocol family 38 [ 1.026885] Key type asymmetric registered [ 1.026907] Asymmetric key parser 'x509' registered [ 1.026974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.027280] io scheduler mq-deadline registered [ 1.027304] io scheduler kyber registered [ 1.033051] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.035760] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.035858] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.035939] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.036016] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.036091] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.041045] scrncapt: init (heads:4 wins:6 planes:4) [ 1.041248] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.042266] EINJ: ACPI disabled. [ 1.045375] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.045410] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.045431] tegra-pmc: ### PMC reset level: L1 [ 1.045450] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.045532] tegra-pmc: PMC Prod config success [ 1.051294] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.056555] random: fast init done [ 1.057288] printk: console [ttyTCU0] enabled [ 2.608744] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.613421] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.618006] arm-smmu 10000000.iommu: stage 1 translation [ 2.623853] arm-smmu 10000000.iommu: stage 2 translation [ 2.628996] arm-smmu 10000000.iommu: nested translation [ 2.634582] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.641760] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.651880] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.654859] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.661187] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.668816] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.674482] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.679204] arm-smmu 12000000.iommu: stage 1 translation [ 2.684456] arm-smmu 12000000.iommu: stage 2 translation [ 2.690139] arm-smmu 12000000.iommu: nested translation [ 2.695312] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.702492] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.712656] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.715592] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.722177] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.729827] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.739355] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.742858] tegra_profiler: auth: init [ 2.747158] THERMAL EST: found 3 subdevs [ 2.750271] THERMAL EST num_resources: 0 [ 2.754370] [THERMAL EST subdev 0] [ 2.757690] [THERMAL EST subdev 1] [ 2.760854] [THERMAL EST subdev 2] [ 2.764407] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.770626] THERMAL EST: thz register success. [ 2.775047] THERMAL EST: end of probe, return err: 0 [ 2.780173] nvsciipc: loaded module [ 2.787365] tun: Universal TUN/TAP device driver, 1.6 [ 2.789668] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.795865] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.801673] e1000e: Intel(R) PRO/1000 Network Driver [ 2.806348] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.812709] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.817725] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.823954] PPP generic driver version 2.4.2 [ 2.828186] PPP BSD Compression module registered [ 2.832971] PPP Deflate Compression module registered [ 2.838197] PPP MPPE Compression module registered [ 2.842982] usbcore: registered new interface driver r8152 [ 2.848729] usbcore: registered new interface driver asix [ 2.853799] usbcore: registered new interface driver ax88179_178a [ 2.859928] usbcore: registered new interface driver cdc_ether [ 2.866131] usbcore: registered new interface driver net1080 [ 2.871728] usbcore: registered new interface driver cdc_subset [ 2.877516] usbcore: registered new interface driver zaurus [ 2.883469] usbcore: registered new interface driver cdc_ncm [ 2.889155] usbcore: registered new interface driver aqc111 [ 2.894817] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.900599] ohci-pci: OHCI PCI platform driver [ 2.905187] ohci-platform: OHCI generic platform driver [ 2.910767] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.917078] usbcore: registered new interface driver uas [ 2.921204] usbcore: registered new interface driver usb-storage [ 2.927332] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.933343] mousedev: PS/2 mouse device common for all mice [ 2.938661] usbcore: registered new interface driver xpad [ 2.946694] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.949359] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.957134] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.963765] i2c /dev entries driver [ 2.966985] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.972630] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.977845] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.983253] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.988597] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.994460] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.999840] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.013142] device-mapper: uevent: version 1.0.3 [ 3.013564] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.020253] cpuidle: Initializing cpuidle driver [ 3.024365] sdhci: Secure Digital Host Controller Interface driver [ 3.028693] sdhci: Copyright(c) Pierre Ossman [ 3.032798] Synopsys Designware Multimedia Card Interface Driver [ 3.039247] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.045223] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.045999] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.058454] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.080800] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.090525] vdd-1v0: supplied by regulator-dummy [ 3.096076] vdd-1v8-hs: supplied by regulator-dummy [ 3.100822] vdd-1v8-ls: supplied by regulator-dummy [ 3.105626] vdd-1v8-ao: supplied by regulator-dummy [ 3.109566] vddio-ddr-1v1: supplied by regulator-dummy [ 3.113963] vdd-rtc: supplied by regulator-dummy [ 3.115788] spmic-ldo1: supplied by regulator-dummy [ 3.116970] vdd-ao-3v3: supplied by regulator-dummy [ 3.123157] vddio-emmc-3v3: supplied by regulator-dummy [ 3.129520] spmic-ldo4: supplied by regulator-dummy [ 3.130713] vdd-usb-3v3: supplied by regulator-dummy [ 3.136882] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.143131] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.148697] spmic-ldo8: supplied by vdd-1v8-ls [ 3.150316] gpio-510 (gpio_default): hogged as output/high [ 3.151714] gpio-511 (gpio_default): hogged as output/high [ 3.154572] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.291149] max77686-rtc max77620-rtc: registered as rtc0 [ 3.292571] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.292905] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.119809] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.120893] hid: raw HID events driver (C) Jiri Kosina [ 4.121735] usbcore: registered new interface driver usbhid [ 4.121922] usbhid: USB HID core driver [ 4.123999] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.125304] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.199887] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.274448] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.370 ms) ÿá[ 4.209833] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.210369] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.211360] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.212271] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.213941] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.214593] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.215256] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.216577] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.216795] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.219401] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.226252] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.232662] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.237490] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.243852] denver_knobs_init:MTS_VERSION:55637613 [ 4.256721] t19x_cache tegra-cache: probed [ 4.259517] optee: probing for conduit method. [ 4.260503] optee: revision 3.16 (65cc2218) [ 4.261453] optee: dynamic shared memory is enabled [ 4.265111] optee: initialized driver [ 4.270933] nvpmodel: initialized successfully [ 4.272390] tegra_hv: get_hvd: not initialized yet [ 4.276990] user_ivc_mempool: hypervisor not present [ 4.283140] usbcore: registered new interface driver snd-usb-audio [ 4.289547] u32 classifier [ 4.291009] input device check on [ 4.294813] Actions configured [ 4.298210] Initializing XFRM netlink socket [ 4.303012] NET: Registered protocol family 10 [ 4.309641] Segment Routing with IPv6 [ 4.310426] NET: Registered protocol family 17 [ 4.315127] NET: Registered protocol family 15 [ 4.319456] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.332596] Bluetooth: RFCOMM socket layer initialized [ 4.337393] Bluetooth: RFCOMM ver 1.11 [ 4.341517] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.347097] Bluetooth: HIDP socket layer initialized [ 4.353180] 9pnet: Installing 9P2000 support [ 4.356779] Key type dns_resolver registered [ 4.361876] registered taskstats version 1 [ 4.365214] Loading compiled-in X.509 certificates [ 4.377174] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.381077] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.391128] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.392959] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.401456] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.409845] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.527810] tegra194-pcie 14160000.pcie: Link up [ 4.530926] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.531150] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.531305] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.531541] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.531789] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.532183] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.532604] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.546385] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.546944] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.547379] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.548969] pci 0004:01:00.0: supports D1 D2 [ 4.549169] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.557342] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.557785] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.558040] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.558443] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.558686] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.558912] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.562721] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.570001] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.578260] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.588563] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.593355] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.598765] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.606516] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.615130] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.616581] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.624844] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.633297] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.748640] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.749306] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.749561] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.749719] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.749995] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.750203] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.750617] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.751033] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.767124] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.767525] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.769726] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.771224] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.772819] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.774790] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.775856] pci 0005:00:00.0: Removing from iommu group 7 [ 5.776130] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.814617] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.836271] host1x 13e10000.host1x: initialized [ 5.837731] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.838672] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.839894] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.840612] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.841630] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.842201] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.843164] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.843863] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.844690] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.848465] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.858784] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.865697] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.875640] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.882579] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.892583] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.899796] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.909378] falcon 15340000.vic: Adding to iommu group 17 [ 5.923414] falcon 15340000.vic: initialized [ 5.924369] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.929929] falcon 15380000.nvjpg: initialized [ 5.930526] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.942765] falcon 154c0000.nvenc: initialized [ 5.943410] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.953172] falcon 15a80000.nvenc1: initialized [ 5.953775] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.964948] nvdec 15480000.nvdec: initialized [ 5.965551] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.974256] nvdec 15140000.nvdec1: initialized [ 5.974761] tsec 15500000.tsec: Adding to iommu group 18 [ 5.980217] tsec 15500000.tsec: initialized [ 5.980665] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.989841] tsec 15100000.tsecb: initialized [ 5.993970] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.018243] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.029178] gpio-374 (wifi-enable): hogged as output/high [ 6.029465] gpio-431 (camera-control-output-low): hogged as output/low [ 6.029763] gpio-432 (camera-control-output-low): hogged as output/low [ 6.031330] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.032810] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.034313] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.040827] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.046195] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.051861] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.057303] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.065708] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.073122] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.083983] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.089784] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.095831] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.104552] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.113726] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.120835] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.128693] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.135150] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.144719] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.150989] pva 16000000.pva0: Adding to iommu group 22 [ 6.177447] pva 16000000.pva0: initialized [ 6.182508] pva 16800000.pva1: Adding to iommu group 23 [ 6.193956] pva 16800000.pva1: initialized [ 6.198547] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.211308] nvdla 15880000.nvdla0: initialized [ 6.212916] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.221472] nvdla 158c0000.nvdla1: initialized [ 6.223882] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.224197] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.224498] tegradccommon 15200000.display-hub: dma mapping done [ 6.226121] tegradc 15200000.display: Adding to iommu group 26 [ 6.233512] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.233956] generic_infoframe_type: 0x87 [ 6.234188] tegradc 15200000.display: DT parsed successfully [ 6.234466] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.240698] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.242719] tegradc 15210000.display: Adding to iommu group 26 [ 6.246983] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.248673] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.264574] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.265542] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.272818] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.272823] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.287145] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.294476] tegra_cec 3960000.tegra_cec: probed [ 6.295344] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.300691] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.317406] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.317562] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.336025] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.341256] kfuse 3830000.kfuse: initialized [ 6.341984] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.346498] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.359242] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.359595] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.366020] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.374774] tegradc 15210000.display: disp0 connected to head1->sor [ 6.379204] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.384393] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.394659] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.400588] tegradc 15210000.display: DT parsed successfully [ 6.407794] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.412180] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.430461] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.435550] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.455254] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.455659] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.458417] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.466963] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.475410] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.482323] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.489529] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.496740] usb usb1: Product: xHCI Host Controller [ 6.501968] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.508308] usb usb1: SerialNumber: 3610000.xhci [ 6.513753] hub 1-0:1.0: USB hub found [ 6.516973] hub 1-0:1.0: 4 ports detected [ 6.521089] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.526236] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.533823] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.541587] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.549144] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.556636] usb usb2: Product: xHCI Host Controller [ 6.561353] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.567572] usb usb2: SerialNumber: 3610000.xhci [ 6.572818] hub 2-0:1.0: USB hub found [ 6.576337] hub 2-0:1.0: 4 ports detected [ 6.615286] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.621791] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.623868] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.624047] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.637784] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1904000 KHz, changing to: 1907200 KHz [ 6.638780] tegra194-cpufreq ccplex: probed with BWMGR [ 6.640099] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.640816] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.641292] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.642630] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.651497] mmc0: CQHCI version 5.10 [ 6.653287] tegra194-vi5 15c10000.vi: initialized [ 6.655079] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.656403] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.660187] generic_infoframe_type: 0x87 [ 6.666621] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.670100] tegradc 15200000.display: DT parsed successfully [ 6.678416] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.678424] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.678450] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.683758] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.690516] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.698461] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.711704] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.711745] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.711754] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.711759] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.713000] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.713044] nvethernet 2490000.ethernet: Macsec not supported [ 6.714296] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.715430] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.715593] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.715761] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.716705] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.718139] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.718142] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.718390] tegra-se-nvhost 15810000.se: initialized [ 6.718523] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.718528] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.718688] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.719731] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.719735] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.721915] tegradc 15200000.display: probed [ 6.787737] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.793429] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.813068] mmc0: Command Queue Engine enabled [ 6.818326] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.822188] mmc0: periodic cache flush enabled [ 6.829111] tegra-se-nvhost 15820000.se: initialized [ 6.834613] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.835136] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.847184] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.853594] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.861090] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.876488] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.878968] tegra-se-nvhost 15830000.se: initialized [ 6.942390] Console: switching to colour frame buffer device 240x67 [ 6.943137] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.948274] tegradc 15200000.display: fb registered [ 6.954936] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.959394] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.966301] tegra-se-nvhost 15840000.se: initialized [ 6.972204] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.977605] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.981906] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.987643] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.987649] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.987653] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.987677] usb 1-2: Manufacturer: Generic [ 6.989603] hub 1-2:1.0: USB hub found [ 6.989676] tegra_actmon d230000.actmon: in actmon_register()... [ 6.989862] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.990236] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.990896] hvc_sysfs: hypervisor is not present [ 7.016386] ALSA device list: [ 7.028507] hub 1-2:1.0: 4 ports detected [ 7.033856] No soundcards found. [ 7.108631] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.120859] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.122174] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.122390] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.123393] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.123588] Extcon AUX1(HDMI) enable [ 7.123846] tegradc 15210000.display: disp1 connected to head1->sor [ 7.124157] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.124498] tegradc 15210000.display: DT parsed successfully [ 7.124719] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.126985] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.132973] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.146145] tegradc 15210000.display: probed [ 7.146456] tegradc 15210000.display: fb registered [ 7.152123] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.156043] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.157772] Freeing unused kernel memory: 3968K [ 7.163789] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.168237] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.179799] Run /init as init process [ 7.182077] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.193108] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.193130] tegradc 15210000.display: blank - powerdown [ 7.197563] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.197567] Extcon DP: HPD disabled [ 7.197570] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.197593] random: crng init done [ 7.211058] usb 2-3: Manufacturer: Generic [ 7.211181] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.221346] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.251768] hub 2-3:1.0: USB hub found [ 7.253762] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.259244] tegradc 15200000.display: blank - powerdown [ 7.275745] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.291519] Root device found: mmcblk0p1 [ 7.293451] Found dev node: /dev/mmcblk0p1 [ 7.304543] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.304548] Extcon AUX1(HDMI) disable [ 7.327877] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.328749] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.328787] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.333238] Rootfs mounted over mmcblk0p1 [ 7.342632] tegradc 15200000.display: unblank [ 7.343790] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.343990] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.350065] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.352003] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.356173] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.356177] Extcon AUX1(HDMI) enable [ 7.359758] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.368810] tegradc 15200000.display: sync windows ret = 247 [ 7.371142] Switching from initrd to actual rootfs [ 7.403896] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.405511] Extcon HDMI: HPD enabled [ 7.406982] tegradc 15200000.display: hdmi: plugged [ 7.424303] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.425937] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.427660] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.431283] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.438223] usb 1-3: Product: Bluetooth Radio [ 7.442845] usb 1-3: Manufacturer: Realtek [ 7.446953] usb 1-3: SerialNumber: 00e04c000001 [ 7.558082] systemd[1]: System time before build time, advancing clock. [ 7.628486] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.633494] systemd[1]: Detected architecture arm64. [ 7.678530] systemd[1]: Set hostname to . [ 7.837417] systemd-sysv-generator[242]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.185908] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.187711] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.193325] systemd[1]: Created slice system-modprobe.slice. [ 8.198017] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.202424] systemd[1]: Created slice User and Session Slice. [ 8.205987] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.210413] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.213933] systemd[1]: Reached target User and Group Name Lookups. [ 8.217378] systemd[1]: Reached target Slices. [ 8.220803] systemd[1]: Reached target Swap. [ 8.224991] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.228875] systemd[1]: Listening on Syslog Socket. [ 8.232627] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.236221] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.240642] systemd[1]: Listening on Journal Audit Socket. [ 8.244404] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.249553] systemd[1]: Listening on Journal Socket. [ 8.254799] systemd[1]: Listening on udev Control Socket. [ 8.258538] systemd[1]: Listening on udev Kernel Socket. [ 8.267237] systemd[1]: Mounting Huge Pages File System... [ 8.276167] systemd[1]: Mounting POSIX Message Queue File System... [ 8.285012] systemd[1]: Mounting RPC Pipe File System... [ 8.293766] systemd[1]: Mounting Kernel Debug File System... [ 8.302901] systemd[1]: Mounting Kernel Trace File System... [ 8.313543] systemd[1]: Starting Journal Service... [ 8.322881] systemd[1]: Starting Set the console keyboard layout... [ 8.331832] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.335571] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.342736] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.351133] systemd[1]: Started Nameserver information manager. [ 8.356220] systemd[1]: Reached target Network (Pre). [ 8.363990] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.365910] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.374943] systemd[1]: Starting Load Kernel Modules... [ 8.383399] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.392973] systemd[1]: Starting udev Coldplug all Devices... [ 8.402999] systemd[1]: Mounted Huge Pages File System. [ 8.407013] systemd[1]: Mounted POSIX Message Queue File System. [ 8.411065] systemd[1]: Mounted RPC Pipe File System. [ 8.412054] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.417203] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.419486] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.420272] systemd[1]: Mounted Kernel Debug File System. [ 8.421221] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.424194] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.424200] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.425859] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.427510] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.427704] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.427718] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.436615] systemd[1]: Mounted Kernel Trace File System. [ 8.442916] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.447973] systemd[1]: nvfb-udev.service: Succeeded. [ 8.452178] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.461847] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.474256] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.476095] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.482189] systemd[1]: Starting Load/Save Random Seed... [ 8.491301] systemd[1]: Starting Create System Users... [ 8.516524] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.516524] [ 8.545352] systemd[1]: Finished Load/Save Random Seed. [ 8.552270] systemd[1]: Finished Load Kernel Modules. [ 8.557164] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.564792] systemd[1]: Mounting Kernel Configuration File System... [ 8.573306] systemd[1]: Started OP-TEE Client Supplicant. [ 8.582419] systemd[1]: Starting Apply Kernel Variables... [ 8.589658] systemd[1]: Mounted Kernel Configuration File System. [ 8.599431] systemd[1]: Finished Set the console keyboard layout. [ 8.611280] systemd[1]: Finished Create System Users. [ 9.956807] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.964436] imx219 9-0010: board setup failed [ 9.965759] imx219: probe of 9-0010 failed with error -121 [ 9.978188] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.984850] imx219 10-0010: board setup failed [ 9.984965] imx219: probe of 10-0010 failed with error -121 [ 10.156804] hot-surface-alert cooling state: 0 -> 1 [ 10.600001] using random self ethernet address [ 10.601236] using random host ethernet address [ 11.598958] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.600222] Creating 1 MTD partitions on "spi6.0": [ 11.601373] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.310987] using random self ethernet address [ 12.312530] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.821793] nvidia: loading out-of-tree module taints kernel. [ 59.433953] watchdog: watchdog0: watchdog did not stop! [ 59.892696] Trying to unregister non-registered hwtime source [ 62.950628] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.952333] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeouôÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/Tÿâclk_early initialized ÿäC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secuÿât194_ec_get_ec_list: found 45 ecs ÿäre externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuratioÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿän might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.617] E> invalid display type [0003.618] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.646] I> edid read success [0003.647] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.686] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.747] calling apps_init() [0003.747] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000661] Console: colour dummy device 80x25 [ 0.001982] printk: console [tty0] enabled [ 0.002058] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002093] pid_max: default: 32768 minimum: 301 [ 0.002301] LSM: Security Framework initializing [ 0.002371] Yama: becoming mindful. [ 0.002421] SELinux: Initializing. [ 0.002613] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002655] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005665] rcu: Hierarchical SRCU implementation. [ 0.005943] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006893] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006942] DTB Build time: Aug 10 2022 20:31:49 [ 0.009921] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010217] Remapping and enabling EFI services. [ 0.012211] smp: Bringing up secondary CPUs ... [ 0.041346] Detected PIPT I-cache on CPU1 [ 0.041449] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070976] Detected PIPT I-cache on CPU2 [ 0.071118] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100804] Detected PIPT I-cache on CPU3 [ 0.100941] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130650] Detected PIPT I-cache on CPU4 [ 0.130850] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160570] Detected PIPT I-cache on CPU5 [ 0.160657] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160976] smp: Brought up 1 node, 6 CPUs [ 0.161133] SMP: Total of 6 processors activated. [ 0.161218] CPU features: detected: Privileged Access Never [ 0.161240] CPU features: detected: LSE atomic instructions [ 0.161253] CPU features: detected: User Access Override [ 0.161267] CPU features: detected: 32-bit EL0 Support [ 0.161280] CPU features: detected: RAS Extension Support [ 0.161293] CPU features: detected: CRC32 instructions [ 0.161307] CPU features: detected: 32-bit EL1 Support [ 0.228919] CPU: All CPU(s) started at EL2 [ 0.234746] devtmpfs: initialized [ 0.285965] Registered cp15_barrier emulation handler [ 0.286071] Registered setend emulation handler [ 0.286091] KASLR enabled [ 0.286391] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286415] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287758] pinctrl core: initialized pinctrl subsystem [ 0.288754] SMBIOS 3.0.0 present. [ 0.288782] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289396] NET: Registered protocol family 16 [ 0.291467] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291960] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292695] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292750] audit: initializing netlink subsys (disabled) [ 0.292969] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293459] thermal_sys: Registered thermal governor 'step_wise' [ 0.293465] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293480] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295732] cpuidle: using governor menu [ 0.296253] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296625] ASID allocator initialised with 32768 entries [ 0.296852] Serial: AMBA PL011 UART driver [ 0.300386] Tegra reboot handler registered. [ 0.381204] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.381355] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.381533] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.381577] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.381703] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.381765] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.381918] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.381997] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.382123] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.382168] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.384450] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.384484] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.384513] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.384540] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.384569] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.384596] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.384652] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.384706] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.384733] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.384774] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.384798] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.384822] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.384846] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.384871] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.384896] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.384920] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.384943] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.385030] mc-err: mcerr ops are set to t19x [ 0.397748] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.397786] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.397802] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.397816] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.404975] ACPI: Interpreter disabled. [ 0.406246] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.407701] iommu: Default domain type: Translated [ 0.407765] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.408165] SCSI subsystem initialized [ 0.408344] usbcore: registered new interface driver usbfs [ 0.408389] usbcore: registered new interface driver hub [ 0.408430] usbcore: registered new device driver usb [ 0.408828] mc: Linux media interface: v0.10 [ 0.408857] videodev: Linux video capture interface: v2.00 [ 0.409167] pps_core: LinuxPPS API ver. 1 registered [ 0.409180] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.409202] PTP clock support registered [ 0.409396] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.409702] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.409803] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.410444] Registered efivars operations [ 0.417796] FPGA manager framework [ 0.417907] Advanced Linux Sound Architecture Driver Initialized. [ 0.418542] Bluetooth: Core ver 2.22 [ 0.418580] NET: Registered protocol family 31 [ 0.418592] Bluetooth: HCI device and connection manager initialized [ 0.418607] Bluetooth: HCI socket layer initialized [ 0.418622] Bluetooth: L2CAP socket layer initialized [ 0.418643] Bluetooth: SCO socket layer initialized [ 0.420155] camchar: rtcpu character device driver loaded [ 0.420841] clocksource: Switched to clocksource arch_sys_counter [ 0.753985] VFS: Disk quotas dquot_6.6.0 [ 0.754098] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.754406] pnp: PnP ACPI: disabled [ 0.767087] la/ptsa driver initialized. [ 0.767215] NET: Registered protocol family 2 [ 0.767424] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.772038] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.772103] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.772407] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.772891] TCP: Hash tables configured (established 65536 bind 65536) [ 0.773026] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.773115] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.773323] NET: Registered protocol family 1 [ 0.773900] RPC: Registered named UNIX socket transport module. [ 0.773914] RPC: Registered udp transport module. [ 0.773923] RPC: Registered tcp transport module. [ 0.773932] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.773949] PCI: CLS 0 bytes, default 64 [ 0.774190] Trying to unpack rootfs image as initramfs... [ 0.958130] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.960243] Freeing initrd memory: 8196K [ 0.964313] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.964349] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.964402] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.964858] kvm [1]: IPA Size Limit: 40 bits [ 0.965432] kvm [1]: vgic interrupt IRQ9 [ 0.965884] kvm [1]: VHE mode initialized successfully [ 0.967089] Initialise system trusted keyrings [ 0.967339] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.971682] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.972389] NFS: Registering the id_resolver key type [ 0.972415] Key type id_resolver registered [ 0.972424] Key type id_legacy registered [ 0.972487] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.972504] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.972531] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.979923] NET: Registered protocol family 38 [ 0.979945] Key type asymmetric registered [ 0.979956] Asymmetric key parser 'x509' registered [ 0.979999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.980172] io scheduler mq-deadline registered [ 0.980184] io scheduler kyber registered [ 0.984387] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.986507] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.986565] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.986617] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.986666] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.986715] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.990753] scrncapt: init (heads:4 wins:6 planes:4) [ 0.991050] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.991579] EINJ: ACPI disabled. [ 0.993909] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.993929] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.993939] tegra-pmc: ### PMC reset level: L1 [ 0.993947] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.993985] tegra-pmc: PMC Prod config success [ 0.998389] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.002479] random: fast init done [ 1.002561] printk: console [ttyTCU0] enabled [ 2.555161] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.559751] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.564369] arm-smmu 10000000.iommu: stage 1 translation [ 2.569838] arm-smmu 10000000.iommu: stage 2 translation [ 2.575306] arm-smmu 10000000.iommu: nested translation [ 2.580647] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.587825] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.599314] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.600662] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.607516] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.615069] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.620283] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.625023] arm-smmu 12000000.iommu: stage 1 translation [ 2.630778] arm-smmu 12000000.iommu: stage 2 translation [ 2.635942] arm-smmu 12000000.iommu: nested translation [ 2.641402] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.648548] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.660404] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.661929] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.668236] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.675943] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.685417] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.688646] tegra_profiler: auth: init [ 2.693158] THERMAL EST: found 3 subdevs [ 2.696555] THERMAL EST num_resources: 0 [ 2.700430] [THERMAL EST subdev 0] [ 2.703492] [THERMAL EST subdev 1] [ 2.707162] [THERMAL EST subdev 2] [ 2.710435] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.716957] THERMAL EST: thz register success. [ 2.721110] THERMAL EST: end of probe, return err: 0 [ 2.726212] nvsciipc: loaded module [ 2.733638] tun: Universal TUN/TAP device driver, 1.6 [ 2.735909] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.742180] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.747517] e1000e: Intel(R) PRO/1000 Network Driver [ 2.752691] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.758514] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.764036] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.770245] PPP generic driver version 2.4.2 [ 2.774481] PPP BSD Compression module registered [ 2.778786] PPP Deflate Compression module registered [ 2.784008] PPP MPPE Compression module registered [ 2.789316] usbcore: registered new interface driver r8152 [ 2.794795] usbcore: registered new interface driver asix [ 2.799868] usbcore: registered new interface driver ax88179_178a [ 2.806259] usbcore: registered new interface driver cdc_ether [ 2.811934] usbcore: registered new interface driver net1080 [ 2.817561] usbcore: registered new interface driver cdc_subset [ 2.823599] usbcore: registered new interface driver zaurus [ 2.829280] usbcore: registered new interface driver cdc_ncm [ 2.834950] usbcore: registered new interface driver aqc111 [ 2.840610] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.846926] ohci-pci: OHCI PCI platform driver [ 2.850994] ohci-platform: OHCI generic platform driver [ 2.856927] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.863044] usbcore: registered new interface driver uas [ 2.867289] usbcore: registered new interface driver usb-storage [ 2.873683] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.879464] mousedev: PS/2 mouse device common for all mice [ 2.884433] usbcore: registered new interface driver xpad [ 2.892786] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.895427] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.903229] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.909812] i2c /dev entries driver [ 2.912852] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.918675] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.924084] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.929691] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.934724] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.940439] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.945880] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.959718] device-mapper: uevent: version 1.0.3 [ 2.960163] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.966148] cpuidle: Initializing cpuidle driver [ 2.970238] sdhci: Secure Digital Host Controller Interface driver [ 2.975062] sdhci: Copyright(c) Pierre Ossman [ 2.979129] Synopsys Designware Multimedia Card Interface Driver [ 2.985100] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.991353] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.992036] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.004289] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.023501] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.032361] vdd-1v0: supplied by regulator-dummy [ 3.037777] vdd-1v8-hs: supplied by regulator-dummy [ 3.042437] vdd-1v8-ls: supplied by regulator-dummy [ 3.047159] vdd-1v8-ao: supplied by regulator-dummy [ 3.050974] vddio-ddr-1v1: supplied by regulator-dummy [ 3.055291] vdd-rtc: supplied by regulator-dummy [ 3.056920] spmic-ldo1: supplied by regulator-dummy [ 3.058048] vdd-ao-3v3: supplied by regulator-dummy [ 3.064159] vddio-emmc-3v3: supplied by regulator-dummy [ 3.070294] spmic-ldo4: supplied by regulator-dummy [ 3.071443] vdd-usb-3v3: supplied by regulator-dummy [ 3.077519] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.083567] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.088991] spmic-ldo8: supplied by vdd-1v8-ls [ 3.090304] gpio-510 (gpio_default): hogged as output/high [ 3.091565] gpio-511 (gpio_default): hogged as output/high [ 3.097868] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.236493] max77686-rtc max77620-rtc: registered as rtc0 [ 3.237452] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.237744] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.945520] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.946489] hid: raw HID events driver (C) Jiri Kosina [ 3.947189] usbcore: registered new interface driver usbhid [ 3.947331] usbhid: USB HID core driver [ 3.949079] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.950194] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.031851] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.107427] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 76.384 ms) ÿá[ 4.035076] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.035619] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.036704] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.037466] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.039053] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.039660] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.040264] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.041827] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.042165] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.043938] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.052120] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.057897] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.062930] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.070197] denver_knobs_init:MTS_VERSION:55637613 [ 4.082162] t19x_cache tegra-cache: probed [ 4.085088] optee: probing for conduit method. [ 4.086051] optee: revision 3.16 (65cc2218) [ 4.087660] optee: dynamic shared memory is enabled [ 4.090357] optee: initialized driver [ 4.096942] nvpmodel: initialized successfully [ 4.097892] tegra_hv: get_hvd: not initialized yet [ 4.102587] user_ivc_mempool: hypervisor not present [ 4.109096] usbcore: registered new interface driver snd-usb-audio [ 4.115663] u32 classifier [ 4.116592] input device check on [ 4.120167] Actions configured [ 4.123655] Initializing XFRM netlink socket [ 4.128470] NET: Registered protocol family 10 [ 4.134864] Segment Routing with IPv6 [ 4.135966] NET: Registered protocol family 17 [ 4.140501] NET: Registered protocol family 15 [ 4.144658] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.158454] Bluetooth: RFCOMM socket layer initialized [ 4.162914] Bluetooth: RFCOMM ver 1.11 [ 4.167108] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.172607] Bluetooth: HIDP socket layer initialized [ 4.178729] 9pnet: Installing 9P2000 support [ 4.182368] Key type dns_resolver registered [ 4.187588] registered taskstats version 1 [ 4.190819] Loading compiled-in X.509 certificates [ 4.204116] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.206826] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.216792] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.218531] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.226999] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.235768] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.352879] tegra194-pcie 14160000.pcie: Link up [ 4.355585] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.355801] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.355952] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.356185] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.356402] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.356755] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.357227] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.372046] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.372578] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.373111] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.374537] pci 0004:01:00.0: supports D1 D2 [ 4.374718] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.383541] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.383866] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.384098] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.384489] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.384729] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.385003] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.387708] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.394899] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.403555] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.413529] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.418517] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.423935] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.430925] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.440019] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.441379] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.450042] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.458326] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.564961] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.565489] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.565702] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.565945] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.566244] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.566465] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.566862] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.567311] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.583087] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.583392] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.584797] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.586072] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.587845] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.589421] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.590242] pci 0005:00:00.0: Removing from iommu group 7 [ 5.590536] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.621809] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.643760] host1x 13e10000.host1x: initialized [ 5.645307] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.646197] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.647231] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.647868] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.648984] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.649573] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.650640] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.651285] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.658253] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.665012] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.675096] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.681880] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.691697] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.698764] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.708885] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.716062] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.725878] falcon 15340000.vic: Adding to iommu group 17 [ 5.739774] falcon 15340000.vic: initialized [ 5.740678] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.746199] falcon 15380000.nvjpg: initialized [ 5.746825] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.759762] falcon 154c0000.nvenc: initialized [ 5.760497] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.770016] falcon 15a80000.nvenc1: initialized [ 5.770708] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.781167] nvdec 15480000.nvdec: initialized [ 5.781827] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.790708] nvdec 15140000.nvdec1: initialized [ 5.791253] tsec 15500000.tsec: Adding to iommu group 18 [ 5.797313] tsec 15500000.tsec: initialized [ 5.797771] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.806306] tsec 15100000.tsecb: initialized [ 5.810170] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.838068] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.849292] gpio-374 (wifi-enable): hogged as output/high [ 5.849566] gpio-431 (camera-control-output-low): hogged as output/low [ 5.849863] gpio-432 (camera-control-output-low): hogged as output/low [ 5.851815] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.853681] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.854225] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.856974] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.862706] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.868136] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.873686] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.881876] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.889572] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.900648] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.906194] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.912040] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.920860] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.930264] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.937429] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.944903] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.951109] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.961072] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.967295] pva 16000000.pva0: Adding to iommu group 22 [ 5.992706] pva 16000000.pva0: initialized [ 5.998147] pva 16800000.pva1: Adding to iommu group 23 [ 6.008808] pva 16800000.pva1: initialized [ 6.013842] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.026376] nvdla 15880000.nvdla0: initialized [ 6.027580] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.036052] nvdla 158c0000.nvdla1: initialized [ 6.038357] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.038676] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.039448] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.039625] tegradc 15200000.display: Adding to iommu group 26 [ 6.039821] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.040464] tegradccommon 15200000.display-hub: dma mapping done [ 6.040947] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.048684] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.048799] tegradc 15210000.display: Adding to iommu group 26 [ 6.051834] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.058007] generic_infoframe_type: 0x87 [ 6.063507] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.069163] tegradc 15200000.display: DT parsed successfully [ 6.073020] tegra_cec 3960000.tegra_cec: probed [ 6.078847] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.085332] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.103878] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.105141] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.111242] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.118387] kfuse 3830000.kfuse: initialized [ 6.126166] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.138814] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.139150] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.144611] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.156883] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.163644] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.164289] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.181342] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.190452] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.191283] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.203001] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.203325] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.211655] tegradc 15210000.display: disp0 connected to head1->sor [ 6.219758] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.224522] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.230604] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.237399] tegradc 15210000.display: DT parsed successfully [ 6.252075] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.256903] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.269426] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.274695] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.283002] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.291497] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.298182] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.306139] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.313297] usb usb1: Product: xHCI Host Controller [ 6.317986] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.324163] usb usb1: SerialNumber: 3610000.xhci [ 6.330096] hub 1-0:1.0: USB hub found [ 6.332829] hub 1-0:1.0: 4 ports detected [ 6.337423] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.342477] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.349841] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.357821] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.365527] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.372720] usb usb2: Product: xHCI Host Controller [ 6.377929] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.384112] usb usb2: SerialNumber: 3610000.xhci [ 6.389899] hub 2-0:1.0: USB hub found [ 6.392310] hub 2-0:1.0: 4 ports detected [ 6.433438] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.438938] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.440281] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.440463] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.453703] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.454727] tegra194-cpufreq ccplex: probed with BWMGR [ 6.456018] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.456751] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.457355] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.458737] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.468012] mmc0: CQHCI version 5.10 [ 6.469458] tegra194-vi5 15c10000.vi: initialized [ 6.471136] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.472267] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.476178] generic_infoframe_type: 0x87 [ 6.476257] tegradc 15200000.display: DT parsed successfully [ 6.482971] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.486342] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.492128] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.514802] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.521399] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.527982] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.528006] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.540874] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.542636] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.544857] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.549115] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.557162] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.557583] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.565225] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.571860] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.572089] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.581151] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.587122] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.599259] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.619777] tegradc 15200000.display: probed [ 6.620843] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.624830] nvethernet 2490000.ethernet: Macsec not supported [ 6.650207] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.659146] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.663466] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.670711] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.678609] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.681660] mmc0: Command Queue Engine enabled [ 6.685150] tegra-se-nvhost 15810000.se: initialized [ 6.687805] mmc0: periodic cache flush enabled [ 6.697255] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.697630] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.704140] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.710336] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.714383] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.728356] Console: switching to colour frame buffer device 240x67 [ 6.728680] tegra-se-nvhost 15820000.se: initialized [ 6.734021] tegradc 15200000.display: fb registered [ 6.734109] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.740929] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.744996] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.749684] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.749902] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.750635] tegra-se-nvhost 15830000.se: initialized [ 6.751726] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.752248] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.752886] tegra-se-nvhost 15840000.se: initialized [ 6.754253] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.755726] tegra_actmon d230000.actmon: in actmon_register()... [ 6.755885] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.756217] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.756433] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.757001] hvc_sysfs: hypervisor is not present [ 6.783693] ALSA device list: [ 6.837781] No soundcards found. [ 6.851268] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.851501] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.856515] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.861308] usb 1-2: Manufacturer: Generic [ 6.867345] hub 1-2:1.0: USB hub found [ 6.870600] hub 1-2:1.0: 4 ports detected [ 6.901715] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.903091] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.903279] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.904225] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.904900] Extcon AUX1(HDMI) enable [ 6.908930] tegradc 15210000.display: disp1 connected to head1->sor [ 6.915030] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.922347] tegradc 15210000.display: DT parsed successfully [ 6.927580] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.935515] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.941812] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.954633] tegradc 15210000.display: probed [ 6.954950] tegradc 15210000.display: fb registered [ 6.960755] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.964393] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.965718] Freeing unused kernel memory: 3968K [ 6.972444] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.973697] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.990233] tegradc 15210000.display: blank - powerdown [ 6.990435] Run /init as init process [ 6.995368] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.995376] Extcon DP: HPD disabled [ 7.006998] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.007008] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.017519] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.026462] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.026468] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.026472] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.026476] usb 2-3: Manufacturer: Generic [ 7.037310] hub 2-3:1.0: USB hub found [ 7.060298] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.062918] tegradc 15200000.display: blank - powerdown [ 7.102093] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.102100] Extcon AUX1(HDMI) disable [ 7.108900] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.108906] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.109346] Root device found: mmcblk0p1 [ 7.111305] Found dev node: /dev/mmcblk0p1 [ 7.125843] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.126678] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.139825] tegradc 15200000.display: unblank [ 7.140871] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.141063] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.146852] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.147808] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.148716] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.151820] Rootfs mounted over mmcblk0p1 [ 7.152774] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.152778] Extcon AUX1(HDMI) enable [ 7.152869] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.165511] tegradc 15200000.display: sync windows ret = 247 [ 7.188711] Switching from initrd to actual rootfs [ 7.199956] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.204629] Extcon HDMI: HPD enabled [ 7.208035] tegradc 15200000.display: hdmi: plugged [ 7.302120] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.303556] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.304924] usb 1-3: Product: Bluetooth Radio [ 7.306210] usb 1-3: Manufacturer: Realtek [ 7.307488] usb 1-3: SerialNumber: 00e04c000001 [ 7.362451] systemd[1]: System time before build time, advancing clock. [ 7.433418] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.436089] random: crng init done [ 7.438444] systemd[1]: Detected architecture arm64. [ 7.476672] systemd[1]: Set hostname to . [ 7.642896] systemd-sysv-generator[249]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.999029] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.000748] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.006510] systemd[1]: Created slice system-modprobe.slice. [ 8.011180] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.015314] systemd[1]: Created slice User and Session Slice. [ 8.018906] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.023192] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.026705] systemd[1]: Reached target User and Group Name Lookups. [ 8.029999] systemd[1]: Reached target Slices. [ 8.033140] systemd[1]: Reached target Swap. [ 8.037147] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.040908] systemd[1]: Listening on Syslog Socket. [ 8.044504] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.047997] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.052258] systemd[1]: Listening on Journal Audit Socket. [ 8.055915] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.059708] systemd[1]: Listening on Journal Socket. [ 8.063404] systemd[1]: Listening on udev Control Socket. [ 8.066929] systemd[1]: Listening on udev Kernel Socket. [ 8.075271] systemd[1]: Mounting Huge Pages File System... [ 8.083573] systemd[1]: Mounting POSIX Message Queue File System... [ 8.091670] systemd[1]: Mounting RPC Pipe File System... [ 8.100561] systemd[1]: Mounting Kernel Debug File System... [ 8.109294] systemd[1]: Mounting Kernel Trace File System... [ 8.119325] systemd[1]: Starting Journal Service... [ 8.130021] systemd[1]: Starting Set the console keyboard layout... [ 8.139457] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.143053] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.149650] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.157637] systemd[1]: Started Nameserver information manager. [ 8.161957] systemd[1]: Reached target Network (Pre). [ 8.168993] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.169307] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.178981] systemd[1]: Starting Load Kernel Modules... [ 8.186932] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.196160] systemd[1]: Starting udev Coldplug all Devices... [ 8.206508] systemd[1]: Mounted Huge Pages File System. [ 8.210270] systemd[1]: Mounted POSIX Message Queue File System. [ 8.214139] systemd[1]: Mounted RPC Pipe File System. [ 8.217349] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.219375] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.221977] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.222467] systemd[1]: Mounted Kernel Debug File System. [ 8.223528] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.226590] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.228055] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.228323] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.229913] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.232958] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.232969] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.239189] systemd[1]: Mounted Kernel Trace File System. [ 8.246839] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.253986] systemd[1]: nvfb-udev.service: Succeeded. [ 8.258407] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.271675] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.277057] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.278927] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.293585] systemd[1]: Starting Load/Save Random Seed... [ 8.302601] systemd[1]: Starting Create System Users... [ 8.340361] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.340361] [ 8.353692] systemd[1]: Finished Load/Save Random Seed. [ 8.367473] systemd[1]: Finished Create System Users. [ 8.375526] systemd[1]: Finished Load Kernel Modules. [ 8.380608] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.388167] systemd[1]: Mounting Kernel Configuration File System... [ 8.396222] systemd[1]: Started OP-TEE Client Supplicant. [ 8.405699] systemd[1]: Starting Apply Kernel Variables... [ 8.415933] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.427454] systemd[1]: Finished Set the console keyboard layout. [ 8.432122] systemd[1]: Mounted Kernel Configuration File System. [ 10.020761] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.029454] imx219 9-0010: board setup failed [ 10.030736] imx219: probe of 9-0010 failed with error -121 [ 10.034252] hot-surface-alert cooling state: 0 -> 1 [ 10.073679] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.080041] imx219 10-0010: board setup failed [ 10.081470] imx219: probe of 10-0010 failed with error -121 [ 10.511983] using random self ethernet address [ 10.525802] using random host ethernet address [ 11.731856] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.734609] Creating 1 MTD partitions on "spi6.0": [ 11.735802] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.194151] using random self ethernet address [ 12.195338] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.814387] nvidia: loading out-of-tree module taints kernel. [ 58.975258] watchdog: watchdog0: watchdog did not stop! [ 59.441915] Trying to unregister non-registered hwtime source [ 62.509553] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.511443] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] tiÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.642] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 4096, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.727] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.743] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000744] Console: colour dummy device 80x25 [ 0.002220] printk: console [tty0] enabled [ 0.002284] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002320] pid_max: default: 32768 minimum: 301 [ 0.002484] LSM: Security Framework initializing [ 0.002569] Yama: becoming mindful. [ 0.002615] SELinux: Initializing. [ 0.002778] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002819] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005781] rcu: Hierarchical SRCU implementation. [ 0.006041] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006883] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006933] DTB Build time: Aug 10 2022 20:31:49 [ 0.010314] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010555] Remapping and enabling EFI services. [ 0.012632] smp: Bringing up secondary CPUs ... [ 0.041742] Detected PIPT I-cache on CPU1 [ 0.041847] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072897] Detected PIPT I-cache on CPU2 [ 0.073044] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102648] Detected PIPT I-cache on CPU3 [ 0.102789] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132560] Detected PIPT I-cache on CPU4 [ 0.132721] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162408] Detected PIPT I-cache on CPU5 [ 0.162603] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162930] smp: Brought up 1 node, 6 CPUs [ 0.163112] SMP: Total of 6 processors activated. [ 0.163184] CPU features: detected: Privileged Access Never [ 0.163211] CPU features: detected: LSE atomic instructions [ 0.163226] CPU features: detected: User Access Override [ 0.163240] CPU features: detected: 32-bit EL0 Support [ 0.163254] CPU features: detected: RAS Extension Support [ 0.163267] CPU features: detected: CRC32 instructions [ 0.163281] CPU features: detected: 32-bit EL1 Support [ 0.231987] CPU: All CPU(s) started at EL2 [ 0.237657] devtmpfs: initialized [ 0.312989] Registered cp15_barrier emulation handler [ 0.313103] Registered setend emulation handler [ 0.313137] KASLR enabled [ 0.313463] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.313501] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.315593] pinctrl core: initialized pinctrl subsystem [ 0.316889] SMBIOS 3.0.0 present. [ 0.316931] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.317800] NET: Registered protocol family 16 [ 0.320351] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.321079] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.322103] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.322185] audit: initializing netlink subsys (disabled) [ 0.322484] audit: type=2000 audit(0.316:1): state=initialized audit_enabled=0 res=1 [ 0.323095] thermal_sys: Registered thermal governor 'step_wise' [ 0.323107] thermal_sys: Registered thermal governor 'power_allocator' [ 0.323131] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.326750] cpuidle: using governor menu [ 0.327326] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.327890] ASID allocator initialised with 32768 entries [ 0.328186] Serial: AMBA PL011 UART driver [ 0.331653] Tegra reboot handler registered. [ 0.402208] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.402340] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.402570] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.402618] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.402739] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.402786] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.402902] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.402966] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.403109] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.403155] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.405339] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.405383] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.405417] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.405450] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.405496] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.405534] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.405564] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.405592] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.405624] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.405653] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.405682] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.405710] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.405739] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.405767] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.405794] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.405822] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.405849] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.405949] mc-err: mcerr ops are set to t19x [ 0.417573] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.417593] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.417605] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.417616] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.423681] ACPI: Interpreter disabled. [ 0.424796] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.426003] iommu: Default domain type: Translated [ 0.426091] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.426445] SCSI subsystem initialized [ 0.426603] usbcore: registered new interface driver usbfs [ 0.426640] usbcore: registered new interface driver hub [ 0.426674] usbcore: registered new device driver usb [ 0.427048] mc: Linux media interface: v0.10 [ 0.427075] videodev: Linux video capture interface: v2.00 [ 0.427375] pps_core: LinuxPPS API ver. 1 registered [ 0.427386] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.427406] PTP clock support registered [ 0.427600] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.427961] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.428046] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.428609] Registered efivars operations [ 0.434224] FPGA manager framework [ 0.434331] Advanced Linux Sound Architecture Driver Initialized. [ 0.434912] Bluetooth: Core ver 2.22 [ 0.434949] NET: Registered protocol family 31 [ 0.434960] Bluetooth: HCI device and connection manager initialized [ 0.434975] Bluetooth: HCI socket layer initialized [ 0.434986] Bluetooth: L2CAP socket layer initialized [ 0.435021] Bluetooth: SCO socket layer initialized [ 0.436589] camchar: rtcpu character device driver loaded [ 0.437183] clocksource: Switched to clocksource arch_sys_counter [ 0.774686] VFS: Disk quotas dquot_6.6.0 [ 0.774755] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.775113] pnp: PnP ACPI: disabled [ 0.787056] la/ptsa driver initialized. [ 0.787197] NET: Registered protocol family 2 [ 0.787360] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.794156] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.794275] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.794528] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.794964] TCP: Hash tables configured (established 65536 bind 65536) [ 0.795085] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.795173] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.795407] NET: Registered protocol family 1 [ 0.796254] RPC: Registered named UNIX socket transport module. [ 0.796281] RPC: Registered udp transport module. [ 0.796295] RPC: Registered tcp transport module. [ 0.796307] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.796329] PCI: CLS 0 bytes, default 64 [ 0.796598] Trying to unpack rootfs image as initramfs... [ 1.064824] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.068125] Freeing initrd memory: 8196K [ 1.072909] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.072944] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.072978] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.073378] kvm [1]: IPA Size Limit: 40 bits [ 1.073958] kvm [1]: vgic interrupt IRQ9 [ 1.074609] kvm [1]: VHE mode initialized successfully [ 1.076250] Initialise system trusted keyrings [ 1.076607] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.083393] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.084353] NFS: Registering the id_resolver key type [ 1.084389] Key type id_resolver registered [ 1.084403] Key type id_legacy registered [ 1.084498] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.084521] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.084558] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.094544] NET: Registered protocol family 38 [ 1.094566] Key type asymmetric registered [ 1.094581] Asymmetric key parser 'x509' registered [ 1.094673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.094952] io scheduler mq-deadline registered [ 1.095002] io scheduler kyber registered [ 1.101570] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.105146] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.105318] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.105412] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.105501] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.105589] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.112778] scrncapt: init (heads:4 wins:6 planes:4) [ 1.112899] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.114039] EINJ: ACPI disabled. [ 1.117673] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.117698] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.117713] tegra-pmc: ### PMC reset level: L1 [ 1.117754] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.117834] tegra-pmc: PMC Prod config success [ 1.123217] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.145056] random: fast init done [ 1.151875] printk: console [ttyTCU0] enabled [ 2.681408] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.685433] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.690156] arm-smmu 10000000.iommu: stage 1 translation [ 2.695679] arm-smmu 10000000.iommu: stage 2 translation [ 2.700931] arm-smmu 10000000.iommu: nested translation [ 2.706530] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.713445] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.723722] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.726812] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.733368] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.740642] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.746169] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.751133] arm-smmu 12000000.iommu: stage 1 translation [ 2.756382] arm-smmu 12000000.iommu: stage 2 translation [ 2.761831] arm-smmu 12000000.iommu: nested translation [ 2.767493] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.774424] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.784612] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.787809] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.794358] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.801841] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.811648] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.814534] tegra_profiler: auth: init [ 2.818822] THERMAL EST: found 3 subdevs [ 2.822458] THERMAL EST num_resources: 0 [ 2.826067] [THERMAL EST subdev 0] [ 2.829359] [THERMAL EST subdev 1] [ 2.833016] [THERMAL EST subdev 2] [ 2.836048] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.842752] THERMAL EST: thz register success. [ 2.846978] THERMAL EST: end of probe, return err: 0 [ 2.851987] nvsciipc: loaded module [ 2.858672] tun: Universal TUN/TAP device driver, 1.6 [ 2.861704] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.867812] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.873368] e1000e: Intel(R) PRO/1000 Network Driver [ 2.878285] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.884369] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.889910] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.896116] PPP generic driver version 2.4.2 [ 2.900352] PPP BSD Compression module registered [ 2.904657] PPP Deflate Compression module registered [ 2.909875] PPP MPPE Compression module registered [ 2.914895] usbcore: registered new interface driver r8152 [ 2.920397] usbcore: registered new interface driver asix [ 2.926011] usbcore: registered new interface driver ax88179_178a [ 2.932103] usbcore: registered new interface driver cdc_ether [ 2.938053] usbcore: registered new interface driver net1080 [ 2.943652] usbcore: registered new interface driver cdc_subset [ 2.949437] usbcore: registered new interface driver zaurus [ 2.955125] usbcore: registered new interface driver cdc_ncm [ 2.960808] usbcore: registered new interface driver aqc111 [ 2.966743] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.972798] ohci-pci: OHCI PCI platform driver [ 2.976844] ohci-platform: OHCI generic platform driver [ 2.982594] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.988915] usbcore: registered new interface driver uas [ 2.993147] usbcore: registered new interface driver usb-storage [ 2.999472] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.005477] mousedev: PS/2 mouse device common for all mice [ 3.010536] usbcore: registered new interface driver xpad [ 3.018268] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.020996] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.029081] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.035531] i2c /dev entries driver [ 3.038942] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.044454] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.049891] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.055191] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.060769] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.066014] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.071467] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.084038] device-mapper: uevent: version 1.0.3 [ 3.084489] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.091439] cpuidle: Initializing cpuidle driver [ 3.095744] sdhci: Secure Digital Host Controller Interface driver [ 3.100901] sdhci: Copyright(c) Pierre Ossman [ 3.104976] Synopsys Designware Multimedia Card Interface Driver [ 3.110902] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.116862] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.117500] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.130256] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.148433] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.157319] vdd-1v0: supplied by regulator-dummy [ 3.162684] vdd-1v8-hs: supplied by regulator-dummy [ 3.167334] vdd-1v8-ls: supplied by regulator-dummy [ 3.172003] vdd-1v8-ao: supplied by regulator-dummy [ 3.175806] vddio-ddr-1v1: supplied by regulator-dummy [ 3.180081] vdd-rtc: supplied by regulator-dummy [ 3.181675] spmic-ldo1: supplied by regulator-dummy [ 3.182757] vdd-ao-3v3: supplied by regulator-dummy [ 3.188807] vddio-emmc-3v3: supplied by regulator-dummy [ 3.194967] spmic-ldo4: supplied by regulator-dummy [ 3.196092] vdd-usb-3v3: supplied by regulator-dummy [ 3.202152] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.208165] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.213555] spmic-ldo8: supplied by vdd-1v8-ls [ 3.214870] gpio-510 (gpio_default): hogged as output/high [ 3.217112] gpio-511 (gpio_default): hogged as output/high [ 3.223986] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.362691] max77686-rtc max77620-rtc: registered as rtc0 [ 3.363910] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.364218] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.078599] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.079486] hid: raw HID events driver (C) Jiri Kosina [ 4.080111] usbcore: registered new interface driver usbhid [ 4.080250] usbhid: USB HID core driver [ 4.081959] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.083010] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.129314] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.205141] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 76.635 ms) ÿá[ 4.168592] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.169316] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.170458] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.171077] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.172757] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.173364] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.173970] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.175097] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.175426] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.177354] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.184660] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.191444] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.196452] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.203100] denver_knobs_init:MTS_VERSION:55637613 [ 4.214819] t19x_cache tegra-cache: probed [ 4.217326] optee: probing for conduit method. [ 4.218136] optee: revision 3.16 (65cc2218) [ 4.219145] optee: dynamic shared memory is enabled [ 4.223675] optee: initialized driver [ 4.230536] nvpmodel: initialized successfully [ 4.231257] tegra_hv: get_hvd: not initialized yet [ 4.235698] user_ivc_mempool: hypervisor not present [ 4.242031] usbcore: registered new interface driver snd-usb-audio [ 4.247932] u32 classifier [ 4.249749] input device check on [ 4.253355] Actions configured [ 4.256723] Initializing XFRM netlink socket [ 4.261852] NET: Registered protocol family 10 [ 4.267915] Segment Routing with IPv6 [ 4.268994] NET: Registered protocol family 17 [ 4.273584] NET: Registered protocol family 15 [ 4.277702] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.291144] Bluetooth: RFCOMM socket layer initialized [ 4.296014] Bluetooth: RFCOMM ver 1.11 [ 4.300084] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.305730] Bluetooth: HIDP socket layer initialized [ 4.311690] 9pnet: Installing 9P2000 support [ 4.315441] Key type dns_resolver registered [ 4.320302] registered taskstats version 1 [ 4.323814] Loading compiled-in X.509 certificates [ 4.335842] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.339800] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.349618] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.351495] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.360098] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.368516] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.485231] tegra194-pcie 14160000.pcie: Link up [ 4.488106] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.488375] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.488524] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.488755] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.488947] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.489361] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.489801] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.498816] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.499370] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.499869] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.501548] pci 0004:01:00.0: supports D1 D2 [ 4.501729] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.512277] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.512761] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.513007] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.513582] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.513820] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.514001] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.519802] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.527205] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.536045] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.546191] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.550955] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.556264] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.563125] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.571684] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.573958] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.582124] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.590952] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.697304] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.697916] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.698117] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.698264] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.698575] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.698772] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.699149] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.699553] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.713899] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.714333] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.716234] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.717965] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.719379] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.720846] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.721868] pci 0005:00:00.0: Removing from iommu group 7 [ 5.722126] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.752458] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.774126] host1x 13e10000.host1x: initialized [ 5.775585] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.776444] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.777885] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.778663] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.779687] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.780300] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.781460] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.782052] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.790621] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.797530] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.807436] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.814494] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.824487] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.831195] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.841590] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.848435] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.858457] falcon 15340000.vic: Adding to iommu group 17 [ 5.872632] falcon 15340000.vic: initialized [ 5.873761] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.879267] falcon 15380000.nvjpg: initialized [ 5.879833] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.890953] falcon 154c0000.nvenc: initialized [ 5.891486] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.901346] falcon 15a80000.nvenc1: initialized [ 5.901882] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.913295] nvdec 15480000.nvdec: initialized [ 5.913909] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.923424] nvdec 15140000.nvdec1: initialized [ 5.923974] tsec 15500000.tsec: Adding to iommu group 18 [ 5.929491] tsec 15500000.tsec: initialized [ 5.930018] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.938161] tsec 15100000.tsecb: initialized [ 5.941871] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.966146] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.977556] gpio-374 (wifi-enable): hogged as output/high [ 5.977869] gpio-431 (camera-control-output-low): hogged as output/low [ 5.978129] gpio-432 (camera-control-output-low): hogged as output/low [ 5.979705] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.981095] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.982665] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.989305] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.994876] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.000769] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.006269] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.014233] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.021732] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.032870] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.038432] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.044571] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.053157] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.062730] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.070029] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.077246] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.083468] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.093498] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.099388] pva 16000000.pva0: Adding to iommu group 22 [ 6.125035] pva 16000000.pva0: initialized [ 6.130123] pva 16800000.pva1: Adding to iommu group 23 [ 6.140420] pva 16800000.pva1: initialized [ 6.144886] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.158197] nvdla 15880000.nvdla0: initialized [ 6.159653] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.167947] nvdla 158c0000.nvdla1: initialized [ 6.170323] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.170595] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.170906] tegradccommon 15200000.display-hub: dma mapping done [ 6.172635] tegradc 15200000.display: Adding to iommu group 26 [ 6.180086] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.180473] generic_infoframe_type: 0x87 [ 6.180757] tegradc 15200000.display: DT parsed successfully [ 6.181066] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.189054] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.190247] tegradc 15210000.display: Adding to iommu group 26 [ 6.195802] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.208122] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.213470] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.213595] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.221422] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.221429] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.236038] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.243523] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.249574] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.261254] tegra_cec 3960000.tegra_cec: probed [ 6.266095] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.266816] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.284810] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.285884] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.296266] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.296657] kfuse 3830000.kfuse: initialized [ 6.305527] tegradc 15210000.display: disp0 connected to head1->sor [ 6.308003] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.314223] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.320286] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.327722] tegradc 15210000.display: DT parsed successfully [ 6.334502] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.339305] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.346265] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.363478] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.368932] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.377568] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.383211] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.403427] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.403793] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.406547] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.415270] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.423752] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.429890] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.437887] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.445066] usb usb1: Product: xHCI Host Controller [ 6.449772] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.456096] usb usb1: SerialNumber: 3610000.xhci [ 6.462022] hub 1-0:1.0: USB hub found [ 6.464604] hub 1-0:1.0: 4 ports detected [ 6.469300] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.474291] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.481630] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.489290] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.497490] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.504446] usb usb2: Product: xHCI Host Controller [ 6.509434] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.515643] usb usb2: SerialNumber: 3610000.xhci [ 6.521016] hub 2-0:1.0: USB hub found [ 6.524136] hub 2-0:1.0: 4 ports detected [ 6.564079] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.570358] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.571731] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.572009] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.585011] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.586081] tegra194-cpufreq ccplex: probed with BWMGR [ 6.587199] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.587962] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.588398] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.589694] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.599490] mmc0: CQHCI version 5.10 [ 6.601248] tegra194-vi5 15c10000.vi: initialized [ 6.602748] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.604226] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.608267] generic_infoframe_type: 0x87 [ 6.614489] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.618459] tegradc 15200000.display: DT parsed successfully [ 6.626540] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.631833] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.638317] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.638325] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.638330] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.666917] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.667562] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.672796] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.672803] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.693444] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.694609] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.710484] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.719343] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.719387] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.724767] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.724967] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.725215] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.739595] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.748738] nvethernet 2490000.ethernet: Macsec not supported [ 6.768564] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.776753] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.787181] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.788464] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.789139] ************************************** [ 6.789142] CPU:0, Error:cbb-noc [ 6.789151] Error Logger : 0 [ 6.794919] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.799298] ErrLog0 : 0x80030000 [ 6.799302] Transaction Type : RD - Read, Incrementing [ 6.799305] Error Code : SLV [ 6.799308] Error Source : Target [ 6.799317] Error Description : Target error detected by CBB slave [ 6.803130] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.806032] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.806059] Packet header Lock : 0 [ 6.806067] Packet header Len1 : 3 [ 6.814540] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.816964] NOC protocol version : version >= 2.7 [ 6.816972] ErrLog1 : 0x35242a [ 6.871912] ErrLog2 : 0x0 [ 6.874454] RouteId : 0x35242a [ 6.878125] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.882850] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.887837] TargSubRange : 18 [ 6.891249] SeqId : 0 [ 6.893723] ErrLog3 : 0x4045c [ 6.897119] ErrLog4 : 0x0 [ 6.900265] Address accessed : 0x15b4045c [ 6.904380] ErrLog5 : 0xa89f851 [ 6.907792] Non-Modify : 0x1 [ 6.911375] AXI ID : 0x15 [ 6.914527] Master ID : CCPLEX [ 6.917681] Security Group(GRPSEC): 0x7e [ 6.921881] Cache : 0x1 -- Bufferable [ 6.926081] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.932987] FALCONSEC : 0x0 [ 6.936138] Virtual Queuing Channel(VQC): 0x0 [ 6.940776] ************************************** [ 6.945815] ------------[ cut here ]------------ [ 6.950317] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.956620] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.962128] Modules linked in: [ 6.964854] CPU: 0 PID: 103 Comm: kworker/u12:2 Not tainted 5.10.104-tegra #1 [ 6.972017] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.984556] Workqueue: events_unbound async_run_entry_fn [ 6.990040] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.996080] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.000562] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.005531] sp : ffff800010003b30 [ 7.008599] x29: ffff800010003b30 x28: 0000000000000001 [ 7.014276] x27: 0000000000000005 x26: ffffabaee2603f58 [ 7.019699] x25: ffffabaee2f5ce10 x24: 0000000000000001 [ 7.025038] x23: ffffabaee28f7000 x22: ffffabaee2d7ea00 [ 7.030292] x21: 000000000000000f x20: ffff1cb400e92b80 [ 7.035718] x19: ffffabaee2d7ea00 x18: 0000000000000010 [ 7.041055] x17: 0000000000006270 x16: 0000000000000068 [ 7.046824] x15: ffff1cb402ef3f70 x14: 0720072007200720 [ 7.052080] x13: 0720072007200720 x12: 0720072007200720 [ 7.057674] x11: 0720072007200720 x10: 0720072007200720 [ 7.063187] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.068715] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.073955] x5 : 0000000000057fa8 x4 : ffffabaee2c07968 [ 7.079638] x3 : 00000000ffffffff x2 : ffffabaee109e090 [ 7.084974] x1 : ffff1cb402ef3a00 x0 : 0000000000010100 [ 7.090055] Call trace: [ 7.092767] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.097073] __handle_irq_event_percpu+0x68/0x2a0 [ 7.101603] handle_irq_event_percpu+0x40/0xa0 [ 7.106085] handle_irq_event+0x50/0xf0 [ 7.109573] handle_fasteoi_irq+0xc0/0x170 [ 7.113853] generic_handle_irq+0x40/0x60 [ 7.117877] __handle_domain_irq+0x70/0xd0 [ 7.122079] efi_header_end+0xb0/0xf0 [ 7.125580] el1_irq+0xd0/0x180 [ 7.128554] __do_softirq+0xb4/0x3e8 [ 7.132230] irq_exit+0xc0/0xe0 [ 7.135202] __handle_domain_irq+0x74/0xd0 [ 7.139226] efi_header_end+0xb0/0xf0 [ 7.142901] el1_irq+0xd0/0x180 [ 7.145901] tegra_hda_get_dev_id+0x6c/0x2b0 [ 7.149907] tegra_hda_init+0x234/0x440 [ 7.154102] tegra_dc_hdmi_init+0x820/0xb50 [ 7.157696] tegra_dc_set_out+0x2cc/0x480 [ 7.161823] tegra_dc_probe+0xa90/0x1570 [ 7.166003] platform_drv_probe+0x5c/0xb0 [ 7.170204] really_probe+0xf8/0x3d0 [ 7.173878] driver_probe_device+0x60/0xc0 [ 7.177991] __device_attach_driver+0x8c/0xd0 [ 7.182123] bus_for_each_drv+0x8c/0xe0 [ 7.185875] __device_attach_async_helper+0xc4/0xf0 [ 7.190771] async_run_entry_fn+0x4c/0x150 [ 7.194973] process_one_work+0x1c4/0x4a0 [ 7.199082] worker_thread+0x54/0x430 [ 7.203014] kthread+0x148/0x170 [ 7.206098] ret_from_fork+0x10/0x24 [ 7.209762] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.216165] ---[ end trace 1a90ac093976b12e ]--- [ 7.220520] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.228214] SMP: stopping secondary CPUs [ 7.231921] Kernel Offset: 0x2baed0ee0000 from 0xffff800010000000 [ 7.238274] PHYS_OFFSET: 0xffffe34d00000000 [ 7.242393] CPU features: 0x8240002,03802a30 [ 7.246505] Memory Limit: none [ 7.249830] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.030] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.337] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.338] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.338] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.352] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.585] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿänal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.204] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.205] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.206] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.213] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.222] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.253] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.262] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.271] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.280] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.311] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.320] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.329] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.338] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.369] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.378] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.387] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.396] GIC-SPI Target CPU: 0 [0003.399] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.429] initializing platform [0003.432] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.441] I> Bl_dtb @0xadf00000 [0003.444] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.493] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.519] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.530] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.538] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.569] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.645] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.647] I> width = 720, height = 480, frequency = 26973026 [0003.651] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.745] calling apps_init() [0003.746] starting app kernel_boot_app [0003.747] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000984] Console: colour dummy device 80x25 [ 0.002459] printk: console [tty0] enabled [ 0.002536] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002571] pid_max: default: 32768 minimum: 301 [ 0.002759] LSM: Security Framework initializing [ 0.002831] Yama: becoming mindful. [ 0.002891] SELinux: Initializing. [ 0.003039] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003090] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006449] rcu: Hierarchical SRCU implementation. [ 0.006698] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007607] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007649] DTB Build time: Aug 10 2022 20:31:49 [ 0.010562] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010953] Remapping and enabling EFI services. [ 0.013008] smp: Bringing up secondary CPUs ... [ 0.042479] Detected PIPT I-cache on CPU1 [ 0.042603] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075473] Detected PIPT I-cache on CPU2 [ 0.075629] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105186] Detected PIPT I-cache on CPU3 [ 0.105286] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134985] Detected PIPT I-cache on CPU4 [ 0.135083] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164785] Detected PIPT I-cache on CPU5 [ 0.164946] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165290] smp: Brought up 1 node, 6 CPUs [ 0.165501] SMP: Total of 6 processors activated. [ 0.165533] CPU features: detected: Privileged Access Never [ 0.165545] CPU features: detected: LSE atomic instructions [ 0.165557] CPU features: detected: User Access Override [ 0.165569] CPU features: detected: 32-bit EL0 Support [ 0.165581] CPU features: detected: RAS Extension Support [ 0.165593] CPU features: detected: CRC32 instructions [ 0.165605] CPU features: detected: 32-bit EL1 Support [ 0.233565] CPU: All CPU(s) started at EL2 [ 0.239411] devtmpfs: initialized [ 0.287010] Registered cp15_barrier emulation handler [ 0.287150] Registered setend emulation handler [ 0.287169] KASLR enabled [ 0.287508] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287535] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288905] pinctrl core: initialized pinctrl subsystem [ 0.289880] SMBIOS 3.0.0 present. [ 0.289909] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291520] NET: Registered protocol family 16 [ 0.293564] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.294063] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294765] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294826] audit: initializing netlink subsys (disabled) [ 0.295133] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.295541] thermal_sys: Registered thermal governor 'step_wise' [ 0.295547] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295560] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298907] cpuidle: using governor menu [ 0.299193] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299630] ASID allocator initialised with 32768 entries [ 0.299861] Serial: AMBA PL011 UART driver [ 0.303322] Tegra reboot handler registered. [ 0.376619] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.376750] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.376988] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.377039] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.377182] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.377221] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.377356] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.377410] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.377587] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.377627] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379710] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379746] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.379775] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379802] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379831] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379858] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379897] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379935] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379961] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379985] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.380009] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.380033] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.380073] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.380098] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.380138] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.380178] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.380204] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.380296] mc-err: mcerr ops are set to t19x [ 0.392359] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392380] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.392393] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392405] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.401079] ACPI: Interpreter disabled. [ 0.402806] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.404422] iommu: Default domain type: Translated [ 0.404521] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.405047] SCSI subsystem initialized [ 0.405259] usbcore: registered new interface driver usbfs [ 0.405322] usbcore: registered new interface driver hub [ 0.405377] usbcore: registered new device driver usb [ 0.405910] mc: Linux media interface: v0.10 [ 0.405977] videodev: Linux video capture interface: v2.00 [ 0.406421] pps_core: LinuxPPS API ver. 1 registered [ 0.406444] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.406482] PTP clock support registered [ 0.406799] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.407213] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.407322] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.408231] Registered efivars operations [ 0.415546] FPGA manager framework [ 0.415722] Advanced Linux Sound Architecture Driver Initialized. [ 0.416586] Bluetooth: Core ver 2.22 [ 0.416639] NET: Registered protocol family 31 [ 0.416656] Bluetooth: HCI device and connection manager initialized [ 0.416677] Bluetooth: HCI socket layer initialized [ 0.416694] Bluetooth: L2CAP socket layer initialized [ 0.416727] Bluetooth: SCO socket layer initialized [ 0.418663] camchar: rtcpu character device driver loaded [ 0.419650] clocksource: Switched to clocksource arch_sys_counter [ 0.830808] VFS: Disk quotas dquot_6.6.0 [ 0.830903] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.831386] pnp: PnP ACPI: disabled [ 0.846606] la/ptsa driver initialized. [ 0.846761] NET: Registered protocol family 2 [ 0.847022] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.855056] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.855154] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.855516] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.856206] TCP: Hash tables configured (established 65536 bind 65536) [ 0.856399] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.856537] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.856796] NET: Registered protocol family 1 [ 0.857737] RPC: Registered named UNIX socket transport module. [ 0.857771] RPC: Registered udp transport module. [ 0.857790] RPC: Registered tcp transport module. [ 0.857809] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.857853] PCI: CLS 0 bytes, default 64 [ 0.858208] Trying to unpack rootfs image as initramfs... [ 1.122501] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.125665] Freeing initrd memory: 8196K [ 1.130002] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.130063] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.130105] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.130465] kvm [1]: IPA Size Limit: 40 bits [ 1.130953] kvm [1]: vgic interrupt IRQ9 [ 1.131472] kvm [1]: VHE mode initialized successfully [ 1.133209] Initialise system trusted keyrings [ 1.133581] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.140017] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.140830] NFS: Registering the id_resolver key type [ 1.140862] Key type id_resolver registered [ 1.140877] Key type id_legacy registered [ 1.140963] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.140995] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.141063] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.151153] NET: Registered protocol family 38 [ 1.151175] Key type asymmetric registered [ 1.151190] Asymmetric key parser 'x509' registered [ 1.151239] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.151540] io scheduler mq-deadline registered [ 1.151560] io scheduler kyber registered [ 1.157772] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.160775] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.160880] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.160982] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.161051] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.161122] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.167224] scrncapt: init (heads:4 wins:6 planes:4) [ 1.167356] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.168403] EINJ: ACPI disabled. [ 1.171672] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.171696] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.171710] tegra-pmc: ### PMC reset level: L1 [ 1.171723] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.171766] tegra-pmc: PMC Prod config success [ 1.177310] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.184373] random: fast init done [ 1.194345] printk: console [ttyTCU0] enabled [ 2.734768] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.739298] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.743885] arm-smmu 10000000.iommu: stage 1 translation [ 2.749414] arm-smmu 10000000.iommu: stage 2 translation [ 2.754846] arm-smmu 10000000.iommu: nested translation [ 2.760218] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.767355] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.777231] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.780498] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.787045] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.794769] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.800341] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.805075] arm-smmu 12000000.iommu: stage 1 translation [ 2.810570] arm-smmu 12000000.iommu: stage 2 translation [ 2.815738] arm-smmu 12000000.iommu: nested translation [ 2.821424] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.828600] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.838233] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.841733] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.848030] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.855789] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.865669] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.868764] tegra_profiler: auth: init [ 2.872693] THERMAL EST: found 3 subdevs [ 2.876386] THERMAL EST num_resources: 0 [ 2.879965] [THERMAL EST subdev 0] [ 2.883276] [THERMAL EST subdev 1] [ 2.886958] [THERMAL EST subdev 2] [ 2.889951] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.896373] THERMAL EST: thz register success. [ 2.900904] THERMAL EST: end of probe, return err: 0 [ 2.905901] nvsciipc: loaded module [ 2.912485] tun: Universal TUN/TAP device driver, 1.6 [ 2.915577] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.921718] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.927630] e1000e: Intel(R) PRO/1000 Network Driver [ 2.932475] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.938298] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.943835] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.950140] PPP generic driver version 2.4.2 [ 2.954310] PPP BSD Compression module registered [ 2.958836] PPP Deflate Compression module registered [ 2.964066] PPP MPPE Compression module registered [ 2.968831] usbcore: registered new interface driver r8152 [ 2.974336] usbcore: registered new interface driver asix [ 2.979917] usbcore: registered new interface driver ax88179_178a [ 2.986033] usbcore: registered new interface driver cdc_ether [ 2.991733] usbcore: registered new interface driver net1080 [ 2.997577] usbcore: registered new interface driver cdc_subset [ 3.003359] usbcore: registered new interface driver zaurus [ 3.009319] usbcore: registered new interface driver cdc_ncm [ 3.014993] usbcore: registered new interface driver aqc111 [ 3.020723] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.026729] ohci-pci: OHCI PCI platform driver [ 3.031005] ohci-platform: OHCI generic platform driver [ 3.036476] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.043017] usbcore: registered new interface driver uas [ 3.047057] usbcore: registered new interface driver usb-storage [ 3.053115] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.059097] mousedev: PS/2 mouse device common for all mice [ 3.064459] usbcore: registered new interface driver xpad [ 3.072398] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.074980] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.082753] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.089193] i2c /dev entries driver [ 3.092867] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.098689] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.103899] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.109350] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.114411] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.119946] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.125614] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.138999] device-mapper: uevent: version 1.0.3 [ 3.139487] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.145859] cpuidle: Initializing cpuidle driver [ 3.150081] sdhci: Secure Digital Host Controller Interface driver [ 3.154808] sdhci: Copyright(c) Pierre Ossman [ 3.158908] Synopsys Designware Multimedia Card Interface Driver [ 3.165112] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.170812] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.171731] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.184378] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.204682] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.213969] vdd-1v0: supplied by regulator-dummy [ 3.219527] vdd-1v8-hs: supplied by regulator-dummy [ 3.224379] vdd-1v8-ls: supplied by regulator-dummy [ 3.229207] vdd-1v8-ao: supplied by regulator-dummy [ 3.233105] vddio-ddr-1v1: supplied by regulator-dummy [ 3.237552] vdd-rtc: supplied by regulator-dummy [ 3.239357] spmic-ldo1: supplied by regulator-dummy [ 3.240546] vdd-ao-3v3: supplied by regulator-dummy [ 3.246698] vddio-emmc-3v3: supplied by regulator-dummy [ 3.252975] spmic-ldo4: supplied by regulator-dummy [ 3.254178] vdd-usb-3v3: supplied by regulator-dummy [ 3.260439] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.266561] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.272085] spmic-ldo8: supplied by vdd-1v8-ls [ 3.273714] gpio-510 (gpio_default): hogged as output/high [ 3.275107] gpio-511 (gpio_default): hogged as output/high [ 3.278066] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.416853] max77686-rtc max77620-rtc: registered as rtc0 [ 3.417893] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.418219] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.243031] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.244237] hid: raw HID events driver (C) Jiri Kosina [ 4.245109] usbcore: registered new interface driver usbhid [ 4.245243] usbhid: USB HID core driver [ 4.247322] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.248713] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.220221] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.294449] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.037 ms) ÿá[ 4.332723] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.333250] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.334088] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.334776] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.336550] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.337419] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.338064] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.339806] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.340073] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.342816] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.349625] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.355776] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.360989] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.367266] denver_knobs_init:MTS_VERSION:55637613 [ 4.379953] t19x_cache tegra-cache: probed [ 4.383025] optee: probing for conduit method. [ 4.383963] optee: revision 3.16 (65cc2218) [ 4.385113] optee: dynamic shared memory is enabled [ 4.387925] optee: initialized driver [ 4.394584] nvpmodel: initialized successfully [ 4.395712] tegra_hv: get_hvd: not initialized yet [ 4.400312] user_ivc_mempool: hypervisor not present [ 4.406239] usbcore: registered new interface driver snd-usb-audio [ 4.412712] u32 classifier [ 4.414082] input device check on [ 4.417903] Actions configured [ 4.421289] Initializing XFRM netlink socket [ 4.426023] NET: Registered protocol family 10 [ 4.432895] Segment Routing with IPv6 [ 4.433476] NET: Registered protocol family 17 [ 4.437968] NET: Registered protocol family 15 [ 4.442091] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.455671] Bluetooth: RFCOMM socket layer initialized [ 4.460363] Bluetooth: RFCOMM ver 1.11 [ 4.464537] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.470126] Bluetooth: HIDP socket layer initialized [ 4.476027] 9pnet: Installing 9P2000 support [ 4.479520] Key type dns_resolver registered [ 4.485306] registered taskstats version 1 [ 4.488271] Loading compiled-in X.509 certificates [ 4.501289] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.504063] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.514255] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.515992] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.524766] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.533223] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.647698] tegra194-pcie 14160000.pcie: Link up [ 4.650579] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.650764] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.650941] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.651294] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.651623] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.651993] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.652634] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.665308] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.665774] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.666338] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.668172] pci 0004:01:00.0: supports D1 D2 [ 4.668376] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.679953] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.680266] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.680482] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.680836] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.681117] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.681333] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.682463] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.689912] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.698211] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.708233] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.713026] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.718672] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.725770] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.734641] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.736383] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.744569] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.753063] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.855789] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.856317] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.856532] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.856687] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.857047] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.857295] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.857653] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.858130] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.877957] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.878264] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.880228] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.881324] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.882665] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.884330] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.885406] pci 0005:00:00.0: Removing from iommu group 7 [ 5.885700] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.921953] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.946501] host1x 13e10000.host1x: initialized [ 5.948260] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.949191] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.950621] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.951267] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.952676] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.953423] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.954394] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.955081] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.956129] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.956869] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.965697] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.972903] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.982644] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.989887] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.999885] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.006699] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.016586] falcon 15340000.vic: Adding to iommu group 17 [ 6.031854] falcon 15340000.vic: initialized [ 6.033014] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.039158] falcon 15380000.nvjpg: initialized [ 6.039875] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.048831] falcon 154c0000.nvenc: initialized [ 6.049494] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.059408] falcon 15a80000.nvenc1: initialized [ 6.060063] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.072600] nvdec 15480000.nvdec: initialized [ 6.073123] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.083989] nvdec 15140000.nvdec1: initialized [ 6.084448] tsec 15500000.tsec: Adding to iommu group 18 [ 6.090433] tsec 15500000.tsec: initialized [ 6.090921] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.097029] tsec 15100000.tsecb: initialized [ 6.101120] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.128566] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.142740] gpio-374 (wifi-enable): hogged as output/high [ 6.143123] gpio-431 (camera-control-output-low): hogged as output/low [ 6.143357] gpio-432 (camera-control-output-low): hogged as output/low [ 6.145219] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.147148] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.147771] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.149078] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.153224] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.159006] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.164513] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.172840] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.180207] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.192133] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.196889] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.202753] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.211894] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.221081] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.228437] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.235774] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.242223] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.251552] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.257868] pva 16000000.pva0: Adding to iommu group 22 [ 6.286776] pva 16000000.pva0: initialized [ 6.291195] pva 16800000.pva1: Adding to iommu group 23 [ 6.302752] pva 16800000.pva1: initialized [ 6.306893] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.319573] nvdla 15880000.nvdla0: initialized [ 6.320995] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.330609] nvdla 158c0000.nvdla1: initialized [ 6.334292] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.334704] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.335050] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.335108] tegradc 15200000.display: Adding to iommu group 26 [ 6.335136] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.336353] tegradccommon 15200000.display-hub: dma mapping done [ 6.336808] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.342324] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.343880] tegradc 15210000.display: Adding to iommu group 26 [ 6.344304] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.344470] generic_infoframe_type: 0x87 [ 6.344598] tegradc 15200000.display: DT parsed successfully [ 6.344715] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.347998] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.354461] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.359689] tegra_cec 3960000.tegra_cec: probed [ 6.360940] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.363821] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.372163] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.377662] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.379123] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.384012] kfuse 3830000.kfuse: initialized [ 6.391584] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.396906] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.403552] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.410124] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.420858] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.425759] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.431669] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.436587] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.444121] tegradc 15210000.display: disp0 connected to head1->sor [ 6.449891] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.458887] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.478137] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.485563] tegradc 15210000.display: DT parsed successfully [ 6.495708] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.500607] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.522536] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.562372] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.562797] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.565726] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.573932] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.582510] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.589383] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.596546] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.603966] usb usb1: Product: xHCI Host Controller [ 6.609034] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.615379] usb usb1: SerialNumber: 3610000.xhci [ 6.620969] hub 1-0:1.0: USB hub found [ 6.623719] hub 1-0:1.0: 4 ports detected [ 6.628671] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.633038] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.640900] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.648455] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.656477] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.663727] usb usb2: Product: xHCI Host Controller [ 6.668464] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.674664] usb usb2: SerialNumber: 3610000.xhci [ 6.680292] hub 2-0:1.0: USB hub found [ 6.683347] hub 2-0:1.0: 4 ports detected [ 6.723497] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.730209] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.731548] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.731813] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.744446] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.745504] tegra194-cpufreq ccplex: probed with BWMGR [ 6.746752] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.747181] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.747690] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.748815] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.757873] mmc0: CQHCI version 5.10 [ 6.758996] tegra194-vi5 15c10000.vi: initialized [ 6.762050] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.763443] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.767392] generic_infoframe_type: 0x87 [ 6.773730] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.777380] tegradc 15200000.display: DT parsed successfully [ 6.785287] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.790843] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.797594] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.797604] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.804439] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.805986] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.812120] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.819669] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.826290] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.826294] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.826647] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.834549] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.840910] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.847736] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.855923] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.865128] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.870908] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.882729] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.884301] random: crng init done [ 6.885836] tegradc 15200000.display: probed [ 6.906432] mmc0: Command Queue Engine enabled [ 6.908245] nvethernet 2490000.ethernet: Macsec not supported [ 6.941241] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.941270] mmc0: periodic cache flush enabled [ 6.941312] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.941394] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.941534] Console: switching to colour frame buffer device 240x67 [ 6.942346] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.942786] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.942907] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.943021] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.944329] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.948207] tegradc 15200000.display: fb registered [ 6.948301] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.952578] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.003988] tegra-se-nvhost 15810000.se: initialized [ 7.009733] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.036639] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.037155] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.045305] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.047048] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.059836] tegra-se-nvhost 15820000.se: initialized [ 7.066101] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.070539] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.077045] tegra-se-nvhost 15830000.se: initialized [ 7.082715] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.087809] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.094409] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.094576] tegra-se-nvhost 15840000.se: initialized [ 7.103899] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.109305] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.115490] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.116190] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.123040] tegra_actmon d230000.actmon: in actmon_register()... [ 7.129232] Extcon AUX1(HDMI) enable [ 7.129373] tegradc 15210000.display: disp1 connected to head1->sor [ 7.142584] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.146344] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.158136] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.165063] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.165153] tegradc 15210000.display: DT parsed successfully [ 7.165194] tegradc 15210000.display: Display dc.0000000095012db9 registered with id=1 [ 7.165294] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.165299] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.173537] hvc_sysfs: hypervisor is not present [ 7.181313] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.219339] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.224288] usb 1-2: Manufacturer: Generic [ 7.230491] hub 1-2:1.0: USB hub found [ 7.233603] hub 1-2:1.0: 4 ports detected [ 7.248556] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.259809] ALSA device list: [ 7.259882] No soundcards found. [ 7.262479] tegradc 15210000.display: probed [ 7.262805] tegradc 15210000.display: fb registered [ 7.266293] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.267006] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.273350] Freeing unused kernel memory: 3968K [ 7.274759] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.284590] tegradc 15210000.display: blank - powerdown [ 7.289956] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.291724] Run /init as init process [ 7.297861] Extcon DP: HPD disabled ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.305151] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.305165] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.305170] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.305243] tegradc 15200000.display: blank - powerdown [ 7.312948] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.312953] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.312958] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.312961] usb 2-3: Manufacturer: Generic [ 7.323650] hub 2-3:1.0: USB hub found [ 7.325478] hub 2-3:1.0: 4 ports detected [ 7.344830] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.344834] Extcon AUX1(HDMI) disable [ 7.359646] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.359651] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.368152] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.369004] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.381985] tegradc 15200000.display: unblank [ 7.383101] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.383293] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.389457] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.391323] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.395309] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.395313] Extcon AUX1(HDMI) enable [ 7.408073] tegradc 15200000.display: sync windows ret = 246 [ 7.431651] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.466283] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.473422] Extcon HDMI: HPD enabled [ 7.476830] tegradc 15200000.display: hdmi: plugged [ 7.515654] Root device found: mmcblk0p1 [ 7.519067] Found dev node: /dev/mmcblk0p1 [ 7.554649] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.560161] Rootfs mounted over mmcblk0p1 [ 7.589959] Switching from initrd to actual rootfs [ 7.616713] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.618119] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.619451] usb 1-3: Product: Bluetooth Radio [ 7.620802] usb 1-3: Manufacturer: Realtek [ 7.622027] usb 1-3: SerialNumber: 00e04c000001 [ 7.760454] systemd[1]: System time before build time, advancing clock. [ 7.830161] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.835072] systemd[1]: Detected architecture arm64. [ 7.883759] systemd[1]: Set hostname to . [ 8.047675] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.391733] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.393423] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.398899] systemd[1]: Created slice system-modprobe.slice. [ 8.403690] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.407823] systemd[1]: Created slice User and Session Slice. [ 8.411296] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.415355] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.418919] systemd[1]: Reached target User and Group Name Lookups. [ 8.422129] systemd[1]: Reached target Slices. [ 8.425101] systemd[1]: Reached target Swap. [ 8.428978] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.432560] systemd[1]: Listening on Syslog Socket. [ 8.435980] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.439178] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.443320] systemd[1]: Listening on Journal Audit Socket. [ 8.446843] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.450587] systemd[1]: Listening on Journal Socket. [ 8.454265] systemd[1]: Listening on udev Control Socket. [ 8.457716] systemd[1]: Listening on udev Kernel Socket. [ 8.466218] systemd[1]: Mounting Huge Pages File System... [ 8.476181] systemd[1]: Mounting POSIX Message Queue File System... [ 8.485724] systemd[1]: Mounting RPC Pipe File System... [ 8.494288] systemd[1]: Mounting Kernel Debug File System... [ 8.502756] systemd[1]: Mounting Kernel Trace File System... [ 8.512604] systemd[1]: Starting Journal Service... [ 8.521273] systemd[1]: Starting Set the console keyboard layout... [ 8.529404] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.532904] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.539215] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.547177] systemd[1]: Started Nameserver information manager. [ 8.552377] systemd[1]: Reached target Network (Pre). [ 8.559447] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.561310] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.569428] systemd[1]: Starting Load Kernel Modules... [ 8.577128] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.586015] systemd[1]: Starting udev Coldplug all Devices... [ 8.596117] systemd[1]: Mounted Huge Pages File System. [ 8.599788] systemd[1]: Mounted POSIX Message Queue File System. [ 8.603314] systemd[1]: Mounted RPC Pipe File System. [ 8.606991] systemd[1]: Mounted Kernel Debug File System. [ 8.607856] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.610116] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.610549] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.610558] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.610566] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.610569] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.611224] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.611405] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.611550] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.611560] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.632326] systemd[1]: Mounted Kernel Trace File System. [ 8.641400] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.646242] systemd[1]: nvfb-udev.service: Succeeded. [ 8.650347] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.662859] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.675378] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.677536] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.683726] systemd[1]: Starting Load/Save Random Seed... [ 8.692819] systemd[1]: Starting Create System Users... [ 8.710975] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.710975] [ 8.744886] systemd[1]: Finished Load/Save Random Seed. [ 8.751924] systemd[1]: Finished Load Kernel Modules. [ 8.756574] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.763025] systemd[1]: Mounting Kernel Configuration File System... [ 8.771826] systemd[1]: Started OP-TEE Client Supplicant. [ 8.780559] systemd[1]: Starting Apply Kernel Variables... [ 8.790195] systemd[1]: Finished Set the console keyboard layout. [ 8.794444] systemd[1]: Mounted Kernel Configuration File System. [ 8.805486] systemd[1]: Finished Create System Users. [ 10.158137] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.163521] imx219 9-0010: board setup failed [ 10.163653] imx219: probe of 9-0010 failed with error -121 [ 10.174759] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.182719] imx219 10-0010: board setup failed [ 10.187080] imx219: probe of 10-0010 failed with error -121 [ 10.242019] hot-surface-alert cooling state: 0 -> 1 [ 10.831702] using random self ethernet address [ 10.833439] using random host ethernet address [ 12.002617] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.004442] Creating 1 MTD partitions on "spi6.0": [ 12.006145] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.301768] using random self ethernet address [ 12.303349] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.836042] nvidia: loading out-of-tree module taints kernel. [ 59.209369] watchdog: watchdog0: watchdog did not stop! [ 59.680373] Trying to unregister non-registered hwtime source [ 62.738429] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.740059] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.055] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.077] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/Tÿâclk_early initialized ÿäC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized cvc initialized ÿä:20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuration miÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized entering main console loop ] bpmp: init complete ÿäght be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.647] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.648] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.649] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.681] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 4096, height = 2160, frequency = 296703296 [0003.721] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.748] calling apps_init() [0003.748] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000712] Console: colour dummy device 80x25 [ 0.002245] printk: console [tty0] enabled [ 0.002321] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002357] pid_max: default: 32768 minimum: 301 [ 0.002533] LSM: Security Framework initializing [ 0.002604] Yama: becoming mindful. [ 0.002663] SELinux: Initializing. [ 0.002815] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002878] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006499] rcu: Hierarchical SRCU implementation. [ 0.006781] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007759] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007794] DTB Build time: Aug 10 2022 20:31:49 [ 0.010522] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010746] Remapping and enabling EFI services. [ 0.012883] smp: Bringing up secondary CPUs ... [ 0.042057] Detected PIPT I-cache on CPU1 [ 0.042164] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071656] Detected PIPT I-cache on CPU2 [ 0.071804] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101388] Detected PIPT I-cache on CPU3 [ 0.101480] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131219] Detected PIPT I-cache on CPU4 [ 0.131385] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161123] Detected PIPT I-cache on CPU5 [ 0.161275] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161659] smp: Brought up 1 node, 6 CPUs [ 0.161859] SMP: Total of 6 processors activated. [ 0.161924] CPU features: detected: Privileged Access Never [ 0.161967] CPU features: detected: LSE atomic instructions [ 0.161982] CPU features: detected: User Access Override [ 0.161996] CPU features: detected: 32-bit EL0 Support [ 0.162009] CPU features: detected: RAS Extension Support [ 0.162022] CPU features: detected: CRC32 instructions [ 0.162037] CPU features: detected: 32-bit EL1 Support [ 0.230644] CPU: All CPU(s) started at EL2 [ 0.236444] devtmpfs: initialized [ 0.284706] Registered cp15_barrier emulation handler [ 0.284841] Registered setend emulation handler [ 0.284862] KASLR enabled [ 0.285192] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285221] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286544] pinctrl core: initialized pinctrl subsystem [ 0.287592] SMBIOS 3.0.0 present. [ 0.287620] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289266] NET: Registered protocol family 16 [ 0.291132] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291859] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292770] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292835] audit: initializing netlink subsys (disabled) [ 0.293145] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293620] thermal_sys: Registered thermal governor 'step_wise' [ 0.293627] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293643] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.296109] cpuidle: using governor menu [ 0.296401] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296912] ASID allocator initialised with 32768 entries [ 0.297132] Serial: AMBA PL011 UART driver [ 0.300381] Tegra reboot handler registered. [ 0.374003] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.374115] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.374318] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.374365] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.374541] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.374579] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.374695] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.374733] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.374881] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.374937] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.377045] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.377077] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.377105] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.377131] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.377158] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.377184] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.377239] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.377271] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.377312] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.377336] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.377377] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.377401] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.377424] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.377446] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.377474] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.377498] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.377521] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.377607] mc-err: mcerr ops are set to t19x [ 0.391076] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391100] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.391112] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391124] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397931] ACPI: Interpreter disabled. [ 0.399175] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400443] iommu: Default domain type: Translated [ 0.400511] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400964] SCSI subsystem initialized [ 0.401178] usbcore: registered new interface driver usbfs [ 0.401233] usbcore: registered new interface driver hub [ 0.401286] usbcore: registered new device driver usb [ 0.401742] mc: Linux media interface: v0.10 [ 0.401774] videodev: Linux video capture interface: v2.00 [ 0.402147] pps_core: LinuxPPS API ver. 1 registered [ 0.402161] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.402182] PTP clock support registered [ 0.402431] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.402838] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.402891] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.403570] Registered efivars operations [ 0.408888] FPGA manager framework [ 0.409025] Advanced Linux Sound Architecture Driver Initialized. [ 0.409630] Bluetooth: Core ver 2.22 [ 0.409667] NET: Registered protocol family 31 [ 0.409678] Bluetooth: HCI device and connection manager initialized [ 0.409693] Bluetooth: HCI socket layer initialized [ 0.409708] Bluetooth: L2CAP socket layer initialized [ 0.409731] Bluetooth: SCO socket layer initialized [ 0.411297] camchar: rtcpu character device driver loaded [ 0.412048] clocksource: Switched to clocksource arch_sys_counter [ 0.717842] VFS: Disk quotas dquot_6.6.0 [ 0.717910] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.718285] pnp: PnP ACPI: disabled [ 0.731254] la/ptsa driver initialized. [ 0.731375] NET: Registered protocol family 2 [ 0.731544] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.736142] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.736211] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.736503] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.736928] TCP: Hash tables configured (established 65536 bind 65536) [ 0.737050] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.737139] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.737321] NET: Registered protocol family 1 [ 0.737843] RPC: Registered named UNIX socket transport module. [ 0.737856] RPC: Registered udp transport module. [ 0.737864] RPC: Registered tcp transport module. [ 0.737872] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.737897] PCI: CLS 0 bytes, default 64 [ 0.738086] Trying to unpack rootfs image as initramfs... [ 0.923063] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.925340] Freeing initrd memory: 8196K [ 0.929856] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.929893] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.929933] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.930365] kvm [1]: IPA Size Limit: 40 bits [ 0.930869] kvm [1]: vgic interrupt IRQ9 [ 0.931411] kvm [1]: VHE mode initialized successfully [ 0.933376] Initialise system trusted keyrings [ 0.933701] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.942454] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.943431] NFS: Registering the id_resolver key type [ 0.943505] Key type id_resolver registered [ 0.943521] Key type id_legacy registered [ 0.943624] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.943647] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.943683] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.954521] NET: Registered protocol family 38 [ 0.954545] Key type asymmetric registered [ 0.954588] Asymmetric key parser 'x509' registered [ 0.954655] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.954917] io scheduler mq-deadline registered [ 0.954935] io scheduler kyber registered [ 0.962088] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.965544] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.965632] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.965705] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.965775] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.965844] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.971687] scrncapt: init (heads:4 wins:6 planes:4) [ 0.971860] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.972937] EINJ: ACPI disabled. [ 0.976746] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.976771] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.976785] tegra-pmc: ### PMC reset level: L1 [ 0.976798] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.976844] tegra-pmc: PMC Prod config success [ 0.982871] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.989071] random: fast init done [ 0.989196] printk: console [ttyTCU0] enabled [ 2.540999] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.545349] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.549991] arm-smmu 10000000.iommu: stage 1 translation [ 2.555690] arm-smmu 10000000.iommu: stage 2 translation [ 2.560927] arm-smmu 10000000.iommu: nested translation [ 2.566530] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.573453] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.584987] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.586524] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.593107] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.601351] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.606149] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.611130] arm-smmu 12000000.iommu: stage 1 translation [ 2.616638] arm-smmu 12000000.iommu: stage 2 translation [ 2.622063] arm-smmu 12000000.iommu: nested translation [ 2.627492] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.634671] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.646021] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.647510] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.654355] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.661688] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.671541] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.674632] tegra_profiler: auth: init [ 2.678760] THERMAL EST: found 3 subdevs [ 2.682192] THERMAL EST num_resources: 0 [ 2.686296] [THERMAL EST subdev 0] [ 2.689615] [THERMAL EST subdev 1] [ 2.692770] [THERMAL EST subdev 2] [ 2.696267] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.702509] THERMAL EST: thz register success. [ 2.706716] THERMAL EST: end of probe, return err: 0 [ 2.712132] nvsciipc: loaded module [ 2.719630] tun: Universal TUN/TAP device driver, 1.6 [ 2.721942] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.727796] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.733382] e1000e: Intel(R) PRO/1000 Network Driver [ 2.738528] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.744608] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.749679] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.756162] PPP generic driver version 2.4.2 [ 2.760113] PPP BSD Compression module registered [ 2.764628] PPP Deflate Compression module registered [ 2.769863] PPP MPPE Compression module registered [ 2.775145] usbcore: registered new interface driver r8152 [ 2.780390] usbcore: registered new interface driver asix [ 2.785983] usbcore: registered new interface driver ax88179_178a [ 2.792104] usbcore: registered new interface driver cdc_ether [ 2.797794] usbcore: registered new interface driver net1080 [ 2.803435] usbcore: registered new interface driver cdc_subset [ 2.809460] usbcore: registered new interface driver zaurus [ 2.815134] usbcore: registered new interface driver cdc_ncm [ 2.820814] usbcore: registered new interface driver aqc111 [ 2.826484] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.832827] ohci-pci: OHCI PCI platform driver [ 2.836855] ohci-platform: OHCI generic platform driver [ 2.842708] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.849394] usbcore: registered new interface driver uas [ 2.853129] usbcore: registered new interface driver usb-storage [ 2.859522] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.865413] mousedev: PS/2 mouse device common for all mice [ 2.870534] usbcore: registered new interface driver xpad [ 2.878690] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.881069] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.889114] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.895695] i2c /dev entries driver [ 2.898955] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.904848] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.909989] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.915556] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.920864] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.926354] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.931515] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.945697] device-mapper: uevent: version 1.0.3 [ 2.946154] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.952412] cpuidle: Initializing cpuidle driver [ 2.956310] sdhci: Secure Digital Host Controller Interface driver [ 2.960876] sdhci: Copyright(c) Pierre Ossman [ 2.964719] Synopsys Designware Multimedia Card Interface Driver [ 2.970986] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.977237] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.977964] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.990150] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.009511] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.018770] vdd-1v0: supplied by regulator-dummy [ 3.024280] vdd-1v8-hs: supplied by regulator-dummy [ 3.029150] vdd-1v8-ls: supplied by regulator-dummy [ 3.033982] vdd-1v8-ao: supplied by regulator-dummy [ 3.037878] vddio-ddr-1v1: supplied by regulator-dummy [ 3.042324] vdd-rtc: supplied by regulator-dummy [ 3.043991] spmic-ldo1: supplied by regulator-dummy [ 3.045251] vdd-ao-3v3: supplied by regulator-dummy [ 3.051539] vddio-emmc-3v3: supplied by regulator-dummy [ 3.057707] spmic-ldo4: supplied by regulator-dummy [ 3.058979] vdd-usb-3v3: supplied by regulator-dummy [ 3.065086] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.071236] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.076818] spmic-ldo8: supplied by vdd-1v8-ls [ 3.078194] gpio-510 (gpio_default): hogged as output/high [ 3.079517] gpio-511 (gpio_default): hogged as output/high [ 3.083837] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.222806] max77686-rtc max77620-rtc: registered as rtc0 [ 3.224117] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.224448] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.961504] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.962818] hid: raw HID events driver (C) Jiri Kosina [ 3.963753] usbcore: registered new interface driver usbhid [ 3.963903] usbhid: USB HID core driver [ 3.966127] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.967546] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.984571] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.058296] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.533 ms) ÿá[ 4.051534] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.052242] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.053449] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.054235] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.056164] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.056807] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.057411] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.059124] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.059357] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.062134] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.067983] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.074380] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.079497] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.085606] denver_knobs_init:MTS_VERSION:55637613 [ 4.097485] t19x_cache tegra-cache: probed [ 4.100701] optee: probing for conduit method. [ 4.101596] optee: revision 3.16 (65cc2218) [ 4.102658] optee: dynamic shared memory is enabled [ 4.106448] optee: initialized driver [ 4.113601] nvpmodel: initialized successfully [ 4.114162] tegra_hv: get_hvd: not initialized yet [ 4.118850] user_ivc_mempool: hypervisor not present [ 4.124955] usbcore: registered new interface driver snd-usb-audio [ 4.130959] u32 classifier [ 4.132537] input device check on [ 4.136255] Actions configured [ 4.139642] Initializing XFRM netlink socket [ 4.144750] NET: Registered protocol family 10 [ 4.152291] Segment Routing with IPv6 [ 4.152695] NET: Registered protocol family 17 [ 4.156311] NET: Registered protocol family 15 [ 4.160860] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.174630] Bluetooth: RFCOMM socket layer initialized [ 4.179202] Bluetooth: RFCOMM ver 1.11 [ 4.182778] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.188612] Bluetooth: HIDP socket layer initialized [ 4.194787] 9pnet: Installing 9P2000 support [ 4.198103] Key type dns_resolver registered [ 4.203951] registered taskstats version 1 [ 4.206767] Loading compiled-in X.509 certificates [ 4.220583] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.222705] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.233498] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.234368] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.243288] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.251608] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.368237] tegra194-pcie 14160000.pcie: Link up [ 4.371050] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.371340] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.371506] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.371738] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.371970] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.372478] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.372942] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.387684] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.388330] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.388764] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.390280] pci 0004:01:00.0: supports D1 D2 [ 4.390431] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.400339] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.400720] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.400985] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.401365] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.401633] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.401818] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.403004] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.410484] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.418987] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.429051] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.434168] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.439551] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.446376] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.456224] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.456873] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.465109] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.473840] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.589256] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.589948] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.590162] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.590338] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.590620] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.590851] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.591262] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.591657] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.611255] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.611566] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.613889] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.615534] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.617786] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.619417] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.620454] pci 0005:00:00.0: Removing from iommu group 7 [ 5.620719] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.651570] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.674130] host1x 13e10000.host1x: initialized [ 5.675883] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.677146] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.678473] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.679214] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.680614] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.681258] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.682299] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.682901] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.683814] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.689636] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.699598] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.706409] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.716996] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.723716] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.733447] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.740484] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.749963] falcon 15340000.vic: Adding to iommu group 17 [ 5.764310] falcon 15340000.vic: initialized [ 5.765348] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.771182] falcon 15380000.nvjpg: initialized [ 5.772479] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.783848] falcon 154c0000.nvenc: initialized [ 5.784759] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.793489] falcon 15a80000.nvenc1: initialized [ 5.794278] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.805548] nvdec 15480000.nvdec: initialized [ 5.806257] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.816262] nvdec 15140000.nvdec1: initialized [ 5.816816] tsec 15500000.tsec: Adding to iommu group 18 [ 5.822806] tsec 15500000.tsec: initialized [ 5.823316] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.830508] tsec 15100000.tsecb: initialized [ 5.834863] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.858727] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.871831] gpio-374 (wifi-enable): hogged as output/high [ 5.872248] gpio-431 (camera-control-output-low): hogged as output/low [ 5.872565] gpio-432 (camera-control-output-low): hogged as output/low [ 5.874031] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.875644] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.876399] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.881481] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.886843] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.892874] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.898034] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.907539] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.913876] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.926103] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.930629] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.936369] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.945397] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.954420] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.961899] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.969670] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.975492] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.985612] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.991592] pva 16000000.pva0: Adding to iommu group 22 [ 6.017609] pva 16000000.pva0: initialized [ 6.022763] pva 16800000.pva1: Adding to iommu group 23 [ 6.033799] pva 16800000.pva1: initialized [ 6.039476] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.060526] nvdla 15880000.nvdla0: initialized [ 6.062119] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.077940] nvdla 158c0000.nvdla1: initialized [ 6.080822] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.081082] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.081373] tegradccommon 15200000.display-hub: dma mapping done [ 6.083681] tegradc 15200000.display: Adding to iommu group 26 [ 6.091996] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.092664] generic_infoframe_type: 0x87 [ 6.092890] tegradc 15200000.display: DT parsed successfully [ 6.093165] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.095729] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.096133] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.096989] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.098607] tegradc 15210000.display: Adding to iommu group 26 [ 6.101948] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.116243] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.116478] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.124875] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.130473] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.135344] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.137061] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.141658] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.151694] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.158059] tegra_cec 3960000.tegra_cec: probed [ 6.165029] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.171850] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.178039] tegradc 15210000.display: disp0 connected to head1->sor [ 6.185054] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.188514] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.195081] kfuse 3830000.kfuse: initialized [ 6.201553] tegradc 15210000.display: DT parsed successfully [ 6.209201] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.213039] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.232639] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.240199] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.246202] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.256495] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.260742] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.270580] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.275757] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.296163] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.296544] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.298797] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.306720] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.315423] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.322138] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.329587] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.336754] usb usb1: Product: xHCI Host Controller [ 6.342014] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.348277] usb usb1: SerialNumber: 3610000.xhci [ 6.354103] hub 1-0:1.0: USB hub found [ 6.356951] hub 1-0:1.0: 4 ports detected [ 6.361552] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.366258] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.373847] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.381253] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.389486] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.396441] usb usb2: Product: xHCI Host Controller [ 6.401653] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.407902] usb usb2: SerialNumber: 3610000.xhci [ 6.413148] hub 2-0:1.0: USB hub found [ 6.416518] hub 2-0:1.0: 4 ports detected [ 6.458686] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.464897] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.466249] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.466429] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.479668] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.480779] tegra194-cpufreq ccplex: probed with BWMGR [ 6.482043] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.482514] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.482960] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.484393] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.493431] tegra194-vi5 15c10000.vi: initialized [ 6.494013] mmc0: CQHCI version 5.10 [ 6.494415] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.495768] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.500240] generic_infoframe_type: 0x87 [ 6.506695] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.510379] tegradc 15200000.display: DT parsed successfully [ 6.518252] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.523083] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.524044] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.530287] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.538660] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.546237] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.552766] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.552770] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.553106] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.561344] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.568064] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.575757] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.583864] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.590267] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.596524] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.632046] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.641066] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.641771] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.647589] nvethernet 2490000.ethernet: Macsec not supported [ 6.660807] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.668816] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.679181] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.680533] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.680849] ************************************** [ 6.680858] CPU:0, Error:cbb-noc [ 6.686681] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.691523] Error Logger : 0 [ 6.691535] ErrLog0 : 0x80030000 [ 6.691538] Transaction Type : RD - Read, Incrementing [ 6.691545] Error Code : SLV [ 6.694972] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.702280] Error Source : Target [ 6.702284] Error Description : Target error detected by CBB slave [ 6.702295] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.702321] Packet header Lock : 0 [ 6.706509] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.708762] Packet header Len1 : 3 [ 6.708766] NOC protocol version : version >= 2.7 [ 6.708769] ErrLog1 : 0x352422 [ 6.708772] ErrLog2 : 0x0 [ 6.708775] RouteId : 0x352422 [ 6.708778] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.708781] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.708784] TargSubRange : 18 [ 6.708787] SeqId : 0 [ 6.708790] ErrLog3 : 0x4045c [ 6.708793] ErrLog4 : 0x0 [ 6.791888] Address accessed : 0x15b4045c [ 6.796348] ErrLog5 : 0x889f851 [ 6.799762] Non-Modify : 0x1 [ 6.803085] AXI ID : 0x11 [ 6.806492] Master ID : CCPLEX [ 6.809905] Security Group(GRPSEC): 0x7e [ 6.813866] Cache : 0x1 -- Bufferable [ 6.817873] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.824698] FALCONSEC : 0x0 [ 6.827848] Virtual Queuing Channel(VQC): 0x0 [ 6.832504] ************************************** [ 6.837789] ------------[ cut here ]------------ [ 6.842024] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.848846] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.853837] Modules linked in: [ 6.856816] CPU: 0 PID: 101 Comm: kworker/u12:2 Not tainted 5.10.104-tegra #1 [ 6.864243] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.876250] Workqueue: events_unbound async_run_entry_fn [ 6.882008] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.887791] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 6.892770] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 6.897234] sp : ffff800010003b30 [ 6.900559] x29: ffff800010003b30 x28: 0000000000000001 [ 6.906242] x27: 0000000000000005 x26: ffffbb3d6ffe3f58 [ 6.911667] x25: ffffbb3d7093ce10 x24: 0000000000000001 [ 6.917006] x23: ffffbb3d702d7000 x22: ffffbb3d7075ea00 [ 6.922517] x21: 000000000000000f x20: ffff43fbc0ea4280 [ 6.927942] x19: ffffbb3d7075ea00 x18: 0000000000000010 [ 6.933279] x17: 0000000000006270 x16: 0000000000000068 [ 6.938794] x15: ffff43fbc0274df0 x14: 0720072007200720 [ 6.944304] x13: 0720072007200720 x12: 0720072007200720 [ 6.949642] x11: 0720072007200720 x10: 0720072007200720 [ 6.954898] x9 : 0720072007200720 x8 : 07200720072a072a [ 6.960410] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 6.966180] x5 : 0000000000057fa8 x4 : ffffbb3d705e7968 [ 6.971604] x3 : 00000000ffffffff x2 : ffffbb3d6ea7e090 [ 6.976684] x1 : ffff43fbc0274880 x0 : 0000000100010100 [ 6.982280] Call trace: [ 6.984747] tegra194_cbb_err_isr+0x190/0x1b0 [ 6.989022] __handle_irq_event_percpu+0x68/0x2a0 [ 6.993488] handle_irq_event_percpu+0x40/0xa0 [ 6.997776] handle_irq_event+0x50/0xf0 [ 7.001796] handle_fasteoi_irq+0xc0/0x170 [ 7.005838] generic_handle_irq+0x40/0x60 [ 7.009845] __handle_domain_irq+0x70/0xd0 [ 7.014045] efi_header_end+0xb0/0xf0 [ 7.017301] el1_irq+0xd0/0x180 [ 7.020269] __do_softirq+0xb4/0x3e8 [ 7.023938] irq_exit+0xc0/0xe0 [ 7.027186] __handle_domain_irq+0x74/0xd0 [ 7.030936] efi_header_end+0xb0/0xf0 [ 7.034869] el1_irq+0xd0/0x180 [ 7.037606] tegra_hda_get_dev_id+0x6c/0x2b0 [ 7.041876] tegra_hda_init+0x234/0x440 [ 7.045814] tegra_dc_hdmi_init+0x820/0xb50 [ 7.049936] tegra_dc_set_out+0x2cc/0x480 [ 7.053775] tegra_dc_probe+0xa90/0x1570 [ 7.057713] platform_drv_probe+0x5c/0xb0 [ 7.062187] really_probe+0xf8/0x3d0 [ 7.065587] driver_probe_device+0x60/0xc0 [ 7.069700] __device_attach_driver+0x8c/0xd0 [ 7.074347] bus_for_each_drv+0x8c/0xe0 [ 7.077841] __device_attach_async_helper+0xc4/0xf0 [ 7.082751] async_run_entry_fn+0x4c/0x150 [ 7.087196] process_one_work+0x1c4/0x4a0 [ 7.091049] worker_thread+0x54/0x430 [ 7.094739] kthread+0x148/0x170 [ 7.098307] ret_from_fork+0x10/0x24 [ 7.101990] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.108114] ---[ end trace 37bb91a007cfd934 ]--- [ 7.112485] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.120181] SMP: stopping secondary CPUs [ 7.124144] Kernel Offset: 0x3b3d5e8c0000 from 0xffff800010000000 [ 7.130243] PHYS_OFFSET: 0xffffbc0540000000 [ 7.134098] CPU features: 0x8240002,03802a30 [ 7.138728] Memory Limit: none [ 7.141800] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.305] I> sdmmc DDR50 mode [0001.323] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.340] W> Cannot find any partition table for 00000003 [0001.341] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.358] I> Active Boot chain : 0 [0002.029] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.482] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> hdmi cable connected [0003.599] W> set volts not configured for 'vdd-1v0' [0003.603] W> set volts not configured for 'vdd-1v8-hs' [0003.603] I> retrieved tmds range from prod_list_hdmi_soc [0003.608] E> invalid display type [0003.609] E> cannot find any other nvdisp nodes [0003.626] I> edid read success [0003.638] I> edid read success [0003.639] I> width = 640, height = 480, frequency = 25174825 [0003.639] I> width = 1920, height = 1080, frequency = 148500000 [0003.639] I> width = 1280, height = 768, frequency = 79500000 [0003.640] I> width = 1360, height = 768, frequency = 85500000 [0003.640] I> width = 720, height = 480, frequency = 26973026 [0003.644] I> width = 720, height = 576, frequency = 26973026 [0003.650] I> width = 1280, height = 720, frequency = 74175824 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1920, height = 1080, frequency = 148351648 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 720, height = 480, frequency = 26973026 [0003.678] I> width = 720, height = 576, frequency = 26973026 [0003.683] I> width = 3840, height = 2160, frequency = 296703296 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 4096, height = 2160, frequency = 296703296 [0003.712] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.724] I> hdmi_enable, starting HDMI initialisation [0003.728] I> hdmi_enable, HDMI initialisation complete [0003.738] initializing target [0003.738] calling apps_init() [0003.739] starting app kernel_boot_app [0003.740] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000669] Console: colour dummy device 80x25 [ 0.002201] printk: console [tty0] enabled [ 0.002283] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002337] pid_max: default: 32768 minimum: 301 [ 0.002570] LSM: Security Framework initializing [ 0.002643] Yama: becoming mindful. [ 0.002727] SELinux: Initializing. [ 0.002886] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002928] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005886] rcu: Hierarchical SRCU implementation. [ 0.006148] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006844] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006910] DTB Build time: Aug 10 2022 20:31:49 [ 0.009643] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009879] Remapping and enabling EFI services. [ 0.012348] smp: Bringing up secondary CPUs ... [ 0.047497] Detected PIPT I-cache on CPU1 [ 0.047594] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.080167] Detected PIPT I-cache on CPU2 [ 0.080321] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.109942] Detected PIPT I-cache on CPU3 [ 0.110084] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.139854] Detected PIPT I-cache on CPU4 [ 0.140011] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.169879] Detected PIPT I-cache on CPU5 [ 0.169972] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.170382] smp: Brought up 1 node, 6 CPUs [ 0.170584] SMP: Total of 6 processors activated. [ 0.170599] CPU features: detected: Privileged Access Never [ 0.170611] CPU features: detected: LSE atomic instructions [ 0.170624] CPU features: detected: User Access Override [ 0.170652] CPU features: detected: 32-bit EL0 Support [ 0.170666] CPU features: detected: RAS Extension Support [ 0.170679] CPU features: detected: CRC32 instructions [ 0.170692] CPU features: detected: 32-bit EL1 Support [ 0.238178] CPU: All CPU(s) started at EL2 [ 0.243609] devtmpfs: initialized [ 0.291400] Registered cp15_barrier emulation handler [ 0.291502] Registered setend emulation handler [ 0.291524] KASLR enabled [ 0.291743] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291769] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293196] pinctrl core: initialized pinctrl subsystem [ 0.294070] SMBIOS 3.0.0 present. [ 0.294109] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294760] NET: Registered protocol family 16 [ 0.296726] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.297259] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297971] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.298062] audit: initializing netlink subsys (disabled) [ 0.298387] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.298737] thermal_sys: Registered thermal governor 'step_wise' [ 0.298743] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298777] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.301699] cpuidle: using governor menu [ 0.302010] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.302472] ASID allocator initialised with 32768 entries [ 0.302696] Serial: AMBA PL011 UART driver [ 0.306104] Tegra reboot handler registered. [ 0.376006] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.376155] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.376362] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376405] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376536] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376576] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376699] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.376763] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376932] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376973] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379471] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379510] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.379541] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379571] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379600] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379627] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379664] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379698] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379740] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379764] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379804] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379831] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379854] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379895] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379919] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379942] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379965] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.380055] mc-err: mcerr ops are set to t19x [ 0.391600] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391623] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.391635] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391647] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399205] ACPI: Interpreter disabled. [ 0.400357] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.401856] iommu: Default domain type: Translated [ 0.401921] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.402273] SCSI subsystem initialized [ 0.402416] usbcore: registered new interface driver usbfs [ 0.402456] usbcore: registered new interface driver hub [ 0.402488] usbcore: registered new device driver usb [ 0.402924] mc: Linux media interface: v0.10 [ 0.402952] videodev: Linux video capture interface: v2.00 [ 0.403285] pps_core: LinuxPPS API ver. 1 registered [ 0.403296] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403315] PTP clock support registered [ 0.403527] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.403812] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.403893] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.404579] Registered efivars operations [ 0.409792] FPGA manager framework [ 0.409919] Advanced Linux Sound Architecture Driver Initialized. [ 0.410538] Bluetooth: Core ver 2.22 [ 0.410603] NET: Registered protocol family 31 [ 0.410615] Bluetooth: HCI device and connection manager initialized [ 0.410631] Bluetooth: HCI socket layer initialized [ 0.410648] Bluetooth: L2CAP socket layer initialized [ 0.410670] Bluetooth: SCO socket layer initialized [ 0.412274] camchar: rtcpu character device driver loaded [ 0.413045] clocksource: Switched to clocksource arch_sys_counter [ 0.702000] VFS: Disk quotas dquot_6.6.0 [ 0.702096] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.702471] pnp: PnP ACPI: disabled [ 0.713990] la/ptsa driver initialized. [ 0.714119] NET: Registered protocol family 2 [ 0.714314] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.719534] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.719607] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.719902] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.720334] TCP: Hash tables configured (established 65536 bind 65536) [ 0.720472] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.720561] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.720790] NET: Registered protocol family 1 [ 0.721496] RPC: Registered named UNIX socket transport module. [ 0.721512] RPC: Registered udp transport module. [ 0.721522] RPC: Registered tcp transport module. [ 0.721533] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.721550] PCI: CLS 0 bytes, default 64 [ 0.721746] Trying to unpack rootfs image as initramfs... [ 0.902687] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.904773] Freeing initrd memory: 8196K [ 0.908313] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.908343] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.908377] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.908618] kvm [1]: IPA Size Limit: 40 bits [ 0.909040] kvm [1]: vgic interrupt IRQ9 [ 0.909496] kvm [1]: VHE mode initialized successfully [ 0.910574] Initialise system trusted keyrings [ 0.910883] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.915254] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.915924] NFS: Registering the id_resolver key type [ 0.915949] Key type id_resolver registered [ 0.915960] Key type id_legacy registered [ 0.916048] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.916066] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.916111] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.923557] NET: Registered protocol family 38 [ 0.923577] Key type asymmetric registered [ 0.923587] Asymmetric key parser 'x509' registered [ 0.923626] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.923797] io scheduler mq-deadline registered [ 0.923810] io scheduler kyber registered [ 0.927845] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.929833] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.929894] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.929950] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.930006] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.930057] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.933735] scrncapt: init (heads:4 wins:6 planes:4) [ 0.934221] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.934845] EINJ: ACPI disabled. [ 0.937061] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.937080] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 0.937091] tegra-pmc: ### PMC reset level: L1 [ 0.937100] tegra-pmc: ### PMC reset status reg: 0x9 [ 0.937141] tegra-pmc: PMC Prod config success [ 0.941761] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.425000] random: fast init done [ 2.492245] printk: console [ttyTCU0] enabled [ 2.497455] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.502866] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.507412] arm-smmu 10000000.iommu: stage 1 translation [ 2.512675] arm-smmu 10000000.iommu: stage 2 translation [ 2.518461] arm-smmu 10000000.iommu: nested translation [ 2.523797] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.530953] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.540048] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.544355] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.550643] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.558138] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.563942] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.568663] arm-smmu 12000000.iommu: stage 1 translation [ 2.574173] arm-smmu 12000000.iommu: stage 2 translation [ 2.579368] arm-smmu 12000000.iommu: nested translation [ 2.585043] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.591945] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.601161] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.605340] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.611887] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.618868] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.628878] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.632286] tegra_profiler: auth: init [ 2.636437] THERMAL EST: found 3 subdevs [ 2.639992] THERMAL EST num_resources: 0 [ 2.643825] [THERMAL EST subdev 0] [ 2.646893] [THERMAL EST subdev 1] [ 2.650562] [THERMAL EST subdev 2] [ 2.653828] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.660228] THERMAL EST: thz register success. [ 2.664244] THERMAL EST: end of probe, return err: 0 [ 2.669444] nvsciipc: loaded module [ 2.675833] tun: Universal TUN/TAP device driver, 1.6 [ 2.679210] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.685582] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.690872] e1000e: Intel(R) PRO/1000 Network Driver [ 2.696060] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.701887] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.707435] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.713524] PPP generic driver version 2.4.2 [ 2.717830] PPP BSD Compression module registered [ 2.722170] PPP Deflate Compression module registered [ 2.727663] PPP MPPE Compression module registered [ 2.732700] usbcore: registered new interface driver r8152 [ 2.738207] usbcore: registered new interface driver asix [ 2.743529] usbcore: registered new interface driver ax88179_178a [ 2.749653] usbcore: registered new interface driver cdc_ether [ 2.755343] usbcore: registered new interface driver net1080 [ 2.760922] usbcore: registered new interface driver cdc_subset [ 2.767250] usbcore: registered new interface driver zaurus [ 2.772934] usbcore: registered new interface driver cdc_ncm [ 2.778353] usbcore: registered new interface driver aqc111 [ 2.783995] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.790343] ohci-pci: OHCI PCI platform driver [ 2.794379] ohci-platform: OHCI generic platform driver [ 2.800240] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.806282] usbcore: registered new interface driver uas [ 2.810921] usbcore: registered new interface driver usb-storage [ 2.817012] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.822872] mousedev: PS/2 mouse device common for all mice [ 2.827832] usbcore: registered new interface driver xpad [ 2.835823] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.838557] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.846339] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.852829] i2c /dev entries driver [ 2.856199] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.862207] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.867490] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.872905] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.878297] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.883586] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.889222] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.901340] device-mapper: uevent: version 1.0.3 [ 2.901714] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.909281] cpuidle: Initializing cpuidle driver [ 2.913324] sdhci: Secure Digital Host Controller Interface driver [ 2.918429] sdhci: Copyright(c) Pierre Ossman [ 2.922515] Synopsys Designware Multimedia Card Interface Driver [ 2.928421] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.934616] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.935168] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.947790] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.965873] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.974491] vdd-1v0: supplied by regulator-dummy [ 2.979819] vdd-1v8-hs: supplied by regulator-dummy [ 2.984418] vdd-1v8-ls: supplied by regulator-dummy [ 2.989031] vdd-1v8-ao: supplied by regulator-dummy [ 2.992808] vddio-ddr-1v1: supplied by regulator-dummy [ 2.997064] vdd-rtc: supplied by regulator-dummy [ 2.998708] spmic-ldo1: supplied by regulator-dummy [ 2.999808] vdd-ao-3v3: supplied by regulator-dummy [ 3.005798] vddio-emmc-3v3: supplied by regulator-dummy [ 3.011928] spmic-ldo4: supplied by regulator-dummy [ 3.013032] vdd-usb-3v3: supplied by regulator-dummy [ 3.019443] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.025509] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.030894] spmic-ldo8: supplied by vdd-1v8-ls [ 3.032237] gpio-510 (gpio_default): hogged as output/high [ 3.034426] gpio-511 (gpio_default): hogged as output/high [ 3.041278] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.179853] max77686-rtc max77620-rtc: registered as rtc0 [ 3.180791] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.181135] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.891971] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.892959] hid: raw HID events driver (C) Jiri Kosina [ 3.893684] usbcore: registered new interface driver usbhid [ 3.893823] usbhid: USB HID core driver [ 3.895593] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.896671] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.937616] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.012986] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.180 ms) ÿá[ 3.981812] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.982442] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.983482] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.984240] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.985921] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.986581] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.987144] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.988285] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.988648] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.990625] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.998138] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.004388] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.009841] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.016260] denver_knobs_init:MTS_VERSION:55637613 [ 4.029222] t19x_cache tegra-cache: probed [ 4.031524] optee: probing for conduit method. [ 4.032307] optee: revision 3.16 (65cc2218) [ 4.033165] optee: dynamic shared memory is enabled [ 4.036693] optee: initialized driver [ 4.043225] nvpmodel: initialized successfully [ 4.044236] tegra_hv: get_hvd: not initialized yet [ 4.049154] user_ivc_mempool: hypervisor not present [ 4.055084] usbcore: registered new interface driver snd-usb-audio [ 4.061710] u32 classifier [ 4.063020] input device check on [ 4.066730] Actions configured [ 4.070219] Initializing XFRM netlink socket [ 4.075083] NET: Registered protocol family 10 [ 4.082087] Segment Routing with IPv6 [ 4.082619] NET: Registered protocol family 17 [ 4.086716] NET: Registered protocol family 15 [ 4.091315] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.104820] Bluetooth: RFCOMM socket layer initialized [ 4.109663] Bluetooth: RFCOMM ver 1.11 [ 4.113517] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.119073] Bluetooth: HIDP socket layer initialized [ 4.125379] 9pnet: Installing 9P2000 support [ 4.128499] Key type dns_resolver registered [ 4.134459] registered taskstats version 1 [ 4.137237] Loading compiled-in X.509 certificates [ 4.149689] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.153299] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.163474] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.165155] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.173456] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.182074] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.297094] tegra194-pcie 14160000.pcie: Link up [ 4.300084] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.300331] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.300546] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.300798] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.301041] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.301452] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.301918] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.314171] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.314695] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.315159] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.316713] pci 0004:01:00.0: supports D1 D2 [ 4.316874] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.328310] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.328649] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.328897] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.329499] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.329776] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.329970] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.331743] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.339117] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.347884] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.358245] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.362481] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.368466] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.375284] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.384209] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.385844] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.394132] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.402534] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.518017] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.518550] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.518809] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.519018] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.519358] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.519580] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.520025] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.520502] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.539513] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.539781] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.541623] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.542734] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.544109] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.545950] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.547059] pci 0005:00:00.0: Removing from iommu group 7 [ 5.547646] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.584856] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.611053] host1x 13e10000.host1x: initialized [ 5.612781] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.613937] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.615280] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.616094] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.617565] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.618272] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.619475] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.620101] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.621399] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.622018] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.627953] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.635281] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.644954] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.652136] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.662028] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.668890] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.678718] falcon 15340000.vic: Adding to iommu group 17 [ 5.693978] falcon 15340000.vic: initialized [ 5.694961] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.700939] falcon 15380000.nvjpg: initialized [ 5.701721] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.711693] falcon 154c0000.nvenc: initialized [ 5.712269] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.721401] falcon 15a80000.nvenc1: initialized [ 5.722066] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.735145] nvdec 15480000.nvdec: initialized [ 5.735723] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.745609] nvdec 15140000.nvdec1: initialized [ 5.746106] tsec 15500000.tsec: Adding to iommu group 18 [ 5.751703] tsec 15500000.tsec: initialized [ 5.752171] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.759115] tsec 15100000.tsecb: initialized [ 5.763061] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.791719] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.805340] gpio-374 (wifi-enable): hogged as output/high [ 5.805651] gpio-431 (camera-control-output-low): hogged as output/low [ 5.805968] gpio-432 (camera-control-output-low): hogged as output/low [ 5.807723] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.810225] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.810809] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.812256] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.815731] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.821436] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.827163] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.835612] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.842783] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.853965] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.859376] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.865248] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.873881] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.883385] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.890290] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.898097] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.904442] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.913812] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.920030] pva 16000000.pva0: Adding to iommu group 22 [ 5.947559] pva 16000000.pva0: initialized [ 5.951673] pva 16800000.pva1: Adding to iommu group 23 [ 5.962499] pva 16800000.pva1: initialized [ 5.966209] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.980887] nvdla 15880000.nvdla0: initialized [ 5.982293] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.991425] nvdla 158c0000.nvdla1: initialized [ 5.993744] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.994054] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.994352] tegradccommon 15200000.display-hub: dma mapping done [ 5.996328] tegradc 15200000.display: Adding to iommu group 26 [ 6.004713] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.005451] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.005752] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.006542] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.007195] generic_infoframe_type: 0x87 [ 6.010715] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.014612] tegradc 15200000.display: DT parsed successfully [ 6.020045] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.020057] tegra_cec 3960000.tegra_cec: probed [ 6.021272] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.022644] tegradc 15210000.display: Adding to iommu group 26 [ 6.026164] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.034121] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.040633] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.042571] kfuse 3830000.kfuse: initialized [ 6.047670] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.047706] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.056682] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.063554] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.070842] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.071420] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.075078] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.098116] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.105751] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.111825] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.119871] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.142352] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.148971] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.156672] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.166521] tegradc 15210000.display: disp0 connected to head1->sor [ 6.171780] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.177299] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.195437] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.199253] tegradc 15210000.display: DT parsed successfully [ 6.208896] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.214677] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.220007] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.236080] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.244827] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.251366] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.258983] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.266040] usb usb1: Product: xHCI Host Controller [ 6.271321] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.277402] usb usb1: SerialNumber: 3610000.xhci [ 6.283091] hub 1-0:1.0: USB hub found [ 6.285833] hub 1-0:1.0: 4 ports detected [ 6.290706] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.295304] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.303168] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.310788] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.318480] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.325965] usb usb2: Product: xHCI Host Controller [ 6.330703] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.336928] usb usb2: SerialNumber: 3610000.xhci [ 6.342252] hub 2-0:1.0: USB hub found [ 6.345643] hub 2-0:1.0: 4 ports detected [ 6.387303] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.393191] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.394712] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.394895] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.408266] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.409347] tegra194-cpufreq ccplex: probed with BWMGR [ 6.410410] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.410991] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.411454] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.412673] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.420280] tegra194-vi5 15c10000.vi: initialized [ 6.421663] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.425891] mmc0: CQHCI version 5.10 [ 6.426783] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.429506] generic_infoframe_type: 0x87 [ 6.435929] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.439737] tegradc 15200000.display: DT parsed successfully [ 6.447808] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.453365] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.459585] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.474533] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.474544] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.480790] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.489439] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.503688] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.505050] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.510290] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.526162] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.526186] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.532998] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.539006] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.546002] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.549044] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.553331] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.577705] nvethernet 2490000.ethernet: Macsec not supported [ 6.584030] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.585001] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.590736] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.607336] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.608335] tegradc 15200000.display: probed [ 6.611861] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.623667] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.631488] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.638804] tegra-se-nvhost 15810000.se: initialized [ 6.646860] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.648046] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.654477] tegra-se-nvhost 15820000.se: initialized [ 6.661157] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.665291] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.671695] Console: switching to colour frame buffer device 240x67 [ 6.672051] tegra-se-nvhost 15830000.se: initialized [ 6.677543] tegradc 15200000.display: fb registered [ 6.683582] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.687376] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.693857] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.693894] mmc0: Command Queue Engine enabled [ 6.693899] mmc0: periodic cache flush enabled [ 6.693912] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.694470] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.694630] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.698601] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.700126] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.706075] tegra-se-nvhost 15840000.se: initialized [ 6.710039] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.715728] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.765059] tegra_actmon d230000.actmon: in actmon_register()... [ 6.769482] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.775374] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.783630] hvc_sysfs: hypervisor is not present [ 6.783970] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.794866] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.804442] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.812009] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.814605] ALSA device list: [ 6.816475] usb 1-2: Manufacturer: Generic [ 6.824197] No soundcards found. [ 6.828481] hub 1-2:1.0: USB hub found [ 6.828519] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.832537] hub 1-2:1.0: 4 ports detected [ 6.838878] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.839745] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.858400] Extcon AUX1(HDMI) enable [ 6.862176] tegradc 15210000.display: disp1 connected to head1->sor [ 6.868466] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.875613] tegradc 15210000.display: DT parsed successfully [ 6.881151] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.889040] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.894910] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.908449] tegradc 15210000.display: probed [ 6.908771] tegradc 15210000.display: fb registered [ 6.910236] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.913611] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.919866] Freeing unused kernel memory: 3968K [ 6.925091] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.937560] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.943376] tegradc 15210000.display: blank - powerdown [ 6.945243] Run /init as init process [ 6.948219] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.960441] Extcon DP: HPD disabled [ 6.963879] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.970662] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.976352] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.987852] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.991405] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.998833] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.003563] usb 2-3: Manufacturer: Generic ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.012593] tegradc 15200000.display: blank - powerdown [ 7.018683] hub 2-3:1.0: USB hub found [ 7.020498] hub 2-3:1.0: 4 ports detected [ 7.032872] Root device found: mmcblk0p1 [ 7.034910] Found dev node: /dev/mmcblk0p1 [ 7.041042] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.051083] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.051087] Extcon AUX1(HDMI) disable [ 7.074982] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.076076] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.089629] tegradc 15200000.display: unblank [ 7.090716] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.090920] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.092114] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.097052] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.097699] Rootfs mounted over mmcblk0p1 [ 7.099238] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.101054] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.103227] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.103231] Extcon AUX1(HDMI) enable [ 7.105575] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.105579] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.116026] tegradc 15200000.display: sync windows ret = 247 [ 7.136090] Switching from initrd to actual rootfs [ 7.164069] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.171348] Extcon HDMI: HPD enabled [ 7.174749] tegradc 15200000.display: hdmi: plugged [ 7.250253] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.251614] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.252938] usb 1-3: Product: Bluetooth Radio [ 7.254218] usb 1-3: Manufacturer: Realtek [ 7.255458] usb 1-3: SerialNumber: 00e04c000001 [ 7.317253] systemd[1]: System time before build time, advancing clock. [ 7.392387] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.397332] systemd[1]: Detected architecture arm64. [ 7.461836] systemd[1]: Set hostname to . [ 7.627666] systemd-sysv-generator[260]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.982047] random: systemd: uninitialized urandom read (16 bytes read) [ 7.983757] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.985368] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.991072] systemd[1]: Created slice system-modprobe.slice. [ 7.994448] random: systemd: uninitialized urandom read (16 bytes read) [ 7.997122] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.000185] random: systemd: uninitialized urandom read (16 bytes read) [ 8.002799] systemd[1]: Created slice User and Session Slice. [ 8.006220] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.010418] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.013682] systemd[1]: Reached target User and Group Name Lookups. [ 8.016733] systemd[1]: Reached target Slices. [ 8.019780] systemd[1]: Reached target Swap. [ 8.023777] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.027372] systemd[1]: Listening on Syslog Socket. [ 8.030943] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.034329] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.038479] systemd[1]: Listening on Journal Audit Socket. [ 8.042027] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.045798] systemd[1]: Listening on Journal Socket. [ 8.049556] systemd[1]: Listening on udev Control Socket. [ 8.053058] systemd[1]: Listening on udev Kernel Socket. [ 8.061767] systemd[1]: Mounting Huge Pages File System... [ 8.070434] systemd[1]: Mounting POSIX Message Queue File System... [ 8.080304] systemd[1]: Mounting RPC Pipe File System... [ 8.089448] systemd[1]: Mounting Kernel Debug File System... [ 8.098175] systemd[1]: Mounting Kernel Trace File System... [ 8.108324] systemd[1]: Starting Journal Service... [ 8.117620] systemd[1]: Starting Set the console keyboard layout... [ 8.126125] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.129663] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.136445] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.144600] systemd[1]: Started Nameserver information manager. [ 8.149719] systemd[1]: Reached target Network (Pre). [ 8.156469] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.158426] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.166941] systemd[1]: Starting Load Kernel Modules... [ 8.175250] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.184429] systemd[1]: Starting udev Coldplug all Devices... [ 8.194719] systemd[1]: Mounted Huge Pages File System. [ 8.198451] systemd[1]: Mounted POSIX Message Queue File System. [ 8.202166] systemd[1]: Mounted RPC Pipe File System. [ 8.205876] systemd[1]: Mounted Kernel Debug File System. [ 8.206181] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.213107] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.214372] systemd[1]: Mounted Kernel Trace File System. [ 8.214985] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.217497] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.217511] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.217515] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.218257] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.219122] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.233258] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.234184] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.236885] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.256099] systemd[1]: nvfb-udev.service: Succeeded. [ 8.260589] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.274738] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.279728] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.281704] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.294430] systemd[1]: Starting Load/Save Random Seed... [ 8.302474] systemd[1]: Starting Create System Users... [ 8.352952] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.352952] [ 8.374084] systemd[1]: Finished Create System Users. [ 8.382918] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.390665] systemd[1]: Finished Set the console keyboard layout. [ 8.397195] systemd[1]: Finished Load Kernel Modules. [ 8.401792] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.408363] systemd[1]: Mounting Kernel Configuration File System... [ 8.416338] systemd[1]: Started OP-TEE Client Supplicant. [ 8.425522] systemd[1]: Starting Apply Kernel Variables... [ 8.436657] systemd[1]: Mounted Kernel Configuration File System. [ 8.448470] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.452414] systemd[1]: Reached target Local File Systems (Pre). [ 8.455566] systemd[1]: Reached target Local File Systems. [ 9.601610] random: crng init done [ 9.602890] random: 7 urandom warning(s) missed due to ratelimiting [ 9.727330] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.735216] imx219 9-0010: board setup failed [ 9.736628] imx219: probe of 9-0010 failed with error -121 [ 9.763999] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.770642] imx219 10-0010: board setup failed [ 9.771803] hot-surface-alert cooling state: 0 -> 1 [ 9.771995] imx219: probe of 10-0010 failed with error -121 [ 10.972324] using random self ethernet address [ 10.972331] using random host ethernet address [ 11.276219] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.276225] Creating 1 MTD partitions on "spi6.0": [ 11.276232] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.145470] using random self ethernet address [ 12.148529] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.837904] nvidia: loading out-of-tree module taints kernel. [ 59.387067] watchdog: watchdog0: watchdog did not stop! [ 59.891073] Trying to unregister non-registered hwtime source [ 62.949251] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.951350] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr buóÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23:ÿâdmce initialized cvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> hdmi cable connected [0003.610] W> set volts not configured for 'vdd-1v0' [0003.615] W> set volts not configured for 'vdd-1v8-hs' [0003.616] I> retrieved tmds range from prod_list_hdmi_soc [0003.621] E> invalid display type [0003.623] E> cannot find any other nvdisp nodes [0003.639] I> edid read success [0003.652] I> edid read success [0003.652] I> width = 640, height = 480, frequency = 25174825 [0003.653] I> width = 1920, height = 1080, frequency = 148500000 [0003.653] I> width = 1280, height = 768, frequency = 79500000 [0003.653] I> width = 1360, height = 768, frequency = 85500000 [0003.654] I> width = 720, height = 480, frequency = 26973026 [0003.658] I> width = 720, height = 576, frequency = 26973026 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.686] I> width = 720, height = 480, frequency = 26973026 [0003.692] I> width = 720, height = 576, frequency = 26973026 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 4096, height = 2160, frequency = 296703296 [0003.726] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.737] I> hdmi_enable, starting HDMI initialisation [0003.742] I> hdmi_enable, HDMI initialisation complete [0003.751] initializing target [0003.752] calling apps_init() [0003.753] starting app kernel_boot_app [0003.754] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000800] Console: colour dummy device 80x25 [ 0.002107] printk: console [tty0] enabled [ 0.002189] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002225] pid_max: default: 32768 minimum: 301 [ 0.002415] LSM: Security Framework initializing [ 0.002476] Yama: becoming mindful. [ 0.002519] SELinux: Initializing. [ 0.002679] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002716] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005719] rcu: Hierarchical SRCU implementation. [ 0.005988] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007236] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007286] DTB Build time: Aug 10 2022 20:31:49 [ 0.012149] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.012436] Remapping and enabling EFI services. [ 0.014504] smp: Bringing up secondary CPUs ... [ 0.043654] Detected PIPT I-cache on CPU1 [ 0.043757] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073314] Detected PIPT I-cache on CPU2 [ 0.073464] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103008] Detected PIPT I-cache on CPU3 [ 0.103093] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132852] Detected PIPT I-cache on CPU4 [ 0.132932] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162590] Detected PIPT I-cache on CPU5 [ 0.162808] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163102] smp: Brought up 1 node, 6 CPUs [ 0.163343] SMP: Total of 6 processors activated. [ 0.163408] CPU features: detected: Privileged Access Never [ 0.163437] CPU features: detected: LSE atomic instructions [ 0.163457] CPU features: detected: User Access Override [ 0.163490] CPU features: detected: 32-bit EL0 Support [ 0.163508] CPU features: detected: RAS Extension Support [ 0.163542] CPU features: detected: CRC32 instructions [ 0.163574] CPU features: detected: 32-bit EL1 Support [ 0.233402] CPU: All CPU(s) started at EL2 [ 0.238802] devtmpfs: initialized [ 0.289662] Registered cp15_barrier emulation handler [ 0.289766] Registered setend emulation handler [ 0.289787] KASLR enabled [ 0.290075] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.290098] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291436] pinctrl core: initialized pinctrl subsystem [ 0.292659] SMBIOS 3.0.0 present. [ 0.292694] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.293298] NET: Registered protocol family 16 [ 0.295295] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295829] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296545] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296606] audit: initializing netlink subsys (disabled) [ 0.296885] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.297355] thermal_sys: Registered thermal governor 'step_wise' [ 0.297362] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297378] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299478] cpuidle: using governor menu [ 0.299782] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300206] ASID allocator initialised with 32768 entries [ 0.300417] Serial: AMBA PL011 UART driver [ 0.303904] Tegra reboot handler registered. [ 0.371240] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.371396] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.371572] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.371613] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.371729] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.371765] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.371872] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.371925] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372071] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372107] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.374386] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.374420] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.374448] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.374476] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.374505] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.374531] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.374568] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.374623] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.374648] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.374689] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.374713] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.374752] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.374775] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.374798] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.374821] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.374844] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.374867] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.374952] mc-err: mcerr ops are set to t19x [ 0.387049] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.387073] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.387085] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.387097] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.393723] ACPI: Interpreter disabled. [ 0.394823] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.396095] iommu: Default domain type: Translated [ 0.396163] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.396591] SCSI subsystem initialized [ 0.396749] usbcore: registered new interface driver usbfs [ 0.396791] usbcore: registered new interface driver hub [ 0.396834] usbcore: registered new device driver usb [ 0.397183] mc: Linux media interface: v0.10 [ 0.397210] videodev: Linux video capture interface: v2.00 [ 0.397485] pps_core: LinuxPPS API ver. 1 registered [ 0.397497] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.397520] PTP clock support registered [ 0.397730] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.398051] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.398130] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.398642] Registered efivars operations [ 0.403614] FPGA manager framework [ 0.403766] Advanced Linux Sound Architecture Driver Initialized. [ 0.404359] Bluetooth: Core ver 2.22 [ 0.404394] NET: Registered protocol family 31 [ 0.404410] Bluetooth: HCI device and connection manager initialized [ 0.404425] Bluetooth: HCI socket layer initialized [ 0.404441] Bluetooth: L2CAP socket layer initialized [ 0.404462] Bluetooth: SCO socket layer initialized [ 0.406645] camchar: rtcpu character device driver loaded [ 0.407624] clocksource: Switched to clocksource arch_sys_counter [ 0.852769] VFS: Disk quotas dquot_6.6.0 [ 0.852865] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.853236] pnp: PnP ACPI: disabled [ 0.866746] la/ptsa driver initialized. [ 0.866902] NET: Registered protocol family 2 [ 0.867139] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.874729] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.874918] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.875290] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.875960] TCP: Hash tables configured (established 65536 bind 65536) [ 0.876117] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.876244] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.876572] NET: Registered protocol family 1 [ 0.877591] RPC: Registered named UNIX socket transport module. [ 0.877620] RPC: Registered udp transport module. [ 0.877633] RPC: Registered tcp transport module. [ 0.877647] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.877669] PCI: CLS 0 bytes, default 64 [ 0.877930] Trying to unpack rootfs image as initramfs... [ 1.144129] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.147127] Freeing initrd memory: 8196K [ 1.151112] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.151147] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.151195] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.151504] kvm [1]: IPA Size Limit: 40 bits [ 1.151965] kvm [1]: vgic interrupt IRQ9 [ 1.152469] kvm [1]: VHE mode initialized successfully [ 1.153854] Initialise system trusted keyrings [ 1.154136] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.161156] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.161995] NFS: Registering the id_resolver key type [ 1.162056] Key type id_resolver registered [ 1.162071] Key type id_legacy registered [ 1.162185] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.162209] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.162253] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.172186] NET: Registered protocol family 38 [ 1.172209] Key type asymmetric registered [ 1.172224] Asymmetric key parser 'x509' registered [ 1.172272] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.172542] io scheduler mq-deadline registered [ 1.172559] io scheduler kyber registered [ 1.177939] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.180855] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.180934] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.181004] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.181075] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.181149] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.186787] scrncapt: init (heads:4 wins:6 planes:4) [ 1.187015] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.188067] EINJ: ACPI disabled. [ 1.191775] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.191801] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.191816] tegra-pmc: ### PMC reset level: L1 [ 1.191830] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.191886] tegra-pmc: PMC Prod config success [ 1.196988] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.202546] random: fast init done [ 1.203137] printk: console [ttyTCU0] enabled [ 2.754909] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.759118] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.763777] arm-smmu 10000000.iommu: stage 1 translation [ 2.769129] arm-smmu 10000000.iommu: stage 2 translation [ 2.774957] arm-smmu 10000000.iommu: nested translation [ 2.780245] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.787434] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.797809] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.800274] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.807091] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.815258] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.819896] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.824599] arm-smmu 12000000.iommu: stage 1 translation [ 2.830131] arm-smmu 12000000.iommu: stage 2 translation [ 2.835790] arm-smmu 12000000.iommu: nested translation [ 2.840960] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.848167] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.858257] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.861552] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.867817] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.875631] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.885303] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.888223] tegra_profiler: auth: init [ 2.892737] THERMAL EST: found 3 subdevs [ 2.895914] THERMAL EST num_resources: 0 [ 2.900046] [THERMAL EST subdev 0] [ 2.903060] [THERMAL EST subdev 1] [ 2.906751] [THERMAL EST subdev 2] [ 2.909737] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.916219] THERMAL EST: thz register success. [ 2.920436] THERMAL EST: end of probe, return err: 0 [ 2.926022] nvsciipc: loaded module [ 2.933476] tun: Universal TUN/TAP device driver, 1.6 [ 2.935491] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.941762] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.947078] e1000e: Intel(R) PRO/1000 Network Driver [ 2.952249] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.958074] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.963635] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.969589] PPP generic driver version 2.4.2 [ 2.973815] PPP BSD Compression module registered [ 2.978609] PPP Deflate Compression module registered [ 2.983883] PPP MPPE Compression module registered [ 2.988633] usbcore: registered new interface driver r8152 [ 2.994399] usbcore: registered new interface driver asix [ 2.999472] usbcore: registered new interface driver ax88179_178a [ 3.005573] usbcore: registered new interface driver cdc_ether [ 3.011521] usbcore: registered new interface driver net1080 [ 3.017120] usbcore: registered new interface driver cdc_subset [ 3.023423] usbcore: registered new interface driver zaurus [ 3.029120] usbcore: registered new interface driver cdc_ncm [ 3.034790] usbcore: registered new interface driver aqc111 [ 3.040188] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.046510] ohci-pci: OHCI PCI platform driver [ 3.050553] ohci-platform: OHCI generic platform driver [ 3.056513] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.063003] usbcore: registered new interface driver uas [ 3.067114] usbcore: registered new interface driver usb-storage [ 3.073067] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.079275] mousedev: PS/2 mouse device common for all mice [ 3.084002] usbcore: registered new interface driver xpad [ 3.092058] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.094739] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.102534] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.109153] i2c /dev entries driver [ 3.112475] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.118239] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.123780] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.128929] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.134292] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.139830] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.145186] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.159083] device-mapper: uevent: version 1.0.3 [ 3.159583] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.165973] cpuidle: Initializing cpuidle driver [ 3.169626] sdhci: Secure Digital Host Controller Interface driver [ 3.174598] sdhci: Copyright(c) Pierre Ossman [ 3.178446] Synopsys Designware Multimedia Card Interface Driver [ 3.184910] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.190826] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.191767] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.203856] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.225238] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.235022] vdd-1v0: supplied by regulator-dummy [ 3.240582] vdd-1v8-hs: supplied by regulator-dummy [ 3.245543] vdd-1v8-ls: supplied by regulator-dummy [ 3.250490] vdd-1v8-ao: supplied by regulator-dummy [ 3.254435] vddio-ddr-1v1: supplied by regulator-dummy [ 3.258965] vdd-rtc: supplied by regulator-dummy [ 3.260759] spmic-ldo1: supplied by regulator-dummy [ 3.262045] vdd-ao-3v3: supplied by regulator-dummy [ 3.268373] vddio-emmc-3v3: supplied by regulator-dummy [ 3.274651] spmic-ldo4: supplied by regulator-dummy [ 3.275986] vdd-usb-3v3: supplied by regulator-dummy [ 3.282222] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.288451] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.294102] spmic-ldo8: supplied by vdd-1v8-ls [ 3.295644] gpio-510 (gpio_default): hogged as output/high [ 3.297014] gpio-511 (gpio_default): hogged as output/high [ 3.299953] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.436803] max77686-rtc max77620-rtc: registered as rtc0 [ 3.438166] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.438535] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.268395] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.269462] hid: raw HID events driver (C) Jiri Kosina [ 4.270133] usbcore: registered new interface driver usbhid [ 4.270278] usbhid: USB HID core driver [ 4.271979] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.272989] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.373187] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.448876] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 76.498 ms) ÿá[ 4.358264] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.358928] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.360056] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.360643] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.362352] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.363143] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.363920] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.365202] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.365557] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.367529] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.374941] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.381173] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.386066] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.392785] denver_knobs_init:MTS_VERSION:55637613 [ 4.405238] t19x_cache tegra-cache: probed [ 4.407796] optee: probing for conduit method. [ 4.408632] optee: revision 3.16 (65cc2218) [ 4.409611] optee: dynamic shared memory is enabled [ 4.413149] optee: initialized driver [ 4.419979] nvpmodel: initialized successfully [ 4.421253] tegra_hv: get_hvd: not initialized yet [ 4.425583] user_ivc_mempool: hypervisor not present [ 4.432483] usbcore: registered new interface driver snd-usb-audio [ 4.438411] u32 classifier [ 4.439227] input device check on [ 4.443034] Actions configured [ 4.446545] Initializing XFRM netlink socket [ 4.451797] NET: Registered protocol family 10 [ 4.458367] Segment Routing with IPv6 [ 4.459075] NET: Registered protocol family 17 [ 4.463189] NET: Registered protocol family 15 [ 4.467771] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.481138] Bluetooth: RFCOMM socket layer initialized [ 4.485781] Bluetooth: RFCOMM ver 1.11 [ 4.489911] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.495517] Bluetooth: HIDP socket layer initialized [ 4.501612] 9pnet: Installing 9P2000 support [ 4.505232] Key type dns_resolver registered [ 4.510427] registered taskstats version 1 [ 4.513649] Loading compiled-in X.509 certificates [ 4.525617] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.529550] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.539082] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.541357] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.550198] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.558266] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.675743] tegra194-pcie 14160000.pcie: Link up [ 4.679058] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.679265] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.679492] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.679770] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.679964] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.680378] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.680881] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.694700] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.695217] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.695829] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.697300] pci 0004:01:00.0: supports D1 D2 [ 4.697449] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.710250] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.710586] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.710822] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.711351] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.711757] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.711979] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.712311] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.717720] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.726508] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.736804] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.741362] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.746771] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.754105] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.762701] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.764477] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.772592] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.781425] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.887733] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.888345] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.888552] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.888758] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.888994] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.889220] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.889569] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.890006] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.905351] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.905692] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.907910] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.909313] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.910467] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.912089] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.912998] pci 0005:00:00.0: Removing from iommu group 7 [ 5.913262] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.943306] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.965694] host1x 13e10000.host1x: initialized [ 5.967124] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.968092] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.969154] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.969817] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.970778] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.971452] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.972559] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.973161] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.980845] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.987875] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.997689] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.004914] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.014783] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.021586] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.031403] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.038777] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.048385] falcon 15340000.vic: Adding to iommu group 17 [ 6.063447] falcon 15340000.vic: initialized [ 6.064479] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.069555] falcon 15380000.nvjpg: initialized [ 6.070121] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.081264] falcon 154c0000.nvenc: initialized [ 6.081912] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.091485] falcon 15a80000.nvenc1: initialized [ 6.092167] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.103989] nvdec 15480000.nvdec: initialized [ 6.104521] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.112661] nvdec 15140000.nvdec1: initialized [ 6.113251] tsec 15500000.tsec: Adding to iommu group 18 [ 6.119529] tsec 15500000.tsec: initialized [ 6.120116] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.128528] tsec 15100000.tsecb: initialized [ 6.132089] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.157670] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.169453] gpio-374 (wifi-enable): hogged as output/high [ 6.169813] gpio-431 (camera-control-output-low): hogged as output/low [ 6.170169] gpio-432 (camera-control-output-low): hogged as output/low [ 6.171954] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.173910] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.174589] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.180374] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.185240] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.191184] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.196596] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.205711] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.212350] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.223690] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.229112] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.234981] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.243913] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.253256] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.260471] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.268041] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.273895] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.283845] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.290078] pva 16000000.pva0: Adding to iommu group 22 [ 6.315746] pva 16000000.pva0: initialized [ 6.320921] pva 16800000.pva1: Adding to iommu group 23 [ 6.331037] pva 16800000.pva1: initialized [ 6.335430] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.348515] nvdla 15880000.nvdla0: initialized [ 6.349640] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.358235] nvdla 158c0000.nvdla1: initialized [ 6.361791] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.361932] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.362074] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.362365] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.362500] tegradccommon 15200000.display-hub: dma mapping done [ 6.362520] tegradc 15200000.display: Adding to iommu group 26 [ 6.363222] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.371353] tegradc 15210000.display: Adding to iommu group 26 [ 6.371363] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.371498] generic_infoframe_type: 0x87 [ 6.371590] tegradc 15200000.display: DT parsed successfully [ 6.372070] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.374271] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.403685] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.409860] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.417877] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.417887] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.432088] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.440045] tegra_cec 3960000.tegra_cec: probed [ 6.445539] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.457079] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.457822] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.475584] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.476446] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.487337] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.487685] kfuse 3830000.kfuse: initialized [ 6.495589] tegradc 15210000.display: disp0 connected to head1->sor [ 6.499184] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.505005] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.510909] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.511660] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.518290] tegradc 15210000.display: DT parsed successfully [ 6.525423] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.530766] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.554770] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.559786] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.568823] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.574626] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.594423] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.594798] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.597831] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.606196] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.614670] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.621308] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.628680] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.635848] usb usb1: Product: xHCI Host Controller [ 6.641030] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.647039] usb usb1: SerialNumber: 3610000.xhci [ 6.653115] hub 1-0:1.0: USB hub found [ 6.655953] hub 1-0:1.0: 4 ports detected [ 6.660337] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.665013] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.672867] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.680537] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.688472] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.695726] usb usb2: Product: xHCI Host Controller [ 6.700412] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.706656] usb usb2: SerialNumber: 3610000.xhci [ 6.712346] hub 2-0:1.0: USB hub found [ 6.715327] hub 2-0:1.0: 4 ports detected [ 6.757828] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.763116] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.764532] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.764747] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.777290] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.778366] tegra194-cpufreq ccplex: probed with BWMGR [ 6.779721] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.780440] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.780980] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.782291] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.790983] mmc0: CQHCI version 5.10 [ 6.792245] tegra194-vi5 15c10000.vi: initialized [ 6.794399] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.795816] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.799369] generic_infoframe_type: 0x87 [ 6.805717] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.809420] tegradc 15200000.display: DT parsed successfully [ 6.817496] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.817505] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.817513] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.822810] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.829341] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.837489] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.847690] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.850800] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.856958] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.856964] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.877778] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.880285] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.881254] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.881301] nvethernet 2490000.ethernet: Macsec not supported [ 6.882609] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.883808] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.883948] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.884115] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.885244] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.886906] tegra-se-nvhost 15810000.se: initialized [ 6.894326] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.906637] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.909607] tegradc 15200000.display: vpulse3 syncpt # 13 for dc 0 [ 6.909816] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.917283] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.923941] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.931573] tegra-se-nvhost 15820000.se: initialized [ 6.936488] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.936516] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.938644] tegradc 15200000.display: probed [ 6.946040] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.971631] mmc0: Command Queue Engine enabled [ 6.974447] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.980392] mmc0: periodic cache flush enabled [ 6.980410] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.980905] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.991911] tegra-se-nvhost 15830000.se: initialized [ 6.997530] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.006252] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.021346] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.024602] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.093658] Console: switching to colour frame buffer device 240x67 [ 7.094125] tegra-se-nvhost 15840000.se: initialized [ 7.099674] tegradc 15200000.display: fb registered [ 7.099748] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.105837] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.110085] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.116771] tegra_actmon d230000.actmon: in actmon_register()... [ 7.118986] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.118993] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.118997] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.119001] usb 1-2: Manufacturer: Generic [ 7.120980] hub 1-2:1.0: USB hub found [ 7.121318] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.122222] hub 1-2:1.0: 4 ports detected [ 7.127213] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.177475] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.185626] hvc_sysfs: hypervisor is not present [ 7.188970] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.209379] random: crng init done [ 7.216897] ALSA device list: [ 7.217017] No soundcards found. [ 7.217945] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.218174] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.224404] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.230738] Extcon AUX1(HDMI) enable [ 7.234833] tegradc 15210000.display: disp1 connected to head1->sor [ 7.236630] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.240977] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.255692] tegradc 15210000.display: DT parsed successfully [ 7.261390] tegradc 15210000.display: Display dc.0000000057e536f4 registered with id=1 [ 7.269536] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.275276] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.285256] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.288886] tegradc 15210000.display: probed [ 7.290062] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.301702] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.301726] usb 2-3: Manufacturer: Generic [ 7.310620] tegradc 15210000.display: fb registered [ 7.312667] hub 2-3:1.0: USB hub found [ 7.318980] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.321139] hub 2-3:1.0: 4 ports detected [ 7.326662] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.328547] Freeing unused kernel memory: 3968K [ 7.343021] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.348772] tegradc 15210000.display: blank - powerdown [ 7.353698] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.355752] Run /init as init process [ 7.361747] Extcon DP: HPD disabled [ 7.361751] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.361764] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.368914] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.388537] tegradc 15200000.display: blank - powerdown [ 7.407641] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.422711] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.422715] Extcon AUX1(HDMI) disable [ 7.446030] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.446877] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.458269] tegradc 15200000.display: unblank [ 7.459517] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.459662] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.459667] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.459728] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.465660] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.467711] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.471715] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.471718] Extcon AUX1(HDMI) enable [ 7.484488] tegradc 15200000.display: sync windows ret = 247 [ 7.512482] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.514027] Extcon HDMI: HPD enabled [ 7.515422] tegradc 15200000.display: hdmi: plugged [ 7.560906] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.562506] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.563133] Root device found: mmcblk0p1 [ 7.564001] usb 1-3: Product: Bluetooth Radio [ 7.564017] usb 1-3: Manufacturer: Realtek [ 7.567525] Found dev node: /dev/mmcblk0p1 [ 7.568188] usb 1-3: SerialNumber: 00e04c000001 [ 7.605751] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.611463] Rootfs mounted over mmcblk0p1 [ 7.655514] Switching from initrd to actual rootfs [ 7.813092] systemd[1]: System time before build time, advancing clock. [ 7.889865] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.894831] systemd[1]: Detected architecture arm64. [ 7.936997] systemd[1]: Set hostname to . [ 8.107740] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.462224] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.464054] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.470924] systemd[1]: Created slice system-modprobe.slice. [ 8.475821] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.480200] systemd[1]: Created slice User and Session Slice. [ 8.483876] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.488308] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.491764] systemd[1]: Reached target User and Group Name Lookups. [ 8.494846] systemd[1]: Reached target Slices. [ 8.497951] systemd[1]: Reached target Swap. [ 8.501787] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.505368] systemd[1]: Listening on Syslog Socket. [ 8.508807] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.512162] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.516286] systemd[1]: Listening on Journal Audit Socket. [ 8.519761] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.524733] systemd[1]: Listening on Journal Socket. [ 8.528308] systemd[1]: Listening on udev Control Socket. [ 8.533159] systemd[1]: Listening on udev Kernel Socket. [ 8.541341] systemd[1]: Mounting Huge Pages File System... [ 8.549721] systemd[1]: Mounting POSIX Message Queue File System... [ 8.557846] systemd[1]: Mounting RPC Pipe File System... [ 8.566331] systemd[1]: Mounting Kernel Debug File System... [ 8.574914] systemd[1]: Mounting Kernel Trace File System... [ 8.584965] systemd[1]: Starting Journal Service... [ 8.593943] systemd[1]: Starting Set the console keyboard layout... [ 8.603110] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.606538] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.612917] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.621158] systemd[1]: Started Nameserver information manager. [ 8.625869] systemd[1]: Reached target Network (Pre). [ 8.633176] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.635007] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.642544] systemd[1]: Starting Load Kernel Modules... [ 8.650430] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.658672] systemd[1]: Starting udev Coldplug all Devices... [ 8.670129] systemd[1]: Mounted Huge Pages File System. [ 8.673788] systemd[1]: Mounted POSIX Message Queue File System. [ 8.677464] systemd[1]: Mounted RPC Pipe File System. [ 8.680862] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.680966] systemd[1]: Mounted Kernel Debug File System. [ 8.686526] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.688320] systemd[1]: Mounted Kernel Trace File System. [ 8.688675] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.691189] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.691201] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.691206] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.695921] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.696093] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.696104] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.697410] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.708468] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.717691] systemd[1]: nvfb-udev.service: Succeeded. [ 8.722249] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.733458] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.738678] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.740422] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.754477] systemd[1]: Starting Load/Save Random Seed... [ 8.763950] systemd[1]: Starting Create System Users... [ 8.796328] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.796328] [ 8.819944] systemd[1]: Finished Load/Save Random Seed. [ 8.826450] systemd[1]: Finished Load Kernel Modules. [ 8.834646] systemd[1]: Finished Create System Users. [ 8.839556] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.846389] systemd[1]: Mounting Kernel Configuration File System... [ 8.854520] systemd[1]: Started OP-TEE Client Supplicant. [ 8.863188] systemd[1]: Starting Apply Kernel Variables... [ 8.871978] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.881764] systemd[1]: Finished Set the console keyboard layout. [ 8.886108] systemd[1]: Mounted Kernel Configuration File System. [ 10.279187] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.284493] imx219 9-0010: board setup failed [ 10.284623] imx219: probe of 9-0010 failed with error -121 [ 10.297764] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.308742] imx219 10-0010: board setup failed [ 10.310098] imx219: probe of 10-0010 failed with error -121 [ 10.413114] hot-surface-alert cooling state: 0 -> 1 [ 11.253693] using random self ethernet address [ 11.254917] using random host ethernet address [ 11.875344] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.877232] Creating 1 MTD partitions on "spi6.0": [ 11.878991] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.481130] using random self ethernet address [ 12.482814] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.857734] nvidia: loading out-of-tree module taints kernel. [ 59.041899] watchdog: watchdog0: watchdog did not stop! [ 59.572619] Trying to unregister non-registered hwtime source [ 62.634601] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.636285] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] tiíÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.746] calling apps_init() [0003.747] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000624] Console: colour dummy device 80x25 [ 0.002117] printk: console [tty0] enabled [ 0.002179] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002213] pid_max: default: 32768 minimum: 301 [ 0.002384] LSM: Security Framework initializing [ 0.002442] Yama: becoming mindful. [ 0.002484] SELinux: Initializing. [ 0.002630] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002667] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005726] rcu: Hierarchical SRCU implementation. [ 0.005966] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006684] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006735] DTB Build time: Aug 10 2022 20:31:49 [ 0.009465] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009752] Remapping and enabling EFI services. [ 0.011782] smp: Bringing up secondary CPUs ... [ 0.041046] Detected PIPT I-cache on CPU1 [ 0.041161] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072826] Detected PIPT I-cache on CPU2 [ 0.072977] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102612] Detected PIPT I-cache on CPU3 [ 0.102752] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132495] Detected PIPT I-cache on CPU4 [ 0.132665] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162412] Detected PIPT I-cache on CPU5 [ 0.162513] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162879] smp: Brought up 1 node, 6 CPUs [ 0.163061] SMP: Total of 6 processors activated. [ 0.163144] CPU features: detected: Privileged Access Never [ 0.163168] CPU features: detected: LSE atomic instructions [ 0.163181] CPU features: detected: User Access Override [ 0.163193] CPU features: detected: 32-bit EL0 Support [ 0.163205] CPU features: detected: RAS Extension Support [ 0.163216] CPU features: detected: CRC32 instructions [ 0.163228] CPU features: detected: 32-bit EL1 Support [ 0.232747] CPU: All CPU(s) started at EL2 [ 0.238266] devtmpfs: initialized [ 0.285315] Registered cp15_barrier emulation handler [ 0.285445] Registered setend emulation handler [ 0.285466] KASLR enabled [ 0.285711] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285733] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286594] pinctrl core: initialized pinctrl subsystem [ 0.287656] SMBIOS 3.0.0 present. [ 0.287683] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288317] NET: Registered protocol family 16 [ 0.290237] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.290712] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291347] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291410] audit: initializing netlink subsys (disabled) [ 0.291687] audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1 [ 0.292136] thermal_sys: Registered thermal governor 'step_wise' [ 0.292142] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292160] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294252] cpuidle: using governor menu [ 0.294597] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295041] ASID allocator initialised with 32768 entries [ 0.295275] Serial: AMBA PL011 UART driver [ 0.298930] Tegra reboot handler registered. [ 0.372041] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.372169] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.372380] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.372431] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.372567] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.372617] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.372733] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.372781] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372892] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372938] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.375083] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.375123] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.375158] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.375204] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.375252] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375283] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.375336] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375369] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375395] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375421] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.375446] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.375471] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.375497] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.375522] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.375547] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.375571] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.375596] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.375704] mc-err: mcerr ops are set to t19x [ 0.386928] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.386947] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.386958] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.386969] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.395223] ACPI: Interpreter disabled. [ 0.396910] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.398602] iommu: Default domain type: Translated [ 0.398689] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.399217] SCSI subsystem initialized [ 0.399418] usbcore: registered new interface driver usbfs [ 0.399474] usbcore: registered new interface driver hub [ 0.399525] usbcore: registered new device driver usb [ 0.400291] mc: Linux media interface: v0.10 [ 0.400362] videodev: Linux video capture interface: v2.00 [ 0.400982] pps_core: LinuxPPS API ver. 1 registered [ 0.401004] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401034] PTP clock support registered [ 0.401369] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.401690] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401887] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.402831] Registered efivars operations [ 0.411198] FPGA manager framework [ 0.411377] Advanced Linux Sound Architecture Driver Initialized. [ 0.412161] Bluetooth: Core ver 2.22 [ 0.412210] NET: Registered protocol family 31 [ 0.412226] Bluetooth: HCI device and connection manager initialized [ 0.412246] Bluetooth: HCI socket layer initialized [ 0.412263] Bluetooth: L2CAP socket layer initialized [ 0.412290] Bluetooth: SCO socket layer initialized [ 0.414204] camchar: rtcpu character device driver loaded [ 0.415063] clocksource: Switched to clocksource arch_sys_counter [ 0.876161] VFS: Disk quotas dquot_6.6.0 [ 0.876265] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.876637] pnp: PnP ACPI: disabled [ 0.891021] la/ptsa driver initialized. [ 0.891244] NET: Registered protocol family 2 [ 0.891466] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.901005] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.901168] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.901528] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.902158] TCP: Hash tables configured (established 65536 bind 65536) [ 0.902307] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.902437] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.902736] NET: Registered protocol family 1 [ 0.903380] RPC: Registered named UNIX socket transport module. [ 0.903399] RPC: Registered udp transport module. [ 0.903412] RPC: Registered tcp transport module. [ 0.903425] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.903460] PCI: CLS 0 bytes, default 64 [ 0.903773] Trying to unpack rootfs image as initramfs... [ 1.173269] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.176310] Freeing initrd memory: 8196K [ 1.181030] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.181087] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.181123] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.181648] kvm [1]: IPA Size Limit: 40 bits [ 1.182195] kvm [1]: vgic interrupt IRQ9 [ 1.182724] kvm [1]: VHE mode initialized successfully [ 1.184443] Initialise system trusted keyrings [ 1.184760] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.190435] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.191225] NFS: Registering the id_resolver key type [ 1.191258] Key type id_resolver registered [ 1.191272] Key type id_legacy registered [ 1.191351] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.191374] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.191410] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.201187] NET: Registered protocol family 38 [ 1.201209] Key type asymmetric registered [ 1.201263] Asymmetric key parser 'x509' registered [ 1.201308] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.201531] io scheduler mq-deadline registered [ 1.201548] io scheduler kyber registered [ 1.208049] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.211390] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.211499] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.211599] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.211687] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.211774] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.217600] scrncapt: init (heads:4 wins:6 planes:4) [ 1.217809] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.218878] EINJ: ACPI disabled. [ 1.222870] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.222928] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.222946] tegra-pmc: ### PMC reset level: L1 [ 1.222991] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.223106] tegra-pmc: PMC Prod config success [ 1.228694] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.249594] random: fast init done [ 1.257454] printk: console [ttyTCU0] enabled [ 2.786493] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.790993] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.795614] arm-smmu 10000000.iommu: stage 1 translation [ 2.801263] arm-smmu 10000000.iommu: stage 2 translation [ 2.806505] arm-smmu 10000000.iommu: nested translation [ 2.812118] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.819279] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.830121] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.832149] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.838987] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.846526] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.851747] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.856469] arm-smmu 12000000.iommu: stage 1 translation [ 2.861977] arm-smmu 12000000.iommu: stage 2 translation [ 2.867662] arm-smmu 12000000.iommu: nested translation [ 2.872849] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.880014] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.890821] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.893391] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.899951] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.907132] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.916719] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.920351] tegra_profiler: auth: init [ 2.924700] THERMAL EST: found 3 subdevs [ 2.927789] THERMAL EST num_resources: 0 [ 2.931897] [THERMAL EST subdev 0] [ 2.934936] [THERMAL EST subdev 1] [ 2.938623] [THERMAL EST subdev 2] [ 2.941610] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.948320] THERMAL EST: thz register success. [ 2.952568] THERMAL EST: end of probe, return err: 0 [ 2.957597] nvsciipc: loaded module [ 2.964682] tun: Universal TUN/TAP device driver, 1.6 [ 2.967489] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.973626] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.978927] e1000e: Intel(R) PRO/1000 Network Driver [ 2.983865] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.989937] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.995507] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.001778] PPP generic driver version 2.4.2 [ 3.005648] PPP BSD Compression module registered [ 3.010213] PPP Deflate Compression module registered [ 3.015461] PPP MPPE Compression module registered [ 3.020738] usbcore: registered new interface driver r8152 [ 3.026243] usbcore: registered new interface driver asix [ 3.031345] usbcore: registered new interface driver ax88179_178a [ 3.037442] usbcore: registered new interface driver cdc_ether [ 3.043653] usbcore: registered new interface driver net1080 [ 3.049255] usbcore: registered new interface driver cdc_subset [ 3.055038] usbcore: registered new interface driver zaurus [ 3.060988] usbcore: registered new interface driver cdc_ncm [ 3.066663] usbcore: registered new interface driver aqc111 [ 3.072329] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.078384] ohci-pci: OHCI PCI platform driver [ 3.082448] ohci-platform: OHCI generic platform driver [ 3.088350] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.094482] usbcore: registered new interface driver uas [ 3.098755] usbcore: registered new interface driver usb-storage [ 3.105136] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.110875] mousedev: PS/2 mouse device common for all mice [ 3.115881] usbcore: registered new interface driver xpad [ 3.123878] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.126594] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.134409] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.140897] i2c /dev entries driver [ 3.144295] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.150389] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.155363] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.160768] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.166190] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.171623] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.177318] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.190786] device-mapper: uevent: version 1.0.3 [ 3.191261] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.197532] cpuidle: Initializing cpuidle driver [ 3.201824] sdhci: Secure Digital Host Controller Interface driver [ 3.206472] sdhci: Copyright(c) Pierre Ossman [ 3.210313] Synopsys Designware Multimedia Card Interface Driver [ 3.216777] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.222537] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.223257] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.235792] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.258864] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.268685] vdd-1v0: supplied by regulator-dummy [ 3.274144] vdd-1v8-hs: supplied by regulator-dummy [ 3.278944] vdd-1v8-ls: supplied by regulator-dummy [ 3.283797] vdd-1v8-ao: supplied by regulator-dummy [ 3.287771] vddio-ddr-1v1: supplied by regulator-dummy [ 3.292302] vdd-rtc: supplied by regulator-dummy [ 3.294104] spmic-ldo1: supplied by regulator-dummy [ 3.295384] vdd-ao-3v3: supplied by regulator-dummy [ 3.301534] vddio-emmc-3v3: supplied by regulator-dummy [ 3.307919] spmic-ldo4: supplied by regulator-dummy [ 3.309163] vdd-usb-3v3: supplied by regulator-dummy [ 3.315409] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.321704] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.327283] spmic-ldo8: supplied by vdd-1v8-ls [ 3.328805] gpio-510 (gpio_default): hogged as output/high [ 3.330162] gpio-511 (gpio_default): hogged as output/high [ 3.333097] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.468719] max77686-rtc max77620-rtc: registered as rtc0 [ 3.469783] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.470102] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.304419] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.305685] hid: raw HID events driver (C) Jiri Kosina [ 4.306490] usbcore: registered new interface driver usbhid [ 4.306640] usbhid: USB HID core driver [ 4.308793] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.310166] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.342521] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.416913] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.200 ms) ÿá[ 4.394404] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.394918] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.396219] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.397038] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.399010] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.399915] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.400459] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.402053] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.402372] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.405037] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.410927] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.417533] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.422294] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.428639] denver_knobs_init:MTS_VERSION:55637613 [ 4.442650] t19x_cache tegra-cache: probed [ 4.446657] optee: probing for conduit method. [ 4.447546] optee: revision 3.16 (65cc2218) [ 4.448495] optee: dynamic shared memory is enabled [ 4.449798] optee: initialized driver [ 4.456634] nvpmodel: initialized successfully [ 4.457263] tegra_hv: get_hvd: not initialized yet [ 4.461948] user_ivc_mempool: hypervisor not present [ 4.467736] usbcore: registered new interface driver snd-usb-audio [ 4.474355] u32 classifier [ 4.475845] input device check on [ 4.479368] Actions configured [ 4.482804] Initializing XFRM netlink socket [ 4.487682] NET: Registered protocol family 10 [ 4.493788] Segment Routing with IPv6 [ 4.495011] NET: Registered protocol family 17 [ 4.499569] NET: Registered protocol family 15 [ 4.503720] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.517192] Bluetooth: RFCOMM socket layer initialized [ 4.521962] Bluetooth: RFCOMM ver 1.11 [ 4.526113] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.531740] Bluetooth: HIDP socket layer initialized [ 4.537712] 9pnet: Installing 9P2000 support [ 4.541461] Key type dns_resolver registered [ 4.546436] registered taskstats version 1 [ 4.549603] Loading compiled-in X.509 certificates [ 4.562972] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.565278] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.576099] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.577510] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.586604] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.594812] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.711160] tegra194-pcie 14160000.pcie: Link up [ 4.714242] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.714522] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.714683] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.714987] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.715263] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.715691] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.716126] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.728738] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.729272] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.729869] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.731501] pci 0004:01:00.0: supports D1 D2 [ 4.731697] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.742442] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.742833] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.743297] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.743751] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.744029] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.744337] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.746015] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.753461] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.761707] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.772382] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.777638] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.782618] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.789368] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.798721] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.799663] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.808350] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.816582] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.931807] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.932305] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.932585] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.932752] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.933068] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.933356] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.933708] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.934246] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.954185] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.954534] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.956228] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.957438] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.958726] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.960519] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.961479] pci 0005:00:00.0: Removing from iommu group 7 [ 5.961804] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.996527] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.018585] host1x 13e10000.host1x: initialized [ 6.020183] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.021221] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.022497] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.023468] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.024776] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.025530] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.026907] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.027839] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.029330] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.032060] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.042257] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.048961] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.058943] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.065652] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.075884] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.082735] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.092498] falcon 15340000.vic: Adding to iommu group 17 [ 6.107330] falcon 15340000.vic: initialized [ 6.108312] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.113475] falcon 15380000.nvjpg: initialized [ 6.114096] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.126790] falcon 154c0000.nvenc: initialized [ 6.127419] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.135823] falcon 15a80000.nvenc1: initialized [ 6.136425] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.148108] nvdec 15480000.nvdec: initialized [ 6.148731] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.157860] nvdec 15140000.nvdec1: initialized [ 6.158401] tsec 15500000.tsec: Adding to iommu group 18 [ 6.164245] tsec 15500000.tsec: initialized [ 6.164855] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.173839] tsec 15100000.tsecb: initialized [ 6.177777] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.205270] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.218536] gpio-374 (wifi-enable): hogged as output/high [ 6.218856] gpio-431 (camera-control-output-low): hogged as output/low [ 6.219323] gpio-432 (camera-control-output-low): hogged as output/low [ 6.221093] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.222907] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.223544] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.225185] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.229461] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.235187] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.240932] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.249247] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.256287] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.268287] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.273171] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.279148] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.287922] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.296865] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.304108] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.311794] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.318219] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.327972] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.334079] pva 16000000.pva0: Adding to iommu group 22 [ 6.360821] pva 16000000.pva0: initialized [ 6.365121] pva 16800000.pva1: Adding to iommu group 23 [ 6.377620] pva 16800000.pva1: initialized [ 6.381175] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.394357] nvdla 15880000.nvdla0: initialized [ 6.395746] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.412124] nvdla 158c0000.nvdla1: initialized [ 6.416140] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.416403] tegradc 15200000.display: Adding to iommu group 26 [ 6.416635] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.417285] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.417367] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.418113] tegradccommon 15200000.display-hub: dma mapping done [ 6.418491] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.419398] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.423891] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.426386] tegradc 15210000.display: Adding to iommu group 26 [ 6.428964] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.428981] tegra_cec 3960000.tegra_cec: probed [ 6.429662] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.437347] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.443221] generic_infoframe_type: 0x87 [ 6.446997] kfuse 3830000.kfuse: initialized [ 6.451973] tegradc 15200000.display: DT parsed successfully [ 6.459354] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.462824] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.466821] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.476595] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.480097] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.487255] random: crng init done [ 6.511461] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.519576] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.519853] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.528455] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.538098] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.542393] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.543970] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.566097] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.569213] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.575336] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.582350] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.587668] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.596140] tegradc 15210000.display: disp0 connected to head1->sor [ 6.609639] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.615146] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.616630] tegradc 15210000.display: DT parsed successfully [ 6.626200] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.626295] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.631903] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.637980] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.662047] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.668454] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.676175] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.683510] usb usb1: Product: xHCI Host Controller [ 6.688210] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.694341] usb usb1: SerialNumber: 3610000.xhci [ 6.700107] hub 1-0:1.0: USB hub found [ 6.703333] hub 1-0:1.0: 4 ports detected [ 6.707830] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.712566] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.720335] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.727989] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.735726] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.742957] usb usb2: Product: xHCI Host Controller [ 6.748148] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.754357] usb usb2: SerialNumber: 3610000.xhci [ 6.760177] hub 2-0:1.0: USB hub found [ 6.762567] hub 2-0:1.0: 4 ports detected [ 6.802778] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.808614] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.810097] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.810284] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.823380] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.824534] tegra194-cpufreq ccplex: probed with BWMGR [ 6.825616] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.826164] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.826648] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.827904] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.836822] mmc0: CQHCI version 5.10 [ 6.838954] tegra194-vi5 15c10000.vi: initialized [ 6.841217] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.842070] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.846684] generic_infoframe_type: 0x87 [ 6.853168] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.856608] tegradc 15200000.display: DT parsed successfully [ 6.864746] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.870269] tegradc 15200000.display: Display dc.00000000a8180001 registered with id=0 [ 6.876770] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.876781] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.885987] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.891550] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.899121] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.906511] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.906524] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.910560] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.912640] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.912647] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.957705] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.957782] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.962966] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.976962] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.977274] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.983684] nvethernet 2490000.ethernet: Macsec not supported [ 6.984992] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.995772] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 7.001453] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 7.008462] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 7.015909] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.023959] tegradc 15200000.display: probed [ 7.029105] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.048769] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.055566] tegra-se-nvhost 15810000.se: initialized [ 7.063628] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.065338] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.071656] tegra-se-nvhost 15820000.se: initialized [ 7.071930] mmc0: Command Queue Engine enabled [ 7.077887] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.080143] mmc0: periodic cache flush enabled [ 7.086929] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.091145] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.097991] tegra-se-nvhost 15830000.se: initialized [ 7.104440] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.109677] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.113509] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.120095] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.132988] Console: switching to colour frame buffer device 240x67 [ 7.139038] tegradc 15200000.display: fb registered [ 7.144068] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.150243] tegra-se-nvhost 15840000.se: initialized [ 7.150917] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.156204] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.160649] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.168400] tegra_actmon d230000.actmon: in actmon_register()... [ 7.174839] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.178779] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.180670] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.180677] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.180680] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.180684] usb 1-2: Manufacturer: Generic [ 7.182566] hub 1-2:1.0: USB hub found [ 7.183611] hub 1-2:1.0: 4 ports detected [ 7.224699] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.233423] hvc_sysfs: hypervisor is not present [ 7.234073] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.265854] ALSA device list: [ 7.265958] No soundcards found. [ 7.267077] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.267327] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.268762] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.275423] Extcon AUX1(HDMI) enable [ 7.279158] tegradc 15210000.display: disp1 connected to head1->sor [ 7.285377] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.292276] tegradc 15210000.display: DT parsed successfully [ 7.298051] tegradc 15210000.display: Display dc.00000000f2e178af registered with id=1 [ 7.304066] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.306099] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.319361] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.332702] tegradc 15210000.display: probed [ 7.333045] tegradc 15210000.display: fb registered [ 7.338570] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.342183] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.342236] Freeing unused kernel memory: 3968K [ 7.348585] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.348591] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.348595] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.348598] usb 2-3: Manufacturer: Generic [ 7.350229] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.359383] hub 2-3:1.0: USB hub found [ 7.375263] Run /init as init process [ 7.381406] hub 2-3:1.0: 4 ports detected [ 7.396307] tegradc 15210000.display: blank - powerdown [ 7.401188] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.401192] Extcon DP: HPD disabled [ 7.401195] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.401213] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.425740] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.425832] tegradc 15200000.display: blank - powerdown [ 7.427116] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.460343] Root device found: mmcblk0p1 [ 7.462329] Found dev node: /dev/mmcblk0p1 [ 7.467810] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.467814] Extcon AUX1(HDMI) disable [ 7.471090] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.491072] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.491674] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.491679] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.491977] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.497977] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.502048] Rootfs mounted over mmcblk0p1 [ 7.505793] tegradc 15200000.display: unblank [ 7.506871] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.507086] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.513064] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.514949] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.518951] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.518955] Extcon AUX1(HDMI) enable [ 7.531751] tegradc 15200000.display: sync windows ret = 246 [ 7.543829] Switching from initrd to actual rootfs [ 7.578707] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.585665] Extcon HDMI: HPD enabled [ 7.589544] tegradc 15200000.display: hdmi: plugged [ 7.624358] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.625870] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.627381] usb 1-3: Product: Bluetooth Radio [ 7.628799] usb 1-3: Manufacturer: Realtek [ 7.630200] usb 1-3: SerialNumber: 00e04c000001 [ 7.754548] systemd[1]: System time before build time, advancing clock. [ 7.822080] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.827214] systemd[1]: Detected architecture arm64. [ 7.868194] systemd[1]: Set hostname to . [ 8.037806] systemd-sysv-generator[250]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.376193] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.378024] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.383666] systemd[1]: Created slice system-modprobe.slice. [ 8.388520] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.392902] systemd[1]: Created slice User and Session Slice. [ 8.396564] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.400930] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.404451] systemd[1]: Reached target User and Group Name Lookups. [ 8.407817] systemd[1]: Reached target Slices. [ 8.411085] systemd[1]: Reached target Swap. [ 8.415324] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.419159] systemd[1]: Listening on Syslog Socket. [ 8.422904] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.426467] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.430888] systemd[1]: Listening on Journal Audit Socket. [ 8.434728] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.439336] systemd[1]: Listening on Journal Socket. [ 8.443566] systemd[1]: Listening on udev Control Socket. [ 8.448823] systemd[1]: Listening on udev Kernel Socket. [ 8.457602] systemd[1]: Mounting Huge Pages File System... [ 8.466135] systemd[1]: Mounting POSIX Message Queue File System... [ 8.474225] systemd[1]: Mounting RPC Pipe File System... [ 8.482782] systemd[1]: Mounting Kernel Debug File System... [ 8.491405] systemd[1]: Mounting Kernel Trace File System... [ 8.500993] systemd[1]: Starting Journal Service... [ 8.509933] systemd[1]: Starting Set the console keyboard layout... [ 8.518245] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.522043] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.528477] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.537487] systemd[1]: Started Nameserver information manager. [ 8.542945] systemd[1]: Reached target Network (Pre). [ 8.549868] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.551764] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.560595] systemd[1]: Starting Load Kernel Modules... [ 8.568205] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.577231] systemd[1]: Starting udev Coldplug all Devices... [ 8.587434] systemd[1]: Mounted Huge Pages File System. [ 8.591269] systemd[1]: Mounted POSIX Message Queue File System. [ 8.594996] systemd[1]: Mounted RPC Pipe File System. [ 8.599659] systemd[1]: Mounted Kernel Debug File System. [ 8.599900] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.599996] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.606139] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.606146] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.606155] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.606158] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.606354] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.606544] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.606678] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.606685] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.622353] systemd[1]: Mounted Kernel Trace File System. [ 8.629177] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.634207] systemd[1]: nvfb-udev.service: Succeeded. [ 8.638418] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.648314] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.661502] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.663679] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.670885] systemd[1]: Starting Load/Save Random Seed... [ 8.679776] systemd[1]: Starting Create System Users... [ 8.694818] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.694818] [ 8.738876] systemd[1]: Finished Load Kernel Modules. [ 8.745717] systemd[1]: Finished Load/Save Random Seed. [ 8.752656] systemd[1]: Finished Create System Users. [ 8.757287] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.764050] systemd[1]: Mounting Kernel Configuration File System... [ 8.772323] systemd[1]: Started OP-TEE Client Supplicant. [ 8.781467] systemd[1]: Starting Apply Kernel Variables... [ 8.790383] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.800888] systemd[1]: Finished Set the console keyboard layout. [ 8.807868] systemd[1]: Mounted Kernel Configuration File System. [ 10.236037] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.242551] imx219 9-0010: board setup failed [ 10.242633] imx219: probe of 9-0010 failed with error -121 [ 10.267348] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.285595] imx219 10-0010: board setup failed [ 10.285688] imx219: probe of 10-0010 failed with error -121 [ 10.372060] hot-surface-alert cooling state: 0 -> 1 [ 11.157038] using random self ethernet address [ 11.158755] using random host ethernet address [ 11.826436] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.828246] Creating 1 MTD partitions on "spi6.0": [ 11.830058] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.498588] using random self ethernet address [ 12.500321] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.804594] nvidia: loading out-of-tree module taints kernel. [ 59.280834] watchdog: watchdog0: watchdog did not stop! [ 59.760969] Trying to unregister non-registered hwtime source [ 62.818629] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.820997] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy : 1, ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNIÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäNG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.642] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.743] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000785] Console: colour dummy device 80x25 [ 0.002129] printk: console [tty0] enabled [ 0.002199] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002235] pid_max: default: 32768 minimum: 301 [ 0.002419] LSM: Security Framework initializing [ 0.002480] Yama: becoming mindful. [ 0.002523] SELinux: Initializing. [ 0.002688] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002748] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005895] rcu: Hierarchical SRCU implementation. [ 0.006139] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007145] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007213] DTB Build time: Aug 10 2022 20:31:49 [ 0.010843] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011185] Remapping and enabling EFI services. [ 0.013375] smp: Bringing up secondary CPUs ... [ 0.042702] Detected PIPT I-cache on CPU1 [ 0.042815] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072317] Detected PIPT I-cache on CPU2 [ 0.072427] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101990] Detected PIPT I-cache on CPU3 [ 0.102119] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131806] Detected PIPT I-cache on CPU4 [ 0.131906] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161704] Detected PIPT I-cache on CPU5 [ 0.161862] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162199] smp: Brought up 1 node, 6 CPUs [ 0.162426] SMP: Total of 6 processors activated. [ 0.162447] CPU features: detected: Privileged Access Never [ 0.162466] CPU features: detected: LSE atomic instructions [ 0.162485] CPU features: detected: User Access Override [ 0.162504] CPU features: detected: 32-bit EL0 Support [ 0.162540] CPU features: detected: RAS Extension Support [ 0.162570] CPU features: detected: CRC32 instructions [ 0.162590] CPU features: detected: 32-bit EL1 Support [ 0.231128] CPU: All CPU(s) started at EL2 [ 0.236755] devtmpfs: initialized [ 0.287734] Registered cp15_barrier emulation handler [ 0.287821] Registered setend emulation handler [ 0.287841] KASLR enabled [ 0.288101] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288124] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289480] pinctrl core: initialized pinctrl subsystem [ 0.290603] SMBIOS 3.0.0 present. [ 0.290632] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291311] NET: Registered protocol family 16 [ 0.293245] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293771] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294456] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294511] audit: initializing netlink subsys (disabled) [ 0.294749] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.295109] thermal_sys: Registered thermal governor 'step_wise' [ 0.295117] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295132] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.297263] cpuidle: using governor menu [ 0.297618] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.298083] ASID allocator initialised with 32768 entries [ 0.298331] Serial: AMBA PL011 UART driver [ 0.301742] Tegra reboot handler registered. [ 0.375268] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375362] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.375550] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.375590] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.375738] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.375776] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.375884] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.375919] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376031] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376067] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.378243] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.378276] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.378302] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.378327] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.378354] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.378401] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.378457] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.378484] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.378514] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.378537] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.378558] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.378580] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.378601] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.378622] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.378643] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.378664] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.378689] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.378769] mc-err: mcerr ops are set to t19x [ 0.391052] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391074] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.391086] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391097] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397880] ACPI: Interpreter disabled. [ 0.399026] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400241] iommu: Default domain type: Translated [ 0.400307] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400661] SCSI subsystem initialized [ 0.400843] usbcore: registered new interface driver usbfs [ 0.400888] usbcore: registered new interface driver hub [ 0.400921] usbcore: registered new device driver usb [ 0.401302] mc: Linux media interface: v0.10 [ 0.401336] videodev: Linux video capture interface: v2.00 [ 0.401626] pps_core: LinuxPPS API ver. 1 registered [ 0.401637] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401656] PTP clock support registered [ 0.401855] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.402267] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.402341] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.402932] Registered efivars operations [ 0.408481] FPGA manager framework [ 0.408584] Advanced Linux Sound Architecture Driver Initialized. [ 0.409161] Bluetooth: Core ver 2.22 [ 0.409200] NET: Registered protocol family 31 [ 0.409214] Bluetooth: HCI device and connection manager initialized [ 0.409229] Bluetooth: HCI socket layer initialized [ 0.409244] Bluetooth: L2CAP socket layer initialized [ 0.409266] Bluetooth: SCO socket layer initialized [ 0.410904] camchar: rtcpu character device driver loaded [ 0.411668] clocksource: Switched to clocksource arch_sys_counter [ 0.816539] VFS: Disk quotas dquot_6.6.0 [ 0.816631] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.817083] pnp: PnP ACPI: disabled [ 0.833018] la/ptsa driver initialized. [ 0.833192] NET: Registered protocol family 2 [ 0.833442] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.841853] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.842080] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.842466] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.843100] TCP: Hash tables configured (established 65536 bind 65536) [ 0.843279] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.843449] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.843814] NET: Registered protocol family 1 [ 0.844512] RPC: Registered named UNIX socket transport module. [ 0.844531] RPC: Registered udp transport module. [ 0.844544] RPC: Registered tcp transport module. [ 0.844556] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.844576] PCI: CLS 0 bytes, default 64 [ 0.844883] Trying to unpack rootfs image as initramfs... [ 1.119113] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.122205] Freeing initrd memory: 8196K [ 1.126863] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.126898] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.126929] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.127362] kvm [1]: IPA Size Limit: 40 bits [ 1.127941] kvm [1]: vgic interrupt IRQ9 [ 1.128437] kvm [1]: VHE mode initialized successfully [ 1.130153] Initialise system trusted keyrings [ 1.130479] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.138528] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.139541] NFS: Registering the id_resolver key type [ 1.139605] Key type id_resolver registered [ 1.139658] Key type id_legacy registered [ 1.139801] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.139849] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.139892] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.151295] NET: Registered protocol family 38 [ 1.151318] Key type asymmetric registered [ 1.151333] Asymmetric key parser 'x509' registered [ 1.151376] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.151693] io scheduler mq-deadline registered [ 1.151712] io scheduler kyber registered [ 1.158745] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.161795] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.161869] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.161936] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.162002] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.162067] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.168305] scrncapt: init (heads:4 wins:6 planes:4) [ 1.168376] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.169449] EINJ: ACPI disabled. [ 1.173253] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.173278] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.173292] tegra-pmc: ### PMC reset level: L1 [ 1.173306] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.173352] tegra-pmc: PMC Prod config success [ 1.178674] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.183870] random: fast init done [ 1.184451] printk: console [ttyTCU0] enabled [ 2.735875] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.740804] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.745451] arm-smmu 10000000.iommu: stage 1 translation [ 2.750884] arm-smmu 10000000.iommu: stage 2 translation [ 2.756109] arm-smmu 10000000.iommu: nested translation [ 2.761720] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.768888] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.780123] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.781984] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.788568] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.796123] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.801353] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.806088] arm-smmu 12000000.iommu: stage 1 translation [ 2.811839] arm-smmu 12000000.iommu: stage 2 translation [ 2.817012] arm-smmu 12000000.iommu: nested translation [ 2.822435] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.829871] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.840969] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.842970] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.849298] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.857013] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.866748] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.869719] tegra_profiler: auth: init [ 2.874225] THERMAL EST: found 3 subdevs [ 2.877392] THERMAL EST num_resources: 0 [ 2.881491] [THERMAL EST subdev 0] [ 2.884560] [THERMAL EST subdev 1] [ 2.888228] [THERMAL EST subdev 2] [ 2.891221] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.897713] THERMAL EST: thz register success. [ 2.901923] THERMAL EST: end of probe, return err: 0 [ 2.907496] nvsciipc: loaded module [ 2.914629] tun: Universal TUN/TAP device driver, 1.6 [ 2.916917] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.923237] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.928543] e1000e: Intel(R) PRO/1000 Network Driver [ 2.933728] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.939559] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.945104] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.951270] PPP generic driver version 2.4.2 [ 2.955513] PPP BSD Compression module registered [ 2.960077] PPP Deflate Compression module registered [ 2.965324] PPP MPPE Compression module registered [ 2.970371] usbcore: registered new interface driver r8152 [ 2.975591] usbcore: registered new interface driver asix [ 2.980929] usbcore: registered new interface driver ax88179_178a [ 2.987046] usbcore: registered new interface driver cdc_ether [ 2.993267] usbcore: registered new interface driver net1080 [ 2.998596] usbcore: registered new interface driver cdc_subset [ 3.004891] usbcore: registered new interface driver zaurus [ 3.010603] usbcore: registered new interface driver cdc_ncm [ 3.016265] usbcore: registered new interface driver aqc111 [ 3.021932] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.027735] ohci-pci: OHCI PCI platform driver [ 3.032028] ohci-platform: OHCI generic platform driver [ 3.037937] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.044517] usbcore: registered new interface driver uas [ 3.048620] usbcore: registered new interface driver usb-storage [ 3.054508] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.060713] mousedev: PS/2 mouse device common for all mice [ 3.065764] usbcore: registered new interface driver xpad [ 3.073542] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.076247] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.084012] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.090594] i2c /dev entries driver [ 3.093913] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.099810] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.105359] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.110674] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.115987] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.121521] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.126961] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.140511] device-mapper: uevent: version 1.0.3 [ 3.140943] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.147514] cpuidle: Initializing cpuidle driver [ 3.151271] sdhci: Secure Digital Host Controller Interface driver [ 3.155825] sdhci: Copyright(c) Pierre Ossman [ 3.159920] Synopsys Designware Multimedia Card Interface Driver [ 3.166127] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.172282] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.172923] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.185675] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.202497] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.211399] vdd-1v0: supplied by regulator-dummy [ 3.216798] vdd-1v8-hs: supplied by regulator-dummy [ 3.221514] vdd-1v8-ls: supplied by regulator-dummy [ 3.226196] vdd-1v8-ao: supplied by regulator-dummy [ 3.230015] vddio-ddr-1v1: supplied by regulator-dummy [ 3.234342] vdd-rtc: supplied by regulator-dummy [ 3.235969] spmic-ldo1: supplied by regulator-dummy [ 3.237121] vdd-ao-3v3: supplied by regulator-dummy [ 3.243153] vddio-emmc-3v3: supplied by regulator-dummy [ 3.249315] spmic-ldo4: supplied by regulator-dummy [ 3.250446] vdd-usb-3v3: supplied by regulator-dummy [ 3.257108] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.263268] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.268734] spmic-ldo8: supplied by vdd-1v8-ls [ 3.270110] gpio-510 (gpio_default): hogged as output/high [ 3.272328] gpio-511 (gpio_default): hogged as output/high [ 3.279207] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.418044] max77686-rtc max77620-rtc: registered as rtc0 [ 3.419272] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.419556] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.146742] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.147861] hid: raw HID events driver (C) Jiri Kosina [ 4.148500] usbcore: registered new interface driver usbhid [ 4.148641] usbhid: USB HID core driver [ 4.150380] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.151490] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.180342] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.255719] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.186 ms) ÿá[ 4.236453] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.237019] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.238019] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.238636] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.240386] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.241085] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.241684] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.243087] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.243414] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.245499] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.252968] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.259459] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.264694] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.271781] denver_knobs_init:MTS_VERSION:55637613 [ 4.282263] t19x_cache tegra-cache: probed [ 4.284633] optee: probing for conduit method. [ 4.285458] optee: revision 3.16 (65cc2218) [ 4.286714] optee: dynamic shared memory is enabled [ 4.292131] optee: initialized driver [ 4.298139] nvpmodel: initialized successfully [ 4.299315] tegra_hv: get_hvd: not initialized yet [ 4.304101] user_ivc_mempool: hypervisor not present [ 4.310078] usbcore: registered new interface driver snd-usb-audio [ 4.316301] u32 classifier [ 4.317798] input device check on [ 4.321643] Actions configured [ 4.324932] Initializing XFRM netlink socket [ 4.329776] NET: Registered protocol family 10 [ 4.336104] Segment Routing with IPv6 [ 4.337163] NET: Registered protocol family 17 [ 4.341792] NET: Registered protocol family 15 [ 4.346227] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.360108] Bluetooth: RFCOMM socket layer initialized [ 4.364513] Bluetooth: RFCOMM ver 1.11 [ 4.368307] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.374101] Bluetooth: HIDP socket layer initialized [ 4.379943] 9pnet: Installing 9P2000 support [ 4.383495] Key type dns_resolver registered [ 4.388997] registered taskstats version 1 [ 4.391715] Loading compiled-in X.509 certificates [ 4.404660] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.407507] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.417904] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.419614] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.428482] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.436587] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.551742] tegra194-pcie 14160000.pcie: Link up [ 4.554719] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.554895] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.555120] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.555352] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.555584] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.556005] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.556454] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.568578] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.569120] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.569595] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.571051] pci 0004:01:00.0: supports D1 D2 [ 4.571226] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.582475] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.582889] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.583172] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.583764] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.584154] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.584356] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.586563] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.593996] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.602284] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.612723] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.616928] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.622479] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.629706] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.638591] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.640457] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.648665] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.657386] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.772522] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.772912] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.773172] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.773294] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.773661] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.773870] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.774260] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.774691] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.794312] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.794559] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.796358] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.797402] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.798544] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.800047] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.800934] pci 0005:00:00.0: Removing from iommu group 7 [ 5.801340] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.834474] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.858495] host1x 13e10000.host1x: initialized [ 5.860421] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.861397] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.862868] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.863824] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.865214] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.865902] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.867130] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.867993] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.869052] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.872920] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.882602] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.889646] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.899783] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.906739] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.916689] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.923576] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.933242] falcon 15340000.vic: Adding to iommu group 17 [ 5.948365] falcon 15340000.vic: initialized [ 5.949367] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.955338] falcon 15380000.nvjpg: initialized [ 5.956092] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.967195] falcon 154c0000.nvenc: initialized [ 5.968197] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.976972] falcon 15a80000.nvenc1: initialized [ 5.977724] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.989256] nvdec 15480000.nvdec: initialized [ 5.990089] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.000341] nvdec 15140000.nvdec1: initialized [ 6.001224] tsec 15500000.tsec: Adding to iommu group 18 [ 6.007460] tsec 15500000.tsec: initialized [ 6.008171] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.014176] tsec 15100000.tsecb: initialized [ 6.018531] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.044858] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.058060] gpio-374 (wifi-enable): hogged as output/high [ 6.058400] gpio-431 (camera-control-output-low): hogged as output/low [ 6.058645] gpio-432 (camera-control-output-low): hogged as output/low [ 6.060450] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.062385] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.062872] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.064733] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.070353] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.075987] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.081677] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.090096] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.097260] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.109116] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.114059] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.119847] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.128387] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.137952] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.145142] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.152681] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.158689] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.168718] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.174571] pva 16000000.pva0: Adding to iommu group 22 [ 6.201699] pva 16000000.pva0: initialized [ 6.206454] pva 16800000.pva1: Adding to iommu group 23 [ 6.217695] pva 16800000.pva1: initialized [ 6.221516] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.235939] nvdla 15880000.nvdla0: initialized [ 6.237507] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.246901] nvdla 158c0000.nvdla1: initialized [ 6.250829] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.251222] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.251318] tegradc 15200000.display: Adding to iommu group 26 [ 6.252788] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.253373] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.253752] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.253858] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.254173] tegradccommon 15200000.display-hub: dma mapping done [ 6.258653] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.260669] tegradc 15210000.display: Adding to iommu group 26 [ 6.275899] tegra_cec 3960000.tegra_cec: probed [ 6.281649] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.289149] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.293180] kfuse 3830000.kfuse: initialized [ 6.297793] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.303896] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.310753] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.317030] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.327231] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.331956] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.341019] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.346284] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.367808] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.368231] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.369518] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.377708] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.386347] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.393227] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.400508] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.407663] usb usb1: Product: xHCI Host Controller [ 6.412895] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.419233] usb usb1: SerialNumber: 3610000.xhci [ 6.425079] hub 1-0:1.0: USB hub found [ 6.427828] hub 1-0:1.0: 4 ports detected [ 6.432382] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.437177] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.444777] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.452568] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.460083] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.467333] usb usb2: Product: xHCI Host Controller [ 6.472606] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.478830] usb usb2: SerialNumber: 3610000.xhci [ 6.484286] hub 2-0:1.0: USB hub found [ 6.487221] hub 2-0:1.0: 4 ports detected [ 6.532655] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.538468] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.540066] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.540275] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.553637] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.554727] tegra194-cpufreq ccplex: probed with BWMGR [ 6.555865] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.556330] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.556820] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.557932] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.565645] tegra194-vi5 15c10000.vi: initialized [ 6.567345] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.567671] generic_infoframe_type: 0x87 [ 6.568810] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.571418] tegradc 15200000.display: DT parsed successfully [ 6.577859] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.583438] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.584724] mmc0: CQHCI version 5.10 [ 6.591301] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.591309] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.591314] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.591318] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.603684] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.606798] random: crng init done [ 6.610698] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.611679] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.616064] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.616075] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.622621] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.622625] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.622943] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.630405] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.635316] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.635699] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.648459] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.654997] nvethernet 2490000.ethernet: Macsec not supported [ 6.656341] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.661671] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.669441] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.678841] tegradc 15200000.display: probed [ 6.684618] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.691710] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.698239] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.698727] mmc0: Command Queue Engine enabled [ 6.698732] mmc0: periodic cache flush enabled [ 6.698751] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.699379] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.699614] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.709189] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.716861] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.817053] Console: switching to colour frame buffer device 240x67 [ 6.818577] tegra-se-nvhost 15810000.se: initialized [ 6.822837] tegradc 15200000.display: fb registered [ 6.822921] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.833051] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.839324] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.845119] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.850870] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.857573] tegra-se-nvhost 15820000.se: initialized [ 6.869624] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.874423] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.881285] tegra-se-nvhost 15830000.se: initialized [ 6.885915] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.891649] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.898113] tegra-se-nvhost 15840000.se: initialized [ 6.903808] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.904174] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.910768] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.910773] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.910777] usb 1-2: Manufacturer: Generic [ 6.917110] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.925334] hub 1-2:1.0: USB hub found [ 6.925958] tegra_actmon d230000.actmon: in actmon_register()... [ 6.926115] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.927884] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.928470] hvc_sysfs: hypervisor is not present [ 6.953962] ALSA device list: [ 6.969825] hub 1-2:1.0: 4 ports detected [ 6.973232] No soundcards found. [ 6.980526] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.987775] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.996431] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.002900] Extcon AUX1(HDMI) enable [ 7.006779] tegradc 15210000.display: disp1 connected to head1->sor [ 7.012686] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.020026] tegradc 15210000.display: DT parsed successfully [ 7.025761] tegradc 15210000.display: Display dc.00000000295eedaa registered with id=1 [ 7.033912] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 7.036536] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.039575] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 7.060350] tegradc 15210000.display: probed [ 7.060687] tegradc 15210000.display: fb registered [ 7.065894] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.068814] Freeing unused kernel memory: 3968K [ 7.070110] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.080762] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.082640] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.090840] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.103402] tegradc 15210000.display: blank - powerdown [ 7.103418] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.103511] Run /init as init process [ 7.108435] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.108439] Extcon DP: HPD disabled [ 7.108442] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.108451] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.108456] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.148252] usb 2-3: Manufacturer: Generic [ 7.163686] hub 2-3:1.0: USB hub found [ 7.165669] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.168405] tegradc 15200000.display: blank - powerdown [ 7.201000] Root device found: mmcblk0p1 [ 7.203063] Found dev node: /dev/mmcblk0p1 [ 7.217592] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.217598] Extcon AUX1(HDMI) disable [ 7.223709] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.238062] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.241032] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.241936] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.242595] Rootfs mounted over mmcblk0p1 [ 7.255825] tegradc 15200000.display: unblank [ 7.257087] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.257274] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.263312] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.265214] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.267694] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.267699] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.269560] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.269563] Extcon AUX1(HDMI) enable [ 7.278783] Switching from initrd to actual rootfs [ 7.281981] tegradc 15200000.display: sync windows ret = 247 [ 7.316245] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.321596] Extcon HDMI: HPD enabled [ 7.325277] tegradc 15200000.display: hdmi: plugged [ 7.373012] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.374409] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.375750] usb 1-3: Product: Bluetooth Radio [ 7.377002] usb 1-3: Manufacturer: Realtek [ 7.378242] usb 1-3: SerialNumber: 00e04c000001 [ 7.445387] systemd[1]: System time before build time, advancing clock. [ 7.515109] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.520014] systemd[1]: Detected architecture arm64. [ 7.577054] systemd[1]: Set hostname to . [ 7.744059] systemd-sysv-generator[241]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.091075] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.092896] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.098723] systemd[1]: Created slice system-modprobe.slice. [ 8.103711] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.107898] systemd[1]: Created slice User and Session Slice. [ 8.111245] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.115303] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.118608] systemd[1]: Reached target User and Group Name Lookups. [ 8.121912] systemd[1]: Reached target Slices. [ 8.125016] systemd[1]: Reached target Swap. [ 8.128971] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.132700] systemd[1]: Listening on Syslog Socket. [ 8.136236] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.139593] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.143815] systemd[1]: Listening on Journal Audit Socket. [ 8.147370] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.151145] systemd[1]: Listening on Journal Socket. [ 8.154867] systemd[1]: Listening on udev Control Socket. [ 8.158345] systemd[1]: Listening on udev Kernel Socket. [ 8.167957] systemd[1]: Mounting Huge Pages File System... [ 8.177818] systemd[1]: Mounting POSIX Message Queue File System... [ 8.185890] systemd[1]: Mounting RPC Pipe File System... [ 8.194263] systemd[1]: Mounting Kernel Debug File System... [ 8.202484] systemd[1]: Mounting Kernel Trace File System... [ 8.212553] systemd[1]: Starting Journal Service... [ 8.221245] systemd[1]: Starting Set the console keyboard layout... [ 8.229571] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.233099] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.239342] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.247666] systemd[1]: Started Nameserver information manager. [ 8.252496] systemd[1]: Reached target Network (Pre). [ 8.259424] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.261732] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.268531] systemd[1]: Starting Load Kernel Modules... [ 8.276443] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.285402] systemd[1]: Starting udev Coldplug all Devices... [ 8.295302] systemd[1]: Mounted Huge Pages File System. [ 8.299241] systemd[1]: Mounted POSIX Message Queue File System. [ 8.304043] systemd[1]: Mounted RPC Pipe File System. [ 8.306149] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.309602] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.311792] systemd[1]: Mounted Kernel Debug File System. [ 8.311893] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.314807] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.314819] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.314823] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.315110] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.316592] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.322500] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.322514] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.329022] systemd[1]: Mounted Kernel Trace File System. [ 8.338557] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.344984] systemd[1]: nvfb-udev.service: Succeeded. [ 8.349702] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.363067] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.375126] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.377503] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.383933] systemd[1]: Starting Load/Save Random Seed... [ 8.393458] systemd[1]: Starting Create System Users... [ 8.426759] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.426759] [ 8.457123] systemd[1]: Finished Load/Save Random Seed. [ 8.464745] systemd[1]: Finished Create System Users. [ 8.471417] systemd[1]: Finished Load Kernel Modules. [ 8.475820] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.482120] systemd[1]: Mounting Kernel Configuration File System... [ 8.490385] systemd[1]: Started OP-TEE Client Supplicant. [ 8.498804] systemd[1]: Starting Apply Kernel Variables... [ 8.506363] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.516535] systemd[1]: Finished Set the console keyboard layout. [ 8.523053] systemd[1]: Mounted Kernel Configuration File System. [ 9.807788] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.814419] imx219 9-0010: board setup failed [ 9.814504] imx219: probe of 9-0010 failed with error -121 [ 9.827077] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.833708] imx219 10-0010: board setup failed [ 9.835073] imx219: probe of 10-0010 failed with error -121 [ 9.899364] hot-surface-alert cooling state: 0 -> 1 [ 10.859805] using random self ethernet address [ 10.861509] using random host ethernet address [ 11.561217] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.562884] Creating 1 MTD partitions on "spi6.0": [ 11.565165] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.287905] using random self ethernet address [ 12.289499] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.806258] nvidia: loading out-of-tree module taints kernel. [ 58.864113] watchdog: watchdog0: watchdog did not stop! [ 59.344667] Trying to unregister non-registered hwtime source [ 62.402363] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.404464] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿänalÿâadc initialized ÿä ÿâfmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized noc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 202ÿâavfs_clk_platform_post initialized ÿä2 aÿâcvc_late initialized regulator_post initialized ÿäarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.609] W> set volts not configured for 'vdd-1v0' [0003.615] W> set volts not configured for 'vdd-1v8-hs' [0003.615] I> retrieved tmds range from prod_list_hdmi_soc [0003.623] E> invalid display type [0003.624] E> cannot find any other nvdisp nodes [0003.641] I> edid read success [0003.654] I> edid read success [0003.654] I> width = 640, height = 480, frequency = 25174825 [0003.655] I> width = 1920, height = 1080, frequency = 148500000 [0003.655] I> width = 1280, height = 768, frequency = 79500000 [0003.655] I> width = 1360, height = 768, frequency = 85500000 [0003.656] I> width = 720, height = 480, frequency = 26973026 [0003.660] I> width = 720, height = 576, frequency = 26973026 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1280, height = 720, frequency = 74175824 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 1920, height = 1080, frequency = 148351648 [0003.688] I> width = 720, height = 480, frequency = 26973026 [0003.693] I> width = 720, height = 576, frequency = 26973026 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 3840, height = 2160, frequency = 296703296 [0003.722] I> width = 4096, height = 2160, frequency = 296703296 [0003.728] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.739] I> hdmi_enable, starting HDMI initialisation [0003.744] I> hdmi_enable, HDMI initialisation complete [0003.753] initializing target [0003.754] calling apps_init() [0003.755] starting app kernel_boot_app [0003.756] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000707] Console: colour dummy device 80x25 [ 0.002074] printk: console [tty0] enabled [ 0.002138] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002173] pid_max: default: 32768 minimum: 301 [ 0.002397] LSM: Security Framework initializing [ 0.002473] Yama: becoming mindful. [ 0.002516] SELinux: Initializing. [ 0.002692] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002741] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005825] rcu: Hierarchical SRCU implementation. [ 0.006120] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006798] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006848] DTB Build time: Aug 10 2022 20:31:49 [ 0.009603] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009852] Remapping and enabling EFI services. [ 0.011756] smp: Bringing up secondary CPUs ... [ 0.040987] Detected PIPT I-cache on CPU1 [ 0.041069] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070721] Detected PIPT I-cache on CPU2 [ 0.070873] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100544] Detected PIPT I-cache on CPU3 [ 0.100686] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130392] Detected PIPT I-cache on CPU4 [ 0.130603] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160354] Detected PIPT I-cache on CPU5 [ 0.160506] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160948] smp: Brought up 1 node, 6 CPUs [ 0.161073] SMP: Total of 6 processors activated. [ 0.161162] CPU features: detected: Privileged Access Never [ 0.161184] CPU features: detected: LSE atomic instructions [ 0.161197] CPU features: detected: User Access Override [ 0.161209] CPU features: detected: 32-bit EL0 Support [ 0.161221] CPU features: detected: RAS Extension Support [ 0.161233] CPU features: detected: CRC32 instructions [ 0.161245] CPU features: detected: 32-bit EL1 Support [ 0.230071] CPU: All CPU(s) started at EL2 [ 0.236192] devtmpfs: initialized [ 0.309158] Registered cp15_barrier emulation handler [ 0.309307] Registered setend emulation handler [ 0.309368] KASLR enabled [ 0.309661] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.309698] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.312009] pinctrl core: initialized pinctrl subsystem [ 0.313278] SMBIOS 3.0.0 present. [ 0.313342] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.314180] NET: Registered protocol family 16 [ 0.316878] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.317600] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.318691] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.318773] audit: initializing netlink subsys (disabled) [ 0.319044] audit: type=2000 audit(0.316:1): state=initialized audit_enabled=0 res=1 [ 0.319586] thermal_sys: Registered thermal governor 'step_wise' [ 0.319610] thermal_sys: Registered thermal governor 'power_allocator' [ 0.319639] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.323019] cpuidle: using governor menu [ 0.323763] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.324228] ASID allocator initialised with 32768 entries [ 0.324495] Serial: AMBA PL011 UART driver [ 0.328026] Tegra reboot handler registered. [ 0.391386] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.391502] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.391684] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.391722] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.391861] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.391900] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.392063] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.392100] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.392215] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.392251] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.394639] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.394672] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.394695] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.394732] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.394756] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.394813] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.394837] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.394860] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.394885] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.394906] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.394927] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.394948] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.394969] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.394991] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.395011] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.395032] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.395053] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.395134] mc-err: mcerr ops are set to t19x [ 0.406400] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.406426] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.406437] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.406448] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.413210] ACPI: Interpreter disabled. [ 0.414408] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.415843] iommu: Default domain type: Translated [ 0.415909] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.416267] SCSI subsystem initialized [ 0.416413] usbcore: registered new interface driver usbfs [ 0.416453] usbcore: registered new interface driver hub [ 0.416484] usbcore: registered new device driver usb [ 0.416914] mc: Linux media interface: v0.10 [ 0.416939] videodev: Linux video capture interface: v2.00 [ 0.417241] pps_core: LinuxPPS API ver. 1 registered [ 0.417251] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.417272] PTP clock support registered [ 0.417497] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.417859] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.417965] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.418656] Registered efivars operations [ 0.423716] FPGA manager framework [ 0.423840] Advanced Linux Sound Architecture Driver Initialized. [ 0.424514] Bluetooth: Core ver 2.22 [ 0.424552] NET: Registered protocol family 31 [ 0.424564] Bluetooth: HCI device and connection manager initialized [ 0.424579] Bluetooth: HCI socket layer initialized [ 0.424591] Bluetooth: L2CAP socket layer initialized [ 0.424625] Bluetooth: SCO socket layer initialized [ 0.426445] camchar: rtcpu character device driver loaded [ 0.427372] clocksource: Switched to clocksource arch_sys_counter [ 0.719055] VFS: Disk quotas dquot_6.6.0 [ 0.719125] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.719493] pnp: PnP ACPI: disabled [ 0.730477] la/ptsa driver initialized. [ 0.730608] NET: Registered protocol family 2 [ 0.730785] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.737036] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.737145] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.737411] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.737846] TCP: Hash tables configured (established 65536 bind 65536) [ 0.737951] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.738039] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.738251] NET: Registered protocol family 1 [ 0.739105] RPC: Registered named UNIX socket transport module. [ 0.739130] RPC: Registered udp transport module. [ 0.739144] RPC: Registered tcp transport module. [ 0.739156] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.739178] PCI: CLS 0 bytes, default 64 [ 0.739515] Trying to unpack rootfs image as initramfs... [ 1.000433] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.003669] Freeing initrd memory: 8196K [ 1.008404] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.008438] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.008470] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.008886] kvm [1]: IPA Size Limit: 40 bits [ 1.009468] kvm [1]: vgic interrupt IRQ9 [ 1.010008] kvm [1]: VHE mode initialized successfully [ 1.011501] Initialise system trusted keyrings [ 1.011827] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.017163] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.017952] NFS: Registering the id_resolver key type [ 1.017985] Key type id_resolver registered [ 1.017999] Key type id_legacy registered [ 1.018077] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.018102] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.018140] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.027666] NET: Registered protocol family 38 [ 1.027689] Key type asymmetric registered [ 1.027703] Asymmetric key parser 'x509' registered [ 1.027753] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.028036] io scheduler mq-deadline registered [ 1.028054] io scheduler kyber registered [ 1.034000] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.036948] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.037028] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.037129] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.037201] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.037303] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.042713] scrncapt: init (heads:4 wins:6 planes:4) [ 1.042937] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.043875] EINJ: ACPI disabled. [ 1.047483] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.047599] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.047614] tegra-pmc: ### PMC reset level: L1 [ 1.047628] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.047676] tegra-pmc: PMC Prod config success [ 1.052363] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.057405] random: fast init done [ 1.058093] printk: console [ttyTCU0] enabled [ 2.609452] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.614073] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.618701] arm-smmu 10000000.iommu: stage 1 translation [ 2.624363] arm-smmu 10000000.iommu: stage 2 translation [ 2.629600] arm-smmu 10000000.iommu: nested translation [ 2.635179] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.642378] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.652818] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.655198] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.662037] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.669802] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.674844] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.679542] arm-smmu 12000000.iommu: stage 1 translation [ 2.685309] arm-smmu 12000000.iommu: stage 2 translation [ 2.690502] arm-smmu 12000000.iommu: nested translation [ 2.696166] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.703343] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.713386] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.716205] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.723024] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.730210] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.740510] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.743496] tegra_profiler: auth: init [ 2.747959] THERMAL EST: found 3 subdevs [ 2.751093] THERMAL EST num_resources: 0 [ 2.754730] [THERMAL EST subdev 0] [ 2.758292] [THERMAL EST subdev 1] [ 2.761466] [THERMAL EST subdev 2] [ 2.764943] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.771496] THERMAL EST: thz register success. [ 2.775665] THERMAL EST: end of probe, return err: 0 [ 2.780809] nvsciipc: loaded module [ 2.788275] tun: Universal TUN/TAP device driver, 1.6 [ 2.790565] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.796454] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.802285] e1000e: Intel(R) PRO/1000 Network Driver [ 2.806946] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.813314] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.818674] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.824842] PPP generic driver version 2.4.2 [ 2.828802] PPP BSD Compression module registered [ 2.833552] PPP Deflate Compression module registered [ 2.838796] PPP MPPE Compression module registered [ 2.843559] usbcore: registered new interface driver r8152 [ 2.849316] usbcore: registered new interface driver asix [ 2.854402] usbcore: registered new interface driver ax88179_178a [ 2.860522] usbcore: registered new interface driver cdc_ether [ 2.866731] usbcore: registered new interface driver net1080 [ 2.872363] usbcore: registered new interface driver cdc_subset [ 2.878110] usbcore: registered new interface driver zaurus [ 2.883810] usbcore: registered new interface driver cdc_ncm [ 2.889478] usbcore: registered new interface driver aqc111 [ 2.895160] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.901456] ohci-pci: OHCI PCI platform driver [ 2.905496] ohci-platform: OHCI generic platform driver [ 2.911551] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.917852] usbcore: registered new interface driver uas [ 2.921803] usbcore: registered new interface driver usb-storage [ 2.928185] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.933992] mousedev: PS/2 mouse device common for all mice [ 2.939204] usbcore: registered new interface driver xpad [ 2.946996] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.949965] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.957732] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.964333] i2c /dev entries driver [ 2.967349] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.973071] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.978686] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.984111] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.989443] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.994768] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.000423] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.013404] device-mapper: uevent: version 1.0.3 [ 3.013838] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.020751] cpuidle: Initializing cpuidle driver [ 3.024775] sdhci: Secure Digital Host Controller Interface driver [ 3.029553] sdhci: Copyright(c) Pierre Ossman [ 3.033419] Synopsys Designware Multimedia Card Interface Driver [ 3.039838] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.045533] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.051508] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.059012] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.079806] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.089801] vdd-1v0: supplied by regulator-dummy [ 3.095291] vdd-1v8-hs: supplied by regulator-dummy [ 3.100172] vdd-1v8-ls: supplied by regulator-dummy [ 3.104919] vdd-1v8-ao: supplied by regulator-dummy [ 3.108880] vddio-ddr-1v1: supplied by regulator-dummy [ 3.113298] vdd-rtc: supplied by regulator-dummy [ 3.115002] spmic-ldo1: supplied by regulator-dummy [ 3.116228] vdd-ao-3v3: supplied by regulator-dummy [ 3.122341] vddio-emmc-3v3: supplied by regulator-dummy [ 3.128735] spmic-ldo4: supplied by regulator-dummy [ 3.129969] vdd-usb-3v3: supplied by regulator-dummy [ 3.136136] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.142324] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.147931] spmic-ldo8: supplied by vdd-1v8-ls [ 3.149389] gpio-510 (gpio_default): hogged as output/high [ 3.150766] gpio-511 (gpio_default): hogged as output/high [ 3.153671] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.291459] max77686-rtc max77620-rtc: registered as rtc0 [ 3.292561] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.292896] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.124868] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.125980] hid: raw HID events driver (C) Jiri Kosina [ 4.126592] usbcore: registered new interface driver usbhid [ 4.126731] usbhid: USB HID core driver [ 4.128416] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.129462] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.190285] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.265934] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.459 ms) ÿá[ 4.214717] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.215263] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.216398] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.217050] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.218547] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.219138] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.219890] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.221058] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.221389] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.223161] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.230941] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.237742] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.242274] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.249392] denver_knobs_init:MTS_VERSION:55637613 [ 4.260593] t19x_cache tegra-cache: probed [ 4.263117] optee: probing for conduit method. [ 4.264097] optee: revision 3.16 (65cc2218) [ 4.265115] optee: dynamic shared memory is enabled [ 4.269615] optee: initialized driver [ 4.276289] nvpmodel: initialized successfully [ 4.277292] tegra_hv: get_hvd: not initialized yet [ 4.282293] user_ivc_mempool: hypervisor not present [ 4.288474] usbcore: registered new interface driver snd-usb-audio [ 4.294761] u32 classifier [ 4.295877] input device check on [ 4.299388] Actions configured [ 4.303322] Initializing XFRM netlink socket [ 4.307794] NET: Registered protocol family 10 [ 4.313888] Segment Routing with IPv6 [ 4.315574] NET: Registered protocol family 17 [ 4.319798] NET: Registered protocol family 15 [ 4.323943] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.337497] Bluetooth: RFCOMM socket layer initialized [ 4.342355] Bluetooth: RFCOMM ver 1.11 [ 4.346119] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.352300] Bluetooth: HIDP socket layer initialized [ 4.357863] 9pnet: Installing 9P2000 support [ 4.361737] Key type dns_resolver registered [ 4.366784] registered taskstats version 1 [ 4.369889] Loading compiled-in X.509 certificates [ 4.381961] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.385866] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.395735] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.398076] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.406690] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.414812] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.531436] tegra194-pcie 14160000.pcie: Link up [ 4.534080] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.534288] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.534437] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.534667] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.534957] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.535324] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.535800] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.545606] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.546081] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.546498] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.548149] pci 0004:01:00.0: supports D1 D2 [ 4.548298] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.556381] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.556733] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.557023] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.557499] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.557770] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.560052] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.566009] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.573434] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.582300] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.592149] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.596921] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.602524] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.609225] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.617563] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.619934] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.628589] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.637167] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.743528] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.744018] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.744219] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.744362] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.744665] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.744862] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.745206] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.745631] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.761167] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.761450] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.762996] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.764255] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.765493] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.766781] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.768106] pci 0005:00:00.0: Removing from iommu group 7 [ 5.768507] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.804508] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.829542] host1x 13e10000.host1x: initialized [ 5.831117] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.832206] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.833848] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.834517] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.836124] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.836815] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.838177] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.838967] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.840168] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.843720] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.853716] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.860574] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.870345] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.877687] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.887613] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.894688] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.904647] falcon 15340000.vic: Adding to iommu group 17 [ 5.919001] falcon 15340000.vic: initialized [ 5.920100] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.925265] falcon 15380000.nvjpg: initialized [ 5.925960] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.936988] falcon 154c0000.nvenc: initialized [ 5.937635] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.948198] falcon 15a80000.nvenc1: initialized [ 5.948854] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.961193] nvdec 15480000.nvdec: initialized [ 5.961780] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.972030] nvdec 15140000.nvdec1: initialized [ 5.972627] tsec 15500000.tsec: Adding to iommu group 18 [ 5.978547] tsec 15500000.tsec: initialized [ 5.979017] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.984982] tsec 15100000.tsecb: initialized [ 5.989335] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.018077] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.030301] gpio-374 (wifi-enable): hogged as output/high [ 6.030594] gpio-431 (camera-control-output-low): hogged as output/low [ 6.030938] gpio-432 (camera-control-output-low): hogged as output/low [ 6.032753] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.034389] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.034914] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.036647] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.041475] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.046776] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.052416] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.061123] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.068268] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.079686] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.084634] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.090528] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.099672] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.108923] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.115944] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.123466] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.129957] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.139333] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.145573] pva 16000000.pva0: Adding to iommu group 22 [ 6.172136] pva 16000000.pva0: initialized [ 6.176728] pva 16800000.pva1: Adding to iommu group 23 [ 6.188235] pva 16800000.pva1: initialized [ 6.192621] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.206296] nvdla 15880000.nvdla0: initialized [ 6.207641] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.216408] nvdla 158c0000.nvdla1: initialized [ 6.220385] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.220722] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.220800] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.221161] tegradccommon 15200000.display-hub: dma mapping done [ 6.221262] tegradc 15200000.display: Adding to iommu group 26 [ 6.221357] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.223283] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.229296] tegradc 15210000.display: Adding to iommu group 26 [ 6.229522] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.229882] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.230261] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.230270] tegra_cec 3960000.tegra_cec: probed [ 6.231101] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.233294] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.233600] kfuse 3830000.kfuse: initialized [ 6.234140] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.234147] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.234628] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.235543] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.242480] generic_infoframe_type: 0x87 [ 6.249224] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.253517] tegradc 15200000.display: DT parsed successfully [ 6.259030] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.263951] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.271607] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.279233] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.294038] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.302648] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.302656] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.303797] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.380200] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.385805] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.387850] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.396068] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.396145] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.410810] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.413167] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.420715] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.426622] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.438409] tegradc 15210000.display: disp0 connected to head1->sor [ 6.444083] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.449650] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.455481] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.463869] tegradc 15210000.display: DT parsed successfully [ 6.470983] usb usb1: Product: xHCI Host Controller [ 6.471009] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.478030] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.483969] usb usb1: SerialNumber: 3610000.xhci [ 6.508871] hub 1-0:1.0: USB hub found [ 6.511527] hub 1-0:1.0: 4 ports detected [ 6.516059] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.520834] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.528665] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.536269] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.544348] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.551246] usb usb2: Product: xHCI Host Controller [ 6.556423] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.562507] usb usb2: SerialNumber: 3610000.xhci [ 6.568229] hub 2-0:1.0: USB hub found [ 6.570852] hub 2-0:1.0: 4 ports detected [ 6.614835] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.622603] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.625298] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.625563] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.639433] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.640573] tegra194-cpufreq ccplex: probed with BWMGR [ 6.641925] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.642452] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.642940] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.644228] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.651137] tegra194-vi5 15c10000.vi: initialized [ 6.652670] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.652768] random: crng init done [ 6.652881] generic_infoframe_type: 0x87 [ 6.654735] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.658375] tegradc 15200000.display: DT parsed successfully [ 6.660760] mmc0: CQHCI version 5.10 [ 6.665095] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.670672] tegradc 15200000.display: Display dc.000000005c637f4c registered with id=0 [ 6.674145] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.682590] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.689562] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.690176] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.696454] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.696458] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.696802] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.704943] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.704952] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.712564] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.727418] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.728100] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.735572] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.735587] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.742920] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.749610] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.754895] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.757128] tegradc 15200000.display: probed [ 6.775269] mmc0: Command Queue Engine enabled [ 6.778057] nvethernet 2490000.ethernet: Macsec not supported [ 6.787455] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.791844] mmc0: periodic cache flush enabled [ 6.791864] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.792598] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.792608] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.799894] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.808745] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.826366] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.829506] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.887827] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.888010] Console: switching to colour frame buffer device 240x67 [ 6.889102] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.894217] tegradc 15200000.display: fb registered [ 6.894278] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.902120] tegra-se-nvhost 15810000.se: initialized [ 6.907905] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.916914] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.922482] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.928518] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.947396] tegra-se-nvhost 15820000.se: initialized [ 6.953455] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.958624] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.964994] tegra-se-nvhost 15830000.se: initialized [ 6.970118] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.975755] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.982339] tegra-se-nvhost 15840000.se: initialized [ 6.988469] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.994186] tegra_actmon d230000.actmon: in actmon_register()... [ 6.999199] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.004540] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.013188] hvc_sysfs: hypervisor is not present [ 7.013272] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.016783] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.033942] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.041032] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.043502] ALSA device list: [ 7.044476] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.044485] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.045378] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.045382] Extcon AUX1(HDMI) enable [ 7.045505] tegradc 15210000.display: disp1 connected to head1->sor [ 7.045671] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.045723] tegradc 15210000.display: DT parsed successfully [ 7.045766] tegradc 15210000.display: Display dc.00000000aacf3a0b registered with id=1 [ 7.045856] usb 1-2: Manufacturer: Generic [ 7.045883] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.045891] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.048565] No soundcards found. [ 7.052328] tegradc 15210000.display: probed [ 7.058636] hub 1-2:1.0: USB hub found [ 7.124271] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.127603] hub 1-2:1.0: 4 ports detected [ 7.142210] tegradc 15210000.display: fb registered [ 7.145609] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.154612] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.154635] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.163330] Freeing unused kernel memory: 3968K [ 7.172407] tegradc 15210000.display: blank - powerdown [ 7.177307] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.179505] Run /init as init process [ 7.185805] Extcon DP: HPD disabled [ 7.192995] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.199431] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.205460] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.214244] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.220343] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.227944] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.227949] usb 2-3: Manufacturer: Generic [ 7.228135] tegradc 15200000.display: blank - powerdown [ 7.231417] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.239127] hub 2-3:1.0: USB hub found [ 7.241027] hub 2-3:1.0: 4 ports detected [ 7.248964] Root device found: mmcblk0p1 [ 7.251013] Found dev node: /dev/mmcblk0p1 [ 7.263687] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.263691] Extcon AUX1(HDMI) disable [ 7.286292] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.287272] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.288208] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.293508] Rootfs mounted over mmcblk0p1 [ 7.295961] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.295966] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.300001] tegradc 15200000.display: unblank [ 7.301092] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.301286] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.307553] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.309463] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.313441] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.313445] Extcon AUX1(HDMI) enable [ 7.323402] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.326241] tegradc 15200000.display: sync windows ret = 247 [ 7.327192] Switching from initrd to actual rootfs [ 7.381099] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.388528] Extcon HDMI: HPD enabled [ 7.392027] tegradc 15200000.display: hdmi: plugged [ 7.476661] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.477948] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.479179] usb 1-3: Product: Bluetooth Radio [ 7.480361] usb 1-3: Manufacturer: Realtek [ 7.481526] usb 1-3: SerialNumber: 00e04c000001 [ 7.534281] systemd[1]: System time before build time, advancing clock. [ 7.605179] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.609978] systemd[1]: Detected architecture arm64. [ 7.650199] systemd[1]: Set hostname to . [ 7.818918] systemd-sysv-generator[250]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.159741] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.161382] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.166766] systemd[1]: Created slice system-modprobe.slice. [ 8.171396] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.175315] systemd[1]: Created slice User and Session Slice. [ 8.178539] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.182514] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.185694] systemd[1]: Reached target User and Group Name Lookups. [ 8.188685] systemd[1]: Reached target Slices. [ 8.191714] systemd[1]: Reached target Swap. [ 8.195549] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.198968] systemd[1]: Listening on Syslog Socket. [ 8.202476] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.205718] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.209752] systemd[1]: Listening on Journal Audit Socket. [ 8.213164] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.216809] systemd[1]: Listening on Journal Socket. [ 8.220391] systemd[1]: Listening on udev Control Socket. [ 8.223731] systemd[1]: Listening on udev Kernel Socket. [ 8.232119] systemd[1]: Mounting Huge Pages File System... [ 8.240601] systemd[1]: Mounting POSIX Message Queue File System... [ 8.250345] systemd[1]: Mounting RPC Pipe File System... [ 8.260082] systemd[1]: Mounting Kernel Debug File System... [ 8.268516] systemd[1]: Mounting Kernel Trace File System... [ 8.278163] systemd[1]: Starting Journal Service... [ 8.286642] systemd[1]: Starting Set the console keyboard layout... [ 8.294702] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.298101] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.304555] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.312269] systemd[1]: Started Nameserver information manager. [ 8.317039] systemd[1]: Reached target Network (Pre). [ 8.324617] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.326464] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.334751] systemd[1]: Starting Load Kernel Modules... [ 8.342436] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.350250] systemd[1]: Starting udev Coldplug all Devices... [ 8.361040] systemd[1]: Mounted Huge Pages File System. [ 8.364688] systemd[1]: Mounted POSIX Message Queue File System. [ 8.368302] systemd[1]: Mounted RPC Pipe File System. [ 8.371894] systemd[1]: Mounted Kernel Debug File System. [ 8.373449] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.379182] systemd[1]: Mounted Kernel Trace File System. [ 8.380947] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.381860] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.381866] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.381874] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.381878] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.382127] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.382337] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.382496] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.382503] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.406012] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.413483] systemd[1]: nvfb-udev.service: Succeeded. [ 8.418057] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.430165] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.434959] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.437564] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.451744] systemd[1]: Starting Load/Save Random Seed... [ 8.461310] systemd[1]: Starting Create System Users... [ 8.494629] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.494629] [ 8.507973] systemd[1]: Finished Load/Save Random Seed. [ 8.520764] systemd[1]: Finished Create System Users. [ 8.527526] systemd[1]: Finished Load Kernel Modules. [ 8.531689] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.538183] systemd[1]: Mounting Kernel Configuration File System... [ 8.545733] systemd[1]: Started OP-TEE Client Supplicant. [ 8.553768] systemd[1]: Starting Apply Kernel Variables... [ 8.562115] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.572737] systemd[1]: Finished Set the console keyboard layout. [ 8.579713] systemd[1]: Mounted Kernel Configuration File System. [ 10.057207] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.062404] imx219 9-0010: board setup failed [ 10.062493] imx219: probe of 9-0010 failed with error -121 [ 10.073546] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.079121] imx219 10-0010: board setup failed [ 10.079208] imx219: probe of 10-0010 failed with error -121 [ 10.151647] hot-surface-alert cooling state: 0 -> 1 [ 10.892658] using random self ethernet address [ 10.893889] using random host ethernet address [ 11.572530] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.574199] Creating 1 MTD partitions on "spi6.0": [ 11.575790] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.383419] using random self ethernet address [ 12.384985] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.806744] nvidia: loading out-of-tree module taints kernel. [ 58.861759] watchdog: watchdog0: watchdog did not stop! [ 59.364544] Trying to unregister non-registered hwtime source [ 62.426220] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.427951] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeoõÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.481] I> register 'maxim' power off handle [0003.483] I> virtual i2c enabled [0003.483] I> registered 'maxim,max20024' pmic [0003.484] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.600] W> set volts not configured for 'vdd-1v0' [0003.604] W> set volts not configured for 'vdd-1v8-hs' [0003.605] I> retrieved tmds range from prod_list_hdmi_soc [0003.609] E> invalid display type [0003.610] E> cannot find any other nvdisp nodes [0003.627] I> edid read success [0003.640] I> edid read success [0003.640] I> width = 640, height = 480, frequency = 25174825 [0003.640] I> width = 1920, height = 1080, frequency = 148500000 [0003.641] I> width = 1280, height = 768, frequency = 79500000 [0003.641] I> width = 1360, height = 768, frequency = 85500000 [0003.641] I> width = 720, height = 480, frequency = 26973026 [0003.645] I> width = 720, height = 576, frequency = 26973026 [0003.651] I> width = 1280, height = 720, frequency = 74175824 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1920, height = 1080, frequency = 148351648 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 720, height = 480, frequency = 26973026 [0003.679] I> width = 720, height = 576, frequency = 26973026 [0003.685] I> width = 3840, height = 2160, frequency = 296703296 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 4096, height = 2160, frequency = 296703296 [0003.714] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.725] I> hdmi_enable, starting HDMI initialisation [0003.730] I> hdmi_enable, HDMI initialisation complete [0003.739] initializing target [0003.740] calling apps_init() [0003.740] starting app kernel_boot_app [0003.741] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000721] Console: colour dummy device 80x25 [ 0.002180] printk: console [tty0] enabled [ 0.002241] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002275] pid_max: default: 32768 minimum: 301 [ 0.002502] LSM: Security Framework initializing [ 0.002560] Yama: becoming mindful. [ 0.002601] SELinux: Initializing. [ 0.002758] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002794] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005894] rcu: Hierarchical SRCU implementation. [ 0.006203] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007151] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007227] DTB Build time: Aug 10 2022 20:31:49 [ 0.009932] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010178] Remapping and enabling EFI services. [ 0.012723] smp: Bringing up secondary CPUs ... [ 0.044825] Detected PIPT I-cache on CPU1 [ 0.044944] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.077456] Detected PIPT I-cache on CPU2 [ 0.077609] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.107481] Detected PIPT I-cache on CPU3 [ 0.107626] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.137315] Detected PIPT I-cache on CPU4 [ 0.137499] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.167146] Detected PIPT I-cache on CPU5 [ 0.167303] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.167661] smp: Brought up 1 node, 6 CPUs [ 0.167985] SMP: Total of 6 processors activated. [ 0.168040] CPU features: detected: Privileged Access Never [ 0.168072] CPU features: detected: LSE atomic instructions [ 0.168093] CPU features: detected: User Access Override [ 0.168114] CPU features: detected: 32-bit EL0 Support [ 0.168134] CPU features: detected: RAS Extension Support [ 0.168154] CPU features: detected: CRC32 instructions [ 0.168174] CPU features: detected: 32-bit EL1 Support [ 0.233549] CPU: All CPU(s) started at EL2 [ 0.238505] devtmpfs: initialized [ 0.288499] Registered cp15_barrier emulation handler [ 0.288642] Registered setend emulation handler [ 0.288670] KASLR enabled [ 0.288942] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288984] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290334] pinctrl core: initialized pinctrl subsystem [ 0.291304] SMBIOS 3.0.0 present. [ 0.291337] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291973] NET: Registered protocol family 16 [ 0.293900] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.294425] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295147] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295206] audit: initializing netlink subsys (disabled) [ 0.295536] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296030] thermal_sys: Registered thermal governor 'step_wise' [ 0.296036] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296051] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298348] cpuidle: using governor menu [ 0.298632] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299042] ASID allocator initialised with 32768 entries [ 0.299288] Serial: AMBA PL011 UART driver [ 0.303245] Tegra reboot handler registered. [ 0.370013] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.370131] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.370308] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.370370] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.370515] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.370572] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.370689] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.370737] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.370857] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.370896] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.373148] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.373182] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.373210] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.373236] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.373265] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.373292] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.373330] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.373360] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.373408] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.373433] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.373470] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.373494] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.373517] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.373556] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.373580] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.373603] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.373626] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.373722] mc-err: mcerr ops are set to t19x [ 0.385243] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.385266] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.385279] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.385290] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.392930] ACPI: Interpreter disabled. [ 0.394148] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.395366] iommu: Default domain type: Translated [ 0.395424] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.395778] SCSI subsystem initialized [ 0.395936] usbcore: registered new interface driver usbfs [ 0.395975] usbcore: registered new interface driver hub [ 0.396006] usbcore: registered new device driver usb [ 0.396357] mc: Linux media interface: v0.10 [ 0.396387] videodev: Linux video capture interface: v2.00 [ 0.396647] pps_core: LinuxPPS API ver. 1 registered [ 0.396658] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.396677] PTP clock support registered [ 0.396852] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.397153] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.397231] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.397744] Registered efivars operations [ 0.403027] FPGA manager framework [ 0.403126] Advanced Linux Sound Architecture Driver Initialized. [ 0.403710] Bluetooth: Core ver 2.22 [ 0.403748] NET: Registered protocol family 31 [ 0.403760] Bluetooth: HCI device and connection manager initialized [ 0.403775] Bluetooth: HCI socket layer initialized [ 0.403791] Bluetooth: L2CAP socket layer initialized [ 0.403811] Bluetooth: SCO socket layer initialized [ 0.405894] camchar: rtcpu character device driver loaded [ 0.407208] clocksource: Switched to clocksource arch_sys_counter [ 0.820373] VFS: Disk quotas dquot_6.6.0 [ 0.820468] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.820979] pnp: PnP ACPI: disabled [ 0.834236] la/ptsa driver initialized. [ 0.834405] NET: Registered protocol family 2 [ 0.834603] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.842256] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.842457] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.842861] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.843549] TCP: Hash tables configured (established 65536 bind 65536) [ 0.843736] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.843903] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.844193] NET: Registered protocol family 1 [ 0.844925] RPC: Registered named UNIX socket transport module. [ 0.844943] RPC: Registered udp transport module. [ 0.844957] RPC: Registered tcp transport module. [ 0.844970] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.844990] PCI: CLS 0 bytes, default 64 [ 0.845316] Trying to unpack rootfs image as initramfs... [ 1.106487] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.109773] Freeing initrd memory: 8196K [ 1.113984] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.114018] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.114057] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.114446] kvm [1]: IPA Size Limit: 40 bits [ 1.114925] kvm [1]: vgic interrupt IRQ9 [ 1.115463] kvm [1]: VHE mode initialized successfully [ 1.116876] Initialise system trusted keyrings [ 1.117157] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.123025] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.123957] NFS: Registering the id_resolver key type [ 1.124030] Key type id_resolver registered [ 1.124045] Key type id_legacy registered [ 1.124161] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.124186] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.124223] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.133699] NET: Registered protocol family 38 [ 1.133722] Key type asymmetric registered [ 1.133737] Asymmetric key parser 'x509' registered [ 1.133780] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.134045] io scheduler mq-deadline registered [ 1.134062] io scheduler kyber registered [ 1.139905] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.142859] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.142950] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.143022] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.143105] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.143183] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.148828] scrncapt: init (heads:4 wins:6 planes:4) [ 1.148922] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.149929] EINJ: ACPI disabled. [ 1.153344] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.153370] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.153384] tegra-pmc: ### PMC reset level: L1 [ 1.153397] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.153445] tegra-pmc: PMC Prod config success [ 1.158587] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.170542] random: fast init done [ 1.175817] printk: console [ttyTCU0] enabled [ 2.716051] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.720718] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.725365] arm-smmu 10000000.iommu: stage 1 translation [ 2.730544] arm-smmu 10000000.iommu: stage 2 translation [ 2.736034] arm-smmu 10000000.iommu: nested translation [ 2.741366] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.748543] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.758711] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.761670] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.768485] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.776210] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.781266] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.785992] arm-smmu 12000000.iommu: stage 1 translation [ 2.791504] arm-smmu 12000000.iommu: stage 2 translation [ 2.796923] arm-smmu 12000000.iommu: nested translation [ 2.802609] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.809787] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.819746] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.822631] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.829471] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.836634] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.846601] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.849884] tegra_profiler: auth: init [ 2.853916] THERMAL EST: found 3 subdevs [ 2.857567] THERMAL EST num_resources: 0 [ 2.861177] [THERMAL EST subdev 0] [ 2.864732] [THERMAL EST subdev 1] [ 2.867910] [THERMAL EST subdev 2] [ 2.871389] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.877871] THERMAL EST: thz register success. [ 2.882087] THERMAL EST: end of probe, return err: 0 [ 2.887140] nvsciipc: loaded module [ 2.894330] tun: Universal TUN/TAP device driver, 1.6 [ 2.896811] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.903161] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.908457] e1000e: Intel(R) PRO/1000 Network Driver [ 2.913386] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.919470] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.925015] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.931012] PPP generic driver version 2.4.2 [ 2.935486] PPP BSD Compression module registered [ 2.939749] PPP Deflate Compression module registered [ 2.944987] PPP MPPE Compression module registered [ 2.950283] usbcore: registered new interface driver r8152 [ 2.955508] usbcore: registered new interface driver asix [ 2.961108] usbcore: registered new interface driver ax88179_178a [ 2.967240] usbcore: registered new interface driver cdc_ether [ 2.972913] usbcore: registered new interface driver net1080 [ 2.978514] usbcore: registered new interface driver cdc_subset [ 2.984817] usbcore: registered new interface driver zaurus [ 2.990511] usbcore: registered new interface driver cdc_ncm [ 2.996191] usbcore: registered new interface driver aqc111 [ 3.001872] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.007643] ohci-pci: OHCI PCI platform driver [ 3.012199] ohci-platform: OHCI generic platform driver [ 3.018067] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.024082] usbcore: registered new interface driver uas [ 3.028240] usbcore: registered new interface driver usb-storage [ 3.034651] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.040352] mousedev: PS/2 mouse device common for all mice [ 3.045392] usbcore: registered new interface driver xpad [ 3.053713] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.056402] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.064197] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.070703] i2c /dev entries driver [ 3.073804] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.079899] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.085210] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.090658] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.095640] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.101144] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.106610] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.120389] device-mapper: uevent: version 1.0.3 [ 3.120872] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.126968] cpuidle: Initializing cpuidle driver [ 3.131057] sdhci: Secure Digital Host Controller Interface driver [ 3.135999] sdhci: Copyright(c) Pierre Ossman [ 3.139845] Synopsys Designware Multimedia Card Interface Driver [ 3.146299] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.152266] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.158218] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.165512] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.186609] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.196142] vdd-1v0: supplied by regulator-dummy [ 3.201720] vdd-1v8-hs: supplied by regulator-dummy [ 3.206556] vdd-1v8-ls: supplied by regulator-dummy [ 3.211381] vdd-1v8-ao: supplied by regulator-dummy [ 3.215314] vddio-ddr-1v1: supplied by regulator-dummy [ 3.219784] vdd-rtc: supplied by regulator-dummy [ 3.221550] spmic-ldo1: supplied by regulator-dummy [ 3.222754] vdd-ao-3v3: supplied by regulator-dummy [ 3.228980] vddio-emmc-3v3: supplied by regulator-dummy [ 3.235238] spmic-ldo4: supplied by regulator-dummy [ 3.236536] vdd-usb-3v3: supplied by regulator-dummy [ 3.242771] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.248886] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.254519] spmic-ldo8: supplied by vdd-1v8-ls [ 3.256030] gpio-510 (gpio_default): hogged as output/high [ 3.257412] gpio-511 (gpio_default): hogged as output/high [ 3.260411] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.398192] max77686-rtc max77620-rtc: registered as rtc0 [ 3.399566] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.399922] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.220212] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.221219] hid: raw HID events driver (C) Jiri Kosina [ 4.222004] usbcore: registered new interface driver usbhid [ 4.222155] usbhid: USB HID core driver [ 4.224055] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.225134] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.313791] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.389040] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 76.058 ms) ÿá[ 4.310054] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.310704] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.311707] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.312272] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.313892] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.314498] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.315025] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.316400] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.316606] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.318263] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.325844] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.332908] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.337711] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.343595] denver_knobs_init:MTS_VERSION:55637613 [ 4.356279] t19x_cache tegra-cache: probed [ 4.358751] optee: probing for conduit method. [ 4.359769] optee: revision 3.16 (65cc2218) [ 4.360836] optee: dynamic shared memory is enabled [ 4.365128] optee: initialized driver [ 4.371940] nvpmodel: initialized successfully [ 4.372901] tegra_hv: get_hvd: not initialized yet [ 4.377595] user_ivc_mempool: hypervisor not present [ 4.383557] usbcore: registered new interface driver snd-usb-audio [ 4.389864] u32 classifier [ 4.391322] input device check on [ 4.394981] Actions configured [ 4.398482] Initializing XFRM netlink socket [ 4.403458] NET: Registered protocol family 10 [ 4.409210] Segment Routing with IPv6 [ 4.410891] NET: Registered protocol family 17 [ 4.414916] NET: Registered protocol family 15 [ 4.419560] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.433265] Bluetooth: RFCOMM socket layer initialized [ 4.437827] Bluetooth: RFCOMM ver 1.11 [ 4.441538] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.447620] Bluetooth: HIDP socket layer initialized [ 4.453506] 9pnet: Installing 9P2000 support [ 4.456798] Key type dns_resolver registered [ 4.462688] registered taskstats version 1 [ 4.465502] Loading compiled-in X.509 certificates [ 4.478900] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.481140] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.491539] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.493362] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.501767] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.510370] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.627318] tegra194-pcie 14160000.pcie: Link up [ 4.630394] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.630847] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.631040] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.631406] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.631873] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.632328] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.633027] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.647340] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.647907] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.648400] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.649984] pci 0004:01:00.0: supports D1 D2 [ 4.650220] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.662015] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.662373] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.662711] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.663119] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.663480] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.663700] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.664001] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.669328] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.678087] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.687970] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.692880] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.698225] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.705197] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.713676] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.716040] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.724255] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.732971] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.848127] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.848705] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.848940] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.849177] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.849787] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.850196] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.850827] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.851496] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.876531] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.876921] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.879035] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.880329] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.881924] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.883898] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.884910] pci 0005:00:00.0: Removing from iommu group 7 [ 5.885230] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.919583] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.945641] host1x 13e10000.host1x: initialized [ 5.947977] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.949072] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.950476] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.951359] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.952583] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.953310] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.954370] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.955341] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.956430] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.957120] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.958320] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.965050] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.975405] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.982023] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.992385] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.999479] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.009681] falcon 15340000.vic: Adding to iommu group 17 [ 6.024407] falcon 15340000.vic: initialized [ 6.025630] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.030900] falcon 15380000.nvjpg: initialized [ 6.031522] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.041362] falcon 154c0000.nvenc: initialized [ 6.041918] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.051920] falcon 15a80000.nvenc1: initialized [ 6.052438] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.065360] nvdec 15480000.nvdec: initialized [ 6.066010] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.075926] nvdec 15140000.nvdec1: initialized [ 6.076487] tsec 15500000.tsec: Adding to iommu group 18 [ 6.082150] tsec 15500000.tsec: initialized [ 6.082602] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.089452] tsec 15100000.tsecb: initialized [ 6.093373] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.121001] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.133318] gpio-374 (wifi-enable): hogged as output/high [ 6.133580] gpio-431 (camera-control-output-low): hogged as output/low [ 6.133930] gpio-432 (camera-control-output-low): hogged as output/low [ 6.135650] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.137594] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.138176] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.140482] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.145700] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.151683] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.157474] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.165735] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.173296] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.184108] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.189696] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.195270] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.204322] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.213279] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.220535] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.228060] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.234323] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.244214] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.250197] pva 16000000.pva0: Adding to iommu group 22 [ 6.277243] pva 16000000.pva0: initialized [ 6.281982] pva 16800000.pva1: Adding to iommu group 23 [ 6.292934] pva 16800000.pva1: initialized [ 6.297424] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.312260] nvdla 15880000.nvdla0: initialized [ 6.313600] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.323103] nvdla 158c0000.nvdla1: initialized [ 6.326406] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.326776] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.326900] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.327108] tegradc 15200000.display: Adding to iommu group 26 [ 6.327620] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.328071] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.328087] tegradccommon 15200000.display-hub: dma mapping done [ 6.334575] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.334865] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.334987] tegradc 15210000.display: Adding to iommu group 26 [ 6.340089] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.347131] generic_infoframe_type: 0x87 [ 6.352044] tegra_cec 3960000.tegra_cec: probed [ 6.353065] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.358103] tegradc 15200000.display: DT parsed successfully [ 6.364715] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.366490] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.372619] kfuse 3830000.kfuse: initialized [ 6.381881] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.385265] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.392540] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.397245] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.398073] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.405590] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.406590] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.412773] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.420280] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.427924] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.433801] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.441283] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.450808] random: crng init done [ 6.490902] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.491909] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.498706] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.511047] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.513341] tegradc 15210000.display: disp0 connected to head1->sor [ 6.525738] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.531296] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.532843] tegradc 15210000.display: DT parsed successfully [ 6.542571] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.548289] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.553411] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.569833] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.578132] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.585211] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.592262] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.599584] usb usb1: Product: xHCI Host Controller [ 6.604852] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.610952] usb usb1: SerialNumber: 3610000.xhci [ 6.616589] hub 1-0:1.0: USB hub found [ 6.619429] hub 1-0:1.0: 4 ports detected [ 6.624026] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.629080] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.636450] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.644276] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.652023] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.659263] usb usb2: Product: xHCI Host Controller [ 6.664498] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.670707] usb usb2: SerialNumber: 3610000.xhci [ 6.675892] hub 2-0:1.0: USB hub found [ 6.678886] hub 2-0:1.0: 4 ports detected [ 6.722193] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.728408] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.729961] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.730172] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.743509] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.744605] tegra194-cpufreq ccplex: probed with BWMGR [ 6.745890] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.746372] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.746840] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.748129] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.755093] tegra194-vi5 15c10000.vi: initialized [ 6.756981] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.758006] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.759367] generic_infoframe_type: 0x87 [ 6.764541] mmc0: CQHCI version 5.10 [ 6.765769] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.769263] tegradc 15200000.display: DT parsed successfully [ 6.772971] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.781076] tegradc 15200000.display: Display dc.000000006cd52800 registered with id=0 [ 6.786864] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.793413] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.793820] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.793825] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.793828] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.794146] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.794152] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.794300] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.795477] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.795482] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.797451] tegradc 15200000.display: probed [ 6.801361] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.801367] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.807350] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.883291] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.889300] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.889314] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.906592] mmc0: Command Queue Engine enabled [ 6.910556] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.915713] mmc0: periodic cache flush enabled [ 6.915730] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.916351] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.927616] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.934977] nvethernet 2490000.ethernet: Macsec not supported [ 6.950953] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.958902] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.979654] Console: switching to colour frame buffer device 240x67 [ 6.980518] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.985492] tegradc 15200000.display: fb registered [ 6.991429] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.003291] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.003345] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.010205] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.016969] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.021993] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.029748] tegra-se-nvhost 15810000.se: initialized [ 7.040229] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.045944] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.052048] tegra-se-nvhost 15820000.se: initialized [ 7.058256] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.063027] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.066725] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.077080] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.084327] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.089315] usb 1-2: Manufacturer: Generic [ 7.089466] tegra-se-nvhost 15830000.se: initialized [ 7.095388] hub 1-2:1.0: USB hub found [ 7.099664] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.103209] hub 1-2:1.0: 4 ports detected [ 7.104834] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.108902] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.113224] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.122078] tegra-se-nvhost 15840000.se: initialized [ 7.127631] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.128260] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.136723] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.140115] Extcon AUX1(HDMI) enable [ 7.148997] tegra_actmon d230000.actmon: in actmon_register()... [ 7.154912] tegradc 15210000.display: disp1 connected to head1->sor [ 7.161047] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.164666] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.171088] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.176886] tegradc 15210000.display: DT parsed successfully [ 7.182522] hvc_sysfs: hypervisor is not present [ 7.189188] tegradc 15210000.display: Display dc.00000000b87ea2b3 registered with id=1 [ 7.200111] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.223645] ALSA device list: [ 7.223803] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.226235] No soundcards found. [ 7.232550] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.248626] tegradc 15210000.display: probed [ 7.248965] tegradc 15210000.display: fb registered [ 7.254826] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.259055] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.260061] Freeing unused kernel memory: 3968K [ 7.261802] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.261809] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.261813] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.261818] usb 2-3: Manufacturer: Generic [ 7.266589] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.273131] hub 2-3:1.0: USB hub found [ 7.286951] Run /init as init process [ 7.294470] hub 2-3:1.0: 4 ports detected [ 7.312635] tegradc 15210000.display: blank - powerdown ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.317543] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.317546] Extcon DP: HPD disabled [ 7.317550] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.317558] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.317563] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.317649] tegradc 15200000.display: blank - powerdown [ 7.355267] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.355273] Extcon AUX1(HDMI) disable [ 7.359265] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.359271] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.378565] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.379240] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.379418] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.392689] tegradc 15200000.display: unblank [ 7.393782] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.393974] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.400118] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.402000] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.406002] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.406006] Extcon AUX1(HDMI) enable [ 7.418752] tegradc 15200000.display: sync windows ret = 247 [ 7.458895] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.466041] Extcon HDMI: HPD enabled [ 7.469706] tegradc 15200000.display: hdmi: plugged [ 7.508691] Root device found: mmcblk0p1 [ 7.512296] Found dev node: /dev/mmcblk0p1 [ 7.532467] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.533966] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.535450] usb 1-3: Product: Bluetooth Radio [ 7.536753] usb 1-3: Manufacturer: Realtek [ 7.538025] usb 1-3: SerialNumber: 00e04c000001 [ 7.550078] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.555610] Rootfs mounted over mmcblk0p1 [ 7.586549] Switching from initrd to actual rootfs [ 7.736380] systemd[1]: System time before build time, advancing clock. [ 7.808080] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.813059] systemd[1]: Detected architecture arm64. [ 7.849769] systemd[1]: Set hostname to . [ 8.018424] systemd-sysv-generator[249]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.377390] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.379134] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.385039] systemd[1]: Created slice system-modprobe.slice. [ 8.389913] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.394244] systemd[1]: Created slice User and Session Slice. [ 8.397687] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.401920] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.405303] systemd[1]: Reached target User and Group Name Lookups. [ 8.408496] systemd[1]: Reached target Slices. [ 8.411590] systemd[1]: Reached target Swap. [ 8.415602] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.419291] systemd[1]: Listening on Syslog Socket. [ 8.422760] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.426171] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.430537] systemd[1]: Listening on Journal Audit Socket. [ 8.434219] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.437945] systemd[1]: Listening on Journal Socket. [ 8.441604] systemd[1]: Listening on udev Control Socket. [ 8.445055] systemd[1]: Listening on udev Kernel Socket. [ 8.453610] systemd[1]: Mounting Huge Pages File System... [ 8.463848] systemd[1]: Mounting POSIX Message Queue File System... [ 8.471925] systemd[1]: Mounting RPC Pipe File System... [ 8.480410] systemd[1]: Mounting Kernel Debug File System... [ 8.488708] systemd[1]: Mounting Kernel Trace File System... [ 8.498529] systemd[1]: Starting Journal Service... [ 8.507487] systemd[1]: Starting Set the console keyboard layout... [ 8.515716] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.519131] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.525545] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.533692] systemd[1]: Started Nameserver information manager. [ 8.540077] systemd[1]: Reached target Network (Pre). [ 8.547577] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.549425] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.558499] systemd[1]: Starting Load Kernel Modules... [ 8.565929] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.574928] systemd[1]: Starting udev Coldplug all Devices... [ 8.585250] systemd[1]: Mounted Huge Pages File System. [ 8.589096] systemd[1]: Mounted POSIX Message Queue File System. [ 8.592871] systemd[1]: Mounted RPC Pipe File System. [ 8.596393] systemd[1]: Mounted Kernel Debug File System. [ 8.598369] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.602392] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.604784] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.605543] systemd[1]: Mounted Kernel Trace File System. [ 8.606425] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.609640] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.611070] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.611373] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.611466] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.611643] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.611651] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.624861] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.631926] systemd[1]: nvfb-udev.service: Succeeded. [ 8.637116] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.648255] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.660912] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.662737] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.670445] systemd[1]: Starting Load/Save Random Seed... [ 8.679274] systemd[1]: Starting Create System Users... [ 8.704995] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.704995] [ 8.727383] systemd[1]: Finished Load/Save Random Seed. [ 8.734273] systemd[1]: Finished Load Kernel Modules. [ 8.744256] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.751148] systemd[1]: Mounting Kernel Configuration File System... [ 8.759252] systemd[1]: Started OP-TEE Client Supplicant. [ 8.769216] systemd[1]: Starting Apply Kernel Variables... [ 8.779765] systemd[1]: Finished Set the console keyboard layout. [ 8.786975] systemd[1]: Finished Create System Users. [ 8.791331] systemd[1]: Mounted Kernel Configuration File System. [ 8.801138] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.284052] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.290785] imx219 9-0010: board setup failed [ 10.292459] imx219: probe of 9-0010 failed with error -121 [ 10.315332] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.322557] imx219 10-0010: board setup failed [ 10.324100] imx219: probe of 10-0010 failed with error -121 [ 10.396334] hot-surface-alert cooling state: 0 -> 1 [ 11.488796] using random self ethernet address [ 11.490576] using random host ethernet address [ 11.902466] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.904357] Creating 1 MTD partitions on "spi6.0": [ 11.906076] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.771039] using random self ethernet address [ 12.772965] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.870673] nvidia: loading out-of-tree module taints kernel. [ 60.378270] watchdog: watchdog0: watchdog did not stop! [ 60.868173] Trying to unregister non-registered hwtime source [ 63.925450] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.927029] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERRýÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.077] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.120] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.128] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.905] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.915] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.922] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.323] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized entering main console loop ] bpmp: init complete ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.618] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.646] I> edid read success [0003.647] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.686] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.747] calling apps_init() [0003.748] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000767] Console: colour dummy device 80x25 [ 0.002294] printk: console [tty0] enabled [ 0.002376] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002442] pid_max: default: 32768 minimum: 301 [ 0.002669] LSM: Security Framework initializing [ 0.002733] Yama: becoming mindful. [ 0.002814] SELinux: Initializing. [ 0.002998] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003035] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006509] rcu: Hierarchical SRCU implementation. [ 0.006754] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007747] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007791] DTB Build time: Aug 10 2022 20:31:49 [ 0.010907] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011143] Remapping and enabling EFI services. [ 0.013097] smp: Bringing up secondary CPUs ... [ 0.042159] Detected PIPT I-cache on CPU1 [ 0.042235] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073189] Detected PIPT I-cache on CPU2 [ 0.073345] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102916] Detected PIPT I-cache on CPU3 [ 0.103063] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132724] Detected PIPT I-cache on CPU4 [ 0.132940] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162733] Detected PIPT I-cache on CPU5 [ 0.162888] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163246] smp: Brought up 1 node, 6 CPUs [ 0.163492] SMP: Total of 6 processors activated. [ 0.163546] CPU features: detected: Privileged Access Never [ 0.163584] CPU features: detected: LSE atomic instructions [ 0.163598] CPU features: detected: User Access Override [ 0.163611] CPU features: detected: 32-bit EL0 Support [ 0.163623] CPU features: detected: RAS Extension Support [ 0.163635] CPU features: detected: CRC32 instructions [ 0.163647] CPU features: detected: 32-bit EL1 Support [ 0.229702] CPU: All CPU(s) started at EL2 [ 0.234860] devtmpfs: initialized [ 0.279550] Registered cp15_barrier emulation handler [ 0.279664] Registered setend emulation handler [ 0.279684] KASLR enabled [ 0.279927] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.279952] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.281280] pinctrl core: initialized pinctrl subsystem [ 0.282395] SMBIOS 3.0.0 present. [ 0.282423] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.283030] NET: Registered protocol family 16 [ 0.285098] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.285601] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.286348] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.286403] audit: initializing netlink subsys (disabled) [ 0.286692] audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1 [ 0.287072] thermal_sys: Registered thermal governor 'step_wise' [ 0.287079] thermal_sys: Registered thermal governor 'power_allocator' [ 0.287093] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.290423] cpuidle: using governor menu [ 0.290818] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.291290] ASID allocator initialised with 32768 entries [ 0.291531] Serial: AMBA PL011 UART driver [ 0.294864] Tegra reboot handler registered. [ 0.370323] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.370472] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.370686] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.370736] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.370862] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.370909] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.371043] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.371104] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.371250] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.371297] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.373588] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.373627] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.373657] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.373685] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.373717] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.373745] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.373784] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.373820] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.373847] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.373921] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.373947] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.373987] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.374012] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.374039] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.374063] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.374087] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.374111] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.374205] mc-err: mcerr ops are set to t19x [ 0.386343] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.386369] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.386381] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.386393] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.394062] ACPI: Interpreter disabled. [ 0.395213] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.396421] iommu: Default domain type: Translated [ 0.396483] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.396824] SCSI subsystem initialized [ 0.396990] usbcore: registered new interface driver usbfs [ 0.397036] usbcore: registered new interface driver hub [ 0.397070] usbcore: registered new device driver usb [ 0.397440] mc: Linux media interface: v0.10 [ 0.397469] videodev: Linux video capture interface: v2.00 [ 0.397743] pps_core: LinuxPPS API ver. 1 registered [ 0.397754] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.397772] PTP clock support registered [ 0.397970] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.398288] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.398338] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.398919] Registered efivars operations [ 0.405781] FPGA manager framework [ 0.405885] Advanced Linux Sound Architecture Driver Initialized. [ 0.406478] Bluetooth: Core ver 2.22 [ 0.406520] NET: Registered protocol family 31 [ 0.406536] Bluetooth: HCI device and connection manager initialized [ 0.406551] Bluetooth: HCI socket layer initialized [ 0.406565] Bluetooth: L2CAP socket layer initialized [ 0.406587] Bluetooth: SCO socket layer initialized [ 0.407983] camchar: rtcpu character device driver loaded [ 0.408651] clocksource: Switched to clocksource arch_sys_counter [ 0.694656] VFS: Disk quotas dquot_6.6.0 [ 0.694733] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.695124] pnp: PnP ACPI: disabled [ 0.707384] la/ptsa driver initialized. [ 0.707532] NET: Registered protocol family 2 [ 0.707693] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.712247] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.712310] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.712586] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.713027] TCP: Hash tables configured (established 65536 bind 65536) [ 0.713150] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.713241] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.713420] NET: Registered protocol family 1 [ 0.714033] RPC: Registered named UNIX socket transport module. [ 0.714047] RPC: Registered udp transport module. [ 0.714057] RPC: Registered tcp transport module. [ 0.714066] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.714081] PCI: CLS 0 bytes, default 64 [ 0.714258] Trying to unpack rootfs image as initramfs... [ 0.903289] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.905526] Freeing initrd memory: 8196K [ 0.909302] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.909333] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.909364] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.909673] kvm [1]: IPA Size Limit: 40 bits [ 0.910109] kvm [1]: vgic interrupt IRQ9 [ 0.910506] kvm [1]: VHE mode initialized successfully [ 0.911922] Initialise system trusted keyrings [ 0.912203] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.917676] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.918441] NFS: Registering the id_resolver key type [ 0.918469] Key type id_resolver registered [ 0.918478] Key type id_legacy registered [ 0.918592] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.918611] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.918655] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.930994] NET: Registered protocol family 38 [ 0.931014] Key type asymmetric registered [ 0.931024] Asymmetric key parser 'x509' registered [ 0.931074] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.931308] io scheduler mq-deadline registered [ 0.931323] io scheduler kyber registered [ 0.935940] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.938363] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.938432] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.938504] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.938572] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.938642] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.943234] scrncapt: init (heads:4 wins:6 planes:4) [ 0.943510] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.944339] EINJ: ACPI disabled. [ 0.946980] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.947000] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.947011] tegra-pmc: ### PMC reset level: L1 [ 0.947020] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.947061] tegra-pmc: PMC Prod config success [ 0.952037] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.435679] random: fast init done [ 2.502653] printk: console [ttyTCU0] enabled [ 2.508853] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.513549] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.517830] arm-smmu 10000000.iommu: stage 1 translation [ 2.523598] arm-smmu 10000000.iommu: stage 2 translation [ 2.529113] arm-smmu 10000000.iommu: nested translation [ 2.534209] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.541636] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.551621] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.554507] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.561085] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.568928] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.574354] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.578834] arm-smmu 12000000.iommu: stage 1 translation [ 2.584585] arm-smmu 12000000.iommu: stage 2 translation [ 2.590018] arm-smmu 12000000.iommu: nested translation [ 2.595208] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.602613] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.612461] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.615499] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.622068] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.629631] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.639878] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.642768] tegra_profiler: auth: init [ 2.647020] THERMAL EST: found 3 subdevs [ 2.650402] THERMAL EST num_resources: 0 [ 2.653987] [THERMAL EST subdev 0] [ 2.657323] [THERMAL EST subdev 1] [ 2.660713] [THERMAL EST subdev 2] [ 2.664206] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.670384] THERMAL EST: thz register success. [ 2.674930] THERMAL EST: end of probe, return err: 0 [ 2.680229] nvsciipc: loaded module [ 2.686819] tun: Universal TUN/TAP device driver, 1.6 [ 2.689400] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.696001] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.701559] e1000e: Intel(R) PRO/1000 Network Driver [ 2.706474] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.712554] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.717855] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.723749] PPP generic driver version 2.4.2 [ 2.728285] PPP BSD Compression module registered [ 2.732576] PPP Deflate Compression module registered [ 2.738064] PPP MPPE Compression module registered [ 2.742839] usbcore: registered new interface driver r8152 [ 2.748342] usbcore: registered new interface driver asix [ 2.753668] usbcore: registered new interface driver ax88179_178a [ 2.760040] usbcore: registered new interface driver cdc_ether [ 2.766006] usbcore: registered new interface driver net1080 [ 2.771331] usbcore: registered new interface driver cdc_subset [ 2.777400] usbcore: registered new interface driver zaurus [ 2.783336] usbcore: registered new interface driver cdc_ncm [ 2.789005] usbcore: registered new interface driver aqc111 [ 2.794652] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.800753] ohci-pci: OHCI PCI platform driver [ 2.805030] ohci-platform: OHCI generic platform driver [ 2.810590] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.817045] usbcore: registered new interface driver uas [ 2.821067] usbcore: registered new interface driver usb-storage [ 2.827415] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.833298] mousedev: PS/2 mouse device common for all mice [ 2.838222] usbcore: registered new interface driver xpad [ 2.846311] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.849264] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.857023] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.863225] i2c /dev entries driver [ 2.866630] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.872360] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.877946] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.883390] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.888504] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.894199] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.899625] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.911858] device-mapper: uevent: version 1.0.3 [ 2.912271] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.919888] cpuidle: Initializing cpuidle driver [ 2.923648] sdhci: Secure Digital Host Controller Interface driver [ 2.928565] sdhci: Copyright(c) Pierre Ossman [ 2.932944] Synopsys Designware Multimedia Card Interface Driver [ 2.939070] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.945100] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.945648] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.958280] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.979900] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.988994] vdd-1v0: supplied by regulator-dummy [ 2.994425] vdd-1v8-hs: supplied by regulator-dummy [ 2.999238] vdd-1v8-ls: supplied by regulator-dummy [ 3.003967] vdd-1v8-ao: supplied by regulator-dummy [ 3.007812] vddio-ddr-1v1: supplied by regulator-dummy [ 3.012228] vdd-rtc: supplied by regulator-dummy [ 3.013909] spmic-ldo1: supplied by regulator-dummy [ 3.015096] vdd-ao-3v3: supplied by regulator-dummy [ 3.021213] vddio-emmc-3v3: supplied by regulator-dummy [ 3.027416] spmic-ldo4: supplied by regulator-dummy [ 3.028684] vdd-usb-3v3: supplied by regulator-dummy [ 3.034807] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.040986] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.046453] spmic-ldo8: supplied by vdd-1v8-ls [ 3.047839] gpio-510 (gpio_default): hogged as output/high [ 3.049152] gpio-511 (gpio_default): hogged as output/high [ 3.051871] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.190353] max77686-rtc max77620-rtc: registered as rtc0 [ 3.191330] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.191646] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.916187] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.917263] hid: raw HID events driver (C) Jiri Kosina [ 3.917977] usbcore: registered new interface driver usbhid [ 3.918121] usbhid: USB HID core driver [ 3.919964] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.921377] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.026795] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.101727] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 75.742 ms) ÿá[ 4.006795] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.007567] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.009122] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.010080] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.012094] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.012942] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.013589] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.015062] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.015296] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.017233] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.022700] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.028979] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.034054] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.041655] denver_knobs_init:MTS_VERSION:55637613 [ 4.052473] t19x_cache tegra-cache: probed [ 4.055874] optee: probing for conduit method. [ 4.056946] optee: revision 3.16 (65cc2218) [ 4.058022] optee: dynamic shared memory is enabled [ 4.061397] optee: initialized driver [ 4.068495] nvpmodel: initialized successfully [ 4.069227] tegra_hv: get_hvd: not initialized yet [ 4.073559] user_ivc_mempool: hypervisor not present [ 4.079741] usbcore: registered new interface driver snd-usb-audio [ 4.086618] u32 classifier [ 4.087255] input device check on [ 4.091100] Actions configured [ 4.094376] Initializing XFRM netlink socket [ 4.099450] NET: Registered protocol family 10 [ 4.105946] Segment Routing with IPv6 [ 4.106608] NET: Registered protocol family 17 [ 4.110913] NET: Registered protocol family 15 [ 4.115596] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.129097] Bluetooth: RFCOMM socket layer initialized [ 4.133833] Bluetooth: RFCOMM ver 1.11 [ 4.137473] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.143304] Bluetooth: HIDP socket layer initialized [ 4.149612] 9pnet: Installing 9P2000 support [ 4.152980] Key type dns_resolver registered [ 4.158234] registered taskstats version 1 [ 4.161444] Loading compiled-in X.509 certificates [ 4.172925] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.177168] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.186721] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.189162] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.197955] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.206145] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.320730] tegra194-pcie 14160000.pcie: Link up [ 4.323391] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.323606] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.323763] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.324002] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.324234] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.324624] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.325106] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.338611] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.339138] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.339609] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.341251] pci 0004:01:00.0: supports D1 D2 [ 4.341509] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.350291] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.350711] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.350950] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.351384] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.351625] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.351825] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.355470] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.362941] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.371236] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.381716] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.386448] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.392200] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.398739] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.408364] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.409192] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.417872] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.426344] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.528941] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.529632] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.529834] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.530011] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.530292] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.530490] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.530895] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.531360] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.547084] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.547492] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.549443] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.550746] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.552284] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.554154] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.555124] pci 0005:00:00.0: Removing from iommu group 7 [ 5.555450] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.586226] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.608474] host1x 13e10000.host1x: initialized [ 5.610151] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.611079] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.611875] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.612504] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.613325] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.613907] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.614586] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.615205] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.622295] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.628922] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.639420] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.645950] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.656155] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.662930] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.673446] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.680313] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.689933] falcon 15340000.vic: Adding to iommu group 17 [ 5.704806] falcon 15340000.vic: initialized [ 5.705788] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.710909] falcon 15380000.nvjpg: initialized [ 5.711545] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.722236] falcon 154c0000.nvenc: initialized [ 5.722964] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.733028] falcon 15a80000.nvenc1: initialized [ 5.733695] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.746470] nvdec 15480000.nvdec: initialized [ 5.747091] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.756495] nvdec 15140000.nvdec1: initialized [ 5.757166] tsec 15500000.tsec: Adding to iommu group 18 [ 5.762053] tsec 15500000.tsec: initialized [ 5.762582] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.770105] tsec 15100000.tsecb: initialized [ 5.774476] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.799167] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.811193] gpio-374 (wifi-enable): hogged as output/high [ 5.811472] gpio-431 (camera-control-output-low): hogged as output/low [ 5.811733] gpio-432 (camera-control-output-low): hogged as output/low [ 5.813314] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.815029] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.815556] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.821232] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.826799] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.832453] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.837947] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.846271] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.853468] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.864902] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.870277] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.876243] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.885073] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.894149] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.901713] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.908960] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.915476] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.924906] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.931368] pva 16000000.pva0: Adding to iommu group 22 [ 5.957703] pva 16000000.pva0: initialized [ 5.963113] pva 16800000.pva1: Adding to iommu group 23 [ 5.974023] pva 16800000.pva1: initialized [ 5.979083] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.991112] nvdla 15880000.nvdla0: initialized [ 5.992554] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.001509] nvdla 158c0000.nvdla1: initialized [ 6.003968] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.004303] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.004921] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.005079] tegradc 15200000.display: Adding to iommu group 26 [ 6.006547] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.007252] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.007690] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.009078] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.013445] tegradc 15210000.display: Adding to iommu group 26 [ 6.015187] tegradccommon 15200000.display-hub: dma mapping done [ 6.020325] tegra_cec 3960000.tegra_cec: probed [ 6.021574] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.044985] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.049739] kfuse 3830000.kfuse: initialized [ 6.054597] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.060259] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.067467] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.073695] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.082951] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.088249] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.097022] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.103055] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.123705] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.124102] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.126016] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.134260] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.142866] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.149684] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.157056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.164127] usb usb1: Product: xHCI Host Controller [ 6.169368] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.175413] usb usb1: SerialNumber: 3610000.xhci [ 6.181084] hub 1-0:1.0: USB hub found [ 6.184243] hub 1-0:1.0: 4 ports detected [ 6.189004] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.193400] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.200987] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.208995] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.216835] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.223811] usb usb2: Product: xHCI Host Controller [ 6.229021] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.235240] usb usb2: SerialNumber: 3610000.xhci [ 6.240930] hub 2-0:1.0: USB hub found [ 6.243483] hub 2-0:1.0: 4 ports detected [ 6.285172] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.291303] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.292486] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.292853] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.306517] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.307561] tegra194-cpufreq ccplex: probed with BWMGR [ 6.308776] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.309460] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.309971] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.311235] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.318074] tegra194-vi5 15c10000.vi: initialized [ 6.319780] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.322062] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.323923] generic_infoframe_type: 0x87 [ 6.330361] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.333772] tegradc 15200000.display: DT parsed successfully [ 6.342158] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.347523] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.347532] mmc0: CQHCI version 5.10 [ 6.354012] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.372490] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.378843] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.385808] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.392753] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.393591] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.400250] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.400542] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.408195] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.423016] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.430953] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.436826] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.445648] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.450521] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.468077] nvethernet 2490000.ethernet: Macsec not supported [ 6.468716] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.469352] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.469357] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.471338] tegradc 15200000.display: probed [ 6.475420] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.509861] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.514372] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.521731] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.528228] Console: switching to colour frame buffer device 240x67 [ 6.529159] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.532418] mmc0: Command Queue Engine enabled [ 6.532423] mmc0: periodic cache flush enabled [ 6.532441] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.532965] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.533104] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.534132] tegradc 15200000.display: fb registered [ 6.534205] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.537037] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.542275] tegra-se-nvhost 15810000.se: initialized [ 6.545785] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.554009] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.556199] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.561308] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.616687] tegra-se-nvhost 15820000.se: initialized [ 6.622819] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.627351] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.627976] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.633555] tegra-se-nvhost 15830000.se: initialized [ 6.643032] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.648037] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.648187] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.648194] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.648198] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.648202] usb 1-2: Manufacturer: Generic [ 6.650307] hub 1-2:1.0: USB hub found [ 6.651549] hub 1-2:1.0: 4 ports detected [ 6.654521] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.655192] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.661601] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.669466] Extcon AUX1(HDMI) enable [ 6.669751] tegradc 15210000.display: disp1 connected to head1->sor [ 6.677178] tegra-se-nvhost 15840000.se: initialized [ 6.681480] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.687081] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.689389] tegradc 15210000.display: DT parsed successfully [ 6.694889] tegra_actmon d230000.actmon: in actmon_register()... [ 6.701086] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.708521] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.714954] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.718712] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.724541] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.729708] hvc_sysfs: hypervisor is not present [ 6.743294] tegradc 15210000.display: probed [ 6.773664] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.775035] ALSA device list: ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.807564] tegradc 15210000.display: fb registered [ 6.807574] No soundcards found. [ 6.807660] tegradc 15200000.display: blank - powerdown [ 6.810962] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.810967] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.810975] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.818233] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.818240] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.818244] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.818248] usb 2-3: Manufacturer: Generic [ 6.828824] hub 2-3:1.0: USB hub found [ 6.830955] hub 2-3:1.0: 4 ports detected [ 6.845015] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.845019] Extcon AUX1(HDMI) disable [ 6.868371] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.869220] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.882354] tegradc 15200000.display: unblank [ 6.883642] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.883837] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.889824] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.891772] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.895828] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.895832] Extcon AUX1(HDMI) enable [ 6.908526] tegradc 15200000.display: sync windows ret = 247 [ 6.936715] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 6.963867] tegradc 15210000.display: blank - powerdown [ 6.968931] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.968934] Extcon DP: HPD disabled [ 6.968938] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.968950] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.977003] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 6.980540] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.987381] Extcon HDMI: HPD enabled [ 7.011273] tegradc 15200000.display: hdmi: plugged [ 7.012690] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.017268] Freeing unused kernel memory: 3968K [ 7.027461] Run /init as init process [ 7.077238] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.078842] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.088500] Root device found: mmcblk0p1 [ 7.091950] Found dev node: /dev/mmcblk0p1 [ 7.109816] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.111376] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.112973] usb 1-3: Product: Bluetooth Radio [ 7.114391] usb 1-3: Manufacturer: Realtek [ 7.115758] usb 1-3: SerialNumber: 00e04c000001 [ 7.128539] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.134088] Rootfs mounted over mmcblk0p1 [ 7.163408] Switching from initrd to actual rootfs [ 7.311985] systemd[1]: System time before build time, advancing clock. [ 7.383941] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.389163] systemd[1]: Detected architecture arm64. [ 7.430393] systemd[1]: Set hostname to . [ 7.591842] systemd-sysv-generator[257]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.949683] random: systemd: uninitialized urandom read (16 bytes read) [ 7.951408] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.953061] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.958603] systemd[1]: Created slice system-modprobe.slice. [ 7.962245] random: systemd: uninitialized urandom read (16 bytes read) [ 7.964924] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.968012] random: systemd: uninitialized urandom read (16 bytes read) [ 7.970707] systemd[1]: Created slice User and Session Slice. [ 7.974268] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.978495] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.981897] systemd[1]: Reached target User and Group Name Lookups. [ 7.985197] systemd[1]: Reached target Slices. [ 7.988294] systemd[1]: Reached target Swap. [ 7.992367] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.996088] systemd[1]: Listening on Syslog Socket. [ 7.999781] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.003219] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.008052] systemd[1]: Listening on Journal Audit Socket. [ 8.013224] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.017189] systemd[1]: Listening on Journal Socket. [ 8.021024] systemd[1]: Listening on udev Control Socket. [ 8.024704] systemd[1]: Listening on udev Kernel Socket. [ 8.033262] systemd[1]: Mounting Huge Pages File System... [ 8.041739] systemd[1]: Mounting POSIX Message Queue File System... [ 8.049867] systemd[1]: Mounting RPC Pipe File System... [ 8.058581] systemd[1]: Mounting Kernel Debug File System... [ 8.067599] systemd[1]: Mounting Kernel Trace File System... [ 8.078002] systemd[1]: Starting Journal Service... [ 8.087517] systemd[1]: Starting Set the console keyboard layout... [ 8.095980] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.099561] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.106060] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.114184] systemd[1]: Started Nameserver information manager. [ 8.118583] systemd[1]: Reached target Network (Pre). [ 8.126078] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.128308] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.135960] systemd[1]: Starting Load Kernel Modules... [ 8.143624] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.151411] systemd[1]: Starting udev Coldplug all Devices... [ 8.162831] systemd[1]: Mounted Huge Pages File System. [ 8.166591] systemd[1]: Mounted POSIX Message Queue File System. [ 8.170215] systemd[1]: Mounted RPC Pipe File System. [ 8.173711] systemd[1]: Mounted Kernel Debug File System. [ 8.177357] systemd[1]: Mounted Kernel Trace File System. [ 8.178008] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.179102] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.183029] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.184541] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.186022] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.187405] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.188975] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.189238] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.189463] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.204981] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.204991] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.222120] systemd[1]: nvfb-udev.service: Succeeded. [ 8.228373] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.241644] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.253318] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.255011] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.261508] systemd[1]: Starting Load/Save Random Seed... [ 8.269612] systemd[1]: Starting Create System Users... [ 8.306807] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.306807] [ 8.333064] systemd[1]: Finished Create System Users. [ 8.341352] systemd[1]: Finished Load Kernel Modules. [ 8.348053] systemd[1]: Finished Set the console keyboard layout. [ 8.352564] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.359480] systemd[1]: Mounting Kernel Configuration File System... [ 8.367223] systemd[1]: Started OP-TEE Client Supplicant. [ 8.375335] systemd[1]: Starting Apply Kernel Variables... [ 8.382893] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.393114] systemd[1]: Mounted Kernel Configuration File System. [ 9.694253] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.700836] imx219 9-0010: board setup failed [ 9.702279] imx219: probe of 9-0010 failed with error -121 [ 9.714625] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.721184] imx219 10-0010: board setup failed [ 9.723664] imx219: probe of 10-0010 failed with error -121 [ 9.780701] random: crng init done [ 9.781965] random: 7 urandom warning(s) missed due to ratelimiting [ 9.794621] hot-surface-alert cooling state: 0 -> 1 [ 11.047390] using random self ethernet address [ 11.048591] using random host ethernet address [ 11.172031] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.173563] Creating 1 MTD partitions on "spi6.0": [ 11.174787] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.176629] using random self ethernet address [ 12.177799] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.891816] nvidia: loading out-of-tree module taints kernel. [ 59.611262] watchdog: watchdog0: watchdog did not stop! [ 60.081536] Trying to unregister non-registered hwtime source [ 63.139194] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.140704] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aÿâclk_dt_late initialized ÿäuÿânoc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized cvc initialized ÿä 03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 202ÿâavfs_clk_platform_post initialized ÿä2 aÿâcvc_late initialized regulator_post initialized ÿäarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.629] I> edid read success [0003.641] I> edid read success [0003.641] I> width = 640, height = 480, frequency = 25174825 [0003.642] I> width = 1920, height = 1080, frequency = 148500000 [0003.642] I> width = 1280, height = 768, frequency = 79500000 [0003.643] I> width = 1360, height = 768, frequency = 85500000 [0003.643] I> width = 720, height = 480, frequency = 26973026 [0003.647] I> width = 720, height = 576, frequency = 26973026 [0003.652] I> width = 1280, height = 720, frequency = 74175824 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1920, height = 1080, frequency = 148351648 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 720, height = 480, frequency = 26973026 [0003.681] I> width = 720, height = 576, frequency = 26973026 [0003.686] I> width = 3840, height = 2160, frequency = 296703296 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 4096, height = 2160, frequency = 296703296 [0003.715] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.726] I> hdmi_enable, starting HDMI initialisation [0003.731] I> hdmi_enable, HDMI initialisation complete [0003.741] initializing target [0003.742] calling apps_init() [0003.742] starting app kernel_boot_app [0003.743] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000740] Console: colour dummy device 80x25 [ 0.002228] printk: console [tty0] enabled [ 0.002303] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002339] pid_max: default: 32768 minimum: 301 [ 0.002529] LSM: Security Framework initializing [ 0.002590] Yama: becoming mindful. [ 0.002633] SELinux: Initializing. [ 0.002800] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002842] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005897] rcu: Hierarchical SRCU implementation. [ 0.006180] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007029] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007100] DTB Build time: Aug 10 2022 20:31:49 [ 0.009937] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010232] Remapping and enabling EFI services. [ 0.012237] smp: Bringing up secondary CPUs ... [ 0.041923] Detected PIPT I-cache on CPU1 [ 0.042037] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074732] Detected PIPT I-cache on CPU2 [ 0.074882] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104461] Detected PIPT I-cache on CPU3 [ 0.104599] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134309] Detected PIPT I-cache on CPU4 [ 0.134423] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164045] Detected PIPT I-cache on CPU5 [ 0.164186] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164615] smp: Brought up 1 node, 6 CPUs [ 0.164907] SMP: Total of 6 processors activated. [ 0.164990] CPU features: detected: Privileged Access Never [ 0.165014] CPU features: detected: LSE atomic instructions [ 0.165026] CPU features: detected: User Access Override [ 0.165039] CPU features: detected: 32-bit EL0 Support [ 0.165051] CPU features: detected: RAS Extension Support [ 0.165063] CPU features: detected: CRC32 instructions [ 0.165076] CPU features: detected: 32-bit EL1 Support [ 0.234613] CPU: All CPU(s) started at EL2 [ 0.240066] devtmpfs: initialized [ 0.305096] Registered cp15_barrier emulation handler [ 0.305224] Registered setend emulation handler [ 0.305260] KASLR enabled [ 0.305587] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.305668] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.308093] pinctrl core: initialized pinctrl subsystem [ 0.309252] SMBIOS 3.0.0 present. [ 0.309298] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.310320] NET: Registered protocol family 16 [ 0.312950] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.313736] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.314861] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.314975] audit: initializing netlink subsys (disabled) [ 0.315311] audit: type=2000 audit(0.312:1): state=initialized audit_enabled=0 res=1 [ 0.315814] thermal_sys: Registered thermal governor 'step_wise' [ 0.315823] thermal_sys: Registered thermal governor 'power_allocator' [ 0.315851] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.319364] cpuidle: using governor menu [ 0.319931] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.320485] ASID allocator initialised with 32768 entries [ 0.320897] Serial: AMBA PL011 UART driver [ 0.325565] Tegra reboot handler registered. [ 0.409954] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.410153] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.410381] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.410480] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.410722] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.410796] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.410988] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.411062] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.411232] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.411296] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.414958] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.415005] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.415070] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.415109] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.415151] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.415215] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.415268] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.415320] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.415355] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.415390] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.415424] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.415458] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.415491] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.415525] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.415558] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.415592] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.415625] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.415746] mc-err: mcerr ops are set to t19x [ 0.431156] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.431187] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.431206] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.431224] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.439125] ACPI: Interpreter disabled. [ 0.440660] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.442507] iommu: Default domain type: Translated [ 0.442645] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.443203] SCSI subsystem initialized [ 0.443391] usbcore: registered new interface driver usbfs [ 0.443441] usbcore: registered new interface driver hub [ 0.443486] usbcore: registered new device driver usb [ 0.444304] mc: Linux media interface: v0.10 [ 0.444351] videodev: Linux video capture interface: v2.00 [ 0.444755] pps_core: LinuxPPS API ver. 1 registered [ 0.444772] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.444804] PTP clock support registered [ 0.445067] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.445547] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.445668] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.446355] Registered efivars operations [ 0.453978] FPGA manager framework [ 0.454107] Advanced Linux Sound Architecture Driver Initialized. [ 0.454950] Bluetooth: Core ver 2.22 [ 0.455001] NET: Registered protocol family 31 [ 0.455018] Bluetooth: HCI device and connection manager initialized [ 0.455041] Bluetooth: HCI socket layer initialized [ 0.455059] Bluetooth: L2CAP socket layer initialized [ 0.455087] Bluetooth: SCO socket layer initialized [ 0.456840] camchar: rtcpu character device driver loaded [ 0.457656] clocksource: Switched to clocksource arch_sys_counter [ 0.852118] VFS: Disk quotas dquot_6.6.0 [ 0.852218] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.852692] pnp: PnP ACPI: disabled [ 0.865716] la/ptsa driver initialized. [ 0.865877] NET: Registered protocol family 2 [ 0.866073] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.873792] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.873925] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.874276] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.874898] TCP: Hash tables configured (established 65536 bind 65536) [ 0.875071] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.875234] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.875516] NET: Registered protocol family 1 [ 0.876438] RPC: Registered named UNIX socket transport module. [ 0.876476] RPC: Registered udp transport module. [ 0.876494] RPC: Registered tcp transport module. [ 0.876511] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.876540] PCI: CLS 0 bytes, default 64 [ 0.876825] Trying to unpack rootfs image as initramfs... [ 1.145789] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.148914] Freeing initrd memory: 8196K [ 1.153139] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.153181] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.153220] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.153514] kvm [1]: IPA Size Limit: 40 bits [ 1.154072] kvm [1]: vgic interrupt IRQ9 [ 1.154610] kvm [1]: VHE mode initialized successfully [ 1.156020] Initialise system trusted keyrings [ 1.156305] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.161823] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.162693] NFS: Registering the id_resolver key type [ 1.162729] Key type id_resolver registered [ 1.162743] Key type id_legacy registered [ 1.162831] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.162854] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.162893] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.172576] NET: Registered protocol family 38 [ 1.172599] Key type asymmetric registered [ 1.172642] Asymmetric key parser 'x509' registered [ 1.172703] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.172925] io scheduler mq-deadline registered [ 1.172944] io scheduler kyber registered [ 1.178435] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.181511] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.181587] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.181699] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.181771] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.181838] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.187299] scrncapt: init (heads:4 wins:6 planes:4) [ 1.187460] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.188450] EINJ: ACPI disabled. [ 1.191865] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.191890] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.191905] tegra-pmc: ### PMC reset level: L1 [ 1.191918] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.191972] tegra-pmc: PMC Prod config success [ 1.196927] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.202306] random: fast init done [ 1.202618] printk: console [ttyTCU0] enabled [ 2.753886] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.758755] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.763341] arm-smmu 10000000.iommu: stage 1 translation [ 2.769089] arm-smmu 10000000.iommu: stage 2 translation [ 2.774310] arm-smmu 10000000.iommu: nested translation [ 2.779913] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.787084] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.795939] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.800219] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.806774] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.814013] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.819809] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.824273] arm-smmu 12000000.iommu: stage 1 translation [ 2.830039] arm-smmu 12000000.iommu: stage 2 translation [ 2.835465] arm-smmu 12000000.iommu: nested translation [ 2.840636] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.848076] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.856832] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.861198] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.867498] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.875039] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.884493] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.887906] tegra_profiler: auth: init [ 2.892498] THERMAL EST: found 3 subdevs [ 2.895878] THERMAL EST num_resources: 0 [ 2.899438] [THERMAL EST subdev 0] [ 2.903036] [THERMAL EST subdev 1] [ 2.906429] [THERMAL EST subdev 2] [ 2.909696] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.915816] THERMAL EST: thz register success. [ 2.920378] THERMAL EST: end of probe, return err: 0 [ 2.925330] nvsciipc: loaded module [ 2.932071] tun: Universal TUN/TAP device driver, 1.6 [ 2.935128] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.941452] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.946739] e1000e: Intel(R) PRO/1000 Network Driver [ 2.951927] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.957750] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.963302] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.969187] PPP generic driver version 2.4.2 [ 2.973496] PPP BSD Compression module registered [ 2.978274] PPP Deflate Compression module registered [ 2.983261] PPP MPPE Compression module registered [ 2.988536] usbcore: registered new interface driver r8152 [ 2.994040] usbcore: registered new interface driver asix [ 2.999375] usbcore: registered new interface driver ax88179_178a [ 3.005491] usbcore: registered new interface driver cdc_ether [ 3.011191] usbcore: registered new interface driver net1080 [ 3.016785] usbcore: registered new interface driver cdc_subset [ 3.023081] usbcore: registered new interface driver zaurus [ 3.028521] usbcore: registered new interface driver cdc_ncm [ 3.034201] usbcore: registered new interface driver aqc111 [ 3.039839] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.045927] ohci-pci: OHCI PCI platform driver [ 3.050483] ohci-platform: OHCI generic platform driver [ 3.056033] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.062480] usbcore: registered new interface driver uas [ 3.066509] usbcore: registered new interface driver usb-storage [ 3.072857] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.078760] mousedev: PS/2 mouse device common for all mice [ 3.083664] usbcore: registered new interface driver xpad [ 3.091422] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.094672] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.102460] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.108881] i2c /dev entries driver [ 3.112321] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.118340] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.123352] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.128637] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.133978] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.139433] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.144845] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.158703] device-mapper: uevent: version 1.0.3 [ 3.159123] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.165516] cpuidle: Initializing cpuidle driver [ 3.169728] sdhci: Secure Digital Host Controller Interface driver [ 3.174018] sdhci: Copyright(c) Pierre Ossman [ 3.178390] Synopsys Designware Multimedia Card Interface Driver [ 3.184329] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.190562] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.196492] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.203872] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.227349] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.237134] vdd-1v0: supplied by regulator-dummy [ 3.242615] vdd-1v8-hs: supplied by regulator-dummy [ 3.247405] vdd-1v8-ls: supplied by regulator-dummy [ 3.252188] vdd-1v8-ao: supplied by regulator-dummy [ 3.256139] vddio-ddr-1v1: supplied by regulator-dummy [ 3.260593] vdd-rtc: supplied by regulator-dummy [ 3.262345] spmic-ldo1: supplied by regulator-dummy [ 3.263600] vdd-ao-3v3: supplied by regulator-dummy [ 3.269734] vddio-emmc-3v3: supplied by regulator-dummy [ 3.276051] spmic-ldo4: supplied by regulator-dummy [ 3.277273] vdd-usb-3v3: supplied by regulator-dummy [ 3.283561] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.289808] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.295379] spmic-ldo8: supplied by vdd-1v8-ls [ 3.296842] gpio-510 (gpio_default): hogged as output/high [ 3.298228] gpio-511 (gpio_default): hogged as output/high [ 3.301155] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.437072] max77686-rtc max77620-rtc: registered as rtc0 [ 3.438420] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.438797] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.263693] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.265349] hid: raw HID events driver (C) Jiri Kosina [ 4.266294] usbcore: registered new interface driver usbhid [ 4.266463] usbhid: USB HID core driver [ 4.269306] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.271120] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.328811] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.400976] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 72.974 ms) ÿá[ 4.354089] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.354816] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.355986] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.356947] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.358952] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.359619] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.360239] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.361875] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.362088] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.364732] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.370664] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.376491] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.382790] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.388583] denver_knobs_init:MTS_VERSION:55637613 [ 4.400273] t19x_cache tegra-cache: probed [ 4.403620] optee: probing for conduit method. [ 4.404454] optee: revision 3.16 (65cc2218) [ 4.405470] optee: dynamic shared memory is enabled [ 4.408752] optee: initialized driver [ 4.415766] nvpmodel: initialized successfully [ 4.416368] tegra_hv: get_hvd: not initialized yet [ 4.421121] user_ivc_mempool: hypervisor not present [ 4.427131] usbcore: registered new interface driver snd-usb-audio [ 4.433264] u32 classifier [ 4.434532] input device check on [ 4.438196] Actions configured [ 4.442282] Initializing XFRM netlink socket [ 4.446968] NET: Registered protocol family 10 [ 4.453465] Segment Routing with IPv6 [ 4.454258] NET: Registered protocol family 17 [ 4.458421] NET: Registered protocol family 15 [ 4.463271] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.476424] Bluetooth: RFCOMM socket layer initialized [ 4.481344] Bluetooth: RFCOMM ver 1.11 [ 4.484995] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.491060] Bluetooth: HIDP socket layer initialized [ 4.496717] 9pnet: Installing 9P2000 support [ 4.500517] Key type dns_resolver registered [ 4.505836] registered taskstats version 1 [ 4.508943] Loading compiled-in X.509 certificates [ 4.520887] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.524515] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.534946] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.536830] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.545198] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.553820] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.669772] tegra194-pcie 14160000.pcie: Link up [ 4.672685] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.672990] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.673125] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.673426] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.673754] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.674154] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.674629] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.686773] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.687545] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.688050] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.689751] pci 0004:01:00.0: supports D1 D2 [ 4.690134] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.701198] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.701718] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.701967] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.702498] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.702808] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.703013] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.704290] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.711752] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.720555] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.730593] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.735194] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.741025] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.747999] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.756703] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.758436] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.766681] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.775383] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.890539] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.891086] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.891332] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.891491] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.891749] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.891972] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.892365] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.892908] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.913537] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.913892] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.915530] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.916653] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.918298] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.920143] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.920876] pci 0005:00:00.0: Removing from iommu group 7 [ 5.921165] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.955660] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.981045] host1x 13e10000.host1x: initialized [ 5.982834] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.983786] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.984980] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.985797] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.987198] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.987856] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.988992] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.989550] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.990838] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.991507] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.000537] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.007387] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.017767] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.024429] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.034687] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.041541] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.051332] falcon 15340000.vic: Adding to iommu group 17 [ 6.066371] falcon 15340000.vic: initialized [ 6.067598] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.073561] falcon 15380000.nvjpg: initialized [ 6.074247] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.085537] falcon 154c0000.nvenc: initialized [ 6.086570] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.095243] falcon 15a80000.nvenc1: initialized [ 6.096036] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.107375] nvdec 15480000.nvdec: initialized [ 6.108009] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.117578] nvdec 15140000.nvdec1: initialized [ 6.118290] tsec 15500000.tsec: Adding to iommu group 18 [ 6.123792] tsec 15500000.tsec: initialized [ 6.124320] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.131631] tsec 15100000.tsecb: initialized [ 6.136285] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.164333] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.176347] gpio-374 (wifi-enable): hogged as output/high [ 6.176649] gpio-431 (camera-control-output-low): hogged as output/low [ 6.176947] gpio-432 (camera-control-output-low): hogged as output/low [ 6.178506] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.180491] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.181017] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.182795] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.188416] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.193962] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.199817] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.207995] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.215216] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.226602] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.231944] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.237798] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.246429] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.255925] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.263152] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.270629] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.276709] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.286725] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.292879] pva 16000000.pva0: Adding to iommu group 22 [ 6.319268] pva 16000000.pva0: initialized [ 6.323939] pva 16800000.pva1: Adding to iommu group 23 [ 6.335594] pva 16800000.pva1: initialized [ 6.340199] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.354192] nvdla 15880000.nvdla0: initialized [ 6.355563] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.363891] nvdla 158c0000.nvdla1: initialized [ 6.368017] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.368422] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.368570] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.368809] tegradccommon 15200000.display-hub: dma mapping done [ 6.368948] tegradc 15200000.display: Adding to iommu group 26 [ 6.369144] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.370593] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.376661] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.378703] tegradc 15210000.display: Adding to iommu group 26 [ 6.378802] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.378920] generic_infoframe_type: 0x87 [ 6.379046] tegradc 15200000.display: DT parsed successfully [ 6.379149] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.382622] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.383634] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.383646] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.383650] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.384639] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.384649] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.386322] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.388744] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.394375] tegra_cec 3960000.tegra_cec: probed [ 6.395312] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.399499] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.406651] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.414052] tegradc 15210000.display: disp0 connected to head1->sor [ 6.418290] kfuse 3830000.kfuse: initialized [ 6.426372] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.435013] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.442896] tegradc 15210000.display: DT parsed successfully [ 6.448434] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.449035] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.454805] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.526736] random: crng init done [ 6.551057] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.560971] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.565887] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.574991] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.580429] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.600815] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.601241] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.603686] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.612399] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.620713] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.627539] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.634820] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.642013] usb usb1: Product: xHCI Host Controller [ 6.646954] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.653500] usb usb1: SerialNumber: 3610000.xhci [ 6.659228] hub 1-0:1.0: USB hub found [ 6.662130] hub 1-0:1.0: 4 ports detected [ 6.666639] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.671217] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.679064] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.686752] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.694470] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.701661] usb usb2: Product: xHCI Host Controller [ 6.706871] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.713084] usb usb2: SerialNumber: 3610000.xhci [ 6.718626] hub 2-0:1.0: USB hub found [ 6.721555] hub 2-0:1.0: 4 ports detected [ 6.762894] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.769039] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.770687] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.770892] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.784554] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.785724] tegra194-cpufreq ccplex: probed with BWMGR [ 6.786977] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.787430] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.787918] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.789043] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.797301] tegra194-vi5 15c10000.vi: initialized [ 6.798775] tegradc 15210000.display: disp0 connected to head1->sor [ 6.799662] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.801539] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.807779] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.814847] mmc0: CQHCI version 5.10 [ 6.814947] tegradc 15210000.display: DT parsed successfully [ 6.814954] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.815060] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.815110] generic_infoframe_type: 0x87 [ 6.815174] tegradc 15200000.display: DT parsed successfully [ 6.815222] tegradc 15200000.display: Display dc.000000003b84c0b7 registered with id=0 [ 6.822958] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.827432] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.832339] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.832344] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.832348] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.837701] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.840037] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.846355] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.850280] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.850628] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.855656] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.856168] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.864293] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.871885] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.879330] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.893544] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.898446] nvethernet 2490000.ethernet: Macsec not supported [ 6.904980] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.953652] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.955103] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.967087] tegradc 15200000.display: probed [ 6.974932] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.999265] mmc0: Command Queue Engine enabled [ 7.001359] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.013762] mmc0: periodic cache flush enabled [ 7.019367] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.023458] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.024183] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.032280] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.035327] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.067080] Console: switching to colour frame buffer device 240x67 [ 7.068585] tegra-se-nvhost 15810000.se: initialized [ 7.072898] tegradc 15200000.display: fb registered [ 7.072963] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.082709] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.083923] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.088842] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.095483] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.113635] tegra-se-nvhost 15820000.se: initialized [ 7.115406] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.119680] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.132364] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.138914] tegra-se-nvhost 15830000.se: initialized [ 7.144472] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.145093] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.149678] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.157855] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.164356] tegra-se-nvhost 15840000.se: initialized [ 7.171086] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.171095] usb 1-2: Manufacturer: Generic [ 7.171517] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.172578] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.172586] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.173158] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.173162] Extcon AUX1(HDMI) enable [ 7.173268] tegradc 15210000.display: disp1 connected to head1->sor [ 7.173418] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.173470] tegradc 15210000.display: DT parsed successfully [ 7.173513] tegradc 15210000.display: Display dc.000000006e2b7c4c registered with id=1 [ 7.173644] tegradc 15210000.display: vblank syncpt # 16 for dc 1 [ 7.173650] tegradc 15210000.display: vpulse3 syncpt # 17 for dc 1 [ 7.178129] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.180107] tegradc 15210000.display: probed [ 7.182665] hub 1-2:1.0: USB hub found [ 7.186340] tegra_actmon d230000.actmon: in actmon_register()... [ 7.194884] hub 1-2:1.0: 4 ports detected [ 7.201595] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.262522] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.266291] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.305429] tegradc 15210000.display: fb registered [ 7.306090] hvc_sysfs: hypervisor is not present [ 7.313513] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.320083] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.321822] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.321832] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.341050] ALSA device list: [ 7.343014] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.346398] No soundcards found. [ 7.356737] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.356742] usb 2-3: Manufacturer: Generic [ 7.356774] tegradc 15210000.display: blank - powerdown [ 7.367518] hub 2-3:1.0: USB hub found [ 7.371076] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.371080] Extcon DP: HPD disabled [ 7.371087] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.376955] hub 2-3:1.0: 4 ports detected [ 7.383006] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.397652] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.403370] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.416982] tegradc 15200000.display: blank - powerdown [ 7.437659] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.455305] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.455310] Extcon AUX1(HDMI) disable [ 7.469400] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.469405] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.478456] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.479285] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.490972] tegradc 15200000.display: unblank [ 7.492061] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.492249] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.498205] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.499996] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.503934] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.503938] Extcon AUX1(HDMI) enable [ 7.516760] tegradc 15200000.display: sync windows ret = 247 [ 7.545222] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.546243] Freeing unused kernel memory: 3968K [ 7.546772] Extcon HDMI: HPD enabled [ 7.548317] Run /init as init process [ 7.549742] tegradc 15200000.display: hdmi: plugged [ 7.586955] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.588564] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.590137] usb 1-3: Product: Bluetooth Radio [ 7.591601] usb 1-3: Manufacturer: Realtek [ 7.593104] usb 1-3: SerialNumber: 00e04c000001 [ 7.606796] Root device found: mmcblk0p1 [ 7.610309] Found dev node: /dev/mmcblk0p1 [ 7.646409] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.651966] Rootfs mounted over mmcblk0p1 [ 7.688134] Switching from initrd to actual rootfs [ 7.838200] systemd[1]: System time before build time, advancing clock. [ 7.908672] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.913703] systemd[1]: Detected architecture arm64. [ 7.952185] systemd[1]: Set hostname to . [ 8.117918] systemd-sysv-generator[245]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.468632] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.470323] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.475827] systemd[1]: Created slice system-modprobe.slice. [ 8.480343] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.484454] systemd[1]: Created slice User and Session Slice. [ 8.487793] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.491741] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.494999] systemd[1]: Reached target User and Group Name Lookups. [ 8.498078] systemd[1]: Reached target Slices. [ 8.500997] systemd[1]: Reached target Swap. [ 8.504905] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.508548] systemd[1]: Listening on Syslog Socket. [ 8.511971] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.515256] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.519372] systemd[1]: Listening on Journal Audit Socket. [ 8.522784] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.526472] systemd[1]: Listening on Journal Socket. [ 8.530000] systemd[1]: Listening on udev Control Socket. [ 8.533363] systemd[1]: Listening on udev Kernel Socket. [ 8.543201] systemd[1]: Mounting Huge Pages File System... [ 8.552951] systemd[1]: Mounting POSIX Message Queue File System... [ 8.560959] systemd[1]: Mounting RPC Pipe File System... [ 8.569464] systemd[1]: Mounting Kernel Debug File System... [ 8.577902] systemd[1]: Mounting Kernel Trace File System... [ 8.587489] systemd[1]: Starting Journal Service... [ 8.595900] systemd[1]: Starting Set the console keyboard layout... [ 8.604047] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.607573] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.614299] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.622257] systemd[1]: Started Nameserver information manager. [ 8.626930] systemd[1]: Reached target Network (Pre). [ 8.633694] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.635498] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.643720] systemd[1]: Starting Load Kernel Modules... [ 8.651090] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.658783] systemd[1]: Starting udev Coldplug all Devices... [ 8.669010] systemd[1]: Mounted Huge Pages File System. [ 8.672812] systemd[1]: Mounted POSIX Message Queue File System. [ 8.676409] systemd[1]: Mounted RPC Pipe File System. [ 8.679900] systemd[1]: Mounted Kernel Debug File System. [ 8.681500] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.682450] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.685395] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.685409] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.685419] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.685422] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.685637] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.685877] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.694561] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.697477] systemd[1]: Mounted Kernel Trace File System. [ 8.698050] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.715619] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.723065] systemd[1]: nvfb-udev.service: Succeeded. [ 8.727350] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.739425] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.745113] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.747079] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.762446] systemd[1]: Starting Load/Save Random Seed... [ 8.769820] systemd[1]: Starting Create System Users... [ 8.808646] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.808646] [ 8.821553] systemd[1]: Finished Load/Save Random Seed. [ 8.833649] systemd[1]: Finished Create System Users. [ 8.840287] systemd[1]: Finished Load Kernel Modules. [ 8.844630] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.851175] systemd[1]: Mounting Kernel Configuration File System... [ 8.859264] systemd[1]: Started OP-TEE Client Supplicant. [ 8.867595] systemd[1]: Starting Apply Kernel Variables... [ 8.875863] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.886344] systemd[1]: Finished Set the console keyboard layout. [ 8.893123] systemd[1]: Mounted Kernel Configuration File System. [ 10.304250] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.311820] imx219 9-0010: board setup failed [ 10.313135] imx219: probe of 9-0010 failed with error -121 [ 10.330196] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.341292] imx219 10-0010: board setup failed [ 10.346800] imx219: probe of 10-0010 failed with error -121 [ 10.376139] hot-surface-alert cooling state: 0 -> 1 [ 11.160570] using random self ethernet address [ 11.179075] using random host ethernet address [ 11.834732] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.836407] Creating 1 MTD partitions on "spi6.0": [ 11.838539] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.580297] using random self ethernet address [ 12.581952] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.866194] nvidia: loading out-of-tree module taints kernel. [ 59.572873] watchdog: watchdog0: watchdog did not stop! [ 60.046677] Trying to unregister non-registered hwtime source [ 63.108982] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.110570] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERòÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNIÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäNG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.614] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.631] I> edid read success [0003.643] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.644] I> width = 1920, height = 1080, frequency = 148500000 [0003.644] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.645] I> width = 720, height = 480, frequency = 26973026 [0003.649] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 720, height = 480, frequency = 26973026 [0003.683] I> width = 720, height = 576, frequency = 26973026 [0003.688] I> width = 3840, height = 2160, frequency = 296703296 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.717] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.733] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.744] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000712] Console: colour dummy device 80x25 [ 0.002160] printk: console [tty0] enabled [ 0.002224] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002270] pid_max: default: 32768 minimum: 301 [ 0.002498] LSM: Security Framework initializing [ 0.002559] Yama: becoming mindful. [ 0.002602] SELinux: Initializing. [ 0.002756] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002793] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005626] rcu: Hierarchical SRCU implementation. [ 0.005914] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006577] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006629] DTB Build time: Aug 10 2022 20:31:49 [ 0.009372] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009627] Remapping and enabling EFI services. [ 0.011697] smp: Bringing up secondary CPUs ... [ 0.040964] Detected PIPT I-cache on CPU1 [ 0.041069] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072836] Detected PIPT I-cache on CPU2 [ 0.072985] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102487] Detected PIPT I-cache on CPU3 [ 0.102707] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132447] Detected PIPT I-cache on CPU4 [ 0.132661] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162434] Detected PIPT I-cache on CPU5 [ 0.162567] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162983] smp: Brought up 1 node, 6 CPUs [ 0.163164] SMP: Total of 6 processors activated. [ 0.163181] CPU features: detected: Privileged Access Never [ 0.163193] CPU features: detected: LSE atomic instructions [ 0.163206] CPU features: detected: User Access Override [ 0.163219] CPU features: detected: 32-bit EL0 Support [ 0.163232] CPU features: detected: RAS Extension Support [ 0.163245] CPU features: detected: CRC32 instructions [ 0.163259] CPU features: detected: 32-bit EL1 Support [ 0.232722] CPU: All CPU(s) started at EL2 [ 0.238147] devtmpfs: initialized [ 0.286496] Registered cp15_barrier emulation handler [ 0.286650] Registered setend emulation handler [ 0.286672] KASLR enabled [ 0.286937] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286981] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288343] pinctrl core: initialized pinctrl subsystem [ 0.289251] SMBIOS 3.0.0 present. [ 0.289280] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289896] NET: Registered protocol family 16 [ 0.291837] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292338] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293055] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.293118] audit: initializing netlink subsys (disabled) [ 0.293377] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293774] thermal_sys: Registered thermal governor 'step_wise' [ 0.293780] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293794] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295827] cpuidle: using governor menu [ 0.296178] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296548] ASID allocator initialised with 32768 entries [ 0.296750] Serial: AMBA PL011 UART driver [ 0.299688] Tegra reboot handler registered. [ 0.371236] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.371363] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.371547] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.371591] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.371708] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.371747] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.371890] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.371947] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372060] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372099] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.374201] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.374237] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.374265] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.374292] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.374326] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.374353] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.374391] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.374423] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.374447] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.374471] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.374497] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.374524] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.374565] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.374590] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.374616] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.374640] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.374663] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.374749] mc-err: mcerr ops are set to t19x [ 0.386400] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.386432] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.386445] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.386457] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.392499] ACPI: Interpreter disabled. [ 0.393537] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.394719] iommu: Default domain type: Translated [ 0.394782] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.395166] SCSI subsystem initialized [ 0.395316] usbcore: registered new interface driver usbfs [ 0.395356] usbcore: registered new interface driver hub [ 0.395389] usbcore: registered new device driver usb [ 0.395738] mc: Linux media interface: v0.10 [ 0.395764] videodev: Linux video capture interface: v2.00 [ 0.396078] pps_core: LinuxPPS API ver. 1 registered [ 0.396110] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.396132] PTP clock support registered [ 0.396344] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.396599] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.396679] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.397202] Registered efivars operations [ 0.402124] FPGA manager framework [ 0.402242] Advanced Linux Sound Architecture Driver Initialized. [ 0.402813] Bluetooth: Core ver 2.22 [ 0.402851] NET: Registered protocol family 31 [ 0.402862] Bluetooth: HCI device and connection manager initialized [ 0.402878] Bluetooth: HCI socket layer initialized [ 0.402892] Bluetooth: L2CAP socket layer initialized [ 0.402913] Bluetooth: SCO socket layer initialized [ 0.404421] camchar: rtcpu character device driver loaded [ 0.405144] clocksource: Switched to clocksource arch_sys_counter [ 0.700751] VFS: Disk quotas dquot_6.6.0 [ 0.700829] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.701213] pnp: PnP ACPI: disabled [ 0.710960] la/ptsa driver initialized. [ 0.711087] NET: Registered protocol family 2 [ 0.711267] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.715939] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.716065] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.716310] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.716745] TCP: Hash tables configured (established 65536 bind 65536) [ 0.716910] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.717013] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.717248] NET: Registered protocol family 1 [ 0.718246] RPC: Registered named UNIX socket transport module. [ 0.718311] RPC: Registered udp transport module. [ 0.718332] RPC: Registered tcp transport module. [ 0.718351] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.718382] PCI: CLS 0 bytes, default 64 [ 0.718645] Trying to unpack rootfs image as initramfs... [ 0.988094] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.991389] Freeing initrd memory: 8196K [ 0.995656] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.995692] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.995754] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.996108] kvm [1]: IPA Size Limit: 40 bits [ 0.996649] kvm [1]: vgic interrupt IRQ9 [ 0.997323] kvm [1]: VHE mode initialized successfully [ 0.998758] Initialise system trusted keyrings [ 0.999102] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.005078] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.006065] NFS: Registering the id_resolver key type [ 1.006136] Key type id_resolver registered [ 1.006179] Key type id_legacy registered [ 1.006266] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.006291] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.006336] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.018563] NET: Registered protocol family 38 [ 1.018589] Key type asymmetric registered [ 1.018605] Asymmetric key parser 'x509' registered [ 1.018657] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.018897] io scheduler mq-deadline registered [ 1.018915] io scheduler kyber registered [ 1.025196] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.028328] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.028439] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.028538] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.028634] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.028701] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.034325] scrncapt: init (heads:4 wins:6 planes:4) [ 1.034349] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.035402] EINJ: ACPI disabled. [ 1.038646] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.038671] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.038687] tegra-pmc: ### PMC reset level: L1 [ 1.038725] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.038772] tegra-pmc: PMC Prod config success [ 1.044147] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.063887] random: fast init done [ 1.072270] printk: console [ttyTCU0] enabled [ 2.601875] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.606020] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.610633] arm-smmu 10000000.iommu: stage 1 translation [ 2.616182] arm-smmu 10000000.iommu: stage 2 translation [ 2.621591] arm-smmu 10000000.iommu: nested translation [ 2.627180] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.634355] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.645920] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.647453] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.653785] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.661881] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.667087] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.671801] arm-smmu 12000000.iommu: stage 1 translation [ 2.677313] arm-smmu 12000000.iommu: stage 2 translation [ 2.682735] arm-smmu 12000000.iommu: nested translation [ 2.688164] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.695350] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.706542] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.708444] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.714772] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.722557] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.732147] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.735242] tegra_profiler: auth: init [ 2.739629] THERMAL EST: found 3 subdevs [ 2.743124] THERMAL EST num_resources: 0 [ 2.746962] [THERMAL EST subdev 0] [ 2.750031] [THERMAL EST subdev 1] [ 2.753698] [THERMAL EST subdev 2] [ 2.756668] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.763428] THERMAL EST: thz register success. [ 2.767388] THERMAL EST: end of probe, return err: 0 [ 2.772997] nvsciipc: loaded module [ 2.780269] tun: Universal TUN/TAP device driver, 1.6 [ 2.782638] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.788468] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.794282] e1000e: Intel(R) PRO/1000 Network Driver [ 2.798943] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.805293] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.810322] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.816527] PPP generic driver version 2.4.2 [ 2.820748] PPP BSD Compression module registered [ 2.825553] PPP Deflate Compression module registered [ 2.830548] PPP MPPE Compression module registered [ 2.835815] usbcore: registered new interface driver r8152 [ 2.841066] usbcore: registered new interface driver asix [ 2.846401] usbcore: registered new interface driver ax88179_178a [ 2.852519] usbcore: registered new interface driver cdc_ether [ 2.858468] usbcore: registered new interface driver net1080 [ 2.864326] usbcore: registered new interface driver cdc_subset [ 2.870114] usbcore: registered new interface driver zaurus [ 2.875809] usbcore: registered new interface driver cdc_ncm [ 2.881736] usbcore: registered new interface driver aqc111 [ 2.887137] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.893465] ohci-pci: OHCI PCI platform driver [ 2.897760] ohci-platform: OHCI generic platform driver [ 2.903730] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.910272] usbcore: registered new interface driver uas [ 2.913798] usbcore: registered new interface driver usb-storage [ 2.919977] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.926283] mousedev: PS/2 mouse device common for all mice [ 2.930960] usbcore: registered new interface driver xpad [ 2.939465] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.941971] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.949537] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.956083] i2c /dev entries driver [ 2.959365] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.965794] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.970759] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.975909] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.981247] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.986973] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.992133] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.006348] device-mapper: uevent: version 1.0.3 [ 3.006783] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.012791] cpuidle: Initializing cpuidle driver [ 3.017004] sdhci: Secure Digital Host Controller Interface driver [ 3.021553] sdhci: Copyright(c) Pierre Ossman [ 3.025397] Synopsys Designware Multimedia Card Interface Driver [ 3.031857] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.037864] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.038638] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.051284] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.073173] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.083133] vdd-1v0: supplied by regulator-dummy [ 3.088722] vdd-1v8-hs: supplied by regulator-dummy [ 3.093696] vdd-1v8-ls: supplied by regulator-dummy [ 3.098628] vdd-1v8-ao: supplied by regulator-dummy [ 3.102751] vddio-ddr-1v1: supplied by regulator-dummy [ 3.107306] vdd-rtc: supplied by regulator-dummy [ 3.109175] spmic-ldo1: supplied by regulator-dummy [ 3.110491] vdd-ao-3v3: supplied by regulator-dummy [ 3.116752] vddio-emmc-3v3: supplied by regulator-dummy [ 3.123208] spmic-ldo4: supplied by regulator-dummy [ 3.124547] vdd-usb-3v3: supplied by regulator-dummy [ 3.130905] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.137199] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.142886] spmic-ldo8: supplied by vdd-1v8-ls [ 3.144425] gpio-510 (gpio_default): hogged as output/high [ 3.145811] gpio-511 (gpio_default): hogged as output/high [ 3.148839] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.284680] max77686-rtc max77620-rtc: registered as rtc0 [ 3.285754] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.286089] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.132780] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.134201] hid: raw HID events driver (C) Jiri Kosina [ 4.135095] usbcore: registered new interface driver usbhid [ 4.135269] usbhid: USB HID core driver [ 4.137781] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.139220] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.910348] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.983786] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.247 ms) ÿá[ 4.223095] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.223792] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.224814] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.225713] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.227316] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.227969] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.228595] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.230319] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.230502] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.233276] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.239316] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.245665] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.250603] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.257701] denver_knobs_init:MTS_VERSION:55637613 [ 4.269099] t19x_cache tegra-cache: probed [ 4.272199] optee: probing for conduit method. [ 4.273072] optee: revision 3.16 (65cc2218) [ 4.274307] optee: dynamic shared memory is enabled [ 4.278013] optee: initialized driver [ 4.285760] nvpmodel: initialized successfully [ 4.286539] tegra_hv: get_hvd: not initialized yet [ 4.289840] user_ivc_mempool: hypervisor not present [ 4.296266] usbcore: registered new interface driver snd-usb-audio [ 4.302423] u32 classifier [ 4.303845] input device check on [ 4.307690] Actions configured [ 4.310963] Initializing XFRM netlink socket [ 4.315925] NET: Registered protocol family 10 [ 4.322930] Segment Routing with IPv6 [ 4.323197] NET: Registered protocol family 17 [ 4.328008] NET: Registered protocol family 15 [ 4.332241] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.346008] Bluetooth: RFCOMM socket layer initialized [ 4.350189] Bluetooth: RFCOMM ver 1.11 [ 4.354333] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.359900] Bluetooth: HIDP socket layer initialized [ 4.366077] 9pnet: Installing 9P2000 support [ 4.369591] Key type dns_resolver registered [ 4.374958] registered taskstats version 1 [ 4.378054] Loading compiled-in X.509 certificates [ 4.392872] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.394473] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.404311] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.405995] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.414261] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.422892] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.537223] tegra194-pcie 14160000.pcie: Link up [ 4.540173] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.540429] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.540614] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.540861] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.541104] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.541587] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.542021] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.555653] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.556205] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.556661] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.558252] pci 0004:01:00.0: supports D1 D2 [ 4.558441] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.570128] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.570574] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.570839] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.571419] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.571691] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.571938] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.572157] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.579463] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.587965] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.598389] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.602814] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.608765] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.616110] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.625867] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.626312] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.634283] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.642943] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.749295] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.750030] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.750271] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.750416] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.750753] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.750940] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.751424] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.751845] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.779561] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.779854] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.782110] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.783323] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.785894] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.787717] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.788910] pci 0005:00:00.0: Removing from iommu group 7 [ 5.789433] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.826495] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.854432] host1x 13e10000.host1x: initialized [ 5.856302] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.857696] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.858806] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.859636] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.860543] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.861473] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.862443] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.863291] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.864081] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.864751] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.865897] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.866717] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.876244] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.883540] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.893519] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.900162] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.910084] falcon 15340000.vic: Adding to iommu group 17 [ 5.926431] falcon 15340000.vic: initialized [ 5.927611] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.933299] falcon 15380000.nvjpg: initialized [ 5.934074] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.943323] falcon 154c0000.nvenc: initialized [ 5.943881] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.953827] falcon 15a80000.nvenc1: initialized [ 5.954533] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.966141] nvdec 15480000.nvdec: initialized [ 5.966785] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.978060] nvdec 15140000.nvdec1: initialized [ 5.978736] tsec 15500000.tsec: Adding to iommu group 18 [ 5.984652] tsec 15500000.tsec: initialized [ 5.985236] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.990629] tsec 15100000.tsecb: initialized [ 5.994845] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.021758] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.035584] gpio-374 (wifi-enable): hogged as output/high [ 6.035881] gpio-431 (camera-control-output-low): hogged as output/low [ 6.036144] gpio-432 (camera-control-output-low): hogged as output/low [ 6.037829] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.039515] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.040174] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.041943] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.047098] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.053290] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.058492] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.066518] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.073885] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.086062] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.090729] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.096586] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.105446] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.114724] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.121882] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.129605] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.135525] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.145468] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.151426] pva 16000000.pva0: Adding to iommu group 22 [ 6.179950] pva 16000000.pva0: initialized [ 6.185822] pva 16800000.pva1: Adding to iommu group 23 [ 6.197272] pva 16800000.pva1: initialized [ 6.202378] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.215714] nvdla 15880000.nvdla0: initialized [ 6.217108] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.226560] nvdla 158c0000.nvdla1: initialized [ 6.229532] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.229786] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.229837] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.230108] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.230646] tegradccommon 15200000.display-hub: dma mapping done [ 6.230842] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.231990] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.232192] tegradc 15200000.display: Adding to iommu group 26 [ 6.232556] tegradc 15210000.display: Adding to iommu group 26 [ 6.234820] tegra_cec 3960000.tegra_cec: probed [ 6.240119] tegradc 15210000.display: disp0 connected to head1->sor [ 6.240242] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.240422] tegradc 15210000.display: DT parsed successfully [ 6.240431] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.241886] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.247882] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.251741] generic_infoframe_type: 0x87 [ 6.258136] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.264938] tegradc 15200000.display: DT parsed successfully [ 6.272767] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.278538] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.285451] kfuse 3830000.kfuse: initialized [ 6.294383] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.295401] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.300658] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.306327] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.312768] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.313632] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.321133] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.325215] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.326864] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.334826] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.343848] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.349886] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.355566] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.363581] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.430814] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.436032] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.457355] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.457745] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.459369] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.467619] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.476094] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.482851] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.490449] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.497645] usb usb1: Product: xHCI Host Controller [ 6.502310] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.508600] usb usb1: SerialNumber: 3610000.xhci [ 6.514282] hub 1-0:1.0: USB hub found [ 6.517512] hub 1-0:1.0: 4 ports detected [ 6.522212] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.526834] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.534197] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.542228] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.550007] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.557251] usb usb2: Product: xHCI Host Controller [ 6.562233] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.568444] usb usb2: SerialNumber: 3610000.xhci [ 6.573839] hub 2-0:1.0: USB hub found [ 6.576882] hub 2-0:1.0: 4 ports detected [ 6.622428] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.628986] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.630297] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.630474] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.643663] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.644739] tegra194-cpufreq ccplex: probed with BWMGR [ 6.646080] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.646677] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.647197] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.648349] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.654003] tegra194-vi5 15c10000.vi: initialized [ 6.655559] tegradc 15210000.display: disp0 connected to head1->sor [ 6.656726] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.656881] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.663093] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.670231] tegradc 15210000.display: DT parsed successfully [ 6.678534] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.684130] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.690601] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.690607] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.690611] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.690672] mmc0: CQHCI version 5.10 [ 6.697205] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.697212] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.697218] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.699341] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.701308] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.701350] generic_infoframe_type: 0x87 [ 6.701417] tegradc 15200000.display: DT parsed successfully [ 6.701475] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.702265] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.702286] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.702291] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.702692] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.702699] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.702884] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.703956] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.703961] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.706174] tegradc 15200000.display: probed [ 6.734328] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.781242] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.781840] nvethernet 2490000.ethernet: Macsec not supported [ 6.836951] mmc0: Command Queue Engine enabled [ 6.841843] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.847910] mmc0: periodic cache flush enabled [ 6.847930] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.848530] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.856319] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.860722] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.865436] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.884618] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.884669] random: crng init done [ 6.888983] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.927454] Console: switching to colour frame buffer device 240x67 [ 6.928410] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.933580] tegradc 15200000.display: fb registered [ 6.933662] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.941437] tegra-se-nvhost 15810000.se: initialized [ 6.945765] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.955051] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.957100] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.957109] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.957113] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.957117] usb 1-2: Manufacturer: Generic [ 6.959200] hub 1-2:1.0: USB hub found [ 6.960239] hub 1-2:1.0: 4 ports detected [ 6.961400] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.967854] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.012939] tegra-se-nvhost 15820000.se: initialized [ 7.019026] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.024063] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.030175] tegra-se-nvhost 15830000.se: initialized [ 7.035351] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.041117] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.042469] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.047726] tegra-se-nvhost 15840000.se: initialized [ 7.056432] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.061878] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.067827] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.074446] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.075881] tegra_actmon d230000.actmon: in actmon_register()... [ 7.082107] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.082661] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.082667] Extcon AUX1(HDMI) enable [ 7.082811] tegradc 15210000.display: disp1 connected to head1->sor [ 7.082923] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.083018] tegradc 15210000.display: DT parsed successfully [ 7.083056] tegradc 15210000.display: Display dc.000000009797742c registered with id=1 [ 7.083154] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.083160] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.089718] tegradc 15210000.display: probed [ 7.095471] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.126709] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.131284] hvc_sysfs: hypervisor is not present [ 7.138927] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.138933] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.138937] usb 2-3: Manufacturer: Generic [ 7.149971] hub 2-3:1.0: USB hub found [ 7.177743] ALSA device list: [ 7.186137] hub 2-3:1.0: 4 ports detected [ 7.188898] No soundcards found. [ 7.207311] tegradc 15210000.display: fb registered [ 7.215462] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.218103] Freeing unused kernel memory: 3968K [ 7.219353] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.231949] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.232044] tegradc 15200000.display: blank - powerdown [ 7.237257] Run /init as init process [ 7.245194] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.276170] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.276177] Extcon AUX1(HDMI) disable [ 7.297181] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.297186] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.299398] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.300202] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.311694] tegradc 15200000.display: unblank [ 7.312668] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.312851] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.318778] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.320630] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.324592] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.324597] Extcon AUX1(HDMI) enable [ 7.337380] tegradc 15200000.display: sync windows ret = 246 [ 7.367480] tegradc 15210000.display: blank - powerdown [ 7.369008] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.369018] Extcon DP: HPD disabled [ 7.369023] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.369035] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.383396] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.390394] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.397665] Extcon HDMI: HPD enabled [ 7.401579] tegradc 15200000.display: hdmi: plugged [ 7.407279] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.414215] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.421854] usb 1-3: Product: Bluetooth Radio [ 7.422986] Root device found: mmcblk0p1 [ 7.426224] usb 1-3: Manufacturer: Realtek [ 7.432200] Found dev node: /dev/mmcblk0p1 [ 7.434313] usb 1-3: SerialNumber: 00e04c000001 [ 7.473437] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.478807] Rootfs mounted over mmcblk0p1 [ 7.507610] Switching from initrd to actual rootfs [ 7.655643] systemd[1]: System time before build time, advancing clock. [ 7.723895] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.728844] systemd[1]: Detected architecture arm64. [ 7.783164] systemd[1]: Set hostname to . [ 7.941910] systemd-sysv-generator[252]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.288596] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.290494] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.296063] systemd[1]: Created slice system-modprobe.slice. [ 8.300907] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.305285] systemd[1]: Created slice User and Session Slice. [ 8.308787] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.313096] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.316562] systemd[1]: Reached target User and Group Name Lookups. [ 8.319897] systemd[1]: Reached target Slices. [ 8.323149] systemd[1]: Reached target Swap. [ 8.327274] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.331058] systemd[1]: Listening on Syslog Socket. [ 8.334736] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.338268] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.342639] systemd[1]: Listening on Journal Audit Socket. [ 8.346405] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.350326] systemd[1]: Listening on Journal Socket. [ 8.354312] systemd[1]: Listening on udev Control Socket. [ 8.358000] systemd[1]: Listening on udev Kernel Socket. [ 8.366384] systemd[1]: Mounting Huge Pages File System... [ 8.376319] systemd[1]: Mounting POSIX Message Queue File System... [ 8.386358] systemd[1]: Mounting RPC Pipe File System... [ 8.395190] systemd[1]: Mounting Kernel Debug File System... [ 8.403848] systemd[1]: Mounting Kernel Trace File System... [ 8.414081] systemd[1]: Starting Journal Service... [ 8.423362] systemd[1]: Starting Set the console keyboard layout... [ 8.431763] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.435493] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.441926] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.450200] systemd[1]: Started Nameserver information manager. [ 8.455362] systemd[1]: Reached target Network (Pre). [ 8.462705] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.464594] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.472457] systemd[1]: Starting Load Kernel Modules... [ 8.480477] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.489373] systemd[1]: Starting udev Coldplug all Devices... [ 8.501514] systemd[1]: Mounted Huge Pages File System. [ 8.505340] systemd[1]: Mounted POSIX Message Queue File System. [ 8.510121] systemd[1]: Mounted RPC Pipe File System. [ 8.511210] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.511403] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.515073] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.515080] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.515090] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.515095] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.515303] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.515494] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.515652] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.515661] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.532274] systemd[1]: Mounted Kernel Debug File System. [ 8.536240] systemd[1]: Mounted Kernel Trace File System. [ 8.542432] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.547139] systemd[1]: nvfb-udev.service: Succeeded. [ 8.551360] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.562147] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.574795] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.576633] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.584299] systemd[1]: Starting Load/Save Random Seed... [ 8.592448] systemd[1]: Starting Create System Users... [ 8.616273] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.616273] [ 8.655584] systemd[1]: Finished Load/Save Random Seed. [ 8.670420] systemd[1]: Finished Create System Users. [ 8.677505] systemd[1]: Finished Load Kernel Modules. [ 8.681838] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.688133] systemd[1]: Mounting Kernel Configuration File System... [ 8.696306] systemd[1]: Started OP-TEE Client Supplicant. [ 8.704372] systemd[1]: Starting Apply Kernel Variables... [ 8.712780] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.723349] systemd[1]: Finished Set the console keyboard layout. [ 8.730088] systemd[1]: Mounted Kernel Configuration File System. [ 10.322129] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.328874] imx219 9-0010: board setup failed [ 10.330202] imx219: probe of 9-0010 failed with error -121 [ 10.346310] hot-surface-alert cooling state: 0 -> 1 [ 10.349560] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.356029] imx219 10-0010: board setup failed [ 10.357377] imx219: probe of 10-0010 failed with error -121 [ 10.453648] using random self ethernet address [ 10.461449] using random host ethernet address [ 11.966893] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.966903] Creating 1 MTD partitions on "spi6.0": [ 11.966914] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.584184] using random self ethernet address [ 12.585412] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.838926] nvidia: loading out-of-tree module taints kernel. [ 58.602848] watchdog: watchdog0: watchdog did not stop! [ 59.066099] Trying to unregister non-registered hwtime source [ 62.128093] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.129733] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä ÿâfuse initialized hwwdt initialized ÿäNon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exteÿâec initialized ÿärÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿänalÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä DT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized entering main console loop ] extras_post initialized bpmp: init complete ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.421] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.612] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.647] I> edid read success [0003.647] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.648] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.649] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.681] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 4096, height = 2160, frequency = 296703296 [0003.721] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.732] I> hdmi_enable, starting HDMI initialisation [0003.737] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.747] calling apps_init() [0003.748] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000775] Console: colour dummy device 80x25 [ 0.002196] printk: console [tty0] enabled [ 0.002258] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002292] pid_max: default: 32768 minimum: 301 [ 0.002475] LSM: Security Framework initializing [ 0.002535] Yama: becoming mindful. [ 0.002582] SELinux: Initializing. [ 0.002785] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002822] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005956] rcu: Hierarchical SRCU implementation. [ 0.006225] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007063] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007103] DTB Build time: Aug 10 2022 20:31:49 [ 0.009962] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010190] Remapping and enabling EFI services. [ 0.012179] smp: Bringing up secondary CPUs ... [ 0.041372] Detected PIPT I-cache on CPU1 [ 0.041486] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071122] Detected PIPT I-cache on CPU2 [ 0.071275] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100768] Detected PIPT I-cache on CPU3 [ 0.100908] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130547] Detected PIPT I-cache on CPU4 [ 0.130783] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160441] Detected PIPT I-cache on CPU5 [ 0.160590] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160943] smp: Brought up 1 node, 6 CPUs [ 0.161116] SMP: Total of 6 processors activated. [ 0.161190] CPU features: detected: Privileged Access Never [ 0.161213] CPU features: detected: LSE atomic instructions [ 0.161227] CPU features: detected: User Access Override [ 0.161239] CPU features: detected: 32-bit EL0 Support [ 0.161252] CPU features: detected: RAS Extension Support [ 0.161264] CPU features: detected: CRC32 instructions [ 0.161276] CPU features: detected: 32-bit EL1 Support [ 0.229944] CPU: All CPU(s) started at EL2 [ 0.235048] devtmpfs: initialized [ 0.284601] Registered cp15_barrier emulation handler [ 0.284717] Registered setend emulation handler [ 0.284737] KASLR enabled [ 0.285014] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285037] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286322] pinctrl core: initialized pinctrl subsystem [ 0.287376] SMBIOS 3.0.0 present. [ 0.287405] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.287962] NET: Registered protocol family 16 [ 0.289924] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.290424] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291126] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291186] audit: initializing netlink subsys (disabled) [ 0.291466] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.291963] thermal_sys: Registered thermal governor 'step_wise' [ 0.291970] thermal_sys: Registered thermal governor 'power_allocator' [ 0.291986] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294251] cpuidle: using governor menu [ 0.294600] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295036] ASID allocator initialised with 32768 entries [ 0.295277] Serial: AMBA PL011 UART driver [ 0.299932] Tegra reboot handler registered. [ 0.373078] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.373287] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.373498] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.373555] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.373687] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.373740] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.373893] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.373951] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.374077] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.374128] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.376608] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.376644] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.376692] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.376740] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.376773] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.376820] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.376859] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.376894] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.376922] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.376947] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.376972] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.376997] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.377025] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.377052] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.377098] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.377124] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.377166] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.377273] mc-err: mcerr ops are set to t19x [ 0.390393] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390416] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390429] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390440] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397278] ACPI: Interpreter disabled. [ 0.398540] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.399846] iommu: Default domain type: Translated [ 0.399918] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400275] SCSI subsystem initialized [ 0.400431] usbcore: registered new interface driver usbfs [ 0.400475] usbcore: registered new interface driver hub [ 0.400507] usbcore: registered new device driver usb [ 0.400925] mc: Linux media interface: v0.10 [ 0.400957] videodev: Linux video capture interface: v2.00 [ 0.401241] pps_core: LinuxPPS API ver. 1 registered [ 0.401253] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401272] PTP clock support registered [ 0.401486] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.401795] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401882] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.402567] Registered efivars operations [ 0.408323] FPGA manager framework [ 0.408422] Advanced Linux Sound Architecture Driver Initialized. [ 0.409053] Bluetooth: Core ver 2.22 [ 0.409092] NET: Registered protocol family 31 [ 0.409103] Bluetooth: HCI device and connection manager initialized [ 0.409137] Bluetooth: HCI socket layer initialized [ 0.409153] Bluetooth: L2CAP socket layer initialized [ 0.409191] Bluetooth: SCO socket layer initialized [ 0.410648] camchar: rtcpu character device driver loaded [ 0.411299] clocksource: Switched to clocksource arch_sys_counter [ 0.695734] VFS: Disk quotas dquot_6.6.0 [ 0.695818] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.696142] pnp: PnP ACPI: disabled [ 0.708448] la/ptsa driver initialized. [ 0.708572] NET: Registered protocol family 2 [ 0.708725] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.714237] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.714305] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.714605] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.715038] TCP: Hash tables configured (established 65536 bind 65536) [ 0.715139] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.715225] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.715481] NET: Registered protocol family 1 [ 0.716095] RPC: Registered named UNIX socket transport module. [ 0.716107] RPC: Registered udp transport module. [ 0.716117] RPC: Registered tcp transport module. [ 0.716125] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.716159] PCI: CLS 0 bytes, default 64 [ 0.716385] Trying to unpack rootfs image as initramfs... [ 0.896050] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.898097] Freeing initrd memory: 8196K [ 0.902315] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.902350] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.902384] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.902811] kvm [1]: IPA Size Limit: 40 bits [ 0.903450] kvm [1]: vgic interrupt IRQ9 [ 0.903950] kvm [1]: VHE mode initialized successfully [ 0.905287] Initialise system trusted keyrings [ 0.905561] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.910071] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.910758] NFS: Registering the id_resolver key type [ 0.910781] Key type id_resolver registered [ 0.910791] Key type id_legacy registered [ 0.910856] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.910873] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.910899] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.918538] NET: Registered protocol family 38 [ 0.918556] Key type asymmetric registered [ 0.918566] Asymmetric key parser 'x509' registered [ 0.918602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.918754] io scheduler mq-deadline registered [ 0.918765] io scheduler kyber registered [ 0.923129] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.925361] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.925420] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.925470] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.925519] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.925620] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.929436] scrncapt: init (heads:4 wins:6 planes:4) [ 0.929743] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.930396] EINJ: ACPI disabled. [ 0.932628] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.932648] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.932658] tegra-pmc: ### PMC reset level: L1 [ 0.932666] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.932707] tegra-pmc: PMC Prod config success [ 0.937212] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.941251] random: fast init done [ 0.941392] printk: console [ttyTCU0] enabled [ 2.494494] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.498613] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.503244] arm-smmu 10000000.iommu: stage 1 translation [ 2.508655] arm-smmu 10000000.iommu: stage 2 translation [ 2.513913] arm-smmu 10000000.iommu: nested translation [ 2.519522] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.526445] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.537013] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.539534] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.546353] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.554077] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.559401] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.564132] arm-smmu 12000000.iommu: stage 1 translation [ 2.569363] arm-smmu 12000000.iommu: stage 2 translation [ 2.575044] arm-smmu 12000000.iommu: nested translation [ 2.580215] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.587395] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.597771] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.600774] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.607076] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.614745] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.624542] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.627511] tegra_profiler: auth: init [ 2.631932] THERMAL EST: found 3 subdevs [ 2.635141] THERMAL EST num_resources: 0 [ 2.639314] [THERMAL EST subdev 0] [ 2.642340] [THERMAL EST subdev 1] [ 2.646007] [THERMAL EST subdev 2] [ 2.648992] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.655747] THERMAL EST: thz register success. [ 2.659980] THERMAL EST: end of probe, return err: 0 [ 2.664957] nvsciipc: loaded module [ 2.672123] tun: Universal TUN/TAP device driver, 1.6 [ 2.674781] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.681029] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.686316] e1000e: Intel(R) PRO/1000 Network Driver [ 2.691512] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.697335] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.702880] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.709027] PPP generic driver version 2.4.2 [ 2.713316] PPP BSD Compression module registered [ 2.717864] PPP Deflate Compression module registered [ 2.723111] PPP MPPE Compression module registered [ 2.727870] usbcore: registered new interface driver r8152 [ 2.733631] usbcore: registered new interface driver asix [ 2.738706] usbcore: registered new interface driver ax88179_178a [ 2.744848] usbcore: registered new interface driver cdc_ether [ 2.751035] usbcore: registered new interface driver net1080 [ 2.756379] usbcore: registered new interface driver cdc_subset [ 2.762717] usbcore: registered new interface driver zaurus [ 2.768118] usbcore: registered new interface driver cdc_ncm [ 2.774046] usbcore: registered new interface driver aqc111 [ 2.779508] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.785834] ohci-pci: OHCI PCI platform driver [ 2.789826] ohci-platform: OHCI generic platform driver [ 2.795835] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.802411] usbcore: registered new interface driver uas [ 2.806124] usbcore: registered new interface driver usb-storage [ 2.812534] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.818266] mousedev: PS/2 mouse device common for all mice [ 2.823511] usbcore: registered new interface driver xpad [ 2.831420] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.834249] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.841790] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.848286] i2c /dev entries driver [ 2.851929] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.857931] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.862774] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.868296] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.873510] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.879273] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.884737] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.899469] device-mapper: uevent: version 1.0.3 [ 2.899925] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.905177] cpuidle: Initializing cpuidle driver [ 2.908948] sdhci: Secure Digital Host Controller Interface driver [ 2.913603] sdhci: Copyright(c) Pierre Ossman [ 2.917955] Synopsys Designware Multimedia Card Interface Driver [ 2.923891] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.930121] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.930938] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.943396] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.966265] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.976061] vdd-1v0: supplied by regulator-dummy [ 2.981644] vdd-1v8-hs: supplied by regulator-dummy [ 2.986534] vdd-1v8-ls: supplied by regulator-dummy [ 2.991506] vdd-1v8-ao: supplied by regulator-dummy [ 2.995503] vddio-ddr-1v1: supplied by regulator-dummy [ 2.999988] vdd-rtc: supplied by regulator-dummy [ 3.001752] spmic-ldo1: supplied by regulator-dummy [ 3.002986] vdd-ao-3v3: supplied by regulator-dummy [ 3.009229] vddio-emmc-3v3: supplied by regulator-dummy [ 3.015518] spmic-ldo4: supplied by regulator-dummy [ 3.016745] vdd-usb-3v3: supplied by regulator-dummy [ 3.023158] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.029387] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.035010] spmic-ldo8: supplied by vdd-1v8-ls [ 3.036541] gpio-510 (gpio_default): hogged as output/high [ 3.037922] gpio-511 (gpio_default): hogged as output/high [ 3.040805] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.176856] max77686-rtc max77620-rtc: registered as rtc0 [ 3.178232] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.178611] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.008504] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.009844] hid: raw HID events driver (C) Jiri Kosina [ 4.010768] usbcore: registered new interface driver usbhid [ 4.010923] usbhid: USB HID core driver [ 4.013279] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.014318] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.764165] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.838653] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.297 ms) ÿá[ 4.098750] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.099468] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.100374] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.101036] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.102678] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.103451] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.104033] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.105371] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.105686] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.107630] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.114866] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.121357] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.125917] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.132387] denver_knobs_init:MTS_VERSION:55637613 [ 4.144876] t19x_cache tegra-cache: probed [ 4.147576] optee: probing for conduit method. [ 4.148374] optee: revision 3.16 (65cc2218) [ 4.149175] optee: dynamic shared memory is enabled [ 4.153618] optee: initialized driver [ 4.160996] nvpmodel: initialized successfully [ 4.161767] tegra_hv: get_hvd: not initialized yet [ 4.165938] user_ivc_mempool: hypervisor not present [ 4.171469] usbcore: registered new interface driver snd-usb-audio [ 4.177889] u32 classifier [ 4.179686] input device check on [ 4.183355] Actions configured [ 4.186803] Initializing XFRM netlink socket [ 4.191621] NET: Registered protocol family 10 [ 4.197692] Segment Routing with IPv6 [ 4.199244] NET: Registered protocol family 17 [ 4.203274] NET: Registered protocol family 15 [ 4.207944] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.221849] Bluetooth: RFCOMM socket layer initialized [ 4.226475] Bluetooth: RFCOMM ver 1.11 [ 4.230135] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.235762] Bluetooth: HIDP socket layer initialized [ 4.241929] 9pnet: Installing 9P2000 support [ 4.245156] Key type dns_resolver registered [ 4.250947] registered taskstats version 1 [ 4.253618] Loading compiled-in X.509 certificates [ 4.266883] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.269342] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.279733] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.281493] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.290375] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.298449] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.415407] tegra194-pcie 14160000.pcie: Link up [ 4.418328] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.418601] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.418832] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.419069] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.419340] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.419702] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.420138] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.433164] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.433608] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.434144] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.435944] pci 0004:01:00.0: supports D1 D2 [ 4.436309] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.447617] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.448167] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.448422] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.448861] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.449200] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.449377] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.449963] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.457458] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.465981] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.476663] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.481158] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.486267] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.493276] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.502530] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.503880] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.512334] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.521046] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.636169] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.636626] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.636878] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.637068] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.637319] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.637690] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.638137] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.638571] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.659951] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.660428] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.662178] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.663631] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.665404] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.667109] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.668172] pci 0005:00:00.0: Removing from iommu group 7 [ 5.668409] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.703532] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.728794] host1x 13e10000.host1x: initialized [ 5.730563] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.731756] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.733356] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.734032] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.735738] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.736365] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.737651] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.738318] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.739705] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.740303] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.746270] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.753451] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.763574] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.770098] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.780033] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.787429] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.797233] falcon 15340000.vic: Adding to iommu group 17 [ 5.811401] falcon 15340000.vic: initialized [ 5.812485] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.818074] falcon 15380000.nvjpg: initialized [ 5.818613] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.829632] falcon 154c0000.nvenc: initialized [ 5.830120] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.839867] falcon 15a80000.nvenc1: initialized [ 5.840437] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.852795] nvdec 15480000.nvdec: initialized [ 5.853352] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.863455] nvdec 15140000.nvdec1: initialized [ 5.864094] tsec 15500000.tsec: Adding to iommu group 18 [ 5.869867] tsec 15500000.tsec: initialized [ 5.870340] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.877185] tsec 15100000.tsecb: initialized [ 5.881107] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.910734] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.923768] gpio-374 (wifi-enable): hogged as output/high [ 5.924087] gpio-431 (camera-control-output-low): hogged as output/low [ 5.924376] gpio-432 (camera-control-output-low): hogged as output/low [ 5.926038] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.928263] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.928773] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.930317] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.933819] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.939703] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.945586] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.953738] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.961328] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.972091] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.977668] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.983138] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.992042] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.001678] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.008627] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.016306] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.022327] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.032252] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.038490] pva 16000000.pva0: Adding to iommu group 22 [ 6.064706] pva 16000000.pva0: initialized [ 6.068917] pva 16800000.pva1: Adding to iommu group 23 [ 6.080302] pva 16800000.pva1: initialized [ 6.084376] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.098666] nvdla 15880000.nvdla0: initialized [ 6.100222] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.109519] nvdla 158c0000.nvdla1: initialized [ 6.112788] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.113094] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.113437] tegradccommon 15200000.display-hub: dma mapping done [ 6.114017] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.114329] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.115042] tegradc 15200000.display: Adding to iommu group 26 [ 6.115051] tegradc 15210000.display: Adding to iommu group 26 [ 6.115500] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.124059] tegradc 15210000.display: disp0 connected to head1->sor [ 6.128880] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.134336] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.140005] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.147269] tegradc 15210000.display: DT parsed successfully [ 6.153131] tegra_cec 3960000.tegra_cec: probed [ 6.158700] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.164612] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.171625] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.179664] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.183546] generic_infoframe_type: 0x87 [ 6.190614] kfuse 3830000.kfuse: initialized [ 6.193814] tegradc 15200000.display: DT parsed successfully [ 6.199180] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.204359] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.210402] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.211129] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.223069] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.226244] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.230798] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.230808] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.231806] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.240860] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.248309] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.257343] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.266149] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.271515] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.279679] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.283511] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.292175] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.315160] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.340519] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.346106] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.354696] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.363130] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.369646] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.377387] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.384672] usb usb1: Product: xHCI Host Controller [ 6.389337] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.395538] usb usb1: SerialNumber: 3610000.xhci [ 6.401181] hub 1-0:1.0: USB hub found [ 6.404306] hub 1-0:1.0: 4 ports detected [ 6.409345] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.413468] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.421334] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.429145] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.436658] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.444133] usb usb2: Product: xHCI Host Controller [ 6.448838] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.455049] usb usb2: SerialNumber: 3610000.xhci [ 6.460868] hub 2-0:1.0: USB hub found [ 6.463618] hub 2-0:1.0: 4 ports detected [ 6.491173] random: crng init done [ 6.508080] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.514194] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.515884] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.516095] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.529599] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.530685] tegra194-cpufreq ccplex: probed with BWMGR [ 6.532074] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.532696] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.533190] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.534369] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.541188] mmc0: CQHCI version 5.10 [ 6.543639] tegra194-vi5 15c10000.vi: initialized [ 6.545389] tegradc 15210000.display: disp0 connected to head1->sor [ 6.546605] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.550968] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.557240] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.564100] tegradc 15210000.display: DT parsed successfully [ 6.570605] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.572298] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.577965] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.578048] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.585413] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.585418] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.585423] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.591361] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.592269] generic_infoframe_type: 0x87 [ 6.599676] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.599684] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.606484] tegradc 15200000.display: DT parsed successfully [ 6.614561] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.619670] tegradc 15200000.display: Display dc.00000000f7f9a4a7 registered with id=0 [ 6.633926] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.636699] nvethernet 2490000.ethernet: Macsec not supported [ 6.671328] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.692300] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.700495] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.700522] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.708775] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.717667] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.722450] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.728586] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.734791] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.741930] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.753869] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.760572] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.766731] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.774839] tegra-se-nvhost 15810000.se: initialized [ 6.783318] tegradc 15200000.display: probed [ 6.784958] mmc0: Command Queue Engine enabled [ 6.784963] mmc0: periodic cache flush enabled [ 6.784976] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.785401] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.785568] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.789508] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.791006] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.832271] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.838748] tegra-se-nvhost 15820000.se: initialized [ 6.844755] Console: switching to colour frame buffer device 240x67 [ 6.845379] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.848965] tegradc 15200000.display: fb registered [ 6.849049] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.850852] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.850858] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.850863] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.850866] usb 1-2: Manufacturer: Generic [ 6.852873] hub 1-2:1.0: USB hub found [ 6.854202] hub 1-2:1.0: 4 ports detected [ 6.855861] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.860771] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.886105] tegra-se-nvhost 15830000.se: initialized [ 6.890463] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.895335] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.927900] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.934387] tegra-se-nvhost 15840000.se: initialized [ 6.940145] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.946294] tegra_actmon d230000.actmon: in actmon_register()... [ 6.950813] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.956181] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.964332] hvc_sysfs: hypervisor is not present [ 6.967310] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.988299] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.996481] ALSA device list: [ 6.996577] No soundcards found. [ 6.997518] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.998851] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.007654] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.013985] Extcon AUX1(HDMI) enable [ 7.017606] tegradc 15210000.display: disp1 connected to head1->sor [ 7.023859] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.025102] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.031318] tegradc 15210000.display: DT parsed successfully [ 7.039283] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.045006] tegradc 15210000.display: Display dc.00000000d45c662e registered with id=1 [ 7.052309] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.060672] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.064990] usb 2-3: Manufacturer: Generic [ 7.075563] hub 2-3:1.0: USB hub found [ 7.077410] hub 2-3:1.0: 4 ports detected [ 7.079511] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.086137] tegradc 15210000.display: probed [ 7.094239] tegradc 15210000.display: fb registered [ 7.102400] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.106465] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.107742] Freeing unused kernel memory: 3968K [ 7.114258] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.124339] tegradc 15210000.display: blank - powerdown [ 7.129397] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.135452] Run /init as init process [ 7.137272] Extcon DP: HPD disabled [ 7.143345] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.144784] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.144819] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.157741] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.167341] tegra_cec 3960000.tegra_cec: physical address: 10:00. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.176858] tegradc 15200000.display: blank - powerdown [ 7.217708] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.217712] Extcon AUX1(HDMI) disable [ 7.231914] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.231919] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.241004] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.241920] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.253160] tegradc 15200000.display: unblank [ 7.254270] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.254467] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.260728] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.262607] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.266596] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.266600] Extcon AUX1(HDMI) enable [ 7.279359] tegradc 15200000.display: sync windows ret = 246 [ 7.303243] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.303248] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.303252] usb 1-3: Product: Bluetooth Radio [ 7.303256] usb 1-3: Manufacturer: Realtek [ 7.303260] usb 1-3: SerialNumber: 00e04c000001 [ 7.313709] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.315671] Extcon HDMI: HPD enabled [ 7.319427] tegradc 15200000.display: hdmi: plugged [ 7.365366] Root device found: mmcblk0p1 [ 7.368736] Found dev node: /dev/mmcblk0p1 [ 7.404351] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.409616] Rootfs mounted over mmcblk0p1 [ 7.444728] Switching from initrd to actual rootfs [ 7.586286] systemd[1]: System time before build time, advancing clock. [ 7.655631] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.660452] systemd[1]: Detected architecture arm64. [ 7.707550] systemd[1]: Set hostname to . [ 7.868466] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.222777] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.224636] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.230203] systemd[1]: Created slice system-modprobe.slice. [ 8.234984] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.239235] systemd[1]: Created slice User and Session Slice. [ 8.242641] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.246926] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.250284] systemd[1]: Reached target User and Group Name Lookups. [ 8.253503] systemd[1]: Reached target Slices. [ 8.256634] systemd[1]: Reached target Swap. [ 8.260685] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.264383] systemd[1]: Listening on Syslog Socket. [ 8.267949] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.271372] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.275593] systemd[1]: Listening on Journal Audit Socket. [ 8.279251] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.283090] systemd[1]: Listening on Journal Socket. [ 8.286798] systemd[1]: Listening on udev Control Socket. [ 8.290318] systemd[1]: Listening on udev Kernel Socket. [ 8.298447] systemd[1]: Mounting Huge Pages File System... [ 8.306529] systemd[1]: Mounting POSIX Message Queue File System... [ 8.317086] systemd[1]: Mounting RPC Pipe File System... [ 8.325417] systemd[1]: Mounting Kernel Debug File System... [ 8.333625] systemd[1]: Mounting Kernel Trace File System... [ 8.344002] systemd[1]: Starting Journal Service... [ 8.353580] systemd[1]: Starting Set the console keyboard layout... [ 8.362561] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.368932] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.375635] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.384423] systemd[1]: Started Nameserver information manager. [ 8.389659] systemd[1]: Reached target Network (Pre). [ 8.397187] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.399035] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.407206] systemd[1]: Starting Load Kernel Modules... [ 8.414879] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.423889] systemd[1]: Starting udev Coldplug all Devices... [ 8.433898] systemd[1]: Mounted Huge Pages File System. [ 8.437783] systemd[1]: Mounted POSIX Message Queue File System. [ 8.441419] systemd[1]: Mounted RPC Pipe File System. [ 8.445027] systemd[1]: Mounted Kernel Debug File System. [ 8.448795] systemd[1]: Mounted Kernel Trace File System. [ 8.449511] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.452098] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.452103] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.452113] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.452117] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.452514] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.452573] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.452709] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.452715] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.456896] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.478752] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.483572] systemd[1]: nvfb-udev.service: Succeeded. [ 8.488575] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.498143] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.511159] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.513737] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.520267] systemd[1]: Starting Load/Save Random Seed... [ 8.529616] systemd[1]: Starting Create System Users... [ 8.541731] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.541731] [ 8.578084] systemd[1]: Finished Load Kernel Modules. [ 8.583890] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.590408] systemd[1]: Mounting Kernel Configuration File System... [ 8.598288] systemd[1]: Started OP-TEE Client Supplicant. [ 8.606230] systemd[1]: Starting Apply Kernel Variables... [ 8.616380] systemd[1]: Finished Set the console keyboard layout. [ 8.622951] systemd[1]: Finished Load/Save Random Seed. [ 8.628221] systemd[1]: Mounted Kernel Configuration File System. [ 10.210390] using random self ethernet address [ 10.211735] using random host ethernet address [ 10.268884] hot-surface-alert cooling state: 0 -> 1 [ 10.404440] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.419427] imx219 9-0010: board setup failed [ 10.420795] imx219: probe of 9-0010 failed with error -121 [ 10.433013] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.439530] imx219 10-0010: board setup failed [ 10.440802] imx219: probe of 10-0010 failed with error -121 [ 11.726713] using random self ethernet address [ 11.728059] using random host ethernet address [ 11.912697] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.913859] Creating 1 MTD partitions on "spi6.0": [ 11.914946] 0x000000000000-0x000002000000 : "Whole_flash0" Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 37.796969] nvidia: loading out-of-tree module taints kernel. [ 58.321048] watchdog: watchdog0: watchdog did not stop! [ 58.764046] Trying to unregister non-registered hwtime source [ 61.830165] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.831737] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERRÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.045] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.086] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.325] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.481] I> register 'maxim' power off handle [0003.483] I> virtual i2c enabled [0003.483] I> registered 'maxim,max20024' pmic [0003.484] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> hdmi cable connected [0003.600] W> set volts not configured for 'vdd-1v0' [0003.604] W> set volts not configured for 'vdd-1v8-hs' [0003.604] I> retrieved tmds range from prod_list_hdmi_soc [0003.609] E> invalid display type [0003.610] E> cannot find any other nvdisp nodes [0003.627] I> edid read success [0003.639] I> edid read success [0003.639] I> width = 640, height = 480, frequency = 25174825 [0003.640] I> width = 1920, height = 1080, frequency = 148500000 [0003.640] I> width = 1280, height = 768, frequency = 79500000 [0003.640] I> width = 1360, height = 768, frequency = 85500000 [0003.641] I> width = 720, height = 480, frequency = 26973026 [0003.645] I> width = 720, height = 576, frequency = 26973026 [0003.650] I> width = 1280, height = 720, frequency = 74175824 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1920, height = 1080, frequency = 148351648 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 720, height = 480, frequency = 26973026 [0003.679] I> width = 720, height = 576, frequency = 26973026 [0003.684] I> width = 3840, height = 2160, frequency = 296703296 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 4096, height = 2160, frequency = 296703296 [0003.713] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.724] I> hdmi_enable, starting HDMI initialisation [0003.729] I> hdmi_enable, HDMI initialisation complete [0003.739] initializing target [0003.739] calling apps_init() [0003.740] starting app kernel_boot_app [0003.741] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000679] Console: colour dummy device 80x25 [ 0.002158] printk: console [tty0] enabled [ 0.002217] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002251] pid_max: default: 32768 minimum: 301 [ 0.002420] LSM: Security Framework initializing [ 0.002481] Yama: becoming mindful. [ 0.002529] SELinux: Initializing. [ 0.002684] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002722] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005686] rcu: Hierarchical SRCU implementation. [ 0.005994] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006682] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006730] DTB Build time: Aug 10 2022 20:31:49 [ 0.009474] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009770] Remapping and enabling EFI services. [ 0.012105] smp: Bringing up secondary CPUs ... [ 0.041474] Detected PIPT I-cache on CPU1 [ 0.041572] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074587] Detected PIPT I-cache on CPU2 [ 0.074739] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104361] Detected PIPT I-cache on CPU3 [ 0.104571] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134308] Detected PIPT I-cache on CPU4 [ 0.134477] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164247] Detected PIPT I-cache on CPU5 [ 0.164348] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164696] smp: Brought up 1 node, 6 CPUs [ 0.164919] SMP: Total of 6 processors activated. [ 0.165006] CPU features: detected: Privileged Access Never [ 0.165029] CPU features: detected: LSE atomic instructions [ 0.165042] CPU features: detected: User Access Override [ 0.165055] CPU features: detected: 32-bit EL0 Support [ 0.165068] CPU features: detected: RAS Extension Support [ 0.165080] CPU features: detected: CRC32 instructions [ 0.165093] CPU features: detected: 32-bit EL1 Support [ 0.233068] CPU: All CPU(s) started at EL2 [ 0.239387] devtmpfs: initialized [ 0.288123] Registered cp15_barrier emulation handler [ 0.288217] Registered setend emulation handler [ 0.288233] KASLR enabled [ 0.288513] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288541] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289778] pinctrl core: initialized pinctrl subsystem [ 0.290713] SMBIOS 3.0.0 present. [ 0.290742] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291365] NET: Registered protocol family 16 [ 0.293425] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293915] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294606] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294667] audit: initializing netlink subsys (disabled) [ 0.294958] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.295364] thermal_sys: Registered thermal governor 'step_wise' [ 0.295371] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295385] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298724] cpuidle: using governor menu [ 0.299079] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299489] ASID allocator initialised with 32768 entries [ 0.299731] Serial: AMBA PL011 UART driver [ 0.303209] Tegra reboot handler registered. [ 0.375809] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375976] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.376181] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376227] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376360] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376406] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376559] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.376619] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376768] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376815] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379053] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379089] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.379120] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379150] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379181] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379211] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379248] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379288] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379318] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379345] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379372] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379398] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379426] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379452] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379479] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379505] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379531] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.379623] mc-err: mcerr ops are set to t19x [ 0.391712] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391758] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.391771] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391783] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399254] ACPI: Interpreter disabled. [ 0.400324] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.401679] iommu: Default domain type: Translated [ 0.401753] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.402166] SCSI subsystem initialized [ 0.402338] usbcore: registered new interface driver usbfs [ 0.402381] usbcore: registered new interface driver hub [ 0.402430] usbcore: registered new device driver usb [ 0.402807] mc: Linux media interface: v0.10 [ 0.402834] videodev: Linux video capture interface: v2.00 [ 0.403130] pps_core: LinuxPPS API ver. 1 registered [ 0.403143] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403164] PTP clock support registered [ 0.403369] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.403664] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.403749] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.404354] Registered efivars operations [ 0.410159] FPGA manager framework [ 0.410267] Advanced Linux Sound Architecture Driver Initialized. [ 0.410828] Bluetooth: Core ver 2.22 [ 0.410869] NET: Registered protocol family 31 [ 0.410881] Bluetooth: HCI device and connection manager initialized [ 0.410896] Bluetooth: HCI socket layer initialized [ 0.410911] Bluetooth: L2CAP socket layer initialized [ 0.410932] Bluetooth: SCO socket layer initialized [ 0.413024] camchar: rtcpu character device driver loaded [ 0.414072] clocksource: Switched to clocksource arch_sys_counter [ 0.856516] VFS: Disk quotas dquot_6.6.0 [ 0.856601] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.857076] pnp: PnP ACPI: disabled [ 0.872012] la/ptsa driver initialized. [ 0.872217] NET: Registered protocol family 2 [ 0.872444] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.880628] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.880816] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.881181] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.881810] TCP: Hash tables configured (established 65536 bind 65536) [ 0.881965] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.882159] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.882439] NET: Registered protocol family 1 [ 0.883114] RPC: Registered named UNIX socket transport module. [ 0.883138] RPC: Registered udp transport module. [ 0.883150] RPC: Registered tcp transport module. [ 0.883161] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.883193] PCI: CLS 0 bytes, default 64 [ 0.883452] Trying to unpack rootfs image as initramfs... [ 1.070050] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.072191] Freeing initrd memory: 8196K [ 1.076252] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.076291] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.076333] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.076725] kvm [1]: IPA Size Limit: 40 bits [ 1.077218] kvm [1]: vgic interrupt IRQ9 [ 1.077825] kvm [1]: VHE mode initialized successfully [ 1.079437] Initialise system trusted keyrings [ 1.079766] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.085672] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.086617] NFS: Registering the id_resolver key type [ 1.086661] Key type id_resolver registered [ 1.086680] Key type id_legacy registered [ 1.086763] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.086791] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.086845] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.096735] NET: Registered protocol family 38 [ 1.096786] Key type asymmetric registered [ 1.096804] Asymmetric key parser 'x509' registered [ 1.096882] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.097133] io scheduler mq-deadline registered [ 1.097153] io scheduler kyber registered [ 1.103095] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.106209] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.106296] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.106370] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.106438] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.106506] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.112171] scrncapt: init (heads:4 wins:6 planes:4) [ 1.112546] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.113555] EINJ: ACPI disabled. [ 1.116958] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.116985] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.116999] tegra-pmc: ### PMC reset level: L1 [ 1.117012] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.117086] tegra-pmc: PMC Prod config success [ 1.122299] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.140809] random: fast init done [ 1.150775] printk: console [ttyTCU0] enabled [ 2.679666] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.684271] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.689055] arm-smmu 10000000.iommu: stage 1 translation [ 2.694557] arm-smmu 10000000.iommu: stage 2 translation [ 2.699813] arm-smmu 10000000.iommu: nested translation [ 2.705413] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.712611] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.721870] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.725464] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.732270] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.739586] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.745322] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.750067] arm-smmu 12000000.iommu: stage 1 translation [ 2.755567] arm-smmu 12000000.iommu: stage 2 translation [ 2.760731] arm-smmu 12000000.iommu: nested translation [ 2.766423] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.773582] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.782873] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.786454] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.793266] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.800623] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.810352] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.813649] tegra_profiler: auth: init [ 2.817872] THERMAL EST: found 3 subdevs [ 2.821358] THERMAL EST num_resources: 0 [ 2.825193] [THERMAL EST subdev 0] [ 2.828516] [THERMAL EST subdev 1] [ 2.831673] [THERMAL EST subdev 2] [ 2.835173] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.841342] THERMAL EST: thz register success. [ 2.845608] THERMAL EST: end of probe, return err: 0 [ 2.850904] nvsciipc: loaded module [ 2.857236] tun: Universal TUN/TAP device driver, 1.6 [ 2.860302] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.866695] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.872246] e1000e: Intel(R) PRO/1000 Network Driver [ 2.877429] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.883536] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.888550] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.895033] PPP generic driver version 2.4.2 [ 2.899253] PPP BSD Compression module registered [ 2.903531] PPP Deflate Compression module registered [ 2.909032] PPP MPPE Compression module registered [ 2.914076] usbcore: registered new interface driver r8152 [ 2.919304] usbcore: registered new interface driver asix [ 2.924623] usbcore: registered new interface driver ax88179_178a [ 2.930999] usbcore: registered new interface driver cdc_ether [ 2.936948] usbcore: registered new interface driver net1080 [ 2.942289] usbcore: registered new interface driver cdc_subset [ 2.948346] usbcore: registered new interface driver zaurus [ 2.954029] usbcore: registered new interface driver cdc_ncm [ 2.959972] usbcore: registered new interface driver aqc111 [ 2.965576] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.971707] ohci-pci: OHCI PCI platform driver [ 2.975998] ohci-platform: OHCI generic platform driver [ 2.981693] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.987966] usbcore: registered new interface driver uas [ 2.992279] usbcore: registered new interface driver usb-storage [ 2.998333] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.004294] mousedev: PS/2 mouse device common for all mice [ 3.009167] usbcore: registered new interface driver xpad [ 3.017246] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.019936] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.027720] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.034425] i2c /dev entries driver [ 3.037807] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.043609] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.048649] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.054084] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.059409] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.064917] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.070313] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.082977] device-mapper: uevent: version 1.0.3 [ 3.083377] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.090510] cpuidle: Initializing cpuidle driver [ 3.094740] sdhci: Secure Digital Host Controller Interface driver [ 3.099783] sdhci: Copyright(c) Pierre Ossman [ 3.103627] Synopsys Designware Multimedia Card Interface Driver [ 3.109771] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.115993] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.116599] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.129094] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.146746] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.155587] vdd-1v0: supplied by regulator-dummy [ 3.160957] vdd-1v8-hs: supplied by regulator-dummy [ 3.165670] vdd-1v8-ls: supplied by regulator-dummy [ 3.170276] vdd-1v8-ao: supplied by regulator-dummy [ 3.174102] vddio-ddr-1v1: supplied by regulator-dummy [ 3.178348] vdd-rtc: supplied by regulator-dummy [ 3.179920] spmic-ldo1: supplied by regulator-dummy [ 3.181044] vdd-ao-3v3: supplied by regulator-dummy [ 3.187112] vddio-emmc-3v3: supplied by regulator-dummy [ 3.193187] spmic-ldo4: supplied by regulator-dummy [ 3.194315] vdd-usb-3v3: supplied by regulator-dummy [ 3.200907] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.206924] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.212307] spmic-ldo8: supplied by vdd-1v8-ls [ 3.213630] gpio-510 (gpio_default): hogged as output/high [ 3.215781] gpio-511 (gpio_default): hogged as output/high [ 3.222857] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.360967] max77686-rtc max77620-rtc: registered as rtc0 [ 3.361914] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.362211] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.059738] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.060796] hid: raw HID events driver (C) Jiri Kosina [ 4.061451] usbcore: registered new interface driver usbhid [ 4.061596] usbhid: USB HID core driver [ 4.063293] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.064473] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.056904] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.132425] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.332 ms) ÿá[ 4.149627] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.150208] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.151140] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.151960] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.153630] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.154376] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.155045] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.156365] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.156611] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.158773] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.166275] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.172911] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.177827] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.184120] denver_knobs_init:MTS_VERSION:55637613 [ 4.196436] t19x_cache tegra-cache: probed [ 4.200564] optee: probing for conduit method. [ 4.201446] optee: revision 3.16 (65cc2218) [ 4.202480] optee: dynamic shared memory is enabled [ 4.204583] optee: initialized driver [ 4.211377] nvpmodel: initialized successfully [ 4.212378] tegra_hv: get_hvd: not initialized yet [ 4.217097] user_ivc_mempool: hypervisor not present [ 4.222908] usbcore: registered new interface driver snd-usb-audio [ 4.229299] u32 classifier [ 4.230578] input device check on [ 4.234243] Actions configured [ 4.238228] Initializing XFRM netlink socket [ 4.243065] NET: Registered protocol family 10 [ 4.249018] Segment Routing with IPv6 [ 4.250264] NET: Registered protocol family 17 [ 4.254688] NET: Registered protocol family 15 [ 4.259197] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.272532] Bluetooth: RFCOMM socket layer initialized [ 4.277081] Bluetooth: RFCOMM ver 1.11 [ 4.281291] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.286855] Bluetooth: HIDP socket layer initialized [ 4.293207] 9pnet: Installing 9P2000 support [ 4.296354] Key type dns_resolver registered [ 4.302202] registered taskstats version 1 [ 4.304736] Loading compiled-in X.509 certificates [ 4.318546] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.320450] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.330395] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.332635] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.341482] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.349600] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.466231] tegra194-pcie 14160000.pcie: Link up [ 4.469189] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.469415] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.469547] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.469814] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.470036] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.470482] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.470973] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.482669] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.483172] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.483590] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.485203] pci 0004:01:00.0: supports D1 D2 [ 4.485368] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.497380] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.497830] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.498279] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.498758] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.499090] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.499363] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.501004] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.508524] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.516693] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.527316] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.532184] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.537034] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.544151] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.553855] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.554736] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.563417] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.571714] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.686973] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.687616] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.687796] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.687947] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.688231] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.688463] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.688875] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.689345] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.709665] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.710535] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.712635] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.714036] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.715919] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.717557] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.718590] pci 0005:00:00.0: Removing from iommu group 7 [ 5.718873] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.755713] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.779091] host1x 13e10000.host1x: initialized [ 5.781029] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.781951] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.783554] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.784310] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.785673] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.786673] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.787827] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.788538] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.789447] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.790275] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.797194] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.803913] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.814229] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.821072] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.830937] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.837778] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.847671] falcon 15340000.vic: Adding to iommu group 17 [ 5.862658] falcon 15340000.vic: initialized [ 5.863724] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.869581] falcon 15380000.nvjpg: initialized [ 5.870359] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.881055] falcon 154c0000.nvenc: initialized [ 5.881746] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.891677] falcon 15a80000.nvenc1: initialized [ 5.892442] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.904501] nvdec 15480000.nvdec: initialized [ 5.905075] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.914818] nvdec 15140000.nvdec1: initialized [ 5.915403] tsec 15500000.tsec: Adding to iommu group 18 [ 5.921074] tsec 15500000.tsec: initialized [ 5.921703] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.928640] tsec 15100000.tsecb: initialized [ 5.932765] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.960481] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.974376] gpio-374 (wifi-enable): hogged as output/high [ 5.974749] gpio-431 (camera-control-output-low): hogged as output/low [ 5.975022] gpio-432 (camera-control-output-low): hogged as output/low [ 5.976896] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.979278] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.979799] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.981286] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.984316] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.990391] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.996031] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.004685] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.011695] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.022991] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.028370] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.034276] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.043122] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.052262] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.059745] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.066917] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.073361] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.083087] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.089257] pva 16000000.pva0: Adding to iommu group 22 [ 6.117498] pva 16000000.pva0: initialized [ 6.122988] pva 16800000.pva1: Adding to iommu group 23 [ 6.135314] pva 16800000.pva1: initialized [ 6.139942] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.154524] nvdla 15880000.nvdla0: initialized [ 6.156067] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.165417] nvdla 158c0000.nvdla1: initialized [ 6.169470] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.169501] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.169539] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.169799] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.169916] tegradccommon 15200000.display-hub: dma mapping done [ 6.170315] tegradc 15200000.display: Adding to iommu group 26 [ 6.171438] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.173776] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.178975] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.179710] tegradc 15210000.display: Adding to iommu group 26 [ 6.179956] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.180264] generic_infoframe_type: 0x87 [ 6.180373] tegradc 15200000.display: DT parsed successfully [ 6.180513] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.184288] tegra_cec 3960000.tegra_cec: probed [ 6.184506] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.185549] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.192677] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.196794] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.196802] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.198487] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.201212] kfuse 3830000.kfuse: initialized [ 6.206239] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.208228] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.215202] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.223327] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.227424] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.233754] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.241073] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.250615] tegradc 15210000.display: disp0 connected to head1->sor [ 6.257435] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.262442] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.268141] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.272920] tegradc 15210000.display: DT parsed successfully [ 6.284292] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.289692] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.298012] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.373900] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.394185] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.394610] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.396918] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.405471] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.413992] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.420514] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.427789] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.435102] usb usb1: Product: xHCI Host Controller [ 6.440309] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.446571] usb usb1: SerialNumber: 3610000.xhci [ 6.452691] hub 1-0:1.0: USB hub found [ 6.454914] hub 1-0:1.0: 4 ports detected [ 6.459556] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.464487] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.471842] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.479806] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.487693] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.494996] usb usb2: Product: xHCI Host Controller [ 6.499642] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.505897] usb usb2: SerialNumber: 3610000.xhci [ 6.511673] hub 2-0:1.0: USB hub found [ 6.514649] hub 2-0:1.0: 4 ports detected [ 6.560455] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.567117] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.568686] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.568883] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.581759] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.582840] tegra194-cpufreq ccplex: probed with BWMGR [ 6.584200] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.584836] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.585321] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.586616] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.594150] tegra194-vi5 15c10000.vi: initialized [ 6.595749] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.595985] generic_infoframe_type: 0x87 [ 6.596555] mmc0: CQHCI version 5.10 [ 6.598521] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.598739] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.598760] tegradc 15200000.display: DT parsed successfully [ 6.598794] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.599429] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.599435] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.599439] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.599873] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.599880] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.600090] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.601243] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.601248] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.603662] tegradc 15200000.display: probed [ 6.608312] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.608324] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.608330] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.608336] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.614139] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.642098] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.646668] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.718151] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.723728] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.738549] mmc0: Command Queue Engine enabled [ 6.745780] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.751447] mmc0: periodic cache flush enabled [ 6.751463] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.763585] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.770168] nvethernet 2490000.ethernet: Macsec not supported [ 6.791482] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.791768] Console: switching to colour frame buffer device 240x67 [ 6.804756] tegradc 15200000.display: fb registered [ 6.809833] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.816021] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.816862] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.824771] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.829809] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.835531] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.848728] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.850231] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.856053] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.870980] tegra-se-nvhost 15810000.se: initialized [ 6.875767] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.881236] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.887857] tegra-se-nvhost 15820000.se: initialized [ 6.893685] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.898427] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.899769] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.904862] tegra-se-nvhost 15830000.se: initialized [ 6.909023] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.909030] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.909035] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.909041] usb 1-2: Manufacturer: Generic [ 6.911031] hub 1-2:1.0: USB hub found [ 6.912103] hub 1-2:1.0: 4 ports detected [ 6.914433] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.919219] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.926328] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.934169] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.938823] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.943158] tegra-se-nvhost 15840000.se: initialized [ 6.946568] Extcon AUX1(HDMI) enable [ 6.946730] tegradc 15210000.display: disp1 connected to head1->sor [ 6.952046] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.958495] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.965984] tegra_actmon d230000.actmon: in actmon_register()... [ 6.971956] tegradc 15210000.display: DT parsed successfully [ 6.978362] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.985480] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.991121] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.994011] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.000956] hvc_sysfs: hypervisor is not present [ 7.006517] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.021524] random: crng init done [ 7.068266] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.090784] ALSA device list: [ 7.090881] No soundcards found. [ 7.097893] tegradc 15210000.display: probed [ 7.098252] tegradc 15210000.display: fb registered [ 7.101705] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.101918] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.105485] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.106207] Freeing unused kernel memory: 3968K [ 7.111955] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.123576] tegradc 15210000.display: blank - powerdown [ 7.123600] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.123609] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.128760] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.128763] Extcon DP: HPD disabled [ 7.128771] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.136076] usb 2-3: Manufacturer: Generic [ 7.140743] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.140749] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.149458] Run /init as init process [ 7.163710] hub 2-3:1.0: USB hub found ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.183944] tegradc 15200000.display: blank - powerdown [ 7.185769] hub 2-3:1.0: 4 ports detected [ 7.202132] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.233618] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.233622] Extcon AUX1(HDMI) disable [ 7.238115] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.257012] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.257862] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.266730] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.266736] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.268788] tegradc 15200000.display: unblank [ 7.269830] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.270026] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.275905] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.277764] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.281767] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.281770] Extcon AUX1(HDMI) enable [ 7.294529] tegradc 15200000.display: sync windows ret = 246 [ 7.325974] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.327474] Extcon HDMI: HPD enabled [ 7.328814] tegradc 15200000.display: hdmi: plugged [ 7.377197] Root device found: mmcblk0p1 [ 7.380671] Found dev node: /dev/mmcblk0p1 [ 7.395334] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.396844] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.398285] usb 1-3: Product: Bluetooth Radio [ 7.399608] usb 1-3: Manufacturer: Realtek [ 7.400924] usb 1-3: SerialNumber: 00e04c000001 [ 7.416831] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.422231] Rootfs mounted over mmcblk0p1 [ 7.465095] Switching from initrd to actual rootfs [ 7.635644] systemd[1]: System time before build time, advancing clock. [ 7.704617] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.709526] systemd[1]: Detected architecture arm64. [ 7.756860] systemd[1]: Set hostname to . [ 7.922450] systemd-sysv-generator[252]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.272916] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.274696] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.280520] systemd[1]: Created slice system-modprobe.slice. [ 8.285301] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.289589] systemd[1]: Created slice User and Session Slice. [ 8.293054] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.297266] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.300673] systemd[1]: Reached target User and Group Name Lookups. [ 8.304050] systemd[1]: Reached target Slices. [ 8.307194] systemd[1]: Reached target Swap. [ 8.311262] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.314952] systemd[1]: Listening on Syslog Socket. [ 8.318544] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.321928] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.326232] systemd[1]: Listening on Journal Audit Socket. [ 8.329813] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.333647] systemd[1]: Listening on Journal Socket. [ 8.337353] systemd[1]: Listening on udev Control Socket. [ 8.342212] systemd[1]: Listening on udev Kernel Socket. [ 8.352349] systemd[1]: Mounting Huge Pages File System... [ 8.361011] systemd[1]: Mounting POSIX Message Queue File System... [ 8.369257] systemd[1]: Mounting RPC Pipe File System... [ 8.377632] systemd[1]: Mounting Kernel Debug File System... [ 8.386397] systemd[1]: Mounting Kernel Trace File System... [ 8.396491] systemd[1]: Starting Journal Service... [ 8.405644] systemd[1]: Starting Set the console keyboard layout... [ 8.413960] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.417624] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.424297] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.432606] systemd[1]: Started Nameserver information manager. [ 8.437427] systemd[1]: Reached target Network (Pre). [ 8.446041] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.448028] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.454331] systemd[1]: Starting Load Kernel Modules... [ 8.462265] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.471513] systemd[1]: Starting udev Coldplug all Devices... [ 8.481571] systemd[1]: Mounted Huge Pages File System. [ 8.485398] systemd[1]: Mounted POSIX Message Queue File System. [ 8.489412] systemd[1]: Mounted RPC Pipe File System. [ 8.490538] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.496374] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.497332] systemd[1]: Mounted Kernel Debug File System. [ 8.498740] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.500918] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.500930] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.500935] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.501197] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.506245] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.508607] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.508629] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.513833] systemd[1]: Mounted Kernel Trace File System. [ 8.520183] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.528000] systemd[1]: nvfb-udev.service: Succeeded. [ 8.532197] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.544229] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.549394] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.551664] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.565896] systemd[1]: Starting Load/Save Random Seed... [ 8.575107] systemd[1]: Starting Create System Users... [ 8.621009] systemd[1]: Finished Load/Save Random Seed. [ 8.621028] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.621028] [ 8.636299] systemd[1]: Finished Create System Users. [ 8.644369] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.651666] systemd[1]: Finished Load Kernel Modules. [ 8.656129] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.662560] systemd[1]: Mounting Kernel Configuration File System... [ 8.671533] systemd[1]: Started OP-TEE Client Supplicant. [ 8.680238] systemd[1]: Starting Apply Kernel Variables... [ 8.690721] systemd[1]: Finished Set the console keyboard layout. [ 8.694912] systemd[1]: Mounted Kernel Configuration File System. [ 8.711713] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.716339] systemd[1]: Reached target Local File Systems (Pre). [ 8.719552] systemd[1]: Reached target Local File Systems. [ 8.722852] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 10.030443] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.035636] imx219 9-0010: board setup failed [ 10.035755] imx219: probe of 9-0010 failed with error -121 [ 10.048293] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.054814] imx219 10-0010: board setup failed [ 10.054932] imx219: probe of 10-0010 failed with error -121 [ 10.214459] hot-surface-alert cooling state: 0 -> 1 [ 11.022716] using random self ethernet address [ 11.032010] using random host ethernet address [ 11.782750] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.784502] Creating 1 MTD partitions on "spi6.0": [ 11.786174] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.492076] using random self ethernet address [ 12.493624] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.850543] nvidia: loading out-of-tree module taints kernel. [ 58.275830] watchdog: watchdog0: watchdog did not stop! [ 58.724100] Trying to unregister non-registered hwtime source [ 61.781511] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.783641] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gòÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized pm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.614] W> set volts not configured for 'vdd-1v8-hs' [0003.615] I> retrieved tmds range from prod_list_hdmi_soc [0003.623] E> invalid display type [0003.624] E> cannot find any other nvdisp nodes [0003.641] I> edid read success [0003.654] I> edid read success [0003.654] I> width = 640, height = 480, frequency = 25174825 [0003.654] I> width = 1920, height = 1080, frequency = 148500000 [0003.655] I> width = 1280, height = 768, frequency = 79500000 [0003.655] I> width = 1360, height = 768, frequency = 85500000 [0003.656] I> width = 720, height = 480, frequency = 26973026 [0003.659] I> width = 720, height = 576, frequency = 26973026 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1280, height = 720, frequency = 74175824 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 1920, height = 1080, frequency = 148351648 [0003.688] I> width = 720, height = 480, frequency = 26973026 [0003.693] I> width = 720, height = 576, frequency = 26973026 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 3840, height = 2160, frequency = 296703296 [0003.722] I> width = 4096, height = 2160, frequency = 296703296 [0003.728] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.739] I> hdmi_enable, starting HDMI initialisation [0003.744] I> hdmi_enable, HDMI initialisation complete [0003.754] initializing target [0003.754] calling apps_init() [0003.755] starting app kernel_boot_app [0003.756] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000758] Console: colour dummy device 80x25 [ 0.002289] printk: console [tty0] enabled [ 0.002380] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002416] pid_max: default: 32768 minimum: 301 [ 0.002641] LSM: Security Framework initializing [ 0.002700] Yama: becoming mindful. [ 0.002742] SELinux: Initializing. [ 0.002925] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002979] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006239] rcu: Hierarchical SRCU implementation. [ 0.006485] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007197] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007230] DTB Build time: Aug 10 2022 20:31:49 [ 0.009980] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010233] Remapping and enabling EFI services. [ 0.012286] smp: Bringing up secondary CPUs ... [ 0.041630] Detected PIPT I-cache on CPU1 [ 0.041706] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071229] Detected PIPT I-cache on CPU2 [ 0.071381] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101069] Detected PIPT I-cache on CPU3 [ 0.101217] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130970] Detected PIPT I-cache on CPU4 [ 0.131208] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160968] Detected PIPT I-cache on CPU5 [ 0.161129] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161531] smp: Brought up 1 node, 6 CPUs [ 0.161694] SMP: Total of 6 processors activated. [ 0.161772] CPU features: detected: Privileged Access Never [ 0.161796] CPU features: detected: LSE atomic instructions [ 0.161809] CPU features: detected: User Access Override [ 0.161823] CPU features: detected: 32-bit EL0 Support [ 0.161835] CPU features: detected: RAS Extension Support [ 0.161847] CPU features: detected: CRC32 instructions [ 0.161860] CPU features: detected: 32-bit EL1 Support [ 0.230967] CPU: All CPU(s) started at EL2 [ 0.237484] devtmpfs: initialized [ 0.284727] Registered cp15_barrier emulation handler [ 0.284879] Registered setend emulation handler [ 0.284900] KASLR enabled [ 0.285157] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285183] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286503] pinctrl core: initialized pinctrl subsystem [ 0.287499] SMBIOS 3.0.0 present. [ 0.287541] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288117] NET: Registered protocol family 16 [ 0.289983] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.290510] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291216] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291268] audit: initializing netlink subsys (disabled) [ 0.291515] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.291898] thermal_sys: Registered thermal governor 'step_wise' [ 0.291906] thermal_sys: Registered thermal governor 'power_allocator' [ 0.291920] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294160] cpuidle: using governor menu [ 0.294473] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.294890] ASID allocator initialised with 32768 entries [ 0.295099] Serial: AMBA PL011 UART driver [ 0.298331] Tegra reboot handler registered. [ 0.372811] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.372945] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.373115] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.373155] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.373283] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.373317] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.373463] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.373512] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.373639] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.373675] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.375854] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.375902] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.375926] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.375949] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.375974] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.376000] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.376025] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.376047] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.376069] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.376091] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.376114] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.376135] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.376158] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.376180] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.376218] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.376240] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.376264] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.376377] mc-err: mcerr ops are set to t19x [ 0.388701] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.388739] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.388751] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.388763] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.395568] ACPI: Interpreter disabled. [ 0.396690] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.398013] iommu: Default domain type: Translated [ 0.398090] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.398466] SCSI subsystem initialized [ 0.398643] usbcore: registered new interface driver usbfs [ 0.398686] usbcore: registered new interface driver hub [ 0.398721] usbcore: registered new device driver usb [ 0.399155] mc: Linux media interface: v0.10 [ 0.399186] videodev: Linux video capture interface: v2.00 [ 0.399464] pps_core: LinuxPPS API ver. 1 registered [ 0.399476] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.399498] PTP clock support registered [ 0.399687] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.399984] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.400102] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.400687] Registered efivars operations [ 0.407268] FPGA manager framework [ 0.407398] Advanced Linux Sound Architecture Driver Initialized. [ 0.407964] Bluetooth: Core ver 2.22 [ 0.408002] NET: Registered protocol family 31 [ 0.408013] Bluetooth: HCI device and connection manager initialized [ 0.408028] Bluetooth: HCI socket layer initialized [ 0.408043] Bluetooth: L2CAP socket layer initialized [ 0.408064] Bluetooth: SCO socket layer initialized [ 0.409589] camchar: rtcpu character device driver loaded [ 0.410281] clocksource: Switched to clocksource arch_sys_counter [ 0.721736] VFS: Disk quotas dquot_6.6.0 [ 0.721807] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.722154] pnp: PnP ACPI: disabled [ 0.734848] la/ptsa driver initialized. [ 0.734979] NET: Registered protocol family 2 [ 0.735161] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.740812] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.740885] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.741176] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.741601] TCP: Hash tables configured (established 65536 bind 65536) [ 0.741720] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.741833] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.742030] NET: Registered protocol family 1 [ 0.742622] RPC: Registered named UNIX socket transport module. [ 0.742637] RPC: Registered udp transport module. [ 0.742647] RPC: Registered tcp transport module. [ 0.742656] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.742681] PCI: CLS 0 bytes, default 64 [ 0.742881] Trying to unpack rootfs image as initramfs... [ 0.934572] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.936786] Freeing initrd memory: 8196K [ 0.940685] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.940726] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.940770] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.941221] kvm [1]: IPA Size Limit: 40 bits [ 0.941641] kvm [1]: vgic interrupt IRQ9 [ 0.942077] kvm [1]: VHE mode initialized successfully [ 0.943695] Initialise system trusted keyrings [ 0.943957] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.949385] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.950138] NFS: Registering the id_resolver key type [ 0.950164] Key type id_resolver registered [ 0.950175] Key type id_legacy registered [ 0.950240] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.950260] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.950340] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.959053] NET: Registered protocol family 38 [ 0.959072] Key type asymmetric registered [ 0.959083] Asymmetric key parser 'x509' registered [ 0.959123] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.959336] io scheduler mq-deadline registered [ 0.959350] io scheduler kyber registered [ 0.964082] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.966200] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.966258] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.966343] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.966394] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.966451] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.970818] scrncapt: init (heads:4 wins:6 planes:4) [ 0.971077] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.971821] EINJ: ACPI disabled. [ 0.974444] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.974466] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.974476] tegra-pmc: ### PMC reset level: L1 [ 0.974486] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.974525] tegra-pmc: PMC Prod config success [ 0.979384] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.983548] random: fast init done [ 0.983682] printk: console [ttyTCU0] enabled [ 2.536415] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.540890] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.545206] arm-smmu 10000000.iommu: stage 1 translation [ 2.551078] arm-smmu 10000000.iommu: stage 2 translation [ 2.556448] arm-smmu 10000000.iommu: nested translation [ 2.561536] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.568707] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.580191] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.581804] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.588423] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.596470] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.601430] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.606409] arm-smmu 12000000.iommu: stage 1 translation [ 2.611660] arm-smmu 12000000.iommu: stage 2 translation [ 2.617343] arm-smmu 12000000.iommu: nested translation [ 2.622523] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.629956] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.640981] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.642818] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.649375] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.657079] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.666557] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.669739] tegra_profiler: auth: init [ 2.674362] THERMAL EST: found 3 subdevs [ 2.677441] THERMAL EST num_resources: 0 [ 2.681578] [THERMAL EST subdev 0] [ 2.684917] [THERMAL EST subdev 1] [ 2.688307] [THERMAL EST subdev 2] [ 2.691317] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.697760] THERMAL EST: thz register success. [ 2.702000] THERMAL EST: end of probe, return err: 0 [ 2.707575] nvsciipc: loaded module [ 2.714932] tun: Universal TUN/TAP device driver, 1.6 [ 2.717193] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.723058] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.728867] e1000e: Intel(R) PRO/1000 Network Driver [ 2.733548] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.739893] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.745184] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.751384] PPP generic driver version 2.4.2 [ 2.755377] PPP BSD Compression module registered [ 2.759909] PPP Deflate Compression module registered [ 2.765411] PPP MPPE Compression module registered [ 2.770173] usbcore: registered new interface driver r8152 [ 2.775690] usbcore: registered new interface driver asix [ 2.781264] usbcore: registered new interface driver ax88179_178a [ 2.787391] usbcore: registered new interface driver cdc_ether [ 2.793077] usbcore: registered new interface driver net1080 [ 2.798677] usbcore: registered new interface driver cdc_subset [ 2.804714] usbcore: registered new interface driver zaurus [ 2.810416] usbcore: registered new interface driver cdc_ncm [ 2.816353] usbcore: registered new interface driver aqc111 [ 2.822102] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.828097] ohci-pci: OHCI PCI platform driver [ 2.832133] ohci-platform: OHCI generic platform driver [ 2.837964] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.844556] usbcore: registered new interface driver uas [ 2.848664] usbcore: registered new interface driver usb-storage [ 2.854832] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.860587] mousedev: PS/2 mouse device common for all mice [ 2.865809] usbcore: registered new interface driver xpad [ 2.873524] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.876587] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.884348] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.890993] i2c /dev entries driver [ 2.893937] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.899740] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.905352] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.910790] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.916065] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.921562] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.927043] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.940698] device-mapper: uevent: version 1.0.3 [ 2.941163] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.947380] cpuidle: Initializing cpuidle driver [ 2.951461] sdhci: Secure Digital Host Controller Interface driver [ 2.956162] sdhci: Copyright(c) Pierre Ossman [ 2.960007] Synopsys Designware Multimedia Card Interface Driver [ 2.966454] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.972458] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.973313] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.985676] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.008069] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.017769] vdd-1v0: supplied by regulator-dummy [ 3.023353] vdd-1v8-hs: supplied by regulator-dummy [ 3.028235] vdd-1v8-ls: supplied by regulator-dummy [ 3.033120] vdd-1v8-ao: supplied by regulator-dummy [ 3.037149] vddio-ddr-1v1: supplied by regulator-dummy [ 3.041648] vdd-rtc: supplied by regulator-dummy [ 3.043538] spmic-ldo1: supplied by regulator-dummy [ 3.044791] vdd-ao-3v3: supplied by regulator-dummy [ 3.051080] vddio-emmc-3v3: supplied by regulator-dummy [ 3.057409] spmic-ldo4: supplied by regulator-dummy [ 3.058828] vdd-usb-3v3: supplied by regulator-dummy [ 3.065162] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.071427] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.077049] spmic-ldo8: supplied by vdd-1v8-ls [ 3.078557] gpio-510 (gpio_default): hogged as output/high [ 3.079894] gpio-511 (gpio_default): hogged as output/high [ 3.082812] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.218813] max77686-rtc max77620-rtc: registered as rtc0 [ 3.220160] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.220511] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.057153] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.058443] hid: raw HID events driver (C) Jiri Kosina [ 4.059358] usbcore: registered new interface driver usbhid [ 4.059500] usbhid: USB HID core driver [ 4.061856] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.063160] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.143718] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.218014] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.106 ms) ÿá[ 4.147057] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.147648] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.148713] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.149573] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.151561] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.152268] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.152796] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.154118] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.154499] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.156343] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.163499] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.169711] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.174864] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.181180] denver_knobs_init:MTS_VERSION:55637613 [ 4.193143] t19x_cache tegra-cache: probed [ 4.195960] optee: probing for conduit method. [ 4.196736] optee: revision 3.16 (65cc2218) [ 4.197667] optee: dynamic shared memory is enabled [ 4.202179] optee: initialized driver [ 4.208281] nvpmodel: initialized successfully [ 4.209745] tegra_hv: get_hvd: not initialized yet [ 4.214498] user_ivc_mempool: hypervisor not present [ 4.220517] usbcore: registered new interface driver snd-usb-audio [ 4.226921] u32 classifier [ 4.228231] input device check on [ 4.232104] Actions configured [ 4.235562] Initializing XFRM netlink socket [ 4.240564] NET: Registered protocol family 10 [ 4.246401] Segment Routing with IPv6 [ 4.247615] NET: Registered protocol family 17 [ 4.252104] NET: Registered protocol family 15 [ 4.256276] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.269969] Bluetooth: RFCOMM socket layer initialized [ 4.274819] Bluetooth: RFCOMM ver 1.11 [ 4.278480] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.284517] Bluetooth: HIDP socket layer initialized [ 4.290049] 9pnet: Installing 9P2000 support [ 4.293724] Key type dns_resolver registered [ 4.299887] registered taskstats version 1 [ 4.302121] Loading compiled-in X.509 certificates [ 4.314451] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.318496] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.328506] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.330384] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.338803] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.347220] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.462348] tegra194-pcie 14160000.pcie: Link up [ 4.465087] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.465272] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.465400] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.465600] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.465760] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.466080] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.466526] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.476813] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.477311] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.477749] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.479415] pci 0004:01:00.0: supports D1 D2 [ 4.479649] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.488534] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.488878] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.489109] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.489506] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.489746] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.490891] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.496940] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.504279] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.513091] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.523447] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.527742] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.533487] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.540222] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.548602] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.550790] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.559491] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.567958] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.670449] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.670957] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.671161] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.671281] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.671528] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.671687] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.672025] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.672424] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.689251] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.689668] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.691788] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.693036] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.694816] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.696424] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.697212] pci 0005:00:00.0: Removing from iommu group 7 [ 5.697459] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.731368] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.753761] host1x 13e10000.host1x: initialized [ 5.755537] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.756475] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.757564] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.758227] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.759575] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.760210] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.761155] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.761711] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.763602] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.770460] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.780336] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.787574] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.797542] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.804220] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.814165] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.821516] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.831187] falcon 15340000.vic: Adding to iommu group 17 [ 5.845601] falcon 15340000.vic: initialized [ 5.846590] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.851342] falcon 15380000.nvjpg: initialized [ 5.851774] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.864031] falcon 154c0000.nvenc: initialized [ 5.864526] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.874095] falcon 15a80000.nvenc1: initialized [ 5.874638] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.885743] nvdec 15480000.nvdec: initialized [ 5.886354] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.895726] nvdec 15140000.nvdec1: initialized [ 5.896281] tsec 15500000.tsec: Adding to iommu group 18 [ 5.902738] tsec 15500000.tsec: initialized [ 5.903348] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.911853] tsec 15100000.tsecb: initialized [ 5.915730] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.940578] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.951983] gpio-374 (wifi-enable): hogged as output/high [ 5.952262] gpio-431 (camera-control-output-low): hogged as output/low [ 5.952532] gpio-432 (camera-control-output-low): hogged as output/low [ 5.954389] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.955905] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.956393] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.962957] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.968019] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.973783] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.979440] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.987433] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.994874] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.005914] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.011744] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.017726] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.026609] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.035718] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.042927] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.050616] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.056886] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.066253] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.072735] pva 16000000.pva0: Adding to iommu group 22 [ 6.097861] pva 16000000.pva0: initialized [ 6.103001] pva 16800000.pva1: Adding to iommu group 23 [ 6.114161] pva 16800000.pva1: initialized [ 6.118442] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.130974] nvdla 15880000.nvdla0: initialized [ 6.132072] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.139845] nvdla 158c0000.nvdla1: initialized [ 6.142045] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.142372] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.142693] tegradccommon 15200000.display-hub: dma mapping done [ 6.144422] tegradc 15200000.display: Adding to iommu group 26 [ 6.152580] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.152906] generic_infoframe_type: 0x87 [ 6.153118] tegradc 15200000.display: DT parsed successfully [ 6.153368] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.161726] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.164293] tegradc 15210000.display: Adding to iommu group 26 [ 6.169235] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.181590] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.182153] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.188416] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.188429] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.195069] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.216769] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.217053] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.222400] tegra_cec 3960000.tegra_cec: probed [ 6.228556] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.233897] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.245694] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.247547] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.263696] kfuse 3830000.kfuse: initialized [ 6.267873] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.268217] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.280902] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.281079] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.288230] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.296682] tegradc 15210000.display: disp0 connected to head1->sor [ 6.301459] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.306686] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.317132] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.322273] tegradc 15210000.display: DT parsed successfully [ 6.329178] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.333761] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.344447] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.357940] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.377237] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.377594] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.380301] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.388540] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.397464] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.403716] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.411541] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.418753] usb usb1: Product: xHCI Host Controller [ 6.423489] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.429755] usb usb1: SerialNumber: 3610000.xhci [ 6.435465] hub 1-0:1.0: USB hub found [ 6.438800] hub 1-0:1.0: 4 ports detected [ 6.443130] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.447779] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.455631] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.463265] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.471275] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.478434] usb usb2: Product: xHCI Host Controller [ 6.483170] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.489344] usb usb2: SerialNumber: 3610000.xhci [ 6.494918] hub 2-0:1.0: USB hub found [ 6.497849] hub 2-0:1.0: 4 ports detected [ 6.538972] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.544509] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.545692] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.545868] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.559304] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.560340] tegra194-cpufreq ccplex: probed with BWMGR [ 6.561617] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.562458] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.562955] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.564268] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.573179] mmc0: CQHCI version 5.10 [ 6.575171] tegra194-vi5 15c10000.vi: initialized [ 6.576455] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.577815] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.581951] generic_infoframe_type: 0x87 [ 6.588310] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.592249] tegradc 15200000.display: DT parsed successfully [ 6.600022] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.605939] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.612012] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.612023] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.621307] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.626876] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.634228] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.634338] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.634345] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.634351] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.635550] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.635592] nvethernet 2490000.ethernet: Macsec not supported [ 6.636821] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.637882] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.638017] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.638127] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.639052] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.640659] tegra-se-nvhost 15810000.se: initialized [ 6.641560] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.684604] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.689157] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.697372] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.703323] tegradc 15200000.display: vblank syncpt # 12 for dc 0 [ 6.710633] tegra-se-nvhost 15820000.se: initialized [ 6.716861] tegradc 15200000.display: vpulse3 syncpt # 13 for dc 0 [ 6.725265] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.728078] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.736684] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.743306] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.750374] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.780132] tegra-se-nvhost 15830000.se: initialized [ 6.791071] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.798938] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.807041] tegradc 15200000.display: probed [ 6.811857] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.832384] mmc0: Command Queue Engine enabled [ 6.835538] tegra-se-nvhost 15840000.se: initialized [ 6.840818] mmc0: periodic cache flush enabled [ 6.840843] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.841466] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.847268] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.850061] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.855959] tegra_actmon d230000.actmon: in actmon_register()... [ 6.872705] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.879371] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.899008] Console: switching to colour frame buffer device 240x67 [ 6.899026] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.899741] hvc_sysfs: hypervisor is not present [ 6.904732] tegradc 15200000.display: fb registered [ 6.922593] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.953767] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.953971] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.954158] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.954312] usb 1-2: Manufacturer: Generic [ 6.956732] hub 1-2:1.0: USB hub found [ 6.957327] ALSA device list: [ 6.957865] hub 1-2:1.0: 4 ports detected [ 6.958830] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.959057] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.959384] No soundcards found. [ 7.026632] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.027907] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.028113] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.029047] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.029215] Extcon AUX1(HDMI) enable [ 7.029544] tegradc 15210000.display: disp1 connected to head1->sor [ 7.029904] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.030238] tegradc 15210000.display: DT parsed successfully [ 7.032943] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.041149] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.047318] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.060389] tegradc 15210000.display: probed [ 7.060700] tegradc 15210000.display: fb registered [ 7.066307] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.069902] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.071193] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.077949] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.079169] Freeing unused kernel memory: 3968K [ 7.095761] tegradc 15210000.display: blank - powerdown [ 7.100882] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.102554] Run /init as init process [ 7.108828] Extcon DP: HPD disabled [ 7.108833] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.108865] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.116059] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.119888] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.119894] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.119899] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.119903] usb 2-3: Manufacturer: Generic [ 7.133379] hub 2-3:1.0: USB hub found [ 7.166541] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.197056] tegradc 15200000.display: blank - powerdown [ 7.216264] Root device found: mmcblk0p1 [ 7.218337] Found dev node: /dev/mmcblk0p1 [ 7.234363] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.243708] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.243712] Extcon AUX1(HDMI) disable [ 7.252912] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.256889] Rootfs mounted over mmcblk0p1 [ 7.262325] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.266881] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.267687] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.279959] tegradc 15200000.display: unblank [ 7.280933] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.281113] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.284894] Switching from initrd to actual rootfs [ 7.286873] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.288741] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.292747] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.292751] Extcon AUX1(HDMI) enable [ 7.298902] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.298907] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.305542] tegradc 15200000.display: sync windows ret = 247 [ 7.344096] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.350957] Extcon HDMI: HPD enabled [ 7.354880] tegradc 15200000.display: hdmi: plugged [ 7.415616] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.417030] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.418379] usb 1-3: Product: Bluetooth Radio [ 7.419640] usb 1-3: Manufacturer: Realtek [ 7.420878] usb 1-3: SerialNumber: 00e04c000001 [ 7.486932] systemd[1]: System time before build time, advancing clock. [ 7.504648] random: crng init done [ 7.555656] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.560527] systemd[1]: Detected architecture arm64. [ 7.608492] systemd[1]: Set hostname to . [ 7.770650] systemd-sysv-generator[241]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.125985] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.127732] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.133124] systemd[1]: Created slice system-modprobe.slice. [ 8.137802] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.141842] systemd[1]: Created slice User and Session Slice. [ 8.145309] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.149871] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.153285] systemd[1]: Reached target User and Group Name Lookups. [ 8.156539] systemd[1]: Reached target Slices. [ 8.159638] systemd[1]: Reached target Swap. [ 8.163596] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.167251] systemd[1]: Listening on Syslog Socket. [ 8.170782] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.174188] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.178420] systemd[1]: Listening on Journal Audit Socket. [ 8.181967] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.187586] systemd[1]: Listening on Journal Socket. [ 8.193644] systemd[1]: Listening on udev Control Socket. [ 8.199644] systemd[1]: Listening on udev Kernel Socket. [ 8.210566] systemd[1]: Mounting Huge Pages File System... [ 8.221974] systemd[1]: Mounting POSIX Message Queue File System... [ 8.230235] systemd[1]: Mounting RPC Pipe File System... [ 8.240176] systemd[1]: Mounting Kernel Debug File System... [ 8.249854] systemd[1]: Mounting Kernel Trace File System... [ 8.259553] systemd[1]: Starting Journal Service... [ 8.268031] systemd[1]: Starting Set the console keyboard layout... [ 8.275849] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.279409] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.285630] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.293707] systemd[1]: Started Nameserver information manager. [ 8.297921] systemd[1]: Reached target Network (Pre). [ 8.304684] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.306696] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.313631] systemd[1]: Starting Load Kernel Modules... [ 8.321331] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.330434] systemd[1]: Starting udev Coldplug all Devices... [ 8.340374] systemd[1]: Mounted Huge Pages File System. [ 8.344166] systemd[1]: Mounted POSIX Message Queue File System. [ 8.348066] systemd[1]: Mounted RPC Pipe File System. [ 8.350146] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.355864] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.355993] systemd[1]: Mounted Kernel Debug File System. [ 8.359010] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.360533] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.361994] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.363436] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.363735] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.365104] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.368021] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.368031] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.373450] systemd[1]: Mounted Kernel Trace File System. [ 8.380046] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.384852] systemd[1]: nvfb-udev.service: Succeeded. [ 8.389771] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.399219] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.405186] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.406974] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.417893] systemd[1]: Starting Load/Save Random Seed... [ 8.426687] systemd[1]: Starting Create System Users... [ 8.463665] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.463665] [ 8.485029] systemd[1]: Finished Create System Users. [ 8.494179] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.501367] systemd[1]: Finished Load Kernel Modules. [ 8.508543] systemd[1]: Finished Load/Save Random Seed. [ 8.513326] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.521274] systemd[1]: Mounting Kernel Configuration File System... [ 8.529505] systemd[1]: Started OP-TEE Client Supplicant. [ 8.537789] systemd[1]: Starting Apply Kernel Variables... [ 8.548554] systemd[1]: Finished Set the console keyboard layout. [ 8.555618] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.562416] systemd[1]: Mounted Kernel Configuration File System. [ 8.566423] systemd[1]: Reached target Local File Systems (Pre). [ 8.569645] systemd[1]: Reached target Local File Systems. [ 10.098351] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.108606] imx219 9-0010: board setup failed [ 10.109833] imx219: probe of 9-0010 failed with error -121 [ 10.147223] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.155567] imx219 10-0010: board setup failed [ 10.155662] imx219: probe of 10-0010 failed with error -121 [ 10.203066] hot-surface-alert cooling state: 0 -> 1 [ 10.327368] using random self ethernet address [ 10.328600] using random host ethernet address [ 11.622264] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.623998] Creating 1 MTD partitions on "spi6.0": [ 11.630712] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.258029] using random self ethernet address [ 12.260682] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.830590] nvidia: loading out-of-tree module taints kernel. [ 58.871855] watchdog: watchdog0: watchdog did not stop! [ 59.315142] Trying to unregister non-registered hwtime source [ 62.372779] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.374801] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busyÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.327] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.361] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.035] > DEVICE_PROD: device prod is not initialized. [0002.340] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.341] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.342] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.342] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.343] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.343] I> dram_block larger than 80000000 [0002.345] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.357] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.360] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.591] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.210] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.211] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.211] I> 2) Base:0xc9800000 Size:0x00200000 [0003.212] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.219] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.250] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.259] I> 14) Base:0x40048000 Size:0x00002000 [0003.263] I> 15) Base:0xaf000000 Size:0x00004000 [0003.268] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.277] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.308] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.317] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.321] I> 28) Base:0xc8400000 Size:0x00200000 [0003.326] I> 29) Base:0xc8800000 Size:0x00400000 [0003.330] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.335] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.375] I> 40) Base:0x00000000 Size:0x00000000 [0003.379] I> 41) Base:0x00000000 Size:0x00000000 [0003.384] I> 42) Base:0x00000000 Size:0x00000000 [0003.388] I> 43) Base:0x00000000 Size:0x00000000 [0003.393] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.402] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.417] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.427] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.435] initializing platform [0003.438] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.447] I> Bl_dtb @0xadf00000 [0003.450] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.491] I> register 'maxim' power off handle [0003.494] I> virtual i2c enabled [0003.494] I> registered 'maxim,max20024' pmic [0003.495] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.495] I> Boot-device: QSPI [0003.495] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.525] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.544] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.557] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.575] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.607] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.619] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.650] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.652] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.750] initializing target [0003.751] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000738] Console: colour dummy device 80x25 [ 0.002279] printk: console [tty0] enabled [ 0.002341] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002376] pid_max: default: 32768 minimum: 301 [ 0.002612] LSM: Security Framework initializing [ 0.002671] Yama: becoming mindful. [ 0.002715] SELinux: Initializing. [ 0.002913] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002952] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006338] rcu: Hierarchical SRCU implementation. [ 0.006570] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007408] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007449] DTB Build time: Aug 10 2022 20:31:49 [ 0.010394] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010659] Remapping and enabling EFI services. [ 0.012934] smp: Bringing up secondary CPUs ... [ 0.042131] Detected PIPT I-cache on CPU1 [ 0.042208] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073152] Detected PIPT I-cache on CPU2 [ 0.073305] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102939] Detected PIPT I-cache on CPU3 [ 0.103082] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132816] Detected PIPT I-cache on CPU4 [ 0.132912] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162651] Detected PIPT I-cache on CPU5 [ 0.162761] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163067] smp: Brought up 1 node, 6 CPUs [ 0.163299] SMP: Total of 6 processors activated. [ 0.163330] CPU features: detected: Privileged Access Never [ 0.163343] CPU features: detected: LSE atomic instructions [ 0.163354] CPU features: detected: User Access Override [ 0.163366] CPU features: detected: 32-bit EL0 Support [ 0.163378] CPU features: detected: RAS Extension Support [ 0.163390] CPU features: detected: CRC32 instructions [ 0.163402] CPU features: detected: 32-bit EL1 Support [ 0.234070] CPU: All CPU(s) started at EL2 [ 0.239418] devtmpfs: initialized [ 0.292710] Registered cp15_barrier emulation handler [ 0.292825] Registered setend emulation handler [ 0.292847] KASLR enabled [ 0.293168] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.293197] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.294540] pinctrl core: initialized pinctrl subsystem [ 0.295618] SMBIOS 3.0.0 present. [ 0.295647] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.296272] NET: Registered protocol family 16 [ 0.298695] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.299195] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.299885] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.299944] audit: initializing netlink subsys (disabled) [ 0.300245] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.300662] thermal_sys: Registered thermal governor 'step_wise' [ 0.300669] thermal_sys: Registered thermal governor 'power_allocator' [ 0.300692] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.304277] cpuidle: using governor menu [ 0.305009] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.305505] ASID allocator initialised with 32768 entries [ 0.305713] Serial: AMBA PL011 UART driver [ 0.309355] Tegra reboot handler registered. [ 0.388816] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.388974] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.389162] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.389208] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.389394] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.389494] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.389615] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.389656] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.389775] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.389831] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.392100] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.392136] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.392163] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.392189] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.392217] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.392242] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.392279] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.392310] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.392334] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.392377] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.392400] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.392440] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.392463] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.392501] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.392524] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.392547] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.392575] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.392663] mc-err: mcerr ops are set to t19x [ 0.406281] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.406306] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.406318] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.406332] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.413606] ACPI: Interpreter disabled. [ 0.414984] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.416417] iommu: Default domain type: Translated [ 0.416495] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.416863] SCSI subsystem initialized [ 0.417052] usbcore: registered new interface driver usbfs [ 0.417095] usbcore: registered new interface driver hub [ 0.417129] usbcore: registered new device driver usb [ 0.417528] mc: Linux media interface: v0.10 [ 0.417557] videodev: Linux video capture interface: v2.00 [ 0.417826] pps_core: LinuxPPS API ver. 1 registered [ 0.417837] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.417856] PTP clock support registered [ 0.418053] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.418367] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.418452] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.419052] Registered efivars operations [ 0.425744] FPGA manager framework [ 0.425874] Advanced Linux Sound Architecture Driver Initialized. [ 0.426539] Bluetooth: Core ver 2.22 [ 0.426582] NET: Registered protocol family 31 [ 0.426596] Bluetooth: HCI device and connection manager initialized [ 0.426650] Bluetooth: HCI socket layer initialized [ 0.426671] Bluetooth: L2CAP socket layer initialized [ 0.426705] Bluetooth: SCO socket layer initialized [ 0.428244] camchar: rtcpu character device driver loaded [ 0.429171] clocksource: Switched to clocksource arch_sys_counter [ 0.714361] VFS: Disk quotas dquot_6.6.0 [ 0.714466] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.714805] pnp: PnP ACPI: disabled [ 0.726944] la/ptsa driver initialized. [ 0.727084] NET: Registered protocol family 2 [ 0.727287] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.732821] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.732964] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.733415] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.734092] TCP: Hash tables configured (established 65536 bind 65536) [ 0.734344] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.734517] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.734892] NET: Registered protocol family 1 [ 0.735893] RPC: Registered named UNIX socket transport module. [ 0.735929] RPC: Registered udp transport module. [ 0.735982] RPC: Registered tcp transport module. [ 0.736007] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.736043] PCI: CLS 0 bytes, default 64 [ 0.736370] Trying to unpack rootfs image as initramfs... [ 1.005024] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.008198] Freeing initrd memory: 8196K [ 1.013165] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.013246] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.013315] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.013657] kvm [1]: IPA Size Limit: 40 bits [ 1.014160] kvm [1]: vgic interrupt IRQ9 [ 1.014715] kvm [1]: VHE mode initialized successfully [ 1.016366] Initialise system trusted keyrings [ 1.016744] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.024702] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.025748] NFS: Registering the id_resolver key type [ 1.025815] Key type id_resolver registered [ 1.025842] Key type id_legacy registered [ 1.025942] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.025965] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.026005] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.039890] NET: Registered protocol family 38 [ 1.039923] Key type asymmetric registered [ 1.039941] Asymmetric key parser 'x509' registered [ 1.040023] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.040366] io scheduler mq-deadline registered [ 1.040390] io scheduler kyber registered [ 1.046821] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.049570] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.049650] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.049722] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.049793] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.049903] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.055778] scrncapt: init (heads:4 wins:6 planes:4) [ 1.055941] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.056876] EINJ: ACPI disabled. [ 1.060368] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.060417] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.060432] tegra-pmc: ### PMC reset level: L1 [ 1.060445] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.060519] tegra-pmc: PMC Prod config success [ 1.066182] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.082872] random: fast init done [ 2.617475] printk: console [ttyTCU0] enabled [ 2.623256] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.627870] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.632728] arm-smmu 10000000.iommu: stage 1 translation [ 2.638073] arm-smmu 10000000.iommu: stage 2 translation [ 2.643766] arm-smmu 10000000.iommu: nested translation [ 2.649028] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.656234] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.667747] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.669046] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.675892] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.683407] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.688928] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.693425] arm-smmu 12000000.iommu: stage 1 translation [ 2.699166] arm-smmu 12000000.iommu: stage 2 translation [ 2.704608] arm-smmu 12000000.iommu: nested translation [ 2.709760] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.717192] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.728621] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.730055] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.736616] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.744297] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.754875] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.757318] tegra_profiler: auth: init [ 2.761364] THERMAL EST: found 3 subdevs [ 2.764683] THERMAL EST num_resources: 0 [ 2.768813] [THERMAL EST subdev 0] [ 2.772137] [THERMAL EST subdev 1] [ 2.775546] [THERMAL EST subdev 2] [ 2.778533] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.785300] THERMAL EST: thz register success. [ 2.789503] THERMAL EST: end of probe, return err: 0 [ 2.794739] nvsciipc: loaded module [ 2.802145] tun: Universal TUN/TAP device driver, 1.6 [ 2.804324] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.810336] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.815911] e1000e: Intel(R) PRO/1000 Network Driver [ 2.820802] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.826874] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.832165] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.838601] PPP generic driver version 2.4.2 [ 2.842895] PPP BSD Compression module registered [ 2.847434] PPP Deflate Compression module registered [ 2.852393] PPP MPPE Compression module registered [ 2.857684] usbcore: registered new interface driver r8152 [ 2.862926] usbcore: registered new interface driver asix [ 2.868246] usbcore: registered new interface driver ax88179_178a [ 2.874378] usbcore: registered new interface driver cdc_ether [ 2.880596] usbcore: registered new interface driver net1080 [ 2.885922] usbcore: registered new interface driver cdc_subset [ 2.892213] usbcore: registered new interface driver zaurus [ 2.897945] usbcore: registered new interface driver cdc_ncm [ 2.903339] usbcore: registered new interface driver aqc111 [ 2.908996] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.915079] ohci-pci: OHCI PCI platform driver [ 2.919378] ohci-platform: OHCI generic platform driver [ 2.925372] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.932124] usbcore: registered new interface driver uas [ 2.935912] usbcore: registered new interface driver usb-storage [ 2.942071] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.947863] mousedev: PS/2 mouse device common for all mice [ 2.953064] usbcore: registered new interface driver xpad [ 2.961149] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.963542] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.971357] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.977866] i2c /dev entries driver [ 2.981523] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.987370] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.992534] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.997886] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.003076] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.008863] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.014325] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.030001] device-mapper: uevent: version 1.0.3 [ 3.030521] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.034630] cpuidle: Initializing cpuidle driver [ 3.038705] sdhci: Secure Digital Host Controller Interface driver [ 3.043149] sdhci: Copyright(c) Pierre Ossman [ 3.047500] Synopsys Designware Multimedia Card Interface Driver [ 3.053727] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.059696] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.065682] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.073130] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.102100] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.111907] vdd-1v0: supplied by regulator-dummy [ 3.117568] vdd-1v8-hs: supplied by regulator-dummy [ 3.122470] vdd-1v8-ls: supplied by regulator-dummy [ 3.127485] vdd-1v8-ao: supplied by regulator-dummy [ 3.131500] vddio-ddr-1v1: supplied by regulator-dummy [ 3.136033] vdd-rtc: supplied by regulator-dummy [ 3.137953] spmic-ldo1: supplied by regulator-dummy [ 3.139210] vdd-ao-3v3: supplied by regulator-dummy [ 3.145512] vddio-emmc-3v3: supplied by regulator-dummy [ 3.151850] spmic-ldo4: supplied by regulator-dummy [ 3.153150] vdd-usb-3v3: supplied by regulator-dummy [ 3.159416] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.165686] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.171362] spmic-ldo8: supplied by vdd-1v8-ls [ 3.173021] gpio-510 (gpio_default): hogged as output/high [ 3.174524] gpio-511 (gpio_default): hogged as output/high [ 3.177572] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.313386] max77686-rtc max77620-rtc: registered as rtc0 [ 3.314435] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.314780] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.158305] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.159489] hid: raw HID events driver (C) Jiri Kosina [ 4.160222] usbcore: registered new interface driver usbhid [ 4.160352] usbhid: USB HID core driver [ 4.162159] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.163569] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.240526] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.315521] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 75.805 ms) ÿá[ 4.248208] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.248853] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.250262] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.251398] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.253662] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.254341] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.254861] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.256445] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.256675] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.259203] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.264507] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.270949] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.276494] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.283571] denver_knobs_init:MTS_VERSION:55637613 [ 4.295137] t19x_cache tegra-cache: probed [ 4.298209] optee: probing for conduit method. [ 4.299154] optee: revision 3.16 (65cc2218) [ 4.300413] optee: dynamic shared memory is enabled [ 4.303314] optee: initialized driver [ 4.310026] nvpmodel: initialized successfully [ 4.311039] tegra_hv: get_hvd: not initialized yet [ 4.315448] user_ivc_mempool: hypervisor not present [ 4.322560] usbcore: registered new interface driver snd-usb-audio [ 4.328180] u32 classifier [ 4.329127] input device check on [ 4.333305] Actions configured [ 4.336732] Initializing XFRM netlink socket [ 4.341664] NET: Registered protocol family 10 [ 4.348203] Segment Routing with IPv6 [ 4.348763] NET: Registered protocol family 17 [ 4.353444] NET: Registered protocol family 15 [ 4.357755] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.371752] Bluetooth: RFCOMM socket layer initialized [ 4.376026] Bluetooth: RFCOMM ver 1.11 [ 4.379915] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.385446] Bluetooth: HIDP socket layer initialized [ 4.391735] 9pnet: Installing 9P2000 support [ 4.394870] Key type dns_resolver registered [ 4.401122] registered taskstats version 1 [ 4.403363] Loading compiled-in X.509 certificates [ 4.417614] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.419547] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.430258] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.431470] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.440170] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.448647] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.565356] tegra194-pcie 14160000.pcie: Link up [ 4.568447] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.568702] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.568915] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.569301] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.569510] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.569986] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.570480] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.586170] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.586768] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.587247] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.588807] pci 0004:01:00.0: supports D1 D2 [ 4.588974] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.599729] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.600062] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.600305] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.600674] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.600912] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.601077] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.601398] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.607749] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.616527] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.626149] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.631358] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.637161] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.644034] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.654025] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.654394] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.662675] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.671267] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.777272] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.777948] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.778161] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.778342] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.778585] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.778838] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.779205] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.779653] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.799750] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.800176] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.802394] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.803563] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.806082] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.808070] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.808977] pci 0005:00:00.0: Removing from iommu group 7 [ 5.809395] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.840953] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.864086] host1x 13e10000.host1x: initialized [ 5.866116] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.866948] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.867816] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.868476] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.869419] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.869973] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.870769] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.871352] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.872081] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.877470] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.887333] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.894517] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.904148] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.911474] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.921409] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.928308] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.938370] falcon 15340000.vic: Adding to iommu group 17 [ 5.952010] falcon 15340000.vic: initialized [ 5.953285] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.958592] falcon 15380000.nvjpg: initialized [ 5.959218] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.970560] falcon 154c0000.nvenc: initialized [ 5.971216] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.981655] falcon 15a80000.nvenc1: initialized [ 5.982323] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.994001] nvdec 15480000.nvdec: initialized [ 5.994859] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.003569] nvdec 15140000.nvdec1: initialized [ 6.004289] tsec 15500000.tsec: Adding to iommu group 18 [ 6.009998] tsec 15500000.tsec: initialized [ 6.010732] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.018420] tsec 15100000.tsecb: initialized [ 6.022497] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.045395] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.057650] gpio-374 (wifi-enable): hogged as output/high [ 6.057976] gpio-431 (camera-control-output-low): hogged as output/low [ 6.058256] gpio-432 (camera-control-output-low): hogged as output/low [ 6.059990] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.061915] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.062920] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.069721] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.075042] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.080678] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.086057] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.094655] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.101808] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.112916] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.118908] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.124433] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.133467] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.142558] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.150119] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.157282] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.163730] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.173416] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.179478] pva 16000000.pva0: Adding to iommu group 22 [ 6.205266] pva 16000000.pva0: initialized [ 6.210767] pva 16800000.pva1: Adding to iommu group 23 [ 6.220453] pva 16800000.pva1: initialized [ 6.224979] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.239231] nvdla 15880000.nvdla0: initialized [ 6.240818] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.249717] nvdla 158c0000.nvdla1: initialized [ 6.252547] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.252908] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.253747] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.253925] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.254149] tegradc 15200000.display: Adding to iommu group 26 [ 6.254323] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.254991] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.256962] tegradccommon 15200000.display-hub: dma mapping done [ 6.262490] tegradc 15210000.display: Adding to iommu group 26 [ 6.263881] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.280608] tegra_cec 3960000.tegra_cec: probed [ 6.286507] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.293017] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.298407] kfuse 3830000.kfuse: initialized [ 6.302982] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.308600] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.315698] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.321912] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.331619] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.336725] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.345869] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.351038] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.371533] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.371929] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.374604] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.382722] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.391161] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.397670] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.405621] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.412518] usb usb1: Product: xHCI Host Controller [ 6.417462] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.423992] usb usb1: SerialNumber: 3610000.xhci [ 6.429943] hub 1-0:1.0: USB hub found [ 6.432559] hub 1-0:1.0: 4 ports detected [ 6.437148] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.441716] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.449604] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.456990] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.465146] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.472129] usb usb2: Product: xHCI Host Controller [ 6.477366] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.483595] usb usb2: SerialNumber: 3610000.xhci [ 6.489077] hub 2-0:1.0: USB hub found [ 6.492147] hub 2-0:1.0: 4 ports detected [ 6.534717] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.540448] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.541964] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.542207] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.555444] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.556447] tegra194-cpufreq ccplex: probed with BWMGR [ 6.557772] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.558484] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.559022] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.560361] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.567489] mmc0: CQHCI version 5.10 [ 6.568596] tegra194-vi5 15c10000.vi: initialized [ 6.571067] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.572253] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.575801] generic_infoframe_type: 0x87 [ 6.582462] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.585847] tegradc 15200000.display: DT parsed successfully [ 6.594268] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.599761] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.606373] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.620795] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.627192] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.635405] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.642168] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.650358] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.650486] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.658599] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.662965] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.664612] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.664620] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.692267] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.693283] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.699048] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.716610] nvethernet 2490000.ethernet: Macsec not supported [ 6.718510] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.730114] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.731099] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.739906] tegradc 15200000.display: probed [ 6.746814] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.753249] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.756375] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.769838] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.777939] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.784472] tegra-se-nvhost 15810000.se: initialized [ 6.792495] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.794530] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.800929] tegra-se-nvhost 15820000.se: initialized [ 6.806756] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.811692] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.813257] mmc0: Command Queue Engine enabled [ 6.818083] tegra-se-nvhost 15830000.se: initialized [ 6.821843] mmc0: periodic cache flush enabled [ 6.821857] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.827950] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.831741] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.838226] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.844043] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.862324] Console: switching to colour frame buffer device 240x67 [ 6.862593] tegra-se-nvhost 15840000.se: initialized [ 6.868082] tegradc 15200000.display: fb registered [ 6.872535] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.874532] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.877918] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.887289] tegra_actmon d230000.actmon: in actmon_register()... [ 6.893012] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.897827] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.903689] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.909973] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.928160] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.929686] hvc_sysfs: hypervisor is not present [ 6.937544] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.949422] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.953937] usb 1-2: Manufacturer: Generic [ 6.960269] hub 1-2:1.0: USB hub found [ 6.962945] hub 1-2:1.0: 4 ports detected [ 6.976763] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.990644] ALSA device list: [ 6.990772] No soundcards found. [ 6.991834] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.992068] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.998123] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.004542] Extcon AUX1(HDMI) enable [ 7.008482] tegradc 15210000.display: disp1 connected to head1->sor [ 7.014291] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.021609] tegradc 15210000.display: DT parsed successfully [ 7.027246] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.035171] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 7.041214] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 7.047994] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.056714] tegradc 15210000.display: probed [ 7.059581] tegradc 15210000.display: fb registered [ 7.067559] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.071308] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.073266] Freeing unused kernel memory: 3968K [ 7.079390] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.089276] Run /init as init process [ 7.092933] tegradc 15210000.display: blank - powerdown [ 7.098205] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.098209] Extcon DP: HPD disabled [ 7.098213] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.098228] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.123298] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.129911] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.137925] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.145252] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.149796] usb 2-3: Manufacturer: Generic [ 7.156122] Root device found: mmcblk0p1 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.157760] tegradc 15200000.display: blank - powerdown [ 7.159791] Found dev node: /dev/mmcblk0p1 [ 7.165015] hub 2-3:1.0: USB hub found [ 7.168505] hub 2-3:1.0: 4 ports detected [ 7.193840] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.193845] Extcon AUX1(HDMI) disable [ 7.195535] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.214953] Rootfs mounted over mmcblk0p1 [ 7.217140] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.218037] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.229378] tegradc 15200000.display: unblank [ 7.230734] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.231052] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.236875] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.238765] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.242786] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.242790] Extcon AUX1(HDMI) enable [ 7.249216] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.252306] Switching from initrd to actual rootfs [ 7.255541] tegradc 15200000.display: sync windows ret = 247 [ 7.265233] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.290199] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.292427] Extcon HDMI: HPD enabled [ 7.296157] tegradc 15200000.display: hdmi: plugged [ 7.342788] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.344174] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.398359] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.399771] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.401096] usb 1-3: Product: Bluetooth Radio [ 7.402383] usb 1-3: Manufacturer: Realtek [ 7.403617] usb 1-3: SerialNumber: 00e04c000001 [ 7.413753] systemd[1]: System time before build time, advancing clock. [ 7.482427] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.487182] systemd[1]: Detected architecture arm64. [ 7.523426] systemd[1]: Set hostname to . [ 7.687009] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.038943] random: systemd: uninitialized urandom read (16 bytes read) [ 8.040637] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.042301] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.047996] systemd[1]: Created slice system-modprobe.slice. [ 8.051612] random: systemd: uninitialized urandom read (16 bytes read) [ 8.054296] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.057449] random: systemd: uninitialized urandom read (16 bytes read) [ 8.060059] systemd[1]: Created slice User and Session Slice. [ 8.061559] random: crng init done [ 8.064974] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.069373] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.072705] systemd[1]: Reached target User and Group Name Lookups. [ 8.075968] systemd[1]: Reached target Slices. [ 8.079032] systemd[1]: Reached target Swap. [ 8.083101] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.086757] systemd[1]: Listening on Syslog Socket. [ 8.090350] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.093754] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.098088] systemd[1]: Listening on Journal Audit Socket. [ 8.101630] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.105343] systemd[1]: Listening on Journal Socket. [ 8.108982] systemd[1]: Listening on udev Control Socket. [ 8.113978] systemd[1]: Listening on udev Kernel Socket. [ 8.122285] systemd[1]: Mounting Huge Pages File System... [ 8.132071] systemd[1]: Mounting POSIX Message Queue File System... [ 8.140168] systemd[1]: Mounting RPC Pipe File System... [ 8.148646] systemd[1]: Mounting Kernel Debug File System... [ 8.157464] systemd[1]: Mounting Kernel Trace File System... [ 8.167631] systemd[1]: Starting Journal Service... [ 8.176675] systemd[1]: Starting Set the console keyboard layout... [ 8.184889] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.188554] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.194937] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.203101] systemd[1]: Started Nameserver information manager. [ 8.207555] systemd[1]: Reached target Network (Pre). [ 8.215152] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.217063] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.225756] systemd[1]: Starting Load Kernel Modules... [ 8.233531] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.241998] systemd[1]: Starting udev Coldplug all Devices... [ 8.251947] systemd[1]: Mounted Huge Pages File System. [ 8.255752] systemd[1]: Mounted POSIX Message Queue File System. [ 8.259334] systemd[1]: Mounted RPC Pipe File System. [ 8.263467] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.263560] systemd[1]: Mounted Kernel Debug File System. [ 8.269348] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.271516] systemd[1]: Mounted Kernel Trace File System. [ 8.271640] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.274513] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.274527] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.274532] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.274781] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.277454] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.289694] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.289757] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.308152] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.317075] systemd[1]: nvfb-udev.service: Succeeded. [ 8.321223] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.333117] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.349385] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.351169] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.358395] systemd[1]: Starting Load/Save Random Seed... [ 8.365963] systemd[1]: Starting Create System Users... [ 8.391566] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.391566] [ 8.413849] systemd[1]: Finished Load/Save Random Seed. [ 8.423570] systemd[1]: Finished Load Kernel Modules. [ 8.430199] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.436633] systemd[1]: Mounting Kernel Configuration File System... [ 8.444245] systemd[1]: Started OP-TEE Client Supplicant. [ 8.452204] systemd[1]: Starting Apply Kernel Variables... [ 8.463943] systemd[1]: Finished Set the console keyboard layout. [ 8.470560] systemd[1]: Finished Create System Users. [ 8.474533] systemd[1]: Mounted Kernel Configuration File System. [ 8.482179] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.850277] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.858571] imx219 9-0010: board setup failed [ 9.859844] imx219: probe of 9-0010 failed with error -121 [ 9.872046] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.881323] imx219 10-0010: board setup failed [ 9.882602] imx219: probe of 10-0010 failed with error -121 [ 9.991075] hot-surface-alert cooling state: 0 -> 1 [ 10.475552] using random self ethernet address [ 10.478299] using random host ethernet address [ 11.584421] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.584447] Creating 1 MTD partitions on "spi6.0": [ 11.584455] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.223425] using random self ethernet address [ 12.224945] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.837546] nvidia: loading out-of-tree module taints kernel. [ 58.543461] watchdog: watchdog0: watchdog did not stop! [ 59.022074] Trying to unregister non-registered hwtime source [ 62.084259] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.086414] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr bõÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.614] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.644] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.745] calling apps_init() [0003.746] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000700] Console: colour dummy device 80x25 [ 0.002154] printk: console [tty0] enabled [ 0.002218] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002256] pid_max: default: 32768 minimum: 301 [ 0.002459] LSM: Security Framework initializing [ 0.002520] Yama: becoming mindful. [ 0.002567] SELinux: Initializing. [ 0.002723] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002764] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005912] rcu: Hierarchical SRCU implementation. [ 0.006206] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006971] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007021] DTB Build time: Aug 10 2022 20:31:49 [ 0.009989] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010264] Remapping and enabling EFI services. [ 0.012298] smp: Bringing up secondary CPUs ... [ 0.041412] Detected PIPT I-cache on CPU1 [ 0.041485] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071093] Detected PIPT I-cache on CPU2 [ 0.071190] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100846] Detected PIPT I-cache on CPU3 [ 0.100937] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130716] Detected PIPT I-cache on CPU4 [ 0.130814] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160660] Detected PIPT I-cache on CPU5 [ 0.160760] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161095] smp: Brought up 1 node, 6 CPUs [ 0.161296] SMP: Total of 6 processors activated. [ 0.161369] CPU features: detected: Privileged Access Never [ 0.161390] CPU features: detected: LSE atomic instructions [ 0.161405] CPU features: detected: User Access Override [ 0.161419] CPU features: detected: 32-bit EL0 Support [ 0.161432] CPU features: detected: RAS Extension Support [ 0.161446] CPU features: detected: CRC32 instructions [ 0.161459] CPU features: detected: 32-bit EL1 Support [ 0.230663] CPU: All CPU(s) started at EL2 [ 0.235895] devtmpfs: initialized [ 0.283741] Registered cp15_barrier emulation handler [ 0.283897] Registered setend emulation handler [ 0.283921] KASLR enabled [ 0.284225] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.284252] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.285598] pinctrl core: initialized pinctrl subsystem [ 0.286587] SMBIOS 3.0.0 present. [ 0.286617] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.287210] NET: Registered protocol family 16 [ 0.289148] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.289675] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.290366] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.290426] audit: initializing netlink subsys (disabled) [ 0.290696] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.291114] thermal_sys: Registered thermal governor 'step_wise' [ 0.291121] thermal_sys: Registered thermal governor 'power_allocator' [ 0.291137] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.293153] cpuidle: using governor menu [ 0.293529] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.293948] ASID allocator initialised with 32768 entries [ 0.294224] Serial: AMBA PL011 UART driver [ 0.297522] Tegra reboot handler registered. [ 0.375188] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375297] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.375467] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.375512] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.375648] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.375710] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.375850] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.375894] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376013] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376056] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.378578] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.378614] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.378644] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.378676] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.378709] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.378737] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.378777] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.378811] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.378837] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.378878] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.378903] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.378942] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.378971] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379011] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379035] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379059] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379082] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.379169] mc-err: mcerr ops are set to t19x [ 0.392061] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392084] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.392096] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392108] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399430] ACPI: Interpreter disabled. [ 0.400670] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.402235] iommu: Default domain type: Translated [ 0.402306] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.402701] SCSI subsystem initialized [ 0.402872] usbcore: registered new interface driver usbfs [ 0.402923] usbcore: registered new interface driver hub [ 0.402960] usbcore: registered new device driver usb [ 0.403450] mc: Linux media interface: v0.10 [ 0.403486] videodev: Linux video capture interface: v2.00 [ 0.403801] pps_core: LinuxPPS API ver. 1 registered [ 0.403813] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403834] PTP clock support registered [ 0.404049] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404407] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.404510] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.405172] Registered efivars operations [ 0.411548] FPGA manager framework [ 0.411657] Advanced Linux Sound Architecture Driver Initialized. [ 0.412273] Bluetooth: Core ver 2.22 [ 0.412312] NET: Registered protocol family 31 [ 0.412323] Bluetooth: HCI device and connection manager initialized [ 0.412338] Bluetooth: HCI socket layer initialized [ 0.412354] Bluetooth: L2CAP socket layer initialized [ 0.412375] Bluetooth: SCO socket layer initialized [ 0.414344] camchar: rtcpu character device driver loaded [ 0.415520] clocksource: Switched to clocksource arch_sys_counter [ 0.707873] VFS: Disk quotas dquot_6.6.0 [ 0.707948] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.708400] pnp: PnP ACPI: disabled [ 0.721302] la/ptsa driver initialized. [ 0.721438] NET: Registered protocol family 2 [ 0.721588] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.726808] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.726873] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.727178] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.727642] TCP: Hash tables configured (established 65536 bind 65536) [ 0.727765] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.727853] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.728071] NET: Registered protocol family 1 [ 0.728675] RPC: Registered named UNIX socket transport module. [ 0.728689] RPC: Registered udp transport module. [ 0.728699] RPC: Registered tcp transport module. [ 0.728708] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.728741] PCI: CLS 0 bytes, default 64 [ 0.728958] Trying to unpack rootfs image as initramfs... [ 0.916669] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.918798] Freeing initrd memory: 8196K [ 0.923852] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.923892] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.923943] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.924351] kvm [1]: IPA Size Limit: 40 bits [ 0.924835] kvm [1]: vgic interrupt IRQ9 [ 0.925316] kvm [1]: VHE mode initialized successfully [ 0.926886] Initialise system trusted keyrings [ 0.927179] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.932668] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.933317] NFS: Registering the id_resolver key type [ 0.933351] Key type id_resolver registered [ 0.933361] Key type id_legacy registered [ 0.933459] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.933477] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.933522] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.944448] NET: Registered protocol family 38 [ 0.944466] Key type asymmetric registered [ 0.944495] Asymmetric key parser 'x509' registered [ 0.944531] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.944807] io scheduler mq-deadline registered [ 0.944821] io scheduler kyber registered [ 0.949557] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.951987] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.952046] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.952100] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.952151] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.952201] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.956163] scrncapt: init (heads:4 wins:6 planes:4) [ 0.956534] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.957127] EINJ: ACPI disabled. [ 0.959319] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.959341] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.959352] tegra-pmc: ### PMC reset level: L1 [ 0.959363] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.959406] tegra-pmc: PMC Prod config success [ 0.964076] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.968293] random: fast init done [ 0.969038] printk: console [ttyTCU0] enabled [ 2.520903] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.525456] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.530041] arm-smmu 10000000.iommu: stage 1 translation [ 2.535330] arm-smmu 10000000.iommu: stage 2 translation [ 2.541024] arm-smmu 10000000.iommu: nested translation [ 2.546149] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.553284] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.564738] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.566635] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.572967] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.581065] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.586261] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.590982] arm-smmu 12000000.iommu: stage 1 translation [ 2.596260] arm-smmu 12000000.iommu: stage 2 translation [ 2.601686] arm-smmu 12000000.iommu: nested translation [ 2.607370] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.614527] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.625753] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.627644] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.634230] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.641374] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.651202] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.654658] tegra_profiler: auth: init [ 2.658910] THERMAL EST: found 3 subdevs [ 2.662044] THERMAL EST num_resources: 0 [ 2.666145] [THERMAL EST subdev 0] [ 2.669211] [THERMAL EST subdev 1] [ 2.672878] [THERMAL EST subdev 2] [ 2.675864] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.682310] THERMAL EST: thz register success. [ 2.686565] THERMAL EST: end of probe, return err: 0 [ 2.692178] nvsciipc: loaded module [ 2.699237] tun: Universal TUN/TAP device driver, 1.6 [ 2.701807] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.707643] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.713485] e1000e: Intel(R) PRO/1000 Network Driver [ 2.718121] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.724229] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.729753] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.736092] PPP generic driver version 2.4.2 [ 2.739970] PPP BSD Compression module registered [ 2.744730] PPP Deflate Compression module registered [ 2.749979] PPP MPPE Compression module registered [ 2.754742] usbcore: registered new interface driver r8152 [ 2.760510] usbcore: registered new interface driver asix [ 2.765579] usbcore: registered new interface driver ax88179_178a [ 2.771700] usbcore: registered new interface driver cdc_ether [ 2.777904] usbcore: registered new interface driver net1080 [ 2.783633] usbcore: registered new interface driver cdc_subset [ 2.789297] usbcore: registered new interface driver zaurus [ 2.795244] usbcore: registered new interface driver cdc_ncm [ 2.800928] usbcore: registered new interface driver aqc111 [ 2.806584] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.812385] ohci-pci: OHCI PCI platform driver [ 2.816937] ohci-platform: OHCI generic platform driver [ 2.822776] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.828874] usbcore: registered new interface driver uas [ 2.832985] usbcore: registered new interface driver usb-storage [ 2.839373] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.845144] mousedev: PS/2 mouse device common for all mice [ 2.850153] usbcore: registered new interface driver xpad [ 2.858146] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.860902] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.868921] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.875418] i2c /dev entries driver [ 2.878575] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.884398] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.890061] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.895372] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.900723] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.906246] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.911328] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.925010] device-mapper: uevent: version 1.0.3 [ 2.925526] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.931947] cpuidle: Initializing cpuidle driver [ 2.936028] sdhci: Secure Digital Host Controller Interface driver [ 2.940717] sdhci: Copyright(c) Pierre Ossman [ 2.944832] Synopsys Designware Multimedia Card Interface Driver [ 2.951020] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.956996] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.957798] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.970253] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.992580] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.002294] vdd-1v0: supplied by regulator-dummy [ 3.007892] vdd-1v8-hs: supplied by regulator-dummy [ 3.013069] vdd-1v8-ls: supplied by regulator-dummy [ 3.017970] vdd-1v8-ao: supplied by regulator-dummy [ 3.021982] vddio-ddr-1v1: supplied by regulator-dummy [ 3.026586] vdd-rtc: supplied by regulator-dummy [ 3.028404] spmic-ldo1: supplied by regulator-dummy [ 3.029708] vdd-ao-3v3: supplied by regulator-dummy [ 3.036016] vddio-emmc-3v3: supplied by regulator-dummy [ 3.042299] spmic-ldo4: supplied by regulator-dummy [ 3.043619] vdd-usb-3v3: supplied by regulator-dummy [ 3.049902] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.056085] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.061754] spmic-ldo8: supplied by vdd-1v8-ls [ 3.063220] gpio-510 (gpio_default): hogged as output/high [ 3.064593] gpio-511 (gpio_default): hogged as output/high [ 3.067544] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.203411] max77686-rtc max77620-rtc: registered as rtc0 [ 3.204793] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.205159] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.038857] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.040143] hid: raw HID events driver (C) Jiri Kosina [ 4.040932] usbcore: registered new interface driver usbhid [ 4.041080] usbhid: USB HID core driver [ 4.043289] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.044771] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.990656] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.064514] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.666 ms) ÿá[ 4.128953] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.129560] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.130563] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.131321] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.133267] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.134167] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.134867] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.136473] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.136719] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.139439] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.145874] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.152166] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.156716] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.162957] denver_knobs_init:MTS_VERSION:55637613 [ 4.174942] t19x_cache tegra-cache: probed [ 4.178032] optee: probing for conduit method. [ 4.178894] optee: revision 3.16 (65cc2218) [ 4.179951] optee: dynamic shared memory is enabled [ 4.183795] optee: initialized driver [ 4.190973] nvpmodel: initialized successfully [ 4.191778] tegra_hv: get_hvd: not initialized yet [ 4.195940] user_ivc_mempool: hypervisor not present [ 4.202333] usbcore: registered new interface driver snd-usb-audio [ 4.208603] u32 classifier [ 4.209959] input device check on [ 4.213773] Actions configured [ 4.217052] Initializing XFRM netlink socket [ 4.221862] NET: Registered protocol family 10 [ 4.229121] Segment Routing with IPv6 [ 4.229410] NET: Registered protocol family 17 [ 4.233861] NET: Registered protocol family 15 [ 4.238105] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.251917] Bluetooth: RFCOMM socket layer initialized [ 4.256509] Bluetooth: RFCOMM ver 1.11 [ 4.260160] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.266268] Bluetooth: HIDP socket layer initialized [ 4.271847] 9pnet: Installing 9P2000 support [ 4.275427] Key type dns_resolver registered [ 4.281204] registered taskstats version 1 [ 4.283981] Loading compiled-in X.509 certificates [ 4.298070] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.300149] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.310258] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.312117] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.320405] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.329024] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.443642] tegra194-pcie 14160000.pcie: Link up [ 4.446702] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.447134] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.447277] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.447597] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.447888] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.448457] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.448945] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.461481] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.462215] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.462804] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.464466] pci 0004:01:00.0: supports D1 D2 [ 4.464763] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.477599] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.477978] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.478345] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.478703] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.478964] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.479124] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.479304] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.485651] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.494365] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.504755] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.509225] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.514852] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.521549] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.530913] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.532104] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.540773] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.548991] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.664283] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.664759] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.664933] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.665069] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.665430] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.665723] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.666100] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.666646] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.686581] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.686911] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.688726] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.690129] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.691741] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.693147] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.694122] pci 0005:00:00.0: Removing from iommu group 7 [ 5.694361] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.727437] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.752683] host1x 13e10000.host1x: initialized [ 5.754339] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.755230] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.756629] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.757339] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.758472] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.759078] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.760348] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.760955] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.761818] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.764335] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.774092] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.781154] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.791317] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.798432] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.808255] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.815065] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.825254] falcon 15340000.vic: Adding to iommu group 17 [ 5.840263] falcon 15340000.vic: initialized [ 5.841260] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.846782] falcon 15380000.nvjpg: initialized [ 5.847318] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.857875] falcon 154c0000.nvenc: initialized [ 5.858598] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.868770] falcon 15a80000.nvenc1: initialized [ 5.869352] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.881308] nvdec 15480000.nvdec: initialized [ 5.881922] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.891847] nvdec 15140000.nvdec1: initialized [ 5.892432] tsec 15500000.tsec: Adding to iommu group 18 [ 5.898330] tsec 15500000.tsec: initialized [ 5.898903] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.905315] tsec 15100000.tsecb: initialized [ 5.909213] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.937454] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.950754] gpio-374 (wifi-enable): hogged as output/high [ 5.951066] gpio-431 (camera-control-output-low): hogged as output/low [ 5.951364] gpio-432 (camera-control-output-low): hogged as output/low [ 5.953019] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.954975] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.955498] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.957018] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.961703] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.967787] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.973212] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.981324] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.988957] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.000688] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.005750] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.011383] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.020441] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.029347] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.036760] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.044219] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.050758] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.060017] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.066306] pva 16000000.pva0: Adding to iommu group 22 [ 6.093502] pva 16000000.pva0: initialized [ 6.098550] pva 16800000.pva1: Adding to iommu group 23 [ 6.109589] pva 16800000.pva1: initialized [ 6.114144] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.128292] nvdla 15880000.nvdla0: initialized [ 6.129756] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.145976] nvdla 158c0000.nvdla1: initialized [ 6.150573] tegradc 15200000.display: Adding to iommu group 26 [ 6.150721] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.151105] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.152291] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.152595] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.152910] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.152935] tegradccommon 15200000.display-hub: dma mapping done [ 6.153979] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.155677] tegra_cec 3960000.tegra_cec: probed [ 6.159466] tegradc 15210000.display: Adding to iommu group 26 [ 6.159488] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.159665] generic_infoframe_type: 0x87 [ 6.159773] tegradc 15200000.display: DT parsed successfully [ 6.159906] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.161147] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.167927] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.173219] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.176821] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.176852] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.184156] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.191262] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.196371] kfuse 3830000.kfuse: initialized [ 6.204201] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.205763] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.211104] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.222500] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.226478] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.227094] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.234152] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.250080] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.262911] tegradc 15210000.display: disp0 connected to head1->sor [ 6.268869] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.274439] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.281404] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.286711] tegradc 15210000.display: DT parsed successfully [ 6.294807] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.302763] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.351104] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.371648] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.372145] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.373834] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.382622] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.391272] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.397901] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.405310] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.412645] usb usb1: Product: xHCI Host Controller [ 6.417271] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.423571] usb usb1: SerialNumber: 3610000.xhci [ 6.429172] hub 1-0:1.0: USB hub found [ 6.432476] hub 1-0:1.0: 4 ports detected [ 6.436977] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.441806] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.449144] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.456800] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.465010] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.472222] usb usb2: Product: xHCI Host Controller [ 6.476947] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.483194] usb usb2: SerialNumber: 3610000.xhci [ 6.488468] hub 2-0:1.0: USB hub found [ 6.491960] hub 2-0:1.0: 4 ports detected [ 6.535361] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.541866] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.543278] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.543436] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.556876] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.557930] tegra194-cpufreq ccplex: probed with BWMGR [ 6.559271] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.559756] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.560178] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.561547] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.566875] tegra194-vi5 15c10000.vi: initialized [ 6.568453] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.569735] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.571864] generic_infoframe_type: 0x87 [ 6.578650] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.582263] tegradc 15200000.display: DT parsed successfully [ 6.590336] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.590366] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.595996] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.602450] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.602457] mmc0: CQHCI version 5.10 [ 6.609603] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.617227] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.623335] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.635570] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.641818] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.650017] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.650026] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.657320] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.683730] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.684265] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.699475] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.699484] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.710490] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.715538] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.724440] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.731204] nvethernet 2490000.ethernet: Macsec not supported [ 6.745005] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.747536] tegradc 15200000.display: probed [ 6.753464] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.762482] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.769765] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.777796] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.785138] tegra-se-nvhost 15810000.se: initialized [ 6.786076] random: crng init done [ 6.796365] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.797814] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.804053] tegra-se-nvhost 15820000.se: initialized [ 6.810862] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.815063] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.821022] Console: switching to colour frame buffer device 240x67 [ 6.821404] tegra-se-nvhost 15830000.se: initialized [ 6.826829] tegradc 15200000.display: fb registered [ 6.833903] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.837049] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.843639] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.849624] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.855781] tegra-se-nvhost 15840000.se: initialized [ 6.861718] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.866107] mmc0: Command Queue Engine enabled [ 6.867662] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.869247] tegra_actmon d230000.actmon: in actmon_register()... [ 6.869433] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.869810] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.870110] hvc_sysfs: hypervisor is not present [ 6.895835] ALSA device list: [ 6.901568] mmc0: periodic cache flush enabled [ 6.901582] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.902166] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.906630] No soundcards found. [ 6.909605] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.913989] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.934493] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.935799] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.959536] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.964220] usb 1-2: Manufacturer: Generic [ 6.969308] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.970495] hub 1-2:1.0: USB hub found [ 6.978053] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.982088] hub 1-2:1.0: 4 ports detected [ 6.988374] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.989131] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.007620] Extcon AUX1(HDMI) enable [ 7.011476] tegradc 15210000.display: disp1 connected to head1->sor [ 7.017616] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.024817] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.024874] tegradc 15210000.display: DT parsed successfully [ 7.038169] tegradc 15210000.display: Display dc.00000000d6c79103 registered with id=1 [ 7.046402] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.052316] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.065267] tegradc 15210000.display: probed [ 7.065689] tegradc 15210000.display: fb registered [ 7.070808] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.074976] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.076941] Freeing unused kernel memory: 3968K [ 7.082506] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.087499] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.101084] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.101090] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.101093] usb 2-3: Manufacturer: Generic [ 7.101110] tegradc 15210000.display: blank - powerdown [ 7.103669] Run /init as init process [ 7.108649] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.134001] Extcon DP: HPD disabled [ 7.137669] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.144526] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.150301] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.161976] hub 2-3:1.0: USB hub found [ 7.164307] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.173521] tegradc 15200000.display: blank - powerdown [ 7.186430] Root device found: mmcblk0p1 [ 7.188506] Found dev node: /dev/mmcblk0p1 [ 7.195576] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.199559] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.219721] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.219726] Extcon AUX1(HDMI) disable [ 7.223279] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.242496] Rootfs mounted over mmcblk0p1 [ 7.243131] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.243982] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.257351] tegradc 15200000.display: unblank [ 7.258471] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.258668] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.264112] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.264118] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.264395] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.266374] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.270424] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.270428] Extcon AUX1(HDMI) enable [ 7.279084] Switching from initrd to actual rootfs [ 7.283184] tegradc 15200000.display: sync windows ret = 247 [ 7.321191] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.328586] Extcon HDMI: HPD enabled [ 7.331994] tegradc 15200000.display: hdmi: plugged [ 7.344873] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.346328] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.352566] usb 1-3: Product: Bluetooth Radio [ 7.357278] usb 1-3: Manufacturer: Realtek [ 7.361134] usb 1-3: SerialNumber: 00e04c000001 [ 7.419500] systemd[1]: System time before build time, advancing clock. [ 7.488136] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.493038] systemd[1]: Detected architecture arm64. [ 7.529719] systemd[1]: Set hostname to . [ 7.685654] systemd-sysv-generator[245]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.032102] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.033792] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.039585] systemd[1]: Created slice system-modprobe.slice. [ 8.044116] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.048216] systemd[1]: Created slice User and Session Slice. [ 8.051686] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.055859] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.059251] systemd[1]: Reached target User and Group Name Lookups. [ 8.062347] systemd[1]: Reached target Slices. [ 8.065340] systemd[1]: Reached target Swap. [ 8.069221] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.072775] systemd[1]: Listening on Syslog Socket. [ 8.076198] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.079446] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.083677] systemd[1]: Listening on Journal Audit Socket. [ 8.087129] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.090853] systemd[1]: Listening on Journal Socket. [ 8.094518] systemd[1]: Listening on udev Control Socket. [ 8.099414] systemd[1]: Listening on udev Kernel Socket. [ 8.109267] systemd[1]: Mounting Huge Pages File System... [ 8.117482] systemd[1]: Mounting POSIX Message Queue File System... [ 8.125252] systemd[1]: Mounting RPC Pipe File System... [ 8.133848] systemd[1]: Mounting Kernel Debug File System... [ 8.142244] systemd[1]: Mounting Kernel Trace File System... [ 8.152401] systemd[1]: Starting Journal Service... [ 8.161362] systemd[1]: Starting Set the console keyboard layout... [ 8.169362] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.172872] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.179069] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.186881] systemd[1]: Started Nameserver information manager. [ 8.191984] systemd[1]: Reached target Network (Pre). [ 8.198821] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.201193] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.208322] systemd[1]: Starting Load Kernel Modules... [ 8.216253] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.224710] systemd[1]: Starting udev Coldplug all Devices... [ 8.236315] systemd[1]: Mounted Huge Pages File System. [ 8.240334] systemd[1]: Mounted POSIX Message Queue File System. [ 8.243933] systemd[1]: Mounted RPC Pipe File System. [ 8.247628] systemd[1]: Mounted Kernel Debug File System. [ 8.248392] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.251346] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.251353] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.251361] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.251366] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.251679] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.251815] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.251986] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.251995] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.258368] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.274696] systemd[1]: Mounted Kernel Trace File System. [ 8.280817] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.286063] systemd[1]: nvfb-udev.service: Succeeded. [ 8.290861] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.303027] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.316630] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.318353] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.326136] systemd[1]: Starting Load/Save Random Seed... [ 8.334659] systemd[1]: Starting Create System Users... [ 8.340549] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.340549] [ 8.369757] systemd[1]: Finished Load Kernel Modules. [ 8.374677] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.382594] systemd[1]: Mounting Kernel Configuration File System... [ 8.390261] systemd[1]: Started OP-TEE Client Supplicant. [ 8.398186] systemd[1]: Starting Apply Kernel Variables... [ 8.409550] systemd[1]: Finished Load/Save Random Seed. [ 8.413677] systemd[1]: Mounted Kernel Configuration File System. [ 8.425461] systemd[1]: Finished Create System Users. [ 8.432428] systemd[1]: Finished Set the console keyboard layout. [ 9.881198] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.890398] imx219 9-0010: board setup failed [ 9.892054] imx219: probe of 9-0010 failed with error -121 [ 9.904935] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.911691] imx219 10-0010: board setup failed [ 9.913105] imx219: probe of 10-0010 failed with error -121 [ 9.988987] hot-surface-alert cooling state: 0 -> 1 [ 10.923025] using random self ethernet address [ 10.924782] using random host ethernet address [ 11.446227] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.447979] Creating 1 MTD partitions on "spi6.0": [ 11.449627] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.111844] using random self ethernet address [ 12.113416] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.860241] nvidia: loading out-of-tree module taints kernel. [ 58.253487] watchdog: watchdog0: watchdog did not stop! [ 58.729286] Trying to unregister non-registered hwtime source [ 61.786487] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.788021] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.327] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.361] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.340] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.341] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.342] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.342] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.343] I> dram_block larger than 80000000 [0002.345] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.357] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.360] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.591] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.211] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.250] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.263] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.308] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.321] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.330] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.379] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.388] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.417] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.427] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.482] I> register 'maxim' power off handle [0003.484] I> virtual i2c enabled [0003.484] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> hdmi cable connected [0003.613] W> set volts not configured for 'vdd-1v0' [0003.620] W> set volts not configured for 'vdd-1v8-hs' [0003.620] I> retrieved tmds range from prod_list_hdmi_soc [0003.627] E> invalid display type [0003.628] E> cannot find any other nvdisp nodes [0003.645] I> edid read success [0003.657] I> edid read success [0003.657] I> width = 640, height = 480, frequency = 25174825 [0003.658] I> width = 1920, height = 1080, frequency = 148500000 [0003.658] I> width = 1280, height = 768, frequency = 79500000 [0003.659] I> width = 1360, height = 768, frequency = 85500000 [0003.659] I> width = 720, height = 480, frequency = 26973026 [0003.663] I> width = 720, height = 576, frequency = 26973026 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1280, height = 720, frequency = 74175824 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 1920, height = 1080, frequency = 148351648 [0003.691] I> width = 720, height = 480, frequency = 26973026 [0003.697] I> width = 720, height = 576, frequency = 26973026 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 3840, height = 2160, frequency = 296703296 [0003.725] I> width = 4096, height = 2160, frequency = 296703296 [0003.731] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.742] I> hdmi_enable, starting HDMI initialisation [0003.747] I> hdmi_enable, HDMI initialisation complete [0003.756] initializing target [0003.757] calling apps_init() [0003.758] starting app kernel_boot_app [0003.758] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000825] Console: colour dummy device 80x25 [ 0.002179] printk: console [tty0] enabled [ 0.002241] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002277] pid_max: default: 32768 minimum: 301 [ 0.002465] LSM: Security Framework initializing [ 0.002525] Yama: becoming mindful. [ 0.002569] SELinux: Initializing. [ 0.002740] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002778] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006022] rcu: Hierarchical SRCU implementation. [ 0.006314] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007159] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007210] DTB Build time: Aug 10 2022 20:31:49 [ 0.010781] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011064] Remapping and enabling EFI services. [ 0.013726] smp: Bringing up secondary CPUs ... [ 0.043706] Detected PIPT I-cache on CPU1 [ 0.043787] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073359] Detected PIPT I-cache on CPU2 [ 0.073547] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103153] Detected PIPT I-cache on CPU3 [ 0.103321] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133029] Detected PIPT I-cache on CPU4 [ 0.133168] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162795] Detected PIPT I-cache on CPU5 [ 0.162918] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163315] smp: Brought up 1 node, 6 CPUs [ 0.163439] SMP: Total of 6 processors activated. [ 0.163503] CPU features: detected: Privileged Access Never [ 0.163528] CPU features: detected: LSE atomic instructions [ 0.163542] CPU features: detected: User Access Override [ 0.163558] CPU features: detected: 32-bit EL0 Support [ 0.163571] CPU features: detected: RAS Extension Support [ 0.163584] CPU features: detected: CRC32 instructions [ 0.163597] CPU features: detected: 32-bit EL1 Support [ 0.235802] CPU: All CPU(s) started at EL2 [ 0.241921] devtmpfs: initialized [ 0.290731] Registered cp15_barrier emulation handler [ 0.290834] Registered setend emulation handler [ 0.290858] KASLR enabled [ 0.291101] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291141] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292499] pinctrl core: initialized pinctrl subsystem [ 0.293509] SMBIOS 3.0.0 present. [ 0.293537] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294147] NET: Registered protocol family 16 [ 0.296107] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296601] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297349] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297405] audit: initializing netlink subsys (disabled) [ 0.297662] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.298083] thermal_sys: Registered thermal governor 'step_wise' [ 0.298090] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298104] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300354] cpuidle: using governor menu [ 0.300689] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.301069] ASID allocator initialised with 32768 entries [ 0.301316] Serial: AMBA PL011 UART driver [ 0.306399] Tegra reboot handler registered. [ 0.376217] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.376323] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.376488] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376530] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376655] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376695] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376824] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.376866] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376980] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.377020] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379480] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379517] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.379545] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379573] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379620] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379650] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379715] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379762] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379804] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379836] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379864] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379894] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379919] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379947] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379972] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.380000] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.380024] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.380134] mc-err: mcerr ops are set to t19x [ 0.392571] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392592] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.392604] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392616] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399706] ACPI: Interpreter disabled. [ 0.400865] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.402178] iommu: Default domain type: Translated [ 0.402243] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.402610] SCSI subsystem initialized [ 0.402769] usbcore: registered new interface driver usbfs [ 0.402813] usbcore: registered new interface driver hub [ 0.402883] usbcore: registered new device driver usb [ 0.403367] mc: Linux media interface: v0.10 [ 0.403400] videodev: Linux video capture interface: v2.00 [ 0.403776] pps_core: LinuxPPS API ver. 1 registered [ 0.403787] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403807] PTP clock support registered [ 0.404064] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404356] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.404443] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.405136] Registered efivars operations [ 0.411323] FPGA manager framework [ 0.411424] Advanced Linux Sound Architecture Driver Initialized. [ 0.412071] Bluetooth: Core ver 2.22 [ 0.412110] NET: Registered protocol family 31 [ 0.412122] Bluetooth: HCI device and connection manager initialized [ 0.412137] Bluetooth: HCI socket layer initialized [ 0.412151] Bluetooth: L2CAP socket layer initialized [ 0.412171] Bluetooth: SCO socket layer initialized [ 0.413787] camchar: rtcpu character device driver loaded [ 0.414549] clocksource: Switched to clocksource arch_sys_counter [ 0.697482] VFS: Disk quotas dquot_6.6.0 [ 0.697553] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.697881] pnp: PnP ACPI: disabled [ 0.709968] la/ptsa driver initialized. [ 0.710103] NET: Registered protocol family 2 [ 0.710287] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.715701] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.715765] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.716079] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.716510] TCP: Hash tables configured (established 65536 bind 65536) [ 0.716687] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.716778] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.716992] NET: Registered protocol family 1 [ 0.717581] RPC: Registered named UNIX socket transport module. [ 0.717595] RPC: Registered udp transport module. [ 0.717604] RPC: Registered tcp transport module. [ 0.717613] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.717626] PCI: CLS 0 bytes, default 64 [ 0.717829] Trying to unpack rootfs image as initramfs... [ 0.911332] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.913444] Freeing initrd memory: 8196K [ 0.917814] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.917844] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.917878] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.918362] kvm [1]: IPA Size Limit: 40 bits [ 0.918946] kvm [1]: vgic interrupt IRQ9 [ 0.919423] kvm [1]: VHE mode initialized successfully [ 0.920752] Initialise system trusted keyrings [ 0.920973] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.926398] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.927308] NFS: Registering the id_resolver key type [ 0.927337] Key type id_resolver registered [ 0.927346] Key type id_legacy registered [ 0.927441] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.927459] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.927486] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.936272] NET: Registered protocol family 38 [ 0.936292] Key type asymmetric registered [ 0.936303] Asymmetric key parser 'x509' registered [ 0.936358] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.936567] io scheduler mq-deadline registered [ 0.936581] io scheduler kyber registered [ 0.941279] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.943826] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.943896] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.943951] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.944006] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.944057] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.948913] scrncapt: init (heads:4 wins:6 planes:4) [ 0.949498] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.950216] EINJ: ACPI disabled. [ 0.952733] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.952758] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.952768] tegra-pmc: ### PMC reset level: L1 [ 0.952778] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.952818] tegra-pmc: PMC Prod config success [ 0.957796] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.441371] random: fast init done [ 2.508845] printk: console [ttyTCU0] enabled [ 2.514489] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.519518] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.523783] arm-smmu 10000000.iommu: stage 1 translation [ 2.529548] arm-smmu 10000000.iommu: stage 2 translation [ 2.534803] arm-smmu 10000000.iommu: nested translation [ 2.540424] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.547577] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.557730] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.560714] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.567004] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.574821] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.580061] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.584772] arm-smmu 12000000.iommu: stage 1 translation [ 2.590298] arm-smmu 12000000.iommu: stage 2 translation [ 2.595982] arm-smmu 12000000.iommu: nested translation [ 2.601177] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.608310] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.618343] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.621436] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.628258] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.635250] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.645610] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.648441] tegra_profiler: auth: init [ 2.652663] THERMAL EST: found 3 subdevs [ 2.656104] THERMAL EST num_resources: 0 [ 2.660197] [THERMAL EST subdev 0] [ 2.663512] [THERMAL EST subdev 1] [ 2.666667] [THERMAL EST subdev 2] [ 2.670156] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.676558] THERMAL EST: thz register success. [ 2.680864] THERMAL EST: end of probe, return err: 0 [ 2.685778] nvsciipc: loaded module [ 2.692524] tun: Universal TUN/TAP device driver, 1.6 [ 2.695605] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.701681] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.707507] e1000e: Intel(R) PRO/1000 Network Driver [ 2.712163] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.718487] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.723808] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.729672] PPP generic driver version 2.4.2 [ 2.734004] PPP BSD Compression module registered [ 2.738772] PPP Deflate Compression module registered [ 2.744016] PPP MPPE Compression module registered [ 2.748785] usbcore: registered new interface driver r8152 [ 2.754292] usbcore: registered new interface driver asix [ 2.759613] usbcore: registered new interface driver ax88179_178a [ 2.765735] usbcore: registered new interface driver cdc_ether [ 2.771942] usbcore: registered new interface driver net1080 [ 2.777290] usbcore: registered new interface driver cdc_subset [ 2.783611] usbcore: registered new interface driver zaurus [ 2.789290] usbcore: registered new interface driver cdc_ncm [ 2.794952] usbcore: registered new interface driver aqc111 [ 2.800576] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.806717] ohci-pci: OHCI PCI platform driver [ 2.810974] ohci-platform: OHCI generic platform driver [ 2.816653] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.822869] usbcore: registered new interface driver uas [ 2.827012] usbcore: registered new interface driver usb-storage [ 2.833108] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.839072] mousedev: PS/2 mouse device common for all mice [ 2.844444] usbcore: registered new interface driver xpad [ 2.852143] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.854915] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.862726] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.869432] i2c /dev entries driver [ 2.872554] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.878287] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.883912] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.889323] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.894693] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.900172] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.905615] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.917625] device-mapper: uevent: version 1.0.3 [ 2.918043] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.925601] cpuidle: Initializing cpuidle driver [ 2.929748] sdhci: Secure Digital Host Controller Interface driver [ 2.934527] sdhci: Copyright(c) Pierre Ossman [ 2.938624] Synopsys Designware Multimedia Card Interface Driver [ 2.944768] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.951114] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.951613] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.964192] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.982385] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.991143] vdd-1v0: supplied by regulator-dummy [ 2.996454] vdd-1v8-hs: supplied by regulator-dummy [ 3.001078] vdd-1v8-ls: supplied by regulator-dummy [ 3.005742] vdd-1v8-ao: supplied by regulator-dummy [ 3.009477] vddio-ddr-1v1: supplied by regulator-dummy [ 3.013792] vdd-rtc: supplied by regulator-dummy [ 3.015341] spmic-ldo1: supplied by regulator-dummy [ 3.016503] vdd-ao-3v3: supplied by regulator-dummy [ 3.022485] vddio-emmc-3v3: supplied by regulator-dummy [ 3.028665] spmic-ldo4: supplied by regulator-dummy [ 3.029862] vdd-usb-3v3: supplied by regulator-dummy [ 3.035903] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.041941] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.047333] spmic-ldo8: supplied by vdd-1v8-ls [ 3.048646] gpio-510 (gpio_default): hogged as output/high [ 3.050778] gpio-511 (gpio_default): hogged as output/high [ 3.057879] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.196128] max77686-rtc max77620-rtc: registered as rtc0 [ 3.197110] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.197386] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.901550] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.902627] hid: raw HID events driver (C) Jiri Kosina [ 3.903242] usbcore: registered new interface driver usbhid [ 3.903386] usbhid: USB HID core driver [ 3.905091] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.906171] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.874441] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.950074] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 76.442 ms) ÿá[ 3.991265] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.991838] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.992806] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.993472] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.995226] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.995807] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.996345] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.997515] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.997850] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.999904] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.007940] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.014461] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.019404] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.025639] denver_knobs_init:MTS_VERSION:55637613 [ 4.037351] t19x_cache tegra-cache: probed [ 4.039790] optee: probing for conduit method. [ 4.040572] optee: revision 3.16 (65cc2218) [ 4.041653] optee: dynamic shared memory is enabled [ 4.046261] optee: initialized driver [ 4.054122] nvpmodel: initialized successfully [ 4.054996] tegra_hv: get_hvd: not initialized yet [ 4.058520] user_ivc_mempool: hypervisor not present [ 4.065232] usbcore: registered new interface driver snd-usb-audio [ 4.071415] u32 classifier [ 4.072373] input device check on [ 4.076081] Actions configured [ 4.080035] Initializing XFRM netlink socket [ 4.085084] NET: Registered protocol family 10 [ 4.091862] Segment Routing with IPv6 [ 4.092213] NET: Registered protocol family 17 [ 4.096270] NET: Registered protocol family 15 [ 4.100991] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.114198] Bluetooth: RFCOMM socket layer initialized [ 4.118919] Bluetooth: RFCOMM ver 1.11 [ 4.123041] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.128628] Bluetooth: HIDP socket layer initialized [ 4.135062] 9pnet: Installing 9P2000 support [ 4.138279] Key type dns_resolver registered [ 4.144408] registered taskstats version 1 [ 4.146481] Loading compiled-in X.509 certificates [ 4.160440] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.162286] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.172980] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.174763] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.182997] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.191639] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.306689] tegra194-pcie 14160000.pcie: Link up [ 4.309556] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.309789] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.310006] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.310317] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.310575] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.310973] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.311478] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.324736] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.325285] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.325850] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.327482] pci 0004:01:00.0: supports D1 D2 [ 4.327667] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.340499] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.340879] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.341204] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.341760] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.342024] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.342278] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.342702] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.348686] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.357424] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.367944] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.372437] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.378051] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.384543] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.393918] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.395383] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.403556] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.412269] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.527159] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.527783] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.527985] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.528173] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.528439] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.528631] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.529012] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.529416] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.546784] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.547083] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.548575] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.549556] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.550997] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.552180] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.553014] pci 0005:00:00.0: Removing from iommu group 7 [ 5.553417] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.587502] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.611683] host1x 13e10000.host1x: initialized [ 5.613445] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.614500] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.616156] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.617417] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.619028] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.619926] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.620969] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.621703] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.622825] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.627417] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.637393] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.644144] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.654147] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.661360] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.671195] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.678297] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.687974] falcon 15340000.vic: Adding to iommu group 17 [ 5.703104] falcon 15340000.vic: initialized [ 5.704051] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.709828] falcon 15380000.nvjpg: initialized [ 5.710465] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.721281] falcon 154c0000.nvenc: initialized [ 5.721867] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.731826] falcon 15a80000.nvenc1: initialized [ 5.732409] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.744205] nvdec 15480000.nvdec: initialized [ 5.744876] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.754103] nvdec 15140000.nvdec1: initialized [ 5.754663] tsec 15500000.tsec: Adding to iommu group 18 [ 5.760294] tsec 15500000.tsec: initialized [ 5.760760] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.768474] tsec 15100000.tsecb: initialized [ 5.772390] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.800534] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.813006] gpio-374 (wifi-enable): hogged as output/high [ 5.813330] gpio-431 (camera-control-output-low): hogged as output/low [ 5.813695] gpio-432 (camera-control-output-low): hogged as output/low [ 5.815385] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.817562] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.818188] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.819575] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.824607] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.830737] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.836481] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.844361] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.851879] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.862966] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.868290] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.874160] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.883364] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.892346] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.899813] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.907399] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.913365] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.923236] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.929458] pva 16000000.pva0: Adding to iommu group 22 [ 5.956694] pva 16000000.pva0: initialized [ 5.961166] pva 16800000.pva1: Adding to iommu group 23 [ 5.980210] pva 16800000.pva1: initialized [ 5.984581] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.997790] nvdla 15880000.nvdla0: initialized [ 5.999250] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.008415] nvdla 158c0000.nvdla1: initialized [ 6.010696] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.010955] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.011434] tegradccommon 15200000.display-hub: dma mapping done [ 6.013584] tegradc 15200000.display: Adding to iommu group 26 [ 6.022401] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.023095] generic_infoframe_type: 0x87 [ 6.023419] tegradc 15200000.display: DT parsed successfully [ 6.023848] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.023871] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.025379] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.025899] tegradc 15210000.display: Adding to iommu group 26 [ 6.028212] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.028225] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.028230] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.029389] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.029398] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.031606] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.031706] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.036847] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.037779] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.046101] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.110928] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.112523] tegradc 15210000.display: disp0 connected to head1->sor [ 6.115988] tegra_cec 3960000.tegra_cec: probed [ 6.116988] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.122687] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.129785] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.133201] tegradc 15210000.display: DT parsed successfully [ 6.140721] kfuse 3830000.kfuse: initialized [ 6.146941] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.165477] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.171047] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.178322] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.184282] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.193996] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.199298] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.208487] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.213877] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.234303] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.234767] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.237301] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.245164] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.254185] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.260469] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.268330] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.275527] usb usb1: Product: xHCI Host Controller [ 6.280452] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.286495] usb usb1: SerialNumber: 3610000.xhci [ 6.292185] hub 1-0:1.0: USB hub found [ 6.295418] hub 1-0:1.0: 4 ports detected [ 6.300058] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.304473] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.312333] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.320153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.327938] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.335355] usb usb2: Product: xHCI Host Controller [ 6.340170] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.346356] usb usb2: SerialNumber: 3610000.xhci [ 6.352030] hub 2-0:1.0: USB hub found [ 6.354664] hub 2-0:1.0: 4 ports detected [ 6.397376] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.403228] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.404646] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.404858] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.417825] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.418963] tegra194-cpufreq ccplex: probed with BWMGR [ 6.420296] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.420772] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.421248] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.422523] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.432101] mmc0: CQHCI version 5.10 [ 6.432123] tegra194-vi5 15c10000.vi: initialized [ 6.433993] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.434859] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.438704] generic_infoframe_type: 0x87 [ 6.445169] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.448707] tegradc 15200000.display: DT parsed successfully [ 6.456983] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.462494] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.469007] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.469014] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.478365] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.483645] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.490621] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.498515] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.502500] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.504879] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.504885] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.540831] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.541847] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.549125] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.558578] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.562805] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.563025] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.569454] nvethernet 2490000.ethernet: Macsec not supported [ 6.570841] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.576943] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.587223] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.591560] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.599764] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.617723] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.617903] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.620621] ************************************** [ 6.620626] CPU:0, Error:cbb-noc [ 6.620629] Error Logger : 0 [ 6.620640] ErrLog0 : 0x80030000 [ 6.620643] Transaction Type : RD - Read, Incrementing [ 6.620646] Error Code : SLV [ 6.620655] Error Source : Target [ 6.628954] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.632347] Error Description : Target error detected by CBB slave [ 6.632359] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.632364] Packet header Lock : 0 [ 6.690624] Packet header Len1 : 3 [ 6.694208] NOC protocol version : version >= 2.7 [ 6.698940] ErrLog1 : 0x352420 [ 6.702351] ErrLog2 : 0x0 [ 6.705239] RouteId : 0x352420 [ 6.708842] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.713376] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.718358] TargSubRange : 18 [ 6.721339] SeqId : 0 [ 6.724484] ErrLog3 : 0x4045c [ 6.727896] ErrLog4 : 0x0 [ 6.730352] Address accessed : 0x15b4045c [ 6.734813] ErrLog5 : 0x809f851 [ 6.738226] Non-Modify : 0x1 [ 6.741465] AXI ID : 0x10 [ 6.744871] Master ID : CCPLEX [ 6.748196] Security Group(GRPSEC): 0x7e [ 6.752397] Cache : 0x1 -- Bufferable [ 6.756598] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.763163] FALCONSEC : 0x0 [ 6.766314] Virtual Queuing Channel(VQC): 0x0 [ 6.771210] ************************************** [ 6.776251] ------------[ cut here ]------------ [ 6.780488] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.787312] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.792302] Modules linked in: [ 6.795537] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 6.802183] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.814439] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.820222] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 6.825199] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 6.829680] sp : ffff800010003de0 [ 6.833341] x29: ffff800010003de0 x28: 0000000000000001 [ 6.838778] x27: 0000000000000005 x26: ffffc70a3ec73f58 [ 6.844184] x25: ffffc70a3f5cce10 x24: 0000000000000001 [ 6.849352] x23: ffffc70a3ef67000 x22: ffffc70a3f3eea00 [ 6.854945] x21: 000000000000000f x20: ffff4de0c0ea5e80 [ 6.860460] x19: ffffc70a3f3eea00 x18: 0000000000000010 [ 6.865625] x17: ffff800010895000 x16: 0000000000000000 [ 6.871220] x15: ffffc70a3f262bf0 x14: 0720072007200720 [ 6.876476] x13: 0720072007200720 x12: 0720072007200720 [ 6.881990] x11: 0720072007200720 x10: 0720072007200720 [ 6.887762] x9 : 0720072007200720 x8 : 07200720072a072a [ 6.893287] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 6.898784] x5 : 0000000000057fa8 x4 : ffffc70a3f277968 [ 6.903951] x3 : 00000000ffffffff x2 : ffffc70a3d70e090 [ 6.909547] x1 : ffffc70a3f262680 x0 : 0000000000010001 [ 6.914891] Call trace: [ 6.917355] tegra194_cbb_err_isr+0x190/0x1b0 [ 6.921370] __handle_irq_event_percpu+0x68/0x2a0 [ 6.926192] handle_irq_event_percpu+0x40/0xa0 [ 6.930379] handle_irq_event+0x50/0xf0 [ 6.934143] handle_fasteoi_irq+0xc0/0x170 [ 6.938425] generic_handle_irq+0x40/0x60 [ 6.942193] __handle_domain_irq+0x70/0xd0 [ 6.946394] efi_header_end+0xb0/0xf0 [ 6.949890] el1_irq+0xd0/0x180 [ 6.952886] cpuidle_enter_state+0xb8/0x410 [ 6.957323] cpuidle_enter+0x40/0x60 [ 6.960823] call_cpuidle+0x44/0x80 [ 6.964323] do_idle+0x208/0x270 [ 6.967737] cpu_startup_entry+0x30/0x70 [ 6.971260] rest_init+0xdc/0xe8 [ 6.974483] arch_call_rest_init+0x18/0x20 [ 6.978954] start_kernel+0x514/0x54c [ 6.982012] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 6.988240] ---[ end trace f8a54536d108f38e ]--- [ 6.992939] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.000723] SMP: stopping secondary CPUs [ 7.004596] Kernel Offset: 0x470a2d550000 from 0xffff800010000000 [ 7.010696] PHYS_OFFSET: 0xffffb22040000000 [ 7.014810] CPU features: 0x8240002,03802a30 [ 7.019014] Memory Limit: none [ 7.022425] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 67500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.029] > DEVICE_PROD: device prod is not initialized. [0002.335] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.336] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.336] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.337] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.337] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.338] I> dram_block larger than 80000000 [0002.340] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.351] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.355] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.585] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 03ÿâclk_dt_late initialized ÿä:ÿânoc_late initialized pm_post initialized dbells initialized ÿä23:2ÿâdmce initialized cvc initialized ÿä0 UTC 2022 aÿâavfs_clk_mach_post initialized ÿäarch6ÿâavfs_clk_platform_post initialized ÿä4 ÿâcvc_late initialized regulator_post initialized ÿä I/ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäTC: WARNING: This OP-TEE configuration mighÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿät be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.569] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> hdmi cable connected [0003.610] W> set volts not configured for 'vdd-1v0' [0003.616] W> set volts not configured for 'vdd-1v8-hs' [0003.617] I> retrieved tmds range from prod_list_hdmi_soc [0003.624] E> invalid display type [0003.626] E> cannot find any other nvdisp nodes [0003.642] I> edid read success [0003.655] I> edid read success [0003.655] I> width = 640, height = 480, frequency = 25174825 [0003.655] I> width = 1920, height = 1080, frequency = 148500000 [0003.656] I> width = 1280, height = 768, frequency = 79500000 [0003.656] I> width = 1360, height = 768, frequency = 85500000 [0003.657] I> width = 720, height = 480, frequency = 26973026 [0003.661] I> width = 720, height = 576, frequency = 26973026 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1280, height = 720, frequency = 74175824 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 1920, height = 1080, frequency = 148351648 [0003.689] I> width = 720, height = 480, frequency = 26973026 [0003.694] I> width = 720, height = 576, frequency = 26973026 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 3840, height = 2160, frequency = 296703296 [0003.723] I> width = 4096, height = 2160, frequency = 296703296 [0003.729] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.740] I> hdmi_enable, starting HDMI initialisation [0003.745] I> hdmi_enable, HDMI initialisation complete [0003.754] initializing target [0003.755] calling apps_init() [0003.756] starting app kernel_boot_app [0003.756] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000670] Console: colour dummy device 80x25 [ 0.002134] printk: console [tty0] enabled [ 0.002197] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002232] pid_max: default: 32768 minimum: 301 [ 0.002407] LSM: Security Framework initializing [ 0.002478] Yama: becoming mindful. [ 0.002524] SELinux: Initializing. [ 0.002699] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002739] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005606] rcu: Hierarchical SRCU implementation. [ 0.005876] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006811] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006861] DTB Build time: Aug 10 2022 20:31:49 [ 0.009737] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010042] Remapping and enabling EFI services. [ 0.012057] smp: Bringing up secondary CPUs ... [ 0.041928] Detected PIPT I-cache on CPU1 [ 0.042030] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075970] Detected PIPT I-cache on CPU2 [ 0.076050] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105697] Detected PIPT I-cache on CPU3 [ 0.105786] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135585] Detected PIPT I-cache on CPU4 [ 0.135736] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165593] Detected PIPT I-cache on CPU5 [ 0.165769] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166193] smp: Brought up 1 node, 6 CPUs [ 0.166518] SMP: Total of 6 processors activated. [ 0.166543] CPU features: detected: Privileged Access Never [ 0.166566] CPU features: detected: LSE atomic instructions [ 0.166589] CPU features: detected: User Access Override [ 0.166613] CPU features: detected: 32-bit EL0 Support [ 0.166636] CPU features: detected: RAS Extension Support [ 0.166659] CPU features: detected: CRC32 instructions [ 0.166682] CPU features: detected: 32-bit EL1 Support [ 0.238458] CPU: All CPU(s) started at EL2 [ 0.245463] devtmpfs: initialized [ 0.293010] Registered cp15_barrier emulation handler [ 0.293161] Registered setend emulation handler [ 0.293209] KASLR enabled [ 0.293500] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.293537] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.294918] pinctrl core: initialized pinctrl subsystem [ 0.295843] SMBIOS 3.0.0 present. [ 0.295887] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.296553] NET: Registered protocol family 16 [ 0.298498] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.299002] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.299741] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.299810] audit: initializing netlink subsys (disabled) [ 0.300090] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.300489] thermal_sys: Registered thermal governor 'step_wise' [ 0.300496] thermal_sys: Registered thermal governor 'power_allocator' [ 0.300516] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.302692] cpuidle: using governor menu [ 0.303026] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.303412] ASID allocator initialised with 32768 entries [ 0.303656] Serial: AMBA PL011 UART driver [ 0.306810] Tegra reboot handler registered. [ 0.382113] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.382248] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.382421] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.382466] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.382590] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.382641] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.382773] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.382819] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.382937] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.382981] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.385112] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.385152] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.385183] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.385215] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.385247] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.385277] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.385320] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.385355] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.385382] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.385408] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.385434] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.385460] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.385485] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.385511] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.385537] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.385562] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.385588] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.385682] mc-err: mcerr ops are set to t19x [ 0.398131] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.398155] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.398168] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.398180] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.405329] ACPI: Interpreter disabled. [ 0.406712] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.408081] iommu: Default domain type: Translated [ 0.408146] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.408509] SCSI subsystem initialized [ 0.408714] usbcore: registered new interface driver usbfs [ 0.408759] usbcore: registered new interface driver hub [ 0.408799] usbcore: registered new device driver usb [ 0.409208] mc: Linux media interface: v0.10 [ 0.409237] videodev: Linux video capture interface: v2.00 [ 0.409542] pps_core: LinuxPPS API ver. 1 registered [ 0.409554] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.409574] PTP clock support registered [ 0.409782] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.410108] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.410195] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.410796] Registered efivars operations [ 0.416171] FPGA manager framework [ 0.416276] Advanced Linux Sound Architecture Driver Initialized. [ 0.416858] Bluetooth: Core ver 2.22 [ 0.416896] NET: Registered protocol family 31 [ 0.416911] Bluetooth: HCI device and connection manager initialized [ 0.416926] Bluetooth: HCI socket layer initialized [ 0.416941] Bluetooth: L2CAP socket layer initialized [ 0.416963] Bluetooth: SCO socket layer initialized [ 0.418806] camchar: rtcpu character device driver loaded [ 0.419503] clocksource: Switched to clocksource arch_sys_counter [ 0.718251] VFS: Disk quotas dquot_6.6.0 [ 0.718320] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.718628] pnp: PnP ACPI: disabled [ 0.731752] la/ptsa driver initialized. [ 0.731889] NET: Registered protocol family 2 [ 0.732048] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.736628] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.736704] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.737028] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.737452] TCP: Hash tables configured (established 65536 bind 65536) [ 0.737619] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.737720] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.737910] NET: Registered protocol family 1 [ 0.738548] RPC: Registered named UNIX socket transport module. [ 0.738563] RPC: Registered udp transport module. [ 0.738572] RPC: Registered tcp transport module. [ 0.738582] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.738597] PCI: CLS 0 bytes, default 64 [ 0.738800] Trying to unpack rootfs image as initramfs... [ 0.927403] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.929622] Freeing initrd memory: 8196K [ 0.933583] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.933619] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.933653] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.934090] kvm [1]: IPA Size Limit: 40 bits [ 0.934620] kvm [1]: vgic interrupt IRQ9 [ 0.935175] kvm [1]: VHE mode initialized successfully [ 0.936895] Initialise system trusted keyrings [ 0.937206] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.945215] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.946129] NFS: Registering the id_resolver key type [ 0.946166] Key type id_resolver registered [ 0.946180] Key type id_legacy registered [ 0.946280] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.946303] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.946364] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.957738] NET: Registered protocol family 38 [ 0.957760] Key type asymmetric registered [ 0.957775] Asymmetric key parser 'x509' registered [ 0.957826] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.958057] io scheduler mq-deadline registered [ 0.958075] io scheduler kyber registered [ 0.965044] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.968551] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.968655] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.968755] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.968833] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.968903] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.975044] scrncapt: init (heads:4 wins:6 planes:4) [ 0.975365] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.976300] EINJ: ACPI disabled. [ 0.979858] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.979884] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 0.979898] tegra-pmc: ### PMC reset level: L1 [ 0.979912] tegra-pmc: ### PMC reset status reg: 0x9 [ 0.979973] tegra-pmc: PMC Prod config success [ 0.985669] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.991381] random: fast init done [ 0.991878] printk: console [ttyTCU0] enabled [ 2.543790] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.547471] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.552359] arm-smmu 10000000.iommu: stage 1 translation [ 2.557884] arm-smmu 10000000.iommu: stage 2 translation [ 2.563080] arm-smmu 10000000.iommu: nested translation [ 2.568416] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.575588] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.587324] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.588975] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.595788] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.603436] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.608825] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.613554] arm-smmu 12000000.iommu: stage 1 translation [ 2.618805] arm-smmu 12000000.iommu: stage 2 translation [ 2.624237] arm-smmu 12000000.iommu: nested translation [ 2.629944] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.637101] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.648454] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.650187] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.656777] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.664065] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.674284] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.677254] tegra_profiler: auth: init [ 2.681255] THERMAL EST: found 3 subdevs [ 2.684617] THERMAL EST num_resources: 0 [ 2.688737] [THERMAL EST subdev 0] [ 2.691778] [THERMAL EST subdev 1] [ 2.695168] [THERMAL EST subdev 2] [ 2.698698] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.705214] THERMAL EST: thz register success. [ 2.709173] THERMAL EST: end of probe, return err: 0 [ 2.714745] nvsciipc: loaded module [ 2.722346] tun: Universal TUN/TAP device driver, 1.6 [ 2.724283] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.730197] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.736042] e1000e: Intel(R) PRO/1000 Network Driver [ 2.740701] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.746785] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.752066] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.758575] PPP generic driver version 2.4.2 [ 2.762841] PPP BSD Compression module registered [ 2.767043] PPP Deflate Compression module registered [ 2.772285] PPP MPPE Compression module registered [ 2.777307] usbcore: registered new interface driver r8152 [ 2.782813] usbcore: registered new interface driver asix [ 2.788207] usbcore: registered new interface driver ax88179_178a [ 2.794272] usbcore: registered new interface driver cdc_ether [ 2.800245] usbcore: registered new interface driver net1080 [ 2.805843] usbcore: registered new interface driver cdc_subset [ 2.811909] usbcore: registered new interface driver zaurus [ 2.817840] usbcore: registered new interface driver cdc_ncm [ 2.823524] usbcore: registered new interface driver aqc111 [ 2.828917] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.834956] ohci-pci: OHCI PCI platform driver [ 2.839252] ohci-platform: OHCI generic platform driver [ 2.845241] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.851672] usbcore: registered new interface driver uas [ 2.855562] usbcore: registered new interface driver usb-storage [ 2.861745] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.868114] mousedev: PS/2 mouse device common for all mice [ 2.872705] usbcore: registered new interface driver xpad [ 2.881257] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.883424] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.891546] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.897798] i2c /dev entries driver [ 2.901425] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.907019] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.912392] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.917918] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.923630] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.928763] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.934167] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.949226] device-mapper: uevent: version 1.0.3 [ 2.949730] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.954919] cpuidle: Initializing cpuidle driver [ 2.958750] sdhci: Secure Digital Host Controller Interface driver [ 2.963057] sdhci: Copyright(c) Pierre Ossman [ 2.967408] Synopsys Designware Multimedia Card Interface Driver [ 2.973347] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.979741] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.980420] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.992872] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.017022] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.026767] vdd-1v0: supplied by regulator-dummy [ 3.032615] vdd-1v8-hs: supplied by regulator-dummy [ 3.037511] vdd-1v8-ls: supplied by regulator-dummy [ 3.042426] vdd-1v8-ao: supplied by regulator-dummy [ 3.046530] vddio-ddr-1v1: supplied by regulator-dummy [ 3.051084] vdd-rtc: supplied by regulator-dummy [ 3.053082] spmic-ldo1: supplied by regulator-dummy [ 3.054409] vdd-ao-3v3: supplied by regulator-dummy [ 3.060814] vddio-emmc-3v3: supplied by regulator-dummy [ 3.067254] spmic-ldo4: supplied by regulator-dummy [ 3.068583] vdd-usb-3v3: supplied by regulator-dummy [ 3.074888] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.081309] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.087017] spmic-ldo8: supplied by vdd-1v8-ls [ 3.088781] gpio-510 (gpio_default): hogged as output/high [ 3.090185] gpio-511 (gpio_default): hogged as output/high [ 3.093170] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.229236] max77686-rtc max77620-rtc: registered as rtc0 [ 3.230677] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.231086] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.062539] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.064082] hid: raw HID events driver (C) Jiri Kosina [ 4.065030] usbcore: registered new interface driver usbhid [ 4.065180] usbhid: USB HID core driver [ 4.067282] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.068707] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.876413] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.950495] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.777 ms, total boot 74.889 ms) ÿá[ 4.152511] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.153219] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.154580] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.155819] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.158156] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.158954] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.159795] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.161334] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.161747] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.163970] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.169029] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.175318] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.180729] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.186767] denver_knobs_init:MTS_VERSION:55637613 [ 4.200114] t19x_cache tegra-cache: probed [ 4.204848] optee: probing for conduit method. [ 4.205768] optee: revision 3.16 (65cc2218) [ 4.207473] optee: dynamic shared memory is enabled [ 4.208968] optee: initialized driver [ 4.214733] nvpmodel: initialized successfully [ 4.215393] tegra_hv: get_hvd: not initialized yet [ 4.219993] user_ivc_mempool: hypervisor not present [ 4.225943] usbcore: registered new interface driver snd-usb-audio [ 4.232336] u32 classifier [ 4.233689] input device check on [ 4.237351] Actions configured [ 4.240712] Initializing XFRM netlink socket [ 4.245614] NET: Registered protocol family 10 [ 4.252341] Segment Routing with IPv6 [ 4.252973] NET: Registered protocol family 17 [ 4.257564] NET: Registered protocol family 15 [ 4.261781] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.275170] Bluetooth: RFCOMM socket layer initialized [ 4.280234] Bluetooth: RFCOMM ver 1.11 [ 4.283900] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.289943] Bluetooth: HIDP socket layer initialized [ 4.295813] 9pnet: Installing 9P2000 support [ 4.299332] Key type dns_resolver registered [ 4.304861] registered taskstats version 1 [ 4.307625] Loading compiled-in X.509 certificates [ 4.321575] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.323480] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.334411] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.335799] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.344068] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.352694] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.467667] tegra194-pcie 14160000.pcie: Link up [ 4.470503] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.470697] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.470837] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.471110] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.471359] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.471792] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.472243] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.484293] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.484774] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.485338] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.486968] pci 0004:01:00.0: supports D1 D2 [ 4.487166] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.498279] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.498562] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.498819] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.499275] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.499774] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.500008] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.502259] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.509716] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.518219] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.528732] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.533269] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.538899] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.545573] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.555816] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.556208] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.564886] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.573170] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.688428] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.689141] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.689409] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.689589] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.690028] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.690271] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.690743] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.691199] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.712019] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.712338] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.714383] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.716169] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.717995] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.720048] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.721176] pci 0005:00:00.0: Removing from iommu group 7 [ 5.721438] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.758643] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.785718] host1x 13e10000.host1x: initialized [ 5.787804] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.788866] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.790343] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.791223] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.792818] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.793708] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.795056] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.796033] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.797232] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.798023] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.798979] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.805775] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.815804] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.822918] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.832664] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.839433] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.849310] falcon 15340000.vic: Adding to iommu group 17 [ 5.866550] falcon 15340000.vic: initialized [ 5.867978] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.874490] falcon 15380000.nvjpg: initialized [ 5.875275] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.884943] falcon 154c0000.nvenc: initialized [ 5.885902] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.894680] falcon 15a80000.nvenc1: initialized [ 5.895401] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.905827] nvdec 15480000.nvdec: initialized [ 5.906465] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.916503] nvdec 15140000.nvdec1: initialized [ 5.917178] tsec 15500000.tsec: Adding to iommu group 18 [ 5.922907] tsec 15500000.tsec: initialized [ 5.923440] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.930000] tsec 15100000.tsecb: initialized [ 5.935158] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.963355] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.977615] gpio-374 (wifi-enable): hogged as output/high [ 5.977899] gpio-431 (camera-control-output-low): hogged as output/low [ 5.978313] gpio-432 (camera-control-output-low): hogged as output/low [ 5.980319] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.982797] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.983416] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.985214] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.986814] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.992190] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.997334] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.005881] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.012990] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.025070] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.029971] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.035553] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.044384] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.053844] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.061211] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.068557] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.074964] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.084379] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.090834] pva 16000000.pva0: Adding to iommu group 22 [ 6.118086] pva 16000000.pva0: initialized [ 6.122884] pva 16800000.pva1: Adding to iommu group 23 [ 6.135231] pva 16800000.pva1: initialized [ 6.140361] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.154709] nvdla 15880000.nvdla0: initialized [ 6.156128] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.173007] nvdla 158c0000.nvdla1: initialized [ 6.175278] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.175653] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.176052] tegradccommon 15200000.display-hub: dma mapping done [ 6.178188] tegradc 15200000.display: Adding to iommu group 26 [ 6.186901] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.187289] generic_infoframe_type: 0x87 [ 6.188473] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.188807] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.189586] tegradc 15200000.display: DT parsed successfully [ 6.189971] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.190495] tegradc 15210000.display: Adding to iommu group 26 [ 6.192699] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.196957] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.196974] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.196982] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.197886] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.197900] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.199343] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.204650] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.216667] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.221254] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.229705] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.234918] tegra_cec 3960000.tegra_cec: probed [ 6.235997] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.243493] tegradc 15210000.display: disp0 connected to head1->sor [ 6.254678] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.258603] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.265492] kfuse 3830000.kfuse: initialized [ 6.270817] tegradc 15210000.display: DT parsed successfully [ 6.278081] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.282167] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.332421] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.339897] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.345978] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.355348] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.360275] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.369740] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.375085] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.395671] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.396052] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.398344] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.406877] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.415576] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.422251] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.429615] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.436516] usb usb1: Product: xHCI Host Controller [ 6.441774] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.448042] usb usb1: SerialNumber: 3610000.xhci [ 6.453800] hub 1-0:1.0: USB hub found [ 6.456692] hub 1-0:1.0: 4 ports detected [ 6.461104] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.465749] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.473612] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.481462] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.488986] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.496433] usb usb2: Product: xHCI Host Controller [ 6.501148] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.507659] usb usb2: SerialNumber: 3610000.xhci [ 6.512837] hub 2-0:1.0: USB hub found [ 6.515851] hub 2-0:1.0: 4 ports detected [ 6.560605] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.566625] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.568418] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.568620] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.582058] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.583153] tegra194-cpufreq ccplex: probed with BWMGR [ 6.584485] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.584913] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.585414] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.586789] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.594262] tegra194-vi5 15c10000.vi: initialized [ 6.595888] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.596116] generic_infoframe_type: 0x87 [ 6.597281] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.600005] tegradc 15200000.display: DT parsed successfully [ 6.606708] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.612405] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.619897] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.619906] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.619910] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.619920] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.628874] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.628987] mmc0: CQHCI version 5.10 [ 6.639573] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.641139] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.647540] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.654080] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.654440] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.658075] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.662332] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.665981] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.666229] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.673894] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.681829] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.695304] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.711848] tegradc 15200000.display: probed [ 6.716554] nvethernet 2490000.ethernet: Macsec not supported [ 6.717903] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.719595] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.744333] mmc0: Command Queue Engine enabled [ 6.749866] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.756124] mmc0: periodic cache flush enabled [ 6.756148] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.760503] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.766884] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.774196] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.781083] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.786605] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.802480] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.842500] Console: switching to colour frame buffer device 240x67 [ 6.843274] tegra-se-nvhost 15810000.se: initialized [ 6.848127] tegradc 15200000.display: fb registered [ 6.858139] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.858566] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.864971] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.870469] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.876118] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.882726] tegra-se-nvhost 15820000.se: initialized [ 6.887377] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.887385] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.887388] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.887392] usb 1-2: Manufacturer: Generic [ 6.889504] hub 1-2:1.0: USB hub found [ 6.895272] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.902818] hub 1-2:1.0: 4 ports detected [ 6.909102] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.938752] tegra-se-nvhost 15830000.se: initialized [ 6.944797] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.949801] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.950578] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.956293] tegra-se-nvhost 15840000.se: initialized [ 6.965618] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.971443] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.976793] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.977448] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.984858] tegra_actmon d230000.actmon: in actmon_register()... [ 6.990607] Extcon AUX1(HDMI) enable [ 6.990777] tegradc 15210000.display: disp1 connected to head1->sor [ 6.997783] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.003769] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.007786] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.008416] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.013532] tegradc 15210000.display: DT parsed successfully [ 7.019551] hvc_sysfs: hypervisor is not present [ 7.026010] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.045387] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.046133] random: crng init done [ 7.059976] ALSA device list: [ 7.060142] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.060150] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.066948] tegradc 15210000.display: probed [ 7.068490] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.068495] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.068520] usb 2-3: Manufacturer: Generic [ 7.071905] No soundcards found. [ 7.085633] hub 2-3:1.0: USB hub found [ 7.115233] tegradc 15210000.display: fb registered [ 7.117137] hub 2-3:1.0: 4 ports detected [ 7.118592] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.118619] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.118628] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.144541] tegradc 15210000.display: blank - powerdown [ 7.149615] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.149618] Extcon DP: HPD disabled [ 7.149622] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.149632] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.149643] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.158783] Freeing unused kernel memory: 3968K [ 7.175554] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.191649] Run /init as init process ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.195926] tegradc 15200000.display: blank - powerdown [ 7.234379] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.234404] Extcon AUX1(HDMI) disable [ 7.257613] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.258498] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.263548] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.263554] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.269181] tegradc 15200000.display: unblank [ 7.270234] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.270421] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.276123] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.278022] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.282044] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.282048] Extcon AUX1(HDMI) enable [ 7.294797] tegradc 15200000.display: sync windows ret = 247 [ 7.322056] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.323728] Extcon HDMI: HPD enabled [ 7.325306] tegradc 15200000.display: hdmi: plugged [ 7.340826] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.342382] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.343863] usb 1-3: Product: Bluetooth Radio [ 7.345200] usb 1-3: Manufacturer: Realtek [ 7.346537] usb 1-3: SerialNumber: 00e04c000001 [ 7.378067] Root device found: mmcblk0p1 [ 7.381500] Found dev node: /dev/mmcblk0p1 [ 7.417147] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.422370] Rootfs mounted over mmcblk0p1 [ 7.457742] Switching from initrd to actual rootfs [ 7.600502] systemd[1]: System time before build time, advancing clock. [ 7.670468] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.675403] systemd[1]: Detected architecture arm64. [ 7.718625] systemd[1]: Set hostname to . [ 7.882474] systemd-sysv-generator[252]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.230596] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.232339] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.237771] systemd[1]: Created slice system-modprobe.slice. [ 8.242489] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.246613] systemd[1]: Created slice User and Session Slice. [ 8.250028] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.254343] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.257737] systemd[1]: Reached target User and Group Name Lookups. [ 8.260940] systemd[1]: Reached target Slices. [ 8.263996] systemd[1]: Reached target Swap. [ 8.267979] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.271556] systemd[1]: Listening on Syslog Socket. [ 8.274996] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.278302] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.282375] systemd[1]: Listening on Journal Audit Socket. [ 8.285910] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.289600] systemd[1]: Listening on Journal Socket. [ 8.293204] systemd[1]: Listening on udev Control Socket. [ 8.296696] systemd[1]: Listening on udev Kernel Socket. [ 8.305259] systemd[1]: Mounting Huge Pages File System... [ 8.313567] systemd[1]: Mounting POSIX Message Queue File System... [ 8.321582] systemd[1]: Mounting RPC Pipe File System... [ 8.330079] systemd[1]: Mounting Kernel Debug File System... [ 8.338803] systemd[1]: Mounting Kernel Trace File System... [ 8.350342] systemd[1]: Starting Journal Service... [ 8.362479] systemd[1]: Starting Set the console keyboard layout... [ 8.371972] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.376986] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.383231] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.392224] systemd[1]: Started Nameserver information manager. [ 8.397871] systemd[1]: Reached target Network (Pre). [ 8.404774] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.406588] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.412768] systemd[1]: Starting Load Kernel Modules... [ 8.420406] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.428809] systemd[1]: Starting udev Coldplug all Devices... [ 8.438769] systemd[1]: Mounted Huge Pages File System. [ 8.443740] systemd[1]: Mounted POSIX Message Queue File System. [ 8.447284] systemd[1]: Mounted RPC Pipe File System. [ 8.450936] systemd[1]: Mounted Kernel Debug File System. [ 8.454081] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.454754] systemd[1]: Mounted Kernel Trace File System. [ 8.456073] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.458366] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.458382] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.458386] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.458637] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.463701] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.463872] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.467173] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.467188] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.479630] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.485736] systemd[1]: nvfb-udev.service: Succeeded. [ 8.493359] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.503262] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.508421] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.510132] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.523763] systemd[1]: Starting Load/Save Random Seed... [ 8.531387] systemd[1]: Starting Create System Users... [ 8.569147] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.569147] [ 8.586255] systemd[1]: Finished Load/Save Random Seed. [ 8.602109] systemd[1]: Finished Create System Users. [ 8.608858] systemd[1]: Finished Load Kernel Modules. [ 8.613509] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.620572] systemd[1]: Mounting Kernel Configuration File System... [ 8.628111] systemd[1]: Started OP-TEE Client Supplicant. [ 8.636759] systemd[1]: Starting Apply Kernel Variables... [ 8.645314] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.655304] systemd[1]: Finished Set the console keyboard layout. [ 8.661963] systemd[1]: Mounted Kernel Configuration File System. [ 9.969605] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.976941] imx219 9-0010: board setup failed [ 9.977054] imx219: probe of 9-0010 failed with error -121 [ 9.991606] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.003530] imx219 10-0010: board setup failed [ 10.004893] imx219: probe of 10-0010 failed with error -121 [ 10.125647] hot-surface-alert cooling state: 0 -> 1 [ 10.296544] using random self ethernet address [ 10.297709] using random host ethernet address [ 11.884703] using random self ethernet address [ 11.884712] using random host ethernet address [ 12.106199] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.106206] Creating 1 MTD partitions on "spi6.0": [ 12.106216] 0x000000000000-0x000002000000 : "Whole_flash0" Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.846701] nvidia: loading out-of-tree module taints kernel. [ 29.519787] tegradc 15200000.display: sor_poll_register 0x16: timeout [ 29.519801] tegradc 15200000.display: dc timeout waiting for HEAD MODE = SLEEP [ 58.449778] watchdog: watchdog0: watchdog did not stop! [ 58.917198] Trying to unregister non-registered hwtime source [ 61.973715] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.975180] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized cvc initialized ÿä:20 UTC 2022ÿâavfs_clk_mach_post initialized ÿä aarcÿâavfs_clk_platform_post initialized ÿäh6ÿâcvc_late initialized regulator_post initialized ÿä4 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuratiÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäon might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.486] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.645] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.647] I> width = 720, height = 480, frequency = 26973026 [0003.651] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.745] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000021] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000688] Console: colour dummy device 80x25 [ 0.002181] printk: console [tty0] enabled [ 0.002243] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002280] pid_max: default: 32768 minimum: 301 [ 0.002443] LSM: Security Framework initializing [ 0.002501] Yama: becoming mindful. [ 0.002552] SELinux: Initializing. [ 0.002707] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002763] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005809] rcu: Hierarchical SRCU implementation. [ 0.006092] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006792] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006844] DTB Build time: Aug 10 2022 20:31:49 [ 0.009505] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009759] Remapping and enabling EFI services. [ 0.011776] smp: Bringing up secondary CPUs ... [ 0.041025] Detected PIPT I-cache on CPU1 [ 0.041144] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070680] Detected PIPT I-cache on CPU2 [ 0.070831] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100496] Detected PIPT I-cache on CPU3 [ 0.100641] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130387] Detected PIPT I-cache on CPU4 [ 0.130553] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160283] Detected PIPT I-cache on CPU5 [ 0.160435] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160776] smp: Brought up 1 node, 6 CPUs [ 0.161057] SMP: Total of 6 processors activated. [ 0.161141] CPU features: detected: Privileged Access Never [ 0.161164] CPU features: detected: LSE atomic instructions [ 0.161178] CPU features: detected: User Access Override [ 0.161192] CPU features: detected: 32-bit EL0 Support [ 0.161206] CPU features: detected: RAS Extension Support [ 0.161219] CPU features: detected: CRC32 instructions [ 0.161234] CPU features: detected: 32-bit EL1 Support [ 0.229130] CPU: All CPU(s) started at EL2 [ 0.235472] devtmpfs: initialized [ 0.284626] Registered cp15_barrier emulation handler [ 0.284736] Registered setend emulation handler [ 0.284756] KASLR enabled [ 0.285063] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285087] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286382] pinctrl core: initialized pinctrl subsystem [ 0.287324] SMBIOS 3.0.0 present. [ 0.287355] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.287946] NET: Registered protocol family 16 [ 0.289978] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.290496] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291199] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291256] audit: initializing netlink subsys (disabled) [ 0.291488] audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1 [ 0.291925] thermal_sys: Registered thermal governor 'step_wise' [ 0.291932] thermal_sys: Registered thermal governor 'power_allocator' [ 0.291947] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294166] cpuidle: using governor menu [ 0.294446] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.294810] ASID allocator initialised with 32768 entries [ 0.295063] Serial: AMBA PL011 UART driver [ 0.298330] Tegra reboot handler registered. [ 0.372558] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.372703] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.372900] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.372946] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.373067] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.373110] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.373224] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.373266] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.373380] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.373421] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.375661] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.375712] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.375742] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.375788] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.375817] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375857] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.375895] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375927] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375953] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375978] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.376004] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.376028] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.376052] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.376076] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.376099] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.376123] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.376147] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.376245] mc-err: mcerr ops are set to t19x [ 0.388733] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.388757] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.388770] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.388782] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.395978] ACPI: Interpreter disabled. [ 0.397348] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.398690] iommu: Default domain type: Translated [ 0.398749] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.399107] SCSI subsystem initialized [ 0.399272] usbcore: registered new interface driver usbfs [ 0.399315] usbcore: registered new interface driver hub [ 0.399350] usbcore: registered new device driver usb [ 0.399862] mc: Linux media interface: v0.10 [ 0.399896] videodev: Linux video capture interface: v2.00 [ 0.400297] pps_core: LinuxPPS API ver. 1 registered [ 0.400309] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.400329] PTP clock support registered [ 0.400612] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.400954] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401038] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.401744] Registered efivars operations [ 0.407358] FPGA manager framework [ 0.407484] Advanced Linux Sound Architecture Driver Initialized. [ 0.408038] Bluetooth: Core ver 2.22 [ 0.408079] NET: Registered protocol family 31 [ 0.408091] Bluetooth: HCI device and connection manager initialized [ 0.408106] Bluetooth: HCI socket layer initialized [ 0.408121] Bluetooth: L2CAP socket layer initialized [ 0.408142] Bluetooth: SCO socket layer initialized [ 0.409691] camchar: rtcpu character device driver loaded [ 0.410413] clocksource: Switched to clocksource arch_sys_counter [ 0.705614] VFS: Disk quotas dquot_6.6.0 [ 0.705684] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.706050] pnp: PnP ACPI: disabled [ 0.716856] la/ptsa driver initialized. [ 0.716995] NET: Registered protocol family 2 [ 0.717168] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.721723] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.721789] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.722087] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.722554] TCP: Hash tables configured (established 65536 bind 65536) [ 0.722694] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722786] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722980] NET: Registered protocol family 1 [ 0.723871] RPC: Registered named UNIX socket transport module. [ 0.723939] RPC: Registered udp transport module. [ 0.723961] RPC: Registered tcp transport module. [ 0.723982] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.724025] PCI: CLS 0 bytes, default 64 [ 0.724377] Trying to unpack rootfs image as initramfs... [ 0.988535] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.991501] Freeing initrd memory: 8196K [ 0.996880] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.996923] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.996962] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.997401] kvm [1]: IPA Size Limit: 40 bits [ 0.997970] kvm [1]: vgic interrupt IRQ9 [ 0.998575] kvm [1]: VHE mode initialized successfully [ 1.000346] Initialise system trusted keyrings [ 1.000713] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.008126] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.009134] NFS: Registering the id_resolver key type [ 1.009170] Key type id_resolver registered [ 1.009186] Key type id_legacy registered [ 1.009275] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.009299] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.009355] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.018977] NET: Registered protocol family 38 [ 1.018999] Key type asymmetric registered [ 1.019015] Asymmetric key parser 'x509' registered [ 1.019094] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.019391] io scheduler mq-deadline registered [ 1.019409] io scheduler kyber registered [ 1.025565] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.028365] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.028477] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.028577] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.028648] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.028719] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.034020] scrncapt: init (heads:4 wins:6 planes:4) [ 1.034052] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.035049] EINJ: ACPI disabled. [ 1.038678] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.038703] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.038717] tegra-pmc: ### PMC reset level: L1 [ 1.038730] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.038786] tegra-pmc: PMC Prod config success [ 1.044360] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.049890] random: fast init done [ 1.049994] printk: console [ttyTCU0] enabled [ 2.601695] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.606132] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.610727] arm-smmu 10000000.iommu: stage 1 translation [ 2.616536] arm-smmu 10000000.iommu: stage 2 translation [ 2.621699] arm-smmu 10000000.iommu: nested translation [ 2.627281] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.634198] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.646260] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.647320] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.654140] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.661689] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.666920] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.671647] arm-smmu 12000000.iommu: stage 1 translation [ 2.677155] arm-smmu 12000000.iommu: stage 2 translation [ 2.682579] arm-smmu 12000000.iommu: nested translation [ 2.688269] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.695443] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.707220] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.708286] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.714870] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.722593] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.732071] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.735282] tegra_profiler: auth: init [ 2.739769] THERMAL EST: found 3 subdevs [ 2.742963] THERMAL EST num_resources: 0 [ 2.747091] [THERMAL EST subdev 0] [ 2.750111] [THERMAL EST subdev 1] [ 2.753799] [THERMAL EST subdev 2] [ 2.757044] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.763235] THERMAL EST: thz register success. [ 2.767737] THERMAL EST: end of probe, return err: 0 [ 2.772792] nvsciipc: loaded module [ 2.779922] tun: Universal TUN/TAP device driver, 1.6 [ 2.782664] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.788560] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.794392] e1000e: Intel(R) PRO/1000 Network Driver [ 2.799048] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.805414] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.810422] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.816595] PPP generic driver version 2.4.2 [ 2.820897] PPP BSD Compression module registered [ 2.825659] PPP Deflate Compression module registered [ 2.830909] PPP MPPE Compression module registered [ 2.835650] usbcore: registered new interface driver r8152 [ 2.841427] usbcore: registered new interface driver asix [ 2.846784] usbcore: registered new interface driver ax88179_178a [ 2.852875] usbcore: registered new interface driver cdc_ether [ 2.858827] usbcore: registered new interface driver net1080 [ 2.864424] usbcore: registered new interface driver cdc_subset [ 2.870469] usbcore: registered new interface driver zaurus [ 2.876194] usbcore: registered new interface driver cdc_ncm [ 2.881838] usbcore: registered new interface driver aqc111 [ 2.887484] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.893301] ohci-pci: OHCI PCI platform driver [ 2.897854] ohci-platform: OHCI generic platform driver [ 2.903732] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.909798] usbcore: registered new interface driver uas [ 2.914164] usbcore: registered new interface driver usb-storage [ 2.920034] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.926396] mousedev: PS/2 mouse device common for all mice [ 2.931055] usbcore: registered new interface driver xpad [ 2.939242] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.942023] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.949598] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.956090] i2c /dev entries driver [ 2.959941] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.965663] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.970603] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.976253] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.981605] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.987103] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.992565] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.006168] device-mapper: uevent: version 1.0.3 [ 3.006768] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.012773] cpuidle: Initializing cpuidle driver [ 3.016935] sdhci: Secure Digital Host Controller Interface driver [ 3.021646] sdhci: Copyright(c) Pierre Ossman [ 3.025512] Synopsys Designware Multimedia Card Interface Driver [ 3.031955] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.037920] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.038759] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.050924] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.074919] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.084696] vdd-1v0: supplied by regulator-dummy [ 3.090286] vdd-1v8-hs: supplied by regulator-dummy [ 3.095316] vdd-1v8-ls: supplied by regulator-dummy [ 3.100223] vdd-1v8-ao: supplied by regulator-dummy [ 3.104229] vddio-ddr-1v1: supplied by regulator-dummy [ 3.108779] vdd-rtc: supplied by regulator-dummy [ 3.110651] spmic-ldo1: supplied by regulator-dummy [ 3.111954] vdd-ao-3v3: supplied by regulator-dummy [ 3.118229] vddio-emmc-3v3: supplied by regulator-dummy [ 3.124749] spmic-ldo4: supplied by regulator-dummy [ 3.126125] vdd-usb-3v3: supplied by regulator-dummy [ 3.132377] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.138776] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.144360] spmic-ldo8: supplied by vdd-1v8-ls [ 3.145922] gpio-510 (gpio_default): hogged as output/high [ 3.147258] gpio-511 (gpio_default): hogged as output/high [ 3.150151] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.285738] max77686-rtc max77620-rtc: registered as rtc0 [ 3.286836] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.287205] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.121934] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.123338] hid: raw HID events driver (C) Jiri Kosina [ 4.124014] usbcore: registered new interface driver usbhid [ 4.124158] usbhid: USB HID core driver [ 4.126118] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.127338] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.043868] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.118755] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 75.698 ms) ÿá[ 4.211800] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.212463] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.213842] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.215091] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.217117] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.217792] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.218469] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.219793] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.220040] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.222046] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.228348] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.234960] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.240042] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.245903] denver_knobs_init:MTS_VERSION:55637613 [ 4.260680] t19x_cache tegra-cache: probed [ 4.265538] optee: probing for conduit method. [ 4.266712] optee: revision 3.16 (65cc2218) [ 4.268043] optee: dynamic shared memory is enabled [ 4.269382] optee: initialized driver [ 4.273173] nvpmodel: initialized successfully [ 4.274524] tegra_hv: get_hvd: not initialized yet [ 4.279254] user_ivc_mempool: hypervisor not present [ 4.285368] usbcore: registered new interface driver snd-usb-audio [ 4.291703] u32 classifier [ 4.293000] input device check on [ 4.296742] Actions configured [ 4.300162] Initializing XFRM netlink socket [ 4.305072] NET: Registered protocol family 10 [ 4.312045] Segment Routing with IPv6 [ 4.312372] NET: Registered protocol family 17 [ 4.316917] NET: Registered protocol family 15 [ 4.321120] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.335146] Bluetooth: RFCOMM socket layer initialized [ 4.339645] Bluetooth: RFCOMM ver 1.11 [ 4.343257] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.349338] Bluetooth: HIDP socket layer initialized [ 4.355208] 9pnet: Installing 9P2000 support [ 4.358769] Key type dns_resolver registered [ 4.364215] registered taskstats version 1 [ 4.366967] Loading compiled-in X.509 certificates [ 4.379314] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.382856] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.393153] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.394907] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.403440] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.411801] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.526517] tegra194-pcie 14160000.pcie: Link up [ 4.529348] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.529559] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.529725] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.530010] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.530204] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.530620] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.531044] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.544199] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.544684] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.545128] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.546765] pci 0004:01:00.0: supports D1 D2 [ 4.547008] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.555815] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.556163] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.556391] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.556865] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.557113] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.557377] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.561404] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.568705] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.576956] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.587091] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.591650] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.597725] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.604126] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.613313] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.615243] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.623381] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.632099] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.746981] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.747509] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.747708] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.747862] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.748112] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.748320] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.748721] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.749154] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.766157] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.766869] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.768407] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.769618] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.771330] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.772621] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.773483] pci 0005:00:00.0: Removing from iommu group 7 [ 5.773759] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.802763] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.824732] host1x 13e10000.host1x: initialized [ 5.826130] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.827106] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.827909] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.828551] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.829333] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.829959] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.830813] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.831437] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.840431] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.847259] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.856932] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.864115] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.873862] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.881138] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.891006] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.897896] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.908326] falcon 15340000.vic: Adding to iommu group 17 [ 5.922359] falcon 15340000.vic: initialized [ 5.923197] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.927748] falcon 15380000.nvjpg: initialized [ 5.928283] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.940713] falcon 154c0000.nvenc: initialized [ 5.941215] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.950621] falcon 15a80000.nvenc1: initialized [ 5.951125] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.963140] nvdec 15480000.nvdec: initialized [ 5.963692] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.972268] nvdec 15140000.nvdec1: initialized [ 5.972694] tsec 15500000.tsec: Adding to iommu group 18 [ 5.979448] tsec 15500000.tsec: initialized [ 5.979869] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.988270] tsec 15100000.tsecb: initialized [ 5.992060] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.016461] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.026583] gpio-374 (wifi-enable): hogged as output/high [ 6.026911] gpio-431 (camera-control-output-low): hogged as output/low [ 6.027174] gpio-432 (camera-control-output-low): hogged as output/low [ 6.028652] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.029993] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.032384] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.039328] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.044622] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.050480] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.055725] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.063884] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.071391] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.083077] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.088117] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.093948] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.103092] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.112030] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.119571] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.126962] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.133400] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.143154] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.149065] pva 16000000.pva0: Adding to iommu group 22 [ 6.174855] pva 16000000.pva0: initialized [ 6.179924] pva 16800000.pva1: Adding to iommu group 23 [ 6.190752] pva 16800000.pva1: initialized [ 6.195568] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.207697] nvdla 15880000.nvdla0: initialized [ 6.208950] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.224715] nvdla 158c0000.nvdla1: initialized [ 6.226994] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.227266] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.227553] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.227842] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.228152] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.228193] tegradccommon 15200000.display-hub: dma mapping done [ 6.228422] tegradc 15200000.display: Adding to iommu group 26 [ 6.228507] tegradc 15210000.display: Adding to iommu group 26 [ 6.228881] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.237450] tegradc 15210000.display: disp0 connected to head1->sor [ 6.238704] tegra_cec 3960000.tegra_cec: probed [ 6.244655] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.251705] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.255541] tegradc 15210000.display: DT parsed successfully [ 6.262725] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.268083] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.275597] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.281032] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.288547] kfuse 3830000.kfuse: initialized [ 6.295045] generic_infoframe_type: 0x87 [ 6.301846] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.305441] tegradc 15200000.display: DT parsed successfully [ 6.308982] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.309620] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.315838] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.322244] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.332166] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.335412] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.341722] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.341745] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.351586] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.359937] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.366279] random: crng init done [ 6.367030] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.373206] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.381493] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.391346] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.408417] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.415839] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.420405] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.432105] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.440978] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.468759] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.477325] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.484119] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.491518] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.498552] usb usb1: Product: xHCI Host Controller [ 6.503494] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.509598] usb usb1: SerialNumber: 3610000.xhci [ 6.515474] hub 1-0:1.0: USB hub found [ 6.518228] hub 1-0:1.0: 4 ports detected [ 6.523262] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.527714] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.535267] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.543122] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.551112] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.558143] usb usb2: Product: xHCI Host Controller [ 6.563339] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.569531] usb usb2: SerialNumber: 3610000.xhci [ 6.575342] hub 2-0:1.0: USB hub found [ 6.577742] hub 2-0:1.0: 4 ports detected [ 6.620464] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.626146] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.627585] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.627802] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.641019] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.642115] tegra194-cpufreq ccplex: probed with BWMGR [ 6.643409] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.643876] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.644322] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.645430] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.652428] tegra194-vi5 15c10000.vi: initialized [ 6.653524] tegradc 15210000.display: disp0 connected to head1->sor [ 6.654753] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.658012] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.664438] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.671520] tegradc 15210000.display: DT parsed successfully [ 6.679681] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.684940] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.685005] mmc0: CQHCI version 5.10 [ 6.685793] tegradc 15210000.display: disp0 connected to head1->sor [ 6.685859] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.685903] tegradc 15210000.display: DT parsed successfully [ 6.685908] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.686049] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.686059] generic_infoframe_type: 0x87 [ 6.686082] tegradc 15200000.display: DT parsed successfully [ 6.686110] tegradc 15200000.display: Display dc.000000001e558480 registered with id=0 [ 6.691699] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.691723] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.691727] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.691730] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.703125] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.708932] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.716523] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.716664] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.722449] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.769448] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.782518] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.785563] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.790058] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.791539] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.800554] tegradc 15200000.display: probed [ 6.804377] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.805667] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.806467] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.877734] mmc0: Command Queue Engine enabled [ 6.887767] mmc0: periodic cache flush enabled [ 6.887787] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.898971] nvethernet 2490000.ethernet: Macsec not supported [ 6.899411] Console: switching to colour frame buffer device 240x67 [ 6.899659] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.900474] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.902078] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.902200] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.902314] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.904576] tegradc 15200000.display: fb registered [ 6.904636] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.911000] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.911413] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.913031] tegra-se-nvhost 15810000.se: initialized [ 6.920231] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.920329] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.920829] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.921518] tegra-se-nvhost 15820000.se: initialized [ 6.925454] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.929103] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.934365] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.936855] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.978217] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.985128] tegra-se-nvhost 15830000.se: initialized [ 6.990416] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.990422] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.990426] usb 1-2: Manufacturer: Generic [ 6.992657] hub 1-2:1.0: USB hub found [ 6.996242] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.998800] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.999957] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.999965] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.000557] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.000560] Extcon AUX1(HDMI) enable [ 7.000733] tegradc 15210000.display: disp1 connected to head1->sor [ 7.000898] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.000949] tegradc 15210000.display: DT parsed successfully [ 7.000982] tegradc 15210000.display: Display dc.000000002a6ebf1a registered with id=1 [ 7.001079] tegradc 15210000.display: vblank syncpt # 16 for dc 1 [ 7.001084] tegradc 15210000.display: vpulse3 syncpt # 17 for dc 1 [ 7.002878] hub 1-2:1.0: 4 ports detected [ 7.007636] tegradc 15210000.display: probed [ 7.007826] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.008490] tegra-se-nvhost 15840000.se: initialized [ 7.011802] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.013270] tegra_actmon d230000.actmon: in actmon_register()... [ 7.013430] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.013817] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.014293] hvc_sysfs: hypervisor is not present [ 7.040758] ALSA device list: [ 7.095335] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.096450] No soundcards found. [ 7.140015] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.140024] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.214952] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.214957] usb 2-3: Manufacturer: Generic ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.223691] tegradc 15210000.display: fb registered [ 7.223807] tegradc 15200000.display: blank - powerdown [ 7.225579] hub 2-3:1.0: USB hub found [ 7.227100] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.227105] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.227112] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.227738] hub 2-3:1.0: 4 ports detected [ 7.258500] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.265903] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.265908] Extcon AUX1(HDMI) disable [ 7.289399] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.290245] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.298489] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.298494] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.303450] tegradc 15200000.display: unblank [ 7.304498] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.304706] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.310476] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.312343] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.316300] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.316303] Extcon AUX1(HDMI) enable [ 7.329110] tegradc 15200000.display: sync windows ret = 247 [ 7.368763] tegradc 15210000.display: blank - powerdown [ 7.374215] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.374218] Extcon DP: HPD disabled [ 7.374222] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.374235] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.374241] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.382452] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.407698] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.412960] Extcon HDMI: HPD enabled [ 7.412972] tegradc 15200000.display: hdmi: plugged [ 7.421189] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.436936] usb 1-3: Product: Bluetooth Radio [ 7.436940] usb 1-3: Manufacturer: Realtek [ 7.436944] usb 1-3: SerialNumber: 00e04c000001 [ 7.451622] Freeing unused kernel memory: 3968K [ 7.455017] Run /init as init process [ 7.515043] Root device found: mmcblk0p1 [ 7.518453] Found dev node: /dev/mmcblk0p1 [ 7.554816] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.560133] Rootfs mounted over mmcblk0p1 [ 7.596704] Switching from initrd to actual rootfs [ 7.762099] systemd[1]: System time before build time, advancing clock. [ 7.831896] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.836798] systemd[1]: Detected architecture arm64. [ 7.889786] systemd[1]: Set hostname to . [ 8.059373] systemd-sysv-generator[249]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.405680] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.407371] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.412688] systemd[1]: Created slice system-modprobe.slice. [ 8.417120] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.421426] systemd[1]: Created slice User and Session Slice. [ 8.424758] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.428810] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.432017] systemd[1]: Reached target User and Group Name Lookups. [ 8.435221] systemd[1]: Reached target Slices. [ 8.438191] systemd[1]: Reached target Swap. [ 8.442010] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.445481] systemd[1]: Listening on Syslog Socket. [ 8.448892] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.452150] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.456229] systemd[1]: Listening on Journal Audit Socket. [ 8.461230] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.466335] systemd[1]: Listening on Journal Socket. [ 8.469967] systemd[1]: Listening on udev Control Socket. [ 8.473388] systemd[1]: Listening on udev Kernel Socket. [ 8.481667] systemd[1]: Mounting Huge Pages File System... [ 8.489927] systemd[1]: Mounting POSIX Message Queue File System... [ 8.497735] systemd[1]: Mounting RPC Pipe File System... [ 8.506137] systemd[1]: Mounting Kernel Debug File System... [ 8.514625] systemd[1]: Mounting Kernel Trace File System... [ 8.524446] systemd[1]: Starting Journal Service... [ 8.533276] systemd[1]: Starting Set the console keyboard layout... [ 8.541536] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.545143] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.551658] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.559882] systemd[1]: Started Nameserver information manager. [ 8.564631] systemd[1]: Reached target Network (Pre). [ 8.571774] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.573589] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.580575] systemd[1]: Starting Load Kernel Modules... [ 8.588299] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.597322] systemd[1]: Starting udev Coldplug all Devices... [ 8.607325] systemd[1]: Mounted Huge Pages File System. [ 8.611080] systemd[1]: Mounted POSIX Message Queue File System. [ 8.614694] systemd[1]: Mounted RPC Pipe File System. [ 8.618750] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.618931] systemd[1]: Mounted Kernel Debug File System. [ 8.623215] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.623648] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.626160] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.626177] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.626182] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.626459] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.627779] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.633415] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.635250] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.636701] systemd[1]: Mounted Kernel Trace File System. [ 8.653013] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.662643] systemd[1]: nvfb-udev.service: Succeeded. [ 8.668113] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.677571] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.689650] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.691718] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.698843] systemd[1]: Starting Load/Save Random Seed... [ 8.706661] systemd[1]: Starting Create System Users... [ 8.734363] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.734363] [ 8.759558] systemd[1]: Finished Load/Save Random Seed. [ 8.766074] systemd[1]: Finished Load Kernel Modules. [ 8.770881] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.777371] systemd[1]: Mounting Kernel Configuration File System... [ 8.785769] systemd[1]: Started OP-TEE Client Supplicant. [ 8.793814] systemd[1]: Starting Apply Kernel Variables... [ 8.803348] systemd[1]: Finished Set the console keyboard layout. [ 8.807404] systemd[1]: Mounted Kernel Configuration File System. [ 8.819882] systemd[1]: Finished Create System Users. [ 10.179400] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.186282] imx219 9-0010: board setup failed [ 10.188086] imx219: probe of 9-0010 failed with error -121 [ 10.204198] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.211025] imx219 10-0010: board setup failed [ 10.212461] imx219: probe of 10-0010 failed with error -121 [ 10.343728] hot-surface-alert cooling state: 0 -> 1 [ 10.780376] using random self ethernet address [ 10.813195] using random host ethernet address [ 11.855956] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.857596] Creating 1 MTD partitions on "spi6.0": [ 11.859861] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.327201] using random self ethernet address [ 12.327208] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.838583] nvidia: loading out-of-tree module taints kernel. [ 59.272380] watchdog: watchdog0: watchdog did not stop! [ 59.759912] Trying to unregister non-registered hwtime source [ 62.821429] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.823529] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, grÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized ÿä1ÿânoc_late initialized pm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 aÿâavfs_clk_platform_post initialized ÿäarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.612] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.651] I> edid read success [0003.651] I> width = 640, height = 480, frequency = 25174825 [0003.652] I> width = 1920, height = 1080, frequency = 148500000 [0003.652] I> width = 1280, height = 768, frequency = 79500000 [0003.652] I> width = 1360, height = 768, frequency = 85500000 [0003.653] I> width = 720, height = 480, frequency = 26973026 [0003.657] I> width = 720, height = 576, frequency = 26973026 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 720, height = 480, frequency = 26973026 [0003.691] I> width = 720, height = 576, frequency = 26973026 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 4096, height = 2160, frequency = 296703296 [0003.725] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.736] I> hdmi_enable, starting HDMI initialisation [0003.741] I> hdmi_enable, HDMI initialisation complete [0003.751] initializing target [0003.751] calling apps_init() [0003.752] starting app kernel_boot_app [0003.753] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000725] Console: colour dummy device 80x25 [ 0.002303] printk: console [tty0] enabled [ 0.002394] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002454] pid_max: default: 32768 minimum: 301 [ 0.002692] LSM: Security Framework initializing [ 0.002762] Yama: becoming mindful. [ 0.002828] SELinux: Initializing. [ 0.003028] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003067] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005930] rcu: Hierarchical SRCU implementation. [ 0.006184] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007080] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007131] DTB Build time: Aug 10 2022 20:31:49 [ 0.009960] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010218] Remapping and enabling EFI services. [ 0.012438] smp: Bringing up secondary CPUs ... [ 0.041896] Detected PIPT I-cache on CPU1 [ 0.041990] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071569] Detected PIPT I-cache on CPU2 [ 0.071644] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101244] Detected PIPT I-cache on CPU3 [ 0.101312] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131012] Detected PIPT I-cache on CPU4 [ 0.131114] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160741] Detected PIPT I-cache on CPU5 [ 0.160916] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161277] smp: Brought up 1 node, 6 CPUs [ 0.161558] SMP: Total of 6 processors activated. [ 0.161603] CPU features: detected: Privileged Access Never [ 0.161631] CPU features: detected: LSE atomic instructions [ 0.161649] CPU features: detected: User Access Override [ 0.161667] CPU features: detected: 32-bit EL0 Support [ 0.161686] CPU features: detected: RAS Extension Support [ 0.161705] CPU features: detected: CRC32 instructions [ 0.161723] CPU features: detected: 32-bit EL1 Support [ 0.229866] CPU: All CPU(s) started at EL2 [ 0.235171] devtmpfs: initialized [ 0.285157] Registered cp15_barrier emulation handler [ 0.285267] Registered setend emulation handler [ 0.285292] KASLR enabled [ 0.285575] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285609] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286719] pinctrl core: initialized pinctrl subsystem [ 0.287720] SMBIOS 3.0.0 present. [ 0.287752] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288464] NET: Registered protocol family 16 [ 0.290323] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.290821] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291724] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291794] audit: initializing netlink subsys (disabled) [ 0.292144] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292560] thermal_sys: Registered thermal governor 'step_wise' [ 0.292567] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292604] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294783] cpuidle: using governor menu [ 0.295062] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295490] ASID allocator initialised with 32768 entries [ 0.295704] Serial: AMBA PL011 UART driver [ 0.298930] Tegra reboot handler registered. [ 0.369644] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.369814] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.370049] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.370113] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.370259] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.370319] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.370467] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.370551] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.370703] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.370763] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.373065] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.373114] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.373154] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.373191] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.373232] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.373269] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.373344] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.373390] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.373438] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.373475] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.373522] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.373558] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.373592] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.373626] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.373660] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.373694] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.373727] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.373853] mc-err: mcerr ops are set to t19x [ 0.386294] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.386325] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.386344] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.386362] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.393575] ACPI: Interpreter disabled. [ 0.394915] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.396325] iommu: Default domain type: Translated [ 0.396402] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.396844] SCSI subsystem initialized [ 0.397020] usbcore: registered new interface driver usbfs [ 0.397069] usbcore: registered new interface driver hub [ 0.397109] usbcore: registered new device driver usb [ 0.397537] mc: Linux media interface: v0.10 [ 0.397571] videodev: Linux video capture interface: v2.00 [ 0.397906] pps_core: LinuxPPS API ver. 1 registered [ 0.397923] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.397952] PTP clock support registered [ 0.398158] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.398553] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.398647] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.399270] Registered efivars operations [ 0.405546] FPGA manager framework [ 0.405665] Advanced Linux Sound Architecture Driver Initialized. [ 0.406322] Bluetooth: Core ver 2.22 [ 0.406367] NET: Registered protocol family 31 [ 0.406383] Bluetooth: HCI device and connection manager initialized [ 0.406404] Bluetooth: HCI socket layer initialized [ 0.406426] Bluetooth: L2CAP socket layer initialized [ 0.406453] Bluetooth: SCO socket layer initialized [ 0.408108] camchar: rtcpu character device driver loaded [ 0.408760] clocksource: Switched to clocksource arch_sys_counter [ 0.699275] VFS: Disk quotas dquot_6.6.0 [ 0.699355] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.699725] pnp: PnP ACPI: disabled [ 0.711055] la/ptsa driver initialized. [ 0.711205] NET: Registered protocol family 2 [ 0.711370] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.717244] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.717328] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.717639] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.718083] TCP: Hash tables configured (established 65536 bind 65536) [ 0.718218] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.718316] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.718535] NET: Registered protocol family 1 [ 0.719216] RPC: Registered named UNIX socket transport module. [ 0.719235] RPC: Registered udp transport module. [ 0.719250] RPC: Registered tcp transport module. [ 0.719263] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.719285] PCI: CLS 0 bytes, default 64 [ 0.719485] Trying to unpack rootfs image as initramfs... [ 0.902475] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.904593] Freeing initrd memory: 8196K [ 0.908629] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.908706] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.908829] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.909252] kvm [1]: IPA Size Limit: 40 bits [ 0.909882] kvm [1]: vgic interrupt IRQ9 [ 0.910379] kvm [1]: VHE mode initialized successfully [ 0.911622] Initialise system trusted keyrings [ 0.911896] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.915614] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.916258] NFS: Registering the id_resolver key type [ 0.916289] Key type id_resolver registered [ 0.916304] Key type id_legacy registered [ 0.916369] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.916396] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.916431] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.924204] NET: Registered protocol family 38 [ 0.924230] Key type asymmetric registered [ 0.924246] Asymmetric key parser 'x509' registered [ 0.924290] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.924535] io scheduler mq-deadline registered [ 0.924555] io scheduler kyber registered [ 0.929194] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.931943] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.932015] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.932078] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.932139] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.932201] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.936576] scrncapt: init (heads:4 wins:6 planes:4) [ 0.936618] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.937561] EINJ: ACPI disabled. [ 0.940140] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.940168] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.940186] tegra-pmc: ### PMC reset level: L1 [ 0.940201] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.940254] tegra-pmc: PMC Prod config success [ 0.945236] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.949714] random: fast init done [ 0.950411] printk: console [ttyTCU0] enabled [ 2.502059] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.506857] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.511119] arm-smmu 10000000.iommu: stage 1 translation [ 2.516649] arm-smmu 10000000.iommu: stage 2 translation [ 2.522395] arm-smmu 10000000.iommu: nested translation [ 2.527498] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.534914] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.544198] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.548075] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.554618] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.562062] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.567400] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.572110] arm-smmu 12000000.iommu: stage 1 translation [ 2.577870] arm-smmu 12000000.iommu: stage 2 translation [ 2.583296] arm-smmu 12000000.iommu: nested translation [ 2.588488] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.595914] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.605150] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.609056] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.615587] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.623022] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.632506] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.636063] tegra_profiler: auth: init [ 2.640229] THERMAL EST: found 3 subdevs [ 2.643686] THERMAL EST num_resources: 0 [ 2.647554] [THERMAL EST subdev 0] [ 2.650846] [THERMAL EST subdev 1] [ 2.654256] [THERMAL EST subdev 2] [ 2.657502] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.663911] THERMAL EST: thz register success. [ 2.667938] THERMAL EST: end of probe, return err: 0 [ 2.673485] nvsciipc: loaded module [ 2.679999] tun: Universal TUN/TAP device driver, 1.6 [ 2.682632] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.689275] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.694826] e1000e: Intel(R) PRO/1000 Network Driver [ 2.699754] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.705579] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.710869] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.716981] PPP generic driver version 2.4.2 [ 2.721245] PPP BSD Compression module registered [ 2.725849] PPP Deflate Compression module registered [ 2.731128] PPP MPPE Compression module registered [ 2.736386] usbcore: registered new interface driver r8152 [ 2.741648] usbcore: registered new interface driver asix [ 2.746960] usbcore: registered new interface driver ax88179_178a [ 2.753072] usbcore: registered new interface driver cdc_ether [ 2.759015] usbcore: registered new interface driver net1080 [ 2.764620] usbcore: registered new interface driver cdc_subset [ 2.770677] usbcore: registered new interface driver zaurus [ 2.776622] usbcore: registered new interface driver cdc_ncm [ 2.782030] usbcore: registered new interface driver aqc111 [ 2.787935] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.793772] ohci-pci: OHCI PCI platform driver [ 2.798073] ohci-platform: OHCI generic platform driver [ 2.803776] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.810072] usbcore: registered new interface driver uas [ 2.814358] usbcore: registered new interface driver usb-storage [ 2.820456] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.826414] mousedev: PS/2 mouse device common for all mice [ 2.831513] usbcore: registered new interface driver xpad [ 2.839418] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.842526] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.850294] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.856509] i2c /dev entries driver [ 2.859916] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.865939] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.871244] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.876435] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.882016] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.887287] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.892953] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.905179] device-mapper: uevent: version 1.0.3 [ 2.905583] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.913064] cpuidle: Initializing cpuidle driver [ 2.916708] sdhci: Secure Digital Host Controller Interface driver [ 2.922105] sdhci: Copyright(c) Pierre Ossman [ 2.926225] Synopsys Designware Multimedia Card Interface Driver [ 2.932121] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.938068] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.944084] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.951487] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.970692] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.979849] vdd-1v0: supplied by regulator-dummy [ 2.985225] vdd-1v8-hs: supplied by regulator-dummy [ 2.989908] vdd-1v8-ls: supplied by regulator-dummy [ 2.994769] vdd-1v8-ao: supplied by regulator-dummy [ 2.998566] vddio-ddr-1v1: supplied by regulator-dummy [ 3.002883] vdd-rtc: supplied by regulator-dummy [ 3.004519] spmic-ldo1: supplied by regulator-dummy [ 3.005651] vdd-ao-3v3: supplied by regulator-dummy [ 3.011690] vddio-emmc-3v3: supplied by regulator-dummy [ 3.017933] spmic-ldo4: supplied by regulator-dummy [ 3.019074] vdd-usb-3v3: supplied by regulator-dummy [ 3.025124] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.031208] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.036627] spmic-ldo8: supplied by vdd-1v8-ls [ 3.038042] gpio-510 (gpio_default): hogged as output/high [ 3.039346] gpio-511 (gpio_default): hogged as output/high [ 3.045233] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.183598] max77686-rtc max77620-rtc: registered as rtc0 [ 3.184840] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.185157] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.901020] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.902019] hid: raw HID events driver (C) Jiri Kosina [ 3.902653] usbcore: registered new interface driver usbhid [ 3.902809] usbhid: USB HID core driver [ 3.904565] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.905739] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.731359] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.807004] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.456 ms) ÿá[ 3.990908] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.991525] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.992583] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.993482] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.995092] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.995803] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.996392] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.997816] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.998167] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.999945] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.007189] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.013583] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.018524] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.025783] denver_knobs_init:MTS_VERSION:55637613 [ 4.037664] t19x_cache tegra-cache: probed [ 4.040566] optee: probing for conduit method. [ 4.041585] optee: revision 3.16 (65cc2218) [ 4.042693] optee: dynamic shared memory is enabled [ 4.046179] optee: initialized driver [ 4.053524] nvpmodel: initialized successfully [ 4.054018] tegra_hv: get_hvd: not initialized yet [ 4.058472] user_ivc_mempool: hypervisor not present [ 4.064145] usbcore: registered new interface driver snd-usb-audio [ 4.071076] u32 classifier [ 4.071977] input device check on [ 4.076044] Actions configured [ 4.079350] Initializing XFRM netlink socket [ 4.084166] NET: Registered protocol family 10 [ 4.090490] Segment Routing with IPv6 [ 4.091561] NET: Registered protocol family 17 [ 4.096142] NET: Registered protocol family 15 [ 4.100266] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.113819] Bluetooth: RFCOMM socket layer initialized [ 4.118827] Bluetooth: RFCOMM ver 1.11 [ 4.122457] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.128522] Bluetooth: HIDP socket layer initialized [ 4.134199] 9pnet: Installing 9P2000 support [ 4.137745] Key type dns_resolver registered [ 4.143164] registered taskstats version 1 [ 4.146432] Loading compiled-in X.509 certificates [ 4.157527] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.161927] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.171862] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.174123] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.182999] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.191022] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.308846] tegra194-pcie 14160000.pcie: Link up [ 4.311900] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.312114] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.312298] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.312587] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.312898] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.313341] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.313818] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.327573] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.327986] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.328434] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.330181] pci 0004:01:00.0: supports D1 D2 [ 4.330323] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.339862] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.340295] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.340529] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.341105] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.341368] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.341549] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.343618] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.351090] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.359303] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.369732] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.374386] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.380119] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.386683] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.396666] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.397671] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.406130] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.414216] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.529568] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.530262] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.530508] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.530731] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.531131] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.531323] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.531766] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.532308] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.554497] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.554833] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.557184] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.558583] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.560184] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.561862] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.562975] pci 0005:00:00.0: Removing from iommu group 7 [ 5.563443] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.599831] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.633102] host1x 13e10000.host1x: initialized [ 5.635314] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.636474] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.638166] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.639022] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.640372] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.641152] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.642470] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.643164] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.644472] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.645260] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.646303] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.646874] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.656982] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.663887] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.673631] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.680503] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.690750] falcon 15340000.vic: Adding to iommu group 17 [ 5.704492] falcon 15340000.vic: initialized [ 5.705467] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.711238] falcon 15380000.nvjpg: initialized [ 5.711875] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.723556] falcon 154c0000.nvenc: initialized [ 5.724281] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.733959] falcon 15a80000.nvenc1: initialized [ 5.734492] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.746282] nvdec 15480000.nvdec: initialized [ 5.746894] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.756272] nvdec 15140000.nvdec1: initialized [ 5.756885] tsec 15500000.tsec: Adding to iommu group 18 [ 5.762611] tsec 15500000.tsec: initialized [ 5.763155] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.771731] tsec 15100000.tsecb: initialized [ 5.776008] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.804980] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.817867] gpio-374 (wifi-enable): hogged as output/high [ 5.818171] gpio-431 (camera-control-output-low): hogged as output/low [ 5.818490] gpio-432 (camera-control-output-low): hogged as output/low [ 5.820335] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.822646] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.823319] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.824929] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.826961] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.833158] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.838636] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.846977] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.854043] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.865378] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.870824] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.876987] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.885479] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.894820] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.902376] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.909642] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.916046] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.925435] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.931666] pva 16000000.pva0: Adding to iommu group 22 [ 5.959233] pva 16000000.pva0: initialized [ 5.963497] pva 16800000.pva1: Adding to iommu group 23 [ 5.975468] pva 16800000.pva1: initialized [ 5.979824] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.993771] nvdla 15880000.nvdla0: initialized [ 5.995240] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.004281] nvdla 158c0000.nvdla1: initialized [ 6.008367] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.008689] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.009091] tegradccommon 15200000.display-hub: dma mapping done [ 6.009298] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.009433] tegradc 15200000.display: Adding to iommu group 26 [ 6.009957] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.011947] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.016209] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.016559] tegradc 15210000.display: Adding to iommu group 26 [ 6.017330] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.017495] generic_infoframe_type: 0x87 [ 6.017602] tegradc 15200000.display: DT parsed successfully [ 6.017706] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.021846] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.028014] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.033757] tegra_cec 3960000.tegra_cec: probed [ 6.037417] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.037455] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.044916] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.052149] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.059915] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.065251] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.066953] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.070676] kfuse 3830000.kfuse: initialized [ 6.081852] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.087365] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.093056] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.097892] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.106563] tegradc 15210000.display: disp0 connected to head1->sor [ 6.111779] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.122126] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.139401] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.146596] tegradc 15210000.display: DT parsed successfully [ 6.154770] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.159522] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.201936] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.211112] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.216358] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.236174] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.236610] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.239366] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.247987] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.256211] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.263035] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.270731] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.277688] usb usb1: Product: xHCI Host Controller [ 6.282879] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.289221] usb usb1: SerialNumber: 3610000.xhci [ 6.294809] hub 1-0:1.0: USB hub found [ 6.297485] hub 1-0:1.0: 4 ports detected [ 6.302110] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.306861] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.314729] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.322441] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.330367] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.337576] usb usb2: Product: xHCI Host Controller [ 6.342305] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.348492] usb usb2: SerialNumber: 3610000.xhci [ 6.354043] hub 2-0:1.0: USB hub found [ 6.357006] hub 2-0:1.0: 4 ports detected [ 6.400284] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.406173] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.407734] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.407888] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.421318] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.422418] tegra194-cpufreq ccplex: probed with BWMGR [ 6.423806] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.424266] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.424704] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.426112] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.433939] tegra194-vi5 15c10000.vi: initialized [ 6.435516] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.437013] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.437421] generic_infoframe_type: 0x87 [ 6.440821] mmc0: CQHCI version 5.10 [ 6.443857] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.447315] tegradc 15200000.display: DT parsed successfully [ 6.451198] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.459108] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.464884] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.469709] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.471893] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.479115] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.479123] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.486024] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.486032] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.500832] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.502775] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.508688] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.508695] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.510171] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.514817] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.515025] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.532289] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.543685] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.546019] tegradc 15200000.display: probed [ 6.550593] nvethernet 2490000.ethernet: Macsec not supported [ 6.552196] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.553651] mmc0: Command Queue Engine enabled [ 6.553655] mmc0: periodic cache flush enabled [ 6.553670] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.554158] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.554261] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.557853] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.560845] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.566782] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.663450] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.663605] Console: switching to colour frame buffer device 240x67 [ 6.663627] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.665110] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.670053] tegradc 15200000.display: fb registered [ 6.670127] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.678485] tegra-se-nvhost 15810000.se: initialized [ 6.684204] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.694606] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.700415] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.705486] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.730321] tegra-se-nvhost 15820000.se: initialized [ 6.736358] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.741285] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.747830] tegra-se-nvhost 15830000.se: initialized [ 6.748650] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.752878] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.760174] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.766658] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.773468] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.773479] usb 1-2: Manufacturer: Generic [ 6.778381] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.779526] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.779533] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.780154] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.780578] tegra-se-nvhost 15840000.se: initialized [ 6.782122] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.783674] tegra_actmon d230000.actmon: in actmon_register()... [ 6.783854] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.784224] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.784781] hvc_sysfs: hypervisor is not present [ 6.786740] hub 1-2:1.0: USB hub found [ 6.787835] hub 1-2:1.0: 4 ports detected [ 6.788783] Extcon AUX1(HDMI) enable [ 6.824083] ALSA device list: [ 6.825111] tegradc 15210000.display: disp1 connected to head1->sor [ 6.831381] No soundcards found. [ 6.866867] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.869917] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.894220] tegradc 15210000.display: DT parsed successfully [ 6.900018] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.908466] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.910222] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.914431] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.921191] tegradc 15210000.display: probed [ 6.922396] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.939913] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.939918] usb 2-3: Manufacturer: Generic [ 6.948817] tegradc 15210000.display: fb registered [ 6.950798] hub 2-3:1.0: USB hub found [ 6.957151] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.959795] Freeing unused kernel memory: 3968K [ 6.959970] hub 2-3:1.0: 4 ports detected [ 6.965092] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.965104] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.987366] tegradc 15200000.display: blank - powerdown [ 7.013016] Run /init as init process [ 7.028834] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.028838] Extcon AUX1(HDMI) disable [ 7.040836] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.040842] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.044815] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.052159] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.053015] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.064614] tegradc 15200000.display: unblank [ 7.065902] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.066104] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.072194] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.074052] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.078015] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.078019] Extcon AUX1(HDMI) enable [ 7.090804] tegradc 15200000.display: sync windows ret = 247 [ 7.120390] tegradc 15210000.display: blank - powerdown [ 7.121916] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.121920] Extcon DP: HPD disabled [ 7.121925] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.121937] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.121942] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.138395] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.145600] Extcon HDMI: HPD enabled [ 7.149292] tegradc 15200000.display: hdmi: plugged [ 7.188557] Root device found: mmcblk0p1 [ 7.191964] Found dev node: /dev/mmcblk0p1 [ 7.194052] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.195481] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.196905] usb 1-3: Product: Bluetooth Radio [ 7.198219] usb 1-3: Manufacturer: Realtek [ 7.199474] usb 1-3: SerialNumber: 00e04c000001 [ 7.228330] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.234088] Rootfs mounted over mmcblk0p1 [ 7.271770] Switching from initrd to actual rootfs [ 7.442293] systemd[1]: System time before build time, advancing clock. [ 7.517108] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.519768] random: crng init done [ 7.521949] systemd[1]: Detected architecture arm64. [ 7.583722] systemd[1]: Set hostname to . [ 7.741498] systemd-sysv-generator[251]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.093301] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.094919] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.100706] systemd[1]: Created slice system-modprobe.slice. [ 8.105377] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.109510] systemd[1]: Created slice User and Session Slice. [ 8.112772] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.116710] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.120104] systemd[1]: Reached target User and Group Name Lookups. [ 8.123253] systemd[1]: Reached target Slices. [ 8.126240] systemd[1]: Reached target Swap. [ 8.130141] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.133701] systemd[1]: Listening on Syslog Socket. [ 8.137113] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.140361] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.144593] systemd[1]: Listening on Journal Audit Socket. [ 8.148230] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.151972] systemd[1]: Listening on Journal Socket. [ 8.155610] systemd[1]: Listening on udev Control Socket. [ 8.159109] systemd[1]: Listening on udev Kernel Socket. [ 8.167447] systemd[1]: Mounting Huge Pages File System... [ 8.176608] systemd[1]: Mounting POSIX Message Queue File System... [ 8.186064] systemd[1]: Mounting RPC Pipe File System... [ 8.194403] systemd[1]: Mounting Kernel Debug File System... [ 8.202721] systemd[1]: Mounting Kernel Trace File System... [ 8.212406] systemd[1]: Starting Journal Service... [ 8.221279] systemd[1]: Starting Set the console keyboard layout... [ 8.229412] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.232873] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.238968] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.246856] systemd[1]: Started Nameserver information manager. [ 8.251485] systemd[1]: Reached target Network (Pre). [ 8.258434] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.260266] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.266899] systemd[1]: Starting Load Kernel Modules... [ 8.274623] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.283586] systemd[1]: Starting udev Coldplug all Devices... [ 8.293634] systemd[1]: Mounted Huge Pages File System. [ 8.297355] systemd[1]: Mounted POSIX Message Queue File System. [ 8.301064] systemd[1]: Mounted RPC Pipe File System. [ 8.303204] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.308437] systemd[1]: Mounted Kernel Debug File System. [ 8.312101] systemd[1]: Mounted Kernel Trace File System. [ 8.312956] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.315310] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.315316] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.315326] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.315330] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.315584] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.315743] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.315923] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.315933] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.338977] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.347372] systemd[1]: nvfb-udev.service: Succeeded. [ 8.351786] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.363680] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.376507] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.378332] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.386268] systemd[1]: Starting Load/Save Random Seed... [ 8.394383] systemd[1]: Starting Create System Users... [ 8.402988] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.402988] [ 8.452163] systemd[1]: Finished Load/Save Random Seed. [ 8.459133] systemd[1]: Finished Load Kernel Modules. [ 8.463895] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.470060] systemd[1]: Mounting Kernel Configuration File System... [ 8.477946] systemd[1]: Started OP-TEE Client Supplicant. [ 8.487051] systemd[1]: Starting Apply Kernel Variables... [ 8.497699] systemd[1]: Finished Set the console keyboard layout. [ 8.501773] systemd[1]: Mounted Kernel Configuration File System. [ 8.513379] systemd[1]: Finished Create System Users. [ 9.943440] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.949984] imx219 9-0010: board setup failed [ 9.951264] imx219: probe of 9-0010 failed with error -121 [ 9.970548] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.978109] imx219 10-0010: board setup failed [ 9.979995] imx219: probe of 10-0010 failed with error -121 [ 10.029484] hot-surface-alert cooling state: 0 -> 1 [ 10.713572] using random self ethernet address [ 10.715253] using random host ethernet address [ 11.509897] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.511638] Creating 1 MTD partitions on "spi6.0": [ 11.534657] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.105378] using random self ethernet address [ 12.107374] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.835305] nvidia: loading out-of-tree module taints kernel. [ 59.898471] watchdog: watchdog0: watchdog did not stop! [ 60.373732] Trying to unregister non-registered hwtime source [ 63.435372] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.436921] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [Eþÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNIÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäNG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.614] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.622] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.650] I> edid read success [0003.651] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.652] I> width = 1280, height = 768, frequency = 79500000 [0003.652] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.736] I> hdmi_enable, starting HDMI initialisation [0003.741] I> hdmi_enable, HDMI initialisation complete [0003.750] initializing target [0003.751] calling apps_init() [0003.752] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000662] Console: colour dummy device 80x25 [ 0.002099] printk: console [tty0] enabled [ 0.002160] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002196] pid_max: default: 32768 minimum: 301 [ 0.002412] LSM: Security Framework initializing [ 0.002472] Yama: becoming mindful. [ 0.002518] SELinux: Initializing. [ 0.002667] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002704] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005760] rcu: Hierarchical SRCU implementation. [ 0.006005] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006689] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006737] DTB Build time: Aug 10 2022 20:31:49 [ 0.009415] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009688] Remapping and enabling EFI services. [ 0.011595] smp: Bringing up secondary CPUs ... [ 0.040839] Detected PIPT I-cache on CPU1 [ 0.040951] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070401] Detected PIPT I-cache on CPU2 [ 0.070548] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100126] Detected PIPT I-cache on CPU3 [ 0.100267] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130046] Detected PIPT I-cache on CPU4 [ 0.130209] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.159934] Detected PIPT I-cache on CPU5 [ 0.160073] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160457] smp: Brought up 1 node, 6 CPUs [ 0.160689] SMP: Total of 6 processors activated. [ 0.160737] CPU features: detected: Privileged Access Never [ 0.160780] CPU features: detected: LSE atomic instructions [ 0.160793] CPU features: detected: User Access Override [ 0.160807] CPU features: detected: 32-bit EL0 Support [ 0.160820] CPU features: detected: RAS Extension Support [ 0.160832] CPU features: detected: CRC32 instructions [ 0.160845] CPU features: detected: 32-bit EL1 Support [ 0.231503] CPU: All CPU(s) started at EL2 [ 0.238443] devtmpfs: initialized [ 0.307398] Registered cp15_barrier emulation handler [ 0.307571] Registered setend emulation handler [ 0.307609] KASLR enabled [ 0.307875] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.307930] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.310076] pinctrl core: initialized pinctrl subsystem [ 0.311369] SMBIOS 3.0.0 present. [ 0.311420] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.312319] NET: Registered protocol family 16 [ 0.315229] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.315998] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.317045] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.317125] audit: initializing netlink subsys (disabled) [ 0.317473] audit: type=2000 audit(0.312:1): state=initialized audit_enabled=0 res=1 [ 0.317966] thermal_sys: Registered thermal governor 'step_wise' [ 0.317975] thermal_sys: Registered thermal governor 'power_allocator' [ 0.317999] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.321568] cpuidle: using governor menu [ 0.322094] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.322635] ASID allocator initialised with 32768 entries [ 0.322948] Serial: AMBA PL011 UART driver [ 0.326350] Tegra reboot handler registered. [ 0.390725] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.390834] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.391038] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.391079] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.391215] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.391287] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.391439] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.391492] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.391624] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.391659] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.393962] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.394009] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.394046] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.394083] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.394120] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.394164] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.394213] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.394242] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.394275] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.394317] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.394341] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.394380] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.394403] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.394441] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.394467] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.394490] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.394512] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.394592] mc-err: mcerr ops are set to t19x [ 0.405961] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.405984] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.405996] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.406007] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.412342] ACPI: Interpreter disabled. [ 0.413402] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.414599] iommu: Default domain type: Translated [ 0.414657] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.415021] SCSI subsystem initialized [ 0.415153] usbcore: registered new interface driver usbfs [ 0.415189] usbcore: registered new interface driver hub [ 0.415220] usbcore: registered new device driver usb [ 0.415708] mc: Linux media interface: v0.10 [ 0.415749] videodev: Linux video capture interface: v2.00 [ 0.416108] pps_core: LinuxPPS API ver. 1 registered [ 0.416121] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.416140] PTP clock support registered [ 0.416362] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.416627] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.416711] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.417268] Registered efivars operations [ 0.422165] FPGA manager framework [ 0.422271] Advanced Linux Sound Architecture Driver Initialized. [ 0.422822] Bluetooth: Core ver 2.22 [ 0.422858] NET: Registered protocol family 31 [ 0.422869] Bluetooth: HCI device and connection manager initialized [ 0.422883] Bluetooth: HCI socket layer initialized [ 0.422895] Bluetooth: L2CAP socket layer initialized [ 0.422934] Bluetooth: SCO socket layer initialized [ 0.424548] camchar: rtcpu character device driver loaded [ 0.425632] clocksource: Switched to clocksource arch_sys_counter [ 0.716375] VFS: Disk quotas dquot_6.6.0 [ 0.716451] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.716758] pnp: PnP ACPI: disabled [ 0.728148] la/ptsa driver initialized. [ 0.728260] NET: Registered protocol family 2 [ 0.728443] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.733047] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.733160] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.733407] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.733872] TCP: Hash tables configured (established 65536 bind 65536) [ 0.734016] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.734120] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.734309] NET: Registered protocol family 1 [ 0.735192] RPC: Registered named UNIX socket transport module. [ 0.735248] RPC: Registered udp transport module. [ 0.735266] RPC: Registered tcp transport module. [ 0.735307] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.735346] PCI: CLS 0 bytes, default 64 [ 0.735612] Trying to unpack rootfs image as initramfs... [ 1.005371] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.008622] Freeing initrd memory: 8196K [ 1.014017] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.014053] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.014088] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.014488] kvm [1]: IPA Size Limit: 40 bits [ 1.015060] kvm [1]: vgic interrupt IRQ9 [ 1.015708] kvm [1]: VHE mode initialized successfully [ 1.017353] Initialise system trusted keyrings [ 1.017774] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.024297] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.025294] NFS: Registering the id_resolver key type [ 1.025332] Key type id_resolver registered [ 1.025349] Key type id_legacy registered [ 1.025483] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.025514] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.025555] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.036081] NET: Registered protocol family 38 [ 1.036108] Key type asymmetric registered [ 1.036125] Asymmetric key parser 'x509' registered [ 1.036175] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.036433] io scheduler mq-deadline registered [ 1.036453] io scheduler kyber registered [ 1.043391] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.046795] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.046899] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.046968] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.047035] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.047101] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.052892] scrncapt: init (heads:4 wins:6 planes:4) [ 1.053046] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.054050] EINJ: ACPI disabled. [ 1.057441] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.057466] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.057508] tegra-pmc: ### PMC reset level: L1 [ 1.057522] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.057585] tegra-pmc: PMC Prod config success [ 1.063733] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.098387] random: fast init done [ 1.103185] printk: console [ttyTCU0] enabled [ 2.621119] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.625674] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.630266] arm-smmu 10000000.iommu: stage 1 translation [ 2.636085] arm-smmu 10000000.iommu: stage 2 translation [ 2.641215] arm-smmu 10000000.iommu: nested translation [ 2.646847] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.654014] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.665378] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.666856] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.673680] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.681149] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.686712] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.691191] arm-smmu 12000000.iommu: stage 1 translation [ 2.696688] arm-smmu 12000000.iommu: stage 2 translation [ 2.702113] arm-smmu 12000000.iommu: nested translation [ 2.707542] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.714735] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.726293] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.728073] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.734666] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.741921] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.752101] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.754927] tegra_profiler: auth: init [ 2.759477] THERMAL EST: found 3 subdevs [ 2.762759] THERMAL EST num_resources: 0 [ 2.766598] [THERMAL EST subdev 0] [ 2.769669] [THERMAL EST subdev 1] [ 2.773312] [THERMAL EST subdev 2] [ 2.776324] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.782806] THERMAL EST: thz register success. [ 2.787020] THERMAL EST: end of probe, return err: 0 [ 2.792614] nvsciipc: loaded module [ 2.799957] tun: Universal TUN/TAP device driver, 1.6 [ 2.802161] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.808095] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.813955] e1000e: Intel(R) PRO/1000 Network Driver [ 2.818578] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.824677] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.830209] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.836203] PPP generic driver version 2.4.2 [ 2.840476] PPP BSD Compression module registered [ 2.844927] PPP Deflate Compression module registered [ 2.850432] PPP MPPE Compression module registered [ 2.855466] usbcore: registered new interface driver r8152 [ 2.860956] usbcore: registered new interface driver asix [ 2.866033] usbcore: registered new interface driver ax88179_178a [ 2.872413] usbcore: registered new interface driver cdc_ether [ 2.878389] usbcore: registered new interface driver net1080 [ 2.883963] usbcore: registered new interface driver cdc_subset [ 2.889756] usbcore: registered new interface driver zaurus [ 2.895467] usbcore: registered new interface driver cdc_ncm [ 2.901118] usbcore: registered new interface driver aqc111 [ 2.906776] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.913107] ohci-pci: OHCI PCI platform driver [ 2.917133] ohci-platform: OHCI generic platform driver [ 2.922990] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.929728] usbcore: registered new interface driver uas [ 2.933692] usbcore: registered new interface driver usb-storage [ 2.939586] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.945764] mousedev: PS/2 mouse device common for all mice [ 2.950850] usbcore: registered new interface driver xpad [ 2.958699] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.961556] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.969415] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.975948] i2c /dev entries driver [ 2.979277] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.984856] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.990394] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.995756] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.000915] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.006734] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.012101] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.026400] device-mapper: uevent: version 1.0.3 [ 3.026933] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.032780] cpuidle: Initializing cpuidle driver [ 3.036721] sdhci: Secure Digital Host Controller Interface driver [ 3.040928] sdhci: Copyright(c) Pierre Ossman [ 3.045305] Synopsys Designware Multimedia Card Interface Driver [ 3.051241] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.057233] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.058106] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.070593] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.094269] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.104441] vdd-1v0: supplied by regulator-dummy [ 3.109971] vdd-1v8-hs: supplied by regulator-dummy [ 3.114939] vdd-1v8-ls: supplied by regulator-dummy [ 3.119780] vdd-1v8-ao: supplied by regulator-dummy [ 3.123895] vddio-ddr-1v1: supplied by regulator-dummy [ 3.128434] vdd-rtc: supplied by regulator-dummy [ 3.130299] spmic-ldo1: supplied by regulator-dummy [ 3.131583] vdd-ao-3v3: supplied by regulator-dummy [ 3.137890] vddio-emmc-3v3: supplied by regulator-dummy [ 3.144236] spmic-ldo4: supplied by regulator-dummy [ 3.145547] vdd-usb-3v3: supplied by regulator-dummy [ 3.151880] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.158149] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.163810] spmic-ldo8: supplied by vdd-1v8-ls [ 3.165484] gpio-510 (gpio_default): hogged as output/high [ 3.166952] gpio-511 (gpio_default): hogged as output/high [ 3.169980] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.305775] max77686-rtc max77620-rtc: registered as rtc0 [ 3.306839] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.307184] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.165188] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.166486] hid: raw HID events driver (C) Jiri Kosina [ 4.167352] usbcore: registered new interface driver usbhid [ 4.167505] usbhid: USB HID core driver [ 4.170031] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.171391] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.262253] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.336255] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 74.812 ms) ÿá[ 4.255541] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.256366] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.258071] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.259142] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.261302] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.262391] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.263118] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.265144] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.265556] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.267653] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.271946] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.278252] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.283548] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.290972] denver_knobs_init:MTS_VERSION:55637613 [ 4.302906] t19x_cache tegra-cache: probed [ 4.307293] optee: probing for conduit method. [ 4.308185] optee: revision 3.16 (65cc2218) [ 4.309299] optee: dynamic shared memory is enabled [ 4.310718] optee: initialized driver [ 4.318187] nvpmodel: initialized successfully [ 4.318841] tegra_hv: get_hvd: not initialized yet [ 4.322503] user_ivc_mempool: hypervisor not present [ 4.328695] usbcore: registered new interface driver snd-usb-audio [ 4.334704] u32 classifier [ 4.335997] input device check on [ 4.339700] Actions configured [ 4.343692] Initializing XFRM netlink socket [ 4.348535] NET: Registered protocol family 10 [ 4.355926] Segment Routing with IPv6 [ 4.356225] NET: Registered protocol family 17 [ 4.360320] NET: Registered protocol family 15 [ 4.364634] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.377914] Bluetooth: RFCOMM socket layer initialized [ 4.382676] Bluetooth: RFCOMM ver 1.11 [ 4.386526] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.392618] Bluetooth: HIDP socket layer initialized [ 4.398593] 9pnet: Installing 9P2000 support [ 4.401828] Key type dns_resolver registered [ 4.408023] registered taskstats version 1 [ 4.410223] Loading compiled-in X.509 certificates [ 4.424118] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.426145] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.436489] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.438401] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.446677] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.455301] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.569744] tegra194-pcie 14160000.pcie: Link up [ 4.572488] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.572725] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.572884] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.573121] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.573312] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.573762] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.574186] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.586906] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.587337] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.587809] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.589349] pci 0004:01:00.0: supports D1 D2 [ 4.589540] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.599134] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.599452] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.599720] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.600107] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.600348] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.600516] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.604445] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.611672] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.620452] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.630822] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.635351] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.641407] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.648148] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.657214] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.658637] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.666758] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.675159] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.790689] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.791362] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.791659] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.791829] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.792062] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.792333] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.792708] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.793225] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.814078] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.814350] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.816720] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.818409] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.819961] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.822184] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.823304] pci 0005:00:00.0: Removing from iommu group 7 [ 5.823600] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.862941] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.890954] host1x 13e10000.host1x: initialized [ 5.892729] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.894079] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.895627] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.896645] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.898384] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.899211] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.900441] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.901033] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.902326] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.902999] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.904002] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.907994] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.918395] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.925077] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.934809] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.941621] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.951520] falcon 15340000.vic: Adding to iommu group 17 [ 5.967056] falcon 15340000.vic: initialized [ 5.968316] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.974354] falcon 15380000.nvjpg: initialized [ 5.974892] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.985552] falcon 154c0000.nvenc: initialized [ 5.986350] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.994733] falcon 15a80000.nvenc1: initialized [ 5.995419] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.009259] nvdec 15480000.nvdec: initialized [ 6.010297] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.020656] nvdec 15140000.nvdec1: initialized [ 6.021263] tsec 15500000.tsec: Adding to iommu group 18 [ 6.027049] tsec 15500000.tsec: initialized [ 6.027577] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.033001] tsec 15100000.tsecb: initialized [ 6.037803] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.066121] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.081181] gpio-374 (wifi-enable): hogged as output/high [ 6.081527] gpio-431 (camera-control-output-low): hogged as output/low [ 6.081998] gpio-432 (camera-control-output-low): hogged as output/low [ 6.084040] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.086397] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.087027] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.088522] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.089730] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.093996] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.099723] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.108274] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.115461] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.127466] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.132161] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.137956] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.146585] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.156210] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.163531] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.170799] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.176931] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.186828] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.193034] pva 16000000.pva0: Adding to iommu group 22 [ 6.221691] pva 16000000.pva0: initialized [ 6.226499] pva 16800000.pva1: Adding to iommu group 23 [ 6.238020] pva 16800000.pva1: initialized [ 6.242445] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.256365] nvdla 15880000.nvdla0: initialized [ 6.258318] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.268725] nvdla 158c0000.nvdla1: initialized [ 6.273906] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.274009] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.274240] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.274456] tegradccommon 15200000.display-hub: dma mapping done [ 6.274522] tegradc 15200000.display: Adding to iommu group 26 [ 6.274651] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.276765] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.277804] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.283033] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.283197] tegradc 15210000.display: Adding to iommu group 26 [ 6.283941] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.284107] generic_infoframe_type: 0x87 [ 6.284214] tegradc 15200000.display: DT parsed successfully [ 6.284336] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.287972] tegra_cec 3960000.tegra_cec: probed [ 6.289062] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.289267] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.292179] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.292747] kfuse 3830000.kfuse: initialized [ 6.293507] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.293515] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.294519] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.300670] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.300710] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.305425] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.311299] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.320403] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.322867] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.324752] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.332017] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.340874] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.345066] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.349211] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.355337] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.363614] tegradc 15210000.display: disp0 connected to head1->sor [ 6.379528] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.383599] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.391616] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.397701] tegradc 15210000.display: DT parsed successfully [ 6.403540] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.409749] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.508954] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.517282] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.524351] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.531418] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.538724] usb usb1: Product: xHCI Host Controller [ 6.543775] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.549824] usb usb1: SerialNumber: 3610000.xhci [ 6.555639] hub 1-0:1.0: USB hub found [ 6.558488] hub 1-0:1.0: 4 ports detected [ 6.563267] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.568061] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.575845] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.583621] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.591169] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.598381] usb usb2: Product: xHCI Host Controller [ 6.603625] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.609707] usb usb2: SerialNumber: 3610000.xhci [ 6.615143] hub 2-0:1.0: USB hub found [ 6.618110] hub 2-0:1.0: 4 ports detected [ 6.663936] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.670382] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.672010] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.672257] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.686371] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.687523] tegra194-cpufreq ccplex: probed with BWMGR [ 6.688857] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.689330] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.689806] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.691063] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.698053] tegra194-vi5 15c10000.vi: initialized [ 6.699400] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.699694] generic_infoframe_type: 0x87 [ 6.700561] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.700568] mmc0: CQHCI version 5.10 [ 6.702478] tegradc 15200000.display: DT parsed successfully [ 6.708823] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.712084] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.718126] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.726741] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.729686] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.733959] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.740455] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.740459] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.740803] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.748425] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.748431] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.753690] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.756563] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.763136] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.763146] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.771655] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.780721] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.786957] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.798411] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.805039] nvethernet 2490000.ethernet: Macsec not supported [ 6.815033] tegradc 15200000.display: probed [ 6.816564] mmc0: Command Queue Engine enabled [ 6.816570] mmc0: periodic cache flush enabled [ 6.816585] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.817153] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.817350] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.819217] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.821192] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.829758] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.837312] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.924516] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.924675] Console: switching [ 6.924679] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.924685] to colour frame buffer device 240x67 [ 6.926152] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.931336] tegradc 15200000.display: fb registered [ 6.936206] tegra-se-nvhost 15810000.se: initialized [ 6.941180] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.950924] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.952960] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.957313] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.961988] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.968223] tegra-se-nvhost 15820000.se: initialized [ 6.999114] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.003921] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.010347] tegra-se-nvhost 15830000.se: initialized [ 7.015394] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.017123] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.020883] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.028949] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.028966] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.029869] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.030990] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.030998] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.031581] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.031584] Extcon AUX1(HDMI) enable [ 7.031695] tegradc 15210000.display: disp1 connected to head1->sor [ 7.031863] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.031918] tegradc 15210000.display: DT parsed successfully [ 7.031952] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.032057] tegradc 15210000.display: vblank syncpt # 16 for dc 1 [ 7.032062] tegradc 15210000.display: vpulse3 syncpt # 17 for dc 1 [ 7.035663] tegra-se-nvhost 15840000.se: initialized [ 7.042253] usb 1-2: Manufacturer: Generic [ 7.046669] tegradc 15210000.display: probed [ 7.048466] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.058179] hub 1-2:1.0: USB hub found [ 7.065254] tegra_actmon d230000.actmon: in actmon_register()... [ 7.072695] hub 1-2:1.0: 4 ports detected [ 7.078844] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.142505] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.151241] tegra_actmon d230000.actmon: initialization Completed for the device mc_all ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.176162] tegradc 15210000.display: fb registered [ 7.176258] tegradc 15200000.display: blank - powerdown [ 7.176798] hvc_sysfs: hypervisor is not present [ 7.179611] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.179615] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.179623] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.184208] random: crng init done [ 7.191365] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.191374] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.191379] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.191396] usb 2-3: Manufacturer: Generic [ 7.201788] hub 2-3:1.0: USB hub found [ 7.203437] ALSA device list: [ 7.203443] No soundcards found. [ 7.203687] hub 2-3:1.0: 4 ports detected [ 7.213538] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.213543] Extcon AUX1(HDMI) disable [ 7.236770] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.237638] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.249409] tegradc 15200000.display: unblank [ 7.250517] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.250730] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.256698] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.258592] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.262598] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.262602] Extcon AUX1(HDMI) enable [ 7.275351] tegradc 15200000.display: sync windows ret = 247 [ 7.297706] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.309675] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.348222] tegradc 15210000.display: blank - powerdown [ 7.353362] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.353366] Extcon DP: HPD disabled [ 7.353370] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.353383] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.378202] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.378207] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.378222] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.384799] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.404444] Extcon HDMI: HPD enabled [ 7.404449] tegradc 15200000.display: hdmi: plugged [ 7.414182] Freeing unused kernel memory: 3968K [ 7.418019] Run /init as init process [ 7.478016] Root device found: mmcblk0p1 [ 7.481502] Found dev node: /dev/mmcblk0p1 [ 7.502862] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.504305] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.505669] usb 1-3: Product: Bluetooth Radio [ 7.506941] usb 1-3: Manufacturer: Realtek [ 7.508208] usb 1-3: SerialNumber: 00e04c000001 [ 7.518391] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.523757] Rootfs mounted over mmcblk0p1 [ 7.561303] Switching from initrd to actual rootfs [ 7.724606] systemd[1]: System time before build time, advancing clock. [ 7.804855] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.809951] systemd[1]: Detected architecture arm64. [ 7.850880] systemd[1]: Set hostname to . [ 8.017905] systemd-sysv-generator[249]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.372202] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.374013] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.379725] systemd[1]: Created slice system-modprobe.slice. [ 8.384334] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.388583] systemd[1]: Created slice User and Session Slice. [ 8.392008] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.396199] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.399710] systemd[1]: Reached target User and Group Name Lookups. [ 8.402933] systemd[1]: Reached target Slices. [ 8.406011] systemd[1]: Reached target Swap. [ 8.410030] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.413860] systemd[1]: Listening on Syslog Socket. [ 8.417953] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.423226] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.427588] systemd[1]: Listening on Journal Audit Socket. [ 8.431311] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.435140] systemd[1]: Listening on Journal Socket. [ 8.438902] systemd[1]: Listening on udev Control Socket. [ 8.442429] systemd[1]: Listening on udev Kernel Socket. [ 8.450824] systemd[1]: Mounting Huge Pages File System... [ 8.459223] systemd[1]: Mounting POSIX Message Queue File System... [ 8.467232] systemd[1]: Mounting RPC Pipe File System... [ 8.475624] systemd[1]: Mounting Kernel Debug File System... [ 8.484250] systemd[1]: Mounting Kernel Trace File System... [ 8.494019] systemd[1]: Starting Journal Service... [ 8.503363] systemd[1]: Starting Set the console keyboard layout... [ 8.511882] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.515535] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.522239] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.531404] systemd[1]: Started Nameserver information manager. [ 8.537095] systemd[1]: Reached target Network (Pre). [ 8.544805] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.546788] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.554250] systemd[1]: Starting Load Kernel Modules... [ 8.562190] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.570343] systemd[1]: Starting udev Coldplug all Devices... [ 8.581999] systemd[1]: Mounted Huge Pages File System. [ 8.586045] systemd[1]: Mounted POSIX Message Queue File System. [ 8.589964] systemd[1]: Mounted RPC Pipe File System. [ 8.592746] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.594902] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.597213] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.597996] systemd[1]: Mounted Kernel Debug File System. [ 8.598909] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.601799] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.601805] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.607122] systemd[1]: Mounted Kernel Trace File System. [ 8.608759] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.609035] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.609270] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.609286] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.625875] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.631146] systemd[1]: nvfb-udev.service: Succeeded. [ 8.635259] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.644965] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.657499] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.659401] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.666593] systemd[1]: Starting Load/Save Random Seed... [ 8.674504] systemd[1]: Starting Create System Users... [ 8.709573] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.709573] [ 8.723117] systemd[1]: Finished Load/Save Random Seed. [ 8.742025] systemd[1]: Finished Load Kernel Modules. [ 8.749097] systemd[1]: Finished Create System Users. [ 8.753894] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.760314] systemd[1]: Mounting Kernel Configuration File System... [ 8.768217] systemd[1]: Started OP-TEE Client Supplicant. [ 8.777281] systemd[1]: Starting Apply Kernel Variables... [ 8.787324] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.798584] systemd[1]: Finished Set the console keyboard layout. [ 8.803883] systemd[1]: Mounted Kernel Configuration File System. [ 10.199132] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.204480] imx219 9-0010: board setup failed [ 10.204585] imx219: probe of 9-0010 failed with error -121 [ 10.219200] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.226018] imx219 10-0010: board setup failed [ 10.227338] imx219: probe of 10-0010 failed with error -121 [ 10.290809] hot-surface-alert cooling state: 0 -> 1 [ 10.831718] using random self ethernet address [ 10.834223] using random host ethernet address [ 11.689083] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.689089] Creating 1 MTD partitions on "spi6.0": [ 11.689097] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.298767] using random self ethernet address [ 12.300722] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.829818] nvidia: loading out-of-tree module taints kernel. [ 58.419809] watchdog: watchdog0: watchdog did not stop! [ 58.878224] Trying to unregister non-registered hwtime source [ 61.937562] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.939740] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy : 1, ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized pm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.646] I> edid read success [0003.647] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.648] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.681] I> width = 720, height = 480, frequency = 26973026 [0003.686] I> width = 720, height = 576, frequency = 26973026 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.732] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.747] calling apps_init() [0003.747] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000766] Console: colour dummy device 80x25 [ 0.002310] printk: console [tty0] enabled [ 0.002376] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002415] pid_max: default: 32768 minimum: 301 [ 0.002626] LSM: Security Framework initializing [ 0.002691] Yama: becoming mindful. [ 0.002746] SELinux: Initializing. [ 0.002960] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006127] rcu: Hierarchical SRCU implementation. [ 0.006401] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007132] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007186] DTB Build time: Aug 10 2022 20:31:49 [ 0.010126] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010400] Remapping and enabling EFI services. [ 0.012553] smp: Bringing up secondary CPUs ... [ 0.041714] Detected PIPT I-cache on CPU1 [ 0.041791] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071395] Detected PIPT I-cache on CPU2 [ 0.071470] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101061] Detected PIPT I-cache on CPU3 [ 0.101128] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130813] Detected PIPT I-cache on CPU4 [ 0.130893] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160537] Detected PIPT I-cache on CPU5 [ 0.160607] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161301] smp: Brought up 1 node, 6 CPUs [ 0.161535] SMP: Total of 6 processors activated. [ 0.161595] CPU features: detected: Privileged Access Never [ 0.161635] CPU features: detected: LSE atomic instructions [ 0.161649] CPU features: detected: User Access Override [ 0.161663] CPU features: detected: 32-bit EL0 Support [ 0.161676] CPU features: detected: RAS Extension Support [ 0.161689] CPU features: detected: CRC32 instructions [ 0.161702] CPU features: detected: 32-bit EL1 Support [ 0.229698] CPU: All CPU(s) started at EL2 [ 0.234688] devtmpfs: initialized [ 0.291764] Registered cp15_barrier emulation handler [ 0.291855] Registered setend emulation handler [ 0.291888] KASLR enabled [ 0.292171] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.292224] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.294330] pinctrl core: initialized pinctrl subsystem [ 0.295334] SMBIOS 3.0.0 present. [ 0.295382] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.296270] NET: Registered protocol family 16 [ 0.298821] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.299025] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.299498] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.299591] audit: initializing netlink subsys (disabled) [ 0.299941] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.300462] thermal_sys: Registered thermal governor 'step_wise' [ 0.300470] thermal_sys: Registered thermal governor 'power_allocator' [ 0.300504] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.303898] cpuidle: using governor menu [ 0.304375] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.304905] ASID allocator initialised with 32768 entries [ 0.305281] Serial: AMBA PL011 UART driver [ 0.308898] Tegra reboot handler registered. [ 0.376377] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.376555] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.376822] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376934] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.377106] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.377181] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.377311] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.377366] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.377490] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.377549] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379963] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.380006] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.380060] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.380112] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.380147] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.380179] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.380223] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.380262] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.380297] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.380326] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.380357] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.380389] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.380418] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.380447] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.380475] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.380504] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.380532] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.380661] mc-err: mcerr ops are set to t19x [ 0.391686] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391719] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.391733] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391749] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.398099] ACPI: Interpreter disabled. [ 0.399346] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400570] iommu: Default domain type: Translated [ 0.400636] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400989] SCSI subsystem initialized [ 0.401138] usbcore: registered new interface driver usbfs [ 0.401191] usbcore: registered new interface driver hub [ 0.401222] usbcore: registered new device driver usb [ 0.401589] mc: Linux media interface: v0.10 [ 0.401614] videodev: Linux video capture interface: v2.00 [ 0.401878] pps_core: LinuxPPS API ver. 1 registered [ 0.401891] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401920] PTP clock support registered [ 0.402124] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.402409] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.402489] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.403045] Registered efivars operations [ 0.408723] FPGA manager framework [ 0.408826] Advanced Linux Sound Architecture Driver Initialized. [ 0.409414] Bluetooth: Core ver 2.22 [ 0.409453] NET: Registered protocol family 31 [ 0.409466] Bluetooth: HCI device and connection manager initialized [ 0.409481] Bluetooth: HCI socket layer initialized [ 0.409493] Bluetooth: L2CAP socket layer initialized [ 0.409549] Bluetooth: SCO socket layer initialized [ 0.411093] camchar: rtcpu character device driver loaded [ 0.411766] clocksource: Switched to clocksource arch_sys_counter [ 0.703114] VFS: Disk quotas dquot_6.6.0 [ 0.703203] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.703639] pnp: PnP ACPI: disabled [ 0.715563] la/ptsa driver initialized. [ 0.715691] NET: Registered protocol family 2 [ 0.715882] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.721189] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.721259] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.721578] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.722013] TCP: Hash tables configured (established 65536 bind 65536) [ 0.722155] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722243] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722487] NET: Registered protocol family 1 [ 0.723465] RPC: Registered named UNIX socket transport module. [ 0.723503] RPC: Registered udp transport module. [ 0.723550] RPC: Registered tcp transport module. [ 0.723571] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.723601] PCI: CLS 0 bytes, default 64 [ 0.723933] Trying to unpack rootfs image as initramfs... [ 0.990407] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.993318] Freeing initrd memory: 8196K [ 0.997411] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.997453] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.997528] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.997841] kvm [1]: IPA Size Limit: 40 bits [ 0.998344] kvm [1]: vgic interrupt IRQ9 [ 0.998949] kvm [1]: VHE mode initialized successfully [ 1.000416] Initialise system trusted keyrings [ 1.000762] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.006345] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.007127] NFS: Registering the id_resolver key type [ 1.007163] Key type id_resolver registered [ 1.007178] Key type id_legacy registered [ 1.007294] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.007320] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.007359] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.019136] NET: Registered protocol family 38 [ 1.019166] Key type asymmetric registered [ 1.019186] Asymmetric key parser 'x509' registered [ 1.019282] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.019593] io scheduler mq-deadline registered [ 1.019613] io scheduler kyber registered [ 1.025257] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.028480] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.028570] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.028646] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.028723] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.028794] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.034139] scrncapt: init (heads:4 wins:6 planes:4) [ 1.034446] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.035410] EINJ: ACPI disabled. [ 1.039014] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.039075] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.039096] tegra-pmc: ### PMC reset level: L1 [ 1.039115] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.039185] tegra-pmc: PMC Prod config success [ 1.044213] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.048911] random: fast init done [ 1.049055] printk: console [ttyTCU0] enabled [ 2.601703] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.605971] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.610580] arm-smmu 10000000.iommu: stage 1 translation [ 2.616112] arm-smmu 10000000.iommu: stage 2 translation [ 2.621548] arm-smmu 10000000.iommu: nested translation [ 2.626899] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.634069] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.643377] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.647173] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.653987] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.661268] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.666771] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.671772] arm-smmu 12000000.iommu: stage 1 translation [ 2.677001] arm-smmu 12000000.iommu: stage 2 translation [ 2.682696] arm-smmu 12000000.iommu: nested translation [ 2.688126] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.695305] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.704602] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.708162] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.714738] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.722215] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.731634] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.735142] tegra_profiler: auth: init [ 2.739379] THERMAL EST: found 3 subdevs [ 2.742810] THERMAL EST num_resources: 0 [ 2.746916] [THERMAL EST subdev 0] [ 2.749991] [THERMAL EST subdev 1] [ 2.753641] [THERMAL EST subdev 2] [ 2.756889] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.763257] THERMAL EST: thz register success. [ 2.767578] THERMAL EST: end of probe, return err: 0 [ 2.772860] nvsciipc: loaded module [ 2.779314] tun: Universal TUN/TAP device driver, 1.6 [ 2.782113] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.788670] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.794230] e1000e: Intel(R) PRO/1000 Network Driver [ 2.798885] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.805213] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.810514] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.816356] PPP generic driver version 2.4.2 [ 2.820958] PPP BSD Compression module registered [ 2.825507] PPP Deflate Compression module registered [ 2.830484] PPP MPPE Compression module registered [ 2.835760] usbcore: registered new interface driver r8152 [ 2.841276] usbcore: registered new interface driver asix [ 2.846587] usbcore: registered new interface driver ax88179_178a [ 2.852745] usbcore: registered new interface driver cdc_ether [ 2.858403] usbcore: registered new interface driver net1080 [ 2.864016] usbcore: registered new interface driver cdc_subset [ 2.870045] usbcore: registered new interface driver zaurus [ 2.875996] usbcore: registered new interface driver cdc_ncm [ 2.881689] usbcore: registered new interface driver aqc111 [ 2.887279] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.893402] ohci-pci: OHCI PCI platform driver [ 2.897433] ohci-platform: OHCI generic platform driver [ 2.903120] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.909586] usbcore: registered new interface driver uas [ 2.914016] usbcore: registered new interface driver usb-storage [ 2.919855] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.926102] mousedev: PS/2 mouse device common for all mice [ 2.930898] usbcore: registered new interface driver xpad [ 2.939091] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.941905] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.949421] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.956184] i2c /dev entries driver [ 2.959530] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.965303] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.970368] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.976013] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.981077] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.986845] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.992287] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.003957] device-mapper: uevent: version 1.0.3 [ 3.004380] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.012074] cpuidle: Initializing cpuidle driver [ 3.016393] sdhci: Secure Digital Host Controller Interface driver [ 3.021235] sdhci: Copyright(c) Pierre Ossman [ 3.025336] Synopsys Designware Multimedia Card Interface Driver [ 3.031765] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.037756] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.038339] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.050646] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.068423] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.077272] vdd-1v0: supplied by regulator-dummy [ 3.082627] vdd-1v8-hs: supplied by regulator-dummy [ 3.087310] vdd-1v8-ls: supplied by regulator-dummy [ 3.091936] vdd-1v8-ao: supplied by regulator-dummy [ 3.095678] vddio-ddr-1v1: supplied by regulator-dummy [ 3.099974] vdd-rtc: supplied by regulator-dummy [ 3.101516] spmic-ldo1: supplied by regulator-dummy [ 3.102690] vdd-ao-3v3: supplied by regulator-dummy [ 3.108820] vddio-emmc-3v3: supplied by regulator-dummy [ 3.114950] spmic-ldo4: supplied by regulator-dummy [ 3.116084] vdd-usb-3v3: supplied by regulator-dummy [ 3.122496] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.128500] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.133901] spmic-ldo8: supplied by vdd-1v8-ls [ 3.135221] gpio-510 (gpio_default): hogged as output/high [ 3.137519] gpio-511 (gpio_default): hogged as output/high [ 3.144654] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.283234] max77686-rtc max77620-rtc: registered as rtc0 [ 3.284475] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.284792] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.992254] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.993320] hid: raw HID events driver (C) Jiri Kosina [ 3.993972] usbcore: registered new interface driver usbhid [ 3.994138] usbhid: USB HID core driver [ 3.995866] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.997037] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.028068] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.103507] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.248 ms) ÿá[ 4.082027] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.082463] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.083353] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.084017] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.085714] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.086169] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.086707] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.087874] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.088055] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.089916] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.097924] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.104911] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.109999] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.116107] denver_knobs_init:MTS_VERSION:55637613 [ 4.130016] t19x_cache tegra-cache: probed [ 4.133603] optee: probing for conduit method. [ 4.134451] optee: revision 3.16 (65cc2218) [ 4.135395] optee: dynamic shared memory is enabled [ 4.137051] optee: initialized driver [ 4.143191] nvpmodel: initialized successfully [ 4.144543] tegra_hv: get_hvd: not initialized yet [ 4.149283] user_ivc_mempool: hypervisor not present [ 4.155210] usbcore: registered new interface driver snd-usb-audio [ 4.161861] u32 classifier [ 4.163288] input device check on [ 4.167140] Actions configured [ 4.170516] Initializing XFRM netlink socket [ 4.175159] NET: Registered protocol family 10 [ 4.181363] Segment Routing with IPv6 [ 4.182886] NET: Registered protocol family 17 [ 4.186935] NET: Registered protocol family 15 [ 4.191310] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.204930] Bluetooth: RFCOMM socket layer initialized [ 4.209630] Bluetooth: RFCOMM ver 1.11 [ 4.213595] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.219388] Bluetooth: HIDP socket layer initialized [ 4.225528] 9pnet: Installing 9P2000 support [ 4.229170] Key type dns_resolver registered [ 4.234518] registered taskstats version 1 [ 4.237355] Loading compiled-in X.509 certificates [ 4.249822] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.253416] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.263701] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.265163] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.274068] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.282379] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.399960] tegra194-pcie 14160000.pcie: Link up [ 4.402809] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.403030] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.403239] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.403439] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.403595] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.404055] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.404545] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.416686] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.417149] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.417610] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.419008] pci 0004:01:00.0: supports D1 D2 [ 4.419221] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.427491] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.428205] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.428417] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.428836] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.429114] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.429269] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.434615] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.441923] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.450695] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.460855] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.465721] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.471316] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.477888] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.486840] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.488658] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.496844] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.505675] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.611840] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.612428] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.612641] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.612823] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.613068] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.613250] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.613641] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.614032] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.630456] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.630725] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.632652] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.633869] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.635260] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.636899] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.637710] pci 0005:00:00.0: Removing from iommu group 7 [ 5.637936] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.667819] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.688987] host1x 13e10000.host1x: initialized [ 5.691093] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.692231] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.693446] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.694081] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.695168] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.696002] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.697123] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.697840] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.705230] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.711932] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.722260] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.729113] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.738900] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.745800] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.755912] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.762562] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.772635] falcon 15340000.vic: Adding to iommu group 17 [ 5.787132] falcon 15340000.vic: initialized [ 5.788133] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.793272] falcon 15380000.nvjpg: initialized [ 5.793875] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.804754] falcon 154c0000.nvenc: initialized [ 5.805348] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.816122] falcon 15a80000.nvenc1: initialized [ 5.816787] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.827696] nvdec 15480000.nvdec: initialized [ 5.828362] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.837035] nvdec 15140000.nvdec1: initialized [ 5.837567] tsec 15500000.tsec: Adding to iommu group 18 [ 5.843823] tsec 15500000.tsec: initialized [ 5.844351] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.852335] tsec 15100000.tsecb: initialized [ 5.856051] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.881133] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.892978] gpio-374 (wifi-enable): hogged as output/high [ 5.893276] gpio-431 (camera-control-output-low): hogged as output/low [ 5.893529] gpio-432 (camera-control-output-low): hogged as output/low [ 5.894918] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.896039] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.897335] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.904248] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.909199] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.915432] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.920665] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.928889] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.936435] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.948413] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.953171] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.959099] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.967779] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.977089] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.984873] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.991751] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.998262] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.007562] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.013938] pva 16000000.pva0: Adding to iommu group 22 [ 6.039768] pva 16000000.pva0: initialized [ 6.045110] pva 16800000.pva1: Adding to iommu group 23 [ 6.063084] pva 16800000.pva1: initialized [ 6.066675] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.080058] nvdla 15880000.nvdla0: initialized [ 6.081278] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.097170] nvdla 158c0000.nvdla1: initialized [ 6.101737] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.101859] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.102112] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.102351] tegradc 15200000.display: Adding to iommu group 26 [ 6.102415] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.102849] tegradccommon 15200000.display-hub: dma mapping done [ 6.104154] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.105208] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.105392] tegra_cec 3960000.tegra_cec: probed [ 6.108829] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.110988] tegradc 15210000.display: Adding to iommu group 26 [ 6.111261] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.111409] generic_infoframe_type: 0x87 [ 6.111512] tegradc 15200000.display: DT parsed successfully [ 6.111595] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.113801] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.115857] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.115873] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.115877] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.116730] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.116748] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.117850] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.120393] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.127989] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.131619] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.136324] kfuse 3830000.kfuse: initialized [ 6.145910] tegradc 15210000.display: disp0 connected to head1->sor [ 6.150399] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.158217] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.166125] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.166833] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.174444] tegradc 15210000.display: DT parsed successfully [ 6.180870] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.186238] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.279593] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.284280] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.293149] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.298660] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.318590] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.318960] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.321658] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.330265] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.338515] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.345317] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.352720] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.359866] usb usb1: Product: xHCI Host Controller [ 6.364828] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.371122] usb usb1: SerialNumber: 3610000.xhci [ 6.376987] hub 1-0:1.0: USB hub found [ 6.379678] hub 1-0:1.0: 4 ports detected [ 6.384377] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.389108] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.396962] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.404587] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.412329] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.419847] usb usb2: Product: xHCI Host Controller [ 6.424504] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.430713] usb usb2: SerialNumber: 3610000.xhci [ 6.436473] hub 2-0:1.0: USB hub found [ 6.439476] hub 2-0:1.0: 4 ports detected [ 6.481792] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.488268] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.490348] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.490633] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.503863] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.504977] tegra194-cpufreq ccplex: probed with BWMGR [ 6.506372] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.506883] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.507400] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.508576] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.514128] tegra194-vi5 15c10000.vi: initialized [ 6.515502] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.516946] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.517814] mmc0: CQHCI version 5.10 [ 6.519855] generic_infoframe_type: 0x87 [ 6.526159] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.529262] tegradc 15200000.display: DT parsed successfully [ 6.533170] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.533198] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.541344] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.546840] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.548791] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.554054] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.560292] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.568249] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.568257] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.583766] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.591284] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.597225] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.605359] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.605536] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.613256] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.621046] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.628040] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.632755] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.639091] nvethernet 2490000.ethernet: Macsec not supported [ 6.651738] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.658070] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.660024] tegradc 15200000.display: probed [ 6.666370] mmc0: Command Queue Engine enabled [ 6.673355] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.679580] mmc0: periodic cache flush enabled [ 6.685531] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.691964] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.700323] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.704944] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.710544] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.714888] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.720420] tegra-se-nvhost 15810000.se: initialized [ 6.737389] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.744198] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.776854] Console: switching to colour frame buffer device 240x67 [ 6.776975] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.782773] tegradc 15200000.display: fb registered [ 6.789815] tegra-se-nvhost 15820000.se: initialized [ 6.794261] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.800804] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.805672] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.811042] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.816895] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.823422] tegra-se-nvhost 15830000.se: initialized [ 6.834928] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.840587] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.846818] tegra-se-nvhost 15840000.se: initialized [ 6.851599] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.852993] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.859383] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.859393] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.867219] tegra_actmon d230000.actmon: in actmon_register()... [ 6.873208] usb 1-2: Manufacturer: Generic [ 6.877948] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.885354] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.887898] hub 1-2:1.0: USB hub found [ 6.893634] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.894440] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.894452] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.895045] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.895050] Extcon AUX1(HDMI) enable [ 6.895169] tegradc 15210000.display: disp1 connected to head1->sor [ 6.895340] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.895410] tegradc 15210000.display: DT parsed successfully [ 6.895444] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.895598] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.895608] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.902143] tegradc 15210000.display: probed [ 6.903454] hub 1-2:1.0: 4 ports detected [ 6.906603] hvc_sysfs: hypervisor is not present [ 6.968632] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.999529] ALSA device list: [ 7.003474] No soundcards found. [ 7.006841] tegradc 15210000.display: fb registered [ 7.010220] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.019442] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.019454] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.032483] tegradc 15210000.display: blank - powerdown [ 7.033412] Freeing unused kernel memory: 3968K [ 7.037431] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.037437] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.037441] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.037445] usb 2-3: Manufacturer: Generic [ 7.037553] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.042274] Run /init as init process [ 7.048181] hub 2-3:1.0: USB hub found [ 7.050003] hub 2-3:1.0: 4 ports detected [ 7.050482] Extcon DP: HPD disabled [ 7.050490] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.050543] random: crng init done [ 7.062054] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.074701] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.113216] tegradc 15200000.display: blank - powerdown [ 7.135810] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.152436] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.152440] Extcon AUX1(HDMI) disable [ 7.155775] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.175925] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.176758] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.189072] tegradc 15200000.display: unblank [ 7.190085] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.190266] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.196136] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.197982] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.200350] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.200355] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.201913] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.201917] Extcon AUX1(HDMI) enable [ 7.214733] tegradc 15200000.display: sync windows ret = 247 [ 7.245031] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.246486] Extcon HDMI: HPD enabled [ 7.247888] tegradc 15200000.display: hdmi: plugged [ 7.295628] Root device found: mmcblk0p1 [ 7.299276] Found dev node: /dev/mmcblk0p1 [ 7.309005] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.310467] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.312001] usb 1-3: Product: Bluetooth Radio [ 7.313306] usb 1-3: Manufacturer: Realtek [ 7.314581] usb 1-3: SerialNumber: 00e04c000001 [ 7.336520] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.341939] Rootfs mounted over mmcblk0p1 [ 7.378890] Switching from initrd to actual rootfs [ 7.538733] systemd[1]: System time before build time, advancing clock. [ 7.608916] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.613868] systemd[1]: Detected architecture arm64. [ 7.660125] systemd[1]: Set hostname to . [ 7.820479] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.176573] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.178339] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.184387] systemd[1]: Created slice system-modprobe.slice. [ 8.189015] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.193303] systemd[1]: Created slice User and Session Slice. [ 8.196826] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.201053] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.204498] systemd[1]: Reached target User and Group Name Lookups. [ 8.207979] systemd[1]: Reached target Slices. [ 8.211140] systemd[1]: Reached target Swap. [ 8.215396] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.219122] systemd[1]: Listening on Syslog Socket. [ 8.222800] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.226283] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.230668] systemd[1]: Listening on Journal Audit Socket. [ 8.234329] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.238159] systemd[1]: Listening on Journal Socket. [ 8.241916] systemd[1]: Listening on udev Control Socket. [ 8.245494] systemd[1]: Listening on udev Kernel Socket. [ 8.254066] systemd[1]: Mounting Huge Pages File System... [ 8.262614] systemd[1]: Mounting POSIX Message Queue File System... [ 8.270805] systemd[1]: Mounting RPC Pipe File System... [ 8.279574] systemd[1]: Mounting Kernel Debug File System... [ 8.288216] systemd[1]: Mounting Kernel Trace File System... [ 8.298618] systemd[1]: Starting Journal Service... [ 8.307874] systemd[1]: Starting Set the console keyboard layout... [ 8.317461] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.322270] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.329011] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.337756] systemd[1]: Started Nameserver information manager. [ 8.342657] systemd[1]: Reached target Network (Pre). [ 8.349326] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.351170] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.358465] systemd[1]: Starting Load Kernel Modules... [ 8.366915] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.375502] systemd[1]: Starting udev Coldplug all Devices... [ 8.386376] systemd[1]: Mounted Huge Pages File System. [ 8.390211] systemd[1]: Mounted POSIX Message Queue File System. [ 8.393906] systemd[1]: Mounted RPC Pipe File System. [ 8.397873] systemd[1]: Mounted Kernel Debug File System. [ 8.399577] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.400062] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.400069] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.400077] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.400081] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.400657] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.400829] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.401133] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.413793] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.415339] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.416811] systemd[1]: Mounted Kernel Trace File System. [ 8.424533] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.430637] systemd[1]: nvfb-udev.service: Succeeded. [ 8.435094] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.448921] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.453953] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.456211] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.469457] systemd[1]: Starting Load/Save Random Seed... [ 8.478340] systemd[1]: Starting Create System Users... [ 8.516165] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.516165] [ 8.528949] systemd[1]: Finished Load/Save Random Seed. [ 8.542092] systemd[1]: Finished Create System Users. [ 8.548835] systemd[1]: Finished Load Kernel Modules. [ 8.553180] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.559538] systemd[1]: Mounting Kernel Configuration File System... [ 8.567900] systemd[1]: Started OP-TEE Client Supplicant. [ 8.575966] systemd[1]: Starting Apply Kernel Variables... [ 8.584638] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.594821] systemd[1]: Finished Set the console keyboard layout. [ 8.599152] systemd[1]: Mounted Kernel Configuration File System. [ 10.015025] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.022324] imx219 9-0010: board setup failed [ 10.022504] imx219: probe of 9-0010 failed with error -121 [ 10.034819] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.067857] imx219 10-0010: board setup failed [ 10.069182] imx219: probe of 10-0010 failed with error -121 [ 10.146205] hot-surface-alert cooling state: 0 -> 1 [ 10.803320] using random self ethernet address [ 10.808773] using random host ethernet address [ 11.865736] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.865743] Creating 1 MTD partitions on "spi6.0": [ 11.865753] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.469724] using random self ethernet address [ 12.469731] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.828313] nvidia: loading out-of-tree module taints kernel. [ 59.449162] watchdog: watchdog0: watchdog did not stop! [ 59.913420] Trying to unregister non-registered hwtime source [ 62.974875] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.977158] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy : 1,ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 68500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aÿâclk_dt_late initialized noc_late initialized ÿäuÿâpm_post initialized dbells initialized ÿäg 1ÿâdmce initialized ÿä1ÿâcvc initialized ÿä 03:23:20 UTÿâavfs_clk_mach_post initialized ÿäC 202ÿâavfs_clk_platform_post initialized ÿä2 ÿâcvc_late initialized regulator_post initialized ÿäaarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> hdmi cable connected [0003.612] W> set volts not configured for 'vdd-1v0' [0003.619] W> set volts not configured for 'vdd-1v8-hs' [0003.619] I> retrieved tmds range from prod_list_hdmi_soc [0003.627] E> invalid display type [0003.629] E> cannot find any other nvdisp nodes [0003.646] I> edid read success [0003.658] I> edid read success [0003.659] I> width = 640, height = 480, frequency = 25174825 [0003.659] I> width = 1920, height = 1080, frequency = 148500000 [0003.659] I> width = 1280, height = 768, frequency = 79500000 [0003.660] I> width = 1360, height = 768, frequency = 85500000 [0003.660] I> width = 720, height = 480, frequency = 26973026 [0003.664] I> width = 720, height = 576, frequency = 26973026 [0003.670] I> width = 1280, height = 720, frequency = 74175824 [0003.675] I> width = 1280, height = 720, frequency = 74175824 [0003.681] I> width = 1920, height = 1080, frequency = 148351648 [0003.687] I> width = 1920, height = 1080, frequency = 148351648 [0003.692] I> width = 720, height = 480, frequency = 26973026 [0003.698] I> width = 720, height = 576, frequency = 26973026 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 3840, height = 2160, frequency = 296703296 [0003.721] I> width = 3840, height = 2160, frequency = 296703296 [0003.726] I> width = 4096, height = 2160, frequency = 296703296 [0003.732] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.744] I> hdmi_enable, starting HDMI initialisation [0003.748] I> hdmi_enable, HDMI initialisation complete [0003.758] initializing target [0003.759] calling apps_init() [0003.760] starting app kernel_boot_app [0003.761] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000698] Console: colour dummy device 80x25 [ 0.002079] printk: console [tty0] enabled [ 0.002143] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002178] pid_max: default: 32768 minimum: 301 [ 0.002362] LSM: Security Framework initializing [ 0.002420] Yama: becoming mindful. [ 0.002465] SELinux: Initializing. [ 0.002634] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002671] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005924] rcu: Hierarchical SRCU implementation. [ 0.006188] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006939] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007008] DTB Build time: Aug 10 2022 20:31:49 [ 0.009809] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010047] Remapping and enabling EFI services. [ 0.012618] smp: Bringing up secondary CPUs ... [ 0.041856] Detected PIPT I-cache on CPU1 [ 0.041932] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.076646] Detected PIPT I-cache on CPU2 [ 0.076794] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.106462] Detected PIPT I-cache on CPU3 [ 0.106596] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.136326] Detected PIPT I-cache on CPU4 [ 0.136536] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.166283] Detected PIPT I-cache on CPU5 [ 0.166384] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166734] smp: Brought up 1 node, 6 CPUs [ 0.166942] SMP: Total of 6 processors activated. [ 0.167010] CPU features: detected: Privileged Access Never [ 0.167049] CPU features: detected: LSE atomic instructions [ 0.167063] CPU features: detected: User Access Override [ 0.167077] CPU features: detected: 32-bit EL0 Support [ 0.167090] CPU features: detected: RAS Extension Support [ 0.167103] CPU features: detected: CRC32 instructions [ 0.167117] CPU features: detected: 32-bit EL1 Support [ 0.239879] CPU: All CPU(s) started at EL2 [ 0.246919] devtmpfs: initialized [ 0.297478] Registered cp15_barrier emulation handler [ 0.297599] Registered setend emulation handler [ 0.297618] KASLR enabled [ 0.297911] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.297934] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.299308] pinctrl core: initialized pinctrl subsystem [ 0.300387] SMBIOS 3.0.0 present. [ 0.300428] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.301019] NET: Registered protocol family 16 [ 0.302953] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.303473] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.304162] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.304225] audit: initializing netlink subsys (disabled) [ 0.304526] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.305026] thermal_sys: Registered thermal governor 'step_wise' [ 0.305033] thermal_sys: Registered thermal governor 'power_allocator' [ 0.305047] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.307188] cpuidle: using governor menu [ 0.307518] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.307984] ASID allocator initialised with 32768 entries [ 0.308236] Serial: AMBA PL011 UART driver [ 0.311570] Tegra reboot handler registered. [ 0.381225] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.381381] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.381590] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.381643] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.381786] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.381832] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.381971] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.382015] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.382143] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.382187] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.384318] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.384354] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.384385] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.384414] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.384460] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.384490] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.384526] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.384560] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.384586] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.384611] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.384635] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.384660] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.384701] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.384726] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.384752] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.384777] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.384802] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.384888] mc-err: mcerr ops are set to t19x [ 0.397924] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.397950] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.397963] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.397975] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.405800] ACPI: Interpreter disabled. [ 0.407529] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.409289] iommu: Default domain type: Translated [ 0.409394] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.410012] SCSI subsystem initialized [ 0.410280] usbcore: registered new interface driver usbfs [ 0.410379] usbcore: registered new interface driver hub [ 0.410466] usbcore: registered new device driver usb [ 0.411081] mc: Linux media interface: v0.10 [ 0.411142] videodev: Linux video capture interface: v2.00 [ 0.411559] pps_core: LinuxPPS API ver. 1 registered [ 0.411583] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.411639] PTP clock support registered [ 0.411970] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.412484] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.412602] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.413480] Registered efivars operations [ 0.422962] FPGA manager framework [ 0.423176] Advanced Linux Sound Architecture Driver Initialized. [ 0.424130] Bluetooth: Core ver 2.22 [ 0.424185] NET: Registered protocol family 31 [ 0.424203] Bluetooth: HCI device and connection manager initialized [ 0.424225] Bluetooth: HCI socket layer initialized [ 0.424245] Bluetooth: L2CAP socket layer initialized [ 0.424275] Bluetooth: SCO socket layer initialized [ 0.426302] camchar: rtcpu character device driver loaded [ 0.427177] clocksource: Switched to clocksource arch_sys_counter [ 0.851338] VFS: Disk quotas dquot_6.6.0 [ 0.851460] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.851964] pnp: PnP ACPI: disabled [ 0.868141] la/ptsa driver initialized. [ 0.868369] NET: Registered protocol family 2 [ 0.868576] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.876959] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.877075] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.877458] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.878079] TCP: Hash tables configured (established 65536 bind 65536) [ 0.878246] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.878389] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.878680] NET: Registered protocol family 1 [ 0.879700] RPC: Registered named UNIX socket transport module. [ 0.879736] RPC: Registered udp transport module. [ 0.879755] RPC: Registered tcp transport module. [ 0.879773] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.879813] PCI: CLS 0 bytes, default 64 [ 0.880146] Trying to unpack rootfs image as initramfs... [ 1.143394] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.146516] Freeing initrd memory: 8196K [ 1.150976] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.151027] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.151069] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.151520] kvm [1]: IPA Size Limit: 40 bits [ 1.152075] kvm [1]: vgic interrupt IRQ9 [ 1.152720] kvm [1]: VHE mode initialized successfully [ 1.154420] Initialise system trusted keyrings [ 1.154830] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.161112] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.161927] NFS: Registering the id_resolver key type [ 1.161964] Key type id_resolver registered [ 1.161982] Key type id_legacy registered [ 1.162066] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.162097] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.162168] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.171506] NET: Registered protocol family 38 [ 1.171530] Key type asymmetric registered [ 1.171546] Asymmetric key parser 'x509' registered [ 1.171595] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.171904] io scheduler mq-deadline registered [ 1.171922] io scheduler kyber registered [ 1.177950] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.181295] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.181402] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.181488] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.181560] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.181630] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.188006] scrncapt: init (heads:4 wins:6 planes:4) [ 1.188160] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.189260] EINJ: ACPI disabled. [ 1.192848] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.192877] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.192919] tegra-pmc: ### PMC reset level: L1 [ 1.192934] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.192987] tegra-pmc: PMC Prod config success [ 1.198001] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.203144] random: fast init done [ 1.203971] printk: console [ttyTCU0] enabled [ 2.755573] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.760197] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.764693] arm-smmu 10000000.iommu: stage 1 translation [ 2.769965] arm-smmu 10000000.iommu: stage 2 translation [ 2.775449] arm-smmu 10000000.iommu: nested translation [ 2.780781] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.788215] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.798070] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.801345] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.807643] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.815159] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.820942] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.825658] arm-smmu 12000000.iommu: stage 1 translation [ 2.831193] arm-smmu 12000000.iommu: stage 2 translation [ 2.836354] arm-smmu 12000000.iommu: nested translation [ 2.842023] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.848943] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.858965] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.862075] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.868628] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.876113] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.885706] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.889303] tegra_profiler: auth: init [ 2.893238] THERMAL EST: found 3 subdevs [ 2.896982] THERMAL EST num_resources: 0 [ 2.900565] [THERMAL EST subdev 0] [ 2.904145] [THERMAL EST subdev 1] [ 2.907301] [THERMAL EST subdev 2] [ 2.910531] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.917197] THERMAL EST: thz register success. [ 2.921263] THERMAL EST: end of probe, return err: 0 [ 2.926512] nvsciipc: loaded module [ 2.933374] tun: Universal TUN/TAP device driver, 1.6 [ 2.936369] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.942611] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.948151] e1000e: Intel(R) PRO/1000 Network Driver [ 2.953059] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.958885] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.964174] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.970586] PPP generic driver version 2.4.2 [ 2.974594] PPP BSD Compression module registered [ 2.979403] PPP Deflate Compression module registered [ 2.984395] PPP MPPE Compression module registered [ 2.989671] usbcore: registered new interface driver r8152 [ 2.995200] usbcore: registered new interface driver asix [ 3.000262] usbcore: registered new interface driver ax88179_178a [ 3.006369] usbcore: registered new interface driver cdc_ether [ 3.012579] usbcore: registered new interface driver net1080 [ 3.018180] usbcore: registered new interface driver cdc_subset [ 3.023960] usbcore: registered new interface driver zaurus [ 3.029930] usbcore: registered new interface driver cdc_ncm [ 3.035620] usbcore: registered new interface driver aqc111 [ 3.041074] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.047343] ohci-pci: OHCI PCI platform driver [ 3.051619] ohci-platform: OHCI generic platform driver [ 3.057496] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.063799] usbcore: registered new interface driver uas [ 3.067901] usbcore: registered new interface driver usb-storage [ 3.073978] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.079988] mousedev: PS/2 mouse device common for all mice [ 3.085058] usbcore: registered new interface driver xpad [ 3.092675] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.095808] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.103593] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.109856] i2c /dev entries driver [ 3.113442] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.119427] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.124866] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.129790] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.135077] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.140623] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.146053] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.159896] device-mapper: uevent: version 1.0.3 [ 3.160366] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.166657] cpuidle: Initializing cpuidle driver [ 3.170408] sdhci: Secure Digital Host Controller Interface driver [ 3.175183] sdhci: Copyright(c) Pierre Ossman [ 3.179519] Synopsys Designware Multimedia Card Interface Driver [ 3.185473] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.191694] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.192603] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.204879] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.228670] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.238236] vdd-1v0: supplied by regulator-dummy [ 3.243830] vdd-1v8-hs: supplied by regulator-dummy [ 3.248776] vdd-1v8-ls: supplied by regulator-dummy [ 3.253647] vdd-1v8-ao: supplied by regulator-dummy [ 3.257647] vddio-ddr-1v1: supplied by regulator-dummy [ 3.262138] vdd-rtc: supplied by regulator-dummy [ 3.263976] spmic-ldo1: supplied by regulator-dummy [ 3.265241] vdd-ao-3v3: supplied by regulator-dummy [ 3.271469] vddio-emmc-3v3: supplied by regulator-dummy [ 3.277899] spmic-ldo4: supplied by regulator-dummy [ 3.279205] vdd-usb-3v3: supplied by regulator-dummy [ 3.285459] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.291961] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.297540] spmic-ldo8: supplied by vdd-1v8-ls [ 3.299143] gpio-510 (gpio_default): hogged as output/high [ 3.300533] gpio-511 (gpio_default): hogged as output/high [ 3.303496] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.439112] max77686-rtc max77620-rtc: registered as rtc0 [ 3.440191] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.440492] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.268083] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.269439] hid: raw HID events driver (C) Jiri Kosina [ 4.270333] usbcore: registered new interface driver usbhid [ 4.270466] usbhid: USB HID core driver [ 4.273019] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.274398] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.433984] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.507785] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.609 ms) ÿá[ 4.358086] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.358563] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.359674] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.360677] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.362418] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.363385] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.364146] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.365768] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.366131] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.368327] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.368635] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.368708] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.375099] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.375121] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.401674] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.408589] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.413102] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.418965] denver_knobs_init:MTS_VERSION:55637613 [ 4.431349] t19x_cache tegra-cache: probed [ 4.434137] optee: probing for conduit method. [ 4.435033] optee: revision 3.16 (65cc2218) [ 4.436064] optee: dynamic shared memory is enabled [ 4.440394] optee: initialized driver [ 4.448028] nvpmodel: initialized successfully [ 4.448598] tegra_hv: get_hvd: not initialized yet [ 4.452406] user_ivc_mempool: hypervisor not present [ 4.458951] usbcore: registered new interface driver snd-usb-audio [ 4.465054] u32 classifier [ 4.466584] input device check on [ 4.470297] Actions configured [ 4.473685] Initializing XFRM netlink socket [ 4.478600] NET: Registered protocol family 10 [ 4.485136] Segment Routing with IPv6 [ 4.485972] NET: Registered protocol family 17 [ 4.490590] NET: Registered protocol family 15 [ 4.494694] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.508166] Bluetooth: RFCOMM socket layer initialized [ 4.513222] Bluetooth: RFCOMM ver 1.11 [ 4.516829] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.522678] Bluetooth: HIDP socket layer initialized [ 4.528647] 9pnet: Installing 9P2000 support [ 4.532337] Key type dns_resolver registered [ 4.537372] registered taskstats version 1 [ 4.540508] Loading compiled-in X.509 certificates [ 4.552993] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.556325] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.566616] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.568527] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.577259] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.585630] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.703344] tegra194-pcie 14160000.pcie: Link up [ 4.705960] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.706135] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.706267] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.706451] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.706674] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.706992] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.707419] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.717419] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.717918] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.718296] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.719864] pci 0004:01:00.0: supports D1 D2 [ 4.720013] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.728881] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.729289] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.729493] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.729832] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.730045] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.732213] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.737997] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.745321] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.754108] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.764298] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.768823] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.774192] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.781216] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.789946] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.791832] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.800496] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.808700] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.924166] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.924743] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.925007] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.925156] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.925396] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.925638] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.926020] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.926465] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.942873] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.943388] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.945249] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.946664] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.948265] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.949494] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.950427] pci 0005:00:00.0: Removing from iommu group 7 [ 5.950680] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.981878] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.004187] host1x 13e10000.host1x: initialized [ 6.006038] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.007073] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.008472] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.009254] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.010404] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.011318] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.012296] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.013019] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.017535] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.024358] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.034080] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.041408] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.051375] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.058156] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.067908] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.075276] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.084844] falcon 15340000.vic: Adding to iommu group 17 [ 6.099321] falcon 15340000.vic: initialized [ 6.100300] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.106169] falcon 15380000.nvjpg: initialized [ 6.106834] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.117846] falcon 154c0000.nvenc: initialized [ 6.118496] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.127889] falcon 15a80000.nvenc1: initialized [ 6.128462] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.139696] nvdec 15480000.nvdec: initialized [ 6.140298] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.150477] nvdec 15140000.nvdec1: initialized [ 6.151004] tsec 15500000.tsec: Adding to iommu group 18 [ 6.156613] tsec 15500000.tsec: initialized [ 6.157056] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.164938] tsec 15100000.tsecb: initialized [ 6.168309] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.195153] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.206952] gpio-374 (wifi-enable): hogged as output/high [ 6.207393] gpio-431 (camera-control-output-low): hogged as output/low [ 6.207661] gpio-432 (camera-control-output-low): hogged as output/low [ 6.209400] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.211124] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.211719] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.216612] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.221832] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.227637] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.233092] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.241204] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.248541] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.259810] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.265308] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.271259] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.280076] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.289215] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.296744] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.304768] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.310481] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.320119] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.326513] pva 16000000.pva0: Adding to iommu group 22 [ 6.352325] pva 16000000.pva0: initialized [ 6.356901] pva 16800000.pva1: Adding to iommu group 23 [ 6.367850] pva 16800000.pva1: initialized [ 6.373025] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.392493] nvdla 15880000.nvdla0: initialized [ 6.393863] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.402732] nvdla 158c0000.nvdla1: initialized [ 6.405814] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.406304] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.407871] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.408204] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.408230] tegradc 15200000.display: Adding to iommu group 26 [ 6.408292] tegradc 15210000.display: Adding to iommu group 26 [ 6.408306] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.408835] tegradccommon 15200000.display-hub: dma mapping done [ 6.409830] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.417551] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.421878] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.428896] generic_infoframe_type: 0x87 [ 6.433877] tegra_cec 3960000.tegra_cec: probed [ 6.438107] tegradc 15200000.display: DT parsed successfully [ 6.443901] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.448272] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.456299] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.469723] kfuse 3830000.kfuse: initialized [ 6.472882] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.473570] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.481246] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.487752] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.488493] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.495881] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.508734] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.518012] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.522374] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.538050] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.539536] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.554791] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.564281] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.564984] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.577128] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.577392] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.603298] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.603672] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.607060] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.615264] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.623845] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.630315] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.638175] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.645299] usb usb1: Product: xHCI Host Controller [ 6.650335] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.656339] usb usb1: SerialNumber: 3610000.xhci [ 6.662227] hub 1-0:1.0: USB hub found [ 6.664915] hub 1-0:1.0: 4 ports detected [ 6.669502] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.674315] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.681908] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.689901] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.697503] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.704840] usb usb2: Product: xHCI Host Controller [ 6.710033] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.715931] usb usb2: SerialNumber: 3610000.xhci [ 6.721919] hub 2-0:1.0: USB hub found [ 6.724426] hub 2-0:1.0: 4 ports detected [ 6.763089] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.768533] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.769824] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.770020] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.783245] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.784270] tegra194-cpufreq ccplex: probed with BWMGR [ 6.785486] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.786072] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.786570] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.787969] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.799700] mmc0: CQHCI version 5.10 [ 6.801364] tegra194-vi5 15c10000.vi: initialized [ 6.803464] tegradc 15210000.display: disp0 connected to head1->sor [ 6.808339] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.815670] tegradc 15210000.display: DT parsed successfully [ 6.816657] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.821263] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.821381] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.827736] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.835233] generic_infoframe_type: 0x87 [ 6.841335] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.849738] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.851274] tegradc 15200000.display: DT parsed successfully [ 6.851339] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.852055] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.852059] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.852062] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.852400] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.852406] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.852547] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.853403] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.853415] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.853612] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.853617] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.855788] tegradc 15200000.display: probed [ 6.931208] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.936246] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.943245] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.965976] mmc0: Command Queue Engine enabled [ 6.968623] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.968633] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.975435] mmc0: periodic cache flush enabled [ 6.975452] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.983297] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.986603] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.000224] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.021633] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.023300] nvethernet 2490000.ethernet: Macsec not supported [ 7.024615] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 7.052397] Console: switching to colour frame buffer device 240x67 [ 7.052837] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 7.058144] tegradc 15200000.display: fb registered [ 7.068994] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 7.074720] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 7.075591] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.082172] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.087975] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.095382] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.108049] tegra-se-nvhost 15810000.se: initialized [ 7.113106] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.118556] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.124516] tegra-se-nvhost 15820000.se: initialized [ 7.130546] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.131287] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.135838] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.143445] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.143450] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.143455] usb 1-2: Manufacturer: Generic [ 7.145473] hub 1-2:1.0: USB hub found [ 7.150312] tegra-se-nvhost 15830000.se: initialized [ 7.158466] hub 1-2:1.0: 4 ports detected [ 7.162775] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.169785] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.170421] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.175667] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.200314] tegra-se-nvhost 15840000.se: initialized [ 7.207932] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.208523] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.214444] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.220441] Extcon AUX1(HDMI) enable [ 7.220587] tegradc 15210000.display: disp1 connected to head1->sor [ 7.228834] tegra_actmon d230000.actmon: in actmon_register()... [ 7.233589] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.237412] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.243628] tegradc 15210000.display: DT parsed successfully [ 7.248079] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.249771] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.256624] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.262424] hvc_sysfs: hypervisor is not present [ 7.267468] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.284870] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.291322] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.302232] ALSA device list: [ 7.308802] tegradc 15210000.display: probed [ 7.310395] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.310410] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.316689] No soundcards found. [ 7.339448] usb 2-3: Manufacturer: Generic [ 7.344018] tegradc 15210000.display: fb registered [ 7.347419] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.350269] hub 2-3:1.0: USB hub found [ 7.356153] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.356162] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.373161] tegradc 15200000.display: blank - powerdown [ 7.374059] Freeing unused kernel memory: 3968K [ 7.374991] hub 2-3:1.0: 4 ports detected [ 7.379272] Run /init as init process [ 7.403279] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.420220] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.420225] Extcon AUX1(HDMI) disable [ 7.443432] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.444290] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.457373] tegradc 15200000.display: unblank [ 7.458445] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.458637] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.459210] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.459215] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.464407] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.466229] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.470246] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.470250] Extcon AUX1(HDMI) enable [ 7.482996] tegradc 15200000.display: sync windows ret = 247 [ 7.515705] tegradc 15210000.display: blank - powerdown [ 7.517184] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.517188] Extcon DP: HPD disabled [ 7.517192] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.517207] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.517212] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.538871] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.546087] Extcon HDMI: HPD enabled [ 7.549817] tegradc 15200000.display: hdmi: plugged [ 7.555783] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.562785] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.570105] usb 1-3: Product: Bluetooth Radio [ 7.574519] usb 1-3: Manufacturer: Realtek [ 7.578451] usb 1-3: SerialNumber: 00e04c000001 [ 7.593254] Root device found: mmcblk0p1 [ 7.596808] Found dev node: /dev/mmcblk0p1 [ 7.633052] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.638627] Rootfs mounted over mmcblk0p1 [ 7.683722] Switching from initrd to actual rootfs [ 7.849457] systemd[1]: System time before build time, advancing clock. [ 7.865793] random: crng init done [ 7.923615] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.928705] systemd[1]: Detected architecture arm64. [ 7.966555] systemd[1]: Set hostname to . [ 8.132472] systemd-sysv-generator[243]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.487700] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.489579] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.495299] systemd[1]: Created slice system-modprobe.slice. [ 8.500220] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.504586] systemd[1]: Created slice User and Session Slice. [ 8.508299] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.512575] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.516130] systemd[1]: Reached target User and Group Name Lookups. [ 8.519477] systemd[1]: Reached target Slices. [ 8.522684] systemd[1]: Reached target Swap. [ 8.526806] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.530533] systemd[1]: Listening on Syslog Socket. [ 8.534294] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.537778] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.542117] systemd[1]: Listening on Journal Audit Socket. [ 8.545871] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.549786] systemd[1]: Listening on Journal Socket. [ 8.554419] systemd[1]: Listening on udev Control Socket. [ 8.559836] systemd[1]: Listening on udev Kernel Socket. [ 8.568413] systemd[1]: Mounting Huge Pages File System... [ 8.576685] systemd[1]: Mounting POSIX Message Queue File System... [ 8.584946] systemd[1]: Mounting RPC Pipe File System... [ 8.593548] systemd[1]: Mounting Kernel Debug File System... [ 8.602009] systemd[1]: Mounting Kernel Trace File System... [ 8.612016] systemd[1]: Starting Journal Service... [ 8.620781] systemd[1]: Starting Set the console keyboard layout... [ 8.629054] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.633239] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.641024] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.650436] systemd[1]: Started Nameserver information manager. [ 8.654769] systemd[1]: Reached target Network (Pre). [ 8.661279] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.663224] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.671070] systemd[1]: Starting Load Kernel Modules... [ 8.679048] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.687879] systemd[1]: Starting udev Coldplug all Devices... [ 8.697942] systemd[1]: Mounted Huge Pages File System. [ 8.701904] systemd[1]: Mounted POSIX Message Queue File System. [ 8.705851] systemd[1]: Mounted RPC Pipe File System. [ 8.710043] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.710484] systemd[1]: Mounted Kernel Debug File System. [ 8.711883] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.715372] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.715379] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.715389] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.715393] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.715647] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.715805] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.715967] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.726017] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.730773] systemd[1]: Mounted Kernel Trace File System. [ 8.737106] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.741894] systemd[1]: nvfb-udev.service: Succeeded. [ 8.747294] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.758822] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.771385] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.773152] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.779721] systemd[1]: Starting Load/Save Random Seed... [ 8.789168] systemd[1]: Starting Create System Users... [ 8.825032] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.825032] [ 8.837665] systemd[1]: Finished Load/Save Random Seed. [ 8.850305] systemd[1]: Finished Create System Users. [ 8.857004] systemd[1]: Finished Load Kernel Modules. [ 8.861367] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.868715] systemd[1]: Mounting Kernel Configuration File System... [ 8.876147] systemd[1]: Started OP-TEE Client Supplicant. [ 8.885838] systemd[1]: Starting Apply Kernel Variables... [ 8.893653] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.904361] systemd[1]: Finished Set the console keyboard layout. [ 8.908479] systemd[1]: Mounted Kernel Configuration File System. [ 10.223585] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.230242] imx219 9-0010: board setup failed [ 10.231735] imx219: probe of 9-0010 failed with error -121 [ 10.244189] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.251417] imx219 10-0010: board setup failed [ 10.256551] imx219: probe of 10-0010 failed with error -121 [ 10.345279] hot-surface-alert cooling state: 0 -> 1 [ 11.038906] using random self ethernet address [ 11.067902] using random host ethernet address [ 11.884756] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.886399] Creating 1 MTD partitions on "spi6.0": [ 11.886409] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.540500] using random self ethernet address [ 12.542183] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.788799] nvidia: loading out-of-tree module taints kernel. [ 59.444839] watchdog: watchdog0: watchdog did not stop! [ 59.904188] Trying to unregister non-registered hwtime source [ 62.962697] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.964273] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERRÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.480] I> register 'maxim' power off handle [0003.482] I> virtual i2c enabled [0003.483] I> registered 'maxim,max20024' pmic [0003.483] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.745] initializing target [0003.746] calling apps_init() [0003.747] starting app kernel_boot_app [0003.747] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000711] Console: colour dummy device 80x25 [ 0.002250] printk: console [tty0] enabled [ 0.002329] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002367] pid_max: default: 32768 minimum: 301 [ 0.002539] LSM: Security Framework initializing [ 0.002597] Yama: becoming mindful. [ 0.002660] SELinux: Initializing. [ 0.002848] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002887] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005758] rcu: Hierarchical SRCU implementation. [ 0.006026] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006913] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006978] DTB Build time: Aug 10 2022 20:31:49 [ 0.009701] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009936] Remapping and enabling EFI services. [ 0.011999] smp: Bringing up secondary CPUs ... [ 0.041917] Detected PIPT I-cache on CPU1 [ 0.041974] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071690] Detected PIPT I-cache on CPU2 [ 0.071767] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101356] Detected PIPT I-cache on CPU3 [ 0.101427] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131034] Detected PIPT I-cache on CPU4 [ 0.131111] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160624] Detected PIPT I-cache on CPU5 [ 0.160690] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160972] smp: Brought up 1 node, 6 CPUs [ 0.161243] SMP: Total of 6 processors activated. [ 0.161289] CPU features: detected: Privileged Access Never [ 0.161318] CPU features: detected: LSE atomic instructions [ 0.161338] CPU features: detected: User Access Override [ 0.161356] CPU features: detected: 32-bit EL0 Support [ 0.161374] CPU features: detected: RAS Extension Support [ 0.161391] CPU features: detected: CRC32 instructions [ 0.161409] CPU features: detected: 32-bit EL1 Support [ 0.228509] CPU: All CPU(s) started at EL2 [ 0.234540] devtmpfs: initialized [ 0.305257] Registered cp15_barrier emulation handler [ 0.305348] Registered setend emulation handler [ 0.305379] KASLR enabled [ 0.305644] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.305699] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.307760] pinctrl core: initialized pinctrl subsystem [ 0.308758] SMBIOS 3.0.0 present. [ 0.308804] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.309738] NET: Registered protocol family 16 [ 0.312218] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.313038] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.314401] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.314505] audit: initializing netlink subsys (disabled) [ 0.314908] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1 [ 0.315498] thermal_sys: Registered thermal governor 'step_wise' [ 0.315512] thermal_sys: Registered thermal governor 'power_allocator' [ 0.315547] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.318856] cpuidle: using governor menu [ 0.319340] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.319971] ASID allocator initialised with 32768 entries [ 0.320395] Serial: AMBA PL011 UART driver [ 0.325315] Tegra reboot handler registered. [ 0.411134] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.411345] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.411645] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.411716] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.411915] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.412013] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.412220] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.412284] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.412497] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.412563] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.416387] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.416463] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.416513] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.416573] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.416624] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.416662] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.416700] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.416736] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.416772] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.416808] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.416848] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.416886] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.416922] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.416958] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.416993] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.417028] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.417064] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.417223] mc-err: mcerr ops are set to t19x [ 0.432182] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.432216] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.432241] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.432264] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.440373] ACPI: Interpreter disabled. [ 0.441970] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.443740] iommu: Default domain type: Translated [ 0.443843] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.444441] SCSI subsystem initialized [ 0.444630] usbcore: registered new interface driver usbfs [ 0.444680] usbcore: registered new interface driver hub [ 0.444723] usbcore: registered new device driver usb [ 0.445344] mc: Linux media interface: v0.10 [ 0.445385] videodev: Linux video capture interface: v2.00 [ 0.445869] pps_core: LinuxPPS API ver. 1 registered [ 0.445888] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.445917] PTP clock support registered [ 0.446222] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.446592] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.446717] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.447638] Registered efivars operations [ 0.455525] FPGA manager framework [ 0.455651] Advanced Linux Sound Architecture Driver Initialized. [ 0.456448] Bluetooth: Core ver 2.22 [ 0.456502] NET: Registered protocol family 31 [ 0.456519] Bluetooth: HCI device and connection manager initialized [ 0.456540] Bluetooth: HCI socket layer initialized [ 0.456586] Bluetooth: L2CAP socket layer initialized [ 0.456622] Bluetooth: SCO socket layer initialized [ 0.458458] camchar: rtcpu character device driver loaded [ 0.459442] clocksource: Switched to clocksource arch_sys_counter [ 0.874079] VFS: Disk quotas dquot_6.6.0 [ 0.874174] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.874653] pnp: PnP ACPI: disabled [ 0.887798] la/ptsa driver initialized. [ 0.888013] NET: Registered protocol family 2 [ 0.888245] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.895923] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.896092] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.896457] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.897082] TCP: Hash tables configured (established 65536 bind 65536) [ 0.897234] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.897369] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.897702] NET: Registered protocol family 1 [ 0.898578] RPC: Registered named UNIX socket transport module. [ 0.898613] RPC: Registered udp transport module. [ 0.898633] RPC: Registered tcp transport module. [ 0.898651] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.898702] PCI: CLS 0 bytes, default 64 [ 0.899003] Trying to unpack rootfs image as initramfs... [ 1.158993] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.161904] Freeing initrd memory: 8196K [ 1.166377] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.166424] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.166470] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.166820] kvm [1]: IPA Size Limit: 40 bits [ 1.167343] kvm [1]: vgic interrupt IRQ9 [ 1.167812] kvm [1]: VHE mode initialized successfully [ 1.169253] Initialise system trusted keyrings [ 1.169578] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.175102] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.175974] NFS: Registering the id_resolver key type [ 1.176042] Key type id_resolver registered [ 1.176065] Key type id_legacy registered [ 1.176165] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.176197] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.176246] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.186090] NET: Registered protocol family 38 [ 1.186152] Key type asymmetric registered [ 1.186177] Asymmetric key parser 'x509' registered [ 1.186264] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.186464] io scheduler mq-deadline registered [ 1.186486] io scheduler kyber registered [ 1.192487] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.195636] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.195717] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.195790] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.195862] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.195938] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.201818] scrncapt: init (heads:4 wins:6 planes:4) [ 1.201872] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.203013] EINJ: ACPI disabled. [ 1.206570] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.206598] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.206643] tegra-pmc: ### PMC reset level: L1 [ 1.206658] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.206713] tegra-pmc: PMC Prod config success [ 1.212134] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.217889] random: fast init done [ 1.218248] printk: console [ttyTCU0] enabled [ 2.769941] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.774212] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.778800] arm-smmu 10000000.iommu: stage 1 translation [ 2.784318] arm-smmu 10000000.iommu: stage 2 translation [ 2.789734] arm-smmu 10000000.iommu: nested translation [ 2.795076] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.802250] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.811631] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.815363] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.821943] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.829559] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.835256] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.839709] arm-smmu 12000000.iommu: stage 1 translation [ 2.845484] arm-smmu 12000000.iommu: stage 2 translation [ 2.850654] arm-smmu 12000000.iommu: nested translation [ 2.856319] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.863241] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.872238] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.876620] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.882920] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.890495] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.900182] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.903286] tegra_profiler: auth: init [ 2.907822] THERMAL EST: found 3 subdevs [ 2.910997] THERMAL EST num_resources: 0 [ 2.915135] [THERMAL EST subdev 0] [ 2.918444] [THERMAL EST subdev 1] [ 2.921598] [THERMAL EST subdev 2] [ 2.924841] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.931543] THERMAL EST: thz register success. [ 2.935550] THERMAL EST: end of probe, return err: 0 [ 2.940802] nvsciipc: loaded module [ 2.947480] tun: Universal TUN/TAP device driver, 1.6 [ 2.950440] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.956871] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.962186] e1000e: Intel(R) PRO/1000 Network Driver [ 2.967364] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.973433] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.978745] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.984630] PPP generic driver version 2.4.2 [ 2.988878] PPP BSD Compression module registered [ 2.993715] PPP Deflate Compression module registered [ 2.998696] PPP MPPE Compression module registered [ 3.003980] usbcore: registered new interface driver r8152 [ 3.009214] usbcore: registered new interface driver asix [ 3.014543] usbcore: registered new interface driver ax88179_178a [ 3.020926] usbcore: registered new interface driver cdc_ether [ 3.026890] usbcore: registered new interface driver net1080 [ 3.032477] usbcore: registered new interface driver cdc_subset [ 3.038574] usbcore: registered new interface driver zaurus [ 3.043971] usbcore: registered new interface driver cdc_ncm [ 3.049630] usbcore: registered new interface driver aqc111 [ 3.055619] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.061362] ohci-pci: OHCI PCI platform driver [ 3.065671] ohci-platform: OHCI generic platform driver [ 3.071668] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.077535] usbcore: registered new interface driver uas [ 3.081964] usbcore: registered new interface driver usb-storage [ 3.088029] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.093938] mousedev: PS/2 mouse device common for all mice [ 3.099105] usbcore: registered new interface driver xpad [ 3.107258] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.110130] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.117660] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.124412] i2c /dev entries driver [ 3.127733] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.133440] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.138935] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.144252] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.149685] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.154859] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.160299] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.174083] device-mapper: uevent: version 1.0.3 [ 3.174555] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.180874] cpuidle: Initializing cpuidle driver [ 3.184729] sdhci: Secure Digital Host Controller Interface driver [ 3.189701] sdhci: Copyright(c) Pierre Ossman [ 3.193558] Synopsys Designware Multimedia Card Interface Driver [ 3.200023] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.205992] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.211715] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.219056] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.242336] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.252017] vdd-1v0: supplied by regulator-dummy [ 3.257482] vdd-1v8-hs: supplied by regulator-dummy [ 3.262276] vdd-1v8-ls: supplied by regulator-dummy [ 3.267095] vdd-1v8-ao: supplied by regulator-dummy [ 3.271016] vddio-ddr-1v1: supplied by regulator-dummy [ 3.275516] vdd-rtc: supplied by regulator-dummy [ 3.277262] spmic-ldo1: supplied by regulator-dummy [ 3.278510] vdd-ao-3v3: supplied by regulator-dummy [ 3.284802] vddio-emmc-3v3: supplied by regulator-dummy [ 3.291085] spmic-ldo4: supplied by regulator-dummy [ 3.292334] vdd-usb-3v3: supplied by regulator-dummy [ 3.298519] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.304714] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.310319] spmic-ldo8: supplied by vdd-1v8-ls [ 3.311825] gpio-510 (gpio_default): hogged as output/high [ 3.313197] gpio-511 (gpio_default): hogged as output/high [ 3.316179] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.452215] max77686-rtc max77620-rtc: registered as rtc0 [ 3.453595] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.453964] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.284319] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.285711] hid: raw HID events driver (C) Jiri Kosina [ 4.286649] usbcore: registered new interface driver usbhid [ 4.286808] usbhid: USB HID core driver [ 4.289333] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.290732] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.102250] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.175728] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.287 ms) ÿá[ 4.374258] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.374965] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.376109] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.377072] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.378873] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.379807] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.380488] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.382065] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.382304] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.385478] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.390555] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.397412] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.402343] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.407903] denver_knobs_init:MTS_VERSION:55637613 [ 4.420777] t19x_cache tegra-cache: probed [ 4.423712] optee: probing for conduit method. [ 4.424587] optee: revision 3.16 (65cc2218) [ 4.425559] optee: dynamic shared memory is enabled [ 4.429191] optee: initialized driver [ 4.436824] nvpmodel: initialized successfully [ 4.437470] tegra_hv: get_hvd: not initialized yet [ 4.441694] user_ivc_mempool: hypervisor not present [ 4.447403] usbcore: registered new interface driver snd-usb-audio [ 4.454286] u32 classifier [ 4.455116] input device check on [ 4.458921] Actions configured [ 4.462822] Initializing XFRM netlink socket [ 4.467762] NET: Registered protocol family 10 [ 4.474397] Segment Routing with IPv6 [ 4.475006] NET: Registered protocol family 17 [ 4.479074] NET: Registered protocol family 15 [ 4.483735] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.497294] Bluetooth: RFCOMM socket layer initialized [ 4.502009] Bluetooth: RFCOMM ver 1.11 [ 4.505844] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.511426] Bluetooth: HIDP socket layer initialized [ 4.517238] 9pnet: Installing 9P2000 support [ 4.520856] Key type dns_resolver registered [ 4.526428] registered taskstats version 1 [ 4.529411] Loading compiled-in X.509 certificates [ 4.543004] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.545492] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.555355] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.557291] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.566064] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.574303] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.691492] tegra194-pcie 14160000.pcie: Link up [ 4.694561] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.694745] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.694879] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.695152] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.695379] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.695774] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.696266] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.709345] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.709776] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.710373] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.712194] pci 0004:01:00.0: supports D1 D2 [ 4.712352] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.724934] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.725350] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.725616] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.726074] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.726417] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.726575] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.726777] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.733848] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.742273] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.752608] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.757172] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.762824] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.769682] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.778696] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.780013] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.788681] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.796994] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.903651] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.904139] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.904320] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.904539] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.904802] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.905032] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.905497] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.905917] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.931236] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.931786] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.933865] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.935146] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.936753] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.938405] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.939343] pci 0005:00:00.0: Removing from iommu group 7 [ 5.939724] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.975836] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.001660] host1x 13e10000.host1x: initialized [ 6.003351] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.004374] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.005909] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.006609] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.008233] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.009213] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.010638] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.011637] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.013179] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.014036] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.015739] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.020631] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.030731] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.037872] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.047866] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.054588] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.064735] falcon 15340000.vic: Adding to iommu group 17 [ 6.079420] falcon 15340000.vic: initialized [ 6.080460] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.086638] falcon 15380000.nvjpg: initialized [ 6.087336] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.097504] falcon 154c0000.nvenc: initialized [ 6.098120] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.107582] falcon 15a80000.nvenc1: initialized [ 6.108136] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.120103] nvdec 15480000.nvdec: initialized [ 6.120608] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.130104] nvdec 15140000.nvdec1: initialized [ 6.130612] tsec 15500000.tsec: Adding to iommu group 18 [ 6.137340] tsec 15500000.tsec: initialized [ 6.137923] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.145346] tsec 15100000.tsecb: initialized [ 6.149602] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.178589] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.191668] gpio-374 (wifi-enable): hogged as output/high [ 6.191952] gpio-431 (camera-control-output-low): hogged as output/low [ 6.192205] gpio-432 (camera-control-output-low): hogged as output/low [ 6.193871] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.195815] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.196353] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.197707] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.201283] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.207027] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.212652] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.220906] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.228347] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.240026] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.245088] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.250921] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.259499] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.268990] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.276309] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.283683] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.290076] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.299523] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.305977] pva 16000000.pva0: Adding to iommu group 22 [ 6.332921] pva 16000000.pva0: initialized [ 6.337609] pva 16800000.pva1: Adding to iommu group 23 [ 6.349550] pva 16800000.pva1: initialized [ 6.354332] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.367344] nvdla 15880000.nvdla0: initialized [ 6.368821] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.377609] nvdla 158c0000.nvdla1: initialized [ 6.382622] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.382854] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.383021] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.383067] tegradc 15200000.display: Adding to iommu group 26 [ 6.383592] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.384437] tegradccommon 15200000.display-hub: dma mapping done [ 6.384773] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.390450] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.391792] tegradc 15210000.display: Adding to iommu group 26 [ 6.392238] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.392436] generic_infoframe_type: 0x87 [ 6.392554] tegradc 15200000.display: DT parsed successfully [ 6.392666] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.395668] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.403292] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.407531] tegra_cec 3960000.tegra_cec: probed [ 6.408822] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.411751] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.420049] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.425191] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.431818] kfuse 3830000.kfuse: initialized [ 6.440761] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.444882] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.449870] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.457941] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.458592] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.466167] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.473808] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.481564] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.485179] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.490859] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.496486] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.505842] tegradc 15210000.display: disp0 connected to head1->sor [ 6.509934] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.519289] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.540992] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.548260] tegradc 15210000.display: DT parsed successfully [ 6.590558] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.605079] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.607870] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.613736] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.621738] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.630177] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.637242] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.644568] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.651674] usb usb1: Product: xHCI Host Controller [ 6.656646] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.662860] usb usb1: SerialNumber: 3610000.xhci [ 6.668868] hub 1-0:1.0: USB hub found [ 6.671819] hub 1-0:1.0: 4 ports detected [ 6.676293] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.680915] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.688770] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.696381] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.704359] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.711397] usb usb2: Product: xHCI Host Controller [ 6.716575] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.722832] usb usb2: SerialNumber: 3610000.xhci [ 6.728181] hub 2-0:1.0: USB hub found [ 6.731219] hub 2-0:1.0: 4 ports detected [ 6.773638] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.780243] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.782164] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.782363] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.795997] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.797065] tegra194-cpufreq ccplex: probed with BWMGR [ 6.798591] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.799113] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.799597] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.800805] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.807827] tegra194-vi5 15c10000.vi: initialized [ 6.809512] mmc0: CQHCI version 5.10 [ 6.810070] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.811543] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.815124] generic_infoframe_type: 0x87 [ 6.821580] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.825063] tegradc 15200000.display: DT parsed successfully [ 6.833259] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.838687] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.845784] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.860094] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.860139] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.868212] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.868216] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.868576] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.874965] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.879557] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.882913] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.886050] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.891169] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.897642] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.903821] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.905125] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.911620] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.923853] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.925996] tegradc 15200000.display: probed [ 6.939518] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.972770] mmc0: Command Queue Engine enabled [ 6.975857] nvethernet 2490000.ethernet: Macsec not supported [ 6.992665] mmc0: periodic cache flush enabled [ 6.997043] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.003879] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 7.003972] Console: switching to colour frame buffer device 240x67 [ 7.004253] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.005363] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 7.005490] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.005606] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.011688] tegradc 15200000.display: fb registered [ 7.012748] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.017969] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.022274] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.029149] tegra-se-nvhost 15810000.se: initialized [ 7.036369] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.039704] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.046980] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.047526] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.053432] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.061254] tegra-se-nvhost 15820000.se: initialized [ 7.106967] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.110487] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.116466] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.116472] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.116476] usb 1-2: Manufacturer: Generic [ 7.121474] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.123587] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.135073] hub 1-2:1.0: USB hub found [ 7.139533] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.139980] tegra-se-nvhost 15830000.se: initialized [ 7.141265] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.141850] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.142492] tegra-se-nvhost 15840000.se: initialized [ 7.144364] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.145900] tegra_actmon d230000.actmon: in actmon_register()... [ 7.146057] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.146416] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.146942] hvc_sysfs: hypervisor is not present [ 7.149264] hub 1-2:1.0: 4 ports detected [ 7.154332] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.173488] ALSA device list: [ 7.174460] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.174464] Extcon AUX1(HDMI) enable [ 7.174615] tegradc 15210000.display: disp1 connected to head1->sor [ 7.174794] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.174895] tegradc 15210000.display: DT parsed successfully [ 7.174932] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.175045] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.175051] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.179011] random: crng init done [ 7.183010] No soundcards found. [ 7.190438] tegradc 15210000.display: probed [ 7.236315] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.301838] tegradc 15210000.display: fb registered [ 7.305257] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.308642] Freeing unused kernel memory: 3968K [ 7.313939] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.313949] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.332339] tegradc 15200000.display: blank - powerdown [ 7.336971] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.336977] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.336981] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.336985] usb 2-3: Manufacturer: Generic [ 7.343603] Run /init as init process [ 7.348059] hub 2-3:1.0: USB hub found [ 7.349982] hub 2-3:1.0: 4 ports detected [ 7.371880] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.371884] Extcon AUX1(HDMI) disable [ 7.395253] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.395476] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.395502] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.396210] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.409138] tegradc 15200000.display: unblank [ 7.410224] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.410429] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.416439] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.418315] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.422380] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.422384] Extcon AUX1(HDMI) enable [ 7.435099] tegradc 15200000.display: sync windows ret = 247 [ 7.455483] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.477492] tegradc 15210000.display: blank - powerdown [ 7.482473] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.482477] Extcon DP: HPD disabled [ 7.482482] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.482495] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.482500] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.514285] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.521405] Extcon HDMI: HPD enabled [ 7.525063] tegradc 15200000.display: hdmi: plugged [ 7.564960] Root device found: mmcblk0p1 [ 7.568619] Found dev node: /dev/mmcblk0p1 [ 7.605589] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.611131] Rootfs mounted over mmcblk0p1 [ 7.632732] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.634265] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.635718] usb 1-3: Product: Bluetooth Radio [ 7.637080] usb 1-3: Manufacturer: Realtek [ 7.638417] usb 1-3: SerialNumber: 00e04c000001 [ 7.656574] Switching from initrd to actual rootfs [ 7.809051] systemd[1]: System time before build time, advancing clock. [ 7.884418] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.889446] systemd[1]: Detected architecture arm64. [ 7.938335] systemd[1]: Set hostname to . [ 8.103741] systemd-sysv-generator[240]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.459904] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.461651] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.467346] systemd[1]: Created slice system-modprobe.slice. [ 8.472130] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.476365] systemd[1]: Created slice User and Session Slice. [ 8.479936] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.484133] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.487702] systemd[1]: Reached target User and Group Name Lookups. [ 8.490937] systemd[1]: Reached target Slices. [ 8.494131] systemd[1]: Reached target Swap. [ 8.498233] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.502039] systemd[1]: Listening on Syslog Socket. [ 8.505741] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.509266] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.513609] systemd[1]: Listening on Journal Audit Socket. [ 8.517433] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.521467] systemd[1]: Listening on Journal Socket. [ 8.525346] systemd[1]: Listening on udev Control Socket. [ 8.529074] systemd[1]: Listening on udev Kernel Socket. [ 8.537745] systemd[1]: Mounting Huge Pages File System... [ 8.547642] systemd[1]: Mounting POSIX Message Queue File System... [ 8.557387] systemd[1]: Mounting RPC Pipe File System... [ 8.566292] systemd[1]: Mounting Kernel Debug File System... [ 8.575218] systemd[1]: Mounting Kernel Trace File System... [ 8.585662] systemd[1]: Starting Journal Service... [ 8.594985] systemd[1]: Starting Set the console keyboard layout... [ 8.603382] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.607151] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.613583] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.621641] systemd[1]: Started Nameserver information manager. [ 8.626091] systemd[1]: Reached target Network (Pre). [ 8.633972] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.635754] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.644311] systemd[1]: Starting Load Kernel Modules... [ 8.651990] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.660270] systemd[1]: Starting udev Coldplug all Devices... [ 8.670513] systemd[1]: Mounted Huge Pages File System. [ 8.674179] systemd[1]: Mounted POSIX Message Queue File System. [ 8.677745] systemd[1]: Mounted RPC Pipe File System. [ 8.681271] systemd[1]: Mounted Kernel Debug File System. [ 8.685025] systemd[1]: Mounted Kernel Trace File System. [ 8.685818] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.688460] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.688466] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.688475] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.688479] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.688859] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.689041] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.689049] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.689500] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.700510] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.709564] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.714140] systemd[1]: nvfb-udev.service: Succeeded. [ 8.719668] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.730975] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.743360] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.745163] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.752931] systemd[1]: Starting Load/Save Random Seed... [ 8.761464] systemd[1]: Starting Create System Users... [ 8.779298] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.779298] [ 8.815994] systemd[1]: Finished Load/Save Random Seed. [ 8.824497] systemd[1]: Finished Load Kernel Modules. [ 8.829618] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.836373] systemd[1]: Mounting Kernel Configuration File System... [ 8.843997] systemd[1]: Started OP-TEE Client Supplicant. [ 8.852986] systemd[1]: Starting Apply Kernel Variables... [ 8.862848] systemd[1]: Finished Set the console keyboard layout. [ 8.868700] systemd[1]: Mounted Kernel Configuration File System. [ 8.880518] systemd[1]: Finished Create System Users. [ 10.351920] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.360769] imx219 9-0010: board setup failed [ 10.363990] imx219: probe of 9-0010 failed with error -121 [ 10.391485] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.397940] imx219 10-0010: board setup failed [ 10.399320] imx219: probe of 10-0010 failed with error -121 [ 10.537137] hot-surface-alert cooling state: 0 -> 1 [ 10.895045] using random self ethernet address [ 10.919679] using random host ethernet address [ 12.045424] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.047762] Creating 1 MTD partitions on "spi6.0": [ 12.049799] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.510352] using random self ethernet address [ 12.510359] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.876432] nvidia: loading out-of-tree module taints kernel. [ 58.665624] watchdog: watchdog0: watchdog did not stop! [ 59.145270] Trying to unregister non-registered hwtime source [ 62.209586] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.211193] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 Ûÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized ÿä1ÿânoc_late initialized pm_post initialized dbells initialized ÿä1 03ÿâdmce initialized cvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 aÿâavfs_clk_platform_post initialized ÿäarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNING:ÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.645] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.647] I> width = 720, height = 480, frequency = 26973026 [0003.651] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.745] initializing target [0003.745] calling apps_init() [0003.746] starting app kernel_boot_app [0003.747] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000969] Console: colour dummy device 80x25 [ 0.002480] printk: console [tty0] enabled [ 0.002541] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002576] pid_max: default: 32768 minimum: 301 [ 0.002828] LSM: Security Framework initializing [ 0.002911] Yama: becoming mindful. [ 0.002963] SELinux: Initializing. [ 0.003147] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003189] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006266] rcu: Hierarchical SRCU implementation. [ 0.006538] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.008146] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.008250] DTB Build time: Aug 10 2022 20:31:49 [ 0.013226] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.013620] Remapping and enabling EFI services. [ 0.015739] smp: Bringing up secondary CPUs ... [ 0.044909] Detected PIPT I-cache on CPU1 [ 0.045048] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075032] Detected PIPT I-cache on CPU2 [ 0.075176] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104739] Detected PIPT I-cache on CPU3 [ 0.104873] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134598] Detected PIPT I-cache on CPU4 [ 0.134816] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164540] Detected PIPT I-cache on CPU5 [ 0.164732] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165093] smp: Brought up 1 node, 6 CPUs [ 0.165500] SMP: Total of 6 processors activated. [ 0.165580] CPU features: detected: Privileged Access Never [ 0.165613] CPU features: detected: LSE atomic instructions [ 0.165637] CPU features: detected: User Access Override [ 0.165660] CPU features: detected: 32-bit EL0 Support [ 0.165682] CPU features: detected: RAS Extension Support [ 0.165704] CPU features: detected: CRC32 instructions [ 0.165727] CPU features: detected: 32-bit EL1 Support [ 0.237842] CPU: All CPU(s) started at EL2 [ 0.244154] devtmpfs: initialized [ 0.291547] Registered cp15_barrier emulation handler [ 0.291666] Registered setend emulation handler [ 0.291690] KASLR enabled [ 0.291971] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291998] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293367] pinctrl core: initialized pinctrl subsystem [ 0.294597] SMBIOS 3.0.0 present. [ 0.294630] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.295229] NET: Registered protocol family 16 [ 0.297182] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.297692] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.298410] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.298477] audit: initializing netlink subsys (disabled) [ 0.298777] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.299227] thermal_sys: Registered thermal governor 'step_wise' [ 0.299236] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299254] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.301469] cpuidle: using governor menu [ 0.301748] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.302171] ASID allocator initialised with 32768 entries [ 0.302434] Serial: AMBA PL011 UART driver [ 0.305809] Tegra reboot handler registered. [ 0.373595] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.373737] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.373925] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.373967] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.374088] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.374122] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.374229] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.374262] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.374392] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.374445] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.377089] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.377128] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.377152] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.377176] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.377202] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.377226] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.377249] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.377272] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.377312] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.377335] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.377372] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.377427] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.377453] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.377495] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.377518] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.377540] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.377563] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.377651] mc-err: mcerr ops are set to t19x [ 0.389718] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.389742] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.389755] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.389768] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.396520] ACPI: Interpreter disabled. [ 0.397733] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.398976] iommu: Default domain type: Translated [ 0.399048] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.399384] SCSI subsystem initialized [ 0.399545] usbcore: registered new interface driver usbfs [ 0.399599] usbcore: registered new interface driver hub [ 0.399631] usbcore: registered new device driver usb [ 0.399993] mc: Linux media interface: v0.10 [ 0.400021] videodev: Linux video capture interface: v2.00 [ 0.400313] pps_core: LinuxPPS API ver. 1 registered [ 0.400325] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.400345] PTP clock support registered [ 0.400546] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.400881] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.400966] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.401490] Registered efivars operations [ 0.406368] FPGA manager framework [ 0.406469] Advanced Linux Sound Architecture Driver Initialized. [ 0.407024] Bluetooth: Core ver 2.22 [ 0.407066] NET: Registered protocol family 31 [ 0.407078] Bluetooth: HCI device and connection manager initialized [ 0.407093] Bluetooth: HCI socket layer initialized [ 0.407108] Bluetooth: L2CAP socket layer initialized [ 0.407129] Bluetooth: SCO socket layer initialized [ 0.408549] camchar: rtcpu character device driver loaded [ 0.409195] clocksource: Switched to clocksource arch_sys_counter [ 0.698617] VFS: Disk quotas dquot_6.6.0 [ 0.698706] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.699068] pnp: PnP ACPI: disabled [ 0.710403] la/ptsa driver initialized. [ 0.710530] NET: Registered protocol family 2 [ 0.710695] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.716866] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.716938] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.717253] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.717687] TCP: Hash tables configured (established 65536 bind 65536) [ 0.717796] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.717885] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.718102] NET: Registered protocol family 1 [ 0.718752] RPC: Registered named UNIX socket transport module. [ 0.718767] RPC: Registered udp transport module. [ 0.718777] RPC: Registered tcp transport module. [ 0.718786] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.718802] PCI: CLS 0 bytes, default 64 [ 0.719003] Trying to unpack rootfs image as initramfs... [ 0.899533] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.901912] Freeing initrd memory: 8196K [ 0.905518] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.905563] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.905626] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.905987] kvm [1]: IPA Size Limit: 40 bits [ 0.906516] kvm [1]: vgic interrupt IRQ9 [ 0.907036] kvm [1]: VHE mode initialized successfully [ 0.908374] Initialise system trusted keyrings [ 0.908696] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.914830] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.915691] NFS: Registering the id_resolver key type [ 0.915724] Key type id_resolver registered [ 0.915772] Key type id_legacy registered [ 0.915866] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.915915] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.915954] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.925875] NET: Registered protocol family 38 [ 0.925898] Key type asymmetric registered [ 0.925913] Asymmetric key parser 'x509' registered [ 0.925955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.926170] io scheduler mq-deadline registered [ 0.926195] io scheduler kyber registered [ 0.931864] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.934762] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.934841] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.934912] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.934978] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.935048] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.940590] scrncapt: init (heads:4 wins:6 planes:4) [ 0.940826] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.941789] EINJ: ACPI disabled. [ 0.945307] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.945333] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.945347] tegra-pmc: ### PMC reset level: L1 [ 0.945361] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.945409] tegra-pmc: PMC Prod config success [ 0.950633] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.956142] random: fast init done [ 0.956364] printk: console [ttyTCU0] enabled [ 2.507993] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.512555] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.517420] arm-smmu 10000000.iommu: stage 1 translation [ 2.522554] arm-smmu 10000000.iommu: stage 2 translation [ 2.528321] arm-smmu 10000000.iommu: nested translation [ 2.533400] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.540832] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.551155] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.553698] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.560520] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.568156] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.573331] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.578288] arm-smmu 12000000.iommu: stage 1 translation [ 2.583533] arm-smmu 12000000.iommu: stage 2 translation [ 2.589217] arm-smmu 12000000.iommu: nested translation [ 2.594388] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.601826] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.612186] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.614694] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.621250] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.628640] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.638687] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.641919] tegra_profiler: auth: init [ 2.646164] THERMAL EST: found 3 subdevs [ 2.649601] THERMAL EST num_resources: 0 [ 2.653461] [THERMAL EST subdev 0] [ 2.656486] [THERMAL EST subdev 1] [ 2.659928] [THERMAL EST subdev 2] [ 2.663426] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.669675] THERMAL EST: thz register success. [ 2.673866] THERMAL EST: end of probe, return err: 0 [ 2.679401] nvsciipc: loaded module [ 2.686737] tun: Universal TUN/TAP device driver, 1.6 [ 2.688954] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.695193] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.700741] e1000e: Intel(R) PRO/1000 Network Driver [ 2.705423] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.711495] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.717052] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.723237] PPP generic driver version 2.4.2 [ 2.727250] PPP BSD Compression module registered [ 2.732070] PPP Deflate Compression module registered [ 2.737276] PPP MPPE Compression module registered [ 2.742028] usbcore: registered new interface driver r8152 [ 2.747798] usbcore: registered new interface driver asix [ 2.753123] usbcore: registered new interface driver ax88179_178a [ 2.759256] usbcore: registered new interface driver cdc_ether [ 2.764942] usbcore: registered new interface driver net1080 [ 2.770542] usbcore: registered new interface driver cdc_subset [ 2.776837] usbcore: registered new interface driver zaurus [ 2.782571] usbcore: registered new interface driver cdc_ncm [ 2.788217] usbcore: registered new interface driver aqc111 [ 2.793862] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.799928] ohci-pci: OHCI PCI platform driver [ 2.803975] ohci-platform: OHCI generic platform driver [ 2.809860] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.816348] usbcore: registered new interface driver uas [ 2.820538] usbcore: registered new interface driver usb-storage [ 2.826695] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.832714] mousedev: PS/2 mouse device common for all mice [ 2.837680] usbcore: registered new interface driver xpad [ 2.845482] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.848151] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.856217] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.862549] i2c /dev entries driver [ 2.865854] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.871554] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.877270] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.882593] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.887653] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.893443] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.898624] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.912620] device-mapper: uevent: version 1.0.3 [ 2.913098] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.919081] cpuidle: Initializing cpuidle driver [ 2.923262] sdhci: Secure Digital Host Controller Interface driver [ 2.928029] sdhci: Copyright(c) Pierre Ossman [ 2.931868] Synopsys Designware Multimedia Card Interface Driver [ 2.938067] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.944054] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.944943] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.957326] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.978063] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.987884] vdd-1v0: supplied by regulator-dummy [ 2.993436] vdd-1v8-hs: supplied by regulator-dummy [ 2.998259] vdd-1v8-ls: supplied by regulator-dummy [ 3.003083] vdd-1v8-ao: supplied by regulator-dummy [ 3.007022] vddio-ddr-1v1: supplied by regulator-dummy [ 3.011433] vdd-rtc: supplied by regulator-dummy [ 3.013282] spmic-ldo1: supplied by regulator-dummy [ 3.014486] vdd-ao-3v3: supplied by regulator-dummy [ 3.020606] vddio-emmc-3v3: supplied by regulator-dummy [ 3.026958] spmic-ldo4: supplied by regulator-dummy [ 3.028165] vdd-usb-3v3: supplied by regulator-dummy [ 3.034385] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.040682] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.046218] spmic-ldo8: supplied by vdd-1v8-ls [ 3.047741] gpio-510 (gpio_default): hogged as output/high [ 3.049129] gpio-511 (gpio_default): hogged as output/high [ 3.052019] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.190076] max77686-rtc max77620-rtc: registered as rtc0 [ 3.191199] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.191573] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.011712] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.012860] hid: raw HID events driver (C) Jiri Kosina [ 4.013887] usbcore: registered new interface driver usbhid [ 4.014040] usbhid: USB HID core driver [ 4.016150] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.017513] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.781245] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.855333] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.896 ms) ÿá[ 4.101643] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.102306] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.103388] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.104129] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.105870] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.106543] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.107186] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.108457] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.108817] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.111613] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.118234] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.124439] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.129901] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.135535] denver_knobs_init:MTS_VERSION:55637613 [ 4.148068] t19x_cache tegra-cache: probed [ 4.151017] optee: probing for conduit method. [ 4.151865] optee: revision 3.16 (65cc2218) [ 4.152906] optee: dynamic shared memory is enabled [ 4.156565] optee: initialized driver [ 4.163123] nvpmodel: initialized successfully [ 4.164104] tegra_hv: get_hvd: not initialized yet [ 4.168805] user_ivc_mempool: hypervisor not present [ 4.175365] usbcore: registered new interface driver snd-usb-audio [ 4.181609] u32 classifier [ 4.182497] input device check on [ 4.186381] Actions configured [ 4.190192] Initializing XFRM netlink socket [ 4.195553] NET: Registered protocol family 10 [ 4.201682] Segment Routing with IPv6 [ 4.202375] NET: Registered protocol family 17 [ 4.206450] NET: Registered protocol family 15 [ 4.211126] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.224190] Bluetooth: RFCOMM socket layer initialized [ 4.229305] Bluetooth: RFCOMM ver 1.11 [ 4.232953] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.239061] Bluetooth: HIDP socket layer initialized [ 4.244683] 9pnet: Installing 9P2000 support [ 4.248255] Key type dns_resolver registered [ 4.254149] registered taskstats version 1 [ 4.256643] Loading compiled-in X.509 certificates [ 4.269727] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.272561] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.282841] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.284601] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.293456] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.301567] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.417217] tegra194-pcie 14160000.pcie: Link up [ 4.420448] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.420646] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.420905] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.421429] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.421877] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.422475] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.423149] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.436041] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.436555] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.437117] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.438784] pci 0004:01:00.0: supports D1 D2 [ 4.439044] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.450131] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.450555] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.450839] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.451546] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.451960] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.452174] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.452376] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.459224] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.467986] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.478265] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.482850] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.488397] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.495628] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.504527] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.505999] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.514141] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.522961] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.638094] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.638843] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.639122] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.639273] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.639587] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.639782] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.640139] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.640535] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.655698] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.655991] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.658019] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.659207] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.660303] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.661822] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.662605] pci 0005:00:00.0: Removing from iommu group 7 [ 5.662974] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.692821] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.713619] host1x 13e10000.host1x: initialized [ 5.715038] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.715983] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.717109] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.717963] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.718967] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.719590] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.720602] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.721653] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.731157] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.738335] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.748122] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.755838] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.765539] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.772395] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.782211] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.789399] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.799536] falcon 15340000.vic: Adding to iommu group 17 [ 5.813403] falcon 15340000.vic: initialized [ 5.814511] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.819532] falcon 15380000.nvjpg: initialized [ 5.820305] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.833313] falcon 154c0000.nvenc: initialized [ 5.834031] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.842391] falcon 15a80000.nvenc1: initialized [ 5.843136] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.854848] nvdec 15480000.nvdec: initialized [ 5.855601] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.865085] nvdec 15140000.nvdec1: initialized [ 5.865918] tsec 15500000.tsec: Adding to iommu group 18 [ 5.871456] tsec 15500000.tsec: initialized [ 5.872046] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.879723] tsec 15100000.tsecb: initialized [ 5.883654] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.906843] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.918335] gpio-374 (wifi-enable): hogged as output/high [ 5.918670] gpio-431 (camera-control-output-low): hogged as output/low [ 5.918988] gpio-432 (camera-control-output-low): hogged as output/low [ 5.920496] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.922362] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.923777] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.930521] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.935679] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.941353] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.946802] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.955252] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.962884] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.974084] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.979533] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.985400] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.994031] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.003494] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.010687] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.018003] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.024595] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.033999] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.040448] pva 16000000.pva0: Adding to iommu group 22 [ 6.065688] pva 16000000.pva0: initialized [ 6.070468] pva 16800000.pva1: Adding to iommu group 23 [ 6.081304] pva 16800000.pva1: initialized [ 6.085462] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.097897] nvdla 15880000.nvdla0: initialized [ 6.099122] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.107281] nvdla 158c0000.nvdla1: initialized [ 6.110533] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.110870] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.111635] tegradc 15200000.display: Adding to iommu group 26 [ 6.111797] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.111813] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.112536] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.113269] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.118016] tegradccommon 15200000.display-hub: dma mapping done [ 6.120079] tegradc 15210000.display: Adding to iommu group 26 [ 6.124450] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.141613] tegra_cec 3960000.tegra_cec: probed [ 6.147309] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.154458] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.159142] kfuse 3830000.kfuse: initialized [ 6.163494] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.169566] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.176378] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.182933] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.192581] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.197540] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.206538] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.211887] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.231635] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.232003] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.235177] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.243587] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.252023] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.258823] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.266167] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.273360] usb usb1: Product: xHCI Host Controller [ 6.278541] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.284839] usb usb1: SerialNumber: 3610000.xhci [ 6.290487] hub 1-0:1.0: USB hub found [ 6.293241] hub 1-0:1.0: 4 ports detected [ 6.297887] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.302554] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.310418] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.318128] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.326013] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.333238] usb usb2: Product: xHCI Host Controller [ 6.338217] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.344428] usb usb2: SerialNumber: 3610000.xhci [ 6.350082] hub 2-0:1.0: USB hub found [ 6.352638] hub 2-0:1.0: 4 ports detected [ 6.393699] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.399477] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.400800] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.400990] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.414358] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.415392] tegra194-cpufreq ccplex: probed with BWMGR [ 6.416472] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.417285] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.417745] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.419161] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.428074] mmc0: CQHCI version 5.10 [ 6.429739] tegra194-vi5 15c10000.vi: initialized [ 6.432003] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.433328] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.436631] generic_infoframe_type: 0x87 [ 6.443008] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.446999] tegradc 15200000.display: DT parsed successfully [ 6.455089] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.460572] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.474884] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.481761] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.488293] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.495409] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.501242] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.502980] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.507565] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.509249] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.517757] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.532022] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.540260] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.545779] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.554102] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.559699] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.577272] nvethernet 2490000.ethernet: Macsec not supported [ 6.578470] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.581181] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.584415] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.584629] random: crng init done [ 6.590701] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.598667] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.607904] tegradc 15200000.display: probed [ 6.609380] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.626588] mmc0: Command Queue Engine enabled [ 6.633910] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.638403] mmc0: periodic cache flush enabled [ 6.649557] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.656402] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.656794] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.664063] tegra-se-nvhost 15810000.se: initialized [ 6.666899] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.676864] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.685520] Console: switching to colour frame buffer device 240x67 [ 6.685727] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.689943] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.691486] tegradc 15200000.display: fb registered [ 6.698570] tegra-se-nvhost 15820000.se: initialized [ 6.705959] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.712615] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.716663] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.722110] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.733137] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.740417] tegra-se-nvhost 15830000.se: initialized [ 6.751903] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.757020] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.762442] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.763514] tegra-se-nvhost 15840000.se: initialized [ 6.771087] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.771092] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.771099] usb 1-2: Manufacturer: Generic [ 6.777976] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.785528] hub 1-2:1.0: USB hub found [ 6.789509] tegra_actmon d230000.actmon: in actmon_register()... [ 6.793597] hub 1-2:1.0: 4 ports detected [ 6.798818] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.818362] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.818596] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.828052] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.835494] hvc_sysfs: hypervisor is not present [ 6.842643] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.874676] ALSA device list: [ 6.874782] No soundcards found. [ 6.875646] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.875825] Extcon AUX1(HDMI) enable [ 6.876207] tegradc 15210000.display: disp1 connected to head1->sor [ 6.878180] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.882083] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.885603] tegradc 15210000.display: DT parsed successfully [ 6.898893] tegradc 15210000.display: Display dc.000000008acbac1e registered with id=1 [ 6.907037] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.912997] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.925944] tegradc 15210000.display: probed [ 6.926292] tegradc 15210000.display: fb registered [ 6.927102] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.931855] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.936836] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.938378] Freeing unused kernel memory: 3968K [ 6.944075] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.951409] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.951417] usb 2-3: Manufacturer: Generic [ 6.955889] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.978242] tegradc 15210000.display: blank - powerdown [ 6.983300] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.985307] Run /init as init process [ 6.988925] hub 2-3:1.0: USB hub found [ 6.991095] hub 2-3:1.0: 4 ports detected [ 6.991394] Extcon DP: HPD disabled [ 6.991399] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.991410] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.998663] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.026149] tegradc 15200000.display: blank - powerdown [ 7.045195] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.068774] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.068778] Extcon AUX1(HDMI) disable [ 7.092228] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.093111] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.105286] tegradc 15200000.display: unblank [ 7.106560] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.106749] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.112876] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.114737] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.118752] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.118756] Extcon AUX1(HDMI) enable [ 7.131522] tegradc 15200000.display: sync windows ret = 247 [ 7.145239] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.158862] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.160553] Extcon HDMI: HPD enabled [ 7.162136] tegradc 15200000.display: hdmi: plugged [ 7.202390] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.204232] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.205885] usb 1-3: Product: Bluetooth Radio [ 7.207420] usb 1-3: Manufacturer: Realtek [ 7.208915] usb 1-3: SerialNumber: 00e04c000001 [ 7.209701] Root device found: mmcblk0p1 [ 7.211382] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.213851] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.214129] Found dev node: /dev/mmcblk0p1 [ 7.251976] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.257676] Rootfs mounted over mmcblk0p1 [ 7.302446] Switching from initrd to actual rootfs [ 7.473586] systemd[1]: System time before build time, advancing clock. [ 7.546787] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.551835] systemd[1]: Detected architecture arm64. [ 7.601097] systemd[1]: Set hostname to . [ 7.772319] systemd-sysv-generator[261]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.138967] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.140739] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.146817] systemd[1]: Created slice system-modprobe.slice. [ 8.151503] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.155892] systemd[1]: Created slice User and Session Slice. [ 8.159431] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.163754] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.167171] systemd[1]: Reached target User and Group Name Lookups. [ 8.170471] systemd[1]: Reached target Slices. [ 8.173628] systemd[1]: Reached target Swap. [ 8.177724] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.181587] systemd[1]: Listening on Syslog Socket. [ 8.185207] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.188695] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.193025] systemd[1]: Listening on Journal Audit Socket. [ 8.196776] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.200647] systemd[1]: Listening on Journal Socket. [ 8.204507] systemd[1]: Listening on udev Control Socket. [ 8.208075] systemd[1]: Listening on udev Kernel Socket. [ 8.216699] systemd[1]: Mounting Huge Pages File System... [ 8.224968] systemd[1]: Mounting POSIX Message Queue File System... [ 8.234407] systemd[1]: Mounting RPC Pipe File System... [ 8.244107] systemd[1]: Mounting Kernel Debug File System... [ 8.252742] systemd[1]: Mounting Kernel Trace File System... [ 8.264198] systemd[1]: Starting Journal Service... [ 8.273477] systemd[1]: Starting Set the console keyboard layout... [ 8.281652] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.285080] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.291788] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.299739] systemd[1]: Started Nameserver information manager. [ 8.305429] systemd[1]: Reached target Network (Pre). [ 8.312846] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.314812] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.323330] systemd[1]: Starting Load Kernel Modules... [ 8.331135] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.339660] systemd[1]: Starting udev Coldplug all Devices... [ 8.351709] systemd[1]: Mounted Huge Pages File System. [ 8.355533] systemd[1]: Mounted POSIX Message Queue File System. [ 8.359046] systemd[1]: Mounted RPC Pipe File System. [ 8.360272] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.365108] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.367338] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.367481] systemd[1]: Mounted Kernel Debug File System. [ 8.368804] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.371674] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.373037] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.373301] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.374692] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.377736] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.377747] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.382550] systemd[1]: Mounted Kernel Trace File System. [ 8.390089] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.394769] systemd[1]: nvfb-udev.service: Succeeded. [ 8.398899] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.410808] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.415800] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.417573] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.432921] systemd[1]: Starting Load/Save Random Seed... [ 8.441711] systemd[1]: Starting Create System Users... [ 8.474819] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.474819] [ 8.489088] systemd[1]: Finished Load/Save Random Seed. [ 8.503634] systemd[1]: Finished Create System Users. [ 8.510638] systemd[1]: Finished Load Kernel Modules. [ 8.515111] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.522375] systemd[1]: Mounting Kernel Configuration File System... [ 8.531337] systemd[1]: Started OP-TEE Client Supplicant. [ 8.539895] systemd[1]: Starting Apply Kernel Variables... [ 8.548509] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.560127] systemd[1]: Finished Set the console keyboard layout. [ 8.564315] systemd[1]: Mounted Kernel Configuration File System. [ 9.906066] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.912612] imx219 9-0010: board setup failed [ 9.914087] imx219: probe of 9-0010 failed with error -121 [ 9.927134] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.934625] imx219 10-0010: board setup failed [ 9.936088] imx219: probe of 10-0010 failed with error -121 [ 10.056923] hot-surface-alert cooling state: 0 -> 1 [ 10.880945] using random self ethernet address [ 10.890836] using random host ethernet address [ 11.452349] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.452355] Creating 1 MTD partitions on "spi6.0": [ 11.452364] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.183215] using random self ethernet address [ 12.184864] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.839529] nvidia: loading out-of-tree module taints kernel. [ 59.363129] watchdog: watchdog0: watchdog did not stop! [ 59.815388] Trying to unregister non-registered hwtime source [ 62.872702] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.874271] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, côÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.480] I> register 'maxim' power off handle [0003.483] I> virtual i2c enabled [0003.483] I> registered 'maxim,max20024' pmic [0003.483] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.607] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.621] E> invalid display type [0003.622] E> cannot find any other nvdisp nodes [0003.639] I> edid read success [0003.651] I> edid read success [0003.652] I> width = 640, height = 480, frequency = 25174825 [0003.652] I> width = 1920, height = 1080, frequency = 148500000 [0003.652] I> width = 1280, height = 768, frequency = 79500000 [0003.653] I> width = 1360, height = 768, frequency = 85500000 [0003.653] I> width = 720, height = 480, frequency = 26973026 [0003.657] I> width = 720, height = 576, frequency = 26973026 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 720, height = 480, frequency = 26973026 [0003.691] I> width = 720, height = 576, frequency = 26973026 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 4096, height = 2160, frequency = 296703296 [0003.725] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.737] I> hdmi_enable, starting HDMI initialisation [0003.742] I> hdmi_enable, HDMI initialisation complete [0003.751] initializing target [0003.751] calling apps_init() [0003.752] starting app kernel_boot_app [0003.753] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932988K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475328K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000666] Console: colour dummy device 80x25 [ 0.002126] printk: console [tty0] enabled [ 0.002201] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002238] pid_max: default: 32768 minimum: 301 [ 0.002442] LSM: Security Framework initializing [ 0.002505] Yama: becoming mindful. [ 0.002552] SELinux: Initializing. [ 0.002748] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002788] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005989] rcu: Hierarchical SRCU implementation. [ 0.006312] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007038] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007088] DTB Build time: Aug 10 2022 20:31:49 [ 0.009788] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010064] Remapping and enabling EFI services. [ 0.012200] smp: Bringing up secondary CPUs ... [ 0.043427] Detected PIPT I-cache on CPU1 [ 0.043542] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.077539] Detected PIPT I-cache on CPU2 [ 0.077686] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.107295] Detected PIPT I-cache on CPU3 [ 0.107544] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.137377] Detected PIPT I-cache on CPU4 [ 0.137539] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.167291] Detected PIPT I-cache on CPU5 [ 0.167372] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.167879] smp: Brought up 1 node, 6 CPUs [ 0.168114] SMP: Total of 6 processors activated. [ 0.168220] CPU features: detected: Privileged Access Never [ 0.168262] CPU features: detected: LSE atomic instructions [ 0.168276] CPU features: detected: User Access Override [ 0.168290] CPU features: detected: 32-bit EL0 Support [ 0.168303] CPU features: detected: RAS Extension Support [ 0.168317] CPU features: detected: CRC32 instructions [ 0.168330] CPU features: detected: 32-bit EL1 Support [ 0.238817] CPU: All CPU(s) started at EL2 [ 0.243950] devtmpfs: initialized [ 0.292257] Registered cp15_barrier emulation handler [ 0.292401] Registered setend emulation handler [ 0.292421] KASLR enabled [ 0.292734] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.292758] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.294078] pinctrl core: initialized pinctrl subsystem [ 0.295109] SMBIOS 3.0.0 present. [ 0.295139] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.295789] NET: Registered protocol family 16 [ 0.297833] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.298343] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.299032] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.299093] audit: initializing netlink subsys (disabled) [ 0.299433] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.299882] thermal_sys: Registered thermal governor 'step_wise' [ 0.299889] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299905] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.302202] cpuidle: using governor menu [ 0.302536] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.302990] ASID allocator initialised with 32768 entries [ 0.303237] Serial: AMBA PL011 UART driver [ 0.306460] Tegra reboot handler registered. [ 0.376260] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.376404] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.376584] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376629] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376752] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376818] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376959] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.377000] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.377120] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.377161] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379374] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379407] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.379434] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379459] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379491] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379516] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379553] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379581] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379610] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379634] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379656] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379679] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379724] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379746] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379768] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379790] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379812] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.379895] mc-err: mcerr ops are set to t19x [ 0.393167] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.393190] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.393202] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.393214] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399675] ACPI: Interpreter disabled. [ 0.400890] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.402226] iommu: Default domain type: Translated [ 0.402291] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.402672] SCSI subsystem initialized [ 0.402852] usbcore: registered new interface driver usbfs [ 0.402896] usbcore: registered new interface driver hub [ 0.402961] usbcore: registered new device driver usb [ 0.403421] mc: Linux media interface: v0.10 [ 0.403468] videodev: Linux video capture interface: v2.00 [ 0.403926] pps_core: LinuxPPS API ver. 1 registered [ 0.403939] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403963] PTP clock support registered [ 0.404238] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404543] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.404628] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.405301] Registered efivars operations [ 0.410776] FPGA manager framework [ 0.410890] Advanced Linux Sound Architecture Driver Initialized. [ 0.411478] Bluetooth: Core ver 2.22 [ 0.411518] NET: Registered protocol family 31 [ 0.411529] Bluetooth: HCI device and connection manager initialized [ 0.411544] Bluetooth: HCI socket layer initialized [ 0.411559] Bluetooth: L2CAP socket layer initialized [ 0.411579] Bluetooth: SCO socket layer initialized [ 0.413109] camchar: rtcpu character device driver loaded [ 0.413833] clocksource: Switched to clocksource arch_sys_counter [ 0.782127] VFS: Disk quotas dquot_6.6.0 [ 0.782197] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.782581] pnp: PnP ACPI: disabled [ 0.795485] la/ptsa driver initialized. [ 0.795605] NET: Registered protocol family 2 [ 0.795783] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.801076] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.801144] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.801447] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.802064] TCP: Hash tables configured (established 65536 bind 65536) [ 0.802320] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.802462] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.802794] NET: Registered protocol family 1 [ 0.803523] RPC: Registered named UNIX socket transport module. [ 0.803573] RPC: Registered udp transport module. [ 0.803587] RPC: Registered tcp transport module. [ 0.803600] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.803626] PCI: CLS 0 bytes, default 64 [ 0.803932] Trying to unpack rootfs image as initramfs... [ 1.072220] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.075618] Freeing initrd memory: 8196K [ 1.080610] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.080645] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.080694] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.081158] kvm [1]: IPA Size Limit: 40 bits [ 1.081736] kvm [1]: vgic interrupt IRQ9 [ 1.082385] kvm [1]: VHE mode initialized successfully [ 1.084162] Initialise system trusted keyrings [ 1.084559] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.091770] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.092734] NFS: Registering the id_resolver key type [ 1.092775] Key type id_resolver registered [ 1.092817] Key type id_legacy registered [ 1.092920] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.092944] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.092985] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.103726] NET: Registered protocol family 38 [ 1.103749] Key type asymmetric registered [ 1.103764] Asymmetric key parser 'x509' registered [ 1.103816] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.104095] io scheduler mq-deadline registered [ 1.104112] io scheduler kyber registered [ 1.111303] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.114743] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.114847] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.114951] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.115025] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.115094] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.121901] scrncapt: init (heads:4 wins:6 planes:4) [ 1.122326] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.123346] EINJ: ACPI disabled. [ 1.127569] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.127596] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.127611] tegra-pmc: ### PMC reset level: L1 [ 1.127626] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.127706] tegra-pmc: PMC Prod config success [ 1.133198] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.158373] random: fast init done [ 1.161533] printk: console [ttyTCU0] enabled [ 2.691740] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.695549] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.700078] arm-smmu 10000000.iommu: stage 1 translation [ 2.705567] arm-smmu 10000000.iommu: stage 2 translation [ 2.711076] arm-smmu 10000000.iommu: nested translation [ 2.716435] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.723369] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.735654] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.736696] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.743283] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.751091] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.756325] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.760786] arm-smmu 12000000.iommu: stage 1 translation [ 2.766305] arm-smmu 12000000.iommu: stage 2 translation [ 2.771979] arm-smmu 12000000.iommu: nested translation [ 2.777151] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.784344] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.796432] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.797428] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.804282] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.811864] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.821638] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.824759] tegra_profiler: auth: init [ 2.828703] THERMAL EST: found 3 subdevs [ 2.832364] THERMAL EST num_resources: 0 [ 2.835949] [THERMAL EST subdev 0] [ 2.839556] [THERMAL EST subdev 1] [ 2.842686] [THERMAL EST subdev 2] [ 2.846188] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.852675] THERMAL EST: thz register success. [ 2.856635] THERMAL EST: end of probe, return err: 0 [ 2.862024] nvsciipc: loaded module [ 2.869453] tun: Universal TUN/TAP device driver, 1.6 [ 2.871859] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.877705] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.883567] e1000e: Intel(R) PRO/1000 Network Driver [ 2.888219] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.894513] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.899585] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.905861] PPP generic driver version 2.4.2 [ 2.910303] PPP BSD Compression module registered [ 2.914793] PPP Deflate Compression module registered [ 2.919781] PPP MPPE Compression module registered [ 2.925050] usbcore: registered new interface driver r8152 [ 2.930309] usbcore: registered new interface driver asix [ 2.935907] usbcore: registered new interface driver ax88179_178a [ 2.942016] usbcore: registered new interface driver cdc_ether [ 2.947715] usbcore: registered new interface driver net1080 [ 2.953590] usbcore: registered new interface driver cdc_subset [ 2.959627] usbcore: registered new interface driver zaurus [ 2.965305] usbcore: registered new interface driver cdc_ncm [ 2.970749] usbcore: registered new interface driver aqc111 [ 2.976392] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.982504] ohci-pci: OHCI PCI platform driver [ 2.986741] ohci-platform: OHCI generic platform driver [ 2.992921] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.998991] usbcore: registered new interface driver uas [ 3.003067] usbcore: registered new interface driver usb-storage [ 3.009227] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.015520] mousedev: PS/2 mouse device common for all mice [ 3.020197] usbcore: registered new interface driver xpad [ 3.028300] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.030958] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.038745] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.045285] i2c /dev entries driver [ 3.048733] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.054920] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.060024] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.065432] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.070505] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.075982] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.081689] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.095680] device-mapper: uevent: version 1.0.3 [ 3.096155] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.101646] cpuidle: Initializing cpuidle driver [ 3.105645] sdhci: Secure Digital Host Controller Interface driver [ 3.110817] sdhci: Copyright(c) Pierre Ossman [ 3.114661] Synopsys Designware Multimedia Card Interface Driver [ 3.120846] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.127036] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.127665] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.140142] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.158734] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.167726] vdd-1v0: supplied by regulator-dummy [ 3.173132] vdd-1v8-hs: supplied by regulator-dummy [ 3.177904] vdd-1v8-ls: supplied by regulator-dummy [ 3.182589] vdd-1v8-ao: supplied by regulator-dummy [ 3.186688] vddio-ddr-1v1: supplied by regulator-dummy [ 3.191107] vdd-rtc: supplied by regulator-dummy [ 3.192749] spmic-ldo1: supplied by regulator-dummy [ 3.193946] vdd-ao-3v3: supplied by regulator-dummy [ 3.199997] vddio-emmc-3v3: supplied by regulator-dummy [ 3.206248] spmic-ldo4: supplied by regulator-dummy [ 3.207402] vdd-usb-3v3: supplied by regulator-dummy [ 3.213473] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.219579] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.224981] spmic-ldo8: supplied by vdd-1v8-ls [ 3.226344] gpio-510 (gpio_default): hogged as output/high [ 3.227649] gpio-511 (gpio_default): hogged as output/high [ 3.233879] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.372574] max77686-rtc max77620-rtc: registered as rtc0 [ 3.373958] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.374274] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.079875] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.080960] hid: raw HID events driver (C) Jiri Kosina [ 4.081657] usbcore: registered new interface driver usbhid [ 4.081799] usbhid: USB HID core driver [ 4.083544] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.084716] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.137855] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.213111] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.065 ms) ÿá[ 4.169768] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.170683] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.171982] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.172956] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.175138] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.175951] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.176648] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.178284] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.178675] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.180764] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.186319] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.192327] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.197558] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.204787] denver_knobs_init:MTS_VERSION:55637613 [ 4.217822] t19x_cache tegra-cache: probed [ 4.222285] optee: probing for conduit method. [ 4.223143] optee: revision 3.16 (65cc2218) [ 4.224336] optee: dynamic shared memory is enabled [ 4.225634] optee: initialized driver [ 4.231991] nvpmodel: initialized successfully [ 4.232507] tegra_hv: get_hvd: not initialized yet [ 4.237285] user_ivc_mempool: hypervisor not present [ 4.243133] usbcore: registered new interface driver snd-usb-audio [ 4.249916] u32 classifier [ 4.250950] input device check on [ 4.254677] Actions configured [ 4.258188] Initializing XFRM netlink socket [ 4.263022] NET: Registered protocol family 10 [ 4.270347] Segment Routing with IPv6 [ 4.270711] NET: Registered protocol family 17 [ 4.274712] NET: Registered protocol family 15 [ 4.279356] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.292546] Bluetooth: RFCOMM socket layer initialized [ 4.297370] Bluetooth: RFCOMM ver 1.11 [ 4.301434] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.307127] Bluetooth: HIDP socket layer initialized [ 4.313234] 9pnet: Installing 9P2000 support [ 4.316466] Key type dns_resolver registered [ 4.322203] registered taskstats version 1 [ 4.324876] Loading compiled-in X.509 certificates [ 4.337984] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.340972] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.351237] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.353044] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.361547] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.370013] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.485926] tegra194-pcie 14160000.pcie: Link up [ 4.488677] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.488906] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.489184] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.489431] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.489620] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.490060] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.490542] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.504453] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.505006] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.505551] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.507267] pci 0004:01:00.0: supports D1 D2 [ 4.507487] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.515970] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.516386] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.516684] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.517186] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.517441] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.517620] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.520960] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.528129] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.536655] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.546982] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.551315] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.557327] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.564638] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.572688] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.574746] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.583111] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.591884] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.694003] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.694640] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.694907] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.695057] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.695299] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.695552] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.695911] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.696350] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.712307] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.712662] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.715220] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.716904] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.718635] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.720289] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.721230] pci 0005:00:00.0: Removing from iommu group 7 [ 5.721502] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.752969] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.774452] host1x 13e10000.host1x: initialized [ 5.775983] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.776960] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.778370] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.779020] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.780154] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.780768] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.781792] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.782683] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.787285] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.794172] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.803963] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.811110] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.821000] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.827797] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.838066] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.844860] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.854983] falcon 15340000.vic: Adding to iommu group 17 [ 5.869759] falcon 15340000.vic: initialized [ 5.870968] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.876783] falcon 15380000.nvjpg: initialized [ 5.877416] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.888347] falcon 154c0000.nvenc: initialized [ 5.889167] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.898044] falcon 15a80000.nvenc1: initialized [ 5.898663] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.909649] nvdec 15480000.nvdec: initialized [ 5.910293] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.919585] nvdec 15140000.nvdec1: initialized [ 5.920077] tsec 15500000.tsec: Adding to iommu group 18 [ 5.925351] tsec 15500000.tsec: initialized [ 5.925960] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.934864] tsec 15100000.tsecb: initialized [ 5.939131] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.963473] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.974902] gpio-374 (wifi-enable): hogged as output/high [ 5.975196] gpio-431 (camera-control-output-low): hogged as output/low [ 5.975458] gpio-432 (camera-control-output-low): hogged as output/low [ 5.977330] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.979212] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.979802] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.986620] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.991735] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.997238] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.002764] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.010884] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.018668] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.030138] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.035129] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.041012] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.049880] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.059429] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.066346] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.074347] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.080301] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.089869] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.096066] pva 16000000.pva0: Adding to iommu group 22 [ 6.122086] pva 16000000.pva0: initialized [ 6.127554] pva 16800000.pva1: Adding to iommu group 23 [ 6.138706] pva 16800000.pva1: initialized [ 6.143973] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.157043] nvdla 15880000.nvdla0: initialized [ 6.158857] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.167153] nvdla 158c0000.nvdla1: initialized [ 6.170027] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.170327] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.170513] tegradc 15200000.display: Adding to iommu group 26 [ 6.170996] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.172179] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.174298] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.174503] tegra_cec 3960000.tegra_cec: probed [ 6.176018] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.176990] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.178671] tegradc 15210000.display: Adding to iommu group 26 [ 6.183426] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.191015] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.194903] tegradccommon 15200000.display-hub: dma mapping done [ 6.202119] kfuse 3830000.kfuse: initialized [ 6.219371] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.225375] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.232629] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.238710] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.247744] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.253124] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.262034] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.267874] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.288457] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.288804] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.291036] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.299126] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.308078] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.314271] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.321997] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.329145] usb usb1: Product: xHCI Host Controller [ 6.334396] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.340454] usb usb1: SerialNumber: 3610000.xhci [ 6.346043] hub 1-0:1.0: USB hub found [ 6.349243] hub 1-0:1.0: 4 ports detected [ 6.353932] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.358675] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.366006] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.374018] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.381854] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.388820] usb usb2: Product: xHCI Host Controller [ 6.394067] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.400276] usb usb2: SerialNumber: 3610000.xhci [ 6.405723] hub 2-0:1.0: USB hub found [ 6.408607] hub 2-0:1.0: 4 ports detected [ 6.450146] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.455961] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.457157] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.457351] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.470508] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.471583] tegra194-cpufreq ccplex: probed with BWMGR [ 6.472847] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.473513] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.474111] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.475449] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.483373] tegra194-vi5 15c10000.vi: initialized [ 6.485216] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.486435] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.488855] generic_infoframe_type: 0x87 [ 6.495241] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.498914] tegradc 15200000.display: DT parsed successfully [ 6.499191] mmc0: CQHCI version 5.10 [ 6.507032] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.512628] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.516457] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.523993] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.528112] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.530652] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.530659] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.537994] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.545962] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.545966] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.546295] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.553980] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.559965] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.566351] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.573361] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.582649] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.590254] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.601868] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.603953] tegradc 15200000.display: probed [ 6.608093] nvethernet 2490000.ethernet: Macsec not supported [ 6.610458] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.615036] mmc0: Command Queue Engine enabled [ 6.626057] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.627568] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.633593] mmc0: periodic cache flush enabled [ 6.641209] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.648411] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.652948] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.659589] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.668187] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.671459] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.679506] tegra-se-nvhost 15810000.se: initialized [ 6.694671] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.700182] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.746221] Console: switching to colour frame buffer device 240x67 [ 6.746397] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.752126] tegradc 15200000.display: fb registered [ 6.752226] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.759218] tegra-se-nvhost 15820000.se: initialized [ 6.764342] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.770480] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.773918] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.780177] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.798983] tegra-se-nvhost 15830000.se: initialized [ 6.803967] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.809787] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.816016] tegra-se-nvhost 15840000.se: initialized [ 6.822014] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.828087] tegra_actmon d230000.actmon: in actmon_register()... [ 6.832533] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.838581] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.846916] hvc_sysfs: hypervisor is not present [ 6.852019] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.866928] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.867683] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.875314] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.879046] ALSA device list: [ 6.879602] usb 1-2: Manufacturer: Generic [ 6.880259] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.880270] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.881065] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.881068] Extcon AUX1(HDMI) enable [ 6.882602] No soundcards found. [ 6.882854] tegradc 15210000.display: disp1 connected to head1->sor [ 6.882901] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.882976] tegradc 15210000.display: DT parsed successfully [ 6.883011] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.883127] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.883134] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.888843] hub 1-2:1.0: USB hub found [ 6.889566] tegradc 15210000.display: probed [ 6.964328] tegradc 15210000.display: fb registered [ 6.965503] hub 1-2:1.0: 4 ports detected [ 6.967736] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.967741] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.967748] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.982750] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.001927] tegradc 15210000.display: blank - powerdown [ 7.006756] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.006759] Extcon DP: HPD disabled [ 7.006764] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.006778] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.016076] Freeing unused kernel memory: 3968K [ 7.018463] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.042841] tegradc 15200000.display: blank - powerdown [ 7.042950] Run /init as init process [ 7.043461] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.043470] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.043476] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.043482] usb 2-3: Manufacturer: Generic [ 7.054065] hub 2-3:1.0: USB hub found [ 7.055886] hub 2-3:1.0: 4 ports detected [ 7.085739] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.085744] Extcon AUX1(HDMI) disable [ 7.109003] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.109868] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.123586] tegradc 15200000.display: unblank [ 7.124861] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.125054] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.131089] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.132950] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.137014] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.137017] Extcon AUX1(HDMI) enable [ 7.149726] tegradc 15200000.display: sync windows ret = 247 [ 7.161875] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.182814] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.186486] Extcon HDMI: HPD enabled [ 7.190128] tegradc 15200000.display: hdmi: plugged [ 7.201907] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.234495] Root device found: mmcblk0p1 [ 7.237800] Found dev node: /dev/mmcblk0p1 [ 7.266439] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.267799] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.274812] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.280206] Rootfs mounted over mmcblk0p1 [ 7.316924] Switching from initrd to actual rootfs [ 7.335041] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.336369] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.337623] usb 1-3: Product: Bluetooth Radio [ 7.338835] usb 1-3: Manufacturer: Realtek [ 7.340035] usb 1-3: SerialNumber: 00e04c000001 [ 7.469520] systemd[1]: System time before build time, advancing clock. [ 7.540364] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.545329] systemd[1]: Detected architecture arm64. [ 7.584884] systemd[1]: Set hostname to . [ 7.753269] systemd-sysv-generator[243]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.106017] random: systemd: uninitialized urandom read (16 bytes read) [ 8.107757] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.109321] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.114946] systemd[1]: Created slice system-modprobe.slice. [ 8.118538] random: systemd: uninitialized urandom read (16 bytes read) [ 8.121074] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.124151] random: systemd: uninitialized urandom read (16 bytes read) [ 8.126809] systemd[1]: Created slice User and Session Slice. [ 8.130187] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.134289] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.137683] systemd[1]: Reached target User and Group Name Lookups. [ 8.140912] systemd[1]: Reached target Slices. [ 8.144049] systemd[1]: Reached target Swap. [ 8.148047] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.151589] systemd[1]: Listening on Syslog Socket. [ 8.155148] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.158478] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.162675] systemd[1]: Listening on Journal Audit Socket. [ 8.166256] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.170116] systemd[1]: Listening on Journal Socket. [ 8.173767] systemd[1]: Listening on udev Control Socket. [ 8.177256] systemd[1]: Listening on udev Kernel Socket. [ 8.185476] systemd[1]: Mounting Huge Pages File System... [ 8.193718] systemd[1]: Mounting POSIX Message Queue File System... [ 8.201696] systemd[1]: Mounting RPC Pipe File System... [ 8.203279] random: crng init done [ 8.204784] random: 7 urandom warning(s) missed due to ratelimiting [ 8.212946] systemd[1]: Mounting Kernel Debug File System... [ 8.221354] systemd[1]: Mounting Kernel Trace File System... [ 8.231260] systemd[1]: Starting Journal Service... [ 8.239993] systemd[1]: Starting Set the console keyboard layout... [ 8.248311] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.252016] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.258339] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.265796] systemd[1]: Started Nameserver information manager. [ 8.270450] systemd[1]: Reached target Network (Pre). [ 8.276980] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.278892] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.286677] systemd[1]: Starting Load Kernel Modules... [ 8.294482] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.302561] systemd[1]: Starting udev Coldplug all Devices... [ 8.312265] systemd[1]: Mounted Huge Pages File System. [ 8.317117] systemd[1]: Mounted POSIX Message Queue File System. [ 8.321016] systemd[1]: Mounted RPC Pipe File System. [ 8.324657] systemd[1]: Mounted Kernel Debug File System. [ 8.327240] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.329079] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.329085] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.329094] nvmap_page_pool_init: Total RAM pages: 1752672 [ 8.329098] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.330832] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.331300] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.332361] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.357597] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.360597] systemd[1]: Mounted Kernel Trace File System. [ 8.364847] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.383358] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.389403] systemd[1]: nvfb-udev.service: Succeeded. [ 8.395341] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.405509] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.418438] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.420238] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.427064] systemd[1]: Starting Load/Save Random Seed... [ 8.436927] systemd[1]: Starting Create System Users... [ 8.465372] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.465372] [ 8.492575] systemd[1]: Finished Load/Save Random Seed. [ 8.499142] systemd[1]: Finished Set the console keyboard layout. [ 8.505405] systemd[1]: Finished Load Kernel Modules. [ 8.510448] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.516602] systemd[1]: Mounting Kernel Configuration File System... [ 8.524631] systemd[1]: Started OP-TEE Client Supplicant. [ 8.533378] systemd[1]: Starting Apply Kernel Variables... [ 8.543162] systemd[1]: Mounted Kernel Configuration File System. [ 8.554911] systemd[1]: Finished Create System Users. [ 8.563071] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.966496] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.972919] imx219 9-0010: board setup failed [ 9.974346] imx219: probe of 9-0010 failed with error -121 [ 9.991590] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.996897] imx219 10-0010: board setup failed [ 9.997034] imx219: probe of 10-0010 failed with error -121 [ 10.015514] hot-surface-alert cooling state: 0 -> 1 [ 10.496056] using random self ethernet address [ 10.497265] using random host ethernet address [ 11.529107] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.529113] Creating 1 MTD partitions on "spi6.0": [ 11.529122] 0x000000000000-0x000002000000 : "Whole_flash0" [ 11.994726] using random self ethernet address [ 11.996300] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.833696] nvidia: loading out-of-tree module taints kernel. [ 58.787491] watchdog: watchdog0: watchdog did not stop! [ 59.234834] Trying to unregister non-registered hwtime source [ 62.292416] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.293887] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäalÿâadc initialized ÿä ÿâfmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> hdmi cable connected [0003.610] W> set volts not configured for 'vdd-1v0' [0003.616] W> set volts not configured for 'vdd-1v8-hs' [0003.616] I> retrieved tmds range from prod_list_hdmi_soc [0003.623] E> invalid display type [0003.625] E> cannot find any other nvdisp nodes [0003.641] I> edid read success [0003.654] I> edid read success [0003.654] I> width = 640, height = 480, frequency = 25174825 [0003.654] I> width = 1920, height = 1080, frequency = 148500000 [0003.655] I> width = 1280, height = 768, frequency = 79500000 [0003.655] I> width = 1360, height = 768, frequency = 85500000 [0003.655] I> width = 720, height = 480, frequency = 26973026 [0003.659] I> width = 720, height = 576, frequency = 26973026 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1280, height = 720, frequency = 74175824 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 1920, height = 1080, frequency = 148351648 [0003.688] I> width = 720, height = 480, frequency = 26973026 [0003.693] I> width = 720, height = 576, frequency = 26973026 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 3840, height = 2160, frequency = 296703296 [0003.722] I> width = 4096, height = 2160, frequency = 296703296 [0003.728] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.739] I> hdmi_enable, starting HDMI initialisation [0003.744] I> hdmi_enable, HDMI initialisation complete [0003.753] initializing target [0003.754] calling apps_init() [0003.755] starting app kernel_boot_app [0003.755] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000663] Console: colour dummy device 80x25 [ 0.002197] printk: console [tty0] enabled [ 0.002279] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002335] pid_max: default: 32768 minimum: 301 [ 0.002545] LSM: Security Framework initializing [ 0.002622] Yama: becoming mindful. [ 0.002684] SELinux: Initializing. [ 0.002854] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002899] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005971] rcu: Hierarchical SRCU implementation. [ 0.006201] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006876] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006953] DTB Build time: Aug 10 2022 20:31:49 [ 0.009654] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009903] Remapping and enabling EFI services. [ 0.011843] smp: Bringing up secondary CPUs ... [ 0.041431] Detected PIPT I-cache on CPU1 [ 0.041551] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072604] Detected PIPT I-cache on CPU2 [ 0.072750] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102242] Detected PIPT I-cache on CPU3 [ 0.102369] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132037] Detected PIPT I-cache on CPU4 [ 0.132217] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161939] Detected PIPT I-cache on CPU5 [ 0.162041] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162378] smp: Brought up 1 node, 6 CPUs [ 0.162625] SMP: Total of 6 processors activated. [ 0.162717] CPU features: detected: Privileged Access Never [ 0.162744] CPU features: detected: LSE atomic instructions [ 0.162758] CPU features: detected: User Access Override [ 0.162772] CPU features: detected: 32-bit EL0 Support [ 0.162786] CPU features: detected: RAS Extension Support [ 0.162800] CPU features: detected: CRC32 instructions [ 0.162814] CPU features: detected: 32-bit EL1 Support [ 0.230808] CPU: All CPU(s) started at EL2 [ 0.236214] devtmpfs: initialized [ 0.286577] Registered cp15_barrier emulation handler [ 0.286685] Registered setend emulation handler [ 0.286705] KASLR enabled [ 0.286983] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287009] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288276] pinctrl core: initialized pinctrl subsystem [ 0.289261] SMBIOS 3.0.0 present. [ 0.289323] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289962] NET: Registered protocol family 16 [ 0.292060] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292552] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293245] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.293368] audit: initializing netlink subsys (disabled) [ 0.293659] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.294097] thermal_sys: Registered thermal governor 'step_wise' [ 0.294104] thermal_sys: Registered thermal governor 'power_allocator' [ 0.294119] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.296455] cpuidle: using governor menu [ 0.297014] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297442] ASID allocator initialised with 32768 entries [ 0.297718] Serial: AMBA PL011 UART driver [ 0.301054] Tegra reboot handler registered. [ 0.375835] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375947] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.376153] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376195] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376374] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376428] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376545] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.376583] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376707] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376742] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379151] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379182] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.379207] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379251] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379277] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379316] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379339] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379365] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379387] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379410] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379432] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379458] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379481] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379503] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379526] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379548] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379570] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.379656] mc-err: mcerr ops are set to t19x [ 0.392334] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392376] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.392389] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392401] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399058] ACPI: Interpreter disabled. [ 0.400252] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.401549] iommu: Default domain type: Translated [ 0.401615] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.401980] SCSI subsystem initialized [ 0.402150] usbcore: registered new interface driver usbfs [ 0.402235] usbcore: registered new interface driver hub [ 0.402273] usbcore: registered new device driver usb [ 0.402689] mc: Linux media interface: v0.10 [ 0.402720] videodev: Linux video capture interface: v2.00 [ 0.403034] pps_core: LinuxPPS API ver. 1 registered [ 0.403045] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.403072] PTP clock support registered [ 0.403295] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.403599] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.403681] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.404276] Registered efivars operations [ 0.409533] FPGA manager framework [ 0.409650] Advanced Linux Sound Architecture Driver Initialized. [ 0.410274] Bluetooth: Core ver 2.22 [ 0.410315] NET: Registered protocol family 31 [ 0.410325] Bluetooth: HCI device and connection manager initialized [ 0.410340] Bluetooth: HCI socket layer initialized [ 0.410356] Bluetooth: L2CAP socket layer initialized [ 0.410376] Bluetooth: SCO socket layer initialized [ 0.411956] camchar: rtcpu character device driver loaded [ 0.412721] clocksource: Switched to clocksource arch_sys_counter [ 0.750909] VFS: Disk quotas dquot_6.6.0 [ 0.750979] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.751312] pnp: PnP ACPI: disabled [ 0.761611] la/ptsa driver initialized. [ 0.761735] NET: Registered protocol family 2 [ 0.761895] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.766783] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.766882] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.767180] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.767610] TCP: Hash tables configured (established 65536 bind 65536) [ 0.767735] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.767829] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.768031] NET: Registered protocol family 1 [ 0.768936] RPC: Registered named UNIX socket transport module. [ 0.768969] RPC: Registered udp transport module. [ 0.768986] RPC: Registered tcp transport module. [ 0.769002] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.769028] PCI: CLS 0 bytes, default 64 [ 0.769345] Trying to unpack rootfs image as initramfs... [ 1.041773] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.045131] Freeing initrd memory: 8196K [ 1.049737] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.049801] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.049849] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.050266] kvm [1]: IPA Size Limit: 40 bits [ 1.050878] kvm [1]: vgic interrupt IRQ9 [ 1.051473] kvm [1]: VHE mode initialized successfully [ 1.053199] Initialise system trusted keyrings [ 1.053542] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.060847] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.061871] NFS: Registering the id_resolver key type [ 1.061913] Key type id_resolver registered [ 1.061930] Key type id_legacy registered [ 1.062020] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.062047] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.062090] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.072083] NET: Registered protocol family 38 [ 1.072114] Key type asymmetric registered [ 1.072132] Asymmetric key parser 'x509' registered [ 1.072190] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.072528] io scheduler mq-deadline registered [ 1.072549] io scheduler kyber registered [ 1.078871] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.081820] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.081899] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.081972] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.082043] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.082152] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.087732] scrncapt: init (heads:4 wins:6 planes:4) [ 1.087937] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.088901] EINJ: ACPI disabled. [ 1.092307] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.092335] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.092378] tegra-pmc: ### PMC reset level: L1 [ 1.092392] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.092439] tegra-pmc: PMC Prod config success [ 1.098601] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.123794] random: fast init done [ 1.126941] printk: console [ttyTCU0] enabled [ 2.656518] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.660699] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.665310] arm-smmu 10000000.iommu: stage 1 translation [ 2.670845] arm-smmu 10000000.iommu: stage 2 translation [ 2.676509] arm-smmu 10000000.iommu: nested translation [ 2.681848] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.689023] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.700893] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.701863] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.708736] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.716244] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.721490] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.726215] arm-smmu 12000000.iommu: stage 1 translation [ 2.731981] arm-smmu 12000000.iommu: stage 2 translation [ 2.737149] arm-smmu 12000000.iommu: nested translation [ 2.742837] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.749756] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.761880] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.763106] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.769446] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.776994] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.786943] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.789914] tegra_profiler: auth: init [ 2.794360] THERMAL EST: found 3 subdevs [ 2.797535] THERMAL EST num_resources: 0 [ 2.801632] [THERMAL EST subdev 0] [ 2.804678] [THERMAL EST subdev 1] [ 2.808370] [THERMAL EST subdev 2] [ 2.811355] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.818114] THERMAL EST: thz register success. [ 2.822058] THERMAL EST: end of probe, return err: 0 [ 2.827679] nvsciipc: loaded module [ 2.835040] tun: Universal TUN/TAP device driver, 1.6 [ 2.836908] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.843372] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.848758] e1000e: Intel(R) PRO/1000 Network Driver [ 2.853871] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.859954] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.865245] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.871093] PPP generic driver version 2.4.2 [ 2.875680] PPP BSD Compression module registered [ 2.880228] PPP Deflate Compression module registered [ 2.885222] PPP MPPE Compression module registered [ 2.890482] usbcore: registered new interface driver r8152 [ 2.895737] usbcore: registered new interface driver asix [ 2.901071] usbcore: registered new interface driver ax88179_178a [ 2.907451] usbcore: registered new interface driver cdc_ether [ 2.913139] usbcore: registered new interface driver net1080 [ 2.919026] usbcore: registered new interface driver cdc_subset [ 2.924804] usbcore: registered new interface driver zaurus [ 2.930509] usbcore: registered new interface driver cdc_ncm [ 2.936151] usbcore: registered new interface driver aqc111 [ 2.941806] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.948131] ohci-pci: OHCI PCI platform driver [ 2.952429] ohci-platform: OHCI generic platform driver [ 2.958277] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.964425] usbcore: registered new interface driver uas [ 2.968476] usbcore: registered new interface driver usb-storage [ 2.974865] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.980983] mousedev: PS/2 mouse device common for all mice [ 2.985878] usbcore: registered new interface driver xpad [ 2.993819] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.996591] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.004484] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.011023] i2c /dev entries driver [ 3.014309] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.020081] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.025567] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.030979] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.036187] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.041629] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.046802] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.060597] device-mapper: uevent: version 1.0.3 [ 3.061150] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.067419] cpuidle: Initializing cpuidle driver [ 3.071122] sdhci: Secure Digital Host Controller Interface driver [ 3.075979] sdhci: Copyright(c) Pierre Ossman [ 3.080324] Synopsys Designware Multimedia Card Interface Driver [ 3.086476] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.092437] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.093114] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.105344] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.123965] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.133209] vdd-1v0: supplied by regulator-dummy [ 3.138767] vdd-1v8-hs: supplied by regulator-dummy [ 3.143468] vdd-1v8-ls: supplied by regulator-dummy [ 3.148334] vdd-1v8-ao: supplied by regulator-dummy [ 3.152219] vddio-ddr-1v1: supplied by regulator-dummy [ 3.156585] vdd-rtc: supplied by regulator-dummy [ 3.158309] spmic-ldo1: supplied by regulator-dummy [ 3.159513] vdd-ao-3v3: supplied by regulator-dummy [ 3.165731] vddio-emmc-3v3: supplied by regulator-dummy [ 3.171999] spmic-ldo4: supplied by regulator-dummy [ 3.173189] vdd-usb-3v3: supplied by regulator-dummy [ 3.179292] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.185592] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.191066] spmic-ldo8: supplied by vdd-1v8-ls [ 3.192481] gpio-510 (gpio_default): hogged as output/high [ 3.193809] gpio-511 (gpio_default): hogged as output/high [ 3.199692] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.337735] max77686-rtc max77620-rtc: registered as rtc0 [ 3.338725] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.339026] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.083931] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.084950] hid: raw HID events driver (C) Jiri Kosina [ 4.085584] usbcore: registered new interface driver usbhid [ 4.085710] usbhid: USB HID core driver [ 4.087336] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.088432] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.144096] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.219866] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.580 ms) ÿá[ 4.174136] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.174805] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.176092] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.177069] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.178806] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.179481] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.180078] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.181697] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.182083] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.184155] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.190410] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.196558] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.202510] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.209033] denver_knobs_init:MTS_VERSION:55637613 [ 4.220085] t19x_cache tegra-cache: probed [ 4.222499] optee: probing for conduit method. [ 4.223334] optee: revision 3.16 (65cc2218) [ 4.224149] optee: dynamic shared memory is enabled [ 4.229067] optee: initialized driver [ 4.234865] nvpmodel: initialized successfully [ 4.236291] tegra_hv: get_hvd: not initialized yet [ 4.241362] user_ivc_mempool: hypervisor not present [ 4.247147] usbcore: registered new interface driver snd-usb-audio [ 4.253931] u32 classifier [ 4.254772] input device check on [ 4.258613] Actions configured [ 4.262056] Initializing XFRM netlink socket [ 4.267132] NET: Registered protocol family 10 [ 4.273302] Segment Routing with IPv6 [ 4.274362] NET: Registered protocol family 17 [ 4.279082] NET: Registered protocol family 15 [ 4.283392] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.296874] Bluetooth: RFCOMM socket layer initialized [ 4.301584] Bluetooth: RFCOMM ver 1.11 [ 4.305457] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.311324] Bluetooth: HIDP socket layer initialized [ 4.316934] 9pnet: Installing 9P2000 support [ 4.320455] Key type dns_resolver registered [ 4.326210] registered taskstats version 1 [ 4.329023] Loading compiled-in X.509 certificates [ 4.341978] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.344647] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.355155] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.357023] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.365467] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.374227] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.488810] tegra194-pcie 14160000.pcie: Link up [ 4.491629] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.491849] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.492070] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.492309] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.492513] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.492943] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.493394] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.503016] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.503533] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.503980] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.505830] pci 0004:01:00.0: supports D1 D2 [ 4.506066] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.515297] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.515679] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.515993] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.516382] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.516628] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.517486] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.523408] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.530753] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.539593] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.550121] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.554580] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.559944] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.567085] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.575389] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.577275] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.585721] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.594426] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.709232] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.709956] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.710166] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.710326] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.710560] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.710808] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.711187] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.711648] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.726036] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.726328] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.727807] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.729187] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.730270] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.731578] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.732417] pci 0005:00:00.0: Removing from iommu group 7 [ 5.732663] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.762901] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.784405] host1x 13e10000.host1x: initialized [ 5.785839] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.786650] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.787642] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.788186] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.789303] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.789961] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.790928] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.792547] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.802679] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.809304] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.819446] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.826301] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.836194] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.843433] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.853135] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.860431] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.870067] falcon 15340000.vic: Adding to iommu group 17 [ 5.884139] falcon 15340000.vic: initialized [ 5.885128] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.890091] falcon 15380000.nvjpg: initialized [ 5.890590] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.903051] falcon 154c0000.nvenc: initialized [ 5.903694] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.913730] falcon 15a80000.nvenc1: initialized [ 5.914484] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.925381] nvdec 15480000.nvdec: initialized [ 5.925993] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.934659] nvdec 15140000.nvdec1: initialized [ 5.935331] tsec 15500000.tsec: Adding to iommu group 18 [ 5.940924] tsec 15500000.tsec: initialized [ 5.941401] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.950533] tsec 15100000.tsecb: initialized [ 5.954602] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.978639] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.990186] gpio-374 (wifi-enable): hogged as output/high [ 5.990464] gpio-431 (camera-control-output-low): hogged as output/low [ 5.990747] gpio-432 (camera-control-output-low): hogged as output/low [ 5.992293] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.994236] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.994780] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.001560] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.006825] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.012531] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.018033] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.027037] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.034139] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.046154] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.050545] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.056520] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.065141] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.074614] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.082368] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.089467] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.095748] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.105607] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.111461] pva 16000000.pva0: Adding to iommu group 22 [ 6.137214] pva 16000000.pva0: initialized [ 6.142625] pva 16800000.pva1: Adding to iommu group 23 [ 6.154149] pva 16800000.pva1: initialized [ 6.158604] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.171938] nvdla 15880000.nvdla0: initialized [ 6.173460] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.182565] nvdla 158c0000.nvdla1: initialized [ 6.187165] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.187464] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.187853] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.187870] tegradccommon 15200000.display-hub: dma mapping done [ 6.188184] tegradc 15200000.display: Adding to iommu group 26 [ 6.188615] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.190050] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.196206] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.198466] tegradc 15210000.display: Adding to iommu group 26 [ 6.198969] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.199109] generic_infoframe_type: 0x87 [ 6.199240] tegradc 15200000.display: DT parsed successfully [ 6.199397] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.201090] tegra_cec 3960000.tegra_cec: probed [ 6.203974] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.203986] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.203993] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.204906] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.204917] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.206272] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.209702] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.214551] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.218466] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.223196] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.233846] tegradc 15210000.display: disp0 connected to head1->sor [ 6.237544] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.244473] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.252655] kfuse 3830000.kfuse: initialized [ 6.260405] tegradc 15210000.display: DT parsed successfully [ 6.267019] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.272428] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.353126] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.360582] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.366874] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.376098] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.381058] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.390968] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.396055] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.416501] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.416945] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.419353] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.427624] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.436052] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.442839] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.450186] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.457354] usb usb1: Product: xHCI Host Controller [ 6.462531] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.468875] usb usb1: SerialNumber: 3610000.xhci [ 6.474479] hub 1-0:1.0: USB hub found [ 6.477472] hub 1-0:1.0: 4 ports detected [ 6.481974] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.486592] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.494453] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.502043] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.510113] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.517264] usb usb2: Product: xHCI Host Controller [ 6.522209] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.528428] usb usb2: SerialNumber: 3610000.xhci [ 6.533806] hub 2-0:1.0: USB hub found [ 6.536960] hub 2-0:1.0: 4 ports detected [ 6.578625] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.583874] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.585428] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.585627] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.599148] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.600241] tegra194-cpufreq ccplex: probed with BWMGR [ 6.601599] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.602092] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.602532] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.603638] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.611224] tegra194-vi5 15c10000.vi: initialized [ 6.612845] mmc0: CQHCI version 5.10 [ 6.612871] tegradc 15210000.display: disp0 connected to head1->sor [ 6.614197] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.620403] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.626890] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.634123] tegradc 15210000.display: DT parsed successfully [ 6.640783] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.641993] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.647674] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.647757] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.655125] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.655132] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.655137] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.660795] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.661986] generic_infoframe_type: 0x87 [ 6.669401] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.676250] tegradc 15200000.display: DT parsed successfully [ 6.682717] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.689346] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.697060] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.706457] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.718732] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.718737] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.749312] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.752773] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.765636] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.765940] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.772049] nvethernet 2490000.ethernet: Macsec not supported [ 6.802109] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.802878] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.808633] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.818195] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.830162] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.837471] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.839127] tegradc 15200000.display: probed [ 6.845490] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.856593] tegra-se-nvhost 15810000.se: initialized [ 6.865119] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.866347] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.869990] mmc0: Command Queue Engine enabled [ 6.873131] tegra-se-nvhost 15820000.se: initialized [ 6.876772] mmc0: periodic cache flush enabled [ 6.876793] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.883632] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.886666] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.893101] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.898975] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.916919] Console: switching to colour frame buffer device 240x67 [ 6.917240] tegra-se-nvhost 15830000.se: initialized [ 6.922702] tegradc 15200000.display: fb registered [ 6.922765] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.938854] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.939357] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.950492] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.951130] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.963974] tegra-se-nvhost 15840000.se: initialized [ 6.967500] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.969228] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.972265] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.975745] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.983554] tegra_actmon d230000.actmon: in actmon_register()... [ 6.990148] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.990153] usb 1-2: Manufacturer: Generic [ 6.992109] hub 1-2:1.0: USB hub found [ 6.997469] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.004397] hub 1-2:1.0: 4 ports detected [ 7.008553] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.034525] hvc_sysfs: hypervisor is not present [ 7.034904] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.065457] ALSA device list: [ 7.065695] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.065724] No soundcards found. [ 7.066598] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.068743] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.077574] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.083606] Extcon AUX1(HDMI) enable [ 7.087427] tegradc 15210000.display: disp1 connected to head1->sor [ 7.093604] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.101007] tegradc 15210000.display: DT parsed successfully [ 7.102126] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.106385] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.114924] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.114932] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.122745] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.129995] usb 2-3: Manufacturer: Generic [ 7.141237] hub 2-3:1.0: USB hub found [ 7.145027] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.151914] tegradc 15210000.display: probed [ 7.157036] hub 2-3:1.0: 4 ports detected [ 7.164050] tegradc 15210000.display: fb registered [ 7.172228] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.174471] Freeing unused kernel memory: 3968K [ 7.176265] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.188693] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.194029] tegradc 15210000.display: blank - powerdown [ 7.199112] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.200826] Run /init as init process [ 7.207236] Extcon DP: HPD disabled [ 7.207241] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.207255] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.214247] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.220790] usb 1-3: new full-speed USB device number 3 using tegra-xusb ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.240476] tegradc 15200000.display: blank - powerdown [ 7.264762] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.285315] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.285319] Extcon AUX1(HDMI) disable [ 7.308672] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.309676] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.319957] tegradc 15200000.display: unblank [ 7.321066] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.321275] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.327092] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.328954] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.329312] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.329318] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.333068] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.333073] Extcon AUX1(HDMI) enable [ 7.345708] tegradc 15200000.display: sync windows ret = 247 [ 7.370108] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.375744] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.375749] usb 1-3: Product: Bluetooth Radio [ 7.375753] usb 1-3: Manufacturer: Realtek [ 7.375757] usb 1-3: SerialNumber: 00e04c000001 [ 7.381714] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.388321] Extcon HDMI: HPD enabled [ 7.391797] tegradc 15200000.display: hdmi: plugged [ 7.432080] Root device found: mmcblk0p1 [ 7.435571] Found dev node: /dev/mmcblk0p1 [ 7.471712] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.477202] Rootfs mounted over mmcblk0p1 [ 7.508311] Switching from initrd to actual rootfs [ 7.608853] random: crng init done [ 7.670457] systemd[1]: System time before build time, advancing clock. [ 7.742138] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.747149] systemd[1]: Detected architecture arm64. [ 7.788648] systemd[1]: Set hostname to . [ 7.956306] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.314872] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.316571] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.322378] systemd[1]: Created slice system-modprobe.slice. [ 8.327235] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.331500] systemd[1]: Created slice User and Session Slice. [ 8.335093] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.339419] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.342862] systemd[1]: Reached target User and Group Name Lookups. [ 8.346099] systemd[1]: Reached target Slices. [ 8.349311] systemd[1]: Reached target Swap. [ 8.353360] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.356972] systemd[1]: Listening on Syslog Socket. [ 8.360505] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.363988] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.368254] systemd[1]: Listening on Journal Audit Socket. [ 8.371866] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.375708] systemd[1]: Listening on Journal Socket. [ 8.379483] systemd[1]: Listening on udev Control Socket. [ 8.383088] systemd[1]: Listening on udev Kernel Socket. [ 8.392665] systemd[1]: Mounting Huge Pages File System... [ 8.401148] systemd[1]: Mounting POSIX Message Queue File System... [ 8.410272] systemd[1]: Mounting RPC Pipe File System... [ 8.418730] systemd[1]: Mounting Kernel Debug File System... [ 8.426703] systemd[1]: Mounting Kernel Trace File System... [ 8.436617] systemd[1]: Starting Journal Service... [ 8.445445] systemd[1]: Starting Set the console keyboard layout... [ 8.453636] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.457208] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.463420] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.471225] systemd[1]: Started Nameserver information manager. [ 8.476057] systemd[1]: Reached target Network (Pre). [ 8.483195] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.485127] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.492147] systemd[1]: Starting Load Kernel Modules... [ 8.500109] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.508384] systemd[1]: Starting udev Coldplug all Devices... [ 8.518502] systemd[1]: Mounted Huge Pages File System. [ 8.522334] systemd[1]: Mounted POSIX Message Queue File System. [ 8.526044] systemd[1]: Mounted RPC Pipe File System. [ 8.527688] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.534763] systemd[1]: Mounted Kernel Debug File System. [ 8.535246] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.538581] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.538589] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.538599] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.538603] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.539039] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.539207] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.539217] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.539596] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.553269] systemd[1]: Mounted Kernel Trace File System. [ 8.562240] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.568938] systemd[1]: nvfb-udev.service: Succeeded. [ 8.573392] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.586131] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.599192] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.601300] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.607601] systemd[1]: Starting Load/Save Random Seed... [ 8.617901] systemd[1]: Starting Create System Users... [ 8.624048] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.624048] [ 8.662182] systemd[1]: Finished Load/Save Random Seed. [ 8.669248] systemd[1]: Finished Load Kernel Modules. [ 8.674332] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.681173] systemd[1]: Mounting Kernel Configuration File System... [ 8.689057] systemd[1]: Started OP-TEE Client Supplicant. [ 8.697220] systemd[1]: Starting Apply Kernel Variables... [ 8.706350] systemd[1]: Mounted Kernel Configuration File System. [ 8.714686] systemd[1]: Finished Set the console keyboard layout. [ 8.725276] systemd[1]: Finished Create System Users. [ 10.239101] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.246142] imx219 9-0010: board setup failed [ 10.247442] imx219: probe of 9-0010 failed with error -121 [ 10.259637] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.266205] imx219 10-0010: board setup failed [ 10.267533] imx219: probe of 10-0010 failed with error -121 [ 10.394712] hot-surface-alert cooling state: 0 -> 1 [ 10.835060] using random self ethernet address [ 10.836267] using random host ethernet address [ 12.113812] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.115186] Creating 1 MTD partitions on "spi6.0": [ 12.116423] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.371234] using random self ethernet address [ 12.372495] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.853803] nvidia: loading out-of-tree module taints kernel. [ 58.410591] watchdog: watchdog0: watchdog did not stop! [ 58.889742] Trying to unregister non-registered hwtime source [ 61.951703] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.953496] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxÿÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.606] I> retrieved tmds range from prod_list_hdmi_soc [0003.611] E> invalid display type [0003.612] E> cannot find any other nvdisp nodes [0003.628] I> edid read success [0003.640] I> edid read success [0003.641] I> width = 640, height = 480, frequency = 25174825 [0003.641] I> width = 1920, height = 1080, frequency = 148500000 [0003.642] I> width = 1280, height = 768, frequency = 79500000 [0003.642] I> width = 1360, height = 768, frequency = 85500000 [0003.642] I> width = 720, height = 480, frequency = 26973026 [0003.646] I> width = 720, height = 576, frequency = 26973026 [0003.652] I> width = 1280, height = 720, frequency = 74175824 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1920, height = 1080, frequency = 148351648 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 720, height = 480, frequency = 26973026 [0003.680] I> width = 720, height = 576, frequency = 26973026 [0003.686] I> width = 3840, height = 2160, frequency = 296703296 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 4096, height = 2160, frequency = 296703296 [0003.714] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.726] I> hdmi_enable, starting HDMI initialisation [0003.730] I> hdmi_enable, HDMI initialisation complete [0003.739] initializing target [0003.740] calling apps_init() [0003.741] starting app kernel_boot_app [0003.741] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000684] Console: colour dummy device 80x25 [ 0.002245] printk: console [tty0] enabled [ 0.002308] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002344] pid_max: default: 32768 minimum: 301 [ 0.002603] LSM: Security Framework initializing [ 0.002710] Yama: becoming mindful. [ 0.002752] SELinux: Initializing. [ 0.002909] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002957] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006077] rcu: Hierarchical SRCU implementation. [ 0.006372] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007121] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007156] DTB Build time: Aug 10 2022 20:31:49 [ 0.009990] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010251] Remapping and enabling EFI services. [ 0.012232] smp: Bringing up secondary CPUs ... [ 0.044207] Detected PIPT I-cache on CPU1 [ 0.044337] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.076725] Detected PIPT I-cache on CPU2 [ 0.076880] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.106439] Detected PIPT I-cache on CPU3 [ 0.106581] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.136241] Detected PIPT I-cache on CPU4 [ 0.136340] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.166322] Detected PIPT I-cache on CPU5 [ 0.166478] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166860] smp: Brought up 1 node, 6 CPUs [ 0.167088] SMP: Total of 6 processors activated. [ 0.167138] CPU features: detected: Privileged Access Never [ 0.167161] CPU features: detected: LSE atomic instructions [ 0.167174] CPU features: detected: User Access Override [ 0.167187] CPU features: detected: 32-bit EL0 Support [ 0.167199] CPU features: detected: RAS Extension Support [ 0.167211] CPU features: detected: CRC32 instructions [ 0.167222] CPU features: detected: 32-bit EL1 Support [ 0.237248] CPU: All CPU(s) started at EL2 [ 0.242917] devtmpfs: initialized [ 0.287552] Registered cp15_barrier emulation handler [ 0.287677] Registered setend emulation handler [ 0.287697] KASLR enabled [ 0.287942] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287964] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289311] pinctrl core: initialized pinctrl subsystem [ 0.290400] SMBIOS 3.0.0 present. [ 0.290429] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291119] NET: Registered protocol family 16 [ 0.293019] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293541] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294516] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294575] audit: initializing netlink subsys (disabled) [ 0.294855] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.295278] thermal_sys: Registered thermal governor 'step_wise' [ 0.295285] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295300] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.297559] cpuidle: using governor menu [ 0.297863] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.298307] ASID allocator initialised with 32768 entries [ 0.298569] Serial: AMBA PL011 UART driver [ 0.301750] Tegra reboot handler registered. [ 0.373588] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.373717] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.373900] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.373945] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.374071] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.374112] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.374264] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.374305] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.374452] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.374493] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.376642] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.376679] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.376709] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.376740] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.376771] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.376800] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.376838] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.376868] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.376896] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.376926] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.376952] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.376979] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.377005] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.377034] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.377063] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.377089] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.377129] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.377228] mc-err: mcerr ops are set to t19x [ 0.389491] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.389516] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.389529] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.389540] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.396446] ACPI: Interpreter disabled. [ 0.397496] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.398825] iommu: Default domain type: Translated [ 0.398926] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.399335] SCSI subsystem initialized [ 0.399506] usbcore: registered new interface driver usbfs [ 0.399544] usbcore: registered new interface driver hub [ 0.399576] usbcore: registered new device driver usb [ 0.399929] mc: Linux media interface: v0.10 [ 0.399958] videodev: Linux video capture interface: v2.00 [ 0.400229] pps_core: LinuxPPS API ver. 1 registered [ 0.400239] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.400259] PTP clock support registered [ 0.400447] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.400791] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.400875] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.401519] Registered efivars operations [ 0.406898] FPGA manager framework [ 0.407009] Advanced Linux Sound Architecture Driver Initialized. [ 0.407623] Bluetooth: Core ver 2.22 [ 0.407660] NET: Registered protocol family 31 [ 0.407671] Bluetooth: HCI device and connection manager initialized [ 0.407686] Bluetooth: HCI socket layer initialized [ 0.407701] Bluetooth: L2CAP socket layer initialized [ 0.407721] Bluetooth: SCO socket layer initialized [ 0.409853] camchar: rtcpu character device driver loaded [ 0.410864] clocksource: Switched to clocksource arch_sys_counter [ 0.823623] VFS: Disk quotas dquot_6.6.0 [ 0.823715] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.824159] pnp: PnP ACPI: disabled [ 0.838691] la/ptsa driver initialized. [ 0.838919] NET: Registered protocol family 2 [ 0.839144] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.846890] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.847092] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.847448] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.848084] TCP: Hash tables configured (established 65536 bind 65536) [ 0.848247] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.848411] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.848682] NET: Registered protocol family 1 [ 0.849396] RPC: Registered named UNIX socket transport module. [ 0.849422] RPC: Registered udp transport module. [ 0.849439] RPC: Registered tcp transport module. [ 0.849458] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.849483] PCI: CLS 0 bytes, default 64 [ 0.849773] Trying to unpack rootfs image as initramfs... [ 1.119708] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.122842] Freeing initrd memory: 8196K [ 1.127684] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.127750] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.127798] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.128211] kvm [1]: IPA Size Limit: 40 bits [ 1.128861] kvm [1]: vgic interrupt IRQ9 [ 1.129487] kvm [1]: VHE mode initialized successfully [ 1.131321] Initialise system trusted keyrings [ 1.131658] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.139509] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.140423] NFS: Registering the id_resolver key type [ 1.140464] Key type id_resolver registered [ 1.140480] Key type id_legacy registered [ 1.140599] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.140651] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.140689] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.151159] NET: Registered protocol family 38 [ 1.151183] Key type asymmetric registered [ 1.151197] Asymmetric key parser 'x509' registered [ 1.151258] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.151572] io scheduler mq-deadline registered [ 1.151592] io scheduler kyber registered [ 1.158355] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.161747] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.161828] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.161900] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.162000] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.162104] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.168106] scrncapt: init (heads:4 wins:6 planes:4) [ 1.168472] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.169454] EINJ: ACPI disabled. [ 1.173191] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.173217] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.173231] tegra-pmc: ### PMC reset level: L1 [ 1.173245] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.173294] tegra-pmc: PMC Prod config success [ 1.179348] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.195275] random: fast init done [ 1.196404] printk: console [ttyTCU0] enabled [ 2.736838] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.741400] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.746293] arm-smmu 10000000.iommu: stage 1 translation [ 2.751691] arm-smmu 10000000.iommu: stage 2 translation [ 2.756916] arm-smmu 10000000.iommu: nested translation [ 2.762533] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.769435] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.779874] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.782786] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.789143] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.797126] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.802151] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.806875] arm-smmu 12000000.iommu: stage 1 translation [ 2.812384] arm-smmu 12000000.iommu: stage 2 translation [ 2.818066] arm-smmu 12000000.iommu: nested translation [ 2.823495] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.830675] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.840771] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.843799] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.850101] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.857499] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.867772] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.870523] tegra_profiler: auth: init [ 2.875127] THERMAL EST: found 3 subdevs [ 2.878423] THERMAL EST num_resources: 0 [ 2.882046] [THERMAL EST subdev 0] [ 2.885619] [THERMAL EST subdev 1] [ 2.888777] [THERMAL EST subdev 2] [ 2.892016] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.898546] THERMAL EST: thz register success. [ 2.902973] THERMAL EST: end of probe, return err: 0 [ 2.908018] nvsciipc: loaded module [ 2.915195] tun: Universal TUN/TAP device driver, 1.6 [ 2.917612] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.923783] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.929615] e1000e: Intel(R) PRO/1000 Network Driver [ 2.934271] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.940638] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.945903] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.952098] PPP generic driver version 2.4.2 [ 2.956339] PPP BSD Compression module registered [ 2.960629] PPP Deflate Compression module registered [ 2.966127] PPP MPPE Compression module registered [ 2.971162] usbcore: registered new interface driver r8152 [ 2.976660] usbcore: registered new interface driver asix [ 2.981983] usbcore: registered new interface driver ax88179_178a [ 2.987848] usbcore: registered new interface driver cdc_ether [ 2.994055] usbcore: registered new interface driver net1080 [ 2.999397] usbcore: registered new interface driver cdc_subset [ 3.005441] usbcore: registered new interface driver zaurus [ 3.011134] usbcore: registered new interface driver cdc_ncm [ 3.016821] usbcore: registered new interface driver aqc111 [ 3.022481] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.028522] ohci-pci: OHCI PCI platform driver [ 3.033089] ohci-platform: OHCI generic platform driver [ 3.038972] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.045065] usbcore: registered new interface driver uas [ 3.049418] usbcore: registered new interface driver usb-storage [ 3.055300] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.061598] mousedev: PS/2 mouse device common for all mice [ 3.066296] usbcore: registered new interface driver xpad [ 3.074305] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.077073] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.085060] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.091395] i2c /dev entries driver [ 3.094957] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.100695] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.106085] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.111228] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.116529] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.122042] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.127711] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.141415] device-mapper: uevent: version 1.0.3 [ 3.141844] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.148589] cpuidle: Initializing cpuidle driver [ 3.152251] sdhci: Secure Digital Host Controller Interface driver [ 3.156882] sdhci: Copyright(c) Pierre Ossman [ 3.160724] Synopsys Designware Multimedia Card Interface Driver [ 3.167191] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.172868] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.173635] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.186466] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.207511] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.217297] vdd-1v0: supplied by regulator-dummy [ 3.222791] vdd-1v8-hs: supplied by regulator-dummy [ 3.227601] vdd-1v8-ls: supplied by regulator-dummy [ 3.232330] vdd-1v8-ao: supplied by regulator-dummy [ 3.236249] vddio-ddr-1v1: supplied by regulator-dummy [ 3.240633] vdd-rtc: supplied by regulator-dummy [ 3.242366] spmic-ldo1: supplied by regulator-dummy [ 3.243592] vdd-ao-3v3: supplied by regulator-dummy [ 3.249714] vddio-emmc-3v3: supplied by regulator-dummy [ 3.255985] spmic-ldo4: supplied by regulator-dummy [ 3.257186] vdd-usb-3v3: supplied by regulator-dummy [ 3.263409] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.269700] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.275193] spmic-ldo8: supplied by vdd-1v8-ls [ 3.276663] gpio-510 (gpio_default): hogged as output/high [ 3.278050] gpio-511 (gpio_default): hogged as output/high [ 3.280947] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.419026] max77686-rtc max77620-rtc: registered as rtc0 [ 3.420414] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.420766] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.233279] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.234336] hid: raw HID events driver (C) Jiri Kosina [ 4.235123] usbcore: registered new interface driver usbhid [ 4.235286] usbhid: USB HID core driver [ 4.237320] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.238615] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.216969] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.291588] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.427 ms) ÿá[ 4.323575] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.324245] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.325261] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.326008] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.327640] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.328436] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.329190] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.330606] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.330806] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.333726] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.334057] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.334110] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.339927] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.360559] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.366625] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.371407] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.378038] denver_knobs_init:MTS_VERSION:55637613 [ 4.389850] t19x_cache tegra-cache: probed [ 4.392729] optee: probing for conduit method. [ 4.393554] optee: revision 3.16 (65cc2218) [ 4.394442] optee: dynamic shared memory is enabled [ 4.398618] optee: initialized driver [ 4.404657] nvpmodel: initialized successfully [ 4.406170] tegra_hv: get_hvd: not initialized yet [ 4.411099] user_ivc_mempool: hypervisor not present [ 4.417000] usbcore: registered new interface driver snd-usb-audio [ 4.423426] u32 classifier [ 4.424836] input device check on [ 4.428550] Actions configured [ 4.432176] Initializing XFRM netlink socket [ 4.436872] NET: Registered protocol family 10 [ 4.444270] Segment Routing with IPv6 [ 4.444557] NET: Registered protocol family 17 [ 4.448510] NET: Registered protocol family 15 [ 4.453198] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.467026] Bluetooth: RFCOMM socket layer initialized [ 4.471182] Bluetooth: RFCOMM ver 1.11 [ 4.475047] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.480945] Bluetooth: HIDP socket layer initialized [ 4.487302] 9pnet: Installing 9P2000 support [ 4.490586] Key type dns_resolver registered [ 4.496230] registered taskstats version 1 [ 4.498721] Loading compiled-in X.509 certificates [ 4.511397] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.514509] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.525044] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.526671] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.535582] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.543673] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.659103] tegra194-pcie 14160000.pcie: Link up [ 4.662064] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.662270] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.662389] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.662574] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.662734] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.663182] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.663588] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.676111] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.676500] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.676974] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.678485] pci 0004:01:00.0: supports D1 D2 [ 4.678629] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.686650] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.686954] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.687166] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.687501] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.687701] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.687847] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.693934] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.701054] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.709578] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.719803] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.724574] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.730127] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.736746] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.746736] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.747663] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.756008] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.764729] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.879919] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.880493] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.880835] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.880969] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.881280] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.881609] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.882204] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.882736] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.902408] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.902816] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.904514] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.905581] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.906814] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.908517] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.909436] pci 0005:00:00.0: Removing from iommu group 7 [ 5.909949] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.943470] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.967429] host1x 13e10000.host1x: initialized [ 5.968951] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.969934] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.971271] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.971975] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.973311] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.973861] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.975212] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.975882] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.976951] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.979824] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.990079] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.996760] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.007132] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.013996] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.023751] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.030844] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.040807] falcon 15340000.vic: Adding to iommu group 17 [ 6.055661] falcon 15340000.vic: initialized [ 6.056607] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.062368] falcon 15380000.nvjpg: initialized [ 6.063034] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.074195] falcon 154c0000.nvenc: initialized [ 6.074723] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.084051] falcon 15a80000.nvenc1: initialized [ 6.084661] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.096872] nvdec 15480000.nvdec: initialized [ 6.097327] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.106931] nvdec 15140000.nvdec1: initialized [ 6.107466] tsec 15500000.tsec: Adding to iommu group 18 [ 6.113019] tsec 15500000.tsec: initialized [ 6.113442] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.121399] tsec 15100000.tsecb: initialized [ 6.125331] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.152456] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.163511] gpio-374 (wifi-enable): hogged as output/high [ 6.163776] gpio-431 (camera-control-output-low): hogged as output/low [ 6.164059] gpio-432 (camera-control-output-low): hogged as output/low [ 6.165519] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.167445] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.167960] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.172404] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.177762] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.183547] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.188983] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.197611] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.204700] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.216593] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.221390] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.227264] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.235876] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.245429] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.252519] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.259918] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.266508] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.275972] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.282352] pva 16000000.pva0: Adding to iommu group 22 [ 6.308793] pva 16000000.pva0: initialized [ 6.313439] pva 16800000.pva1: Adding to iommu group 23 [ 6.325384] pva 16800000.pva1: initialized [ 6.330015] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.343745] nvdla 15880000.nvdla0: initialized [ 6.345254] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.353769] nvdla 158c0000.nvdla1: initialized [ 6.356297] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.356669] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.357050] tegradccommon 15200000.display-hub: dma mapping done [ 6.359206] tegradc 15200000.display: Adding to iommu group 26 [ 6.369398] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.369943] generic_infoframe_type: 0x87 [ 6.370258] tegradc 15200000.display: DT parsed successfully [ 6.370623] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.371886] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.373498] tegradc 15210000.display: Adding to iommu group 26 [ 6.378520] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.380314] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.381017] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.381089] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.381094] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.382021] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.382034] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.383433] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.386276] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.390417] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.397086] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.404434] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.415085] tegradc 15210000.display: disp0 connected to head1->sor [ 6.420364] tegra_cec 3960000.tegra_cec: probed [ 6.426294] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.433284] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.443718] tegradc 15210000.display: DT parsed successfully [ 6.457927] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.463411] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.469579] kfuse 3830000.kfuse: initialized [ 6.518116] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.524170] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.530813] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.537491] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.547393] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.551700] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.561158] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.566961] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.586985] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.587384] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.590070] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.598136] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.606756] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.613648] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.620865] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.628033] usb usb1: Product: xHCI Host Controller [ 6.633281] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.639592] usb usb1: SerialNumber: 3610000.xhci [ 6.645180] hub 1-0:1.0: USB hub found [ 6.647895] hub 1-0:1.0: 4 ports detected [ 6.652642] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.657257] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.665139] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.672802] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.680454] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.687701] usb usb2: Product: xHCI Host Controller [ 6.692939] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.699152] usb usb2: SerialNumber: 3610000.xhci [ 6.704713] hub 2-0:1.0: USB hub found [ 6.707628] hub 2-0:1.0: 4 ports detected [ 6.750034] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.756250] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.757815] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.757970] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.772215] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.773308] tegra194-cpufreq ccplex: probed with BWMGR [ 6.774682] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.775268] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.775791] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.777032] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.784724] tegra194-vi5 15c10000.vi: initialized [ 6.786438] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.787553] generic_infoframe_type: 0x87 [ 6.787734] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.791509] tegradc 15200000.display: DT parsed successfully [ 6.797927] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.803806] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.811691] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.811699] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.811724] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.811730] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.819765] mmc0: CQHCI version 5.10 [ 6.825917] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.834921] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.839058] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.839066] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.845881] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.849925] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.857804] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.861616] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.864170] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.873866] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.880474] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.887137] nvethernet 2490000.ethernet: Macsec not supported [ 6.894401] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.901777] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.908123] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.910913] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.915220] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.923674] tegradc 15200000.display: probed [ 6.932667] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.948179] mmc0: Command Queue Engine enabled [ 6.953910] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.961378] mmc0: periodic cache flush enabled [ 6.961395] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.962155] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.969223] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.974009] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.025873] Console: switching to colour frame buffer device 240x67 [ 7.027485] tegra-se-nvhost 15810000.se: initialized [ 7.031753] tegradc 15200000.display: fb registered [ 7.037776] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.041938] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.050326] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.056564] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.062234] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.068020] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.074651] tegra-se-nvhost 15820000.se: initialized [ 7.086468] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.086560] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.093012] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.099879] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.106414] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.113628] tegra-se-nvhost 15830000.se: initialized [ 7.117578] usb 1-2: Manufacturer: Generic [ 7.119639] hub 1-2:1.0: USB hub found [ 7.128060] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.131733] hub 1-2:1.0: 4 ports detected [ 7.132593] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.133760] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.133768] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.134370] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.134374] Extcon AUX1(HDMI) enable [ 7.137107] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.140685] tegradc 15210000.display: disp1 connected to head1->sor [ 7.150411] tegra-se-nvhost 15840000.se: initialized [ 7.157555] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.167061] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.172356] tegradc 15210000.display: DT parsed successfully [ 7.176048] random: crng init done [ 7.177622] tegra_actmon d230000.actmon: in actmon_register()... [ 7.182178] tegradc 15210000.display: Display dc.0000000062d4e426 registered with id=1 [ 7.188182] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.193106] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.200842] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.206378] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.207778] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.212546] hvc_sysfs: hypervisor is not present [ 7.216472] tegradc 15210000.display: probed [ 7.247930] ALSA device list: [ 7.252221] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.255128] No soundcards found. [ 7.286609] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.286614] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.286618] usb 2-3: Manufacturer: Generic [ 7.302826] tegradc 15210000.display: fb registered [ 7.306271] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.314914] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.314924] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.315037] tegradc 15200000.display: blank - powerdown [ 7.319331] hub 2-3:1.0: USB hub found [ 7.321162] hub 2-3:1.0: 4 ports detected [ 7.349630] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.349634] Extcon AUX1(HDMI) disable [ 7.370890] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.372996] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.373848] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.385554] tegradc 15200000.display: unblank [ 7.386611] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.386820] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.392673] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.394539] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.398576] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.398579] Extcon AUX1(HDMI) enable [ 7.411331] tegradc 15200000.display: sync windows ret = 246 [ 7.422925] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.444693] tegradc 15210000.display: blank - powerdown [ 7.445674] Freeing unused kernel memory: 3968K [ 7.446178] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.447758] Run /init as init process [ 7.451474] Extcon DP: HPD disabled [ 7.459073] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.459109] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.459114] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.478567] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.486026] Extcon HDMI: HPD enabled [ 7.489372] tegradc 15200000.display: hdmi: plugged [ 7.497173] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.500921] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.528114] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.529695] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.531166] usb 1-3: Product: Bluetooth Radio [ 7.531981] Root device found: mmcblk0p1 [ 7.532546] usb 1-3: Manufacturer: Realtek [ 7.532554] usb 1-3: SerialNumber: 00e04c000001 [ 7.536009] Found dev node: /dev/mmcblk0p1 [ 7.578093] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.583490] Rootfs mounted over mmcblk0p1 [ 7.613494] Switching from initrd to actual rootfs [ 7.782046] systemd[1]: System time before build time, advancing clock. [ 7.856302] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.861194] systemd[1]: Detected architecture arm64. [ 7.902187] systemd[1]: Set hostname to . [ 8.068001] systemd-sysv-generator[257]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.418966] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.420765] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.426394] systemd[1]: Created slice system-modprobe.slice. [ 8.431235] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.435506] systemd[1]: Created slice User and Session Slice. [ 8.438927] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.443131] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.446458] systemd[1]: Reached target User and Group Name Lookups. [ 8.449647] systemd[1]: Reached target Slices. [ 8.452731] systemd[1]: Reached target Swap. [ 8.456736] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.460380] systemd[1]: Listening on Syslog Socket. [ 8.463910] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.467396] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.471637] systemd[1]: Listening on Journal Audit Socket. [ 8.475252] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.480584] systemd[1]: Listening on Journal Socket. [ 8.485872] systemd[1]: Listening on udev Control Socket. [ 8.489419] systemd[1]: Listening on udev Kernel Socket. [ 8.497845] systemd[1]: Mounting Huge Pages File System... [ 8.506099] systemd[1]: Mounting POSIX Message Queue File System... [ 8.514205] systemd[1]: Mounting RPC Pipe File System... [ 8.522926] systemd[1]: Mounting Kernel Debug File System... [ 8.531279] systemd[1]: Mounting Kernel Trace File System... [ 8.540865] systemd[1]: Starting Journal Service... [ 8.549739] systemd[1]: Starting Set the console keyboard layout... [ 8.557885] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.561576] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.568044] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.576075] systemd[1]: Started Nameserver information manager. [ 8.580850] systemd[1]: Reached target Network (Pre). [ 8.588052] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.589919] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.596465] systemd[1]: Starting Load Kernel Modules... [ 8.604563] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.613380] systemd[1]: Starting udev Coldplug all Devices... [ 8.623638] systemd[1]: Mounted Huge Pages File System. [ 8.627411] systemd[1]: Mounted POSIX Message Queue File System. [ 8.632308] systemd[1]: Mounted RPC Pipe File System. [ 8.633638] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.638153] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.639998] systemd[1]: Mounted Kernel Debug File System. [ 8.640551] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.643123] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.643135] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.643139] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.643490] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.644791] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.646359] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.652398] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.658280] systemd[1]: Mounted Kernel Trace File System. [ 8.666003] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.673995] systemd[1]: nvfb-udev.service: Succeeded. [ 8.679214] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.689583] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.701356] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.703151] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.712045] systemd[1]: Starting Load/Save Random Seed... [ 8.720533] systemd[1]: Starting Create System Users... [ 8.751278] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.751278] [ 8.773964] systemd[1]: Finished Load/Save Random Seed. [ 8.783986] systemd[1]: Finished Load Kernel Modules. [ 8.788883] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.795911] systemd[1]: Mounting Kernel Configuration File System... [ 8.803988] systemd[1]: Started OP-TEE Client Supplicant. [ 8.813501] systemd[1]: Starting Apply Kernel Variables... [ 8.824045] systemd[1]: Finished Set the console keyboard layout. [ 8.828494] systemd[1]: Mounted Kernel Configuration File System. [ 8.840134] systemd[1]: Finished Create System Users. [ 8.851865] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.171318] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.179553] imx219 9-0010: board setup failed [ 10.180852] imx219: probe of 9-0010 failed with error -121 [ 10.193110] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.202979] imx219 10-0010: board setup failed [ 10.204305] imx219: probe of 10-0010 failed with error -121 [ 10.282144] hot-surface-alert cooling state: 0 -> 1 [ 10.896587] using random self ethernet address [ 10.897792] using random host ethernet address [ 11.613149] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.614513] Creating 1 MTD partitions on "spi6.0": [ 11.615827] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.392099] using random self ethernet address [ 12.393845] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.828068] nvidia: loading out-of-tree module taints kernel. [ 59.152275] watchdog: watchdog0: watchdog did not stop! [ 59.612455] Trying to unregister non-registered hwtime source [ 62.670885] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.672423] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [Åÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.034] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.045] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.060] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.086] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.095] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.107] I> Temperature = 69500 [0000.110] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.143] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.163] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.178] W> MEMIO rail config not found in BCT [0000.188] I> Qspi flash params source = mb1bct [0000.201] I> Qspi flash params source = mb1bct [0000.235] I> Qspi flash params source = mb1bct [0000.799] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.855] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.928] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.939] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.961] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.327] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.361] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.035] > DEVICE_PROD: device prod is not initialized. [0002.340] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.341] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.342] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.342] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.343] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.343] I> dram_block larger than 80000000 [0002.345] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.357] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.360] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized ÿä1ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä 03ÿâdmce initialized cvc initialized ÿä:23:20 UTC 20ÿâavfs_clk_mach_post initialized ÿä22 aÿâavfs_clk_platform_post initialized ÿäarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNING:ÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.210] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.211] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.211] I> 2) Base:0xc9800000 Size:0x00200000 [0003.212] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.219] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.228] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.250] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.259] I> 14) Base:0x40048000 Size:0x00002000 [0003.263] I> 15) Base:0xaf000000 Size:0x00004000 [0003.268] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.277] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.286] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.308] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.317] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.321] I> 28) Base:0xc8400000 Size:0x00200000 [0003.326] I> 29) Base:0xc8800000 Size:0x00400000 [0003.330] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.335] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.344] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.375] I> 40) Base:0x00000000 Size:0x00000000 [0003.379] I> 41) Base:0x00000000 Size:0x00000000 [0003.384] I> 42) Base:0x00000000 Size:0x00000000 [0003.388] I> 43) Base:0x00000000 Size:0x00000000 [0003.393] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.402] GIC-SPI Target CPU: 0 [0003.405] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.417] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.427] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.435] initializing platform [0003.438] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.447] I> Bl_dtb @0xadf00000 [0003.450] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.493] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.494] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.499] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.525] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.544] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.557] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.609] W> set volts not configured for 'vdd-1v0' [0003.615] W> set volts not configured for 'vdd-1v8-hs' [0003.615] I> retrieved tmds range from prod_list_hdmi_soc [0003.621] E> invalid display type [0003.622] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.651] I> edid read success [0003.651] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.652] I> width = 1280, height = 768, frequency = 79500000 [0003.652] I> width = 1360, height = 768, frequency = 85500000 [0003.653] I> width = 720, height = 480, frequency = 26973026 [0003.657] I> width = 720, height = 576, frequency = 26973026 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 4096, height = 2160, frequency = 296703296 [0003.725] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.736] I> hdmi_enable, starting HDMI initialisation [0003.741] I> hdmi_enable, HDMI initialisation complete [0003.751] initializing target [0003.751] calling apps_init() [0003.752] starting app kernel_boot_app [0003.753] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000959] Console: colour dummy device 80x25 [ 0.002493] printk: console [tty0] enabled [ 0.002564] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002600] pid_max: default: 32768 minimum: 301 [ 0.002837] LSM: Security Framework initializing [ 0.002895] Yama: becoming mindful. [ 0.002937] SELinux: Initializing. [ 0.003128] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003165] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006205] rcu: Hierarchical SRCU implementation. [ 0.006479] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007234] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007294] DTB Build time: Aug 10 2022 20:31:49 [ 0.009916] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010173] Remapping and enabling EFI services. [ 0.012698] smp: Bringing up secondary CPUs ... [ 0.044739] Detected PIPT I-cache on CPU1 [ 0.044842] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074338] Detected PIPT I-cache on CPU2 [ 0.074488] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104108] Detected PIPT I-cache on CPU3 [ 0.104196] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133976] Detected PIPT I-cache on CPU4 [ 0.134086] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163755] Detected PIPT I-cache on CPU5 [ 0.163944] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164330] smp: Brought up 1 node, 6 CPUs [ 0.164518] SMP: Total of 6 processors activated. [ 0.164532] CPU features: detected: Privileged Access Never [ 0.164543] CPU features: detected: LSE atomic instructions [ 0.164569] CPU features: detected: User Access Override [ 0.164581] CPU features: detected: 32-bit EL0 Support [ 0.164592] CPU features: detected: RAS Extension Support [ 0.164604] CPU features: detected: CRC32 instructions [ 0.164615] CPU features: detected: 32-bit EL1 Support [ 0.235379] CPU: All CPU(s) started at EL2 [ 0.240796] devtmpfs: initialized [ 0.289986] Registered cp15_barrier emulation handler [ 0.290112] Registered setend emulation handler [ 0.290135] KASLR enabled [ 0.290414] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.290439] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291813] pinctrl core: initialized pinctrl subsystem [ 0.292888] SMBIOS 3.0.0 present. [ 0.292918] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.293554] NET: Registered protocol family 16 [ 0.295516] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296018] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296709] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296766] audit: initializing netlink subsys (disabled) [ 0.297027] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.297441] thermal_sys: Registered thermal governor 'step_wise' [ 0.297447] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297460] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299527] cpuidle: using governor menu [ 0.299854] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300280] ASID allocator initialised with 32768 entries [ 0.300503] Serial: AMBA PL011 UART driver [ 0.303826] Tegra reboot handler registered. [ 0.373622] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.373794] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.373971] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.374010] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.374120] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.374159] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.374318] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.374410] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.374529] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.374567] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.376759] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.376793] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.376823] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.376849] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.376876] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.376922] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.376963] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.376987] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.377025] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.377049] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.377072] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.377095] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.377119] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.377142] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.377165] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.377188] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.377211] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.377294] mc-err: mcerr ops are set to t19x [ 0.390128] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390153] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390166] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390179] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397779] ACPI: Interpreter disabled. [ 0.399037] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400312] iommu: Default domain type: Translated [ 0.400393] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400777] SCSI subsystem initialized [ 0.400950] usbcore: registered new interface driver usbfs [ 0.401012] usbcore: registered new interface driver hub [ 0.401062] usbcore: registered new device driver usb [ 0.401472] mc: Linux media interface: v0.10 [ 0.401502] videodev: Linux video capture interface: v2.00 [ 0.401803] pps_core: LinuxPPS API ver. 1 registered [ 0.401814] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401835] PTP clock support registered [ 0.402034] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.402359] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.402411] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.403195] Registered efivars operations [ 0.408907] FPGA manager framework [ 0.409045] Advanced Linux Sound Architecture Driver Initialized. [ 0.409654] Bluetooth: Core ver 2.22 [ 0.409690] NET: Registered protocol family 31 [ 0.409702] Bluetooth: HCI device and connection manager initialized [ 0.409718] Bluetooth: HCI socket layer initialized [ 0.409733] Bluetooth: L2CAP socket layer initialized [ 0.409753] Bluetooth: SCO socket layer initialized [ 0.412114] camchar: rtcpu character device driver loaded [ 0.413210] clocksource: Switched to clocksource arch_sys_counter [ 0.825581] VFS: Disk quotas dquot_6.6.0 [ 0.825666] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.826159] pnp: PnP ACPI: disabled [ 0.841112] la/ptsa driver initialized. [ 0.841327] NET: Registered protocol family 2 [ 0.841566] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.849916] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.850120] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.850491] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.851123] TCP: Hash tables configured (established 65536 bind 65536) [ 0.851301] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.851443] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.851725] NET: Registered protocol family 1 [ 0.852570] RPC: Registered named UNIX socket transport module. [ 0.852591] RPC: Registered udp transport module. [ 0.852602] RPC: Registered tcp transport module. [ 0.852613] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.852648] PCI: CLS 0 bytes, default 64 [ 0.852892] Trying to unpack rootfs image as initramfs... [ 1.037843] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.039990] Freeing initrd memory: 8196K [ 1.043479] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.043528] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.043556] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.043916] kvm [1]: IPA Size Limit: 40 bits [ 1.044426] kvm [1]: vgic interrupt IRQ9 [ 1.044868] kvm [1]: VHE mode initialized successfully [ 1.046116] Initialise system trusted keyrings [ 1.046409] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.050744] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.051426] NFS: Registering the id_resolver key type [ 1.051453] Key type id_resolver registered [ 1.051463] Key type id_legacy registered [ 1.051519] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.051539] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.051565] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.060092] NET: Registered protocol family 38 [ 1.060139] Key type asymmetric registered [ 1.060151] Asymmetric key parser 'x509' registered [ 1.060200] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.060402] io scheduler mq-deadline registered [ 1.060416] io scheduler kyber registered [ 1.064877] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.067109] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.067168] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.067219] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.067267] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.067314] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.071524] scrncapt: init (heads:4 wins:6 planes:4) [ 1.071566] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.072380] EINJ: ACPI disabled. [ 1.074730] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.074750] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.074760] tegra-pmc: ### PMC reset level: L1 [ 1.074770] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.074824] tegra-pmc: PMC Prod config success [ 1.079227] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.083231] random: fast init done [ 1.083415] printk: console [ttyTCU0] enabled [ 2.635440] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.640375] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.644939] arm-smmu 10000000.iommu: stage 1 translation [ 2.650530] arm-smmu 10000000.iommu: stage 2 translation [ 2.656188] arm-smmu 10000000.iommu: nested translation [ 2.661522] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.668437] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.677788] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.681836] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.688380] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.695869] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.701161] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.705904] arm-smmu 12000000.iommu: stage 1 translation [ 2.711656] arm-smmu 12000000.iommu: stage 2 translation [ 2.717102] arm-smmu 12000000.iommu: nested translation [ 2.722255] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.729426] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.738993] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.742809] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.749107] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.756641] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.766477] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.769483] tegra_profiler: auth: init [ 2.773663] THERMAL EST: found 3 subdevs [ 2.777459] THERMAL EST num_resources: 0 [ 2.781029] [THERMAL EST subdev 0] [ 2.784372] [THERMAL EST subdev 1] [ 2.788037] [THERMAL EST subdev 2] [ 2.791025] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.797666] THERMAL EST: thz register success. [ 2.801975] THERMAL EST: end of probe, return err: 0 [ 2.807184] nvsciipc: loaded module [ 2.813497] tun: Universal TUN/TAP device driver, 1.6 [ 2.816568] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.822849] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.828653] e1000e: Intel(R) PRO/1000 Network Driver [ 2.833546] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.839392] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.844913] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.851045] PPP generic driver version 2.4.2 [ 2.855333] PPP BSD Compression module registered [ 2.859888] PPP Deflate Compression module registered [ 2.865151] PPP MPPE Compression module registered [ 2.869904] usbcore: registered new interface driver r8152 [ 2.875396] usbcore: registered new interface driver asix [ 2.880730] usbcore: registered new interface driver ax88179_178a [ 2.887112] usbcore: registered new interface driver cdc_ether [ 2.893060] usbcore: registered new interface driver net1080 [ 2.898399] usbcore: registered new interface driver cdc_subset [ 2.904720] usbcore: registered new interface driver zaurus [ 2.910392] usbcore: registered new interface driver cdc_ncm [ 2.915821] usbcore: registered new interface driver aqc111 [ 2.921476] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.927539] ohci-pci: OHCI PCI platform driver [ 2.932098] ohci-platform: OHCI generic platform driver [ 2.937638] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.943849] usbcore: registered new interface driver uas [ 2.948145] usbcore: registered new interface driver usb-storage [ 2.954505] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.960164] mousedev: PS/2 mouse device common for all mice [ 2.965555] usbcore: registered new interface driver xpad [ 2.973148] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.976293] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.983814] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.990540] i2c /dev entries driver [ 2.993669] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.999351] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.004717] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.010191] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.015740] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.020991] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.026472] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.037662] device-mapper: uevent: version 1.0.3 [ 3.038033] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.046867] cpuidle: Initializing cpuidle driver [ 3.050846] sdhci: Secure Digital Host Controller Interface driver [ 3.055631] sdhci: Copyright(c) Pierre Ossman [ 3.059737] Synopsys Designware Multimedia Card Interface Driver [ 3.066143] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.071822] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.072393] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.085023] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.103368] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.112322] vdd-1v0: supplied by regulator-dummy [ 3.117680] vdd-1v8-hs: supplied by regulator-dummy [ 3.122409] vdd-1v8-ls: supplied by regulator-dummy [ 3.127096] vdd-1v8-ao: supplied by regulator-dummy [ 3.130846] vddio-ddr-1v1: supplied by regulator-dummy [ 3.135168] vdd-rtc: supplied by regulator-dummy [ 3.136831] spmic-ldo1: supplied by regulator-dummy [ 3.138010] vdd-ao-3v3: supplied by regulator-dummy [ 3.143997] vddio-emmc-3v3: supplied by regulator-dummy [ 3.150149] spmic-ldo4: supplied by regulator-dummy [ 3.151293] vdd-usb-3v3: supplied by regulator-dummy [ 3.157274] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.163325] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.168689] spmic-ldo8: supplied by vdd-1v8-ls [ 3.170056] gpio-510 (gpio_default): hogged as output/high [ 3.172158] gpio-511 (gpio_default): hogged as output/high [ 3.178902] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.317399] max77686-rtc max77620-rtc: registered as rtc0 [ 3.318334] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.318612] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.040098] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.041073] hid: raw HID events driver (C) Jiri Kosina [ 4.041692] usbcore: registered new interface driver usbhid [ 4.041824] usbhid: USB HID core driver [ 4.043469] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.044787] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.062668] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.138116] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 76.256 ms) ÿá[ 4.130032] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.130525] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.131482] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.132139] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.134161] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.134757] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.135283] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.136637] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.136859] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.139099] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.146998] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.152625] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.158301] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.163960] denver_knobs_init:MTS_VERSION:55637613 [ 4.175948] t19x_cache tegra-cache: probed [ 4.178298] optee: probing for conduit method. [ 4.179080] optee: revision 3.16 (65cc2218) [ 4.179991] optee: dynamic shared memory is enabled [ 4.185073] optee: initialized driver [ 4.191297] nvpmodel: initialized successfully [ 4.192746] tegra_hv: get_hvd: not initialized yet [ 4.197319] user_ivc_mempool: hypervisor not present [ 4.203537] usbcore: registered new interface driver snd-usb-audio [ 4.209965] u32 classifier [ 4.210909] input device check on [ 4.214649] Actions configured [ 4.218500] Initializing XFRM netlink socket [ 4.223423] NET: Registered protocol family 10 [ 4.230101] Segment Routing with IPv6 [ 4.230772] NET: Registered protocol family 17 [ 4.235041] NET: Registered protocol family 15 [ 4.239180] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.252767] Bluetooth: RFCOMM socket layer initialized [ 4.257485] Bluetooth: RFCOMM ver 1.11 [ 4.261605] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.267467] Bluetooth: HIDP socket layer initialized [ 4.272934] 9pnet: Installing 9P2000 support [ 4.276696] Key type dns_resolver registered [ 4.282340] registered taskstats version 1 [ 4.285107] Loading compiled-in X.509 certificates [ 4.297545] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.300867] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.311077] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.313377] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.321853] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.329997] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.445260] tegra194-pcie 14160000.pcie: Link up [ 4.447979] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.448227] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.448373] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.448617] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.448813] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.449174] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.449690] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.458996] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.459601] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.460089] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.461723] pci 0004:01:00.0: supports D1 D2 [ 4.461905] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.470748] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.471080] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.471320] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.471672] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.471914] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.473730] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.480087] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.487531] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.495970] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.506163] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.510398] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.516204] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.522838] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.532266] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.533988] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.542405] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.550843] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.665743] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.666294] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.666501] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.666645] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.666916] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.667137] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.667523] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.667923] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.682382] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.682760] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.684317] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.685600] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.686909] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.688191] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.689029] pci 0005:00:00.0: Removing from iommu group 7 [ 5.689440] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.718565] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.738843] host1x 13e10000.host1x: initialized [ 5.740306] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.741464] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.742651] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.743293] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.744268] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.744898] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.745988] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.748884] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.758920] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.765813] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.775635] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.782592] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.792517] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.799785] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.809504] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.816837] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.826744] falcon 15340000.vic: Adding to iommu group 17 [ 5.840580] falcon 15340000.vic: initialized [ 5.841601] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.846765] falcon 15380000.nvjpg: initialized [ 5.847410] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.859287] falcon 154c0000.nvenc: initialized [ 5.859811] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.869367] falcon 15a80000.nvenc1: initialized [ 5.869956] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.882714] nvdec 15480000.nvdec: initialized [ 5.883296] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.892487] nvdec 15140000.nvdec1: initialized [ 5.893046] tsec 15500000.tsec: Adding to iommu group 18 [ 5.898203] tsec 15500000.tsec: initialized [ 5.898654] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.906713] tsec 15100000.tsecb: initialized [ 5.910306] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.936277] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.947867] gpio-374 (wifi-enable): hogged as output/high [ 5.948158] gpio-431 (camera-control-output-low): hogged as output/low [ 5.948512] gpio-432 (camera-control-output-low): hogged as output/low [ 5.950271] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.951882] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.952431] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.957642] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.963257] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.968847] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.974818] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.982827] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.990483] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.002292] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.007096] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.012992] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.021613] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.030772] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.038476] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.045674] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.052166] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.061523] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.067797] pva 16000000.pva0: Adding to iommu group 22 [ 6.093969] pva 16000000.pva0: initialized [ 6.098466] pva 16800000.pva1: Adding to iommu group 23 [ 6.109737] pva 16800000.pva1: initialized [ 6.113832] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.126045] nvdla 15880000.nvdla0: initialized [ 6.127319] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.136742] nvdla 158c0000.nvdla1: initialized [ 6.139632] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.139690] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.139956] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.140156] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.140696] tegradccommon 15200000.display-hub: dma mapping done [ 6.140788] tegradc 15200000.display: Adding to iommu group 26 [ 6.141613] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.142193] tegradc 15210000.display: Adding to iommu group 26 [ 6.149655] tegradc 15210000.display: disp0 connected to head1->sor [ 6.152266] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.157841] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.163684] tegra_cec 3960000.tegra_cec: probed [ 6.170067] tegradc 15210000.display: DT parsed successfully [ 6.177400] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.181090] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.187070] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.193479] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.201824] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.206992] generic_infoframe_type: 0x87 [ 6.213519] kfuse 3830000.kfuse: initialized [ 6.219880] tegradc 15200000.display: DT parsed successfully [ 6.224295] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.227932] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.233522] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.234141] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.261291] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.269057] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.277538] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.285334] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.295217] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.295543] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.300218] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.306675] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.321287] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.321788] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.338535] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.347465] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.354915] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.359244] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.370180] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.375734] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.383969] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.392718] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.398981] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.406977] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.414195] usb usb1: Product: xHCI Host Controller [ 6.418851] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.425035] usb usb1: SerialNumber: 3610000.xhci [ 6.430574] hub 1-0:1.0: USB hub found [ 6.433674] hub 1-0:1.0: 4 ports detected [ 6.438483] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.443021] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.450904] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.458636] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.466481] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.473689] usb usb2: Product: xHCI Host Controller [ 6.478514] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.484885] usb usb2: SerialNumber: 3610000.xhci [ 6.490390] hub 2-0:1.0: USB hub found [ 6.493430] hub 2-0:1.0: 4 ports detected [ 6.531207] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.536434] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.537846] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.538097] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.551088] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.552101] tegra194-cpufreq ccplex: probed with BWMGR [ 6.553444] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.554105] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.554561] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.555726] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.567769] tegra194-vi5 15c10000.vi: initialized [ 6.568881] mmc0: CQHCI version 5.10 [ 6.569240] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.570283] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.570478] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.570483] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.570489] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.570494] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.570497] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.581287] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.583409] generic_infoframe_type: 0x87 [ 6.591543] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.597693] tegradc 15200000.display: DT parsed successfully [ 6.604700] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.610072] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.610821] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.618597] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.624674] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.634763] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.640450] nvethernet 2490000.ethernet: Macsec not supported [ 6.647098] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.647459] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.656286] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.662768] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.662943] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.671334] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.696481] mmc0: Command Queue Engine enabled [ 6.697247] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.700915] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.701602] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.701606] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.703817] tegradc 15200000.display: probed [ 6.706684] mmc0: periodic cache flush enabled [ 6.706701] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.707300] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.714828] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.721122] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.734509] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.752555] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.757637] tegra-se-nvhost 15810000.se: initialized [ 6.824888] Console: switching to colour frame buffer device 240x67 [ 6.829681] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.830798] tegradc 15200000.display: fb registered [ 6.837362] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.841872] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.848863] tegra-se-nvhost 15820000.se: initialized [ 6.854316] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.860021] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.864405] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.864454] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.864459] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.864463] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.864467] usb 1-2: Manufacturer: Generic [ 6.866378] hub 1-2:1.0: USB hub found [ 6.867418] hub 1-2:1.0: 4 ports detected [ 6.870993] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.915701] tegra-se-nvhost 15830000.se: initialized [ 6.921326] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.926859] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.933567] tegra-se-nvhost 15840000.se: initialized [ 6.935998] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.939307] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.947548] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.954268] tegra_actmon d230000.actmon: in actmon_register()... [ 6.960442] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.961077] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.966297] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.973998] Extcon AUX1(HDMI) enable [ 6.974143] tegradc 15210000.display: disp1 connected to head1->sor [ 6.981575] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.982212] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.986644] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.990958] hvc_sysfs: hypervisor is not present [ 6.996393] tegradc 15210000.display: DT parsed successfully [ 7.019135] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.023729] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.029148] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.029157] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.029786] ALSA device list: [ 7.029792] No soundcards found. [ 7.037927] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.045831] usb 2-3: Manufacturer: Generic [ 7.056654] hub 2-3:1.0: USB hub found [ 7.057735] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.064342] tegradc 15210000.display: probed [ 7.072386] hub 2-3:1.0: 4 ports detected [ 7.093585] tegradc 15210000.display: fb registered [ 7.096984] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.100025] Freeing unused kernel memory: 3968K [ 7.105350] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.105364] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.123225] tegradc 15200000.display: blank - powerdown [ 7.129306] Run /init as init process [ 7.153228] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.169712] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.169716] Extcon AUX1(HDMI) disable [ 7.193035] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.193900] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.206813] tegradc 15200000.display: unblank [ 7.207849] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.208040] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.213809] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.215711] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.219678] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.219681] Extcon AUX1(HDMI) enable [ 7.232470] tegradc 15200000.display: sync windows ret = 247 [ 7.233261] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.260045] tegradc 15210000.display: blank - powerdown [ 7.261664] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.261667] Extcon DP: HPD disabled [ 7.261671] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.261684] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.261688] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.273583] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.280629] Extcon HDMI: HPD enabled [ 7.284321] tegradc 15200000.display: hdmi: plugged [ 7.302609] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.304163] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.305695] usb 1-3: Product: Bluetooth Radio [ 7.309050] usb 1-3: Manufacturer: Realtek [ 7.312595] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.313273] usb 1-3: SerialNumber: 00e04c000001 [ 7.323479] Root device found: mmcblk0p1 [ 7.324830] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.330685] Found dev node: /dev/mmcblk0p1 [ 7.372357] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.377677] Rootfs mounted over mmcblk0p1 [ 7.406359] Switching from initrd to actual rootfs [ 7.476625] random: crng init done [ 7.549068] systemd[1]: System time before build time, advancing clock. [ 7.617409] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.622472] systemd[1]: Detected architecture arm64. [ 7.659566] systemd[1]: Set hostname to . [ 7.823516] systemd-sysv-generator[250]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.169272] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.171099] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.176617] systemd[1]: Created slice system-modprobe.slice. [ 8.181509] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.185911] systemd[1]: Created slice User and Session Slice. [ 8.189562] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.194123] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.199474] systemd[1]: Reached target User and Group Name Lookups. [ 8.205341] systemd[1]: Reached target Slices. [ 8.211173] systemd[1]: Reached target Swap. [ 8.217944] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.221775] systemd[1]: Listening on Syslog Socket. [ 8.225474] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.228987] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.233403] systemd[1]: Listening on Journal Audit Socket. [ 8.237175] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.241280] systemd[1]: Listening on Journal Socket. [ 8.246152] systemd[1]: Listening on udev Control Socket. [ 8.252318] systemd[1]: Listening on udev Kernel Socket. [ 8.260767] systemd[1]: Mounting Huge Pages File System... [ 8.269123] systemd[1]: Mounting POSIX Message Queue File System... [ 8.277231] systemd[1]: Mounting RPC Pipe File System... [ 8.285780] systemd[1]: Mounting Kernel Debug File System... [ 8.294129] systemd[1]: Mounting Kernel Trace File System... [ 8.303953] systemd[1]: Starting Journal Service... [ 8.312921] systemd[1]: Starting Set the console keyboard layout... [ 8.321002] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.324699] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.331071] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.340456] systemd[1]: Started Nameserver information manager. [ 8.345349] systemd[1]: Reached target Network (Pre). [ 8.352153] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.354151] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.360297] systemd[1]: Starting Load Kernel Modules... [ 8.368433] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.376784] systemd[1]: Starting udev Coldplug all Devices... [ 8.387855] systemd[1]: Mounted Huge Pages File System. [ 8.391779] systemd[1]: Mounted POSIX Message Queue File System. [ 8.395401] systemd[1]: Mounted RPC Pipe File System. [ 8.399202] systemd[1]: Mounted Kernel Debug File System. [ 8.399948] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.401116] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.402115] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.406504] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.406521] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.406525] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.406770] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.409467] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.414231] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.414247] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.422123] systemd[1]: Mounted Kernel Trace File System. [ 8.428164] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.433135] systemd[1]: nvfb-udev.service: Succeeded. [ 8.436924] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.446922] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.458607] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.460394] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.467418] systemd[1]: Starting Load/Save Random Seed... [ 8.475311] systemd[1]: Starting Create System Users... [ 8.513665] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.513665] [ 8.530521] systemd[1]: Finished Load/Save Random Seed. [ 8.541798] systemd[1]: Finished Load Kernel Modules. [ 8.546782] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.553149] systemd[1]: Mounting Kernel Configuration File System... [ 8.561624] systemd[1]: Started OP-TEE Client Supplicant. [ 8.569961] systemd[1]: Starting Apply Kernel Variables... [ 8.580312] systemd[1]: Finished Set the console keyboard layout. [ 8.584636] systemd[1]: Mounted Kernel Configuration File System. [ 8.595340] systemd[1]: Finished Create System Users. [ 10.114275] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.119638] imx219 9-0010: board setup failed [ 10.119729] imx219: probe of 9-0010 failed with error -121 [ 10.132457] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.137014] hot-surface-alert cooling state: 0 -> 1 [ 10.139603] imx219 10-0010: board setup failed [ 10.141700] imx219: probe of 10-0010 failed with error -121 [ 10.409786] using random self ethernet address [ 10.441267] using random host ethernet address [ 11.875343] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.877142] Creating 1 MTD partitions on "spi6.0": [ 11.879831] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.191258] using random self ethernet address [ 12.192954] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.868728] nvidia: loading out-of-tree module taints kernel. [ 58.431083] watchdog: watchdog0: watchdog did not stop! [ 58.903029] Trying to unregister non-registered hwtime source [ 61.960550] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.962704] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr bÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.211] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.486] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.609] W> set volts not configured for 'vdd-1v0' [0003.616] W> set volts not configured for 'vdd-1v8-hs' [0003.616] I> retrieved tmds range from prod_list_hdmi_soc [0003.623] E> invalid display type [0003.624] E> cannot find any other nvdisp nodes [0003.640] I> edid read success [0003.652] I> edid read success [0003.653] I> width = 640, height = 480, frequency = 25174825 [0003.653] I> width = 1920, height = 1080, frequency = 148500000 [0003.653] I> width = 1280, height = 768, frequency = 79500000 [0003.654] I> width = 1360, height = 768, frequency = 85500000 [0003.654] I> width = 720, height = 480, frequency = 26973026 [0003.658] I> width = 720, height = 576, frequency = 26973026 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1280, height = 720, frequency = 74175824 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.681] I> width = 1920, height = 1080, frequency = 148351648 [0003.686] I> width = 720, height = 480, frequency = 26973026 [0003.692] I> width = 720, height = 576, frequency = 26973026 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 3840, height = 2160, frequency = 296703296 [0003.721] I> width = 4096, height = 2160, frequency = 296703296 [0003.726] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.738] I> hdmi_enable, starting HDMI initialisation [0003.742] I> hdmi_enable, HDMI initialisation complete [0003.751] initializing target [0003.752] calling apps_init() [0003.753] starting app kernel_boot_app [0003.754] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000665] Console: colour dummy device 80x25 [ 0.002059] printk: console [tty0] enabled [ 0.002119] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002154] pid_max: default: 32768 minimum: 301 [ 0.002322] LSM: Security Framework initializing [ 0.002380] Yama: becoming mindful. [ 0.002421] SELinux: Initializing. [ 0.002565] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002601] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005416] rcu: Hierarchical SRCU implementation. [ 0.005656] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006329] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006378] DTB Build time: Aug 10 2022 20:31:49 [ 0.009112] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009341] Remapping and enabling EFI services. [ 0.011328] smp: Bringing up secondary CPUs ... [ 0.041870] Detected PIPT I-cache on CPU1 [ 0.041971] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071522] Detected PIPT I-cache on CPU2 [ 0.071677] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101337] Detected PIPT I-cache on CPU3 [ 0.101430] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131883] Detected PIPT I-cache on CPU4 [ 0.131988] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161844] Detected PIPT I-cache on CPU5 [ 0.161945] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162297] smp: Brought up 1 node, 6 CPUs [ 0.162513] SMP: Total of 6 processors activated. [ 0.162582] CPU features: detected: Privileged Access Never [ 0.162608] CPU features: detected: LSE atomic instructions [ 0.162622] CPU features: detected: User Access Override [ 0.162636] CPU features: detected: 32-bit EL0 Support [ 0.162649] CPU features: detected: RAS Extension Support [ 0.162661] CPU features: detected: CRC32 instructions [ 0.162675] CPU features: detected: 32-bit EL1 Support [ 0.230866] CPU: All CPU(s) started at EL2 [ 0.237558] devtmpfs: initialized [ 0.288457] Registered cp15_barrier emulation handler [ 0.288588] Registered setend emulation handler [ 0.288616] KASLR enabled [ 0.288883] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288907] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290344] pinctrl core: initialized pinctrl subsystem [ 0.291295] SMBIOS 3.0.0 present. [ 0.291324] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291979] NET: Registered protocol family 16 [ 0.293952] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.294486] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295179] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295233] audit: initializing netlink subsys (disabled) [ 0.295468] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.295875] thermal_sys: Registered thermal governor 'step_wise' [ 0.295882] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295900] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298161] cpuidle: using governor menu [ 0.298609] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299060] ASID allocator initialised with 32768 entries [ 0.299318] Serial: AMBA PL011 UART driver [ 0.303103] Tegra reboot handler registered. [ 0.371418] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.371582] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.371789] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.371841] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.371969] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.372017] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.372138] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.372185] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372346] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372398] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.374863] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.374901] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.374931] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.374981] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.375013] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375059] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.375096] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375132] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375160] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375185] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.375210] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.375235] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.375259] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.375284] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.375309] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.375334] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.375361] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.375459] mc-err: mcerr ops are set to t19x [ 0.387844] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.387885] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.387901] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.387913] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.395158] ACPI: Interpreter disabled. [ 0.396315] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.397599] iommu: Default domain type: Translated [ 0.397679] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.398051] SCSI subsystem initialized [ 0.398232] usbcore: registered new interface driver usbfs [ 0.398272] usbcore: registered new interface driver hub [ 0.398305] usbcore: registered new device driver usb [ 0.398634] mc: Linux media interface: v0.10 [ 0.398660] videodev: Linux video capture interface: v2.00 [ 0.398945] pps_core: LinuxPPS API ver. 1 registered [ 0.398957] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.398977] PTP clock support registered [ 0.399179] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.399481] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.399559] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.400067] Registered efivars operations [ 0.406232] FPGA manager framework [ 0.406334] Advanced Linux Sound Architecture Driver Initialized. [ 0.406969] Bluetooth: Core ver 2.22 [ 0.407008] NET: Registered protocol family 31 [ 0.407019] Bluetooth: HCI device and connection manager initialized [ 0.407036] Bluetooth: HCI socket layer initialized [ 0.407051] Bluetooth: L2CAP socket layer initialized [ 0.407071] Bluetooth: SCO socket layer initialized [ 0.408648] camchar: rtcpu character device driver loaded [ 0.409411] clocksource: Switched to clocksource arch_sys_counter [ 0.692658] VFS: Disk quotas dquot_6.6.0 [ 0.692743] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.693082] pnp: PnP ACPI: disabled [ 0.704290] la/ptsa driver initialized. [ 0.704421] NET: Registered protocol family 2 [ 0.704611] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.710815] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.710928] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.711191] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.711626] TCP: Hash tables configured (established 65536 bind 65536) [ 0.711801] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.711893] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.712128] NET: Registered protocol family 1 [ 0.712793] RPC: Registered named UNIX socket transport module. [ 0.712806] RPC: Registered udp transport module. [ 0.712815] RPC: Registered tcp transport module. [ 0.712824] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.712838] PCI: CLS 0 bytes, default 64 [ 0.713036] Trying to unpack rootfs image as initramfs... [ 0.901609] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.903926] Freeing initrd memory: 8196K [ 0.907786] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.907829] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.907867] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.908245] kvm [1]: IPA Size Limit: 40 bits [ 0.908767] kvm [1]: vgic interrupt IRQ9 [ 0.909204] kvm [1]: VHE mode initialized successfully [ 0.910500] Initialise system trusted keyrings [ 0.910722] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.915160] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.915863] NFS: Registering the id_resolver key type [ 0.915889] Key type id_resolver registered [ 0.915898] Key type id_legacy registered [ 0.915957] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.915974] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.916003] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.923609] NET: Registered protocol family 38 [ 0.923627] Key type asymmetric registered [ 0.923638] Asymmetric key parser 'x509' registered [ 0.923674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.923878] io scheduler mq-deadline registered [ 0.923892] io scheduler kyber registered [ 0.928250] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.930438] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.930511] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.930591] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.930644] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.930716] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.934359] scrncapt: init (heads:4 wins:6 planes:4) [ 0.934667] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.935297] EINJ: ACPI disabled. [ 0.937564] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.937584] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.937594] tegra-pmc: ### PMC reset level: L1 [ 0.937604] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.937669] tegra-pmc: PMC Prod config success [ 0.942194] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.946480] random: fast init done [ 0.946566] printk: console [ttyTCU0] enabled [ 2.499271] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.503497] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.508101] arm-smmu 10000000.iommu: stage 1 translation [ 2.513642] arm-smmu 10000000.iommu: stage 2 translation [ 2.519067] arm-smmu 10000000.iommu: nested translation [ 2.524435] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.531834] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.542259] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.544661] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.551258] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.559494] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.564546] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.569013] arm-smmu 12000000.iommu: stage 1 translation [ 2.574536] arm-smmu 12000000.iommu: stage 2 translation [ 2.580206] arm-smmu 12000000.iommu: nested translation [ 2.585416] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.592841] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.603191] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.605711] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.612492] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.619744] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.629695] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.632650] tegra_profiler: auth: init [ 2.637411] THERMAL EST: found 3 subdevs [ 2.640556] THERMAL EST num_resources: 0 [ 2.644169] [THERMAL EST subdev 0] [ 2.647753] [THERMAL EST subdev 1] [ 2.650905] [THERMAL EST subdev 2] [ 2.654437] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.660953] THERMAL EST: thz register success. [ 2.664856] THERMAL EST: end of probe, return err: 0 [ 2.670400] nvsciipc: loaded module [ 2.677348] tun: Universal TUN/TAP device driver, 1.6 [ 2.679864] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.686179] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.691727] e1000e: Intel(R) PRO/1000 Network Driver [ 2.696416] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.702771] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.708038] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.714280] PPP generic driver version 2.4.2 [ 2.718202] PPP BSD Compression module registered [ 2.722758] PPP Deflate Compression module registered [ 2.728008] PPP MPPE Compression module registered [ 2.733311] usbcore: registered new interface driver r8152 [ 2.738525] usbcore: registered new interface driver asix [ 2.744124] usbcore: registered new interface driver ax88179_178a [ 2.750244] usbcore: registered new interface driver cdc_ether [ 2.756198] usbcore: registered new interface driver net1080 [ 2.761790] usbcore: registered new interface driver cdc_subset [ 2.767571] usbcore: registered new interface driver zaurus [ 2.773307] usbcore: registered new interface driver cdc_ncm [ 2.779230] usbcore: registered new interface driver aqc111 [ 2.784862] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.790662] ohci-pci: OHCI PCI platform driver [ 2.795248] ohci-platform: OHCI generic platform driver [ 2.800982] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.807540] usbcore: registered new interface driver uas [ 2.811544] usbcore: registered new interface driver usb-storage [ 2.817781] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.823728] mousedev: PS/2 mouse device common for all mice [ 2.828410] usbcore: registered new interface driver xpad [ 2.836375] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.839188] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.846939] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.853561] i2c /dev entries driver [ 2.856805] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.862730] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.868376] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.873904] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.878695] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.884199] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.889850] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.903927] device-mapper: uevent: version 1.0.3 [ 2.904371] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.910620] cpuidle: Initializing cpuidle driver [ 2.914374] sdhci: Secure Digital Host Controller Interface driver [ 2.919021] sdhci: Copyright(c) Pierre Ossman [ 2.923115] Synopsys Designware Multimedia Card Interface Driver [ 2.929313] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.935300] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.936115] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.948429] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.972727] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.982448] vdd-1v0: supplied by regulator-dummy [ 2.988027] vdd-1v8-hs: supplied by regulator-dummy [ 2.992864] vdd-1v8-ls: supplied by regulator-dummy [ 2.997770] vdd-1v8-ao: supplied by regulator-dummy [ 3.001745] vddio-ddr-1v1: supplied by regulator-dummy [ 3.006300] vdd-rtc: supplied by regulator-dummy [ 3.008075] spmic-ldo1: supplied by regulator-dummy [ 3.009304] vdd-ao-3v3: supplied by regulator-dummy [ 3.015541] vddio-emmc-3v3: supplied by regulator-dummy [ 3.021809] spmic-ldo4: supplied by regulator-dummy [ 3.023072] vdd-usb-3v3: supplied by regulator-dummy [ 3.029274] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.035571] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.041210] spmic-ldo8: supplied by vdd-1v8-ls [ 3.042720] gpio-510 (gpio_default): hogged as output/high [ 3.044077] gpio-511 (gpio_default): hogged as output/high [ 3.047016] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.183013] max77686-rtc max77620-rtc: registered as rtc0 [ 3.184411] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.184748] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.015513] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.016665] hid: raw HID events driver (C) Jiri Kosina [ 4.017608] usbcore: registered new interface driver usbhid [ 4.017757] usbhid: USB HID core driver [ 4.019796] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.021160] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.129474] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.203758] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.093 ms) ÿá[ 4.105641] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.106196] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.107151] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.107969] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.109655] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.110200] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.110869] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.112024] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.112310] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.115317] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.115338] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.117215] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.135446] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.139837] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.146223] denver_knobs_init:MTS_VERSION:55637613 [ 4.158135] t19x_cache tegra-cache: probed [ 4.161039] optee: probing for conduit method. [ 4.161993] optee: revision 3.16 (65cc2218) [ 4.162904] optee: dynamic shared memory is enabled [ 4.167361] optee: initialized driver [ 4.174723] nvpmodel: initialized successfully [ 4.175256] tegra_hv: get_hvd: not initialized yet [ 4.179521] user_ivc_mempool: hypervisor not present [ 4.185319] usbcore: registered new interface driver snd-usb-audio [ 4.191842] u32 classifier [ 4.193156] input device check on [ 4.196923] Actions configured [ 4.200771] Initializing XFRM netlink socket [ 4.205766] NET: Registered protocol family 10 [ 4.212152] Segment Routing with IPv6 [ 4.212753] NET: Registered protocol family 17 [ 4.217418] NET: Registered protocol family 15 [ 4.221456] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.235051] Bluetooth: RFCOMM socket layer initialized [ 4.239722] Bluetooth: RFCOMM ver 1.11 [ 4.243864] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.249460] Bluetooth: HIDP socket layer initialized [ 4.255536] 9pnet: Installing 9P2000 support [ 4.259164] Key type dns_resolver registered [ 4.264249] registered taskstats version 1 [ 4.267431] Loading compiled-in X.509 certificates [ 4.280963] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.283375] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.293379] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.295256] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.304117] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.312479] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.429434] tegra194-pcie 14160000.pcie: Link up [ 4.432536] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.432717] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.432865] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.433122] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.433291] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.433672] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.434140] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.446695] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.447187] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.447639] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.449109] pci 0004:01:00.0: supports D1 D2 [ 4.449350] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.460683] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.460999] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.461284] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.461871] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.462166] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.462412] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.463994] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.471413] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.480192] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.489972] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.494602] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.500338] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.507613] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.516723] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.518230] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.526384] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.535074] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.650601] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.651375] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.651588] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.651776] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.652014] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.652237] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.652616] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.653013] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.668867] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.669133] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.671331] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.672909] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.674153] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.675349] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.676312] pci 0005:00:00.0: Removing from iommu group 7 [ 5.676673] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.712470] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.734349] host1x 13e10000.host1x: initialized [ 5.736152] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.737009] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.738388] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.739080] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.740219] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.740759] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.741938] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.742514] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.743813] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.750872] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.760847] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.767599] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.777464] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.784549] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.794627] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.801763] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.811614] falcon 15340000.vic: Adding to iommu group 17 [ 5.825812] falcon 15340000.vic: initialized [ 5.826786] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.832632] falcon 15380000.nvjpg: initialized [ 5.833319] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.844541] falcon 154c0000.nvenc: initialized [ 5.845096] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.854394] falcon 15a80000.nvenc1: initialized [ 5.854943] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.867198] nvdec 15480000.nvdec: initialized [ 5.867925] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.876730] nvdec 15140000.nvdec1: initialized [ 5.877238] tsec 15500000.tsec: Adding to iommu group 18 [ 5.882475] tsec 15500000.tsec: initialized [ 5.883009] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.892221] tsec 15100000.tsecb: initialized [ 5.895722] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.921972] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.933177] gpio-374 (wifi-enable): hogged as output/high [ 5.933543] gpio-431 (camera-control-output-low): hogged as output/low [ 5.933863] gpio-432 (camera-control-output-low): hogged as output/low [ 5.935867] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.937528] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.938041] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.942846] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.948287] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.953993] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.959285] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.968406] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.975084] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.986985] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.991904] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.997656] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.006739] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.015695] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.022993] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.030728] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.036982] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.046996] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.053030] pva 16000000.pva0: Adding to iommu group 22 [ 6.079840] pva 16000000.pva0: initialized [ 6.084495] pva 16800000.pva1: Adding to iommu group 23 [ 6.096780] pva 16800000.pva1: initialized [ 6.101588] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.114528] nvdla 15880000.nvdla0: initialized [ 6.116154] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.124605] nvdla 158c0000.nvdla1: initialized [ 6.127577] tegradc 15200000.display: Adding to iommu group 26 [ 6.135955] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.136261] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.138109] tegradc 15210000.display: Adding to iommu group 26 [ 6.138577] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.139096] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.139117] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.139277] tegradccommon 15200000.display-hub: dma mapping done [ 6.139894] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.148580] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.153904] tegra_cec 3960000.tegra_cec: probed [ 6.159155] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.166126] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.171221] kfuse 3830000.kfuse: initialized [ 6.175997] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.181737] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.189069] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.194950] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.204641] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.209711] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.219118] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.224429] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.244632] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.244982] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.247862] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.255763] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.264453] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.271207] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.278857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.286018] usb usb1: Product: xHCI Host Controller [ 6.290743] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.297077] usb usb1: SerialNumber: 3610000.xhci [ 6.302904] hub 1-0:1.0: USB hub found [ 6.305630] hub 1-0:1.0: 4 ports detected [ 6.310395] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.314998] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.322880] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.330563] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.338461] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.345684] usb usb2: Product: xHCI Host Controller [ 6.350411] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.356625] usb usb2: SerialNumber: 3610000.xhci [ 6.362116] hub 2-0:1.0: USB hub found [ 6.365065] hub 2-0:1.0: 4 ports detected [ 6.408261] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.414048] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.415337] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.415551] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.428647] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.429766] tegra194-cpufreq ccplex: probed with BWMGR [ 6.430898] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.431354] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.431735] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.433173] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.441467] tegra194-vi5 15c10000.vi: initialized [ 6.442660] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.442833] mmc0: CQHCI version 5.10 [ 6.445320] generic_infoframe_type: 0x87 [ 6.452946] tegradc 15200000.display: DT parsed successfully [ 6.454250] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.458592] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.465430] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.480715] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.487276] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.494203] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.499861] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.500762] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.515247] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.521468] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.523443] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.529866] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.538027] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.552454] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.552506] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.561025] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.565501] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.579403] nvethernet 2490000.ethernet: Macsec not supported [ 6.579827] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.586420] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.595769] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.598888] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.598894] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.601051] tegradc 15200000.display: probed [ 6.605201] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.635917] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.639375] mmc0: Command Queue Engine enabled [ 6.643298] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.647377] mmc0: periodic cache flush enabled [ 6.647410] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.648076] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.655276] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.658851] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.683394] Console: switching to colour frame buffer device 240x67 [ 6.685006] tegra-se-nvhost 15810000.se: initialized [ 6.689319] tegradc 15200000.display: fb registered [ 6.695395] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.699069] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.699251] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.699819] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.700521] tegra-se-nvhost 15820000.se: initialized [ 6.702281] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.702796] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.703528] tegra-se-nvhost 15830000.se: initialized [ 6.704624] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.705155] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.705841] tegra-se-nvhost 15840000.se: initialized [ 6.707321] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.772017] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.772843] random: crng init done [ 6.780878] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.781035] tegra_actmon d230000.actmon: in actmon_register()... [ 6.793166] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.798694] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.806948] hvc_sysfs: hypervisor is not present [ 6.813808] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.819087] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.826001] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.830785] usb 1-2: Manufacturer: Generic [ 6.837063] hub 1-2:1.0: USB hub found [ 6.837548] ALSA device list: [ 6.841999] No soundcards found. [ 6.842035] hub 1-2:1.0: 4 ports detected [ 6.864615] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.865953] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.866154] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.874831] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.881375] Extcon AUX1(HDMI) enable [ 6.885271] tegradc 15210000.display: disp1 connected to head1->sor [ 6.891257] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.898072] tegradc 15210000.display: DT parsed successfully [ 6.904032] tegradc 15210000.display: Display dc.000000000130367c registered with id=1 [ 6.911875] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.917602] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.923940] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.931101] tegradc 15210000.display: probed [ 6.936026] tegradc 15210000.display: fb registered [ 6.944465] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.947983] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.949952] Freeing unused kernel memory: 3968K [ 6.956096] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.966342] tegradc 15210000.display: blank - powerdown [ 6.971204] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.973556] Run /init as init process [ 6.979485] Extcon DP: HPD disabled [ 6.986620] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.993605] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.993610] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.996833] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.014408] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.021988] usb 2-3: Product: 4-Port USB 3.0 Hub ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.026531] usb 2-3: Manufacturer: Generic [ 7.026656] tegradc 15200000.display: blank - powerdown [ 7.037870] hub 2-3:1.0: USB hub found [ 7.039702] hub 2-3:1.0: 4 ports detected [ 7.050567] Root device found: mmcblk0p1 [ 7.052576] Found dev node: /dev/mmcblk0p1 [ 7.064969] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.064973] Extcon AUX1(HDMI) disable [ 7.087875] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.088430] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.089397] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.092031] Rootfs mounted over mmcblk0p1 [ 7.103082] tegradc 15200000.display: unblank [ 7.104284] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.104467] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.110542] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.112402] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.113438] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.116406] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.116410] Extcon AUX1(HDMI) enable [ 7.129153] tegradc 15200000.display: sync windows ret = 247 [ 7.129837] Switching from initrd to actual rootfs [ 7.163271] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.167770] Extcon HDMI: HPD enabled [ 7.171388] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.177409] tegradc 15200000.display: hdmi: plugged [ 7.235951] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.237311] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.262704] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.264033] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.265308] usb 1-3: Product: Bluetooth Radio [ 7.266548] usb 1-3: Manufacturer: Realtek [ 7.267754] usb 1-3: SerialNumber: 00e04c000001 [ 7.310833] systemd[1]: System time before build time, advancing clock. [ 7.380814] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.385706] systemd[1]: Detected architecture arm64. [ 7.425606] systemd[1]: Set hostname to . [ 7.583738] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.932679] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.934393] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.940195] systemd[1]: Created slice system-modprobe.slice. [ 7.944891] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.948967] systemd[1]: Created slice User and Session Slice. [ 7.952405] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.956544] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.960021] systemd[1]: Reached target User and Group Name Lookups. [ 7.963178] systemd[1]: Reached target Slices. [ 7.966265] systemd[1]: Reached target Swap. [ 7.970273] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.973866] systemd[1]: Listening on Syslog Socket. [ 7.977390] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.980726] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.984943] systemd[1]: Listening on Journal Audit Socket. [ 7.988537] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.992342] systemd[1]: Listening on Journal Socket. [ 7.996688] systemd[1]: Listening on udev Control Socket. [ 8.001792] systemd[1]: Listening on udev Kernel Socket. [ 8.010360] systemd[1]: Mounting Huge Pages File System... [ 8.019092] systemd[1]: Mounting POSIX Message Queue File System... [ 8.027377] systemd[1]: Mounting RPC Pipe File System... [ 8.036438] systemd[1]: Mounting Kernel Debug File System... [ 8.045173] systemd[1]: Mounting Kernel Trace File System... [ 8.055192] systemd[1]: Starting Journal Service... [ 8.064294] systemd[1]: Starting Set the console keyboard layout... [ 8.072481] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.076090] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.082347] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.090369] systemd[1]: Started Nameserver information manager. [ 8.094998] systemd[1]: Reached target Network (Pre). [ 8.101627] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.103523] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.111184] systemd[1]: Starting Load Kernel Modules... [ 8.119094] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.127667] systemd[1]: Starting udev Coldplug all Devices... [ 8.139189] systemd[1]: Mounted Huge Pages File System. [ 8.143007] systemd[1]: Mounted POSIX Message Queue File System. [ 8.146857] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.151585] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.151784] systemd[1]: Mounted RPC Pipe File System. [ 8.154013] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.156166] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.156178] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.156182] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.156370] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.156595] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.156759] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.156768] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.168835] systemd[1]: Mounted Kernel Debug File System. [ 8.172715] systemd[1]: Mounted Kernel Trace File System. [ 8.179902] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.186389] systemd[1]: nvfb-udev.service: Succeeded. [ 8.191057] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.203396] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.215949] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.218501] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.226315] systemd[1]: Starting Load/Save Random Seed... [ 8.234608] systemd[1]: Starting Create System Users... [ 8.240574] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.240574] [ 8.277138] systemd[1]: Finished Load Kernel Modules. [ 8.282151] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.289084] systemd[1]: Mounting Kernel Configuration File System... [ 8.298304] systemd[1]: Started OP-TEE Client Supplicant. [ 8.306609] systemd[1]: Starting Apply Kernel Variables... [ 8.317972] systemd[1]: Finished Load/Save Random Seed. [ 8.322252] systemd[1]: Mounted Kernel Configuration File System. [ 8.333669] systemd[1]: Finished Create System Users. [ 9.789643] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.796989] imx219 9-0010: board setup failed [ 9.798320] imx219: probe of 9-0010 failed with error -121 [ 9.813815] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.819000] imx219 10-0010: board setup failed [ 9.820277] imx219: probe of 10-0010 failed with error -121 [ 9.851322] hot-surface-alert cooling state: 0 -> 1 [ 10.669621] using random self ethernet address [ 10.681467] using random host ethernet address [ 11.474646] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.474653] Creating 1 MTD partitions on "spi6.0": [ 11.474661] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.052058] using random self ethernet address [ 12.079717] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.819892] nvidia: loading out-of-tree module taints kernel. [ 59.051406] watchdog: watchdog0: watchdog did not stop! [ 59.498244] Trying to unregister non-registered hwtime source [ 62.560504] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.562566] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0üÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNIÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäNG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.211] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.263] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.321] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.330] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.379] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.388] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.417] initializing threads [0003.420] initializing timers [0003.422] creating bootstrap completion thread [0003.427] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.493] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.494] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.607] I> regulator 'vdd-hdmi-5v0' already enabled [0003.607] I> hdmi cable connected [0003.614] W> set volts not configured for 'vdd-1v0' [0003.620] W> set volts not configured for 'vdd-1v8-hs' [0003.621] I> retrieved tmds range from prod_list_hdmi_soc [0003.627] E> invalid display type [0003.628] E> cannot find any other nvdisp nodes [0003.645] I> edid read success [0003.657] I> edid read success [0003.657] I> width = 640, height = 480, frequency = 25174825 [0003.658] I> width = 1920, height = 1080, frequency = 148500000 [0003.658] I> width = 1280, height = 768, frequency = 79500000 [0003.659] I> width = 1360, height = 768, frequency = 85500000 [0003.659] I> width = 720, height = 480, frequency = 26973026 [0003.663] I> width = 720, height = 576, frequency = 26973026 [0003.669] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1280, height = 720, frequency = 74175824 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.686] I> width = 1920, height = 1080, frequency = 148351648 [0003.691] I> width = 720, height = 480, frequency = 26973026 [0003.697] I> width = 720, height = 576, frequency = 26973026 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 3840, height = 2160, frequency = 296703296 [0003.725] I> width = 4096, height = 2160, frequency = 296703296 [0003.731] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.742] I> hdmi_enable, starting HDMI initialisation [0003.747] I> hdmi_enable, HDMI initialisation complete [0003.757] initializing target [0003.757] calling apps_init() [0003.758] starting app kernel_boot_app [0003.759] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000745] Console: colour dummy device 80x25 [ 0.002045] printk: console [tty0] enabled [ 0.002104] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002139] pid_max: default: 32768 minimum: 301 [ 0.002376] LSM: Security Framework initializing [ 0.002434] Yama: becoming mindful. [ 0.002475] SELinux: Initializing. [ 0.002621] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002658] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005477] rcu: Hierarchical SRCU implementation. [ 0.005714] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006669] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006717] DTB Build time: Aug 10 2022 20:31:49 [ 0.010180] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010495] Remapping and enabling EFI services. [ 0.012572] smp: Bringing up secondary CPUs ... [ 0.041672] Detected PIPT I-cache on CPU1 [ 0.041747] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071423] Detected PIPT I-cache on CPU2 [ 0.071581] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101329] Detected PIPT I-cache on CPU3 [ 0.101479] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131139] Detected PIPT I-cache on CPU4 [ 0.131411] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161211] Detected PIPT I-cache on CPU5 [ 0.161362] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161677] smp: Brought up 1 node, 6 CPUs [ 0.161895] SMP: Total of 6 processors activated. [ 0.161974] CPU features: detected: Privileged Access Never [ 0.162004] CPU features: detected: LSE atomic instructions [ 0.162022] CPU features: detected: User Access Override [ 0.162056] CPU features: detected: 32-bit EL0 Support [ 0.162083] CPU features: detected: RAS Extension Support [ 0.162100] CPU features: detected: CRC32 instructions [ 0.162132] CPU features: detected: 32-bit EL1 Support [ 0.228941] CPU: All CPU(s) started at EL2 [ 0.233979] devtmpfs: initialized [ 0.279439] Registered cp15_barrier emulation handler [ 0.279579] Registered setend emulation handler [ 0.279599] KASLR enabled [ 0.279884] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.279907] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.281222] pinctrl core: initialized pinctrl subsystem [ 0.282184] SMBIOS 3.0.0 present. [ 0.282213] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.282862] NET: Registered protocol family 16 [ 0.285087] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.285584] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.286290] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.286349] audit: initializing netlink subsys (disabled) [ 0.286640] audit: type=2000 audit(0.284:1): state=initialized audit_enabled=0 res=1 [ 0.287035] thermal_sys: Registered thermal governor 'step_wise' [ 0.287042] thermal_sys: Registered thermal governor 'power_allocator' [ 0.287061] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.289197] cpuidle: using governor menu [ 0.289720] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.290255] ASID allocator initialised with 32768 entries [ 0.290482] Serial: AMBA PL011 UART driver [ 0.294791] Tegra reboot handler registered. [ 0.369115] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.369229] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.369421] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.369502] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.369618] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.369665] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.369776] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.369821] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.369931] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.369977] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.372408] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.372458] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.372490] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.372517] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.372546] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.372572] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.372598] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.372623] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.372649] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.372674] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.372701] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.372726] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.372754] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.372780] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.372805] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.372830] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.372855] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.372944] mc-err: mcerr ops are set to t19x [ 0.386017] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.386044] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.386059] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.386073] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.392518] ACPI: Interpreter disabled. [ 0.393819] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.395269] iommu: Default domain type: Translated [ 0.395335] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.395695] SCSI subsystem initialized [ 0.395855] usbcore: registered new interface driver usbfs [ 0.395900] usbcore: registered new interface driver hub [ 0.395936] usbcore: registered new device driver usb [ 0.396353] mc: Linux media interface: v0.10 [ 0.396390] videodev: Linux video capture interface: v2.00 [ 0.396722] pps_core: LinuxPPS API ver. 1 registered [ 0.396736] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.396770] PTP clock support registered [ 0.396989] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.397314] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.397440] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.398175] Registered efivars operations [ 0.404214] FPGA manager framework [ 0.404319] Advanced Linux Sound Architecture Driver Initialized. [ 0.404905] Bluetooth: Core ver 2.22 [ 0.404944] NET: Registered protocol family 31 [ 0.404975] Bluetooth: HCI device and connection manager initialized [ 0.404992] Bluetooth: HCI socket layer initialized [ 0.405007] Bluetooth: L2CAP socket layer initialized [ 0.405029] Bluetooth: SCO socket layer initialized [ 0.406692] camchar: rtcpu character device driver loaded [ 0.407676] clocksource: Switched to clocksource arch_sys_counter [ 0.747575] VFS: Disk quotas dquot_6.6.0 [ 0.747644] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.748056] pnp: PnP ACPI: disabled [ 0.760863] la/ptsa driver initialized. [ 0.761016] NET: Registered protocol family 2 [ 0.761200] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.766426] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.766561] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.766811] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.767245] TCP: Hash tables configured (established 65536 bind 65536) [ 0.767363] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.767473] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.767705] NET: Registered protocol family 1 [ 0.768290] RPC: Registered named UNIX socket transport module. [ 0.768308] RPC: Registered udp transport module. [ 0.768317] RPC: Registered tcp transport module. [ 0.768326] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.768351] PCI: CLS 0 bytes, default 64 [ 0.768575] Trying to unpack rootfs image as initramfs... [ 0.968950] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.971179] Freeing initrd memory: 8196K [ 0.975324] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.975366] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.975402] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.975880] kvm [1]: IPA Size Limit: 40 bits [ 0.976528] kvm [1]: vgic interrupt IRQ9 [ 0.977163] kvm [1]: VHE mode initialized successfully [ 0.979041] Initialise system trusted keyrings [ 0.979454] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.986530] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.987413] NFS: Registering the id_resolver key type [ 0.987459] Key type id_resolver registered [ 0.987475] Key type id_legacy registered [ 0.987617] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.987644] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.987736] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.000187] NET: Registered protocol family 38 [ 1.000214] Key type asymmetric registered [ 1.000230] Asymmetric key parser 'x509' registered [ 1.000301] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.000565] io scheduler mq-deadline registered [ 1.000586] io scheduler kyber registered [ 1.006827] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.010106] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.010192] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.010268] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.010340] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.010412] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.015832] scrncapt: init (heads:4 wins:6 planes:4) [ 1.015976] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.016956] EINJ: ACPI disabled. [ 1.020166] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.020192] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.020230] tegra-pmc: ### PMC reset level: L1 [ 1.020246] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.020303] tegra-pmc: PMC Prod config success [ 1.026477] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.070569] random: fast init done [ 1.074836] printk: console [ttyTCU0] enabled [ 2.584568] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.588404] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.593025] arm-smmu 10000000.iommu: stage 1 translation [ 2.598694] arm-smmu 10000000.iommu: stage 2 translation [ 2.603933] arm-smmu 10000000.iommu: nested translation [ 2.609535] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.616717] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.628243] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.629552] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.636137] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.644126] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.649174] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.653900] arm-smmu 12000000.iommu: stage 1 translation [ 2.659410] arm-smmu 12000000.iommu: stage 2 translation [ 2.665101] arm-smmu 12000000.iommu: nested translation [ 2.670268] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.677442] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.689363] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.690541] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.697124] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.704665] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.714655] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.717567] tegra_profiler: auth: init [ 2.722062] THERMAL EST: found 3 subdevs [ 2.725477] THERMAL EST num_resources: 0 [ 2.729062] [THERMAL EST subdev 0] [ 2.732386] [THERMAL EST subdev 1] [ 2.736054] [THERMAL EST subdev 2] [ 2.739282] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.745508] THERMAL EST: thz register success. [ 2.750004] THERMAL EST: end of probe, return err: 0 [ 2.755339] nvsciipc: loaded module [ 2.762505] tun: Universal TUN/TAP device driver, 1.6 [ 2.764840] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.770835] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.776660] e1000e: Intel(R) PRO/1000 Network Driver [ 2.781303] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.787640] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.792935] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.798848] PPP generic driver version 2.4.2 [ 2.803098] PPP BSD Compression module registered [ 2.807907] PPP Deflate Compression module registered [ 2.813167] PPP MPPE Compression module registered [ 2.817925] usbcore: registered new interface driver r8152 [ 2.823731] usbcore: registered new interface driver asix [ 2.829013] usbcore: registered new interface driver ax88179_178a [ 2.835136] usbcore: registered new interface driver cdc_ether [ 2.840829] usbcore: registered new interface driver net1080 [ 2.846691] usbcore: registered new interface driver cdc_subset [ 2.852725] usbcore: registered new interface driver zaurus [ 2.858170] usbcore: registered new interface driver cdc_ncm [ 2.864099] usbcore: registered new interface driver aqc111 [ 2.869734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.875562] ohci-pci: OHCI PCI platform driver [ 2.880122] ohci-platform: OHCI generic platform driver [ 2.885912] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.892174] usbcore: registered new interface driver uas [ 2.896210] usbcore: registered new interface driver usb-storage [ 2.902560] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.908581] mousedev: PS/2 mouse device common for all mice [ 2.913570] usbcore: registered new interface driver xpad [ 2.921513] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.924349] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.932116] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.938600] i2c /dev entries driver [ 2.941719] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.947838] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.953094] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.958281] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.963857] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.969045] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.974727] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.987187] device-mapper: uevent: version 1.0.3 [ 2.987618] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.994639] cpuidle: Initializing cpuidle driver [ 2.998754] sdhci: Secure Digital Host Controller Interface driver [ 3.003945] sdhci: Copyright(c) Pierre Ossman [ 3.008011] Synopsys Designware Multimedia Card Interface Driver [ 3.013936] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.019861] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.020426] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.033286] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.053217] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.062336] vdd-1v0: supplied by regulator-dummy [ 3.067756] vdd-1v8-hs: supplied by regulator-dummy [ 3.072528] vdd-1v8-ls: supplied by regulator-dummy [ 3.077323] vdd-1v8-ao: supplied by regulator-dummy [ 3.081163] vddio-ddr-1v1: supplied by regulator-dummy [ 3.085529] vdd-rtc: supplied by regulator-dummy [ 3.087175] spmic-ldo1: supplied by regulator-dummy [ 3.088396] vdd-ao-3v3: supplied by regulator-dummy [ 3.094481] vddio-emmc-3v3: supplied by regulator-dummy [ 3.100672] spmic-ldo4: supplied by regulator-dummy [ 3.101863] vdd-usb-3v3: supplied by regulator-dummy [ 3.107975] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.114044] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.119515] spmic-ldo8: supplied by vdd-1v8-ls [ 3.120969] gpio-510 (gpio_default): hogged as output/high [ 3.122244] gpio-511 (gpio_default): hogged as output/high [ 3.127098] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.265653] max77686-rtc max77620-rtc: registered as rtc0 [ 3.266627] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.266937] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.999791] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.000775] hid: raw HID events driver (C) Jiri Kosina [ 4.001519] usbcore: registered new interface driver usbhid [ 4.001661] usbhid: USB HID core driver [ 4.003770] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.005068] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.130345] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.205139] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 75.604 ms) ÿá[ 4.090021] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.090981] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.092752] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.093753] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.096083] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.096832] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.097418] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.099116] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.099543] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.101786] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.106232] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.112689] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.117736] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.124745] denver_knobs_init:MTS_VERSION:55637613 [ 4.137454] t19x_cache tegra-cache: probed [ 4.140782] optee: probing for conduit method. [ 4.141761] optee: revision 3.16 (65cc2218) [ 4.143248] optee: dynamic shared memory is enabled [ 4.145167] optee: initialized driver [ 4.150989] nvpmodel: initialized successfully [ 4.152247] tegra_hv: get_hvd: not initialized yet [ 4.156936] user_ivc_mempool: hypervisor not present [ 4.163581] usbcore: registered new interface driver snd-usb-audio [ 4.169491] u32 classifier [ 4.170857] input device check on [ 4.174715] Actions configured [ 4.178078] Initializing XFRM netlink socket [ 4.183115] NET: Registered protocol family 10 [ 4.189912] Segment Routing with IPv6 [ 4.190468] NET: Registered protocol family 17 [ 4.194541] NET: Registered protocol family 15 [ 4.199246] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.212840] Bluetooth: RFCOMM socket layer initialized [ 4.217246] Bluetooth: RFCOMM ver 1.11 [ 4.221392] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.227150] Bluetooth: HIDP socket layer initialized [ 4.232741] 9pnet: Installing 9P2000 support [ 4.236376] Key type dns_resolver registered [ 4.242749] registered taskstats version 1 [ 4.245099] Loading compiled-in X.509 certificates [ 4.257934] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.261041] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.271547] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.272788] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.281611] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.289877] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.407882] tegra194-pcie 14160000.pcie: Link up [ 4.410870] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.411110] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.411323] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.411590] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.411899] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.412314] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.412763] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.426644] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.427156] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.427942] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.429517] pci 0004:01:00.0: supports D1 D2 [ 4.429715] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.438596] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.438967] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.439299] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.440059] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.440449] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.440653] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.442421] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.450106] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.458973] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.468904] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.473562] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.479664] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.486041] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.496191] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.496577] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.505107] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.513711] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.620544] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.621323] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.621592] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.621750] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.622033] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.622281] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.622662] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.623069] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.638766] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.639119] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.641475] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.643184] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.645357] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.647262] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.648538] pci 0005:00:00.0: Removing from iommu group 7 [ 5.648891] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.680992] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.703422] host1x 13e10000.host1x: initialized [ 5.705425] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.706679] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.707906] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.708615] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.709537] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.710191] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.711044] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.711900] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.713392] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.720990] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.730730] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.737940] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.747787] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.754808] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.764710] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.771452] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.781289] falcon 15340000.vic: Adding to iommu group 17 [ 5.797625] falcon 15340000.vic: initialized [ 5.798638] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.804495] falcon 15380000.nvjpg: initialized [ 5.805189] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.813995] falcon 154c0000.nvenc: initialized [ 5.814582] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.824865] falcon 15a80000.nvenc1: initialized [ 5.825527] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.838318] nvdec 15480000.nvdec: initialized [ 5.838970] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.848610] nvdec 15140000.nvdec1: initialized [ 5.849277] tsec 15500000.tsec: Adding to iommu group 18 [ 5.855372] tsec 15500000.tsec: initialized [ 5.856102] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.861760] tsec 15100000.tsecb: initialized [ 5.866404] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.890342] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.902770] gpio-374 (wifi-enable): hogged as output/high [ 5.903073] gpio-431 (camera-control-output-low): hogged as output/low [ 5.903356] gpio-432 (camera-control-output-low): hogged as output/low [ 5.905273] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.907101] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.907605] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.912771] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.918510] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.923884] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.929557] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.938169] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.945141] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.956646] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.961963] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.968021] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.976720] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.985919] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.992979] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.000773] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.006877] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.016555] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.022729] pva 16000000.pva0: Adding to iommu group 22 [ 6.049213] pva 16000000.pva0: initialized [ 6.054691] pva 16800000.pva1: Adding to iommu group 23 [ 6.066353] pva 16800000.pva1: initialized [ 6.072096] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.085665] nvdla 15880000.nvdla0: initialized [ 6.087064] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.096229] nvdla 158c0000.nvdla1: initialized [ 6.100432] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.100764] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.101383] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.101858] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.101887] tegradc 15210000.display: Adding to iommu group 26 [ 6.101914] tegradc 15200000.display: Adding to iommu group 26 [ 6.102294] tegradccommon 15200000.display-hub: dma mapping done [ 6.102358] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.103456] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.111078] tegradc 15210000.display: disp0 connected to head1->sor [ 6.112839] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.118279] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.118564] tegradc 15210000.display: DT parsed successfully [ 6.124269] tegra_cec 3960000.tegra_cec: probed [ 6.130030] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.130676] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.138762] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.143355] generic_infoframe_type: 0x87 [ 6.150392] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.155809] tegradc 15200000.display: DT parsed successfully [ 6.155953] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.162725] kfuse 3830000.kfuse: initialized [ 6.196801] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.198062] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.204742] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.204749] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.220176] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.227513] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.233596] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.246584] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.247583] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.264876] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.272873] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.274123] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.285263] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.285892] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.302882] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.308001] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.327878] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.328296] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.330379] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.339098] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.347269] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.354396] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.361469] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.368695] usb usb1: Product: xHCI Host Controller [ 6.373824] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.379878] usb usb1: SerialNumber: 3610000.xhci [ 6.385715] hub 1-0:1.0: USB hub found [ 6.388458] hub 1-0:1.0: 4 ports detected [ 6.393190] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.398104] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.405694] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.413558] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.421051] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.428325] usb usb2: Product: xHCI Host Controller [ 6.433535] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.439712] usb usb2: SerialNumber: 3610000.xhci [ 6.445482] hub 2-0:1.0: USB hub found [ 6.448247] hub 2-0:1.0: 4 ports detected [ 6.492850] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.499213] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.500654] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.500851] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.513230] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.514285] tegra194-cpufreq ccplex: probed with BWMGR [ 6.515579] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.516291] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.516784] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.518129] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.526107] mmc0: CQHCI version 5.10 [ 6.526275] tegra194-vi5 15c10000.vi: initialized [ 6.527779] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.528857] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.531828] generic_infoframe_type: 0x87 [ 6.538546] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.542182] tegradc 15200000.display: DT parsed successfully [ 6.542216] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.550058] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.550068] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.556244] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.560002] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.563833] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.570325] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.570329] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.570685] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.577009] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.585142] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.599764] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.607807] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.615923] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.623187] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.628518] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.629912] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.634437] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.653967] tegradc 15200000.display: probed [ 6.666254] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.666309] mmc0: Command Queue Engine enabled [ 6.666313] mmc0: periodic cache flush enabled [ 6.666326] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.666783] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.666904] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.670905] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.673104] nvethernet 2490000.ethernet: Macsec not supported [ 6.740856] Console: switching to colour frame buffer device 240x67 [ 6.746802] tegradc 15200000.display: fb registered [ 6.751704] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.757444] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.758054] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.766252] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.771392] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.776873] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.790485] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.797828] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.804795] tegra-se-nvhost 15810000.se: initialized [ 6.809546] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.814901] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.821266] tegra-se-nvhost 15820000.se: initialized [ 6.827391] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.832414] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.838484] tegra-se-nvhost 15830000.se: initialized [ 6.844230] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.849820] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.851523] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.852442] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.853513] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.853521] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.854076] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.854081] Extcon AUX1(HDMI) enable [ 6.854213] tegradc 15210000.display: disp1 connected to head1->sor [ 6.854373] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.854456] tegradc 15210000.display: DT parsed successfully [ 6.854490] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.854607] tegradc 15210000.display: vblank syncpt # 16 for dc 1 [ 6.854614] tegradc 15210000.display: vpulse3 syncpt # 17 for dc 1 [ 6.856373] tegra-se-nvhost 15840000.se: initialized [ 6.861748] tegradc 15210000.display: probed [ 6.863807] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.863812] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.863822] usb 1-2: Manufacturer: Generic [ 6.873922] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.882618] hub 1-2:1.0: USB hub found [ 6.889174] tegra_actmon d230000.actmon: in actmon_register()... [ 6.896485] hub 1-2:1.0: 4 ports detected [ 6.898752] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.972565] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.974209] tegra_actmon d230000.actmon: initialization Completed for the device mc_all ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.004614] tegradc 15210000.display: fb registered [ 7.004776] tegradc 15200000.display: blank - powerdown [ 7.005142] hvc_sysfs: hypervisor is not present [ 7.008007] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.008013] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.008021] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.017544] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.017550] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.017554] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.017558] usb 2-3: Manufacturer: Generic [ 7.028197] hub 2-3:1.0: USB hub found [ 7.030036] hub 2-3:1.0: 4 ports detected [ 7.031708] ALSA device list: [ 7.031716] No soundcards found. [ 7.052836] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.052841] Extcon AUX1(HDMI) disable [ 7.076124] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.076938] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.090251] tegradc 15200000.display: unblank [ 7.091319] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.091506] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.097358] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.099169] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.103124] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.103128] Extcon AUX1(HDMI) enable [ 7.115914] tegradc 15200000.display: sync windows ret = 246 [ 7.135720] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.135870] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.185092] tegradc 15210000.display: blank - powerdown [ 7.189961] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.189966] Extcon DP: HPD disabled [ 7.189971] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.189987] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.189994] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.221951] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.221961] Extcon HDMI: HPD enabled [ 7.230266] Freeing unused kernel memory: 3968K [ 7.232566] tegradc 15200000.display: hdmi: plugged [ 7.237327] Run /init as init process [ 7.242464] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.252746] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.288966] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.290467] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.292008] usb 1-3: Product: Bluetooth Radio [ 7.293258] usb 1-3: Manufacturer: Realtek [ 7.294521] usb 1-3: SerialNumber: 00e04c000001 [ 7.303749] Root device found: mmcblk0p1 [ 7.307090] Found dev node: /dev/mmcblk0p1 [ 7.344107] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.349631] Rootfs mounted over mmcblk0p1 [ 7.386505] Switching from initrd to actual rootfs [ 7.536037] systemd[1]: System time before build time, advancing clock. [ 7.605649] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.610473] systemd[1]: Detected architecture arm64. [ 7.653918] systemd[1]: Set hostname to . [ 7.822787] systemd-sysv-generator[249]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.176000] random: systemd: uninitialized urandom read (16 bytes read) [ 8.177728] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.179383] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.185031] systemd[1]: Created slice system-modprobe.slice. [ 8.188743] random: systemd: uninitialized urandom read (16 bytes read) [ 8.191372] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.194540] random: systemd: uninitialized urandom read (16 bytes read) [ 8.197274] systemd[1]: Created slice User and Session Slice. [ 8.200728] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.204912] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.208289] systemd[1]: Reached target User and Group Name Lookups. [ 8.211449] systemd[1]: Reached target Slices. [ 8.214578] systemd[1]: Reached target Swap. [ 8.218622] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.222269] systemd[1]: Listening on Syslog Socket. [ 8.225900] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.229355] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.233641] systemd[1]: Listening on Journal Audit Socket. [ 8.237315] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.242278] systemd[1]: Listening on Journal Socket. [ 8.246264] systemd[1]: Listening on udev Control Socket. [ 8.250579] systemd[1]: Listening on udev Kernel Socket. [ 8.259087] systemd[1]: Mounting Huge Pages File System... [ 8.267628] systemd[1]: Mounting POSIX Message Queue File System... [ 8.275886] systemd[1]: Mounting RPC Pipe File System... [ 8.284418] systemd[1]: Mounting Kernel Debug File System... [ 8.292925] systemd[1]: Mounting Kernel Trace File System... [ 8.303049] systemd[1]: Starting Journal Service... [ 8.312375] systemd[1]: Starting Set the console keyboard layout... [ 8.321017] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.324711] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.331428] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.333048] random: crng init done [ 8.334646] random: 7 urandom warning(s) missed due to ratelimiting [ 8.343002] systemd[1]: Started Nameserver information manager. [ 8.347467] systemd[1]: Reached target Network (Pre). [ 8.355466] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.357627] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.364511] systemd[1]: Starting Load Kernel Modules... [ 8.372996] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.381284] systemd[1]: Starting udev Coldplug all Devices... [ 8.392623] systemd[1]: Mounted Huge Pages File System. [ 8.396431] systemd[1]: Mounted POSIX Message Queue File System. [ 8.400282] systemd[1]: Mounted RPC Pipe File System. [ 8.401377] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.407876] systemd[1]: Mounted Kernel Debug File System. [ 8.410029] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.410827] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.413569] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.413584] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.413588] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.413858] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.414108] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.414270] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.414276] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.443656] systemd[1]: Mounted Kernel Trace File System. [ 8.454487] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.460074] systemd[1]: nvfb-udev.service: Succeeded. [ 8.464978] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.477876] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.490873] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.493007] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.499812] systemd[1]: Starting Load/Save Random Seed... [ 8.500401] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.500401] [ 8.520001] systemd[1]: Starting Create System Users... [ 8.545943] systemd[1]: Finished Load Kernel Modules. [ 8.550225] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.557322] systemd[1]: Mounting Kernel Configuration File System... [ 8.565481] systemd[1]: Started OP-TEE Client Supplicant. [ 8.574866] systemd[1]: Starting Apply Kernel Variables... [ 8.584379] systemd[1]: Finished Load/Save Random Seed. [ 8.588287] systemd[1]: Mounted Kernel Configuration File System. [ 8.601158] systemd[1]: Finished Set the console keyboard layout. [ 8.607570] systemd[1]: Finished Create System Users. [ 10.127976] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.134548] imx219 9-0010: board setup failed [ 10.135996] imx219: probe of 9-0010 failed with error -121 [ 10.145300] hot-surface-alert cooling state: 0 -> 1 [ 10.161238] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.167638] imx219 10-0010: board setup failed [ 10.169131] imx219: probe of 10-0010 failed with error -121 [ 10.787438] using random self ethernet address [ 10.885679] using random host ethernet address [ 11.546998] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.547004] Creating 1 MTD partitions on "spi6.0": [ 11.547014] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.466792] using random self ethernet address [ 12.468350] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.794565] nvidia: loading out-of-tree module taints kernel. [ 59.349412] watchdog: watchdog0: watchdog did not stop! [ 59.797515] Trying to unregister non-registered hwtime source [ 62.863251] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.864861] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 69000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.905] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.915] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.922] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.962] I> sdmmc-3 params source = safe params [0001.305] I> sdmmc DDR50 mode [0001.323] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.340] W> Cannot find any partition table for 00000003 [0001.341] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.358] I> Active Boot chain : 0 [0002.029] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.204] I> Welcome to NVDisp-Init [0003.204] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.205] I> 0) Base:0x00000000 Size:0x00000000 [0003.205] I> 1) Base:0xc8300000 Size:0x00100000 [0003.205] I> 2) Base:0xc9800000 Size:0x00200000 [0003.206] I> 3) Base:0xc8600000 Size:0x00200000 [0003.208] I> 4) Base:0xc8200000 Size:0x00100000 [0003.213] I> 5) Base:0xc8100000 Size:0x00100000 [0003.217] I> 6) Base:0xc9400000 Size:0x00400000 [0003.222] I> 7) Base:0xc9000000 Size:0x00400000 [0003.226] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.235] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.244] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.248] I> 13) Base:0x40046000 Size:0x00002000 [0003.253] I> 14) Base:0x40048000 Size:0x00002000 [0003.257] I> 15) Base:0xaf000000 Size:0x00004000 [0003.262] I> 16) Base:0x4004a000 Size:0x00002000 [0003.266] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.271] I> 18) Base:0x4004c000 Size:0x00002000 [0003.275] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.280] I> 20) Base:0x4004e000 Size:0x00002000 [0003.284] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.293] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.302] I> 25) Base:0x40050000 Size:0x00002000 [0003.306] I> 26) Base:0x40040000 Size:0x00006000 [0003.311] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.315] I> 28) Base:0xc8400000 Size:0x00200000 [0003.320] I> 29) Base:0xc8800000 Size:0x00400000 [0003.324] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.329] I> 31) Base:0x00000000 Size:0x00000000 [0003.333] I> 32) Base:0xf8000000 Size:0x08000000 [0003.338] I> 33) Base:0xce000000 Size:0x2a000000 [0003.342] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.351] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.360] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.369] I> 40) Base:0x00000000 Size:0x00000000 [0003.373] I> 41) Base:0x00000000 Size:0x00000000 [0003.378] I> 42) Base:0x00000000 Size:0x00000000 [0003.382] I> 43) Base:0x00000000 Size:0x00000000 [0003.387] I> 44) Base:0x00000000 Size:0x00000000 [0003.391] I> 45) Base:0x00000000 Size:0x00000000 [0003.396] GIC-SPI Target CPU: 0 [0003.399] Interrupts Init done [0003.402] calling constructors [0003.404] initializing heap [0003.407] I> Heap: [0xa0960000 ... 0xadf00000] [0003.411] initializing threads [0003.414] initializing timers [0003.417] creating bootstrap completion thread [0003.421] top of bootstrap2() [0003.424] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.429] initializing platform [0003.432] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.437] W> device prod register failed [0003.441] I> Bl_dtb @0xadf00000 [0003.444] I> gpio framework initialized [0003.455] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.466] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.493] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.503] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.519] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.526] I> rx_clk_tap_delay : 16 [0003.530] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.538] I> qspi flash-0 params source = boot args [0003.542] W> No board IDs available [0003.545] E> Failed to get board id info! [0003.551] I> sdmmc-3 params source = safe params [0003.558] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.564] E> Failed to publish 00000003 [0003.569] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.588] I> regulator 'vdd-hdmi-5v0' already enabled [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.594] I> hdmi cable connected [0003.599] W> set volts not configured for 'vdd-1v0' [0003.603] W> set volts not configured for 'vdd-1v8-hs' [0003.604] I> retrieved tmds range from prod_list_hdmi_soc [0003.609] E> invalid display type [0003.610] E> cannot find any other nvdisp nodes [0003.626] I> edid read success [0003.639] I> edid read success [0003.639] I> width = 640, height = 480, frequency = 25174825 [0003.640] I> width = 1920, height = 1080, frequency = 148500000 [0003.640] I> width = 1280, height = 768, frequency = 79500000 [0003.640] I> width = 1360, height = 768, frequency = 85500000 [0003.641] I> width = 720, height = 480, frequency = 26973026 [0003.645] I> width = 720, height = 576, frequency = 26973026 [0003.650] I> width = 1280, height = 720, frequency = 74175824 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1920, height = 1080, frequency = 148351648 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 720, height = 480, frequency = 26973026 [0003.678] I> width = 720, height = 576, frequency = 26973026 [0003.684] I> width = 3840, height = 2160, frequency = 296703296 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 4096, height = 2160, frequency = 296703296 [0003.713] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.724] I> hdmi_enable, starting HDMI initialisation [0003.729] I> hdmi_enable, HDMI initialisation complete [0003.739] initializing target [0003.739] calling apps_init() [0003.740] starting app kernel_boot_app [0003.741] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000693] Console: colour dummy device 80x25 [ 0.002130] printk: console [tty0] enabled [ 0.002195] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002231] pid_max: default: 32768 minimum: 301 [ 0.002409] LSM: Security Framework initializing [ 0.002467] Yama: becoming mindful. [ 0.002512] SELinux: Initializing. [ 0.002662] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002714] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005458] rcu: Hierarchical SRCU implementation. [ 0.005697] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006415] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006464] DTB Build time: Aug 10 2022 20:31:49 [ 0.009204] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009465] Remapping and enabling EFI services. [ 0.011694] smp: Bringing up secondary CPUs ... [ 0.040811] Detected PIPT I-cache on CPU1 [ 0.040885] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070396] Detected PIPT I-cache on CPU2 [ 0.070553] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100092] Detected PIPT I-cache on CPU3 [ 0.100239] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.129885] Detected PIPT I-cache on CPU4 [ 0.130064] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.159800] Detected PIPT I-cache on CPU5 [ 0.159893] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160330] smp: Brought up 1 node, 6 CPUs [ 0.160499] SMP: Total of 6 processors activated. [ 0.160574] CPU features: detected: Privileged Access Never [ 0.160597] CPU features: detected: LSE atomic instructions [ 0.160610] CPU features: detected: User Access Override [ 0.160622] CPU features: detected: 32-bit EL0 Support [ 0.160668] CPU features: detected: RAS Extension Support [ 0.160682] CPU features: detected: CRC32 instructions [ 0.160695] CPU features: detected: 32-bit EL1 Support [ 0.230832] CPU: All CPU(s) started at EL2 [ 0.237319] devtmpfs: initialized [ 0.307170] Registered cp15_barrier emulation handler [ 0.307273] Registered setend emulation handler [ 0.307322] KASLR enabled [ 0.307632] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.307736] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.309786] pinctrl core: initialized pinctrl subsystem [ 0.310925] SMBIOS 3.0.0 present. [ 0.310966] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.311778] NET: Registered protocol family 16 [ 0.314433] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.315003] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.315533] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.315618] audit: initializing netlink subsys (disabled) [ 0.315955] audit: type=2000 audit(0.312:1): state=initialized audit_enabled=0 res=1 [ 0.316519] thermal_sys: Registered thermal governor 'step_wise' [ 0.316531] thermal_sys: Registered thermal governor 'power_allocator' [ 0.316554] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.320194] cpuidle: using governor menu [ 0.320709] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.321204] ASID allocator initialised with 32768 entries [ 0.321667] Serial: AMBA PL011 UART driver [ 0.326603] Tegra reboot handler registered. [ 0.410782] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.411014] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.411256] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.411330] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.411505] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.411569] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.411778] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.411849] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.412045] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.412111] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.415335] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.415384] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.415428] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.415482] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.415546] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.415611] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.415654] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.415723] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.415766] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.415834] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.415876] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.415916] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.415959] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.415999] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.416040] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.416080] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.416130] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.416254] mc-err: mcerr ops are set to t19x [ 0.431090] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.431119] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.431138] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.431156] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.438384] ACPI: Interpreter disabled. [ 0.439885] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.441644] iommu: Default domain type: Translated [ 0.441732] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.442312] SCSI subsystem initialized [ 0.442491] usbcore: registered new interface driver usbfs [ 0.442538] usbcore: registered new interface driver hub [ 0.442581] usbcore: registered new device driver usb [ 0.443110] mc: Linux media interface: v0.10 [ 0.443154] videodev: Linux video capture interface: v2.00 [ 0.443602] pps_core: LinuxPPS API ver. 1 registered [ 0.443619] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.443672] PTP clock support registered [ 0.443946] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.444273] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.444362] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.445136] Registered efivars operations [ 0.452671] FPGA manager framework [ 0.452806] Advanced Linux Sound Architecture Driver Initialized. [ 0.453654] Bluetooth: Core ver 2.22 [ 0.453715] NET: Registered protocol family 31 [ 0.453732] Bluetooth: HCI device and connection manager initialized [ 0.453753] Bluetooth: HCI socket layer initialized [ 0.453770] Bluetooth: L2CAP socket layer initialized [ 0.453797] Bluetooth: SCO socket layer initialized [ 0.455588] camchar: rtcpu character device driver loaded [ 0.456391] clocksource: Switched to clocksource arch_sys_counter [ 0.867490] VFS: Disk quotas dquot_6.6.0 [ 0.867582] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.867945] pnp: PnP ACPI: disabled [ 0.879933] la/ptsa driver initialized. [ 0.880072] NET: Registered protocol family 2 [ 0.880313] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.888178] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.888405] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.888789] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.889412] TCP: Hash tables configured (established 65536 bind 65536) [ 0.889646] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.889778] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.890081] NET: Registered protocol family 1 [ 0.891175] RPC: Registered named UNIX socket transport module. [ 0.891206] RPC: Registered udp transport module. [ 0.891225] RPC: Registered tcp transport module. [ 0.891242] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.891274] PCI: CLS 0 bytes, default 64 [ 0.891550] Trying to unpack rootfs image as initramfs... [ 1.157309] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.160473] Freeing initrd memory: 8196K [ 1.164336] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.164439] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.164508] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.164801] kvm [1]: IPA Size Limit: 40 bits [ 1.165249] kvm [1]: vgic interrupt IRQ9 [ 1.165748] kvm [1]: VHE mode initialized successfully [ 1.166928] Initialise system trusted keyrings [ 1.167196] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.172176] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.173066] NFS: Registering the id_resolver key type [ 1.173102] Key type id_resolver registered [ 1.173115] Key type id_legacy registered [ 1.173198] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.173220] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.173261] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.182914] NET: Registered protocol family 38 [ 1.182937] Key type asymmetric registered [ 1.182952] Asymmetric key parser 'x509' registered [ 1.183039] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.183302] io scheduler mq-deadline registered [ 1.183319] io scheduler kyber registered [ 1.188804] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.191783] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.191859] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.191954] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.192053] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.192132] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.197760] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.197934] scrncapt: init (heads:4 wins:6 planes:4) [ 1.199067] EINJ: ACPI disabled. [ 1.202534] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.202559] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.202573] tegra-pmc: ### PMC reset level: L1 [ 1.202586] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.202659] tegra-pmc: PMC Prod config success [ 1.207498] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.212160] random: fast init done [ 1.212397] printk: console [ttyTCU0] enabled [ 2.764962] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.769542] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.773872] arm-smmu 10000000.iommu: stage 1 translation [ 2.779729] arm-smmu 10000000.iommu: stage 2 translation [ 2.784853] arm-smmu 10000000.iommu: nested translation [ 2.790444] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.797620] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.807506] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.810485] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.817064] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.824983] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.830084] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.834812] arm-smmu 12000000.iommu: stage 1 translation [ 2.840576] arm-smmu 12000000.iommu: stage 2 translation [ 2.845746] arm-smmu 12000000.iommu: nested translation [ 2.851453] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.858355] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.868432] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.871451] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.878059] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.885842] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.895227] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.898727] tegra_profiler: auth: init [ 2.902993] THERMAL EST: found 3 subdevs [ 2.906129] THERMAL EST num_resources: 0 [ 2.910227] [THERMAL EST subdev 0] [ 2.913320] [THERMAL EST subdev 1] [ 2.916991] [THERMAL EST subdev 2] [ 2.919935] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.926397] THERMAL EST: thz register success. [ 2.930659] THERMAL EST: end of probe, return err: 0 [ 2.936168] nvsciipc: loaded module [ 2.943160] tun: Universal TUN/TAP device driver, 1.6 [ 2.945674] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.951726] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.957536] e1000e: Intel(R) PRO/1000 Network Driver [ 2.962208] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.968280] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.973839] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.979868] PPP generic driver version 2.4.2 [ 2.984273] PPP BSD Compression module registered [ 2.988555] PPP Deflate Compression module registered [ 2.993804] PPP MPPE Compression module registered [ 2.998850] usbcore: registered new interface driver r8152 [ 3.004619] usbcore: registered new interface driver asix [ 3.009935] usbcore: registered new interface driver ax88179_178a [ 3.016042] usbcore: registered new interface driver cdc_ether [ 3.021734] usbcore: registered new interface driver net1080 [ 3.027340] usbcore: registered new interface driver cdc_subset [ 3.033632] usbcore: registered new interface driver zaurus [ 3.039069] usbcore: registered new interface driver cdc_ncm [ 3.044756] usbcore: registered new interface driver aqc111 [ 3.050395] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.056473] ohci-pci: OHCI PCI platform driver [ 3.061023] ohci-platform: OHCI generic platform driver [ 3.066891] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.073049] usbcore: registered new interface driver uas [ 3.077321] usbcore: registered new interface driver usb-storage [ 3.083228] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.089254] mousedev: PS/2 mouse device common for all mice [ 3.094227] usbcore: registered new interface driver xpad [ 3.102366] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.105296] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.112994] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.119580] i2c /dev entries driver [ 3.122931] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.128769] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.133698] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.139370] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.144694] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.150243] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.155712] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.169343] device-mapper: uevent: version 1.0.3 [ 3.169816] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.176097] cpuidle: Initializing cpuidle driver [ 3.180154] sdhci: Secure Digital Host Controller Interface driver [ 3.184830] sdhci: Copyright(c) Pierre Ossman [ 3.188660] Synopsys Designware Multimedia Card Interface Driver [ 3.194880] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.200901] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.201727] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.214048] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.236986] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.246569] vdd-1v0: supplied by regulator-dummy [ 3.252075] vdd-1v8-hs: supplied by regulator-dummy [ 3.256985] vdd-1v8-ls: supplied by regulator-dummy [ 3.261773] vdd-1v8-ao: supplied by regulator-dummy [ 3.265685] vddio-ddr-1v1: supplied by regulator-dummy [ 3.270088] vdd-rtc: supplied by regulator-dummy [ 3.271828] spmic-ldo1: supplied by regulator-dummy [ 3.273127] vdd-ao-3v3: supplied by regulator-dummy [ 3.279313] vddio-emmc-3v3: supplied by regulator-dummy [ 3.285759] spmic-ldo4: supplied by regulator-dummy [ 3.287037] vdd-usb-3v3: supplied by regulator-dummy [ 3.293150] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.299418] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.304980] spmic-ldo8: supplied by vdd-1v8-ls [ 3.306499] gpio-510 (gpio_default): hogged as output/high [ 3.307899] gpio-511 (gpio_default): hogged as output/high [ 3.310775] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.446914] max77686-rtc max77620-rtc: registered as rtc0 [ 3.448263] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.448671] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.271245] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.272429] hid: raw HID events driver (C) Jiri Kosina [ 4.273310] usbcore: registered new interface driver usbhid [ 4.273469] usbhid: USB HID core driver [ 4.275527] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.276999] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.335924] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.410130] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.016 ms) ÿá[ 4.361341] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.361914] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.362823] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.363684] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.365306] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.366008] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.366779] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.368157] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.368481] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.371645] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.377565] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.383910] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.389541] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.395572] denver_knobs_init:MTS_VERSION:55637613 [ 4.407995] t19x_cache tegra-cache: probed [ 4.411424] optee: probing for conduit method. [ 4.412260] optee: revision 3.16 (65cc2218) [ 4.413227] optee: dynamic shared memory is enabled [ 4.416436] optee: initialized driver [ 4.423206] nvpmodel: initialized successfully [ 4.423706] tegra_hv: get_hvd: not initialized yet [ 4.428421] user_ivc_mempool: hypervisor not present [ 4.434496] usbcore: registered new interface driver snd-usb-audio [ 4.441155] u32 classifier [ 4.442124] input device check on [ 4.445902] Actions configured [ 4.449817] Initializing XFRM netlink socket [ 4.454531] NET: Registered protocol family 10 [ 4.461283] Segment Routing with IPv6 [ 4.461903] NET: Registered protocol family 17 [ 4.465917] NET: Registered protocol family 15 [ 4.470594] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.484520] Bluetooth: RFCOMM socket layer initialized [ 4.488611] Bluetooth: RFCOMM ver 1.11 [ 4.492794] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.498365] Bluetooth: HIDP socket layer initialized [ 4.504705] 9pnet: Installing 9P2000 support [ 4.507760] Key type dns_resolver registered [ 4.513615] registered taskstats version 1 [ 4.516200] Loading compiled-in X.509 certificates [ 4.529461] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.532432] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.542607] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.544495] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.552743] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.561385] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.676430] tegra194-pcie 14160000.pcie: Link up [ 4.679528] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.679741] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.679873] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.680232] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.680448] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.680895] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.681319] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.696618] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.697140] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.697623] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.699289] pci 0004:01:00.0: supports D1 D2 [ 4.699481] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.712222] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.712615] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.712894] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.713501] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.713740] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.713991] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.714272] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.718684] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.726958] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.737911] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.742369] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.748021] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.755239] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.763536] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.764904] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.773595] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.781818] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.897032] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.897567] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.897786] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.897991] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.898245] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.898486] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.898895] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.899321] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.919200] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.919576] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.921509] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.922647] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.924010] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.925728] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.926656] pci 0005:00:00.0: Removing from iommu group 7 [ 5.926964] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.962812] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.987271] host1x 13e10000.host1x: initialized [ 5.989132] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.989958] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.990911] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.991540] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.992654] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.993226] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.994115] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.994700] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.995544] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.997197] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.007002] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.014231] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.024099] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.031395] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.041086] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.047840] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.058066] falcon 15340000.vic: Adding to iommu group 17 [ 6.072525] falcon 15340000.vic: initialized [ 6.073617] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.079663] falcon 15380000.nvjpg: initialized [ 6.080747] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.092284] falcon 154c0000.nvenc: initialized [ 6.093021] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.101855] falcon 15a80000.nvenc1: initialized [ 6.102664] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.114177] nvdec 15480000.nvdec: initialized [ 6.114913] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.125290] nvdec 15140000.nvdec1: initialized [ 6.126224] tsec 15500000.tsec: Adding to iommu group 18 [ 6.132144] tsec 15500000.tsec: initialized [ 6.132798] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.139645] tsec 15100000.tsecb: initialized [ 6.144496] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.172000] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.184567] gpio-374 (wifi-enable): hogged as output/high [ 6.184867] gpio-431 (camera-control-output-low): hogged as output/low [ 6.185160] gpio-432 (camera-control-output-low): hogged as output/low [ 6.186741] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.188219] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.188845] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.190486] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.194687] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.200267] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.206156] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.214583] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.221796] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.233353] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.238264] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.244063] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.253235] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.262384] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.270280] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.277307] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.283236] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.293144] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.299414] pva 16000000.pva0: Adding to iommu group 22 [ 6.326068] pva 16000000.pva0: initialized [ 6.330892] pva 16800000.pva1: Adding to iommu group 23 [ 6.351456] pva 16800000.pva1: initialized [ 6.357265] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.371499] nvdla 15880000.nvdla0: initialized [ 6.373348] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.386677] random: crng init done [ 6.391380] nvdla 158c0000.nvdla1: initialized [ 6.395426] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.395614] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.395704] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.396214] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.396343] tegradc 15200000.display: Adding to iommu group 26 [ 6.396364] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.396683] tegradccommon 15200000.display-hub: dma mapping done [ 6.398990] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.401583] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.401847] tegra_cec 3960000.tegra_cec: probed [ 6.403472] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.405229] tegradc 15210000.display: Adding to iommu group 26 [ 6.405635] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.405771] generic_infoframe_type: 0x87 [ 6.405921] tegradc 15200000.display: DT parsed successfully [ 6.406009] tegradc 15200000.display: Display dc.00000000c940bed9 registered with id=0 [ 6.410261] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.411152] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.411774] kfuse 3830000.kfuse: initialized [ 6.412557] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.412566] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.413111] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.413902] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.415664] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.421026] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.438739] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.446744] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.455193] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.459025] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.476893] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.485620] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.545477] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.556488] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.557352] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.563559] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.563654] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.571843] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.576934] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.586163] tegradc 15210000.display: disp0 connected to head1->sor [ 6.590808] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.600585] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.607449] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.612298] tegradc 15210000.display: DT parsed successfully [ 6.619463] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.619492] usb usb1: Product: xHCI Host Controller [ 6.627786] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.633361] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.633392] usb usb1: SerialNumber: 3610000.xhci [ 6.665903] hub 1-0:1.0: USB hub found [ 6.668219] hub 1-0:1.0: 4 ports detected [ 6.673259] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.677872] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.685629] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.693357] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.700928] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.708165] usb usb2: Product: xHCI Host Controller [ 6.713322] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.719624] usb usb2: SerialNumber: 3610000.xhci [ 6.725280] hub 2-0:1.0: USB hub found [ 6.727803] hub 2-0:1.0: 4 ports detected [ 6.769803] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.775972] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.777698] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.777878] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.791078] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.792235] tegra194-cpufreq ccplex: probed with BWMGR [ 6.793564] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.794025] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.794469] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.795621] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.803243] tegra194-vi5 15c10000.vi: initialized [ 6.804901] mmc0: CQHCI version 5.10 [ 6.805858] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.806117] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.812018] generic_infoframe_type: 0x87 [ 6.818437] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.822148] tegradc 15200000.display: DT parsed successfully [ 6.829975] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.835948] tegradc 15200000.display: Display dc.0000000086d60274 registered with id=0 [ 6.842057] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.842062] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.842072] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.851001] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.878221] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.878552] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.886422] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.892394] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.892974] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.901017] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.908262] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.909579] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.915347] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.915559] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.929872] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.936024] nvethernet 2490000.ethernet: Macsec not supported [ 6.940394] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.942050] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.981250] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.983557] tegradc 15200000.display: probed [ 6.989630] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.999024] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.005976] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.014607] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.020666] tegra-se-nvhost 15810000.se: initialized [ 7.029813] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.030656] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.031167] mmc0: Command Queue Engine enabled [ 7.037040] tegra-se-nvhost 15820000.se: initialized [ 7.040818] mmc0: periodic cache flush enabled [ 7.040839] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.047657] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.050660] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.056817] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.062584] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.081036] Console: switching to colour frame buffer device 240x67 [ 7.081274] tegra-se-nvhost 15830000.se: initialized [ 7.087056] tegradc 15200000.display: fb registered [ 7.091517] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.093208] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.096634] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.105361] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.123568] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.123859] tegra-se-nvhost 15840000.se: initialized [ 7.133708] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.135560] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.147511] tegra_actmon d230000.actmon: in actmon_register()... [ 7.152060] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.157868] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.166062] hvc_sysfs: hypervisor is not present [ 7.171903] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.178153] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.185735] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.190030] usb 1-2: Manufacturer: Generic [ 7.196162] hub 1-2:1.0: USB hub found [ 7.196189] ALSA device list: [ 7.201699] No soundcards found. [ 7.201763] hub 1-2:1.0: 4 ports detected [ 7.217647] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.219049] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.225564] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.234359] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.240601] Extcon AUX1(HDMI) enable [ 7.244387] tegradc 15210000.display: disp1 connected to head1->sor [ 7.250827] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.257795] tegradc 15210000.display: DT parsed successfully [ 7.263520] tegradc 15210000.display: Display dc.00000000e20b7f24 registered with id=1 [ 7.271091] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.277367] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.277409] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.290318] tegradc 15210000.display: probed [ 7.295522] tegradc 15210000.display: fb registered [ 7.303929] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.307460] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.309496] Freeing unused kernel memory: 3968K [ 7.315327] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.325822] tegradc 15210000.display: blank - powerdown [ 7.330685] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.332494] Run /init as init process [ 7.338960] Extcon DP: HPD disabled [ 7.346395] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.353135] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.353155] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.365888] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.373874] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.381206] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.386008] usb 2-3: Manufacturer: Generic ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.393538] tegradc 15200000.display: blank - powerdown [ 7.400861] hub 2-3:1.0: USB hub found [ 7.403076] hub 2-3:1.0: 4 ports detected [ 7.419792] Root device found: mmcblk0p1 [ 7.422172] Found dev node: /dev/mmcblk0p1 [ 7.424418] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.434653] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.434658] Extcon AUX1(HDMI) disable [ 7.457384] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.457961] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.459136] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.461386] Rootfs mounted over mmcblk0p1 [ 7.472402] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.472910] tegradc 15200000.display: unblank [ 7.473956] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.474168] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.480310] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.482275] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.486411] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.486415] Extcon AUX1(HDMI) enable [ 7.488970] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.488976] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.490577] Switching from initrd to actual rootfs [ 7.499055] tegradc 15200000.display: sync windows ret = 247 [ 7.546795] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.553940] Extcon HDMI: HPD enabled [ 7.557605] tegradc 15200000.display: hdmi: plugged [ 7.621657] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.623135] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.624548] usb 1-3: Product: Bluetooth Radio [ 7.625836] usb 1-3: Manufacturer: Realtek [ 7.627058] usb 1-3: SerialNumber: 00e04c000001 [ 7.653962] systemd[1]: System time before build time, advancing clock. [ 7.724604] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.729350] systemd[1]: Detected architecture arm64. [ 7.773055] systemd[1]: Set hostname to . [ 7.929847] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.282600] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.284220] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.289806] systemd[1]: Created slice system-modprobe.slice. [ 8.294353] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.298326] systemd[1]: Created slice User and Session Slice. [ 8.301791] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.305843] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.309126] systemd[1]: Reached target User and Group Name Lookups. [ 8.312159] systemd[1]: Reached target Slices. [ 8.315193] systemd[1]: Reached target Swap. [ 8.319169] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.322717] systemd[1]: Listening on Syslog Socket. [ 8.326239] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.329491] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.333531] systemd[1]: Listening on Journal Audit Socket. [ 8.337061] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.340796] systemd[1]: Listening on Journal Socket. [ 8.344428] systemd[1]: Listening on udev Control Socket. [ 8.349355] systemd[1]: Listening on udev Kernel Socket. [ 8.359124] systemd[1]: Mounting Huge Pages File System... [ 8.367416] systemd[1]: Mounting POSIX Message Queue File System... [ 8.375401] systemd[1]: Mounting RPC Pipe File System... [ 8.384064] systemd[1]: Mounting Kernel Debug File System... [ 8.392273] systemd[1]: Mounting Kernel Trace File System... [ 8.401973] systemd[1]: Starting Journal Service... [ 8.410835] systemd[1]: Starting Set the console keyboard layout... [ 8.418631] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.422084] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.428142] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.435895] systemd[1]: Started Nameserver information manager. [ 8.440609] systemd[1]: Reached target Network (Pre). [ 8.447693] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.447873] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.457428] systemd[1]: Starting Load Kernel Modules... [ 8.464855] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.472554] systemd[1]: Starting udev Coldplug all Devices... [ 8.483632] systemd[1]: Mounted Huge Pages File System. [ 8.487468] systemd[1]: Mounted POSIX Message Queue File System. [ 8.491163] systemd[1]: Mounted RPC Pipe File System. [ 8.493818] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.498622] systemd[1]: Mounted Kernel Debug File System. [ 8.499847] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.502488] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.502496] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.502505] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.502510] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.502684] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.502898] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.503044] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.513144] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.513777] systemd[1]: Mounted Kernel Trace File System. [ 8.529879] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.536845] systemd[1]: nvfb-udev.service: Succeeded. [ 8.542004] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.553118] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.564836] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.567593] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.573629] systemd[1]: Starting Load/Save Random Seed... [ 8.582024] systemd[1]: Starting Create System Users... [ 8.618046] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.618046] [ 8.645680] systemd[1]: Finished Load/Save Random Seed. [ 8.652213] systemd[1]: Finished Load Kernel Modules. [ 8.657109] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.663199] systemd[1]: Mounting Kernel Configuration File System... [ 8.671046] systemd[1]: Started OP-TEE Client Supplicant. [ 8.679340] systemd[1]: Starting Apply Kernel Variables... [ 8.690801] systemd[1]: Finished Set the console keyboard layout. [ 8.697562] systemd[1]: Finished Create System Users. [ 8.701757] systemd[1]: Mounted Kernel Configuration File System. [ 8.712798] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.044270] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.051695] imx219 9-0010: board setup failed [ 10.053566] imx219: probe of 9-0010 failed with error -121 [ 10.073190] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.081931] imx219 10-0010: board setup failed [ 10.083978] imx219: probe of 10-0010 failed with error -121 [ 10.138404] hot-surface-alert cooling state: 0 -> 1 [ 10.902134] using random self ethernet address [ 10.904028] using random host ethernet address [ 11.543581] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.545418] Creating 1 MTD partitions on "spi6.0": [ 11.547522] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.368599] using random self ethernet address [ 12.370218] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.824641] nvidia: loading out-of-tree module taints kernel. [ 59.266016] watchdog: watchdog0: watchdog did not stop! [ 59.709120] Trying to unregister non-registered hwtime source [ 62.766827] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.768466] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 1ÿâclk_dt_late initialized noc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä 03ÿâdmce initialized ÿä:ÿâcvc initialized ÿä23:20 UTC 20ÿâavfs_clk_mach_post initialized ÿä22 aÿâavfs_clk_platform_post initialized ÿäarcÿâcvc_late initialized regulator_post initialized ÿäh64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.650] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.652] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.750] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000683] Console: colour dummy device 80x25 [ 0.002113] printk: console [tty0] enabled [ 0.002175] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002211] pid_max: default: 32768 minimum: 301 [ 0.002425] LSM: Security Framework initializing [ 0.002491] Yama: becoming mindful. [ 0.002536] SELinux: Initializing. [ 0.002745] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002790] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005848] rcu: Hierarchical SRCU implementation. [ 0.006198] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006897] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006960] DTB Build time: Aug 10 2022 20:31:49 [ 0.009578] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009875] Remapping and enabling EFI services. [ 0.012333] smp: Bringing up secondary CPUs ... [ 0.041611] Detected PIPT I-cache on CPU1 [ 0.041712] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074746] Detected PIPT I-cache on CPU2 [ 0.074888] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104473] Detected PIPT I-cache on CPU3 [ 0.104611] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134307] Detected PIPT I-cache on CPU4 [ 0.134406] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165466] Detected PIPT I-cache on CPU5 [ 0.165572] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165871] smp: Brought up 1 node, 6 CPUs [ 0.166205] SMP: Total of 6 processors activated. [ 0.166274] CPU features: detected: Privileged Access Never [ 0.166308] CPU features: detected: LSE atomic instructions [ 0.166331] CPU features: detected: User Access Override [ 0.166353] CPU features: detected: 32-bit EL0 Support [ 0.166375] CPU features: detected: RAS Extension Support [ 0.166396] CPU features: detected: CRC32 instructions [ 0.166418] CPU features: detected: 32-bit EL1 Support [ 0.233230] CPU: All CPU(s) started at EL2 [ 0.239416] devtmpfs: initialized [ 0.288295] Registered cp15_barrier emulation handler [ 0.288449] Registered setend emulation handler [ 0.288480] KASLR enabled [ 0.288769] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288811] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290169] pinctrl core: initialized pinctrl subsystem [ 0.291174] SMBIOS 3.0.0 present. [ 0.291210] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291856] NET: Registered protocol family 16 [ 0.293753] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.294482] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295405] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295479] audit: initializing netlink subsys (disabled) [ 0.295781] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296181] thermal_sys: Registered thermal governor 'step_wise' [ 0.296188] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296217] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298399] cpuidle: using governor menu [ 0.298820] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299223] ASID allocator initialised with 32768 entries [ 0.299460] Serial: AMBA PL011 UART driver [ 0.302800] Tegra reboot handler registered. [ 0.378639] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.378843] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.379065] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.379128] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.379271] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.379329] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.379470] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.379527] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.379667] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.379724] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.381946] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.381996] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.382040] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.382081] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.382124] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.382164] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.382215] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.382259] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.382297] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.382335] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.382373] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.382413] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.382450] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.382487] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.382524] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.382560] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.382604] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.382724] mc-err: mcerr ops are set to t19x [ 0.396206] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.396243] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.396268] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.396293] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.403795] ACPI: Interpreter disabled. [ 0.405018] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.406371] iommu: Default domain type: Translated [ 0.406445] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.406836] SCSI subsystem initialized [ 0.407030] usbcore: registered new interface driver usbfs [ 0.407086] usbcore: registered new interface driver hub [ 0.407134] usbcore: registered new device driver usb [ 0.407597] mc: Linux media interface: v0.10 [ 0.407643] videodev: Linux video capture interface: v2.00 [ 0.407983] pps_core: LinuxPPS API ver. 1 registered [ 0.408004] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.408052] PTP clock support registered [ 0.408281] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.408620] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.408723] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.409327] Registered efivars operations [ 0.415148] FPGA manager framework [ 0.415288] Advanced Linux Sound Architecture Driver Initialized. [ 0.415884] Bluetooth: Core ver 2.22 [ 0.415928] NET: Registered protocol family 31 [ 0.415948] Bluetooth: HCI device and connection manager initialized [ 0.415975] Bluetooth: HCI socket layer initialized [ 0.416000] Bluetooth: L2CAP socket layer initialized [ 0.416031] Bluetooth: SCO socket layer initialized [ 0.417602] camchar: rtcpu character device driver loaded [ 0.418397] clocksource: Switched to clocksource arch_sys_counter [ 0.715687] VFS: Disk quotas dquot_6.6.0 [ 0.715790] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.716152] pnp: PnP ACPI: disabled [ 0.729925] la/ptsa driver initialized. [ 0.730051] NET: Registered protocol family 2 [ 0.730213] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.736130] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.736258] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.736540] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.736988] TCP: Hash tables configured (established 65536 bind 65536) [ 0.737123] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.737235] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.737450] NET: Registered protocol family 1 [ 0.738036] RPC: Registered named UNIX socket transport module. [ 0.738061] RPC: Registered udp transport module. [ 0.738079] RPC: Registered tcp transport module. [ 0.738098] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.738135] PCI: CLS 0 bytes, default 64 [ 0.738346] Trying to unpack rootfs image as initramfs... [ 0.928566] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.930837] Freeing initrd memory: 8196K [ 0.935542] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.935623] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.935691] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.936224] kvm [1]: IPA Size Limit: 40 bits [ 0.936853] kvm [1]: vgic interrupt IRQ9 [ 0.937388] kvm [1]: VHE mode initialized successfully [ 0.939575] Initialise system trusted keyrings [ 0.939905] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.948587] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.949580] NFS: Registering the id_resolver key type [ 0.949636] Key type id_resolver registered [ 0.949663] Key type id_legacy registered [ 0.949776] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.949819] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.949877] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.960877] NET: Registered protocol family 38 [ 0.960917] Key type asymmetric registered [ 0.960944] Asymmetric key parser 'x509' registered [ 0.961016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.961324] io scheduler mq-deadline registered [ 0.961384] io scheduler kyber registered [ 0.968382] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.971775] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.971897] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.972016] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.972112] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.972200] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.979163] scrncapt: init (heads:4 wins:6 planes:4) [ 0.979244] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.980698] EINJ: ACPI disabled. [ 0.985116] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.985169] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.985201] tegra-pmc: ### PMC reset level: L1 [ 0.985227] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.985290] tegra-pmc: PMC Prod config success [ 0.991713] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.010004] random: fast init done [ 1.020753] printk: console [ttyTCU0] enabled [ 2.550268] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.554609] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.559192] arm-smmu 10000000.iommu: stage 1 translation [ 2.564557] arm-smmu 10000000.iommu: stage 2 translation [ 2.569808] arm-smmu 10000000.iommu: nested translation [ 2.575399] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.582576] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.594683] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.595694] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.602004] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.609744] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.615061] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.619768] arm-smmu 12000000.iommu: stage 1 translation [ 2.625287] arm-smmu 12000000.iommu: stage 2 translation [ 2.630959] arm-smmu 12000000.iommu: nested translation [ 2.636132] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.643307] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.655406] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.656660] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.662994] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.670905] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.681075] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.683476] tegra_profiler: auth: init [ 2.688016] THERMAL EST: found 3 subdevs [ 2.691126] THERMAL EST num_resources: 0 [ 2.695193] [THERMAL EST subdev 0] [ 2.698229] [THERMAL EST subdev 1] [ 2.701922] [THERMAL EST subdev 2] [ 2.704901] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.711362] THERMAL EST: thz register success. [ 2.715863] THERMAL EST: end of probe, return err: 0 [ 2.721250] nvsciipc: loaded module [ 2.728183] tun: Universal TUN/TAP device driver, 1.6 [ 2.730468] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.736679] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.742287] e1000e: Intel(R) PRO/1000 Network Driver [ 2.747444] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.753503] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.758538] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.765013] PPP generic driver version 2.4.2 [ 2.769264] PPP BSD Compression module registered [ 2.773526] PPP Deflate Compression module registered [ 2.778756] PPP MPPE Compression module registered [ 2.783782] usbcore: registered new interface driver r8152 [ 2.789272] usbcore: registered new interface driver asix [ 2.794629] usbcore: registered new interface driver ax88179_178a [ 2.801021] usbcore: registered new interface driver cdc_ether [ 2.806962] usbcore: registered new interface driver net1080 [ 2.812555] usbcore: registered new interface driver cdc_subset [ 2.818334] usbcore: registered new interface driver zaurus [ 2.824034] usbcore: registered new interface driver cdc_ncm [ 2.829709] usbcore: registered new interface driver aqc111 [ 2.835596] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.841439] ohci-pci: OHCI PCI platform driver [ 2.845966] ohci-platform: OHCI generic platform driver [ 2.851667] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.858101] usbcore: registered new interface driver uas [ 2.862300] usbcore: registered new interface driver usb-storage [ 2.868343] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.874169] mousedev: PS/2 mouse device common for all mice [ 2.879192] usbcore: registered new interface driver xpad [ 2.887100] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.890152] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.897976] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.904222] i2c /dev entries driver [ 2.907579] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.913566] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.918647] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.924282] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.929367] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.935176] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.940328] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.952706] device-mapper: uevent: version 1.0.3 [ 2.953141] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.960311] cpuidle: Initializing cpuidle driver [ 2.964679] sdhci: Secure Digital Host Controller Interface driver [ 2.969528] sdhci: Copyright(c) Pierre Ossman [ 2.973611] Synopsys Designware Multimedia Card Interface Driver [ 2.980047] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.986080] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.986726] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.999236] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.018266] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.027348] vdd-1v0: supplied by regulator-dummy [ 3.032788] vdd-1v8-hs: supplied by regulator-dummy [ 3.037591] vdd-1v8-ls: supplied by regulator-dummy [ 3.042283] vdd-1v8-ao: supplied by regulator-dummy [ 3.046165] vddio-ddr-1v1: supplied by regulator-dummy [ 3.050533] vdd-rtc: supplied by regulator-dummy [ 3.052173] spmic-ldo1: supplied by regulator-dummy [ 3.053317] vdd-ao-3v3: supplied by regulator-dummy [ 3.059405] vddio-emmc-3v3: supplied by regulator-dummy [ 3.065558] spmic-ldo4: supplied by regulator-dummy [ 3.066763] vdd-usb-3v3: supplied by regulator-dummy [ 3.072874] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.079055] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.084628] spmic-ldo8: supplied by vdd-1v8-ls [ 3.086004] gpio-510 (gpio_default): hogged as output/high [ 3.087305] gpio-511 (gpio_default): hogged as output/high [ 3.092583] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.231400] max77686-rtc max77620-rtc: registered as rtc0 [ 3.232363] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.232653] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.945776] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.946843] hid: raw HID events driver (C) Jiri Kosina [ 3.947480] usbcore: registered new interface driver usbhid [ 3.947648] usbhid: USB HID core driver [ 3.949397] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.950572] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.014910] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.090255] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.156 ms) ÿá[ 4.035749] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.036331] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.037598] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.038534] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.040262] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.040854] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.041502] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.043192] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.043615] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.045432] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.052373] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.058045] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.063305] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.070178] denver_knobs_init:MTS_VERSION:55637613 [ 4.083030] t19x_cache tegra-cache: probed [ 4.085931] optee: probing for conduit method. [ 4.087163] optee: revision 3.16 (65cc2218) [ 4.088841] optee: dynamic shared memory is enabled [ 4.090580] optee: initialized driver [ 4.096831] nvpmodel: initialized successfully [ 4.098216] tegra_hv: get_hvd: not initialized yet [ 4.103102] user_ivc_mempool: hypervisor not present [ 4.109071] usbcore: registered new interface driver snd-usb-audio [ 4.115284] u32 classifier [ 4.116494] input device check on [ 4.120389] Actions configured [ 4.123851] Initializing XFRM netlink socket [ 4.128836] NET: Registered protocol family 10 [ 4.135166] Segment Routing with IPv6 [ 4.136378] NET: Registered protocol family 17 [ 4.140659] NET: Registered protocol family 15 [ 4.145065] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.158796] Bluetooth: RFCOMM socket layer initialized [ 4.163101] Bluetooth: RFCOMM ver 1.11 [ 4.167270] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.173074] Bluetooth: HIDP socket layer initialized [ 4.178828] 9pnet: Installing 9P2000 support [ 4.182192] Key type dns_resolver registered [ 4.187934] registered taskstats version 1 [ 4.190951] Loading compiled-in X.509 certificates [ 4.203661] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.206963] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.217390] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.218727] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.227199] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.235951] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.350510] tegra194-pcie 14160000.pcie: Link up [ 4.353185] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.353452] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.353604] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.353837] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.354030] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.354479] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.354905] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.368547] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.369059] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.369590] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.371380] pci 0004:01:00.0: supports D1 D2 [ 4.371588] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.382355] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.382993] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.383260] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.383771] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.384031] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.384226] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.385279] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.392519] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.401230] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.411456] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.416326] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.422204] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.428595] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.437179] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.439031] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.447659] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.456184] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.558558] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.559103] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.559331] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.559485] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.559777] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.559978] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.560341] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.560787] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.576871] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.577214] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.579324] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.580605] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.582034] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.583855] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.584847] pci 0005:00:00.0: Removing from iommu group 7 [ 5.585132] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.616642] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.639331] host1x 13e10000.host1x: initialized [ 5.640887] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.641721] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.643044] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.643738] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.644810] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.645524] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.646678] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.647292] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.651891] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.658825] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.668512] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.675552] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.685763] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.692476] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.702608] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.709743] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.719913] falcon 15340000.vic: Adding to iommu group 17 [ 5.734302] falcon 15340000.vic: initialized [ 5.735669] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.741325] falcon 15380000.nvjpg: initialized [ 5.741869] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.752083] falcon 154c0000.nvenc: initialized [ 5.752740] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.762746] falcon 15a80000.nvenc1: initialized [ 5.763449] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.774004] nvdec 15480000.nvdec: initialized [ 5.774689] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.785159] nvdec 15140000.nvdec1: initialized [ 5.785630] tsec 15500000.tsec: Adding to iommu group 18 [ 5.791211] tsec 15500000.tsec: initialized [ 5.791757] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.799123] tsec 15100000.tsecb: initialized [ 5.802567] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.829106] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.840635] gpio-374 (wifi-enable): hogged as output/high [ 5.841004] gpio-431 (camera-control-output-low): hogged as output/low [ 5.841256] gpio-432 (camera-control-output-low): hogged as output/low [ 5.843075] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.844841] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.845436] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.850619] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.855981] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.861713] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.867270] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.875426] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.883228] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.894589] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.899885] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.905795] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.914703] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.923908] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.930870] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.938491] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.944946] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.954620] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.960577] pva 16000000.pva0: Adding to iommu group 22 [ 5.987091] pva 16000000.pva0: initialized [ 5.992566] pva 16800000.pva1: Adding to iommu group 23 [ 6.004125] pva 16800000.pva1: initialized [ 6.008671] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.020890] nvdla 15880000.nvdla0: initialized [ 6.022271] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.031228] nvdla 158c0000.nvdla1: initialized [ 6.034270] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.034669] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.034686] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.034968] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.035042] tegradccommon 15200000.display-hub: dma mapping done [ 6.036197] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.036580] tegradc 15200000.display: Adding to iommu group 26 [ 6.036630] tegradc 15210000.display: Adding to iommu group 26 [ 6.038876] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.044884] tegradc 15210000.display: disp0 connected to head1->sor [ 6.051063] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.056648] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.062545] tegra_cec 3960000.tegra_cec: probed [ 6.068636] tegradc 15210000.display: DT parsed successfully [ 6.076473] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.080102] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.081039] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.088031] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.091841] generic_infoframe_type: 0x87 [ 6.099716] kfuse 3830000.kfuse: initialized [ 6.106097] tegradc 15200000.display: DT parsed successfully [ 6.113310] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.116432] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.120600] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.148397] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.148886] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.156129] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.162939] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.170188] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.187165] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.188809] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.192868] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.205565] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.206299] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.227776] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.227965] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.231810] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.246780] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.258635] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.263250] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.268588] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.277058] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.285369] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.292105] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.299557] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.307035] usb usb1: Product: xHCI Host Controller [ 6.311739] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.318117] usb usb1: SerialNumber: 3610000.xhci [ 6.323967] hub 1-0:1.0: USB hub found [ 6.326702] hub 1-0:1.0: 4 ports detected [ 6.331371] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.336113] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.343454] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.351294] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.359074] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.366305] usb usb2: Product: xHCI Host Controller [ 6.371517] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.377716] usb usb2: SerialNumber: 3610000.xhci [ 6.383736] hub 2-0:1.0: USB hub found [ 6.386318] hub 2-0:1.0: 4 ports detected [ 6.427921] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.435053] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.436517] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.436696] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.449596] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.450575] tegra194-cpufreq ccplex: probed with BWMGR [ 6.451982] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.452683] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.453260] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.454558] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.462616] tegra194-vi5 15c10000.vi: initialized [ 6.464187] tegradc 15210000.display: disp0 connected to head1->sor [ 6.465661] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.466231] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.472284] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.479585] tegradc 15210000.display: DT parsed successfully [ 6.479765] mmc0: CQHCI version 5.10 [ 6.487561] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.493124] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.493260] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.496969] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.496975] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.496983] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.503210] generic_infoframe_type: 0x87 [ 6.518457] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.524303] tegradc 15200000.display: DT parsed successfully [ 6.529937] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.530759] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.530765] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.574757] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.575260] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.590273] nvethernet 2490000.ethernet: Macsec not supported [ 6.590952] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.597538] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.604175] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.612352] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.613405] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.613520] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.613657] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.614744] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.616333] tegra-se-nvhost 15810000.se: initialized [ 6.621581] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.627507] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.627941] tegradc 15200000.display: vblank syncpt # 12 for dc 0 [ 6.633563] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.640310] tegradc 15200000.display: vpulse3 syncpt # 13 for dc 0 [ 6.648106] tegra-se-nvhost 15820000.se: initialized [ 6.653593] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.660160] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.665654] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.672934] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.678521] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.680641] tegradc 15200000.display: probed [ 6.685300] tegra-se-nvhost 15830000.se: initialized [ 6.706260] mmc0: Command Queue Engine enabled [ 6.708408] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.713006] mmc0: periodic cache flush enabled [ 6.713025] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.713572] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.721203] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.727131] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.783364] Console: switching to colour frame buffer device 240x67 [ 6.783734] tegra-se-nvhost 15840000.se: initialized [ 6.789581] tegradc 15200000.display: fb registered [ 6.789656] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.794537] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.796214] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.797868] tegra_actmon d230000.actmon: in actmon_register()... [ 6.798070] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.798474] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.799053] hvc_sysfs: hypervisor is not present [ 6.814160] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.827886] ALSA device list: [ 6.830436] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.830442] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.830446] usb 1-2: Manufacturer: Generic [ 6.854531] hub 1-2:1.0: USB hub found [ 6.862107] No soundcards found. [ 6.874781] hub 1-2:1.0: 4 ports detected [ 6.878642] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.888428] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.935387] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.956007] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.957340] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.957545] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.958540] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.958729] Extcon AUX1(HDMI) enable [ 6.958976] tegradc 15210000.display: disp1 connected to head1->sor [ 6.959357] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.959687] tegradc 15210000.display: DT parsed successfully [ 6.959887] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.963747] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.969904] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.971692] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.984536] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.991837] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.996732] usb 2-3: Manufacturer: Generic [ 7.006033] tegradc 15210000.display: probed [ 7.006486] tegradc 15210000.display: fb registered [ 7.013286] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.017306] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.019150] Freeing unused kernel memory: 3968K [ 7.025565] hub 2-3:1.0: USB hub found [ 7.033577] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.038637] Run /init as init process [ 7.038900] hub 2-3:1.0: 4 ports detected [ 7.046701] tegradc 15210000.display: blank - powerdown [ 7.052102] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.060452] Extcon DP: HPD disabled [ 7.064130] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.070672] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.076723] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.082654] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.088576] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.090546] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.102928] Root device found: mmcblk0p1 [ 7.107951] Found dev node: /dev/mmcblk0p1 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.111364] tegradc 15200000.display: blank - powerdown [ 7.148213] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.152103] Rootfs mounted over mmcblk0p1 [ 7.156351] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.156355] Extcon AUX1(HDMI) disable [ 7.180099] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.180710] Switching from initrd to actual rootfs [ 7.181049] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.193498] tegradc 15200000.display: unblank [ 7.194606] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.194796] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.200624] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.202568] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.206648] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.206652] Extcon AUX1(HDMI) enable [ 7.219372] tegradc 15200000.display: sync windows ret = 247 [ 7.246803] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.247770] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.248336] Extcon HDMI: HPD enabled [ 7.248350] tegradc 15200000.display: hdmi: plugged [ 7.249942] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.255601] usb 1-3: Product: Bluetooth Radio [ 7.260342] usb 1-3: Manufacturer: Realtek [ 7.264260] usb 1-3: SerialNumber: 00e04c000001 [ 7.344793] systemd[1]: System time before build time, advancing clock. [ 7.415266] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.420344] systemd[1]: Detected architecture arm64. [ 7.467062] systemd[1]: Set hostname to . [ 7.638903] systemd-sysv-generator[245]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.983325] random: systemd: uninitialized urandom read (16 bytes read) [ 7.985142] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.986847] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.992471] systemd[1]: Created slice system-modprobe.slice. [ 7.996181] random: systemd: uninitialized urandom read (16 bytes read) [ 7.998980] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.002224] random: systemd: uninitialized urandom read (16 bytes read) [ 8.004884] systemd[1]: Created slice User and Session Slice. [ 8.008586] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.013071] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.016903] systemd[1]: Reached target User and Group Name Lookups. [ 8.020347] systemd[1]: Reached target Slices. [ 8.023749] systemd[1]: Reached target Swap. [ 8.028074] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.031990] systemd[1]: Listening on Syslog Socket. [ 8.035612] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.039091] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.043590] systemd[1]: Listening on Journal Audit Socket. [ 8.047339] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.051219] systemd[1]: Listening on Journal Socket. [ 8.055096] systemd[1]: Listening on udev Control Socket. [ 8.060748] systemd[1]: Listening on udev Kernel Socket. [ 8.069335] systemd[1]: Mounting Huge Pages File System... [ 8.077723] systemd[1]: Mounting POSIX Message Queue File System... [ 8.085863] systemd[1]: Mounting RPC Pipe File System... [ 8.094605] systemd[1]: Mounting Kernel Debug File System... [ 8.102988] systemd[1]: Mounting Kernel Trace File System... [ 8.112884] systemd[1]: Starting Journal Service... [ 8.121589] systemd[1]: Starting Set the console keyboard layout... [ 8.129994] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.133534] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.139947] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.147880] systemd[1]: Started Nameserver information manager. [ 8.152533] systemd[1]: Reached target Network (Pre). [ 8.159806] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.161680] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.170931] systemd[1]: Starting Load Kernel Modules... [ 8.178809] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.186782] systemd[1]: Starting udev Coldplug all Devices... [ 8.197832] systemd[1]: Mounted Huge Pages File System. [ 8.201663] systemd[1]: Mounted POSIX Message Queue File System. [ 8.205377] systemd[1]: Mounted RPC Pipe File System. [ 8.209195] systemd[1]: Mounted Kernel Debug File System. [ 8.209631] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.210701] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.214058] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.214064] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.214073] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.214076] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.215468] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.216721] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.225405] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.228536] systemd[1]: Mounted Kernel Trace File System. [ 8.232761] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.250599] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.257323] systemd[1]: nvfb-udev.service: Succeeded. [ 8.262071] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.275257] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.287787] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.289558] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.297324] systemd[1]: Starting Load/Save Random Seed... [ 8.305545] systemd[1]: Starting Create System Users... [ 8.336268] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.336268] [ 8.363410] systemd[1]: Finished Create System Users. [ 8.371633] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.379308] systemd[1]: Finished Load Kernel Modules. [ 8.383759] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.390337] systemd[1]: Mounting Kernel Configuration File System... [ 8.391888] random: crng init done [ 8.393348] random: 7 urandom warning(s) missed due to ratelimiting [ 8.401727] systemd[1]: Started OP-TEE Client Supplicant. [ 8.413803] systemd[1]: Starting Apply Kernel Variables... [ 8.424607] systemd[1]: Finished Set the console keyboard layout. [ 8.433949] systemd[1]: Finished Load/Save Random Seed. [ 8.440611] systemd[1]: Finished Create Static Device Nodes in /dev. [ 9.838189] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.844684] imx219 9-0010: board setup failed [ 9.845935] imx219: probe of 9-0010 failed with error -121 [ 9.858194] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.869214] imx219 10-0010: board setup failed [ 9.870520] imx219: probe of 10-0010 failed with error -121 [ 9.981730] hot-surface-alert cooling state: 0 -> 1 [ 10.436800] using random self ethernet address [ 10.455485] using random host ethernet address [ 11.418603] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.420326] Creating 1 MTD partitions on "spi6.0": [ 11.421954] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.087302] using random self ethernet address [ 12.088420] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.827065] nvidia: loading out-of-tree module taints kernel. [ 58.164739] watchdog: watchdog0: watchdog did not stop! [ 58.671322] Trying to unregister non-registered hwtime source [ 61.730571] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.732224] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] tiíÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.610] W> set volts not configured for 'vdd-1v0' [0003.616] W> set volts not configured for 'vdd-1v8-hs' [0003.616] I> retrieved tmds range from prod_list_hdmi_soc [0003.624] E> invalid display type [0003.625] E> cannot find any other nvdisp nodes [0003.642] I> edid read success [0003.654] I> edid read success [0003.655] I> width = 640, height = 480, frequency = 25174825 [0003.655] I> width = 1920, height = 1080, frequency = 148500000 [0003.656] I> width = 1280, height = 768, frequency = 79500000 [0003.656] I> width = 1360, height = 768, frequency = 85500000 [0003.656] I> width = 720, height = 480, frequency = 26973026 [0003.660] I> width = 720, height = 576, frequency = 26973026 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1280, height = 720, frequency = 74175824 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 1920, height = 1080, frequency = 148351648 [0003.689] I> width = 720, height = 480, frequency = 26973026 [0003.694] I> width = 720, height = 576, frequency = 26973026 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 3840, height = 2160, frequency = 296703296 [0003.723] I> width = 4096, height = 2160, frequency = 296703296 [0003.728] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.740] I> hdmi_enable, starting HDMI initialisation [0003.745] I> hdmi_enable, HDMI initialisation complete [0003.754] initializing target [0003.754] calling apps_init() [0003.755] starting app kernel_boot_app [0003.756] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000753] Console: colour dummy device 80x25 [ 0.002170] printk: console [tty0] enabled [ 0.002244] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002285] pid_max: default: 32768 minimum: 301 [ 0.002457] LSM: Security Framework initializing [ 0.002514] Yama: becoming mindful. [ 0.002564] SELinux: Initializing. [ 0.002718] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002781] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005665] rcu: Hierarchical SRCU implementation. [ 0.005911] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006765] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006815] DTB Build time: Aug 10 2022 20:31:49 [ 0.009577] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009879] Remapping and enabling EFI services. [ 0.011755] smp: Bringing up secondary CPUs ... [ 0.041529] Detected PIPT I-cache on CPU1 [ 0.041622] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073020] Detected PIPT I-cache on CPU2 [ 0.073165] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102623] Detected PIPT I-cache on CPU3 [ 0.102761] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132467] Detected PIPT I-cache on CPU4 [ 0.132564] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162366] Detected PIPT I-cache on CPU5 [ 0.162497] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162840] smp: Brought up 1 node, 6 CPUs [ 0.162997] SMP: Total of 6 processors activated. [ 0.163043] CPU features: detected: Privileged Access Never [ 0.163067] CPU features: detected: LSE atomic instructions [ 0.163082] CPU features: detected: User Access Override [ 0.163096] CPU features: detected: 32-bit EL0 Support [ 0.163110] CPU features: detected: RAS Extension Support [ 0.163123] CPU features: detected: CRC32 instructions [ 0.163138] CPU features: detected: 32-bit EL1 Support [ 0.232457] CPU: All CPU(s) started at EL2 [ 0.239464] devtmpfs: initialized [ 0.288041] Registered cp15_barrier emulation handler [ 0.288156] Registered setend emulation handler [ 0.288195] KASLR enabled [ 0.288445] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288468] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289831] pinctrl core: initialized pinctrl subsystem [ 0.290836] SMBIOS 3.0.0 present. [ 0.290883] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291463] NET: Registered protocol family 16 [ 0.293366] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293863] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294565] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294616] audit: initializing netlink subsys (disabled) [ 0.294845] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.295292] thermal_sys: Registered thermal governor 'step_wise' [ 0.295299] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295312] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.297451] cpuidle: using governor menu [ 0.297697] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.298092] ASID allocator initialised with 32768 entries [ 0.298305] Serial: AMBA PL011 UART driver [ 0.301446] Tegra reboot handler registered. [ 0.374756] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.374881] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.375051] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.375097] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.375218] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.375261] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.375377] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.375420] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.375558] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.375601] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.377769] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.377802] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.377830] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.377856] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.377884] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.377910] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.377935] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.377961] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.377986] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.378012] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.378059] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.378087] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.378128] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.378170] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.378197] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.378222] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.378247] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.378346] mc-err: mcerr ops are set to t19x [ 0.390172] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390194] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390206] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390218] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.396487] ACPI: Interpreter disabled. [ 0.397604] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.398896] iommu: Default domain type: Translated [ 0.398966] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.399345] SCSI subsystem initialized [ 0.399502] usbcore: registered new interface driver usbfs [ 0.399542] usbcore: registered new interface driver hub [ 0.399576] usbcore: registered new device driver usb [ 0.399969] mc: Linux media interface: v0.10 [ 0.399996] videodev: Linux video capture interface: v2.00 [ 0.400382] pps_core: LinuxPPS API ver. 1 registered [ 0.400395] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.400417] PTP clock support registered [ 0.400618] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.400945] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401024] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.401600] Registered efivars operations [ 0.407207] FPGA manager framework [ 0.407312] Advanced Linux Sound Architecture Driver Initialized. [ 0.407882] Bluetooth: Core ver 2.22 [ 0.407919] NET: Registered protocol family 31 [ 0.407930] Bluetooth: HCI device and connection manager initialized [ 0.407945] Bluetooth: HCI socket layer initialized [ 0.407960] Bluetooth: L2CAP socket layer initialized [ 0.407980] Bluetooth: SCO socket layer initialized [ 0.410277] camchar: rtcpu character device driver loaded [ 0.411405] clocksource: Switched to clocksource arch_sys_counter [ 0.831291] VFS: Disk quotas dquot_6.6.0 [ 0.831422] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.831898] pnp: PnP ACPI: disabled [ 0.846988] la/ptsa driver initialized. [ 0.847154] NET: Registered protocol family 2 [ 0.847373] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.854974] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.855200] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.855611] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.856242] TCP: Hash tables configured (established 65536 bind 65536) [ 0.856411] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.856582] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.856845] NET: Registered protocol family 1 [ 0.857664] RPC: Registered named UNIX socket transport module. [ 0.857701] RPC: Registered udp transport module. [ 0.857717] RPC: Registered tcp transport module. [ 0.857732] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.857773] PCI: CLS 0 bytes, default 64 [ 0.858121] Trying to unpack rootfs image as initramfs... [ 1.127117] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.130282] Freeing initrd memory: 8196K [ 1.135600] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.135634] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.135679] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.136155] kvm [1]: IPA Size Limit: 40 bits [ 1.136820] kvm [1]: vgic interrupt IRQ9 [ 1.137429] kvm [1]: VHE mode initialized successfully [ 1.139032] Initialise system trusted keyrings [ 1.139431] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.144972] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.145841] NFS: Registering the id_resolver key type [ 1.145882] Key type id_resolver registered [ 1.145896] Key type id_legacy registered [ 1.145982] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.146005] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.146044] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.156415] NET: Registered protocol family 38 [ 1.156444] Key type asymmetric registered [ 1.156459] Asymmetric key parser 'x509' registered [ 1.156525] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.156850] io scheduler mq-deadline registered [ 1.156870] io scheduler kyber registered [ 1.163218] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.166239] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.166329] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.166404] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.166472] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.166541] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.171754] scrncapt: init (heads:4 wins:6 planes:4) [ 1.172062] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.172986] EINJ: ACPI disabled. [ 1.176375] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.176399] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.176413] tegra-pmc: ### PMC reset level: L1 [ 1.176425] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.176473] tegra-pmc: PMC Prod config success [ 1.182056] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.220249] random: fast init done [ 1.221906] printk: console [ttyTCU0] enabled [ 2.740172] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.744357] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.748930] arm-smmu 10000000.iommu: stage 1 translation [ 2.754280] arm-smmu 10000000.iommu: stage 2 translation [ 2.759655] arm-smmu 10000000.iommu: nested translation [ 2.764992] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.772167] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.783120] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.785551] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.792135] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.799857] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.804891] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.809622] arm-smmu 12000000.iommu: stage 1 translation [ 2.815402] arm-smmu 12000000.iommu: stage 2 translation [ 2.820552] arm-smmu 12000000.iommu: nested translation [ 2.826236] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.833424] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.844282] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.846256] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.853098] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.860306] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.870236] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.873261] tegra_profiler: auth: init [ 2.877639] THERMAL EST: found 3 subdevs [ 2.880943] THERMAL EST num_resources: 0 [ 2.884787] [THERMAL EST subdev 0] [ 2.888364] [THERMAL EST subdev 1] [ 2.891778] [THERMAL EST subdev 2] [ 2.894745] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.901198] THERMAL EST: thz register success. [ 2.905722] THERMAL EST: end of probe, return err: 0 [ 2.910759] nvsciipc: loaded module [ 2.918011] tun: Universal TUN/TAP device driver, 1.6 [ 2.920324] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.926590] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.932143] e1000e: Intel(R) PRO/1000 Network Driver [ 2.937270] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.943123] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.948645] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.955009] PPP generic driver version 2.4.2 [ 2.958843] PPP BSD Compression module registered [ 2.963653] PPP Deflate Compression module registered [ 2.968873] PPP MPPE Compression module registered [ 2.973917] usbcore: registered new interface driver r8152 [ 2.979140] usbcore: registered new interface driver asix [ 2.984736] usbcore: registered new interface driver ax88179_178a [ 2.990846] usbcore: registered new interface driver cdc_ether [ 2.996543] usbcore: registered new interface driver net1080 [ 3.002140] usbcore: registered new interface driver cdc_subset [ 3.008186] usbcore: registered new interface driver zaurus [ 3.013876] usbcore: registered new interface driver cdc_ncm [ 3.019560] usbcore: registered new interface driver aqc111 [ 3.025232] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.031529] ohci-pci: OHCI PCI platform driver [ 3.035825] ohci-platform: OHCI generic platform driver [ 3.041841] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.048320] usbcore: registered new interface driver uas [ 3.052142] usbcore: registered new interface driver usb-storage [ 3.058115] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.064332] mousedev: PS/2 mouse device common for all mice [ 3.069022] usbcore: registered new interface driver xpad [ 3.077284] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.080022] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.087567] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.094434] i2c /dev entries driver [ 3.097475] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.103541] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.108700] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.113983] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.119591] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.125086] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.130521] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.143611] device-mapper: uevent: version 1.0.3 [ 3.144066] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.151102] cpuidle: Initializing cpuidle driver [ 3.155154] sdhci: Secure Digital Host Controller Interface driver [ 3.159615] sdhci: Copyright(c) Pierre Ossman [ 3.163711] Synopsys Designware Multimedia Card Interface Driver [ 3.169672] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.175805] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.176455] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.189084] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.207466] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.216628] vdd-1v0: supplied by regulator-dummy [ 3.222043] vdd-1v8-hs: supplied by regulator-dummy [ 3.226730] vdd-1v8-ls: supplied by regulator-dummy [ 3.231435] vdd-1v8-ao: supplied by regulator-dummy [ 3.235376] vddio-ddr-1v1: supplied by regulator-dummy [ 3.239761] vdd-rtc: supplied by regulator-dummy [ 3.241370] spmic-ldo1: supplied by regulator-dummy [ 3.242488] vdd-ao-3v3: supplied by regulator-dummy [ 3.248546] vddio-emmc-3v3: supplied by regulator-dummy [ 3.254692] spmic-ldo4: supplied by regulator-dummy [ 3.255838] vdd-usb-3v3: supplied by regulator-dummy [ 3.261914] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.268021] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.273471] spmic-ldo8: supplied by vdd-1v8-ls [ 3.274850] gpio-510 (gpio_default): hogged as output/high [ 3.276169] gpio-511 (gpio_default): hogged as output/high [ 3.282896] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.421282] max77686-rtc max77620-rtc: registered as rtc0 [ 3.422530] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.422848] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.154064] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.155076] hid: raw HID events driver (C) Jiri Kosina [ 4.156066] usbcore: registered new interface driver usbhid [ 4.156211] usbhid: USB HID core driver [ 4.158588] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.160071] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.221592] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.295530] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 74.747 ms) ÿá[ 4.243962] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.244451] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.245630] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.246301] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.248051] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.248566] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.249146] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.250375] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.250668] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.253054] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.260415] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.266923] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.272152] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.279140] denver_knobs_init:MTS_VERSION:55637613 [ 4.292631] t19x_cache tegra-cache: probed [ 4.295190] optee: probing for conduit method. [ 4.296063] optee: revision 3.16 (65cc2218) [ 4.296924] optee: dynamic shared memory is enabled [ 4.298994] optee: initialized driver [ 4.307300] nvpmodel: initialized successfully [ 4.308502] tegra_hv: get_hvd: not initialized yet [ 4.311302] user_ivc_mempool: hypervisor not present [ 4.318456] usbcore: registered new interface driver snd-usb-audio [ 4.324127] u32 classifier [ 4.325111] input device check on [ 4.328842] Actions configured [ 4.332232] Initializing XFRM netlink socket [ 4.337126] NET: Registered protocol family 10 [ 4.343896] Segment Routing with IPv6 [ 4.344738] NET: Registered protocol family 17 [ 4.349074] NET: Registered protocol family 15 [ 4.353446] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.367164] Bluetooth: RFCOMM socket layer initialized [ 4.371500] Bluetooth: RFCOMM ver 1.11 [ 4.375625] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.381209] Bluetooth: HIDP socket layer initialized [ 4.387600] 9pnet: Installing 9P2000 support [ 4.390565] Key type dns_resolver registered [ 4.396642] registered taskstats version 1 [ 4.399319] Loading compiled-in X.509 certificates [ 4.412246] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.415257] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.424747] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.426953] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.435845] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.443916] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.559768] tegra194-pcie 14160000.pcie: Link up [ 4.562652] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.562888] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.563017] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.563212] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.563451] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.563776] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.564237] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.573894] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.574479] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.574990] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.576524] pci 0004:01:00.0: supports D1 D2 [ 4.576722] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.585352] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.585709] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.585916] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.586442] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.586705] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.588595] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.594784] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.601781] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.610542] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.620539] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.625448] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.630932] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.637394] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.646655] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.648551] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.656662] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.665371] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.780307] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.780891] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.781144] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.781294] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.781566] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.781760] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.782159] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.782558] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.799056] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.799689] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.801574] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.802966] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.804865] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.806569] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.807561] pci 0005:00:00.0: Removing from iommu group 7 [ 5.807851] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.838633] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.860734] host1x 13e10000.host1x: initialized [ 5.862394] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.863610] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.864968] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.865678] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.866623] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.867265] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.868302] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.868932] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.873643] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.880529] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.890142] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.897430] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.907148] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.914616] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.924583] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.931205] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.941098] falcon 15340000.vic: Adding to iommu group 17 [ 5.954858] falcon 15340000.vic: initialized [ 5.955942] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.961508] falcon 15380000.nvjpg: initialized [ 5.961995] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.973519] falcon 154c0000.nvenc: initialized [ 5.974101] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.983469] falcon 15a80000.nvenc1: initialized [ 5.984055] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.997150] nvdec 15480000.nvdec: initialized [ 5.997850] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.007353] nvdec 15140000.nvdec1: initialized [ 6.007973] tsec 15500000.tsec: Adding to iommu group 18 [ 6.013509] tsec 15500000.tsec: initialized [ 6.014110] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.021280] tsec 15100000.tsecb: initialized [ 6.024813] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.049272] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.061167] gpio-374 (wifi-enable): hogged as output/high [ 6.061467] gpio-431 (camera-control-output-low): hogged as output/low [ 6.061726] gpio-432 (camera-control-output-low): hogged as output/low [ 6.063381] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.065121] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.065926] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.072604] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.077719] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.083758] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.089435] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.097759] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.104753] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.115881] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.121610] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.127352] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.136486] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.145458] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.152832] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.160307] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.166790] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.176142] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.182407] pva 16000000.pva0: Adding to iommu group 22 [ 6.208522] pva 16000000.pva0: initialized [ 6.213390] pva 16800000.pva1: Adding to iommu group 23 [ 6.223796] pva 16800000.pva1: initialized [ 6.228538] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.248350] nvdla 15880000.nvdla0: initialized [ 6.249576] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.258316] nvdla 158c0000.nvdla1: initialized [ 6.262272] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.262469] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.262628] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.262655] tegradc 15200000.display: Adding to iommu group 26 [ 6.262930] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.263284] tegradccommon 15200000.display-hub: dma mapping done [ 6.264501] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.266597] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.270692] tegradc 15210000.display: Adding to iommu group 26 [ 6.271245] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.271587] generic_infoframe_type: 0x87 [ 6.271701] tegradc 15200000.display: DT parsed successfully [ 6.271799] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.272403] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.301885] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.307973] tegra_cec 3960000.tegra_cec: probed [ 6.315751] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.315757] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.329451] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.337667] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.342967] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.355093] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.356719] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.372686] kfuse 3830000.kfuse: initialized [ 6.377380] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.377467] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.383296] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.383934] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.403306] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.403855] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.411314] tegradc 15210000.display: disp0 connected to head1->sor [ 6.420312] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.425102] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.431766] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.438188] tegradc 15210000.display: DT parsed successfully [ 6.448451] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.452673] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.466806] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.486866] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.487212] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.490016] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.498634] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.507074] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.513857] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.521415] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.528779] usb usb1: Product: xHCI Host Controller [ 6.533431] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.539722] usb usb1: SerialNumber: 3610000.xhci [ 6.545340] hub 1-0:1.0: USB hub found [ 6.548271] hub 1-0:1.0: 4 ports detected [ 6.552793] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.557942] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.565350] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.573088] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.580880] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.588340] usb usb2: Product: xHCI Host Controller [ 6.593276] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.599511] usb usb2: SerialNumber: 3610000.xhci [ 6.604891] hub 2-0:1.0: USB hub found [ 6.608039] hub 2-0:1.0: 4 ports detected [ 6.648770] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.654579] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.656205] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.656445] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.669633] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.670721] tegra194-cpufreq ccplex: probed with BWMGR [ 6.671825] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.672571] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.673022] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.674286] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.683111] mmc0: CQHCI version 5.10 [ 6.685026] tegra194-vi5 15c10000.vi: initialized [ 6.686502] tegradc 15210000.display: disp0 connected to head1->sor [ 6.687357] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.691695] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.698030] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.705175] tegradc 15210000.display: DT parsed successfully [ 6.713106] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.718484] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.718659] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.725235] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.733067] generic_infoframe_type: 0x87 [ 6.739461] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.746321] tegradc 15200000.display: DT parsed successfully [ 6.750073] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.756751] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.767482] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.775167] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.776714] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.776719] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.776724] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.776727] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.791195] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.797847] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.805893] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.806103] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.815429] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.815624] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.815672] nvethernet 2490000.ethernet: Macsec not supported [ 6.816909] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.817978] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.818095] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.818236] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.819482] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.821059] tegra-se-nvhost 15810000.se: initialized [ 6.826267] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.829813] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.836041] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.841868] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.872580] tegra-se-nvhost 15820000.se: initialized [ 6.882714] tegradc 15200000.display: probed [ 6.888408] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.954817] Console: switching to colour frame buffer device 240x67 [ 6.955074] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.956164] mmc0: Command Queue Engine enabled [ 6.956169] mmc0: periodic cache flush enabled [ 6.956192] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.956774] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.956928] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.960691] tegradc 15200000.display: fb registered [ 6.960724] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.960773] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.961700] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.961916] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.967724] tegra-se-nvhost 15830000.se: initialized [ 7.011243] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.013933] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.018620] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.018625] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.018634] usb 1-2: Manufacturer: Generic [ 7.025124] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.030196] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.031313] hub 1-2:1.0: USB hub found [ 7.032522] hub 1-2:1.0: 4 ports detected [ 7.038533] tegra-se-nvhost 15840000.se: initialized [ 7.044860] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.052777] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.055708] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.056357] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.061156] tegra_actmon d230000.actmon: in actmon_register()... [ 7.066137] Extcon AUX1(HDMI) enable [ 7.075222] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.079077] tegradc 15210000.display: disp1 connected to head1->sor [ 7.083597] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.088275] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.096706] hvc_sysfs: hypervisor is not present [ 7.102157] tegradc 15210000.display: DT parsed successfully [ 7.136307] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.137631] ALSA device list: [ 7.137637] No soundcards found. [ 7.138021] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.181295] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.185796] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.193952] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.193958] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.193965] usb 2-3: Manufacturer: Generic [ 7.200033] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.220746] hub 2-3:1.0: USB hub found [ 7.228820] hub 2-3:1.0: 4 ports detected [ 7.229836] tegradc 15210000.display: probed [ 7.235150] tegradc 15210000.display: fb registered [ 7.243307] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.245261] Freeing unused kernel memory: 3968K [ 7.247353] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.259799] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.259918] tegradc 15200000.display: blank - powerdown [ 7.267636] Run /init as init process [ 7.297318] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.297322] Extcon AUX1(HDMI) disable [ 7.299446] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.320797] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.321673] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.331503] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.331508] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.332923] tegradc 15200000.display: unblank [ 7.333955] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.334147] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.340043] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.341975] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.345936] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.345940] Extcon AUX1(HDMI) enable [ 7.358752] tegradc 15200000.display: sync windows ret = 247 [ 7.390427] tegradc 15210000.display: blank - powerdown [ 7.392092] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.392096] Extcon DP: HPD disabled [ 7.392100] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.392111] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.392121] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.398967] random: crng init done [ 7.415587] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.422760] Extcon HDMI: HPD enabled [ 7.426251] tegradc 15200000.display: hdmi: plugged [ 7.448666] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.450406] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.452035] usb 1-3: Product: Bluetooth Radio [ 7.453559] usb 1-3: Manufacturer: Realtek [ 7.455374] usb 1-3: SerialNumber: 00e04c000001 [ 7.461927] Root device found: mmcblk0p1 [ 7.465936] Found dev node: /dev/mmcblk0p1 [ 7.501836] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.507568] Rootfs mounted over mmcblk0p1 [ 7.551146] Switching from initrd to actual rootfs [ 7.695529] systemd[1]: System time before build time, advancing clock. [ 7.767064] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.771956] systemd[1]: Detected architecture arm64. [ 7.813360] systemd[1]: Set hostname to . [ 7.972261] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.318056] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.319800] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.325496] systemd[1]: Created slice system-modprobe.slice. [ 8.330205] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.334319] systemd[1]: Created slice User and Session Slice. [ 8.337685] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.341931] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.345249] systemd[1]: Reached target User and Group Name Lookups. [ 8.348413] systemd[1]: Reached target Slices. [ 8.351451] systemd[1]: Reached target Swap. [ 8.355367] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.358927] systemd[1]: Listening on Syslog Socket. [ 8.362380] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.365701] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.369797] systemd[1]: Listening on Journal Audit Socket. [ 8.373375] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.378610] systemd[1]: Listening on Journal Socket. [ 8.383915] systemd[1]: Listening on udev Control Socket. [ 8.387323] systemd[1]: Listening on udev Kernel Socket. [ 8.395790] systemd[1]: Mounting Huge Pages File System... [ 8.404163] systemd[1]: Mounting POSIX Message Queue File System... [ 8.412169] systemd[1]: Mounting RPC Pipe File System... [ 8.421068] systemd[1]: Mounting Kernel Debug File System... [ 8.429642] systemd[1]: Mounting Kernel Trace File System... [ 8.439893] systemd[1]: Starting Journal Service... [ 8.448799] systemd[1]: Starting Set the console keyboard layout... [ 8.457207] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.460733] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.467224] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.475271] systemd[1]: Started Nameserver information manager. [ 8.480006] systemd[1]: Reached target Network (Pre). [ 8.486776] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.488734] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.495629] systemd[1]: Starting Load Kernel Modules... [ 8.503538] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.512029] systemd[1]: Starting udev Coldplug all Devices... [ 8.522973] systemd[1]: Mounted Huge Pages File System. [ 8.526682] systemd[1]: Mounted POSIX Message Queue File System. [ 8.530315] systemd[1]: Mounted RPC Pipe File System. [ 8.533462] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.533776] systemd[1]: Mounted Kernel Debug File System. [ 8.539285] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.541613] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.541702] systemd[1]: Mounted Kernel Trace File System. [ 8.543151] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.543165] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.547540] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.547729] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.547924] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.548097] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.548106] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.565242] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.572867] systemd[1]: nvfb-udev.service: Succeeded. [ 8.577111] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.589109] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.601700] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.603506] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.610698] systemd[1]: Starting Load/Save Random Seed... [ 8.628274] systemd[1]: Starting Create System Users... [ 8.649374] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.649374] [ 8.666089] systemd[1]: Finished Load/Save Random Seed. [ 8.679167] systemd[1]: Finished Create System Users. [ 8.685644] systemd[1]: Finished Load Kernel Modules. [ 8.689798] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.697108] systemd[1]: Mounting Kernel Configuration File System... [ 8.704997] systemd[1]: Started OP-TEE Client Supplicant. [ 8.714191] systemd[1]: Starting Apply Kernel Variables... [ 8.721640] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.732097] systemd[1]: Finished Set the console keyboard layout. [ 8.736302] systemd[1]: Mounted Kernel Configuration File System. [ 10.181379] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.187964] imx219 9-0010: board setup failed [ 10.189336] imx219: probe of 9-0010 failed with error -121 [ 10.203853] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.210293] imx219 10-0010: board setup failed [ 10.210389] imx219: probe of 10-0010 failed with error -121 [ 10.281032] hot-surface-alert cooling state: 0 -> 1 [ 11.138930] using random self ethernet address [ 11.150778] using random host ethernet address [ 11.504402] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.504408] Creating 1 MTD partitions on "spi6.0": [ 11.504427] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.441400] using random self ethernet address [ 12.442529] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.851140] nvidia: loading out-of-tree module taints kernel. [ 59.817326] watchdog: watchdog0: watchdog did not stop! [ 60.268223] Trying to unregister non-registered hwtime source [ 63.329645] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.331053] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized noc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 202ÿâavfs_clk_platform_post initialized ÿä2 aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.486] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.619] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.649] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.650] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.723] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.739] I> hdmi_enable, HDMI initialisation complete [0003.748] initializing target [0003.749] calling apps_init() [0003.750] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000646] Console: colour dummy device 80x25 [ 0.002366] printk: console [tty0] enabled [ 0.002429] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002465] pid_max: default: 32768 minimum: 301 [ 0.002705] LSM: Security Framework initializing [ 0.002777] Yama: becoming mindful. [ 0.002831] SELinux: Initializing. [ 0.003022] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003061] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006041] rcu: Hierarchical SRCU implementation. [ 0.006291] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007049] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007118] DTB Build time: Aug 10 2022 20:31:49 [ 0.009862] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010099] Remapping and enabling EFI services. [ 0.012236] smp: Bringing up secondary CPUs ... [ 0.043149] Detected PIPT I-cache on CPU1 [ 0.043241] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072848] Detected PIPT I-cache on CPU2 [ 0.072994] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102629] Detected PIPT I-cache on CPU3 [ 0.102733] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132430] Detected PIPT I-cache on CPU4 [ 0.132532] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162154] Detected PIPT I-cache on CPU5 [ 0.162301] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162705] smp: Brought up 1 node, 6 CPUs [ 0.162856] SMP: Total of 6 processors activated. [ 0.162916] CPU features: detected: Privileged Access Never [ 0.162940] CPU features: detected: LSE atomic instructions [ 0.162954] CPU features: detected: User Access Override [ 0.162967] CPU features: detected: 32-bit EL0 Support [ 0.162979] CPU features: detected: RAS Extension Support [ 0.162991] CPU features: detected: CRC32 instructions [ 0.163004] CPU features: detected: 32-bit EL1 Support [ 0.230977] CPU: All CPU(s) started at EL2 [ 0.237581] devtmpfs: initialized [ 0.287020] Registered cp15_barrier emulation handler [ 0.287156] Registered setend emulation handler [ 0.287176] KASLR enabled [ 0.287476] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287499] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288781] pinctrl core: initialized pinctrl subsystem [ 0.289651] SMBIOS 3.0.0 present. [ 0.289679] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.290285] NET: Registered protocol family 16 [ 0.292234] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292746] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293681] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.293755] audit: initializing netlink subsys (disabled) [ 0.294146] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.294548] thermal_sys: Registered thermal governor 'step_wise' [ 0.294555] thermal_sys: Registered thermal governor 'power_allocator' [ 0.294569] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.296721] cpuidle: using governor menu [ 0.297136] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297601] ASID allocator initialised with 32768 entries [ 0.297830] Serial: AMBA PL011 UART driver [ 0.301000] Tegra reboot handler registered. [ 0.370158] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.370263] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.370466] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.370507] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.370622] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.370660] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.370803] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.370843] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.370965] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.371005] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.373188] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.373220] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.373275] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.373301] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.373327] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.373352] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.373376] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.373402] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.373444] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.373471] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.373495] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.373518] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.373542] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.373565] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.373589] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.373612] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.373635] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.373719] mc-err: mcerr ops are set to t19x [ 0.387004] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.387028] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.387044] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.387057] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.394014] ACPI: Interpreter disabled. [ 0.395334] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.396650] iommu: Default domain type: Translated [ 0.396721] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.397161] SCSI subsystem initialized [ 0.397331] usbcore: registered new interface driver usbfs [ 0.397382] usbcore: registered new interface driver hub [ 0.397437] usbcore: registered new device driver usb [ 0.397882] mc: Linux media interface: v0.10 [ 0.397917] videodev: Linux video capture interface: v2.00 [ 0.398263] pps_core: LinuxPPS API ver. 1 registered [ 0.398283] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.398310] PTP clock support registered [ 0.398539] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.398863] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.398994] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.399590] Registered efivars operations [ 0.404625] FPGA manager framework [ 0.404762] Advanced Linux Sound Architecture Driver Initialized. [ 0.405392] Bluetooth: Core ver 2.22 [ 0.405432] NET: Registered protocol family 31 [ 0.405444] Bluetooth: HCI device and connection manager initialized [ 0.405462] Bluetooth: HCI socket layer initialized [ 0.405481] Bluetooth: L2CAP socket layer initialized [ 0.405506] Bluetooth: SCO socket layer initialized [ 0.407772] camchar: rtcpu character device driver loaded [ 0.408915] clocksource: Switched to clocksource arch_sys_counter [ 0.861176] VFS: Disk quotas dquot_6.6.0 [ 0.861262] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.861710] pnp: PnP ACPI: disabled [ 0.876331] la/ptsa driver initialized. [ 0.876482] NET: Registered protocol family 2 [ 0.876739] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.884506] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.884703] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.885100] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.885738] TCP: Hash tables configured (established 65536 bind 65536) [ 0.885881] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.886023] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.886320] NET: Registered protocol family 1 [ 0.887384] RPC: Registered named UNIX socket transport module. [ 0.887412] RPC: Registered udp transport module. [ 0.887428] RPC: Registered tcp transport module. [ 0.887443] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.887466] PCI: CLS 0 bytes, default 64 [ 0.887791] Trying to unpack rootfs image as initramfs... [ 1.144101] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.147230] Freeing initrd memory: 8196K [ 1.151873] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.151933] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.151970] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.152312] kvm [1]: IPA Size Limit: 40 bits [ 1.152739] kvm [1]: vgic interrupt IRQ9 [ 1.153238] kvm [1]: VHE mode initialized successfully [ 1.154610] Initialise system trusted keyrings [ 1.154892] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.160739] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.161645] NFS: Registering the id_resolver key type [ 1.161683] Key type id_resolver registered [ 1.161699] Key type id_legacy registered [ 1.161789] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.161813] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.161852] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.172083] NET: Registered protocol family 38 [ 1.172108] Key type asymmetric registered [ 1.172124] Asymmetric key parser 'x509' registered [ 1.172174] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.172398] io scheduler mq-deadline registered [ 1.172417] io scheduler kyber registered [ 1.178645] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.181786] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.181865] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.181937] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.182031] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.182103] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.189801] scrncapt: init (heads:4 wins:6 planes:4) [ 1.189827] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.191266] EINJ: ACPI disabled. [ 1.195094] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.195121] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.195161] tegra-pmc: ### PMC reset level: L1 [ 1.195178] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.195243] tegra-pmc: PMC Prod config success [ 1.200582] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.206120] random: fast init done [ 1.206686] printk: console [ttyTCU0] enabled [ 2.758365] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.762879] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.767584] arm-smmu 10000000.iommu: stage 1 translation [ 2.772941] arm-smmu 10000000.iommu: stage 2 translation [ 2.778189] arm-smmu 10000000.iommu: nested translation [ 2.783779] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.790964] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.801443] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.803801] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.810653] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.818347] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.823684] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.828434] arm-smmu 12000000.iommu: stage 1 translation [ 2.833662] arm-smmu 12000000.iommu: stage 2 translation [ 2.839342] arm-smmu 12000000.iommu: nested translation [ 2.844518] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.851702] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.862363] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.864787] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.871382] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.878806] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.889113] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.892037] tegra_profiler: auth: init [ 2.896299] THERMAL EST: found 3 subdevs [ 2.899474] THERMAL EST num_resources: 0 [ 2.903572] [THERMAL EST subdev 0] [ 2.906636] [THERMAL EST subdev 1] [ 2.910319] [THERMAL EST subdev 2] [ 2.913299] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.920051] THERMAL EST: thz register success. [ 2.924258] THERMAL EST: end of probe, return err: 0 [ 2.929326] nvsciipc: loaded module [ 2.936831] tun: Universal TUN/TAP device driver, 1.6 [ 2.939219] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.945055] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.950875] e1000e: Intel(R) PRO/1000 Network Driver [ 2.955548] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.961891] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.967181] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.973417] PPP generic driver version 2.4.2 [ 2.977616] PPP BSD Compression module registered [ 2.982196] PPP Deflate Compression module registered [ 2.987148] PPP MPPE Compression module registered [ 2.992445] usbcore: registered new interface driver r8152 [ 2.997673] usbcore: registered new interface driver asix [ 3.003267] usbcore: registered new interface driver ax88179_178a [ 3.009384] usbcore: registered new interface driver cdc_ether [ 3.015076] usbcore: registered new interface driver net1080 [ 3.020673] usbcore: registered new interface driver cdc_subset [ 3.026744] usbcore: registered new interface driver zaurus [ 3.032415] usbcore: registered new interface driver cdc_ncm [ 3.038099] usbcore: registered new interface driver aqc111 [ 3.044047] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.049815] ohci-pci: OHCI PCI platform driver [ 3.054393] ohci-platform: OHCI generic platform driver [ 3.060298] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.066337] usbcore: registered new interface driver uas [ 3.070402] usbcore: registered new interface driver usb-storage [ 3.076806] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.082523] mousedev: PS/2 mouse device common for all mice [ 3.087817] usbcore: registered new interface driver xpad [ 3.095845] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.098575] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.106082] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.112990] i2c /dev entries driver [ 3.116210] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.121735] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.127038] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.132498] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.137828] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.143321] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.148777] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.162647] device-mapper: uevent: version 1.0.3 [ 3.163073] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.169340] cpuidle: Initializing cpuidle driver [ 3.173079] sdhci: Secure Digital Host Controller Interface driver [ 3.177879] sdhci: Copyright(c) Pierre Ossman [ 3.181989] Synopsys Designware Multimedia Card Interface Driver [ 3.188459] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.194448] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.200211] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.207411] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.228142] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.238050] vdd-1v0: supplied by regulator-dummy [ 3.243665] vdd-1v8-hs: supplied by regulator-dummy [ 3.248598] vdd-1v8-ls: supplied by regulator-dummy [ 3.253414] vdd-1v8-ao: supplied by regulator-dummy [ 3.257372] vddio-ddr-1v1: supplied by regulator-dummy [ 3.262062] vdd-rtc: supplied by regulator-dummy [ 3.263846] spmic-ldo1: supplied by regulator-dummy [ 3.265169] vdd-ao-3v3: supplied by regulator-dummy [ 3.271385] vddio-emmc-3v3: supplied by regulator-dummy [ 3.277738] spmic-ldo4: supplied by regulator-dummy [ 3.279049] vdd-usb-3v3: supplied by regulator-dummy [ 3.285262] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.291514] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.297131] spmic-ldo8: supplied by vdd-1v8-ls [ 3.298663] gpio-510 (gpio_default): hogged as output/high [ 3.300059] gpio-511 (gpio_default): hogged as output/high [ 3.302901] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.440262] max77686-rtc max77620-rtc: registered as rtc0 [ 3.441417] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.441787] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.263865] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.265045] hid: raw HID events driver (C) Jiri Kosina [ 4.265850] usbcore: registered new interface driver usbhid [ 4.265999] usbhid: USB HID core driver [ 4.268239] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.269591] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.049420] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.123699] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.087 ms) ÿá[ 4.354038] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.354555] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.355457] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.356209] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.357886] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.358648] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.359237] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.360713] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.361113] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.364242] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.370264] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.376593] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.381683] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.387841] denver_knobs_init:MTS_VERSION:55637613 [ 4.399169] t19x_cache tegra-cache: probed [ 4.402231] optee: probing for conduit method. [ 4.403025] optee: revision 3.16 (65cc2218) [ 4.404216] optee: dynamic shared memory is enabled [ 4.408831] optee: initialized driver [ 4.415335] nvpmodel: initialized successfully [ 4.416132] tegra_hv: get_hvd: not initialized yet [ 4.420981] user_ivc_mempool: hypervisor not present [ 4.427001] usbcore: registered new interface driver snd-usb-audio [ 4.433692] u32 classifier [ 4.434675] input device check on [ 4.438459] Actions configured [ 4.442261] Initializing XFRM netlink socket [ 4.447243] NET: Registered protocol family 10 [ 4.453397] Segment Routing with IPv6 [ 4.454545] NET: Registered protocol family 17 [ 4.458510] NET: Registered protocol family 15 [ 4.463175] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.476740] Bluetooth: RFCOMM socket layer initialized [ 4.481510] Bluetooth: RFCOMM ver 1.11 [ 4.485119] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.491209] Bluetooth: HIDP socket layer initialized [ 4.497034] 9pnet: Installing 9P2000 support [ 4.500616] Key type dns_resolver registered [ 4.506111] registered taskstats version 1 [ 4.508794] Loading compiled-in X.509 certificates [ 4.523496] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.525419] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.534701] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.537059] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.545327] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.553816] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.668980] tegra194-pcie 14160000.pcie: Link up [ 4.672063] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.672295] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.672436] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.672691] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.673027] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.673464] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.673921] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.688796] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.689523] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.689976] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.691530] pci 0004:01:00.0: supports D1 D2 [ 4.691679] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.704876] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.705416] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.705758] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.706221] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.706478] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.706649] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.706906] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.711239] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.719505] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.730055] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.734162] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.739871] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.746738] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.756177] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.757403] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.766106] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.774330] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.877122] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.877604] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.877782] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.877992] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.878292] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.878486] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.878894] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.879369] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.900208] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.900532] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.902889] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.904405] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.906251] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.907753] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.908768] pci 0005:00:00.0: Removing from iommu group 7 [ 5.909344] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.952696] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.978082] host1x 13e10000.host1x: initialized [ 5.979877] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.981087] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.982289] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.983000] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.984269] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.985089] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.986287] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.986907] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.988142] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.988871] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.990068] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.994359] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.004147] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.011298] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.021253] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.028109] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.037903] falcon 15340000.vic: Adding to iommu group 17 [ 6.052419] falcon 15340000.vic: initialized [ 6.053547] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.058962] falcon 15380000.nvjpg: initialized [ 6.059660] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.071884] falcon 154c0000.nvenc: initialized [ 6.072612] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.080593] falcon 15a80000.nvenc1: initialized [ 6.081318] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.093987] nvdec 15480000.nvdec: initialized [ 6.094652] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.104343] nvdec 15140000.nvdec1: initialized [ 6.104991] tsec 15500000.tsec: Adding to iommu group 18 [ 6.110975] tsec 15500000.tsec: initialized [ 6.111494] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.118927] tsec 15100000.tsecb: initialized [ 6.122856] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.150003] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.164285] gpio-374 (wifi-enable): hogged as output/high [ 6.164580] gpio-431 (camera-control-output-low): hogged as output/low [ 6.164850] gpio-432 (camera-control-output-low): hogged as output/low [ 6.166612] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.169054] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.169692] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.171296] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.174780] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.181318] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.186128] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.195057] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.202023] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.213766] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.218280] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.224161] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.233045] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.242318] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.249774] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.257364] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.263308] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.273345] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.279278] pva 16000000.pva0: Adding to iommu group 22 [ 6.306385] pva 16000000.pva0: initialized [ 6.310889] pva 16800000.pva1: Adding to iommu group 23 [ 6.322789] pva 16800000.pva1: initialized [ 6.326965] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.340192] nvdla 15880000.nvdla0: initialized [ 6.341655] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.357667] nvdla 158c0000.nvdla1: initialized [ 6.360554] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.360866] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.361307] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.361618] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.361901] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.362205] tegradccommon 15200000.display-hub: dma mapping done [ 6.362313] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.362601] tegradc 15200000.display: Adding to iommu group 26 [ 6.363210] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.364231] tegradc 15210000.display: Adding to iommu group 26 [ 6.373368] tegradc 15210000.display: disp0 connected to head1->sor [ 6.374491] tegra_cec 3960000.tegra_cec: probed [ 6.381026] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.387933] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.391851] tegradc 15210000.display: DT parsed successfully [ 6.401294] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.404222] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.410463] kfuse 3830000.kfuse: initialized [ 6.417517] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.425221] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.429412] generic_infoframe_type: 0x87 [ 6.435312] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.435943] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.441886] tegradc 15200000.display: DT parsed successfully [ 6.458481] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.463900] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.474153] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.484973] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.495158] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.503388] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.503476] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.512089] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.521132] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.525996] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.538918] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.540116] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.563673] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.565771] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.566355] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.581540] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.586972] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.590069] random: crng init done [ 6.595944] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.607318] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.614200] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.621699] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.628979] usb usb1: Product: xHCI Host Controller [ 6.633623] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.639702] usb usb1: SerialNumber: 3610000.xhci [ 6.645803] hub 1-0:1.0: USB hub found [ 6.648290] hub 1-0:1.0: 4 ports detected [ 6.653345] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.658097] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.665477] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.673290] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.681031] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.688285] usb usb2: Product: xHCI Host Controller [ 6.693257] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.699732] usb usb2: SerialNumber: 3610000.xhci [ 6.705338] hub 2-0:1.0: USB hub found [ 6.707912] hub 2-0:1.0: 4 ports detected [ 6.749253] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.755185] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.756540] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.756735] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.769942] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.771042] tegra194-cpufreq ccplex: probed with BWMGR [ 6.772278] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.772769] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.773245] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.774473] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.783597] mmc0: CQHCI version 5.10 [ 6.784363] tegra194-vi5 15c10000.vi: initialized [ 6.786725] tegradc 15210000.display: disp0 connected to head1->sor [ 6.787994] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.792012] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.798244] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.805227] tegradc 15210000.display: DT parsed successfully [ 6.813327] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.818717] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.818817] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.825134] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.833245] generic_infoframe_type: 0x87 [ 6.839650] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.846223] tegradc 15200000.display: DT parsed successfully [ 6.850091] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.856926] tegradc 15200000.display: Display dc.000000005837ec8a registered with id=0 [ 6.868809] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.875256] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.884994] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.885287] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.893089] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.899204] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.914520] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.922366] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.928775] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.929040] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.937442] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.943122] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.952535] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.960103] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.962000] tegradc 15200000.display: probed [ 6.986625] nvethernet 2490000.ethernet: Macsec not supported [ 6.993550] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 7.001135] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 7.006071] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.013457] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.021102] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.026352] Console: switching to colour frame buffer device 240x67 [ 7.028877] tegra-se-nvhost 15810000.se: initialized [ 7.032138] tegradc 15200000.display: fb registered [ 7.032213] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.032942] mmc0: Command Queue Engine enabled [ 7.032948] mmc0: periodic cache flush enabled [ 7.032965] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.033559] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.033725] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.037832] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.042372] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.042897] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.043116] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.101748] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.106188] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.108342] tegra-se-nvhost 15820000.se: initialized [ 7.122028] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.123264] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.129359] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.135923] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.150030] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.150407] tegra-se-nvhost 15830000.se: initialized [ 7.156628] Extcon AUX1(HDMI) enable [ 7.156769] tegradc 15210000.display: disp1 connected to head1->sor [ 7.162781] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.165195] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.171620] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.173482] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.174372] tegra-se-nvhost 15840000.se: initialized [ 7.176030] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.177213] tegra_actmon d230000.actmon: in actmon_register()... [ 7.177590] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.177794] tegradc 15210000.display: DT parsed successfully [ 7.177910] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.178210] hvc_sysfs: hypervisor is not present [ 7.184996] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.193433] tegradc 15210000.display: Display dc.00000000d562b10c registered with id=1 [ 7.199586] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.199595] usb 1-2: Manufacturer: Generic [ 7.201971] ALSA device list: [ 7.201978] No soundcards found. [ 7.204277] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.212562] hub 1-2:1.0: USB hub found [ 7.216477] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.223124] tegradc 15210000.display: probed [ 7.228886] hub 1-2:1.0: 4 ports detected [ 7.261847] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.303437] tegradc 15210000.display: fb registered [ 7.303557] tegradc 15200000.display: blank - powerdown [ 7.306834] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.306838] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.306845] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.338281] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.338289] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.338294] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.338298] usb 2-3: Manufacturer: Generic [ 7.339940] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.339944] Extcon AUX1(HDMI) disable [ 7.349068] hub 2-3:1.0: USB hub found [ 7.351212] hub 2-3:1.0: 4 ports detected [ 7.363380] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.364226] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.375600] tegradc 15200000.display: unblank [ 7.376673] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.376859] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.382785] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.384709] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.388688] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.388691] Extcon AUX1(HDMI) enable [ 7.392964] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.401472] tegradc 15200000.display: sync windows ret = 246 [ 7.453231] tegradc 15210000.display: blank - powerdown [ 7.454231] Freeing unused kernel memory: 3968K [ 7.456992] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.458175] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.458180] Extcon DP: HPD disabled [ 7.458184] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.458196] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.458200] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.458221] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.458233] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.463317] Run /init as init process [ 7.517220] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.524408] Extcon HDMI: HPD enabled [ 7.524419] tegradc 15200000.display: hdmi: plugged [ 7.588557] Root device found: mmcblk0p1 [ 7.592045] Found dev node: /dev/mmcblk0p1 [ 7.610054] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.611481] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.612867] usb 1-3: Product: Bluetooth Radio [ 7.614236] usb 1-3: Manufacturer: Realtek [ 7.615507] usb 1-3: SerialNumber: 00e04c000001 [ 7.628568] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.633955] Rootfs mounted over mmcblk0p1 [ 7.663257] Switching from initrd to actual rootfs [ 7.813123] systemd[1]: System time before build time, advancing clock. [ 7.884566] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.889449] systemd[1]: Detected architecture arm64. [ 7.942675] systemd[1]: Set hostname to . [ 8.102908] systemd-sysv-generator[256]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.443399] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.445088] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.450651] systemd[1]: Created slice system-modprobe.slice. [ 8.455125] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.459022] systemd[1]: Created slice User and Session Slice. [ 8.462361] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.466436] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.469861] systemd[1]: Reached target User and Group Name Lookups. [ 8.472955] systemd[1]: Reached target Slices. [ 8.475885] systemd[1]: Reached target Swap. [ 8.479951] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.483716] systemd[1]: Listening on Syslog Socket. [ 8.489740] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.495592] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.502283] systemd[1]: Listening on Journal Audit Socket. [ 8.508335] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.512445] systemd[1]: Listening on Journal Socket. [ 8.516048] systemd[1]: Listening on udev Control Socket. [ 8.519409] systemd[1]: Listening on udev Kernel Socket. [ 8.527692] systemd[1]: Mounting Huge Pages File System... [ 8.535746] systemd[1]: Mounting POSIX Message Queue File System... [ 8.545313] systemd[1]: Mounting RPC Pipe File System... [ 8.554997] systemd[1]: Mounting Kernel Debug File System... [ 8.563117] systemd[1]: Mounting Kernel Trace File System... [ 8.573020] systemd[1]: Starting Journal Service... [ 8.581777] systemd[1]: Starting Set the console keyboard layout... [ 8.589996] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.593434] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.599755] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.607606] systemd[1]: Started Nameserver information manager. [ 8.612566] systemd[1]: Reached target Network (Pre). [ 8.619905] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.621745] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.627997] systemd[1]: Starting Load Kernel Modules... [ 8.636003] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.644208] systemd[1]: Starting udev Coldplug all Devices... [ 8.655073] systemd[1]: Mounted Huge Pages File System. [ 8.659012] systemd[1]: Mounted POSIX Message Queue File System. [ 8.662548] systemd[1]: Mounted RPC Pipe File System. [ 8.667121] systemd[1]: Mounted Kernel Debug File System. [ 8.668130] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.673132] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.674652] systemd[1]: Mounted Kernel Trace File System. [ 8.675302] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.677538] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.677557] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.677566] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.681918] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.682275] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.682467] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.682475] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.692595] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.698390] systemd[1]: nvfb-udev.service: Succeeded. [ 8.702286] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.714290] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.719353] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.721474] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.737192] systemd[1]: Starting Load/Save Random Seed... [ 8.745158] systemd[1]: Starting Create System Users... [ 8.777885] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.777885] [ 8.791854] systemd[1]: Finished Load/Save Random Seed. [ 8.804719] systemd[1]: Finished Create System Users. [ 8.811160] systemd[1]: Finished Load Kernel Modules. [ 8.815361] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.823004] systemd[1]: Mounting Kernel Configuration File System... [ 8.830235] systemd[1]: Started OP-TEE Client Supplicant. [ 8.838813] systemd[1]: Starting Apply Kernel Variables... [ 8.847163] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.857222] systemd[1]: Finished Set the console keyboard layout. [ 8.861232] systemd[1]: Mounted Kernel Configuration File System. [ 10.364344] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.382067] imx219 9-0010: board setup failed [ 10.383332] imx219: probe of 9-0010 failed with error -121 [ 10.396241] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.402752] imx219 10-0010: board setup failed [ 10.402836] imx219: probe of 10-0010 failed with error -121 [ 10.486363] hot-surface-alert cooling state: 0 -> 1 [ 11.570443] using random self ethernet address [ 11.571579] using random host ethernet address [ 11.854228] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.854235] Creating 1 MTD partitions on "spi6.0": [ 11.854246] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.812202] using random self ethernet address [ 12.813826] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.914077] nvidia: loading out-of-tree module taints kernel. [ 59.690741] watchdog: watchdog0: watchdog did not stop! [ 60.129895] Trying to unregister non-registered hwtime source [ 63.187747] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.189327] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERòÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.481] I> register 'maxim' power off handle [0003.483] I> virtual i2c enabled [0003.483] I> registered 'maxim,max20024' pmic [0003.484] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.614] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.631] I> edid read success [0003.643] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.644] I> width = 1920, height = 1080, frequency = 148500000 [0003.644] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.645] I> width = 720, height = 480, frequency = 26973026 [0003.649] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 720, height = 480, frequency = 26973026 [0003.683] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.717] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.743] initializing target [0003.743] calling apps_init() [0003.744] starting app kernel_boot_app [0003.745] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000700] Console: colour dummy device 80x25 [ 0.002224] printk: console [tty0] enabled [ 0.002286] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002321] pid_max: default: 32768 minimum: 301 [ 0.002525] LSM: Security Framework initializing [ 0.002585] Yama: becoming mindful. [ 0.002649] SELinux: Initializing. [ 0.002839] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002878] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006037] rcu: Hierarchical SRCU implementation. [ 0.006284] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006971] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007022] DTB Build time: Aug 10 2022 20:31:49 [ 0.009924] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010232] Remapping and enabling EFI services. [ 0.012734] smp: Bringing up secondary CPUs ... [ 0.041916] Detected PIPT I-cache on CPU1 [ 0.041994] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.076496] Detected PIPT I-cache on CPU2 [ 0.076646] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.106298] Detected PIPT I-cache on CPU3 [ 0.106439] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.136114] Detected PIPT I-cache on CPU4 [ 0.136320] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.166079] Detected PIPT I-cache on CPU5 [ 0.166229] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166570] smp: Brought up 1 node, 6 CPUs [ 0.166821] SMP: Total of 6 processors activated. [ 0.166893] CPU features: detected: Privileged Access Never [ 0.166916] CPU features: detected: LSE atomic instructions [ 0.166931] CPU features: detected: User Access Override [ 0.166946] CPU features: detected: 32-bit EL0 Support [ 0.166960] CPU features: detected: RAS Extension Support [ 0.166973] CPU features: detected: CRC32 instructions [ 0.166987] CPU features: detected: 32-bit EL1 Support [ 0.237173] CPU: All CPU(s) started at EL2 [ 0.243734] devtmpfs: initialized [ 0.290780] Registered cp15_barrier emulation handler [ 0.290936] Registered setend emulation handler [ 0.290956] KASLR enabled [ 0.291268] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291297] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292560] pinctrl core: initialized pinctrl subsystem [ 0.293544] SMBIOS 3.0.0 present. [ 0.293586] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294164] NET: Registered protocol family 16 [ 0.296043] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296545] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297535] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297598] audit: initializing netlink subsys (disabled) [ 0.297873] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.298282] thermal_sys: Registered thermal governor 'step_wise' [ 0.298289] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298303] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300644] cpuidle: using governor menu [ 0.300940] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.301400] ASID allocator initialised with 32768 entries [ 0.301628] Serial: AMBA PL011 UART driver [ 0.304692] Tegra reboot handler registered. [ 0.371721] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.371891] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.372068] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.372114] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.372238] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.372316] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.372459] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.372502] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372616] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372657] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.374960] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.374997] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.375069] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.375116] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.375155] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375184] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.375212] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375239] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375265] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375292] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.375318] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.375344] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.375370] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.375396] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.375438] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.375477] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.375521] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.375639] mc-err: mcerr ops are set to t19x [ 0.386852] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.386875] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.386888] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.386919] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.393679] ACPI: Interpreter disabled. [ 0.394819] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.395955] iommu: Default domain type: Translated [ 0.396011] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.396360] SCSI subsystem initialized [ 0.396531] usbcore: registered new interface driver usbfs [ 0.396573] usbcore: registered new interface driver hub [ 0.396611] usbcore: registered new device driver usb [ 0.396977] mc: Linux media interface: v0.10 [ 0.397009] videodev: Linux video capture interface: v2.00 [ 0.397293] pps_core: LinuxPPS API ver. 1 registered [ 0.397306] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.397328] PTP clock support registered [ 0.397534] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.397848] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.397952] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.398527] Registered efivars operations [ 0.403764] FPGA manager framework [ 0.403865] Advanced Linux Sound Architecture Driver Initialized. [ 0.404402] Bluetooth: Core ver 2.22 [ 0.404451] NET: Registered protocol family 31 [ 0.404467] Bluetooth: HCI device and connection manager initialized [ 0.404488] Bluetooth: HCI socket layer initialized [ 0.404504] Bluetooth: L2CAP socket layer initialized [ 0.404525] Bluetooth: SCO socket layer initialized [ 0.405944] camchar: rtcpu character device driver loaded [ 0.406666] clocksource: Switched to clocksource arch_sys_counter [ 0.692305] VFS: Disk quotas dquot_6.6.0 [ 0.692384] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.692752] pnp: PnP ACPI: disabled [ 0.704962] la/ptsa driver initialized. [ 0.705079] NET: Registered protocol family 2 [ 0.705234] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.710161] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.710226] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.710525] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.710960] TCP: Hash tables configured (established 65536 bind 65536) [ 0.711077] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.711165] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.711374] NET: Registered protocol family 1 [ 0.711980] RPC: Registered named UNIX socket transport module. [ 0.712000] RPC: Registered udp transport module. [ 0.712010] RPC: Registered tcp transport module. [ 0.712019] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.712033] PCI: CLS 0 bytes, default 64 [ 0.712243] Trying to unpack rootfs image as initramfs... [ 0.900570] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.902940] Freeing initrd memory: 8196K [ 0.906440] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.906466] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.906489] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.906825] kvm [1]: IPA Size Limit: 40 bits [ 0.907313] kvm [1]: vgic interrupt IRQ9 [ 0.907848] kvm [1]: VHE mode initialized successfully [ 0.909133] Initialise system trusted keyrings [ 0.909460] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.914312] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.915137] NFS: Registering the id_resolver key type [ 0.915163] Key type id_resolver registered [ 0.915173] Key type id_legacy registered [ 0.915250] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.915269] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.915295] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.926403] NET: Registered protocol family 38 [ 0.926440] Key type asymmetric registered [ 0.926451] Asymmetric key parser 'x509' registered [ 0.926498] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.926716] io scheduler mq-deadline registered [ 0.926730] io scheduler kyber registered [ 0.931145] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.933374] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.933434] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.933484] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.933534] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.933584] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.938275] scrncapt: init (heads:4 wins:6 planes:4) [ 0.938447] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.939255] EINJ: ACPI disabled. [ 0.941698] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.941718] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.941728] tegra-pmc: ### PMC reset level: L1 [ 0.941737] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.941778] tegra-pmc: PMC Prod config success [ 0.946693] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.430231] random: fast init done [ 2.497252] printk: console [ttyTCU0] enabled [ 2.502961] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.508135] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.512661] arm-smmu 10000000.iommu: stage 1 translation [ 2.518177] arm-smmu 10000000.iommu: stage 2 translation [ 2.523688] arm-smmu 10000000.iommu: nested translation [ 2.528788] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.536209] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.546855] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.549315] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.555900] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.563178] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.568940] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.573654] arm-smmu 12000000.iommu: stage 1 translation [ 2.578905] arm-smmu 12000000.iommu: stage 2 translation [ 2.584587] arm-smmu 12000000.iommu: nested translation [ 2.590027] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.597190] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.607830] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.610304] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.616901] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.624265] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.633934] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.637359] tegra_profiler: auth: init [ 2.641300] THERMAL EST: found 3 subdevs [ 2.644724] THERMAL EST num_resources: 0 [ 2.648826] [THERMAL EST subdev 0] [ 2.651890] [THERMAL EST subdev 1] [ 2.655547] [THERMAL EST subdev 2] [ 2.658520] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.665292] THERMAL EST: thz register success. [ 2.669243] THERMAL EST: end of probe, return err: 0 [ 2.674855] nvsciipc: loaded module [ 2.681527] tun: Universal TUN/TAP device driver, 1.6 [ 2.684279] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.690316] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.696140] e1000e: Intel(R) PRO/1000 Network Driver [ 2.700790] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.706878] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.712166] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.718552] PPP generic driver version 2.4.2 [ 2.722915] PPP BSD Compression module registered [ 2.727142] PPP Deflate Compression module registered [ 2.732385] PPP MPPE Compression module registered [ 2.737675] usbcore: registered new interface driver r8152 [ 2.743186] usbcore: registered new interface driver asix [ 2.748238] usbcore: registered new interface driver ax88179_178a [ 2.754627] usbcore: registered new interface driver cdc_ether [ 2.760573] usbcore: registered new interface driver net1080 [ 2.765910] usbcore: registered new interface driver cdc_subset [ 2.771989] usbcore: registered new interface driver zaurus [ 2.777909] usbcore: registered new interface driver cdc_ncm [ 2.783600] usbcore: registered new interface driver aqc111 [ 2.788973] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.795354] ohci-pci: OHCI PCI platform driver [ 2.799356] ohci-platform: OHCI generic platform driver [ 2.805300] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.811574] usbcore: registered new interface driver uas [ 2.815898] usbcore: registered new interface driver usb-storage [ 2.822005] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.827621] mousedev: PS/2 mouse device common for all mice [ 2.833059] usbcore: registered new interface driver xpad [ 2.840681] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.843846] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.851406] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.858123] i2c /dev entries driver [ 2.861213] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.867279] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.872333] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.877980] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.883067] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.888781] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.894219] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.906759] device-mapper: uevent: version 1.0.3 [ 2.907199] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.914247] cpuidle: Initializing cpuidle driver [ 2.918529] sdhci: Secure Digital Host Controller Interface driver [ 2.923146] sdhci: Copyright(c) Pierre Ossman [ 2.927245] Synopsys Designware Multimedia Card Interface Driver [ 2.933679] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.939762] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.940369] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.952840] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.972328] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.981527] vdd-1v0: supplied by regulator-dummy [ 2.986979] vdd-1v8-hs: supplied by regulator-dummy [ 2.991799] vdd-1v8-ls: supplied by regulator-dummy [ 2.996534] vdd-1v8-ao: supplied by regulator-dummy [ 3.000380] vddio-ddr-1v1: supplied by regulator-dummy [ 3.004803] vdd-rtc: supplied by regulator-dummy [ 3.006528] spmic-ldo1: supplied by regulator-dummy [ 3.007755] vdd-ao-3v3: supplied by regulator-dummy [ 3.013928] vddio-emmc-3v3: supplied by regulator-dummy [ 3.020191] spmic-ldo4: supplied by regulator-dummy [ 3.021396] vdd-usb-3v3: supplied by regulator-dummy [ 3.027516] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.033675] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.039179] spmic-ldo8: supplied by vdd-1v8-ls [ 3.040570] gpio-510 (gpio_default): hogged as output/high [ 3.041878] gpio-511 (gpio_default): hogged as output/high [ 3.046504] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.185156] max77686-rtc max77620-rtc: registered as rtc0 [ 3.186426] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.186769] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.930749] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.931797] hid: raw HID events driver (C) Jiri Kosina [ 3.932554] usbcore: registered new interface driver usbhid [ 3.932696] usbhid: USB HID core driver [ 3.934421] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.935725] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.012933] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.088122] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.997 ms) ÿá[ 4.021075] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.021829] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.023118] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.023850] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.025708] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.026428] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.027164] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.028913] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.029160] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.031185] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.037620] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.044192] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.048506] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.056268] denver_knobs_init:MTS_VERSION:55637613 [ 4.069017] t19x_cache tegra-cache: probed [ 4.074188] optee: probing for conduit method. [ 4.075189] optee: revision 3.16 (65cc2218) [ 4.076492] optee: dynamic shared memory is enabled [ 4.077863] optee: initialized driver [ 4.082482] nvpmodel: initialized successfully [ 4.083484] tegra_hv: get_hvd: not initialized yet [ 4.087882] user_ivc_mempool: hypervisor not present [ 4.094512] usbcore: registered new interface driver snd-usb-audio [ 4.100732] u32 classifier [ 4.101615] input device check on [ 4.105556] Actions configured [ 4.109074] Initializing XFRM netlink socket [ 4.114070] NET: Registered protocol family 10 [ 4.121073] Segment Routing with IPv6 [ 4.121399] NET: Registered protocol family 17 [ 4.125522] NET: Registered protocol family 15 [ 4.130166] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.144188] Bluetooth: RFCOMM socket layer initialized [ 4.148313] Bluetooth: RFCOMM ver 1.11 [ 4.152114] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.157911] Bluetooth: HIDP socket layer initialized [ 4.163826] 9pnet: Installing 9P2000 support [ 4.167415] Key type dns_resolver registered [ 4.173213] registered taskstats version 1 [ 4.175800] Loading compiled-in X.509 certificates [ 4.189499] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.191950] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.202182] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.204023] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.212520] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.220757] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.338720] tegra194-pcie 14160000.pcie: Link up [ 4.341746] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.342013] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.342171] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.342405] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.342631] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.343053] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.343488] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.356776] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.357288] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.357722] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.359486] pci 0004:01:00.0: supports D1 D2 [ 4.359736] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.369532] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.369944] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.370280] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.371006] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.371306] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.371481] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.373322] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.381264] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.389928] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.400062] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.404596] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.409989] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.416835] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.426809] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.427219] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.435725] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.444527] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.550840] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.551658] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.551919] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.552086] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.552327] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.552559] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.552965] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.553420] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.572486] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.572915] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.575238] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.576813] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.578987] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.580755] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.581751] pci 0005:00:00.0: Removing from iommu group 7 [ 5.582175] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.613672] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.637086] host1x 13e10000.host1x: initialized [ 5.639043] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.640001] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.641142] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.641866] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.642948] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.643563] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.644368] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.645010] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.645897] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.651193] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.661048] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.667799] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.677914] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.685095] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.695075] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.701963] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.711575] falcon 15340000.vic: Adding to iommu group 17 [ 5.726573] falcon 15340000.vic: initialized [ 5.727695] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.733113] falcon 15380000.nvjpg: initialized [ 5.733813] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.744578] falcon 154c0000.nvenc: initialized [ 5.745186] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.754372] falcon 15a80000.nvenc1: initialized [ 5.755001] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.767901] nvdec 15480000.nvdec: initialized [ 5.768516] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.778361] nvdec 15140000.nvdec1: initialized [ 5.778990] tsec 15500000.tsec: Adding to iommu group 18 [ 5.784572] tsec 15500000.tsec: initialized [ 5.785062] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.791666] tsec 15100000.tsecb: initialized [ 5.795463] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.820748] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.833022] gpio-374 (wifi-enable): hogged as output/high [ 5.833400] gpio-431 (camera-control-output-low): hogged as output/low [ 5.833665] gpio-432 (camera-control-output-low): hogged as output/low [ 5.835553] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.837488] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.838074] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.843115] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.848181] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.854273] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.859872] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.868735] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.875605] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.886824] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.892276] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.898143] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.907028] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.916350] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.923277] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.930801] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.937290] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.946755] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.953175] pva 16000000.pva0: Adding to iommu group 22 [ 5.980101] pva 16000000.pva0: initialized [ 5.985608] pva 16800000.pva1: Adding to iommu group 23 [ 5.996464] pva 16800000.pva1: initialized [ 6.001695] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.013798] nvdla 15880000.nvdla0: initialized [ 6.015210] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.024457] nvdla 158c0000.nvdla1: initialized [ 6.027565] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.027788] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.027903] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.027970] tegradccommon 15200000.display-hub: dma mapping done [ 6.028184] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.029727] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.029803] tegradc 15200000.display: Adding to iommu group 26 [ 6.030019] tegradc 15210000.display: Adding to iommu group 26 [ 6.031736] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.039694] tegradc 15210000.display: disp0 connected to head1->sor [ 6.043265] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.049637] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.054817] tegra_cec 3960000.tegra_cec: probed [ 6.060724] tegradc 15210000.display: DT parsed successfully [ 6.069533] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.072555] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.080960] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.085234] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.092595] kfuse 3830000.kfuse: initialized [ 6.099182] generic_infoframe_type: 0x87 [ 6.105703] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.109252] tegradc 15200000.display: DT parsed successfully [ 6.113202] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.119786] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.125952] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.146838] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.147599] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.154307] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.164974] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.171259] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.185714] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.186481] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.190993] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.206404] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.207919] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.223832] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.233016] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.240926] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.245511] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.245554] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.245631] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.246807] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.277910] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.284396] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.292181] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.299373] usb usb1: Product: xHCI Host Controller [ 6.304048] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.310241] usb usb1: SerialNumber: 3610000.xhci [ 6.316430] hub 1-0:1.0: USB hub found [ 6.319082] hub 1-0:1.0: 4 ports detected [ 6.323731] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.328455] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.335807] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.343882] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.351376] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.358720] usb usb2: Product: xHCI Host Controller [ 6.363884] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.370085] usb usb2: SerialNumber: 3610000.xhci [ 6.375701] hub 2-0:1.0: USB hub found [ 6.378370] hub 2-0:1.0: 4 ports detected [ 6.422164] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.428264] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.429324] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.429533] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.442632] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.443710] tegra194-cpufreq ccplex: probed with BWMGR [ 6.444993] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.445633] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.446184] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.447544] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.455538] tegra194-vi5 15c10000.vi: initialized [ 6.457196] tegradc 15210000.display: disp0 connected to head1->sor [ 6.458500] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.458547] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.465905] tegradc 15210000.display: DT parsed successfully [ 6.472008] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.477550] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.485530] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.493565] mmc0: CQHCI version 5.10 [ 6.493679] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.493724] generic_infoframe_type: 0x87 [ 6.493825] tegradc 15200000.display: DT parsed successfully [ 6.493907] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.499955] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.499973] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.499981] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.499987] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.506758] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.509969] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.513646] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.519658] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.555846] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.561982] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.570322] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.570599] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.578310] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.582966] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.584882] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.598860] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.615042] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.622568] nvethernet 2490000.ethernet: Macsec not supported [ 6.632988] tegradc 15200000.display: probed [ 6.638758] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.671874] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.676390] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.683386] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.691724] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.691921] mmc0: Command Queue Engine enabled [ 6.697796] tegra-se-nvhost 15810000.se: initialized [ 6.700870] mmc0: periodic cache flush enabled [ 6.700909] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.701581] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.710512] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.716991] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.722090] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.741198] Console: switching to colour frame buffer device 240x67 [ 6.741853] tegra-se-nvhost 15820000.se: initialized [ 6.747351] tegradc 15200000.display: fb registered [ 6.747418] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.753924] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.769669] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.775704] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.776208] tegra-se-nvhost 15830000.se: initialized [ 6.786271] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.793262] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.798746] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.798858] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.806416] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.813321] tegra-se-nvhost 15840000.se: initialized [ 6.820860] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.820866] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.820870] usb 1-2: Manufacturer: Generic [ 6.841834] hub 1-2:1.0: USB hub found [ 6.846957] hub 1-2:1.0: 4 ports detected [ 6.847469] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.857838] tegra_actmon d230000.actmon: in actmon_register()... [ 6.862411] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.867744] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.869783] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.876094] hvc_sysfs: hypervisor is not present [ 6.911604] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.916686] ALSA device list: [ 6.916791] No soundcards found. [ 6.916885] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.917110] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.917929] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.925089] Extcon AUX1(HDMI) enable [ 6.925224] tegradc 15210000.display: disp1 connected to head1->sor [ 6.935245] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.942711] tegradc 15210000.display: DT parsed successfully [ 6.948161] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.956204] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.962332] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.968857] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.975855] tegradc 15210000.display: probed [ 6.976773] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.988754] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.993124] usb 2-3: Manufacturer: Generic [ 6.993133] tegradc 15210000.display: fb registered [ 7.005606] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.008043] hub 2-3:1.0: USB hub found [ 7.009838] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.010520] Freeing unused kernel memory: 3968K [ 7.016012] hub 2-3:1.0: 4 ports detected [ 7.021567] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.035560] tegradc 15210000.display: blank - powerdown [ 7.040565] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.042844] Run /init as init process [ 7.048625] Extcon DP: HPD disabled [ 7.055782] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.055793] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.068631] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.070703] tegra_cec 3960000.tegra_cec: physical address: 10:00. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.081826] tegradc 15200000.display: blank - powerdown [ 7.086778] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.120166] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.120171] Extcon AUX1(HDMI) disable [ 7.141013] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.141018] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.143495] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.144358] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.155621] tegradc 15200000.display: unblank [ 7.156655] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.156839] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.162780] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.164640] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.168771] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.168775] Extcon AUX1(HDMI) enable [ 7.181391] tegradc 15200000.display: sync windows ret = 247 [ 7.210134] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.211670] Extcon HDMI: HPD enabled [ 7.213080] tegradc 15200000.display: hdmi: plugged [ 7.235948] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.237507] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.239096] usb 1-3: Product: Bluetooth Radio [ 7.240496] usb 1-3: Manufacturer: Realtek [ 7.242413] usb 1-3: SerialNumber: 00e04c000001 [ 7.267643] Root device found: mmcblk0p1 [ 7.271192] Found dev node: /dev/mmcblk0p1 [ 7.308292] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.314120] Rootfs mounted over mmcblk0p1 [ 7.357968] Switching from initrd to actual rootfs [ 7.502206] systemd[1]: System time before build time, advancing clock. [ 7.574976] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.580038] systemd[1]: Detected architecture arm64. [ 7.625901] systemd[1]: Set hostname to . [ 7.800667] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.152368] random: systemd: uninitialized urandom read (16 bytes read) [ 8.154159] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.155894] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.161799] systemd[1]: Created slice system-modprobe.slice. [ 8.165624] random: systemd: uninitialized urandom read (16 bytes read) [ 8.168457] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.171834] random: systemd: uninitialized urandom read (16 bytes read) [ 8.174598] systemd[1]: Created slice User and Session Slice. [ 8.178451] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.182962] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.186546] systemd[1]: Reached target User and Group Name Lookups. [ 8.189966] systemd[1]: Reached target Slices. [ 8.193245] systemd[1]: Reached target Swap. [ 8.197424] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.201249] systemd[1]: Listening on Syslog Socket. [ 8.205020] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.208591] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.213099] systemd[1]: Listening on Journal Audit Socket. [ 8.216880] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.220842] systemd[1]: Listening on Journal Socket. [ 8.224821] systemd[1]: Listening on udev Control Socket. [ 8.228534] systemd[1]: Listening on udev Kernel Socket. [ 8.237136] systemd[1]: Mounting Huge Pages File System... [ 8.245765] systemd[1]: Mounting POSIX Message Queue File System... [ 8.255623] systemd[1]: Mounting RPC Pipe File System... [ 8.265666] systemd[1]: Mounting Kernel Debug File System... [ 8.274405] systemd[1]: Mounting Kernel Trace File System... [ 8.284923] systemd[1]: Starting Journal Service... [ 8.294338] systemd[1]: Starting Set the console keyboard layout... [ 8.302982] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.306630] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.313281] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.321326] systemd[1]: Started Nameserver information manager. [ 8.325407] systemd[1]: Reached target Network (Pre). [ 8.332140] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.333998] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.340947] systemd[1]: Starting Load Kernel Modules... [ 8.348857] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.356753] systemd[1]: Starting udev Coldplug all Devices... [ 8.367926] systemd[1]: Mounted Huge Pages File System. [ 8.371709] systemd[1]: Mounted POSIX Message Queue File System. [ 8.375289] systemd[1]: Mounted RPC Pipe File System. [ 8.377426] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.382864] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.383904] systemd[1]: Mounted Kernel Debug File System. [ 8.385193] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.387312] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.387325] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.387330] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.387553] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.387754] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.387915] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.387923] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.411847] systemd[1]: Mounted Kernel Trace File System. [ 8.419234] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.426200] systemd[1]: nvfb-udev.service: Succeeded. [ 8.430909] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.443284] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.455618] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.457336] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.464823] systemd[1]: Starting Load/Save Random Seed... [ 8.473423] systemd[1]: Starting Create System Users... [ 8.486319] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.486319] [ 8.522988] systemd[1]: Finished Load Kernel Modules. [ 8.531152] systemd[1]: Finished Create System Users. [ 8.535425] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.541855] systemd[1]: Mounting Kernel Configuration File System... [ 8.550189] systemd[1]: Started OP-TEE Client Supplicant. [ 8.558703] systemd[1]: Starting Apply Kernel Variables... [ 8.566802] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.577550] systemd[1]: Finished Set the console keyboard layout. [ 8.581877] systemd[1]: Mounted Kernel Configuration File System. [ 9.982717] random: crng init done [ 9.984082] random: 7 urandom warning(s) missed due to ratelimiting [ 10.048129] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.053385] imx219 9-0010: board setup failed [ 10.053485] imx219: probe of 9-0010 failed with error -121 [ 10.071582] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.078028] imx219 10-0010: board setup failed [ 10.109057] imx219: probe of 10-0010 failed with error -121 [ 10.134768] hot-surface-alert cooling state: 0 -> 1 [ 11.213874] using random self ethernet address [ 11.215208] using random host ethernet address [ 11.485550] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.485557] Creating 1 MTD partitions on "spi6.0": [ 11.485567] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.533604] using random self ethernet address [ 12.536179] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.198106] nvidia: loading out-of-tree module taints kernel. [ 59.764362] watchdog: watchdog0: watchdog did not stop! [ 60.287065] Trying to unregister non-registered hwtime source [ 63.349316] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.350903] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR]ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNIÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäNG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> hdmi cable connected [0003.611] W> set volts not configured for 'vdd-1v0' [0003.618] W> set volts not configured for 'vdd-1v8-hs' [0003.618] I> retrieved tmds range from prod_list_hdmi_soc [0003.626] E> invalid display type [0003.627] E> cannot find any other nvdisp nodes [0003.643] I> edid read success [0003.656] I> edid read success [0003.656] I> width = 640, height = 480, frequency = 25174825 [0003.657] I> width = 1920, height = 1080, frequency = 148500000 [0003.657] I> width = 1280, height = 768, frequency = 79500000 [0003.657] I> width = 1360, height = 768, frequency = 85500000 [0003.658] I> width = 720, height = 480, frequency = 26973026 [0003.662] I> width = 720, height = 576, frequency = 26973026 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1280, height = 720, frequency = 74175824 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 1920, height = 1080, frequency = 148351648 [0003.690] I> width = 720, height = 480, frequency = 26973026 [0003.696] I> width = 720, height = 576, frequency = 26973026 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 3840, height = 2160, frequency = 296703296 [0003.724] I> width = 4096, height = 2160, frequency = 296703296 [0003.730] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.741] I> hdmi_enable, starting HDMI initialisation [0003.746] I> hdmi_enable, HDMI initialisation complete [0003.755] initializing target [0003.756] calling apps_init() [0003.757] starting app kernel_boot_app [0003.757] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b08c0000-0x00000000c08c0000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000696] Console: colour dummy device 80x25 [ 0.002146] printk: console [tty0] enabled [ 0.002216] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002253] pid_max: default: 32768 minimum: 301 [ 0.002418] LSM: Security Framework initializing [ 0.002474] Yama: becoming mindful. [ 0.002522] SELinux: Initializing. [ 0.002728] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002767] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006191] rcu: Hierarchical SRCU implementation. [ 0.006478] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007142] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007207] DTB Build time: Aug 10 2022 20:31:49 [ 0.009917] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010166] Remapping and enabling EFI services. [ 0.012191] smp: Bringing up secondary CPUs ... [ 0.043275] Detected PIPT I-cache on CPU1 [ 0.043350] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072956] Detected PIPT I-cache on CPU2 [ 0.073106] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102629] Detected PIPT I-cache on CPU3 [ 0.102829] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132508] Detected PIPT I-cache on CPU4 [ 0.132626] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162239] Detected PIPT I-cache on CPU5 [ 0.162395] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162759] smp: Brought up 1 node, 6 CPUs [ 0.162972] SMP: Total of 6 processors activated. [ 0.163067] CPU features: detected: Privileged Access Never [ 0.163090] CPU features: detected: LSE atomic instructions [ 0.163103] CPU features: detected: User Access Override [ 0.163117] CPU features: detected: 32-bit EL0 Support [ 0.163129] CPU features: detected: RAS Extension Support [ 0.163142] CPU features: detected: CRC32 instructions [ 0.163155] CPU features: detected: 32-bit EL1 Support [ 0.235944] CPU: All CPU(s) started at EL2 [ 0.241903] devtmpfs: initialized [ 0.291015] Registered cp15_barrier emulation handler [ 0.291161] Registered setend emulation handler [ 0.291183] KASLR enabled [ 0.291478] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291505] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293045] pinctrl core: initialized pinctrl subsystem [ 0.294142] SMBIOS 3.0.0 present. [ 0.294171] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294771] NET: Registered protocol family 16 [ 0.297242] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.297768] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.298717] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.298774] audit: initializing netlink subsys (disabled) [ 0.299071] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.299521] thermal_sys: Registered thermal governor 'step_wise' [ 0.299529] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299544] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.301938] cpuidle: using governor menu [ 0.302691] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.303236] ASID allocator initialised with 32768 entries [ 0.303476] Serial: AMBA PL011 UART driver [ 0.306522] Tegra reboot handler registered. [ 0.381778] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.381896] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.382078] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.382119] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.382291] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.382332] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.382449] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.382487] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.382612] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.382671] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.385039] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.385094] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.385126] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.385175] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.385211] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.385238] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.385275] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.385308] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.385334] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.385359] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.385383] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.385406] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.385431] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.385454] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.385494] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.385519] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.385565] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.385666] mc-err: mcerr ops are set to t19x [ 0.399006] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.399030] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.399044] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.399057] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.406656] ACPI: Interpreter disabled. [ 0.407930] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.409299] iommu: Default domain type: Translated [ 0.409359] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.409736] SCSI subsystem initialized [ 0.409905] usbcore: registered new interface driver usbfs [ 0.409950] usbcore: registered new interface driver hub [ 0.409985] usbcore: registered new device driver usb [ 0.410351] mc: Linux media interface: v0.10 [ 0.410384] videodev: Linux video capture interface: v2.00 [ 0.410681] pps_core: LinuxPPS API ver. 1 registered [ 0.410695] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.410716] PTP clock support registered [ 0.410907] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.411221] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.411279] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.412036] Registered efivars operations [ 0.417676] FPGA manager framework [ 0.417787] Advanced Linux Sound Architecture Driver Initialized. [ 0.418323] Bluetooth: Core ver 2.22 [ 0.418360] NET: Registered protocol family 31 [ 0.418372] Bluetooth: HCI device and connection manager initialized [ 0.418386] Bluetooth: HCI socket layer initialized [ 0.418404] Bluetooth: L2CAP socket layer initialized [ 0.418425] Bluetooth: SCO socket layer initialized [ 0.420135] camchar: rtcpu character device driver loaded [ 0.421021] clocksource: Switched to clocksource arch_sys_counter [ 0.746642] VFS: Disk quotas dquot_6.6.0 [ 0.746750] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.747167] pnp: PnP ACPI: disabled [ 0.759713] la/ptsa driver initialized. [ 0.759856] NET: Registered protocol family 2 [ 0.760055] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.764647] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.764718] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.765048] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.765488] TCP: Hash tables configured (established 65536 bind 65536) [ 0.765619] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.765712] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.765986] NET: Registered protocol family 1 [ 0.766666] RPC: Registered named UNIX socket transport module. [ 0.766682] RPC: Registered udp transport module. [ 0.766692] RPC: Registered tcp transport module. [ 0.766701] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.766729] PCI: CLS 0 bytes, default 64 [ 0.766970] Trying to unpack rootfs image as initramfs... [ 0.951576] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.953951] Freeing initrd memory: 8196K [ 0.957527] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.957555] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.957584] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.957901] kvm [1]: IPA Size Limit: 40 bits [ 0.958377] kvm [1]: vgic interrupt IRQ9 [ 0.958838] kvm [1]: VHE mode initialized successfully [ 0.960227] Initialise system trusted keyrings [ 0.960460] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.965864] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.966626] NFS: Registering the id_resolver key type [ 0.966655] Key type id_resolver registered [ 0.966665] Key type id_legacy registered [ 0.966737] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.966755] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.966781] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.978033] NET: Registered protocol family 38 [ 0.978054] Key type asymmetric registered [ 0.978065] Asymmetric key parser 'x509' registered [ 0.978140] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.978371] io scheduler mq-deadline registered [ 0.978385] io scheduler kyber registered [ 0.982488] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.984525] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.984586] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.984639] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.984691] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.984742] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.988444] scrncapt: init (heads:4 wins:6 planes:4) [ 0.988740] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.989298] EINJ: ACPI disabled. [ 0.991525] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.991548] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.991559] tegra-pmc: ### PMC reset level: L1 [ 0.991569] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.991605] tegra-pmc: PMC Prod config success [ 0.996631] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.480339] random: fast init done [ 2.547603] printk: console [ttyTCU0] enabled [ 2.553181] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.558230] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.562511] arm-smmu 10000000.iommu: stage 1 translation [ 2.568279] arm-smmu 10000000.iommu: stage 2 translation [ 2.573534] arm-smmu 10000000.iommu: nested translation [ 2.579144] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.586310] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.596359] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.599456] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.605992] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.613159] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.619033] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.623757] arm-smmu 12000000.iommu: stage 1 translation [ 2.629019] arm-smmu 12000000.iommu: stage 2 translation [ 2.634692] arm-smmu 12000000.iommu: nested translation [ 2.640145] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.647056] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.657102] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.660410] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.667008] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.674008] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.683619] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.687130] tegra_profiler: auth: init [ 2.691249] THERMAL EST: found 3 subdevs [ 2.695080] THERMAL EST num_resources: 0 [ 2.698926] [THERMAL EST subdev 0] [ 2.702245] [THERMAL EST subdev 1] [ 2.705654] [THERMAL EST subdev 2] [ 2.708629] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.715334] THERMAL EST: thz register success. [ 2.719337] THERMAL EST: end of probe, return err: 0 [ 2.724787] nvsciipc: loaded module [ 2.731171] tun: Universal TUN/TAP device driver, 1.6 [ 2.734192] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.740670] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.746221] e1000e: Intel(R) PRO/1000 Network Driver [ 2.751152] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.756968] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.762537] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.768544] PPP generic driver version 2.4.2 [ 2.772943] PPP BSD Compression module registered [ 2.777521] PPP Deflate Compression module registered [ 2.782491] PPP MPPE Compression module registered [ 2.787784] usbcore: registered new interface driver r8152 [ 2.793293] usbcore: registered new interface driver asix [ 2.798619] usbcore: registered new interface driver ax88179_178a [ 2.804751] usbcore: registered new interface driver cdc_ether [ 2.810675] usbcore: registered new interface driver net1080 [ 2.816276] usbcore: registered new interface driver cdc_subset [ 2.822328] usbcore: registered new interface driver zaurus [ 2.828007] usbcore: registered new interface driver cdc_ncm [ 2.833683] usbcore: registered new interface driver aqc111 [ 2.839304] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.845425] ohci-pci: OHCI PCI platform driver [ 2.849772] ohci-platform: OHCI generic platform driver [ 2.855306] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.861367] usbcore: registered new interface driver uas [ 2.865998] usbcore: registered new interface driver usb-storage [ 2.872063] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.877664] mousedev: PS/2 mouse device common for all mice [ 2.883178] usbcore: registered new interface driver xpad [ 2.890568] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.893901] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.901693] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.908132] i2c /dev entries driver [ 2.911535] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.916997] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.922332] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.927796] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.933159] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.938668] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.944095] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.955701] device-mapper: uevent: version 1.0.3 [ 2.956063] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.964282] cpuidle: Initializing cpuidle driver [ 2.968482] sdhci: Secure Digital Host Controller Interface driver [ 2.973254] sdhci: Copyright(c) Pierre Ossman [ 2.977625] Synopsys Designware Multimedia Card Interface Driver [ 2.983504] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.989784] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.990319] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.002601] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.021140] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.029943] vdd-1v0: supplied by regulator-dummy [ 3.035254] vdd-1v8-hs: supplied by regulator-dummy [ 3.039930] vdd-1v8-ls: supplied by regulator-dummy [ 3.044575] vdd-1v8-ao: supplied by regulator-dummy [ 3.048315] vddio-ddr-1v1: supplied by regulator-dummy [ 3.052610] vdd-rtc: supplied by regulator-dummy [ 3.054150] spmic-ldo1: supplied by regulator-dummy [ 3.055340] vdd-ao-3v3: supplied by regulator-dummy [ 3.061390] vddio-emmc-3v3: supplied by regulator-dummy [ 3.067497] spmic-ldo4: supplied by regulator-dummy [ 3.068583] vdd-usb-3v3: supplied by regulator-dummy [ 3.074597] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.080581] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.085970] spmic-ldo8: supplied by vdd-1v8-ls [ 3.087259] gpio-510 (gpio_default): hogged as output/high [ 3.089770] gpio-511 (gpio_default): hogged as output/high [ 3.096581] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.234976] max77686-rtc max77620-rtc: registered as rtc0 [ 3.235917] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.236182] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.937541] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.938358] hid: raw HID events driver (C) Jiri Kosina [ 3.938951] usbcore: registered new interface driver usbhid [ 3.939087] usbhid: USB HID core driver [ 3.940684] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.941805] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.941381] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.017369] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.798 ms) ÿá[ 4.027470] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.028022] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.029093] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.029742] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.031316] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.031883] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.032366] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.033519] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.033826] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.035571] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.043990] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.050515] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.055149] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.061818] denver_knobs_init:MTS_VERSION:55637613 [ 4.073408] t19x_cache tegra-cache: probed [ 4.075606] optee: probing for conduit method. [ 4.076386] optee: revision 3.16 (65cc2218) [ 4.077274] optee: dynamic shared memory is enabled [ 4.082226] optee: initialized driver [ 4.088698] nvpmodel: initialized successfully [ 4.090600] tegra_hv: get_hvd: not initialized yet [ 4.094874] user_ivc_mempool: hypervisor not present [ 4.100881] usbcore: registered new interface driver snd-usb-audio [ 4.107075] u32 classifier [ 4.108367] input device check on [ 4.112455] Actions configured [ 4.115991] Initializing XFRM netlink socket [ 4.120484] NET: Registered protocol family 10 [ 4.126959] Segment Routing with IPv6 [ 4.128200] NET: Registered protocol family 17 [ 4.132320] NET: Registered protocol family 15 [ 4.136883] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.150538] Bluetooth: RFCOMM socket layer initialized [ 4.155236] Bluetooth: RFCOMM ver 1.11 [ 4.158890] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.164644] Bluetooth: HIDP socket layer initialized [ 4.170727] 9pnet: Installing 9P2000 support [ 4.174374] Key type dns_resolver registered [ 4.179603] registered taskstats version 1 [ 4.182799] Loading compiled-in X.509 certificates [ 4.194873] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.198555] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.208137] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.210540] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.219034] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.227758] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.345115] tegra194-pcie 14160000.pcie: Link up [ 4.347784] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.348022] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.348166] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.348398] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.348592] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.348960] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.349410] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.358117] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.358555] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.359009] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.360423] pci 0004:01:00.0: supports D1 D2 [ 4.360643] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.368995] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.369457] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.369764] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.370126] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.370472] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.373635] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.379659] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.387036] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.395745] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.405822] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.410760] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.415993] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.422864] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.431258] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.433668] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.442291] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.450592] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.557168] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.557769] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.557966] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.558162] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.558420] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.558648] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.558999] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.559417] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.574625] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.574909] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.576700] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.578090] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.579346] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.580902] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.581865] pci 0005:00:00.0: Removing from iommu group 7 [ 5.582125] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.612087] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.633215] host1x 13e10000.host1x: initialized [ 5.634763] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.635539] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.636592] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.637394] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.638405] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.639073] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.639943] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.640477] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.650090] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.657258] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.667099] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.674124] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.684201] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.691309] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.701161] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.708351] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.717893] falcon 15340000.vic: Adding to iommu group 17 [ 5.732233] falcon 15340000.vic: initialized [ 5.733277] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.738657] falcon 15380000.nvjpg: initialized [ 5.739404] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.751352] falcon 154c0000.nvenc: initialized [ 5.751978] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.761848] falcon 15a80000.nvenc1: initialized [ 5.762472] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.773380] nvdec 15480000.nvdec: initialized [ 5.773938] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.782893] nvdec 15140000.nvdec1: initialized [ 5.783428] tsec 15500000.tsec: Adding to iommu group 18 [ 5.789379] tsec 15500000.tsec: initialized [ 5.789849] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.797995] tsec 15100000.tsecb: initialized [ 5.801712] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.826286] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.836947] gpio-374 (wifi-enable): hogged as output/high [ 5.837353] gpio-431 (camera-control-output-low): hogged as output/low [ 5.837687] gpio-432 (camera-control-output-low): hogged as output/low [ 5.839250] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.840695] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.842838] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.849231] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.854725] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.860386] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.866119] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.874079] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.881539] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.892694] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.898454] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.904409] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.913090] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.922422] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.929495] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.937062] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.943574] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.953344] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.959169] pva 16000000.pva0: Adding to iommu group 22 [ 5.984892] pva 16000000.pva0: initialized [ 5.990045] pva 16800000.pva1: Adding to iommu group 23 [ 5.999964] pva 16800000.pva1: initialized [ 6.003929] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.024141] nvdla 15880000.nvdla0: initialized [ 6.025574] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.033947] nvdla 158c0000.nvdla1: initialized [ 6.036171] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.036484] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.037169] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.037213] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.037526] tegradc 15200000.display: Adding to iommu group 26 [ 6.037532] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.037635] tegradccommon 15200000.display-hub: dma mapping done [ 6.039024] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.049092] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.051216] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.054712] tegra_cec 3960000.tegra_cec: probed [ 6.061168] generic_infoframe_type: 0x87 [ 6.067505] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.069262] tegradc 15210000.display: Adding to iommu group 26 [ 6.069476] tegradc 15200000.display: DT parsed successfully [ 6.069566] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.077624] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.102341] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.110250] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.118586] kfuse 3830000.kfuse: initialized [ 6.122653] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.123441] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.137227] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.144031] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.144369] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.149608] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.162276] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.162780] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.183702] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.183990] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.188051] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.204048] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.204996] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.212542] tegradc 15210000.display: disp0 connected to head1->sor [ 6.216873] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.222698] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.238683] tegradc 15210000.display: DT parsed successfully [ 6.242833] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.244321] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.261407] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.267243] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.275238] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.283710] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.290642] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.298172] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.305525] usb usb1: Product: xHCI Host Controller [ 6.310173] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.316674] usb usb1: SerialNumber: 3610000.xhci [ 6.322329] hub 1-0:1.0: USB hub found [ 6.324966] hub 1-0:1.0: 4 ports detected [ 6.329655] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.334458] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.342297] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.349943] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.357648] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.364922] usb usb2: Product: xHCI Host Controller [ 6.370126] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.376354] usb usb2: SerialNumber: 3610000.xhci [ 6.381844] hub 2-0:1.0: USB hub found [ 6.384776] hub 2-0:1.0: 4 ports detected [ 6.423791] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.429528] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.430736] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.430909] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.443896] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.444896] tegra194-cpufreq ccplex: probed with BWMGR [ 6.446258] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.446857] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.447308] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.448648] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.460279] mmc0: CQHCI version 5.10 [ 6.461666] tegra194-vi5 15c10000.vi: initialized [ 6.463658] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.464887] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.468655] generic_infoframe_type: 0x87 [ 6.475055] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.478798] tegradc 15200000.display: DT parsed successfully [ 6.486924] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.487783] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.492467] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.498985] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.507387] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.514388] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.514398] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.521472] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.521480] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.537077] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.542915] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.550960] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.550968] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.558576] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.567227] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.571503] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.574763] mmc0: Command Queue Engine enabled [ 6.574778] mmc0: periodic cache flush enabled [ 6.574792] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.575329] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.575452] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.579240] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.586156] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.597041] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.598648] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.600870] tegradc 15200000.display: probed [ 6.609637] nvethernet 2490000.ethernet: Macsec not supported [ 6.677000] Console: switching to colour frame buffer device 240x67 [ 6.678093] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.683175] tegradc 15200000.display: fb registered [ 6.683259] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.701695] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.707425] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.715025] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.721552] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.722760] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.733915] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.735519] tegra-se-nvhost 15810000.se: initialized [ 6.749630] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.751283] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.758023] tegra-se-nvhost 15820000.se: initialized [ 6.764922] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.768630] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.775426] tegra-se-nvhost 15830000.se: initialized [ 6.781479] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.786132] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.792780] tegra-se-nvhost 15840000.se: initialized [ 6.798505] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.799443] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.805270] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.805281] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.809700] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.812098] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.812887] tegra_actmon d230000.actmon: in actmon_register()... [ 6.813109] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.813567] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.814272] hvc_sysfs: hypervisor is not present [ 6.818708] usb 1-2: Manufacturer: Generic [ 6.820759] hub 1-2:1.0: USB hub found [ 6.823260] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.841576] ALSA device list: [ 6.842525] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.842529] Extcon AUX1(HDMI) enable [ 6.842677] tegradc 15210000.display: disp1 connected to head1->sor [ 6.843017] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.843077] tegradc 15210000.display: DT parsed successfully [ 6.843114] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.843210] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.843216] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.846935] hub 1-2:1.0: 4 ports detected [ 6.850225] tegradc 15210000.display: probed [ 6.851282] No soundcards found. [ 6.901922] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.952134] tegradc 15210000.display: fb registered [ 6.955741] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.964487] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.964496] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.977674] tegradc 15210000.display: blank - powerdown [ 6.978650] Freeing unused kernel memory: 3968K [ 6.983049] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.983080] Extcon DP: HPD disabled [ 6.987511] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.987538] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.987542] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.987546] usb 2-3: Manufacturer: Generic [ 6.987820] Run /init as init process [ 6.995805] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.995817] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.995822] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.998291] hub 2-3:1.0: USB hub found [ 7.009537] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.055112] tegradc 15200000.display: blank - powerdown [ 7.073073] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.093452] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.093460] Extcon AUX1(HDMI) disable [ 7.109061] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.116919] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.117805] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.128985] tegradc 15200000.display: unblank [ 7.130059] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.130253] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.136107] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.137614] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.137620] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.137988] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.142001] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.142005] Extcon AUX1(HDMI) enable [ 7.154736] tegradc 15200000.display: sync windows ret = 247 [ 7.183086] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.184480] Extcon HDMI: HPD enabled [ 7.185802] tegradc 15200000.display: hdmi: plugged [ 7.234005] Root device found: mmcblk0p1 [ 7.237418] Found dev node: /dev/mmcblk0p1 [ 7.266313] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.267695] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.269001] usb 1-3: Product: Bluetooth Radio [ 7.270332] usb 1-3: Manufacturer: Realtek [ 7.271588] usb 1-3: SerialNumber: 00e04c000001 [ 7.273455] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.278991] Rootfs mounted over mmcblk0p1 [ 7.315516] Switching from initrd to actual rootfs [ 7.464250] systemd[1]: System time before build time, advancing clock. [ 7.531203] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.536211] systemd[1]: Detected architecture arm64. [ 7.588873] systemd[1]: Set hostname to . [ 7.751939] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.092136] random: systemd: uninitialized urandom read (16 bytes read) [ 8.093865] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.095477] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.101152] systemd[1]: Created slice system-modprobe.slice. [ 8.104601] random: systemd: uninitialized urandom read (16 bytes read) [ 8.107257] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.110381] random: systemd: uninitialized urandom read (16 bytes read) [ 8.112923] systemd[1]: Created slice User and Session Slice. [ 8.116582] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.120702] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.124026] systemd[1]: Reached target User and Group Name Lookups. [ 8.127183] systemd[1]: Reached target Slices. [ 8.130195] systemd[1]: Reached target Swap. [ 8.134134] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.137713] systemd[1]: Listening on Syslog Socket. [ 8.141205] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.144512] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.148750] systemd[1]: Listening on Journal Audit Socket. [ 8.153521] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.158728] systemd[1]: Listening on Journal Socket. [ 8.162435] systemd[1]: Listening on udev Control Socket. [ 8.165940] systemd[1]: Listening on udev Kernel Socket. [ 8.174093] systemd[1]: Mounting Huge Pages File System... [ 8.182267] systemd[1]: Mounting POSIX Message Queue File System... [ 8.190075] systemd[1]: Mounting RPC Pipe File System... [ 8.198667] systemd[1]: Mounting Kernel Debug File System... [ 8.206969] systemd[1]: Mounting Kernel Trace File System... [ 8.216658] systemd[1]: Starting Journal Service... [ 8.225493] systemd[1]: Starting Set the console keyboard layout... [ 8.233645] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.237095] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.243336] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.251594] systemd[1]: Started Nameserver information manager. [ 8.256546] systemd[1]: Reached target Network (Pre). [ 8.262946] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.264777] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.273115] systemd[1]: Starting Load Kernel Modules... [ 8.280839] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.289692] systemd[1]: Starting udev Coldplug all Devices... [ 8.299666] systemd[1]: Mounted Huge Pages File System. [ 8.303369] systemd[1]: Mounted POSIX Message Queue File System. [ 8.306884] systemd[1]: Mounted RPC Pipe File System. [ 8.310373] systemd[1]: Mounted Kernel Debug File System. [ 8.313084] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.315614] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.316100] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.322318] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.322332] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.322336] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.322591] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.324739] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.336938] systemd[1]: Mounted Kernel Trace File System. [ 8.339372] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.339392] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.357513] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.365778] systemd[1]: nvfb-udev.service: Succeeded. [ 8.370703] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.383388] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.395753] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.398097] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.404191] systemd[1]: Starting Load/Save Random Seed... [ 8.412691] systemd[1]: Starting Create System Users... [ 8.432281] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.432281] [ 8.466618] systemd[1]: Finished Load Kernel Modules. [ 8.470794] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.476915] systemd[1]: Mounting Kernel Configuration File System... [ 8.485101] systemd[1]: Started OP-TEE Client Supplicant. [ 8.492816] systemd[1]: Starting Apply Kernel Variables... [ 8.502419] systemd[1]: Finished Set the console keyboard layout. [ 8.507328] systemd[1]: Mounted Kernel Configuration File System. [ 8.519522] systemd[1]: Finished Create System Users. [ 9.826261] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.832781] imx219 9-0010: board setup failed [ 9.834362] imx219: probe of 9-0010 failed with error -121 [ 9.846385] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.851583] imx219 10-0010: board setup failed [ 9.851699] imx219: probe of 10-0010 failed with error -121 [ 9.854648] random: crng init done [ 9.859147] random: 7 urandom warning(s) missed due to ratelimiting [ 9.969122] hot-surface-alert cooling state: 0 -> 1 [ 11.131358] using random self ethernet address [ 11.153370] using random host ethernet address [ 11.488622] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.490323] Creating 1 MTD partitions on "spi6.0": [ 11.491933] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.466031] using random self ethernet address [ 12.467531] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.794055] nvidia: loading out-of-tree module taints kernel. [ 58.674441] watchdog: watchdog0: watchdog did not stop! [ 59.154366] Trying to unregister non-registered hwtime source [ 62.220402] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.222410] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0ìÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 69000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aÿâclk_dt_late initialized noc_late initialized ÿäuÿâpm_post initialized dbells initialized ÿäg 1ÿâdmce initialized ÿä1ÿâcvc initialized ÿä 03:23:20 UTÿâavfs_clk_mach_post initialized ÿäC 20ÿâavfs_clk_platform_post initialized ÿä22 ÿâcvc_late initialized regulator_post initialized ÿäaarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.643] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.644] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.645] I> width = 720, height = 480, frequency = 26973026 [0003.649] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.688] I> width = 3840, height = 2160, frequency = 296703296 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.717] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.733] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.743] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000826] Console: colour dummy device 80x25 [ 0.002161] printk: console [tty0] enabled [ 0.002223] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002258] pid_max: default: 32768 minimum: 301 [ 0.002434] LSM: Security Framework initializing [ 0.002492] Yama: becoming mindful. [ 0.002534] SELinux: Initializing. [ 0.002684] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002722] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005937] rcu: Hierarchical SRCU implementation. [ 0.006216] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007077] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007129] DTB Build time: Aug 10 2022 20:31:49 [ 0.010376] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010633] Remapping and enabling EFI services. [ 0.012607] smp: Bringing up secondary CPUs ... [ 0.042280] Detected PIPT I-cache on CPU1 [ 0.042386] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072715] Detected PIPT I-cache on CPU2 [ 0.072866] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102435] Detected PIPT I-cache on CPU3 [ 0.102530] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132201] Detected PIPT I-cache on CPU4 [ 0.132351] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162046] Detected PIPT I-cache on CPU5 [ 0.162201] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162604] smp: Brought up 1 node, 6 CPUs [ 0.162783] SMP: Total of 6 processors activated. [ 0.162848] CPU features: detected: Privileged Access Never [ 0.162872] CPU features: detected: LSE atomic instructions [ 0.162885] CPU features: detected: User Access Override [ 0.162898] CPU features: detected: 32-bit EL0 Support [ 0.162910] CPU features: detected: RAS Extension Support [ 0.162923] CPU features: detected: CRC32 instructions [ 0.162936] CPU features: detected: 32-bit EL1 Support [ 0.232028] CPU: All CPU(s) started at EL2 [ 0.238442] devtmpfs: initialized [ 0.287142] Registered cp15_barrier emulation handler [ 0.287267] Registered setend emulation handler [ 0.287307] KASLR enabled [ 0.287581] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287605] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289030] pinctrl core: initialized pinctrl subsystem [ 0.290136] SMBIOS 3.0.0 present. [ 0.290171] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.290818] NET: Registered protocol family 16 [ 0.292895] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293406] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294097] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294153] audit: initializing netlink subsys (disabled) [ 0.294376] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.294833] thermal_sys: Registered thermal governor 'step_wise' [ 0.294839] thermal_sys: Registered thermal governor 'power_allocator' [ 0.294854] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.297027] cpuidle: using governor menu [ 0.297433] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297860] ASID allocator initialised with 32768 entries [ 0.298107] Serial: AMBA PL011 UART driver [ 0.301387] Tegra reboot handler registered. [ 0.373289] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.373398] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.373587] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.373630] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.373794] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.373839] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.373964] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.374011] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.374137] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.374195] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.376348] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.376400] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.376427] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.376453] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.376480] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.376506] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.376531] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.376557] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.376582] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.376607] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.376632] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.376658] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.376684] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.376708] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.376733] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.376758] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.376784] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.376877] mc-err: mcerr ops are set to t19x [ 0.390265] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390291] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390305] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390319] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397344] ACPI: Interpreter disabled. [ 0.398526] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.399765] iommu: Default domain type: Translated [ 0.399843] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400268] SCSI subsystem initialized [ 0.400423] usbcore: registered new interface driver usbfs [ 0.400480] usbcore: registered new interface driver hub [ 0.400515] usbcore: registered new device driver usb [ 0.400921] mc: Linux media interface: v0.10 [ 0.400949] videodev: Linux video capture interface: v2.00 [ 0.401243] pps_core: LinuxPPS API ver. 1 registered [ 0.401255] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401276] PTP clock support registered [ 0.401474] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.401801] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401885] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.402507] Registered efivars operations [ 0.408228] FPGA manager framework [ 0.408337] Advanced Linux Sound Architecture Driver Initialized. [ 0.408980] Bluetooth: Core ver 2.22 [ 0.409046] NET: Registered protocol family 31 [ 0.409057] Bluetooth: HCI device and connection manager initialized [ 0.409073] Bluetooth: HCI socket layer initialized [ 0.409092] Bluetooth: L2CAP socket layer initialized [ 0.409116] Bluetooth: SCO socket layer initialized [ 0.410510] camchar: rtcpu character device driver loaded [ 0.411323] clocksource: Switched to clocksource arch_sys_counter [ 0.705859] VFS: Disk quotas dquot_6.6.0 [ 0.705948] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.706293] pnp: PnP ACPI: disabled [ 0.716826] la/ptsa driver initialized. [ 0.716969] NET: Registered protocol family 2 [ 0.717149] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.722042] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.722108] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.722429] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.722864] TCP: Hash tables configured (established 65536 bind 65536) [ 0.722994] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.723106] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.723305] NET: Registered protocol family 1 [ 0.724214] RPC: Registered named UNIX socket transport module. [ 0.724253] RPC: Registered udp transport module. [ 0.724269] RPC: Registered tcp transport module. [ 0.724285] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.724310] PCI: CLS 0 bytes, default 64 [ 0.724654] Trying to unpack rootfs image as initramfs... [ 0.989930] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.993342] Freeing initrd memory: 8196K [ 0.997975] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.998012] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.998052] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.998414] kvm [1]: IPA Size Limit: 40 bits [ 0.998886] kvm [1]: vgic interrupt IRQ9 [ 0.999413] kvm [1]: VHE mode initialized successfully [ 1.000933] Initialise system trusted keyrings [ 1.001257] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.007992] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.008959] NFS: Registering the id_resolver key type [ 1.008996] Key type id_resolver registered [ 1.009011] Key type id_legacy registered [ 1.009115] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.009140] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.009181] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.018815] NET: Registered protocol family 38 [ 1.018838] Key type asymmetric registered [ 1.018855] Asymmetric key parser 'x509' registered [ 1.018939] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.019278] io scheduler mq-deadline registered [ 1.019299] io scheduler kyber registered [ 1.025633] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.029095] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.029188] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.029264] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.029365] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.029442] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.036378] scrncapt: init (heads:4 wins:6 planes:4) [ 1.036400] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.037692] EINJ: ACPI disabled. [ 1.041740] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.041765] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.041781] tegra-pmc: ### PMC reset level: L1 [ 1.041795] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.041842] tegra-pmc: PMC Prod config success [ 1.047426] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.053275] random: fast init done [ 1.053608] printk: console [ttyTCU0] enabled [ 2.605202] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.609545] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.614151] arm-smmu 10000000.iommu: stage 1 translation [ 2.619933] arm-smmu 10000000.iommu: stage 2 translation [ 2.625103] arm-smmu 10000000.iommu: nested translation [ 2.630447] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.637888] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.647466] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.650986] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.657328] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.664793] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.670616] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.675327] arm-smmu 12000000.iommu: stage 1 translation [ 2.680827] arm-smmu 12000000.iommu: stage 2 translation [ 2.686257] arm-smmu 12000000.iommu: nested translation [ 2.691684] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.698857] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.708438] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.711739] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.718545] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.725651] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.735712] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.738913] tegra_profiler: auth: init [ 2.742898] THERMAL EST: found 3 subdevs [ 2.746421] THERMAL EST num_resources: 0 [ 2.750482] [THERMAL EST subdev 0] [ 2.753546] [THERMAL EST subdev 1] [ 2.757230] [THERMAL EST subdev 2] [ 2.760203] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.766585] THERMAL EST: thz register success. [ 2.771154] THERMAL EST: end of probe, return err: 0 [ 2.776192] nvsciipc: loaded module [ 2.782714] tun: Universal TUN/TAP device driver, 1.6 [ 2.785759] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.792233] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.797814] e1000e: Intel(R) PRO/1000 Network Driver [ 2.802456] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.808782] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.814087] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.820182] PPP generic driver version 2.4.2 [ 2.824472] PPP BSD Compression module registered [ 2.828817] PPP Deflate Compression module registered [ 2.834313] PPP MPPE Compression module registered [ 2.839067] usbcore: registered new interface driver r8152 [ 2.844570] usbcore: registered new interface driver asix [ 2.850165] usbcore: registered new interface driver ax88179_178a [ 2.856039] usbcore: registered new interface driver cdc_ether [ 2.861977] usbcore: registered new interface driver net1080 [ 2.867840] usbcore: registered new interface driver cdc_subset [ 2.873624] usbcore: registered new interface driver zaurus [ 2.879372] usbcore: registered new interface driver cdc_ncm [ 2.885246] usbcore: registered new interface driver aqc111 [ 2.890884] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.896965] ohci-pci: OHCI PCI platform driver [ 2.901261] ohci-platform: OHCI generic platform driver [ 2.907016] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.913173] usbcore: registered new interface driver uas [ 2.917338] usbcore: registered new interface driver usb-storage [ 2.923416] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.929343] mousedev: PS/2 mouse device common for all mice [ 2.934726] usbcore: registered new interface driver xpad [ 2.942337] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.945498] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.953009] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.959710] i2c /dev entries driver [ 2.963066] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.968548] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.974245] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.979584] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.984702] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.990406] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.995823] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.007680] device-mapper: uevent: version 1.0.3 [ 3.008063] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.015963] cpuidle: Initializing cpuidle driver [ 3.019990] sdhci: Secure Digital Host Controller Interface driver [ 3.024809] sdhci: Copyright(c) Pierre Ossman [ 3.029167] Synopsys Designware Multimedia Card Interface Driver [ 3.035097] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.041084] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.041680] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.054348] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.073092] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.082034] vdd-1v0: supplied by regulator-dummy [ 3.087400] vdd-1v8-hs: supplied by regulator-dummy [ 3.092189] vdd-1v8-ls: supplied by regulator-dummy [ 3.096801] vdd-1v8-ao: supplied by regulator-dummy [ 3.100595] vddio-ddr-1v1: supplied by regulator-dummy [ 3.104875] vdd-rtc: supplied by regulator-dummy [ 3.106503] spmic-ldo1: supplied by regulator-dummy [ 3.107638] vdd-ao-3v3: supplied by regulator-dummy [ 3.113776] vddio-emmc-3v3: supplied by regulator-dummy [ 3.119946] spmic-ldo4: supplied by regulator-dummy [ 3.121047] vdd-usb-3v3: supplied by regulator-dummy [ 3.127089] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.133218] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.138642] spmic-ldo8: supplied by vdd-1v8-ls [ 3.140003] gpio-510 (gpio_default): hogged as output/high [ 3.141310] gpio-511 (gpio_default): hogged as output/high [ 3.147942] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.286627] max77686-rtc max77620-rtc: registered as rtc0 [ 3.287854] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.288166] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.996968] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.998007] hid: raw HID events driver (C) Jiri Kosina [ 3.998671] usbcore: registered new interface driver usbhid [ 3.998822] usbhid: USB HID core driver [ 4.000553] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.001726] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.034751] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.110328] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.388 ms) ÿá[ 4.086887] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.087435] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.088428] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.089076] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.090700] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.091255] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.091793] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.092826] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.093121] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.094983] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.102867] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.109776] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.114361] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.121325] denver_knobs_init:MTS_VERSION:55637613 [ 4.134049] t19x_cache tegra-cache: probed [ 4.137014] optee: probing for conduit method. [ 4.138004] optee: revision 3.16 (65cc2218) [ 4.139305] optee: dynamic shared memory is enabled [ 4.141945] optee: initialized driver [ 4.148338] nvpmodel: initialized successfully [ 4.149617] tegra_hv: get_hvd: not initialized yet [ 4.154503] user_ivc_mempool: hypervisor not present [ 4.160483] usbcore: registered new interface driver snd-usb-audio [ 4.166900] u32 classifier [ 4.168066] input device check on [ 4.171648] Actions configured [ 4.175546] Initializing XFRM netlink socket [ 4.180593] NET: Registered protocol family 10 [ 4.186634] Segment Routing with IPv6 [ 4.187798] NET: Registered protocol family 17 [ 4.191743] NET: Registered protocol family 15 [ 4.196496] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.210183] Bluetooth: RFCOMM socket layer initialized [ 4.214479] Bluetooth: RFCOMM ver 1.11 [ 4.218623] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.224277] Bluetooth: HIDP socket layer initialized [ 4.230127] 9pnet: Installing 9P2000 support [ 4.233661] Key type dns_resolver registered [ 4.239130] registered taskstats version 1 [ 4.242320] Loading compiled-in X.509 certificates [ 4.254336] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.258224] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.267940] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.270273] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.278615] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.287291] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.403416] tegra194-pcie 14160000.pcie: Link up [ 4.406096] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.406288] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.406414] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.406613] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.406838] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.407238] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.407683] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.420324] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.420836] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.421377] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.422862] pci 0004:01:00.0: supports D1 D2 [ 4.423028] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.432429] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.432827] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.433050] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.433516] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.433810] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.434034] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.438305] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.445367] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.454245] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.464234] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.469047] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.474081] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.481359] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.489803] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.492096] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.500376] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.509306] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.615435] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.616067] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.616260] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.616462] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.616734] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.616938] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.617294] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.617713] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.635602] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.635940] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.637567] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.638647] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.640256] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.641702] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.642632] pci 0005:00:00.0: Removing from iommu group 7 [ 5.642951] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.671096] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.692204] host1x 13e10000.host1x: initialized [ 5.693773] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.694666] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.695985] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.696672] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.697641] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.698218] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.699214] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.700016] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.708659] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.715623] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.725475] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.732626] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.742629] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.749706] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.759225] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.766367] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.776407] falcon 15340000.vic: Adding to iommu group 17 [ 5.790458] falcon 15340000.vic: initialized [ 5.791474] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.796370] falcon 15380000.nvjpg: initialized [ 5.797025] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.808589] falcon 154c0000.nvenc: initialized [ 5.809198] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.818705] falcon 15a80000.nvenc1: initialized [ 5.819261] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.831250] nvdec 15480000.nvdec: initialized [ 5.831795] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.842615] nvdec 15140000.nvdec1: initialized [ 5.843123] tsec 15500000.tsec: Adding to iommu group 18 [ 5.848994] tsec 15500000.tsec: initialized [ 5.849483] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.856274] tsec 15100000.tsecb: initialized [ 5.859913] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.884758] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.898190] gpio-374 (wifi-enable): hogged as output/high [ 5.898499] gpio-431 (camera-control-output-low): hogged as output/low [ 5.898743] gpio-432 (camera-control-output-low): hogged as output/low [ 5.900638] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.902595] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.903202] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.907778] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.913310] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.919513] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.924601] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.933200] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.940240] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.952092] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.956683] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.962504] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.971628] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.980640] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.988600] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.995757] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.001656] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.011526] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.017826] pva 16000000.pva0: Adding to iommu group 22 [ 6.044471] pva 16000000.pva0: initialized [ 6.050198] pva 16800000.pva1: Adding to iommu group 23 [ 6.061599] pva 16800000.pva1: initialized [ 6.066688] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.079686] nvdla 15880000.nvdla0: initialized [ 6.081204] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.090779] nvdla 158c0000.nvdla1: initialized [ 6.093129] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.093355] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.093648] tegradccommon 15200000.display-hub: dma mapping done [ 6.095281] tegradc 15200000.display: Adding to iommu group 26 [ 6.102920] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.103283] generic_infoframe_type: 0x87 [ 6.103557] tegradc 15200000.display: DT parsed successfully [ 6.103778] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.108015] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.109795] tegradc 15210000.display: Adding to iommu group 26 [ 6.114046] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.126046] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.126429] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.133739] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.140524] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.148037] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.161477] tegra_cec 3960000.tegra_cec: probed [ 6.161770] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.166967] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.171974] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.184550] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.214515] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.214716] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.215246] ************************************** [ 6.215429] CPU:0, Error:cbb-noc [ 6.215604] Error Logger : 0 [ 6.216216] ErrLog0 : 0x80030000 [ 6.220061] Transaction Type : RD - Read, Incrementing [ 6.225302] Error Code : SLV [ 6.228976] Error Source : Target [ 6.232479] Error Description : Target error detected by CBB slave [ 6.238806] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.246685] Packet header Lock : 0 [ 6.250145] Packet header Len1 : 3 [ 6.253823] NOC protocol version : version >= 2.7 [ 6.258464] ErrLog1 : 0x350e28 [ 6.261874] ErrLog2 : 0x0 [ 6.265035] RouteId : 0x350e28 [ 6.268348] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.273076] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.278145] TargSubRange : 7 [ 6.281126] SeqId : 0 [ 6.283926] ErrLog3 : 0x101c [ 6.286900] ErrLog4 : 0x0 [ 6.290077] Address accessed : 0x1520101c [ 6.294507] ErrLog5 : 0xa09f851 [ 6.297512] Non-Modify : 0x1 [ 6.301157] AXI ID : 0x14 [ 6.304308] Master ID : CCPLEX [ 6.307636] Security Group(GRPSEC): 0x7e [ 6.311578] Cache : 0x1 -- Bufferable [ 6.315776] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.322600] FALCONSEC : 0x0 [ 6.325752] Virtual Queuing Channel(VQC): 0x0 [ 6.330392] ************************************** [ 6.335736] ------------[ cut here ]------------ [ 6.340190] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.346501] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.351920] Modules linked in: [ 6.355102] CPU: 0 PID: 121 Comm: kworker/0:3 Not tainted 5.10.104-tegra #1 [ 6.361972] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.374277] Workqueue: events tegra_cec_init_worker [ 6.379002] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.385288] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 6.389975] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 6.394444] sp : ffff800010003b30 [ 6.398040] x29: ffff800010003b30 x28: 0000000000000001 [ 6.403198] x27: 0000000000000005 x26: ffffd01448c73f58 [ 6.408882] x25: ffffd014495cce10 x24: 0000000000000001 [ 6.413974] x23: ffffd01448f67000 x22: ffffd014493eea00 [ 6.419795] x21: 000000000000000f x20: ffff4fe4c0e66180 [ 6.424943] x19: ffffd014493eea00 x18: 0000000000000010 [ 6.430317] x17: ffff80001057e000 x16: 0000000080815173 [ 6.435854] x15: ffff4fe615f593f0 x14: 0720072007200720 [ 6.441639] x13: 0720072007200720 x12: 0720072007200720 [ 6.446778] x11: 0720072007200720 x10: 0720072007200720 [ 6.452553] x9 : 0720072007200720 x8 : 07200720072a072a [ 6.457786] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 6.463577] x5 : 0000000000057fa8 x4 : ffffd01449277968 [ 6.468740] x3 : 00000000ffffffff x2 : ffffd0144770e090 [ 6.474067] x1 : ffff4fe615f58e80 x0 : 0000000000010101 [ 6.479677] Call trace: [ 6.482119] tegra194_cbb_err_isr+0x190/0x1b0 [ 6.486162] __handle_irq_event_percpu+0x68/0x2a0 [ 6.490882] handle_irq_event_percpu+0x40/0xa0 [ 6.495413] handle_irq_event+0x50/0xf0 [ 6.498920] handle_fasteoi_irq+0xc0/0x170 [ 6.502946] generic_handle_irq+0x40/0x60 [ 6.507224] __handle_domain_irq+0x70/0xd0 [ 6.511431] efi_header_end+0xb0/0xf0 [ 6.514924] el1_irq+0xd0/0x180 [ 6.517897] __do_softirq+0xb4/0x3e8 [ 6.521587] irq_exit+0xc0/0xe0 [ 6.524549] __handle_domain_irq+0x74/0xd0 [ 6.528573] efi_header_end+0xb0/0xf0 [ 6.532249] el1_irq+0xd0/0x180 [ 6.535225] console_unlock+0x28c/0x540 [ 6.538903] vprintk_emit+0x124/0x2a0 [ 6.542675] dev_vprintk_emit+0x154/0x184 [ 6.546686] dev_printk_emit+0x80/0xa8 [ 6.550190] __dev_printk+0x7c/0xa4 [ 6.554035] _dev_notice+0x74/0x9c [ 6.557451] tegra_cec_init_worker+0x7c/0x660 [ 6.561665] process_one_work+0x1c4/0x4a0 [ 6.565764] worker_thread+0x54/0x430 [ 6.569357] kthread+0x148/0x170 [ 6.572852] ret_from_fork+0x10/0x24 [ 6.576450] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 6.582766] ---[ end trace 1a75f6b2e14123ad ]--- [ 6.587382] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 6.594666] SMP: stopping secondary CPUs [ 6.598699] Kernel Offset: 0x501437550000 from 0xffff800010000000 [ 6.604787] PHYS_OFFSET: 0xffffb01c40000000 [ 6.609024] CPU features: 0x8240002,03802a30 [ 6.613275] Memory Limit: none [ 6.616257] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 65000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.030] > DEVICE_PROD: device prod is not initialized. [0002.335] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.336] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.337] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.337] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.338] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.338] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.352] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.355] I> found decompressor handler: lz4 [0002.583] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.585] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.204] I> Welcome to NVDisp-Init [0003.204] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.205] I> 0) Base:0x00000000 Size:0x00000000 [0003.205] I> 1) Base:0xc8300000 Size:0x00100000 [0003.205] I> 2) Base:0xc9800000 Size:0x00200000 [0003.206] I> 3) Base:0xc8600000 Size:0x00200000 [0003.208] I> 4) Base:0xc8200000 Size:0x00100000 [0003.213] I> 5) Base:0xc8100000 Size:0x00100000 [0003.217] I> 6) Base:0xc9400000 Size:0x00400000 [0003.222] I> 7) Base:0xc9000000 Size:0x00400000 [0003.226] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.235] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.244] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.248] I> 13) Base:0x40046000 Size:0x00002000 [0003.253] I> 14) Base:0x40048000 Size:0x00002000 [0003.257] I> 15) Base:0xaf000000 Size:0x00004000 [0003.262] I> 16) Base:0x4004a000 Size:0x00002000 [0003.266] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.271] I> 18) Base:0x4004c000 Size:0x00002000 [0003.275] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.280] I> 20) Base:0x4004e000 Size:0x00002000 [0003.284] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.293] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.302] I> 25) Base:0x40050000 Size:0x00002000 [0003.306] I> 26) Base:0x40040000 Size:0x00006000 [0003.311] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.315] I> 28) Base:0xc8400000 Size:0x00200000 [0003.320] I> 29) Base:0xc8800000 Size:0x00400000 [0003.324] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.329] I> 31) Base:0x00000000 Size:0x00000000 [0003.333] I> 32) Base:0xf8000000 Size:0x08000000 [0003.338] I> 33) Base:0xce000000 Size:0x2a000000 [0003.342] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.351] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.360] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.369] I> 40) Base:0x00000000 Size:0x00000000 [0003.373] I> 41) Base:0x00000000 Size:0x00000000 [0003.378] I> 42) Base:0x00000000 Size:0x00000000 [0003.382] I> 43) Base:0x00000000 Size:0x00000000 [0003.387] I> 44) Base:0x00000000 Size:0x00000000 [0003.391] I> 45) Base:0x00000000 Size:0x00000000 [0003.396] GIC-SPI Target CPU: 0 [0003.399] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.407] I> Heap: [0xa0960000 ... 0xadf00000] [0003.411] initializing threads [0003.414] initializing timers [0003.417] creating bootstrap completion thread [0003.421] top of bootstrap2() [0003.424] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.429] initializing platform [0003.432] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.437] W> device prod register failed [0003.441] I> Bl_dtb @0xadf00000 [0003.444] I> gpio framework initialized [0003.455] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.466] I> fixed regulator driver initialized [0003.479] I> register 'maxim' power off handle [0003.481] I> virtual i2c enabled [0003.482] I> registered 'maxim,max20024' pmic [0003.482] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.485] I> Boot-device: QSPI [0003.488] I> Boot_device: QSPI_FLASH instance: 0 [0003.493] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.503] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.519] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.526] I> rx_clk_tap_delay : 16 [0003.530] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.538] I> qspi flash-0 params source = boot args [0003.542] W> No board IDs available [0003.545] E> Failed to get board id info! [0003.551] I> sdmmc-3 params source = safe params [0003.558] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.564] E> Failed to publish 00000003 [0003.569] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.642] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.744] starting app kernel_boot_app [0003.745] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000601] Console: colour dummy device 80x25 [ 0.002015] printk: console [tty0] enabled [ 0.002075] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002110] pid_max: default: 32768 minimum: 301 [ 0.002297] LSM: Security Framework initializing [ 0.002354] Yama: becoming mindful. [ 0.002396] SELinux: Initializing. [ 0.002547] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002585] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005532] rcu: Hierarchical SRCU implementation. [ 0.005787] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006664] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006738] DTB Build time: Aug 10 2022 20:31:49 [ 0.009653] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009898] Remapping and enabling EFI services. [ 0.012190] smp: Bringing up secondary CPUs ... [ 0.041407] Detected PIPT I-cache on CPU1 [ 0.041497] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073235] Detected PIPT I-cache on CPU2 [ 0.073384] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102959] Detected PIPT I-cache on CPU3 [ 0.103095] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132798] Detected PIPT I-cache on CPU4 [ 0.132904] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162589] Detected PIPT I-cache on CPU5 [ 0.162693] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163046] smp: Brought up 1 node, 6 CPUs [ 0.163189] SMP: Total of 6 processors activated. [ 0.163260] CPU features: detected: Privileged Access Never [ 0.163281] CPU features: detected: LSE atomic instructions [ 0.163293] CPU features: detected: User Access Override [ 0.163305] CPU features: detected: 32-bit EL0 Support [ 0.163316] CPU features: detected: RAS Extension Support [ 0.163327] CPU features: detected: CRC32 instructions [ 0.163339] CPU features: detected: 32-bit EL1 Support [ 0.234517] CPU: All CPU(s) started at EL2 [ 0.240623] devtmpfs: initialized [ 0.286831] Registered cp15_barrier emulation handler [ 0.286962] Registered setend emulation handler [ 0.286987] KASLR enabled [ 0.287221] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287244] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288601] pinctrl core: initialized pinctrl subsystem [ 0.289581] SMBIOS 3.0.0 present. [ 0.289622] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.290306] NET: Registered protocol family 16 [ 0.292250] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292754] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293441] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.293498] audit: initializing netlink subsys (disabled) [ 0.293752] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.294181] thermal_sys: Registered thermal governor 'step_wise' [ 0.294188] thermal_sys: Registered thermal governor 'power_allocator' [ 0.294202] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.296297] cpuidle: using governor menu [ 0.296730] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297169] ASID allocator initialised with 32768 entries [ 0.297389] Serial: AMBA PL011 UART driver [ 0.300465] Tegra reboot handler registered. [ 0.371985] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.372149] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.372320] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.372364] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.372520] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.372577] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.372689] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.372728] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372847] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372885] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.375347] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.375383] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.375410] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.375436] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.375466] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375511] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.375563] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375595] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375623] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375650] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.375674] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.375697] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.375721] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.375744] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.375767] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.375790] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.375813] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.375915] mc-err: mcerr ops are set to t19x [ 0.387521] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.387547] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.387561] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.387574] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.395964] ACPI: Interpreter disabled. [ 0.397750] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.399329] iommu: Default domain type: Translated [ 0.399429] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400045] SCSI subsystem initialized [ 0.400260] usbcore: registered new interface driver usbfs [ 0.400349] usbcore: registered new interface driver hub [ 0.400402] usbcore: registered new device driver usb [ 0.400986] mc: Linux media interface: v0.10 [ 0.401055] videodev: Linux video capture interface: v2.00 [ 0.401466] pps_core: LinuxPPS API ver. 1 registered [ 0.401484] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401515] PTP clock support registered [ 0.401889] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.402384] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.402482] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.403351] Registered efivars operations [ 0.410838] FPGA manager framework [ 0.411041] Advanced Linux Sound Architecture Driver Initialized. [ 0.411854] Bluetooth: Core ver 2.22 [ 0.411907] NET: Registered protocol family 31 [ 0.411925] Bluetooth: HCI device and connection manager initialized [ 0.411950] Bluetooth: HCI socket layer initialized [ 0.411968] Bluetooth: L2CAP socket layer initialized [ 0.412000] Bluetooth: SCO socket layer initialized [ 0.414256] camchar: rtcpu character device driver loaded [ 0.415211] clocksource: Switched to clocksource arch_sys_counter [ 0.877251] VFS: Disk quotas dquot_6.6.0 [ 0.877352] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.877816] pnp: PnP ACPI: disabled [ 0.891919] la/ptsa driver initialized. [ 0.892088] NET: Registered protocol family 2 [ 0.892367] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.901442] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.901591] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.901988] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.902606] TCP: Hash tables configured (established 65536 bind 65536) [ 0.902796] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.902930] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.903277] NET: Registered protocol family 1 [ 0.904188] RPC: Registered named UNIX socket transport module. [ 0.904225] RPC: Registered udp transport module. [ 0.904241] RPC: Registered tcp transport module. [ 0.904256] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.904282] PCI: CLS 0 bytes, default 64 [ 0.904581] Trying to unpack rootfs image as initramfs... [ 1.172407] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.175487] Freeing initrd memory: 8196K [ 1.179613] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.179657] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.179691] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.180042] kvm [1]: IPA Size Limit: 40 bits [ 1.180575] kvm [1]: vgic interrupt IRQ9 [ 1.181119] kvm [1]: VHE mode initialized successfully [ 1.182658] Initialise system trusted keyrings [ 1.183005] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.189135] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.190055] NFS: Registering the id_resolver key type [ 1.190094] Key type id_resolver registered [ 1.190110] Key type id_legacy registered [ 1.190193] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.190218] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.190258] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.200155] NET: Registered protocol family 38 [ 1.200180] Key type asymmetric registered [ 1.200198] Asymmetric key parser 'x509' registered [ 1.200253] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.200560] io scheduler mq-deadline registered [ 1.200579] io scheduler kyber registered [ 1.206724] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.209443] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.209548] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.209647] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.209720] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.209817] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.215486] scrncapt: init (heads:4 wins:6 planes:4) [ 1.215661] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.216484] EINJ: ACPI disabled. [ 1.219805] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.219832] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.219849] tegra-pmc: ### PMC reset level: L1 [ 1.219863] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.219929] tegra-pmc: PMC Prod config success [ 1.224968] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.238327] random: fast init done [ 1.241980] printk: console [ttyTCU0] enabled [ 2.782348] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.787006] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.791558] arm-smmu 10000000.iommu: stage 1 translation [ 2.796836] arm-smmu 10000000.iommu: stage 2 translation [ 2.802235] arm-smmu 10000000.iommu: nested translation [ 2.807860] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.814773] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.825533] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.828131] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.834950] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.842720] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.847731] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.852455] arm-smmu 12000000.iommu: stage 1 translation [ 2.858231] arm-smmu 12000000.iommu: stage 2 translation [ 2.863648] arm-smmu 12000000.iommu: nested translation [ 2.868824] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.876252] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.886549] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.889149] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.895933] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.903293] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.912771] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.916099] tegra_profiler: auth: init [ 2.920620] THERMAL EST: found 3 subdevs [ 2.923781] THERMAL EST num_resources: 0 [ 2.927623] [THERMAL EST subdev 0] [ 2.931180] [THERMAL EST subdev 1] [ 2.934366] [THERMAL EST subdev 2] [ 2.937854] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.944044] THERMAL EST: thz register success. [ 2.948290] THERMAL EST: end of probe, return err: 0 [ 2.953637] nvsciipc: loaded module [ 2.960778] tun: Universal TUN/TAP device driver, 1.6 [ 2.963120] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.969361] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.975178] e1000e: Intel(R) PRO/1000 Network Driver [ 2.979859] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.986188] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.991484] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.997641] PPP generic driver version 2.4.2 [ 3.001911] PPP BSD Compression module registered [ 3.006487] PPP Deflate Compression module registered [ 3.011710] PPP MPPE Compression module registered [ 3.016753] usbcore: registered new interface driver r8152 [ 3.021998] usbcore: registered new interface driver asix [ 3.027564] usbcore: registered new interface driver ax88179_178a [ 3.033695] usbcore: registered new interface driver cdc_ether [ 3.039645] usbcore: registered new interface driver net1080 [ 3.045249] usbcore: registered new interface driver cdc_subset [ 3.051015] usbcore: registered new interface driver zaurus [ 3.056973] usbcore: registered new interface driver cdc_ncm [ 3.062651] usbcore: registered new interface driver aqc111 [ 3.068307] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.074112] ohci-pci: OHCI PCI platform driver [ 3.078691] ohci-platform: OHCI generic platform driver [ 3.084291] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.090566] usbcore: registered new interface driver uas [ 3.094730] usbcore: registered new interface driver usb-storage [ 3.101163] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.107186] mousedev: PS/2 mouse device common for all mice [ 3.111861] usbcore: registered new interface driver xpad [ 3.119981] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.122582] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.130397] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.137195] i2c /dev entries driver [ 3.140307] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.146097] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.151759] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.157087] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.162167] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.167658] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.173065] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.186456] device-mapper: uevent: version 1.0.3 [ 3.186947] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.193515] cpuidle: Initializing cpuidle driver [ 3.197739] sdhci: Secure Digital Host Controller Interface driver [ 3.202204] sdhci: Copyright(c) Pierre Ossman [ 3.206557] Synopsys Designware Multimedia Card Interface Driver [ 3.212746] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.218497] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.219271] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.231989] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.254066] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.263523] vdd-1v0: supplied by regulator-dummy [ 3.269044] vdd-1v8-hs: supplied by regulator-dummy [ 3.273902] vdd-1v8-ls: supplied by regulator-dummy [ 3.278689] vdd-1v8-ao: supplied by regulator-dummy [ 3.282633] vddio-ddr-1v1: supplied by regulator-dummy [ 3.287070] vdd-rtc: supplied by regulator-dummy [ 3.288861] spmic-ldo1: supplied by regulator-dummy [ 3.290095] vdd-ao-3v3: supplied by regulator-dummy [ 3.296286] vddio-emmc-3v3: supplied by regulator-dummy [ 3.302614] spmic-ldo4: supplied by regulator-dummy [ 3.303838] vdd-usb-3v3: supplied by regulator-dummy [ 3.310034] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.316333] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.321938] spmic-ldo8: supplied by vdd-1v8-ls [ 3.323463] gpio-510 (gpio_default): hogged as output/high [ 3.324936] gpio-511 (gpio_default): hogged as output/high [ 3.327837] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.464463] max77686-rtc max77620-rtc: registered as rtc0 [ 3.465568] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.465951] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.302664] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.303796] hid: raw HID events driver (C) Jiri Kosina [ 4.304605] usbcore: registered new interface driver usbhid [ 4.304752] usbhid: USB HID core driver [ 4.306927] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.308597] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.012658] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.086729] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.879 ms) ÿá[ 4.393054] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.393637] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.394637] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.395526] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.397364] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.397982] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.398546] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.400116] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.400353] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.403096] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.410124] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.416059] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.421225] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.426366] denver_knobs_init:MTS_VERSION:55637613 [ 4.440361] t19x_cache tegra-cache: probed [ 4.443168] optee: probing for conduit method. [ 4.444040] optee: revision 3.16 (65cc2218) [ 4.444928] optee: dynamic shared memory is enabled [ 4.447639] optee: initialized driver [ 4.454086] nvpmodel: initialized successfully [ 4.455050] tegra_hv: get_hvd: not initialized yet [ 4.460046] user_ivc_mempool: hypervisor not present [ 4.465695] usbcore: registered new interface driver snd-usb-audio [ 4.472317] u32 classifier [ 4.473747] input device check on [ 4.477465] Actions configured [ 4.480926] Initializing XFRM netlink socket [ 4.485786] NET: Registered protocol family 10 [ 4.492191] Segment Routing with IPv6 [ 4.493346] NET: Registered protocol family 17 [ 4.497376] NET: Registered protocol family 15 [ 4.502143] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.515771] Bluetooth: RFCOMM socket layer initialized [ 4.520037] Bluetooth: RFCOMM ver 1.11 [ 4.524273] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.529800] Bluetooth: HIDP socket layer initialized [ 4.536006] 9pnet: Installing 9P2000 support [ 4.539502] Key type dns_resolver registered [ 4.544586] registered taskstats version 1 [ 4.547780] Loading compiled-in X.509 certificates [ 4.560972] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.563767] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.573671] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.575905] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.584471] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.592550] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.707310] tegra194-pcie 14160000.pcie: Link up [ 4.710440] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.710628] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.710898] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.711192] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.711492] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.711849] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.712296] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.723938] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.724364] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.724803] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.726482] pci 0004:01:00.0: supports D1 D2 [ 4.726656] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.739800] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.740281] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.740686] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.741333] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.741684] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.742033] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.742340] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.749297] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.758048] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.768212] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.772643] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.778799] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.785343] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.794085] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.795733] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.804509] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.812673] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.927912] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.928411] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.928636] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.928775] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.929005] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.929184] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.929642] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.930133] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.950320] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.950730] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.952891] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.954550] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.956555] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.958057] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.959341] pci 0005:00:00.0: Removing from iommu group 7 [ 5.959609] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.994306] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.021707] host1x 13e10000.host1x: initialized [ 6.023452] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.024319] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.025544] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.026169] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.027472] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.028022] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.029505] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.030142] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.031178] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.031872] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.038132] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.044781] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.054671] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.061698] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.072015] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.078799] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.088678] falcon 15340000.vic: Adding to iommu group 17 [ 6.104347] falcon 15340000.vic: initialized [ 6.105384] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.111504] falcon 15380000.nvjpg: initialized [ 6.112143] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.122213] falcon 154c0000.nvenc: initialized [ 6.122774] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.132267] falcon 15a80000.nvenc1: initialized [ 6.132910] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.144556] nvdec 15480000.nvdec: initialized [ 6.145215] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.155864] nvdec 15140000.nvdec1: initialized [ 6.156455] tsec 15500000.tsec: Adding to iommu group 18 [ 6.162566] tsec 15500000.tsec: initialized [ 6.163088] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.169522] tsec 15100000.tsecb: initialized [ 6.173266] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.201690] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.214082] gpio-374 (wifi-enable): hogged as output/high [ 6.214393] gpio-431 (camera-control-output-low): hogged as output/low [ 6.214763] gpio-432 (camera-control-output-low): hogged as output/low [ 6.216399] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.218320] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.218866] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.220343] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.225682] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.231389] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.236933] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.245476] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.252636] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.264345] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.269231] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.274916] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.284050] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.293034] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.300204] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.307859] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.314297] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.323759] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.330202] pva 16000000.pva0: Adding to iommu group 22 [ 6.357255] pva 16000000.pva0: initialized [ 6.361827] pva 16800000.pva1: Adding to iommu group 23 [ 6.373651] pva 16800000.pva1: initialized [ 6.378111] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.391323] nvdla 15880000.nvdla0: initialized [ 6.392720] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.410024] nvdla 158c0000.nvdla1: initialized [ 6.413959] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.414023] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.414169] tegradc 15200000.display: Adding to iommu group 26 [ 6.414296] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.414603] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.415498] tegradccommon 15200000.display-hub: dma mapping done [ 6.415867] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.416813] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.419755] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.421354] tegradc 15210000.display: Adding to iommu group 26 [ 6.421458] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.421570] generic_infoframe_type: 0x87 [ 6.421655] tegradc 15200000.display: DT parsed successfully [ 6.421731] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.425221] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.425232] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.425237] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.425345] tegra_cec 3960000.tegra_cec: probed [ 6.426116] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.426197] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.428640] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.429008] kfuse 3830000.kfuse: initialized [ 6.429522] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.429533] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.429999] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.430856] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.432496] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.437854] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.439898] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.442200] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.450464] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.456639] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.464358] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.473150] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.482892] tegradc 15210000.display: disp0 connected to head1->sor [ 6.498280] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.503695] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.507191] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.514294] tegradc 15210000.display: DT parsed successfully [ 6.520264] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.526360] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.536072] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.545890] random: crng init done [ 6.547753] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.664660] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.672029] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.679245] usb usb1: Product: xHCI Host Controller [ 6.684418] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.690631] usb usb1: SerialNumber: 3610000.xhci [ 6.696876] hub 1-0:1.0: USB hub found [ 6.699039] hub 1-0:1.0: 4 ports detected [ 6.704105] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.708925] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.716256] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.723980] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.732030] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.739278] usb usb2: Product: xHCI Host Controller [ 6.743990] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.750200] usb usb2: SerialNumber: 3610000.xhci [ 6.755853] hub 2-0:1.0: USB hub found [ 6.758890] hub 2-0:1.0: 4 ports detected [ 6.801219] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.807853] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.809429] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.809661] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.823172] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.824333] tegra194-cpufreq ccplex: probed with BWMGR [ 6.825555] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.826021] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.826514] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.827658] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.835279] tegra194-vi5 15c10000.vi: initialized [ 6.837039] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.838193] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.839134] generic_infoframe_type: 0x87 [ 6.845332] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.849330] tegradc 15200000.display: DT parsed successfully [ 6.857144] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.857152] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.857162] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.863032] tegradc 15200000.display: Display dc.00000000e38068e7 registered with id=0 [ 6.863038] mmc0: CQHCI version 5.10 [ 6.869500] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.877020] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.891262] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.894060] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.900870] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.900878] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.937102] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.946035] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.951721] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.958114] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.958386] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.958402] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.963245] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.966482] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.983588] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.990382] nvethernet 2490000.ethernet: Macsec not supported [ 7.011993] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 7.014502] tegradc 15200000.display: probed [ 7.020252] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 7.029680] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.037066] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.044825] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.051805] tegra-se-nvhost 15810000.se: initialized [ 7.060155] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.061155] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.067702] tegra-se-nvhost 15820000.se: initialized [ 7.073846] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.078781] Console: switching to colour frame buffer device 240x67 [ 7.078884] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.084726] tegradc 15200000.display: fb registered [ 7.095789] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.101652] tegra-se-nvhost 15830000.se: initialized [ 7.102441] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.107254] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.112240] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.118631] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.119464] mmc0: Command Queue Engine enabled [ 7.119470] mmc0: periodic cache flush enabled [ 7.119484] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.119981] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.120133] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.123906] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.143184] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.146396] tegra-se-nvhost 15840000.se: initialized [ 7.150153] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.150158] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.150162] usb 1-2: Manufacturer: Generic [ 7.152194] hub 1-2:1.0: USB hub found [ 7.159520] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.166682] hub 1-2:1.0: 4 ports detected [ 7.175324] tegra_actmon d230000.actmon: in actmon_register()... [ 7.192051] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.198955] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.206260] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.215508] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.223810] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.229855] hvc_sysfs: hypervisor is not present [ 7.237846] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.264817] Extcon AUX1(HDMI) enable [ 7.268585] tegradc 15210000.display: disp1 connected to head1->sor [ 7.272102] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.274484] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.289453] tegradc 15210000.display: DT parsed successfully [ 7.295074] tegradc 15210000.display: Display dc.000000006a128e6e registered with id=1 [ 7.295583] ALSA device list: [ 7.303249] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.306016] No soundcards found. [ 7.312467] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.316822] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.328569] tegradc 15210000.display: probed [ 7.330156] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.341781] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.341786] usb 2-3: Manufacturer: Generic [ 7.351039] tegradc 15210000.display: fb registered [ 7.352758] hub 2-3:1.0: USB hub found [ 7.354444] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.354449] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.354457] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.356632] Freeing unused kernel memory: 3968K [ 7.361737] hub 2-3:1.0: 4 ports detected [ 7.375387] Run /init as init process [ 7.392545] tegradc 15210000.display: blank - powerdown [ 7.397644] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.397648] Extcon DP: HPD disabled [ 7.397652] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.397662] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.397676] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.423257] tegra_cec 3960000.tegra_cec: physical address: 10:00. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.435062] tegradc 15200000.display: blank - powerdown [ 7.435269] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.456518] Root device found: mmcblk0p1 [ 7.458494] Found dev node: /dev/mmcblk0p1 [ 7.475891] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.475898] Extcon AUX1(HDMI) disable [ 7.487796] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.487801] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.493251] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.497409] Rootfs mounted over mmcblk0p1 [ 7.499001] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.499839] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.513073] tegradc 15200000.display: unblank [ 7.514175] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.514363] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.520463] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.522352] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.526086] Switching from initrd to actual rootfs [ 7.526306] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.526311] Extcon AUX1(HDMI) enable [ 7.539134] tegradc 15200000.display: sync windows ret = 247 [ 7.575684] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.578136] Extcon HDMI: HPD enabled [ 7.582091] tegradc 15200000.display: hdmi: plugged [ 7.588564] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.595262] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.602572] usb 1-3: Product: Bluetooth Radio [ 7.606792] usb 1-3: Manufacturer: Realtek [ 7.610880] usb 1-3: SerialNumber: 00e04c000001 [ 7.696344] systemd[1]: System time before build time, advancing clock. [ 7.767449] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.772522] systemd[1]: Detected architecture arm64. [ 7.817985] systemd[1]: Set hostname to . [ 7.985802] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.340652] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.342429] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.348059] systemd[1]: Created slice system-modprobe.slice. [ 8.352835] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.357147] systemd[1]: Created slice User and Session Slice. [ 8.360716] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.365173] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.368729] systemd[1]: Reached target User and Group Name Lookups. [ 8.372100] systemd[1]: Reached target Slices. [ 8.375359] systemd[1]: Reached target Swap. [ 8.379520] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.383245] systemd[1]: Listening on Syslog Socket. [ 8.386874] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.390362] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.394716] systemd[1]: Listening on Journal Audit Socket. [ 8.398365] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.402243] systemd[1]: Listening on Journal Socket. [ 8.406040] systemd[1]: Listening on udev Control Socket. [ 8.409646] systemd[1]: Listening on udev Kernel Socket. [ 8.417916] systemd[1]: Mounting Huge Pages File System... [ 8.426442] systemd[1]: Mounting POSIX Message Queue File System... [ 8.437771] systemd[1]: Mounting RPC Pipe File System... [ 8.446758] systemd[1]: Mounting Kernel Debug File System... [ 8.455540] systemd[1]: Mounting Kernel Trace File System... [ 8.465486] systemd[1]: Starting Journal Service... [ 8.474749] systemd[1]: Starting Set the console keyboard layout... [ 8.483295] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.486953] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.493742] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.502223] systemd[1]: Started Nameserver information manager. [ 8.506965] systemd[1]: Reached target Network (Pre). [ 8.515475] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.517318] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.525318] systemd[1]: Starting Load Kernel Modules... [ 8.534679] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.545299] systemd[1]: Starting udev Coldplug all Devices... [ 8.557981] systemd[1]: Mounted Huge Pages File System. [ 8.562020] systemd[1]: Mounted POSIX Message Queue File System. [ 8.564551] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.565268] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.569352] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.570994] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.571497] systemd[1]: Mounted RPC Pipe File System. [ 8.572785] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.575664] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.575830] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.576174] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.576350] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.576364] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.585628] systemd[1]: Mounted Kernel Debug File System. [ 8.589404] systemd[1]: Mounted Kernel Trace File System. [ 8.596431] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.601454] systemd[1]: nvfb-udev.service: Succeeded. [ 8.606017] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.616343] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.629061] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.630952] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.639080] systemd[1]: Starting Load/Save Random Seed... [ 8.647604] systemd[1]: Starting Create System Users... [ 8.666796] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.666796] [ 8.692853] systemd[1]: Finished Load/Save Random Seed. [ 8.702518] systemd[1]: Finished Load Kernel Modules. [ 8.707510] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.714516] systemd[1]: Mounting Kernel Configuration File System... [ 8.723519] systemd[1]: Started OP-TEE Client Supplicant. [ 8.732430] systemd[1]: Starting Apply Kernel Variables... [ 8.742568] systemd[1]: Finished Set the console keyboard layout. [ 8.746958] systemd[1]: Mounted Kernel Configuration File System. [ 8.757491] systemd[1]: Finished Create System Users. [ 10.147643] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.155485] imx219 9-0010: board setup failed [ 10.157073] imx219: probe of 9-0010 failed with error -121 [ 10.169321] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.175929] imx219 10-0010: board setup failed [ 10.177393] imx219: probe of 10-0010 failed with error -121 [ 10.282313] hot-surface-alert cooling state: 0 -> 1 [ 11.050044] using random self ethernet address [ 11.074759] using random host ethernet address [ 11.957129] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.958523] Creating 1 MTD partitions on "spi6.0": [ 11.959865] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.466840] using random self ethernet address [ 12.466848] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.787901] nvidia: loading out-of-tree module taints kernel. [ 59.384764] watchdog: watchdog0: watchdog did not stop! [ 59.868865] Trying to unregister non-registered hwtime source [ 62.933227] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.934887] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ôÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.325] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿänal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thuÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿäAÿâpm_post initialized dbells initialized ÿäug ÿâdmce initialized cvc initialized ÿä11 03:23:20 ÿâavfs_clk_mach_post initialized ÿäUTC 2ÿâavfs_clk_platform_post initialized ÿä02ÿâcvc_late initialized regulator_post initialized ÿä2 aarÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäch64 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.644] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.744] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000090974000-0x00000000a0974000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000718] Console: colour dummy device 80x25 [ 0.002207] printk: console [tty0] enabled [ 0.002268] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002305] pid_max: default: 32768 minimum: 301 [ 0.002544] LSM: Security Framework initializing [ 0.002603] Yama: becoming mindful. [ 0.002665] SELinux: Initializing. [ 0.002814] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002860] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005835] rcu: Hierarchical SRCU implementation. [ 0.006125] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006852] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006897] DTB Build time: Aug 10 2022 20:31:49 [ 0.009698] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009997] Remapping and enabling EFI services. [ 0.012001] smp: Bringing up secondary CPUs ... [ 0.042789] Detected PIPT I-cache on CPU1 [ 0.042866] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072425] Detected PIPT I-cache on CPU2 [ 0.072575] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102226] Detected PIPT I-cache on CPU3 [ 0.102362] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132122] Detected PIPT I-cache on CPU4 [ 0.132361] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162073] Detected PIPT I-cache on CPU5 [ 0.162229] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162626] smp: Brought up 1 node, 6 CPUs [ 0.162852] SMP: Total of 6 processors activated. [ 0.162918] CPU features: detected: Privileged Access Never [ 0.162944] CPU features: detected: LSE atomic instructions [ 0.162959] CPU features: detected: User Access Override [ 0.162972] CPU features: detected: 32-bit EL0 Support [ 0.162986] CPU features: detected: RAS Extension Support [ 0.162998] CPU features: detected: CRC32 instructions [ 0.163012] CPU features: detected: 32-bit EL1 Support [ 0.229740] CPU: All CPU(s) started at EL2 [ 0.235693] devtmpfs: initialized [ 0.287761] Registered cp15_barrier emulation handler [ 0.287910] Registered setend emulation handler [ 0.287933] KASLR enabled [ 0.288257] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288285] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289754] pinctrl core: initialized pinctrl subsystem [ 0.290846] SMBIOS 3.0.0 present. [ 0.290874] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291521] NET: Registered protocol family 16 [ 0.293466] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293962] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294904] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294965] audit: initializing netlink subsys (disabled) [ 0.295235] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.295735] thermal_sys: Registered thermal governor 'step_wise' [ 0.295741] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295755] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298049] cpuidle: using governor menu [ 0.298381] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.298831] ASID allocator initialised with 32768 entries [ 0.299093] Serial: AMBA PL011 UART driver [ 0.302543] Tegra reboot handler registered. [ 0.375636] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375744] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.375924] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.375974] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376113] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376171] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376283] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.376322] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376433] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376471] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.378698] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.378730] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.378758] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.378785] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.378813] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.378839] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.378877] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.378908] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.378934] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.378958] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.378981] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379004] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379027] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379050] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379073] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379096] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379119] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.379205] mc-err: mcerr ops are set to t19x [ 0.390741] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390771] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390783] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390811] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397562] ACPI: Interpreter disabled. [ 0.398886] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400277] iommu: Default domain type: Translated [ 0.400338] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400740] SCSI subsystem initialized [ 0.400897] usbcore: registered new interface driver usbfs [ 0.400940] usbcore: registered new interface driver hub [ 0.400975] usbcore: registered new device driver usb [ 0.401415] mc: Linux media interface: v0.10 [ 0.401444] videodev: Linux video capture interface: v2.00 [ 0.401830] pps_core: LinuxPPS API ver. 1 registered [ 0.401842] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401865] PTP clock support registered [ 0.402092] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.402358] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.402440] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.403022] Registered efivars operations [ 0.407773] FPGA manager framework [ 0.407874] Advanced Linux Sound Architecture Driver Initialized. [ 0.408408] Bluetooth: Core ver 2.22 [ 0.408444] NET: Registered protocol family 31 [ 0.408456] Bluetooth: HCI device and connection manager initialized [ 0.408471] Bluetooth: HCI socket layer initialized [ 0.408487] Bluetooth: L2CAP socket layer initialized [ 0.408508] Bluetooth: SCO socket layer initialized [ 0.410979] camchar: rtcpu character device driver loaded [ 0.411943] clocksource: Switched to clocksource arch_sys_counter [ 0.828465] VFS: Disk quotas dquot_6.6.0 [ 0.828555] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.829039] pnp: PnP ACPI: disabled [ 0.844208] la/ptsa driver initialized. [ 0.844405] NET: Registered protocol family 2 [ 0.844624] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.852196] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.852400] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.852772] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.853402] TCP: Hash tables configured (established 65536 bind 65536) [ 0.853570] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.853723] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.853971] NET: Registered protocol family 1 [ 0.854827] RPC: Registered named UNIX socket transport module. [ 0.854886] RPC: Registered udp transport module. [ 0.854907] RPC: Registered tcp transport module. [ 0.854927] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.854959] PCI: CLS 0 bytes, default 64 [ 0.855300] Trying to unpack rootfs image as initramfs... [ 1.119354] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.122373] Freeing initrd memory: 8196K [ 1.127153] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.127183] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.127217] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.127632] kvm [1]: IPA Size Limit: 40 bits [ 1.128285] kvm [1]: vgic interrupt IRQ9 [ 1.128864] kvm [1]: VHE mode initialized successfully [ 1.130456] Initialise system trusted keyrings [ 1.130756] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.136374] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.137160] NFS: Registering the id_resolver key type [ 1.137194] Key type id_resolver registered [ 1.137208] Key type id_legacy registered [ 1.137299] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.137324] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.137364] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.147206] NET: Registered protocol family 38 [ 1.147228] Key type asymmetric registered [ 1.147243] Asymmetric key parser 'x509' registered [ 1.147318] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.147642] io scheduler mq-deadline registered [ 1.147661] io scheduler kyber registered [ 1.153682] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.156944] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.157021] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.157091] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.157160] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.157227] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.163801] scrncapt: init (heads:4 wins:6 planes:4) [ 1.164054] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.165128] EINJ: ACPI disabled. [ 1.168592] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.168615] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.168629] tegra-pmc: ### PMC reset level: L1 [ 1.168642] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.168686] tegra-pmc: PMC Prod config success [ 1.173685] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.199290] random: fast init done [ 1.201892] printk: console [ttyTCU0] enabled [ 2.730827] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.735648] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.740319] arm-smmu 10000000.iommu: stage 1 translation [ 2.745455] arm-smmu 10000000.iommu: stage 2 translation [ 2.751204] arm-smmu 10000000.iommu: nested translation [ 2.756305] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.763471] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.774577] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.776590] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.783402] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.790885] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.796445] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.801179] arm-smmu 12000000.iommu: stage 1 translation [ 2.806425] arm-smmu 12000000.iommu: stage 2 translation [ 2.812109] arm-smmu 12000000.iommu: nested translation [ 2.817537] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.824713] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.835443] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.837835] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.844144] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.851803] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.861448] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.864851] tegra_profiler: auth: init [ 2.869183] THERMAL EST: found 3 subdevs [ 2.872235] THERMAL EST num_resources: 0 [ 2.876333] [THERMAL EST subdev 0] [ 2.879376] [THERMAL EST subdev 1] [ 2.883073] [THERMAL EST subdev 2] [ 2.886077] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.892497] THERMAL EST: thz register success. [ 2.896763] THERMAL EST: end of probe, return err: 0 [ 2.902300] nvsciipc: loaded module [ 2.909260] tun: Universal TUN/TAP device driver, 1.6 [ 2.911681] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.918160] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.923509] e1000e: Intel(R) PRO/1000 Network Driver [ 2.928607] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.934390] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.939950] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.946136] PPP generic driver version 2.4.2 [ 2.950377] PPP BSD Compression module registered [ 2.954924] PPP Deflate Compression module registered [ 2.959907] PPP MPPE Compression module registered [ 2.965176] usbcore: registered new interface driver r8152 [ 2.970682] usbcore: registered new interface driver asix [ 2.975764] usbcore: registered new interface driver ax88179_178a [ 2.981892] usbcore: registered new interface driver cdc_ether [ 2.988098] usbcore: registered new interface driver net1080 [ 2.993699] usbcore: registered new interface driver cdc_subset [ 2.999472] usbcore: registered new interface driver zaurus [ 3.005177] usbcore: registered new interface driver cdc_ncm [ 3.010845] usbcore: registered new interface driver aqc111 [ 3.016485] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.022822] ohci-pci: OHCI PCI platform driver [ 3.026866] ohci-platform: OHCI generic platform driver [ 3.032833] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.039347] usbcore: registered new interface driver uas [ 3.043430] usbcore: registered new interface driver usb-storage [ 3.049573] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.055274] mousedev: PS/2 mouse device common for all mice [ 3.060308] usbcore: registered new interface driver xpad [ 3.068413] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.071028] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.078881] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.085445] i2c /dev entries driver [ 3.088751] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.094490] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.100090] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.105490] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.110846] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.116391] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.121771] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.135811] device-mapper: uevent: version 1.0.3 [ 3.136313] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.142274] cpuidle: Initializing cpuidle driver [ 3.145968] sdhci: Secure Digital Host Controller Interface driver [ 3.150655] sdhci: Copyright(c) Pierre Ossman [ 3.155017] Synopsys Designware Multimedia Card Interface Driver [ 3.160955] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.166948] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.167729] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.180180] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.202327] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.212207] vdd-1v0: supplied by regulator-dummy [ 3.217692] vdd-1v8-hs: supplied by regulator-dummy [ 3.222510] vdd-1v8-ls: supplied by regulator-dummy [ 3.227281] vdd-1v8-ao: supplied by regulator-dummy [ 3.231221] vddio-ddr-1v1: supplied by regulator-dummy [ 3.235681] vdd-rtc: supplied by regulator-dummy [ 3.237458] spmic-ldo1: supplied by regulator-dummy [ 3.238672] vdd-ao-3v3: supplied by regulator-dummy [ 3.244851] vddio-emmc-3v3: supplied by regulator-dummy [ 3.251154] spmic-ldo4: supplied by regulator-dummy [ 3.252404] vdd-usb-3v3: supplied by regulator-dummy [ 3.258551] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.264786] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.270307] spmic-ldo8: supplied by vdd-1v8-ls [ 3.271843] gpio-510 (gpio_default): hogged as output/high [ 3.273266] gpio-511 (gpio_default): hogged as output/high [ 3.276132] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.412949] max77686-rtc max77620-rtc: registered as rtc0 [ 3.414284] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.414660] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.198198] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.199524] hid: raw HID events driver (C) Jiri Kosina [ 4.200433] usbcore: registered new interface driver usbhid [ 4.200602] usbhid: USB HID core driver [ 4.202796] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.204194] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.162113] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.236001] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.697 ms) ÿá[ 4.287994] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.288640] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.289578] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.290220] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.291833] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.292582] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.293171] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.294343] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.294587] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.297258] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.304783] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.310642] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.316199] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.321521] denver_knobs_init:MTS_VERSION:55637613 [ 4.333966] t19x_cache tegra-cache: probed [ 4.337033] optee: probing for conduit method. [ 4.337927] optee: revision 3.16 (65cc2218) [ 4.338914] optee: dynamic shared memory is enabled [ 4.343012] optee: initialized driver [ 4.349734] nvpmodel: initialized successfully [ 4.350731] tegra_hv: get_hvd: not initialized yet [ 4.355513] user_ivc_mempool: hypervisor not present [ 4.361033] usbcore: registered new interface driver snd-usb-audio [ 4.367892] u32 classifier [ 4.369275] input device check on [ 4.373022] Actions configured [ 4.376328] Initializing XFRM netlink socket [ 4.381198] NET: Registered protocol family 10 [ 4.387329] Segment Routing with IPv6 [ 4.388627] NET: Registered protocol family 17 [ 4.393118] NET: Registered protocol family 15 [ 4.397407] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.411115] Bluetooth: RFCOMM socket layer initialized [ 4.415629] Bluetooth: RFCOMM ver 1.11 [ 4.419712] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.425299] Bluetooth: HIDP socket layer initialized [ 4.431403] 9pnet: Installing 9P2000 support [ 4.435078] Key type dns_resolver registered [ 4.440526] registered taskstats version 1 [ 4.443179] Loading compiled-in X.509 certificates [ 4.455244] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.459168] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.468437] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.471070] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.479979] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.488123] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.604070] tegra194-pcie 14160000.pcie: Link up [ 4.606835] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.607086] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.607244] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.607483] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.607690] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.608113] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.608543] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.618365] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.618983] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.619423] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.621010] pci 0004:01:00.0: supports D1 D2 [ 4.621163] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.629564] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.630002] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.630268] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.630720] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.631019] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.632669] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.638748] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.646078] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.654860] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.664897] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.669557] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.674869] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.681676] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.691368] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.692665] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.701042] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.709730] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.825011] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.825803] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.826007] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.826159] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.826403] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.826640] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.827024] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.827467] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.844241] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.844544] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.846543] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.848200] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.849778] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.851422] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.852522] pci 0005:00:00.0: Removing from iommu group 7 [ 5.852864] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.883341] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.904658] host1x 13e10000.host1x: initialized [ 5.906425] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.907355] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.908868] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.909577] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.910621] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.911227] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.912327] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.912889] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.918074] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.925206] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.935100] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.942250] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.952380] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.959379] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.969094] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.976010] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.985968] falcon 15340000.vic: Adding to iommu group 17 [ 6.000231] falcon 15340000.vic: initialized [ 6.001139] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.006297] falcon 15380000.nvjpg: initialized [ 6.006887] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.018262] falcon 154c0000.nvenc: initialized [ 6.018756] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.028252] falcon 15a80000.nvenc1: initialized [ 6.028753] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.040727] nvdec 15480000.nvdec: initialized [ 6.041355] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.051589] nvdec 15140000.nvdec1: initialized [ 6.052091] tsec 15500000.tsec: Adding to iommu group 18 [ 6.057600] tsec 15500000.tsec: initialized [ 6.058029] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.065607] tsec 15100000.tsecb: initialized [ 6.069207] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.094679] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.105259] gpio-374 (wifi-enable): hogged as output/high [ 6.105557] gpio-431 (camera-control-output-low): hogged as output/low [ 6.105862] gpio-432 (camera-control-output-low): hogged as output/low [ 6.107266] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.108696] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.110578] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.117247] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.122495] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.128384] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.133613] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.141815] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.149734] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.161694] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.166089] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.172052] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.180876] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.190299] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.197507] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.205436] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.211488] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.221039] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.227688] pva 16000000.pva0: Adding to iommu group 22 [ 6.253728] pva 16000000.pva0: initialized [ 6.258470] pva 16800000.pva1: Adding to iommu group 23 [ 6.269408] pva 16800000.pva1: initialized [ 6.274127] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.294142] nvdla 15880000.nvdla0: initialized [ 6.295369] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.304439] nvdla 158c0000.nvdla1: initialized [ 6.307013] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.307289] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.307387] tegradc 15200000.display: Adding to iommu group 26 [ 6.307580] tegradccommon 15200000.display-hub: dma mapping done [ 6.314947] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.315381] generic_infoframe_type: 0x87 [ 6.315663] tegradc 15200000.display: DT parsed successfully [ 6.317082] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.317361] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.318233] tegradc 15210000.display: Adding to iommu group 26 [ 6.320950] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.334699] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.341457] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.346768] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.352396] tegra_cec 3960000.tegra_cec: probed [ 6.357179] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.357978] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.365349] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.365359] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.379471] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.389918] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.393070] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.400548] kfuse 3830000.kfuse: initialized [ 6.411093] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.411329] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.428036] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.435263] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.435497] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.448334] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.448592] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.456594] tegradc 15210000.display: disp0 connected to head1->sor [ 6.465503] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.470054] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.476410] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.483119] tegradc 15210000.display: DT parsed successfully [ 6.493091] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.497361] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.511416] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.531465] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.531864] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.534611] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.543249] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.551715] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.558388] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.566054] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.573153] usb usb1: Product: xHCI Host Controller [ 6.578019] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.584324] usb usb1: SerialNumber: 3610000.xhci [ 6.590390] hub 1-0:1.0: USB hub found [ 6.593237] hub 1-0:1.0: 4 ports detected [ 6.597417] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.602559] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.610159] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.617650] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.625523] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.632729] usb usb2: Product: xHCI Host Controller [ 6.637950] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.643902] usb usb2: SerialNumber: 3610000.xhci [ 6.649532] hub 2-0:1.0: USB hub found [ 6.652677] hub 2-0:1.0: 4 ports detected [ 6.692752] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.698581] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.699901] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.700241] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.713673] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.714698] tegra194-cpufreq ccplex: probed with BWMGR [ 6.715812] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.716597] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.717063] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.718335] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.728021] mmc0: CQHCI version 5.10 [ 6.729253] tegra194-vi5 15c10000.vi: initialized [ 6.731380] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.732701] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.736495] generic_infoframe_type: 0x87 [ 6.742686] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.746707] tegradc 15200000.display: DT parsed successfully [ 6.754513] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.754527] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.760054] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.766607] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.774868] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.781441] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.799991] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.800350] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.802572] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.809092] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.809099] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.839054] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.847623] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.848059] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.852790] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.866504] nvethernet 2490000.ethernet: Macsec not supported [ 6.866536] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.872509] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.873618] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.874703] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.874837] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.874955] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.875922] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.877580] tegra-se-nvhost 15810000.se: initialized [ 6.882849] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.891222] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.898358] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.903957] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.911595] tegra-se-nvhost 15820000.se: initialized [ 6.920157] tegradc 15200000.display: probed [ 6.926190] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.964470] mmc0: Command Queue Engine enabled [ 6.966347] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.972022] mmc0: periodic cache flush enabled [ 6.972038] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.977295] tegra-se-nvhost 15830000.se: initialized [ 6.983278] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.988089] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.993621] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.998969] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.014226] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.016920] tegra-se-nvhost 15840000.se: initialized [ 7.035732] Console: switching to colour frame buffer device 240x67 [ 7.037149] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.041787] tegradc 15200000.display: fb registered [ 7.041856] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.049697] tegra_actmon d230000.actmon: in actmon_register()... [ 7.053752] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.064320] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.070634] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.075535] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.082015] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.089982] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.098825] hvc_sysfs: hypervisor is not present [ 7.105448] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.105457] usb 1-2: Manufacturer: Generic [ 7.120764] hub 1-2:1.0: USB hub found [ 7.123905] hub 1-2:1.0: 4 ports detected [ 7.138717] ALSA device list: [ 7.138806] No soundcards found. [ 7.138889] random: crng init done [ 7.139973] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.146938] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.153772] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.162186] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.168714] Extcon AUX1(HDMI) enable [ 7.172061] tegradc 15210000.display: disp1 connected to head1->sor [ 7.178592] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.185686] tegradc 15210000.display: DT parsed successfully [ 7.191028] tegradc 15210000.display: Display dc.0000000093a65d8f registered with id=1 [ 7.198764] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.203052] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.212575] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.225998] tegradc 15210000.display: probed [ 7.226360] tegradc 15210000.display: fb registered [ 7.231806] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.235444] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.237395] Freeing unused kernel memory: 3968K [ 7.243599] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.253516] tegradc 15210000.display: blank - powerdown [ 7.258632] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.260202] Run /init as init process [ 7.267172] Extcon DP: HPD disabled [ 7.274235] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.274240] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.274251] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.282382] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.282388] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.282413] usb 2-3: Manufacturer: Generic [ 7.289503] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.326891] hub 2-3:1.0: USB hub found [ 7.328878] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.334149] tegradc 15200000.display: blank - powerdown [ 7.364011] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.368054] Root device found: mmcblk0p1 [ 7.370116] Found dev node: /dev/mmcblk0p1 [ 7.370726] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.373662] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.373687] Extcon AUX1(HDMI) disable [ 7.396988] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.397892] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.404682] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.408880] Rootfs mounted over mmcblk0p1 [ 7.411685] tegradc 15200000.display: unblank [ 7.412813] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.413003] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.419074] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.421009] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.425087] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.425091] Extcon AUX1(HDMI) enable [ 7.428542] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.428548] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.437621] Switching from initrd to actual rootfs [ 7.437769] tegradc 15200000.display: sync windows ret = 247 [ 7.492918] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.494282] Extcon HDMI: HPD enabled [ 7.495557] tegradc 15200000.display: hdmi: plugged [ 7.517241] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.518677] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.520076] usb 1-3: Product: Bluetooth Radio [ 7.521383] usb 1-3: Manufacturer: Realtek [ 7.522677] usb 1-3: SerialNumber: 00e04c000001 [ 7.583532] systemd[1]: System time before build time, advancing clock. [ 7.652251] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.657135] systemd[1]: Detected architecture arm64. [ 7.696303] systemd[1]: Set hostname to . [ 7.854040] systemd-sysv-generator[244]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.203422] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.205173] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.210540] systemd[1]: Created slice system-modprobe.slice. [ 8.215221] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.219479] systemd[1]: Created slice User and Session Slice. [ 8.223058] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.227308] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.230674] systemd[1]: Reached target User and Group Name Lookups. [ 8.233884] systemd[1]: Reached target Slices. [ 8.237007] systemd[1]: Reached target Swap. [ 8.240999] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.244672] systemd[1]: Listening on Syslog Socket. [ 8.248276] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.251658] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.256071] systemd[1]: Listening on Journal Audit Socket. [ 8.259620] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.265003] systemd[1]: Listening on Journal Socket. [ 8.268819] systemd[1]: Listening on udev Control Socket. [ 8.273227] systemd[1]: Listening on udev Kernel Socket. [ 8.281326] systemd[1]: Mounting Huge Pages File System... [ 8.289564] systemd[1]: Mounting POSIX Message Queue File System... [ 8.297869] systemd[1]: Mounting RPC Pipe File System... [ 8.306526] systemd[1]: Mounting Kernel Debug File System... [ 8.315108] systemd[1]: Mounting Kernel Trace File System... [ 8.325043] systemd[1]: Starting Journal Service... [ 8.334003] systemd[1]: Starting Set the console keyboard layout... [ 8.342558] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.346213] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.352851] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.361217] systemd[1]: Started Nameserver information manager. [ 8.366595] systemd[1]: Reached target Network (Pre). [ 8.374287] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.374488] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.381928] systemd[1]: Starting Load Kernel Modules... [ 8.389743] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.398960] systemd[1]: Starting udev Coldplug all Devices... [ 8.409289] systemd[1]: Mounted Huge Pages File System. [ 8.413223] systemd[1]: Mounted POSIX Message Queue File System. [ 8.416843] systemd[1]: Mounted RPC Pipe File System. [ 8.420608] systemd[1]: Mounted Kernel Debug File System. [ 8.421837] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.428200] systemd[1]: Mounted Kernel Trace File System. [ 8.431168] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.432092] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.434205] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.434217] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.434221] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.434430] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.440346] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.442032] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.443551] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.443661] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.457730] systemd[1]: nvfb-udev.service: Succeeded. [ 8.461696] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.474746] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.479737] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.481544] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.497593] systemd[1]: Starting Load/Save Random Seed... [ 8.505712] systemd[1]: Starting Create System Users... [ 8.544558] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.544558] [ 8.566028] systemd[1]: Finished Load/Save Random Seed. [ 8.575324] systemd[1]: Finished Load Kernel Modules. [ 8.581581] systemd[1]: Finished Create System Users. [ 8.586221] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.594629] systemd[1]: Mounting Kernel Configuration File System... [ 8.602406] systemd[1]: Started OP-TEE Client Supplicant. [ 8.611426] systemd[1]: Starting Apply Kernel Variables... [ 8.619502] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.630682] systemd[1]: Finished Set the console keyboard layout. [ 8.637514] systemd[1]: Mounted Kernel Configuration File System. [ 10.092800] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.099254] imx219 9-0010: board setup failed [ 10.099391] imx219: probe of 9-0010 failed with error -121 [ 10.111154] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.117831] imx219 10-0010: board setup failed [ 10.117923] imx219: probe of 10-0010 failed with error -121 [ 10.159813] hot-surface-alert cooling state: 0 -> 1 [ 10.611054] using random self ethernet address [ 10.613207] using random host ethernet address [ 11.798907] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.798914] Creating 1 MTD partitions on "spi6.0": [ 11.798924] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.080912] using random self ethernet address [ 12.084413] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.788482] nvidia: loading out-of-tree module taints kernel. [ 59.005975] watchdog: watchdog0: watchdog did not stop! [ 59.461811] Trying to unregister non-registered hwtime source [ 62.518936] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.520730] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeïÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 66500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.482] I> register 'maxim' power off handle [0003.484] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.606] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.643] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.644] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.688] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.717] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.733] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.743] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000680] Console: colour dummy device 80x25 [ 0.002106] printk: console [tty0] enabled [ 0.002169] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002205] pid_max: default: 32768 minimum: 301 [ 0.002378] LSM: Security Framework initializing [ 0.002443] Yama: becoming mindful. [ 0.002487] SELinux: Initializing. [ 0.002637] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002680] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005500] rcu: Hierarchical SRCU implementation. [ 0.005735] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006427] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006504] DTB Build time: Aug 10 2022 20:31:49 [ 0.009180] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009404] Remapping and enabling EFI services. [ 0.011544] smp: Bringing up secondary CPUs ... [ 0.041242] Detected PIPT I-cache on CPU1 [ 0.041368] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070880] Detected PIPT I-cache on CPU2 [ 0.071034] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100689] Detected PIPT I-cache on CPU3 [ 0.100835] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130560] Detected PIPT I-cache on CPU4 [ 0.130815] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160573] Detected PIPT I-cache on CPU5 [ 0.160762] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161187] smp: Brought up 1 node, 6 CPUs [ 0.161415] SMP: Total of 6 processors activated. [ 0.161493] CPU features: detected: Privileged Access Never [ 0.161523] CPU features: detected: LSE atomic instructions [ 0.161542] CPU features: detected: User Access Override [ 0.161562] CPU features: detected: 32-bit EL0 Support [ 0.161580] CPU features: detected: RAS Extension Support [ 0.161599] CPU features: detected: CRC32 instructions [ 0.161618] CPU features: detected: 32-bit EL1 Support [ 0.232152] CPU: All CPU(s) started at EL2 [ 0.238859] devtmpfs: initialized [ 0.287830] Registered cp15_barrier emulation handler [ 0.287954] Registered setend emulation handler [ 0.287979] KASLR enabled [ 0.288251] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288288] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289592] pinctrl core: initialized pinctrl subsystem [ 0.290610] SMBIOS 3.0.0 present. [ 0.290642] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291291] NET: Registered protocol family 16 [ 0.293250] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293760] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294455] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294538] audit: initializing netlink subsys (disabled) [ 0.294768] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.295198] thermal_sys: Registered thermal governor 'step_wise' [ 0.295204] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295224] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.297339] cpuidle: using governor menu [ 0.297678] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.298089] ASID allocator initialised with 32768 entries [ 0.298342] Serial: AMBA PL011 UART driver [ 0.301645] Tegra reboot handler registered. [ 0.376221] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.376347] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.376565] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.376622] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.376758] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.376810] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376962] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.377037] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.377173] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.377243] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.379354] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.379399] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.379435] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.379469] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.379505] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379550] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379593] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379648] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379701] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379731] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379762] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379792] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379822] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379851] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379881] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379935] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379993] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.380092] mc-err: mcerr ops are set to t19x [ 0.392630] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392675] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.392695] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392713] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399753] ACPI: Interpreter disabled. [ 0.401555] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.403318] iommu: Default domain type: Translated [ 0.403419] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.403968] SCSI subsystem initialized [ 0.404222] usbcore: registered new interface driver usbfs [ 0.404293] usbcore: registered new interface driver hub [ 0.404375] usbcore: registered new device driver usb [ 0.404998] mc: Linux media interface: v0.10 [ 0.405055] videodev: Linux video capture interface: v2.00 [ 0.405535] pps_core: LinuxPPS API ver. 1 registered [ 0.405559] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.405602] PTP clock support registered [ 0.405946] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.406412] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.406514] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.407449] Registered efivars operations [ 0.416177] FPGA manager framework [ 0.416334] Advanced Linux Sound Architecture Driver Initialized. [ 0.417106] Bluetooth: Core ver 2.22 [ 0.417158] NET: Registered protocol family 31 [ 0.417175] Bluetooth: HCI device and connection manager initialized [ 0.417196] Bluetooth: HCI socket layer initialized [ 0.417215] Bluetooth: L2CAP socket layer initialized [ 0.417244] Bluetooth: SCO socket layer initialized [ 0.419483] camchar: rtcpu character device driver loaded [ 0.420426] clocksource: Switched to clocksource arch_sys_counter [ 0.850533] VFS: Disk quotas dquot_6.6.0 [ 0.850627] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.850998] pnp: PnP ACPI: disabled [ 0.864691] la/ptsa driver initialized. [ 0.864849] NET: Registered protocol family 2 [ 0.865102] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.872824] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.873027] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.873406] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.874042] TCP: Hash tables configured (established 65536 bind 65536) [ 0.874196] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.874333] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.874604] NET: Registered protocol family 1 [ 0.875649] RPC: Registered named UNIX socket transport module. [ 0.875683] RPC: Registered udp transport module. [ 0.875698] RPC: Registered tcp transport module. [ 0.875712] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.875779] PCI: CLS 0 bytes, default 64 [ 0.876043] Trying to unpack rootfs image as initramfs... [ 1.136372] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.139891] Freeing initrd memory: 8196K [ 1.144245] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.144277] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.144334] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.144787] kvm [1]: IPA Size Limit: 40 bits [ 1.145279] kvm [1]: vgic interrupt IRQ9 [ 1.145730] kvm [1]: VHE mode initialized successfully [ 1.147274] Initialise system trusted keyrings [ 1.147570] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.153958] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.154843] NFS: Registering the id_resolver key type [ 1.154885] Key type id_resolver registered [ 1.154902] Key type id_legacy registered [ 1.155015] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.155040] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.155108] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.165164] NET: Registered protocol family 38 [ 1.165188] Key type asymmetric registered [ 1.165204] Asymmetric key parser 'x509' registered [ 1.165257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.165507] io scheduler mq-deadline registered [ 1.165527] io scheduler kyber registered [ 1.171525] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.174568] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.174643] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.174711] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.174777] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.174842] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.180651] scrncapt: init (heads:4 wins:6 planes:4) [ 1.180969] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.181870] EINJ: ACPI disabled. [ 1.185133] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.185158] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.185173] tegra-pmc: ### PMC reset level: L1 [ 1.185188] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.185261] tegra-pmc: PMC Prod config success [ 1.190222] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.195756] random: fast init done [ 1.196133] printk: console [ttyTCU0] enabled [ 2.747897] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.752089] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.756598] arm-smmu 10000000.iommu: stage 1 translation [ 2.762107] arm-smmu 10000000.iommu: stage 2 translation [ 2.767876] arm-smmu 10000000.iommu: nested translation [ 2.772960] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.780165] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.790049] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.793517] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.799819] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.807906] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.812875] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.817665] arm-smmu 12000000.iommu: stage 1 translation [ 2.823367] arm-smmu 12000000.iommu: stage 2 translation [ 2.828809] arm-smmu 12000000.iommu: nested translation [ 2.833964] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.841140] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.850949] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.854521] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.861072] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.868606] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.878165] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.881471] tegra_profiler: auth: init [ 2.885484] THERMAL EST: found 3 subdevs [ 2.889166] THERMAL EST num_resources: 0 [ 2.892772] [THERMAL EST subdev 0] [ 2.896052] [THERMAL EST subdev 1] [ 2.899745] [THERMAL EST subdev 2] [ 2.902807] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.909258] THERMAL EST: thz register success. [ 2.913432] THERMAL EST: end of probe, return err: 0 [ 2.919091] nvsciipc: loaded module [ 2.926363] tun: Universal TUN/TAP device driver, 1.6 [ 2.928798] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.934492] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.940354] e1000e: Intel(R) PRO/1000 Network Driver [ 2.945239] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.951078] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.956623] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.963047] PPP generic driver version 2.4.2 [ 2.966814] PPP BSD Compression module registered [ 2.971336] PPP Deflate Compression module registered [ 2.976584] PPP MPPE Compression module registered [ 2.981601] usbcore: registered new interface driver r8152 [ 2.987115] usbcore: registered new interface driver asix [ 2.992693] usbcore: registered new interface driver ax88179_178a [ 2.998821] usbcore: registered new interface driver cdc_ether [ 3.004514] usbcore: registered new interface driver net1080 [ 3.010109] usbcore: registered new interface driver cdc_subset [ 3.016405] usbcore: registered new interface driver zaurus [ 3.022104] usbcore: registered new interface driver cdc_ncm [ 3.027524] usbcore: registered new interface driver aqc111 [ 3.033167] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.039494] ohci-pci: OHCI PCI platform driver [ 3.043534] ohci-platform: OHCI generic platform driver [ 3.049789] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.055977] usbcore: registered new interface driver uas [ 3.060094] usbcore: registered new interface driver usb-storage [ 3.066260] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.071964] mousedev: PS/2 mouse device common for all mice [ 3.076986] usbcore: registered new interface driver xpad [ 3.085241] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.087960] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.095523] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.102114] i2c /dev entries driver [ 3.105426] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.111580] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.116549] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.122136] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.127490] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.133038] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.138143] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.152181] device-mapper: uevent: version 1.0.3 [ 3.152630] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.159065] cpuidle: Initializing cpuidle driver [ 3.162531] sdhci: Secure Digital Host Controller Interface driver [ 3.167591] sdhci: Copyright(c) Pierre Ossman [ 3.171438] Synopsys Designware Multimedia Card Interface Driver [ 3.177897] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.183951] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.184843] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.196892] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.218730] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.228763] vdd-1v0: supplied by regulator-dummy [ 3.234307] vdd-1v8-hs: supplied by regulator-dummy [ 3.239153] vdd-1v8-ls: supplied by regulator-dummy [ 3.243952] vdd-1v8-ao: supplied by regulator-dummy [ 3.248003] vddio-ddr-1v1: supplied by regulator-dummy [ 3.252516] vdd-rtc: supplied by regulator-dummy [ 3.254341] spmic-ldo1: supplied by regulator-dummy [ 3.255592] vdd-ao-3v3: supplied by regulator-dummy [ 3.261764] vddio-emmc-3v3: supplied by regulator-dummy [ 3.268158] spmic-ldo4: supplied by regulator-dummy [ 3.269487] vdd-usb-3v3: supplied by regulator-dummy [ 3.275651] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.281882] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.287442] spmic-ldo8: supplied by vdd-1v8-ls [ 3.288899] gpio-510 (gpio_default): hogged as output/high [ 3.290277] gpio-511 (gpio_default): hogged as output/high [ 3.293255] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.429959] max77686-rtc max77620-rtc: registered as rtc0 [ 3.431073] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.431434] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.257081] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.258279] hid: raw HID events driver (C) Jiri Kosina [ 4.259092] usbcore: registered new interface driver usbhid [ 4.259254] usbhid: USB HID core driver [ 4.261428] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.262860] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.303756] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.377957] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.009 ms) ÿá[ 4.346965] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.347479] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.348333] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.349092] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.350652] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.351214] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.351913] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.353096] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.353327] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.355650] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.363251] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.369945] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.373998] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.381326] denver_knobs_init:MTS_VERSION:55637613 [ 4.394040] t19x_cache tegra-cache: probed [ 4.398363] optee: probing for conduit method. [ 4.399270] optee: revision 3.16 (65cc2218) [ 4.400251] optee: dynamic shared memory is enabled [ 4.402010] optee: initialized driver [ 4.408062] nvpmodel: initialized successfully [ 4.409920] tegra_hv: get_hvd: not initialized yet [ 4.414107] user_ivc_mempool: hypervisor not present [ 4.420331] usbcore: registered new interface driver snd-usb-audio [ 4.426850] u32 classifier [ 4.428118] input device check on [ 4.431829] Actions configured [ 4.435195] Initializing XFRM netlink socket [ 4.440111] NET: Registered protocol family 10 [ 4.446627] Segment Routing with IPv6 [ 4.447757] NET: Registered protocol family 17 [ 4.451802] NET: Registered protocol family 15 [ 4.456577] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.469648] Bluetooth: RFCOMM socket layer initialized [ 4.474393] Bluetooth: RFCOMM ver 1.11 [ 4.478607] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.484195] Bluetooth: HIDP socket layer initialized [ 4.490192] 9pnet: Installing 9P2000 support [ 4.493876] Key type dns_resolver registered [ 4.498848] registered taskstats version 1 [ 4.502037] Loading compiled-in X.509 certificates [ 4.514675] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.517814] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.527894] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.530236] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.538526] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.547165] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.664482] tegra194-pcie 14160000.pcie: Link up [ 4.667490] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.667759] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.667958] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.668246] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.668479] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.668889] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.669353] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.683960] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.684400] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.684944] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.686632] pci 0004:01:00.0: supports D1 D2 [ 4.686828] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.698381] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.698748] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.699063] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.699498] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.699765] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.699994] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.700248] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.706594] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.715254] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.725522] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.729839] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.735684] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.742283] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.751414] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.753185] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.761407] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.770118] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.885187] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.885725] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.885973] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.886170] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.886485] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.886698] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.887112] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.887546] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.907011] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.907401] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.909648] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.911332] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.912768] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.914301] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.915270] pci 0005:00:00.0: Removing from iommu group 7 [ 5.915571] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.950109] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.975371] host1x 13e10000.host1x: initialized [ 5.977146] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.978065] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.979381] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.980045] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.981514] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.982189] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.983272] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.983936] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.984959] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.985643] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.995282] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.002067] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.011904] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.019448] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.029251] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.036334] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.046479] falcon 15340000.vic: Adding to iommu group 17 [ 6.061216] falcon 15340000.vic: initialized [ 6.062184] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.067675] falcon 15380000.nvjpg: initialized [ 6.068281] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.078402] falcon 154c0000.nvenc: initialized [ 6.078977] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.088860] falcon 15a80000.nvenc1: initialized [ 6.089362] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.102684] nvdec 15480000.nvdec: initialized [ 6.103146] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.113158] nvdec 15140000.nvdec1: initialized [ 6.113760] tsec 15500000.tsec: Adding to iommu group 18 [ 6.119476] tsec 15500000.tsec: initialized [ 6.119998] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.126601] tsec 15100000.tsecb: initialized [ 6.130251] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.158535] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.171448] gpio-374 (wifi-enable): hogged as output/high [ 6.171795] gpio-431 (camera-control-output-low): hogged as output/low [ 6.172077] gpio-432 (camera-control-output-low): hogged as output/low [ 6.173803] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.176176] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.176893] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.178293] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.182755] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.188364] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.194146] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.202778] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.209831] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.221812] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.226256] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.232218] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.241063] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.250426] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.257961] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.265132] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.271638] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.281296] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.287284] pva 16000000.pva0: Adding to iommu group 22 [ 6.316008] pva 16000000.pva0: initialized [ 6.320820] pva 16800000.pva1: Adding to iommu group 23 [ 6.339887] pva 16800000.pva1: initialized [ 6.344611] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.358902] nvdla 15880000.nvdla0: initialized [ 6.360183] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.369440] nvdla 158c0000.nvdla1: initialized [ 6.373516] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.373586] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.373852] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.374045] tegradc 15200000.display: Adding to iommu group 26 [ 6.374287] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.374314] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.374748] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.375044] tegradccommon 15200000.display-hub: dma mapping done [ 6.377184] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.382416] tegra_cec 3960000.tegra_cec: probed [ 6.383241] tegradc 15210000.display: Adding to iommu group 26 [ 6.383588] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.383703] generic_infoframe_type: 0x87 [ 6.383801] tegradc 15200000.display: DT parsed successfully [ 6.383886] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.388315] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.394246] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.402612] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.403660] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.410051] kfuse 3830000.kfuse: initialized [ 6.413055] random: crng init done [ 6.417378] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.423713] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.432559] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.438107] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.446501] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.448160] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.451352] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.457696] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.462761] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.469651] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.475949] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.483121] tegradc 15210000.display: disp0 connected to head1->sor [ 6.487785] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.498431] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.505112] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.511010] tegradc 15210000.display: DT parsed successfully [ 6.520358] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.526674] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.544566] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.592907] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.598171] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.606652] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.615498] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.622217] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.629476] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.636761] usb usb1: Product: xHCI Host Controller [ 6.641692] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.648066] usb usb1: SerialNumber: 3610000.xhci [ 6.653683] hub 1-0:1.0: USB hub found [ 6.656795] hub 1-0:1.0: 4 ports detected [ 6.661557] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.665874] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.673737] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.681168] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.689331] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.696298] usb usb2: Product: xHCI Host Controller [ 6.701273] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.707484] usb usb2: SerialNumber: 3610000.xhci [ 6.713072] hub 2-0:1.0: USB hub found [ 6.715941] hub 2-0:1.0: 4 ports detected [ 6.759350] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.766528] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.768020] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.768242] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.781932] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.783030] tegra194-cpufreq ccplex: probed with BWMGR [ 6.784344] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.784881] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.785350] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.786710] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.794072] tegra194-vi5 15c10000.vi: initialized [ 6.795833] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.796437] generic_infoframe_type: 0x87 [ 6.796468] mmc0: CQHCI version 5.10 [ 6.796908] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.797112] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.797119] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.797126] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.797131] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.797135] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.800132] tegradc 15200000.display: DT parsed successfully [ 6.804545] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.810032] tegradc 15200000.display: Display dc.000000007076a985 registered with id=0 [ 6.818340] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.818346] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.879140] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.879587] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.892509] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.893852] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.893863] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.910394] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.917996] nvethernet 2490000.ethernet: Macsec not supported [ 6.919358] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.920460] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.924119] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.924371] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.930827] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.967306] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.968088] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.974385] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.978950] mmc0: Command Queue Engine enabled [ 6.978955] mmc0: periodic cache flush enabled [ 6.978971] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.979520] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.979688] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.981889] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.983641] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.989794] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.995072] tegradc 15200000.display: probed [ 6.999745] tegra-se-nvhost 15810000.se: initialized [ 7.052661] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.053870] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.060166] Console: switching to colour frame buffer device 240x67 [ 7.060622] tegra-se-nvhost 15820000.se: initialized [ 7.066147] tegradc 15200000.display: fb registered [ 7.066233] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.072673] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.076651] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.081794] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.088041] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.094424] tegra-se-nvhost 15830000.se: initialized [ 7.096242] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.096247] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.096251] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.096255] usb 1-2: Manufacturer: Generic [ 7.098294] hub 1-2:1.0: USB hub found [ 7.099321] hub 1-2:1.0: 4 ports detected [ 7.144626] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.149942] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.155928] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.156145] tegra-se-nvhost 15840000.se: initialized [ 7.165346] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.171147] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.177176] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.177807] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.184949] tegra_actmon d230000.actmon: in actmon_register()... [ 7.191170] Extcon AUX1(HDMI) enable [ 7.191291] tegradc 15210000.display: disp1 connected to head1->sor [ 7.198191] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.204070] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.208111] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.213656] tegradc 15210000.display: DT parsed successfully [ 7.219548] hvc_sysfs: hypervisor is not present [ 7.226427] tegradc 15210000.display: Display dc.00000000ed59743c registered with id=1 [ 7.252852] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.262154] ALSA device list: [ 7.262437] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.263171] No soundcards found. [ 7.273131] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.286289] tegradc 15210000.display: probed [ 7.286643] tegradc 15210000.display: fb registered [ 7.291845] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.294044] Freeing unused kernel memory: 3968K [ 7.295847] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.295853] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.295857] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.295861] usb 2-3: Manufacturer: Generic [ 7.296089] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.306544] hub 2-3:1.0: USB hub found [ 7.309040] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.318150] hub 2-3:1.0: 4 ports detected [ 7.332736] Run /init as init process [ 7.349682] tegradc 15210000.display: blank - powerdown ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.354563] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.354568] Extcon DP: HPD disabled [ 7.354571] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.354583] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.354588] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.354665] tegradc 15200000.display: blank - powerdown [ 7.389658] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.389663] Extcon AUX1(HDMI) disable [ 7.392460] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.392465] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.412482] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.413018] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.413883] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.426841] tegradc 15200000.display: unblank [ 7.428063] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.428259] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.434263] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.436127] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.440115] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.440120] Extcon AUX1(HDMI) enable [ 7.452900] tegradc 15200000.display: sync windows ret = 246 [ 7.490930] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.498033] Extcon HDMI: HPD enabled [ 7.501958] tegradc 15200000.display: hdmi: plugged [ 7.543439] Root device found: mmcblk0p1 [ 7.546771] Found dev node: /dev/mmcblk0p1 [ 7.565757] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.567216] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.568605] usb 1-3: Product: Bluetooth Radio [ 7.569871] usb 1-3: Manufacturer: Realtek [ 7.571120] usb 1-3: SerialNumber: 00e04c000001 [ 7.583105] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.588840] Rootfs mounted over mmcblk0p1 [ 7.626125] Switching from initrd to actual rootfs [ 7.767997] systemd[1]: System time before build time, advancing clock. [ 7.838233] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.843168] systemd[1]: Detected architecture arm64. [ 7.883633] systemd[1]: Set hostname to . [ 8.044027] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.395466] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.397231] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.402893] systemd[1]: Created slice system-modprobe.slice. [ 8.407658] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.411745] systemd[1]: Created slice User and Session Slice. [ 8.415227] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.419459] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.422784] systemd[1]: Reached target User and Group Name Lookups. [ 8.425899] systemd[1]: Reached target Slices. [ 8.428941] systemd[1]: Reached target Swap. [ 8.434222] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.439987] systemd[1]: Listening on Syslog Socket. [ 8.446011] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.451779] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.458438] systemd[1]: Listening on Journal Audit Socket. [ 8.463637] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.467331] systemd[1]: Listening on Journal Socket. [ 8.470940] systemd[1]: Listening on udev Control Socket. [ 8.474317] systemd[1]: Listening on udev Kernel Socket. [ 8.482661] systemd[1]: Mounting Huge Pages File System... [ 8.490807] systemd[1]: Mounting POSIX Message Queue File System... [ 8.498704] systemd[1]: Mounting RPC Pipe File System... [ 8.507164] systemd[1]: Mounting Kernel Debug File System... [ 8.515441] systemd[1]: Mounting Kernel Trace File System... [ 8.524959] systemd[1]: Starting Journal Service... [ 8.534116] systemd[1]: Starting Set the console keyboard layout... [ 8.542236] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.545715] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.551920] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.559753] systemd[1]: Started Nameserver information manager. [ 8.565725] systemd[1]: Reached target Network (Pre). [ 8.571899] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.573896] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.581361] systemd[1]: Starting Load Kernel Modules... [ 8.589570] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.597416] systemd[1]: Starting udev Coldplug all Devices... [ 8.609140] systemd[1]: Mounted Huge Pages File System. [ 8.612874] systemd[1]: Mounted POSIX Message Queue File System. [ 8.616473] systemd[1]: Mounted RPC Pipe File System. [ 8.619085] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.623160] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.624031] systemd[1]: Mounted Kernel Debug File System. [ 8.625050] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.627479] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.627492] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.627495] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.627756] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.629393] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.634588] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.634598] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.641148] systemd[1]: Mounted Kernel Trace File System. [ 8.647003] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.651767] systemd[1]: nvfb-udev.service: Succeeded. [ 8.655828] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.665793] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.677831] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.679573] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.688257] systemd[1]: Starting Load/Save Random Seed... [ 8.696602] systemd[1]: Starting Create System Users... [ 8.724840] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.724840] [ 8.741418] systemd[1]: Finished Load/Save Random Seed. [ 8.755423] systemd[1]: Finished Create System Users. [ 8.762030] systemd[1]: Finished Load Kernel Modules. [ 8.766796] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.773298] systemd[1]: Mounting Kernel Configuration File System... [ 8.782006] systemd[1]: Started OP-TEE Client Supplicant. [ 8.791513] systemd[1]: Starting Apply Kernel Variables... [ 8.799318] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.807790] systemd[1]: Mounted Kernel Configuration File System. [ 10.153810] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.160783] imx219 9-0010: board setup failed [ 10.184167] imx219: probe of 9-0010 failed with error -121 [ 10.204560] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.210961] imx219 10-0010: board setup failed [ 10.212183] imx219: probe of 10-0010 failed with error -121 [ 10.314021] hot-surface-alert cooling state: 0 -> 1 [ 10.534261] using random self ethernet address [ 10.534267] using random host ethernet address [ 11.786234] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.787511] Creating 1 MTD partitions on "spi6.0": [ 11.788696] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.306648] using random self ethernet address [ 12.306654] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.842517] nvidia: loading out-of-tree module taints kernel. [ 59.274704] watchdog: watchdog0: watchdog did not stop! [ 59.770014] Trying to unregister non-registered hwtime source [ 62.835244] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.836801] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] tiÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aÿâclk_dt_late initialized ÿäuÿânoc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized cvc initialized ÿä 03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 202ÿâavfs_clk_platform_post initialized ÿä2 aÿâcvc_late initialized regulator_post initialized ÿäarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.605] W> set volts not configured for 'vdd-1v8-hs' [0003.606] I> retrieved tmds range from prod_list_hdmi_soc [0003.611] E> invalid display type [0003.612] E> cannot find any other nvdisp nodes [0003.628] I> edid read success [0003.640] I> edid read success [0003.641] I> width = 640, height = 480, frequency = 25174825 [0003.641] I> width = 1920, height = 1080, frequency = 148500000 [0003.642] I> width = 1280, height = 768, frequency = 79500000 [0003.642] I> width = 1360, height = 768, frequency = 85500000 [0003.642] I> width = 720, height = 480, frequency = 26973026 [0003.646] I> width = 720, height = 576, frequency = 26973026 [0003.652] I> width = 1280, height = 720, frequency = 74175824 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1920, height = 1080, frequency = 148351648 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 720, height = 480, frequency = 26973026 [0003.680] I> width = 720, height = 576, frequency = 26973026 [0003.686] I> width = 3840, height = 2160, frequency = 296703296 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 4096, height = 2160, frequency = 296703296 [0003.714] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.726] I> hdmi_enable, starting HDMI initialisation [0003.731] I> hdmi_enable, HDMI initialisation complete [0003.740] initializing target [0003.741] calling apps_init() [0003.741] starting app kernel_boot_app [0003.742] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000090974000-0x00000000a0974000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000738] Console: colour dummy device 80x25 [ 0.002306] printk: console [tty0] enabled [ 0.002375] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002412] pid_max: default: 32768 minimum: 301 [ 0.002595] LSM: Security Framework initializing [ 0.002690] Yama: becoming mindful. [ 0.002762] SELinux: Initializing. [ 0.002912] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002950] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006079] rcu: Hierarchical SRCU implementation. [ 0.006399] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007128] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007200] DTB Build time: Aug 10 2022 20:31:49 [ 0.010078] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010379] Remapping and enabling EFI services. [ 0.012480] smp: Bringing up secondary CPUs ... [ 0.044903] Detected PIPT I-cache on CPU1 [ 0.044981] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074942] Detected PIPT I-cache on CPU2 [ 0.075020] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104647] Detected PIPT I-cache on CPU3 [ 0.104717] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134343] Detected PIPT I-cache on CPU4 [ 0.134445] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164070] Detected PIPT I-cache on CPU5 [ 0.164138] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164516] smp: Brought up 1 node, 6 CPUs [ 0.164880] SMP: Total of 6 processors activated. [ 0.164933] CPU features: detected: Privileged Access Never [ 0.164993] CPU features: detected: LSE atomic instructions [ 0.165018] CPU features: detected: User Access Override [ 0.165041] CPU features: detected: 32-bit EL0 Support [ 0.165064] CPU features: detected: RAS Extension Support [ 0.165087] CPU features: detected: CRC32 instructions [ 0.165109] CPU features: detected: 32-bit EL1 Support [ 0.233227] CPU: All CPU(s) started at EL2 [ 0.239451] devtmpfs: initialized [ 0.291175] Registered cp15_barrier emulation handler [ 0.291323] Registered setend emulation handler [ 0.291358] KASLR enabled [ 0.291631] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291681] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.294374] pinctrl core: initialized pinctrl subsystem [ 0.295547] SMBIOS 3.0.0 present. [ 0.295596] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.296318] NET: Registered protocol family 16 [ 0.298354] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.298859] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.299586] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.299665] audit: initializing netlink subsys (disabled) [ 0.299962] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.300369] thermal_sys: Registered thermal governor 'step_wise' [ 0.300377] thermal_sys: Registered thermal governor 'power_allocator' [ 0.300404] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.302482] cpuidle: using governor menu [ 0.302778] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.303237] ASID allocator initialised with 32768 entries [ 0.303535] Serial: AMBA PL011 UART driver [ 0.306803] Tegra reboot handler registered. [ 0.375006] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375184] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.375427] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.375485] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.375616] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.375674] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.375802] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.375857] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376001] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376056] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.378441] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.378490] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.378560] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.378604] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.378669] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.378712] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.378784] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.378833] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.378873] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.378912] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.378951] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.378990] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379029] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379068] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379107] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379146] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379185] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.379319] mc-err: mcerr ops are set to t19x [ 0.391105] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391152] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.391177] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391201] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.398064] ACPI: Interpreter disabled. [ 0.399349] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400832] iommu: Default domain type: Translated [ 0.400924] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.401299] SCSI subsystem initialized [ 0.401468] usbcore: registered new interface driver usbfs [ 0.401516] usbcore: registered new interface driver hub [ 0.401557] usbcore: registered new device driver usb [ 0.402059] mc: Linux media interface: v0.10 [ 0.402097] videodev: Linux video capture interface: v2.00 [ 0.402520] pps_core: LinuxPPS API ver. 1 registered [ 0.402542] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.402582] PTP clock support registered [ 0.402826] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.403128] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.403246] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.404044] Registered efivars operations [ 0.409255] FPGA manager framework [ 0.409378] Advanced Linux Sound Architecture Driver Initialized. [ 0.410031] Bluetooth: Core ver 2.22 [ 0.410073] NET: Registered protocol family 31 [ 0.410089] Bluetooth: HCI device and connection manager initialized [ 0.410109] Bluetooth: HCI socket layer initialized [ 0.410127] Bluetooth: L2CAP socket layer initialized [ 0.410172] Bluetooth: SCO socket layer initialized [ 0.411906] camchar: rtcpu character device driver loaded [ 0.412662] clocksource: Switched to clocksource arch_sys_counter [ 0.802242] VFS: Disk quotas dquot_6.6.0 [ 0.802340] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.802730] pnp: PnP ACPI: disabled [ 0.816354] la/ptsa driver initialized. [ 0.816522] NET: Registered protocol family 2 [ 0.816794] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.824880] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.824972] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.825325] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.825977] TCP: Hash tables configured (established 65536 bind 65536) [ 0.826169] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.826325] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.826604] NET: Registered protocol family 1 [ 0.827484] RPC: Registered named UNIX socket transport module. [ 0.827545] RPC: Registered udp transport module. [ 0.827560] RPC: Registered tcp transport module. [ 0.827574] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.827598] PCI: CLS 0 bytes, default 64 [ 0.827866] Trying to unpack rootfs image as initramfs... [ 1.096881] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.099846] Freeing initrd memory: 8196K [ 1.104717] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.104747] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.104782] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.105117] kvm [1]: IPA Size Limit: 40 bits [ 1.105615] kvm [1]: vgic interrupt IRQ9 [ 1.106164] kvm [1]: VHE mode initialized successfully [ 1.107749] Initialise system trusted keyrings [ 1.108032] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.114769] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.115720] NFS: Registering the id_resolver key type [ 1.115756] Key type id_resolver registered [ 1.115770] Key type id_legacy registered [ 1.115867] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.115891] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.115930] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.125962] NET: Registered protocol family 38 [ 1.125984] Key type asymmetric registered [ 1.125998] Asymmetric key parser 'x509' registered [ 1.126048] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.126302] io scheduler mq-deadline registered [ 1.126323] io scheduler kyber registered [ 1.132304] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.135521] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.135615] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.135688] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.135759] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.135834] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.141484] scrncapt: init (heads:4 wins:6 planes:4) [ 1.141649] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.142578] EINJ: ACPI disabled. [ 1.146251] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.146303] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.146317] tegra-pmc: ### PMC reset level: L1 [ 1.146331] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.146380] tegra-pmc: PMC Prod config success [ 1.152092] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.157439] random: fast init done [ 1.158061] printk: console [ttyTCU0] enabled [ 2.710118] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.714218] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.718816] arm-smmu 10000000.iommu: stage 1 translation [ 2.724345] arm-smmu 10000000.iommu: stage 2 translation [ 2.730110] arm-smmu 10000000.iommu: nested translation [ 2.735115] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.742288] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.752934] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.755386] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.762229] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.770036] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.775265] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.779731] arm-smmu 12000000.iommu: stage 1 translation [ 2.785262] arm-smmu 12000000.iommu: stage 2 translation [ 2.790926] arm-smmu 12000000.iommu: nested translation [ 2.796095] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.803278] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.813637] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.816632] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.823213] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.830395] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.840344] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.843665] tegra_profiler: auth: init [ 2.847623] THERMAL EST: found 3 subdevs [ 2.851311] THERMAL EST num_resources: 0 [ 2.854927] [THERMAL EST subdev 0] [ 2.858475] [THERMAL EST subdev 1] [ 2.861633] [THERMAL EST subdev 2] [ 2.865143] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.871348] THERMAL EST: thz register success. [ 2.875579] THERMAL EST: end of probe, return err: 0 [ 2.881201] nvsciipc: loaded module [ 2.888058] tun: Universal TUN/TAP device driver, 1.6 [ 2.890551] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.896664] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.902508] e1000e: Intel(R) PRO/1000 Network Driver [ 2.907139] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.913463] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.918762] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.924990] PPP generic driver version 2.4.2 [ 2.928911] PPP BSD Compression module registered [ 2.933476] PPP Deflate Compression module registered [ 2.938727] PPP MPPE Compression module registered [ 2.944009] usbcore: registered new interface driver r8152 [ 2.949251] usbcore: registered new interface driver asix [ 2.954841] usbcore: registered new interface driver ax88179_178a [ 2.960968] usbcore: registered new interface driver cdc_ether [ 2.966666] usbcore: registered new interface driver net1080 [ 2.972261] usbcore: registered new interface driver cdc_subset [ 2.978552] usbcore: registered new interface driver zaurus [ 2.984251] usbcore: registered new interface driver cdc_ncm [ 2.989669] usbcore: registered new interface driver aqc111 [ 2.995322] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.001652] ohci-pci: OHCI PCI platform driver [ 3.005687] ohci-platform: OHCI generic platform driver [ 3.011568] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.018121] usbcore: registered new interface driver uas [ 3.022257] usbcore: registered new interface driver usb-storage [ 3.028448] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.034006] mousedev: PS/2 mouse device common for all mice [ 3.039142] usbcore: registered new interface driver xpad [ 3.047186] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.049890] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.057926] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.064216] i2c /dev entries driver [ 3.067882] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.073641] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.078776] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.084269] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.089521] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.095201] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.100597] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.113043] device-mapper: uevent: version 1.0.3 [ 3.113443] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.120249] cpuidle: Initializing cpuidle driver [ 3.124483] sdhci: Secure Digital Host Controller Interface driver [ 3.129757] sdhci: Copyright(c) Pierre Ossman [ 3.133583] Synopsys Designware Multimedia Card Interface Driver [ 3.140016] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.145825] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.146445] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.158849] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.176451] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.185157] vdd-1v0: supplied by regulator-dummy [ 3.190479] vdd-1v8-hs: supplied by regulator-dummy [ 3.195089] vdd-1v8-ls: supplied by regulator-dummy [ 3.199742] vdd-1v8-ao: supplied by regulator-dummy [ 3.203459] vddio-ddr-1v1: supplied by regulator-dummy [ 3.207730] vdd-rtc: supplied by regulator-dummy [ 3.209295] spmic-ldo1: supplied by regulator-dummy [ 3.210456] vdd-ao-3v3: supplied by regulator-dummy [ 3.216520] vddio-emmc-3v3: supplied by regulator-dummy [ 3.222775] spmic-ldo4: supplied by regulator-dummy [ 3.223856] vdd-usb-3v3: supplied by regulator-dummy [ 3.230788] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.236813] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.242174] spmic-ldo8: supplied by vdd-1v8-ls [ 3.243533] gpio-510 (gpio_default): hogged as output/high [ 3.245703] gpio-511 (gpio_default): hogged as output/high [ 3.252836] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.391498] max77686-rtc max77620-rtc: registered as rtc0 [ 3.392735] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.393042] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.085125] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.086169] hid: raw HID events driver (C) Jiri Kosina [ 4.086946] usbcore: registered new interface driver usbhid [ 4.087078] usbhid: USB HID core driver [ 4.088878] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.090000] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.117295] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.192746] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 76.259 ms) ÿá[ 4.174869] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.175477] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.176471] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.177314] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.178910] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.179535] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.180133] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.181496] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.181799] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.183652] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.191080] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.197811] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.202468] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.209199] denver_knobs_init:MTS_VERSION:55637613 [ 4.221923] t19x_cache tegra-cache: probed [ 4.224799] optee: probing for conduit method. [ 4.225707] optee: revision 3.16 (65cc2218) [ 4.226790] optee: dynamic shared memory is enabled [ 4.230227] optee: initialized driver [ 4.236363] nvpmodel: initialized successfully [ 4.237566] tegra_hv: get_hvd: not initialized yet [ 4.242225] user_ivc_mempool: hypervisor not present [ 4.248583] usbcore: registered new interface driver snd-usb-audio [ 4.254904] u32 classifier [ 4.256237] input device check on [ 4.260020] Actions configured [ 4.263412] Initializing XFRM netlink socket [ 4.268118] NET: Registered protocol family 10 [ 4.275250] Segment Routing with IPv6 [ 4.275622] NET: Registered protocol family 17 [ 4.280251] NET: Registered protocol family 15 [ 4.284611] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.297968] Bluetooth: RFCOMM socket layer initialized [ 4.302821] Bluetooth: RFCOMM ver 1.11 [ 4.306425] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.312630] Bluetooth: HIDP socket layer initialized [ 4.318242] 9pnet: Installing 9P2000 support [ 4.321988] Key type dns_resolver registered [ 4.327457] registered taskstats version 1 [ 4.330190] Loading compiled-in X.509 certificates [ 4.344240] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.346098] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.356242] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.358198] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.366951] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.375057] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.492828] tegra194-pcie 14160000.pcie: Link up [ 4.495843] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.496037] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.496341] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.496700] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.496865] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.497438] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.498009] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.513015] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.513562] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.514066] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.515514] pci 0004:01:00.0: supports D1 D2 [ 4.515735] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.528326] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.528645] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.529150] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.529705] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.530048] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.530358] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.530597] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.535095] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.543285] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.554312] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.558653] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.564312] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.571325] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.581011] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.581465] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.589823] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.598445] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.713635] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.714229] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.714440] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.714689] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.714986] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.715160] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.715496] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.715911] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.738179] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.738537] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.740306] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.741719] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.743037] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.744812] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.745869] pci 0005:00:00.0: Removing from iommu group 7 [ 5.746104] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.787828] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.814150] host1x 13e10000.host1x: initialized [ 5.816161] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.817170] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.818398] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.819144] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.820251] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.820942] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.822177] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.822743] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.823871] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.824446] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.825504] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.830712] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.840473] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.847647] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.857356] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.864469] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.874634] falcon 15340000.vic: Adding to iommu group 17 [ 5.889352] falcon 15340000.vic: initialized [ 5.890537] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.896309] falcon 15380000.nvjpg: initialized [ 5.897108] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.907110] falcon 154c0000.nvenc: initialized [ 5.907721] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.918525] falcon 15a80000.nvenc1: initialized [ 5.919189] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.930582] nvdec 15480000.nvdec: initialized [ 5.931090] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.940900] nvdec 15140000.nvdec1: initialized [ 5.941423] tsec 15500000.tsec: Adding to iommu group 18 [ 5.946977] tsec 15500000.tsec: initialized [ 5.947473] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.954885] tsec 15100000.tsecb: initialized [ 5.959014] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.987273] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.999043] gpio-374 (wifi-enable): hogged as output/high [ 5.999358] gpio-431 (camera-control-output-low): hogged as output/low [ 5.999653] gpio-432 (camera-control-output-low): hogged as output/low [ 6.001356] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.002890] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.003357] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.005686] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.011317] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.017217] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.022775] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.031187] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.038287] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.050000] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.055312] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.060747] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.069549] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.079037] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.086345] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.093704] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.099885] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.109591] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.116027] pva 16000000.pva0: Adding to iommu group 22 [ 6.143513] pva 16000000.pva0: initialized [ 6.148489] pva 16800000.pva1: Adding to iommu group 23 [ 6.159531] pva 16800000.pva1: initialized [ 6.164076] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.178012] nvdla 15880000.nvdla0: initialized [ 6.179295] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.187625] nvdla 158c0000.nvdla1: initialized [ 6.189938] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.190179] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.190466] tegradccommon 15200000.display-hub: dma mapping done [ 6.192408] tegradc 15200000.display: Adding to iommu group 26 [ 6.201956] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.202257] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.202621] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.202712] generic_infoframe_type: 0x87 [ 6.203994] tegradc 15200000.display: DT parsed successfully [ 6.204123] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.204351] tegradc 15210000.display: Adding to iommu group 26 [ 6.210027] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.216264] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.225522] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.229782] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.235122] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.235145] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.243610] tegra_cec 3960000.tegra_cec: probed [ 6.249966] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.258116] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.265712] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.273074] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.277846] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.282292] kfuse 3830000.kfuse: initialized [ 6.291453] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.295518] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.306432] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.310111] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.310798] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.319734] tegradc 15210000.display: disp0 connected to head1->sor [ 6.324624] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.330783] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.338691] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.343208] tegradc 15210000.display: DT parsed successfully [ 6.349867] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.358042] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.366480] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.400218] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.420785] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.421186] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.423354] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.431991] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.440631] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.446931] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.454663] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.461916] usb usb1: Product: xHCI Host Controller [ 6.466665] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.472926] usb usb1: SerialNumber: 3610000.xhci [ 6.478552] hub 1-0:1.0: USB hub found [ 6.481813] hub 1-0:1.0: 4 ports detected [ 6.486365] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.490892] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.498802] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.506531] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.514396] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.521629] usb usb2: Product: xHCI Host Controller [ 6.526351] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.532517] usb usb2: SerialNumber: 3610000.xhci [ 6.537797] hub 2-0:1.0: USB hub found [ 6.541285] hub 2-0:1.0: 4 ports detected [ 6.585649] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.591724] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.593395] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.593582] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.606723] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.607868] tegra194-cpufreq ccplex: probed with BWMGR [ 6.609172] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.609605] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.610055] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.611548] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.618182] tegra194-vi5 15c10000.vi: initialized [ 6.618318] random: crng init done [ 6.619308] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.620771] mmc0: CQHCI version 5.10 [ 6.620978] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.621268] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.621273] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.621280] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.621284] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.621288] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.624858] generic_infoframe_type: 0x87 [ 6.628730] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.634495] tegradc 15200000.display: DT parsed successfully [ 6.642843] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.648926] tegradc 15200000.display: Display dc.00000000281f3acf registered with id=0 [ 6.655711] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.657071] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.663161] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.670158] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.672401] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.672408] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.685168] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.691416] nvethernet 2490000.ethernet: Macsec not supported [ 6.699711] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.699915] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.707675] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.715415] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.723635] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.729818] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.731938] tegradc 15200000.display: probed [ 6.738304] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.743672] mmc0: Command Queue Engine enabled [ 6.743677] mmc0: periodic cache flush enabled [ 6.743690] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.744147] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.744244] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.746115] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.748307] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.752813] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.865129] Console: switching to colour frame buffer device 240x67 [ 6.866358] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.870611] tegradc 15200000.display: fb registered [ 6.870681] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.878776] tegra-se-nvhost 15810000.se: initialized [ 6.893138] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.897972] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.898775] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.904981] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.917312] tegra-se-nvhost 15820000.se: initialized [ 6.923790] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.928476] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.934833] tegra-se-nvhost 15830000.se: initialized [ 6.936383] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.940282] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.947342] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.947347] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.947351] usb 1-2: Manufacturer: Generic [ 6.949715] hub 1-2:1.0: USB hub found [ 6.954310] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.962347] hub 1-2:1.0: 4 ports detected [ 6.966454] tegra-se-nvhost 15840000.se: initialized [ 6.966607] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.967693] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.967701] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.968319] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.968322] Extcon AUX1(HDMI) enable [ 6.968479] tegradc 15210000.display: disp1 connected to head1->sor [ 6.968712] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.968876] tegradc 15210000.display: DT parsed successfully [ 6.968948] tegradc 15210000.display: Display dc.00000000d1f2154a registered with id=1 [ 6.969128] tegradc 15210000.display: vblank syncpt # 16 for dc 1 [ 6.969136] tegradc 15210000.display: vpulse3 syncpt # 17 for dc 1 [ 6.975697] tegradc 15210000.display: probed [ 6.981627] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.053535] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.058667] tegra_actmon d230000.actmon: in actmon_register()... [ 7.087557] tegradc 15210000.display: fb registered [ 7.092848] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.095910] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.105328] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.105563] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.113144] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.113186] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.121348] hvc_sysfs: hypervisor is not present [ 7.129019] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.146144] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.146149] usb 2-3: Manufacturer: Generic [ 7.146180] tegradc 15210000.display: blank - powerdown ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.160266] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.160270] Extcon DP: HPD disabled [ 7.160274] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.160284] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.160289] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.160392] tegradc 15200000.display: blank - powerdown [ 7.169911] hub 2-3:1.0: USB hub found [ 7.171807] hub 2-3:1.0: 4 ports detected [ 7.174840] ALSA device list: [ 7.174847] No soundcards found. [ 7.200311] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.200315] Extcon AUX1(HDMI) disable [ 7.220769] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.223618] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.224470] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.237476] tegradc 15200000.display: unblank [ 7.238525] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.238718] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.244674] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.246536] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.250593] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.250597] Extcon AUX1(HDMI) enable [ 7.263303] tegradc 15200000.display: sync windows ret = 247 [ 7.264727] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.309375] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.310286] Freeing unused kernel memory: 3968K [ 7.316591] Extcon HDMI: HPD enabled [ 7.321395] Run /init as init process [ 7.324884] tegradc 15200000.display: hdmi: plugged [ 7.361919] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.363307] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.373960] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.375386] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.376770] usb 1-3: Product: Bluetooth Radio [ 7.378048] usb 1-3: Manufacturer: Realtek [ 7.379282] usb 1-3: SerialNumber: 00e04c000001 [ 7.392181] Root device found: mmcblk0p1 [ 7.395482] Found dev node: /dev/mmcblk0p1 [ 7.431762] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.437154] Rootfs mounted over mmcblk0p1 [ 7.469192] Switching from initrd to actual rootfs [ 7.622156] systemd[1]: System time before build time, advancing clock. [ 7.694519] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.699294] systemd[1]: Detected architecture arm64. [ 7.760713] systemd[1]: Set hostname to . [ 7.927709] systemd-sysv-generator[257]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.272859] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.274524] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.280167] systemd[1]: Created slice system-modprobe.slice. [ 8.284842] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.289066] systemd[1]: Created slice User and Session Slice. [ 8.292512] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.296638] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.300154] systemd[1]: Reached target User and Group Name Lookups. [ 8.303330] systemd[1]: Reached target Slices. [ 8.306323] systemd[1]: Reached target Swap. [ 8.310203] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.313767] systemd[1]: Listening on Syslog Socket. [ 8.317176] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.320466] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.324593] systemd[1]: Listening on Journal Audit Socket. [ 8.328089] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.333078] systemd[1]: Listening on Journal Socket. [ 8.336744] systemd[1]: Listening on udev Control Socket. [ 8.341680] systemd[1]: Listening on udev Kernel Socket. [ 8.350382] systemd[1]: Mounting Huge Pages File System... [ 8.358841] systemd[1]: Mounting POSIX Message Queue File System... [ 8.366943] systemd[1]: Mounting RPC Pipe File System... [ 8.375741] systemd[1]: Mounting Kernel Debug File System... [ 8.384069] systemd[1]: Mounting Kernel Trace File System... [ 8.394274] systemd[1]: Starting Journal Service... [ 8.403528] systemd[1]: Starting Set the console keyboard layout... [ 8.411776] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.415216] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.421717] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.429603] systemd[1]: Started Nameserver information manager. [ 8.434174] systemd[1]: Reached target Network (Pre). [ 8.441176] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.442976] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.451042] systemd[1]: Starting Load Kernel Modules... [ 8.458933] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.467833] systemd[1]: Starting udev Coldplug all Devices... [ 8.477917] systemd[1]: Mounted Huge Pages File System. [ 8.481656] systemd[1]: Mounted POSIX Message Queue File System. [ 8.485418] systemd[1]: Mounted RPC Pipe File System. [ 8.488971] systemd[1]: Mounted Kernel Debug File System. [ 8.490571] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.494485] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.496568] systemd[1]: Mounted Kernel Trace File System. [ 8.496929] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.499457] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.499468] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.499473] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.499657] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.505425] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.505589] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.505598] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.518879] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.527178] systemd[1]: nvfb-udev.service: Succeeded. [ 8.532537] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.544026] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.556753] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.558478] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.567330] systemd[1]: Starting Load/Save Random Seed... [ 8.579037] systemd[1]: Starting Create System Users... [ 8.603716] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.603716] [ 8.623825] systemd[1]: Finished Load/Save Random Seed. [ 8.635477] systemd[1]: Finished Load Kernel Modules. [ 8.642182] systemd[1]: Finished Create System Users. [ 8.646688] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.653999] systemd[1]: Mounting Kernel Configuration File System... [ 8.663342] systemd[1]: Started OP-TEE Client Supplicant. [ 8.671783] systemd[1]: Starting Apply Kernel Variables... [ 8.679273] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.690392] systemd[1]: Finished Set the console keyboard layout. [ 8.694620] systemd[1]: Mounted Kernel Configuration File System. [ 10.086707] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.095175] imx219 9-0010: board setup failed [ 10.096794] imx219: probe of 9-0010 failed with error -121 [ 10.113077] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.139312] imx219 10-0010: board setup failed [ 10.140817] imx219: probe of 10-0010 failed with error -121 [ 10.220196] hot-surface-alert cooling state: 0 -> 1 [ 11.217359] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.219141] Creating 1 MTD partitions on "spi6.0": [ 11.221021] 0x000000000000-0x000002000000 : "Whole_flash0" [ 11.227129] using random self ethernet address [ 11.231213] using random host ethernet address [ 12.514294] using random self ethernet address [ 12.515991] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.784227] nvidia: loading out-of-tree module taints kernel. [ 59.246705] watchdog: watchdog0: watchdog did not stop! [ 59.734131] Trying to unregister non-registered hwtime source [ 62.799136] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.800726] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERþÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.614] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.631] I> edid read success [0003.644] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.644] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.683] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.743] initializing target [0003.744] calling apps_init() [0003.744] starting app kernel_boot_app [0003.745] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000021] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000850] Console: colour dummy device 80x25 [ 0.002240] printk: console [tty0] enabled [ 0.002300] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002334] pid_max: default: 32768 minimum: 301 [ 0.002498] LSM: Security Framework initializing [ 0.002556] Yama: becoming mindful. [ 0.002599] SELinux: Initializing. [ 0.002742] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002779] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005706] rcu: Hierarchical SRCU implementation. [ 0.005949] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006710] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006760] DTB Build time: Aug 10 2022 20:31:49 [ 0.009841] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010143] Remapping and enabling EFI services. [ 0.012131] smp: Bringing up secondary CPUs ... [ 0.041292] Detected PIPT I-cache on CPU1 [ 0.041408] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070963] Detected PIPT I-cache on CPU2 [ 0.071115] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100864] Detected PIPT I-cache on CPU3 [ 0.101010] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130692] Detected PIPT I-cache on CPU4 [ 0.130909] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160668] Detected PIPT I-cache on CPU5 [ 0.160833] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161161] smp: Brought up 1 node, 6 CPUs [ 0.161402] SMP: Total of 6 processors activated. [ 0.161456] CPU features: detected: Privileged Access Never [ 0.161478] CPU features: detected: LSE atomic instructions [ 0.161492] CPU features: detected: User Access Override [ 0.161506] CPU features: detected: 32-bit EL0 Support [ 0.161519] CPU features: detected: RAS Extension Support [ 0.161532] CPU features: detected: CRC32 instructions [ 0.161545] CPU features: detected: 32-bit EL1 Support [ 0.234796] CPU: All CPU(s) started at EL2 [ 0.239896] devtmpfs: initialized [ 0.285578] Registered cp15_barrier emulation handler [ 0.285696] Registered setend emulation handler [ 0.285715] KASLR enabled [ 0.285997] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286021] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287282] pinctrl core: initialized pinctrl subsystem [ 0.288226] SMBIOS 3.0.0 present. [ 0.288265] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288882] NET: Registered protocol family 16 [ 0.290829] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291322] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292015] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292075] audit: initializing netlink subsys (disabled) [ 0.292306] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292713] thermal_sys: Registered thermal governor 'step_wise' [ 0.292718] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292731] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294865] cpuidle: using governor menu [ 0.295284] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295701] ASID allocator initialised with 32768 entries [ 0.295919] Serial: AMBA PL011 UART driver [ 0.299245] Tegra reboot handler registered. [ 0.370410] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.370552] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.370726] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.370770] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.370888] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.370945] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.371056] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.371093] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.371204] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.371241] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.373410] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.373447] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.373475] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.373502] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.373531] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.373558] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.373632] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.373684] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.373709] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.373751] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.373775] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.373817] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.373841] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.373864] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.373888] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.373911] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.373934] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.374022] mc-err: mcerr ops are set to t19x [ 0.385503] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.385539] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.385553] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.385565] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.393405] ACPI: Interpreter disabled. [ 0.394476] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.395691] iommu: Default domain type: Translated [ 0.395754] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.396167] SCSI subsystem initialized [ 0.396320] usbcore: registered new interface driver usbfs [ 0.396361] usbcore: registered new interface driver hub [ 0.396394] usbcore: registered new device driver usb [ 0.396762] mc: Linux media interface: v0.10 [ 0.396788] videodev: Linux video capture interface: v2.00 [ 0.397059] pps_core: LinuxPPS API ver. 1 registered [ 0.397070] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.397088] PTP clock support registered [ 0.397279] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.397590] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.397640] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.398324] Registered efivars operations [ 0.403361] FPGA manager framework [ 0.403460] Advanced Linux Sound Architecture Driver Initialized. [ 0.404008] Bluetooth: Core ver 2.22 [ 0.404044] NET: Registered protocol family 31 [ 0.404055] Bluetooth: HCI device and connection manager initialized [ 0.404070] Bluetooth: HCI socket layer initialized [ 0.404084] Bluetooth: L2CAP socket layer initialized [ 0.404105] Bluetooth: SCO socket layer initialized [ 0.405629] camchar: rtcpu character device driver loaded [ 0.406461] clocksource: Switched to clocksource arch_sys_counter [ 0.691792] VFS: Disk quotas dquot_6.6.0 [ 0.691863] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.692213] pnp: PnP ACPI: disabled [ 0.703303] la/ptsa driver initialized. [ 0.703413] NET: Registered protocol family 2 [ 0.703591] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.708115] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.708206] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.708488] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.708923] TCP: Hash tables configured (established 65536 bind 65536) [ 0.709043] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.709160] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.709344] NET: Registered protocol family 1 [ 0.710295] RPC: Registered named UNIX socket transport module. [ 0.710322] RPC: Registered udp transport module. [ 0.710336] RPC: Registered tcp transport module. [ 0.710348] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.710370] PCI: CLS 0 bytes, default 64 [ 0.710721] Trying to unpack rootfs image as initramfs... [ 0.977849] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.980841] Freeing initrd memory: 8196K [ 0.985269] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.985301] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.985331] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.985671] kvm [1]: IPA Size Limit: 40 bits [ 0.986093] kvm [1]: vgic interrupt IRQ9 [ 0.986704] kvm [1]: VHE mode initialized successfully [ 0.988254] Initialise system trusted keyrings [ 0.988587] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.994838] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.995641] NFS: Registering the id_resolver key type [ 0.995677] Key type id_resolver registered [ 0.995715] Key type id_legacy registered [ 0.995827] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.995850] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.995885] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.007483] NET: Registered protocol family 38 [ 1.007508] Key type asymmetric registered [ 1.007550] Asymmetric key parser 'x509' registered [ 1.007604] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.007842] io scheduler mq-deadline registered [ 1.007859] io scheduler kyber registered [ 1.013583] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.016461] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.016560] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.016672] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.016752] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.016824] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.022894] scrncapt: init (heads:4 wins:6 planes:4) [ 1.022935] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.024160] EINJ: ACPI disabled. [ 1.027950] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.027974] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.027988] tegra-pmc: ### PMC reset level: L1 [ 1.028001] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.028051] tegra-pmc: PMC Prod config success [ 1.034290] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.039651] random: fast init done [ 1.040331] printk: console [ttyTCU0] enabled [ 2.591978] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.596877] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.601308] arm-smmu 10000000.iommu: stage 1 translation [ 2.606557] arm-smmu 10000000.iommu: stage 2 translation [ 2.612055] arm-smmu 10000000.iommu: nested translation [ 2.617420] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.624825] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.635108] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.637672] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.644522] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.651997] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.657564] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.662289] arm-smmu 12000000.iommu: stage 1 translation [ 2.667796] arm-smmu 12000000.iommu: stage 2 translation [ 2.672951] arm-smmu 12000000.iommu: nested translation [ 2.678631] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.685564] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.696193] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.698964] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.705504] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.712881] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.722921] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.725677] tegra_profiler: auth: init [ 2.730002] THERMAL EST: found 3 subdevs [ 2.733630] THERMAL EST num_resources: 0 [ 2.737181] [THERMAL EST subdev 0] [ 2.740766] [THERMAL EST subdev 1] [ 2.744177] [THERMAL EST subdev 2] [ 2.747154] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.753859] THERMAL EST: thz register success. [ 2.758141] THERMAL EST: end of probe, return err: 0 [ 2.763495] nvsciipc: loaded module [ 2.770250] tun: Universal TUN/TAP device driver, 1.6 [ 2.772608] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.778978] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.784535] e1000e: Intel(R) PRO/1000 Network Driver [ 2.789706] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.795790] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.800795] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.807205] PPP generic driver version 2.4.2 [ 2.811266] PPP BSD Compression module registered [ 2.816050] PPP Deflate Compression module registered [ 2.821013] PPP MPPE Compression module registered [ 2.826067] usbcore: registered new interface driver r8152 [ 2.831551] usbcore: registered new interface driver asix [ 2.837117] usbcore: registered new interface driver ax88179_178a [ 2.842978] usbcore: registered new interface driver cdc_ether [ 2.848932] usbcore: registered new interface driver net1080 [ 2.854530] usbcore: registered new interface driver cdc_subset [ 2.860586] usbcore: registered new interface driver zaurus [ 2.866516] usbcore: registered new interface driver cdc_ncm [ 2.871964] usbcore: registered new interface driver aqc111 [ 2.877603] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.883707] ohci-pci: OHCI PCI platform driver [ 2.888238] ohci-platform: OHCI generic platform driver [ 2.894099] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.900514] usbcore: registered new interface driver uas [ 2.904573] usbcore: registered new interface driver usb-storage [ 2.910672] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.916755] mousedev: PS/2 mouse device common for all mice [ 2.921420] usbcore: registered new interface driver xpad [ 2.929491] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.933486] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.940236] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.946426] i2c /dev entries driver [ 2.949830] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.955931] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.960968] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.966280] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.971924] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.977468] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.982697] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.996623] device-mapper: uevent: version 1.0.3 [ 2.997061] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.002832] cpuidle: Initializing cpuidle driver [ 3.006985] sdhci: Secure Digital Host Controller Interface driver [ 3.012015] sdhci: Copyright(c) Pierre Ossman [ 3.016113] Synopsys Designware Multimedia Card Interface Driver [ 3.022283] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.028135] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.028800] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.041532] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.059211] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.068720] vdd-1v0: supplied by regulator-dummy [ 3.074150] vdd-1v8-hs: supplied by regulator-dummy [ 3.078929] vdd-1v8-ls: supplied by regulator-dummy [ 3.083648] vdd-1v8-ao: supplied by regulator-dummy [ 3.087535] vddio-ddr-1v1: supplied by regulator-dummy [ 3.091871] vdd-rtc: supplied by regulator-dummy [ 3.093678] spmic-ldo1: supplied by regulator-dummy [ 3.094861] vdd-ao-3v3: supplied by regulator-dummy [ 3.100958] vddio-emmc-3v3: supplied by regulator-dummy [ 3.107233] spmic-ldo4: supplied by regulator-dummy [ 3.108417] vdd-usb-3v3: supplied by regulator-dummy [ 3.114550] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.120639] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.126093] spmic-ldo8: supplied by vdd-1v8-ls [ 3.127552] gpio-510 (gpio_default): hogged as output/high [ 3.128923] gpio-511 (gpio_default): hogged as output/high [ 3.135002] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.273554] max77686-rtc max77620-rtc: registered as rtc0 [ 3.274564] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.274906] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.005877] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.007167] hid: raw HID events driver (C) Jiri Kosina [ 4.008095] usbcore: registered new interface driver usbhid [ 4.008243] usbhid: USB HID core driver [ 4.010823] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.012229] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.858861] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.932363] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 74.310 ms) ÿá[ 4.096623] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.097371] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.099086] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.100091] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.102088] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.103485] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.104055] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.106058] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.106318] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.109956] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.113284] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.119387] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.124406] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.131041] denver_knobs_init:MTS_VERSION:55637613 [ 4.143985] t19x_cache tegra-cache: probed [ 4.147143] optee: probing for conduit method. [ 4.147984] optee: revision 3.16 (65cc2218) [ 4.149097] optee: dynamic shared memory is enabled [ 4.150777] optee: initialized driver [ 4.157738] nvpmodel: initialized successfully [ 4.158414] tegra_hv: get_hvd: not initialized yet [ 4.163376] user_ivc_mempool: hypervisor not present [ 4.169749] usbcore: registered new interface driver snd-usb-audio [ 4.175664] u32 classifier [ 4.176929] input device check on [ 4.180794] Actions configured [ 4.184073] Initializing XFRM netlink socket [ 4.189026] NET: Registered protocol family 10 [ 4.195451] Segment Routing with IPv6 [ 4.196538] NET: Registered protocol family 17 [ 4.200853] NET: Registered protocol family 15 [ 4.205094] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.218699] Bluetooth: RFCOMM socket layer initialized [ 4.223564] Bluetooth: RFCOMM ver 1.11 [ 4.227127] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.233240] Bluetooth: HIDP socket layer initialized [ 4.239273] 9pnet: Installing 9P2000 support [ 4.242377] Key type dns_resolver registered [ 4.248708] registered taskstats version 1 [ 4.250922] Loading compiled-in X.509 certificates [ 4.266018] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.267783] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.278524] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.279133] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.287449] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.296202] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.414547] tegra194-pcie 14160000.pcie: Link up [ 4.417665] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.417903] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.418041] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.418368] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.418707] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.419085] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.419605] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.435535] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.436072] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.436551] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.438117] pci 0004:01:00.0: supports D1 D2 [ 4.438282] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.451284] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.451679] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.452039] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.452453] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.452760] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.452994] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.453218] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.456558] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.465288] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.475590] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.479854] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.485994] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.493233] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.503121] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.503642] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.511673] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.520266] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.635845] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.636642] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.636865] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.637069] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.637305] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.637536] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.637904] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.638366] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.656607] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.656902] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.659057] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.660392] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.662261] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.663921] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.664725] pci 0005:00:00.0: Removing from iommu group 7 [ 5.665030] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.696800] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.718265] host1x 13e10000.host1x: initialized [ 5.719993] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.720803] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.721641] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.722281] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.723233] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.723771] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.724514] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.725054] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.729103] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.735922] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.746157] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.752835] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.763044] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.769862] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.780253] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.787157] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.796956] falcon 15340000.vic: Adding to iommu group 17 [ 5.810954] falcon 15340000.vic: initialized [ 5.811913] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.817499] falcon 15380000.nvjpg: initialized [ 5.818257] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.829463] falcon 154c0000.nvenc: initialized [ 5.830123] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.839650] falcon 15a80000.nvenc1: initialized [ 5.840372] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.853198] nvdec 15480000.nvdec: initialized [ 5.853794] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.863613] nvdec 15140000.nvdec1: initialized [ 5.864244] tsec 15500000.tsec: Adding to iommu group 18 [ 5.870000] tsec 15500000.tsec: initialized [ 5.870938] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.876741] tsec 15100000.tsecb: initialized [ 5.880775] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.904495] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.917862] gpio-374 (wifi-enable): hogged as output/high [ 5.918190] gpio-431 (camera-control-output-low): hogged as output/low [ 5.918623] gpio-432 (camera-control-output-low): hogged as output/low [ 5.920963] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.922827] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.923427] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.928248] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.933368] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.939229] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.945346] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.953273] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.960628] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.971793] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.977080] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.983185] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.991740] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.001400] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.008780] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.016397] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.022024] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.032499] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.038110] pva 16000000.pva0: Adding to iommu group 22 [ 6.064454] pva 16000000.pva0: initialized [ 6.069435] pva 16800000.pva1: Adding to iommu group 23 [ 6.080204] pva 16800000.pva1: initialized [ 6.084485] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.097310] nvdla 15880000.nvdla0: initialized [ 6.098980] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.108290] nvdla 158c0000.nvdla1: initialized [ 6.112179] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.112494] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.112994] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.113040] tegradc 15200000.display: Adding to iommu group 26 [ 6.113367] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.113499] tegradccommon 15200000.display-hub: dma mapping done [ 6.114995] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.121311] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.121575] tegradc 15210000.display: Adding to iommu group 26 [ 6.122083] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.122637] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.122642] tegra_cec 3960000.tegra_cec: probed [ 6.123435] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.128660] generic_infoframe_type: 0x87 [ 6.130006] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.130420] kfuse 3830000.kfuse: initialized [ 6.131014] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.131018] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.131539] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.140057] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.145869] tegradc 15200000.display: DT parsed successfully [ 6.152013] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.156239] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.171237] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.181993] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.185385] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.189914] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.189924] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.190963] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.199898] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.204503] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.205886] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.223663] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.230889] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.235683] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.235778] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.242677] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.250811] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.260471] tegradc 15210000.display: disp0 connected to head1->sor [ 6.263965] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.264921] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.272503] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.278584] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.289864] tegradc 15210000.display: DT parsed successfully [ 6.298909] usb usb1: Product: xHCI Host Controller [ 6.298925] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.306089] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.311331] usb usb1: SerialNumber: 3610000.xhci [ 6.313116] hub 1-0:1.0: USB hub found [ 6.403723] hub 1-0:1.0: 4 ports detected [ 6.408992] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.413235] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.420978] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.428738] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.436731] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.443558] usb usb2: Product: xHCI Host Controller [ 6.448693] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.454822] usb usb2: SerialNumber: 3610000.xhci [ 6.461049] hub 2-0:1.0: USB hub found [ 6.463286] hub 2-0:1.0: 4 ports detected [ 6.509918] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.516706] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.517997] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.518192] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.531646] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.532674] tegra194-cpufreq ccplex: probed with BWMGR [ 6.533981] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.534604] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.535057] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.536238] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.543785] tegra194-vi5 15c10000.vi: initialized [ 6.544863] mmc0: CQHCI version 5.10 [ 6.545512] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.546712] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.547392] generic_infoframe_type: 0x87 [ 6.553563] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.557503] tegradc 15200000.display: DT parsed successfully [ 6.565713] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.571160] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.577521] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.592359] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.592375] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.598848] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.606534] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.607152] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.613547] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.617197] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.619658] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.634805] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.642609] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.650720] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.650966] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.658587] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.666508] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.688720] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.702487] nvethernet 2490000.ethernet: Macsec not supported [ 6.702519] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.709864] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.718598] tegradc 15200000.display: probed [ 6.725056] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.734132] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.741403] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.749574] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.755967] tegra-se-nvhost 15810000.se: initialized [ 6.764199] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.766064] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.772327] tegra-se-nvhost 15820000.se: initialized [ 6.778904] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.783457] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.789587] Console: switching to colour frame buffer device 240x67 [ 6.790981] tegra-se-nvhost 15830000.se: initialized [ 6.795035] mmc0: Command Queue Engine enabled [ 6.795041] mmc0: periodic cache flush enabled [ 6.795058] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.795201] tegradc 15200000.display: fb registered [ 6.795511] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.795677] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.799468] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.801401] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.804733] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.809521] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.858282] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.859065] tegra-se-nvhost 15840000.se: initialized [ 6.869249] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.871154] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.883161] tegra_actmon d230000.actmon: in actmon_register()... [ 6.887758] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.892980] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.901655] hvc_sysfs: hypervisor is not present [ 6.905652] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.913755] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.921096] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.925384] usb 1-2: Manufacturer: Generic [ 6.931438] hub 1-2:1.0: USB hub found [ 6.933604] ALSA device list: [ 6.934698] hub 1-2:1.0: 4 ports detected [ 6.936701] No soundcards found. [ 6.951018] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.954565] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.960925] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.969773] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.976224] Extcon AUX1(HDMI) enable [ 6.979993] tegradc 15210000.display: disp1 connected to head1->sor [ 6.985920] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.993186] tegradc 15210000.display: DT parsed successfully [ 6.998846] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.006689] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.007323] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.012448] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.019237] tegradc 15210000.display: probed [ 7.030898] tegradc 15210000.display: fb registered [ 7.039162] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.041899] Freeing unused kernel memory: 3968K [ 7.042817] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.042828] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.056170] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.069423] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.069428] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.069431] usb 2-3: Manufacturer: Generic [ 7.069442] tegradc 15210000.display: blank - powerdown [ 7.078751] Run /init as init process [ 7.080292] hub 2-3:1.0: USB hub found [ 7.080877] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.082146] hub 2-3:1.0: 4 ports detected [ 7.090580] Extcon DP: HPD disabled [ 7.090587] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.097684] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.110274] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.133590] tegradc 15200000.display: blank - powerdown [ 7.134504] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.168045] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.168049] Extcon AUX1(HDMI) disable [ 7.190502] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.191450] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.192345] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.199072] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.199078] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.204092] tegradc 15200000.display: unblank [ 7.205230] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.205430] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.211235] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.213152] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.217154] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.217158] Extcon AUX1(HDMI) enable [ 7.229933] tegradc 15200000.display: sync windows ret = 247 [ 7.258001] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.259429] Extcon HDMI: HPD enabled [ 7.260732] tegradc 15200000.display: hdmi: plugged [ 7.310360] Root device found: mmcblk0p1 [ 7.314085] Found dev node: /dev/mmcblk0p1 [ 7.339827] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.341203] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.342514] usb 1-3: Product: Bluetooth Radio [ 7.343743] usb 1-3: Manufacturer: Realtek [ 7.344937] usb 1-3: SerialNumber: 00e04c000001 [ 7.350437] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.355919] Rootfs mounted over mmcblk0p1 [ 7.388744] Switching from initrd to actual rootfs [ 7.557505] systemd[1]: System time before build time, advancing clock. [ 7.631066] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.635790] systemd[1]: Detected architecture arm64. [ 7.673929] systemd[1]: Set hostname to . [ 7.848159] systemd-sysv-generator[251]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.973639] random: crng init done [ 8.195603] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.197281] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.203057] systemd[1]: Created slice system-modprobe.slice. [ 8.207711] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.211834] systemd[1]: Created slice User and Session Slice. [ 8.215203] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.219345] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.222624] systemd[1]: Reached target User and Group Name Lookups. [ 8.225745] systemd[1]: Reached target Slices. [ 8.228936] systemd[1]: Reached target Swap. [ 8.232866] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.236515] systemd[1]: Listening on Syslog Socket. [ 8.240052] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.243392] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.247656] systemd[1]: Listening on Journal Audit Socket. [ 8.251289] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.254997] systemd[1]: Listening on Journal Socket. [ 8.258655] systemd[1]: Listening on udev Control Socket. [ 8.262135] systemd[1]: Listening on udev Kernel Socket. [ 8.270998] systemd[1]: Mounting Huge Pages File System... [ 8.279882] systemd[1]: Mounting POSIX Message Queue File System... [ 8.289516] systemd[1]: Mounting RPC Pipe File System... [ 8.298374] systemd[1]: Mounting Kernel Debug File System... [ 8.307418] systemd[1]: Mounting Kernel Trace File System... [ 8.317648] systemd[1]: Starting Journal Service... [ 8.326674] systemd[1]: Starting Set the console keyboard layout... [ 8.335154] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.338747] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.345210] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.353196] systemd[1]: Started Nameserver information manager. [ 8.358365] systemd[1]: Reached target Network (Pre). [ 8.365921] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.367806] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.378152] systemd[1]: Starting Load Kernel Modules... [ 8.385871] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.393691] systemd[1]: Starting udev Coldplug all Devices... [ 8.404619] systemd[1]: Mounted Huge Pages File System. [ 8.408263] systemd[1]: Mounted POSIX Message Queue File System. [ 8.411902] systemd[1]: Mounted RPC Pipe File System. [ 8.415555] systemd[1]: Mounted Kernel Debug File System. [ 8.416889] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.417747] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.420703] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.420709] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.420718] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.420723] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.421781] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.421941] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.421951] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.422397] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.438138] systemd[1]: Mounted Kernel Trace File System. [ 8.444582] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.450630] systemd[1]: nvfb-udev.service: Succeeded. [ 8.454676] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.466618] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.480695] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.482550] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.488982] systemd[1]: Starting Load/Save Random Seed... [ 8.497788] systemd[1]: Starting Create System Users... [ 8.516727] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.516727] [ 8.549563] systemd[1]: Finished Load Kernel Modules. [ 8.556490] systemd[1]: Finished Load/Save Random Seed. [ 8.561285] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.568333] systemd[1]: Mounting Kernel Configuration File System... [ 8.576100] systemd[1]: Started OP-TEE Client Supplicant. [ 8.585300] systemd[1]: Starting Apply Kernel Variables... [ 8.592187] systemd[1]: Mounted Kernel Configuration File System. [ 8.603541] systemd[1]: Finished Create System Users. [ 8.609910] systemd[1]: Finished Set the console keyboard layout. [ 9.960670] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.973325] imx219 9-0010: board setup failed [ 9.973430] imx219: probe of 9-0010 failed with error -121 [ 9.987050] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.993882] imx219 10-0010: board setup failed [ 9.995614] imx219: probe of 10-0010 failed with error -121 [ 10.070780] hot-surface-alert cooling state: 0 -> 1 [ 11.079281] using random self ethernet address [ 11.079289] using random host ethernet address [ 11.538585] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.538592] Creating 1 MTD partitions on "spi6.0": [ 11.538601] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.215731] using random self ethernet address [ 12.217289] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.845104] nvidia: loading out-of-tree module taints kernel. [ 58.608711] watchdog: watchdog0: watchdog did not stop! [ 59.111106] Trying to unregister non-registered hwtime source [ 62.169781] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.171477] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] t ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.325] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.474] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.607] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.650] I> edid read success [0003.651] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.652] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.736] I> hdmi_enable, starting HDMI initialisation [0003.741] I> hdmi_enable, HDMI initialisation complete [0003.750] initializing target [0003.751] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000756] Console: colour dummy device 80x25 [ 0.002099] printk: console [tty0] enabled [ 0.002172] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002206] pid_max: default: 32768 minimum: 301 [ 0.002461] LSM: Security Framework initializing [ 0.002519] Yama: becoming mindful. [ 0.002564] SELinux: Initializing. [ 0.002725] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002761] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005777] rcu: Hierarchical SRCU implementation. [ 0.006078] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006861] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006912] DTB Build time: Aug 10 2022 20:31:49 [ 0.010116] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010431] Remapping and enabling EFI services. [ 0.013145] smp: Bringing up secondary CPUs ... [ 0.045948] Detected PIPT I-cache on CPU1 [ 0.046044] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075480] Detected PIPT I-cache on CPU2 [ 0.075631] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105286] Detected PIPT I-cache on CPU3 [ 0.105428] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135120] Detected PIPT I-cache on CPU4 [ 0.135272] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164944] Detected PIPT I-cache on CPU5 [ 0.165106] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165389] smp: Brought up 1 node, 6 CPUs [ 0.165618] SMP: Total of 6 processors activated. [ 0.165642] CPU features: detected: Privileged Access Never [ 0.165655] CPU features: detected: LSE atomic instructions [ 0.165666] CPU features: detected: User Access Override [ 0.165678] CPU features: detected: 32-bit EL0 Support [ 0.165690] CPU features: detected: RAS Extension Support [ 0.165702] CPU features: detected: CRC32 instructions [ 0.165714] CPU features: detected: 32-bit EL1 Support [ 0.234071] CPU: All CPU(s) started at EL2 [ 0.239868] devtmpfs: initialized [ 0.289225] Registered cp15_barrier emulation handler [ 0.289374] Registered setend emulation handler [ 0.289394] KASLR enabled [ 0.289680] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289704] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291111] pinctrl core: initialized pinctrl subsystem [ 0.292130] SMBIOS 3.0.0 present. [ 0.292158] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292772] NET: Registered protocol family 16 [ 0.294857] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295358] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296073] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296127] audit: initializing netlink subsys (disabled) [ 0.296412] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296811] thermal_sys: Registered thermal governor 'step_wise' [ 0.296817] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296832] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298899] cpuidle: using governor menu [ 0.299394] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299809] ASID allocator initialised with 32768 entries [ 0.300049] Serial: AMBA PL011 UART driver [ 0.303893] Tegra reboot handler registered. [ 0.382989] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.383098] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.383276] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.383331] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.383472] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.383515] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.383629] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.383672] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.383804] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.383863] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.386037] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.386071] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.386100] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.386127] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.386155] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.386182] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.386238] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.386270] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.386322] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.386360] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.386387] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.386411] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.386434] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.386462] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.386486] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.386515] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.386540] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.386626] mc-err: mcerr ops are set to t19x [ 0.399125] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.399148] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.399161] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.399173] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.406338] ACPI: Interpreter disabled. [ 0.407457] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.408628] iommu: Default domain type: Translated [ 0.408688] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.409051] SCSI subsystem initialized [ 0.409208] usbcore: registered new interface driver usbfs [ 0.409250] usbcore: registered new interface driver hub [ 0.409286] usbcore: registered new device driver usb [ 0.409654] mc: Linux media interface: v0.10 [ 0.409688] videodev: Linux video capture interface: v2.00 [ 0.410008] pps_core: LinuxPPS API ver. 1 registered [ 0.410020] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.410041] PTP clock support registered [ 0.410232] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.410518] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.410603] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.411188] Registered efivars operations [ 0.418137] FPGA manager framework [ 0.418250] Advanced Linux Sound Architecture Driver Initialized. [ 0.418809] Bluetooth: Core ver 2.22 [ 0.418848] NET: Registered protocol family 31 [ 0.418859] Bluetooth: HCI device and connection manager initialized [ 0.418874] Bluetooth: HCI socket layer initialized [ 0.418889] Bluetooth: L2CAP socket layer initialized [ 0.418935] Bluetooth: SCO socket layer initialized [ 0.420476] camchar: rtcpu character device driver loaded [ 0.421176] clocksource: Switched to clocksource arch_sys_counter [ 0.715977] VFS: Disk quotas dquot_6.6.0 [ 0.716092] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.716449] pnp: PnP ACPI: disabled [ 0.729513] la/ptsa driver initialized. [ 0.729681] NET: Registered protocol family 2 [ 0.729876] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.736127] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.736208] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.736518] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.736948] TCP: Hash tables configured (established 65536 bind 65536) [ 0.737078] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.737201] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.737424] NET: Registered protocol family 1 [ 0.737973] RPC: Registered named UNIX socket transport module. [ 0.737988] RPC: Registered udp transport module. [ 0.737999] RPC: Registered tcp transport module. [ 0.738008] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.738023] PCI: CLS 0 bytes, default 64 [ 0.738206] Trying to unpack rootfs image as initramfs... [ 0.934008] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.936052] Freeing initrd memory: 8196K [ 0.939861] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.939894] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.939931] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.940225] kvm [1]: IPA Size Limit: 40 bits [ 0.940709] kvm [1]: vgic interrupt IRQ9 [ 0.941202] kvm [1]: VHE mode initialized successfully [ 0.942528] Initialise system trusted keyrings [ 0.942806] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.948935] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.949820] NFS: Registering the id_resolver key type [ 0.949848] Key type id_resolver registered [ 0.949858] Key type id_legacy registered [ 0.949944] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.949961] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.949987] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.960379] NET: Registered protocol family 38 [ 0.960400] Key type asymmetric registered [ 0.960411] Asymmetric key parser 'x509' registered [ 0.960467] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.960669] io scheduler mq-deadline registered [ 0.960683] io scheduler kyber registered [ 0.965738] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.968055] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.968114] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.968195] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.968279] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.968352] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.972649] scrncapt: init (heads:4 wins:6 planes:4) [ 0.972984] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.973676] EINJ: ACPI disabled. [ 0.976106] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.976127] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.976137] tegra-pmc: ### PMC reset level: L1 [ 0.976147] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.976183] tegra-pmc: PMC Prod config success [ 0.981139] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.464442] random: fast init done [ 2.531966] printk: console [ttyTCU0] enabled [ 2.537151] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.542338] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.546872] arm-smmu 10000000.iommu: stage 1 translation [ 2.552382] arm-smmu 10000000.iommu: stage 2 translation [ 2.557911] arm-smmu 10000000.iommu: nested translation [ 2.563234] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.570667] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.580331] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.583801] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.590367] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.597567] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.603136] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.608115] arm-smmu 12000000.iommu: stage 1 translation [ 2.613369] arm-smmu 12000000.iommu: stage 2 translation [ 2.618794] arm-smmu 12000000.iommu: nested translation [ 2.624228] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.631397] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.641457] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.644507] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.651350] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.658351] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.668405] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.671525] tegra_profiler: auth: init [ 2.675670] THERMAL EST: found 3 subdevs [ 2.679179] THERMAL EST num_resources: 0 [ 2.683276] [THERMAL EST subdev 0] [ 2.686601] [THERMAL EST subdev 1] [ 2.689779] [THERMAL EST subdev 2] [ 2.693259] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.699690] THERMAL EST: thz register success. [ 2.703990] THERMAL EST: end of probe, return err: 0 [ 2.708970] nvsciipc: loaded module [ 2.715310] tun: Universal TUN/TAP device driver, 1.6 [ 2.718414] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.725026] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.730318] e1000e: Intel(R) PRO/1000 Network Driver [ 2.735254] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.741573] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.746628] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.752960] PPP generic driver version 2.4.2 [ 2.757294] PPP BSD Compression module registered [ 2.761598] PPP Deflate Compression module registered [ 2.766871] PPP MPPE Compression module registered [ 2.772148] usbcore: registered new interface driver r8152 [ 2.777392] usbcore: registered new interface driver asix [ 2.782702] usbcore: registered new interface driver ax88179_178a [ 2.788830] usbcore: registered new interface driver cdc_ether [ 2.794776] usbcore: registered new interface driver net1080 [ 2.800375] usbcore: registered new interface driver cdc_subset [ 2.806418] usbcore: registered new interface driver zaurus [ 2.812368] usbcore: registered new interface driver cdc_ncm [ 2.817786] usbcore: registered new interface driver aqc111 [ 2.823420] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.829779] ohci-pci: OHCI PCI platform driver [ 2.834072] ohci-platform: OHCI generic platform driver [ 2.839517] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.845755] usbcore: registered new interface driver uas [ 2.850416] usbcore: registered new interface driver usb-storage [ 2.856221] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.862371] mousedev: PS/2 mouse device common for all mice [ 2.867256] usbcore: registered new interface driver xpad [ 2.875259] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.878278] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.885782] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.892282] i2c /dev entries driver [ 2.895898] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.901655] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.906690] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.912396] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.917480] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.923218] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.928662] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.940162] device-mapper: uevent: version 1.0.3 [ 2.940575] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.948764] cpuidle: Initializing cpuidle driver [ 2.952532] sdhci: Secure Digital Host Controller Interface driver [ 2.957609] sdhci: Copyright(c) Pierre Ossman [ 2.961962] Synopsys Designware Multimedia Card Interface Driver [ 2.967857] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.974214] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.974720] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.987049] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.005546] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.014309] vdd-1v0: supplied by regulator-dummy [ 3.019683] vdd-1v8-hs: supplied by regulator-dummy [ 3.024417] vdd-1v8-ls: supplied by regulator-dummy [ 3.029086] vdd-1v8-ao: supplied by regulator-dummy [ 3.032848] vddio-ddr-1v1: supplied by regulator-dummy [ 3.037136] vdd-rtc: supplied by regulator-dummy [ 3.038739] spmic-ldo1: supplied by regulator-dummy [ 3.039937] vdd-ao-3v3: supplied by regulator-dummy [ 3.046075] vddio-emmc-3v3: supplied by regulator-dummy [ 3.052139] spmic-ldo4: supplied by regulator-dummy [ 3.053252] vdd-usb-3v3: supplied by regulator-dummy [ 3.059206] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.065239] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.070704] spmic-ldo8: supplied by vdd-1v8-ls [ 3.072097] gpio-510 (gpio_default): hogged as output/high [ 3.073871] gpio-511 (gpio_default): hogged as output/high [ 3.080920] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.219484] max77686-rtc max77620-rtc: registered as rtc0 [ 3.220742] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.221052] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.916658] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.917606] hid: raw HID events driver (C) Jiri Kosina [ 3.918252] usbcore: registered new interface driver usbhid [ 3.918388] usbhid: USB HID core driver [ 3.920168] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.921249] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.092490] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.168140] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.460 ms) ÿá[ 4.006648] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.007337] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.008443] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.009123] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.010875] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.011532] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.012206] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.013540] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.013834] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.015808] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.023725] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.029587] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.034434] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.041097] denver_knobs_init:MTS_VERSION:55637613 [ 4.054150] t19x_cache tegra-cache: probed [ 4.056476] optee: probing for conduit method. [ 4.057327] optee: revision 3.16 (65cc2218) [ 4.058173] optee: dynamic shared memory is enabled [ 4.061736] optee: initialized driver [ 4.068181] nvpmodel: initialized successfully [ 4.069536] tegra_hv: get_hvd: not initialized yet [ 4.073857] user_ivc_mempool: hypervisor not present [ 4.080232] usbcore: registered new interface driver snd-usb-audio [ 4.086822] u32 classifier [ 4.087736] input device check on [ 4.091354] Actions configured [ 4.094833] Initializing XFRM netlink socket [ 4.099854] NET: Registered protocol family 10 [ 4.105898] Segment Routing with IPv6 [ 4.107032] NET: Registered protocol family 17 [ 4.111574] NET: Registered protocol family 15 [ 4.115988] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.129414] Bluetooth: RFCOMM socket layer initialized [ 4.134263] Bluetooth: RFCOMM ver 1.11 [ 4.138181] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.143773] Bluetooth: HIDP socket layer initialized [ 4.149788] 9pnet: Installing 9P2000 support [ 4.153143] Key type dns_resolver registered [ 4.158864] registered taskstats version 1 [ 4.161660] Loading compiled-in X.509 certificates [ 4.173370] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.177466] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.187476] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.189845] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.198136] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.206805] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.321211] tegra194-pcie 14160000.pcie: Link up [ 4.324052] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.324283] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.324437] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.324672] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.324868] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.325271] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.325685] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.335631] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.336108] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.336506] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.338011] pci 0004:01:00.0: supports D1 D2 [ 4.338208] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.347123] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.347518] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.347808] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.348235] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.348514] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.349789] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.356093] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.363421] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.371947] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.382256] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.386648] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.392235] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.399096] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.407567] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.409941] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.418127] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.426865] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.529493] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.530084] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.530296] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.530494] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.530732] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.530983] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.531339] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.531743] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.548801] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.549348] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.551244] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.552628] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.554110] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.555676] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.556596] pci 0005:00:00.0: Removing from iommu group 7 [ 5.556881] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.587839] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.608549] host1x 13e10000.host1x: initialized [ 5.610182] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.611186] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.612308] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.612971] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.614148] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.614806] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.615722] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.616307] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.622755] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.629597] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.639332] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.646688] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.656518] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.663313] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.673462] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.680593] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.690111] falcon 15340000.vic: Adding to iommu group 17 [ 5.704621] falcon 15340000.vic: initialized [ 5.705530] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.710592] falcon 15380000.nvjpg: initialized [ 5.711036] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.723159] falcon 154c0000.nvenc: initialized [ 5.723688] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.733140] falcon 15a80000.nvenc1: initialized [ 5.733678] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.745374] nvdec 15480000.nvdec: initialized [ 5.745978] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.755411] nvdec 15140000.nvdec1: initialized [ 5.755857] tsec 15500000.tsec: Adding to iommu group 18 [ 5.761602] tsec 15500000.tsec: initialized [ 5.762148] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.770043] tsec 15100000.tsecb: initialized [ 5.773873] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.798051] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.807659] gpio-374 (wifi-enable): hogged as output/high [ 5.807981] gpio-431 (camera-control-output-low): hogged as output/low [ 5.808262] gpio-432 (camera-control-output-low): hogged as output/low [ 5.810090] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.811593] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.815002] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.821593] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.827209] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.832931] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.838239] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.846457] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.854094] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.865318] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.870627] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.876543] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.885383] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.894595] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.902081] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.909647] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.915674] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.925569] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.931569] pva 16000000.pva0: Adding to iommu group 22 [ 5.957801] pva 16000000.pva0: initialized [ 5.962476] pva 16800000.pva1: Adding to iommu group 23 [ 5.973025] pva 16800000.pva1: initialized [ 5.976933] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.997358] nvdla 15880000.nvdla0: initialized [ 5.998514] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.013641] nvdla 158c0000.nvdla1: initialized [ 6.017158] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.017551] tegradc 15200000.display: Adding to iommu group 26 [ 6.017559] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.017822] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.018315] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.018455] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.018790] tegradccommon 15200000.display-hub: dma mapping done [ 6.020007] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.025824] tegradc 15210000.display: Adding to iommu group 26 [ 6.025883] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.026087] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.026267] generic_infoframe_type: 0x87 [ 6.026364] tegradc 15200000.display: DT parsed successfully [ 6.026451] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.056718] tegra_cec 3960000.tegra_cec: probed [ 6.056732] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.062432] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.069635] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.077426] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.084085] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.091124] kfuse 3830000.kfuse: initialized [ 6.103521] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.103574] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.108992] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.121836] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.127817] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.128256] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.145635] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.154171] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.154819] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.167251] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.167958] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.175310] tegradc 15210000.display: disp0 connected to head1->sor [ 6.183954] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.189397] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.195174] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.201933] tegradc 15210000.display: DT parsed successfully [ 6.216629] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.221251] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.233732] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.239306] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.247463] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.256256] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.262682] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.270669] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.277534] usb usb1: Product: xHCI Host Controller [ 6.282731] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.288744] usb usb1: SerialNumber: 3610000.xhci [ 6.294221] hub 1-0:1.0: USB hub found [ 6.297675] hub 1-0:1.0: 4 ports detected [ 6.302196] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.307046] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.314395] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.322252] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.329951] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.337198] usb usb2: Product: xHCI Host Controller [ 6.342444] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.348644] usb usb2: SerialNumber: 3610000.xhci [ 6.353761] hub 2-0:1.0: USB hub found [ 6.357098] hub 2-0:1.0: 4 ports detected [ 6.395809] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.400934] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.402192] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.402371] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.415535] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.416607] tegra194-cpufreq ccplex: probed with BWMGR [ 6.417732] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.418474] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.418949] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.420301] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.431781] tegra194-vi5 15c10000.vi: initialized [ 6.432303] mmc0: CQHCI version 5.10 [ 6.433097] tegradc 15210000.display: disp0 connected to head1->sor [ 6.433888] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.434114] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.434119] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.434127] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.434131] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.434135] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.441258] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.446821] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.455104] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.461481] tegradc 15210000.display: DT parsed successfully [ 6.467965] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.474291] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.474438] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.482654] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.487270] generic_infoframe_type: 0x87 [ 6.487303] tegradc 15200000.display: DT parsed successfully [ 6.495133] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.501627] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.521762] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.528398] nvethernet 2490000.ethernet: Macsec not supported [ 6.535881] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.535885] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.536275] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.541201] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.545343] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.545560] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.554234] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.573205] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.575533] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.576513] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.576519] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.578611] tegradc 15200000.display: probed [ 6.625643] mmc0: Command Queue Engine enabled [ 6.628808] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.635389] mmc0: periodic cache flush enabled [ 6.644065] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.650175] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.659227] tegra-se-nvhost 15810000.se: initialized [ 6.662578] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.671610] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.673110] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.678220] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.695530] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.700803] tegra-se-nvhost 15820000.se: initialized [ 6.732821] Console: switching to colour frame buffer device 240x67 [ 6.734181] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.739007] tegradc 15200000.display: fb registered [ 6.745696] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.750289] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.752935] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.752940] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.752944] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.752947] usb 1-2: Manufacturer: Generic [ 6.754759] hub 1-2:1.0: USB hub found [ 6.755805] hub 1-2:1.0: 4 ports detected [ 6.756795] tegra-se-nvhost 15830000.se: initialized [ 6.762790] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.770924] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.777543] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.782511] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.823957] tegra-se-nvhost 15840000.se: initialized [ 6.829974] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.836210] tegra_actmon d230000.actmon: in actmon_register()... [ 6.840736] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.846274] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.849215] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.854202] hvc_sysfs: hypervisor is not present [ 6.863530] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.875044] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.882202] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.896397] ALSA device list: [ 6.896488] No soundcards found. [ 6.897504] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.903909] Extcon AUX1(HDMI) enable [ 6.907708] tegradc 15210000.display: disp1 connected to head1->sor [ 6.914045] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.921304] tegradc 15210000.display: DT parsed successfully [ 6.927007] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.934991] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.941128] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.942965] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.953940] tegradc 15210000.display: probed [ 6.955451] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.967375] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.967380] tegradc 15210000.display: fb registered [ 6.970815] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.971981] usb 2-3: Manufacturer: Generic [ 6.976632] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.978625] Freeing unused kernel memory: 3968K [ 6.995335] hub 2-3:1.0: USB hub found [ 6.996250] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.002670] hub 2-3:1.0: 4 ports detected [ 7.013320] Run /init as init process [ 7.017869] tegradc 15210000.display: blank - powerdown [ 7.022685] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.030899] Extcon DP: HPD disabled [ 7.030904] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.030912] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.030917] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.041235] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.041240] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.066374] tegradc 15200000.display: blank - powerdown [ 7.077214] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.116322] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.116327] Extcon AUX1(HDMI) disable [ 7.116980] Root device found: mmcblk0p1 [ 7.119003] Found dev node: /dev/mmcblk0p1 [ 7.139695] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.140568] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.153615] tegradc 15200000.display: unblank [ 7.153884] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.155919] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.156125] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.157931] Rootfs mounted over mmcblk0p1 [ 7.162894] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.164752] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.168833] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.168837] Extcon AUX1(HDMI) enable [ 7.181754] tegradc 15200000.display: sync windows ret = 246 [ 7.193637] Switching from initrd to actual rootfs [ 7.213259] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.214796] Extcon HDMI: HPD enabled [ 7.216101] tegradc 15200000.display: hdmi: plugged [ 7.230350] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.231794] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.233196] usb 1-3: Product: Bluetooth Radio [ 7.237840] usb 1-3: Manufacturer: Realtek [ 7.241699] usb 1-3: SerialNumber: 00e04c000001 [ 7.378000] systemd[1]: System time before build time, advancing clock. [ 7.447610] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.452563] systemd[1]: Detected architecture arm64. [ 7.491255] systemd[1]: Set hostname to . [ 7.650945] systemd-sysv-generator[249]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.996430] random: systemd: uninitialized urandom read (16 bytes read) [ 7.998258] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.999912] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.005883] systemd[1]: Created slice system-modprobe.slice. [ 8.009974] random: systemd: uninitialized urandom read (16 bytes read) [ 8.012650] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.015905] random: systemd: uninitialized urandom read (16 bytes read) [ 8.018736] systemd[1]: Created slice User and Session Slice. [ 8.022260] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.026527] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.030036] systemd[1]: Reached target User and Group Name Lookups. [ 8.033404] systemd[1]: Reached target Slices. [ 8.036575] systemd[1]: Reached target Swap. [ 8.040698] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.044453] systemd[1]: Listening on Syslog Socket. [ 8.048147] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.051632] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.055955] systemd[1]: Listening on Journal Audit Socket. [ 8.059704] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.063553] systemd[1]: Listening on Journal Socket. [ 8.067352] systemd[1]: Listening on udev Control Socket. [ 8.071847] systemd[1]: Listening on udev Kernel Socket. [ 8.080466] systemd[1]: Mounting Huge Pages File System... [ 8.090799] systemd[1]: Mounting POSIX Message Queue File System... [ 8.098906] systemd[1]: Mounting RPC Pipe File System... [ 8.107443] systemd[1]: Mounting Kernel Debug File System... [ 8.115960] systemd[1]: Mounting Kernel Trace File System... [ 8.126093] systemd[1]: Starting Journal Service... [ 8.134866] systemd[1]: Starting Set the console keyboard layout... [ 8.143275] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.146897] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.153419] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.161501] systemd[1]: Started Nameserver information manager. [ 8.165687] systemd[1]: Reached target Network (Pre). [ 8.172709] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.172880] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.182433] systemd[1]: Starting Load Kernel Modules... [ 8.192084] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.201071] systemd[1]: Starting udev Coldplug all Devices... [ 8.211003] systemd[1]: Mounted Huge Pages File System. [ 8.215548] systemd[1]: Mounted POSIX Message Queue File System. [ 8.219663] systemd[1]: Mounted RPC Pipe File System. [ 8.219778] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.222017] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.225759] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.227337] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.227349] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.227353] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.227567] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.227752] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.227916] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.227923] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.251086] systemd[1]: Mounted Kernel Debug File System. [ 8.256308] systemd[1]: Mounted Kernel Trace File System. [ 8.263615] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.270558] systemd[1]: nvfb-udev.service: Succeeded. [ 8.275226] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.288358] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.301122] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.303014] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.305968] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.305968] [ 8.310031] systemd[1]: Starting Load/Save Random Seed... [ 8.330036] systemd[1]: Starting Create System Users... [ 8.343136] systemd[1]: Finished Load Kernel Modules. [ 8.347642] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.354346] systemd[1]: Mounting Kernel Configuration File System... [ 8.363347] systemd[1]: Started OP-TEE Client Supplicant. [ 8.371380] systemd[1]: Starting Apply Kernel Variables... [ 8.378719] systemd[1]: Mounted Kernel Configuration File System. [ 8.391962] systemd[1]: Finished Create System Users. [ 8.400288] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.640010] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.648205] imx219 9-0010: board setup failed [ 9.649643] imx219: probe of 9-0010 failed with error -121 [ 9.662078] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.668704] imx219 10-0010: board setup failed [ 9.670164] imx219: probe of 10-0010 failed with error -121 [ 9.678514] random: crng init done [ 9.679727] random: 7 urandom warning(s) missed due to ratelimiting [ 9.704644] hot-surface-alert cooling state: 0 -> 1 [ 10.610196] using random self ethernet address [ 10.610203] using random host ethernet address [ 11.347728] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.349709] Creating 1 MTD partitions on "spi6.0": [ 11.351319] 0x000000000000-0x000002000000 : "Whole_flash0" [ 11.873136] using random self ethernet address [ 11.875327] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.819418] nvidia: loading out-of-tree module taints kernel. [ 58.282935] watchdog: watchdog0: watchdog did not stop! [ 58.771104] Trying to unregister non-registered hwtime source [ 61.827532] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.829135] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized entering main console loop ] bpmp: init complete ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.645] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.647] I> width = 720, height = 480, frequency = 26973026 [0003.651] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.745] initializing target [0003.745] calling apps_init() [0003.746] starting app kernel_boot_app [0003.747] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000020] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000665] Console: colour dummy device 80x25 [ 0.002077] printk: console [tty0] enabled [ 0.002140] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002178] pid_max: default: 32768 minimum: 301 [ 0.002351] LSM: Security Framework initializing [ 0.002411] Yama: becoming mindful. [ 0.002452] SELinux: Initializing. [ 0.002604] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002646] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005465] rcu: Hierarchical SRCU implementation. [ 0.005724] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006617] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006665] DTB Build time: Aug 10 2022 20:31:49 [ 0.009515] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009752] Remapping and enabling EFI services. [ 0.011726] smp: Bringing up secondary CPUs ... [ 0.046362] Detected PIPT I-cache on CPU1 [ 0.046461] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075962] Detected PIPT I-cache on CPU2 [ 0.076107] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105806] Detected PIPT I-cache on CPU3 [ 0.105944] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135609] Detected PIPT I-cache on CPU4 [ 0.135787] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165555] Detected PIPT I-cache on CPU5 [ 0.165740] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166032] smp: Brought up 1 node, 6 CPUs [ 0.166217] SMP: Total of 6 processors activated. [ 0.166266] CPU features: detected: Privileged Access Never [ 0.166288] CPU features: detected: LSE atomic instructions [ 0.166302] CPU features: detected: User Access Override [ 0.166314] CPU features: detected: 32-bit EL0 Support [ 0.166326] CPU features: detected: RAS Extension Support [ 0.166338] CPU features: detected: CRC32 instructions [ 0.166349] CPU features: detected: 32-bit EL1 Support [ 0.235507] CPU: All CPU(s) started at EL2 [ 0.242364] devtmpfs: initialized [ 0.294839] Registered cp15_barrier emulation handler [ 0.294971] Registered setend emulation handler [ 0.294994] KASLR enabled [ 0.295297] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.295324] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.296816] pinctrl core: initialized pinctrl subsystem [ 0.298432] SMBIOS 3.0.0 present. [ 0.298465] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.299143] NET: Registered protocol family 16 [ 0.301096] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.301826] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.302746] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.302801] audit: initializing netlink subsys (disabled) [ 0.303002] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.303422] thermal_sys: Registered thermal governor 'step_wise' [ 0.303428] thermal_sys: Registered thermal governor 'power_allocator' [ 0.303443] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.305809] cpuidle: using governor menu [ 0.306167] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.306670] ASID allocator initialised with 32768 entries [ 0.306914] Serial: AMBA PL011 UART driver [ 0.310133] Tegra reboot handler registered. [ 0.382717] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.382903] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.383078] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.383133] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.383289] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.383347] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.383462] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.383517] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.383636] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.383687] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.385821] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.385857] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.385888] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.385918] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.385970] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.386016] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.386060] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.386109] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.386134] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.386158] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.386183] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.386207] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.386232] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.386255] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.386279] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.386303] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.386326] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.386472] mc-err: mcerr ops are set to t19x [ 0.398565] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.398589] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.398602] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.398614] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.404922] ACPI: Interpreter disabled. [ 0.406050] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.407329] iommu: Default domain type: Translated [ 0.407414] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.407798] SCSI subsystem initialized [ 0.408060] usbcore: registered new interface driver usbfs [ 0.408106] usbcore: registered new interface driver hub [ 0.408142] usbcore: registered new device driver usb [ 0.408516] mc: Linux media interface: v0.10 [ 0.408546] videodev: Linux video capture interface: v2.00 [ 0.408826] pps_core: LinuxPPS API ver. 1 registered [ 0.408842] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.408861] PTP clock support registered [ 0.409056] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.409326] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.409405] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.409939] Registered efivars operations [ 0.415907] FPGA manager framework [ 0.416006] Advanced Linux Sound Architecture Driver Initialized. [ 0.416581] Bluetooth: Core ver 2.22 [ 0.416619] NET: Registered protocol family 31 [ 0.416630] Bluetooth: HCI device and connection manager initialized [ 0.416646] Bluetooth: HCI socket layer initialized [ 0.416661] Bluetooth: L2CAP socket layer initialized [ 0.416682] Bluetooth: SCO socket layer initialized [ 0.418185] camchar: rtcpu character device driver loaded [ 0.418855] clocksource: Switched to clocksource arch_sys_counter [ 0.725384] VFS: Disk quotas dquot_6.6.0 [ 0.725457] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.725872] pnp: PnP ACPI: disabled [ 0.738022] la/ptsa driver initialized. [ 0.738137] NET: Registered protocol family 2 [ 0.738307] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.742892] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.742956] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.743268] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.743719] TCP: Hash tables configured (established 65536 bind 65536) [ 0.743849] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.743938] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.744118] NET: Registered protocol family 1 [ 0.744758] RPC: Registered named UNIX socket transport module. [ 0.744773] RPC: Registered udp transport module. [ 0.744794] RPC: Registered tcp transport module. [ 0.744804] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.744819] PCI: CLS 0 bytes, default 64 [ 0.745005] Trying to unpack rootfs image as initramfs... [ 0.928023] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.930140] Freeing initrd memory: 8196K [ 0.934094] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.934150] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.934188] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.934616] kvm [1]: IPA Size Limit: 40 bits [ 0.935171] kvm [1]: vgic interrupt IRQ9 [ 0.935601] kvm [1]: VHE mode initialized successfully [ 0.936820] Initialise system trusted keyrings [ 0.937091] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.941931] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.942683] NFS: Registering the id_resolver key type [ 0.942713] Key type id_resolver registered [ 0.942723] Key type id_legacy registered [ 0.942791] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.942818] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.942892] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.950558] NET: Registered protocol family 38 [ 0.950578] Key type asymmetric registered [ 0.950589] Asymmetric key parser 'x509' registered [ 0.950638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.950877] io scheduler mq-deadline registered [ 0.950891] io scheduler kyber registered [ 0.955645] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.957942] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.958001] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.958051] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.958099] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.958148] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.962811] scrncapt: init (heads:4 wins:6 planes:4) [ 0.963133] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.963793] EINJ: ACPI disabled. [ 0.966034] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.966055] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.966065] tegra-pmc: ### PMC reset level: L1 [ 0.966075] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.966143] tegra-pmc: PMC Prod config success [ 0.971034] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.975133] random: fast init done [ 0.975257] printk: console [ttyTCU0] enabled [ 2.528187] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.532198] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.537075] arm-smmu 10000000.iommu: stage 1 translation [ 2.542337] arm-smmu 10000000.iommu: stage 2 translation [ 2.548059] arm-smmu 10000000.iommu: nested translation [ 2.553107] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.560283] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.571422] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.573404] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.580225] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.588128] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.593261] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.597984] arm-smmu 12000000.iommu: stage 1 translation [ 2.603283] arm-smmu 12000000.iommu: stage 2 translation [ 2.608946] arm-smmu 12000000.iommu: nested translation [ 2.614348] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.621546] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.632268] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.634623] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.640953] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.648660] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.658083] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.661675] tegra_profiler: auth: init [ 2.665866] THERMAL EST: found 3 subdevs [ 2.669304] THERMAL EST num_resources: 0 [ 2.672890] [THERMAL EST subdev 0] [ 2.676470] [THERMAL EST subdev 1] [ 2.679908] [THERMAL EST subdev 2] [ 2.682876] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.689316] THERMAL EST: thz register success. [ 2.693570] THERMAL EST: end of probe, return err: 0 [ 2.699169] nvsciipc: loaded module [ 2.706281] tun: Universal TUN/TAP device driver, 1.6 [ 2.708438] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.714640] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.720469] e1000e: Intel(R) PRO/1000 Network Driver [ 2.725146] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.731479] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.736757] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.742948] PPP generic driver version 2.4.2 [ 2.746973] PPP BSD Compression module registered [ 2.751734] PPP Deflate Compression module registered [ 2.756720] PPP MPPE Compression module registered [ 2.761997] usbcore: registered new interface driver r8152 [ 2.767260] usbcore: registered new interface driver asix [ 2.772834] usbcore: registered new interface driver ax88179_178a [ 2.778958] usbcore: registered new interface driver cdc_ether [ 2.784701] usbcore: registered new interface driver net1080 [ 2.790503] usbcore: registered new interface driver cdc_subset [ 2.796546] usbcore: registered new interface driver zaurus [ 2.802250] usbcore: registered new interface driver cdc_ncm [ 2.807925] usbcore: registered new interface driver aqc111 [ 2.813607] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.819400] ohci-pci: OHCI PCI platform driver [ 2.823968] ohci-platform: OHCI generic platform driver [ 2.829853] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.836210] usbcore: registered new interface driver uas [ 2.839972] usbcore: registered new interface driver usb-storage [ 2.846430] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.852390] mousedev: PS/2 mouse device common for all mice [ 2.857124] usbcore: registered new interface driver xpad [ 2.865411] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.868161] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.875661] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.882243] i2c /dev entries driver [ 2.885569] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.891301] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.896778] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.902115] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.907383] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.913134] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.918622] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.931831] device-mapper: uevent: version 1.0.3 [ 2.932301] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.939505] cpuidle: Initializing cpuidle driver [ 2.943061] sdhci: Secure Digital Host Controller Interface driver [ 2.947463] sdhci: Copyright(c) Pierre Ossman [ 2.951833] Synopsys Designware Multimedia Card Interface Driver [ 2.957759] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.963991] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.964901] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.977335] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.000753] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.010739] vdd-1v0: supplied by regulator-dummy [ 3.016318] vdd-1v8-hs: supplied by regulator-dummy [ 3.021195] vdd-1v8-ls: supplied by regulator-dummy [ 3.026136] vdd-1v8-ao: supplied by regulator-dummy [ 3.030145] vddio-ddr-1v1: supplied by regulator-dummy [ 3.034638] vdd-rtc: supplied by regulator-dummy [ 3.036536] spmic-ldo1: supplied by regulator-dummy [ 3.037820] vdd-ao-3v3: supplied by regulator-dummy [ 3.044184] vddio-emmc-3v3: supplied by regulator-dummy [ 3.050460] spmic-ldo4: supplied by regulator-dummy [ 3.051775] vdd-usb-3v3: supplied by regulator-dummy [ 3.058096] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.064326] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.070019] spmic-ldo8: supplied by vdd-1v8-ls [ 3.071483] gpio-510 (gpio_default): hogged as output/high [ 3.072841] gpio-511 (gpio_default): hogged as output/high [ 3.075869] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.211580] max77686-rtc max77620-rtc: registered as rtc0 [ 3.212675] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.213012] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.055028] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.056224] hid: raw HID events driver (C) Jiri Kosina [ 4.057115] usbcore: registered new interface driver usbhid [ 4.057274] usbhid: USB HID core driver [ 4.059528] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.060732] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.204667] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.279034] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.177 ms) ÿá[ 4.145035] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.145690] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.147034] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.147791] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.149771] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.150408] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.151045] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.152398] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.152715] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.154635] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.161872] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.167932] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.173213] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.180014] denver_knobs_init:MTS_VERSION:55637613 [ 4.191556] t19x_cache tegra-cache: probed [ 4.194060] optee: probing for conduit method. [ 4.195053] optee: revision 3.16 (65cc2218) [ 4.196227] optee: dynamic shared memory is enabled [ 4.199900] optee: initialized driver [ 4.206487] nvpmodel: initialized successfully [ 4.207634] tegra_hv: get_hvd: not initialized yet [ 4.212423] user_ivc_mempool: hypervisor not present [ 4.218477] usbcore: registered new interface driver snd-usb-audio [ 4.224598] u32 classifier [ 4.226080] input device check on [ 4.229844] Actions configured [ 4.233145] Initializing XFRM netlink socket [ 4.238047] NET: Registered protocol family 10 [ 4.245111] Segment Routing with IPv6 [ 4.245708] NET: Registered protocol family 17 [ 4.249744] NET: Registered protocol family 15 [ 4.254430] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.268090] Bluetooth: RFCOMM socket layer initialized [ 4.272395] Bluetooth: RFCOMM ver 1.11 [ 4.276531] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.282105] Bluetooth: HIDP socket layer initialized [ 4.288188] 9pnet: Installing 9P2000 support [ 4.291808] Key type dns_resolver registered [ 4.296989] registered taskstats version 1 [ 4.300250] Loading compiled-in X.509 certificates [ 4.312467] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.315942] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.326208] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.327944] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.336539] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.345143] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.462909] tegra194-pcie 14160000.pcie: Link up [ 4.465830] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.466112] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.466260] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.466496] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.466683] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.467093] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.467505] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.477384] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.477912] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.478319] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.479919] pci 0004:01:00.0: supports D1 D2 [ 4.480109] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.488464] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.488806] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.489066] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.489462] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.489740] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.491385] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.497468] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.504848] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.513642] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.523775] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.528587] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.533643] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.540401] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.549877] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.551594] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.559762] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.568640] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.683452] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.684169] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.684402] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.684551] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.684868] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.685051] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.685468] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.685869] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.701253] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.701652] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.703289] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.704464] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.705889] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.707444] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.708205] pci 0005:00:00.0: Removing from iommu group 7 [ 5.708447] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.736316] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.757382] host1x 13e10000.host1x: initialized [ 5.758955] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.759768] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.760856] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.761471] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.762526] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.763169] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.764211] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.766574] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.776675] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.783786] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.793875] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.800824] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.810476] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.817785] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.827523] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.834364] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.844211] falcon 15340000.vic: Adding to iommu group 17 [ 5.859491] falcon 15340000.vic: initialized [ 5.860391] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.866108] falcon 15380000.nvjpg: initialized [ 5.866703] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.877460] falcon 154c0000.nvenc: initialized [ 5.878057] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.886904] falcon 15a80000.nvenc1: initialized [ 5.887471] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.899248] nvdec 15480000.nvdec: initialized [ 5.899864] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.908699] nvdec 15140000.nvdec1: initialized [ 5.909195] tsec 15500000.tsec: Adding to iommu group 18 [ 5.915767] tsec 15500000.tsec: initialized [ 5.916205] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.924414] tsec 15100000.tsecb: initialized [ 5.927778] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.953370] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.965017] gpio-374 (wifi-enable): hogged as output/high [ 5.965346] gpio-431 (camera-control-output-low): hogged as output/low [ 5.965653] gpio-432 (camera-control-output-low): hogged as output/low [ 5.967370] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.969036] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.969581] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.975574] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.981114] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.986816] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.992461] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.001215] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.008271] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.019741] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.024543] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.030548] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.039322] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.048909] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.056286] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.063550] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.069742] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.079427] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.085739] pva 16000000.pva0: Adding to iommu group 22 [ 6.113912] pva 16000000.pva0: initialized [ 6.119476] pva 16800000.pva1: Adding to iommu group 23 [ 6.137946] pva 16800000.pva1: initialized [ 6.142551] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.163138] nvdla 15880000.nvdla0: initialized [ 6.164542] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.173037] nvdla 158c0000.nvdla1: initialized [ 6.175208] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.175483] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.176011] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.176116] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.176629] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.176670] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.177067] tegradccommon 15200000.display-hub: dma mapping done [ 6.177179] tegra_cec 3960000.tegra_cec: probed [ 6.178197] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.182274] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.182727] tegradc 15210000.display: Adding to iommu group 26 [ 6.182736] tegradc 15200000.display: Adding to iommu group 26 [ 6.187652] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.192061] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.197891] kfuse 3830000.kfuse: initialized [ 6.204219] generic_infoframe_type: 0x87 [ 6.211446] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.214945] tegradc 15200000.display: DT parsed successfully [ 6.218874] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.225305] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.231789] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.242696] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.246365] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.251506] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.251530] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.261502] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.269700] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.277179] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.284679] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.291730] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.298249] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.306141] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.315329] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.329354] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.338127] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.344201] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.344285] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.356356] tegradc 15210000.display: disp0 connected to head1->sor [ 6.361924] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.366768] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.373772] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.380254] tegradc 15210000.display: DT parsed successfully [ 6.390345] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.396747] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.424171] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.431565] usb usb1: Product: xHCI Host Controller [ 6.436207] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.442781] usb usb1: SerialNumber: 3610000.xhci [ 6.448824] hub 1-0:1.0: USB hub found [ 6.451295] hub 1-0:1.0: 4 ports detected [ 6.456004] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.460839] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.468433] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.476004] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.483925] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.491448] usb usb2: Product: xHCI Host Controller [ 6.496121] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.502377] usb usb2: SerialNumber: 3610000.xhci [ 6.508099] hub 2-0:1.0: USB hub found [ 6.511139] hub 2-0:1.0: 4 ports detected [ 6.551916] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.557884] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.559226] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.559434] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.572558] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.573643] tegra194-cpufreq ccplex: probed with BWMGR [ 6.575107] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.575741] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.576244] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.577372] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.585497] tegra194-vi5 15c10000.vi: initialized [ 6.587137] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.588384] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.591271] generic_infoframe_type: 0x87 [ 6.597727] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.601207] tegradc 15200000.display: DT parsed successfully [ 6.609277] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.609292] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.615183] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.621369] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.628264] mmc0: CQHCI version 5.10 [ 6.629000] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.629005] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.629008] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.629372] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.629377] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.629521] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.630618] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.630622] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.632913] tegradc 15200000.display: probed [ 6.636188] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.670947] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.678956] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.722901] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.727559] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.727570] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.755037] Console: switching to colour frame buffer device 240x67 [ 6.755778] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.760811] tegradc 15200000.display: fb registered [ 6.760878] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.779170] nvethernet 2490000.ethernet: Macsec not supported [ 6.780085] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.786278] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.791202] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.800337] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.810444] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.817979] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.823833] mmc0: Command Queue Engine enabled [ 6.825477] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.828714] mmc0: periodic cache flush enabled [ 6.828728] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.836380] tegra-se-nvhost 15810000.se: initialized [ 6.840097] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.847551] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.851190] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.856054] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.871698] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.873401] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.876323] tegra-se-nvhost 15820000.se: initialized [ 6.885216] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.894053] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.897392] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.897403] random: crng init done [ 6.898065] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.905636] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.911386] Extcon AUX1(HDMI) enable [ 6.911521] tegradc 15210000.display: disp1 connected to head1->sor [ 6.919839] tegra-se-nvhost 15830000.se: initialized [ 6.922031] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.922038] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.922057] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.922215] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.922286] tegradc 15210000.display: DT parsed successfully [ 6.922334] tegradc 15210000.display: Display dc.000000006a60bb04 registered with id=1 [ 6.922449] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.922455] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.930714] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.935589] usb 1-2: Manufacturer: Generic [ 6.939836] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.952222] tegradc 15210000.display: probed [ 6.952944] hub 1-2:1.0: USB hub found [ 6.954111] hub 1-2:1.0: 4 ports detected [ 6.959630] tegra-se-nvhost 15840000.se: initialized [ 7.038136] tegradc 15210000.display: fb registered [ 7.040453] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.043745] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.046381] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.046404] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.046413] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.050477] tegra_actmon d230000.actmon: in actmon_register()... ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.082838] tegradc 15200000.display: blank - powerdown [ 7.082925] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.083278] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.083825] hvc_sysfs: hypervisor is not present [ 7.096737] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.096742] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.096746] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.096749] usb 2-3: Manufacturer: Generic [ 7.107492] hub 2-3:1.0: USB hub found [ 7.109310] hub 2-3:1.0: 4 ports detected [ 7.110390] ALSA device list: [ 7.110397] No soundcards found. [ 7.122131] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.122136] Extcon AUX1(HDMI) disable [ 7.145555] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.146396] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.157440] tegradc 15200000.display: unblank [ 7.158573] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.158765] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.164802] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.166653] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.170661] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.170665] Extcon AUX1(HDMI) enable [ 7.183424] tegradc 15200000.display: sync windows ret = 246 [ 7.198958] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.214917] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.241179] tegradc 15210000.display: blank - powerdown [ 7.246304] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.246307] Extcon DP: HPD disabled [ 7.246311] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.246329] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.269574] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.271126] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.277714] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.290444] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.291590] Freeing unused kernel memory: 3968K [ 7.297410] Extcon HDMI: HPD enabled [ 7.302048] Run /init as init process [ 7.305623] tegradc 15200000.display: hdmi: plugged [ 7.371418] Root device found: mmcblk0p1 [ 7.374988] Found dev node: /dev/mmcblk0p1 [ 7.392029] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.393517] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.395126] usb 1-3: Product: Bluetooth Radio [ 7.396469] usb 1-3: Manufacturer: Realtek [ 7.397791] usb 1-3: SerialNumber: 00e04c000001 [ 7.417301] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.422950] Rootfs mounted over mmcblk0p1 [ 7.466165] Switching from initrd to actual rootfs [ 7.609418] systemd[1]: System time before build time, advancing clock. [ 7.680161] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.685173] systemd[1]: Detected architecture arm64. [ 7.729524] systemd[1]: Set hostname to . [ 7.895202] systemd-sysv-generator[249]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.245905] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.247660] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.253347] systemd[1]: Created slice system-modprobe.slice. [ 8.258041] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.262266] systemd[1]: Created slice User and Session Slice. [ 8.265775] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.269915] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.273415] systemd[1]: Reached target User and Group Name Lookups. [ 8.276620] systemd[1]: Reached target Slices. [ 8.279732] systemd[1]: Reached target Swap. [ 8.283788] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.287492] systemd[1]: Listening on Syslog Socket. [ 8.291073] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.294537] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.298950] systemd[1]: Listening on Journal Audit Socket. [ 8.305635] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.309537] systemd[1]: Listening on Journal Socket. [ 8.313497] systemd[1]: Listening on udev Control Socket. [ 8.317145] systemd[1]: Listening on udev Kernel Socket. [ 8.325858] systemd[1]: Mounting Huge Pages File System... [ 8.334552] systemd[1]: Mounting POSIX Message Queue File System... [ 8.343038] systemd[1]: Mounting RPC Pipe File System... [ 8.351710] systemd[1]: Mounting Kernel Debug File System... [ 8.360383] systemd[1]: Mounting Kernel Trace File System... [ 8.370638] systemd[1]: Starting Journal Service... [ 8.379644] systemd[1]: Starting Set the console keyboard layout... [ 8.387983] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.391670] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.398201] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.406304] systemd[1]: Started Nameserver information manager. [ 8.413311] systemd[1]: Reached target Network (Pre). [ 8.420608] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.422435] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.429522] systemd[1]: Starting Load Kernel Modules... [ 8.437655] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.445894] systemd[1]: Starting udev Coldplug all Devices... [ 8.457294] systemd[1]: Mounted Huge Pages File System. [ 8.461124] systemd[1]: Mounted POSIX Message Queue File System. [ 8.464898] systemd[1]: Mounted RPC Pipe File System. [ 8.465329] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.471941] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.472577] systemd[1]: Mounted Kernel Debug File System. [ 8.473915] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.476571] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.476586] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.476591] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.476795] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.478385] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.484362] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.484373] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.489517] systemd[1]: Mounted Kernel Trace File System. [ 8.496447] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.501632] systemd[1]: nvfb-udev.service: Succeeded. [ 8.510185] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.523017] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.528136] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.531036] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.537331] systemd[1]: Starting Load/Save Random Seed... [ 8.545080] systemd[1]: Starting Create System Users... [ 8.588628] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.588628] [ 8.594478] systemd[1]: Finished Load/Save Random Seed. [ 8.607094] systemd[1]: Finished Create System Users. [ 8.615481] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.622504] systemd[1]: Finished Load Kernel Modules. [ 8.627570] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.634468] systemd[1]: Mounting Kernel Configuration File System... [ 8.642647] systemd[1]: Started OP-TEE Client Supplicant. [ 8.651038] systemd[1]: Starting Apply Kernel Variables... [ 8.662604] systemd[1]: Finished Set the console keyboard layout. [ 8.666838] systemd[1]: Mounted Kernel Configuration File System. [ 8.681445] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.685975] systemd[1]: Reached target Local File Systems (Pre). [ 8.689279] systemd[1]: Reached target Local File Systems. [ 8.692695] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 8.699266] systemd[1]: Starting Enable support for additional executable binary formats... [ 10.100417] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.107529] imx219 9-0010: board setup failed [ 10.108848] imx219: probe of 9-0010 failed with error -121 [ 10.120995] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.127495] imx219 10-0010: board setup failed [ 10.128795] imx219: probe of 10-0010 failed with error -121 [ 10.205272] hot-surface-alert cooling state: 0 -> 1 [ 10.884472] using random self ethernet address [ 10.898813] using random host ethernet address [ 11.874611] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.874617] Creating 1 MTD partitions on "spi6.0": [ 11.874627] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.315617] using random self ethernet address [ 12.317383] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.877663] nvidia: loading out-of-tree module taints kernel. [ 59.416766] watchdog: watchdog0: watchdog did not stop! [ 59.891947] Trying to unregister non-registered hwtime source [ 62.949763] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.951415] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] t ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuratioÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿän might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.211] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> hdmi cable connected [0003.611] W> set volts not configured for 'vdd-1v0' [0003.617] W> set volts not configured for 'vdd-1v8-hs' [0003.617] I> retrieved tmds range from prod_list_hdmi_soc [0003.624] E> invalid display type [0003.626] E> cannot find any other nvdisp nodes [0003.642] I> edid read success [0003.655] I> edid read success [0003.655] I> width = 640, height = 480, frequency = 25174825 [0003.655] I> width = 1920, height = 1080, frequency = 148500000 [0003.656] I> width = 1280, height = 768, frequency = 79500000 [0003.656] I> width = 1360, height = 768, frequency = 85500000 [0003.656] I> width = 720, height = 480, frequency = 26973026 [0003.660] I> width = 720, height = 576, frequency = 26973026 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1280, height = 720, frequency = 74175824 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 1920, height = 1080, frequency = 148351648 [0003.689] I> width = 720, height = 480, frequency = 26973026 [0003.694] I> width = 720, height = 576, frequency = 26973026 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 3840, height = 2160, frequency = 296703296 [0003.723] I> width = 4096, height = 2160, frequency = 296703296 [0003.729] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.740] I> hdmi_enable, starting HDMI initialisation [0003.745] I> hdmi_enable, HDMI initialisation complete [0003.754] initializing target [0003.754] calling apps_init() [0003.755] starting app kernel_boot_app [0003.756] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000727] Console: colour dummy device 80x25 [ 0.002267] printk: console [tty0] enabled [ 0.002330] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002386] pid_max: default: 32768 minimum: 301 [ 0.002599] LSM: Security Framework initializing [ 0.002657] Yama: becoming mindful. [ 0.002702] SELinux: Initializing. [ 0.002884] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002941] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006012] rcu: Hierarchical SRCU implementation. [ 0.006275] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007152] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007190] DTB Build time: Aug 10 2022 20:31:49 [ 0.010505] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010745] Remapping and enabling EFI services. [ 0.013543] smp: Bringing up secondary CPUs ... [ 0.042940] Detected PIPT I-cache on CPU1 [ 0.043002] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073282] Detected PIPT I-cache on CPU2 [ 0.073382] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102971] Detected PIPT I-cache on CPU3 [ 0.103037] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132759] Detected PIPT I-cache on CPU4 [ 0.132838] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162422] Detected PIPT I-cache on CPU5 [ 0.162492] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162888] smp: Brought up 1 node, 6 CPUs [ 0.163102] SMP: Total of 6 processors activated. [ 0.163140] CPU features: detected: Privileged Access Never [ 0.163155] CPU features: detected: LSE atomic instructions [ 0.163168] CPU features: detected: User Access Override [ 0.163181] CPU features: detected: 32-bit EL0 Support [ 0.163209] CPU features: detected: RAS Extension Support [ 0.163222] CPU features: detected: CRC32 instructions [ 0.163235] CPU features: detected: 32-bit EL1 Support [ 0.237745] CPU: All CPU(s) started at EL2 [ 0.243231] devtmpfs: initialized [ 0.297189] Registered cp15_barrier emulation handler [ 0.297306] Registered setend emulation handler [ 0.297327] KASLR enabled [ 0.297631] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.297682] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.299121] pinctrl core: initialized pinctrl subsystem [ 0.300084] SMBIOS 3.0.0 present. [ 0.300114] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.300762] NET: Registered protocol family 16 [ 0.302691] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.303183] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.303889] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.303986] audit: initializing netlink subsys (disabled) [ 0.304347] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.304699] thermal_sys: Registered thermal governor 'step_wise' [ 0.304705] thermal_sys: Registered thermal governor 'power_allocator' [ 0.304719] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.306865] cpuidle: using governor menu [ 0.307131] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.307613] ASID allocator initialised with 32768 entries [ 0.307878] Serial: AMBA PL011 UART driver [ 0.311012] Tegra reboot handler registered. [ 0.375413] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375562] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.375781] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.375826] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.375956] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.375996] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.376120] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.376160] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376327] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376383] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.378778] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.378853] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.378887] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.378936] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.378989] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.379018] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.379054] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.379085] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.379110] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.379133] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.379157] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.379181] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.379204] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.379228] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.379251] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.379275] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.379299] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.379392] mc-err: mcerr ops are set to t19x [ 0.390958] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390981] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390994] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391006] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397137] ACPI: Interpreter disabled. [ 0.398367] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.399605] iommu: Default domain type: Translated [ 0.399688] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400057] SCSI subsystem initialized [ 0.400238] usbcore: registered new interface driver usbfs [ 0.400294] usbcore: registered new interface driver hub [ 0.400330] usbcore: registered new device driver usb [ 0.400698] mc: Linux media interface: v0.10 [ 0.400729] videodev: Linux video capture interface: v2.00 [ 0.401018] pps_core: LinuxPPS API ver. 1 registered [ 0.401030] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401051] PTP clock support registered [ 0.401250] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.401593] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401692] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.402247] Registered efivars operations [ 0.407917] FPGA manager framework [ 0.408018] Advanced Linux Sound Architecture Driver Initialized. [ 0.408614] Bluetooth: Core ver 2.22 [ 0.408652] NET: Registered protocol family 31 [ 0.408663] Bluetooth: HCI device and connection manager initialized [ 0.408679] Bluetooth: HCI socket layer initialized [ 0.408694] Bluetooth: L2CAP socket layer initialized [ 0.408716] Bluetooth: SCO socket layer initialized [ 0.410230] camchar: rtcpu character device driver loaded [ 0.410865] clocksource: Switched to clocksource arch_sys_counter [ 0.690354] VFS: Disk quotas dquot_6.6.0 [ 0.690437] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.690811] pnp: PnP ACPI: disabled [ 0.702790] la/ptsa driver initialized. [ 0.702951] NET: Registered protocol family 2 [ 0.703107] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.708307] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.708421] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.708668] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.709105] TCP: Hash tables configured (established 65536 bind 65536) [ 0.709240] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.709330] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.709550] NET: Registered protocol family 1 [ 0.710488] RPC: Registered named UNIX socket transport module. [ 0.710521] RPC: Registered udp transport module. [ 0.710536] RPC: Registered tcp transport module. [ 0.710579] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.710605] PCI: CLS 0 bytes, default 64 [ 0.710950] Trying to unpack rootfs image as initramfs... [ 0.973464] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.976562] Freeing initrd memory: 8196K [ 0.980748] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.980784] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.980830] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.981161] kvm [1]: IPA Size Limit: 40 bits [ 0.981670] kvm [1]: vgic interrupt IRQ9 [ 0.982163] kvm [1]: VHE mode initialized successfully [ 0.983661] Initialise system trusted keyrings [ 0.983958] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.990935] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.991905] NFS: Registering the id_resolver key type [ 0.991941] Key type id_resolver registered [ 0.991956] Key type id_legacy registered [ 0.992056] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.992081] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.992123] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.002424] NET: Registered protocol family 38 [ 1.002448] Key type asymmetric registered [ 1.002464] Asymmetric key parser 'x509' registered [ 1.002515] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.002782] io scheduler mq-deadline registered [ 1.002802] io scheduler kyber registered [ 1.008535] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.011413] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.011495] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.011601] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.011701] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.011802] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.017061] scrncapt: init (heads:4 wins:6 planes:4) [ 1.017431] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.018567] EINJ: ACPI disabled. [ 1.022392] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.022424] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.022440] tegra-pmc: ### PMC reset level: L1 [ 1.022455] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.022544] tegra-pmc: PMC Prod config success [ 1.027867] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.035985] random: fast init done [ 1.045429] printk: console [ttyTCU0] enabled [ 2.586291] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.590405] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.595020] arm-smmu 10000000.iommu: stage 1 translation [ 2.600685] arm-smmu 10000000.iommu: stage 2 translation [ 2.605926] arm-smmu 10000000.iommu: nested translation [ 2.611522] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.618696] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.629239] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.631821] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.638153] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.646200] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.651420] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.656172] arm-smmu 12000000.iommu: stage 1 translation [ 2.661676] arm-smmu 12000000.iommu: stage 2 translation [ 2.666843] arm-smmu 12000000.iommu: nested translation [ 2.672518] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.679685] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.690002] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.692550] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.699372] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.706485] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.717024] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.719777] tegra_profiler: auth: init [ 2.724033] THERMAL EST: found 3 subdevs [ 2.727210] THERMAL EST num_resources: 0 [ 2.731315] [THERMAL EST subdev 0] [ 2.734354] [THERMAL EST subdev 1] [ 2.738048] [THERMAL EST subdev 2] [ 2.741065] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.747781] THERMAL EST: thz register success. [ 2.751988] THERMAL EST: end of probe, return err: 0 [ 2.757043] nvsciipc: loaded module [ 2.764375] tun: Universal TUN/TAP device driver, 1.6 [ 2.766700] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.773051] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.778373] e1000e: Intel(R) PRO/1000 Network Driver [ 2.783570] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.789417] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.794921] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.801226] PPP generic driver version 2.4.2 [ 2.805120] PPP BSD Compression module registered [ 2.809901] PPP Deflate Compression module registered [ 2.815144] PPP MPPE Compression module registered [ 2.819939] usbcore: registered new interface driver r8152 [ 2.825700] usbcore: registered new interface driver asix [ 2.830744] usbcore: registered new interface driver ax88179_178a [ 2.836894] usbcore: registered new interface driver cdc_ether [ 2.842819] usbcore: registered new interface driver net1080 [ 2.848412] usbcore: registered new interface driver cdc_subset [ 2.854713] usbcore: registered new interface driver zaurus [ 2.860412] usbcore: registered new interface driver cdc_ncm [ 2.866084] usbcore: registered new interface driver aqc111 [ 2.871800] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.877589] ohci-pci: OHCI PCI platform driver [ 2.882131] ohci-platform: OHCI generic platform driver [ 2.887935] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.894039] usbcore: registered new interface driver uas [ 2.898179] usbcore: registered new interface driver usb-storage [ 2.904293] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.910321] mousedev: PS/2 mouse device common for all mice [ 2.915554] usbcore: registered new interface driver xpad [ 2.923601] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.926285] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.934085] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.940480] i2c /dev entries driver [ 2.943983] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.949802] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.955234] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.960484] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.965531] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.971340] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.976793] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.990140] device-mapper: uevent: version 1.0.3 [ 2.990564] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.997314] cpuidle: Initializing cpuidle driver [ 3.000833] sdhci: Secure Digital Host Controller Interface driver [ 3.005643] sdhci: Copyright(c) Pierre Ossman [ 3.009995] Synopsys Designware Multimedia Card Interface Driver [ 3.015930] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.022182] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.023020] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.035404] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.057262] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.067078] vdd-1v0: supplied by regulator-dummy [ 3.072545] vdd-1v8-hs: supplied by regulator-dummy [ 3.077413] vdd-1v8-ls: supplied by regulator-dummy [ 3.082242] vdd-1v8-ao: supplied by regulator-dummy [ 3.086303] vddio-ddr-1v1: supplied by regulator-dummy [ 3.090803] vdd-rtc: supplied by regulator-dummy [ 3.092705] spmic-ldo1: supplied by regulator-dummy [ 3.093962] vdd-ao-3v3: supplied by regulator-dummy [ 3.100166] vddio-emmc-3v3: supplied by regulator-dummy [ 3.106494] spmic-ldo4: supplied by regulator-dummy [ 3.107784] vdd-usb-3v3: supplied by regulator-dummy [ 3.114043] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.120250] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.125825] spmic-ldo8: supplied by vdd-1v8-ls [ 3.127361] gpio-510 (gpio_default): hogged as output/high [ 3.128742] gpio-511 (gpio_default): hogged as output/high [ 3.131642] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.268546] max77686-rtc max77620-rtc: registered as rtc0 [ 3.269926] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.270266] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.096840] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.098121] hid: raw HID events driver (C) Jiri Kosina [ 4.099060] usbcore: registered new interface driver usbhid [ 4.099237] usbhid: USB HID core driver [ 4.101339] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.102710] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.161540] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.235788] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 75.058 ms) ÿá[ 4.187384] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.188062] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.189176] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.189950] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.191802] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.192484] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.193112] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.194510] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.194825] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.196827] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.203306] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.209586] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.214329] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.220693] denver_knobs_init:MTS_VERSION:55637613 [ 4.234024] t19x_cache tegra-cache: probed [ 4.238587] optee: probing for conduit method. [ 4.239536] optee: revision 3.16 (65cc2218) [ 4.240489] optee: dynamic shared memory is enabled [ 4.241780] optee: initialized driver [ 4.248097] nvpmodel: initialized successfully [ 4.249131] tegra_hv: get_hvd: not initialized yet [ 4.253908] user_ivc_mempool: hypervisor not present [ 4.260191] usbcore: registered new interface driver snd-usb-audio [ 4.266393] u32 classifier [ 4.267659] input device check on [ 4.271420] Actions configured [ 4.275287] Initializing XFRM netlink socket [ 4.280138] NET: Registered protocol family 10 [ 4.286482] Segment Routing with IPv6 [ 4.287532] NET: Registered protocol family 17 [ 4.291494] NET: Registered protocol family 15 [ 4.296169] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.309764] Bluetooth: RFCOMM socket layer initialized [ 4.314430] Bluetooth: RFCOMM ver 1.11 [ 4.318071] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.324184] Bluetooth: HIDP socket layer initialized [ 4.329863] 9pnet: Installing 9P2000 support [ 4.333415] Key type dns_resolver registered [ 4.338991] registered taskstats version 1 [ 4.342029] Loading compiled-in X.509 certificates [ 4.355018] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.357736] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.367914] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.369722] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.378582] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.386674] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.502937] tegra194-pcie 14160000.pcie: Link up [ 4.505914] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.506102] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.506249] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.506580] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.506935] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.507315] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.507800] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.523318] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.523816] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.524319] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.525825] pci 0004:01:00.0: supports D1 D2 [ 4.526060] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.542804] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.543358] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.543655] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.544091] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.544342] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.544581] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.544828] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.545125] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.553432] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.563820] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.568511] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.573929] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.581322] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.590338] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.591599] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.599825] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.608517] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.723564] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.724153] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.724382] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.724523] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.724734] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.724911] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.725298] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.725825] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.747461] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.747728] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.749327] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.750403] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.752079] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.753641] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.754638] pci 0005:00:00.0: Removing from iommu group 7 [ 5.755022] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.793557] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.820507] host1x 13e10000.host1x: initialized [ 5.822290] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.823279] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.824490] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.825331] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.826644] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.827441] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.828545] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.829224] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.830293] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.831083] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.833762] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.840482] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.850584] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.857643] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.867603] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.874397] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.884703] falcon 15340000.vic: Adding to iommu group 17 [ 5.898806] falcon 15340000.vic: initialized [ 5.900092] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.905581] falcon 15380000.nvjpg: initialized [ 5.906205] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.918014] falcon 154c0000.nvenc: initialized [ 5.918656] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.927590] falcon 15a80000.nvenc1: initialized [ 5.928183] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.941441] nvdec 15480000.nvdec: initialized [ 5.942018] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.952500] nvdec 15140000.nvdec1: initialized [ 5.953163] tsec 15500000.tsec: Adding to iommu group 18 [ 5.958599] tsec 15500000.tsec: initialized [ 5.959165] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.964775] tsec 15100000.tsecb: initialized [ 5.968833] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.009978] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.024584] gpio-374 (wifi-enable): hogged as output/high [ 6.024922] gpio-431 (camera-control-output-low): hogged as output/low [ 6.025236] gpio-432 (camera-control-output-low): hogged as output/low [ 6.027025] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.029097] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.029566] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.031032] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.032392] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.033751] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.035308] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.040839] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.048088] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.059825] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.064693] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.070570] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.079694] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.088652] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.095786] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.103741] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.109752] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.119649] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.125866] pva 16000000.pva0: Adding to iommu group 22 [ 6.155150] pva 16000000.pva0: initialized [ 6.159634] pva 16800000.pva1: Adding to iommu group 23 [ 6.171309] pva 16800000.pva1: initialized [ 6.175824] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.189493] nvdla 15880000.nvdla0: initialized [ 6.190929] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.200564] nvdla 158c0000.nvdla1: initialized [ 6.205748] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.206017] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.206177] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.206831] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.207337] tegradccommon 15200000.display-hub: dma mapping done [ 6.207405] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.209084] tegradc 15210000.display: Adding to iommu group 26 [ 6.209114] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.209199] tegradc 15200000.display: Adding to iommu group 26 [ 6.217582] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.221698] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.227599] generic_infoframe_type: 0x87 [ 6.233222] tegra_cec 3960000.tegra_cec: probed [ 6.237500] tegradc 15200000.display: DT parsed successfully [ 6.243302] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.247883] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.264251] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.265504] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.268822] kfuse 3830000.kfuse: initialized [ 6.276536] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.276542] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.277283] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.281491] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.288891] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.290260] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.297101] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.297869] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.306283] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.326851] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.333755] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.340743] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.348238] tegradc 15210000.display: disp0 connected to head1->sor [ 6.355671] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.361927] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.369001] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.374519] tegradc 15210000.display: DT parsed successfully [ 6.383623] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.390219] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.430439] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.430756] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.433420] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.434467] random: crng init done [ 6.441900] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.453792] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.460386] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.467849] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.475391] usb usb1: Product: xHCI Host Controller [ 6.479906] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.486168] usb usb1: SerialNumber: 3610000.xhci [ 6.492006] hub 1-0:1.0: USB hub found [ 6.495025] hub 1-0:1.0: 4 ports detected [ 6.499929] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.504505] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.511844] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.519674] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.527421] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.534659] usb usb2: Product: xHCI Host Controller [ 6.539902] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.546128] usb usb2: SerialNumber: 3610000.xhci [ 6.551585] hub 2-0:1.0: USB hub found [ 6.554556] hub 2-0:1.0: 4 ports detected [ 6.598721] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.605228] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.606818] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.607037] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.620376] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.621461] tegra194-cpufreq ccplex: probed with BWMGR [ 6.622704] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.623272] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.623726] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.624875] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.632521] tegra194-vi5 15c10000.vi: initialized [ 6.633500] mmc0: CQHCI version 5.10 [ 6.633764] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.638919] generic_infoframe_type: 0x87 [ 6.639586] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.642281] tegradc 15200000.display: DT parsed successfully [ 6.648794] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.654114] tegradc 15200000.display: Display dc.00000000a1f49001 registered with id=0 [ 6.661990] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.676793] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.683362] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.689972] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.696581] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.702944] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.704659] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.709441] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.711065] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.719435] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.733740] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.741656] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.747965] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.748225] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.756027] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.758899] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.762134] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.779516] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.786289] nvethernet 2490000.ethernet: Macsec not supported [ 6.787677] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.796452] tegradc 15200000.display: probed [ 6.802373] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.825156] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.832703] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.840776] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.847248] tegra-se-nvhost 15810000.se: initialized [ 6.855666] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.856527] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.860501] mmc0: Command Queue Engine enabled [ 6.863970] tegra-se-nvhost 15820000.se: initialized [ 6.867065] mmc0: periodic cache flush enabled [ 6.867082] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.873800] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.877256] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.883558] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.889167] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.907780] Console: switching to colour frame buffer device 240x67 [ 6.908073] tegra-se-nvhost 15830000.se: initialized [ 6.913530] tegradc 15200000.display: fb registered [ 6.913603] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.918895] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.919662] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.920184] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.920836] tegra-se-nvhost 15840000.se: initialized [ 6.922324] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.923870] tegra_actmon d230000.actmon: in actmon_register()... [ 6.924306] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.924543] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.926573] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.926580] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.926585] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.926588] usb 1-2: Manufacturer: Generic [ 6.928784] hub 1-2:1.0: USB hub found [ 6.943448] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.950921] hub 1-2:1.0: 4 ports detected [ 6.960494] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.983007] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.987237] hvc_sysfs: hypervisor is not present [ 6.995151] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.025500] ALSA device list: [ 7.033158] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.037596] No soundcards found. [ 7.043722] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.046563] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.074543] Extcon AUX1(HDMI) enable [ 7.078079] tegradc 15210000.display: disp1 connected to head1->sor [ 7.084385] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.091576] tegradc 15210000.display: DT parsed successfully [ 7.092497] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.097040] tegradc 15210000.display: Display dc.000000007dc2a8f1 registered with id=1 [ 7.105488] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.105494] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.105498] usb 2-3: Manufacturer: Generic [ 7.116408] hub 2-3:1.0: USB hub found [ 7.120853] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.127443] hub 2-3:1.0: 4 ports detected [ 7.129292] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.156831] tegradc 15210000.display: probed [ 7.157142] tegradc 15210000.display: fb registered [ 7.162690] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.166832] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.168711] Freeing unused kernel memory: 3968K [ 7.174542] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.184619] tegradc 15210000.display: blank - powerdown [ 7.189417] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.191110] Run /init as init process [ 7.197629] Extcon DP: HPD disabled [ 7.197634] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.197643] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.205065] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.210890] usb 1-3: new full-speed USB device number 3 using tegra-xusb ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.231028] tegradc 15200000.display: blank - powerdown [ 7.262943] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.266823] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.266828] Extcon AUX1(HDMI) disable [ 7.290123] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.290982] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.302350] tegradc 15200000.display: unblank [ 7.303386] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.303571] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.309251] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.311076] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.315023] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.315027] Extcon AUX1(HDMI) enable [ 7.327497] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.327503] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.327869] tegradc 15200000.display: sync windows ret = 247 [ 7.356361] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.357827] Extcon HDMI: HPD enabled [ 7.359239] tegradc 15200000.display: hdmi: plugged [ 7.368084] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.369583] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.371045] usb 1-3: Product: Bluetooth Radio [ 7.372370] usb 1-3: Manufacturer: Realtek [ 7.374314] usb 1-3: SerialNumber: 00e04c000001 [ 7.407267] Root device found: mmcblk0p1 [ 7.410733] Found dev node: /dev/mmcblk0p1 [ 7.447793] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.453315] Rootfs mounted over mmcblk0p1 [ 7.489753] Switching from initrd to actual rootfs [ 7.638605] systemd[1]: System time before build time, advancing clock. [ 7.710122] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.715046] systemd[1]: Detected architecture arm64. [ 7.749484] systemd[1]: Set hostname to . [ 7.912855] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.267797] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.270835] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.277084] systemd[1]: Created slice system-modprobe.slice. [ 8.281953] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.286093] systemd[1]: Created slice User and Session Slice. [ 8.289464] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.293671] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.297091] systemd[1]: Reached target User and Group Name Lookups. [ 8.300179] systemd[1]: Reached target Slices. [ 8.303289] systemd[1]: Reached target Swap. [ 8.307200] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.310646] systemd[1]: Listening on Syslog Socket. [ 8.314147] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.317416] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.321542] systemd[1]: Listening on Journal Audit Socket. [ 8.326610] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.331849] systemd[1]: Listening on Journal Socket. [ 8.335396] systemd[1]: Listening on udev Control Socket. [ 8.338746] systemd[1]: Listening on udev Kernel Socket. [ 8.347266] systemd[1]: Mounting Huge Pages File System... [ 8.355479] systemd[1]: Mounting POSIX Message Queue File System... [ 8.363765] systemd[1]: Mounting RPC Pipe File System... [ 8.372440] systemd[1]: Mounting Kernel Debug File System... [ 8.380918] systemd[1]: Mounting Kernel Trace File System... [ 8.391188] systemd[1]: Starting Journal Service... [ 8.400361] systemd[1]: Starting Set the console keyboard layout... [ 8.408677] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.412283] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.418848] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.427174] systemd[1]: Started Nameserver information manager. [ 8.435593] systemd[1]: Reached target Network (Pre). [ 8.443362] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.443553] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.452608] systemd[1]: Starting Load Kernel Modules... [ 8.460432] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.468456] systemd[1]: Starting udev Coldplug all Devices... [ 8.479806] systemd[1]: Mounted Huge Pages File System. [ 8.483400] systemd[1]: Mounted POSIX Message Queue File System. [ 8.486921] systemd[1]: Mounted RPC Pipe File System. [ 8.490355] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.490517] systemd[1]: Mounted Kernel Debug File System. [ 8.492409] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.496658] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.496666] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.496682] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.496686] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.496871] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.497105] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.505846] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.507376] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.508845] systemd[1]: Mounted Kernel Trace File System. [ 8.516320] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.523425] systemd[1]: nvfb-udev.service: Succeeded. [ 8.528536] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.541005] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.546106] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.548454] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.562832] systemd[1]: Starting Load/Save Random Seed... [ 8.571986] systemd[1]: Starting Create System Users... [ 8.609114] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.609114] [ 8.622793] systemd[1]: Finished Load/Save Random Seed. [ 8.629880] systemd[1]: Finished Create System Users. [ 8.639191] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.646416] systemd[1]: Finished Load Kernel Modules. [ 8.650757] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.657276] systemd[1]: Mounting Kernel Configuration File System... [ 8.667566] systemd[1]: Started OP-TEE Client Supplicant. [ 8.677147] systemd[1]: Starting Apply Kernel Variables... [ 8.688806] systemd[1]: Finished Set the console keyboard layout. [ 8.693406] systemd[1]: Mounted Kernel Configuration File System. [ 8.708003] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.712107] systemd[1]: Reached target Local File Systems (Pre). [ 10.079065] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.087005] imx219 9-0010: board setup failed [ 10.088326] imx219: probe of 9-0010 failed with error -121 [ 10.111236] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.118439] imx219 10-0010: board setup failed [ 10.120446] imx219: probe of 10-0010 failed with error -121 [ 10.123224] hot-surface-alert cooling state: 0 -> 1 [ 11.185602] using random self ethernet address [ 11.187236] using random host ethernet address [ 11.640771] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.642576] Creating 1 MTD partitions on "spi6.0": [ 11.644273] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.540549] using random self ethernet address [ 12.542092] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.845144] nvidia: loading out-of-tree module taints kernel. [ 59.604902] watchdog: watchdog0: watchdog did not stop! [ 60.123499] Trying to unregister non-registered hwtime source [ 63.181463] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.182844] nvgpu: 17000000.gv11b gp10b_gr_init_wait_emptùÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: Thÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäis OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.609] W> set volts not configured for 'vdd-1v0' [0003.614] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.650] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.750] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000786] Console: colour dummy device 80x25 [ 0.002203] printk: console [tty0] enabled [ 0.002265] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002301] pid_max: default: 32768 minimum: 301 [ 0.002472] LSM: Security Framework initializing [ 0.002535] Yama: becoming mindful. [ 0.002581] SELinux: Initializing. [ 0.002740] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002779] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005720] rcu: Hierarchical SRCU implementation. [ 0.006037] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007143] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007197] DTB Build time: Aug 10 2022 20:31:49 [ 0.010973] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011335] Remapping and enabling EFI services. [ 0.013437] smp: Bringing up secondary CPUs ... [ 0.045118] Detected PIPT I-cache on CPU1 [ 0.045218] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074711] Detected PIPT I-cache on CPU2 [ 0.074854] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104505] Detected PIPT I-cache on CPU3 [ 0.104592] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134365] Detected PIPT I-cache on CPU4 [ 0.134528] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164281] Detected PIPT I-cache on CPU5 [ 0.164433] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164763] smp: Brought up 1 node, 6 CPUs [ 0.164963] SMP: Total of 6 processors activated. [ 0.165082] CPU features: detected: Privileged Access Never [ 0.165105] CPU features: detected: LSE atomic instructions [ 0.165120] CPU features: detected: User Access Override [ 0.165133] CPU features: detected: 32-bit EL0 Support [ 0.165146] CPU features: detected: RAS Extension Support [ 0.165159] CPU features: detected: CRC32 instructions [ 0.165172] CPU features: detected: 32-bit EL1 Support [ 0.238869] CPU: All CPU(s) started at EL2 [ 0.244574] devtmpfs: initialized [ 0.292339] Registered cp15_barrier emulation handler [ 0.292439] Registered setend emulation handler [ 0.292462] KASLR enabled [ 0.292718] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.292746] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.294107] pinctrl core: initialized pinctrl subsystem [ 0.295144] SMBIOS 3.0.0 present. [ 0.295191] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.295810] NET: Registered protocol family 16 [ 0.297731] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.298260] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.298962] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.299030] audit: initializing netlink subsys (disabled) [ 0.299342] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.299743] thermal_sys: Registered thermal governor 'step_wise' [ 0.299752] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299770] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.301978] cpuidle: using governor menu [ 0.302316] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.302790] ASID allocator initialised with 32768 entries [ 0.302998] Serial: AMBA PL011 UART driver [ 0.307949] Tegra reboot handler registered. [ 0.381151] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.381283] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.381461] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.381515] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.381637] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.381680] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.381818] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.381864] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.381982] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.382023] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.384771] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.384806] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.384833] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.384877] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.384908] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.384950] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.384975] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.385013] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.385039] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.385066] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.385090] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.385114] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.385138] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.385161] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.385187] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.385210] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.385234] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.385320] mc-err: mcerr ops are set to t19x [ 0.398114] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.398137] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.398150] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.398162] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.404171] ACPI: Interpreter disabled. [ 0.405480] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.406912] iommu: Default domain type: Translated [ 0.406992] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.407374] SCSI subsystem initialized [ 0.407527] usbcore: registered new interface driver usbfs [ 0.407567] usbcore: registered new interface driver hub [ 0.407599] usbcore: registered new device driver usb [ 0.408052] mc: Linux media interface: v0.10 [ 0.408084] videodev: Linux video capture interface: v2.00 [ 0.408435] pps_core: LinuxPPS API ver. 1 registered [ 0.408447] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.408468] PTP clock support registered [ 0.408692] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.409051] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.409155] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.409919] Registered efivars operations [ 0.415485] FPGA manager framework [ 0.415595] Advanced Linux Sound Architecture Driver Initialized. [ 0.416173] Bluetooth: Core ver 2.22 [ 0.416213] NET: Registered protocol family 31 [ 0.416224] Bluetooth: HCI device and connection manager initialized [ 0.416239] Bluetooth: HCI socket layer initialized [ 0.416254] Bluetooth: L2CAP socket layer initialized [ 0.416274] Bluetooth: SCO socket layer initialized [ 0.417980] camchar: rtcpu character device driver loaded [ 0.418848] clocksource: Switched to clocksource arch_sys_counter [ 0.768756] VFS: Disk quotas dquot_6.6.0 [ 0.768824] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.769143] pnp: PnP ACPI: disabled [ 0.781211] la/ptsa driver initialized. [ 0.781357] NET: Registered protocol family 2 [ 0.781528] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.787547] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.787617] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.787926] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.788353] TCP: Hash tables configured (established 65536 bind 65536) [ 0.788470] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.788564] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.788743] NET: Registered protocol family 1 [ 0.789517] RPC: Registered named UNIX socket transport module. [ 0.789550] RPC: Registered udp transport module. [ 0.789564] RPC: Registered tcp transport module. [ 0.789578] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.789614] PCI: CLS 0 bytes, default 64 [ 0.789894] Trying to unpack rootfs image as initramfs... [ 1.064396] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.067582] Freeing initrd memory: 8196K [ 1.072642] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.072674] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.072707] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.073140] kvm [1]: IPA Size Limit: 40 bits [ 1.073807] kvm [1]: vgic interrupt IRQ9 [ 1.074331] kvm [1]: VHE mode initialized successfully [ 1.076326] Initialise system trusted keyrings [ 1.076715] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.083660] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.084509] NFS: Registering the id_resolver key type [ 1.084548] Key type id_resolver registered [ 1.084563] Key type id_legacy registered [ 1.084650] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.084701] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.084750] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.096333] NET: Registered protocol family 38 [ 1.096360] Key type asymmetric registered [ 1.096375] Asymmetric key parser 'x509' registered [ 1.096430] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.096698] io scheduler mq-deadline registered [ 1.096715] io scheduler kyber registered [ 1.103328] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.106321] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.106450] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.106562] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.106661] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.106743] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.112510] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.112538] scrncapt: init (heads:4 wins:6 planes:4) [ 1.113668] EINJ: ACPI disabled. [ 1.117012] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.117037] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.117050] tegra-pmc: ### PMC reset level: L1 [ 1.117064] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.117110] tegra-pmc: PMC Prod config success [ 1.122669] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.142459] random: fast init done [ 1.150856] printk: console [ttyTCU0] enabled [ 2.681129] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.684648] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.689267] arm-smmu 10000000.iommu: stage 1 translation [ 2.694996] arm-smmu 10000000.iommu: stage 2 translation [ 2.700181] arm-smmu 10000000.iommu: nested translation [ 2.705754] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.712951] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.724681] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.726008] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.732341] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.740391] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.745631] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.750355] arm-smmu 12000000.iommu: stage 1 translation [ 2.755607] arm-smmu 12000000.iommu: stage 2 translation [ 2.761036] arm-smmu 12000000.iommu: nested translation [ 2.766462] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.773671] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.785593] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.786740] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.793584] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.800830] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.810672] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.814042] tegra_profiler: auth: init [ 2.818271] THERMAL EST: found 3 subdevs [ 2.821419] THERMAL EST num_resources: 0 [ 2.825547] [THERMAL EST subdev 0] [ 2.828583] [THERMAL EST subdev 1] [ 2.831995] [THERMAL EST subdev 2] [ 2.835242] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.842024] THERMAL EST: thz register success. [ 2.846212] THERMAL EST: end of probe, return err: 0 [ 2.851320] nvsciipc: loaded module [ 2.859074] tun: Universal TUN/TAP device driver, 1.6 [ 2.860854] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.867020] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.872925] e1000e: Intel(R) PRO/1000 Network Driver [ 2.877760] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.883853] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.888872] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.895315] PPP generic driver version 2.4.2 [ 2.899316] PPP BSD Compression module registered [ 2.903858] PPP Deflate Compression module registered [ 2.909355] PPP MPPE Compression module registered [ 2.914401] usbcore: registered new interface driver r8152 [ 2.919625] usbcore: registered new interface driver asix [ 2.925227] usbcore: registered new interface driver ax88179_178a [ 2.931080] usbcore: registered new interface driver cdc_ether [ 2.937050] usbcore: registered new interface driver net1080 [ 2.942636] usbcore: registered new interface driver cdc_subset [ 2.948710] usbcore: registered new interface driver zaurus [ 2.954373] usbcore: registered new interface driver cdc_ncm [ 2.960045] usbcore: registered new interface driver aqc111 [ 2.965788] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.971789] ohci-pci: OHCI PCI platform driver [ 2.976084] ohci-platform: OHCI generic platform driver [ 2.982234] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.988488] usbcore: registered new interface driver uas [ 2.992621] usbcore: registered new interface driver usb-storage [ 2.998517] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.004599] mousedev: PS/2 mouse device common for all mice [ 3.009507] usbcore: registered new interface driver xpad [ 3.017569] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.020553] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.028322] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.034670] i2c /dev entries driver [ 3.038227] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.044042] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.049247] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.054500] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.060387] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.065427] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.071073] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.086982] device-mapper: uevent: version 1.0.3 [ 3.087514] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.091571] cpuidle: Initializing cpuidle driver [ 3.095505] sdhci: Secure Digital Host Controller Interface driver [ 3.099848] sdhci: Copyright(c) Pierre Ossman [ 3.104201] Synopsys Designware Multimedia Card Interface Driver [ 3.110142] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.116080] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.116768] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.129543] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.147993] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.157240] vdd-1v0: supplied by regulator-dummy [ 3.162683] vdd-1v8-hs: supplied by regulator-dummy [ 3.167541] vdd-1v8-ls: supplied by regulator-dummy [ 3.172311] vdd-1v8-ao: supplied by regulator-dummy [ 3.176248] vddio-ddr-1v1: supplied by regulator-dummy [ 3.180651] vdd-rtc: supplied by regulator-dummy [ 3.182424] spmic-ldo1: supplied by regulator-dummy [ 3.183610] vdd-ao-3v3: supplied by regulator-dummy [ 3.189824] vddio-emmc-3v3: supplied by regulator-dummy [ 3.196159] spmic-ldo4: supplied by regulator-dummy [ 3.197379] vdd-usb-3v3: supplied by regulator-dummy [ 3.203556] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.209708] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.215213] spmic-ldo8: supplied by vdd-1v8-ls [ 3.216586] gpio-510 (gpio_default): hogged as output/high [ 3.217859] gpio-511 (gpio_default): hogged as output/high [ 3.223089] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.362151] max77686-rtc max77620-rtc: registered as rtc0 [ 3.363191] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.363464] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.117605] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.118699] hid: raw HID events driver (C) Jiri Kosina [ 4.119426] usbcore: registered new interface driver usbhid [ 4.119556] usbhid: USB HID core driver [ 4.121868] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.123110] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.138020] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.212696] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.485 ms) ÿá[ 4.207756] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.208434] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.209945] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.211223] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.213168] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.213958] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.214615] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.216370] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.216741] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.219029] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.223936] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.230042] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.235552] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.242598] denver_knobs_init:MTS_VERSION:55637613 [ 4.255567] t19x_cache tegra-cache: probed [ 4.258767] optee: probing for conduit method. [ 4.259701] optee: revision 3.16 (65cc2218) [ 4.260723] optee: dynamic shared memory is enabled [ 4.262210] optee: initialized driver [ 4.268529] nvpmodel: initialized successfully [ 4.269876] tegra_hv: get_hvd: not initialized yet [ 4.274937] user_ivc_mempool: hypervisor not present [ 4.281017] usbcore: registered new interface driver snd-usb-audio [ 4.287273] u32 classifier [ 4.288628] input device check on [ 4.292357] Actions configured [ 4.295969] Initializing XFRM netlink socket [ 4.300924] NET: Registered protocol family 10 [ 4.308611] Segment Routing with IPv6 [ 4.308938] NET: Registered protocol family 17 [ 4.312275] NET: Registered protocol family 15 [ 4.316929] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.330468] Bluetooth: RFCOMM socket layer initialized [ 4.335294] Bluetooth: RFCOMM ver 1.11 [ 4.338841] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.344993] Bluetooth: HIDP socket layer initialized [ 4.350627] 9pnet: Installing 9P2000 support [ 4.354390] Key type dns_resolver registered [ 4.359736] registered taskstats version 1 [ 4.362769] Loading compiled-in X.509 certificates [ 4.376279] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.378699] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.388944] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.390724] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.399124] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.407689] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.522973] tegra194-pcie 14160000.pcie: Link up [ 4.525979] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.526217] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.526427] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.526668] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.526931] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.527306] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.527834] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.540817] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.541364] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.541809] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.543524] pci 0004:01:00.0: supports D1 D2 [ 4.543741] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.555327] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.555672] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.555997] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.556428] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.556708] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.556938] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.557469] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.564992] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.573485] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.583852] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.588270] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.594401] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.601128] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.610058] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.611449] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.620182] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.628308] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.743753] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.744317] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.744537] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.744705] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.745004] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.745294] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.745678] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.746174] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.768798] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.769210] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.771424] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.772911] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.774686] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.776706] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.777697] pci 0005:00:00.0: Removing from iommu group 7 [ 5.778117] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.813997] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.838745] host1x 13e10000.host1x: initialized [ 5.840651] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.841785] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.843125] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.843853] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.844843] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.845508] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.846524] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.847289] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.848300] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.848972] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.853750] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.860784] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.871097] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.877755] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.887976] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.894490] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.904685] falcon 15340000.vic: Adding to iommu group 17 [ 5.920426] falcon 15340000.vic: initialized [ 5.921709] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.927293] falcon 15380000.nvjpg: initialized [ 5.927912] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.937193] falcon 154c0000.nvenc: initialized [ 5.937848] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.948322] falcon 15a80000.nvenc1: initialized [ 5.948953] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.961442] nvdec 15480000.nvdec: initialized [ 5.962066] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.971929] nvdec 15140000.nvdec1: initialized [ 5.972547] tsec 15500000.tsec: Adding to iommu group 18 [ 5.978508] tsec 15500000.tsec: initialized [ 5.979534] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.985593] tsec 15100000.tsecb: initialized [ 5.989626] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.018758] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.033621] gpio-374 (wifi-enable): hogged as output/high [ 6.033952] gpio-431 (camera-control-output-low): hogged as output/low [ 6.034278] gpio-432 (camera-control-output-low): hogged as output/low [ 6.036437] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.039491] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.040232] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.042072] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.043827] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.047508] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.052860] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.062372] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.069114] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.080204] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.085237] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.090970] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.099684] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.109318] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.116387] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.124097] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.130121] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.140210] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.146217] pva 16000000.pva0: Adding to iommu group 22 [ 6.173455] pva 16000000.pva0: initialized [ 6.180399] pva 16800000.pva1: Adding to iommu group 23 [ 6.192519] pva 16800000.pva1: initialized [ 6.198150] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.219926] nvdla 15880000.nvdla0: initialized [ 6.221470] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.230369] nvdla 158c0000.nvdla1: initialized [ 6.234539] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.234754] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.235084] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.235284] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.235995] tegradccommon 15200000.display-hub: dma mapping done [ 6.237056] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.237361] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.237847] tegradc 15200000.display: Adding to iommu group 26 [ 6.239817] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.240879] tegra_cec 3960000.tegra_cec: probed [ 6.246916] tegradc 15210000.display: Adding to iommu group 26 [ 6.247414] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.247800] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.254026] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.258904] generic_infoframe_type: 0x87 [ 6.264634] kfuse 3830000.kfuse: initialized [ 6.270727] tegradc 15200000.display: DT parsed successfully [ 6.275269] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.279051] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.284594] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.285297] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.295427] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.312018] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.319936] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.330761] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.337012] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.337954] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.357037] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.357256] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.364358] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.373775] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.387302] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.395778] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.396489] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.416516] tegradc 15210000.display: disp0 connected to head1->sor [ 6.418201] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.418987] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.425681] tegradc 15210000.display: DT parsed successfully [ 6.434848] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.435030] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.440342] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.462114] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.470538] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.477328] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.484805] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.492072] usb usb1: Product: xHCI Host Controller [ 6.496757] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.502881] usb usb1: SerialNumber: 3610000.xhci [ 6.509369] hub 1-0:1.0: USB hub found [ 6.511593] hub 1-0:1.0: 4 ports detected [ 6.516599] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.521394] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.528633] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.536741] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.544499] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.551704] usb usb2: Product: xHCI Host Controller [ 6.556461] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.562634] usb usb2: SerialNumber: 3610000.xhci [ 6.568236] hub 2-0:1.0: USB hub found [ 6.571127] hub 2-0:1.0: 4 ports detected [ 6.617853] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.623988] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.625431] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.625610] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.639036] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.640094] tegra194-cpufreq ccplex: probed with BWMGR [ 6.641310] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.641771] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.642260] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.643818] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.650923] tegra194-vi5 15c10000.vi: initialized [ 6.652135] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.652338] generic_infoframe_type: 0x87 [ 6.653158] mmc0: CQHCI version 5.10 [ 6.653284] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.653481] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.653486] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.653493] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.653498] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.653503] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.655239] tegradc 15200000.display: DT parsed successfully [ 6.658936] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.658944] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.658950] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.660472] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.665366] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.680144] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.688682] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.692725] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.692730] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.693326] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.699295] nvethernet 2490000.ethernet: Macsec not supported [ 6.700650] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.704892] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.705081] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.712573] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.774832] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.776019] mmc0: Command Queue Engine enabled [ 6.776023] mmc0: periodic cache flush enabled [ 6.776037] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.776587] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.776720] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.779444] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.780281] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.780287] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.780631] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.782458] tegradc 15200000.display: probed [ 6.884589] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.884706] Console: switching to colour frame buffer device 240x67 [ 6.886042] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.891297] tegradc 15200000.display: fb registered [ 6.899312] tegra-se-nvhost 15810000.se: initialized [ 6.903681] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.913396] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.920129] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.926004] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.931724] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.938309] tegra-se-nvhost 15820000.se: initialized [ 6.950613] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.954477] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.955400] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.962946] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.969945] tegra-se-nvhost 15830000.se: initialized [ 6.976317] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.976322] usb 1-2: Manufacturer: Generic [ 6.978508] hub 1-2:1.0: USB hub found [ 6.983963] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.990350] hub 1-2:1.0: 4 ports detected [ 6.994955] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.004866] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.011779] tegra-se-nvhost 15840000.se: initialized [ 7.025177] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.026212] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.032074] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.032711] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.040008] tegra_actmon d230000.actmon: in actmon_register()... [ 7.045879] Extcon AUX1(HDMI) enable [ 7.046029] tegradc 15210000.display: disp1 connected to head1->sor [ 7.053328] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.059468] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.063263] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.069043] tegradc 15210000.display: DT parsed successfully [ 7.075067] hvc_sysfs: hypervisor is not present [ 7.079699] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.081514] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.115591] ALSA device list: [ 7.115829] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.116334] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.116341] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.116344] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.116348] usb 2-3: Manufacturer: Generic [ 7.118576] No soundcards found. [ 7.124810] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.127136] hub 2-3:1.0: USB hub found [ 7.131387] tegradc 15210000.display: probed [ 7.167271] tegradc 15210000.display: fb registered [ 7.169239] hub 2-3:1.0: 4 ports detected [ 7.170651] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.170656] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.170663] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.180391] random: crng init done [ 7.199885] tegradc 15210000.display: blank - powerdown [ 7.205144] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.205147] Extcon DP: HPD disabled [ 7.205152] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.205184] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.214142] Freeing unused kernel memory: 3968K [ 7.216591] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.234835] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.247111] Run /init as init process ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.251075] tegradc 15200000.display: blank - powerdown [ 7.266840] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.288647] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.288651] Extcon AUX1(HDMI) disable [ 7.311956] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.312805] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.324088] tegradc 15200000.display: unblank [ 7.325103] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.325302] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.331108] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.331376] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.331380] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.332962] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.336937] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.336940] Extcon AUX1(HDMI) enable [ 7.349733] tegradc 15200000.display: sync windows ret = 247 [ 7.378691] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.380400] Extcon HDMI: HPD enabled [ 7.381842] tegradc 15200000.display: hdmi: plugged [ 7.396159] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.397786] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.399304] usb 1-3: Product: Bluetooth Radio [ 7.400675] usb 1-3: Manufacturer: Realtek [ 7.402044] usb 1-3: SerialNumber: 00e04c000001 [ 7.434275] Root device found: mmcblk0p1 [ 7.438309] Found dev node: /dev/mmcblk0p1 [ 7.474424] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.479824] Rootfs mounted over mmcblk0p1 [ 7.510530] Switching from initrd to actual rootfs [ 7.673335] systemd[1]: System time before build time, advancing clock. [ 7.747336] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.752431] systemd[1]: Detected architecture arm64. [ 7.801829] systemd[1]: Set hostname to . [ 7.968762] systemd-sysv-generator[254]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.325276] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.327092] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.332942] systemd[1]: Created slice system-modprobe.slice. [ 8.337739] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.342107] systemd[1]: Created slice User and Session Slice. [ 8.345703] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.350039] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.353505] systemd[1]: Reached target User and Group Name Lookups. [ 8.356815] systemd[1]: Reached target Slices. [ 8.360172] systemd[1]: Reached target Swap. [ 8.364361] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.368200] systemd[1]: Listening on Syslog Socket. [ 8.371822] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.375331] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.379756] systemd[1]: Listening on Journal Audit Socket. [ 8.383442] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.387215] systemd[1]: Listening on Journal Socket. [ 8.390993] systemd[1]: Listening on udev Control Socket. [ 8.394470] systemd[1]: Listening on udev Kernel Socket. [ 8.404402] systemd[1]: Mounting Huge Pages File System... [ 8.414151] systemd[1]: Mounting POSIX Message Queue File System... [ 8.422573] systemd[1]: Mounting RPC Pipe File System... [ 8.431276] systemd[1]: Mounting Kernel Debug File System... [ 8.439629] systemd[1]: Mounting Kernel Trace File System... [ 8.449687] systemd[1]: Starting Journal Service... [ 8.458609] systemd[1]: Starting Set the console keyboard layout... [ 8.466965] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.470482] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.477133] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.485600] systemd[1]: Started Nameserver information manager. [ 8.490490] systemd[1]: Reached target Network (Pre). [ 8.498053] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.500650] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.508794] systemd[1]: Starting Load Kernel Modules... [ 8.517319] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.525787] systemd[1]: Starting udev Coldplug all Devices... [ 8.537070] systemd[1]: Mounted Huge Pages File System. [ 8.540942] systemd[1]: Mounted POSIX Message Queue File System. [ 8.545009] systemd[1]: Mounted RPC Pipe File System. [ 8.548939] systemd[1]: Mounted Kernel Debug File System. [ 8.550352] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.551451] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.554107] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.554114] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.554122] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.554126] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.554772] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.554990] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.555138] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.565576] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.568990] systemd[1]: Mounted Kernel Trace File System. [ 8.576221] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.582078] systemd[1]: nvfb-udev.service: Succeeded. [ 8.586264] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.596246] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.601543] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.603861] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.618527] systemd[1]: Starting Load/Save Random Seed... [ 8.626167] systemd[1]: Starting Create System Users... [ 8.657092] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.657092] [ 8.676211] systemd[1]: Finished Load/Save Random Seed. [ 8.690184] systemd[1]: Finished Load Kernel Modules. [ 8.697087] systemd[1]: Finished Create System Users. [ 8.701827] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.707956] systemd[1]: Mounting Kernel Configuration File System... [ 8.716575] systemd[1]: Started OP-TEE Client Supplicant. [ 8.725195] systemd[1]: Starting Apply Kernel Variables... [ 8.733450] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.744312] systemd[1]: Finished Set the console keyboard layout. [ 8.748555] systemd[1]: Mounted Kernel Configuration File System. [ 10.012267] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.022478] imx219 9-0010: board setup failed [ 10.024015] imx219: probe of 9-0010 failed with error -121 [ 10.063064] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.078948] imx219 10-0010: board setup failed [ 10.080385] imx219: probe of 10-0010 failed with error -121 [ 10.132570] hot-surface-alert cooling state: 0 -> 1 [ 11.105546] using random self ethernet address [ 11.107805] using random host ethernet address [ 11.665181] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.667060] Creating 1 MTD partitions on "spi6.0": [ 11.668786] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.552699] using random self ethernet address [ 12.552712] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.833058] nvidia: loading out-of-tree module taints kernel. [ 59.772750] watchdog: watchdog0: watchdog did not stop! [ 60.255422] Trying to unregister non-registered hwtime source [ 63.317559] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.319195] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR]ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 clk_early initialized ÿäI/TCÿâmail_early initialized ÿä: ÿâfuse initialized hwwdt initialized ÿäNon-ÿât194_ec_get_ec_list: found 45 ecs ÿäsecure exteÿâec initialized ÿärÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿänalÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä DT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration miÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäght be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.643] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.644] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.688] I> width = 3840, height = 2160, frequency = 296703296 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.717] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.733] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.744] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000791] Console: colour dummy device 80x25 [ 0.002328] printk: console [tty0] enabled [ 0.002403] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002441] pid_max: default: 32768 minimum: 301 [ 0.002686] LSM: Security Framework initializing [ 0.002770] Yama: becoming mindful. [ 0.002820] SELinux: Initializing. [ 0.003001] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003052] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006057] rcu: Hierarchical SRCU implementation. [ 0.006326] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007075] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007113] DTB Build time: Aug 10 2022 20:31:49 [ 0.010376] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010657] Remapping and enabling EFI services. [ 0.012605] smp: Bringing up secondary CPUs ... [ 0.041677] Detected PIPT I-cache on CPU1 [ 0.041755] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071333] Detected PIPT I-cache on CPU2 [ 0.071433] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101022] Detected PIPT I-cache on CPU3 [ 0.101115] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130765] Detected PIPT I-cache on CPU4 [ 0.130868] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160435] Detected PIPT I-cache on CPU5 [ 0.160502] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160808] smp: Brought up 1 node, 6 CPUs [ 0.161090] SMP: Total of 6 processors activated. [ 0.161134] CPU features: detected: Privileged Access Never [ 0.161178] CPU features: detected: LSE atomic instructions [ 0.161192] CPU features: detected: User Access Override [ 0.161206] CPU features: detected: 32-bit EL0 Support [ 0.161219] CPU features: detected: RAS Extension Support [ 0.161232] CPU features: detected: CRC32 instructions [ 0.161244] CPU features: detected: 32-bit EL1 Support [ 0.231853] CPU: All CPU(s) started at EL2 [ 0.237160] devtmpfs: initialized [ 0.298728] Registered cp15_barrier emulation handler [ 0.298783] Registered setend emulation handler [ 0.298811] KASLR enabled [ 0.299081] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.299130] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.301599] pinctrl core: initialized pinctrl subsystem [ 0.302773] SMBIOS 3.0.0 present. [ 0.302815] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.303740] NET: Registered protocol family 16 [ 0.306352] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.307129] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.308152] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.308239] audit: initializing netlink subsys (disabled) [ 0.308592] audit: type=2000 audit(0.304:1): state=initialized audit_enabled=0 res=1 [ 0.309102] thermal_sys: Registered thermal governor 'step_wise' [ 0.309115] thermal_sys: Registered thermal governor 'power_allocator' [ 0.309148] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.312256] cpuidle: using governor menu [ 0.312769] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.313256] ASID allocator initialised with 32768 entries [ 0.313654] Serial: AMBA PL011 UART driver [ 0.318692] Tegra reboot handler registered. [ 0.414710] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.414897] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.415138] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.415208] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.415462] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.415530] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.415721] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.415785] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.415946] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.416010] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.420214] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.420264] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.420308] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.420349] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.420393] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.420433] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.420473] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.420513] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.420552] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.420614] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.420656] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.420718] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.420758] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.420833] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.420880] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.420919] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.420959] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.421101] mc-err: mcerr ops are set to t19x [ 0.436294] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.436323] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.436341] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.436358] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.444287] ACPI: Interpreter disabled. [ 0.445865] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.447752] iommu: Default domain type: Translated [ 0.447868] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.448386] SCSI subsystem initialized [ 0.448567] usbcore: registered new interface driver usbfs [ 0.448618] usbcore: registered new interface driver hub [ 0.448667] usbcore: registered new device driver usb [ 0.449482] mc: Linux media interface: v0.10 [ 0.449519] videodev: Linux video capture interface: v2.00 [ 0.449943] pps_core: LinuxPPS API ver. 1 registered [ 0.449961] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.449989] PTP clock support registered [ 0.450296] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.450690] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.450782] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.451615] Registered efivars operations [ 0.459081] FPGA manager framework [ 0.459214] Advanced Linux Sound Architecture Driver Initialized. [ 0.460049] Bluetooth: Core ver 2.22 [ 0.460100] NET: Registered protocol family 31 [ 0.460117] Bluetooth: HCI device and connection manager initialized [ 0.460139] Bluetooth: HCI socket layer initialized [ 0.460157] Bluetooth: L2CAP socket layer initialized [ 0.460187] Bluetooth: SCO socket layer initialized [ 0.461816] camchar: rtcpu character device driver loaded [ 0.462632] clocksource: Switched to clocksource arch_sys_counter [ 0.878601] VFS: Disk quotas dquot_6.6.0 [ 0.878723] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.879212] pnp: PnP ACPI: disabled [ 0.892159] la/ptsa driver initialized. [ 0.892334] NET: Registered protocol family 2 [ 0.892552] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.900092] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.900310] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.900661] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.901285] TCP: Hash tables configured (established 65536 bind 65536) [ 0.901425] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.901579] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.901870] NET: Registered protocol family 1 [ 0.902817] RPC: Registered named UNIX socket transport module. [ 0.902859] RPC: Registered udp transport module. [ 0.902879] RPC: Registered tcp transport module. [ 0.902899] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.902932] PCI: CLS 0 bytes, default 64 [ 0.903209] Trying to unpack rootfs image as initramfs... [ 1.168455] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.171562] Freeing initrd memory: 8196K [ 1.175613] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.175654] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.175710] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.176072] kvm [1]: IPA Size Limit: 40 bits [ 1.176574] kvm [1]: vgic interrupt IRQ9 [ 1.177060] kvm [1]: VHE mode initialized successfully [ 1.178347] Initialise system trusted keyrings [ 1.178653] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.183766] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.184548] NFS: Registering the id_resolver key type [ 1.184588] Key type id_resolver registered [ 1.184607] Key type id_legacy registered [ 1.184692] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.184758] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.184821] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.194465] NET: Registered protocol family 38 [ 1.194499] Key type asymmetric registered [ 1.194515] Asymmetric key parser 'x509' registered [ 1.194567] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.194922] io scheduler mq-deadline registered [ 1.194947] io scheduler kyber registered [ 1.200713] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.204202] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.204316] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.204406] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.204484] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.204559] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.211066] scrncapt: init (heads:4 wins:6 planes:4) [ 1.211123] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.212309] EINJ: ACPI disabled. [ 1.216370] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.216397] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.216412] tegra-pmc: ### PMC reset level: L1 [ 1.216427] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.216481] tegra-pmc: PMC Prod config success [ 1.222447] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.229038] random: fast init done [ 1.229106] printk: console [ttyTCU0] enabled [ 2.781239] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.785300] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.789901] arm-smmu 10000000.iommu: stage 1 translation [ 2.795734] arm-smmu 10000000.iommu: stage 2 translation [ 2.800846] arm-smmu 10000000.iommu: nested translation [ 2.806435] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.813608] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.823855] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.826450] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.833298] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.841012] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.846086] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.850803] arm-smmu 12000000.iommu: stage 1 translation [ 2.856570] arm-smmu 12000000.iommu: stage 2 translation [ 2.861738] arm-smmu 12000000.iommu: nested translation [ 2.867425] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.874688] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.884700] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.887725] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.894030] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.901862] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.911610] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.914468] tegra_profiler: auth: init [ 2.918824] THERMAL EST: found 3 subdevs [ 2.922345] THERMAL EST num_resources: 0 [ 2.925969] [THERMAL EST subdev 0] [ 2.929565] [THERMAL EST subdev 1] [ 2.932719] [THERMAL EST subdev 2] [ 2.936222] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.942677] THERMAL EST: thz register success. [ 2.946900] THERMAL EST: end of probe, return err: 0 [ 2.951960] nvsciipc: loaded module [ 2.959259] tun: Universal TUN/TAP device driver, 1.6 [ 2.961650] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.967967] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.973260] e1000e: Intel(R) PRO/1000 Network Driver [ 2.978455] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.984270] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.989830] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.996119] PPP generic driver version 2.4.2 [ 3.000050] PPP BSD Compression module registered [ 3.004809] PPP Deflate Compression module registered [ 3.010062] PPP MPPE Compression module registered [ 3.014833] usbcore: registered new interface driver r8152 [ 3.020586] usbcore: registered new interface driver asix [ 3.025677] usbcore: registered new interface driver ax88179_178a [ 3.031794] usbcore: registered new interface driver cdc_ether [ 3.037982] usbcore: registered new interface driver net1080 [ 3.043589] usbcore: registered new interface driver cdc_subset [ 3.049366] usbcore: registered new interface driver zaurus [ 3.055061] usbcore: registered new interface driver cdc_ncm [ 3.060739] usbcore: registered new interface driver aqc111 [ 3.066528] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.072725] ohci-pci: OHCI PCI platform driver [ 3.076795] ohci-platform: OHCI generic platform driver [ 3.083007] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.088979] usbcore: registered new interface driver uas [ 3.093328] usbcore: registered new interface driver usb-storage [ 3.099512] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.105227] mousedev: PS/2 mouse device common for all mice [ 3.110472] usbcore: registered new interface driver xpad [ 3.118312] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.121215] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.129024] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.135659] i2c /dev entries driver [ 3.138669] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.144422] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.150009] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.155436] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.160707] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.165965] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.171425] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.185162] device-mapper: uevent: version 1.0.3 [ 3.185619] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.192226] cpuidle: Initializing cpuidle driver [ 3.195925] sdhci: Secure Digital Host Controller Interface driver [ 3.200810] sdhci: Copyright(c) Pierre Ossman [ 3.204935] Synopsys Designware Multimedia Card Interface Driver [ 3.211178] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.216933] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.217721] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.230346] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.252861] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.262782] vdd-1v0: supplied by regulator-dummy [ 3.268424] vdd-1v8-hs: supplied by regulator-dummy [ 3.273245] vdd-1v8-ls: supplied by regulator-dummy [ 3.278078] vdd-1v8-ao: supplied by regulator-dummy [ 3.282029] vddio-ddr-1v1: supplied by regulator-dummy [ 3.286475] vdd-rtc: supplied by regulator-dummy [ 3.288321] spmic-ldo1: supplied by regulator-dummy [ 3.289541] vdd-ao-3v3: supplied by regulator-dummy [ 3.295753] vddio-emmc-3v3: supplied by regulator-dummy [ 3.302147] spmic-ldo4: supplied by regulator-dummy [ 3.303430] vdd-usb-3v3: supplied by regulator-dummy [ 3.309772] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.316124] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.321693] spmic-ldo8: supplied by vdd-1v8-ls [ 3.323259] gpio-510 (gpio_default): hogged as output/high [ 3.324693] gpio-511 (gpio_default): hogged as output/high [ 3.327573] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.463498] max77686-rtc max77620-rtc: registered as rtc0 [ 3.464937] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.465302] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.304677] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.306005] hid: raw HID events driver (C) Jiri Kosina [ 4.306874] usbcore: registered new interface driver usbhid [ 4.307033] usbhid: USB HID core driver [ 4.309396] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.310812] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.336380] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.410150] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.775 ms, total boot 74.574 ms) ÿá[ 4.394750] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.395265] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.396326] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.396975] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.398496] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.399245] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.399863] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.401328] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.401632] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.403971] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.411142] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.417582] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.423839] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.428747] denver_knobs_init:MTS_VERSION:55637613 [ 4.441545] t19x_cache tegra-cache: probed [ 4.445089] optee: probing for conduit method. [ 4.445961] optee: revision 3.16 (65cc2218) [ 4.447164] optee: dynamic shared memory is enabled [ 4.449843] optee: initialized driver [ 4.458344] nvpmodel: initialized successfully [ 4.459114] tegra_hv: get_hvd: not initialized yet [ 4.461909] user_ivc_mempool: hypervisor not present [ 4.468203] usbcore: registered new interface driver snd-usb-audio [ 4.474534] u32 classifier [ 4.475537] input device check on [ 4.479260] Actions configured [ 4.483244] Initializing XFRM netlink socket [ 4.488039] NET: Registered protocol family 10 [ 4.494489] Segment Routing with IPv6 [ 4.495192] NET: Registered protocol family 17 [ 4.499600] NET: Registered protocol family 15 [ 4.503999] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.517664] Bluetooth: RFCOMM socket layer initialized [ 4.522027] Bluetooth: RFCOMM ver 1.11 [ 4.526204] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.531762] Bluetooth: HIDP socket layer initialized [ 4.537979] 9pnet: Installing 9P2000 support [ 4.541209] Key type dns_resolver registered [ 4.546857] registered taskstats version 1 [ 4.549866] Loading compiled-in X.509 certificates [ 4.562950] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.565647] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.576186] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.577632] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.586476] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.594737] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.710756] tegra194-pcie 14160000.pcie: Link up [ 4.713915] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.714173] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.714344] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.714672] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.714954] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.715434] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.715893] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.729714] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.730185] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.730745] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.732256] pci 0004:01:00.0: supports D1 D2 [ 4.732410] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.745062] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.745420] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.745713] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.746172] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.746427] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.746740] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.746939] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.752787] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.761726] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.771238] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.775958] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.781599] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.788587] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.797846] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.799216] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.808005] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.816443] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.922829] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.923367] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.923559] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.923753] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.924085] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.924278] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.924713] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.925156] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.950524] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.951002] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.952966] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.954459] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.956351] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.958022] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.959273] pci 0005:00:00.0: Removing from iommu group 7 [ 5.959857] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 6.003335] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.028067] host1x 13e10000.host1x: initialized [ 6.029948] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.031240] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.032776] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.033569] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.035186] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.036024] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.037102] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.037774] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.039005] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.039660] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.040608] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.041305] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.049833] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.056996] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.067063] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.073635] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.083851] falcon 15340000.vic: Adding to iommu group 17 [ 6.098418] falcon 15340000.vic: initialized [ 6.099686] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.105228] falcon 15380000.nvjpg: initialized [ 6.105935] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.117079] falcon 154c0000.nvenc: initialized [ 6.117606] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.126699] falcon 15a80000.nvenc1: initialized [ 6.127477] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.139780] nvdec 15480000.nvdec: initialized [ 6.140427] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.149817] nvdec 15140000.nvdec1: initialized [ 6.150384] tsec 15500000.tsec: Adding to iommu group 18 [ 6.156015] tsec 15500000.tsec: initialized [ 6.156464] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.163756] tsec 15100000.tsecb: initialized [ 6.168188] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.197746] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.212420] gpio-374 (wifi-enable): hogged as output/high [ 6.212736] gpio-431 (camera-control-output-low): hogged as output/low [ 6.213180] gpio-432 (camera-control-output-low): hogged as output/low [ 6.215127] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.217262] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.217883] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.219888] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.221307] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.226396] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.232230] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.240793] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.247684] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.259277] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.264323] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.269864] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.278704] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.288152] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.295684] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.303083] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.308330] random: crng init done [ 6.309174] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.322398] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.328408] pva 16000000.pva0: Adding to iommu group 22 [ 6.356036] pva 16000000.pva0: initialized [ 6.360587] pva 16800000.pva1: Adding to iommu group 23 [ 6.372760] pva 16800000.pva1: initialized [ 6.377274] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.391446] nvdla 15880000.nvdla0: initialized [ 6.393130] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.401903] nvdla 158c0000.nvdla1: initialized [ 6.406326] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.406592] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.406813] tegradc 15200000.display: Adding to iommu group 26 [ 6.406925] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.407435] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.407849] tegradccommon 15200000.display-hub: dma mapping done [ 6.409368] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.412665] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.415065] tegradc 15210000.display: Adding to iommu group 26 [ 6.418592] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.419711] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.419946] generic_infoframe_type: 0x87 [ 6.420055] tegradc 15200000.display: DT parsed successfully [ 6.420166] tegradc 15200000.display: Display dc.000000000d38046d registered with id=0 [ 6.424255] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.429518] tegra_cec 3960000.tegra_cec: probed [ 6.430264] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.436139] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.441943] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.445521] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.446855] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.454114] kfuse 3830000.kfuse: initialized [ 6.461998] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.463493] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.467282] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.476489] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.480808] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.481451] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.488545] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.496508] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.503664] tegradc 15210000.display: disp0 connected to head1->sor [ 6.507558] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.512464] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.523627] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.529185] tegradc 15210000.display: DT parsed successfully [ 6.537208] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.542651] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.564619] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.632987] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.633403] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.636182] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.644264] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.653239] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.659718] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.667045] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.674400] usb usb1: Product: xHCI Host Controller [ 6.679508] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.685819] usb usb1: SerialNumber: 3610000.xhci [ 6.691417] hub 1-0:1.0: USB hub found [ 6.694077] hub 1-0:1.0: 4 ports detected [ 6.698811] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.703500] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.711373] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.719176] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.726951] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.733975] usb usb2: Product: xHCI Host Controller [ 6.739172] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.745407] usb usb2: SerialNumber: 3610000.xhci [ 6.750852] hub 2-0:1.0: USB hub found [ 6.753834] hub 2-0:1.0: 4 ports detected [ 6.799635] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.806004] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.807574] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.807767] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.821139] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.822250] tegra194-cpufreq ccplex: probed with BWMGR [ 6.823849] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.824074] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.824545] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.825898] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.831259] tegra194-vi5 15c10000.vi: initialized [ 6.832875] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.833761] generic_infoframe_type: 0x87 [ 6.834205] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.835681] mmc0: CQHCI version 5.10 [ 6.838014] tegradc 15200000.display: DT parsed successfully [ 6.844193] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.847638] tegradc 15200000.display: Display dc.00000000d3dd8752 registered with id=0 [ 6.853354] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.853364] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.862340] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.864542] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.869493] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.875755] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.875763] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.882665] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.891172] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.906681] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.913316] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.921257] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.927837] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.933941] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.935349] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.941925] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.950893] mmc0: Command Queue Engine enabled [ 6.950898] mmc0: periodic cache flush enabled [ 6.950913] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.951457] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.951644] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.953446] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.954671] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.955696] tegradc 15200000.display: probed [ 6.964361] nvethernet 2490000.ethernet: Macsec not supported [ 6.972315] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.020970] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 7.054271] Console: switching to colour frame buffer device 240x67 [ 7.055386] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 7.060140] tegradc 15200000.display: fb registered [ 7.066038] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.078185] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.078356] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.084918] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.091845] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.096565] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.104190] tegra-se-nvhost 15810000.se: initialized [ 7.115079] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.120624] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.126934] tegra-se-nvhost 15820000.se: initialized [ 7.132968] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.137745] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.144117] tegra-se-nvhost 15830000.se: initialized [ 7.149482] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.155270] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.161823] tegra-se-nvhost 15840000.se: initialized [ 7.167648] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.171139] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.173906] tegra_actmon d230000.actmon: in actmon_register()... [ 7.182068] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.187173] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.194435] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.195109] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.200670] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.202044] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.202071] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.202075] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.202078] usb 1-2: Manufacturer: Generic [ 7.204091] hub 1-2:1.0: USB hub found [ 7.205315] hub 1-2:1.0: 4 ports detected [ 7.207897] Extcon AUX1(HDMI) enable [ 7.208041] tegradc 15210000.display: disp1 connected to head1->sor [ 7.215873] hvc_sysfs: hypervisor is not present [ 7.223190] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.259159] ALSA device list: [ 7.265152] tegradc 15210000.display: DT parsed successfully [ 7.270019] No soundcards found. [ 7.289491] tegradc 15210000.display: Display dc.000000001d71ea83 registered with id=1 [ 7.289648] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.303732] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.315613] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.316993] tegradc 15210000.display: probed [ 7.321386] tegradc 15210000.display: fb registered [ 7.329403] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.333387] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.335286] Freeing unused kernel memory: 3968K [ 7.341441] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.351623] tegradc 15200000.display: blank - powerdown [ 7.352334] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.352341] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.352345] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.352349] usb 2-3: Manufacturer: Generic [ 7.362770] Run /init as init process [ 7.362998] hub 2-3:1.0: USB hub found [ 7.365266] hub 2-3:1.0: 4 ports detected [ 7.388190] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.388194] Extcon AUX1(HDMI) disable [ 7.411605] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.412504] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.424881] tegradc 15200000.display: unblank [ 7.425968] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.426163] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.426682] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.426688] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.432463] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.434329] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.438376] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.438379] Extcon AUX1(HDMI) enable [ 7.451095] tegradc 15200000.display: sync windows ret = 246 [ 7.474680] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.493400] tegradc 15210000.display: blank - powerdown [ 7.498515] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.498520] Extcon DP: HPD disabled [ 7.498524] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.498535] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.498560] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.530397] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.537784] Extcon HDMI: HPD enabled [ 7.541451] tegradc 15200000.display: hdmi: plugged [ 7.581157] Root device found: mmcblk0p1 [ 7.584463] Found dev node: /dev/mmcblk0p1 [ 7.621072] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.626612] Rootfs mounted over mmcblk0p1 [ 7.639867] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.641255] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.642589] usb 1-3: Product: Bluetooth Radio [ 7.643906] usb 1-3: Manufacturer: Realtek [ 7.645184] usb 1-3: SerialNumber: 00e04c000001 [ 7.665517] Switching from initrd to actual rootfs [ 7.818088] systemd[1]: System time before build time, advancing clock. [ 7.892036] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.896951] systemd[1]: Detected architecture arm64. [ 7.943103] systemd[1]: Set hostname to . [ 8.109433] systemd-sysv-generator[251]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.478754] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.480377] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.486039] systemd[1]: Created slice system-modprobe.slice. [ 8.490499] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.494534] systemd[1]: Created slice User and Session Slice. [ 8.497807] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.501884] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.505283] systemd[1]: Reached target User and Group Name Lookups. [ 8.508416] systemd[1]: Reached target Slices. [ 8.511363] systemd[1]: Reached target Swap. [ 8.515193] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.518791] systemd[1]: Listening on Syslog Socket. [ 8.522240] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.525561] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.529738] systemd[1]: Listening on Journal Audit Socket. [ 8.533341] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.537143] systemd[1]: Listening on Journal Socket. [ 8.540820] systemd[1]: Listening on udev Control Socket. [ 8.545914] systemd[1]: Listening on udev Kernel Socket. [ 8.554408] systemd[1]: Mounting Huge Pages File System... [ 8.564621] systemd[1]: Mounting POSIX Message Queue File System... [ 8.572896] systemd[1]: Mounting RPC Pipe File System... [ 8.581425] systemd[1]: Mounting Kernel Debug File System... [ 8.590151] systemd[1]: Mounting Kernel Trace File System... [ 8.600482] systemd[1]: Starting Journal Service... [ 8.609954] systemd[1]: Starting Set the console keyboard layout... [ 8.618510] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.622169] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.628904] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.637015] systemd[1]: Started Nameserver information manager. [ 8.641700] systemd[1]: Reached target Network (Pre). [ 8.648736] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.650612] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.658834] systemd[1]: Starting Load Kernel Modules... [ 8.667968] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.676214] systemd[1]: Starting udev Coldplug all Devices... [ 8.686103] systemd[1]: Mounted Huge Pages File System. [ 8.690002] systemd[1]: Mounted POSIX Message Queue File System. [ 8.694245] systemd[1]: Mounted RPC Pipe File System. [ 8.697832] systemd[1]: Mounted Kernel Debug File System. [ 8.701430] systemd[1]: Mounted Kernel Trace File System. [ 8.705838] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.708590] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.709199] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.710970] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.712980] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.712999] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.713003] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.713266] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.718921] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.719079] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.721909] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.735879] systemd[1]: nvfb-udev.service: Succeeded. [ 8.740243] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.750767] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.755815] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.757609] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.772192] systemd[1]: Starting Load/Save Random Seed... [ 8.781430] systemd[1]: Starting Create System Users... [ 8.817093] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.817093] [ 8.830588] systemd[1]: Finished Load/Save Random Seed. [ 8.842577] systemd[1]: Finished Create System Users. [ 8.849242] systemd[1]: Finished Load Kernel Modules. [ 8.853706] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.861451] systemd[1]: Mounting Kernel Configuration File System... [ 8.869680] systemd[1]: Started OP-TEE Client Supplicant. [ 8.878294] systemd[1]: Starting Apply Kernel Variables... [ 8.886958] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.897331] systemd[1]: Finished Set the console keyboard layout. [ 8.901474] systemd[1]: Mounted Kernel Configuration File System. [ 10.318775] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.323996] imx219 9-0010: board setup failed [ 10.324087] imx219: probe of 9-0010 failed with error -121 [ 10.335597] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.340846] imx219 10-0010: board setup failed [ 10.344229] imx219: probe of 10-0010 failed with error -121 [ 10.464657] hot-surface-alert cooling state: 0 -> 1 [ 11.118191] using random self ethernet address [ 11.157457] using random host ethernet address [ 12.175222] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.176430] Creating 1 MTD partitions on "spi6.0": [ 12.177548] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.636711] using random self ethernet address [ 12.637914] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.875538] nvidia: loading out-of-tree module taints kernel. [ 59.548660] watchdog: watchdog0: watchdog did not stop! [ 59.991526] Trying to unregister non-registered hwtime source [ 63.049995] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.051698] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] tÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/Tÿâclk_early initialized ÿäC: Noÿâmail_early initialized ÿänÿâfuse initialized hwwdt initialized ÿä-secuÿât194_ec_get_ec_list: found 45 ecs ÿäre externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized cvc initialized ÿä:20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh6ÿâcvc_late initialized regulator_post initialized ÿä4 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuratiÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäon might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.589] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.606] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.629] I> edid read success [0003.641] I> edid read success [0003.642] I> width = 640, height = 480, frequency = 25174825 [0003.642] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1280, height = 768, frequency = 79500000 [0003.643] I> width = 1360, height = 768, frequency = 85500000 [0003.643] I> width = 720, height = 480, frequency = 26973026 [0003.647] I> width = 720, height = 576, frequency = 26973026 [0003.653] I> width = 1280, height = 720, frequency = 74175824 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1920, height = 1080, frequency = 148351648 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.681] I> width = 720, height = 576, frequency = 26973026 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 4096, height = 2160, frequency = 296703296 [0003.715] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.727] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.741] initializing target [0003.742] calling apps_init() [0003.742] starting app kernel_boot_app [0003.743] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000744] Console: colour dummy device 80x25 [ 0.002236] printk: console [tty0] enabled [ 0.002298] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002334] pid_max: default: 32768 minimum: 301 [ 0.002520] LSM: Security Framework initializing [ 0.002578] Yama: becoming mindful. [ 0.002621] SELinux: Initializing. [ 0.002778] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002832] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005976] rcu: Hierarchical SRCU implementation. [ 0.006213] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007099] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007158] DTB Build time: Aug 10 2022 20:31:49 [ 0.010115] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010496] Remapping and enabling EFI services. [ 0.012485] smp: Bringing up secondary CPUs ... [ 0.042822] Detected PIPT I-cache on CPU1 [ 0.042938] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072389] Detected PIPT I-cache on CPU2 [ 0.072544] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102153] Detected PIPT I-cache on CPU3 [ 0.102246] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132364] Detected PIPT I-cache on CPU4 [ 0.132527] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162175] Detected PIPT I-cache on CPU5 [ 0.162343] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162658] smp: Brought up 1 node, 6 CPUs [ 0.162979] SMP: Total of 6 processors activated. [ 0.163058] CPU features: detected: Privileged Access Never [ 0.163091] CPU features: detected: LSE atomic instructions [ 0.163111] CPU features: detected: User Access Override [ 0.163131] CPU features: detected: 32-bit EL0 Support [ 0.163150] CPU features: detected: RAS Extension Support [ 0.163169] CPU features: detected: CRC32 instructions [ 0.163190] CPU features: detected: 32-bit EL1 Support [ 0.232298] CPU: All CPU(s) started at EL2 [ 0.239097] devtmpfs: initialized [ 0.285690] Registered cp15_barrier emulation handler [ 0.285843] Registered setend emulation handler [ 0.285868] KASLR enabled [ 0.286120] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286180] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287577] pinctrl core: initialized pinctrl subsystem [ 0.288646] SMBIOS 3.0.0 present. [ 0.288694] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289349] NET: Registered protocol family 16 [ 0.291255] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291796] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292506] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292573] audit: initializing netlink subsys (disabled) [ 0.292829] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293304] thermal_sys: Registered thermal governor 'step_wise' [ 0.293310] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293341] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295670] cpuidle: using governor menu [ 0.296037] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296489] ASID allocator initialised with 32768 entries [ 0.296736] Serial: AMBA PL011 UART driver [ 0.299836] Tegra reboot handler registered. [ 0.374946] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375108] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.375353] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.375409] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.375537] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.375590] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.375730] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.375802] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.375987] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376040] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.378186] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.378229] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.378270] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.378310] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.378350] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.378391] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.378445] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.378497] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.378533] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.378589] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.378641] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.378675] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.378728] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.378763] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.378804] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.378839] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.378872] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.378970] mc-err: mcerr ops are set to t19x [ 0.390380] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390423] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390446] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390467] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.396840] ACPI: Interpreter disabled. [ 0.397967] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.399281] iommu: Default domain type: Translated [ 0.399357] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.399716] SCSI subsystem initialized [ 0.399873] usbcore: registered new interface driver usbfs [ 0.399924] usbcore: registered new interface driver hub [ 0.399964] usbcore: registered new device driver usb [ 0.400469] mc: Linux media interface: v0.10 [ 0.400513] videodev: Linux video capture interface: v2.00 [ 0.400866] pps_core: LinuxPPS API ver. 1 registered [ 0.400885] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.400921] PTP clock support registered [ 0.401151] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.401442] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401542] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.402191] Registered efivars operations [ 0.409068] FPGA manager framework [ 0.409203] Advanced Linux Sound Architecture Driver Initialized. [ 0.409758] Bluetooth: Core ver 2.22 [ 0.409801] NET: Registered protocol family 31 [ 0.409822] Bluetooth: HCI device and connection manager initialized [ 0.409851] Bluetooth: HCI socket layer initialized [ 0.409877] Bluetooth: L2CAP socket layer initialized [ 0.409922] Bluetooth: SCO socket layer initialized [ 0.411539] camchar: rtcpu character device driver loaded [ 0.412299] clocksource: Switched to clocksource arch_sys_counter [ 0.724596] VFS: Disk quotas dquot_6.6.0 [ 0.724679] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.725033] pnp: PnP ACPI: disabled [ 0.735139] la/ptsa driver initialized. [ 0.735298] NET: Registered protocol family 2 [ 0.735477] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.740018] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.740103] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.740493] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.740954] TCP: Hash tables configured (established 65536 bind 65536) [ 0.741115] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.741220] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.741425] NET: Registered protocol family 1 [ 0.742352] RPC: Registered named UNIX socket transport module. [ 0.742394] RPC: Registered udp transport module. [ 0.742418] RPC: Registered tcp transport module. [ 0.742440] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.742478] PCI: CLS 0 bytes, default 64 [ 0.742808] Trying to unpack rootfs image as initramfs... [ 1.011118] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.014262] Freeing initrd memory: 8196K [ 1.019186] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.019234] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.019276] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.019658] kvm [1]: IPA Size Limit: 40 bits [ 1.020066] kvm [1]: vgic interrupt IRQ9 [ 1.020589] kvm [1]: VHE mode initialized successfully [ 1.022009] Initialise system trusted keyrings [ 1.022310] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.027780] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.028706] NFS: Registering the id_resolver key type [ 1.028743] Key type id_resolver registered [ 1.028760] Key type id_legacy registered [ 1.028843] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.028869] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.028910] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.038712] NET: Registered protocol family 38 [ 1.038737] Key type asymmetric registered [ 1.038753] Asymmetric key parser 'x509' registered [ 1.038838] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.039152] io scheduler mq-deadline registered [ 1.039174] io scheduler kyber registered [ 1.045592] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.048907] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.048988] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.049062] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.049134] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.049206] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.056169] scrncapt: init (heads:4 wins:6 planes:4) [ 1.056199] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.057675] EINJ: ACPI disabled. [ 1.061720] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.061749] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.061766] tegra-pmc: ### PMC reset level: L1 [ 1.061780] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.061829] tegra-pmc: PMC Prod config success [ 1.066695] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.072991] random: fast init done [ 1.083455] printk: console [ttyTCU0] enabled [ 2.623940] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.628452] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.633040] arm-smmu 10000000.iommu: stage 1 translation [ 2.638826] arm-smmu 10000000.iommu: stage 2 translation [ 2.644245] arm-smmu 10000000.iommu: nested translation [ 2.649327] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.656495] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.666688] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.669621] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.676182] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.683963] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.689501] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.693963] arm-smmu 12000000.iommu: stage 1 translation [ 2.699452] arm-smmu 12000000.iommu: stage 2 translation [ 2.704878] arm-smmu 12000000.iommu: nested translation [ 2.710570] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.717484] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.727561] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.730870] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.737440] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.744635] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.754460] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.757833] tegra_profiler: auth: init [ 2.761991] THERMAL EST: found 3 subdevs [ 2.765520] THERMAL EST num_resources: 0 [ 2.769109] [THERMAL EST subdev 0] [ 2.772683] [THERMAL EST subdev 1] [ 2.776083] [THERMAL EST subdev 2] [ 2.779083] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.785449] THERMAL EST: thz register success. [ 2.790034] THERMAL EST: end of probe, return err: 0 [ 2.794977] nvsciipc: loaded module [ 2.801609] tun: Universal TUN/TAP device driver, 1.6 [ 2.804701] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.811106] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.816473] e1000e: Intel(R) PRO/1000 Network Driver [ 2.821601] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.827427] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.832715] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.838902] PPP generic driver version 2.4.2 [ 2.843410] PPP BSD Compression module registered [ 2.847952] PPP Deflate Compression module registered [ 2.853199] PPP MPPE Compression module registered [ 2.857953] usbcore: registered new interface driver r8152 [ 2.863451] usbcore: registered new interface driver asix [ 2.869052] usbcore: registered new interface driver ax88179_178a [ 2.874917] usbcore: registered new interface driver cdc_ether [ 2.881125] usbcore: registered new interface driver net1080 [ 2.886459] usbcore: registered new interface driver cdc_subset [ 2.892754] usbcore: registered new interface driver zaurus [ 2.898196] usbcore: registered new interface driver cdc_ncm [ 2.904128] usbcore: registered new interface driver aqc111 [ 2.909755] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.915594] ohci-pci: OHCI PCI platform driver [ 2.919886] ohci-platform: OHCI generic platform driver [ 2.925552] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.931934] usbcore: registered new interface driver uas [ 2.936191] usbcore: registered new interface driver usb-storage [ 2.942264] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.948241] mousedev: PS/2 mouse device common for all mice [ 2.953363] usbcore: registered new interface driver xpad [ 2.961363] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.964348] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.971874] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.978366] i2c /dev entries driver [ 2.982018] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.987516] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.992811] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.998214] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.003856] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.009094] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.014731] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.026792] device-mapper: uevent: version 1.0.3 [ 3.027182] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.034814] cpuidle: Initializing cpuidle driver [ 3.038588] sdhci: Secure Digital Host Controller Interface driver [ 3.043958] sdhci: Copyright(c) Pierre Ossman [ 3.048048] Synopsys Designware Multimedia Card Interface Driver [ 3.053949] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.059883] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.060517] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.073179] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.091151] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.100093] vdd-1v0: supplied by regulator-dummy [ 3.105473] vdd-1v8-hs: supplied by regulator-dummy [ 3.110214] vdd-1v8-ls: supplied by regulator-dummy [ 3.114874] vdd-1v8-ao: supplied by regulator-dummy [ 3.118671] vddio-ddr-1v1: supplied by regulator-dummy [ 3.123024] vdd-rtc: supplied by regulator-dummy [ 3.124639] spmic-ldo1: supplied by regulator-dummy [ 3.126016] vdd-ao-3v3: supplied by regulator-dummy [ 3.132106] vddio-emmc-3v3: supplied by regulator-dummy [ 3.138299] spmic-ldo4: supplied by regulator-dummy [ 3.139488] vdd-usb-3v3: supplied by regulator-dummy [ 3.145544] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.151623] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.157121] spmic-ldo8: supplied by vdd-1v8-ls [ 3.158421] gpio-510 (gpio_default): hogged as output/high [ 3.160190] gpio-511 (gpio_default): hogged as output/high [ 3.166808] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.305274] max77686-rtc max77620-rtc: registered as rtc0 [ 3.306231] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.306520] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.013034] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.014010] hid: raw HID events driver (C) Jiri Kosina [ 4.014698] usbcore: registered new interface driver usbhid [ 4.014867] usbhid: USB HID core driver [ 4.016640] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.017707] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.086429] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.161836] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.217 ms) ÿá[ 4.102736] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.103287] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.104557] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.105309] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.106819] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.107524] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.108163] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.109569] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.109893] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.111711] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.119580] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.125754] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.130536] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.137185] denver_knobs_init:MTS_VERSION:55637613 [ 4.149765] t19x_cache tegra-cache: probed [ 4.152413] optee: probing for conduit method. [ 4.153236] optee: revision 3.16 (65cc2218) [ 4.154454] optee: dynamic shared memory is enabled [ 4.158175] optee: initialized driver [ 4.164069] nvpmodel: initialized successfully [ 4.165498] tegra_hv: get_hvd: not initialized yet [ 4.170375] user_ivc_mempool: hypervisor not present [ 4.176443] usbcore: registered new interface driver snd-usb-audio [ 4.182495] u32 classifier [ 4.183863] input device check on [ 4.187667] Actions configured [ 4.191522] Initializing XFRM netlink socket [ 4.196239] NET: Registered protocol family 10 [ 4.202609] Segment Routing with IPv6 [ 4.203737] NET: Registered protocol family 17 [ 4.207756] NET: Registered protocol family 15 [ 4.212436] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.225917] Bluetooth: RFCOMM socket layer initialized [ 4.230751] Bluetooth: RFCOMM ver 1.11 [ 4.234327] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.240473] Bluetooth: HIDP socket layer initialized [ 4.246158] 9pnet: Installing 9P2000 support [ 4.249936] Key type dns_resolver registered [ 4.254997] registered taskstats version 1 [ 4.258021] Loading compiled-in X.509 certificates [ 4.270609] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.274310] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.284184] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.285999] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.294762] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.303143] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.420373] tegra194-pcie 14160000.pcie: Link up [ 4.423181] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.423430] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.423590] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.423858] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.424060] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.424509] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.424943] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.438319] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.438892] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.439341] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.440926] pci 0004:01:00.0: supports D1 D2 [ 4.441117] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.450157] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.450510] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.450731] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.451166] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.451409] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.451600] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.455246] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.462604] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.471105] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.481047] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.485927] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.491197] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.498030] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.507412] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.509087] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.517337] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.526302] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.632418] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.633087] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.633297] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.633447] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.633746] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.633940] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.634326] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.634744] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.652797] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.653248] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.655188] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.656576] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.657912] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.659326] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.660169] pci 0005:00:00.0: Removing from iommu group 7 [ 5.660585] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.691300] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.712828] host1x 13e10000.host1x: initialized [ 5.714499] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.715507] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.716809] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.717576] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.718656] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.719306] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.720423] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.721029] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.725753] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.732467] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.742578] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.749343] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.759574] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.766492] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.776666] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.783407] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.793556] falcon 15340000.vic: Adding to iommu group 17 [ 5.807623] falcon 15340000.vic: initialized [ 5.808571] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.813599] falcon 15380000.nvjpg: initialized [ 5.814108] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.826005] falcon 154c0000.nvenc: initialized [ 5.826538] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.836261] falcon 15a80000.nvenc1: initialized [ 5.836799] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.847897] nvdec 15480000.nvdec: initialized [ 5.848595] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.857649] nvdec 15140000.nvdec1: initialized [ 5.858204] tsec 15500000.tsec: Adding to iommu group 18 [ 5.864170] tsec 15500000.tsec: initialized [ 5.864714] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.873062] tsec 15100000.tsecb: initialized [ 5.876786] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.902588] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.912708] gpio-374 (wifi-enable): hogged as output/high [ 5.912981] gpio-431 (camera-control-output-low): hogged as output/low [ 5.913313] gpio-432 (camera-control-output-low): hogged as output/low [ 5.914952] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.916826] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.917759] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.924722] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.930013] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.935739] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.941339] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.949492] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.956788] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.967939] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.973450] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.979402] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.988539] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.997460] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.004562] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.012226] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.018774] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.028140] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.034696] pva 16000000.pva0: Adding to iommu group 22 [ 6.060616] pva 16000000.pva0: initialized [ 6.065886] pva 16800000.pva1: Adding to iommu group 23 [ 6.084282] pva 16800000.pva1: initialized [ 6.089534] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.101792] nvdla 15880000.nvdla0: initialized [ 6.103048] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.111218] nvdla 158c0000.nvdla1: initialized [ 6.113487] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.113743] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.114028] tegradccommon 15200000.display-hub: dma mapping done [ 6.115688] tegradc 15200000.display: Adding to iommu group 26 [ 6.123171] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.123607] generic_infoframe_type: 0x87 [ 6.123908] tegradc 15200000.display: DT parsed successfully [ 6.124219] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.125465] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.126729] tegradc 15210000.display: Adding to iommu group 26 [ 6.130676] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.143951] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.149030] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.149120] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.156565] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.162825] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.170830] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.184267] tegra_cec 3960000.tegra_cec: probed [ 6.184682] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.189894] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.194805] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.207261] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.209149] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.224445] kfuse 3830000.kfuse: initialized [ 6.229094] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.229535] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.242255] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.242571] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.248925] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.257897] tegradc 15210000.display: disp0 connected to head1->sor [ 6.262231] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.268414] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.278482] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.284181] tegradc 15210000.display: DT parsed successfully [ 6.290309] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.295175] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.305384] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.318648] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.337875] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.338251] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.341927] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.349843] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.358848] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.365231] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.372953] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.380192] usb usb1: Product: xHCI Host Controller [ 6.384906] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.391468] usb usb1: SerialNumber: 3610000.xhci [ 6.397056] hub 1-0:1.0: USB hub found [ 6.399731] hub 1-0:1.0: 4 ports detected [ 6.404490] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.409420] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.416759] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.424704] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.432331] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.439579] usb usb2: Product: xHCI Host Controller [ 6.444811] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.451038] usb usb2: SerialNumber: 3610000.xhci [ 6.456275] hub 2-0:1.0: USB hub found [ 6.459219] hub 2-0:1.0: 4 ports detected [ 6.498197] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.503287] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.504560] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.504752] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.517606] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.518665] tegra194-cpufreq ccplex: probed with BWMGR [ 6.519833] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.520517] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.520973] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.522264] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.534539] mmc0: CQHCI version 5.10 [ 6.536226] tegra194-vi5 15c10000.vi: initialized [ 6.538079] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.539490] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.543152] generic_infoframe_type: 0x87 [ 6.549798] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.553266] tegradc 15200000.display: DT parsed successfully [ 6.561398] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.564325] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.567165] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.573699] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.582097] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.589109] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.595920] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.595929] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.604512] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.610969] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.624385] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.627249] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.633310] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.639606] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.645981] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.650749] mmc0: Command Queue Engine enabled [ 6.650753] mmc0: periodic cache flush enabled [ 6.650766] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.651249] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.651389] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.653344] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.655333] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.660337] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.660443] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.660487] -->macsec_probe() [ 6.660490] <--macsec_probe() [ 6.660494] nvethernet 2490000.ethernet: Macsec not supported [ 6.661757] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.662950] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.663062] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.663174] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.664256] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.665820] tegra-se-nvhost 15810000.se: initialized [ 6.669352] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.670918] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.680611] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.680614] ************************************** [ 6.680617] CPU:0, Error:cbb-noc [ 6.680620] Error Logger : 0 [ 6.680629] ErrLog0 : 0x80030000 [ 6.680632] Transaction Type : RD - Read, Incrementing [ 6.680635] Error Code : SLV [ 6.680637] Error Source : Target [ 6.680640] Error Description : Target error detected by CBB slave [ 6.680649] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.680656] Packet header Lock : 0 [ 6.680658] Packet header Len1 : 3 [ 6.680661] NOC protocol version : version >= 2.7 [ 6.680663] ErrLog1 : 0x352420 [ 6.680666] ErrLog2 : 0x0 [ 6.680669] RouteId : 0x352420 [ 6.680672] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.680675] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.680678] TargSubRange : 18 [ 6.680680] SeqId : 0 [ 6.680683] ErrLog3 : 0x4045c [ 6.680685] ErrLog4 : 0x0 [ 6.680689] Address accessed : 0x15b4045c [ 6.680692] ErrLog5 : 0x809f851 [ 6.680695] Non-Modify : 0x1 [ 6.680699] AXI ID : 0x10 [ 6.680702] Master ID : CCPLEX [ 6.680704] Security Group(GRPSEC): 0x7e [ 6.680708] Cache : 0x1 -- Bufferable [ 6.680711] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.680713] FALCONSEC : 0x0 [ 6.680716] Virtual Queuing Channel(VQC): 0x0 [ 6.680720] ************************************** [ 6.680757] ------------[ cut here ]------------ [ 6.681345] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.685410] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.685416] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.685421] Modules linked in: [ 6.685431] CPU: 0 PID: 86 Comm: kworker/0:2 Not tainted 5.10.104-tegra #1 [ 6.685438] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.978113] Workqueue: usb_hub_wq hub_event [ 6.982300] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.988082] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 6.993063] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 6.997441] sp : ffff800010003b30 [ 7.001028] x29: ffff800010003b30 x28: 0000000000000001 [ 7.006466] x27: 0000000000000005 x26: ffffd092c73b3f58 [ 7.011528] x25: ffffd092c7d0ce10 x24: 0000000000000001 [ 7.016865] x23: ffffd092c76a7000 x22: ffffd092c7b2ea00 [ 7.022635] x21: 000000000000000f x20: ffff10a600e66e80 [ 7.028061] x19: ffffd092c7b2ea00 x18: 0000000000000020 [ 7.033399] x17: ffffd092c745d008 x16: 000000003061d8f8 [ 7.038910] x15: ffff10a60100bf70 x14: ffffffffffffffff [ 7.044448] x13: ffffd092c7cbade8 x12: ffffd092c7cbaa2d [ 7.049937] x11: 0000000000000038 x10: 0101010101010101 [ 7.055448] x9 : ffff800010003a40 x8 : 2a2a2a2a2a2a2a2a [ 7.060962] x7 : 2a2a2a2a2a2a2a2a x6 : 000000002af773ba [ 7.066474] x5 : 000000000000000c x4 : 00000000fffff2b0 [ 7.071902] x3 : 00000000ffffffff x2 : ffffd092c5e4e090 [ 7.077235] x1 : ffff10a60100ba00 x0 : 0000000100010101 [ 7.082574] Call trace: [ 7.084770] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.089332] __handle_irq_event_percpu+0x68/0x2a0 [ 7.093864] handle_irq_event_percpu+0x40/0xa0 [ 7.098085] handle_irq_event+0x50/0xf0 [ 7.102088] handle_fasteoi_irq+0xc0/0x170 [ 7.105872] generic_handle_irq+0x40/0x60 [ 7.110138] __handle_domain_irq+0x70/0xd0 [ 7.114081] efi_header_end+0xb0/0xf0 [ 7.117580] el1_irq+0xd0/0x180 [ 7.120813] __do_softirq+0xb4/0x3e8 [ 7.124247] irq_exit+0xc0/0xe0 [ 7.127206] __handle_domain_irq+0x74/0xd0 [ 7.131503] efi_header_end+0xb0/0xf0 [ 7.134904] el1_irq+0xd0/0x180 [ 7.138138] mutex_spin_on_owner+0x9c/0xe0 [ 7.141908] __mutex_lock.isra.0+0xbc/0x560 [ 7.146362] __mutex_lock_slowpath+0x28/0x40 [ 7.150475] mutex_lock+0x60/0x70 [ 7.153630] hub_event+0x834/0x1300 [ 7.157477] process_one_work+0x1c4/0x4a0 [ 7.161675] worker_thread+0x54/0x430 [ 7.165092] kthread+0x148/0x170 [ 7.168675] ret_from_fork+0x10/0x24 [ 7.172281] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.178137] ---[ end trace 01e8cd393d94199b ]--- [ 7.183023] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.190549] SMP: stopping secondary CPUs [ 7.194242] Kernel Offset: 0x5092b5c90000 from 0xffff800010000000 [ 7.200439] PHYS_OFFSET: 0xffffef5b00000000 [ 7.204899] CPU features: 0x8240002,03802a30 [ 7.209272] Memory Limit: none [ 7.212428] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: Thÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized entering main console loop ] bpmp: init complete ÿäis OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.612] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.619] E> invalid display type [0003.620] E> cannot find any other nvdisp nodes [0003.636] I> edid read success [0003.649] I> edid read success [0003.649] I> width = 640, height = 480, frequency = 25174825 [0003.649] I> width = 1920, height = 1080, frequency = 148500000 [0003.650] I> width = 1280, height = 768, frequency = 79500000 [0003.650] I> width = 1360, height = 768, frequency = 85500000 [0003.650] I> width = 720, height = 480, frequency = 26973026 [0003.654] I> width = 720, height = 576, frequency = 26973026 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 720, height = 480, frequency = 26973026 [0003.688] I> width = 720, height = 576, frequency = 26973026 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 4096, height = 2160, frequency = 296703296 [0003.723] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.734] I> hdmi_enable, starting HDMI initialisation [0003.739] I> hdmi_enable, HDMI initialisation complete [0003.748] initializing target [0003.749] calling apps_init() [0003.750] starting app kernel_boot_app [0003.750] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.001959] Console: colour dummy device 80x25 [ 0.003434] printk: console [tty0] enabled [ 0.003510] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.003545] pid_max: default: 32768 minimum: 301 [ 0.003746] LSM: Security Framework initializing [ 0.003804] Yama: becoming mindful. [ 0.003844] SELinux: Initializing. [ 0.003995] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.004034] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.007086] rcu: Hierarchical SRCU implementation. [ 0.007338] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.008415] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.008478] DTB Build time: Aug 10 2022 20:31:49 [ 0.013081] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.013457] Remapping and enabling EFI services. [ 0.015395] smp: Bringing up secondary CPUs ... [ 0.044914] Detected PIPT I-cache on CPU1 [ 0.044992] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075232] Detected PIPT I-cache on CPU2 [ 0.075333] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104936] Detected PIPT I-cache on CPU3 [ 0.105028] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134745] Detected PIPT I-cache on CPU4 [ 0.134846] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164413] Detected PIPT I-cache on CPU5 [ 0.164483] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164804] smp: Brought up 1 node, 6 CPUs [ 0.165125] SMP: Total of 6 processors activated. [ 0.165203] CPU features: detected: Privileged Access Never [ 0.165231] CPU features: detected: LSE atomic instructions [ 0.165249] CPU features: detected: User Access Override [ 0.165268] CPU features: detected: 32-bit EL0 Support [ 0.165285] CPU features: detected: RAS Extension Support [ 0.165302] CPU features: detected: CRC32 instructions [ 0.165319] CPU features: detected: 32-bit EL1 Support [ 0.234406] CPU: All CPU(s) started at EL2 [ 0.239779] devtmpfs: initialized [ 0.287426] Registered cp15_barrier emulation handler [ 0.287556] Registered setend emulation handler [ 0.287607] KASLR enabled [ 0.287825] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287861] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289161] pinctrl core: initialized pinctrl subsystem [ 0.290121] SMBIOS 3.0.0 present. [ 0.290166] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.290828] NET: Registered protocol family 16 [ 0.292700] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293199] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293945] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294018] audit: initializing netlink subsys (disabled) [ 0.294305] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.294692] thermal_sys: Registered thermal governor 'step_wise' [ 0.294698] thermal_sys: Registered thermal governor 'power_allocator' [ 0.294718] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.296857] cpuidle: using governor menu [ 0.297112] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297570] ASID allocator initialised with 32768 entries [ 0.297808] Serial: AMBA PL011 UART driver [ 0.302318] Tegra reboot handler registered. [ 0.367905] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.368028] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.368242] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.368289] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.368408] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.368454] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.368609] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.368653] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.368786] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.368828] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.371178] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.371224] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.371256] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.371287] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.371320] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.371349] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.371379] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.371409] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.371438] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.371467] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.371514] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.371544] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.371596] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.371626] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.371655] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.371700] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.371732] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.371894] mc-err: mcerr ops are set to t19x [ 0.382871] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.382925] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.382944] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.382961] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.391160] ACPI: Interpreter disabled. [ 0.392707] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.394527] iommu: Default domain type: Translated [ 0.394609] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.395173] SCSI subsystem initialized [ 0.395413] usbcore: registered new interface driver usbfs [ 0.395473] usbcore: registered new interface driver hub [ 0.395533] usbcore: registered new device driver usb [ 0.396072] mc: Linux media interface: v0.10 [ 0.396116] videodev: Linux video capture interface: v2.00 [ 0.396583] pps_core: LinuxPPS API ver. 1 registered [ 0.396610] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.396648] PTP clock support registered [ 0.396952] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.397320] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.397424] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.398230] Registered efivars operations [ 0.406347] FPGA manager framework [ 0.406510] Advanced Linux Sound Architecture Driver Initialized. [ 0.407355] Bluetooth: Core ver 2.22 [ 0.407441] NET: Registered protocol family 31 [ 0.407460] Bluetooth: HCI device and connection manager initialized [ 0.407489] Bluetooth: HCI socket layer initialized [ 0.407535] Bluetooth: L2CAP socket layer initialized [ 0.407587] Bluetooth: SCO socket layer initialized [ 0.409879] camchar: rtcpu character device driver loaded [ 0.410861] clocksource: Switched to clocksource arch_sys_counter [ 0.810556] VFS: Disk quotas dquot_6.6.0 [ 0.810658] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.811207] pnp: PnP ACPI: disabled [ 0.824454] la/ptsa driver initialized. [ 0.824612] NET: Registered protocol family 2 [ 0.824819] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.832786] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.832970] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.833328] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.833954] TCP: Hash tables configured (established 65536 bind 65536) [ 0.834120] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.834250] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.834574] NET: Registered protocol family 1 [ 0.835554] RPC: Registered named UNIX socket transport module. [ 0.835582] RPC: Registered udp transport module. [ 0.835597] RPC: Registered tcp transport module. [ 0.835612] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.835637] PCI: CLS 0 bytes, default 64 [ 0.835950] Trying to unpack rootfs image as initramfs... [ 1.105720] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.109005] Freeing initrd memory: 8196K [ 1.113740] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.113783] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.113825] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.114153] kvm [1]: IPA Size Limit: 40 bits [ 1.114638] kvm [1]: vgic interrupt IRQ9 [ 1.115154] kvm [1]: VHE mode initialized successfully [ 1.116615] Initialise system trusted keyrings [ 1.116937] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.122262] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.123193] NFS: Registering the id_resolver key type [ 1.123233] Key type id_resolver registered [ 1.123249] Key type id_legacy registered [ 1.123340] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.123367] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.123441] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.133164] NET: Registered protocol family 38 [ 1.133188] Key type asymmetric registered [ 1.133243] Asymmetric key parser 'x509' registered [ 1.133304] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.133570] io scheduler mq-deadline registered [ 1.133590] io scheduler kyber registered [ 1.139567] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.142681] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.142766] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.142904] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.143010] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.143085] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.148565] scrncapt: init (heads:4 wins:6 planes:4) [ 1.148898] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.149870] EINJ: ACPI disabled. [ 1.153508] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.153535] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.153549] tegra-pmc: ### PMC reset level: L1 [ 1.153563] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.153616] tegra-pmc: PMC Prod config success [ 1.159283] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.164674] random: fast init done [ 1.165563] printk: console [ttyTCU0] enabled [ 2.716926] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.721303] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.726059] arm-smmu 10000000.iommu: stage 1 translation [ 2.731544] arm-smmu 10000000.iommu: stage 2 translation [ 2.736802] arm-smmu 10000000.iommu: nested translation [ 2.742161] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.749313] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.759868] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.762675] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.769281] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.777361] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.782554] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.787280] arm-smmu 12000000.iommu: stage 1 translation [ 2.792532] arm-smmu 12000000.iommu: stage 2 translation [ 2.798248] arm-smmu 12000000.iommu: nested translation [ 2.803648] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.810564] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.821175] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.823683] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.830500] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.837939] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.847738] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.850636] tegra_profiler: auth: init [ 2.855018] THERMAL EST: found 3 subdevs [ 2.858311] THERMAL EST num_resources: 0 [ 2.862186] [THERMAL EST subdev 0] [ 2.865764] [THERMAL EST subdev 1] [ 2.868916] [THERMAL EST subdev 2] [ 2.872422] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.878613] THERMAL EST: thz register success. [ 2.882899] THERMAL EST: end of probe, return err: 0 [ 2.888445] nvsciipc: loaded module [ 2.895647] tun: Universal TUN/TAP device driver, 1.6 [ 2.898016] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.904188] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.909551] e1000e: Intel(R) PRO/1000 Network Driver [ 2.914682] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.920491] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.926049] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.932313] PPP generic driver version 2.4.2 [ 2.936274] PPP BSD Compression module registered [ 2.941031] PPP Deflate Compression module registered [ 2.946018] PPP MPPE Compression module registered [ 2.951286] usbcore: registered new interface driver r8152 [ 2.956549] usbcore: registered new interface driver asix [ 2.962135] usbcore: registered new interface driver ax88179_178a [ 2.968007] usbcore: registered new interface driver cdc_ether [ 2.974202] usbcore: registered new interface driver net1080 [ 2.979806] usbcore: registered new interface driver cdc_subset [ 2.985590] usbcore: registered new interface driver zaurus [ 2.991283] usbcore: registered new interface driver cdc_ncm [ 2.997243] usbcore: registered new interface driver aqc111 [ 3.002882] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.008675] ohci-pci: OHCI PCI platform driver [ 3.013230] ohci-platform: OHCI generic platform driver [ 3.019159] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.025457] usbcore: registered new interface driver uas [ 3.029305] usbcore: registered new interface driver usb-storage [ 3.035492] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.041688] mousedev: PS/2 mouse device common for all mice [ 3.046683] usbcore: registered new interface driver xpad [ 3.054453] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.057177] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.065216] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.071489] i2c /dev entries driver [ 3.075139] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.080968] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.086385] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.091665] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.097010] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.102226] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.107856] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.122450] device-mapper: uevent: version 1.0.3 [ 3.122976] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.128346] cpuidle: Initializing cpuidle driver [ 3.132380] sdhci: Secure Digital Host Controller Interface driver [ 3.136779] sdhci: Copyright(c) Pierre Ossman [ 3.141128] Synopsys Designware Multimedia Card Interface Driver [ 3.147335] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.153414] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.154218] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.166641] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.188772] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.198273] vdd-1v0: supplied by regulator-dummy [ 3.203814] vdd-1v8-hs: supplied by regulator-dummy [ 3.208595] vdd-1v8-ls: supplied by regulator-dummy [ 3.213402] vdd-1v8-ao: supplied by regulator-dummy [ 3.217404] vddio-ddr-1v1: supplied by regulator-dummy [ 3.221826] vdd-rtc: supplied by regulator-dummy [ 3.223691] spmic-ldo1: supplied by regulator-dummy [ 3.224954] vdd-ao-3v3: supplied by regulator-dummy [ 3.231173] vddio-emmc-3v3: supplied by regulator-dummy [ 3.237559] spmic-ldo4: supplied by regulator-dummy [ 3.238794] vdd-usb-3v3: supplied by regulator-dummy [ 3.245224] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.251485] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.257280] spmic-ldo8: supplied by vdd-1v8-ls [ 3.258776] gpio-510 (gpio_default): hogged as output/high [ 3.260241] gpio-511 (gpio_default): hogged as output/high [ 3.263210] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.399499] max77686-rtc max77620-rtc: registered as rtc0 [ 3.400836] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.401190] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.237253] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.238649] hid: raw HID events driver (C) Jiri Kosina [ 4.239389] usbcore: registered new interface driver usbhid [ 4.239537] usbhid: USB HID core driver [ 4.241384] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.242492] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.039388] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.113961] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.382 ms) ÿá[ 4.327542] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.328115] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.329095] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.329744] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.331789] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.332425] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.332969] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.334185] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.334437] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.336634] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.343276] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.350173] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.355120] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.360982] denver_knobs_init:MTS_VERSION:55637613 [ 4.374368] t19x_cache tegra-cache: probed [ 4.377214] optee: probing for conduit method. [ 4.378048] optee: revision 3.16 (65cc2218) [ 4.379070] optee: dynamic shared memory is enabled [ 4.381934] optee: initialized driver [ 4.390782] nvpmodel: initialized successfully [ 4.391748] tegra_hv: get_hvd: not initialized yet [ 4.394250] user_ivc_mempool: hypervisor not present [ 4.400854] usbcore: registered new interface driver snd-usb-audio [ 4.407438] u32 classifier [ 4.408320] input device check on [ 4.412110] Actions configured [ 4.415411] Initializing XFRM netlink socket [ 4.420487] NET: Registered protocol family 10 [ 4.426726] Segment Routing with IPv6 [ 4.428044] NET: Registered protocol family 17 [ 4.432184] NET: Registered protocol family 15 [ 4.436354] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.450255] Bluetooth: RFCOMM socket layer initialized [ 4.455007] Bluetooth: RFCOMM ver 1.11 [ 4.458496] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.464374] Bluetooth: HIDP socket layer initialized [ 4.470141] 9pnet: Installing 9P2000 support [ 4.473798] Key type dns_resolver registered [ 4.479431] registered taskstats version 1 [ 4.482470] Loading compiled-in X.509 certificates [ 4.494483] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.498964] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.508699] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.510473] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.518806] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.527394] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.642878] tegra194-pcie 14160000.pcie: Link up [ 4.645587] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.645813] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.646030] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.646312] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.646514] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.646974] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.647413] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.657315] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.657790] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.658217] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.659878] pci 0004:01:00.0: supports D1 D2 [ 4.660061] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.669301] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.669781] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.670038] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.670439] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.670785] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.671448] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.677516] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.685082] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.693337] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.703928] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.708269] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.713971] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.721007] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.729663] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.731558] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.739750] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.748590] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.854936] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.855467] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.855737] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.855885] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.856158] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.856355] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.856745] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.857141] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.873223] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.873536] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.875407] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.876428] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.877782] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.879324] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.880115] pci 0005:00:00.0: Removing from iommu group 7 [ 5.880345] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.911905] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.933868] host1x 13e10000.host1x: initialized [ 5.935628] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.936630] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.937768] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.938581] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.939651] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.940288] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.941218] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.941772] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.947941] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.955370] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.964999] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.972125] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.981779] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.989120] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.999342] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.006173] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.016010] falcon 15340000.vic: Adding to iommu group 17 [ 6.030323] falcon 15340000.vic: initialized [ 6.031366] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.036508] falcon 15380000.nvjpg: initialized [ 6.037139] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.049021] falcon 154c0000.nvenc: initialized [ 6.049631] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.059453] falcon 15a80000.nvenc1: initialized [ 6.060076] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.070492] nvdec 15480000.nvdec: initialized [ 6.071073] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.080313] nvdec 15140000.nvdec1: initialized [ 6.080933] tsec 15500000.tsec: Adding to iommu group 18 [ 6.086686] tsec 15500000.tsec: initialized [ 6.087369] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.096382] tsec 15100000.tsecb: initialized [ 6.100738] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.125045] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.137295] gpio-374 (wifi-enable): hogged as output/high [ 6.137614] gpio-431 (camera-control-output-low): hogged as output/low [ 6.137897] gpio-432 (camera-control-output-low): hogged as output/low [ 6.139555] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.141304] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.141862] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.147307] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.152671] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.158265] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.163600] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.172266] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.179611] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.191195] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.196105] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.201939] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.210795] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.220375] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.227428] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.235124] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.241207] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.251162] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.257034] pva 16000000.pva0: Adding to iommu group 22 [ 6.283813] pva 16000000.pva0: initialized [ 6.288946] pva 16800000.pva1: Adding to iommu group 23 [ 6.299468] pva 16800000.pva1: initialized [ 6.304122] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.316785] nvdla 15880000.nvdla0: initialized [ 6.318026] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.326116] nvdla 158c0000.nvdla1: initialized [ 6.328739] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.328978] tegradc 15200000.display: Adding to iommu group 26 [ 6.329019] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.329654] tegradccommon 15200000.display-hub: dma mapping done [ 6.337204] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.337637] generic_infoframe_type: 0x87 [ 6.337867] tegradc 15200000.display: DT parsed successfully [ 6.338197] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.347289] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.348576] tegradc 15210000.display: Adding to iommu group 26 [ 6.353170] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.364568] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.366351] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.371212] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.378701] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.378707] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.379548] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.384401] tegra_cec 3960000.tegra_cec: probed [ 6.385007] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.393089] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.400993] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.409222] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.413054] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.421951] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.423895] kfuse 3830000.kfuse: initialized [ 6.430462] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.441106] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.449274] tegradc 15210000.display: disp0 connected to head1->sor [ 6.453808] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.454576] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.458576] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.478563] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.485131] tegradc 15210000.display: DT parsed successfully [ 6.492612] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.498005] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.527250] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.536526] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.541327] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.560980] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.561407] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.564701] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.573499] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.581823] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.588574] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.595832] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.603236] usb usb1: Product: xHCI Host Controller [ 6.607930] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.613759] random: crng init done [ 6.614385] usb usb1: SerialNumber: 3610000.xhci [ 6.623677] hub 1-0:1.0: USB hub found [ 6.626275] hub 1-0:1.0: 4 ports detected [ 6.631070] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.635870] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.643215] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.650948] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.659049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.666035] usb usb2: Product: xHCI Host Controller [ 6.671187] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.677393] usb usb2: SerialNumber: 3610000.xhci [ 6.683077] hub 2-0:1.0: USB hub found [ 6.685925] hub 2-0:1.0: 4 ports detected [ 6.726326] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.731973] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.733197] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.733377] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.746602] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.747773] tegra194-cpufreq ccplex: probed with BWMGR [ 6.749108] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.749564] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.750098] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.751226] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.760738] mmc0: CQHCI version 5.10 [ 6.760963] tegra194-vi5 15c10000.vi: initialized [ 6.764504] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.765859] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.769589] generic_infoframe_type: 0x87 [ 6.776282] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.779789] tegradc 15200000.display: DT parsed successfully [ 6.787874] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.793437] tegradc 15200000.display: Display dc.000000002caa0363 registered with id=0 [ 6.800178] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.809203] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.814684] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.814689] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.822385] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.822863] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.822870] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.822876] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.822909] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.822914] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.823453] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.824362] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.824411] nvethernet 2490000.ethernet: Macsec not supported [ 6.825706] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.826957] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.827072] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.827182] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.828246] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.829899] tegra-se-nvhost 15810000.se: initialized [ 6.836035] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.836235] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.848791] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.851319] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.857474] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.863701] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.872646] tegra-se-nvhost 15820000.se: initialized [ 6.882126] tegradc 15200000.display: probed [ 6.888448] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.894862] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.900337] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.011567] Console: switching to colour frame buffer device 240x67 [ 7.017575] tegradc 15200000.display: fb registered [ 7.022759] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.028402] tegra-se-nvhost 15830000.se: initialized [ 7.029158] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.034276] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.039355] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.045749] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.058072] tegra-se-nvhost 15840000.se: initialized [ 7.064307] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.068078] mmc0: Command Queue Engine enabled [ 7.070084] tegra_actmon d230000.actmon: in actmon_register()... [ 7.072737] mmc0: periodic cache flush enabled [ 7.078771] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.083333] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.086490] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.086497] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.086500] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.086504] usb 1-2: Manufacturer: Generic [ 7.088566] hub 1-2:1.0: USB hub found [ 7.091045] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.091906] hvc_sysfs: hypervisor is not present [ 7.095586] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.105094] hub 1-2:1.0: 4 ports detected [ 7.105720] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.110997] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.119289] ALSA device list: [ 7.121209] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.123491] No soundcards found. [ 7.175708] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.182333] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.183705] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.198043] Extcon AUX1(HDMI) enable [ 7.201835] tegradc 15210000.display: disp1 connected to head1->sor [ 7.208183] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.211744] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.214972] tegradc 15210000.display: DT parsed successfully [ 7.228522] tegradc 15210000.display: Display dc.0000000089e3cffe registered with id=1 [ 7.236549] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.242649] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.255754] tegradc 15210000.display: probed [ 7.256087] tegradc 15210000.display: fb registered [ 7.256400] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.261416] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.264854] Freeing unused kernel memory: 3968K [ 7.266402] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.273638] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.273651] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.278349] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.278374] usb 2-3: Manufacturer: Generic [ 7.307792] tegradc 15210000.display: blank - powerdown [ 7.312859] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.319913] hub 2-3:1.0: USB hub found [ 7.321321] Extcon DP: HPD disabled [ 7.326952] hub 2-3:1.0: 4 ports detected [ 7.328743] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.331053] Run /init as init process [ 7.343119] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.343125] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.355765] tegradc 15200000.display: blank - powerdown [ 7.378858] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.389539] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.389545] Extcon AUX1(HDMI) disable [ 7.410176] Root device found: mmcblk0p1 [ 7.412563] Found dev node: /dev/mmcblk0p1 [ 7.413087] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.413977] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.426851] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.426857] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.427754] tegradc 15200000.display: unblank [ 7.428854] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.429052] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.435507] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.437380] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.441439] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.441443] Extcon AUX1(HDMI) enable [ 7.447768] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.452122] Rootfs mounted over mmcblk0p1 [ 7.454175] tegradc 15200000.display: sync windows ret = 247 [ 7.491141] Switching from initrd to actual rootfs [ 7.494148] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.495714] Extcon HDMI: HPD enabled [ 7.498867] tegradc 15200000.display: hdmi: plugged [ 7.528095] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.529536] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.530946] usb 1-3: Product: Bluetooth Radio [ 7.532269] usb 1-3: Manufacturer: Realtek [ 7.533572] usb 1-3: SerialNumber: 00e04c000001 [ 7.646363] systemd[1]: System time before build time, advancing clock. [ 7.716832] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.721800] systemd[1]: Detected architecture arm64. [ 7.754537] systemd[1]: Set hostname to . [ 7.924622] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.273034] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.274755] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.280438] systemd[1]: Created slice system-modprobe.slice. [ 8.285298] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.289526] systemd[1]: Created slice User and Session Slice. [ 8.293002] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.297160] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.300648] systemd[1]: Reached target User and Group Name Lookups. [ 8.303902] systemd[1]: Reached target Slices. [ 8.307024] systemd[1]: Reached target Swap. [ 8.310972] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.314580] systemd[1]: Listening on Syslog Socket. [ 8.318137] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.321517] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.325735] systemd[1]: Listening on Journal Audit Socket. [ 8.329429] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.333208] systemd[1]: Listening on Journal Socket. [ 8.338181] systemd[1]: Listening on udev Control Socket. [ 8.343118] systemd[1]: Listening on udev Kernel Socket. [ 8.351518] systemd[1]: Mounting Huge Pages File System... [ 8.360233] systemd[1]: Mounting POSIX Message Queue File System... [ 8.368403] systemd[1]: Mounting RPC Pipe File System... [ 8.377002] systemd[1]: Mounting Kernel Debug File System... [ 8.385791] systemd[1]: Mounting Kernel Trace File System... [ 8.396117] systemd[1]: Starting Journal Service... [ 8.405187] systemd[1]: Starting Set the console keyboard layout... [ 8.413377] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.416861] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.423371] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.431918] systemd[1]: Started Nameserver information manager. [ 8.436704] systemd[1]: Reached target Network (Pre). [ 8.443933] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.445811] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.453958] systemd[1]: Starting Load Kernel Modules... [ 8.461911] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.470917] systemd[1]: Starting udev Coldplug all Devices... [ 8.481128] systemd[1]: Mounted Huge Pages File System. [ 8.485001] systemd[1]: Mounted POSIX Message Queue File System. [ 8.488802] systemd[1]: Mounted RPC Pipe File System. [ 8.491579] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.496652] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.497651] systemd[1]: Mounted Kernel Debug File System. [ 8.498585] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.501230] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.501245] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.501255] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.506089] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.506290] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.506298] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.507616] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.513914] systemd[1]: Mounted Kernel Trace File System. [ 8.526954] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.532352] systemd[1]: nvfb-udev.service: Succeeded. [ 8.536863] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.547789] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.559967] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.561772] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.569524] systemd[1]: Starting Load/Save Random Seed... [ 8.577662] systemd[1]: Starting Create System Users... [ 8.614504] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.614504] [ 8.627184] systemd[1]: Finished Load/Save Random Seed. [ 8.641085] systemd[1]: Finished Create System Users. [ 8.648629] systemd[1]: Finished Load Kernel Modules. [ 8.653100] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.660203] systemd[1]: Mounting Kernel Configuration File System... [ 8.668376] systemd[1]: Started OP-TEE Client Supplicant. [ 8.677216] systemd[1]: Starting Apply Kernel Variables... [ 8.686250] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.696774] systemd[1]: Finished Set the console keyboard layout. [ 8.701214] systemd[1]: Mounted Kernel Configuration File System. [ 10.194583] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.199790] imx219 9-0010: board setup failed [ 10.199907] imx219: probe of 9-0010 failed with error -121 [ 10.211080] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.218647] imx219 10-0010: board setup failed [ 10.220221] imx219: probe of 10-0010 failed with error -121 [ 10.304161] hot-surface-alert cooling state: 0 -> 1 [ 11.164705] using random self ethernet address [ 11.165979] using random host ethernet address [ 11.660545] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.661903] Creating 1 MTD partitions on "spi6.0": [ 11.663178] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.399268] using random self ethernet address [ 12.400496] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.803783] nvidia: loading out-of-tree module taints kernel. [ 60.036626] watchdog: watchdog0: watchdog did not stop! [ 60.517237] Trying to unregister non-registered hwtime source [ 63.579174] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.580813] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] tiÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.358] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuratioÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿän might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.420] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.486] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.609] W> set volts not configured for 'vdd-1v0' [0003.614] W> set volts not configured for 'vdd-1v8-hs' [0003.615] I> retrieved tmds range from prod_list_hdmi_soc [0003.621] E> invalid display type [0003.623] E> cannot find any other nvdisp nodes [0003.639] I> edid read success [0003.652] I> edid read success [0003.652] I> width = 640, height = 480, frequency = 25174825 [0003.652] I> width = 1920, height = 1080, frequency = 148500000 [0003.653] I> width = 1280, height = 768, frequency = 79500000 [0003.653] I> width = 1360, height = 768, frequency = 85500000 [0003.653] I> width = 720, height = 480, frequency = 26973026 [0003.657] I> width = 720, height = 576, frequency = 26973026 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.686] I> width = 720, height = 480, frequency = 26973026 [0003.691] I> width = 720, height = 576, frequency = 26973026 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 4096, height = 2160, frequency = 296703296 [0003.726] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.737] I> hdmi_enable, starting HDMI initialisation [0003.742] I> hdmi_enable, HDMI initialisation complete [0003.751] initializing target [0003.752] calling apps_init() [0003.752] starting app kernel_boot_app [0003.753] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000702] Console: colour dummy device 80x25 [ 0.002257] printk: console [tty0] enabled [ 0.002318] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002355] pid_max: default: 32768 minimum: 301 [ 0.002543] LSM: Security Framework initializing [ 0.002616] Yama: becoming mindful. [ 0.002674] SELinux: Initializing. [ 0.002841] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002881] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005841] rcu: Hierarchical SRCU implementation. [ 0.006160] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006830] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006902] DTB Build time: Aug 10 2022 20:31:49 [ 0.009630] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009878] Remapping and enabling EFI services. [ 0.011886] smp: Bringing up secondary CPUs ... [ 0.042177] Detected PIPT I-cache on CPU1 [ 0.042514] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072113] Detected PIPT I-cache on CPU2 [ 0.072190] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101779] Detected PIPT I-cache on CPU3 [ 0.101930] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131669] Detected PIPT I-cache on CPU4 [ 0.131747] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161458] Detected PIPT I-cache on CPU5 [ 0.161532] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161904] smp: Brought up 1 node, 6 CPUs [ 0.162215] SMP: Total of 6 processors activated. [ 0.162260] CPU features: detected: Privileged Access Never [ 0.162287] CPU features: detected: LSE atomic instructions [ 0.162305] CPU features: detected: User Access Override [ 0.162323] CPU features: detected: 32-bit EL0 Support [ 0.162341] CPU features: detected: RAS Extension Support [ 0.162360] CPU features: detected: CRC32 instructions [ 0.162378] CPU features: detected: 32-bit EL1 Support [ 0.227171] CPU: All CPU(s) started at EL2 [ 0.232795] devtmpfs: initialized [ 0.284308] Registered cp15_barrier emulation handler [ 0.284422] Registered setend emulation handler [ 0.284446] KASLR enabled [ 0.284744] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.284777] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286592] pinctrl core: initialized pinctrl subsystem [ 0.287675] SMBIOS 3.0.0 present. [ 0.287710] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288366] NET: Registered protocol family 16 [ 0.290583] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291107] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291881] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291955] audit: initializing netlink subsys (disabled) [ 0.292267] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292676] thermal_sys: Registered thermal governor 'step_wise' [ 0.292685] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292708] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294785] cpuidle: using governor menu [ 0.295086] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295632] ASID allocator initialised with 32768 entries [ 0.295932] Serial: AMBA PL011 UART driver [ 0.299574] Tegra reboot handler registered. [ 0.362828] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.362974] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.363172] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.363223] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.363352] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.363423] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.363590] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.363640] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.363781] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.363834] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.366182] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.366222] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.366254] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.366316] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.366350] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.366381] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.366411] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.366442] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.366490] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.366522] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.366566] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.366596] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.366642] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.366673] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.366703] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.366733] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.366763] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.366867] mc-err: mcerr ops are set to t19x [ 0.378286] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.378322] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.378371] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.378389] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.386062] ACPI: Interpreter disabled. [ 0.387349] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.388706] iommu: Default domain type: Translated [ 0.388768] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.389118] SCSI subsystem initialized [ 0.389282] usbcore: registered new interface driver usbfs [ 0.389345] usbcore: registered new interface driver hub [ 0.389384] usbcore: registered new device driver usb [ 0.389801] mc: Linux media interface: v0.10 [ 0.389830] videodev: Linux video capture interface: v2.00 [ 0.390153] pps_core: LinuxPPS API ver. 1 registered [ 0.390172] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.390201] PTP clock support registered [ 0.390488] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.390830] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.390930] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.391580] Registered efivars operations [ 0.396987] FPGA manager framework [ 0.397115] Advanced Linux Sound Architecture Driver Initialized. [ 0.397673] Bluetooth: Core ver 2.22 [ 0.397715] NET: Registered protocol family 31 [ 0.397731] Bluetooth: HCI device and connection manager initialized [ 0.397753] Bluetooth: HCI socket layer initialized [ 0.397774] Bluetooth: L2CAP socket layer initialized [ 0.397800] Bluetooth: SCO socket layer initialized [ 0.399398] camchar: rtcpu character device driver loaded [ 0.400012] clocksource: Switched to clocksource arch_sys_counter [ 0.692021] VFS: Disk quotas dquot_6.6.0 [ 0.692110] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.692457] pnp: PnP ACPI: disabled [ 0.703884] la/ptsa driver initialized. [ 0.704057] NET: Registered protocol family 2 [ 0.704247] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.709496] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.709576] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.709881] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.710324] TCP: Hash tables configured (established 65536 bind 65536) [ 0.710460] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.710565] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.710795] NET: Registered protocol family 1 [ 0.711452] RPC: Registered named UNIX socket transport module. [ 0.711472] RPC: Registered udp transport module. [ 0.711486] RPC: Registered tcp transport module. [ 0.711500] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.711537] PCI: CLS 0 bytes, default 64 [ 0.711780] Trying to unpack rootfs image as initramfs... [ 0.893736] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.896362] Freeing initrd memory: 8196K [ 0.900199] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.900246] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.900311] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.900709] kvm [1]: IPA Size Limit: 40 bits [ 0.901250] kvm [1]: vgic interrupt IRQ9 [ 0.901749] kvm [1]: VHE mode initialized successfully [ 0.902960] Initialise system trusted keyrings [ 0.903196] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.906850] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.907518] NFS: Registering the id_resolver key type [ 0.907550] Key type id_resolver registered [ 0.907565] Key type id_legacy registered [ 0.907628] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.907656] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.907691] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.914833] NET: Registered protocol family 38 [ 0.914858] Key type asymmetric registered [ 0.914873] Asymmetric key parser 'x509' registered [ 0.914922] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.915163] io scheduler mq-deadline registered [ 0.915204] io scheduler kyber registered [ 0.919090] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.921201] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.921291] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.921346] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.921398] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.921451] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.925312] scrncapt: init (heads:4 wins:6 planes:4) [ 0.925716] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.926312] EINJ: ACPI disabled. [ 0.928655] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.928683] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.928699] tegra-pmc: ### PMC reset level: L1 [ 0.928719] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.928766] tegra-pmc: PMC Prod config success [ 0.933313] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.937435] random: fast init done [ 0.937501] printk: console [ttyTCU0] enabled [ 2.489965] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.494679] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.498989] arm-smmu 10000000.iommu: stage 1 translation [ 2.504842] arm-smmu 10000000.iommu: stage 2 translation [ 2.510243] arm-smmu 10000000.iommu: nested translation [ 2.515313] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.522746] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.533155] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.535588] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.542450] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.549884] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.555216] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.559962] arm-smmu 12000000.iommu: stage 1 translation [ 2.565736] arm-smmu 12000000.iommu: stage 2 translation [ 2.570912] arm-smmu 12000000.iommu: nested translation [ 2.576323] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.583735] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.593675] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.596603] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.603420] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.610804] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.620352] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.623818] tegra_profiler: auth: init [ 2.627808] THERMAL EST: found 3 subdevs [ 2.631258] THERMAL EST num_resources: 0 [ 2.635378] [THERMAL EST subdev 0] [ 2.638440] [THERMAL EST subdev 1] [ 2.642119] [THERMAL EST subdev 2] [ 2.645091] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.651562] THERMAL EST: thz register success. [ 2.655791] THERMAL EST: end of probe, return err: 0 [ 2.661411] nvsciipc: loaded module [ 2.668397] tun: Universal TUN/TAP device driver, 1.6 [ 2.670827] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.676850] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.682657] e1000e: Intel(R) PRO/1000 Network Driver [ 2.687337] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.693422] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.698969] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.704867] PPP generic driver version 2.4.2 [ 2.709200] PPP BSD Compression module registered [ 2.713962] PPP Deflate Compression module registered [ 2.718938] PPP MPPE Compression module registered [ 2.723949] usbcore: registered new interface driver r8152 [ 2.729462] usbcore: registered new interface driver asix [ 2.734800] usbcore: registered new interface driver ax88179_178a [ 2.741176] usbcore: registered new interface driver cdc_ether [ 2.746864] usbcore: registered new interface driver net1080 [ 2.752464] usbcore: registered new interface driver cdc_subset [ 2.758519] usbcore: registered new interface driver zaurus [ 2.764470] usbcore: registered new interface driver cdc_ncm [ 2.770137] usbcore: registered new interface driver aqc111 [ 2.775765] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.781874] ohci-pci: OHCI PCI platform driver [ 2.786223] ohci-platform: OHCI generic platform driver [ 2.792086] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.798359] usbcore: registered new interface driver uas [ 2.802464] usbcore: registered new interface driver usb-storage [ 2.808378] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.814659] mousedev: PS/2 mouse device common for all mice [ 2.819632] usbcore: registered new interface driver xpad [ 2.827515] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.830354] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.837876] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.844488] i2c /dev entries driver [ 2.847744] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.853770] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.859139] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.864335] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.869859] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.875350] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.880792] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.894197] device-mapper: uevent: version 1.0.3 [ 2.894690] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.900914] cpuidle: Initializing cpuidle driver [ 2.905216] sdhci: Secure Digital Host Controller Interface driver [ 2.909945] sdhci: Copyright(c) Pierre Ossman [ 2.913790] Synopsys Designware Multimedia Card Interface Driver [ 2.919985] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.925945] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.926816] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.939247] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.962724] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.972335] vdd-1v0: supplied by regulator-dummy [ 2.977830] vdd-1v8-hs: supplied by regulator-dummy [ 2.982733] vdd-1v8-ls: supplied by regulator-dummy [ 2.987576] vdd-1v8-ao: supplied by regulator-dummy [ 2.991551] vddio-ddr-1v1: supplied by regulator-dummy [ 2.996101] vdd-rtc: supplied by regulator-dummy [ 2.997912] spmic-ldo1: supplied by regulator-dummy [ 2.999241] vdd-ao-3v3: supplied by regulator-dummy [ 3.005406] vddio-emmc-3v3: supplied by regulator-dummy [ 3.011803] spmic-ldo4: supplied by regulator-dummy [ 3.013077] vdd-usb-3v3: supplied by regulator-dummy [ 3.019266] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.025560] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.031144] spmic-ldo8: supplied by vdd-1v8-ls [ 3.032688] gpio-510 (gpio_default): hogged as output/high [ 3.034074] gpio-511 (gpio_default): hogged as output/high [ 3.037008] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.172693] max77686-rtc max77620-rtc: registered as rtc0 [ 3.173736] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.174111] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.003344] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.004599] hid: raw HID events driver (C) Jiri Kosina [ 4.005378] usbcore: registered new interface driver usbhid [ 4.005537] usbhid: USB HID core driver [ 4.007584] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.009073] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.117085] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.191413] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.776 ms, total boot 75.133 ms) ÿá[ 4.093164] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.093782] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.094701] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.095298] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.096990] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.097646] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.098333] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.099722] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.099939] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.102679] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.109872] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.115984] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.121247] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.127146] denver_knobs_init:MTS_VERSION:55637613 [ 4.139414] t19x_cache tegra-cache: probed [ 4.142356] optee: probing for conduit method. [ 4.143242] optee: revision 3.16 (65cc2218) [ 4.144243] optee: dynamic shared memory is enabled [ 4.148513] optee: initialized driver [ 4.155597] nvpmodel: initialized successfully [ 4.156267] tegra_hv: get_hvd: not initialized yet [ 4.160398] user_ivc_mempool: hypervisor not present [ 4.166586] usbcore: registered new interface driver snd-usb-audio [ 4.173147] u32 classifier [ 4.174395] input device check on [ 4.178218] Actions configured [ 4.181504] Initializing XFRM netlink socket [ 4.186389] NET: Registered protocol family 10 [ 4.193726] Segment Routing with IPv6 [ 4.194031] NET: Registered protocol family 17 [ 4.198179] NET: Registered protocol family 15 [ 4.202465] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.215914] Bluetooth: RFCOMM socket layer initialized [ 4.220731] Bluetooth: RFCOMM ver 1.11 [ 4.224875] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.230444] Bluetooth: HIDP socket layer initialized [ 4.236721] 9pnet: Installing 9P2000 support [ 4.239852] Key type dns_resolver registered [ 4.245716] registered taskstats version 1 [ 4.248403] Loading compiled-in X.509 certificates [ 4.261074] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.264102] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.274669] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.276586] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.284900] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.293225] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.408241] tegra194-pcie 14160000.pcie: Link up [ 4.411236] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.411451] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.411577] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.411903] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.412184] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.412532] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.412987] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.425561] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.426126] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.426590] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.428229] pci 0004:01:00.0: supports D1 D2 [ 4.428417] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.439702] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.439999] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.440380] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.440785] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.441113] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.441287] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.443048] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.450497] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.458723] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.469541] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.473954] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.479256] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.486798] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.495631] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.496988] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.505115] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.513694] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.626744] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.627448] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.627647] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.627839] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.628263] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.628504] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.628848] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.629282] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.645978] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.646371] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.648487] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.649852] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.651160] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.652574] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.653618] pci 0005:00:00.0: Removing from iommu group 7 [ 5.653879] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.691914] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.714520] host1x 13e10000.host1x: initialized [ 5.716395] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.717402] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.718530] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.719297] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.720442] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.721028] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.721986] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.722531] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.723403] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.726794] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.736842] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.743860] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.753487] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.760590] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.770428] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.777442] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.787610] falcon 15340000.vic: Adding to iommu group 17 [ 5.801585] falcon 15340000.vic: initialized [ 5.802498] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.807987] falcon 15380000.nvjpg: initialized [ 5.808797] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.819989] falcon 154c0000.nvenc: initialized [ 5.820743] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.830322] falcon 15a80000.nvenc1: initialized [ 5.830945] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.842549] nvdec 15480000.nvdec: initialized [ 5.843183] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.853794] nvdec 15140000.nvdec1: initialized [ 5.854379] tsec 15500000.tsec: Adding to iommu group 18 [ 5.860116] tsec 15500000.tsec: initialized [ 5.860675] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.867719] tsec 15100000.tsecb: initialized [ 5.871385] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.895881] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.907494] gpio-374 (wifi-enable): hogged as output/high [ 5.907768] gpio-431 (camera-control-output-low): hogged as output/low [ 5.908139] gpio-432 (camera-control-output-low): hogged as output/low [ 5.909513] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.910870] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.912145] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.919006] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.924282] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.929879] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.935347] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.943809] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.951229] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.962708] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.968107] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.973972] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.982907] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.992107] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.999130] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.006794] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.013173] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.022793] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.029052] pva 16000000.pva0: Adding to iommu group 22 [ 6.055850] pva 16000000.pva0: initialized [ 6.060483] pva 16800000.pva1: Adding to iommu group 23 [ 6.071491] pva 16800000.pva1: initialized [ 6.075579] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.088343] nvdla 15880000.nvdla0: initialized [ 6.089753] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.098971] nvdla 158c0000.nvdla1: initialized [ 6.103556] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.103902] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.104330] tegradc 15210000.display: Adding to iommu group 26 [ 6.104340] tegradc 15200000.display: Adding to iommu group 26 [ 6.104652] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.105743] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.106160] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.106411] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.110270] tegra_cec 3960000.tegra_cec: probed [ 6.110975] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.117088] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.128817] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.134656] tegradccommon 15200000.display-hub: dma mapping done [ 6.141636] kfuse 3830000.kfuse: initialized [ 6.152425] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.157854] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.165078] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.171136] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.181128] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.185879] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.195067] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.200901] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.221630] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.222013] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.223687] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.232353] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.240649] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.247270] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.254973] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.262161] usb usb1: Product: xHCI Host Controller [ 6.266862] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.273157] usb usb1: SerialNumber: 3610000.xhci [ 6.278808] hub 1-0:1.0: USB hub found [ 6.282114] hub 1-0:1.0: 4 ports detected [ 6.286625] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.291162] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.299118] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.307089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.314483] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.321844] usb usb2: Product: xHCI Host Controller [ 6.326592] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.333024] usb usb2: SerialNumber: 3610000.xhci [ 6.339135] hub 2-0:1.0: USB hub found [ 6.341291] hub 2-0:1.0: 4 ports detected [ 6.385116] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.391367] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.393077] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.393281] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.406559] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.407699] tegra194-cpufreq ccplex: probed with BWMGR [ 6.408703] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.409342] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.409828] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.410981] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.418519] mmc0: CQHCI version 5.10 [ 6.418606] tegra194-vi5 15c10000.vi: initialized [ 6.420264] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.421411] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.425591] generic_infoframe_type: 0x87 [ 6.431606] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.435597] tegradc 15200000.display: DT parsed successfully [ 6.443672] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.449223] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.455492] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.465207] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.470206] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.470229] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.476083] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.478718] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.485167] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.491545] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.491883] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.492285] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.497674] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.498942] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.506331] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.506823] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.522407] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.526640] nvethernet 2490000.ethernet: Macsec not supported [ 6.544048] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.548844] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.579198] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.588899] tegradc 15200000.display: probed [ 6.595154] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.612311] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.619438] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.627519] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.633595] tegra-se-nvhost 15810000.se: initialized [ 6.636080] mmc0: Command Queue Engine enabled [ 6.641551] mmc0: periodic cache flush enabled [ 6.645752] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.652663] Console: switching to colour frame buffer device 240x67 [ 6.652946] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.658510] tegradc 15200000.display: fb registered [ 6.658577] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.663637] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.664425] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.664990] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.695379] tegra-se-nvhost 15820000.se: initialized [ 6.695672] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.700157] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.704656] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.704915] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.710893] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.731360] tegra-se-nvhost 15830000.se: initialized [ 6.736985] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.739609] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.742601] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.750207] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.750212] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.750215] usb 1-2: Manufacturer: Generic [ 6.752413] hub 1-2:1.0: USB hub found [ 6.757033] tegra-se-nvhost 15840000.se: initialized [ 6.764749] hub 1-2:1.0: 4 ports detected [ 6.770061] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.780673] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.782905] tegra_actmon d230000.actmon: in actmon_register()... [ 6.807051] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.807174] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.814171] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.827620] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.835167] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.835851] hvc_sysfs: hypervisor is not present [ 6.842425] Extcon AUX1(HDMI) enable [ 6.842673] tegradc 15210000.display: disp1 connected to head1->sor [ 6.856790] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.863900] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.868085] tegradc 15210000.display: DT parsed successfully [ 6.870118] random: crng init done [ 6.871545] ALSA device list: [ 6.877258] tegradc 15210000.display: Display dc.00000000ffda70d7 registered with id=1 [ 6.880529] No soundcards found. [ 6.895712] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.901321] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.909639] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.914997] tegradc 15210000.display: probed [ 6.915844] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.927565] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.927570] usb 2-3: Manufacturer: Generic [ 6.936831] tegradc 15210000.display: fb registered [ 6.945114] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.948531] Freeing unused kernel memory: 3968K [ 6.948891] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.960257] Run /init as init process [ 6.961302] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.970187] tegradc 15210000.display: blank - powerdown [ 6.975600] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.975603] Extcon DP: HPD disabled [ 6.975607] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.975618] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.975633] hub 2-3:1.0: USB hub found [ 6.975638] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.977478] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.014524] tegradc 15200000.display: blank - powerdown [ 7.032073] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.036207] Root device found: mmcblk0p1 [ 7.038254] Found dev node: /dev/mmcblk0p1 [ 7.064459] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.064467] Extcon AUX1(HDMI) disable [ 7.073240] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.077376] Rootfs mounted over mmcblk0p1 [ 7.087893] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.088907] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.101355] tegradc 15200000.display: unblank [ 7.102706] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.102922] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.108728] Switching from initrd to actual rootfs [ 7.108924] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.110838] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.114870] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.114874] Extcon AUX1(HDMI) enable [ 7.127607] tegradc 15200000.display: sync windows ret = 247 [ 7.136127] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.161551] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.163097] Extcon HDMI: HPD enabled [ 7.164510] tegradc 15200000.display: hdmi: plugged [ 7.181344] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.182975] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.184844] usb 1-3: Product: Bluetooth Radio [ 7.189288] usb 1-3: Manufacturer: Realtek [ 7.193657] usb 1-3: SerialNumber: 00e04c000001 [ 7.214063] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.215556] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.254022] systemd[1]: System time before build time, advancing clock. [ 7.327451] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.332541] systemd[1]: Detected architecture arm64. [ 7.379577] systemd[1]: Set hostname to . [ 7.554545] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.907996] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.909842] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.915601] systemd[1]: Created slice system-modprobe.slice. [ 7.920573] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.924855] systemd[1]: Created slice User and Session Slice. [ 7.928532] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.932891] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.936521] systemd[1]: Reached target User and Group Name Lookups. [ 7.939863] systemd[1]: Reached target Slices. [ 7.943137] systemd[1]: Reached target Swap. [ 7.947336] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.951156] systemd[1]: Listening on Syslog Socket. [ 7.954846] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.959918] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.964339] systemd[1]: Listening on Journal Audit Socket. [ 7.969502] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.973407] systemd[1]: Listening on Journal Socket. [ 7.977277] systemd[1]: Listening on udev Control Socket. [ 7.980851] systemd[1]: Listening on udev Kernel Socket. [ 7.989422] systemd[1]: Mounting Huge Pages File System... [ 7.998100] systemd[1]: Mounting POSIX Message Queue File System... [ 8.006351] systemd[1]: Mounting RPC Pipe File System... [ 8.015052] systemd[1]: Mounting Kernel Debug File System... [ 8.023880] systemd[1]: Mounting Kernel Trace File System... [ 8.034155] systemd[1]: Starting Journal Service... [ 8.043416] systemd[1]: Starting Set the console keyboard layout... [ 8.051940] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.055500] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.062084] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.070574] systemd[1]: Started Nameserver information manager. [ 8.075242] systemd[1]: Reached target Network (Pre). [ 8.082390] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.084306] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.090707] systemd[1]: Starting Load Kernel Modules... [ 8.098868] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.108147] systemd[1]: Starting udev Coldplug all Devices... [ 8.118322] systemd[1]: Mounted Huge Pages File System. [ 8.122033] systemd[1]: Mounted POSIX Message Queue File System. [ 8.125781] systemd[1]: Mounted RPC Pipe File System. [ 8.130415] systemd[1]: Mounted Kernel Debug File System. [ 8.133515] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.134128] systemd[1]: Mounted Kernel Trace File System. [ 8.134902] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.135337] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.139236] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.139249] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.139253] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.139579] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.140083] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.146547] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.146561] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.157423] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.163289] systemd[1]: nvfb-udev.service: Succeeded. [ 8.167619] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.179194] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.184300] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.185989] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.200650] systemd[1]: Starting Load/Save Random Seed... [ 8.210288] systemd[1]: Starting Create System Users... [ 8.242422] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.242422] [ 8.261425] systemd[1]: Finished Load/Save Random Seed. [ 8.272165] systemd[1]: Finished Load Kernel Modules. [ 8.278556] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.285438] systemd[1]: Mounting Kernel Configuration File System... [ 8.293480] systemd[1]: Started OP-TEE Client Supplicant. [ 8.303313] systemd[1]: Starting Apply Kernel Variables... [ 8.313808] systemd[1]: Finished Set the console keyboard layout. [ 8.321058] systemd[1]: Finished Create System Users. [ 8.325248] systemd[1]: Mounted Kernel Configuration File System. [ 8.333813] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.823005] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.832690] imx219 9-0010: board setup failed [ 9.834072] imx219: probe of 9-0010 failed with error -121 [ 9.846310] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.852821] imx219 10-0010: board setup failed [ 9.854168] imx219: probe of 10-0010 failed with error -121 [ 10.024492] hot-surface-alert cooling state: 0 -> 1 [ 10.887974] using random self ethernet address [ 10.889702] using random host ethernet address [ 11.387351] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.388992] Creating 1 MTD partitions on "spi6.0": [ 11.390680] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.293380] using random self ethernet address [ 12.294436] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.841754] nvidia: loading out-of-tree module taints kernel. [ 59.178405] watchdog: watchdog0: watchdog did not stop! [ 59.645019] Trying to unregister non-registered hwtime source [ 62.710830] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.712417] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] tÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuratioÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿän might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.645] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.647] I> width = 720, height = 480, frequency = 26973026 [0003.651] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.745] initializing target [0003.746] calling apps_init() [0003.746] starting app kernel_boot_app [0003.747] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000647] Console: colour dummy device 80x25 [ 0.002071] printk: console [tty0] enabled [ 0.002131] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002167] pid_max: default: 32768 minimum: 301 [ 0.002378] LSM: Security Framework initializing [ 0.002474] Yama: becoming mindful. [ 0.002521] SELinux: Initializing. [ 0.002694] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002743] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005859] rcu: Hierarchical SRCU implementation. [ 0.006142] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006802] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006852] DTB Build time: Aug 10 2022 20:31:49 [ 0.009546] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009800] Remapping and enabling EFI services. [ 0.011732] smp: Bringing up secondary CPUs ... [ 0.042348] Detected PIPT I-cache on CPU1 [ 0.042450] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072029] Detected PIPT I-cache on CPU2 [ 0.072174] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101817] Detected PIPT I-cache on CPU3 [ 0.101907] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131752] Detected PIPT I-cache on CPU4 [ 0.131867] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161650] Detected PIPT I-cache on CPU5 [ 0.161849] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162247] smp: Brought up 1 node, 6 CPUs [ 0.162434] SMP: Total of 6 processors activated. [ 0.162454] CPU features: detected: Privileged Access Never [ 0.162465] CPU features: detected: LSE atomic instructions [ 0.162476] CPU features: detected: User Access Override [ 0.162488] CPU features: detected: 32-bit EL0 Support [ 0.162500] CPU features: detected: RAS Extension Support [ 0.162511] CPU features: detected: CRC32 instructions [ 0.162523] CPU features: detected: 32-bit EL1 Support [ 0.234028] CPU: All CPU(s) started at EL2 [ 0.239194] devtmpfs: initialized [ 0.289481] Registered cp15_barrier emulation handler [ 0.289597] Registered setend emulation handler [ 0.289621] KASLR enabled [ 0.289919] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289965] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291301] pinctrl core: initialized pinctrl subsystem [ 0.292256] SMBIOS 3.0.0 present. [ 0.292285] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292904] NET: Registered protocol family 16 [ 0.294975] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295474] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296406] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296482] audit: initializing netlink subsys (disabled) [ 0.296790] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.297341] thermal_sys: Registered thermal governor 'step_wise' [ 0.297348] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297365] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299574] cpuidle: using governor menu [ 0.300002] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300429] ASID allocator initialised with 32768 entries [ 0.300695] Serial: AMBA PL011 UART driver [ 0.304112] Tegra reboot handler registered. [ 0.371486] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.371619] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.371809] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.371858] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.371993] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.372039] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.372176] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.372236] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372379] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372422] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.374815] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.374854] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.374908] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.374938] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.374988] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375036] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.375088] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375118] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375147] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375174] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.375201] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.375228] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.375256] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.375283] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.375310] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.375338] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.375365] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.375470] mc-err: mcerr ops are set to t19x [ 0.387643] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.387667] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.387680] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.387692] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.395365] ACPI: Interpreter disabled. [ 0.396624] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.398018] iommu: Default domain type: Translated [ 0.398089] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.398546] SCSI subsystem initialized [ 0.398697] usbcore: registered new interface driver usbfs [ 0.398745] usbcore: registered new interface driver hub [ 0.398783] usbcore: registered new device driver usb [ 0.399204] mc: Linux media interface: v0.10 [ 0.399232] videodev: Linux video capture interface: v2.00 [ 0.399536] pps_core: LinuxPPS API ver. 1 registered [ 0.399553] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.399573] PTP clock support registered [ 0.399773] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.400080] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.400165] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.400719] Registered efivars operations [ 0.405828] FPGA manager framework [ 0.405936] Advanced Linux Sound Architecture Driver Initialized. [ 0.406576] Bluetooth: Core ver 2.22 [ 0.406613] NET: Registered protocol family 31 [ 0.406625] Bluetooth: HCI device and connection manager initialized [ 0.406640] Bluetooth: HCI socket layer initialized [ 0.406658] Bluetooth: L2CAP socket layer initialized [ 0.406678] Bluetooth: SCO socket layer initialized [ 0.408156] camchar: rtcpu character device driver loaded [ 0.409071] clocksource: Switched to clocksource arch_sys_counter [ 0.691679] VFS: Disk quotas dquot_6.6.0 [ 0.691770] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.692074] pnp: PnP ACPI: disabled [ 0.702965] la/ptsa driver initialized. [ 0.703098] NET: Registered protocol family 2 [ 0.703252] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.709277] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.709350] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.709657] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.710092] TCP: Hash tables configured (established 65536 bind 65536) [ 0.710227] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.710315] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.710523] NET: Registered protocol family 1 [ 0.711143] RPC: Registered named UNIX socket transport module. [ 0.711158] RPC: Registered udp transport module. [ 0.711168] RPC: Registered tcp transport module. [ 0.711177] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.711194] PCI: CLS 0 bytes, default 64 [ 0.711366] Trying to unpack rootfs image as initramfs... [ 0.897992] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.900290] Freeing initrd memory: 8196K [ 0.904209] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.904249] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.904331] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.904690] kvm [1]: IPA Size Limit: 40 bits [ 0.905163] kvm [1]: vgic interrupt IRQ9 [ 0.905608] kvm [1]: VHE mode initialized successfully [ 0.907045] Initialise system trusted keyrings [ 0.907353] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.913422] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.914144] NFS: Registering the id_resolver key type [ 0.914181] Key type id_resolver registered [ 0.914196] Key type id_legacy registered [ 0.914287] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.914312] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.914375] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.923961] NET: Registered protocol family 38 [ 0.923988] Key type asymmetric registered [ 0.924003] Asymmetric key parser 'x509' registered [ 0.924046] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.924219] io scheduler mq-deadline registered [ 0.924238] io scheduler kyber registered [ 0.929900] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.932940] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.933060] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.933139] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.933212] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.933284] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.938674] scrncapt: init (heads:4 wins:6 planes:4) [ 0.938941] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.939852] EINJ: ACPI disabled. [ 0.943168] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.943197] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.943213] tegra-pmc: ### PMC reset level: L1 [ 0.943226] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.943280] tegra-pmc: PMC Prod config success [ 0.948420] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.953135] random: fast init done [ 0.953383] printk: console [ttyTCU0] enabled [ 2.505753] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.510504] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.514787] arm-smmu 10000000.iommu: stage 1 translation [ 2.520297] arm-smmu 10000000.iommu: stage 2 translation [ 2.526065] arm-smmu 10000000.iommu: nested translation [ 2.531421] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.538321] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.547763] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.551718] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.558011] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.565562] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.571317] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.575769] arm-smmu 12000000.iommu: stage 1 translation [ 2.581298] arm-smmu 12000000.iommu: stage 2 translation [ 2.586716] arm-smmu 12000000.iommu: nested translation [ 2.592417] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.599343] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.608394] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.612716] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.619260] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.626541] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.635974] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.639390] tegra_profiler: auth: init [ 2.643864] THERMAL EST: found 3 subdevs [ 2.647092] THERMAL EST num_resources: 0 [ 2.650927] [THERMAL EST subdev 0] [ 2.654508] [THERMAL EST subdev 1] [ 2.657920] [THERMAL EST subdev 2] [ 2.661165] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.667568] THERMAL EST: thz register success. [ 2.671882] THERMAL EST: end of probe, return err: 0 [ 2.676856] nvsciipc: loaded module [ 2.683692] tun: Universal TUN/TAP device driver, 1.6 [ 2.686252] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.692937] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.698487] e1000e: Intel(R) PRO/1000 Network Driver [ 2.703162] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.709505] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.714536] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.720870] PPP generic driver version 2.4.2 [ 2.725192] PPP BSD Compression module registered [ 2.729774] PPP Deflate Compression module registered [ 2.735031] PPP MPPE Compression module registered [ 2.740027] usbcore: registered new interface driver r8152 [ 2.745577] usbcore: registered new interface driver asix [ 2.750610] usbcore: registered new interface driver ax88179_178a [ 2.756990] usbcore: registered new interface driver cdc_ether [ 2.762940] usbcore: registered new interface driver net1080 [ 2.768539] usbcore: registered new interface driver cdc_subset [ 2.774584] usbcore: registered new interface driver zaurus [ 2.780294] usbcore: registered new interface driver cdc_ncm [ 2.785723] usbcore: registered new interface driver aqc111 [ 2.791576] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.797676] ohci-pci: OHCI PCI platform driver [ 2.801729] ohci-platform: OHCI generic platform driver [ 2.807648] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.814007] usbcore: registered new interface driver uas [ 2.818267] usbcore: registered new interface driver usb-storage [ 2.824307] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.830053] mousedev: PS/2 mouse device common for all mice [ 2.835442] usbcore: registered new interface driver xpad [ 2.843032] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.845914] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.853947] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.860135] i2c /dev entries driver [ 2.863799] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.869532] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.874962] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.880325] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.885405] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.891183] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.896332] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.909268] device-mapper: uevent: version 1.0.3 [ 2.909732] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.916742] cpuidle: Initializing cpuidle driver [ 2.920514] sdhci: Secure Digital Host Controller Interface driver [ 2.925529] sdhci: Copyright(c) Pierre Ossman [ 2.929623] Synopsys Designware Multimedia Card Interface Driver [ 2.935778] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.941708] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.942311] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.955130] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.972641] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.981539] vdd-1v0: supplied by regulator-dummy [ 2.986845] vdd-1v8-hs: supplied by regulator-dummy [ 2.991493] vdd-1v8-ls: supplied by regulator-dummy [ 2.996248] vdd-1v8-ao: supplied by regulator-dummy [ 3.000105] vddio-ddr-1v1: supplied by regulator-dummy [ 3.004381] vdd-rtc: supplied by regulator-dummy [ 3.005942] spmic-ldo1: supplied by regulator-dummy [ 3.007187] vdd-ao-3v3: supplied by regulator-dummy [ 3.013218] vddio-emmc-3v3: supplied by regulator-dummy [ 3.019266] spmic-ldo4: supplied by regulator-dummy [ 3.020368] vdd-usb-3v3: supplied by regulator-dummy [ 3.026866] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.032890] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.038278] spmic-ldo8: supplied by vdd-1v8-ls [ 3.039630] gpio-510 (gpio_default): hogged as output/high [ 3.041755] gpio-511 (gpio_default): hogged as output/high [ 3.048957] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.187607] max77686-rtc max77620-rtc: registered as rtc0 [ 3.188816] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.189137] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.883100] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.884128] hid: raw HID events driver (C) Jiri Kosina [ 3.884876] usbcore: registered new interface driver usbhid [ 3.885089] usbhid: USB HID core driver [ 3.886744] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.887891] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.937788] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.013225] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.247 ms) ÿá[ 3.972907] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.973491] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.974420] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.975217] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.976857] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.977694] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.978309] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.979572] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.979917] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.981958] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.988979] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.995715] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.000232] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.007041] denver_knobs_init:MTS_VERSION:55637613 [ 4.019092] t19x_cache tegra-cache: probed [ 4.023901] optee: probing for conduit method. [ 4.024834] optee: revision 3.16 (65cc2218) [ 4.026099] optee: dynamic shared memory is enabled [ 4.028240] optee: initialized driver [ 4.035278] nvpmodel: initialized successfully [ 4.035955] tegra_hv: get_hvd: not initialized yet [ 4.040197] user_ivc_mempool: hypervisor not present [ 4.046369] usbcore: registered new interface driver snd-usb-audio [ 4.053062] u32 classifier [ 4.053975] input device check on [ 4.057645] Actions configured [ 4.061682] Initializing XFRM netlink socket [ 4.066500] NET: Registered protocol family 10 [ 4.072548] Segment Routing with IPv6 [ 4.073913] NET: Registered protocol family 17 [ 4.077834] NET: Registered protocol family 15 [ 4.082486] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.096205] Bluetooth: RFCOMM socket layer initialized [ 4.100751] Bluetooth: RFCOMM ver 1.11 [ 4.104404] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.110572] Bluetooth: HIDP socket layer initialized [ 4.116201] 9pnet: Installing 9P2000 support [ 4.119930] Key type dns_resolver registered [ 4.125855] registered taskstats version 1 [ 4.128069] Loading compiled-in X.509 certificates [ 4.142092] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.144077] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.154176] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.156044] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.164893] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.173054] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.289164] tegra194-pcie 14160000.pcie: Link up [ 4.292059] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.292298] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.292427] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.292667] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.292865] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.293288] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.293723] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.306305] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.306856] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.307331] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.308834] pci 0004:01:00.0: supports D1 D2 [ 4.308987] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.321518] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.321861] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.322074] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.322565] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.322834] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.322983] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.323676] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.331137] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.339885] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.349972] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.354634] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.360098] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.367311] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.376722] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.377696] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.386327] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.394516] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.510015] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.510737] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.510947] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.511092] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.511361] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.511615] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.511998] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.512467] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.535100] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.535434] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.537507] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.538876] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.540649] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.542170] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.543200] pci 0005:00:00.0: Removing from iommu group 7 [ 5.543703] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.575290] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.596851] host1x 13e10000.host1x: initialized [ 5.598691] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.599608] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.600858] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.601738] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.602897] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.603676] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.604831] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.605555] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.606722] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.610428] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.620431] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.627355] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.637465] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.644312] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.654038] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.661507] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.670820] falcon 15340000.vic: Adding to iommu group 17 [ 5.685179] falcon 15340000.vic: initialized [ 5.686031] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.691254] falcon 15380000.nvjpg: initialized [ 5.691898] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.703775] falcon 154c0000.nvenc: initialized [ 5.704434] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.714242] falcon 15a80000.nvenc1: initialized [ 5.714897] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.726329] nvdec 15480000.nvdec: initialized [ 5.726937] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.736571] nvdec 15140000.nvdec1: initialized [ 5.737250] tsec 15500000.tsec: Adding to iommu group 18 [ 5.742939] tsec 15500000.tsec: initialized [ 5.743620] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.751768] tsec 15100000.tsecb: initialized [ 5.755911] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.779868] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.790108] gpio-374 (wifi-enable): hogged as output/high [ 5.790442] gpio-431 (camera-control-output-low): hogged as output/low [ 5.790704] gpio-432 (camera-control-output-low): hogged as output/low [ 5.792313] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.794182] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.795658] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.802444] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.807737] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.813297] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.818713] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.826805] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.834787] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.846478] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.851112] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.857334] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.866166] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.875380] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.882322] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.890085] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.896251] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.905973] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.912134] pva 16000000.pva0: Adding to iommu group 22 [ 5.938178] pva 16000000.pva0: initialized [ 5.942490] pva 16800000.pva1: Adding to iommu group 23 [ 5.953757] pva 16800000.pva1: initialized [ 5.957401] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.970070] nvdla 15880000.nvdla0: initialized [ 5.971519] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.979896] nvdla 158c0000.nvdla1: initialized [ 5.982139] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.982385] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.982714] tegradccommon 15200000.display-hub: dma mapping done [ 5.984347] tegradc 15200000.display: Adding to iommu group 26 [ 5.992023] tegradc 15200000.display: disp0 connected to head0->sor1 [ 5.992379] generic_infoframe_type: 0x87 [ 5.992620] tegradc 15200000.display: DT parsed successfully [ 5.992899] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.002701] tegradc 15210000.display: Adding to iommu group 26 [ 6.010344] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.011084] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.014685] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.014718] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.022580] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.044540] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.044793] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.050088] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.062770] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.062869] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.079079] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.084272] tegra_cec 3960000.tegra_cec: probed [ 6.084940] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.090068] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.102258] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.104084] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.111568] tegradc 15210000.display: disp0 connected to head1->sor [ 6.116323] kfuse 3830000.kfuse: initialized [ 6.122634] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.126879] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.133634] tegradc 15210000.display: DT parsed successfully [ 6.140172] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.145843] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.160480] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.166841] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.176140] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.181446] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.190742] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.196378] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.215929] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.216312] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.219192] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.227720] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.236463] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.242968] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.250353] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.257548] usb usb1: Product: xHCI Host Controller [ 6.262800] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.269044] usb usb1: SerialNumber: 3610000.xhci [ 6.274515] hub 1-0:1.0: USB hub found [ 6.277651] hub 1-0:1.0: 4 ports detected [ 6.281789] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.286750] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.294630] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.302012] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.309991] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.317189] usb usb2: Product: xHCI Host Controller [ 6.322460] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.328630] usb usb2: SerialNumber: 3610000.xhci [ 6.333929] hub 2-0:1.0: USB hub found [ 6.336800] hub 2-0:1.0: 4 ports detected [ 6.377361] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.383534] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.385733] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.385934] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.399765] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.400774] tegra194-cpufreq ccplex: probed with BWMGR [ 6.401965] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.402867] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.403335] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.404678] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.413291] mmc0: CQHCI version 5.10 [ 6.415827] tegra194-vi5 15c10000.vi: initialized [ 6.417426] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.419269] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.420682] generic_infoframe_type: 0x87 [ 6.427680] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.430898] tegradc 15200000.display: DT parsed successfully [ 6.439271] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.444789] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.451399] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.466031] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.472520] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.472580] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.480529] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.480534] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.503749] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.509081] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.509406] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.516049] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.516140] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.522488] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.529962] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.531284] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.537897] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.547077] -->macsec_probe() [ 6.554038] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.555011] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.565541] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.565544] ************************************** [ 6.565546] CPU:0, Error:cbb-noc [ 6.565550] Error Logger : 0 [ 6.565558] ErrLog0 : 0x80030000 [ 6.565561] Transaction Type : RD - Read, Incrementing [ 6.565564] Error Code : SLV [ 6.565567] Error Source : Target [ 6.565570] Error Description : Target error detected by CBB slave [ 6.565579] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.565584] Packet header Lock : 0 [ 6.565587] Packet header Len1 : 3 [ 6.565589] NOC protocol version : version >= 2.7 [ 6.565592] ErrLog1 : 0x35242e [ 6.565595] ErrLog2 : 0x0 [ 6.565598] RouteId : 0x35242e [ 6.565602] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.565605] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.565607] TargSubRange : 18 [ 6.565609] SeqId : 0 [ 6.565612] ErrLog3 : 0x4045c [ 6.565615] ErrLog4 : 0x0 [ 6.565619] Address accessed : 0x15b4045c [ 6.565622] ErrLog5 : 0xb89f851 [ 6.565625] Non-Modify : 0x1 [ 6.565628] AXI ID : 0x17 [ 6.565630] Master ID : CCPLEX [ 6.565633] Security Group(GRPSEC): 0x7e [ 6.565637] Cache : 0x1 -- Bufferable [ 6.565640] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.565643] FALCONSEC : 0x0 [ 6.565646] Virtual Queuing Channel(VQC): 0x0 [ 6.565650] ************************************** [ 6.565667] <--macsec_probe() [ 6.565691] ------------[ cut here ]------------ [ 6.565696] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.565701] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.565721] Modules linked in: [ 6.565731] CPU: 0 PID: 7 Comm: kworker/u12:0 Not tainted 5.10.104-tegra #1 [ 6.565734] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.565753] Workqueue: events_unbound async_run_entry_fn [ 6.565762] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.565770] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 6.565774] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 6.565777] sp : ffff800010003de0 [ 6.565786] x29: ffff800010003de0 x28: 0000000000000001 [ 6.565800] x27: 0000000000000005 x26: ffffdf2154d53f58 [ 6.565813] x25: ffffdf21556ace10 x24: 0000000000000001 [ 6.565825] x23: ffffdf2155047000 x22: ffffdf21554cea00 [ 6.565838] x21: 000000000000000f x20: ffff286dc0e66080 [ 6.565850] x19: ffffdf21554cea00 x18: 0000000000000020 [ 6.565863] x17: ffffdf2154dfd008 x16: 000000009578d568 [ 6.565875] x15: ffff286dc0162270 x14: ffffffffffffffff [ 6.565902] x13: ffffdf215565ade8 x12: ffffdf215565aa2d [ 6.565910] x11: 0000000000000038 x10: 0101010101010101 [ 6.565918] x9 : ffff800010003cf0 x8 : 2a2a2a2a2a2a2a2a [ 6.565929] x7 : 2a2a2a2a2a2a2a2a x6 : 000000002aee71d1 [ 6.565937] x5 : 000000000000000c x4 : 00000000fffff2a1 [ 6.565944] x3 : 00000000ffffffff x2 : ffffdf21537ee090 [ 6.565951] x1 : ffff286dc0161d00 x0 : 0000000000010000 [ 6.565958] Call trace: [ 6.565964] tegra194_cbb_err_isr+0x190/0x1b0 [ 6.565972] __handle_irq_event_percpu+0x68/0x2a0 [ 6.565977] handle_irq_event_percpu+0x40/0xa0 [ 6.565982] handle_irq_event+0x50/0xf0 [ 6.565986] handle_fasteoi_irq+0xc0/0x170 [ 6.565992] generic_handle_irq+0x40/0x60 [ 6.565997] __handle_domain_irq+0x70/0xd0 [ 6.566002] efi_header_end+0xb0/0xf0 [ 6.566006] el1_irq+0xd0/0x180 [ 6.566014] tegra_hda_get_dev_id+0x6c/0x2b0 [ 6.566018] tegra_hda_init+0x234/0x440 [ 6.566023] tegra_dc_hdmi_init+0x820/0xb50 [ 6.566028] tegra_dc_set_out+0x2cc/0x480 [ 6.566032] tegra_dc_probe+0xa90/0x1570 [ 6.566037] platform_drv_probe+0x5c/0xb0 [ 6.566044] really_probe+0xf8/0x3d0 [ 6.566049] driver_probe_device+0x60/0xc0 [ 6.566054] __device_attach_driver+0x8c/0xd0 [ 6.566058] bus_for_each_drv+0x8c/0xe0 [ 6.566063] __device_attach_async_helper+0xc4/0xf0 [ 6.566067] async_run_entry_fn+0x4c/0x150 [ 6.566074] process_one_work+0x1c4/0x4a0 [ 6.566078] worker_thread+0x54/0x430 [ 6.566082] kthread+0x148/0x170 [ 6.566087] ret_from_fork+0x10/0x24 [ 6.566096] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 6.566106] ---[ end trace 04cba70b4fd5bdb5 ]--- [ 6.566110] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 6.566114] SMP: stopping secondary CPUs [ 6.569248] Kernel Offset: 0x5f2143630000 from 0xffff800010000000 [ 6.569251] PHYS_OFFSET: 0xffffd79340000000 [ 6.569256] CPU features: 0x8240002,03802a30 [ 6.569258] Memory Limit: none [ 7.010759] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.030] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.337] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.338] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.338] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.352] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.355] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.686] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.732] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.745] initializing target [0003.746] calling apps_init() [0003.747] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000730] Console: colour dummy device 80x25 [ 0.002133] printk: console [tty0] enabled [ 0.002202] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002237] pid_max: default: 32768 minimum: 301 [ 0.002457] LSM: Security Framework initializing [ 0.002515] Yama: becoming mindful. [ 0.002556] SELinux: Initializing. [ 0.002702] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002745] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005597] rcu: Hierarchical SRCU implementation. [ 0.005840] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006559] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006608] DTB Build time: Aug 10 2022 20:31:49 [ 0.009409] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009666] Remapping and enabling EFI services. [ 0.011696] smp: Bringing up secondary CPUs ... [ 0.040896] Detected PIPT I-cache on CPU1 [ 0.041004] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074136] Detected PIPT I-cache on CPU2 [ 0.074283] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103827] Detected PIPT I-cache on CPU3 [ 0.104031] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133829] Detected PIPT I-cache on CPU4 [ 0.133996] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163642] Detected PIPT I-cache on CPU5 [ 0.163830] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164209] smp: Brought up 1 node, 6 CPUs [ 0.164383] SMP: Total of 6 processors activated. [ 0.164445] CPU features: detected: Privileged Access Never [ 0.164470] CPU features: detected: LSE atomic instructions [ 0.164483] CPU features: detected: User Access Override [ 0.164496] CPU features: detected: 32-bit EL0 Support [ 0.164507] CPU features: detected: RAS Extension Support [ 0.164519] CPU features: detected: CRC32 instructions [ 0.164531] CPU features: detected: 32-bit EL1 Support [ 0.236915] CPU: All CPU(s) started at EL2 [ 0.242839] devtmpfs: initialized [ 0.290847] Registered cp15_barrier emulation handler [ 0.290984] Registered setend emulation handler [ 0.291007] KASLR enabled [ 0.291251] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291275] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292636] pinctrl core: initialized pinctrl subsystem [ 0.293616] SMBIOS 3.0.0 present. [ 0.293645] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294223] NET: Registered protocol family 16 [ 0.296089] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296594] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297283] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297338] audit: initializing netlink subsys (disabled) [ 0.297544] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.297971] thermal_sys: Registered thermal governor 'step_wise' [ 0.297977] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297990] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300163] cpuidle: using governor menu [ 0.300459] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300974] ASID allocator initialised with 32768 entries [ 0.301209] Serial: AMBA PL011 UART driver [ 0.304635] Tegra reboot handler registered. [ 0.379609] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.379729] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.379950] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.380016] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.380140] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.380189] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.380303] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.380353] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.380553] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.380622] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.382830] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.382865] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.382895] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.382923] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.382954] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.382982] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.383020] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.383051] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.383077] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.383102] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.383127] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.383152] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.383179] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.383204] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.383229] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.383254] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.383279] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.383369] mc-err: mcerr ops are set to t19x [ 0.395046] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.395072] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.395084] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.395096] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.402389] ACPI: Interpreter disabled. [ 0.403577] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.404936] iommu: Default domain type: Translated [ 0.405003] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.405351] SCSI subsystem initialized [ 0.405493] usbcore: registered new interface driver usbfs [ 0.405534] usbcore: registered new interface driver hub [ 0.405565] usbcore: registered new device driver usb [ 0.405966] mc: Linux media interface: v0.10 [ 0.405992] videodev: Linux video capture interface: v2.00 [ 0.406320] pps_core: LinuxPPS API ver. 1 registered [ 0.406335] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.406356] PTP clock support registered [ 0.406562] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.406858] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.406908] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.407605] Registered efivars operations [ 0.415237] FPGA manager framework [ 0.415342] Advanced Linux Sound Architecture Driver Initialized. [ 0.415891] Bluetooth: Core ver 2.22 [ 0.415931] NET: Registered protocol family 31 [ 0.415943] Bluetooth: HCI device and connection manager initialized [ 0.415957] Bluetooth: HCI socket layer initialized [ 0.415973] Bluetooth: L2CAP socket layer initialized [ 0.415993] Bluetooth: SCO socket layer initialized [ 0.417702] camchar: rtcpu character device driver loaded [ 0.418451] clocksource: Switched to clocksource arch_sys_counter [ 0.708558] VFS: Disk quotas dquot_6.6.0 [ 0.708634] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.708993] pnp: PnP ACPI: disabled [ 0.721458] la/ptsa driver initialized. [ 0.721609] NET: Registered protocol family 2 [ 0.721781] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.726373] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.726472] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.726778] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.727215] TCP: Hash tables configured (established 65536 bind 65536) [ 0.727340] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.727436] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.727646] NET: Registered protocol family 1 [ 0.728277] RPC: Registered named UNIX socket transport module. [ 0.728292] RPC: Registered udp transport module. [ 0.728302] RPC: Registered tcp transport module. [ 0.728311] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.728342] PCI: CLS 0 bytes, default 64 [ 0.728546] Trying to unpack rootfs image as initramfs... [ 0.914136] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.916321] Freeing initrd memory: 8196K [ 0.920578] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.920616] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.920649] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.921083] kvm [1]: IPA Size Limit: 40 bits [ 0.921733] kvm [1]: vgic interrupt IRQ9 [ 0.922386] kvm [1]: VHE mode initialized successfully [ 0.924166] Initialise system trusted keyrings [ 0.924531] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.930606] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.931438] NFS: Registering the id_resolver key type [ 0.931472] Key type id_resolver registered [ 0.931486] Key type id_legacy registered [ 0.931604] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.931632] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.931671] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.942810] NET: Registered protocol family 38 [ 0.942837] Key type asymmetric registered [ 0.942852] Asymmetric key parser 'x509' registered [ 0.942914] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.943150] io scheduler mq-deadline registered [ 0.943171] io scheduler kyber registered [ 0.949532] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.953157] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.953260] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.953335] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.953406] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.953486] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.959345] scrncapt: init (heads:4 wins:6 planes:4) [ 0.959727] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.960761] EINJ: ACPI disabled. [ 0.964502] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.964551] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 0.964567] tegra-pmc: ### PMC reset level: L1 [ 0.964580] tegra-pmc: ### PMC reset status reg: 0x9 [ 0.964633] tegra-pmc: PMC Prod config success [ 0.970904] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.991869] random: fast init done [ 0.999735] printk: console [ttyTCU0] enabled [ 2.529088] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.533221] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.537968] arm-smmu 10000000.iommu: stage 1 translation [ 2.543333] arm-smmu 10000000.iommu: stage 2 translation [ 2.549039] arm-smmu 10000000.iommu: nested translation [ 2.554115] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.561293] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.572824] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.574936] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.581239] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.589371] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.594532] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.599001] arm-smmu 12000000.iommu: stage 1 translation [ 2.604766] arm-smmu 12000000.iommu: stage 2 translation [ 2.609934] arm-smmu 12000000.iommu: nested translation [ 2.615623] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.622799] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.633921] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.635949] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.642225] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.649951] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.659925] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.662923] tegra_profiler: auth: init [ 2.667189] THERMAL EST: found 3 subdevs [ 2.670293] THERMAL EST num_resources: 0 [ 2.674431] [THERMAL EST subdev 0] [ 2.677486] [THERMAL EST subdev 1] [ 2.681156] [THERMAL EST subdev 2] [ 2.684141] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.690649] THERMAL EST: thz register success. [ 2.694873] THERMAL EST: end of probe, return err: 0 [ 2.700408] nvsciipc: loaded module [ 2.707876] tun: Universal TUN/TAP device driver, 1.6 [ 2.709589] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.715913] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.721801] e1000e: Intel(R) PRO/1000 Network Driver [ 2.726400] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.732744] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.738029] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.744148] PPP generic driver version 2.4.2 [ 2.748500] PPP BSD Compression module registered [ 2.752753] PPP Deflate Compression module registered [ 2.758000] PPP MPPE Compression module registered [ 2.763266] usbcore: registered new interface driver r8152 [ 2.768552] usbcore: registered new interface driver asix [ 2.774107] usbcore: registered new interface driver ax88179_178a [ 2.780243] usbcore: registered new interface driver cdc_ether [ 2.785924] usbcore: registered new interface driver net1080 [ 2.791569] usbcore: registered new interface driver cdc_subset [ 2.797839] usbcore: registered new interface driver zaurus [ 2.803522] usbcore: registered new interface driver cdc_ncm [ 2.809195] usbcore: registered new interface driver aqc111 [ 2.814823] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.820665] ohci-pci: OHCI PCI platform driver [ 2.825216] ohci-platform: OHCI generic platform driver [ 2.831148] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.837041] usbcore: registered new interface driver uas [ 2.841266] usbcore: registered new interface driver usb-storage [ 2.847700] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.853544] mousedev: PS/2 mouse device common for all mice [ 2.858661] usbcore: registered new interface driver xpad [ 2.866434] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.869121] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.876941] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.883423] i2c /dev entries driver [ 2.887092] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.893138] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.898164] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.903675] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.908956] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.914544] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.919850] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.933407] device-mapper: uevent: version 1.0.3 [ 2.933847] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.940385] cpuidle: Initializing cpuidle driver [ 2.944040] sdhci: Secure Digital Host Controller Interface driver [ 2.948755] sdhci: Copyright(c) Pierre Ossman [ 2.953108] Synopsys Designware Multimedia Card Interface Driver [ 2.959036] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.965023] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.965860] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.978506] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.000451] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.009985] vdd-1v0: supplied by regulator-dummy [ 3.015660] vdd-1v8-hs: supplied by regulator-dummy [ 3.020609] vdd-1v8-ls: supplied by regulator-dummy [ 3.025477] vdd-1v8-ao: supplied by regulator-dummy [ 3.029517] vddio-ddr-1v1: supplied by regulator-dummy [ 3.034101] vdd-rtc: supplied by regulator-dummy [ 3.035993] spmic-ldo1: supplied by regulator-dummy [ 3.037323] vdd-ao-3v3: supplied by regulator-dummy [ 3.043642] vddio-emmc-3v3: supplied by regulator-dummy [ 3.050177] spmic-ldo4: supplied by regulator-dummy [ 3.051533] vdd-usb-3v3: supplied by regulator-dummy [ 3.057850] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.064129] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.069746] spmic-ldo8: supplied by vdd-1v8-ls [ 3.071327] gpio-510 (gpio_default): hogged as output/high [ 3.072732] gpio-511 (gpio_default): hogged as output/high [ 3.075698] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.211440] max77686-rtc max77620-rtc: registered as rtc0 [ 3.212550] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.212918] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.054788] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.055837] hid: raw HID events driver (C) Jiri Kosina [ 4.056679] usbcore: registered new interface driver usbhid [ 4.056830] usbhid: USB HID core driver [ 4.058908] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.060356] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.108784] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.183167] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.192 ms) ÿá[ 4.144769] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.145292] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.146272] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.147090] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.148693] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.149353] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.149936] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.151215] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.151489] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.154171] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.160992] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.167579] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.172297] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.178705] denver_knobs_init:MTS_VERSION:55637613 [ 4.191502] t19x_cache tegra-cache: probed [ 4.194335] optee: probing for conduit method. [ 4.195268] optee: revision 3.16 (65cc2218) [ 4.196186] optee: dynamic shared memory is enabled [ 4.199934] optee: initialized driver [ 4.207568] nvpmodel: initialized successfully [ 4.208202] tegra_hv: get_hvd: not initialized yet [ 4.211860] user_ivc_mempool: hypervisor not present [ 4.218068] usbcore: registered new interface driver snd-usb-audio [ 4.224506] u32 classifier [ 4.225859] input device check on [ 4.229672] Actions configured [ 4.233120] Initializing XFRM netlink socket [ 4.237793] NET: Registered protocol family 10 [ 4.244924] Segment Routing with IPv6 [ 4.245492] NET: Registered protocol family 17 [ 4.249581] NET: Registered protocol family 15 [ 4.254219] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.267739] Bluetooth: RFCOMM socket layer initialized [ 4.272475] Bluetooth: RFCOMM ver 1.11 [ 4.276331] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.281915] Bluetooth: HIDP socket layer initialized [ 4.287951] 9pnet: Installing 9P2000 support [ 4.291661] Key type dns_resolver registered [ 4.297058] registered taskstats version 1 [ 4.299831] Loading compiled-in X.509 certificates [ 4.313223] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.315745] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.325236] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.328023] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.336308] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.344916] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.462624] tegra194-pcie 14160000.pcie: Link up [ 4.465375] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.465593] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.465741] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.465977] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.466172] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.466598] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.467028] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.477683] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.478147] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.478622] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.480123] pci 0004:01:00.0: supports D1 D2 [ 4.480341] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.488431] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.488778] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.489071] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.489445] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.489699] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.491359] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.497418] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.504776] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.513077] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.523202] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.527930] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.533618] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.540698] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.549600] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.551384] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.559702] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.568374] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.683372] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.684069] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.684311] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.684485] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.684781] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.684946] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.685245] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.685638] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.701441] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.701924] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.704142] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.705389] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.706813] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.708228] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.708992] pci 0005:00:00.0: Removing from iommu group 7 [ 5.709261] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.740066] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.760364] host1x 13e10000.host1x: initialized [ 5.761854] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.763106] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.764010] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.764598] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.765384] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.765976] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.766932] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.767447] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.776940] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.783669] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.793154] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.800486] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.810360] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.817568] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.827518] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.834182] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.844357] falcon 15340000.vic: Adding to iommu group 17 [ 5.858410] falcon 15340000.vic: initialized [ 5.859425] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.865208] falcon 15380000.nvjpg: initialized [ 5.865921] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.877046] falcon 154c0000.nvenc: initialized [ 5.877596] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.886625] falcon 15a80000.nvenc1: initialized [ 5.887212] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.898741] nvdec 15480000.nvdec: initialized [ 5.899501] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.909991] nvdec 15140000.nvdec1: initialized [ 5.910577] tsec 15500000.tsec: Adding to iommu group 18 [ 5.915945] tsec 15500000.tsec: initialized [ 5.916412] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.924250] tsec 15100000.tsecb: initialized [ 5.927935] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.954178] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.964842] gpio-374 (wifi-enable): hogged as output/high [ 5.965182] gpio-431 (camera-control-output-low): hogged as output/low [ 5.965493] gpio-432 (camera-control-output-low): hogged as output/low [ 5.967106] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.969145] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.969767] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.975639] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.980855] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.986560] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.991971] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.000969] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.008327] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.019080] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.024530] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.030662] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.039490] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.048450] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.055834] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.063251] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.069762] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.079516] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.085423] pva 16000000.pva0: Adding to iommu group 22 [ 6.112403] pva 16000000.pva0: initialized [ 6.116743] pva 16800000.pva1: Adding to iommu group 23 [ 6.127280] pva 16800000.pva1: initialized [ 6.131676] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.144104] nvdla 15880000.nvdla0: initialized [ 6.145439] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.154206] nvdla 158c0000.nvdla1: initialized [ 6.156295] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.156590] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.156937] tegradccommon 15200000.display-hub: dma mapping done [ 6.158643] tegradc 15200000.display: Adding to iommu group 26 [ 6.165693] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.166055] generic_infoframe_type: 0x87 [ 6.166339] tegradc 15200000.display: DT parsed successfully [ 6.166716] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.174643] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.177053] tegradc 15210000.display: Adding to iommu group 26 [ 6.181730] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.183995] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.187508] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.193568] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.198911] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.207639] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.213303] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.221793] tegra_cec 3960000.tegra_cec: probed [ 6.240147] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.240673] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.245999] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.253569] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.264931] kfuse 3830000.kfuse: initialized [ 6.264946] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.269525] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.286160] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.293958] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.294654] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.299631] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.315316] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.317221] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.324202] tegradc 15210000.display: disp0 connected to head1->sor [ 6.329157] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.334186] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.344728] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.350291] tegradc 15210000.display: DT parsed successfully [ 6.356403] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.361309] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.389932] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.390333] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.392976] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.401536] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.410208] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.416674] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.424282] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.431507] usb usb1: Product: xHCI Host Controller [ 6.436564] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.442913] usb usb1: SerialNumber: 3610000.xhci [ 6.448686] hub 1-0:1.0: USB hub found [ 6.451533] hub 1-0:1.0: 4 ports detected [ 6.456121] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.460650] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.468234] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.476141] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.483849] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.491088] usb usb2: Product: xHCI Host Controller [ 6.496294] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.502546] usb usb2: SerialNumber: 3610000.xhci [ 6.507972] hub 2-0:1.0: USB hub found [ 6.511029] hub 2-0:1.0: 4 ports detected [ 6.550768] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.557083] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.558439] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.558747] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.572314] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.573312] tegra194-cpufreq ccplex: probed with BWMGR [ 6.574595] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.575362] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.575942] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.577318] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.586419] mmc0: CQHCI version 5.10 [ 6.587927] tegra194-vi5 15c10000.vi: initialized [ 6.590158] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.591265] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.594872] generic_infoframe_type: 0x87 [ 6.601309] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.604746] tegradc 15200000.display: DT parsed successfully [ 6.613124] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.616198] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.618401] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.625194] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.633346] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.640861] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.647412] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.647420] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.655992] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.662808] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.678514] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.685025] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.685219] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.690896] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.699541] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.702773] mmc0: Command Queue Engine enabled [ 6.702777] mmc0: periodic cache flush enabled [ 6.702789] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.703338] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.703508] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.703792] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.707480] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.714525] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.722949] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.729098] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.731283] tegradc 15200000.display: probed [ 6.797704] nvethernet 2490000.ethernet: Macsec not supported [ 6.798046] Console: switching to colour frame buffer device 240x67 [ 6.809761] tegradc 15200000.display: fb registered [ 6.814652] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.820177] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.820818] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.829329] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.834092] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.840051] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.853232] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.860682] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.867394] tegra-se-nvhost 15810000.se: initialized [ 6.872575] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.877770] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.884170] tegra-se-nvhost 15820000.se: initialized [ 6.890186] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.894842] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.901568] tegra-se-nvhost 15830000.se: initialized [ 6.901740] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.906845] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.915585] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.921470] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.928749] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.928767] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.928773] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.928777] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.928780] usb 1-2: Manufacturer: Generic [ 6.958278] tegra-se-nvhost 15840000.se: initialized [ 6.958287] hub 1-2:1.0: USB hub found [ 6.962791] hub 1-2:1.0: 4 ports detected [ 6.963404] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.963408] Extcon AUX1(HDMI) enable [ 6.963509] tegradc 15210000.display: disp1 connected to head1->sor [ 6.963684] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.963762] tegradc 15210000.display: DT parsed successfully [ 6.963818] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.963909] tegradc 15210000.display: vblank syncpt # 16 for dc 1 [ 6.963913] tegradc 15210000.display: vpulse3 syncpt # 17 for dc 1 [ 6.968204] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.970531] tegradc 15210000.display: probed [ 7.023390] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.025099] tegra_actmon d230000.actmon: in actmon_register()... [ 7.053619] tegradc 15210000.display: fb registered [ 7.053758] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.061934] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.071708] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.071812] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.079465] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.090646] hvc_sysfs: hypervisor is not present [ 7.092460] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.105574] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.106887] random: crng init done [ 7.112771] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.120922] tegradc 15210000.display: blank - powerdown [ 7.126028] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.133662] ALSA device list: [ 7.134170] usb 2-3: Manufacturer: Generic [ 7.137353] No soundcards found. [ 7.141506] Extcon DP: HPD disabled ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.148685] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.148795] tegradc 15200000.display: blank - powerdown [ 7.148858] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.148864] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.159328] hub 2-3:1.0: USB hub found [ 7.161234] hub 2-3:1.0: 4 ports detected [ 7.185506] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.185510] Extcon AUX1(HDMI) disable [ 7.186500] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.208922] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.209808] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.220362] tegradc 15200000.display: unblank [ 7.221430] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.221633] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.227445] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.229299] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.233400] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.233403] Extcon AUX1(HDMI) enable [ 7.234500] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.246095] tegradc 15200000.display: sync windows ret = 247 [ 7.278921] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.279998] Freeing unused kernel memory: 3968K [ 7.281578] Extcon HDMI: HPD enabled [ 7.281590] tegradc 15200000.display: hdmi: plugged [ 7.286136] Run /init as init process [ 7.299053] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.305094] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.335674] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.337049] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.338313] usb 1-3: Product: Bluetooth Radio [ 7.339558] usb 1-3: Manufacturer: Realtek [ 7.340745] usb 1-3: SerialNumber: 00e04c000001 [ 7.365128] Root device found: mmcblk0p1 [ 7.368359] Found dev node: /dev/mmcblk0p1 [ 7.404701] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.409915] Rootfs mounted over mmcblk0p1 [ 7.446592] Switching from initrd to actual rootfs [ 7.607813] systemd[1]: System time before build time, advancing clock. [ 7.679391] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.684116] systemd[1]: Detected architecture arm64. [ 7.734333] systemd[1]: Set hostname to . [ 7.904741] systemd-sysv-generator[243]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.251708] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.253312] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.258599] systemd[1]: Created slice system-modprobe.slice. [ 8.263093] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.267201] systemd[1]: Created slice User and Session Slice. [ 8.270487] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.274330] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.277727] systemd[1]: Reached target User and Group Name Lookups. [ 8.280809] systemd[1]: Reached target Slices. [ 8.283750] systemd[1]: Reached target Swap. [ 8.287568] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.291108] systemd[1]: Listening on Syslog Socket. [ 8.294435] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.297663] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.301663] systemd[1]: Listening on Journal Audit Socket. [ 8.305122] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.308679] systemd[1]: Listening on Journal Socket. [ 8.312247] systemd[1]: Listening on udev Control Socket. [ 8.315684] systemd[1]: Listening on udev Kernel Socket. [ 8.323711] systemd[1]: Mounting Huge Pages File System... [ 8.334667] systemd[1]: Mounting POSIX Message Queue File System... [ 8.342247] systemd[1]: Mounting RPC Pipe File System... [ 8.350591] systemd[1]: Mounting Kernel Debug File System... [ 8.359095] systemd[1]: Mounting Kernel Trace File System... [ 8.368779] systemd[1]: Starting Journal Service... [ 8.377427] systemd[1]: Starting Set the console keyboard layout... [ 8.385801] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.389472] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.395661] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.403372] systemd[1]: Started Nameserver information manager. [ 8.407949] systemd[1]: Reached target Network (Pre). [ 8.414832] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.416691] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.423105] systemd[1]: Starting Load Kernel Modules... [ 8.430896] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.438813] systemd[1]: Starting udev Coldplug all Devices... [ 8.449683] systemd[1]: Mounted Huge Pages File System. [ 8.453308] systemd[1]: Mounted POSIX Message Queue File System. [ 8.456799] systemd[1]: Mounted RPC Pipe File System. [ 8.460211] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.460516] systemd[1]: Mounted Kernel Debug File System. [ 8.463183] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.463606] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.466104] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.466117] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.466121] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.466597] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.467755] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.473381] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.473402] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.492047] systemd[1]: Mounted Kernel Trace File System. [ 8.499129] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.505327] systemd[1]: nvfb-udev.service: Succeeded. [ 8.509861] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.522912] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.535336] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.537110] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.543777] systemd[1]: Starting Load/Save Random Seed... [ 8.552866] systemd[1]: Starting Create System Users... [ 8.577089] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.577089] [ 8.604348] systemd[1]: Finished Load/Save Random Seed. [ 8.611841] systemd[1]: Finished Load Kernel Modules. [ 8.616445] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.622822] systemd[1]: Mounting Kernel Configuration File System... [ 8.631252] systemd[1]: Started OP-TEE Client Supplicant. [ 8.639909] systemd[1]: Starting Apply Kernel Variables... [ 8.649585] systemd[1]: Finished Set the console keyboard layout. [ 8.653752] systemd[1]: Mounted Kernel Configuration File System. [ 8.665371] systemd[1]: Finished Create System Users. [ 10.195856] hot-surface-alert cooling state: 0 -> 1 [ 10.213712] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.219726] imx219 9-0010: board setup failed [ 10.221164] imx219: probe of 9-0010 failed with error -121 [ 10.236526] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.245378] imx219 10-0010: board setup failed [ 10.246680] imx219: probe of 10-0010 failed with error -121 [ 10.524661] using random self ethernet address [ 10.537012] using random host ethernet address [ 11.907357] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.908556] Creating 1 MTD partitions on "spi6.0": [ 11.909634] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.438005] using random self ethernet address [ 12.439601] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.849469] nvidia: loading out-of-tree module taints kernel. [ 58.564069] watchdog: watchdog0: watchdog did not stop! [ 59.035688] Trying to unregister non-registered hwtime source [ 62.094017] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.096227] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy : 1ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.311] I> sdmmc DDR50 mode [0001.328] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.346] W> Cannot find any partition table for 00000003 [0001.347] > PARTITION_MANAGER: Failed to publish partition. [0001.363] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.364] I> Active Boot chain : 0 [0002.035] I> Relocating BR-BCT [0002.036] > DEVICE_PROD: device prod is not initialized. [0002.342] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.342] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.343] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.343] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.344] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.344] I> dram_block larger than 80000000 [0002.347] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.358] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.362] I> found decompressor handler: lz4 [0002.590] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.592] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aÿâclk_dt_late initialized ÿäuÿânoc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 202ÿâavfs_clk_platform_post initialized ÿä2 aÿâcvc_late initialized regulator_post initialized ÿäarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.211] I> Welcome to NVDisp-Init [0003.211] I> NVDisp-Init version: t194-f9ecfedc [0003.211] I> CPU-BL Params @ 0xca020000 [0003.212] I> 0) Base:0x00000000 Size:0x00000000 [0003.212] I> 1) Base:0xc8300000 Size:0x00100000 [0003.212] I> 2) Base:0xc9800000 Size:0x00200000 [0003.213] I> 3) Base:0xc8600000 Size:0x00200000 [0003.215] I> 4) Base:0xc8200000 Size:0x00100000 [0003.220] I> 5) Base:0xc8100000 Size:0x00100000 [0003.224] I> 6) Base:0xc9400000 Size:0x00400000 [0003.229] I> 7) Base:0xc9000000 Size:0x00400000 [0003.233] I> 8) Base:0xc8000000 Size:0x00100000 [0003.237] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.242] I> 10) Base:0xca800000 Size:0x00800000 [0003.246] I> 11) Base:0x40000000 Size:0x00040000 [0003.251] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.255] I> 13) Base:0x40046000 Size:0x00002000 [0003.260] I> 14) Base:0x40048000 Size:0x00002000 [0003.264] I> 15) Base:0xaf000000 Size:0x00004000 [0003.269] I> 16) Base:0x4004a000 Size:0x00002000 [0003.273] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.278] I> 18) Base:0x4004c000 Size:0x00002000 [0003.282] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.287] I> 20) Base:0x4004e000 Size:0x00002000 [0003.291] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.295] I> 22) Base:0x00000000 Size:0x00000000 [0003.300] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.304] I> 24) Base:0xcc000000 Size:0x02000000 [0003.309] I> 25) Base:0x40050000 Size:0x00002000 [0003.313] I> 26) Base:0x40040000 Size:0x00006000 [0003.318] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.322] I> 28) Base:0xc8400000 Size:0x00200000 [0003.327] I> 29) Base:0xc8800000 Size:0x00400000 [0003.331] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.336] I> 31) Base:0x00000000 Size:0x00000000 [0003.340] I> 32) Base:0xf8000000 Size:0x08000000 [0003.345] I> 33) Base:0xce000000 Size:0x2a000000 [0003.349] I> 34) Base:0xcb000000 Size:0x01000000 [0003.353] I> 35) Base:0xae000000 Size:0x01000000 [0003.358] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.362] I> 37) Base:0xca000000 Size:0x00800000 [0003.367] I> 38) Base:0x80000000 Size:0x20000000 [0003.371] I> 39) Base:0xb0000000 Size:0x08000000 [0003.376] I> 40) Base:0x00000000 Size:0x00000000 [0003.380] I> 41) Base:0x00000000 Size:0x00000000 [0003.385] I> 42) Base:0x00000000 Size:0x00000000 [0003.389] I> 43) Base:0x00000000 Size:0x00000000 [0003.394] I> 44) Base:0x00000000 Size:0x00000000 [0003.398] I> 45) Base:0x00000000 Size:0x00000000 [0003.403] GIC-SPI Target CPU: 0 [0003.406] Interrupts Init done [0003.408] calling constructors [0003.411] initializing heap [0003.414] I> Heap: [0xa0960000 ... 0xadf00000] [0003.418] initializing threads [0003.421] initializing timers [0003.424] creating bootstrap completion thread [0003.428] top of bootstrap2() [0003.431] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.436] initializing platform [0003.439] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.444] W> device prod register failed [0003.448] I> Bl_dtb @0xadf00000 [0003.451] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.473] I> fixed regulator driver initialized [0003.490] I> register 'maxim' power off handle [0003.493] I> virtual i2c enabled [0003.493] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.494] I> Boot-device: QSPI [0003.495] I> Boot_device: QSPI_FLASH instance: 0 [0003.499] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.510] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.517] I> QSPI source rate = 204000 Khz [0003.520] I> Requested rate for QSPI clock = 34000 Khz [0003.526] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.530] I> tx_clk_tap_delay : 0 [0003.533] I> rx_clk_tap_delay : 16 [0003.537] I> QSPI Flash Size = 32 MB [0003.544] I> Qspi initialized successfully [0003.545] I> qspi flash-0 params source = boot args [0003.549] W> No board IDs available [0003.552] E> Failed to get board id info! [0003.558] I> sdmmc-3 params source = safe params [0003.565] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.567] W> Cannot find any partition table for 00000003 [0003.571] E> Failed to publish 00000003 [0003.575] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> hdmi cable connected [0003.612] W> set volts not configured for 'vdd-1v0' [0003.619] W> set volts not configured for 'vdd-1v8-hs' [0003.619] I> retrieved tmds range from prod_list_hdmi_soc [0003.626] E> invalid display type [0003.627] E> cannot find any other nvdisp nodes [0003.644] I> edid read success [0003.657] I> edid read success [0003.657] I> width = 640, height = 480, frequency = 25174825 [0003.657] I> width = 1920, height = 1080, frequency = 148500000 [0003.658] I> width = 1280, height = 768, frequency = 79500000 [0003.658] I> width = 1360, height = 768, frequency = 85500000 [0003.658] I> width = 720, height = 480, frequency = 26973026 [0003.662] I> width = 720, height = 576, frequency = 26973026 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1280, height = 720, frequency = 74175824 [0003.679] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 1920, height = 1080, frequency = 148351648 [0003.691] I> width = 720, height = 480, frequency = 26973026 [0003.696] I> width = 720, height = 576, frequency = 26973026 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 3840, height = 2160, frequency = 296703296 [0003.725] I> width = 4096, height = 2160, frequency = 296703296 [0003.731] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.742] I> hdmi_enable, starting HDMI initialisation [0003.747] I> hdmi_enable, HDMI initialisation complete [0003.756] initializing target [0003.757] calling apps_init() [0003.758] starting app kernel_boot_app [0003.759] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000705] Console: colour dummy device 80x25 [ 0.002151] printk: console [tty0] enabled [ 0.002210] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002245] pid_max: default: 32768 minimum: 301 [ 0.002416] LSM: Security Framework initializing [ 0.002472] Yama: becoming mindful. [ 0.002513] SELinux: Initializing. [ 0.002665] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002708] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005594] rcu: Hierarchical SRCU implementation. [ 0.005833] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006688] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006737] DTB Build time: Aug 10 2022 20:31:49 [ 0.009368] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009612] Remapping and enabling EFI services. [ 0.011651] smp: Bringing up secondary CPUs ... [ 0.043545] Detected PIPT I-cache on CPU1 [ 0.043652] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.076137] Detected PIPT I-cache on CPU2 [ 0.076286] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105791] Detected PIPT I-cache on CPU3 [ 0.105883] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135552] Detected PIPT I-cache on CPU4 [ 0.135704] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165321] Detected PIPT I-cache on CPU5 [ 0.165516] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165819] smp: Brought up 1 node, 6 CPUs [ 0.165975] SMP: Total of 6 processors activated. [ 0.166088] CPU features: detected: Privileged Access Never [ 0.166111] CPU features: detected: LSE atomic instructions [ 0.166124] CPU features: detected: User Access Override [ 0.166138] CPU features: detected: 32-bit EL0 Support [ 0.166151] CPU features: detected: RAS Extension Support [ 0.166163] CPU features: detected: CRC32 instructions [ 0.166176] CPU features: detected: 32-bit EL1 Support [ 0.234951] CPU: All CPU(s) started at EL2 [ 0.242097] devtmpfs: initialized [ 0.291902] Registered cp15_barrier emulation handler [ 0.292075] Registered setend emulation handler [ 0.292100] KASLR enabled [ 0.292390] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.292414] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293833] pinctrl core: initialized pinctrl subsystem [ 0.294875] SMBIOS 3.0.0 present. [ 0.294903] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.295515] NET: Registered protocol family 16 [ 0.297719] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.298257] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.299208] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.299264] audit: initializing netlink subsys (disabled) [ 0.299499] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.299981] thermal_sys: Registered thermal governor 'step_wise' [ 0.299987] thermal_sys: Registered thermal governor 'power_allocator' [ 0.300001] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.303636] cpuidle: using governor menu [ 0.303925] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.304373] ASID allocator initialised with 32768 entries [ 0.304628] Serial: AMBA PL011 UART driver [ 0.308094] Tegra reboot handler registered. [ 0.383781] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.383931] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.384145] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.384192] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.384312] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.384356] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.384501] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.384560] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.384678] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.384726] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.386832] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.386866] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.386894] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.386922] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.386951] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.386981] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.387019] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.387049] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.387081] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.387105] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.387130] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.387154] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.387183] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.387208] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.387233] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.387257] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.387293] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.387400] mc-err: mcerr ops are set to t19x [ 0.400106] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.400127] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.400142] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.400153] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.406042] ACPI: Interpreter disabled. [ 0.407225] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.408399] iommu: Default domain type: Translated [ 0.408470] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.408857] SCSI subsystem initialized [ 0.409013] usbcore: registered new interface driver usbfs [ 0.409055] usbcore: registered new interface driver hub [ 0.409090] usbcore: registered new device driver usb [ 0.409519] mc: Linux media interface: v0.10 [ 0.409549] videodev: Linux video capture interface: v2.00 [ 0.409851] pps_core: LinuxPPS API ver. 1 registered [ 0.409865] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.409885] PTP clock support registered [ 0.410078] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.410409] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.410524] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.411178] Registered efivars operations [ 0.416846] FPGA manager framework [ 0.416985] Advanced Linux Sound Architecture Driver Initialized. [ 0.417579] Bluetooth: Core ver 2.22 [ 0.417618] NET: Registered protocol family 31 [ 0.417629] Bluetooth: HCI device and connection manager initialized [ 0.417644] Bluetooth: HCI socket layer initialized [ 0.417659] Bluetooth: L2CAP socket layer initialized [ 0.417680] Bluetooth: SCO socket layer initialized [ 0.419455] camchar: rtcpu character device driver loaded [ 0.420197] clocksource: Switched to clocksource arch_sys_counter [ 0.768707] VFS: Disk quotas dquot_6.6.0 [ 0.768779] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.769118] pnp: PnP ACPI: disabled [ 0.781850] la/ptsa driver initialized. [ 0.782007] NET: Registered protocol family 2 [ 0.782207] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.786760] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.786823] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.787123] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.787569] TCP: Hash tables configured (established 65536 bind 65536) [ 0.787696] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.787784] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.788024] NET: Registered protocol family 1 [ 0.789053] RPC: Registered named UNIX socket transport module. [ 0.789086] RPC: Registered udp transport module. [ 0.789101] RPC: Registered tcp transport module. [ 0.789114] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.789137] PCI: CLS 0 bytes, default 64 [ 0.789495] Trying to unpack rootfs image as initramfs... [ 1.058724] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.061884] Freeing initrd memory: 8196K [ 1.066301] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.066334] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.066373] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.066873] kvm [1]: IPA Size Limit: 40 bits [ 1.067436] kvm [1]: vgic interrupt IRQ9 [ 1.068013] kvm [1]: VHE mode initialized successfully [ 1.069860] Initialise system trusted keyrings [ 1.070182] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.079221] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.080381] NFS: Registering the id_resolver key type [ 1.080446] Key type id_resolver registered [ 1.080462] Key type id_legacy registered [ 1.080606] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.080633] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.080701] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.092573] NET: Registered protocol family 38 [ 1.092602] Key type asymmetric registered [ 1.092617] Asymmetric key parser 'x509' registered [ 1.092683] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.092977] io scheduler mq-deadline registered [ 1.092996] io scheduler kyber registered [ 1.099035] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.101950] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.102068] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.102170] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.102244] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.102311] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.107563] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.107574] scrncapt: init (heads:4 wins:6 planes:4) [ 1.108739] EINJ: ACPI disabled. [ 1.111965] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.111990] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.112005] tegra-pmc: ### PMC reset level: L1 [ 1.112018] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.112067] tegra-pmc: PMC Prod config success [ 1.117139] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.129018] random: fast init done [ 1.133982] printk: console [ttyTCU0] enabled [ 2.674279] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.679005] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.683601] arm-smmu 10000000.iommu: stage 1 translation [ 2.689244] arm-smmu 10000000.iommu: stage 2 translation [ 2.694508] arm-smmu 10000000.iommu: nested translation [ 2.700097] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.707268] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.718203] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.720112] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.726697] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.734666] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.739767] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.744715] arm-smmu 12000000.iommu: stage 1 translation [ 2.749966] arm-smmu 12000000.iommu: stage 2 translation [ 2.755667] arm-smmu 12000000.iommu: nested translation [ 2.760847] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.767998] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.778744] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.781377] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.787680] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.795378] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.804847] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.808079] tegra_profiler: auth: init [ 2.812635] THERMAL EST: found 3 subdevs [ 2.815749] THERMAL EST num_resources: 0 [ 2.819920] [THERMAL EST subdev 0] [ 2.823201] [THERMAL EST subdev 1] [ 2.826383] [THERMAL EST subdev 2] [ 2.829860] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.836395] THERMAL EST: thz register success. [ 2.840298] THERMAL EST: end of probe, return err: 0 [ 2.845914] nvsciipc: loaded module [ 2.853102] tun: Universal TUN/TAP device driver, 1.6 [ 2.855517] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.861368] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.866968] e1000e: Intel(R) PRO/1000 Network Driver [ 2.872114] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.877948] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.883488] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.889662] PPP generic driver version 2.4.2 [ 2.893936] PPP BSD Compression module registered [ 2.898465] PPP Deflate Compression module registered [ 2.903711] PPP MPPE Compression module registered [ 2.908750] usbcore: registered new interface driver r8152 [ 2.914010] usbcore: registered new interface driver asix [ 2.919332] usbcore: registered new interface driver ax88179_178a [ 2.925457] usbcore: registered new interface driver cdc_ether [ 2.931662] usbcore: registered new interface driver net1080 [ 2.937277] usbcore: registered new interface driver cdc_subset [ 2.943290] usbcore: registered new interface driver zaurus [ 2.948719] usbcore: registered new interface driver cdc_ncm [ 2.954398] usbcore: registered new interface driver aqc111 [ 2.960029] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.966113] ohci-pci: OHCI PCI platform driver [ 2.970700] ohci-platform: OHCI generic platform driver [ 2.976550] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.982561] usbcore: registered new interface driver uas [ 2.987001] usbcore: registered new interface driver usb-storage [ 2.992847] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.998830] mousedev: PS/2 mouse device common for all mice [ 3.003880] usbcore: registered new interface driver xpad [ 3.012104] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.014869] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.022657] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.029169] i2c /dev entries driver [ 3.032282] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.038111] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.043653] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.049039] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.054343] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.059979] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.065350] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.078707] device-mapper: uevent: version 1.0.3 [ 3.079220] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.085946] cpuidle: Initializing cpuidle driver [ 3.089719] sdhci: Secure Digital Host Controller Interface driver [ 3.094466] sdhci: Copyright(c) Pierre Ossman [ 3.098308] Synopsys Designware Multimedia Card Interface Driver [ 3.104774] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.110682] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.111479] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.123979] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.147179] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.156810] vdd-1v0: supplied by regulator-dummy [ 3.162346] vdd-1v8-hs: supplied by regulator-dummy [ 3.167306] vdd-1v8-ls: supplied by regulator-dummy [ 3.172116] vdd-1v8-ao: supplied by regulator-dummy [ 3.176112] vddio-ddr-1v1: supplied by regulator-dummy [ 3.180587] vdd-rtc: supplied by regulator-dummy [ 3.182364] spmic-ldo1: supplied by regulator-dummy [ 3.183665] vdd-ao-3v3: supplied by regulator-dummy [ 3.189842] vddio-emmc-3v3: supplied by regulator-dummy [ 3.196304] spmic-ldo4: supplied by regulator-dummy [ 3.197552] vdd-usb-3v3: supplied by regulator-dummy [ 3.203744] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.210059] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.215608] spmic-ldo8: supplied by vdd-1v8-ls [ 3.217268] gpio-510 (gpio_default): hogged as output/high [ 3.218640] gpio-511 (gpio_default): hogged as output/high [ 3.221618] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.357634] max77686-rtc max77620-rtc: registered as rtc0 [ 3.359008] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.359369] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.184134] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.185399] hid: raw HID events driver (C) Jiri Kosina [ 4.186306] usbcore: registered new interface driver usbhid [ 4.186457] usbhid: USB HID core driver [ 4.188912] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.190178] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.249159] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.323387] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.777 ms, total boot 75.035 ms) ÿá[ 4.274180] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.274760] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.275819] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.276604] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.278554] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.279140] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.279710] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.281059] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.281316] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.282871] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.284048] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.291023] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.303932] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.310302] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.315729] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.321799] denver_knobs_init:MTS_VERSION:55637613 [ 4.334802] t19x_cache tegra-cache: probed [ 4.338529] optee: probing for conduit method. [ 4.339389] optee: revision 3.16 (65cc2218) [ 4.340515] optee: dynamic shared memory is enabled [ 4.342665] optee: initialized driver [ 4.350265] nvpmodel: initialized successfully [ 4.351017] tegra_hv: get_hvd: not initialized yet [ 4.355104] user_ivc_mempool: hypervisor not present [ 4.361221] usbcore: registered new interface driver snd-usb-audio [ 4.367786] u32 classifier [ 4.368772] input device check on [ 4.372438] Actions configured [ 4.376407] Initializing XFRM netlink socket [ 4.381364] NET: Registered protocol family 10 [ 4.388082] Segment Routing with IPv6 [ 4.388516] NET: Registered protocol family 17 [ 4.392675] NET: Registered protocol family 15 [ 4.397451] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.410609] Bluetooth: RFCOMM socket layer initialized [ 4.415325] Bluetooth: RFCOMM ver 1.11 [ 4.419504] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.425089] Bluetooth: HIDP socket layer initialized [ 4.431082] 9pnet: Installing 9P2000 support [ 4.434791] Key type dns_resolver registered [ 4.440051] registered taskstats version 1 [ 4.443249] Loading compiled-in X.509 certificates [ 4.455228] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.459080] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.468817] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.471105] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.479430] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.487810] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.604257] tegra194-pcie 14160000.pcie: Link up [ 4.606983] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.607246] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.607417] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.607685] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.607881] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.608311] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.608733] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.621339] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.621860] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.622376] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.623851] pci 0004:01:00.0: supports D1 D2 [ 4.624023] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.631904] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.632298] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.632586] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.633010] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.633251] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.633430] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.639054] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.646438] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.654698] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.664974] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.669849] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.675226] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.682065] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.691178] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.692930] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.701135] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.709831] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.824747] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.825312] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.825604] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.825747] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.826049] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.826300] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.826651] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.827061] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.844132] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.844509] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.846420] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.847672] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.849025] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.850321] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.851106] pci 0005:00:00.0: Removing from iommu group 7 [ 5.851366] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.883390] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.906017] host1x 13e10000.host1x: initialized [ 5.907598] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.908502] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.909609] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.910218] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.911280] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.911888] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.912936] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.913484] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.917987] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.924753] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.934930] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.942001] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.951796] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.958739] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.968595] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.975836] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.985619] falcon 15340000.vic: Adding to iommu group 17 [ 6.000520] falcon 15340000.vic: initialized [ 6.001557] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.007526] falcon 15380000.nvjpg: initialized [ 6.008126] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.018831] falcon 154c0000.nvenc: initialized [ 6.019416] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.028994] falcon 15a80000.nvenc1: initialized [ 6.029708] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.040893] nvdec 15480000.nvdec: initialized [ 6.041859] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.051886] nvdec 15140000.nvdec1: initialized [ 6.052606] tsec 15500000.tsec: Adding to iommu group 18 [ 6.058391] tsec 15500000.tsec: initialized [ 6.058864] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.065416] tsec 15100000.tsecb: initialized [ 6.069291] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.094130] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.106943] gpio-374 (wifi-enable): hogged as output/high [ 6.107207] gpio-431 (camera-control-output-low): hogged as output/low [ 6.107566] gpio-432 (camera-control-output-low): hogged as output/low [ 6.109295] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.110625] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.111169] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.117111] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.122054] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.128107] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.133731] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.141875] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.149534] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.161095] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.165966] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.172013] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.180653] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.190251] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.197143] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.204570] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.210908] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.220824] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.227128] pva 16000000.pva0: Adding to iommu group 22 [ 6.244075] random: crng init done [ 6.254429] pva 16000000.pva0: initialized [ 6.259333] pva 16800000.pva1: Adding to iommu group 23 [ 6.270612] pva 16800000.pva1: initialized [ 6.275093] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.295469] nvdla 15880000.nvdla0: initialized [ 6.296983] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.305744] nvdla 158c0000.nvdla1: initialized [ 6.309192] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.309270] tegradc 15200000.display: Adding to iommu group 26 [ 6.309489] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.309517] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.309567] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.309630] tegradccommon 15200000.display-hub: dma mapping done [ 6.310967] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.314327] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.317922] tegradc 15210000.display: Adding to iommu group 26 [ 6.320144] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.322180] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.322416] generic_infoframe_type: 0x87 [ 6.322527] tegradc 15200000.display: DT parsed successfully [ 6.322696] tegradc 15200000.display: Display dc.0000000083aea99b registered with id=0 [ 6.327038] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.331463] tegra_cec 3960000.tegra_cec: probed [ 6.332167] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.337769] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.349354] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.355277] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.363977] kfuse 3830000.kfuse: initialized [ 6.369379] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.374668] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.382456] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.383510] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.389194] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.389665] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.401664] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.408685] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.415096] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.421760] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.432781] tegradc 15210000.display: disp0 connected to head1->sor [ 6.450718] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.459672] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.467958] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.472861] tegradc 15210000.display: DT parsed successfully [ 6.479220] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.487221] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.534698] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.535076] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.537757] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.546452] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.554704] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.561546] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.569277] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.576535] usb usb1: Product: xHCI Host Controller [ 6.581241] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.587370] usb usb1: SerialNumber: 3610000.xhci [ 6.592991] hub 1-0:1.0: USB hub found [ 6.596021] hub 1-0:1.0: 4 ports detected [ 6.600870] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.605462] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.613310] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.620923] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.628626] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.635854] usb usb2: Product: xHCI Host Controller [ 6.641101] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.647296] usb usb2: SerialNumber: 3610000.xhci [ 6.652998] hub 2-0:1.0: USB hub found [ 6.655582] hub 2-0:1.0: 4 ports detected [ 6.697347] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.703277] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.704490] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.704663] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.717397] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.718531] tegra194-cpufreq ccplex: probed with BWMGR [ 6.719799] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.720400] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.720847] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.721984] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.731019] tegra194-vi5 15c10000.vi: initialized [ 6.732493] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.733948] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.735943] generic_infoframe_type: 0x87 [ 6.742433] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.745862] mmc0: CQHCI version 5.10 [ 6.748277] tegradc 15200000.display: DT parsed successfully [ 6.748315] tegradc 15200000.display: Display dc.000000002d9ace93 registered with id=0 [ 6.748989] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.748993] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.748996] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.749377] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.749383] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.749547] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.750647] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.750651] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.752742] tegradc 15200000.display: probed [ 6.753962] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.753970] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.753978] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.787659] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.787840] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.868236] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.879773] Console: switching to colour frame buffer device 240x67 [ 6.880346] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.883785] mmc0: Command Queue Engine enabled [ 6.883790] mmc0: periodic cache flush enabled [ 6.883805] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.884447] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.884655] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.885317] tegradc 15200000.display: fb registered [ 6.888551] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.892146] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.896484] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.900980] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.908258] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.958298] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.958361] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.971330] nvethernet 2490000.ethernet: Macsec not supported [ 6.978111] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.985927] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.990450] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.997805] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.005744] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.012482] tegra-se-nvhost 15810000.se: initialized [ 7.017127] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.022713] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.029112] tegra-se-nvhost 15820000.se: initialized [ 7.034409] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.035294] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.043168] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.048740] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.056239] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.070791] tegra-se-nvhost 15830000.se: initialized [ 7.071002] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.076280] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.082302] Extcon AUX1(HDMI) enable [ 7.088849] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.091979] tegradc 15210000.display: disp1 connected to head1->sor [ 7.093097] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.093102] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.093124] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.093128] usb 1-2: Manufacturer: Generic [ 7.095002] hub 1-2:1.0: USB hub found [ 7.096206] hub 1-2:1.0: 4 ports detected [ 7.098946] tegra-se-nvhost 15840000.se: initialized [ 7.104668] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.114150] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.120041] tegradc 15210000.display: DT parsed successfully [ 7.126258] tegra_actmon d230000.actmon: in actmon_register()... [ 7.128427] tegradc 15210000.display: Display dc.0000000021bbeb8b registered with id=1 [ 7.132748] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.136768] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.142000] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.148686] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.200089] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.200964] hvc_sysfs: hypervisor is not present [ 7.201557] tegradc 15210000.display: probed [ 7.216968] tegradc 15210000.display: fb registered [ 7.241746] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.241992] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.242192] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.242268] ALSA device list: [ 7.242337] usb 2-3: Manufacturer: Generic [ 7.245710] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.249297] No soundcards found. [ 7.253015] hub 2-3:1.0: USB hub found [ 7.256230] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.261671] hub 2-3:1.0: 4 ports detected [ 7.263741] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.281015] tegradc 15200000.display: blank - powerdown [ 7.318204] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.318208] Extcon AUX1(HDMI) disable [ 7.332269] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.332274] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.341432] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.342249] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.354194] tegradc 15200000.display: unblank [ 7.355302] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.355489] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.360231] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.361230] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.363144] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.367081] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.367085] Extcon AUX1(HDMI) enable [ 7.379912] tegradc 15200000.display: sync windows ret = 247 [ 7.410583] tegradc 15210000.display: blank - powerdown [ 7.413192] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.413196] Extcon DP: HPD disabled [ 7.413200] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.413210] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.413215] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.426682] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.426708] Extcon HDMI: HPD enabled [ 7.432138] Freeing unused kernel memory: 3968K [ 7.434966] tegradc 15200000.display: hdmi: plugged [ 7.439763] Run /init as init process [ 7.503937] Root device found: mmcblk0p1 [ 7.507500] Found dev node: /dev/mmcblk0p1 [ 7.513533] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.515013] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.516535] usb 1-3: Product: Bluetooth Radio [ 7.517855] usb 1-3: Manufacturer: Realtek [ 7.519149] usb 1-3: SerialNumber: 00e04c000001 [ 7.542985] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.548363] Rootfs mounted over mmcblk0p1 [ 7.578067] Switching from initrd to actual rootfs [ 7.721339] systemd[1]: System time before build time, advancing clock. [ 7.792834] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.797754] systemd[1]: Detected architecture arm64. [ 7.846125] systemd[1]: Set hostname to . [ 8.011656] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.372587] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.374321] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.379884] systemd[1]: Created slice system-modprobe.slice. [ 8.384600] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.388981] systemd[1]: Created slice User and Session Slice. [ 8.392373] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.396639] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.399999] systemd[1]: Reached target User and Group Name Lookups. [ 8.403199] systemd[1]: Reached target Slices. [ 8.406371] systemd[1]: Reached target Swap. [ 8.410377] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.414083] systemd[1]: Listening on Syslog Socket. [ 8.417648] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.421105] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.425443] systemd[1]: Listening on Journal Audit Socket. [ 8.429182] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.433032] systemd[1]: Listening on Journal Socket. [ 8.436797] systemd[1]: Listening on udev Control Socket. [ 8.440367] systemd[1]: Listening on udev Kernel Socket. [ 8.449018] systemd[1]: Mounting Huge Pages File System... [ 8.459222] systemd[1]: Mounting POSIX Message Queue File System... [ 8.469034] systemd[1]: Mounting RPC Pipe File System... [ 8.477902] systemd[1]: Mounting Kernel Debug File System... [ 8.486782] systemd[1]: Mounting Kernel Trace File System... [ 8.497028] systemd[1]: Starting Journal Service... [ 8.506306] systemd[1]: Starting Set the console keyboard layout... [ 8.514700] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.518405] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.524947] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.533193] systemd[1]: Started Nameserver information manager. [ 8.537847] systemd[1]: Reached target Network (Pre). [ 8.546068] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.548272] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.557650] systemd[1]: Starting Load Kernel Modules... [ 8.565840] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.573910] systemd[1]: Starting udev Coldplug all Devices... [ 8.585688] systemd[1]: Mounted Huge Pages File System. [ 8.589481] systemd[1]: Mounted POSIX Message Queue File System. [ 8.593165] systemd[1]: Mounted RPC Pipe File System. [ 8.594029] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.599532] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.601550] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.602193] systemd[1]: Mounted Kernel Debug File System. [ 8.603120] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.603133] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.603139] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.603380] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.604337] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.604510] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.604521] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.617725] systemd[1]: Mounted Kernel Trace File System. [ 8.624898] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.629892] systemd[1]: nvfb-udev.service: Succeeded. [ 8.633995] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.643822] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.657321] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.659151] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.671607] systemd[1]: Starting Load/Save Random Seed... [ 8.679863] systemd[1]: Starting Create System Users... [ 8.699441] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.699441] [ 8.738973] systemd[1]: Finished Load/Save Random Seed. [ 8.746078] systemd[1]: Finished Load Kernel Modules. [ 8.751180] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.757852] systemd[1]: Mounting Kernel Configuration File System... [ 8.766112] systemd[1]: Started OP-TEE Client Supplicant. [ 8.774394] systemd[1]: Starting Apply Kernel Variables... [ 8.784810] systemd[1]: Finished Set the console keyboard layout. [ 8.789126] systemd[1]: Mounted Kernel Configuration File System. [ 8.798958] systemd[1]: Finished Create System Users. [ 10.207247] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.213796] imx219 9-0010: board setup failed [ 10.213894] imx219: probe of 9-0010 failed with error -121 [ 10.225989] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.236350] imx219 10-0010: board setup failed [ 10.237708] imx219: probe of 10-0010 failed with error -121 [ 10.299505] hot-surface-alert cooling state: 0 -> 1 [ 11.274715] using random self ethernet address [ 11.285353] using random host ethernet address [ 11.740484] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.742295] Creating 1 MTD partitions on "spi6.0": [ 11.743965] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.703959] using random self ethernet address [ 12.705643] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.833943] nvidia: loading out-of-tree module taints kernel. [ 58.273664] watchdog: watchdog0: watchdog did not stop! [ 58.729867] Trying to unregister non-registered hwtime source [ 61.792309] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.793835] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.325] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/Tÿâclk_early initialized ÿäC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secuÿât194_ec_get_ec_list: found 45 ecs ÿäre externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuratiÿâpg_post initialized profile initialized fuse_late initialized extrentering main console loop ] as_post initialized bpmp: init complete ÿäon might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.210] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.211] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.211] I> 2) Base:0xc9800000 Size:0x00200000 [0003.212] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.219] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.228] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.237] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.250] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.259] I> 14) Base:0x40048000 Size:0x00002000 [0003.263] I> 15) Base:0xaf000000 Size:0x00004000 [0003.268] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.277] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.286] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.295] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.308] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.317] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.321] I> 28) Base:0xc8400000 Size:0x00200000 [0003.326] I> 29) Base:0xc8800000 Size:0x00400000 [0003.330] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.335] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.344] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.353] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.375] I> 40) Base:0x00000000 Size:0x00000000 [0003.379] I> 41) Base:0x00000000 Size:0x00000000 [0003.384] I> 42) Base:0x00000000 Size:0x00000000 [0003.388] I> 43) Base:0x00000000 Size:0x00000000 [0003.393] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.402] GIC-SPI Target CPU: 0 [0003.405] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.417] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.427] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.435] initializing platform [0003.438] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.447] I> Bl_dtb @0xadf00000 [0003.450] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.482] I> register 'maxim' power off handle [0003.484] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.499] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.525] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.530] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.544] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.557] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.566] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.575] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.643] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.644] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.645] I> width = 720, height = 480, frequency = 26973026 [0003.649] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.688] I> width = 3840, height = 2160, frequency = 296703296 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.717] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.733] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.743] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000919] Console: colour dummy device 80x25 [ 0.002424] printk: console [tty0] enabled [ 0.002484] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002520] pid_max: default: 32768 minimum: 301 [ 0.002738] LSM: Security Framework initializing [ 0.002796] Yama: becoming mindful. [ 0.002837] SELinux: Initializing. [ 0.003044] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003082] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006072] rcu: Hierarchical SRCU implementation. [ 0.006364] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007313] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007362] DTB Build time: Aug 10 2022 20:31:49 [ 0.011687] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011959] Remapping and enabling EFI services. [ 0.014436] smp: Bringing up secondary CPUs ... [ 0.043550] Detected PIPT I-cache on CPU1 [ 0.043633] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073112] Detected PIPT I-cache on CPU2 [ 0.073258] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102856] Detected PIPT I-cache on CPU3 [ 0.102994] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132647] Detected PIPT I-cache on CPU4 [ 0.132798] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162493] Detected PIPT I-cache on CPU5 [ 0.162639] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.162979] smp: Brought up 1 node, 6 CPUs [ 0.163189] SMP: Total of 6 processors activated. [ 0.163220] CPU features: detected: Privileged Access Never [ 0.163232] CPU features: detected: LSE atomic instructions [ 0.163244] CPU features: detected: User Access Override [ 0.163257] CPU features: detected: 32-bit EL0 Support [ 0.163270] CPU features: detected: RAS Extension Support [ 0.163282] CPU features: detected: CRC32 instructions [ 0.163295] CPU features: detected: 32-bit EL1 Support [ 0.235123] CPU: All CPU(s) started at EL2 [ 0.241308] devtmpfs: initialized [ 0.289405] Registered cp15_barrier emulation handler [ 0.289524] Registered setend emulation handler [ 0.289543] KASLR enabled [ 0.289815] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289837] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291229] pinctrl core: initialized pinctrl subsystem [ 0.292202] SMBIOS 3.0.0 present. [ 0.292245] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292918] NET: Registered protocol family 16 [ 0.294992] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295498] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296188] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296245] audit: initializing netlink subsys (disabled) [ 0.296510] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296917] thermal_sys: Registered thermal governor 'step_wise' [ 0.296925] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296939] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299093] cpuidle: using governor menu [ 0.299548] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299961] ASID allocator initialised with 32768 entries [ 0.300178] Serial: AMBA PL011 UART driver [ 0.304091] Tegra reboot handler registered. [ 0.378748] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.378853] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.379047] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.379087] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.379242] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.379299] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.379413] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.379452] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.379572] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.379612] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.382378] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.382455] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.382487] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.382513] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.382542] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.382567] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.382605] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.382638] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.382663] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.382685] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.382708] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.382730] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.382753] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.382793] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.382816] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.382854] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.382894] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.382990] mc-err: mcerr ops are set to t19x [ 0.395275] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.395296] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.395308] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.395320] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.402927] ACPI: Interpreter disabled. [ 0.404131] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.405365] iommu: Default domain type: Translated [ 0.405433] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.405808] SCSI subsystem initialized [ 0.405951] usbcore: registered new interface driver usbfs [ 0.405990] usbcore: registered new interface driver hub [ 0.406022] usbcore: registered new device driver usb [ 0.406532] mc: Linux media interface: v0.10 [ 0.406563] videodev: Linux video capture interface: v2.00 [ 0.407003] pps_core: LinuxPPS API ver. 1 registered [ 0.407018] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.407041] PTP clock support registered [ 0.407302] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.407593] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.407646] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.408360] Registered efivars operations [ 0.413774] FPGA manager framework [ 0.413875] Advanced Linux Sound Architecture Driver Initialized. [ 0.414464] Bluetooth: Core ver 2.22 [ 0.414502] NET: Registered protocol family 31 [ 0.414513] Bluetooth: HCI device and connection manager initialized [ 0.414528] Bluetooth: HCI socket layer initialized [ 0.414584] Bluetooth: L2CAP socket layer initialized [ 0.414607] Bluetooth: SCO socket layer initialized [ 0.417232] camchar: rtcpu character device driver loaded [ 0.418476] clocksource: Switched to clocksource arch_sys_counter [ 0.831575] VFS: Disk quotas dquot_6.6.0 [ 0.831697] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.832127] pnp: PnP ACPI: disabled [ 0.846920] la/ptsa driver initialized. [ 0.847112] NET: Registered protocol family 2 [ 0.847350] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.854868] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.855055] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.855433] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.856051] TCP: Hash tables configured (established 65536 bind 65536) [ 0.856222] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.856362] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.856627] NET: Registered protocol family 1 [ 0.857422] RPC: Registered named UNIX socket transport module. [ 0.857472] RPC: Registered udp transport module. [ 0.857493] RPC: Registered tcp transport module. [ 0.857514] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.857560] PCI: CLS 0 bytes, default 64 [ 0.857933] Trying to unpack rootfs image as initramfs... [ 1.127013] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.130111] Freeing initrd memory: 8196K [ 1.135146] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.135206] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.135255] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.135693] kvm [1]: IPA Size Limit: 40 bits [ 1.136213] kvm [1]: vgic interrupt IRQ9 [ 1.136733] kvm [1]: VHE mode initialized successfully [ 1.138341] Initialise system trusted keyrings [ 1.138701] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.144665] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.145470] NFS: Registering the id_resolver key type [ 1.145505] Key type id_resolver registered [ 1.145519] Key type id_legacy registered [ 1.145615] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.145639] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.145677] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.155513] NET: Registered protocol family 38 [ 1.155538] Key type asymmetric registered [ 1.155552] Asymmetric key parser 'x509' registered [ 1.155600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.155888] io scheduler mq-deadline registered [ 1.155934] io scheduler kyber registered [ 1.161931] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.164884] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.164965] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.165038] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.165103] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.165169] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.171191] scrncapt: init (heads:4 wins:6 planes:4) [ 1.171572] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.172491] EINJ: ACPI disabled. [ 1.175861] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.175884] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.175899] tegra-pmc: ### PMC reset level: L1 [ 1.175911] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.175956] tegra-pmc: PMC Prod config success [ 1.181084] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.200901] random: fast init done [ 1.209277] printk: console [ttyTCU0] enabled [ 2.737983] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.743079] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.747708] arm-smmu 10000000.iommu: stage 1 translation [ 2.752836] arm-smmu 10000000.iommu: stage 2 translation [ 2.758604] arm-smmu 10000000.iommu: nested translation [ 2.763675] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.770852] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.781746] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.784241] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.790795] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.798165] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.803859] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.808557] arm-smmu 12000000.iommu: stage 1 translation [ 2.813811] arm-smmu 12000000.iommu: stage 2 translation [ 2.819495] arm-smmu 12000000.iommu: nested translation [ 2.824662] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.832101] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.842653] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.845197] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.851525] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.859151] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.868648] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.871951] tegra_profiler: auth: init [ 2.876283] THERMAL EST: found 3 subdevs [ 2.879876] THERMAL EST num_resources: 0 [ 2.883463] [THERMAL EST subdev 0] [ 2.887041] [THERMAL EST subdev 1] [ 2.890460] [THERMAL EST subdev 2] [ 2.893422] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.899880] THERMAL EST: thz register success. [ 2.904150] THERMAL EST: end of probe, return err: 0 [ 2.909719] nvsciipc: loaded module [ 2.916714] tun: Universal TUN/TAP device driver, 1.6 [ 2.918929] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.925203] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.931023] e1000e: Intel(R) PRO/1000 Network Driver [ 2.935708] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.942036] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.947329] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.953482] PPP generic driver version 2.4.2 [ 2.957545] PPP BSD Compression module registered [ 2.962303] PPP Deflate Compression module registered [ 2.967308] PPP MPPE Compression module registered [ 2.972317] usbcore: registered new interface driver r8152 [ 2.978087] usbcore: registered new interface driver asix [ 2.983153] usbcore: registered new interface driver ax88179_178a [ 2.989276] usbcore: registered new interface driver cdc_ether [ 2.995483] usbcore: registered new interface driver net1080 [ 3.000826] usbcore: registered new interface driver cdc_subset [ 3.007131] usbcore: registered new interface driver zaurus [ 3.012854] usbcore: registered new interface driver cdc_ncm [ 3.018238] usbcore: registered new interface driver aqc111 [ 3.023899] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.030220] ohci-pci: OHCI PCI platform driver [ 3.034258] ohci-platform: OHCI generic platform driver [ 3.040118] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.046704] usbcore: registered new interface driver uas [ 3.050813] usbcore: registered new interface driver usb-storage [ 3.056684] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.062932] mousedev: PS/2 mouse device common for all mice [ 3.067984] usbcore: registered new interface driver xpad [ 3.075672] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.078453] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.086226] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.092834] i2c /dev entries driver [ 3.096129] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.101852] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.107209] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.112647] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.118204] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.123459] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.128877] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.142294] device-mapper: uevent: version 1.0.3 [ 3.142778] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.149625] cpuidle: Initializing cpuidle driver [ 3.153353] sdhci: Secure Digital Host Controller Interface driver [ 3.158052] sdhci: Copyright(c) Pierre Ossman [ 3.162152] Synopsys Designware Multimedia Card Interface Driver [ 3.168357] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.174329] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.180596] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.187637] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.209660] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.219789] vdd-1v0: supplied by regulator-dummy [ 3.225318] vdd-1v8-hs: supplied by regulator-dummy [ 3.230192] vdd-1v8-ls: supplied by regulator-dummy [ 3.235033] vdd-1v8-ao: supplied by regulator-dummy [ 3.238992] vddio-ddr-1v1: supplied by regulator-dummy [ 3.243569] vdd-rtc: supplied by regulator-dummy [ 3.245326] spmic-ldo1: supplied by regulator-dummy [ 3.246656] vdd-ao-3v3: supplied by regulator-dummy [ 3.252867] vddio-emmc-3v3: supplied by regulator-dummy [ 3.259210] spmic-ldo4: supplied by regulator-dummy [ 3.260524] vdd-usb-3v3: supplied by regulator-dummy [ 3.266758] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.273046] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.278589] spmic-ldo8: supplied by vdd-1v8-ls [ 3.280091] gpio-510 (gpio_default): hogged as output/high [ 3.281461] gpio-511 (gpio_default): hogged as output/high [ 3.284348] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.420375] max77686-rtc max77620-rtc: registered as rtc0 [ 3.421434] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.421737] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.251676] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.252878] hid: raw HID events driver (C) Jiri Kosina [ 4.253737] usbcore: registered new interface driver usbhid [ 4.253883] usbhid: USB HID core driver [ 4.256110] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.257453] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.096466] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.170554] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.777 ms, total boot 74.894 ms) ÿá[ 4.341639] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.342385] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.343777] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.344871] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.346972] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.347811] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.348599] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.350264] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.350637] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.354132] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.358509] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.364649] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.369623] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.375964] denver_knobs_init:MTS_VERSION:55637613 [ 4.387900] t19x_cache tegra-cache: probed [ 4.390877] optee: probing for conduit method. [ 4.391756] optee: revision 3.16 (65cc2218) [ 4.392797] optee: dynamic shared memory is enabled [ 4.396550] optee: initialized driver [ 4.403781] nvpmodel: initialized successfully [ 4.404380] tegra_hv: get_hvd: not initialized yet [ 4.408999] user_ivc_mempool: hypervisor not present [ 4.414703] usbcore: registered new interface driver snd-usb-audio [ 4.421201] u32 classifier [ 4.422609] input device check on [ 4.426134] Actions configured [ 4.430154] Initializing XFRM netlink socket [ 4.435176] NET: Registered protocol family 10 [ 4.440851] Segment Routing with IPv6 [ 4.442045] NET: Registered protocol family 17 [ 4.446609] NET: Registered protocol family 15 [ 4.450754] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.464321] Bluetooth: RFCOMM socket layer initialized [ 4.469167] Bluetooth: RFCOMM ver 1.11 [ 4.472914] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.479033] Bluetooth: HIDP socket layer initialized [ 4.484693] 9pnet: Installing 9P2000 support [ 4.488249] Key type dns_resolver registered [ 4.493981] registered taskstats version 1 [ 4.496697] Loading compiled-in X.509 certificates [ 4.508426] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.512519] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.522344] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.524638] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.533149] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.541498] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.658551] tegra194-pcie 14160000.pcie: Link up [ 4.661405] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.661612] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.661772] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.662016] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.662214] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.662622] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.663064] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.672481] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.673001] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.673492] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.675073] pci 0004:01:00.0: supports D1 D2 [ 4.675256] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.683905] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.684365] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.684611] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.685040] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.685295] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.687093] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.693117] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.700465] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.709322] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.719531] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.723890] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.729425] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.736191] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.745149] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.747259] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.755716] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.763897] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.879266] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.879820] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.880076] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.880228] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.880505] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.880698] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.881056] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.881494] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.896021] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.896356] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.897733] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.898925] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.900213] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.901654] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.902557] pci 0005:00:00.0: Removing from iommu group 7 [ 5.902870] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.933787] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.955845] host1x 13e10000.host1x: initialized [ 5.957432] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.958390] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.959739] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.960377] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.961285] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.961884] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.962982] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.963626] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.972549] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.979324] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.989255] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.996098] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.006298] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.013155] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.022983] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.030098] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.040240] falcon 15340000.vic: Adding to iommu group 17 [ 6.054405] falcon 15340000.vic: initialized [ 6.055426] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.060642] falcon 15380000.nvjpg: initialized [ 6.061310] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.073027] falcon 154c0000.nvenc: initialized [ 6.073553] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.082564] falcon 15a80000.nvenc1: initialized [ 6.083167] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.095076] nvdec 15480000.nvdec: initialized [ 6.095740] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.104283] nvdec 15140000.nvdec1: initialized [ 6.104809] tsec 15500000.tsec: Adding to iommu group 18 [ 6.110992] tsec 15500000.tsec: initialized [ 6.111436] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.120572] tsec 15100000.tsecb: initialized [ 6.124351] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.148358] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.159716] gpio-374 (wifi-enable): hogged as output/high [ 6.160027] gpio-431 (camera-control-output-low): hogged as output/low [ 6.160318] gpio-432 (camera-control-output-low): hogged as output/low [ 6.161963] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.163940] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.164812] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.171553] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.177181] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.182763] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.188014] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.196045] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.204094] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.215430] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.220655] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.226556] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.235136] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.244806] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.251936] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.259624] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.265632] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.275394] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.281372] pva 16000000.pva0: Adding to iommu group 22 [ 6.308052] pva 16000000.pva0: initialized [ 6.313287] pva 16800000.pva1: Adding to iommu group 23 [ 6.325199] pva 16800000.pva1: initialized [ 6.329667] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.341982] nvdla 15880000.nvdla0: initialized [ 6.343291] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.351287] nvdla 158c0000.nvdla1: initialized [ 6.354771] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.355078] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.355532] tegradc 15200000.display: Adding to iommu group 26 [ 6.355543] tegradc 15210000.display: Adding to iommu group 26 [ 6.355608] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.356843] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.357166] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.363183] tegra_cec 3960000.tegra_cec: probed [ 6.363499] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.368234] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.374087] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.374239] tegradccommon 15200000.display-hub: dma mapping done [ 6.381540] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.400145] kfuse 3830000.kfuse: initialized [ 6.404954] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.410391] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.417519] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.423924] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.433326] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.438026] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.447325] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.452987] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.474005] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.474348] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.476526] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.484686] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.493115] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.499557] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.507520] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.514433] usb usb1: Product: xHCI Host Controller [ 6.519648] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.525943] usb usb1: SerialNumber: 3610000.xhci [ 6.531562] hub 1-0:1.0: USB hub found [ 6.534570] hub 1-0:1.0: 4 ports detected [ 6.538999] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.543650] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.551266] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.559210] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.567100] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.574377] usb usb2: Product: xHCI Host Controller [ 6.579318] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.585302] usb usb2: SerialNumber: 3610000.xhci [ 6.590988] hub 2-0:1.0: USB hub found [ 6.593752] hub 2-0:1.0: 4 ports detected [ 6.635653] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.641397] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.642919] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.643113] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.656677] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1904000 KHz, changing to: 1907200 KHz [ 6.657747] tegra194-cpufreq ccplex: probed with BWMGR [ 6.658793] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.659473] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.659920] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.661156] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.670476] tegra194-vi5 15c10000.vi: initialized [ 6.670810] mmc0: CQHCI version 5.10 [ 6.672456] tegradc 15210000.display: disp0 connected to head1->sor [ 6.673310] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.677600] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.684139] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.691322] tegradc 15210000.display: DT parsed successfully [ 6.699156] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.704551] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.704753] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.710920] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.710926] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.710931] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.718492] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.719130] generic_infoframe_type: 0x87 [ 6.719721] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.725186] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.725196] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.732313] tegradc 15200000.display: DT parsed successfully [ 6.739999] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.745081] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.757422] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.770149] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.777148] nvethernet 2490000.ethernet: Macsec not supported [ 6.782490] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.782820] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.791810] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.798023] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.806029] mmc0: Command Queue Engine enabled [ 6.806034] mmc0: periodic cache flush enabled [ 6.806048] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.806527] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.806784] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.807545] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.807657] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.807770] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.808746] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.810611] tegra-se-nvhost 15810000.se: initialized [ 6.815186] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.815852] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.816046] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.816806] tegra-se-nvhost 15820000.se: initialized [ 6.818849] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.819269] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.819984] tegra-se-nvhost 15830000.se: initialized [ 6.820231] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.821286] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.821706] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.822397] tegra-se-nvhost 15840000.se: initialized [ 6.824045] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.825196] tegra_actmon d230000.actmon: in actmon_register()... [ 6.825393] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.825728] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.826011] hvc_sysfs: hypervisor is not present [ 6.855149] ALSA device list: [ 6.856337] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.856342] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.866806] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.866942] No soundcards found. [ 6.868570] ************************************** [ 6.868578] CPU:0, Error:cbb-noc [ 7.040952] Error Logger : 0 [ 7.040962] ErrLog0 : 0x80030000 [ 7.040985] Transaction Type : RD - Read, Incrementing [ 7.052852] Error Code : SLV [ 7.052856] Error Source : Target [ 7.052859] Error Description : Target error detected by CBB slave [ 7.052886] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 7.073946] Packet header Lock : 0 [ 7.077694] Packet header Len1 : 3 [ 7.081368] NOC protocol version : version >= 2.7 [ 7.086099] ErrLog1 : 0x352422 [ 7.089769] ErrLog2 : 0x0 [ 7.092570] RouteId : 0x352422 [ 7.095982] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 7.100969] Targflow : host1x_p2pm/T/host1x_p2pm [ 7.105782] TargSubRange : 18 [ 7.109018] SeqId : 0 [ 7.111562] ErrLog3 : 0x4045c [ 7.114799] ErrLog4 : 0x0 [ 7.117945] Address accessed : 0x15b4045c [ 7.122150] ErrLog5 : 0x889f851 [ 7.125387] Non-Modify : 0x1 [ 7.128799] AXI ID : 0x11 [ 7.131950] Master ID : CCPLEX [ 7.135274] Security Group(GRPSEC): 0x7e [ 7.139733] Cache : 0x1 -- Bufferable [ 7.143936] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.150500] FALCONSEC : 0x0 [ 7.153907] Virtual Queuing Channel(VQC): 0x0 [ 7.158545] ************************************** [ 7.163585] ------------[ cut here ]------------ [ 7.167824] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.174389] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.179895] Modules linked in: [ 7.182874] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 7.189520] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.201772] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.207814] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.212275] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.217256] sp : ffff800010003b30 [ 7.220676] x29: ffff800010003b30 x28: 0000000000000001 [ 7.226096] x27: 0000000000000005 x26: ffffc98cc14f3f58 [ 7.231262] x25: ffffc98cc1e4ce10 x24: 0000000000000001 [ 7.236687] x23: ffffc98cc17e7000 x22: ffffc98cc1c6ea00 [ 7.242282] x21: 000000000000000f x20: ffff0da340ea5880 [ 7.247539] x19: ffffc98cc1c6ea00 x18: 0000000000000010 [ 7.252962] x17: 0000000000000007 x16: 000000000000000e [ 7.258299] x15: ffffc98cc1ae2bf0 x14: 0720072007200720 [ 7.263812] x13: 0720072007200720 x12: 0720072007200720 [ 7.269324] x11: 0720072007200720 x10: 0720072007200720 [ 7.274840] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.280351] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.286136] x5 : 0000000000057fa8 x4 : ffffc98cc1af7968 [ 7.291544] x3 : 00000000ffffffff x2 : ffffc98cbff8e090 [ 7.296897] x1 : ffffc98cc1ae2680 x0 : 0000000000010101 [ 7.301962] Call trace: [ 7.304672] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.308979] __handle_irq_event_percpu+0x68/0x2a0 [ 7.313427] handle_irq_event_percpu+0x40/0xa0 [ 7.317992] handle_irq_event+0x50/0xf0 [ 7.321479] handle_fasteoi_irq+0xc0/0x170 [ 7.325504] generic_handle_irq+0x40/0x60 [ 7.329801] __handle_domain_irq+0x70/0xd0 [ 7.333728] efi_header_end+0xb0/0xf0 [ 7.337226] el1_irq+0xd0/0x180 [ 7.340457] __do_softirq+0xb4/0x3e8 [ 7.343895] irq_exit+0xc0/0xe0 [ 7.347109] __handle_domain_irq+0x74/0xd0 [ 7.351132] efi_header_end+0xb0/0xf0 [ 7.354551] el1_irq+0xd0/0x180 [ 7.357529] cpuidle_enter_state+0xb8/0x410 [ 7.361808] cpuidle_enter+0x40/0x60 [ 7.365485] call_cpuidle+0x44/0x80 [ 7.368984] do_idle+0x208/0x270 [ 7.372220] cpu_startup_entry+0x2c/0x70 [ 7.376072] rest_init+0xdc/0xe8 [ 7.379247] arch_call_rest_init+0x18/0x20 [ 7.383427] start_kernel+0x514/0x54c [ 7.387279] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.393508] ---[ end trace 78246601bbb1c519 ]--- [ 7.397775] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.405557] SMP: stopping secondary CPUs [ 7.409426] Kernel Offset: 0x498cafdd0000 from 0xffff800010000000 [ 7.415725] PHYS_OFFSET: 0xfffff25dc0000000 [ 7.419563] CPU features: 0x8240002,03802a30 [ 7.424281] Memory Limit: none [ 7.427179] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.612] E> cannot find any other nvdisp nodes [0003.628] I> edid read success [0003.641] I> edid read success [0003.641] I> width = 640, height = 480, frequency = 25174825 [0003.642] I> width = 1920, height = 1080, frequency = 148500000 [0003.642] I> width = 1280, height = 768, frequency = 79500000 [0003.642] I> width = 1360, height = 768, frequency = 85500000 [0003.643] I> width = 720, height = 480, frequency = 26973026 [0003.647] I> width = 720, height = 576, frequency = 26973026 [0003.652] I> width = 1280, height = 720, frequency = 74175824 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1920, height = 1080, frequency = 148351648 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 720, height = 480, frequency = 26973026 [0003.681] I> width = 720, height = 576, frequency = 26973026 [0003.686] I> width = 3840, height = 2160, frequency = 296703296 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 4096, height = 2160, frequency = 296703296 [0003.715] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.726] I> hdmi_enable, starting HDMI initialisation [0003.731] I> hdmi_enable, HDMI initialisation complete [0003.741] initializing target [0003.741] calling apps_init() [0003.742] starting app kernel_boot_app [0003.743] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000665] Console: colour dummy device 80x25 [ 0.002153] printk: console [tty0] enabled [ 0.002215] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002258] pid_max: default: 32768 minimum: 301 [ 0.002451] LSM: Security Framework initializing [ 0.002509] Yama: becoming mindful. [ 0.002551] SELinux: Initializing. [ 0.002741] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002779] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005719] rcu: Hierarchical SRCU implementation. [ 0.006023] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006694] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006728] DTB Build time: Aug 10 2022 20:31:49 [ 0.009454] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009678] Remapping and enabling EFI services. [ 0.011835] smp: Bringing up secondary CPUs ... [ 0.040953] Detected PIPT I-cache on CPU1 [ 0.041059] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072875] Detected PIPT I-cache on CPU2 [ 0.073030] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102761] Detected PIPT I-cache on CPU3 [ 0.102845] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132773] Detected PIPT I-cache on CPU4 [ 0.132855] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162541] Detected PIPT I-cache on CPU5 [ 0.162692] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163155] smp: Brought up 1 node, 6 CPUs [ 0.163332] SMP: Total of 6 processors activated. [ 0.163400] CPU features: detected: Privileged Access Never [ 0.163422] CPU features: detected: LSE atomic instructions [ 0.163452] CPU features: detected: User Access Override [ 0.163465] CPU features: detected: 32-bit EL0 Support [ 0.163478] CPU features: detected: RAS Extension Support [ 0.163490] CPU features: detected: CRC32 instructions [ 0.163502] CPU features: detected: 32-bit EL1 Support [ 0.234950] CPU: All CPU(s) started at EL2 [ 0.240279] devtmpfs: initialized [ 0.312989] Registered cp15_barrier emulation handler [ 0.313138] Registered setend emulation handler [ 0.313184] KASLR enabled [ 0.313547] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.313596] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.315821] pinctrl core: initialized pinctrl subsystem [ 0.316888] SMBIOS 3.0.0 present. [ 0.316959] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.317953] NET: Registered protocol family 16 [ 0.320680] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.321489] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.322557] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.322646] audit: initializing netlink subsys (disabled) [ 0.322947] audit: type=2000 audit(0.320:1): state=initialized audit_enabled=0 res=1 [ 0.323570] thermal_sys: Registered thermal governor 'step_wise' [ 0.323582] thermal_sys: Registered thermal governor 'power_allocator' [ 0.323612] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.326965] cpuidle: using governor menu [ 0.327742] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.328190] ASID allocator initialised with 32768 entries [ 0.328594] Serial: AMBA PL011 UART driver [ 0.333577] Tegra reboot handler registered. [ 0.422060] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.422197] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.422414] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.422472] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.422644] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.422704] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.422935] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.422991] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.423209] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.423266] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.426898] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.426945] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.426994] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.427044] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.427100] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.427168] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.427234] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.427272] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.427340] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.427384] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.427446] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.427484] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.427521] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.427558] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.427595] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.427631] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.427668] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.427798] mc-err: mcerr ops are set to t19x [ 0.444380] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.444407] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.444425] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.444441] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.451909] ACPI: Interpreter disabled. [ 0.453457] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.455265] iommu: Default domain type: Translated [ 0.455363] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.455969] SCSI subsystem initialized [ 0.456229] usbcore: registered new interface driver usbfs [ 0.456309] usbcore: registered new interface driver hub [ 0.456361] usbcore: registered new device driver usb [ 0.456936] mc: Linux media interface: v0.10 [ 0.457009] videodev: Linux video capture interface: v2.00 [ 0.457489] pps_core: LinuxPPS API ver. 1 registered [ 0.457506] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.457535] PTP clock support registered [ 0.457834] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.458189] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.458315] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.459161] Registered efivars operations [ 0.466922] FPGA manager framework [ 0.467079] Advanced Linux Sound Architecture Driver Initialized. [ 0.467876] Bluetooth: Core ver 2.22 [ 0.467925] NET: Registered protocol family 31 [ 0.467942] Bluetooth: HCI device and connection manager initialized [ 0.467963] Bluetooth: HCI socket layer initialized [ 0.467980] Bluetooth: L2CAP socket layer initialized [ 0.468007] Bluetooth: SCO socket layer initialized [ 0.469934] camchar: rtcpu character device driver loaded [ 0.470799] clocksource: Switched to clocksource arch_sys_counter [ 0.864947] VFS: Disk quotas dquot_6.6.0 [ 0.865041] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.865451] pnp: PnP ACPI: disabled [ 0.878812] la/ptsa driver initialized. [ 0.878963] NET: Registered protocol family 2 [ 0.879228] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.886949] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.887109] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.887496] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.888124] TCP: Hash tables configured (established 65536 bind 65536) [ 0.888291] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.888422] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.888753] NET: Registered protocol family 1 [ 0.889619] RPC: Registered named UNIX socket transport module. [ 0.889657] RPC: Registered udp transport module. [ 0.889678] RPC: Registered tcp transport module. [ 0.889698] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.889729] PCI: CLS 0 bytes, default 64 [ 0.890005] Trying to unpack rootfs image as initramfs... [ 1.158544] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.161869] Freeing initrd memory: 8196K [ 1.166142] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.166174] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.166229] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.166530] kvm [1]: IPA Size Limit: 40 bits [ 1.167067] kvm [1]: vgic interrupt IRQ9 [ 1.167522] kvm [1]: VHE mode initialized successfully [ 1.168962] Initialise system trusted keyrings [ 1.169250] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.175592] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.176472] NFS: Registering the id_resolver key type [ 1.176511] Key type id_resolver registered [ 1.176526] Key type id_legacy registered [ 1.176641] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.176694] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.176736] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.186537] NET: Registered protocol family 38 [ 1.186560] Key type asymmetric registered [ 1.186574] Asymmetric key parser 'x509' registered [ 1.186624] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.186964] io scheduler mq-deadline registered [ 1.186984] io scheduler kyber registered [ 1.193054] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.196054] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.196132] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.196235] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.196340] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.196438] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.201858] scrncapt: init (heads:4 wins:6 planes:4) [ 1.201999] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.203054] EINJ: ACPI disabled. [ 1.206419] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.206444] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.206491] tegra-pmc: ### PMC reset level: L1 [ 1.206505] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.206555] tegra-pmc: PMC Prod config success [ 1.211605] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.216560] random: fast init done [ 1.217535] printk: console [ttyTCU0] enabled [ 2.768797] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.773478] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.778103] arm-smmu 10000000.iommu: stage 1 translation [ 2.783596] arm-smmu 10000000.iommu: stage 2 translation [ 2.789036] arm-smmu 10000000.iommu: nested translation [ 2.794114] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.801292] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.810358] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.814700] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.821234] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.828995] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.834535] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.839005] arm-smmu 12000000.iommu: stage 1 translation [ 2.844761] arm-smmu 12000000.iommu: stage 2 translation [ 2.849939] arm-smmu 12000000.iommu: nested translation [ 2.855642] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.862788] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.871472] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.875916] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.882213] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.889794] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.899279] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.902948] tegra_profiler: auth: init [ 2.907082] THERMAL EST: found 3 subdevs [ 2.910548] THERMAL EST num_resources: 0 [ 2.914418] [THERMAL EST subdev 0] [ 2.917756] [THERMAL EST subdev 1] [ 2.921144] [THERMAL EST subdev 2] [ 2.924147] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.930835] THERMAL EST: thz register success. [ 2.935078] THERMAL EST: end of probe, return err: 0 [ 2.940041] nvsciipc: loaded module [ 2.946358] tun: Universal TUN/TAP device driver, 1.6 [ 2.949480] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.956168] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.961718] e1000e: Intel(R) PRO/1000 Network Driver [ 2.966645] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.972464] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.977760] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.984122] PPP generic driver version 2.4.2 [ 2.988478] PPP BSD Compression module registered [ 2.992741] PPP Deflate Compression module registered [ 2.998246] PPP MPPE Compression module registered [ 3.003268] usbcore: registered new interface driver r8152 [ 3.008500] usbcore: registered new interface driver asix [ 3.014093] usbcore: registered new interface driver ax88179_178a [ 3.019960] usbcore: registered new interface driver cdc_ether [ 3.025911] usbcore: registered new interface driver net1080 [ 3.031520] usbcore: registered new interface driver cdc_subset [ 3.037547] usbcore: registered new interface driver zaurus [ 3.043242] usbcore: registered new interface driver cdc_ncm [ 3.048921] usbcore: registered new interface driver aqc111 [ 3.054586] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.060695] ohci-pci: OHCI PCI platform driver [ 3.064981] ohci-platform: OHCI generic platform driver [ 3.070901] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.077142] usbcore: registered new interface driver uas [ 3.081265] usbcore: registered new interface driver usb-storage [ 3.087740] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.093249] mousedev: PS/2 mouse device common for all mice [ 3.098646] usbcore: registered new interface driver xpad [ 3.106509] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.109181] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.116918] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.123689] i2c /dev entries driver [ 3.126749] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.132465] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.138287] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.143555] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.148896] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.154088] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.159521] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.171358] device-mapper: uevent: version 1.0.3 [ 3.171727] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.179692] cpuidle: Initializing cpuidle driver [ 3.183776] sdhci: Secure Digital Host Controller Interface driver [ 3.188741] sdhci: Copyright(c) Pierre Ossman [ 3.193097] Synopsys Designware Multimedia Card Interface Driver [ 3.198990] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.205277] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.205816] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.218373] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.237076] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.245547] vdd-1v0: supplied by regulator-dummy [ 3.250869] vdd-1v8-hs: supplied by regulator-dummy [ 3.255482] vdd-1v8-ls: supplied by regulator-dummy [ 3.260269] vdd-1v8-ao: supplied by regulator-dummy [ 3.264179] vddio-ddr-1v1: supplied by regulator-dummy [ 3.268458] vdd-rtc: supplied by regulator-dummy [ 3.270068] spmic-ldo1: supplied by regulator-dummy [ 3.271192] vdd-ao-3v3: supplied by regulator-dummy [ 3.277146] vddio-emmc-3v3: supplied by regulator-dummy [ 3.283273] spmic-ldo4: supplied by regulator-dummy [ 3.284354] vdd-usb-3v3: supplied by regulator-dummy [ 3.290327] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.296370] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.301698] spmic-ldo8: supplied by vdd-1v8-ls [ 3.303035] gpio-510 (gpio_default): hogged as output/high [ 3.305228] gpio-511 (gpio_default): hogged as output/high [ 3.311773] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.450486] max77686-rtc max77620-rtc: registered as rtc0 [ 3.451684] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.451980] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.148374] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.149298] hid: raw HID events driver (C) Jiri Kosina [ 4.150009] usbcore: registered new interface driver usbhid [ 4.150149] usbhid: USB HID core driver [ 4.151821] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.152871] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.229116] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.304821] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.516 ms) ÿá[ 4.238276] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.238977] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.239940] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.240612] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.242259] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.243045] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.243608] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.244836] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.245144] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.247000] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.254700] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.261236] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.266004] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.271950] denver_knobs_init:MTS_VERSION:55637613 [ 4.284518] t19x_cache tegra-cache: probed [ 4.287394] optee: probing for conduit method. [ 4.288244] optee: revision 3.16 (65cc2218) [ 4.289442] optee: dynamic shared memory is enabled [ 4.293095] optee: initialized driver [ 4.299703] nvpmodel: initialized successfully [ 4.300726] tegra_hv: get_hvd: not initialized yet [ 4.305417] user_ivc_mempool: hypervisor not present [ 4.311617] usbcore: registered new interface driver snd-usb-audio [ 4.318194] u32 classifier [ 4.319608] input device check on [ 4.323144] Actions configured [ 4.326528] Initializing XFRM netlink socket [ 4.331332] NET: Registered protocol family 10 [ 4.337788] Segment Routing with IPv6 [ 4.339053] NET: Registered protocol family 17 [ 4.343022] NET: Registered protocol family 15 [ 4.348108] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.361342] Bluetooth: RFCOMM socket layer initialized [ 4.366007] Bluetooth: RFCOMM ver 1.11 [ 4.369625] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.375738] Bluetooth: HIDP socket layer initialized [ 4.381481] 9pnet: Installing 9P2000 support [ 4.385263] Key type dns_resolver registered [ 4.390278] registered taskstats version 1 [ 4.393347] Loading compiled-in X.509 certificates [ 4.407327] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.409358] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.419674] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.421532] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.429947] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.438293] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.554902] tegra194-pcie 14160000.pcie: Link up [ 4.557927] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.558204] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.558352] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.558830] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.559066] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.559602] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.560108] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.573717] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.574111] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.574603] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.576252] pci 0004:01:00.0: supports D1 D2 [ 4.576409] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.588813] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.589105] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.589446] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.589939] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.590265] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.590515] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.591104] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.596885] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.605688] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.616073] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.620194] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.625983] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.633042] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.642268] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.643706] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.651826] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.660539] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.775671] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.776406] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.776649] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.776785] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.777253] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.777443] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.777902] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.778571] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.801253] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.801711] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.804081] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.805508] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.806936] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.808796] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.809925] pci 0005:00:00.0: Removing from iommu group 7 [ 5.810236] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.848980] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.875119] host1x 13e10000.host1x: initialized [ 5.876941] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.878054] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.879572] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.880429] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.881680] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.882321] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.883598] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.884255] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.885359] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.885971] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.886987] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.892852] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.902908] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.909495] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.919752] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.926488] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.936945] falcon 15340000.vic: Adding to iommu group 17 [ 5.951817] falcon 15340000.vic: initialized [ 5.952814] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.958183] falcon 15380000.nvjpg: initialized [ 5.958887] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.970090] falcon 154c0000.nvenc: initialized [ 5.970819] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.980020] falcon 15a80000.nvenc1: initialized [ 5.980648] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.992418] nvdec 15480000.nvdec: initialized [ 5.993009] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.002737] nvdec 15140000.nvdec1: initialized [ 6.003467] tsec 15500000.tsec: Adding to iommu group 18 [ 6.010074] tsec 15500000.tsec: initialized [ 6.011067] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.017207] tsec 15100000.tsecb: initialized [ 6.021667] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.050615] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.063450] gpio-374 (wifi-enable): hogged as output/high [ 6.063803] gpio-431 (camera-control-output-low): hogged as output/low [ 6.064130] gpio-432 (camera-control-output-low): hogged as output/low [ 6.065742] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.067745] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.068318] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.069973] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.073139] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.078936] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.084549] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.092873] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.100392] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.111746] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.117148] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.122970] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.131793] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.140791] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.148530] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.155959] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.161845] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.171704] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.178031] pva 16000000.pva0: Adding to iommu group 22 [ 6.205446] pva 16000000.pva0: initialized [ 6.210438] pva 16800000.pva1: Adding to iommu group 23 [ 6.222932] pva 16800000.pva1: initialized [ 6.227456] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.240958] nvdla 15880000.nvdla0: initialized [ 6.242137] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.250619] nvdla 158c0000.nvdla1: initialized [ 6.255597] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.255828] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.256158] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.256516] tegradc 15200000.display: Adding to iommu group 26 [ 6.256658] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.257429] tegradccommon 15200000.display-hub: dma mapping done [ 6.258969] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.261900] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.263561] tegradc 15210000.display: Adding to iommu group 26 [ 6.264133] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.264243] generic_infoframe_type: 0x87 [ 6.264389] tegradc 15200000.display: DT parsed successfully [ 6.264488] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.268017] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.274333] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.279791] tegra_cec 3960000.tegra_cec: probed [ 6.281165] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.283411] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.283420] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.284387] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.292385] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.297224] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.298945] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.303797] kfuse 3830000.kfuse: initialized [ 6.314694] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.317359] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.322698] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.330293] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.340129] tegradc 15210000.display: disp0 connected to head1->sor [ 6.345618] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.351295] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.372169] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.379380] tegradc 15210000.display: DT parsed successfully [ 6.387262] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.392628] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.411662] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.457051] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.462362] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.482985] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.483382] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.485679] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.494157] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.502576] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.509276] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.516799] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.524025] usb usb1: Product: xHCI Host Controller [ 6.528702] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.534996] usb usb1: SerialNumber: 3610000.xhci [ 6.541007] hub 1-0:1.0: USB hub found [ 6.543812] hub 1-0:1.0: 4 ports detected [ 6.548501] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.553181] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.560522] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.568196] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.576413] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.583753] usb usb2: Product: xHCI Host Controller [ 6.588354] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.594546] usb usb2: SerialNumber: 3610000.xhci [ 6.600698] hub 2-0:1.0: USB hub found [ 6.603363] hub 2-0:1.0: 4 ports detected [ 6.647325] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.653512] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.655084] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.655281] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.668673] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.669727] tegra194-cpufreq ccplex: probed with BWMGR [ 6.671076] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.671490] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.671986] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.673158] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.680260] tegra194-vi5 15c10000.vi: initialized [ 6.681829] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.683179] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.683378] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.689442] generic_infoframe_type: 0x87 [ 6.697548] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.697562] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.701807] tegradc 15200000.display: DT parsed successfully [ 6.707905] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.714886] mmc0: CQHCI version 5.10 [ 6.718833] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.720464] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.720482] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.720488] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.720490] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.730747] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.746845] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.753188] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.782199] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.788227] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.800325] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.800901] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.806019] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.807327] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.810831] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.813281] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.815562] tegradc 15200000.display: probed [ 6.854241] nvethernet 2490000.ethernet: Macsec not supported [ 6.861348] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.869378] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.873806] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.881152] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.887690] mmc0: Command Queue Engine enabled [ 6.889180] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.892556] mmc0: periodic cache flush enabled [ 6.892573] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.900036] tegra-se-nvhost 15810000.se: initialized [ 6.903382] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.914127] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.914335] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.919337] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.935836] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.939173] tegra-se-nvhost 15820000.se: initialized [ 6.952057] Console: switching to colour frame buffer device 240x67 [ 6.956469] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.958050] tegradc 15200000.display: fb registered [ 6.964702] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.968895] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.982072] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.982168] tegra-se-nvhost 15830000.se: initialized [ 6.991380] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.992733] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.998852] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.004445] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.012164] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.012170] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.012174] usb 1-2: Manufacturer: Generic [ 7.014351] hub 1-2:1.0: USB hub found [ 7.019255] tegra-se-nvhost 15840000.se: initialized [ 7.026807] hub 1-2:1.0: 4 ports detected [ 7.032428] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.051763] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.055253] tegra_actmon d230000.actmon: in actmon_register()... [ 7.063753] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.068874] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.076132] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.076750] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.082161] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.089419] Extcon AUX1(HDMI) enable [ 7.089556] tegradc 15210000.display: disp1 connected to head1->sor [ 7.097175] hvc_sysfs: hypervisor is not present [ 7.104427] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.108129] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.114300] tegradc 15210000.display: DT parsed successfully [ 7.139291] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.163824] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.164065] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.164265] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.166012] random: crng init done [ 7.167524] usb 2-3: Manufacturer: Generic [ 7.178681] ALSA device list: [ 7.178816] No soundcards found. [ 7.179163] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.187804] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.199223] hub 2-3:1.0: USB hub found [ 7.201242] hub 2-3:1.0: 4 ports detected [ 7.201402] tegradc 15210000.display: probed [ 7.207207] tegradc 15210000.display: fb registered [ 7.215117] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.218964] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.220501] Freeing unused kernel memory: 3968K [ 7.226749] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.236679] tegradc 15210000.display: blank - powerdown [ 7.241542] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.249806] Extcon DP: HPD disabled [ 7.249810] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.249820] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.249826] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.249898] tegradc 15200000.display: blank - powerdown [ 7.254920] Run /init as init process [ 7.282811] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.285530] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.285536] Extcon AUX1(HDMI) disable [ 7.298852] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.298858] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.308734] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.309596] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.323199] tegradc 15200000.display: unblank [ 7.324305] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.324493] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.330378] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.332273] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.336348] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.336352] Extcon AUX1(HDMI) enable [ 7.349054] tegradc 15200000.display: sync windows ret = 247 [ 7.383904] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.389610] Extcon HDMI: HPD enabled [ 7.393290] tegradc 15200000.display: hdmi: plugged [ 7.432293] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.433954] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.434832] Root device found: mmcblk0p1 [ 7.435519] usb 1-3: Product: Bluetooth Radio [ 7.438216] usb 1-3: Manufacturer: Realtek [ 7.438983] Found dev node: /dev/mmcblk0p1 [ 7.439589] usb 1-3: SerialNumber: 00e04c000001 [ 7.475792] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.481484] Rootfs mounted over mmcblk0p1 [ 7.518874] Switching from initrd to actual rootfs [ 7.678952] systemd[1]: System time before build time, advancing clock. [ 7.749561] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.754674] systemd[1]: Detected architecture arm64. [ 7.812298] systemd[1]: Set hostname to . [ 7.974949] systemd-sysv-generator[253]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.320804] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.322573] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.328336] systemd[1]: Created slice system-modprobe.slice. [ 8.333075] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.337302] systemd[1]: Created slice User and Session Slice. [ 8.340825] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.345025] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.348379] systemd[1]: Reached target User and Group Name Lookups. [ 8.351464] systemd[1]: Reached target Slices. [ 8.354384] systemd[1]: Reached target Swap. [ 8.358258] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.363109] systemd[1]: Listening on Syslog Socket. [ 8.368104] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.371345] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.375479] systemd[1]: Listening on Journal Audit Socket. [ 8.379017] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.382703] systemd[1]: Listening on Journal Socket. [ 8.386290] systemd[1]: Listening on udev Control Socket. [ 8.389652] systemd[1]: Listening on udev Kernel Socket. [ 8.397967] systemd[1]: Mounting Huge Pages File System... [ 8.406260] systemd[1]: Mounting POSIX Message Queue File System... [ 8.414346] systemd[1]: Mounting RPC Pipe File System... [ 8.422772] systemd[1]: Mounting Kernel Debug File System... [ 8.431161] systemd[1]: Mounting Kernel Trace File System... [ 8.441501] systemd[1]: Starting Journal Service... [ 8.452459] systemd[1]: Starting Set the console keyboard layout... [ 8.463561] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.469997] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.478388] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.487815] systemd[1]: Started Nameserver information manager. [ 8.492458] systemd[1]: Reached target Network (Pre). [ 8.499750] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.501529] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.509719] systemd[1]: Starting Load Kernel Modules... [ 8.517792] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.526502] systemd[1]: Starting udev Coldplug all Devices... [ 8.536747] systemd[1]: Mounted Huge Pages File System. [ 8.540658] systemd[1]: Mounted POSIX Message Queue File System. [ 8.544403] systemd[1]: Mounted RPC Pipe File System. [ 8.546106] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.551868] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.552249] systemd[1]: Mounted Kernel Debug File System. [ 8.554025] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.556249] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.556264] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.556268] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.556715] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.557879] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.564638] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.564652] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.570171] systemd[1]: Mounted Kernel Trace File System. [ 8.577262] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.582040] systemd[1]: nvfb-udev.service: Succeeded. [ 8.587030] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.596712] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.609720] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.612779] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.620106] systemd[1]: Starting Load/Save Random Seed... [ 8.628068] systemd[1]: Starting Create System Users... [ 8.662090] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.662090] [ 8.677635] systemd[1]: Finished Load/Save Random Seed. [ 8.690891] systemd[1]: Finished Load Kernel Modules. [ 8.697782] systemd[1]: Finished Create System Users. [ 8.702108] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.708751] systemd[1]: Mounting Kernel Configuration File System... [ 8.717332] systemd[1]: Started OP-TEE Client Supplicant. [ 8.726428] systemd[1]: Starting Apply Kernel Variables... [ 8.734878] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.745432] systemd[1]: Finished Set the console keyboard layout. [ 8.749806] systemd[1]: Mounted Kernel Configuration File System. [ 10.125802] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.141379] imx219 9-0010: board setup failed [ 10.142594] imx219: probe of 9-0010 failed with error -121 [ 10.198718] hot-surface-alert cooling state: 0 -> 1 [ 10.202355] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.210959] imx219 10-0010: board setup failed [ 10.212259] imx219: probe of 10-0010 failed with error -121 [ 10.577534] using random self ethernet address [ 10.577541] using random host ethernet address [ 11.883114] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.883120] Creating 1 MTD partitions on "spi6.0": [ 11.883128] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.397157] using random self ethernet address [ 12.398692] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.809978] nvidia: loading out-of-tree module taints kernel. [ 58.576731] watchdog: watchdog0: watchdog did not stop! [ 59.063415] Trying to unregister non-registered hwtime source [ 62.121811] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.123819] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy :ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.045] I> Chip revision : A02P [0000.048] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.086] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.327] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/Tÿâclk_early initialized ÿäC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized ÿä1ÿânoc_late initialized pm_post initialized dbells initialized ÿä1 03ÿâdmce initialized cvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 aÿâavfs_clk_platform_post initialized ÿäarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.493] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.494] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.612] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.620] E> cannot find any other nvdisp nodes [0003.636] I> edid read success [0003.649] I> edid read success [0003.649] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.650] I> width = 1280, height = 768, frequency = 79500000 [0003.650] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 720, height = 480, frequency = 26973026 [0003.688] I> width = 720, height = 576, frequency = 26973026 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 4096, height = 2160, frequency = 296703296 [0003.723] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.734] I> hdmi_enable, starting HDMI initialisation [0003.739] I> hdmi_enable, HDMI initialisation complete [0003.748] initializing target [0003.749] calling apps_init() [0003.750] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000822] Console: colour dummy device 80x25 [ 0.002224] printk: console [tty0] enabled [ 0.002302] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002350] pid_max: default: 32768 minimum: 301 [ 0.002553] LSM: Security Framework initializing [ 0.002616] Yama: becoming mindful. [ 0.002683] SELinux: Initializing. [ 0.002869] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002910] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005977] rcu: Hierarchical SRCU implementation. [ 0.006252] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007115] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007168] DTB Build time: Aug 10 2022 20:31:49 [ 0.010600] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010978] Remapping and enabling EFI services. [ 0.013051] smp: Bringing up secondary CPUs ... [ 0.047904] Detected PIPT I-cache on CPU1 [ 0.047981] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.077592] Detected PIPT I-cache on CPU2 [ 0.077741] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.107331] Detected PIPT I-cache on CPU3 [ 0.107476] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.137336] Detected PIPT I-cache on CPU4 [ 0.137498] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.167217] Detected PIPT I-cache on CPU5 [ 0.167365] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.167742] smp: Brought up 1 node, 6 CPUs [ 0.167963] SMP: Total of 6 processors activated. [ 0.168029] CPU features: detected: Privileged Access Never [ 0.168057] CPU features: detected: LSE atomic instructions [ 0.168077] CPU features: detected: User Access Override [ 0.168095] CPU features: detected: 32-bit EL0 Support [ 0.168112] CPU features: detected: RAS Extension Support [ 0.168130] CPU features: detected: CRC32 instructions [ 0.168147] CPU features: detected: 32-bit EL1 Support [ 0.235396] CPU: All CPU(s) started at EL2 [ 0.241103] devtmpfs: initialized [ 0.298157] Registered cp15_barrier emulation handler [ 0.298289] Registered setend emulation handler [ 0.298314] KASLR enabled [ 0.298616] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.298653] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.299961] pinctrl core: initialized pinctrl subsystem [ 0.301006] SMBIOS 3.0.0 present. [ 0.301062] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.301735] NET: Registered protocol family 16 [ 0.303835] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.304371] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.305079] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.305157] audit: initializing netlink subsys (disabled) [ 0.305504] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.305952] thermal_sys: Registered thermal governor 'step_wise' [ 0.305959] thermal_sys: Registered thermal governor 'power_allocator' [ 0.305981] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.308151] cpuidle: using governor menu [ 0.308468] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.308990] ASID allocator initialised with 32768 entries [ 0.309220] Serial: AMBA PL011 UART driver [ 0.313870] Tegra reboot handler registered. [ 0.383139] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.383304] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.383505] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.383549] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.383673] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.383717] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.383841] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.383884] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.384003] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.384062] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.386566] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.386602] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.386631] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.386658] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.386687] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.386713] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.386751] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.386783] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.386809] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.386838] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.386894] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.386920] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.386944] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.386976] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.387000] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.387042] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.387066] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.387175] mc-err: mcerr ops are set to t19x [ 0.398872] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.398895] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.398908] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.398945] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.405398] ACPI: Interpreter disabled. [ 0.406801] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.408199] iommu: Default domain type: Translated [ 0.408263] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.408671] SCSI subsystem initialized [ 0.408834] usbcore: registered new interface driver usbfs [ 0.408871] usbcore: registered new interface driver hub [ 0.408904] usbcore: registered new device driver usb [ 0.409308] mc: Linux media interface: v0.10 [ 0.409335] videodev: Linux video capture interface: v2.00 [ 0.409609] pps_core: LinuxPPS API ver. 1 registered [ 0.409620] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.409640] PTP clock support registered [ 0.409852] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.410165] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.410216] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.410920] Registered efivars operations [ 0.416224] FPGA manager framework [ 0.416315] Advanced Linux Sound Architecture Driver Initialized. [ 0.416921] Bluetooth: Core ver 2.22 [ 0.416973] NET: Registered protocol family 31 [ 0.416985] Bluetooth: HCI device and connection manager initialized [ 0.417000] Bluetooth: HCI socket layer initialized [ 0.417015] Bluetooth: L2CAP socket layer initialized [ 0.417055] Bluetooth: SCO socket layer initialized [ 0.418647] camchar: rtcpu character device driver loaded [ 0.419475] clocksource: Switched to clocksource arch_sys_counter [ 0.701626] VFS: Disk quotas dquot_6.6.0 [ 0.701694] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.702004] pnp: PnP ACPI: disabled [ 0.713358] la/ptsa driver initialized. [ 0.713486] NET: Registered protocol family 2 [ 0.713664] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.720009] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.720097] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.720411] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.720840] TCP: Hash tables configured (established 65536 bind 65536) [ 0.720971] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.721061] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.721287] NET: Registered protocol family 1 [ 0.722213] RPC: Registered named UNIX socket transport module. [ 0.722277] RPC: Registered udp transport module. [ 0.722295] RPC: Registered tcp transport module. [ 0.722311] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.722339] PCI: CLS 0 bytes, default 64 [ 0.722603] Trying to unpack rootfs image as initramfs... [ 0.995673] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.998867] Freeing initrd memory: 8196K [ 1.003581] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.003622] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.003689] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.004037] kvm [1]: IPA Size Limit: 40 bits [ 1.004645] kvm [1]: vgic interrupt IRQ9 [ 1.005194] kvm [1]: VHE mode initialized successfully [ 1.006657] Initialise system trusted keyrings [ 1.006976] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.012743] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.013511] NFS: Registering the id_resolver key type [ 1.013544] Key type id_resolver registered [ 1.013558] Key type id_legacy registered [ 1.013639] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.013663] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.013726] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.023685] NET: Registered protocol family 38 [ 1.023709] Key type asymmetric registered [ 1.023724] Asymmetric key parser 'x509' registered [ 1.023774] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.024070] io scheduler mq-deadline registered [ 1.024090] io scheduler kyber registered [ 1.029675] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.032571] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.032647] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.032718] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.032785] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.032864] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.038378] scrncapt: init (heads:4 wins:6 planes:4) [ 1.038427] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.039535] EINJ: ACPI disabled. [ 1.042533] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.042560] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.042575] tegra-pmc: ### PMC reset level: L1 [ 1.042588] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.042692] tegra-pmc: PMC Prod config success [ 1.048539] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.053766] random: fast init done [ 1.054168] printk: console [ttyTCU0] enabled [ 2.605831] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.610364] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.614968] arm-smmu 10000000.iommu: stage 1 translation [ 2.620636] arm-smmu 10000000.iommu: stage 2 translation [ 2.625876] arm-smmu 10000000.iommu: nested translation [ 2.631477] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.638649] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.648799] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.651794] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.658076] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.666072] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.671116] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.675841] arm-smmu 12000000.iommu: stage 1 translation [ 2.681606] arm-smmu 12000000.iommu: stage 2 translation [ 2.686771] arm-smmu 12000000.iommu: nested translation [ 2.692490] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.699646] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.709618] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.712498] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.719317] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.726505] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.736665] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.739453] tegra_profiler: auth: init [ 2.743980] THERMAL EST: found 3 subdevs [ 2.747130] THERMAL EST num_resources: 0 [ 2.751268] [THERMAL EST subdev 0] [ 2.754323] [THERMAL EST subdev 1] [ 2.758015] [THERMAL EST subdev 2] [ 2.761007] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.767539] THERMAL EST: thz register success. [ 2.771703] THERMAL EST: end of probe, return err: 0 [ 2.777245] nvsciipc: loaded module [ 2.784264] tun: Universal TUN/TAP device driver, 1.6 [ 2.786552] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.792748] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.798563] e1000e: Intel(R) PRO/1000 Network Driver [ 2.803235] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.809571] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.814614] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.820839] PPP generic driver version 2.4.2 [ 2.825017] PPP BSD Compression module registered [ 2.829595] PPP Deflate Compression module registered [ 2.834837] PPP MPPE Compression module registered [ 2.840104] usbcore: registered new interface driver r8152 [ 2.845358] usbcore: registered new interface driver asix [ 2.850943] usbcore: registered new interface driver ax88179_178a [ 2.857070] usbcore: registered new interface driver cdc_ether [ 2.862761] usbcore: registered new interface driver net1080 [ 2.868392] usbcore: registered new interface driver cdc_subset [ 2.874691] usbcore: registered new interface driver zaurus [ 2.880356] usbcore: registered new interface driver cdc_ncm [ 2.886046] usbcore: registered new interface driver aqc111 [ 2.891671] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.897489] ohci-pci: OHCI PCI platform driver [ 2.902076] ohci-platform: OHCI generic platform driver [ 2.907866] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.913896] usbcore: registered new interface driver uas [ 2.918130] usbcore: registered new interface driver usb-storage [ 2.924492] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.930202] mousedev: PS/2 mouse device common for all mice [ 2.935250] usbcore: registered new interface driver xpad [ 2.943539] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.946211] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.954027] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.960602] i2c /dev entries driver [ 2.963897] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.969447] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.975071] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.980457] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.985776] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.991298] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.996667] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.010145] device-mapper: uevent: version 1.0.3 [ 3.010571] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.016827] cpuidle: Initializing cpuidle driver [ 3.020870] sdhci: Secure Digital Host Controller Interface driver [ 3.025594] sdhci: Copyright(c) Pierre Ossman [ 3.029944] Synopsys Designware Multimedia Card Interface Driver [ 3.035870] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.041816] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.042565] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.055319] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.077374] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.087301] vdd-1v0: supplied by regulator-dummy [ 3.092747] vdd-1v8-hs: supplied by regulator-dummy [ 3.097594] vdd-1v8-ls: supplied by regulator-dummy [ 3.102378] vdd-1v8-ao: supplied by regulator-dummy [ 3.106277] vddio-ddr-1v1: supplied by regulator-dummy [ 3.110761] vdd-rtc: supplied by regulator-dummy [ 3.112476] spmic-ldo1: supplied by regulator-dummy [ 3.113719] vdd-ao-3v3: supplied by regulator-dummy [ 3.119892] vddio-emmc-3v3: supplied by regulator-dummy [ 3.126153] spmic-ldo4: supplied by regulator-dummy [ 3.127388] vdd-usb-3v3: supplied by regulator-dummy [ 3.133600] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.139798] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.145407] spmic-ldo8: supplied by vdd-1v8-ls [ 3.146945] gpio-510 (gpio_default): hogged as output/high [ 3.148356] gpio-511 (gpio_default): hogged as output/high [ 3.151197] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.287987] max77686-rtc max77620-rtc: registered as rtc0 [ 3.289069] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.289413] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.123476] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.124618] hid: raw HID events driver (C) Jiri Kosina [ 4.125396] usbcore: registered new interface driver usbhid [ 4.125521] usbhid: USB HID core driver [ 4.128160] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.129558] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.193313] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.267188] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 74.682 ms) ÿá[ 4.213891] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.214533] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.215718] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.216462] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.218531] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.219110] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.219681] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.220916] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.221176] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.224283] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.229972] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.236400] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.241237] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.247204] denver_knobs_init:MTS_VERSION:55637613 [ 4.261311] t19x_cache tegra-cache: probed [ 4.264480] optee: probing for conduit method. [ 4.265395] optee: revision 3.16 (65cc2218) [ 4.266524] optee: dynamic shared memory is enabled [ 4.268635] optee: initialized driver [ 4.274962] nvpmodel: initialized successfully [ 4.276019] tegra_hv: get_hvd: not initialized yet [ 4.280777] user_ivc_mempool: hypervisor not present [ 4.286547] usbcore: registered new interface driver snd-usb-audio [ 4.293417] u32 classifier [ 4.294286] input device check on [ 4.298143] Actions configured [ 4.301975] Initializing XFRM netlink socket [ 4.306929] NET: Registered protocol family 10 [ 4.313225] Segment Routing with IPv6 [ 4.313880] NET: Registered protocol family 17 [ 4.318454] NET: Registered protocol family 15 [ 4.322655] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.336046] Bluetooth: RFCOMM socket layer initialized [ 4.340832] Bluetooth: RFCOMM ver 1.11 [ 4.344988] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.350598] Bluetooth: HIDP socket layer initialized [ 4.356538] 9pnet: Installing 9P2000 support [ 4.360077] Key type dns_resolver registered [ 4.365479] registered taskstats version 1 [ 4.368720] Loading compiled-in X.509 certificates [ 4.381713] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.384304] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.394507] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.396412] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.405204] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.413331] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.531475] tegra194-pcie 14160000.pcie: Link up [ 4.534486] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.534733] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.534916] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.535323] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.535597] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.536016] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.536530] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.549183] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.549665] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.550177] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.551749] pci 0004:01:00.0: supports D1 D2 [ 4.551960] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.563084] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.563358] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.563674] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.564190] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.564443] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.564688] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.566316] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.573728] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.581977] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.592256] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.596915] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.602361] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.609111] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.618851] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.620230] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.628397] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.637103] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.742663] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.743554] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.743826] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.743990] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.744280] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.744465] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.744858] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.745253] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.760196] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.760508] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.762100] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.763655] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.764902] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.766138] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.767045] pci 0005:00:00.0: Removing from iommu group 7 [ 5.767493] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.796025] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.816538] host1x 13e10000.host1x: initialized [ 5.818296] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.819154] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.820333] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.820994] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.821930] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.822640] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.823696] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.826134] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.836346] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.842894] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.852659] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.860099] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.869960] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.877159] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.887090] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.893923] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.904419] falcon 15340000.vic: Adding to iommu group 17 [ 5.917726] falcon 15340000.vic: initialized [ 5.918714] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.923775] falcon 15380000.nvjpg: initialized [ 5.924453] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.936648] falcon 154c0000.nvenc: initialized [ 5.937364] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.946653] falcon 15a80000.nvenc1: initialized [ 5.947517] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.958903] nvdec 15480000.nvdec: initialized [ 5.959739] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.968612] nvdec 15140000.nvdec1: initialized [ 5.969164] tsec 15500000.tsec: Adding to iommu group 18 [ 5.974262] tsec 15500000.tsec: initialized [ 5.974799] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.984713] tsec 15100000.tsecb: initialized [ 5.988579] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.012134] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.023857] gpio-374 (wifi-enable): hogged as output/high [ 6.024161] gpio-431 (camera-control-output-low): hogged as output/low [ 6.024546] gpio-432 (camera-control-output-low): hogged as output/low [ 6.026432] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.028981] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.029593] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.035330] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.040554] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.046392] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.051369] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.060104] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.067120] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.079300] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.084258] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.090058] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.098647] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.108189] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.115658] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.122896] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.128869] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.139102] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.145063] pva 16000000.pva0: Adding to iommu group 22 [ 6.171084] pva 16000000.pva0: initialized [ 6.175350] pva 16800000.pva1: Adding to iommu group 23 [ 6.186998] pva 16800000.pva1: initialized [ 6.191021] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.203735] nvdla 15880000.nvdla0: initialized [ 6.204929] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.212939] nvdla 158c0000.nvdla1: initialized [ 6.216092] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.216340] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.216629] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.216767] tegradc 15200000.display: Adding to iommu group 26 [ 6.217018] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.217038] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.218801] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.222448] tegradccommon 15200000.display-hub: dma mapping done [ 6.224652] tegradc 15210000.display: Adding to iommu group 26 [ 6.228687] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.245846] tegra_cec 3960000.tegra_cec: probed [ 6.251510] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.258647] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.263467] kfuse 3830000.kfuse: initialized [ 6.267978] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.274167] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.280758] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.287260] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.296993] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.301820] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.310984] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.316679] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.336714] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.337071] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.339710] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.347879] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.356804] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.363231] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.370921] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.378109] usb usb1: Product: xHCI Host Controller [ 6.382832] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.389114] usb usb1: SerialNumber: 3610000.xhci [ 6.394643] hub 1-0:1.0: USB hub found [ 6.398017] hub 1-0:1.0: 4 ports detected [ 6.402514] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.407098] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.414943] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.422455] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.430317] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.437517] usb usb2: Product: xHCI Host Controller [ 6.442784] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.448962] usb usb2: SerialNumber: 3610000.xhci [ 6.454157] hub 2-0:1.0: USB hub found [ 6.457295] hub 2-0:1.0: 4 ports detected [ 6.498881] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.504244] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.505478] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.505643] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.518903] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1904000 KHz, changing to: 1907200 KHz [ 6.519936] tegra194-cpufreq ccplex: probed with BWMGR [ 6.521096] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.521726] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.522231] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.523604] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.532895] mmc0: CQHCI version 5.10 [ 6.534222] tegra194-vi5 15c10000.vi: initialized [ 6.536435] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.537665] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.541129] generic_infoframe_type: 0x87 [ 6.547928] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.551201] tegradc 15200000.display: DT parsed successfully [ 6.559346] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.564866] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.571428] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.586288] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.592613] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.595392] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.603582] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.607532] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.613912] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.613917] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.613922] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.628528] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.636846] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.644684] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.657373] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.665364] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.674364] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.675835] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.675841] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.677958] tegradc 15200000.display: probed [ 6.708487] nvethernet 2490000.ethernet: Macsec not supported [ 6.715450] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.723766] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.728154] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.735087] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.735285] Console: switching to colour frame buffer device 240x67 [ 6.736280] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.741926] tegradc 15200000.display: fb registered [ 6.749620] mmc0: Command Queue Engine enabled [ 6.749785] tegra-se-nvhost 15810000.se: initialized [ 6.754130] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.754798] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.755308] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.756063] tegra-se-nvhost 15820000.se: initialized [ 6.757788] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.758247] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.758920] tegra-se-nvhost 15830000.se: initialized [ 6.759217] mmc0: periodic cache flush enabled [ 6.759233] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.759998] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.760496] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.761094] tegra-se-nvhost 15840000.se: initialized [ 6.762560] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.764109] tegra_actmon d230000.actmon: in actmon_register()... [ 6.764410] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.764624] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.768925] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.774532] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.780394] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.821792] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.826692] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.871480] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.879485] hvc_sysfs: hypervisor is not present [ 6.883993] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.883999] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.884002] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.884006] usb 1-2: Manufacturer: Generic [ 6.885987] hub 1-2:1.0: USB hub found [ 6.887097] hub 1-2:1.0: 4 ports detected [ 6.887418] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.888068] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.889038] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.916683] random: crng init done [ 6.923131] Extcon AUX1(HDMI) enable [ 6.932430] ALSA device list: [ 6.936343] tegradc 15210000.display: disp1 connected to head1->sor [ 6.940256] No soundcards found. [ 6.982870] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.990048] tegradc 15210000.display: DT parsed successfully [ 6.995937] tegradc 15210000.display: Display dc.00000000b1c4c50d registered with id=1 [ 7.003910] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 7.004390] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.009651] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 7.029114] tegradc 15210000.display: probed [ 7.029392] tegradc 15210000.display: fb registered [ 7.036221] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.040183] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.041416] Freeing unused kernel memory: 3968K [ 7.048065] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.058068] tegradc 15210000.display: blank - powerdown [ 7.063472] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.067667] Run /init as init process [ 7.071684] Extcon DP: HPD disabled [ 7.071689] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.071698] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.071703] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.098668] tegradc 15200000.display: blank - powerdown [ 7.106329] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.106335] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.106339] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.106342] usb 2-3: Manufacturer: Generic [ 7.117046] hub 2-3:1.0: USB hub found [ 7.118883] hub 2-3:1.0: 4 ports detected [ 7.138920] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.138923] Extcon AUX1(HDMI) disable [ 7.162320] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.163170] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.176435] tegradc 15200000.display: unblank [ 7.177742] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.178001] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.184344] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.186214] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.190263] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.190267] Extcon AUX1(HDMI) enable [ 7.202983] tegradc 15200000.display: sync windows ret = 247 [ 7.223466] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.235634] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.237048] Extcon HDMI: HPD enabled [ 7.239891] tegradc 15200000.display: hdmi: plugged [ 7.263472] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.286101] Root device found: mmcblk0p1 [ 7.289507] Found dev node: /dev/mmcblk0p1 [ 7.325620] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.328013] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.329464] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.330918] Rootfs mounted over mmcblk0p1 [ 7.367972] Switching from initrd to actual rootfs [ 7.388626] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.390017] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.391327] usb 1-3: Product: Bluetooth Radio [ 7.392627] usb 1-3: Manufacturer: Realtek [ 7.393890] usb 1-3: SerialNumber: 00e04c000001 [ 7.509582] systemd[1]: System time before build time, advancing clock. [ 7.580722] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.585647] systemd[1]: Detected architecture arm64. [ 7.650659] systemd[1]: Set hostname to . [ 7.814720] systemd-sysv-generator[256]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.162522] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.164269] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.169861] systemd[1]: Created slice system-modprobe.slice. [ 8.174549] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.178751] systemd[1]: Created slice User and Session Slice. [ 8.182173] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.186324] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.189714] systemd[1]: Reached target User and Group Name Lookups. [ 8.192954] systemd[1]: Reached target Slices. [ 8.196031] systemd[1]: Reached target Swap. [ 8.200037] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.203649] systemd[1]: Listening on Syslog Socket. [ 8.207149] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.210510] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.214703] systemd[1]: Listening on Journal Audit Socket. [ 8.218333] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.222102] systemd[1]: Listening on Journal Socket. [ 8.225833] systemd[1]: Listening on udev Control Socket. [ 8.229373] systemd[1]: Listening on udev Kernel Socket. [ 8.237632] systemd[1]: Mounting Huge Pages File System... [ 8.245902] systemd[1]: Mounting POSIX Message Queue File System... [ 8.253849] systemd[1]: Mounting RPC Pipe File System... [ 8.262171] systemd[1]: Mounting Kernel Debug File System... [ 8.272427] systemd[1]: Mounting Kernel Trace File System... [ 8.282304] systemd[1]: Starting Journal Service... [ 8.291260] systemd[1]: Starting Set the console keyboard layout... [ 8.299512] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.303068] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.309774] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.317741] systemd[1]: Started Nameserver information manager. [ 8.322447] systemd[1]: Reached target Network (Pre). [ 8.330764] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.331007] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.338576] systemd[1]: Starting Load Kernel Modules... [ 8.346468] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.354522] systemd[1]: Starting udev Coldplug all Devices... [ 8.366256] systemd[1]: Mounted Huge Pages File System. [ 8.370137] systemd[1]: Mounted POSIX Message Queue File System. [ 8.373893] systemd[1]: Mounted RPC Pipe File System. [ 8.377531] systemd[1]: Mounted Kernel Debug File System. [ 8.378094] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.383264] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.385593] systemd[1]: Mounted Kernel Trace File System. [ 8.385612] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.385625] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.390342] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.390347] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.390550] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.390804] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.390952] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.390962] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.409812] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.417075] systemd[1]: nvfb-udev.service: Succeeded. [ 8.421372] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.433606] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.446482] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.448815] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.456178] systemd[1]: Starting Load/Save Random Seed... [ 8.464697] systemd[1]: Starting Create System Users... [ 8.485321] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.485321] [ 8.516689] systemd[1]: Finished Load/Save Random Seed. [ 8.523977] systemd[1]: Finished Load Kernel Modules. [ 8.528845] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.536220] systemd[1]: Mounting Kernel Configuration File System... [ 8.545130] systemd[1]: Started OP-TEE Client Supplicant. [ 8.554002] systemd[1]: Starting Apply Kernel Variables... [ 8.561199] systemd[1]: Mounted Kernel Configuration File System. [ 8.567865] systemd[1]: Finished Set the console keyboard layout. [ 8.579787] systemd[1]: Finished Create System Users. [ 8.588448] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.934673] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.941106] imx219 9-0010: board setup failed [ 9.942391] imx219: probe of 9-0010 failed with error -121 [ 9.964383] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.987531] imx219 10-0010: board setup failed [ 9.988915] imx219: probe of 10-0010 failed with error -121 [ 10.107480] hot-surface-alert cooling state: 0 -> 1 [ 10.406035] using random self ethernet address [ 10.409350] using random host ethernet address [ 11.618590] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.620908] Creating 1 MTD partitions on "spi6.0": [ 11.620918] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.140214] using random self ethernet address [ 12.141882] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.873622] nvidia: loading out-of-tree module taints kernel. [ 59.013394] watchdog: watchdog0: watchdog did not stop! [ 59.504352] Trying to unregister non-registered hwtime source [ 62.562251] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.564374] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, ÿÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.643] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.644] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.645] I> width = 720, height = 480, frequency = 26973026 [0003.649] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.688] I> width = 3840, height = 2160, frequency = 296703296 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.717] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.733] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.744] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000700] Console: colour dummy device 80x25 [ 0.002138] printk: console [tty0] enabled [ 0.002199] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002233] pid_max: default: 32768 minimum: 301 [ 0.002401] LSM: Security Framework initializing [ 0.002457] Yama: becoming mindful. [ 0.002500] SELinux: Initializing. [ 0.002644] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002689] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005626] rcu: Hierarchical SRCU implementation. [ 0.005888] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006725] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006806] DTB Build time: Aug 10 2022 20:31:49 [ 0.009547] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009794] Remapping and enabling EFI services. [ 0.011764] smp: Bringing up secondary CPUs ... [ 0.041620] Detected PIPT I-cache on CPU1 [ 0.041717] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071689] Detected PIPT I-cache on CPU2 [ 0.071763] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101416] Detected PIPT I-cache on CPU3 [ 0.101559] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131298] Detected PIPT I-cache on CPU4 [ 0.131452] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161325] Detected PIPT I-cache on CPU5 [ 0.161432] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161755] smp: Brought up 1 node, 6 CPUs [ 0.161938] SMP: Total of 6 processors activated. [ 0.161991] CPU features: detected: Privileged Access Never [ 0.162012] CPU features: detected: LSE atomic instructions [ 0.162025] CPU features: detected: User Access Override [ 0.162038] CPU features: detected: 32-bit EL0 Support [ 0.162050] CPU features: detected: RAS Extension Support [ 0.162063] CPU features: detected: CRC32 instructions [ 0.162076] CPU features: detected: 32-bit EL1 Support [ 0.231236] CPU: All CPU(s) started at EL2 [ 0.238355] devtmpfs: initialized [ 0.285824] Registered cp15_barrier emulation handler [ 0.285945] Registered setend emulation handler [ 0.285967] KASLR enabled [ 0.286243] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286266] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287674] pinctrl core: initialized pinctrl subsystem [ 0.288681] SMBIOS 3.0.0 present. [ 0.288710] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289351] NET: Registered protocol family 16 [ 0.291274] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291784] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292476] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292533] audit: initializing netlink subsys (disabled) [ 0.292790] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293196] thermal_sys: Registered thermal governor 'step_wise' [ 0.293203] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293218] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295525] cpuidle: using governor menu [ 0.295880] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296327] ASID allocator initialised with 32768 entries [ 0.296566] Serial: AMBA PL011 UART driver [ 0.299923] Tegra reboot handler registered. [ 0.367919] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.368069] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.368254] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.368294] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.368402] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.368439] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.368575] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.368635] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.368758] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.368801] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.370908] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.370940] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.370967] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.370994] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.371052] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.371077] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.371100] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.371123] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.371146] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.371169] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.371192] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.371215] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.371258] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.371282] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.371306] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.371329] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.371352] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.371435] mc-err: mcerr ops are set to t19x [ 0.383957] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.383983] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.383999] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.384012] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.391162] ACPI: Interpreter disabled. [ 0.392310] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.393643] iommu: Default domain type: Translated [ 0.393708] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.394062] SCSI subsystem initialized [ 0.394229] usbcore: registered new interface driver usbfs [ 0.394270] usbcore: registered new interface driver hub [ 0.394302] usbcore: registered new device driver usb [ 0.394712] mc: Linux media interface: v0.10 [ 0.394742] videodev: Linux video capture interface: v2.00 [ 0.395052] pps_core: LinuxPPS API ver. 1 registered [ 0.395064] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.395105] PTP clock support registered [ 0.395434] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.395718] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.395802] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.396417] Registered efivars operations [ 0.402102] FPGA manager framework [ 0.402206] Advanced Linux Sound Architecture Driver Initialized. [ 0.402829] Bluetooth: Core ver 2.22 [ 0.402868] NET: Registered protocol family 31 [ 0.402880] Bluetooth: HCI device and connection manager initialized [ 0.402895] Bluetooth: HCI socket layer initialized [ 0.402911] Bluetooth: L2CAP socket layer initialized [ 0.402931] Bluetooth: SCO socket layer initialized [ 0.404680] camchar: rtcpu character device driver loaded [ 0.405497] clocksource: Switched to clocksource arch_sys_counter [ 0.723804] VFS: Disk quotas dquot_6.6.0 [ 0.723882] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.724190] pnp: PnP ACPI: disabled [ 0.736179] la/ptsa driver initialized. [ 0.736307] NET: Registered protocol family 2 [ 0.736484] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.742590] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.742658] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.742972] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.743404] TCP: Hash tables configured (established 65536 bind 65536) [ 0.743590] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.743682] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.743918] NET: Registered protocol family 1 [ 0.744539] RPC: Registered named UNIX socket transport module. [ 0.744554] RPC: Registered udp transport module. [ 0.744564] RPC: Registered tcp transport module. [ 0.744573] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.744607] PCI: CLS 0 bytes, default 64 [ 0.744805] Trying to unpack rootfs image as initramfs... [ 0.931895] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.934026] Freeing initrd memory: 8196K [ 0.937866] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.937913] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.937965] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.938361] kvm [1]: IPA Size Limit: 40 bits [ 0.938913] kvm [1]: vgic interrupt IRQ9 [ 0.939413] kvm [1]: VHE mode initialized successfully [ 0.940724] Initialise system trusted keyrings [ 0.940966] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.944547] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.945141] NFS: Registering the id_resolver key type [ 0.945170] Key type id_resolver registered [ 0.945182] Key type id_legacy registered [ 0.945237] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.945254] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.945280] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.952255] NET: Registered protocol family 38 [ 0.952276] Key type asymmetric registered [ 0.952287] Asymmetric key parser 'x509' registered [ 0.952327] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.952521] io scheduler mq-deadline registered [ 0.952535] io scheduler kyber registered [ 0.957225] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.959351] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.959408] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.959480] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.959549] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.959597] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.963479] scrncapt: init (heads:4 wins:6 planes:4) [ 0.963829] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.964502] EINJ: ACPI disabled. [ 0.966939] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.966963] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.966974] tegra-pmc: ### PMC reset level: L1 [ 0.966984] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.967072] tegra-pmc: PMC Prod config success [ 0.971974] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.976099] random: fast init done [ 0.976232] printk: console [ttyTCU0] enabled [ 2.528765] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.533492] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.538069] arm-smmu 10000000.iommu: stage 1 translation [ 2.543257] arm-smmu 10000000.iommu: stage 2 translation [ 2.548995] arm-smmu 10000000.iommu: nested translation [ 2.554081] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.561531] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.572064] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.574638] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.580939] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.589022] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.594246] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.598971] arm-smmu 12000000.iommu: stage 1 translation [ 2.604470] arm-smmu 12000000.iommu: stage 2 translation [ 2.609893] arm-smmu 12000000.iommu: nested translation [ 2.615323] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.622244] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.632707] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.635628] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.641929] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.649646] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.658950] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.662598] tegra_profiler: auth: init [ 2.666572] THERMAL EST: found 3 subdevs [ 2.670023] THERMAL EST num_resources: 0 [ 2.674145] [THERMAL EST subdev 0] [ 2.677167] [THERMAL EST subdev 1] [ 2.680858] [THERMAL EST subdev 2] [ 2.683873] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.690622] THERMAL EST: thz register success. [ 2.694547] THERMAL EST: end of probe, return err: 0 [ 2.700109] nvsciipc: loaded module [ 2.707126] tun: Universal TUN/TAP device driver, 1.6 [ 2.709446] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.715612] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.721430] e1000e: Intel(R) PRO/1000 Network Driver [ 2.726389] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.732195] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.737731] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.743895] PPP generic driver version 2.4.2 [ 2.748217] PPP BSD Compression module registered [ 2.752457] PPP Deflate Compression module registered [ 2.757963] PPP MPPE Compression module registered [ 2.762990] usbcore: registered new interface driver r8152 [ 2.768218] usbcore: registered new interface driver asix [ 2.773813] usbcore: registered new interface driver ax88179_178a [ 2.779675] usbcore: registered new interface driver cdc_ether [ 2.785960] usbcore: registered new interface driver net1080 [ 2.791237] usbcore: registered new interface driver cdc_subset [ 2.797585] usbcore: registered new interface driver zaurus [ 2.803223] usbcore: registered new interface driver cdc_ncm [ 2.808636] usbcore: registered new interface driver aqc111 [ 2.814521] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.820363] ohci-pci: OHCI PCI platform driver [ 2.824917] ohci-platform: OHCI generic platform driver [ 2.830796] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.836826] usbcore: registered new interface driver uas [ 2.841218] usbcore: registered new interface driver usb-storage [ 2.847070] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.853164] mousedev: PS/2 mouse device common for all mice [ 2.858356] usbcore: registered new interface driver xpad [ 2.866052] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.868849] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.876638] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.883239] i2c /dev entries driver [ 2.886771] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.892404] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.898118] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.903050] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.908524] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.914020] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.919607] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.930662] device-mapper: uevent: version 1.0.3 [ 2.931022] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.939436] cpuidle: Initializing cpuidle driver [ 2.943717] sdhci: Secure Digital Host Controller Interface driver [ 2.948710] sdhci: Copyright(c) Pierre Ossman [ 2.952548] Synopsys Designware Multimedia Card Interface Driver [ 2.958946] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.964988] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.965520] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.977865] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.995843] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.004712] vdd-1v0: supplied by regulator-dummy [ 3.009994] vdd-1v8-hs: supplied by regulator-dummy [ 3.014636] vdd-1v8-ls: supplied by regulator-dummy [ 3.019249] vdd-1v8-ao: supplied by regulator-dummy [ 3.022935] vddio-ddr-1v1: supplied by regulator-dummy [ 3.027195] vdd-rtc: supplied by regulator-dummy [ 3.028695] spmic-ldo1: supplied by regulator-dummy [ 3.029789] vdd-ao-3v3: supplied by regulator-dummy [ 3.035930] vddio-emmc-3v3: supplied by regulator-dummy [ 3.041996] spmic-ldo4: supplied by regulator-dummy [ 3.043093] vdd-usb-3v3: supplied by regulator-dummy [ 3.049442] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.055464] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.060803] spmic-ldo8: supplied by vdd-1v8-ls [ 3.062095] gpio-510 (gpio_default): hogged as output/high [ 3.064943] gpio-511 (gpio_default): hogged as output/high [ 3.071804] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.210485] max77686-rtc max77620-rtc: registered as rtc0 [ 3.211732] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.212011] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.899549] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.900358] hid: raw HID events driver (C) Jiri Kosina [ 3.900989] usbcore: registered new interface driver usbhid [ 3.901134] usbhid: USB HID core driver [ 3.902693] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.903772] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.828174] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.904250] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.887 ms) ÿá[ 3.989449] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.990106] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.991119] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.991867] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.993727] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.994473] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.995021] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.996367] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.996707] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.998711] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.006275] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.012222] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.017746] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.024179] denver_knobs_init:MTS_VERSION:55637613 [ 4.037674] t19x_cache tegra-cache: probed [ 4.040060] optee: probing for conduit method. [ 4.040848] optee: revision 3.16 (65cc2218) [ 4.041873] optee: dynamic shared memory is enabled [ 4.044430] optee: initialized driver [ 4.050831] nvpmodel: initialized successfully [ 4.052140] tegra_hv: get_hvd: not initialized yet [ 4.056992] user_ivc_mempool: hypervisor not present [ 4.063057] usbcore: registered new interface driver snd-usb-audio [ 4.069294] u32 classifier [ 4.070912] input device check on [ 4.074192] Actions configured [ 4.078000] Initializing XFRM netlink socket [ 4.082907] NET: Registered protocol family 10 [ 4.089288] Segment Routing with IPv6 [ 4.090102] NET: Registered protocol family 17 [ 4.094574] NET: Registered protocol family 15 [ 4.098786] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.112718] Bluetooth: RFCOMM socket layer initialized [ 4.117394] Bluetooth: RFCOMM ver 1.11 [ 4.120977] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.127111] Bluetooth: HIDP socket layer initialized [ 4.132596] 9pnet: Installing 9P2000 support [ 4.136251] Key type dns_resolver registered [ 4.141660] registered taskstats version 1 [ 4.144820] Loading compiled-in X.509 certificates [ 4.156217] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.160515] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.170441] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.172504] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.181354] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.189575] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.305532] tegra194-pcie 14160000.pcie: Link up [ 4.308322] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.308513] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.308645] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.308840] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.309009] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.309329] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.309764] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.319899] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.320411] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.320784] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.322302] pci 0004:01:00.0: supports D1 D2 [ 4.322456] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.330635] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.331019] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.331254] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.331585] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.331807] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.334037] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.340099] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.347522] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.356256] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.366446] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.370924] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.376381] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.382955] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.391671] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.393963] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.402677] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.410882] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.513708] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.514312] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.514569] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.514740] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.514966] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.515140] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.515441] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.515863] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.532060] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.532397] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.534138] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.535179] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.536640] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.538384] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.539154] pci 0005:00:00.0: Removing from iommu group 7 [ 5.539441] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.569135] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.589856] host1x 13e10000.host1x: initialized [ 5.591326] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.592181] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.593162] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.593919] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.594820] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.595394] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.596341] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.596868] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.607143] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.613939] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.623989] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.630546] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.640827] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.647917] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.657672] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.664768] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.674481] falcon 15340000.vic: Adding to iommu group 17 [ 5.689586] falcon 15340000.vic: initialized [ 5.690557] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.695915] falcon 15380000.nvjpg: initialized [ 5.696539] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.706785] falcon 154c0000.nvenc: initialized [ 5.707336] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.716969] falcon 15a80000.nvenc1: initialized [ 5.717605] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.729384] nvdec 15480000.nvdec: initialized [ 5.730091] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.740125] nvdec 15140000.nvdec1: initialized [ 5.740638] tsec 15500000.tsec: Adding to iommu group 18 [ 5.746165] tsec 15500000.tsec: initialized [ 5.746583] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.754396] tsec 15100000.tsecb: initialized [ 5.757784] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.781940] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.793062] gpio-374 (wifi-enable): hogged as output/high [ 5.793337] gpio-431 (camera-control-output-low): hogged as output/low [ 5.793713] gpio-432 (camera-control-output-low): hogged as output/low [ 5.795282] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.797038] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.799044] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.805879] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.811475] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.816806] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.822601] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.830810] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.838331] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.849619] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.854987] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.860933] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.869601] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.878940] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.885791] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.893781] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.900196] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.909920] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.915834] pva 16000000.pva0: Adding to iommu group 22 [ 5.943398] pva 16000000.pva0: initialized [ 5.948447] pva 16800000.pva1: Adding to iommu group 23 [ 5.959107] pva 16800000.pva1: initialized [ 5.963975] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.983174] nvdla 15880000.nvdla0: initialized [ 5.984364] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.993071] nvdla 158c0000.nvdla1: initialized [ 5.995215] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.995490] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.996109] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.996456] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.996830] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.996886] tegradc 15200000.display: Adding to iommu group 26 [ 5.997030] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 5.997243] tegradccommon 15200000.display-hub: dma mapping done [ 5.997293] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 5.997302] tegra_cec 3960000.tegra_cec: probed [ 6.006187] tegradc 15210000.display: Adding to iommu group 26 [ 6.022492] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.023281] tegradc 15210000.display: disp0 connected to head1->sor [ 6.029388] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.034144] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.040724] kfuse 3830000.kfuse: initialized [ 6.047955] tegradc 15210000.display: DT parsed successfully [ 6.052690] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.057736] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.064358] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.078751] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.085197] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.094936] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.100064] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.109390] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.114606] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.133609] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.133961] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.137837] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.146198] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.154716] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.161464] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.169083] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.175986] usb usb1: Product: xHCI Host Controller [ 6.180970] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.187269] usb usb1: SerialNumber: 3610000.xhci [ 6.192740] hub 1-0:1.0: USB hub found [ 6.195896] hub 1-0:1.0: 4 ports detected [ 6.200695] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.205347] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.213133] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.220875] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.228745] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.235929] usb usb2: Product: xHCI Host Controller [ 6.240635] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.246877] usb usb2: SerialNumber: 3610000.xhci [ 6.252701] hub 2-0:1.0: USB hub found [ 6.255620] hub 2-0:1.0: 4 ports detected [ 6.296483] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.302062] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.303274] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.303475] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.316280] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.317300] tegra194-cpufreq ccplex: probed with BWMGR [ 6.318470] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.319168] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.319606] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.320856] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.331051] mmc0: CQHCI version 5.10 [ 6.332358] tegra194-vi5 15c10000.vi: initialized [ 6.334444] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.335862] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.339535] generic_infoframe_type: 0x87 [ 6.345691] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.349634] tegradc 15200000.display: DT parsed successfully [ 6.357726] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.363302] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.369781] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.369786] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.369814] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.398072] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.399293] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.403763] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.412030] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.412034] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.412178] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.412370] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.412376] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.412791] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.414038] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.414043] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.415992] tegradc 15200000.display: probed [ 6.418632] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.457570] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.467272] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.506441] nvethernet 2490000.ethernet: Macsec not supported [ 6.506772] Console: switching to colour frame buffer device 240x67 [ 6.507875] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.512155] tegradc 15200000.display: fb registered [ 6.514134] mmc0: Command Queue Engine enabled [ 6.514139] mmc0: periodic cache flush enabled [ 6.514156] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.514652] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.514821] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.518631] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.519709] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.519819] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.519943] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.520955] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.522649] tegra-se-nvhost 15810000.se: initialized [ 6.526724] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.527689] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.527956] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.528663] tegra-se-nvhost 15820000.se: initialized [ 6.530550] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.530714] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.531360] tegra-se-nvhost 15830000.se: initialized [ 6.532506] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.536974] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.540959] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.547404] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.552164] tegra-se-nvhost 15840000.se: initialized [ 6.621521] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.628536] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.634033] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.639466] tegra_actmon d230000.actmon: in actmon_register()... [ 6.644176] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.644799] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.649133] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.649139] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.649143] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.649146] usb 1-2: Manufacturer: Generic [ 6.650330] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.651061] hub 1-2:1.0: USB hub found [ 6.652357] hub 1-2:1.0: 4 ports detected [ 6.656334] Extcon AUX1(HDMI) enable [ 6.656463] tegradc 15210000.display: disp1 connected to head1->sor [ 6.662631] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.667343] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.676931] hvc_sysfs: hypervisor is not present [ 6.682397] tegradc 15210000.display: DT parsed successfully [ 6.716228] ALSA device list: [ 6.719115] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.726509] No soundcards found. [ 6.774485] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.778602] tegradc 15210000.display: vblank syncpt # 15 for dc 1 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.812515] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.812608] tegradc 15200000.display: blank - powerdown [ 6.819268] tegradc 15210000.display: probed [ 6.823101] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.823107] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.823111] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.823115] usb 2-3: Manufacturer: Generic [ 6.833659] hub 2-3:1.0: USB hub found [ 6.835436] hub 2-3:1.0: 4 ports detected [ 6.855239] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.855243] Extcon AUX1(HDMI) disable [ 6.878757] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.879617] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.892817] tegradc 15200000.display: unblank [ 6.894169] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.894369] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.900594] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.902443] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.906515] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.906519] Extcon AUX1(HDMI) enable [ 6.919211] tegradc 15200000.display: sync windows ret = 247 [ 6.941555] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 6.956229] tegradc 15210000.display: fb registered [ 6.959669] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.960921] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 6.965111] Freeing unused kernel memory: 3968K [ 6.968092] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.975581] Extcon HDMI: HPD enabled [ 6.975592] tegradc 15200000.display: hdmi: plugged [ 6.980315] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.002130] tegradc 15210000.display: blank - powerdown [ 7.007019] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.009563] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.009763] Run /init as init process [ 7.015483] Extcon DP: HPD disabled [ 7.015487] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.015517] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.041395] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.074436] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.075890] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.099616] Root device found: mmcblk0p1 [ 7.103106] Found dev node: /dev/mmcblk0p1 [ 7.106819] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.108314] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.109771] usb 1-3: Product: Bluetooth Radio [ 7.111160] usb 1-3: Manufacturer: Realtek [ 7.112505] usb 1-3: SerialNumber: 00e04c000001 [ 7.142343] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.147955] Rootfs mounted over mmcblk0p1 [ 7.185831] Switching from initrd to actual rootfs [ 7.347217] systemd[1]: System time before build time, advancing clock. [ 7.421212] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.426283] systemd[1]: Detected architecture arm64. [ 7.471815] systemd[1]: Set hostname to . [ 7.624367] random: crng init done [ 7.644870] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.003649] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.005389] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.011121] systemd[1]: Created slice system-modprobe.slice. [ 8.015837] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.020113] systemd[1]: Created slice User and Session Slice. [ 8.023651] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.027863] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.031251] systemd[1]: Reached target User and Group Name Lookups. [ 8.034655] systemd[1]: Reached target Slices. [ 8.037833] systemd[1]: Reached target Swap. [ 8.041923] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.045666] systemd[1]: Listening on Syslog Socket. [ 8.049324] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.052844] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.057169] systemd[1]: Listening on Journal Audit Socket. [ 8.060934] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.064982] systemd[1]: Listening on Journal Socket. [ 8.069714] systemd[1]: Listening on udev Control Socket. [ 8.075074] systemd[1]: Listening on udev Kernel Socket. [ 8.083555] systemd[1]: Mounting Huge Pages File System... [ 8.092004] systemd[1]: Mounting POSIX Message Queue File System... [ 8.099771] systemd[1]: Mounting RPC Pipe File System... [ 8.108245] systemd[1]: Mounting Kernel Debug File System... [ 8.116990] systemd[1]: Mounting Kernel Trace File System... [ 8.127230] systemd[1]: Starting Journal Service... [ 8.136092] systemd[1]: Starting Set the console keyboard layout... [ 8.144364] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.147887] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.154257] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.162707] systemd[1]: Started Nameserver information manager. [ 8.167826] systemd[1]: Reached target Network (Pre). [ 8.175709] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.177700] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.185442] systemd[1]: Starting Load Kernel Modules... [ 8.193034] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.201962] systemd[1]: Starting udev Coldplug all Devices... [ 8.211919] systemd[1]: Mounted Huge Pages File System. [ 8.215598] systemd[1]: Mounted POSIX Message Queue File System. [ 8.219112] systemd[1]: Mounted RPC Pipe File System. [ 8.224045] systemd[1]: Mounted Kernel Debug File System. [ 8.224512] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.227357] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.227362] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.227372] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.227376] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.227983] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.228177] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.228335] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.228632] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.239761] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.242852] systemd[1]: Mounted Kernel Trace File System. [ 8.251450] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.257470] systemd[1]: nvfb-udev.service: Succeeded. [ 8.262445] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.275676] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.280731] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.282692] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.296879] systemd[1]: Starting Load/Save Random Seed... [ 8.305126] systemd[1]: Starting Create System Users... [ 8.344767] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.344767] [ 8.357430] systemd[1]: Finished Load/Save Random Seed. [ 8.368768] systemd[1]: Finished Create System Users. [ 8.376012] systemd[1]: Finished Load Kernel Modules. [ 8.380777] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.388562] systemd[1]: Mounting Kernel Configuration File System... [ 8.396811] systemd[1]: Started OP-TEE Client Supplicant. [ 8.405126] systemd[1]: Starting Apply Kernel Variables... [ 8.413557] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.423901] systemd[1]: Finished Set the console keyboard layout. [ 8.430806] systemd[1]: Mounted Kernel Configuration File System. [ 9.768510] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.775346] imx219 9-0010: board setup failed [ 9.776740] imx219: probe of 9-0010 failed with error -121 [ 9.800916] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.808235] imx219 10-0010: board setup failed [ 9.809619] imx219: probe of 10-0010 failed with error -121 [ 9.901566] hot-surface-alert cooling state: 0 -> 1 [ 10.407440] using random self ethernet address [ 10.438071] using random host ethernet address [ 11.419837] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.419844] Creating 1 MTD partitions on "spi6.0": [ 11.419855] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.123230] using random self ethernet address [ 12.124318] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.816622] nvidia: loading out-of-tree module taints kernel. [ 59.651594] watchdog: watchdog0: watchdog did not stop! [ 60.146775] Trying to unregister non-registered hwtime source [ 63.208186] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.209810] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] tÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 67500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.345] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized pm_post initialized dbells initialized ÿä3:2ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:20 UTC 2022ÿâavfs_clk_mach_post initialized ÿä aarcÿâavfs_clk_platform_post initialized ÿäh6ÿâcvc_late initialized regulator_post initialized ÿä4 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuration mÿâpg_post initialized profile initialized fuse_late initialized extras_post initentering main console loop ] ialized bpmp: init complete ÿäight be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.210] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.211] I> CPU-BL Params @ 0xca020000 [0003.211] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.212] I> 2) Base:0xc9800000 Size:0x00200000 [0003.212] I> 3) Base:0xc8600000 Size:0x00200000 [0003.215] I> 4) Base:0xc8200000 Size:0x00100000 [0003.219] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.228] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.237] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.246] I> 11) Base:0x40000000 Size:0x00040000 [0003.250] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.255] I> 13) Base:0x40046000 Size:0x00002000 [0003.259] I> 14) Base:0x40048000 Size:0x00002000 [0003.264] I> 15) Base:0xaf000000 Size:0x00004000 [0003.268] I> 16) Base:0x4004a000 Size:0x00002000 [0003.273] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.277] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.286] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.295] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.304] I> 24) Base:0xcc000000 Size:0x02000000 [0003.308] I> 25) Base:0x40050000 Size:0x00002000 [0003.313] I> 26) Base:0x40040000 Size:0x00006000 [0003.317] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.322] I> 28) Base:0xc8400000 Size:0x00200000 [0003.326] I> 29) Base:0xc8800000 Size:0x00400000 [0003.331] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.335] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.344] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.353] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.362] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.371] I> 39) Base:0xb0000000 Size:0x08000000 [0003.375] I> 40) Base:0x00000000 Size:0x00000000 [0003.380] I> 41) Base:0x00000000 Size:0x00000000 [0003.384] I> 42) Base:0x00000000 Size:0x00000000 [0003.389] I> 43) Base:0x00000000 Size:0x00000000 [0003.393] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.402] GIC-SPI Target CPU: 0 [0003.405] Interrupts Init done [0003.408] calling constructors [0003.411] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.418] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.428] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.435] initializing platform [0003.438] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.447] I> Bl_dtb @0xadf00000 [0003.450] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.473] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.499] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.517] I> QSPI source rate = 204000 Khz [0003.520] I> Requested rate for QSPI clock = 34000 Khz [0003.525] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.530] I> tx_clk_tap_delay : 0 [0003.533] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.544] I> Qspi initialized successfully [0003.544] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.557] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.576] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.606] I> regulator 'vdd-hdmi-5v0' already enabled [0003.606] I> hdmi cable connected [0003.612] W> set volts not configured for 'vdd-1v0' [0003.616] W> set volts not configured for 'vdd-1v8-hs' [0003.617] I> retrieved tmds range from prod_list_hdmi_soc [0003.623] E> invalid display type [0003.624] E> cannot find any other nvdisp nodes [0003.640] I> edid read success [0003.653] I> edid read success [0003.653] I> width = 640, height = 480, frequency = 25174825 [0003.653] I> width = 1920, height = 1080, frequency = 148500000 [0003.654] I> width = 1280, height = 768, frequency = 79500000 [0003.654] I> width = 1360, height = 768, frequency = 85500000 [0003.654] I> width = 720, height = 480, frequency = 26973026 [0003.658] I> width = 720, height = 576, frequency = 26973026 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1280, height = 720, frequency = 74175824 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.681] I> width = 1920, height = 1080, frequency = 148351648 [0003.687] I> width = 720, height = 480, frequency = 26973026 [0003.692] I> width = 720, height = 576, frequency = 26973026 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 3840, height = 2160, frequency = 296703296 [0003.721] I> width = 4096, height = 2160, frequency = 296703296 [0003.727] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.738] I> hdmi_enable, starting HDMI initialisation [0003.743] I> hdmi_enable, HDMI initialisation complete [0003.752] initializing target [0003.752] calling apps_init() [0003.753] starting app kernel_boot_app [0003.754] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000801] Console: colour dummy device 80x25 [ 0.002354] printk: console [tty0] enabled [ 0.002418] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002475] pid_max: default: 32768 minimum: 301 [ 0.002682] LSM: Security Framework initializing [ 0.002740] Yama: becoming mindful. [ 0.002782] SELinux: Initializing. [ 0.002973] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003010] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005883] rcu: Hierarchical SRCU implementation. [ 0.006113] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006918] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006981] DTB Build time: Aug 10 2022 20:31:49 [ 0.010320] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010673] Remapping and enabling EFI services. [ 0.012630] smp: Bringing up secondary CPUs ... [ 0.042204] Detected PIPT I-cache on CPU1 [ 0.042284] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072206] Detected PIPT I-cache on CPU2 [ 0.072284] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101789] Detected PIPT I-cache on CPU3 [ 0.101877] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131631] Detected PIPT I-cache on CPU4 [ 0.131715] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161367] Detected PIPT I-cache on CPU5 [ 0.161437] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161778] smp: Brought up 1 node, 6 CPUs [ 0.162131] SMP: Total of 6 processors activated. [ 0.162155] CPU features: detected: Privileged Access Never [ 0.162177] CPU features: detected: LSE atomic instructions [ 0.162199] CPU features: detected: User Access Override [ 0.162221] CPU features: detected: 32-bit EL0 Support [ 0.162243] CPU features: detected: RAS Extension Support [ 0.162264] CPU features: detected: CRC32 instructions [ 0.162286] CPU features: detected: 32-bit EL1 Support [ 0.228185] CPU: All CPU(s) started at EL2 [ 0.234521] devtmpfs: initialized [ 0.284742] Registered cp15_barrier emulation handler [ 0.284840] Registered setend emulation handler [ 0.284864] KASLR enabled [ 0.285218] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285260] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286609] pinctrl core: initialized pinctrl subsystem [ 0.287788] SMBIOS 3.0.0 present. [ 0.287825] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288519] NET: Registered protocol family 16 [ 0.290519] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291061] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291786] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291859] audit: initializing netlink subsys (disabled) [ 0.292147] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292609] thermal_sys: Registered thermal governor 'step_wise' [ 0.292616] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292648] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294976] cpuidle: using governor menu [ 0.295409] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295877] ASID allocator initialised with 32768 entries [ 0.296116] Serial: AMBA PL011 UART driver [ 0.299740] Tegra reboot handler registered. [ 0.371288] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.371507] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.371736] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.371811] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.371948] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.372042] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.372215] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.372265] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372400] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372450] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.375199] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.375243] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.375308] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.375345] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.375400] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375436] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.375517] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375557] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375594] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375627] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.375660] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.375693] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.375725] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.375760] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.375795] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.375831] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.375865] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.376012] mc-err: mcerr ops are set to t19x [ 0.389215] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.389252] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.389266] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.389278] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.396340] ACPI: Interpreter disabled. [ 0.397584] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.399075] iommu: Default domain type: Translated [ 0.399145] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.399538] SCSI subsystem initialized [ 0.399815] usbcore: registered new interface driver usbfs [ 0.399860] usbcore: registered new interface driver hub [ 0.399895] usbcore: registered new device driver usb [ 0.400360] mc: Linux media interface: v0.10 [ 0.400391] videodev: Linux video capture interface: v2.00 [ 0.400780] pps_core: LinuxPPS API ver. 1 registered [ 0.400794] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.400817] PTP clock support registered [ 0.401050] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.401386] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401475] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.402233] Registered efivars operations [ 0.408010] FPGA manager framework [ 0.408119] Advanced Linux Sound Architecture Driver Initialized. [ 0.408734] Bluetooth: Core ver 2.22 [ 0.408774] NET: Registered protocol family 31 [ 0.408787] Bluetooth: HCI device and connection manager initialized [ 0.408802] Bluetooth: HCI socket layer initialized [ 0.408818] Bluetooth: L2CAP socket layer initialized [ 0.408841] Bluetooth: SCO socket layer initialized [ 0.410444] camchar: rtcpu character device driver loaded [ 0.411107] clocksource: Switched to clocksource arch_sys_counter [ 0.722305] VFS: Disk quotas dquot_6.6.0 [ 0.722378] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.722714] pnp: PnP ACPI: disabled [ 0.735271] la/ptsa driver initialized. [ 0.735384] NET: Registered protocol family 2 [ 0.735603] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.741731] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.741849] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.742113] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.742548] TCP: Hash tables configured (established 65536 bind 65536) [ 0.742669] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.742774] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.742992] NET: Registered protocol family 1 [ 0.743969] RPC: Registered named UNIX socket transport module. [ 0.744001] RPC: Registered udp transport module. [ 0.744015] RPC: Registered tcp transport module. [ 0.744029] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.744078] PCI: CLS 0 bytes, default 64 [ 0.744371] Trying to unpack rootfs image as initramfs... [ 0.940405] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.942717] Freeing initrd memory: 8196K [ 0.946713] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.946754] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.946809] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.947274] kvm [1]: IPA Size Limit: 40 bits [ 0.947759] kvm [1]: vgic interrupt IRQ9 [ 0.948314] kvm [1]: VHE mode initialized successfully [ 0.949555] Initialise system trusted keyrings [ 0.949854] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.954350] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.955020] NFS: Registering the id_resolver key type [ 0.955047] Key type id_resolver registered [ 0.955059] Key type id_legacy registered [ 0.955177] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.955196] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.955224] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.962058] NET: Registered protocol family 38 [ 0.962079] Key type asymmetric registered [ 0.962090] Asymmetric key parser 'x509' registered [ 0.962131] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.962298] io scheduler mq-deadline registered [ 0.962311] io scheduler kyber registered [ 0.966446] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.968599] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.968669] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.968745] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.968798] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.968850] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.972945] scrncapt: init (heads:4 wins:6 planes:4) [ 0.973086] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.973890] EINJ: ACPI disabled. [ 0.976483] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.976506] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.976517] tegra-pmc: ### PMC reset level: L1 [ 0.976526] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.976592] tegra-pmc: PMC Prod config success [ 0.980477] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.984703] random: fast init done [ 0.984857] printk: console [ttyTCU0] enabled [ 2.537761] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.541822] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.546383] arm-smmu 10000000.iommu: stage 1 translation [ 2.552208] arm-smmu 10000000.iommu: stage 2 translation [ 2.557389] arm-smmu 10000000.iommu: nested translation [ 2.562747] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.570167] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.579752] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.583265] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.589835] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.597369] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.602608] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.607602] arm-smmu 12000000.iommu: stage 1 translation [ 2.613119] arm-smmu 12000000.iommu: stage 2 translation [ 2.618519] arm-smmu 12000000.iommu: nested translation [ 2.623712] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.630865] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.640375] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.644000] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.650807] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.658094] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.667890] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.670973] tegra_profiler: auth: init [ 2.675425] THERMAL EST: found 3 subdevs [ 2.678883] THERMAL EST num_resources: 0 [ 2.682749] [THERMAL EST subdev 0] [ 2.685812] [THERMAL EST subdev 1] [ 2.689480] [THERMAL EST subdev 2] [ 2.692466] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.699126] THERMAL EST: thz register success. [ 2.703418] THERMAL EST: end of probe, return err: 0 [ 2.708635] nvsciipc: loaded module [ 2.714870] tun: Universal TUN/TAP device driver, 1.6 [ 2.717839] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.724496] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.730031] e1000e: Intel(R) PRO/1000 Network Driver [ 2.734987] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.741047] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.746354] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.752444] PPP generic driver version 2.4.2 [ 2.756761] PPP BSD Compression module registered [ 2.761356] PPP Deflate Compression module registered [ 2.766580] PPP MPPE Compression module registered [ 2.771336] usbcore: registered new interface driver r8152 [ 2.777091] usbcore: registered new interface driver asix [ 2.782424] usbcore: registered new interface driver ax88179_178a [ 2.788291] usbcore: registered new interface driver cdc_ether [ 2.794512] usbcore: registered new interface driver net1080 [ 2.800103] usbcore: registered new interface driver cdc_subset [ 2.806157] usbcore: registered new interface driver zaurus [ 2.811839] usbcore: registered new interface driver cdc_ncm [ 2.817522] usbcore: registered new interface driver aqc111 [ 2.823214] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.828981] ohci-pci: OHCI PCI platform driver [ 2.833283] ohci-platform: OHCI generic platform driver [ 2.838956] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.845188] usbcore: registered new interface driver uas [ 2.849589] usbcore: registered new interface driver usb-storage [ 2.855975] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.861811] mousedev: PS/2 mouse device common for all mice [ 2.866983] usbcore: registered new interface driver xpad [ 2.874736] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.877488] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.885253] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.891770] i2c /dev entries driver [ 2.895409] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.900813] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.906460] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.911599] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.917165] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.922414] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.928136] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.940137] device-mapper: uevent: version 1.0.3 [ 2.940598] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.948013] cpuidle: Initializing cpuidle driver [ 2.952340] sdhci: Secure Digital Host Controller Interface driver [ 2.957096] sdhci: Copyright(c) Pierre Ossman [ 2.961179] Synopsys Designware Multimedia Card Interface Driver [ 2.967584] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.973561] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.974105] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.986645] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.005261] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.013924] vdd-1v0: supplied by regulator-dummy [ 3.019283] vdd-1v8-hs: supplied by regulator-dummy [ 3.023908] vdd-1v8-ls: supplied by regulator-dummy [ 3.028549] vdd-1v8-ao: supplied by regulator-dummy [ 3.032308] vddio-ddr-1v1: supplied by regulator-dummy [ 3.036699] vdd-rtc: supplied by regulator-dummy [ 3.038316] spmic-ldo1: supplied by regulator-dummy [ 3.039441] vdd-ao-3v3: supplied by regulator-dummy [ 3.045440] vddio-emmc-3v3: supplied by regulator-dummy [ 3.051646] spmic-ldo4: supplied by regulator-dummy [ 3.052739] vdd-usb-3v3: supplied by regulator-dummy [ 3.058763] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.064816] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.070172] spmic-ldo8: supplied by vdd-1v8-ls [ 3.071579] gpio-510 (gpio_default): hogged as output/high [ 3.073302] gpio-511 (gpio_default): hogged as output/high [ 3.080216] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.218587] max77686-rtc max77620-rtc: registered as rtc0 [ 3.219582] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.219892] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.928942] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.929981] hid: raw HID events driver (C) Jiri Kosina [ 3.930633] usbcore: registered new interface driver usbhid [ 3.930790] usbhid: USB HID core driver [ 3.932570] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.933652] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.945680] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.021103] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 76.231 ms) ÿá[ 4.018718] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.019492] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.020430] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.021031] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.022501] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.023205] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.023752] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.024969] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.025288] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.026903] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.034902] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.041419] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.046693] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.053095] denver_knobs_init:MTS_VERSION:55637613 [ 4.065370] t19x_cache tegra-cache: probed [ 4.067889] optee: probing for conduit method. [ 4.068707] optee: revision 3.16 (65cc2218) [ 4.069676] optee: dynamic shared memory is enabled [ 4.073695] optee: initialized driver [ 4.081116] nvpmodel: initialized successfully [ 4.081872] tegra_hv: get_hvd: not initialized yet [ 4.086054] user_ivc_mempool: hypervisor not present [ 4.092004] usbcore: registered new interface driver snd-usb-audio [ 4.098870] u32 classifier [ 4.099915] input device check on [ 4.103480] Actions configured [ 4.107362] Initializing XFRM netlink socket [ 4.112298] NET: Registered protocol family 10 [ 4.118014] Segment Routing with IPv6 [ 4.119699] NET: Registered protocol family 17 [ 4.123717] NET: Registered protocol family 15 [ 4.128301] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.141987] Bluetooth: RFCOMM socket layer initialized [ 4.146458] Bluetooth: RFCOMM ver 1.11 [ 4.150194] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.156446] Bluetooth: HIDP socket layer initialized [ 4.161896] 9pnet: Installing 9P2000 support [ 4.165553] Key type dns_resolver registered [ 4.171475] registered taskstats version 1 [ 4.174171] Loading compiled-in X.509 certificates [ 4.185438] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.189870] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.199606] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.201890] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.210708] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.218877] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.335165] tegra194-pcie 14160000.pcie: Link up [ 4.338166] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.338416] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.338586] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.338818] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.339016] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.339438] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.339861] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.349073] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.349645] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.350147] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.351762] pci 0004:01:00.0: supports D1 D2 [ 4.351973] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.360970] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.361364] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.361607] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.361978] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.362227] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.364025] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.369781] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.377435] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.385830] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.395977] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.400859] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.406161] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.412964] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.421512] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.423698] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.432370] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.440663] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.547251] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.547829] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.548028] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.548201] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.548466] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.548707] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.549140] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.549544] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.564328] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.564688] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.566254] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.567488] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.568681] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.570047] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.570862] pci 0005:00:00.0: Removing from iommu group 7 [ 5.571215] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.601479] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.622107] host1x 13e10000.host1x: initialized [ 5.623940] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.624737] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.625823] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.626391] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.627549] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.628189] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.629188] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.630796] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.640640] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.647034] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.657419] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.664498] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.674249] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.681362] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.691014] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.698082] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.707889] falcon 15340000.vic: Adding to iommu group 17 [ 5.721435] falcon 15340000.vic: initialized [ 5.722354] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.728893] falcon 15380000.nvjpg: initialized [ 5.729457] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.741367] falcon 154c0000.nvenc: initialized [ 5.741883] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.750806] falcon 15a80000.nvenc1: initialized [ 5.751372] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.762681] nvdec 15480000.nvdec: initialized [ 5.763274] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.772233] nvdec 15140000.nvdec1: initialized [ 5.772798] tsec 15500000.tsec: Adding to iommu group 18 [ 5.778720] tsec 15500000.tsec: initialized [ 5.779354] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.788130] tsec 15100000.tsecb: initialized [ 5.792137] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.825626] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.837749] gpio-374 (wifi-enable): hogged as output/high [ 5.838202] gpio-431 (camera-control-output-low): hogged as output/low [ 5.838499] gpio-432 (camera-control-output-low): hogged as output/low [ 5.840217] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.842007] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.842517] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.843809] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.844981] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.850407] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.856124] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.864298] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.871888] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.883335] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.888688] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.894526] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.903387] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.912662] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.919946] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.927597] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.933459] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.943314] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.949298] pva 16000000.pva0: Adding to iommu group 22 [ 5.975644] pva 16000000.pva0: initialized [ 5.980289] pva 16800000.pva1: Adding to iommu group 23 [ 5.991414] pva 16800000.pva1: initialized [ 5.995917] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.008124] nvdla 15880000.nvdla0: initialized [ 6.009342] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.017711] nvdla 158c0000.nvdla1: initialized [ 6.020519] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.020844] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.021664] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.021991] tegradc 15200000.display: Adding to iommu group 26 [ 6.022284] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.022455] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.022655] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.022759] tegradccommon 15200000.display-hub: dma mapping done [ 6.027490] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.029860] tegradc 15210000.display: Adding to iommu group 26 [ 6.050619] tegra_cec 3960000.tegra_cec: probed [ 6.056244] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.063036] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.068169] kfuse 3830000.kfuse: initialized [ 6.072827] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.078528] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.085682] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.091912] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.101105] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.106539] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.115755] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.121261] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.141294] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.141763] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.144550] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.152625] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.161063] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.167836] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.175511] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.182644] usb usb1: Product: xHCI Host Controller [ 6.187627] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.193669] usb usb1: SerialNumber: 3610000.xhci [ 6.199046] hub 1-0:1.0: USB hub found [ 6.202309] hub 1-0:1.0: 4 ports detected [ 6.206811] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.211904] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.219527] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.227023] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.235091] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.242363] usb usb2: Product: xHCI Host Controller [ 6.247069] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.253277] usb usb2: SerialNumber: 3610000.xhci [ 6.258635] hub 2-0:1.0: USB hub found [ 6.262090] hub 2-0:1.0: 4 ports detected [ 6.302608] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.307728] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.308948] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.309165] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.322173] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.323286] tegra194-cpufreq ccplex: probed with BWMGR [ 6.324457] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.325114] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.325592] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.326783] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.336866] tegra194-vi5 15c10000.vi: initialized [ 6.338867] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.340180] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.342031] generic_infoframe_type: 0x87 [ 6.348834] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.352134] tegradc 15200000.display: DT parsed successfully [ 6.360177] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.360185] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.360190] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.360194] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.367196] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.372300] mmc0: CQHCI version 5.10 [ 6.372350] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.373735] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.373739] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.373743] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.374056] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.374062] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.374461] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.375784] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.375788] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.377911] tegradc 15200000.display: probed [ 6.378947] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.414822] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.418368] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.467160] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.476282] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.513047] nvethernet 2490000.ethernet: Macsec not supported [ 6.513341] Console: switching to colour frame buffer device 240x67 [ 6.513370] mmc0: Command Queue Engine enabled [ 6.513376] mmc0: periodic cache flush enabled [ 6.513390] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.513983] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.514359] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.515397] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.515510] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.515625] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.516561] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.518423] tegra-se-nvhost 15810000.se: initialized [ 6.518741] tegradc 15200000.display: fb registered [ 6.523427] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.523733] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.524592] tegra-se-nvhost 15820000.se: initialized [ 6.525100] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.526413] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.526622] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.529195] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.534521] tegra-se-nvhost 15830000.se: initialized [ 6.541957] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.545928] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.546011] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.546497] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.547217] tegra-se-nvhost 15840000.se: initialized [ 6.548581] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.550141] tegra_actmon d230000.actmon: in actmon_register()... [ 6.550298] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.550647] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.551297] hvc_sysfs: hypervisor is not present [ 6.577047] ALSA device list: [ 6.577073] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.693180] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.697839] No soundcards found. [ 6.700763] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.726026] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.726031] usb 1-2: Manufacturer: Generic [ 6.728240] hub 1-2:1.0: USB hub found [ 6.739685] hub 1-2:1.0: 4 ports detected [ 6.760979] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.762378] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.762591] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.767754] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.774398] Extcon AUX1(HDMI) enable [ 6.778081] tegradc 15210000.display: disp1 connected to head1->sor [ 6.784304] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.791419] tegradc 15210000.display: DT parsed successfully [ 6.797110] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.804777] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.811061] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.823962] tegradc 15210000.display: probed [ 6.823991] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.829048] tegradc 15210000.display: fb registered [ 6.837279] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.841426] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.843475] Freeing unused kernel memory: 3968K [ 6.849228] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.859197] tegradc 15210000.display: blank - powerdown [ 6.864368] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.864500] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.867356] Run /init as init process [ 6.872577] Extcon DP: HPD disabled [ 6.872581] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.872590] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.872595] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.907969] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.915269] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.919800] usb 2-3: Manufacturer: Generic [ 6.935966] hub 2-3:1.0: USB hub found [ 6.938305] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.939726] tegradc 15200000.display: blank - powerdown [ 6.962833] Root device found: mmcblk0p1 [ 6.964930] Found dev node: /dev/mmcblk0p1 [ 6.978052] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.978057] Extcon AUX1(HDMI) disable [ 6.983188] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.000370] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.001480] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.002413] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.004625] Rootfs mounted over mmcblk0p1 [ 7.015840] tegradc 15200000.display: unblank [ 7.017198] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.017416] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.023708] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.025670] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.029755] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.029759] Extcon AUX1(HDMI) enable [ 7.034591] Switching from initrd to actual rootfs [ 7.042472] tegradc 15200000.display: sync windows ret = 247 [ 7.043182] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.076617] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.078107] Extcon HDMI: HPD enabled [ 7.079458] tegradc 15200000.display: hdmi: plugged [ 7.129420] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.130895] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.133519] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.134989] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.136425] usb 1-3: Product: Bluetooth Radio [ 7.137732] usb 1-3: Manufacturer: Realtek [ 7.139003] usb 1-3: SerialNumber: 00e04c000001 [ 7.227304] systemd[1]: System time before build time, advancing clock. [ 7.298542] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.303510] systemd[1]: Detected architecture arm64. [ 7.353297] systemd[1]: Set hostname to . [ 7.522766] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.883864] random: systemd: uninitialized urandom read (16 bytes read) [ 7.885708] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.887426] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.893071] systemd[1]: Created slice system-modprobe.slice. [ 7.896816] random: systemd: uninitialized urandom read (16 bytes read) [ 7.899651] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.902923] random: systemd: uninitialized urandom read (16 bytes read) [ 7.905635] systemd[1]: Created slice User and Session Slice. [ 7.909496] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.913859] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.917554] systemd[1]: Reached target User and Group Name Lookups. [ 7.921080] systemd[1]: Reached target Slices. [ 7.924414] systemd[1]: Reached target Swap. [ 7.928677] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.932624] systemd[1]: Listening on Syslog Socket. [ 7.936474] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.940219] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.944785] systemd[1]: Listening on Journal Audit Socket. [ 7.948708] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.952772] systemd[1]: Listening on Journal Socket. [ 7.956755] systemd[1]: Listening on udev Control Socket. [ 7.960563] systemd[1]: Listening on udev Kernel Socket. [ 7.970548] systemd[1]: Mounting Huge Pages File System... [ 7.980778] systemd[1]: Mounting POSIX Message Queue File System... [ 7.989490] systemd[1]: Mounting RPC Pipe File System... [ 7.998697] systemd[1]: Mounting Kernel Debug File System... [ 8.008032] systemd[1]: Mounting Kernel Trace File System... [ 8.018637] systemd[1]: Starting Journal Service... [ 8.028160] systemd[1]: Starting Set the console keyboard layout... [ 8.036967] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.040974] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.042798] random: crng init done [ 8.044613] random: 7 urandom warning(s) missed due to ratelimiting [ 8.048010] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.056228] systemd[1]: Started Nameserver information manager. [ 8.061163] systemd[1]: Reached target Network (Pre). [ 8.068231] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.068425] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.075042] systemd[1]: Starting Load Kernel Modules... [ 8.084137] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.092903] systemd[1]: Starting udev Coldplug all Devices... [ 8.104934] systemd[1]: Mounted Huge Pages File System. [ 8.109035] systemd[1]: Mounted POSIX Message Queue File System. [ 8.113267] systemd[1]: Mounted RPC Pipe File System. [ 8.115392] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.115898] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.116235] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.116243] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.116253] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.116256] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.116449] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.117025] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.117232] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.117241] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.148826] systemd[1]: Mounted Kernel Debug File System. [ 8.152749] systemd[1]: Mounted Kernel Trace File System. [ 8.161101] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.167944] systemd[1]: nvfb-udev.service: Succeeded. [ 8.172564] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.185341] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.198582] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.201428] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.207585] systemd[1]: Starting Load/Save Random Seed... [ 8.217099] systemd[1]: Starting Create System Users... [ 8.227584] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.227584] [ 8.274527] systemd[1]: Finished Load Kernel Modules. [ 8.282610] systemd[1]: Finished Load/Save Random Seed. [ 8.290120] systemd[1]: Finished Set the console keyboard layout. [ 8.295839] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.302904] systemd[1]: Mounting Kernel Configuration File System... [ 8.311539] systemd[1]: Started OP-TEE Client Supplicant. [ 8.321502] systemd[1]: Starting Apply Kernel Variables... [ 8.329966] systemd[1]: Mounted Kernel Configuration File System. [ 8.341959] systemd[1]: Finished Create System Users. [ 8.356086] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.638933] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.644113] imx219 9-0010: board setup failed [ 9.645517] imx219: probe of 9-0010 failed with error -121 [ 9.667215] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.684061] imx219 10-0010: board setup failed [ 9.684197] imx219: probe of 10-0010 failed with error -121 [ 9.825939] hot-surface-alert cooling state: 0 -> 1 [ 10.338004] using random self ethernet address [ 10.339396] using random host ethernet address [ 11.300241] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.301470] Creating 1 MTD partitions on "spi6.0": [ 11.302600] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.005261] using random self ethernet address [ 12.006456] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.869479] nvidia: loading out-of-tree module taints kernel. [ 58.826641] watchdog: watchdog0: watchdog did not stop! [ 59.296709] Trying to unregister non-registered hwtime source [ 62.353270] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.354852] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERÒÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿänal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.421] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.642] I> edid read success [0003.642] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1280, height = 768, frequency = 79500000 [0003.643] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.653] I> width = 1280, height = 720, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 4096, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.727] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.741] initializing target [0003.742] calling apps_init() [0003.742] starting app kernel_boot_app [0003.743] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000646] Console: colour dummy device 80x25 [ 0.002425] printk: console [tty0] enabled [ 0.002487] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002535] pid_max: default: 32768 minimum: 301 [ 0.002748] LSM: Security Framework initializing [ 0.002838] Yama: becoming mindful. [ 0.002879] SELinux: Initializing. [ 0.003095] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003133] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006330] rcu: Hierarchical SRCU implementation. [ 0.006592] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007303] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007378] DTB Build time: Aug 10 2022 20:31:49 [ 0.010324] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010585] Remapping and enabling EFI services. [ 0.012632] smp: Bringing up secondary CPUs ... [ 0.043325] Detected PIPT I-cache on CPU1 [ 0.043403] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073756] Detected PIPT I-cache on CPU2 [ 0.073904] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103579] Detected PIPT I-cache on CPU3 [ 0.103718] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133504] Detected PIPT I-cache on CPU4 [ 0.133662] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163362] Detected PIPT I-cache on CPU5 [ 0.163509] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163917] smp: Brought up 1 node, 6 CPUs [ 0.164242] SMP: Total of 6 processors activated. [ 0.164287] CPU features: detected: Privileged Access Never [ 0.164317] CPU features: detected: LSE atomic instructions [ 0.164339] CPU features: detected: User Access Override [ 0.164361] CPU features: detected: 32-bit EL0 Support [ 0.164382] CPU features: detected: RAS Extension Support [ 0.164402] CPU features: detected: CRC32 instructions [ 0.164423] CPU features: detected: 32-bit EL1 Support [ 0.236069] CPU: All CPU(s) started at EL2 [ 0.241260] devtmpfs: initialized [ 0.289365] Registered cp15_barrier emulation handler [ 0.289476] Registered setend emulation handler [ 0.289504] KASLR enabled [ 0.289762] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289807] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291126] pinctrl core: initialized pinctrl subsystem [ 0.292214] SMBIOS 3.0.0 present. [ 0.292249] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292952] NET: Registered protocol family 16 [ 0.294912] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295424] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296139] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296215] audit: initializing netlink subsys (disabled) [ 0.296529] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296978] thermal_sys: Registered thermal governor 'step_wise' [ 0.296985] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297011] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299177] cpuidle: using governor menu [ 0.299560] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299989] ASID allocator initialised with 32768 entries [ 0.300239] Serial: AMBA PL011 UART driver [ 0.303575] Tegra reboot handler registered. [ 0.372569] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.372709] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.372894] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.372948] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.373098] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.373149] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.373278] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.373328] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.373465] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.373542] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.375631] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.375693] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.375726] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.375778] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.375812] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375848] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.375893] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375929] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375958] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375987] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.376016] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.376048] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.376076] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.376121] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.376150] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.376196] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.376240] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.376337] mc-err: mcerr ops are set to t19x [ 0.388437] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.388493] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.388507] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.388529] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.396767] ACPI: Interpreter disabled. [ 0.398475] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400359] iommu: Default domain type: Translated [ 0.400448] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400936] SCSI subsystem initialized [ 0.401148] usbcore: registered new interface driver usbfs [ 0.401216] usbcore: registered new interface driver hub [ 0.401271] usbcore: registered new device driver usb [ 0.401905] mc: Linux media interface: v0.10 [ 0.401954] videodev: Linux video capture interface: v2.00 [ 0.402346] pps_core: LinuxPPS API ver. 1 registered [ 0.402363] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.402396] PTP clock support registered [ 0.402688] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.403129] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.403222] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.404114] Registered efivars operations [ 0.412616] FPGA manager framework [ 0.412800] Advanced Linux Sound Architecture Driver Initialized. [ 0.413736] Bluetooth: Core ver 2.22 [ 0.413798] NET: Registered protocol family 31 [ 0.413817] Bluetooth: HCI device and connection manager initialized [ 0.413841] Bluetooth: HCI socket layer initialized [ 0.413859] Bluetooth: L2CAP socket layer initialized [ 0.413890] Bluetooth: SCO socket layer initialized [ 0.415979] camchar: rtcpu character device driver loaded [ 0.416996] clocksource: Switched to clocksource arch_sys_counter [ 0.819967] VFS: Disk quotas dquot_6.6.0 [ 0.820087] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.820507] pnp: PnP ACPI: disabled [ 0.835297] la/ptsa driver initialized. [ 0.835485] NET: Registered protocol family 2 [ 0.835690] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.844158] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.844320] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.844706] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.845417] TCP: Hash tables configured (established 65536 bind 65536) [ 0.845586] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.845728] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.846019] NET: Registered protocol family 1 [ 0.846765] RPC: Registered named UNIX socket transport module. [ 0.846803] RPC: Registered udp transport module. [ 0.846819] RPC: Registered tcp transport module. [ 0.846834] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.846860] PCI: CLS 0 bytes, default 64 [ 0.847182] Trying to unpack rootfs image as initramfs... [ 1.119994] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.123239] Freeing initrd memory: 8196K [ 1.127571] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.127619] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.127659] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.127972] kvm [1]: IPA Size Limit: 40 bits [ 1.128483] kvm [1]: vgic interrupt IRQ9 [ 1.129072] kvm [1]: VHE mode initialized successfully [ 1.130594] Initialise system trusted keyrings [ 1.130929] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.137944] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.138784] NFS: Registering the id_resolver key type [ 1.138822] Key type id_resolver registered [ 1.138839] Key type id_legacy registered [ 1.138965] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.138994] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.139031] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.148673] NET: Registered protocol family 38 [ 1.148698] Key type asymmetric registered [ 1.148714] Asymmetric key parser 'x509' registered [ 1.148791] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.149020] io scheduler mq-deadline registered [ 1.149040] io scheduler kyber registered [ 1.155359] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.158670] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.158752] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.158826] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.158896] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.158967] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.165525] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.165743] scrncapt: init (heads:4 wins:6 planes:4) [ 1.167101] EINJ: ACPI disabled. [ 1.170626] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.170653] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.170668] tegra-pmc: ### PMC reset level: L1 [ 1.170714] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.170777] tegra-pmc: PMC Prod config success [ 1.176124] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.181641] random: fast init done [ 1.182078] printk: console [ttyTCU0] enabled [ 2.733444] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.738266] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.742599] arm-smmu 10000000.iommu: stage 1 translation [ 2.748180] arm-smmu 10000000.iommu: stage 2 translation [ 2.753843] arm-smmu 10000000.iommu: nested translation [ 2.759184] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.766346] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.776857] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.779214] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.786032] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.793583] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.798816] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.803537] arm-smmu 12000000.iommu: stage 1 translation [ 2.809049] arm-smmu 12000000.iommu: stage 2 translation [ 2.814728] arm-smmu 12000000.iommu: nested translation [ 2.819912] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.827081] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.837717] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.840175] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.846762] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.854452] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.863973] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.867457] tegra_profiler: auth: init [ 2.871450] THERMAL EST: found 3 subdevs [ 2.875119] THERMAL EST num_resources: 0 [ 2.878735] [THERMAL EST subdev 0] [ 2.882277] [THERMAL EST subdev 1] [ 2.885431] [THERMAL EST subdev 2] [ 2.888915] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.895419] THERMAL EST: thz register success. [ 2.899639] THERMAL EST: end of probe, return err: 0 [ 2.904678] nvsciipc: loaded module [ 2.912017] tun: Universal TUN/TAP device driver, 1.6 [ 2.914353] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.920706] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.926006] e1000e: Intel(R) PRO/1000 Network Driver [ 2.931189] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.937043] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.942564] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.948820] PPP generic driver version 2.4.2 [ 2.952738] PPP BSD Compression module registered [ 2.957540] PPP Deflate Compression module registered [ 2.962785] PPP MPPE Compression module registered [ 2.967552] usbcore: registered new interface driver r8152 [ 2.973332] usbcore: registered new interface driver asix [ 2.978387] usbcore: registered new interface driver ax88179_178a [ 2.984512] usbcore: registered new interface driver cdc_ether [ 2.990462] usbcore: registered new interface driver net1080 [ 2.996061] usbcore: registered new interface driver cdc_subset [ 3.002372] usbcore: registered new interface driver zaurus [ 3.007796] usbcore: registered new interface driver cdc_ncm [ 3.013480] usbcore: registered new interface driver aqc111 [ 3.019139] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.025450] ohci-pci: OHCI PCI platform driver [ 3.029493] ohci-platform: OHCI generic platform driver [ 3.035323] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.041953] usbcore: registered new interface driver uas [ 3.046044] usbcore: registered new interface driver usb-storage [ 3.051962] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.057907] mousedev: PS/2 mouse device common for all mice [ 3.062953] usbcore: registered new interface driver xpad [ 3.071322] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.073702] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.081462] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.088059] i2c /dev entries driver [ 3.091346] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.097385] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.102780] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.108170] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.113237] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.118722] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.124205] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.137617] device-mapper: uevent: version 1.0.3 [ 3.138097] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.144566] cpuidle: Initializing cpuidle driver [ 3.148673] sdhci: Secure Digital Host Controller Interface driver [ 3.153545] sdhci: Copyright(c) Pierre Ossman [ 3.157385] Synopsys Designware Multimedia Card Interface Driver [ 3.163854] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.169748] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.175532] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.182764] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.204483] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.214749] vdd-1v0: supplied by regulator-dummy [ 3.220359] vdd-1v8-hs: supplied by regulator-dummy [ 3.225318] vdd-1v8-ls: supplied by regulator-dummy [ 3.230190] vdd-1v8-ao: supplied by regulator-dummy [ 3.234165] vddio-ddr-1v1: supplied by regulator-dummy [ 3.238716] vdd-rtc: supplied by regulator-dummy [ 3.240512] spmic-ldo1: supplied by regulator-dummy [ 3.241846] vdd-ao-3v3: supplied by regulator-dummy [ 3.248081] vddio-emmc-3v3: supplied by regulator-dummy [ 3.254477] spmic-ldo4: supplied by regulator-dummy [ 3.255758] vdd-usb-3v3: supplied by regulator-dummy [ 3.261998] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.268400] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.273993] spmic-ldo8: supplied by vdd-1v8-ls [ 3.275512] gpio-510 (gpio_default): hogged as output/high [ 3.276898] gpio-511 (gpio_default): hogged as output/high [ 3.279830] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.415891] max77686-rtc max77620-rtc: registered as rtc0 [ 3.417322] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.417718] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.233376] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.234512] hid: raw HID events driver (C) Jiri Kosina [ 4.235450] usbcore: registered new interface driver usbhid [ 4.235627] usbhid: USB HID core driver [ 4.237779] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.239144] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.270420] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.344560] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.949 ms) ÿá[ 4.323488] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.324073] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.325085] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.325836] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.327497] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.328245] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.328861] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.330290] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.330514] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.333045] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.340149] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.346514] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.351485] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.357283] denver_knobs_init:MTS_VERSION:55637613 [ 4.370192] t19x_cache tegra-cache: probed [ 4.373176] optee: probing for conduit method. [ 4.374056] optee: revision 3.16 (65cc2218) [ 4.375061] optee: dynamic shared memory is enabled [ 4.378281] optee: initialized driver [ 4.385178] nvpmodel: initialized successfully [ 4.385711] tegra_hv: get_hvd: not initialized yet [ 4.390422] user_ivc_mempool: hypervisor not present [ 4.396614] usbcore: registered new interface driver snd-usb-audio [ 4.403219] u32 classifier [ 4.404177] input device check on [ 4.407977] Actions configured [ 4.411811] Initializing XFRM netlink socket [ 4.416835] NET: Registered protocol family 10 [ 4.423377] Segment Routing with IPv6 [ 4.424060] NET: Registered protocol family 17 [ 4.428204] NET: Registered protocol family 15 [ 4.432656] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.446323] Bluetooth: RFCOMM socket layer initialized [ 4.450790] Bluetooth: RFCOMM ver 1.11 [ 4.454895] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.460502] Bluetooth: HIDP socket layer initialized [ 4.466480] 9pnet: Installing 9P2000 support [ 4.470214] Key type dns_resolver registered [ 4.475432] registered taskstats version 1 [ 4.478622] Loading compiled-in X.509 certificates [ 4.490920] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.494543] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.504371] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.506606] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.514860] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.523360] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.641118] tegra194-pcie 14160000.pcie: Link up [ 4.644121] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.644348] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.644549] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.644772] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.645037] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.645421] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.645880] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.658810] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.659280] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.659786] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.661367] pci 0004:01:00.0: supports D1 D2 [ 4.661548] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.669839] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.670187] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.670417] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.670783] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.671039] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.671300] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.675746] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.683107] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.691872] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.701922] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.706655] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.711894] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.718574] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.728471] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.729851] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.738023] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.746751] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.861883] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.862432] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.862664] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.862810] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.863159] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.863413] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.863808] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.864336] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.887657] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.888051] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.890083] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.891204] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.892807] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.894550] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.895717] pci 0005:00:00.0: Removing from iommu group 7 [ 5.896027] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.931323] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.957720] host1x 13e10000.host1x: initialized [ 5.959392] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.960376] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.962011] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.962698] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.963936] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.964528] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.965867] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.966483] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.967415] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.968049] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.971878] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.978992] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.988788] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.996088] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.005919] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.012903] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.022600] falcon 15340000.vic: Adding to iommu group 17 [ 6.037193] falcon 15340000.vic: initialized [ 6.038142] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.043016] falcon 15380000.nvjpg: initialized [ 6.043587] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.055223] falcon 154c0000.nvenc: initialized [ 6.055860] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.067677] falcon 15a80000.nvenc1: initialized [ 6.068346] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.079303] nvdec 15480000.nvdec: initialized [ 6.079897] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.089329] nvdec 15140000.nvdec1: initialized [ 6.089929] tsec 15500000.tsec: Adding to iommu group 18 [ 6.095456] tsec 15500000.tsec: initialized [ 6.096064] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.103176] tsec 15100000.tsecb: initialized [ 6.107026] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.137082] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.150666] gpio-374 (wifi-enable): hogged as output/high [ 6.151022] gpio-431 (camera-control-output-low): hogged as output/low [ 6.151377] gpio-432 (camera-control-output-low): hogged as output/low [ 6.153425] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.155428] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.155916] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.157330] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.159256] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.165648] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.170718] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.179187] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.186450] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.197767] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.203569] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.209007] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.217840] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.227265] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.234417] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.242055] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.248118] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.258333] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.264271] pva 16000000.pva0: Adding to iommu group 22 [ 6.291459] pva 16000000.pva0: initialized [ 6.296714] pva 16800000.pva1: Adding to iommu group 23 [ 6.308520] pva 16800000.pva1: initialized [ 6.313798] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.327719] nvdla 15880000.nvdla0: initialized [ 6.329215] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.337772] nvdla 158c0000.nvdla1: initialized [ 6.340113] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.340447] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.341756] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.342054] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.342399] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.342452] tegradc 15200000.display: Adding to iommu group 26 [ 6.342519] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.342923] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.342935] tegra_cec 3960000.tegra_cec: probed [ 6.344611] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.347789] tegradccommon 15200000.display-hub: dma mapping done [ 6.349418] tegradc 15210000.display: Adding to iommu group 26 [ 6.356256] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.383198] kfuse 3830000.kfuse: initialized [ 6.387716] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.393494] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.400351] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.406945] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.416128] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.421805] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.430493] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.435941] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.457086] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.457453] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.459180] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.467130] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.475794] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.482863] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.490316] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.497098] usb usb1: Product: xHCI Host Controller [ 6.502316] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.508610] usb usb1: SerialNumber: 3610000.xhci [ 6.514510] hub 1-0:1.0: USB hub found [ 6.517244] hub 1-0:1.0: 4 ports detected [ 6.520153] random: crng init done [ 6.522051] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.530181] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.537628] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.545270] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.552896] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.560153] usb usb2: Product: xHCI Host Controller [ 6.565308] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.571521] usb usb2: SerialNumber: 3610000.xhci [ 6.576659] hub 2-0:1.0: USB hub found [ 6.579809] hub 2-0:1.0: 4 ports detected [ 6.625356] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.631451] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.633113] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.633280] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.646242] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.647289] tegra194-cpufreq ccplex: probed with BWMGR [ 6.648427] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.648902] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.649345] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.650716] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.657956] tegra194-vi5 15c10000.vi: initialized [ 6.659546] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.660016] generic_infoframe_type: 0x87 [ 6.661252] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.664307] tegradc 15200000.display: DT parsed successfully [ 6.670443] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.676228] tegradc 15200000.display: Display dc.0000000052a53d34 registered with id=0 [ 6.684150] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.692219] mmc0: CQHCI version 5.10 [ 6.693552] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.693557] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.693561] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.693869] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.693875] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.694250] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.695399] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.695403] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.697675] tegradc 15200000.display: probed [ 6.698619] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.731210] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.732946] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.781013] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.783539] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.803842] Console: switching to colour frame buffer device 240x67 [ 6.809063] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.809352] tegradc 15200000.display: fb registered [ 6.816075] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.820873] irq: IRQ264: trimming hierarchy from :pmc@c360000 [ 6.825385] mmc0: Command Queue Engine enabled [ 6.825390] mmc0: periodic cache flush enabled [ 6.825406] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.825957] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.826149] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.827635] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.830098] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.834313] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.839175] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.842187] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.895287] nvethernet 2490000.ethernet: Macsec not supported [ 6.902168] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.910179] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 6.914607] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.915093] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 6.924688] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.930756] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.938572] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.939251] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.946496] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.953266] Extcon AUX1(HDMI) enable [ 6.953554] tegradc 15210000.display: disp1 connected to head1->sor [ 6.976486] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.977246] tegra-se-nvhost 15810000.se: initialized [ 6.979550] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.979555] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.979559] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.979576] usb 1-2: Manufacturer: Generic [ 6.981427] hub 1-2:1.0: USB hub found [ 6.982527] hub 1-2:1.0: 4 ports detected [ 6.983994] tegradc 15210000.display: DT parsed successfully [ 6.990048] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.996987] tegradc 15210000.display: Display dc.0000000024d8bb91 registered with id=1 [ 6.997110] tegradc 15210000.display: vblank syncpt # 12 for dc 1 [ 7.005005] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.008835] tegradc 15210000.display: vpulse3 syncpt # 13 for dc 1 [ 7.013634] tegra-se-nvhost 15820000.se: initialized [ 7.023737] tegradc 15210000.display: probed [ 7.028551] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.075400] tegradc 15210000.display: fb registered [ 7.075884] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.077881] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.083611] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.086817] tegra-se-nvhost 15830000.se: initialized [ 7.093712] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.093724] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.101705] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.114084] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.119175] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.124778] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.124784] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.124790] usb 2-3: Manufacturer: Generic [ 7.151121] tegra-se-nvhost 15840000.se: initialized ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.160170] tegradc 15200000.display: blank - powerdown [ 7.161763] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.163344] tegra_actmon d230000.actmon: in actmon_register()... [ 7.163524] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.163930] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.164429] hvc_sysfs: hypervisor is not present [ 7.166090] hub 2-3:1.0: USB hub found [ 7.167965] hub 2-3:1.0: 4 ports detected [ 7.190732] ALSA device list: [ 7.190739] No soundcards found. [ 7.198374] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.198379] Extcon AUX1(HDMI) disable [ 7.221750] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.222636] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.233072] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.234241] tegradc 15200000.display: unblank [ 7.235489] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.235680] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.241414] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.243302] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.247337] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.247341] Extcon AUX1(HDMI) enable [ 7.260058] tegradc 15200000.display: sync windows ret = 247 [ 7.299191] tegradc 15210000.display: blank - powerdown [ 7.304586] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.304590] Extcon DP: HPD disabled [ 7.304594] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.304606] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.304612] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.336135] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.337188] Freeing unused kernel memory: 3968K [ 7.343590] Extcon HDMI: HPD enabled [ 7.343603] tegradc 15200000.display: hdmi: plugged [ 7.348288] Run /init as init process [ 7.361049] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.382075] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.383508] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.385058] usb 1-3: Product: Bluetooth Radio [ 7.386404] usb 1-3: Manufacturer: Realtek [ 7.390604] usb 1-3: SerialNumber: 00e04c000001 [ 7.416235] Root device found: mmcblk0p1 [ 7.419722] Found dev node: /dev/mmcblk0p1 [ 7.425600] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.426971] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.456308] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.461820] Rootfs mounted over mmcblk0p1 [ 7.491618] Switching from initrd to actual rootfs [ 7.661662] systemd[1]: System time before build time, advancing clock. [ 7.733931] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.738676] systemd[1]: Detected architecture arm64. [ 7.775090] systemd[1]: Set hostname to . [ 7.940252] systemd-sysv-generator[245]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.292193] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.293947] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.299474] systemd[1]: Created slice system-modprobe.slice. [ 8.304064] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.308110] systemd[1]: Created slice User and Session Slice. [ 8.311576] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.315598] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.318824] systemd[1]: Reached target User and Group Name Lookups. [ 8.321940] systemd[1]: Reached target Slices. [ 8.324914] systemd[1]: Reached target Swap. [ 8.328933] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.332521] systemd[1]: Listening on Syslog Socket. [ 8.336018] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.339469] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.343769] systemd[1]: Listening on Journal Audit Socket. [ 8.347400] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.352681] systemd[1]: Listening on Journal Socket. [ 8.356858] systemd[1]: Listening on udev Control Socket. [ 8.361093] systemd[1]: Listening on udev Kernel Socket. [ 8.369440] systemd[1]: Mounting Huge Pages File System... [ 8.377665] systemd[1]: Mounting POSIX Message Queue File System... [ 8.385791] systemd[1]: Mounting RPC Pipe File System... [ 8.394314] systemd[1]: Mounting Kernel Debug File System... [ 8.403071] systemd[1]: Mounting Kernel Trace File System... [ 8.413083] systemd[1]: Starting Journal Service... [ 8.421923] systemd[1]: Starting Set the console keyboard layout... [ 8.430340] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.433994] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.440281] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.448117] systemd[1]: Started Nameserver information manager. [ 8.453347] systemd[1]: Reached target Network (Pre). [ 8.460647] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.462984] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.469454] systemd[1]: Starting Load Kernel Modules... [ 8.477241] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.485237] systemd[1]: Starting udev Coldplug all Devices... [ 8.496324] systemd[1]: Mounted Huge Pages File System. [ 8.500349] systemd[1]: Mounted POSIX Message Queue File System. [ 8.504016] systemd[1]: Mounted RPC Pipe File System. [ 8.507628] systemd[1]: Mounted Kernel Debug File System. [ 8.508133] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.510341] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.512661] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.512667] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.512675] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.512679] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.513641] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.513836] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.522670] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.524202] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.525845] systemd[1]: Mounted Kernel Trace File System. [ 8.539352] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.547340] systemd[1]: nvfb-udev.service: Succeeded. [ 8.551817] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.562695] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.567888] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.570234] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.583689] systemd[1]: Starting Load/Save Random Seed... [ 8.592018] systemd[1]: Starting Create System Users... [ 8.640742] systemd[1]: Finished Load/Save Random Seed. [ 8.642465] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.642465] [ 8.655953] systemd[1]: Finished Create System Users. [ 8.663989] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.671225] systemd[1]: Finished Load Kernel Modules. [ 8.678549] systemd[1]: Finished Set the console keyboard layout. [ 8.683050] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.689521] systemd[1]: Mounting Kernel Configuration File System... [ 8.697576] systemd[1]: Started OP-TEE Client Supplicant. [ 8.706011] systemd[1]: Starting Apply Kernel Variables... [ 8.715527] systemd[1]: Mounted Kernel Configuration File System. [ 8.722717] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.728084] systemd[1]: Reached target Local File Systems (Pre). [ 8.731237] systemd[1]: Reached target Local File Systems. [ 8.734439] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 8.740420] systemd[1]: Starting Enable support for additional executable binary formats... [ 10.081256] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.087718] imx219 9-0010: board setup failed [ 10.089032] imx219: probe of 9-0010 failed with error -121 [ 10.103577] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.113084] imx219 10-0010: board setup failed [ 10.114366] imx219: probe of 10-0010 failed with error -121 [ 10.158654] hot-surface-alert cooling state: 0 -> 1 [ 10.699779] using random self ethernet address [ 10.700940] using random host ethernet address [ 11.806707] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.808461] Creating 1 MTD partitions on "spi6.0": [ 11.810980] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.182876] using random self ethernet address [ 12.182883] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.800135] nvidia: loading out-of-tree module taints kernel. [ 58.499881] watchdog: watchdog0: watchdog did not stop! [ 58.958093] Trying to unregister non-registered hwtime source [ 62.016886] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.019131] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy : 1üÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.327] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.361] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.035] > DEVICE_PROD: device prod is not initialized. [0002.341] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.342] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.342] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.343] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.343] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.343] I> dram_block larger than 80000000 [0002.346] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.357] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.360] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿänalÿâadc initialized ÿä ÿâfmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.211] I> Welcome to NVDisp-Init [0003.212] I> NVDisp-Init version: t194-f9ecfedc [0003.212] I> CPU-BL Params @ 0xca020000 [0003.212] I> 0) Base:0x00000000 Size:0x00000000 [0003.213] I> 1) Base:0xc8300000 Size:0x00100000 [0003.213] I> 2) Base:0xc9800000 Size:0x00200000 [0003.213] I> 3) Base:0xc8600000 Size:0x00200000 [0003.216] I> 4) Base:0xc8200000 Size:0x00100000 [0003.220] I> 5) Base:0xc8100000 Size:0x00100000 [0003.225] I> 6) Base:0xc9400000 Size:0x00400000 [0003.229] I> 7) Base:0xc9000000 Size:0x00400000 [0003.234] I> 8) Base:0xc8000000 Size:0x00100000 [0003.238] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.242] I> 10) Base:0xca800000 Size:0x00800000 [0003.247] I> 11) Base:0x40000000 Size:0x00040000 [0003.251] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.256] I> 13) Base:0x40046000 Size:0x00002000 [0003.260] I> 14) Base:0x40048000 Size:0x00002000 [0003.265] I> 15) Base:0xaf000000 Size:0x00004000 [0003.269] I> 16) Base:0x4004a000 Size:0x00002000 [0003.274] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.278] I> 18) Base:0x4004c000 Size:0x00002000 [0003.283] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.287] I> 20) Base:0x4004e000 Size:0x00002000 [0003.292] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.296] I> 22) Base:0x00000000 Size:0x00000000 [0003.300] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.305] I> 24) Base:0xcc000000 Size:0x02000000 [0003.309] I> 25) Base:0x40050000 Size:0x00002000 [0003.314] I> 26) Base:0x40040000 Size:0x00006000 [0003.318] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.323] I> 28) Base:0xc8400000 Size:0x00200000 [0003.327] I> 29) Base:0xc8800000 Size:0x00400000 [0003.332] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.336] I> 31) Base:0x00000000 Size:0x00000000 [0003.341] I> 32) Base:0xf8000000 Size:0x08000000 [0003.345] I> 33) Base:0xce000000 Size:0x2a000000 [0003.350] I> 34) Base:0xcb000000 Size:0x01000000 [0003.354] I> 35) Base:0xae000000 Size:0x01000000 [0003.358] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.363] I> 37) Base:0xca000000 Size:0x00800000 [0003.367] I> 38) Base:0x80000000 Size:0x20000000 [0003.372] I> 39) Base:0xb0000000 Size:0x08000000 [0003.376] I> 40) Base:0x00000000 Size:0x00000000 [0003.381] I> 41) Base:0x00000000 Size:0x00000000 [0003.385] I> 42) Base:0x00000000 Size:0x00000000 [0003.390] I> 43) Base:0x00000000 Size:0x00000000 [0003.394] I> 44) Base:0x00000000 Size:0x00000000 [0003.399] I> 45) Base:0x00000000 Size:0x00000000 [0003.403] GIC-SPI Target CPU: 0 [0003.406] Interrupts Init done [0003.409] calling constructors [0003.412] initializing heap [0003.414] I> Heap: [0xa0960000 ... 0xadf00000] [0003.419] initializing threads [0003.422] initializing timers [0003.424] creating bootstrap completion thread [0003.429] top of bootstrap2() [0003.432] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.436] initializing platform [0003.439] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.445] W> device prod register failed [0003.448] I> Bl_dtb @0xadf00000 [0003.451] I> gpio framework initialized [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.468] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.474] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.496] I> Boot_device: QSPI_FLASH instance: 0 [0003.500] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.511] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.518] I> QSPI source rate = 204000 Khz [0003.521] I> Requested rate for QSPI clock = 34000 Khz [0003.526] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.531] I> tx_clk_tap_delay : 0 [0003.534] I> rx_clk_tap_delay : 16 [0003.537] I> QSPI Flash Size = 32 MB [0003.545] I> Qspi initialized successfully [0003.545] I> qspi flash-0 params source = boot args [0003.550] W> No board IDs available [0003.552] E> Failed to get board id info! [0003.559] I> sdmmc-3 params source = safe params [0003.565] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.567] W> Cannot find any partition table for 00000003 [0003.571] E> Failed to publish 00000003 [0003.576] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.649] I> edid read success [0003.649] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.650] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 4096, height = 2160, frequency = 296703296 [0003.723] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.734] I> hdmi_enable, starting HDMI initialisation [0003.739] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.749] calling apps_init() [0003.750] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932984K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475332K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000867] Console: colour dummy device 80x25 [ 0.002214] printk: console [tty0] enabled [ 0.002276] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002313] pid_max: default: 32768 minimum: 301 [ 0.002521] LSM: Security Framework initializing [ 0.002590] Yama: becoming mindful. [ 0.002635] SELinux: Initializing. [ 0.002798] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002835] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005643] rcu: Hierarchical SRCU implementation. [ 0.005899] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007015] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007073] DTB Build time: Aug 10 2022 20:31:49 [ 0.010455] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010713] Remapping and enabling EFI services. [ 0.013045] smp: Bringing up secondary CPUs ... [ 0.042284] Detected PIPT I-cache on CPU1 [ 0.042388] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072092] Detected PIPT I-cache on CPU2 [ 0.072194] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101854] Detected PIPT I-cache on CPU3 [ 0.101949] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131662] Detected PIPT I-cache on CPU4 [ 0.131761] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161434] Detected PIPT I-cache on CPU5 [ 0.161502] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161837] smp: Brought up 1 node, 6 CPUs [ 0.162085] SMP: Total of 6 processors activated. [ 0.162136] CPU features: detected: Privileged Access Never [ 0.162160] CPU features: detected: LSE atomic instructions [ 0.162180] CPU features: detected: User Access Override [ 0.162201] CPU features: detected: 32-bit EL0 Support [ 0.162220] CPU features: detected: RAS Extension Support [ 0.162240] CPU features: detected: CRC32 instructions [ 0.162260] CPU features: detected: 32-bit EL1 Support [ 0.228857] CPU: All CPU(s) started at EL2 [ 0.234969] devtmpfs: initialized [ 0.285108] Registered cp15_barrier emulation handler [ 0.285228] Registered setend emulation handler [ 0.285254] KASLR enabled [ 0.285542] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285595] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286938] pinctrl core: initialized pinctrl subsystem [ 0.288028] SMBIOS 3.0.0 present. [ 0.288060] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288860] NET: Registered protocol family 16 [ 0.290832] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291366] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292086] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292159] audit: initializing netlink subsys (disabled) [ 0.292493] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292813] thermal_sys: Registered thermal governor 'step_wise' [ 0.292820] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292868] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294820] cpuidle: using governor menu [ 0.295394] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295954] ASID allocator initialised with 32768 entries [ 0.296242] Serial: AMBA PL011 UART driver [ 0.300660] Tegra reboot handler registered. [ 0.363376] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.363511] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.363716] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.363787] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.363956] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.364008] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.364136] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.364185] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.364319] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.364384] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.367134] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.367179] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.367216] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.367252] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.367307] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.367341] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.367405] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.367459] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.367491] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.367523] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.367554] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.367586] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.367618] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.367650] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.367682] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.367713] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.367745] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.367868] mc-err: mcerr ops are set to t19x [ 0.379591] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.379627] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.379640] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.379652] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.387002] ACPI: Interpreter disabled. [ 0.388143] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.389466] iommu: Default domain type: Translated [ 0.389575] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.389973] SCSI subsystem initialized [ 0.390128] usbcore: registered new interface driver usbfs [ 0.390171] usbcore: registered new interface driver hub [ 0.390204] usbcore: registered new device driver usb [ 0.390611] mc: Linux media interface: v0.10 [ 0.390637] videodev: Linux video capture interface: v2.00 [ 0.390962] pps_core: LinuxPPS API ver. 1 registered [ 0.390974] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.390994] PTP clock support registered [ 0.391195] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.391514] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.391567] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.392210] Registered efivars operations [ 0.397538] FPGA manager framework [ 0.397662] Advanced Linux Sound Architecture Driver Initialized. [ 0.398233] Bluetooth: Core ver 2.22 [ 0.398276] NET: Registered protocol family 31 [ 0.398288] Bluetooth: HCI device and connection manager initialized [ 0.398304] Bluetooth: HCI socket layer initialized [ 0.398320] Bluetooth: L2CAP socket layer initialized [ 0.398343] Bluetooth: SCO socket layer initialized [ 0.399872] camchar: rtcpu character device driver loaded [ 0.400692] clocksource: Switched to clocksource arch_sys_counter [ 0.702543] VFS: Disk quotas dquot_6.6.0 [ 0.702652] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.703035] pnp: PnP ACPI: disabled [ 0.713461] la/ptsa driver initialized. [ 0.713584] NET: Registered protocol family 2 [ 0.713784] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.718992] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.719091] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.719412] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.719858] TCP: Hash tables configured (established 65536 bind 65536) [ 0.719999] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.720104] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.720307] NET: Registered protocol family 1 [ 0.721361] RPC: Registered named UNIX socket transport module. [ 0.721419] RPC: Registered udp transport module. [ 0.721451] RPC: Registered tcp transport module. [ 0.721475] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.721505] PCI: CLS 0 bytes, default 64 [ 0.721859] Trying to unpack rootfs image as initramfs... [ 0.992781] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.995935] Freeing initrd memory: 8196K [ 1.000849] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.000901] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.000966] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.001352] kvm [1]: IPA Size Limit: 40 bits [ 1.001921] kvm [1]: vgic interrupt IRQ9 [ 1.002392] kvm [1]: VHE mode initialized successfully [ 1.003886] Initialise system trusted keyrings [ 1.004214] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.009570] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.010367] NFS: Registering the id_resolver key type [ 1.010418] Key type id_resolver registered [ 1.010443] Key type id_legacy registered [ 1.010534] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.010594] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.010643] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.020480] NET: Registered protocol family 38 [ 1.020515] Key type asymmetric registered [ 1.020555] Asymmetric key parser 'x509' registered [ 1.020651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.020960] io scheduler mq-deadline registered [ 1.020989] io scheduler kyber registered [ 1.027236] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.030390] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.030480] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.030558] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.030632] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.030703] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.036070] scrncapt: init (heads:4 wins:6 planes:4) [ 1.036109] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.037216] EINJ: ACPI disabled. [ 1.040371] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.040399] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.040414] tegra-pmc: ### PMC reset level: L1 [ 1.040429] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.040481] tegra-pmc: PMC Prod config success [ 1.045363] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.065854] random: fast init done [ 1.073730] printk: console [ttyTCU0] enabled [ 2.602924] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.607210] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.611790] arm-smmu 10000000.iommu: stage 1 translation [ 2.617627] arm-smmu 10000000.iommu: stage 2 translation [ 2.623028] arm-smmu 10000000.iommu: nested translation [ 2.628363] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.635538] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.645872] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.648667] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.654969] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.662991] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.668006] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.673014] arm-smmu 12000000.iommu: stage 1 translation [ 2.678504] arm-smmu 12000000.iommu: stage 2 translation [ 2.683922] arm-smmu 12000000.iommu: nested translation [ 2.689375] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.696527] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.706797] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.709399] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.715980] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.723622] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.733027] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.736346] tegra_profiler: auth: init [ 2.740902] THERMAL EST: found 3 subdevs [ 2.744277] THERMAL EST num_resources: 0 [ 2.748153] [THERMAL EST subdev 0] [ 2.751224] [THERMAL EST subdev 1] [ 2.754627] [THERMAL EST subdev 2] [ 2.757899] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.764356] THERMAL EST: thz register success. [ 2.768828] THERMAL EST: end of probe, return err: 0 [ 2.773840] nvsciipc: loaded module [ 2.781016] tun: Universal TUN/TAP device driver, 1.6 [ 2.783363] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.789676] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.795466] e1000e: Intel(R) PRO/1000 Network Driver [ 2.800389] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.806460] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.811502] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.817701] PPP generic driver version 2.4.2 [ 2.821953] PPP BSD Compression module registered [ 2.826473] PPP Deflate Compression module registered [ 2.831722] PPP MPPE Compression module registered [ 2.836993] usbcore: registered new interface driver r8152 [ 2.842250] usbcore: registered new interface driver asix [ 2.847836] usbcore: registered new interface driver ax88179_178a [ 2.853958] usbcore: registered new interface driver cdc_ether [ 2.859651] usbcore: registered new interface driver net1080 [ 2.865254] usbcore: registered new interface driver cdc_subset [ 2.871554] usbcore: registered new interface driver zaurus [ 2.877256] usbcore: registered new interface driver cdc_ncm [ 2.882932] usbcore: registered new interface driver aqc111 [ 2.888290] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.894639] ohci-pci: OHCI PCI platform driver [ 2.898689] ohci-platform: OHCI generic platform driver [ 2.904503] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.911099] usbcore: registered new interface driver uas [ 2.915257] usbcore: registered new interface driver usb-storage [ 2.921111] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.927195] mousedev: PS/2 mouse device common for all mice [ 2.932395] usbcore: registered new interface driver xpad [ 2.940272] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.943167] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.950919] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.957239] i2c /dev entries driver [ 2.960516] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.966379] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.971885] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.977296] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.982409] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.988168] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.993364] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.006578] device-mapper: uevent: version 1.0.3 [ 3.007058] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.013956] cpuidle: Initializing cpuidle driver [ 3.017726] sdhci: Secure Digital Host Controller Interface driver [ 3.022741] sdhci: Copyright(c) Pierre Ossman [ 3.026580] Synopsys Designware Multimedia Card Interface Driver [ 3.032782] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.038738] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.039511] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.052082] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.073941] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.083573] vdd-1v0: supplied by regulator-dummy [ 3.089027] vdd-1v8-hs: supplied by regulator-dummy [ 3.093872] vdd-1v8-ls: supplied by regulator-dummy [ 3.098702] vdd-1v8-ao: supplied by regulator-dummy [ 3.102698] vddio-ddr-1v1: supplied by regulator-dummy [ 3.107246] vdd-rtc: supplied by regulator-dummy [ 3.108978] spmic-ldo1: supplied by regulator-dummy [ 3.110245] vdd-ao-3v3: supplied by regulator-dummy [ 3.116416] vddio-emmc-3v3: supplied by regulator-dummy [ 3.122774] spmic-ldo4: supplied by regulator-dummy [ 3.124025] vdd-usb-3v3: supplied by regulator-dummy [ 3.130160] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.136385] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.141990] spmic-ldo8: supplied by vdd-1v8-ls [ 3.143463] gpio-510 (gpio_default): hogged as output/high [ 3.144837] gpio-511 (gpio_default): hogged as output/high [ 3.147699] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.285057] max77686-rtc max77620-rtc: registered as rtc0 [ 3.286107] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.286433] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.115142] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.116360] hid: raw HID events driver (C) Jiri Kosina [ 4.117241] usbcore: registered new interface driver usbhid [ 4.117395] usbhid: USB HID core driver [ 4.119423] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.120925] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.113561] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.187751] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.999 ms) ÿá[ 4.205354] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.206091] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.207366] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.208259] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.210109] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.210731] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.211409] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.213142] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.213336] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.216404] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.221991] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.227925] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.233143] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.239747] denver_knobs_init:MTS_VERSION:55637613 [ 4.251394] t19x_cache tegra-cache: probed [ 4.254338] optee: probing for conduit method. [ 4.255216] optee: revision 3.16 (65cc2218) [ 4.256192] optee: dynamic shared memory is enabled [ 4.260290] optee: initialized driver [ 4.267194] nvpmodel: initialized successfully [ 4.267819] tegra_hv: get_hvd: not initialized yet [ 4.272699] user_ivc_mempool: hypervisor not present [ 4.279074] usbcore: registered new interface driver snd-usb-audio [ 4.284958] u32 classifier [ 4.286215] input device check on [ 4.289836] Actions configured [ 4.293549] Initializing XFRM netlink socket [ 4.298431] NET: Registered protocol family 10 [ 4.305387] Segment Routing with IPv6 [ 4.305696] NET: Registered protocol family 17 [ 4.309910] NET: Registered protocol family 15 [ 4.314383] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.327963] Bluetooth: RFCOMM socket layer initialized [ 4.332917] Bluetooth: RFCOMM ver 1.11 [ 4.336828] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.342669] Bluetooth: HIDP socket layer initialized [ 4.348709] 9pnet: Installing 9P2000 support [ 4.351975] Key type dns_resolver registered [ 4.357822] registered taskstats version 1 [ 4.360369] Loading compiled-in X.509 certificates [ 4.372355] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.376312] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.386873] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.388074] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.397015] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.405321] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.520742] tegra194-pcie 14160000.pcie: Link up [ 4.523613] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.523841] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.524001] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.524241] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.524464] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.524922] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.525353] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.538518] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.539105] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.539560] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.541120] pci 0004:01:00.0: supports D1 D2 [ 4.541301] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.549822] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.550306] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.550620] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.551021] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.551341] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.551541] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.555720] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.563013] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.571248] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.581812] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.586034] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.592116] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.598790] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.607495] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.609261] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.617931] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.626148] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.741935] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.742617] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.742830] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.743008] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.743272] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.743500] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.743866] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.744282] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.759790] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.760170] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.762122] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.763216] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.764794] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.766371] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.767160] pci 0005:00:00.0: Removing from iommu group 7 [ 5.767454] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.798324] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.820471] host1x 13e10000.host1x: initialized [ 5.822387] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.823382] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.824437] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.825369] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.826437] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.827188] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.828136] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.829056] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.835259] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.842037] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.851818] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.858903] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.869150] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.876072] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.886127] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.892877] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.902764] falcon 15340000.vic: Adding to iommu group 17 [ 5.916884] falcon 15340000.vic: initialized [ 5.917996] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.923706] falcon 15380000.nvjpg: initialized [ 5.924387] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.935870] falcon 154c0000.nvenc: initialized [ 5.936502] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.945759] falcon 15a80000.nvenc1: initialized [ 5.946344] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.958618] nvdec 15480000.nvdec: initialized [ 5.959347] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.968712] nvdec 15140000.nvdec1: initialized [ 5.969293] tsec 15500000.tsec: Adding to iommu group 18 [ 5.974559] tsec 15500000.tsec: initialized [ 5.975112] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.982800] tsec 15100000.tsecb: initialized [ 5.986387] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.011673] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.023581] gpio-374 (wifi-enable): hogged as output/high [ 6.023875] gpio-431 (camera-control-output-low): hogged as output/low [ 6.024174] gpio-432 (camera-control-output-low): hogged as output/low [ 6.025688] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.026932] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.027459] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.034400] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.039672] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.045359] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.050859] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.059241] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.066489] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.077895] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.083104] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.089028] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.097851] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.107109] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.114299] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.122161] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.128161] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.138040] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.144628] pva 16000000.pva0: Adding to iommu group 22 [ 6.171669] pva 16000000.pva0: initialized [ 6.177011] pva 16800000.pva1: Adding to iommu group 23 [ 6.195247] pva 16800000.pva1: initialized [ 6.199692] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.212557] nvdla 15880000.nvdla0: initialized [ 6.213877] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.222756] nvdla 158c0000.nvdla1: initialized [ 6.224869] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.225072] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.225391] tegradccommon 15200000.display-hub: dma mapping done [ 6.227149] tegradc 15200000.display: Adding to iommu group 26 [ 6.235451] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.235863] generic_infoframe_type: 0x87 [ 6.236103] tegradc 15200000.display: DT parsed successfully [ 6.236380] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.237627] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.238735] tegradc 15210000.display: Adding to iommu group 26 [ 6.240435] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.257855] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.258607] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.264139] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.269309] tegra_cec 3960000.tegra_cec: probed [ 6.269375] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.274772] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.282103] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.290208] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.296362] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.311189] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.311256] kfuse 3830000.kfuse: initialized [ 6.316940] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.328076] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.328545] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.344175] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.351714] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.352184] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.357907] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.373479] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.375082] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.382328] tegradc 15210000.display: disp0 connected to head1->sor [ 6.386786] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.392339] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.405868] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.408117] tegradc 15210000.display: DT parsed successfully [ 6.414815] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.419641] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.447715] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.448013] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.451346] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.459538] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.468033] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.474847] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.482447] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.489638] usb usb1: Product: xHCI Host Controller [ 6.494635] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.500934] usb usb1: SerialNumber: 3610000.xhci [ 6.507119] hub 1-0:1.0: USB hub found [ 6.509583] hub 1-0:1.0: 4 ports detected [ 6.514356] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.519116] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.526384] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.534143] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.541923] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.549395] usb usb2: Product: xHCI Host Controller [ 6.554126] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.560614] usb usb2: SerialNumber: 3610000.xhci [ 6.565960] hub 2-0:1.0: USB hub found [ 6.569091] hub 2-0:1.0: 4 ports detected [ 6.609395] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.614832] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.616006] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.616172] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.629187] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.630206] tegra194-cpufreq ccplex: probed with BWMGR [ 6.631448] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.632222] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.632745] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.634001] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.643935] tegra194-vi5 15c10000.vi: initialized [ 6.644459] mmc0: CQHCI version 5.10 [ 6.645230] tegradc 15210000.display: disp0 connected to head1->sor [ 6.646024] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.646266] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.652678] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.659036] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.667057] tegradc 15210000.display: DT parsed successfully [ 6.667070] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.674282] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.680766] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.686294] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.694270] generic_infoframe_type: 0x87 [ 6.700802] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.707393] tegradc 15200000.display: DT parsed successfully [ 6.720636] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.724330] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.727777] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.729760] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.744468] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.752193] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.758865] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.758876] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.768334] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.774355] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.790256] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.796599] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.797716] nvethernet 2490000.ethernet: Macsec not supported [ 6.799035] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.804392] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.811397] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.846736] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.847589] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.854374] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.861558] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.869760] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.886602] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.886893] ************************************** [ 6.891666] CPU:0, Error:cbb-noc [ 6.894820] Error Logger : 0 [ 6.898062] ErrLog0 : 0x80030000 [ 6.901743] Transaction Type : RD - Read, Incrementing [ 6.906982] Error Code : SLV [ 6.910564] Error Source : Target [ 6.914240] Error Description : Target error detected by CBB slave [ 6.920722] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.928331] Packet header Lock : 0 [ 6.931744] Packet header Len1 : 3 [ 6.935588] NOC protocol version : version >= 2.7 [ 6.940319] ErrLog1 : 0x352420 [ 6.943902] ErrLog2 : 0x0 [ 6.946789] RouteId : 0x352420 [ 6.950026] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.955015] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.959569] TargSubRange : 18 [ 6.963064] SeqId : 0 [ 6.965865] ErrLog3 : 0x4045c [ 6.968845] ErrLog4 : 0x0 [ 6.971748] Address accessed : 0x15b4045c [ 6.976278] ErrLog5 : 0x809f851 [ 6.979433] Non-Modify : 0x1 [ 6.982846] AXI ID : 0x10 [ 6.985995] Master ID : CCPLEX [ 6.989577] Security Group(GRPSEC): 0x7e [ 6.993520] Cache : 0x1 -- Bufferable [ 6.997720] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.004806] FALCONSEC : 0x0 [ 7.007696] Virtual Queuing Channel(VQC): 0x0 [ 7.012590] ************************************** [ 7.017369] ------------[ cut here ]------------ [ 7.022126] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.028693] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.033685] Modules linked in: [ 7.036938] CPU: 0 PID: 101 Comm: kworker/u12:2 Not tainted 5.10.104-tegra #1 [ 7.044089] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.056356] Workqueue: events_unbound async_run_entry_fn [ 7.061606] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.067639] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.072616] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.077339] sp : ffff800010003b30 [ 7.080414] x29: ffff800010003b30 x28: 0000000000000001 [ 7.086094] x27: 0000000000000005 x26: ffffa1a5d9543f58 [ 7.091535] x25: ffffa1a5d9e9ce10 x24: 0000000000000001 [ 7.096857] x23: ffffa1a5d9837000 x22: ffffa1a5d9cbea00 [ 7.102369] x21: 000000000000000f x20: ffff1baf00e65c80 [ 7.107553] x19: ffffa1a5d9cbea00 x18: 0000000000000010 [ 7.113148] x17: 0000000000006270 x16: 00000000ed7977b7 [ 7.118402] x15: ffff1baf01013f70 x14: 0720072007200720 [ 7.124189] x13: 0720072007200720 x12: 0720072007200720 [ 7.129257] x11: 0720072007200720 x10: 0720072007200720 [ 7.135024] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.140273] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.146042] x5 : 0000000000057fa8 x4 : ffffa1a5d9b47968 [ 7.151208] x3 : 00000000ffffffff x2 : ffffa1a5d7fde090 [ 7.156803] x1 : ffff1baf01013a00 x0 : 0000000100010100 [ 7.161883] Call trace: [ 7.164581] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.168883] __handle_irq_event_percpu+0x68/0x2a0 [ 7.173336] handle_irq_event_percpu+0x40/0xa0 [ 7.177639] handle_irq_event+0x50/0xf0 [ 7.181645] handle_fasteoi_irq+0xc0/0x170 [ 7.185671] generic_handle_irq+0x40/0x60 [ 7.189436] __handle_domain_irq+0x70/0xd0 [ 7.193638] efi_header_end+0xb0/0xf0 [ 7.197391] el1_irq+0xd0/0x180 [ 7.200367] __do_softirq+0xb4/0x3e8 [ 7.204044] irq_exit+0xc0/0xe0 [ 7.207016] __handle_domain_irq+0x74/0xd0 [ 7.211041] efi_header_end+0xb0/0xf0 [ 7.214716] el1_irq+0xd0/0x180 [ 7.217696] tegra_hda_get_dev_id+0x6c/0x2b0 [ 7.221979] tegra_hda_init+0x234/0x440 [ 7.225661] tegra_dc_hdmi_init+0x820/0xb50 [ 7.229510] tegra_dc_set_out+0x2cc/0x480 [ 7.233622] tegra_dc_probe+0xa90/0x1570 [ 7.237562] platform_drv_probe+0x5c/0xb0 [ 7.242020] really_probe+0xf8/0x3d0 [ 7.245696] driver_probe_device+0x60/0xc0 [ 7.249548] __device_attach_driver+0x8c/0xd0 [ 7.254179] bus_for_each_drv+0x8c/0xe0 [ 7.257686] __device_attach_async_helper+0xc4/0xf0 [ 7.262842] async_run_entry_fn+0x4c/0x150 [ 7.267044] process_one_work+0x1c4/0x4a0 [ 7.271169] worker_thread+0x54/0x430 [ 7.274829] kthread+0x148/0x170 [ 7.277898] ret_from_fork+0x10/0x24 [ 7.281580] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.287962] ---[ end trace 079ab0bc21f9bee5 ]--- [ 7.292595] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.300041] SMP: stopping secondary CPUs [ 7.303986] Kernel Offset: 0x21a5c7e20000 from 0xffff800010000000 [ 7.310088] PHYS_OFFSET: 0xffffe45200000000 [ 7.314210] CPU features: 0x8240002,03802a30 [ 7.318577] Memory Limit: none [ 7.321387] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.030] > DEVICE_PROD: device prod is not initialized. [0002.335] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.336] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.337] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.337] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.338] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.338] I> dram_block larger than 80000000 [0002.340] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.352] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.355] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.585] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized noc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 202ÿâavfs_clk_platform_post initialized ÿä2 aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.204] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.205] I> 0) Base:0x00000000 Size:0x00000000 [0003.205] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.206] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.213] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.222] I> 7) Base:0xc9000000 Size:0x00400000 [0003.226] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.235] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.244] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.253] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.262] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.271] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.280] I> 20) Base:0x4004e000 Size:0x00002000 [0003.284] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.293] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.302] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.311] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.320] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.329] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.338] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.351] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.360] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.369] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.378] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.387] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.396] GIC-SPI Target CPU: 0 [0003.399] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.407] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.417] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.424] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.429] initializing platform [0003.432] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.441] I> Bl_dtb @0xadf00000 [0003.444] I> gpio framework initialized [0003.455] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.466] I> fixed regulator driver initialized [0003.479] I> register 'maxim' power off handle [0003.482] I> virtual i2c enabled [0003.482] I> registered 'maxim,max20024' pmic [0003.483] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.486] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.493] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.519] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.530] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.538] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.545] E> Failed to get board id info! [0003.551] I> sdmmc-3 params source = safe params [0003.558] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.564] E> Failed to publish 00000003 [0003.569] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.612] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.622] E> cannot find any other nvdisp nodes [0003.639] I> edid read success [0003.651] I> edid read success [0003.651] I> width = 640, height = 480, frequency = 25174825 [0003.652] I> width = 1920, height = 1080, frequency = 148500000 [0003.652] I> width = 1280, height = 768, frequency = 79500000 [0003.653] I> width = 1360, height = 768, frequency = 85500000 [0003.653] I> width = 720, height = 480, frequency = 26973026 [0003.657] I> width = 720, height = 576, frequency = 26973026 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.685] I> width = 720, height = 480, frequency = 26973026 [0003.691] I> width = 720, height = 576, frequency = 26973026 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.719] I> width = 4096, height = 2160, frequency = 296703296 [0003.725] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.736] I> hdmi_enable, starting HDMI initialisation [0003.741] I> hdmi_enable, HDMI initialisation complete [0003.751] initializing target [0003.752] calling apps_init() [0003.752] starting app kernel_boot_app [0003.753] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000790] Console: colour dummy device 80x25 [ 0.002176] printk: console [tty0] enabled [ 0.002287] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002342] pid_max: default: 32768 minimum: 301 [ 0.002515] LSM: Security Framework initializing [ 0.002634] Yama: becoming mindful. [ 0.002694] SELinux: Initializing. [ 0.002866] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002904] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006014] rcu: Hierarchical SRCU implementation. [ 0.006258] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007067] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007145] DTB Build time: Aug 10 2022 20:31:49 [ 0.010386] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010630] Remapping and enabling EFI services. [ 0.013051] smp: Bringing up secondary CPUs ... [ 0.042575] Detected PIPT I-cache on CPU1 [ 0.042650] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075172] Detected PIPT I-cache on CPU2 [ 0.075321] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104941] Detected PIPT I-cache on CPU3 [ 0.105083] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134810] Detected PIPT I-cache on CPU4 [ 0.134908] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164545] Detected PIPT I-cache on CPU5 [ 0.164687] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165075] smp: Brought up 1 node, 6 CPUs [ 0.165339] SMP: Total of 6 processors activated. [ 0.165398] CPU features: detected: Privileged Access Never [ 0.165442] CPU features: detected: LSE atomic instructions [ 0.165457] CPU features: detected: User Access Override [ 0.165472] CPU features: detected: 32-bit EL0 Support [ 0.165486] CPU features: detected: RAS Extension Support [ 0.165500] CPU features: detected: CRC32 instructions [ 0.165514] CPU features: detected: 32-bit EL1 Support [ 0.238565] CPU: All CPU(s) started at EL2 [ 0.243812] devtmpfs: initialized [ 0.291550] Registered cp15_barrier emulation handler [ 0.291651] Registered setend emulation handler [ 0.291671] KASLR enabled [ 0.291957] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291985] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293064] pinctrl core: initialized pinctrl subsystem [ 0.294075] SMBIOS 3.0.0 present. [ 0.294105] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294744] NET: Registered protocol family 16 [ 0.296553] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.297042] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297710] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297793] audit: initializing netlink subsys (disabled) [ 0.298011] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.298455] thermal_sys: Registered thermal governor 'step_wise' [ 0.298461] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298475] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300800] cpuidle: using governor menu [ 0.301135] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.301640] ASID allocator initialised with 32768 entries [ 0.301922] Serial: AMBA PL011 UART driver [ 0.305918] Tegra reboot handler registered. [ 0.383161] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.383354] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.383540] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.383600] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.383734] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.383794] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.383926] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.383982] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.384131] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.384185] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.386812] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.386850] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.386882] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.386915] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.386950] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.386981] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.387022] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.387067] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.387095] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.387123] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.387151] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.387179] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.387206] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.387234] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.387281] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.387314] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.387343] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.387442] mc-err: mcerr ops are set to t19x [ 0.401504] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.401531] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.401544] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.401556] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.409672] ACPI: Interpreter disabled. [ 0.411705] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.413671] iommu: Default domain type: Translated [ 0.413786] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.414354] SCSI subsystem initialized [ 0.414607] usbcore: registered new interface driver usbfs [ 0.414711] usbcore: registered new interface driver hub [ 0.414792] usbcore: registered new device driver usb [ 0.415476] mc: Linux media interface: v0.10 [ 0.415556] videodev: Linux video capture interface: v2.00 [ 0.416017] pps_core: LinuxPPS API ver. 1 registered [ 0.416034] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.416065] PTP clock support registered [ 0.416407] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.416776] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.416905] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.417950] Registered efivars operations [ 0.427353] FPGA manager framework [ 0.427531] Advanced Linux Sound Architecture Driver Initialized. [ 0.428357] Bluetooth: Core ver 2.22 [ 0.428417] NET: Registered protocol family 31 [ 0.428438] Bluetooth: HCI device and connection manager initialized [ 0.428460] Bluetooth: HCI socket layer initialized [ 0.428478] Bluetooth: L2CAP socket layer initialized [ 0.428507] Bluetooth: SCO socket layer initialized [ 0.430606] camchar: rtcpu character device driver loaded [ 0.431891] clocksource: Switched to clocksource arch_sys_counter [ 0.849505] VFS: Disk quotas dquot_6.6.0 [ 0.849597] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.850161] pnp: PnP ACPI: disabled [ 0.864161] la/ptsa driver initialized. [ 0.864308] NET: Registered protocol family 2 [ 0.864549] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.872754] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.872924] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.873288] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.873921] TCP: Hash tables configured (established 65536 bind 65536) [ 0.874080] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.874217] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.874541] NET: Registered protocol family 1 [ 0.875609] RPC: Registered named UNIX socket transport module. [ 0.875644] RPC: Registered udp transport module. [ 0.875665] RPC: Registered tcp transport module. [ 0.875684] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.875745] PCI: CLS 0 bytes, default 64 [ 0.876145] Trying to unpack rootfs image as initramfs... [ 1.135391] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.138626] Freeing initrd memory: 8196K [ 1.143390] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.143423] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.143487] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.143947] kvm [1]: IPA Size Limit: 40 bits [ 1.144529] kvm [1]: vgic interrupt IRQ9 [ 1.145101] kvm [1]: VHE mode initialized successfully [ 1.146988] Initialise system trusted keyrings [ 1.147355] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.154165] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.155010] NFS: Registering the id_resolver key type [ 1.155074] Key type id_resolver registered [ 1.155089] Key type id_legacy registered [ 1.155208] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.155231] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.155271] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.165689] NET: Registered protocol family 38 [ 1.165710] Key type asymmetric registered [ 1.165724] Asymmetric key parser 'x509' registered [ 1.165774] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.165995] io scheduler mq-deadline registered [ 1.166012] io scheduler kyber registered [ 1.172020] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.175103] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.175184] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.175256] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.175355] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.175451] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.181648] scrncapt: init (heads:4 wins:6 planes:4) [ 1.181882] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.182994] EINJ: ACPI disabled. [ 1.186621] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.186676] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.186690] tegra-pmc: ### PMC reset level: L1 [ 1.186704] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.186784] tegra-pmc: PMC Prod config success [ 1.192318] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.198311] random: fast init done [ 1.198862] printk: console [ttyTCU0] enabled [ 2.750145] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.754806] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.759367] arm-smmu 10000000.iommu: stage 1 translation [ 2.764754] arm-smmu 10000000.iommu: stage 2 translation [ 2.770358] arm-smmu 10000000.iommu: nested translation [ 2.775431] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.782609] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.793508] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.796249] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.802554] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.810630] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.815593] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.820356] arm-smmu 12000000.iommu: stage 1 translation [ 2.826109] arm-smmu 12000000.iommu: stage 2 translation [ 2.831509] arm-smmu 12000000.iommu: nested translation [ 2.836685] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.843858] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.854464] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.856980] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.863539] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.871256] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.881122] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.884201] tegra_profiler: auth: init [ 2.888312] THERMAL EST: found 3 subdevs [ 2.891892] THERMAL EST num_resources: 0 [ 2.895461] [THERMAL EST subdev 0] [ 2.898813] [THERMAL EST subdev 1] [ 2.902494] [THERMAL EST subdev 2] [ 2.905463] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.911949] THERMAL EST: thz register success. [ 2.916155] THERMAL EST: end of probe, return err: 0 [ 2.921539] nvsciipc: loaded module [ 2.928676] tun: Universal TUN/TAP device driver, 1.6 [ 2.931101] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.937224] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.943037] e1000e: Intel(R) PRO/1000 Network Driver [ 2.947972] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.953788] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.959345] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.965281] PPP generic driver version 2.4.2 [ 2.969783] PPP BSD Compression module registered [ 2.974069] PPP Deflate Compression module registered [ 2.979316] PPP MPPE Compression module registered [ 2.984584] usbcore: registered new interface driver r8152 [ 2.990122] usbcore: registered new interface driver asix [ 2.995171] usbcore: registered new interface driver ax88179_178a [ 3.001290] usbcore: registered new interface driver cdc_ether [ 3.007244] usbcore: registered new interface driver net1080 [ 3.012842] usbcore: registered new interface driver cdc_subset [ 3.018887] usbcore: registered new interface driver zaurus [ 3.024584] usbcore: registered new interface driver cdc_ncm [ 3.030263] usbcore: registered new interface driver aqc111 [ 3.036145] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.041969] ohci-pci: OHCI PCI platform driver [ 3.046532] ohci-platform: OHCI generic platform driver [ 3.052405] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.058689] usbcore: registered new interface driver uas [ 3.062828] usbcore: registered new interface driver usb-storage [ 3.068979] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.074955] mousedev: PS/2 mouse device common for all mice [ 3.079754] usbcore: registered new interface driver xpad [ 3.087967] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.090707] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.098512] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.105088] i2c /dev entries driver [ 3.108399] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.113972] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.119465] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.124886] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.130252] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.135773] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.141167] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.154367] device-mapper: uevent: version 1.0.3 [ 3.154791] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.161686] cpuidle: Initializing cpuidle driver [ 3.165321] sdhci: Secure Digital Host Controller Interface driver [ 3.170087] sdhci: Copyright(c) Pierre Ossman [ 3.174420] Synopsys Designware Multimedia Card Interface Driver [ 3.180368] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.186354] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.187149] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.199538] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.222315] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.231595] vdd-1v0: supplied by regulator-dummy [ 3.237118] vdd-1v8-hs: supplied by regulator-dummy [ 3.241954] vdd-1v8-ls: supplied by regulator-dummy [ 3.246889] vdd-1v8-ao: supplied by regulator-dummy [ 3.250871] vddio-ddr-1v1: supplied by regulator-dummy [ 3.255567] vdd-rtc: supplied by regulator-dummy [ 3.257323] spmic-ldo1: supplied by regulator-dummy [ 3.258619] vdd-ao-3v3: supplied by regulator-dummy [ 3.264910] vddio-emmc-3v3: supplied by regulator-dummy [ 3.271182] spmic-ldo4: supplied by regulator-dummy [ 3.272552] vdd-usb-3v3: supplied by regulator-dummy [ 3.278791] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.285072] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.290757] spmic-ldo8: supplied by vdd-1v8-ls [ 3.292255] gpio-510 (gpio_default): hogged as output/high [ 3.293709] gpio-511 (gpio_default): hogged as output/high [ 3.296650] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.432806] max77686-rtc max77620-rtc: registered as rtc0 [ 3.434183] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.434542] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.266274] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.267617] hid: raw HID events driver (C) Jiri Kosina [ 4.268382] usbcore: registered new interface driver usbhid [ 4.268516] usbhid: USB HID core driver [ 4.270604] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.271682] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.257453] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.332249] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 75.607 ms) ÿá[ 4.356438] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.357022] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.358062] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.358883] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.360796] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.361399] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.361968] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.363042] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.363328] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.365108] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.372629] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.379121] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.384252] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.390427] denver_knobs_init:MTS_VERSION:55637613 [ 4.403528] t19x_cache tegra-cache: probed [ 4.406629] optee: probing for conduit method. [ 4.407523] optee: revision 3.16 (65cc2218) [ 4.408659] optee: dynamic shared memory is enabled [ 4.411230] optee: initialized driver [ 4.417706] nvpmodel: initialized successfully [ 4.418574] tegra_hv: get_hvd: not initialized yet [ 4.423344] user_ivc_mempool: hypervisor not present [ 4.429593] usbcore: registered new interface driver snd-usb-audio [ 4.436056] u32 classifier [ 4.437354] input device check on [ 4.441217] Actions configured [ 4.444491] Initializing XFRM netlink socket [ 4.449371] NET: Registered protocol family 10 [ 4.455742] Segment Routing with IPv6 [ 4.456773] NET: Registered protocol family 17 [ 4.461256] NET: Registered protocol family 15 [ 4.465418] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.479222] Bluetooth: RFCOMM socket layer initialized [ 4.483946] Bluetooth: RFCOMM ver 1.11 [ 4.487534] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.493669] Bluetooth: HIDP socket layer initialized [ 4.499123] 9pnet: Installing 9P2000 support [ 4.502872] Key type dns_resolver registered [ 4.508436] registered taskstats version 1 [ 4.511539] Loading compiled-in X.509 certificates [ 4.523256] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.527314] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.537804] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.539187] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.548041] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.556292] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.671922] tegra194-pcie 14160000.pcie: Link up [ 4.674674] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.674943] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.675112] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.675339] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.675528] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.675974] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.676410] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.689402] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.689893] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.690442] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.692010] pci 0004:01:00.0: supports D1 D2 [ 4.692187] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.701118] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.701498] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.701745] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.702206] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.702485] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.702664] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.706844] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.714140] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.722399] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.732818] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.737534] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.743064] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.749685] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.758505] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.760372] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.769080] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.777281] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.880045] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.880622] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.880891] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.881068] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.881369] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.881562] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.881905] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.882309] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.901465] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.901778] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.903691] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.905597] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.907017] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.908466] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.909459] pci 0005:00:00.0: Removing from iommu group 7 [ 5.909718] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.940586] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.961313] host1x 13e10000.host1x: initialized [ 5.962921] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.963836] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.965218] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.965986] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.967060] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.967818] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.968918] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.969547] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.973424] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.980294] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.990515] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.997315] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.007361] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.014203] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.024244] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.031011] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.040876] falcon 15340000.vic: Adding to iommu group 17 [ 6.055602] falcon 15340000.vic: initialized [ 6.056456] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.061796] falcon 15380000.nvjpg: initialized [ 6.062398] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.073894] falcon 154c0000.nvenc: initialized [ 6.074500] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.083664] falcon 15a80000.nvenc1: initialized [ 6.084280] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.095619] nvdec 15480000.nvdec: initialized [ 6.096521] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.106426] nvdec 15140000.nvdec1: initialized [ 6.107046] tsec 15500000.tsec: Adding to iommu group 18 [ 6.112505] tsec 15500000.tsec: initialized [ 6.113120] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.120704] tsec 15100000.tsecb: initialized [ 6.124331] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.151488] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.165623] gpio-374 (wifi-enable): hogged as output/high [ 6.165944] gpio-431 (camera-control-output-low): hogged as output/low [ 6.166241] gpio-432 (camera-control-output-low): hogged as output/low [ 6.167820] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.169472] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.169995] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.172286] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.177983] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.183444] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.189069] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.197300] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.204683] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.216239] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.221099] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.227088] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.235929] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.245543] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.252757] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.260488] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.266632] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.276143] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.282260] pva 16000000.pva0: Adding to iommu group 22 [ 6.309520] pva 16000000.pva0: initialized [ 6.314952] pva 16800000.pva1: Adding to iommu group 23 [ 6.326109] pva 16800000.pva1: initialized [ 6.330790] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.350962] nvdla 15880000.nvdla0: initialized [ 6.352526] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.362249] nvdla 158c0000.nvdla1: initialized [ 6.366327] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.366401] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.366673] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.366793] tegradc 15200000.display: Adding to iommu group 26 [ 6.367059] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.367310] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.367657] tegradccommon 15200000.display-hub: dma mapping done [ 6.368795] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.371706] tegra_cec 3960000.tegra_cec: probed [ 6.375821] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.376146] tegradc 15210000.display: Adding to iommu group 26 [ 6.377264] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.382960] generic_infoframe_type: 0x87 [ 6.388779] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.394278] tegradc 15200000.display: DT parsed successfully [ 6.399726] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.404047] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.408173] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.410379] kfuse 3830000.kfuse: initialized [ 6.416368] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.425373] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.433016] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.433909] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.437241] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.437777] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.445358] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.446402] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.466161] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.475416] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.479756] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.485423] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.511139] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.520419] tegradc 15210000.display: disp0 connected to head1->sor [ 6.525629] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.533387] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.539971] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.541231] random: crng init done [ 6.545887] tegradc 15210000.display: DT parsed successfully [ 6.564186] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.564566] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.570380] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.593396] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.601362] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.610034] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.616978] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.624434] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.631502] usb usb1: Product: xHCI Host Controller [ 6.636632] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.642928] usb usb1: SerialNumber: 3610000.xhci [ 6.648846] hub 1-0:1.0: USB hub found [ 6.651481] hub 1-0:1.0: 4 ports detected [ 6.656220] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.660742] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.668592] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.676416] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.684224] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.691413] usb usb2: Product: xHCI Host Controller [ 6.696122] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.702333] usb usb2: SerialNumber: 3610000.xhci [ 6.708166] hub 2-0:1.0: USB hub found [ 6.711048] hub 2-0:1.0: 4 ports detected [ 6.750179] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.756489] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.757775] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.757975] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.770703] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.771804] tegra194-cpufreq ccplex: probed with BWMGR [ 6.773093] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.773504] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.773917] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.775247] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.784505] mmc0: CQHCI version 5.10 [ 6.786058] tegra194-vi5 15c10000.vi: initialized [ 6.789769] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.790948] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.794946] generic_infoframe_type: 0x87 [ 6.801489] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.804869] tegradc 15200000.display: DT parsed successfully [ 6.813196] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.813208] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.818762] tegradc 15200000.display: Display dc.0000000062bcab9e registered with id=0 [ 6.825076] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.832966] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.839800] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.846165] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.847977] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.854748] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.854752] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.855152] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.860884] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.860895] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.868585] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.876699] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.883821] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.898623] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.904539] nvethernet 2490000.ethernet: Macsec not supported [ 6.905906] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.911192] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.913187] tegradc 15200000.display: probed [ 6.919014] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.927923] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.933516] mmc0: Command Queue Engine enabled [ 6.933521] mmc0: periodic cache flush enabled [ 6.933538] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.934234] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.934462] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.936121] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.939175] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.024513] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.024664] Console: switching to colour frame buffer device 240x67 [ 7.025895] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.030826] tegradc 15200000.display: fb registered [ 7.030899] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.038760] tegra-se-nvhost 15810000.se: initialized [ 7.044041] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.053468] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.054309] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.059382] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.083990] tegra-se-nvhost 15820000.se: initialized [ 7.089751] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.095073] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.101258] tegra-se-nvhost 15830000.se: initialized [ 7.106642] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.111573] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.112418] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.119289] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.120227] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.120233] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.120446] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.120454] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.121067] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.121070] Extcon AUX1(HDMI) enable [ 7.121191] tegradc 15210000.display: disp1 connected to head1->sor [ 7.121358] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.121445] tegradc 15210000.display: DT parsed successfully [ 7.121482] tegradc 15210000.display: Display dc.00000000b97dc4f9 registered with id=1 [ 7.121602] tegradc 15210000.display: vblank syncpt # 16 for dc 1 [ 7.121607] tegradc 15210000.display: vpulse3 syncpt # 17 for dc 1 [ 7.127261] tegra-se-nvhost 15840000.se: initialized [ 7.135519] usb 1-2: Manufacturer: Generic [ 7.143762] tegradc 15210000.display: probed [ 7.144101] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.145601] tegra_actmon d230000.actmon: in actmon_register()... [ 7.145776] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.146175] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.146734] hvc_sysfs: hypervisor is not present [ 7.149214] hub 1-2:1.0: USB hub found [ 7.173464] ALSA device list: [ 7.181033] hub 1-2:1.0: 4 ports detected [ 7.186643] No soundcards found. [ 7.271371] tegradc 15210000.display: fb registered [ 7.272282] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.274740] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.274745] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.274752] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.304111] tegradc 15200000.display: blank - powerdown [ 7.341548] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.341553] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.341557] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.341577] usb 2-3: Manufacturer: Generic [ 7.352189] hub 2-3:1.0: USB hub found [ 7.353015] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.353019] Extcon AUX1(HDMI) disable [ 7.353988] hub 2-3:1.0: 4 ports detected [ 7.376324] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.377205] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.389230] tegradc 15200000.display: unblank [ 7.390291] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.390478] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.396465] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.398332] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.402494] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.402497] Extcon AUX1(HDMI) enable [ 7.415103] tegradc 15200000.display: sync windows ret = 247 [ 7.427942] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.448214] tegradc 15210000.display: blank - powerdown [ 7.449623] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.449627] Extcon DP: HPD disabled [ 7.449631] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.449643] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.449649] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.459920] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.465683] Freeing unused kernel memory: 3968K [ 7.489522] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.489587] Run /init as init process [ 7.496360] Extcon HDMI: HPD enabled [ 7.500767] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.500773] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.503857] tegradc 15200000.display: hdmi: plugged [ 7.577148] Root device found: mmcblk0p1 [ 7.580600] Found dev node: /dev/mmcblk0p1 [ 7.616752] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.621163] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.622554] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.623906] usb 1-3: Product: Bluetooth Radio [ 7.625219] usb 1-3: Manufacturer: Realtek [ 7.625345] Rootfs mounted over mmcblk0p1 [ 7.626490] usb 1-3: SerialNumber: 00e04c000001 [ 7.671716] Switching from initrd to actual rootfs [ 7.828968] systemd[1]: System time before build time, advancing clock. [ 7.906023] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.910825] systemd[1]: Detected architecture arm64. [ 7.962180] systemd[1]: Set hostname to . [ 8.123833] systemd-sysv-generator[242]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.479474] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.481266] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.487003] systemd[1]: Created slice system-modprobe.slice. [ 8.491822] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.496143] systemd[1]: Created slice User and Session Slice. [ 8.499608] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.503750] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.507184] systemd[1]: Reached target User and Group Name Lookups. [ 8.510644] systemd[1]: Reached target Slices. [ 8.513818] systemd[1]: Reached target Swap. [ 8.517986] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.521736] systemd[1]: Listening on Syslog Socket. [ 8.525432] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.528876] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.533171] systemd[1]: Listening on Journal Audit Socket. [ 8.536819] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.540706] systemd[1]: Listening on Journal Socket. [ 8.544471] systemd[1]: Listening on udev Control Socket. [ 8.548088] systemd[1]: Listening on udev Kernel Socket. [ 8.556345] systemd[1]: Mounting Huge Pages File System... [ 8.567652] systemd[1]: Mounting POSIX Message Queue File System... [ 8.575808] systemd[1]: Mounting RPC Pipe File System... [ 8.584511] systemd[1]: Mounting Kernel Debug File System... [ 8.593258] systemd[1]: Mounting Kernel Trace File System... [ 8.603694] systemd[1]: Starting Journal Service... [ 8.612938] systemd[1]: Starting Set the console keyboard layout... [ 8.621445] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.626027] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.632559] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.640606] systemd[1]: Started Nameserver information manager. [ 8.645312] systemd[1]: Reached target Network (Pre). [ 8.652299] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.654116] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.660975] systemd[1]: Starting Load Kernel Modules... [ 8.669154] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.678178] systemd[1]: Starting udev Coldplug all Devices... [ 8.688165] systemd[1]: Mounted Huge Pages File System. [ 8.691862] systemd[1]: Mounted POSIX Message Queue File System. [ 8.695553] systemd[1]: Mounted RPC Pipe File System. [ 8.698715] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.699126] systemd[1]: Mounted Kernel Debug File System. [ 8.706623] systemd[1]: Mounted Kernel Trace File System. [ 8.706767] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.710128] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.710133] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.710141] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.710144] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.710777] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.710969] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.720513] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.722079] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.723682] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.740456] systemd[1]: nvfb-udev.service: Succeeded. [ 8.745353] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.756780] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.768750] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.770555] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.777337] systemd[1]: Starting Load/Save Random Seed... [ 8.786586] systemd[1]: Starting Create System Users... [ 8.821306] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.821306] [ 8.834969] systemd[1]: Finished Load/Save Random Seed. [ 8.849885] systemd[1]: Finished Create System Users. [ 8.856541] systemd[1]: Finished Load Kernel Modules. [ 8.860963] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.867498] systemd[1]: Mounting Kernel Configuration File System... [ 8.875754] systemd[1]: Started OP-TEE Client Supplicant. [ 8.883941] systemd[1]: Starting Apply Kernel Variables... [ 8.892071] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.902268] systemd[1]: Finished Set the console keyboard layout. [ 8.906845] systemd[1]: Mounted Kernel Configuration File System. [ 10.356489] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.363054] imx219 9-0010: board setup failed [ 10.363162] imx219: probe of 9-0010 failed with error -121 [ 10.374128] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.379625] imx219 10-0010: board setup failed [ 10.379726] imx219: probe of 10-0010 failed with error -121 [ 10.583283] hot-surface-alert cooling state: 0 -> 1 [ 11.109406] using random self ethernet address [ 11.110644] using random host ethernet address [ 12.103059] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.105011] Creating 1 MTD partitions on "spi6.0": [ 12.106719] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.566411] using random self ethernet address [ 12.566418] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.891521] nvidia: loading out-of-tree module taints kernel. [ 59.689389] watchdog: watchdog0: watchdog did not stop! [ 60.141606] Trying to unregister non-registered hwtime source [ 63.207031] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.208640] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR]àÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 66000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.418] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.645] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.647] I> width = 720, height = 480, frequency = 26973026 [0003.651] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.745] initializing target [0003.745] calling apps_init() [0003.746] starting app kernel_boot_app [0003.747] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000090974000-0x00000000a0974000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000734] Console: colour dummy device 80x25 [ 0.002280] printk: console [tty0] enabled [ 0.002344] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002396] pid_max: default: 32768 minimum: 301 [ 0.002595] LSM: Security Framework initializing [ 0.002652] Yama: becoming mindful. [ 0.002693] SELinux: Initializing. [ 0.002850] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002887] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005822] rcu: Hierarchical SRCU implementation. [ 0.006077] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006888] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006937] DTB Build time: Aug 10 2022 20:31:49 [ 0.009919] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010203] Remapping and enabling EFI services. [ 0.012529] smp: Bringing up secondary CPUs ... [ 0.041625] Detected PIPT I-cache on CPU1 [ 0.041737] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075358] Detected PIPT I-cache on CPU2 [ 0.075504] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105081] Detected PIPT I-cache on CPU3 [ 0.105217] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134922] Detected PIPT I-cache on CPU4 [ 0.135130] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165431] Detected PIPT I-cache on CPU5 [ 0.165619] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.165983] smp: Brought up 1 node, 6 CPUs [ 0.166230] SMP: Total of 6 processors activated. [ 0.166267] CPU features: detected: Privileged Access Never [ 0.166280] CPU features: detected: LSE atomic instructions [ 0.166292] CPU features: detected: User Access Override [ 0.166306] CPU features: detected: 32-bit EL0 Support [ 0.166320] CPU features: detected: RAS Extension Support [ 0.166332] CPU features: detected: CRC32 instructions [ 0.166346] CPU features: detected: 32-bit EL1 Support [ 0.234395] CPU: All CPU(s) started at EL2 [ 0.241180] devtmpfs: initialized [ 0.287264] Registered cp15_barrier emulation handler [ 0.287345] Registered setend emulation handler [ 0.287364] KASLR enabled [ 0.287667] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287695] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289874] pinctrl core: initialized pinctrl subsystem [ 0.290912] SMBIOS 3.0.0 present. [ 0.290964] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291601] NET: Registered protocol family 16 [ 0.293575] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.294134] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294956] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295010] audit: initializing netlink subsys (disabled) [ 0.295264] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.295674] thermal_sys: Registered thermal governor 'step_wise' [ 0.295681] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295695] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.297900] cpuidle: using governor menu [ 0.298169] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.298630] ASID allocator initialised with 32768 entries [ 0.298857] Serial: AMBA PL011 UART driver [ 0.301812] Tegra reboot handler registered. [ 0.378771] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.378948] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.379126] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.379176] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.379338] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.379387] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.379501] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.379545] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.379660] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.379703] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.381895] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.381931] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.381960] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.381988] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.382019] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.382050] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.382090] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.382123] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.382149] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.382174] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.382198] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.382222] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.382247] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.382295] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.382321] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.382345] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.382370] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.382486] mc-err: mcerr ops are set to t19x [ 0.394677] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.394701] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.394714] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.394726] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.401820] ACPI: Interpreter disabled. [ 0.403046] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.404253] iommu: Default domain type: Translated [ 0.404327] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.404679] SCSI subsystem initialized [ 0.404830] usbcore: registered new interface driver usbfs [ 0.404875] usbcore: registered new interface driver hub [ 0.404922] usbcore: registered new device driver usb [ 0.405286] mc: Linux media interface: v0.10 [ 0.405329] videodev: Linux video capture interface: v2.00 [ 0.405633] pps_core: LinuxPPS API ver. 1 registered [ 0.405670] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.405700] PTP clock support registered [ 0.405887] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.406233] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.406327] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.406928] Registered efivars operations [ 0.412561] FPGA manager framework [ 0.412661] Advanced Linux Sound Architecture Driver Initialized. [ 0.413242] Bluetooth: Core ver 2.22 [ 0.413279] NET: Registered protocol family 31 [ 0.413291] Bluetooth: HCI device and connection manager initialized [ 0.413308] Bluetooth: HCI socket layer initialized [ 0.413321] Bluetooth: L2CAP socket layer initialized [ 0.413340] Bluetooth: SCO socket layer initialized [ 0.414784] camchar: rtcpu character device driver loaded [ 0.415502] clocksource: Switched to clocksource arch_sys_counter [ 0.834034] VFS: Disk quotas dquot_6.6.0 [ 0.834136] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.834537] pnp: PnP ACPI: disabled [ 0.850441] la/ptsa driver initialized. [ 0.850600] NET: Registered protocol family 2 [ 0.850867] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.858481] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.858686] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.859042] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.859746] TCP: Hash tables configured (established 65536 bind 65536) [ 0.859943] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.860103] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.860362] NET: Registered protocol family 1 [ 0.861217] RPC: Registered named UNIX socket transport module. [ 0.861238] RPC: Registered udp transport module. [ 0.861252] RPC: Registered tcp transport module. [ 0.861265] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.861285] PCI: CLS 0 bytes, default 64 [ 0.861555] Trying to unpack rootfs image as initramfs... [ 1.122302] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.125606] Freeing initrd memory: 8196K [ 1.130056] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.130093] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.130129] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.130504] kvm [1]: IPA Size Limit: 40 bits [ 1.131009] kvm [1]: vgic interrupt IRQ9 [ 1.131547] kvm [1]: VHE mode initialized successfully [ 1.133090] Initialise system trusted keyrings [ 1.133391] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.138810] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.139761] NFS: Registering the id_resolver key type [ 1.139817] Key type id_resolver registered [ 1.139851] Key type id_legacy registered [ 1.139950] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.139990] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.140046] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.150126] NET: Registered protocol family 38 [ 1.150151] Key type asymmetric registered [ 1.150197] Asymmetric key parser 'x509' registered [ 1.150244] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.150509] io scheduler mq-deadline registered [ 1.150531] io scheduler kyber registered [ 1.156697] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.159861] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.159940] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.160010] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.160083] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.160152] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.166506] scrncapt: init (heads:4 wins:6 planes:4) [ 1.166774] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.167741] EINJ: ACPI disabled. [ 1.171032] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.171057] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.171102] tegra-pmc: ### PMC reset level: L1 [ 1.171116] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.171175] tegra-pmc: PMC Prod config success [ 1.176200] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.183625] random: fast init done [ 1.193036] printk: console [ttyTCU0] enabled [ 2.733597] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.738255] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.742871] arm-smmu 10000000.iommu: stage 1 translation [ 2.748381] arm-smmu 10000000.iommu: stage 2 translation [ 2.753585] arm-smmu 10000000.iommu: nested translation [ 2.759201] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.766102] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.775798] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.779186] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.785770] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.793455] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.799054] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.803792] arm-smmu 12000000.iommu: stage 1 translation [ 2.809031] arm-smmu 12000000.iommu: stage 2 translation [ 2.814712] arm-smmu 12000000.iommu: nested translation [ 2.820144] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.827323] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.836409] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.840442] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.846777] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.854338] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.864203] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.867208] tegra_profiler: auth: init [ 2.871403] THERMAL EST: found 3 subdevs [ 2.875104] THERMAL EST num_resources: 0 [ 2.878687] [THERMAL EST subdev 0] [ 2.882264] [THERMAL EST subdev 1] [ 2.885426] [THERMAL EST subdev 2] [ 2.888920] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.895031] THERMAL EST: thz register success. [ 2.899360] THERMAL EST: end of probe, return err: 0 [ 2.904614] nvsciipc: loaded module [ 2.911252] tun: Universal TUN/TAP device driver, 1.6 [ 2.914214] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.920695] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.926001] e1000e: Intel(R) PRO/1000 Network Driver [ 2.930946] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.936985] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.942293] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.948618] PPP generic driver version 2.4.2 [ 2.952965] PPP BSD Compression module registered [ 2.957528] PPP Deflate Compression module registered [ 2.962775] PPP MPPE Compression module registered [ 2.967801] usbcore: registered new interface driver r8152 [ 2.973030] usbcore: registered new interface driver asix [ 2.978626] usbcore: registered new interface driver ax88179_178a [ 2.984745] usbcore: registered new interface driver cdc_ether [ 2.990702] usbcore: registered new interface driver net1080 [ 2.996316] usbcore: registered new interface driver cdc_subset [ 3.002360] usbcore: registered new interface driver zaurus [ 3.008042] usbcore: registered new interface driver cdc_ncm [ 3.013451] usbcore: registered new interface driver aqc111 [ 3.019087] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.025447] ohci-pci: OHCI PCI platform driver [ 3.029720] ohci-platform: OHCI generic platform driver [ 3.035465] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.041717] usbcore: registered new interface driver uas [ 3.046029] usbcore: registered new interface driver usb-storage [ 3.051836] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.057775] mousedev: PS/2 mouse device common for all mice [ 3.062939] usbcore: registered new interface driver xpad [ 3.070826] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.073928] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.081706] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.088123] i2c /dev entries driver [ 3.091262] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.097341] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.102472] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.108022] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.113160] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.118684] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.124088] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.136210] device-mapper: uevent: version 1.0.3 [ 3.136605] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.144300] cpuidle: Initializing cpuidle driver [ 3.148610] sdhci: Secure Digital Host Controller Interface driver [ 3.153527] sdhci: Copyright(c) Pierre Ossman [ 3.157370] Synopsys Designware Multimedia Card Interface Driver [ 3.163545] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.169708] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.170298] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.182774] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.201075] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.209942] vdd-1v0: supplied by regulator-dummy [ 3.215326] vdd-1v8-hs: supplied by regulator-dummy [ 3.219988] vdd-1v8-ls: supplied by regulator-dummy [ 3.224620] vdd-1v8-ao: supplied by regulator-dummy [ 3.228380] vddio-ddr-1v1: supplied by regulator-dummy [ 3.232710] vdd-rtc: supplied by regulator-dummy [ 3.234241] spmic-ldo1: supplied by regulator-dummy [ 3.235355] vdd-ao-3v3: supplied by regulator-dummy [ 3.241421] vddio-emmc-3v3: supplied by regulator-dummy [ 3.247494] spmic-ldo4: supplied by regulator-dummy [ 3.248607] vdd-usb-3v3: supplied by regulator-dummy [ 3.254638] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.260715] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.266119] spmic-ldo8: supplied by vdd-1v8-ls [ 3.267454] gpio-510 (gpio_default): hogged as output/high [ 3.269495] gpio-511 (gpio_default): hogged as output/high [ 3.276669] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.415025] max77686-rtc max77620-rtc: registered as rtc0 [ 3.416033] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.416337] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.112145] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.113067] hid: raw HID events driver (C) Jiri Kosina [ 4.113648] usbcore: registered new interface driver usbhid [ 4.113793] usbhid: USB HID core driver [ 4.115524] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.116769] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.142194] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.217918] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 76.532 ms) ÿá[ 4.202305] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.202844] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.203871] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.204394] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.205894] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.206423] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.206955] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.208512] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.208825] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.210693] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.218795] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.224980] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.229985] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.236181] denver_knobs_init:MTS_VERSION:55637613 [ 4.249933] t19x_cache tegra-cache: probed [ 4.252791] optee: probing for conduit method. [ 4.253627] optee: revision 3.16 (65cc2218) [ 4.254655] optee: dynamic shared memory is enabled [ 4.257230] optee: initialized driver [ 4.264104] nvpmodel: initialized successfully [ 4.264724] tegra_hv: get_hvd: not initialized yet [ 4.269286] user_ivc_mempool: hypervisor not present [ 4.275861] usbcore: registered new interface driver snd-usb-audio [ 4.282189] u32 classifier [ 4.282988] input device check on [ 4.286808] Actions configured [ 4.290553] Initializing XFRM netlink socket [ 4.295591] NET: Registered protocol family 10 [ 4.302347] Segment Routing with IPv6 [ 4.302620] NET: Registered protocol family 17 [ 4.307137] NET: Registered protocol family 15 [ 4.311242] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.324884] Bluetooth: RFCOMM socket layer initialized [ 4.329528] Bluetooth: RFCOMM ver 1.11 [ 4.333761] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.339324] Bluetooth: HIDP socket layer initialized [ 4.345419] 9pnet: Installing 9P2000 support [ 4.348742] Key type dns_resolver registered [ 4.354417] registered taskstats version 1 [ 4.357151] Loading compiled-in X.509 certificates [ 4.369936] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.373471] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.383296] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.385117] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.393876] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.401998] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.519535] tegra194-pcie 14160000.pcie: Link up [ 4.522391] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.522586] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.522707] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.522903] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.523068] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.523465] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.523843] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.533819] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.534267] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.534651] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.536215] pci 0004:01:00.0: supports D1 D2 [ 4.536364] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.545809] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.546149] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.546370] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.546704] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.546946] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.548039] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.554092] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.561707] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.569988] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.580330] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.585194] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.590294] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.597215] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.606156] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.607958] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.616663] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.624866] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.740322] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.740975] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.741213] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.741393] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.741690] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.741882] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.742282] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.742699] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.760568] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.760903] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.762441] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.764244] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.765427] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.766597] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.767532] pci 0005:00:00.0: Removing from iommu group 7 [ 5.767802] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.795953] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.815949] host1x 13e10000.host1x: initialized [ 5.817531] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.818463] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.819516] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.820149] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.821159] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.821715] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.822649] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.823513] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.833660] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.840448] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.850538] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.857399] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.867427] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.874254] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.884490] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.891612] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.901349] falcon 15340000.vic: Adding to iommu group 17 [ 5.915802] falcon 15340000.vic: initialized [ 5.916713] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.922163] falcon 15380000.nvjpg: initialized [ 5.922770] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.934100] falcon 154c0000.nvenc: initialized [ 5.934829] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.944393] falcon 15a80000.nvenc1: initialized [ 5.945142] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.956045] nvdec 15480000.nvdec: initialized [ 5.956671] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.966626] nvdec 15140000.nvdec1: initialized [ 5.967174] tsec 15500000.tsec: Adding to iommu group 18 [ 5.973281] tsec 15500000.tsec: initialized [ 5.973984] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.980911] tsec 15100000.tsecb: initialized [ 5.984580] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.009970] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.020249] gpio-374 (wifi-enable): hogged as output/high [ 6.020521] gpio-431 (camera-control-output-low): hogged as output/low [ 6.020817] gpio-432 (camera-control-output-low): hogged as output/low [ 6.022343] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.024134] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.025663] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.032614] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.037980] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.043625] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.049158] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.057338] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.065080] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.076815] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.081649] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.087725] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.096521] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.105966] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.113113] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.120535] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.126630] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.136371] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.142718] pva 16000000.pva0: Adding to iommu group 22 [ 6.169492] pva 16000000.pva0: initialized [ 6.174301] pva 16800000.pva1: Adding to iommu group 23 [ 6.185959] pva 16800000.pva1: initialized [ 6.190377] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.202842] nvdla 15880000.nvdla0: initialized [ 6.204851] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.213520] nvdla 158c0000.nvdla1: initialized [ 6.216965] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.217077] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.217427] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.217542] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.218000] tegradccommon 15200000.display-hub: dma mapping done [ 6.218295] tegradc 15200000.display: Adding to iommu group 26 [ 6.218491] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.219889] tegradc 15210000.display: Adding to iommu group 26 [ 6.228813] tegradc 15210000.display: disp0 connected to head1->sor [ 6.232389] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.238661] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.244347] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.251975] tegradc 15210000.display: DT parsed successfully [ 6.257244] tegra_cec 3960000.tegra_cec: probed [ 6.263069] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.268361] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.276269] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.282927] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.287830] generic_infoframe_type: 0x87 [ 6.294751] kfuse 3830000.kfuse: initialized [ 6.298196] tegradc 15200000.display: DT parsed successfully [ 6.303095] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.308281] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.314844] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.315552] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.326994] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.330457] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.335255] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.335307] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.345568] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.353512] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.361648] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.368616] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.370081] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.376077] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.384175] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.389883] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.396052] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.417745] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.444699] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.450534] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.458613] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.467084] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.473841] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.481568] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.488788] usb usb1: Product: xHCI Host Controller [ 6.493510] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.499631] usb usb1: SerialNumber: 3610000.xhci [ 6.505458] hub 1-0:1.0: USB hub found [ 6.508263] hub 1-0:1.0: 4 ports detected [ 6.512701] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.517884] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.525472] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.533241] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.541113] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.548292] usb usb2: Product: xHCI Host Controller [ 6.553007] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.559239] usb usb2: SerialNumber: 3610000.xhci [ 6.564866] hub 2-0:1.0: USB hub found [ 6.568035] hub 2-0:1.0: 4 ports detected [ 6.609203] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.615065] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.616356] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.616535] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.629654] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.630685] tegra194-cpufreq ccplex: probed with BWMGR [ 6.632013] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.632455] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.632937] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.634361] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.643528] mmc0: CQHCI version 5.10 [ 6.644616] tegra194-vi5 15c10000.vi: initialized [ 6.646393] tegradc 15210000.display: disp0 connected to head1->sor [ 6.648898] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.651736] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.657981] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.664956] tegradc 15210000.display: DT parsed successfully [ 6.673077] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.678518] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.685147] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.685157] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.691501] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.693085] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.699391] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.714113] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.720466] generic_infoframe_type: 0x87 [ 6.726696] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.726702] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.750954] tegradc 15200000.display: DT parsed successfully [ 6.751707] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.756495] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.772291] nvethernet 2490000.ethernet: Macsec not supported [ 6.772992] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.779100] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.786187] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.786191] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.786546] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.794083] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.795292] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.795405] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.795566] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.796531] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.798172] tegra-se-nvhost 15810000.se: initialized [ 6.802301] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.803418] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.803965] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.804676] tegra-se-nvhost 15820000.se: initialized [ 6.806787] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.807245] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.807954] tegra-se-nvhost 15830000.se: initialized [ 6.809329] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.809791] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.810458] tegra-se-nvhost 15840000.se: initialized [ 6.812465] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.817145] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.824974] tegra_actmon d230000.actmon: in actmon_register()... [ 6.830108] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.836594] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.843060] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.845018] tegradc 15200000.display: probed [ 6.849542] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.968325] Console: switching to colour frame buffer device 240x67 [ 6.968855] hvc_sysfs: hypervisor is not present [ 6.974325] tegradc 15200000.display: fb registered [ 6.979672] mmc0: Command Queue Engine enabled [ 6.984113] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.987136] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.987141] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.987145] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.987149] usb 1-2: Manufacturer: Generic [ 6.988306] mmc0: periodic cache flush enabled [ 6.988320] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.989157] hub 1-2:1.0: USB hub found [ 6.990193] hub 1-2:1.0: 4 ports detected [ 7.008295] ALSA device list: [ 7.009465] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.009669] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.010160] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.014227] No soundcards found. [ 7.018554] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.073576] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.077467] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.079659] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.084392] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.085196] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.106963] Extcon AUX1(HDMI) enable [ 7.110517] tegradc 15210000.display: disp1 connected to head1->sor [ 7.116860] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.124203] tegradc 15210000.display: DT parsed successfully [ 7.129932] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.129951] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.145800] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.151587] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.164735] tegradc 15210000.display: probed [ 7.165082] tegradc 15210000.display: fb registered [ 7.170574] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.174770] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.176163] Freeing unused kernel memory: 3968K [ 7.182519] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.187273] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.201030] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.201035] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.201038] usb 2-3: Manufacturer: Generic [ 7.201050] tegradc 15210000.display: blank - powerdown [ 7.203654] Run /init as init process [ 7.208158] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.233769] Extcon DP: HPD disabled [ 7.237447] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.244067] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.250082] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.261669] hub 2-3:1.0: USB hub found [ 7.263509] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.263671] hub 2-3:1.0: 4 ports detected [ 7.267251] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.277245] tegradc 15200000.display: blank - powerdown [ 7.287174] Root device found: mmcblk0p1 [ 7.289168] Found dev node: /dev/mmcblk0p1 [ 7.295499] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.323519] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.324041] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.324047] Extcon AUX1(HDMI) disable [ 7.327727] Rootfs mounted over mmcblk0p1 [ 7.347376] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.348255] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.361533] tegradc 15200000.display: unblank [ 7.362660] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.362858] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.364809] Switching from initrd to actual rootfs [ 7.369010] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.370918] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.375101] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.375104] Extcon AUX1(HDMI) enable [ 7.387677] tegradc 15200000.display: sync windows ret = 246 [ 7.418084] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.419524] Extcon HDMI: HPD enabled [ 7.420837] tegradc 15200000.display: hdmi: plugged [ 7.421081] random: crng init done [ 7.448711] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.450153] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.451560] usb 1-3: Product: Bluetooth Radio [ 7.452871] usb 1-3: Manufacturer: Realtek [ 7.454175] usb 1-3: SerialNumber: 00e04c000001 [ 7.513990] systemd[1]: System time before build time, advancing clock. [ 7.586092] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.590983] systemd[1]: Detected architecture arm64. [ 7.642034] systemd[1]: Set hostname to . [ 7.800191] systemd-sysv-generator[252]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.147293] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.149058] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.154687] systemd[1]: Created slice system-modprobe.slice. [ 8.159399] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.163576] systemd[1]: Created slice User and Session Slice. [ 8.166935] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.171015] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.174338] systemd[1]: Reached target User and Group Name Lookups. [ 8.177652] systemd[1]: Reached target Slices. [ 8.180768] systemd[1]: Reached target Swap. [ 8.184750] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.188427] systemd[1]: Listening on Syslog Socket. [ 8.192028] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.195395] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.199673] systemd[1]: Listening on Journal Audit Socket. [ 8.203225] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.207007] systemd[1]: Listening on Journal Socket. [ 8.210735] systemd[1]: Listening on udev Control Socket. [ 8.214318] systemd[1]: Listening on udev Kernel Socket. [ 8.223251] systemd[1]: Mounting Huge Pages File System... [ 8.233185] systemd[1]: Mounting POSIX Message Queue File System... [ 8.241338] systemd[1]: Mounting RPC Pipe File System... [ 8.249812] systemd[1]: Mounting Kernel Debug File System... [ 8.258449] systemd[1]: Mounting Kernel Trace File System... [ 8.268142] systemd[1]: Starting Journal Service... [ 8.277240] systemd[1]: Starting Set the console keyboard layout... [ 8.285523] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.289166] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.295603] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.305022] systemd[1]: Started Nameserver information manager. [ 8.309928] systemd[1]: Reached target Network (Pre). [ 8.316886] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.317073] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.324075] systemd[1]: Starting Load Kernel Modules... [ 8.332349] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.341447] systemd[1]: Starting udev Coldplug all Devices... [ 8.351362] systemd[1]: Mounted Huge Pages File System. [ 8.355353] systemd[1]: Mounted POSIX Message Queue File System. [ 8.359088] systemd[1]: Mounted RPC Pipe File System. [ 8.363049] systemd[1]: Mounted Kernel Debug File System. [ 8.363064] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.364938] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.368913] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.368918] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.368927] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.368931] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.369191] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.369352] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.369501] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.369509] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.387367] systemd[1]: Mounted Kernel Trace File System. [ 8.394639] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.401294] systemd[1]: nvfb-udev.service: Succeeded. [ 8.405485] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.417720] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.430591] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.433014] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.440138] systemd[1]: Starting Load/Save Random Seed... [ 8.448167] systemd[1]: Starting Create System Users... [ 8.459703] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.459703] [ 8.497742] systemd[1]: Finished Load Kernel Modules. [ 8.504427] systemd[1]: Finished Load/Save Random Seed. [ 8.509216] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.516977] systemd[1]: Mounting Kernel Configuration File System... [ 8.525531] systemd[1]: Started OP-TEE Client Supplicant. [ 8.533562] systemd[1]: Starting Apply Kernel Variables... [ 8.543921] systemd[1]: Finished Set the console keyboard layout. [ 8.548256] systemd[1]: Mounted Kernel Configuration File System. [ 8.559638] systemd[1]: Finished Create System Users. [ 9.993504] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.011983] imx219 9-0010: board setup failed [ 10.013263] imx219: probe of 9-0010 failed with error -121 [ 10.036683] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.044400] imx219 10-0010: board setup failed [ 10.045649] imx219: probe of 10-0010 failed with error -121 [ 10.054063] hot-surface-alert cooling state: 0 -> 1 [ 10.348157] using random self ethernet address [ 10.349406] using random host ethernet address [ 11.781776] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.783514] Creating 1 MTD partitions on "spi6.0": [ 11.786563] 0x000000000000-0x000002000000 : "Whole_flash0" [ 11.846038] using random self ethernet address [ 11.847851] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.819050] nvidia: loading out-of-tree module taints kernel. [ 58.401166] watchdog: watchdog0: watchdog did not stop! [ 58.864339] Trying to unregister non-registered hwtime source [ 61.927509] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.929692] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy : 1üÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 67000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.905] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.922] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.323] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.482] I> register 'maxim' power off handle [0003.484] I> virtual i2c enabled [0003.484] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.589] I> regulator 'vdd-hdmi-5v0' already enabled [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> hdmi cable connected [0003.599] W> set volts not configured for 'vdd-1v0' [0003.605] W> set volts not configured for 'vdd-1v8-hs' [0003.605] I> retrieved tmds range from prod_list_hdmi_soc [0003.610] E> invalid display type [0003.611] E> cannot find any other nvdisp nodes [0003.627] I> edid read success [0003.639] I> edid read success [0003.640] I> width = 640, height = 480, frequency = 25174825 [0003.640] I> width = 1920, height = 1080, frequency = 148500000 [0003.641] I> width = 1280, height = 768, frequency = 79500000 [0003.641] I> width = 1360, height = 768, frequency = 85500000 [0003.641] I> width = 720, height = 480, frequency = 26973026 [0003.645] I> width = 720, height = 576, frequency = 26973026 [0003.651] I> width = 1280, height = 720, frequency = 74175824 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1920, height = 1080, frequency = 148351648 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 720, height = 480, frequency = 26973026 [0003.679] I> width = 720, height = 576, frequency = 26973026 [0003.685] I> width = 3840, height = 2160, frequency = 296703296 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 4096, height = 2160, frequency = 296703296 [0003.713] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.725] I> hdmi_enable, starting HDMI initialisation [0003.730] I> hdmi_enable, HDMI initialisation complete [0003.739] initializing target [0003.739] calling apps_init() [0003.740] starting app kernel_boot_app [0003.741] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000804] Console: colour dummy device 80x25 [ 0.002391] printk: console [tty0] enabled [ 0.002470] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002525] pid_max: default: 32768 minimum: 301 [ 0.002715] LSM: Security Framework initializing [ 0.002775] Yama: becoming mindful. [ 0.002847] SELinux: Initializing. [ 0.003029] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003067] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006221] rcu: Hierarchical SRCU implementation. [ 0.006503] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007277] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007364] DTB Build time: Aug 10 2022 20:31:49 [ 0.010663] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010926] Remapping and enabling EFI services. [ 0.012893] smp: Bringing up secondary CPUs ... [ 0.045066] Detected PIPT I-cache on CPU1 [ 0.045126] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074800] Detected PIPT I-cache on CPU2 [ 0.074877] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104455] Detected PIPT I-cache on CPU3 [ 0.104633] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134414] Detected PIPT I-cache on CPU4 [ 0.134514] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164163] Detected PIPT I-cache on CPU5 [ 0.164233] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164561] smp: Brought up 1 node, 6 CPUs [ 0.164802] SMP: Total of 6 processors activated. [ 0.164849] CPU features: detected: Privileged Access Never [ 0.164872] CPU features: detected: LSE atomic instructions [ 0.164888] CPU features: detected: User Access Override [ 0.164901] CPU features: detected: 32-bit EL0 Support [ 0.164915] CPU features: detected: RAS Extension Support [ 0.164928] CPU features: detected: CRC32 instructions [ 0.164962] CPU features: detected: 32-bit EL1 Support [ 0.230783] CPU: All CPU(s) started at EL2 [ 0.236028] devtmpfs: initialized [ 0.303316] Registered cp15_barrier emulation handler [ 0.303434] Registered setend emulation handler [ 0.303470] KASLR enabled [ 0.303767] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.303815] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.306112] pinctrl core: initialized pinctrl subsystem [ 0.307280] SMBIOS 3.0.0 present. [ 0.307361] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.308236] NET: Registered protocol family 16 [ 0.310642] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.311381] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.312039] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.312129] audit: initializing netlink subsys (disabled) [ 0.312430] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1 [ 0.312951] thermal_sys: Registered thermal governor 'step_wise' [ 0.312964] thermal_sys: Registered thermal governor 'power_allocator' [ 0.312998] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.316272] cpuidle: using governor menu [ 0.316761] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.317172] ASID allocator initialised with 32768 entries [ 0.317496] Serial: AMBA PL011 UART driver [ 0.320856] Tegra reboot handler registered. [ 0.379639] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.379756] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.379923] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.379968] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.380128] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.380178] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.380323] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.380366] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.380501] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.380544] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.382818] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.382864] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.382893] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.382919] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.382960] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.382992] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.383019] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.383043] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.383067] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.383091] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.383115] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.383139] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.383162] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.383203] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.383227] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.383263] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.383287] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.383385] mc-err: mcerr ops are set to t19x [ 0.393904] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.393931] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.393943] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.393955] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.400745] ACPI: Interpreter disabled. [ 0.401819] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.403026] iommu: Default domain type: Translated [ 0.403102] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.403497] SCSI subsystem initialized [ 0.403646] usbcore: registered new interface driver usbfs [ 0.403686] usbcore: registered new interface driver hub [ 0.403719] usbcore: registered new device driver usb [ 0.404090] mc: Linux media interface: v0.10 [ 0.404114] videodev: Linux video capture interface: v2.00 [ 0.404429] pps_core: LinuxPPS API ver. 1 registered [ 0.404442] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.404470] PTP clock support registered [ 0.404661] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404960] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.405017] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.405627] Registered efivars operations [ 0.410484] FPGA manager framework [ 0.410581] Advanced Linux Sound Architecture Driver Initialized. [ 0.411210] Bluetooth: Core ver 2.22 [ 0.411249] NET: Registered protocol family 31 [ 0.411260] Bluetooth: HCI device and connection manager initialized [ 0.411299] Bluetooth: HCI socket layer initialized [ 0.411318] Bluetooth: L2CAP socket layer initialized [ 0.411339] Bluetooth: SCO socket layer initialized [ 0.412625] camchar: rtcpu character device driver loaded [ 0.413196] clocksource: Switched to clocksource arch_sys_counter [ 0.707779] VFS: Disk quotas dquot_6.6.0 [ 0.707849] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.708147] pnp: PnP ACPI: disabled [ 0.717734] la/ptsa driver initialized. [ 0.717846] NET: Registered protocol family 2 [ 0.718008] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.723552] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.723619] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.723976] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.724409] TCP: Hash tables configured (established 65536 bind 65536) [ 0.724536] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.724626] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.724865] NET: Registered protocol family 1 [ 0.725781] RPC: Registered named UNIX socket transport module. [ 0.725838] RPC: Registered udp transport module. [ 0.725853] RPC: Registered tcp transport module. [ 0.725867] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.725888] PCI: CLS 0 bytes, default 64 [ 0.726161] Trying to unpack rootfs image as initramfs... [ 0.998401] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.001322] Freeing initrd memory: 8196K [ 1.005906] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.005938] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.005975] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.006341] kvm [1]: IPA Size Limit: 40 bits [ 1.006871] kvm [1]: vgic interrupt IRQ9 [ 1.007330] kvm [1]: VHE mode initialized successfully [ 1.008729] Initialise system trusted keyrings [ 1.009028] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.014214] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.015042] NFS: Registering the id_resolver key type [ 1.015084] Key type id_resolver registered [ 1.015099] Key type id_legacy registered [ 1.015185] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.015209] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.015247] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.025312] NET: Registered protocol family 38 [ 1.025338] Key type asymmetric registered [ 1.025353] Asymmetric key parser 'x509' registered [ 1.025411] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.025652] io scheduler mq-deadline registered [ 1.025670] io scheduler kyber registered [ 1.031467] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.034546] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.034628] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.034699] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.034774] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.034852] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.041001] scrncapt: init (heads:4 wins:6 planes:4) [ 1.041014] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.042254] EINJ: ACPI disabled. [ 1.045976] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.046001] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.046017] tegra-pmc: ### PMC reset level: L1 [ 1.046032] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.046079] tegra-pmc: PMC Prod config success [ 1.051666] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.057464] random: fast init done [ 1.058014] printk: console [ttyTCU0] enabled [ 2.609796] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.614344] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.618935] arm-smmu 10000000.iommu: stage 1 translation [ 2.624280] arm-smmu 10000000.iommu: stage 2 translation [ 2.629657] arm-smmu 10000000.iommu: nested translation [ 2.635024] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.642428] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.653081] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.655550] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.661855] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.669597] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.675149] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.679875] arm-smmu 12000000.iommu: stage 1 translation [ 2.685126] arm-smmu 12000000.iommu: stage 2 translation [ 2.690808] arm-smmu 12000000.iommu: nested translation [ 2.695989] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.703416] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.713952] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.716516] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.722868] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.730513] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.740093] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.743496] tegra_profiler: auth: init [ 2.747497] THERMAL EST: found 3 subdevs [ 2.751192] THERMAL EST num_resources: 0 [ 2.754790] [THERMAL EST subdev 0] [ 2.758358] [THERMAL EST subdev 1] [ 2.761770] [THERMAL EST subdev 2] [ 2.764764] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.771466] THERMAL EST: thz register success. [ 2.775716] THERMAL EST: end of probe, return err: 0 [ 2.780713] nvsciipc: loaded module [ 2.787918] tun: Universal TUN/TAP device driver, 1.6 [ 2.790880] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.796535] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.802349] e1000e: Intel(R) PRO/1000 Network Driver [ 2.807018] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.813092] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.818653] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.824913] PPP generic driver version 2.4.2 [ 2.829115] PPP BSD Compression module registered [ 2.833362] PPP Deflate Compression module registered [ 2.838610] PPP MPPE Compression module registered [ 2.843907] usbcore: registered new interface driver r8152 [ 2.849136] usbcore: registered new interface driver asix [ 2.854722] usbcore: registered new interface driver ax88179_178a [ 2.860596] usbcore: registered new interface driver cdc_ether [ 2.866797] usbcore: registered new interface driver net1080 [ 2.872422] usbcore: registered new interface driver cdc_subset [ 2.878445] usbcore: registered new interface driver zaurus [ 2.883878] usbcore: registered new interface driver cdc_ncm [ 2.889815] usbcore: registered new interface driver aqc111 [ 2.895217] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.901266] ohci-pci: OHCI PCI platform driver [ 2.905568] ohci-platform: OHCI generic platform driver [ 2.911412] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.917742] usbcore: registered new interface driver uas [ 2.921861] usbcore: registered new interface driver usb-storage [ 2.928245] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.934035] mousedev: PS/2 mouse device common for all mice [ 2.939305] usbcore: registered new interface driver xpad [ 2.947250] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.950037] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.957808] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.964052] i2c /dev entries driver [ 2.967446] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.973530] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.978504] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.984243] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.989535] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.994798] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.000195] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.014085] device-mapper: uevent: version 1.0.3 [ 3.014518] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.020833] cpuidle: Initializing cpuidle driver [ 3.024934] sdhci: Secure Digital Host Controller Interface driver [ 3.029629] sdhci: Copyright(c) Pierre Ossman [ 3.033470] Synopsys Designware Multimedia Card Interface Driver [ 3.040178] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.045653] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.046571] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.059271] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.080335] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.089659] vdd-1v0: supplied by regulator-dummy [ 3.095126] vdd-1v8-hs: supplied by regulator-dummy [ 3.099932] vdd-1v8-ls: supplied by regulator-dummy [ 3.104766] vdd-1v8-ao: supplied by regulator-dummy [ 3.108654] vddio-ddr-1v1: supplied by regulator-dummy [ 3.113094] vdd-rtc: supplied by regulator-dummy [ 3.114815] spmic-ldo1: supplied by regulator-dummy [ 3.116053] vdd-ao-3v3: supplied by regulator-dummy [ 3.122241] vddio-emmc-3v3: supplied by regulator-dummy [ 3.128562] spmic-ldo4: supplied by regulator-dummy [ 3.129848] vdd-usb-3v3: supplied by regulator-dummy [ 3.136100] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.142308] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.147839] spmic-ldo8: supplied by vdd-1v8-ls [ 3.149288] gpio-510 (gpio_default): hogged as output/high [ 3.150632] gpio-511 (gpio_default): hogged as output/high [ 3.153617] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.292015] max77686-rtc max77620-rtc: registered as rtc0 [ 3.293291] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.293621] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.118942] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.120012] hid: raw HID events driver (C) Jiri Kosina [ 4.120942] usbcore: registered new interface driver usbhid [ 4.121091] usbhid: USB HID core driver [ 4.123189] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.124547] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.195904] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.270268] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.173 ms) ÿá[ 4.208971] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.209562] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.210578] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.211235] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.212794] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.213464] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.214133] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.215363] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.215610] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.218282] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.226041] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.232036] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.236796] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.242917] denver_knobs_init:MTS_VERSION:55637613 [ 4.255845] t19x_cache tegra-cache: probed [ 4.259195] optee: probing for conduit method. [ 4.260033] optee: revision 3.16 (65cc2218) [ 4.261303] optee: dynamic shared memory is enabled [ 4.263894] optee: initialized driver [ 4.271386] nvpmodel: initialized successfully [ 4.272073] tegra_hv: get_hvd: not initialized yet [ 4.276173] user_ivc_mempool: hypervisor not present [ 4.282639] usbcore: registered new interface driver snd-usb-audio [ 4.289511] u32 classifier [ 4.289931] input device check on [ 4.293700] Actions configured [ 4.297597] Initializing XFRM netlink socket [ 4.302453] NET: Registered protocol family 10 [ 4.309297] Segment Routing with IPv6 [ 4.309543] NET: Registered protocol family 17 [ 4.314120] NET: Registered protocol family 15 [ 4.318242] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.331728] Bluetooth: RFCOMM socket layer initialized [ 4.336694] Bluetooth: RFCOMM ver 1.11 [ 4.340451] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.346466] Bluetooth: HIDP socket layer initialized [ 4.352031] 9pnet: Installing 9P2000 support [ 4.355695] Key type dns_resolver registered [ 4.361423] registered taskstats version 1 [ 4.364064] Loading compiled-in X.509 certificates [ 4.377410] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.380284] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.391049] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.392245] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.400572] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.409286] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.525264] tegra194-pcie 14160000.pcie: Link up [ 4.528480] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.528758] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.528914] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.529132] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.529471] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.529861] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.530314] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.543188] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.543700] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.544192] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.545768] pci 0004:01:00.0: supports D1 D2 [ 4.545946] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.557733] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.557986] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.558248] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.558821] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.559058] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.559286] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.559805] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.567292] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.576015] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.585756] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.590433] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.596049] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.603162] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.612578] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.614015] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.622450] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.630629] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.746054] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.746744] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.746938] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.747130] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.747367] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.747574] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.747943] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.748346] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.763859] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.764178] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.766255] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.767582] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.768982] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.770277] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.771179] pci 0005:00:00.0: Removing from iommu group 7 [ 5.771604] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.804030] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.828273] host1x 13e10000.host1x: initialized [ 5.829921] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.830986] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.832323] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.833145] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.834681] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.835336] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.836612] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.837447] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.839595] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.845973] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.856094] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.863232] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.873308] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.880314] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.890064] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.897311] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.907000] falcon 15340000.vic: Adding to iommu group 17 [ 5.921266] falcon 15340000.vic: initialized [ 5.922209] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.927791] falcon 15380000.nvjpg: initialized [ 5.928365] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.940523] falcon 154c0000.nvenc: initialized [ 5.941452] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.950296] falcon 15a80000.nvenc1: initialized [ 5.950981] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.962843] nvdec 15480000.nvdec: initialized [ 5.963449] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.973245] nvdec 15140000.nvdec1: initialized [ 5.973855] tsec 15500000.tsec: Adding to iommu group 18 [ 5.980258] tsec 15500000.tsec: initialized [ 5.980792] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.987933] tsec 15100000.tsecb: initialized [ 5.992163] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.019385] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.032107] gpio-374 (wifi-enable): hogged as output/high [ 6.032385] gpio-431 (camera-control-output-low): hogged as output/low [ 6.032706] gpio-432 (camera-control-output-low): hogged as output/low [ 6.034465] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.036278] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.036812] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.038252] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.043624] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.049499] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.054790] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.063116] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.070741] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.082300] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.087203] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.093034] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.102175] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.111065] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.118304] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.126240] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.132254] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.142090] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.148379] pva 16000000.pva0: Adding to iommu group 22 [ 6.175904] pva 16000000.pva0: initialized [ 6.180540] pva 16800000.pva1: Adding to iommu group 23 [ 6.192299] pva 16800000.pva1: initialized [ 6.196478] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.216999] nvdla 15880000.nvdla0: initialized [ 6.218435] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.227656] nvdla 158c0000.nvdla1: initialized [ 6.232057] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.232182] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.232355] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.232858] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.232906] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.233410] tegradccommon 15200000.display-hub: dma mapping done [ 6.233953] tegradc 15210000.display: Adding to iommu group 26 [ 6.234261] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.238254] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.242119] tegradc 15210000.display: disp0 connected to head1->sor [ 6.242228] tegradc 15200000.display: Adding to iommu group 26 [ 6.243244] tegra_cec 3960000.tegra_cec: probed [ 6.249547] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.256436] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.260696] tegradc 15210000.display: DT parsed successfully [ 6.269925] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.273536] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.279472] kfuse 3830000.kfuse: initialized [ 6.286779] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.294389] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.298250] generic_infoframe_type: 0x87 [ 6.304216] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.311041] tegradc 15200000.display: DT parsed successfully [ 6.315504] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.321355] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.327530] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.337027] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.342468] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.349671] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.349699] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.358671] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.365171] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.373374] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.376365] random: crng init done [ 6.380496] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.389874] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.396344] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.413432] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.422494] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.429949] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.430043] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.431126] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.441183] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.446975] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.483447] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.490607] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.497848] usb usb1: Product: xHCI Host Controller [ 6.502560] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.508687] usb usb1: SerialNumber: 3610000.xhci [ 6.514610] hub 1-0:1.0: USB hub found [ 6.517422] hub 1-0:1.0: 4 ports detected [ 6.522236] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.526907] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.534791] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.542233] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.550191] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.557409] usb usb2: Product: xHCI Host Controller [ 6.562182] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.568412] usb usb2: SerialNumber: 3610000.xhci [ 6.573991] hub 2-0:1.0: USB hub found [ 6.577049] hub 2-0:1.0: 4 ports detected [ 6.623092] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.629046] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.630685] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.630869] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.644158] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.645258] tegra194-cpufreq ccplex: probed with BWMGR [ 6.646552] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.647068] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.647491] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.648898] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.655422] tegra194-vi5 15c10000.vi: initialized [ 6.656607] tegradc 15210000.display: disp0 connected to head1->sor [ 6.657135] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.658187] mmc0: CQHCI version 5.10 [ 6.658491] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.658692] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.658697] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.658703] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.658707] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.658711] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.664356] tegradc 15210000.display: DT parsed successfully [ 6.665270] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.665278] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.665283] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.666549] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.666597] nvethernet 2490000.ethernet: Macsec not supported [ 6.667825] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.673952] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.674049] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.683140] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.688676] generic_infoframe_type: 0x87 [ 6.695432] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.696766] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.701656] tegradc 15200000.display: DT parsed successfully [ 6.708123] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.713839] tegradc 15200000.display: Display dc.000000005d2b94d5 registered with id=0 [ 6.721765] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.728279] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.735756] tegra-se-nvhost 15810000.se: initialized [ 6.741587] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.741591] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.741930] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.752869] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.755409] tegradc 15200000.display: vpulse3 syncpt # 13 for dc 0 [ 6.755603] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.763386] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.770815] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.776114] tegra-se-nvhost 15820000.se: initialized [ 6.779378] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.781613] tegradc 15200000.display: probed [ 6.788389] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.789231] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.795908] mmc0: Command Queue Engine enabled [ 6.800638] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.806822] mmc0: periodic cache flush enabled [ 6.815266] tegra-se-nvhost 15830000.se: initialized [ 6.820980] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.821680] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.830686] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.834051] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.842793] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.861807] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.863715] tegra-se-nvhost 15840000.se: initialized [ 6.971799] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.976530] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.982319] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.988294] tegra_actmon d230000.actmon: in actmon_register()... [ 6.995419] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.995424] usb 1-2: Manufacturer: Generic [ 6.997564] hub 1-2:1.0: USB hub found [ 7.001720] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.010068] hub 1-2:1.0: 4 ports detected [ 7.015055] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.045221] Console: switching to colour frame buffer device 240x67 [ 7.045703] hvc_sysfs: hypervisor is not present [ 7.051254] tegradc 15200000.display: fb registered [ 7.051325] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.086836] ALSA device list: [ 7.086955] No soundcards found. [ 7.088316] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.088701] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.106211] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.143122] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.143362] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.143556] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.143738] usb 2-3: Manufacturer: Generic [ 7.155062] hub 2-3:1.0: USB hub found [ 7.155863] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.157285] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.157325] hub 2-3:1.0: 4 ports detected [ 7.157537] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.158688] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.158936] Extcon AUX1(HDMI) enable [ 7.160133] tegradc 15210000.display: disp1 connected to head1->sor [ 7.166538] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.173294] tegradc 15210000.display: DT parsed successfully [ 7.178790] tegradc 15210000.display: Display dc.00000000819661b6 registered with id=1 [ 7.186985] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.192912] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.205718] tegradc 15210000.display: probed [ 7.206031] tegradc 15210000.display: fb registered [ 7.211628] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.215834] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.217695] Freeing unused kernel memory: 3968K [ 7.223398] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.233783] tegradc 15210000.display: blank - powerdown [ 7.238801] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.241343] Run /init as init process [ 7.247084] Extcon DP: HPD disabled [ 7.247091] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.254514] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.261237] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.267111] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.269254] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.286969] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.308916] tegradc 15200000.display: blank - powerdown [ 7.337455] Root device found: mmcblk0p1 [ 7.339491] Found dev node: /dev/mmcblk0p1 [ 7.356255] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.356261] Extcon AUX1(HDMI) disable [ 7.375463] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.379550] Rootfs mounted over mmcblk0p1 [ 7.379715] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.380611] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.392856] tegradc 15200000.display: unblank [ 7.393952] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.394142] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.400978] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.402927] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.406906] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.406911] Extcon AUX1(HDMI) enable [ 7.419670] tegradc 15200000.display: sync windows ret = 247 [ 7.424626] Switching from initrd to actual rootfs [ 7.434430] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.452795] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.452800] usb 1-3: Product: Bluetooth Radio [ 7.452804] usb 1-3: Manufacturer: Realtek [ 7.452816] usb 1-3: SerialNumber: 00e04c000001 [ 7.454360] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.469302] Extcon HDMI: HPD enabled [ 7.473127] tegradc 15200000.display: hdmi: plugged [ 7.590417] systemd[1]: System time before build time, advancing clock. [ 7.662373] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.667377] systemd[1]: Detected architecture arm64. [ 7.725324] systemd[1]: Set hostname to . [ 7.882509] systemd-sysv-generator[252]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.232103] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.233976] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.239621] systemd[1]: Created slice system-modprobe.slice. [ 8.244423] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.248710] systemd[1]: Created slice User and Session Slice. [ 8.252165] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.256348] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.259750] systemd[1]: Reached target User and Group Name Lookups. [ 8.262971] systemd[1]: Reached target Slices. [ 8.266091] systemd[1]: Reached target Swap. [ 8.270183] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.273862] systemd[1]: Listening on Syslog Socket. [ 8.277494] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.280926] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.285256] systemd[1]: Listening on Journal Audit Socket. [ 8.288896] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.292738] systemd[1]: Listening on Journal Socket. [ 8.296506] systemd[1]: Listening on udev Control Socket. [ 8.300045] systemd[1]: Listening on udev Kernel Socket. [ 8.308138] systemd[1]: Mounting Huge Pages File System... [ 8.316085] systemd[1]: Mounting POSIX Message Queue File System... [ 8.323993] systemd[1]: Mounting RPC Pipe File System... [ 8.332588] systemd[1]: Mounting Kernel Debug File System... [ 8.341260] systemd[1]: Mounting Kernel Trace File System... [ 8.352482] systemd[1]: Starting Journal Service... [ 8.361359] systemd[1]: Starting Set the console keyboard layout... [ 8.369580] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.373180] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.379687] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.387983] systemd[1]: Started Nameserver information manager. [ 8.392944] systemd[1]: Reached target Network (Pre). [ 8.400082] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.400293] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.408280] systemd[1]: Starting Load Kernel Modules... [ 8.416276] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.425907] systemd[1]: Starting udev Coldplug all Devices... [ 8.436687] systemd[1]: Mounted Huge Pages File System. [ 8.440617] systemd[1]: Mounted POSIX Message Queue File System. [ 8.444691] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.445622] systemd[1]: Mounted RPC Pipe File System. [ 8.450757] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.452425] systemd[1]: Mounted Kernel Debug File System. [ 8.453087] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.455517] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.455532] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.455536] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.455908] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.457159] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.458694] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.465319] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.470035] systemd[1]: Mounted Kernel Trace File System. [ 8.479890] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.486628] systemd[1]: nvfb-udev.service: Succeeded. [ 8.490812] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.504190] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.517076] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.519496] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.526204] systemd[1]: Starting Load/Save Random Seed... [ 8.534721] systemd[1]: Starting Create System Users... [ 8.553304] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.553304] [ 8.589869] systemd[1]: Finished Load Kernel Modules. [ 8.596479] systemd[1]: Finished Load/Save Random Seed. [ 8.602007] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.608532] systemd[1]: Mounting Kernel Configuration File System... [ 8.617411] systemd[1]: Started OP-TEE Client Supplicant. [ 8.626279] systemd[1]: Starting Apply Kernel Variables... [ 8.636155] systemd[1]: Finished Set the console keyboard layout. [ 8.642973] systemd[1]: Finished Create System Users. [ 8.647196] systemd[1]: Mounted Kernel Configuration File System. [ 8.655518] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.062767] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.073729] imx219 9-0010: board setup failed [ 10.075215] imx219: probe of 9-0010 failed with error -121 [ 10.087673] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.101520] imx219 10-0010: board setup failed [ 10.101632] imx219: probe of 10-0010 failed with error -121 [ 10.188145] hot-surface-alert cooling state: 0 -> 1 [ 11.016006] using random self ethernet address [ 11.017476] using random host ethernet address [ 11.645588] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.645595] Creating 1 MTD partitions on "spi6.0": [ 11.645606] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.427961] using random self ethernet address [ 12.429990] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.858081] nvidia: loading out-of-tree module taints kernel. [ 59.495055] watchdog: watchdog0: watchdog did not stop! [ 59.986026] Trying to unregister non-registered hwtime source [ 63.044137] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.046006] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] tiÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aÿâclk_dt_late initialized ÿäuÿânoc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized cvc initialized ÿä 03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 202ÿâavfs_clk_platform_post initialized ÿä2 aÿâcvc_late initialized regulator_post initialized ÿäarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.645] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.745] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000941] Console: colour dummy device 80x25 [ 0.002512] printk: console [tty0] enabled [ 0.002573] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002610] pid_max: default: 32768 minimum: 301 [ 0.002817] LSM: Security Framework initializing [ 0.002919] Yama: becoming mindful. [ 0.002964] SELinux: Initializing. [ 0.003112] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003160] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006694] rcu: Hierarchical SRCU implementation. [ 0.006987] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007807] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007873] DTB Build time: Aug 10 2022 20:31:49 [ 0.010880] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011194] Remapping and enabling EFI services. [ 0.013144] smp: Bringing up secondary CPUs ... [ 0.043041] Detected PIPT I-cache on CPU1 [ 0.043118] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.075190] Detected PIPT I-cache on CPU2 [ 0.075268] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104832] Detected PIPT I-cache on CPU3 [ 0.104901] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134540] Detected PIPT I-cache on CPU4 [ 0.134642] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164217] Detected PIPT I-cache on CPU5 [ 0.164285] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164604] smp: Brought up 1 node, 6 CPUs [ 0.164841] SMP: Total of 6 processors activated. [ 0.164862] CPU features: detected: Privileged Access Never [ 0.164892] CPU features: detected: LSE atomic instructions [ 0.164906] CPU features: detected: User Access Override [ 0.164919] CPU features: detected: 32-bit EL0 Support [ 0.164931] CPU features: detected: RAS Extension Support [ 0.164944] CPU features: detected: CRC32 instructions [ 0.164956] CPU features: detected: 32-bit EL1 Support [ 0.235978] CPU: All CPU(s) started at EL2 [ 0.241638] devtmpfs: initialized [ 0.291357] Registered cp15_barrier emulation handler [ 0.291476] Registered setend emulation handler [ 0.291497] KASLR enabled [ 0.291746] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291794] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293357] pinctrl core: initialized pinctrl subsystem [ 0.294483] SMBIOS 3.0.0 present. [ 0.294514] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.295208] NET: Registered protocol family 16 [ 0.297189] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.297699] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.298437] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.298508] audit: initializing netlink subsys (disabled) [ 0.298835] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.299236] thermal_sys: Registered thermal governor 'step_wise' [ 0.299242] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299257] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.302705] cpuidle: using governor menu [ 0.303021] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.303447] ASID allocator initialised with 32768 entries [ 0.303723] Serial: AMBA PL011 UART driver [ 0.307254] Tegra reboot handler registered. [ 0.377374] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.377524] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.377740] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.377789] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.377920] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.377968] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.378125] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.378171] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.378310] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.378355] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.380884] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.380935] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.380966] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.381009] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.381043] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.381086] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.381120] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.381148] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.381173] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.381199] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.381225] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.381251] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.381276] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.381302] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.381327] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.381353] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.381378] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.381472] mc-err: mcerr ops are set to t19x [ 0.393479] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.393503] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.393516] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.393528] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.400219] ACPI: Interpreter disabled. [ 0.401417] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.402673] iommu: Default domain type: Translated [ 0.402734] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.403202] SCSI subsystem initialized [ 0.403358] usbcore: registered new interface driver usbfs [ 0.403404] usbcore: registered new interface driver hub [ 0.403445] usbcore: registered new device driver usb [ 0.403794] mc: Linux media interface: v0.10 [ 0.403821] videodev: Linux video capture interface: v2.00 [ 0.404107] pps_core: LinuxPPS API ver. 1 registered [ 0.404120] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.404174] PTP clock support registered [ 0.404378] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404711] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.404800] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.405308] Registered efivars operations [ 0.410931] FPGA manager framework [ 0.411040] Advanced Linux Sound Architecture Driver Initialized. [ 0.411659] Bluetooth: Core ver 2.22 [ 0.411703] NET: Registered protocol family 31 [ 0.411715] Bluetooth: HCI device and connection manager initialized [ 0.411731] Bluetooth: HCI socket layer initialized [ 0.411747] Bluetooth: L2CAP socket layer initialized [ 0.411768] Bluetooth: SCO socket layer initialized [ 0.413877] camchar: rtcpu character device driver loaded [ 0.414820] clocksource: Switched to clocksource arch_sys_counter [ 0.823074] VFS: Disk quotas dquot_6.6.0 [ 0.823189] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.823701] pnp: PnP ACPI: disabled [ 0.837293] la/ptsa driver initialized. [ 0.837449] NET: Registered protocol family 2 [ 0.837639] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.845398] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.845602] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.845951] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.846574] TCP: Hash tables configured (established 65536 bind 65536) [ 0.846753] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.846958] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.847304] NET: Registered protocol family 1 [ 0.848347] RPC: Registered named UNIX socket transport module. [ 0.848385] RPC: Registered udp transport module. [ 0.848405] RPC: Registered tcp transport module. [ 0.848425] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.848457] PCI: CLS 0 bytes, default 64 [ 0.848741] Trying to unpack rootfs image as initramfs... [ 1.120239] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.123647] Freeing initrd memory: 8196K [ 1.127723] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.127775] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.127826] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.128127] kvm [1]: IPA Size Limit: 40 bits [ 1.128571] kvm [1]: vgic interrupt IRQ9 [ 1.129089] kvm [1]: VHE mode initialized successfully [ 1.130381] Initialise system trusted keyrings [ 1.130645] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.136663] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.137595] NFS: Registering the id_resolver key type [ 1.137630] Key type id_resolver registered [ 1.137645] Key type id_legacy registered [ 1.137737] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.137761] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.137798] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.147566] NET: Registered protocol family 38 [ 1.147589] Key type asymmetric registered [ 1.147632] Asymmetric key parser 'x509' registered [ 1.147684] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.147955] io scheduler mq-deadline registered [ 1.147977] io scheduler kyber registered [ 1.153756] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.156934] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.157018] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.157101] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.157214] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.157321] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.163113] scrncapt: init (heads:4 wins:6 planes:4) [ 1.163208] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.164505] EINJ: ACPI disabled. [ 1.168293] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.168318] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.168334] tegra-pmc: ### PMC reset level: L1 [ 1.168347] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.168401] tegra-pmc: PMC Prod config success [ 1.173503] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.178406] random: fast init done [ 1.178654] printk: console [ttyTCU0] enabled [ 2.731564] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.735583] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.740161] arm-smmu 10000000.iommu: stage 1 translation [ 2.746010] arm-smmu 10000000.iommu: stage 2 translation [ 2.751154] arm-smmu 10000000.iommu: nested translation [ 2.756743] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.763924] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.773724] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.776784] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.783603] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.791228] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.796380] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.801105] arm-smmu 12000000.iommu: stage 1 translation [ 2.806876] arm-smmu 12000000.iommu: stage 2 translation [ 2.812041] arm-smmu 12000000.iommu: nested translation [ 2.817725] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.824922] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.834518] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.838052] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.844331] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.852113] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.861620] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.864985] tegra_profiler: auth: init [ 2.869016] THERMAL EST: found 3 subdevs [ 2.872684] THERMAL EST num_resources: 0 [ 2.876306] [THERMAL EST subdev 0] [ 2.879854] [THERMAL EST subdev 1] [ 2.883048] [THERMAL EST subdev 2] [ 2.886488] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.892991] THERMAL EST: thz register success. [ 2.897223] THERMAL EST: end of probe, return err: 0 [ 2.902274] nvsciipc: loaded module [ 2.909500] tun: Universal TUN/TAP device driver, 1.6 [ 2.912013] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.918275] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.923571] e1000e: Intel(R) PRO/1000 Network Driver [ 2.928764] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.934609] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.940165] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.946460] PPP generic driver version 2.4.2 [ 2.950336] PPP BSD Compression module registered [ 2.955110] PPP Deflate Compression module registered [ 2.960358] PPP MPPE Compression module registered [ 2.965119] usbcore: registered new interface driver r8152 [ 2.970889] usbcore: registered new interface driver asix [ 2.975974] usbcore: registered new interface driver ax88179_178a [ 2.982084] usbcore: registered new interface driver cdc_ether [ 2.988291] usbcore: registered new interface driver net1080 [ 2.993889] usbcore: registered new interface driver cdc_subset [ 2.999679] usbcore: registered new interface driver zaurus [ 3.005380] usbcore: registered new interface driver cdc_ncm [ 3.011053] usbcore: registered new interface driver aqc111 [ 3.016732] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.023018] ohci-pci: OHCI PCI platform driver [ 3.027068] ohci-platform: OHCI generic platform driver [ 3.032883] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.039627] usbcore: registered new interface driver uas [ 3.043357] usbcore: registered new interface driver usb-storage [ 3.049735] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.055551] mousedev: PS/2 mouse device common for all mice [ 3.060786] usbcore: registered new interface driver xpad [ 3.068513] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.071293] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.079042] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.085619] i2c /dev entries driver [ 3.088930] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.094709] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.100282] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.105756] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.111083] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.116634] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.122027] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.135305] device-mapper: uevent: version 1.0.3 [ 3.135767] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.142326] cpuidle: Initializing cpuidle driver [ 3.146389] sdhci: Secure Digital Host Controller Interface driver [ 3.151121] sdhci: Copyright(c) Pierre Ossman [ 3.154985] Synopsys Designware Multimedia Card Interface Driver [ 3.161416] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.167392] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.168264] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.180665] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.203971] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.214012] vdd-1v0: supplied by regulator-dummy [ 3.219511] vdd-1v8-hs: supplied by regulator-dummy [ 3.224348] vdd-1v8-ls: supplied by regulator-dummy [ 3.229229] vdd-1v8-ao: supplied by regulator-dummy [ 3.233183] vddio-ddr-1v1: supplied by regulator-dummy [ 3.237708] vdd-rtc: supplied by regulator-dummy [ 3.239491] spmic-ldo1: supplied by regulator-dummy [ 3.240740] vdd-ao-3v3: supplied by regulator-dummy [ 3.246962] vddio-emmc-3v3: supplied by regulator-dummy [ 3.253263] spmic-ldo4: supplied by regulator-dummy [ 3.254598] vdd-usb-3v3: supplied by regulator-dummy [ 3.260981] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.267339] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.272881] spmic-ldo8: supplied by vdd-1v8-ls [ 3.274391] gpio-510 (gpio_default): hogged as output/high [ 3.275804] gpio-511 (gpio_default): hogged as output/high [ 3.278643] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.414295] max77686-rtc max77620-rtc: registered as rtc0 [ 3.415359] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.415697] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.268538] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.269776] hid: raw HID events driver (C) Jiri Kosina [ 4.270616] usbcore: registered new interface driver usbhid [ 4.270765] usbhid: USB HID core driver [ 4.272907] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.274321] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.261152] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.335298] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.954 ms) ÿá[ 4.358606] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.359368] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.360467] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.361417] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.363108] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.363930] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.364675] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.366131] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.366373] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.369555] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.375193] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.381505] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.387400] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.393838] denver_knobs_init:MTS_VERSION:55637613 [ 4.406295] t19x_cache tegra-cache: probed [ 4.409911] optee: probing for conduit method. [ 4.410926] optee: revision 3.16 (65cc2218) [ 4.411929] optee: dynamic shared memory is enabled [ 4.413688] optee: initialized driver [ 4.421917] nvpmodel: initialized successfully [ 4.422638] tegra_hv: get_hvd: not initialized yet [ 4.425866] user_ivc_mempool: hypervisor not present [ 4.431595] usbcore: registered new interface driver snd-usb-audio [ 4.438270] u32 classifier [ 4.439724] input device check on [ 4.443325] Actions configured [ 4.446649] Initializing XFRM netlink socket [ 4.451761] NET: Registered protocol family 10 [ 4.457784] Segment Routing with IPv6 [ 4.459013] NET: Registered protocol family 17 [ 4.463462] NET: Registered protocol family 15 [ 4.467629] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.481587] Bluetooth: RFCOMM socket layer initialized [ 4.486032] Bluetooth: RFCOMM ver 1.11 [ 4.489786] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.495898] Bluetooth: HIDP socket layer initialized [ 4.501498] 9pnet: Installing 9P2000 support [ 4.505153] Key type dns_resolver registered [ 4.510710] registered taskstats version 1 [ 4.513840] Loading compiled-in X.509 certificates [ 4.526310] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.529330] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.539629] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.541424] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.550300] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.558392] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.674874] tegra194-pcie 14160000.pcie: Link up [ 4.677945] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.678171] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.678354] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.678574] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.678932] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.679417] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.679907] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.694113] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.694895] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.695362] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.696980] pci 0004:01:00.0: supports D1 D2 [ 4.697243] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.709719] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.710212] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.710550] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.711103] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.711363] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.711667] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.711910] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.717119] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.725430] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.736181] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.740343] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.745781] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.753091] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.762703] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.763626] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.771901] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.780630] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.886947] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.887558] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.887753] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.887956] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.888238] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.888420] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.888808] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.889390] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.911942] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.912257] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.914080] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.915729] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.917346] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.918775] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.920070] pci 0005:00:00.0: Removing from iommu group 7 [ 5.920474] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.956988] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.981392] host1x 13e10000.host1x: initialized [ 5.983014] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.983957] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.985314] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.985992] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.987376] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.988101] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.989240] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.989885] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.991012] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.991658] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.997007] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.004147] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.014093] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.020961] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.030914] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.038158] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.047956] falcon 15340000.vic: Adding to iommu group 17 [ 6.063302] falcon 15340000.vic: initialized [ 6.064412] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.070134] falcon 15380000.nvjpg: initialized [ 6.070852] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.081225] falcon 154c0000.nvenc: initialized [ 6.081887] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.091393] falcon 15a80000.nvenc1: initialized [ 6.092012] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.103498] nvdec 15480000.nvdec: initialized [ 6.104232] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.115324] nvdec 15140000.nvdec1: initialized [ 6.115936] tsec 15500000.tsec: Adding to iommu group 18 [ 6.121923] tsec 15500000.tsec: initialized [ 6.122536] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.127897] tsec 15100000.tsecb: initialized [ 6.131996] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.163171] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.176940] gpio-374 (wifi-enable): hogged as output/high [ 6.177243] gpio-431 (camera-control-output-low): hogged as output/low [ 6.177554] gpio-432 (camera-control-output-low): hogged as output/low [ 6.179208] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.181100] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.181725] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.183269] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.184465] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.189808] random: crng init done [ 6.193217] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.199704] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.208277] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.215191] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.227493] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.231741] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.237669] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.246333] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.255640] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.262713] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.270365] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.276856] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.286171] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.292459] pva 16000000.pva0: Adding to iommu group 22 [ 6.321692] pva 16000000.pva0: initialized [ 6.327198] pva 16800000.pva1: Adding to iommu group 23 [ 6.339134] pva 16800000.pva1: initialized [ 6.344282] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.358058] nvdla 15880000.nvdla0: initialized [ 6.359668] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.369226] nvdla 158c0000.nvdla1: initialized [ 6.372914] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.373305] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.373372] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.374038] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.374339] tegradc 15200000.display: Adding to iommu group 26 [ 6.374425] tegradccommon 15200000.display-hub: dma mapping done [ 6.374445] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.375087] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.382437] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.383315] tegradc 15210000.display: Adding to iommu group 26 [ 6.383519] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.383639] generic_infoframe_type: 0x87 [ 6.383816] tegradc 15200000.display: DT parsed successfully [ 6.383919] tegradc 15200000.display: Display dc.0000000055cc6c1b registered with id=0 [ 6.387598] tegra_cec 3960000.tegra_cec: probed [ 6.387919] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.387929] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.387983] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.388891] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.388904] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.390083] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.392677] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.393852] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.401418] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.407058] tegradc 15210000.display: disp0 connected to head1->sor [ 6.412734] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.417852] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.423026] kfuse 3830000.kfuse: initialized [ 6.430767] tegradc 15210000.display: DT parsed successfully [ 6.439716] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.447390] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.453033] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.541648] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.547924] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.557188] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.562165] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.571775] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.577078] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.598087] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.598551] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.600220] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.608786] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.617373] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.623789] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.631241] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.638451] usb usb1: Product: xHCI Host Controller [ 6.643641] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.649941] usb usb1: SerialNumber: 3610000.xhci [ 6.655597] hub 1-0:1.0: USB hub found [ 6.658234] hub 1-0:1.0: 4 ports detected [ 6.663133] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.667687] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.675515] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.683319] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.691084] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.698393] usb usb2: Product: xHCI Host Controller [ 6.703059] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.709279] usb usb2: SerialNumber: 3610000.xhci [ 6.714755] hub 2-0:1.0: USB hub found [ 6.717770] hub 2-0:1.0: 4 ports detected [ 6.761811] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.768941] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.770564] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.770928] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.784205] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.785307] tegra194-cpufreq ccplex: probed with BWMGR [ 6.786675] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.787128] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.787609] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.788916] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.796327] tegra194-vi5 15c10000.vi: initialized [ 6.797094] mmc0: CQHCI version 5.10 [ 6.797860] tegradc 15210000.display: disp0 connected to head1->sor [ 6.799406] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.801508] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.808054] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.814946] tegradc 15210000.display: DT parsed successfully [ 6.823115] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.826439] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.828799] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.835169] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.843128] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.850747] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.850753] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.877096] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.877123] generic_infoframe_type: 0x87 [ 6.883307] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.883315] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.900957] tegradc 15200000.display: DT parsed successfully [ 6.906826] tegradc 15200000.display: Display dc.000000009c8f1c61 registered with id=0 [ 6.915994] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.916465] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.922848] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.930564] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.937431] nvethernet 2490000.ethernet: Macsec not supported [ 6.951309] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.960033] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.960227] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.965643] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.974565] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.980014] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.985264] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.003362] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.004128] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 7.011381] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.017775] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 7.020014] tegradc 15200000.display: probed [ 7.021606] mmc0: Command Queue Engine enabled [ 7.021611] mmc0: periodic cache flush enabled [ 7.021624] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.022063] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.022227] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.025716] tegra-se-nvhost 15810000.se: initialized [ 7.025978] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.081152] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.082823] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.089083] Console: switching to colour frame buffer device 240x67 [ 7.089497] tegra-se-nvhost 15820000.se: initialized [ 7.094875] tegradc 15200000.display: fb registered [ 7.094970] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.101452] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.105320] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.106084] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.106091] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.106096] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.106100] usb 1-2: Manufacturer: Generic [ 7.108049] hub 1-2:1.0: USB hub found [ 7.109100] hub 1-2:1.0: 4 ports detected [ 7.110989] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.122161] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.131351] tegra-se-nvhost 15830000.se: initialized [ 7.173314] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.178631] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.185141] tegra-se-nvhost 15840000.se: initialized [ 7.191004] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.197417] tegra_actmon d230000.actmon: in actmon_register()... [ 7.201564] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.207167] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.215460] hvc_sysfs: hypervisor is not present [ 7.223827] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.228679] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.247756] ALSA device list: [ 7.247847] No soundcards found. [ 7.249122] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.249644] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.258276] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.260947] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.264791] Extcon AUX1(HDMI) enable [ 7.264931] tegradc 15210000.display: disp1 connected to head1->sor [ 7.272933] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.272939] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.272961] usb 2-3: Manufacturer: Generic [ 7.283844] hub 2-3:1.0: USB hub found [ 7.290600] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.296976] hub 2-3:1.0: 4 ports detected [ 7.299342] tegradc 15210000.display: DT parsed successfully [ 7.320086] tegradc 15210000.display: Display dc.00000000c2b4b870 registered with id=1 [ 7.328087] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.334191] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.347489] tegradc 15210000.display: probed [ 7.347800] tegradc 15210000.display: fb registered [ 7.352980] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.356848] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.358671] Freeing unused kernel memory: 3968K [ 7.364974] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.374872] tegradc 15210000.display: blank - powerdown [ 7.379876] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.382928] Run /init as init process [ 7.386480] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.394850] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.394856] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.398429] Extcon DP: HPD disabled [ 7.410472] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.410482] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.410491] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.433963] tegradc 15200000.display: blank - powerdown [ 7.479117] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.479121] Extcon AUX1(HDMI) disable [ 7.502386] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.503248] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.516154] tegradc 15200000.display: unblank [ 7.517282] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.517477] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.523680] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.525544] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.529552] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.529555] Extcon AUX1(HDMI) enable [ 7.542303] tegradc 15200000.display: sync windows ret = 247 [ 7.544051] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.566675] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.566680] usb 1-3: Product: Bluetooth Radio [ 7.566684] usb 1-3: Manufacturer: Realtek [ 7.566688] usb 1-3: SerialNumber: 00e04c000001 [ 7.572819] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.574362] Extcon HDMI: HPD enabled [ 7.575791] tegradc 15200000.display: hdmi: plugged [ 7.623978] Root device found: mmcblk0p1 [ 7.627397] Found dev node: /dev/mmcblk0p1 [ 7.663188] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.668704] Rootfs mounted over mmcblk0p1 [ 7.707090] Switching from initrd to actual rootfs [ 7.852679] systemd[1]: System time before build time, advancing clock. [ 7.933396] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.938165] systemd[1]: Detected architecture arm64. [ 7.979253] systemd[1]: Set hostname to . [ 8.152898] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.499373] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.501022] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.506657] systemd[1]: Created slice system-modprobe.slice. [ 8.511322] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.515463] systemd[1]: Created slice User and Session Slice. [ 8.518766] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.523039] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.526239] systemd[1]: Reached target User and Group Name Lookups. [ 8.529312] systemd[1]: Reached target Slices. [ 8.532283] systemd[1]: Reached target Swap. [ 8.536228] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.539789] systemd[1]: Listening on Syslog Socket. [ 8.543251] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.546511] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.550654] systemd[1]: Listening on Journal Audit Socket. [ 8.554150] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.557821] systemd[1]: Listening on Journal Socket. [ 8.561471] systemd[1]: Listening on udev Control Socket. [ 8.564849] systemd[1]: Listening on udev Kernel Socket. [ 8.573936] systemd[1]: Mounting Huge Pages File System... [ 8.584010] systemd[1]: Mounting POSIX Message Queue File System... [ 8.592122] systemd[1]: Mounting RPC Pipe File System... [ 8.600572] systemd[1]: Mounting Kernel Debug File System... [ 8.608911] systemd[1]: Mounting Kernel Trace File System... [ 8.618881] systemd[1]: Starting Journal Service... [ 8.627993] systemd[1]: Starting Set the console keyboard layout... [ 8.636220] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.639732] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.646256] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.654213] systemd[1]: Started Nameserver information manager. [ 8.660670] systemd[1]: Reached target Network (Pre). [ 8.668035] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.669892] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.679783] systemd[1]: Starting Load Kernel Modules... [ 8.687437] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.696448] systemd[1]: Starting udev Coldplug all Devices... [ 8.706481] systemd[1]: Mounted Huge Pages File System. [ 8.710266] systemd[1]: Mounted POSIX Message Queue File System. [ 8.714240] systemd[1]: Mounted RPC Pipe File System. [ 8.716692] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.722932] systemd[1]: Mounted Kernel Debug File System. [ 8.723484] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.726685] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.726693] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.726704] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.726708] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.727392] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.730838] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.731894] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.737322] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.739829] systemd[1]: Mounted Kernel Trace File System. [ 8.747070] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.754251] systemd[1]: nvfb-udev.service: Succeeded. [ 8.758644] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.771024] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.783777] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.785506] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.791793] systemd[1]: Starting Load/Save Random Seed... [ 8.801517] systemd[1]: Starting Create System Users... [ 8.839360] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.839360] [ 8.847868] systemd[1]: Finished Load/Save Random Seed. [ 8.859576] systemd[1]: Finished Create System Users. [ 8.866622] systemd[1]: Finished Load Kernel Modules. [ 8.871032] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.877753] systemd[1]: Mounting Kernel Configuration File System... [ 8.885633] systemd[1]: Started OP-TEE Client Supplicant. [ 8.895714] systemd[1]: Starting Apply Kernel Variables... [ 8.903814] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.914488] systemd[1]: Finished Set the console keyboard layout. [ 8.918732] systemd[1]: Mounted Kernel Configuration File System. [ 10.289875] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.295042] imx219 9-0010: board setup failed [ 10.295143] imx219: probe of 9-0010 failed with error -121 [ 10.306207] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.311389] imx219 10-0010: board setup failed [ 10.311491] imx219: probe of 10-0010 failed with error -121 [ 10.404691] hot-surface-alert cooling state: 0 -> 1 [ 11.107346] using random self ethernet address [ 11.108483] using random host ethernet address [ 11.882083] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.883532] Creating 1 MTD partitions on "spi6.0": [ 11.904869] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.436726] using random self ethernet address [ 12.439079] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.900630] nvidia: loading out-of-tree module taints kernel. [ 30.633276] tegradc 15200000.display: sor_poll_register 0x16: timeout [ 30.633285] tegradc 15200000.display: dc timeout waiting for HEAD MODE = SLEEP [ 59.478460] watchdog: watchdog0: watchdog did not stop! [ 59.955387] Trying to unregister non-registered hwtime source [ 63.014080] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.015607] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.310] I> sdmmc DDR50 mode [0001.328] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.345] W> Cannot find any partition table for 00000003 [0001.347] > PARTITION_MANAGER: Failed to publish partition. [0001.362] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.363] I> Active Boot chain : 0 [0002.034] I> Relocating BR-BCT [0002.036] > DEVICE_PROD: device prod is not initialized. [0002.342] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.343] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.343] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.344] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.344] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.345] I> dram_block larger than 80000000 [0002.347] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.358] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.362] I> found decompressor handler: lz4 [0002.590] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.592] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized noc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 aÿâavfs_clk_platform_post initialized ÿäarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.211] I> Welcome to NVDisp-Init [0003.212] I> NVDisp-Init version: t194-f9ecfedc [0003.212] I> CPU-BL Params @ 0xca020000 [0003.212] I> 0) Base:0x00000000 Size:0x00000000 [0003.213] I> 1) Base:0xc8300000 Size:0x00100000 [0003.213] I> 2) Base:0xc9800000 Size:0x00200000 [0003.213] I> 3) Base:0xc8600000 Size:0x00200000 [0003.216] I> 4) Base:0xc8200000 Size:0x00100000 [0003.220] I> 5) Base:0xc8100000 Size:0x00100000 [0003.225] I> 6) Base:0xc9400000 Size:0x00400000 [0003.229] I> 7) Base:0xc9000000 Size:0x00400000 [0003.234] I> 8) Base:0xc8000000 Size:0x00100000 [0003.238] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.243] I> 10) Base:0xca800000 Size:0x00800000 [0003.247] I> 11) Base:0x40000000 Size:0x00040000 [0003.252] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.256] I> 13) Base:0x40046000 Size:0x00002000 [0003.260] I> 14) Base:0x40048000 Size:0x00002000 [0003.265] I> 15) Base:0xaf000000 Size:0x00004000 [0003.269] I> 16) Base:0x4004a000 Size:0x00002000 [0003.274] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.278] I> 18) Base:0x4004c000 Size:0x00002000 [0003.283] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.287] I> 20) Base:0x4004e000 Size:0x00002000 [0003.292] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.296] I> 22) Base:0x00000000 Size:0x00000000 [0003.301] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.305] I> 24) Base:0xcc000000 Size:0x02000000 [0003.310] I> 25) Base:0x40050000 Size:0x00002000 [0003.314] I> 26) Base:0x40040000 Size:0x00006000 [0003.318] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.323] I> 28) Base:0xc8400000 Size:0x00200000 [0003.327] I> 29) Base:0xc8800000 Size:0x00400000 [0003.332] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.336] I> 31) Base:0x00000000 Size:0x00000000 [0003.341] I> 32) Base:0xf8000000 Size:0x08000000 [0003.345] I> 33) Base:0xce000000 Size:0x2a000000 [0003.350] I> 34) Base:0xcb000000 Size:0x01000000 [0003.354] I> 35) Base:0xae000000 Size:0x01000000 [0003.359] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.363] I> 37) Base:0xca000000 Size:0x00800000 [0003.368] I> 38) Base:0x80000000 Size:0x20000000 [0003.372] I> 39) Base:0xb0000000 Size:0x08000000 [0003.376] I> 40) Base:0x00000000 Size:0x00000000 [0003.381] I> 41) Base:0x00000000 Size:0x00000000 [0003.385] I> 42) Base:0x00000000 Size:0x00000000 [0003.390] I> 43) Base:0x00000000 Size:0x00000000 [0003.394] I> 44) Base:0x00000000 Size:0x00000000 [0003.399] I> 45) Base:0x00000000 Size:0x00000000 [0003.403] GIC-SPI Target CPU: 0 [0003.406] Interrupts Init done [0003.409] calling constructors [0003.412] initializing heap [0003.415] I> Heap: [0xa0960000 ... 0xadf00000] [0003.419] initializing threads [0003.422] initializing timers [0003.425] creating bootstrap completion thread [0003.429] top of bootstrap2() [0003.432] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.436] initializing platform [0003.439] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.445] W> device prod register failed [0003.448] I> Bl_dtb @0xadf00000 [0003.451] I> gpio framework initialized [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.473] I> fixed regulator driver initialized [0003.491] I> register 'maxim' power off handle [0003.494] I> virtual i2c enabled [0003.494] I> registered 'maxim,max20024' pmic [0003.494] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.495] I> Boot-device: QSPI [0003.496] I> Boot_device: QSPI_FLASH instance: 0 [0003.500] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.511] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.518] I> QSPI source rate = 204000 Khz [0003.521] I> Requested rate for QSPI clock = 34000 Khz [0003.526] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.531] I> tx_clk_tap_delay : 0 [0003.534] I> rx_clk_tap_delay : 16 [0003.537] I> QSPI Flash Size = 32 MB [0003.545] I> Qspi initialized successfully [0003.545] I> qspi flash-0 params source = boot args [0003.550] W> No board IDs available [0003.553] E> Failed to get board id info! [0003.558] I> sdmmc-3 params source = safe params [0003.566] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.567] W> Cannot find any partition table for 00000003 [0003.572] E> Failed to publish 00000003 [0003.576] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.607] W> set volts not configured for 'vdd-1v0' [0003.612] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.647] I> edid read success [0003.647] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.648] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.649] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.681] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 4096, height = 2160, frequency = 296703296 [0003.721] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.732] I> hdmi_enable, starting HDMI initialisation [0003.737] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.747] calling apps_init() [0003.748] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000029] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000659] Console: colour dummy device 80x25 [ 0.002048] printk: console [tty0] enabled [ 0.002108] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002142] pid_max: default: 32768 minimum: 301 [ 0.002418] LSM: Security Framework initializing [ 0.002489] Yama: becoming mindful. [ 0.002542] SELinux: Initializing. [ 0.002784] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002823] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005739] rcu: Hierarchical SRCU implementation. [ 0.005988] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006929] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006977] DTB Build time: Aug 10 2022 20:31:49 [ 0.009883] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010168] Remapping and enabling EFI services. [ 0.012262] smp: Bringing up secondary CPUs ... [ 0.047837] Detected PIPT I-cache on CPU1 [ 0.047943] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.081626] Detected PIPT I-cache on CPU2 [ 0.081723] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.111409] Detected PIPT I-cache on CPU3 [ 0.111556] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.141323] Detected PIPT I-cache on CPU4 [ 0.141518] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.171205] Detected PIPT I-cache on CPU5 [ 0.171364] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.171762] smp: Brought up 1 node, 6 CPUs [ 0.171905] SMP: Total of 6 processors activated. [ 0.171920] CPU features: detected: Privileged Access Never [ 0.171932] CPU features: detected: LSE atomic instructions [ 0.171944] CPU features: detected: User Access Override [ 0.171957] CPU features: detected: 32-bit EL0 Support [ 0.171969] CPU features: detected: RAS Extension Support [ 0.171982] CPU features: detected: CRC32 instructions [ 0.171994] CPU features: detected: 32-bit EL1 Support [ 0.244834] CPU: All CPU(s) started at EL2 [ 0.250863] devtmpfs: initialized [ 0.297198] Registered cp15_barrier emulation handler [ 0.297365] Registered setend emulation handler [ 0.297385] KASLR enabled [ 0.297656] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.297681] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.299043] pinctrl core: initialized pinctrl subsystem [ 0.300037] SMBIOS 3.0.0 present. [ 0.300079] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.300769] NET: Registered protocol family 16 [ 0.302743] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.303255] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.303977] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.304050] audit: initializing netlink subsys (disabled) [ 0.304304] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.304753] thermal_sys: Registered thermal governor 'step_wise' [ 0.304760] thermal_sys: Registered thermal governor 'power_allocator' [ 0.304773] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.306896] cpuidle: using governor menu [ 0.307262] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.307752] ASID allocator initialised with 32768 entries [ 0.308031] Serial: AMBA PL011 UART driver [ 0.311359] Tegra reboot handler registered. [ 0.380018] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.380199] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.380476] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.380522] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.380646] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.380683] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.380807] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.380850] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.381006] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.381060] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.383305] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.383356] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.383397] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.383437] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.383479] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.383519] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.383566] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.383611] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.383644] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.383687] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.383711] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.383773] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.383811] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.383854] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.383878] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.383900] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.383923] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.384016] mc-err: mcerr ops are set to t19x [ 0.396742] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.396767] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.396779] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.396790] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.403111] ACPI: Interpreter disabled. [ 0.404374] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.405699] iommu: Default domain type: Translated [ 0.405769] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.406131] SCSI subsystem initialized [ 0.406309] usbcore: registered new interface driver usbfs [ 0.406357] usbcore: registered new interface driver hub [ 0.406392] usbcore: registered new device driver usb [ 0.406847] mc: Linux media interface: v0.10 [ 0.406879] videodev: Linux video capture interface: v2.00 [ 0.407232] pps_core: LinuxPPS API ver. 1 registered [ 0.407243] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.407266] PTP clock support registered [ 0.407500] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.407868] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.407967] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.408695] Registered efivars operations [ 0.414027] FPGA manager framework [ 0.414148] Advanced Linux Sound Architecture Driver Initialized. [ 0.414753] Bluetooth: Core ver 2.22 [ 0.414812] NET: Registered protocol family 31 [ 0.414826] Bluetooth: HCI device and connection manager initialized [ 0.414841] Bluetooth: HCI socket layer initialized [ 0.414856] Bluetooth: L2CAP socket layer initialized [ 0.414900] Bluetooth: SCO socket layer initialized [ 0.416532] camchar: rtcpu character device driver loaded [ 0.417551] clocksource: Switched to clocksource arch_sys_counter [ 0.778421] VFS: Disk quotas dquot_6.6.0 [ 0.778491] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.778835] pnp: PnP ACPI: disabled [ 0.789147] la/ptsa driver initialized. [ 0.789289] NET: Registered protocol family 2 [ 0.789449] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.794711] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.794800] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.795128] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.795559] TCP: Hash tables configured (established 65536 bind 65536) [ 0.795701] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.795796] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.795970] NET: Registered protocol family 1 [ 0.796760] RPC: Registered named UNIX socket transport module. [ 0.796788] RPC: Registered udp transport module. [ 0.796802] RPC: Registered tcp transport module. [ 0.796816] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.796855] PCI: CLS 0 bytes, default 64 [ 0.797156] Trying to unpack rootfs image as initramfs... [ 1.062194] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.065247] Freeing initrd memory: 8196K [ 1.070396] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.070461] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.070498] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.070848] kvm [1]: IPA Size Limit: 40 bits [ 1.071316] kvm [1]: vgic interrupt IRQ9 [ 1.071842] kvm [1]: VHE mode initialized successfully [ 1.073714] Initialise system trusted keyrings [ 1.074064] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.081342] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.082325] NFS: Registering the id_resolver key type [ 1.082362] Key type id_resolver registered [ 1.082377] Key type id_legacy registered [ 1.082471] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.082494] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.082534] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.092483] NET: Registered protocol family 38 [ 1.092508] Key type asymmetric registered [ 1.092524] Asymmetric key parser 'x509' registered [ 1.092574] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.092883] io scheduler mq-deadline registered [ 1.092903] io scheduler kyber registered [ 1.099002] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.101819] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.101897] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.101965] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.102031] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.102096] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.108230] scrncapt: init (heads:4 wins:6 planes:4) [ 1.108295] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.109466] EINJ: ACPI disabled. [ 1.112891] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.112942] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.112958] tegra-pmc: ### PMC reset level: L1 [ 1.112970] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.113048] tegra-pmc: PMC Prod config success [ 1.118097] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.123864] random: fast init done [ 1.124066] printk: console [ttyTCU0] enabled [ 2.675923] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.680227] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.684825] arm-smmu 10000000.iommu: stage 1 translation [ 2.690617] arm-smmu 10000000.iommu: stage 2 translation [ 2.695812] arm-smmu 10000000.iommu: nested translation [ 2.701381] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.708554] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.720001] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.721393] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.728237] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.735746] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.741272] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.745995] arm-smmu 12000000.iommu: stage 1 translation [ 2.751247] arm-smmu 12000000.iommu: stage 2 translation [ 2.756928] arm-smmu 12000000.iommu: nested translation [ 2.762103] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.769282] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.780613] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.782658] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.789008] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.796618] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.806256] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.809675] tegra_profiler: auth: init [ 2.813864] THERMAL EST: found 3 subdevs [ 2.817286] THERMAL EST num_resources: 0 [ 2.821160] [THERMAL EST subdev 0] [ 2.824482] [THERMAL EST subdev 1] [ 2.827634] [THERMAL EST subdev 2] [ 2.831196] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.837405] THERMAL EST: thz register success. [ 2.841595] THERMAL EST: end of probe, return err: 0 [ 2.847220] nvsciipc: loaded module [ 2.854332] tun: Universal TUN/TAP device driver, 1.6 [ 2.856611] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.862905] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.868204] e1000e: Intel(R) PRO/1000 Network Driver [ 2.873398] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.879477] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.884511] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.890697] PPP generic driver version 2.4.2 [ 2.895209] PPP BSD Compression module registered [ 2.899745] PPP Deflate Compression module registered [ 2.905002] PPP MPPE Compression module registered [ 2.909754] usbcore: registered new interface driver r8152 [ 2.915513] usbcore: registered new interface driver asix [ 2.920593] usbcore: registered new interface driver ax88179_178a [ 2.926713] usbcore: registered new interface driver cdc_ether [ 2.932918] usbcore: registered new interface driver net1080 [ 2.938521] usbcore: registered new interface driver cdc_subset [ 2.944310] usbcore: registered new interface driver zaurus [ 2.950018] usbcore: registered new interface driver cdc_ncm [ 2.955677] usbcore: registered new interface driver aqc111 [ 2.961592] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.967391] ohci-pci: OHCI PCI platform driver [ 2.971694] ohci-platform: OHCI generic platform driver [ 2.977582] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.984169] usbcore: registered new interface driver uas [ 2.988257] usbcore: registered new interface driver usb-storage [ 2.994147] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.000374] mousedev: PS/2 mouse device common for all mice [ 3.005399] usbcore: registered new interface driver xpad [ 3.013225] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.015921] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.023946] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.030310] i2c /dev entries driver [ 3.033523] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.039459] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.045253] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.050276] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.055433] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.060981] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.066650] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.080240] device-mapper: uevent: version 1.0.3 [ 3.080707] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.086886] cpuidle: Initializing cpuidle driver [ 3.091011] sdhci: Secure Digital Host Controller Interface driver [ 3.095751] sdhci: Copyright(c) Pierre Ossman [ 3.099846] Synopsys Designware Multimedia Card Interface Driver [ 3.106073] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.112000] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.112932] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.125261] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.145770] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.155189] vdd-1v0: supplied by regulator-dummy [ 3.160727] vdd-1v8-hs: supplied by regulator-dummy [ 3.165572] vdd-1v8-ls: supplied by regulator-dummy [ 3.170434] vdd-1v8-ao: supplied by regulator-dummy [ 3.174399] vddio-ddr-1v1: supplied by regulator-dummy [ 3.179067] vdd-rtc: supplied by regulator-dummy [ 3.180904] spmic-ldo1: supplied by regulator-dummy [ 3.182182] vdd-ao-3v3: supplied by regulator-dummy [ 3.188423] vddio-emmc-3v3: supplied by regulator-dummy [ 3.194921] spmic-ldo4: supplied by regulator-dummy [ 3.196195] vdd-usb-3v3: supplied by regulator-dummy [ 3.202399] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.208642] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.214311] spmic-ldo8: supplied by vdd-1v8-ls [ 3.215802] gpio-510 (gpio_default): hogged as output/high [ 3.217228] gpio-511 (gpio_default): hogged as output/high [ 3.220089] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.357848] max77686-rtc max77620-rtc: registered as rtc0 [ 3.359232] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.359571] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.202563] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.203605] hid: raw HID events driver (C) Jiri Kosina [ 4.204269] usbcore: registered new interface driver usbhid [ 4.204408] usbhid: USB HID core driver [ 4.206110] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.207230] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.273754] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.349352] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.407 ms) ÿá[ 4.292680] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.293338] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.294619] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.295320] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.297135] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.297799] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.298366] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.299677] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.299911] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.301383] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.308600] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.315115] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.320639] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.326454] denver_knobs_init:MTS_VERSION:55637613 [ 4.339338] t19x_cache tegra-cache: probed [ 4.341820] optee: probing for conduit method. [ 4.342592] optee: revision 3.16 (65cc2218) [ 4.343488] optee: dynamic shared memory is enabled [ 4.347582] optee: initialized driver [ 4.353795] nvpmodel: initialized successfully [ 4.355157] tegra_hv: get_hvd: not initialized yet [ 4.359883] user_ivc_mempool: hypervisor not present [ 4.365840] usbcore: registered new interface driver snd-usb-audio [ 4.372260] u32 classifier [ 4.373685] input device check on [ 4.377319] Actions configured [ 4.380855] Initializing XFRM netlink socket [ 4.385711] NET: Registered protocol family 10 [ 4.391727] Segment Routing with IPv6 [ 4.392988] NET: Registered protocol family 17 [ 4.397543] NET: Registered protocol family 15 [ 4.401656] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.415288] Bluetooth: RFCOMM socket layer initialized [ 4.420019] Bluetooth: RFCOMM ver 1.11 [ 4.423828] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.429689] Bluetooth: HIDP socket layer initialized [ 4.435595] 9pnet: Installing 9P2000 support [ 4.439122] Key type dns_resolver registered [ 4.444738] registered taskstats version 1 [ 4.447826] Loading compiled-in X.509 certificates [ 4.460009] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.463453] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.473301] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.475575] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.484301] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.492563] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.609582] tegra194-pcie 14160000.pcie: Link up [ 4.612230] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.612450] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.612574] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.612772] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.612938] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.613261] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.613703] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.623943] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.624540] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.625036] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.626617] pci 0004:01:00.0: supports D1 D2 [ 4.626762] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.635610] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.636069] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.636298] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.636695] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.636960] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.638402] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.644504] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.651955] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.660573] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.670378] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.675194] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.680431] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.687444] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.697065] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.698338] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.706455] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.715275] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.821658] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.822413] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.822645] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.822796] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.823092] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.823296] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.823673] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.824119] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.839836] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.840247] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.842349] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.843758] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.845368] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.847091] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.848139] pci 0005:00:00.0: Removing from iommu group 7 [ 5.848449] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.879554] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.901830] host1x 13e10000.host1x: initialized [ 5.903296] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.904176] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.905246] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.906068] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.907059] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.907647] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.908623] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.909155] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.914992] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.921619] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.931525] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.938943] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.948892] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.955556] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.965408] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.972460] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.982657] falcon 15340000.vic: Adding to iommu group 17 [ 5.996988] falcon 15340000.vic: initialized [ 5.998137] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.004428] falcon 15380000.nvjpg: initialized [ 6.005095] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.015318] falcon 154c0000.nvenc: initialized [ 6.015948] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.024749] falcon 15a80000.nvenc1: initialized [ 6.025284] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.038893] nvdec 15480000.nvdec: initialized [ 6.039541] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.049745] nvdec 15140000.nvdec1: initialized [ 6.050518] tsec 15500000.tsec: Adding to iommu group 18 [ 6.056151] tsec 15500000.tsec: initialized [ 6.056735] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.062544] tsec 15100000.tsecb: initialized [ 6.066238] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.092557] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.104166] gpio-374 (wifi-enable): hogged as output/high [ 6.104476] gpio-431 (camera-control-output-low): hogged as output/low [ 6.104786] gpio-432 (camera-control-output-low): hogged as output/low [ 6.106694] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.108580] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.109106] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.113982] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.119057] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.125109] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.130812] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.139031] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.146376] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.157847] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.163303] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.168906] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.177880] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.187237] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.194396] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.202046] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.208085] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.217650] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.224012] pva 16000000.pva0: Adding to iommu group 22 [ 6.250897] pva 16000000.pva0: initialized [ 6.255895] pva 16800000.pva1: Adding to iommu group 23 [ 6.274059] pva 16800000.pva1: initialized [ 6.278791] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.292537] nvdla 15880000.nvdla0: initialized [ 6.293942] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.302350] nvdla 158c0000.nvdla1: initialized [ 6.304557] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.304791] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.304826] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.305050] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.305383] tegradccommon 15200000.display-hub: dma mapping done [ 6.306271] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.306931] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.306950] tegradc 15200000.display: Adding to iommu group 26 [ 6.307678] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.307982] tegradc 15210000.display: Adding to iommu group 26 [ 6.316464] tegradc 15210000.display: disp0 connected to head1->sor [ 6.318970] tegra_cec 3960000.tegra_cec: probed [ 6.326200] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.332353] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.336275] tegradc 15210000.display: DT parsed successfully [ 6.345355] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.348688] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.349828] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.355006] kfuse 3830000.kfuse: initialized [ 6.361435] generic_infoframe_type: 0x87 [ 6.369885] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.375627] tegradc 15200000.display: DT parsed successfully [ 6.380081] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.380668] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.383932] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.391529] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.425728] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.427246] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.433915] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.433919] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.448171] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.456729] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.461757] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.471501] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.483476] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.483951] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.504228] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.509939] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.513681] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.526349] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.531971] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.540149] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.548380] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.555429] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.562900] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.569865] usb usb1: Product: xHCI Host Controller [ 6.575048] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.581234] usb usb1: SerialNumber: 3610000.xhci [ 6.586838] hub 1-0:1.0: USB hub found [ 6.589630] hub 1-0:1.0: 4 ports detected [ 6.594102] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.598966] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.606570] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.614285] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.622391] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.629627] usb usb2: Product: xHCI Host Controller [ 6.634365] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.640891] usb usb2: SerialNumber: 3610000.xhci [ 6.646613] hub 2-0:1.0: USB hub found [ 6.649037] hub 2-0:1.0: 4 ports detected [ 6.689957] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.695873] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.697252] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.697507] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.711292] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.712325] tegra194-cpufreq ccplex: probed with BWMGR [ 6.713407] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.714211] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.714712] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.715972] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.723752] tegra194-vi5 15c10000.vi: initialized [ 6.724856] mmc0: CQHCI version 5.10 [ 6.725145] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.726304] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.726522] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.732866] generic_infoframe_type: 0x87 [ 6.732897] tegradc 15200000.display: DT parsed successfully [ 6.739161] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.747515] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.751184] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.755601] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.757615] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.763499] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.763505] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.778128] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.786093] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.794304] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.794311] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.800774] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.844350] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.844398] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.849487] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.853577] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.863435] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.870244] nvethernet 2490000.ethernet: Macsec not supported [ 6.871695] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.882138] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.887668] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.894555] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.896939] tegradc 15200000.display: probed [ 6.902472] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.927460] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.934981] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.941777] tegra-se-nvhost 15810000.se: initialized [ 6.941793] mmc0: Command Queue Engine enabled [ 6.949445] mmc0: periodic cache flush enabled [ 6.949687] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.953886] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.954394] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.960865] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.971429] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.985231] Console: switching to colour frame buffer device 240x67 [ 6.985397] tegra-se-nvhost 15820000.se: initialized [ 6.990727] tegradc 15200000.display: fb registered [ 6.990803] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.999187] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.013367] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.019393] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.019984] tegra-se-nvhost 15830000.se: initialized [ 7.029897] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.036848] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.042000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.042552] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.056841] tegra-se-nvhost 15840000.se: initialized [ 7.061150] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.062894] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.069399] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.069404] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.069407] usb 1-2: Manufacturer: Generic [ 7.091939] hub 1-2:1.0: USB hub found [ 7.093447] tegra_actmon d230000.actmon: in actmon_register()... [ 7.096447] hub 1-2:1.0: 4 ports detected [ 7.101024] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.102130] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.102261] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.106386] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.114283] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.114881] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.122881] hvc_sysfs: hypervisor is not present [ 7.127478] Extcon AUX1(HDMI) enable [ 7.127609] tegradc 15210000.display: disp1 connected to head1->sor [ 7.164923] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.172148] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.179849] tegradc 15210000.display: DT parsed successfully [ 7.185460] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.209353] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.209606] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.209817] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.213749] usb 2-3: Manufacturer: Generic [ 7.219431] ALSA device list: [ 7.219877] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.220995] No soundcards found. [ 7.230398] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.243073] hub 2-3:1.0: USB hub found [ 7.243610] tegradc 15210000.display: probed [ 7.245200] tegradc 15210000.display: fb registered [ 7.250374] hub 2-3:1.0: 4 ports detected [ 7.253796] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.257322] Freeing unused kernel memory: 3968K [ 7.261642] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.274167] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.277702] Run /init as init process [ 7.282668] tegradc 15210000.display: blank - powerdown ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.287732] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.287759] Extcon DP: HPD disabled [ 7.287807] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.287818] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.287823] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.287850] tegradc 15200000.display: blank - powerdown [ 7.329577] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.329584] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.334741] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.334746] Extcon AUX1(HDMI) disable [ 7.357698] random: crng init done [ 7.358161] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.359000] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.370634] tegradc 15200000.display: unblank [ 7.371665] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.371854] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.377607] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.379511] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.383548] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.383551] Extcon AUX1(HDMI) enable [ 7.394119] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.394124] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.396276] tegradc 15200000.display: sync windows ret = 247 [ 7.444574] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.451425] Extcon HDMI: HPD enabled [ 7.455268] tegradc 15200000.display: hdmi: plugged [ 7.482891] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.484543] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.486054] usb 1-3: Product: Bluetooth Radio [ 7.487456] usb 1-3: Manufacturer: Realtek [ 7.488829] usb 1-3: SerialNumber: 00e04c000001 [ 7.496891] Root device found: mmcblk0p1 [ 7.500194] Found dev node: /dev/mmcblk0p1 [ 7.536302] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.541963] Rootfs mounted over mmcblk0p1 [ 7.585162] Switching from initrd to actual rootfs [ 7.728273] systemd[1]: System time before build time, advancing clock. [ 7.799002] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.803947] systemd[1]: Detected architecture arm64. [ 7.863466] systemd[1]: Set hostname to . [ 8.029930] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.380334] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.382114] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.387646] systemd[1]: Created slice system-modprobe.slice. [ 8.392202] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.396622] systemd[1]: Created slice User and Session Slice. [ 8.400069] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.404258] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.407602] systemd[1]: Reached target User and Group Name Lookups. [ 8.410785] systemd[1]: Reached target Slices. [ 8.413850] systemd[1]: Reached target Swap. [ 8.417845] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.421463] systemd[1]: Listening on Syslog Socket. [ 8.424959] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.429584] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.435140] systemd[1]: Listening on Journal Audit Socket. [ 8.438689] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.442434] systemd[1]: Listening on Journal Socket. [ 8.446116] systemd[1]: Listening on udev Control Socket. [ 8.449621] systemd[1]: Listening on udev Kernel Socket. [ 8.458132] systemd[1]: Mounting Huge Pages File System... [ 8.466380] systemd[1]: Mounting POSIX Message Queue File System... [ 8.474392] systemd[1]: Mounting RPC Pipe File System... [ 8.483218] systemd[1]: Mounting Kernel Debug File System... [ 8.491892] systemd[1]: Mounting Kernel Trace File System... [ 8.502239] systemd[1]: Starting Journal Service... [ 8.511162] systemd[1]: Starting Set the console keyboard layout... [ 8.519409] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.522861] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.529699] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.537931] systemd[1]: Started Nameserver information manager. [ 8.542649] systemd[1]: Reached target Network (Pre). [ 8.549755] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.551560] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.557788] systemd[1]: Starting Load Kernel Modules... [ 8.565463] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.573834] systemd[1]: Starting udev Coldplug all Devices... [ 8.585058] systemd[1]: Mounted Huge Pages File System. [ 8.588896] systemd[1]: Mounted POSIX Message Queue File System. [ 8.592477] systemd[1]: Mounted RPC Pipe File System. [ 8.594196] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.600042] systemd[1]: Mounted Kernel Debug File System. [ 8.600817] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.603715] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.603721] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.603729] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.603732] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.604003] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.604173] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.604340] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.614759] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.615490] systemd[1]: Mounted Kernel Trace File System. [ 8.628196] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.635222] systemd[1]: nvfb-udev.service: Succeeded. [ 8.639415] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.651909] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.663335] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.665103] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.673443] systemd[1]: Starting Load/Save Random Seed... [ 8.681652] systemd[1]: Starting Create System Users... [ 8.716278] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.716278] [ 8.727362] systemd[1]: Finished Load/Save Random Seed. [ 8.745694] systemd[1]: Finished Create System Users. [ 8.752646] systemd[1]: Finished Load Kernel Modules. [ 8.757442] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.763936] systemd[1]: Mounting Kernel Configuration File System... [ 8.771413] systemd[1]: Started OP-TEE Client Supplicant. [ 8.781129] systemd[1]: Starting Apply Kernel Variables... [ 8.789866] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.800110] systemd[1]: Finished Set the console keyboard layout. [ 8.807741] systemd[1]: Mounted Kernel Configuration File System. [ 10.219510] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.226918] imx219 9-0010: board setup failed [ 10.228128] imx219: probe of 9-0010 failed with error -121 [ 10.240362] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.246989] imx219 10-0010: board setup failed [ 10.248580] imx219: probe of 10-0010 failed with error -121 [ 10.351145] hot-surface-alert cooling state: 0 -> 1 [ 10.569065] using random self ethernet address [ 10.570561] using random host ethernet address [ 11.906670] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.908320] Creating 1 MTD partitions on "spi6.0": [ 11.908330] 0x000000000000-0x000002000000 : "Whole_flash0" [ 11.922834] using random self ethernet address [ 11.927508] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.841954] nvidia: loading out-of-tree module taints kernel. [ 59.003751] watchdog: watchdog0: watchdog did not stop! [ 59.475229] Trying to unregister non-registered hwtime source [ 62.536808] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.538907] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr bõÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23:ÿâdmce initialized cvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized entering main console loop ] extras_post initialized bpmp: init complete ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.324] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.382] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.421] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.491] I> register 'maxim' power off handle [0003.495] I> virtual i2c enabled [0003.495] I> registered 'maxim,max20024' pmic [0003.495] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.496] I> Boot-device: QSPI [0003.496] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.612] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.619] E> invalid display type [0003.620] E> cannot find any other nvdisp nodes [0003.636] I> edid read success [0003.648] I> edid read success [0003.649] I> width = 640, height = 480, frequency = 25174825 [0003.649] I> width = 1920, height = 1080, frequency = 148500000 [0003.650] I> width = 1280, height = 768, frequency = 79500000 [0003.650] I> width = 1360, height = 768, frequency = 85500000 [0003.650] I> width = 720, height = 480, frequency = 26973026 [0003.654] I> width = 720, height = 576, frequency = 26973026 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 720, height = 480, frequency = 26973026 [0003.688] I> width = 720, height = 576, frequency = 26973026 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.734] I> hdmi_enable, starting HDMI initialisation [0003.739] I> hdmi_enable, HDMI initialisation complete [0003.748] initializing target [0003.749] calling apps_init() [0003.749] starting app kernel_boot_app [0003.750] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000736] Console: colour dummy device 80x25 [ 0.002088] printk: console [tty0] enabled [ 0.002151] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002185] pid_max: default: 32768 minimum: 301 [ 0.002425] LSM: Security Framework initializing [ 0.002484] Yama: becoming mindful. [ 0.002525] SELinux: Initializing. [ 0.002686] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002722] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005797] rcu: Hierarchical SRCU implementation. [ 0.006042] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007003] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007053] DTB Build time: Aug 10 2022 20:31:49 [ 0.009728] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009965] Remapping and enabling EFI services. [ 0.011792] smp: Bringing up secondary CPUs ... [ 0.043677] Detected PIPT I-cache on CPU1 [ 0.043774] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073451] Detected PIPT I-cache on CPU2 [ 0.073595] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103143] Detected PIPT I-cache on CPU3 [ 0.103314] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133035] Detected PIPT I-cache on CPU4 [ 0.133188] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162908] Detected PIPT I-cache on CPU5 [ 0.163013] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163296] smp: Brought up 1 node, 6 CPUs [ 0.163482] SMP: Total of 6 processors activated. [ 0.163568] CPU features: detected: Privileged Access Never [ 0.163593] CPU features: detected: LSE atomic instructions [ 0.163613] CPU features: detected: User Access Override [ 0.163633] CPU features: detected: 32-bit EL0 Support [ 0.163669] CPU features: detected: RAS Extension Support [ 0.163695] CPU features: detected: CRC32 instructions [ 0.163713] CPU features: detected: 32-bit EL1 Support [ 0.234740] CPU: All CPU(s) started at EL2 [ 0.240599] devtmpfs: initialized [ 0.291017] Registered cp15_barrier emulation handler [ 0.291149] Registered setend emulation handler [ 0.291169] KASLR enabled [ 0.291439] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291462] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292817] pinctrl core: initialized pinctrl subsystem [ 0.293813] SMBIOS 3.0.0 present. [ 0.293842] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294392] NET: Registered protocol family 16 [ 0.296306] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296811] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297540] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297603] audit: initializing netlink subsys (disabled) [ 0.297860] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.298315] thermal_sys: Registered thermal governor 'step_wise' [ 0.298322] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298336] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300488] cpuidle: using governor menu [ 0.300867] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.301275] ASID allocator initialised with 32768 entries [ 0.301543] Serial: AMBA PL011 UART driver [ 0.305799] Tegra reboot handler registered. [ 0.377196] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.377404] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.377578] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.377656] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.377808] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.377912] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.378049] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.378118] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.378270] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.378312] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.380590] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.380629] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.380660] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.380689] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.380719] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.380755] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.380787] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.380812] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.380837] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.380867] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.380891] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.380932] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.380957] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.380997] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.381021] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.381064] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.381088] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.381176] mc-err: mcerr ops are set to t19x [ 0.393312] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.393346] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.393360] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.393373] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.400011] ACPI: Interpreter disabled. [ 0.401194] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.402621] iommu: Default domain type: Translated [ 0.402705] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.403125] SCSI subsystem initialized [ 0.403283] usbcore: registered new interface driver usbfs [ 0.403320] usbcore: registered new interface driver hub [ 0.403368] usbcore: registered new device driver usb [ 0.403790] mc: Linux media interface: v0.10 [ 0.403818] videodev: Linux video capture interface: v2.00 [ 0.404108] pps_core: LinuxPPS API ver. 1 registered [ 0.404120] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.404146] PTP clock support registered [ 0.404379] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404689] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.404772] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.405380] Registered efivars operations [ 0.410934] FPGA manager framework [ 0.411058] Advanced Linux Sound Architecture Driver Initialized. [ 0.411690] Bluetooth: Core ver 2.22 [ 0.411755] NET: Registered protocol family 31 [ 0.411766] Bluetooth: HCI device and connection manager initialized [ 0.411783] Bluetooth: HCI socket layer initialized [ 0.411800] Bluetooth: L2CAP socket layer initialized [ 0.411835] Bluetooth: SCO socket layer initialized [ 0.414398] camchar: rtcpu character device driver loaded [ 0.415458] clocksource: Switched to clocksource arch_sys_counter [ 0.812905] VFS: Disk quotas dquot_6.6.0 [ 0.812991] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.813379] pnp: PnP ACPI: disabled [ 0.826733] la/ptsa driver initialized. [ 0.826879] NET: Registered protocol family 2 [ 0.827096] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.834692] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.834817] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.835170] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.835844] TCP: Hash tables configured (established 65536 bind 65536) [ 0.836053] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.836184] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.836494] NET: Registered protocol family 1 [ 0.837444] RPC: Registered named UNIX socket transport module. [ 0.837470] RPC: Registered udp transport module. [ 0.837485] RPC: Registered tcp transport module. [ 0.837497] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.837546] PCI: CLS 0 bytes, default 64 [ 0.837809] Trying to unpack rootfs image as initramfs... [ 1.098864] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.101968] Freeing initrd memory: 8196K [ 1.106667] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.106702] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.106740] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.107066] kvm [1]: IPA Size Limit: 40 bits [ 1.107602] kvm [1]: vgic interrupt IRQ9 [ 1.108051] kvm [1]: VHE mode initialized successfully [ 1.109477] Initialise system trusted keyrings [ 1.109762] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.115196] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.116105] NFS: Registering the id_resolver key type [ 1.116145] Key type id_resolver registered [ 1.116188] Key type id_legacy registered [ 1.116270] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.116323] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.116360] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.126351] NET: Registered protocol family 38 [ 1.126374] Key type asymmetric registered [ 1.126388] Asymmetric key parser 'x509' registered [ 1.126436] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.126683] io scheduler mq-deadline registered [ 1.126702] io scheduler kyber registered [ 1.132830] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.135855] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.135933] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.136035] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.136140] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.136254] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.141529] scrncapt: init (heads:4 wins:6 planes:4) [ 1.141757] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.142623] EINJ: ACPI disabled. [ 1.145977] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.146004] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.146019] tegra-pmc: ### PMC reset level: L1 [ 1.146032] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.146085] tegra-pmc: PMC Prod config success [ 1.150812] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.156137] random: fast init done [ 1.156659] printk: console [ttyTCU0] enabled [ 2.708518] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.713050] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.717577] arm-smmu 10000000.iommu: stage 1 translation [ 2.723088] arm-smmu 10000000.iommu: stage 2 translation [ 2.728350] arm-smmu 10000000.iommu: nested translation [ 2.733950] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.741125] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.750890] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.753988] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.760814] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.768550] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.773588] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.778308] arm-smmu 12000000.iommu: stage 1 translation [ 2.784080] arm-smmu 12000000.iommu: stage 2 translation [ 2.789243] arm-smmu 12000000.iommu: nested translation [ 2.794927] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.801849] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.811730] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.815205] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.821539] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.829010] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.838866] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.842205] tegra_profiler: auth: init [ 2.846189] THERMAL EST: found 3 subdevs [ 2.849632] THERMAL EST num_resources: 0 [ 2.853728] [THERMAL EST subdev 0] [ 2.856794] [THERMAL EST subdev 1] [ 2.860463] [THERMAL EST subdev 2] [ 2.863432] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.869902] THERMAL EST: thz register success. [ 2.874158] THERMAL EST: end of probe, return err: 0 [ 2.879787] nvsciipc: loaded module [ 2.886855] tun: Universal TUN/TAP device driver, 1.6 [ 2.888977] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.895481] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.900771] e1000e: Intel(R) PRO/1000 Network Driver [ 2.905963] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.912047] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.917338] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.923515] PPP generic driver version 2.4.2 [ 2.927791] PPP BSD Compression module registered [ 2.932077] PPP Deflate Compression module registered [ 2.937303] PPP MPPE Compression module registered [ 2.942580] usbcore: registered new interface driver r8152 [ 2.948100] usbcore: registered new interface driver asix [ 2.953159] usbcore: registered new interface driver ax88179_178a [ 2.959282] usbcore: registered new interface driver cdc_ether [ 2.965489] usbcore: registered new interface driver net1080 [ 2.970830] usbcore: registered new interface driver cdc_subset [ 2.977139] usbcore: registered new interface driver zaurus [ 2.982573] usbcore: registered new interface driver cdc_ncm [ 2.988250] usbcore: registered new interface driver aqc111 [ 2.993922] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.999958] ohci-pci: OHCI PCI platform driver [ 3.004261] ohci-platform: OHCI generic platform driver [ 3.010189] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.016743] usbcore: registered new interface driver uas [ 3.020814] usbcore: registered new interface driver usb-storage [ 3.026757] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.032885] mousedev: PS/2 mouse device common for all mice [ 3.037714] usbcore: registered new interface driver xpad [ 3.046101] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.048464] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.056242] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.062856] i2c /dev entries driver [ 3.066133] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.072033] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.077554] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.082615] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.088203] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.093415] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.098836] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.111398] device-mapper: uevent: version 1.0.3 [ 3.111913] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.119134] cpuidle: Initializing cpuidle driver [ 3.123102] sdhci: Secure Digital Host Controller Interface driver [ 3.128314] sdhci: Copyright(c) Pierre Ossman [ 3.132158] Synopsys Designware Multimedia Card Interface Driver [ 3.138566] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.144534] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.150498] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.157527] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.175292] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.183907] vdd-1v0: supplied by regulator-dummy [ 3.189217] vdd-1v8-hs: supplied by regulator-dummy [ 3.193861] vdd-1v8-ls: supplied by regulator-dummy [ 3.198497] vdd-1v8-ao: supplied by regulator-dummy [ 3.202248] vddio-ddr-1v1: supplied by regulator-dummy [ 3.206631] vdd-rtc: supplied by regulator-dummy [ 3.208199] spmic-ldo1: supplied by regulator-dummy [ 3.209342] vdd-ao-3v3: supplied by regulator-dummy [ 3.215385] vddio-emmc-3v3: supplied by regulator-dummy [ 3.221491] spmic-ldo4: supplied by regulator-dummy [ 3.222636] vdd-usb-3v3: supplied by regulator-dummy [ 3.229076] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.235121] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.240491] spmic-ldo8: supplied by vdd-1v8-ls [ 3.241862] gpio-510 (gpio_default): hogged as output/high [ 3.244298] gpio-511 (gpio_default): hogged as output/high [ 3.251402] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.389503] max77686-rtc max77620-rtc: registered as rtc0 [ 3.390427] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.390703] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.080360] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.081618] hid: raw HID events driver (C) Jiri Kosina [ 4.082398] usbcore: registered new interface driver usbhid [ 4.082547] usbhid: USB HID core driver [ 4.085348] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.086841] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.125080] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.198739] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 74.469 ms) ÿá[ 4.170261] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.170911] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.172169] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.173095] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.175082] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.175780] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.176345] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.177739] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.178119] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.179995] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.186735] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.193118] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.197803] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.204632] denver_knobs_init:MTS_VERSION:55637613 [ 4.218677] t19x_cache tegra-cache: probed [ 4.222943] optee: probing for conduit method. [ 4.223947] optee: revision 3.16 (65cc2218) [ 4.225026] optee: dynamic shared memory is enabled [ 4.226158] optee: initialized driver [ 4.232674] nvpmodel: initialized successfully [ 4.233218] tegra_hv: get_hvd: not initialized yet [ 4.237472] user_ivc_mempool: hypervisor not present [ 4.243774] usbcore: registered new interface driver snd-usb-audio [ 4.249680] u32 classifier [ 4.251430] input device check on [ 4.255271] Actions configured [ 4.258611] Initializing XFRM netlink socket [ 4.263504] NET: Registered protocol family 10 [ 4.271050] Segment Routing with IPv6 [ 4.271427] NET: Registered protocol family 17 [ 4.275232] NET: Registered protocol family 15 [ 4.279568] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.293336] Bluetooth: RFCOMM socket layer initialized [ 4.298003] Bluetooth: RFCOMM ver 1.11 [ 4.301738] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.307799] Bluetooth: HIDP socket layer initialized [ 4.313608] 9pnet: Installing 9P2000 support [ 4.317226] Key type dns_resolver registered [ 4.322458] registered taskstats version 1 [ 4.325599] Loading compiled-in X.509 certificates [ 4.337695] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.341239] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.351448] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.353329] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.362120] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.370247] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.487574] tegra194-pcie 14160000.pcie: Link up [ 4.490516] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.490732] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.491061] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.491334] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.491599] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.491972] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.492418] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.505770] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.506350] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.506885] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.508505] pci 0004:01:00.0: supports D1 D2 [ 4.508654] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.519989] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.520413] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.520691] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.521197] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.521470] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.521647] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.522393] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.529913] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.538091] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.548717] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.552837] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.558853] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.565404] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.574761] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.576135] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.584529] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.593234] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.708372] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.709261] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.709734] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.709902] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.710218] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.710387] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.710840] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.711555] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.731414] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.731836] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.733864] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.735161] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.736900] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.738539] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.739719] pci 0005:00:00.0: Removing from iommu group 7 [ 5.740116] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.774121] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.798571] host1x 13e10000.host1x: initialized [ 5.800056] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.800881] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.802217] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.803072] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.804510] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.805178] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.806380] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.806952] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.808165] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.809577] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.819016] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.825440] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.835286] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.842450] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.852266] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.859749] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.869278] falcon 15340000.vic: Adding to iommu group 17 [ 5.884351] falcon 15340000.vic: initialized [ 5.885311] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.890999] falcon 15380000.nvjpg: initialized [ 5.891700] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.902251] falcon 154c0000.nvenc: initialized [ 5.902831] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.913488] falcon 15a80000.nvenc1: initialized [ 5.914204] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.925408] nvdec 15480000.nvdec: initialized [ 5.926011] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.935913] nvdec 15140000.nvdec1: initialized [ 5.936441] tsec 15500000.tsec: Adding to iommu group 18 [ 5.942322] tsec 15500000.tsec: initialized [ 5.942783] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.950102] tsec 15100000.tsecb: initialized [ 5.954814] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.982466] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.994989] gpio-374 (wifi-enable): hogged as output/high [ 5.995423] gpio-431 (camera-control-output-low): hogged as output/low [ 5.995890] gpio-432 (camera-control-output-low): hogged as output/low [ 5.998074] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.000623] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.001394] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.003053] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.006570] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.012537] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.017527] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.026582] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.032839] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.045238] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.050116] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.055817] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.064638] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.073687] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.081494] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.088614] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.094563] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.104799] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.110737] pva 16000000.pva0: Adding to iommu group 22 [ 6.138805] pva 16000000.pva0: initialized [ 6.144010] pva 16800000.pva1: Adding to iommu group 23 [ 6.156488] pva 16800000.pva1: initialized [ 6.161537] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.176117] nvdla 15880000.nvdla0: initialized [ 6.177466] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.186176] nvdla 158c0000.nvdla1: initialized [ 6.190651] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.190982] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.191075] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.191155] tegradc 15200000.display: Adding to iommu group 26 [ 6.191621] tegradccommon 15200000.display-hub: dma mapping done [ 6.192058] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.193199] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.194567] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.199244] tegradc 15210000.display: Adding to iommu group 26 [ 6.199827] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.199970] generic_infoframe_type: 0x87 [ 6.200062] tegradc 15200000.display: DT parsed successfully [ 6.200195] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.200657] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.207428] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.212495] tegra_cec 3960000.tegra_cec: probed [ 6.216108] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.216159] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.217202] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.222952] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.230157] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.238360] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.245549] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.249142] kfuse 3830000.kfuse: initialized [ 6.260635] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.265754] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.271940] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.276573] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.277242] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.284885] tegradc 15210000.display: disp0 connected to head1->sor [ 6.304851] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.312246] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.319576] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.325579] tegradc 15210000.display: DT parsed successfully [ 6.344102] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.352710] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.389722] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.395043] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.415342] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.415866] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.418072] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.426628] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.435102] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.442046] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.449408] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.456687] usb usb1: Product: xHCI Host Controller [ 6.461359] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.467683] usb usb1: SerialNumber: 3610000.xhci [ 6.473436] hub 1-0:1.0: USB hub found [ 6.476280] hub 1-0:1.0: 4 ports detected [ 6.481018] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.485624] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.493493] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.501278] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.509106] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.516321] usb usb2: Product: xHCI Host Controller [ 6.521073] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.527247] usb usb2: SerialNumber: 3610000.xhci [ 6.532978] hub 2-0:1.0: USB hub found [ 6.536024] hub 2-0:1.0: 4 ports detected [ 6.582028] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.587757] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.589311] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.589516] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.603326] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.604494] tegra194-cpufreq ccplex: probed with BWMGR [ 6.605910] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.606424] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.606913] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.608162] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.615768] tegra194-vi5 15c10000.vi: initialized [ 6.617275] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.617481] generic_infoframe_type: 0x87 [ 6.618739] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.620153] tegradc 15200000.display: DT parsed successfully [ 6.626314] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.628081] mmc0: CQHCI version 5.10 [ 6.632102] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.640097] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.644035] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.649922] random: crng init done [ 6.651653] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.657032] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.658122] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.658126] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.658557] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.666358] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.666368] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.669770] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.683526] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.684257] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.692266] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.692277] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.701796] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.764343] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.764399] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.772299] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.780953] tegradc 15200000.display: probed [ 6.790788] nvethernet 2490000.ethernet: Macsec not supported [ 6.798032] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.805366] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.810031] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.811149] mmc0: Command Queue Engine enabled [ 6.817619] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.821855] mmc0: periodic cache flush enabled [ 6.821899] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.829831] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.839930] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.850378] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.850568] Console: switching to colour frame buffer device 240x67 [ 6.851746] tegra-se-nvhost 15810000.se: initialized [ 6.857380] tegradc 15200000.display: fb registered [ 6.857443] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.862098] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.869242] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.874513] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.879522] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.887265] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.894135] tegra-se-nvhost 15820000.se: initialized [ 6.918288] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.923166] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.929430] tegra-se-nvhost 15830000.se: initialized [ 6.935188] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.940666] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.946840] tegra-se-nvhost 15840000.se: initialized [ 6.953151] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.955252] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.959412] tegra_actmon d230000.actmon: in actmon_register()... [ 6.963912] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.965744] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.987849] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.992658] usb 1-2: Manufacturer: Generic [ 6.996751] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.996906] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.998784] hub 1-2:1.0: USB hub found [ 6.999896] hub 1-2:1.0: 4 ports detected [ 7.004574] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.010315] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.014120] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.018509] hvc_sysfs: hypervisor is not present [ 7.025309] Extcon AUX1(HDMI) enable [ 7.049075] tegradc 15210000.display: disp1 connected to head1->sor [ 7.055304] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.062627] tegradc 15210000.display: DT parsed successfully [ 7.068309] tegradc 15210000.display: Display dc.0000000080976b4a registered with id=1 [ 7.076335] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.095177] ALSA device list: [ 7.095282] No soundcards found. [ 7.095597] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.096064] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.109504] tegradc 15210000.display: probed [ 7.109816] tegradc 15210000.display: fb registered [ 7.115116] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.119086] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.120938] Freeing unused kernel memory: 3968K [ 7.127024] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.135581] Run /init as init process [ 7.140559] tegradc 15210000.display: blank - powerdown [ 7.145900] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.145906] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.145909] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.145913] usb 2-3: Manufacturer: Generic [ 7.169891] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.169895] Extcon DP: HPD disabled [ 7.169928] hpd: switching from state 0 (Reset) to state 1 (Check Plug) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.188427] tegradc 15200000.display: blank - powerdown [ 7.188434] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.188441] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.197328] hub 2-3:1.0: USB hub found [ 7.199170] hub 2-3:1.0: 4 ports detected [ 7.230997] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.231003] Extcon AUX1(HDMI) disable [ 7.231231] Root device found: mmcblk0p1 [ 7.231530] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.231535] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.233313] Found dev node: /dev/mmcblk0p1 [ 7.243502] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.254405] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.255307] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.268499] tegradc 15200000.display: unblank [ 7.268619] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.269649] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.269858] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.272699] Rootfs mounted over mmcblk0p1 [ 7.276108] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.277988] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.281996] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.282000] Extcon AUX1(HDMI) enable [ 7.294760] tegradc 15200000.display: sync windows ret = 247 [ 7.303130] Switching from initrd to actual rootfs [ 7.347096] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.354539] Extcon HDMI: HPD enabled [ 7.358118] tegradc 15200000.display: hdmi: plugged [ 7.392599] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.394108] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.395600] usb 1-3: Product: Bluetooth Radio [ 7.396923] usb 1-3: Manufacturer: Realtek [ 7.398241] usb 1-3: SerialNumber: 00e04c000001 [ 7.513834] systemd[1]: System time before build time, advancing clock. [ 7.587280] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.592235] systemd[1]: Detected architecture arm64. [ 7.639630] systemd[1]: Set hostname to . [ 7.810162] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.166269] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.168049] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.174001] systemd[1]: Created slice system-modprobe.slice. [ 8.178834] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.183116] systemd[1]: Created slice User and Session Slice. [ 8.186596] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.190841] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.194283] systemd[1]: Reached target User and Group Name Lookups. [ 8.197712] systemd[1]: Reached target Slices. [ 8.200879] systemd[1]: Reached target Swap. [ 8.205021] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.208891] systemd[1]: Listening on Syslog Socket. [ 8.212590] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.216173] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.220588] systemd[1]: Listening on Journal Audit Socket. [ 8.224350] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.229220] systemd[1]: Listening on Journal Socket. [ 8.234454] systemd[1]: Listening on udev Control Socket. [ 8.238166] systemd[1]: Listening on udev Kernel Socket. [ 8.247070] systemd[1]: Mounting Huge Pages File System... [ 8.255980] systemd[1]: Mounting POSIX Message Queue File System... [ 8.264052] systemd[1]: Mounting RPC Pipe File System... [ 8.272759] systemd[1]: Mounting Kernel Debug File System... [ 8.281447] systemd[1]: Mounting Kernel Trace File System... [ 8.291666] systemd[1]: Starting Journal Service... [ 8.300771] systemd[1]: Starting Set the console keyboard layout... [ 8.308963] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.312611] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.318927] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.327144] systemd[1]: Started Nameserver information manager. [ 8.331500] systemd[1]: Reached target Network (Pre). [ 8.338876] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.341372] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.351308] systemd[1]: Starting Load Kernel Modules... [ 8.358922] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.367942] systemd[1]: Starting udev Coldplug all Devices... [ 8.378101] systemd[1]: Mounted Huge Pages File System. [ 8.382049] systemd[1]: Mounted POSIX Message Queue File System. [ 8.385745] systemd[1]: Mounted RPC Pipe File System. [ 8.389780] systemd[1]: Mounted Kernel Debug File System. [ 8.390841] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.390879] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.395236] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.395242] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.395251] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.395254] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.395484] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.395693] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.395849] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.395860] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.411522] systemd[1]: Mounted Kernel Trace File System. [ 8.417695] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.423386] systemd[1]: nvfb-udev.service: Succeeded. [ 8.427500] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.436771] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.449933] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.451682] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.459873] systemd[1]: Starting Load/Save Random Seed... [ 8.467867] systemd[1]: Starting Create System Users... [ 8.478938] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.478938] [ 8.512824] systemd[1]: Finished Load Kernel Modules. [ 8.517352] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.523853] systemd[1]: Mounting Kernel Configuration File System... [ 8.532786] systemd[1]: Started OP-TEE Client Supplicant. [ 8.540713] systemd[1]: Starting Apply Kernel Variables... [ 8.551180] systemd[1]: Finished Load/Save Random Seed. [ 8.557692] systemd[1]: Finished Create System Users. [ 8.561563] systemd[1]: Mounted Kernel Configuration File System. [ 8.573502] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.928252] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.933470] imx219 9-0010: board setup failed [ 9.933575] imx219: probe of 9-0010 failed with error -121 [ 9.944584] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.950992] imx219 10-0010: board setup failed [ 9.952312] imx219: probe of 10-0010 failed with error -121 [ 10.070561] hot-surface-alert cooling state: 0 -> 1 [ 10.620718] using random self ethernet address [ 10.629576] using random host ethernet address [ 11.749166] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.749173] Creating 1 MTD partitions on "spi6.0": [ 11.749181] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.374814] using random self ethernet address [ 12.376368] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.845156] nvidia: loading out-of-tree module taints kernel. [ 58.637535] watchdog: watchdog0: watchdog did not stop! [ 59.124447] Trying to unregister non-registered hwtime source [ 62.190620] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.192289] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR]àÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 67500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TCÿâmail_early initialized ÿä: ÿâfuse initialized hwwdt initialized ÿäNon-ÿât194_ec_get_ec_list: found 45 ecs ÿäsecure exteÿâec initialized ÿärÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿänaÿâadc initialized ÿälÿâfmon_populate_monitors: found 73 monitors ÿä DT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNING: Tÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿähis OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.605] W> set volts not configured for 'vdd-1v8-hs' [0003.606] I> retrieved tmds range from prod_list_hdmi_soc [0003.610] E> invalid display type [0003.611] E> cannot find any other nvdisp nodes [0003.627] I> edid read success [0003.640] I> edid read success [0003.640] I> width = 640, height = 480, frequency = 25174825 [0003.640] I> width = 1920, height = 1080, frequency = 148500000 [0003.641] I> width = 1280, height = 768, frequency = 79500000 [0003.641] I> width = 1360, height = 768, frequency = 85500000 [0003.642] I> width = 720, height = 480, frequency = 26973026 [0003.646] I> width = 720, height = 576, frequency = 26973026 [0003.651] I> width = 1280, height = 720, frequency = 74175824 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1920, height = 1080, frequency = 148351648 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 720, height = 480, frequency = 26973026 [0003.679] I> width = 720, height = 576, frequency = 26973026 [0003.685] I> width = 3840, height = 2160, frequency = 296703296 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 4096, height = 2160, frequency = 296703296 [0003.714] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.725] I> hdmi_enable, starting HDMI initialisation [0003.730] I> hdmi_enable, HDMI initialisation complete [0003.739] initializing target [0003.740] calling apps_init() [0003.740] starting app kernel_boot_app [0003.741] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000652] Console: colour dummy device 80x25 [ 0.002060] printk: console [tty0] enabled [ 0.002121] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002157] pid_max: default: 32768 minimum: 301 [ 0.002315] LSM: Security Framework initializing [ 0.002376] Yama: becoming mindful. [ 0.002412] SELinux: Initializing. [ 0.002554] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002590] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005431] rcu: Hierarchical SRCU implementation. [ 0.005726] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006595] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006652] DTB Build time: Aug 10 2022 20:31:49 [ 0.009503] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009737] Remapping and enabling EFI services. [ 0.011834] smp: Bringing up secondary CPUs ... [ 0.041044] Detected PIPT I-cache on CPU1 [ 0.041102] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070583] Detected PIPT I-cache on CPU2 [ 0.070730] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100165] Detected PIPT I-cache on CPU3 [ 0.100313] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130030] Detected PIPT I-cache on CPU4 [ 0.130129] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.159780] Detected PIPT I-cache on CPU5 [ 0.160002] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160338] smp: Brought up 1 node, 6 CPUs [ 0.160544] SMP: Total of 6 processors activated. [ 0.160610] CPU features: detected: Privileged Access Never [ 0.160636] CPU features: detected: LSE atomic instructions [ 0.160649] CPU features: detected: User Access Override [ 0.160663] CPU features: detected: 32-bit EL0 Support [ 0.160676] CPU features: detected: RAS Extension Support [ 0.160688] CPU features: detected: CRC32 instructions [ 0.160701] CPU features: detected: 32-bit EL1 Support [ 0.229225] CPU: All CPU(s) started at EL2 [ 0.235559] devtmpfs: initialized [ 0.307270] Registered cp15_barrier emulation handler [ 0.307404] Registered setend emulation handler [ 0.307440] KASLR enabled [ 0.307780] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.307817] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.309919] pinctrl core: initialized pinctrl subsystem [ 0.311239] SMBIOS 3.0.0 present. [ 0.311288] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.312116] NET: Registered protocol family 16 [ 0.314830] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.315568] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.316607] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.316694] audit: initializing netlink subsys (disabled) [ 0.317100] audit: type=2000 audit(0.312:1): state=initialized audit_enabled=0 res=1 [ 0.317770] thermal_sys: Registered thermal governor 'step_wise' [ 0.317778] thermal_sys: Registered thermal governor 'power_allocator' [ 0.317799] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.321086] cpuidle: using governor menu [ 0.321567] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.322100] ASID allocator initialised with 32768 entries [ 0.322520] Serial: AMBA PL011 UART driver [ 0.327556] Tegra reboot handler registered. [ 0.421920] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.422076] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.422334] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.422387] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.422616] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.422670] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.422846] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.422894] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.423058] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.423106] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.426374] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.426420] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.426458] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.426495] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.426534] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.426570] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.426621] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.426689] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.426723] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.426776] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.426809] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.426859] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.426891] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.426923] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.426957] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.426997] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.427030] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.427151] mc-err: mcerr ops are set to t19x [ 0.444385] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.444414] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.444432] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.444448] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.452404] ACPI: Interpreter disabled. [ 0.453920] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.455734] iommu: Default domain type: Translated [ 0.455824] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.456399] SCSI subsystem initialized [ 0.456601] usbcore: registered new interface driver usbfs [ 0.456656] usbcore: registered new interface driver hub [ 0.456703] usbcore: registered new device driver usb [ 0.457231] mc: Linux media interface: v0.10 [ 0.457275] videodev: Linux video capture interface: v2.00 [ 0.457719] pps_core: LinuxPPS API ver. 1 registered [ 0.457737] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.457767] PTP clock support registered [ 0.458043] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.458380] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.458464] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.459240] Registered efivars operations [ 0.465334] FPGA manager framework [ 0.465461] Advanced Linux Sound Architecture Driver Initialized. [ 0.466348] Bluetooth: Core ver 2.22 [ 0.466423] NET: Registered protocol family 31 [ 0.466440] Bluetooth: HCI device and connection manager initialized [ 0.466460] Bluetooth: HCI socket layer initialized [ 0.466477] Bluetooth: L2CAP socket layer initialized [ 0.466504] Bluetooth: SCO socket layer initialized [ 0.468209] camchar: rtcpu character device driver loaded [ 0.469045] clocksource: Switched to clocksource arch_sys_counter [ 0.875553] VFS: Disk quotas dquot_6.6.0 [ 0.875676] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.876064] pnp: PnP ACPI: disabled [ 0.890967] la/ptsa driver initialized. [ 0.891172] NET: Registered protocol family 2 [ 0.891439] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.899994] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.900095] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.900452] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.901121] TCP: Hash tables configured (established 65536 bind 65536) [ 0.901280] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.901414] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.901681] NET: Registered protocol family 1 [ 0.902433] RPC: Registered named UNIX socket transport module. [ 0.902464] RPC: Registered udp transport module. [ 0.902478] RPC: Registered tcp transport module. [ 0.902491] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.902514] PCI: CLS 0 bytes, default 64 [ 0.902839] Trying to unpack rootfs image as initramfs... [ 1.175088] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.178664] Freeing initrd memory: 8196K [ 1.182800] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.182835] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.182871] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.183248] kvm [1]: IPA Size Limit: 40 bits [ 1.183928] kvm [1]: vgic interrupt IRQ9 [ 1.184511] kvm [1]: VHE mode initialized successfully [ 1.186037] Initialise system trusted keyrings [ 1.186417] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.192543] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.193420] NFS: Registering the id_resolver key type [ 1.193456] Key type id_resolver registered [ 1.193470] Key type id_legacy registered [ 1.193563] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.193587] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.193655] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.203895] NET: Registered protocol family 38 [ 1.203918] Key type asymmetric registered [ 1.203933] Asymmetric key parser 'x509' registered [ 1.204008] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.204320] io scheduler mq-deadline registered [ 1.204338] io scheduler kyber registered [ 1.209726] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.212376] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.212454] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.212523] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.212590] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.212687] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.218107] scrncapt: init (heads:4 wins:6 planes:4) [ 1.218144] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.219253] EINJ: ACPI disabled. [ 1.222475] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.222500] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.222514] tegra-pmc: ### PMC reset level: L1 [ 1.222527] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.222573] tegra-pmc: PMC Prod config success [ 1.227728] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.246245] random: fast init done [ 1.256220] printk: console [ttyTCU0] enabled [ 2.785061] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.789695] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.794298] arm-smmu 10000000.iommu: stage 1 translation [ 2.800082] arm-smmu 10000000.iommu: stage 2 translation [ 2.805516] arm-smmu 10000000.iommu: nested translation [ 2.810611] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.818035] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.828224] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.831156] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.837456] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.845068] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.850752] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.855482] arm-smmu 12000000.iommu: stage 1 translation [ 2.860729] arm-smmu 12000000.iommu: stage 2 translation [ 2.866414] arm-smmu 12000000.iommu: nested translation [ 2.871586] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.878773] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.889108] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.891869] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.898714] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.905901] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.915579] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.918900] tegra_profiler: auth: init [ 2.923137] THERMAL EST: found 3 subdevs [ 2.926797] THERMAL EST num_resources: 0 [ 2.930648] [THERMAL EST subdev 0] [ 2.933964] [THERMAL EST subdev 1] [ 2.937118] [THERMAL EST subdev 2] [ 2.940601] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.947142] THERMAL EST: thz register success. [ 2.951318] THERMAL EST: end of probe, return err: 0 [ 2.956377] nvsciipc: loaded module [ 2.963407] tun: Universal TUN/TAP device driver, 1.6 [ 2.966187] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.972139] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.977686] e1000e: Intel(R) PRO/1000 Network Driver [ 2.982874] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.988700] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.994249] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.000392] PPP generic driver version 2.4.2 [ 3.004664] PPP BSD Compression module registered [ 3.009226] PPP Deflate Compression module registered [ 3.014214] PPP MPPE Compression module registered [ 3.019234] usbcore: registered new interface driver r8152 [ 3.025020] usbcore: registered new interface driver asix [ 3.030077] usbcore: registered new interface driver ax88179_178a [ 3.036452] usbcore: registered new interface driver cdc_ether [ 3.042148] usbcore: registered new interface driver net1080 [ 3.047741] usbcore: registered new interface driver cdc_subset [ 3.054043] usbcore: registered new interface driver zaurus [ 3.059742] usbcore: registered new interface driver cdc_ncm [ 3.065414] usbcore: registered new interface driver aqc111 [ 3.070805] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.076873] ohci-pci: OHCI PCI platform driver [ 3.081437] ohci-platform: OHCI generic platform driver [ 3.086987] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.093400] usbcore: registered new interface driver uas [ 3.097723] usbcore: registered new interface driver usb-storage [ 3.103611] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.109794] mousedev: PS/2 mouse device common for all mice [ 3.114666] usbcore: registered new interface driver xpad [ 3.122883] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.125640] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.133185] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.139699] i2c /dev entries driver [ 3.143061] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.149125] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.154353] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.159566] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.164872] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.170648] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.176110] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.189414] device-mapper: uevent: version 1.0.3 [ 3.189839] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.196272] cpuidle: Initializing cpuidle driver [ 3.200408] sdhci: Secure Digital Host Controller Interface driver [ 3.205000] sdhci: Copyright(c) Pierre Ossman [ 3.209329] Synopsys Designware Multimedia Card Interface Driver [ 3.215300] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.221454] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.222343] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.234761] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.254169] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.264214] vdd-1v0: supplied by regulator-dummy [ 3.269701] vdd-1v8-hs: supplied by regulator-dummy [ 3.274574] vdd-1v8-ls: supplied by regulator-dummy [ 3.279387] vdd-1v8-ao: supplied by regulator-dummy [ 3.283337] vddio-ddr-1v1: supplied by regulator-dummy [ 3.287794] vdd-rtc: supplied by regulator-dummy [ 3.289570] spmic-ldo1: supplied by regulator-dummy [ 3.290781] vdd-ao-3v3: supplied by regulator-dummy [ 3.296885] vddio-emmc-3v3: supplied by regulator-dummy [ 3.303348] spmic-ldo4: supplied by regulator-dummy [ 3.304547] vdd-usb-3v3: supplied by regulator-dummy [ 3.310723] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.317065] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.322546] spmic-ldo8: supplied by vdd-1v8-ls [ 3.324001] gpio-510 (gpio_default): hogged as output/high [ 3.325406] gpio-511 (gpio_default): hogged as output/high [ 3.328328] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.467680] max77686-rtc max77620-rtc: registered as rtc0 [ 3.469112] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.469479] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.291215] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.292303] hid: raw HID events driver (C) Jiri Kosina [ 4.293139] usbcore: registered new interface driver usbhid [ 4.293289] usbhid: USB HID core driver [ 4.295392] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.296870] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.375397] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.449629] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.041 ms) ÿá[ 4.381242] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.381927] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.383124] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.383862] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.385880] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.386586] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.387272] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.389104] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.389318] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.391917] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.397911] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.404001] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.409533] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.415512] denver_knobs_init:MTS_VERSION:55637613 [ 4.427062] t19x_cache tegra-cache: probed [ 4.429961] optee: probing for conduit method. [ 4.430839] optee: revision 3.16 (65cc2218) [ 4.432043] optee: dynamic shared memory is enabled [ 4.436376] optee: initialized driver [ 4.442947] nvpmodel: initialized successfully [ 4.443559] tegra_hv: get_hvd: not initialized yet [ 4.448276] user_ivc_mempool: hypervisor not present [ 4.454743] usbcore: registered new interface driver snd-usb-audio [ 4.460907] u32 classifier [ 4.462291] input device check on [ 4.466071] Actions configured [ 4.469441] Initializing XFRM netlink socket [ 4.474295] NET: Registered protocol family 10 [ 4.481343] Segment Routing with IPv6 [ 4.481731] NET: Registered protocol family 17 [ 4.486133] NET: Registered protocol family 15 [ 4.490374] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.503989] Bluetooth: RFCOMM socket layer initialized [ 4.508810] Bluetooth: RFCOMM ver 1.11 [ 4.512459] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.518565] Bluetooth: HIDP socket layer initialized [ 4.524190] 9pnet: Installing 9P2000 support [ 4.527751] Key type dns_resolver registered [ 4.533809] registered taskstats version 1 [ 4.536397] Loading compiled-in X.509 certificates [ 4.549492] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.552180] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.562069] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.564349] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.572716] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.581325] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.697157] tegra194-pcie 14160000.pcie: Link up [ 4.700148] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.700496] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.700832] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.701080] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.701455] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.702138] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.702881] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.714817] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.715569] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.716199] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.717844] pci 0004:01:00.0: supports D1 D2 [ 4.718165] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.728347] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.728757] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.729118] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.729692] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.729947] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.730243] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.731928] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.739084] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.747622] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.757622] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.762340] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.768400] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.774976] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.784329] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.785680] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.794362] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.802625] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.917674] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.918370] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.918570] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.918749] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.919064] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.919262] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.919692] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.920118] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.940098] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.940356] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.942220] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.943644] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.945187] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.946567] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.947620] pci 0005:00:00.0: Removing from iommu group 7 [ 5.948109] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.985895] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.008865] host1x 13e10000.host1x: initialized [ 6.010555] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.011329] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.012537] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.013389] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.014523] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.015189] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.016179] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.016822] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.017920] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.018592] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.028011] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.034726] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.044846] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.051445] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.061584] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.068674] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.078425] falcon 15340000.vic: Adding to iommu group 17 [ 6.093577] falcon 15340000.vic: initialized [ 6.094680] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.100148] falcon 15380000.nvjpg: initialized [ 6.100701] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.111301] falcon 154c0000.nvenc: initialized [ 6.111775] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.122188] falcon 15a80000.nvenc1: initialized [ 6.122897] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.134285] nvdec 15480000.nvdec: initialized [ 6.134808] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.144480] nvdec 15140000.nvdec1: initialized [ 6.144968] tsec 15500000.tsec: Adding to iommu group 18 [ 6.150479] tsec 15500000.tsec: initialized [ 6.150917] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.158840] tsec 15100000.tsecb: initialized [ 6.162556] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.189426] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.202370] gpio-374 (wifi-enable): hogged as output/high [ 6.202658] gpio-431 (camera-control-output-low): hogged as output/low [ 6.202908] gpio-432 (camera-control-output-low): hogged as output/low [ 6.204337] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.206146] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.206676] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.209845] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.215500] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.221345] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.226618] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.235005] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.242596] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.254759] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.258810] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.264663] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.273792] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.283117] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.290127] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.297785] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.303820] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.313750] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.319989] pva 16000000.pva0: Adding to iommu group 22 [ 6.346200] pva 16000000.pva0: initialized [ 6.346431] random: crng init done [ 6.350390] pva 16800000.pva1: Adding to iommu group 23 [ 6.361745] pva 16800000.pva1: initialized [ 6.365281] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.379883] nvdla 15880000.nvdla0: initialized [ 6.381437] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.390026] nvdla 158c0000.nvdla1: initialized [ 6.393774] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.394059] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.394141] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.394408] tegradccommon 15200000.display-hub: dma mapping done [ 6.394876] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.395136] tegradc 15200000.display: Adding to iommu group 26 [ 6.396195] tegradc 15210000.display: Adding to iommu group 26 [ 6.400806] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.407675] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.413899] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.419297] generic_infoframe_type: 0x87 [ 6.424647] tegra_cec 3960000.tegra_cec: probed [ 6.425672] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.429043] tegradc 15200000.display: DT parsed successfully [ 6.433920] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.439410] tegradc 15200000.display: Display dc.00000000305e3ef0 registered with id=0 [ 6.446959] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.454503] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.459416] kfuse 3830000.kfuse: initialized [ 6.465577] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.465586] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.466548] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.474537] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.478347] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.479703] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.486575] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.487199] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.497560] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.513186] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.525488] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.531769] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.538541] tegradc 15210000.display: disp0 connected to head1->sor [ 6.544043] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.552298] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.560370] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.565325] tegradc 15210000.display: DT parsed successfully [ 6.572191] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.580368] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.628064] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.628464] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.630651] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.639109] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.647887] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.654481] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.662075] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.669550] usb usb1: Product: xHCI Host Controller [ 6.674171] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.680554] usb usb1: SerialNumber: 3610000.xhci [ 6.686493] hub 1-0:1.0: USB hub found [ 6.689324] hub 1-0:1.0: 4 ports detected [ 6.694019] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.698625] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.705958] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.713723] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.721777] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.728821] usb usb2: Product: xHCI Host Controller [ 6.734013] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.740264] usb usb2: SerialNumber: 3610000.xhci [ 6.745605] hub 2-0:1.0: USB hub found [ 6.748688] hub 2-0:1.0: 4 ports detected [ 6.789727] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.795300] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.796550] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.796767] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.809811] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.810931] tegra194-cpufreq ccplex: probed with BWMGR [ 6.812202] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.812638] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.813162] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.814275] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.823585] tegra194-vi5 15c10000.vi: initialized [ 6.824030] mmc0: CQHCI version 5.10 [ 6.825311] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.825909] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.826132] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.832306] generic_infoframe_type: 0x87 [ 6.832383] tegradc 15200000.display: DT parsed successfully [ 6.838618] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.846921] tegradc 15200000.display: Display dc.00000000d06f5c80 registered with id=0 [ 6.850664] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.862671] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.870894] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.877523] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.885682] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.892368] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.907094] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.921012] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.921050] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.927478] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.927773] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.933952] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.959206] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.959727] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.967353] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.973038] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.973746] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.975870] tegradc 15200000.display: probed [ 6.999774] nvethernet 2490000.ethernet: Macsec not supported [ 7.006830] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 7.014815] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 7.019583] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.026626] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.034627] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.042669] tegra-se-nvhost 15810000.se: initialized [ 7.046780] mmc0: Command Queue Engine enabled [ 7.048897] mmc0: periodic cache flush enabled [ 7.048913] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.049302] Console: switching to colour frame buffer device 240x67 [ 7.049494] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.049730] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.049991] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.050779] tegra-se-nvhost 15820000.se: initialized [ 7.052300] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.052479] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.053197] tegra-se-nvhost 15830000.se: initialized [ 7.053375] tegradc 15200000.display: fb registered [ 7.053445] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.054217] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.054414] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.055089] tegra-se-nvhost 15840000.se: initialized [ 7.056560] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.058157] tegra_actmon d230000.actmon: in actmon_register()... [ 7.058318] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.058654] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.059227] hvc_sysfs: hypervisor is not present [ 7.059773] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.088363] ALSA device list: [ 7.089634] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.089842] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.105918] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.110247] No soundcards found. [ 7.140927] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.148944] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.150543] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.160026] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.163215] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.163226] usb 1-2: Manufacturer: Generic [ 7.170388] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.175574] hub 1-2:1.0: USB hub found [ 7.180509] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.186940] hub 1-2:1.0: 4 ports detected [ 7.193463] Extcon AUX1(HDMI) enable [ 7.193589] tegradc 15210000.display: disp1 connected to head1->sor [ 7.257870] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.261450] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.285783] tegradc 15210000.display: DT parsed successfully [ 7.291577] tegradc 15210000.display: Display dc.000000005295c859 registered with id=1 [ 7.298550] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.299447] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.307829] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.314040] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.320967] usb 2-3: Product: 4-Port USB 3.0 Hub ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.331907] usb 2-3: Manufacturer: Generic [ 7.332016] tegradc 15200000.display: blank - powerdown [ 7.333748] tegradc 15210000.display: probed [ 7.342419] hub 2-3:1.0: USB hub found [ 7.344560] hub 2-3:1.0: 4 ports detected [ 7.365986] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.365990] Extcon AUX1(HDMI) disable [ 7.389226] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.390104] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.400894] tegradc 15200000.display: unblank [ 7.401953] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.402161] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.407843] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.409761] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.413717] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.413720] Extcon AUX1(HDMI) enable [ 7.417051] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.426539] tegradc 15200000.display: sync windows ret = 247 [ 7.456215] tegradc 15210000.display: fb registered [ 7.457662] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.459079] Extcon HDMI: HPD enabled [ 7.459638] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.460373] tegradc 15200000.display: hdmi: plugged [ 7.461803] Freeing unused kernel memory: 3968K [ 7.461892] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.478279] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.483355] tegradc 15210000.display: blank - powerdown [ 7.488783] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.489040] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.496827] Extcon DP: HPD disabled [ 7.496832] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.496840] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.496846] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.506774] Run /init as init process [ 7.566206] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.566265] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.567753] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.570873] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.572401] usb 1-3: Product: Bluetooth Radio [ 7.573940] usb 1-3: Manufacturer: Realtek [ 7.575331] usb 1-3: SerialNumber: 00e04c000001 [ 7.587017] Root device found: mmcblk0p1 [ 7.590532] Found dev node: /dev/mmcblk0p1 [ 7.626890] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.632286] Rootfs mounted over mmcblk0p1 [ 7.667694] Switching from initrd to actual rootfs [ 7.840372] systemd[1]: System time before build time, advancing clock. [ 7.909739] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.914749] systemd[1]: Detected architecture arm64. [ 7.964942] systemd[1]: Set hostname to . [ 8.127670] systemd-sysv-generator[249]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.478526] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.480321] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.485951] systemd[1]: Created slice system-modprobe.slice. [ 8.490609] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.494792] systemd[1]: Created slice User and Session Slice. [ 8.498454] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.502652] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.506095] systemd[1]: Reached target User and Group Name Lookups. [ 8.509349] systemd[1]: Reached target Slices. [ 8.512525] systemd[1]: Reached target Swap. [ 8.516577] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.521683] systemd[1]: Listening on Syslog Socket. [ 8.526678] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.530282] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.534574] systemd[1]: Listening on Journal Audit Socket. [ 8.538269] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.542184] systemd[1]: Listening on Journal Socket. [ 8.546051] systemd[1]: Listening on udev Control Socket. [ 8.549634] systemd[1]: Listening on udev Kernel Socket. [ 8.557857] systemd[1]: Mounting Huge Pages File System... [ 8.565978] systemd[1]: Mounting POSIX Message Queue File System... [ 8.573795] systemd[1]: Mounting RPC Pipe File System... [ 8.582416] systemd[1]: Mounting Kernel Debug File System... [ 8.591115] systemd[1]: Mounting Kernel Trace File System... [ 8.600848] systemd[1]: Starting Journal Service... [ 8.609745] systemd[1]: Starting Set the console keyboard layout... [ 8.618167] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.621837] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.628122] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.636757] systemd[1]: Started Nameserver information manager. [ 8.641972] systemd[1]: Reached target Network (Pre). [ 8.649465] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.651430] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.657669] systemd[1]: Starting Load Kernel Modules... [ 8.665629] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.673902] systemd[1]: Starting udev Coldplug all Devices... [ 8.684355] systemd[1]: Mounted Huge Pages File System. [ 8.688289] systemd[1]: Mounted POSIX Message Queue File System. [ 8.692147] systemd[1]: Mounted RPC Pipe File System. [ 8.697149] systemd[1]: Mounted Kernel Debug File System. [ 8.697593] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.699180] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.702713] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.702719] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.702728] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.702733] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.704410] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.704627] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.712147] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.712160] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.719669] systemd[1]: Mounted Kernel Trace File System. [ 8.726470] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.732663] systemd[1]: nvfb-udev.service: Succeeded. [ 8.737326] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.750094] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.763209] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.765687] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.772866] systemd[1]: Starting Load/Save Random Seed... [ 8.781526] systemd[1]: Starting Create System Users... [ 8.813038] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.813038] [ 8.828586] systemd[1]: Finished Load/Save Random Seed. [ 8.841088] systemd[1]: Finished Load Kernel Modules. [ 8.847991] systemd[1]: Finished Create System Users. [ 8.852588] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.859287] systemd[1]: Mounting Kernel Configuration File System... [ 8.867377] systemd[1]: Started OP-TEE Client Supplicant. [ 8.875585] systemd[1]: Starting Apply Kernel Variables... [ 8.883699] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.893667] systemd[1]: Finished Set the console keyboard layout. [ 8.900762] systemd[1]: Mounted Kernel Configuration File System. [ 10.257618] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.264118] imx219 9-0010: board setup failed [ 10.264210] imx219: probe of 9-0010 failed with error -121 [ 10.276769] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.288277] imx219 10-0010: board setup failed [ 10.288450] imx219: probe of 10-0010 failed with error -121 [ 10.338741] hot-surface-alert cooling state: 0 -> 1 [ 11.077853] using random self ethernet address [ 11.077859] using random host ethernet address [ 11.738928] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.738935] Creating 1 MTD partitions on "spi6.0": [ 11.738944] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.604602] using random self ethernet address [ 12.606237] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.825689] nvidia: loading out-of-tree module taints kernel. [ 59.478990] watchdog: watchdog0: watchdog did not stop! [ 59.982671] Trying to unregister non-registered hwtime source [ 63.041173] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.043215] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, grÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.309] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.344] W> Cannot find any partition table for 00000003 [0001.345] > PARTITION_MANAGER: Failed to publish partition. [0001.361] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.362] I> Active Boot chain : 0 [0002.033] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.340] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.341] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.342] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.343] I> dram_block larger than 80000000 [0002.345] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.360] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized noc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuratioÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿän might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.211] I> Welcome to NVDisp-Init [0003.211] I> NVDisp-Init version: t194-f9ecfedc [0003.212] I> CPU-BL Params @ 0xca020000 [0003.212] I> 0) Base:0x00000000 Size:0x00000000 [0003.212] I> 1) Base:0xc8300000 Size:0x00100000 [0003.213] I> 2) Base:0xc9800000 Size:0x00200000 [0003.213] I> 3) Base:0xc8600000 Size:0x00200000 [0003.216] I> 4) Base:0xc8200000 Size:0x00100000 [0003.220] I> 5) Base:0xc8100000 Size:0x00100000 [0003.224] I> 6) Base:0xc9400000 Size:0x00400000 [0003.229] I> 7) Base:0xc9000000 Size:0x00400000 [0003.233] I> 8) Base:0xc8000000 Size:0x00100000 [0003.238] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.242] I> 10) Base:0xca800000 Size:0x00800000 [0003.247] I> 11) Base:0x40000000 Size:0x00040000 [0003.251] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.256] I> 13) Base:0x40046000 Size:0x00002000 [0003.260] I> 14) Base:0x40048000 Size:0x00002000 [0003.265] I> 15) Base:0xaf000000 Size:0x00004000 [0003.269] I> 16) Base:0x4004a000 Size:0x00002000 [0003.274] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.278] I> 18) Base:0x4004c000 Size:0x00002000 [0003.282] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.287] I> 20) Base:0x4004e000 Size:0x00002000 [0003.291] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.296] I> 22) Base:0x00000000 Size:0x00000000 [0003.300] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.305] I> 24) Base:0xcc000000 Size:0x02000000 [0003.309] I> 25) Base:0x40050000 Size:0x00002000 [0003.314] I> 26) Base:0x40040000 Size:0x00006000 [0003.318] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.323] I> 28) Base:0xc8400000 Size:0x00200000 [0003.327] I> 29) Base:0xc8800000 Size:0x00400000 [0003.332] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.336] I> 31) Base:0x00000000 Size:0x00000000 [0003.340] I> 32) Base:0xf8000000 Size:0x08000000 [0003.345] I> 33) Base:0xce000000 Size:0x2a000000 [0003.349] I> 34) Base:0xcb000000 Size:0x01000000 [0003.354] I> 35) Base:0xae000000 Size:0x01000000 [0003.358] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.363] I> 37) Base:0xca000000 Size:0x00800000 [0003.367] I> 38) Base:0x80000000 Size:0x20000000 [0003.372] I> 39) Base:0xb0000000 Size:0x08000000 [0003.376] I> 40) Base:0x00000000 Size:0x00000000 [0003.381] I> 41) Base:0x00000000 Size:0x00000000 [0003.385] I> 42) Base:0x00000000 Size:0x00000000 [0003.390] I> 43) Base:0x00000000 Size:0x00000000 [0003.394] I> 44) Base:0x00000000 Size:0x00000000 [0003.399] I> 45) Base:0x00000000 Size:0x00000000 [0003.403] GIC-SPI Target CPU: 0 [0003.406] Interrupts Init done [0003.409] calling constructors [0003.412] initializing heap [0003.414] I> Heap: [0xa0960000 ... 0xadf00000] [0003.419] initializing threads [0003.422] initializing timers [0003.424] creating bootstrap completion thread [0003.429] top of bootstrap2() [0003.431] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.436] initializing platform [0003.439] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.444] W> device prod register failed [0003.448] I> Bl_dtb @0xadf00000 [0003.451] I> gpio framework initialized [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.473] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.491] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.492] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.495] I> Boot_device: QSPI_FLASH instance: 0 [0003.500] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.511] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.518] I> QSPI source rate = 204000 Khz [0003.521] I> Requested rate for QSPI clock = 34000 Khz [0003.526] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.531] I> tx_clk_tap_delay : 0 [0003.534] I> rx_clk_tap_delay : 16 [0003.537] I> QSPI Flash Size = 32 MB [0003.545] I> Qspi initialized successfully [0003.545] I> qspi flash-0 params source = boot args [0003.550] W> No board IDs available [0003.552] E> Failed to get board id info! [0003.558] I> sdmmc-3 params source = safe params [0003.565] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.567] W> Cannot find any partition table for 00000003 [0003.571] E> Failed to publish 00000003 [0003.576] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.609] W> set volts not configured for 'vdd-1v0' [0003.614] W> set volts not configured for 'vdd-1v8-hs' [0003.615] I> retrieved tmds range from prod_list_hdmi_soc [0003.621] E> invalid display type [0003.622] E> cannot find any other nvdisp nodes [0003.638] I> edid read success [0003.650] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.651] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.652] I> width = 720, height = 480, frequency = 26973026 [0003.656] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.690] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.750] initializing target [0003.750] calling apps_init() [0003.751] starting app kernel_boot_app [0003.752] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000762] Console: colour dummy device 80x25 [ 0.002321] printk: console [tty0] enabled [ 0.002389] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002455] pid_max: default: 32768 minimum: 301 [ 0.002661] LSM: Security Framework initializing [ 0.002718] Yama: becoming mindful. [ 0.002780] SELinux: Initializing. [ 0.002955] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002995] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006018] rcu: Hierarchical SRCU implementation. [ 0.006322] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007018] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007088] DTB Build time: Aug 10 2022 20:31:49 [ 0.009786] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010065] Remapping and enabling EFI services. [ 0.012136] smp: Bringing up secondary CPUs ... [ 0.041602] Detected PIPT I-cache on CPU1 [ 0.041703] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071388] Detected PIPT I-cache on CPU2 [ 0.071584] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101199] Detected PIPT I-cache on CPU3 [ 0.101297] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131016] Detected PIPT I-cache on CPU4 [ 0.131164] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160872] Detected PIPT I-cache on CPU5 [ 0.160952] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161257] smp: Brought up 1 node, 6 CPUs [ 0.161497] SMP: Total of 6 processors activated. [ 0.161548] CPU features: detected: Privileged Access Never [ 0.161591] CPU features: detected: LSE atomic instructions [ 0.161606] CPU features: detected: User Access Override [ 0.161621] CPU features: detected: 32-bit EL0 Support [ 0.161637] CPU features: detected: RAS Extension Support [ 0.161652] CPU features: detected: CRC32 instructions [ 0.161666] CPU features: detected: 32-bit EL1 Support [ 0.228008] CPU: All CPU(s) started at EL2 [ 0.233350] devtmpfs: initialized [ 0.285310] Registered cp15_barrier emulation handler [ 0.285459] Registered setend emulation handler [ 0.285481] KASLR enabled [ 0.285732] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285763] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287316] pinctrl core: initialized pinctrl subsystem [ 0.288449] SMBIOS 3.0.0 present. [ 0.288482] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289176] NET: Registered protocol family 16 [ 0.291208] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291713] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292472] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292553] audit: initializing netlink subsys (disabled) [ 0.292851] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.293338] thermal_sys: Registered thermal governor 'step_wise' [ 0.293346] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293364] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295512] cpuidle: using governor menu [ 0.295823] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296252] ASID allocator initialised with 32768 entries [ 0.296488] Serial: AMBA PL011 UART driver [ 0.299878] Tegra reboot handler registered. [ 0.368844] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.369027] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.369205] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.369248] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.369392] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.369433] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.369593] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.369637] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.369768] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.369808] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.372265] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.372303] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.372333] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.372363] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.372393] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.372423] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.372465] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.372497] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.372523] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.372548] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.372572] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.372597] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.372643] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.372668] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.372708] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.372733] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.372773] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.372863] mc-err: mcerr ops are set to t19x [ 0.385157] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.385185] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.385198] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.385210] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.392112] ACPI: Interpreter disabled. [ 0.393306] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.394650] iommu: Default domain type: Translated [ 0.394721] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.395133] SCSI subsystem initialized [ 0.395331] usbcore: registered new interface driver usbfs [ 0.395377] usbcore: registered new interface driver hub [ 0.395434] usbcore: registered new device driver usb [ 0.395843] mc: Linux media interface: v0.10 [ 0.395871] videodev: Linux video capture interface: v2.00 [ 0.396189] pps_core: LinuxPPS API ver. 1 registered [ 0.396205] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.396228] PTP clock support registered [ 0.396482] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.396767] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.396855] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.397476] Registered efivars operations [ 0.402784] FPGA manager framework [ 0.402918] Advanced Linux Sound Architecture Driver Initialized. [ 0.403606] Bluetooth: Core ver 2.22 [ 0.403646] NET: Registered protocol family 31 [ 0.403660] Bluetooth: HCI device and connection manager initialized [ 0.403676] Bluetooth: HCI socket layer initialized [ 0.403692] Bluetooth: L2CAP socket layer initialized [ 0.403714] Bluetooth: SCO socket layer initialized [ 0.405596] camchar: rtcpu character device driver loaded [ 0.406334] clocksource: Switched to clocksource arch_sys_counter [ 0.706294] VFS: Disk quotas dquot_6.6.0 [ 0.706397] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.706832] pnp: PnP ACPI: disabled [ 0.719574] la/ptsa driver initialized. [ 0.719712] NET: Registered protocol family 2 [ 0.719898] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.725579] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.725714] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.725971] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.726435] TCP: Hash tables configured (established 65536 bind 65536) [ 0.726575] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.726664] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.726882] NET: Registered protocol family 1 [ 0.727723] RPC: Registered named UNIX socket transport module. [ 0.727761] RPC: Registered udp transport module. [ 0.727784] RPC: Registered tcp transport module. [ 0.727806] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.727854] PCI: CLS 0 bytes, default 64 [ 0.728166] Trying to unpack rootfs image as initramfs... [ 0.923013] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.925291] Freeing initrd memory: 8196K [ 0.929442] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.929498] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.929566] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.929995] kvm [1]: IPA Size Limit: 40 bits [ 0.930670] kvm [1]: vgic interrupt IRQ9 [ 0.931176] kvm [1]: VHE mode initialized successfully [ 0.932927] Initialise system trusted keyrings [ 0.933302] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.939076] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.939881] NFS: Registering the id_resolver key type [ 0.939918] Key type id_resolver registered [ 0.939933] Key type id_legacy registered [ 0.940056] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.940081] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.940118] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.950605] NET: Registered protocol family 38 [ 0.950631] Key type asymmetric registered [ 0.950647] Asymmetric key parser 'x509' registered [ 0.950694] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.950910] io scheduler mq-deadline registered [ 0.950928] io scheduler kyber registered [ 0.956675] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.959950] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.960065] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.960149] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.960253] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.960328] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.965899] scrncapt: init (heads:4 wins:6 planes:4) [ 0.966074] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.967064] EINJ: ACPI disabled. [ 0.970215] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.970241] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.970279] tegra-pmc: ### PMC reset level: L1 [ 0.970293] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.970405] tegra-pmc: PMC Prod config success [ 0.975468] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.980291] random: fast init done [ 0.980549] printk: console [ttyTCU0] enabled [ 2.533399] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.537470] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.542297] arm-smmu 10000000.iommu: stage 1 translation [ 2.547652] arm-smmu 10000000.iommu: stage 2 translation [ 2.553027] arm-smmu 10000000.iommu: nested translation [ 2.558621] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.565795] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.576874] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.578661] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.585521] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.593045] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.598260] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.602984] arm-smmu 12000000.iommu: stage 1 translation [ 2.608493] arm-smmu 12000000.iommu: stage 2 translation [ 2.613930] arm-smmu 12000000.iommu: nested translation [ 2.619352] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.626528] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.637747] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.639906] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.646461] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.653570] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.663385] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.666636] tegra_profiler: auth: init [ 2.671203] THERMAL EST: found 3 subdevs [ 2.674271] THERMAL EST num_resources: 0 [ 2.678442] [THERMAL EST subdev 0] [ 2.681704] [THERMAL EST subdev 1] [ 2.685146] [THERMAL EST subdev 2] [ 2.688441] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.694949] THERMAL EST: thz register success. [ 2.698830] THERMAL EST: end of probe, return err: 0 [ 2.704456] nvsciipc: loaded module [ 2.711543] tun: Universal TUN/TAP device driver, 1.6 [ 2.713773] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.720149] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.725451] e1000e: Intel(R) PRO/1000 Network Driver [ 2.730634] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.736460] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.742015] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.748209] PPP generic driver version 2.4.2 [ 2.752186] PPP BSD Compression module registered [ 2.756746] PPP Deflate Compression module registered [ 2.761981] PPP MPPE Compression module registered [ 2.767261] usbcore: registered new interface driver r8152 [ 2.772512] usbcore: registered new interface driver asix [ 2.777836] usbcore: registered new interface driver ax88179_178a [ 2.784214] usbcore: registered new interface driver cdc_ether [ 2.789906] usbcore: registered new interface driver net1080 [ 2.795505] usbcore: registered new interface driver cdc_subset [ 2.801802] usbcore: registered new interface driver zaurus [ 2.807248] usbcore: registered new interface driver cdc_ncm [ 2.812925] usbcore: registered new interface driver aqc111 [ 2.818589] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.824638] ohci-pci: OHCI PCI platform driver [ 2.829190] ohci-platform: OHCI generic platform driver [ 2.835050] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.841061] usbcore: registered new interface driver uas [ 2.845544] usbcore: registered new interface driver usb-storage [ 2.851643] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.857705] mousedev: PS/2 mouse device common for all mice [ 2.862420] usbcore: registered new interface driver xpad [ 2.870402] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.873405] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.880919] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.887511] i2c /dev entries driver [ 2.890791] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.896885] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.902024] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.907637] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.912672] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.918184] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.923558] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.937131] device-mapper: uevent: version 1.0.3 [ 2.937581] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.944194] cpuidle: Initializing cpuidle driver [ 2.947959] sdhci: Secure Digital Host Controller Interface driver [ 2.952732] sdhci: Copyright(c) Pierre Ossman [ 2.956839] Synopsys Designware Multimedia Card Interface Driver [ 2.963017] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.969011] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.969746] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.982537] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.004615] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.014538] vdd-1v0: supplied by regulator-dummy [ 3.020081] vdd-1v8-hs: supplied by regulator-dummy [ 3.024947] vdd-1v8-ls: supplied by regulator-dummy [ 3.029855] vdd-1v8-ao: supplied by regulator-dummy [ 3.033849] vddio-ddr-1v1: supplied by regulator-dummy [ 3.038384] vdd-rtc: supplied by regulator-dummy [ 3.040202] spmic-ldo1: supplied by regulator-dummy [ 3.041522] vdd-ao-3v3: supplied by regulator-dummy [ 3.047712] vddio-emmc-3v3: supplied by regulator-dummy [ 3.054133] spmic-ldo4: supplied by regulator-dummy [ 3.055527] vdd-usb-3v3: supplied by regulator-dummy [ 3.061708] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.068008] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.073576] spmic-ldo8: supplied by vdd-1v8-ls [ 3.075236] gpio-510 (gpio_default): hogged as output/high [ 3.076669] gpio-511 (gpio_default): hogged as output/high [ 3.079654] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.215414] max77686-rtc max77620-rtc: registered as rtc0 [ 3.216471] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.216823] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.049783] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.050994] hid: raw HID events driver (C) Jiri Kosina [ 4.052040] usbcore: registered new interface driver usbhid [ 4.052179] usbhid: USB HID core driver [ 4.054242] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.055650] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.046258] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.120357] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.908 ms) ÿá[ 4.139702] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.140407] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.141788] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.142932] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.145193] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.146076] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.146915] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.148621] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.148864] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.151968] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.151987] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.154760] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.169803] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.175096] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.180438] denver_knobs_init:MTS_VERSION:55637613 [ 4.193143] t19x_cache tegra-cache: probed [ 4.195894] optee: probing for conduit method. [ 4.196706] optee: revision 3.16 (65cc2218) [ 4.197690] optee: dynamic shared memory is enabled [ 4.201425] optee: initialized driver [ 4.208327] nvpmodel: initialized successfully [ 4.209159] tegra_hv: get_hvd: not initialized yet [ 4.213757] user_ivc_mempool: hypervisor not present [ 4.219578] usbcore: registered new interface driver snd-usb-audio [ 4.226108] u32 classifier [ 4.227444] input device check on [ 4.231117] Actions configured [ 4.235090] Initializing XFRM netlink socket [ 4.239850] NET: Registered protocol family 10 [ 4.246591] Segment Routing with IPv6 [ 4.247283] NET: Registered protocol family 17 [ 4.251314] NET: Registered protocol family 15 [ 4.255995] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.269507] Bluetooth: RFCOMM socket layer initialized [ 4.274210] Bluetooth: RFCOMM ver 1.11 [ 4.277894] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.283970] Bluetooth: HIDP socket layer initialized [ 4.289798] 9pnet: Installing 9P2000 support [ 4.293490] Key type dns_resolver registered [ 4.298942] registered taskstats version 1 [ 4.301549] Loading compiled-in X.509 certificates [ 4.315871] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.317666] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.327478] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.329797] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.338096] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.346715] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.462437] tegra194-pcie 14160000.pcie: Link up [ 4.465281] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.465578] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.465730] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.465956] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.466175] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.466665] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.467157] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.479243] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.479844] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.480305] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.481963] pci 0004:01:00.0: supports D1 D2 [ 4.482183] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.492939] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.493296] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.493694] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.494157] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.494590] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.494900] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.496988] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.504438] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.513185] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.523182] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.527872] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.533455] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.540552] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.549570] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.550839] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.559549] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.567752] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.683379] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.683876] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.684072] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.684287] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.684520] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.684862] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.685322] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.685816] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.705913] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.706246] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.708095] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.709196] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.710719] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.712465] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.713418] pci 0005:00:00.0: Removing from iommu group 7 [ 5.713841] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.751087] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.774884] host1x 13e10000.host1x: initialized [ 5.776578] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.777424] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.778699] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.779288] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.780304] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.780910] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.781910] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.782561] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.783542] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.784200] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.793619] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.800229] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.810497] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.817301] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.827280] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.834492] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.844381] falcon 15340000.vic: Adding to iommu group 17 [ 5.859592] falcon 15340000.vic: initialized [ 5.860696] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.866726] falcon 15380000.nvjpg: initialized [ 5.867533] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.877059] falcon 154c0000.nvenc: initialized [ 5.877608] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.887362] falcon 15a80000.nvenc1: initialized [ 5.888064] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.900342] nvdec 15480000.nvdec: initialized [ 5.900888] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.911447] nvdec 15140000.nvdec1: initialized [ 5.912049] tsec 15500000.tsec: Adding to iommu group 18 [ 5.917784] tsec 15500000.tsec: initialized [ 5.918403] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.924257] tsec 15100000.tsecb: initialized [ 5.928009] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.956261] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.969176] gpio-374 (wifi-enable): hogged as output/high [ 5.969510] gpio-431 (camera-control-output-low): hogged as output/low [ 5.969837] gpio-432 (camera-control-output-low): hogged as output/low [ 5.971660] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.973883] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.974575] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.976133] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.980855] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.986679] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.992207] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.000507] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.008111] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.019828] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.024695] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.030643] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.039275] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.048758] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.056394] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.063779] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.069845] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.079225] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.085697] pva 16000000.pva0: Adding to iommu group 22 [ 6.113961] pva 16000000.pva0: initialized [ 6.119218] pva 16800000.pva1: Adding to iommu group 23 [ 6.131847] pva 16800000.pva1: initialized [ 6.137109] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.158530] nvdla 15880000.nvdla0: initialized [ 6.160583] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.170812] nvdla 158c0000.nvdla1: initialized [ 6.175557] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.175880] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.176244] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.176284] tegradccommon 15200000.display-hub: dma mapping done [ 6.176403] tegradc 15200000.display: Adding to iommu group 26 [ 6.176688] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.179384] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.180217] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.180779] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.181119] tegra_cec 3960000.tegra_cec: probed [ 6.184346] tegradc 15210000.display: Adding to iommu group 26 [ 6.184560] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.184788] generic_infoframe_type: 0x87 [ 6.184877] tegradc 15200000.display: DT parsed successfully [ 6.184965] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.186750] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.192762] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.201055] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.201836] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.208116] kfuse 3830000.kfuse: initialized [ 6.215277] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.216372] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.221724] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.229542] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.231003] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.236364] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.237036] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.248160] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.249700] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.257851] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.264534] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.271645] tegradc 15210000.display: disp0 connected to head1->sor [ 6.293028] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.299195] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.306914] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.314736] tegradc 15210000.display: DT parsed successfully [ 6.334153] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.342459] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.351910] random: crng init done [ 6.389459] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.390967] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.396450] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.405126] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.413645] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.420469] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.427890] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.434925] usb usb1: Product: xHCI Host Controller [ 6.439963] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.446180] usb usb1: SerialNumber: 3610000.xhci [ 6.451860] hub 1-0:1.0: USB hub found [ 6.454775] hub 1-0:1.0: 4 ports detected [ 6.459408] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.464082] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.471919] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.479752] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.487516] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.494798] usb usb2: Product: xHCI Host Controller [ 6.499484] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.505939] usb usb2: SerialNumber: 3610000.xhci [ 6.511537] hub 2-0:1.0: USB hub found [ 6.514439] hub 2-0:1.0: 4 ports detected [ 6.556969] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.563857] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.565615] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.565799] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.578509] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.579574] tegra194-cpufreq ccplex: probed with BWMGR [ 6.580850] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.581284] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.581812] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.582999] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.590823] tegra194-vi5 15c10000.vi: initialized [ 6.592147] tegradc 15210000.display: disp0 connected to head1->sor [ 6.592300] mmc0: CQHCI version 5.10 [ 6.593400] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.593596] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.593603] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.593610] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.593615] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.593619] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.594503] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.598405] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.604255] tegradc 15210000.display: DT parsed successfully [ 6.612085] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.618719] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.618806] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.625488] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.685469] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.685550] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.685561] generic_infoframe_type: 0x87 [ 6.685618] tegradc 15200000.display: DT parsed successfully [ 6.685656] tegradc 15200000.display: Display dc.0000000061138332 registered with id=0 [ 6.693486] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.704671] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.710422] nvethernet 2490000.ethernet: Macsec not supported [ 6.718639] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.719047] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.726391] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.728056] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.735017] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.741848] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.749142] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.755183] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.778999] mmc0: Command Queue Engine enabled [ 6.781991] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.792495] mmc0: periodic cache flush enabled [ 6.793085] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.793090] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.800696] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.804331] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.816989] tegradc 15200000.display: probed [ 6.823479] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.852486] tegra-se-nvhost 15810000.se: initialized [ 6.852580] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.869821] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.871380] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.877916] tegra-se-nvhost 15820000.se: initialized [ 6.879590] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.884101] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.896949] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.903076] tegra-se-nvhost 15830000.se: initialized [ 6.907823] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.911249] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.915529] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.922138] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.928986] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.928991] usb 1-2: Manufacturer: Generic [ 6.931160] hub 1-2:1.0: USB hub found [ 6.935704] tegra-se-nvhost 15840000.se: initialized [ 6.940761] hub 1-2:1.0: 4 ports detected [ 6.945379] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.963199] Console: switching to colour frame buffer device 240x67 [ 6.964304] tegra_actmon d230000.actmon: in actmon_register()... [ 6.969251] tegradc 15200000.display: fb registered [ 6.969322] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.975218] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.980906] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.985985] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.991176] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.997722] hvc_sysfs: hypervisor is not present [ 7.031241] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.044422] ALSA device list: [ 7.044520] No soundcards found. [ 7.063077] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.064601] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.064825] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.065817] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.066002] Extcon AUX1(HDMI) enable [ 7.066265] tegradc 15210000.display: disp1 connected to head1->sor [ 7.068304] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.071114] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.079232] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.079236] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.079259] usb 2-3: Manufacturer: Generic [ 7.086572] tegradc 15210000.display: DT parsed successfully [ 7.104569] hub 2-3:1.0: USB hub found [ 7.108600] tegradc 15210000.display: Display dc.000000002b883c7e registered with id=1 [ 7.114289] hub 2-3:1.0: 4 ports detected [ 7.120580] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.130858] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.144033] tegradc 15210000.display: probed [ 7.144360] tegradc 15210000.display: fb registered [ 7.149595] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.153700] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.155722] Freeing unused kernel memory: 3968K [ 7.161409] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.171256] tegradc 15210000.display: blank - powerdown [ 7.176633] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.182447] Run /init as init process [ 7.184839] Extcon DP: HPD disabled [ 7.186372] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.191596] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.191607] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.191613] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.202379] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.210860] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.243456] tegradc 15200000.display: blank - powerdown [ 7.280130] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.280135] Extcon AUX1(HDMI) disable [ 7.291470] Root device found: mmcblk0p1 [ 7.293573] Found dev node: /dev/mmcblk0p1 [ 7.303843] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.304730] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.316831] tegradc 15200000.display: unblank [ 7.317939] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.318141] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.324211] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.326092] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.330182] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.330186] Extcon AUX1(HDMI) enable [ 7.332072] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.336210] Rootfs mounted over mmcblk0p1 [ 7.343546] tegradc 15200000.display: sync windows ret = 246 [ 7.343684] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.366187] Switching from initrd to actual rootfs [ 7.366764] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.366777] usb 1-3: Product: Bluetooth Radio [ 7.379411] usb 1-3: Manufacturer: Realtek [ 7.379417] usb 1-3: SerialNumber: 00e04c000001 [ 7.386088] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.393231] Extcon HDMI: HPD enabled [ 7.396831] tegradc 15200000.display: hdmi: plugged [ 7.530696] systemd[1]: System time before build time, advancing clock. [ 7.604694] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.609733] systemd[1]: Detected architecture arm64. [ 7.659343] systemd[1]: Set hostname to . [ 7.823951] systemd-sysv-generator[254]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.183891] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.185583] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.191461] systemd[1]: Created slice system-modprobe.slice. [ 8.196448] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.200811] systemd[1]: Created slice User and Session Slice. [ 8.204419] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.208568] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.211956] systemd[1]: Reached target User and Group Name Lookups. [ 8.215166] systemd[1]: Reached target Slices. [ 8.218210] systemd[1]: Reached target Swap. [ 8.222262] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.225932] systemd[1]: Listening on Syslog Socket. [ 8.229514] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.232952] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.237115] systemd[1]: Listening on Journal Audit Socket. [ 8.240726] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.244508] systemd[1]: Listening on Journal Socket. [ 8.248184] systemd[1]: Listening on udev Control Socket. [ 8.253243] systemd[1]: Listening on udev Kernel Socket. [ 8.263197] systemd[1]: Mounting Huge Pages File System... [ 8.271811] systemd[1]: Mounting POSIX Message Queue File System... [ 8.280035] systemd[1]: Mounting RPC Pipe File System... [ 8.288524] systemd[1]: Mounting Kernel Debug File System... [ 8.297257] systemd[1]: Mounting Kernel Trace File System... [ 8.307528] systemd[1]: Starting Journal Service... [ 8.316879] systemd[1]: Starting Set the console keyboard layout... [ 8.325245] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.328981] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.335518] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.343636] systemd[1]: Started Nameserver information manager. [ 8.348458] systemd[1]: Reached target Network (Pre). [ 8.355651] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.357547] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.367760] systemd[1]: Starting Load Kernel Modules... [ 8.375688] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.384112] systemd[1]: Starting udev Coldplug all Devices... [ 8.394759] systemd[1]: Mounted Huge Pages File System. [ 8.398644] systemd[1]: Mounted POSIX Message Queue File System. [ 8.402181] systemd[1]: Mounted RPC Pipe File System. [ 8.406813] systemd[1]: Mounted Kernel Debug File System. [ 8.408635] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.409452] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.409458] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.409466] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.409469] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.409688] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.409888] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.410063] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.410071] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.413540] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.430133] systemd[1]: Mounted Kernel Trace File System. [ 8.436843] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.441683] systemd[1]: nvfb-udev.service: Succeeded. [ 8.445797] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.455642] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.469032] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.471741] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.478862] systemd[1]: Starting Load/Save Random Seed... [ 8.487368] systemd[1]: Starting Create System Users... [ 8.494522] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.494522] [ 8.525725] systemd[1]: Finished Load Kernel Modules. [ 8.531273] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.538035] systemd[1]: Mounting Kernel Configuration File System... [ 8.546912] systemd[1]: Started OP-TEE Client Supplicant. [ 8.555436] systemd[1]: Starting Apply Kernel Variables... [ 8.567097] systemd[1]: Finished Load/Save Random Seed. [ 8.571287] systemd[1]: Mounted Kernel Configuration File System. [ 8.580807] systemd[1]: Finished Create System Users. [ 8.588865] systemd[1]: Starting Create Static Device Nodes in /dev... [ 10.095077] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.106469] imx219 9-0010: board setup failed [ 10.107972] imx219: probe of 9-0010 failed with error -121 [ 10.130536] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.139484] imx219 10-0010: board setup failed [ 10.140865] imx219: probe of 10-0010 failed with error -121 [ 10.199226] hot-surface-alert cooling state: 0 -> 1 [ 11.234604] using random self ethernet address [ 11.237471] using random host ethernet address [ 11.656505] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.658191] Creating 1 MTD partitions on "spi6.0": [ 11.660213] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.296746] using random self ethernet address [ 12.298551] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.822847] nvidia: loading out-of-tree module taints kernel. [ 59.668354] watchdog: watchdog0: watchdog did not stop! [ 60.139122] Trying to unregister non-registered hwtime source [ 63.197567] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.199629] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0,ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.034] > DEVICE_PROD: device prod is not initialized. [0002.340] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.341] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.341] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.342] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.342] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.343] I> dram_block larger than 80000000 [0002.345] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.356] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.360] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.591] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TCÿâmail_early initialized ÿä: ÿâfuse initialized hwwdt initialized ÿäNon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿänalÿâadc initialized ÿä ÿâfmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized ÿä:ÿâpm_post initialized dbells initialized ÿä23:ÿâdmce initialized cvc initialized ÿä20 UTC 2022 aÿâavfs_clk_mach_post initialized ÿäarchÿâavfs_clk_platform_post initialized ÿä64 ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuratioÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿän might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.211] I> Welcome to NVDisp-Init [0003.211] I> NVDisp-Init version: t194-f9ecfedc [0003.211] I> CPU-BL Params @ 0xca020000 [0003.212] I> 0) Base:0x00000000 Size:0x00000000 [0003.212] I> 1) Base:0xc8300000 Size:0x00100000 [0003.212] I> 2) Base:0xc9800000 Size:0x00200000 [0003.213] I> 3) Base:0xc8600000 Size:0x00200000 [0003.215] I> 4) Base:0xc8200000 Size:0x00100000 [0003.220] I> 5) Base:0xc8100000 Size:0x00100000 [0003.224] I> 6) Base:0xc9400000 Size:0x00400000 [0003.228] I> 7) Base:0xc9000000 Size:0x00400000 [0003.233] I> 8) Base:0xc8000000 Size:0x00100000 [0003.237] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.242] I> 10) Base:0xca800000 Size:0x00800000 [0003.246] I> 11) Base:0x40000000 Size:0x00040000 [0003.251] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.255] I> 13) Base:0x40046000 Size:0x00002000 [0003.260] I> 14) Base:0x40048000 Size:0x00002000 [0003.264] I> 15) Base:0xaf000000 Size:0x00004000 [0003.269] I> 16) Base:0x4004a000 Size:0x00002000 [0003.273] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.278] I> 18) Base:0x4004c000 Size:0x00002000 [0003.282] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.286] I> 20) Base:0x4004e000 Size:0x00002000 [0003.291] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.295] I> 22) Base:0x00000000 Size:0x00000000 [0003.300] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.304] I> 24) Base:0xcc000000 Size:0x02000000 [0003.309] I> 25) Base:0x40050000 Size:0x00002000 [0003.313] I> 26) Base:0x40040000 Size:0x00006000 [0003.318] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.322] I> 28) Base:0xc8400000 Size:0x00200000 [0003.327] I> 29) Base:0xc8800000 Size:0x00400000 [0003.331] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.336] I> 31) Base:0x00000000 Size:0x00000000 [0003.340] I> 32) Base:0xf8000000 Size:0x08000000 [0003.344] I> 33) Base:0xce000000 Size:0x2a000000 [0003.349] I> 34) Base:0xcb000000 Size:0x01000000 [0003.353] I> 35) Base:0xae000000 Size:0x01000000 [0003.358] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.362] I> 37) Base:0xca000000 Size:0x00800000 [0003.367] I> 38) Base:0x80000000 Size:0x20000000 [0003.371] I> 39) Base:0xb0000000 Size:0x08000000 [0003.376] I> 40) Base:0x00000000 Size:0x00000000 [0003.380] I> 41) Base:0x00000000 Size:0x00000000 [0003.385] I> 42) Base:0x00000000 Size:0x00000000 [0003.389] I> 43) Base:0x00000000 Size:0x00000000 [0003.394] I> 44) Base:0x00000000 Size:0x00000000 [0003.398] I> 45) Base:0x00000000 Size:0x00000000 [0003.403] GIC-SPI Target CPU: 0 [0003.405] Interrupts Init done [0003.408] calling constructors [0003.411] initializing heap [0003.414] I> Heap: [0xa0960000 ... 0xadf00000] [0003.418] initializing threads [0003.421] initializing timers [0003.424] creating bootstrap completion thread [0003.428] top of bootstrap2() [0003.431] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.436] initializing platform [0003.439] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.444] W> device prod register failed [0003.448] I> Bl_dtb @0xadf00000 [0003.451] I> gpio framework initialized [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.467] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.473] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.495] I> Boot_device: QSPI_FLASH instance: 0 [0003.499] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.510] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.517] I> QSPI source rate = 204000 Khz [0003.520] I> Requested rate for QSPI clock = 34000 Khz [0003.526] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.530] I> tx_clk_tap_delay : 0 [0003.533] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.544] I> Qspi initialized successfully [0003.545] I> qspi flash-0 params source = boot args [0003.549] W> No board IDs available [0003.552] E> Failed to get board id info! [0003.558] I> sdmmc-3 params source = safe params [0003.565] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.566] W> Cannot find any partition table for 00000003 [0003.571] E> Failed to publish 00000003 [0003.575] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.612] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.619] E> invalid display type [0003.620] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.649] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.650] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.683] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.723] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.739] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.750] calling apps_init() [0003.750] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000687] Console: colour dummy device 80x25 [ 0.002021] printk: console [tty0] enabled [ 0.002083] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002118] pid_max: default: 32768 minimum: 301 [ 0.002281] LSM: Security Framework initializing [ 0.002337] Yama: becoming mindful. [ 0.002378] SELinux: Initializing. [ 0.002524] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002560] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005505] rcu: Hierarchical SRCU implementation. [ 0.005760] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006639] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006714] DTB Build time: Aug 10 2022 20:31:49 [ 0.009576] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009842] Remapping and enabling EFI services. [ 0.011851] smp: Bringing up secondary CPUs ... [ 0.040962] Detected PIPT I-cache on CPU1 [ 0.041075] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070485] Detected PIPT I-cache on CPU2 [ 0.070643] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100215] Detected PIPT I-cache on CPU3 [ 0.100432] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130145] Detected PIPT I-cache on CPU4 [ 0.130328] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160028] Detected PIPT I-cache on CPU5 [ 0.160181] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160569] smp: Brought up 1 node, 6 CPUs [ 0.160803] SMP: Total of 6 processors activated. [ 0.160881] CPU features: detected: Privileged Access Never [ 0.160908] CPU features: detected: LSE atomic instructions [ 0.160927] CPU features: detected: User Access Override [ 0.160946] CPU features: detected: 32-bit EL0 Support [ 0.160963] CPU features: detected: RAS Extension Support [ 0.160981] CPU features: detected: CRC32 instructions [ 0.161034] CPU features: detected: 32-bit EL1 Support [ 0.229154] CPU: All CPU(s) started at EL2 [ 0.235787] devtmpfs: initialized [ 0.286625] Registered cp15_barrier emulation handler [ 0.286760] Registered setend emulation handler [ 0.286782] KASLR enabled [ 0.287119] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287146] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288525] pinctrl core: initialized pinctrl subsystem [ 0.289561] SMBIOS 3.0.0 present. [ 0.289590] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.290232] NET: Registered protocol family 16 [ 0.292100] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292640] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293362] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.293425] audit: initializing netlink subsys (disabled) [ 0.293694] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.294168] thermal_sys: Registered thermal governor 'step_wise' [ 0.294174] thermal_sys: Registered thermal governor 'power_allocator' [ 0.294188] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.296649] cpuidle: using governor menu [ 0.297006] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297495] ASID allocator initialised with 32768 entries [ 0.297741] Serial: AMBA PL011 UART driver [ 0.301105] Tegra reboot handler registered. [ 0.374275] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.374392] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.374571] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.374614] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.374740] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.374781] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.374894] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.374934] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.375061] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.375106] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.377178] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.377210] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.377238] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.377263] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.377291] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.377318] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.377353] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.377383] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.377406] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.377428] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.377450] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.377491] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.377515] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.377537] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.377559] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.377581] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.377603] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.377690] mc-err: mcerr ops are set to t19x [ 0.390755] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390788] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390800] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390810] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399377] ACPI: Interpreter disabled. [ 0.401236] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.403116] iommu: Default domain type: Translated [ 0.403223] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.403747] SCSI subsystem initialized [ 0.403981] usbcore: registered new interface driver usbfs [ 0.404048] usbcore: registered new interface driver hub [ 0.404100] usbcore: registered new device driver usb [ 0.404677] mc: Linux media interface: v0.10 [ 0.404726] videodev: Linux video capture interface: v2.00 [ 0.405240] pps_core: LinuxPPS API ver. 1 registered [ 0.405260] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.405289] PTP clock support registered [ 0.405607] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.406077] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.406172] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.407107] Registered efivars operations [ 0.414989] FPGA manager framework [ 0.415143] Advanced Linux Sound Architecture Driver Initialized. [ 0.416094] Bluetooth: Core ver 2.22 [ 0.416146] NET: Registered protocol family 31 [ 0.416163] Bluetooth: HCI device and connection manager initialized [ 0.416184] Bluetooth: HCI socket layer initialized [ 0.416201] Bluetooth: L2CAP socket layer initialized [ 0.416230] Bluetooth: SCO socket layer initialized [ 0.418435] camchar: rtcpu character device driver loaded [ 0.419510] clocksource: Switched to clocksource arch_sys_counter [ 0.887482] VFS: Disk quotas dquot_6.6.0 [ 0.887600] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.888119] pnp: PnP ACPI: disabled [ 0.903169] la/ptsa driver initialized. [ 0.903334] NET: Registered protocol family 2 [ 0.903645] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.911050] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.911244] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.911674] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.912305] TCP: Hash tables configured (established 65536 bind 65536) [ 0.912446] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.912602] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.912867] NET: Registered protocol family 1 [ 0.913685] RPC: Registered named UNIX socket transport module. [ 0.913712] RPC: Registered udp transport module. [ 0.913726] RPC: Registered tcp transport module. [ 0.913738] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.913774] PCI: CLS 0 bytes, default 64 [ 0.914086] Trying to unpack rootfs image as initramfs... [ 1.178133] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.181446] Freeing initrd memory: 8196K [ 1.186218] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.186250] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.186301] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.186669] kvm [1]: IPA Size Limit: 40 bits [ 1.187197] kvm [1]: vgic interrupt IRQ9 [ 1.187901] kvm [1]: VHE mode initialized successfully [ 1.189669] Initialise system trusted keyrings [ 1.190040] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.197306] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.198240] NFS: Registering the id_resolver key type [ 1.198284] Key type id_resolver registered [ 1.198299] Key type id_legacy registered [ 1.198389] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.198412] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.198451] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.208630] NET: Registered protocol family 38 [ 1.208652] Key type asymmetric registered [ 1.208667] Asymmetric key parser 'x509' registered [ 1.208716] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.208977] io scheduler mq-deadline registered [ 1.209024] io scheduler kyber registered [ 1.214960] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.217756] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.217836] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.217906] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.218010] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.218112] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.223656] scrncapt: init (heads:4 wins:6 planes:4) [ 1.223767] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.224773] EINJ: ACPI disabled. [ 1.228071] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.228094] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.228108] tegra-pmc: ### PMC reset level: L1 [ 1.228121] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.228193] tegra-pmc: PMC Prod config success [ 1.233641] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.244828] random: fast init done [ 1.250594] printk: console [ttyTCU0] enabled [ 2.790872] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.795845] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.800443] arm-smmu 10000000.iommu: stage 1 translation [ 2.805598] arm-smmu 10000000.iommu: stage 2 translation [ 2.811107] arm-smmu 10000000.iommu: nested translation [ 2.816452] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.823621] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.834434] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.837003] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.843591] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.850932] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.856615] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.861076] arm-smmu 12000000.iommu: stage 1 translation [ 2.866830] arm-smmu 12000000.iommu: stage 2 translation [ 2.872002] arm-smmu 12000000.iommu: nested translation [ 2.877701] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.884871] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.895584] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.897958] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.904292] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.912012] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.921698] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.924819] tegra_profiler: auth: init [ 2.929095] THERMAL EST: found 3 subdevs [ 2.932677] THERMAL EST num_resources: 0 [ 2.936248] [THERMAL EST subdev 0] [ 2.939835] [THERMAL EST subdev 1] [ 2.942937] [THERMAL EST subdev 2] [ 2.946464] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.952976] THERMAL EST: thz register success. [ 2.957176] THERMAL EST: end of probe, return err: 0 [ 2.962526] nvsciipc: loaded module [ 2.969721] tun: Universal TUN/TAP device driver, 1.6 [ 2.972048] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.977964] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.983786] e1000e: Intel(R) PRO/1000 Network Driver [ 2.988465] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.994793] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.999851] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.006051] PPP generic driver version 2.4.2 [ 3.010282] PPP BSD Compression module registered [ 3.015068] PPP Deflate Compression module registered [ 3.020317] PPP MPPE Compression module registered [ 3.025083] usbcore: registered new interface driver r8152 [ 3.030842] usbcore: registered new interface driver asix [ 3.035914] usbcore: registered new interface driver ax88179_178a [ 3.042057] usbcore: registered new interface driver cdc_ether [ 3.048245] usbcore: registered new interface driver net1080 [ 3.053841] usbcore: registered new interface driver cdc_subset [ 3.059637] usbcore: registered new interface driver zaurus [ 3.065326] usbcore: registered new interface driver cdc_ncm [ 3.071024] usbcore: registered new interface driver aqc111 [ 3.076663] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.082971] ohci-pci: OHCI PCI platform driver [ 3.087305] ohci-platform: OHCI generic platform driver [ 3.093150] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.099389] usbcore: registered new interface driver uas [ 3.103316] usbcore: registered new interface driver usb-storage [ 3.109696] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.115437] mousedev: PS/2 mouse device common for all mice [ 3.120469] usbcore: registered new interface driver xpad [ 3.128688] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.131438] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.139264] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.145893] i2c /dev entries driver [ 3.149190] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.154676] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.160016] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.165707] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.170997] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.176248] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.181659] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.195377] device-mapper: uevent: version 1.0.3 [ 3.195854] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.202074] cpuidle: Initializing cpuidle driver [ 3.206295] sdhci: Secure Digital Host Controller Interface driver [ 3.211076] sdhci: Copyright(c) Pierre Ossman [ 3.214912] Synopsys Designware Multimedia Card Interface Driver [ 3.221372] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.227309] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.228181] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.240437] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.261944] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.271628] vdd-1v0: supplied by regulator-dummy [ 3.277108] vdd-1v8-hs: supplied by regulator-dummy [ 3.281953] vdd-1v8-ls: supplied by regulator-dummy [ 3.286838] vdd-1v8-ao: supplied by regulator-dummy [ 3.290741] vddio-ddr-1v1: supplied by regulator-dummy [ 3.295244] vdd-rtc: supplied by regulator-dummy [ 3.296990] spmic-ldo1: supplied by regulator-dummy [ 3.298216] vdd-ao-3v3: supplied by regulator-dummy [ 3.304458] vddio-emmc-3v3: supplied by regulator-dummy [ 3.310720] spmic-ldo4: supplied by regulator-dummy [ 3.311997] vdd-usb-3v3: supplied by regulator-dummy [ 3.318189] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.324405] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.330017] spmic-ldo8: supplied by vdd-1v8-ls [ 3.331557] gpio-510 (gpio_default): hogged as output/high [ 3.332929] gpio-511 (gpio_default): hogged as output/high [ 3.335874] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.473446] max77686-rtc max77620-rtc: registered as rtc0 [ 3.474770] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.475099] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.293905] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.295015] hid: raw HID events driver (C) Jiri Kosina [ 4.295958] usbcore: registered new interface driver usbhid [ 4.296130] usbhid: USB HID core driver [ 4.298233] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.299738] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.414407] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.488598] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.000 ms) ÿá[ 4.383813] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.384328] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.385324] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.386064] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.387691] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.388268] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.388889] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.390210] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.390448] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.393153] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.401133] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.406750] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.412091] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.417622] denver_knobs_init:MTS_VERSION:55637613 [ 4.429951] t19x_cache tegra-cache: probed [ 4.432772] optee: probing for conduit method. [ 4.433583] optee: revision 3.16 (65cc2218) [ 4.434589] optee: dynamic shared memory is enabled [ 4.438720] optee: initialized driver [ 4.446039] nvpmodel: initialized successfully [ 4.446588] tegra_hv: get_hvd: not initialized yet [ 4.451216] user_ivc_mempool: hypervisor not present [ 4.457332] usbcore: registered new interface driver snd-usb-audio [ 4.463314] u32 classifier [ 4.464709] input device check on [ 4.468502] Actions configured [ 4.472296] Initializing XFRM netlink socket [ 4.477404] NET: Registered protocol family 10 [ 4.484198] Segment Routing with IPv6 [ 4.484564] NET: Registered protocol family 17 [ 4.488600] NET: Registered protocol family 15 [ 4.493303] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.506669] Bluetooth: RFCOMM socket layer initialized [ 4.511590] Bluetooth: RFCOMM ver 1.11 [ 4.515151] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.521257] Bluetooth: HIDP socket layer initialized [ 4.526932] 9pnet: Installing 9P2000 support [ 4.530803] Key type dns_resolver registered [ 4.536770] registered taskstats version 1 [ 4.538838] Loading compiled-in X.509 certificates [ 4.551953] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.555111] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.565567] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.566868] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.575754] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.583829] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.699653] tegra194-pcie 14160000.pcie: Link up [ 4.702552] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.702776] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.703002] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.703246] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.703446] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.703860] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.704298] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.717293] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.717816] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.718258] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.719888] pci 0004:01:00.0: supports D1 D2 [ 4.720055] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.729817] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.730215] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.730518] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.730891] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.731258] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.731437] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.734301] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.741908] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.750174] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.760601] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.764934] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.770613] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.777587] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.787321] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.788107] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.796837] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.805290] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.920466] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.921079] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.921325] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.921462] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.921740] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.921927] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.922419] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.922929] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.946179] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.946485] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.948367] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.949588] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.950675] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.952384] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.953485] pci 0005:00:00.0: Removing from iommu group 7 [ 5.953957] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.984942] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.006395] host1x 13e10000.host1x: initialized [ 6.007884] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.008745] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.009805] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.010446] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.011431] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.012080] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.013051] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.013622] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.014515] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.020672] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.030759] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.037762] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.047902] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.054404] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.064560] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.071469] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.081593] falcon 15340000.vic: Adding to iommu group 17 [ 6.095975] falcon 15340000.vic: initialized [ 6.096835] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.102316] falcon 15380000.nvjpg: initialized [ 6.102838] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.114232] falcon 154c0000.nvenc: initialized [ 6.115019] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.124564] falcon 15a80000.nvenc1: initialized [ 6.125278] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.137582] nvdec 15480000.nvdec: initialized [ 6.138139] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.147934] nvdec 15140000.nvdec1: initialized [ 6.148424] tsec 15500000.tsec: Adding to iommu group 18 [ 6.153452] tsec 15500000.tsec: initialized [ 6.153867] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.161282] tsec 15100000.tsecb: initialized [ 6.164853] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.190772] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.202325] gpio-374 (wifi-enable): hogged as output/high [ 6.202584] gpio-431 (camera-control-output-low): hogged as output/low [ 6.202835] gpio-432 (camera-control-output-low): hogged as output/low [ 6.204624] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.206268] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.206942] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.212685] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.217983] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.223625] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.229254] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.238113] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.244953] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.256253] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.261582] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.267448] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.276592] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.285925] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.292811] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.300408] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.306888] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.316513] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.322610] pva 16000000.pva0: Adding to iommu group 22 [ 6.349422] pva 16000000.pva0: initialized [ 6.353727] pva 16800000.pva1: Adding to iommu group 23 [ 6.371980] pva 16800000.pva1: initialized [ 6.376575] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.389884] nvdla 15880000.nvdla0: initialized [ 6.391238] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.400176] nvdla 158c0000.nvdla1: initialized [ 6.402597] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.402852] tegradc 15200000.display: Adding to iommu group 26 [ 6.403091] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.403394] tegradccommon 15200000.display-hub: dma mapping done [ 6.409835] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.410241] generic_infoframe_type: 0x87 [ 6.410480] tegradc 15200000.display: DT parsed successfully [ 6.410797] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.412529] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.413666] tegradc 15210000.display: Adding to iommu group 26 [ 6.418740] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.427971] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.430795] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.438434] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.445116] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.452791] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.453976] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.458821] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.466802] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.472783] tegra_cec 3960000.tegra_cec: probed [ 6.479874] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.485551] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.492132] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.501524] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.505967] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.512626] kfuse 3830000.kfuse: initialized [ 6.520971] tegradc 15210000.display: disp0 connected to head1->sor [ 6.526948] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.530557] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.536975] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.543536] tegradc 15210000.display: DT parsed successfully [ 6.551328] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.556671] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.577165] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.587084] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.592154] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.600855] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.606394] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.625591] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.625943] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.629617] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.638040] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.646914] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.653486] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.660874] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.667970] usb usb1: Product: xHCI Host Controller [ 6.672920] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.679224] usb usb1: SerialNumber: 3610000.xhci [ 6.685049] hub 1-0:1.0: USB hub found [ 6.687948] hub 1-0:1.0: 4 ports detected [ 6.692758] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.697673] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.705188] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.712847] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.720761] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.727921] usb usb2: Product: xHCI Host Controller [ 6.732858] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.738809] usb usb2: SerialNumber: 3610000.xhci [ 6.744996] hub 2-0:1.0: USB hub found [ 6.747582] hub 2-0:1.0: 4 ports detected [ 6.787309] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.792874] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.794059] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.794260] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.806758] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.807843] tegra194-cpufreq ccplex: probed with BWMGR [ 6.809123] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.809612] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.810067] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.811307] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.820601] mmc0: CQHCI version 5.10 [ 6.824538] tegra194-vi5 15c10000.vi: initialized [ 6.825853] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.831180] generic_infoframe_type: 0x87 [ 6.832831] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.835025] tegradc 15200000.display: DT parsed successfully [ 6.841871] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.847371] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.854989] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.869788] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.876410] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.882940] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.889742] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.895580] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.897363] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.904193] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.912172] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.919147] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.919184] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.933632] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.943393] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.947673] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.947868] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.955508] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.972524] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.986248] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.993896] nvethernet 2490000.ethernet: Macsec not supported [ 7.009976] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 7.010117] ************************************** [ 7.010250] CPU:0, Error:cbb-noc [ 7.012569] Error Logger : 0 [ 7.015551] ErrLog0 : 0x80030000 [ 7.019220] Transaction Type : RD - Read, Incrementing [ 7.024555] Error Code : SLV [ 7.027881] Error Source : Target [ 7.031299] Error Description : Target error detected by CBB slave [ 7.038039] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 7.045564] Packet header Lock : 0 [ 7.049234] Packet header Len1 : 3 [ 7.052907] NOC protocol version : version >= 2.7 [ 7.057636] ErrLog1 : 0x352424 [ 7.061237] ErrLog2 : 0x0 [ 7.063848] RouteId : 0x352424 [ 7.067263] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 7.072507] Targflow : host1x_p2pm/T/host1x_p2pm [ 7.077061] TargSubRange : 18 [ 7.080556] SeqId : 0 [ 7.083099] ErrLog3 : 0x4045c [ 7.086336] ErrLog4 : 0x0 [ 7.089227] Address accessed : 0x15b4045c [ 7.093688] ErrLog5 : 0x909f851 [ 7.097184] Non-Modify : 0x1 [ 7.100610] AXI ID : 0x12 [ 7.103744] Master ID : CCPLEX [ 7.107069] Security Group(GRPSEC): 0x7e [ 7.111269] Cache : 0x1 -- Bufferable [ 7.115214] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.122294] FALCONSEC : 0x0 [ 7.125443] Virtual Queuing Channel(VQC): 0x0 [ 7.130083] ************************************** [ 7.135117] ------------[ cut here ]------------ [ 7.139363] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.146186] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.151432] Modules linked in: [ 7.154420] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 7.160815] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.173311] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.179351] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.183812] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.188541] sp : ffff800010003de0 [ 7.192222] x29: ffff800010003de0 x28: 0000000000000001 [ 7.197382] x27: 0000000000000005 x26: ffffccd104763f58 [ 7.203064] x25: ffffccd1050bce10 x24: 0000000000000001 [ 7.208488] x23: ffffccd104a57000 x22: ffffccd104edea00 [ 7.213840] x21: 000000000000000f x20: ffff2fc440e66080 [ 7.219344] x19: ffffccd104edea00 x18: 0000000000000010 [ 7.224761] x17: 0000000000000007 x16: 000000000000000e [ 7.230107] x15: ffffccd104d52bf0 x14: 0720072007200720 [ 7.235618] x13: 0720072007200720 x12: 0720072007200720 [ 7.241135] x11: 0720072007200720 x10: 0720072007200720 [ 7.246381] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.252144] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.257666] x5 : 0000000000057fa8 x4 : ffffccd104d67968 [ 7.263081] x3 : 00000000ffffffff x2 : ffffccd1031fe090 [ 7.268420] x1 : ffffccd104d52680 x0 : 0000000000010001 [ 7.273498] Call trace: [ 7.275953] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.280260] __handle_irq_event_percpu+0x68/0x2a0 [ 7.285048] handle_irq_event_percpu+0x40/0xa0 [ 7.289269] handle_irq_event+0x50/0xf0 [ 7.293272] handle_fasteoi_irq+0xc0/0x170 [ 7.297311] generic_handle_irq+0x40/0x60 [ 7.301323] __handle_domain_irq+0x70/0xd0 [ 7.305521] efi_header_end+0xb0/0xf0 [ 7.309021] el1_irq+0xd0/0x180 [ 7.311996] cpuidle_enter_state+0xb8/0x410 [ 7.315938] cpuidle_enter+0x40/0x60 [ 7.319697] call_cpuidle+0x44/0x80 [ 7.323197] do_idle+0x208/0x270 [ 7.326350] cpu_startup_entry+0x2c/0x70 [ 7.330372] rest_init+0xdc/0xe8 [ 7.333629] arch_call_rest_init+0x18/0x20 [ 7.337809] start_kernel+0x514/0x54c [ 7.341141] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.347095] ---[ end trace 3aa211813baf7fe5 ]--- [ 7.352069] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.359594] SMP: stopping secondary CPUs [ 7.363210] Kernel Offset: 0x4cd0f3040000 from 0xffff800010000000 [ 7.369568] PHYS_OFFSET: 0xffffd03cc0000000 [ 7.373687] CPU features: 0x8240002,03802a30 [ 7.377886] Memory Limit: none [ 7.381311] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.355] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.029] > DEVICE_PROD: device prod is not initialized. [0002.334] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.335] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.336] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.336] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.337] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.337] I> dram_block larger than 80000000 [0002.340] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.351] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.354] I> found decompressor handler: lz4 [0002.583] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.584] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.204] I> Welcome to NVDisp-Init [0003.204] I> NVDisp-Init version: t194-f9ecfedc [0003.204] I> CPU-BL Params @ 0xca020000 [0003.205] I> 0) Base:0x00000000 Size:0x00000000 [0003.205] I> 1) Base:0xc8300000 Size:0x00100000 [0003.205] I> 2) Base:0xc9800000 Size:0x00200000 [0003.205] I> 3) Base:0xc8600000 Size:0x00200000 [0003.208] I> 4) Base:0xc8200000 Size:0x00100000 [0003.212] I> 5) Base:0xc8100000 Size:0x00100000 [0003.217] I> 6) Base:0xc9400000 Size:0x00400000 [0003.221] I> 7) Base:0xc9000000 Size:0x00400000 [0003.226] I> 8) Base:0xc8000000 Size:0x00100000 [0003.230] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.235] I> 10) Base:0xca800000 Size:0x00800000 [0003.239] I> 11) Base:0x40000000 Size:0x00040000 [0003.244] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.248] I> 13) Base:0x40046000 Size:0x00002000 [0003.253] I> 14) Base:0x40048000 Size:0x00002000 [0003.257] I> 15) Base:0xaf000000 Size:0x00004000 [0003.262] I> 16) Base:0x4004a000 Size:0x00002000 [0003.266] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.270] I> 18) Base:0x4004c000 Size:0x00002000 [0003.275] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.279] I> 20) Base:0x4004e000 Size:0x00002000 [0003.284] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.288] I> 22) Base:0x00000000 Size:0x00000000 [0003.293] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.297] I> 24) Base:0xcc000000 Size:0x02000000 [0003.302] I> 25) Base:0x40050000 Size:0x00002000 [0003.306] I> 26) Base:0x40040000 Size:0x00006000 [0003.311] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.315] I> 28) Base:0xc8400000 Size:0x00200000 [0003.320] I> 29) Base:0xc8800000 Size:0x00400000 [0003.324] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.328] I> 31) Base:0x00000000 Size:0x00000000 [0003.333] I> 32) Base:0xf8000000 Size:0x08000000 [0003.337] I> 33) Base:0xce000000 Size:0x2a000000 [0003.342] I> 34) Base:0xcb000000 Size:0x01000000 [0003.346] I> 35) Base:0xae000000 Size:0x01000000 [0003.351] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.355] I> 37) Base:0xca000000 Size:0x00800000 [0003.360] I> 38) Base:0x80000000 Size:0x20000000 [0003.364] I> 39) Base:0xb0000000 Size:0x08000000 [0003.369] I> 40) Base:0x00000000 Size:0x00000000 [0003.373] I> 41) Base:0x00000000 Size:0x00000000 [0003.378] I> 42) Base:0x00000000 Size:0x00000000 [0003.382] I> 43) Base:0x00000000 Size:0x00000000 [0003.386] I> 44) Base:0x00000000 Size:0x00000000 [0003.391] I> 45) Base:0x00000000 Size:0x00000000 [0003.395] GIC-SPI Target CPU: 0 [0003.398] Interrupts Init done [0003.401] calling constructors [0003.404] initializing heap [0003.407] I> Heap: [0xa0960000 ... 0xadf00000] [0003.411] initializing threads [0003.414] initializing timers [0003.417] creating bootstrap completion thread [0003.421] top of bootstrap2() [0003.424] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.428] initializing platform [0003.431] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.437] W> device prod register failed [0003.441] I> Bl_dtb @0xadf00000 [0003.444] I> gpio framework initialized [0003.455] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.466] I> fixed regulator driver initialized [0003.479] I> register 'maxim' power off handle [0003.481] I> virtual i2c enabled [0003.481] I> registered 'maxim,max20024' pmic [0003.482] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.485] I> Boot-device: QSPI [0003.488] I> Boot_device: QSPI_FLASH instance: 0 [0003.492] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.503] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.510] I> QSPI source rate = 204000 Khz [0003.513] I> Requested rate for QSPI clock = 34000 Khz [0003.518] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.523] I> tx_clk_tap_delay : 0 [0003.526] I> rx_clk_tap_delay : 16 [0003.529] I> QSPI Flash Size = 32 MB [0003.537] I> Qspi initialized successfully [0003.538] I> qspi flash-0 params source = boot args [0003.542] W> No board IDs available [0003.545] E> Failed to get board id info! [0003.551] I> sdmmc-3 params source = safe params [0003.558] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.559] W> Cannot find any partition table for 00000003 [0003.564] E> Failed to publish 00000003 [0003.568] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.588] I> regulator 'vdd-hdmi-5v0' already enabled [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.594] I> hdmi cable connected [0003.600] W> set volts not configured for 'vdd-1v0' [0003.605] W> set volts not configured for 'vdd-1v8-hs' [0003.605] I> retrieved tmds range from prod_list_hdmi_soc [0003.611] E> invalid display type [0003.612] E> cannot find any other nvdisp nodes [0003.628] I> edid read success [0003.640] I> edid read success [0003.641] I> width = 640, height = 480, frequency = 25174825 [0003.641] I> width = 1920, height = 1080, frequency = 148500000 [0003.641] I> width = 1280, height = 768, frequency = 79500000 [0003.642] I> width = 1360, height = 768, frequency = 85500000 [0003.642] I> width = 720, height = 480, frequency = 26973026 [0003.646] I> width = 720, height = 576, frequency = 26973026 [0003.652] I> width = 1280, height = 720, frequency = 74175824 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1920, height = 1080, frequency = 148351648 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 720, height = 480, frequency = 26973026 [0003.680] I> width = 720, height = 576, frequency = 26973026 [0003.685] I> width = 3840, height = 2160, frequency = 296703296 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 4096, height = 2160, frequency = 296703296 [0003.714] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.726] I> hdmi_enable, starting HDMI initialisation [0003.730] I> hdmi_enable, HDMI initialisation complete [0003.740] initializing target [0003.740] calling apps_init() [0003.741] starting app kernel_boot_app [0003.742] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000704] Console: colour dummy device 80x25 [ 0.002243] printk: console [tty0] enabled [ 0.002304] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002339] pid_max: default: 32768 minimum: 301 [ 0.002620] LSM: Security Framework initializing [ 0.002679] Yama: becoming mindful. [ 0.002721] SELinux: Initializing. [ 0.002910] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002949] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006252] rcu: Hierarchical SRCU implementation. [ 0.006509] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007222] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007257] DTB Build time: Aug 10 2022 20:31:49 [ 0.009972] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010219] Remapping and enabling EFI services. [ 0.012625] smp: Bringing up secondary CPUs ... [ 0.042593] Detected PIPT I-cache on CPU1 [ 0.042710] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074218] Detected PIPT I-cache on CPU2 [ 0.074363] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104032] Detected PIPT I-cache on CPU3 [ 0.104171] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134009] Detected PIPT I-cache on CPU4 [ 0.134120] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163817] Detected PIPT I-cache on CPU5 [ 0.164044] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164441] smp: Brought up 1 node, 6 CPUs [ 0.164633] SMP: Total of 6 processors activated. [ 0.164671] CPU features: detected: Privileged Access Never [ 0.164691] CPU features: detected: LSE atomic instructions [ 0.164721] CPU features: detected: User Access Override [ 0.164733] CPU features: detected: 32-bit EL0 Support [ 0.164745] CPU features: detected: RAS Extension Support [ 0.164757] CPU features: detected: CRC32 instructions [ 0.164769] CPU features: detected: 32-bit EL1 Support [ 0.232208] CPU: All CPU(s) started at EL2 [ 0.238499] devtmpfs: initialized [ 0.309552] Registered cp15_barrier emulation handler [ 0.309652] Registered setend emulation handler [ 0.309686] KASLR enabled [ 0.310013] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.310065] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.312326] pinctrl core: initialized pinctrl subsystem [ 0.313874] SMBIOS 3.0.0 present. [ 0.313922] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.314789] NET: Registered protocol family 16 [ 0.317546] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.318307] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.319409] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.319511] audit: initializing netlink subsys (disabled) [ 0.319846] audit: type=2000 audit(0.316:1): state=initialized audit_enabled=0 res=1 [ 0.320540] thermal_sys: Registered thermal governor 'step_wise' [ 0.320549] thermal_sys: Registered thermal governor 'power_allocator' [ 0.320591] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.324219] cpuidle: using governor menu [ 0.324799] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.325287] ASID allocator initialised with 32768 entries [ 0.325649] Serial: AMBA PL011 UART driver [ 0.329542] Tegra reboot handler registered. [ 0.403932] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.404074] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.404316] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.404368] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.404528] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.404576] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.404710] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.404790] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.404933] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.404980] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.407253] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.407314] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.407364] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.407400] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.407436] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.407470] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.407515] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.407552] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.407583] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.407614] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.407645] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.407676] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.407721] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.407758] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.407790] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.407821] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.407852] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.407959] mc-err: mcerr ops are set to t19x [ 0.420858] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.420885] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.420906] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.420925] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.426927] ACPI: Interpreter disabled. [ 0.428078] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.429472] iommu: Default domain type: Translated [ 0.429557] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.429953] SCSI subsystem initialized [ 0.430137] usbcore: registered new interface driver usbfs [ 0.430179] usbcore: registered new interface driver hub [ 0.430211] usbcore: registered new device driver usb [ 0.430597] mc: Linux media interface: v0.10 [ 0.430625] videodev: Linux video capture interface: v2.00 [ 0.430946] pps_core: LinuxPPS API ver. 1 registered [ 0.430958] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.430984] PTP clock support registered [ 0.431204] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.431545] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.431600] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.432245] Registered efivars operations [ 0.438351] FPGA manager framework [ 0.438460] Advanced Linux Sound Architecture Driver Initialized. [ 0.439116] Bluetooth: Core ver 2.22 [ 0.439153] NET: Registered protocol family 31 [ 0.439165] Bluetooth: HCI device and connection manager initialized [ 0.439181] Bluetooth: HCI socket layer initialized [ 0.439193] Bluetooth: L2CAP socket layer initialized [ 0.439214] Bluetooth: SCO socket layer initialized [ 0.440661] camchar: rtcpu character device driver loaded [ 0.441473] clocksource: Switched to clocksource arch_sys_counter [ 0.735452] VFS: Disk quotas dquot_6.6.0 [ 0.735548] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.735827] pnp: PnP ACPI: disabled [ 0.745721] la/ptsa driver initialized. [ 0.745864] NET: Registered protocol family 2 [ 0.746045] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.752173] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.752289] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.752568] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.753003] TCP: Hash tables configured (established 65536 bind 65536) [ 0.753123] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.753214] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.753426] NET: Registered protocol family 1 [ 0.754430] RPC: Registered named UNIX socket transport module. [ 0.754469] RPC: Registered udp transport module. [ 0.754489] RPC: Registered tcp transport module. [ 0.754509] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.754543] PCI: CLS 0 bytes, default 64 [ 0.754839] Trying to unpack rootfs image as initramfs... [ 1.021502] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.024562] Freeing initrd memory: 8196K [ 1.029627] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.029661] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.029698] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.030148] kvm [1]: IPA Size Limit: 40 bits [ 1.030816] kvm [1]: vgic interrupt IRQ9 [ 1.031434] kvm [1]: VHE mode initialized successfully [ 1.032933] Initialise system trusted keyrings [ 1.033274] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.038841] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.039681] NFS: Registering the id_resolver key type [ 1.039721] Key type id_resolver registered [ 1.039758] Key type id_legacy registered [ 1.039869] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.039893] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.039961] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.049983] NET: Registered protocol family 38 [ 1.050008] Key type asymmetric registered [ 1.050023] Asymmetric key parser 'x509' registered [ 1.050071] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.050310] io scheduler mq-deadline registered [ 1.050329] io scheduler kyber registered [ 1.056730] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.059887] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.059996] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.060099] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.060174] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.060247] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.065135] scrncapt: init (heads:4 wins:6 planes:4) [ 1.065543] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.066361] EINJ: ACPI disabled. [ 1.069409] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.069438] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.069454] tegra-pmc: ### PMC reset level: L1 [ 1.069511] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.069594] tegra-pmc: PMC Prod config success [ 1.074465] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.079164] random: fast init done [ 1.080195] printk: console [ttyTCU0] enabled [ 2.631627] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.636142] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.640730] arm-smmu 10000000.iommu: stage 1 translation [ 2.646278] arm-smmu 10000000.iommu: stage 2 translation [ 2.651452] arm-smmu 10000000.iommu: nested translation [ 2.657061] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.663950] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.673775] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.677594] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.683894] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.691696] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.696935] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.701927] arm-smmu 12000000.iommu: stage 1 translation [ 2.707443] arm-smmu 12000000.iommu: stage 2 translation [ 2.712870] arm-smmu 12000000.iommu: nested translation [ 2.718277] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.725449] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.735038] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.738586] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.744883] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.752516] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.762261] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.765587] tegra_profiler: auth: init [ 2.769757] THERMAL EST: found 3 subdevs [ 2.773208] THERMAL EST num_resources: 0 [ 2.776821] [THERMAL EST subdev 0] [ 2.780396] [THERMAL EST subdev 1] [ 2.783565] [THERMAL EST subdev 2] [ 2.787055] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.793507] THERMAL EST: thz register success. [ 2.797742] THERMAL EST: end of probe, return err: 0 [ 2.802968] nvsciipc: loaded module [ 2.809347] tun: Universal TUN/TAP device driver, 1.6 [ 2.812306] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.818581] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.824423] e1000e: Intel(R) PRO/1000 Network Driver [ 2.829313] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.835163] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.840682] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.846888] PPP generic driver version 2.4.2 [ 2.851156] PPP BSD Compression module registered [ 2.855664] PPP Deflate Compression module registered [ 2.860909] PPP MPPE Compression module registered [ 2.865924] usbcore: registered new interface driver r8152 [ 2.871161] usbcore: registered new interface driver asix [ 2.876749] usbcore: registered new interface driver ax88179_178a [ 2.882874] usbcore: registered new interface driver cdc_ether [ 2.888572] usbcore: registered new interface driver net1080 [ 2.894436] usbcore: registered new interface driver cdc_subset [ 2.900464] usbcore: registered new interface driver zaurus [ 2.906157] usbcore: registered new interface driver cdc_ncm [ 2.911835] usbcore: registered new interface driver aqc111 [ 2.917170] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.923568] ohci-pci: OHCI PCI platform driver [ 2.927609] ohci-platform: OHCI generic platform driver [ 2.933543] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.939504] usbcore: registered new interface driver uas [ 2.944173] usbcore: registered new interface driver usb-storage [ 2.949934] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.955954] mousedev: PS/2 mouse device common for all mice [ 2.961299] usbcore: registered new interface driver xpad [ 2.969088] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.971828] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.979596] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.986317] i2c /dev entries driver [ 2.989688] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.995157] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.000662] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.006186] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.011292] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.017072] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.022220] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.036089] device-mapper: uevent: version 1.0.3 [ 3.036516] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.042841] cpuidle: Initializing cpuidle driver [ 3.046976] sdhci: Secure Digital Host Controller Interface driver [ 3.051480] sdhci: Copyright(c) Pierre Ossman [ 3.055758] Synopsys Designware Multimedia Card Interface Driver [ 3.061957] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.067679] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.068470] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.081173] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.103424] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.112621] vdd-1v0: supplied by regulator-dummy [ 3.118198] vdd-1v8-hs: supplied by regulator-dummy [ 3.123036] vdd-1v8-ls: supplied by regulator-dummy [ 3.127946] vdd-1v8-ao: supplied by regulator-dummy [ 3.131836] vddio-ddr-1v1: supplied by regulator-dummy [ 3.136309] vdd-rtc: supplied by regulator-dummy [ 3.138155] spmic-ldo1: supplied by regulator-dummy [ 3.139452] vdd-ao-3v3: supplied by regulator-dummy [ 3.145698] vddio-emmc-3v3: supplied by regulator-dummy [ 3.151953] spmic-ldo4: supplied by regulator-dummy [ 3.153197] vdd-usb-3v3: supplied by regulator-dummy [ 3.159401] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.165578] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.171150] spmic-ldo8: supplied by vdd-1v8-ls [ 3.172787] gpio-510 (gpio_default): hogged as output/high [ 3.174163] gpio-511 (gpio_default): hogged as output/high [ 3.177084] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.313457] max77686-rtc max77620-rtc: registered as rtc0 [ 3.314581] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.314919] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.139453] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.140546] hid: raw HID events driver (C) Jiri Kosina [ 4.141402] usbcore: registered new interface driver usbhid [ 4.141583] usbhid: USB HID core driver [ 4.143697] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.145103] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.164016] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.238303] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 75.094 ms) ÿá[ 4.229275] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.229925] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.230873] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.231532] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.233068] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.233880] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.234505] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.235752] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.236032] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.238638] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.245637] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.252219] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.256953] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.263401] denver_knobs_init:MTS_VERSION:55637613 [ 4.275414] t19x_cache tegra-cache: probed [ 4.278531] optee: probing for conduit method. [ 4.279376] optee: revision 3.16 (65cc2218) [ 4.280808] optee: dynamic shared memory is enabled [ 4.284730] optee: initialized driver [ 4.291869] nvpmodel: initialized successfully [ 4.292517] tegra_hv: get_hvd: not initialized yet [ 4.296868] user_ivc_mempool: hypervisor not present [ 4.302513] usbcore: registered new interface driver snd-usb-audio [ 4.309171] u32 classifier [ 4.310659] input device check on [ 4.314208] Actions configured [ 4.317580] Initializing XFRM netlink socket [ 4.322544] NET: Registered protocol family 10 [ 4.328518] Segment Routing with IPv6 [ 4.330133] NET: Registered protocol family 17 [ 4.334097] NET: Registered protocol family 15 [ 4.338827] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.352130] Bluetooth: RFCOMM socket layer initialized [ 4.356768] Bluetooth: RFCOMM ver 1.11 [ 4.360927] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.366527] Bluetooth: HIDP socket layer initialized [ 4.372480] 9pnet: Installing 9P2000 support [ 4.376270] Key type dns_resolver registered [ 4.381286] registered taskstats version 1 [ 4.384414] Loading compiled-in X.509 certificates [ 4.397804] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.400050] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.410533] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.412326] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.421171] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.429281] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.545546] tegra194-pcie 14160000.pcie: Link up [ 4.548512] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.548761] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.548944] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.549246] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.549443] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.549928] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.550425] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.568712] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.569173] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.569789] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.571264] pci 0004:01:00.0: supports D1 D2 [ 4.571397] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.582638] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.582969] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.583188] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.583677] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.583966] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.584167] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.584481] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.587797] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.596032] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.606617] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.610644] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.616330] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.623236] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.632153] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.634027] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.642665] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.650872] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.766117] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.766573] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.766744] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.766926] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.767158] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.767339] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.767707] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.768111] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.791200] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.791556] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.793146] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.794476] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.795896] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.797440] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.798461] pci 0005:00:00.0: Removing from iommu group 7 [ 5.798760] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.844526] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.869644] host1x 13e10000.host1x: initialized [ 5.871438] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.872368] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.873770] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.874487] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.875661] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.876416] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.877741] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.878418] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.879592] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.880199] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.881110] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.883354] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.893311] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.900312] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.910887] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.917828] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.927602] falcon 15340000.vic: Adding to iommu group 17 [ 5.942234] falcon 15340000.vic: initialized [ 5.943450] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.949623] falcon 15380000.nvjpg: initialized [ 5.950472] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.960359] falcon 154c0000.nvenc: initialized [ 5.961031] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.970313] falcon 15a80000.nvenc1: initialized [ 5.970918] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.982282] nvdec 15480000.nvdec: initialized [ 5.982976] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.993139] nvdec 15140000.nvdec1: initialized [ 5.993671] tsec 15500000.tsec: Adding to iommu group 18 [ 6.000019] tsec 15500000.tsec: initialized [ 6.000507] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.007572] tsec 15100000.tsecb: initialized [ 6.011424] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.039545] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.051854] gpio-374 (wifi-enable): hogged as output/high [ 6.052098] gpio-431 (camera-control-output-low): hogged as output/low [ 6.052443] gpio-432 (camera-control-output-low): hogged as output/low [ 6.054264] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.056079] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.056572] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.058445] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.063563] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.069412] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.074930] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.083211] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.090775] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.102114] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.107450] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.113364] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.122254] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.131354] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.138832] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.146236] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.152320] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.162572] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.168480] pva 16000000.pva0: Adding to iommu group 22 [ 6.195709] pva 16000000.pva0: initialized [ 6.200328] pva 16800000.pva1: Adding to iommu group 23 [ 6.219515] pva 16800000.pva1: initialized [ 6.223788] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.244195] nvdla 15880000.nvdla0: initialized [ 6.245729] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.254979] nvdla 158c0000.nvdla1: initialized [ 6.259709] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.260004] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.260237] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.260491] tegradc 15200000.display: Adding to iommu group 26 [ 6.260584] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.260598] tegradc 15210000.display: Adding to iommu group 26 [ 6.261286] tegradccommon 15200000.display-hub: dma mapping done [ 6.261872] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.262585] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.263948] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.268199] tegradc 15210000.display: disp0 connected to head1->sor [ 6.269509] tegra_cec 3960000.tegra_cec: probed [ 6.275931] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.281599] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.288292] tegradc 15210000.display: DT parsed successfully [ 6.296118] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.298853] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.306145] kfuse 3830000.kfuse: initialized [ 6.314394] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.318624] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.324762] generic_infoframe_type: 0x87 [ 6.330910] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.331448] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.334948] tegradc 15200000.display: DT parsed successfully [ 6.342043] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.347333] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.354155] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.365686] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.370545] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.375973] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.375994] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.385430] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.393940] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.401805] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.408914] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.427031] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.430871] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.435738] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.435856] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.448610] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.457583] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.462391] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.469682] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.499917] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.506980] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.514394] usb usb1: Product: xHCI Host Controller [ 6.519122] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.525325] usb usb1: SerialNumber: 3610000.xhci [ 6.531278] hub 1-0:1.0: USB hub found [ 6.534055] hub 1-0:1.0: 4 ports detected [ 6.538837] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.543863] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.551222] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.558815] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.566862] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.574108] usb usb2: Product: xHCI Host Controller [ 6.578787] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.585050] usb usb2: SerialNumber: 3610000.xhci [ 6.590561] hub 2-0:1.0: USB hub found [ 6.593524] hub 2-0:1.0: 4 ports detected [ 6.635160] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.640906] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.642478] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.642659] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.656233] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.657348] tegra194-cpufreq ccplex: probed with BWMGR [ 6.658619] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.659103] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.659581] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.660703] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.669869] tegra194-vi5 15c10000.vi: initialized [ 6.670300] mmc0: CQHCI version 5.10 [ 6.671858] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.671965] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.677695] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.683810] generic_infoframe_type: 0x87 [ 6.691936] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.695877] tegradc 15200000.display: DT parsed successfully [ 6.700005] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.702170] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.707695] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.715363] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.715369] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.721549] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.723135] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.730436] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.736709] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.736713] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.737082] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.743269] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.744717] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.749575] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.749783] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.765908] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.780719] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.784129] tegradc 15200000.display: probed [ 6.787090] nvethernet 2490000.ethernet: Macsec not supported [ 6.796349] mmc0: Command Queue Engine enabled [ 6.803308] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.807819] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.820405] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.826000] mmc0: periodic cache flush enabled [ 6.833653] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.838278] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.843929] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.849061] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.857666] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.863053] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.912226] Console: switching to colour frame buffer device 240x67 [ 6.918211] tegradc 15200000.display: fb registered [ 6.923002] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.929731] tegra-se-nvhost 15810000.se: initialized [ 6.930268] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.934316] random: crng init done [ 6.947122] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.947312] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.950704] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.955668] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.970253] tegra-se-nvhost 15820000.se: initialized [ 6.975945] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.980689] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.987166] tegra-se-nvhost 15830000.se: initialized [ 6.992786] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.998493] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.004714] tegra-se-nvhost 15840000.se: initialized [ 7.008765] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.010587] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.019244] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.025850] tegra_actmon d230000.actmon: in actmon_register()... [ 7.032126] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.032769] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.036040] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.036046] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.036050] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.036061] usb 1-2: Manufacturer: Generic [ 7.038149] hub 1-2:1.0: USB hub found [ 7.038250] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.038700] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.039382] hvc_sysfs: hypervisor is not present [ 7.045602] Extcon AUX1(HDMI) enable [ 7.054093] hub 1-2:1.0: 4 ports detected [ 7.061357] tegradc 15210000.display: disp1 connected to head1->sor [ 7.066103] ALSA device list: [ 7.066109] No soundcards found. [ 7.119579] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.127137] tegradc 15210000.display: DT parsed successfully [ 7.132679] tegradc 15210000.display: Display dc.000000004d18695f registered with id=1 [ 7.140672] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.146476] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.159440] tegradc 15210000.display: probed [ 7.159775] tegradc 15210000.display: fb registered [ 7.165615] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.166329] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.169378] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.169387] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.185254] Freeing unused kernel memory: 3968K [ 7.194821] tegradc 15210000.display: blank - powerdown ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.199964] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.199967] Extcon DP: HPD disabled [ 7.199971] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.199979] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.199984] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.200053] tegradc 15200000.display: blank - powerdown [ 7.210701] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.210708] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.210712] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.210716] usb 2-3: Manufacturer: Generic [ 7.217603] Run /init as init process [ 7.221267] hub 2-3:1.0: USB hub found [ 7.223451] hub 2-3:1.0: 4 ports detected [ 7.242458] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.242462] Extcon AUX1(HDMI) disable [ 7.265537] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.265542] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.265838] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.266707] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.277777] tegradc 15200000.display: unblank [ 7.278853] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.279059] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.285427] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.287302] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.291400] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.291404] Extcon AUX1(HDMI) enable [ 7.304097] tegradc 15200000.display: sync windows ret = 247 [ 7.329562] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.377985] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.385194] Extcon HDMI: HPD enabled [ 7.389120] tegradc 15200000.display: hdmi: plugged [ 7.428498] Root device found: mmcblk0p1 [ 7.431875] Found dev node: /dev/mmcblk0p1 [ 7.468050] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.473417] Rootfs mounted over mmcblk0p1 [ 7.509210] Switching from initrd to actual rootfs [ 7.530759] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.532109] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.533379] usb 1-3: Product: Bluetooth Radio [ 7.534623] usb 1-3: Manufacturer: Realtek [ 7.535818] usb 1-3: SerialNumber: 00e04c000001 [ 7.667691] systemd[1]: System time before build time, advancing clock. [ 7.740557] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.745235] systemd[1]: Detected architecture arm64. [ 7.799866] systemd[1]: Set hostname to . [ 7.965783] systemd-sysv-generator[242]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.319779] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.321395] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.326985] systemd[1]: Created slice system-modprobe.slice. [ 8.331444] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.335453] systemd[1]: Created slice User and Session Slice. [ 8.338951] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.343023] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.346229] systemd[1]: Reached target User and Group Name Lookups. [ 8.349285] systemd[1]: Reached target Slices. [ 8.352251] systemd[1]: Reached target Swap. [ 8.356102] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.359585] systemd[1]: Listening on Syslog Socket. [ 8.363000] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.366223] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.370295] systemd[1]: Listening on Journal Audit Socket. [ 8.373752] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.377338] systemd[1]: Listening on Journal Socket. [ 8.380922] systemd[1]: Listening on udev Control Socket. [ 8.384303] systemd[1]: Listening on udev Kernel Socket. [ 8.392719] systemd[1]: Mounting Huge Pages File System... [ 8.401177] systemd[1]: Mounting POSIX Message Queue File System... [ 8.409727] systemd[1]: Mounting RPC Pipe File System... [ 8.418320] systemd[1]: Mounting Kernel Debug File System... [ 8.429099] systemd[1]: Mounting Kernel Trace File System... [ 8.438913] systemd[1]: Starting Journal Service... [ 8.447797] systemd[1]: Starting Set the console keyboard layout... [ 8.455962] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.459585] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.466050] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.474548] systemd[1]: Started Nameserver information manager. [ 8.479211] systemd[1]: Reached target Network (Pre). [ 8.486432] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.488263] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.497348] systemd[1]: Starting Load Kernel Modules... [ 8.505289] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.513030] systemd[1]: Starting udev Coldplug all Devices... [ 8.524202] systemd[1]: Mounted Huge Pages File System. [ 8.527849] systemd[1]: Mounted POSIX Message Queue File System. [ 8.531465] systemd[1]: Mounted RPC Pipe File System. [ 8.535082] systemd[1]: Mounted Kernel Debug File System. [ 8.535675] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.537488] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.540262] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.540269] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.540282] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.540286] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.541219] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.541264] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.541403] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.541414] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.561175] systemd[1]: Mounted Kernel Trace File System. [ 8.567577] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.574874] systemd[1]: nvfb-udev.service: Succeeded. [ 8.579086] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.591007] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.603653] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.605377] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.612929] systemd[1]: Starting Load/Save Random Seed... [ 8.621036] systemd[1]: Starting Create System Users... [ 8.635359] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.635359] [ 8.671650] systemd[1]: Finished Load/Save Random Seed. [ 8.678466] systemd[1]: Finished Load Kernel Modules. [ 8.683221] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.690298] systemd[1]: Mounting Kernel Configuration File System... [ 8.698963] systemd[1]: Started OP-TEE Client Supplicant. [ 8.707676] systemd[1]: Starting Apply Kernel Variables... [ 8.715066] systemd[1]: Mounted Kernel Configuration File System. [ 8.726768] systemd[1]: Finished Create System Users. [ 8.733347] systemd[1]: Finished Set the console keyboard layout. [ 10.355450] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.364262] imx219 9-0010: board setup failed [ 10.365684] imx219: probe of 9-0010 failed with error -121 [ 10.387466] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.407058] imx219 10-0010: board setup failed [ 10.408508] imx219: probe of 10-0010 failed with error -121 [ 10.445548] hot-surface-alert cooling state: 0 -> 1 [ 10.571337] using random self ethernet address [ 10.572602] using random host ethernet address [ 12.109589] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.111298] Creating 1 MTD partitions on "spi6.0": [ 12.112931] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.496121] using random self ethernet address [ 12.497900] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.844552] nvidia: loading out-of-tree module taints kernel. [ 59.059390] watchdog: watchdog0: watchdog did not stop! [ 59.499756] Trying to unregister non-registered hwtime source [ 62.557163] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.558742] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERRýÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.907] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.951] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.325] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.493] I> virtual i2c enabled [0003.493] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.494] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.615] W> set volts not configured for 'vdd-1v8-hs' [0003.615] I> retrieved tmds range from prod_list_hdmi_soc [0003.622] E> invalid display type [0003.623] E> cannot find any other nvdisp nodes [0003.639] I> edid read success [0003.652] I> edid read success [0003.652] I> width = 640, height = 480, frequency = 25174825 [0003.652] I> width = 1920, height = 1080, frequency = 148500000 [0003.653] I> width = 1280, height = 768, frequency = 79500000 [0003.653] I> width = 1360, height = 768, frequency = 85500000 [0003.653] I> width = 720, height = 480, frequency = 26973026 [0003.657] I> width = 720, height = 576, frequency = 26973026 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.686] I> width = 720, height = 480, frequency = 26973026 [0003.691] I> width = 720, height = 576, frequency = 26973026 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 4096, height = 2160, frequency = 296703296 [0003.726] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.737] I> hdmi_enable, starting HDMI initialisation [0003.742] I> hdmi_enable, HDMI initialisation complete [0003.751] initializing target [0003.752] calling apps_init() [0003.753] starting app kernel_boot_app [0003.754] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000691] Console: colour dummy device 80x25 [ 0.002216] printk: console [tty0] enabled [ 0.002276] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002313] pid_max: default: 32768 minimum: 301 [ 0.002537] LSM: Security Framework initializing [ 0.002597] Yama: becoming mindful. [ 0.002636] SELinux: Initializing. [ 0.002800] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002868] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005822] rcu: Hierarchical SRCU implementation. [ 0.006084] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006738] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006774] DTB Build time: Aug 10 2022 20:31:49 [ 0.009499] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009738] Remapping and enabling EFI services. [ 0.011809] smp: Bringing up secondary CPUs ... [ 0.041811] Detected PIPT I-cache on CPU1 [ 0.041889] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071690] Detected PIPT I-cache on CPU2 [ 0.071766] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101373] Detected PIPT I-cache on CPU3 [ 0.101442] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131110] Detected PIPT I-cache on CPU4 [ 0.131209] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160853] Detected PIPT I-cache on CPU5 [ 0.160922] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161217] smp: Brought up 1 node, 6 CPUs [ 0.161446] SMP: Total of 6 processors activated. [ 0.161486] CPU features: detected: Privileged Access Never [ 0.161510] CPU features: detected: LSE atomic instructions [ 0.161543] CPU features: detected: User Access Override [ 0.161557] CPU features: detected: 32-bit EL0 Support [ 0.161571] CPU features: detected: RAS Extension Support [ 0.161584] CPU features: detected: CRC32 instructions [ 0.161598] CPU features: detected: 32-bit EL1 Support [ 0.228358] CPU: All CPU(s) started at EL2 [ 0.233195] devtmpfs: initialized [ 0.287613] Registered cp15_barrier emulation handler [ 0.287712] Registered setend emulation handler [ 0.287731] KASLR enabled [ 0.288028] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288060] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289465] pinctrl core: initialized pinctrl subsystem [ 0.290563] SMBIOS 3.0.0 present. [ 0.290593] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291313] NET: Registered protocol family 16 [ 0.293210] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293735] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294441] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294503] audit: initializing netlink subsys (disabled) [ 0.294825] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.295268] thermal_sys: Registered thermal governor 'step_wise' [ 0.295274] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295290] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298075] cpuidle: using governor menu [ 0.298338] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.298789] ASID allocator initialised with 32768 entries [ 0.299049] Serial: AMBA PL011 UART driver [ 0.302278] Tegra reboot handler registered. [ 0.364356] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.364487] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.364657] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.364696] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.364816] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.364854] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.364965] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.365026] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.365175] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.365230] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.368035] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.368076] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.368112] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.368181] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.368212] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.368238] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.368274] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.368321] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.368349] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.368374] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.368400] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.368424] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.368448] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.368472] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.368495] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.368518] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.368540] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.368624] mc-err: mcerr ops are set to t19x [ 0.380200] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.380223] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.380235] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.380264] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.386711] ACPI: Interpreter disabled. [ 0.387875] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.389148] iommu: Default domain type: Translated [ 0.389239] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.389578] SCSI subsystem initialized [ 0.389775] usbcore: registered new interface driver usbfs [ 0.389836] usbcore: registered new interface driver hub [ 0.389876] usbcore: registered new device driver usb [ 0.390316] mc: Linux media interface: v0.10 [ 0.390351] videodev: Linux video capture interface: v2.00 [ 0.390685] pps_core: LinuxPPS API ver. 1 registered [ 0.390703] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.390749] PTP clock support registered [ 0.390989] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.391327] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.391403] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.392140] Registered efivars operations [ 0.397004] FPGA manager framework [ 0.397103] Advanced Linux Sound Architecture Driver Initialized. [ 0.397688] Bluetooth: Core ver 2.22 [ 0.397732] NET: Registered protocol family 31 [ 0.397749] Bluetooth: HCI device and connection manager initialized [ 0.397770] Bluetooth: HCI socket layer initialized [ 0.397787] Bluetooth: L2CAP socket layer initialized [ 0.397812] Bluetooth: SCO socket layer initialized [ 0.399448] camchar: rtcpu character device driver loaded [ 0.400245] clocksource: Switched to clocksource arch_sys_counter [ 0.696496] VFS: Disk quotas dquot_6.6.0 [ 0.696572] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.696903] pnp: PnP ACPI: disabled [ 0.707751] la/ptsa driver initialized. [ 0.707891] NET: Registered protocol family 2 [ 0.708050] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.713597] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.713721] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.713982] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.714410] TCP: Hash tables configured (established 65536 bind 65536) [ 0.714543] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.714637] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.714853] NET: Registered protocol family 1 [ 0.715461] RPC: Registered named UNIX socket transport module. [ 0.715475] RPC: Registered udp transport module. [ 0.715485] RPC: Registered tcp transport module. [ 0.715494] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.715511] PCI: CLS 0 bytes, default 64 [ 0.715757] Trying to unpack rootfs image as initramfs... [ 0.890082] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.892091] Freeing initrd memory: 8196K [ 0.896492] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.896527] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.896580] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.897019] kvm [1]: IPA Size Limit: 40 bits [ 0.897642] kvm [1]: vgic interrupt IRQ9 [ 0.898180] kvm [1]: VHE mode initialized successfully [ 0.899746] Initialise system trusted keyrings [ 0.900121] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.906610] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.907445] NFS: Registering the id_resolver key type [ 0.907480] Key type id_resolver registered [ 0.907494] Key type id_legacy registered [ 0.907613] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.907637] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.907703] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.917238] NET: Registered protocol family 38 [ 0.917260] Key type asymmetric registered [ 0.917303] Asymmetric key parser 'x509' registered [ 0.917364] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.917657] io scheduler mq-deadline registered [ 0.917675] io scheduler kyber registered [ 0.924105] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.927188] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.927273] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.927347] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.927443] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.927546] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.934374] scrncapt: init (heads:4 wins:6 planes:4) [ 0.934639] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.935752] EINJ: ACPI disabled. [ 0.939939] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.939966] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.939979] tegra-pmc: ### PMC reset level: L1 [ 0.939992] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.940042] tegra-pmc: PMC Prod config success [ 0.945171] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.951209] random: fast init done [ 0.951529] printk: console [ttyTCU0] enabled [ 2.503123] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.507767] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.512041] arm-smmu 10000000.iommu: stage 1 translation [ 2.517615] arm-smmu 10000000.iommu: stage 2 translation [ 2.523319] arm-smmu 10000000.iommu: nested translation [ 2.528417] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.535576] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.546490] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.548923] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.555228] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.562916] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.568266] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.573012] arm-smmu 12000000.iommu: stage 1 translation [ 2.578515] arm-smmu 12000000.iommu: stage 2 translation [ 2.583922] arm-smmu 12000000.iommu: nested translation [ 2.589613] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.596793] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.607187] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.609651] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.616489] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.623952] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.633472] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.636932] tegra_profiler: auth: init [ 2.641274] THERMAL EST: found 3 subdevs [ 2.644307] THERMAL EST num_resources: 0 [ 2.648122] [THERMAL EST subdev 0] [ 2.651723] [THERMAL EST subdev 1] [ 2.654879] [THERMAL EST subdev 2] [ 2.658147] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.664634] THERMAL EST: thz register success. [ 2.668824] THERMAL EST: end of probe, return err: 0 [ 2.674452] nvsciipc: loaded module [ 2.681930] tun: Universal TUN/TAP device driver, 1.6 [ 2.683918] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.689892] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.695448] e1000e: Intel(R) PRO/1000 Network Driver [ 2.700637] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.706462] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.712010] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.718076] PPP generic driver version 2.4.2 [ 2.722179] PPP BSD Compression module registered [ 2.726995] PPP Deflate Compression module registered [ 2.732237] PPP MPPE Compression module registered [ 2.737250] usbcore: registered new interface driver r8152 [ 2.742759] usbcore: registered new interface driver asix [ 2.747836] usbcore: registered new interface driver ax88179_178a [ 2.753956] usbcore: registered new interface driver cdc_ether [ 2.760164] usbcore: registered new interface driver net1080 [ 2.765507] usbcore: registered new interface driver cdc_subset [ 2.771802] usbcore: registered new interface driver zaurus [ 2.777505] usbcore: registered new interface driver cdc_ncm [ 2.783204] usbcore: registered new interface driver aqc111 [ 2.788951] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.794659] ohci-pci: OHCI PCI platform driver [ 2.799229] ohci-platform: OHCI generic platform driver [ 2.805093] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.811567] usbcore: registered new interface driver uas [ 2.815245] usbcore: registered new interface driver usb-storage [ 2.821703] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.827445] mousedev: PS/2 mouse device common for all mice [ 2.832387] usbcore: registered new interface driver xpad [ 2.840687] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.843410] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.851192] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.857785] i2c /dev entries driver [ 2.861103] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.866825] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.872057] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.877569] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.882902] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.888503] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.893877] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.907793] device-mapper: uevent: version 1.0.3 [ 2.908333] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.914456] cpuidle: Initializing cpuidle driver [ 2.918190] sdhci: Secure Digital Host Controller Interface driver [ 2.923038] sdhci: Copyright(c) Pierre Ossman [ 2.927087] Synopsys Designware Multimedia Card Interface Driver [ 2.933296] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.938980] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.939651] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.952143] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.969872] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.978738] vdd-1v0: supplied by regulator-dummy [ 2.984087] vdd-1v8-hs: supplied by regulator-dummy [ 2.988762] vdd-1v8-ls: supplied by regulator-dummy [ 2.993507] vdd-1v8-ao: supplied by regulator-dummy [ 2.997272] vddio-ddr-1v1: supplied by regulator-dummy [ 3.001526] vdd-rtc: supplied by regulator-dummy [ 3.003095] spmic-ldo1: supplied by regulator-dummy [ 3.004267] vdd-ao-3v3: supplied by regulator-dummy [ 3.010388] vddio-emmc-3v3: supplied by regulator-dummy [ 3.016462] spmic-ldo4: supplied by regulator-dummy [ 3.017549] vdd-usb-3v3: supplied by regulator-dummy [ 3.024037] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.030077] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.035469] spmic-ldo8: supplied by vdd-1v8-ls [ 3.036866] gpio-510 (gpio_default): hogged as output/high [ 3.038967] gpio-511 (gpio_default): hogged as output/high [ 3.045847] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.184941] max77686-rtc max77620-rtc: registered as rtc0 [ 3.186186] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.186503] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.914154] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.915405] hid: raw HID events driver (C) Jiri Kosina [ 3.916109] usbcore: registered new interface driver usbhid [ 3.916289] usbhid: USB HID core driver [ 3.918601] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.919742] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.966635] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.041204] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 75.379 ms) ÿá[ 4.004083] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.004707] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.005844] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.006524] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.008368] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.009011] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.009557] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.010780] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.011016] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.012832] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.013935] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.014033] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.021014] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.021038] tegra-hsp b950000.tegra-hsp: Try increasing MBOX_TX_QUEUE_LEN [ 4.047700] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.054077] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.058416] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.065571] denver_knobs_init:MTS_VERSION:55637613 [ 4.078778] t19x_cache tegra-cache: probed [ 4.081532] optee: probing for conduit method. [ 4.082362] optee: revision 3.16 (65cc2218) [ 4.083278] optee: dynamic shared memory is enabled [ 4.086444] optee: initialized driver [ 4.092614] nvpmodel: initialized successfully [ 4.093782] tegra_hv: get_hvd: not initialized yet [ 4.098728] user_ivc_mempool: hypervisor not present [ 4.105042] usbcore: registered new interface driver snd-usb-audio [ 4.111098] u32 classifier [ 4.112570] input device check on [ 4.116226] Actions configured [ 4.119644] Initializing XFRM netlink socket [ 4.124482] NET: Registered protocol family 10 [ 4.130935] Segment Routing with IPv6 [ 4.132132] NET: Registered protocol family 17 [ 4.136191] NET: Registered protocol family 15 [ 4.140816] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.154587] Bluetooth: RFCOMM socket layer initialized [ 4.158914] Bluetooth: RFCOMM ver 1.11 [ 4.162983] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.168627] Bluetooth: HIDP socket layer initialized [ 4.174447] 9pnet: Installing 9P2000 support [ 4.178006] Key type dns_resolver registered [ 4.183526] registered taskstats version 1 [ 4.186713] Loading compiled-in X.509 certificates [ 4.198564] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.202453] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.212176] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.214487] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.223238] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.231339] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.348327] tegra194-pcie 14160000.pcie: Link up [ 4.351261] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.351468] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.351618] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.351916] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.352112] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.352524] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.352946] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.362895] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.363310] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.363776] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.365335] pci 0004:01:00.0: supports D1 D2 [ 4.365520] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.374594] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.374897] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.375142] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.375569] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.375846] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.377090] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.383302] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.390258] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.399078] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.409044] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.413883] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.419159] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.426264] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.435139] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.437087] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.445238] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.453966] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.544419] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.544969] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.545168] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.545424] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.545671] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.545899] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.546293] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.546712] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.564595] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.564881] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.566564] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.567977] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.569381] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.570672] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.571583] pci 0005:00:00.0: Removing from iommu group 7 [ 5.571856] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.603138] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.627536] host1x 13e10000.host1x: initialized [ 5.629488] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.630441] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.631573] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.632421] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.633400] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.633995] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.634972] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.635496] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.637849] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.644370] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.654395] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.661664] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.671647] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.678254] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.688730] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.695636] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.705649] falcon 15340000.vic: Adding to iommu group 17 [ 5.719305] falcon 15340000.vic: initialized [ 5.720312] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.725610] falcon 15380000.nvjpg: initialized [ 5.726142] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.737939] falcon 154c0000.nvenc: initialized [ 5.738477] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.747717] falcon 15a80000.nvenc1: initialized [ 5.748420] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.761145] nvdec 15480000.nvdec: initialized [ 5.761797] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.771642] nvdec 15140000.nvdec1: initialized [ 5.772313] tsec 15500000.tsec: Adding to iommu group 18 [ 5.777698] tsec 15500000.tsec: initialized [ 5.778203] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.785721] tsec 15100000.tsecb: initialized [ 5.789603] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.815212] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.826880] gpio-374 (wifi-enable): hogged as output/high [ 5.827149] gpio-431 (camera-control-output-low): hogged as output/low [ 5.827403] gpio-432 (camera-control-output-low): hogged as output/low [ 5.829021] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.830533] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.831033] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.836328] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.841610] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.847850] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.853646] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.861602] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.869303] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.880395] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.885887] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.891418] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.900286] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.909910] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.917080] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.924666] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.930572] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.940745] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.946531] pva 16000000.pva0: Adding to iommu group 22 [ 5.974419] pva 16000000.pva0: initialized [ 5.978982] pva 16800000.pva1: Adding to iommu group 23 [ 5.989747] pva 16800000.pva1: initialized [ 5.993733] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.005383] nvdla 15880000.nvdla0: initialized [ 6.006580] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.015600] nvdla 158c0000.nvdla1: initialized [ 6.018389] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.018420] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.018675] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.019121] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.019485] tegradccommon 15200000.display-hub: dma mapping done [ 6.019501] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.019589] tegradc 15200000.display: Adding to iommu group 26 [ 6.028019] tegradc 15210000.display: Adding to iommu group 26 [ 6.028114] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.028462] generic_infoframe_type: 0x87 [ 6.028579] tegradc 15200000.display: DT parsed successfully [ 6.028694] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.030507] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.037797] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.042830] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.046347] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.046366] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.047594] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.052080] tegra_cec 3960000.tegra_cec: probed [ 6.060259] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.061907] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.067162] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.077961] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.082624] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.089480] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.097004] kfuse 3830000.kfuse: initialized [ 6.104677] tegradc 15210000.display: disp0 connected to head1->sor [ 6.108099] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.113583] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.124313] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.130102] tegradc 15210000.display: DT parsed successfully [ 6.137599] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.143547] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.154022] random: crng init done [ 6.204720] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.214904] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.219688] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.229647] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.234521] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.255139] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.255511] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.257788] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.265949] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.274844] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.280945] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.288692] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.295851] usb usb1: Product: xHCI Host Controller [ 6.301081] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.307126] usb usb1: SerialNumber: 3610000.xhci [ 6.312688] hub 1-0:1.0: USB hub found [ 6.315911] hub 1-0:1.0: 4 ports detected [ 6.320571] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.325088] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.332945] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.340627] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.348275] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.355512] usb usb2: Product: xHCI Host Controller [ 6.360765] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.366975] usb usb2: SerialNumber: 3610000.xhci [ 6.372329] hub 2-0:1.0: USB hub found [ 6.375418] hub 2-0:1.0: 4 ports detected [ 6.418921] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.425531] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.427050] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.427267] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.440024] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.441186] tegra194-cpufreq ccplex: probed with BWMGR [ 6.442326] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.442925] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.443444] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.444556] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.453217] tegra194-vi5 15c10000.vi: initialized [ 6.453861] mmc0: CQHCI version 5.10 [ 6.454200] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.455691] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.459376] generic_infoframe_type: 0x87 [ 6.465641] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.469222] tegradc 15200000.display: DT parsed successfully [ 6.477308] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.477318] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.477323] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.477327] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.488319] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.489725] tegradc 15200000.display: Display dc.00000000c8485757 registered with id=0 [ 6.496092] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.503893] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.509250] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.528237] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.530343] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.561514] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.561990] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.570111] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.583356] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.588257] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.589602] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.596229] nvethernet 2490000.ethernet: Macsec not supported [ 6.607933] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.614015] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.620019] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.622368] tegradc 15200000.display: probed [ 6.629406] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.646487] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.647771] mmc0: Command Queue Engine enabled [ 6.653386] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.657390] mmc0: periodic cache flush enabled [ 6.657412] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.665848] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.669495] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.686647] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.688095] tegra-se-nvhost 15810000.se: initialized [ 6.698639] Console: switching to colour frame buffer device 240x67 [ 6.703172] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.704730] tegradc 15200000.display: fb registered [ 6.704804] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.707320] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.711413] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.716572] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.722173] tegra-se-nvhost 15820000.se: initialized [ 6.729627] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.737763] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.756044] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.759094] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.766866] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.766876] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.785252] usb 1-2: Manufacturer: Generic [ 6.789326] tegra-se-nvhost 15830000.se: initialized [ 6.791374] hub 1-2:1.0: USB hub found [ 6.795366] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.799305] hub 1-2:1.0: 4 ports detected [ 6.805099] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.808121] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.809237] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.815734] tegra-se-nvhost 15840000.se: initialized [ 6.823681] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.833242] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.836762] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.845945] tegra_actmon d230000.actmon: in actmon_register()... [ 6.849998] Extcon AUX1(HDMI) enable [ 6.863489] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.867159] tegradc 15210000.display: disp1 connected to head1->sor [ 6.872512] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.878340] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.887220] hvc_sysfs: hypervisor is not present [ 6.893399] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.896321] tegradc 15210000.display: DT parsed successfully [ 6.896363] tegradc 15210000.display: Display dc.00000000c28a7fdb registered with id=1 [ 6.896486] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.896492] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.924350] ALSA device list: [ 6.926710] tegradc 15210000.display: probed [ 6.931793] No soundcards found. [ 6.942747] tegradc 15210000.display: fb registered [ 6.946138] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.955240] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.955250] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.961523] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.963814] Freeing unused kernel memory: 3968K [ 6.968274] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.968279] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.968283] usb 2-3: Manufacturer: Generic [ 6.978890] hub 2-3:1.0: USB hub found [ 6.993177] Run /init as init process [ 6.999241] hub 2-3:1.0: 4 ports detected [ 7.008901] tegradc 15210000.display: blank - powerdown ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.014065] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.014069] Extcon DP: HPD disabled [ 7.014074] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.014087] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.014093] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.014163] tegradc 15200000.display: blank - powerdown [ 7.058493] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.058497] Extcon AUX1(HDMI) disable [ 7.072276] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.072281] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.080251] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.081911] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.082778] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.094622] tegradc 15200000.display: unblank [ 7.095676] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.095865] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.101828] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.103686] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.107679] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.107683] Extcon AUX1(HDMI) enable [ 7.120472] tegradc 15200000.display: sync windows ret = 246 [ 7.164439] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.166429] Extcon HDMI: HPD enabled [ 7.169880] tegradc 15200000.display: hdmi: plugged [ 7.210998] Root device found: mmcblk0p1 [ 7.214752] Found dev node: /dev/mmcblk0p1 [ 7.229314] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.230854] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.232350] usb 1-3: Product: Bluetooth Radio [ 7.233787] usb 1-3: Manufacturer: Realtek [ 7.235179] usb 1-3: SerialNumber: 00e04c000001 [ 7.257038] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.262547] Rootfs mounted over mmcblk0p1 [ 7.298849] Switching from initrd to actual rootfs [ 7.457431] systemd[1]: System time before build time, advancing clock. [ 7.530657] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.535681] systemd[1]: Detected architecture arm64. [ 7.587035] systemd[1]: Set hostname to . [ 7.753352] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.098634] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.100469] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.106074] systemd[1]: Created slice system-modprobe.slice. [ 8.110916] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.115173] systemd[1]: Created slice User and Session Slice. [ 8.118689] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.123017] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.126638] systemd[1]: Reached target User and Group Name Lookups. [ 8.129933] systemd[1]: Reached target Slices. [ 8.133122] systemd[1]: Reached target Swap. [ 8.137240] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.140955] systemd[1]: Listening on Syslog Socket. [ 8.144607] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.148045] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.153503] systemd[1]: Listening on Journal Audit Socket. [ 8.158701] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.162537] systemd[1]: Listening on Journal Socket. [ 8.166297] systemd[1]: Listening on udev Control Socket. [ 8.169853] systemd[1]: Listening on udev Kernel Socket. [ 8.178566] systemd[1]: Mounting Huge Pages File System... [ 8.186944] systemd[1]: Mounting POSIX Message Queue File System... [ 8.195180] systemd[1]: Mounting RPC Pipe File System... [ 8.204196] systemd[1]: Mounting Kernel Debug File System... [ 8.213068] systemd[1]: Mounting Kernel Trace File System... [ 8.223320] systemd[1]: Starting Journal Service... [ 8.232493] systemd[1]: Starting Set the console keyboard layout... [ 8.240872] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.244491] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.251183] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.259300] systemd[1]: Started Nameserver information manager. [ 8.264120] systemd[1]: Reached target Network (Pre). [ 8.271067] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.273077] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.279375] systemd[1]: Starting Load Kernel Modules... [ 8.287832] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.296160] systemd[1]: Starting udev Coldplug all Devices... [ 8.306855] systemd[1]: Mounted Huge Pages File System. [ 8.311003] systemd[1]: Mounted POSIX Message Queue File System. [ 8.314963] systemd[1]: Mounted RPC Pipe File System. [ 8.319891] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.319978] systemd[1]: Mounted Kernel Debug File System. [ 8.321144] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.321954] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.326269] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.326286] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.326290] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.326550] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.328133] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.334203] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.334215] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.342079] systemd[1]: Mounted Kernel Trace File System. [ 8.348894] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.354186] systemd[1]: nvfb-udev.service: Succeeded. [ 8.359008] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.370712] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.383064] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.385330] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.392061] systemd[1]: Starting Load/Save Random Seed... [ 8.400779] systemd[1]: Starting Create System Users... [ 8.433116] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.433116] [ 8.458744] systemd[1]: Finished Create System Users. [ 8.466811] systemd[1]: Finished Load Kernel Modules. [ 8.473354] systemd[1]: Finished Load/Save Random Seed. [ 8.478016] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.484795] systemd[1]: Mounting Kernel Configuration File System... [ 8.492556] systemd[1]: Started OP-TEE Client Supplicant. [ 8.501624] systemd[1]: Starting Apply Kernel Variables... [ 8.510534] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.520439] systemd[1]: Finished Set the console keyboard layout. [ 8.524640] systemd[1]: Mounted Kernel Configuration File System. [ 9.776480] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.782991] imx219 9-0010: board setup failed [ 9.784360] imx219: probe of 9-0010 failed with error -121 [ 9.807569] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.812777] imx219 10-0010: board setup failed [ 9.814089] imx219: probe of 10-0010 failed with error -121 [ 9.963585] hot-surface-alert cooling state: 0 -> 1 [ 10.599869] using random self ethernet address [ 10.604490] using random host ethernet address [ 11.459513] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.461223] Creating 1 MTD partitions on "spi6.0": [ 11.462794] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.063998] using random self ethernet address [ 12.065699] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.890993] nvidia: loading out-of-tree module taints kernel. [ 58.698253] watchdog: watchdog0: watchdog did not stop! [ 59.149878] Trying to unregister non-registered hwtime source [ 62.206808] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.208295] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.589] I> regulator 'vdd-hdmi-5v0' already enabled [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> hdmi cable connected [0003.599] W> set volts not configured for 'vdd-1v0' [0003.603] W> set volts not configured for 'vdd-1v8-hs' [0003.604] I> retrieved tmds range from prod_list_hdmi_soc [0003.608] E> invalid display type [0003.610] E> cannot find any other nvdisp nodes [0003.627] I> edid read success [0003.639] I> edid read success [0003.639] I> width = 640, height = 480, frequency = 25174825 [0003.640] I> width = 1920, height = 1080, frequency = 148500000 [0003.640] I> width = 1280, height = 768, frequency = 79500000 [0003.640] I> width = 1360, height = 768, frequency = 85500000 [0003.641] I> width = 720, height = 480, frequency = 26973026 [0003.645] I> width = 720, height = 576, frequency = 26973026 [0003.650] I> width = 1280, height = 720, frequency = 74175824 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1920, height = 1080, frequency = 148351648 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 720, height = 480, frequency = 26973026 [0003.679] I> width = 720, height = 576, frequency = 26973026 [0003.684] I> width = 3840, height = 2160, frequency = 296703296 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 4096, height = 2160, frequency = 296703296 [0003.713] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.724] I> hdmi_enable, starting HDMI initialisation [0003.729] I> hdmi_enable, HDMI initialisation complete [0003.738] initializing target [0003.739] calling apps_init() [0003.740] starting app kernel_boot_app [0003.741] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000788] Console: colour dummy device 80x25 [ 0.002292] printk: console [tty0] enabled [ 0.002358] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002420] pid_max: default: 32768 minimum: 301 [ 0.002604] LSM: Security Framework initializing [ 0.002662] Yama: becoming mindful. [ 0.002723] SELinux: Initializing. [ 0.002905] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002942] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006504] rcu: Hierarchical SRCU implementation. [ 0.006800] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007703] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007739] DTB Build time: Aug 10 2022 20:31:49 [ 0.010525] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010815] Remapping and enabling EFI services. [ 0.012883] smp: Bringing up secondary CPUs ... [ 0.043741] Detected PIPT I-cache on CPU1 [ 0.043851] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073407] Detected PIPT I-cache on CPU2 [ 0.073557] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103261] Detected PIPT I-cache on CPU3 [ 0.103402] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133312] Detected PIPT I-cache on CPU4 [ 0.133409] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163351] Detected PIPT I-cache on CPU5 [ 0.163456] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163748] smp: Brought up 1 node, 6 CPUs [ 0.163956] SMP: Total of 6 processors activated. [ 0.164014] CPU features: detected: Privileged Access Never [ 0.164034] CPU features: detected: LSE atomic instructions [ 0.164047] CPU features: detected: User Access Override [ 0.164060] CPU features: detected: 32-bit EL0 Support [ 0.164071] CPU features: detected: RAS Extension Support [ 0.164083] CPU features: detected: CRC32 instructions [ 0.164095] CPU features: detected: 32-bit EL1 Support [ 0.236190] CPU: All CPU(s) started at EL2 [ 0.242614] devtmpfs: initialized [ 0.289206] Registered cp15_barrier emulation handler [ 0.289323] Registered setend emulation handler [ 0.289342] KASLR enabled [ 0.289605] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289630] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290851] pinctrl core: initialized pinctrl subsystem [ 0.291835] SMBIOS 3.0.0 present. [ 0.291864] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292521] NET: Registered protocol family 16 [ 0.294372] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.294880] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295843] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295904] audit: initializing netlink subsys (disabled) [ 0.296198] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296669] thermal_sys: Registered thermal governor 'step_wise' [ 0.296675] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296690] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299895] cpuidle: using governor menu [ 0.300178] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300557] ASID allocator initialised with 32768 entries [ 0.300798] Serial: AMBA PL011 UART driver [ 0.304399] Tegra reboot handler registered. [ 0.378835] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.378951] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.379154] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.379196] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.379344] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.379382] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.379501] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.379538] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.379663] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.379702] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.381828] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.381862] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.381888] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.381914] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.381941] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.381966] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.382005] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.382036] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.382059] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.382081] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.382103] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.382125] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.382147] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.382169] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.382191] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.382218] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.382240] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.382368] mc-err: mcerr ops are set to t19x [ 0.395486] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.395509] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.395525] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.395537] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.402324] ACPI: Interpreter disabled. [ 0.403496] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.404861] iommu: Default domain type: Translated [ 0.404940] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.405334] SCSI subsystem initialized [ 0.405505] usbcore: registered new interface driver usbfs [ 0.405551] usbcore: registered new interface driver hub [ 0.405592] usbcore: registered new device driver usb [ 0.405994] mc: Linux media interface: v0.10 [ 0.406025] videodev: Linux video capture interface: v2.00 [ 0.406380] pps_core: LinuxPPS API ver. 1 registered [ 0.406392] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.406429] PTP clock support registered [ 0.406640] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.406948] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.407034] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.407692] Registered efivars operations [ 0.414531] FPGA manager framework [ 0.414728] Advanced Linux Sound Architecture Driver Initialized. [ 0.415639] Bluetooth: Core ver 2.22 [ 0.415701] NET: Registered protocol family 31 [ 0.415724] Bluetooth: HCI device and connection manager initialized [ 0.415764] Bluetooth: HCI socket layer initialized [ 0.415816] Bluetooth: L2CAP socket layer initialized [ 0.415847] Bluetooth: SCO socket layer initialized [ 0.418473] camchar: rtcpu character device driver loaded [ 0.419522] clocksource: Switched to clocksource arch_sys_counter [ 0.829072] VFS: Disk quotas dquot_6.6.0 [ 0.829157] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.829714] pnp: PnP ACPI: disabled [ 0.846191] la/ptsa driver initialized. [ 0.846345] NET: Registered protocol family 2 [ 0.846599] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.855144] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.855302] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.855720] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.856342] TCP: Hash tables configured (established 65536 bind 65536) [ 0.856524] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.856667] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.856939] NET: Registered protocol family 1 [ 0.857532] RPC: Registered named UNIX socket transport module. [ 0.857556] RPC: Registered udp transport module. [ 0.857569] RPC: Registered tcp transport module. [ 0.857581] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.857602] PCI: CLS 0 bytes, default 64 [ 0.857869] Trying to unpack rootfs image as initramfs... [ 1.128978] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.131865] Freeing initrd memory: 8196K [ 1.137006] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.137048] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.137087] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.137490] kvm [1]: IPA Size Limit: 40 bits [ 1.138049] kvm [1]: vgic interrupt IRQ9 [ 1.138757] kvm [1]: VHE mode initialized successfully [ 1.140638] Initialise system trusted keyrings [ 1.141000] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.148758] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.149651] NFS: Registering the id_resolver key type [ 1.149690] Key type id_resolver registered [ 1.149704] Key type id_legacy registered [ 1.149791] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.149814] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.149885] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.159930] NET: Registered protocol family 38 [ 1.159957] Key type asymmetric registered [ 1.159973] Asymmetric key parser 'x509' registered [ 1.160041] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.160256] io scheduler mq-deadline registered [ 1.160273] io scheduler kyber registered [ 1.166674] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.169888] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.170003] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.170119] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.170202] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.170273] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.176490] scrncapt: init (heads:4 wins:6 planes:4) [ 1.176744] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.177682] EINJ: ACPI disabled. [ 1.180926] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.180951] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.180965] tegra-pmc: ### PMC reset level: L1 [ 1.180978] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.181035] tegra-pmc: PMC Prod config success [ 1.186635] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.193285] random: fast init done [ 1.203759] printk: console [ttyTCU0] enabled [ 2.744089] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.748709] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.753315] arm-smmu 10000000.iommu: stage 1 translation [ 2.758508] arm-smmu 10000000.iommu: stage 2 translation [ 2.764274] arm-smmu 10000000.iommu: nested translation [ 2.769360] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.776793] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.787707] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.789629] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.796497] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.803988] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.809519] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.814263] arm-smmu 12000000.iommu: stage 1 translation [ 2.819752] arm-smmu 12000000.iommu: stage 2 translation [ 2.825178] arm-smmu 12000000.iommu: nested translation [ 2.830360] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.837781] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.848548] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.850617] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.857466] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.864609] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.874582] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.877943] tegra_profiler: auth: init [ 2.882151] THERMAL EST: found 3 subdevs [ 2.885317] THERMAL EST num_resources: 0 [ 2.889407] [THERMAL EST subdev 0] [ 2.892465] [THERMAL EST subdev 1] [ 2.896135] [THERMAL EST subdev 2] [ 2.899109] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.905588] THERMAL EST: thz register success. [ 2.910076] THERMAL EST: end of probe, return err: 0 [ 2.915352] nvsciipc: loaded module [ 2.922353] tun: Universal TUN/TAP device driver, 1.6 [ 2.924534] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.930931] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.936733] e1000e: Intel(R) PRO/1000 Network Driver [ 2.941635] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.947460] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.953006] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.959139] PPP generic driver version 2.4.2 [ 2.963438] PPP BSD Compression module registered [ 2.968008] PPP Deflate Compression module registered [ 2.973227] PPP MPPE Compression module registered [ 2.978008] usbcore: registered new interface driver r8152 [ 2.983751] usbcore: registered new interface driver asix [ 2.988839] usbcore: registered new interface driver ax88179_178a [ 2.994952] usbcore: registered new interface driver cdc_ether [ 3.000905] usbcore: registered new interface driver net1080 [ 3.006502] usbcore: registered new interface driver cdc_subset [ 3.012797] usbcore: registered new interface driver zaurus [ 3.018498] usbcore: registered new interface driver cdc_ncm [ 3.024170] usbcore: registered new interface driver aqc111 [ 3.029821] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.035633] ohci-pci: OHCI PCI platform driver [ 3.040194] ohci-platform: OHCI generic platform driver [ 3.046043] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.052139] usbcore: registered new interface driver uas [ 3.056254] usbcore: registered new interface driver usb-storage [ 3.062628] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.068352] mousedev: PS/2 mouse device common for all mice [ 3.073384] usbcore: registered new interface driver xpad [ 3.081671] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.084419] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.091916] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.098749] i2c /dev entries driver [ 3.102083] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.108272] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.113213] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.118562] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.123939] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.129182] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.134830] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.148793] device-mapper: uevent: version 1.0.3 [ 3.149291] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.155317] cpuidle: Initializing cpuidle driver [ 3.159111] sdhci: Secure Digital Host Controller Interface driver [ 3.163729] sdhci: Copyright(c) Pierre Ossman [ 3.168084] Synopsys Designware Multimedia Card Interface Driver [ 3.174011] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.179954] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.180745] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.193279] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.218139] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.227706] vdd-1v0: supplied by regulator-dummy [ 3.233276] vdd-1v8-hs: supplied by regulator-dummy [ 3.238147] vdd-1v8-ls: supplied by regulator-dummy [ 3.243061] vdd-1v8-ao: supplied by regulator-dummy [ 3.247103] vddio-ddr-1v1: supplied by regulator-dummy [ 3.251598] vdd-rtc: supplied by regulator-dummy [ 3.253425] spmic-ldo1: supplied by regulator-dummy [ 3.254674] vdd-ao-3v3: supplied by regulator-dummy [ 3.260925] vddio-emmc-3v3: supplied by regulator-dummy [ 3.267398] spmic-ldo4: supplied by regulator-dummy [ 3.268750] vdd-usb-3v3: supplied by regulator-dummy [ 3.275016] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.281268] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.287022] spmic-ldo8: supplied by vdd-1v8-ls [ 3.288601] gpio-510 (gpio_default): hogged as output/high [ 3.289952] gpio-511 (gpio_default): hogged as output/high [ 3.292950] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.428639] max77686-rtc max77620-rtc: registered as rtc0 [ 3.429749] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.430139] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.257066] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.258329] hid: raw HID events driver (C) Jiri Kosina [ 4.259174] usbcore: registered new interface driver usbhid [ 4.259328] usbhid: USB HID core driver [ 4.261589] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.262876] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.217490] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.291696] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 75.014 ms) ÿá[ 4.346965] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.347483] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.348370] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.349127] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.350616] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.351331] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.352016] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.353338] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.353591] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.356542] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.363313] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.370268] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.374692] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.380664] denver_knobs_init:MTS_VERSION:55637613 [ 4.393692] t19x_cache tegra-cache: probed [ 4.397173] optee: probing for conduit method. [ 4.398092] optee: revision 3.16 (65cc2218) [ 4.399400] optee: dynamic shared memory is enabled [ 4.402140] optee: initialized driver [ 4.409306] nvpmodel: initialized successfully [ 4.409860] tegra_hv: get_hvd: not initialized yet [ 4.414207] user_ivc_mempool: hypervisor not present [ 4.420786] usbcore: registered new interface driver snd-usb-audio [ 4.426922] u32 classifier [ 4.427991] input device check on [ 4.431583] Actions configured [ 4.435498] Initializing XFRM netlink socket [ 4.440390] NET: Registered protocol family 10 [ 4.447268] Segment Routing with IPv6 [ 4.447808] NET: Registered protocol family 17 [ 4.451869] NET: Registered protocol family 15 [ 4.456531] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.469758] Bluetooth: RFCOMM socket layer initialized [ 4.474500] Bluetooth: RFCOMM ver 1.11 [ 4.478600] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.484238] Bluetooth: HIDP socket layer initialized [ 4.490329] 9pnet: Installing 9P2000 support [ 4.493698] Key type dns_resolver registered [ 4.499350] registered taskstats version 1 [ 4.502114] Loading compiled-in X.509 certificates [ 4.514493] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.518010] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.528148] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.529987] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.538903] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.547241] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.663651] tegra194-pcie 14160000.pcie: Link up [ 4.666255] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.666496] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.666643] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.666878] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.667054] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.667418] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.667913] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.680744] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.681199] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.681610] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.683207] pci 0004:01:00.0: supports D1 D2 [ 4.683388] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.692291] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.692764] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.693000] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.693415] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.693714] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.693902] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.698546] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.705866] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.714125] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.724360] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.729218] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.734425] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.741203] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.750304] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.752094] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.760854] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.769254] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.884280] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.884869] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.885066] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.885243] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.885469] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.885711] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.886094] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.886505] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.902041] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.902451] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.904588] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.905923] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.907371] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.908943] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.909827] pci 0005:00:00.0: Removing from iommu group 7 [ 5.910122] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.943303] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.965071] host1x 13e10000.host1x: initialized [ 5.966713] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.967886] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.969157] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.969855] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.970896] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.971598] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.972621] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.973232] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.977866] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.984468] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.994184] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.001213] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.011486] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.018311] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.028062] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.035058] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.044965] falcon 15340000.vic: Adding to iommu group 17 [ 6.059282] falcon 15340000.vic: initialized [ 6.060301] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.065581] falcon 15380000.nvjpg: initialized [ 6.066263] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.077670] falcon 154c0000.nvenc: initialized [ 6.078299] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.088196] falcon 15a80000.nvenc1: initialized [ 6.088824] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.101314] nvdec 15480000.nvdec: initialized [ 6.101907] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.111637] nvdec 15140000.nvdec1: initialized [ 6.112147] tsec 15500000.tsec: Adding to iommu group 18 [ 6.117617] tsec 15500000.tsec: initialized [ 6.118249] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.125223] tsec 15100000.tsecb: initialized [ 6.129094] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.155733] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.167783] gpio-374 (wifi-enable): hogged as output/high [ 6.168124] gpio-431 (camera-control-output-low): hogged as output/low [ 6.168382] gpio-432 (camera-control-output-low): hogged as output/low [ 6.170046] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.171823] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.172380] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.176644] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.182034] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.187725] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.193210] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.201742] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.208843] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.220015] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.225453] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.231502] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.240398] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.249599] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.256856] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.264230] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.270429] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.280183] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.286383] pva 16000000.pva0: Adding to iommu group 22 [ 6.313272] pva 16000000.pva0: initialized [ 6.317393] pva 16800000.pva1: Adding to iommu group 23 [ 6.328140] pva 16800000.pva1: initialized [ 6.332009] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.345200] nvdla 15880000.nvdla0: initialized [ 6.346558] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.355216] nvdla 158c0000.nvdla1: initialized [ 6.358923] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.359265] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.359305] tegradc 15200000.display: Adding to iommu group 26 [ 6.359378] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.359408] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.359678] tegradccommon 15200000.display-hub: dma mapping done [ 6.360161] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.366745] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.366978] tegradc 15210000.display: Adding to iommu group 26 [ 6.370349] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.376809] generic_infoframe_type: 0x87 [ 6.382703] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.388272] tegradc 15200000.display: DT parsed successfully [ 6.392111] tegra_cec 3960000.tegra_cec: probed [ 6.397970] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.404638] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.422923] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.424219] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.430178] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.430182] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.445471] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.453897] kfuse 3830000.kfuse: initialized [ 6.459408] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.464364] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.476200] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.483120] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.483354] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.500453] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.509039] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.509806] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.521951] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.522394] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.530729] tegradc 15210000.display: disp0 connected to head1->sor [ 6.538728] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.544099] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.550099] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.556861] tegradc 15210000.display: DT parsed successfully [ 6.571144] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.577225] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.588653] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.594113] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.602369] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.611143] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.617705] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.625508] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.632378] usb usb1: Product: xHCI Host Controller [ 6.637349] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.643492] usb usb1: SerialNumber: 3610000.xhci [ 6.649358] hub 1-0:1.0: USB hub found [ 6.652512] hub 1-0:1.0: 4 ports detected [ 6.656750] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.661850] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.669171] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.676924] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.684983] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.692265] usb usb2: Product: xHCI Host Controller [ 6.696981] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.703160] usb usb2: SerialNumber: 3610000.xhci [ 6.708554] hub 2-0:1.0: USB hub found [ 6.711687] hub 2-0:1.0: 4 ports detected [ 6.754974] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.760535] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.761643] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.761818] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.775353] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.776395] tegra194-cpufreq ccplex: probed with BWMGR [ 6.777699] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.778416] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.778869] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.780108] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.786333] tegra194-vi5 15c10000.vi: initialized [ 6.787659] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.789483] mmc0: CQHCI version 5.10 [ 6.789555] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.789748] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.789753] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.789760] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.789764] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.789768] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.792100] generic_infoframe_type: 0x87 [ 6.795613] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.795620] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.795625] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.797101] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.801989] tegradc 15200000.display: DT parsed successfully [ 6.816532] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.825236] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.830189] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.836181] nvethernet 2490000.ethernet: Macsec not supported [ 6.840082] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.840086] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.840420] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.847607] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.853044] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.853235] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.861514] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.911593] mmc0: Command Queue Engine enabled [ 6.919186] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.919558] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.919933] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.919938] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.921864] tegradc 15200000.display: probed [ 6.925581] mmc0: periodic cache flush enabled [ 6.925599] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.933554] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.940000] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.951980] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.956214] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.962146] tegra-se-nvhost 15810000.se: initialized [ 6.978559] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.987190] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.049435] Console: switching to colour frame buffer device 240x67 [ 7.049613] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.055621] tegradc 15200000.display: fb registered [ 7.062412] tegra-se-nvhost 15820000.se: initialized [ 7.066705] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.073071] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.077908] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.083545] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.086886] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.086892] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.086896] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.086900] usb 1-2: Manufacturer: Generic [ 7.088859] hub 1-2:1.0: USB hub found [ 7.089062] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.096213] tegra-se-nvhost 15830000.se: initialized [ 7.105187] hub 1-2:1.0: 4 ports detected [ 7.112308] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.145645] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.151988] tegra-se-nvhost 15840000.se: initialized [ 7.154811] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.157774] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.166112] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.172693] tegra_actmon d230000.actmon: in actmon_register()... [ 7.178554] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.184926] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.192686] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.198300] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.204808] Extcon AUX1(HDMI) enable [ 7.208398] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.213382] hvc_sysfs: hypervisor is not present [ 7.216519] tegradc 15210000.display: disp1 connected to head1->sor [ 7.234920] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.235861] random: crng init done [ 7.242105] tegradc 15210000.display: DT parsed successfully [ 7.251366] tegradc 15210000.display: Display dc.00000000d427e60b registered with id=1 [ 7.253378] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.260374] ALSA device list: [ 7.260772] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.260779] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.267251] tegradc 15210000.display: probed [ 7.267532] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.267543] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.270922] No soundcards found. [ 7.277164] usb 2-3: Manufacturer: Generic [ 7.307112] tegradc 15210000.display: fb registered [ 7.310521] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.317801] hub 2-3:1.0: USB hub found [ 7.319595] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.325470] hub 2-3:1.0: 4 ports detected [ 7.331223] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.340375] tegradc 15210000.display: blank - powerdown [ 7.341261] Freeing unused kernel memory: 3968K [ 7.345705] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.350539] Run /init as init process [ 7.358266] Extcon DP: HPD disabled [ 7.365606] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.365618] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.371548] usb 1-3: new full-speed USB device number 3 using tegra-xusb ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.384951] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.385080] tegradc 15200000.display: blank - powerdown [ 7.399559] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.421928] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.421932] Extcon AUX1(HDMI) disable [ 7.445383] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.446214] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.458528] tegradc 15200000.display: unblank [ 7.459760] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.459956] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.464090] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.464095] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.465848] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.467696] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.471693] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.471696] Extcon AUX1(HDMI) enable [ 7.484445] tegradc 15200000.display: sync windows ret = 247 [ 7.515608] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.517165] Extcon HDMI: HPD enabled [ 7.518632] tegradc 15200000.display: hdmi: plugged [ 7.520802] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.522454] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.529619] usb 1-3: Product: Bluetooth Radio [ 7.534071] usb 1-3: Manufacturer: Realtek [ 7.538523] usb 1-3: SerialNumber: 00e04c000001 [ 7.566644] Root device found: mmcblk0p1 [ 7.570223] Found dev node: /dev/mmcblk0p1 [ 7.606385] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.611989] Rootfs mounted over mmcblk0p1 [ 7.641452] Switching from initrd to actual rootfs [ 7.793233] systemd[1]: System time before build time, advancing clock. [ 7.864040] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.869192] systemd[1]: Detected architecture arm64. [ 7.906044] systemd[1]: Set hostname to . [ 8.073693] systemd-sysv-generator[254]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.422356] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.424217] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.430217] systemd[1]: Created slice system-modprobe.slice. [ 8.435199] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.439728] systemd[1]: Created slice User and Session Slice. [ 8.443412] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.448002] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.451480] systemd[1]: Reached target User and Group Name Lookups. [ 8.454953] systemd[1]: Reached target Slices. [ 8.458179] systemd[1]: Reached target Swap. [ 8.462345] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.466126] systemd[1]: Listening on Syslog Socket. [ 8.469831] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.474861] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.480619] systemd[1]: Listening on Journal Audit Socket. [ 8.484345] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.488250] systemd[1]: Listening on Journal Socket. [ 8.492040] systemd[1]: Listening on udev Control Socket. [ 8.495712] systemd[1]: Listening on udev Kernel Socket. [ 8.504295] systemd[1]: Mounting Huge Pages File System... [ 8.512685] systemd[1]: Mounting POSIX Message Queue File System... [ 8.520816] systemd[1]: Mounting RPC Pipe File System... [ 8.529601] systemd[1]: Mounting Kernel Debug File System... [ 8.538284] systemd[1]: Mounting Kernel Trace File System... [ 8.548345] systemd[1]: Starting Journal Service... [ 8.557322] systemd[1]: Starting Set the console keyboard layout... [ 8.565730] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.569432] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.576056] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.585273] systemd[1]: Started Nameserver information manager. [ 8.589979] systemd[1]: Reached target Network (Pre). [ 8.598618] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.600588] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.606974] systemd[1]: Starting Load Kernel Modules... [ 8.615484] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.624131] systemd[1]: Starting udev Coldplug all Devices... [ 8.635803] systemd[1]: Mounted Huge Pages File System. [ 8.639639] systemd[1]: Mounted POSIX Message Queue File System. [ 8.643490] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.643653] systemd[1]: Mounted RPC Pipe File System. [ 8.646063] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.648722] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.648731] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.652122] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.652127] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.652367] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.657124] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.657311] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.657322] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.666237] systemd[1]: Mounted Kernel Debug File System. [ 8.670921] systemd[1]: Mounted Kernel Trace File System. [ 8.677462] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.682305] systemd[1]: nvfb-udev.service: Succeeded. [ 8.686576] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.696350] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.709082] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.710950] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.719329] systemd[1]: Starting Load/Save Random Seed... [ 8.727496] systemd[1]: Starting Create System Users... [ 8.747695] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.747695] [ 8.783911] systemd[1]: Finished Load/Save Random Seed. [ 8.792723] systemd[1]: Finished Load Kernel Modules. [ 8.797992] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.804928] systemd[1]: Mounting Kernel Configuration File System... [ 8.814457] systemd[1]: Started OP-TEE Client Supplicant. [ 8.823693] systemd[1]: Starting Apply Kernel Variables... [ 8.833931] systemd[1]: Finished Set the console keyboard layout. [ 8.838460] systemd[1]: Mounted Kernel Configuration File System. [ 8.850185] systemd[1]: Finished Create System Users. [ 10.180291] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.186918] imx219 9-0010: board setup failed [ 10.188423] imx219: probe of 9-0010 failed with error -121 [ 10.200738] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.207311] imx219 10-0010: board setup failed [ 10.208864] imx219: probe of 10-0010 failed with error -121 [ 10.351884] hot-surface-alert cooling state: 0 -> 1 [ 11.294482] using random self ethernet address [ 11.327903] using random host ethernet address [ 11.542852] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.542859] Creating 1 MTD partitions on "spi6.0": [ 11.542869] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.641795] using random self ethernet address [ 12.642921] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.156874] nvidia: loading out-of-tree module taints kernel. [ 58.989373] watchdog: watchdog0: watchdog did not stop! [ 59.429248] Trying to unregister non-registered hwtime source [ 62.486601] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.488154] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ûÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.342] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.359] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized cvc initialized ÿä:20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh64ÿâcvc_late initialized regulator_post initialized ÿä ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuration miÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäght be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.490] I> register 'maxim' power off handle [0003.495] I> virtual i2c enabled [0003.495] I> registered 'maxim,max20024' pmic [0003.495] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.496] I> Boot-device: QSPI [0003.496] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.629] I> edid read success [0003.642] I> edid read success [0003.642] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1280, height = 768, frequency = 79500000 [0003.643] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.653] I> width = 1280, height = 720, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1920, height = 1080, frequency = 148351648 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.681] I> width = 720, height = 576, frequency = 26973026 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 4096, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.727] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.741] initializing target [0003.742] calling apps_init() [0003.742] starting app kernel_boot_app [0003.743] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000673] Console: colour dummy device 80x25 [ 0.002078] printk: console [tty0] enabled [ 0.002149] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002185] pid_max: default: 32768 minimum: 301 [ 0.002431] LSM: Security Framework initializing [ 0.002488] Yama: becoming mindful. [ 0.002529] SELinux: Initializing. [ 0.002673] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002710] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005814] rcu: Hierarchical SRCU implementation. [ 0.006087] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006945] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007010] DTB Build time: Aug 10 2022 20:31:49 [ 0.010032] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010305] Remapping and enabling EFI services. [ 0.012614] smp: Bringing up secondary CPUs ... [ 0.041818] Detected PIPT I-cache on CPU1 [ 0.041914] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071440] Detected PIPT I-cache on CPU2 [ 0.071587] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101263] Detected PIPT I-cache on CPU3 [ 0.101352] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131199] Detected PIPT I-cache on CPU4 [ 0.131366] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161264] Detected PIPT I-cache on CPU5 [ 0.161350] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161704] smp: Brought up 1 node, 6 CPUs [ 0.161888] SMP: Total of 6 processors activated. [ 0.161956] CPU features: detected: Privileged Access Never [ 0.161976] CPU features: detected: LSE atomic instructions [ 0.161988] CPU features: detected: User Access Override [ 0.162001] CPU features: detected: 32-bit EL0 Support [ 0.162012] CPU features: detected: RAS Extension Support [ 0.162023] CPU features: detected: CRC32 instructions [ 0.162035] CPU features: detected: 32-bit EL1 Support [ 0.232459] CPU: All CPU(s) started at EL2 [ 0.239163] devtmpfs: initialized [ 0.287180] Registered cp15_barrier emulation handler [ 0.287320] Registered setend emulation handler [ 0.287346] KASLR enabled [ 0.287639] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287668] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288946] pinctrl core: initialized pinctrl subsystem [ 0.290128] SMBIOS 3.0.0 present. [ 0.290164] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.290791] NET: Registered protocol family 16 [ 0.292840] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293336] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294026] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294084] audit: initializing netlink subsys (disabled) [ 0.294347] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.294790] thermal_sys: Registered thermal governor 'step_wise' [ 0.294800] thermal_sys: Registered thermal governor 'power_allocator' [ 0.294815] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298249] cpuidle: using governor menu [ 0.298604] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299039] ASID allocator initialised with 32768 entries [ 0.299278] Serial: AMBA PL011 UART driver [ 0.302715] Tegra reboot handler registered. [ 0.376773] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.376903] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.377073] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.377120] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.377278] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.377326] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.377438] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.377488] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.377610] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.377664] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.380035] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.380079] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.380127] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.380159] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.380210] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.380254] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.380296] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.380330] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.380358] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.380386] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.380412] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.380439] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.380465] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.380492] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.380518] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.380544] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.380571] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.380695] mc-err: mcerr ops are set to t19x [ 0.392728] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392750] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.392765] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392777] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.399952] ACPI: Interpreter disabled. [ 0.401430] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.402775] iommu: Default domain type: Translated [ 0.402847] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.403254] SCSI subsystem initialized [ 0.403401] usbcore: registered new interface driver usbfs [ 0.403441] usbcore: registered new interface driver hub [ 0.403472] usbcore: registered new device driver usb [ 0.403930] mc: Linux media interface: v0.10 [ 0.403962] videodev: Linux video capture interface: v2.00 [ 0.404303] pps_core: LinuxPPS API ver. 1 registered [ 0.404314] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.404334] PTP clock support registered [ 0.404587] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.404905] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.404995] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.405698] Registered efivars operations [ 0.411843] FPGA manager framework [ 0.411949] Advanced Linux Sound Architecture Driver Initialized. [ 0.412539] Bluetooth: Core ver 2.22 [ 0.412585] NET: Registered protocol family 31 [ 0.412596] Bluetooth: HCI device and connection manager initialized [ 0.412621] Bluetooth: HCI socket layer initialized [ 0.412654] Bluetooth: L2CAP socket layer initialized [ 0.412677] Bluetooth: SCO socket layer initialized [ 0.414555] camchar: rtcpu character device driver loaded [ 0.415368] clocksource: Switched to clocksource arch_sys_counter [ 0.789279] VFS: Disk quotas dquot_6.6.0 [ 0.789345] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.789715] pnp: PnP ACPI: disabled [ 0.801650] la/ptsa driver initialized. [ 0.801768] NET: Registered protocol family 2 [ 0.801946] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.807242] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.807394] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.807661] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.808094] TCP: Hash tables configured (established 65536 bind 65536) [ 0.808200] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.808287] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.808511] NET: Registered protocol family 1 [ 0.809247] RPC: Registered named UNIX socket transport module. [ 0.809261] RPC: Registered udp transport module. [ 0.809271] RPC: Registered tcp transport module. [ 0.809280] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.809294] PCI: CLS 0 bytes, default 64 [ 0.809511] Trying to unpack rootfs image as initramfs... [ 0.995228] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.997338] Freeing initrd memory: 8196K [ 1.001906] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.001971] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.002009] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.002452] kvm [1]: IPA Size Limit: 40 bits [ 1.003042] kvm [1]: vgic interrupt IRQ9 [ 1.003662] kvm [1]: VHE mode initialized successfully [ 1.004812] Initialise system trusted keyrings [ 1.005068] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.008890] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.009564] NFS: Registering the id_resolver key type [ 1.009590] Key type id_resolver registered [ 1.009600] Key type id_legacy registered [ 1.009663] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.009682] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.009712] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.017195] NET: Registered protocol family 38 [ 1.017215] Key type asymmetric registered [ 1.017227] Asymmetric key parser 'x509' registered [ 1.017266] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.017420] io scheduler mq-deadline registered [ 1.017432] io scheduler kyber registered [ 1.023793] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.026736] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.026843] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.026919] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.027001] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.027076] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.032279] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.032294] scrncapt: init (heads:4 wins:6 planes:4) [ 1.033490] EINJ: ACPI disabled. [ 1.036655] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.036687] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.036705] tegra-pmc: ### PMC reset level: L1 [ 1.036722] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.036776] tegra-pmc: PMC Prod config success [ 1.041977] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.053770] random: fast init done [ 1.059008] printk: console [ttyTCU0] enabled [ 2.599451] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.603685] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.608296] arm-smmu 10000000.iommu: stage 1 translation [ 2.614027] arm-smmu 10000000.iommu: stage 2 translation [ 2.619513] arm-smmu 10000000.iommu: nested translation [ 2.624591] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.631768] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.642640] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.645153] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.651450] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.659176] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.664749] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.669472] arm-smmu 12000000.iommu: stage 1 translation [ 2.674726] arm-smmu 12000000.iommu: stage 2 translation [ 2.680409] arm-smmu 12000000.iommu: nested translation [ 2.685576] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.692758] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.703134] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.706134] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.712439] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.720049] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.729924] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.732887] tegra_profiler: auth: init [ 2.737187] THERMAL EST: found 3 subdevs [ 2.740794] THERMAL EST num_resources: 0 [ 2.744403] [THERMAL EST subdev 0] [ 2.747958] [THERMAL EST subdev 1] [ 2.751116] [THERMAL EST subdev 2] [ 2.754616] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.760834] THERMAL EST: thz register success. [ 2.765056] THERMAL EST: end of probe, return err: 0 [ 2.770647] nvsciipc: loaded module [ 2.777697] tun: Universal TUN/TAP device driver, 1.6 [ 2.780041] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.786370] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.791945] e1000e: Intel(R) PRO/1000 Network Driver [ 2.796613] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.802688] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.808243] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.814501] PPP generic driver version 2.4.2 [ 2.818415] PPP BSD Compression module registered [ 2.822973] PPP Deflate Compression module registered [ 2.828222] PPP MPPE Compression module registered [ 2.833483] usbcore: registered new interface driver r8152 [ 2.838730] usbcore: registered new interface driver asix [ 2.844319] usbcore: registered new interface driver ax88179_178a [ 2.850448] usbcore: registered new interface driver cdc_ether [ 2.856136] usbcore: registered new interface driver net1080 [ 2.861770] usbcore: registered new interface driver cdc_subset [ 2.867778] usbcore: registered new interface driver zaurus [ 2.873473] usbcore: registered new interface driver cdc_ncm [ 2.879149] usbcore: registered new interface driver aqc111 [ 2.885051] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.890864] ohci-pci: OHCI PCI platform driver [ 2.895422] ohci-platform: OHCI generic platform driver [ 2.901057] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.907794] usbcore: registered new interface driver uas [ 2.911734] usbcore: registered new interface driver usb-storage [ 2.917602] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.923934] mousedev: PS/2 mouse device common for all mice [ 2.928621] usbcore: registered new interface driver xpad [ 2.936615] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.939336] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.947432] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.953959] i2c /dev entries driver [ 2.957215] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.962997] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.968138] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.973551] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.978916] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.984633] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.990069] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.003781] device-mapper: uevent: version 1.0.3 [ 3.004297] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.010550] cpuidle: Initializing cpuidle driver [ 3.014166] sdhci: Secure Digital Host Controller Interface driver [ 3.018974] sdhci: Copyright(c) Pierre Ossman [ 3.023322] Synopsys Designware Multimedia Card Interface Driver [ 3.029278] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.035223] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.041175] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.048464] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.070841] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.080694] vdd-1v0: supplied by regulator-dummy [ 3.086246] vdd-1v8-hs: supplied by regulator-dummy [ 3.091425] vdd-1v8-ls: supplied by regulator-dummy [ 3.096332] vdd-1v8-ao: supplied by regulator-dummy [ 3.100308] vddio-ddr-1v1: supplied by regulator-dummy [ 3.104933] vdd-rtc: supplied by regulator-dummy [ 3.106716] spmic-ldo1: supplied by regulator-dummy [ 3.108047] vdd-ao-3v3: supplied by regulator-dummy [ 3.114266] vddio-emmc-3v3: supplied by regulator-dummy [ 3.120659] spmic-ldo4: supplied by regulator-dummy [ 3.121975] vdd-usb-3v3: supplied by regulator-dummy [ 3.128245] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.134578] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.140172] spmic-ldo8: supplied by vdd-1v8-ls [ 3.141686] gpio-510 (gpio_default): hogged as output/high [ 3.143064] gpio-511 (gpio_default): hogged as output/high [ 3.145945] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.281926] max77686-rtc max77620-rtc: registered as rtc0 [ 3.283286] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.283663] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.106675] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.108132] hid: raw HID events driver (C) Jiri Kosina [ 4.108968] usbcore: registered new interface driver usbhid [ 4.109127] usbhid: USB HID core driver [ 4.111126] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.112357] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.983155] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.057730] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.383 ms) ÿá[ 4.196548] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.197192] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.198266] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.199102] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.201080] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.201910] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.202530] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.203891] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.204217] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.206174] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.212916] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.219465] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.224243] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.230784] denver_knobs_init:MTS_VERSION:55637613 [ 4.243841] t19x_cache tegra-cache: probed [ 4.247888] optee: probing for conduit method. [ 4.248802] optee: revision 3.16 (65cc2218) [ 4.249738] optee: dynamic shared memory is enabled [ 4.251539] optee: initialized driver [ 4.258714] nvpmodel: initialized successfully [ 4.259307] tegra_hv: get_hvd: not initialized yet [ 4.264087] user_ivc_mempool: hypervisor not present [ 4.269724] usbcore: registered new interface driver snd-usb-audio [ 4.276290] u32 classifier [ 4.277737] input device check on [ 4.281452] Actions configured [ 4.284916] Initializing XFRM netlink socket [ 4.289715] NET: Registered protocol family 10 [ 4.296935] Segment Routing with IPv6 [ 4.297372] NET: Registered protocol family 17 [ 4.301444] NET: Registered protocol family 15 [ 4.306074] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.319669] Bluetooth: RFCOMM socket layer initialized [ 4.324054] Bluetooth: RFCOMM ver 1.11 [ 4.328258] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.333801] Bluetooth: HIDP socket layer initialized [ 4.340081] 9pnet: Installing 9P2000 support [ 4.343180] Key type dns_resolver registered [ 4.348743] registered taskstats version 1 [ 4.351924] Loading compiled-in X.509 certificates [ 4.364978] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.367487] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.377875] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.379616] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.388409] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.396544] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.511519] tegra194-pcie 14160000.pcie: Link up [ 4.514638] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.514935] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.515086] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.515486] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.515738] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.516264] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.516770] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.528663] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.529127] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.529593] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.531122] pci 0004:01:00.0: supports D1 D2 [ 4.531276] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.541760] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.542166] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.542433] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.542927] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.543229] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.543526] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.546283] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.553715] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.561981] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.572204] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.576928] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.582235] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.589122] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.598226] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.600190] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.608385] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.617103] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.732202] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.732707] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.732873] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.733073] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.733375] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.733683] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.734082] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.734506] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.754544] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.754937] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.756996] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.758432] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.760534] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.762162] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.763197] pci 0005:00:00.0: Removing from iommu group 7 [ 5.763778] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.802589] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.829834] host1x 13e10000.host1x: initialized [ 5.832074] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.833441] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.834778] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.835852] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.837115] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.837825] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.839185] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.840174] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.841722] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.842501] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.844332] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.849390] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.860142] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.866455] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.876921] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.883592] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.893004] falcon 15340000.vic: Adding to iommu group 17 [ 5.907880] falcon 15340000.vic: initialized [ 5.908734] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.914649] falcon 15380000.nvjpg: initialized [ 5.915241] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.925857] falcon 154c0000.nvenc: initialized [ 5.926408] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.937706] falcon 15a80000.nvenc1: initialized [ 5.938406] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.949871] nvdec 15480000.nvdec: initialized [ 5.950537] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.960458] nvdec 15140000.nvdec1: initialized [ 5.961121] tsec 15500000.tsec: Adding to iommu group 18 [ 5.966986] tsec 15500000.tsec: initialized [ 5.967600] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.973311] tsec 15100000.tsecb: initialized [ 5.977507] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.007754] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.020908] gpio-374 (wifi-enable): hogged as output/high [ 6.021227] gpio-431 (camera-control-output-low): hogged as output/low [ 6.021632] gpio-432 (camera-control-output-low): hogged as output/low [ 6.023228] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.025044] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.025626] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.027112] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.030112] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.035663] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.041341] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.050030] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.056727] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.068404] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.073344] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.079204] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.088332] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.097369] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.104831] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.112410] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.118418] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.128359] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.134335] pva 16000000.pva0: Adding to iommu group 22 [ 6.161500] pva 16000000.pva0: initialized [ 6.166779] pva 16800000.pva1: Adding to iommu group 23 [ 6.178041] pva 16800000.pva1: initialized [ 6.182626] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.197695] nvdla 15880000.nvdla0: initialized [ 6.199214] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.208859] nvdla 158c0000.nvdla1: initialized [ 6.212750] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.212875] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.213219] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.213771] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.214202] tegradccommon 15200000.display-hub: dma mapping done [ 6.214596] tegradc 15200000.display: Adding to iommu group 26 [ 6.214740] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.218962] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.222730] tegradc 15210000.display: Adding to iommu group 26 [ 6.223080] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.223444] generic_infoframe_type: 0x87 [ 6.223534] tegradc 15200000.display: DT parsed successfully [ 6.223621] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.224169] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.226915] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.226925] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.226928] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.227784] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.227801] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.228885] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.231584] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.236315] tegra_cec 3960000.tegra_cec: probed [ 6.237611] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.240901] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.255956] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.261994] tegradc 15210000.display: disp0 connected to head1->sor [ 6.268635] kfuse 3830000.kfuse: initialized [ 6.276520] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.285135] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.290613] tegradc 15210000.display: DT parsed successfully [ 6.296487] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.305826] random: crng init done [ 6.307546] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.314651] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.393479] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.402847] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.407318] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.416356] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.422357] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.442053] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.442444] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.445318] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.453951] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.462600] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.468877] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.476777] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.483892] usb usb1: Product: xHCI Host Controller [ 6.488650] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.494912] usb usb1: SerialNumber: 3610000.xhci [ 6.500404] hub 1-0:1.0: USB hub found [ 6.503489] hub 1-0:1.0: 4 ports detected [ 6.508132] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.512892] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.520778] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.528289] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.536049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.543350] usb usb2: Product: xHCI Host Controller [ 6.548536] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.554749] usb usb2: SerialNumber: 3610000.xhci [ 6.560123] hub 2-0:1.0: USB hub found [ 6.563229] hub 2-0:1.0: 4 ports detected [ 6.603666] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.609251] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.610672] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.610840] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.624256] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.625319] tegra194-cpufreq ccplex: probed with BWMGR [ 6.626515] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.626955] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.627435] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.628827] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.637590] mmc0: CQHCI version 5.10 [ 6.639430] tegra194-vi5 15c10000.vi: initialized [ 6.641648] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.642931] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.647104] generic_infoframe_type: 0x87 [ 6.653253] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.657273] tegradc 15200000.display: DT parsed successfully [ 6.665103] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.670629] tegradc 15200000.display: Display dc.000000001d141ab9 registered with id=0 [ 6.677159] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.677165] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.677169] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.692124] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.699293] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.704646] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.705071] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.705095] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.741265] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.742025] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.749485] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.764679] nvethernet 2490000.ethernet: Macsec not supported [ 6.770996] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.772003] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.776678] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.785760] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.791275] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.796677] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.814981] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.815145] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.822407] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.829257] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.835766] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.843772] tegra-se-nvhost 15810000.se: initialized [ 6.851746] tegradc 15200000.display: probed [ 6.859923] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.865800] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.872061] tegra-se-nvhost 15820000.se: initialized [ 6.878306] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.883039] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.889727] tegra-se-nvhost 15830000.se: initialized [ 6.895064] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.900332] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.907002] tegra-se-nvhost 15840000.se: initialized [ 6.912649] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.917512] Console: switching to colour frame buffer device 240x67 [ 6.918637] tegra_actmon d230000.actmon: in actmon_register()... [ 6.923664] tegradc 15200000.display: fb registered [ 6.923709] mmc0: Command Queue Engine enabled [ 6.923714] mmc0: periodic cache flush enabled [ 6.923728] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.924213] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.924418] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.928233] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.929438] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.934401] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.939010] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.944223] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.950128] hvc_sysfs: hypervisor is not present [ 6.954416] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.988776] ALSA device list: [ 6.990731] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.990740] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.990744] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.990748] usb 1-2: Manufacturer: Generic [ 6.992660] hub 1-2:1.0: USB hub found [ 6.993742] hub 1-2:1.0: 4 ports detected [ 7.040458] No soundcards found. [ 7.057829] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.059197] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.060589] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.069144] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.075547] Extcon AUX1(HDMI) enable [ 7.079329] tegradc 15210000.display: disp1 connected to head1->sor [ 7.085798] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.092606] tegradc 15210000.display: DT parsed successfully [ 7.098239] tegradc 15210000.display: Display dc.00000000e064ce03 registered with id=1 [ 7.106487] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.108373] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.112217] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.133193] tegradc 15210000.display: probed [ 7.133519] tegradc 15210000.display: fb registered [ 7.138679] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.141435] Freeing unused kernel memory: 3968K [ 7.142845] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.155092] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.156911] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.169170] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.169175] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.169179] usb 2-3: Manufacturer: Generic [ 7.169204] tegradc 15210000.display: blank - powerdown [ 7.171481] Run /init as init process [ 7.176358] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.180022] hub 2-3:1.0: USB hub found [ 7.182200] hub 2-3:1.0: 4 ports detected [ 7.184829] Extcon DP: HPD disabled [ 7.184834] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.184843] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.184848] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.233619] tegradc 15200000.display: blank - powerdown [ 7.235441] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.274892] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.274897] Extcon AUX1(HDMI) disable [ 7.279464] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.283241] Root device found: mmcblk0p1 [ 7.285279] Found dev node: /dev/mmcblk0p1 [ 7.298864] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.299704] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.299991] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.299996] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.312907] tegradc 15200000.display: unblank [ 7.313968] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.314158] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.320420] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.321752] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.322313] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.325824] Rootfs mounted over mmcblk0p1 [ 7.326369] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.326373] Extcon AUX1(HDMI) enable [ 7.339093] tegradc 15200000.display: sync windows ret = 247 [ 7.355169] Switching from initrd to actual rootfs [ 7.377080] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.384261] Extcon HDMI: HPD enabled [ 7.387675] tegradc 15200000.display: hdmi: plugged [ 7.428584] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.430207] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.431691] usb 1-3: Product: Bluetooth Radio [ 7.433092] usb 1-3: Manufacturer: Realtek [ 7.434506] usb 1-3: SerialNumber: 00e04c000001 [ 7.531642] systemd[1]: System time before build time, advancing clock. [ 7.601812] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.606862] systemd[1]: Detected architecture arm64. [ 7.654702] systemd[1]: Set hostname to . [ 7.819320] systemd-sysv-generator[243]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.169343] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.171061] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.176732] systemd[1]: Created slice system-modprobe.slice. [ 8.181300] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.185594] systemd[1]: Created slice User and Session Slice. [ 8.189097] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.193417] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.196822] systemd[1]: Reached target User and Group Name Lookups. [ 8.200134] systemd[1]: Reached target Slices. [ 8.203259] systemd[1]: Reached target Swap. [ 8.207339] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.212746] systemd[1]: Listening on Syslog Socket. [ 8.218275] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.224314] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.231167] systemd[1]: Listening on Journal Audit Socket. [ 8.237438] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.242167] systemd[1]: Listening on Journal Socket. [ 8.245936] systemd[1]: Listening on udev Control Socket. [ 8.249497] systemd[1]: Listening on udev Kernel Socket. [ 8.258099] systemd[1]: Mounting Huge Pages File System... [ 8.266378] systemd[1]: Mounting POSIX Message Queue File System... [ 8.274360] systemd[1]: Mounting RPC Pipe File System... [ 8.284072] systemd[1]: Mounting Kernel Debug File System... [ 8.293610] systemd[1]: Mounting Kernel Trace File System... [ 8.303621] systemd[1]: Starting Journal Service... [ 8.312676] systemd[1]: Starting Set the console keyboard layout... [ 8.321978] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.325577] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.331868] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.339902] systemd[1]: Started Nameserver information manager. [ 8.345007] systemd[1]: Reached target Network (Pre). [ 8.352467] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.354296] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.362470] systemd[1]: Starting Load Kernel Modules... [ 8.370249] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.379251] systemd[1]: Starting udev Coldplug all Devices... [ 8.389460] systemd[1]: Mounted Huge Pages File System. [ 8.393287] systemd[1]: Mounted POSIX Message Queue File System. [ 8.397024] systemd[1]: Mounted RPC Pipe File System. [ 8.400716] systemd[1]: Mounted Kernel Debug File System. [ 8.401095] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.406493] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.408855] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.409781] systemd[1]: Mounted Kernel Trace File System. [ 8.410442] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.410454] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.414953] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.415155] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.416789] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.420528] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.420537] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.427922] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.433152] systemd[1]: nvfb-udev.service: Succeeded. [ 8.437222] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.446891] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.452587] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.454435] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.462709] systemd[1]: Starting Load/Save Random Seed... [ 8.471228] systemd[1]: Starting Create System Users... [ 8.513522] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.513522] [ 8.519893] systemd[1]: Finished Load/Save Random Seed. [ 8.531455] systemd[1]: Finished Create System Users. [ 8.539974] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.553775] systemd[1]: Finished Load Kernel Modules. [ 8.558294] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.565254] systemd[1]: Mounting Kernel Configuration File System... [ 8.574263] systemd[1]: Started OP-TEE Client Supplicant. [ 8.582749] systemd[1]: Starting Apply Kernel Variables... [ 8.592698] systemd[1]: Finished Set the console keyboard layout. [ 8.599705] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.603942] systemd[1]: Mounted Kernel Configuration File System. [ 8.607705] systemd[1]: Reached target Local File Systems (Pre). [ 8.610892] systemd[1]: Reached target Local File Systems. [ 8.614251] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 9.981188] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.986535] imx219 9-0010: board setup failed [ 9.986636] imx219: probe of 9-0010 failed with error -121 [ 10.000403] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.016408] imx219 10-0010: board setup failed [ 10.016508] imx219: probe of 10-0010 failed with error -121 [ 10.159444] hot-surface-alert cooling state: 0 -> 1 [ 10.930253] using random self ethernet address [ 10.932476] using random host ethernet address [ 11.461001] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.461007] Creating 1 MTD partitions on "spi6.0": [ 11.461014] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.276198] using random self ethernet address [ 12.276204] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.837139] nvidia: loading out-of-tree module taints kernel. [ 59.469856] watchdog: watchdog0: watchdog did not stop! [ 59.945068] Trying to unregister non-registered hwtime source [ 63.002813] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.004522] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ôÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.482] I> register 'maxim' power off handle [0003.484] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.602] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.645] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.647] I> width = 720, height = 480, frequency = 26973026 [0003.651] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.719] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.745] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000806] Console: colour dummy device 80x25 [ 0.002377] printk: console [tty0] enabled [ 0.002440] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002480] pid_max: default: 32768 minimum: 301 [ 0.002655] LSM: Security Framework initializing [ 0.002734] Yama: becoming mindful. [ 0.002805] SELinux: Initializing. [ 0.002973] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003012] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006581] rcu: Hierarchical SRCU implementation. [ 0.006843] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007684] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007775] DTB Build time: Aug 10 2022 20:31:49 [ 0.010413] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010663] Remapping and enabling EFI services. [ 0.012690] smp: Bringing up secondary CPUs ... [ 0.042802] Detected PIPT I-cache on CPU1 [ 0.042862] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.072489] Detected PIPT I-cache on CPU2 [ 0.072566] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102146] Detected PIPT I-cache on CPU3 [ 0.102213] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131867] Detected PIPT I-cache on CPU4 [ 0.131945] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161538] Detected PIPT I-cache on CPU5 [ 0.161605] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161891] smp: Brought up 1 node, 6 CPUs [ 0.162268] SMP: Total of 6 processors activated. [ 0.162314] CPU features: detected: Privileged Access Never [ 0.162358] CPU features: detected: LSE atomic instructions [ 0.162379] CPU features: detected: User Access Override [ 0.162397] CPU features: detected: 32-bit EL0 Support [ 0.162415] CPU features: detected: RAS Extension Support [ 0.162432] CPU features: detected: CRC32 instructions [ 0.162449] CPU features: detected: 32-bit EL1 Support [ 0.231897] CPU: All CPU(s) started at EL2 [ 0.237388] devtmpfs: initialized [ 0.287974] Registered cp15_barrier emulation handler [ 0.288117] Registered setend emulation handler [ 0.288141] KASLR enabled [ 0.288372] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288412] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289524] pinctrl core: initialized pinctrl subsystem [ 0.290595] SMBIOS 3.0.0 present. [ 0.290628] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291383] NET: Registered protocol family 16 [ 0.293147] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293651] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294347] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294417] audit: initializing netlink subsys (disabled) [ 0.294704] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.295123] thermal_sys: Registered thermal governor 'step_wise' [ 0.295131] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295153] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.297243] cpuidle: using governor menu [ 0.297515] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.298139] ASID allocator initialised with 32768 entries [ 0.298408] Serial: AMBA PL011 UART driver [ 0.302129] Tegra reboot handler registered. [ 0.369763] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.369957] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.370193] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.370270] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.370437] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.370494] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.370627] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.370682] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.370826] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.370881] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.373422] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.373468] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.373513] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.373551] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.373591] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.373628] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.373678] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.373721] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.373755] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.373788] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.373821] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.373854] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.373887] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.373946] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.373993] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.374029] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.374079] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.374197] mc-err: mcerr ops are set to t19x [ 0.385196] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.385229] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.385248] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.385267] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.392752] ACPI: Interpreter disabled. [ 0.394107] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.395751] iommu: Default domain type: Translated [ 0.395836] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.396201] SCSI subsystem initialized [ 0.396372] usbcore: registered new interface driver usbfs [ 0.396417] usbcore: registered new interface driver hub [ 0.396475] usbcore: registered new device driver usb [ 0.397044] mc: Linux media interface: v0.10 [ 0.397076] videodev: Linux video capture interface: v2.00 [ 0.397430] pps_core: LinuxPPS API ver. 1 registered [ 0.397446] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.397473] PTP clock support registered [ 0.397766] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.398114] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.398216] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.398982] Registered efivars operations [ 0.405054] FPGA manager framework [ 0.405182] Advanced Linux Sound Architecture Driver Initialized. [ 0.405779] Bluetooth: Core ver 2.22 [ 0.405822] NET: Registered protocol family 31 [ 0.405860] Bluetooth: HCI device and connection manager initialized [ 0.405882] Bluetooth: HCI socket layer initialized [ 0.405899] Bluetooth: L2CAP socket layer initialized [ 0.405927] Bluetooth: SCO socket layer initialized [ 0.407571] camchar: rtcpu character device driver loaded [ 0.408369] clocksource: Switched to clocksource arch_sys_counter [ 0.824969] VFS: Disk quotas dquot_6.6.0 [ 0.825072] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.825475] pnp: PnP ACPI: disabled [ 0.839256] la/ptsa driver initialized. [ 0.839476] NET: Registered protocol family 2 [ 0.839691] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.847483] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.847618] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.848009] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.848695] TCP: Hash tables configured (established 65536 bind 65536) [ 0.848863] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.849045] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.849346] NET: Registered protocol family 1 [ 0.850038] RPC: Registered named UNIX socket transport module. [ 0.850103] RPC: Registered udp transport module. [ 0.850124] RPC: Registered tcp transport module. [ 0.850145] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.850175] PCI: CLS 0 bytes, default 64 [ 0.850512] Trying to unpack rootfs image as initramfs... [ 1.116706] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.119687] Freeing initrd memory: 8196K [ 1.124709] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.124755] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.124848] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.125213] kvm [1]: IPA Size Limit: 40 bits [ 1.125707] kvm [1]: vgic interrupt IRQ9 [ 1.126179] kvm [1]: VHE mode initialized successfully [ 1.127614] Initialise system trusted keyrings [ 1.127931] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.134142] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.135045] NFS: Registering the id_resolver key type [ 1.135089] Key type id_resolver registered [ 1.135109] Key type id_legacy registered [ 1.135236] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.135270] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.135323] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.145359] NET: Registered protocol family 38 [ 1.145389] Key type asymmetric registered [ 1.145409] Asymmetric key parser 'x509' registered [ 1.145506] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.145783] io scheduler mq-deadline registered [ 1.145808] io scheduler kyber registered [ 1.155242] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.161222] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.161327] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.161413] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.161499] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.161582] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.168131] scrncapt: init (heads:4 wins:6 planes:4) [ 1.168157] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.169487] EINJ: ACPI disabled. [ 1.173266] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.173302] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.173325] tegra-pmc: ### PMC reset level: L1 [ 1.173345] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.173438] tegra-pmc: PMC Prod config success [ 1.180048] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.188234] random: fast init done [ 1.188339] printk: console [ttyTCU0] enabled [ 2.741478] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.745465] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.750097] arm-smmu 10000000.iommu: stage 1 translation [ 2.755347] arm-smmu 10000000.iommu: stage 2 translation [ 2.761041] arm-smmu 10000000.iommu: nested translation [ 2.766119] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.773293] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.784030] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.786410] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.793228] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.800991] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.806266] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.810734] arm-smmu 12000000.iommu: stage 1 translation [ 2.816511] arm-smmu 12000000.iommu: stage 2 translation [ 2.821925] arm-smmu 12000000.iommu: nested translation [ 2.827095] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.834534] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.844690] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.847375] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.853962] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.861675] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.871051] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.874638] tegra_profiler: auth: init [ 2.878918] THERMAL EST: found 3 subdevs [ 2.882312] THERMAL EST num_resources: 0 [ 2.886157] [THERMAL EST subdev 0] [ 2.889222] [THERMAL EST subdev 1] [ 2.892891] [THERMAL EST subdev 2] [ 2.896145] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.902587] THERMAL EST: thz register success. [ 2.906580] THERMAL EST: end of probe, return err: 0 [ 2.912191] nvsciipc: loaded module [ 2.919449] tun: Universal TUN/TAP device driver, 1.6 [ 2.921882] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.927927] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.933206] e1000e: Intel(R) PRO/1000 Network Driver [ 2.938141] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.944498] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.949510] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.955657] PPP generic driver version 2.4.2 [ 2.960243] PPP BSD Compression module registered [ 2.964484] PPP Deflate Compression module registered [ 2.969989] PPP MPPE Compression module registered [ 2.974756] usbcore: registered new interface driver r8152 [ 2.980256] usbcore: registered new interface driver asix [ 2.985598] usbcore: registered new interface driver ax88179_178a [ 2.991713] usbcore: registered new interface driver cdc_ether [ 2.997684] usbcore: registered new interface driver net1080 [ 3.003548] usbcore: registered new interface driver cdc_subset [ 3.009582] usbcore: registered new interface driver zaurus [ 3.015267] usbcore: registered new interface driver cdc_ncm [ 3.020946] usbcore: registered new interface driver aqc111 [ 3.026613] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.032650] ohci-pci: OHCI PCI platform driver [ 3.036723] ohci-platform: OHCI generic platform driver [ 3.042593] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.049231] usbcore: registered new interface driver uas [ 3.053246] usbcore: registered new interface driver usb-storage [ 3.059442] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.065366] mousedev: PS/2 mouse device common for all mice [ 3.070154] usbcore: registered new interface driver xpad [ 3.078656] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.081150] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.088924] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.095492] i2c /dev entries driver [ 3.098819] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.104791] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.109873] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.115611] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.120871] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.126220] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.131623] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.143269] device-mapper: uevent: version 1.0.3 [ 3.143772] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.151614] cpuidle: Initializing cpuidle driver [ 3.156099] sdhci: Secure Digital Host Controller Interface driver [ 3.160494] sdhci: Copyright(c) Pierre Ossman [ 3.164583] Synopsys Designware Multimedia Card Interface Driver [ 3.171036] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.176697] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.182991] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.190276] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.209007] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.218187] vdd-1v0: supplied by regulator-dummy [ 3.223536] vdd-1v8-hs: supplied by regulator-dummy [ 3.228305] vdd-1v8-ls: supplied by regulator-dummy [ 3.232979] vdd-1v8-ao: supplied by regulator-dummy [ 3.236772] vddio-ddr-1v1: supplied by regulator-dummy [ 3.241039] vdd-rtc: supplied by regulator-dummy [ 3.242621] spmic-ldo1: supplied by regulator-dummy [ 3.243779] vdd-ao-3v3: supplied by regulator-dummy [ 3.249774] vddio-emmc-3v3: supplied by regulator-dummy [ 3.255898] spmic-ldo4: supplied by regulator-dummy [ 3.257033] vdd-usb-3v3: supplied by regulator-dummy [ 3.263048] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.269133] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.274542] spmic-ldo8: supplied by vdd-1v8-ls [ 3.275951] gpio-510 (gpio_default): hogged as output/high [ 3.277248] gpio-511 (gpio_default): hogged as output/high [ 3.283548] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.421936] max77686-rtc max77620-rtc: registered as rtc0 [ 3.422890] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.423200] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.131737] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.132758] hid: raw HID events driver (C) Jiri Kosina [ 4.133443] usbcore: registered new interface driver usbhid [ 4.133590] usbhid: USB HID core driver [ 4.135357] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.136571] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.909692] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.985099] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.216 ms) ÿá[ 4.221604] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.222088] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.222992] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.223672] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.225385] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.226053] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.226611] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.227932] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.228419] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.230409] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.237686] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.244118] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.249477] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.255983] denver_knobs_init:MTS_VERSION:55637613 [ 4.270072] t19x_cache tegra-cache: probed [ 4.273338] optee: probing for conduit method. [ 4.274264] optee: revision 3.16 (65cc2218) [ 4.275322] optee: dynamic shared memory is enabled [ 4.276840] optee: initialized driver [ 4.283341] nvpmodel: initialized successfully [ 4.284213] tegra_hv: get_hvd: not initialized yet [ 4.289055] user_ivc_mempool: hypervisor not present [ 4.295039] usbcore: registered new interface driver snd-usb-audio [ 4.301780] u32 classifier [ 4.302586] input device check on [ 4.306248] Actions configured [ 4.310250] Initializing XFRM netlink socket [ 4.315090] NET: Registered protocol family 10 [ 4.322298] Segment Routing with IPv6 [ 4.322620] NET: Registered protocol family 17 [ 4.326783] NET: Registered protocol family 15 [ 4.330887] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.344468] Bluetooth: RFCOMM socket layer initialized [ 4.349179] Bluetooth: RFCOMM ver 1.11 [ 4.353244] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.358840] Bluetooth: HIDP socket layer initialized [ 4.364930] 9pnet: Installing 9P2000 support [ 4.368544] Key type dns_resolver registered [ 4.373774] registered taskstats version 1 [ 4.377005] Loading compiled-in X.509 certificates [ 4.389655] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.392715] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.403203] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.404995] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.413231] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.421852] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.536368] tegra194-pcie 14160000.pcie: Link up [ 4.539280] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.539460] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.539587] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.539828] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.540134] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.540702] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.541153] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.555360] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.556122] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.556866] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.558434] pci 0004:01:00.0: supports D1 D2 [ 4.558731] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.572637] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.573006] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.573421] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.573919] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.574274] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.574432] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.574624] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.578499] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.586900] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.597923] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.602046] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.607470] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.614762] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.623923] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.625163] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.633286] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.642007] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.753039] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.753504] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.753700] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.753953] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.754184] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.754454] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.754895] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.755370] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.780017] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.780273] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.782321] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.783600] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.785126] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.786607] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.787680] pci 0005:00:00.0: Removing from iommu group 7 [ 5.787950] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.833866] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.858575] host1x 13e10000.host1x: initialized [ 5.860160] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.861086] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.862250] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.862940] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.864130] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.865203] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.866356] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.867084] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.868262] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.869188] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.870248] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.870954] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.880080] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.887114] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.897014] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.904160] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.914069] falcon 15340000.vic: Adding to iommu group 17 [ 5.929233] falcon 15340000.vic: initialized [ 5.930230] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.935785] falcon 15380000.nvjpg: initialized [ 5.936538] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.946788] falcon 154c0000.nvenc: initialized [ 5.947369] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.957491] falcon 15a80000.nvenc1: initialized [ 5.958185] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.970290] nvdec 15480000.nvdec: initialized [ 5.970955] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.981739] nvdec 15140000.nvdec1: initialized [ 5.982365] tsec 15500000.tsec: Adding to iommu group 18 [ 5.988782] tsec 15500000.tsec: initialized [ 5.989500] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.994963] tsec 15100000.tsecb: initialized [ 5.999009] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.027932] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.041328] gpio-374 (wifi-enable): hogged as output/high [ 6.041647] gpio-431 (camera-control-output-low): hogged as output/low [ 6.042012] gpio-432 (camera-control-output-low): hogged as output/low [ 6.043986] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.045869] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.046602] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.048139] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.050914] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.056639] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.061886] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.070555] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.078042] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.089708] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.094677] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.100178] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.108945] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.118693] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.126536] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.133219] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.139234] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.149418] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.155376] pva 16000000.pva0: Adding to iommu group 22 [ 6.184185] pva 16000000.pva0: initialized [ 6.189459] pva 16800000.pva1: Adding to iommu group 23 [ 6.201532] pva 16800000.pva1: initialized [ 6.206432] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.219428] nvdla 15880000.nvdla0: initialized [ 6.221408] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.230772] nvdla 158c0000.nvdla1: initialized [ 6.234826] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.235022] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.235263] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.235559] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.236182] tegradccommon 15200000.display-hub: dma mapping done [ 6.236473] tegradc 15200000.display: Adding to iommu group 26 [ 6.237900] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.239319] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.245182] tegradc 15210000.display: Adding to iommu group 26 [ 6.245224] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.245484] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.245851] generic_infoframe_type: 0x87 [ 6.245976] tegradc 15200000.display: DT parsed successfully [ 6.246057] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.250371] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.250381] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.250384] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.251171] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.256569] tegra_cec 3960000.tegra_cec: probed [ 6.262666] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.263820] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.268054] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.275706] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.290815] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.298441] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.306005] kfuse 3830000.kfuse: initialized [ 6.313367] tegradc 15210000.display: disp0 connected to head1->sor [ 6.316730] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.322196] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.332662] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.338603] tegradc 15210000.display: DT parsed successfully [ 6.346544] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.352323] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.369838] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.420074] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.425489] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.434759] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.439975] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.459860] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.460479] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.462656] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.471410] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.479830] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.486250] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.493923] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.501083] usb usb1: Product: xHCI Host Controller [ 6.506296] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.512594] usb usb1: SerialNumber: 3610000.xhci [ 6.518354] hub 1-0:1.0: USB hub found [ 6.520923] hub 1-0:1.0: 4 ports detected [ 6.525646] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.530291] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.538173] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.545872] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.553513] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.560742] usb usb2: Product: xHCI Host Controller [ 6.565968] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.572178] usb usb2: SerialNumber: 3610000.xhci [ 6.577701] hub 2-0:1.0: USB hub found [ 6.580655] hub 2-0:1.0: 4 ports detected [ 6.625418] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.633137] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.635149] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.635381] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.649465] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.650518] tegra194-cpufreq ccplex: probed with BWMGR [ 6.651942] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.652550] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.653018] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.654410] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.662602] tegra194-vi5 15c10000.vi: initialized [ 6.662949] mmc0: CQHCI version 5.10 [ 6.663951] tegradc 15210000.display: disp0 connected to head1->sor [ 6.664384] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.665274] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.671303] tegradc 15210000.display: DT parsed successfully [ 6.677811] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.683376] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.683493] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.691504] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.698899] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.704398] generic_infoframe_type: 0x87 [ 6.704439] tegradc 15200000.display: DT parsed successfully [ 6.704480] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.705439] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.705445] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.705451] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.705486] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.712347] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.719719] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.723637] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.729322] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.737715] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.739054] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.744535] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.757405] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.765284] nvethernet 2490000.ethernet: Macsec not supported [ 6.766657] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.771886] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.781191] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.788353] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.794458] random: crng init done [ 6.795117] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.795904] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.795910] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.795956] mmc0: Command Queue Engine enabled [ 6.795961] mmc0: periodic cache flush enabled [ 6.795975] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.796648] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.802005] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.803489] tegradc 15200000.display: probed [ 6.809583] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.827736] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.837451] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.937683] Console: switching to colour frame buffer device 240x67 [ 6.939215] tegra-se-nvhost 15810000.se: initialized [ 6.943626] tegradc 15200000.display: fb registered [ 6.953301] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.953637] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.960204] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.966187] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.971213] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.978353] tegra-se-nvhost 15820000.se: initialized [ 6.984082] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.990032] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.996748] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.003323] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.010196] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.010205] usb 1-2: Manufacturer: Generic [ 7.017316] tegra-se-nvhost 15830000.se: initialized [ 7.023281] hub 1-2:1.0: USB hub found [ 7.026575] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.031526] hub 1-2:1.0: 4 ports detected [ 7.034697] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.041676] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.045265] tegra-se-nvhost 15840000.se: initialized [ 7.051881] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.061031] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.064458] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.073587] tegra_actmon d230000.actmon: in actmon_register()... [ 7.078966] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.086186] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.091822] Extcon AUX1(HDMI) enable [ 7.091959] tegradc 15210000.display: disp1 connected to head1->sor [ 7.099344] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.104723] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.105179] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.108685] hvc_sysfs: hypervisor is not present [ 7.113973] tegradc 15210000.display: DT parsed successfully [ 7.146023] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.147482] tegradc 15210000.display: Display dc.000000004944220a registered with id=1 [ 7.148654] ALSA device list: [ 7.148661] No soundcards found. [ 7.155533] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.155538] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.155542] usb 2-3: Manufacturer: Generic [ 7.166010] hub 2-3:1.0: USB hub found [ 7.166875] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.172121] hub 2-3:1.0: 4 ports detected [ 7.177146] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.184070] tegradc 15210000.display: probed [ 7.211633] tegradc 15210000.display: fb registered [ 7.219799] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.223180] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.225187] Freeing unused kernel memory: 3968K [ 7.231148] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.241067] tegradc 15200000.display: blank - powerdown [ 7.252444] Run /init as init process [ 7.264353] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.275376] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.275381] Extcon AUX1(HDMI) disable [ 7.276380] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.298876] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.299772] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.310919] tegradc 15200000.display: unblank [ 7.311994] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.312187] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.318487] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.320545] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.324731] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.324734] Extcon AUX1(HDMI) enable [ 7.328911] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.328917] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.337311] tegradc 15200000.display: sync windows ret = 247 [ 7.369054] tegradc 15210000.display: blank - powerdown [ 7.370649] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.370653] Extcon DP: HPD disabled [ 7.370658] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.370669] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.370674] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.391706] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.398824] Extcon HDMI: HPD enabled [ 7.402150] tegradc 15200000.display: hdmi: plugged [ 7.425619] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.427319] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.428903] usb 1-3: Product: Bluetooth Radio [ 7.430348] usb 1-3: Manufacturer: Realtek [ 7.431731] usb 1-3: SerialNumber: 00e04c000001 [ 7.443232] Root device found: mmcblk0p1 [ 7.446660] Found dev node: /dev/mmcblk0p1 [ 7.482771] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.488365] Rootfs mounted over mmcblk0p1 [ 7.532248] Switching from initrd to actual rootfs [ 7.676378] systemd[1]: System time before build time, advancing clock. [ 7.747898] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.753081] systemd[1]: Detected architecture arm64. [ 7.793635] systemd[1]: Set hostname to . [ 7.962633] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.318445] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.320261] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.325996] systemd[1]: Created slice system-modprobe.slice. [ 8.330732] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.335018] systemd[1]: Created slice User and Session Slice. [ 8.338563] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.342761] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.346402] systemd[1]: Reached target User and Group Name Lookups. [ 8.349674] systemd[1]: Reached target Slices. [ 8.352792] systemd[1]: Reached target Swap. [ 8.356833] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.360497] systemd[1]: Listening on Syslog Socket. [ 8.364084] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.367568] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.371844] systemd[1]: Listening on Journal Audit Socket. [ 8.375564] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.379400] systemd[1]: Listening on Journal Socket. [ 8.383176] systemd[1]: Listening on udev Control Socket. [ 8.386988] systemd[1]: Listening on udev Kernel Socket. [ 8.397873] systemd[1]: Mounting Huge Pages File System... [ 8.406371] systemd[1]: Mounting POSIX Message Queue File System... [ 8.414573] systemd[1]: Mounting RPC Pipe File System... [ 8.423431] systemd[1]: Mounting Kernel Debug File System... [ 8.432021] systemd[1]: Mounting Kernel Trace File System... [ 8.442170] systemd[1]: Starting Journal Service... [ 8.451355] systemd[1]: Starting Set the console keyboard layout... [ 8.459726] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.463334] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.470106] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.478526] systemd[1]: Started Nameserver information manager. [ 8.483317] systemd[1]: Reached target Network (Pre). [ 8.491186] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.493210] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.501138] systemd[1]: Starting Load Kernel Modules... [ 8.509141] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.518054] systemd[1]: Starting udev Coldplug all Devices... [ 8.527914] systemd[1]: Mounted Huge Pages File System. [ 8.531868] systemd[1]: Mounted POSIX Message Queue File System. [ 8.535486] systemd[1]: Mounted RPC Pipe File System. [ 8.537508] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.543022] systemd[1]: Mounted Kernel Debug File System. [ 8.543226] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.547017] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.547023] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.547035] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.547039] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.547257] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.547470] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.547646] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.547658] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.562096] systemd[1]: Mounted Kernel Trace File System. [ 8.568317] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.573128] systemd[1]: nvfb-udev.service: Succeeded. [ 8.577380] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.590208] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.602735] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.605272] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.612959] systemd[1]: Starting Load/Save Random Seed... [ 8.620692] systemd[1]: Starting Create System Users... [ 8.636234] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.636234] [ 8.666348] systemd[1]: Finished Load Kernel Modules. [ 8.670669] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.678484] systemd[1]: Mounting Kernel Configuration File System... [ 8.686357] systemd[1]: Started OP-TEE Client Supplicant. [ 8.694937] systemd[1]: Starting Apply Kernel Variables... [ 8.705129] systemd[1]: Finished Load/Save Random Seed. [ 8.710574] systemd[1]: Mounted Kernel Configuration File System. [ 8.718171] systemd[1]: Finished Set the console keyboard layout. [ 8.731081] systemd[1]: Finished Create System Users. [ 10.116982] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.124009] imx219 9-0010: board setup failed [ 10.125301] imx219: probe of 9-0010 failed with error -121 [ 10.140561] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.148550] imx219 10-0010: board setup failed [ 10.149841] imx219: probe of 10-0010 failed with error -121 [ 10.246956] hot-surface-alert cooling state: 0 -> 1 [ 10.714730] using random self ethernet address [ 10.720046] using random host ethernet address [ 11.860080] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.861338] Creating 1 MTD partitions on "spi6.0": [ 11.863486] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.269536] using random self ethernet address [ 12.270660] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.866687] nvidia: loading out-of-tree module taints kernel. [ 59.126020] watchdog: watchdog0: watchdog did not stop! [ 59.609178] Trying to unregister non-registered hwtime source [ 62.666826] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.668594] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeouôÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized ÿä:ÿâpm_post initialized dbells initialized ÿä23:ÿâdmce initialized cvc initialized ÿä20 UTC 2022 aÿâavfs_clk_mach_post initialized ÿäarchÿâavfs_clk_platform_post initialized ÿä64 ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.209] I> CPU-BL Params @ 0xca020000 [0003.209] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.210] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.217] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.226] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.235] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.244] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.266] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.275] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.284] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.293] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.302] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.311] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.333] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.342] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.351] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.360] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.369] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.391] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.400] GIC-SPI Target CPU: 0 [0003.403] Interrupts Init done [0003.406] calling constructors [0003.409] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.433] initializing platform [0003.436] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.497] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.515] I> QSPI source rate = 204000 Khz [0003.518] I> Requested rate for QSPI clock = 34000 Khz [0003.523] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.528] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.534] I> QSPI Flash Size = 32 MB [0003.542] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.573] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.609] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.615] E> invalid display type [0003.616] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.644] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.646] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.679] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.690] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.713] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.730] I> hdmi_enable, starting HDMI initialisation [0003.735] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.744] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000802] Console: colour dummy device 80x25 [ 0.002335] printk: console [tty0] enabled [ 0.002427] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002491] pid_max: default: 32768 minimum: 301 [ 0.002664] LSM: Security Framework initializing [ 0.002722] Yama: becoming mindful. [ 0.002795] SELinux: Initializing. [ 0.002975] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003012] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006220] rcu: Hierarchical SRCU implementation. [ 0.006483] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007347] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007430] DTB Build time: Aug 10 2022 20:31:49 [ 0.010395] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010663] Remapping and enabling EFI services. [ 0.012710] smp: Bringing up secondary CPUs ... [ 0.043562] Detected PIPT I-cache on CPU1 [ 0.043636] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073533] Detected PIPT I-cache on CPU2 [ 0.073606] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103118] Detected PIPT I-cache on CPU3 [ 0.103277] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132952] Detected PIPT I-cache on CPU4 [ 0.133053] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162657] Detected PIPT I-cache on CPU5 [ 0.162726] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163056] smp: Brought up 1 node, 6 CPUs [ 0.163392] SMP: Total of 6 processors activated. [ 0.163439] CPU features: detected: Privileged Access Never [ 0.163470] CPU features: detected: LSE atomic instructions [ 0.163493] CPU features: detected: User Access Override [ 0.163517] CPU features: detected: 32-bit EL0 Support [ 0.163540] CPU features: detected: RAS Extension Support [ 0.163562] CPU features: detected: CRC32 instructions [ 0.163583] CPU features: detected: 32-bit EL1 Support [ 0.227358] CPU: All CPU(s) started at EL2 [ 0.232558] devtmpfs: initialized [ 0.286565] Registered cp15_barrier emulation handler [ 0.286706] Registered setend emulation handler [ 0.286730] KASLR enabled [ 0.286998] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287036] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288571] pinctrl core: initialized pinctrl subsystem [ 0.289559] SMBIOS 3.0.0 present. [ 0.289591] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.290361] NET: Registered protocol family 16 [ 0.292427] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292935] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293665] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.293783] audit: initializing netlink subsys (disabled) [ 0.294089] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.294508] thermal_sys: Registered thermal governor 'step_wise' [ 0.294515] thermal_sys: Registered thermal governor 'power_allocator' [ 0.294535] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.296589] cpuidle: using governor menu [ 0.296854] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297296] ASID allocator initialised with 32768 entries [ 0.297557] Serial: AMBA PL011 UART driver [ 0.300825] Tegra reboot handler registered. [ 0.367214] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.367355] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.367602] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.367659] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.367808] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.367860] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.367987] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.368048] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.368286] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.368450] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.371018] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.371080] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.371119] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.371154] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.371207] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.371241] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.371281] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.371324] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.371354] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.371385] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.371416] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.371445] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.371476] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.371505] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.371535] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.371565] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.371595] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.371711] mc-err: mcerr ops are set to t19x [ 0.383872] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.383903] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.383922] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.383939] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.392539] ACPI: Interpreter disabled. [ 0.394322] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.396254] iommu: Default domain type: Translated [ 0.396350] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.396883] SCSI subsystem initialized [ 0.397096] usbcore: registered new interface driver usbfs [ 0.397158] usbcore: registered new interface driver hub [ 0.397213] usbcore: registered new device driver usb [ 0.397859] mc: Linux media interface: v0.10 [ 0.397910] videodev: Linux video capture interface: v2.00 [ 0.398360] pps_core: LinuxPPS API ver. 1 registered [ 0.398390] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.398438] PTP clock support registered [ 0.398851] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.399400] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.399534] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.400543] Registered efivars operations [ 0.409035] FPGA manager framework [ 0.409187] Advanced Linux Sound Architecture Driver Initialized. [ 0.409993] Bluetooth: Core ver 2.22 [ 0.410054] NET: Registered protocol family 31 [ 0.410077] Bluetooth: HCI device and connection manager initialized [ 0.410108] Bluetooth: HCI socket layer initialized [ 0.410133] Bluetooth: L2CAP socket layer initialized [ 0.410169] Bluetooth: SCO socket layer initialized [ 0.412194] camchar: rtcpu character device driver loaded [ 0.413129] clocksource: Switched to clocksource arch_sys_counter [ 0.813006] VFS: Disk quotas dquot_6.6.0 [ 0.813126] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.813549] pnp: PnP ACPI: disabled [ 0.826843] la/ptsa driver initialized. [ 0.827016] NET: Registered protocol family 2 [ 0.827243] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.836329] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.836433] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.836813] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.837476] TCP: Hash tables configured (established 65536 bind 65536) [ 0.837643] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.837790] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.838100] NET: Registered protocol family 1 [ 0.839084] RPC: Registered named UNIX socket transport module. [ 0.839130] RPC: Registered udp transport module. [ 0.839180] RPC: Registered tcp transport module. [ 0.839202] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.839236] PCI: CLS 0 bytes, default 64 [ 0.839538] Trying to unpack rootfs image as initramfs... [ 1.104772] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.107839] Freeing initrd memory: 8196K [ 1.112157] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.112200] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.112246] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.112588] kvm [1]: IPA Size Limit: 40 bits [ 1.113161] kvm [1]: vgic interrupt IRQ9 [ 1.113701] kvm [1]: VHE mode initialized successfully [ 1.115069] Initialise system trusted keyrings [ 1.115374] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.121254] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.122043] NFS: Registering the id_resolver key type [ 1.122085] Key type id_resolver registered [ 1.122106] Key type id_legacy registered [ 1.122196] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.122228] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.122281] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.132410] NET: Registered protocol family 38 [ 1.132440] Key type asymmetric registered [ 1.132461] Asymmetric key parser 'x509' registered [ 1.132520] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.132778] io scheduler mq-deadline registered [ 1.132803] io scheduler kyber registered [ 1.138549] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.141585] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.141700] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.141817] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.141899] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.141978] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.147449] scrncapt: init (heads:4 wins:6 planes:4) [ 1.147564] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.148603] EINJ: ACPI disabled. [ 1.152214] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.152250] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.152272] tegra-pmc: ### PMC reset level: L1 [ 1.152291] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.152376] tegra-pmc: PMC Prod config success [ 1.157379] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.162674] random: fast init done [ 1.163344] printk: console [ttyTCU0] enabled [ 2.715259] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.719735] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.724054] arm-smmu 10000000.iommu: stage 1 translation [ 2.729906] arm-smmu 10000000.iommu: stage 2 translation [ 2.735040] arm-smmu 10000000.iommu: nested translation [ 2.740631] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.747567] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.757657] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.760652] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.767237] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.775048] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.780536] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.785259] arm-smmu 12000000.iommu: stage 1 translation [ 2.790769] arm-smmu 12000000.iommu: stage 2 translation [ 2.795941] arm-smmu 12000000.iommu: nested translation [ 2.801367] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.808800] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.818359] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.821923] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.828227] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.835887] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.845685] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.848649] tegra_profiler: auth: init [ 2.852918] THERMAL EST: found 3 subdevs [ 2.856328] THERMAL EST num_resources: 0 [ 2.860173] [THERMAL EST subdev 0] [ 2.863745] [THERMAL EST subdev 1] [ 2.866903] [THERMAL EST subdev 2] [ 2.870433] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.876634] THERMAL EST: thz register success. [ 2.881141] THERMAL EST: end of probe, return err: 0 [ 2.886286] nvsciipc: loaded module [ 2.893522] tun: Universal TUN/TAP device driver, 1.6 [ 2.895753] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.901910] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.907514] e1000e: Intel(R) PRO/1000 Network Driver [ 2.912413] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.918757] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.924035] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.930315] PPP generic driver version 2.4.2 [ 2.934221] PPP BSD Compression module registered [ 2.938762] PPP Deflate Compression module registered [ 2.944260] PPP MPPE Compression module registered [ 2.949278] usbcore: registered new interface driver r8152 [ 2.954794] usbcore: registered new interface driver asix [ 2.959852] usbcore: registered new interface driver ax88179_178a [ 2.965978] usbcore: registered new interface driver cdc_ether [ 2.972184] usbcore: registered new interface driver net1080 [ 2.977784] usbcore: registered new interface driver cdc_subset [ 2.983570] usbcore: registered new interface driver zaurus [ 2.989289] usbcore: registered new interface driver cdc_ncm [ 2.995239] usbcore: registered new interface driver aqc111 [ 3.000851] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.006919] ohci-pci: OHCI PCI platform driver [ 3.010980] ohci-platform: OHCI generic platform driver [ 3.017031] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.023382] usbcore: registered new interface driver uas [ 3.027254] usbcore: registered new interface driver usb-storage [ 3.033633] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.039574] mousedev: PS/2 mouse device common for all mice [ 3.044434] usbcore: registered new interface driver xpad [ 3.052652] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.055437] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.062930] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.069573] i2c /dev entries driver [ 3.073039] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.078555] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.083950] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.089368] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.094939] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.100429] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.105625] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.118916] device-mapper: uevent: version 1.0.3 [ 3.119382] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.126473] cpuidle: Initializing cpuidle driver [ 3.129991] sdhci: Secure Digital Host Controller Interface driver [ 3.135008] sdhci: Copyright(c) Pierre Ossman [ 3.139106] Synopsys Designware Multimedia Card Interface Driver [ 3.145072] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.151038] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.151874] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.164532] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.188812] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.198769] vdd-1v0: supplied by regulator-dummy [ 3.204325] vdd-1v8-hs: supplied by regulator-dummy [ 3.209197] vdd-1v8-ls: supplied by regulator-dummy [ 3.214024] vdd-1v8-ao: supplied by regulator-dummy [ 3.217994] vddio-ddr-1v1: supplied by regulator-dummy [ 3.222450] vdd-rtc: supplied by regulator-dummy [ 3.224276] spmic-ldo1: supplied by regulator-dummy [ 3.225498] vdd-ao-3v3: supplied by regulator-dummy [ 3.231674] vddio-emmc-3v3: supplied by regulator-dummy [ 3.238004] spmic-ldo4: supplied by regulator-dummy [ 3.239227] vdd-usb-3v3: supplied by regulator-dummy [ 3.245393] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.251665] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.257358] spmic-ldo8: supplied by vdd-1v8-ls [ 3.258989] gpio-510 (gpio_default): hogged as output/high [ 3.260377] gpio-511 (gpio_default): hogged as output/high [ 3.263250] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.399336] max77686-rtc max77620-rtc: registered as rtc0 [ 3.400731] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.401137] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.235388] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.236521] hid: raw HID events driver (C) Jiri Kosina [ 4.237379] usbcore: registered new interface driver usbhid [ 4.237520] usbhid: USB HID core driver [ 4.239580] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.240933] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.227375] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.301764] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.199 ms) ÿá[ 4.325405] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.325981] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.326883] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.327519] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.329315] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.329977] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.330483] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.331742] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.332003] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.335413] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.342287] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.348385] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.353398] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.359676] denver_knobs_init:MTS_VERSION:55637613 [ 4.372165] t19x_cache tegra-cache: probed [ 4.375333] optee: probing for conduit method. [ 4.376215] optee: revision 3.16 (65cc2218) [ 4.377317] optee: dynamic shared memory is enabled [ 4.380521] optee: initialized driver [ 4.388745] nvpmodel: initialized successfully [ 4.389487] tegra_hv: get_hvd: not initialized yet [ 4.392653] user_ivc_mempool: hypervisor not present [ 4.398432] usbcore: registered new interface driver snd-usb-audio [ 4.405331] u32 classifier [ 4.406199] input device check on [ 4.410048] Actions configured [ 4.413937] Initializing XFRM netlink socket [ 4.418691] NET: Registered protocol family 10 [ 4.425235] Segment Routing with IPv6 [ 4.426305] NET: Registered protocol family 17 [ 4.430472] NET: Registered protocol family 15 [ 4.434858] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.448230] Bluetooth: RFCOMM socket layer initialized [ 4.453028] Bluetooth: RFCOMM ver 1.11 [ 4.456656] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.462808] Bluetooth: HIDP socket layer initialized [ 4.468513] 9pnet: Installing 9P2000 support [ 4.472219] Key type dns_resolver registered [ 4.477439] registered taskstats version 1 [ 4.480646] Loading compiled-in X.509 certificates [ 4.492446] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.496277] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.506710] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.508570] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.516881] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.525532] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.641254] tegra194-pcie 14160000.pcie: Link up [ 4.644139] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.644374] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.644638] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.645253] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.645783] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.646234] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.647011] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.660632] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.661405] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.661954] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.663459] pci 0004:01:00.0: supports D1 D2 [ 4.663639] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.674804] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.675215] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.675550] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.676114] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.676467] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.676738] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.677068] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.683484] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.691724] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.702554] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.706959] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.712287] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.719713] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.728420] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.729671] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.738403] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.746610] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.862094] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.862541] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.862835] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.863118] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.863545] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.863796] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.864579] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.865069] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.886650] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.887159] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.889352] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.890620] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.892357] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.894287] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.895392] pci 0005:00:00.0: Removing from iommu group 7 [ 5.895743] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.944233] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.971470] host1x 13e10000.host1x: initialized [ 5.973496] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.974446] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.975704] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.976333] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.977692] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.978267] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.979288] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.979943] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.980896] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.981647] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.982657] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.983278] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.989069] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.996260] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.006498] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.013082] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.022842] falcon 15340000.vic: Adding to iommu group 17 [ 6.038205] falcon 15340000.vic: initialized [ 6.039447] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.044613] falcon 15380000.nvjpg: initialized [ 6.045318] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.055556] falcon 154c0000.nvenc: initialized [ 6.056180] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.067295] falcon 15a80000.nvenc1: initialized [ 6.067949] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.078531] nvdec 15480000.nvdec: initialized [ 6.079172] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.089056] nvdec 15140000.nvdec1: initialized [ 6.089653] tsec 15500000.tsec: Adding to iommu group 18 [ 6.095448] tsec 15500000.tsec: initialized [ 6.096023] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.103100] tsec 15100000.tsecb: initialized [ 6.107224] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.136571] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.149453] gpio-374 (wifi-enable): hogged as output/high [ 6.149789] gpio-431 (camera-control-output-low): hogged as output/low [ 6.150170] gpio-432 (camera-control-output-low): hogged as output/low [ 6.151774] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.153793] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.154276] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.155836] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.160020] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.165565] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.171256] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.179558] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.186888] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.198053] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.203488] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.209371] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.218227] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.227287] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.234619] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.242220] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.248284] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.258140] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.264452] pva 16000000.pva0: Adding to iommu group 22 [ 6.291324] pva 16000000.pva0: initialized [ 6.296586] pva 16800000.pva1: Adding to iommu group 23 [ 6.307803] pva 16800000.pva1: initialized [ 6.313007] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.327103] nvdla 15880000.nvdla0: initialized [ 6.328687] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.337449] nvdla 158c0000.nvdla1: initialized [ 6.340529] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.340891] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.341946] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.342082] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.342315] tegradc 15200000.display: Adding to iommu group 26 [ 6.342406] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.343273] tegradccommon 15200000.display-hub: dma mapping done [ 6.344118] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.350326] tegradc 15210000.display: Adding to iommu group 26 [ 6.354090] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.354429] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.354448] tegra_cec 3960000.tegra_cec: probed [ 6.355551] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.361791] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.366884] generic_infoframe_type: 0x87 [ 6.372490] kfuse 3830000.kfuse: initialized [ 6.377267] tegradc 15200000.display: DT parsed successfully [ 6.383018] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.388996] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.393046] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.393683] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.401429] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.417657] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.424203] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.424214] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.425513] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.431380] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.438046] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.463415] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.470842] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.476267] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.485196] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.506830] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.514683] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.533902] tegradc 15210000.display: disp0 connected to head1->sor [ 6.536496] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.537259] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.543535] tegradc 15210000.display: DT parsed successfully [ 6.553129] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.558445] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.564246] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.580608] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.589065] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.595642] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.602797] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.610134] usb usb1: Product: xHCI Host Controller [ 6.615400] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.621520] usb usb1: SerialNumber: 3610000.xhci [ 6.627383] hub 1-0:1.0: USB hub found [ 6.630200] hub 1-0:1.0: 4 ports detected [ 6.634658] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.639618] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.646975] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.654689] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.662887] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.670065] usb usb2: Product: xHCI Host Controller [ 6.674778] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.680987] usb usb2: SerialNumber: 3610000.xhci [ 6.686309] hub 2-0:1.0: USB hub found [ 6.689757] hub 2-0:1.0: 4 ports detected [ 6.716349] random: crng init done [ 6.734729] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.742338] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.745257] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.745599] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.759848] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.761022] tegra194-cpufreq ccplex: probed with BWMGR [ 6.762431] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.762933] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.763389] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.764857] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.771375] tegra194-vi5 15c10000.vi: initialized [ 6.772503] tegradc 15210000.display: disp0 connected to head1->sor [ 6.773465] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.774757] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.780426] tegradc 15210000.display: DT parsed successfully [ 6.786598] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.792136] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.792161] mmc0: CQHCI version 5.10 [ 6.800345] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.808324] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.811613] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.811619] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.811630] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.818049] generic_infoframe_type: 0x87 [ 6.829152] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.831490] tegradc 15200000.display: DT parsed successfully [ 6.837978] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.844674] tegradc 15200000.display: Display dc.00000000a849c9f5 registered with id=0 [ 6.848466] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.883658] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.883958] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.897548] nvethernet 2490000.ethernet: Macsec not supported [ 6.897552] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.897623] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.901128] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.904609] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.911131] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.920632] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.926799] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.934280] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.942361] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.947974] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.954206] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.962481] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.968396] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.975819] tegra-se-nvhost 15810000.se: initialized [ 6.985393] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.987477] tegradc 15200000.display: probed [ 6.996984] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.012035] mmc0: Command Queue Engine enabled [ 7.016698] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.022223] mmc0: periodic cache flush enabled [ 7.022248] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.027325] tegra-se-nvhost 15820000.se: initialized [ 7.033521] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.038958] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.043981] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.049340] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.064906] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.067645] tegra-se-nvhost 15830000.se: initialized [ 7.073067] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.082388] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.085778] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.085791] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.094438] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.100388] usb 1-2: Manufacturer: Generic [ 7.122715] tegra-se-nvhost 15840000.se: initialized [ 7.123012] Console: switching to colour frame buffer device 240x67 [ 7.124248] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.124759] hub 1-2:1.0: USB hub found [ 7.125882] hub 1-2:1.0: 4 ports detected [ 7.127410] tegradc 15200000.display: fb registered [ 7.127490] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.135086] tegra_actmon d230000.actmon: in actmon_register()... [ 7.140688] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.143918] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.148180] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.153085] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.189953] hvc_sysfs: hypervisor is not present [ 7.194980] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.212155] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.224048] ALSA device list: [ 7.224155] No soundcards found. [ 7.225181] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.225398] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.233443] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.239740] Extcon AUX1(HDMI) enable [ 7.243816] tegradc 15210000.display: disp1 connected to head1->sor [ 7.246957] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.250195] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.257952] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.257957] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.257966] usb 2-3: Manufacturer: Generic [ 7.265307] tegradc 15210000.display: DT parsed successfully [ 7.283654] hub 2-3:1.0: USB hub found [ 7.287327] tegradc 15210000.display: Display dc.00000000e8fe2be2 registered with id=1 [ 7.292982] hub 2-3:1.0: 4 ports detected [ 7.299315] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.309337] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.322396] tegradc 15210000.display: probed [ 7.322742] tegradc 15210000.display: fb registered [ 7.328414] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.332160] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.333693] Freeing unused kernel memory: 3968K [ 7.339865] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.350205] tegradc 15210000.display: blank - powerdown [ 7.355087] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.361151] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.361157] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.361163] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.361258] Run /init as init process [ 7.363310] Extcon DP: HPD disabled [ 7.389303] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.389334] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.389345] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.408872] tegradc 15200000.display: blank - powerdown [ 7.445871] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.445877] Extcon AUX1(HDMI) disable [ 7.463499] Root device found: mmcblk0p1 [ 7.465556] Found dev node: /dev/mmcblk0p1 [ 7.469447] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.470334] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.483386] tegradc 15200000.display: unblank [ 7.484481] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.484681] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.490987] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.492943] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.497005] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.497009] Extcon AUX1(HDMI) enable [ 7.502965] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.507045] Rootfs mounted over mmcblk0p1 [ 7.509690] tegradc 15200000.display: sync windows ret = 246 [ 7.522311] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.541451] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.541676] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.543046] Extcon HDMI: HPD enabled [ 7.543052] tegradc 15200000.display: hdmi: plugged [ 7.545869] Switching from initrd to actual rootfs [ 7.546058] usb 1-3: Product: Bluetooth Radio [ 7.558208] usb 1-3: Manufacturer: Realtek [ 7.562669] usb 1-3: SerialNumber: 00e04c000001 [ 7.717951] systemd[1]: System time before build time, advancing clock. [ 7.791148] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.796113] systemd[1]: Detected architecture arm64. [ 7.840435] systemd[1]: Set hostname to . [ 8.007831] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.366132] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.367854] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.373493] systemd[1]: Created slice system-modprobe.slice. [ 8.378314] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.382428] systemd[1]: Created slice User and Session Slice. [ 8.385785] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.389900] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.393327] systemd[1]: Reached target User and Group Name Lookups. [ 8.396397] systemd[1]: Reached target Slices. [ 8.399493] systemd[1]: Reached target Swap. [ 8.403402] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.406960] systemd[1]: Listening on Syslog Socket. [ 8.410527] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.413877] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.418001] systemd[1]: Listening on Journal Audit Socket. [ 8.421547] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.425216] systemd[1]: Listening on Journal Socket. [ 8.428819] systemd[1]: Listening on udev Control Socket. [ 8.432468] systemd[1]: Listening on udev Kernel Socket. [ 8.442951] systemd[1]: Mounting Huge Pages File System... [ 8.451377] systemd[1]: Mounting POSIX Message Queue File System... [ 8.459478] systemd[1]: Mounting RPC Pipe File System... [ 8.468145] systemd[1]: Mounting Kernel Debug File System... [ 8.476817] systemd[1]: Mounting Kernel Trace File System... [ 8.487064] systemd[1]: Starting Journal Service... [ 8.496363] systemd[1]: Starting Set the console keyboard layout... [ 8.504756] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.508371] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.515029] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.523265] systemd[1]: Started Nameserver information manager. [ 8.527973] systemd[1]: Reached target Network (Pre). [ 8.535208] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.537046] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.545427] systemd[1]: Starting Load Kernel Modules... [ 8.553604] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.562761] systemd[1]: Starting udev Coldplug all Devices... [ 8.572860] systemd[1]: Mounted Huge Pages File System. [ 8.578894] systemd[1]: Mounted POSIX Message Queue File System. [ 8.582749] systemd[1]: Mounted RPC Pipe File System. [ 8.588538] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.588562] systemd[1]: Mounted Kernel Debug File System. [ 8.590605] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.591029] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.594528] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.594547] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.594552] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.594730] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.594967] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.595120] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.595129] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.610225] systemd[1]: Mounted Kernel Trace File System. [ 8.616989] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.621837] systemd[1]: nvfb-udev.service: Succeeded. [ 8.626027] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.637301] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.650408] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.652187] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.660597] systemd[1]: Starting Load/Save Random Seed... [ 8.668727] systemd[1]: Starting Create System Users... [ 8.718009] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.718009] [ 8.725895] systemd[1]: Finished Create System Users. [ 8.732921] systemd[1]: Finished Load/Save Random Seed. [ 8.742484] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.749357] systemd[1]: Finished Load Kernel Modules. [ 8.757046] systemd[1]: Finished Set the console keyboard layout. [ 8.761894] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.768879] systemd[1]: Mounting Kernel Configuration File System... [ 8.778822] systemd[1]: Started OP-TEE Client Supplicant. [ 8.787692] systemd[1]: Starting Apply Kernel Variables... [ 8.797772] systemd[1]: Mounted Kernel Configuration File System. [ 8.814323] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.819431] systemd[1]: Reached target Local File Systems (Pre). [ 10.290068] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.297535] imx219 9-0010: board setup failed [ 10.298862] imx219: probe of 9-0010 failed with error -121 [ 10.337745] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.344166] imx219 10-0010: board setup failed [ 10.345560] imx219: probe of 10-0010 failed with error -121 [ 10.378304] hot-surface-alert cooling state: 0 -> 1 [ 10.546494] using random self ethernet address [ 10.549656] using random host ethernet address [ 12.023751] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.023757] Creating 1 MTD partitions on "spi6.0": [ 12.023767] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.399345] using random self ethernet address [ 12.400782] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.849606] nvidia: loading out-of-tree module taints kernel. [ 59.244034] watchdog: watchdog0: watchdog did not stop! [ 59.698742] Trying to unregister non-registered hwtime source [ 62.756223] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.757916] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] tÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 68000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.310] I> sdmmc DDR50 mode [0001.328] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.345] W> Cannot find any partition table for 00000003 [0001.346] > PARTITION_MANAGER: Failed to publish partition. [0001.361] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.363] I> Active Boot chain : 0 [0002.034] I> Relocating BR-BCT [0002.035] > DEVICE_PROD: device prod is not initialized. [0002.340] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.341] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.342] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.342] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.343] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.343] I> dram_block larger than 80000000 [0002.345] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.357] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.360] I> found decompressor handler: lz4 [0002.589] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized pm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.210] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.211] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.211] I> 2) Base:0xc9800000 Size:0x00200000 [0003.212] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.219] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.228] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.250] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.259] I> 14) Base:0x40048000 Size:0x00002000 [0003.263] I> 15) Base:0xaf000000 Size:0x00004000 [0003.268] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.277] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.286] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.308] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.317] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.321] I> 28) Base:0xc8400000 Size:0x00200000 [0003.326] I> 29) Base:0xc8800000 Size:0x00400000 [0003.330] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.335] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.344] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.375] I> 40) Base:0x00000000 Size:0x00000000 [0003.379] I> 41) Base:0x00000000 Size:0x00000000 [0003.384] I> 42) Base:0x00000000 Size:0x00000000 [0003.388] I> 43) Base:0x00000000 Size:0x00000000 [0003.393] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.402] GIC-SPI Target CPU: 0 [0003.405] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.417] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.427] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.435] initializing platform [0003.438] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.447] I> Bl_dtb @0xadf00000 [0003.450] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.473] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.499] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.525] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.544] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.557] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.566] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> regulator 'vdd-hdmi-5v0' already enabled [0003.605] I> hdmi cable connected [0003.613] W> set volts not configured for 'vdd-1v0' [0003.619] W> set volts not configured for 'vdd-1v8-hs' [0003.619] I> retrieved tmds range from prod_list_hdmi_soc [0003.625] E> invalid display type [0003.626] E> cannot find any other nvdisp nodes [0003.643] I> edid read success [0003.655] I> edid read success [0003.656] I> width = 640, height = 480, frequency = 25174825 [0003.656] I> width = 1920, height = 1080, frequency = 148500000 [0003.657] I> width = 1280, height = 768, frequency = 79500000 [0003.657] I> width = 1360, height = 768, frequency = 85500000 [0003.657] I> width = 720, height = 480, frequency = 26973026 [0003.661] I> width = 720, height = 576, frequency = 26973026 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1280, height = 720, frequency = 74175824 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 1920, height = 1080, frequency = 148351648 [0003.690] I> width = 720, height = 480, frequency = 26973026 [0003.695] I> width = 720, height = 576, frequency = 26973026 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 3840, height = 2160, frequency = 296703296 [0003.724] I> width = 4096, height = 2160, frequency = 296703296 [0003.729] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.741] I> hdmi_enable, starting HDMI initialisation [0003.746] I> hdmi_enable, HDMI initialisation complete [0003.755] initializing target [0003.756] calling apps_init() [0003.756] starting app kernel_boot_app [0003.757] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932988K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475328K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000714] Console: colour dummy device 80x25 [ 0.002209] printk: console [tty0] enabled [ 0.002285] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002328] pid_max: default: 32768 minimum: 301 [ 0.002501] LSM: Security Framework initializing [ 0.002573] Yama: becoming mindful. [ 0.002631] SELinux: Initializing. [ 0.002795] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002831] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006327] rcu: Hierarchical SRCU implementation. [ 0.006577] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007301] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007338] DTB Build time: Aug 10 2022 20:31:49 [ 0.010073] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010309] Remapping and enabling EFI services. [ 0.013144] smp: Bringing up secondary CPUs ... [ 0.046626] Detected PIPT I-cache on CPU1 [ 0.046703] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.076227] Detected PIPT I-cache on CPU2 [ 0.076371] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105991] Detected PIPT I-cache on CPU3 [ 0.106127] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135915] Detected PIPT I-cache on CPU4 [ 0.136012] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165841] Detected PIPT I-cache on CPU5 [ 0.166018] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166376] smp: Brought up 1 node, 6 CPUs [ 0.166616] SMP: Total of 6 processors activated. [ 0.166682] CPU features: detected: Privileged Access Never [ 0.166705] CPU features: detected: LSE atomic instructions [ 0.166720] CPU features: detected: User Access Override [ 0.166733] CPU features: detected: 32-bit EL0 Support [ 0.166747] CPU features: detected: RAS Extension Support [ 0.166759] CPU features: detected: CRC32 instructions [ 0.166773] CPU features: detected: 32-bit EL1 Support [ 0.234465] CPU: All CPU(s) started at EL2 [ 0.240954] devtmpfs: initialized [ 0.296414] Registered cp15_barrier emulation handler [ 0.296552] Registered setend emulation handler [ 0.296573] KASLR enabled [ 0.296874] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.296898] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.298262] pinctrl core: initialized pinctrl subsystem [ 0.299249] SMBIOS 3.0.0 present. [ 0.299293] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.299913] NET: Registered protocol family 16 [ 0.302041] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.302547] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.303238] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.303299] audit: initializing netlink subsys (disabled) [ 0.303536] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.304009] thermal_sys: Registered thermal governor 'step_wise' [ 0.304015] thermal_sys: Registered thermal governor 'power_allocator' [ 0.304029] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.306217] cpuidle: using governor menu [ 0.306752] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.307175] ASID allocator initialised with 32768 entries [ 0.307421] Serial: AMBA PL011 UART driver [ 0.311012] Tegra reboot handler registered. [ 0.383815] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.383924] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.384111] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.384154] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.384301] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.384359] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.384498] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.384541] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.384668] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.384707] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.386951] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.386985] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.387011] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.387037] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.387064] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.387090] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.387127] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.387157] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.387180] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.387203] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.387225] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.387263] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.387287] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.387323] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.387347] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.387388] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.387411] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.387505] mc-err: mcerr ops are set to t19x [ 0.400886] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.400910] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.400923] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.400934] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.407673] ACPI: Interpreter disabled. [ 0.409074] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.410378] iommu: Default domain type: Translated [ 0.410444] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.410920] SCSI subsystem initialized [ 0.411085] usbcore: registered new interface driver usbfs [ 0.411128] usbcore: registered new interface driver hub [ 0.411164] usbcore: registered new device driver usb [ 0.411557] mc: Linux media interface: v0.10 [ 0.411586] videodev: Linux video capture interface: v2.00 [ 0.411933] pps_core: LinuxPPS API ver. 1 registered [ 0.411946] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.411966] PTP clock support registered [ 0.412178] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.412552] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.412638] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.413281] Registered efivars operations [ 0.418070] FPGA manager framework [ 0.418188] Advanced Linux Sound Architecture Driver Initialized. [ 0.418814] Bluetooth: Core ver 2.22 [ 0.418853] NET: Registered protocol family 31 [ 0.418865] Bluetooth: HCI device and connection manager initialized [ 0.418897] Bluetooth: HCI socket layer initialized [ 0.418916] Bluetooth: L2CAP socket layer initialized [ 0.418938] Bluetooth: SCO socket layer initialized [ 0.421158] camchar: rtcpu character device driver loaded [ 0.422171] clocksource: Switched to clocksource arch_sys_counter [ 0.836288] VFS: Disk quotas dquot_6.6.0 [ 0.836375] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.836803] pnp: PnP ACPI: disabled [ 0.851192] la/ptsa driver initialized. [ 0.851344] NET: Registered protocol family 2 [ 0.851563] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.859430] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.859608] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.859983] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.860615] TCP: Hash tables configured (established 65536 bind 65536) [ 0.860825] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.860957] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.861293] NET: Registered protocol family 1 [ 0.862237] RPC: Registered named UNIX socket transport module. [ 0.862261] RPC: Registered udp transport module. [ 0.862279] RPC: Registered tcp transport module. [ 0.862326] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.862368] PCI: CLS 0 bytes, default 64 [ 0.862639] Trying to unpack rootfs image as initramfs... [ 1.124651] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.127502] Freeing initrd memory: 8196K [ 1.131622] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.131655] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.131722] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.132052] kvm [1]: IPA Size Limit: 40 bits [ 1.132513] kvm [1]: vgic interrupt IRQ9 [ 1.133012] kvm [1]: VHE mode initialized successfully [ 1.134689] Initialise system trusted keyrings [ 1.135055] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.143526] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.144613] NFS: Registering the id_resolver key type [ 1.144651] Key type id_resolver registered [ 1.144664] Key type id_legacy registered [ 1.144756] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.144779] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.144816] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.154670] NET: Registered protocol family 38 [ 1.154695] Key type asymmetric registered [ 1.154711] Asymmetric key parser 'x509' registered [ 1.154758] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.155026] io scheduler mq-deadline registered [ 1.155044] io scheduler kyber registered [ 1.160610] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.163437] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.163517] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.163596] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.163665] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.163757] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.169077] scrncapt: init (heads:4 wins:6 planes:4) [ 1.169159] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.170221] EINJ: ACPI disabled. [ 1.173631] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.173654] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.173668] tegra-pmc: ### PMC reset level: L1 [ 1.173681] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.173728] tegra-pmc: PMC Prod config success [ 1.179516] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.184641] random: fast init done [ 1.185512] printk: console [ttyTCU0] enabled [ 2.736874] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.741485] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.746050] arm-smmu 10000000.iommu: stage 1 translation [ 2.751887] arm-smmu 10000000.iommu: stage 2 translation [ 2.757014] arm-smmu 10000000.iommu: nested translation [ 2.762612] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.769787] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.779908] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.782910] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.789212] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.796953] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.802517] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.807262] arm-smmu 12000000.iommu: stage 1 translation [ 2.812744] arm-smmu 12000000.iommu: stage 2 translation [ 2.817920] arm-smmu 12000000.iommu: nested translation [ 2.823395] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.830528] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.840636] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.843638] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.850454] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.857916] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.867740] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.870601] tegra_profiler: auth: init [ 2.875117] THERMAL EST: found 3 subdevs [ 2.878294] THERMAL EST num_resources: 0 [ 2.882396] [THERMAL EST subdev 0] [ 2.885436] [THERMAL EST subdev 1] [ 2.889123] [THERMAL EST subdev 2] [ 2.892109] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.898588] THERMAL EST: thz register success. [ 2.902809] THERMAL EST: end of probe, return err: 0 [ 2.908374] nvsciipc: loaded module [ 2.915512] tun: Universal TUN/TAP device driver, 1.6 [ 2.917729] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.924135] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.929422] e1000e: Intel(R) PRO/1000 Network Driver [ 2.934377] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.940700] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.945743] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.951970] PPP generic driver version 2.4.2 [ 2.956187] PPP BSD Compression module registered [ 2.960983] PPP Deflate Compression module registered [ 2.966225] PPP MPPE Compression module registered [ 2.970983] usbcore: registered new interface driver r8152 [ 2.976743] usbcore: registered new interface driver asix [ 2.982076] usbcore: registered new interface driver ax88179_178a [ 2.988211] usbcore: registered new interface driver cdc_ether [ 2.993902] usbcore: registered new interface driver net1080 [ 2.999751] usbcore: registered new interface driver cdc_subset [ 3.005558] usbcore: registered new interface driver zaurus [ 3.011237] usbcore: registered new interface driver cdc_ncm [ 3.016912] usbcore: registered new interface driver aqc111 [ 3.022848] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.028617] ohci-pci: OHCI PCI platform driver [ 3.033186] ohci-platform: OHCI generic platform driver [ 3.039022] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.045346] usbcore: registered new interface driver uas [ 3.049486] usbcore: registered new interface driver usb-storage [ 3.055373] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.061570] mousedev: PS/2 mouse device common for all mice [ 3.066629] usbcore: registered new interface driver xpad [ 3.074347] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.077127] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.084906] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.091744] i2c /dev entries driver [ 3.095061] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.100798] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.106152] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.111516] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.116884] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.122442] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.127787] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.141122] device-mapper: uevent: version 1.0.3 [ 3.141552] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.148301] cpuidle: Initializing cpuidle driver [ 3.152173] sdhci: Secure Digital Host Controller Interface driver [ 3.156971] sdhci: Copyright(c) Pierre Ossman [ 3.160831] Synopsys Designware Multimedia Card Interface Driver [ 3.167299] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.173237] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.174062] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.186190] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.207582] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.217068] vdd-1v0: supplied by regulator-dummy [ 3.222583] vdd-1v8-hs: supplied by regulator-dummy [ 3.227474] vdd-1v8-ls: supplied by regulator-dummy [ 3.232327] vdd-1v8-ao: supplied by regulator-dummy [ 3.236198] vddio-ddr-1v1: supplied by regulator-dummy [ 3.240625] vdd-rtc: supplied by regulator-dummy [ 3.242412] spmic-ldo1: supplied by regulator-dummy [ 3.243629] vdd-ao-3v3: supplied by regulator-dummy [ 3.249792] vddio-emmc-3v3: supplied by regulator-dummy [ 3.256065] spmic-ldo4: supplied by regulator-dummy [ 3.257289] vdd-usb-3v3: supplied by regulator-dummy [ 3.263459] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.269604] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.275165] spmic-ldo8: supplied by vdd-1v8-ls [ 3.276617] gpio-510 (gpio_default): hogged as output/high [ 3.278076] gpio-511 (gpio_default): hogged as output/high [ 3.281183] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.419065] max77686-rtc max77620-rtc: registered as rtc0 [ 3.420103] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.420472] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.235418] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.236531] hid: raw HID events driver (C) Jiri Kosina [ 4.237291] usbcore: registered new interface driver usbhid [ 4.237444] usbhid: USB HID core driver [ 4.239590] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.240952] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.305231] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.379611] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.189 ms) ÿá[ 4.325348] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.325846] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.326912] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.327659] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.329340] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.329937] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.330523] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.331675] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.331930] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.334470] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.342070] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.348492] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.353353] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.360182] denver_knobs_init:MTS_VERSION:55637613 [ 4.371745] t19x_cache tegra-cache: probed [ 4.375004] optee: probing for conduit method. [ 4.375870] optee: revision 3.16 (65cc2218) [ 4.377065] optee: dynamic shared memory is enabled [ 4.380326] optee: initialized driver [ 4.387844] nvpmodel: initialized successfully [ 4.388468] tegra_hv: get_hvd: not initialized yet [ 4.392808] user_ivc_mempool: hypervisor not present [ 4.398914] usbcore: registered new interface driver snd-usb-audio [ 4.404928] u32 classifier [ 4.406451] input device check on [ 4.410208] Actions configured [ 4.413727] Initializing XFRM netlink socket [ 4.418719] NET: Registered protocol family 10 [ 4.424956] Segment Routing with IPv6 [ 4.426091] NET: Registered protocol family 17 [ 4.430115] NET: Registered protocol family 15 [ 4.434781] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.448197] Bluetooth: RFCOMM socket layer initialized [ 4.452794] Bluetooth: RFCOMM ver 1.11 [ 4.456953] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.462558] Bluetooth: HIDP socket layer initialized [ 4.468560] 9pnet: Installing 9P2000 support [ 4.472278] Key type dns_resolver registered [ 4.477275] registered taskstats version 1 [ 4.480450] Loading compiled-in X.509 certificates [ 4.493634] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.496462] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.506690] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.508621] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.516935] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.525549] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.642244] tegra194-pcie 14160000.pcie: Link up [ 4.645171] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.645462] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.645604] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.645916] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.646205] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.646669] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.647210] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.660709] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.661160] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.661588] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.663266] pci 0004:01:00.0: supports D1 D2 [ 4.663481] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.676016] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.676471] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.676812] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.677416] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.677781] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.678058] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.678612] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.684424] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.692712] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.703139] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.707435] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.713366] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.720003] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.729320] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.730691] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.739357] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.747571] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.854840] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.855741] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.855948] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.856103] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.856349] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.856619] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.857041] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.857590] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.873138] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.873580] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.875539] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.876910] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.878573] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.880107] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.881170] pci 0005:00:00.0: Removing from iommu group 7 [ 5.881488] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.913760] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.936776] host1x 13e10000.host1x: initialized [ 5.938513] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.939411] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.940461] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.941074] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.942067] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.942792] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.943810] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.944510] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.948206] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.954847] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.964743] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.972138] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.982038] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.989121] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.998827] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.006032] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.015914] falcon 15340000.vic: Adding to iommu group 17 [ 6.031042] falcon 15340000.vic: initialized [ 6.032042] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.037783] falcon 15380000.nvjpg: initialized [ 6.038430] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.048000] falcon 154c0000.nvenc: initialized [ 6.048643] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.058871] falcon 15a80000.nvenc1: initialized [ 6.059537] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.071194] nvdec 15480000.nvdec: initialized [ 6.071880] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.081670] nvdec 15140000.nvdec1: initialized [ 6.082387] tsec 15500000.tsec: Adding to iommu group 18 [ 6.088183] tsec 15500000.tsec: initialized [ 6.088760] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.096192] tsec 15100000.tsecb: initialized [ 6.100199] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.124802] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.136797] gpio-374 (wifi-enable): hogged as output/high [ 6.137122] gpio-431 (camera-control-output-low): hogged as output/low [ 6.137412] gpio-432 (camera-control-output-low): hogged as output/low [ 6.139132] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.140837] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.141412] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.147029] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.152472] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.158095] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.163494] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.171895] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.179574] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.190921] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.196328] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.202231] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.211071] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.220011] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.227209] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.235124] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.241313] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.250721] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.256873] pva 16000000.pva0: Adding to iommu group 22 [ 6.283403] pva 16000000.pva0: initialized [ 6.288036] pva 16800000.pva1: Adding to iommu group 23 [ 6.299019] pva 16800000.pva1: initialized [ 6.303402] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.322409] nvdla 15880000.nvdla0: initialized [ 6.323756] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.332918] nvdla 158c0000.nvdla1: initialized [ 6.335251] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.335570] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.335878] tegradccommon 15200000.display-hub: dma mapping done [ 6.337739] tegradc 15200000.display: Adding to iommu group 26 [ 6.344974] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.345293] generic_infoframe_type: 0x87 [ 6.345532] tegradc 15200000.display: DT parsed successfully [ 6.345815] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.348009] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.349241] tegradc 15210000.display: Adding to iommu group 26 [ 6.353396] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.356560] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.371066] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.376437] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.376550] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.384767] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.384777] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.390360] tegra_cec 3960000.tegra_cec: probed [ 6.411748] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.412059] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.417482] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.429852] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.431330] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.446954] kfuse 3830000.kfuse: initialized [ 6.451756] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.452146] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.457337] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.457977] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.477454] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.478008] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.485695] tegradc 15210000.display: disp0 connected to head1->sor [ 6.494371] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.499182] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.505910] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.512423] tegradc 15210000.display: DT parsed successfully [ 6.522318] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.526715] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.533166] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.560323] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.560711] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.563963] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.572605] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.581090] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.587880] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.595465] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.602754] usb usb1: Product: xHCI Host Controller [ 6.607370] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.613649] usb usb1: SerialNumber: 3610000.xhci [ 6.619271] hub 1-0:1.0: USB hub found [ 6.622540] hub 1-0:1.0: 4 ports detected [ 6.627133] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.631690] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.639493] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.647344] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.654846] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.662390] usb usb2: Product: xHCI Host Controller [ 6.667029] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.673274] usb usb2: SerialNumber: 3610000.xhci [ 6.678886] hub 2-0:1.0: USB hub found [ 6.681976] hub 2-0:1.0: 4 ports detected [ 6.720433] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.725632] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.727055] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.727247] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.740077] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.741130] tegra194-cpufreq ccplex: probed with BWMGR [ 6.742410] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.743118] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.743604] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.744818] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.757433] mmc0: CQHCI version 5.10 [ 6.759445] tegra194-vi5 15c10000.vi: initialized [ 6.760620] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.765586] generic_infoframe_type: 0x87 [ 6.769712] tegradc 15200000.display: DT parsed successfully [ 6.771810] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.775193] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.781756] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.786868] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.789995] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.797332] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.805179] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.805185] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.805582] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.813416] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.820226] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.820487] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.828587] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.837637] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.842725] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.850244] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.855475] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.865814] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.865820] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.914226] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.921209] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.931218] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.932991] ************************************** [ 6.932994] CPU:0, Error:cbb-noc [ 6.933002] Error Logger : 0 [ 6.941139] ErrLog0 : 0x80030000 [ 6.941142] Transaction Type : RD - Read, Incrementing [ 6.941145] Error Code : SLV [ 6.941148] Error Source : Target [ 6.941151] Error Description : Target error detected by CBB slave [ 6.941160] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.944555] nvethernet 2490000.ethernet: Macsec not supported [ 6.947963] Packet header Lock : 0 [ 6.947966] Packet header Len1 : 3 [ 6.947971] NOC protocol version : version >= 2.7 [ 6.947973] ErrLog1 : 0x352422 [ 6.947976] ErrLog2 : 0x0 [ 6.947978] RouteId : 0x352422 [ 6.947981] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.947984] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.947986] TargSubRange : 18 [ 6.947988] SeqId : 0 [ 6.947991] ErrLog3 : 0x4045c [ 6.947993] ErrLog4 : 0x0 [ 6.948023] Address accessed : 0x15b4045c [ 7.028191] ErrLog5 : 0x889f851 [ 7.031603] Non-Modify : 0x1 [ 7.034671] AXI ID : 0x11 [ 7.038079] Master ID : CCPLEX [ 7.041491] Security Group(GRPSEC): 0x7e [ 7.045434] Cache : 0x1 -- Bufferable [ 7.049635] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.056459] FALCONSEC : 0x0 [ 7.059884] Virtual Queuing Channel(VQC): 0x0 [ 7.064249] ************************************** [ 7.069524] ------------[ cut here ]------------ [ 7.073787] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.080607] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.085598] Modules linked in: [ 7.088834] CPU: 0 PID: 103 Comm: kworker/u12:2 Not tainted 5.10.104-tegra #1 [ 7.096003] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.108012] Workqueue: events_unbound async_run_entry_fn [ 7.113510] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.119550] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.124532] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.129002] sp : ffff800010003b30 [ 7.132585] x29: ffff800010003b30 x28: 0000000000000001 [ 7.138007] x27: 0000000000000005 x26: ffffc5477b063f58 [ 7.143173] x25: ffffc5477b9bce10 x24: 0000000000000001 [ 7.148766] x23: ffffc5477b357000 x22: ffffc5477b7dea00 [ 7.154022] x21: 000000000000000f x20: ffff428040e65680 [ 7.159447] x19: ffffc5477b7dea00 x18: 0000000000000010 [ 7.165042] x17: ffffc5477b10d008 x16: 000000004a9eebfa [ 7.170298] x15: ffff42804196bf70 x14: 0720072007200720 [ 7.176066] x13: 0720072007200720 x12: 0720072007200720 [ 7.181404] x11: 0720072007200720 x10: 0720072007200720 [ 7.186660] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.192172] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.197960] x5 : 0000000000057fa8 x4 : ffffc5477b667968 [ 7.203110] x3 : 00000000ffffffff x2 : ffffc54779afe090 [ 7.208703] x1 : ffff42804196ba00 x0 : 0000000100010100 [ 7.213785] Call trace: [ 7.216238] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.220784] __handle_irq_event_percpu+0x68/0x2a0 [ 7.225331] handle_irq_event_percpu+0x40/0xa0 [ 7.229809] handle_irq_event+0x50/0xf0 [ 7.233300] handle_fasteoi_irq+0xc0/0x170 [ 7.237325] generic_handle_irq+0x40/0x60 [ 7.241606] __handle_domain_irq+0x70/0xd0 [ 7.245809] efi_header_end+0xb0/0xf0 [ 7.249322] el1_irq+0xd0/0x180 [ 7.252022] __do_softirq+0xb4/0x3e8 [ 7.255958] irq_exit+0xc0/0xe0 [ 7.258947] __handle_domain_irq+0x74/0xd0 [ 7.262699] efi_header_end+0xb0/0xf0 [ 7.266631] el1_irq+0xd0/0x180 [ 7.269369] tegra_hda_get_dev_id+0x6c/0x2b0 [ 7.273636] tegra_hda_init+0x234/0x440 [ 7.277832] tegra_dc_hdmi_init+0x820/0xb50 [ 7.281424] tegra_dc_set_out+0x2cc/0x480 [ 7.285537] tegra_dc_probe+0xa90/0x1570 [ 7.289732] platform_drv_probe+0x5c/0xb0 [ 7.293676] really_probe+0xf8/0x3d0 [ 7.297349] driver_probe_device+0x60/0xc0 [ 7.301480] __device_attach_driver+0x8c/0xd0 [ 7.305837] bus_for_each_drv+0x8c/0xe0 [ 7.309875] __device_attach_async_helper+0xc4/0xf0 [ 7.314757] async_run_entry_fn+0x4c/0x150 [ 7.318701] process_one_work+0x1c4/0x4a0 [ 7.322829] worker_thread+0x54/0x430 [ 7.326485] kthread+0x148/0x170 [ 7.330068] ret_from_fork+0x10/0x24 [ 7.333764] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.339875] ---[ end trace 7062732dfd6b3e50 ]--- [ 7.344246] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.351959] SMP: stopping secondary CPUs [ 7.355893] Kernel Offset: 0x454769940000 from 0xffff800010000000 [ 7.362004] PHYS_OFFSET: 0xffffbd80c0000000 [ 7.365861] CPU features: 0x8240002,03802a30 [ 7.370491] Memory Limit: none [ 7.373559] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.355] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.029] > DEVICE_PROD: device prod is not initialized. [0002.334] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.335] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.336] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.336] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.337] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.337] I> dram_block larger than 80000000 [0002.340] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.351] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.354] I> found decompressor handler: lz4 [0002.583] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.584] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aÿâclk_dt_late initialized ÿäuÿânoc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 202ÿâavfs_clk_platform_post initialized ÿä2 aÿâcvc_late initialized regulator_post initialized ÿäarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.203] I> Welcome to NVDisp-Init [0003.203] I> NVDisp-Init version: t194-f9ecfedc [0003.204] I> CPU-BL Params @ 0xca020000 [0003.204] I> 0) Base:0x00000000 Size:0x00000000 [0003.204] I> 1) Base:0xc8300000 Size:0x00100000 [0003.205] I> 2) Base:0xc9800000 Size:0x00200000 [0003.205] I> 3) Base:0xc8600000 Size:0x00200000 [0003.207] I> 4) Base:0xc8200000 Size:0x00100000 [0003.212] I> 5) Base:0xc8100000 Size:0x00100000 [0003.216] I> 6) Base:0xc9400000 Size:0x00400000 [0003.221] I> 7) Base:0xc9000000 Size:0x00400000 [0003.225] I> 8) Base:0xc8000000 Size:0x00100000 [0003.230] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.234] I> 10) Base:0xca800000 Size:0x00800000 [0003.239] I> 11) Base:0x40000000 Size:0x00040000 [0003.243] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.248] I> 13) Base:0x40046000 Size:0x00002000 [0003.252] I> 14) Base:0x40048000 Size:0x00002000 [0003.257] I> 15) Base:0xaf000000 Size:0x00004000 [0003.261] I> 16) Base:0x4004a000 Size:0x00002000 [0003.265] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.270] I> 18) Base:0x4004c000 Size:0x00002000 [0003.274] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.279] I> 20) Base:0x4004e000 Size:0x00002000 [0003.283] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.288] I> 22) Base:0x00000000 Size:0x00000000 [0003.292] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.297] I> 24) Base:0xcc000000 Size:0x02000000 [0003.301] I> 25) Base:0x40050000 Size:0x00002000 [0003.306] I> 26) Base:0x40040000 Size:0x00006000 [0003.310] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.315] I> 28) Base:0xc8400000 Size:0x00200000 [0003.319] I> 29) Base:0xc8800000 Size:0x00400000 [0003.324] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.328] I> 31) Base:0x00000000 Size:0x00000000 [0003.332] I> 32) Base:0xf8000000 Size:0x08000000 [0003.337] I> 33) Base:0xce000000 Size:0x2a000000 [0003.341] I> 34) Base:0xcb000000 Size:0x01000000 [0003.346] I> 35) Base:0xae000000 Size:0x01000000 [0003.350] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.355] I> 37) Base:0xca000000 Size:0x00800000 [0003.359] I> 38) Base:0x80000000 Size:0x20000000 [0003.364] I> 39) Base:0xb0000000 Size:0x08000000 [0003.368] I> 40) Base:0x00000000 Size:0x00000000 [0003.373] I> 41) Base:0x00000000 Size:0x00000000 [0003.377] I> 42) Base:0x00000000 Size:0x00000000 [0003.382] I> 43) Base:0x00000000 Size:0x00000000 [0003.386] I> 44) Base:0x00000000 Size:0x00000000 [0003.390] I> 45) Base:0x00000000 Size:0x00000000 [0003.395] GIC-SPI Target CPU: 0 [0003.398] Interrupts Init done [0003.401] calling constructors [0003.404] initializing heap [0003.406] I> Heap: [0xa0960000 ... 0xadf00000] [0003.411] initializing threads [0003.413] initializing timers [0003.416] creating bootstrap completion thread [0003.421] top of bootstrap2() [0003.423] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.428] initializing platform [0003.431] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.436] W> device prod register failed [0003.440] I> Bl_dtb @0xadf00000 [0003.443] I> gpio framework initialized [0003.455] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.465] I> fixed regulator driver initialized [0003.481] I> register 'maxim' power off handle [0003.483] I> virtual i2c enabled [0003.483] I> registered 'maxim,max20024' pmic [0003.483] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.485] I> Boot-device: QSPI [0003.487] I> Boot_device: QSPI_FLASH instance: 0 [0003.492] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.502] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.510] I> QSPI source rate = 204000 Khz [0003.513] I> Requested rate for QSPI clock = 34000 Khz [0003.518] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.523] I> tx_clk_tap_delay : 0 [0003.526] I> rx_clk_tap_delay : 16 [0003.529] I> QSPI Flash Size = 32 MB [0003.537] I> Qspi initialized successfully [0003.537] I> qspi flash-0 params source = boot args [0003.541] W> No board IDs available [0003.544] E> Failed to get board id info! [0003.550] I> sdmmc-3 params source = safe params [0003.557] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.559] W> Cannot find any partition table for 00000003 [0003.563] E> Failed to publish 00000003 [0003.568] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.614] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.631] I> edid read success [0003.644] I> edid read success [0003.644] I> width = 640, height = 480, frequency = 25174825 [0003.644] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.655] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1920, height = 1080, frequency = 148351648 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.683] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.743] initializing target [0003.744] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000742] Console: colour dummy device 80x25 [ 0.002236] printk: console [tty0] enabled [ 0.002308] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002343] pid_max: default: 32768 minimum: 301 [ 0.002600] LSM: Security Framework initializing [ 0.002663] Yama: becoming mindful. [ 0.002705] SELinux: Initializing. [ 0.002892] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002930] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006158] rcu: Hierarchical SRCU implementation. [ 0.006448] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007290] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007351] DTB Build time: Aug 10 2022 20:31:49 [ 0.010856] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011274] Remapping and enabling EFI services. [ 0.013297] smp: Bringing up secondary CPUs ... [ 0.042728] Detected PIPT I-cache on CPU1 [ 0.042850] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074633] Detected PIPT I-cache on CPU2 [ 0.074783] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104427] Detected PIPT I-cache on CPU3 [ 0.104563] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134335] Detected PIPT I-cache on CPU4 [ 0.134444] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164094] Detected PIPT I-cache on CPU5 [ 0.164243] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164551] smp: Brought up 1 node, 6 CPUs [ 0.164879] SMP: Total of 6 processors activated. [ 0.164971] CPU features: detected: Privileged Access Never [ 0.165029] CPU features: detected: LSE atomic instructions [ 0.165053] CPU features: detected: User Access Override [ 0.165076] CPU features: detected: 32-bit EL0 Support [ 0.165097] CPU features: detected: RAS Extension Support [ 0.165119] CPU features: detected: CRC32 instructions [ 0.165141] CPU features: detected: 32-bit EL1 Support [ 0.233300] CPU: All CPU(s) started at EL2 [ 0.238187] devtmpfs: initialized [ 0.288475] Registered cp15_barrier emulation handler [ 0.288586] Registered setend emulation handler [ 0.288617] KASLR enabled [ 0.288890] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288931] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290272] pinctrl core: initialized pinctrl subsystem [ 0.291234] SMBIOS 3.0.0 present. [ 0.291274] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292591] NET: Registered protocol family 16 [ 0.294650] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295159] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295866] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295940] audit: initializing netlink subsys (disabled) [ 0.296162] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296607] thermal_sys: Registered thermal governor 'step_wise' [ 0.296613] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296637] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298864] cpuidle: using governor menu [ 0.299297] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299821] ASID allocator initialised with 32768 entries [ 0.300064] Serial: AMBA PL011 UART driver [ 0.304841] Tegra reboot handler registered. [ 0.379539] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.379668] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.379864] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.379924] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.380059] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.380114] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.380245] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.380299] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.380496] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.380555] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.383146] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.383193] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.383237] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.383277] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.383318] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.383356] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.383421] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.383466] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.383502] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.383537] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.383572] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.383607] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.383641] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.383676] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.383710] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.383747] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.383782] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.383879] mc-err: mcerr ops are set to t19x [ 0.397052] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.397088] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.397112] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.397135] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.404232] ACPI: Interpreter disabled. [ 0.405348] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.406600] iommu: Default domain type: Translated [ 0.406672] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.407089] SCSI subsystem initialized [ 0.407270] usbcore: registered new interface driver usbfs [ 0.407325] usbcore: registered new interface driver hub [ 0.407367] usbcore: registered new device driver usb [ 0.407763] mc: Linux media interface: v0.10 [ 0.407800] videodev: Linux video capture interface: v2.00 [ 0.408097] pps_core: LinuxPPS API ver. 1 registered [ 0.408126] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.408164] PTP clock support registered [ 0.408388] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.408693] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.408793] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.409364] Registered efivars operations [ 0.414998] FPGA manager framework [ 0.415110] Advanced Linux Sound Architecture Driver Initialized. [ 0.415688] Bluetooth: Core ver 2.22 [ 0.415733] NET: Registered protocol family 31 [ 0.415753] Bluetooth: HCI device and connection manager initialized [ 0.415779] Bluetooth: HCI socket layer initialized [ 0.415804] Bluetooth: L2CAP socket layer initialized [ 0.415834] Bluetooth: SCO socket layer initialized [ 0.417400] camchar: rtcpu character device driver loaded [ 0.418127] clocksource: Switched to clocksource arch_sys_counter [ 0.710279] VFS: Disk quotas dquot_6.6.0 [ 0.710364] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.710722] pnp: PnP ACPI: disabled [ 0.720413] la/ptsa driver initialized. [ 0.720537] NET: Registered protocol family 2 [ 0.720723] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.725321] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.725484] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.725739] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.726214] TCP: Hash tables configured (established 65536 bind 65536) [ 0.726352] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.726452] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.726652] NET: Registered protocol family 1 [ 0.727664] RPC: Registered named UNIX socket transport module. [ 0.727711] RPC: Registered udp transport module. [ 0.727740] RPC: Registered tcp transport module. [ 0.727768] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.727811] PCI: CLS 0 bytes, default 64 [ 0.728159] Trying to unpack rootfs image as initramfs... [ 0.926737] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.929001] Freeing initrd memory: 8196K [ 0.932893] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.932952] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.932995] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.933391] kvm [1]: IPA Size Limit: 40 bits [ 0.933961] kvm [1]: vgic interrupt IRQ9 [ 0.934565] kvm [1]: VHE mode initialized successfully [ 0.936161] Initialise system trusted keyrings [ 0.936503] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.943840] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.944729] NFS: Registering the id_resolver key type [ 0.944774] Key type id_resolver registered [ 0.944821] Key type id_legacy registered [ 0.944942] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.944997] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.945059] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.955325] NET: Registered protocol family 38 [ 0.955354] Key type asymmetric registered [ 0.955370] Asymmetric key parser 'x509' registered [ 0.955415] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.955750] io scheduler mq-deadline registered [ 0.955770] io scheduler kyber registered [ 0.962391] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.965867] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.965964] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.966052] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.966182] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.966282] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.972756] scrncapt: init (heads:4 wins:6 planes:4) [ 0.972835] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.974162] EINJ: ACPI disabled. [ 0.977487] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.977514] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 0.977555] tegra-pmc: ### PMC reset level: L1 [ 0.977569] tegra-pmc: ### PMC reset status reg: 0x9 [ 0.977682] tegra-pmc: PMC Prod config success [ 0.982862] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.991297] random: fast init done [ 1.000205] printk: console [ttyTCU0] enabled [ 2.540501] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.544665] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.549400] arm-smmu 10000000.iommu: stage 1 translation [ 2.554861] arm-smmu 10000000.iommu: stage 2 translation [ 2.560461] arm-smmu 10000000.iommu: nested translation [ 2.565797] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.572973] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.584860] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.586359] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.592922] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.600462] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.605703] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.610684] arm-smmu 12000000.iommu: stage 1 translation [ 2.615936] arm-smmu 12000000.iommu: stage 2 translation [ 2.621365] arm-smmu 12000000.iommu: nested translation [ 2.627051] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.634234] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.645644] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.647104] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.653912] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.661289] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.670728] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.674056] tegra_profiler: auth: init [ 2.678562] THERMAL EST: found 3 subdevs [ 2.681712] THERMAL EST num_resources: 0 [ 2.685850] [THERMAL EST subdev 0] [ 2.688911] [THERMAL EST subdev 1] [ 2.692576] [THERMAL EST subdev 2] [ 2.695822] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.702302] THERMAL EST: thz register success. [ 2.706520] THERMAL EST: end of probe, return err: 0 [ 2.711955] nvsciipc: loaded module [ 2.718866] tun: Universal TUN/TAP device driver, 1.6 [ 2.721131] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.727331] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.733145] e1000e: Intel(R) PRO/1000 Network Driver [ 2.737818] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.744172] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.749450] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.755711] PPP generic driver version 2.4.2 [ 2.759659] PPP BSD Compression module registered [ 2.764429] PPP Deflate Compression module registered [ 2.769680] PPP MPPE Compression module registered [ 2.774434] usbcore: registered new interface driver r8152 [ 2.780203] usbcore: registered new interface driver asix [ 2.785286] usbcore: registered new interface driver ax88179_178a [ 2.791654] usbcore: registered new interface driver cdc_ether [ 2.797614] usbcore: registered new interface driver net1080 [ 2.802964] usbcore: registered new interface driver cdc_subset [ 2.809242] usbcore: registered new interface driver zaurus [ 2.814688] usbcore: registered new interface driver cdc_ncm [ 2.820359] usbcore: registered new interface driver aqc111 [ 2.825999] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.832335] ohci-pci: OHCI PCI platform driver [ 2.836372] ohci-platform: OHCI generic platform driver [ 2.842426] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.848749] usbcore: registered new interface driver uas [ 2.852954] usbcore: registered new interface driver usb-storage [ 2.859120] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.864806] mousedev: PS/2 mouse device common for all mice [ 2.870101] usbcore: registered new interface driver xpad [ 2.877932] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.880587] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.888628] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.895276] i2c /dev entries driver [ 2.898283] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.904099] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.909593] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.914751] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.920138] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.925671] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.931048] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.944710] device-mapper: uevent: version 1.0.3 [ 2.945211] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.951595] cpuidle: Initializing cpuidle driver [ 2.955710] sdhci: Secure Digital Host Controller Interface driver [ 2.960437] sdhci: Copyright(c) Pierre Ossman [ 2.964278] Synopsys Designware Multimedia Card Interface Driver [ 2.970467] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.976703] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.977562] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.989968] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.012347] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.021697] vdd-1v0: supplied by regulator-dummy [ 3.027160] vdd-1v8-hs: supplied by regulator-dummy [ 3.032060] vdd-1v8-ls: supplied by regulator-dummy [ 3.036858] vdd-1v8-ao: supplied by regulator-dummy [ 3.040761] vddio-ddr-1v1: supplied by regulator-dummy [ 3.045230] vdd-rtc: supplied by regulator-dummy [ 3.047010] spmic-ldo1: supplied by regulator-dummy [ 3.048397] vdd-ao-3v3: supplied by regulator-dummy [ 3.054556] vddio-emmc-3v3: supplied by regulator-dummy [ 3.060885] spmic-ldo4: supplied by regulator-dummy [ 3.062096] vdd-usb-3v3: supplied by regulator-dummy [ 3.068362] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.074612] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.080227] spmic-ldo8: supplied by vdd-1v8-ls [ 3.081693] gpio-510 (gpio_default): hogged as output/high [ 3.083084] gpio-511 (gpio_default): hogged as output/high [ 3.085970] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.223059] max77686-rtc max77620-rtc: registered as rtc0 [ 3.224432] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.224819] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.074245] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.075513] hid: raw HID events driver (C) Jiri Kosina [ 4.076213] usbcore: registered new interface driver usbhid [ 4.076361] usbhid: USB HID core driver [ 4.078398] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.079556] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.844870] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.919509] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 75.446 ms) ÿá[ 4.164188] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.164782] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.165781] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.166574] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.168198] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.168793] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.169281] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.170379] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.170605] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.172258] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.180417] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.186809] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.191954] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.198281] denver_knobs_init:MTS_VERSION:55637613 [ 4.210678] t19x_cache tegra-cache: probed [ 4.213183] optee: probing for conduit method. [ 4.214014] optee: revision 3.16 (65cc2218) [ 4.214902] optee: dynamic shared memory is enabled [ 4.219187] optee: initialized driver [ 4.225651] nvpmodel: initialized successfully [ 4.226637] tegra_hv: get_hvd: not initialized yet [ 4.231305] user_ivc_mempool: hypervisor not present [ 4.237663] usbcore: registered new interface driver snd-usb-audio [ 4.244197] u32 classifier [ 4.245065] input device check on [ 4.248948] Actions configured [ 4.252728] Initializing XFRM netlink socket [ 4.257541] NET: Registered protocol family 10 [ 4.264617] Segment Routing with IPv6 [ 4.265041] NET: Registered protocol family 17 [ 4.269112] NET: Registered protocol family 15 [ 4.273401] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.286862] Bluetooth: RFCOMM socket layer initialized [ 4.291635] Bluetooth: RFCOMM ver 1.11 [ 4.295771] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.301367] Bluetooth: HIDP socket layer initialized [ 4.307593] 9pnet: Installing 9P2000 support [ 4.310853] Key type dns_resolver registered [ 4.316749] registered taskstats version 1 [ 4.319562] Loading compiled-in X.509 certificates [ 4.332447] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.335313] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.345241] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.347505] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.355830] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.364391] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.482253] tegra194-pcie 14160000.pcie: Link up [ 4.485404] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.485780] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.485939] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.486523] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.486788] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.487428] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.488145] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.501932] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.502490] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.503122] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.504754] pci 0004:01:00.0: supports D1 D2 [ 4.504992] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.516189] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.516607] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.516943] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.517475] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.517799] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.517977] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.518521] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.524291] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.533046] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.542954] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.547653] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.553607] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.560172] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.568959] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.570744] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.579589] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.587720] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.703049] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.703626] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.704056] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.704239] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.704545] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.704750] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.705079] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.705592] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.727367] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.727883] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.730559] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.732006] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.733596] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.735568] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.736791] pci 0005:00:00.0: Removing from iommu group 7 [ 5.737098] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.770914] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.794498] host1x 13e10000.host1x: initialized [ 5.795903] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.796794] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.798084] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.798857] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.800162] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.800897] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.802300] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.802953] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.803955] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.804938] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.813460] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.820340] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.830294] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.836974] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.847138] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.854048] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.863797] falcon 15340000.vic: Adding to iommu group 17 [ 5.878957] falcon 15340000.vic: initialized [ 5.880094] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.885641] falcon 15380000.nvjpg: initialized [ 5.886317] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.896586] falcon 154c0000.nvenc: initialized [ 5.897168] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.906887] falcon 15a80000.nvenc1: initialized [ 5.907480] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.919720] nvdec 15480000.nvdec: initialized [ 5.920205] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.931674] nvdec 15140000.nvdec1: initialized [ 5.932197] tsec 15500000.tsec: Adding to iommu group 18 [ 5.937910] tsec 15500000.tsec: initialized [ 5.938490] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.944130] tsec 15100000.tsecb: initialized [ 5.948033] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.976415] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.989038] gpio-374 (wifi-enable): hogged as output/high [ 5.989310] gpio-431 (camera-control-output-low): hogged as output/low [ 5.989652] gpio-432 (camera-control-output-low): hogged as output/low [ 5.991585] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.994252] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.994832] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.996403] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.000618] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.006532] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.012488] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.020754] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.028249] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.039654] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.044290] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.050086] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.059265] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.068280] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.075639] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.083236] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.089320] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.099235] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.105231] pva 16000000.pva0: Adding to iommu group 22 [ 6.134230] pva 16000000.pva0: initialized [ 6.138267] pva 16800000.pva1: Adding to iommu group 23 [ 6.149307] pva 16800000.pva1: initialized [ 6.153068] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.174348] nvdla 15880000.nvdla0: initialized [ 6.176364] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.186279] nvdla 158c0000.nvdla1: initialized [ 6.190601] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.190952] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.191258] tegradccommon 15200000.display-hub: dma mapping done [ 6.191443] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.191636] tegradc 15200000.display: Adding to iommu group 26 [ 6.192002] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.193711] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.194819] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.195358] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.200351] tegra_cec 3960000.tegra_cec: probed [ 6.201449] tegradc 15210000.display: Adding to iommu group 26 [ 6.202196] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.202367] generic_infoframe_type: 0x87 [ 6.202460] tegradc 15200000.display: DT parsed successfully [ 6.202616] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.206287] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.206420] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.206429] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.206433] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.207277] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.207286] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.208355] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.210947] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.211678] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.224055] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.229202] tegradc 15210000.display: disp0 connected to head1->sor [ 6.235871] kfuse 3830000.kfuse: initialized [ 6.241109] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.250272] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.257851] tegradc 15210000.display: DT parsed successfully [ 6.265453] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.266299] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.271619] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.278726] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.370248] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.375192] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.384516] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.389777] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.410309] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.410683] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.411919] random: crng init done [ 6.412922] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.424941] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.433490] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.439953] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.447398] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.454581] usb usb1: Product: xHCI Host Controller [ 6.459766] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.465933] usb usb1: SerialNumber: 3610000.xhci [ 6.471768] hub 1-0:1.0: USB hub found [ 6.474232] hub 1-0:1.0: 4 ports detected [ 6.479182] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.483792] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.491637] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.499285] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.506964] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.514198] usb usb2: Product: xHCI Host Controller [ 6.519438] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.525674] usb usb2: SerialNumber: 3610000.xhci [ 6.531251] hub 2-0:1.0: USB hub found [ 6.533916] hub 2-0:1.0: 4 ports detected [ 6.578669] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.585370] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.587148] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.587318] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.600672] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.601763] tegra194-cpufreq ccplex: probed with BWMGR [ 6.603147] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.603583] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.603989] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.605437] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.612231] tegra194-vi5 15c10000.vi: initialized [ 6.613583] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.614016] generic_infoframe_type: 0x87 [ 6.615020] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.618263] tegradc 15200000.display: DT parsed successfully [ 6.623799] mmc0: CQHCI version 5.10 [ 6.624476] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.629973] tegradc 15200000.display: Display dc.0000000062551f12 registered with id=0 [ 6.633898] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.642169] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.649757] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.652678] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.656017] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.656020] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.656388] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.664248] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.664254] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.670180] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.671098] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.679207] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.679218] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.687627] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.696770] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.702390] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.714463] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.716478] tegradc 15200000.display: probed [ 6.720623] nvethernet 2490000.ethernet: Macsec not supported [ 6.738712] mmc0: Command Queue Engine enabled [ 6.788531] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.788542] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.789565] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.795645] mmc0: periodic cache flush enabled [ 6.803552] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.809242] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.813839] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.821604] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.828624] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.834245] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.852583] Console: switching to colour frame buffer device 240x67 [ 6.856791] tegra-se-nvhost 15810000.se: initialized [ 6.858518] tegradc 15200000.display: fb registered [ 6.858584] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.868448] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.872331] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.874668] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.880792] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.888538] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.894693] tegra-se-nvhost 15820000.se: initialized [ 6.912714] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.917661] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.924447] tegra-se-nvhost 15830000.se: initialized [ 6.929936] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.935131] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.941945] tegra-se-nvhost 15840000.se: initialized [ 6.947918] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.953546] tegra_actmon d230000.actmon: in actmon_register()... [ 6.958289] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.963966] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.965316] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.972133] hvc_sysfs: hypervisor is not present [ 6.981867] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.989764] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.992982] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.009006] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.016274] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.020818] usb 1-2: Manufacturer: Generic [ 7.026979] hub 1-2:1.0: USB hub found [ 7.030062] hub 1-2:1.0: 4 ports detected [ 7.049829] ALSA device list: [ 7.049938] No soundcards found. [ 7.050863] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.051093] Extcon AUX1(HDMI) enable [ 7.051317] tegradc 15210000.display: disp1 connected to head1->sor [ 7.056791] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.064108] tegradc 15210000.display: DT parsed successfully [ 7.069751] tegradc 15210000.display: Display dc.000000003412c155 registered with id=1 [ 7.077858] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.083830] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.096947] tegradc 15210000.display: probed [ 7.097323] tegradc 15210000.display: fb registered [ 7.102356] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.105986] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.108127] Freeing unused kernel memory: 3968K [ 7.113796] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.113829] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.131781] tegradc 15210000.display: blank - powerdown [ 7.136676] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.138284] Run /init as init process [ 7.144935] Extcon DP: HPD disabled [ 7.152462] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.158890] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.158895] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.172820] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.179900] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.187061] usb 2-3: Product: 4-Port USB 3.0 Hub ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.192067] usb 2-3: Manufacturer: Generic [ 7.192171] tegradc 15200000.display: blank - powerdown [ 7.202214] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.206655] hub 2-3:1.0: USB hub found [ 7.208580] hub 2-3:1.0: 4 ports detected [ 7.225398] Root device found: mmcblk0p1 [ 7.227801] Found dev node: /dev/mmcblk0p1 [ 7.232411] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.232415] Extcon AUX1(HDMI) disable [ 7.255678] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.256553] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.263025] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.266770] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.266775] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.267123] Rootfs mounted over mmcblk0p1 [ 7.269908] tegradc 15200000.display: unblank [ 7.271090] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.271297] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.277363] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.279295] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.283347] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.283351] Extcon AUX1(HDMI) enable [ 7.294197] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.296060] tegradc 15200000.display: sync windows ret = 247 [ 7.296929] Switching from initrd to actual rootfs [ 7.345953] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.353280] Extcon HDMI: HPD enabled [ 7.356857] tegradc 15200000.display: hdmi: plugged [ 7.447295] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.448757] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.450084] usb 1-3: Product: Bluetooth Radio [ 7.451356] usb 1-3: Manufacturer: Realtek [ 7.452595] usb 1-3: SerialNumber: 00e04c000001 [ 7.514832] systemd[1]: System time before build time, advancing clock. [ 7.587380] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.592289] systemd[1]: Detected architecture arm64. [ 7.637030] systemd[1]: Set hostname to . [ 7.796287] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.145700] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.147552] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.153313] systemd[1]: Created slice system-modprobe.slice. [ 8.158084] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.162368] systemd[1]: Created slice User and Session Slice. [ 8.165828] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.169974] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.173352] systemd[1]: Reached target User and Group Name Lookups. [ 8.176762] systemd[1]: Reached target Slices. [ 8.179823] systemd[1]: Reached target Swap. [ 8.183816] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.187504] systemd[1]: Listening on Syslog Socket. [ 8.191069] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.194552] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.201790] systemd[1]: Listening on Journal Audit Socket. [ 8.205483] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.209358] systemd[1]: Listening on Journal Socket. [ 8.213186] systemd[1]: Listening on udev Control Socket. [ 8.216708] systemd[1]: Listening on udev Kernel Socket. [ 8.225511] systemd[1]: Mounting Huge Pages File System... [ 8.234073] systemd[1]: Mounting POSIX Message Queue File System... [ 8.242641] systemd[1]: Mounting RPC Pipe File System... [ 8.251486] systemd[1]: Mounting Kernel Debug File System... [ 8.260315] systemd[1]: Mounting Kernel Trace File System... [ 8.270708] systemd[1]: Starting Journal Service... [ 8.280130] systemd[1]: Starting Set the console keyboard layout... [ 8.288977] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.292710] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.299910] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.308350] systemd[1]: Started Nameserver information manager. [ 8.313222] systemd[1]: Reached target Network (Pre). [ 8.320537] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.322504] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.329657] systemd[1]: Starting Load Kernel Modules... [ 8.337939] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.347556] systemd[1]: Starting udev Coldplug all Devices... [ 8.357720] systemd[1]: Mounted Huge Pages File System. [ 8.361703] systemd[1]: Mounted POSIX Message Queue File System. [ 8.365459] systemd[1]: Mounted RPC Pipe File System. [ 8.368869] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.373976] systemd[1]: Mounted Kernel Debug File System. [ 8.374183] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.377962] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.377968] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.377977] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.377981] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.378389] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.378493] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.388166] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.388800] systemd[1]: Mounted Kernel Trace File System. [ 8.389713] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.399104] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.404094] systemd[1]: nvfb-udev.service: Succeeded. [ 8.408373] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.418742] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.424922] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.427262] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.437337] systemd[1]: Starting Load/Save Random Seed... [ 8.446783] systemd[1]: Starting Create System Users... [ 8.488699] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.488699] [ 8.501524] systemd[1]: Finished Load/Save Random Seed. [ 8.508746] systemd[1]: Finished Create System Users. [ 8.517684] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.525358] systemd[1]: Finished Load Kernel Modules. [ 8.530382] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.538197] systemd[1]: Mounting Kernel Configuration File System... [ 8.546171] systemd[1]: Started OP-TEE Client Supplicant. [ 8.554878] systemd[1]: Starting Apply Kernel Variables... [ 8.566302] systemd[1]: Finished Set the console keyboard layout. [ 8.570498] systemd[1]: Mounted Kernel Configuration File System. [ 8.582628] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.589275] systemd[1]: Reached target Local File Systems (Pre). [ 8.593210] systemd[1]: Reached target Local File Systems. [ 8.596640] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 8.603432] systemd[1]: Starting Enable support for additional executable binary formats... [ 8.611046] systemd[1]: Starting Set console font and keymap... [ 10.034930] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.042816] imx219 9-0010: board setup failed [ 10.044705] imx219: probe of 9-0010 failed with error -121 [ 10.058549] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.105805] imx219 10-0010: board setup failed [ 10.115682] hot-surface-alert cooling state: 0 -> 1 [ 10.116882] imx219: probe of 10-0010 failed with error -121 [ 10.988764] using random self ethernet address [ 10.997810] using random host ethernet address [ 11.739476] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.741207] Creating 1 MTD partitions on "spi6.0": [ 11.742874] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.295044] using random self ethernet address [ 12.303260] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.908866] nvidia: loading out-of-tree module taints kernel. [ 29.596098] tegradc 15200000.display: sor_poll_register 0x16: timeout [ 29.596110] tegradc 15200000.display: dc timeout waiting for HEAD MODE = SLEEP [ 59.207663] watchdog: watchdog0: watchdog did not stop! [ 59.655685] Trying to unregister non-registered hwtime source [ 62.712139] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.713684] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.587] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.589] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäÿâclk_early initialized ÿäI/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿänalÿâadc initialized ÿä ÿâfmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 0ÿâclk_dt_late initialized ÿä3ÿânoc_late initialized pm_post initialized dbells initialized ÿä:23ÿâdmce initialized ÿä:ÿâcvc initialized ÿä20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarchÿâavfs_clk_platform_post initialized ÿä64ÿâcvc_late initialized regulator_post initialized ÿä Iÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä/TC: WARNING: This OP-TEE configuration migÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäht be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.211] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.254] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.263] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.321] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.330] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.379] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.388] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.417] initializing threads [0003.420] initializing timers [0003.422] creating bootstrap completion thread [0003.427] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.473] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.532] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.548] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> hdmi cable connected [0003.609] W> set volts not configured for 'vdd-1v0' [0003.615] W> set volts not configured for 'vdd-1v8-hs' [0003.615] I> retrieved tmds range from prod_list_hdmi_soc [0003.622] E> invalid display type [0003.623] E> cannot find any other nvdisp nodes [0003.639] I> edid read success [0003.651] I> edid read success [0003.652] I> width = 640, height = 480, frequency = 25174825 [0003.652] I> width = 1920, height = 1080, frequency = 148500000 [0003.653] I> width = 1280, height = 768, frequency = 79500000 [0003.653] I> width = 1360, height = 768, frequency = 85500000 [0003.653] I> width = 720, height = 480, frequency = 26973026 [0003.657] I> width = 720, height = 576, frequency = 26973026 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.686] I> width = 720, height = 480, frequency = 26973026 [0003.691] I> width = 720, height = 576, frequency = 26973026 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 4096, height = 2160, frequency = 296703296 [0003.726] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.737] I> hdmi_enable, starting HDMI initialisation [0003.742] I> hdmi_enable, HDMI initialisation complete [0003.751] initializing target [0003.752] calling apps_init() [0003.753] starting app kernel_boot_app [0003.753] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932988K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475328K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000664] Console: colour dummy device 80x25 [ 0.002078] printk: console [tty0] enabled [ 0.002137] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002171] pid_max: default: 32768 minimum: 301 [ 0.002333] LSM: Security Framework initializing [ 0.002389] Yama: becoming mindful. [ 0.002435] SELinux: Initializing. [ 0.002577] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002626] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005668] rcu: Hierarchical SRCU implementation. [ 0.005916] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006622] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006676] DTB Build time: Aug 10 2022 20:31:49 [ 0.009288] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009520] Remapping and enabling EFI services. [ 0.011636] smp: Bringing up secondary CPUs ... [ 0.040908] Detected PIPT I-cache on CPU1 [ 0.041007] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070489] Detected PIPT I-cache on CPU2 [ 0.070566] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100164] Detected PIPT I-cache on CPU3 [ 0.100306] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.129972] Detected PIPT I-cache on CPU4 [ 0.130134] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.159881] Detected PIPT I-cache on CPU5 [ 0.160004] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160345] smp: Brought up 1 node, 6 CPUs [ 0.160557] SMP: Total of 6 processors activated. [ 0.160619] CPU features: detected: Privileged Access Never [ 0.160658] CPU features: detected: LSE atomic instructions [ 0.160671] CPU features: detected: User Access Override [ 0.160683] CPU features: detected: 32-bit EL0 Support [ 0.160695] CPU features: detected: RAS Extension Support [ 0.160707] CPU features: detected: CRC32 instructions [ 0.160720] CPU features: detected: 32-bit EL1 Support [ 0.231646] CPU: All CPU(s) started at EL2 [ 0.237384] devtmpfs: initialized [ 0.303642] Registered cp15_barrier emulation handler [ 0.303734] Registered setend emulation handler [ 0.303769] KASLR enabled [ 0.304062] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.304112] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.306200] pinctrl core: initialized pinctrl subsystem [ 0.307342] SMBIOS 3.0.0 present. [ 0.307388] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.308350] NET: Registered protocol family 16 [ 0.311254] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.311992] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.313060] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.313149] audit: initializing netlink subsys (disabled) [ 0.313504] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1 [ 0.314066] thermal_sys: Registered thermal governor 'step_wise' [ 0.314075] thermal_sys: Registered thermal governor 'power_allocator' [ 0.314137] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.317532] cpuidle: using governor menu [ 0.318115] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.318625] ASID allocator initialised with 32768 entries [ 0.318948] Serial: AMBA PL011 UART driver [ 0.324019] Tegra reboot handler registered. [ 0.421742] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.421975] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.422254] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.422339] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.422558] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.422693] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.422942] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.423066] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.423284] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.423372] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.426547] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.426610] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.426656] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.426712] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.426766] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.426807] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.426846] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.426921] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.427062] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.427138] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.427178] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.427252] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.427294] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.427329] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.427364] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.427399] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.427434] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.427579] mc-err: mcerr ops are set to t19x [ 0.444062] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.444092] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.444132] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.444152] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.452143] ACPI: Interpreter disabled. [ 0.453743] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.455502] iommu: Default domain type: Translated [ 0.455604] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.456167] SCSI subsystem initialized [ 0.456374] usbcore: registered new interface driver usbfs [ 0.456432] usbcore: registered new interface driver hub [ 0.456481] usbcore: registered new device driver usb [ 0.456940] mc: Linux media interface: v0.10 [ 0.456983] videodev: Linux video capture interface: v2.00 [ 0.457388] pps_core: LinuxPPS API ver. 1 registered [ 0.457407] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.457437] PTP clock support registered [ 0.457688] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.458017] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.458109] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.458836] Registered efivars operations [ 0.466005] FPGA manager framework [ 0.466142] Advanced Linux Sound Architecture Driver Initialized. [ 0.466935] Bluetooth: Core ver 2.22 [ 0.467025] NET: Registered protocol family 31 [ 0.467042] Bluetooth: HCI device and connection manager initialized [ 0.467088] Bluetooth: HCI socket layer initialized [ 0.467106] Bluetooth: L2CAP socket layer initialized [ 0.467137] Bluetooth: SCO socket layer initialized [ 0.469277] camchar: rtcpu character device driver loaded [ 0.470107] clocksource: Switched to clocksource arch_sys_counter [ 0.890876] VFS: Disk quotas dquot_6.6.0 [ 0.890963] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.891434] pnp: PnP ACPI: disabled [ 0.906739] la/ptsa driver initialized. [ 0.906913] NET: Registered protocol family 2 [ 0.907102] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.915741] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.915946] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.916317] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.916949] TCP: Hash tables configured (established 65536 bind 65536) [ 0.917085] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.917226] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.917482] NET: Registered protocol family 1 [ 0.918502] RPC: Registered named UNIX socket transport module. [ 0.918540] RPC: Registered udp transport module. [ 0.918561] RPC: Registered tcp transport module. [ 0.918581] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.918613] PCI: CLS 0 bytes, default 64 [ 0.918994] Trying to unpack rootfs image as initramfs... [ 1.183646] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.186729] Freeing initrd memory: 8196K [ 1.190839] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.190879] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.190919] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.191239] kvm [1]: IPA Size Limit: 40 bits [ 1.191788] kvm [1]: vgic interrupt IRQ9 [ 1.192421] kvm [1]: VHE mode initialized successfully [ 1.193823] Initialise system trusted keyrings [ 1.194286] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.200260] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.201209] NFS: Registering the id_resolver key type [ 1.201252] Key type id_resolver registered [ 1.201270] Key type id_legacy registered [ 1.201357] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.201384] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.201428] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.211519] NET: Registered protocol family 38 [ 1.211572] Key type asymmetric registered [ 1.211591] Asymmetric key parser 'x509' registered [ 1.211642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.211971] io scheduler mq-deadline registered [ 1.211991] io scheduler kyber registered [ 1.217241] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.219863] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.219949] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.220047] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.220150] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.220249] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.224999] scrncapt: init (heads:4 wins:6 planes:4) [ 1.225218] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.226085] EINJ: ACPI disabled. [ 1.228932] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.228958] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.229004] tegra-pmc: ### PMC reset level: L1 [ 1.229018] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.229064] tegra-pmc: PMC Prod config success [ 1.234131] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.239016] random: fast init done [ 1.239592] printk: console [ttyTCU0] enabled [ 2.791484] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.796003] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.800526] arm-smmu 10000000.iommu: stage 1 translation [ 2.805780] arm-smmu 10000000.iommu: stage 2 translation [ 2.811551] arm-smmu 10000000.iommu: nested translation [ 2.816634] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.823809] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.833802] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.837192] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.843494] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.851504] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.856551] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.861266] arm-smmu 12000000.iommu: stage 1 translation [ 2.867024] arm-smmu 12000000.iommu: stage 2 translation [ 2.872192] arm-smmu 12000000.iommu: nested translation [ 2.877877] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.885093] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.895038] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.897899] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.904772] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.911893] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.921746] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.925174] tegra_profiler: auth: init [ 2.929383] THERMAL EST: found 3 subdevs [ 2.932577] THERMAL EST num_resources: 0 [ 2.936676] [THERMAL EST subdev 0] [ 2.939742] [THERMAL EST subdev 1] [ 2.943412] [THERMAL EST subdev 2] [ 2.946407] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.952847] THERMAL EST: thz register success. [ 2.957106] THERMAL EST: end of probe, return err: 0 [ 2.962632] nvsciipc: loaded module [ 2.969677] tun: Universal TUN/TAP device driver, 1.6 [ 2.972020] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.978189] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.983994] e1000e: Intel(R) PRO/1000 Network Driver [ 2.988655] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.995000] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.000287] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.006526] PPP generic driver version 2.4.2 [ 3.010741] PPP BSD Compression module registered [ 3.015012] PPP Deflate Compression module registered [ 3.020256] PPP MPPE Compression module registered [ 3.025527] usbcore: registered new interface driver r8152 [ 3.030820] usbcore: registered new interface driver asix [ 3.036364] usbcore: registered new interface driver ax88179_178a [ 3.042500] usbcore: registered new interface driver cdc_ether [ 3.048181] usbcore: registered new interface driver net1080 [ 3.053785] usbcore: registered new interface driver cdc_subset [ 3.060087] usbcore: registered new interface driver zaurus [ 3.065804] usbcore: registered new interface driver cdc_ncm [ 3.071487] usbcore: registered new interface driver aqc111 [ 3.077116] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.082912] ohci-pci: OHCI PCI platform driver [ 3.087467] ohci-platform: OHCI generic platform driver [ 3.093256] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.099343] usbcore: registered new interface driver uas [ 3.103531] usbcore: registered new interface driver usb-storage [ 3.109893] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.115640] mousedev: PS/2 mouse device common for all mice [ 3.120656] usbcore: registered new interface driver xpad [ 3.129097] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.131440] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.139191] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.145729] i2c /dev entries driver [ 3.149359] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.155128] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.160314] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.165646] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.170949] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.176411] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.181822] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.195857] device-mapper: uevent: version 1.0.3 [ 3.196317] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.202682] cpuidle: Initializing cpuidle driver [ 3.206258] sdhci: Secure Digital Host Controller Interface driver [ 3.211254] sdhci: Copyright(c) Pierre Ossman [ 3.215103] Synopsys Designware Multimedia Card Interface Driver [ 3.221553] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.227511] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.228339] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.240848] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.260204] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.269992] vdd-1v0: supplied by regulator-dummy [ 3.275731] vdd-1v8-hs: supplied by regulator-dummy [ 3.280657] vdd-1v8-ls: supplied by regulator-dummy [ 3.285453] vdd-1v8-ao: supplied by regulator-dummy [ 3.289407] vddio-ddr-1v1: supplied by regulator-dummy [ 3.293847] vdd-rtc: supplied by regulator-dummy [ 3.295669] spmic-ldo1: supplied by regulator-dummy [ 3.296880] vdd-ao-3v3: supplied by regulator-dummy [ 3.303057] vddio-emmc-3v3: supplied by regulator-dummy [ 3.309362] spmic-ldo4: supplied by regulator-dummy [ 3.310566] vdd-usb-3v3: supplied by regulator-dummy [ 3.316755] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.322984] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.328723] spmic-ldo8: supplied by vdd-1v8-ls [ 3.330450] gpio-510 (gpio_default): hogged as output/high [ 3.331871] gpio-511 (gpio_default): hogged as output/high [ 3.334762] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.473403] max77686-rtc max77620-rtc: registered as rtc0 [ 3.474633] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.475031] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.252413] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.253666] hid: raw HID events driver (C) Jiri Kosina [ 4.254574] usbcore: registered new interface driver usbhid [ 4.254720] usbhid: USB HID core driver [ 4.256731] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.258145] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.285341] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.359548] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.016 ms) ÿá[ 4.342544] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.343148] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.344182] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.344947] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.347025] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.347713] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.348564] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.349866] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.350255] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.353145] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.358577] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.365036] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.370516] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.376094] denver_knobs_init:MTS_VERSION:55637613 [ 4.389620] t19x_cache tegra-cache: probed [ 4.393836] optee: probing for conduit method. [ 4.394806] optee: revision 3.16 (65cc2218) [ 4.395793] optee: dynamic shared memory is enabled [ 4.397754] optee: initialized driver [ 4.403887] nvpmodel: initialized successfully [ 4.404825] tegra_hv: get_hvd: not initialized yet [ 4.409507] user_ivc_mempool: hypervisor not present [ 4.415734] usbcore: registered new interface driver snd-usb-audio [ 4.422242] u32 classifier [ 4.423227] input device check on [ 4.426945] Actions configured [ 4.430885] Initializing XFRM netlink socket [ 4.435674] NET: Registered protocol family 10 [ 4.442224] Segment Routing with IPv6 [ 4.442851] NET: Registered protocol family 17 [ 4.447359] NET: Registered protocol family 15 [ 4.451515] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.465199] Bluetooth: RFCOMM socket layer initialized [ 4.470028] Bluetooth: RFCOMM ver 1.11 [ 4.473716] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.479786] Bluetooth: HIDP socket layer initialized [ 4.485538] 9pnet: Installing 9P2000 support [ 4.489254] Key type dns_resolver registered [ 4.494495] registered taskstats version 1 [ 4.497629] Loading compiled-in X.509 certificates [ 4.510232] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.512994] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.523845] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.525329] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.534235] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.542475] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.658153] tegra194-pcie 14160000.pcie: Link up [ 4.661021] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.661238] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.661409] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.661757] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.661944] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.662370] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.662826] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.674220] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.674780] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.675210] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.676775] pci 0004:01:00.0: supports D1 D2 [ 4.676928] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.687239] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.687564] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.687785] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.688121] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.688430] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.688610] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.692764] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.700089] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.708910] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.718991] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.723558] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.729203] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.736114] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.745236] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.746588] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.755022] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.763748] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.866254] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.866693] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.867005] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.867170] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.867514] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.867771] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.868246] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.868701] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.888803] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.889203] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.891585] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.893014] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.894516] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.896000] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.897213] pci 0005:00:00.0: Removing from iommu group 7 [ 5.897593] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.932622] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.958312] host1x 13e10000.host1x: initialized [ 5.959808] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.960889] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.962563] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.963309] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.964678] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.965276] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.966595] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.967286] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.968541] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.969164] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.976567] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.983299] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.993121] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.000363] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.010047] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.017277] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.026938] falcon 15340000.vic: Adding to iommu group 17 [ 6.041824] falcon 15340000.vic: initialized [ 6.042811] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.048624] falcon 15380000.nvjpg: initialized [ 6.049323] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.060359] falcon 154c0000.nvenc: initialized [ 6.060996] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.070150] falcon 15a80000.nvenc1: initialized [ 6.070800] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.083529] nvdec 15480000.nvdec: initialized [ 6.084085] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.094285] nvdec 15140000.nvdec1: initialized [ 6.094812] tsec 15500000.tsec: Adding to iommu group 18 [ 6.100262] tsec 15500000.tsec: initialized [ 6.100800] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.107810] tsec 15100000.tsecb: initialized [ 6.111892] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.137390] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.148944] gpio-374 (wifi-enable): hogged as output/high [ 6.149305] gpio-431 (camera-control-output-low): hogged as output/low [ 6.149652] gpio-432 (camera-control-output-low): hogged as output/low [ 6.151113] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.153112] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.153634] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.158476] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.163854] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.169463] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.175098] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.183702] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.190691] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.202263] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.207608] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.213495] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.222191] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.231659] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.238650] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.246123] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.252395] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.262446] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.268310] pva 16000000.pva0: Adding to iommu group 22 [ 6.297250] pva 16000000.pva0: initialized [ 6.302057] pva 16800000.pva1: Adding to iommu group 23 [ 6.314456] pva 16800000.pva1: initialized [ 6.319122] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.333670] nvdla 15880000.nvdla0: initialized [ 6.335131] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.353230] nvdla 158c0000.nvdla1: initialized [ 6.357677] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.357721] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.357972] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.358386] tegradc 15200000.display: Adding to iommu group 26 [ 6.358631] random: crng init done [ 6.358684] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.358793] tegradccommon 15200000.display-hub: dma mapping done [ 6.359707] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.360968] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.361424] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.367173] tegra_cec 3960000.tegra_cec: probed [ 6.367411] tegradc 15210000.display: Adding to iommu group 26 [ 6.367539] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.367726] generic_infoframe_type: 0x87 [ 6.367827] tegradc 15200000.display: DT parsed successfully [ 6.367915] tegradc 15200000.display: Display dc.0000000051433509 registered with id=0 [ 6.372521] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.372856] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.375551] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.376096] kfuse 3830000.kfuse: initialized [ 6.376657] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.376665] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.377243] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.378332] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.384226] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.384240] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.385481] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.390548] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.393839] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.402473] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.411153] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.416976] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.425460] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.428046] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.434235] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.451960] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.456378] tegradc 15210000.display: disp0 connected to head1->sor [ 6.462590] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.470987] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.476424] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.482870] tegradc 15210000.display: DT parsed successfully [ 6.489935] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.497756] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.596689] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.603344] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.610618] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.617762] usb usb1: Product: xHCI Host Controller [ 6.622493] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.628713] usb usb1: SerialNumber: 3610000.xhci [ 6.634982] hub 1-0:1.0: USB hub found [ 6.637723] hub 1-0:1.0: 4 ports detected [ 6.642697] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.647051] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.654801] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.662502] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.670416] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.677629] usb usb2: Product: xHCI Host Controller [ 6.682340] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.688550] usb usb2: SerialNumber: 3610000.xhci [ 6.693929] hub 2-0:1.0: USB hub found [ 6.697026] hub 2-0:1.0: 4 ports detected [ 6.740372] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.747525] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.749056] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.749245] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.762313] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.763468] tegra194-cpufreq ccplex: probed with BWMGR [ 6.764724] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.765170] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.765603] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.766921] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.774168] tegra194-vi5 15c10000.vi: initialized [ 6.775360] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.776238] mmc0: CQHCI version 5.10 [ 6.776696] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.776878] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.776883] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.776890] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.776894] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.776898] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.777431] generic_infoframe_type: 0x87 [ 6.782128] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.787095] tegradc 15200000.display: DT parsed successfully [ 6.795463] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.795490] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.797089] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.801877] tegradc 15200000.display: Display dc.00000000e7dafaf0 registered with id=0 [ 6.809225] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.815618] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.825212] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.825216] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.825562] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.831601] nvethernet 2490000.ethernet: Macsec not supported [ 6.832914] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.837634] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.837826] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.845144] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.895625] mmc0: Command Queue Engine enabled [ 6.899146] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.899997] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.900002] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.902321] tegradc 15200000.display: probed [ 6.905189] mmc0: periodic cache flush enabled [ 6.905207] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.910148] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.911109] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.919573] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.926479] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.936063] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.943284] tegra-se-nvhost 15810000.se: initialized [ 6.964196] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.973297] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.035071] Console: switching to colour frame buffer device 240x67 [ 7.035242] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.040820] tegradc 15200000.display: fb registered [ 7.040909] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.047872] tegra-se-nvhost 15820000.se: initialized [ 7.063318] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.064494] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.074871] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.075044] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.087334] tegra-se-nvhost 15830000.se: initialized [ 7.092897] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.098422] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.101238] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.104684] tegra-se-nvhost 15840000.se: initialized [ 7.112403] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.119056] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.124467] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.124478] usb 1-2: Manufacturer: Generic [ 7.132144] tegra_actmon d230000.actmon: in actmon_register()... [ 7.137921] hub 1-2:1.0: USB hub found [ 7.139899] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.145022] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.146091] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.149803] hub 1-2:1.0: 4 ports detected [ 7.154862] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.155113] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.155710] hvc_sysfs: hypervisor is not present [ 7.218949] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.221996] ALSA device list: [ 7.222127] No soundcards found. [ 7.222991] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.223188] Extcon AUX1(HDMI) enable [ 7.223436] tegradc 15210000.display: disp1 connected to head1->sor [ 7.227017] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.234166] tegradc 15210000.display: DT parsed successfully [ 7.240079] tegradc 15210000.display: Display dc.0000000065b29b9f registered with id=1 [ 7.247890] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.254244] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.256188] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.266995] tegradc 15210000.display: probed [ 7.268751] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.280133] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.280137] usb 2-3: Manufacturer: Generic [ 7.288880] tegradc 15210000.display: fb registered [ 7.290709] hub 2-3:1.0: USB hub found [ 7.297506] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.299773] hub 2-3:1.0: 4 ports detected [ 7.305419] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.307359] Freeing unused kernel memory: 3968K [ 7.321780] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.327229] tegradc 15210000.display: blank - powerdown [ 7.332205] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.334311] Run /init as init process [ 7.340499] Extcon DP: HPD disabled [ 7.340504] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.340519] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.347421] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.362125] tegra_cec 3960000.tegra_cec: physical address: 10:00. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.373494] tegradc 15200000.display: blank - powerdown [ 7.374093] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.412162] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.412167] Extcon AUX1(HDMI) disable [ 7.426675] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.426681] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.435435] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.436418] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.449422] tegradc 15200000.display: unblank [ 7.450473] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.450662] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.456279] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.458101] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.462018] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.462022] Extcon AUX1(HDMI) enable [ 7.474867] tegradc 15200000.display: sync windows ret = 247 [ 7.503249] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.504797] Extcon HDMI: HPD enabled [ 7.506212] tegradc 15200000.display: hdmi: plugged [ 7.523381] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.524955] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.526419] usb 1-3: Product: Bluetooth Radio [ 7.527784] usb 1-3: Manufacturer: Realtek [ 7.529088] usb 1-3: SerialNumber: 00e04c000001 [ 7.555130] Root device found: mmcblk0p1 [ 7.558737] Found dev node: /dev/mmcblk0p1 [ 7.594625] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.600012] Rootfs mounted over mmcblk0p1 [ 7.636554] Switching from initrd to actual rootfs [ 7.802035] systemd[1]: System time before build time, advancing clock. [ 7.872690] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.877736] systemd[1]: Detected architecture arm64. [ 7.923344] systemd[1]: Set hostname to . [ 8.088967] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.437218] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.439112] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.444512] systemd[1]: Created slice system-modprobe.slice. [ 8.449419] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.453646] systemd[1]: Created slice User and Session Slice. [ 8.457102] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.461223] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.464682] systemd[1]: Reached target User and Group Name Lookups. [ 8.468053] systemd[1]: Reached target Slices. [ 8.471176] systemd[1]: Reached target Swap. [ 8.475222] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.478993] systemd[1]: Listening on Syslog Socket. [ 8.482635] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.486165] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.490391] systemd[1]: Listening on Journal Audit Socket. [ 8.493987] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.499005] systemd[1]: Listening on Journal Socket. [ 8.502730] systemd[1]: Listening on udev Control Socket. [ 8.507552] systemd[1]: Listening on udev Kernel Socket. [ 8.515817] systemd[1]: Mounting Huge Pages File System... [ 8.524476] systemd[1]: Mounting POSIX Message Queue File System... [ 8.533429] systemd[1]: Mounting RPC Pipe File System... [ 8.545375] systemd[1]: Mounting Kernel Debug File System... [ 8.555361] systemd[1]: Mounting Kernel Trace File System... [ 8.565372] systemd[1]: Starting Journal Service... [ 8.574171] systemd[1]: Starting Set the console keyboard layout... [ 8.582382] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.585945] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.592408] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.600221] systemd[1]: Started Nameserver information manager. [ 8.604970] systemd[1]: Reached target Network (Pre). [ 8.612173] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.615535] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.624680] systemd[1]: Starting Load Kernel Modules... [ 8.632685] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.640873] systemd[1]: Starting udev Coldplug all Devices... [ 8.652408] systemd[1]: Mounted Huge Pages File System. [ 8.656066] systemd[1]: Mounted POSIX Message Queue File System. [ 8.660010] systemd[1]: Mounted RPC Pipe File System. [ 8.660328] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.666983] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.667907] systemd[1]: Mounted Kernel Debug File System. [ 8.669254] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.671500] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.671514] nvmap_page_pool_init: Total RAM pages: 1752672 [ 8.671518] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.671899] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.674111] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.674663] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.681162] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.684119] systemd[1]: Mounted Kernel Trace File System. [ 8.690697] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.695343] systemd[1]: nvfb-udev.service: Succeeded. [ 8.699366] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.708577] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.717115] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.719514] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.731516] systemd[1]: Starting Load/Save Random Seed... [ 8.739442] systemd[1]: Starting Create System Users... [ 8.792220] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.792220] [ 8.804682] systemd[1]: Finished Load/Save Random Seed. [ 8.811685] systemd[1]: Finished Create System Users. [ 8.819960] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.827082] systemd[1]: Finished Load Kernel Modules. [ 8.831767] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.838666] systemd[1]: Mounting Kernel Configuration File System... [ 8.847733] systemd[1]: Started OP-TEE Client Supplicant. [ 8.856520] systemd[1]: Starting Apply Kernel Variables... [ 8.866483] systemd[1]: Finished Set the console keyboard layout. [ 8.873143] systemd[1]: Mounted Kernel Configuration File System. [ 10.152696] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.159292] imx219 9-0010: board setup failed [ 10.160634] imx219: probe of 9-0010 failed with error -121 [ 10.181549] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.190011] imx219 10-0010: board setup failed [ 10.191540] imx219: probe of 10-0010 failed with error -121 [ 10.241983] hot-surface-alert cooling state: 0 -> 1 [ 10.467747] using random self ethernet address [ 10.468912] using random host ethernet address [ 11.928127] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.929427] Creating 1 MTD partitions on "spi6.0": [ 11.931206] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.504175] using random self ethernet address [ 12.505356] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.821937] nvidia: loading out-of-tree module taints kernel. [ 58.377379] watchdog: watchdog0: watchdog did not stop! [ 58.827626] Trying to unregister non-registered hwtime source [ 61.889587] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.891104] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿänal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.480] I> register 'maxim' power off handle [0003.482] I> virtual i2c enabled [0003.482] I> registered 'maxim,max20024' pmic [0003.482] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.486] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.589] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> hdmi cable connected [0003.600] W> set volts not configured for 'vdd-1v0' [0003.605] W> set volts not configured for 'vdd-1v8-hs' [0003.605] I> retrieved tmds range from prod_list_hdmi_soc [0003.610] E> invalid display type [0003.611] E> cannot find any other nvdisp nodes [0003.627] I> edid read success [0003.640] I> edid read success [0003.640] I> width = 640, height = 480, frequency = 25174825 [0003.641] I> width = 1920, height = 1080, frequency = 148500000 [0003.641] I> width = 1280, height = 768, frequency = 79500000 [0003.641] I> width = 1360, height = 768, frequency = 85500000 [0003.642] I> width = 720, height = 480, frequency = 26973026 [0003.646] I> width = 720, height = 576, frequency = 26973026 [0003.651] I> width = 1280, height = 720, frequency = 74175824 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1920, height = 1080, frequency = 148351648 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 720, height = 480, frequency = 26973026 [0003.679] I> width = 720, height = 576, frequency = 26973026 [0003.685] I> width = 3840, height = 2160, frequency = 296703296 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 4096, height = 2160, frequency = 296703296 [0003.714] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.725] I> hdmi_enable, starting HDMI initialisation [0003.730] I> hdmi_enable, HDMI initialisation complete [0003.739] initializing target [0003.740] calling apps_init() [0003.740] starting app kernel_boot_app [0003.741] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000656] Console: colour dummy device 80x25 [ 0.002002] printk: console [tty0] enabled [ 0.002063] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002098] pid_max: default: 32768 minimum: 301 [ 0.002261] LSM: Security Framework initializing [ 0.002317] Yama: becoming mindful. [ 0.002361] SELinux: Initializing. [ 0.002506] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002543] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005684] rcu: Hierarchical SRCU implementation. [ 0.005935] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006829] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006878] DTB Build time: Aug 10 2022 20:31:49 [ 0.009775] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010014] Remapping and enabling EFI services. [ 0.012781] smp: Bringing up secondary CPUs ... [ 0.043721] Detected PIPT I-cache on CPU1 [ 0.043821] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073239] Detected PIPT I-cache on CPU2 [ 0.073380] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.102904] Detected PIPT I-cache on CPU3 [ 0.103072] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132739] Detected PIPT I-cache on CPU4 [ 0.132902] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162565] Detected PIPT I-cache on CPU5 [ 0.162713] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163132] smp: Brought up 1 node, 6 CPUs [ 0.163239] SMP: Total of 6 processors activated. [ 0.163304] CPU features: detected: Privileged Access Never [ 0.163325] CPU features: detected: LSE atomic instructions [ 0.163337] CPU features: detected: User Access Override [ 0.163349] CPU features: detected: 32-bit EL0 Support [ 0.163361] CPU features: detected: RAS Extension Support [ 0.163372] CPU features: detected: CRC32 instructions [ 0.163383] CPU features: detected: 32-bit EL1 Support [ 0.233205] CPU: All CPU(s) started at EL2 [ 0.239629] devtmpfs: initialized [ 0.286295] Registered cp15_barrier emulation handler [ 0.286440] Registered setend emulation handler [ 0.286461] KASLR enabled [ 0.286725] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286752] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288137] pinctrl core: initialized pinctrl subsystem [ 0.289250] SMBIOS 3.0.0 present. [ 0.289280] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289910] NET: Registered protocol family 16 [ 0.291869] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292369] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293085] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.293150] audit: initializing netlink subsys (disabled) [ 0.293439] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.293792] thermal_sys: Registered thermal governor 'step_wise' [ 0.293799] thermal_sys: Registered thermal governor 'power_allocator' [ 0.293813] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295850] cpuidle: using governor menu [ 0.296185] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296623] ASID allocator initialised with 32768 entries [ 0.296846] Serial: AMBA PL011 UART driver [ 0.299815] Tegra reboot handler registered. [ 0.370360] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.370459] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.370655] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.370712] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.370852] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.370891] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.371028] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.371064] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.371254] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.371293] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.373382] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.373419] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.373446] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.373472] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.373500] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.373524] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.373559] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.373587] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.373617] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.373641] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.373663] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.373703] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.373748] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.373772] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.373794] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.373817] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.373839] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.373920] mc-err: mcerr ops are set to t19x [ 0.385839] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.385860] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.385872] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.385884] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.393677] ACPI: Interpreter disabled. [ 0.394767] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.395880] iommu: Default domain type: Translated [ 0.395940] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.396271] SCSI subsystem initialized [ 0.396415] usbcore: registered new interface driver usbfs [ 0.396452] usbcore: registered new interface driver hub [ 0.396484] usbcore: registered new device driver usb [ 0.396894] mc: Linux media interface: v0.10 [ 0.396921] videodev: Linux video capture interface: v2.00 [ 0.397208] pps_core: LinuxPPS API ver. 1 registered [ 0.397219] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.397238] PTP clock support registered [ 0.397432] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.397740] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.397830] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.398515] Registered efivars operations [ 0.403722] FPGA manager framework [ 0.403826] Advanced Linux Sound Architecture Driver Initialized. [ 0.404366] Bluetooth: Core ver 2.22 [ 0.404421] NET: Registered protocol family 31 [ 0.404439] Bluetooth: HCI device and connection manager initialized [ 0.404454] Bluetooth: HCI socket layer initialized [ 0.404470] Bluetooth: L2CAP socket layer initialized [ 0.404491] Bluetooth: SCO socket layer initialized [ 0.406569] camchar: rtcpu character device driver loaded [ 0.407626] clocksource: Switched to clocksource arch_sys_counter [ 0.852128] VFS: Disk quotas dquot_6.6.0 [ 0.852214] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.852670] pnp: PnP ACPI: disabled [ 0.866387] la/ptsa driver initialized. [ 0.866585] NET: Registered protocol family 2 [ 0.866798] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.875161] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.875348] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.875764] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.876400] TCP: Hash tables configured (established 65536 bind 65536) [ 0.876566] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.876694] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.877018] NET: Registered protocol family 1 [ 0.877986] RPC: Registered named UNIX socket transport module. [ 0.878014] RPC: Registered udp transport module. [ 0.878029] RPC: Registered tcp transport module. [ 0.878042] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.878066] PCI: CLS 0 bytes, default 64 [ 0.878367] Trying to unpack rootfs image as initramfs... [ 1.141319] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.144665] Freeing initrd memory: 8196K [ 1.148934] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.148968] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.149000] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.149314] kvm [1]: IPA Size Limit: 40 bits [ 1.149769] kvm [1]: vgic interrupt IRQ9 [ 1.150190] kvm [1]: VHE mode initialized successfully [ 1.151730] Initialise system trusted keyrings [ 1.152013] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.158363] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.159237] NFS: Registering the id_resolver key type [ 1.159272] Key type id_resolver registered [ 1.159286] Key type id_legacy registered [ 1.159372] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.159396] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.159461] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.169187] NET: Registered protocol family 38 [ 1.169211] Key type asymmetric registered [ 1.169226] Asymmetric key parser 'x509' registered [ 1.169311] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.169593] io scheduler mq-deadline registered [ 1.169613] io scheduler kyber registered [ 1.175489] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.178546] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.178623] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.178701] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.178771] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.178867] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.185271] scrncapt: init (heads:4 wins:6 planes:4) [ 1.185333] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.186480] EINJ: ACPI disabled. [ 1.190040] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.190066] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.190081] tegra-pmc: ### PMC reset level: L1 [ 1.190095] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.190142] tegra-pmc: PMC Prod config success [ 1.195002] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.201309] random: fast init done [ 1.212317] printk: console [ttyTCU0] enabled [ 2.752341] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.757004] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.761625] arm-smmu 10000000.iommu: stage 1 translation [ 2.767054] arm-smmu 10000000.iommu: stage 2 translation [ 2.772822] arm-smmu 10000000.iommu: nested translation [ 2.777904] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.785083] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.795761] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.798182] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.805024] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.812485] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.818063] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.822787] arm-smmu 12000000.iommu: stage 1 translation [ 2.828040] arm-smmu 12000000.iommu: stage 2 translation [ 2.833467] arm-smmu 12000000.iommu: nested translation [ 2.839150] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.846328] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.856796] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.859171] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.866012] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.873177] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.883061] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.886488] tegra_profiler: auth: init [ 2.890703] THERMAL EST: found 3 subdevs [ 2.893849] THERMAL EST num_resources: 0 [ 2.897949] [THERMAL EST subdev 0] [ 2.901013] [THERMAL EST subdev 1] [ 2.904685] [THERMAL EST subdev 2] [ 2.907696] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.914128] THERMAL EST: thz register success. [ 2.918371] THERMAL EST: end of probe, return err: 0 [ 2.923954] nvsciipc: loaded module [ 2.931072] tun: Universal TUN/TAP device driver, 1.6 [ 2.933265] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.939704] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.945002] e1000e: Intel(R) PRO/1000 Network Driver [ 2.950187] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.956005] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.961560] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.967825] PPP generic driver version 2.4.2 [ 2.971774] PPP BSD Compression module registered [ 2.976527] PPP Deflate Compression module registered [ 2.981526] PPP MPPE Compression module registered [ 2.986805] usbcore: registered new interface driver r8152 [ 2.992044] usbcore: registered new interface driver asix [ 2.997648] usbcore: registered new interface driver ax88179_178a [ 3.003761] usbcore: registered new interface driver cdc_ether [ 3.009453] usbcore: registered new interface driver net1080 [ 3.015054] usbcore: registered new interface driver cdc_subset [ 3.021350] usbcore: registered new interface driver zaurus [ 3.026791] usbcore: registered new interface driver cdc_ncm [ 3.032476] usbcore: registered new interface driver aqc111 [ 3.038124] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.044440] ohci-pci: OHCI PCI platform driver [ 3.048480] ohci-platform: OHCI generic platform driver [ 3.054397] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.060926] usbcore: registered new interface driver uas [ 3.065080] usbcore: registered new interface driver usb-storage [ 3.071215] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.076853] mousedev: PS/2 mouse device common for all mice [ 3.082183] usbcore: registered new interface driver xpad [ 3.089940] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.092947] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.100719] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.107268] i2c /dev entries driver [ 3.110628] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.116395] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.121596] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.126890] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.132438] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.137751] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.143100] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.156841] device-mapper: uevent: version 1.0.3 [ 3.157313] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.163943] cpuidle: Initializing cpuidle driver [ 3.167806] sdhci: Secure Digital Host Controller Interface driver [ 3.172265] sdhci: Copyright(c) Pierre Ossman [ 3.176375] Synopsys Designware Multimedia Card Interface Driver [ 3.182868] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.188762] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.189381] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.202009] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.220247] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.229006] vdd-1v0: supplied by regulator-dummy [ 3.234353] vdd-1v8-hs: supplied by regulator-dummy [ 3.239164] vdd-1v8-ls: supplied by regulator-dummy [ 3.243961] vdd-1v8-ao: supplied by regulator-dummy [ 3.247715] vddio-ddr-1v1: supplied by regulator-dummy [ 3.252026] vdd-rtc: supplied by regulator-dummy [ 3.253588] spmic-ldo1: supplied by regulator-dummy [ 3.254854] vdd-ao-3v3: supplied by regulator-dummy [ 3.261018] vddio-emmc-3v3: supplied by regulator-dummy [ 3.267120] spmic-ldo4: supplied by regulator-dummy [ 3.268283] vdd-usb-3v3: supplied by regulator-dummy [ 3.274325] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.280333] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.285728] spmic-ldo8: supplied by vdd-1v8-ls [ 3.287026] gpio-510 (gpio_default): hogged as output/high [ 3.288821] gpio-511 (gpio_default): hogged as output/high [ 3.295690] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.434405] max77686-rtc max77620-rtc: registered as rtc0 [ 3.435631] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.435936] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.156897] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.157825] hid: raw HID events driver (C) Jiri Kosina [ 4.158442] usbcore: registered new interface driver usbhid [ 4.158603] usbhid: USB HID core driver [ 4.160245] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.161446] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.256498] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.332238] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.550 ms) ÿá[ 4.246810] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.247320] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.248329] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.249138] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.250761] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.251401] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.252019] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.253197] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.253536] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.255349] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.262721] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.269639] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.274444] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.280741] denver_knobs_init:MTS_VERSION:55637613 [ 4.293625] t19x_cache tegra-cache: probed [ 4.297798] optee: probing for conduit method. [ 4.298738] optee: revision 3.16 (65cc2218) [ 4.299791] optee: dynamic shared memory is enabled [ 4.302093] optee: initialized driver [ 4.308637] nvpmodel: initialized successfully [ 4.309492] tegra_hv: get_hvd: not initialized yet [ 4.314279] user_ivc_mempool: hypervisor not present [ 4.319944] usbcore: registered new interface driver snd-usb-audio [ 4.326438] u32 classifier [ 4.327777] input device check on [ 4.331429] Actions configured [ 4.335457] Initializing XFRM netlink socket [ 4.340294] NET: Registered protocol family 10 [ 4.346500] Segment Routing with IPv6 [ 4.347664] NET: Registered protocol family 17 [ 4.351640] NET: Registered protocol family 15 [ 4.356724] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.370000] Bluetooth: RFCOMM socket layer initialized [ 4.374316] Bluetooth: RFCOMM ver 1.11 [ 4.378461] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.384054] Bluetooth: HIDP socket layer initialized [ 4.390344] 9pnet: Installing 9P2000 support [ 4.393598] Key type dns_resolver registered [ 4.399321] registered taskstats version 1 [ 4.401931] Loading compiled-in X.509 certificates [ 4.415153] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.417935] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.427852] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.430087] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.438460] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.447044] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.563720] tegra194-pcie 14160000.pcie: Link up [ 4.566554] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.566788] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.566970] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.567360] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.567705] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.568208] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.568752] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.582447] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.582908] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.583371] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.585025] pci 0004:01:00.0: supports D1 D2 [ 4.585250] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.597442] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.597867] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.598221] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.598823] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.599125] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.599330] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.599821] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.605741] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.614493] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.624731] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.629229] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.635054] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.641722] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.651144] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.652429] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.660672] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.669382] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.784426] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.785342] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.785691] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.785869] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.786185] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.786436] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.786826] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.787316] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.808772] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.809381] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.811861] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.813235] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.815049] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.816937] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.818278] pci 0005:00:00.0: Removing from iommu group 7 [ 5.818720] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.859005] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.883129] host1x 13e10000.host1x: initialized [ 5.884906] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.885974] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.887015] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.887825] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.888843] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.889412] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.890398] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.891044] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.892026] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.892624] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.894366] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.901686] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.911665] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.918359] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.928179] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.935250] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.945465] falcon 15340000.vic: Adding to iommu group 17 [ 5.959764] falcon 15340000.vic: initialized [ 5.960733] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.966683] falcon 15380000.nvjpg: initialized [ 5.967224] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.978056] falcon 154c0000.nvenc: initialized [ 5.978715] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.988353] falcon 15a80000.nvenc1: initialized [ 5.989156] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.000946] nvdec 15480000.nvdec: initialized [ 6.001578] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.012043] nvdec 15140000.nvdec1: initialized [ 6.012573] tsec 15500000.tsec: Adding to iommu group 18 [ 6.018374] tsec 15500000.tsec: initialized [ 6.018852] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.025902] tsec 15100000.tsecb: initialized [ 6.029852] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.059166] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.073242] gpio-374 (wifi-enable): hogged as output/high [ 6.073499] gpio-431 (camera-control-output-low): hogged as output/low [ 6.073839] gpio-432 (camera-control-output-low): hogged as output/low [ 6.075459] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.077621] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.078256] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.079817] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.081764] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.088056] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.093226] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.101482] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.109527] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.121045] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.125518] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.131460] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.140596] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.149691] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.157195] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.164506] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.170884] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.180228] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.186512] pva 16000000.pva0: Adding to iommu group 22 [ 6.215472] pva 16000000.pva0: initialized [ 6.221018] pva 16800000.pva1: Adding to iommu group 23 [ 6.232430] pva 16800000.pva1: initialized [ 6.237270] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.250520] nvdla 15880000.nvdla0: initialized [ 6.251956] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.268557] nvdla 158c0000.nvdla1: initialized [ 6.272481] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.272672] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.272862] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.273330] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.273698] tegradccommon 15200000.display-hub: dma mapping done [ 6.273784] tegradc 15200000.display: Adding to iommu group 26 [ 6.275252] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.276559] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.276840] tegra_cec 3960000.tegra_cec: probed [ 6.281816] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.282210] tegradc 15210000.display: Adding to iommu group 26 [ 6.282233] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.282460] generic_infoframe_type: 0x87 [ 6.282553] tegradc 15200000.display: DT parsed successfully [ 6.282626] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.286150] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.286610] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.294330] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.298796] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.298803] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.299667] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.302990] kfuse 3830000.kfuse: initialized [ 6.308075] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.309394] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.317105] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.327213] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.330679] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.331370] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.338342] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.359768] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.365988] tegradc 15210000.display: disp0 connected to head1->sor [ 6.372278] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.381476] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.388588] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.394430] tegradc 15210000.display: DT parsed successfully [ 6.402496] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.406710] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.455547] random: crng init done [ 6.474338] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.495316] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.495966] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.497683] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.505950] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.514910] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.521224] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.528928] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.536035] usb usb1: Product: xHCI Host Controller [ 6.541144] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.547439] usb usb1: SerialNumber: 3610000.xhci [ 6.552889] hub 1-0:1.0: USB hub found [ 6.556067] hub 1-0:1.0: 4 ports detected [ 6.560729] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.565416] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.572768] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.580411] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.588584] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.595851] usb usb2: Product: xHCI Host Controller [ 6.600576] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.606818] usb usb2: SerialNumber: 3610000.xhci [ 6.612166] hub 2-0:1.0: USB hub found [ 6.615454] hub 2-0:1.0: 4 ports detected [ 6.657982] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.664251] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.665681] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.665957] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.679389] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.680584] tegra194-cpufreq ccplex: probed with BWMGR [ 6.681954] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.682469] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.682885] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.684237] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.689647] tegra194-vi5 15c10000.vi: initialized [ 6.691232] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.692541] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.695801] generic_infoframe_type: 0x87 [ 6.702164] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.705641] tegradc 15200000.display: DT parsed successfully [ 6.713686] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.713694] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.713698] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.713703] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.719343] mmc0: CQHCI version 5.10 [ 6.719631] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.719638] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.719643] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.726116] tegradc 15200000.display: Display dc.00000000397bf123 registered with id=0 [ 6.778472] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.779043] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.792212] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.792869] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.792877] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.809412] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.817016] nvethernet 2490000.ethernet: Macsec not supported [ 6.818310] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.823193] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.830227] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.831635] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.837349] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.843331] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.873971] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.874764] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.881784] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.888289] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.903659] tegra-se-nvhost 15810000.se: initialized [ 6.905068] tegradc 15200000.display: probed [ 6.916125] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.917865] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.924867] tegra-se-nvhost 15820000.se: initialized [ 6.931151] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.935452] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.937500] mmc0: Command Queue Engine enabled [ 6.941884] tegra-se-nvhost 15830000.se: initialized [ 6.945585] mmc0: periodic cache flush enabled [ 6.951844] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.954693] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.961315] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.968231] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.978324] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.978607] Console: switching to colour frame buffer device 240x67 [ 6.978692] tegra-se-nvhost 15840000.se: initialized [ 6.980393] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.985331] tegradc 15200000.display: fb registered [ 6.992923] tegra_actmon d230000.actmon: in actmon_register()... [ 6.996750] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.007380] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.014516] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.024913] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.030899] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.037659] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.039215] hvc_sysfs: hypervisor is not present [ 7.046754] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.065694] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.072638] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.077504] usb 1-2: Manufacturer: Generic [ 7.080771] ALSA device list: [ 7.083870] hub 1-2:1.0: USB hub found [ 7.084602] No soundcards found. [ 7.089707] hub 1-2:1.0: 4 ports detected [ 7.098707] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.106119] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.113128] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.121547] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.128253] Extcon AUX1(HDMI) enable [ 7.131794] tegradc 15210000.display: disp1 connected to head1->sor [ 7.137957] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.144969] tegradc 15210000.display: DT parsed successfully [ 7.150600] tegradc 15210000.display: Display dc.000000001cd89ba0 registered with id=1 [ 7.158731] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.164484] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.172519] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.177615] tegradc 15210000.display: probed [ 7.183196] tegradc 15210000.display: fb registered [ 7.191222] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.194851] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.196932] Freeing unused kernel memory: 3968K [ 7.202919] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.212876] tegradc 15210000.display: blank - powerdown [ 7.213512] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.218047] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.226268] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.226472] Run /init as init process [ 7.234754] Extcon DP: HPD disabled [ 7.242002] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.242009] usb 2-3: Manufacturer: Generic [ 7.245680] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.245692] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.259409] hub 2-3:1.0: USB hub found [ 7.264410] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.281727] tegradc 15200000.display: blank - powerdown [ 7.283498] hub 2-3:1.0: 4 ports detected [ 7.299638] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.315752] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.315756] Extcon AUX1(HDMI) disable [ 7.339201] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.339638] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.340069] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.347229] Root device found: mmcblk0p1 [ 7.349316] Found dev node: /dev/mmcblk0p1 [ 7.353699] tegradc 15200000.display: unblank [ 7.354799] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.355305] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.362503] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.364186] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.364215] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.364372] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.368420] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.368423] Extcon AUX1(HDMI) enable [ 7.381163] tegradc 15200000.display: sync windows ret = 247 [ 7.386685] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.415717] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.419792] Rootfs mounted over mmcblk0p1 [ 7.421161] Extcon HDMI: HPD enabled [ 7.429287] tegradc 15200000.display: hdmi: plugged [ 7.461906] Switching from initrd to actual rootfs [ 7.488736] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.490259] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.491667] usb 1-3: Product: Bluetooth Radio [ 7.493006] usb 1-3: Manufacturer: Realtek [ 7.494339] usb 1-3: SerialNumber: 00e04c000001 [ 7.623515] systemd[1]: System time before build time, advancing clock. [ 7.693786] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.698751] systemd[1]: Detected architecture arm64. [ 7.745885] systemd[1]: Set hostname to . [ 7.912305] systemd-sysv-generator[254]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.250664] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.252450] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.257920] systemd[1]: Created slice system-modprobe.slice. [ 8.262771] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.266951] systemd[1]: Created slice User and Session Slice. [ 8.270501] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.274664] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.278286] systemd[1]: Reached target User and Group Name Lookups. [ 8.281646] systemd[1]: Reached target Slices. [ 8.284874] systemd[1]: Reached target Swap. [ 8.289173] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.293167] systemd[1]: Listening on Syslog Socket. [ 8.296960] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.300563] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.305027] systemd[1]: Listening on Journal Audit Socket. [ 8.311163] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.317566] systemd[1]: Listening on Journal Socket. [ 8.322685] systemd[1]: Listening on udev Control Socket. [ 8.326249] systemd[1]: Listening on udev Kernel Socket. [ 8.334638] systemd[1]: Mounting Huge Pages File System... [ 8.343025] systemd[1]: Mounting POSIX Message Queue File System... [ 8.350857] systemd[1]: Mounting RPC Pipe File System... [ 8.359258] systemd[1]: Mounting Kernel Debug File System... [ 8.367775] systemd[1]: Mounting Kernel Trace File System... [ 8.377746] systemd[1]: Starting Journal Service... [ 8.386997] systemd[1]: Starting Set the console keyboard layout... [ 8.395303] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.398989] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.405418] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.413589] systemd[1]: Started Nameserver information manager. [ 8.418368] systemd[1]: Reached target Network (Pre). [ 8.425756] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.427668] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.435513] systemd[1]: Starting Load Kernel Modules... [ 8.443251] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.452466] systemd[1]: Starting udev Coldplug all Devices... [ 8.462391] systemd[1]: Mounted Huge Pages File System. [ 8.466348] systemd[1]: Mounted POSIX Message Queue File System. [ 8.471314] systemd[1]: Mounted RPC Pipe File System. [ 8.472673] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.477711] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.479920] systemd[1]: Mounted Kernel Debug File System. [ 8.479983] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.483199] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.483214] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.483218] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.483459] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.483755] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.483921] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.483927] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.496740] systemd[1]: Mounted Kernel Trace File System. [ 8.503134] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.508216] systemd[1]: nvfb-udev.service: Succeeded. [ 8.512372] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.522698] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.528223] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.530037] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.542169] systemd[1]: Starting Load/Save Random Seed... [ 8.551124] systemd[1]: Starting Create System Users... [ 8.598941] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.598941] [ 8.613110] systemd[1]: Finished Create System Users. [ 8.620935] systemd[1]: Finished Load/Save Random Seed. [ 8.634746] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.644278] systemd[1]: Finished Set the console keyboard layout. [ 8.651148] systemd[1]: Finished Load Kernel Modules. [ 8.657105] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.665237] systemd[1]: Mounting Kernel Configuration File System... [ 8.673097] systemd[1]: Started OP-TEE Client Supplicant. [ 8.681142] systemd[1]: Starting Apply Kernel Variables... [ 8.690912] systemd[1]: Mounted Kernel Configuration File System. [ 8.703288] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.707332] systemd[1]: Reached target Local File Systems (Pre). [ 8.710659] systemd[1]: Reached target Local File Systems. [ 8.714038] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 10.268618] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.275428] imx219 9-0010: board setup failed [ 10.277176] imx219: probe of 9-0010 failed with error -121 [ 10.295123] hot-surface-alert cooling state: 0 -> 1 [ 10.301576] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.311822] imx219 10-0010: board setup failed [ 10.315769] imx219: probe of 10-0010 failed with error -121 [ 11.255819] using random self ethernet address [ 11.257531] using random host ethernet address [ 11.756642] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.758385] Creating 1 MTD partitions on "spi6.0": [ 11.758406] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.523046] using random self ethernet address [ 12.524723] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.802319] nvidia: loading out-of-tree module taints kernel. [ 59.967335] watchdog: watchdog0: watchdog did not stop! [ 60.436732] Trying to unregister non-registered hwtime source [ 63.503858] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.505454] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug 11 ÿâclk_dt_late initialized ÿä0ÿânoc_late initialized ÿä3ÿâpm_post initialized dbells initialized ÿä:23ÿâdmce initialized cvc initialized ÿä:20 UTC 2022 ÿâavfs_clk_mach_post initialized ÿäaarcÿâavfs_clk_platform_post initialized ÿäh6ÿâcvc_late initialized regulator_post initialized ÿä4 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿäI/TC: WARNING: This OP-TEE configuration miÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized entering main console loop ] bpmp: init complete ÿäght be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.420] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.483] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.486] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.597] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.606] I> retrieved tmds range from prod_list_hdmi_soc [0003.611] E> invalid display type [0003.612] E> cannot find any other nvdisp nodes [0003.628] I> edid read success [0003.640] I> edid read success [0003.640] I> width = 640, height = 480, frequency = 25174825 [0003.641] I> width = 1920, height = 1080, frequency = 148500000 [0003.641] I> width = 1280, height = 768, frequency = 79500000 [0003.642] I> width = 1360, height = 768, frequency = 85500000 [0003.642] I> width = 720, height = 480, frequency = 26973026 [0003.646] I> width = 720, height = 576, frequency = 26973026 [0003.651] I> width = 1280, height = 720, frequency = 74175824 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1920, height = 1080, frequency = 148351648 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 720, height = 480, frequency = 26973026 [0003.680] I> width = 720, height = 576, frequency = 26973026 [0003.685] I> width = 3840, height = 2160, frequency = 296703296 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 4096, height = 2160, frequency = 296703296 [0003.714] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.725] I> hdmi_enable, starting HDMI initialisation [0003.730] I> hdmi_enable, HDMI initialisation complete [0003.739] initializing target [0003.740] calling apps_init() [0003.741] starting app kernel_boot_app [0003.742] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000788] Console: colour dummy device 80x25 [ 0.002335] printk: console [tty0] enabled [ 0.002401] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002439] pid_max: default: 32768 minimum: 301 [ 0.002740] LSM: Security Framework initializing [ 0.002825] Yama: becoming mindful. [ 0.002869] SELinux: Initializing. [ 0.003048] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003099] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006223] rcu: Hierarchical SRCU implementation. [ 0.006481] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007202] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007262] DTB Build time: Aug 10 2022 20:31:49 [ 0.010145] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010424] Remapping and enabling EFI services. [ 0.012417] smp: Bringing up secondary CPUs ... [ 0.041614] Detected PIPT I-cache on CPU1 [ 0.041673] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071539] Detected PIPT I-cache on CPU2 [ 0.071615] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101263] Detected PIPT I-cache on CPU3 [ 0.101332] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131014] Detected PIPT I-cache on CPU4 [ 0.131115] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160869] Detected PIPT I-cache on CPU5 [ 0.160940] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161243] smp: Brought up 1 node, 6 CPUs [ 0.161482] SMP: Total of 6 processors activated. [ 0.161526] CPU features: detected: Privileged Access Never [ 0.161548] CPU features: detected: LSE atomic instructions [ 0.161562] CPU features: detected: User Access Override [ 0.161575] CPU features: detected: 32-bit EL0 Support [ 0.161606] CPU features: detected: RAS Extension Support [ 0.161618] CPU features: detected: CRC32 instructions [ 0.161631] CPU features: detected: 32-bit EL1 Support [ 0.227455] CPU: All CPU(s) started at EL2 [ 0.232465] devtmpfs: initialized [ 0.284173] Registered cp15_barrier emulation handler [ 0.284305] Registered setend emulation handler [ 0.284327] KASLR enabled [ 0.284601] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.284623] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286471] pinctrl core: initialized pinctrl subsystem [ 0.287512] SMBIOS 3.0.0 present. [ 0.287561] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288179] NET: Registered protocol family 16 [ 0.289981] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.290481] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291206] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291267] audit: initializing netlink subsys (disabled) [ 0.291576] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.291966] thermal_sys: Registered thermal governor 'step_wise' [ 0.291972] thermal_sys: Registered thermal governor 'power_allocator' [ 0.291987] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294077] cpuidle: using governor menu [ 0.294324] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.294721] ASID allocator initialised with 32768 entries [ 0.294990] Serial: AMBA PL011 UART driver [ 0.298100] Tegra reboot handler registered. [ 0.365516] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.365689] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.365864] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.365930] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.366069] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.366132] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.366246] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.366290] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.366410] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.366454] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.368535] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.368575] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.368611] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.368668] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.368725] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.368754] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.368799] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.368837] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.368867] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.368915] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.368945] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.368975] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.369003] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.369029] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.369056] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.369083] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.369116] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.369217] mc-err: mcerr ops are set to t19x [ 0.380870] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.380891] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.380903] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.380915] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.388479] ACPI: Interpreter disabled. [ 0.389691] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.390985] iommu: Default domain type: Translated [ 0.391056] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.391426] SCSI subsystem initialized [ 0.391615] usbcore: registered new interface driver usbfs [ 0.391658] usbcore: registered new interface driver hub [ 0.391691] usbcore: registered new device driver usb [ 0.392037] mc: Linux media interface: v0.10 [ 0.392063] videodev: Linux video capture interface: v2.00 [ 0.392337] pps_core: LinuxPPS API ver. 1 registered [ 0.392349] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.392369] PTP clock support registered [ 0.392584] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.392833] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.392912] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.393437] Registered efivars operations [ 0.398890] FPGA manager framework [ 0.399037] Advanced Linux Sound Architecture Driver Initialized. [ 0.399676] Bluetooth: Core ver 2.22 [ 0.399715] NET: Registered protocol family 31 [ 0.399746] Bluetooth: HCI device and connection manager initialized [ 0.399762] Bluetooth: HCI socket layer initialized [ 0.399777] Bluetooth: L2CAP socket layer initialized [ 0.399800] Bluetooth: SCO socket layer initialized [ 0.401313] camchar: rtcpu character device driver loaded [ 0.402038] clocksource: Switched to clocksource arch_sys_counter [ 0.811286] VFS: Disk quotas dquot_6.6.0 [ 0.811442] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.811916] pnp: PnP ACPI: disabled [ 0.826342] la/ptsa driver initialized. [ 0.826547] NET: Registered protocol family 2 [ 0.826750] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.834354] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.834545] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.834926] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.835561] TCP: Hash tables configured (established 65536 bind 65536) [ 0.835719] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.835867] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.836167] NET: Registered protocol family 1 [ 0.836910] RPC: Registered named UNIX socket transport module. [ 0.836968] RPC: Registered udp transport module. [ 0.836987] RPC: Registered tcp transport module. [ 0.837004] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.837058] PCI: CLS 0 bytes, default 64 [ 0.837359] Trying to unpack rootfs image as initramfs... [ 1.104618] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.107870] Freeing initrd memory: 8196K [ 1.111880] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.111917] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.111972] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.112250] kvm [1]: IPA Size Limit: 40 bits [ 1.112693] kvm [1]: vgic interrupt IRQ9 [ 1.113160] kvm [1]: VHE mode initialized successfully [ 1.114575] Initialise system trusted keyrings [ 1.114920] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.121844] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.122722] NFS: Registering the id_resolver key type [ 1.122761] Key type id_resolver registered [ 1.122808] Key type id_legacy registered [ 1.122902] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.122955] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.122998] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.132464] NET: Registered protocol family 38 [ 1.132491] Key type asymmetric registered [ 1.132508] Asymmetric key parser 'x509' registered [ 1.132601] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.132901] io scheduler mq-deadline registered [ 1.132923] io scheduler kyber registered [ 1.138586] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.141487] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.141594] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.141699] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.141775] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.141848] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.147170] scrncapt: init (heads:4 wins:6 planes:4) [ 1.147460] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.148308] EINJ: ACPI disabled. [ 1.151738] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.151796] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.151815] tegra-pmc: ### PMC reset level: L1 [ 1.151840] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.151906] tegra-pmc: PMC Prod config success [ 1.157058] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.162808] random: fast init done [ 1.162928] printk: console [ttyTCU0] enabled [ 2.714735] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.719330] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.723922] arm-smmu 10000000.iommu: stage 1 translation [ 2.729280] arm-smmu 10000000.iommu: stage 2 translation [ 2.734639] arm-smmu 10000000.iommu: nested translation [ 2.739974] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.747150] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.757811] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.760288] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.767094] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.774680] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.779873] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.784856] arm-smmu 12000000.iommu: stage 1 translation [ 2.790366] arm-smmu 12000000.iommu: stage 2 translation [ 2.795788] arm-smmu 12000000.iommu: nested translation [ 2.800959] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.808141] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.818217] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.821236] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.828077] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.835212] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.845317] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.848264] tegra_profiler: auth: init [ 2.852525] THERMAL EST: found 3 subdevs [ 2.855915] THERMAL EST num_resources: 0 [ 2.860014] [THERMAL EST subdev 0] [ 2.863341] [THERMAL EST subdev 1] [ 2.866498] [THERMAL EST subdev 2] [ 2.870016] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.876245] THERMAL EST: thz register success. [ 2.880696] THERMAL EST: end of probe, return err: 0 [ 2.886107] nvsciipc: loaded module [ 2.893041] tun: Universal TUN/TAP device driver, 1.6 [ 2.895303] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.901513] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.907325] e1000e: Intel(R) PRO/1000 Network Driver [ 2.912251] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.918095] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.923627] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.929806] PPP generic driver version 2.4.2 [ 2.934135] PPP BSD Compression module registered [ 2.938376] PPP Deflate Compression module registered [ 2.943592] PPP MPPE Compression module registered [ 2.948886] usbcore: registered new interface driver r8152 [ 2.954120] usbcore: registered new interface driver asix [ 2.959709] usbcore: registered new interface driver ax88179_178a [ 2.965569] usbcore: registered new interface driver cdc_ether [ 2.971523] usbcore: registered new interface driver net1080 [ 2.977376] usbcore: registered new interface driver cdc_subset [ 2.983167] usbcore: registered new interface driver zaurus [ 2.988855] usbcore: registered new interface driver cdc_ncm [ 2.994805] usbcore: registered new interface driver aqc111 [ 3.000490] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.006506] ohci-pci: OHCI PCI platform driver [ 3.010579] ohci-platform: OHCI generic platform driver [ 3.016634] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.022813] usbcore: registered new interface driver uas [ 3.026845] usbcore: registered new interface driver usb-storage [ 3.032996] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.039037] mousedev: PS/2 mouse device common for all mice [ 3.044282] usbcore: registered new interface driver xpad [ 3.051911] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.054752] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.062777] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.069126] i2c /dev entries driver [ 3.072412] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.078181] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.083805] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.089173] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.094488] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.100020] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.105432] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.118642] device-mapper: uevent: version 1.0.3 [ 3.119086] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.125880] cpuidle: Initializing cpuidle driver [ 3.129796] sdhci: Secure Digital Host Controller Interface driver [ 3.134348] sdhci: Copyright(c) Pierre Ossman [ 3.138446] Synopsys Designware Multimedia Card Interface Driver [ 3.144892] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.150622] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.151396] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.164323] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.186427] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.196278] vdd-1v0: supplied by regulator-dummy [ 3.201777] vdd-1v8-hs: supplied by regulator-dummy [ 3.206672] vdd-1v8-ls: supplied by regulator-dummy [ 3.211490] vdd-1v8-ao: supplied by regulator-dummy [ 3.215476] vddio-ddr-1v1: supplied by regulator-dummy [ 3.220083] vdd-rtc: supplied by regulator-dummy [ 3.221822] spmic-ldo1: supplied by regulator-dummy [ 3.223108] vdd-ao-3v3: supplied by regulator-dummy [ 3.229261] vddio-emmc-3v3: supplied by regulator-dummy [ 3.235554] spmic-ldo4: supplied by regulator-dummy [ 3.236826] vdd-usb-3v3: supplied by regulator-dummy [ 3.243123] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.249293] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.254895] spmic-ldo8: supplied by vdd-1v8-ls [ 3.256330] gpio-510 (gpio_default): hogged as output/high [ 3.257676] gpio-511 (gpio_default): hogged as output/high [ 3.260631] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.396574] max77686-rtc max77620-rtc: registered as rtc0 [ 3.397634] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.397960] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.224983] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.226244] hid: raw HID events driver (C) Jiri Kosina [ 4.226899] usbcore: registered new interface driver usbhid [ 4.227041] usbhid: USB HID core driver [ 4.228799] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.229953] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.395438] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.470552] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.924 ms) ÿá[ 4.314990] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.315739] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.316981] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.317891] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.319904] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.320563] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.321210] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.322691] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.323056] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.325102] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.331703] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.337620] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.343330] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.349412] denver_knobs_init:MTS_VERSION:55637613 [ 4.362217] t19x_cache tegra-cache: probed [ 4.365017] optee: probing for conduit method. [ 4.365928] optee: revision 3.16 (65cc2218) [ 4.367155] optee: dynamic shared memory is enabled [ 4.369787] optee: initialized driver [ 4.376561] nvpmodel: initialized successfully [ 4.377294] tegra_hv: get_hvd: not initialized yet [ 4.382497] user_ivc_mempool: hypervisor not present [ 4.388841] usbcore: registered new interface driver snd-usb-audio [ 4.394808] u32 classifier [ 4.396107] input device check on [ 4.399943] Actions configured [ 4.403159] Initializing XFRM netlink socket [ 4.408189] NET: Registered protocol family 10 [ 4.415322] Segment Routing with IPv6 [ 4.415699] NET: Registered protocol family 17 [ 4.419780] NET: Registered protocol family 15 [ 4.424449] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.437839] Bluetooth: RFCOMM socket layer initialized [ 4.442685] Bluetooth: RFCOMM ver 1.11 [ 4.446308] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.452459] Bluetooth: HIDP socket layer initialized [ 4.458088] 9pnet: Installing 9P2000 support [ 4.461799] Key type dns_resolver registered [ 4.467247] registered taskstats version 1 [ 4.470068] Loading compiled-in X.509 certificates [ 4.483372] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.486429] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.496955] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.498288] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.506621] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.515184] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.630111] tegra194-pcie 14160000.pcie: Link up [ 4.633128] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.633397] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.633627] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.633864] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.634119] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.634553] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.635172] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.652118] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.652584] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.653110] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.654844] pci 0004:01:00.0: supports D1 D2 [ 4.655016] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.667415] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.667863] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.668197] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.668640] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.668920] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.669151] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.669397] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.672465] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.680875] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.691240] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.695804] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.701094] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.708339] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.716838] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.718620] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.727237] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.735486] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.850858] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.851419] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.851603] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.851747] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.852086] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.852298] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.852638] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.853120] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.876546] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.876934] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.879652] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.881033] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.882877] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.884651] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.885720] pci 0005:00:00.0: Removing from iommu group 7 [ 5.886231] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.922724] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.951134] host1x 13e10000.host1x: initialized [ 5.953164] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.954537] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.956420] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.957519] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.958792] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.959449] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.960570] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.961127] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.962141] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.962750] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.963648] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.967739] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.977784] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.984984] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.994866] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.001738] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.011548] falcon 15340000.vic: Adding to iommu group 17 [ 6.026217] falcon 15340000.vic: initialized [ 6.027280] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.033797] falcon 15380000.nvjpg: initialized [ 6.034888] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.045196] falcon 154c0000.nvenc: initialized [ 6.045917] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.055215] falcon 15a80000.nvenc1: initialized [ 6.055801] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.067127] nvdec 15480000.nvdec: initialized [ 6.067715] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.077293] nvdec 15140000.nvdec1: initialized [ 6.077843] tsec 15500000.tsec: Adding to iommu group 18 [ 6.083780] tsec 15500000.tsec: initialized [ 6.084335] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.092587] tsec 15100000.tsecb: initialized [ 6.097287] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.125033] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.137205] gpio-374 (wifi-enable): hogged as output/high [ 6.137494] gpio-431 (camera-control-output-low): hogged as output/low [ 6.137792] gpio-432 (camera-control-output-low): hogged as output/low [ 6.139856] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.141865] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.142539] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.144072] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.148431] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.154306] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.159964] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.168391] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.175600] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.186957] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.192000] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.197903] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.206717] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.216155] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.223459] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.231068] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.237029] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.247025] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.252895] pva 16000000.pva0: Adding to iommu group 22 [ 6.280536] pva 16000000.pva0: initialized [ 6.284468] pva 16800000.pva1: Adding to iommu group 23 [ 6.294907] pva 16800000.pva1: initialized [ 6.298640] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.312363] nvdla 15880000.nvdla0: initialized [ 6.313633] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.322533] nvdla 158c0000.nvdla1: initialized [ 6.324936] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.325206] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.325586] tegradccommon 15200000.display-hub: dma mapping done [ 6.327750] tegradc 15200000.display: Adding to iommu group 26 [ 6.336763] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.337131] generic_infoframe_type: 0x87 [ 6.337377] tegradc 15200000.display: DT parsed successfully [ 6.337720] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.343463] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.345172] tegradc 15210000.display: Adding to iommu group 26 [ 6.347892] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.347905] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.347911] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.349097] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.349113] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.349407] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.350830] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.356075] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.371832] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.381126] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.386162] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.393708] tegradc 15210000.display: disp0 connected to head1->sor [ 6.397444] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.408623] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.415274] tegra_cec 3960000.tegra_cec: probed [ 6.416163] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.421224] tegradc 15210000.display: DT parsed successfully [ 6.436135] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.440457] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.446367] kfuse 3830000.kfuse: initialized [ 6.489241] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.494683] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.501600] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.508222] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.517510] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.523069] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.531790] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.537644] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.558132] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.558542] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.558610] random: crng init done [ 6.560655] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.572519] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.580996] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.587830] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.595133] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.602542] usb usb1: Product: xHCI Host Controller [ 6.607257] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.613380] usb usb1: SerialNumber: 3610000.xhci [ 6.619310] hub 1-0:1.0: USB hub found [ 6.621915] hub 1-0:1.0: 4 ports detected [ 6.626933] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.631531] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.639390] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.647186] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.654745] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.662204] usb usb2: Product: xHCI Host Controller [ 6.666930] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.673150] usb usb2: SerialNumber: 3610000.xhci [ 6.678568] hub 2-0:1.0: USB hub found [ 6.681575] hub 2-0:1.0: 4 ports detected [ 6.725314] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.731295] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.732840] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.732986] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.746344] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.747450] tegra194-cpufreq ccplex: probed with BWMGR [ 6.748668] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.749165] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.749568] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.750974] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.758437] tegra194-vi5 15c10000.vi: initialized [ 6.759655] tegradc 15210000.display: disp0 connected to head1->sor [ 6.761794] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.763200] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.769084] mmc0: CQHCI version 5.10 [ 6.769159] tegradc 15210000.display: DT parsed successfully [ 6.769165] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.769865] tegradc 15210000.display: disp0 connected to head1->sor [ 6.769935] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.770007] tegradc 15210000.display: DT parsed successfully [ 6.770012] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.775165] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.775419] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.775425] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.775432] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.775436] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.775440] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.782087] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.784422] generic_infoframe_type: 0x87 [ 6.792428] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.792440] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.798564] tegradc 15200000.display: DT parsed successfully [ 6.807117] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.811261] tegradc 15200000.display: Display dc.00000000ced178db registered with id=0 [ 6.812975] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.826654] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.840345] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.840349] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.840723] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.847159] nvethernet 2490000.ethernet: Macsec not supported [ 6.848460] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.853636] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.853803] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.861547] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.886054] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.890048] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.898364] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.905706] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.913176] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.922819] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.940405] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 7.026606] ************************************** [ 7.031505] CPU:0, Error:cbb-noc [ 7.034932] Error Logger : 0 [ 7.038072] ErrLog0 : 0x80030000 [ 7.041396] Transaction Type : RD - Read, Incrementing [ 7.047166] Error Code : SLV [ 7.050579] Error Source : Target [ 7.053909] Error Description : Target error detected by CBB slave [ 7.060649] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 7.068262] Packet header Lock : 0 [ 7.071929] Packet header Len1 : 3 [ 7.075258] NOC protocol version : version >= 2.7 [ 7.080246] ErrLog1 : 0x35242c [ 7.083828] ErrLog2 : 0x0 [ 7.086458] RouteId : 0x35242c [ 7.089696] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 7.094683] Targflow : host1x_p2pm/T/host1x_p2pm [ 7.099530] TargSubRange : 18 [ 7.102732] SeqId : 0 [ 7.105793] ErrLog3 : 0x4045c [ 7.109029] ErrLog4 : 0x0 [ 7.111918] Address accessed : 0x15b4045c [ 7.116203] ErrLog5 : 0xb09f851 [ 7.119618] Non-Modify : 0x1 [ 7.122772] AXI ID : 0x16 [ 7.126178] Master ID : CCPLEX [ 7.129247] Security Group(GRPSEC): 0x7e [ 7.133448] Cache : 0x1 -- Bufferable [ 7.137648] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.144729] FALCONSEC : 0x0 [ 7.147621] Virtual Queuing Channel(VQC): 0x0 [ 7.152517] ************************************** [ 7.157559] ------------[ cut here ]------------ [ 7.161798] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.168619] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.173869] Modules linked in: [ 7.176850] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 7.183235] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.195743] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.201531] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.206248] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.211229] sp : ffff800010003de0 [ 7.214648] x29: ffff800010003de0 x28: 0000000000000001 [ 7.220067] x27: 0000000000000005 x26: ffffbe82b7473f58 [ 7.225510] x25: ffffbe82b7dcce10 x24: 0000000000000001 [ 7.230916] x23: ffffbe82b7767000 x22: ffffbe82b7beea00 [ 7.236255] x21: 000000000000000f x20: ffff089e40e66980 [ 7.241766] x19: ffffbe82b7beea00 x18: 0000000000000010 [ 7.246934] x17: 0000000000004000 x16: 00000000b58e3098 [ 7.252272] x15: ffffbe82b7a62bf0 x14: 0720072007200720 [ 7.258041] x13: 0720072007200720 x12: 0720072007200720 [ 7.263553] x11: 0720072007200720 x10: 0720072007200720 [ 7.268809] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.274324] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.280091] x5 : 0000000000057fa8 x4 : ffffbe82b7a77968 [ 7.285277] x3 : 00000000ffffffff x2 : ffffbe82b5f0e090 [ 7.290854] x1 : ffffbe82b7a62680 x0 : 0000000100010001 [ 7.295933] Call trace: [ 7.298389] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.302934] __handle_irq_event_percpu+0x68/0x2a0 [ 7.307482] handle_irq_event_percpu+0x40/0xa0 [ 7.311945] handle_irq_event+0x50/0xf0 [ 7.315705] handle_fasteoi_irq+0xc0/0x170 [ 7.319732] generic_handle_irq+0x40/0x60 [ 7.323756] __handle_domain_irq+0x70/0xd0 [ 7.327701] efi_header_end+0xb0/0xf0 [ 7.331199] el1_irq+0xd0/0x180 [ 7.334175] cpuidle_enter_state+0xb8/0x410 [ 7.338631] cpuidle_enter+0x40/0x60 [ 7.342149] call_cpuidle+0x44/0x80 [ 7.345374] do_idle+0x208/0x270 [ 7.349043] cpu_startup_entry+0x30/0x70 [ 7.352809] rest_init+0xdc/0xe8 [ 7.355791] arch_call_rest_init+0x18/0x20 [ 7.360260] start_kernel+0x514/0x54c [ 7.363581] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.369805] ---[ end trace 2ddebda759c3c3da ]--- [ 7.374504] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.381791] SMP: stopping secondary CPUs [ 7.385898] Kernel Offset: 0x3e82a5d50000 from 0xffff800010000000 [ 7.392003] PHYS_OFFSET: 0xfffff762c0000000 [ 7.395860] CPU features: 0x8240002,03802a30 [ 7.400322] Memory Limit: none [ 7.403494] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.029] > DEVICE_PROD: device prod is not initialized. [0002.335] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.336] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.336] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.337] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.337] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.338] I> dram_block larger than 80000000 [0002.340] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.351] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.355] I> found decompressor handler: lz4 [0002.583] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.585] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized ÿä1ÿânoc_late initialized pm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 aÿâavfs_clk_platform_post initialized ÿäarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.204] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.205] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.206] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.213] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.222] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.253] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.262] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.271] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.280] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.311] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.320] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.329] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.338] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.378] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.387] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.396] GIC-SPI Target CPU: 0 [0003.399] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.429] initializing platform [0003.432] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.444] I> gpio framework initialized [0003.455] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.466] I> fixed regulator driver initialized [0003.484] I> register 'maxim' power off handle [0003.486] I> virtual i2c enabled [0003.486] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.493] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.519] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.530] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.588] I> regulator 'vdd-hdmi-5v0' already enabled [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> hdmi cable connected [0003.600] W> set volts not configured for 'vdd-1v0' [0003.604] W> set volts not configured for 'vdd-1v8-hs' [0003.605] I> retrieved tmds range from prod_list_hdmi_soc [0003.610] E> invalid display type [0003.611] E> cannot find any other nvdisp nodes [0003.627] I> edid read success [0003.640] I> edid read success [0003.640] I> width = 640, height = 480, frequency = 25174825 [0003.640] I> width = 1920, height = 1080, frequency = 148500000 [0003.641] I> width = 1280, height = 768, frequency = 79500000 [0003.641] I> width = 1360, height = 768, frequency = 85500000 [0003.642] I> width = 720, height = 480, frequency = 26973026 [0003.645] I> width = 720, height = 576, frequency = 26973026 [0003.651] I> width = 1280, height = 720, frequency = 74175824 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1920, height = 1080, frequency = 148351648 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 720, height = 480, frequency = 26973026 [0003.679] I> width = 720, height = 576, frequency = 26973026 [0003.685] I> width = 3840, height = 2160, frequency = 296703296 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 4096, height = 2160, frequency = 296703296 [0003.714] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.725] I> hdmi_enable, starting HDMI initialisation [0003.730] I> hdmi_enable, HDMI initialisation complete [0003.739] initializing target [0003.740] calling apps_init() [0003.741] starting app kernel_boot_app [0003.741] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000797] Console: colour dummy device 80x25 [ 0.002312] printk: console [tty0] enabled [ 0.002373] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002407] pid_max: default: 32768 minimum: 301 [ 0.002680] LSM: Security Framework initializing [ 0.002746] Yama: becoming mindful. [ 0.002790] SELinux: Initializing. [ 0.003002] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003040] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006336] rcu: Hierarchical SRCU implementation. [ 0.006610] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007567] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007673] DTB Build time: Aug 10 2022 20:31:49 [ 0.010979] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.011297] Remapping and enabling EFI services. [ 0.013359] smp: Bringing up secondary CPUs ... [ 0.043524] Detected PIPT I-cache on CPU1 [ 0.043618] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.076325] Detected PIPT I-cache on CPU2 [ 0.076467] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105941] Detected PIPT I-cache on CPU3 [ 0.106120] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.136708] Detected PIPT I-cache on CPU4 [ 0.136868] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.166589] Detected PIPT I-cache on CPU5 [ 0.166765] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.167115] smp: Brought up 1 node, 6 CPUs [ 0.167382] SMP: Total of 6 processors activated. [ 0.167434] CPU features: detected: Privileged Access Never [ 0.167455] CPU features: detected: LSE atomic instructions [ 0.167486] CPU features: detected: User Access Override [ 0.167499] CPU features: detected: 32-bit EL0 Support [ 0.167511] CPU features: detected: RAS Extension Support [ 0.167523] CPU features: detected: CRC32 instructions [ 0.167535] CPU features: detected: 32-bit EL1 Support [ 0.235667] CPU: All CPU(s) started at EL2 [ 0.241348] devtmpfs: initialized [ 0.291999] Registered cp15_barrier emulation handler [ 0.292126] Registered setend emulation handler [ 0.292146] KASLR enabled [ 0.292447] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.292473] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.293772] pinctrl core: initialized pinctrl subsystem [ 0.294886] SMBIOS 3.0.0 present. [ 0.294930] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.295583] NET: Registered protocol family 16 [ 0.297402] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.297902] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.298623] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.298683] audit: initializing netlink subsys (disabled) [ 0.298924] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.299393] thermal_sys: Registered thermal governor 'step_wise' [ 0.299399] thermal_sys: Registered thermal governor 'power_allocator' [ 0.299413] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.302570] cpuidle: using governor menu [ 0.302829] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.303275] ASID allocator initialised with 32768 entries [ 0.303537] Serial: AMBA PL011 UART driver [ 0.307357] Tegra reboot handler registered. [ 0.386036] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.386194] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.386385] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.386434] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.386562] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.386610] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.386771] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.386841] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.387002] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.387050] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.389149] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.389185] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.389217] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.389246] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.389277] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.389306] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.389344] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.389377] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.389404] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.389441] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.389468] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.389493] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.389518] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.389544] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.389572] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.389598] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.389624] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.389721] mc-err: mcerr ops are set to t19x [ 0.402027] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.402051] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.402063] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.402093] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.410717] ACPI: Interpreter disabled. [ 0.412429] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.414423] iommu: Default domain type: Translated [ 0.414553] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.415173] SCSI subsystem initialized [ 0.415447] usbcore: registered new interface driver usbfs [ 0.415533] usbcore: registered new interface driver hub [ 0.415582] usbcore: registered new device driver usb [ 0.416187] mc: Linux media interface: v0.10 [ 0.416319] videodev: Linux video capture interface: v2.00 [ 0.416720] pps_core: LinuxPPS API ver. 1 registered [ 0.416761] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.416804] PTP clock support registered [ 0.417125] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.417605] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.417702] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.418634] Registered efivars operations [ 0.428751] FPGA manager framework [ 0.428889] Advanced Linux Sound Architecture Driver Initialized. [ 0.429680] Bluetooth: Core ver 2.22 [ 0.429734] NET: Registered protocol family 31 [ 0.429755] Bluetooth: HCI device and connection manager initialized [ 0.429776] Bluetooth: HCI socket layer initialized [ 0.429795] Bluetooth: L2CAP socket layer initialized [ 0.429825] Bluetooth: SCO socket layer initialized [ 0.432054] camchar: rtcpu character device driver loaded [ 0.433055] clocksource: Switched to clocksource arch_sys_counter [ 0.839893] VFS: Disk quotas dquot_6.6.0 [ 0.839991] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.840406] pnp: PnP ACPI: disabled [ 0.854521] la/ptsa driver initialized. [ 0.854668] NET: Registered protocol family 2 [ 0.854903] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.862524] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.862714] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.863068] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.863697] TCP: Hash tables configured (established 65536 bind 65536) [ 0.863853] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.864002] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.864324] NET: Registered protocol family 1 [ 0.865215] RPC: Registered named UNIX socket transport module. [ 0.865245] RPC: Registered udp transport module. [ 0.865262] RPC: Registered tcp transport module. [ 0.865279] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.865322] PCI: CLS 0 bytes, default 64 [ 0.865587] Trying to unpack rootfs image as initramfs... [ 1.126518] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.129898] Freeing initrd memory: 8196K [ 1.134303] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.134340] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.134375] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.134731] kvm [1]: IPA Size Limit: 40 bits [ 1.135292] kvm [1]: vgic interrupt IRQ9 [ 1.135942] kvm [1]: VHE mode initialized successfully [ 1.137576] Initialise system trusted keyrings [ 1.137930] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.144129] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.145110] NFS: Registering the id_resolver key type [ 1.145153] Key type id_resolver registered [ 1.145168] Key type id_legacy registered [ 1.145252] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.145276] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.145317] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.155224] NET: Registered protocol family 38 [ 1.155250] Key type asymmetric registered [ 1.155265] Asymmetric key parser 'x509' registered [ 1.155342] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.155615] io scheduler mq-deadline registered [ 1.155640] io scheduler kyber registered [ 1.161526] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.164404] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.164503] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.164572] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.164638] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.164708] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.170188] scrncapt: init (heads:4 wins:6 planes:4) [ 1.170214] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.171361] EINJ: ACPI disabled. [ 1.174823] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.174849] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.174895] tegra-pmc: ### PMC reset level: L1 [ 1.174908] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.174970] tegra-pmc: PMC Prod config success [ 1.179878] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.212533] random: fast init done [ 1.219424] printk: console [ttyTCU0] enabled [ 2.737165] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.741626] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.746214] arm-smmu 10000000.iommu: stage 1 translation [ 2.751493] arm-smmu 10000000.iommu: stage 2 translation [ 2.757209] arm-smmu 10000000.iommu: nested translation [ 2.762528] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.769700] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.779997] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.783086] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.789393] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.797526] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.802683] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.807150] arm-smmu 12000000.iommu: stage 1 translation [ 2.812929] arm-smmu 12000000.iommu: stage 2 translation [ 2.818087] arm-smmu 12000000.iommu: nested translation [ 2.823771] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.830959] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.840934] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.843823] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.850633] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.857896] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.867783] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.871048] tegra_profiler: auth: init [ 2.875089] THERMAL EST: found 3 subdevs [ 2.878473] THERMAL EST num_resources: 0 [ 2.882573] [THERMAL EST subdev 0] [ 2.885638] [THERMAL EST subdev 1] [ 2.889307] [THERMAL EST subdev 2] [ 2.892275] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.898716] THERMAL EST: thz register success. [ 2.902997] THERMAL EST: end of probe, return err: 0 [ 2.908520] nvsciipc: loaded module [ 2.915610] tun: Universal TUN/TAP device driver, 1.6 [ 2.917853] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.924311] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.929648] e1000e: Intel(R) PRO/1000 Network Driver [ 2.934807] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.940660] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.946182] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.952351] PPP generic driver version 2.4.2 [ 2.956646] PPP BSD Compression module registered [ 2.961156] PPP Deflate Compression module registered [ 2.966402] PPP MPPE Compression module registered [ 2.971194] usbcore: registered new interface driver r8152 [ 2.976930] usbcore: registered new interface driver asix [ 2.982032] usbcore: registered new interface driver ax88179_178a [ 2.988153] usbcore: registered new interface driver cdc_ether [ 2.994373] usbcore: registered new interface driver net1080 [ 2.999930] usbcore: registered new interface driver cdc_subset [ 3.005721] usbcore: registered new interface driver zaurus [ 3.011421] usbcore: registered new interface driver cdc_ncm [ 3.017093] usbcore: registered new interface driver aqc111 [ 3.022734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.029069] ohci-pci: OHCI PCI platform driver [ 3.033118] ohci-platform: OHCI generic platform driver [ 3.038978] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.045395] usbcore: registered new interface driver uas [ 3.049411] usbcore: registered new interface driver usb-storage [ 3.055874] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.061796] mousedev: PS/2 mouse device common for all mice [ 3.066553] usbcore: registered new interface driver xpad [ 3.074700] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.077554] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 3.085347] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.091946] i2c /dev entries driver [ 3.095249] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.100699] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.106076] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.111727] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.117118] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.122625] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.128027] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.141355] device-mapper: uevent: version 1.0.3 [ 3.141824] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.148209] cpuidle: Initializing cpuidle driver [ 3.152417] sdhci: Secure Digital Host Controller Interface driver [ 3.156912] sdhci: Copyright(c) Pierre Ossman [ 3.161262] Synopsys Designware Multimedia Card Interface Driver [ 3.167205] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.173185] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.173994] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.186447] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.208656] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.218015] vdd-1v0: supplied by regulator-dummy [ 3.223528] vdd-1v8-hs: supplied by regulator-dummy [ 3.228288] vdd-1v8-ls: supplied by regulator-dummy [ 3.233096] vdd-1v8-ao: supplied by regulator-dummy [ 3.236980] vddio-ddr-1v1: supplied by regulator-dummy [ 3.241435] vdd-rtc: supplied by regulator-dummy [ 3.243124] spmic-ldo1: supplied by regulator-dummy [ 3.244349] vdd-ao-3v3: supplied by regulator-dummy [ 3.250510] vddio-emmc-3v3: supplied by regulator-dummy [ 3.256906] spmic-ldo4: supplied by regulator-dummy [ 3.258142] vdd-usb-3v3: supplied by regulator-dummy [ 3.264285] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.270497] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.275983] spmic-ldo8: supplied by vdd-1v8-ls [ 3.277524] gpio-510 (gpio_default): hogged as output/high [ 3.278899] gpio-511 (gpio_default): hogged as output/high [ 3.281778] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.419225] max77686-rtc max77620-rtc: registered as rtc0 [ 3.420554] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.420917] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.250106] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.251342] hid: raw HID events driver (C) Jiri Kosina [ 4.252196] usbcore: registered new interface driver usbhid [ 4.252333] usbhid: USB HID core driver [ 4.254829] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.256120] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.088922] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.162851] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 74.737 ms) ÿá[ 4.340058] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.340674] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.341831] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.342751] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.344571] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.345427] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.346106] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.347627] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.347826] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.350931] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.356832] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.363382] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.368340] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.374606] denver_knobs_init:MTS_VERSION:55637613 [ 4.387504] t19x_cache tegra-cache: probed [ 4.391879] optee: probing for conduit method. [ 4.392744] optee: revision 3.16 (65cc2218) [ 4.393763] optee: dynamic shared memory is enabled [ 4.395107] optee: initialized driver [ 4.402660] nvpmodel: initialized successfully [ 4.403443] tegra_hv: get_hvd: not initialized yet [ 4.407204] user_ivc_mempool: hypervisor not present [ 4.413697] usbcore: registered new interface driver snd-usb-audio [ 4.420017] u32 classifier [ 4.420915] input device check on [ 4.424742] Actions configured [ 4.428559] Initializing XFRM netlink socket [ 4.433502] NET: Registered protocol family 10 [ 4.439846] Segment Routing with IPv6 [ 4.440546] NET: Registered protocol family 17 [ 4.445187] NET: Registered protocol family 15 [ 4.449238] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.462553] Bluetooth: RFCOMM socket layer initialized [ 4.467724] Bluetooth: RFCOMM ver 1.11 [ 4.471365] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.477528] Bluetooth: HIDP socket layer initialized [ 4.482998] 9pnet: Installing 9P2000 support [ 4.486682] Key type dns_resolver registered [ 4.492198] registered taskstats version 1 [ 4.495402] Loading compiled-in X.509 certificates [ 4.507982] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.510943] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.521253] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.523003] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.531885] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.539983] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.657136] tegra194-pcie 14160000.pcie: Link up [ 4.660029] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.660246] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.660484] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.660898] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.661226] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.661801] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.662336] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.675372] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.675878] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.676417] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.678174] pci 0004:01:00.0: supports D1 D2 [ 4.678434] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.690425] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.690760] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.691089] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.691646] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.691982] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.692231] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.692580] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.699443] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.707657] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.717896] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.722471] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.728355] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.735011] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.743952] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.745938] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.754065] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.762800] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.877930] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.878495] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.878677] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.878931] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.879296] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.879573] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.880049] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.880589] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.902146] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.902505] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.904036] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.904999] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.906704] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.908027] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.909188] pci 0005:00:00.0: Removing from iommu group 7 [ 5.909562] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.945970] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.970081] host1x 13e10000.host1x: initialized [ 5.971548] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.972516] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.974068] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.974790] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.976160] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.976739] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.978080] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.978774] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.980093] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.980836] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.988207] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.994704] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.005175] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.011769] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.021973] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.028759] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.038933] falcon 15340000.vic: Adding to iommu group 17 [ 6.053557] falcon 15340000.vic: initialized [ 6.054682] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.060677] falcon 15380000.nvjpg: initialized [ 6.061224] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.072086] falcon 154c0000.nvenc: initialized [ 6.072584] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.081912] falcon 15a80000.nvenc1: initialized [ 6.082850] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.095188] nvdec 15480000.nvdec: initialized [ 6.096002] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.105771] nvdec 15140000.nvdec1: initialized [ 6.106385] tsec 15500000.tsec: Adding to iommu group 18 [ 6.113141] tsec 15500000.tsec: initialized [ 6.113633] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.118866] tsec 15100000.tsecb: initialized [ 6.122717] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.151466] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.163852] gpio-374 (wifi-enable): hogged as output/high [ 6.164144] gpio-431 (camera-control-output-low): hogged as output/low [ 6.164450] gpio-432 (camera-control-output-low): hogged as output/low [ 6.166175] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.167749] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.168217] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.170204] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.175586] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.181388] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.186894] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.195380] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.202455] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.214002] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.218992] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.225167] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.233776] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.243295] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.250088] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.258004] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.264343] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.274070] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.279980] pva 16000000.pva0: Adding to iommu group 22 [ 6.306892] pva 16000000.pva0: initialized [ 6.311761] pva 16800000.pva1: Adding to iommu group 23 [ 6.323660] pva 16800000.pva1: initialized [ 6.327774] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.340382] nvdla 15880000.nvdla0: initialized [ 6.341849] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.350275] nvdla 158c0000.nvdla1: initialized [ 6.354407] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.354469] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.354830] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.354952] tegradc 15200000.display: Adding to iommu group 26 [ 6.355105] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.355149] random: crng init done [ 6.356014] tegradccommon 15200000.display-hub: dma mapping done [ 6.356680] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.362932] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.363723] tegradc 15210000.display: Adding to iommu group 26 [ 6.367868] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.373446] generic_infoframe_type: 0x87 [ 6.379942] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.385590] tegradc 15200000.display: DT parsed successfully [ 6.389184] tegra_cec 3960000.tegra_cec: probed [ 6.394951] tegradc 15200000.display: Display dc.00000000fa9b022a registered with id=0 [ 6.401812] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.413250] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.427533] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.429949] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.435889] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.437125] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.442944] kfuse 3830000.kfuse: initialized [ 6.450581] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.457080] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.462739] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.467046] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.467788] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.477272] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.485231] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.491728] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.499287] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.506581] tegradc 15210000.display: disp0 connected to head1->sor [ 6.526084] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.532595] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.543115] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.548259] tegradc 15210000.display: DT parsed successfully [ 6.559372] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.567354] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.589126] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.589575] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.590865] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.599710] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.607922] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.614936] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.622179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.629462] usb usb1: Product: xHCI Host Controller [ 6.634324] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.640619] usb usb1: SerialNumber: 3610000.xhci [ 6.646503] hub 1-0:1.0: USB hub found [ 6.649292] hub 1-0:1.0: 4 ports detected [ 6.654014] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.658577] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.666446] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.674250] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.681782] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.689085] usb usb2: Product: xHCI Host Controller [ 6.694251] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.700464] usb usb2: SerialNumber: 3610000.xhci [ 6.705599] hub 2-0:1.0: USB hub found [ 6.708643] hub 2-0:1.0: 4 ports detected [ 6.751433] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.758114] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.759949] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.760197] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.773011] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.774113] tegra194-cpufreq ccplex: probed with BWMGR [ 6.775442] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.775845] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.776334] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.777574] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.784885] tegra194-vi5 15c10000.vi: initialized [ 6.786649] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.788011] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.789161] generic_infoframe_type: 0x87 [ 6.795538] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.799197] tegradc 15200000.display: DT parsed successfully [ 6.807382] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.807390] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.807395] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.807400] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.813099] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.819274] tegradc 15200000.display: Display dc.00000000afde630e registered with id=0 [ 6.820283] mmc0: CQHCI version 5.10 [ 6.826128] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.826137] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.833443] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.840405] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.845617] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.845621] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.846000] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.849093] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.857258] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.871192] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.879135] nvethernet 2490000.ethernet: Macsec not supported [ 6.880540] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.887414] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.895997] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.903013] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.905075] tegradc 15200000.display: probed [ 6.909343] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.934924] mmc0: Command Queue Engine enabled [ 6.937097] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.939720] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.947534] mmc0: periodic cache flush enabled [ 6.956085] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.960710] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.015383] tegra-se-nvhost 15810000.se: initialized [ 7.015440] Console: switching to colour frame buffer device 240x67 [ 7.015804] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.020024] tegradc 15200000.display: fb registered [ 7.020082] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.026492] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.036681] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.042040] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.049396] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.052934] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.055317] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.061784] tegra-se-nvhost 15820000.se: initialized [ 7.087845] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.092677] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.099208] tegra-se-nvhost 15830000.se: initialized [ 7.104272] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.109951] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.116501] tegra-se-nvhost 15840000.se: initialized [ 7.120843] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.122736] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.127483] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.128638] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.128645] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.129209] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.129213] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.129223] usb 1-2: Manufacturer: Generic [ 7.129288] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.129291] Extcon AUX1(HDMI) enable [ 7.129430] tegradc 15210000.display: disp1 connected to head1->sor [ 7.129590] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.129684] tegradc 15210000.display: DT parsed successfully [ 7.129721] tegradc 15210000.display: Display dc.0000000069b93e53 registered with id=1 [ 7.129894] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.129899] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.136606] tegradc 15210000.display: probed [ 7.136789] tegra_actmon d230000.actmon: in actmon_register()... [ 7.136960] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.144398] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.145990] hub 1-2:1.0: USB hub found [ 7.147087] hub 1-2:1.0: 4 ports detected [ 7.245911] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.250246] hvc_sysfs: hypervisor is not present ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.270278] tegradc 15210000.display: fb registered [ 7.270379] tegradc 15200000.display: blank - powerdown [ 7.273687] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.273709] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.273717] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.297980] ALSA device list: [ 7.297986] No soundcards found. [ 7.298728] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.298734] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.298738] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.298742] usb 2-3: Manufacturer: Generic [ 7.309354] hub 2-3:1.0: USB hub found [ 7.311129] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.311133] Extcon AUX1(HDMI) disable [ 7.311205] hub 2-3:1.0: 4 ports detected [ 7.334442] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.335288] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.347478] tegradc 15200000.display: unblank [ 7.348483] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.348671] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.354647] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.356678] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.360686] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.360689] Extcon AUX1(HDMI) enable [ 7.373447] tegradc 15200000.display: sync windows ret = 246 [ 7.393084] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.417083] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.437827] tegradc 15210000.display: blank - powerdown [ 7.442986] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.442989] Extcon DP: HPD disabled [ 7.442993] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.443056] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.468155] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.468179] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.469180] Freeing unused kernel memory: 3968K [ 7.475174] Extcon HDMI: HPD enabled [ 7.475180] tegradc 15200000.display: hdmi: plugged [ 7.495180] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.495305] Run /init as init process [ 7.502039] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.567816] Root device found: mmcblk0p1 [ 7.571288] Found dev node: /dev/mmcblk0p1 [ 7.607864] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.613310] Rootfs mounted over mmcblk0p1 [ 7.622191] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.624632] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.627079] usb 1-3: Product: Bluetooth Radio [ 7.629437] usb 1-3: Manufacturer: Realtek [ 7.631880] usb 1-3: SerialNumber: 00e04c000001 [ 7.653995] Switching from initrd to actual rootfs [ 7.836438] systemd[1]: System time before build time, advancing clock. [ 7.908421] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.913314] systemd[1]: Detected architecture arm64. [ 7.953641] systemd[1]: Set hostname to . [ 8.125897] systemd-sysv-generator[253]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.474417] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.476064] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.481737] systemd[1]: Created slice system-modprobe.slice. [ 8.486454] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.490499] systemd[1]: Created slice User and Session Slice. [ 8.493802] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.497872] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.501253] systemd[1]: Reached target User and Group Name Lookups. [ 8.504323] systemd[1]: Reached target Slices. [ 8.507325] systemd[1]: Reached target Swap. [ 8.511273] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.514817] systemd[1]: Listening on Syslog Socket. [ 8.518390] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.521781] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.526058] systemd[1]: Listening on Journal Audit Socket. [ 8.529678] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.533488] systemd[1]: Listening on Journal Socket. [ 8.537331] systemd[1]: Listening on udev Control Socket. [ 8.542386] systemd[1]: Listening on udev Kernel Socket. [ 8.552462] systemd[1]: Mounting Huge Pages File System... [ 8.560902] systemd[1]: Mounting POSIX Message Queue File System... [ 8.569260] systemd[1]: Mounting RPC Pipe File System... [ 8.578215] systemd[1]: Mounting Kernel Debug File System... [ 8.587224] systemd[1]: Mounting Kernel Trace File System... [ 8.597671] systemd[1]: Starting Journal Service... [ 8.606829] systemd[1]: Starting Set the console keyboard layout... [ 8.615211] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.618721] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.625795] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.633768] systemd[1]: Started Nameserver information manager. [ 8.638211] systemd[1]: Reached target Network (Pre). [ 8.644758] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.646592] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.654626] systemd[1]: Starting Load Kernel Modules... [ 8.662494] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.670244] systemd[1]: Starting udev Coldplug all Devices... [ 8.680984] systemd[1]: Mounted Huge Pages File System. [ 8.685082] systemd[1]: Mounted POSIX Message Queue File System. [ 8.688639] systemd[1]: Mounted RPC Pipe File System. [ 8.692250] systemd[1]: Mounted Kernel Debug File System. [ 8.695818] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.695989] systemd[1]: Mounted Kernel Trace File System. [ 8.697242] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.699250] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.701872] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.701884] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.701889] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.702153] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.702330] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.702514] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.702526] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.725770] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.730420] systemd[1]: nvfb-udev.service: Succeeded. [ 8.734495] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.744941] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.757705] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.759437] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.765916] systemd[1]: Starting Load/Save Random Seed... [ 8.775813] systemd[1]: Starting Create System Users... [ 8.793241] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.793241] [ 8.823335] systemd[1]: Finished Load/Save Random Seed. [ 8.831719] systemd[1]: Finished Load Kernel Modules. [ 8.838292] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.845219] systemd[1]: Mounting Kernel Configuration File System... [ 8.853249] systemd[1]: Started OP-TEE Client Supplicant. [ 8.862473] systemd[1]: Starting Apply Kernel Variables... [ 8.870744] systemd[1]: Mounted Kernel Configuration File System. [ 8.884813] systemd[1]: Finished Create System Users. [ 8.892175] systemd[1]: Finished Set the console keyboard layout. [ 10.381742] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.403878] imx219 9-0010: board setup failed [ 10.404224] imx219: probe of 9-0010 failed with error -121 [ 10.417830] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.443384] imx219 10-0010: board setup failed [ 10.444731] imx219: probe of 10-0010 failed with error -121 [ 10.520225] hot-surface-alert cooling state: 0 -> 1 [ 11.436531] using random self ethernet address [ 11.438396] using random host ethernet address [ 11.823434] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.823440] Creating 1 MTD partitions on "spi6.0": [ 11.823449] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.648896] using random self ethernet address [ 12.650461] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.795966] nvidia: loading out-of-tree module taints kernel. [ 59.306685] watchdog: watchdog0: watchdog did not stop! [ 59.790048] Trying to unregister non-registered hwtime source [ 62.850257] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.852443] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] timeout, ctxsw busy : 0, gr busy : ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-sÿât194_ec_get_ec_list: found 45 ecs ÿäecure exterÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿänal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aÿâclk_dt_late initialized noc_late initialized ÿäuÿâpm_post initialized dbells initialized ÿäg 1ÿâdmce initialized ÿä1ÿâcvc initialized ÿä 03:23:20 UTÿâavfs_clk_mach_post initialized ÿäC 20ÿâavfs_clk_platform_post initialized ÿä22 ÿâcvc_late initialized regulator_post initialized ÿäaarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.620] E> invalid display type [0003.621] E> cannot find any other nvdisp nodes [0003.637] I> edid read success [0003.650] I> edid read success [0003.650] I> width = 640, height = 480, frequency = 25174825 [0003.650] I> width = 1920, height = 1080, frequency = 148500000 [0003.651] I> width = 1280, height = 768, frequency = 79500000 [0003.651] I> width = 1360, height = 768, frequency = 85500000 [0003.651] I> width = 720, height = 480, frequency = 26973026 [0003.655] I> width = 720, height = 576, frequency = 26973026 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.672] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 720, height = 480, frequency = 26973026 [0003.689] I> width = 720, height = 576, frequency = 26973026 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 4096, height = 2160, frequency = 296703296 [0003.724] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.735] I> hdmi_enable, starting HDMI initialisation [0003.740] I> hdmi_enable, HDMI initialisation complete [0003.749] initializing target [0003.750] calling apps_init() [0003.751] starting app kernel_boot_app [0003.751] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bdc98 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bdc98 to 0x00000002587bdcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c1000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b1000000-0x00000000c1000000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000673] Console: colour dummy device 80x25 [ 0.002130] printk: console [tty0] enabled [ 0.002197] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002235] pid_max: default: 32768 minimum: 301 [ 0.002398] LSM: Security Framework initializing [ 0.002464] Yama: becoming mindful. [ 0.002505] SELinux: Initializing. [ 0.002655] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002711] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005770] rcu: Hierarchical SRCU implementation. [ 0.006075] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006742] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006792] DTB Build time: Aug 10 2022 20:31:49 [ 0.009498] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009753] Remapping and enabling EFI services. [ 0.011873] smp: Bringing up secondary CPUs ... [ 0.045590] Detected PIPT I-cache on CPU1 [ 0.045670] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.078504] Detected PIPT I-cache on CPU2 [ 0.078653] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.108237] Detected PIPT I-cache on CPU3 [ 0.108375] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.138173] Detected PIPT I-cache on CPU4 [ 0.138399] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.168200] Detected PIPT I-cache on CPU5 [ 0.168354] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.168721] smp: Brought up 1 node, 6 CPUs [ 0.168957] SMP: Total of 6 processors activated. [ 0.169034] CPU features: detected: Privileged Access Never [ 0.169051] CPU features: detected: LSE atomic instructions [ 0.169064] CPU features: detected: User Access Override [ 0.169078] CPU features: detected: 32-bit EL0 Support [ 0.169092] CPU features: detected: RAS Extension Support [ 0.169105] CPU features: detected: CRC32 instructions [ 0.169119] CPU features: detected: 32-bit EL1 Support [ 0.237004] CPU: All CPU(s) started at EL2 [ 0.243704] devtmpfs: initialized [ 0.290246] Registered cp15_barrier emulation handler [ 0.290372] Registered setend emulation handler [ 0.290392] KASLR enabled [ 0.290656] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.290681] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291978] pinctrl core: initialized pinctrl subsystem [ 0.292906] SMBIOS 3.0.0 present. [ 0.292934] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.293549] NET: Registered protocol family 16 [ 0.295396] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295928] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296615] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296667] audit: initializing netlink subsys (disabled) [ 0.296895] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.297314] thermal_sys: Registered thermal governor 'step_wise' [ 0.297320] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297333] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299454] cpuidle: using governor menu [ 0.299783] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300196] ASID allocator initialised with 32768 entries [ 0.300460] Serial: AMBA PL011 UART driver [ 0.303593] Tegra reboot handler registered. [ 0.375200] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.375344] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.375540] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.375593] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.375729] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.375765] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.375882] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.375918] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.376034] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.376068] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.378145] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.378179] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.378208] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.378232] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.378258] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.378281] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.378304] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.378326] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.378349] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.378372] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.378395] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.378417] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.378440] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.378478] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.378501] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.378551] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.378601] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.378732] mc-err: mcerr ops are set to t19x [ 0.392246] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.392269] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.392281] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.392292] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.398649] ACPI: Interpreter disabled. [ 0.399777] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.401054] iommu: Default domain type: Translated [ 0.401134] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.401495] SCSI subsystem initialized [ 0.401663] usbcore: registered new interface driver usbfs [ 0.401707] usbcore: registered new interface driver hub [ 0.401739] usbcore: registered new device driver usb [ 0.402135] mc: Linux media interface: v0.10 [ 0.402166] videodev: Linux video capture interface: v2.00 [ 0.402476] pps_core: LinuxPPS API ver. 1 registered [ 0.402505] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.402526] PTP clock support registered [ 0.402714] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.403023] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.403112] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.403664] Registered efivars operations [ 0.408329] FPGA manager framework [ 0.408427] Advanced Linux Sound Architecture Driver Initialized. [ 0.409148] Bluetooth: Core ver 2.22 [ 0.409191] NET: Registered protocol family 31 [ 0.409208] Bluetooth: HCI device and connection manager initialized [ 0.409226] Bluetooth: HCI socket layer initialized [ 0.409244] Bluetooth: L2CAP socket layer initialized [ 0.409268] Bluetooth: SCO socket layer initialized [ 0.411792] camchar: rtcpu character device driver loaded [ 0.413207] clocksource: Switched to clocksource arch_sys_counter [ 0.837983] VFS: Disk quotas dquot_6.6.0 [ 0.838084] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.838645] pnp: PnP ACPI: disabled [ 0.854287] la/ptsa driver initialized. [ 0.854452] NET: Registered protocol family 2 [ 0.854663] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.862379] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.862566] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.862928] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.863556] TCP: Hash tables configured (established 65536 bind 65536) [ 0.863732] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.863876] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.864148] NET: Registered protocol family 1 [ 0.865138] RPC: Registered named UNIX socket transport module. [ 0.865169] RPC: Registered udp transport module. [ 0.865238] RPC: Registered tcp transport module. [ 0.865257] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.865281] PCI: CLS 0 bytes, default 64 [ 0.865633] Trying to unpack rootfs image as initramfs... [ 1.132477] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.135668] Freeing initrd memory: 8196K [ 1.140130] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.140163] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.140201] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.140582] kvm [1]: IPA Size Limit: 40 bits [ 1.141091] kvm [1]: vgic interrupt IRQ9 [ 1.141705] kvm [1]: VHE mode initialized successfully [ 1.143324] Initialise system trusted keyrings [ 1.143646] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.152600] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.153646] NFS: Registering the id_resolver key type [ 1.153686] Key type id_resolver registered [ 1.153706] Key type id_legacy registered [ 1.153812] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.153835] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.153894] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.164788] NET: Registered protocol family 38 [ 1.164812] Key type asymmetric registered [ 1.164831] Asymmetric key parser 'x509' registered [ 1.164913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.165241] io scheduler mq-deadline registered [ 1.165260] io scheduler kyber registered [ 1.171894] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.174972] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.175061] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.175131] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.175197] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.175263] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.181314] scrncapt: init (heads:4 wins:6 planes:4) [ 1.181509] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.182667] EINJ: ACPI disabled. [ 1.186289] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.186314] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.186328] tegra-pmc: ### PMC reset level: L1 [ 1.186340] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.186387] tegra-pmc: PMC Prod config success [ 1.192483] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.224970] random: fast init done [ 1.232389] printk: console [ttyTCU0] enabled [ 2.750177] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.754867] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.759463] arm-smmu 10000000.iommu: stage 1 translation [ 2.764845] arm-smmu 10000000.iommu: stage 2 translation [ 2.770165] arm-smmu 10000000.iommu: nested translation [ 2.775514] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.782676] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.793791] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.795771] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.802377] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.810466] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.815399] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.820121] arm-smmu 12000000.iommu: stage 1 translation [ 2.825633] arm-smmu 12000000.iommu: stage 2 translation [ 2.831057] arm-smmu 12000000.iommu: nested translation [ 2.836742] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.843929] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.854713] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.856758] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.863361] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.871077] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.880645] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.884090] tegra_profiler: auth: init [ 2.888288] THERMAL EST: found 3 subdevs [ 2.891445] THERMAL EST num_resources: 0 [ 2.895543] [THERMAL EST subdev 0] [ 2.898613] [THERMAL EST subdev 1] [ 2.902275] [THERMAL EST subdev 2] [ 2.905530] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.911997] THERMAL EST: thz register success. [ 2.915964] THERMAL EST: end of probe, return err: 0 [ 2.921622] nvsciipc: loaded module [ 2.929112] tun: Universal TUN/TAP device driver, 1.6 [ 2.930942] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.937300] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.942854] e1000e: Intel(R) PRO/1000 Network Driver [ 2.947542] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.953889] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.959155] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.965439] PPP generic driver version 2.4.2 [ 2.969404] PPP BSD Compression module registered [ 2.973869] PPP Deflate Compression module registered [ 2.979117] PPP MPPE Compression module registered [ 2.984166] usbcore: registered new interface driver r8152 [ 2.989905] usbcore: registered new interface driver asix [ 2.994989] usbcore: registered new interface driver ax88179_178a [ 3.001356] usbcore: registered new interface driver cdc_ether [ 3.007307] usbcore: registered new interface driver net1080 [ 3.012658] usbcore: registered new interface driver cdc_subset [ 3.018946] usbcore: registered new interface driver zaurus [ 3.024390] usbcore: registered new interface driver cdc_ncm [ 3.030061] usbcore: registered new interface driver aqc111 [ 3.035965] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.041816] ohci-pci: OHCI PCI platform driver [ 3.046334] ohci-platform: OHCI generic platform driver [ 3.052204] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.058458] usbcore: registered new interface driver uas [ 3.062636] usbcore: registered new interface driver usb-storage [ 3.068760] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.074603] mousedev: PS/2 mouse device common for all mice [ 3.079788] usbcore: registered new interface driver xpad [ 3.087821] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.090583] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.098326] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.104667] i2c /dev entries driver [ 3.107941] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.114044] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.119311] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.124721] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.130036] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.135620] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.140711] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.155281] device-mapper: uevent: version 1.0.3 [ 3.155829] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.161636] cpuidle: Initializing cpuidle driver [ 3.165414] sdhci: Secure Digital Host Controller Interface driver [ 3.170134] sdhci: Copyright(c) Pierre Ossman [ 3.173968] Synopsys Designware Multimedia Card Interface Driver [ 3.180225] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.186228] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.187107] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.199722] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.222439] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.232707] vdd-1v0: supplied by regulator-dummy [ 3.238412] vdd-1v8-hs: supplied by regulator-dummy [ 3.243384] vdd-1v8-ls: supplied by regulator-dummy [ 3.248339] vdd-1v8-ao: supplied by regulator-dummy [ 3.252349] vddio-ddr-1v1: supplied by regulator-dummy [ 3.257064] vdd-rtc: supplied by regulator-dummy [ 3.258974] spmic-ldo1: supplied by regulator-dummy [ 3.260311] vdd-ao-3v3: supplied by regulator-dummy [ 3.266636] vddio-emmc-3v3: supplied by regulator-dummy [ 3.272999] spmic-ldo4: supplied by regulator-dummy [ 3.274433] vdd-usb-3v3: supplied by regulator-dummy [ 3.280717] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.287051] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.292754] spmic-ldo8: supplied by vdd-1v8-ls [ 3.294471] gpio-510 (gpio_default): hogged as output/high [ 3.295881] gpio-511 (gpio_default): hogged as output/high [ 3.298855] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.434790] max77686-rtc max77620-rtc: registered as rtc0 [ 3.435929] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.436315] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.283747] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.284975] hid: raw HID events driver (C) Jiri Kosina [ 4.285908] usbcore: registered new interface driver usbhid [ 4.286097] usbhid: USB HID core driver [ 4.288240] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.289824] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.346286] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.420158] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 74.681 ms) ÿá[ 4.373850] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.374486] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.375560] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.376540] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.378751] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.379503] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.380105] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.381796] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.382078] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.384417] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.390493] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.396705] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.402017] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.408024] denver_knobs_init:MTS_VERSION:55637613 [ 4.420463] t19x_cache tegra-cache: probed [ 4.424012] optee: probing for conduit method. [ 4.424934] optee: revision 3.16 (65cc2218) [ 4.426782] optee: dynamic shared memory is enabled [ 4.428953] optee: initialized driver [ 4.436431] nvpmodel: initialized successfully [ 4.436975] tegra_hv: get_hvd: not initialized yet [ 4.440874] user_ivc_mempool: hypervisor not present [ 4.447352] usbcore: registered new interface driver snd-usb-audio [ 4.453758] u32 classifier [ 4.454542] input device check on [ 4.458368] Actions configured [ 4.462048] Initializing XFRM netlink socket [ 4.467009] NET: Registered protocol family 10 [ 4.473654] Segment Routing with IPv6 [ 4.474398] NET: Registered protocol family 17 [ 4.478435] NET: Registered protocol family 15 [ 4.482840] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.496750] Bluetooth: RFCOMM socket layer initialized [ 4.501570] Bluetooth: RFCOMM ver 1.11 [ 4.505340] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.510877] Bluetooth: HIDP socket layer initialized [ 4.517149] 9pnet: Installing 9P2000 support [ 4.520298] Key type dns_resolver registered [ 4.526102] registered taskstats version 1 [ 4.528744] Loading compiled-in X.509 certificates [ 4.543099] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.544485] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.555265] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.556674] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.565599] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.573890] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.689309] tegra194-pcie 14160000.pcie: Link up [ 4.692757] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.692997] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.693314] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.693536] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.693731] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.694194] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.694754] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.707889] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.708365] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.708792] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.710679] pci 0004:01:00.0: supports D1 D2 [ 4.710863] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.721837] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.722190] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.722389] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.722749] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.723058] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.723300] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.723827] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.731302] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.740045] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.750153] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.754858] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.760577] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.767240] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.778181] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.778643] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.786380] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.795064] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.910204] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.910972] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.911180] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.911408] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.911657] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.911863] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.912277] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.912710] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.932264] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.932658] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.934783] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.936127] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.938176] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.939880] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.940715] pci 0005:00:00.0: Removing from iommu group 7 [ 5.940966] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.973021] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.995986] host1x 13e10000.host1x: initialized [ 5.997896] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.998950] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.000109] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.000767] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.001988] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.002673] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.003673] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.004268] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.005353] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.010433] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.020545] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.027439] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.037157] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.044390] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.054220] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.061372] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.071204] falcon 15340000.vic: Adding to iommu group 17 [ 6.085669] falcon 15340000.vic: initialized [ 6.086645] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.092048] falcon 15380000.nvjpg: initialized [ 6.092651] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.103657] falcon 154c0000.nvenc: initialized [ 6.104233] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.113878] falcon 15a80000.nvenc1: initialized [ 6.114422] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.126260] nvdec 15480000.nvdec: initialized [ 6.126928] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.136431] nvdec 15140000.nvdec1: initialized [ 6.137023] tsec 15500000.tsec: Adding to iommu group 18 [ 6.142682] tsec 15500000.tsec: initialized [ 6.143108] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.151472] tsec 15100000.tsecb: initialized [ 6.155255] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.178964] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.190141] gpio-374 (wifi-enable): hogged as output/high [ 6.190534] gpio-431 (camera-control-output-low): hogged as output/low [ 6.190791] gpio-432 (camera-control-output-low): hogged as output/low [ 6.192378] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.194360] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.195789] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.202347] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.207840] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.213647] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.219043] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.227033] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.234633] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.246387] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.251358] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.257498] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.266081] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.275541] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.282422] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.290054] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.296634] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.306311] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.312319] pva 16000000.pva0: Adding to iommu group 22 [ 6.339138] pva 16000000.pva0: initialized [ 6.344350] pva 16800000.pva1: Adding to iommu group 23 [ 6.355115] pva 16800000.pva1: initialized [ 6.360285] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.372762] nvdla 15880000.nvdla0: initialized [ 6.374335] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.383194] nvdla 158c0000.nvdla1: initialized [ 6.385941] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.385983] tegradc 15200000.display: Adding to iommu group 26 [ 6.386209] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.386285] tegradccommon 15200000.display-hub: dma mapping done [ 6.394352] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.394861] generic_infoframe_type: 0x87 [ 6.395111] tegradc 15200000.display: DT parsed successfully [ 6.395421] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.402733] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.403939] tegradc 15210000.display: Adding to iommu group 26 [ 6.408609] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.422030] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.425878] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.426328] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.434136] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.440380] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.448577] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.462030] tegra_cec 3960000.tegra_cec: probed [ 6.462289] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.467528] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.472555] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.484955] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.486651] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.502963] kfuse 3830000.kfuse: initialized [ 6.507544] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.507929] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.520700] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.520890] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.527561] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.535736] tegradc 15210000.display: disp0 connected to head1->sor [ 6.540591] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.546098] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.558552] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.561962] tegradc 15210000.display: DT parsed successfully [ 6.568914] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.573749] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.591810] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.597019] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.616238] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.616638] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.620060] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.628540] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.637207] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.643567] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.651281] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.658499] usb usb1: Product: xHCI Host Controller [ 6.663200] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.669497] usb usb1: SerialNumber: 3610000.xhci [ 6.675447] hub 1-0:1.0: USB hub found [ 6.678137] hub 1-0:1.0: 4 ports detected [ 6.682789] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.687520] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.695077] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.703155] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.710981] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.718218] usb usb2: Product: xHCI Host Controller [ 6.722878] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.729373] usb usb2: SerialNumber: 3610000.xhci [ 6.734946] hub 2-0:1.0: USB hub found [ 6.737905] hub 2-0:1.0: 4 ports detected [ 6.779525] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.784845] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.786293] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.786505] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.799652] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.800733] tegra194-cpufreq ccplex: probed with BWMGR [ 6.801932] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.802659] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.803122] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.804491] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.813265] mmc0: CQHCI version 5.10 [ 6.815016] tegra194-vi5 15c10000.vi: initialized [ 6.816293] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.817783] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.821494] generic_infoframe_type: 0x87 [ 6.828097] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.831612] tegradc 15200000.display: DT parsed successfully [ 6.839681] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.839692] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.845258] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.851777] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.859900] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.866633] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.873268] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.881557] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.887639] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.887646] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.906606] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.909069] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.932461] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.933146] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.938213] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.938445] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.945226] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.953044] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.962702] nvethernet 2490000.ethernet: Macsec not supported [ 6.964052] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.969261] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.971577] tegradc 15200000.display: probed [ 6.978218] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 7.008465] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.015851] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.018190] mmc0: Command Queue Engine enabled [ 7.023850] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.026847] mmc0: periodic cache flush enabled [ 7.026868] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.035002] tegra-se-nvhost 15810000.se: initialized [ 7.038091] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.053947] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.054084] Console: switching to colour frame buffer device 240x67 [ 7.058720] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.060891] tegradc 15200000.display: fb registered [ 7.067716] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.073037] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.078984] tegra-se-nvhost 15820000.se: initialized [ 7.096110] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.097130] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.099844] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.101218] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.107499] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.116855] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.121837] tegra-se-nvhost 15830000.se: initialized [ 7.127377] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.127387] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.136598] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.140592] usb 1-2: Manufacturer: Generic [ 7.142819] hub 1-2:1.0: USB hub found [ 7.148459] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.153324] hub 1-2:1.0: 4 ports detected [ 7.159499] tegra-se-nvhost 15840000.se: initialized [ 7.180360] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.183907] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.191968] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.198674] tegra_actmon d230000.actmon: in actmon_register()... [ 7.204639] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.205291] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.210898] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.218568] Extcon AUX1(HDMI) enable [ 7.226085] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.231001] tegradc 15210000.display: disp1 connected to head1->sor [ 7.234972] hvc_sysfs: hypervisor is not present [ 7.242488] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.249339] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.253294] tegradc 15210000.display: DT parsed successfully [ 7.273633] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.275803] ALSA device list: [ 7.281834] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.284795] No soundcards found. [ 7.291354] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.295099] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.307273] tegradc 15210000.display: probed [ 7.308938] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.320668] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.320673] usb 2-3: Manufacturer: Generic [ 7.329618] tegradc 15210000.display: fb registered [ 7.331281] hub 2-3:1.0: USB hub found [ 7.332992] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.332997] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.333025] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.335649] Freeing unused kernel memory: 3968K [ 7.340545] hub 2-3:1.0: 4 ports detected [ 7.353320] Run /init as init process [ 7.371432] tegradc 15210000.display: blank - powerdown ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.376237] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.376241] Extcon DP: HPD disabled [ 7.376246] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.376262] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.376267] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.376350] tegradc 15200000.display: blank - powerdown [ 7.413251] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.414100] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.414104] Extcon AUX1(HDMI) disable [ 7.437462] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.438309] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.451348] tegradc 15200000.display: unblank [ 7.452395] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.452604] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.458363] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.460215] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.464214] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.464218] Extcon AUX1(HDMI) enable [ 7.477004] tegradc 15200000.display: sync windows ret = 247 [ 7.489279] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.512853] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.516496] Extcon HDMI: HPD enabled [ 7.519905] tegradc 15200000.display: hdmi: plugged [ 7.562432] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.564032] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.565366] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.565589] usb 1-3: Product: Bluetooth Radio [ 7.567095] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.568420] usb 1-3: Manufacturer: Realtek [ 7.568425] usb 1-3: SerialNumber: 00e04c000001 [ 7.571262] Root device found: mmcblk0p1 [ 7.576155] Found dev node: /dev/mmcblk0p1 [ 7.613032] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.618714] Rootfs mounted over mmcblk0p1 [ 7.649051] Switching from initrd to actual rootfs [ 7.794235] systemd[1]: System time before build time, advancing clock. [ 7.824289] random: crng init done [ 7.869648] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.874697] systemd[1]: Detected architecture arm64. [ 7.913442] systemd[1]: Set hostname to . [ 8.075896] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.436137] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.437969] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.443825] systemd[1]: Created slice system-modprobe.slice. [ 8.448643] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.452912] systemd[1]: Created slice User and Session Slice. [ 8.456473] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.460692] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.464296] systemd[1]: Reached target User and Group Name Lookups. [ 8.467533] systemd[1]: Reached target Slices. [ 8.470684] systemd[1]: Reached target Swap. [ 8.474717] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.478467] systemd[1]: Listening on Syslog Socket. [ 8.482069] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.486783] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.492276] systemd[1]: Listening on Journal Audit Socket. [ 8.496011] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.499808] systemd[1]: Listening on Journal Socket. [ 8.503572] systemd[1]: Listening on udev Control Socket. [ 8.507202] systemd[1]: Listening on udev Kernel Socket. [ 8.516381] systemd[1]: Mounting Huge Pages File System... [ 8.525111] systemd[1]: Mounting POSIX Message Queue File System... [ 8.533647] systemd[1]: Mounting RPC Pipe File System... [ 8.542457] systemd[1]: Mounting Kernel Debug File System... [ 8.551467] systemd[1]: Mounting Kernel Trace File System... [ 8.561481] systemd[1]: Starting Journal Service... [ 8.570451] systemd[1]: Starting Set the console keyboard layout... [ 8.578692] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.582280] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.588628] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.596699] systemd[1]: Started Nameserver information manager. [ 8.602170] systemd[1]: Reached target Network (Pre). [ 8.610872] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.612703] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.621668] systemd[1]: Starting Load Kernel Modules... [ 8.630486] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.639254] systemd[1]: Starting udev Coldplug all Devices... [ 8.650402] systemd[1]: Mounted Huge Pages File System. [ 8.654133] systemd[1]: Mounted POSIX Message Queue File System. [ 8.657772] systemd[1]: Mounted RPC Pipe File System. [ 8.661818] systemd[1]: Mounted Kernel Debug File System. [ 8.663431] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.664353] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.664360] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.664370] nvmap_page_pool_init: Total RAM pages: 1752675 [ 8.664375] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.664610] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.664823] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.664996] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.665011] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.668890] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.684536] systemd[1]: Mounted Kernel Trace File System. [ 8.691088] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.695815] systemd[1]: nvfb-udev.service: Succeeded. [ 8.699962] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.710542] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.722918] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.724690] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.731109] systemd[1]: Starting Load/Save Random Seed... [ 8.741267] systemd[1]: Starting Create System Users... [ 8.761447] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.761447] [ 8.794598] systemd[1]: Finished Load Kernel Modules. [ 8.800884] systemd[1]: Finished Load/Save Random Seed. [ 8.805923] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.812485] systemd[1]: Mounting Kernel Configuration File System... [ 8.820946] systemd[1]: Started OP-TEE Client Supplicant. [ 8.829405] systemd[1]: Starting Apply Kernel Variables... [ 8.838924] systemd[1]: Finished Set the console keyboard layout. [ 8.843141] systemd[1]: Mounted Kernel Configuration File System. [ 8.854549] systemd[1]: Finished Create System Users. [ 10.298333] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.304923] imx219 9-0010: board setup failed [ 10.305006] imx219: probe of 9-0010 failed with error -121 [ 10.316336] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.322794] imx219 10-0010: board setup failed [ 10.324009] imx219: probe of 10-0010 failed with error -121 [ 10.352562] hot-surface-alert cooling state: 0 -> 1 [ 10.893670] using random self ethernet address [ 10.894814] using random host ethernet address [ 12.044493] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.044500] Creating 1 MTD partitions on "spi6.0": [ 12.044521] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.510974] using random self ethernet address [ 12.512604] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.836838] nvidia: loading out-of-tree module taints kernel. [ 59.315032] watchdog: watchdog0: watchdog did not stop! [ 59.845973] Trying to unregister non-registered hwtime source [ 62.903423] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.905004] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [EÒÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 67000 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNIÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäNG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.208] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.248] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.257] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.306] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.315] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.364] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.373] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.445] I> Bl_dtb @0xadf00000 [0003.448] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.482] I> register 'maxim' power off handle [0003.484] I> virtual i2c enabled [0003.484] I> registered 'maxim,max20024' pmic [0003.484] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.542] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.555] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.607] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.630] I> edid read success [0003.642] I> edid read success [0003.642] I> width = 640, height = 480, frequency = 25174825 [0003.643] I> width = 1920, height = 1080, frequency = 148500000 [0003.643] I> width = 1280, height = 768, frequency = 79500000 [0003.644] I> width = 1360, height = 768, frequency = 85500000 [0003.644] I> width = 720, height = 480, frequency = 26973026 [0003.648] I> width = 720, height = 576, frequency = 26973026 [0003.653] I> width = 1280, height = 720, frequency = 74175824 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1920, height = 1080, frequency = 148351648 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 720, height = 480, frequency = 26973026 [0003.682] I> width = 720, height = 576, frequency = 26973026 [0003.687] I> width = 3840, height = 2160, frequency = 296703296 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 4096, height = 2160, frequency = 296703296 [0003.716] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.727] I> hdmi_enable, starting HDMI initialisation [0003.732] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.743] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000662] Console: colour dummy device 80x25 [ 0.002042] printk: console [tty0] enabled [ 0.002111] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002146] pid_max: default: 32768 minimum: 301 [ 0.002315] LSM: Security Framework initializing [ 0.002374] Yama: becoming mindful. [ 0.002420] SELinux: Initializing. [ 0.002567] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002632] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005570] rcu: Hierarchical SRCU implementation. [ 0.005814] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006495] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006553] DTB Build time: Aug 10 2022 20:31:49 [ 0.009366] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009649] Remapping and enabling EFI services. [ 0.011659] smp: Bringing up secondary CPUs ... [ 0.040871] Detected PIPT I-cache on CPU1 [ 0.040973] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070374] Detected PIPT I-cache on CPU2 [ 0.070519] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100144] Detected PIPT I-cache on CPU3 [ 0.100238] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130092] Detected PIPT I-cache on CPU4 [ 0.130286] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160017] Detected PIPT I-cache on CPU5 [ 0.160117] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160423] smp: Brought up 1 node, 6 CPUs [ 0.160595] SMP: Total of 6 processors activated. [ 0.160673] CPU features: detected: Privileged Access Never [ 0.160698] CPU features: detected: LSE atomic instructions [ 0.160711] CPU features: detected: User Access Override [ 0.160723] CPU features: detected: 32-bit EL0 Support [ 0.160735] CPU features: detected: RAS Extension Support [ 0.160746] CPU features: detected: CRC32 instructions [ 0.160758] CPU features: detected: 32-bit EL1 Support [ 0.229597] CPU: All CPU(s) started at EL2 [ 0.235825] devtmpfs: initialized [ 0.303679] Registered cp15_barrier emulation handler [ 0.303757] Registered setend emulation handler [ 0.303782] KASLR enabled [ 0.304084] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.304119] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.306167] pinctrl core: initialized pinctrl subsystem [ 0.307407] SMBIOS 3.0.0 present. [ 0.307449] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.308217] NET: Registered protocol family 16 [ 0.310847] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.311621] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.312662] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.312761] audit: initializing netlink subsys (disabled) [ 0.313156] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1 [ 0.313743] thermal_sys: Registered thermal governor 'step_wise' [ 0.313752] thermal_sys: Registered thermal governor 'power_allocator' [ 0.313781] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.317465] cpuidle: using governor menu [ 0.318094] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.318537] ASID allocator initialised with 32768 entries [ 0.318925] Serial: AMBA PL011 UART driver [ 0.324380] Tegra reboot handler registered. [ 0.417027] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.417226] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.417500] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.417553] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.417732] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.417783] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.417970] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.418046] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.418263] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.418315] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.421388] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.421454] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.421517] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.421571] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.421638] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.421673] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.421704] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.421736] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.421768] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.421799] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.421831] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.421862] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.421894] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.421924] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.421983] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.422016] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.422047] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.422219] mc-err: mcerr ops are set to t19x [ 0.438645] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.438676] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.438694] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.438710] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.447341] ACPI: Interpreter disabled. [ 0.449045] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.451103] iommu: Default domain type: Translated [ 0.451181] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.451734] SCSI subsystem initialized [ 0.451930] usbcore: registered new interface driver usbfs [ 0.451997] usbcore: registered new interface driver hub [ 0.452044] usbcore: registered new device driver usb [ 0.452824] mc: Linux media interface: v0.10 [ 0.452892] videodev: Linux video capture interface: v2.00 [ 0.453388] pps_core: LinuxPPS API ver. 1 registered [ 0.453405] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.453435] PTP clock support registered [ 0.453772] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.454172] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.454320] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.455107] Registered efivars operations [ 0.461769] FPGA manager framework [ 0.461943] Advanced Linux Sound Architecture Driver Initialized. [ 0.462744] Bluetooth: Core ver 2.22 [ 0.462797] NET: Registered protocol family 31 [ 0.462813] Bluetooth: HCI device and connection manager initialized [ 0.462835] Bluetooth: HCI socket layer initialized [ 0.462852] Bluetooth: L2CAP socket layer initialized [ 0.462881] Bluetooth: SCO socket layer initialized [ 0.464889] camchar: rtcpu character device driver loaded [ 0.465828] clocksource: Switched to clocksource arch_sys_counter [ 0.878832] VFS: Disk quotas dquot_6.6.0 [ 0.878924] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.879352] pnp: PnP ACPI: disabled [ 0.892661] la/ptsa driver initialized. [ 0.892869] NET: Registered protocol family 2 [ 0.893068] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.900680] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.900841] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.901207] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.901878] TCP: Hash tables configured (established 65536 bind 65536) [ 0.902012] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.902139] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.902435] NET: Registered protocol family 1 [ 0.903291] RPC: Registered named UNIX socket transport module. [ 0.903325] RPC: Registered udp transport module. [ 0.903339] RPC: Registered tcp transport module. [ 0.903354] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.903378] PCI: CLS 0 bytes, default 64 [ 0.903635] Trying to unpack rootfs image as initramfs... [ 1.167240] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.170446] Freeing initrd memory: 8196K [ 1.174467] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.174501] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.174534] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.174860] kvm [1]: IPA Size Limit: 40 bits [ 1.175367] kvm [1]: vgic interrupt IRQ9 [ 1.176044] kvm [1]: VHE mode initialized successfully [ 1.177356] Initialise system trusted keyrings [ 1.177625] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.183021] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.183741] NFS: Registering the id_resolver key type [ 1.183776] Key type id_resolver registered [ 1.183790] Key type id_legacy registered [ 1.183873] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.183896] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.183937] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.193638] NET: Registered protocol family 38 [ 1.193665] Key type asymmetric registered [ 1.193680] Asymmetric key parser 'x509' registered [ 1.193733] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.194082] io scheduler mq-deadline registered [ 1.194105] io scheduler kyber registered [ 1.199482] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.202283] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.202359] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.202427] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.202494] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.202589] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.207821] scrncapt: init (heads:4 wins:6 planes:4) [ 1.208018] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.208843] EINJ: ACPI disabled. [ 1.212193] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.212218] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.212232] tegra-pmc: ### PMC reset level: L1 [ 1.212245] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.212311] tegra-pmc: PMC Prod config success [ 1.217062] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.232459] random: fast init done [ 1.234111] printk: console [ttyTCU0] enabled [ 2.774202] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.778779] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.783573] arm-smmu 10000000.iommu: stage 1 translation [ 2.788831] arm-smmu 10000000.iommu: stage 2 translation [ 2.794344] arm-smmu 10000000.iommu: nested translation [ 2.799940] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.806857] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.816294] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.820273] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.826548] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.834259] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.839868] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.844563] arm-smmu 12000000.iommu: stage 1 translation [ 2.849901] arm-smmu 12000000.iommu: stage 2 translation [ 2.855501] arm-smmu 12000000.iommu: nested translation [ 2.860672] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.867854] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.876913] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.880989] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.887792] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.895089] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.904666] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.907924] tegra_profiler: auth: init [ 2.912151] THERMAL EST: found 3 subdevs [ 2.915634] THERMAL EST num_resources: 0 [ 2.919486] [THERMAL EST subdev 0] [ 2.922791] [THERMAL EST subdev 1] [ 2.926218] [THERMAL EST subdev 2] [ 2.929699] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.936135] THERMAL EST: thz register success. [ 2.940165] THERMAL EST: end of probe, return err: 0 [ 2.945397] nvsciipc: loaded module [ 2.951919] tun: Universal TUN/TAP device driver, 1.6 [ 2.955076] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.961472] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.966781] e1000e: Intel(R) PRO/1000 Network Driver [ 2.971983] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.978044] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.983338] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.989424] PPP generic driver version 2.4.2 [ 2.993488] PPP BSD Compression module registered [ 2.998339] PPP Deflate Compression module registered [ 3.003558] PPP MPPE Compression module registered [ 3.008328] usbcore: registered new interface driver r8152 [ 3.014093] usbcore: registered new interface driver asix [ 3.019152] usbcore: registered new interface driver ax88179_178a [ 3.025529] usbcore: registered new interface driver cdc_ether [ 3.031222] usbcore: registered new interface driver net1080 [ 3.037091] usbcore: registered new interface driver cdc_subset [ 3.042867] usbcore: registered new interface driver zaurus [ 3.048816] usbcore: registered new interface driver cdc_ncm [ 3.054258] usbcore: registered new interface driver aqc111 [ 3.060101] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.066218] ohci-pci: OHCI PCI platform driver [ 3.070248] ohci-platform: OHCI generic platform driver [ 3.075907] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.082119] usbcore: registered new interface driver uas [ 3.086802] usbcore: registered new interface driver usb-storage [ 3.092605] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.098796] mousedev: PS/2 mouse device common for all mice [ 3.103964] usbcore: registered new interface driver xpad [ 3.111700] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.114456] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.122498] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.128664] i2c /dev entries driver [ 3.132324] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.137934] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.143451] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.148554] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.154131] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.159658] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.165130] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.176597] device-mapper: uevent: version 1.0.3 [ 3.176965] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.185526] cpuidle: Initializing cpuidle driver [ 3.189597] sdhci: Secure Digital Host Controller Interface driver [ 3.194068] sdhci: Copyright(c) Pierre Ossman [ 3.198420] Synopsys Designware Multimedia Card Interface Driver [ 3.204665] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.210376] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.211201] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.223857] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.242884] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.252287] vdd-1v0: supplied by regulator-dummy [ 3.257726] vdd-1v8-hs: supplied by regulator-dummy [ 3.262656] vdd-1v8-ls: supplied by regulator-dummy [ 3.267488] vdd-1v8-ao: supplied by regulator-dummy [ 3.271357] vddio-ddr-1v1: supplied by regulator-dummy [ 3.275776] vdd-rtc: supplied by regulator-dummy [ 3.277466] spmic-ldo1: supplied by regulator-dummy [ 3.278664] vdd-ao-3v3: supplied by regulator-dummy [ 3.284824] vddio-emmc-3v3: supplied by regulator-dummy [ 3.291127] spmic-ldo4: supplied by regulator-dummy [ 3.292326] vdd-usb-3v3: supplied by regulator-dummy [ 3.298449] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.304616] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.310101] spmic-ldo8: supplied by vdd-1v8-ls [ 3.311508] gpio-510 (gpio_default): hogged as output/high [ 3.313060] gpio-511 (gpio_default): hogged as output/high [ 3.317651] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.456465] max77686-rtc max77620-rtc: registered as rtc0 [ 3.457811] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.458127] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.264875] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.266028] hid: raw HID events driver (C) Jiri Kosina [ 4.266837] usbcore: registered new interface driver usbhid [ 4.267000] usbhid: USB HID core driver [ 4.269061] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.270461] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.299373] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.373599] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 75.035 ms) ÿá[ 4.355017] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.355531] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.356638] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.357349] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.359172] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.359859] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.360493] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.362070] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.362315] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.365182] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.371476] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.377313] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.382565] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.388463] denver_knobs_init:MTS_VERSION:55637613 [ 4.401389] t19x_cache tegra-cache: probed [ 4.404206] optee: probing for conduit method. [ 4.405030] optee: revision 3.16 (65cc2218) [ 4.406012] optee: dynamic shared memory is enabled [ 4.409646] optee: initialized driver [ 4.416133] nvpmodel: initialized successfully [ 4.417123] tegra_hv: get_hvd: not initialized yet [ 4.421939] user_ivc_mempool: hypervisor not present [ 4.428373] usbcore: registered new interface driver snd-usb-audio [ 4.434703] u32 classifier [ 4.435669] input device check on [ 4.439369] Actions configured [ 4.443270] Initializing XFRM netlink socket [ 4.448115] NET: Registered protocol family 10 [ 4.454269] Segment Routing with IPv6 [ 4.455548] NET: Registered protocol family 17 [ 4.459558] NET: Registered protocol family 15 [ 4.464311] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.477847] Bluetooth: RFCOMM socket layer initialized [ 4.482288] Bluetooth: RFCOMM ver 1.11 [ 4.486419] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.491976] Bluetooth: HIDP socket layer initialized [ 4.498115] 9pnet: Installing 9P2000 support [ 4.501384] Key type dns_resolver registered [ 4.507370] registered taskstats version 1 [ 4.510116] Loading compiled-in X.509 certificates [ 4.522626] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.525699] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.535746] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.538055] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.546631] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.554833] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.669870] tegra194-pcie 14160000.pcie: Link up [ 4.672645] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.672916] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.673043] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.673238] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.673467] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.673934] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.674402] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.688373] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.688948] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.689396] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.691132] pci 0004:01:00.0: supports D1 D2 [ 4.691319] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.703469] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.703844] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.704103] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.704551] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.704854] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.704990] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.705200] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.712104] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.720342] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.730603] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.735359] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.741026] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.747838] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.756688] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.758561] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.766752] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.775480] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.878023] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.878538] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.878809] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.878977] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.879292] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.879489] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.879988] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.880389] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.905586] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.906041] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.907706] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.908736] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.910755] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.912399] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.913429] pci 0005:00:00.0: Removing from iommu group 7 [ 5.913748] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.949646] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.974671] host1x 13e10000.host1x: initialized [ 5.976211] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.977121] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.978421] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.979217] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.980410] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.981128] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.982457] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.983162] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.984135] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.984735] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.988029] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.995237] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.005256] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.011971] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.022070] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.028826] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.039021] falcon 15340000.vic: Adding to iommu group 17 [ 6.053774] falcon 15340000.vic: initialized [ 6.054693] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.059941] falcon 15380000.nvjpg: initialized [ 6.060502] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.073375] falcon 154c0000.nvenc: initialized [ 6.074129] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.083012] falcon 15a80000.nvenc1: initialized [ 6.083577] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.094848] nvdec 15480000.nvdec: initialized [ 6.095360] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.104979] nvdec 15140000.nvdec1: initialized [ 6.105572] tsec 15500000.tsec: Adding to iommu group 18 [ 6.111307] tsec 15500000.tsec: initialized [ 6.111881] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.119685] tsec 15100000.tsecb: initialized [ 6.123786] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.149454] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.162070] gpio-374 (wifi-enable): hogged as output/high [ 6.162381] gpio-431 (camera-control-output-low): hogged as output/low [ 6.162705] gpio-432 (camera-control-output-low): hogged as output/low [ 6.164538] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.167070] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.167653] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.170163] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.175760] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.182043] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.187283] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.195464] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.202722] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.214580] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.219328] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.225085] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.233955] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.243462] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.250947] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.258063] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.264422] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.274031] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.280087] pva 16000000.pva0: Adding to iommu group 22 [ 6.307882] pva 16000000.pva0: initialized [ 6.311973] pva 16800000.pva1: Adding to iommu group 23 [ 6.324441] pva 16800000.pva1: initialized [ 6.328209] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.341487] nvdla 15880000.nvdla0: initialized [ 6.342954] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.351237] nvdla 158c0000.nvdla1: initialized [ 6.353983] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.354256] tegradc 15200000.display: Adding to iommu group 26 [ 6.354593] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.354923] tegradccommon 15200000.display-hub: dma mapping done [ 6.363046] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.363430] generic_infoframe_type: 0x87 [ 6.363716] tegradc 15200000.display: DT parsed successfully [ 6.364055] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.369703] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.371098] tegradc 15210000.display: Adding to iommu group 26 [ 6.376571] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.378051] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.378063] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.378066] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.378985] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.378996] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.380208] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.384462] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.388563] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.449127] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.449150] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.449530] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.457441] tegradc 15210000.display: disp0 connected to head1->sor [ 6.461202] tegra_cec 3960000.tegra_cec: probed [ 6.467284] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.473999] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.478003] tegradc 15210000.display: DT parsed successfully [ 6.492534] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.496535] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.503691] kfuse 3830000.kfuse: initialized [ 6.516512] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.522154] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.528976] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.535168] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.544792] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.549715] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.559118] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.564851] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.584936] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.585344] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.588165] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.596309] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.604781] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.611600] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.618913] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.626339] usb usb1: Product: xHCI Host Controller [ 6.631046] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.637344] usb usb1: SerialNumber: 3610000.xhci [ 6.643233] hub 1-0:1.0: USB hub found [ 6.645967] hub 1-0:1.0: 4 ports detected [ 6.650618] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.655323] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.663172] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.670991] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.678744] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.685990] usb usb2: Product: xHCI Host Controller [ 6.690720] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.696929] usb usb2: SerialNumber: 3610000.xhci [ 6.702386] hub 2-0:1.0: USB hub found [ 6.705372] hub 2-0:1.0: 4 ports detected [ 6.748111] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.754140] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.755574] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.755757] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.769206] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.770331] tegra194-cpufreq ccplex: probed with BWMGR [ 6.771711] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.772174] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.772682] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.773891] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.781089] tegra194-vi5 15c10000.vi: initialized [ 6.782252] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.783901] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.785853] generic_infoframe_type: 0x87 [ 6.792402] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.795774] tegradc 15200000.display: DT parsed successfully [ 6.804126] mmc0: CQHCI version 5.10 [ 6.809502] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.809847] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.809857] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.809862] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.809866] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.817849] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.821990] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.827574] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.834457] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.834461] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.834849] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.840411] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.841039] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.847595] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.854999] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.862154] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.878061] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.891078] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.901471] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.901621] nvethernet 2490000.ethernet: Macsec not supported [ 6.906020] ************************************** [ 6.906024] CPU:0, Error:cbb-noc [ 6.906028] Error Logger : 0 [ 6.906037] ErrLog0 : 0x80030000 [ 6.906040] Transaction Type : RD - Read, Incrementing [ 6.906047] Error Code : SLV [ 6.979345] Error Source : Target [ 6.983019] Error Description : Target error detected by CBB slave [ 6.989411] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.996685] Packet header Lock : 0 [ 7.000348] Packet header Len1 : 3 [ 7.004280] NOC protocol version : version >= 2.7 [ 7.009027] ErrLog1 : 0x352426 [ 7.012335] ErrLog2 : 0x0 [ 7.015223] RouteId : 0x352426 [ 7.018911] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 7.023622] Targflow : host1x_p2pm/T/host1x_p2pm [ 7.028692] TargSubRange : 18 [ 7.031929] SeqId : 0 [ 7.034473] ErrLog3 : 0x4045c [ 7.037968] ErrLog4 : 0x0 [ 7.040617] Address accessed : 0x15b4045c [ 7.045062] ErrLog5 : 0x989f851 [ 7.048298] Non-Modify : 0x1 [ 7.051711] AXI ID : 0x13 [ 7.055118] Master ID : CCPLEX [ 7.058443] Security Group(GRPSEC): 0x7e [ 7.062402] Cache : 0x1 -- Bufferable [ 7.066586] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.073409] FALCONSEC : 0x0 [ 7.076560] Virtual Queuing Channel(VQC): 0x0 [ 7.081457] ************************************** [ 7.086492] ------------[ cut here ]------------ [ 7.090736] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.097558] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.102549] Modules linked in: [ 7.105784] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 7.112429] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.124426] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.130726] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.135187] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.140168] sp : ffff800010003de0 [ 7.143326] x29: ffff800010003de0 x28: 0000000000000001 [ 7.149008] x27: 0000000000000005 x26: ffffd698ce493f58 [ 7.154444] x25: ffffd698cedece10 x24: 0000000000000001 [ 7.159598] x23: ffffd698ce787000 x22: ffffd698cec0ea00 [ 7.164935] x21: 000000000000000f x20: ffff11a900ed8980 [ 7.170447] x19: ffffd698cec0ea00 x18: 0000000000000010 [ 7.175872] x17: 0000000000004000 x16: 00000000ce0b7025 [ 7.181213] x15: ffffd698cea82bf0 x14: 0720072007200720 [ 7.186724] x13: 0720072007200720 x12: 0720072007200720 [ 7.192494] x11: 0720072007200720 x10: 0720072007200720 [ 7.197748] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.203260] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.209031] x5 : 0000000000057fa8 x4 : ffffd698cea97968 [ 7.214198] x3 : 00000000ffffffff x2 : ffffd698ccf2e090 [ 7.219793] x1 : ffffd698cea82680 x0 : 0000000000010001 [ 7.224872] Call trace: [ 7.227326] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.231631] __handle_irq_event_percpu+0x68/0x2a0 [ 7.236339] handle_irq_event_percpu+0x40/0xa0 [ 7.240898] handle_irq_event+0x50/0xf0 [ 7.244388] handle_fasteoi_irq+0xc0/0x170 [ 7.248670] generic_handle_irq+0x40/0x60 [ 7.252696] __handle_domain_irq+0x70/0xd0 [ 7.256638] efi_header_end+0xb0/0xf0 [ 7.260154] el1_irq+0xd0/0x180 [ 7.263372] cpuidle_enter_state+0xb8/0x410 [ 7.267569] cpuidle_enter+0x40/0x60 [ 7.271086] call_cpuidle+0x44/0x80 [ 7.274569] do_idle+0x208/0x270 [ 7.277982] cpu_startup_entry+0x2c/0x70 [ 7.281763] rest_init+0xdc/0xe8 [ 7.284987] arch_call_rest_init+0x18/0x20 [ 7.289183] start_kernel+0x514/0x54c [ 7.292256] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.298469] ---[ end trace dc89b777028306a3 ]--- [ 7.303186] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.310970] SMP: stopping secondary CPUs [ 7.314842] Kernel Offset: 0x5698bcd70000 from 0xffff800010000000 [ 7.320942] PHYS_OFFSET: 0xffffee5800000000 [ 7.325058] CPU features: 0x8240002,03802a30 [ 7.329260] Memory Limit: none [ 7.332416] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.340] W> Cannot find any partition table for 00000003 [0001.341] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.358] I> Active Boot chain : 0 [0002.029] I> Relocating BR-BCT [0002.030] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.338] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/Tÿâclk_early initialized ÿäC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secuÿât194_ec_get_ec_list: found 45 ecs ÿäre externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.490] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.608] W> set volts not configured for 'vdd-1v8-hs' [0003.609] I> retrieved tmds range from prod_list_hdmi_soc [0003.614] E> invalid display type [0003.615] E> cannot find any other nvdisp nodes [0003.632] I> edid read success [0003.644] I> edid read success [0003.645] I> width = 640, height = 480, frequency = 25174825 [0003.645] I> width = 1920, height = 1080, frequency = 148500000 [0003.645] I> width = 1280, height = 768, frequency = 79500000 [0003.646] I> width = 1360, height = 768, frequency = 85500000 [0003.646] I> width = 720, height = 480, frequency = 26973026 [0003.650] I> width = 720, height = 576, frequency = 26973026 [0003.656] I> width = 1280, height = 720, frequency = 74175824 [0003.661] I> width = 1280, height = 720, frequency = 74175824 [0003.667] I> width = 1920, height = 1080, frequency = 148351648 [0003.673] I> width = 1920, height = 1080, frequency = 148351648 [0003.678] I> width = 720, height = 480, frequency = 26973026 [0003.684] I> width = 720, height = 576, frequency = 26973026 [0003.689] I> width = 3840, height = 2160, frequency = 296703296 [0003.695] I> width = 3840, height = 2160, frequency = 296703296 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 4096, height = 2160, frequency = 296703296 [0003.718] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.729] I> hdmi_enable, starting HDMI initialisation [0003.734] I> hdmi_enable, HDMI initialisation complete [0003.744] initializing target [0003.744] calling apps_init() [0003.745] starting app kernel_boot_app [0003.746] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000663] Console: colour dummy device 80x25 [ 0.002066] printk: console [tty0] enabled [ 0.002128] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002163] pid_max: default: 32768 minimum: 301 [ 0.002387] LSM: Security Framework initializing [ 0.002465] Yama: becoming mindful. [ 0.002506] SELinux: Initializing. [ 0.002685] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002724] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005670] rcu: Hierarchical SRCU implementation. [ 0.005973] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006659] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006712] DTB Build time: Aug 10 2022 20:31:49 [ 0.009346] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009573] Remapping and enabling EFI services. [ 0.011931] smp: Bringing up secondary CPUs ... [ 0.045122] Detected PIPT I-cache on CPU1 [ 0.045215] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.077920] Detected PIPT I-cache on CPU2 [ 0.078065] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.107652] Detected PIPT I-cache on CPU3 [ 0.107786] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.137550] Detected PIPT I-cache on CPU4 [ 0.137701] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.167421] Detected PIPT I-cache on CPU5 [ 0.167574] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.167905] smp: Brought up 1 node, 6 CPUs [ 0.168113] SMP: Total of 6 processors activated. [ 0.168181] CPU features: detected: Privileged Access Never [ 0.168202] CPU features: detected: LSE atomic instructions [ 0.168215] CPU features: detected: User Access Override [ 0.168227] CPU features: detected: 32-bit EL0 Support [ 0.168238] CPU features: detected: RAS Extension Support [ 0.168249] CPU features: detected: CRC32 instructions [ 0.168260] CPU features: detected: 32-bit EL1 Support [ 0.236464] CPU: All CPU(s) started at EL2 [ 0.242667] devtmpfs: initialized [ 0.289489] Registered cp15_barrier emulation handler [ 0.289582] Registered setend emulation handler [ 0.289597] KASLR enabled [ 0.289851] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289874] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291285] pinctrl core: initialized pinctrl subsystem [ 0.292248] SMBIOS 3.0.0 present. [ 0.292278] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292844] NET: Registered protocol family 16 [ 0.294662] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295184] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296108] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296160] audit: initializing netlink subsys (disabled) [ 0.296388] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296823] thermal_sys: Registered thermal governor 'step_wise' [ 0.296829] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296841] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298972] cpuidle: using governor menu [ 0.299304] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299691] ASID allocator initialised with 32768 entries [ 0.299923] Serial: AMBA PL011 UART driver [ 0.302911] Tegra reboot handler registered. [ 0.379628] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.379809] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.379987] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.380044] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.380215] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.380283] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.380403] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.380454] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.380578] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.380645] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.383001] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.383037] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.383067] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.383095] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.383125] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.383152] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.383188] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.383219] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.383335] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.383393] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.383424] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.383452] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.383500] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.383528] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.383556] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.383587] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.383615] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.383720] mc-err: mcerr ops are set to t19x [ 0.395409] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.395431] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.395448] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.395459] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.401833] ACPI: Interpreter disabled. [ 0.403071] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.404440] iommu: Default domain type: Translated [ 0.404503] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.404918] SCSI subsystem initialized [ 0.405087] usbcore: registered new interface driver usbfs [ 0.405127] usbcore: registered new interface driver hub [ 0.405160] usbcore: registered new device driver usb [ 0.405565] mc: Linux media interface: v0.10 [ 0.405591] videodev: Linux video capture interface: v2.00 [ 0.405930] pps_core: LinuxPPS API ver. 1 registered [ 0.405942] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.405963] PTP clock support registered [ 0.406155] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.406481] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.406610] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.407245] Registered efivars operations [ 0.414402] FPGA manager framework [ 0.414503] Advanced Linux Sound Architecture Driver Initialized. [ 0.415123] Bluetooth: Core ver 2.22 [ 0.415162] NET: Registered protocol family 31 [ 0.415172] Bluetooth: HCI device and connection manager initialized [ 0.415204] Bluetooth: HCI socket layer initialized [ 0.415220] Bluetooth: L2CAP socket layer initialized [ 0.415241] Bluetooth: SCO socket layer initialized [ 0.416710] camchar: rtcpu character device driver loaded [ 0.417398] clocksource: Switched to clocksource arch_sys_counter [ 0.723798] VFS: Disk quotas dquot_6.6.0 [ 0.723894] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.724227] pnp: PnP ACPI: disabled [ 0.736698] la/ptsa driver initialized. [ 0.736836] NET: Registered protocol family 2 [ 0.737028] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.742632] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.742798] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.743053] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.743480] TCP: Hash tables configured (established 65536 bind 65536) [ 0.743634] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.743763] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.743948] NET: Registered protocol family 1 [ 0.744816] RPC: Registered named UNIX socket transport module. [ 0.744849] RPC: Registered udp transport module. [ 0.744869] RPC: Registered tcp transport module. [ 0.744888] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.744920] PCI: CLS 0 bytes, default 64 [ 0.745235] Trying to unpack rootfs image as initramfs... [ 1.019238] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.022486] Freeing initrd memory: 8196K [ 1.027246] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.027285] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.027332] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.027740] kvm [1]: IPA Size Limit: 40 bits [ 1.028378] kvm [1]: vgic interrupt IRQ9 [ 1.029004] kvm [1]: VHE mode initialized successfully [ 1.030618] Initialise system trusted keyrings [ 1.030985] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.036865] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.037816] NFS: Registering the id_resolver key type [ 1.037858] Key type id_resolver registered [ 1.037873] Key type id_legacy registered [ 1.037963] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.038026] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.038094] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.049089] NET: Registered protocol family 38 [ 1.049111] Key type asymmetric registered [ 1.049136] Asymmetric key parser 'x509' registered [ 1.049193] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.049417] io scheduler mq-deadline registered [ 1.049433] io scheduler kyber registered [ 1.055240] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.058073] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.058182] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.058284] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.058353] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.058417] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.063803] scrncapt: init (heads:4 wins:6 planes:4) [ 1.063874] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.064850] EINJ: ACPI disabled. [ 1.068147] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.068172] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.068212] tegra-pmc: ### PMC reset level: L1 [ 1.068224] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.068271] tegra-pmc: PMC Prod config success [ 1.073580] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.089420] random: fast init done [ 1.090536] printk: console [ttyTCU0] enabled [ 2.631179] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.635232] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.640012] arm-smmu 10000000.iommu: stage 1 translation [ 2.645304] arm-smmu 10000000.iommu: stage 2 translation [ 2.651043] arm-smmu 10000000.iommu: nested translation [ 2.656384] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.663563] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.675001] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.676663] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.683253] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.691361] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.696545] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.701036] arm-smmu 12000000.iommu: stage 1 translation [ 2.706789] arm-smmu 12000000.iommu: stage 2 translation [ 2.711974] arm-smmu 12000000.iommu: nested translation [ 2.717634] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.724555] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.735819] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.737676] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.744491] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.751964] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.761757] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.764656] tegra_profiler: auth: init [ 2.768910] THERMAL EST: found 3 subdevs [ 2.772337] THERMAL EST num_resources: 0 [ 2.776459] [THERMAL EST subdev 0] [ 2.779754] [THERMAL EST subdev 1] [ 2.782911] [THERMAL EST subdev 2] [ 2.786481] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.792926] THERMAL EST: thz register success. [ 2.797126] THERMAL EST: end of probe, return err: 0 [ 2.802179] nvsciipc: loaded module [ 2.809651] tun: Universal TUN/TAP device driver, 1.6 [ 2.812069] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.817936] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.823527] e1000e: Intel(R) PRO/1000 Network Driver [ 2.828710] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.834774] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.840054] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.846012] PPP generic driver version 2.4.2 [ 2.850269] PPP BSD Compression module registered [ 2.854773] PPP Deflate Compression module registered [ 2.860011] PPP MPPE Compression module registered [ 2.865279] usbcore: registered new interface driver r8152 [ 2.870787] usbcore: registered new interface driver asix [ 2.876137] usbcore: registered new interface driver ax88179_178a [ 2.882250] usbcore: registered new interface driver cdc_ether [ 2.887939] usbcore: registered new interface driver net1080 [ 2.893821] usbcore: registered new interface driver cdc_subset [ 2.899579] usbcore: registered new interface driver zaurus [ 2.905279] usbcore: registered new interface driver cdc_ncm [ 2.910966] usbcore: registered new interface driver aqc111 [ 2.916596] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.922942] ohci-pci: OHCI PCI platform driver [ 2.927230] ohci-platform: OHCI generic platform driver [ 2.933161] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.939191] usbcore: registered new interface driver uas [ 2.943558] usbcore: registered new interface driver usb-storage [ 2.949752] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.955454] mousedev: PS/2 mouse device common for all mice [ 2.960433] usbcore: registered new interface driver xpad [ 2.968668] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.971459] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.979222] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.985779] i2c /dev entries driver [ 2.989079] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.994656] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.000138] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.005663] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.011105] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.016506] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.021863] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.035517] device-mapper: uevent: version 1.0.3 [ 3.035991] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.042810] cpuidle: Initializing cpuidle driver [ 3.046198] sdhci: Secure Digital Host Controller Interface driver [ 3.050773] sdhci: Copyright(c) Pierre Ossman [ 3.055116] Synopsys Designware Multimedia Card Interface Driver [ 3.061315] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.067368] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.068126] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.080599] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.103788] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.113350] vdd-1v0: supplied by regulator-dummy [ 3.118998] vdd-1v8-hs: supplied by regulator-dummy [ 3.123947] vdd-1v8-ls: supplied by regulator-dummy [ 3.128976] vdd-1v8-ao: supplied by regulator-dummy [ 3.132979] vddio-ddr-1v1: supplied by regulator-dummy [ 3.137537] vdd-rtc: supplied by regulator-dummy [ 3.139355] spmic-ldo1: supplied by regulator-dummy [ 3.140674] vdd-ao-3v3: supplied by regulator-dummy [ 3.147027] vddio-emmc-3v3: supplied by regulator-dummy [ 3.153336] spmic-ldo4: supplied by regulator-dummy [ 3.154680] vdd-usb-3v3: supplied by regulator-dummy [ 3.161001] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.167239] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.172925] spmic-ldo8: supplied by vdd-1v8-ls [ 3.174684] gpio-510 (gpio_default): hogged as output/high [ 3.176080] gpio-511 (gpio_default): hogged as output/high [ 3.179072] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.314640] max77686-rtc max77620-rtc: registered as rtc0 [ 3.315690] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.316022] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.155519] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.156734] hid: raw HID events driver (C) Jiri Kosina [ 4.157692] usbcore: registered new interface driver usbhid [ 4.157857] usbhid: USB HID core driver [ 4.159926] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.161062] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.227199] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.301784] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 75.396 ms) ÿá[ 4.245380] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.246186] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.247770] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.249003] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.251623] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.252298] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.252878] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.254846] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.255140] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.257828] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.262211] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.268163] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.273859] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.279934] denver_knobs_init:MTS_VERSION:55637613 [ 4.291563] t19x_cache tegra-cache: probed [ 4.294455] optee: probing for conduit method. [ 4.295293] optee: revision 3.16 (65cc2218) [ 4.296320] optee: dynamic shared memory is enabled [ 4.300682] optee: initialized driver [ 4.306775] nvpmodel: initialized successfully [ 4.308076] tegra_hv: get_hvd: not initialized yet [ 4.312896] user_ivc_mempool: hypervisor not present [ 4.318764] usbcore: registered new interface driver snd-usb-audio [ 4.325373] u32 classifier [ 4.326491] input device check on [ 4.330015] Actions configured [ 4.333933] Initializing XFRM netlink socket [ 4.338868] NET: Registered protocol family 10 [ 4.345767] Segment Routing with IPv6 [ 4.345980] NET: Registered protocol family 17 [ 4.350445] NET: Registered protocol family 15 [ 4.354595] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.368174] Bluetooth: RFCOMM socket layer initialized [ 4.372868] Bluetooth: RFCOMM ver 1.11 [ 4.377003] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.382620] Bluetooth: HIDP socket layer initialized [ 4.388543] 9pnet: Installing 9P2000 support [ 4.392079] Key type dns_resolver registered [ 4.397977] registered taskstats version 1 [ 4.400748] Loading compiled-in X.509 certificates [ 4.413866] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.416466] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.426976] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.428648] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.437032] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.445648] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.561565] tegra194-pcie 14160000.pcie: Link up [ 4.564551] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.564807] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.565021] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.565277] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.565516] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.565881] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.566357] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.579497] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.580018] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.580551] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.582309] pci 0004:01:00.0: supports D1 D2 [ 4.582496] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.593189] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.593562] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.593834] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.594234] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.594550] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.594735] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.596335] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.603803] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.612026] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.622478] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.626718] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.632304] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.639373] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.648419] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.650332] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.658476] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.667187] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.781948] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.782674] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.782876] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.783048] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.783325] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.783515] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.783927] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.784356] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.799781] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.800045] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.801893] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.803149] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.804313] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.805619] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.806563] pci 0005:00:00.0: Removing from iommu group 7 [ 5.806800] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.836309] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.857674] host1x 13e10000.host1x: initialized [ 5.859076] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.860008] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.861251] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.862020] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.863000] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.863571] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.864485] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.865324] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.875360] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.882427] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.892059] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.899003] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.908856] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.915937] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.926076] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.932969] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.942923] falcon 15340000.vic: Adding to iommu group 17 [ 5.957315] falcon 15340000.vic: initialized [ 5.958325] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.964124] falcon 15380000.nvjpg: initialized [ 5.964769] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.975702] falcon 154c0000.nvenc: initialized [ 5.976232] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.985864] falcon 15a80000.nvenc1: initialized [ 5.986516] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.998748] nvdec 15480000.nvdec: initialized [ 5.999379] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.008999] nvdec 15140000.nvdec1: initialized [ 6.009746] tsec 15500000.tsec: Adding to iommu group 18 [ 6.014877] tsec 15500000.tsec: initialized [ 6.015406] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.022886] tsec 15100000.tsecb: initialized [ 6.026736] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.052760] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.064703] gpio-374 (wifi-enable): hogged as output/high [ 6.065012] gpio-431 (camera-control-output-low): hogged as output/low [ 6.065256] gpio-432 (camera-control-output-low): hogged as output/low [ 6.066867] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.068550] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.069041] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.074122] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.079455] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.085089] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.090561] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.099155] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.106330] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.118340] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.123428] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.129362] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.137881] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.147236] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.154711] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.162224] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.168166] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.178070] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.184048] pva 16000000.pva0: Adding to iommu group 22 [ 6.210360] pva 16000000.pva0: initialized [ 6.215893] pva 16800000.pva1: Adding to iommu group 23 [ 6.227307] pva 16800000.pva1: initialized [ 6.231957] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.245671] nvdla 15880000.nvdla0: initialized [ 6.246981] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.255607] nvdla 158c0000.nvdla1: initialized [ 6.259389] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.259636] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.259678] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.260175] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.260405] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.260447] tegradc 15200000.display: Adding to iommu group 26 [ 6.260517] tegradccommon 15200000.display-hub: dma mapping done [ 6.261288] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.270469] tegradc 15210000.display: Adding to iommu group 26 [ 6.270753] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.270935] generic_infoframe_type: 0x87 [ 6.271056] tegradc 15200000.display: DT parsed successfully [ 6.271155] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.274125] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.276231] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.276244] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.276250] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.277230] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.277239] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.278855] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.282226] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.286211] tegra_cec 3960000.tegra_cec: probed [ 6.290880] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.297375] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.305957] tegradc 15210000.display: disp0 connected to head1->sor [ 6.312073] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.318337] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.326774] kfuse 3830000.kfuse: initialized [ 6.334429] tegradc 15210000.display: DT parsed successfully [ 6.340631] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.346006] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.426143] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.433238] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.439216] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.448859] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.454205] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.463811] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.469046] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.489208] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.489723] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.491772] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.500225] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.508697] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.515505] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.522830] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.529982] usb usb1: Product: xHCI Host Controller [ 6.535229] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.541567] usb usb1: SerialNumber: 3610000.xhci [ 6.547305] hub 1-0:1.0: USB hub found [ 6.549030] random: crng init done [ 6.550356] hub 1-0:1.0: 4 ports detected [ 6.557899] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.562663] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.570510] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.578155] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.586117] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.593308] usb usb2: Product: xHCI Host Controller [ 6.597942] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.604168] usb usb2: SerialNumber: 3610000.xhci [ 6.609697] hub 2-0:1.0: USB hub found [ 6.612853] hub 2-0:1.0: 4 ports detected [ 6.653931] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.659723] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.661086] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.661312] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.674241] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.675285] tegra194-cpufreq ccplex: probed with BWMGR [ 6.676599] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.677158] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.677652] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.678846] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.687835] mmc0: CQHCI version 5.10 [ 6.689839] tegra194-vi5 15c10000.vi: initialized [ 6.691692] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.693056] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.696877] generic_infoframe_type: 0x87 [ 6.703326] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.706790] tegradc 15200000.display: DT parsed successfully [ 6.714881] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.720700] tegradc 15200000.display: Display dc.0000000087e0d0af registered with id=0 [ 6.726934] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.726939] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.726944] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.755534] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.761454] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.761463] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.769438] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.769442] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.784581] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.788606] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.792417] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.798398] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.798595] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.807792] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.814746] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.830441] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.837623] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.847699] tegradc 15200000.display: probed [ 6.864304] nvethernet 2490000.ethernet: Macsec not supported [ 6.871176] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.879563] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.883830] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.890768] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.898733] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.904225] Console: switching to colour frame buffer device 240x67 [ 6.910120] tegradc 15200000.display: fb registered [ 6.915139] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.921816] tegra-se-nvhost 15810000.se: initialized [ 6.922061] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.935617] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.936448] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.944316] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.951968] tegra-se-nvhost 15820000.se: initialized [ 6.956018] mmc0: Command Queue Engine enabled [ 6.956701] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.959341] mmc0: periodic cache flush enabled [ 6.965771] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.969732] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.976528] tegra-se-nvhost 15830000.se: initialized [ 6.983344] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.988522] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.992501] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.998404] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.999211] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.999471] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.999480] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.000091] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.000095] Extcon AUX1(HDMI) enable [ 7.000226] tegradc 15210000.display: disp1 connected to head1->sor [ 7.000414] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.000487] tegradc 15210000.display: DT parsed successfully [ 7.000521] tegradc 15210000.display: Display dc.000000002da5c3b0 registered with id=1 [ 7.000610] tegradc 15210000.display: vblank syncpt # 16 for dc 1 [ 7.000616] tegradc 15210000.display: vpulse3 syncpt # 17 for dc 1 [ 7.007322] tegradc 15210000.display: probed [ 7.015599] tegra-se-nvhost 15840000.se: initialized [ 7.043767] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.049331] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.074369] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.081832] tegra_actmon d230000.actmon: in actmon_register()... [ 7.086587] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.131975] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.131981] tegradc 15210000.display: fb registered [ 7.141181] usb 1-2: Manufacturer: Generic [ 7.144589] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.144821] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.144826] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.144833] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.147223] hub 1-2:1.0: USB hub found [ 7.151070] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.159214] hub 1-2:1.0: 4 ports detected [ 7.169575] hvc_sysfs: hypervisor is not present [ 7.174325] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.199565] tegradc 15210000.display: blank - powerdown [ 7.204459] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.212937] Extcon DP: HPD disabled [ 7.216598] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.223210] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.229291] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.237989] ALSA device list: [ 7.239542] No soundcards found. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.242786] tegradc 15200000.display: blank - powerdown [ 7.243771] Freeing unused kernel memory: 3968K [ 7.243870] Run /init as init process [ 7.250525] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.250534] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.250538] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.250542] usb 2-3: Manufacturer: Generic [ 7.261314] hub 2-3:1.0: USB hub found [ 7.263087] hub 2-3:1.0: 4 ports detected [ 7.282159] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.282165] Extcon AUX1(HDMI) disable [ 7.297431] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.297437] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.305479] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.306310] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.318648] tegradc 15200000.display: unblank [ 7.319705] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.319902] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.325785] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.327738] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.331799] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.331802] Extcon AUX1(HDMI) enable [ 7.344521] tegradc 15200000.display: sync windows ret = 247 [ 7.369439] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.391877] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.398762] Extcon HDMI: HPD enabled [ 7.402682] tegradc 15200000.display: hdmi: plugged [ 7.443160] Root device found: mmcblk0p1 [ 7.446673] Found dev node: /dev/mmcblk0p1 [ 7.483601] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.488994] Rootfs mounted over mmcblk0p1 [ 7.529252] Switching from initrd to actual rootfs [ 7.542809] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.544246] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.545625] usb 1-3: Product: Bluetooth Radio [ 7.546906] usb 1-3: Manufacturer: Realtek [ 7.548174] usb 1-3: SerialNumber: 00e04c000001 [ 7.671194] systemd[1]: System time before build time, advancing clock. [ 7.743122] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.748019] systemd[1]: Detected architecture arm64. [ 7.789364] systemd[1]: Set hostname to . [ 7.954418] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.302427] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.304167] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.309819] systemd[1]: Created slice system-modprobe.slice. [ 8.314693] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.318949] systemd[1]: Created slice User and Session Slice. [ 8.322449] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.326603] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.329927] systemd[1]: Reached target User and Group Name Lookups. [ 8.333055] systemd[1]: Reached target Slices. [ 8.336136] systemd[1]: Reached target Swap. [ 8.340091] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.343649] systemd[1]: Listening on Syslog Socket. [ 8.347173] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.350494] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.354843] systemd[1]: Listening on Journal Audit Socket. [ 8.358523] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.362464] systemd[1]: Listening on Journal Socket. [ 8.366209] systemd[1]: Listening on udev Control Socket. [ 8.369800] systemd[1]: Listening on udev Kernel Socket. [ 8.378208] systemd[1]: Mounting Huge Pages File System... [ 8.386806] systemd[1]: Mounting POSIX Message Queue File System... [ 8.397717] systemd[1]: Mounting RPC Pipe File System... [ 8.408998] systemd[1]: Mounting Kernel Debug File System... [ 8.418955] systemd[1]: Mounting Kernel Trace File System... [ 8.430324] systemd[1]: Starting Journal Service... [ 8.439043] systemd[1]: Starting Set the console keyboard layout... [ 8.447514] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.451208] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.457822] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.465947] systemd[1]: Started Nameserver information manager. [ 8.471007] systemd[1]: Reached target Network (Pre). [ 8.478525] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.480370] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.486671] systemd[1]: Starting Load Kernel Modules... [ 8.494714] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.502442] systemd[1]: Starting udev Coldplug all Devices... [ 8.513705] systemd[1]: Mounted Huge Pages File System. [ 8.517491] systemd[1]: Mounted POSIX Message Queue File System. [ 8.521581] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.522223] systemd[1]: Mounted RPC Pipe File System. [ 8.528498] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.529237] systemd[1]: Mounted Kernel Debug File System. [ 8.531708] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.533270] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.534874] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.534886] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.538050] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.538285] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.538457] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.538466] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.546168] systemd[1]: Mounted Kernel Trace File System. [ 8.553560] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.558614] systemd[1]: nvfb-udev.service: Succeeded. [ 8.562967] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.574445] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.587067] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.588900] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.596159] systemd[1]: Starting Load/Save Random Seed... [ 8.605361] systemd[1]: Starting Create System Users... [ 8.631047] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.631047] [ 8.663096] systemd[1]: Finished Load/Save Random Seed. [ 8.675954] systemd[1]: Finished Load Kernel Modules. [ 8.682460] systemd[1]: Finished Create System Users. [ 8.687004] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.693628] systemd[1]: Mounting Kernel Configuration File System... [ 8.702197] systemd[1]: Started OP-TEE Client Supplicant. [ 8.710773] systemd[1]: Starting Apply Kernel Variables... [ 8.719560] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.729338] systemd[1]: Finished Set the console keyboard layout. [ 8.736165] systemd[1]: Mounted Kernel Configuration File System. [ 10.168455] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.175293] imx219 9-0010: board setup failed [ 10.176743] imx219: probe of 9-0010 failed with error -121 [ 10.190901] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.198368] imx219 10-0010: board setup failed [ 10.199801] imx219: probe of 10-0010 failed with error -121 [ 10.449918] hot-surface-alert cooling state: 0 -> 1 [ 10.712492] using random self ethernet address [ 10.741029] using random host ethernet address [ 11.879893] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.881247] Creating 1 MTD partitions on "spi6.0": [ 11.882616] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.321354] using random self ethernet address [ 12.323239] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.835238] nvidia: loading out-of-tree module taints kernel. [ 58.359060] watchdog: watchdog0: watchdog did not stop! [ 58.813700] Trying to unregister non-registered hwtime source [ 61.871802] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.873348] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [Åÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.067] I> Boot-device: QSPI (instance: 0) [0000.071] I> Qspi flash params source = brbct [0000.075] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.101] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.114] W> Skipping boost for clk: BPMP_APB [0000.118] W> Skipping boost for clk: AXI_CBB [0000.122] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.130] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.917] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.924] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.307] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.342] W> Cannot find any partition table for 00000003 [0001.343] > PARTITION_MANAGER: Failed to publish partition. [0001.359] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.360] I> Active Boot chain : 0 [0002.031] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.466] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.489] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.633] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.646] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.647] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.685] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.745] initializing target [0003.746] calling apps_init() [0003.746] starting app kernel_boot_app [0003.747] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000633] Console: colour dummy device 80x25 [ 0.002067] printk: console [tty0] enabled [ 0.002133] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002167] pid_max: default: 32768 minimum: 301 [ 0.002332] LSM: Security Framework initializing [ 0.002390] Yama: becoming mindful. [ 0.002432] SELinux: Initializing. [ 0.002574] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002610] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005417] rcu: Hierarchical SRCU implementation. [ 0.005651] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006468] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006525] DTB Build time: Aug 10 2022 20:31:49 [ 0.009458] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009744] Remapping and enabling EFI services. [ 0.011619] smp: Bringing up secondary CPUs ... [ 0.041104] Detected PIPT I-cache on CPU1 [ 0.041193] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071054] Detected PIPT I-cache on CPU2 [ 0.071203] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100815] Detected PIPT I-cache on CPU3 [ 0.100948] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130637] Detected PIPT I-cache on CPU4 [ 0.130801] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160617] Detected PIPT I-cache on CPU5 [ 0.160768] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161162] smp: Brought up 1 node, 6 CPUs [ 0.161467] SMP: Total of 6 processors activated. [ 0.161521] CPU features: detected: Privileged Access Never [ 0.161553] CPU features: detected: LSE atomic instructions [ 0.161577] CPU features: detected: User Access Override [ 0.161601] CPU features: detected: 32-bit EL0 Support [ 0.161623] CPU features: detected: RAS Extension Support [ 0.161646] CPU features: detected: CRC32 instructions [ 0.161669] CPU features: detected: 32-bit EL1 Support [ 0.230483] CPU: All CPU(s) started at EL2 [ 0.236623] devtmpfs: initialized [ 0.306221] Registered cp15_barrier emulation handler [ 0.306340] Registered setend emulation handler [ 0.306381] KASLR enabled [ 0.306717] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.306795] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.309016] pinctrl core: initialized pinctrl subsystem [ 0.310428] SMBIOS 3.0.0 present. [ 0.310498] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.311380] NET: Registered protocol family 16 [ 0.314018] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.314844] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.316000] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.316106] audit: initializing netlink subsys (disabled) [ 0.316489] audit: type=2000 audit(0.312:1): state=initialized audit_enabled=0 res=1 [ 0.317035] thermal_sys: Registered thermal governor 'step_wise' [ 0.317047] thermal_sys: Registered thermal governor 'power_allocator' [ 0.317070] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.320420] cpuidle: using governor menu [ 0.320893] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.321358] ASID allocator initialised with 32768 entries [ 0.321720] Serial: AMBA PL011 UART driver [ 0.325079] Tegra reboot handler registered. [ 0.388194] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.388325] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.388604] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.388649] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.388807] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.388854] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.388964] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.389006] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.389117] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.389159] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.391797] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.391831] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.391875] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.391904] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.391944] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.391979] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.392009] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.392035] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.392059] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.392084] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.392108] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.392131] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.392155] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.392179] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.392203] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.392226] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.392250] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.392355] mc-err: mcerr ops are set to t19x [ 0.404047] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.404080] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.404094] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.404106] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.411186] ACPI: Interpreter disabled. [ 0.412336] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.413467] iommu: Default domain type: Translated [ 0.413538] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.413921] SCSI subsystem initialized [ 0.414073] usbcore: registered new interface driver usbfs [ 0.414112] usbcore: registered new interface driver hub [ 0.414144] usbcore: registered new device driver usb [ 0.414559] mc: Linux media interface: v0.10 [ 0.414590] videodev: Linux video capture interface: v2.00 [ 0.414996] pps_core: LinuxPPS API ver. 1 registered [ 0.415009] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.415029] PTP clock support registered [ 0.415245] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.415537] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.415628] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.416190] Registered efivars operations [ 0.421906] FPGA manager framework [ 0.422021] Advanced Linux Sound Architecture Driver Initialized. [ 0.422615] Bluetooth: Core ver 2.22 [ 0.422669] NET: Registered protocol family 31 [ 0.422681] Bluetooth: HCI device and connection manager initialized [ 0.422697] Bluetooth: HCI socket layer initialized [ 0.422715] Bluetooth: L2CAP socket layer initialized [ 0.422788] Bluetooth: SCO socket layer initialized [ 0.424088] camchar: rtcpu character device driver loaded [ 0.424787] clocksource: Switched to clocksource arch_sys_counter [ 0.705038] VFS: Disk quotas dquot_6.6.0 [ 0.705132] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.705566] pnp: PnP ACPI: disabled [ 0.715475] la/ptsa driver initialized. [ 0.715610] NET: Registered protocol family 2 [ 0.715802] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.721074] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.721140] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.721460] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.721892] TCP: Hash tables configured (established 65536 bind 65536) [ 0.722012] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722104] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722323] NET: Registered protocol family 1 [ 0.722962] RPC: Registered named UNIX socket transport module. [ 0.722976] RPC: Registered udp transport module. [ 0.722986] RPC: Registered tcp transport module. [ 0.722996] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.723012] PCI: CLS 0 bytes, default 64 [ 0.723217] Trying to unpack rootfs image as initramfs... [ 0.909731] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.911819] Freeing initrd memory: 8196K [ 0.915398] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.915435] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.915475] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.915874] kvm [1]: IPA Size Limit: 40 bits [ 0.916456] kvm [1]: vgic interrupt IRQ9 [ 0.917048] kvm [1]: VHE mode initialized successfully [ 0.918514] Initialise system trusted keyrings [ 0.918860] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.924535] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.925441] NFS: Registering the id_resolver key type [ 0.925479] Key type id_resolver registered [ 0.925495] Key type id_legacy registered [ 0.925580] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.925604] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.925648] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.935296] NET: Registered protocol family 38 [ 0.935325] Key type asymmetric registered [ 0.935340] Asymmetric key parser 'x509' registered [ 0.935393] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.935687] io scheduler mq-deadline registered [ 0.935707] io scheduler kyber registered [ 0.941632] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.944832] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.944915] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.944986] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.945083] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.945182] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.950602] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.950774] scrncapt: init (heads:4 wins:6 planes:4) [ 0.951815] EINJ: ACPI disabled. [ 0.954844] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.954869] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.954885] tegra-pmc: ### PMC reset level: L1 [ 0.954900] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.954956] tegra-pmc: PMC Prod config success [ 0.960068] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.965181] random: fast init done [ 0.965888] printk: console [ttyTCU0] enabled [ 2.517705] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.521826] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.526414] arm-smmu 10000000.iommu: stage 1 translation [ 2.532272] arm-smmu 10000000.iommu: stage 2 translation [ 2.537385] arm-smmu 10000000.iommu: nested translation [ 2.542978] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.550155] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.560572] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.563277] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.569604] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.577579] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.582877] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.587632] arm-smmu 12000000.iommu: stage 1 translation [ 2.593110] arm-smmu 12000000.iommu: stage 2 translation [ 2.598279] arm-smmu 12000000.iommu: nested translation [ 2.603987] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.611145] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.621339] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.624247] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.630824] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.637974] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.647936] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.651232] tegra_profiler: auth: init [ 2.655510] THERMAL EST: found 3 subdevs [ 2.658662] THERMAL EST num_resources: 0 [ 2.662761] [THERMAL EST subdev 0] [ 2.665847] [THERMAL EST subdev 1] [ 2.669500] [THERMAL EST subdev 2] [ 2.672468] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.678976] THERMAL EST: thz register success. [ 2.683210] THERMAL EST: end of probe, return err: 0 [ 2.688721] nvsciipc: loaded module [ 2.695683] tun: Universal TUN/TAP device driver, 1.6 [ 2.698085] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.704261] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.710091] e1000e: Intel(R) PRO/1000 Network Driver [ 2.714748] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.721085] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.726377] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.732570] PPP generic driver version 2.4.2 [ 2.736592] PPP BSD Compression module registered [ 2.741120] PPP Deflate Compression module registered [ 2.746342] PPP MPPE Compression module registered [ 2.751359] usbcore: registered new interface driver r8152 [ 2.757134] usbcore: registered new interface driver asix [ 2.762208] usbcore: registered new interface driver ax88179_178a [ 2.768323] usbcore: registered new interface driver cdc_ether [ 2.774278] usbcore: registered new interface driver net1080 [ 2.779881] usbcore: registered new interface driver cdc_subset [ 2.786237] usbcore: registered new interface driver zaurus [ 2.791873] usbcore: registered new interface driver cdc_ncm [ 2.797327] usbcore: registered new interface driver aqc111 [ 2.802932] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.809275] ohci-pci: OHCI PCI platform driver [ 2.813554] ohci-platform: OHCI generic platform driver [ 2.819369] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.825540] usbcore: registered new interface driver uas [ 2.829606] usbcore: registered new interface driver usb-storage [ 2.835727] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.841692] mousedev: PS/2 mouse device common for all mice [ 2.846791] usbcore: registered new interface driver xpad [ 2.854958] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.857754] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.865274] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.871858] i2c /dev entries driver [ 2.875150] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.880971] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.886287] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.891720] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.896997] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.902521] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.908226] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.921880] device-mapper: uevent: version 1.0.3 [ 2.922397] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.928573] cpuidle: Initializing cpuidle driver [ 2.932663] sdhci: Secure Digital Host Controller Interface driver [ 2.937358] sdhci: Copyright(c) Pierre Ossman [ 2.941453] Synopsys Designware Multimedia Card Interface Driver [ 2.947658] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.953375] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.954215] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.966568] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.988593] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.998207] vdd-1v0: supplied by regulator-dummy [ 3.003699] vdd-1v8-hs: supplied by regulator-dummy [ 3.008524] vdd-1v8-ls: supplied by regulator-dummy [ 3.013552] vdd-1v8-ao: supplied by regulator-dummy [ 3.017466] vddio-ddr-1v1: supplied by regulator-dummy [ 3.022002] vdd-rtc: supplied by regulator-dummy [ 3.023778] spmic-ldo1: supplied by regulator-dummy [ 3.025101] vdd-ao-3v3: supplied by regulator-dummy [ 3.031249] vddio-emmc-3v3: supplied by regulator-dummy [ 3.037610] spmic-ldo4: supplied by regulator-dummy [ 3.038910] vdd-usb-3v3: supplied by regulator-dummy [ 3.045205] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.051377] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.057061] spmic-ldo8: supplied by vdd-1v8-ls [ 3.058627] gpio-510 (gpio_default): hogged as output/high [ 3.059987] gpio-511 (gpio_default): hogged as output/high [ 3.062973] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.199971] max77686-rtc max77620-rtc: registered as rtc0 [ 3.201348] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.201702] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.050146] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.051441] hid: raw HID events driver (C) Jiri Kosina [ 4.052344] usbcore: registered new interface driver usbhid [ 4.052526] usbhid: USB HID core driver [ 4.055006] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.056327] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.855174] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.928852] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 74.485 ms) ÿá[ 4.140056] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.140655] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.141639] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.142571] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.144251] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.145013] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.145711] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.147133] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.147510] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.150262] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.156586] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.163208] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.167972] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.174228] denver_knobs_init:MTS_VERSION:55637613 [ 4.189297] t19x_cache tegra-cache: probed [ 4.194016] optee: probing for conduit method. [ 4.194830] optee: revision 3.16 (65cc2218) [ 4.195773] optee: dynamic shared memory is enabled [ 4.197083] optee: initialized driver [ 4.202526] nvpmodel: initialized successfully [ 4.203079] tegra_hv: get_hvd: not initialized yet [ 4.207236] user_ivc_mempool: hypervisor not present [ 4.213721] usbcore: registered new interface driver snd-usb-audio [ 4.219973] u32 classifier [ 4.221278] input device check on [ 4.224919] Actions configured [ 4.228408] Initializing XFRM netlink socket [ 4.233208] NET: Registered protocol family 10 [ 4.239572] Segment Routing with IPv6 [ 4.240912] NET: Registered protocol family 17 [ 4.244862] NET: Registered protocol family 15 [ 4.249930] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.263137] Bluetooth: RFCOMM socket layer initialized [ 4.267780] Bluetooth: RFCOMM ver 1.11 [ 4.271408] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.277576] Bluetooth: HIDP socket layer initialized [ 4.283498] 9pnet: Installing 9P2000 support [ 4.286798] Key type dns_resolver registered [ 4.292417] registered taskstats version 1 [ 4.295144] Loading compiled-in X.509 certificates [ 4.308891] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.311304] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.320940] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.323045] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.331898] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.340010] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.456855] tegra194-pcie 14160000.pcie: Link up [ 4.459850] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.460135] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.460331] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.460646] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.460878] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.461486] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.462091] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.474572] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.474954] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.475464] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.477237] pci 0004:01:00.0: supports D1 D2 [ 4.477384] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.489338] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.489619] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.489965] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.490544] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.490842] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.491042] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.491451] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.498885] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.507344] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.517943] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.522481] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.527631] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.534681] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.544044] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.545530] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.553803] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.562218] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.677500] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.678400] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.678700] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.679040] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.679406] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.679581] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.680080] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.680615] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.699330] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.699628] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.701988] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.703351] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.705250] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.706919] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.707860] pci 0005:00:00.0: Removing from iommu group 7 [ 5.708184] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.744124] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.769021] host1x 13e10000.host1x: initialized [ 5.770905] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.771902] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.773424] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.774135] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.775450] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.776143] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.777451] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.778142] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.779104] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.779693] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.787468] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.794562] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.804263] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.811417] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.821272] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.828717] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.838437] falcon 15340000.vic: Adding to iommu group 17 [ 5.853734] falcon 15340000.vic: initialized [ 5.854940] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.861627] falcon 15380000.nvjpg: initialized [ 5.862323] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.871561] falcon 154c0000.nvenc: initialized [ 5.872069] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.881192] falcon 15a80000.nvenc1: initialized [ 5.881724] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.894361] nvdec 15480000.nvdec: initialized [ 5.895043] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.905269] nvdec 15140000.nvdec1: initialized [ 5.905734] tsec 15500000.tsec: Adding to iommu group 18 [ 5.912148] tsec 15500000.tsec: initialized [ 5.912572] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.918475] tsec 15100000.tsecb: initialized [ 5.922761] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.950615] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.964623] gpio-374 (wifi-enable): hogged as output/high [ 5.965051] gpio-431 (camera-control-output-low): hogged as output/low [ 5.965406] gpio-432 (camera-control-output-low): hogged as output/low [ 5.967050] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.969370] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.969934] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.971547] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.974916] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.981028] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.986544] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.994859] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.001997] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.013560] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.018732] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.024806] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.033613] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.042572] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.049932] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.057535] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.063913] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.073293] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.079532] pva 16000000.pva0: Adding to iommu group 22 [ 6.107278] pva 16000000.pva0: initialized [ 6.111881] pva 16800000.pva1: Adding to iommu group 23 [ 6.131615] pva 16800000.pva1: initialized [ 6.135523] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.148577] nvdla 15880000.nvdla0: initialized [ 6.150203] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.166908] nvdla 158c0000.nvdla1: initialized [ 6.169600] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.169818] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.169888] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.170418] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.170463] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.171121] tegradc 15200000.display: Adding to iommu group 26 [ 6.171134] tegradccommon 15200000.display-hub: dma mapping done [ 6.171165] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.171893] random: crng init done [ 6.173295] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.178082] tegra_cec 3960000.tegra_cec: probed [ 6.180171] tegradc 15210000.display: Adding to iommu group 26 [ 6.180671] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.181011] generic_infoframe_type: 0x87 [ 6.181118] tegradc 15200000.display: DT parsed successfully [ 6.181235] tegradc 15200000.display: Display dc.00000000a92e143d registered with id=0 [ 6.183878] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.190503] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.197913] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.199249] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.205434] kfuse 3830000.kfuse: initialized [ 6.212898] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.219300] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.228071] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.233647] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.234378] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.241938] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.243536] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.247458] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.258131] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.262778] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.267454] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.274078] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.281466] tegradc 15210000.display: disp0 connected to head1->sor [ 6.287065] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.296725] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.306034] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.312458] tegradc 15210000.display: DT parsed successfully [ 6.331311] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.333881] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.339932] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.339979] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.399021] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.407443] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.414537] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.422030] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.429171] usb usb1: Product: xHCI Host Controller [ 6.433895] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.440106] usb usb1: SerialNumber: 3610000.xhci [ 6.445785] hub 1-0:1.0: USB hub found [ 6.448956] hub 1-0:1.0: 4 ports detected [ 6.453645] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.458159] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.466025] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.473878] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.481598] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.488845] usb usb2: Product: xHCI Host Controller [ 6.493569] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.499780] usb usb2: SerialNumber: 3610000.xhci [ 6.505253] hub 2-0:1.0: USB hub found [ 6.508214] hub 2-0:1.0: 4 ports detected [ 6.550709] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.557468] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.558950] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.559187] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.572808] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.573927] tegra194-cpufreq ccplex: probed with BWMGR [ 6.575322] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.575749] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.576189] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.577435] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.582933] tegra194-vi5 15c10000.vi: initialized [ 6.584308] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.586589] mmc0: CQHCI version 5.10 [ 6.586771] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.587034] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.587041] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.587048] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.587052] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.587056] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.588448] generic_infoframe_type: 0x87 [ 6.596828] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.598603] tegradc 15200000.display: DT parsed successfully [ 6.606733] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.612861] tegradc 15200000.display: Display dc.000000004280d442 registered with id=0 [ 6.643149] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.648704] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.655513] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.655517] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.655884] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.660783] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.664641] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.671533] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.671737] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.687934] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.695006] nvethernet 2490000.ethernet: Macsec not supported [ 6.700927] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.702954] tegradc 15200000.display: probed [ 6.710158] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.720823] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.724183] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.752770] mmc0: Command Queue Engine enabled [ 6.754372] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.758586] mmc0: periodic cache flush enabled [ 6.758604] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.766680] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.774097] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.780370] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.783643] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.792519] tegra-se-nvhost 15810000.se: initialized [ 6.806603] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.813468] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.846120] Console: switching to colour frame buffer device 240x67 [ 6.846255] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.851795] tegradc 15200000.display: fb registered [ 6.851875] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.859020] tegra-se-nvhost 15820000.se: initialized [ 6.863956] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.870361] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.873808] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.880063] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.898488] tegra-se-nvhost 15830000.se: initialized [ 6.903927] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.904675] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.909916] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.917575] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.917580] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.917584] usb 1-2: Manufacturer: Generic [ 6.919725] hub 1-2:1.0: USB hub found [ 6.924706] tegra-se-nvhost 15840000.se: initialized [ 6.932136] hub 1-2:1.0: 4 ports detected [ 6.937205] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.950336] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.954371] tegra_actmon d230000.actmon: in actmon_register()... [ 6.974655] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.974780] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.981634] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.995252] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.995331] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.001754] Extcon AUX1(HDMI) enable [ 7.001866] tegradc 15210000.display: disp1 connected to head1->sor [ 7.010373] hvc_sysfs: hypervisor is not present [ 7.013474] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.025694] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.031157] tegradc 15210000.display: DT parsed successfully [ 7.044445] tegradc 15210000.display: Display dc.000000004cf6f07d registered with id=1 [ 7.044850] ALSA device list: [ 7.055642] No soundcards found. [ 7.055773] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.065476] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.078287] tegradc 15210000.display: probed [ 7.078723] tegradc 15210000.display: fb registered [ 7.079641] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.084333] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.089339] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.089344] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.089349] usb 2-3: Manufacturer: Generic [ 7.091687] Freeing unused kernel memory: 3968K [ 7.096605] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.096617] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.130609] tegradc 15210000.display: blank - powerdown [ 7.135137] hub 2-3:1.0: USB hub found [ 7.135656] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.136908] Run /init as init process [ 7.141619] hub 2-3:1.0: 4 ports detected [ 7.147360] Extcon DP: HPD disabled [ 7.147367] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.147381] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.171507] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.178588] tegradc 15200000.display: blank - powerdown [ 7.196769] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.200814] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.217478] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.217483] Extcon AUX1(HDMI) disable [ 7.229629] Root device found: mmcblk0p1 [ 7.231707] Found dev node: /dev/mmcblk0p1 [ 7.241215] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.242256] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.255966] tegradc 15200000.display: unblank [ 7.257258] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.257462] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.263720] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.265356] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.265361] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.265641] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.267808] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.269735] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.269739] Extcon AUX1(HDMI) enable [ 7.272038] Rootfs mounted over mmcblk0p1 [ 7.282417] tegradc 15200000.display: sync windows ret = 247 [ 7.301785] Switching from initrd to actual rootfs [ 7.320581] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.327840] Extcon HDMI: HPD enabled [ 7.331505] tegradc 15200000.display: hdmi: plugged [ 7.358031] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.359431] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.360809] usb 1-3: Product: Bluetooth Radio [ 7.362092] usb 1-3: Manufacturer: Realtek [ 7.363334] usb 1-3: SerialNumber: 00e04c000001 [ 7.472244] systemd[1]: System time before build time, advancing clock. [ 7.543567] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.548374] systemd[1]: Detected architecture arm64. [ 7.607811] systemd[1]: Set hostname to . [ 7.769977] systemd-sysv-generator[248]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.115289] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.117029] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.122620] systemd[1]: Created slice system-modprobe.slice. [ 8.127294] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.131355] systemd[1]: Created slice User and Session Slice. [ 8.134818] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.138844] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.142124] systemd[1]: Reached target User and Group Name Lookups. [ 8.145229] systemd[1]: Reached target Slices. [ 8.148144] systemd[1]: Reached target Swap. [ 8.151931] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.155419] systemd[1]: Listening on Syslog Socket. [ 8.158816] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.162088] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.166173] systemd[1]: Listening on Journal Audit Socket. [ 8.169630] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.173255] systemd[1]: Listening on Journal Socket. [ 8.176846] systemd[1]: Listening on udev Control Socket. [ 8.181560] systemd[1]: Listening on udev Kernel Socket. [ 8.191413] systemd[1]: Mounting Huge Pages File System... [ 8.199593] systemd[1]: Mounting POSIX Message Queue File System... [ 8.207611] systemd[1]: Mounting RPC Pipe File System... [ 8.216242] systemd[1]: Mounting Kernel Debug File System... [ 8.224876] systemd[1]: Mounting Kernel Trace File System... [ 8.234949] systemd[1]: Starting Journal Service... [ 8.243885] systemd[1]: Starting Set the console keyboard layout... [ 8.252092] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.255669] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.262259] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.270356] systemd[1]: Started Nameserver information manager. [ 8.274947] systemd[1]: Reached target Network (Pre). [ 8.281806] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.283944] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.290447] systemd[1]: Starting Load Kernel Modules... [ 8.298517] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.307352] systemd[1]: Starting udev Coldplug all Devices... [ 8.318128] systemd[1]: Mounted Huge Pages File System. [ 8.321924] systemd[1]: Mounted POSIX Message Queue File System. [ 8.326408] systemd[1]: Mounted RPC Pipe File System. [ 8.329366] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.329982] systemd[1]: Mounted Kernel Debug File System. [ 8.333846] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.334258] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.334263] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.334272] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.334275] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.334659] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.334823] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.334831] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.335226] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.355219] systemd[1]: Mounted Kernel Trace File System. [ 8.363858] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.369025] systemd[1]: nvfb-udev.service: Succeeded. [ 8.373826] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.387933] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.400671] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.402737] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.409380] systemd[1]: Starting Load/Save Random Seed... [ 8.417928] systemd[1]: Starting Create System Users... [ 8.427247] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.427247] [ 8.475215] systemd[1]: Finished Load/Save Random Seed. [ 8.483319] systemd[1]: Finished Load Kernel Modules. [ 8.494850] systemd[1]: Finished Create System Users. [ 8.499797] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.506606] systemd[1]: Mounting Kernel Configuration File System... [ 8.514725] systemd[1]: Started OP-TEE Client Supplicant. [ 8.522946] systemd[1]: Starting Apply Kernel Variables... [ 8.530667] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.540891] systemd[1]: Finished Set the console keyboard layout. [ 8.547618] systemd[1]: Mounted Kernel Configuration File System. [ 9.952509] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.959759] imx219 9-0010: board setup failed [ 9.961997] imx219: probe of 9-0010 failed with error -121 [ 9.973100] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.979975] imx219 10-0010: board setup failed [ 9.981722] imx219: probe of 10-0010 failed with error -121 [ 10.088871] hot-surface-alert cooling state: 0 -> 1 [ 10.818435] using random self ethernet address [ 10.860375] using random host ethernet address [ 11.634662] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.634668] Creating 1 MTD partitions on "spi6.0": [ 11.634679] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.287351] using random self ethernet address [ 12.289057] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.818376] nvidia: loading out-of-tree module taints kernel. [ 58.974544] watchdog: watchdog0: watchdog did not stop! [ 59.445704] Trying to unregister non-registered hwtime source [ 62.507778] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.509377] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] àÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.420] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.489] I> register 'maxim' power off handle [0003.493] I> virtual i2c enabled [0003.493] I> registered 'maxim,max20024' pmic [0003.494] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.494] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> regulator 'vdd-hdmi-5v0' already enabled [0003.598] I> hdmi cable connected [0003.603] W> set volts not configured for 'vdd-1v0' [0003.607] W> set volts not configured for 'vdd-1v8-hs' [0003.608] I> retrieved tmds range from prod_list_hdmi_soc [0003.613] E> invalid display type [0003.614] E> cannot find any other nvdisp nodes [0003.631] I> edid read success [0003.643] I> edid read success [0003.643] I> width = 640, height = 480, frequency = 25174825 [0003.644] I> width = 1920, height = 1080, frequency = 148500000 [0003.644] I> width = 1280, height = 768, frequency = 79500000 [0003.645] I> width = 1360, height = 768, frequency = 85500000 [0003.645] I> width = 720, height = 480, frequency = 26973026 [0003.649] I> width = 720, height = 576, frequency = 26973026 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.666] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 720, height = 480, frequency = 26973026 [0003.683] I> width = 720, height = 576, frequency = 26973026 [0003.688] I> width = 3840, height = 2160, frequency = 296703296 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 4096, height = 2160, frequency = 296703296 [0003.717] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.728] I> hdmi_enable, starting HDMI initialisation [0003.733] I> hdmi_enable, HDMI initialisation complete [0003.742] initializing target [0003.743] calling apps_init() [0003.744] starting app kernel_boot_app [0003.744] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000674] Console: colour dummy device 80x25 [ 0.002157] printk: console [tty0] enabled [ 0.002251] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002315] pid_max: default: 32768 minimum: 301 [ 0.002497] LSM: Security Framework initializing [ 0.002554] Yama: becoming mindful. [ 0.002612] SELinux: Initializing. [ 0.002780] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002819] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005979] rcu: Hierarchical SRCU implementation. [ 0.006226] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006935] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007000] DTB Build time: Aug 10 2022 20:31:49 [ 0.009741] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010015] Remapping and enabling EFI services. [ 0.011915] smp: Bringing up secondary CPUs ... [ 0.041910] Detected PIPT I-cache on CPU1 [ 0.042017] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071501] Detected PIPT I-cache on CPU2 [ 0.071643] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101301] Detected PIPT I-cache on CPU3 [ 0.101435] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131188] Detected PIPT I-cache on CPU4 [ 0.131289] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161103] Detected PIPT I-cache on CPU5 [ 0.161205] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161532] smp: Brought up 1 node, 6 CPUs [ 0.161733] SMP: Total of 6 processors activated. [ 0.161809] CPU features: detected: Privileged Access Never [ 0.161831] CPU features: detected: LSE atomic instructions [ 0.161844] CPU features: detected: User Access Override [ 0.161856] CPU features: detected: 32-bit EL0 Support [ 0.161868] CPU features: detected: RAS Extension Support [ 0.161880] CPU features: detected: CRC32 instructions [ 0.161893] CPU features: detected: 32-bit EL1 Support [ 0.230084] CPU: All CPU(s) started at EL2 [ 0.235418] devtmpfs: initialized [ 0.287570] Registered cp15_barrier emulation handler [ 0.287699] Registered setend emulation handler [ 0.287719] KASLR enabled [ 0.288003] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288028] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289443] pinctrl core: initialized pinctrl subsystem [ 0.290443] SMBIOS 3.0.0 present. [ 0.290489] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291067] NET: Registered protocol family 16 [ 0.292906] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293425] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294109] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294164] audit: initializing netlink subsys (disabled) [ 0.294388] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.294812] thermal_sys: Registered thermal governor 'step_wise' [ 0.294819] thermal_sys: Registered thermal governor 'power_allocator' [ 0.294833] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.297075] cpuidle: using governor menu [ 0.297360] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297764] ASID allocator initialised with 32768 entries [ 0.298038] Serial: AMBA PL011 UART driver [ 0.301143] Tegra reboot handler registered. [ 0.373878] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.374029] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.374242] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.374285] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.374405] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.374446] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.374561] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.374624] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.374775] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.374814] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.377084] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.377122] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.377151] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.377178] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.377208] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.377239] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.377276] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.377307] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.377334] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.377358] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.377381] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.377404] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.377450] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.377474] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.377497] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.377520] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.377542] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.377628] mc-err: mcerr ops are set to t19x [ 0.391021] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.391043] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.391056] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.391067] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397822] ACPI: Interpreter disabled. [ 0.399025] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400328] iommu: Default domain type: Translated [ 0.400398] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400783] SCSI subsystem initialized [ 0.400957] usbcore: registered new interface driver usbfs [ 0.401005] usbcore: registered new interface driver hub [ 0.401041] usbcore: registered new device driver usb [ 0.401458] mc: Linux media interface: v0.10 [ 0.401489] videodev: Linux video capture interface: v2.00 [ 0.401783] pps_core: LinuxPPS API ver. 1 registered [ 0.401795] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401816] PTP clock support registered [ 0.402019] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.402404] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.402506] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.403273] Registered efivars operations [ 0.408575] FPGA manager framework [ 0.408696] Advanced Linux Sound Architecture Driver Initialized. [ 0.409323] Bluetooth: Core ver 2.22 [ 0.409361] NET: Registered protocol family 31 [ 0.409389] Bluetooth: HCI device and connection manager initialized [ 0.409410] Bluetooth: HCI socket layer initialized [ 0.409425] Bluetooth: L2CAP socket layer initialized [ 0.409463] Bluetooth: SCO socket layer initialized [ 0.411173] camchar: rtcpu character device driver loaded [ 0.411874] clocksource: Switched to clocksource arch_sys_counter [ 0.701516] VFS: Disk quotas dquot_6.6.0 [ 0.701609] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.701964] pnp: PnP ACPI: disabled [ 0.714489] la/ptsa driver initialized. [ 0.714625] NET: Registered protocol family 2 [ 0.714799] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.720004] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.720091] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.720377] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.720825] TCP: Hash tables configured (established 65536 bind 65536) [ 0.720990] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.721082] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.721263] NET: Registered protocol family 1 [ 0.721855] RPC: Registered named UNIX socket transport module. [ 0.721870] RPC: Registered udp transport module. [ 0.721879] RPC: Registered tcp transport module. [ 0.721888] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.721908] PCI: CLS 0 bytes, default 64 [ 0.722113] Trying to unpack rootfs image as initramfs... [ 0.910915] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.913135] Freeing initrd memory: 8196K [ 0.917295] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.917335] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.917415] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.917835] kvm [1]: IPA Size Limit: 40 bits [ 0.918347] kvm [1]: vgic interrupt IRQ9 [ 0.918841] kvm [1]: VHE mode initialized successfully [ 0.920321] Initialise system trusted keyrings [ 0.920602] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.926476] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.927262] NFS: Registering the id_resolver key type [ 0.927308] Key type id_resolver registered [ 0.927326] Key type id_legacy registered [ 0.927426] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.927445] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.927494] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.935330] NET: Registered protocol family 38 [ 0.935350] Key type asymmetric registered [ 0.935362] Asymmetric key parser 'x509' registered [ 0.935403] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.935587] io scheduler mq-deadline registered [ 0.935601] io scheduler kyber registered [ 0.940241] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.942598] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.942656] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.942708] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.942759] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.942810] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.947355] scrncapt: init (heads:4 wins:6 planes:4) [ 0.947688] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.948475] EINJ: ACPI disabled. [ 0.951036] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.951066] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.951077] tegra-pmc: ### PMC reset level: L1 [ 0.951087] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.951125] tegra-pmc: PMC Prod config success [ 0.955718] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.960040] random: fast init done [ 0.960181] printk: console [ttyTCU0] enabled [ 2.512945] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.517371] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.521906] arm-smmu 10000000.iommu: stage 1 translation [ 2.527417] arm-smmu 10000000.iommu: stage 2 translation [ 2.532672] arm-smmu 10000000.iommu: nested translation [ 2.538277] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.545193] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.557398] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.558295] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.564880] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.573006] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.578174] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.582894] arm-smmu 12000000.iommu: stage 1 translation [ 2.588158] arm-smmu 12000000.iommu: stage 2 translation [ 2.593572] arm-smmu 12000000.iommu: nested translation [ 2.599260] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.606445] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.618306] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.619537] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.626120] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.633229] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.643159] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.646525] tegra_profiler: auth: init [ 2.650522] THERMAL EST: found 3 subdevs [ 2.653957] THERMAL EST num_resources: 0 [ 2.658055] [THERMAL EST subdev 0] [ 2.661123] [THERMAL EST subdev 1] [ 2.664792] [THERMAL EST subdev 2] [ 2.667770] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.674269] THERMAL EST: thz register success. [ 2.678743] THERMAL EST: end of probe, return err: 0 [ 2.683784] nvsciipc: loaded module [ 2.691084] tun: Universal TUN/TAP device driver, 1.6 [ 2.693650] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.699813] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.705122] e1000e: Intel(R) PRO/1000 Network Driver [ 2.710297] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.716153] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.721667] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.727783] PPP generic driver version 2.4.2 [ 2.731924] PPP BSD Compression module registered [ 2.736635] PPP Deflate Compression module registered [ 2.741886] PPP MPPE Compression module registered [ 2.746653] usbcore: registered new interface driver r8152 [ 2.752421] usbcore: registered new interface driver asix [ 2.757490] usbcore: registered new interface driver ax88179_178a [ 2.763624] usbcore: registered new interface driver cdc_ether [ 2.769825] usbcore: registered new interface driver net1080 [ 2.775418] usbcore: registered new interface driver cdc_subset [ 2.781203] usbcore: registered new interface driver zaurus [ 2.786898] usbcore: registered new interface driver cdc_ncm [ 2.792581] usbcore: registered new interface driver aqc111 [ 2.798238] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.804573] ohci-pci: OHCI PCI platform driver [ 2.808590] ohci-platform: OHCI generic platform driver [ 2.814446] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.821247] usbcore: registered new interface driver uas [ 2.824887] usbcore: registered new interface driver usb-storage [ 2.831035] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.837053] mousedev: PS/2 mouse device common for all mice [ 2.842306] usbcore: registered new interface driver xpad [ 2.850104] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.852790] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.860573] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.867358] i2c /dev entries driver [ 2.870706] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.876351] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.881775] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.887493] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.892666] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.898146] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.903281] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.917337] device-mapper: uevent: version 1.0.3 [ 2.917800] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.924016] cpuidle: Initializing cpuidle driver [ 2.928097] sdhci: Secure Digital Host Controller Interface driver [ 2.932401] sdhci: Copyright(c) Pierre Ossman [ 2.936488] Synopsys Designware Multimedia Card Interface Driver [ 2.942901] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.948919] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.949460] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.962098] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.980850] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.989773] vdd-1v0: supplied by regulator-dummy [ 2.995195] vdd-1v8-hs: supplied by regulator-dummy [ 2.999920] vdd-1v8-ls: supplied by regulator-dummy [ 3.004629] vdd-1v8-ao: supplied by regulator-dummy [ 3.008403] vddio-ddr-1v1: supplied by regulator-dummy [ 3.012716] vdd-rtc: supplied by regulator-dummy [ 3.014299] spmic-ldo1: supplied by regulator-dummy [ 3.015386] vdd-ao-3v3: supplied by regulator-dummy [ 3.021377] vddio-emmc-3v3: supplied by regulator-dummy [ 3.027496] spmic-ldo4: supplied by regulator-dummy [ 3.028579] vdd-usb-3v3: supplied by regulator-dummy [ 3.034581] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.040639] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.046060] spmic-ldo8: supplied by vdd-1v8-ls [ 3.047422] gpio-510 (gpio_default): hogged as output/high [ 3.048775] gpio-511 (gpio_default): hogged as output/high [ 3.055805] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.193983] max77686-rtc max77620-rtc: registered as rtc0 [ 3.194979] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.195268] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.886680] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.887643] hid: raw HID events driver (C) Jiri Kosina [ 3.888403] usbcore: registered new interface driver usbhid [ 3.888545] usbhid: USB HID core driver [ 3.890241] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.891332] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.741054] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.816576] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 76.330 ms) ÿá[ 3.976626] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.977202] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.978270] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.978982] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.980981] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.981649] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.982256] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.983591] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.984056] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.985809] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.992921] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.998920] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.004200] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.011270] denver_knobs_init:MTS_VERSION:55637613 [ 4.023850] t19x_cache tegra-cache: probed [ 4.026838] optee: probing for conduit method. [ 4.027761] optee: revision 3.16 (65cc2218) [ 4.028881] optee: dynamic shared memory is enabled [ 4.031463] optee: initialized driver [ 4.038225] nvpmodel: initialized successfully [ 4.038988] tegra_hv: get_hvd: not initialized yet [ 4.043814] user_ivc_mempool: hypervisor not present [ 4.050124] usbcore: registered new interface driver snd-usb-audio [ 4.056337] u32 classifier [ 4.057776] input device check on [ 4.061564] Actions configured [ 4.064893] Initializing XFRM netlink socket [ 4.069847] NET: Registered protocol family 10 [ 4.077025] Segment Routing with IPv6 [ 4.077504] NET: Registered protocol family 17 [ 4.081568] NET: Registered protocol family 15 [ 4.085863] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.099480] Bluetooth: RFCOMM socket layer initialized [ 4.104386] Bluetooth: RFCOMM ver 1.11 [ 4.107970] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.114126] Bluetooth: HIDP socket layer initialized [ 4.119820] 9pnet: Installing 9P2000 support [ 4.123568] Key type dns_resolver registered [ 4.129134] registered taskstats version 1 [ 4.131649] Loading compiled-in X.509 certificates [ 4.145863] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.147858] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.158562] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.159847] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.168312] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.176573] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.292059] tegra194-pcie 14160000.pcie: Link up [ 4.295523] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.295991] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.296195] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.296468] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.296676] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.297088] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.297700] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.311390] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.312279] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.312809] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.314342] pci 0004:01:00.0: supports D1 D2 [ 4.314638] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.326043] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.326358] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.326605] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.327175] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.327508] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.327764] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.328127] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.334075] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.342786] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.352797] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.357446] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.363438] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.370101] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.379593] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.380593] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.388937] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.397724] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.512835] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.513342] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.513523] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.513682] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.513979] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.514195] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.514635] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.515120] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.538105] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.538428] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.540543] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.541883] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.543438] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.545096] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.546291] pci 0005:00:00.0: Removing from iommu group 7 [ 5.546589] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.582495] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.608096] host1x 13e10000.host1x: initialized [ 5.610051] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.610959] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.612464] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.613120] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.614256] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.614932] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.616272] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.616943] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.618506] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.619300] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.622781] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.629873] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.640457] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.646871] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.657035] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.663848] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.673935] falcon 15340000.vic: Adding to iommu group 17 [ 5.689140] falcon 15340000.vic: initialized [ 5.690198] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.696557] falcon 15380000.nvjpg: initialized [ 5.697208] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.706785] falcon 154c0000.nvenc: initialized [ 5.707522] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.717128] falcon 15a80000.nvenc1: initialized [ 5.717898] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.729395] nvdec 15480000.nvdec: initialized [ 5.730083] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.739199] nvdec 15140000.nvdec1: initialized [ 5.739745] tsec 15500000.tsec: Adding to iommu group 18 [ 5.746174] tsec 15500000.tsec: initialized [ 5.746705] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.754695] tsec 15100000.tsecb: initialized [ 5.758844] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.787694] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.800114] gpio-374 (wifi-enable): hogged as output/high [ 5.800515] gpio-431 (camera-control-output-low): hogged as output/low [ 5.800829] gpio-432 (camera-control-output-low): hogged as output/low [ 5.802450] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.804477] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.805004] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.806465] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.810295] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.816144] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.821627] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.830609] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.837723] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.849795] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.854397] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.859937] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.868701] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.878450] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.885375] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.893179] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.898996] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.908943] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.914900] pva 16000000.pva0: Adding to iommu group 22 [ 5.942755] pva 16000000.pva0: initialized [ 5.947698] pva 16800000.pva1: Adding to iommu group 23 [ 5.959831] pva 16800000.pva1: initialized [ 5.964761] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.978133] nvdla 15880000.nvdla0: initialized [ 5.980000] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.988970] nvdla 158c0000.nvdla1: initialized [ 5.994111] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.994136] tegradc 15200000.display: Adding to iommu group 26 [ 5.994163] tegradc 15210000.display: Adding to iommu group 26 [ 5.994578] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.995990] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.996597] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.000343] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.000754] tegra_cec 3960000.tegra_cec: probed [ 6.002543] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.002772] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.007862] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.008041] tegradccommon 15200000.display-hub: dma mapping done [ 6.016410] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.033804] kfuse 3830000.kfuse: initialized [ 6.038125] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.043760] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.051353] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.057596] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.066727] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.072090] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.081327] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.086849] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.107760] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.108209] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.109779] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.118327] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.126927] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.133089] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.141087] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.148235] usb usb1: Product: xHCI Host Controller [ 6.152950] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.159246] usb usb1: SerialNumber: 3610000.xhci [ 6.164837] hub 1-0:1.0: USB hub found [ 6.168096] hub 1-0:1.0: 4 ports detected [ 6.172692] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.177245] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.185145] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.192916] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.200421] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.207644] usb usb2: Product: xHCI Host Controller [ 6.212880] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.219092] usb usb2: SerialNumber: 3610000.xhci [ 6.224451] hub 2-0:1.0: USB hub found [ 6.227286] hub 2-0:1.0: 4 ports detected [ 6.273321] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.279827] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.281504] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.281715] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.295764] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.296915] tegra194-cpufreq ccplex: probed with BWMGR [ 6.298077] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.298533] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.298956] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.300244] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.305681] tegra194-vi5 15c10000.vi: initialized [ 6.307361] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.307615] generic_infoframe_type: 0x87 [ 6.308909] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.309855] mmc0: CQHCI version 5.10 [ 6.311705] tegradc 15200000.display: DT parsed successfully [ 6.317876] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.321340] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.327321] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.327330] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.336366] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.338855] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.343195] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.349716] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.349720] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.350070] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.356373] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.363940] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.364775] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.372653] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.379202] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.387024] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.396883] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.435915] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.437523] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.467779] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.469443] tegradc 15200000.display: probed [ 6.478884] nvethernet 2490000.ethernet: Macsec not supported [ 6.486007] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.493931] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.498034] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.498602] mmc0: Command Queue Engine enabled [ 6.505546] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.509603] mmc0: periodic cache flush enabled [ 6.517669] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.520710] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.521290] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.528923] tegra-se-nvhost 15810000.se: initialized [ 6.533557] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.550780] Console: switching to colour frame buffer device 240x67 [ 6.556694] tegradc 15200000.display: fb registered [ 6.561306] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.568014] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.568682] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.574009] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.578471] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.579705] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.586251] tegra-se-nvhost 15820000.se: initialized [ 6.605848] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.611172] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.617405] tegra-se-nvhost 15830000.se: initialized [ 6.622757] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.628744] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.634883] tegra-se-nvhost 15840000.se: initialized [ 6.635562] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.636572] random: crng init done [ 6.640867] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.646471] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.647565] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.647573] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.647665] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.647670] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.647673] usb 1-2: Manufacturer: Generic [ 6.648252] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.652549] tegra_actmon d230000.actmon: in actmon_register()... [ 6.657018] Extcon AUX1(HDMI) enable [ 6.673854] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.681888] hub 1-2:1.0: USB hub found [ 6.688168] tegradc 15210000.display: disp1 connected to head1->sor [ 6.688220] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.688287] tegradc 15210000.display: DT parsed successfully [ 6.688317] tegradc 15210000.display: Display dc.000000000a3291fd registered with id=1 [ 6.688426] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.688431] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.689218] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.694786] hub 1-2:1.0: 4 ports detected [ 6.696678] tegradc 15210000.display: probed [ 6.698350] hvc_sysfs: hypervisor is not present [ 6.752850] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.784670] ALSA device list: [ 6.794839] No soundcards found. [ 6.798597] tegradc 15210000.display: fb registered [ 6.801954] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.810652] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.811622] Freeing unused kernel memory: 3968K [ 6.818590] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.827967] Run /init as init process [ 6.832170] tegradc 15210000.display: blank - powerdown [ 6.837342] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.837369] Extcon DP: HPD disabled [ 6.849065] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.849090] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.855596] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.863963] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.863968] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.863971] usb 2-3: Manufacturer: Generic ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.886118] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.886188] tegradc 15200000.display: blank - powerdown [ 6.894932] hub 2-3:1.0: USB hub found [ 6.895836] Root device found: mmcblk0p1 [ 6.896860] hub 2-3:1.0: 4 ports detected [ 6.897923] Found dev node: /dev/mmcblk0p1 [ 6.930259] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.930265] Extcon AUX1(HDMI) disable [ 6.932805] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 6.936707] Rootfs mounted over mmcblk0p1 [ 6.953755] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.954690] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.955925] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 6.968602] tegradc 15200000.display: unblank [ 6.969883] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.970201] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.972055] Switching from initrd to actual rootfs [ 6.976214] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.978186] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.982215] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.982219] Extcon AUX1(HDMI) enable [ 6.994985] tegradc 15200000.display: sync windows ret = 247 [ 7.008491] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.035259] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.042651] Extcon HDMI: HPD enabled [ 7.046068] tegradc 15200000.display: hdmi: plugged [ 7.073048] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.074463] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.105177] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.106633] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.108032] usb 1-3: Product: Bluetooth Radio [ 7.109316] usb 1-3: Manufacturer: Realtek [ 7.110615] usb 1-3: SerialNumber: 00e04c000001 [ 7.115444] systemd[1]: System time before build time, advancing clock. [ 7.184296] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.189197] systemd[1]: Detected architecture arm64. [ 7.236126] systemd[1]: Set hostname to . [ 7.395384] systemd-sysv-generator[238]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.749263] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.750965] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.756660] systemd[1]: Created slice system-modprobe.slice. [ 7.761352] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.765473] systemd[1]: Created slice User and Session Slice. [ 7.768863] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.772964] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.776304] systemd[1]: Reached target User and Group Name Lookups. [ 7.779455] systemd[1]: Reached target Slices. [ 7.782685] systemd[1]: Reached target Swap. [ 7.786747] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.790397] systemd[1]: Listening on Syslog Socket. [ 7.793928] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.797343] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.801530] systemd[1]: Listening on Journal Audit Socket. [ 7.805230] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.809149] systemd[1]: Listening on Journal Socket. [ 7.815076] systemd[1]: Listening on udev Control Socket. [ 7.821186] systemd[1]: Listening on udev Kernel Socket. [ 7.832554] systemd[1]: Mounting Huge Pages File System... [ 7.843256] systemd[1]: Mounting POSIX Message Queue File System... [ 7.851587] systemd[1]: Mounting RPC Pipe File System... [ 7.860478] systemd[1]: Mounting Kernel Debug File System... [ 7.868901] systemd[1]: Mounting Kernel Trace File System... [ 7.882175] systemd[1]: Starting Journal Service... [ 7.891039] systemd[1]: Starting Set the console keyboard layout... [ 7.899264] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 7.902869] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 7.909078] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 7.916915] systemd[1]: Started Nameserver information manager. [ 7.924202] systemd[1]: Reached target Network (Pre). [ 7.932431] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 7.934247] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 7.940735] systemd[1]: Starting Load Kernel Modules... [ 7.948362] systemd[1]: Starting Remount Root and Kernel File Systems... [ 7.957246] systemd[1]: Starting udev Coldplug all Devices... [ 7.967601] systemd[1]: Mounted Huge Pages File System. [ 7.971403] systemd[1]: Mounted POSIX Message Queue File System. [ 7.974879] systemd[1]: Mounted RPC Pipe File System. [ 7.976515] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 7.983034] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 7.984004] systemd[1]: Mounted Kernel Debug File System. [ 7.984982] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 7.987343] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 7.987355] nvmap_page_pool_init: Total RAM pages: 1752674 [ 7.987359] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 7.987635] nvmap_background_zero_thread: PP zeroing thread starting. [ 7.989115] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 7.994728] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 7.994738] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.000238] systemd[1]: Mounted Kernel Trace File System. [ 8.006516] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.011487] systemd[1]: nvfb-udev.service: Succeeded. [ 8.015711] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.025326] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.030827] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.032636] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.040723] systemd[1]: Starting Load/Save Random Seed... [ 8.050400] systemd[1]: Starting Create System Users... [ 8.091722] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.091722] [ 8.105394] systemd[1]: Finished Load/Save Random Seed. [ 8.118010] systemd[1]: Finished Create System Users. [ 8.124839] systemd[1]: Finished Load Kernel Modules. [ 8.129169] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.135387] systemd[1]: Mounting Kernel Configuration File System... [ 8.144542] systemd[1]: Started OP-TEE Client Supplicant. [ 8.152947] systemd[1]: Starting Apply Kernel Variables... [ 8.161055] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.171986] systemd[1]: Finished Set the console keyboard layout. [ 8.176201] systemd[1]: Mounted Kernel Configuration File System. [ 9.448857] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.458701] imx219 9-0010: board setup failed [ 9.458802] imx219: probe of 9-0010 failed with error -121 [ 9.474019] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.479920] imx219 10-0010: board setup failed [ 9.480021] imx219: probe of 10-0010 failed with error -121 [ 9.542926] hot-surface-alert cooling state: 0 -> 1 [ 10.413267] using random self ethernet address [ 10.414447] using random host ethernet address [ 11.455800] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.456980] Creating 1 MTD partitions on "spi6.0": [ 11.458038] 0x000000000000-0x000002000000 : "Whole_flash0" [ 11.735287] using random self ethernet address [ 11.736677] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.807291] nvidia: loading out-of-tree module taints kernel. [ 58.865764] watchdog: watchdog0: watchdog did not stop! [ 59.377660] Trying to unregister non-registered hwtime source [ 62.439370] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.441255] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] téÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.419] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.469] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.490] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.491] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.648] I> edid read success [0003.648] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.650] I> width = 720, height = 480, frequency = 26973026 [0003.654] I> width = 720, height = 576, frequency = 26973026 [0003.659] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.676] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.716] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.733] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.747] initializing target [0003.748] calling apps_init() [0003.749] starting app kernel_boot_app [0003.750] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000632] Console: colour dummy device 80x25 [ 0.002044] printk: console [tty0] enabled [ 0.002109] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002147] pid_max: default: 32768 minimum: 301 [ 0.002326] LSM: Security Framework initializing [ 0.002384] Yama: becoming mindful. [ 0.002431] SELinux: Initializing. [ 0.002580] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002618] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005558] rcu: Hierarchical SRCU implementation. [ 0.005848] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006690] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006740] DTB Build time: Aug 10 2022 20:31:49 [ 0.009513] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009730] Remapping and enabling EFI services. [ 0.011929] smp: Bringing up secondary CPUs ... [ 0.041198] Detected PIPT I-cache on CPU1 [ 0.041273] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070864] Detected PIPT I-cache on CPU2 [ 0.070974] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100521] Detected PIPT I-cache on CPU3 [ 0.100613] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130286] Detected PIPT I-cache on CPU4 [ 0.130386] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160186] Detected PIPT I-cache on CPU5 [ 0.160277] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160714] smp: Brought up 1 node, 6 CPUs [ 0.161021] SMP: Total of 6 processors activated. [ 0.161067] CPU features: detected: Privileged Access Never [ 0.161095] CPU features: detected: LSE atomic instructions [ 0.161115] CPU features: detected: User Access Override [ 0.161146] CPU features: detected: 32-bit EL0 Support [ 0.161165] CPU features: detected: RAS Extension Support [ 0.161198] CPU features: detected: CRC32 instructions [ 0.161223] CPU features: detected: 32-bit EL1 Support [ 0.233086] CPU: All CPU(s) started at EL2 [ 0.239078] devtmpfs: initialized [ 0.288571] Registered cp15_barrier emulation handler [ 0.288675] Registered setend emulation handler [ 0.288695] KASLR enabled [ 0.288976] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289000] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.290386] pinctrl core: initialized pinctrl subsystem [ 0.291375] SMBIOS 3.0.0 present. [ 0.291404] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292014] NET: Registered protocol family 16 [ 0.294210] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.294710] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.295452] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.295512] audit: initializing netlink subsys (disabled) [ 0.295753] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296220] thermal_sys: Registered thermal governor 'step_wise' [ 0.296226] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296239] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299633] cpuidle: using governor menu [ 0.300099] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300639] ASID allocator initialised with 32768 entries [ 0.300879] Serial: AMBA PL011 UART driver [ 0.304277] Tegra reboot handler registered. [ 0.379758] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.379920] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.380168] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.380208] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.380330] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.380370] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.380484] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.380521] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.380658] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.380713] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.382870] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.382909] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.382938] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.382967] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.382995] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.383025] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.383059] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.383093] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.383118] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.383144] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.383171] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.383198] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.383222] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.383249] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.383275] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.383306] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.383331] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.383430] mc-err: mcerr ops are set to t19x [ 0.396984] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.397006] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.397018] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.397029] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.404535] ACPI: Interpreter disabled. [ 0.406123] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.407930] iommu: Default domain type: Translated [ 0.408088] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.408652] SCSI subsystem initialized [ 0.408913] usbcore: registered new interface driver usbfs [ 0.408982] usbcore: registered new interface driver hub [ 0.409032] usbcore: registered new device driver usb [ 0.409645] mc: Linux media interface: v0.10 [ 0.409698] videodev: Linux video capture interface: v2.00 [ 0.410174] pps_core: LinuxPPS API ver. 1 registered [ 0.410192] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.410223] PTP clock support registered [ 0.410527] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.410951] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.411054] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.411880] Registered efivars operations [ 0.420216] FPGA manager framework [ 0.420406] Advanced Linux Sound Architecture Driver Initialized. [ 0.421209] Bluetooth: Core ver 2.22 [ 0.421261] NET: Registered protocol family 31 [ 0.421300] Bluetooth: HCI device and connection manager initialized [ 0.421325] Bluetooth: HCI socket layer initialized [ 0.421343] Bluetooth: L2CAP socket layer initialized [ 0.421373] Bluetooth: SCO socket layer initialized [ 0.423758] camchar: rtcpu character device driver loaded [ 0.424954] clocksource: Switched to clocksource arch_sys_counter [ 0.870653] VFS: Disk quotas dquot_6.6.0 [ 0.870737] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.871180] pnp: PnP ACPI: disabled [ 0.887049] la/ptsa driver initialized. [ 0.887223] NET: Registered protocol family 2 [ 0.887443] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.895092] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.895280] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.895659] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.896284] TCP: Hash tables configured (established 65536 bind 65536) [ 0.896448] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.896584] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.896890] NET: Registered protocol family 1 [ 0.897572] RPC: Registered named UNIX socket transport module. [ 0.897590] RPC: Registered udp transport module. [ 0.897603] RPC: Registered tcp transport module. [ 0.897616] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.897647] PCI: CLS 0 bytes, default 64 [ 0.897903] Trying to unpack rootfs image as initramfs... [ 1.172599] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.175804] Freeing initrd memory: 8196K [ 1.180908] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.180999] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.181043] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.181402] kvm [1]: IPA Size Limit: 40 bits [ 1.181986] kvm [1]: vgic interrupt IRQ9 [ 1.182664] kvm [1]: VHE mode initialized successfully [ 1.184241] Initialise system trusted keyrings [ 1.184594] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.191867] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.192863] NFS: Registering the id_resolver key type [ 1.192905] Key type id_resolver registered [ 1.192919] Key type id_legacy registered [ 1.193062] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.193087] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.193122] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.204696] NET: Registered protocol family 38 [ 1.204722] Key type asymmetric registered [ 1.204737] Asymmetric key parser 'x509' registered [ 1.204796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.205110] io scheduler mq-deadline registered [ 1.205129] io scheduler kyber registered [ 1.211142] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.214459] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.214538] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.214610] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.214680] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.214749] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.220450] scrncapt: init (heads:4 wins:6 planes:4) [ 1.220937] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.221994] EINJ: ACPI disabled. [ 1.225588] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.225613] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.225627] tegra-pmc: ### PMC reset level: L1 [ 1.225639] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.225693] tegra-pmc: PMC Prod config success [ 1.231572] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.270332] random: fast init done [ 1.271463] printk: console [ttyTCU0] enabled [ 2.789996] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.794171] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.798752] arm-smmu 10000000.iommu: stage 1 translation [ 2.804029] arm-smmu 10000000.iommu: stage 2 translation [ 2.809730] arm-smmu 10000000.iommu: nested translation [ 2.814828] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.822244] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.833126] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.835088] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.841935] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.849526] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.854717] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.859434] arm-smmu 12000000.iommu: stage 1 translation [ 2.865200] arm-smmu 12000000.iommu: stage 2 translation [ 2.870368] arm-smmu 12000000.iommu: nested translation [ 2.876063] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.883238] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.893978] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.896332] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.902660] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.910329] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.919737] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.923055] tegra_profiler: auth: init [ 2.927645] THERMAL EST: found 3 subdevs [ 2.930755] THERMAL EST num_resources: 0 [ 2.934852] [THERMAL EST subdev 0] [ 2.937920] [THERMAL EST subdev 1] [ 2.941588] [THERMAL EST subdev 2] [ 2.944554] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.951013] THERMAL EST: thz register success. [ 2.955279] THERMAL EST: end of probe, return err: 0 [ 2.960849] nvsciipc: loaded module [ 2.968003] tun: Universal TUN/TAP device driver, 1.6 [ 2.970490] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.976350] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.982150] e1000e: Intel(R) PRO/1000 Network Driver [ 2.986837] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.993168] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.998464] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.004666] PPP generic driver version 2.4.2 [ 3.008865] PPP BSD Compression module registered [ 3.013440] PPP Deflate Compression module registered [ 3.018684] PPP MPPE Compression module registered [ 3.023441] usbcore: registered new interface driver r8152 [ 3.029226] usbcore: registered new interface driver asix [ 3.034285] usbcore: registered new interface driver ax88179_178a [ 3.040414] usbcore: registered new interface driver cdc_ether [ 3.046615] usbcore: registered new interface driver net1080 [ 3.052220] usbcore: registered new interface driver cdc_subset [ 3.058040] usbcore: registered new interface driver zaurus [ 3.063693] usbcore: registered new interface driver cdc_ncm [ 3.069379] usbcore: registered new interface driver aqc111 [ 3.075016] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.081341] ohci-pci: OHCI PCI platform driver [ 3.085384] ohci-platform: OHCI generic platform driver [ 3.091280] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.097830] usbcore: registered new interface driver uas [ 3.101964] usbcore: registered new interface driver usb-storage [ 3.107871] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.114011] mousedev: PS/2 mouse device common for all mice [ 3.119096] usbcore: registered new interface driver xpad [ 3.126797] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.129604] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.137376] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.143879] i2c /dev entries driver [ 3.147543] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.153483] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.158322] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.163795] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.169130] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.174669] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.180056] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.193446] device-mapper: uevent: version 1.0.3 [ 3.193877] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.200779] cpuidle: Initializing cpuidle driver [ 3.204443] sdhci: Secure Digital Host Controller Interface driver [ 3.209188] sdhci: Copyright(c) Pierre Ossman [ 3.213543] Synopsys Designware Multimedia Card Interface Driver [ 3.219737] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.225698] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.226531] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.239073] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.261991] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.271820] vdd-1v0: supplied by regulator-dummy [ 3.277454] vdd-1v8-hs: supplied by regulator-dummy [ 3.282336] vdd-1v8-ls: supplied by regulator-dummy [ 3.287240] vdd-1v8-ao: supplied by regulator-dummy [ 3.291249] vddio-ddr-1v1: supplied by regulator-dummy [ 3.295809] vdd-rtc: supplied by regulator-dummy [ 3.297618] spmic-ldo1: supplied by regulator-dummy [ 3.298904] vdd-ao-3v3: supplied by regulator-dummy [ 3.305178] vddio-emmc-3v3: supplied by regulator-dummy [ 3.311506] spmic-ldo4: supplied by regulator-dummy [ 3.312780] vdd-usb-3v3: supplied by regulator-dummy [ 3.319046] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.325348] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.331025] spmic-ldo8: supplied by vdd-1v8-ls [ 3.332519] gpio-510 (gpio_default): hogged as output/high [ 3.333951] gpio-511 (gpio_default): hogged as output/high [ 3.336914] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.472974] max77686-rtc max77620-rtc: registered as rtc0 [ 3.474502] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.474870] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.312928] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.314067] hid: raw HID events driver (C) Jiri Kosina [ 4.314898] usbcore: registered new interface driver usbhid [ 4.315073] usbhid: USB HID core driver [ 4.317262] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.318590] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.385564] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.459997] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.242 ms) ÿá[ 4.403170] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.403749] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.405085] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.405873] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.407624] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.408276] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.408772] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.410509] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.410738] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.413426] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.419926] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.426244] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.431646] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.437391] denver_knobs_init:MTS_VERSION:55637613 [ 4.450130] t19x_cache tegra-cache: probed [ 4.452923] optee: probing for conduit method. [ 4.453874] optee: revision 3.16 (65cc2218) [ 4.454805] optee: dynamic shared memory is enabled [ 4.457886] optee: initialized driver [ 4.464724] nvpmodel: initialized successfully [ 4.465864] tegra_hv: get_hvd: not initialized yet [ 4.470435] user_ivc_mempool: hypervisor not present [ 4.476847] usbcore: registered new interface driver snd-usb-audio [ 4.483059] u32 classifier [ 4.483950] input device check on [ 4.487754] Actions configured [ 4.491716] Initializing XFRM netlink socket [ 4.496495] NET: Registered protocol family 10 [ 4.502658] Segment Routing with IPv6 [ 4.503847] NET: Registered protocol family 17 [ 4.507871] NET: Registered protocol family 15 [ 4.512571] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.526404] Bluetooth: RFCOMM socket layer initialized [ 4.530570] Bluetooth: RFCOMM ver 1.11 [ 4.534656] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.540246] Bluetooth: HIDP socket layer initialized [ 4.546234] 9pnet: Installing 9P2000 support [ 4.549935] Key type dns_resolver registered [ 4.555200] registered taskstats version 1 [ 4.558456] Loading compiled-in X.509 certificates [ 4.571330] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.574096] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.584389] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.586083] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.594910] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.603157] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.721042] tegra194-pcie 14160000.pcie: Link up [ 4.724244] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.724439] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.724583] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.724844] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.725057] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.725464] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.725901] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.738459] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.738957] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.739516] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.741221] pci 0004:01:00.0: supports D1 D2 [ 4.741374] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.754318] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.754800] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.755060] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.755670] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.755999] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.756185] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.756403] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.763387] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.771930] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.782406] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.786627] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.792407] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.799902] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.809335] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.809765] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.817976] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.826758] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.933115] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.933701] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.933995] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.934222] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.934494] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.934704] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.935253] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.935668] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.955213] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.955554] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.957648] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.958797] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.960372] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.962120] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.963081] pci 0005:00:00.0: Removing from iommu group 7 [ 5.963345] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.997450] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.021926] host1x 13e10000.host1x: initialized [ 6.023371] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.024437] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.025883] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.026654] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.027885] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.028609] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.030048] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.030837] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.031904] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.033171] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.043153] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.050409] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.060383] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.067140] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.077158] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.084244] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.094321] falcon 15340000.vic: Adding to iommu group 17 [ 6.108758] falcon 15340000.vic: initialized [ 6.109887] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.115518] falcon 15380000.nvjpg: initialized [ 6.116225] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.128193] falcon 154c0000.nvenc: initialized [ 6.128738] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.137570] falcon 15a80000.nvenc1: initialized [ 6.138218] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.150316] nvdec 15480000.nvdec: initialized [ 6.150941] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.161213] nvdec 15140000.nvdec1: initialized [ 6.161813] tsec 15500000.tsec: Adding to iommu group 18 [ 6.167473] tsec 15500000.tsec: initialized [ 6.167986] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.174666] tsec 15100000.tsecb: initialized [ 6.179189] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.206892] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.220349] gpio-374 (wifi-enable): hogged as output/high [ 6.220611] gpio-431 (camera-control-output-low): hogged as output/low [ 6.221046] gpio-432 (camera-control-output-low): hogged as output/low [ 6.222627] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.224477] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.225252] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.226634] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.230904] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.236641] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.242127] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.250452] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.257538] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.268899] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.274300] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.280152] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.289264] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.298194] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.305550] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.313135] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.319551] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.328858] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.335190] pva 16000000.pva0: Adding to iommu group 22 [ 6.362779] pva 16000000.pva0: initialized [ 6.368032] pva 16800000.pva1: Adding to iommu group 23 [ 6.380537] pva 16800000.pva1: initialized [ 6.384748] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.398233] nvdla 15880000.nvdla0: initialized [ 6.399557] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.415840] nvdla 158c0000.nvdla1: initialized [ 6.419042] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.419506] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.419631] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.419812] random: crng init done [ 6.420177] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.420435] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.420632] tegradccommon 15200000.display-hub: dma mapping done [ 6.421705] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.422431] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.422567] tegradc 15200000.display: Adding to iommu group 26 [ 6.422969] tegradc 15210000.display: Adding to iommu group 26 [ 6.428088] tegra_cec 3960000.tegra_cec: probed [ 6.429871] tegradc 15210000.display: disp0 connected to head1->sor [ 6.429954] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.430063] tegradc 15210000.display: DT parsed successfully [ 6.430069] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.434984] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.440672] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.444710] generic_infoframe_type: 0x87 [ 6.459805] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.463720] tegradc 15200000.display: DT parsed successfully [ 6.471859] kfuse 3830000.kfuse: initialized [ 6.478277] tegradc 15200000.display: Display dc.000000009a5d0a21 registered with id=0 [ 6.482476] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.485135] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.487653] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.494310] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.500045] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.500908] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.505197] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.512449] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.535615] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.543540] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.551873] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.559385] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.577319] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.588771] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.595021] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.623541] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.643715] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.644244] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.646595] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.654960] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.663368] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.670348] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.677452] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.684663] usb usb1: Product: xHCI Host Controller [ 6.689830] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.696112] usb usb1: SerialNumber: 3610000.xhci [ 6.701785] hub 1-0:1.0: USB hub found [ 6.704404] hub 1-0:1.0: 4 ports detected [ 6.709249] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.713842] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.721688] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.729472] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.737292] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.744515] usb usb2: Product: xHCI Host Controller [ 6.749236] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.755445] usb usb2: SerialNumber: 3610000.xhci [ 6.761061] hub 2-0:1.0: USB hub found [ 6.764139] hub 2-0:1.0: 4 ports detected [ 6.809872] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.816147] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.817843] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.818041] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.831126] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.832214] tegra194-cpufreq ccplex: probed with BWMGR [ 6.833495] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.834020] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.834506] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.835694] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.843169] tegra194-vi5 15c10000.vi: initialized [ 6.843236] mmc0: CQHCI version 5.10 [ 6.844837] tegradc 15210000.display: disp0 connected to head1->sor [ 6.846029] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.847896] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.853916] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.861110] tegradc 15210000.display: DT parsed successfully [ 6.869032] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.872433] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.874949] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.875050] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.881087] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.881093] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.881098] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.889002] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.896722] generic_infoframe_type: 0x87 [ 6.903478] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.903484] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.947469] tegradc 15200000.display: DT parsed successfully [ 6.948005] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.952729] tegradc 15200000.display: Display dc.000000004491d603 registered with id=0 [ 6.968603] nvethernet 2490000.ethernet: Macsec not supported [ 6.969313] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.975288] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.982231] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.982239] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.991757] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.999058] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 7.004982] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 7.007016] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.012590] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 7.012793] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 7.018618] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.026549] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 7.029533] mmc0: Command Queue Engine enabled [ 7.029537] mmc0: periodic cache flush enabled [ 7.029548] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.030078] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.030205] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.034032] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.034042] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.038498] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 7.040604] tegradc 15200000.display: probed [ 7.050922] tegra-se-nvhost 15810000.se: initialized [ 7.122538] Console: switching to colour frame buffer device 240x67 [ 7.127253] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.128629] tegradc 15200000.display: fb registered [ 7.135546] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.139969] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.146775] tegra-se-nvhost 15820000.se: initialized [ 7.152237] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.158373] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.162865] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.169328] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.172240] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.172246] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.172250] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.172253] usb 1-2: Manufacturer: Generic [ 7.174255] hub 1-2:1.0: USB hub found [ 7.175342] hub 1-2:1.0: 4 ports detected [ 7.213189] tegra-se-nvhost 15830000.se: initialized [ 7.219170] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.224829] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.231520] tegra-se-nvhost 15840000.se: initialized [ 7.237508] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.243477] tegra_actmon d230000.actmon: in actmon_register()... [ 7.247996] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.253814] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.261967] hvc_sysfs: hypervisor is not present [ 7.268432] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.293591] ALSA device list: [ 7.293688] No soundcards found. [ 7.293850] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.294706] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.295833] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.304545] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.310971] Extcon AUX1(HDMI) enable [ 7.314490] tegradc 15210000.display: disp1 connected to head1->sor [ 7.320911] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.328061] tegradc 15210000.display: DT parsed successfully [ 7.333976] tegradc 15210000.display: Display dc.00000000d0c19cae registered with id=1 [ 7.342432] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.348108] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.358398] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.361061] tegradc 15210000.display: probed [ 7.362427] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.374412] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.374417] usb 2-3: Manufacturer: Generic [ 7.382922] tegradc 15210000.display: fb registered [ 7.391268] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.395638] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.397530] Freeing unused kernel memory: 3968K [ 7.403138] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.413221] tegradc 15210000.display: blank - powerdown [ 7.417241] Run /init as init process [ 7.418275] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.418321] hub 2-3:1.0: USB hub found [ 7.422083] hub 2-3:1.0: 4 ports detected [ 7.430028] Extcon DP: HPD disabled [ 7.433780] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.438010] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.441459] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.448241] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.466577] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.473437] usb 1-3: new full-speed USB device number 3 using tegra-xusb ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.492553] tegradc 15200000.display: blank - powerdown [ 7.519416] Root device found: mmcblk0p1 [ 7.521574] Found dev node: /dev/mmcblk0p1 [ 7.535516] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.535521] Extcon AUX1(HDMI) disable [ 7.556469] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.558934] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.559835] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.560381] Rootfs mounted over mmcblk0p1 [ 7.572358] tegradc 15200000.display: unblank [ 7.573476] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.573669] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.579648] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.581631] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.586083] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.586086] Extcon AUX1(HDMI) enable [ 7.598444] tegradc 15200000.display: sync windows ret = 247 [ 7.603004] Switching from initrd to actual rootfs [ 7.628252] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.629826] Extcon HDMI: HPD enabled [ 7.630163] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.631122] tegradc 15200000.display: hdmi: plugged [ 7.635601] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.643104] usb 1-3: Product: Bluetooth Radio [ 7.647494] usb 1-3: Manufacturer: Realtek [ 7.651691] usb 1-3: SerialNumber: 00e04c000001 [ 7.797186] systemd[1]: System time before build time, advancing clock. [ 7.867422] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.872448] systemd[1]: Detected architecture arm64. [ 7.916312] systemd[1]: Set hostname to . [ 8.080388] systemd-sysv-generator[246]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.420644] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.422469] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.427947] systemd[1]: Created slice system-modprobe.slice. [ 8.432744] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.437083] systemd[1]: Created slice User and Session Slice. [ 8.440587] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.444857] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.448559] systemd[1]: Reached target User and Group Name Lookups. [ 8.451947] systemd[1]: Reached target Slices. [ 8.455144] systemd[1]: Reached target Swap. [ 8.459361] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.463210] systemd[1]: Listening on Syslog Socket. [ 8.466907] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.470459] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.474860] systemd[1]: Listening on Journal Audit Socket. [ 8.478727] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.482680] systemd[1]: Listening on Journal Socket. [ 8.486529] systemd[1]: Listening on udev Control Socket. [ 8.491695] systemd[1]: Listening on udev Kernel Socket. [ 8.501174] systemd[1]: Mounting Huge Pages File System... [ 8.509460] systemd[1]: Mounting POSIX Message Queue File System... [ 8.517623] systemd[1]: Mounting RPC Pipe File System... [ 8.526185] systemd[1]: Mounting Kernel Debug File System... [ 8.534992] systemd[1]: Mounting Kernel Trace File System... [ 8.545346] systemd[1]: Starting Journal Service... [ 8.554520] systemd[1]: Starting Set the console keyboard layout... [ 8.563062] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.566937] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.573680] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.582723] systemd[1]: Started Nameserver information manager. [ 8.587918] systemd[1]: Reached target Network (Pre). [ 8.595393] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.597430] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.605885] systemd[1]: Starting Load Kernel Modules... [ 8.613601] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.622815] systemd[1]: Starting udev Coldplug all Devices... [ 8.632703] systemd[1]: Mounted Huge Pages File System. [ 8.636459] systemd[1]: Mounted POSIX Message Queue File System. [ 8.640364] systemd[1]: Mounted RPC Pipe File System. [ 8.644056] systemd[1]: Mounted Kernel Debug File System. [ 8.644410] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.646187] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.649450] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.649457] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.649465] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.649470] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.649726] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.653105] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.658696] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.658710] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.665858] systemd[1]: Mounted Kernel Trace File System. [ 8.673194] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.677908] systemd[1]: nvfb-udev.service: Succeeded. [ 8.681820] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.692391] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.697681] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.699393] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.713961] systemd[1]: Starting Load/Save Random Seed... [ 8.722059] systemd[1]: Starting Create System Users... [ 8.754703] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.754703] [ 8.785917] systemd[1]: Finished Load/Save Random Seed. [ 8.793537] systemd[1]: Finished Load Kernel Modules. [ 8.800118] systemd[1]: Finished Create System Users. [ 8.804794] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.811396] systemd[1]: Mounting Kernel Configuration File System... [ 8.820223] systemd[1]: Started OP-TEE Client Supplicant. [ 8.828561] systemd[1]: Starting Apply Kernel Variables... [ 8.836486] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.847266] systemd[1]: Finished Set the console keyboard layout. [ 8.854164] systemd[1]: Mounted Kernel Configuration File System. [ 10.206632] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.213181] imx219 9-0010: board setup failed [ 10.214569] imx219: probe of 9-0010 failed with error -121 [ 10.226792] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.257065] imx219 10-0010: board setup failed [ 10.258326] imx219: probe of 10-0010 failed with error -121 [ 10.374848] hot-surface-alert cooling state: 0 -> 1 [ 10.962101] using random self ethernet address [ 10.998483] using random host ethernet address [ 11.803795] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.803801] Creating 1 MTD partitions on "spi6.0": [ 11.803813] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.409269] using random self ethernet address [ 12.411002] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.831647] nvidia: loading out-of-tree module taints kernel. [ 59.302838] watchdog: watchdog0: watchdog did not stop! [ 59.746769] Trying to unregister non-registered hwtime source [ 62.805371] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.807009] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] tiÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.340] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized pm_post initialized dbells initialized ÿä 11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.457] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.480] I> register 'maxim' power off handle [0003.483] I> virtual i2c enabled [0003.483] I> registered 'maxim,max20024' pmic [0003.483] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.487] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.617] E> invalid display type [0003.618] E> cannot find any other nvdisp nodes [0003.635] I> edid read success [0003.647] I> edid read success [0003.647] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.648] I> width = 1280, height = 768, frequency = 79500000 [0003.649] I> width = 1360, height = 768, frequency = 85500000 [0003.649] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.670] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.681] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.710] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 4096, height = 2160, frequency = 296703296 [0003.721] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.732] I> hdmi_enable, starting HDMI initialisation [0003.737] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.747] calling apps_init() [0003.748] starting app kernel_boot_app [0003.749] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000673] Console: colour dummy device 80x25 [ 0.002210] printk: console [tty0] enabled [ 0.002278] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002328] pid_max: default: 32768 minimum: 301 [ 0.002520] LSM: Security Framework initializing [ 0.002593] Yama: becoming mindful. [ 0.002655] SELinux: Initializing. [ 0.002820] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002869] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005953] rcu: Hierarchical SRCU implementation. [ 0.006274] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006974] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007036] DTB Build time: Aug 10 2022 20:31:49 [ 0.009760] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010095] Remapping and enabling EFI services. [ 0.012204] smp: Bringing up secondary CPUs ... [ 0.041402] Detected PIPT I-cache on CPU1 [ 0.041505] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071048] Detected PIPT I-cache on CPU2 [ 0.071125] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100672] Detected PIPT I-cache on CPU3 [ 0.100741] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130361] Detected PIPT I-cache on CPU4 [ 0.130560] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160171] Detected PIPT I-cache on CPU5 [ 0.160239] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160566] smp: Brought up 1 node, 6 CPUs [ 0.160825] SMP: Total of 6 processors activated. [ 0.160869] CPU features: detected: Privileged Access Never [ 0.160911] CPU features: detected: LSE atomic instructions [ 0.160925] CPU features: detected: User Access Override [ 0.160938] CPU features: detected: 32-bit EL0 Support [ 0.160951] CPU features: detected: RAS Extension Support [ 0.160963] CPU features: detected: CRC32 instructions [ 0.160975] CPU features: detected: 32-bit EL1 Support [ 0.225830] CPU: All CPU(s) started at EL2 [ 0.232072] devtmpfs: initialized [ 0.292588] Registered cp15_barrier emulation handler [ 0.292694] Registered setend emulation handler [ 0.292835] KASLR enabled [ 0.293115] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.293174] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.295585] pinctrl core: initialized pinctrl subsystem [ 0.296713] SMBIOS 3.0.0 present. [ 0.296757] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.297807] NET: Registered protocol family 16 [ 0.300479] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.301115] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.301627] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.301711] audit: initializing netlink subsys (disabled) [ 0.302026] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.302524] thermal_sys: Registered thermal governor 'step_wise' [ 0.302536] thermal_sys: Registered thermal governor 'power_allocator' [ 0.302562] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.305956] cpuidle: using governor menu [ 0.306406] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.306905] ASID allocator initialised with 32768 entries [ 0.307201] Serial: AMBA PL011 UART driver [ 0.310911] Tegra reboot handler registered. [ 0.371757] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.371897] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.372120] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.372163] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.372299] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.372340] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.372462] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.372504] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372660] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372701] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.375178] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.375211] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.375237] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.375263] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.375291] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375315] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.375338] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375361] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375385] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375408] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.375432] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.375455] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.375478] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.375501] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.375544] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.375568] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.375608] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.375729] mc-err: mcerr ops are set to t19x [ 0.386294] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.386315] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.386327] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.386338] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.392349] ACPI: Interpreter disabled. [ 0.393491] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.394757] iommu: Default domain type: Translated [ 0.394821] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.395167] SCSI subsystem initialized [ 0.395309] usbcore: registered new interface driver usbfs [ 0.395344] usbcore: registered new interface driver hub [ 0.395374] usbcore: registered new device driver usb [ 0.395764] mc: Linux media interface: v0.10 [ 0.395788] videodev: Linux video capture interface: v2.00 [ 0.396112] pps_core: LinuxPPS API ver. 1 registered [ 0.396124] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.396143] PTP clock support registered [ 0.396391] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.396657] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.396712] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.397371] Registered efivars operations [ 0.402632] FPGA manager framework [ 0.402726] Advanced Linux Sound Architecture Driver Initialized. [ 0.403276] Bluetooth: Core ver 2.22 [ 0.403318] NET: Registered protocol family 31 [ 0.403330] Bluetooth: HCI device and connection manager initialized [ 0.403345] Bluetooth: HCI socket layer initialized [ 0.403358] Bluetooth: L2CAP socket layer initialized [ 0.403380] Bluetooth: SCO socket layer initialized [ 0.404789] camchar: rtcpu character device driver loaded [ 0.405446] clocksource: Switched to clocksource arch_sys_counter [ 0.706107] VFS: Disk quotas dquot_6.6.0 [ 0.706212] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.706482] pnp: PnP ACPI: disabled [ 0.716285] la/ptsa driver initialized. [ 0.716400] NET: Registered protocol family 2 [ 0.716570] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.721932] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.722001] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.722315] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.722746] TCP: Hash tables configured (established 65536 bind 65536) [ 0.722879] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.722976] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.723183] NET: Registered protocol family 1 [ 0.723976] RPC: Registered named UNIX socket transport module. [ 0.723991] RPC: Registered udp transport module. [ 0.724000] RPC: Registered tcp transport module. [ 0.724009] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.724024] PCI: CLS 0 bytes, default 64 [ 0.724260] Trying to unpack rootfs image as initramfs... [ 0.908662] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.910589] Freeing initrd memory: 8196K [ 0.914390] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.914435] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.914491] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.914913] kvm [1]: IPA Size Limit: 40 bits [ 0.915469] kvm [1]: vgic interrupt IRQ9 [ 0.916032] kvm [1]: VHE mode initialized successfully [ 0.917236] Initialise system trusted keyrings [ 0.917534] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.920960] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.921614] NFS: Registering the id_resolver key type [ 0.921642] Key type id_resolver registered [ 0.921651] Key type id_legacy registered [ 0.921706] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.921723] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.921749] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.929651] NET: Registered protocol family 38 [ 0.929673] Key type asymmetric registered [ 0.929684] Asymmetric key parser 'x509' registered [ 0.929728] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.929900] io scheduler mq-deadline registered [ 0.929915] io scheduler kyber registered [ 0.935825] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.938721] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.938801] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.938902] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.939010] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.939119] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.944829] scrncapt: init (heads:4 wins:6 planes:4) [ 0.945059] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.946017] EINJ: ACPI disabled. [ 0.949361] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.949387] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.949402] tegra-pmc: ### PMC reset level: L1 [ 0.949416] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.949532] tegra-pmc: PMC Prod config success [ 0.954714] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.972381] random: fast init done [ 0.982886] printk: console [ttyTCU0] enabled [ 2.512350] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.516884] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.521512] arm-smmu 10000000.iommu: stage 1 translation [ 2.526761] arm-smmu 10000000.iommu: stage 2 translation [ 2.532515] arm-smmu 10000000.iommu: nested translation [ 2.537540] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.544705] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.555831] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.558079] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.564638] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.572518] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.577682] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.582400] arm-smmu 12000000.iommu: stage 1 translation [ 2.587652] arm-smmu 12000000.iommu: stage 2 translation [ 2.593336] arm-smmu 12000000.iommu: nested translation [ 2.598763] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.605684] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.616451] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.618808] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.625369] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.632835] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.642751] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.646098] tegra_profiler: auth: init [ 2.650338] THERMAL EST: found 3 subdevs [ 2.653462] THERMAL EST num_resources: 0 [ 2.657563] [THERMAL EST subdev 0] [ 2.660609] [THERMAL EST subdev 1] [ 2.664298] [THERMAL EST subdev 2] [ 2.667284] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.673715] THERMAL EST: thz register success. [ 2.677991] THERMAL EST: end of probe, return err: 0 [ 2.683559] nvsciipc: loaded module [ 2.690693] tun: Universal TUN/TAP device driver, 1.6 [ 2.692842] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.699078] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.704874] e1000e: Intel(R) PRO/1000 Network Driver [ 2.709568] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.715888] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.721174] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.727071] PPP generic driver version 2.4.2 [ 2.731656] PPP BSD Compression module registered [ 2.735902] PPP Deflate Compression module registered [ 2.741401] PPP MPPE Compression module registered [ 2.746420] usbcore: registered new interface driver r8152 [ 2.751919] usbcore: registered new interface driver asix [ 2.756999] usbcore: registered new interface driver ax88179_178a [ 2.763375] usbcore: registered new interface driver cdc_ether [ 2.769325] usbcore: registered new interface driver net1080 [ 2.774669] usbcore: registered new interface driver cdc_subset [ 2.780724] usbcore: registered new interface driver zaurus [ 2.786694] usbcore: registered new interface driver cdc_ncm [ 2.792341] usbcore: registered new interface driver aqc111 [ 2.798023] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.803799] ohci-pci: OHCI PCI platform driver [ 2.808132] ohci-platform: OHCI generic platform driver [ 2.814070] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.820334] usbcore: registered new interface driver uas [ 2.824395] usbcore: registered new interface driver usb-storage [ 2.830797] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.836521] mousedev: PS/2 mouse device common for all mice [ 2.841554] usbcore: registered new interface driver xpad [ 2.849640] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.852263] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.860348] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.866621] i2c /dev entries driver [ 2.870249] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.876027] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.881238] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.886803] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.892115] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.897635] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.903001] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.915569] device-mapper: uevent: version 1.0.3 [ 2.915949] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.922674] cpuidle: Initializing cpuidle driver [ 2.927138] sdhci: Secure Digital Host Controller Interface driver [ 2.932142] sdhci: Copyright(c) Pierre Ossman [ 2.935986] Synopsys Designware Multimedia Card Interface Driver [ 2.942150] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.948073] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.954405] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.961491] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.979664] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.988601] vdd-1v0: supplied by regulator-dummy [ 2.994043] vdd-1v8-hs: supplied by regulator-dummy [ 2.998790] vdd-1v8-ls: supplied by regulator-dummy [ 3.003444] vdd-1v8-ao: supplied by regulator-dummy [ 3.007268] vddio-ddr-1v1: supplied by regulator-dummy [ 3.011627] vdd-rtc: supplied by regulator-dummy [ 3.013180] spmic-ldo1: supplied by regulator-dummy [ 3.014336] vdd-ao-3v3: supplied by regulator-dummy [ 3.020383] vddio-emmc-3v3: supplied by regulator-dummy [ 3.026502] spmic-ldo4: supplied by regulator-dummy [ 3.027610] vdd-usb-3v3: supplied by regulator-dummy [ 3.033660] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.039686] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.045113] spmic-ldo8: supplied by vdd-1v8-ls [ 3.046486] gpio-510 (gpio_default): hogged as output/high [ 3.048118] gpio-511 (gpio_default): hogged as output/high [ 3.055024] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.193841] max77686-rtc max77620-rtc: registered as rtc0 [ 3.194860] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.195155] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.933120] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.934163] hid: raw HID events driver (C) Jiri Kosina [ 3.934806] usbcore: registered new interface driver usbhid [ 3.934972] usbhid: USB HID core driver [ 3.936700] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.937844] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.985330] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.060852] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 76.330 ms) ÿá[ 4.023058] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.023497] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.024402] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.025065] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.026774] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.027237] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.027751] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.028808] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.028998] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.031241] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.038983] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.046053] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.050232] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.057627] denver_knobs_init:MTS_VERSION:55637613 [ 4.069821] t19x_cache tegra-cache: probed [ 4.072895] optee: probing for conduit method. [ 4.073860] optee: revision 3.16 (65cc2218) [ 4.074829] optee: dynamic shared memory is enabled [ 4.078063] optee: initialized driver [ 4.084708] nvpmodel: initialized successfully [ 4.085725] tegra_hv: get_hvd: not initialized yet [ 4.090428] user_ivc_mempool: hypervisor not present [ 4.096305] usbcore: registered new interface driver snd-usb-audio [ 4.102723] u32 classifier [ 4.104168] input device check on [ 4.108019] Actions configured [ 4.111272] Initializing XFRM netlink socket [ 4.116208] NET: Registered protocol family 10 [ 4.122253] Segment Routing with IPv6 [ 4.123790] NET: Registered protocol family 17 [ 4.127791] NET: Registered protocol family 15 [ 4.132478] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.146358] Bluetooth: RFCOMM socket layer initialized [ 4.150762] Bluetooth: RFCOMM ver 1.11 [ 4.154421] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.160478] Bluetooth: HIDP socket layer initialized [ 4.166196] 9pnet: Installing 9P2000 support [ 4.169712] Key type dns_resolver registered [ 4.175171] registered taskstats version 1 [ 4.178338] Loading compiled-in X.509 certificates [ 4.189531] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.193925] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.203618] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.206318] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.214599] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.223121] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.337541] tegra194-pcie 14160000.pcie: Link up [ 4.340580] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.340768] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.340895] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.341083] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.341238] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.341649] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.342063] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.353923] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.354479] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.354904] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.356344] pci 0004:01:00.0: supports D1 D2 [ 4.356473] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.365803] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.366053] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.366420] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.366742] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.366986] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.367160] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.372141] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.379495] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.388304] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.398571] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.403070] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.408481] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.415371] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.424586] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.426001] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.434709] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.442894] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.545628] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.546199] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.546454] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.546643] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.546924] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.547114] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.547476] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.547907] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.562565] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.562902] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.564828] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.566349] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.567591] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.568792] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.569761] pci 0005:00:00.0: Removing from iommu group 7 [ 5.570062] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.600871] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.621844] host1x 13e10000.host1x: initialized [ 5.623363] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.624238] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.625360] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.626111] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.627143] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.627684] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.628680] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.629306] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.639167] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.646002] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.655857] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.662662] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.672460] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.679848] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.689766] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.696590] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.706470] falcon 15340000.vic: Adding to iommu group 17 [ 5.720716] falcon 15340000.vic: initialized [ 5.721930] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.727023] falcon 15380000.nvjpg: initialized [ 5.727491] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.739307] falcon 154c0000.nvenc: initialized [ 5.739850] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.749599] falcon 15a80000.nvenc1: initialized [ 5.750210] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.762045] nvdec 15480000.nvdec: initialized [ 5.762676] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.771280] nvdec 15140000.nvdec1: initialized [ 5.771893] tsec 15500000.tsec: Adding to iommu group 18 [ 5.777559] tsec 15500000.tsec: initialized [ 5.778029] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.786496] tsec 15100000.tsecb: initialized [ 5.789983] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.815280] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.827105] gpio-374 (wifi-enable): hogged as output/high [ 5.827490] gpio-431 (camera-control-output-low): hogged as output/low [ 5.827831] gpio-432 (camera-control-output-low): hogged as output/low [ 5.829284] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.830886] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.831387] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.837877] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.843049] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.849276] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.854406] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.862584] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.870048] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.881087] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.886957] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.892927] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.901501] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.910710] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.918107] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.925554] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.932118] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.941366] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.947699] pva 16000000.pva0: Adding to iommu group 22 [ 5.973948] pva 16000000.pva0: initialized [ 5.978713] pva 16800000.pva1: Adding to iommu group 23 [ 5.989319] pva 16800000.pva1: initialized [ 5.992962] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.013417] nvdla 15880000.nvdla0: initialized [ 6.014736] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.023585] nvdla 158c0000.nvdla1: initialized [ 6.025857] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.026115] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.026413] tegradccommon 15200000.display-hub: dma mapping done [ 6.028123] tegradc 15200000.display: Adding to iommu group 26 [ 6.035399] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.035803] generic_infoframe_type: 0x87 [ 6.036076] tegradc 15200000.display: DT parsed successfully [ 6.036372] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.038345] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.039683] tegradc 15210000.display: Adding to iommu group 26 [ 6.044157] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.052517] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.055706] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.063881] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.070150] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.077902] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.079208] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.084351] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.091723] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.093134] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.098003] tegra_cec 3960000.tegra_cec: probed [ 6.107698] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.110746] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.120596] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.127025] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.134175] tegradc 15210000.display: disp0 connected to head1->sor [ 6.138097] kfuse 3830000.kfuse: initialized [ 6.144545] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.151773] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.157809] tegradc 15210000.display: DT parsed successfully [ 6.161793] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.162379] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.169148] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.171733] random: crng init done [ 6.205383] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.215262] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.220524] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.229759] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.235083] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.256125] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.256481] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.258254] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.266987] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.275255] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.281977] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.289584] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.296551] usb usb1: Product: xHCI Host Controller [ 6.301786] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.308084] usb usb1: SerialNumber: 3610000.xhci [ 6.313818] hub 1-0:1.0: USB hub found [ 6.316399] hub 1-0:1.0: 4 ports detected [ 6.320963] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.326097] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.333415] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.341026] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.349243] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.356471] usb usb2: Product: xHCI Host Controller [ 6.361473] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.367701] usb usb2: SerialNumber: 3610000.xhci [ 6.372925] hub 2-0:1.0: USB hub found [ 6.375885] hub 2-0:1.0: 4 ports detected [ 6.416266] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.422258] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.423473] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.423648] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.436001] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.437092] tegra194-cpufreq ccplex: probed with BWMGR [ 6.438304] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.438839] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.439287] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.440391] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.449613] mmc0: CQHCI version 5.10 [ 6.451536] tegra194-vi5 15c10000.vi: initialized [ 6.454567] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.455801] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.460042] generic_infoframe_type: 0x87 [ 6.466538] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.470007] tegradc 15200000.display: DT parsed successfully [ 6.478328] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.483870] tegradc 15200000.display: Display dc.0000000081f1f9be registered with id=0 [ 6.490158] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.499734] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.504876] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.504884] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.512795] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.513353] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.513361] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.525521] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.526328] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.533936] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.542065] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.550196] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.551474] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.556823] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.570379] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.575505] nvethernet 2490000.ethernet: Macsec not supported [ 6.582399] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.591671] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.598886] mmc0: Command Queue Engine enabled [ 6.598891] mmc0: periodic cache flush enabled [ 6.598908] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.599390] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.599544] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.611072] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.612551] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.614051] ************************************** [ 6.614055] CPU:0, Error:cbb-noc [ 6.614059] Error Logger : 0 [ 6.614069] ErrLog0 : 0x80030000 [ 6.614073] Transaction Type : RD - Read, Incrementing [ 6.614076] Error Code : SLV [ 6.614084] Error Source : Target [ 6.621813] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.625480] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.629191] Error Description : Target error detected by CBB slave [ 6.629203] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.629218] Packet header Lock : 0 [ 6.633861] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.638285] Packet header Len1 : 3 [ 6.638289] NOC protocol version : version >= 2.7 [ 6.638293] ErrLog1 : 0x352426 [ 6.638296] ErrLog2 : 0x0 [ 6.638300] RouteId : 0x352426 [ 6.638303] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.638307] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.638315] TargSubRange : 18 [ 6.645893] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.649310] SeqId : 0 [ 6.649317] ErrLog3 : 0x4045c [ 6.776364] ErrLog4 : 0x0 [ 6.779250] Address accessed : 0x15b4045c [ 6.783623] ErrLog5 : 0x989f851 [ 6.787036] Non-Modify : 0x1 [ 6.790447] AXI ID : 0x13 [ 6.793597] Master ID : CCPLEX [ 6.797012] Security Group(GRPSEC): 0x7e [ 6.801122] Cache : 0x1 -- Bufferable [ 6.805324] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.811802] FALCONSEC : 0x0 [ 6.815209] Virtual Queuing Channel(VQC): 0x0 [ 6.819936] ************************************** [ 6.824516] ------------[ cut here ]------------ [ 6.829473] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.835949] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.840854] Modules linked in: [ 6.843834] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 6.850479] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.862737] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.869031] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 6.873768] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 6.878220] sp : ffff800010003b30 [ 6.881890] x29: ffff800010003b30 x28: 0000000000000001 [ 6.887054] x27: 0000000000000005 x26: ffffcf92c6403f58 [ 6.892735] x25: ffffcf92c6d5ce10 x24: 0000000000000001 [ 6.897904] x23: ffffcf92c66f7000 x22: ffffcf92c6b7ea00 [ 6.903241] x21: 000000000000000f x20: ffff56a580ecab80 [ 6.909030] x19: ffffcf92c6b7ea00 x18: 0000000000000010 [ 6.914435] x17: 0000000000004000 x16: 00000000f985d2ae [ 6.919772] x15: ffffcf92c69f2bf0 x14: 0720072007200720 [ 6.925285] x13: 0720072007200720 x12: 0720072007200720 [ 6.930798] x11: 0720072007200720 x10: 0720072007200720 [ 6.936311] x9 : 0720072007200720 x8 : 07200720072a072a [ 6.941565] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 6.947338] x5 : 0000000000057fa8 x4 : ffffcf92c6a07968 [ 6.952504] x3 : 00000000ffffffff x2 : ffffcf92c4e9e090 [ 6.958097] x1 : ffffcf92c69f2680 x0 : 0000000100010101 [ 6.963178] Call trace: [ 6.965891] tegra194_cbb_err_isr+0x190/0x1b0 [ 6.969922] __handle_irq_event_percpu+0x68/0x2a0 [ 6.974642] handle_irq_event_percpu+0x40/0xa0 [ 6.979187] handle_irq_event+0x50/0xf0 [ 6.982691] handle_fasteoi_irq+0xc0/0x170 [ 6.986978] generic_handle_irq+0x40/0x60 [ 6.991001] __handle_domain_irq+0x70/0xd0 [ 6.994945] efi_header_end+0xb0/0xf0 [ 6.998699] el1_irq+0xd0/0x180 [ 7.001417] __do_softirq+0xb4/0x3e8 [ 7.005093] irq_exit+0xc0/0xe0 [ 7.008086] __handle_domain_irq+0x74/0xd0 [ 7.012349] efi_header_end+0xb0/0xf0 [ 7.016024] el1_irq+0xd0/0x180 [ 7.019019] cpuidle_enter_state+0xb8/0x410 [ 7.022766] cpuidle_enter+0x40/0x60 [ 7.026700] call_cpuidle+0x44/0x80 [ 7.030199] do_idle+0x208/0x270 [ 7.033179] cpu_startup_entry+0x2c/0x70 [ 7.037034] rest_init+0xdc/0xe8 [ 7.040445] arch_call_rest_init+0x18/0x20 [ 7.044900] start_kernel+0x514/0x54c [ 7.048239] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.054708] ---[ end trace 04a4deef10b8dfb5 ]--- [ 7.058993] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.066517] SMP: stopping secondary CPUs [ 7.070466] Kernel Offset: 0x4f92b4ce0000 from 0xffff800010000000 [ 7.076922] PHYS_OFFSET: 0xffffa95b80000000 [ 7.080778] CPU features: 0x8240002,03802a30 [ 7.085239] Memory Limit: none [ 7.088653] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.583] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.585] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC:ÿâmail_early initialized ÿä Nÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure exterÿâec initialized ÿänÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäDT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.204] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.205] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.206] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.213] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.222] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.244] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.253] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.262] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.271] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.280] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.302] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.311] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.320] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.329] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.338] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.360] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.369] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.378] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.387] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.396] GIC-SPI Target CPU: 0 [0003.399] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.429] initializing platform [0003.432] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.441] I> Bl_dtb @0xadf00000 [0003.444] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.466] I> fixed regulator driver initialized [0003.478] I> register 'maxim' power off handle [0003.480] I> virtual i2c enabled [0003.480] I> registered 'maxim,max20024' pmic [0003.480] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.486] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.493] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.519] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.530] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.538] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.551] I> sdmmc-3 params source = safe params [0003.558] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.587] I> regulator 'vdd-hdmi-5v0' already enabled [0003.592] I> regulator 'vdd-hdmi-5v0' already enabled [0003.593] I> hdmi cable connected [0003.597] W> set volts not configured for 'vdd-1v0' [0003.602] W> set volts not configured for 'vdd-1v8-hs' [0003.602] I> retrieved tmds range from prod_list_hdmi_soc [0003.608] E> invalid display type [0003.609] E> cannot find any other nvdisp nodes [0003.625] I> edid read success [0003.637] I> edid read success [0003.638] I> width = 640, height = 480, frequency = 25174825 [0003.638] I> width = 1920, height = 1080, frequency = 148500000 [0003.638] I> width = 1280, height = 768, frequency = 79500000 [0003.639] I> width = 1360, height = 768, frequency = 85500000 [0003.639] I> width = 720, height = 480, frequency = 26973026 [0003.643] I> width = 720, height = 576, frequency = 26973026 [0003.649] I> width = 1280, height = 720, frequency = 74175824 [0003.654] I> width = 1280, height = 720, frequency = 74175824 [0003.660] I> width = 1920, height = 1080, frequency = 148351648 [0003.666] I> width = 1920, height = 1080, frequency = 148351648 [0003.671] I> width = 720, height = 480, frequency = 26973026 [0003.677] I> width = 720, height = 576, frequency = 26973026 [0003.682] I> width = 3840, height = 2160, frequency = 296703296 [0003.688] I> width = 3840, height = 2160, frequency = 296703296 [0003.694] I> width = 3840, height = 2160, frequency = 296703296 [0003.700] I> width = 3840, height = 2160, frequency = 296703296 [0003.706] I> width = 4096, height = 2160, frequency = 296703296 [0003.711] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.723] I> hdmi_enable, starting HDMI initialisation [0003.728] I> hdmi_enable, HDMI initialisation complete [0003.737] initializing target [0003.738] calling apps_init() [0003.738] starting app kernel_boot_app [0003.739] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000658] Console: colour dummy device 80x25 [ 0.002046] printk: console [tty0] enabled [ 0.002108] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002143] pid_max: default: 32768 minimum: 301 [ 0.002303] LSM: Security Framework initializing [ 0.002359] Yama: becoming mindful. [ 0.002400] SELinux: Initializing. [ 0.002575] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002632] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005459] rcu: Hierarchical SRCU implementation. [ 0.005691] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006378] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006429] DTB Build time: Aug 10 2022 20:31:49 [ 0.009197] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009430] Remapping and enabling EFI services. [ 0.011428] smp: Bringing up secondary CPUs ... [ 0.044894] Detected PIPT I-cache on CPU1 [ 0.044991] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074420] Detected PIPT I-cache on CPU2 [ 0.074571] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104113] Detected PIPT I-cache on CPU3 [ 0.104203] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133932] Detected PIPT I-cache on CPU4 [ 0.134095] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163785] Detected PIPT I-cache on CPU5 [ 0.163924] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164368] smp: Brought up 1 node, 6 CPUs [ 0.164560] SMP: Total of 6 processors activated. [ 0.164616] CPU features: detected: Privileged Access Never [ 0.164638] CPU features: detected: LSE atomic instructions [ 0.164651] CPU features: detected: User Access Override [ 0.164695] CPU features: detected: 32-bit EL0 Support [ 0.164708] CPU features: detected: RAS Extension Support [ 0.164721] CPU features: detected: CRC32 instructions [ 0.164733] CPU features: detected: 32-bit EL1 Support [ 0.236540] CPU: All CPU(s) started at EL2 [ 0.243037] devtmpfs: initialized [ 0.290648] Registered cp15_barrier emulation handler [ 0.290766] Registered setend emulation handler [ 0.290789] KASLR enabled [ 0.291024] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291046] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292367] pinctrl core: initialized pinctrl subsystem [ 0.293312] SMBIOS 3.0.0 present. [ 0.293340] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.293908] NET: Registered protocol family 16 [ 0.296035] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.296554] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297249] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297306] audit: initializing netlink subsys (disabled) [ 0.297537] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.298019] thermal_sys: Registered thermal governor 'step_wise' [ 0.298025] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298038] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.300560] cpuidle: using governor menu [ 0.301010] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.301401] ASID allocator initialised with 32768 entries [ 0.301635] Serial: AMBA PL011 UART driver [ 0.305218] Tegra reboot handler registered. [ 0.382742] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.382859] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.383032] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.383074] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.383221] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.383265] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.383381] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.383422] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.383541] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.383582] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.385727] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.385760] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.385786] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.385811] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.385839] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.385864] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.385889] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.385914] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.385941] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.385989] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.386014] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.386055] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.386081] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.386124] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.386149] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.386173] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.386198] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.386294] mc-err: mcerr ops are set to t19x [ 0.399646] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.399671] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.399684] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.399696] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.405661] ACPI: Interpreter disabled. [ 0.406839] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.408031] iommu: Default domain type: Translated [ 0.408103] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.408536] SCSI subsystem initialized [ 0.408712] usbcore: registered new interface driver usbfs [ 0.408758] usbcore: registered new interface driver hub [ 0.408793] usbcore: registered new device driver usb [ 0.409196] mc: Linux media interface: v0.10 [ 0.409229] videodev: Linux video capture interface: v2.00 [ 0.409554] pps_core: LinuxPPS API ver. 1 registered [ 0.409568] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.409590] PTP clock support registered [ 0.409771] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.410067] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.410121] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.410793] Registered efivars operations [ 0.416968] FPGA manager framework [ 0.417072] Advanced Linux Sound Architecture Driver Initialized. [ 0.417677] Bluetooth: Core ver 2.22 [ 0.417718] NET: Registered protocol family 31 [ 0.417730] Bluetooth: HCI device and connection manager initialized [ 0.417745] Bluetooth: HCI socket layer initialized [ 0.417760] Bluetooth: L2CAP socket layer initialized [ 0.417781] Bluetooth: SCO socket layer initialized [ 0.420024] camchar: rtcpu character device driver loaded [ 0.421302] clocksource: Switched to clocksource arch_sys_counter [ 0.876066] VFS: Disk quotas dquot_6.6.0 [ 0.876186] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.876597] pnp: PnP ACPI: disabled [ 0.891755] la/ptsa driver initialized. [ 0.891955] NET: Registered protocol family 2 [ 0.892204] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.899991] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.900087] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.900449] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.901079] TCP: Hash tables configured (established 65536 bind 65536) [ 0.901256] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.901454] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.901728] NET: Registered protocol family 1 [ 0.902584] RPC: Registered named UNIX socket transport module. [ 0.902622] RPC: Registered udp transport module. [ 0.902640] RPC: Registered tcp transport module. [ 0.902657] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.902698] PCI: CLS 0 bytes, default 64 [ 0.903036] Trying to unpack rootfs image as initramfs... [ 1.168733] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.171869] Freeing initrd memory: 8196K [ 1.176853] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.176895] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.176938] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.177247] kvm [1]: IPA Size Limit: 40 bits [ 1.177772] kvm [1]: vgic interrupt IRQ9 [ 1.178324] kvm [1]: VHE mode initialized successfully [ 1.179799] Initialise system trusted keyrings [ 1.180203] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.186434] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.187339] NFS: Registering the id_resolver key type [ 1.187385] Key type id_resolver registered [ 1.187429] Key type id_legacy registered [ 1.187520] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.187560] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.187635] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.197626] NET: Registered protocol family 38 [ 1.197650] Key type asymmetric registered [ 1.197666] Asymmetric key parser 'x509' registered [ 1.197717] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.198072] io scheduler mq-deadline registered [ 1.198092] io scheduler kyber registered [ 1.204266] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.207587] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.207695] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.207794] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.207881] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.207955] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.213625] scrncapt: init (heads:4 wins:6 planes:4) [ 1.213913] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.214832] EINJ: ACPI disabled. [ 1.218347] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.218373] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.218388] tegra-pmc: ### PMC reset level: L1 [ 1.218401] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.218476] tegra-pmc: PMC Prod config success [ 1.223586] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.250592] random: fast init done [ 1.251589] printk: console [ttyTCU0] enabled [ 2.780881] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.785105] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.789907] arm-smmu 10000000.iommu: stage 1 translation [ 2.795098] arm-smmu 10000000.iommu: stage 2 translation [ 2.800863] arm-smmu 10000000.iommu: nested translation [ 2.806214] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.813123] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.823880] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.826770] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.833326] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.840900] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.846110] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.850834] arm-smmu 12000000.iommu: stage 1 translation [ 2.856600] arm-smmu 12000000.iommu: stage 2 translation [ 2.861771] arm-smmu 12000000.iommu: nested translation [ 2.867490] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.874634] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.885156] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.887498] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.894316] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.901811] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.911324] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.914754] tegra_profiler: auth: init [ 2.919038] THERMAL EST: found 3 subdevs [ 2.922154] THERMAL EST num_resources: 0 [ 2.926266] [THERMAL EST subdev 0] [ 2.929322] [THERMAL EST subdev 1] [ 2.932968] [THERMAL EST subdev 2] [ 2.935975] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.942720] THERMAL EST: thz register success. [ 2.946951] THERMAL EST: end of probe, return err: 0 [ 2.952006] nvsciipc: loaded module [ 2.959447] tun: Universal TUN/TAP device driver, 1.6 [ 2.961822] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.967988] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.973340] e1000e: Intel(R) PRO/1000 Network Driver [ 2.978496] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.984321] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.989870] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.995767] PPP generic driver version 2.4.2 [ 3.000073] PPP BSD Compression module registered [ 3.004577] PPP Deflate Compression module registered [ 3.009825] PPP MPPE Compression module registered [ 3.014874] usbcore: registered new interface driver r8152 [ 3.020360] usbcore: registered new interface driver asix [ 3.025939] usbcore: registered new interface driver ax88179_178a [ 3.032072] usbcore: registered new interface driver cdc_ether [ 3.037756] usbcore: registered new interface driver net1080 [ 3.043357] usbcore: registered new interface driver cdc_subset [ 3.049665] usbcore: registered new interface driver zaurus [ 3.055357] usbcore: registered new interface driver cdc_ncm [ 3.061033] usbcore: registered new interface driver aqc111 [ 3.066700] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.072740] ohci-pci: OHCI PCI platform driver [ 3.076789] ohci-platform: OHCI generic platform driver [ 3.082634] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.089384] usbcore: registered new interface driver uas [ 3.093342] usbcore: registered new interface driver usb-storage [ 3.099224] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.105522] mousedev: PS/2 mouse device common for all mice [ 3.110276] usbcore: registered new interface driver xpad [ 3.118639] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.120962] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.128775] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.135359] i2c /dev entries driver [ 3.138917] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.144672] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.150048] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.155406] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.160767] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.166327] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.171463] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.184748] device-mapper: uevent: version 1.0.3 [ 3.185147] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.191889] cpuidle: Initializing cpuidle driver [ 3.196159] sdhci: Secure Digital Host Controller Interface driver [ 3.200843] sdhci: Copyright(c) Pierre Ossman [ 3.204709] Synopsys Designware Multimedia Card Interface Driver [ 3.210910] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.217116] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.217958] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.230110] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.253390] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.262907] vdd-1v0: supplied by regulator-dummy [ 3.268426] vdd-1v8-hs: supplied by regulator-dummy [ 3.273345] vdd-1v8-ls: supplied by regulator-dummy [ 3.278220] vdd-1v8-ao: supplied by regulator-dummy [ 3.282175] vddio-ddr-1v1: supplied by regulator-dummy [ 3.286946] vdd-rtc: supplied by regulator-dummy [ 3.288727] spmic-ldo1: supplied by regulator-dummy [ 3.290029] vdd-ao-3v3: supplied by regulator-dummy [ 3.296313] vddio-emmc-3v3: supplied by regulator-dummy [ 3.302618] spmic-ldo4: supplied by regulator-dummy [ 3.303896] vdd-usb-3v3: supplied by regulator-dummy [ 3.310108] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.316331] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.322026] spmic-ldo8: supplied by vdd-1v8-ls [ 3.323532] gpio-510 (gpio_default): hogged as output/high [ 3.324893] gpio-511 (gpio_default): hogged as output/high [ 3.327929] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.463914] max77686-rtc max77620-rtc: registered as rtc0 [ 3.465232] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.465588] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.294132] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.295366] hid: raw HID events driver (C) Jiri Kosina [ 4.296162] usbcore: registered new interface driver usbhid [ 4.296315] usbhid: USB HID core driver [ 4.298324] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.299529] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.257924] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.332737] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 75.623 ms) ÿá[ 4.384216] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.384894] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.386030] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.386782] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.388450] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.389110] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.389777] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.390939] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.391267] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.392996] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.400321] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.406975] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.411735] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.418073] denver_knobs_init:MTS_VERSION:55637613 [ 4.430359] t19x_cache tegra-cache: probed [ 4.434258] optee: probing for conduit method. [ 4.435143] optee: revision 3.16 (65cc2218) [ 4.436186] optee: dynamic shared memory is enabled [ 4.439228] optee: initialized driver [ 4.446351] nvpmodel: initialized successfully [ 4.446938] tegra_hv: get_hvd: not initialized yet [ 4.451177] user_ivc_mempool: hypervisor not present [ 4.457475] usbcore: registered new interface driver snd-usb-audio [ 4.463641] u32 classifier [ 4.464937] input device check on [ 4.468676] Actions configured [ 4.472608] Initializing XFRM netlink socket [ 4.477519] NET: Registered protocol family 10 [ 4.483732] Segment Routing with IPv6 [ 4.484549] NET: Registered protocol family 17 [ 4.489097] NET: Registered protocol family 15 [ 4.493248] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.506577] Bluetooth: RFCOMM socket layer initialized [ 4.511750] Bluetooth: RFCOMM ver 1.11 [ 4.515422] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.521504] Bluetooth: HIDP socket layer initialized [ 4.527208] 9pnet: Installing 9P2000 support [ 4.530929] Key type dns_resolver registered [ 4.535998] registered taskstats version 1 [ 4.539112] Loading compiled-in X.509 certificates [ 4.552129] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.555063] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.565459] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.567312] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.575668] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.584299] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.701407] tegra194-pcie 14160000.pcie: Link up [ 4.704431] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.704608] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.704744] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.705181] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.705416] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.705798] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.706269] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.720227] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.720993] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.721616] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.723191] pci 0004:01:00.0: supports D1 D2 [ 4.723364] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.735249] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.735723] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.736111] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.736611] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.737029] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.737215] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.737614] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.743335] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.751849] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.762248] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.766816] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.772919] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.779905] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.789021] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.789803] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.798518] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.806732] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.917839] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.918303] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.918560] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.918749] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.919027] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.919310] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.919722] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.920237] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.939900] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.940450] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.942358] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.944049] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.945870] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.947523] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.948704] pci 0005:00:00.0: Removing from iommu group 7 [ 5.949082] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.985025] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.010521] host1x 13e10000.host1x: initialized [ 6.012429] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.013408] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.014666] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.015438] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.016776] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.017660] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.018786] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.019463] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.020460] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.021037] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.028086] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.034758] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.044819] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.051965] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.061750] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.068906] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.078572] falcon 15340000.vic: Adding to iommu group 17 [ 6.094222] falcon 15340000.vic: initialized [ 6.095232] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.101639] falcon 15380000.nvjpg: initialized [ 6.102396] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.111679] falcon 154c0000.nvenc: initialized [ 6.112307] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.122003] falcon 15a80000.nvenc1: initialized [ 6.122641] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.134120] nvdec 15480000.nvdec: initialized [ 6.134770] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.145077] nvdec 15140000.nvdec1: initialized [ 6.145759] tsec 15500000.tsec: Adding to iommu group 18 [ 6.151769] tsec 15500000.tsec: initialized [ 6.152415] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.158762] tsec 15100000.tsecb: initialized [ 6.162968] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.192334] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.205787] gpio-374 (wifi-enable): hogged as output/high [ 6.206033] gpio-431 (camera-control-output-low): hogged as output/low [ 6.206410] gpio-432 (camera-control-output-low): hogged as output/low [ 6.208081] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.209906] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.210552] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.212023] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.215315] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.221273] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.226926] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.235245] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.242292] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.254056] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.258894] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.264828] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.273982] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.282910] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.290079] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.297872] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.304303] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.313745] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.320160] pva 16000000.pva0: Adding to iommu group 22 [ 6.348142] pva 16000000.pva0: initialized [ 6.353252] pva 16800000.pva1: Adding to iommu group 23 [ 6.365174] pva 16800000.pva1: initialized [ 6.370622] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.392672] nvdla 15880000.nvdla0: initialized [ 6.394084] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.403411] nvdla 158c0000.nvdla1: initialized [ 6.407581] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.407606] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.407884] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.408055] tegradc 15210000.display: Adding to iommu group 26 [ 6.408216] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.409062] tegradccommon 15200000.display-hub: dma mapping done [ 6.409153] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.410765] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.411157] tegra_cec 3960000.tegra_cec: probed [ 6.414780] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.415746] tegradc 15200000.display: Adding to iommu group 26 [ 6.415806] tegradc 15210000.display: disp0 connected to head1->sor [ 6.415891] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.415995] tegradc 15210000.display: DT parsed successfully [ 6.416004] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.419890] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.426895] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.433608] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.439719] generic_infoframe_type: 0x87 [ 6.445457] kfuse 3830000.kfuse: initialized [ 6.452470] tegradc 15200000.display: DT parsed successfully [ 6.459236] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.464934] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.471617] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.472238] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.479583] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.492314] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.500098] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.500105] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.501135] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.508325] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.512580] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.514116] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.538070] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.549755] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.552913] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.559147] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.583809] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.624184] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.624508] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.627821] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.636456] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.644920] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.651224] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.658975] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.666080] usb usb1: Product: xHCI Host Controller [ 6.671110] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.677442] usb usb1: SerialNumber: 3610000.xhci [ 6.682787] hub 1-0:1.0: USB hub found [ 6.686072] hub 1-0:1.0: 4 ports detected [ 6.690724] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.695390] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.702741] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.710713] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.718544] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.725829] usb usb2: Product: xHCI Host Controller [ 6.730519] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.736773] usb usb2: SerialNumber: 3610000.xhci [ 6.742000] hub 2-0:1.0: USB hub found [ 6.745484] hub 2-0:1.0: 4 ports detected [ 6.785146] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.791803] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.793254] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.793527] random: crng init done [ 6.793703] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.807204] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.808301] tegra194-cpufreq ccplex: probed with BWMGR [ 6.809610] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.810085] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.810521] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.811711] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.820771] mmc0: CQHCI version 5.10 [ 6.823129] tegra194-vi5 15c10000.vi: initialized [ 6.827410] tegradc 15210000.display: disp0 connected to head1->sor [ 6.828546] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.832269] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.838946] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.846096] tegradc 15210000.display: DT parsed successfully [ 6.853771] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.859646] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.859756] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.865778] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.865783] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.865788] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.873356] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.873964] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.880055] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.880099] generic_infoframe_type: 0x87 [ 6.880150] tegradc 15200000.display: DT parsed successfully [ 6.880183] tegradc 15200000.display: Display dc.000000006147dca0 registered with id=0 [ 6.887177] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.893598] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.894892] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.900286] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.914162] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.914577] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.920816] nvethernet 2490000.ethernet: Macsec not supported [ 6.922125] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.924754] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.931874] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.938651] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.946910] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.957328] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.961329] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.962114] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.962119] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.964352] tegradc 15200000.display: probed [ 6.981404] mmc0: Command Queue Engine enabled [ 6.985551] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.989680] mmc0: periodic cache flush enabled [ 6.989698] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.064798] tegra-se-nvhost 15810000.se: initialized [ 7.071888] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.091703] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.092072] Console: switching to colour frame buffer device 240x67 [ 7.095789] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.099096] tegradc 15200000.display: fb registered [ 7.105852] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.105910] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.111580] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.117201] tegra-se-nvhost 15820000.se: initialized [ 7.123443] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.132352] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.136637] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.141460] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.160842] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.166257] tegra-se-nvhost 15830000.se: initialized [ 7.173694] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.173699] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.173703] usb 1-2: Manufacturer: Generic [ 7.175861] hub 1-2:1.0: USB hub found [ 7.179524] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.187308] hub 1-2:1.0: 4 ports detected [ 7.191101] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.216081] tegra-se-nvhost 15840000.se: initialized [ 7.216134] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.221718] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.230359] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.236527] tegra_actmon d230000.actmon: in actmon_register()... [ 7.243074] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.243739] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.249304] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.256718] Extcon AUX1(HDMI) enable [ 7.256856] tegradc 15210000.display: disp1 connected to head1->sor [ 7.264106] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.269468] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.273227] hvc_sysfs: hypervisor is not present [ 7.278760] tegradc 15210000.display: DT parsed successfully [ 7.286183] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.312067] tegradc 15210000.display: Display dc.00000000b1670d33 registered with id=1 [ 7.314220] ALSA device list: [ 7.320551] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.323220] No soundcards found. [ 7.327025] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.329276] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.332871] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.347746] tegradc 15210000.display: probed [ 7.354729] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.354739] usb 2-3: Manufacturer: Generic [ 7.367820] tegradc 15210000.display: fb registered [ 7.371164] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.374734] Freeing unused kernel memory: 3968K [ 7.380031] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.380043] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.389520] hub 2-3:1.0: USB hub found [ 7.397544] Run /init as init process [ 7.399574] hub 2-3:1.0: 4 ports detected ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.409616] tegradc 15200000.display: blank - powerdown [ 7.449347] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.449847] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.449851] Extcon AUX1(HDMI) disable [ 7.457327] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.457332] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.473246] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.474113] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.487105] tegradc 15200000.display: unblank [ 7.488221] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.488420] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.494400] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.496256] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.500238] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.500242] Extcon AUX1(HDMI) enable [ 7.513012] tegradc 15200000.display: sync windows ret = 247 [ 7.541880] tegradc 15210000.display: blank - powerdown [ 7.543377] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.543381] Extcon DP: HPD disabled [ 7.543385] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.543396] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.543401] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.556497] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.563698] Extcon HDMI: HPD enabled [ 7.567364] tegradc 15200000.display: hdmi: plugged [ 7.598585] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.600172] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.601709] usb 1-3: Product: Bluetooth Radio [ 7.603116] usb 1-3: Manufacturer: Realtek [ 7.604430] usb 1-3: SerialNumber: 00e04c000001 [ 7.608105] Root device found: mmcblk0p1 [ 7.611510] Found dev node: /dev/mmcblk0p1 [ 7.647820] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.653255] Rootfs mounted over mmcblk0p1 [ 7.697360] Switching from initrd to actual rootfs [ 7.839169] systemd[1]: System time before build time, advancing clock. [ 7.908740] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.913876] systemd[1]: Detected architecture arm64. [ 7.951831] systemd[1]: Set hostname to . [ 8.117854] systemd-sysv-generator[240]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.470388] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.472151] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.477856] systemd[1]: Created slice system-modprobe.slice. [ 8.482590] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.486686] systemd[1]: Created slice User and Session Slice. [ 8.490117] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.494304] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.497731] systemd[1]: Reached target User and Group Name Lookups. [ 8.500917] systemd[1]: Reached target Slices. [ 8.504149] systemd[1]: Reached target Swap. [ 8.508334] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.512065] systemd[1]: Listening on Syslog Socket. [ 8.515648] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.519077] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.523411] systemd[1]: Listening on Journal Audit Socket. [ 8.527019] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.530723] systemd[1]: Listening on Journal Socket. [ 8.534492] systemd[1]: Listening on udev Control Socket. [ 8.538009] systemd[1]: Listening on udev Kernel Socket. [ 8.546614] systemd[1]: Mounting Huge Pages File System... [ 8.555529] systemd[1]: Mounting POSIX Message Queue File System... [ 8.563782] systemd[1]: Mounting RPC Pipe File System... [ 8.572698] systemd[1]: Mounting Kernel Debug File System... [ 8.581174] systemd[1]: Mounting Kernel Trace File System... [ 8.594215] systemd[1]: Starting Journal Service... [ 8.603151] systemd[1]: Starting Set the console keyboard layout... [ 8.611303] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.614790] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.621188] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.628933] systemd[1]: Started Nameserver information manager. [ 8.633598] systemd[1]: Reached target Network (Pre). [ 8.640327] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.642306] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.650314] systemd[1]: Starting Load Kernel Modules... [ 8.658161] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.666283] systemd[1]: Starting udev Coldplug all Devices... [ 8.677585] systemd[1]: Mounted Huge Pages File System. [ 8.681122] systemd[1]: Mounted POSIX Message Queue File System. [ 8.684681] systemd[1]: Mounted RPC Pipe File System. [ 8.686019] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.690514] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.692022] systemd[1]: Mounted Kernel Debug File System. [ 8.692786] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.694986] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.695001] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.695004] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.695195] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.695431] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.695608] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.695616] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.709462] systemd[1]: Mounted Kernel Trace File System. [ 8.717656] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.724063] systemd[1]: nvfb-udev.service: Succeeded. [ 8.729081] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.741111] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.753477] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.755258] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.763333] systemd[1]: Starting Load/Save Random Seed... [ 8.771990] systemd[1]: Starting Create System Users... [ 8.780879] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.780879] [ 8.816769] systemd[1]: Finished Load/Save Random Seed. [ 8.823375] systemd[1]: Finished Load Kernel Modules. [ 8.828358] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.834950] systemd[1]: Mounting Kernel Configuration File System... [ 8.842752] systemd[1]: Started OP-TEE Client Supplicant. [ 8.852481] systemd[1]: Starting Apply Kernel Variables... [ 8.859506] systemd[1]: Mounted Kernel Configuration File System. [ 8.871020] systemd[1]: Finished Set the console keyboard layout. [ 8.877615] systemd[1]: Finished Create System Users. [ 10.233840] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.239052] imx219 9-0010: board setup failed [ 10.240445] imx219: probe of 9-0010 failed with error -121 [ 10.251496] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.256688] imx219 10-0010: board setup failed [ 10.267875] imx219: probe of 10-0010 failed with error -121 [ 10.438487] hot-surface-alert cooling state: 0 -> 1 [ 11.135743] using random self ethernet address [ 11.146351] using random host ethernet address [ 11.982667] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.984264] Creating 1 MTD partitions on "spi6.0": [ 11.985917] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.634499] using random self ethernet address [ 12.636090] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.844242] nvidia: loading out-of-tree module taints kernel. [ 59.835473] watchdog: watchdog0: watchdog did not stop! [ 60.350310] Trying to unregister non-registered hwtime source [ 63.411970] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.413600] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.339] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.340] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.341] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.344] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized noc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 202ÿâavfs_clk_platform_post initialized ÿä2 aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.207] I> NVDisp-Init version: t194-f9ecfedc [0003.207] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.208] I> 1) Base:0xc8300000 Size:0x00100000 [0003.208] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.211] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.220] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.229] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.238] I> 10) Base:0xca800000 Size:0x00800000 [0003.242] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.251] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.260] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.269] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.278] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.287] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.296] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.300] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.309] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.318] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.327] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.336] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.345] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.354] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.358] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.367] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.376] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.385] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.394] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.404] calling constructors [0003.407] initializing heap [0003.410] I> Heap: [0xa0960000 ... 0xadf00000] [0003.414] initializing threads [0003.417] initializing timers [0003.420] creating bootstrap completion thread [0003.424] top of bootstrap2() [0003.427] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.440] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.487] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.491] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.506] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.513] I> QSPI source rate = 204000 Khz [0003.516] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.529] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.548] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.561] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.567] E> Failed to publish 00000003 [0003.571] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.591] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> regulator 'vdd-hdmi-5v0' already enabled [0003.599] I> hdmi cable connected [0003.604] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.610] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.686] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.747] calling apps_init() [0003.748] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944fc98 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944fc98 to 0x000000025944fcd0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c1000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b1000000-0x00000000c1000000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000687] Console: colour dummy device 80x25 [ 0.002159] printk: console [tty0] enabled [ 0.002219] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002254] pid_max: default: 32768 minimum: 301 [ 0.002464] LSM: Security Framework initializing [ 0.002522] Yama: becoming mindful. [ 0.002563] SELinux: Initializing. [ 0.002738] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002776] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006127] rcu: Hierarchical SRCU implementation. [ 0.006371] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007048] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007096] DTB Build time: Aug 10 2022 20:31:49 [ 0.009787] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010040] Remapping and enabling EFI services. [ 0.012536] smp: Bringing up secondary CPUs ... [ 0.041775] Detected PIPT I-cache on CPU1 [ 0.041853] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071700] Detected PIPT I-cache on CPU2 [ 0.071775] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.101404] Detected PIPT I-cache on CPU3 [ 0.101572] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.131403] Detected PIPT I-cache on CPU4 [ 0.131505] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.161314] Detected PIPT I-cache on CPU5 [ 0.161383] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161715] smp: Brought up 1 node, 6 CPUs [ 0.162018] SMP: Total of 6 processors activated. [ 0.162056] CPU features: detected: Privileged Access Never [ 0.162079] CPU features: detected: LSE atomic instructions [ 0.162093] CPU features: detected: User Access Override [ 0.162107] CPU features: detected: 32-bit EL0 Support [ 0.162138] CPU features: detected: RAS Extension Support [ 0.162150] CPU features: detected: CRC32 instructions [ 0.162163] CPU features: detected: 32-bit EL1 Support [ 0.229636] CPU: All CPU(s) started at EL2 [ 0.234531] devtmpfs: initialized [ 0.284422] Registered cp15_barrier emulation handler [ 0.284523] Registered setend emulation handler [ 0.284544] KASLR enabled [ 0.284752] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.284777] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.286182] pinctrl core: initialized pinctrl subsystem [ 0.287301] SMBIOS 3.0.0 present. [ 0.287341] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288017] NET: Registered protocol family 16 [ 0.290061] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.290561] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291291] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291374] audit: initializing netlink subsys (disabled) [ 0.291644] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292001] thermal_sys: Registered thermal governor 'step_wise' [ 0.292008] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292022] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.294014] cpuidle: using governor menu [ 0.294357] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.294808] ASID allocator initialised with 32768 entries [ 0.295058] Serial: AMBA PL011 UART driver [ 0.298567] Tegra reboot handler registered. [ 0.361587] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.361769] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.362010] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.362059] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.362189] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.362231] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.362348] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.362391] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.362512] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.362582] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.364973] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.365007] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.365036] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.365062] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.365092] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.365119] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.365168] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.365222] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.365247] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.365286] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.365311] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.365335] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.365376] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.365399] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.365427] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.365453] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.365476] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.365566] mc-err: mcerr ops are set to t19x [ 0.376842] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.376866] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.376879] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.376890] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.383422] ACPI: Interpreter disabled. [ 0.384595] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.385819] iommu: Default domain type: Translated [ 0.385935] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.386331] SCSI subsystem initialized [ 0.386468] usbcore: registered new interface driver usbfs [ 0.386506] usbcore: registered new interface driver hub [ 0.386537] usbcore: registered new device driver usb [ 0.386945] mc: Linux media interface: v0.10 [ 0.386971] videodev: Linux video capture interface: v2.00 [ 0.387276] pps_core: LinuxPPS API ver. 1 registered [ 0.387289] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.387310] PTP clock support registered [ 0.387498] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.387783] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.387870] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.388422] Registered efivars operations [ 0.393972] FPGA manager framework [ 0.394076] Advanced Linux Sound Architecture Driver Initialized. [ 0.394675] Bluetooth: Core ver 2.22 [ 0.394713] NET: Registered protocol family 31 [ 0.394724] Bluetooth: HCI device and connection manager initialized [ 0.394741] Bluetooth: HCI socket layer initialized [ 0.394756] Bluetooth: L2CAP socket layer initialized [ 0.394777] Bluetooth: SCO socket layer initialized [ 0.396279] camchar: rtcpu character device driver loaded [ 0.396916] clocksource: Switched to clocksource arch_sys_counter [ 0.682338] VFS: Disk quotas dquot_6.6.0 [ 0.682428] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.682805] pnp: PnP ACPI: disabled [ 0.694496] la/ptsa driver initialized. [ 0.694630] NET: Registered protocol family 2 [ 0.694816] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.700242] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.700304] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.700621] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.701084] TCP: Hash tables configured (established 65536 bind 65536) [ 0.701210] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.701298] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.701524] NET: Registered protocol family 1 [ 0.702167] RPC: Registered named UNIX socket transport module. [ 0.702182] RPC: Registered udp transport module. [ 0.702191] RPC: Registered tcp transport module. [ 0.702200] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.702217] PCI: CLS 0 bytes, default 64 [ 0.702435] Trying to unpack rootfs image as initramfs... [ 0.877627] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.879830] Freeing initrd memory: 8196K [ 0.883717] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.883775] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.883833] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.884219] kvm [1]: IPA Size Limit: 40 bits [ 0.884748] kvm [1]: vgic interrupt IRQ9 [ 0.885347] kvm [1]: VHE mode initialized successfully [ 0.886587] Initialise system trusted keyrings [ 0.886836] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.890603] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.891221] NFS: Registering the id_resolver key type [ 0.891249] Key type id_resolver registered [ 0.891262] Key type id_legacy registered [ 0.891322] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.891364] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.891398] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.899127] NET: Registered protocol family 38 [ 0.899160] Key type asymmetric registered [ 0.899172] Asymmetric key parser 'x509' registered [ 0.899211] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.899591] io scheduler mq-deadline registered [ 0.899604] io scheduler kyber registered [ 0.903519] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.905614] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.905673] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.905726] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.905777] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.905828] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.909662] scrncapt: init (heads:4 wins:6 planes:4) [ 0.910147] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.910746] EINJ: ACPI disabled. [ 0.913059] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.913101] tegra-pmc: ### PMC reset source: MAINSWRST [ 0.913113] tegra-pmc: ### PMC reset level: L1 [ 0.913123] tegra-pmc: ### PMC reset status reg: 0x2d [ 0.913184] tegra-pmc: PMC Prod config success [ 0.917441] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.921702] random: fast init done [ 0.921774] printk: console [ttyTCU0] enabled [ 2.474507] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.478787] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.483500] arm-smmu 10000000.iommu: stage 1 translation [ 2.488767] arm-smmu 10000000.iommu: stage 2 translation [ 2.494531] arm-smmu 10000000.iommu: nested translation [ 2.499629] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.506774] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.517374] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.519866] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.526714] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.534904] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.539502] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.544477] arm-smmu 12000000.iommu: stage 1 translation [ 2.549981] arm-smmu 12000000.iommu: stage 2 translation [ 2.555408] arm-smmu 12000000.iommu: nested translation [ 2.560837] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.568013] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.578108] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.581141] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.587436] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.594903] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.604506] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.607862] tegra_profiler: auth: init [ 2.612080] THERMAL EST: found 3 subdevs [ 2.615790] THERMAL EST num_resources: 0 [ 2.619402] [THERMAL EST subdev 0] [ 2.622957] [THERMAL EST subdev 1] [ 2.626110] [THERMAL EST subdev 2] [ 2.629637] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.636049] THERMAL EST: thz register success. [ 2.640318] THERMAL EST: end of probe, return err: 0 [ 2.645418] nvsciipc: loaded module [ 2.652526] tun: Universal TUN/TAP device driver, 1.6 [ 2.655061] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.661395] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.666942] e1000e: Intel(R) PRO/1000 Network Driver [ 2.671622] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.677955] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.683250] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.689476] PPP generic driver version 2.4.2 [ 2.693402] PPP BSD Compression module registered [ 2.697971] PPP Deflate Compression module registered [ 2.703240] PPP MPPE Compression module registered [ 2.708488] usbcore: registered new interface driver r8152 [ 2.713736] usbcore: registered new interface driver asix [ 2.719331] usbcore: registered new interface driver ax88179_178a [ 2.725460] usbcore: registered new interface driver cdc_ether [ 2.731142] usbcore: registered new interface driver net1080 [ 2.736747] usbcore: registered new interface driver cdc_subset [ 2.743060] usbcore: registered new interface driver zaurus [ 2.748748] usbcore: registered new interface driver cdc_ncm [ 2.754158] usbcore: registered new interface driver aqc111 [ 2.760052] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.766126] ohci-pci: OHCI PCI platform driver [ 2.770177] ohci-platform: OHCI generic platform driver [ 2.776030] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.782621] usbcore: registered new interface driver uas [ 2.786738] usbcore: registered new interface driver usb-storage [ 2.792643] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.798916] mousedev: PS/2 mouse device common for all mice [ 2.803879] usbcore: registered new interface driver xpad [ 2.811642] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.814655] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.822474] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.829070] i2c /dev entries driver [ 2.832268] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.837916] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.843590] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.848622] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.854189] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.859460] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.864816] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.879003] device-mapper: uevent: version 1.0.3 [ 2.879452] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.885800] cpuidle: Initializing cpuidle driver [ 2.889175] sdhci: Secure Digital Host Controller Interface driver [ 2.893961] sdhci: Copyright(c) Pierre Ossman [ 2.898065] Synopsys Designware Multimedia Card Interface Driver [ 2.904520] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.910518] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.911366] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.923680] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.945210] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.954849] vdd-1v0: supplied by regulator-dummy [ 2.960395] vdd-1v8-hs: supplied by regulator-dummy [ 2.965410] vdd-1v8-ls: supplied by regulator-dummy [ 2.970367] vdd-1v8-ao: supplied by regulator-dummy [ 2.974418] vddio-ddr-1v1: supplied by regulator-dummy [ 2.979016] vdd-rtc: supplied by regulator-dummy [ 2.980763] spmic-ldo1: supplied by regulator-dummy [ 2.982095] vdd-ao-3v3: supplied by regulator-dummy [ 2.988364] vddio-emmc-3v3: supplied by regulator-dummy [ 2.994712] spmic-ldo4: supplied by regulator-dummy [ 2.996029] vdd-usb-3v3: supplied by regulator-dummy [ 3.002357] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.008591] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.014161] spmic-ldo8: supplied by vdd-1v8-ls [ 3.015688] gpio-510 (gpio_default): hogged as output/high [ 3.017039] gpio-511 (gpio_default): hogged as output/high [ 3.020018] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.156121] max77686-rtc max77620-rtc: registered as rtc0 [ 3.157226] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.157576] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.975076] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.976242] hid: raw HID events driver (C) Jiri Kosina [ 3.977119] usbcore: registered new interface driver usbhid [ 3.977271] usbhid: USB HID core driver [ 3.979408] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.980693] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.057154] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.131596] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.250 ms) ÿá[ 4.065232] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.065877] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.066887] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.067858] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.069848] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.070502] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.071175] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.072798] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.073201] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.076104] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.081624] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.088064] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.093518] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.098974] denver_knobs_init:MTS_VERSION:55637613 [ 4.112409] t19x_cache tegra-cache: probed [ 4.115458] optee: probing for conduit method. [ 4.116299] optee: revision 3.16 (65cc2218) [ 4.117385] optee: dynamic shared memory is enabled [ 4.120022] optee: initialized driver [ 4.127269] nvpmodel: initialized successfully [ 4.127875] tegra_hv: get_hvd: not initialized yet [ 4.132574] user_ivc_mempool: hypervisor not present [ 4.138296] usbcore: registered new interface driver snd-usb-audio [ 4.145010] u32 classifier [ 4.146279] input device check on [ 4.150085] Actions configured [ 4.153539] Initializing XFRM netlink socket [ 4.158300] NET: Registered protocol family 10 [ 4.165510] Segment Routing with IPv6 [ 4.165834] NET: Registered protocol family 17 [ 4.169949] NET: Registered protocol family 15 [ 4.174613] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.188057] Bluetooth: RFCOMM socket layer initialized [ 4.192829] Bluetooth: RFCOMM ver 1.11 [ 4.196731] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.202368] Bluetooth: HIDP socket layer initialized [ 4.208488] 9pnet: Installing 9P2000 support [ 4.212075] Key type dns_resolver registered [ 4.217467] registered taskstats version 1 [ 4.220209] Loading compiled-in X.509 certificates [ 4.233408] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.236222] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.246291] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.248124] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.257085] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.265131] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.381091] tegra194-pcie 14160000.pcie: Link up [ 4.383992] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.384287] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.384500] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.384824] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.385083] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.385481] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.385921] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.398630] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.399142] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.399689] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.401287] pci 0004:01:00.0: supports D1 D2 [ 4.401424] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.413398] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.413681] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.413938] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.414421] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.414684] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.414855] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.415618] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.423076] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.431816] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.442048] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.446449] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.452625] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.459397] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.467867] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.469533] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.478225] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.486442] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.601801] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.602293] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.602566] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.602738] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.603042] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.603257] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.603741] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.604180] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.629762] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.630146] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.632231] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.633964] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.635625] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.637977] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.639161] pci 0005:00:00.0: Removing from iommu group 7 [ 5.639478] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.675541] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.701686] host1x 13e10000.host1x: initialized [ 5.703748] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.704762] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.706309] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.707181] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.708401] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.709306] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.710412] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.711214] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.712284] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.713176] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.714054] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.718755] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.728806] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.735953] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.746029] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.752582] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.762998] falcon 15340000.vic: Adding to iommu group 17 [ 5.778332] falcon 15340000.vic: initialized [ 5.779410] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.785504] falcon 15380000.nvjpg: initialized [ 5.786395] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.795897] falcon 154c0000.nvenc: initialized [ 5.796551] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.805713] falcon 15a80000.nvenc1: initialized [ 5.806401] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.817914] nvdec 15480000.nvdec: initialized [ 5.818507] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.829199] nvdec 15140000.nvdec1: initialized [ 5.829860] tsec 15500000.tsec: Adding to iommu group 18 [ 5.836338] tsec 15500000.tsec: initialized [ 5.837033] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.843059] tsec 15100000.tsecb: initialized [ 5.847216] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.875685] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.888246] gpio-374 (wifi-enable): hogged as output/high [ 5.888559] gpio-431 (camera-control-output-low): hogged as output/low [ 5.889121] gpio-432 (camera-control-output-low): hogged as output/low [ 5.890881] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.892711] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.893418] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.895017] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.899293] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.905070] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.910772] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.919727] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.926788] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.938925] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.943134] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.949217] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.957936] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.967191] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.974750] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.981840] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.988428] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.998057] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.003975] pva 16000000.pva0: Adding to iommu group 22 [ 6.032651] pva 16000000.pva0: initialized [ 6.037938] pva 16800000.pva1: Adding to iommu group 23 [ 6.050109] pva 16800000.pva1: initialized [ 6.055841] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.069545] nvdla 15880000.nvdla0: initialized [ 6.071320] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.081108] nvdla 158c0000.nvdla1: initialized [ 6.083943] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.084361] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.084695] tegradccommon 15200000.display-hub: dma mapping done [ 6.087391] tegradc 15200000.display: Adding to iommu group 26 [ 6.098218] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.098659] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.099579] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.100474] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.100484] tegradc 15210000.display: Adding to iommu group 26 [ 6.101438] generic_infoframe_type: 0x87 [ 6.102072] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.103761] tegradc 15200000.display: DT parsed successfully [ 6.109467] tegra_cec 3960000.tegra_cec: probed [ 6.115184] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.121461] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.129534] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.136058] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.142347] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.150047] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.151262] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.158817] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.164082] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.165427] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.170770] kfuse 3830000.kfuse: initialized [ 6.179810] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.184291] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.194112] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.197845] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.206471] tegradc 15210000.display: disp0 connected to head1->sor [ 6.212414] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.218307] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.237088] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.244669] tegradc 15210000.display: DT parsed successfully [ 6.255327] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.258757] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.273762] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.282620] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.287922] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.307750] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.308134] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.311053] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.319820] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.328193] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.334689] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.342144] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.349336] usb usb1: Product: xHCI Host Controller [ 6.354568] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.360824] usb usb1: SerialNumber: 3610000.xhci [ 6.366575] hub 1-0:1.0: USB hub found [ 6.369419] hub 1-0:1.0: 4 ports detected [ 6.374175] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.378796] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.386143] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.393948] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.401999] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.409269] usb usb2: Product: xHCI Host Controller [ 6.413964] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.420154] usb usb2: SerialNumber: 3610000.xhci [ 6.425715] hub 2-0:1.0: USB hub found [ 6.428625] hub 2-0:1.0: 4 ports detected [ 6.443786] random: crng init done [ 6.470950] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.476869] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.478511] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.478689] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.491982] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.493070] tegra194-cpufreq ccplex: probed with BWMGR [ 6.494329] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.494888] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.495324] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.496532] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.505679] mmc0: CQHCI version 5.10 [ 6.508597] tegra194-vi5 15c10000.vi: initialized [ 6.511298] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.512517] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.515936] generic_infoframe_type: 0x87 [ 6.522623] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.526088] tegradc 15200000.display: DT parsed successfully [ 6.534168] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.534177] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.539739] tegradc 15200000.display: Display dc.00000000c9f9c185 registered with id=0 [ 6.546557] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.554077] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.561094] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.567309] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.567399] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.567403] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.567811] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.580991] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.582127] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.589817] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.598706] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.606090] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.607685] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.613328] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.624976] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.635393] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.641937] ************************************** [ 6.641940] CPU:0, Error:cbb-noc [ 6.641943] Error Logger : 0 [ 6.641953] ErrLog0 : 0x80030000 [ 6.641955] Transaction Type : RD - Read, Incrementing [ 6.641958] Error Code : SLV [ 6.641982] Error Source : Target [ 6.649212] nvethernet 2490000.ethernet: Macsec not supported [ 6.656548] Error Description : Target error detected by CBB slave [ 6.656559] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.656564] Packet header Lock : 0 [ 6.656572] Packet header Len1 : 3 [ 6.730919] NOC protocol version : version >= 2.7 [ 6.735905] ErrLog1 : 0x352422 [ 6.738977] ErrLog2 : 0x0 [ 6.742117] RouteId : 0x352422 [ 6.745530] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.750343] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.754809] TargSubRange : 18 [ 6.758065] SeqId : 0 [ 6.761193] ErrLog3 : 0x4045c [ 6.764606] ErrLog4 : 0x0 [ 6.767319] Address accessed : 0x15b4045c [ 6.771536] ErrLog5 : 0x889f851 [ 6.775192] Non-Modify : 0x1 [ 6.778606] AXI ID : 0x11 [ 6.781755] Master ID : CCPLEX [ 6.784823] Security Group(GRPSEC): 0x7e [ 6.789022] Cache : 0x1 -- Bufferable [ 6.793481] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.800305] FALCONSEC : 0x0 [ 6.803198] Virtual Queuing Channel(VQC): 0x0 [ 6.808093] ************************************** [ 6.812873] ------------[ cut here ]------------ [ 6.817373] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.824194] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.829445] Modules linked in: [ 6.832430] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 6.839068] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.851327] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.857106] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 6.862083] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 6.866547] sp : ffff800010003de0 [ 6.870224] x29: ffff800010003de0 x28: 0000000000000001 [ 6.875645] x27: 0000000000000005 x26: ffffdea1d66e3f58 [ 6.880810] x25: ffffdea1d703ce10 x24: 0000000000000001 [ 6.886492] x23: ffffdea1d69d7000 x22: ffffdea1d6e5ea00 [ 6.891572] x21: 000000000000000f x20: ffff192d00e65e80 [ 6.897343] x19: ffffdea1d6e5ea00 x18: 0000000000000010 [ 6.902767] x17: 0000000000004000 x16: 00000000c1b1dc3f [ 6.908105] x15: ffffdea1d6cd2bf0 x14: 0720072007200720 [ 6.913620] x13: 0720072007200720 x12: 0720072007200720 [ 6.919130] x11: 0720072007200720 x10: 0720072007200720 [ 6.924385] x9 : 0720072007200720 x8 : 07200720072a072a [ 6.929898] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 6.935669] x5 : 0000000000057fa8 x4 : ffffdea1d6ce7968 [ 6.941092] x3 : 00000000ffffffff x2 : ffffdea1d517e090 [ 6.946430] x1 : ffffdea1d6cd2680 x0 : 0000000000010001 [ 6.951767] Call trace: [ 6.953978] tegra194_cbb_err_isr+0x190/0x1b0 [ 6.958512] __handle_irq_event_percpu+0x68/0x2a0 [ 6.962976] handle_irq_event_percpu+0x40/0xa0 [ 6.967535] handle_irq_event+0x50/0xf0 [ 6.971283] handle_fasteoi_irq+0xc0/0x170 [ 6.975051] generic_handle_irq+0x40/0x60 [ 6.979075] __handle_domain_irq+0x70/0xd0 [ 6.983533] efi_header_end+0xb0/0xf0 [ 6.987047] el1_irq+0xd0/0x180 [ 6.990009] cpuidle_enter_state+0xb8/0x410 [ 6.994208] cpuidle_enter+0x40/0x60 [ 6.997708] call_cpuidle+0x44/0x80 [ 7.001207] do_idle+0x208/0x270 [ 7.004362] cpu_startup_entry+0x30/0x70 [ 7.008383] rest_init+0xdc/0xe8 [ 7.011366] arch_call_rest_init+0x18/0x20 [ 7.015562] start_kernel+0x514/0x54c [ 7.018911] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.025364] ---[ end trace 7bde0f20ebbe408d ]--- [ 7.030082] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.037364] SMP: stopping secondary CPUs [ 7.041217] Kernel Offset: 0x5ea1c4fc0000 from 0xffff800010000000 [ 7.047579] PHYS_OFFSET: 0xffffe6d400000000 [ 7.051439] CPU features: 0x8240002,03802a30 [ 7.056155] Memory Limit: none [ 7.059311] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 65500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.305] I> sdmmc DDR50 mode [0001.323] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.340] W> Cannot find any partition table for 00000003 [0001.341] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.358] I> Active Boot chain : 0 [0002.029] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.481] I> register 'maxim' power off handle [0003.483] I> virtual i2c enabled [0003.483] I> registered 'maxim,max20024' pmic [0003.484] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.486] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.569] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.604] I> hdmi cable connected [0003.610] W> set volts not configured for 'vdd-1v0' [0003.615] W> set volts not configured for 'vdd-1v8-hs' [0003.616] I> retrieved tmds range from prod_list_hdmi_soc [0003.622] E> invalid display type [0003.623] E> cannot find any other nvdisp nodes [0003.639] I> edid read success [0003.651] I> edid read success [0003.652] I> width = 640, height = 480, frequency = 25174825 [0003.652] I> width = 1920, height = 1080, frequency = 148500000 [0003.652] I> width = 1280, height = 768, frequency = 79500000 [0003.653] I> width = 1360, height = 768, frequency = 85500000 [0003.653] I> width = 720, height = 480, frequency = 26973026 [0003.657] I> width = 720, height = 576, frequency = 26973026 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.686] I> width = 720, height = 480, frequency = 26973026 [0003.691] I> width = 720, height = 576, frequency = 26973026 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 4096, height = 2160, frequency = 296703296 [0003.725] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.737] I> hdmi_enable, starting HDMI initialisation [0003.742] I> hdmi_enable, HDMI initialisation complete [0003.751] initializing target [0003.751] calling apps_init() [0003.752] starting app kernel_boot_app [0003.753] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000890] Console: colour dummy device 80x25 [ 0.002424] printk: console [tty0] enabled [ 0.002485] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002550] pid_max: default: 32768 minimum: 301 [ 0.002745] LSM: Security Framework initializing [ 0.002809] Yama: becoming mindful. [ 0.002855] SELinux: Initializing. [ 0.003055] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003093] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006187] rcu: Hierarchical SRCU implementation. [ 0.006423] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007440] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007504] DTB Build time: Aug 10 2022 20:31:49 [ 0.012179] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.012541] Remapping and enabling EFI services. [ 0.014627] smp: Bringing up secondary CPUs ... [ 0.043765] Detected PIPT I-cache on CPU1 [ 0.043866] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.076403] Detected PIPT I-cache on CPU2 [ 0.076554] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.106223] Detected PIPT I-cache on CPU3 [ 0.106363] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.136137] Detected PIPT I-cache on CPU4 [ 0.136261] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.166121] Detected PIPT I-cache on CPU5 [ 0.166265] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166591] smp: Brought up 1 node, 6 CPUs [ 0.166802] SMP: Total of 6 processors activated. [ 0.166853] CPU features: detected: Privileged Access Never [ 0.166875] CPU features: detected: LSE atomic instructions [ 0.166889] CPU features: detected: User Access Override [ 0.166902] CPU features: detected: 32-bit EL0 Support [ 0.166915] CPU features: detected: RAS Extension Support [ 0.166928] CPU features: detected: CRC32 instructions [ 0.166942] CPU features: detected: 32-bit EL1 Support [ 0.237911] CPU: All CPU(s) started at EL2 [ 0.244852] devtmpfs: initialized [ 0.296571] Registered cp15_barrier emulation handler [ 0.296704] Registered setend emulation handler [ 0.296727] KASLR enabled [ 0.296988] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.297012] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.298402] pinctrl core: initialized pinctrl subsystem [ 0.299384] SMBIOS 3.0.0 present. [ 0.299417] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.300075] NET: Registered protocol family 16 [ 0.302169] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.302697] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.303394] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.303452] audit: initializing netlink subsys (disabled) [ 0.303734] audit: type=2000 audit(0.300:1): state=initialized audit_enabled=0 res=1 [ 0.304164] thermal_sys: Registered thermal governor 'step_wise' [ 0.304171] thermal_sys: Registered thermal governor 'power_allocator' [ 0.304186] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.306493] cpuidle: using governor menu [ 0.307039] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.307492] ASID allocator initialised with 32768 entries [ 0.307716] Serial: AMBA PL011 UART driver [ 0.311211] Tegra reboot handler registered. [ 0.383370] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.383498] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.383690] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.383732] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.383847] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.383887] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.383992] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.384034] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.384210] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.384253] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.387012] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.387072] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.387107] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.387147] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.387179] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.387204] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.387245] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.387270] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.387294] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.387318] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.387342] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.387366] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.387390] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.387413] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.387437] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.387461] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.387484] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.387593] mc-err: mcerr ops are set to t19x [ 0.400654] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.400675] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.400687] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.400699] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.408031] ACPI: Interpreter disabled. [ 0.409186] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.410483] iommu: Default domain type: Translated [ 0.410549] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.410945] SCSI subsystem initialized [ 0.411124] usbcore: registered new interface driver usbfs [ 0.411168] usbcore: registered new interface driver hub [ 0.411203] usbcore: registered new device driver usb [ 0.411693] mc: Linux media interface: v0.10 [ 0.411725] videodev: Linux video capture interface: v2.00 [ 0.412179] pps_core: LinuxPPS API ver. 1 registered [ 0.412193] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.412215] PTP clock support registered [ 0.412511] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.412876] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.412961] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.413660] Registered efivars operations [ 0.418980] FPGA manager framework [ 0.419082] Advanced Linux Sound Architecture Driver Initialized. [ 0.419678] Bluetooth: Core ver 2.22 [ 0.419714] NET: Registered protocol family 31 [ 0.419725] Bluetooth: HCI device and connection manager initialized [ 0.419742] Bluetooth: HCI socket layer initialized [ 0.419757] Bluetooth: L2CAP socket layer initialized [ 0.419778] Bluetooth: SCO socket layer initialized [ 0.421371] camchar: rtcpu character device driver loaded [ 0.422292] clocksource: Switched to clocksource arch_sys_counter [ 0.727737] VFS: Disk quotas dquot_6.6.0 [ 0.727812] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.728160] pnp: PnP ACPI: disabled [ 0.740264] la/ptsa driver initialized. [ 0.740410] NET: Registered protocol family 2 [ 0.740604] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.745774] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.745891] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.746137] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.746592] TCP: Hash tables configured (established 65536 bind 65536) [ 0.746716] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.746828] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.747020] NET: Registered protocol family 1 [ 0.747576] RPC: Registered named UNIX socket transport module. [ 0.747592] RPC: Registered udp transport module. [ 0.747600] RPC: Registered tcp transport module. [ 0.747625] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.747640] PCI: CLS 0 bytes, default 64 [ 0.747855] Trying to unpack rootfs image as initramfs... [ 0.936715] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.938998] Freeing initrd memory: 8196K [ 0.944092] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.944135] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.944200] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.944790] kvm [1]: IPA Size Limit: 40 bits [ 0.945481] kvm [1]: vgic interrupt IRQ9 [ 0.945982] kvm [1]: VHE mode initialized successfully [ 0.947436] Initialise system trusted keyrings [ 0.947690] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.953046] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.953757] NFS: Registering the id_resolver key type [ 0.953783] Key type id_resolver registered [ 0.953792] Key type id_legacy registered [ 0.953861] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.953878] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.953906] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.962638] NET: Registered protocol family 38 [ 0.962658] Key type asymmetric registered [ 0.962668] Asymmetric key parser 'x509' registered [ 0.962714] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.962967] io scheduler mq-deadline registered [ 0.963002] io scheduler kyber registered [ 0.968081] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.970594] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.970670] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.970740] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.970806] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.970855] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.976444] scrncapt: init (heads:4 wins:6 planes:4) [ 0.976851] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.977625] EINJ: ACPI disabled. [ 0.981033] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.981054] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 0.981063] tegra-pmc: ### PMC reset level: L1 [ 0.981072] tegra-pmc: ### PMC reset status reg: 0x9 [ 0.981131] tegra-pmc: PMC Prod config success [ 0.986253] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.991967] random: fast init done [ 1.002961] printk: console [ttyTCU0] enabled [ 2.543486] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.547929] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.552507] arm-smmu 10000000.iommu: stage 1 translation [ 2.558072] arm-smmu 10000000.iommu: stage 2 translation [ 2.563280] arm-smmu 10000000.iommu: nested translation [ 2.568589] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.575755] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.587237] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.589108] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.595956] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.603778] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.608991] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.613739] arm-smmu 12000000.iommu: stage 1 translation [ 2.618981] arm-smmu 12000000.iommu: stage 2 translation [ 2.624653] arm-smmu 12000000.iommu: nested translation [ 2.629818] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.637254] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.648251] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.650096] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.656938] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.664129] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.674076] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.677348] tegra_profiler: auth: init [ 2.681631] THERMAL EST: found 3 subdevs [ 2.684780] THERMAL EST num_resources: 0 [ 2.688618] [THERMAL EST subdev 0] [ 2.692202] [THERMAL EST subdev 1] [ 2.695361] [THERMAL EST subdev 2] [ 2.698854] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.705081] THERMAL EST: thz register success. [ 2.709301] THERMAL EST: end of probe, return err: 0 [ 2.714962] nvsciipc: loaded module [ 2.721894] tun: Universal TUN/TAP device driver, 1.6 [ 2.724237] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.730376] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.736173] e1000e: Intel(R) PRO/1000 Network Driver [ 2.740864] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.747194] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.752229] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.758475] PPP generic driver version 2.4.2 [ 2.762956] PPP BSD Compression module registered [ 2.767207] PPP Deflate Compression module registered [ 2.772711] PPP MPPE Compression module registered [ 2.777464] usbcore: registered new interface driver r8152 [ 2.783226] usbcore: registered new interface driver asix [ 2.788565] usbcore: registered new interface driver ax88179_178a [ 2.794716] usbcore: registered new interface driver cdc_ether [ 2.800390] usbcore: registered new interface driver net1080 [ 2.805979] usbcore: registered new interface driver cdc_subset [ 2.812021] usbcore: registered new interface driver zaurus [ 2.817718] usbcore: registered new interface driver cdc_ncm [ 2.823432] usbcore: registered new interface driver aqc111 [ 2.829289] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.835112] ohci-pci: OHCI PCI platform driver [ 2.839695] ohci-platform: OHCI generic platform driver [ 2.845658] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.851836] usbcore: registered new interface driver uas [ 2.855991] usbcore: registered new interface driver usb-storage [ 2.861889] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.868195] mousedev: PS/2 mouse device common for all mice [ 2.872862] usbcore: registered new interface driver xpad [ 2.881172] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.883885] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 2.891650] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.898244] i2c /dev entries driver [ 2.901567] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.907044] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.912563] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.918309] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.923174] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.928680] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.934085] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.948025] device-mapper: uevent: version 1.0.3 [ 2.948485] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.955197] cpuidle: Initializing cpuidle driver [ 2.958752] sdhci: Secure Digital Host Controller Interface driver [ 2.963223] sdhci: Copyright(c) Pierre Ossman [ 2.967312] Synopsys Designware Multimedia Card Interface Driver [ 2.973485] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.979713] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.980274] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.992602] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.010981] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.019533] vdd-1v0: supplied by regulator-dummy [ 3.024933] vdd-1v8-hs: supplied by regulator-dummy [ 3.029611] vdd-1v8-ls: supplied by regulator-dummy [ 3.034304] vdd-1v8-ao: supplied by regulator-dummy [ 3.038094] vddio-ddr-1v1: supplied by regulator-dummy [ 3.042373] vdd-rtc: supplied by regulator-dummy [ 3.044056] spmic-ldo1: supplied by regulator-dummy [ 3.045251] vdd-ao-3v3: supplied by regulator-dummy [ 3.051303] vddio-emmc-3v3: supplied by regulator-dummy [ 3.057503] spmic-ldo4: supplied by regulator-dummy [ 3.058657] vdd-usb-3v3: supplied by regulator-dummy [ 3.064696] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.070754] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.076082] spmic-ldo8: supplied by vdd-1v8-ls [ 3.077437] gpio-510 (gpio_default): hogged as output/high [ 3.079741] gpio-511 (gpio_default): hogged as output/high [ 3.086556] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.225159] max77686-rtc max77620-rtc: registered as rtc0 [ 3.226381] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.226700] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.920271] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.921232] hid: raw HID events driver (C) Jiri Kosina [ 3.921896] usbcore: registered new interface driver usbhid [ 3.922042] usbhid: USB HID core driver [ 3.923788] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.924868] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.018578] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.094361] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.593 ms) ÿá[ 4.010558] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.011142] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.012203] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.012872] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.014874] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.015554] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.016124] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.017445] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.017786] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.019858] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.026621] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.033324] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.038506] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.044295] denver_knobs_init:MTS_VERSION:55637613 [ 4.056629] t19x_cache tegra-cache: probed [ 4.058847] optee: probing for conduit method. [ 4.059663] optee: revision 3.16 (65cc2218) [ 4.060513] optee: dynamic shared memory is enabled [ 4.065177] optee: initialized driver [ 4.071788] nvpmodel: initialized successfully [ 4.072758] tegra_hv: get_hvd: not initialized yet [ 4.077462] user_ivc_mempool: hypervisor not present [ 4.083620] usbcore: registered new interface driver snd-usb-audio [ 4.090130] u32 classifier [ 4.091627] input device check on [ 4.095163] Actions configured [ 4.098543] Initializing XFRM netlink socket [ 4.103225] NET: Registered protocol family 10 [ 4.109521] Segment Routing with IPv6 [ 4.111230] NET: Registered protocol family 17 [ 4.115364] NET: Registered protocol family 15 [ 4.119515] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.133124] Bluetooth: RFCOMM socket layer initialized [ 4.137759] Bluetooth: RFCOMM ver 1.11 [ 4.141913] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.147570] Bluetooth: HIDP socket layer initialized [ 4.153292] 9pnet: Installing 9P2000 support [ 4.157019] Key type dns_resolver registered [ 4.162599] registered taskstats version 1 [ 4.165329] Loading compiled-in X.509 certificates [ 4.178130] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.181442] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.191317] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.193553] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.201872] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.210573] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.326313] tegra194-pcie 14160000.pcie: Link up [ 4.328953] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.329197] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.329354] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.329647] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.329851] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.330252] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.330790] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.340812] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.341353] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.341838] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.343485] pci 0004:01:00.0: supports D1 D2 [ 4.343695] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.352461] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.352887] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.353205] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.353664] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.353991] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.355125] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.361305] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.368540] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.376871] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.387487] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.391956] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.397418] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.404135] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.412879] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.414797] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.423192] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.431926] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.534459] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.535037] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.535247] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.535436] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.535689] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.535921] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.536348] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.536750] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.550627] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.550944] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.552812] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.554207] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.555742] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.557237] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.558109] pci 0005:00:00.0: Removing from iommu group 7 [ 5.558578] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.589386] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.609550] host1x 13e10000.host1x: initialized [ 5.611218] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.612170] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.613095] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.613755] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.614690] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.615328] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.616148] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.617629] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.627752] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.634531] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.644491] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.651543] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.661334] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.668439] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.678741] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.685442] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.695344] falcon 15340000.vic: Adding to iommu group 17 [ 5.710494] falcon 15340000.vic: initialized [ 5.711356] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.716693] falcon 15380000.nvjpg: initialized [ 5.717194] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.727648] falcon 154c0000.nvenc: initialized [ 5.728181] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.737646] falcon 15a80000.nvenc1: initialized [ 5.738191] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.750040] nvdec 15480000.nvdec: initialized [ 5.750749] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.760710] nvdec 15140000.nvdec1: initialized [ 5.761320] tsec 15500000.tsec: Adding to iommu group 18 [ 5.766784] tsec 15500000.tsec: initialized [ 5.767259] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.775289] tsec 15100000.tsecb: initialized [ 5.779016] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.804866] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.816433] gpio-374 (wifi-enable): hogged as output/high [ 5.816805] gpio-431 (camera-control-output-low): hogged as output/low [ 5.817119] gpio-432 (camera-control-output-low): hogged as output/low [ 5.818844] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.820586] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.821146] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.826698] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.832161] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.838076] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.843285] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.851520] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.859160] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.870614] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.875645] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.881443] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.890601] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.899552] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.906827] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.914656] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.920604] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.930208] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.936541] pva 16000000.pva0: Adding to iommu group 22 [ 5.963014] pva 16000000.pva0: initialized [ 5.968139] pva 16800000.pva1: Adding to iommu group 23 [ 5.979222] pva 16800000.pva1: initialized [ 5.983181] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.994906] nvdla 15880000.nvdla0: initialized [ 5.996050] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.012351] nvdla 158c0000.nvdla1: initialized [ 6.016117] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.016409] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.016776] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.017150] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.017229] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.017591] tegradc 15200000.display: Adding to iommu group 26 [ 6.017606] tegradccommon 15200000.display-hub: dma mapping done [ 6.017633] tegradc 15210000.display: Adding to iommu group 26 [ 6.019588] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.024559] tegradc 15210000.display: disp0 connected to head1->sor [ 6.026516] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.032061] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.038013] tegra_cec 3960000.tegra_cec: probed [ 6.038714] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.044144] tegradc 15210000.display: DT parsed successfully [ 6.053268] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.056047] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.056903] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.061819] kfuse 3830000.kfuse: initialized [ 6.067981] generic_infoframe_type: 0x87 [ 6.074587] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.081838] tegradc 15200000.display: DT parsed successfully [ 6.088502] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.092724] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.097564] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.129810] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.130482] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.137767] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.137777] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.147884] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.168861] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.169262] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.174785] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.184287] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.196196] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.196679] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.217244] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.222725] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.226358] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.239134] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.244700] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.252693] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.261443] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.267854] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.275681] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.282906] usb usb1: Product: xHCI Host Controller [ 6.287589] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.293867] usb usb1: SerialNumber: 3610000.xhci [ 6.299320] hub 1-0:1.0: USB hub found [ 6.302714] hub 1-0:1.0: 4 ports detected [ 6.307166] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.311728] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.319634] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.326987] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.335172] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.342481] usb usb2: Product: xHCI Host Controller [ 6.347180] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.353608] usb usb2: SerialNumber: 3610000.xhci [ 6.359040] hub 2-0:1.0: USB hub found [ 6.362126] hub 2-0:1.0: 4 ports detected [ 6.402819] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.408642] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.409951] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.410201] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.423829] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.424914] tegra194-cpufreq ccplex: probed with BWMGR [ 6.426233] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.426965] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.427468] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.428712] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.437136] tegra194-vi5 15c10000.vi: initialized [ 6.437938] mmc0: CQHCI version 5.10 [ 6.438364] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.439823] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.445683] generic_infoframe_type: 0x87 [ 6.452166] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.456133] tegradc 15200000.display: DT parsed successfully [ 6.463958] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.468717] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.469527] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.476270] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.476276] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.476280] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.482333] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.484768] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.491946] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.498496] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.498505] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.505318] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.512165] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.519305] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.526418] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.526640] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.542241] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.555050] mmc0: Command Queue Engine enabled [ 6.555055] mmc0: periodic cache flush enabled [ 6.555069] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.555567] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.555731] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.556435] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.559528] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.562540] nvethernet 2490000.ethernet: Macsec not supported [ 6.563860] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.570311] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.572445] tegradc 15200000.display: probed [ 6.577732] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.668287] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.668458] Console: switching to colour frame buffer device 240x67 [ 6.668494] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.669860] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.675432] tegradc 15200000.display: fb registered [ 6.675500] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.683151] tegra-se-nvhost 15810000.se: initialized [ 6.688944] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.699549] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.705404] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.710512] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.735177] tegra-se-nvhost 15820000.se: initialized [ 6.741435] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.746152] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.752415] tegra-se-nvhost 15830000.se: initialized [ 6.758012] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.763472] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.769267] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.769856] tegra-se-nvhost 15840000.se: initialized [ 6.777290] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.777297] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.777305] usb 1-2: Manufacturer: Generic [ 6.777818] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.783203] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.784038] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.785657] tegra_actmon d230000.actmon: in actmon_register()... [ 6.789773] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.794511] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.807402] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.815979] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.816074] hub 1-2:1.0: USB hub found [ 6.821010] hub 1-2:1.0: 4 ports detected [ 6.821579] hvc_sysfs: hypervisor is not present [ 6.827286] Extcon AUX1(HDMI) enable [ 6.872003] tegradc 15210000.display: disp1 connected to head1->sor [ 6.878121] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.879258] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.885368] tegradc 15210000.display: DT parsed successfully [ 6.898600] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.910838] ALSA device list: [ 6.910955] No soundcards found. [ 6.911274] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.919296] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.926095] tegradc 15210000.display: probed [ 6.927496] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.937644] tegradc 15210000.display: fb registered [ 6.937652] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.937664] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.954710] usb 2-3: Manufacturer: Generic [ 6.962342] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.965172] Freeing unused kernel memory: 3968K [ 6.966356] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.966371] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.969949] hub 2-3:1.0: USB hub found [ 6.971851] hub 2-3:1.0: 4 ports detected [ 6.984348] Run /init as init process [ 6.995524] tegradc 15210000.display: blank - powerdown [ 7.000782] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.000786] Extcon DP: HPD disabled [ 7.000789] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.000799] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.000813] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.032129] tegradc 15200000.display: blank - powerdown [ 7.042373] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.054319] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.058331] Root device found: mmcblk0p1 [ 7.060343] Found dev node: /dev/mmcblk0p1 [ 7.078349] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.078353] Extcon AUX1(HDMI) disable [ 7.094677] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.098464] Rootfs mounted over mmcblk0p1 [ 7.101906] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.102900] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.106916] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.106924] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.116684] tegradc 15200000.display: unblank [ 7.117892] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.118103] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.123958] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.125844] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.130778] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.130782] Extcon AUX1(HDMI) enable [ 7.134728] Switching from initrd to actual rootfs [ 7.142601] tegradc 15200000.display: sync windows ret = 247 [ 7.180894] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.188223] Extcon HDMI: HPD enabled [ 7.191927] tegradc 15200000.display: hdmi: plugged [ 7.215568] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.216974] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.218389] usb 1-3: Product: Bluetooth Radio [ 7.219674] usb 1-3: Manufacturer: Realtek [ 7.220955] usb 1-3: SerialNumber: 00e04c000001 [ 7.276530] systemd[1]: System time before build time, advancing clock. [ 7.347558] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.352305] systemd[1]: Detected architecture arm64. [ 7.393626] systemd[1]: Set hostname to . [ 7.554918] systemd-sysv-generator[243]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 7.810966] random: crng init done [ 7.909717] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 7.911445] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 7.916881] systemd[1]: Created slice system-modprobe.slice. [ 7.921419] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.925585] systemd[1]: Created slice User and Session Slice. [ 7.929175] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.933223] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.936636] systemd[1]: Reached target User and Group Name Lookups. [ 7.939715] systemd[1]: Reached target Slices. [ 7.942679] systemd[1]: Reached target Swap. [ 7.946534] systemd[1]: Listening on RPCbind Server Activation Socket. [ 7.950062] systemd[1]: Listening on Syslog Socket. [ 7.953460] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.956781] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.960831] systemd[1]: Listening on Journal Audit Socket. [ 7.965607] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.969215] systemd[1]: Listening on Journal Socket. [ 7.974196] systemd[1]: Listening on udev Control Socket. [ 7.977538] systemd[1]: Listening on udev Kernel Socket. [ 7.985627] systemd[1]: Mounting Huge Pages File System... [ 7.993836] systemd[1]: Mounting POSIX Message Queue File System... [ 8.001852] systemd[1]: Mounting RPC Pipe File System... [ 8.010241] systemd[1]: Mounting Kernel Debug File System... [ 8.018776] systemd[1]: Mounting Kernel Trace File System... [ 8.028264] systemd[1]: Starting Journal Service... [ 8.036985] systemd[1]: Starting Set the console keyboard layout... [ 8.045048] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.048430] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.054746] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.062685] systemd[1]: Started Nameserver information manager. [ 8.067067] systemd[1]: Reached target Network (Pre). [ 8.072972] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.074996] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.082553] systemd[1]: Starting Load Kernel Modules... [ 8.090231] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.099978] systemd[1]: Starting udev Coldplug all Devices... [ 8.110031] systemd[1]: Mounted Huge Pages File System. [ 8.114209] systemd[1]: Mounted POSIX Message Queue File System. [ 8.117792] systemd[1]: Mounted RPC Pipe File System. [ 8.122579] systemd[1]: Mounted Kernel Debug File System. [ 8.123462] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.125879] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.125885] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.125895] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.125899] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.126644] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.127337] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.127566] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.127697] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.127704] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.149734] systemd[1]: Mounted Kernel Trace File System. [ 8.156884] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.164526] systemd[1]: nvfb-udev.service: Succeeded. [ 8.168325] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.180331] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.193360] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.195068] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.201223] systemd[1]: Starting Load/Save Random Seed... [ 8.210050] systemd[1]: Starting Create System Users... [ 8.234642] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.234642] [ 8.264795] systemd[1]: Finished Load/Save Random Seed. [ 8.274503] systemd[1]: Finished Load Kernel Modules. [ 8.279440] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.285914] systemd[1]: Mounting Kernel Configuration File System... [ 8.293598] systemd[1]: Started OP-TEE Client Supplicant. [ 8.302833] systemd[1]: Starting Apply Kernel Variables... [ 8.313499] systemd[1]: Finished Set the console keyboard layout. [ 8.317608] systemd[1]: Mounted Kernel Configuration File System. [ 8.329467] systemd[1]: Finished Create System Users. [ 8.338019] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.703680] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.710335] imx219 9-0010: board setup failed [ 9.711627] imx219: probe of 9-0010 failed with error -121 [ 9.724217] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.730580] imx219 10-0010: board setup failed [ 9.731777] imx219: probe of 10-0010 failed with error -121 [ 9.813671] hot-surface-alert cooling state: 0 -> 1 [ 10.637284] using random self ethernet address [ 10.680651] using random host ethernet address [ 11.127537] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.129182] Creating 1 MTD partitions on "spi6.0": [ 11.130789] 0x000000000000-0x000002000000 : "Whole_flash0" [ 11.943669] using random self ethernet address [ 11.945262] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.793310] nvidia: loading out-of-tree module taints kernel. [ 59.084378] watchdog: watchdog0: watchdog did not stop! [ 59.603265] Trying to unregister non-registered hwtime source [ 62.664361] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.665929] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 65000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.308] I> sdmmc DDR50 mode [0001.326] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.343] W> Cannot find any partition table for 00000003 [0001.344] > PARTITION_MANAGER: Failed to publish partition. [0001.360] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.361] I> Active Boot chain : 0 [0002.032] I> Relocating BR-BCT [0002.033] > DEVICE_PROD: device prod is not initialized. [0002.338] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.339] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.340] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.340] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.341] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.341] I> dram_block larger than 80000000 [0002.343] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.355] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.358] I> found decompressor handler: lz4 [0002.588] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.590] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized noc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.209] I> Welcome to NVDisp-Init [0003.209] I> NVDisp-Init version: t194-f9ecfedc [0003.210] I> CPU-BL Params @ 0xca020000 [0003.210] I> 0) Base:0x00000000 Size:0x00000000 [0003.210] I> 1) Base:0xc8300000 Size:0x00100000 [0003.210] I> 2) Base:0xc9800000 Size:0x00200000 [0003.211] I> 3) Base:0xc8600000 Size:0x00200000 [0003.213] I> 4) Base:0xc8200000 Size:0x00100000 [0003.218] I> 5) Base:0xc8100000 Size:0x00100000 [0003.222] I> 6) Base:0xc9400000 Size:0x00400000 [0003.227] I> 7) Base:0xc9000000 Size:0x00400000 [0003.231] I> 8) Base:0xc8000000 Size:0x00100000 [0003.236] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.240] I> 10) Base:0xca800000 Size:0x00800000 [0003.245] I> 11) Base:0x40000000 Size:0x00040000 [0003.249] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.253] I> 13) Base:0x40046000 Size:0x00002000 [0003.258] I> 14) Base:0x40048000 Size:0x00002000 [0003.262] I> 15) Base:0xaf000000 Size:0x00004000 [0003.267] I> 16) Base:0x4004a000 Size:0x00002000 [0003.271] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.276] I> 18) Base:0x4004c000 Size:0x00002000 [0003.280] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.285] I> 20) Base:0x4004e000 Size:0x00002000 [0003.289] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.294] I> 22) Base:0x00000000 Size:0x00000000 [0003.298] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.303] I> 24) Base:0xcc000000 Size:0x02000000 [0003.307] I> 25) Base:0x40050000 Size:0x00002000 [0003.312] I> 26) Base:0x40040000 Size:0x00006000 [0003.316] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.320] I> 28) Base:0xc8400000 Size:0x00200000 [0003.325] I> 29) Base:0xc8800000 Size:0x00400000 [0003.329] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.334] I> 31) Base:0x00000000 Size:0x00000000 [0003.338] I> 32) Base:0xf8000000 Size:0x08000000 [0003.343] I> 33) Base:0xce000000 Size:0x2a000000 [0003.347] I> 34) Base:0xcb000000 Size:0x01000000 [0003.352] I> 35) Base:0xae000000 Size:0x01000000 [0003.356] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.361] I> 37) Base:0xca000000 Size:0x00800000 [0003.365] I> 38) Base:0x80000000 Size:0x20000000 [0003.370] I> 39) Base:0xb0000000 Size:0x08000000 [0003.374] I> 40) Base:0x00000000 Size:0x00000000 [0003.378] I> 41) Base:0x00000000 Size:0x00000000 [0003.383] I> 42) Base:0x00000000 Size:0x00000000 [0003.387] I> 43) Base:0x00000000 Size:0x00000000 [0003.392] I> 44) Base:0x00000000 Size:0x00000000 [0003.396] I> 45) Base:0x00000000 Size:0x00000000 [0003.401] GIC-SPI Target CPU: 0 [0003.404] Interrupts Init done [0003.407] calling constructors [0003.410] initializing heap [0003.412] I> Heap: [0xa0960000 ... 0xadf00000] [0003.416] initializing threads [0003.419] initializing timers [0003.422] creating bootstrap completion thread [0003.426] top of bootstrap2() [0003.429] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.434] initializing platform [0003.437] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.442] W> device prod register failed [0003.446] I> Bl_dtb @0xadf00000 [0003.449] I> gpio framework initialized [0003.460] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.490] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.498] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.508] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.516] I> QSPI source rate = 204000 Khz [0003.519] I> Requested rate for QSPI clock = 34000 Khz [0003.524] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.529] I> tx_clk_tap_delay : 0 [0003.531] I> rx_clk_tap_delay : 16 [0003.535] I> QSPI Flash Size = 32 MB [0003.543] I> Qspi initialized successfully [0003.543] I> qspi flash-0 params source = boot args [0003.547] W> No board IDs available [0003.550] E> Failed to get board id info! [0003.556] I> sdmmc-3 params source = safe params [0003.563] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.564] W> Cannot find any partition table for 00000003 [0003.569] E> Failed to publish 00000003 [0003.574] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.607] I> regulator 'vdd-hdmi-5v0' already enabled [0003.607] I> hdmi cable connected [0003.611] W> set volts not configured for 'vdd-1v0' [0003.615] W> set volts not configured for 'vdd-1v8-hs' [0003.616] I> retrieved tmds range from prod_list_hdmi_soc [0003.621] E> invalid display type [0003.623] E> cannot find any other nvdisp nodes [0003.639] I> edid read success [0003.651] I> edid read success [0003.652] I> width = 640, height = 480, frequency = 25174825 [0003.652] I> width = 1920, height = 1080, frequency = 148500000 [0003.653] I> width = 1280, height = 768, frequency = 79500000 [0003.653] I> width = 1360, height = 768, frequency = 85500000 [0003.653] I> width = 720, height = 480, frequency = 26973026 [0003.657] I> width = 720, height = 576, frequency = 26973026 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.686] I> width = 720, height = 480, frequency = 26973026 [0003.691] I> width = 720, height = 576, frequency = 26973026 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 4096, height = 2160, frequency = 296703296 [0003.725] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.737] I> hdmi_enable, starting HDMI initialisation [0003.742] I> hdmi_enable, HDMI initialisation complete [0003.751] initializing target [0003.752] calling apps_init() [0003.753] starting app kernel_boot_app [0003.753] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.001042] Console: colour dummy device 80x25 [ 0.002386] printk: console [tty0] enabled [ 0.002446] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002481] pid_max: default: 32768 minimum: 301 [ 0.002665] LSM: Security Framework initializing [ 0.002726] Yama: becoming mindful. [ 0.002771] SELinux: Initializing. [ 0.002960] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002998] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006241] rcu: Hierarchical SRCU implementation. [ 0.006506] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007805] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007858] DTB Build time: Aug 10 2022 20:31:49 [ 0.012420] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.012691] Remapping and enabling EFI services. [ 0.014826] smp: Bringing up secondary CPUs ... [ 0.043872] Detected PIPT I-cache on CPU1 [ 0.043982] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.076552] Detected PIPT I-cache on CPU2 [ 0.076629] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.106254] Detected PIPT I-cache on CPU3 [ 0.106391] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.136134] Detected PIPT I-cache on CPU4 [ 0.136231] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.166574] Detected PIPT I-cache on CPU5 [ 0.166738] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.167039] smp: Brought up 1 node, 6 CPUs [ 0.167169] SMP: Total of 6 processors activated. [ 0.167245] CPU features: detected: Privileged Access Never [ 0.167269] CPU features: detected: LSE atomic instructions [ 0.167283] CPU features: detected: User Access Override [ 0.167297] CPU features: detected: 32-bit EL0 Support [ 0.167310] CPU features: detected: RAS Extension Support [ 0.167323] CPU features: detected: CRC32 instructions [ 0.167337] CPU features: detected: 32-bit EL1 Support [ 0.239410] CPU: All CPU(s) started at EL2 [ 0.245729] devtmpfs: initialized [ 0.293041] Registered cp15_barrier emulation handler [ 0.293165] Registered setend emulation handler [ 0.293185] KASLR enabled [ 0.293552] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.293577] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.294937] pinctrl core: initialized pinctrl subsystem [ 0.296025] SMBIOS 3.0.0 present. [ 0.296054] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.296697] NET: Registered protocol family 16 [ 0.298699] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.299194] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.299883] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.299942] audit: initializing netlink subsys (disabled) [ 0.300180] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1 [ 0.300624] thermal_sys: Registered thermal governor 'step_wise' [ 0.300630] thermal_sys: Registered thermal governor 'power_allocator' [ 0.300643] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.302992] cpuidle: using governor menu [ 0.303369] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.303769] ASID allocator initialised with 32768 entries [ 0.304003] Serial: AMBA PL011 UART driver [ 0.307953] Tegra reboot handler registered. [ 0.383615] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.383737] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.383915] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.383956] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.384071] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.384138] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.384284] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.384323] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.384442] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.384479] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.386850] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.386884] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.386913] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.386941] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.386971] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.386999] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.387033] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.387065] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.387102] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.387158] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.387185] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.387208] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.387230] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.387253] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.387286] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.387309] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.387332] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.387415] mc-err: mcerr ops are set to t19x [ 0.400272] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.400301] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.400314] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.400327] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.406727] ACPI: Interpreter disabled. [ 0.407955] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.409181] iommu: Default domain type: Translated [ 0.409236] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.409600] SCSI subsystem initialized [ 0.409780] usbcore: registered new interface driver usbfs [ 0.409822] usbcore: registered new interface driver hub [ 0.409877] usbcore: registered new device driver usb [ 0.410336] mc: Linux media interface: v0.10 [ 0.410365] videodev: Linux video capture interface: v2.00 [ 0.410695] pps_core: LinuxPPS API ver. 1 registered [ 0.410708] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.410729] PTP clock support registered [ 0.410937] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.411393] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.411449] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.412029] Registered efivars operations [ 0.417472] FPGA manager framework [ 0.417608] Advanced Linux Sound Architecture Driver Initialized. [ 0.418203] Bluetooth: Core ver 2.22 [ 0.418240] NET: Registered protocol family 31 [ 0.418252] Bluetooth: HCI device and connection manager initialized [ 0.418267] Bluetooth: HCI socket layer initialized [ 0.418282] Bluetooth: L2CAP socket layer initialized [ 0.418304] Bluetooth: SCO socket layer initialized [ 0.420057] camchar: rtcpu character device driver loaded [ 0.421045] clocksource: Switched to clocksource arch_sys_counter [ 0.814875] VFS: Disk quotas dquot_6.6.0 [ 0.814962] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.815500] pnp: PnP ACPI: disabled [ 0.829352] la/ptsa driver initialized. [ 0.829520] NET: Registered protocol family 2 [ 0.829722] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.837732] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.837896] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.838256] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.838885] TCP: Hash tables configured (established 65536 bind 65536) [ 0.839027] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.839166] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.839413] NET: Registered protocol family 1 [ 0.840226] RPC: Registered named UNIX socket transport module. [ 0.840255] RPC: Registered udp transport module. [ 0.840279] RPC: Registered tcp transport module. [ 0.840294] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.840334] PCI: CLS 0 bytes, default 64 [ 0.840725] Trying to unpack rootfs image as initramfs... [ 1.107174] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.110346] Freeing initrd memory: 8196K [ 1.115995] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.116032] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.116100] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.116695] kvm [1]: IPA Size Limit: 40 bits [ 1.117299] kvm [1]: vgic interrupt IRQ9 [ 1.117953] kvm [1]: VHE mode initialized successfully [ 1.119943] Initialise system trusted keyrings [ 1.120304] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.127969] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.129198] NFS: Registering the id_resolver key type [ 1.129248] Key type id_resolver registered [ 1.129264] Key type id_legacy registered [ 1.129361] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.129388] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.129432] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.140462] NET: Registered protocol family 38 [ 1.140487] Key type asymmetric registered [ 1.140504] Asymmetric key parser 'x509' registered [ 1.140555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.140872] io scheduler mq-deadline registered [ 1.140893] io scheduler kyber registered [ 1.147753] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.151086] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.151168] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.151242] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.151340] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.151467] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.158925] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.158962] scrncapt: init (heads:4 wins:6 planes:4) [ 1.160272] EINJ: ACPI disabled. [ 1.164715] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.164745] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.164792] tegra-pmc: ### PMC reset level: L1 [ 1.164810] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.164858] tegra-pmc: PMC Prod config success [ 1.170540] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.176809] random: fast init done [ 1.177190] printk: console [ttyTCU0] enabled [ 2.728868] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.733087] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.738040] arm-smmu 10000000.iommu: stage 1 translation [ 2.743245] arm-smmu 10000000.iommu: stage 2 translation [ 2.748917] arm-smmu 10000000.iommu: nested translation [ 2.754022] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.761187] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.772723] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.774281] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.781100] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.788624] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.794141] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.798890] arm-smmu 12000000.iommu: stage 1 translation [ 2.804373] arm-smmu 12000000.iommu: stage 2 translation [ 2.809831] arm-smmu 12000000.iommu: nested translation [ 2.814970] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.822148] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.833843] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.835243] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.841830] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.849464] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.859418] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.862358] tegra_profiler: auth: init [ 2.866574] THERMAL EST: found 3 subdevs [ 2.870188] THERMAL EST num_resources: 0 [ 2.874025] [THERMAL EST subdev 0] [ 2.877346] [THERMAL EST subdev 1] [ 2.880479] [THERMAL EST subdev 2] [ 2.883771] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.890229] THERMAL EST: thz register success. [ 2.894729] THERMAL EST: end of probe, return err: 0 [ 2.900083] nvsciipc: loaded module [ 2.907636] tun: Universal TUN/TAP device driver, 1.6 [ 2.909764] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.915772] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.921387] e1000e: Intel(R) PRO/1000 Network Driver [ 2.926003] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.932098] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.937405] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.943874] PPP generic driver version 2.4.2 [ 2.948073] PPP BSD Compression module registered [ 2.952616] PPP Deflate Compression module registered [ 2.957894] PPP MPPE Compression module registered [ 2.962619] usbcore: registered new interface driver r8152 [ 2.968124] usbcore: registered new interface driver asix [ 2.973712] usbcore: registered new interface driver ax88179_178a [ 2.979863] usbcore: registered new interface driver cdc_ether [ 2.985801] usbcore: registered new interface driver net1080 [ 2.991133] usbcore: registered new interface driver cdc_subset [ 2.997426] usbcore: registered new interface driver zaurus [ 3.003125] usbcore: registered new interface driver cdc_ncm [ 3.008541] usbcore: registered new interface driver aqc111 [ 3.014257] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.020267] ohci-pci: OHCI PCI platform driver [ 3.024559] ohci-platform: OHCI generic platform driver [ 3.030524] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.037220] usbcore: registered new interface driver uas [ 3.040839] usbcore: registered new interface driver usb-storage [ 3.047136] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.053406] mousedev: PS/2 mouse device common for all mice [ 3.058017] usbcore: registered new interface driver xpad [ 3.066172] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.068981] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.076891] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.083578] i2c /dev entries driver [ 3.086739] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.092555] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.098023] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.103320] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.108620] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.114135] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.119462] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.132639] device-mapper: uevent: version 1.0.3 [ 3.133169] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.139490] cpuidle: Initializing cpuidle driver [ 3.143530] sdhci: Secure Digital Host Controller Interface driver [ 3.148357] sdhci: Copyright(c) Pierre Ossman [ 3.152711] Synopsys Designware Multimedia Card Interface Driver [ 3.158715] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.164991] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.165657] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.178044] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.196812] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.206047] vdd-1v0: supplied by regulator-dummy [ 3.211574] vdd-1v8-hs: supplied by regulator-dummy [ 3.216378] vdd-1v8-ls: supplied by regulator-dummy [ 3.221135] vdd-1v8-ao: supplied by regulator-dummy [ 3.225051] vddio-ddr-1v1: supplied by regulator-dummy [ 3.229405] vdd-rtc: supplied by regulator-dummy [ 3.231044] spmic-ldo1: supplied by regulator-dummy [ 3.232184] vdd-ao-3v3: supplied by regulator-dummy [ 3.238198] vddio-emmc-3v3: supplied by regulator-dummy [ 3.244357] spmic-ldo4: supplied by regulator-dummy [ 3.245524] vdd-usb-3v3: supplied by regulator-dummy [ 3.251559] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.257694] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.263148] spmic-ldo8: supplied by vdd-1v8-ls [ 3.264521] gpio-510 (gpio_default): hogged as output/high [ 3.265871] gpio-511 (gpio_default): hogged as output/high [ 3.271432] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.410161] max77686-rtc max77620-rtc: registered as rtc0 [ 3.411146] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.411447] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.119591] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.120542] hid: raw HID events driver (C) Jiri Kosina [ 4.121210] usbcore: registered new interface driver usbhid [ 4.121361] usbhid: USB HID core driver [ 4.123012] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.124132] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.221386] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.297034] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.457 ms) ÿá[ 4.209464] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.210021] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.211228] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.212036] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.213755] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.214355] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.214943] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.216390] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.216715] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.219061] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.225942] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.232304] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.237644] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.244161] denver_knobs_init:MTS_VERSION:55637613 [ 4.256580] t19x_cache tegra-cache: probed [ 4.259503] optee: probing for conduit method. [ 4.260414] optee: revision 3.16 (65cc2218) [ 4.261962] optee: dynamic shared memory is enabled [ 4.264584] optee: initialized driver [ 4.271198] nvpmodel: initialized successfully [ 4.272211] tegra_hv: get_hvd: not initialized yet [ 4.276724] user_ivc_mempool: hypervisor not present [ 4.283365] usbcore: registered new interface driver snd-usb-audio [ 4.289375] u32 classifier [ 4.290406] input device check on [ 4.294312] Actions configured [ 4.297820] Initializing XFRM netlink socket [ 4.302614] NET: Registered protocol family 10 [ 4.309187] Segment Routing with IPv6 [ 4.310216] NET: Registered protocol family 17 [ 4.314491] NET: Registered protocol family 15 [ 4.318661] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.332499] Bluetooth: RFCOMM socket layer initialized [ 4.337333] Bluetooth: RFCOMM ver 1.11 [ 4.341082] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.346724] Bluetooth: HIDP socket layer initialized [ 4.352967] 9pnet: Installing 9P2000 support [ 4.356543] Key type dns_resolver registered [ 4.362419] registered taskstats version 1 [ 4.364501] Loading compiled-in X.509 certificates [ 4.379134] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.380700] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.391100] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.392444] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.401340] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.409418] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.525144] tegra194-pcie 14160000.pcie: Link up [ 4.528253] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.528515] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.528660] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.528960] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.529235] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.529679] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.530180] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.542172] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.542592] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.543173] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.544804] pci 0004:01:00.0: supports D1 D2 [ 4.545144] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.556039] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.556351] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.556621] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.557172] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.557454] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.557649] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.559908] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.567331] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.575602] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.585866] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.590562] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.596141] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.603513] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.612597] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.613573] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.622087] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.630797] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.745946] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.746458] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.746690] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.746900] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.747232] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.747473] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.747954] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.748427] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.769306] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.769692] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.771471] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.772806] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.774562] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.776318] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.777612] pci 0005:00:00.0: Removing from iommu group 7 [ 5.777911] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.812729] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.838731] host1x 13e10000.host1x: initialized [ 5.840665] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.841877] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.843381] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.844254] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.845939] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.846671] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.847964] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.848734] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.849974] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.850739] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.856379] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.863251] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.873357] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.880236] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.890240] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.897122] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.907302] falcon 15340000.vic: Adding to iommu group 17 [ 5.922406] falcon 15340000.vic: initialized [ 5.923447] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.929618] falcon 15380000.nvjpg: initialized [ 5.930343] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.940489] falcon 154c0000.nvenc: initialized [ 5.941266] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.950220] falcon 15a80000.nvenc1: initialized [ 5.950949] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.965434] nvdec 15480000.nvdec: initialized [ 5.966404] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.976830] nvdec 15140000.nvdec1: initialized [ 5.977638] tsec 15500000.tsec: Adding to iommu group 18 [ 5.983650] tsec 15500000.tsec: initialized [ 5.984242] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.989740] tsec 15100000.tsecb: initialized [ 5.994167] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.021369] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.034292] gpio-374 (wifi-enable): hogged as output/high [ 6.034579] gpio-431 (camera-control-output-low): hogged as output/low [ 6.034939] gpio-432 (camera-control-output-low): hogged as output/low [ 6.036895] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.039437] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.040144] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.042199] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.043596] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.049979] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.055767] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.064545] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.070817] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.082417] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.087525] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.093086] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.102152] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.111144] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.118858] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.126163] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.132203] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.142115] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.148301] pva 16000000.pva0: Adding to iommu group 22 [ 6.176373] pva 16000000.pva0: initialized [ 6.181482] pva 16800000.pva1: Adding to iommu group 23 [ 6.193510] pva 16800000.pva1: initialized [ 6.198854] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.212942] nvdla 15880000.nvdla0: initialized [ 6.214277] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.223218] nvdla 158c0000.nvdla1: initialized [ 6.226485] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.226868] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.227086] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.227383] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.227858] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.227871] tegradccommon 15200000.display-hub: dma mapping done [ 6.228214] tegradc 15200000.display: Adding to iommu group 26 [ 6.228227] tegradc 15210000.display: Adding to iommu group 26 [ 6.230181] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.237041] tegradc 15210000.display: disp0 connected to head1->sor [ 6.238298] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.243625] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.249979] tegra_cec 3960000.tegra_cec: probed [ 6.255794] tegradc 15210000.display: DT parsed successfully [ 6.264162] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.267584] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.268041] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.276218] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.279326] generic_infoframe_type: 0x87 [ 6.287452] kfuse 3830000.kfuse: initialized [ 6.293393] tegradc 15200000.display: DT parsed successfully [ 6.300896] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.303917] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.308005] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.308757] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.317849] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.321714] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.328348] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.337266] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.340635] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.350097] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.358925] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.367757] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.372198] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.373975] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.380991] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.393991] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.436466] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.441289] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.450805] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.456074] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.464539] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.473275] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.479943] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.487487] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.494172] usb usb1: Product: xHCI Host Controller [ 6.499375] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.505614] usb usb1: SerialNumber: 3610000.xhci [ 6.511828] hub 1-0:1.0: USB hub found [ 6.514198] hub 1-0:1.0: 4 ports detected [ 6.518839] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.523549] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.530886] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.538727] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.546488] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.553701] usb usb2: Product: xHCI Host Controller [ 6.558922] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.564922] usb usb2: SerialNumber: 3610000.xhci [ 6.570511] hub 2-0:1.0: USB hub found [ 6.573655] hub 2-0:1.0: 4 ports detected [ 6.617545] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.623786] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.625330] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.625526] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.638757] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.639926] tegra194-cpufreq ccplex: probed with BWMGR [ 6.641238] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.641781] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.642241] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.643399] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.650589] tegra194-vi5 15c10000.vi: initialized [ 6.652030] tegradc 15210000.display: disp0 connected to head1->sor [ 6.653481] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.653674] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.660069] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.667940] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.675309] tegradc 15210000.display: DT parsed successfully [ 6.681278] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.687082] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.688031] mmc0: CQHCI version 5.10 [ 6.693661] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.693666] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.705064] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.705449] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.711626] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.711632] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.712887] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.717035] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.718570] generic_infoframe_type: 0x87 [ 6.731173] tegradc 15200000.display: DT parsed successfully [ 6.744887] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.752283] nvethernet 2490000.ethernet: Macsec not supported [ 6.754285] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.760788] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.765423] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.769614] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.769626] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.777064] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.777780] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.783819] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.791493] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.799545] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.799894] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.801571] mmc0: Command Queue Engine enabled [ 6.801577] mmc0: periodic cache flush enabled [ 6.801594] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.802170] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.802367] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.806113] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.806624] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.866182] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.870208] tegra-se-nvhost 15810000.se: initialized [ 6.874345] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.876931] tegradc 15200000.display: probed [ 6.886310] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.938529] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.945194] tegra-se-nvhost 15820000.se: initialized [ 6.949384] Console: switching to colour frame buffer device 240x67 [ 6.950962] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.952356] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.952367] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.952371] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.952375] usb 1-2: Manufacturer: Generic [ 6.954348] hub 1-2:1.0: USB hub found [ 6.955338] tegradc 15200000.display: fb registered [ 6.955733] hub 1-2:1.0: 4 ports detected [ 6.961749] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.970084] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.977878] tegra-se-nvhost 15830000.se: initialized [ 6.982914] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.987033] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.990003] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.995519] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.040511] tegra-se-nvhost 15840000.se: initialized [ 7.046477] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.052615] tegra_actmon d230000.actmon: in actmon_register()... [ 7.056725] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.058079] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.062050] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.062687] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.071998] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.079063] hvc_sysfs: hypervisor is not present [ 7.086306] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.098527] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.114817] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.121981] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.122369] ALSA device list: [ 7.123345] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.123356] Extcon AUX1(HDMI) enable [ 7.123514] tegradc 15210000.display: disp1 connected to head1->sor [ 7.123669] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.123750] tegradc 15210000.display: DT parsed successfully [ 7.123783] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.123884] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.123908] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.126962] usb 2-3: Manufacturer: Generic [ 7.130339] tegradc 15210000.display: probed [ 7.137399] No soundcards found. [ 7.137859] hub 2-3:1.0: USB hub found [ 7.139727] hub 2-3:1.0: 4 ports detected [ 7.200484] tegradc 15210000.display: fb registered [ 7.203930] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.212369] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.212383] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.217077] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.221497] Freeing unused kernel memory: 3968K [ 7.237075] tegradc 15210000.display: blank - powerdown [ 7.237182] Run /init as init process [ 7.242197] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.254098] Extcon DP: HPD disabled [ 7.257812] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.264224] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.269084] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.272318] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.276782] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.297231] tegradc 15200000.display: blank - powerdown [ 7.315433] Root device found: mmcblk0p1 [ 7.317412] Found dev node: /dev/mmcblk0p1 [ 7.341830] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.341845] Extcon AUX1(HDMI) disable [ 7.352812] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.357053] Rootfs mounted over mmcblk0p1 [ 7.365410] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.366328] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.370232] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.370246] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.370250] usb 1-3: Product: Bluetooth Radio [ 7.370253] usb 1-3: Manufacturer: Realtek [ 7.370257] usb 1-3: SerialNumber: 00e04c000001 [ 7.378283] tegradc 15200000.display: unblank [ 7.379355] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.379552] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.385479] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.387413] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.391450] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.391461] Extcon AUX1(HDMI) enable [ 7.399681] random: crng init done [ 7.402149] Switching from initrd to actual rootfs [ 7.404179] tegradc 15200000.display: sync windows ret = 247 [ 7.449437] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.456310] Extcon HDMI: HPD enabled [ 7.460064] tegradc 15200000.display: hdmi: plugged [ 7.564157] systemd[1]: System time before build time, advancing clock. [ 7.634281] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.639200] systemd[1]: Detected architecture arm64. [ 7.681124] systemd[1]: Set hostname to . [ 7.840930] systemd-sysv-generator[247]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.182808] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.184550] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.190340] systemd[1]: Created slice system-modprobe.slice. [ 8.195199] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.199498] systemd[1]: Created slice User and Session Slice. [ 8.203225] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.207521] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.211017] systemd[1]: Reached target User and Group Name Lookups. [ 8.214050] systemd[1]: Reached target Slices. [ 8.216969] systemd[1]: Reached target Swap. [ 8.220828] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.224352] systemd[1]: Listening on Syslog Socket. [ 8.227766] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.230990] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.235104] systemd[1]: Listening on Journal Audit Socket. [ 8.240130] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.243770] systemd[1]: Listening on Journal Socket. [ 8.248843] systemd[1]: Listening on udev Control Socket. [ 8.252200] systemd[1]: Listening on udev Kernel Socket. [ 8.260785] systemd[1]: Mounting Huge Pages File System... [ 8.268862] systemd[1]: Mounting POSIX Message Queue File System... [ 8.276772] systemd[1]: Mounting RPC Pipe File System... [ 8.285196] systemd[1]: Mounting Kernel Debug File System... [ 8.293784] systemd[1]: Mounting Kernel Trace File System... [ 8.303729] systemd[1]: Starting Journal Service... [ 8.312648] systemd[1]: Starting Set the console keyboard layout... [ 8.320704] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.324339] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.330670] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.338724] systemd[1]: Started Nameserver information manager. [ 8.343688] systemd[1]: Reached target Network (Pre). [ 8.351353] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.353311] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.360092] systemd[1]: Starting Load Kernel Modules... [ 8.369109] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.376732] systemd[1]: Starting udev Coldplug all Devices... [ 8.386894] systemd[1]: Mounted Huge Pages File System. [ 8.391985] systemd[1]: Mounted POSIX Message Queue File System. [ 8.395699] systemd[1]: Mounted RPC Pipe File System. [ 8.397339] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.400182] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.402504] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.403972] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.405474] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.406731] systemd[1]: Mounted Kernel Debug File System. [ 8.406848] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.407128] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.411193] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.411374] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.414075] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.421747] systemd[1]: Mounted Kernel Trace File System. [ 8.430362] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.437095] systemd[1]: nvfb-udev.service: Succeeded. [ 8.441722] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.454624] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.466836] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.468675] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.475917] systemd[1]: Starting Load/Save Random Seed... [ 8.484896] systemd[1]: Starting Create System Users... [ 8.517518] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.517518] [ 8.538723] systemd[1]: Finished Load/Save Random Seed. [ 8.547983] systemd[1]: Finished Load Kernel Modules. [ 8.552996] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.559628] systemd[1]: Mounting Kernel Configuration File System... [ 8.567911] systemd[1]: Started OP-TEE Client Supplicant. [ 8.576198] systemd[1]: Starting Apply Kernel Variables... [ 8.584067] systemd[1]: Mounted Kernel Configuration File System. [ 8.590649] systemd[1]: Finished Set the console keyboard layout. [ 8.602617] systemd[1]: Finished Create System Users. [ 10.001807] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.008516] imx219 9-0010: board setup failed [ 10.009924] imx219: probe of 9-0010 failed with error -121 [ 10.022140] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.032092] imx219 10-0010: board setup failed [ 10.033428] imx219: probe of 10-0010 failed with error -121 [ 10.139489] hot-surface-alert cooling state: 0 -> 1 [ 10.279880] using random self ethernet address [ 10.281085] using random host ethernet address [ 11.763132] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.764857] Creating 1 MTD partitions on "spi6.0": [ 11.767021] 0x000000000000-0x000002000000 : "Whole_flash0" [ 11.990990] using random self ethernet address [ 11.992662] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 37.810105] nvidia: loading out-of-tree module taints kernel. [ 58.595094] watchdog: watchdog0: watchdog did not stop! [ 59.085710] Trying to unregister non-registered hwtime source [ 62.143593] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 62.145040] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:9ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.077] I> Qspi-0 initialized successfully [0000.081] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.088] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 65500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.120] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.128] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.905] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.915] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.922] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.323] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.584] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.585] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized noc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 aÿâavfs_clk_platform_post initialized ÿäarÿâcvc_late initialized regulator_post initialized ÿäch64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized entering main console loop ] bpmp: init complete ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.222] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.280] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.338] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.396] GIC-SPI Target CPU: 0 [0003.399] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.482] I> register 'maxim' power off handle [0003.485] I> virtual i2c enabled [0003.485] I> registered 'maxim,max20024' pmic [0003.485] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.486] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.493] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.530] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.560] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.569] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.588] I> regulator 'vdd-hdmi-5v0' already enabled [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> hdmi cable connected [0003.600] W> set volts not configured for 'vdd-1v0' [0003.605] W> set volts not configured for 'vdd-1v8-hs' [0003.605] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.629] I> edid read success [0003.641] I> edid read success [0003.641] I> width = 640, height = 480, frequency = 25174825 [0003.642] I> width = 1920, height = 1080, frequency = 148500000 [0003.642] I> width = 1280, height = 768, frequency = 79500000 [0003.643] I> width = 1360, height = 768, frequency = 85500000 [0003.643] I> width = 720, height = 480, frequency = 26973026 [0003.647] I> width = 720, height = 576, frequency = 26973026 [0003.653] I> width = 1280, height = 720, frequency = 74175824 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1920, height = 1080, frequency = 148351648 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 720, height = 480, frequency = 26973026 [0003.681] I> width = 720, height = 576, frequency = 26973026 [0003.686] I> width = 3840, height = 2160, frequency = 296703296 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 4096, height = 2160, frequency = 296703296 [0003.715] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.726] I> hdmi_enable, starting HDMI initialisation [0003.731] I> hdmi_enable, HDMI initialisation complete [0003.741] initializing target [0003.741] calling apps_init() [0003.742] starting app kernel_boot_app [0003.743] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000752] Console: colour dummy device 80x25 [ 0.002134] printk: console [tty0] enabled [ 0.002194] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002232] pid_max: default: 32768 minimum: 301 [ 0.002399] LSM: Security Framework initializing [ 0.002455] Yama: becoming mindful. [ 0.002498] SELinux: Initializing. [ 0.002637] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002675] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005452] rcu: Hierarchical SRCU implementation. [ 0.005740] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006664] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006712] DTB Build time: Aug 10 2022 20:31:49 [ 0.009400] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009752] Remapping and enabling EFI services. [ 0.011792] smp: Bringing up secondary CPUs ... [ 0.041035] Detected PIPT I-cache on CPU1 [ 0.041110] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.070606] Detected PIPT I-cache on CPU2 [ 0.070704] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100406] Detected PIPT I-cache on CPU3 [ 0.100549] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130203] Detected PIPT I-cache on CPU4 [ 0.130302] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160995] Detected PIPT I-cache on CPU5 [ 0.161103] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.161488] smp: Brought up 1 node, 6 CPUs [ 0.161695] SMP: Total of 6 processors activated. [ 0.161791] CPU features: detected: Privileged Access Never [ 0.161814] CPU features: detected: LSE atomic instructions [ 0.161827] CPU features: detected: User Access Override [ 0.161841] CPU features: detected: 32-bit EL0 Support [ 0.161854] CPU features: detected: RAS Extension Support [ 0.161867] CPU features: detected: CRC32 instructions [ 0.161881] CPU features: detected: 32-bit EL1 Support [ 0.231672] CPU: All CPU(s) started at EL2 [ 0.237543] devtmpfs: initialized [ 0.287150] Registered cp15_barrier emulation handler [ 0.287301] Registered setend emulation handler [ 0.287323] KASLR enabled [ 0.287580] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.287605] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.288897] pinctrl core: initialized pinctrl subsystem [ 0.289922] SMBIOS 3.0.0 present. [ 0.289950] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.290601] NET: Registered protocol family 16 [ 0.292474] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.292982] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.293697] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.293758] audit: initializing netlink subsys (disabled) [ 0.294031] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.294421] thermal_sys: Registered thermal governor 'step_wise' [ 0.294427] thermal_sys: Registered thermal governor 'power_allocator' [ 0.294444] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.296680] cpuidle: using governor menu [ 0.297050] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.297491] ASID allocator initialised with 32768 entries [ 0.297722] Serial: AMBA PL011 UART driver [ 0.300748] Tegra reboot handler registered. [ 0.374439] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.374594] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.374770] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.374820] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.374946] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.374987] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.375116] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.375156] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.375268] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.375329] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.377706] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.377737] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.377764] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.377788] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.377815] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.377839] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.377863] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.377906] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.377940] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.377980] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.378005] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.378044] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.378069] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.378093] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.378116] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.378141] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.378165] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.378251] mc-err: mcerr ops are set to t19x [ 0.390481] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390509] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390523] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390536] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.397786] ACPI: Interpreter disabled. [ 0.398978] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400256] iommu: Default domain type: Translated [ 0.400330] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.400683] SCSI subsystem initialized [ 0.400846] usbcore: registered new interface driver usbfs [ 0.400890] usbcore: registered new interface driver hub [ 0.400925] usbcore: registered new device driver usb [ 0.401311] mc: Linux media interface: v0.10 [ 0.401339] videodev: Linux video capture interface: v2.00 [ 0.401630] pps_core: LinuxPPS API ver. 1 registered [ 0.401643] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.401663] PTP clock support registered [ 0.401867] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.402176] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.402267] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.402849] Registered efivars operations [ 0.409863] FPGA manager framework [ 0.409971] Advanced Linux Sound Architecture Driver Initialized. [ 0.410555] Bluetooth: Core ver 2.22 [ 0.410594] NET: Registered protocol family 31 [ 0.410605] Bluetooth: HCI device and connection manager initialized [ 0.410620] Bluetooth: HCI socket layer initialized [ 0.410636] Bluetooth: L2CAP socket layer initialized [ 0.410656] Bluetooth: SCO socket layer initialized [ 0.412301] camchar: rtcpu character device driver loaded [ 0.413049] clocksource: Switched to clocksource arch_sys_counter [ 0.861928] VFS: Disk quotas dquot_6.6.0 [ 0.862075] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.862548] pnp: PnP ACPI: disabled [ 0.878081] la/ptsa driver initialized. [ 0.878230] NET: Registered protocol family 2 [ 0.878470] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.887432] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.887539] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.887918] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.888579] TCP: Hash tables configured (established 65536 bind 65536) [ 0.888749] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.888888] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.889492] NET: Registered protocol family 1 [ 0.890503] RPC: Registered named UNIX socket transport module. [ 0.890531] RPC: Registered udp transport module. [ 0.890576] RPC: Registered tcp transport module. [ 0.890592] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.890632] PCI: CLS 0 bytes, default 64 [ 0.890985] Trying to unpack rootfs image as initramfs... [ 1.163039] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.166417] Freeing initrd memory: 8196K [ 1.171079] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.171114] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.171177] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.171550] kvm [1]: IPA Size Limit: 40 bits [ 1.171946] kvm [1]: vgic interrupt IRQ9 [ 1.172451] kvm [1]: VHE mode initialized successfully [ 1.174098] Initialise system trusted keyrings [ 1.174413] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.180649] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.181562] NFS: Registering the id_resolver key type [ 1.181610] Key type id_resolver registered [ 1.181626] Key type id_legacy registered [ 1.181707] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.181730] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.181770] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.191731] NET: Registered protocol family 38 [ 1.191757] Key type asymmetric registered [ 1.191772] Asymmetric key parser 'x509' registered [ 1.191823] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.192073] io scheduler mq-deadline registered [ 1.192091] io scheduler kyber registered [ 1.198334] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.201431] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.201515] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.201621] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.201697] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.201770] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.207484] scrncapt: init (heads:4 wins:6 planes:4) [ 1.207684] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.208683] EINJ: ACPI disabled. [ 1.212235] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.212260] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.212275] tegra-pmc: ### PMC reset level: L1 [ 1.212288] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.212365] tegra-pmc: PMC Prod config success [ 1.217905] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.230441] random: fast init done [ 1.235161] printk: console [ttyTCU0] enabled [ 2.775670] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.780125] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.784699] arm-smmu 10000000.iommu: stage 1 translation [ 2.790290] arm-smmu 10000000.iommu: stage 2 translation [ 2.795419] arm-smmu 10000000.iommu: nested translation [ 2.800746] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.808180] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.820058] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.821048] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.827865] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.835470] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.840645] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.845626] arm-smmu 12000000.iommu: stage 1 translation [ 2.851135] arm-smmu 12000000.iommu: stage 2 translation [ 2.856313] arm-smmu 12000000.iommu: nested translation [ 2.861992] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.869168] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.881010] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.882030] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.888878] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.896337] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.905762] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.908977] tegra_profiler: auth: init [ 2.913588] THERMAL EST: found 3 subdevs [ 2.916660] THERMAL EST num_resources: 0 [ 2.920796] [THERMAL EST subdev 0] [ 2.923857] [THERMAL EST subdev 1] [ 2.927524] [THERMAL EST subdev 2] [ 2.930511] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.936949] THERMAL EST: thz register success. [ 2.941213] THERMAL EST: end of probe, return err: 0 [ 2.946521] nvsciipc: loaded module [ 2.953868] tun: Universal TUN/TAP device driver, 1.6 [ 2.955996] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.962534] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.967840] e1000e: Intel(R) PRO/1000 Network Driver [ 2.973046] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.978850] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.984398] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.990549] PPP generic driver version 2.4.2 [ 2.994877] PPP BSD Compression module registered [ 2.999403] PPP Deflate Compression module registered [ 3.004623] PPP MPPE Compression module registered [ 3.009387] usbcore: registered new interface driver r8152 [ 3.015150] usbcore: registered new interface driver asix [ 3.020220] usbcore: registered new interface driver ax88179_178a [ 3.026604] usbcore: registered new interface driver cdc_ether [ 3.032549] usbcore: registered new interface driver net1080 [ 3.037915] usbcore: registered new interface driver cdc_subset [ 3.044200] usbcore: registered new interface driver zaurus [ 3.049912] usbcore: registered new interface driver cdc_ncm [ 3.055306] usbcore: registered new interface driver aqc111 [ 3.060966] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.067026] ohci-pci: OHCI PCI platform driver [ 3.071584] ohci-platform: OHCI generic platform driver [ 3.077482] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.083523] usbcore: registered new interface driver uas [ 3.087627] usbcore: registered new interface driver usb-storage [ 3.094080] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.099823] mousedev: PS/2 mouse device common for all mice [ 3.105072] usbcore: registered new interface driver xpad [ 3.112841] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.115791] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.123576] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.130083] i2c /dev entries driver [ 3.133230] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.139046] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.144545] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.149723] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.155079] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.160568] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.166217] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.179543] device-mapper: uevent: version 1.0.3 [ 3.180069] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.186473] cpuidle: Initializing cpuidle driver [ 3.190992] sdhci: Secure Digital Host Controller Interface driver [ 3.195125] sdhci: Copyright(c) Pierre Ossman [ 3.199476] Synopsys Designware Multimedia Card Interface Driver [ 3.205437] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.211386] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.212238] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.224929] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.248446] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.258314] vdd-1v0: supplied by regulator-dummy [ 3.263957] vdd-1v8-hs: supplied by regulator-dummy [ 3.268846] vdd-1v8-ls: supplied by regulator-dummy [ 3.273856] vdd-1v8-ao: supplied by regulator-dummy [ 3.277816] vddio-ddr-1v1: supplied by regulator-dummy [ 3.282416] vdd-rtc: supplied by regulator-dummy [ 3.284207] spmic-ldo1: supplied by regulator-dummy [ 3.285706] vdd-ao-3v3: supplied by regulator-dummy [ 3.292016] vddio-emmc-3v3: supplied by regulator-dummy [ 3.298436] spmic-ldo4: supplied by regulator-dummy [ 3.299748] vdd-usb-3v3: supplied by regulator-dummy [ 3.305948] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.312270] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.317953] spmic-ldo8: supplied by vdd-1v8-ls [ 3.319503] gpio-510 (gpio_default): hogged as output/high [ 3.320871] gpio-511 (gpio_default): hogged as output/high [ 3.323853] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.459822] max77686-rtc max77620-rtc: registered as rtc0 [ 3.461198] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.461557] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.259946] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.260948] hid: raw HID events driver (C) Jiri Kosina [ 4.261705] usbcore: registered new interface driver usbhid [ 4.261847] usbhid: USB HID core driver [ 4.263537] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.264652] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.313825] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.389353] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.339 ms) ÿá[ 4.349852] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.350442] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.351270] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.351914] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.353781] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.354379] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.354910] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.356292] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.356656] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.358627] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.366060] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.372422] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.377907] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.383835] denver_knobs_init:MTS_VERSION:55637613 [ 4.396159] t19x_cache tegra-cache: probed [ 4.400275] optee: probing for conduit method. [ 4.401331] optee: revision 3.16 (65cc2218) [ 4.402566] optee: dynamic shared memory is enabled [ 4.404783] optee: initialized driver [ 4.411911] nvpmodel: initialized successfully [ 4.412625] tegra_hv: get_hvd: not initialized yet [ 4.417304] user_ivc_mempool: hypervisor not present [ 4.423223] usbcore: registered new interface driver snd-usb-audio [ 4.429866] u32 classifier [ 4.430750] input device check on [ 4.434471] Actions configured [ 4.438353] Initializing XFRM netlink socket [ 4.443271] NET: Registered protocol family 10 [ 4.449594] Segment Routing with IPv6 [ 4.450350] NET: Registered protocol family 17 [ 4.454869] NET: Registered protocol family 15 [ 4.459084] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.472383] Bluetooth: RFCOMM socket layer initialized [ 4.477566] Bluetooth: RFCOMM ver 1.11 [ 4.481234] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.487313] Bluetooth: HIDP socket layer initialized [ 4.492705] 9pnet: Installing 9P2000 support [ 4.496744] Key type dns_resolver registered [ 4.501950] registered taskstats version 1 [ 4.505242] Loading compiled-in X.509 certificates [ 4.518313] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.520717] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.531460] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.532832] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.541694] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.549809] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.665182] tegra194-pcie 14160000.pcie: Link up [ 4.668174] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.668361] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.668536] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.668857] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.669070] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.669421] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.669989] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.682534] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.683084] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.683575] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.685177] pci 0004:01:00.0: supports D1 D2 [ 4.685395] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.696690] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.697367] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.697582] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.698038] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.698312] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.698625] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.699743] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.707161] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.715905] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.726489] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.730801] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.736158] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.743411] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.752189] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.753907] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.762042] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.770777] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.885656] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.886255] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.886539] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.886696] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.886941] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.887175] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.887533] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.887942] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.901596] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.901850] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.903732] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.904995] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.906428] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.907771] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.908570] pci 0005:00:00.0: Removing from iommu group 7 [ 5.908800] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.940950] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.963282] host1x 13e10000.host1x: initialized [ 5.964830] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.965658] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.966417] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.966991] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.967667] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.968219] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.968912] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.969559] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.979096] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.985877] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.995883] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.002689] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.012721] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.019599] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.029564] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.036815] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.046330] falcon 15340000.vic: Adding to iommu group 17 [ 6.061080] falcon 15340000.vic: initialized [ 6.062006] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.067212] falcon 15380000.nvjpg: initialized [ 6.067750] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.078923] falcon 154c0000.nvenc: initialized [ 6.079607] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.089439] falcon 15a80000.nvenc1: initialized [ 6.090052] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.101661] nvdec 15480000.nvdec: initialized [ 6.102236] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.111496] nvdec 15140000.nvdec1: initialized [ 6.111987] tsec 15500000.tsec: Adding to iommu group 18 [ 6.117746] tsec 15500000.tsec: initialized [ 6.118208] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.126410] tsec 15100000.tsecb: initialized [ 6.129951] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.156437] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.167887] gpio-374 (wifi-enable): hogged as output/high [ 6.168204] gpio-431 (camera-control-output-low): hogged as output/low [ 6.168529] gpio-432 (camera-control-output-low): hogged as output/low [ 6.170452] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.172457] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.173237] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.177699] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.183156] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.189098] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.194722] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.202867] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.210119] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.221574] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.227015] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.232876] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.241778] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.250960] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.258151] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.265779] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.271776] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.281676] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.287967] pva 16000000.pva0: Adding to iommu group 22 [ 6.313377] pva 16000000.pva0: initialized [ 6.318333] pva 16800000.pva1: Adding to iommu group 23 [ 6.335724] pva 16800000.pva1: initialized [ 6.339762] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.352680] nvdla 15880000.nvdla0: initialized [ 6.353909] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.363149] nvdla 158c0000.nvdla1: initialized [ 6.365532] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.365810] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.366091] tegradccommon 15200000.display-hub: dma mapping done [ 6.367866] tegradc 15200000.display: Adding to iommu group 26 [ 6.374972] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.375335] generic_infoframe_type: 0x87 [ 6.375586] tegradc 15200000.display: DT parsed successfully [ 6.375876] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.378006] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.379158] tegradc 15210000.display: Adding to iommu group 26 [ 6.384182] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.398466] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.401893] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.407184] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.407363] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.415797] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.421396] tegra_cec 3960000.tegra_cec: probed [ 6.429610] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.442452] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.442819] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.448255] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.460396] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.462022] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.477775] kfuse 3830000.kfuse: initialized [ 6.482111] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.482213] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.495164] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.495362] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.501889] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.510287] tegradc 15210000.display: disp0 connected to head1->sor [ 6.515256] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.520942] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.534699] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.536924] tegradc 15210000.display: DT parsed successfully [ 6.543777] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.548729] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.558559] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.571633] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.590908] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.591247] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.594953] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.603473] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.612128] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.618712] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.626035] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.633450] usb usb1: Product: xHCI Host Controller [ 6.638387] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.644732] usb usb1: SerialNumber: 3610000.xhci [ 6.650507] hub 1-0:1.0: USB hub found [ 6.653348] hub 1-0:1.0: 4 ports detected [ 6.657539] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.662667] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.670280] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.678132] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.685751] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.693107] usb usb2: Product: xHCI Host Controller [ 6.698062] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.704282] usb usb2: SerialNumber: 3610000.xhci [ 6.709867] hub 2-0:1.0: USB hub found [ 6.712514] hub 2-0:1.0: 4 ports detected [ 6.754121] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.759622] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.760907] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.761168] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.774591] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.775648] tegra194-cpufreq ccplex: probed with BWMGR [ 6.776755] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.777573] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.778033] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.779257] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.788179] mmc0: CQHCI version 5.10 [ 6.789461] tegra194-vi5 15c10000.vi: initialized [ 6.790925] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.792084] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.796646] generic_infoframe_type: 0x87 [ 6.803115] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.806559] tegradc 15200000.display: DT parsed successfully [ 6.814674] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.820486] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.826973] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.836345] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.841581] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.849603] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.849697] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.856190] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.864124] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.864459] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.877105] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.878916] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.886794] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.893152] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.899223] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.900482] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.906495] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.922663] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.933077] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.933205] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.937064] nvethernet 2490000.ethernet: Macsec not supported [ 6.937109] ************************************** [ 6.937112] CPU:0, Error:cbb-noc [ 6.937116] Error Logger : 0 [ 6.937126] ErrLog0 : 0x80030000 [ 6.984510] Transaction Type : RD - Read, Incrementing [ 6.989676] Error Code : SLV [ 6.993088] Error Source : Target [ 6.996847] Error Description : Target error detected by CBB slave [ 7.003239] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 7.010850] Packet header Lock : 0 [ 7.014267] Packet header Len1 : 3 [ 7.018194] NOC protocol version : version >= 2.7 [ 7.023095] ErrLog1 : 0x352420 [ 7.026507] ErrLog2 : 0x0 [ 7.029396] RouteId : 0x352420 [ 7.032463] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 7.037708] Targflow : host1x_p2pm/T/host1x_p2pm [ 7.042521] TargSubRange : 18 [ 7.045499] SeqId : 0 [ 7.048571] ErrLog3 : 0x4045c [ 7.051537] ErrLog4 : 0x0 [ 7.054684] Address accessed : 0x15b4045c [ 7.058970] ErrLog5 : 0x809f851 [ 7.062125] Non-Modify : 0x1 [ 7.065537] AXI ID : 0x10 [ 7.068688] Master ID : CCPLEX [ 7.072013] Security Group(GRPSEC): 0x7e [ 7.076215] Cache : 0x1 -- Bufferable [ 7.080414] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.087496] FALCONSEC : 0x0 [ 7.090644] Virtual Queuing Channel(VQC): 0x0 [ 7.095026] ************************************** [ 7.100064] ------------[ cut here ]------------ [ 7.104821] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.111401] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.116386] Modules linked in: [ 7.119612] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 7.126000] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.138512] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.144552] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.149274] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.153994] sp : ffff800010003b30 [ 7.157408] x29: ffff800010003b30 x28: 0000000000000001 [ 7.162832] x27: 0000000000000005 x26: ffffa0e419a53f58 [ 7.168014] x25: ffffa0e41a3ace10 x24: 0000000000000001 [ 7.173426] x23: ffffa0e419d47000 x22: ffffa0e41a1cea00 [ 7.178762] x21: 000000000000000f x20: ffff38ce00e65280 [ 7.184534] x19: ffffa0e41a1cea00 x18: 0000000000000010 [ 7.189701] x17: ffffa0e419afd008 x16: 000000003d682e3f [ 7.195314] x15: ffffa0e41a042bf0 x14: 0720072007200720 [ 7.200807] x13: 0720072007200720 x12: 0720072007200720 [ 7.206063] x11: 0720072007200720 x10: 0720072007200720 [ 7.211578] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.217347] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.222857] x5 : 0000000000057fa8 x4 : ffffa0e41a057968 [ 7.228039] x3 : 00000000ffffffff x2 : ffffa0e4184ee090 [ 7.233366] x1 : ffffa0e41a042680 x0 : 0000000100010101 [ 7.238957] Call trace: [ 7.241154] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.245445] __handle_irq_event_percpu+0x68/0x2a0 [ 7.250166] handle_irq_event_percpu+0x40/0xa0 [ 7.254454] handle_irq_event+0x50/0xf0 [ 7.258215] handle_fasteoi_irq+0xc0/0x170 [ 7.262241] generic_handle_irq+0x40/0x60 [ 7.266522] __handle_domain_irq+0x70/0xd0 [ 7.270724] efi_header_end+0xb0/0xf0 [ 7.274222] el1_irq+0xd0/0x180 [ 7.276941] __do_softirq+0xb4/0x3e8 [ 7.280617] irq_exit+0xc0/0xe0 [ 7.283847] __handle_domain_irq+0x74/0xd0 [ 7.287871] efi_header_end+0xcc/0xf0 [ 7.291548] el1_irq+0xd0/0x180 [ 7.294270] cpuidle_enter_state+0xb8/0x410 [ 7.298547] cpuidle_enter+0x40/0x60 [ 7.301965] call_cpuidle+0x44/0x80 [ 7.305721] do_idle+0x208/0x270 [ 7.308701] cpu_startup_entry+0x2c/0x70 [ 7.312825] rest_init+0xdc/0xe8 [ 7.316225] arch_call_rest_init+0x18/0x20 [ 7.320423] start_kernel+0x514/0x54c [ 7.323761] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.330229] ---[ end trace a477b2d11e11cc1b ]--- [ 7.334771] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.342039] SMP: stopping secondary CPUs [ 7.346172] Kernel Offset: 0x20e408330000 from 0xffff800010000000 [ 7.352461] PHYS_OFFSET: 0xffffc73300000000 [ 7.356559] CPU features: 0x8240002,03802a30 [ 7.360762] Memory Limit: none [ 7.363918] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 65000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.916] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.955] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.964] I> sdmmc-3 params source = safe params [0001.305] I> sdmmc DDR50 mode [0001.323] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.340] W> Cannot find any partition table for 00000003 [0001.341] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.358] I> Active Boot chain : 0 [0002.029] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.583] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.585] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized noc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized ÿä0ÿâcvc initialized ÿä3:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022 ÿâavfs_clk_platform_post initialized ÿäaaÿâcvc_late initialized regulator_post initialized ÿärch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.205] I> NVDisp-Init version: t194-f9ecfedc [0003.205] I> CPU-BL Params @ 0xca020000 [0003.205] I> 0) Base:0x00000000 Size:0x00000000 [0003.206] I> 1) Base:0xc8300000 Size:0x00100000 [0003.206] I> 2) Base:0xc9800000 Size:0x00200000 [0003.206] I> 3) Base:0xc8600000 Size:0x00200000 [0003.209] I> 4) Base:0xc8200000 Size:0x00100000 [0003.213] I> 5) Base:0xc8100000 Size:0x00100000 [0003.218] I> 6) Base:0xc9400000 Size:0x00400000 [0003.222] I> 7) Base:0xc9000000 Size:0x00400000 [0003.227] I> 8) Base:0xc8000000 Size:0x00100000 [0003.231] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.236] I> 10) Base:0xca800000 Size:0x00800000 [0003.240] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.249] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.258] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.267] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.271] I> 18) Base:0x4004c000 Size:0x00002000 [0003.276] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.280] I> 20) Base:0x4004e000 Size:0x00002000 [0003.285] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.289] I> 22) Base:0x00000000 Size:0x00000000 [0003.294] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.298] I> 24) Base:0xcc000000 Size:0x02000000 [0003.303] I> 25) Base:0x40050000 Size:0x00002000 [0003.307] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.316] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.325] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.329] I> 31) Base:0x00000000 Size:0x00000000 [0003.334] I> 32) Base:0xf8000000 Size:0x08000000 [0003.338] I> 33) Base:0xce000000 Size:0x2a000000 [0003.343] I> 34) Base:0xcb000000 Size:0x01000000 [0003.347] I> 35) Base:0xae000000 Size:0x01000000 [0003.352] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.356] I> 37) Base:0xca000000 Size:0x00800000 [0003.361] I> 38) Base:0x80000000 Size:0x20000000 [0003.365] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.374] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.383] I> 43) Base:0x00000000 Size:0x00000000 [0003.387] I> 44) Base:0x00000000 Size:0x00000000 [0003.392] I> 45) Base:0x00000000 Size:0x00000000 [0003.396] GIC-SPI Target CPU: 0 [0003.399] Interrupts Init done [0003.402] calling constructors [0003.405] initializing heap [0003.408] I> Heap: [0xa0960000 ... 0xadf00000] [0003.412] initializing threads [0003.415] initializing timers [0003.418] creating bootstrap completion thread [0003.422] top of bootstrap2() [0003.425] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.429] initializing platform [0003.432] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.438] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.467] I> fixed regulator driver initialized [0003.481] I> register 'maxim' power off handle [0003.483] I> virtual i2c enabled [0003.484] I> registered 'maxim,max20024' pmic [0003.484] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.486] I> Boot-device: QSPI [0003.489] I> Boot_device: QSPI_FLASH instance: 0 [0003.493] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.504] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.511] I> QSPI source rate = 204000 Khz [0003.514] I> Requested rate for QSPI clock = 34000 Khz [0003.519] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.524] I> tx_clk_tap_delay : 0 [0003.527] I> rx_clk_tap_delay : 16 [0003.530] I> QSPI Flash Size = 32 MB [0003.538] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.543] W> No board IDs available [0003.546] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.559] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.565] E> Failed to publish 00000003 [0003.569] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.589] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> hdmi cable connected [0003.600] W> set volts not configured for 'vdd-1v0' [0003.604] W> set volts not configured for 'vdd-1v8-hs' [0003.605] I> retrieved tmds range from prod_list_hdmi_soc [0003.610] E> invalid display type [0003.611] E> cannot find any other nvdisp nodes [0003.627] I> edid read success [0003.640] I> edid read success [0003.640] I> width = 640, height = 480, frequency = 25174825 [0003.640] I> width = 1920, height = 1080, frequency = 148500000 [0003.641] I> width = 1280, height = 768, frequency = 79500000 [0003.641] I> width = 1360, height = 768, frequency = 85500000 [0003.642] I> width = 720, height = 480, frequency = 26973026 [0003.646] I> width = 720, height = 576, frequency = 26973026 [0003.651] I> width = 1280, height = 720, frequency = 74175824 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.662] I> width = 1920, height = 1080, frequency = 148351648 [0003.668] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 720, height = 480, frequency = 26973026 [0003.679] I> width = 720, height = 576, frequency = 26973026 [0003.685] I> width = 3840, height = 2160, frequency = 296703296 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.696] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 4096, height = 2160, frequency = 296703296 [0003.714] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.725] I> hdmi_enable, starting HDMI initialisation [0003.730] I> hdmi_enable, HDMI initialisation complete [0003.739] initializing target [0003.740] calling apps_init() [0003.740] starting app kernel_boot_app [0003.741] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000090974000-0x00000000a0974000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000596] Console: colour dummy device 80x25 [ 0.001915] printk: console [tty0] enabled [ 0.001984] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002024] pid_max: default: 32768 minimum: 301 [ 0.002248] LSM: Security Framework initializing [ 0.002321] Yama: becoming mindful. [ 0.002377] SELinux: Initializing. [ 0.002565] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002604] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005503] rcu: Hierarchical SRCU implementation. [ 0.005741] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006610] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006662] DTB Build time: Aug 10 2022 20:31:49 [ 0.009550] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009846] Remapping and enabling EFI services. [ 0.011980] smp: Bringing up secondary CPUs ... [ 0.044990] Detected PIPT I-cache on CPU1 [ 0.045084] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074700] Detected PIPT I-cache on CPU2 [ 0.074853] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.104477] Detected PIPT I-cache on CPU3 [ 0.104618] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.134389] Detected PIPT I-cache on CPU4 [ 0.134611] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.164374] Detected PIPT I-cache on CPU5 [ 0.164537] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164883] smp: Brought up 1 node, 6 CPUs [ 0.165050] SMP: Total of 6 processors activated. [ 0.165106] CPU features: detected: Privileged Access Never [ 0.165130] CPU features: detected: LSE atomic instructions [ 0.165142] CPU features: detected: User Access Override [ 0.165156] CPU features: detected: 32-bit EL0 Support [ 0.165168] CPU features: detected: RAS Extension Support [ 0.165179] CPU features: detected: CRC32 instructions [ 0.165190] CPU features: detected: 32-bit EL1 Support [ 0.233806] CPU: All CPU(s) started at EL2 [ 0.239981] devtmpfs: initialized [ 0.285398] Registered cp15_barrier emulation handler [ 0.285526] Registered setend emulation handler [ 0.285546] KASLR enabled [ 0.285834] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.285856] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287120] pinctrl core: initialized pinctrl subsystem [ 0.288046] SMBIOS 3.0.0 present. [ 0.288074] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.288709] NET: Registered protocol family 16 [ 0.290625] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291123] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.291800] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.291853] audit: initializing netlink subsys (disabled) [ 0.292146] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292565] thermal_sys: Registered thermal governor 'step_wise' [ 0.292571] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292586] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295868] cpuidle: using governor menu [ 0.296271] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.296678] ASID allocator initialised with 32768 entries [ 0.296905] Serial: AMBA PL011 UART driver [ 0.300318] Tegra reboot handler registered. [ 0.374112] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.374266] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.374491] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.374536] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.374666] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.374796] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.375035] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.375084] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.375210] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.375276] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.377517] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.377553] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.377581] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.377629] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.377658] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.377685] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.377721] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.377754] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.377780] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.377807] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.377830] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.377854] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.377877] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.377900] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.377926] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.377950] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.377972] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.378066] mc-err: mcerr ops are set to t19x [ 0.390189] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.390211] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.390223] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390234] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.396438] ACPI: Interpreter disabled. [ 0.397698] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.399013] iommu: Default domain type: Translated [ 0.399080] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.399432] SCSI subsystem initialized [ 0.399588] usbcore: registered new interface driver usbfs [ 0.399630] usbcore: registered new interface driver hub [ 0.399663] usbcore: registered new device driver usb [ 0.400071] mc: Linux media interface: v0.10 [ 0.400098] videodev: Linux video capture interface: v2.00 [ 0.400388] pps_core: LinuxPPS API ver. 1 registered [ 0.400401] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.400422] PTP clock support registered [ 0.400631] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.400939] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.401045] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.401658] Registered efivars operations [ 0.407653] FPGA manager framework [ 0.407759] Advanced Linux Sound Architecture Driver Initialized. [ 0.408327] Bluetooth: Core ver 2.22 [ 0.408367] NET: Registered protocol family 31 [ 0.408378] Bluetooth: HCI device and connection manager initialized [ 0.408397] Bluetooth: HCI socket layer initialized [ 0.408413] Bluetooth: L2CAP socket layer initialized [ 0.408435] Bluetooth: SCO socket layer initialized [ 0.409879] camchar: rtcpu character device driver loaded [ 0.410697] clocksource: Switched to clocksource arch_sys_counter [ 0.765664] VFS: Disk quotas dquot_6.6.0 [ 0.765740] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.766081] pnp: PnP ACPI: disabled [ 0.776136] la/ptsa driver initialized. [ 0.776241] NET: Registered protocol family 2 [ 0.776402] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.781063] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.781127] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.781432] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.781862] TCP: Hash tables configured (established 65536 bind 65536) [ 0.782000] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.782088] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.782283] NET: Registered protocol family 1 [ 0.783299] RPC: Registered named UNIX socket transport module. [ 0.783324] RPC: Registered udp transport module. [ 0.783338] RPC: Registered tcp transport module. [ 0.783351] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.783378] PCI: CLS 0 bytes, default 64 [ 0.783700] Trying to unpack rootfs image as initramfs... [ 0.983256] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.985313] Freeing initrd memory: 8196K [ 0.989958] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.990004] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.990042] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.990528] kvm [1]: IPA Size Limit: 40 bits [ 0.991328] kvm [1]: vgic interrupt IRQ9 [ 0.991913] kvm [1]: VHE mode initialized successfully [ 0.993311] Initialise system trusted keyrings [ 0.993601] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.998432] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.999168] NFS: Registering the id_resolver key type [ 0.999195] Key type id_resolver registered [ 0.999205] Key type id_legacy registered [ 0.999277] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.999296] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.999323] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.009677] NET: Registered protocol family 38 [ 1.009697] Key type asymmetric registered [ 1.009708] Asymmetric key parser 'x509' registered [ 1.009754] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.009932] io scheduler mq-deadline registered [ 1.009945] io scheduler kyber registered [ 1.014764] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.017171] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.017234] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.017284] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.017338] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.017388] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.022079] scrncapt: init (heads:4 wins:6 planes:4) [ 1.022504] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.023540] EINJ: ACPI disabled. [ 1.026016] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.026038] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.026049] tegra-pmc: ### PMC reset level: L1 [ 1.026058] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.026101] tegra-pmc: PMC Prod config success [ 1.030812] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.514484] random: fast init done [ 2.581221] printk: console [ttyTCU0] enabled [ 2.586820] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.591848] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.596663] arm-smmu 10000000.iommu: stage 1 translation [ 2.601908] arm-smmu 10000000.iommu: stage 2 translation [ 2.607419] arm-smmu 10000000.iommu: nested translation [ 2.613016] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.620194] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.630223] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.633328] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.639891] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.647598] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.652940] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.657903] arm-smmu 12000000.iommu: stage 1 translation [ 2.663428] arm-smmu 12000000.iommu: stage 2 translation [ 2.668847] arm-smmu 12000000.iommu: nested translation [ 2.674007] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.681444] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.691361] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.694309] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.700882] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.708438] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.717788] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.721511] tegra_profiler: auth: init [ 2.725450] THERMAL EST: found 3 subdevs [ 2.729223] THERMAL EST num_resources: 0 [ 2.732806] [THERMAL EST subdev 0] [ 2.736129] [THERMAL EST subdev 1] [ 2.739805] [THERMAL EST subdev 2] [ 2.742787] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.749163] THERMAL EST: thz register success. [ 2.753480] THERMAL EST: end of probe, return err: 0 [ 2.758955] nvsciipc: loaded module [ 2.765194] tun: Universal TUN/TAP device driver, 1.6 [ 2.768388] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.774830] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.780371] e1000e: Intel(R) PRO/1000 Network Driver [ 2.785297] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.791131] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.796678] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.802832] PPP generic driver version 2.4.2 [ 2.806856] PPP BSD Compression module registered [ 2.811392] PPP Deflate Compression module registered [ 2.816897] PPP MPPE Compression module registered [ 2.821655] usbcore: registered new interface driver r8152 [ 2.827154] usbcore: registered new interface driver asix [ 2.832489] usbcore: registered new interface driver ax88179_178a [ 2.838630] usbcore: registered new interface driver cdc_ether [ 2.844818] usbcore: registered new interface driver net1080 [ 2.850427] usbcore: registered new interface driver cdc_subset [ 2.856529] usbcore: registered new interface driver zaurus [ 2.862176] usbcore: registered new interface driver cdc_ncm [ 2.867836] usbcore: registered new interface driver aqc111 [ 2.873473] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.879572] ohci-pci: OHCI PCI platform driver [ 2.883589] ohci-platform: OHCI generic platform driver [ 2.889658] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.895759] usbcore: registered new interface driver uas [ 2.899909] usbcore: registered new interface driver usb-storage [ 2.906255] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.912150] mousedev: PS/2 mouse device common for all mice [ 2.917061] usbcore: registered new interface driver xpad [ 2.924885] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.927797] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.935855] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.942361] i2c /dev entries driver [ 2.945677] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.951168] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.956565] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.962212] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.967515] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.973008] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.978198] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.989786] device-mapper: uevent: version 1.0.3 [ 2.990160] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.998267] cpuidle: Initializing cpuidle driver [ 3.002758] sdhci: Secure Digital Host Controller Interface driver [ 3.007389] sdhci: Copyright(c) Pierre Ossman [ 3.011770] Synopsys Designware Multimedia Card Interface Driver [ 3.017630] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.023707] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.024278] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.036782] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.055455] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.064067] vdd-1v0: supplied by regulator-dummy [ 3.069468] vdd-1v8-hs: supplied by regulator-dummy [ 3.074184] vdd-1v8-ls: supplied by regulator-dummy [ 3.078945] vdd-1v8-ao: supplied by regulator-dummy [ 3.082810] vddio-ddr-1v1: supplied by regulator-dummy [ 3.087126] vdd-rtc: supplied by regulator-dummy [ 3.088756] spmic-ldo1: supplied by regulator-dummy [ 3.089916] vdd-ao-3v3: supplied by regulator-dummy [ 3.095966] vddio-emmc-3v3: supplied by regulator-dummy [ 3.102115] spmic-ldo4: supplied by regulator-dummy [ 3.103326] vdd-usb-3v3: supplied by regulator-dummy [ 3.109443] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.115477] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.120876] spmic-ldo8: supplied by vdd-1v8-ls [ 3.122178] gpio-510 (gpio_default): hogged as output/high [ 3.123947] gpio-511 (gpio_default): hogged as output/high [ 3.130820] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.268780] max77686-rtc max77620-rtc: registered as rtc0 [ 3.269705] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.269966] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.979177] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.980123] hid: raw HID events driver (C) Jiri Kosina [ 3.980770] usbcore: registered new interface driver usbhid [ 3.980910] usbhid: USB HID core driver [ 3.982739] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.983812] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.746561] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.822173] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.422 ms) ÿá[ 4.068904] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.069465] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.070591] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.071544] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.073190] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.073871] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.074487] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.075747] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.076141] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.078039] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.085288] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.092070] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.097368] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.104094] denver_knobs_init:MTS_VERSION:55637613 [ 4.116193] t19x_cache tegra-cache: probed [ 4.119210] optee: probing for conduit method. [ 4.120194] optee: revision 3.16 (65cc2218) [ 4.121705] optee: dynamic shared memory is enabled [ 4.124142] optee: initialized driver [ 4.130260] nvpmodel: initialized successfully [ 4.131815] tegra_hv: get_hvd: not initialized yet [ 4.136492] user_ivc_mempool: hypervisor not present [ 4.142609] usbcore: registered new interface driver snd-usb-audio [ 4.148524] u32 classifier [ 4.150233] input device check on [ 4.154065] Actions configured [ 4.157296] Initializing XFRM netlink socket [ 4.162209] NET: Registered protocol family 10 [ 4.168318] Segment Routing with IPv6 [ 4.169559] NET: Registered protocol family 17 [ 4.173871] NET: Registered protocol family 15 [ 4.178488] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.191651] Bluetooth: RFCOMM socket layer initialized [ 4.196789] Bluetooth: RFCOMM ver 1.11 [ 4.200448] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.206306] Bluetooth: HIDP socket layer initialized [ 4.212478] 9pnet: Installing 9P2000 support [ 4.215723] Key type dns_resolver registered [ 4.221144] registered taskstats version 1 [ 4.224444] Loading compiled-in X.509 certificates [ 4.237067] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.239978] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.250005] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.252127] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.260899] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.269128] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.386719] tegra194-pcie 14160000.pcie: Link up [ 4.389573] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.389806] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.389956] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.390192] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.390412] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.390849] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.391302] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.403336] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.403808] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.404258] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.405787] pci 0004:01:00.0: supports D1 D2 [ 4.405944] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.414939] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.415328] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.415652] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.416036] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.416329] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.416540] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.421608] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.428709] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.437631] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.447255] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.452179] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.457920] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.464382] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.473656] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.475464] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.483622] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.492430] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.598804] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.599469] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.599727] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.599894] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.600191] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.600458] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.600912] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.601343] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.615612] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.615977] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.617740] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.619262] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.620943] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.622349] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.623331] pci 0005:00:00.0: Removing from iommu group 7 [ 5.623612] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.652863] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.672856] host1x 13e10000.host1x: initialized [ 5.674261] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.675232] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.676381] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.677054] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.678080] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.678871] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.679842] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.682300] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.691964] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.699040] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.708872] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.715804] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.725780] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.733260] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.743169] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.750166] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.759756] falcon 15340000.vic: Adding to iommu group 17 [ 5.773989] falcon 15340000.vic: initialized [ 5.774953] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.781046] falcon 15380000.nvjpg: initialized [ 5.781873] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.793359] falcon 154c0000.nvenc: initialized [ 5.794114] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.802417] falcon 15a80000.nvenc1: initialized [ 5.803189] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.815032] nvdec 15480000.nvdec: initialized [ 5.815775] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.825444] nvdec 15140000.nvdec1: initialized [ 5.826022] tsec 15500000.tsec: Adding to iommu group 18 [ 5.832608] tsec 15500000.tsec: initialized [ 5.833097] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.840302] tsec 15100000.tsecb: initialized [ 5.844206] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.868017] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.878612] gpio-374 (wifi-enable): hogged as output/high [ 5.879192] gpio-431 (camera-control-output-low): hogged as output/low [ 5.879519] gpio-432 (camera-control-output-low): hogged as output/low [ 5.881159] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.882914] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.884457] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.890841] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.896445] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.902220] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.907691] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.915777] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.923520] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.934599] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.940080] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.945870] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.954690] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.964194] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.971394] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.979200] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.985248] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.994983] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.000899] pva 16000000.pva0: Adding to iommu group 22 [ 6.027436] pva 16000000.pva0: initialized [ 6.032473] pva 16800000.pva1: Adding to iommu group 23 [ 6.043698] pva 16800000.pva1: initialized [ 6.047949] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.060005] nvdla 15880000.nvdla0: initialized [ 6.061247] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.069798] nvdla 158c0000.nvdla1: initialized [ 6.072840] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.073107] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.073403] tegradccommon 15200000.display-hub: dma mapping done [ 6.074433] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.074519] tegradc 15200000.display: Adding to iommu group 26 [ 6.074527] tegradc 15210000.display: Adding to iommu group 26 [ 6.074773] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.083113] tegradc 15210000.display: disp0 connected to head1->sor [ 6.085541] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.091047] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.097257] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.103918] tegradc 15210000.display: DT parsed successfully [ 6.110302] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.115483] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.121126] tegra_cec 3960000.tegra_cec: probed [ 6.129667] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.134794] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.140438] generic_infoframe_type: 0x87 [ 6.148276] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.149945] tegradc 15200000.display: DT parsed successfully [ 6.156904] kfuse 3830000.kfuse: initialized [ 6.162232] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.167489] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.181455] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.188907] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.189082] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.196253] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.202978] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.210295] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.221009] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.233926] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.234403] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.239125] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.254064] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.255490] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.271516] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.280819] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.288475] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.293327] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.303518] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.308754] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.317337] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.325801] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.332272] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.339930] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.347268] usb usb1: Product: xHCI Host Controller [ 6.351947] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.358119] usb usb1: SerialNumber: 3610000.xhci [ 6.364198] hub 1-0:1.0: USB hub found [ 6.366982] hub 1-0:1.0: 4 ports detected [ 6.371353] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.376085] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.383707] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.391374] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.399263] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.406531] usb usb2: Product: xHCI Host Controller [ 6.411771] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.417951] usb usb2: SerialNumber: 3610000.xhci [ 6.423874] hub 2-0:1.0: USB hub found [ 6.426145] hub 2-0:1.0: 4 ports detected [ 6.466956] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.472466] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.473785] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.474080] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.487567] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.488607] tegra194-cpufreq ccplex: probed with BWMGR [ 6.489915] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.490779] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.491236] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.492679] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.501369] mmc0: CQHCI version 5.10 [ 6.503860] tegra194-vi5 15c10000.vi: initialized [ 6.505129] tegradc 15210000.display: disp0 connected to head1->sor [ 6.506372] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.509916] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.516499] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.523628] tegradc 15210000.display: DT parsed successfully [ 6.531559] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.536982] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.543382] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.551284] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.557898] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.564758] generic_infoframe_type: 0x87 [ 6.570906] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.574885] tegradc 15200000.display: DT parsed successfully [ 6.586690] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.587299] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.593831] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.593839] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.594400] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.608560] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.617244] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.623234] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.623238] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.630679] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.655506] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.667857] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.668059] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.674435] nvethernet 2490000.ethernet: Macsec not supported [ 6.692003] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.692390] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.698431] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.707276] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.716378] tegradc 15200000.display: probed [ 6.719962] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.731505] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.739932] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.746486] tegra-se-nvhost 15810000.se: initialized [ 6.754556] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.755867] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.762666] tegra-se-nvhost 15820000.se: initialized [ 6.768737] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.773273] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.779348] Console: switching to colour frame buffer device 240x67 [ 6.779716] tegra-se-nvhost 15830000.se: initialized [ 6.785190] tegradc 15200000.display: fb registered [ 6.785275] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.791678] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.807614] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.807875] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.819111] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.819757] tegra-se-nvhost 15840000.se: initialized [ 6.831468] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.837785] tegra_actmon d230000.actmon: in actmon_register()... [ 6.842242] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.848291] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.856317] hvc_sysfs: hypervisor is not present [ 6.860209] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 6.868685] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.875867] usb 1-2: Product: 4-Port USB 2.0 Hub [ 6.882668] usb 1-2: Manufacturer: Generic [ 6.886496] hub 1-2:1.0: USB hub found [ 6.888835] ALSA device list: [ 6.889391] hub 1-2:1.0: 4 ports detected [ 6.891424] No soundcards found. [ 6.896721] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 6.901067] mmc0: Command Queue Engine enabled [ 6.909099] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 6.912539] mmc0: periodic cache flush enabled [ 6.920104] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.920874] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.924823] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.932261] Extcon AUX1(HDMI) enable [ 6.932384] tegradc 15210000.display: disp1 connected to head1->sor [ 6.941168] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.946272] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.949559] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.955584] tegradc 15210000.display: DT parsed successfully [ 6.971349] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.974474] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.974530] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.974737] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 6.974744] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 6.981808] tegradc 15210000.display: probed [ 7.021305] tegradc 15210000.display: fb registered [ 7.029065] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.032852] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.034584] Freeing unused kernel memory: 3968K [ 7.041023] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.050949] tegradc 15210000.display: blank - powerdown [ 7.056200] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.064781] Extcon DP: HPD disabled [ 7.068480] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.068576] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.074864] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.083085] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.086889] Run /init as init process [ 7.088874] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.096376] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.096381] usb 2-3: Manufacturer: Generic ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.123651] tegradc 15200000.display: blank - powerdown [ 7.134717] hub 2-3:1.0: USB hub found [ 7.136789] hub 2-3:1.0: 4 ports detected [ 7.138720] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.163824] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.163830] Extcon AUX1(HDMI) disable [ 7.166658] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.170447] Root device found: mmcblk0p1 [ 7.172413] Found dev node: /dev/mmcblk0p1 [ 7.187535] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.188459] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.201206] tegradc 15200000.display: unblank [ 7.202277] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.202468] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.203284] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.203290] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.208020] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.208674] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.210568] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.212094] Rootfs mounted over mmcblk0p1 [ 7.214663] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.214668] Extcon AUX1(HDMI) enable [ 7.227328] tegradc 15200000.display: sync windows ret = 247 [ 7.241625] Switching from initrd to actual rootfs [ 7.273613] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.280648] Extcon HDMI: HPD enabled [ 7.284337] tegradc 15200000.display: hdmi: plugged [ 7.319934] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.321295] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.322608] usb 1-3: Product: Bluetooth Radio [ 7.323865] usb 1-3: Manufacturer: Realtek [ 7.325085] usb 1-3: SerialNumber: 00e04c000001 [ 7.424151] systemd[1]: System time before build time, advancing clock. [ 7.494882] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.499677] systemd[1]: Detected architecture arm64. [ 7.539014] systemd[1]: Set hostname to . [ 7.714334] systemd-sysv-generator[253]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.072248] random: systemd: uninitialized urandom read (16 bytes read) [ 8.073976] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.075663] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.081240] systemd[1]: Created slice system-modprobe.slice. [ 8.084905] random: systemd: uninitialized urandom read (16 bytes read) [ 8.087539] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.090584] random: systemd: uninitialized urandom read (16 bytes read) [ 8.093105] systemd[1]: Created slice User and Session Slice. [ 8.096523] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.100599] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.104031] systemd[1]: Reached target User and Group Name Lookups. [ 8.107130] systemd[1]: Reached target Slices. [ 8.110092] systemd[1]: Reached target Swap. [ 8.114061] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.117642] systemd[1]: Listening on Syslog Socket. [ 8.121122] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.124440] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.128631] systemd[1]: Listening on Journal Audit Socket. [ 8.132171] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.135827] systemd[1]: Listening on Journal Socket. [ 8.139438] systemd[1]: Listening on udev Control Socket. [ 8.142886] systemd[1]: Listening on udev Kernel Socket. [ 8.151227] systemd[1]: Mounting Huge Pages File System... [ 8.159448] systemd[1]: Mounting POSIX Message Queue File System... [ 8.167324] systemd[1]: Mounting RPC Pipe File System... [ 8.175798] systemd[1]: Mounting Kernel Debug File System... [ 8.184263] systemd[1]: Mounting Kernel Trace File System... [ 8.197130] systemd[1]: Starting Journal Service... [ 8.205919] systemd[1]: Starting Set the console keyboard layout... [ 8.214128] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.217546] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.224065] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.231883] systemd[1]: Started Nameserver information manager. [ 8.236432] systemd[1]: Reached target Network (Pre). [ 8.243784] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.245950] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.255625] systemd[1]: Starting Load Kernel Modules... [ 8.263792] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.271605] systemd[1]: Starting udev Coldplug all Devices... [ 8.282868] systemd[1]: Mounted Huge Pages File System. [ 8.286500] systemd[1]: Mounted POSIX Message Queue File System. [ 8.290781] systemd[1]: Mounted RPC Pipe File System. [ 8.291971] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.297832] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.298369] systemd[1]: Mounted Kernel Debug File System. [ 8.300115] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.302109] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.302123] nvmap_page_pool_init: Total RAM pages: 1752674 [ 8.302128] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.302386] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.303764] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.313917] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.313933] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.330262] systemd[1]: Mounted Kernel Trace File System. [ 8.339805] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.346056] systemd[1]: nvfb-udev.service: Succeeded. [ 8.351162] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.363932] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.368902] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.370984] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.384267] systemd[1]: Starting Load/Save Random Seed... [ 8.393334] systemd[1]: Starting Create System Users... [ 8.434493] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.434493] [ 8.461553] systemd[1]: Finished Set the console keyboard layout. [ 8.468456] systemd[1]: Finished Load Kernel Modules. [ 8.474766] systemd[1]: Finished Create System Users. [ 8.479102] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.485231] systemd[1]: Mounting Kernel Configuration File System... [ 8.493221] systemd[1]: Started OP-TEE Client Supplicant. [ 8.501302] systemd[1]: Starting Apply Kernel Variables... [ 8.508764] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.519583] systemd[1]: Mounted Kernel Configuration File System. [ 9.886685] random: crng init done [ 9.887939] random: 7 urandom warning(s) missed due to ratelimiting [ 9.936590] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.955804] imx219 9-0010: board setup failed [ 9.957187] imx219: probe of 9-0010 failed with error -121 [ 9.976285] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 9.988799] imx219 10-0010: board setup failed [ 9.990826] imx219: probe of 10-0010 failed with error -121 [ 10.013240] hot-surface-alert cooling state: 0 -> 1 [ 10.874031] using random self ethernet address [ 10.906670] using random host ethernet address [ 11.692275] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.692282] Creating 1 MTD partitions on "spi6.0": [ 11.692291] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.270547] using random self ethernet address [ 12.270554] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.824104] nvidia: loading out-of-tree module taints kernel. [ 58.480156] watchdog: watchdog0: watchdog did not stop! [ 58.931827] Trying to unregister non-registered hwtime source [ 61.993020] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.994526] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 65000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.310] I> sdmmc DDR50 mode [0001.328] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.345] W> Cannot find any partition table for 00000003 [0001.346] > PARTITION_MANAGER: Failed to publish partition. [0001.362] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.363] I> Active Boot chain : 0 [0002.034] I> Relocating BR-BCT [0002.036] > DEVICE_PROD: device prod is not initialized. [0002.341] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.342] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.343] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.343] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.344] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.344] I> dram_block larger than 80000000 [0002.347] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.358] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.361] I> found decompressor handler: lz4 [0002.590] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.591] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.210] I> Welcome to NVDisp-Init [0003.210] I> NVDisp-Init version: t194-f9ecfedc [0003.211] I> CPU-BL Params @ 0xca020000 [0003.211] I> 0) Base:0x00000000 Size:0x00000000 [0003.211] I> 1) Base:0xc8300000 Size:0x00100000 [0003.212] I> 2) Base:0xc9800000 Size:0x00200000 [0003.212] I> 3) Base:0xc8600000 Size:0x00200000 [0003.214] I> 4) Base:0xc8200000 Size:0x00100000 [0003.219] I> 5) Base:0xc8100000 Size:0x00100000 [0003.223] I> 6) Base:0xc9400000 Size:0x00400000 [0003.228] I> 7) Base:0xc9000000 Size:0x00400000 [0003.232] I> 8) Base:0xc8000000 Size:0x00100000 [0003.237] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.241] I> 10) Base:0xca800000 Size:0x00800000 [0003.246] I> 11) Base:0x40000000 Size:0x00040000 [0003.250] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.255] I> 13) Base:0x40046000 Size:0x00002000 [0003.259] I> 14) Base:0x40048000 Size:0x00002000 [0003.264] I> 15) Base:0xaf000000 Size:0x00004000 [0003.268] I> 16) Base:0x4004a000 Size:0x00002000 [0003.272] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.277] I> 18) Base:0x4004c000 Size:0x00002000 [0003.281] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.286] I> 20) Base:0x4004e000 Size:0x00002000 [0003.290] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.295] I> 22) Base:0x00000000 Size:0x00000000 [0003.299] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.304] I> 24) Base:0xcc000000 Size:0x02000000 [0003.308] I> 25) Base:0x40050000 Size:0x00002000 [0003.313] I> 26) Base:0x40040000 Size:0x00006000 [0003.317] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.322] I> 28) Base:0xc8400000 Size:0x00200000 [0003.326] I> 29) Base:0xc8800000 Size:0x00400000 [0003.331] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.335] I> 31) Base:0x00000000 Size:0x00000000 [0003.339] I> 32) Base:0xf8000000 Size:0x08000000 [0003.344] I> 33) Base:0xce000000 Size:0x2a000000 [0003.348] I> 34) Base:0xcb000000 Size:0x01000000 [0003.353] I> 35) Base:0xae000000 Size:0x01000000 [0003.357] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.362] I> 37) Base:0xca000000 Size:0x00800000 [0003.366] I> 38) Base:0x80000000 Size:0x20000000 [0003.371] I> 39) Base:0xb0000000 Size:0x08000000 [0003.375] I> 40) Base:0x00000000 Size:0x00000000 [0003.380] I> 41) Base:0x00000000 Size:0x00000000 [0003.384] I> 42) Base:0x00000000 Size:0x00000000 [0003.389] I> 43) Base:0x00000000 Size:0x00000000 [0003.393] I> 44) Base:0x00000000 Size:0x00000000 [0003.397] I> 45) Base:0x00000000 Size:0x00000000 [0003.402] GIC-SPI Target CPU: 0 [0003.405] Interrupts Init done [0003.408] calling constructors [0003.411] initializing heap [0003.413] I> Heap: [0xa0960000 ... 0xadf00000] [0003.418] initializing threads [0003.420] initializing timers [0003.423] creating bootstrap completion thread [0003.428] top of bootstrap2() [0003.430] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.435] initializing platform [0003.438] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.443] W> device prod register failed [0003.447] I> Bl_dtb @0xadf00000 [0003.450] I> gpio framework initialized [0003.462] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.468] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.472] I> fixed regulator driver initialized [0003.488] I> register 'maxim' power off handle [0003.490] I> virtual i2c enabled [0003.491] I> registered 'maxim,max20024' pmic [0003.491] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.492] I> Boot-device: QSPI [0003.494] I> Boot_device: QSPI_FLASH instance: 0 [0003.499] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.509] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.517] I> QSPI source rate = 204000 Khz [0003.520] I> Requested rate for QSPI clock = 34000 Khz [0003.525] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.530] I> tx_clk_tap_delay : 0 [0003.533] I> rx_clk_tap_delay : 16 [0003.536] I> QSPI Flash Size = 32 MB [0003.544] I> Qspi initialized successfully [0003.544] I> qspi flash-0 params source = boot args [0003.549] W> No board IDs available [0003.551] E> Failed to get board id info! [0003.557] I> sdmmc-3 params source = safe params [0003.564] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.565] W> Cannot find any partition table for 00000003 [0003.570] E> Failed to publish 00000003 [0003.575] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.596] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> regulator 'vdd-hdmi-5v0' already enabled [0003.602] I> hdmi cable connected [0003.607] W> set volts not configured for 'vdd-1v0' [0003.613] W> set volts not configured for 'vdd-1v8-hs' [0003.613] I> retrieved tmds range from prod_list_hdmi_soc [0003.618] E> invalid display type [0003.619] E> cannot find any other nvdisp nodes [0003.636] I> edid read success [0003.648] I> edid read success [0003.649] I> width = 640, height = 480, frequency = 25174825 [0003.649] I> width = 1920, height = 1080, frequency = 148500000 [0003.649] I> width = 1280, height = 768, frequency = 79500000 [0003.650] I> width = 1360, height = 768, frequency = 85500000 [0003.650] I> width = 720, height = 480, frequency = 26973026 [0003.654] I> width = 720, height = 576, frequency = 26973026 [0003.660] I> width = 1280, height = 720, frequency = 74175824 [0003.665] I> width = 1280, height = 720, frequency = 74175824 [0003.671] I> width = 1920, height = 1080, frequency = 148351648 [0003.677] I> width = 1920, height = 1080, frequency = 148351648 [0003.682] I> width = 720, height = 480, frequency = 26973026 [0003.688] I> width = 720, height = 576, frequency = 26973026 [0003.693] I> width = 3840, height = 2160, frequency = 296703296 [0003.699] I> width = 3840, height = 2160, frequency = 296703296 [0003.705] I> width = 3840, height = 2160, frequency = 296703296 [0003.711] I> width = 3840, height = 2160, frequency = 296703296 [0003.717] I> width = 4096, height = 2160, frequency = 296703296 [0003.722] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.734] I> hdmi_enable, starting HDMI initialisation [0003.738] I> hdmi_enable, HDMI initialisation complete [0003.748] initializing target [0003.748] calling apps_init() [0003.749] starting app kernel_boot_app [0003.750] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932988K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475328K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000695] Console: colour dummy device 80x25 [ 0.002256] printk: console [tty0] enabled [ 0.002333] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002369] pid_max: default: 32768 minimum: 301 [ 0.002564] LSM: Security Framework initializing [ 0.002624] Yama: becoming mindful. [ 0.002673] SELinux: Initializing. [ 0.002849] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002889] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005759] rcu: Hierarchical SRCU implementation. [ 0.006025] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006875] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006924] DTB Build time: Aug 10 2022 20:31:49 [ 0.009862] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010112] Remapping and enabling EFI services. [ 0.012136] smp: Bringing up secondary CPUs ... [ 0.042382] Detected PIPT I-cache on CPU1 [ 0.042473] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.076209] Detected PIPT I-cache on CPU2 [ 0.076361] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.105934] Detected PIPT I-cache on CPU3 [ 0.106073] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.135795] Detected PIPT I-cache on CPU4 [ 0.136006] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.165660] Detected PIPT I-cache on CPU5 [ 0.165792] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.166147] smp: Brought up 1 node, 6 CPUs [ 0.166422] SMP: Total of 6 processors activated. [ 0.166487] CPU features: detected: Privileged Access Never [ 0.166513] CPU features: detected: LSE atomic instructions [ 0.166528] CPU features: detected: User Access Override [ 0.166542] CPU features: detected: 32-bit EL0 Support [ 0.166555] CPU features: detected: RAS Extension Support [ 0.166568] CPU features: detected: CRC32 instructions [ 0.166582] CPU features: detected: 32-bit EL1 Support [ 0.234502] CPU: All CPU(s) started at EL2 [ 0.241090] devtmpfs: initialized [ 0.289693] Registered cp15_barrier emulation handler [ 0.289835] Registered setend emulation handler [ 0.289857] KASLR enabled [ 0.290103] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.290149] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291434] pinctrl core: initialized pinctrl subsystem [ 0.292384] SMBIOS 3.0.0 present. [ 0.292416] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.292998] NET: Registered protocol family 16 [ 0.294878] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295390] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296099] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296163] audit: initializing netlink subsys (disabled) [ 0.296463] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.296924] thermal_sys: Registered thermal governor 'step_wise' [ 0.296931] thermal_sys: Registered thermal governor 'power_allocator' [ 0.296949] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.298936] cpuidle: using governor menu [ 0.299295] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.299732] ASID allocator initialised with 32768 entries [ 0.299963] Serial: AMBA PL011 UART driver [ 0.303339] Tegra reboot handler registered. [ 0.373144] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.373301] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.373488] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.373537] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.373694] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.373738] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.373864] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.373905] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.374037] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.374080] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.376377] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.376430] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.376461] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.376507] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.376552] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.376581] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.376620] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.376653] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.376679] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.376705] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.376729] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.376759] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.376782] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.376805] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.376827] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.376849] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.376922] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.377031] mc-err: mcerr ops are set to t19x [ 0.389792] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.389815] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.389827] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.389843] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.396721] ACPI: Interpreter disabled. [ 0.398541] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.400611] iommu: Default domain type: Translated [ 0.400708] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.401196] SCSI subsystem initialized [ 0.401426] usbcore: registered new interface driver usbfs [ 0.401521] usbcore: registered new interface driver hub [ 0.401574] usbcore: registered new device driver usb [ 0.402147] mc: Linux media interface: v0.10 [ 0.402195] videodev: Linux video capture interface: v2.00 [ 0.402663] pps_core: LinuxPPS API ver. 1 registered [ 0.402679] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.402708] PTP clock support registered [ 0.403054] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.403470] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.403641] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.404641] Registered efivars operations [ 0.412291] FPGA manager framework [ 0.412459] Advanced Linux Sound Architecture Driver Initialized. [ 0.413286] Bluetooth: Core ver 2.22 [ 0.413355] NET: Registered protocol family 31 [ 0.413374] Bluetooth: HCI device and connection manager initialized [ 0.413398] Bluetooth: HCI socket layer initialized [ 0.413418] Bluetooth: L2CAP socket layer initialized [ 0.413464] Bluetooth: SCO socket layer initialized [ 0.415594] camchar: rtcpu character device driver loaded [ 0.416691] clocksource: Switched to clocksource arch_sys_counter [ 0.878360] VFS: Disk quotas dquot_6.6.0 [ 0.878464] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.878997] pnp: PnP ACPI: disabled [ 0.893634] la/ptsa driver initialized. [ 0.893809] NET: Registered protocol family 2 [ 0.894065] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.902963] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.903083] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.903437] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.904055] TCP: Hash tables configured (established 65536 bind 65536) [ 0.904243] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.904406] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.904742] NET: Registered protocol family 1 [ 0.905632] RPC: Registered named UNIX socket transport module. [ 0.905670] RPC: Registered udp transport module. [ 0.905692] RPC: Registered tcp transport module. [ 0.905712] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.905743] PCI: CLS 0 bytes, default 64 [ 0.906034] Trying to unpack rootfs image as initramfs... [ 1.176174] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.179390] Freeing initrd memory: 8196K [ 1.183708] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.183772] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.183819] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.184153] kvm [1]: IPA Size Limit: 40 bits [ 1.184736] kvm [1]: vgic interrupt IRQ9 [ 1.185335] kvm [1]: VHE mode initialized successfully [ 1.187022] Initialise system trusted keyrings [ 1.187347] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.194551] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.195522] NFS: Registering the id_resolver key type [ 1.195589] Key type id_resolver registered [ 1.195607] Key type id_legacy registered [ 1.195724] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.195748] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.195810] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.207620] NET: Registered protocol family 38 [ 1.207646] Key type asymmetric registered [ 1.207662] Asymmetric key parser 'x509' registered [ 1.207711] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.208036] io scheduler mq-deadline registered [ 1.208055] io scheduler kyber registered [ 1.214625] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.217633] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.217713] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.217785] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.217854] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.217949] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.223509] scrncapt: init (heads:4 wins:6 planes:4) [ 1.223742] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.224853] EINJ: ACPI disabled. [ 1.228398] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.228424] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.228439] tegra-pmc: ### PMC reset level: L1 [ 1.228452] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.228523] tegra-pmc: PMC Prod config success [ 1.234138] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.251079] random: fast init done [ 1.251665] printk: console [ttyTCU0] enabled [ 2.791880] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.796406] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.800903] arm-smmu 10000000.iommu: stage 1 translation [ 2.806666] arm-smmu 10000000.iommu: stage 2 translation [ 2.811948] arm-smmu 10000000.iommu: nested translation [ 2.817551] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.824699] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.835509] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.837571] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.844380] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.851907] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.857173] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.861890] arm-smmu 12000000.iommu: stage 1 translation [ 2.867651] arm-smmu 12000000.iommu: stage 2 translation [ 2.872825] arm-smmu 12000000.iommu: nested translation [ 2.878515] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.885686] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.896365] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.898809] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.905111] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.912765] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.922225] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.925512] tegra_profiler: auth: init [ 2.930017] THERMAL EST: found 3 subdevs [ 2.933206] THERMAL EST num_resources: 0 [ 2.937344] [THERMAL EST subdev 0] [ 2.940352] [THERMAL EST subdev 1] [ 2.944042] [THERMAL EST subdev 2] [ 2.947057] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.953493] THERMAL EST: thz register success. [ 2.957726] THERMAL EST: end of probe, return err: 0 [ 2.963290] nvsciipc: loaded module [ 2.970294] tun: Universal TUN/TAP device driver, 1.6 [ 2.972502] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.979098] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.984360] e1000e: Intel(R) PRO/1000 Network Driver [ 2.989547] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.995616] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.000927] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.007105] PPP generic driver version 2.4.2 [ 3.011343] PPP BSD Compression module registered [ 3.015889] PPP Deflate Compression module registered [ 3.021138] PPP MPPE Compression module registered [ 3.025903] usbcore: registered new interface driver r8152 [ 3.031660] usbcore: registered new interface driver asix [ 3.036735] usbcore: registered new interface driver ax88179_178a [ 3.042860] usbcore: registered new interface driver cdc_ether [ 3.049067] usbcore: registered new interface driver net1080 [ 3.054673] usbcore: registered new interface driver cdc_subset [ 3.060448] usbcore: registered new interface driver zaurus [ 3.066152] usbcore: registered new interface driver cdc_ncm [ 3.072078] usbcore: registered new interface driver aqc111 [ 3.077728] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.083554] ohci-pci: OHCI PCI platform driver [ 3.088121] ohci-platform: OHCI generic platform driver [ 3.093962] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.099888] usbcore: registered new interface driver uas [ 3.104166] usbcore: registered new interface driver usb-storage [ 3.110549] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.116511] mousedev: PS/2 mouse device common for all mice [ 3.121546] usbcore: registered new interface driver xpad [ 3.129588] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.132258] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.140083] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.146397] i2c /dev entries driver [ 3.149724] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.155465] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.160838] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.166264] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.171527] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.177039] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.182746] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.195723] device-mapper: uevent: version 1.0.3 [ 3.196171] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.202881] cpuidle: Initializing cpuidle driver [ 3.206849] sdhci: Secure Digital Host Controller Interface driver [ 3.211638] sdhci: Copyright(c) Pierre Ossman [ 3.215991] Synopsys Designware Multimedia Card Interface Driver [ 3.222178] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.227895] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.228702] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.241452] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.263169] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.272958] vdd-1v0: supplied by regulator-dummy [ 3.278453] vdd-1v8-hs: supplied by regulator-dummy [ 3.283261] vdd-1v8-ls: supplied by regulator-dummy [ 3.288063] vdd-1v8-ao: supplied by regulator-dummy [ 3.292002] vddio-ddr-1v1: supplied by regulator-dummy [ 3.296571] vdd-rtc: supplied by regulator-dummy [ 3.298426] spmic-ldo1: supplied by regulator-dummy [ 3.299663] vdd-ao-3v3: supplied by regulator-dummy [ 3.305833] vddio-emmc-3v3: supplied by regulator-dummy [ 3.312093] spmic-ldo4: supplied by regulator-dummy [ 3.313432] vdd-usb-3v3: supplied by regulator-dummy [ 3.319642] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.325842] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.331475] spmic-ldo8: supplied by vdd-1v8-ls [ 3.333000] gpio-510 (gpio_default): hogged as output/high [ 3.334407] gpio-511 (gpio_default): hogged as output/high [ 3.337305] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.474047] max77686-rtc max77620-rtc: registered as rtc0 [ 3.475371] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.475732] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.307089] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.308253] hid: raw HID events driver (C) Jiri Kosina [ 4.309112] usbcore: registered new interface driver usbhid [ 4.309266] usbhid: USB HID core driver [ 4.311322] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.312876] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.367830] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.442052] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.779 ms, total boot 75.031 ms) ÿá[ 4.397458] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.398056] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.399015] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.399830] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.401483] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.402157] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.402709] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.404127] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.404419] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.407068] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.413426] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.419882] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.425046] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.431028] denver_knobs_init:MTS_VERSION:55637613 [ 4.443085] t19x_cache tegra-cache: probed [ 4.446044] optee: probing for conduit method. [ 4.446889] optee: revision 3.16 (65cc2218) [ 4.447792] optee: dynamic shared memory is enabled [ 4.451987] optee: initialized driver [ 4.458886] nvpmodel: initialized successfully [ 4.459431] tegra_hv: get_hvd: not initialized yet [ 4.464187] user_ivc_mempool: hypervisor not present [ 4.470330] usbcore: registered new interface driver snd-usb-audio [ 4.477264] u32 classifier [ 4.478226] input device check on [ 4.481891] Actions configured [ 4.485307] Initializing XFRM netlink socket [ 4.490214] NET: Registered protocol family 10 [ 4.497262] Segment Routing with IPv6 [ 4.497590] NET: Registered protocol family 17 [ 4.502041] NET: Registered protocol family 15 [ 4.506198] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.519744] Bluetooth: RFCOMM socket layer initialized [ 4.524496] Bluetooth: RFCOMM ver 1.11 [ 4.528418] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.534467] Bluetooth: HIDP socket layer initialized [ 4.540015] 9pnet: Installing 9P2000 support [ 4.543662] Key type dns_resolver registered [ 4.549309] registered taskstats version 1 [ 4.552052] Loading compiled-in X.509 certificates [ 4.565258] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.568023] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.578205] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.580001] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.588875] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.596962] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.712826] tegra194-pcie 14160000.pcie: Link up [ 4.715906] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.716139] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.716279] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.716501] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.716789] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.717214] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.717686] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.730152] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.730688] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.731279] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.732881] pci 0004:01:00.0: supports D1 D2 [ 4.733090] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.744497] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.744980] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.745241] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.745780] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.746043] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.746294] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.747320] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.754793] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.763584] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.773906] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.778127] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.784045] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.790775] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.799991] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.801318] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.809940] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.818143] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.933298] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.933924] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.934114] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.934380] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.934733] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.934948] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.935500] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.936005] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.956290] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.956633] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.958488] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.959791] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.961758] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.963397] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.964446] pci 0005:00:00.0: Removing from iommu group 7 [ 5.965048] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 6.001763] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.026117] host1x 13e10000.host1x: initialized [ 6.027608] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.028633] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.029964] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.030715] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.031949] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.032578] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.033821] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.034435] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.035681] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.036288] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.043480] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.050121] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.060355] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.067235] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.077253] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.084469] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.094292] falcon 15340000.vic: Adding to iommu group 17 [ 6.108866] falcon 15340000.vic: initialized [ 6.109882] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.114844] falcon 15380000.nvjpg: initialized [ 6.115420] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.127108] falcon 154c0000.nvenc: initialized [ 6.127714] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.137630] falcon 15a80000.nvenc1: initialized [ 6.138250] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.150591] nvdec 15480000.nvdec: initialized [ 6.151130] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.161455] nvdec 15140000.nvdec1: initialized [ 6.162010] tsec 15500000.tsec: Adding to iommu group 18 [ 6.167813] tsec 15500000.tsec: initialized [ 6.168318] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.174830] tsec 15100000.tsecb: initialized [ 6.178553] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.207391] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.221153] gpio-374 (wifi-enable): hogged as output/high [ 6.221476] gpio-431 (camera-control-output-low): hogged as output/low [ 6.221870] gpio-432 (camera-control-output-low): hogged as output/low [ 6.223709] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.226133] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.226789] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.228355] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.230997] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.236880] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.242512] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.251652] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.257927] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.269920] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.274700] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.280585] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.289454] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.298695] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.305955] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.313619] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.319586] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.329445] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.331052] random: crng init done [ 6.335728] pva 16000000.pva0: Adding to iommu group 22 [ 6.367933] pva 16000000.pva0: initialized [ 6.373859] pva 16800000.pva1: Adding to iommu group 23 [ 6.385396] pva 16800000.pva1: initialized [ 6.390787] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.404905] nvdla 15880000.nvdla0: initialized [ 6.406505] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.423343] nvdla 158c0000.nvdla1: initialized [ 6.427332] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.427425] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.427692] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.428183] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.428383] tegradc 15200000.display: Adding to iommu group 26 [ 6.428432] tegradccommon 15200000.display-hub: dma mapping done [ 6.429095] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.430998] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.431481] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.434233] tegra_cec 3960000.tegra_cec: probed [ 6.436853] tegradc 15210000.display: Adding to iommu group 26 [ 6.437242] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.437392] generic_infoframe_type: 0x87 [ 6.437482] tegradc 15200000.display: DT parsed successfully [ 6.437562] tegradc 15200000.display: Display dc.00000000ae21585e registered with id=0 [ 6.440063] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.441126] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.441137] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.441140] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.441979] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.441986] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.443031] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.445190] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.457227] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.462421] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.469760] kfuse 3830000.kfuse: initialized [ 6.477168] tegradc 15210000.display: disp0 connected to head1->sor [ 6.483550] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.491435] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.499402] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.505495] tegradc 15210000.display: DT parsed successfully [ 6.511945] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.522180] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.594365] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.604013] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.609058] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.618060] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.623433] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.643371] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.643764] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.646481] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.655162] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.663767] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.670539] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.677906] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.685075] usb usb1: Product: xHCI Host Controller [ 6.689744] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.696091] usb usb1: SerialNumber: 3610000.xhci [ 6.701925] hub 1-0:1.0: USB hub found [ 6.704589] hub 1-0:1.0: 4 ports detected [ 6.709462] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.714015] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.721877] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.729526] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.737219] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.744463] usb usb2: Product: xHCI Host Controller [ 6.749687] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.755890] usb usb2: SerialNumber: 3610000.xhci [ 6.761391] hub 2-0:1.0: USB hub found [ 6.764364] hub 2-0:1.0: 4 ports detected [ 6.809195] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.815475] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.817084] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.817253] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.830594] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.831699] tegra194-cpufreq ccplex: probed with BWMGR [ 6.833054] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.833593] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.834041] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.835287] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.843149] tegra194-vi5 15c10000.vi: initialized [ 6.843300] mmc0: CQHCI version 5.10 [ 6.844450] tegradc 15210000.display: disp0 connected to head1->sor [ 6.846141] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.847898] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.854174] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.861327] tegradc 15210000.display: DT parsed successfully [ 6.869622] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.874891] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.875747] tegradc 15210000.display: disp0 connected to head1->sor [ 6.881347] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.889239] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.895608] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.902449] tegradc 15210000.display: DT parsed successfully [ 6.909699] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.916047] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.923789] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.928325] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.928726] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.928734] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.928740] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.937480] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.943588] generic_infoframe_type: 0x87 [ 6.956719] tegradc 15200000.display: DT parsed successfully [ 6.963519] nvethernet 2490000.ethernet: Macsec not supported [ 6.964899] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.970304] tegradc 15200000.display: Display dc.000000004d7e6f68 registered with id=0 [ 6.979775] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.982107] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.985336] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.985341] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.985344] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.985723] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.985728] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.985899] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.987967] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.988914] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.988920] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.991105] tegradc 15200000.display: probed [ 7.021890] mmc0: Command Queue Engine enabled [ 7.022282] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.030227] mmc0: periodic cache flush enabled [ 7.039645] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.046464] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.118241] tegra-se-nvhost 15810000.se: initialized [ 7.125558] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.134574] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.134798] Console: switching to colour frame buffer device 240x67 [ 7.139212] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.141689] tegradc 15200000.display: fb registered [ 7.141753] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 7.148529] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.149216] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 7.155157] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.159833] tegra-se-nvhost 15820000.se: initialized [ 7.164384] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.164391] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.164395] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.164398] usb 1-2: Manufacturer: Generic [ 7.165177] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.166363] hub 1-2:1.0: USB hub found [ 7.167411] hub 1-2:1.0: 4 ports detected [ 7.172825] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.235044] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.241058] tegra-se-nvhost 15830000.se: initialized [ 7.246515] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 7.247521] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.252143] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 7.261671] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.267618] tegra-se-nvhost 15840000.se: initialized [ 7.274324] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.274947] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.281191] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.281680] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.287013] Extcon AUX1(HDMI) enable [ 7.287161] tegradc 15210000.display: disp1 connected to head1->sor [ 7.295919] tegra_actmon d230000.actmon: in actmon_register()... [ 7.300486] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.308028] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.311640] tegradc 15210000.display: DT parsed successfully [ 7.317963] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.323739] tegradc 15210000.display: Display dc.000000006e762d9e registered with id=1 [ 7.331656] hvc_sysfs: hypervisor is not present [ 7.336404] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.339761] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.339766] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.339770] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.339773] usb 2-3: Manufacturer: Generic [ 7.350595] hub 2-3:1.0: USB hub found [ 7.358167] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.364666] hub 2-3:1.0: 4 ports detected [ 7.369313] ALSA device list: [ 7.376071] tegradc 15210000.display: probed [ 7.415245] No soundcards found. [ 7.415272] tegradc 15210000.display: fb registered ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.424210] tegradc 15200000.display: blank - powerdown [ 7.427062] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.427067] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.427092] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.428906] Freeing unused kernel memory: 3968K [ 7.440907] Run /init as init process [ 7.456752] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 7.460717] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.464596] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.464600] Extcon AUX1(HDMI) disable [ 7.487921] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.488775] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.500601] tegradc 15200000.display: unblank [ 7.501720] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.501930] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.507803] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.509659] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.513708] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.513712] Extcon AUX1(HDMI) enable [ 7.521276] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 7.521281] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.526434] tegradc 15200000.display: sync windows ret = 247 [ 7.568559] tegradc 15210000.display: blank - powerdown [ 7.573585] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.573589] Extcon DP: HPD disabled [ 7.573593] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.573605] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.573610] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.605602] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.610022] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.612480] Extcon HDMI: HPD enabled [ 7.620971] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.624438] tegradc 15200000.display: hdmi: plugged [ 7.631834] usb 1-3: Product: Bluetooth Radio [ 7.641188] usb 1-3: Manufacturer: Realtek [ 7.645378] usb 1-3: SerialNumber: 00e04c000001 [ 7.656364] Root device found: mmcblk0p1 [ 7.659828] Found dev node: /dev/mmcblk0p1 [ 7.695955] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.701447] Rootfs mounted over mmcblk0p1 [ 7.731171] Switching from initrd to actual rootfs [ 7.882134] systemd[1]: System time before build time, advancing clock. [ 7.952585] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.957805] systemd[1]: Detected architecture arm64. [ 8.009056] systemd[1]: Set hostname to . [ 8.179119] systemd-sysv-generator[263]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.521106] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.522900] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.528532] systemd[1]: Created slice system-modprobe.slice. [ 8.533441] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.537759] systemd[1]: Created slice User and Session Slice. [ 8.541417] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.545696] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.549133] systemd[1]: Reached target User and Group Name Lookups. [ 8.552408] systemd[1]: Reached target Slices. [ 8.555757] systemd[1]: Reached target Swap. [ 8.559919] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.563648] systemd[1]: Listening on Syslog Socket. [ 8.567397] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.570956] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.576793] systemd[1]: Listening on Journal Audit Socket. [ 8.581100] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.585534] systemd[1]: Listening on Journal Socket. [ 8.589411] systemd[1]: Listening on udev Control Socket. [ 8.593016] systemd[1]: Listening on udev Kernel Socket. [ 8.601583] systemd[1]: Mounting Huge Pages File System... [ 8.609974] systemd[1]: Mounting POSIX Message Queue File System... [ 8.618222] systemd[1]: Mounting RPC Pipe File System... [ 8.626852] systemd[1]: Mounting Kernel Debug File System... [ 8.635185] systemd[1]: Mounting Kernel Trace File System... [ 8.645178] systemd[1]: Starting Journal Service... [ 8.653908] systemd[1]: Starting Set the console keyboard layout... [ 8.662020] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.665543] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.671692] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.679597] systemd[1]: Started Nameserver information manager. [ 8.684936] systemd[1]: Reached target Network (Pre). [ 8.692013] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.694031] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.700622] systemd[1]: Starting Load Kernel Modules... [ 8.709607] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.718382] systemd[1]: Starting udev Coldplug all Devices... [ 8.730052] systemd[1]: Mounted Huge Pages File System. [ 8.733787] systemd[1]: Mounted POSIX Message Queue File System. [ 8.738118] systemd[1]: Mounted RPC Pipe File System. [ 8.739631] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.740592] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.743220] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.743228] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.743238] nvmap_page_pool_init: Total RAM pages: 1752672 [ 8.743241] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.744025] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.744769] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.753408] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.754938] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.756972] systemd[1]: Mounted Kernel Debug File System. [ 8.760919] systemd[1]: Mounted Kernel Trace File System. [ 8.769068] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.775417] systemd[1]: nvfb-udev.service: Succeeded. [ 8.781713] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.797684] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.802658] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.804390] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.813492] systemd[1]: Starting Load/Save Random Seed... [ 8.821439] systemd[1]: Starting Create System Users... [ 8.867471] systemd[1]: Finished Load/Save Random Seed. [ 8.877209] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.877209] [ 8.880359] systemd[1]: Finished Create System Users. [ 8.890096] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.912339] systemd[1]: Finished Set the console keyboard layout. [ 8.919585] systemd[1]: Finished Load Kernel Modules. [ 8.924182] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.930997] systemd[1]: Mounting Kernel Configuration File System... [ 8.940052] systemd[1]: Started OP-TEE Client Supplicant. [ 8.948897] systemd[1]: Starting Apply Kernel Variables... [ 8.961687] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.966192] systemd[1]: Mounted Kernel Configuration File System. [ 8.969992] systemd[1]: Reached target Local File Systems (Pre). [ 8.973395] systemd[1]: Reached target Local File Systems. [ 8.976872] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. [ 8.982640] systemd[1]: Starting Enable support for additional executable binary formats... [ 10.321223] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.327790] imx219 9-0010: board setup failed [ 10.329203] imx219: probe of 9-0010 failed with error -121 [ 10.341797] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.348452] imx219 10-0010: board setup failed [ 10.349927] imx219: probe of 10-0010 failed with error -121 [ 10.477913] hot-surface-alert cooling state: 0 -> 1 [ 11.100232] using random self ethernet address [ 11.120845] using random host ethernet address [ 11.818857] 1 fixed-partitions partitions found on MTD device spi6.0 [ 11.820196] Creating 1 MTD partitions on "spi6.0": [ 11.820204] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.556951] using random self ethernet address [ 12.558146] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 25.817136] nvidia: loading out-of-tree module taints kernel. [ 59.774385] watchdog: watchdog0: watchdog did not stop! [ 60.249380] Trying to unregister non-registered hwtime source [ 63.311390] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 63.313050] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 [ERR] t ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 66000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.357] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.224] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.233] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.282] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.291] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.349] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.404] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.487] I> register 'maxim' power off handle [0003.492] I> virtual i2c enabled [0003.492] I> registered 'maxim,max20024' pmic [0003.493] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.493] I> Boot-device: QSPI [0003.493] I> Boot_device: QSPI_FLASH instance: 0 [0003.495] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.526] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.540] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.590] I> regulator 'vdd-hdmi-5v0' already enabled [0003.595] I> regulator 'vdd-hdmi-5v0' already enabled [0003.596] I> hdmi cable connected [0003.601] W> set volts not configured for 'vdd-1v0' [0003.606] W> set volts not configured for 'vdd-1v8-hs' [0003.606] I> retrieved tmds range from prod_list_hdmi_soc [0003.612] E> invalid display type [0003.613] E> cannot find any other nvdisp nodes [0003.629] I> edid read success [0003.641] I> edid read success [0003.641] I> width = 640, height = 480, frequency = 25174825 [0003.642] I> width = 1920, height = 1080, frequency = 148500000 [0003.642] I> width = 1280, height = 768, frequency = 79500000 [0003.643] I> width = 1360, height = 768, frequency = 85500000 [0003.643] I> width = 720, height = 480, frequency = 26973026 [0003.647] I> width = 720, height = 576, frequency = 26973026 [0003.652] I> width = 1280, height = 720, frequency = 74175824 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1920, height = 1080, frequency = 148351648 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 720, height = 480, frequency = 26973026 [0003.681] I> width = 720, height = 576, frequency = 26973026 [0003.686] I> width = 3840, height = 2160, frequency = 296703296 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 4096, height = 2160, frequency = 296703296 [0003.715] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.726] I> hdmi_enable, starting HDMI initialisation [0003.731] I> hdmi_enable, HDMI initialisation complete [0003.741] initializing target [0003.742] calling apps_init() [0003.742] starting app kernel_boot_app [0003.743] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932992K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475324K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000879] Console: colour dummy device 80x25 [ 0.002343] printk: console [tty0] enabled [ 0.002415] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002470] pid_max: default: 32768 minimum: 301 [ 0.002701] LSM: Security Framework initializing [ 0.002766] Yama: becoming mindful. [ 0.002833] SELinux: Initializing. [ 0.003032] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003069] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006113] rcu: Hierarchical SRCU implementation. [ 0.006355] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007755] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007813] DTB Build time: Aug 10 2022 20:31:49 [ 0.011814] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.012163] Remapping and enabling EFI services. [ 0.014604] smp: Bringing up secondary CPUs ... [ 0.043660] Detected PIPT I-cache on CPU1 [ 0.043752] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.074232] Detected PIPT I-cache on CPU2 [ 0.074379] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103872] Detected PIPT I-cache on CPU3 [ 0.103971] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133656] Detected PIPT I-cache on CPU4 [ 0.133813] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.163442] Detected PIPT I-cache on CPU5 [ 0.163632] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163994] smp: Brought up 1 node, 6 CPUs [ 0.164233] SMP: Total of 6 processors activated. [ 0.164300] CPU features: detected: Privileged Access Never [ 0.164325] CPU features: detected: LSE atomic instructions [ 0.164340] CPU features: detected: User Access Override [ 0.164354] CPU features: detected: 32-bit EL0 Support [ 0.164368] CPU features: detected: RAS Extension Support [ 0.164381] CPU features: detected: CRC32 instructions [ 0.164395] CPU features: detected: 32-bit EL1 Support [ 0.231065] CPU: All CPU(s) started at EL2 [ 0.237633] devtmpfs: initialized [ 0.285779] Registered cp15_barrier emulation handler [ 0.285905] Registered setend emulation handler [ 0.285928] KASLR enabled [ 0.286170] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.286200] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.287472] pinctrl core: initialized pinctrl subsystem [ 0.288495] SMBIOS 3.0.0 present. [ 0.288525] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.289121] NET: Registered protocol family 16 [ 0.291015] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.291519] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.292231] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.292292] audit: initializing netlink subsys (disabled) [ 0.292556] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1 [ 0.292943] thermal_sys: Registered thermal governor 'step_wise' [ 0.292949] thermal_sys: Registered thermal governor 'power_allocator' [ 0.292966] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.295000] cpuidle: using governor menu [ 0.295340] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.295718] ASID allocator initialised with 32768 entries [ 0.295955] Serial: AMBA PL011 UART driver [ 0.298953] Tegra reboot handler registered. [ 0.369778] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.369898] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.370134] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.370181] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.370303] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.370346] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.370459] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.370506] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.370627] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.370670] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.372847] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.372884] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.372913] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.372940] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.372969] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.373008] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.373039] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.373070] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.373097] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.373122] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.373148] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.373174] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.373200] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.373246] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.373272] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.373298] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.373324] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.373410] mc-err: mcerr ops are set to t19x [ 0.386485] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.386514] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.386530] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.386545] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.393183] ACPI: Interpreter disabled. [ 0.394427] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.395705] iommu: Default domain type: Translated [ 0.395776] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.396139] SCSI subsystem initialized [ 0.396328] usbcore: registered new interface driver usbfs [ 0.396375] usbcore: registered new interface driver hub [ 0.396412] usbcore: registered new device driver usb [ 0.396824] mc: Linux media interface: v0.10 [ 0.396857] videodev: Linux video capture interface: v2.00 [ 0.397161] pps_core: LinuxPPS API ver. 1 registered [ 0.397175] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.397201] PTP clock support registered [ 0.397414] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.397824] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.397917] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.398737] Registered efivars operations [ 0.404360] FPGA manager framework [ 0.404506] Advanced Linux Sound Architecture Driver Initialized. [ 0.405219] Bluetooth: Core ver 2.22 [ 0.405266] NET: Registered protocol family 31 [ 0.405282] Bluetooth: HCI device and connection manager initialized [ 0.405304] Bluetooth: HCI socket layer initialized [ 0.405324] Bluetooth: L2CAP socket layer initialized [ 0.405352] Bluetooth: SCO socket layer initialized [ 0.406892] camchar: rtcpu character device driver loaded [ 0.407658] clocksource: Switched to clocksource arch_sys_counter [ 0.696937] VFS: Disk quotas dquot_6.6.0 [ 0.697014] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.697308] pnp: PnP ACPI: disabled [ 0.710928] la/ptsa driver initialized. [ 0.711083] NET: Registered protocol family 2 [ 0.711245] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.715917] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.715990] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.716294] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.716746] TCP: Hash tables configured (established 65536 bind 65536) [ 0.716866] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.716965] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.717168] NET: Registered protocol family 1 [ 0.718143] RPC: Registered named UNIX socket transport module. [ 0.718183] RPC: Registered udp transport module. [ 0.718206] RPC: Registered tcp transport module. [ 0.718227] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.718259] PCI: CLS 0 bytes, default 64 [ 0.718608] Trying to unpack rootfs image as initramfs... [ 0.985842] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.989196] Freeing initrd memory: 8196K [ 0.994032] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.994068] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.994108] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.994496] kvm [1]: IPA Size Limit: 40 bits [ 0.995036] kvm [1]: vgic interrupt IRQ9 [ 0.995597] kvm [1]: VHE mode initialized successfully [ 0.997299] Initialise system trusted keyrings [ 0.997655] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.004737] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.005636] NFS: Registering the id_resolver key type [ 1.005680] Key type id_resolver registered [ 1.005710] Key type id_legacy registered [ 1.005803] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.005841] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.005887] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.015624] NET: Registered protocol family 38 [ 1.015695] Key type asymmetric registered [ 1.015711] Asymmetric key parser 'x509' registered [ 1.015760] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.016089] io scheduler mq-deadline registered [ 1.016109] io scheduler kyber registered [ 1.022210] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.025477] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.025587] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.025690] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.025787] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.025857] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.032355] scrncapt: init (heads:4 wins:6 planes:4) [ 1.032746] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.033645] EINJ: ACPI disabled. [ 1.037209] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.037235] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.037249] tegra-pmc: ### PMC reset level: L1 [ 1.037263] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.037321] tegra-pmc: PMC Prod config success [ 1.042622] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.062146] random: fast init done [ 1.071051] printk: console [ttyTCU0] enabled [ 2.600415] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.605064] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.609647] arm-smmu 10000000.iommu: stage 1 translation [ 2.615014] arm-smmu 10000000.iommu: stage 2 translation [ 2.620658] arm-smmu 10000000.iommu: nested translation [ 2.625709] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.633144] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.644137] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.645988] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.652583] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.660330] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.665874] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.670334] arm-smmu 12000000.iommu: stage 1 translation [ 2.675842] arm-smmu 12000000.iommu: stage 2 translation [ 2.681524] arm-smmu 12000000.iommu: nested translation [ 2.686695] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.693878] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.705377] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.706972] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.713850] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.720948] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.731063] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.733995] tegra_profiler: auth: init [ 2.738695] THERMAL EST: found 3 subdevs [ 2.741909] THERMAL EST num_resources: 0 [ 2.745751] [THERMAL EST subdev 0] [ 2.748838] [THERMAL EST subdev 1] [ 2.752493] [THERMAL EST subdev 2] [ 2.755460] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.762184] THERMAL EST: thz register success. [ 2.766185] THERMAL EST: end of probe, return err: 0 [ 2.771786] nvsciipc: loaded module [ 2.778972] tun: Universal TUN/TAP device driver, 1.6 [ 2.781313] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.787506] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.792816] e1000e: Intel(R) PRO/1000 Network Driver [ 2.797988] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.803833] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.809108] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.815612] PPP generic driver version 2.4.2 [ 2.819873] PPP BSD Compression module registered [ 2.824077] PPP Deflate Compression module registered [ 2.829326] PPP MPPE Compression module registered [ 2.834606] usbcore: registered new interface driver r8152 [ 2.840156] usbcore: registered new interface driver asix [ 2.845194] usbcore: registered new interface driver ax88179_178a [ 2.851565] usbcore: registered new interface driver cdc_ether [ 2.857257] usbcore: registered new interface driver net1080 [ 2.862886] usbcore: registered new interface driver cdc_subset [ 2.869183] usbcore: registered new interface driver zaurus [ 2.874616] usbcore: registered new interface driver cdc_ncm [ 2.880303] usbcore: registered new interface driver aqc111 [ 2.885909] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.891996] ohci-pci: OHCI PCI platform driver [ 2.896572] ohci-platform: OHCI generic platform driver [ 2.902673] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.908933] usbcore: registered new interface driver uas [ 2.912842] usbcore: registered new interface driver usb-storage [ 2.918743] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.925087] mousedev: PS/2 mouse device common for all mice [ 2.929748] usbcore: registered new interface driver xpad [ 2.938042] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.940768] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.948528] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.955119] i2c /dev entries driver [ 2.958181] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.964225] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.969256] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.974710] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.980027] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.985529] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.990918] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.004587] device-mapper: uevent: version 1.0.3 [ 3.005014] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.011309] cpuidle: Initializing cpuidle driver [ 3.015354] sdhci: Secure Digital Host Controller Interface driver [ 3.020088] sdhci: Copyright(c) Pierre Ossman [ 3.024451] Synopsys Designware Multimedia Card Interface Driver [ 3.030403] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.036515] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.037283] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.049704] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.071036] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.080902] vdd-1v0: supplied by regulator-dummy [ 3.086455] vdd-1v8-hs: supplied by regulator-dummy [ 3.091335] vdd-1v8-ls: supplied by regulator-dummy [ 3.096209] vdd-1v8-ao: supplied by regulator-dummy [ 3.100156] vddio-ddr-1v1: supplied by regulator-dummy [ 3.104791] vdd-rtc: supplied by regulator-dummy [ 3.106546] spmic-ldo1: supplied by regulator-dummy [ 3.107955] vdd-ao-3v3: supplied by regulator-dummy [ 3.114256] vddio-emmc-3v3: supplied by regulator-dummy [ 3.120622] spmic-ldo4: supplied by regulator-dummy [ 3.121904] vdd-usb-3v3: supplied by regulator-dummy [ 3.128146] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.134495] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.140122] spmic-ldo8: supplied by vdd-1v8-ls [ 3.141667] gpio-510 (gpio_default): hogged as output/high [ 3.143033] gpio-511 (gpio_default): hogged as output/high [ 3.146015] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.282440] max77686-rtc max77620-rtc: registered as rtc0 [ 3.283558] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.283942] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.114969] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.116131] hid: raw HID events driver (C) Jiri Kosina [ 4.116989] usbcore: registered new interface driver usbhid [ 4.117124] usbhid: USB HID core driver [ 4.119206] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.120748] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.053760] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.128025] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.777 ms, total boot 75.072 ms) ÿá[ 4.205082] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.205781] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.207015] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.208024] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.209818] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.210572] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.211341] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.212645] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.212873] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.215443] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.221643] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.227879] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.232819] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.239431] denver_knobs_init:MTS_VERSION:55637613 [ 4.252238] t19x_cache tegra-cache: probed [ 4.256221] optee: probing for conduit method. [ 4.257157] optee: revision 3.16 (65cc2218) [ 4.258524] optee: dynamic shared memory is enabled [ 4.259912] optee: initialized driver [ 4.268410] nvpmodel: initialized successfully [ 4.269244] tegra_hv: get_hvd: not initialized yet [ 4.272057] user_ivc_mempool: hypervisor not present [ 4.278173] usbcore: registered new interface driver snd-usb-audio [ 4.284827] u32 classifier [ 4.285769] input device check on [ 4.289700] Actions configured [ 4.293260] Initializing XFRM netlink socket [ 4.298012] NET: Registered protocol family 10 [ 4.305223] Segment Routing with IPv6 [ 4.305570] NET: Registered protocol family 17 [ 4.309688] NET: Registered protocol family 15 [ 4.314372] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.327953] Bluetooth: RFCOMM socket layer initialized [ 4.332654] Bluetooth: RFCOMM ver 1.11 [ 4.336353] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.342413] Bluetooth: HIDP socket layer initialized [ 4.348161] 9pnet: Installing 9P2000 support [ 4.351821] Key type dns_resolver registered [ 4.357231] registered taskstats version 1 [ 4.360048] Loading compiled-in X.509 certificates [ 4.372398] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.375762] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.386355] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.388253] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.396520] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.405148] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.519888] tegra194-pcie 14160000.pcie: Link up [ 4.522551] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.522794] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.522954] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.523191] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.523390] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.523839] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.524275] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.537862] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.538377] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.538841] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.540487] pci 0004:01:00.0: supports D1 D2 [ 4.540665] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.549243] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.549669] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.549944] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.550317] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.550607] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.550807] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.554568] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.561821] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.570646] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.580822] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.585514] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.590805] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.597770] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.607023] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.608447] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.616808] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.625677] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.740936] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.741569] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.741864] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.742021] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.742295] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.742492] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.742851] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.743276] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.759115] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.759552] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.761546] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.762734] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.764473] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.765965] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.766722] pci 0005:00:00.0: Removing from iommu group 7 [ 5.767052] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.796554] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.817787] host1x 13e10000.host1x: initialized [ 5.819228] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.820287] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.821251] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.821956] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.822884] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.823548] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.824692] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.825387] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.833985] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.840850] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.851076] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.858292] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.868061] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.874836] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.884736] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.892136] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.902014] falcon 15340000.vic: Adding to iommu group 17 [ 5.916781] falcon 15340000.vic: initialized [ 5.917876] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.923552] falcon 15380000.nvjpg: initialized [ 5.924175] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.934577] falcon 154c0000.nvenc: initialized [ 5.935157] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.944944] falcon 15a80000.nvenc1: initialized [ 5.945662] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.957373] nvdec 15480000.nvdec: initialized [ 5.958114] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.968402] nvdec 15140000.nvdec1: initialized [ 5.968953] tsec 15500000.tsec: Adding to iommu group 18 [ 5.974701] tsec 15500000.tsec: initialized [ 5.975187] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.981527] tsec 15100000.tsecb: initialized [ 5.985329] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.010192] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.022946] gpio-374 (wifi-enable): hogged as output/high [ 6.023290] gpio-431 (camera-control-output-low): hogged as output/low [ 6.023614] gpio-432 (camera-control-output-low): hogged as output/low [ 6.025481] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.027308] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.027982] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.033117] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.038466] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.044370] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.049808] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.057747] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.065455] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.076768] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.082063] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.087990] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.097180] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.106522] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.113811] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.121646] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.127310] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.137482] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.143493] pva 16000000.pva0: Adding to iommu group 22 [ 6.170266] pva 16000000.pva0: initialized [ 6.175236] pva 16800000.pva1: Adding to iommu group 23 [ 6.186795] pva 16800000.pva1: initialized [ 6.191236] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.203399] nvdla 15880000.nvdla0: initialized [ 6.204781] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.213674] nvdla 158c0000.nvdla1: initialized [ 6.217596] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.217652] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.217855] tegradc 15200000.display: Adding to iommu group 26 [ 6.217930] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.218254] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.218571] tegradccommon 15200000.display-hub: dma mapping done [ 6.219605] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.226813] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.226875] tegradc 15210000.display: Adding to iommu group 26 [ 6.227377] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.234010] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.234214] generic_infoframe_type: 0x87 [ 6.234344] tegradc 15200000.display: DT parsed successfully [ 6.234488] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.260508] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.268050] tegra_cec 3960000.tegra_cec: probed [ 6.269198] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.276355] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.276364] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.287510] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.297367] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.303504] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.322251] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.322701] kfuse 3830000.kfuse: initialized [ 6.338471] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.344101] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.344835] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.351100] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.364033] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.364712] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.372468] tegradc 15210000.display: disp0 connected to head1->sor [ 6.381571] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.386089] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.392061] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.398827] tegradc 15210000.display: DT parsed successfully [ 6.408699] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.413287] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.427420] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.447124] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.447463] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.450857] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.458994] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.467731] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.474348] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.481710] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.489066] usb usb1: Product: xHCI Host Controller [ 6.494200] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.500292] usb usb1: SerialNumber: 3610000.xhci [ 6.505978] hub 1-0:1.0: USB hub found [ 6.509106] hub 1-0:1.0: 4 ports detected [ 6.513436] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.518587] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.526103] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.533951] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.541464] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.548955] usb usb2: Product: xHCI Host Controller [ 6.553620] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.559866] usb usb2: SerialNumber: 3610000.xhci [ 6.565701] hub 2-0:1.0: USB hub found [ 6.568655] hub 2-0:1.0: 4 ports detected [ 6.606949] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.613056] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.614417] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.614599] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.627793] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.628809] tegra194-cpufreq ccplex: probed with BWMGR [ 6.630094] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.630732] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.631219] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.632592] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.643770] mmc0: CQHCI version 5.10 [ 6.645046] tegra194-vi5 15c10000.vi: initialized [ 6.647377] tegradc 15210000.display: disp0 connected to head1->sor [ 6.648375] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.652068] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.658375] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.665562] tegradc 15210000.display: DT parsed successfully [ 6.673453] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.679088] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.679142] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.685783] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.693624] generic_infoframe_type: 0x87 [ 6.699811] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.706610] tegradc 15200000.display: DT parsed successfully [ 6.710412] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.715725] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.717273] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.719151] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.722871] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.735738] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.744068] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.751701] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.751705] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.766593] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.774872] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.775700] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.781892] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.782061] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 6.797073] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.810012] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.816343] nvethernet 2490000.ethernet: Macsec not supported [ 6.829844] tegradc 15200000.display: probed [ 6.853653] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.862155] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.866472] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.873629] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.881571] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.888062] tegra-se-nvhost 15810000.se: initialized [ 6.896331] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 6.897884] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 6.904655] tegra-se-nvhost 15820000.se: initialized [ 6.905172] mmc0: Command Queue Engine enabled [ 6.913081] mmc0: periodic cache flush enabled [ 6.913098] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 6.913444] Console: switching to colour frame buffer device 240x67 [ 6.913684] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 6.913697] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 6.914178] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 6.917579] tegradc 15200000.display: fb registered [ 6.924355] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 6.930430] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 6.941400] tegra-se-nvhost 15830000.se: initialized [ 6.948240] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.953695] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 6.959616] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.965732] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.976660] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 6.983068] tegra-se-nvhost 15840000.se: initialized [ 6.996820] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 7.004294] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 7.007084] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.017045] tegra_actmon d230000.actmon: in actmon_register()... [ 7.021521] usb 1-2: Product: 4-Port USB 2.0 Hub [ 7.028570] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 7.048663] usb 1-2: Manufacturer: Generic [ 7.049640] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 7.052600] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 7.060521] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 7.074522] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 7.074659] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.081941] hub 1-2:1.0: USB hub found [ 7.082375] hvc_sysfs: hypervisor is not present [ 7.089042] Extcon AUX1(HDMI) enable [ 7.089164] tegradc 15210000.display: disp1 connected to head1->sor [ 7.094370] hub 1-2:1.0: 4 ports detected [ 7.097390] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 7.118845] tegradc 15210000.display: DT parsed successfully [ 7.118855] ALSA device list: [ 7.124325] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 7.127333] No soundcards found. [ 7.135885] tegradc 15210000.display: vblank syncpt # 17 for dc 1 [ 7.145398] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 7.145438] tegradc 15210000.display: vpulse3 syncpt # 18 for dc 1 [ 7.165595] tegradc 15210000.display: probed [ 7.165894] tegradc 15210000.display: fb registered [ 7.171610] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 7.175684] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 7.177445] Freeing unused kernel memory: 3968K [ 7.183147] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 7.193476] tegradc 15210000.display: blank - powerdown [ 7.198599] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 7.199789] Run /init as init process [ 7.206578] Extcon DP: HPD disabled [ 7.210442] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 7.213922] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 7.222022] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.222027] usb 2-3: Product: 4-Port USB 3.0 Hub [ 7.222031] usb 2-3: Manufacturer: Generic [ 7.244677] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 7.251533] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 7.257274] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 7.262848] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 7.275090] hub 2-3:1.0: USB hub found [ 7.277168] hub 2-3:1.0: 4 ports detected [ 7.296038] Root device found: mmcblk0p1 [ 7.298183] Found dev node: /dev/mmcblk0p1 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 7.301186] tegradc 15200000.display: blank - powerdown [ 7.307727] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 7.332916] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 7.336842] Rootfs mounted over mmcblk0p1 [ 7.345735] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 7.345739] Extcon AUX1(HDMI) disable [ 7.369476] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 7.370279] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 7.372103] Switching from initrd to actual rootfs [ 7.383759] tegradc 15200000.display: unblank [ 7.384768] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 7.384980] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 7.390694] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 7.392636] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 7.396709] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 7.396713] Extcon AUX1(HDMI) enable [ 7.409402] tegradc 15200000.display: sync windows ret = 247 [ 7.440114] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 7.441654] Extcon HDMI: HPD enabled [ 7.443093] tegradc 15200000.display: hdmi: plugged [ 7.456992] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 7.458418] random: crng init done [ 7.458519] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.458531] usb 1-3: Product: Bluetooth Radio [ 7.462568] usb 1-3: Manufacturer: Realtek [ 7.464177] usb 1-3: SerialNumber: 00e04c000001 [ 7.536217] systemd[1]: System time before build time, advancing clock. [ 7.606297] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 7.611370] systemd[1]: Detected architecture arm64. [ 7.678700] systemd[1]: Set hostname to . [ 7.843386] systemd-sysv-generator[258]: Overwriting existing symlink /run/systemd/generator.late/reboot_test.service with real service. [ 8.194168] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.195971] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 8.201570] systemd[1]: Created slice system-modprobe.slice. [ 8.206439] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.210726] systemd[1]: Created slice User and Session Slice. [ 8.214213] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 8.218356] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 8.221697] systemd[1]: Reached target User and Group Name Lookups. [ 8.224824] systemd[1]: Reached target Slices. [ 8.227880] systemd[1]: Reached target Swap. [ 8.231835] systemd[1]: Listening on RPCbind Server Activation Socket. [ 8.235411] systemd[1]: Listening on Syslog Socket. [ 8.239005] systemd[1]: Listening on fsck to fsckd communication Socket. [ 8.242397] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 8.246501] systemd[1]: Listening on Journal Audit Socket. [ 8.250075] systemd[1]: Listening on Journal Socket (/dev/log). [ 8.253745] systemd[1]: Listening on Journal Socket. [ 8.257409] systemd[1]: Listening on udev Control Socket. [ 8.260867] systemd[1]: Listening on udev Kernel Socket. [ 8.270843] systemd[1]: Mounting Huge Pages File System... [ 8.280939] systemd[1]: Mounting POSIX Message Queue File System... [ 8.289024] systemd[1]: Mounting RPC Pipe File System... [ 8.297544] systemd[1]: Mounting Kernel Debug File System... [ 8.306513] systemd[1]: Mounting Kernel Trace File System... [ 8.316702] systemd[1]: Starting Journal Service... [ 8.325811] systemd[1]: Starting Set the console keyboard layout... [ 8.334212] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 8.337704] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 8.344012] systemd[1]: Starting NVIDIA specific first-boot udev script... [ 8.353465] systemd[1]: Started Nameserver information manager. [ 8.359622] systemd[1]: Reached target Network (Pre). [ 8.366765] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 8.369170] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 8.377359] systemd[1]: Starting Load Kernel Modules... [ 8.385019] systemd[1]: Starting Remount Root and Kernel File Systems... [ 8.394065] systemd[1]: Starting udev Coldplug all Devices... [ 8.403937] systemd[1]: Mounted Huge Pages File System. [ 8.407571] systemd[1]: Mounted POSIX Message Queue File System. [ 8.411190] systemd[1]: Mounted RPC Pipe File System. [ 8.414946] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [ 8.415801] systemd[1]: Mounted Kernel Debug File System. [ 8.416738] nvmap_heap_init: nvmap_heap_init: created heap block cache [ 8.420015] tegra-carveouts tegra-carveouts: vpr :dma coherent mem declare 0x00000000ce000000,704643072 [ 8.420022] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout [ 8.420030] nvmap_page_pool_init: Total RAM pages: 1752673 [ 8.420034] nvmap_page_pool_init: nvmap page pool size: 219084 pages (855 MB) [ 8.420279] nvmap_background_zero_thread: PP zeroing thread starting. [ 8.420443] misc nvmap: created heap vpr base 0x00000000ce000000 size (688128KiB) [ 8.420607] misc nvmap: cvsram :dma coherent mem declare 0x0000000050000000,4194304 [ 8.430574] misc nvmap: created heap cvsram base 0x0000000050000000 size (4096KiB) [ 8.435216] systemd[1]: Mounted Kernel Trace File System. [ 8.441379] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 8.448310] systemd[1]: nvfb-udev.service: Succeeded. [ 8.453456] systemd[1]: Finished NVIDIA specific first-boot udev script. [ 8.465403] systemd[1]: Finished Remount Root and Kernel File Systems. [ 8.470909] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 8.472686] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 8.486210] systemd[1]: Starting Load/Save Random Seed... [ 8.495742] systemd[1]: Starting Create System Users... [ 8.536536] nvgpu: 17000000.gv11b nvgpu_nvhost_syncpt_init:135 [INFO] syncpt_unit_base 60000000 syncpt_unit_size 400000 size 1000 [ 8.536536] [ 8.545870] systemd[1]: Finished Load/Save Random Seed. [ 8.558856] systemd[1]: Finished Create System Users. [ 8.567160] systemd[1]: Starting Create Static Device Nodes in /dev... [ 8.574120] systemd[1]: Finished Load Kernel Modules. [ 8.578754] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 8.585186] systemd[1]: Mounting Kernel Configuration File System... [ 8.594085] systemd[1]: Started OP-TEE Client Supplicant. [ 8.602863] systemd[1]: Starting Apply Kernel Variables... [ 8.613162] systemd[1]: Finished Set the console keyboard layout. [ 8.617562] systemd[1]: Mounted Kernel Configuration File System. [ 8.624037] systemd[1]: Finished Create Static Device Nodes in /dev. [ 8.627978] systemd[1]: Reached target Local File Systems (Pre). [ 8.631054] systemd[1]: Reached target Local File Systems. [ 10.176273] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.185610] imx219 9-0010: board setup failed [ 10.186968] imx219: probe of 9-0010 failed with error -121 [ 10.204821] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121) [ 10.212632] imx219 10-0010: board setup failed [ 10.214109] imx219: probe of 10-0010 failed with error -121 [ 10.237603] hot-surface-alert cooling state: 0 -> 1 [ 10.787136] using random self ethernet address [ 10.805808] using random host ethernet address [ 12.076541] 1 fixed-partitions partitions found on MTD device spi6.0 [ 12.076547] Creating 1 MTD partitions on "spi6.0": [ 12.076556] 0x000000000000-0x000002000000 : "Whole_flash0" [ 12.524219] using random self ethernet address [ 12.525313] using random host ethernet address Ubuntu 20.04.4 LTS nvidia-desktop ttyTCU0 nvidia-desktop login: [ 26.010129] nvidia: loading out-of-tree module taints kernel. [ 58.301522] watchdog: watchdog0: watchdog did not stop! [ 58.820549] Trying to unregister non-registered hwtime source [ 61.887173] nvgpu: 17000000.gv11b nvgpu_timeout_expired_msg_cpu:94 [ERR] Timeout detected @ gp10b_gr_init_wait_empty+0x168/0x2a0 [nvgpu] [ 61.888658] nvgpu: 17000000.gv11b gp10b_gr_init_wait_empty:99 ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0xb, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.105] I> Temperature = 66500 [0000.108] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.199] I> Qspi flash params source = mb1bct [0000.233] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.905] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.922] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.949] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.323] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.031] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.338] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.353] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized noc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized ÿä3ÿâcvc initialized ÿä:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.458] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.465] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.471] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.487] I> virtual i2c enabled [0003.487] I> registered 'maxim,max20024' pmic [0003.488] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.488] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.605] W> set volts not configured for 'vdd-1v0' [0003.610] W> set volts not configured for 'vdd-1v8-hs' [0003.611] I> retrieved tmds range from prod_list_hdmi_soc [0003.616] E> invalid display type [0003.617] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.646] I> edid read success [0003.646] I> width = 640, height = 480, frequency = 25174825 [0003.647] I> width = 1920, height = 1080, frequency = 148500000 [0003.647] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.648] I> width = 720, height = 480, frequency = 26973026 [0003.652] I> width = 720, height = 576, frequency = 26973026 [0003.657] I> width = 1280, height = 720, frequency = 74175824 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 720, height = 480, frequency = 26973026 [0003.686] I> width = 720, height = 576, frequency = 26973026 [0003.691] I> width = 3840, height = 2160, frequency = 296703296 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.703] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 4096, height = 2160, frequency = 296703296 [0003.720] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.731] I> hdmi_enable, starting HDMI initialisation [0003.736] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.746] calling apps_init() [0003.747] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000676] Console: colour dummy device 80x25 [ 0.002055] printk: console [tty0] enabled [ 0.002120] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002155] pid_max: default: 32768 minimum: 301 [ 0.002323] LSM: Security Framework initializing [ 0.002385] Yama: becoming mindful. [ 0.002427] SELinux: Initializing. [ 0.002573] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002609] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005405] rcu: Hierarchical SRCU implementation. [ 0.005725] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006567] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006620] DTB Build time: Aug 10 2022 20:31:49 [ 0.009504] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009748] Remapping and enabling EFI services. [ 0.011800] smp: Bringing up secondary CPUs ... [ 0.041103] Detected PIPT I-cache on CPU1 [ 0.041186] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073527] Detected PIPT I-cache on CPU2 [ 0.073627] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103258] Detected PIPT I-cache on CPU3 [ 0.103352] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.133065] Detected PIPT I-cache on CPU4 [ 0.133168] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162879] Detected PIPT I-cache on CPU5 [ 0.162971] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.163376] smp: Brought up 1 node, 6 CPUs [ 0.163548] SMP: Total of 6 processors activated. [ 0.163624] CPU features: detected: Privileged Access Never [ 0.163649] CPU features: detected: LSE atomic instructions [ 0.163664] CPU features: detected: User Access Override [ 0.163680] CPU features: detected: 32-bit EL0 Support [ 0.163696] CPU features: detected: RAS Extension Support [ 0.163710] CPU features: detected: CRC32 instructions [ 0.163725] CPU features: detected: 32-bit EL1 Support [ 0.231557] CPU: All CPU(s) started at EL2 [ 0.239201] devtmpfs: initialized [ 0.290634] Registered cp15_barrier emulation handler [ 0.290817] Registered setend emulation handler [ 0.290839] KASLR enabled [ 0.291099] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.291124] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.292484] pinctrl core: initialized pinctrl subsystem [ 0.293405] SMBIOS 3.0.0 present. [ 0.293463] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.294101] NET: Registered protocol family 16 [ 0.296507] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.297049] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.297812] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.297891] audit: initializing netlink subsys (disabled) [ 0.298124] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.298558] thermal_sys: Registered thermal governor 'step_wise' [ 0.298564] thermal_sys: Registered thermal governor 'power_allocator' [ 0.298577] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.302856] cpuidle: using governor menu [ 0.303399] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.303884] ASID allocator initialised with 32768 entries [ 0.304095] Serial: AMBA PL011 UART driver [ 0.307672] Tegra reboot handler registered. [ 0.379223] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.379440] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.379664] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.379713] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.379835] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.379877] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.380010] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.380051] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.380216] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.380258] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.382593] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.382631] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.382665] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.382694] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.382724] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.382751] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.382785] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.382815] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.382845] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.382869] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.382893] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.382917] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.382941] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.382965] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.383011] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.383036] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.383075] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.383199] mc-err: mcerr ops are set to t19x [ 0.394719] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.394746] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.394760] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.394773] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.402875] ACPI: Interpreter disabled. [ 0.404613] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.406400] iommu: Default domain type: Translated [ 0.406516] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.407056] SCSI subsystem initialized [ 0.407309] usbcore: registered new interface driver usbfs [ 0.407365] usbcore: registered new interface driver hub [ 0.407418] usbcore: registered new device driver usb [ 0.408102] mc: Linux media interface: v0.10 [ 0.408151] videodev: Linux video capture interface: v2.00 [ 0.408623] pps_core: LinuxPPS API ver. 1 registered [ 0.408643] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.408674] PTP clock support registered [ 0.408967] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.409371] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.409528] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.410688] Registered efivars operations [ 0.419192] FPGA manager framework [ 0.419354] Advanced Linux Sound Architecture Driver Initialized. [ 0.420211] Bluetooth: Core ver 2.22 [ 0.420268] NET: Registered protocol family 31 [ 0.420286] Bluetooth: HCI device and connection manager initialized [ 0.420308] Bluetooth: HCI socket layer initialized [ 0.420326] Bluetooth: L2CAP socket layer initialized [ 0.420385] Bluetooth: SCO socket layer initialized [ 0.422518] camchar: rtcpu character device driver loaded [ 0.423801] clocksource: Switched to clocksource arch_sys_counter [ 0.844184] VFS: Disk quotas dquot_6.6.0 [ 0.844281] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.844755] pnp: PnP ACPI: disabled [ 0.859504] la/ptsa driver initialized. [ 0.859673] NET: Registered protocol family 2 [ 0.859926] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.867487] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.867680] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.868077] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.868713] TCP: Hash tables configured (established 65536 bind 65536) [ 0.868939] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.869086] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.869399] NET: Registered protocol family 1 [ 0.870334] RPC: Registered named UNIX socket transport module. [ 0.870372] RPC: Registered udp transport module. [ 0.870388] RPC: Registered tcp transport module. [ 0.870404] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.870448] PCI: CLS 0 bytes, default 64 [ 0.870793] Trying to unpack rootfs image as initramfs... [ 1.140026] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.143204] Freeing initrd memory: 8196K [ 1.148408] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.148446] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.148482] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.148873] kvm [1]: IPA Size Limit: 40 bits [ 1.149475] kvm [1]: vgic interrupt IRQ9 [ 1.150013] kvm [1]: VHE mode initialized successfully [ 1.151620] Initialise system trusted keyrings [ 1.152104] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.158273] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.159131] NFS: Registering the id_resolver key type [ 1.159172] Key type id_resolver registered [ 1.159189] Key type id_legacy registered [ 1.159278] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.159305] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.159349] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.169665] NET: Registered protocol family 38 [ 1.169697] Key type asymmetric registered [ 1.169714] Asymmetric key parser 'x509' registered [ 1.169780] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.170037] io scheduler mq-deadline registered [ 1.170060] io scheduler kyber registered [ 1.176444] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.179709] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.179882] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.180000] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.180101] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.180181] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.186434] scrncapt: init (heads:4 wins:6 planes:4) [ 1.186531] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.187620] EINJ: ACPI disabled. [ 1.191180] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.191210] tegra-pmc: ### PMC reset source: MAINSWRST [ 1.191226] tegra-pmc: ### PMC reset level: L1 [ 1.191240] tegra-pmc: ### PMC reset status reg: 0x2d [ 1.191316] tegra-pmc: PMC Prod config success [ 1.196876] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.223769] random: fast init done [ 1.225314] printk: console [ttyTCU0] enabled [ 2.754683] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.759428] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.764019] arm-smmu 10000000.iommu: stage 1 translation [ 2.769143] arm-smmu 10000000.iommu: stage 2 translation [ 2.774897] arm-smmu 10000000.iommu: nested translation [ 2.779977] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.787173] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.798339] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.800275] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.807101] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.814596] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.820133] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.824603] arm-smmu 12000000.iommu: stage 1 translation [ 2.830367] arm-smmu 12000000.iommu: stage 2 translation [ 2.835534] arm-smmu 12000000.iommu: nested translation [ 2.841222] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.848396] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.859132] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.861520] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.868082] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.875567] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.885725] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.888593] tegra_profiler: auth: init [ 2.892858] THERMAL EST: found 3 subdevs [ 2.895920] THERMAL EST num_resources: 0 [ 2.900018] [THERMAL EST subdev 0] [ 2.903090] [THERMAL EST subdev 1] [ 2.906753] [THERMAL EST subdev 2] [ 2.909773] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.916281] THERMAL EST: thz register success. [ 2.920457] THERMAL EST: end of probe, return err: 0 [ 2.925815] nvsciipc: loaded module [ 2.933005] tun: Universal TUN/TAP device driver, 1.6 [ 2.935227] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.941513] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.947359] e1000e: Intel(R) PRO/1000 Network Driver [ 2.951996] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.958072] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.963629] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.969752] PPP generic driver version 2.4.2 [ 2.974049] PPP BSD Compression module registered [ 2.978612] PPP Deflate Compression module registered [ 2.983880] PPP MPPE Compression module registered [ 2.988612] usbcore: registered new interface driver r8152 [ 2.994426] usbcore: registered new interface driver asix [ 2.999475] usbcore: registered new interface driver ax88179_178a [ 3.005864] usbcore: registered new interface driver cdc_ether [ 3.011552] usbcore: registered new interface driver net1080 [ 3.017414] usbcore: registered new interface driver cdc_subset [ 3.023449] usbcore: registered new interface driver zaurus [ 3.029144] usbcore: registered new interface driver cdc_ncm [ 3.034795] usbcore: registered new interface driver aqc111 [ 3.040173] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.046298] ohci-pci: OHCI PCI platform driver [ 3.050815] ohci-platform: OHCI generic platform driver [ 3.056604] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.063015] usbcore: registered new interface driver uas [ 3.066867] usbcore: registered new interface driver usb-storage [ 3.073274] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.079337] mousedev: PS/2 mouse device common for all mice [ 3.084043] usbcore: registered new interface driver xpad [ 3.092177] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.094739] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.102825] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.109134] i2c /dev entries driver [ 3.112430] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.118280] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.123588] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.128959] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.134560] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.140137] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.145498] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.160822] device-mapper: uevent: version 1.0.3 [ 3.161271] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.165740] cpuidle: Initializing cpuidle driver [ 3.169760] sdhci: Secure Digital Host Controller Interface driver [ 3.174387] sdhci: Copyright(c) Pierre Ossman [ 3.178456] Synopsys Designware Multimedia Card Interface Driver [ 3.184648] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.190672] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.191562] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.204205] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.227279] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.237278] vdd-1v0: supplied by regulator-dummy [ 3.242830] vdd-1v8-hs: supplied by regulator-dummy [ 3.247632] vdd-1v8-ls: supplied by regulator-dummy [ 3.252545] vdd-1v8-ao: supplied by regulator-dummy [ 3.256474] vddio-ddr-1v1: supplied by regulator-dummy [ 3.261044] vdd-rtc: supplied by regulator-dummy [ 3.262865] spmic-ldo1: supplied by regulator-dummy [ 3.264157] vdd-ao-3v3: supplied by regulator-dummy [ 3.270399] vddio-emmc-3v3: supplied by regulator-dummy [ 3.276676] spmic-ldo4: supplied by regulator-dummy [ 3.278076] vdd-usb-3v3: supplied by regulator-dummy [ 3.284348] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.290601] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.296266] spmic-ldo8: supplied by vdd-1v8-ls [ 3.297764] gpio-510 (gpio_default): hogged as output/high [ 3.299165] gpio-511 (gpio_default): hogged as output/high [ 3.302221] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.438369] max77686-rtc max77620-rtc: registered as rtc0 [ 3.439689] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.440044] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.307532] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.308758] hid: raw HID events driver (C) Jiri Kosina [ 4.309703] usbcore: registered new interface driver usbhid [ 4.309857] usbhid: USB HID core driver [ 4.312209] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.313881] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.371212] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.444677] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.778 ms, total boot 74.272 ms) ÿá[ 4.397631] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.398246] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.399471] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.400610] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.402696] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.403370] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.404119] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.405866] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.406076] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.409464] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.414026] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.420447] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.425366] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.432092] denver_knobs_init:MTS_VERSION:55637613 [ 4.444776] t19x_cache tegra-cache: probed [ 4.449450] optee: probing for conduit method. [ 4.450318] optee: revision 3.16 (65cc2218) [ 4.451689] optee: dynamic shared memory is enabled [ 4.453159] optee: initialized driver [ 4.460469] nvpmodel: initialized successfully [ 4.461311] tegra_hv: get_hvd: not initialized yet [ 4.464652] user_ivc_mempool: hypervisor not present [ 4.471132] usbcore: registered new interface driver snd-usb-audio [ 4.477085] u32 classifier [ 4.478328] input device check on [ 4.482055] Actions configured [ 4.485998] Initializing XFRM netlink socket [ 4.491018] NET: Registered protocol family 10 [ 4.498361] Segment Routing with IPv6 [ 4.498667] NET: Registered protocol family 17 [ 4.502420] NET: Registered protocol family 15 [ 4.506644] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.520263] Bluetooth: RFCOMM socket layer initialized [ 4.524916] Bluetooth: RFCOMM ver 1.11 [ 4.529069] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.534647] Bluetooth: HIDP socket layer initialized [ 4.540966] 9pnet: Installing 9P2000 support [ 4.544170] Key type dns_resolver registered [ 4.550187] registered taskstats version 1 [ 4.552782] Loading compiled-in X.509 certificates [ 4.565917] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.568609] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.578617] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.580469] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.589283] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.597385] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.715879] tegra194-pcie 14160000.pcie: Link up [ 4.719016] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.719324] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.719515] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.719741] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.720016] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.720397] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.720850] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.733597] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.734038] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.734496] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.736229] pci 0004:01:00.0: supports D1 D2 [ 4.736396] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.748242] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.748598] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.748817] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.749342] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.749652] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.749835] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.750388] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.757912] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.766607] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.777396] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.781244] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.786948] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.794022] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.803054] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.804395] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.813030] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.821485] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.936761] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.937553] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.937771] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.937922] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.938220] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.938441] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.938838] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.939328] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.954657] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.954989] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.957097] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.958513] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.960253] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.961662] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.962512] pci 0005:00:00.0: Removing from iommu group 7 [ 5.962782] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.994732] host1x 13e10000.host1x: Adding to iommu group 8 [ 6.020312] host1x 13e10000.host1x: initialized [ 6.022250] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 6.023168] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 6.024596] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 6.025431] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 6.026685] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 6.027443] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 6.028732] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 6.029446] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 6.030415] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 6.036760] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 6.047040] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 6.053769] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 6.064211] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 6.071080] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 6.080997] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 6.088168] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 6.097891] falcon 15340000.vic: Adding to iommu group 17 [ 6.112970] falcon 15340000.vic: initialized [ 6.113935] falcon 15380000.nvjpg: Adding to iommu group 17 [ 6.119468] falcon 15380000.nvjpg: initialized [ 6.120265] falcon 154c0000.nvenc: Adding to iommu group 17 [ 6.130413] falcon 154c0000.nvenc: initialized [ 6.131155] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 6.141940] falcon 15a80000.nvenc1: initialized [ 6.142652] nvdec 15480000.nvdec: Adding to iommu group 17 [ 6.153773] nvdec 15480000.nvdec: initialized [ 6.154420] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 6.164109] nvdec 15140000.nvdec1: initialized [ 6.164646] tsec 15500000.tsec: Adding to iommu group 18 [ 6.170459] tsec 15500000.tsec: initialized [ 6.170988] tsec 15100000.tsecb: Adding to iommu group 19 [ 6.178110] tsec 15100000.tsecb: initialized [ 6.182320] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.208677] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.222669] gpio-374 (wifi-enable): hogged as output/high [ 6.223024] gpio-431 (camera-control-output-low): hogged as output/low [ 6.223304] gpio-432 (camera-control-output-low): hogged as output/low [ 6.225150] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.227113] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.227612] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.229074] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.234698] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.240531] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.245660] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.254981] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.261697] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.273302] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.277972] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.283942] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.292957] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.302182] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.309484] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.317062] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.322981] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.332914] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.339168] pva 16000000.pva0: Adding to iommu group 22 [ 6.366637] pva 16000000.pva0: initialized [ 6.371704] pva 16800000.pva1: Adding to iommu group 23 [ 6.383574] pva 16800000.pva1: initialized [ 6.388364] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.402133] nvdla 15880000.nvdla0: initialized [ 6.403568] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.412369] nvdla 158c0000.nvdla1: initialized [ 6.414824] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.415108] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.415464] tegradccommon 15200000.display-hub: dma mapping done [ 6.417958] tegradc 15200000.display: Adding to iommu group 26 [ 6.426549] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.426903] generic_infoframe_type: 0x87 [ 6.427178] tegradc 15200000.display: DT parsed successfully [ 6.427541] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.429005] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.430545] tegradc 15210000.display: Adding to iommu group 26 [ 6.435140] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.441537] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.447330] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.455297] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.461668] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.469134] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.475267] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.484556] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.488902] tegra_cec 3960000.tegra_cec: probed [ 6.489863] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.494486] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.496258] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.507207] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.515649] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.522236] kfuse 3830000.kfuse: initialized [ 6.529624] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.536146] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.542216] tegradc 15210000.display: disp0 connected to head1->sor [ 6.546963] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.547890] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.554153] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.560827] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.566212] tegradc 15210000.display: DT parsed successfully [ 6.574000] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.579379] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.588918] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.617350] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.622834] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.643198] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.643559] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.646324] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.654494] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.662972] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.670020] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.677176] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.684373] usb usb1: Product: xHCI Host Controller [ 6.689556] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.695913] usb usb1: SerialNumber: 3610000.xhci [ 6.701391] hub 1-0:1.0: USB hub found [ 6.704258] hub 1-0:1.0: 4 ports detected [ 6.708953] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.713578] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.721429] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.729250] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.737039] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.743987] usb usb2: Product: xHCI Host Controller [ 6.749228] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.755478] usb usb2: SerialNumber: 3610000.xhci [ 6.760781] hub 2-0:1.0: USB hub found [ 6.763613] hub 2-0:1.0: 4 ports detected [ 6.767814] random: crng init done [ 6.809211] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.814757] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.816369] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.816564] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.829988] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 6.831071] tegra194-cpufreq ccplex: probed with BWMGR [ 6.832293] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.832805] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.833211] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.834415] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.842319] mmc0: CQHCI version 5.10 [ 6.842323] tegra194-vi5 15c10000.vi: initialized [ 6.846228] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.847688] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.851244] generic_infoframe_type: 0x87 [ 6.857432] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.861409] tegradc 15200000.display: DT parsed successfully [ 6.869465] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.869474] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.869479] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.869511] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.875029] tegradc 15200000.display: Display dc.00000000f1187ee3 registered with id=0 [ 6.894650] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.901874] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.907143] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.908940] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.908948] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.945376] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.946403] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.953565] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.967809] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.969542] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.975503] nvethernet 2490000.ethernet: Macsec not supported [ 6.976926] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.981899] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.988631] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.995925] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 7.002077] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 7.025437] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.026191] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 7.032494] mmc0: Command Queue Engine enabled [ 7.036285] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 7.038131] tegra-se-nvhost 15810000.se: initialized [ 7.039560] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 7.044012] mmc0: periodic cache flush enabled [ 7.049062] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 7.049364] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 7.050340] tegra-se-nvhost 15820000.se: initialized [ 7.060306] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 7.060310] ************************************** [ 7.060313] CPU:0, Error:cbb-noc [ 7.060316] Error Logger : 0 [ 7.060325] ErrLog0 : 0x80030000 [ 7.060348] Transaction Type : RD - Read, Incrementing [ 7.060350] Error Code : SLV [ 7.060353] Error Source : Target [ 7.060355] Error Description : Target error detected by CBB slave [ 7.060366] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 7.060377] Packet header Lock : 0 [ 7.060379] Packet header Len1 : 3 [ 7.060382] NOC protocol version : version >= 2.7 [ 7.060385] ErrLog1 : 0x35242e [ 7.060387] ErrLog2 : 0x0 [ 7.060408] RouteId : 0x35242e [ 7.060414] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 7.060423] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 7.061231] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 7.061359] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 7.064603] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 7.066658] Targflow : host1x_p2pm/T/host1x_p2pm [ 7.066670] TargSubRange : 18 [ 7.073705] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 7.079423] SeqId : 0 [ 7.079427] ErrLog3 : 0x4045c [ 7.079430] ErrLog4 : 0x0 [ 7.079435] Address accessed : 0x15b4045c [ 7.079457] ErrLog5 : 0xb89f851 [ 7.213039] Non-Modify : 0x1 [ 7.216450] AXI ID : 0x17 [ 7.219598] Master ID : CCPLEX [ 7.222753] Security Group(GRPSEC): 0x7e [ 7.227036] Cache : 0x1 -- Bufferable [ 7.231061] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 7.237711] FALCONSEC : 0x0 [ 7.240603] Virtual Queuing Channel(VQC): 0x0 [ 7.245329] ************************************** [ 7.250194] ------------[ cut here ]------------ [ 7.255124] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 7.261601] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.266507] Modules linked in: [ 7.269740] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 7.276129] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.288382] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.294425] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.299159] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.304122] sp : ffff800010003de0 [ 7.307285] x29: ffff800010003de0 x28: 0000000000000001 [ 7.312964] x27: 0000000000000005 x26: ffffbbfd30c53f58 [ 7.318386] x25: ffffbbfd315ace10 x24: 0000000000000001 [ 7.323554] x23: ffffbbfd30f47000 x22: ffffbbfd313cea00 [ 7.328891] x21: 000000000000000f x20: ffff1edc00e66780 [ 7.334661] x19: ffffbbfd313cea00 x18: 0000000000000010 [ 7.339829] x17: ffff800010895000 x16: 0000000000000068 [ 7.345167] x15: ffffbbfd31242bf0 x14: 0720072007200720 [ 7.350679] x13: 0720072007200720 x12: 0720072007200720 [ 7.356449] x11: 0720072007200720 x10: 0720072007200720 [ 7.361965] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.367218] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.372748] x5 : 0000000000057fa8 x4 : ffffbbfd31257968 [ 7.378411] x3 : 00000000ffffffff x2 : ffffbbfd2f6ee090 [ 7.383768] x1 : ffffbbfd31242680 x0 : 0000000100010001 [ 7.388827] Call trace: [ 7.391540] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.395829] __handle_irq_event_percpu+0x68/0x2a0 [ 7.400377] handle_irq_event_percpu+0x40/0xa0 [ 7.404839] handle_irq_event+0x50/0xf0 [ 7.408601] handle_fasteoi_irq+0xc0/0x170 [ 7.412645] generic_handle_irq+0x40/0x60 [ 7.416393] __handle_domain_irq+0x70/0xd0 [ 7.420594] efi_header_end+0xb0/0xf0 [ 7.424368] el1_irq+0xd0/0x180 [ 7.427328] cpuidle_enter_state+0xb8/0x410 [ 7.431525] cpuidle_enter+0x40/0x60 [ 7.435025] call_cpuidle+0x44/0x80 [ 7.438526] do_idle+0x208/0x270 [ 7.441937] cpu_startup_entry+0x30/0x70 [ 7.445446] rest_init+0xdc/0xe8 [ 7.448684] arch_call_rest_init+0x18/0x20 [ 7.452880] start_kernel+0x514/0x54c [ 7.456488] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.462682] ---[ end trace 703d8a42659246c3 ]--- [ 7.467399] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.474925] SMP: stopping secondary CPUs [ 7.478536] Kernel Offset: 0x3bfd1f530000 from 0xffff800010000000 [ 7.484898] PHYS_OFFSET: 0xffffe12500000000 [ 7.489011] CPU features: 0x8240002,03802a30 [ 7.493216] Memory Limit: none [ 7.496371] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 67000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.126] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.134] I> Boot-device: QSPI (instance: 0) [0000.138] I> Qspi flash params source = mb1bct [0000.142] I> Qspi clock source : pllc_out0 [0000.146] I> Qspi-0 reinitialized [0000.149] I> Qspi flash params source = mb1bct [0000.162] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.169] W> Thermal config not found in BCT [0000.177] W> MEMIO rail config not found in BCT [0000.187] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.306] I> sdmmc DDR50 mode [0001.324] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.341] W> Cannot find any partition table for 00000003 [0001.342] > PARTITION_MANAGER: Failed to publish partition. [0001.358] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.359] I> Active Boot chain : 0 [0002.030] I> Relocating BR-BCT [0002.032] > DEVICE_PROD: device prod is not initialized. [0002.337] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.338] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.339] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.339] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.339] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.340] I> dram_block larger than 80000000 [0002.342] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.354] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.357] I> found decompressor handler: lz4 [0002.586] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.588] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: Nÿâmail_early initialized ÿäoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized ÿäTÿâfmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Aug ÿâclk_dt_late initialized ÿä1ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä 03ÿâdmce initialized ÿä:ÿâcvc initialized ÿä23:20 UTC 20ÿâavfs_clk_mach_post initialized ÿä22 aÿâavfs_clk_platform_post initialized ÿäarcÿâcvc_late initialized regulator_post initialized ÿäh64 ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.207] I> Welcome to NVDisp-Init [0003.208] I> NVDisp-Init version: t194-f9ecfedc [0003.208] I> CPU-BL Params @ 0xca020000 [0003.208] I> 0) Base:0x00000000 Size:0x00000000 [0003.209] I> 1) Base:0xc8300000 Size:0x00100000 [0003.209] I> 2) Base:0xc9800000 Size:0x00200000 [0003.209] I> 3) Base:0xc8600000 Size:0x00200000 [0003.212] I> 4) Base:0xc8200000 Size:0x00100000 [0003.216] I> 5) Base:0xc8100000 Size:0x00100000 [0003.221] I> 6) Base:0xc9400000 Size:0x00400000 [0003.225] I> 7) Base:0xc9000000 Size:0x00400000 [0003.230] I> 8) Base:0xc8000000 Size:0x00100000 [0003.234] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.239] I> 10) Base:0xca800000 Size:0x00800000 [0003.243] I> 11) Base:0x40000000 Size:0x00040000 [0003.247] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.252] I> 13) Base:0x40046000 Size:0x00002000 [0003.256] I> 14) Base:0x40048000 Size:0x00002000 [0003.261] I> 15) Base:0xaf000000 Size:0x00004000 [0003.265] I> 16) Base:0x4004a000 Size:0x00002000 [0003.270] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.274] I> 18) Base:0x4004c000 Size:0x00002000 [0003.279] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.283] I> 20) Base:0x4004e000 Size:0x00002000 [0003.288] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.292] I> 22) Base:0x00000000 Size:0x00000000 [0003.297] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.301] I> 24) Base:0xcc000000 Size:0x02000000 [0003.305] I> 25) Base:0x40050000 Size:0x00002000 [0003.310] I> 26) Base:0x40040000 Size:0x00006000 [0003.314] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.319] I> 28) Base:0xc8400000 Size:0x00200000 [0003.323] I> 29) Base:0xc8800000 Size:0x00400000 [0003.328] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.332] I> 31) Base:0x00000000 Size:0x00000000 [0003.337] I> 32) Base:0xf8000000 Size:0x08000000 [0003.341] I> 33) Base:0xce000000 Size:0x2a000000 [0003.346] I> 34) Base:0xcb000000 Size:0x01000000 [0003.350] I> 35) Base:0xae000000 Size:0x01000000 [0003.355] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.359] I> 37) Base:0xca000000 Size:0x00800000 [0003.363] I> 38) Base:0x80000000 Size:0x20000000 [0003.368] I> 39) Base:0xb0000000 Size:0x08000000 [0003.372] I> 40) Base:0x00000000 Size:0x00000000 [0003.377] I> 41) Base:0x00000000 Size:0x00000000 [0003.381] I> 42) Base:0x00000000 Size:0x00000000 [0003.386] I> 43) Base:0x00000000 Size:0x00000000 [0003.390] I> 44) Base:0x00000000 Size:0x00000000 [0003.395] I> 45) Base:0x00000000 Size:0x00000000 [0003.399] GIC-SPI Target CPU: 0 [0003.402] Interrupts Init done [0003.405] calling constructors [0003.408] initializing heap [0003.411] I> Heap: [0xa0960000 ... 0xadf00000] [0003.415] initializing threads [0003.418] initializing timers [0003.421] creating bootstrap completion thread [0003.425] top of bootstrap2() [0003.428] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.432] initializing platform [0003.435] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.441] W> device prod register failed [0003.444] I> Bl_dtb @0xadf00000 [0003.447] I> gpio framework initialized [0003.459] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.464] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.470] I> fixed regulator driver initialized [0003.486] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.488] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.489] I> Boot-device: QSPI [0003.492] I> Boot_device: QSPI_FLASH instance: 0 [0003.496] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.507] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.514] I> QSPI source rate = 204000 Khz [0003.517] I> Requested rate for QSPI clock = 34000 Khz [0003.522] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.527] I> tx_clk_tap_delay : 0 [0003.530] I> rx_clk_tap_delay : 16 [0003.533] I> QSPI Flash Size = 32 MB [0003.541] I> Qspi initialized successfully [0003.541] I> qspi flash-0 params source = boot args [0003.546] W> No board IDs available [0003.549] E> Failed to get board id info! [0003.554] I> sdmmc-3 params source = safe params [0003.562] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.563] W> Cannot find any partition table for 00000003 [0003.568] E> Failed to publish 00000003 [0003.572] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> regulator 'vdd-hdmi-5v0' already enabled [0003.600] I> hdmi cable connected [0003.606] W> set volts not configured for 'vdd-1v0' [0003.611] W> set volts not configured for 'vdd-1v8-hs' [0003.612] I> retrieved tmds range from prod_list_hdmi_soc [0003.617] E> invalid display type [0003.618] E> cannot find any other nvdisp nodes [0003.634] I> edid read success [0003.647] I> edid read success [0003.647] I> width = 640, height = 480, frequency = 25174825 [0003.648] I> width = 1920, height = 1080, frequency = 148500000 [0003.648] I> width = 1280, height = 768, frequency = 79500000 [0003.648] I> width = 1360, height = 768, frequency = 85500000 [0003.649] I> width = 720, height = 480, frequency = 26973026 [0003.653] I> width = 720, height = 576, frequency = 26973026 [0003.658] I> width = 1280, height = 720, frequency = 74175824 [0003.664] I> width = 1280, height = 720, frequency = 74175824 [0003.669] I> width = 1920, height = 1080, frequency = 148351648 [0003.675] I> width = 1920, height = 1080, frequency = 148351648 [0003.681] I> width = 720, height = 480, frequency = 26973026 [0003.687] I> width = 720, height = 576, frequency = 26973026 [0003.692] I> width = 3840, height = 2160, frequency = 296703296 [0003.698] I> width = 3840, height = 2160, frequency = 296703296 [0003.704] I> width = 3840, height = 2160, frequency = 296703296 [0003.709] I> width = 3840, height = 2160, frequency = 296703296 [0003.715] I> width = 4096, height = 2160, frequency = 296703296 [0003.721] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.732] I> hdmi_enable, starting HDMI initialisation [0003.737] I> hdmi_enable, HDMI initialisation complete [0003.746] initializing target [0003.747] calling apps_init() [0003.748] starting app kernel_boot_app [0003.748] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943e018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x25943ff18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6932996K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475320K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000637] Console: colour dummy device 80x25 [ 0.002197] printk: console [tty0] enabled [ 0.002258] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002294] pid_max: default: 32768 minimum: 301 [ 0.002497] LSM: Security Framework initializing [ 0.002574] Yama: becoming mindful. [ 0.002641] SELinux: Initializing. [ 0.002785] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002819] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.005686] rcu: Hierarchical SRCU implementation. [ 0.005939] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.006793] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.006829] DTB Build time: Aug 10 2022 20:31:49 [ 0.009736] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.009964] Remapping and enabling EFI services. [ 0.011782] smp: Bringing up secondary CPUs ... [ 0.040932] Detected PIPT I-cache on CPU1 [ 0.041009] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.071050] Detected PIPT I-cache on CPU2 [ 0.071128] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.100819] Detected PIPT I-cache on CPU3 [ 0.100889] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.130596] Detected PIPT I-cache on CPU4 [ 0.130673] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.160388] Detected PIPT I-cache on CPU5 [ 0.160457] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.160855] smp: Brought up 1 node, 6 CPUs [ 0.161037] SMP: Total of 6 processors activated. [ 0.161093] CPU features: detected: Privileged Access Never [ 0.161132] CPU features: detected: LSE atomic instructions [ 0.161146] CPU features: detected: User Access Override [ 0.161159] CPU features: detected: 32-bit EL0 Support [ 0.161172] CPU features: detected: RAS Extension Support [ 0.161184] CPU features: detected: CRC32 instructions [ 0.161196] CPU features: detected: 32-bit EL1 Support [ 0.232155] CPU: All CPU(s) started at EL2 [ 0.237570] devtmpfs: initialized [ 0.289453] Registered cp15_barrier emulation handler [ 0.289579] Registered setend emulation handler [ 0.289620] KASLR enabled [ 0.289907] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.289936] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.291507] pinctrl core: initialized pinctrl subsystem [ 0.292498] SMBIOS 3.0.0 present. [ 0.292528] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.293082] NET: Registered protocol family 16 [ 0.295163] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.295680] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.296409] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.296493] audit: initializing netlink subsys (disabled) [ 0.296823] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.297188] thermal_sys: Registered thermal governor 'step_wise' [ 0.297195] thermal_sys: Registered thermal governor 'power_allocator' [ 0.297212] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299270] cpuidle: using governor menu [ 0.299638] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300128] ASID allocator initialised with 32768 entries [ 0.300354] Serial: AMBA PL011 UART driver [ 0.303857] Tegra reboot handler registered. [ 0.371299] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.371498] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.371747] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.371811] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.371966] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.372012] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.372155] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.372204] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.372386] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.372430] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.374796] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.374833] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.374864] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.374913] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.374946] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.375018] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.375061] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.375115] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.375143] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.375169] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.375195] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.375221] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.375247] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.375272] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.375302] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.375328] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.375353] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.375446] mc-err: mcerr ops are set to t19x [ 0.387735] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.387760] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.387778] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.387791] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.395165] ACPI: Interpreter disabled. [ 0.396413] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.397916] iommu: Default domain type: Translated [ 0.397989] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.398339] SCSI subsystem initialized [ 0.398537] usbcore: registered new interface driver usbfs [ 0.398579] usbcore: registered new interface driver hub [ 0.398633] usbcore: registered new device driver usb [ 0.399094] mc: Linux media interface: v0.10 [ 0.399122] videodev: Linux video capture interface: v2.00 [ 0.399586] pps_core: LinuxPPS API ver. 1 registered [ 0.399600] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.399624] PTP clock support registered [ 0.399868] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.400233] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.400325] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.401246] Registered efivars operations [ 0.406505] FPGA manager framework [ 0.406629] Advanced Linux Sound Architecture Driver Initialized. [ 0.407267] Bluetooth: Core ver 2.22 [ 0.407307] NET: Registered protocol family 31 [ 0.407319] Bluetooth: HCI device and connection manager initialized [ 0.407335] Bluetooth: HCI socket layer initialized [ 0.407351] Bluetooth: L2CAP socket layer initialized [ 0.407373] Bluetooth: SCO socket layer initialized [ 0.409116] camchar: rtcpu character device driver loaded [ 0.409908] clocksource: Switched to clocksource arch_sys_counter [ 0.707162] VFS: Disk quotas dquot_6.6.0 [ 0.707244] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.707663] pnp: PnP ACPI: disabled [ 0.720073] la/ptsa driver initialized. [ 0.720199] NET: Registered protocol family 2 [ 0.720388] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.725545] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.725619] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.725943] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.726381] TCP: Hash tables configured (established 65536 bind 65536) [ 0.726513] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.726603] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.726851] NET: Registered protocol family 1 [ 0.727474] RPC: Registered named UNIX socket transport module. [ 0.727489] RPC: Registered udp transport module. [ 0.727500] RPC: Registered tcp transport module. [ 0.727510] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.727532] PCI: CLS 0 bytes, default 64 [ 0.727749] Trying to unpack rootfs image as initramfs... [ 0.926347] Initramfs unpacking failed: invalid magic at start of compressed archive [ 0.928396] Freeing initrd memory: 8196K [ 0.932717] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 0.932767] hw perfevents: /arm-pmu: failed to register PMU devices! [ 0.932863] armv8-pmu: probe of arm-pmu failed with error -22 [ 0.933273] kvm [1]: IPA Size Limit: 40 bits [ 0.934009] kvm [1]: vgic interrupt IRQ9 [ 0.934547] kvm [1]: VHE mode initialized successfully [ 0.935993] Initialise system trusted keyrings [ 0.936290] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.940855] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.941556] NFS: Registering the id_resolver key type [ 0.941586] Key type id_resolver registered [ 0.941599] Key type id_legacy registered [ 0.941666] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.941689] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.941724] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.949223] NET: Registered protocol family 38 [ 0.949248] Key type asymmetric registered [ 0.949276] Asymmetric key parser 'x509' registered [ 0.949335] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 0.949519] io scheduler mq-deadline registered [ 0.949536] io scheduler kyber registered [ 0.954246] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 0.956448] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 0.956533] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 0.956595] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 0.956653] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 0.956712] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 0.960808] scrncapt: init (heads:4 wins:6 planes:4) [ 0.960837] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 0.961650] EINJ: ACPI disabled. [ 0.964201] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 0.964224] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 0.964238] tegra-pmc: ### PMC reset level: L1 [ 0.964250] tegra-pmc: ### PMC reset status reg: 0x9 [ 0.964290] tegra-pmc: PMC Prod config success [ 0.968932] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.973165] random: fast init done [ 0.973270] printk: console [ttyTCU0] enabled [ 2.525802] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.530217] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.534702] arm-smmu 10000000.iommu: stage 1 translation [ 2.540366] arm-smmu 10000000.iommu: stage 2 translation [ 2.545772] arm-smmu 10000000.iommu: nested translation [ 2.550851] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.558281] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.569408] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.571406] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.578221] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.586078] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.591004] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.595724] arm-smmu 12000000.iommu: stage 1 translation [ 2.601499] arm-smmu 12000000.iommu: stage 2 translation [ 2.606659] arm-smmu 12000000.iommu: nested translation [ 2.612343] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.619270] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.630358] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.632365] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.639212] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.646484] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.656244] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.659376] tegra_profiler: auth: init [ 2.663902] THERMAL EST: found 3 subdevs [ 2.667053] THERMAL EST num_resources: 0 [ 2.671142] [THERMAL EST subdev 0] [ 2.674466] [THERMAL EST subdev 1] [ 2.677857] [THERMAL EST subdev 2] [ 2.680869] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.687620] THERMAL EST: thz register success. [ 2.691568] THERMAL EST: end of probe, return err: 0 [ 2.697178] nvsciipc: loaded module [ 2.704564] tun: Universal TUN/TAP device driver, 1.6 [ 2.706743] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.712880] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.718452] e1000e: Intel(R) PRO/1000 Network Driver [ 2.723133] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.729204] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.734496] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.740970] PPP generic driver version 2.4.2 [ 2.745224] PPP BSD Compression module registered [ 2.749735] PPP Deflate Compression module registered [ 2.754984] PPP MPPE Compression module registered [ 2.760002] usbcore: registered new interface driver r8152 [ 2.765525] usbcore: registered new interface driver asix [ 2.770587] usbcore: registered new interface driver ax88179_178a [ 2.776958] usbcore: registered new interface driver cdc_ether [ 2.782659] usbcore: registered new interface driver net1080 [ 2.788554] usbcore: registered new interface driver cdc_subset [ 2.794318] usbcore: registered new interface driver zaurus [ 2.800023] usbcore: registered new interface driver cdc_ncm [ 2.805687] usbcore: registered new interface driver aqc111 [ 2.811607] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.817401] ohci-pci: OHCI PCI platform driver [ 2.821985] ohci-platform: OHCI generic platform driver [ 2.827852] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 2.833787] usbcore: registered new interface driver uas [ 2.837998] usbcore: registered new interface driver usb-storage [ 2.844196] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.850406] mousedev: PS/2 mouse device common for all mice [ 2.855129] usbcore: registered new interface driver xpad [ 2.863516] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.866116] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.873655] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.880280] i2c /dev entries driver [ 2.883828] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.889327] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.894915] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.900344] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.905837] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.911001] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.916408] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.928495] device-mapper: uevent: version 1.0.3 [ 2.928875] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.936652] cpuidle: Initializing cpuidle driver [ 2.940650] sdhci: Secure Digital Host Controller Interface driver [ 2.945735] sdhci: Copyright(c) Pierre Ossman [ 2.949844] Synopsys Designware Multimedia Card Interface Driver [ 2.955753] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.961965] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.962590] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.975030] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.993941] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.002489] vdd-1v0: supplied by regulator-dummy [ 3.007878] vdd-1v8-hs: supplied by regulator-dummy [ 3.012591] vdd-1v8-ls: supplied by regulator-dummy [ 3.017241] vdd-1v8-ao: supplied by regulator-dummy [ 3.020972] vddio-ddr-1v1: supplied by regulator-dummy [ 3.025283] vdd-rtc: supplied by regulator-dummy [ 3.026866] spmic-ldo1: supplied by regulator-dummy [ 3.028008] vdd-ao-3v3: supplied by regulator-dummy [ 3.034044] vddio-emmc-3v3: supplied by regulator-dummy [ 3.040181] spmic-ldo4: supplied by regulator-dummy [ 3.041312] vdd-usb-3v3: supplied by regulator-dummy [ 3.047334] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.053343] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.058735] spmic-ldo8: supplied by vdd-1v8-ls [ 3.060082] gpio-510 (gpio_default): hogged as output/high [ 3.061705] gpio-511 (gpio_default): hogged as output/high [ 3.068576] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.207093] max77686-rtc max77620-rtc: registered as rtc0 [ 3.208060] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.208353] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.914537] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.915529] hid: raw HID events driver (C) Jiri Kosina [ 3.916210] usbcore: registered new interface driver usbhid [ 3.916370] usbhid: USB HID core driver [ 3.918120] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.919307] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.685830] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.761254] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.781 ms, total boot 76.234 ms) ÿá[ 4.004625] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.005328] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.006621] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.007452] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.009167] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.009771] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.010404] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.011642] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.012093] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.014158] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.021148] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.027054] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.032112] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.038667] denver_knobs_init:MTS_VERSION:55637613 [ 4.052053] t19x_cache tegra-cache: probed [ 4.054972] optee: probing for conduit method. [ 4.055849] optee: revision 3.16 (65cc2218) [ 4.056838] optee: dynamic shared memory is enabled [ 4.059389] optee: initialized driver [ 4.066346] nvpmodel: initialized successfully [ 4.066892] tegra_hv: get_hvd: not initialized yet [ 4.071873] user_ivc_mempool: hypervisor not present [ 4.077858] usbcore: registered new interface driver snd-usb-audio [ 4.084146] u32 classifier [ 4.085348] input device check on [ 4.089174] Actions configured [ 4.092936] Initializing XFRM netlink socket [ 4.097782] NET: Registered protocol family 10 [ 4.103798] Segment Routing with IPv6 [ 4.104942] NET: Registered protocol family 17 [ 4.109233] NET: Registered protocol family 15 [ 4.113707] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.127277] Bluetooth: RFCOMM socket layer initialized [ 4.132180] Bluetooth: RFCOMM ver 1.11 [ 4.135810] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.142029] Bluetooth: HIDP socket layer initialized [ 4.147354] 9pnet: Installing 9P2000 support [ 4.151335] Key type dns_resolver registered [ 4.156533] registered taskstats version 1 [ 4.159572] Loading compiled-in X.509 certificates [ 4.171283] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.175474] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.185133] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.187736] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.196019] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.204712] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.321989] tegra194-pcie 14160000.pcie: Link up [ 4.324807] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.324999] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.325121] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.325341] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.325499] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.325826] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.326282] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.338537] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.339016] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.339471] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.340870] pci 0004:01:00.0: supports D1 D2 [ 4.341016] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.350566] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.350870] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.351124] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.351470] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.351716] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.351965] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.356658] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.363980] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.372903] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.382847] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.387686] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.392793] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.399620] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.408460] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.410677] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.418937] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.427736] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.534040] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.534692] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.534886] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.535078] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.535277] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.535477] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.535795] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.536180] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.553493] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.554140] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.556332] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.557880] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.559554] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.561233] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.562229] pci 0005:00:00.0: Removing from iommu group 7 [ 5.562470] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.592497] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.614531] host1x 13e10000.host1x: initialized [ 5.616104] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.617015] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.618069] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.618697] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.619602] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.620222] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.621172] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.621741] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.627436] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.634258] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.644032] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.651019] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.661266] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.668257] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.678182] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.685168] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.695026] falcon 15340000.vic: Adding to iommu group 17 [ 5.708884] falcon 15340000.vic: initialized [ 5.710003] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.715279] falcon 15380000.nvjpg: initialized [ 5.715899] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.728288] falcon 154c0000.nvenc: initialized [ 5.728804] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.737887] falcon 15a80000.nvenc1: initialized [ 5.738445] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.749473] nvdec 15480000.nvdec: initialized [ 5.750135] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.759694] nvdec 15140000.nvdec1: initialized [ 5.760250] tsec 15500000.tsec: Adding to iommu group 18 [ 5.765688] tsec 15500000.tsec: initialized [ 5.766246] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.775536] tsec 15100000.tsecb: initialized [ 5.780216] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.813373] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.826381] gpio-374 (wifi-enable): hogged as output/high [ 5.826705] gpio-431 (camera-control-output-low): hogged as output/low [ 5.826958] gpio-432 (camera-control-output-low): hogged as output/low [ 5.828615] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.830246] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.830759] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.832237] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.833302] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.837530] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.842879] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.851170] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.858492] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.869723] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.875125] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.881091] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.889954] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.899382] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.906447] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.914276] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.920256] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.929827] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.936148] pva 16000000.pva0: Adding to iommu group 22 [ 5.963061] pva 16000000.pva0: initialized [ 5.968208] pva 16800000.pva1: Adding to iommu group 23 [ 5.986431] pva 16800000.pva1: initialized [ 5.990468] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.002820] nvdla 15880000.nvdla0: initialized [ 6.004111] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.012360] nvdla 158c0000.nvdla1: initialized [ 6.014572] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.014788] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.015055] tegradccommon 15200000.display-hub: dma mapping done [ 6.016789] tegradc 15200000.display: Adding to iommu group 26 [ 6.023894] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.024201] generic_infoframe_type: 0x87 [ 6.024418] tegradc 15200000.display: DT parsed successfully [ 6.024699] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.026898] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.028751] tegradc 15210000.display: Adding to iommu group 26 [ 6.032658] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.045196] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.050087] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.050720] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.058136] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.064213] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.072207] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.085937] tegra_cec 3960000.tegra_cec: probed [ 6.086204] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.091395] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.096484] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.109092] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.110866] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.126225] kfuse 3830000.kfuse: initialized [ 6.130709] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.131178] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.143766] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.143955] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.150671] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.159246] tegradc 15210000.display: disp0 connected to head1->sor [ 6.163817] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.169357] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.179732] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.185403] tegradc 15210000.display: DT parsed successfully [ 6.191940] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.196806] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.215114] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.220343] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.240353] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.240663] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.243623] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.251546] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.260251] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.266783] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.274338] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.281589] usb usb1: Product: xHCI Host Controller [ 6.286590] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.292857] usb usb1: SerialNumber: 3610000.xhci [ 6.298468] hub 1-0:1.0: USB hub found [ 6.301807] hub 1-0:1.0: 4 ports detected [ 6.306611] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.310827] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.318695] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.326463] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.334106] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.341523] usb usb2: Product: xHCI Host Controller [ 6.346241] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.352502] usb usb2: SerialNumber: 3610000.xhci [ 6.358644] hub 2-0:1.0: USB hub found [ 6.361153] hub 2-0:1.0: 4 ports detected [ 6.403370] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.409058] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.410592] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.410794] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.423939] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1905000 KHz, changing to: 1907200 KHz [ 6.424970] tegra194-cpufreq ccplex: probed with BWMGR [ 6.426265] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.426972] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.427476] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.428881] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.437290] tegra194-vi5 15c10000.vi: initialized [ 6.438645] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.440218] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.441068] generic_infoframe_type: 0x87 [ 6.441103] tegradc 15200000.display: DT parsed successfully [ 6.447564] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.451346] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.451595] mmc0: CQHCI version 5.10 [ 6.457078] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.465920] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.473022] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.476763] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.476773] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.483340] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.486106] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.491915] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.498380] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.506001] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.506524] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.514597] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.521047] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.528669] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.535903] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.543127] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.547910] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.558330] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.560403] ************************************** [ 6.560414] CPU:0, Error:cbb-noc [ 6.578165] Error Logger : 0 [ 6.578180] ErrLog0 : 0x80030000 [ 6.578190] Transaction Type : RD - Read, Incrementing [ 6.585533] nvethernet 2490000.ethernet: Macsec not supported [ 6.593386] Error Code : SLV [ 6.593390] Error Source : Target [ 6.593394] Error Description : Target error detected by CBB slave [ 6.593409] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.652639] Packet header Lock : 0 [ 6.656041] Packet header Len1 : 3 [ 6.659799] NOC protocol version : version >= 2.7 [ 6.664529] ErrLog1 : 0x352428 [ 6.667853] ErrLog2 : 0x0 [ 6.670997] RouteId : 0x352428 [ 6.674409] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.678965] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.683691] TargSubRange : 18 [ 6.686927] SeqId : 0 [ 6.689827] ErrLog3 : 0x4045c [ 6.693231] ErrLog4 : 0x0 [ 6.696388] Address accessed : 0x15b4045c [ 6.700578] ErrLog5 : 0xa09f851 [ 6.703815] Non-Modify : 0x1 [ 6.707485] AXI ID : 0x14 [ 6.710378] Master ID : CCPLEX [ 6.713704] Security Group(GRPSEC): 0x7e [ 6.717905] Cache : 0x1 -- Bufferable [ 6.722360] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.728928] FALCONSEC : 0x0 [ 6.732336] Virtual Queuing Channel(VQC): 0x0 [ 6.736974] ************************************** [ 6.741762] ------------[ cut here ]------------ [ 6.746511] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.753074] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 6.758068] Modules linked in: [ 6.761055] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.104-tegra #1 [ 6.767948] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 6.779960] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 6.785985] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 6.790705] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 6.795684] sp : ffff800010003de0 [ 6.798840] x29: ffff800010003de0 x28: 0000000000000001 [ 6.804523] x27: 0000000000000005 x26: ffffd91d51ef3f58 [ 6.809691] x25: ffffd91d5284ce10 x24: 0000000000000001 [ 6.815372] x23: ffffd91d521e7000 x22: ffffd91d5266ea00 [ 6.820454] x21: 000000000000000f x20: ffff55ea80ea4b80 [ 6.826227] x19: ffffd91d5266ea00 x18: 0000000000000010 [ 6.831391] x17: ffffd91d51f9d008 x16: 00000000bbae2815 [ 6.837000] x15: ffffd91d524e2bf0 x14: 0720072007200720 [ 6.842242] x13: 0720072007200720 x12: 0720072007200720 [ 6.848010] x11: 0720072007200720 x10: 0720072007200720 [ 6.853525] x9 : 0720072007200720 x8 : 07200720072a072a [ 6.859038] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 6.864293] x5 : 0000000000057fa8 x4 : ffffd91d524f7968 [ 6.869727] x3 : 00000000ffffffff x2 : ffffd91d5098e090 [ 6.875310] x1 : ffffd91d524e2680 x0 : 0000000000010001 [ 6.880648] Call trace: [ 6.882844] tegra194_cbb_err_isr+0x190/0x1b0 [ 6.887135] __handle_irq_event_percpu+0x68/0x2a0 [ 6.891939] handle_irq_event_percpu+0x40/0xa0 [ 6.896401] handle_irq_event+0x50/0xf0 [ 6.899907] handle_fasteoi_irq+0xc0/0x170 [ 6.904188] generic_handle_irq+0x40/0x60 [ 6.908212] __handle_domain_irq+0x70/0xd0 [ 6.912157] efi_header_end+0xb0/0xf0 [ 6.915912] el1_irq+0xd0/0x180 [ 6.918889] cpuidle_enter_state+0xb8/0x410 [ 6.923086] cpuidle_enter+0x40/0x60 [ 6.926332] call_cpuidle+0x44/0x80 [ 6.929830] do_idle+0x208/0x270 [ 6.933244] cpu_startup_entry+0x2c/0x70 [ 6.937265] rest_init+0xdc/0xe8 [ 6.940504] arch_call_rest_init+0x18/0x20 [ 6.944701] start_kernel+0x514/0x54c [ 6.947776] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 6.954245] ---[ end trace cb55fab58b12c97b ]--- [ 6.958961] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 6.966487] SMP: stopping secondary CPUs [ 6.970358] Kernel Offset: 0x591d407d0000 from 0xffff800010000000 [ 6.976460] PHYS_OFFSET: 0xffffaa1680000000 [ 6.980322] CPU features: 0x8240002,03802a30 [ 6.984777] Memory Limit: none [ 6.987934] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 65500 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.797] I> Qspi flash params source = mb1bct [0000.814] I> Qspi flash params source = mb1bct [0000.853] W> Platform config not found in BCT [0000.880] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.916] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.917] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.926] I> gpio framework initialized [0000.930] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.937] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.945] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.959] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.030] > DEVICE_PROD: device prod is not initialized. [0002.336] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.337] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.337] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.338] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.338] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.339] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.352] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.356] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.586] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/Tÿâclk_early initialized ÿäC: Nÿâmail_early initialized ÿäonÿâfuse initialized hwwdt initialized ÿä-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externaÿâec initialized ÿälÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿä DTÿâadc initialized fmon_populate_monitors: found 73 monitors ÿä found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Augÿâclk_dt_late initialized ÿä ÿânoc_late initialized ÿä1ÿâpm_post initialized dbells initialized ÿä1 0ÿâdmce initialized cvc initialized ÿä3:23:20 UTC 2ÿâavfs_clk_mach_post initialized ÿä022 ÿâavfs_clk_platform_post initialized ÿäaarÿâcvc_late initialized regulator_post initialized ÿäch64ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä I/TC: WARNINGÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿä: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.205] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.206] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.207] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.214] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.245] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.254] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.263] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.272] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.312] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.321] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.330] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.339] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.370] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.379] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.388] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.397] GIC-SPI Target CPU: 0 [0003.400] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.430] initializing platform [0003.433] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.442] I> Bl_dtb @0xadf00000 [0003.445] I> gpio framework initialized [0003.456] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.461] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.468] I> fixed regulator driver initialized [0003.485] I> register 'maxim' power off handle [0003.488] I> virtual i2c enabled [0003.489] I> registered 'maxim,max20024' pmic [0003.489] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.490] I> Boot-device: QSPI [0003.490] I> Boot_device: QSPI_FLASH instance: 0 [0003.494] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.520] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.531] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.539] I> qspi flash-0 params source = boot args [0003.544] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.552] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.561] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.593] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> regulator 'vdd-hdmi-5v0' already enabled [0003.601] I> hdmi cable connected [0003.608] W> set volts not configured for 'vdd-1v0' [0003.614] W> set volts not configured for 'vdd-1v8-hs' [0003.614] I> retrieved tmds range from prod_list_hdmi_soc [0003.621] E> invalid display type [0003.622] E> cannot find any other nvdisp nodes [0003.639] I> edid read success [0003.651] I> edid read success [0003.652] I> width = 640, height = 480, frequency = 25174825 [0003.652] I> width = 1920, height = 1080, frequency = 148500000 [0003.653] I> width = 1280, height = 768, frequency = 79500000 [0003.653] I> width = 1360, height = 768, frequency = 85500000 [0003.653] I> width = 720, height = 480, frequency = 26973026 [0003.657] I> width = 720, height = 576, frequency = 26973026 [0003.663] I> width = 1280, height = 720, frequency = 74175824 [0003.668] I> width = 1280, height = 720, frequency = 74175824 [0003.674] I> width = 1920, height = 1080, frequency = 148351648 [0003.680] I> width = 1920, height = 1080, frequency = 148351648 [0003.686] I> width = 720, height = 480, frequency = 26973026 [0003.691] I> width = 720, height = 576, frequency = 26973026 [0003.697] I> width = 3840, height = 2160, frequency = 296703296 [0003.702] I> width = 3840, height = 2160, frequency = 296703296 [0003.708] I> width = 3840, height = 2160, frequency = 296703296 [0003.714] I> width = 3840, height = 2160, frequency = 296703296 [0003.720] I> width = 4096, height = 2160, frequency = 296703296 [0003.726] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.737] I> hdmi_enable, starting HDMI initialisation [0003.741] I> hdmi_enable, HDMI initialisation complete [0003.751] initializing target [0003.752] calling apps_init() [0003.752] starting app kernel_boot_app [0003.753] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting GRUB Boot L4TLauncher: Attempting Direct Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... ÿäI/TC: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x25943f018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259440f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyTCU0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6933000K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 475316K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.000704] Console: colour dummy device 80x25 [ 0.002250] printk: console [tty0] enabled [ 0.002314] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.002349] pid_max: default: 32768 minimum: 301 [ 0.002553] LSM: Security Framework initializing [ 0.002633] Yama: becoming mindful. [ 0.002675] SELinux: Initializing. [ 0.002851] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.002897] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006124] rcu: Hierarchical SRCU implementation. [ 0.006409] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.007248] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.007294] DTB Build time: Aug 10 2022 20:31:49 [ 0.010218] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.010504] Remapping and enabling EFI services. [ 0.012533] smp: Bringing up secondary CPUs ... [ 0.041645] Detected PIPT I-cache on CPU1 [ 0.041763] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.073336] Detected PIPT I-cache on CPU2 [ 0.073486] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.103047] Detected PIPT I-cache on CPU3 [ 0.103191] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.132949] Detected PIPT I-cache on CPU4 [ 0.133061] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.162718] Detected PIPT I-cache on CPU5 [ 0.162865] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.164285] smp: Brought up 1 node, 6 CPUs [ 0.164502] SMP: Total of 6 processors activated. [ 0.164572] CPU features: detected: Privileged Access Never [ 0.164595] CPU features: detected: LSE atomic instructions [ 0.164608] CPU features: detected: User Access Override [ 0.164622] CPU features: detected: 32-bit EL0 Support [ 0.164637] CPU features: detected: RAS Extension Support [ 0.164650] CPU features: detected: CRC32 instructions [ 0.164662] CPU features: detected: 32-bit EL1 Support [ 0.234691] CPU: All CPU(s) started at EL2 [ 0.240568] devtmpfs: initialized [ 0.287716] Registered cp15_barrier emulation handler [ 0.287811] Registered setend emulation handler [ 0.287831] KASLR enabled [ 0.288062] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.288109] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.289490] pinctrl core: initialized pinctrl subsystem [ 0.290559] SMBIOS 3.0.0 present. [ 0.290599] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.291250] NET: Registered protocol family 16 [ 0.293389] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.293953] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.294652] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.294714] audit: initializing netlink subsys (disabled) [ 0.295083] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.295570] thermal_sys: Registered thermal governor 'step_wise' [ 0.295576] thermal_sys: Registered thermal governor 'power_allocator' [ 0.295592] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.299238] cpuidle: using governor menu [ 0.299807] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.300286] ASID allocator initialised with 32768 entries [ 0.300554] Serial: AMBA PL011 UART driver [ 0.304154] Tegra reboot handler registered. [ 0.378944] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.379088] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.379276] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.379325] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.379446] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.379492] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.379621] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.379684] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.379817] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.379865] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.382080] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.382114] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.382141] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.382168] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.382196] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.382222] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.382248] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.382274] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.382336] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.382365] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.382419] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.382446] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.382488] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.382514] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.382556] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.382583] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.382609] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.382714] mc-err: mcerr ops are set to t19x [ 0.395384] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.395406] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.395418] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.395429] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.401968] ACPI: Interpreter disabled. [ 0.403155] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.404433] iommu: Default domain type: Translated [ 0.404501] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.404876] SCSI subsystem initialized [ 0.405043] usbcore: registered new interface driver usbfs [ 0.405089] usbcore: registered new interface driver hub [ 0.405128] usbcore: registered new device driver usb [ 0.405556] mc: Linux media interface: v0.10 [ 0.405592] videodev: Linux video capture interface: v2.00 [ 0.405895] pps_core: LinuxPPS API ver. 1 registered [ 0.405908] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.405930] PTP clock support registered [ 0.406159] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.406597] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.406689] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.407288] Registered efivars operations [ 0.413739] FPGA manager framework [ 0.413848] Advanced Linux Sound Architecture Driver Initialized. [ 0.414478] Bluetooth: Core ver 2.22 [ 0.414556] NET: Registered protocol family 31 [ 0.414570] Bluetooth: HCI device and connection manager initialized [ 0.414588] Bluetooth: HCI socket layer initialized [ 0.414606] Bluetooth: L2CAP socket layer initialized [ 0.414636] Bluetooth: SCO socket layer initialized [ 0.417227] camchar: rtcpu character device driver loaded [ 0.418416] clocksource: Switched to clocksource arch_sys_counter [ 0.826058] VFS: Disk quotas dquot_6.6.0 [ 0.826188] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.826626] pnp: PnP ACPI: disabled [ 0.840275] la/ptsa driver initialized. [ 0.840481] NET: Registered protocol family 2 [ 0.840671] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.848408] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.848534] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.848887] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.849513] TCP: Hash tables configured (established 65536 bind 65536) [ 0.849691] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.849851] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.850155] NET: Registered protocol family 1 [ 0.851267] RPC: Registered named UNIX socket transport module. [ 0.851301] RPC: Registered udp transport module. [ 0.851322] RPC: Registered tcp transport module. [ 0.851349] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.851398] PCI: CLS 0 bytes, default 64 [ 0.851668] Trying to unpack rootfs image as initramfs... [ 1.120837] Initramfs unpacking failed: invalid magic at start of compressed archive [ 1.124136] Freeing initrd memory: 8196K [ 1.128595] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.128631] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.128668] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.128996] kvm [1]: IPA Size Limit: 40 bits [ 1.129535] kvm [1]: vgic interrupt IRQ9 [ 1.130113] kvm [1]: VHE mode initialized successfully [ 1.131767] Initialise system trusted keyrings [ 1.132114] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.138662] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.139495] NFS: Registering the id_resolver key type [ 1.139533] Key type id_resolver registered [ 1.139550] Key type id_legacy registered [ 1.139668] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.139696] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.139740] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.149505] NET: Registered protocol family 38 [ 1.149530] Key type asymmetric registered [ 1.149548] Asymmetric key parser 'x509' registered [ 1.149602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.149840] io scheduler mq-deadline registered [ 1.149867] io scheduler kyber registered [ 1.156187] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.159318] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.159431] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.159540] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.159622] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.159698] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.164997] scrncapt: init (heads:4 wins:6 planes:4) [ 1.165351] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.166337] EINJ: ACPI disabled. [ 1.169679] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.169708] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.169726] tegra-pmc: ### PMC reset level: L1 [ 1.169741] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.169798] tegra-pmc: PMC Prod config success [ 1.175045] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.211625] random: fast init done [ 1.214864] printk: console [ttyTCU0] enabled [ 2.732392] arm-smmu 10000000.iommu: probing hardware configuration... [ 2.736787] arm-smmu 10000000.iommu: SMMUv2 with: [ 2.741573] arm-smmu 10000000.iommu: stage 1 translation [ 2.747194] arm-smmu 10000000.iommu: stage 2 translation [ 2.752466] arm-smmu 10000000.iommu: nested translation [ 2.757699] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 2.765140] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 2.774402] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 2.778503] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.785080] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.792395] arm-smmu 12000000.iommu: probing hardware configuration... [ 2.798110] arm-smmu 12000000.iommu: SMMUv2 with: [ 2.802845] arm-smmu 12000000.iommu: stage 1 translation [ 2.808108] arm-smmu 12000000.iommu: stage 2 translation [ 2.813504] arm-smmu 12000000.iommu: nested translation [ 2.819190] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 2.826367] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 2.835429] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 2.839244] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 2.846048] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 2.853178] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 2.863215] tegra_profiler: version: 1.147, samples/io: 49/28 [ 2.866419] tegra_profiler: auth: init [ 2.870636] THERMAL EST: found 3 subdevs [ 2.873867] THERMAL EST num_resources: 0 [ 2.877992] [THERMAL EST subdev 0] [ 2.881053] [THERMAL EST subdev 1] [ 2.884722] [THERMAL EST subdev 2] [ 2.887712] THERMAL EST: Found 2 profiles, default profile is quiet [ 2.894112] THERMAL EST: thz register success. [ 2.898661] THERMAL EST: end of probe, return err: 0 [ 2.903861] nvsciipc: loaded module [ 2.909916] tun: Universal TUN/TAP device driver, 1.6 [ 2.913324] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.919488] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.925024] e1000e: Intel(R) PRO/1000 Network Driver [ 2.930224] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.936303] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.941595] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.947656] PPP generic driver version 2.4.2 [ 2.951726] PPP BSD Compression module registered [ 2.956574] PPP Deflate Compression module registered [ 2.961587] PPP MPPE Compression module registered [ 2.966600] usbcore: registered new interface driver r8152 [ 2.972341] usbcore: registered new interface driver asix [ 2.977669] usbcore: registered new interface driver ax88179_178a [ 2.983532] usbcore: registered new interface driver cdc_ether [ 2.989745] usbcore: registered new interface driver net1080 [ 2.995356] usbcore: registered new interface driver cdc_subset [ 3.001124] usbcore: registered new interface driver zaurus [ 3.006835] usbcore: registered new interface driver cdc_ncm [ 3.012495] usbcore: registered new interface driver aqc111 [ 3.018125] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.024510] ohci-pci: OHCI PCI platform driver [ 3.028805] ohci-platform: OHCI generic platform driver [ 3.034206] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 3.040412] usbcore: registered new interface driver uas [ 3.044824] usbcore: registered new interface driver usb-storage [ 3.050876] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 3.057074] mousedev: PS/2 mouse device common for all mice [ 3.061988] usbcore: registered new interface driver xpad [ 3.069685] tegra_rtc c2a0000.rtc: registered as rtc1 [ 3.072980] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26) [ 3.080758] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 3.087172] i2c /dev entries driver [ 3.090332] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 3.096289] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 3.101704] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 3.107084] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 3.112435] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 3.117970] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 3.123119] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 3.135748] device-mapper: uevent: version 1.0.3 [ 3.136131] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 3.143321] cpuidle: Initializing cpuidle driver [ 3.147541] sdhci: Secure Digital Host Controller Interface driver [ 3.152603] sdhci: Copyright(c) Pierre Ossman [ 3.156677] Synopsys Designware Multimedia Card Interface Driver [ 3.162568] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.168782] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 3.169276] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 3.181899] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 3.200009] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 3.208712] vdd-1v0: supplied by regulator-dummy [ 3.214177] vdd-1v8-hs: supplied by regulator-dummy [ 3.218917] vdd-1v8-ls: supplied by regulator-dummy [ 3.223612] vdd-1v8-ao: supplied by regulator-dummy [ 3.227446] vddio-ddr-1v1: supplied by regulator-dummy [ 3.231756] vdd-rtc: supplied by regulator-dummy [ 3.233347] spmic-ldo1: supplied by regulator-dummy [ 3.234482] vdd-ao-3v3: supplied by regulator-dummy [ 3.240550] vddio-emmc-3v3: supplied by regulator-dummy [ 3.246599] spmic-ldo4: supplied by regulator-dummy [ 3.247718] vdd-usb-3v3: supplied by regulator-dummy [ 3.253728] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 3.259759] vdd-csi-1v2: supplied by vdd-1v8-ls [ 3.265089] spmic-ldo8: supplied by vdd-1v8-ls [ 3.266434] gpio-510 (gpio_default): hogged as output/high [ 3.268552] gpio-511 (gpio_default): hogged as output/high [ 3.275750] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 3.413991] max77686-rtc max77620-rtc: registered as rtc0 [ 3.415173] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 3.415462] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 4.110545] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 4.111497] hid: raw HID events driver (C) Jiri Kosina [ 4.112147] usbcore: registered new interface driver usbhid [ 4.112300] usbhid: USB HID core driver [ 4.113872] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 4.115009] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 27.184283] Camera-FW on t194-rce-safe started TCU early console enabled. [ 27.260080] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.607 ms) ÿá[ 4.200265] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 4.200727] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 4.201422] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 4.202094] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 4.203570] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 4.204136] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 4.204665] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 4.205716] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 4.206083] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 4.207952] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 4.217276] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 4.223449] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 4.227912] tegra186-aondbg aondbg: aondbg driver probe() OK [ 4.233913] denver_knobs_init:MTS_VERSION:55637613 [ 4.246691] t19x_cache tegra-cache: probed [ 4.251091] optee: probing for conduit method. [ 4.251976] optee: revision 3.16 (65cc2218) [ 4.253185] optee: dynamic shared memory is enabled [ 4.255380] optee: initialized driver [ 4.261515] nvpmodel: initialized successfully [ 4.262960] tegra_hv: get_hvd: not initialized yet [ 4.267551] user_ivc_mempool: hypervisor not present [ 4.273737] usbcore: registered new interface driver snd-usb-audio [ 4.280214] u32 classifier [ 4.281577] input device check on [ 4.285292] Actions configured [ 4.288766] Initializing XFRM netlink socket [ 4.293547] NET: Registered protocol family 10 [ 4.300363] Segment Routing with IPv6 [ 4.300918] NET: Registered protocol family 17 [ 4.305529] NET: Registered protocol family 15 [ 4.309620] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 4.323348] Bluetooth: RFCOMM socket layer initialized [ 4.328115] Bluetooth: RFCOMM ver 1.11 [ 4.331773] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.337888] Bluetooth: HIDP socket layer initialized [ 4.343344] 9pnet: Installing 9P2000 support [ 4.347385] Key type dns_resolver registered [ 4.352397] registered taskstats version 1 [ 4.355497] Loading compiled-in X.509 certificates [ 4.368186] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 4.371335] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 4.381408] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 4.383769] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 4.392277] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 4.400680] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 4.518580] tegra194-pcie 14160000.pcie: Link up [ 4.521852] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 4.522120] pci_bus 0004:00: root bus resource [bus 00-ff] [ 4.522272] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 4.522642] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 4.522852] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 4.523234] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 4.523712] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 4.535680] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 4.536144] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 4.536587] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 4.538237] pci 0004:01:00.0: supports D1 D2 [ 4.538366] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.551321] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 4.551745] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 4.552040] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 4.552420] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.552780] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 4.553020] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 4.553227] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 4.560682] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 4.569328] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 4.579980] pcieport 0004:00:00.0: Adding to iommu group 6 [ 4.584489] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 4.590046] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 4.597223] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 4.606276] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 4.607069] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 4.615740] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 4.624186] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 5.738979] tegra194-pcie 141a0000.pcie: Phy link never came up [ 5.739823] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 5.740032] pci_bus 0005:00: root bus resource [bus 00-ff] [ 5.740220] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 5.740468] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 5.740706] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 5.741070] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 5.741504] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 5.756490] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 5.756801] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 5.758773] pcieport 0005:00:00.0: Adding to iommu group 7 [ 5.760037] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 5.761648] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 5.763120] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 5.763977] pci 0005:00:00.0: Removing from iommu group 7 [ 5.764222] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 5.793002] host1x 13e10000.host1x: Adding to iommu group 8 [ 5.815034] host1x 13e10000.host1x: initialized [ 5.816372] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 5.817253] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 5.818112] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 5.818866] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 5.819628] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 5.820312] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 5.821013] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 5.822172] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 5.832263] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 5.838872] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 5.848852] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 5.856149] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 5.866219] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 5.873174] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 5.883163] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 5.889865] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 5.899763] falcon 15340000.vic: Adding to iommu group 17 [ 5.913937] falcon 15340000.vic: initialized [ 5.914970] falcon 15380000.nvjpg: Adding to iommu group 17 [ 5.920819] falcon 15380000.nvjpg: initialized [ 5.921370] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.933509] falcon 154c0000.nvenc: initialized [ 5.934045] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.943083] falcon 15a80000.nvenc1: initialized [ 5.943669] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.955717] nvdec 15480000.nvdec: initialized [ 5.956340] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.966263] nvdec 15140000.nvdec1: initialized [ 5.966982] tsec 15500000.tsec: Adding to iommu group 18 [ 5.973247] tsec 15500000.tsec: initialized [ 5.973950] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.980581] tsec 15100000.tsecb: initialized [ 5.984553] gic 2a41000.agic-controller: GIC IRQ controller registered [ 6.009331] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 6.020490] gpio-374 (wifi-enable): hogged as output/high [ 6.020824] gpio-431 (camera-control-output-low): hogged as output/low [ 6.021079] gpio-432 (camera-control-output-low): hogged as output/low [ 6.022604] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 6.023860] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 6.024358] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 6.031263] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 6.036769] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 6.042548] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 6.048086] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 6.055913] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 6.063453] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 6.075059] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 6.080074] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 6.085977] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.095136] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 6.104297] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 6.111208] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 6.118962] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 6.125426] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 6.135263] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 6.141179] pva 16000000.pva0: Adding to iommu group 22 [ 6.166897] pva 16000000.pva0: initialized [ 6.171500] pva 16800000.pva1: Adding to iommu group 23 [ 6.182679] pva 16800000.pva1: initialized [ 6.186834] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 6.198914] nvdla 15880000.nvdla0: initialized [ 6.200145] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 6.215885] nvdla 158c0000.nvdla1: initialized [ 6.217914] tegradccommon 15200000.display-hub: host1x channel mapped [ 6.218194] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 6.218623] tegradccommon 15200000.display-hub: dma mapping done [ 6.220190] tegradc 15200000.display: Adding to iommu group 26 [ 6.227427] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.227852] generic_infoframe_type: 0x87 [ 6.228070] tegradc 15200000.display: DT parsed successfully [ 6.228446] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.231193] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 6.232331] tegradc 15210000.display: Adding to iommu group 26 [ 6.237241] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 6.245352] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.249259] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 6.257120] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.263883] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 6.271286] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.277669] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 6.286659] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 6.291078] tegra_cec 3960000.tegra_cec: probed [ 6.296634] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 6.298245] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.302247] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 6.313109] tegradc 15200000.display: hdmi: can't get adpater for ddc bus 3 [ 6.320229] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 6.324274] tegradc 15200000.display: out->type:1 out_ops->init err = -517 [ 6.331273] kfuse 3830000.kfuse: initialized [ 6.339896] tegradc 15210000.display: disp0 connected to head1->sor [ 6.345246] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 6.349400] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.355416] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 6.356100] serial-tegra 3100000.serial: Adding to iommu group 2 [ 6.362110] tegradc 15210000.display: DT parsed successfully [ 6.381635] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 6.387322] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 6.397659] serial-tegra 3110000.serial: Adding to iommu group 2 [ 6.410587] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 6.419869] serial-tegra 3140000.serial: Adding to iommu group 2 [ 6.425433] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 6.445206] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 6.445565] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.448284] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 6.456753] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 6.465111] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 6.471922] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 6.479381] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.486539] usb usb1: Product: xHCI Host Controller [ 6.491500] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.497779] usb usb1: SerialNumber: 3610000.xhci [ 6.503553] hub 1-0:1.0: USB hub found [ 6.506319] hub 1-0:1.0: 4 ports detected [ 6.510989] tegra-xusb 3610000.xhci: xHCI Host Controller [ 6.516012] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 6.523628] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 6.531213] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 6.539211] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.546431] usb usb2: Product: xHCI Host Controller [ 6.551143] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 6.557614] usb usb2: SerialNumber: 3610000.xhci [ 6.563055] hub 2-0:1.0: USB hub found [ 6.566037] hub 2-0:1.0: 4 ports detected [ 6.604456] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 6.609662] i2c i2c-2: Added multiplexed i2c bus 9 [ 6.611126] i2c i2c-2: Added multiplexed i2c bus 10 [ 6.611309] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 6.624260] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 6.625357] tegra194-cpufreq ccplex: probed with BWMGR [ 6.626522] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 6.627148] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 6.627559] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 6.628794] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 6.637966] mmc0: CQHCI version 5.10 [ 6.642474] tegra194-vi5 15c10000.vi: initialized [ 6.644873] tegradc 15200000.display: disp0 connected to head0->sor1 [ 6.646128] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 6.649682] generic_infoframe_type: 0x87 [ 6.649737] tegradc 15200000.display: DT parsed successfully [ 6.656468] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 6.659868] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 6.665850] nvethernet 2490000.ethernet: failed to read MDIO address [ 6.665860] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 6.665864] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 6.665868] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 6.708786] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 6.709402] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 6.714535] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 6.722425] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 6.722628] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 6.729117] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 6.737687] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 6.738059] tegradc 15200000.display: vblank syncpt # 11 for dc 0 [ 6.746631] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 6.752319] tegradc 15200000.display: vpulse3 syncpt # 12 for dc 0 [ 6.766660] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 8x4 (on 0x0mm) pclk=148350937 [ 6.781049] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 6.790445] nvethernet 2490000.ethernet: Macsec not supported [ 6.791810] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 6.797996] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 6.798579] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 6.808977] CPU:0, Error:cbb-noc@0x2300000,irq=15 [ 6.808981] ************************************** [ 6.808983] CPU:0, Error:cbb-noc [ 6.808986] Error Logger : 0 [ 6.808994] ErrLog0 : 0x80030000 [ 6.808997] Transaction Type : RD - Read, Incrementing [ 6.809000] Error Code : SLV [ 6.809022] Error Source : Target [ 6.809025] Error Description : Target error detected by CBB slave [ 6.809034] AXI2APB_5 bridge error: RDFIFOF - Read Response FIFO Full interrupt [ 6.809049] Packet header Lock : 0 [ 6.810140] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 6.810261] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 6.810428] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 6.811612] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 6.901731] Packet header Len1 : 3 [ 6.905229] NOC protocol version : version >= 2.7 [ 6.910127] ErrLog1 : 0x352420 [ 6.913107] ErrLog2 : 0x0 [ 6.915994] RouteId : 0x352420 [ 6.919664] InitFlow : ccroc_p2ps/I/ccroc_p2ps [ 6.924221] Targflow : host1x_p2pm/T/host1x_p2pm [ 6.929208] TargSubRange : 18 [ 6.932788] SeqId : 0 [ 6.935677] ErrLog3 : 0x4045c [ 6.938831] ErrLog4 : 0x0 [ 6.941978] Address accessed : 0x15b4045c [ 6.946439] ErrLog5 : 0x809f851 [ 6.949852] Non-Modify : 0x1 [ 6.953266] AXI ID : 0x10 [ 6.956328] Master ID : CCPLEX [ 6.959481] Security Group(GRPSEC): 0x7e [ 6.963612] Cache : 0x1 -- Bufferable [ 6.967619] Protection : 0x2 -- Unprivileged, Non-Secure, Data Access [ 6.974445] FALCONSEC : 0x0 [ 6.977594] Virtual Queuing Channel(VQC): 0x0 [ 6.982507] ************************************** [ 6.987527] ------------[ cut here ]------------ [ 6.991771] kernel BUG at drivers/soc/tegra/cbb/tegra194-cbb.c:1896! [ 6.998335] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.003591] Modules linked in: [ 7.006818] CPU: 0 PID: 7 Comm: kworker/u12:0 Not tainted 5.10.104-tegra #1 [ 7.013727] Hardware name: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 7.025751] Workqueue: events_unbound async_run_entry_fn [ 7.031493] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--) [ 7.037548] pc : tegra194_cbb_err_isr+0x190/0x1b0 [ 7.042255] lr : tegra194_cbb_err_isr+0x114/0x1b0 [ 7.046719] sp : ffff800010003b30 [ 7.050302] x29: ffff800010003b30 x28: 0000000000000001 [ 7.055727] x27: 0000000000000005 x26: ffffab2e63f13f58 [ 7.060894] x25: ffffab2e6486ce10 x24: 0000000000000001 [ 7.066233] x23: ffffab2e64207000 x22: ffffab2e6468ea00 [ 7.072002] x21: 000000000000000f x20: ffff5e7300ea6c80 [ 7.077427] x19: ffffab2e6468ea00 x18: 0000000000000010 [ 7.082853] x17: 0000000000000007 x16: 00000000a8cb9401 [ 7.088107] x15: ffff5e73001630f0 x14: 0720072007200720 [ 7.093877] x13: 0720072007200720 x12: 0720072007200720 [ 7.099216] x11: 0720072007200720 x10: 0720072007200720 [ 7.104471] x9 : 0720072007200720 x8 : 07200720072a072a [ 7.110241] x7 : 072a072a072a072a x6 : c0000000ffffefff [ 7.115752] x5 : 0000000000057fa8 x4 : ffffab2e64517968 [ 7.121194] x3 : 00000000ffffffff x2 : ffffab2e629ae090 [ 7.126259] x1 : ffff5e7300162b80 x0 : 0000000100010100 [ 7.131851] Call trace: [ 7.134305] tegra194_cbb_err_isr+0x190/0x1b0 [ 7.138596] __handle_irq_event_percpu+0x68/0x2a0 [ 7.143159] handle_irq_event_percpu+0x40/0xa0 [ 7.147347] handle_irq_event+0x50/0xf0 [ 7.151385] handle_fasteoi_irq+0xc0/0x170 [ 7.155137] generic_handle_irq+0x40/0x60 [ 7.159417] __handle_domain_irq+0x70/0xd0 [ 7.163631] efi_header_end+0xb0/0xf0 [ 7.167116] el1_irq+0xd0/0x180 [ 7.170090] __do_softirq+0xb4/0x3e8 [ 7.173512] irq_exit+0xc0/0xe0 [ 7.176741] __handle_domain_irq+0x74/0xd0 [ 7.180767] efi_header_end+0xb0/0xf0 [ 7.184441] el1_irq+0xd0/0x180 [ 7.187420] tegra_hda_get_dev_id+0x6c/0x2b0 [ 7.191719] tegra_hda_init+0x234/0x440 [ 7.195642] tegra_dc_hdmi_init+0x820/0xb50 [ 7.199237] tegra_dc_set_out+0x2cc/0x480 [ 7.203347] tegra_dc_probe+0xa90/0x1570 [ 7.207286] platform_drv_probe+0x5c/0xb0 [ 7.211744] really_probe+0xf8/0x3d0 [ 7.215159] driver_probe_device+0x60/0xc0 [ 7.219530] __device_attach_driver+0x8c/0xd0 [ 7.223921] bus_for_each_drv+0x8c/0xe0 [ 7.227667] __device_attach_async_helper+0xc4/0xf0 [ 7.232584] async_run_entry_fn+0x4c/0x150 [ 7.236768] process_one_work+0x1c4/0x4a0 [ 7.240620] worker_thread+0x54/0x430 [ 7.244312] kthread+0x148/0x170 [ 7.247880] ret_from_fork+0x10/0x24 [ 7.251303] Code: a9425bf5 a9446bf9 a8c77bfd d65f03c0 (d4210000) [ 7.257702] ---[ end trace 1806d885ede6cc1f ]--- [ 7.262315] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 7.269495] SMP: stopping secondary CPUs [ 7.273713] Kernel Offset: 0x2b2e527f0000 from 0xffff800010000000 [ 7.279814] PHYS_OFFSET: 0xffffa18e00000000 [ 7.283930] CPU features: 0x8240002,03802a30 [ 7.288043] Memory Limit: none [ 7.291383] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]--- ÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.038] I> Boot-mode: Coldboot [0000.041] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.052] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.061] I> rst_source: 0x2, rst_level: 0x1 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.106] I> Temperature = 65000 [0000.109] W> Skipping boost for clk: BPMP_CPU_NIC [0000.113] W> Skipping boost for clk: BPMP_APB [0000.117] W> Skipping boost for clk: AXI_CBB [0000.121] W> Skipping boost for clk: AON_CPU_NIC [0000.125] W> Skipping boost for clk: CAN1 [0000.129] W> Skipping boost for clk: CAN2 [0000.133] I> Boot-device: QSPI (instance: 0) [0000.137] I> Qspi flash params source = mb1bct [0000.141] I> Qspi clock source : pllc_out0 [0000.145] I> Qspi-0 reinitialized [0000.148] I> Qspi flash params source = mb1bct [0000.161] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.168] W> Thermal config not found in BCT [0000.176] W> MEMIO rail config not found in BCT [0000.186] I> Qspi flash params source = mb1bct [0000.200] I> Qspi flash params source = mb1bct [0000.234] I> Qspi flash params source = mb1bct [0000.798] I> Qspi flash params source = mb1bct [0000.815] I> Qspi flash params source = mb1bct [0000.854] W> Platform config not found in BCT [0000.881] I> Qspi flash params source = mb1bct [0000.906] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.915] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.916] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.917] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.918] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.923] W> device prod register failed [0000.927] I> gpio framework initialized [0000.931] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.938] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.946] I> No valid sdcard_params in mb1_bct [0000.950] I> Boot_device: QSPI_FLASH instance: 0 [0000.954] I> qspi flash-0 params source = boot args [0000.960] I> QSPI-0l initialized successfully [0000.963] I> sdmmc-3 params source = safe params [0001.304] I> sdmmc DDR50 mode [0001.322] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.339] W> Cannot find any partition table for 00000003 [0001.340] > PARTITION_MANAGER: Failed to publish partition. [0001.356] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.357] I> Active Boot chain : 0 [0002.028] I> Relocating BR-BCT [0002.030] > DEVICE_PROD: device prod is not initialized. [0002.335] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.336] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.337] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.337] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.338] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.338] I> dram_block larger than 80000000 [0002.341] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.352] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.355] I> found decompressor handler: lz4 [0002.585] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.587] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäIÿâclk_early initialized ÿä/TC: ÿâmail_early initialized ÿäNÿâfuse initialized hwwdt initialized ÿäon-seÿât194_ec_get_ec_list: found 45 ecs ÿäcure externÿâec initialized vmon_setup_monitors: found 3 monitors vmon initialized ÿäal ÿâadc initialized ÿäDÿâfmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized noc_late initialized ÿägÿâpm_post initialized dbells initialized ÿä 11ÿâdmce initialized ÿä ÿâcvc initialized ÿä03:23:20 UTCÿâavfs_clk_mach_post initialized ÿä 2022ÿâavfs_clk_platform_post initialized ÿä aÿâcvc_late initialized regulator_post initialized ÿäarchÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä64 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.206] I> Welcome to NVDisp-Init [0003.206] I> NVDisp-Init version: t194-f9ecfedc [0003.206] I> CPU-BL Params @ 0xca020000 [0003.207] I> 0) Base:0x00000000 Size:0x00000000 [0003.207] I> 1) Base:0xc8300000 Size:0x00100000 [0003.207] I> 2) Base:0xc9800000 Size:0x00200000 [0003.208] I> 3) Base:0xc8600000 Size:0x00200000 [0003.210] I> 4) Base:0xc8200000 Size:0x00100000 [0003.215] I> 5) Base:0xc8100000 Size:0x00100000 [0003.219] I> 6) Base:0xc9400000 Size:0x00400000 [0003.223] I> 7) Base:0xc9000000 Size:0x00400000 [0003.228] I> 8) Base:0xc8000000 Size:0x00100000 [0003.232] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.237] I> 10) Base:0xca800000 Size:0x00800000 [0003.241] I> 11) Base:0x40000000 Size:0x00040000 [0003.246] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.250] I> 13) Base:0x40046000 Size:0x00002000 [0003.255] I> 14) Base:0x40048000 Size:0x00002000 [0003.259] I> 15) Base:0xaf000000 Size:0x00004000 [0003.264] I> 16) Base:0x4004a000 Size:0x00002000 [0003.268] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.273] I> 18) Base:0x4004c000 Size:0x00002000 [0003.277] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.281] I> 20) Base:0x4004e000 Size:0x00002000 [0003.286] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.290] I> 22) Base:0x00000000 Size:0x00000000 [0003.295] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.299] I> 24) Base:0xcc000000 Size:0x02000000 [0003.304] I> 25) Base:0x40050000 Size:0x00002000 [0003.308] I> 26) Base:0x40040000 Size:0x00006000 [0003.313] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.317] I> 28) Base:0xc8400000 Size:0x00200000 [0003.322] I> 29) Base:0xc8800000 Size:0x00400000 [0003.326] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.331] I> 31) Base:0x00000000 Size:0x00000000 [0003.335] I> 32) Base:0xf8000000 Size:0x08000000 [0003.340] I> 33) Base:0xce000000 Size:0x2a000000 [0003.344] I> 34) Base:0xcb000000 Size:0x01000000 [0003.348] I> 35) Base:0xae000000 Size:0x01000000 [0003.353] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.357] I> 37) Base:0xca000000 Size:0x00800000 [0003.362] I> 38) Base:0x80000000 Size:0x20000000 [0003.366] I> 39) Base:0xb0000000 Size:0x08000000 [0003.371] I> 40) Base:0x00000000 Size:0x00000000 [0003.375] I> 41) Base:0x00000000 Size:0x00000000 [0003.380] I> 42) Base:0x00000000 Size:0x00000000 [0003.384] I> 43) Base:0x00000000 Size:0x00000000 [0003.389] I> 44) Base:0x00000000 Size:0x00000000 [0003.393] I> 45) Base:0x00000000 Size:0x00000000 [0003.398] GIC-SPI Target CPU: 0 [0003.401] Interrupts Init done [0003.403] calling constructors [0003.406] initializing heap [0003.409] I> Heap: [0xa0960000 ... 0xadf00000] [0003.413] initializing threads [0003.416] initializing timers [0003.419] creating bootstrap completion thread [0003.423] top of bootstrap2() [0003.426] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.431] initializing platform [0003.434] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.439] W> device prod register failed [0003.443] I> Bl_dtb @0xadf00000 [0003.446] I> gpio framework initialized [0003.463] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.473] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.477] I> fixed regulator driver initialized [0003.494] I> register 'maxim' power off handle [0003.498] I> virtual i2c enabled [0003.498] I> registered 'maxim,max20024' pmic [0003.499] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.499] I> Boot-device: QSPI [0003.500] I> Boot_device: QSPI_FLASH instance: 0 [0003.500] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.505] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.512] I> QSPI source rate = 204000 Khz [0003.515] I> Requested rate for QSPI clock = 34000 Khz [0003.521] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.525] I> tx_clk_tap_delay : 0 [0003.528] I> rx_clk_tap_delay : 16 [0003.532] I> QSPI Flash Size = 32 MB [0003.539] I> Qspi initialized successfully [0003.540] I> qspi flash-0 params source = boot args [0003.545] W> No board IDs available [0003.547] E> Failed to get board id info! [0003.553] I> sdmmc-3 params source = safe params [0003.560] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.562] W> Cannot find any partition table for 00000003 [0003.566] E> Failed to publish 00000003 [0003.570] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.594] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> regulator 'vdd-hdmi-5v0' already enabled [0003.603] I> hdmi cable connected [0003.610] W> set volts not configured for 'vdd-1v0' [0003.617] W> set volts not configured for 'vdd-1v8-hs' [0003.617] I> retrieved tmds range from prod_list_hdmi_soc [0003.625] E> invalid display type [0003.626] E> cannot find any other nvdisp nodes [0003.643] I> edid read success [0003.656] I> edid read success [0003.656] I> width = 640, height = 480, frequency = 25174825 [0003.656] I> width = 1920, height = 1080, frequency = 148500000 [0003.657] I> width = 1280, height = 768, frequency = 79500000 [0003.657] I> width = 1360, height = 768, frequency = 85500000 [0003.658] I> width = 720, height = 480, frequency = 26973026 [0003.662] I> width = 720, height = 576, frequency = 26973026 [0003.667] I> width = 1280, height = 720, frequency = 74175824 [0003.673] I> width = 1280, height = 720, frequency = 74175824 [0003.678] I> width = 1920, height = 1080, frequency = 148351648 [0003.684] I> width = 1920, height = 1080, frequency = 148351648 [0003.690] I> width = 720, height = 480, frequency = 26973026 [0003.695] I> width = 720, height = 576, frequency = 26973026 [0003.701] I> width = 3840, height = 2160, frequency = 296703296 [0003.707] I> width = 3840, height = 2160, frequency = 296703296 [0003.712] I> width = 3840, height = 2160, frequency = 296703296 [0003.718] I> width = 3840, height = 2160, frequency = 296703296 [0003.724] I> width = 4096, height = 2160, frequency = 296703296 [0003.730] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.741] I> hdmi_enable, starting HDMI initialisation [0003.746] I> hdmi_enable, HDMI initialisation complete [0003.756] initializing target [0003.756] calling apps_init() [0003.757] starting app kernel_boot_app [0003.758] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting Recovery Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] printk: bootconsole [tegra_comb_uart0] enabled [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x259441018 ESRT=0x25944f998 RNG=0x27c595918 MEMRESERVE=0x259444f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000025944f998 to 0x000000025944f9d0. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/initrd rw rootwait console=ttyTCU0,115200n8 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 sdhci_tegra.en_boot_part_access=1 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6929316K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 479000K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.008679] Console: colour dummy device 80x25 [ 0.012382] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022503] pid_max: default: 32768 minimum: 301 [ 0.027243] LSM: Security Framework initializing [ 0.031820] Yama: becoming mindful. [ 0.035463] SELinux: Initializing. [ 0.039202] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.046662] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.057526] rcu: Hierarchical SRCU implementation. [ 0.059762] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.067943] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.085020] DTB Build time: Aug 10 2022 20:31:49 [ 0.092184] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.096580] Remapping and enabling EFI services. [ 0.102626] smp: Bringing up secondary CPUs ... ÿä: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.198641] Detected PIPT I-cache on CPU1 [ 0.198754] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.234151] Detected PIPT I-cache on CPU2 [ 0.234305] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.263887] Detected PIPT I-cache on CPU3 [ 0.264016] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.293683] Detected PIPT I-cache on CPU4 [ 0.293898] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.323560] Detected PIPT I-cache on CPU5 [ 0.323727] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.324080] smp: Brought up 1 node, 6 CPUs [ 0.325098] SMP: Total of 6 processors activated. [ 0.325262] CPU features: detected: Privileged Access Never [ 0.325366] CPU features: detected: LSE atomic instructions [ 0.325459] CPU features: detected: User Access Override [ 0.325839] CPU features: detected: 32-bit EL0 Support [ 0.326227] CPU features: detected: RAS Extension Support [ 0.326676] CPU features: detected: CRC32 instructions [ 0.327372] CPU features: detected: 32-bit EL1 Support [ 0.401474] CPU: All CPU(s) started at EL2 [ 0.407319] devtmpfs: initialized [ 0.453559] Registered cp15_barrier emulation handler [ 0.453786] Registered setend emulation handler [ 0.453881] KASLR enabled [ 0.454201] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.454364] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.455422] pinctrl core: initialized pinctrl subsystem [ 0.456474] SMBIOS 3.0.0 present. [ 0.456587] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.457452] NET: Registered protocol family 16 [ 0.459418] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.460062] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.460867] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.461080] audit: initializing netlink subsys (disabled) [ 0.461428] audit: type=2000 audit(0.408:1): state=initialized audit_enabled=0 res=1 [ 0.461872] thermal_sys: Registered thermal governor 'step_wise' [ 0.461878] thermal_sys: Registered thermal governor 'power_allocator' [ 0.461995] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.466925] cpuidle: using governor menu [ 0.475492] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.482404] ASID allocator initialised with 32768 entries [ 0.487695] Serial: AMBA PL011 UART driver [ 0.494756] Tegra reboot handler registered. [ 0.571394] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.571596] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.571871] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.572030] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.572294] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.572481] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.572745] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.572890] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.573158] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.573337] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.575725] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.575867] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.577536] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.584272] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.590740] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.597320] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.603611] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.610174] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.616665] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.623384] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.629855] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.636344] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.642720] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.648852] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.655493] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.661880] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.668270] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.674724] mc-err: mcerr ops are set to t19x [ 0.691424] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.691586] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.692208] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.698906] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.712184] ACPI: Interpreter disabled. [ 0.713429] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.715266] iommu: Default domain type: Translated [ 0.718895] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.725196] SCSI subsystem initialized [ 0.728884] usbcore: registered new interface driver usbfs [ 0.734092] usbcore: registered new interface driver hub [ 0.739611] usbcore: registered new device driver usb [ 0.745057] mc: Linux media interface: v0.10 [ 0.749031] videodev: Linux video capture interface: v2.00 [ 0.754723] pps_core: LinuxPPS API ver. 1 registered [ 0.759335] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.768465] PTP clock support registered [ 0.772501] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.779332] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.786278] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.793106] Registered efivars operations [ 0.801424] FPGA manager framework [ 0.801601] Advanced Linux Sound Architecture Driver Initialized. [ 0.806772] Bluetooth: Core ver 2.22 [ 0.809850] NET: Registered protocol family 31 [ 0.814117] Bluetooth: HCI device and connection manager initialized [ 0.820244] Bluetooth: HCI socket layer initialized [ 0.825508] Bluetooth: L2CAP socket layer initialized [ 0.830746] Bluetooth: SCO socket layer initialized [ 0.837081] camchar: rtcpu character device driver loaded [ 0.842642] clocksource: Switched to clocksource arch_sys_counter [ 1.133995] VFS: Disk quotas dquot_6.6.0 [ 1.134134] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.134596] pnp: PnP ACPI: disabled [ 1.144524] la/ptsa driver initialized. [ 1.144732] NET: Registered protocol family 2 [ 1.144964] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.150788] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.151050] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.151431] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.151988] TCP: Hash tables configured (established 65536 bind 65536) [ 1.152267] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.152501] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.152865] NET: Registered protocol family 1 [ 1.154033] RPC: Registered named UNIX socket transport module. [ 1.154185] RPC: Registered udp transport module. [ 1.154283] RPC: Registered tcp transport module. [ 1.154380] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.154536] PCI: CLS 0 bytes, default 64 [ 1.154897] Trying to unpack rootfs image as initramfs... [ 1.550347] Freeing initrd memory: 11876K [ 1.554631] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.554789] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.554922] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.555348] kvm [1]: IPA Size Limit: 40 bits [ 1.555971] kvm [1]: vgic interrupt IRQ9 [ 1.556552] kvm [1]: VHE mode initialized successfully [ 1.558097] Initialise system trusted keyrings [ 1.558491] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.564236] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.565130] NFS: Registering the id_resolver key type [ 1.565252] Key type id_resolver registered [ 1.565352] Key type id_legacy registered [ 1.565517] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.565758] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.565920] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.575662] NET: Registered protocol family 38 [ 1.575773] Key type asymmetric registered [ 1.575888] Asymmetric key parser 'x509' registered [ 1.576054] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.576448] io scheduler mq-deadline registered [ 1.576572] io scheduler kyber registered [ 1.582354] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.585296] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.586655] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.592486] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.598252] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.603931] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.614860] scrncapt: init (heads:4 wins:6 planes:4) [ 1.614969] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.616083] EINJ: ACPI disabled. [ 1.627700] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.631531] tegra-pmc: ### PMC reset source: BCCPLEXWDT [ 1.636420] tegra-pmc: ### PMC reset level: L1 [ 1.640707] tegra-pmc: ### PMC reset status reg: 0x9 [ 1.645726] tegra-pmc: PMC Prod config success [ 1.654808] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.658875] printk: console [ttyTCU0] enabled [ 1.658875] printk: console [ttyTCU0] enabled 1.664445] printk: bootconsole [tegra_comb_uart0] disabled [ 1.664445] printk: bootconsole [tegra_comb_uart0] disabled [ 1.676729] arm-smmu 10000000.iommu: probing hardware configuration... [ 1.682218] arm-smmu 10000000.iommu: SMMUv2 with: [ 1.686985] arm-smmu 10000000.iommu: stage 1 translation [ 1.692600] arm-smmu 10000000.iommu: stage 2 translation [ 1.697870] arm-smmu 10000000.iommu: nested translation [ 1.703366] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 1.710712] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 1.720131] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 1.723885] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.730592] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.737711] arm-smmu 12000000.iommu: probing hardware configuration... [ 1.743004] arm-smmu 12000000.iommu: SMMUv2 with: [ 1.747728] arm-smmu 12000000.iommu: stage 1 translation [ 1.753505] arm-smmu 12000000.iommu: stage 2 translation [ 1.758690] arm-smmu 12000000.iommu: nested translation [ 1.764353] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 1.771270] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 1.780865] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 1.784420] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.791216] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.798290] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 1.808214] tegra_profiler: version: 1.147, samples/io: 49/28 [ 1.811334] tegra_profiler: auth: init [ 1.815872] THERMAL EST: found 3 subdevs [ 1.819057] THERMAL EST num_resources: 0 [ 1.823150] [THERMAL EST subdev 0] [ 1.826215] [THERMAL EST subdev 1] [ 1.829882] [THERMAL EST subdev 2] [ 1.832890] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.839329] THERMAL EST: thz register success. [ 1.843579] THERMAL EST: end of probe, return err: 0 [ 1.848799] nvsciipc: loaded module [ 1.855039] tun: Universal TUN/TAP device driver, 1.6 [ 1.858424] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 1.864639] hns3: Copyright (c) 2017 Huawei Corporation. [ 1.870476] e1000e: Intel(R) PRO/1000 Network Driver [ 1.875384] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.881471] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.886758] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.892641] PPP generic driver version 2.4.2 [ 1.897136] PPP BSD Compression module registered [ 1.901727] PPP Deflate Compression module registered [ 1.906976] PPP MPPE Compression module registered [ 1.912009] usbcore: registered new interface driver r8152 [ 1.917500] usbcore: registered new interface driver asix [ 1.922832] usbcore: registered new interface driver ax88179_178a [ 1.928959] usbcore: registered new interface driver cdc_ether [ 1.934949] usbcore: registered new interface driver net1080 [ 1.940258] usbcore: registered new interface driver cdc_subset [ 1.946553] usbcore: registered new interface driver zaurus [ 1.951995] usbcore: registered new interface driver cdc_ncm [ 1.957671] usbcore: registered new interface driver aqc111 [ 1.963611] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.969389] ohci-pci: OHCI PCI platform driver [ 1.973942] ohci-platform: OHCI generic platform driver [ 1.979379] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 1.985632] usbcore: registered new interface driver uas [ 1.990216] usbcore: registered new interface driver usb-storage [ 1.996303] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 2.001987] mousedev: PS/2 mouse device common for all mice [ 2.007376] usbcore: registered new interface driver xpad [ 2.014787] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.018144] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:24 UTC (24) [ 2.025653] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.032166] i2c /dev entries driver [ 2.035776] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.041182] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.046620] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.052288] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.057551] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.063073] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.068493] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.080069] device-mapper: uevent: version 1.0.3 [ 2.080403] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.088509] cpuidle: Initializing cpuidle driver [ 2.092663] sdhci: Secure Digital Host Controller Interface driver [ 2.097736] sdhci: Copyright(c) Pierre Ossman [ 2.101574] Synopsys Designware Multimedia Card Interface Driver [ 2.107734] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.113696] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.114247] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.127026] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.144502] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.153042] vdd-1v0: supplied by regulator-dummy [ 2.158382] vdd-1v8-hs: supplied by regulator-dummy [ 2.162997] vdd-1v8-ls: supplied by regulator-dummy [ 2.167639] vdd-1v8-ao: supplied by regulator-dummy [ 2.171358] vddio-ddr-1v1: supplied by regulator-dummy [ 2.175604] vdd-rtc: supplied by regulator-dummy [ 2.177135] spmic-ldo1: supplied by regulator-dummy [ 2.178244] vdd-ao-3v3: supplied by regulator-dummy [ 2.184206] vddio-emmc-3v3: supplied by regulator-dummy [ 2.190443] spmic-ldo4: supplied by regulator-dummy [ 2.191529] vdd-usb-3v3: supplied by regulator-dummy [ 2.198792] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 2.204895] vdd-csi-1v2: supplied by vdd-1v8-ls [ 2.210288] spmic-ldo8: supplied by vdd-1v8-ls [ 2.211623] gpio-510 (gpio_default): hogged as output/high [ 2.213711] gpio-511 (gpio_default): hogged as output/high [ 2.220879] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 2.226398] random: fast init done [ 2.360670] max77686-rtc max77620-rtc: registered as rtc0 [ 2.361655] max77620-power max20024-power: Event recorder REG_NVERC : 0x0 [ 2.361975] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.064342] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.065339] hid: raw HID events driver (C) Jiri Kosina [ 3.066005] usbcore: registered new interface driver usbhid [ 3.066153] usbhid: USB HID core driver [ 3.067947] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.069029] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 25.708856] Camera-FW on t194-rce-safe started TCU early console enabled. [ 25.784288] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.780 ms, total boot 76.241 ms) ÿá[ 3.154206] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.154677] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.155597] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.156202] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.158250] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.158910] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.159456] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.160879] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.161266] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.163616] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.171037] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.177309] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.182466] tegra186-aondbg aondbg: aondbg driver probe() OK [ 3.188880] denver_knobs_init:MTS_VERSION:55637613 [ 3.200694] t19x_cache tegra-cache: probed [ 3.203163] optee: probing for conduit method. [ 3.203945] optee: revision 3.16 (65cc2218) [ 3.204736] optee: dynamic shared memory is enabled [ 3.209252] optee: initialized driver [ 3.215294] nvpmodel: initialized successfully [ 3.216587] tegra_hv: get_hvd: not initialized yet [ 3.221377] user_ivc_mempool: hypervisor not present [ 3.227559] usbcore: registered new interface driver snd-usb-audio [ 3.234244] u32 classifier [ 3.235115] input device check on [ 3.238823] Actions configured [ 3.242677] Initializing XFRM netlink socket [ 3.247207] NET: Registered protocol family 10 [ 3.253465] Segment Routing with IPv6 [ 3.255000] NET: Registered protocol family 17 [ 3.258983] NET: Registered protocol family 15 [ 3.263673] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.277431] Bluetooth: RFCOMM socket layer initialized [ 3.281882] Bluetooth: RFCOMM ver 1.11 [ 3.285543] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.291748] Bluetooth: HIDP socket layer initialized [ 3.297493] 9pnet: Installing 9P2000 support [ 3.301111] Key type dns_resolver registered [ 3.306603] registered taskstats version 1 [ 3.309278] Loading compiled-in X.509 certificates [ 3.322729] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 3.325121] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 3.335437] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 3.337220] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 3.346090] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 3.354196] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 3.469664] tegra194-pcie 14160000.pcie: Link up [ 3.472858] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 3.473101] pci_bus 0004:00: root bus resource [bus 00-ff] [ 3.473244] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 3.473528] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 3.473784] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 3.474161] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 3.474601] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 3.487678] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 3.488131] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.488642] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 3.490268] pci 0004:01:00.0: supports D1 D2 [ 3.490493] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.502368] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 3.502614] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 3.502841] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 3.503442] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.503902] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 3.504121] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 3.504336] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 3.511727] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 3.520390] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 3.531076] pcieport 0004:00:00.0: Adding to iommu group 6 [ 3.535019] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 3.540839] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 3.547877] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 3.556924] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 3.558423] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 3.566726] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 3.575091] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 4.690439] tegra194-pcie 141a0000.pcie: Phy link never came up [ 4.691223] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 4.691488] pci_bus 0005:00: root bus resource [bus 00-ff] [ 4.691664] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 4.691918] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 4.692131] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 4.692634] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 4.693073] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 4.715612] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 4.715862] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 4.717807] pcieport 0005:00:00.0: Adding to iommu group 7 [ 4.719046] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 4.720475] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 4.722204] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 4.723215] pci 0005:00:00.0: Removing from iommu group 7 [ 4.723748] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 4.765094] host1x 13e10000.host1x: Adding to iommu group 8 [ 4.789185] host1x 13e10000.host1x: initialized [ 4.790741] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 4.791673] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 4.792892] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 4.793531] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 4.794868] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 4.795600] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 4.796742] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 4.797314] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 4.798433] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 4.799087] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 4.800275] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 4.807727] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 4.817726] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 4.824355] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 4.834174] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 4.841371] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 4.851244] falcon 15340000.vic: Adding to iommu group 17 [ 4.865924] falcon 15340000.vic: initialized [ 4.867112] falcon 15380000.nvjpg: Adding to iommu group 17 [ 4.873325] falcon 15380000.nvjpg: initialized [ 4.874099] falcon 154c0000.nvenc: Adding to iommu group 17 [ 4.884920] falcon 154c0000.nvenc: initialized [ 4.885511] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 4.894382] falcon 15a80000.nvenc1: initialized [ 4.895036] nvdec 15480000.nvdec: Adding to iommu group 17 [ 4.909161] nvdec 15480000.nvdec: initialized [ 4.909824] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 4.920340] nvdec 15140000.nvdec1: initialized [ 4.921065] tsec 15500000.tsec: Adding to iommu group 18 [ 4.926908] tsec 15500000.tsec: initialized [ 4.927359] tsec 15100000.tsecb: Adding to iommu group 19 [ 4.932831] tsec 15100000.tsecb: initialized [ 4.936722] gic 2a41000.agic-controller: GIC IRQ controller registered [ 4.963715] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 4.975372] gpio-374 (wifi-enable): hogged as output/high [ 4.975616] gpio-431 (camera-control-output-low): hogged as output/low [ 4.975995] gpio-432 (camera-control-output-low): hogged as output/low [ 4.977708] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 4.979812] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 4.980328] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 4.982596] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 4.988168] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 4.993879] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 4.999588] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.007928] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.015200] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.026628] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.031736] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.037774] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.046569] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.055518] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.062784] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.070561] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.076597] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.086590] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.092480] pva 16000000.pva0: Adding to iommu group 22 [ 5.120730] pva 16000000.pva0: initialized [ 5.125794] pva 16800000.pva1: Adding to iommu group 23 [ 5.136453] pva 16800000.pva1: initialized [ 5.140834] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.155168] nvdla 15880000.nvdla0: initialized [ 5.156944] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.167045] nvdla 158c0000.nvdla1: initialized [ 5.169507] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.169871] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.170821] tegradc 15200000.display: Adding to iommu group 26 [ 5.171235] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.172499] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 5.173100] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 5.173393] tegra_cec 3960000.tegra_cec: probed [ 5.175366] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 5.176013] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.178213] tegradc 15210000.display: Adding to iommu group 26 [ 5.186956] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 5.190844] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.198057] kfuse 3830000.kfuse: initialized [ 5.205131] tegradccommon 15200000.display-hub: dma mapping done [ 5.210211] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 5.221847] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 5.228812] serial-tegra 3100000.serial: Adding to iommu group 2 [ 5.235063] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 5.244423] serial-tegra 3110000.serial: Adding to iommu group 2 [ 5.249859] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 5.258502] serial-tegra 3140000.serial: Adding to iommu group 2 [ 5.264430] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 5.285027] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 5.285382] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.287666] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 5.295546] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 5.304567] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 5.310802] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 5.318688] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.325856] usb usb1: Product: xHCI Host Controller [ 5.330598] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 5.336909] usb usb1: SerialNumber: 3610000.xhci [ 5.342655] hub 1-0:1.0: USB hub found [ 5.345769] hub 1-0:1.0: 4 ports detected [ 5.350301] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.354822] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 5.362705] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 5.370512] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 5.378268] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.385511] usb usb2: Product: xHCI Host Controller [ 5.390234] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 5.396503] usb usb2: SerialNumber: 3610000.xhci [ 5.402144] hub 2-0:1.0: USB hub found [ 5.405140] hub 2-0:1.0: 4 ports detected [ 5.446992] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 5.453347] i2c i2c-2: Added multiplexed i2c bus 9 [ 5.454902] i2c i2c-2: Added multiplexed i2c bus 10 [ 5.455077] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 5.468371] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1906000 KHz, changing to: 1907200 KHz [ 5.469498] tegra194-cpufreq ccplex: probed with BWMGR [ 5.470702] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 5.471143] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 5.471589] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 5.472832] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 5.481677] tegra194-vi5 15c10000.vi: initialized [ 5.482369] mmc0: CQHCI version 5.10 [ 5.483165] tegradc 15210000.display: disp0 connected to head1->sor [ 5.483936] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 5.488615] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 5.495319] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 5.502365] tegradc 15210000.display: DT parsed successfully [ 5.510338] nvethernet 2490000.ethernet: failed to read MDIO address [ 5.515699] tegradc 15210000.display: dc.1 probe not in device tree order, deferring [ 5.515896] tegradc 15200000.display: disp0 connected to head0->sor1 [ 5.522113] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 5.522119] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 5.522123] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 5.529651] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 5.529990] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 5.533756] generic_infoframe_type: 0x87 [ 5.533793] tegradc 15200000.display: DT parsed successfully [ 5.533847] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 5.536364] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 5.536370] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 5.588370] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 5.595704] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 5.601968] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 5.601973] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 5.602418] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 5.617759] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 5.621607] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 5.621972] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 5.623272] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 5.623276] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 5.626986] tegradc 15200000.display: probed [ 5.678576] mmc0: Command Queue Engine enabled [ 5.682918] nvethernet 2490000.ethernet: Macsec not supported [ 5.693001] mmc0: periodic cache flush enabled [ 5.693018] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 5.693363] Console: switching to colour frame buffer device 240x67 [ 5.693676] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 5.693687] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 5.695017] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 5.695164] irq: IRQ266: trimming hierarchy from :interrupt-controller@3881000 [ 5.695291] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 5.696376] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 5.697706] tegradc 15200000.display: fb registered [ 5.697783] irq: IRQ267: trimming hierarchy from :pmc@c360000 [ 5.704504] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 5.759747] tegra-se-nvhost 15810000.se: initialized [ 5.766143] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 5.766157] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 5.766332] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 5.775721] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 5.776715] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 5.779098] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 5.783102] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 5.809191] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 5.810617] tegra-se-nvhost 15820000.se: initialized [ 5.815919] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.815924] usb 1-2: Product: 4-Port USB 2.0 Hub [ 5.815927] usb 1-2: Manufacturer: Generic [ 5.818036] hub 1-2:1.0: USB hub found [ 5.826193] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 5.830789] hub 1-2:1.0: 4 ports detected [ 5.837086] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 5.851627] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 5.856639] tegra-se-nvhost 15830000.se: initialized [ 5.860912] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 5.867297] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 5.875063] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 5.875687] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 5.880385] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 5.887482] Extcon AUX1(HDMI) enable [ 5.887605] tegradc 15210000.display: disp1 connected to head1->sor [ 5.894621] tegra-se-nvhost 15840000.se: initialized [ 5.901741] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 5.910685] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 5.915118] tegradc 15210000.display: DT parsed successfully [ 5.919877] tegra_actmon d230000.actmon: in actmon_register()... [ 5.924711] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 5.926449] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 5.929696] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 5.936789] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 5.943060] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 5.948646] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 5.955807] tegradc 15210000.display: probed [ 5.963312] hvc_sysfs: hypervisor is not present [ 5.977702] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.013459] tegradc 15210000.display: fb registered [ 6.013467] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.025731] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.029954] usb 2-3: Manufacturer: Generic [ 6.044935] hub 2-3:1.0: USB hub found [ 6.046938] hub 2-3:1.0: 4 ports detected [ 6.062652] ALSA device list: [ 6.062753] No soundcards found. [ 6.066604] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.066793] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.066994] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 [ 6.069039] tegradc 15210000.display: blank - powerdown [ 6.074219] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.076092] Freeing unused kernel memory: 3968K [ 6.082440] Extcon DP: HPD disabled [ 6.082445] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.082458] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.103548] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 6.103594] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.103652] tegradc 15200000.display: blank - powerdown [ 6.109683] Run /init as init process [ 6.152103] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.152107] Extcon AUX1(HDMI) disable [ 6.175611] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.176494] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.185626] tegra_cec 3960000.tegra_cec: Can't find physical address. [ 6.185632] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. [ 6.189681] tegradc 15200000.display: unblank [ 6.190959] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.191174] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.197227] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.199224] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.203298] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.203301] Extcon AUX1(HDMI) enable [ 6.215975] tegradc 15200000.display: sync windows ret = 247 [ 6.230999] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 6.238141] Extcon HDMI: HPD enabled [ 6.241809] tegradc 15200000.display: hdmi: plugged [ 6.250803] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 6.254781] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.262384] usb 1-3: Product: Bluetooth Radio [ 6.266839] usb 1-3: Manufacturer: Realtek [ 6.271045] usb 1-3: SerialNumber: 00e04c000001 [ 6.287818] Root device found: initrd [ 6.289439] Mount initrd as rootfs and enter recovery mode Finding OTA work dir on external storage devices Checking whether device /dev/mmcblk?p1 exist Looking for OTA work directory on the device(s): /dev/mmcblk0p1 Checking whether device /dev/sd?1 exist Device /dev/sd?1 does not exist Checking whether device /dev/nvme?n1p1 exist Device /dev/nvme?n1p1 does not exist Finding OTA work dir on internal storage device [ 6.390704] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) OTA work directory /mnt/ota_work is not found on /dev/mmcblk0p1 OTA work directory is not found on internal and external storage devices bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell bash-5.0# [ 37.993622] vdd-1v8-sd: disabling [ 37.993724] vdd-3v3-cvb: disabling [ 37.993800] vdd-1v8-cvb: disabling [ 37.993877] vdd-epb-1v0: disabling [ 37.993974] vdd-fan: disabling [ 37.994043] vdd_sys_en: disabling [ 63.965896] random: crng init done ÿÿâ [0000.025] W> RATCHET: MB1 binary ratchet value 4 is larger than ratchet level 2 from HW fuses. [0000.033] I> MB1 (prd-version: 2.3.0.0-t194-41334769-0a17edc1) [0000.039] I> Boot-mode: Coldboot [0000.042] I> Platform: Silicon [0000.044] I> Chip revision : A02P [0000.047] I> Bootrom patch version : 15 (correctly patched) [0000.053] I> ATE fuse revision : 0x200 [0000.056] I> Ram repair fuse : 0x0 [0000.059] I> Ram Code : 0x0 [0000.062] I> rst_source: 0x0, rst_level: 0x0 [0000.066] I> Boot-device: QSPI (instance: 0) [0000.070] I> Qspi flash params source = brbct [0000.074] I> Qspi clock source : pllp [0000.078] I> Qspi-0 initialized successfully [0000.082] I> Boot chain mechanism: A/B [0000.085] I> Current Boot-Chain Slot: 0 [0000.089] I> BR-BCT Boot-Chain: 0, status: 0. update flag: 0 [0000.094] I> Qspi flash params source = brbct [0000.100] W> PROD_CONFIG: device prod data is empty in MB1 BCT. [0000.108] I> Temperature = 24000 [0000.111] W> Skipping boost for clk: BPMP_CPU_NIC [0000.115] W> Skipping boost for clk: BPMP_APB [0000.119] W> Skipping boost for clk: AXI_CBB [0000.123] W> Skipping boost for clk: AON_CPU_NIC [0000.127] W> Skipping boost for clk: CAN1 [0000.131] W> Skipping boost for clk: CAN2 [0000.135] I> Boot-device: QSPI (instance: 0) [0000.139] I> Qspi flash params source = mb1bct [0000.143] I> Qspi clock source : pllc_out0 [0000.147] I> Qspi-0 reinitialized [0000.150] I> Qspi flash params source = mb1bct [0000.163] I> Non-ECC region[0]: Start:0x80000000, End:0x100000000 [0000.170] W> Thermal config not found in BCT [0000.178] W> MEMIO rail config not found in BCT [0000.188] I> Qspi flash params source = mb1bct [0000.202] I> Qspi flash params source = mb1bct [0000.235] I> Qspi flash params source = mb1bct [0000.800] I> Qspi flash params source = mb1bct [0000.816] I> Qspi flash params source = mb1bct [0000.856] W> Platform config not found in BCT [0000.883] I> Qspi flash params source = mb1bct [0000.908] I> MB1 done ÿýÿàmain enter SPE VERSION #: R01.00.18 Created: Jan 29 2021 @ 14:18:27 HW Function test Start Scheduler. in late init ÿâ [0000.917] I> Welcome to MB2(TBoot-BPMP) (version: default.t194-mobile-1ca012e4) [0000.918] I> DMA Heap @ [0x526fa000 - 0x52ffa000] [0000.918] I> Default Heap @ [0xd486400 - 0xd48a400] [0000.919] E> DEVICE_PROD: Invalid value data = 70020000, size = 0. [0000.925] W> device prod register failed [0000.929] I> gpio framework initialized [0000.932] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0000.940] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0000.948] I> No valid sdcard_params in mb1_bct [0000.952] I> Boot_device: QSPI_FLASH instance: 0 [0000.956] I> qspi flash-0 params source = boot args [0000.962] I> QSPI-0l initialized successfully [0000.965] I> sdmmc-3 params source = safe params [0001.364] I> sdmmc DDR50 mode [0001.382] I> Found 41 partitions in QSPI_FLASH (instance 0) [0001.399] W> Cannot find any partition table for 00000003 [0001.401] > PARTITION_MANAGER: Failed to publish partition. [0001.416] I> Found 19 partitions in SDMMC_USER (instance 3) [0001.417] I> Active Boot chain : 0 [0002.089] I> Relocating BR-BCT [0002.090] > DEVICE_PROD: device prod is not initialized. [0002.396] I> Relocating OP-TEE dtb from: 0x6bfff1d0 to 0x70050000, size: 1008 [0002.397] I> [0] START: 0x80000000, SIZE: 0x2f000000 [0002.397] I> [1] START: 0xaf010000, SIZE: 0x18bf0000 [0002.398] I> [2] START: 0xc7d00000, SIZE: 0xc0000 [0002.398] I> [3] START: 0xca000000, SIZE: 0x800000 [0002.399] I> dram_block larger than 80000000 [0002.401] I> [4] START: 0x100000000, SIZE: 0x180000000 [0002.412] I> Setting NS memory ranges to OP-TEE dtb finished. [0002.416] I> found decompressor handler: lz4 [0002.644] I> EKB detected (length: 0x410) @ VA:0x52709400 [0002.646] I> Setting EKB blob info to OPTEE dtb finished. ÿäNOTICE: BL31: v2.6(release):4fa405dbd NOTICE: BL31: Built : 20:16:55, Aug 10 2022 I/TC: ÿâ bpmp: init bpmp: tag is 128431eec76692047e1ac1ebc0392266 sku_dt_init: not sku 0x00 ÿäI/ÿâclk_early initialized ÿäTC: ÿâmail_early initialized ÿäNoÿâfuse initialized hwwdt initialized ÿän-secÿât194_ec_get_ec_list: found 45 ecs ÿäure externÿâec initialized ÿäaÿâvmon_setup_monitors: found 3 monitors vmon initialized ÿäl Dÿâadc initialized fmon_populate_monitors: found 73 monitors ÿäT found ÿâfmon initialized mc initialized reset initialized nvhs initialized uphy_early initialized emc_early initialized 392 clocks registered clk initialized io_dpd initialized thermal initialized thermal_mrq initialized i2c initialized vrmon_dt_init: vrmon node not found vrmon_chk_boot_state: found 0 rail monitors vrmon initialized regulator initialized avfs_clk_platform initialized soctherm initialized aotag initialized powergate initialized dvs initialized pm initialized suspend initialized pg_late initialized pg_mrq_init initialized strap initialized nvl initialized emc initialized emc_mrq initialized clk_dt initialized tj_init initialized uphy_dt initialized uphy_mrq initialized uphy initialized ec_swd_poll_start: 281 reg polling start w period 47 ms ec_late initialized hwwdt_late initialized reset_mrq initialized ec_mrq initialized fmon_mrq initialized clk_mrq initialized avfs_mrq initialized mail_mrq initialized i2c_mrq initialized tag_mrq initialized console_mrq initialized mrq initialized clk_sync_fmon_post initialized ÿäI/TC: OP-TEE version: 3.16 (gcc version 9.3.0 (Buildroot 2020.08)) #2 Thu Auÿâclk_dt_late initialized ÿägÿânoc_late initialized ÿä ÿâpm_post initialized dbells initialized ÿä11 ÿâdmce initialized cvc initialized ÿä03:23:20 UTC ÿâavfs_clk_mach_post initialized ÿä2022ÿâavfs_clk_platform_post initialized ÿä aaÿâcvc_late initialized regulator_post initialized ÿärch6ÿârm initialized console_late initialized clk_dt_post initialized mc_reg initialized ÿä4 I/TC: WARNINÿâpg_post initialized profile initialized fuse_late initialized extras_post initialized bpmp: init complete entering main console loop ] ÿäG: This OP-TEE configuration might be insecure! I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html I/TC: Primary CPU initializing I/TC: Primary CPU switching to normal world boot ÿá [0003.265] I> Welcome to NVDisp-Init [0003.265] I> NVDisp-Init version: t194-f9ecfedc [0003.265] I> CPU-BL Params @ 0xca020000 [0003.266] I> 0) Base:0x00000000 Size:0x00000000 [0003.266] I> 1) Base:0xc8300000 Size:0x00100000 [0003.266] I> 2) Base:0xc9800000 Size:0x00200000 [0003.267] I> 3) Base:0xc8600000 Size:0x00200000 [0003.269] I> 4) Base:0xc8200000 Size:0x00100000 [0003.274] I> 5) Base:0xc8100000 Size:0x00100000 [0003.278] I> 6) Base:0xc9400000 Size:0x00400000 [0003.283] I> 7) Base:0xc9000000 Size:0x00400000 [0003.287] I> 8) Base:0xc8000000 Size:0x00100000 [0003.291] I> 9) Base:0xc7f00000 Size:0x00100000 [0003.296] I> 10) Base:0xca800000 Size:0x00800000 [0003.300] I> 11) Base:0x40000000 Size:0x00040000 [0003.305] I> 12) Base:0xc7e00000 Size:0x00100000 [0003.309] I> 13) Base:0x40046000 Size:0x00002000 [0003.314] I> 14) Base:0x40048000 Size:0x00002000 [0003.318] I> 15) Base:0xaf000000 Size:0x00004000 [0003.323] I> 16) Base:0x4004a000 Size:0x00002000 [0003.327] I> 17) Base:0xc7c00000 Size:0x00100000 [0003.332] I> 18) Base:0x4004c000 Size:0x00002000 [0003.336] I> 19) Base:0xc9a00000 Size:0x00600000 [0003.341] I> 20) Base:0x4004e000 Size:0x00002000 [0003.345] I> 21) Base:0xc7dc0000 Size:0x0000c000 [0003.349] I> 22) Base:0x00000000 Size:0x00000000 [0003.354] I> 23) Base:0xc7de0000 Size:0x00020000 [0003.358] I> 24) Base:0xcc000000 Size:0x02000000 [0003.363] I> 25) Base:0x40050000 Size:0x00002000 [0003.367] I> 26) Base:0x40040000 Size:0x00006000 [0003.372] I> 27) Base:0xc8c00000 Size:0x00400000 [0003.376] I> 28) Base:0xc8400000 Size:0x00200000 [0003.381] I> 29) Base:0xc8800000 Size:0x00400000 [0003.385] I> 30) Base:0xc7dd0000 Size:0x00010000 [0003.390] I> 31) Base:0x00000000 Size:0x00000000 [0003.394] I> 32) Base:0xf8000000 Size:0x08000000 [0003.399] I> 33) Base:0xce000000 Size:0x2a000000 [0003.403] I> 34) Base:0xcb000000 Size:0x01000000 [0003.407] I> 35) Base:0xae000000 Size:0x01000000 [0003.412] I> 36) Base:0xa0000000 Size:0x0e000000 [0003.416] I> 37) Base:0xca000000 Size:0x00800000 [0003.421] I> 38) Base:0x80000000 Size:0x20000000 [0003.425] I> 39) Base:0xb0000000 Size:0x08000000 [0003.430] I> 40) Base:0x00000000 Size:0x00000000 [0003.434] I> 41) Base:0x00000000 Size:0x00000000 [0003.439] I> 42) Base:0x00000000 Size:0x00000000 [0003.443] I> 43) Base:0x00000000 Size:0x00000000 [0003.448] I> 44) Base:0x00000000 Size:0x00000000 [0003.452] I> 45) Base:0x00000000 Size:0x00000000 [0003.457] GIC-SPI Target CPU: 0 [0003.460] Interrupts Init done [0003.462] calling constructors [0003.465] initializing heap [0003.468] I> Heap: [0xa0960000 ... 0xadf00000] [0003.472] initializing threads [0003.475] initializing timers [0003.478] creating bootstrap completion thread [0003.482] top of bootstrap2() [0003.485] CPU: MIDR: 0x4E0F0040, MPIDR: 0x80000000 [0003.490] initializing platform [0003.493] E> DEVICE_PROD: Invalid value data = 0, size = 0. [0003.498] W> device prod register failed [0003.502] I> Bl_dtb @0xadf00000 [0003.505] I> gpio framework initialized [0003.517] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio' driver [0003.522] I> tegrabl_gpio_driver_register: register 'nvidia,tegra194-gpio-aon' driver [0003.529] I> fixed regulator driver initialized [0003.540] I> register 'maxim' power off handle [0003.542] I> virtual i2c enabled [0003.543] I> registered 'maxim,max20024' pmic [0003.543] I> tegrabl_gpio_driver_register: register 'max20024-gpio' driver [0003.546] I> Boot-device: QSPI [0003.549] I> Boot_device: QSPI_FLASH instance: 0 [0003.554] I> configure_qspi_clk: qparams clk_src = 5, clk_div = 0, clk_src_freq = 800000000, interface_freq = 50000000 [0003.564] I> configure_qspi_clk: FORCING INTERFACE_FREQ TO 133000000!! [0003.571] I> QSPI source rate = 204000 Khz [0003.574] I> Requested rate for QSPI clock = 34000 Khz [0003.580] I> BPMP-set rate for QSPI clk = 34000 Khz [0003.584] I> tx_clk_tap_delay : 0 [0003.587] I> rx_clk_tap_delay : 16 [0003.591] I> QSPI Flash Size = 32 MB [0003.598] I> Qspi initialized successfully [0003.599] I> qspi flash-0 params source = boot args [0003.603] W> No board IDs available [0003.606] E> Failed to get board id info! [0003.612] I> sdmmc-3 params source = safe params [0003.619] I> Found 41 partitions in QSPI_FLASH (instance 0) [0003.621] W> Cannot find any partition table for 00000003 [0003.625] E> Failed to publish 00000003 [0003.634] I> Found 19 partitions in SDMMC_USER (instance 3) [0003.650] I> regulator 'vdd-hdmi-5v0' already enabled [0003.656] I> regulator 'vdd-hdmi-5v0' already enabled [0003.656] I> hdmi cable connected [0003.662] W> set volts not configured for 'vdd-1v0' [0003.667] W> set volts not configured for 'vdd-1v8-hs' [0003.668] I> retrieved tmds range from prod_list_hdmi_soc [0003.674] E> invalid display type [0003.675] E> cannot find any other nvdisp nodes [0003.692] I> edid read success [0003.704] I> edid read success [0003.704] I> width = 640, height = 480, frequency = 25174825 [0003.705] I> width = 1920, height = 1080, frequency = 148500000 [0003.705] I> width = 1280, height = 768, frequency = 79500000 [0003.706] I> width = 1360, height = 768, frequency = 85500000 [0003.706] I> width = 720, height = 480, frequency = 26973026 [0003.710] I> width = 720, height = 576, frequency = 26973026 [0003.715] I> width = 1280, height = 720, frequency = 74175824 [0003.721] I> width = 1280, height = 720, frequency = 74175824 [0003.727] I> width = 1920, height = 1080, frequency = 148351648 [0003.732] I> width = 1920, height = 1080, frequency = 148351648 [0003.738] I> width = 720, height = 480, frequency = 26973026 [0003.744] I> width = 720, height = 576, frequency = 26973026 [0003.749] I> width = 3840, height = 2160, frequency = 296703296 [0003.755] I> width = 3840, height = 2160, frequency = 296703296 [0003.761] I> width = 3840, height = 2160, frequency = 296703296 [0003.767] I> width = 3840, height = 2160, frequency = 296703296 [0003.772] I> width = 4096, height = 2160, frequency = 296703296 [0003.778] I> Best mode Width = 1920, Height = 1080, freq = 148351648 [0003.789] I> hdmi_enable, starting HDMI initialisation [0003.794] I> hdmi_enable, HDMI initialisation complete [0003.803] initializing target [0003.804] calling apps_init() [0003.805] starting app kernel_boot_app [0003.805] I> Kernel type = Normal Jetson UEFI firmware (version 1.0-d7fb19b built on 2022-08-10T20:18:13-07:00) [=3h ** WARNING: Test Key is used. ** L4TLauncher: Attempting Recovery Boot EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x4e0f0040] [ 0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-5273-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Wed Aug 10 20:17:07 PDT 2022 [ 0.000000] Machine model: NVIDIA Jetson Xavier NX Developer Kit [ 0.000000] earlycon: tegra_comb_uart0 at MMIO32 0x000000000c168000 (options '') [ 0.000000] printk: bootconsole [tegra_comb_uart0] enabled [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: RTPROP=0x25a073f98 SMBIOS=0xc7db0000 SMBIOS 3.0=0x2589b0000 MEMATTR=0x259442018 ESRT=0x2587bda18 RNG=0x27c595918 MEMRESERVE=0x259445f18 [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x00000002587bda18 to 0x00000002587bda50. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'fb3_carveout': base 0x0000000000000000, size 0 MiB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000a0973fff] [ 0.000000] node 0: [mem 0x00000000a0974000-0x00000000a0975fff] [ 0.000000] node 0: [mem 0x00000000a0977000-0x00000000aeffffff] [ 0.000000] node 0: [mem 0x00000000af010000-0x00000000c7bfffff] [ 0.000000] node 0: [mem 0x00000000c7d00000-0x00000000c7d9ffff] [ 0.000000] node 0: [mem 0x00000000c7da0000-0x00000000c7dbffff] [ 0.000000] node 0: [mem 0x00000000ca000000-0x00000000ca5fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000002579c8fff] [ 0.000000] node 0: [mem 0x00000002579c9000-0x0000000257b8efff] [ 0.000000] node 0: [mem 0x0000000257b8f000-0x0000000257d2ffff] [ 0.000000] node 0: [mem 0x0000000257d30000-0x000000025859ffff] [ 0.000000] node 0: [mem 0x00000002585a0000-0x00000002586fffff] [ 0.000000] node 0: [mem 0x0000000258700000-0x000000025872ffff] [ 0.000000] node 0: [mem 0x0000000258730000-0x000000025899ffff] [ 0.000000] node 0: [mem 0x00000002589a0000-0x00000002589bffff] [ 0.000000] node 0: [mem 0x00000002589c0000-0x000000025925ffff] [ 0.000000] node 0: [mem 0x0000000259260000-0x00000002593cffff] [ 0.000000] node 0: [mem 0x00000002593d0000-0x000000025944ffff] [ 0.000000] node 0: [mem 0x0000000259450000-0x000000025961ffff] [ 0.000000] node 0: [mem 0x0000000259620000-0x000000025962ffff] [ 0.000000] node 0: [mem 0x0000000259630000-0x000000025971ffff] [ 0.000000] node 0: [mem 0x0000000259720000-0x00000002597affff] [ 0.000000] node 0: [mem 0x00000002597b0000-0x0000000259b4ffff] [ 0.000000] node 0: [mem 0x0000000259b50000-0x0000000259fdffff] [ 0.000000] node 0: [mem 0x0000000259fe0000-0x000000025a01ffff] [ 0.000000] node 0: [mem 0x000000025a020000-0x000000025a1cffff] [ 0.000000] node 0: [mem 0x000000025a1d0000-0x000000025a26ffff] [ 0.000000] node 0: [mem 0x000000025a270000-0x000000025a31ffff] [ 0.000000] node 0: [mem 0x000000025a320000-0x000000025a3bffff] [ 0.000000] node 0: [mem 0x000000025a3c0000-0x000000025a44ffff] [ 0.000000] node 0: [mem 0x000000025a450000-0x000000025a4effff] [ 0.000000] node 0: [mem 0x000000025a4f0000-0x000000025adbffff] [ 0.000000] node 0: [mem 0x000000025adc0000-0x000000025af9ffff] [ 0.000000] node 0: [mem 0x000000025afa0000-0x000000027c54ffff] [ 0.000000] node 0: [mem 0x000000027c550000-0x000000027c59ffff] [ 0.000000] node 0: [mem 0x000000027c5a0000-0x000000027fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027fffffff] [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] cma: Reserved 64 MiB at 0x00000000c3c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 32 pages/cpu s90136 r8192 d32744 u131072 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: NVIDIA Carmel CNP erratum [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1839268 [ 0.000000] Kernel command line: root=/dev/initrd rw rootwait console=ttyTCU0,115200n8 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=tegra_comb_uart,mmio32,0x0c168000 sdhci_tegra.en_boot_part_access=1 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000b3c00000-0x00000000c3c00000] (256MB) [ 0.000000] Memory: 6929312K/7473852K available (18432K kernel code, 3172K rwdata, 7156K rodata, 3968K init, 1095K bss, 479004K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns [ 0.000005] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns [ 0.008738] Console: colour dummy device 80x25 [ 0.012373] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000) [ 0.022499] pid_max: default: 32768 minimum: 301 [ 0.027230] LSM: Security Framework initializing [ 0.031819] Yama: becoming mindful. [ 0.035459] SELinux: Initializing. [ 0.039211] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.046665] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.057329] rcu: Hierarchical SRCU implementation. [ 0.059838] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.068022] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-0001-p3509-0000.dts [ 0.085014] DTB Build time: Aug 10 2022 20:31:49 [ 0.092438] Tegra Revision: A02 SKU: 0xde CPU Process: 0 SoC Process: 0 [ 0.096571] Remapping and enabling EFI services. [ 0.102891] smp: Bringing up secondary CPUs ... ÿä: Secondary CPU 1 initializing I/TC: Secondary CPU 1 switching to normal world boot I/TC: Secondary CPU 2 initializing I/TC: Secondary CPU 2 switching to normal world boot I/TC: Secondary CPU 3 initializing I/TC: Secondary CPU 3 switching to normal world boot I/TC: Secondary CPU 4 initializing I/TC: Secondary CPU 4 switching to normal world boot I/TC: Secondary CPU 5 initializing I/TC: Secondary CPU 5 switching to normal world boot ÿá[ 0.198559] Detected PIPT I-cache on CPU1 [ 0.198631] CPU1: Booted secondary processor 0x0000000001 [0x4e0f0040] [ 0.229497] Detected PIPT I-cache on CPU2 [ 0.229578] CPU2: Booted secondary processor 0x0000000100 [0x4e0f0040] [ 0.259295] Detected PIPT I-cache on CPU3 [ 0.259438] CPU3: Booted secondary processor 0x0000000101 [0x4e0f0040] [ 0.289172] Detected PIPT I-cache on CPU4 [ 0.289333] CPU4: Booted secondary processor 0x0000000200 [0x4e0f0040] [ 0.319072] Detected PIPT I-cache on CPU5 [ 0.319181] CPU5: Booted secondary processor 0x0000000201 [0x4e0f0040] [ 0.319509] smp: Brought up 1 node, 6 CPUs [ 0.320580] SMP: Total of 6 processors activated. [ 0.320722] CPU features: detected: Privileged Access Never [ 0.320824] CPU features: detected: LSE atomic instructions [ 0.320931] CPU features: detected: User Access Override [ 0.321336] CPU features: detected: 32-bit EL0 Support [ 0.321695] CPU features: detected: RAS Extension Support [ 0.322105] CPU features: detected: CRC32 instructions [ 0.322907] CPU features: detected: 32-bit EL1 Support [ 0.394545] CPU: All CPU(s) started at EL2 [ 0.400668] devtmpfs: initialized [ 0.447222] Registered cp15_barrier emulation handler [ 0.447416] Registered setend emulation handler [ 0.447506] KASLR enabled [ 0.447785] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.447967] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.449442] pinctrl core: initialized pinctrl subsystem [ 0.450564] SMBIOS 3.0.0 present. [ 0.450637] DMI: Unknown NVIDIA Jetson Xavier NX Developer Kit/NVIDIA Jetson Xavier NX Developer Kit, BIOS 1.0-d7fb19b 08/10/2022 [ 0.451480] NET: Registered protocol family 16 [ 0.453512] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.454390] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.455430] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.455623] audit: initializing netlink subsys (disabled) [ 0.455968] audit: type=2000 audit(0.400:1): state=initialized audit_enabled=0 res=1 [ 0.456370] thermal_sys: Registered thermal governor 'step_wise' [ 0.456376] thermal_sys: Registered thermal governor 'power_allocator' [ 0.456504] thermal_sys: Registered thermal governor 'pid_thermal_gov' [ 0.460497] cpuidle: using governor menu [ 0.469272] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.476005] ASID allocator initialised with 32768 entries [ 0.481373] Serial: AMBA PL011 UART driver [ 0.487982] Tegra reboot handler registered. [ 0.561067] tegra19x-cbb 2300000.cbb-noc: axi2apb bridge info present [ 0.561386] tegra19x-cbb 2300000.cbb-noc: secure_irq = 15, nonsecure_irq = 14> [ 0.561667] tegra19x-cbb c600000.aon-noc: axi2apb bridge info present [ 0.561832] tegra19x-cbb c600000.aon-noc: secure_irq = 17, nonsecure_irq = 16> [ 0.562091] tegra19x-cbb d600000.bpmp-noc: axi2apb bridge info present [ 0.562266] tegra19x-cbb d600000.bpmp-noc: secure_irq = 19, nonsecure_irq = 18> [ 0.562552] tegra19x-cbb be00000.rce-noc: axi2apb bridge info present [ 0.562696] tegra19x-cbb be00000.rce-noc: secure_irq = 21, nonsecure_irq = 20> [ 0.562948] tegra19x-cbb b600000.sce-noc: axi2apb bridge info present [ 0.563129] tegra19x-cbb b600000.sce-noc: secure_irq = 23, nonsecure_irq = 22> [ 0.565699] mc: mapped MMIO address: 0xffff800010580000 -> 0x2c10000 [ 0.565833] mc: mapped MMIO address: 0xffff8000105a0000 -> 0x2c20000 [ 0.571462] mc: mapped MMIO address: 0xffff8000105c0000 -> 0x2c30000 [ 0.577946] mc: mapped MMIO address: 0xffff8000105e0000 -> 0x2c40000 [ 0.584412] mc: mapped MMIO address: 0xffff800010600000 -> 0x2c50000 [ 0.591004] mc: mapped MMIO address: 0xffff800010620000 -> 0x2b80000 [ 0.597555] mc: mapped MMIO address: 0xffff800010640000 -> 0x2b90000 [ 0.604013] mc: mapped MMIO address: 0xffff800010660000 -> 0x2ba0000 [ 0.610562] mc: mapped MMIO address: 0xffff800010680000 -> 0x2bb0000 [ 0.617062] mc: mapped MMIO address: 0xffff8000106a0000 -> 0x1700000 [ 0.623531] mc: mapped MMIO address: 0xffff8000106c0000 -> 0x1710000 [ 0.630001] mc: mapped MMIO address: 0xffff8000106e0000 -> 0x1720000 [ 0.636389] mc: mapped MMIO address: 0xffff800010700000 -> 0x1730000 [ 0.642763] mc: mapped MMIO address: 0xffff800010720000 -> 0x1740000 [ 0.649159] mc: mapped MMIO address: 0xffff800010740000 -> 0x1750000 [ 0.655553] mc: mapped MMIO address: 0xffff800010760000 -> 0x1760000 [ 0.661961] mc: mapped MMIO address: 0xffff800010780000 -> 0x1770000 [ 0.668151] mc-err: mcerr ops are set to t19x [ 0.684548] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.684729] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.685865] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.692314] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.708642] ACPI: Interpreter disabled. [ 0.709842] vdd-epb-1v0: supplied by vdd-3v3-cvb [ 0.711188] iommu: Default domain type: Translated [ 0.712552] eventlib_kernel: keventlib is initialized, test id: 0 [ 0.719082] SCSI subsystem initialized [ 0.722508] usbcore: registered new interface driver usbfs [ 0.727782] usbcore: registered new interface driver hub [ 0.733285] usbcore: registered new device driver usb [ 0.738688] mc: Linux media interface: v0.10 [ 0.742688] videodev: Linux video capture interface: v2.00 [ 0.748453] pps_core: LinuxPPS API ver. 1 registered [ 0.752995] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.762115] PTP clock support registered [ 0.766245] tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated [ 0.773159] tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec [ 0.780002] tegra_wdt_t18x 30c0000.watchdog: Registered successfully [ 0.786940] Registered efivars operations [ 0.795556] FPGA manager framework [ 0.795718] Advanced Linux Sound Architecture Driver Initialized. [ 0.800389] Bluetooth: Core ver 2.22 [ 0.803507] NET: Registered protocol family 31 [ 0.807778] Bluetooth: HCI device and connection manager initialized [ 0.814178] Bluetooth: HCI socket layer initialized [ 0.818898] Bluetooth: L2CAP socket layer initialized [ 0.824424] Bluetooth: SCO socket layer initialized [ 0.831042] camchar: rtcpu character device driver loaded [ 0.835694] clocksource: Switched to clocksource arch_sys_counter [ 1.129713] VFS: Disk quotas dquot_6.6.0 [ 1.129850] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.130324] pnp: PnP ACPI: disabled [ 1.142100] la/ptsa driver initialized. [ 1.142302] NET: Registered protocol family 2 [ 1.142538] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.147369] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.147637] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.148051] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.148597] TCP: Hash tables configured (established 65536 bind 65536) [ 1.148865] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.149095] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.149474] NET: Registered protocol family 1 [ 1.150393] RPC: Registered named UNIX socket transport module. [ 1.150527] RPC: Registered udp transport module. [ 1.150615] RPC: Registered tcp transport module. [ 1.150693] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.150834] PCI: CLS 0 bytes, default 64 [ 1.151267] Trying to unpack rootfs image as initramfs... [ 1.530423] Freeing initrd memory: 11876K [ 1.534888] hw perfevents: failed to parse interrupt-affinity[6] for arm-pmu [ 1.535040] hw perfevents: /arm-pmu: failed to register PMU devices! [ 1.535179] armv8-pmu: probe of arm-pmu failed with error -22 [ 1.535612] kvm [1]: IPA Size Limit: 40 bits [ 1.536318] kvm [1]: vgic interrupt IRQ9 [ 1.536907] kvm [1]: VHE mode initialized successfully [ 1.538450] Initialise system trusted keyrings [ 1.538908] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.544416] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.545318] NFS: Registering the id_resolver key type [ 1.545456] Key type id_resolver registered [ 1.545557] Key type id_legacy registered [ 1.545720] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.545888] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.546067] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.555991] NET: Registered protocol family 38 [ 1.556110] Key type asymmetric registered [ 1.556198] Asymmetric key parser 'x509' registered [ 1.556366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240) [ 1.556795] io scheduler mq-deadline registered [ 1.556909] io scheduler kyber registered [ 1.562566] tegra186-dpaux-pinctrl 155f0000.dpaux: can not get clock [ 1.565495] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 1.567155] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 1.572694] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 1.578274] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 1.583969] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 1.594978] scrncapt: init (heads:4 wins:6 planes:4) [ 1.595029] tegradccommon 15200000.display-hub: Nvhost Channel map failed [ 1.596239] EINJ: ACPI disabled. [ 1.608058] tegra-pmc c360000.pmc: scratch reg offset dts data not present [ 1.611798] tegra-pmc: ### PMC reset source: SYS_RESET_N [ 1.616956] tegra-pmc: ### PMC reset level: L0 [ 1.621231] tegra-pmc: ### PMC reset status reg: 0x0 [ 1.626251] tegra-pmc: PMC Prod config success [ 1.636116] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.639367] printk: console [ttyTCU0] enabled [ 1.639367] printk: console [ttyTCU0] enabled 1.644967] printk: bootconsole [tegra_comb_uart0] disabled [ 1.644967] printk: bootconsole [tegra_comb_uart0] disabled [ 1.657626] arm-smmu 10000000.iommu: probing hardware configuration... [ 1.662744] arm-smmu 10000000.iommu: SMMUv2 with: [ 1.667492] arm-smmu 10000000.iommu: stage 1 translation [ 1.673158] arm-smmu 10000000.iommu: stage 2 translation [ 1.678132] arm-smmu 10000000.iommu: nested translation [ 1.683717] arm-smmu 10000000.iommu: stream matching with 128 register groups [ 1.691071] arm-smmu 10000000.iommu: 64 context banks (0 stage-2 only) [ 1.702048] arm-smmu 10000000.iommu: Supported page sizes: 0x00001000 [ 1.704196] arm-smmu 10000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.710930] arm-smmu 10000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.718002] arm-smmu 12000000.iommu: probing hardware configuration... [ 1.723617] arm-smmu 12000000.iommu: SMMUv2 with: [ 1.728340] arm-smmu 12000000.iommu: stage 1 translation [ 1.733592] arm-smmu 12000000.iommu: stage 2 translation [ 1.739275] arm-smmu 12000000.iommu: nested translation [ 1.744448] arm-smmu 12000000.iommu: stream matching with 128 register groups [ 1.751625] arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only) [ 1.754749] random: fast init done [ 1.762393] arm-smmu 12000000.iommu: Supported page sizes: 0x00001000 [ 1.768416] arm-smmu 12000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 1.774717] arm-smmu 12000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 1.782278] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful [ 1.791772] tegra_profiler: version: 1.147, samples/io: 49/28 [ 1.795077] tegra_profiler: auth: init [ 1.799602] THERMAL EST: found 3 subdevs [ 1.802986] THERMAL EST num_resources: 0 [ 1.806577] [THERMAL EST subdev 0] [ 1.810236] [THERMAL EST subdev 1] [ 1.813218] [THERMAL EST subdev 2] [ 1.816903] THERMAL EST: Found 2 profiles, default profile is quiet [ 1.823320] THERMAL EST: thz register success. [ 1.827160] THERMAL EST: end of probe, return err: 0 [ 1.832926] nvsciipc: loaded module [ 1.840172] tun: Universal TUN/TAP device driver, 1.6 [ 1.842392] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 1.848666] hns3: Copyright (c) 2017 Huawei Corporation. [ 1.853974] e1000e: Intel(R) PRO/1000 Network Driver [ 1.859152] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.864966] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.870524] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.876674] PPP generic driver version 2.4.2 [ 1.880954] PPP BSD Compression module registered [ 1.885509] PPP Deflate Compression module registered [ 1.890760] PPP MPPE Compression module registered [ 1.895504] usbcore: registered new interface driver r8152 [ 1.901307] usbcore: registered new interface driver asix [ 1.906342] usbcore: registered new interface driver ax88179_178a [ 1.912469] usbcore: registered new interface driver cdc_ether [ 1.918676] usbcore: registered new interface driver net1080 [ 1.924277] usbcore: registered new interface driver cdc_subset [ 1.930060] usbcore: registered new interface driver zaurus [ 1.935765] usbcore: registered new interface driver cdc_ncm [ 1.941447] usbcore: registered new interface driver aqc111 [ 1.947052] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.953411] ohci-pci: OHCI PCI platform driver [ 1.957449] ohci-platform: OHCI generic platform driver [ 1.963312] tegra-xusb 3610000.xhci: Adding to iommu group 0 [ 1.969841] usbcore: registered new interface driver uas [ 1.974051] usbcore: registered new interface driver usb-storage [ 1.979934] tegra-xudc 3550000.xudc: Adding to iommu group 1 [ 1.986208] mousedev: PS/2 mouse device common for all mice [ 1.990919] usbcore: registered new interface driver xpad [ 1.999248] tegra_rtc c2a0000.rtc: registered as rtc1 [ 2.001919] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:25 UTC (25) [ 2.009692] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock [ 2.016283] i2c /dev entries driver [ 2.019541] tegra-i2c 3160000.i2c: Adding to iommu group 2 [ 2.025107] tegra-i2c c240000.i2c: Adding to iommu group 2 [ 2.030695] tegra-i2c 3180000.i2c: Adding to iommu group 2 [ 2.036124] tegra-i2c 3190000.i2c: Adding to iommu group 2 [ 2.041456] tegra-i2c 31b0000.i2c: Adding to iommu group 2 [ 2.046944] tegra-i2c 31c0000.i2c: Adding to iommu group 2 [ 2.052354] tegra-i2c c250000.i2c: Adding to iommu group 2 [ 2.065519] device-mapper: uevent: version 1.0.3 [ 2.066023] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.072776] cpuidle: Initializing cpuidle driver [ 2.076490] sdhci: Secure Digital Host Controller Interface driver [ 2.081257] sdhci: Copyright(c) Pierre Ossman [ 2.085605] Synopsys Designware Multimedia Card Interface Driver [ 2.091525] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.097472] sdhci-tegra 3460000.sdhci: Adding to iommu group 3 [ 2.098368] SMCCC: SOC_ID: ID = jep106:036b:0019 Revision = 0x00000102 [ 2.110990] tegra-bpmp bpmp: firmware: 128431eec76692047e1ac1ebc0392266 [ 2.132006] max77620 4-003c: PMIC Version OTP:0x51 and ES:0x1 [ 2.142307] vdd-1v0: supplied by regulator-dummy [ 2.148100] vdd-1v8-hs: supplied by regulator-dummy [ 2.153242] vdd-1v8-ls: supplied by regulator-dummy [ 2.158283] vdd-1v8-ao: supplied by regulator-dummy [ 2.162602] vddio-ddr-1v1: supplied by regulator-dummy [ 2.167618] vdd-rtc: supplied by regulator-dummy [ 2.169726] spmic-ldo1: supplied by regulator-dummy [ 2.171515] vdd-ao-3v3: supplied by regulator-dummy [ 2.178356] vddio-emmc-3v3: supplied by regulator-dummy [ 2.184927] spmic-ldo4: supplied by regulator-dummy [ 2.186789] vdd-usb-3v3: supplied by regulator-dummy [ 2.193501] vddio-sdmmc1-3v3: supplied by regulator-dummy [ 2.200393] vdd-csi-1v2: supplied by vdd-1v8-ls [ 2.206477] spmic-ldo8: supplied by vdd-1v8-ls [ 2.208858] gpio-510 (gpio_default): hogged as output/high [ 2.210789] gpio-511 (gpio_default): hogged as output/high [ 2.213759] gpiochip0: registered GPIOs 504 to 511 on max77620-gpio [ 2.349490] max77686-rtc max77620-rtc: registered as rtc0 [ 2.350825] max77620-power max20024-power: Event recorder REG_NVERC : 0x40 [ 2.351150] max77620 4-003c: max77620 probe successful ÿârm_rail_debugfs_init: /rm/vdd_cpu: failed rm_rail_debugfs_init: /rm/vdd_cpu: failed debugfs initialized ÿá[ 3.187794] tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete [ 3.188878] hid: raw HID events driver (C) Jiri Kosina [ 3.189713] usbcore: registered new interface driver usbhid [ 3.189842] usbhid: USB HID core driver [ 3.191863] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 4 [ 3.193172] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000 ÿå[ 26.156291] Camera-FW on t194-rce-safe started TCU early console enabled. [ 26.230540] Camera-FW on t194-rce-safe ready SHA1=d48f1e27 (crt 0.777 ms, total boot 75.055 ms) ÿá[ 3.277629] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584 [ 3.278185] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900 [ 3.279403] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80 [ 3.280239] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80 [ 3.281901] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80 [ 3.282662] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080 [ 3.283328] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200 [ 3.284883] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (49) [ 3.285132] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful [ 3.288605] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=d48f1e279e6679b09020947e8de088eabfeaa475 [ 3.294622] tegra_aon c1a0000.aon: Adding to iommu group 5 [ 3.300941] tegra_aon c1a0000.aon: tegra aon driver probe OK [ 3.306066] tegra186-aondbg aondbg: aondbg driver probe() OK [ 3.312557] denver_knobs_init:MTS_VERSION:55637613 [ 3.324467] t19x_cache tegra-cache: probed [ 3.327414] optee: probing for conduit method. [ 3.328504] optee: revision 3.16 (65cc2218) [ 3.329851] optee: dynamic shared memory is enabled [ 3.332662] optee: initialized driver [ 3.340117] nvpmodel: initialized successfully [ 3.340804] tegra_hv: get_hvd: not initialized yet [ 3.345145] user_ivc_mempool: hypervisor not present [ 3.351063] usbcore: registered new interface driver snd-usb-audio [ 3.357583] u32 classifier [ 3.358810] input device check on [ 3.362641] Actions configured [ 3.365984] Initializing XFRM netlink socket [ 3.370855] NET: Registered protocol family 10 [ 3.378321] Segment Routing with IPv6 [ 3.378634] NET: Registered protocol family 17 [ 3.382812] NET: Registered protocol family 15 [ 3.386862] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.400315] Bluetooth: RFCOMM socket layer initialized [ 3.405132] Bluetooth: RFCOMM ver 1.11 [ 3.409269] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.414866] Bluetooth: HIDP socket layer initialized [ 3.420904] 9pnet: Installing 9P2000 support [ 3.424552] Key type dns_resolver registered [ 3.429846] registered taskstats version 1 [ 3.433066] Loading compiled-in X.509 certificates [ 3.445681] Loaded X.509 cert 'Build time autogenerated kernel key: 90ac610178c49616e6b7af33d5f8183bf0ea1ee9' [ 3.448529] tegra194-pcie 14160000.pcie: Adding to iommu group 6 [ 3.459031] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges: [ 3.460704] tegra194-pcie 14160000.pcie: IO 0x0036100000..0x00361fffff -> 0x0036100000 [ 3.469624] tegra194-pcie 14160000.pcie: MEM 0x1400000000..0x173fffffff -> 0x1400000000 [ 3.477896] tegra194-pcie 14160000.pcie: MEM 0x1740000000..0x17ffffffff -> 0x0040000000 [ 3.595788] tegra194-pcie 14160000.pcie: Link up [ 3.598966] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00 [ 3.599198] pci_bus 0004:00: root bus resource [bus 00-ff] [ 3.599386] pci_bus 0004:00: root bus resource [io 0x0000-0xfffff] (bus address [0x36100000-0x361fffff]) [ 3.599640] pci_bus 0004:00: root bus resource [mem 0x1400000000-0x173fffffff pref] [ 3.599888] pci_bus 0004:00: root bus resource [mem 0x1740000000-0x17ffffffff] (bus address [0x40000000-0xffffffff]) [ 3.600272] pci 0004:00:00.0: [10de:1ad1] type 01 class 0x060400 [ 3.600770] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 3.613130] pci 0004:01:00.0: [10ec:c822] type 00 class 0x028000 [ 3.613602] pci 0004:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 3.614086] pci 0004:01:00.0: reg 0x18: [mem 0x1740000000-0x174000ffff 64bit] [ 3.615887] pci 0004:01:00.0: supports D1 D2 [ 3.616034] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 3.627105] pci 0004:00:00.0: BAR 14: assigned [mem 0x1740000000-0x17400fffff] [ 3.627520] pci 0004:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 3.628087] pci 0004:01:00.0: BAR 2: assigned [mem 0x1740000000-0x174000ffff 64bit] [ 3.628660] pci 0004:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.628973] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 3.629231] pci 0004:00:00.0: bridge window [io 0x1000-0x1fff] [ 3.630299] pci 0004:00:00.0: bridge window [mem 0x1740000000-0x17400fffff] [ 3.637771] pci 0004:00:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 512 [ 3.646544] pci 0004:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 [ 3.656756] pcieport 0004:00:00.0: Adding to iommu group 6 [ 3.660979] pcieport 0004:00:00.0: PME: Signaling with IRQ 24 [ 3.666694] pcieport 0004:00:00.0: AER: enabled with IRQ 24 [ 3.673725] tegra194-pcie 141a0000.pcie: Adding to iommu group 7 [ 3.682797] tegra194-pcie 141a0000.pcie: host bridge /pcie@141a0000 ranges: [ 3.684454] tegra194-pcie 141a0000.pcie: IO 0x003a100000..0x003a1fffff -> 0x003a100000 [ 3.692656] tegra194-pcie 141a0000.pcie: MEM 0x1c00000000..0x1f3fffffff -> 0x1c00000000 [ 3.701384] tegra194-pcie 141a0000.pcie: MEM 0x1f40000000..0x1fffffffff -> 0x0040000000 [ 4.816519] tegra194-pcie 141a0000.pcie: Phy link never came up [ 4.816995] tegra194-pcie 141a0000.pcie: PCI host bridge to bus 0005:00 [ 4.817257] pci_bus 0005:00: root bus resource [bus 00-ff] [ 4.817385] pci_bus 0005:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3a100000-0x3a1fffff]) [ 4.817728] pci_bus 0005:00: root bus resource [mem 0x1c00000000-0x1f3fffffff pref] [ 4.817939] pci_bus 0005:00: root bus resource [mem 0x1f40000000-0x1fffffffff] (bus address [0x40000000-0xffffffff]) [ 4.818355] pci 0005:00:00.0: [10de:1ad0] type 01 class 0x060400 [ 4.818775] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 4.836377] pci 0005:00:00.0: PCI bridge to [bus 01-ff] [ 4.836702] pci 0005:00:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 512 [ 4.838474] pcieport 0005:00:00.0: Adding to iommu group 7 [ 4.840021] pcieport 0005:00:00.0: PME: Signaling with IRQ 26 [ 4.841366] pcieport 0005:00:00.0: AER: enabled with IRQ 26 [ 4.843247] pci_bus 0005:01: busn_res: [bus 01-ff] is released [ 4.844501] pci 0005:00:00.0: Removing from iommu group 7 [ 4.844819] pci_bus 0005:00: busn_res: [bus 00-ff] is released [ 4.879011] host1x 13e10000.host1x: Adding to iommu group 8 [ 4.900300] host1x 13e10000.host1x: initialized [ 4.901562] iommu_context_dev 13e10000.host1x:ctx0: Adding to iommu group 9 [ 4.902409] iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56, iommu=smmu.0x0000000012000000) [ 4.903829] iommu_context_dev 13e10000.host1x:ctx1: Adding to iommu group 10 [ 4.904521] iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57, iommu=smmu.0x0000000012000000) [ 4.905604] iommu_context_dev 13e10000.host1x:ctx2: Adding to iommu group 11 [ 4.906296] iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58, iommu=smmu.0x0000000012000000) [ 4.907268] iommu_context_dev 13e10000.host1x:ctx3: Adding to iommu group 12 [ 4.907960] iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59, iommu=smmu.0x0000000012000000) [ 4.909784] iommu_context_dev 13e10000.host1x:ctx4: Adding to iommu group 13 [ 4.916558] iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60, iommu=smmu.0x0000000012000000) [ 4.926476] iommu_context_dev 13e10000.host1x:ctx5: Adding to iommu group 14 [ 4.933759] iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61, iommu=smmu.0x0000000012000000) [ 4.943592] iommu_context_dev 13e10000.host1x:ctx6: Adding to iommu group 15 [ 4.950761] iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62, iommu=smmu.0x0000000012000000) [ 4.960554] iommu_context_dev 13e10000.host1x:ctx7: Adding to iommu group 16 [ 4.967768] iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63, iommu=smmu.0x0000000012000000) [ 4.977489] falcon 15340000.vic: Adding to iommu group 17 [ 4.991648] falcon 15340000.vic: initialized [ 4.992713] falcon 15380000.nvjpg: Adding to iommu group 17 [ 4.998189] falcon 15380000.nvjpg: initialized [ 4.998786] falcon 154c0000.nvenc: Adding to iommu group 17 [ 5.010519] falcon 154c0000.nvenc: initialized [ 5.011040] falcon 15a80000.nvenc1: Adding to iommu group 17 [ 5.020097] falcon 15a80000.nvenc1: initialized [ 5.020719] nvdec 15480000.nvdec: Adding to iommu group 17 [ 5.032762] nvdec 15480000.nvdec: initialized [ 5.033305] nvdec 15140000.nvdec1: Adding to iommu group 17 [ 5.041862] nvdec 15140000.nvdec1: initialized [ 5.042358] tsec 15500000.tsec: Adding to iommu group 18 [ 5.048883] tsec 15500000.tsec: initialized [ 5.049297] tsec 15100000.tsecb: Adding to iommu group 19 [ 5.057917] tsec 15100000.tsecb: initialized [ 5.061710] gic 2a41000.agic-controller: GIC IRQ controller registered [ 5.084857] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered [ 5.095890] gpio-374 (wifi-enable): hogged as output/high [ 5.096198] gpio-431 (camera-control-output-low): hogged as output/low [ 5.096451] gpio-432 (camera-control-output-low): hogged as output/low [ 5.098155] gpiochip1: registered GPIOs 335 to 503 on tegra194-gpio [ 5.100522] gpiochip2: registered GPIOs 305 to 334 on tegra194-gpio-aon [ 5.101917] tegra-pwm 3280000.pwm: PWM clk can sleep in ops [ 5.108883] tegra-pwm c340000.pwm: PWM clk can sleep in ops [ 5.113817] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops [ 5.119946] tegra-pwm 32d0000.pwm: PWM clk can sleep in ops [ 5.125434] tegra-pwm 32f0000.pwm: PWM clk can sleep in ops [ 5.133307] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000 [ 5.141290] tegra194-isp5 13e10000.host1x:isp@14800000: Adding to iommu group 20 [ 5.152290] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU [ 5.157897] t194-nvcsi 13e10000.host1x:nvcsi@15a00000: initialized [ 5.163881] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.172705] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e10000.host1x:nvcsi@15a00000- bound [ 5.181665] tegra194-vi5 15c10000.vi: Adding to iommu group 21 [ 5.188765] scare-pigeon 13e10000.host1x:vi-thi@15f00000: context isolation disabled due to no IOMMU [ 5.196812] scare-pigeon 13e10000.host1x:vi-thi@15f00000: initialized [ 5.202762] scare-pigeon 13e10000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU [ 5.212705] scare-pigeon 13e10000.host1x:isp-thi@14b00000: initialized [ 5.218676] pva 16000000.pva0: Adding to iommu group 22 [ 5.244321] pva 16000000.pva0: initialized [ 5.249449] pva 16800000.pva1: Adding to iommu group 23 [ 5.260086] pva 16800000.pva1: initialized [ 5.264524] nvdla 15880000.nvdla0: Adding to iommu group 24 [ 5.284292] nvdla 15880000.nvdla0: initialized [ 5.285761] nvdla 158c0000.nvdla1: Adding to iommu group 25 [ 5.301217] nvdla 158c0000.nvdla1: initialized [ 5.302494] tegra_cec 3960000.tegra_cec: dt=1 start=0x03960000 end=0x03960FFF irq=63 [ 5.302767] tegra_cec 3960000.tegra_cec: Unpowergated DISP [ 5.303439] tegra_cec 3960000.tegra_cec: Enable clock result: 0. [ 5.304074] tegra_cec 3960000.tegra_cec: tegra_cec_init started [ 5.304364] tegra_cec 3960000.tegra_cec: cec_add_sysfs ret=0 [ 5.304538] tegra_cec 3960000.tegra_cec: probed [ 5.306388] tegradc 15200000.display: Adding to iommu group 26 [ 5.314310] tegra-gpcdma 2600000.dma: Adding to iommu group 2 [ 5.316305] tegradc 15210000.display: Adding to iommu group 26 [ 5.316639] tegradccommon 15200000.display-hub: host1x channel mapped [ 5.317160] tegradccommon 15200000.display-hub: dc_common syncpt # 1 allocated [ 5.319220] tegra-gpcdma 2600000.dma: GPC DMA driver register 31 channels [ 5.324652] tegradccommon 15200000.display-hub: dma mapping done [ 5.331730] kfuse 3830000.kfuse: initialized [ 5.342216] tegra-fuse-burn efuse-burn: shutdown limit check disabled [ 5.348119] tegra-fuse-burn efuse-burn: Fuse burn driver initialized [ 5.354873] serial-tegra 3100000.serial: Adding to iommu group 2 [ 5.361135] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 31, base_baud = 0) is a TEGRA_UART [ 5.370259] serial-tegra 3110000.serial: Adding to iommu group 2 [ 5.375520] 3110000.serial: ttyTHS1 at MMIO 0x3110000 (irq = 32, base_baud = 0) is a TEGRA_UART [ 5.384494] serial-tegra 3140000.serial: Adding to iommu group 2 [ 5.390178] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 33, base_baud = 0) is a TEGRA_UART [ 5.409958] tegra-xusb 3610000.xhci: Firmware timestamp: 2022-03-16 11:07:43 UTC, Version: 60.13 release [ 5.410324] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.413598] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1 [ 5.421926] tegra-xusb 3610000.xhci: hcc params 0x0184ff25 hci version 0x110 quirks 0x0000000000050810 [ 5.430398] tegra-xusb 3610000.xhci: irq 189, io mem 0x03610000 [ 5.437147] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 5.444590] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.451727] usb usb1: Product: xHCI Host Controller [ 5.456951] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 5.463247] usb usb1: SerialNumber: 3610000.xhci [ 5.468729] hub 1-0:1.0: USB hub found [ 5.471874] hub 1-0:1.0: 4 ports detected [ 5.476307] tegra-xusb 3610000.xhci: xHCI Host Controller [ 5.480959] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2 [ 5.488821] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed [ 5.496504] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 5.504154] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.511410] usb usb2: Product: xHCI Host Controller [ 5.516641] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd [ 5.522839] usb usb2: SerialNumber: 3610000.xhci [ 5.528220] hub 2-0:1.0: USB hub found [ 5.531317] hub 2-0:1.0: 4 ports detected [ 5.572624] tegra-i2c 31e0000.i2c: Adding to iommu group 2 [ 5.578089] i2c i2c-2: Added multiplexed i2c bus 9 [ 5.579253] i2c i2c-2: Added multiplexed i2c bus 10 [ 5.579436] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter [ 5.592811] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1907000 KHz, changing to: 1907200 KHz [ 5.593928] tegra194-cpufreq ccplex: probed with BWMGR [ 5.595076] sdhci-tegra 3460000.sdhci: BWMGR client registration for eMC Successful [ 5.595738] irq: IRQ263: trimming hierarchy from :pmc@c360000 [ 5.596239] usb-conn-gpio 3520000.xusb_padctl:ports:usb2-0:connector: repeated role: 0 [ 5.597806] tegra194-isp5 13e10000.host1x:isp@14800000: initialized [ 5.606801] mmc0: CQHCI version 5.10 [ 5.608158] tegra194-vi5 15c10000.vi: initialized [ 5.610162] tegradc 15200000.display: disp0 connected to head0->sor1 [ 5.611648] nvethernet 2490000.ethernet: Adding to iommu group 27 [ 5.615366] generic_infoframe_type: 0x87 [ 5.621510] nvethernet 2490000.ethernet: failed to read skip mac reset flag, default 0 [ 5.625072] tegradc 15200000.display: DT parsed successfully [ 5.633458] nvethernet 2490000.ethernet: failed to read MDIO address [ 5.638740] tegradc 15200000.display: Display dc.(____ptrval____) registered with id=0 [ 5.642771] mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit [ 5.645507] nvethernet 2490000.ethernet: setting to default DMA bit mask [ 5.654433] tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 15681600 KB/s [ 5.660923] nvethernet 2490000.ethernet: set default TXQ to TC mapping [ 5.660932] nvethernet 2490000.ethernet: Setting default PTP RX queue [ 5.667990] tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 933000000 Hz [ 5.667994] tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 300000000 Hz [ 5.668321] tegradc 15200000.display: vblank syncpt # 8 for dc 0 [ 5.683738] nvethernet 2490000.ethernet: failed to get eqos_rx_m clk [ 5.688838] tegradc 15200000.display: vpulse3 syncpt # 9 for dc 0 [ 5.697221] nvethernet 2490000.ethernet: failed to get eqos_rx_input clk [ 5.697229] nvethernet 2490000.ethernet: failed to get eqos_tx_divider clk [ 5.705724] tegradc 15200000.display: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937 [ 5.712559] nvethernet 2490000.ethernet: Ethernet MAC address: 48:b0:2d:50:d5:a3 [ 5.718974] tegradc 15200000.display: hdmi: invalid prod list prod_list_hdmi_board [ 5.729513] mmc0: Command Queue Engine enabled [ 5.729517] mmc0: periodic cache flush enabled [ 5.729528] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 5.730000] mmcblk0: mmc0:0001 DG4016 14.7 GiB [ 5.730190] mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB [ 5.730324] mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB [ 5.730443] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB, chardev (510:0) [ 5.730737] tegradc 15200000.display: hdmi: tegra_hdmi_tmds_range_read(bd) failed [ 5.734274] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 [ 5.739697] usb 1-2: new high-speed USB device number 2 using tegra-xusb [ 5.750450] tegradc 15200000.display: probed [ 5.756124] nvethernet 2490000.ethernet: Macsec not supported [ 5.757420] nvethernet 2490000.ethernet: eth0 (HW ver: 50) created with 1 DMA channels [ 5.843819] Console: switching to colour frame buffer device 240x67 [ 5.844822] irq: IRQ265: trimming hierarchy from :pmc@c360000 [ 5.849303] tegradc 15200000.display: fb registered [ 5.860100] irq: IRQ266: trimming hierarchy from :pmc@c360000 [ 5.865793] irq: IRQ267: trimming hierarchy from :interrupt-controller@3881000 [ 5.866839] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 5.873246] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 5.879254] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 5.887184] tegra-se-nvhost 15810000.se: Adding to iommu group 28 [ 5.899544] tegra-se-nvhost 15810000.se: initialized [ 5.904206] tegra-se-nvhost 15810000.se: tegra_se_probe: complete [ 5.909461] tegra-se-nvhost 15820000.se: Adding to iommu group 29 [ 5.911259] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40 [ 5.915858] tegra-se-nvhost 15820000.se: initialized [ 5.923497] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.923502] usb 1-2: Product: 4-Port USB 2.0 Hub [ 5.923506] usb 1-2: Manufacturer: Generic [ 5.925577] hub 1-2:1.0: USB hub found [ 5.930352] tegra-se-nvhost 15820000.se: tegra_se_probe: complete [ 5.940496] hub 1-2:1.0: 4 ports detected [ 5.945080] tegra-se-nvhost 15830000.se: Adding to iommu group 30 [ 5.960512] tegradc 15200000.display: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m [ 5.965823] tegra-se-nvhost 15830000.se: initialized [ 5.979588] tegradc 15200000.display: hdmi: get RGB quant from REG programmed by BL. [ 5.980403] tegra-se-nvhost 15830000.se: tegra_se_probe: complete [ 5.986765] tegradc 15200000.display: hdmi: get YCC quant from REG programmed by BL. [ 6.000923] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.000968] tegra-se-nvhost 15840000.se: Adding to iommu group 31 [ 6.007587] Extcon AUX1(HDMI) enable [ 6.007851] tegradc 15210000.display: disp1 connected to head1->sor [ 6.014604] tegra-se-nvhost 15840000.se: initialized [ 6.017367] tegradc 15210000.display: parse_dp_settings: No dp-lt-settings node [ 6.025205] tegra-se-nvhost 15840000.se: tegra_se_probe: complete [ 6.028574] tegradc 15210000.display: DT parsed successfully [ 6.036879] tegra_actmon d230000.actmon: in actmon_register()... [ 6.041973] tegradc 15210000.display: Display dc.(____ptrval____) registered with id=1 [ 6.047608] tegra_actmon d230000.actmon: bwmgr_disable = 0 [ 6.053630] usb 2-3: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb [ 6.053772] tegradc 15210000.display: vblank syncpt # 15 for dc 1 [ 6.053780] tegradc 15210000.display: vpulse3 syncpt # 16 for dc 1 [ 6.061985] tegra_actmon d230000.actmon: initialization Completed for the device mc_all [ 6.095528] hvc_sysfs: hypervisor is not present [ 6.096906] tegradc 15210000.display: probed [ 6.104133] tegradc 15210000.display: fb registered [ 6.111625] usb 2-3: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40 [ 6.117058] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.124405] usb 2-3: Product: 4-Port USB 3.0 Hub [ 6.126213] ALSA device list: [ 6.128943] usb 2-3: Manufacturer: Generic [ 6.130981] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1 [ 6.132102] No soundcards found. [ 6.139592] hub 2-3:1.0: USB hub found [ 6.143670] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset) [ 6.148944] hub 2-3:1.0: 4 ports detected [ 6.151086] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0 ÿâWARNING: clock_disable: clk_power_ungate on gated domain 27 for gpcclk ÿá[ 6.168554] tegradc 15200000.display: blank - powerdown [ 6.169495] Freeing unused kernel memory: 3968K [ 6.179871] Run /init as init process [ 6.210934] extcon-disp-state external-connection:disp-state: cable 47 state 0 [ 6.210938] Extcon AUX1(HDMI) disable [ 6.231686] usb 1-3: new full-speed USB device number 3 using tegra-xusb [ 6.234231] tegra_nvdisp_handle_pd_disable: Powergated Head1 pd [ 6.235071] tegra_nvdisp_handle_pd_disable: Powergated Head0 pd [ 6.247041] tegradc 15200000.display: unblank [ 6.248346] tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd [ 6.248543] tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd [ 6.254513] tegradc 15200000.display: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m [ 6.256374] tegradc 15200000.display: hdmi: get YCC quant from EDID. [ 6.260389] extcon-disp-state external-connection:disp-state: cable 47 state 1 [ 6.260393] Extcon AUX1(HDMI) enable [ 6.273142] tegradc 15200000.display: sync windows ret = 247 [ 6.275826] tegradc 15210000.display: blank - powerdown [ 6.278493] extcon-disp-state external-connection:disp-state: cable 44 state 0 already set. [ 6.278496] Extcon DP: HPD disabled [ 6.278501] hpd: switching from state 0 (Reset) to state 1 (Check Plug) [ 6.278513] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0 [ 6.278517] hpd: switching from state 1 (Check Plug) to state 3 (Disabled) [ 6.310476] extcon-disp-state external-connection:disp-state: cable 53 state 1 [ 6.317464] Extcon HDMI: HPD enabled [ 6.321109] tegradc 15200000.display: hdmi: plugged [ 6.323703] tegra_cec 3960000.tegra_cec: physical address: 10:00. [ 6.360650] Root device found: initrd [ 6.362295] Mount initrd as rootfs and enter recovery mode [ 6.380935] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00 [ 6.381198] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.381401] usb 1-3: Product: Bluetooth Radio [ 6.381510] usb 1-3: Manufacturer: Realtek [ 6.381634] usb 1-3: SerialNumber: 00e04c000001 [ 6.388254] tegra_cec 3960000.tegra_cec: Sent res: -113. [ 6.388439] tegra_cec 3960000.tegra_cec: tegra_cec_init Done. Finding OTA work dir on external storage devices Checking whether device /dev/mmcblk?p1 exist Looking for OTA work directory on the device(s): /dev/mmcblk0p1 Checking whether device /dev/sd?1 exist Device /dev/sd?1 does not exist Checking whether device /dev/nvme?n1p1 exist Device /dev/nvme?n1p1 does not exist Finding OTA work dir on internal storage device [ 6.465145] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) OTA work directory /mnt/ota_work is not found on /dev/mmcblk0p1 OTA work directory is not found on internal and external storage devices bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell bash-5.0# [ 38.003739] vdd-1v8-sd: disabling [ 38.003854] vdd-3v3-cvb: disabling [ 38.003949] vdd-1v8-cvb: disabling [ 38.004021] vdd-epb-1v0: disabling [ 38.004096] vdd-fan: disabling [ 38.004171] vdd_sys_en: disabling [ 54.273037] random: crng init done